- information on EDAC - Error Detection And Correction
eisa.txt
- info on EISA bus support.
-exception.txt
- - how Linux v2.2 handles exceptions without verify_area etc.
fault-injection/
- dir with docs about the fault injection capabilities infrastructure.
fb/
- info on typical Linux memory problems.
mips/
- directory with info about Linux on MIPS architecture.
+mmc/
+ - directory with info about the MMC subsystem
mono.txt
- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
mutex-design.txt
0 -> resumed
(_UDC_ is the name of the USB Device Controller driver)
+
+What: /sys/devices/platform/_UDC_/gadget/gadget-lunX/nofua
+Date: July 2010
+Contact: Andy Shevchenko <andy.shevchenko@gmail.com>
+Description:
+ Show or set the reaction on the FUA (Force Unit Access) bit in
+ the SCSI WRITE(10,12) commands when a gadget in USB Mass
+ Storage mode.
+
+ Possible values are:
+ 1 -> ignore the FUA flag
+ 0 -> obey the FUA flag
CONFIG_NEED_SG_DMA_LENGTH if the architecture supports IOMMUs
(including software IOMMU).
-2) ARCH_KMALLOC_MINALIGN
+2) ARCH_DMA_MINALIGN
Architectures must ensure that kmalloc'ed buffer is
DMA-safe. Drivers and subsystems depend on it. If an architecture
isn't fully DMA-coherent (i.e. hardware doesn't ensure that data in
the CPU cache is identical to data in main memory),
- ARCH_KMALLOC_MINALIGN must be set so that the memory allocator
+ ARCH_DMA_MINALIGN must be set so that the memory allocator
makes sure that kmalloc'ed buffer doesn't share a cache line with
the others. See arch/arm/include/asm/cache.h as an example.
- Note that ARCH_KMALLOC_MINALIGN is about DMA memory alignment
+ Note that ARCH_DMA_MINALIGN is about DMA memory alignment
constraints. You don't need to worry about the architecture data
alignment constraints (e.g. the alignment constraints about 64-bit
objects).
+3) Supporting multiple types of IOMMUs
+
+ If your architecture needs to support multiple types of IOMMUs, you
+ can use include/linux/asm-generic/dma-mapping-common.h. It's a
+ library to support the DMA API with multiple types of IOMMUs. Lots
+ of architectures (x86, powerpc, sh, alpha, ia64, microblaze and
+ sparc) use it. Choose one to see how it can be used. If you need to
+ support multiple types of IOMMUs in a single system, the example of
+ x86 or powerpc helps.
+
Closing
This document, and the API itself, would not be in its current
be identical to those passed in (and returned by
dma_alloc_noncoherent()).
-int
-dma_is_consistent(struct device *dev, dma_addr_t dma_handle)
-
-Returns true if the device dev is performing consistent DMA on the memory
-area pointed to by the dma_handle.
-
int
dma_get_cache_alignment(void)
PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs xmldoclinks
BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
-xmldocs: $(BOOKS) xmldoclinks
+xmldocs: $(BOOKS)
sgmldocs: xmldocs
PS := $(patsubst %.xml, %.ps, $(BOOKS))
pdfdocs: $(PDF)
HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
-htmldocs: $(HTML)
+htmldocs: $(HTML) xmldoclinks
$(call build_main_index)
$(call build_images)
) > $(dir $@).$(notdir $@).cmd
endef
-%.xml: %.tmpl FORCE
+%.xml: %.tmpl xmldoclinks FORCE
$(call if_changed_rule,docproc)
###
<title>FIFO Buffer</title>
<sect1><title>kfifo interface</title>
!Iinclude/linux/kfifo.h
-!Ekernel/kfifo.c
</sect1>
</chapter>
and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls.</para>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term>LIRC_SET_WIDEBAND_RECEIVER</term>
+ <listitem>
+ <para>Some receivers are equipped with special wide band receiver which is intended
+ to be used to learn output of existing remote.
+ Calling that ioctl with (1) will enable it, and with (0) disable it.
+ This might be useful of receivers that have otherwise narrow band receiver
+ that prevents them to be used with some remotes.
+ Wide band receiver might also be more precise
+ On the other hand its disadvantage it usually reduced range of reception.
+ Note: wide band receiver might be implictly enabled if you enable
+ carrier reports. In that case it will be disabled as soon as you disable
+ carrier reports. Trying to disable wide band receiver while carrier
+ reports are active will do nothing.</para>
+ </listitem>
+ </varlistentry>
</variablelist>
</section>
<entry>r<subscript>1</subscript></entry>
<entry>r<subscript>0</subscript></entry>
</row>
+ <row id="V4L2-PIX-FMT-BGR666">
+ <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
+ <entry>'BGRH'</entry>
+ <entry></entry>
+ <entry>b<subscript>5</subscript></entry>
+ <entry>b<subscript>4</subscript></entry>
+ <entry>b<subscript>3</subscript></entry>
+ <entry>b<subscript>2</subscript></entry>
+ <entry>b<subscript>1</subscript></entry>
+ <entry>b<subscript>0</subscript></entry>
+ <entry>g<subscript>5</subscript></entry>
+ <entry>g<subscript>4</subscript></entry>
+ <entry></entry>
+ <entry>g<subscript>3</subscript></entry>
+ <entry>g<subscript>2</subscript></entry>
+ <entry>g<subscript>1</subscript></entry>
+ <entry>g<subscript>0</subscript></entry>
+ <entry>r<subscript>5</subscript></entry>
+ <entry>r<subscript>4</subscript></entry>
+ <entry>r<subscript>3</subscript></entry>
+ <entry>r<subscript>2</subscript></entry>
+ <entry></entry>
+ <entry>r<subscript>1</subscript></entry>
+ <entry>r<subscript>0</subscript></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ </row>
<row id="V4L2-PIX-FMT-BGR24">
<entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
<entry>'BGR3'</entry>
<entry>b<subscript>1</subscript></entry>
<entry>b<subscript>0</subscript></entry>
</row>
+ <row id="V4L2-PIX-FMT-BGR666">
+ <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
+ <entry>'BGRH'</entry>
+ <entry></entry>
+ <entry>b<subscript>5</subscript></entry>
+ <entry>b<subscript>4</subscript></entry>
+ <entry>b<subscript>3</subscript></entry>
+ <entry>b<subscript>2</subscript></entry>
+ <entry>b<subscript>1</subscript></entry>
+ <entry>b<subscript>0</subscript></entry>
+ <entry>g<subscript>5</subscript></entry>
+ <entry>g<subscript>4</subscript></entry>
+ <entry></entry>
+ <entry>g<subscript>3</subscript></entry>
+ <entry>g<subscript>2</subscript></entry>
+ <entry>g<subscript>1</subscript></entry>
+ <entry>g<subscript>0</subscript></entry>
+ <entry>r<subscript>5</subscript></entry>
+ <entry>r<subscript>4</subscript></entry>
+ <entry>r<subscript>3</subscript></entry>
+ <entry>r<subscript>2</subscript></entry>
+ <entry></entry>
+ <entry>r<subscript>1</subscript></entry>
+ <entry>r<subscript>0</subscript></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ </row>
<row><!-- id="V4L2-PIX-FMT-BGR24" -->
<entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
<entry>'BGR3'</entry>
"Device", "OperationRegion", are not recognized.
Note: The same ACPI control method can be overridden for many times,
and it's always the latest one that used by Linux/kernel.
+Note: To get the ACPI debug object output (Store (AAAA, Debug)),
+ please run "echo 1 > /sys/module/acpi/parameters/aml_debug_output".
1. override an existing method
a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT,
Maintainers:
CPU Hotplug Core:
- Rusty Russell <rusty@rustycorp.com.au>
+ Rusty Russell <rusty@rustcorp.com.au>
Srivatsa Vaddagiri <vatsa@in.ibm.com>
i386:
Zwane Mwaikambo <zwane@arm.linux.org.uk>
233 = /dev/kmview View-OS A process with a view
234 = /dev/btrfs-control Btrfs control device
235 = /dev/autofs Autofs control device
+ 236 = /dev/mapper/control Device-Mapper control device
240-254 Reserved for local use
255 Reserved for MISC_DYNAMIC_MINOR
Why: Should be implemented in userspace, policy daemon.
Who: Johannes Berg <johannes@sipsolutions.net>
----------------------------
-
-What: CONFIG_INOTIFY
-When: 2.6.33
-Why: last user (audit) will be converted to the newer more generic
- and more easily maintained fsnotify subsystem
-Who: Eric Paris <eparis@redhat.com>
-
----------------------------
What: sound-slot/service-* module aliases and related clutters in
Who: Rafael J. Wysocki <rjw@sisk.pl>
----------------------------
+
+What: PCI DMA unmap state API
+When: August 2012
+Why: PCI DMA unmap state API (include/linux/pci-dma.h) was replaced
+ with DMA unmap state API (DMA unmap state API can be used for
+ any bus).
+Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+----------------------------
+
+What: DMA_xxBIT_MASK macros
+When: Jun 2011
+Why: DMA_xxBIT_MASK macros were replaced with DMA_BIT_MASK() macros.
+Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+----------------------------
+
void (*destroy_inode)(struct inode *);
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, int);
- void (*drop_inode) (struct inode *);
- void (*delete_inode) (struct inode *);
+ int (*drop_inode) (struct inode *);
+ void (*evict_inode) (struct inode *);
void (*put_super) (struct super_block *);
void (*write_super) (struct super_block *);
int (*sync_fs)(struct super_block *sb, int wait);
int (*unfreeze_fs) (struct super_block *);
int (*statfs) (struct dentry *, struct kstatfs *);
int (*remount_fs) (struct super_block *, int *, char *);
- void (*clear_inode) (struct inode *);
void (*umount_begin) (struct super_block *);
int (*show_options)(struct seq_file *, struct vfsmount *);
ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
locking rules:
- All may block.
+ All may block [not true, see below]
None have BKL
s_umount
alloc_inode:
dirty_inode: (must not sleep)
write_inode:
drop_inode: !!!inode_lock!!!
-delete_inode:
+evict_inode:
put_super: write
write_super: read
sync_fs: read
freeze_fs: read
unfreeze_fs: read
-statfs: no
-remount_fs: maybe (see below)
-clear_inode:
+statfs: maybe(read) (see below)
+remount_fs: write
umount_begin: no
show_options: no (namespace_sem)
quota_read: no (see below)
quota_write: no (see below)
-->remount_fs() will have the s_umount exclusive lock if it's already mounted.
-When called from get_sb_single, it does NOT have the s_umount lock.
+->statfs() has s_umount (shared) when called by ustat(2) (native or
+compat), but that's an accident of bad API; s_umount is used to pin
+the superblock down when we only have dev_t given us by userland to
+identify the superblock. Everything else (statfs(), fstatfs(), etc.)
+doesn't hold it when calling ->statfs() - superblock is pinned down
+by resolving the pathname passed to syscall.
->quota_read() and ->quota_write() functions are both guaranteed to
be the only ones operating on the quota file by the quota code (via
dqio_sem) (unless an admin really wants to screw up something and
ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
int (*readdir) (struct file *, void *, filldir_t);
unsigned int (*poll) (struct file *, struct poll_table_struct *);
- int (*ioctl) (struct inode *, struct file *, unsigned int,
- unsigned long);
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
aio_write: no
readdir: no
poll: no
-ioctl: yes (see below)
-unlocked_ioctl: no (see below)
+unlocked_ioctl: no
compat_ioctl: no
mmap: no
open: no
anything that resembles union-mount we won't have a struct file for all
components. And there are other reasons why the current interface is a mess...
-->ioctl() on regular files is superceded by the ->unlocked_ioctl() that
-doesn't take the BKL.
-
->read on directories probably must go away - we should just enforce -EISDIR
in sys_read() and friends.
deliberate; as soon as struct block_device * is propagated in a reasonable
way by that code fixing will become trivial; until then nothing can be
done.
+
+[mandatory]
+
+ block truncatation on error exit from ->write_begin, and ->direct_IO
+moved from generic methods (block_write_begin, cont_write_begin,
+nobh_write_begin, blockdev_direct_IO*) to callers. Take a look at
+ext2_write_failed and callers for an example.
+
+[mandatory]
+
+ ->truncate is going away. The whole truncate sequence needs to be
+implemented in ->setattr, which is now mandatory for filesystems
+implementing on-disk size changes. Start with a copy of the old inode_setattr
+and vmtruncate, and the reorder the vmtruncate + foofs_vmtruncate sequence to
+be in order of zeroing blocks using block_truncate_page or similar helpers,
+size update and on finally on-disk truncation which should not fail.
+inode_change_ok now includes the size checks for ATTR_SIZE and must be called
+in the beginning of ->setattr unconditionally.
+
+[mandatory]
+
+ ->clear_inode() and ->delete_inode() are gone; ->evict_inode() should
+be used instead. It gets called whenever the inode is evicted, whether it has
+remaining links or not. Caller does *not* evict the pagecache or inode-associated
+metadata buffers; getting rid of those is responsibility of method, as it had
+been for ->delete_inode().
+ ->drop_inode() returns int now; it's called on final iput() with inode_lock
+held and it returns true if filesystems wants the inode to be dropped. As before,
+generic_drop_inode() is still the default and it's been updated appropriately.
+generic_delete_inode() is also alive and it consists simply of return 1. Note that
+all actual eviction work is done by caller after ->drop_inode() returns.
+ clear_inode() is gone; use end_writeback() instead. As before, it must
+be called exactly once on each call of ->evict_inode() (as it used to be for
+each call of ->delete_inode()). Unlike before, if you are using inode-associated
+metadata buffers (i.e. mark_buffer_dirty_inode()), it's your responsibility to
+call invalidate_inode_buffers() before end_writeback().
+ No async writeback (and thus no calls of ->write_inode()) will happen
+after end_writeback() returns, so actions that should not overlap with ->write_inode()
+(e.g. freeing on-disk inode if i_nlink is 0) ought to be done after that call.
+
+ NOTE: checking i_nlink in the beginning of ->write_inode() and bailing out
+if it's zero is not *and* *never* *had* *been* enough. Final unlink() and iput()
+may happen while the inode is in the middle of ->write_inode(); e.g. if you blindly
+free the on-disk inode, you may end up doing that while ->write_inode() is writing
+to it.
=======================
Squashfs is a compressed read-only filesystem for Linux.
-It uses zlib compression to compress files, inodes and directories.
+It uses zlib/lzo compression to compress files, inodes and directories.
Inodes in the system are very small and all blocks are packed to minimise
data overhead. Block sizes greater than 4K are supported up to a maximum
of 1Mbytes (default block size 128K).
ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
int (*readdir) (struct file *, void *, filldir_t);
unsigned int (*poll) (struct file *, struct poll_table_struct *);
- int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
activity on this file and (optionally) go to sleep until there
is activity. Called by the select(2) and poll(2) system calls
- ioctl: called by the ioctl(2) system call
-
- unlocked_ioctl: called by the ioctl(2) system call. Filesystems that do not
- require the BKL should use this method instead of the ioctl() above.
+ unlocked_ioctl: called by the ioctl(2) system call.
compat_ioctl: called by the ioctl(2) system call when 32 bit system calls
are used on 64 bit kernels.
Spinlock-Safe GPIO access
-------------------------
Most GPIO controllers can be accessed with memory read/write instructions.
-That doesn't need to sleep, and can safely be done from inside IRQ handlers.
-(That includes hardirq contexts on RT kernels.)
+Those don't need to sleep, and can safely be done from inside hard
+(nonthreaded) IRQ handlers and similar contexts.
-Use these calls to access such GPIOs:
+Use the following calls to access such GPIOs,
+for which gpio_cansleep() will always return false (see below):
/* GPIO INPUT: return zero or nonzero */
int gpio_get_value(unsigned gpio);
/* GPIO OUTPUT, might sleep */
void gpio_set_value_cansleep(unsigned gpio, int value);
-Other than the fact that these calls might sleep, and will not be ignored
-for GPIOs that can't be accessed from IRQ handlers, these calls act the
-same as the spinlock-safe calls.
+
+Accessing such GPIOs requires a context which may sleep, for example
+a threaded IRQ handler, and those accessors must be used instead of
+spinlock-safe accessors without the cansleep() name suffix.
+
+Other than the fact that these accessors might sleep, and will work
+on GPIOs that can't be accessed from hardIRQ handlers, these calls act
+the same as the spinlock-safe calls.
+
+ ** IN ADDITION ** calls to setup and configure such GPIOs must be made
+from contexts which may sleep, since they may need to access the GPIO
+controller chip too: (These setup calls are usually made from board
+setup or driver probe/teardown code, so this is an easy constraint.)
+
+ gpio_direction_input()
+ gpio_direction_output()
+ gpio_request()
+
+## gpio_request_one()
+## gpio_request_array()
+## gpio_free_array()
+
+ gpio_free()
+ gpio_set_debounce()
+
Claiming and Releasing GPIOs
--- /dev/null
+Kernel driver emc2103
+======================
+
+Supported chips:
+ * SMSC EMC2103
+ Addresses scanned: I2C 0x2e
+ Prefix: 'emc2103'
+ Datasheet: Not public
+
+Authors:
+ Steve Glendinning <steve.glendinning@smsc.com>
+
+Description
+-----------
+
+The Standard Microsystems Corporation (SMSC) EMC2103 chips
+contain up to 4 temperature sensors and a single fan controller.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 1, the lowest
+representable value is 480 RPM.
+
+This driver supports RPM based control, to use this a fan target
+should be written to fan1_target and pwm1_enable should be set to 3.
+
+The 2103-2 and 2103-4 variants have a third temperature sensor, which can
+be connected to two anti-parallel diodes. These values can be read
+as temp3 and temp4. If only one diode is attached to this channel, temp4
+will show as "fault". The module parameter "apd=0" can be used to suppress
+this 4th channel when anti-parallel diodes are not fitted.
in7_min_alarm 3v output undervoltage alarm
in8_min_alarm Vee (-12v) output undervoltage alarm
-in9_input GPIO voltage data
+in9_input GPIO voltage data (see note 1)
+in10_input GPIO voltage data (see note 1)
+in11_input GPIO voltage data (see note 1)
power1_input 12v power usage (mW)
power2_input 5v power usage (mW)
power3_input 3v power usage (mW)
power4_input Vee (-12v) power usage (mW)
+
+
+Note 1
+------
+
+If you have NOT configured the driver to sample all GPIO pins as analog
+voltages, then the in10_input and in11_input sysfs attributes will not be
+created. The driver will sample the GPIO pin that is currently connected to the
+ADC as an analog voltage, and report the value in in9_input.
+
+If you have configured the driver to sample all GPIO pins as analog voltages,
+then they will be sampled in round-robin fashion. If userspace reads too
+slowly, -EAGAIN will be returned when you read the sysfs attribute containing
+the sensor reading.
+
+The LTC4245 chip can be configured to sample all GPIO pins with two methods:
+1) platform data -- see include/linux/i2c/ltc4245.h
+2) OF device tree -- add the "ltc4245,use-extra-gpios" property to each chip
+
+The default mode of operation is to sample a single GPIO pin.
The National Semiconductor Super I/O chip includes complete hardware
monitoring capabilities. It can monitor up to 18 voltages, 8 fans and
-6 temperature sensors. Only the fans are supported at the moment.
+6 temperature sensors. Only the fans and temperatures are supported at
+the moment, voltages aren't.
-This chip also has fan controlling features, which are not yet supported
-by this driver either.
+This chip also has fan controlling features (up to 4 PWM outputs),
+which are partly supported by this driver.
The driver assumes that no more than one chip is present, which seems
reasonable.
An alarm is triggered if the rotation speed drops below a programmable
limit. Another alarm is triggered if the speed is too low to be measured
(including stalled or missing fan).
+
+
+Fan Speed Control
+-----------------
+
+Fan speed can be controlled by PWM outputs. There are 4 possible modes:
+always off, always on, manual and automatic. The latter isn't supported
+by the driver: you can only return to that mode if it was the original
+setting, and the configuration interface is missing.
+
+
+Temperature Monitoring
+----------------------
+
+The PC87427 relies on external sensors (following the SensorPath
+standard), so the resolution and range depend on the type of sensor
+connected. The integer part can be 8-bit or 9-bit, and can be signed or
+not. I couldn't find a way to figure out the external sensor data
+temperature format, so user-space adjustment (typically by a factor 2)
+may be required.
Unit: millivolt
RW
+in[0-*]_lcrit Voltage critical min value.
+ Unit: millivolt
+ RW
+ If voltage drops to or below this limit, the system may
+ take drastic action such as power down or reset. At the very
+ least, it should report a fault.
+
in[0-*]_max Voltage max value.
Unit: millivolt
RW
+in[0-*]_crit Voltage critical max value.
+ Unit: millivolt
+ RW
+ If voltage reaches or exceeds this limit, the system may
+ take drastic action such as power down or reset. At the very
+ least, it should report a fault.
+
in[0-*]_input Voltage input value.
Unit: millivolt
RO
Unit: millidegree Celsius
RO
-temp[1-*]_crit Temperature critical value, typically greater than
+temp[1-*]_crit Temperature critical max value, typically greater than
corresponding temp_max values.
Unit: millidegree Celsius
RW
from the critical value.
RW
+temp[1-*]_lcrit Temperature critical min value, typically lower than
+ corresponding temp_min values.
+ Unit: millidegree Celsius
+ RW
+
temp[1-*]_offset
Temperature offset which is added to the temperature reading
by the chip.
* Currents *
************
-Note that no known chip provides current measurements as of writing,
-so this part is theoretical, so to say.
-
curr[1-*]_max Current max value
Unit: milliampere
RW
implementation.
in[0-*]_alarm
+curr[1-*]_alarm
fan[1-*]_alarm
temp[1-*]_alarm
Channel alarm
in[0-*]_min_alarm
in[0-*]_max_alarm
+curr[1-*]_min_alarm
+curr[1-*]_max_alarm
fan[1-*]_min_alarm
fan[1-*]_max_alarm
temp[1-*]_min_alarm
supports it. When this boolean has value 1, the measurement for that
channel should not be trusted.
-in[0-*]_fault
fan[1-*]_fault
temp[1-*]_fault
Input fault condition
RW
in[0-*]_beep
+curr[1-*]_beep
fan[1-*]_beep
temp[1-*]_beep
Channel beep
Prefix: 'w83667hg'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: not available
+ * Winbond W83667HG-B
+ Prefix: 'w83667hg'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Available from Nuvoton upon request
Authors:
Jean Delvare <khali@linux-fr.org>
-----------
This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG, W83627DHG-P and W83667HG super I/O chips. We will refer to them
-collectively as Winbond chips.
+W83627DHG, W83627DHG-P, W83667HG and W83667HG-B super I/O chips.
+We will refer to them collectively as Winbond chips.
The chips implement three temperature sensors, five fan rotation
speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
temp1 -> pwm1
temp2 -> pwm2
temp3 -> pwm3
-prog -> pwm4 (not on 667HG; the programmable setting is not supported by
- the driver)
+prog -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not
+ supported by the driver)
/sys files
----------
name - this is a standard hwmon device entry. For the W83627EHF and W83627EHG,
- it is set to "w83627ehf" and for the W83627DHG it is set to "w83627dhg"
+ it is set to "w83627ehf", for the W83627DHG it is set to "w83627dhg",
+ and for the W83667HG it is set to "w83667hg".
pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
0 (stop) to 255 (full)
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
- normal_i2c);
+ normal_i2c, NULL);
i2c_put_adapter(i2c_adap);
(...)
}
--- 7.1 header-y
--- 7.2 objhdr-y
--- 7.3 destination-y
- --- 7.4 unifdef-y (deprecated)
=== 8 Kbuild Variables
=== 9 Makefile language
will be located in the directory "include/linux" when exported.
- --- 7.4 unifdef-y (deprecated)
-
- unifdef-y is deprecated. A direct replacement is header-y.
-
-
=== 8 Kbuild Variables
The top Makefile exports the following variables:
RAM RAM disk support is enabled.
S390 S390 architecture is enabled.
SCSI Appropriate SCSI support is enabled.
- A lot of drivers has their options described inside of
- Documentation/scsi/.
+ A lot of drivers have their options described inside
+ the Documentation/scsi/ sub-directory.
SECURITY Different security models are enabled.
SELINUX SELinux support is enabled.
APPARMOR AppArmor support is enabled.
add_efi_memmap [EFI; X86] Include EFI memory map in
kernel's map of available physical RAM.
- advansys= [HW,SCSI]
- See header of drivers/scsi/advansys.c.
-
agp= [AGP]
{ off | try_unsupported }
off: disable AGP support
try_unsupported: try to drive unsupported chipsets
(may crash computer or cause data corruption)
- aha152x= [HW,SCSI]
- See Documentation/scsi/aha152x.txt.
-
- aha1542= [HW,SCSI]
- Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
-
- aic7xxx= [HW,SCSI]
- See Documentation/scsi/aic7xxx.txt.
-
- aic79xx= [HW,SCSI]
- See Documentation/scsi/aic79xx.txt.
-
ALSA [HW,ALSA]
See Documentation/sound/alsa/alsa-parameters.txt
atarimouse= [HW,MOUSE] Atari Mouse
- atascsi= [HW,SCSI] Atari SCSI
-
atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess,
EzKey and similar keyboards
bttv.pll= See Documentation/video4linux/bttv/Insmod-options
bttv.tuner= and Documentation/video4linux/bttv/CARDLIST
- BusLogic= [HW,SCSI]
- See drivers/scsi/BusLogic.c, comment before function
- BusLogic_ParseDriverOptions().
-
c101= [NET] Moxa C101 synchronous serial card
cachesize= [BUGS=X86-32] Override level 2 CPU cache size detection.
dscc4.setup= [NET]
- dtc3181e= [HW,SCSI]
-
dynamic_printk Enables pr_debug()/dev_dbg() calls if
CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
These can also be switched on/off via
earlycon= [KNL] Output early console device and options.
uart[8250],io,<addr>[,options]
uart[8250],mmio,<addr>[,options]
+ uart[8250],mmio32,<addr>[,options]
Start an early, polled-mode console on the 8250/16550
UART at the specified I/O port or MMIO address.
+ MMIO inter-register address stride is either 8bit (mmio)
+ or 32bit (mmio32).
The options are the same as for ttyS, above.
earlyprintk= [X86,SH,BLACKFIN]
This is desgined to be used in conjunction with
the boot argument: earlyprintk=vga
- eata= [HW,SCSI]
-
edd= [EDD]
Format: {"off" | "on" | "skip[mbr]"}
Format: <interval>,<probability>,<space>,<times>
See also /Documentation/fault-injection/.
- fd_mcs= [HW,SCSI]
- See header of drivers/scsi/fd_mcs.c.
-
- fdomain= [HW,SCSI]
- See header of drivers/scsi/fdomain.c.
-
floppy= [HW]
See Documentation/blockdev/floppy.txt.
When zero, profiling data is discarded and associated
debugfs files are removed at module unload time.
- gdth= [HW,SCSI]
- See header of drivers/scsi/gdth.c.
-
gpt [EFI] Forces disk with valid GPT signature but
invalid Protective MBR to be treated as GPT.
- gvp11= [HW,SCSI]
-
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
for 64bit NUMA, off otherwise.
controller
i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
controllers
- i8042.panicblink=
- [HW] Frequency with which keyboard LEDs should blink
- when kernel panics (default is 0.5 sec)
i8042.reset [HW] Reset the controller during init and cleanup
i8042.unlock [HW] Unlock (ignore) the keylock
i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN
capability is set.
- ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter
- See Documentation/mca.txt.
-
icn= [HW,ISDN]
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
programs exec'd, files mmap'd for exec, and all files
opened for read by uid=0.
- in2000= [HW,SCSI]
- See header of drivers/scsi/in2000.c.
-
init= [KNL]
Format: <full_path>
Run specified binary instead of /sbin/init as init
result in a hardware IOTLB flush operation as opposed
to batching them for performance.
+ intremap= [X86-64, Intel-IOMMU]
+ Format: { on (default) | off | nosid }
+ on enable Interrupt Remapping (default)
+ off disable Interrupt Remapping
+ nosid disable Source ID checking
+
inttest= [IA64]
iomem= Disable strict checking of access to MMIO memory
See comment before ip2_setup() in
drivers/char/ip2/ip2base.c.
- ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
- See header of drivers/scsi/ips.c.
-
irqfixup [HW]
When an interrupt is not handled search all handlers
for it. Intended to get systems with badly broken
ltpc= [NET]
Format: <io>,<irq>,<dma>
- mac5380= [HW,SCSI] Format:
- <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
-
machvec= [IA64] Force the use of a particular machine-vector
(machvec) in a generic kernel.
Example: machvec=hpzx1_swiotlb
be mounted
Format: <1-256>
- max_luns= [SCSI] Maximum number of LUNs to probe.
- Should be between 1 and 2^32-1.
-
- max_report_luns=
- [SCSI] Maximum number of LUNs received.
- Should be between 1 and 16384.
-
mcatest= [IA-64]
mce [X86-32] Machine Check Exception
n2= [NET] SDL Inc. RISCom/N2 synchronous serial card
- NCR_D700= [HW,SCSI]
- See header of drivers/scsi/NCR_D700.c.
-
- ncr5380= [HW,SCSI]
-
- ncr53c400= [HW,SCSI]
-
- ncr53c400a= [HW,SCSI]
-
- ncr53c406a= [HW,SCSI]
-
- ncr53c8xx= [HW,SCSI]
-
netdev= [NET] Network devices parameters
Format: <irq>,<io>,<mem_start>,<mem_end>,<name>
Note that mem_start is often overloaded to mean
nointremap [X86-64, Intel-IOMMU] Do not enable interrupt
remapping.
+ [Deprecated - use intremap=off]
nointroute [IA-64]
OSS [HW,OSS]
See Documentation/sound/oss/oss-parameters.txt
- osst= [HW,SCSI] SCSI Tape Driver
- Format: <buffer_size>,<write_threshold>
- See also Documentation/scsi/st.txt.
-
panic= [KNL] Kernel behaviour on panic
Format: <timeout>
Currently this function knows 686a and 8231 chips.
Format: [spp|ps2|epp|ecp|ecpepp]
- pas16= [HW,SCSI]
- See header of drivers/scsi/pas16.c.
-
pause_on_oops=
Halt all CPUs after the first oops has been printed for
the specified number of seconds. This is to be used if
sched_debug [KNL] Enables verbose scheduler debug messages.
- scsi_debug_*= [SCSI]
- See drivers/scsi/scsi_debug.c.
-
- scsi_default_dev_flags=
- [SCSI] SCSI default device flags
- Format: <integer>
-
- scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
- Format: <vendor>:<model>:<flags>
- (flags are integer value)
-
- scsi_logging_level= [SCSI] a bit mask of logging levels
- See drivers/scsi/scsi_logging.h for bits. Also
- settable via sysctl at dev.scsi.logging_level
- (/proc/sys/dev/scsi/logging_level).
- There is also a nice 'scsi_logging_level' script in the
- S390-tools package, available for download at
- http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
-
- scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
- discovered. async scans them in kernel threads,
- allowing boot to proceed. none ignores them, expecting
- user space to do the scan.
-
security= [SECURITY] Choose a security module to enable at boot.
If this boot parameter is not specified, only the first
security module asking for security registration will be
The parameter means the number of CPUs to show,
for example 1 means boot CPU only.
- sim710= [SCSI,HW]
- See header of drivers/scsi/sim710.c.
-
simeth= [IA-64]
simscsi=
spia_pedr=
spia_peddr=
- st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
- See Documentation/scsi/st.txt.
-
stacktrace [FTRACE]
Enabled the stack tracer on boot up.
switches= [HW,M68k]
- sym53c416= [HW,SCSI]
- See header of drivers/scsi/sym53c416.c.
-
sysrq_always_enabled
[KNL]
Ignore sysrq setting - this boot parameter will
neutralize any effect of /proc/sys/kernel/sysrq.
Useful for debugging.
- t128= [HW,SCSI]
- See header of drivers/scsi/t128.c.
-
tdfx= [HW,DRM]
test_suspend= [SUSPEND]
<deci-seconds>: poll all this frequency
0: no polling (default)
- tmscsim= [HW,SCSI]
- See comment before function dc390_setup() in
- drivers/scsi/tmscsim.c.
-
topology= [S390]
Format: {off | on}
Specify if the kernel should make use of the cpu
<port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
See also Documentation/input/joystick-parport.txt
- u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter
- See header of drivers/scsi/u14-34f.c.
-
uhash_entries= [KNL,NET]
Set number of hash buckets for UDP/UDP-Lite connections
overridden by individual drivers. 0 will hide
cursors, 1 will display them.
- wd33c93= [HW,SCSI]
- See header of drivers/scsi/wd33c93.c.
-
- wd7000= [HW,SCSI]
- See header of drivers/scsi/wd7000.c.
-
watchdog timers [HW,WDT] For information on watchdog timers,
see Documentation/watchdog/watchdog-parameters.txt
or other driver-specific files in the
backlight brightness control interface if it detects that the standard
ACPI interface is available in the ThinkPad.
+If you want to use the thinkpad-acpi backlight brightness control
+instead of the generic ACPI video backlight brightness control for some
+reason, you should use the acpi_backlight=vendor kernel parameter.
+
The brightness_enable module parameter can be used to control whether
the LCD brightness control feature will be enabled when available.
brightness_enable=0 forces it to be disabled. brightness_enable=1
--- /dev/null
+00-INDEX
+ - this file
+mmc-dev-attrs.txt
+ - info on SD and MMC device attributes
--- /dev/null
+SD and MMC Device Attributes
+============================
+
+All attributes are read-only.
+
+ cid Card Identifaction Register
+ csd Card Specific Data Register
+ scr SD Card Configuration Register (SD only)
+ date Manufacturing Date (from CID Register)
+ fwrev Firmware/Product Revision (from CID Register) (SD and MMCv1 only)
+ hwrev Hardware/Product Revision (from CID Register) (SD and MMCv1 only)
+ manfid Manufacturer ID (from CID Register)
+ name Product Name (from CID Register)
+ oemid OEM/Application ID (from CID Register)
+ serial Product Serial Number (from CID Register)
+ erase_size Erase group size
+ preferred_erase_size Preferred erase size
+
+Note on Erase Size and Preferred Erase Size:
+
+ "erase_size" is the minimum size, in bytes, of an erase
+ operation. For MMC, "erase_size" is the erase group size
+ reported by the card. Note that "erase_size" does not apply
+ to trim or secure trim operations where the minimum size is
+ always one 512 byte sector. For SD, "erase_size" is 512
+ if the card is block-addressed, 0 otherwise.
+
+ SD/MMC cards can erase an arbitrarily large area up to and
+ including the whole card. When erasing a large area it may
+ be desirable to do it in smaller chunks for three reasons:
+ 1. A single erase command will make all other I/O on
+ the card wait. This is not a problem if the whole card
+ is being erased, but erasing one partition will make
+ I/O for another partition on the same card wait for the
+ duration of the erase - which could be a several
+ minutes.
+ 2. To be able to inform the user of erase progress.
+ 3. The erase timeout becomes too large to be very
+ useful. Because the erase timeout contains a margin
+ which is multiplied by the size of the erase area,
+ the value can end up being several minutes for large
+ areas.
+
+ "erase_size" is not the most efficient unit to erase
+ (especially for SD where it is just one sector),
+ hence "preferred_erase_size" provides a good chunk
+ size for erasing large areas.
+
+ For MMC, "preferred_erase_size" is the high-capacity
+ erase size if a card specifies one, otherwise it is
+ based on the capacity of the card.
+
+ For SD, "preferred_erase_size" is the allocation unit
+ size specified by the card.
+
+ "preferred_erase_size" is in bytes.
+++ /dev/null
- The Wavelan drivers saga
- ------------------------
-
- By Jean Tourrilhes <jt@hpl.hp.com>
-
- The Wavelan is a Radio network adapter designed by
-Lucent. Under this generic name is hidden quite a variety of hardware,
-and many Linux driver to support it.
- The get the full story on Wireless LANs, please consult :
- http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
-
-"wavelan" driver (old ISA Wavelan)
-----------------
- o Config : Network device -> Wireless LAN -> AT&T WaveLAN
- o Location : .../drivers/net/wireless/wavelan*
- o in-line doc : .../drivers/net/wireless/wavelan.p.h
- o on-line doc :
- http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
-
- This is the driver for the ISA version of the first generation
-of the Wavelan, now discontinued. The device is 2 Mb/s, composed of a
-Intel 82586 controller and a Lucent Modem, and is NOT 802.11 compliant.
- The driver has been tested with the following hardware :
- o Wavelan ISA 915 MHz (full length ISA card)
- o Wavelan ISA 915 MHz 2.0 (half length ISA card)
- o Wavelan ISA 2.4 GHz (full length ISA card, fixed frequency)
- o Wavelan ISA 2.4 GHz 2.0 (half length ISA card, frequency selectable)
- o Above cards with the optional DES encryption feature
-
-"wavelan_cs" driver (old Pcmcia Wavelan)
--------------------
- o Config : Network device -> PCMCIA network ->
- Pcmcia Wireless LAN -> AT&T/Lucent WaveLAN
- o Location : .../drivers/net/pcmcia/wavelan*
- o in-line doc : .../drivers/net/pcmcia/wavelan_cs.h
- o on-line doc :
- http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
-
- This is the driver for the PCMCIA version of the first
-generation of the Wavelan, now discontinued. The device is 2 Mb/s,
-composed of a Intel 82593 controller (totally different from the 82586)
-and a Lucent Modem, and NOT 802.11 compatible.
- The driver has been tested with the following hardware :
- o Wavelan Pcmcia 915 MHz 2.0 (Pcmcia card + separate
- modem/antenna block)
- o Wavelan Pcmcia 2.4 GHz 2.0 (Pcmcia card + separate
- modem/antenna block)
-
-"wvlan_cs" driver (Wavelan IEEE, GPL)
------------------
- o Config : Not yet in kernel
- o Location : Pcmcia package 3.1.10+
- o on-line doc :
- http://web.archive.org/web/*/http://www.fasta.fh-dortmund.de/users/andy/wvlan/
-
- This is the driver for the current generation of Wavelan IEEE,
-which is 802.11 compatible. Depending on version, it is 2 Mb/s or 11
-Mb/s, with or without encryption, all implemented in Lucent specific
-DSP (the Hermes).
- This is a GPL full source PCMCIA driver (ISA is just a Pcmcia
-card with ISA-Pcmcia bridge).
-
-"wavelan2_cs" driver (Wavelan IEEE, binary)
---------------------
- o Config : Not yet in kernel
- o Location : ftp://sourceforge.org/pcmcia/contrib/
-
- This driver support exactly the same hardware as the previous
-driver, the main difference is that it is based on a binary library
-and supported by Lucent.
-
- I hope it clears the confusion ;-)
-
- Jean
The pcpumask describes which processors will be used to execute work
submitted to this instance in parallel. The cbcpumask defines which
-processors are allowed to use as the serialization callback processor.
+processors are allowed to be used as the serialization callback processor.
The workqueue wq is where the work will actually be done; it should be
a multithreaded queue, naturally.
Note: Padata maintains two kinds of cpumasks internally. The user supplied
cpumasks, submitted by padata_alloc/padata_alloc_possible and the 'usable'
-cpumasks. The usable cpumasks are always the subset of active cpus in the
-user supplied cpumasks, these are the cpumasks padata actually use. So
-it is legal to supply a cpumask to padata that contains offline cpus.
-Once a offline cpu in the user supplied cpumask comes online, padata
+cpumasks. The usable cpumasks are always a subset of active CPUs in the
+user supplied cpumasks; these are the cpumasks padata actually uses. So
+it is legal to supply a cpumask to padata that contains offline CPUs.
+Once an offline CPU in the user supplied cpumask comes online, padata
is going to use it.
There are functions for enabling and disabling the instance:
These functions are setting or clearing the "PADATA_INIT" flag;
if that flag is not set, other functions will refuse to work.
padata_start returns zero on success (flag set) or -EINVAL if the
-padata cpumask contains no active cpu (flag not set).
+padata cpumask contains no active CPU (flag not set).
padata_stop clears the flag and blocks until the padata instance
is unused.
It's possible to change both cpumasks of a padata instance with
padata_set_cpumasks by specifying the cpumasks for parallel execution (pcpumask)
-and for the serial callback function (cbcpumask). padata_set_cpumask is to
+and for the serial callback function (cbcpumask). padata_set_cpumask is used to
change just one of the cpumasks. Here cpumask_type is one of PADATA_CPU_SERIAL,
PADATA_CPU_PARALLEL and cpumask specifies the new cpumask to use.
-To simply add or remove one cpu from a certain cpumask the functions
-padata_add_cpu/padata_remove_cpu are used. cpu specifies the cpu to add or
+To simply add or remove one CPU from a certain cpumask the functions
+padata_add_cpu/padata_remove_cpu are used. cpu specifies the CPU to add or
remove and mask is one of PADATA_CPU_SERIAL, PADATA_CPU_PARALLEL.
If a user is interested in padata cpumask changes, he can register to
struct notifier_block *nblock);
The padata cpumask change notifier notifies about changes of the usable
-cpumasks, i.e. the subset of active cpus in the user supplied cpumask.
+cpumasks, i.e. the subset of active CPUs in the user supplied cpumask.
Padata calls the notifier chain with:
Here cpumask_change_notifier is registered notifier, notification_mask
is one of PADATA_CPU_SERIAL, PADATA_CPU_PARALLEL and cpumask is a pointer
-to a struct padata_cpumask that contains the new cpumask informations.
+to a struct padata_cpumask that contains the new cpumask information.
Actually submitting work to the padata instance requires the creation of a
padata_priv structure:
};
This structure will almost certainly be embedded within some larger
-structure specific to the work to be done. Most its fields are private to
+structure specific to the work to be done. Most of its fields are private to
padata, but the structure should be zeroed at initialisation time, and the
parallel() and serial() functions should be provided. Those functions will
be called in the process of getting the work done as we will see
f) MDIO on GPIOs
g) SPI busses
- VII - Marvell Discovery mv64[345]6x System Controller chips
- 1) The /system-controller node
- 2) Child nodes of /system-controller
- a) Marvell Discovery MDIO bus
- b) Marvell Discovery ethernet controller
- c) Marvell Discovery PHY nodes
- d) Marvell Discovery SDMA nodes
- e) Marvell Discovery BRG nodes
- f) Marvell Discovery CUNIT nodes
- g) Marvell Discovery MPSCROUTING nodes
- h) Marvell Discovery MPSCINTR nodes
- i) Marvell Discovery MPSC nodes
- j) Marvell Discovery Watch Dog Timer nodes
- k) Marvell Discovery I2C nodes
- l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
- m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
- n) Marvell Discovery GPP (General Purpose Pins) nodes
- o) Marvell Discovery PCI host bridge node
- p) Marvell Discovery CPU Error nodes
- q) Marvell Discovery SRAM Controller nodes
- r) Marvell Discovery PCI Error Handler nodes
- s) Marvell Discovery Memory Controller nodes
-
- VIII - Specifying interrupt information for devices
+ VII - Specifying interrupt information for devices
1) interrupts property
2) interrupt-parent property
3) OpenPIC Interrupt Controllers
4) ISA Interrupt Controllers
- IX - Specifying GPIO information for devices
- 1) gpios property
- 2) gpio-controller nodes
-
- X - Specifying device power management information (sleep property)
+ VIII - Specifying device power management information (sleep property)
Appendix A - Sample SOC node for MPC8540
reports inverted write-protect state;
- sdhci,1-bit-only : (optional) specifies that a controller can
only handle 1-bit data transfers.
+ - sdhci,auto-cmd12: (optional) specifies that a controller can
+ only handle auto CMD12.
Example:
--- /dev/null
+ SCSI Kernel Parameters
+ ~~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+ advansys= [HW,SCSI]
+ See header of drivers/scsi/advansys.c.
+
+ aha152x= [HW,SCSI]
+ See Documentation/scsi/aha152x.txt.
+
+ aha1542= [HW,SCSI]
+ Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
+
+ aic7xxx= [HW,SCSI]
+ See Documentation/scsi/aic7xxx.txt.
+
+ aic79xx= [HW,SCSI]
+ See Documentation/scsi/aic79xx.txt.
+
+ atascsi= [HW,SCSI] Atari SCSI
+
+ BusLogic= [HW,SCSI]
+ See drivers/scsi/BusLogic.c, comment before function
+ BusLogic_ParseDriverOptions().
+
+ dtc3181e= [HW,SCSI]
+
+ eata= [HW,SCSI]
+
+ fd_mcs= [HW,SCSI]
+ See header of drivers/scsi/fd_mcs.c.
+
+ fdomain= [HW,SCSI]
+ See header of drivers/scsi/fdomain.c.
+
+ gdth= [HW,SCSI]
+ See header of drivers/scsi/gdth.c.
+
+ gvp11= [HW,SCSI]
+
+ ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter
+ See Documentation/mca.txt.
+
+ in2000= [HW,SCSI]
+ See header of drivers/scsi/in2000.c.
+
+ ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
+ See header of drivers/scsi/ips.c.
+
+ mac5380= [HW,SCSI] Format:
+ <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
+
+ max_luns= [SCSI] Maximum number of LUNs to probe.
+ Should be between 1 and 2^32-1.
+
+ max_report_luns=
+ [SCSI] Maximum number of LUNs received.
+ Should be between 1 and 16384.
+
+ NCR_D700= [HW,SCSI]
+ See header of drivers/scsi/NCR_D700.c.
+
+ ncr5380= [HW,SCSI]
+
+ ncr53c400= [HW,SCSI]
+
+ ncr53c400a= [HW,SCSI]
+
+ ncr53c406a= [HW,SCSI]
+
+ ncr53c8xx= [HW,SCSI]
+
+ nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
+
+ osst= [HW,SCSI] SCSI Tape Driver
+ Format: <buffer_size>,<write_threshold>
+ See also Documentation/scsi/st.txt.
+
+ pas16= [HW,SCSI]
+ See header of drivers/scsi/pas16.c.
+
+ scsi_debug_*= [SCSI]
+ See drivers/scsi/scsi_debug.c.
+
+ scsi_default_dev_flags=
+ [SCSI] SCSI default device flags
+ Format: <integer>
+
+ scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
+ Format: <vendor>:<model>:<flags>
+ (flags are integer value)
+
+ scsi_logging_level= [SCSI] a bit mask of logging levels
+ See drivers/scsi/scsi_logging.h for bits. Also
+ settable via sysctl at dev.scsi.logging_level
+ (/proc/sys/dev/scsi/logging_level).
+ There is also a nice 'scsi_logging_level' script in the
+ S390-tools package, available for download at
+ http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
+
+ scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
+ discovered. async scans them in kernel threads,
+ allowing boot to proceed. none ignores them, expecting
+ user space to do the scan.
+
+ sim710= [SCSI,HW]
+ See header of drivers/scsi/sim710.c.
+
+ st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
+ See Documentation/scsi/st.txt.
+
+ sym53c416= [HW,SCSI]
+ See header of drivers/scsi/sym53c416.c.
+
+ t128= [HW,SCSI]
+ See header of drivers/scsi/t128.c.
+
+ tmscsim= [HW,SCSI]
+ See comment before function dc390_setup() in
+ drivers/scsi/tmscsim.c.
+
+ u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter
+ See header of drivers/scsi/u14-34f.c.
+
+ wd33c93= [HW,SCSI]
+ See header of drivers/scsi/wd33c93.c.
+
+ wd7000= [HW,SCSI]
+ See header of drivers/scsi/wd7000.c.
======
basic Basic preset
quanta Quanta FL1
- eeepc-p703 ASUS Eeepc P703 P900A
- eeepc-p901 ASUS Eeepc P901 S101
+ laptop-amic Laptops with analog-mic input
+ laptop-dmic Laptops with digital-mic input
fujitsu FSC Amilo
lifebook Fujitsu Lifebook S6420
auto auto-config reading BIOS (default)
asus-mode4 ASUS
asus-mode5 ASUS
asus-mode6 ASUS
+ asus-mode7 ASUS
+ asus-mode8 ASUS
dell Dell with ALC272
dell-zm1 Dell ZM1 with ALC272
samsung-nc10 Samsung NC10 mini notebook
=============
laptop Basic Laptop config (default)
dell-laptop Dell laptops
+ dell-vostro Dell Vostro
olpc-xo-1_5 OLPC XO 1.5
ideapad Lenovo IdeaPad U150
+ thinkpad Lenovo Thinkpad
STAC9200
========
mic-ref Reference board with power management for ports
dell-s14 Dell laptop
hp HP laptops with (inverted) mute-LED
+ hp-dv7-4000 HP dv-7 4000
auto BIOS setup (default)
STAC9872
mbp55 MacBook Pro 5,5
imac27 IMac 27 Inch
auto BIOS setup (default)
+
+VIA VT17xx/VT18xx/VT20xx
+========================
+ auto BIOS setup (default)
- "Low Speed" 1.5 Mbit/sec
USB 1.1 only addressed full speed and low speed. High speed devices
-can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
+can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
USB 1.1 devices may also be used on USB 2.0 systems. When plugged
into an EHCI controller, they are given to a USB 1.1 "companion"
--- /dev/null
+ -*- org -*-
+
+* Overview
+
+The Multifunction Composite Gadget (or g_multi) is a composite gadget
+that makes extensive use of the composite framework to provide
+a... multifunction gadget.
+
+In it's standard configuration it provides a single USB configuration
+with RNDIS[1] (that is Ethernet), USB CDC[2] ACM (that is serial) and
+USB Mass Storage functions.
+
+A CDC ECM (Ethernet) function may be turned on via a Kconfig option
+and RNDIS can be turned off. If they are both enabled the gadget will
+have two configurations -- one with RNDIS and another with CDC ECM[3].
+
+Please not that if you use non-standard configuration (that is enable
+CDC ECM) you may need to change vendor and/or product ID.
+
+* Host drivers
+
+To make use of the gadget one needs to make it work on host side --
+without that there's no hope of achieving anything with the gadget.
+As one might expect, things one need to do very from system to system.
+
+** Linux host drivers
+
+Since the gadget uses standard composite framework and appears as such
+to Linux host it does not need any additional drivers on Linux host
+side. All the functions are handled by respective drivers developed
+for them.
+
+This is also true for two configuration set-up with RNDIS
+configuration being the first one. Linux host will use the second
+configuration with CDC ECM which should work better under Linux.
+
+** Windows host drivers
+
+For the gadget two work under Windows two conditions have to be met:
+
+*** Detecting as composite gadget
+
+First of all, Windows need to detect the gadget as an USB composite
+gadget which on its own have some conditions[4]. If they are met,
+Windows lets USB Generic Parent Driver[5] handle the device which then
+tries to much drivers for each individual interface (sort of, don't
+get into too many details).
+
+The good news is: you do not have to worry about most of the
+conditions!
+
+The only thing to worry is that the gadget has to have a single
+configuration so a dual RNDIS and CDC ECM gadget won't work unless you
+create a proper INF -- and of course, if you do submit it!
+
+*** Installing drivers for each function
+
+The other, trickier thing is making Windows install drivers for each
+individual function.
+
+For mass storage it is trivial since Windows detect it's an interface
+implementing USB Mass Storage class and selects appropriate driver.
+
+Things are harder with RDNIS and CDC ACM.
+
+**** RNDIS
+
+To make Windows select RNDIS drivers for the first function in the
+gadget, one needs to use the [[file:linux.inf]] file provided with this
+document. It "attaches" Window's RNDIS driver to the first interface
+of the gadget.
+
+Please note, that while testing we encountered some issues[6] when
+RNDIS was not the first interface. You do not need to worry abut it
+unless you are trying to develop your own gadget in which case watch
+out for this bug.
+
+**** CDC ACM
+
+Similarly, [[file:linux-cdc-acm.inf]] is provided for CDC ACM.
+
+**** Customising the gadget
+
+If you intend to hack the g_multi gadget be advised that rearranging
+functions will obviously change interface numbers for each of the
+functionality. As an effect provided INFs won't work since they have
+interface numbers hard-coded in them (it's not hard to change those
+though[7]).
+
+This also means, that after experimenting with g_multi and changing
+provided functions one should change gadget's vendor and/or product ID
+so there will be no collision with other customised gadgets or the
+original gadget.
+
+Failing to comply may cause brain damage after wondering for hours why
+things don't work as intended before realising Windows have cached
+some drivers information (changing USB port may sometimes help plus
+you might try using USBDeview[8] to remove the phantom device).
+
+**** INF testing
+
+Provided INF files have been tested on Windows XP SP3, Windows Vista
+and Windows 7, all 32-bit versions. It should work on 64-bit versions
+as well. It most likely won't work on Windows prior to Windows XP
+SP2.
+
+** Other systems
+
+At this moment, drivers for any other systems have not been tested.
+Knowing how MacOS is based on BSD and BSD is an Open Source it is
+believed that it should (read: "I have no idea whether it will") work
+out-of-the-box.
+
+For more exotic systems I have even less to say...
+
+Any testing and drivers *are* *welcome*!
+
+* Authors
+
+This document has been written by Michal Nazarewicz
+([[mailto:mina86@mina86.com]]). INF files have been hacked with
+support of Marek Szyprowski ([[mailto:m.szyprowski@samsung.com]]) and
+Xiaofan Chen ([[mailto:xiaofanc@gmail.com]]) basing on the MS RNDIS
+template[9], Microchip's CDC ACM INF file and David Brownell's
+([[mailto:dbrownell@users.sourceforge.net]]) original INF files.
+
+* Footnotes
+
+[1] Remote Network Driver Interface Specification,
+[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]].
+
+[2] Communications Device Class Abstract Control Model, spec for this
+and other USB classes can be found at
+[[http://www.usb.org/developers/devclass_docs/]].
+
+[3] CDC Ethernet Control Model.
+
+[4] [[http://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]]
+
+[5] [[http://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]]
+
+[6] To put it in some other nice words, Windows failed to respond to
+any user input.
+
+[7] You may find [[http://www.cygnal.org/ubb/Forum9/HTML/001050.html]]
+useful.
+
+[8] http://www.nirsoft.net/utils/usb_devices_view.html
+
+[9] [[http://msdn.microsoft.com/en-us/library/ff570620.aspx]]
Installing the Windows Host ACM Driver
--------------------------------------
-To use the Windows ACM driver you must have the files "gserial.inf"
-and "usbser.sys" together in a folder on the Windows machine.
-
-The "gserial.inf" file is given here.
-
--------------------- CUT HERE --------------------
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%LINUX%
-DriverVer=08/17/2004,0.0.2.0
-; Copyright (C) 2004 Al Borchers (alborchers@steinerpoint.com)
-
-[Manufacturer]
-%LINUX%=GSerialDeviceList
-
-[GSerialDeviceList]
-%GSERIAL%=GSerialInstall, USB\VID_0525&PID_A4A7
-
-[DestinationDirs]
-DefaultDestDir=10,System32\Drivers
-
-[GSerialInstall]
-CopyFiles=GSerialCopyFiles
-AddReg=GSerialAddReg
-
-[GSerialCopyFiles]
-usbser.sys
-
-[GSerialAddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,usbser.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[GSerialInstall.Services]
-AddService = usbser,0x0002,GSerialService
-
-[GSerialService]
-DisplayName = %GSERIAL_DISPLAY_NAME%
-ServiceType = 1 ; SERVICE_KERNEL_DRIVER
-StartType = 3 ; SERVICE_DEMAND_START
-ErrorControl = 1 ; SERVICE_ERROR_NORMAL
-ServiceBinary = %10%\System32\Drivers\usbser.sys
-LoadOrderGroup = Base
-
-[Strings]
-LINUX = "Linux"
-GSERIAL = "Gadget Serial"
-GSERIAL_DISPLAY_NAME = "USB Gadget Serial Driver"
--------------------- CUT HERE --------------------
-
-The "usbser.sys" file comes with various versions of Windows.
-For example, it can be found on Windows XP typically in
-
- C:\WINDOWS\Driver Cache\i386\driver.cab
-
-Or it can be found on the Windows 98SE CD in the "win98" folder
-in the "DRIVER11.CAB" through "DRIVER20.CAB" cab files. You will
-need the DOS "expand" program, the Cygwin "cabextract" program, or
-a similar program to unpack these cab files and extract "usbser.sys".
-
-For example, to extract "usbser.sys" into the current directory
-on Windows XP, open a DOS window and run a command like
-
- expand C:\WINDOWS\Driver~1\i386\driver.cab -F:usbser.sys .
-
-(Thanks to Nishant Kamat for pointing out this DOS command.)
+To use the Windows ACM driver you must have the "linux-cdc-acm.inf"
+file (provided along this document) which supports all recent versions
+of Windows.
When the gadget serial driver is loaded and the USB device connected
to the Windows host with a USB cable, Windows should recognize the
gadget serial device and ask for a driver. Tell Windows to find the
-driver in the folder that contains "gserial.inf" and "usbser.sys".
+driver in the folder that contains the "linux-cdc-acm.inf" file.
For example, on Windows XP, when the gadget serial device is first
plugged in, the "Found New Hardware Wizard" starts up. Select
-"Install from a list or specific location (Advanced)", then on
-the next screen select "Include this location in the search" and
-enter the path or browse to the folder containing "gserial.inf" and
-"usbser.sys". Windows will complain that the Gadget Serial driver
-has not passed Windows Logo testing, but select "Continue anyway"
-and finish the driver installation.
+"Install from a list or specific location (Advanced)", then on the
+next screen select "Include this location in the search" and enter the
+path or browse to the folder containing the "linux-cdc-acm.inf" file.
+Windows will complain that the Gadget Serial driver has not passed
+Windows Logo testing, but select "Continue anyway" and finish the
+driver installation.
On Windows XP, in the "Device Manager" (under "Control Panel",
"System", "Hardware") expand the "Ports (COM & LPT)" entry and you
side and host side systems. Anything you type on the terminal
window on the gadget side should appear in the terminal window on
the host side and vice versa.
-
-
- Bind a driver to that device. Bus frameworks do that using a
device driver's probe() routine.
-
+
- Tell other subsystems to configure the new device. Print
queues may need to be enabled, networks brought up, disk
partitions mounted, and so on. In some cases these will
Current versions of module-init-tools will create a "modules.usbmap" file
which contains the entries from each driver's MODULE_DEVICE_TABLE. Such
files can be used by various user mode policy agents to make sure all the
-right driver modules get loaded, either at boot time or later.
+right driver modules get loaded, either at boot time or later.
See <linux/usb.h> for full information about such table entries; or look
at existing drivers. Each table entry describes one or more criteria to
--- /dev/null
+; Windows USB CDC ACM Setup File
+
+; Based on INF template which was:
+; Copyright (c) 2000 Microsoft Corporation
+; Copyright (c) 2007 Microchip Technology Inc.
+; likely to be covered by the MLPL as found at:
+; <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
+; For use only on Windows operating systems.
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%Linux%
+DriverVer=11/15/2007,5.1.2600.0
+
+[Manufacturer]
+%Linux%=DeviceList, NTamd64
+
+[DestinationDirs]
+DefaultDestDir=12
+
+
+;------------------------------------------------------------------------------
+; Windows 2000/XP/Vista-32bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.nt]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.nt
+AddReg=DriverInstall.nt.AddReg
+
+[DriverCopyFiles.nt]
+usbser.sys,,,0x20
+
+[DriverInstall.nt.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,USBSER.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.nt.Services]
+AddService=usbser, 0x00000002, DriverService.nt
+
+[DriverService.nt]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\USBSER.sys
+
+;------------------------------------------------------------------------------
+; Vista-64bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.NTamd64]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.NTamd64
+AddReg=DriverInstall.NTamd64.AddReg
+
+[DriverCopyFiles.NTamd64]
+USBSER.sys,,,0x20
+
+[DriverInstall.NTamd64.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,USBSER.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.NTamd64.Services]
+AddService=usbser, 0x00000002, DriverService.NTamd64
+
+[DriverService.NTamd64]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\USBSER.sys
+
+
+;------------------------------------------------------------------------------
+; Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID. Use the format as shown
+; below.
+; Note: One INF file can be used for multiple devices with different
+; VID and PIDs. For each supported device, append
+; ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[SourceDisksFiles]
+[SourceDisksNames]
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
+
+
+;------------------------------------------------------------------------------
+; String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+Linux = "Linux Developer Community"
+DESCRIPTION = "Gadget Serial"
+SERVICE = "USB RS-232 Emulation Driver"
-; MS-Windows driver config matching some basic modes of the
-; Linux-USB Ethernet/RNDIS gadget firmware:
-;
-; - RNDIS plus CDC Ethernet ... this may be familiar as a DOCSIS
-; cable modem profile, and supports most non-Microsoft USB hosts
-;
-; - RNDIS plus CDC Subset ... used by hardware that incapable of
-; full CDC Ethernet support.
-;
-; Microsoft only directly supports RNDIS drivers, and bundled them into XP.
-; The Microsoft "Remote NDIS USB Driver Kit" is currently found at:
-; http://www.microsoft.com/whdc/device/network/ndis/rmndis.mspx
-
+; Based on template INF file found at
+; <http://msdn.microsoft.com/en-us/library/ff570620.aspx>
+; which was:
+; Copyright (c) Microsoft Corporation
+; and released under the MLPL as found at:
+; <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
+; For use only on Windows operating systems.
[Version]
-Signature = "$CHICAGO$"
+Signature = "$Windows NT$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %Linux%
-Compatible = 1
-MillenniumPreferred = .ME
-DriverVer = 03/30/2004,0.0.0.0
-; catalog file would be used by WHQL
-;CatalogFile = Linux.cat
+DriverVer = 06/21/2006,6.0.6000.16384
[Manufacturer]
-%Linux% = LinuxDevices,NT.5.1
+%Linux% = LinuxDevices,NTx86,NTamd64,NTia64
+
+; Decoration for x86 architecture
+[LinuxDevices.NTx86]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
-[LinuxDevices]
-; NetChip IDs, used by both firmware modes
-%LinuxDevice% = RNDIS, USB\VID_0525&PID_a4a2
+; Decoration for x64 architecture
+[LinuxDevices.NTamd64]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
-[LinuxDevices.NT.5.1]
-%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
+; Decoration for ia64 architecture
+[LinuxDevices.NTia64]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
+;@@@ This is the common setting for setup
[ControlFlags]
ExcludeFromSelect=*
-; Windows 98, Windows 98 Second Edition specific sections --------
-
-[RNDIS]
-DeviceID = usb8023
-MaxInstance = 512
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_98, RNDIS_AddReg_Common
-
-[RNDIS_AddReg_98]
-HKR, , DevLoader, 0, *ndis
-HKR, , DeviceVxDs, 0, usb8023.sys
-HKR, NDIS, LogDriverName, 0, "usb8023"
-HKR, NDIS, MajorNdisVersion, 1, 5
-HKR, NDIS, MinorNdisVersion, 1, 0
-HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_98"
-HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_98"
-HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_98"
-HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
-
-[RNDIS_Install_98]
-CopyFiles=RNDIS_CopyFiles_98
-
-[RNDIS_CopyFiles_98]
-usb8023.sys, usb8023w.sys, , 0
-rndismp.sys, rndismpw.sys, , 0
-
-; Windows Millennium Edition specific sections --------------------
-
-[RNDIS.ME]
-DeviceID = usb8023
-MaxInstance = 512
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_ME, RNDIS_AddReg_Common
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-
-[RNDIS_AddReg_ME]
-HKR, , DevLoader, 0, *ndis
-HKR, , DeviceVxDs, 0, usb8023.sys
-HKR, NDIS, LogDriverName, 0, "usb8023"
-HKR, NDIS, MajorNdisVersion, 1, 5
-HKR, NDIS, MinorNdisVersion, 1, 0
-HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_ME"
-HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_ME"
-HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_ME"
-HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
-
-[RNDIS_Install_ME]
-CopyFiles=RNDIS_CopyFiles_ME
-
-[RNDIS_CopyFiles_ME]
-usb8023.sys, usb8023m.sys, , 0
-rndismp.sys, rndismpm.sys, , 0
-
-; Windows 2000 specific sections ---------------------------------
-
-[RNDIS.NT]
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
-CopyFiles = RNDIS_CopyFiles_NT
-
-[RNDIS.NT.Services]
-AddService = USB_RNDIS, 2, RNDIS_ServiceInst_NT, RNDIS_EventLog
-
-[RNDIS_CopyFiles_NT]
-; no rename of files on Windows 2000, use the 'k' names as is
-usb8023k.sys, , , 0
-rndismpk.sys, , , 0
-
-[RNDIS_ServiceInst_NT]
-DisplayName = %ServiceDisplayName%
-ServiceType = 1
-StartType = 3
-ErrorControl = 1
-ServiceBinary = %12%\usb8023k.sys
-LoadOrderGroup = NDIS
-AddReg = RNDIS_WMI_AddReg_NT
-
-[RNDIS_WMI_AddReg_NT]
-HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismpk.sys"
-
-; Windows XP specific sections -----------------------------------
-
+; DDInstall section
+; References the in-build Netrndis.inf
[RNDIS.NT.5.1]
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
-; no copyfiles - the files are already in place
-
+Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
+BusType = 15
+; NEVER REMOVE THE FOLLOWING REFERENCE FOR NETRNDIS.INF
+include = netrndis.inf
+needs = Usb_Rndis.ndi
+AddReg = Rndis_AddReg_Vista
+
+; DDInstal.Services section
[RNDIS.NT.5.1.Services]
-AddService = USB_RNDIS, 2, RNDIS_ServiceInst_51, RNDIS_EventLog
-
-[RNDIS_ServiceInst_51]
-DisplayName = %ServiceDisplayName%
-ServiceType = 1
-StartType = 3
-ErrorControl = 1
-ServiceBinary = %12%\usb8023.sys
-LoadOrderGroup = NDIS
-AddReg = RNDIS_WMI_AddReg_51
-
-[RNDIS_WMI_AddReg_51]
-HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismp.sys"
-
-; Windows 2000 and Windows XP common sections --------------------
-
-[RNDIS_AddReg_NT]
-HKR, Ndi, Service, 0, "USB_RNDIS"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-
-[RNDIS_EventLog]
-AddReg = RNDIS_EventLog_AddReg
-
-[RNDIS_EventLog_AddReg]
-HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
-HKR, , TypesSupported, 0x00010001, 7
-
-; Common Sections -------------------------------------------------
-
-[RNDIS_AddReg_Common]
-HKR, NDI\params\NetworkAddress, ParamDesc, 0, %NetworkAddress%
-HKR, NDI\params\NetworkAddress, type, 0, "edit"
-HKR, NDI\params\NetworkAddress, LimitText, 0, "12"
-HKR, NDI\params\NetworkAddress, UpperCase, 0, "1"
-HKR, NDI\params\NetworkAddress, default, 0, " "
-HKR, NDI\params\NetworkAddress, optional, 0, "1"
-
-[SourceDisksNames]
-1=%SourceDisk%,,1
-
-[SourceDisksFiles]
-usb8023m.sys=1
-rndismpm.sys=1
-usb8023w.sys=1
-rndismpw.sys=1
-usb8023k.sys=1
-rndismpk.sys=1
-
-[DestinationDirs]
-RNDIS_CopyFiles_98 = 10, system32/drivers
-RNDIS_CopyFiles_ME = 10, system32/drivers
-RNDIS_CopyFiles_NT = 12
+include = netrndis.inf
+needs = Usb_Rndis.ndi.Services
+
+; Optional registry settings. You can modify as needed.
+[RNDIS_AddReg_Vista]
+HKR, NDI\params\VistaProperty, ParamDesc, 0, %Vista_Property%
+HKR, NDI\params\VistaProperty, type, 0, "edit"
+HKR, NDI\params\VistaProperty, LimitText, 0, "12"
+HKR, NDI\params\VistaProperty, UpperCase, 0, "1"
+HKR, NDI\params\VistaProperty, default, 0, " "
+HKR, NDI\params\VistaProperty, optional, 0, "1"
+
+; No sys copyfiles - the sys files are already in-build
+; (part of the operating system).
+; We do not support XP SP1-, 2003 SP1-, ME, 9x.
[Strings]
-ServiceDisplayName = "USB Remote NDIS Network Device Driver"
-NetworkAddress = "Network Address"
Linux = "Linux Developer Community"
LinuxDevice = "Linux USB Ethernet/RNDIS Gadget"
-SourceDisk = "Ethernet/RNDIS Gadget Driver Install Disk"
-
+Vista_Property = "Optional Vista Property"
--- /dev/null
+Introduction
+============
+
+The V4L2 control API seems simple enough, but quickly becomes very hard to
+implement correctly in drivers. But much of the code needed to handle controls
+is actually not driver specific and can be moved to the V4L core framework.
+
+After all, the only part that a driver developer is interested in is:
+
+1) How do I add a control?
+2) How do I set the control's value? (i.e. s_ctrl)
+
+And occasionally:
+
+3) How do I get the control's value? (i.e. g_volatile_ctrl)
+4) How do I validate the user's proposed control value? (i.e. try_ctrl)
+
+All the rest is something that can be done centrally.
+
+The control framework was created in order to implement all the rules of the
+V4L2 specification with respect to controls in a central place. And to make
+life as easy as possible for the driver developer.
+
+Note that the control framework relies on the presence of a struct v4l2_device
+for V4L2 drivers and struct v4l2_subdev for sub-device drivers.
+
+
+Objects in the framework
+========================
+
+There are two main objects:
+
+The v4l2_ctrl object describes the control properties and keeps track of the
+control's value (both the current value and the proposed new value).
+
+v4l2_ctrl_handler is the object that keeps track of controls. It maintains a
+list of v4l2_ctrl objects that it owns and another list of references to
+controls, possibly to controls owned by other handlers.
+
+
+Basic usage for V4L2 and sub-device drivers
+===========================================
+
+1) Prepare the driver:
+
+1.1) Add the handler to your driver's top-level struct:
+
+ struct foo_dev {
+ ...
+ struct v4l2_ctrl_handler ctrl_handler;
+ ...
+ };
+
+ struct foo_dev *foo;
+
+1.2) Initialize the handler:
+
+ v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+
+ The second argument is a hint telling the function how many controls this
+ handler is expected to handle. It will allocate a hashtable based on this
+ information. It is a hint only.
+
+1.3) Hook the control handler into the driver:
+
+1.3.1) For V4L2 drivers do this:
+
+ struct foo_dev {
+ ...
+ struct v4l2_device v4l2_dev;
+ ...
+ struct v4l2_ctrl_handler ctrl_handler;
+ ...
+ };
+
+ foo->v4l2_dev.ctrl_handler = &foo->ctrl_handler;
+
+ Where foo->v4l2_dev is of type struct v4l2_device.
+
+ Finally, remove all control functions from your v4l2_ioctl_ops:
+ vidioc_queryctrl, vidioc_querymenu, vidioc_g_ctrl, vidioc_s_ctrl,
+ vidioc_g_ext_ctrls, vidioc_try_ext_ctrls and vidioc_s_ext_ctrls.
+ Those are now no longer needed.
+
+1.3.2) For sub-device drivers do this:
+
+ struct foo_dev {
+ ...
+ struct v4l2_subdev sd;
+ ...
+ struct v4l2_ctrl_handler ctrl_handler;
+ ...
+ };
+
+ foo->sd.ctrl_handler = &foo->ctrl_handler;
+
+ Where foo->sd is of type struct v4l2_subdev.
+
+ And set all core control ops in your struct v4l2_subdev_core_ops to these
+ helpers:
+
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+
+ Note: this is a temporary solution only. Once all V4L2 drivers that depend
+ on subdev drivers are converted to the control framework these helpers will
+ no longer be needed.
+
+1.4) Clean up the handler at the end:
+
+ v4l2_ctrl_handler_free(&foo->ctrl_handler);
+
+
+2) Add controls:
+
+You add non-menu controls by calling v4l2_ctrl_new_std:
+
+ struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 min, s32 max, u32 step, s32 def);
+
+Menu controls are added by calling v4l2_ctrl_new_std_menu:
+
+ struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 max, s32 skip_mask, s32 def);
+
+These functions are typically called right after the v4l2_ctrl_handler_init:
+
+ v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+ v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 255, 1, 128);
+ v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops,
+ V4L2_CID_POWER_LINE_FREQUENCY,
+ V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0,
+ V4L2_CID_POWER_LINE_FREQUENCY_DISABLED);
+ ...
+ if (foo->ctrl_handler.error) {
+ int err = foo->ctrl_handler.error;
+
+ v4l2_ctrl_handler_free(&foo->ctrl_handler);
+ return err;
+ }
+
+The v4l2_ctrl_new_std function returns the v4l2_ctrl pointer to the new
+control, but if you do not need to access the pointer outside the control ops,
+then there is no need to store it.
+
+The v4l2_ctrl_new_std function will fill in most fields based on the control
+ID except for the min, max, step and default values. These are passed in the
+last four arguments. These values are driver specific while control attributes
+like type, name, flags are all global. The control's current value will be set
+to the default value.
+
+The v4l2_ctrl_new_std_menu function is very similar but it is used for menu
+controls. There is no min argument since that is always 0 for menu controls,
+and instead of a step there is a skip_mask argument: if bit X is 1, then menu
+item X is skipped.
+
+Note that if something fails, the function will return NULL or an error and
+set ctrl_handler->error to the error code. If ctrl_handler->error was already
+set, then it will just return and do nothing. This is also true for
+v4l2_ctrl_handler_init if it cannot allocate the internal data structure.
+
+This makes it easy to init the handler and just add all controls and only check
+the error code at the end. Saves a lot of repetitive error checking.
+
+It is recommended to add controls in ascending control ID order: it will be
+a bit faster that way.
+
+3) Optionally force initial control setup:
+
+ v4l2_ctrl_handler_setup(&foo->ctrl_handler);
+
+This will call s_ctrl for all controls unconditionally. Effectively this
+initializes the hardware to the default control values. It is recommended
+that you do this as this ensures that both the internal data structures and
+the hardware are in sync.
+
+4) Finally: implement the v4l2_ctrl_ops
+
+ static const struct v4l2_ctrl_ops foo_ctrl_ops = {
+ .s_ctrl = foo_s_ctrl,
+ };
+
+Usually all you need is s_ctrl:
+
+ static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+ {
+ struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ write_reg(0x123, ctrl->val);
+ break;
+ case V4L2_CID_CONTRAST:
+ write_reg(0x456, ctrl->val);
+ break;
+ }
+ return 0;
+ }
+
+The control ops are called with the v4l2_ctrl pointer as argument.
+The new control value has already been validated, so all you need to do is
+to actually update the hardware registers.
+
+You're done! And this is sufficient for most of the drivers we have. No need
+to do any validation of control values, or implement QUERYCTRL/QUERYMENU. And
+G/S_CTRL as well as G/TRY/S_EXT_CTRLS are automatically supported.
+
+
+==============================================================================
+
+The remainder of this document deals with more advanced topics and scenarios.
+In practice the basic usage as described above is sufficient for most drivers.
+
+===============================================================================
+
+
+Inheriting Controls
+===================
+
+When a sub-device is registered with a V4L2 driver by calling
+v4l2_device_register_subdev() and the ctrl_handler fields of both v4l2_subdev
+and v4l2_device are set, then the controls of the subdev will become
+automatically available in the V4L2 driver as well. If the subdev driver
+contains controls that already exist in the V4L2 driver, then those will be
+skipped (so a V4L2 driver can always override a subdev control).
+
+What happens here is that v4l2_device_register_subdev() calls
+v4l2_ctrl_add_handler() adding the controls of the subdev to the controls
+of v4l2_device.
+
+
+Accessing Control Values
+========================
+
+The v4l2_ctrl struct contains these two unions:
+
+ /* The current control value. */
+ union {
+ s32 val;
+ s64 val64;
+ char *string;
+ } cur;
+
+ /* The new control value. */
+ union {
+ s32 val;
+ s64 val64;
+ char *string;
+ };
+
+Within the control ops you can freely use these. The val and val64 speak for
+themselves. The string pointers point to character buffers of length
+ctrl->maximum + 1, and are always 0-terminated.
+
+In most cases 'cur' contains the current cached control value. When you create
+a new control this value is made identical to the default value. After calling
+v4l2_ctrl_handler_setup() this value is passed to the hardware. It is generally
+a good idea to call this function.
+
+Whenever a new value is set that new value is automatically cached. This means
+that most drivers do not need to implement the g_volatile_ctrl() op. The
+exception is for controls that return a volatile register such as a signal
+strength read-out that changes continuously. In that case you will need to
+implement g_volatile_ctrl like this:
+
+ static int foo_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+ {
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ ctrl->cur.val = read_reg(0x123);
+ break;
+ }
+ }
+
+The 'new value' union is not used in g_volatile_ctrl. In general controls
+that need to implement g_volatile_ctrl are read-only controls.
+
+To mark a control as volatile you have to set the is_volatile flag:
+
+ ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
+ if (ctrl)
+ ctrl->is_volatile = 1;
+
+For try/s_ctrl the new values (i.e. as passed by the user) are filled in and
+you can modify them in try_ctrl or set them in s_ctrl. The 'cur' union
+contains the current value, which you can use (but not change!) as well.
+
+If s_ctrl returns 0 (OK), then the control framework will copy the new final
+values to the 'cur' union.
+
+While in g_volatile/s/try_ctrl you can access the value of all controls owned
+by the same handler since the handler's lock is held. If you need to access
+the value of controls owned by other handlers, then you have to be very careful
+not to introduce deadlocks.
+
+Outside of the control ops you have to go through to helper functions to get
+or set a single control value safely in your driver:
+
+ s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
+ int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
+
+These functions go through the control framework just as VIDIOC_G/S_CTRL ioctls
+do. Don't use these inside the control ops g_volatile/s/try_ctrl, though, that
+will result in a deadlock since these helpers lock the handler as well.
+
+You can also take the handler lock yourself:
+
+ mutex_lock(&state->ctrl_handler.lock);
+ printk(KERN_INFO "String value is '%s'\n", ctrl1->cur.string);
+ printk(KERN_INFO "Integer value is '%s'\n", ctrl2->cur.val);
+ mutex_unlock(&state->ctrl_handler.lock);
+
+
+Menu Controls
+=============
+
+The v4l2_ctrl struct contains this union:
+
+ union {
+ u32 step;
+ u32 menu_skip_mask;
+ };
+
+For menu controls menu_skip_mask is used. What it does is that it allows you
+to easily exclude certain menu items. This is used in the VIDIOC_QUERYMENU
+implementation where you can return -EINVAL if a certain menu item is not
+present. Note that VIDIOC_QUERYCTRL always returns a step value of 1 for
+menu controls.
+
+A good example is the MPEG Audio Layer II Bitrate menu control where the
+menu is a list of standardized possible bitrates. But in practice hardware
+implementations will only support a subset of those. By setting the skip
+mask you can tell the framework which menu items should be skipped. Setting
+it to 0 means that all menu items are supported.
+
+You set this mask either through the v4l2_ctrl_config struct for a custom
+control, or by calling v4l2_ctrl_new_std_menu().
+
+
+Custom Controls
+===============
+
+Driver specific controls can be created using v4l2_ctrl_new_custom():
+
+ static const struct v4l2_ctrl_config ctrl_filter = {
+ .ops = &ctrl_custom_ops,
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
+ .name = "Spatial Filter",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .flags = V4L2_CTRL_FLAG_SLIDER,
+ .max = 15,
+ .step = 1,
+ };
+
+ ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_filter, NULL);
+
+The last argument is the priv pointer which can be set to driver-specific
+private data.
+
+The v4l2_ctrl_config struct also has fields to set the is_private and is_volatile
+flags.
+
+If the name field is not set, then the framework will assume this is a standard
+control and will fill in the name, type and flags fields accordingly.
+
+
+Active and Grabbed Controls
+===========================
+
+If you get more complex relationships between controls, then you may have to
+activate and deactivate controls. For example, if the Chroma AGC control is
+on, then the Chroma Gain control is inactive. That is, you may set it, but
+the value will not be used by the hardware as long as the automatic gain
+control is on. Typically user interfaces can disable such input fields.
+
+You can set the 'active' status using v4l2_ctrl_activate(). By default all
+controls are active. Note that the framework does not check for this flag.
+It is meant purely for GUIs. The function is typically called from within
+s_ctrl.
+
+The other flag is the 'grabbed' flag. A grabbed control means that you cannot
+change it because it is in use by some resource. Typical examples are MPEG
+bitrate controls that cannot be changed while capturing is in progress.
+
+If a control is set to 'grabbed' using v4l2_ctrl_grab(), then the framework
+will return -EBUSY if an attempt is made to set this control. The
+v4l2_ctrl_grab() function is typically called from the driver when it
+starts or stops streaming.
+
+
+Control Clusters
+================
+
+By default all controls are independent from the others. But in more
+complex scenarios you can get dependencies from one control to another.
+In that case you need to 'cluster' them:
+
+ struct foo {
+ struct v4l2_ctrl_handler ctrl_handler;
+#define AUDIO_CL_VOLUME (0)
+#define AUDIO_CL_MUTE (1)
+ struct v4l2_ctrl *audio_cluster[2];
+ ...
+ };
+
+ state->audio_cluster[AUDIO_CL_VOLUME] =
+ v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+ state->audio_cluster[AUDIO_CL_MUTE] =
+ v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+ v4l2_ctrl_cluster(ARRAY_SIZE(state->audio_cluster), state->audio_cluster);
+
+From now on whenever one or more of the controls belonging to the same
+cluster is set (or 'gotten', or 'tried'), only the control ops of the first
+control ('volume' in this example) is called. You effectively create a new
+composite control. Similar to how a 'struct' works in C.
+
+So when s_ctrl is called with V4L2_CID_AUDIO_VOLUME as argument, you should set
+all two controls belonging to the audio_cluster:
+
+ static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+ {
+ struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_VOLUME: {
+ struct v4l2_ctrl *mute = ctrl->cluster[AUDIO_CL_MUTE];
+
+ write_reg(0x123, mute->val ? 0 : ctrl->val);
+ break;
+ }
+ case V4L2_CID_CONTRAST:
+ write_reg(0x456, ctrl->val);
+ break;
+ }
+ return 0;
+ }
+
+In the example above the following are equivalent for the VOLUME case:
+
+ ctrl == ctrl->cluster[AUDIO_CL_VOLUME] == state->audio_cluster[AUDIO_CL_VOLUME]
+ ctrl->cluster[AUDIO_CL_MUTE] == state->audio_cluster[AUDIO_CL_MUTE]
+
+Note that controls in a cluster may be NULL. For example, if for some
+reason mute was never added (because the hardware doesn't support that
+particular feature), then mute will be NULL. So in that case we have a
+cluster of 2 controls, of which only 1 is actually instantiated. The
+only restriction is that the first control of the cluster must always be
+present, since that is the 'master' control of the cluster. The master
+control is the one that identifies the cluster and that provides the
+pointer to the v4l2_ctrl_ops struct that is used for that cluster.
+
+Obviously, all controls in the cluster array must be initialized to either
+a valid control or to NULL.
+
+
+VIDIOC_LOG_STATUS Support
+=========================
+
+This ioctl allow you to dump the current status of a driver to the kernel log.
+The v4l2_ctrl_handler_log_status(ctrl_handler, prefix) can be used to dump the
+value of the controls owned by the given handler to the log. You can supply a
+prefix as well. If the prefix didn't end with a space, then ': ' will be added
+for you.
+
+
+Different Handlers for Different Video Nodes
+============================================
+
+Usually the V4L2 driver has just one control handler that is global for
+all video nodes. But you can also specify different control handlers for
+different video nodes. You can do that by manually setting the ctrl_handler
+field of struct video_device.
+
+That is no problem if there are no subdevs involved but if there are, then
+you need to block the automatic merging of subdev controls to the global
+control handler. You do that by simply setting the ctrl_handler field in
+struct v4l2_device to NULL. Now v4l2_device_register_subdev() will no longer
+merge subdev controls.
+
+After each subdev was added, you will then have to call v4l2_ctrl_add_handler
+manually to add the subdev's control handler (sd->ctrl_handler) to the desired
+control handler. This control handler may be specific to the video_device or
+for a subset of video_device's. For example: the radio device nodes only have
+audio controls, while the video and vbi device nodes share the same control
+handler for the audio and video controls.
+
+If you want to have one handler (e.g. for a radio device node) have a subset
+of another handler (e.g. for a video device node), then you should first add
+the controls to the first handler, add the other controls to the second
+handler and finally add the first handler to the second. For example:
+
+ v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_VOLUME, ...);
+ v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+ v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler);
+
+Or you can add specific controls to a handler:
+
+ volume = v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_AUDIO_VOLUME, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_BRIGHTNESS, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_CONTRAST, ...);
+ v4l2_ctrl_add_ctrl(&radio_ctrl_handler, volume);
+
+What you should not do is make two identical controls for two handlers.
+For example:
+
+ v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_AUDIO_MUTE, ...);
+
+This would be bad since muting the radio would not change the video mute
+control. The rule is to have one control for each hardware 'knob' that you
+can twiddle.
+
+
+Finding Controls
+================
+
+Normally you have created the controls yourself and you can store the struct
+v4l2_ctrl pointer into your own struct.
+
+But sometimes you need to find a control from another handler that you do
+not own. For example, if you have to find a volume control from a subdev.
+
+You can do that by calling v4l2_ctrl_find:
+
+ struct v4l2_ctrl *volume;
+
+ volume = v4l2_ctrl_find(sd->ctrl_handler, V4L2_CID_AUDIO_VOLUME);
+
+Since v4l2_ctrl_find will lock the handler you have to be careful where you
+use it. For example, this is not a good idea:
+
+ struct v4l2_ctrl_handler ctrl_handler;
+
+ v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+ v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+
+...and in video_ops.s_ctrl:
+
+ case V4L2_CID_BRIGHTNESS:
+ contrast = v4l2_find_ctrl(&ctrl_handler, V4L2_CID_CONTRAST);
+ ...
+
+When s_ctrl is called by the framework the ctrl_handler.lock is already taken, so
+attempting to find another control from the same handler will deadlock.
+
+It is recommended not to use this function from inside the control ops.
+
+
+Inheriting Controls
+===================
+
+When one control handler is added to another using v4l2_ctrl_add_handler, then
+by default all controls from one are merged to the other. But a subdev might
+have low-level controls that make sense for some advanced embedded system, but
+not when it is used in consumer-level hardware. In that case you want to keep
+those low-level controls local to the subdev. You can do this by simply
+setting the 'is_private' flag of the control to 1:
+
+ static const struct v4l2_ctrl_config ctrl_private = {
+ .ops = &ctrl_custom_ops,
+ .id = V4L2_CID_...,
+ .name = "Some Private Control",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .max = 15,
+ .step = 1,
+ .is_private = 1,
+ };
+
+ ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_private, NULL);
+
+These controls will now be skipped when v4l2_ctrl_add_handler is called.
+
+
+V4L2_CTRL_TYPE_CTRL_CLASS Controls
+==================================
+
+Controls of this type can be used by GUIs to get the name of the control class.
+A fully featured GUI can make a dialog with multiple tabs with each tab
+containing the controls belonging to a particular control class. The name of
+each tab can be found by querying a special control with ID <control class | 1>.
+
+Drivers do not have to care about this. The framework will automatically add
+a control of this type whenever the first control belonging to a new control
+class is added.
+
+
+Differences from the Spec
+=========================
+
+There are a few places where the framework acts slightly differently from the
+V4L2 Specification. Those differences are described in this section. We will
+have to see whether we need to adjust the spec or not.
+
+1) It is no longer required to have all controls contained in a
+v4l2_ext_control array be from the same control class. The framework will be
+able to handle any type of control in the array. You need to set ctrl_class
+to 0 in order to enable this. If ctrl_class is non-zero, then it will still
+check that all controls belong to that control class.
+
+If you set ctrl_class to 0 and count to 0, then it will only return an error
+if there are no controls at all.
+
+2) Clarified the way error_idx works. For get and set it will be equal to
+count if nothing was done yet. If it is less than count then only the controls
+up to error_idx-1 were successfully applied.
+
+3) When attempting to read a button control the framework will return -EACCES
+instead of -EINVAL as stated in the spec. It seems to make more sense since
+button controls are write-only controls.
+
+4) Attempting to write to a read-only control will return -EACCES instead of
+-EINVAL as the spec says.
+
+5) The spec does not mention what should happen when you try to set/get a
+control class controls. ivtv currently returns -EINVAL (indicating that the
+control ID does not exist) while the framework will return -EACCES, which
+makes more sense.
+
+
+Proposals for Extensions
+========================
+
+Some ideas for future extensions to the spec:
+
+1) Add a V4L2_CTRL_FLAG_HEX to have values shown as hexadecimal instead of
+decimal. Useful for e.g. video_mute_yuv.
+
+2) It is possible to mark in the controls array which controls have been
+successfully written and which failed by for example adding a bit to the
+control ID. Not sure if it is worth the effort, though.
+
+3) Trying to set volatile inactive controls should result in -EACCESS.
+
+4) Add a new flag to mark volatile controls. Any application that wants
+to store the state of the controls can then skip volatile inactive controls.
+Currently it is not possible to detect such controls.
S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
+M: Hans Ulli Kroll <ulli.kroll@googlemail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T: git git://gitorious.org/linux-gemini/mainline.git
-S: Odd Fixes
+T: git git://git.berlios.de/gemini-board
+S: Maintained
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
-M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
+M: Hans Ulli Kroll <ulli.kroll@googlemail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Odd Fixes
+S: Maintained
+T: git://git.berlios.de/gemini-board
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
F: arch/arm/mach-sa1100/jornada720.c
F: arch/arm/mach-sa1100/include/mach/jornada720.h
+ARM/INCOME PXA270 SUPPORT
+M: Marek Vasut <marek.vasut@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-pxa/income.c
+F: arch/arm/mach-pxa/include/mach-pxa/income.h
+
ARM/INTEL IOP32X ARM ARCHITECTURE
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
M: Paul Mundt <lethal@linux-sh.org>
M: Magnus Damm <magnus.damm@gmail.com>
L: linux-sh@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
W: http://oss.renesas.com
+Q: http://patchwork.kernel.org/project/linux-sh/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
S: Supported
F: arch/arm/mach-shmobile/
F: drivers/sh/
F: drivers/mmc/host/cb710-mmc.*
F: include/linux/cb710.h
+ENE KB2426 (ENE0100/ENE020XX) INFRARED RECEIVER
+M: Maxim Levitsky <maximlevitsky@gmail.com>
+S: Maintained
+F: drivers/media/IR/ene_ir.c
+F: drivers/media/IR/ene_ir.h
+
EPSON 1355 FRAMEBUFFER DRIVER
M: Christopher Hoover <ch@murgatroid.com>
M: Christopher Hoover <ch@hpl.hp.com>
S: Maintained
F: drivers/char/pc8736x_gpio.c
+PC87427 HARDWARE MONITORING DRIVER
+M: Jean Delvare <khali@linux-fr.org>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/pc87427
+F: drivers/hwmon/pc87427.c
+
PCA9532 LED DRIVER
M: Riku Voipio <riku.voipio@iki.fi>
S: Maintained
F: Documentation/hwmon/smm665
F: drivers/hwmon/smm665.c
+SMSC EMC2103 HARDWARE MONITOR DRIVER
+M: Steve Glendinning <steve.glendinning@smsc.com>
+L: lm-sensors@lm-sensors.org
+S: Supported
+F: Documentation/hwmon/emc2103
+F: drivers/hwmon/emc2103.c
+
SMSC47B397 HARDWARE MONITOR DRIVER
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: lm-sensors@lm-sensors.org
F: drivers/input/touchscreen/*wm97*
F: include/linux/wm97xx.h
-WOLFSON MICROELECTRONICS PMIC DRIVERS
+WOLFSON MICROELECTRONICS DRIVERS
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
+M: Ian Lartey <ian@opensource.wolfsonmicro.com>
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
W: http://opensource.wolfsonmicro.com/node/8
S: Supported
F: include/linux/mfd/wm831x/
F: include/linux/mfd/wm8350/
F: include/linux/mfd/wm8400*
-F: sound/soc/codecs/wm8350.*
-F: sound/soc/codecs/wm8400.*
+F: include/sound/wm????.h
+F: sound/soc/codecs/wm*
X.25 NETWORK LAYER
M: Andrew Hendry <andrew.hendry@gmail.com>
VERSION = 2
PATCHLEVEL = 6
-SUBLEVEL = 35
-EXTRAVERSION =
+SUBLEVEL = 36
+EXTRAVERSION = -rc1
NAME = Sheep on Meth
# *DOCUMENTATION*
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
export KBUILD_BUILDHOST := $(SUBARCH)
ARCH ?= $(SUBARCH)
-CROSS_COMPILE ?=
CROSS_COMPILE ?= $(CONFIG_CROSS_COMPILE:"%"=%)
# Architecture as present in compile.h
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.9-rc2
-# Sat Sep 25 15:38:35 2004
-#
-CONFIG_ALPHA=y
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_GENERIC_IOMAP is not set
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
+CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# System setup
-#
-CONFIG_ALPHA_GENERIC=y
-# CONFIG_ALPHA_ALCOR is not set
-# CONFIG_ALPHA_XL is not set
-# CONFIG_ALPHA_BOOK1 is not set
-# CONFIG_ALPHA_AVANTI_CH is not set
-# CONFIG_ALPHA_CABRIOLET is not set
-# CONFIG_ALPHA_DP264 is not set
-# CONFIG_ALPHA_EB164 is not set
-# CONFIG_ALPHA_EB64P_CH is not set
-# CONFIG_ALPHA_EB66 is not set
-# CONFIG_ALPHA_EB66P is not set
-# CONFIG_ALPHA_EIGER is not set
-# CONFIG_ALPHA_JENSEN is not set
-# CONFIG_ALPHA_LX164 is not set
-# CONFIG_ALPHA_LYNX is not set
-# CONFIG_ALPHA_MARVEL is not set
-# CONFIG_ALPHA_MIATA is not set
-# CONFIG_ALPHA_MIKASA is not set
-# CONFIG_ALPHA_NAUTILUS is not set
-# CONFIG_ALPHA_NONAME_CH is not set
-# CONFIG_ALPHA_NORITAKE is not set
-# CONFIG_ALPHA_PC164 is not set
-# CONFIG_ALPHA_P2K is not set
-# CONFIG_ALPHA_RAWHIDE is not set
-# CONFIG_ALPHA_RUFFIAN is not set
-# CONFIG_ALPHA_RX164 is not set
-# CONFIG_ALPHA_SX164 is not set
-# CONFIG_ALPHA_SABLE is not set
-# CONFIG_ALPHA_SHARK is not set
-# CONFIG_ALPHA_TAKARA is not set
-# CONFIG_ALPHA_TITAN is not set
-# CONFIG_ALPHA_WILDFIRE is not set
-CONFIG_ISA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_ALPHA_CORE_AGP=y
-CONFIG_ALPHA_BROKEN_IRQ_MASK=y
-CONFIG_EISA=y
-# CONFIG_SMP is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_VERBOSE_MCHECK=y
-CONFIG_VERBOSE_MCHECK_ON=1
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-CONFIG_EISA_PCI_EISA=y
-CONFIG_EISA_VIRTUAL_ROOT=y
-CONFIG_EISA_NAMES=y
CONFIG_SRM_ENV=m
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_EM86 is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_VLAN_8021Q=m
CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
CONFIG_ISAPNP=y
-
-#
-# Block devices
-#
CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=y
-# CONFIG_WDC_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
CONFIG_BLK_DEV_CY82C693=y
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
-# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
-CONFIG_AIC7XXX_RESET_DELAY_MS=5000
-# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_SIM710 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-# CONFIG_IP_NF_MATCH_HELPER is not set
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_IP_NF_COMPAT_IPCHAINS=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_3C515 is not set
CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=y
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_OSF_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_SEMAPHORE is not set
CONFIG_ALPHA_LEGACY_START_ADDRESS=y
CONFIG_MATHEMU=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WHIRLPOOL is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
include include/asm-generic/Kbuild.asm
+header-y += compiler.h
+header-y += console.h
+header-y += fpu.h
header-y += gentrap.h
-header-y += regdef.h
header-y += pal.h
header-y += reg.h
-
-unifdef-y += console.h
-unifdef-y += fpu.h
-unifdef-y += sysinfo.h
-unifdef-y += compiler.h
+header-y += regdef.h
+header-y += sysinfo.h
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h) (1)
#define dma_cache_sync(dev, va, size, dir) ((void)0)
-#define dma_get_cache_alignment() L1_CACHE_BYTES
#endif /* _ALPHA_DMA_MAPPING_H */
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
+# define TIOCPKT_IOCTL 64
#define TIOCNOTTY 0x5422
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#endif /* _ASM_ALPHA_IOCTLS_H */
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (~0UL)
-
#endif /* !(_ALPHA_SCATTERLIST_H) */
#define FLUSHO 0x00800000
#define PENDIN 0x20000000
#define IEXTEN 0x00000400
+#define EXTPROC 0x10000000
/* Values for the ACTION argument to `tcflow'. */
#define TCOOFF 0
}
static int
-do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer,
+do_osf_statfs(struct path *path, struct osf_statfs __user *buffer,
unsigned long bufsiz)
{
struct kstatfs linux_stat;
- int error = vfs_statfs(dentry, &linux_stat);
+ int error = vfs_statfs(path, &linux_stat);
if (!error)
error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz);
return error;
}
-SYSCALL_DEFINE3(osf_statfs, char __user *, pathname,
+SYSCALL_DEFINE3(osf_statfs, const char __user *, pathname,
struct osf_statfs __user *, buffer, unsigned long, bufsiz)
{
struct path path;
retval = user_path(pathname, &path);
if (!retval) {
- retval = do_osf_statfs(path.dentry, buffer, bufsiz);
+ retval = do_osf_statfs(&path buffer, bufsiz);
path_put(&path);
}
return retval;
retval = -EBADF;
file = fget(fd);
if (file) {
- retval = do_osf_statfs(file->f_path.dentry, buffer, bufsiz);
+ retval = do_osf_statfs(&file->f_path, buffer, bufsiz);
fput(file);
}
return retval;
return do_mount("", dirname, "proc", flags, NULL);
}
-SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
+SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, const char __user *, path,
int, flag, void __user *, data)
{
int retval;
}
-SYSCALL_DEFINE2(osf_utimes, char __user *, filename,
+SYSCALL_DEFINE2(osf_utimes, const char __user *, filename,
struct timeval32 __user *, tvs)
{
struct timespec tv[2];
* sys_execve() executes a new program.
*/
asmlinkage int
-do_sys_execve(char __user *ufilename, char __user * __user *argv,
- char __user * __user *envp, struct pt_regs *regs)
+do_sys_execve(const char __user *ufilename,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp, struct pt_regs *regs)
{
int error;
char *filename;
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S3C64XX series based systems
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
+ select HAVE_S3C2410_WATCHDOG
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C_RTC
help
Samsung S5P6440 CPU based systems
select GENERIC_GPIO
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S5P6442 CPU based systems
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C_RTC
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S5PC100 series based systems
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C_RTC
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
+config ARCH_S5PV310
+ bool "Samsung S5PV310/S5PC210"
+ select CPU_V7
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select GENERIC_CLOCKEVENTS
+ help
+ Samsung S5PV310 series based systems
+
config ARCH_SHARK
bool "Shark"
select CPU_SA110
source "arch/arm/mach-s5pv210/Kconfig"
+source "arch/arm/mach-s5pv310/Kconfig"
+
source "arch/arm/mach-shmobile/Kconfig"
source "arch/arm/plat-stmp3xxx/Kconfig"
is not correctly implemented in PL310 as clean lines are not
invalidated as a result of these operations. Note that this errata
uses Texas Instrument's secure monitor api.
+
+config ARM_ERRATA_720789
+ bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 720789 Cortex-A9 (prior to
+ r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
+ broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
+ As a consequence of this erratum, some TLB entries which should be
+ invalidated are not, resulting in an incoherency in the system page
+ tables. The workaround changes the TLB flushing routines to invalidate
+ entries regardless of the ASID.
endmenu
source "arch/arm/common/Kconfig"
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
- ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
+ ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
- select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || \
- ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
+ select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\
+ ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
bool "Use local timer interrupts"
depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
- ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
+ ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
default y
- select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || \\
- ARCH_U8500 || ARCH_TEGRA
+ select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \
+ ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
config HZ
int
- default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
+ ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
KBUILD_CFLAGS +=$(call cc-option,-marm,)
+# Never generate .eh_frame
+KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
+
# Do not use arch/arm/defconfig - it's always outdated.
# Select a platform tht is kept up-to-date
KBUILD_DEFCONFIG := versatile_defconfig
machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
+machine-$(CONFIG_ARCH_S5PV310) := s5pv310
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
OBJS += head-xscale.o
endif
-ifeq ($(CONFIG_PXA_SHARPSL),y)
+ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y)
OBJS += head-sharpsl.o
endif
.text
adr r0, LC0
- ARM( ldmia r0, {r1, r2, r3, r5, r6, r11, ip, sp})
- THUMB( ldmia r0, {r1, r2, r3, r5, r6, r11, ip} )
- THUMB( ldr sp, [r0, #32] )
+ ldmia r0, {r1, r2, r3, r5, r6, r11, ip}
+ ldr sp, [r0, #28]
#ifdef CONFIG_AUTO_ZRELADDR
@ determine final kernel image address
and r4, pc, #0xf8000000
return 0;
}
-int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
- dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
- __func__, dma_addr, size);
- return (dev->bus == &pci_bus_type) &&
- ((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
-}
-
int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
{
it8152_io.start = IT8152_IO_BASE + 0x12000;
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5PV210=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDKC110=y
-CONFIG_VMSPLIT_2G=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRC_CCITT=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_S5PV210=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_DEV_FB=y
+CONFIG_S5PV210_SETUP_FB_24BPP=y
+CONFIG_MACH_AQUILA=y
+CONFIG_MACH_GONI=y
+CONFIG_MACH_SMDKC110=y
CONFIG_MACH_SMDKV210=y
CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT=y
include include/asm-generic/Kbuild.asm
-unifdef-y += hwcap.h
+header-y += hwcap.h
* cache before the transfer is done, causing old data to be seen by
* the CPU.
*/
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
/*
* With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
return 0;
}
-static inline int dma_get_cache_alignment(void)
-{
- return 32;
-}
-
-static inline int dma_is_consistent(struct device *dev, dma_addr_t handle)
-{
- return !!arch_is_coherent();
-}
-
/*
* DMA errors are defined by all-bits-set in the DMA address.
*/
* DMA access and 1 if the buffer needs to be bounced.
*
*/
+#ifdef CONFIG_SA1111
extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
+#else
+static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr,
+ size_t size)
+{
+ return 0;
+}
+#endif
/*
* The DMA API, implemented by dmabounce.c. See below for descriptions.
#define R_ARM_THM_CALL 10
#define R_ARM_THM_JUMP24 30
+#define R_ARM_THM_MOVW_ABS_NC 47
+#define R_ARM_THM_MOVT_ABS 48
/*
* These are used to set parameters in the core dumps.
/* CoreSight Component Registers */
#define CSCR_CLASS 0xff4
-#define CSCR_PRSR 0x314
-
#define UNLOCK_MAGIC 0xc5acce55
/* ETM control register, "ETM Architecture", 3.3.1 */
ETMCTRL_BRANCH_OUTPUT | \
ETMCTRL_DO_CONTEXTID)
+/* ETM management registers, "ETM Architecture", 3.5.24 */
+#define ETMMR_OSLAR 0x300
+#define ETMMR_OSLSR 0x304
+#define ETMMR_OSSRR 0x308
+#define ETMMR_PDSR 0x314
+
/* ETB registers, "CoreSight Components TRM", 9.3 */
#define ETBR_DEPTH 0x04
#define ETBR_STATUS 0x0c
/* Per channel configuration registers */
-#define PL008_Cx_STRIDE (0x20)
+#define PL080_Cx_STRIDE (0x20)
#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
#define PL080_CONTROL_PROT_MASK (0x7 << 28)
#define PL080_CONTROL_PROT_SHIFT (28)
+#define PL080_CONTROL_PROT_CACHE (1 << 30)
+#define PL080_CONTROL_PROT_BUFF (1 << 29)
#define PL080_CONTROL_PROT_SYS (1 << 28)
#define PL080_CONTROL_DST_INCR (1 << 27)
#define PL080_CONTROL_SRC_INCR (1 << 26)
#define SCOOP_GPWR 0x24
#define SCOOP_GPRR 0x28
-#define SCOOP_GPCR_PA22 ( 1 << 12 )
-#define SCOOP_GPCR_PA21 ( 1 << 11 )
-#define SCOOP_GPCR_PA20 ( 1 << 10 )
-#define SCOOP_GPCR_PA19 ( 1 << 9 )
-#define SCOOP_GPCR_PA18 ( 1 << 8 )
-#define SCOOP_GPCR_PA17 ( 1 << 7 )
-#define SCOOP_GPCR_PA16 ( 1 << 6 )
-#define SCOOP_GPCR_PA15 ( 1 << 5 )
-#define SCOOP_GPCR_PA14 ( 1 << 4 )
-#define SCOOP_GPCR_PA13 ( 1 << 3 )
-#define SCOOP_GPCR_PA12 ( 1 << 2 )
-#define SCOOP_GPCR_PA11 ( 1 << 1 )
+#define SCOOP_CPR_OUT (1 << 7)
+#define SCOOP_CPR_SD_3V (1 << 2)
+#define SCOOP_CPR_CF_XV (1 << 1)
+#define SCOOP_CPR_CF_3V (1 << 0)
+
+#define SCOOP_GPCR_PA22 (1 << 12)
+#define SCOOP_GPCR_PA21 (1 << 11)
+#define SCOOP_GPCR_PA20 (1 << 10)
+#define SCOOP_GPCR_PA19 (1 << 9)
+#define SCOOP_GPCR_PA18 (1 << 8)
+#define SCOOP_GPCR_PA17 (1 << 7)
+#define SCOOP_GPCR_PA16 (1 << 6)
+#define SCOOP_GPCR_PA15 (1 << 5)
+#define SCOOP_GPCR_PA14 (1 << 4)
+#define SCOOP_GPCR_PA13 (1 << 3)
+#define SCOOP_GPCR_PA12 (1 << 2)
+#define SCOOP_GPCR_PA11 (1 << 1)
struct scoop_config {
unsigned short io_out;
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
*/
static inline int valid_user_regs(struct pt_regs *regs)
{
- if (user_mode(regs) && (regs->ARM_cpsr & PSR_I_BIT) == 0) {
- regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT);
- return 1;
+ unsigned long mode = regs->ARM_cpsr & MODE_MASK;
+
+ /*
+ * Always clear the F (FIQ) and A (delayed abort) bits
+ */
+ regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT);
+
+ if ((regs->ARM_cpsr & PSR_I_BIT) == 0) {
+ if (mode == USR_MODE)
+ return 1;
+ if (elf_hwcap & HWCAP_26BIT && mode == USR26_MODE)
+ return 1;
}
/*
* Force CPSR to something logical...
*/
- regs->ARM_cpsr &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | PSR_T_BIT | MODE32_BIT;
+ regs->ARM_cpsr &= PSR_f | PSR_s | PSR_x | PSR_T_BIT | MODE32_BIT;
if (!(elf_hwcap & HWCAP_26BIT))
regs->ARM_cpsr |= USR_MODE;
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
if (tlb_flag(TLB_V6_I_ASID))
asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
if (tlb_flag(TLB_V7_UIS_ASID))
+#ifdef CONFIG_ARM_ERRATA_720789
+ asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
+#else
asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
+#endif
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
if (tlb_flag(TLB_V7_UIS_PAGE))
+#ifdef CONFIG_ARM_ERRATA_720789
+ asm("mcr p15, 0, %0, c8, c3, 3" : : "r" (uaddr & PAGE_MASK) : "cc");
+#else
asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
+#endif
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363)
#define __NR_perf_event_open (__NR_SYSCALL_BASE+364)
#define __NR_recvmmsg (__NR_SYSCALL_BASE+365)
+#define __NR_accept4 (__NR_SYSCALL_BASE+366)
/*
* The following SWIs are ARM private.
CALL(sys_rt_tgsigqueueinfo)
CALL(sys_perf_event_open)
/* 365 */ CALL(sys_recvmmsg)
+ CALL(sys_accept4)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
#define CALL(x) .long x
#ifdef CONFIG_FUNCTION_TRACER
+/*
+ * When compiling with -pg, gcc inserts a call to the mcount routine at the
+ * start of every function. In mcount, apart from the function's address (in
+ * lr), we need to get hold of the function's caller's address.
+ *
+ * Older GCCs (pre-4.4) inserted a call to a routine called mcount like this:
+ *
+ * bl mcount
+ *
+ * These versions have the limitation that in order for the mcount routine to
+ * be able to determine the function's caller's address, an APCS-style frame
+ * pointer (which is set up with something like the code below) is required.
+ *
+ * mov ip, sp
+ * push {fp, ip, lr, pc}
+ * sub fp, ip, #4
+ *
+ * With EABI, these frame pointers are not available unless -mapcs-frame is
+ * specified, and if building as Thumb-2, not even then.
+ *
+ * Newer GCCs (4.4+) solve this problem by introducing a new version of mcount,
+ * with call sites like:
+ *
+ * push {lr}
+ * bl __gnu_mcount_nc
+ *
+ * With these compilers, frame pointers are not necessary.
+ *
+ * mcount can be thought of as a function called in the middle of a subroutine
+ * call. As such, it needs to be transparent for both the caller and the
+ * callee: the original lr needs to be restored when leaving mcount, and no
+ * registers should be clobbered. (In the __gnu_mcount_nc implementation, we
+ * clobber the ip register. This is OK because the ARM calling convention
+ * allows it to be clobbered in subroutines and doesn't use it to hold
+ * parameters.)
+ */
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(mcount)
- stmdb sp!, {r0-r3, lr}
- mov r0, lr
- sub r0, r0, #MCOUNT_INSN_SIZE
+ stmdb sp!, {r0-r3, lr}
+ mov r0, lr
+ sub r0, r0, #MCOUNT_INSN_SIZE
.globl mcount_call
mcount_call:
- bl ftrace_stub
- ldr lr, [fp, #-4] @ restore lr
- ldmia sp!, {r0-r3, pc}
+ bl ftrace_stub
+ ldr lr, [fp, #-4] @ restore lr
+ ldmia sp!, {r0-r3, pc}
ENTRY(ftrace_caller)
- stmdb sp!, {r0-r3, lr}
- ldr r1, [fp, #-4]
- mov r0, lr
- sub r0, r0, #MCOUNT_INSN_SIZE
+ stmdb sp!, {r0-r3, lr}
+ ldr r1, [fp, #-4]
+ mov r0, lr
+ sub r0, r0, #MCOUNT_INSN_SIZE
.globl ftrace_call
ftrace_call:
- bl ftrace_stub
- ldr lr, [fp, #-4] @ restore lr
- ldmia sp!, {r0-r3, pc}
+ bl ftrace_stub
+ ldr lr, [fp, #-4] @ restore lr
+ ldmia sp!, {r0-r3, pc}
#else
ENTRY(__gnu_mcount_nc)
- stmdb sp!, {r0-r3, lr}
- ldr r0, =ftrace_trace_function
- ldr r2, [r0]
- adr r0, ftrace_stub
- cmp r0, r2
- bne gnu_trace
- ldmia sp!, {r0-r3, ip, lr}
- mov pc, ip
+ stmdb sp!, {r0-r3, lr}
+ ldr r0, =ftrace_trace_function
+ ldr r2, [r0]
+ adr r0, ftrace_stub
+ cmp r0, r2
+ bne gnu_trace
+ ldmia sp!, {r0-r3, ip, lr}
+ mov pc, ip
gnu_trace:
- ldr r1, [sp, #20] @ lr of instrumented routine
- mov r0, lr
- sub r0, r0, #MCOUNT_INSN_SIZE
- mov lr, pc
- mov pc, r2
- ldmia sp!, {r0-r3, ip, lr}
- mov pc, ip
+ ldr r1, [sp, #20] @ lr of instrumented routine
+ mov r0, lr
+ sub r0, r0, #MCOUNT_INSN_SIZE
+ mov lr, pc
+ mov pc, r2
+ ldmia sp!, {r0-r3, ip, lr}
+ mov pc, ip
ENTRY(mcount)
- stmdb sp!, {r0-r3, lr}
- ldr r0, =ftrace_trace_function
- ldr r2, [r0]
- adr r0, ftrace_stub
- cmp r0, r2
- bne trace
- ldr lr, [fp, #-4] @ restore lr
- ldmia sp!, {r0-r3, pc}
+ stmdb sp!, {r0-r3, lr}
+ ldr r0, =ftrace_trace_function
+ ldr r2, [r0]
+ adr r0, ftrace_stub
+ cmp r0, r2
+ bne trace
+ ldr lr, [fp, #-4] @ restore lr
+ ldmia sp!, {r0-r3, pc}
trace:
- ldr r1, [fp, #-4] @ lr of instrumented routine
- mov r0, lr
- sub r0, r0, #MCOUNT_INSN_SIZE
- mov lr, pc
- mov pc, r2
- ldr lr, [fp, #-4] @ restore lr
- ldmia sp!, {r0-r3, pc}
+ ldr r1, [fp, #-4] @ lr of instrumented routine
+ mov r0, lr
+ sub r0, r0, #MCOUNT_INSN_SIZE
+ mov lr, pc
+ mov pc, r2
+ ldr lr, [fp, #-4] @ restore lr
+ ldmia sp!, {r0-r3, pc}
#endif /* CONFIG_DYNAMIC_FTRACE */
.globl ftrace_stub
ftrace_stub:
- mov pc, lr
+ mov pc, lr
#endif /* CONFIG_FUNCTION_TRACER */
t->etm_portsz = 1;
etm_unlock(t);
- ret = etm_readl(t, CSCR_PRSR);
+ (void)etm_readl(t, ETMMR_PDSR);
+ /* dummy first read */
+ (void)etm_readl(&tracer, ETMMR_OSSRR);
t->ncmppairs = etm_readl(t, ETMR_CONFCODE) & 0xf;
etm_writel(t, 0x440, ETMR_CTRL);
return;
/* Initialize to zero */
- for (regno = 0; regno < GDB_MAX_REGS; regno++)
+ for (regno = 0; regno < DBG_MAX_REG_NUM; regno++)
gdb_regs[regno] = 0;
/* Otherwise, we have only some registers from switch_to() */
unsigned long loc;
Elf32_Sym *sym;
s32 offset;
+#ifdef CONFIG_THUMB2_KERNEL
u32 upper, lower, sign, j1, j2;
+#endif
offset = ELF32_R_SYM(rel->r_info);
if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
(offset & 0x0fff);
break;
+#ifdef CONFIG_THUMB2_KERNEL
case R_ARM_THM_CALL:
case R_ARM_THM_JUMP24:
upper = *(u16 *)loc;
*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
(j1 << 13) | (j2 << 11) |
((offset >> 1) & 0x07ff));
+ break;
+
+ case R_ARM_THM_MOVW_ABS_NC:
+ case R_ARM_THM_MOVT_ABS:
upper = *(u16 *)loc;
lower = *(u16 *)(loc + 2);
+
+ /*
+ * MOVT/MOVW instructions encoding in Thumb-2:
+ *
+ * i = upper[10]
+ * imm4 = upper[3:0]
+ * imm3 = lower[14:12]
+ * imm8 = lower[7:0]
+ *
+ * imm16 = imm4:i:imm3:imm8
+ */
+ offset = ((upper & 0x000f) << 12) |
+ ((upper & 0x0400) << 1) |
+ ((lower & 0x7000) >> 4) | (lower & 0x00ff);
+ offset = (offset ^ 0x8000) - 0x8000;
+ offset += sym->st_value;
+
+ if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS)
+ offset >>= 16;
+
+ *(u16 *)loc = (u16)((upper & 0xfbf0) |
+ ((offset & 0xf000) >> 12) |
+ ((offset & 0x0800) >> 1));
+ *(u16 *)(loc + 2) = (u16)((lower & 0x8f00) |
+ ((offset & 0x0700) << 4) |
+ (offset & 0x00ff));
break;
+#endif
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
/* sys_execve() executes a new program.
* This is called indirectly via a small wrapper
*/
-asmlinkage int sys_execve(char __user *filenamei, char __user * __user *argv,
- char __user * __user *envp, struct pt_regs *regs)
+asmlinkage int sys_execve(const char __user *filenamei,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp, struct pt_regs *regs)
{
int error;
char * filename;
return error;
}
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
struct pt_regs regs;
int ret;
memset(®s, 0, sizeof(struct pt_regs));
- ret = do_execve((char *)filename, (char __user * __user *)argv,
- (char __user * __user *)envp, ®s);
+ ret = do_execve(filename,
+ (const char __user *const __user *)argv,
+ (const char __user *const __user *)envp, ®s);
if (ret < 0)
goto out;
return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
}
-asmlinkage long sys_oabi_stat64(char __user * filename,
+asmlinkage long sys_oabi_stat64(const char __user * filename,
struct oldabi_stat64 __user * statbuf)
{
struct kstat stat;
return error;
}
-asmlinkage long sys_oabi_lstat64(char __user * filename,
+asmlinkage long sys_oabi_lstat64(const char __user * filename,
struct oldabi_stat64 __user * statbuf)
{
struct kstat stat;
}
asmlinkage long sys_oabi_fstatat64(int dfd,
- char __user *filename,
+ const char __user *filename,
struct oldabi_stat64 __user *statbuf,
int flag)
{
* SPI devices.
*/
#if defined(CONFIG_MTD_DATAFLASH)
-static struct mtd_partition __initdata cam60_spi_partitions[] = {
+static struct mtd_partition cam60_spi_partitions[] = {
{
.name = "BOOT1",
.offset = 0,
},
};
-static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
+static struct flash_platform_data cam60_spi_flash_platform_data = {
.name = "spi_flash",
.parts = cam60_spi_partitions,
.nr_parts = ARRAY_SIZE(cam60_spi_partitions)
};
#endif
-static struct spi_board_info cam60_spi_devices[] = {
+static struct spi_board_info cam60_spi_devices[] __initdata = {
#if defined(CONFIG_MTD_DATAFLASH)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
#define SYSPLD_VIRT_BASE 0xfe000000
#define SYSPLD_BASE SYSPLD_VIRT_BASE
-#ifndef __ASSEMBLER__
-
-#define PCIO_BASE IO_BASE
-
-#endif
-
-
#if defined (CONFIG_ARCH_AUTCPU12)
#define CS89712_VIRT_BASE CLPS7111_VIRT_BASE
menu "Cortina Systems Gemini Implementations"
+config MACH_NAS4220B
+ bool "Raidsonic NAS-4220-B"
+ select GEMINI_MEM_SWAP
+ help
+ Say Y here if you intend to run this kernel on a
+ Raidsonic NAS-4220-B.
+
config MACH_RUT100
bool "Teltonika RUT100"
select GEMINI_MEM_SWAP
Say Y here if you intend to run this kernel on a
Teltonika 3G Router RUT100.
+config MACH_WBD111
+ bool "Wiliboard WBD-111"
+ select GEMINI_MEM_SWAP
+ help
+ Say Y here if you intend to run this kernel on a
+ Wiliboard WBD-111.
+
+config MACH_WBD222
+ bool "Wiliboard WBD-222"
+ select GEMINI_MEM_SWAP
+ help
+ Say Y here if you intend to run this kernel on a
+ Wiliboard WBD-222.
+
endmenu
config GEMINI_MEM_SWAP
obj-y := irq.o mm.o time.o devices.o gpio.o
# Board-specific support
+obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
+obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
+obj-$(CONFIG_MACH_WBD222) += board-wbd222.o
--- /dev/null
+/*
+ * Support for Raidsonic NAS-4220-B
+ *
+ * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ *
+ * based on rut1xx.c
+ * Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/mdio-gpio.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/global_reg.h>
+
+#include "common.h"
+
+static struct sys_timer ib4220b_timer = {
+ .init = gemini_timer_init,
+};
+
+static struct gpio_led ib4220b_leds[] = {
+ {
+ .name = "nas4220b:orange:hdd",
+ .default_trigger = "none",
+ .gpio = 60,
+ },
+ {
+ .name = "nas4220b:green:os",
+ .default_trigger = "heartbeat",
+ .gpio = 62,
+ },
+};
+
+static struct gpio_led_platform_data ib4220b_leds_data = {
+ .num_leds = ARRAY_SIZE(ib4220b_leds),
+ .leds = ib4220b_leds,
+};
+
+static struct platform_device ib4220b_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ib4220b_leds_data,
+ },
+};
+
+static struct gpio_keys_button ib4220b_keys[] = {
+ {
+ .code = KEY_SETUP,
+ .gpio = 61,
+ .active_low = 1,
+ .desc = "Backup Button",
+ .type = EV_KEY,
+ },
+ {
+ .code = KEY_RESTART,
+ .gpio = 63,
+ .active_low = 1,
+ .desc = "Softreset Button",
+ .type = EV_KEY,
+ },
+};
+
+static struct gpio_keys_platform_data ib4220b_keys_data = {
+ .buttons = ib4220b_keys,
+ .nbuttons = ARRAY_SIZE(ib4220b_keys),
+};
+
+static struct platform_device ib4220b_key_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &ib4220b_keys_data,
+ },
+};
+
+static void __init ib4220b_init(void)
+{
+ gemini_gpio_init();
+ platform_register_uart();
+ platform_register_pflash(SZ_16M, NULL, 0);
+ platform_device_register(&ib4220b_led_device);
+ platform_device_register(&ib4220b_key_device);
+}
+
+MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
+ .phys_io = 0x7fffc000,
+ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
+ .boot_params = 0x100,
+ .map_io = gemini_map_io,
+ .init_irq = gemini_init_irq,
+ .timer = &ib4220b_timer,
+ .init_machine = ib4220b_init,
+MACHINE_END
--- /dev/null
+/*
+ * Support for Wiliboard WBD-111
+ *
+ * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/skbuff.h>
+#include <linux/gpio_keys.h>
+#include <linux/mdio-gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+
+#include "common.h"
+
+static struct gpio_keys_button wbd111_keys[] = {
+ {
+ .code = KEY_SETUP,
+ .gpio = 5,
+ .active_low = 1,
+ .desc = "reset",
+ .type = EV_KEY,
+ },
+};
+
+static struct gpio_keys_platform_data wbd111_keys_data = {
+ .buttons = wbd111_keys,
+ .nbuttons = ARRAY_SIZE(wbd111_keys),
+};
+
+static struct platform_device wbd111_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &wbd111_keys_data,
+ },
+};
+
+static struct gpio_led wbd111_leds[] = {
+ {
+ .name = "L3red",
+ .gpio = 1,
+ },
+ {
+ .name = "L4green",
+ .gpio = 2,
+ },
+ {
+ .name = "L4red",
+ .gpio = 3,
+ },
+ {
+ .name = "L3green",
+ .gpio = 5,
+ },
+};
+
+static struct gpio_led_platform_data wbd111_leds_data = {
+ .num_leds = ARRAY_SIZE(wbd111_leds),
+ .leds = wbd111_leds,
+};
+
+static struct platform_device wbd111_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wbd111_leds_data,
+ },
+};
+
+static struct sys_timer wbd111_timer = {
+ .init = gemini_timer_init,
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wbd111_partitions[] = {
+ {
+ .name = "RedBoot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x100000,
+ } , {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x6a0000,
+ } , {
+ .name = "VCTL",
+ .offset = 0x7c0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "cfg",
+ .offset = 0x7d0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "FIS",
+ .offset = 0x7e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions)
+#else
+#define wbd111_partitions NULL
+#define wbd111_num_partitions 0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static void __init wbd111_init(void)
+{
+ gemini_gpio_init();
+ platform_register_uart();
+ platform_register_pflash(SZ_8M, wbd111_partitions,
+ wbd111_num_partitions);
+ platform_device_register(&wbd111_leds_device);
+ platform_device_register(&wbd111_keys_device);
+}
+
+MACHINE_START(WBD111, "Wiliboard WBD-111")
+ .phys_io = 0x7fffc000,
+ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
+ .boot_params = 0x100,
+ .map_io = gemini_map_io,
+ .init_irq = gemini_init_irq,
+ .timer = &wbd111_timer,
+ .init_machine = wbd111_init,
+MACHINE_END
--- /dev/null
+/*
+ * Support for Wiliboard WBD-222
+ *
+ * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/skbuff.h>
+#include <linux/gpio_keys.h>
+#include <linux/mdio-gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+
+#include "common.h"
+
+static struct gpio_keys_button wbd222_keys[] = {
+ {
+ .code = KEY_SETUP,
+ .gpio = 5,
+ .active_low = 1,
+ .desc = "reset",
+ .type = EV_KEY,
+ },
+};
+
+static struct gpio_keys_platform_data wbd222_keys_data = {
+ .buttons = wbd222_keys,
+ .nbuttons = ARRAY_SIZE(wbd222_keys),
+};
+
+static struct platform_device wbd222_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &wbd222_keys_data,
+ },
+};
+
+static struct gpio_led wbd222_leds[] = {
+ {
+ .name = "L3red",
+ .gpio = 1,
+ },
+ {
+ .name = "L4green",
+ .gpio = 2,
+ },
+ {
+ .name = "L4red",
+ .gpio = 3,
+ },
+ {
+ .name = "L3green",
+ .gpio = 5,
+ },
+};
+
+static struct gpio_led_platform_data wbd222_leds_data = {
+ .num_leds = ARRAY_SIZE(wbd222_leds),
+ .leds = wbd222_leds,
+};
+
+static struct platform_device wbd222_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wbd222_leds_data,
+ },
+};
+
+static struct sys_timer wbd222_timer = {
+ .init = gemini_timer_init,
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wbd222_partitions[] = {
+ {
+ .name = "RedBoot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x100000,
+ } , {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x6a0000,
+ } , {
+ .name = "VCTL",
+ .offset = 0x7c0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "cfg",
+ .offset = 0x7d0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "FIS",
+ .offset = 0x7e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions)
+#else
+#define wbd222_partitions NULL
+#define wbd222_num_partitions 0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static void __init wbd222_init(void)
+{
+ gemini_gpio_init();
+ platform_register_uart();
+ platform_register_pflash(SZ_8M, wbd222_partitions,
+ wbd222_num_partitions);
+ platform_device_register(&wbd222_leds_device);
+ platform_device_register(&wbd222_keys_device);
+}
+
+MACHINE_START(WBD222, "Wiliboard WBD-222")
+ .phys_io = 0x7fffc000,
+ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
+ .boot_params = 0x100,
+ .map_io = gemini_map_io,
+ .init_irq = gemini_init_irq,
+ .timer = &wbd222_timer,
+ .init_machine = wbd222_init,
+MACHINE_END
#define SERIAL_ENABLE_EN (1<<0)
/* General defines to pacify gcc */
-#define PCIO_BASE (0) /* for inb, outb and friends */
-#define PCIO_VIRT PCIO_BASE
#define __ASM_ARCH_HARDWARE_INCMACH_H
#include "boards.h"
mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
spi_register_board_info(pca100_spi_board_info,
ARRAY_SIZE(pca100_spi_board_info));
- imx27_add_spi_imx0(&pca100_spi_0_data);
+ imx27_add_spi_imx0(&pca100_spi0_data);
#endif
gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
#define IO_SIZE 0x0B000000 // How much?
#define IO_START INTEGRATOR_HDR_BASE // PA of IO
-#define PCIO_BASE PCI_IO_VADDR
#define PCIMEM_BASE PCI_MEMORY_VADDR
#define pcibios_assign_all_busses() 1
#define __ASM_ARCH_HARDWARE_H
/* PCI IO info */
-#define PCIO_BASE IXP23XX_PCI_IO_VIRT
#define PCIBIOS_MIN_IO 0x00000000
#define PCIBIOS_MIN_MEM 0xe0000000
FSG-3 device. For more information on this platform,
see http://www.nslu2-linux.org/wiki/FSG3/HomePage
+config MACH_ARCOM_VULCAN
+ bool
+ prompt "Arcom/Eurotech Vulcan"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Arcom's
+ Vulcan board.
+
#
# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
#
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
+obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
obj-y += common.o
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
+obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
moveq \rx, #0xc8000000
movne \rx, #0xff000000
orrne \rx, \rx, #0x00b00000
+#ifdef __ARMEB__
add \rx,\rx,#3 @ Uart regs are at off set of 3 if
@ byte writes used - Big Endian.
+#endif
.endm
#define UART_SHIFT 2
return (unsigned int)inb(port & PIO_MASK);
else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return (unsigned int)__raw_readb(port);
+ return (unsigned int)__raw_readb(addr);
#else
return (unsigned int)__indirect_readb(addr);
#endif
return (unsigned int)inw(port & PIO_MASK);
else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le16_to_cpu(__raw_readw((u32)port));
+ return le16_to_cpu((__force __le16)__raw_readw(addr));
#else
return (unsigned int)__indirect_readw(addr);
#endif
outb(value, port & PIO_MASK);
else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writeb(value, port);
+ __raw_writeb(value, addr);
#else
__indirect_writeb(value, addr);
#endif
static struct platform_nand_data ixdp425_flash_nand_data = {
.chip = {
+ .nr_chips = 1,
.chip_delay = 30,
.options = NAND_NO_AUTOINCR,
#ifdef CONFIG_MTD_PARTITIONS
--- /dev/null
+/*
+ * arch/arch/mach-ixp4xx/vulcan-pci.c
+ *
+ * Vulcan board-level PCI initialization
+ *
+ * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org>
+ *
+ * based on ixdp425-pci.c:
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA 2
+#define INTB 3
+
+void __init vulcan_pci_preinit(void)
+{
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ /*
+ * Cardbus bridge wants way more than the SoC can actually offer,
+ * and leaves the whole PCI bus in a mess. Artificially limit it
+ * to 8MB per region. Of course indirect mode doesn't have this
+ * limitation...
+ */
+ pci_cardbus_mem_size = SZ_8M;
+ pr_info("Vulcan PCI: limiting CardBus memory size to %dMB\n",
+ (int)(pci_cardbus_mem_size >> 20));
+#endif
+ set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+ set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+ ixp4xx_pci_preinit();
+}
+
+static int __init vulcan_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (slot == 1)
+ return IXP4XX_GPIO_IRQ(INTA);
+
+ if (slot == 2)
+ return IXP4XX_GPIO_IRQ(INTB);
+
+ return -1;
+}
+
+struct hw_pci vulcan_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = vulcan_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = vulcan_map_irq,
+};
+
+int __init vulcan_pci_init(void)
+{
+ if (machine_is_arcom_vulcan())
+ pci_common_init(&vulcan_pci);
+ return 0;
+}
+
+subsys_initcall(vulcan_pci_init);
--- /dev/null
+/*
+ * arch/arm/mach-ixp4xx/vulcan-setup.c
+ *
+ * Arcom/Eurotech Vulcan board-setup
+ *
+ * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org>
+ *
+ * based on fsg-setup.c:
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
+ */
+
+#include <linux/if_ether.h>
+#include <linux/irq.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/io.h>
+#include <linux/w1-gpio.h>
+#include <linux/mtd/plat-ram.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data vulcan_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource vulcan_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device vulcan_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &vulcan_flash_data,
+ },
+ .resource = &vulcan_flash_resource,
+ .num_resources = 1,
+};
+
+static struct platdata_mtd_ram vulcan_sram_data = {
+ .mapname = "Vulcan SRAM",
+ .bankwidth = 1,
+};
+
+static struct resource vulcan_sram_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device vulcan_sram = {
+ .name = "mtd-ram",
+ .id = 0,
+ .dev = {
+ .platform_data = &vulcan_sram_data,
+ },
+ .resource = &vulcan_sram_resource,
+ .num_resources = 1,
+};
+
+static struct resource vulcan_uart_resources[] = {
+ [0] = {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct plat_serial8250_port vulcan_uart_data[] = {
+ [0] = {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ [1] = {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ [2] = {
+ .irq = IXP4XX_GPIO_IRQ(4),
+ .irqflags = IRQF_TRIGGER_LOW,
+ .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .uartclk = 1843200,
+ },
+ [3] = {
+ .irq = IXP4XX_GPIO_IRQ(4),
+ .irqflags = IRQF_TRIGGER_LOW,
+ .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .uartclk = 1843200,
+ },
+ { }
+};
+
+static struct platform_device vulcan_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = vulcan_uart_data,
+ },
+ .resource = vulcan_uart_resources,
+ .num_resources = ARRAY_SIZE(vulcan_uart_resources),
+};
+
+static struct eth_plat_info vulcan_plat_eth[] = {
+ [0] = {
+ .phy = 0,
+ .rxq = 3,
+ .txreadyq = 20,
+ },
+ [1] = {
+ .phy = 1,
+ .rxq = 4,
+ .txreadyq = 21,
+ },
+};
+
+static struct platform_device vulcan_eth[] = {
+ [0] = {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev = {
+ .platform_data = &vulcan_plat_eth[0],
+ },
+ },
+ [1] = {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEC,
+ .dev = {
+ .platform_data = &vulcan_plat_eth[1],
+ },
+ },
+};
+
+static struct resource vulcan_max6369_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device vulcan_max6369 = {
+ .name = "max6369_wdt",
+ .id = -1,
+ .resource = &vulcan_max6369_resource,
+ .num_resources = 1,
+};
+
+static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
+ .pin = 14,
+};
+
+static struct platform_device vulcan_w1_gpio = {
+ .name = "w1-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &vulcan_w1_gpio_pdata,
+ },
+};
+
+static struct platform_device *vulcan_devices[] __initdata = {
+ &vulcan_uart,
+ &vulcan_flash,
+ &vulcan_sram,
+ &vulcan_max6369,
+ &vulcan_eth[0],
+ &vulcan_eth[1],
+ &vulcan_w1_gpio,
+};
+
+static void __init vulcan_init(void)
+{
+ ixp4xx_sys_init();
+
+ /* Flash is spread over both CS0 and CS1 */
+ vulcan_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ vulcan_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+ *IXP4XX_EXP_CS0 = IXP4XX_EXP_BUS_CS_EN |
+ IXP4XX_EXP_BUS_STROBE_T(3) |
+ IXP4XX_EXP_BUS_SIZE(0xF) |
+ IXP4XX_EXP_BUS_BYTE_RD16 |
+ IXP4XX_EXP_BUS_WR_EN;
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+ /* SRAM on CS2, (256kB, 8bit, writable) */
+ vulcan_sram_resource.start = IXP4XX_EXP_BUS_BASE(2);
+ vulcan_sram_resource.end = IXP4XX_EXP_BUS_BASE(2) + SZ_256K - 1;
+ *IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_CS_EN |
+ IXP4XX_EXP_BUS_STROBE_T(1) |
+ IXP4XX_EXP_BUS_HOLD_T(2) |
+ IXP4XX_EXP_BUS_SIZE(9) |
+ IXP4XX_EXP_BUS_SPLT_EN |
+ IXP4XX_EXP_BUS_WR_EN |
+ IXP4XX_EXP_BUS_BYTE_EN;
+
+ /* XR16L2551 on CS3 (Moto style, 512 bytes, 8bits, writable) */
+ vulcan_uart_resources[2].start = IXP4XX_EXP_BUS_BASE(3);
+ vulcan_uart_resources[2].end = IXP4XX_EXP_BUS_BASE(3) + 16 - 1;
+ vulcan_uart_data[2].mapbase = vulcan_uart_resources[2].start;
+ vulcan_uart_data[3].mapbase = vulcan_uart_data[2].mapbase + 8;
+ *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
+ IXP4XX_EXP_BUS_STROBE_T(3) |
+ IXP4XX_EXP_BUS_CYCLES(IXP4XX_EXP_BUS_CYCLES_MOTOROLA)|
+ IXP4XX_EXP_BUS_WR_EN |
+ IXP4XX_EXP_BUS_BYTE_EN;
+
+ /* GPIOS on CS4 (512 bytes, 8bits, writable) */
+ *IXP4XX_EXP_CS4 = IXP4XX_EXP_BUS_CS_EN |
+ IXP4XX_EXP_BUS_WR_EN |
+ IXP4XX_EXP_BUS_BYTE_EN;
+
+ /* max6369 on CS5 (512 bytes, 8bits, writable) */
+ vulcan_max6369_resource.start = IXP4XX_EXP_BUS_BASE(5);
+ vulcan_max6369_resource.end = IXP4XX_EXP_BUS_BASE(5);
+ *IXP4XX_EXP_CS5 = IXP4XX_EXP_BUS_CS_EN |
+ IXP4XX_EXP_BUS_WR_EN |
+ IXP4XX_EXP_BUS_BYTE_EN;
+
+ platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices));
+}
+
+MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
+ /* Maintainer: Marc Zyngier <maz@misterjones.org> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = vulcan_init,
+MACHINE_END
MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = avengers_lite_init,
},
};
-void __init pxa_map_io(void)
+void __init mmp_map_io(void)
{
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
}
struct sys_timer;
extern void timer_init(int irq);
-extern void mmp2_clear_pmic_int(void);
-
-extern struct sys_timer pxa168_timer;
-extern struct sys_timer pxa910_timer;
-extern struct sys_timer mmp2_timer;
-extern void __init pxa168_init_irq(void);
-extern void __init pxa910_init_irq(void);
-extern void __init mmp2_init_icu(void);
-extern void __init mmp2_init_irq(void);
extern void __init icu_init_irq(void);
-extern void __init pxa_map_io(void);
+extern void __init mmp_map_io(void);
MACHINE_START(FLINT, "Flint Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = flint_init,
+#ifndef __MACH_DEVICE_H
+#define __MACH_DEVICE_H
+
#include <linux/types.h>
#define MAX_RESOURCE_DMA 2
}
extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
+#endif /* __MACH_DEVICE_H */
#ifndef __ASM_MACH_MMP2_H
#define __ASM_MACH_MMP2_H
+struct sys_timer;
+
+extern struct sys_timer mmp2_timer;
+extern void __init mmp2_init_icu(void);
+extern void __init mmp2_init_irq(void);
+extern void mmp2_clear_pmic_int(void);
+
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
#ifndef __ASM_MACH_PXA168_H
#define __ASM_MACH_PXA168_H
+struct sys_timer;
+
+extern struct sys_timer pxa168_timer;
+extern void __init pxa168_init_irq(void);
+
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
#ifndef __ASM_MACH_PXA910_H
#define __ASM_MACH_PXA910_H
+struct sys_timer;
+
+extern struct sys_timer pxa910_timer;
+extern void __init pxa910_init_irq(void);
+
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
#include <linux/io.h>
#include <mach/regs-icu.h>
+#include <mach/mmp2.h>
#include "common.h"
MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = jasper_init,
#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/time.h>
#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/mfp.h>
#include <mach/gpio.h>
#include <mach/devices.h>
+#include <mach/mmp2.h>
#include "common.h"
#include "clock.h"
}
postcore_initcall(mmp2_init);
+static void __init mmp2_timer_init(void)
+{
+ unsigned long clk_rst;
+
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+
+ /*
+ * enable bus/functional clock, enable 6.5MHz (divider 4),
+ * release reset
+ */
+ clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
+ __raw_writel(clk_rst, APBC_MMP2_TIMERS);
+
+ timer_init(IRQ_MMP2_TIMER1);
+}
+
+struct sys_timer mmp2_timer = {
+ .init = mmp2_timer_init,
+};
+
/* on-chip devices */
MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = tavorevb_init,
clocksource_register(&cksrc);
clockevents_register_device(&ckevt);
}
-
-static void __init mmp2_timer_init(void)
-{
- unsigned long clk_rst;
-
- __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
-
- /*
- * enable bus/functional clock, enable 6.5MHz (divider 4),
- * release reset
- */
- clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
- __raw_writel(clk_rst, APBC_MMP2_TIMERS);
-
- timer_init(IRQ_MMP2_TIMER1);
-}
-
-struct sys_timer mmp2_timer = {
- .init = mmp2_timer_init,
-};
-
MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = ttc_dkb_init,
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o devices-msm7x00.o
+obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
*
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <linux/gpio.h>
#include "board-trout.h"
+static uint8_t trout_int_mask[2] = {
+ [0] = 0xff, /* mask all interrupts */
+ [1] = 0xff,
+};
+static uint8_t trout_sleep_int_mask[] = {
+ [0] = 0xff,
+ [1] = 0xff,
+};
+
struct msm_gpio_chip {
struct gpio_chip chip;
void __iomem *reg; /* Base of register bank */
TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0),
};
+static void trout_gpio_irq_ack(unsigned int irq)
+{
+ int bank = TROUT_INT_TO_BANK(irq);
+ uint8_t mask = TROUT_INT_TO_MASK(irq);
+ int reg = TROUT_BANK_TO_STAT_REG(bank);
+ /*printk(KERN_INFO "trout_gpio_irq_ack irq %d\n", irq);*/
+ writeb(mask, TROUT_CPLD_BASE + reg);
+}
+
+static void trout_gpio_irq_mask(unsigned int irq)
+{
+ unsigned long flags;
+ uint8_t reg_val;
+ int bank = TROUT_INT_TO_BANK(irq);
+ uint8_t mask = TROUT_INT_TO_MASK(irq);
+ int reg = TROUT_BANK_TO_MASK_REG(bank);
+
+ local_irq_save(flags);
+ reg_val = trout_int_mask[bank] |= mask;
+ /*printk(KERN_INFO "trout_gpio_irq_mask irq %d => %d:%02x\n",
+ irq, bank, reg_val);*/
+ writeb(reg_val, TROUT_CPLD_BASE + reg);
+ local_irq_restore(flags);
+}
+
+static void trout_gpio_irq_unmask(unsigned int irq)
+{
+ unsigned long flags;
+ uint8_t reg_val;
+ int bank = TROUT_INT_TO_BANK(irq);
+ uint8_t mask = TROUT_INT_TO_MASK(irq);
+ int reg = TROUT_BANK_TO_MASK_REG(bank);
+
+ local_irq_save(flags);
+ reg_val = trout_int_mask[bank] &= ~mask;
+ /*printk(KERN_INFO "trout_gpio_irq_unmask irq %d => %d:%02x\n",
+ irq, bank, reg_val);*/
+ writeb(reg_val, TROUT_CPLD_BASE + reg);
+ local_irq_restore(flags);
+}
+
+int trout_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+ unsigned long flags;
+ int bank = TROUT_INT_TO_BANK(irq);
+ uint8_t mask = TROUT_INT_TO_MASK(irq);
+
+ local_irq_save(flags);
+ if(on)
+ trout_sleep_int_mask[bank] &= ~mask;
+ else
+ trout_sleep_int_mask[bank] |= mask;
+ local_irq_restore(flags);
+ return 0;
+}
+
+static void trout_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int j, m;
+ unsigned v;
+ int bank;
+ int stat_reg;
+ int int_base = TROUT_INT_START;
+ uint8_t int_mask;
+
+ for (bank = 0; bank < 2; bank++) {
+ stat_reg = TROUT_BANK_TO_STAT_REG(bank);
+ v = readb(TROUT_CPLD_BASE + stat_reg);
+ int_mask = trout_int_mask[bank];
+ if (v & int_mask) {
+ writeb(v & int_mask, TROUT_CPLD_BASE + stat_reg);
+ printk(KERN_ERR "trout_gpio_irq_handler: got masked "
+ "interrupt: %d:%02x\n", bank, v & int_mask);
+ }
+ v &= ~int_mask;
+ while (v) {
+ m = v & -v;
+ j = fls(m) - 1;
+ /*printk(KERN_INFO "msm_gpio_irq_handler %d:%02x %02x b"
+ "it %d irq %d\n", bank, v, m, j, int_base + j);*/
+ v &= ~m;
+ generic_handle_irq(int_base + j);
+ }
+ int_base += TROUT_INT_BANK0_COUNT;
+ }
+ desc->chip->ack(irq);
+}
+
+static struct irq_chip trout_gpio_irq_chip = {
+ .name = "troutgpio",
+ .ack = trout_gpio_irq_ack,
+ .mask = trout_gpio_irq_mask,
+ .unmask = trout_gpio_irq_unmask,
+ .set_wake = trout_gpio_irq_set_wake,
+};
+
/*
* Called from the processor-specific init to enable GPIO pin support.
*/
int __init trout_init_gpio(void)
{
int i;
+ for(i = TROUT_INT_START; i <= TROUT_INT_END; i++) {
+ set_irq_chip(i, &trout_gpio_irq_chip);
+ set_irq_handler(i, handle_edge_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
gpiochip_add(&msm_gpio_banks[i].chip);
+ set_irq_type(MSM_GPIO_TO_INT(17), IRQF_TRIGGER_HIGH);
+ set_irq_chained_handler(MSM_GPIO_TO_INT(17), trout_gpio_irq_handler);
+ set_irq_wake(MSM_GPIO_TO_INT(17), 1);
+
return 0;
}
--- /dev/null
+/* linux/arch/arm/mach-msm/board-trout-mmc.c
+** Author: Brian Swetland <swetland@google.com>
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#include <mach/vreg.h>
+
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+#include "board-trout.h"
+
+#include "proc_comm.h"
+
+#define DEBUG_SDSLOT_VDD 1
+
+/* ---- COMMON ---- */
+static void config_gpio_table(uint32_t *table, int len)
+{
+ int n;
+ unsigned id;
+ for(n = 0; n < len; n++) {
+ id = table[n];
+ msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &id, 0);
+ }
+}
+
+/* ---- SDCARD ---- */
+
+static uint32_t sdcard_on_gpio_table[] = {
+ PCOM_GPIO_CFG(62, 2, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA), /* CLK */
+ PCOM_GPIO_CFG(63, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* CMD */
+ PCOM_GPIO_CFG(64, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT3 */
+ PCOM_GPIO_CFG(65, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT2 */
+ PCOM_GPIO_CFG(66, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT1 */
+ PCOM_GPIO_CFG(67, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT0 */
+};
+
+static uint32_t sdcard_off_gpio_table[] = {
+ PCOM_GPIO_CFG(62, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CLK */
+ PCOM_GPIO_CFG(63, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CMD */
+ PCOM_GPIO_CFG(64, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT3 */
+ PCOM_GPIO_CFG(65, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT2 */
+ PCOM_GPIO_CFG(66, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT1 */
+ PCOM_GPIO_CFG(67, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT0 */
+};
+
+static uint opt_disable_sdcard;
+
+static int __init trout_disablesdcard_setup(char *str)
+{
+ int cal = simple_strtol(str, NULL, 0);
+
+ opt_disable_sdcard = cal;
+ return 1;
+}
+
+__setup("board_trout.disable_sdcard=", trout_disablesdcard_setup);
+
+static struct vreg *vreg_sdslot; /* SD slot power */
+
+struct mmc_vdd_xlat {
+ int mask;
+ int level;
+};
+
+static struct mmc_vdd_xlat mmc_vdd_table[] = {
+ { MMC_VDD_165_195, 1800 },
+ { MMC_VDD_20_21, 2050 },
+ { MMC_VDD_21_22, 2150 },
+ { MMC_VDD_22_23, 2250 },
+ { MMC_VDD_23_24, 2350 },
+ { MMC_VDD_24_25, 2450 },
+ { MMC_VDD_25_26, 2550 },
+ { MMC_VDD_26_27, 2650 },
+ { MMC_VDD_27_28, 2750 },
+ { MMC_VDD_28_29, 2850 },
+ { MMC_VDD_29_30, 2950 },
+};
+
+static unsigned int sdslot_vdd = 0xffffffff;
+static unsigned int sdslot_vreg_enabled;
+
+static uint32_t trout_sdslot_switchvdd(struct device *dev, unsigned int vdd)
+{
+ int i, rc;
+
+ BUG_ON(!vreg_sdslot);
+
+ if (vdd == sdslot_vdd)
+ return 0;
+
+ sdslot_vdd = vdd;
+
+ if (vdd == 0) {
+#if DEBUG_SDSLOT_VDD
+ printk("%s: Disabling SD slot power\n", __func__);
+#endif
+ config_gpio_table(sdcard_off_gpio_table,
+ ARRAY_SIZE(sdcard_off_gpio_table));
+ vreg_disable(vreg_sdslot);
+ sdslot_vreg_enabled = 0;
+ return 0;
+ }
+
+ if (!sdslot_vreg_enabled) {
+ rc = vreg_enable(vreg_sdslot);
+ if (rc) {
+ printk(KERN_ERR "%s: Error enabling vreg (%d)\n",
+ __func__, rc);
+ }
+ config_gpio_table(sdcard_on_gpio_table,
+ ARRAY_SIZE(sdcard_on_gpio_table));
+ sdslot_vreg_enabled = 1;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) {
+ if (mmc_vdd_table[i].mask == (1 << vdd)) {
+#if DEBUG_SDSLOT_VDD
+ printk("%s: Setting level to %u\n",
+ __func__, mmc_vdd_table[i].level);
+#endif
+ rc = vreg_set_level(vreg_sdslot,
+ mmc_vdd_table[i].level);
+ if (rc) {
+ printk(KERN_ERR
+ "%s: Error setting vreg level (%d)\n",
+ __func__, rc);
+ }
+ return 0;
+ }
+ }
+
+ printk(KERN_ERR "%s: Invalid VDD %d specified\n", __func__, vdd);
+ return 0;
+}
+
+static unsigned int trout_sdslot_status(struct device *dev)
+{
+ unsigned int status;
+
+ status = (unsigned int) gpio_get_value(TROUT_GPIO_SDMC_CD_N);
+ return (!status);
+}
+
+#define TROUT_MMC_VDD MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 \
+ | MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 \
+ | MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 \
+ | MMC_VDD_28_29 | MMC_VDD_29_30
+
+static struct msm_mmc_platform_data trout_sdslot_data = {
+ .ocr_mask = TROUT_MMC_VDD,
+ .status = trout_sdslot_status,
+ .translate_vdd = trout_sdslot_switchvdd,
+};
+
+int __init trout_init_mmc(unsigned int sys_rev)
+{
+ sdslot_vreg_enabled = 0;
+
+ vreg_sdslot = vreg_get(0, "gp6");
+ if (IS_ERR(vreg_sdslot))
+ return PTR_ERR(vreg_sdslot);
+
+ set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1);
+
+ if (!opt_disable_sdcard)
+ msm_add_sdcc(2, &trout_sdslot_data,
+ TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 0);
+ else
+ printk(KERN_INFO "trout: SD-Card interface disabled\n");
+ return 0;
+}
+
#include "devices.h"
#include "board-trout.h"
+extern int trout_init_mmc(unsigned int);
+
static struct platform_device *devices[] __initdata = {
&msm_device_uart3,
&msm_device_smd,
static void __init trout_init(void)
{
+ int rc;
+
platform_add_devices(devices, ARRAY_SIZE(devices));
+
+#ifdef CONFIG_MMC
+ rc = trout_init_mmc(system_rev);
+ if (rc)
+ printk(KERN_CRIT "%s: MMC init failure (%d)\n", __func__, rc);
+#endif
+
}
static struct map_desc trout_io_desc[] __initdata = {
*
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
&msm_device_sdc4,
};
-int __init msm_add_sdcc(unsigned int controller, struct mmc_platform_data *plat,
+int __init msm_add_sdcc(unsigned int controller,
+ struct msm_mmc_platform_data *plat,
unsigned int stat_irq, unsigned long stat_irq_flags)
{
struct platform_device *pdev;
#define __ASM_ARCH_MSM_BOARD_H
#include <linux/types.h>
+#include <mach/mmc.h>
/* platform device data structures */
void __init msm_init_gpio(void);
void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks);
void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *);
+int __init msm_add_sdcc(unsigned int controller,
+ struct msm_mmc_platform_data *plat,
+ unsigned int stat_irq, unsigned long stat_irq_flags);
#endif
int num_funcs;
};
-struct mmc_platform_data {
+struct msm_mmc_platform_data {
unsigned int ocr_mask; /* available voltages */
u32 (*translate_vdd)(struct device *, unsigned int);
unsigned int (*status)(struct device *);
return 0;
}
-static int __init msm_smd_probe(struct platform_device *pdev)
+static int __devinit msm_smd_probe(struct platform_device *pdev)
{
pr_info("smd_init()\n");
/* USB */
#if defined(CONFIG_USB_ULPI)
usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_otg_host, &usbotg_pdata);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
static void lilly1131_usb_init(void)
{
usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_usbh1, &usbh1_pdata);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#if defined(CONFIG_USB_ULPI)
/* USB */
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
static int __init moboard_usbh2_init(void)
{
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
}
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}
static struct platform_nand_data qong_nand_data = {
.chip = {
+ .nr_chips = 1,
.chip_delay = 20,
.options = 0,
},
static int __init smartbot_otg_host_init(void)
{
otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
return mxc_register_device(&mxc_otg_host, &otg_host_pdata);
}
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
+#include <linux/mmc/card.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
},
};
+static void pandora_wl1251_init_card(struct mmc_card *card)
+{
+ /*
+ * We have TI wl1251 attached to MMC3. Pass this information to
+ * SDIO core because it can't be probed by normal methods.
+ */
+ card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+ card->cccr.wide_bus = 1;
+ card->cis.vendor = 0x104c;
+ card->cis.device = 0x9066;
+ card->cis.blksize = 512;
+ card->cis.max_dtr = 20000000;
+}
+
static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
.wires = 4,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
+ .init_card = pandora_wl1251_init_card,
},
{} /* Terminator */
};
mmc->slots[0].gpio_wp = c->gpio_wp;
mmc->slots[0].remux = c->remux;
+ mmc->slots[0].init_card = c->init_card;
if (c->cover_only)
mmc->slots[0].cover = 1;
* published by the Free Software Foundation.
*/
+struct mmc_card;
+
struct omap2_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
u8 wires; /* 1/4/8 wires */
int ocr_mask; /* temporary HACK */
/* Remux (pad configuation) when powering on/off */
void (*remux)(struct device *dev, int slot, int power_on);
+ /* init some special card */
+ void (*init_card)(struct mmc_card *card);
};
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
static struct platform_nand_data ts78xx_ts_nand_data = {
.chip = {
+ .nr_chips = 1,
.part_probe_types = ts_nand_part_probes,
.partitions = ts78xx_ts_nand_parts,
.nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts),
bool "Toradex Colibri PXA270"
select PXA27x
+config MACH_COLIBRI_PXA270_EVALBOARD
+ bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
+ depends on MACH_COLIBRI
+
+config MACH_COLIBRI_PXA270_INCOME
+ bool "Income s.r.o. PXA270 SBC"
+ depends on MACH_COLIBRI
+ select PXA27x
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
select PXA3xx
bool "PXA based Palm PDAs"
select HAVE_PWM
+config MACH_PALM27X
+ bool
+
config MACH_PALMTE2
bool "Palm Tungsten|E2"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
+ select MACH_PALM27X
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
+ select MACH_PALM27X
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
+ select MACH_PALM27X
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
+ select MACH_PALM27X
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
-config SHARPSL_PM
- bool
- select APM_EMULATION
- select SHARPSL_PM_MAX1111
-
-config SHARPSL_PM_MAX1111
- bool
- depends on !CORGI_SSP_DEPRECATED
- select HWMON
- select SENSORS_MAX1111
+config PXA_SHARPSL_DETECT_MACH_ID
+ bool "Detect machine ID at run-time in the decompressor"
+ depends on PXA_SHARPSL
+ help
+ Say Y here if you want the zImage decompressor to detect
+ the Zaurus machine ID at run-time. For latest kexec-based
+ boot loader, this is not necessary.
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
select PXA25x
select PXA_HAVE_BOARD_IRQS
+config TOSA_BT
+ tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+ depends on MACH_TOSA
+ select RFKILL
+ help
+ This is a simple driver that is able to control
+ the state of built in bluetooth chip on tosa.
+
+config TOSA_USE_EXT_KEYCODES
+ bool "Tosa keyboard: use extended keycodes"
+ depends on MACH_TOSA
+ default n
+ help
+ Say Y here to enable the tosa keyboard driver to generate extended
+ (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+ by either console keyboard driver or by Kdrive keybd driver.
+
+ Say Y only if you know, what you are doing!
+
config MACH_ICONTROL
bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
select CPU_PXA320
help
Enable common support for Sharp Cxx00 models
-config TOSA_BT
- tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
- depends on MACH_TOSA
- select RFKILL
- help
- This is a simple driver that is able to control
- the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
- bool "Tosa keyboard: use extended keycodes"
- depends on MACH_TOSA
- default n
- help
- Say Y here to enable the tosa keyboard driver to generate extended
- (>= 127) keycodes. Be aware, that they can't be correctly interpreted
- by either console keyboard driver or by Kdrive keybd driver.
-
- Say Y only if you know, what you are doing!
+config SHARPSL_PM
+ bool
+ select APM_EMULATION
+ select SHARPSL_PM_MAX1111
+config SHARPSL_PM_MAX1111
+ bool
+ select HWMON
+ select SENSORS_MAX1111
config PXA_HAVE_BOARD_IRQS
bool
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
-obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
+obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
obj-$(CONFIG_MACH_VPAC270) += vpac270.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMTC) += palmtc.o
+obj-$(CONFIG_MACH_PALM27X) += palm27x.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
-obj-$(CONFIG_MACH_E330) += e330.o
-obj-$(CONFIG_MACH_E350) += e350.o
-obj-$(CONFIG_MACH_E740) += e740.o
-obj-$(CONFIG_MACH_E750) += e750.o
-obj-$(CONFIG_MACH_E400) += e400.o
-obj-$(CONFIG_MACH_E800) += e800.o
obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/ioport.h>
+#include <linux/ucb1400.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/types.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/physmap.h>
+#include <linux/regulator/max1586.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include "generic.h"
#include "devices.h"
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long balloon3_pin_config[] __initdata = {
+ /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* Reset, configured as GPIO wakeup source */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+ /* LEDs */
+ GPIO9_GPIO, /* NAND activity LED */
+ GPIO10_GPIO, /* Heartbeat LED */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO113_AC97_nRESET,
+ GPIO95_GPIO,
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+
+ /* USB Host */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * Compatibility: Parameter parsing
+ ******************************************************************************/
static unsigned long balloon3_irq_enabled;
static unsigned long balloon3_features_present =
}
early_param("balloon3_features", parse_balloon3_features);
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition balloon3_nor_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data balloon3_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = balloon3_nor_partitions,
+ .nr_parts = ARRAY_SIZE(balloon3_nor_partitions)
+ }
+};
+
+static struct resource balloon3_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device balloon3_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &balloon3_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = balloon3_flash_data,
+ },
+};
+static void __init balloon3_nor_init(void)
+{
+ platform_device_register(&balloon3_flash);
+}
+#else
+static inline void balloon3_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+ .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
+};
+
+
+static struct platform_device balloon3_ucb1400_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_ucb1400_pdata,
+ },
+};
+
+static void __init balloon3_ts_init(void)
+{
+ if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
+ return;
+
+ pxa_set_ac97_info(NULL);
+ platform_device_register(&balloon3_ucb1400_device);
+}
+#else
+static inline void balloon3_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+ {
+ .pixclock = 38000,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 8,
+ .vsync_len = 2,
+ .upper_margin = 4,
+ .lower_margin = 5,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info balloon3_lcd_screen = {
+ .modes = balloon3_lcd_modes,
+ .num_modes = ARRAY_SIZE(balloon3_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void balloon3_backlight_power(int on)
+{
+ gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static void __init balloon3_lcd_init(void)
+{
+ int ret;
+
+ if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
+ return;
+
+ ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
+ if (ret) {
+ pr_err("Requesting BKL-ON GPIO failed!\n");
+ goto err;
+ }
+
+ ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+ if (ret) {
+ pr_err("Setting BKL-ON GPIO direction failed!\n");
+ goto err2;
+ }
+
+ balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
+ set_pxa_fb_info(&balloon3_lcd_screen);
+ return;
+
+err2:
+ gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
+err:
+ return;
+}
+#else
+static inline void balloon3_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+ .detect_delay_ms = 200,
+};
+
+static void __init balloon3_mmc_init(void)
+{
+ pxa_set_mci_info(&balloon3_mci_platform_data);
+}
+#else
+static inline void balloon3_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static void balloon3_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR &= ~UP2OCR_DPPUE;
+}
+
+static int balloon3_udc_is_connected(void)
+{
+ return 1;
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
+ .udc_command = balloon3_udc_command,
+ .udc_is_connected = balloon3_udc_is_connected,
+ .gpio_pullup = -1,
+};
+
+static void __init balloon3_udc_init(void)
+{
+ pxa_set_udc_info(&balloon3_udc_info);
+ platform_device_register(&balloon3_gpio_vbus);
+}
+#else
+static inline void balloon3_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+ .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
+};
+
+static void __init balloon3_irda_init(void)
+{
+ pxa_set_ficp_info(&balloon3_ficp_platform_data);
+}
+#else
+static inline void balloon3_irda_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data balloon3_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init balloon3_uhc_init(void)
+{
+ if (!balloon3_has(BALLOON3_FEATURE_OHCI))
+ return;
+ pxa_set_ohci_info(&balloon3_ohci_info);
+}
+#else
+static inline void balloon3_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led balloon3_gpio_leds[] = {
+ {
+ .name = "balloon3:green:idle",
+ .default_trigger = "heartbeat",
+ .gpio = BALLOON3_GPIO_LED_IDLE,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:green:nand",
+ .default_trigger = "nand-disk",
+ .gpio = BALLOON3_GPIO_LED_NAND,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data balloon3_gpio_led_info = {
+ .leds = balloon3_gpio_leds,
+ .num_leds = ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3_leds = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &balloon3_gpio_led_info,
+ }
+};
+
+struct gpio_led balloon3_pcf_gpio_leds[] = {
+ {
+ .name = "balloon3:green:led0",
+ .gpio = BALLOON3_PCF_GPIO_LED0,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:green:led1",
+ .gpio = BALLOON3_PCF_GPIO_LED1,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led2",
+ .gpio = BALLOON3_PCF_GPIO_LED2,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led3",
+ .gpio = BALLOON3_PCF_GPIO_LED3,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led4",
+ .gpio = BALLOON3_PCF_GPIO_LED4,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led5",
+ .gpio = BALLOON3_PCF_GPIO_LED5,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:red:led6",
+ .gpio = BALLOON3_PCF_GPIO_LED6,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:red:led7",
+ .gpio = BALLOON3_PCF_GPIO_LED7,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
+ .leds = balloon3_pcf_gpio_leds,
+ .num_leds = ARRAY_SIZE(balloon3_pcf_gpio_leds),
+};
+
+static struct platform_device balloon3_pcf_leds = {
+ .name = "leds-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &balloon3_pcf_gpio_led_info,
+ }
+};
+
+static void __init balloon3_leds_init(void)
+{
+ platform_device_register(&balloon3_leds);
+ platform_device_register(&balloon3_pcf_leds);
+}
+#else
+static inline void balloon3_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * FPGA IRQ
+ ******************************************************************************/
static void balloon3_mask_irq(unsigned int irq)
{
int balloon3_irq = (irq - BALLOON3_IRQ(0));
{
unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
balloon3_irq_enabled;
-
do {
/* clear useless edge notification */
if (desc->chip->ack)
"enabled\n", __func__, BALLOON3_AUX_NIRQ);
}
-static unsigned long balloon3_ac97_pin_config[] = {
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
- GPIO113_AC97_nRESET,
-};
-
-static void balloon3_backlight_power(int on)
-{
- pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
- gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
-
-static unsigned long balloon3_lcd_pin_config[] = {
- /* LCD - 16bpp Active TFT */
- GPIOxx_LCD_TFT_16BPP,
-
- GPIO99_GPIO, /* Backlight */
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
+static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
+ .gpio_base = BALLOON3_PCF_GPIO_BASE,
+ .n_latch = 0,
+ .setup = NULL,
+ .teardown = NULL,
+ .context = NULL,
};
-static struct pxafb_mode_info balloon3_lcd_modes[] = {
+static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
{
- .pixclock = 38000,
- .xres = 480,
- .yres = 640,
- .bpp = 16,
- .hsync_len = 8,
- .left_margin = 8,
- .right_margin = 8,
- .vsync_len = 2,
- .upper_margin = 4,
- .lower_margin = 5,
- .sync = 0,
+ I2C_BOARD_INFO("pcf8574a", 0x38),
+ .platform_data = &balloon3_pcf857x_pdata,
},
};
-static struct pxafb_mach_info balloon3_pxafb_info = {
- .modes = balloon3_lcd_modes,
- .num_modes = ARRAY_SIZE(balloon3_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
- .pxafb_backlight_power = balloon3_backlight_power,
-};
+static void __init balloon3_i2c_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
+}
+#else
+static inline void balloon3_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * NAND
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+static uint16_t balloon3_ctl =
+ BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+ BALLOON3_NAND_CONTROL_FLWP;
+
+static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
-static unsigned long balloon3_mmc_pin_config[] = {
- GPIO32_MMC_CLK,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
- GPIO112_MMC_CMD,
-};
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_CLE)
+ balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
+ else
+ balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
-static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
-
- if ((1 << vdd) & p_d->ocr_mask) {
- pr_debug("%s: on\n", __func__);
- /* FIXME something to prod here? */
- } else {
- pr_debug("%s: off\n", __func__);
- /* FIXME something to prod here? */
+ if (ctrl & NAND_ALE)
+ balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
+ else
+ balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
+
+ __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
-static struct pxamci_platform_data balloon3_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .setpower = balloon3_mci_setpower,
-};
+static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip < 0 || chip > 3)
+ return;
-static int balloon3_udc_is_connected(void)
+ balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
+ BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 |
+ BALLOON3_NAND_CONTROL_FLCE3;
+
+ /* Deassert correct nCE line */
+ balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
+
+ __raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+}
+
+static int balloon3_nand_probe(struct platform_device *pdev)
{
- pr_debug("%s: udc connected\n", __func__);
- return 1;
+ void __iomem *temp_map;
+ uint16_t ver;
+ int ret;
+
+ __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
+
+ ver = __raw_readw(BALLOON3_FPGA_VER);
+ if (ver > 0x0201)
+ pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+ "NAND support might be broken in this version!", ver);
+
+ /* Power up the NAND chips */
+ ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
+ if (ret)
+ goto err1;
+
+ ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
+ if (ret)
+ goto err2;
+
+ gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
+
+ /* Deassert all nCE lines and write protect line */
+ __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+ return 0;
+
+err2:
+ gpio_free(BALLOON3_GPIO_RUN_NAND);
+err1:
+ return ret;
}
-static void balloon3_udc_command(int cmd)
+static void balloon3_nand_remove(struct platform_device *pdev)
{
- switch (cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
- pr_debug("%s: connect\n", __func__);
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- UP2OCR &= ~UP2OCR_DPPUE;
- pr_debug("%s: disconnect\n", __func__);
- break;
- }
+ /* Power down the NAND chips */
+ gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
+ gpio_free(BALLOON3_GPIO_RUN_NAND);
}
-static struct pxa2xx_udc_mach_info balloon3_udc_info = {
- .udc_is_connected = balloon3_udc_is_connected,
- .udc_command = balloon3_udc_command,
+static struct mtd_partition balloon3_partition_info[] = {
+ [0] = {
+ .name = "Boot",
+ .offset = 0,
+ .size = SZ_4M,
+ },
+ [1] = {
+ .name = "RootFS",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ },
};
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-};
+static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
-static unsigned long balloon3_ohci_pin_config[] = {
- GPIO88_USBH1_PWR,
- GPIO89_USBH1_PEN,
+struct platform_nand_data balloon3_nand_pdata = {
+ .chip = {
+ .nr_chips = 4,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(balloon3_partition_info),
+ .partitions = balloon3_partition_info,
+ .chip_delay = 50,
+ .part_probe_types = balloon3_part_probes,
+ },
+ .ctrl = {
+ .hwcontrol = 0,
+ .dev_ready = 0,
+ .select_chip = balloon3_nand_select_chip,
+ .cmd_ctrl = balloon3_nand_cmd_ctl,
+ .probe = balloon3_nand_probe,
+ .remove = balloon3_nand_remove,
+ },
};
-static struct pxaohci_platform_data balloon3_ohci_platform_data = {
- .port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+static struct resource balloon3_nand_resource[] = {
+ [0] = {
+ .start = BALLOON3_NAND_BASE,
+ .end = BALLOON3_NAND_BASE + 0x4,
+ .flags = IORESOURCE_MEM,
+ },
};
-static unsigned long balloon3_pin_config[] __initdata = {
- /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_BTUART_RTS,
-
- /* Wakeup GPIO */
- GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-
- /* NAND & IDLE LED GPIOs */
- GPIO9_GPIO,
- GPIO10_GPIO,
+static struct platform_device balloon3_nand = {
+ .name = "gen_nand",
+ .num_resources = ARRAY_SIZE(balloon3_nand_resource),
+ .resource = balloon3_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &balloon3_nand_pdata,
+ }
};
-static struct gpio_led balloon3_gpio_leds[] = {
+static void __init balloon3_nand_init(void)
+{
+ platform_device_register(&balloon3_nand);
+}
+#else
+static inline void balloon3_nand_init(void) {}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
{
- .name = "balloon3:green:idle",
- .default_trigger = "heartbeat",
- .gpio = BALLOON3_GPIO_LED_IDLE,
- .active_low = 1,
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data balloon3_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
+ .consumer_supplies = balloon3_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(balloon3_max1587a_consumers),
+};
+
+static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
{
- .name = "balloon3:green:nand",
- .default_trigger = "nand-disk",
- .gpio = BALLOON3_GPIO_LED_NAND,
- .active_low = 1,
- },
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &balloon3_max1587a_v3_info,
+ }
};
-static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
- .leds = balloon3_gpio_leds,
- .num_leds = ARRAY_SIZE(balloon3_gpio_leds),
+static struct max1586_platform_data balloon3_max1587a_info = {
+ .subdevs = balloon3_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
};
-static struct platform_device balloon3led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &balloon3_gpio_leds_platform_data,
+static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &balloon3_max1587a_info,
},
};
-static void __init balloon3_init(void)
+static void __init balloon3_pmic_init(void)
{
- pr_info("Initialising Balloon3\n");
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
+}
+#else
+static inline void balloon3_pmic_init(void) {}
+#endif
- /* system bus arbiter setting
- * - Core_Park
- * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
- */
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init balloon3_init(void)
+{
ARB_CNTRL = ARB_CORE_PARK | 0x234;
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- pxa_set_i2c_info(NULL);
- if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
- pxa_set_ac97_info(NULL);
- }
-
- if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
- gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
- "LCD Backlight Power");
- gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
- set_pxa_fb_info(&balloon3_pxafb_info);
- }
-
- if (balloon3_has(BALLOON3_FEATURE_MMC)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
- pxa_set_mci_info(&balloon3_mci_platform_data);
- }
- pxa_set_ficp_info(&balloon3_ficp_platform_data);
- if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
- pxa_set_ohci_info(&balloon3_ohci_platform_data);
- }
- pxa_set_udc_info(&balloon3_udc_info);
-
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
-
- platform_device_register(&balloon3led_device);
+ balloon3_i2c_init();
+ balloon3_irda_init();
+ balloon3_lcd_init();
+ balloon3_leds_init();
+ balloon3_mmc_init();
+ balloon3_nand_init();
+ balloon3_nor_init();
+ balloon3_pmic_init();
+ balloon3_ts_init();
+ balloon3_udc_init();
+ balloon3_uhc_init();
}
static struct map_desc balloon3_io_desc[] __initdata = {
{
pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+ set_irq_wake(IRQ_WAKEUP0, 1);
}
static void __init cm_x300_init_wi2wi(void)
{
cm_x300_init_mfp();
- pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
+ if (cpu_is_pxa300())
+ pxa_set_ffuart_info(NULL);
cm_x300_init_da9030();
cm_x300_init_dm9000();
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+ *
+ * Support for Toradex PXA270 based Colibri Evaluation Carrier Board
+ * Daniel Mack <daniel@caiaq.de>
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO0_GPIO, /* SD detect */
+
+ /* FFUART */
+ GPIO39_FFUART_TXD,
+ GPIO34_FFUART_RXD,
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ GPIO119_USBH2_PWR,
+ GPIO120_USBH2_PEN,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
+ .gpio_card_detect = GPIO0_COLIBRI_PXA270_SD_DETECT,
+ .gpio_card_ro = -1,
+ .detect_delay_ms = 200,
+};
+
+static void __init colibri_pxa270_mmc_init(void)
+{
+ pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
+}
+#else
+static inline void colibri_pxa270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_pxa270_ohci_init(struct device *dev)
+{
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+ return 0;
+}
+
+static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 |
+ POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .init = colibri_pxa270_ohci_init,
+};
+
+static void __init colibri_pxa270_uhc_init(void)
+{
+ pxa_set_ohci_info(&colibri_pxa270_ohci_info);
+}
+#else
+static inline void colibri_pxa270_uhc_init(void) {}
+#endif
+
+void __init colibri_pxa270_evalboard_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ colibri_pxa270_mmc_init();
+ colibri_pxa270_uhc_init();
+}
+
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/income.c
+ *
+ * Support for Income s.r.o. SH-Dmaster PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Pavel Revak <palo@bielyvlk.sk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/sysdev.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/pxafb.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define GPIO114_INCOME_ETH_IRQ (114)
+#define GPIO0_INCOME_SD_DETECT (0)
+#define GPIO0_INCOME_SD_RO (1)
+#define GPIO54_INCOME_LED_A (54)
+#define GPIO55_INCOME_LED_B (55)
+#define GPIO113_INCOME_TS_IRQ (113)
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t income_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO0_GPIO, /* SD detect */
+ GPIO1_GPIO, /* SD read-only */
+
+ /* FFUART */
+ GPIO39_FFUART_TXD,
+ GPIO34_FFUART_RXD,
+
+ /* BFUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* LED */
+ GPIO54_GPIO, /* LED A */
+ GPIO55_GPIO, /* LED B */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data income_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
+ .gpio_card_detect = GPIO0_INCOME_SD_DETECT,
+ .gpio_card_ro = GPIO0_INCOME_SD_RO,
+ .detect_delay_ms = 200,
+};
+
+static void __init income_mmc_init(void)
+{
+ pxa_set_mci_info(&income_mci_platform_data);
+}
+#else
+static inline void income_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data income_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init income_uhc_init(void)
+{
+ pxa_set_ohci_info(&income_ohci_info);
+}
+#else
+static inline void income_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led income_gpio_leds[] = {
+ {
+ .name = "income:green:leda",
+ .default_trigger = "none",
+ .gpio = GPIO54_INCOME_LED_A,
+ .active_low = 1,
+ },
+ {
+ .name = "income:green:ledb",
+ .default_trigger = "none",
+ .gpio = GPIO55_INCOME_LED_B,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led_platform_data income_gpio_led_info = {
+ .leds = income_gpio_leds,
+ .num_leds = ARRAY_SIZE(income_gpio_leds),
+};
+
+static struct platform_device income_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &income_gpio_led_info,
+ }
+};
+
+static void __init income_led_init(void)
+{
+ platform_device_register(&income_leds);
+}
+#else
+static inline void income_led_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct i2c_board_info __initdata income_i2c_devs[] = {
+ {
+ I2C_BOARD_INFO("ds1340", 0x68),
+ }, {
+ I2C_BOARD_INFO("lm75", 0x4f),
+ },
+};
+
+static void __init income_i2c_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
+}
+#else
+static inline void income_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info income_lcd_modes[] = {
+{
+ .pixclock = 144700,
+ .xres = 320,
+ .yres = 240,
+ .bpp = 32,
+ .depth = 18,
+
+ .left_margin = 10,
+ .right_margin = 10,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 20,
+ .vsync_len = 2,
+
+ .sync = FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info income_lcd_screen = {
+ .modes = income_lcd_modes,
+ .num_modes = ARRAY_SIZE(income_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init income_lcd_init(void)
+{
+ set_pxa_fb_info(&income_lcd_screen);
+}
+#else
+static inline void income_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
+static struct platform_pwm_backlight_data income_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 0x3ff,
+ .dft_brightness = 0x1ff,
+ .pwm_period_ns = 1000000,
+};
+
+static struct platform_device income_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &income_backlight_data,
+ },
+};
+
+static void __init income_pwm_init(void)
+{
+ platform_device_register(&income_backlight);
+}
+#else
+static inline void income_pwm_init(void) {}
+#endif
+
+void __init colibri_pxa270_income_boardinit(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ income_mmc_init();
+ income_uhc_init();
+ income_led_init();
+ income_i2c_init();
+ income_lcd_init();
+ income_pwm_init();
+}
+
*
* Support for Toradex PXA270 based Colibri module
* Daniel Mack <daniel@caiaq.de>
+ * Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
*/
#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
+#include <linux/kernel.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/ucb1400.h>
+
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
-#include <mach/pxa27x.h>
+#include <mach/audio.h>
#include <mach/colibri.h>
+#include <mach/pxa27x.h>
-#include "generic.h"
#include "devices.h"
+#include "generic.h"
-/*
- * GPIO configuration
- */
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
+ /* Ethernet */
GPIO78_nCS_2, /* Ethernet CS */
GPIO114_GPIO, /* Ethernet IRQ */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO95_AC97_nRESET,
+ GPIO98_AC97_SYSCLK,
+ GPIO113_GPIO, /* Touchscreen IRQ */
};
-/*
- * NOR flash
- */
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition colibri_partitions[] = {
{
.name = "Bootloader",
.offset = 0x00000000,
.size = 0x00040000,
- .mask_flags = MTD_WRITEABLE /* force read-only */
+ .mask_flags = MTD_WRITEABLE /* force read-only */
}, {
.name = "Kernel",
.offset = 0x00040000,
.num_resources = 1,
};
-/*
- * DM9000 Ethernet
- */
-#if defined(CONFIG_DM9000)
-static struct resource dm9000_resources[] = {
- [0] = {
- .start = COLIBRI_PXA270_ETH_PHYS,
- .end = COLIBRI_PXA270_ETH_PHYS + 3,
+static void __init colibri_pxa270_nor_init(void)
+{
+ platform_device_register(&colibri_pxa270_flash_device);
+}
+#else
+static inline void colibri_pxa270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource colibri_pxa270_dm9000_resources[] = {
+ {
+ .start = PXA_CS2_PHYS,
+ .end = PXA_CS2_PHYS + 3,
.flags = IORESOURCE_MEM,
},
- [1] = {
- .start = COLIBRI_PXA270_ETH_PHYS + 4,
- .end = COLIBRI_PXA270_ETH_PHYS + 4 + 500,
+ {
+ .start = PXA_CS2_PHYS + 4,
+ .end = PXA_CS2_PHYS + 4 + 500,
.flags = IORESOURCE_MEM,
},
- [2] = {
- .start = COLIBRI_PXA270_ETH_IRQ,
- .end = COLIBRI_PXA270_ETH_IRQ,
+ {
+ .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+ .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
-static struct platform_device dm9000_device = {
+static struct platform_device colibri_pxa270_dm9000_device = {
.name = "dm9000",
.id = -1,
- .num_resources = ARRAY_SIZE(dm9000_resources),
- .resource = dm9000_resources,
+ .num_resources = ARRAY_SIZE(colibri_pxa270_dm9000_resources),
+ .resource = colibri_pxa270_dm9000_resources,
};
-#endif /* CONFIG_DM9000 */
-static struct platform_device *colibri_pxa270_devices[] __initdata = {
- &colibri_pxa270_flash_device,
-#if defined(CONFIG_DM9000)
- &dm9000_device,
+static void __init colibri_pxa270_eth_init(void)
+{
+ platform_device_register(&colibri_pxa270_dm9000_device);
+}
+#else
+static inline void colibri_pxa270_eth_init(void) {}
#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
+ .irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+};
+
+static struct platform_device colibri_pxa270_ucb1400_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+ .dev = {
+ .platform_data = &colibri_pxa270_ucb1400_pdata,
+ },
};
+static void __init colibri_pxa270_tsc_init(void)
+{
+ pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
+ platform_device_register(&colibri_pxa270_ucb1400_device);
+}
+#else
+static inline void colibri_pxa270_tsc_init(void) {}
+#endif
+
+static int colibri_pxa270_baseboard;
+core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
+
static void __init colibri_pxa270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
+
+ colibri_pxa270_nor_init();
+ colibri_pxa270_eth_init();
+ colibri_pxa270_tsc_init();
+
+ switch (colibri_pxa270_baseboard) {
+ case COLIBRI_PXA270_EVALBOARD:
+ colibri_pxa270_evalboard_init();
+ break;
+ case COLIBRI_PXA270_INCOME:
+ colibri_pxa270_income_boardinit();
+ break;
+ default:
+ printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
+ colibri_pxa270_baseboard);
+ }
+}
+
+/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
+ * with the INCOME mach type or with COLIBRI and the kernel parameter
+ * "colibri_pxa270_baseboard=1"
+ */
+static void __init colibri_pxa270_income_init(void)
+{
+ colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
+ colibri_pxa270_init();
}
MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.timer = &pxa_timer,
MACHINE_END
+MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .init_machine = colibri_pxa270_income_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/audio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/udc.h>
#include "generic.h"
#include "devices.h"
static inline void colibri_pxa320_init_ohci(void) {}
#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
+ .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96),
+ .gpio_pullup = -1,
+};
+
+static struct platform_device colibri_pxa320_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &colibri_pxa320_gpio_vbus_info,
+ },
+};
+
+static void colibri_pxa320_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR = UP2OCR_HXOE;
+}
+
+static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
+ .udc_command = colibri_pxa320_udc_command,
+ .gpio_pullup = -1,
+};
+
+static void __init colibri_pxa320_init_udc(void)
+{
+ pxa_set_udc_info(&colibri_pxa320_udc_info);
+ platform_device_register(&colibri_pxa320_gpio_vbus);
+}
+#else
+static inline void colibri_pxa320_init_udc(void) {}
+#endif
+
static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
GPIO22_MMC1_CLK,
GPIO23_MMC1_CMD,
colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
mfp_to_gpio(MFP_PIN_GPIO28));
colibri_pxa320_init_uart();
+ colibri_pxa320_init_udc();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
#include <mach/udc.h>
#include <mach/pxa2xx_spi.h>
#include <mach/corgi.h>
-#include <mach/sharpsl.h>
+#include <mach/sharpsl_pm.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/scoop.h>
#include "generic.h"
#include "devices.h"
-#include "sharpsl.h"
static unsigned long corgi_pin_config[] __initdata = {
/* Static Memory I/O */
.num_devs = 1,
};
-EXPORT_SYMBOL(corgiscoop_device);
-
static struct w100_mem_info corgi_fb_mem = {
.ext_cntl = 0x00040003,
.sdram_mode_reg = 0x00650021,
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <mach/sharpsl.h>
#include <mach/corgi.h>
#include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl_pm.h>
#include "generic.h"
-#include "sharpsl.h"
#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
case SHARPSL_STATUS_ACIN:
return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
case SHARPSL_STATUS_LOCK:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
case SHARPSL_STATUS_FATAL:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
case SHARPSL_ACIN_VOLT:
return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
case SHARPSL_BATT_TEMP:
.should_wakeup = corgi_should_wakeup,
#if defined(CONFIG_LCD_CORGI)
.backlight_limit = corgi_lcd_limit_intensity,
-#elif defined(CONFIG_BACKLIGHT_CORGI)
- .backlight_limit = corgibl_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
.charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <asm/pmu.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
dev_err(&dev->dev, "unable to register device: %d\n", ret);
}
+static struct resource pxa_resource_pmu = {
+ .start = IRQ_PMU,
+ .end = IRQ_PMU,
+ .flags = IORESOURCE_IRQ,
+};
+
+struct platform_device pxa_device_pmu = {
+ .name = "arm-pmu",
+ .id = ARM_PMU_DEVICE_CPU,
+ .resource = &pxa_resource_pmu,
+ .num_resources = 1,
+};
+
static struct resource pxamci_resources[] = {
[0] = {
.start = 0x41100000,
+extern struct platform_device pxa_device_pmu;
extern struct platform_device pxa_device_mci;
extern struct platform_device pxa3xx_device_mci2;
extern struct platform_device pxa3xx_device_mci3;
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba e330 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
- .enable = &eseries_tmio_enable,
- .disable = &eseries_tmio_disable,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
- .name = "tc6387xb",
- .id = -1,
- .dev = {
- .platform_data = &e330_tc6387xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e330_tc6387xb_device,
-};
-
-static void __init e330_init(void)
-{
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- eseries_register_clks();
- eseries_get_tmio_gpios();
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E330, "Toshiba e330")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e330_init,
- .timer = &pxa_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba e350 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
- .irq_base = IRQ_BOARD_START,
- .enable = &eseries_tmio_enable,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
- .name = "t7l66xb",
- .id = -1,
- .dev = {
- .platform_data = &e350_t7l66xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e350_t7l66xb_device,
-};
-
-static void __init e350_init(void)
-{
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- eseries_register_clks();
- eseries_get_tmio_gpios();
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E350, "Toshiba e350")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e350_init,
- .timer = &pxa_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/pxafb.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
- .pixclock = 140703,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .hsync_len = 4,
- .left_margin = 28,
- .right_margin = 8,
- .vsync_len = 3,
- .upper_margin = 5,
- .lower_margin = 6,
- .sync = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
- .modes = &e400_pxafb_mode_info,
- .num_modes = 1,
- .lcd_conn = LCD_COLOR_TFT_16BPP,
- .lccr3 = 0,
- .pxafb_backlight_power = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO12_32KHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
-
- /* TMIO controller */
- GPIO19_GPIO, /* t7l66xb #PCLR */
- GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
- .name = "Internal NAND flash",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
- .options = 0,
- .offs = 4,
- .len = 2,
- .pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
- .num_partitions = 1,
- .partition = &partition_a,
- .badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
- .irq_base = IRQ_BOARD_START,
- .enable = &eseries_tmio_enable,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
-
- .nand_data = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
- .name = "t7l66xb",
- .id = -1,
- .dev = {
- .platform_data = &e400_t7l66xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e400_t7l66xb_device,
-};
-
-static void __init e400_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- /* Fixme - e400 may have a switched clock */
- eseries_register_clks();
- eseries_get_tmio_gpios();
- set_pxa_fb_info(&e400_pxafb_mach_info);
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E400, "Toshiba e400")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e400_init,
- .timer = &pxa_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/clk.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-#include "devices.h"
-
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
- .lcd_format = 0x00008023,
- .lcdd_cntl1 = 0x0f000000,
- .lcdd_cntl2 = 0x0003ffff,
- .genlcd_cntl1 = 0x00ffff03,
- .genlcd_cntl2 = 0x003c0f03,
- .genlcd_cntl3 = 0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
- .xres = 240,
- .yres = 320,
- .left_margin = 20,
- .right_margin = 28,
- .upper_margin = 9,
- .lower_margin = 8,
- .crtc_ss = 0x80140013,
- .crtc_ls = 0x81150110,
- .crtc_gs = 0x80050005,
- .crtc_vpos_gs = 0x000a0009,
- .crtc_rev = 0x0040010a,
- .crtc_dclk = 0xa906000a,
- .crtc_gclk = 0x80050108,
- .crtc_goe = 0x80050108,
- .pll_freq = 57,
- .pixclk_divider = 4,
- .pixclk_divider_rotated = 4,
- .pixclk_src = CLK_SRC_XTAL,
- .sysclk_divider = 1,
- .sysclk_src = CLK_SRC_PLL,
- .crtc_ps1_active = 0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
- .init_data1 = 0x21002103,
- .gpio_dir1 = 0xffffdeff,
- .gpio_oe1 = 0x03c00643,
- .init_data2 = 0x003f003f,
- .gpio_dir2 = 0xffffffff,
- .gpio_oe2 = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
- .modelist = &e740_lcd_mode,
- .num_modes = 1,
- .regs = &e740_lcd_regs,
- .gpio = &e740_w100_gpio_info,
- .xtal_freq = 14318000,
- .xtal_dbl = 1,
-};
-
-static struct resource e740_fb_resources[] = {
- [0] = {
- .start = 0x0c000000,
- .end = 0x0cffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device e740_fb_device = {
- .name = "w100fb",
- .id = -1,
- .dev = {
- .platform_data = &e740_fb_info,
- },
- .num_resources = ARRAY_SIZE(e740_fb_resources),
- .resource = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO79_nCS_3, /* CS3 - IMAGEON */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO12_32KHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
-
- /* TMIO controller */
- GPIO19_GPIO, /* t7l66xb #PCLR */
- GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
- /* UDC */
- GPIO13_GPIO,
- GPIO3_GPIO,
-
- /* IrDA */
- GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
- /* AC97 */
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
-
- /* Audio power control */
- GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
- GPIO40_GPIO, /* Mic amp power */
- GPIO41_GPIO, /* Headphone amp power */
-
- /* PC Card */
- GPIO8_GPIO, /* CD0 */
- GPIO44_GPIO, /* CD1 */
- GPIO11_GPIO, /* IRQ0 */
- GPIO6_GPIO, /* IRQ1 */
- GPIO27_GPIO, /* RST0 */
- GPIO24_GPIO, /* RST1 */
- GPIO20_GPIO, /* PWR0 */
- GPIO23_GPIO, /* PWR1 */
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO52_nPCE_1,
- GPIO53_nPCE_2,
- GPIO54_nPSKTSEL,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
- .irq_base = IRQ_BOARD_START,
- .enable = &eseries_tmio_enable,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
- .name = "t7l66xb",
- .id = -1,
- .dev = {
- .platform_data = &e740_t7l66xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e740_fb_device,
- &e740_t7l66xb_device,
-};
-
-static void __init e740_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- eseries_register_clks();
- clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
- "UDCCLK", &pxa25x_device_udc.dev),
- eseries_get_tmio_gpios();
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
- pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e740_init,
- .timer = &pxa_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
- .lcd_format = 0x00008003,
- .lcdd_cntl1 = 0x00000000,
- .lcdd_cntl2 = 0x0003ffff,
- .genlcd_cntl1 = 0x00fff003,
- .genlcd_cntl2 = 0x003c0f03,
- .genlcd_cntl3 = 0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
- .xres = 240,
- .yres = 320,
- .left_margin = 21,
- .right_margin = 22,
- .upper_margin = 5,
- .lower_margin = 4,
- .crtc_ss = 0x80150014,
- .crtc_ls = 0x8014000d,
- .crtc_gs = 0xc1000005,
- .crtc_vpos_gs = 0x00020147,
- .crtc_rev = 0x0040010a,
- .crtc_dclk = 0xa1700030,
- .crtc_gclk = 0x80cc0015,
- .crtc_goe = 0x80cc0015,
- .crtc_ps1_active = 0x61060017,
- .pll_freq = 57,
- .pixclk_divider = 4,
- .pixclk_divider_rotated = 4,
- .pixclk_src = CLK_SRC_XTAL,
- .sysclk_divider = 1,
- .sysclk_src = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
- .init_data1 = 0x01192f1b,
- .gpio_dir1 = 0xd5ffdeff,
- .gpio_oe1 = 0x000020bf,
- .init_data2 = 0x010f010f,
- .gpio_dir2 = 0xffffffff,
- .gpio_oe2 = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
- .modelist = &e750_lcd_mode,
- .num_modes = 1,
- .regs = &e750_lcd_regs,
- .gpio = &e750_w100_gpio_info,
- .xtal_freq = 14318000,
- .xtal_dbl = 1,
-};
-
-static struct resource e750_fb_resources[] = {
- [0] = {
- .start = 0x0c000000,
- .end = 0x0cffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device e750_fb_device = {
- .name = "w100fb",
- .id = -1,
- .dev = {
- .platform_data = &e750_fb_info,
- },
- .num_resources = ARRAY_SIZE(e750_fb_resources),
- .resource = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO79_nCS_3, /* CS3 - IMAGEON */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO11_3_6MHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
-
- /* TMIO controller */
- GPIO19_GPIO, /* t7l66xb #PCLR */
- GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
- /* UDC */
- GPIO13_GPIO,
- GPIO3_GPIO,
-
- /* IrDA */
- GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
- /* AC97 */
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
-
- /* Audio power control */
- GPIO4_GPIO, /* Headphone amp power */
- GPIO7_GPIO, /* Speaker amp power */
- GPIO37_GPIO, /* Headphone detect */
-
- /* PC Card */
- GPIO8_GPIO, /* CD0 */
- GPIO44_GPIO, /* CD1 */
- GPIO11_GPIO, /* IRQ0 */
- GPIO6_GPIO, /* IRQ1 */
- GPIO27_GPIO, /* RST0 */
- GPIO24_GPIO, /* RST1 */
- GPIO20_GPIO, /* PWR0 */
- GPIO23_GPIO, /* PWR1 */
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO52_nPCE_1,
- GPIO53_nPCE_2,
- GPIO54_nPSKTSEL,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
- .irq_base = IRQ_BOARD_START,
- .scr_pll2cr = 0x0cc1,
- .scr_gper = 0,
- .gpio_base = -1,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
- .enable = &eseries_tmio_enable,
- .disable = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
- .name = "tc6393xb",
- .id = -1,
- .dev = {
- .platform_data = &e750_tc6393xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e750_fb_device,
- &e750_tc6393xb_device,
-};
-
-static void __init e750_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
- "GPIO11_CLK", NULL),
- eseries_get_tmio_gpios();
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
- pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e750_init,
- .timer = &pxa_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
- /* AC97 */
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
- .lcd_format = 0x00008003,
- .lcdd_cntl1 = 0x02a00000,
- .lcdd_cntl2 = 0x0003ffff,
- .genlcd_cntl1 = 0x000ff2a3,
- .genlcd_cntl2 = 0x000002a3,
- .genlcd_cntl3 = 0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
- [0] = {
- .xres = 480,
- .yres = 640,
- .left_margin = 52,
- .right_margin = 148,
- .upper_margin = 2,
- .lower_margin = 6,
- .crtc_ss = 0x80350034,
- .crtc_ls = 0x802b0026,
- .crtc_gs = 0x80160016,
- .crtc_vpos_gs = 0x00020003,
- .crtc_rev = 0x0040001d,
- .crtc_dclk = 0xe0000000,
- .crtc_gclk = 0x82a50049,
- .crtc_goe = 0x80ee001c,
- .crtc_ps1_active = 0x00000000,
- .pll_freq = 128,
- .pixclk_divider = 4,
- .pixclk_divider_rotated = 6,
- .pixclk_src = CLK_SRC_PLL,
- .sysclk_divider = 0,
- .sysclk_src = CLK_SRC_PLL,
- },
- [1] = {
- .xres = 240,
- .yres = 320,
- .left_margin = 15,
- .right_margin = 88,
- .upper_margin = 0,
- .lower_margin = 7,
- .crtc_ss = 0xd010000f,
- .crtc_ls = 0x80070003,
- .crtc_gs = 0x80000000,
- .crtc_vpos_gs = 0x01460147,
- .crtc_rev = 0x00400003,
- .crtc_dclk = 0xa1700030,
- .crtc_gclk = 0x814b0008,
- .crtc_goe = 0x80cc0015,
- .crtc_ps1_active = 0x00000000,
- .pll_freq = 100,
- .pixclk_divider = 6, /* Wince uses 14 which gives a */
- .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
- .pixclk_src = CLK_SRC_PLL,
- .sysclk_divider = 0,
- .sysclk_src = CLK_SRC_PLL,
- }
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
- .init_data1 = 0xc13fc019,
- .gpio_dir1 = 0x3e40df7f,
- .gpio_oe1 = 0x003c3000,
- .init_data2 = 0x00000000,
- .gpio_dir2 = 0x00000000,
- .gpio_oe2 = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
- .ext_cntl = 0x09640011,
- .sdram_mode_reg = 0x00600021,
- .ext_timing_cntl = 0x10001545,
- .io_cntl = 0x7ddd7333,
- .size = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
- unsigned long tmp;
-
- tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
- if (par->mode->xres == 480)
- tmp |= 0x100;
- else
- tmp &= ~0x100;
- w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
- .change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
- .modelist = e800_lcd_mode,
- .num_modes = 2,
- .regs = &e800_lcd_regs,
- .gpio = &e800_w100_gpio_info,
- .mem = &e800_w100_mem_info,
- .tg = &e800_tg_info,
- .xtal_freq = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
- [0] = {
- .start = 0x0c000000,
- .end = 0x0cffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device e800_fb_device = {
- .name = "w100fb",
- .id = -1,
- .dev = {
- .platform_data = &e800_fb_info,
- },
- .num_resources = ARRAY_SIZE(e800_fb_resources),
- .resource = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
- .gpio_vbus = GPIO_E800_USB_DISC,
- .gpio_pullup = GPIO_E800_USB_PULLUP,
- .gpio_pullup_inverted = 1
-};
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
- .irq_base = IRQ_BOARD_START,
- .scr_pll2cr = 0x0cc1,
- .scr_gper = 0,
- .gpio_base = -1,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
- .enable = &eseries_tmio_enable,
- .disable = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
- .name = "tc6393xb",
- .id = -1,
- .dev = {
- .platform_data = &e800_tc6393xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e800_fb_device,
- &e800_tc6393xb_device,
-};
-
-static void __init e800_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
- "GPIO11_CLK", NULL),
- eseries_get_tmio_gpios();
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e800_udc_mach_info);
- pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e800_init,
- .timer = &pxa_timer,
-MACHINE_END
-
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
+#include <linux/mfd/tc6387xb.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/t7l66xb.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <video/w100fb.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
#include <mach/udc.h>
#include <mach/irda.h>
+#include "devices.h"
#include "generic.h"
#include "clock.h"
clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
}
+#ifdef CONFIG_MACH_E330
+/* -------------------- e330 tc6387xb parameters -------------------- */
+
+static struct tc6387xb_platform_data e330_tc6387xb_info = {
+ .enable = &eseries_tmio_enable,
+ .disable = &eseries_tmio_disable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+};
+
+static struct platform_device e330_tc6387xb_device = {
+ .name = "tc6387xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e330_tc6387xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* --------------------------------------------------------------- */
+
+static struct platform_device *e330_devices[] __initdata = {
+ &e330_tc6387xb_device,
+};
+
+static void __init e330_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ eseries_register_clks();
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e330_devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E330, "Toshiba e330")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e330_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E350
+/* -------------------- e350 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e350_t7l66xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .enable = &eseries_tmio_enable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+};
+
+static struct platform_device e350_t7l66xb_device = {
+ .name = "t7l66xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e350_t7l66xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e350_devices[] __initdata = {
+ &e350_t7l66xb_device,
+};
+
+static void __init e350_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ eseries_register_clks();
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e350_devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E350, "Toshiba e350")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e350_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+ .pixclock = 140703,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 28,
+ .right_margin = 8,
+ .vsync_len = 3,
+ .upper_margin = 5,
+ .lower_margin = 6,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+ .modes = &e400_pxafb_mode_info,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+ .lccr3 = 0,
+ .pxafb_backlight_power = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+
+ /* TMIO controller */
+ GPIO19_GPIO, /* t7l66xb #PCLR */
+ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static struct mtd_partition partition_a = {
+ .name = "Internal NAND flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data e400_t7l66xb_nand_config = {
+ .num_partitions = 1,
+ .partition = &partition_a,
+ .badblock_pattern = &e400_t7l66xb_nand_bbt,
+};
+
+static struct t7l66xb_platform_data e400_t7l66xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .enable = &eseries_tmio_enable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+
+ .nand_data = &e400_t7l66xb_nand_config,
+};
+
+static struct platform_device e400_t7l66xb_device = {
+ .name = "t7l66xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e400_t7l66xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e400_devices[] __initdata = {
+ &e400_t7l66xb_device,
+};
+
+static void __init e400_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ /* Fixme - e400 may have a switched clock */
+ eseries_register_clks();
+ eseries_get_tmio_gpios();
+ set_pxa_fb_info(&e400_pxafb_mach_info);
+ platform_add_devices(ARRAY_AND_SIZE(e400_devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E400, "Toshiba e400")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e400_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+ .lcd_format = 0x00008023,
+ .lcdd_cntl1 = 0x0f000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00ffff03,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 20,
+ .right_margin = 28,
+ .upper_margin = 9,
+ .lower_margin = 8,
+ .crtc_ss = 0x80140013,
+ .crtc_ls = 0x81150110,
+ .crtc_gs = 0x80050005,
+ .crtc_vpos_gs = 0x000a0009,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa906000a,
+ .crtc_gclk = 0x80050108,
+ .crtc_goe = 0x80050108,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+ .crtc_ps1_active = 0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+ .init_data1 = 0x21002103,
+ .gpio_dir1 = 0xffffdeff,
+ .gpio_oe1 = 0x03c00643,
+ .init_data2 = 0x003f003f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+ .modelist = &e740_lcd_mode,
+ .num_modes = 1,
+ .regs = &e740_lcd_regs,
+ .gpio = &e740_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device e740_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e740_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e740_fb_resources),
+ .resource = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - IMAGEON */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+
+ /* TMIO controller */
+ GPIO19_GPIO, /* t7l66xb #PCLR */
+ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+ /* UDC */
+ GPIO13_GPIO,
+ GPIO3_GPIO,
+
+ /* IrDA */
+ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* Audio power control */
+ GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
+ GPIO40_GPIO, /* Mic amp power */
+ GPIO41_GPIO, /* Headphone amp power */
+
+ /* PC Card */
+ GPIO8_GPIO, /* CD0 */
+ GPIO44_GPIO, /* CD1 */
+ GPIO11_GPIO, /* IRQ0 */
+ GPIO6_GPIO, /* IRQ1 */
+ GPIO27_GPIO, /* RST0 */
+ GPIO24_GPIO, /* RST1 */
+ GPIO20_GPIO, /* PWR0 */
+ GPIO23_GPIO, /* PWR1 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* -------------------- e740 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e740_t7l66xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .enable = &eseries_tmio_enable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+};
+
+static struct platform_device e740_t7l66xb_device = {
+ .name = "t7l66xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e740_t7l66xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e740_devices[] __initdata = {
+ &e740_fb_device,
+ &e740_t7l66xb_device,
+};
+
+static void __init e740_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ eseries_register_clks();
+ clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
+ "UDCCLK", &pxa25x_device_udc.dev),
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e740_devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e740_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+ .lcd_format = 0x00008003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00fff003,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 21,
+ .right_margin = 22,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0x8014000d,
+ .crtc_gs = 0xc1000005,
+ .crtc_vpos_gs = 0x00020147,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x80cc0015,
+ .crtc_goe = 0x80cc0015,
+ .crtc_ps1_active = 0x61060017,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+ .init_data1 = 0x01192f1b,
+ .gpio_dir1 = 0xd5ffdeff,
+ .gpio_oe1 = 0x000020bf,
+ .init_data2 = 0x010f010f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+ .modelist = &e750_lcd_mode,
+ .num_modes = 1,
+ .regs = &e750_lcd_regs,
+ .gpio = &e750_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device e750_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e750_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e750_fb_resources),
+ .resource = e750_fb_resources,
+};
+
+/* -------------------- e750 MFP parameters -------------------- */
+
+static unsigned long e750_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - IMAGEON */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO11_3_6MHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+
+ /* TMIO controller */
+ GPIO19_GPIO, /* t7l66xb #PCLR */
+ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+ /* UDC */
+ GPIO13_GPIO,
+ GPIO3_GPIO,
+
+ /* IrDA */
+ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* Audio power control */
+ GPIO4_GPIO, /* Headphone amp power */
+ GPIO7_GPIO, /* Speaker amp power */
+ GPIO37_GPIO, /* Headphone detect */
+
+ /* PC Card */
+ GPIO8_GPIO, /* CD0 */
+ GPIO44_GPIO, /* CD1 */
+ GPIO11_GPIO, /* IRQ0 */
+ GPIO6_GPIO, /* IRQ1 */
+ GPIO27_GPIO, /* RST0 */
+ GPIO24_GPIO, /* RST1 */
+ GPIO20_GPIO, /* PWR0 */
+ GPIO23_GPIO, /* PWR1 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------- e750 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e750_tc6393xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .scr_pll2cr = 0x0cc1,
+ .scr_gper = 0,
+ .gpio_base = -1,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+ .enable = &eseries_tmio_enable,
+ .disable = &eseries_tmio_disable,
+};
+
+static struct platform_device e750_tc6393xb_device = {
+ .name = "tc6393xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e750_tc6393xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ------------------------------------------------------------- */
+
+static struct platform_device *e750_devices[] __initdata = {
+ &e750_fb_device,
+ &e750_tc6393xb_device,
+};
+
+static void __init e750_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
+ "GPIO11_CLK", NULL),
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e750_devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E750, "Toshiba e750")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e750_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static unsigned long e800_pin_config[] __initdata = {
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+};
+
+static struct w100_gen_regs e800_lcd_regs = {
+ .lcd_format = 0x00008003,
+ .lcdd_cntl1 = 0x02a00000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x000ff2a3,
+ .genlcd_cntl2 = 0x000002a3,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+ [0] = {
+ .xres = 480,
+ .yres = 640,
+ .left_margin = 52,
+ .right_margin = 148,
+ .upper_margin = 2,
+ .lower_margin = 6,
+ .crtc_ss = 0x80350034,
+ .crtc_ls = 0x802b0026,
+ .crtc_gs = 0x80160016,
+ .crtc_vpos_gs = 0x00020003,
+ .crtc_rev = 0x0040001d,
+ .crtc_dclk = 0xe0000000,
+ .crtc_gclk = 0x82a50049,
+ .crtc_goe = 0x80ee001c,
+ .crtc_ps1_active = 0x00000000,
+ .pll_freq = 128,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 6,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+ },
+ [1] = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 15,
+ .right_margin = 88,
+ .upper_margin = 0,
+ .lower_margin = 7,
+ .crtc_ss = 0xd010000f,
+ .crtc_ls = 0x80070003,
+ .crtc_gs = 0x80000000,
+ .crtc_vpos_gs = 0x01460147,
+ .crtc_rev = 0x00400003,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x814b0008,
+ .crtc_goe = 0x80cc0015,
+ .crtc_ps1_active = 0x00000000,
+ .pll_freq = 100,
+ .pixclk_divider = 6, /* Wince uses 14 which gives a */
+ .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+ }
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+ .init_data1 = 0xc13fc019,
+ .gpio_dir1 = 0x3e40df7f,
+ .gpio_oe1 = 0x003c3000,
+ .init_data2 = 0x00000000,
+ .gpio_dir2 = 0x00000000,
+ .gpio_oe2 = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+ .ext_cntl = 0x09640011,
+ .sdram_mode_reg = 0x00600021,
+ .ext_timing_cntl = 0x10001545,
+ .io_cntl = 0x7ddd7333,
+ .size = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+ unsigned long tmp;
+
+ tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+ if (par->mode->xres == 480)
+ tmp |= 0x100;
+ else
+ tmp &= ~0x100;
+ w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+ .change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+ .modelist = e800_lcd_mode,
+ .num_modes = 2,
+ .regs = &e800_lcd_regs,
+ .gpio = &e800_w100_gpio_info,
+ .mem = &e800_w100_mem_info,
+ .tg = &e800_tg_info,
+ .xtal_freq = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device e800_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e800_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e800_fb_resources),
+ .resource = e800_fb_resources,
+};
+
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+ .gpio_vbus = GPIO_E800_USB_DISC,
+ .gpio_pullup = GPIO_E800_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
+
+/* ----------------- e800 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e800_tc6393xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .scr_pll2cr = 0x0cc1,
+ .scr_gper = 0,
+ .gpio_base = -1,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+ .enable = &eseries_tmio_enable,
+ .disable = &eseries_tmio_disable,
+};
+
+static struct platform_device e800_tc6393xb_device = {
+ .name = "tc6393xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e800_tc6393xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e800_devices[] __initdata = {
+ &e800_fb_device,
+ &e800_tc6393xb_device,
+};
+
+static void __init e800_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
+ "GPIO11_CLK", NULL),
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e800_devices));
+ pxa_set_udc_info(&e800_udc_mach_info);
+ pxa_set_ac97_info(NULL);
+}
+
+MACHINE_START(E800, "Toshiba e800")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e800_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+++ /dev/null
-/*
- * linux/arch/arm/mach-pxa/imote2.c
- *
- * Author: Ed C. Epp
- * Created: Nov 05, 2002
- * Copyright: Intel Corp.
- *
- * Modified 2008: Jonathan Cameron
- *
- * The Imote2 is a wireless sensor node platform sold
- * by Crossbow (www.xbow.com).
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/mfd/da903x.h>
-#include <linux/sht15.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <plat/i2c.h>
-#include <mach/udc.h>
-#include <mach/mmc.h>
-#include <mach/pxa2xx_spi.h>
-#include <mach/pxa27x-udc.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long imote2_pin_config[] __initdata = {
-
- /* Device Identification for wakeup*/
- GPIO102_GPIO,
-
- /* Button */
- GPIO91_GPIO,
-
- /* DA9030 */
- GPIO1_GPIO,
-
- /* MMC */
- GPIO32_MMC_CLK,
- GPIO112_MMC_CMD,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
-
- /* 802.15.4 radio - driver out of mainline */
- GPIO22_GPIO, /* CC_RSTN */
- GPIO114_GPIO, /* CC_FIFO */
- GPIO116_GPIO, /* CC_CCA */
- GPIO0_GPIO, /* CC_FIFOP */
- GPIO16_GPIO, /* CCSFD */
- GPIO115_GPIO, /* Power enable */
-
- /* I2C */
- GPIO117_I2C_SCL,
- GPIO118_I2C_SDA,
-
- /* SSP 3 - 802.15.4 radio */
- GPIO39_GPIO, /* Chip Select */
- GPIO34_SSP3_SCLK,
- GPIO35_SSP3_TXD,
- GPIO41_SSP3_RXD,
-
- /* SSP 2 - to daughter boards */
- GPIO37_GPIO, /* Chip Select */
- GPIO36_SSP2_SCLK,
- GPIO38_SSP2_TXD,
- GPIO11_SSP2_RXD,
-
- /* SSP 1 - to daughter boards */
- GPIO24_GPIO, /* Chip Select */
- GPIO23_SSP1_SCLK,
- GPIO25_SSP1_TXD,
- GPIO26_SSP1_RXD,
-
- /* BTUART Basic Connector*/
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_BTUART_RTS,
-
- /* STUART Serial console via debug board*/
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-
- /* Basic sensor board */
- GPIO96_GPIO, /* accelerometer interrupt */
- GPIO99_GPIO, /* ADC interrupt */
-
- /* SHT15 */
- GPIO100_GPIO,
- GPIO98_GPIO,
-
- /* Connector pins specified as gpios */
- GPIO94_GPIO, /* large basic connector pin 14 */
- GPIO10_GPIO, /* large basic connector pin 23 */
-
- /* LEDS */
- GPIO103_GPIO, /* red led */
- GPIO104_GPIO, /* green led */
- GPIO105_GPIO, /* blue led */
-};
-
-static struct sht15_platform_data platform_data_sht15 = {
- .gpio_data = 100,
- .gpio_sck = 98,
-};
-
-static struct platform_device sht15 = {
- .name = "sht15",
- .id = -1,
- .dev = {
- .platform_data = &platform_data_sht15,
- },
-};
-
-static struct regulator_consumer_supply imote2_sensor_3_con[] = {
- {
- .dev = &sht15.dev,
- .supply = "vcc",
- },
-};
-
-static struct gpio_led imote2_led_pins[] = {
- {
- .name = "imote2:red",
- .gpio = 103,
- .active_low = 1,
- }, {
- .name = "imote2:green",
- .gpio = 104,
- .active_low = 1,
- }, {
- .name = "imote2:blue",
- .gpio = 105,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data imote2_led_data = {
- .num_leds = ARRAY_SIZE(imote2_led_pins),
- .leds = imote2_led_pins,
-};
-
-static struct platform_device imote2_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &imote2_led_data,
- },
-};
-
-/* Reverse engineered partly from Platformx drivers */
-enum imote2_ldos{
- vcc_vref,
- vcc_cc2420,
- vcc_mica,
- vcc_bt,
- /* The two voltages available to sensor boards */
- vcc_sensor_1_8,
- vcc_sensor_3,
-
- vcc_sram_ext, /* directly connected to the pxa271 */
- vcc_pxa_pll,
- vcc_pxa_usim, /* Reference voltage for certain gpios */
- vcc_pxa_mem,
- vcc_pxa_flash,
- vcc_pxa_core, /*Dc-Dc buck not yet supported */
- vcc_lcd,
- vcc_bb,
- vcc_bbio,
- vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
-};
-
-/* The values of the various regulator constraints are obviously dependent
- * on exactly what is wired to each ldo. Unfortunately this information is
- * not generally available. More information has been requested from Xbow
- * but as of yet they haven't been forthcoming.
- *
- * Some of these are clearly Stargate 2 related (no way of plugging
- * in an lcd on the IM2 for example!).
- */
-static struct regulator_init_data imote2_ldo_init_data[] = {
- [vcc_bbio] = {
- .constraints = { /* board default 1.8V */
- .name = "vcc_bbio",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_bb] = {
- .constraints = { /* board default 2.8V */
- .name = "vcc_bb",
- .min_uV = 2700000,
- .max_uV = 3000000,
- },
- },
- [vcc_pxa_flash] = {
- .constraints = {/* default is 1.8V */
- .name = "vcc_pxa_flash",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_cc2420] = { /* also vcc_io */
- .constraints = {
- /* board default is 2.8V */
- .name = "vcc_cc2420",
- .min_uV = 2700000,
- .max_uV = 3300000,
- },
- },
- [vcc_vref] = { /* Reference for what? */
- .constraints = { /* default 1.8V */
- .name = "vcc_vref",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_sram_ext] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_sram_ext",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_mica] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_mica",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_bt] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_bt",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_lcd] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_lcd",
- .min_uV = 2700000,
- .max_uV = 3300000,
- },
- },
- [vcc_io] = { /* Same or higher than everything
- * bar vccbat and vccusb */
- .constraints = { /* default 2.8V */
- .name = "vcc_io",
- .min_uV = 2692000,
- .max_uV = 3300000,
- },
- },
- [vcc_sensor_1_8] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_sensor_1_8",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_sensor_3] = { /* curiously default 2.8V */
- .constraints = {
- .name = "vcc_sensor_3",
- .min_uV = 2800000,
- .max_uV = 3000000,
- },
- .num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
- .consumer_supplies = imote2_sensor_3_con,
- },
- [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
- .constraints = {
- .name = "vcc_pxa_pll",
- .min_uV = 1170000,
- .max_uV = 1430000,
- },
- },
- [vcc_pxa_usim] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_pxa_usim",
- .min_uV = 1710000,
- .max_uV = 2160000,
- },
- },
- [vcc_pxa_mem] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_pxa_mem",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
-};
-
-static struct da903x_subdev_info imote2_da9030_subdevs[] = {
- {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO2,
- .platform_data = &imote2_ldo_init_data[vcc_bbio],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO3,
- .platform_data = &imote2_ldo_init_data[vcc_bb],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO4,
- .platform_data = &imote2_ldo_init_data[vcc_pxa_flash],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO5,
- .platform_data = &imote2_ldo_init_data[vcc_cc2420],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO6,
- .platform_data = &imote2_ldo_init_data[vcc_vref],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO7,
- .platform_data = &imote2_ldo_init_data[vcc_sram_ext],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO8,
- .platform_data = &imote2_ldo_init_data[vcc_mica],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO9,
- .platform_data = &imote2_ldo_init_data[vcc_bt],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO10,
- .platform_data = &imote2_ldo_init_data[vcc_sensor_1_8],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO11,
- .platform_data = &imote2_ldo_init_data[vcc_sensor_3],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO12,
- .platform_data = &imote2_ldo_init_data[vcc_lcd],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO15,
- .platform_data = &imote2_ldo_init_data[vcc_pxa_pll],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO17,
- .platform_data = &imote2_ldo_init_data[vcc_pxa_usim],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO18,
- .platform_data = &imote2_ldo_init_data[vcc_io],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO19,
- .platform_data = &imote2_ldo_init_data[vcc_pxa_mem],
- },
-};
-
-static struct da903x_platform_data imote2_da9030_pdata = {
- .num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
- .subdevs = imote2_da9030_subdevs,
-};
-
-/* As the the imote2 doesn't currently have a conventional SD slot
- * there is no option to hotplug cards, making all this rather simple
- */
-static int imote2_mci_get_ro(struct device *dev)
-{
- return 0;
-}
-
-/* Rather simple case as hotplugging not possible */
-static struct pxamci_platform_data imote2_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
- .get_ro = imote2_mci_get_ro,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
-};
-
-static struct mtd_partition imote2flash_partitions[] = {
- {
- .name = "Bootloader",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0x00040000,
- .mask_flags = 0,
- }, {
- .name = "Filesystem",
- .size = 0x01DC0000,
- .offset = 0x00240000,
- .mask_flags = 0,
- },
-};
-
-static struct resource flash_resources = {
- .start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data imote2_flash_data = {
- .map_name = "cfi_probe",
- .parts = imote2flash_partitions,
- .nr_parts = ARRAY_SIZE(imote2flash_partitions),
- .name = "PXA27xOnChipROM",
- .width = 2,
-};
-
-static struct platform_device imote2_flash_device = {
- .name = "pxa2xx-flash",
- .id = 0,
- .dev = {
- .platform_data = &imote2_flash_data,
- },
- .resource = &flash_resources,
- .num_resources = 1,
-};
-
-/* Some of the drivers here are out of kernel at the moment (parts of IIO)
- * and it may be a while before they are in the mainline.
- */
-static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
- { /* UCAM sensor board */
- .type = "max1239",
- .addr = 0x35,
- }, { /* ITS400 Sensor board only */
- .type = "max1363",
- .addr = 0x34,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = IRQ_GPIO(99),
- }, { /* ITS400 Sensor board only */
- .type = "tsl2561",
- .addr = 0x49,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = IRQ_GPIO(99),
- }, { /* ITS400 Sensor board only */
- .type = "tmp175",
- .addr = 0x4A,
- .irq = IRQ_GPIO(96),
- }, { /* IMB400 Multimedia board */
- .type = "wm8940",
- .addr = 0x1A,
- },
-};
-
-static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
- {
- .type = "da9030",
- .addr = 0x49,
- .platform_data = &imote2_da9030_pdata,
- .irq = gpio_to_irq(1),
- },
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_chip staccel_chip_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
- .gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
- .gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
- { /* Driver in IIO */
- .modalias = "lis3l02dq",
- .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
- .bus_num = 1,
- .chip_select = 0,
- .controller_data = &staccel_chip_info,
- .irq = IRQ_GPIO(96),
- }, { /* Driver out of kernel as it needs considerable rewriting */
- .modalias = "cc2420",
- .max_speed_hz = 6500000,
- .bus_num = 3,
- .chip_select = 0,
- .controller_data = &cc2420_info,
- },
-};
-
-static void im2_udc_command(int cmd)
-{
- switch (cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
- break;
- }
-}
-
-static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
- .udc_command = im2_udc_command,
-};
-
-static struct platform_device *imote2_devices[] = {
- &imote2_flash_device,
- &imote2_leds,
- &sht15,
-};
-
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
- .fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
- .fast_mode = 1,
-};
-
-static void __init imote2_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
-
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
-
- platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
-
- pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
- pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
- pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
- i2c_register_board_info(0, imote2_i2c_board_info,
- ARRAY_SIZE(imote2_i2c_board_info));
- i2c_register_board_info(1, imote2_pwr_i2c_board_info,
- ARRAY_SIZE(imote2_pwr_i2c_board_info));
-
- pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
- pxa_set_i2c_info(&i2c_pdata);
-
- pxa_set_mci_info(&imote2_mci_platform_data);
- pxa_set_udc_info(&imote2_udc_info);
-}
-
-MACHINE_START(INTELMOTE2, "IMOTE 2")
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .map_io = pxa_map_io,
- .init_irq = pxa27x_init_irq,
- .timer = &pxa_timer,
- .init_machine = imote2_init,
- .boot_params = 0xA0000100,
-MACHINE_END
#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
#define BALLOON3_FPGA_LENGTH 0x01000000
-/* FPGA/CPLD registers */
-#define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
-/* fixme - same for now */
-#define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
-#define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
+/* FPGA / CPLD registers for CF socket */
+#define BALLOON3_CF_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
+#define BALLOON3_CF_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
+/* FPGA / CPLD version register */
+#define BALLOON3_FPGA_VER (BALLOON3_FPGA_VIRT + 0x00e0001c)
+/* FPGA / CPLD registers for NAND flash */
+#define BALLOON3_NAND_BASE (PXA_CS4_PHYS + 0x00e00000)
+#define BALLOON3_NAND_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
+#define BALLOON3_NAND_CONTROL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NAND_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
+
/* fpga/cpld interrupt control register */
#define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
-#define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
#define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c)
#define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000)
#define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004)
#define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c)
+/* CF Status Register bits (read-only) bits */
+#define BALLOON3_CF_nIRQ (1 << 0)
+#define BALLOON3_CF_nSTSCHG_BVD1 (1 << 1)
+
+/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
+#define BALLOON3_CF_RESET (1 << 0)
+#define BALLOON3_CF_ENABLE (1 << 1)
+#define BALLOON3_CF_ADD_ENABLE (1 << 2)
+
+/* CF Interrupt sources */
+#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
+
+/* NAND Control register */
+#define BALLOON3_NAND_CONTROL_FLWP (1 << 7)
+#define BALLOON3_NAND_CONTROL_FLSE (1 << 6)
+#define BALLOON3_NAND_CONTROL_FLCE3 (1 << 5)
+#define BALLOON3_NAND_CONTROL_FLCE2 (1 << 4)
+#define BALLOON3_NAND_CONTROL_FLCE1 (1 << 3)
+#define BALLOON3_NAND_CONTROL_FLCE0 (1 << 2)
+#define BALLOON3_NAND_CONTROL_FLALE (1 << 1)
+#define BALLOON3_NAND_CONTROL_FLCLE (1 << 0)
+
+/* NAND Status register */
+#define BALLOON3_NAND_STAT_RNB (1 << 0)
+
+/* NAND Control2 register */
+#define BALLOON3_NAND_CONTROL2_16BIT (1 << 0)
+
/* GPIOs for irqs */
#define BALLOON3_GPIO_AUX_NIRQ (94)
#define BALLOON3_GPIO_CODEC_IRQ (95)
#define BALLOON3_GPIO_S0_CD (105)
+/* NAND */
+#define BALLOON3_GPIO_RUN_NAND (102)
+
+/* PCF8574A Leds */
+#define BALLOON3_PCF_GPIO_BASE 160
+#define BALLOON3_PCF_GPIO_LED0 (BALLOON3_PCF_GPIO_BASE + 0)
+#define BALLOON3_PCF_GPIO_LED1 (BALLOON3_PCF_GPIO_BASE + 1)
+#define BALLOON3_PCF_GPIO_LED2 (BALLOON3_PCF_GPIO_BASE + 2)
+#define BALLOON3_PCF_GPIO_LED3 (BALLOON3_PCF_GPIO_BASE + 3)
+#define BALLOON3_PCF_GPIO_LED4 (BALLOON3_PCF_GPIO_BASE + 4)
+#define BALLOON3_PCF_GPIO_LED5 (BALLOON3_PCF_GPIO_BASE + 5)
+#define BALLOON3_PCF_GPIO_LED6 (BALLOON3_PCF_GPIO_BASE + 6)
+#define BALLOON3_PCF_GPIO_LED7 (BALLOON3_PCF_GPIO_BASE + 7)
+
/* FPGA Interrupt Mask/Acknowledge Register */
#define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */
#define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */
-/* CF Status Register */
-#define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */
-#define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1)
- /* VDD sense / card status changed */
-
-/* CF control register (write) */
-#define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */
-#define BALLOON3_PCMCIA_ENABLE (1 << 1)
-#define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2)
-
/* CPLD (and FPGA) interface definitions */
#define CPLD_LCD0_DATA_SET 0x00
#define CPLD_LCD0_DATA_CLR 0x10
/* Balloon3 Interrupts */
#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
-#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
-
#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
#include <net/ax88796.h>
#include <mach/mfp.h>
+/*
+ * base board glue for PXA270 module
+ */
+
+enum {
+ COLIBRI_PXA270_EVALBOARD = 0,
+ COLIBRI_PXA270_INCOME,
+};
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
+extern void colibri_pxa270_evalboard_init(void);
+#else
+static inline void colibri_pxa270_evalboard_init(void) {}
+#endif
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
+extern void colibri_pxa270_income_boardinit(void);
+#else
+static inline void colibri_pxa270_income_boardinit(void) {}
+#endif
+
/*
* common settings for all modules
*/
/* physical memory regions */
#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
-/* definitions for Colibri PXA270 */
-
-#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
-#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */
-#define COLIBRI_PXA270_ETH_IRQ_GPIO 114
-#define COLIBRI_PXA270_ETH_IRQ \
- gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
+/* GPIO definitions for Colibri PXA270 */
+#define GPIO114_COLIBRI_PXA270_ETH_IRQ 114
+#define GPIO0_COLIBRI_PXA270_SD_DETECT 0
+#define GPIO113_COLIBRI_PXA270_TS_IRQ 113
#endif /* _COLIBRI_H_ */
#define CORGI_GPIO_BACKLIGHT_CONT (CORGI_SCOOP_GPIO_BASE + 7)
#define CORGI_GPIO_MIC_BIAS (CORGI_SCOOP_GPIO_BASE + 8)
-/*
- * Shared data structures
- */
-extern struct platform_device corgiscoop_device;
-
#endif /* __ASM_ARCH_CORGI_H */
/*
GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
-interrupt signal for determining cable presence. On the original gumstix,
-this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+interrupt signal for determining cable presence. On the gumstix F,
this moves to GPIO17 and GPIO37. */
/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
has detected a cable insertion; driven low otherwise. */
-#ifdef CONFIG_ARCH_GUMSTIX_ORIG
-
-#define GPIO_GUMSTIX_USB_GPIOn 81
-#define GPIO_GUMSTIX_USB_GPIOx 83
-
-#else
-
#define GPIO_GUMSTIX_USB_GPIOn 35
#define GPIO_GUMSTIX_USB_GPIOx 41
-#endif
-
/* usb state change */
#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-/*
- * We requires absolute addresses.
- */
-#define PCIO_BASE 0
-
/*
* Workarounds for at least 2 errata so far require this.
* The mapping is set in mach-pxa/generic.c.
--- /dev/null
+/*
+ * Common functions for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __INCLUDE_MACH_PALM27X__
+#define __INCLUDE_MACH_PALM27X__
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void __init palm27x_mmc_init(int detect, int ro, int power,
+ int power_inverted);
+#else
+static inline void palm27x_mmc_init(int detect, int ro, int power,
+ int power_inverted)
+{}
+#endif
+
+#if defined(CONFIG_SUSPEND)
+extern void __init palm27x_pm_init(unsigned long str_base);
+#else
+static inline void palm27x_pm_init(unsigned long str_base) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern struct pxafb_mode_info palm_320x480_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
+extern void __init palm27x_lcd_init(int power,
+ struct pxafb_mode_info *mode);
+#else
+static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {}
+#endif
+
+#if defined(CONFIG_USB_GADGET_PXA27X) || \
+ defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+extern void __init palm27x_udc_init(int vbus, int pullup,
+ int vbus_inverted);
+#else
+static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
+#endif
+
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+extern void __init palm27x_irda_init(int pwdn);
+#else
+static inline void palm27x_irda_init(int pwdn) {}
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+ defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
+ int reset);
+#else
+static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
+#endif
+
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+extern void __init palm27x_pwm_init(int bl, int lcd);
+#else
+static inline void palm27x_pwm_init(int bl, int lcd) {}
+#endif
+
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+extern void __init palm27x_power_init(int ac, int usb);
+#else
+static inline void palm27x_power_init(int ac, int usb) {}
+#endif
+
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+extern void __init palm27x_pmic_init(void);
+#else
+static inline void palm27x_pmic_init(void) {}
+#endif
+
+#endif /* __INCLUDE_MACH_PALM27X__ */
--- /dev/null
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_PATA_PXA_H__
+#define __MACH_PATA_PXA_H__
+
+struct pata_pxa_pdata {
+ /* PXA DMA DREQ<0:2> pin */
+ uint32_t dma_dreq;
+ /* Register shift */
+ uint32_t reg_shift;
+ /* IRQ flags */
+ uint32_t irq_flags;
+};
+
+#endif /* __MACH_PATA_PXA_H__ */
+++ /dev/null
-/*
- * SharpSL SSP Driver
- */
-
-unsigned long corgi_ssp_ads7846_putget(unsigned long);
-unsigned long corgi_ssp_ads7846_get(void);
-void corgi_ssp_ads7846_put(unsigned long data);
-void corgi_ssp_ads7846_lock(void);
-void corgi_ssp_ads7846_unlock(void);
-void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
-void corgi_ssp_blduty_set(int duty);
-int corgi_ssp_max1111_get(unsigned long data);
-
-/*
- * SharpSL Touchscreen Driver
- */
-
-struct corgits_machinfo {
- unsigned long (*get_hsync_invperiod)(void);
- void (*put_hsync)(void);
- void (*wait_hsync)(void);
-};
-
-
-/*
- * SharpSL Backlight
- */
-extern void corgibl_limit_intensity(int limit);
-extern void corgi_lcd_limit_intensity(int limit);
-
-
-/*
- * SharpSL Battery/PM Driver
- */
-extern void sharpsl_battery_kick(void);
extern struct sharpsl_pm_status sharpsl_pm;
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
#define SHARPSL_LED_ERROR 2
#define SHARPSL_LED_ON 1
void sharpsl_battery_kick(void);
void sharpsl_pm_led(int val);
+/* MAX1111 Channel Definitions */
+#define MAX1111_BATT_VOLT 4u
+#define MAX1111_BATT_TEMP 2u
+#define MAX1111_ACIN_VOLT 6u
+int sharpsl_pm_pxa_read_max1111(int channel);
+
+void corgi_lcd_limit_intensity(int limit);
#endif
/*
* Shared data structures
*/
-extern struct platform_device spitzscoop_device;
-extern struct platform_device spitzscoop2_device;
extern struct platform_device spitzssp_device;
extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
#include <linux/irq.h>
#include <linux/pda_power.h>
#include <linux/power_supply.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/mtd/physmap.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/regulator/max1586.h>
},
};
-static struct wm97xx_batt_info mioa701_battery_data = {
+static struct wm97xx_batt_pdata mioa701_battery_data = {
.batt_aux = WM97XX_AUX_ID1,
.temp_aux = -1,
.charge_gpio = -1,
.batt_name = "mioa701_battery",
};
+static struct wm97xx_pdata mioa701_wm97xx_pdata = {
+ .batt_pdata = &mioa701_battery_data,
+};
+
/*
* Voltage regulation
*/
static pxa2xx_audio_ops_t mioa701_ac97_info = {
.reset_gpio = 95,
+ .codec_pdata = { &mioa701_wm97xx_pdata, },
};
/*
set_pxa_fb_info(&mioa701_pxafb_info);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
- wm97xx_bat_set_pdata(&mioa701_battery_data);
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
--- /dev/null
+/*
+ * Common code for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx.h>
+#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/regulator/max1586.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data palm27x_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .detect_delay_ms = 200,
+};
+
+void __init palm27x_mmc_init(int detect, int ro, int power,
+ int power_inverted)
+{
+ palm27x_mci_platform_data.gpio_card_detect = detect;
+ palm27x_mci_platform_data.gpio_card_ro = ro;
+ palm27x_mci_platform_data.gpio_power = power;
+ palm27x_mci_platform_data.gpio_power_invert = power_inverted;
+
+ pxa_set_mci_info(&palm27x_mci_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#if defined(CONFIG_SUSPEND)
+void __init palm27x_pm_init(unsigned long str_base)
+{
+ static const unsigned long resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /*
+ * Copy the bootloader.
+ * NOTE: PalmZ72 uses a different wakeup method!
+ */
+ memcpy(phys_to_virt(str_base), resume, sizeof(resume));
+}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+struct pxafb_mode_info palm_320x480_lcd_mode = {
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+};
+
+struct pxafb_mode_info palm_320x320_lcd_mode = {
+ .pixclock = 115384,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 27,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 6,
+ .vsync_len = 1,
+};
+
+struct pxafb_mode_info palm_320x320_new_lcd_mode = {
+ .pixclock = 86538,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 20,
+ .right_margin = 8,
+ .upper_margin = 8,
+ .lower_margin = 5,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+};
+
+static struct pxafb_mach_info palm27x_lcd_screen = {
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int palm27x_lcd_power;
+static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
+{
+ gpio_set_value(palm27x_lcd_power, on);
+}
+
+void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
+{
+ palm27x_lcd_screen.modes = mode;
+
+ if (gpio_is_valid(power)) {
+ if (!gpio_request(power, "LCD power")) {
+ pr_err("Palm27x: failed to claim lcd power gpio!\n");
+ return;
+ }
+ if (!gpio_direction_output(power, 1)) {
+ pr_err("Palm27x: lcd power configuration failed!\n");
+ return;
+ }
+ palm27x_lcd_power = power;
+ palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
+ }
+
+ set_pxa_fb_info(&palm27x_lcd_screen);
+}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_GADGET_PXA27X) || \
+ defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info palm27x_udc_info = {
+ .gpio_vbus_inverted = 1,
+};
+
+static struct platform_device palm27x_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palm27x_udc_info,
+ },
+};
+
+void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
+{
+ palm27x_udc_info.gpio_vbus = vbus;
+ palm27x_udc_info.gpio_pullup = pullup;
+
+ palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
+
+ if (!gpio_request(pullup, "USB Pullup")) {
+ gpio_direction_output(pullup,
+ palm27x_udc_info.gpio_vbus_inverted);
+ gpio_free(pullup);
+ } else
+ return;
+
+ platform_device_register(&palm27x_gpio_vbus);
+}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data palm27x_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+void __init palm27x_irda_init(int pwdn)
+{
+ palm27x_ficp_platform_data.gpio_pwdown = pwdn;
+ pxa_set_ficp_info(&palm27x_ficp_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * WM97xx audio, battery
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+ defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+static struct wm97xx_batt_pdata palm27x_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+static struct wm97xx_pdata palm27x_wm97xx_pdata = {
+ .batt_pdata = &palm27x_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
+ .codec_pdata = { &palm27x_wm97xx_pdata, },
+};
+
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+ .jack_gpio = -1,
+};
+
+static struct platform_device palm27x_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palm27x_asoc_pdata,
+ },
+};
+
+void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
+{
+ palm27x_ac97_pdata.reset_gpio = reset;
+ palm27x_asoc_pdata.jack_gpio = jack;
+
+ if (minv < 0 || maxv < 0) {
+ palm27x_ac97_pdata.codec_pdata[0] = NULL;
+ pxa_set_ac97_info(&palm27x_ac97_pdata);
+ } else {
+ palm27x_batt_pdata.min_voltage = minv,
+ palm27x_batt_pdata.max_voltage = maxv,
+
+ pxa_set_ac97_info(&palm27x_ac97_pdata);
+ platform_device_register(&palm27x_asoc);
+ }
+}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static int palm_bl_power;
+static int palm_lcd_power;
+
+static int palm27x_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(palm_bl_power, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(palm_bl_power, 0);
+ if (ret)
+ goto err2;
+
+ if (gpio_is_valid(palm_lcd_power)) {
+ ret = gpio_request(palm_lcd_power, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(palm_lcd_power, 0);
+ if (ret)
+ goto err3;
+ }
+
+ return 0;
+err3:
+ gpio_free(palm_lcd_power);
+err2:
+ gpio_free(palm_bl_power);
+err:
+ return ret;
+}
+
+static int palm27x_backlight_notify(struct device *dev, int brightness)
+{
+ gpio_set_value(palm_bl_power, brightness);
+ if (gpio_is_valid(palm_lcd_power))
+ gpio_set_value(palm_lcd_power, brightness);
+ return brightness;
+}
+
+static void palm27x_backlight_exit(struct device *dev)
+{
+ gpio_free(palm_bl_power);
+ if (gpio_is_valid(palm_lcd_power))
+ gpio_free(palm_lcd_power);
+}
+
+static struct platform_pwm_backlight_data palm27x_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 0xfe,
+ .dft_brightness = 0x7e,
+ .pwm_period_ns = 3500,
+ .init = palm27x_backlight_init,
+ .notify = palm27x_backlight_notify,
+ .exit = palm27x_backlight_exit,
+};
+
+static struct platform_device palm27x_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palm27x_backlight_data,
+ },
+};
+
+void __init palm27x_pwm_init(int bl, int lcd)
+{
+ palm_bl_power = bl;
+ palm_lcd_power = lcd;
+ platform_device_register(&palm27x_backlight);
+}
+#endif
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+static int palm_ac_state;
+static int palm_usb_state;
+
+static int palm27x_power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(palm_ac_state, "AC state");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(palm_ac_state);
+ if (ret)
+ goto err2;
+
+ if (gpio_is_valid(palm_usb_state)) {
+ ret = gpio_request(palm_usb_state, "USB state");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_input(palm_usb_state);
+ if (ret)
+ goto err3;
+ }
+
+ return 0;
+err3:
+ gpio_free(palm_usb_state);
+err2:
+ gpio_free(palm_ac_state);
+err1:
+ return ret;
+}
+
+static void palm27x_power_supply_exit(struct device *dev)
+{
+ gpio_free(palm_usb_state);
+ gpio_free(palm_ac_state);
+}
+
+static int palm27x_is_ac_online(void)
+{
+ return gpio_get_value(palm_ac_state);
+}
+
+static int palm27x_is_usb_online(void)
+{
+ return !gpio_get_value(palm_usb_state);
+}
+static char *palm27x_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata palm27x_ps_info = {
+ .init = palm27x_power_supply_init,
+ .exit = palm27x_power_supply_exit,
+ .is_ac_online = palm27x_is_ac_online,
+ .is_usb_online = palm27x_is_usb_online,
+ .supplied_to = palm27x_supplicants,
+ .num_supplicants = ARRAY_SIZE(palm27x_supplicants),
+};
+
+static struct platform_device palm27x_power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &palm27x_ps_info,
+ },
+};
+
+void __init palm27x_power_init(int ac, int usb)
+{
+ palm_ac_state = ac;
+ palm_usb_state = usb;
+ platform_device_register(&palm27x_power_supply);
+}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
+ {
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data palm27x_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = palm27x_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(palm27x_max1587a_consumers),
+};
+
+static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &palm27x_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data palm27x_max1587a_info = {
+ .subdevs = palm27x_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &palm27x_max1587a_info,
+ },
+};
+
+void __init palm27x_pmic_init(void)
+{
+ i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
+ pxa27x_set_i2c_power_info(NULL);
+}
+#endif
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/sysdev.h>
#include <linux/mtd/mtd.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* NOR Flash
******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition palmld_partitions[] = {
{
.name = "Flash",
},
};
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmld_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_PALMLD_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_PALMLD_SD_READONLY,
- .gpio_power = GPIO_NR_PALMLD_SD_POWER,
- .detect_delay_ms = 200,
-};
+static void __init palmld_nor_init(void)
+{
+ platform_device_register(&palmld_flash);
+}
+#else
+static inline void palmld_nor_init(void) {}
+#endif
/******************************************************************************
* GPIO keyboard
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int palmld_matrix_keys[] = {
KEY(0, 1, KEY_F2),
KEY(0, 2, KEY_UP),
.debounce_interval = 30,
};
+static void __init palmld_kpc_init(void)
+{
+ pxa_set_keypad_info(&palmld_keypad_platform_data);
+}
+#else
+static inline void palmld_kpc_init(void) {}
+#endif
+
/******************************************************************************
* GPIO keys
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button palmld_pxa_buttons[] = {
{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
},
};
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmld_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0);
- if (ret)
- goto err2;
- ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMLD_LCD_POWER);
-err2:
- gpio_free(GPIO_NR_PALMLD_BL_POWER);
-err:
- return ret;
-}
-
-static int palmld_backlight_notify(struct device *dev, int brightness)
+static void __init palmld_keys_init(void)
{
- gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
- gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
- return brightness;
+ platform_device_register(&palmld_pxa_keys);
}
-
-static void palmld_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMLD_BL_POWER);
- gpio_free(GPIO_NR_PALMLD_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmld_backlight_data = {
- .pwm_id = 0,
- .max_brightness = PALMLD_MAX_INTENSITY,
- .dft_brightness = PALMLD_MAX_INTENSITY,
- .pwm_period_ns = PALMLD_PERIOD_NS,
- .init = palmld_backlight_init,
- .notify = palmld_backlight_notify,
- .exit = palmld_backlight_exit,
-};
-
-static struct platform_device palmld_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &palmld_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmld_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMLD_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
+#else
+static inline void palmld_keys_init(void) {}
+#endif
/******************************************************************************
* LEDs
******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
struct gpio_led gpio_leds[] = {
{
.name = "palmld:green:led",
}
};
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB");
- if (ret)
- goto err2;
- ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N);
- if (ret)
- goto err3;
-
- return 0;
-
-err3:
- gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
-err2:
- gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int palmld_is_ac_online(void)
+static void __init palmld_leds_init(void)
{
- return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT);
+ platform_device_register(&palmld_leds);
}
-
-static int palmld_is_usb_online(void)
-{
- return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N);
-}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
- gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
-}
-
-static char *palmld_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = palmld_is_ac_online,
- .is_usb_online = palmld_is_usb_online,
- .exit = power_supply_exit,
- .supplied_to = palmld_supplicants,
- .num_supplicants = ARRAY_SIZE(palmld_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
- .batt_aux = WM97XX_AUX_ID3,
- .temp_aux = WM97XX_AUX_ID2,
- .charge_gpio = -1,
- .max_voltage = PALMLD_BAT_MAX_VOLTAGE,
- .min_voltage = PALMLD_BAT_MIN_VOLTAGE,
- .batt_mult = 1000,
- .batt_div = 414,
- .temp_mult = 1,
- .temp_div = 1,
- .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .batt_name = "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmld_asoc_pdata = {
- .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmld_ac97_pdata = {
- .reset_gpio = 95,
-};
-
-static struct platform_device palmld_asoc = {
- .name = "palm27x-asoc",
- .id = -1,
- .dev = {
- .platform_data = &palmld_asoc_pdata,
- },
-};
+#else
+static inline void palmld_leds_init(void) {}
+#endif
/******************************************************************************
* HDD
******************************************************************************/
-static struct platform_device palmld_hdd = {
+#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
+static struct platform_device palmld_ide_device = {
.name = "pata_palmld",
.id = -1,
};
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmld_lcd_modes[] = {
-{
- .pixclock = 57692,
- .xres = 320,
- .yres = 480,
- .bpp = 16,
-
- .left_margin = 32,
- .right_margin = 1,
- .upper_margin = 7,
- .lower_margin = 1,
-
- .hsync_len = 4,
- .vsync_len = 1,
-},
-};
-
-static struct pxafb_mach_info palmld_lcd_screen = {
- .modes = palmld_lcd_modes,
- .num_modes = ARRAY_SIZE(palmld_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmld_pm_init(void)
+static void __init palmld_ide_init(void)
{
- static u32 resume[] = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
- };
-
- /* copy the bootloader */
- memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume));
+ platform_device_register(&palmld_ide_device);
}
+#else
+static inline void palmld_ide_init(void) {}
+#endif
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
- &palmld_pxa_keys,
-#endif
- &palmld_backlight,
- &palmld_leds,
- &power_supply,
- &palmld_asoc,
- &palmld_hdd,
- &palmld_flash,
-};
-
static struct map_desc palmld_io_desc[] __initdata = {
{
.virtual = PALMLD_IDE_VIRT,
static void __init palmld_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
-
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- palmld_pm_init();
- set_pxa_fb_info(&palmld_lcd_screen);
- pxa_set_mci_info(&palmld_mci_platform_data);
- pxa_set_ac97_info(&palmld_ac97_pdata);
- pxa_set_ficp_info(&palmld_ficp_platform_data);
- pxa_set_keypad_info(&palmld_keypad_platform_data);
- wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ palm27x_mmc_init(GPIO_NR_PALMLD_SD_DETECT_N, GPIO_NR_PALMLD_SD_READONLY,
+ GPIO_NR_PALMLD_SD_POWER, 0);
+ palm27x_pm_init(PALMLD_STR_BASE);
+ palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+ palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
+ palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
+ GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
+ palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
+ palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT,
+ GPIO_NR_PALMLD_USB_DETECT_N);
+ palm27x_pmic_init();
+ palmld_kpc_init();
+ palmld_keys_init();
+ palmld_nor_init();
+ palmld_leds_init();
+ palmld_ide_init();
}
MACHINE_START(PALMLD, "Palm LifeDrive")
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
#include "generic.h"
#include "devices.h"
GPIO107_GPIO, /* earphone detect */
};
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmt5_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_PALMT5_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_PALMT5_SD_READONLY,
- .gpio_power = GPIO_NR_PALMT5_SD_POWER,
- .detect_delay_ms = 200,
-};
-
/******************************************************************************
* GPIO keyboard
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int palmt5_matrix_keys[] = {
KEY(0, 0, KEY_POWER),
KEY(0, 1, KEY_F1),
.debounce_interval = 30,
};
+static void __init palmt5_kpc_init(void)
+{
+ pxa_set_keypad_info(&palmt5_keypad_platform_data);
+}
+#else
+static inline void palmt5_kpc_init(void) {}
+#endif
+
/******************************************************************************
* GPIO keys
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button palmt5_pxa_buttons[] = {
{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
};
},
};
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmt5_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
- if (ret)
- goto err2;
- ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMT5_LCD_POWER);
-err2:
- gpio_free(GPIO_NR_PALMT5_BL_POWER);
-err:
- return ret;
-}
-
-static int palmt5_backlight_notify(struct device *dev, int brightness)
-{
- gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
- gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
- return brightness;
-}
-
-static void palmt5_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMT5_BL_POWER);
- gpio_free(GPIO_NR_PALMT5_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmt5_backlight_data = {
- .pwm_id = 0,
- .max_brightness = PALMT5_MAX_INTENSITY,
- .dft_brightness = PALMT5_MAX_INTENSITY,
- .pwm_period_ns = PALMT5_PERIOD_NS,
- .init = palmt5_backlight_init,
- .notify = palmt5_backlight_notify,
- .exit = palmt5_backlight_exit,
-};
-
-static struct platform_device palmt5_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &palmt5_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmt5_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMT5_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmt5_udc_info = {
- .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
- .gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP,
-};
-
-static struct platform_device palmt5_gpio_vbus = {
- .name = "gpio-vbus",
- .id = -1,
- .dev = {
- .platform_data = &palmt5_udc_info,
- },
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
- if (ret)
- goto err2;
-
- return 0;
-err2:
- gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int palmt5_is_ac_online(void)
-{
- return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
-}
-
-static char *palmt5_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = palmt5_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = palmt5_supplicants,
- .num_supplicants = ARRAY_SIZE(palmt5_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
- .batt_aux = WM97XX_AUX_ID3,
- .temp_aux = WM97XX_AUX_ID2,
- .charge_gpio = -1,
- .max_voltage = PALMT5_BAT_MAX_VOLTAGE,
- .min_voltage = PALMT5_BAT_MIN_VOLTAGE,
- .batt_mult = 1000,
- .batt_div = 414,
- .temp_mult = 1,
- .temp_div = 1,
- .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .batt_name = "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmt5_asoc_pdata = {
- .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
- .reset_gpio = 95,
-};
-
-static struct platform_device palmt5_asoc = {
- .name = "palm27x-asoc",
- .id = -1,
- .dev = {
- .platform_data = &palmt5_asoc_pdata,
- },
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmt5_lcd_modes[] = {
-{
- .pixclock = 57692,
- .xres = 320,
- .yres = 480,
- .bpp = 16,
-
- .left_margin = 32,
- .right_margin = 1,
- .upper_margin = 7,
- .lower_margin = 1,
-
- .hsync_len = 4,
- .vsync_len = 1,
-},
-};
-
-static struct pxafb_mach_info palmt5_lcd_screen = {
- .modes = palmt5_lcd_modes,
- .num_modes = ARRAY_SIZE(palmt5_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmt5_pm_init(void)
+static void __init palmt5_keys_init(void)
{
- static u32 resume[] = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
- };
-
- /* copy the bootloader */
- memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
+ platform_device_register(&palmt5_pxa_keys);
}
+#else
+static inline void palmt5_keys_init(void) {}
+#endif
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
- &palmt5_pxa_keys,
-#endif
- &palmt5_backlight,
- &power_supply,
- &palmt5_asoc,
- &palmt5_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmt5_udc_init(void)
-{
- if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
- gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
- }
-}
-
static void __init palmt5_reserve(void)
{
memblock_reserve(0xa0200000, 0x1000);
static void __init palmt5_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
-
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- palmt5_pm_init();
- set_pxa_fb_info(&palmt5_lcd_screen);
- pxa_set_mci_info(&palmt5_mci_platform_data);
- palmt5_udc_init();
- pxa_set_ac97_info(&palmt5_ac97_pdata);
- pxa_set_ficp_info(&palmt5_ficp_platform_data);
- pxa_set_keypad_info(&palmt5_keypad_platform_data);
- wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ palm27x_mmc_init(GPIO_NR_PALMT5_SD_DETECT_N, GPIO_NR_PALMT5_SD_READONLY,
+ GPIO_NR_PALMT5_SD_POWER, 0);
+ palm27x_pm_init(PALMT5_STR_BASE);
+ palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+ palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
+ GPIO_NR_PALMT5_USB_PULLUP, 1);
+ palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
+ palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
+ GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
+ palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
+ palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1);
+ palm27x_pmic_init();
+ palmt5_kpc_init();
+ palmt5_keys_init();
}
MACHINE_START(PALMT5, "Palm Tungsten|T5")
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
};
/******************************************************************************
- * WM97xx battery
+ * WM97xx audio, battery
******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
+static struct wm97xx_batt_pdata palmte2_batt_pdata = {
.batt_aux = WM97XX_AUX_ID3,
.temp_aux = WM97XX_AUX_ID2,
.charge_gpio = -1,
.batt_name = "main-batt",
};
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
+static struct wm97xx_pdata palmte2_wm97xx_pdata = {
+ .batt_pdata = &palmte2_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
+ .codec_pdata = { &palmte2_wm97xx_pdata, },
+};
+
static struct palm27x_asoc_info palmte2_asoc_pdata = {
.jack_gpio = GPIO_NR_PALMTE2_EARPHONE_DETECT,
};
set_pxa_fb_info(&palmte2_lcd_screen);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
- pxa_set_ac97_info(NULL);
+ pxa_set_ac97_info(&palmte2_ac97_pdata);
pxa_set_ficp_info(&palmte2_ficp_platform_data);
- wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <linux/sysdev.h>
#include <linux/w1-gpio.h>
#include <mach/pxa2xx-regs.h>
#include <mach/palmasoc.h>
#include <mach/camera.h>
+#include <mach/palm27x.h>
#include <sound/pxa2xx-lib.h>
};
#endif /* CONFIG_MACH_CENTRO */
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
-static struct pxamci_platform_data treo680_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_TREO680_SD_READONLY,
- .gpio_power = GPIO_NR_TREO680_SD_POWER,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static struct pxamci_platform_data centro_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N,
- .gpio_card_ro = -1,
- .gpio_power = GPIO_NR_CENTRO_SD_POWER,
- .gpio_power_invert = 1,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
/******************************************************************************
* GPIO keyboard
******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int treo680_matrix_keys[] = {
KEY(0, 0, KEY_F8), /* Red/Off/Power */
KEY(0, 1, KEY_LEFT),
KEY(7, 5, KEY_I),
};
-static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
- .matrix_key_rows = 8,
- .matrix_key_cols = 7,
- .matrix_key_map = treo680_matrix_keys,
- .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys),
- .direct_key_map = { KEY_CONNECT },
- .direct_key_num = 1,
-
- .debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
static unsigned int centro_matrix_keys[] = {
KEY(0, 0, KEY_F9), /* Home */
KEY(0, 1, KEY_LEFT),
KEY(7, 5, KEY_I),
};
-static struct pxa27x_keypad_platform_data centro_keypad_platform_data = {
+static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
.matrix_key_rows = 8,
.matrix_key_cols = 7,
- .matrix_key_map = centro_matrix_keys,
- .matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys),
+ .matrix_key_map = treo680_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys),
.direct_key_map = { KEY_CONNECT },
.direct_key_num = 1,
.debounce_interval = 30,
};
-#endif /* CONFIG_MACH_CENTRO */
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-
-static pxa2xx_audio_ops_t treo_ac97_pdata = {
- .reset_gpio = 95,
-};
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int treo_backlight_init(struct device *dev)
+static void __init palmtreo_kpc_init(void)
{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0);
- if (ret)
- goto err2;
-
- return 0;
+ static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
-err2:
- gpio_free(GPIO_NR_TREO_BL_POWER);
-err:
- return ret;
-}
-
-static int treo_backlight_notify(struct device *dev, int brightness)
-{
- gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
- return TREO_MAX_INTENSITY - brightness;
-};
+ if (machine_is_centro()) {
+ data->matrix_key_map = centro_matrix_keys;
+ data->matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys);
+ }
-static void treo_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_TREO_BL_POWER);
+ pxa_set_keypad_info(&treo680_keypad_pdata);
}
-
-static struct platform_pwm_backlight_data treo_backlight_data = {
- .pwm_id = 0,
- .max_brightness = TREO_MAX_INTENSITY,
- .dft_brightness = TREO_DEFAULT_INTENSITY,
- .pwm_period_ns = TREO_PERIOD_NS,
- .init = treo_backlight_init,
- .notify = treo_backlight_notify,
- .exit = treo_backlight_exit,
-};
-
-static struct platform_device treo_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &treo_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data treo_ficp_info = {
- .gpio_pwdown = GPIO_NR_TREO_IR_EN,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct pxa2xx_udc_mach_info treo_udc_info __initdata = {
- .gpio_vbus = GPIO_NR_TREO_USB_DETECT,
- .gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_TREO_USB_PULLUP,
-};
-
+#else
+static inline void palmtreo_kpc_init(void) {}
+#endif
/******************************************************************************
* USB host
******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static struct pxaohci_platform_data treo680_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT3,
.power_budget = 0,
};
-#endif /* CONFIG_MACH_TREO680 */
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
+static void __init palmtreo_uhc_init(void)
{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT);
- if (ret)
- goto err2;
-
- return 0;
-
-err2:
- gpio_free(GPIO_NR_TREO_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int treo_is_ac_online(void)
-{
- return gpio_get_value(GPIO_NR_TREO_POWER_DETECT);
+ if (machine_is_treo680())
+ pxa_set_ohci_info(&treo680_ohci_info);
}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_TREO_POWER_DETECT);
-}
-
-static char *treo_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = treo_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = treo_supplicants,
- .num_supplicants = ARRAY_SIZE(treo_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
+#else
+static inline void palmtreo_uhc_init(void) {}
+#endif
/******************************************************************************
* Vibra and LEDs
.num_leds = ARRAY_SIZE(treo680_gpio_leds),
};
-static struct platform_device treo680_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &treo680_gpio_led_info,
- }
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
static struct gpio_led centro_gpio_leds[] = {
{
.name = "centro:vibra:vibra",
.num_leds = ARRAY_SIZE(centro_gpio_leds),
};
-static struct platform_device centro_leds = {
+static struct platform_device palmtreo_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
- .platform_data = ¢ro_gpio_led_info,
+ .platform_data = &treo680_gpio_led_info,
}
};
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-/* TODO: add support for 324x324 */
-static struct pxafb_mode_info treo_lcd_modes[] = {
-{
- .pixclock = 86538,
- .xres = 320,
- .yres = 320,
- .bpp = 16,
-
- .left_margin = 20,
- .right_margin = 8,
- .upper_margin = 8,
- .lower_margin = 5,
-
- .hsync_len = 4,
- .vsync_len = 1,
-},
-};
-static void treo_lcd_power(int on, struct fb_var_screeninfo *info)
+static void __init palmtreo_leds_init(void)
{
- gpio_set_value(GPIO_NR_TREO_BL_POWER, on);
-}
-
-static struct pxafb_mach_info treo_lcd_screen = {
- .modes = treo_lcd_modes,
- .num_modes = ARRAY_SIZE(treo_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+ if (machine_is_centro())
+ palmtreo_leds.dev.platform_data = ¢ro_gpio_led_info;
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init treo_pm_init(void)
-{
- static u32 resume[] = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
- };
-
- /* this is where the bootloader jumps */
- memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume));
+ platform_device_register(&palmtreo_leds);
}
+#else
+static inline void palmtreo_leds_init(void) {}
+#endif
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *treo_devices[] __initdata = {
- &treo_backlight,
- &power_supply,
-};
-
-#ifdef CONFIG_MACH_TREO680
-static struct platform_device *treo680_devices[] __initdata = {
- &treo680_leds,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static struct platform_device *centro_devices[] __initdata = {
- ¢ro_leds,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/* setup udc GPIOs initial state */
-static void __init treo_udc_init(void)
-{
- if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1);
- gpio_free(GPIO_NR_TREO_USB_PULLUP);
- }
-}
-
-static void __init treo_lcd_power_init(void)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER");
- if (ret) {
- pr_err("Treo680: LCD power GPIO request failed!\n");
- return;
- }
-
- ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0);
- if (ret) {
- pr_err("Treo680: setting LCD power GPIO direction failed!\n");
- gpio_free(GPIO_NR_TREO_LCD_POWER);
- return;
- }
-
- treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
-}
-
static void __init treo_reserve(void)
{
memblock_reserve(0xa0000000, 0x1000);
memblock_reserve(0xa2000000, 0x1000);
}
-static void __init treo_init(void)
+static void __init palmphone_common_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
-
- treo_pm_init();
- pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
- treo_lcd_power_init();
- set_pxa_fb_info(&treo_lcd_screen);
- treo_udc_init();
- pxa_set_udc_info(&treo_udc_info);
- pxa_set_ac97_info(&treo_ac97_pdata);
- pxa_set_ficp_info(&treo_ficp_info);
-
- platform_add_devices(ARRAY_AND_SIZE(treo_devices));
+ palm27x_pm_init(TREO_STR_BASE);
+ palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
+ palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
+ palm27x_irda_init(GPIO_NR_TREO_IR_EN);
+ palm27x_ac97_init(-1, -1, -1, 95);
+ palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
+ palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
+ palm27x_pmic_init();
+ palmtreo_kpc_init();
+ palmtreo_uhc_init();
+ palmtreo_leds_init();
}
-#ifdef CONFIG_MACH_TREO680
static void __init treo680_init(void)
{
- treo_init();
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
- pxa_set_mci_info(&treo680_mci_platform_data);
- pxa_set_keypad_info(&treo680_keypad_platform_data);
- pxa_set_ohci_info(&treo680_ohci_info);
+ palmphone_common_init();
+ palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
+ GPIO_NR_TREO680_SD_POWER, 0);
+}
- platform_add_devices(ARRAY_AND_SIZE(treo680_devices));
+static void __init centro_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+ palmphone_common_init();
+ palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
+ GPIO_NR_CENTRO_SD_POWER, 1);
}
MACHINE_START(TREO680, "Palm Treo 680")
.timer = &pxa_timer,
.init_machine = treo680_init,
MACHINE_END
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static void __init centro_init(void)
-{
- treo_init();
- pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
- pxa_set_mci_info(¢ro_mci_platform_data);
-
- pxa_set_keypad_info(¢ro_keypad_platform_data);
-
- platform_add_devices(ARRAY_AND_SIZE(centro_devices));
-}
MACHINE_START(CENTRO, "Palm Centro 685")
.phys_io = TREO_PHYS_IO_START,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
- .init_machine = centro_init,
+ .init_machine = centro_init,
MACHINE_END
-#endif /* CONFIG_MACH_CENTRO */
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/mtd/nand.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* NOR Flash
******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition palmtx_partitions[] = {
{
.name = "Flash",
},
};
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmtx_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_PALMTX_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_PALMTX_SD_READONLY,
- .gpio_power = GPIO_NR_PALMTX_SD_POWER,
- .detect_delay_ms = 200,
-};
+static void __init palmtx_nor_init(void)
+{
+ platform_device_register(&palmtx_flash);
+}
+#else
+static inline void palmtx_nor_init(void) {}
+#endif
/******************************************************************************
* GPIO keyboard
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int palmtx_matrix_keys[] = {
KEY(0, 0, KEY_POWER),
KEY(0, 1, KEY_F1),
.debounce_interval = 30,
};
+static void __init palmtx_kpc_init(void)
+{
+ pxa_set_keypad_info(&palmtx_keypad_platform_data);
+}
+#else
+static inline void palmtx_kpc_init(void) {}
+#endif
+
/******************************************************************************
* GPIO keys
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button palmtx_pxa_buttons[] = {
{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
};
},
};
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmtx_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
- if (ret)
- goto err2;
- ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMTX_LCD_POWER);
-err2:
- gpio_free(GPIO_NR_PALMTX_BL_POWER);
-err:
- return ret;
-}
-
-static int palmtx_backlight_notify(struct device *dev, int brightness)
-{
- gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
- gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
- return brightness;
-}
-
-static void palmtx_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMTX_BL_POWER);
- gpio_free(GPIO_NR_PALMTX_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmtx_backlight_data = {
- .pwm_id = 0,
- .max_brightness = PALMTX_MAX_INTENSITY,
- .dft_brightness = PALMTX_MAX_INTENSITY,
- .pwm_period_ns = PALMTX_PERIOD_NS,
- .init = palmtx_backlight_init,
- .notify = palmtx_backlight_notify,
- .exit = palmtx_backlight_exit,
-};
-
-static struct platform_device palmtx_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &palmtx_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmtx_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMTX_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmtx_udc_info = {
- .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
- .gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP,
-};
-
-static struct platform_device palmtx_gpio_vbus = {
- .name = "gpio-vbus",
- .id = -1,
- .dev = {
- .platform_data = &palmtx_udc_info,
- },
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
- if (ret)
- goto err2;
-
- return 0;
-
-err2:
- gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int palmtx_is_ac_online(void)
-{
- return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
+static void __init palmtx_keys_init(void)
{
- gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+ platform_device_register(&palmtx_pxa_keys);
}
-
-static char *palmtx_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = palmtx_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = palmtx_supplicants,
- .num_supplicants = ARRAY_SIZE(palmtx_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
- .batt_aux = WM97XX_AUX_ID3,
- .temp_aux = WM97XX_AUX_ID2,
- .charge_gpio = -1,
- .max_voltage = PALMTX_BAT_MAX_VOLTAGE,
- .min_voltage = PALMTX_BAT_MIN_VOLTAGE,
- .batt_mult = 1000,
- .batt_div = 414,
- .temp_mult = 1,
- .temp_div = 1,
- .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .batt_name = "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmtx_asoc_pdata = {
- .jack_gpio = GPIO_NR_PALMTX_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
- .reset_gpio = 95,
-};
-
-static struct platform_device palmtx_asoc = {
- .name = "palm27x-asoc",
- .id = -1,
- .dev = {
- .platform_data = &palmtx_asoc_pdata,
- },
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmtx_lcd_modes[] = {
-{
- .pixclock = 57692,
- .xres = 320,
- .yres = 480,
- .bpp = 16,
-
- .left_margin = 32,
- .right_margin = 1,
- .upper_margin = 7,
- .lower_margin = 1,
-
- .hsync_len = 4,
- .vsync_len = 1,
-},
-};
-
-static struct pxafb_mach_info palmtx_lcd_screen = {
- .modes = palmtx_lcd_modes,
- .num_modes = ARRAY_SIZE(palmtx_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+#else
+static inline void palmtx_keys_init(void) {}
+#endif
/******************************************************************************
* NAND Flash
******************************************************************************/
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
}
};
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmtx_pm_init(void)
+static void __init palmtx_nand_init(void)
{
- static u32 resume[] = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
- };
-
- /* copy the bootloader */
- memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume));
+ platform_device_register(&palmtx_nand);
}
+#else
+static inline void palmtx_nand_init(void) {}
+#endif
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
- &palmtx_pxa_keys,
-#endif
- &palmtx_backlight,
- &power_supply,
- &palmtx_asoc,
- &palmtx_gpio_vbus,
- &palmtx_flash,
- &palmtx_nand,
-};
-
static struct map_desc palmtx_io_desc[] __initdata = {
{
.virtual = PALMTX_PCMCIA_VIRT,
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
-/* setup udc GPIOs initial state */
-static void __init palmtx_udc_init(void)
-{
- if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
- gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
- }
-}
-
-
static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
-
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- palmtx_pm_init();
- set_pxa_fb_info(&palmtx_lcd_screen);
- pxa_set_mci_info(&palmtx_mci_platform_data);
- palmtx_udc_init();
- pxa_set_ac97_info(&palmtx_ac97_pdata);
- pxa_set_ficp_info(&palmtx_ficp_platform_data);
- pxa_set_keypad_info(&palmtx_keypad_platform_data);
- wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ palm27x_mmc_init(GPIO_NR_PALMTX_SD_DETECT_N, GPIO_NR_PALMTX_SD_READONLY,
+ GPIO_NR_PALMTX_SD_POWER, 0);
+ palm27x_pm_init(PALMTX_STR_BASE);
+ palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+ palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
+ GPIO_NR_PALMTX_USB_PULLUP, 1);
+ palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
+ palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
+ GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
+ palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
+ palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
+ palm27x_pmic_init();
+ palmtx_kpc_init();
+ palmtx_keys_init();
+ palmtx_nor_init();
+ palmtx_nand_init();
}
MACHINE_START(PALMTX, "Palm T|X")
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
#include <mach/pm.h>
GPIO27_GPIO, /* WM9712 IRQ */
};
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-/* SD_POWER is not actually power, but it is more like chip
- * select, i.e. it is inverted */
-static struct pxamci_platform_data palmz72_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_PALMZ72_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_PALMZ72_SD_RO,
- .gpio_power = GPIO_NR_PALMZ72_SD_POWER_N,
- .gpio_power_invert = 1,
-};
-
/******************************************************************************
* GPIO keyboard
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int palmz72_matrix_keys[] = {
KEY(0, 0, KEY_POWER),
KEY(0, 1, KEY_F1),
.debounce_interval = 30,
};
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmz72_backlight_init(struct device *dev)
+static void __init palmz72_kpc_init(void)
{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
- if (ret)
- goto err2;
- ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
-err2:
- gpio_free(GPIO_NR_PALMZ72_BL_POWER);
-err:
- return ret;
-}
-
-static int palmz72_backlight_notify(struct device *dev, int brightness)
-{
- gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
- gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
- return brightness;
-}
-
-static void palmz72_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMZ72_BL_POWER);
- gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+ pxa_set_keypad_info(&palmz72_keypad_platform_data);
}
-
-static struct platform_pwm_backlight_data palmz72_backlight_data = {
- .pwm_id = 0,
- .max_brightness = PALMZ72_MAX_INTENSITY,
- .dft_brightness = PALMZ72_MAX_INTENSITY,
- .pwm_period_ns = PALMZ72_PERIOD_NS,
- .init = palmz72_backlight_init,
- .notify = palmz72_backlight_notify,
- .exit = palmz72_backlight_exit,
-};
-
-static struct platform_device palmz72_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &palmz72_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmz72_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMZ72_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
+#else
+static inline void palmz72_kpc_init(void) {}
+#endif
/******************************************************************************
* LEDs
******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led gpio_leds[] = {
{
.name = "palmz72:green:led",
}
};
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmz72_udc_info = {
- .gpio_vbus = GPIO_NR_PALMZ72_USB_DETECT_N,
- .gpio_pullup = GPIO_NR_PALMZ72_USB_PULLUP,
-};
-
-static struct platform_device palmz72_gpio_vbus = {
- .name = "gpio-vbus",
- .id = -1,
- .dev = {
- .platform_data = &palmz72_udc_info,
- },
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB");
- if (ret)
- goto err2;
- ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
-err2:
- gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int palmz72_is_ac_online(void)
-{
- return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
-}
-
-static int palmz72_is_usb_online(void)
+static void __init palmz72_leds_init(void)
{
- return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
+ platform_device_register(&palmz72_leds);
}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
- gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
-}
-
-static char *palmz72_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = palmz72_is_ac_online,
- .is_usb_online = palmz72_is_usb_online,
- .exit = power_supply_exit,
- .supplied_to = palmz72_supplicants,
- .num_supplicants = ARRAY_SIZE(palmz72_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
- .batt_aux = WM97XX_AUX_ID3,
- .temp_aux = WM97XX_AUX_ID2,
- .charge_gpio = -1,
- .max_voltage = PALMZ72_BAT_MAX_VOLTAGE,
- .min_voltage = PALMZ72_BAT_MIN_VOLTAGE,
- .batt_mult = 1000,
- .batt_div = 414,
- .temp_mult = 1,
- .temp_div = 1,
- .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .batt_name = "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct platform_device palmz72_asoc = {
- .name = "palm27x-asoc",
- .id = -1,
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmz72_lcd_modes[] = {
-{
- .pixclock = 115384,
- .xres = 320,
- .yres = 320,
- .bpp = 16,
-
- .left_margin = 27,
- .right_margin = 7,
- .upper_margin = 7,
- .lower_margin = 8,
-
- .hsync_len = 6,
- .vsync_len = 1,
-},
-};
-
-static struct pxafb_mach_info palmz72_lcd_screen = {
- .modes = palmz72_lcd_modes,
- .num_modes = ARRAY_SIZE(palmz72_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+#else
+static inline void palmz72_leds_init(void) {}
+#endif
#ifdef CONFIG_PM
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *devices[] __initdata = {
- &palmz72_backlight,
- &palmz72_leds,
- &palmz72_asoc,
- &power_supply,
- &palmz72_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmz72_udc_init(void)
-{
- if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) {
- gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0);
- gpio_free(GPIO_NR_PALMZ72_USB_PULLUP);
- }
-}
-
static void __init palmz72_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
-
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- set_pxa_fb_info(&palmz72_lcd_screen);
- pxa_set_mci_info(&palmz72_mci_platform_data);
- palmz72_udc_init();
- pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&palmz72_ficp_platform_data);
- pxa_set_keypad_info(&palmz72_keypad_platform_data);
- wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ palm27x_mmc_init(GPIO_NR_PALMZ72_SD_DETECT_N, GPIO_NR_PALMZ72_SD_RO,
+ GPIO_NR_PALMZ72_SD_POWER_N, 1);
+ palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
+ palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
+ GPIO_NR_PALMZ72_USB_PULLUP, 0);
+ palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
+ palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
+ -1, 113);
+ palm27x_pwm_init(-1, -1);
+ palm27x_power_init(-1, -1);
+ palm27x_pmic_init();
+ palmz72_kpc_init();
+ palmz72_leds_init();
}
MACHINE_START(PALMZ72, "Palm Zire72")
#include <mach/irda.h>
#include <mach/poodle.h>
#include <mach/pxafb.h>
-#include <mach/sharpsl.h>
#include <mach/pxa2xx_spi.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
-#include "sharpsl.h"
static unsigned long poodle_pin_config[] __initdata = {
/* I/O */
static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_udc,
+ &pxa_device_pmu,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa25x_device_ssp,
static struct platform_device *devices[] __initdata = {
&pxa27x_device_udc,
+ &pxa_device_pmu,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa_device_rtc,
static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
/* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 0 };
+static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
/*
* Get the clock frequency as reflected by CCSR and the turbo flag.
PECR |= PECR_IE(irq - IRQ_WAKEUP0);
}
+static int pxa_set_ext_wakeup_type(unsigned int irq, unsigned int flow_type)
+{
+ if (flow_type & IRQ_TYPE_EDGE_RISING)
+ PWER |= 1 << (irq - IRQ_WAKEUP0);
+
+ if (flow_type & IRQ_TYPE_EDGE_FALLING)
+ PWER |= 1 << (irq - IRQ_WAKEUP0 + 2);
+
+ return 0;
+}
+
static struct irq_chip pxa_ext_wakeup_chip = {
.name = "WAKEUP",
.ack = pxa_ack_ext_wakeup,
.mask = pxa_mask_ext_wakeup,
.unmask = pxa_unmask_ext_wakeup,
+ .set_type = pxa_set_ext_wakeup_type,
};
static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
static struct platform_device *devices[] __initdata = {
&pxa27x_device_udc,
+ &pxa_device_pmu,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa_device_rtc,
static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
+static void raumfeld_power_signal_charged(void)
+{
+ struct power_supply *psy =
+ power_supply_get_by_name(raumfeld_power_supplicants[0]);
+
+ if (psy)
+ power_supply_set_battery_charged(psy);
+}
+
+static int raumfeld_power_resume(void)
+{
+ /* check if GPIO_CHARGE_DONE went low while we were sleeping */
+ if (!gpio_get_value(GPIO_CHARGE_DONE))
+ raumfeld_power_signal_charged();
+
+ return 0;
+}
+
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = raumfeld_is_ac_online,
.is_usb_online = raumfeld_is_usb_online,
.exit = power_supply_exit,
.supplied_to = raumfeld_power_supplicants,
- .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants)
+ .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants),
+ .resume = raumfeld_power_resume,
};
static struct resource power_supply_resources[] = {
static irqreturn_t charge_done_irq(int irq, void *dev_id)
{
- struct power_supply *psy;
-
- psy = power_supply_get_by_name("ds2760-battery.0");
-
- if (psy)
- power_supply_set_battery_charged(psy);
-
+ raumfeld_power_signal_charged();
return IRQ_HANDLED;
}
+++ /dev/null
-/*
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <mach/sharpsl_pm.h>
-
-/*
- * SharpSL Battery/PM Driver
- */
-#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
-
-/* MAX1111 Channel Definitions */
-#define MAX1111_BATT_VOLT 4u
-#define MAX1111_BATT_TEMP 2u
-#define MAX1111_ACIN_VOLT 6u
-
-extern struct battery_thresh sharpsl_battery_levels_acin[];
-extern struct battery_thresh sharpsl_battery_levels_noac[];
-int sharpsl_pm_pxa_read_max1111(int channel);
-
-
#include <mach/pm.h>
#include <mach/pxa2xx-regs.h>
#include <mach/regs-rtc.h>
-#include <mach/sharpsl.h>
#include <mach/sharpsl_pm.h>
-#include "sharpsl.h"
-
/*
* Constants
*/
if (machine_is_tosa())
return 0;
-#ifdef CONFIG_CORGI_SSP_DEPRECATED
- return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
- | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
-#else
extern int max1111_read_channel(int);
/* max1111 accepts channels from 0-3, however,
* it is encoded from 0-7 here in the code.
*/
return max1111_read_channel(channel >> 1);
-#endif
}
static int get_percentage(int voltage)
dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-#ifdef CONFIG_BACKLIGHT_CORGI
- /* If battery is low. limit backlight intensity to save power. */
- if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
- || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
- if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
- sharpsl_pm.machinfo->backlight_limit(1);
- sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
- }
- } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
- sharpsl_pm.machinfo->backlight_limit(0);
- sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
- }
-#endif
-
/* Suspend if critical battery level */
if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB
-#ifdef CONFIG_XSCALE_CACHE_ERRATA
- bic r9, r9, #0x0004 @ see cpu_xscale_proc_init
-#endif
-
mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode.
mcr p15, 0, r4, c15, c1, 0 @ CP access reg
mcr p15, 0, r5, c13, c0, 0 @ PID
.text
resume_after_mmu:
-#ifdef CONFIG_XSCALE_CACHE_ERRATA
- bl cpu_xscale_proc_init
-#endif
ldmfd sp!, {r2, r3}
#ifndef CONFIG_IWMMXT
mar acc0, r2, r3
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
+#include <linux/mtd/physmap.h>
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/regulator/machine.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/scoop.h>
-
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
-#include <plat/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxafb.h>
#include <mach/pxa2xx_spi.h>
#include <mach/spitz.h>
+#include <mach/sharpsl_pm.h>
+
+#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
-#include "sharpsl.h"
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
static unsigned long spitz_pin_config[] __initdata = {
/* Chip Selects */
GPIO78_nCS_2, /* SCOOP #2 */
GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */
};
-/*
- * Spitz SCOOP Device #1
- */
-static struct resource spitz_scoop_resources[] = {
+
+/******************************************************************************
+ * Scoop GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
+/* SCOOP Device #1 */
+static struct resource spitz_scoop_1_resources[] = {
[0] = {
.start = 0x10800000,
.end = 0x10800fff,
},
};
-static struct scoop_config spitz_scoop_setup = {
+static struct scoop_config spitz_scoop_1_setup = {
.io_dir = SPITZ_SCP_IO_DIR,
.io_out = SPITZ_SCP_IO_OUT,
.suspend_clr = SPITZ_SCP_SUS_CLR,
.gpio_base = SPITZ_SCP_GPIO_BASE,
};
-struct platform_device spitzscoop_device = {
+struct platform_device spitz_scoop_1_device = {
.name = "sharp-scoop",
.id = 0,
.dev = {
- .platform_data = &spitz_scoop_setup,
+ .platform_data = &spitz_scoop_1_setup,
},
- .num_resources = ARRAY_SIZE(spitz_scoop_resources),
- .resource = spitz_scoop_resources,
+ .num_resources = ARRAY_SIZE(spitz_scoop_1_resources),
+ .resource = spitz_scoop_1_resources,
};
-/*
- * Spitz SCOOP Device #2
- */
-static struct resource spitz_scoop2_resources[] = {
+/* SCOOP Device #2 */
+static struct resource spitz_scoop_2_resources[] = {
[0] = {
.start = 0x08800040,
.end = 0x08800fff,
},
};
-static struct scoop_config spitz_scoop2_setup = {
+static struct scoop_config spitz_scoop_2_setup = {
.io_dir = SPITZ_SCP2_IO_DIR,
.io_out = SPITZ_SCP2_IO_OUT,
.suspend_clr = SPITZ_SCP2_SUS_CLR,
.gpio_base = SPITZ_SCP2_GPIO_BASE,
};
-struct platform_device spitzscoop2_device = {
+struct platform_device spitz_scoop_2_device = {
.name = "sharp-scoop",
.id = 1,
.dev = {
- .platform_data = &spitz_scoop2_setup,
+ .platform_data = &spitz_scoop_2_setup,
},
- .num_resources = ARRAY_SIZE(spitz_scoop2_resources),
- .resource = spitz_scoop2_resources,
+ .num_resources = ARRAY_SIZE(spitz_scoop_2_resources),
+ .resource = spitz_scoop_2_resources,
};
-#define SPITZ_PWR_SD 0x01
-#define SPITZ_PWR_CF 0x02
+static void __init spitz_scoop_init(void)
+{
+ platform_device_register(&spitz_scoop_1_device);
+
+ /* Akita doesn't have the second SCOOP chip */
+ if (!machine_is_akita())
+ platform_device_register(&spitz_scoop_2_device);
+}
/* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
+static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
{
- unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
+ unsigned short cpr;
+ unsigned long flags;
- if (new_cpr & 0x0007) {
+ if (new_cpr & 0x7) {
gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
- if (!(cpr & 0x0002) && !(cpr & 0x0004))
- mdelay(5);
- if (device == SPITZ_PWR_CF)
- cpr |= 0x0002;
- if (device == SPITZ_PWR_SD)
- cpr |= 0x0004;
- write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
- } else {
- if (device == SPITZ_PWR_CF)
- cpr &= ~0x0002;
- if (device == SPITZ_PWR_SD)
- cpr &= ~0x0004;
- if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
- write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
- mdelay(1);
- gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
- } else {
- write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
- }
+ mdelay(5);
+ }
+
+ local_irq_save(flags);
+
+ cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR);
+
+ if (enable & new_cpr)
+ cpr |= new_cpr;
+ else
+ cpr &= ~enable;
+
+ write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr);
+
+ local_irq_restore(flags);
+
+ if (!(cpr & 0x7)) {
+ mdelay(1);
+ gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
}
}
-static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
+#else
+static inline void spitz_scoop_init(void) {}
+static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {}
+#endif
+
+/******************************************************************************
+ * PCMCIA
+ ******************************************************************************/
+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
{
/* Only need to override behaviour for slot 0 */
if (nr == 0)
- spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
+ spitz_card_pwr_ctrl(
+ cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr);
else
write_scoop_reg(scoop, SCOOP_CPR, cpr);
}
static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
-{
- .dev = &spitzscoop_device.dev,
- .irq = SPITZ_IRQ_GPIO_CF_IRQ,
- .cd_irq = SPITZ_IRQ_GPIO_CF_CD,
- .cd_irq_str = "PCMCIA0 CD",
-},{
- .dev = &spitzscoop2_device.dev,
- .irq = SPITZ_IRQ_GPIO_CF2_IRQ,
- .cd_irq = -1,
-},
+ {
+ .dev = &spitz_scoop_1_device.dev,
+ .irq = SPITZ_IRQ_GPIO_CF_IRQ,
+ .cd_irq = SPITZ_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+ }, {
+ .dev = &spitz_scoop_2_device.dev,
+ .irq = SPITZ_IRQ_GPIO_CF2_IRQ,
+ .cd_irq = -1,
+ },
};
static struct scoop_pcmcia_config spitz_pcmcia_config = {
- .devs = &spitz_pcmcia_scoop[0],
- .num_devs = 2,
- .power_ctrl = spitz_pcmcia_pwr,
+ .devs = &spitz_pcmcia_scoop[0],
+ .num_devs = 2,
+ .power_ctrl = spitz_pcmcia_pwr,
};
-EXPORT_SYMBOL(spitzscoop_device);
-EXPORT_SYMBOL(spitzscoop2_device);
+static void __init spitz_pcmcia_init(void)
+{
+ /* Akita has only one PCMCIA slot used */
+ if (machine_is_akita())
+ spitz_pcmcia_config.num_devs = 1;
+
+ platform_scoop_config = &spitz_pcmcia_config;
+}
+#else
+static inline void spitz_pcmcia_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
-/*
- * Spitz Keyboard Device
- */
#define SPITZ_KEY_CALENDAR KEY_F1
#define SPITZ_KEY_ADDRESS KEY_F2
#define SPITZ_KEY_FN KEY_F3
#define SPITZ_KEY_OK KEY_F11
#define SPITZ_KEY_MENU KEY_F12
-static const uint32_t spitzkbd_keymap[] = {
+static const uint32_t spitz_keymap[] = {
KEY(0, 0, KEY_LEFTCTRL),
KEY(0, 1, KEY_1),
KEY(0, 2, KEY_3),
KEY(6, 8, KEY_RIGHT),
};
-static const struct matrix_keymap_data spitzkbd_keymap_data = {
- .keymap = spitzkbd_keymap,
- .keymap_size = ARRAY_SIZE(spitzkbd_keymap),
+static const struct matrix_keymap_data spitz_keymap_data = {
+ .keymap = spitz_keymap,
+ .keymap_size = ARRAY_SIZE(spitz_keymap),
};
-static const uint32_t spitzkbd_row_gpios[] =
+static const uint32_t spitz_row_gpios[] =
{ 12, 17, 91, 34, 36, 38, 39 };
-static const uint32_t spitzkbd_col_gpios[] =
+static const uint32_t spitz_col_gpios[] =
{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
-static struct matrix_keypad_platform_data spitzkbd_pdata = {
- .keymap_data = &spitzkbd_keymap_data,
- .row_gpios = spitzkbd_row_gpios,
- .col_gpios = spitzkbd_col_gpios,
- .num_row_gpios = ARRAY_SIZE(spitzkbd_row_gpios),
- .num_col_gpios = ARRAY_SIZE(spitzkbd_col_gpios),
+static struct matrix_keypad_platform_data spitz_mkp_pdata = {
+ .keymap_data = &spitz_keymap_data,
+ .row_gpios = spitz_row_gpios,
+ .col_gpios = spitz_col_gpios,
+ .num_row_gpios = ARRAY_SIZE(spitz_row_gpios),
+ .num_col_gpios = ARRAY_SIZE(spitz_col_gpios),
.col_scan_delay_us = 10,
.debounce_ms = 10,
.wakeup = 1,
};
-static struct platform_device spitzkbd_device = {
+static struct platform_device spitz_mkp_device = {
.name = "matrix-keypad",
.id = -1,
.dev = {
- .platform_data = &spitzkbd_pdata,
+ .platform_data = &spitz_mkp_pdata,
},
};
+static void __init spitz_mkp_init(void)
+{
+ platform_device_register(&spitz_mkp_device);
+}
+#else
+static inline void spitz_mkp_init(void) {}
+#endif
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button spitz_gpio_keys[] = {
{
.type = EV_PWR,
},
};
+static void __init spitz_keys_init(void)
+{
+ platform_device_register(&spitz_gpio_keys_device);
+}
+#else
+static inline void spitz_keys_init(void) {}
+#endif
-/*
- * Spitz LEDs
- */
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led spitz_gpio_leds[] = {
{
.name = "spitz:amber:charge",
.num_leds = ARRAY_SIZE(spitz_gpio_leds),
};
-static struct platform_device spitzled_device = {
+static struct platform_device spitz_led_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
- .platform_data = &spitz_gpio_leds_info,
+ .platform_data = &spitz_gpio_leds_info,
},
};
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master spitz_spi_info = {
- .num_chipselect = 3,
-};
+static void __init spitz_leds_init(void)
+{
+ platform_device_register(&spitz_led_device);
+}
+#else
+static inline void spitz_leds_init(void) {}
+#endif
-static void spitz_wait_for_hsync(void)
+/******************************************************************************
+ * SSP Devices
+ ******************************************************************************/
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static void spitz_ads7846_wait_for_hsync(void)
{
while (gpio_get_value(SPITZ_GPIO_HSYNC))
cpu_relax();
.y_plate_ohms = 486,
.pressure_max = 1024,
.gpio_pendown = SPITZ_GPIO_TP_INT,
- .wait_for_sync = spitz_wait_for_hsync,
+ .wait_for_sync = spitz_ads7846_wait_for_hsync,
};
static struct pxa2xx_spi_chip spitz_ads7846_chip = {
static struct spi_board_info spitz_spi_devices[] = {
{
- .modalias = "ads7846",
- .max_speed_hz = 1200000,
- .bus_num = 2,
- .chip_select = 0,
- .platform_data = &spitz_ads7846_info,
- .controller_data= &spitz_ads7846_chip,
- .irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
+ .modalias = "ads7846",
+ .max_speed_hz = 1200000,
+ .bus_num = 2,
+ .chip_select = 0,
+ .platform_data = &spitz_ads7846_info,
+ .controller_data = &spitz_ads7846_chip,
+ .irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
}, {
- .modalias = "corgi-lcd",
- .max_speed_hz = 50000,
- .bus_num = 2,
- .chip_select = 1,
- .platform_data = &spitz_lcdcon_info,
- .controller_data= &spitz_lcdcon_chip,
+ .modalias = "corgi-lcd",
+ .max_speed_hz = 50000,
+ .bus_num = 2,
+ .chip_select = 1,
+ .platform_data = &spitz_lcdcon_info,
+ .controller_data = &spitz_lcdcon_chip,
}, {
- .modalias = "max1111",
- .max_speed_hz = 450000,
- .bus_num = 2,
- .chip_select = 2,
- .controller_data= &spitz_max1111_chip,
+ .modalias = "max1111",
+ .max_speed_hz = 450000,
+ .bus_num = 2,
+ .chip_select = 2,
+ .controller_data = &spitz_max1111_chip,
},
};
-static void __init spitz_init_spi(void)
+static struct pxa2xx_spi_master spitz_spi_info = {
+ .num_chipselect = 3,
+};
+
+static void __init spitz_spi_init(void)
{
+ struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
+
if (machine_is_akita()) {
- spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
- spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+ lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+ lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
}
pxa2xx_set_spi_info(2, &spitz_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
}
#else
-static inline void spitz_init_spi(void) {}
+static inline void spitz_spi_init(void) {}
#endif
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
+ * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
+ * give the card a chance to fully insert/eject.
*/
static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
- if (( 1 << vdd) & p_d->ocr_mask)
- spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
+ if ((1 << vdd) & p_d->ocr_mask)
+ spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
else
- spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
+ spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
}
static struct pxamci_platform_data spitz_mci_platform_data = {
.detect_delay_ms = 250,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .setpower = spitz_mci_setpower,
+ .setpower = spitz_mci_setpower,
.gpio_card_detect = SPITZ_GPIO_nSD_DETECT,
.gpio_card_ro = SPITZ_GPIO_nSD_WP,
.gpio_power = -1,
};
+static void __init spitz_mmc_init(void)
+{
+ pxa_set_mci_info(&spitz_mci_platform_data);
+}
+#else
+static inline void spitz_mmc_init(void) {}
+#endif
-/*
- * USB Host (OHCI)
- */
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int spitz_ohci_init(struct device *dev)
{
int err;
if (err)
return err;
- /* Only Port 2 is connected
- * Setup USB Port 2 Output Control Register
- */
+ /* Only Port 2 is connected, setup USB Port 2 Output Control Register */
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
.power_budget = 150,
};
+static void __init spitz_uhc_init(void)
+{
+ pxa_set_ohci_info(&spitz_ohci_platform_data);
+}
+#else
+static inline void spitz_uhc_init(void) {}
+#endif
-/*
- * Irda
- */
-
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
static struct pxaficp_platform_data spitz_ficp_platform_data = {
-/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
+static void __init spitz_irda_init(void)
+{
+ if (machine_is_akita())
+ spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
+ else
+ spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-/*
- * Spitz PXA Framebuffer
- */
+ pxa_set_ficp_info(&spitz_ficp_platform_data);
+}
+#else
+static inline void spitz_irda_init(void) {}
+#endif
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info spitz_pxafb_modes[] = {
-{
- .pixclock = 19231,
- .xres = 480,
- .yres = 640,
- .bpp = 16,
- .hsync_len = 40,
- .left_margin = 46,
- .right_margin = 125,
- .vsync_len = 3,
- .upper_margin = 1,
- .lower_margin = 0,
- .sync = 0,
-},{
- .pixclock = 134617,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .hsync_len = 20,
- .left_margin = 20,
- .right_margin = 46,
- .vsync_len = 2,
- .upper_margin = 1,
- .lower_margin = 0,
- .sync = 0,
-},
+ {
+ .pixclock = 19231,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 40,
+ .left_margin = 46,
+ .right_margin = 125,
+ .vsync_len = 3,
+ .upper_margin = 1,
+ .lower_margin = 0,
+ .sync = 0,
+ }, {
+ .pixclock = 134617,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 20,
+ .left_margin = 20,
+ .right_margin = 46,
+ .vsync_len = 2,
+ .upper_margin = 1,
+ .lower_margin = 0,
+ .sync = 0,
+ },
};
static struct pxafb_mach_info spitz_pxafb_info = {
- .modes = &spitz_pxafb_modes[0],
- .num_modes = 2,
+ .modes = spitz_pxafb_modes,
+ .num_modes = ARRAY_SIZE(spitz_pxafb_modes),
.fixed_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
};
-static struct mtd_partition sharpsl_nand_partitions[] = {
+static void __init spitz_lcd_init(void)
+{
+ set_pxa_fb_info(&spitz_pxafb_info);
+}
+#else
+static inline void spitz_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
+static struct mtd_partition spitz_nand_partitions[] = {
{
.name = "System Area",
.offset = 0,
.size = 7 * 1024 * 1024,
- },
- {
+ }, {
.name = "Root Filesystem",
.offset = 7 * 1024 * 1024,
- },
- {
+ }, {
.name = "Home Filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-static struct nand_bbt_descr sharpsl_bbt = {
- .options = 0,
- .offs = 4,
- .len = 2,
- .pattern = scan_ff_pattern
+static struct nand_bbt_descr spitz_nand_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static struct nand_ecclayout akita_oobinfo = {
+ .oobfree = { {0x08, 0x09} },
+ .eccbytes = 24,
+ .eccpos = {
+ 0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
+ 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+ 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
+ },
};
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
- .badblock_pattern = &sharpsl_bbt,
- .partitions = sharpsl_nand_partitions,
- .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
+static struct sharpsl_nand_platform_data spitz_nand_pdata = {
+ .badblock_pattern = &spitz_nand_bbt,
+ .partitions = spitz_nand_partitions,
+ .nr_partitions = ARRAY_SIZE(spitz_nand_partitions),
};
-static struct resource sharpsl_nand_resources[] = {
+static struct resource spitz_nand_resources[] = {
{
- .start = 0x0C000000,
- .end = 0x0C000FFF,
+ .start = PXA_CS3_PHYS,
+ .end = PXA_CS3_PHYS + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
-static struct platform_device sharpsl_nand_device = {
+static struct platform_device spitz_nand_device = {
.name = "sharpsl-nand",
.id = -1,
- .resource = sharpsl_nand_resources,
- .num_resources = ARRAY_SIZE(sharpsl_nand_resources),
- .dev.platform_data = &sharpsl_nand_platform_data,
+ .resource = spitz_nand_resources,
+ .num_resources = ARRAY_SIZE(spitz_nand_resources),
+ .dev = {
+ .platform_data = &spitz_nand_pdata,
+ }
};
+static void __init spitz_nand_init(void)
+{
+ if (machine_is_spitz()) {
+ spitz_nand_partitions[1].size = 5 * 1024 * 1024;
+ } else if (machine_is_akita()) {
+ spitz_nand_partitions[1].size = 58 * 1024 * 1024;
+ spitz_nand_bbt.len = 1;
+ spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+ } else if (machine_is_borzoi()) {
+ spitz_nand_partitions[1].size = 32 * 1024 * 1024;
+ spitz_nand_bbt.len = 1;
+ spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+ }
+
+ platform_device_register(&spitz_nand_device);
+}
+#else
+static inline void spitz_nand_init(void) {}
+#endif
-static struct mtd_partition sharpsl_rom_parts[] = {
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition spitz_rom_parts[] = {
{
.name ="Boot PROM Filesystem",
.offset = 0x00140000,
},
};
-static struct physmap_flash_data sharpsl_rom_data = {
+static struct physmap_flash_data spitz_rom_data = {
.width = 2,
- .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
- .parts = sharpsl_rom_parts,
+ .nr_parts = ARRAY_SIZE(spitz_rom_parts),
+ .parts = spitz_rom_parts,
};
-static struct resource sharpsl_rom_resources[] = {
+static struct resource spitz_rom_resources[] = {
{
- .start = 0x00000000,
- .end = 0x007fffff,
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_8M - 1,
.flags = IORESOURCE_MEM,
},
};
-static struct platform_device sharpsl_rom_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = sharpsl_rom_resources,
- .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
- .dev.platform_data = &sharpsl_rom_data,
+static struct platform_device spitz_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = spitz_rom_resources,
+ .num_resources = ARRAY_SIZE(spitz_rom_resources),
+ .dev = {
+ .platform_data = &spitz_rom_data,
+ },
};
-static struct platform_device *devices[] __initdata = {
- &spitzscoop_device,
- &spitzkbd_device,
- &spitz_gpio_keys_device,
- &spitzled_device,
- &sharpsl_nand_device,
- &sharpsl_rom_device,
+static void __init spitz_nor_init(void)
+{
+ platform_device_register(&spitz_rom_device);
+}
+#else
+static inline void spitz_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pca953x_platform_data akita_pca953x_pdata = {
+ .gpio_base = AKITA_IOEXP_GPIO_BASE,
};
+static struct i2c_board_info spitz_i2c_devs[] = {
+ {
+ .type = "wm8750",
+ .addr = 0x1b,
+ }, {
+ .type = "max7310",
+ .addr = 0x18,
+ .platform_data = &akita_pca953x_pdata,
+ },
+};
+
+static struct regulator_consumer_supply isl6271a_consumers[] = {
+ {
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data isl6271a_info[] = {
+ {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 850000,
+ .max_uV = 1600000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = isl6271a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(isl6271a_consumers),
+ }
+};
+
+static struct i2c_board_info spitz_pi2c_devs[] = {
+ {
+ .type = "isl6271a",
+ .addr = 0x0c,
+ .platform_data = &isl6271a_info,
+ },
+};
+
+static void __init spitz_i2c_init(void)
+{
+ int size = ARRAY_SIZE(spitz_i2c_devs);
+
+ /* Only Akita has the max7310 chip */
+ if (!machine_is_akita())
+ size--;
+
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(0, spitz_i2c_devs, size);
+ i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs));
+}
+#else
+static inline void spitz_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
static void spitz_poweroff(void)
{
arm_machine_restart('g', NULL);
static void spitz_restart(char mode, const char *cmd)
{
/* Bootloader magic for a reboot */
- if((MSC0 & 0xffff0000) == 0x7ff00000)
+ if ((MSC0 & 0xffff0000) == 0x7ff00000)
MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
spitz_poweroff();
}
-static void __init common_init(void)
+static void __init spitz_init(void)
{
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;
- if (machine_is_spitz()) {
- sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
- } else if (machine_is_akita()) {
- sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
- } else if (machine_is_borzoi()) {
- sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
- }
-
PMCR = 0x00;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- spitz_init_spi();
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_mci_info(&spitz_mci_platform_data);
- pxa_set_ohci_info(&spitz_ohci_platform_data);
- pxa_set_ficp_info(&spitz_ficp_platform_data);
- set_pxa_fb_info(&spitz_pxafb_info);
- pxa_set_i2c_info(NULL);
+ spitz_spi_init();
+ spitz_scoop_init();
+ spitz_mkp_init();
+ spitz_keys_init();
+ spitz_leds_init();
+ spitz_mmc_init();
+ spitz_pcmcia_init();
+ spitz_irda_init();
+ spitz_uhc_init();
+ spitz_lcd_init();
+ spitz_nor_init();
+ spitz_nand_init();
+ spitz_i2c_init();
}
-#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI)
-static struct nand_bbt_descr sharpsl_akita_bbt = {
- .options = 0,
- .offs = 4,
- .len = 1,
- .pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
- .eccbytes = 24,
- .eccpos = {
- 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
- 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
- 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
- .oobfree = {{0x08, 0x09}}
-};
-#endif
-
-#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void __init spitz_init(void)
-{
- spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
-#ifdef CONFIG_MACH_BORZOI
- if (machine_is_borzoi()) {
- sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
- sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
- }
-#endif
-
- platform_scoop_config = &spitz_pcmcia_config;
-
- common_init();
-
- platform_device_register(&spitzscoop2_device);
-}
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-/*
- * Akita IO Expander
- */
-static struct pca953x_platform_data akita_ioexp = {
- .gpio_base = AKITA_IOEXP_GPIO_BASE,
-};
-
-static struct i2c_board_info akita_i2c_board_info[] = {
- {
- .type = "max7310",
- .addr = 0x18,
- .platform_data = &akita_ioexp,
- }, {
- .type = "wm8750",
- .addr = 0x1b,
- },
-};
-
-static void __init akita_init(void)
-{
- spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
-
- sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
- sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
-
- /* We just pretend the second element of the array doesn't exist */
- spitz_pcmcia_config.num_devs = 1;
- platform_scoop_config = &spitz_pcmcia_config;
-
- i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
-
- common_init();
-}
-#endif
-
-static void __init fixup_spitz(struct machine_desc *desc,
+static void __init spitz_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
sharpsl_save_param();
MACHINE_START(SPITZ, "SHARP Spitz")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = fixup_spitz,
+ .fixup = spitz_fixup,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
MACHINE_START(BORZOI, "SHARP Borzoi")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = fixup_spitz,
+ .fixup = spitz_fixup,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
MACHINE_START(AKITA, "SHARP Akita")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = fixup_spitz,
+ .fixup = spitz_fixup,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
- .init_machine = akita_init,
+ .init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
#endif
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <mach/sharpsl.h>
#include <mach/spitz.h>
#include <mach/pxa27x.h>
+#include <mach/sharpsl_pm.h>
-#include "sharpsl.h"
#include "generic.h"
#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
case SHARPSL_STATUS_ACIN:
return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
case SHARPSL_STATUS_LOCK:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
case SHARPSL_STATUS_FATAL:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
case SHARPSL_ACIN_VOLT:
return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
case SHARPSL_BATT_TEMP:
.should_wakeup = spitz_should_wakeup,
#if defined(CONFIG_LCD_CORGI)
.backlight_limit = corgi_lcd_limit_intensity,
-#elif defined(CONFIG_BACKLIGHT_CORGI)
- .backlight_limit = corgibl_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
.charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
#include <linux/i2c/at24.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#include <asm/types.h>
#include <asm/setup.h>
#define SG2_GPIO_nSD_DETECT 90
#define SG2_SD_POWER_ENABLE 89
-static unsigned long stargate2_pin_config[] __initdata = {
-
- GPIO15_nCS_1, /* SRAM */
- /* SMC91x */
- GPIO80_nCS_4,
- GPIO40_GPIO, /*cable detect?*/
+static unsigned long sg2_im2_unified_pin_config[] __initdata = {
/* Device Identification for wakeup*/
GPIO102_GPIO,
-
- /* Button */
- GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
-
/* DA9030 */
GPIO1_GPIO,
- /* Compact Flash */
- GPIO79_PSKTSEL,
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO85_nPCE_1,
- GPIO54_nPCE_2,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
- GPIO120_GPIO, /* Buff ctrl */
- GPIO108_GPIO, /* Power ctrl */
- GPIO82_GPIO, /* Reset */
- GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
-
/* MMC */
GPIO32_MMC_CLK,
GPIO112_MMC_CMD,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
- GPIO90_GPIO, /* nSD detect */
- GPIO89_GPIO, /* SD_POWER_ENABLE */
- /* Bluetooth */
- GPIO81_GPIO, /* reset */
-
- /* cc2420 802.15.4 radio */
- GPIO22_GPIO, /* CC_RSTN (out)*/
- GPIO114_GPIO, /* CC_FIFO (in) */
- GPIO116_GPIO, /* CC_CCA (in) */
- GPIO0_GPIO, /* CC_FIFOP (in) */
- GPIO16_GPIO, /* CCSFD (in) */
- GPIO39_GPIO, /* CSn (out) */
+ /* 802.15.4 radio - driver out of mainline */
+ GPIO22_GPIO, /* CC_RSTN */
+ GPIO114_GPIO, /* CC_FIFO */
+ GPIO116_GPIO, /* CC_CCA */
+ GPIO0_GPIO, /* CC_FIFOP */
+ GPIO16_GPIO, /* CCSFD */
+ GPIO115_GPIO, /* Power enable */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* SSP 3 - 802.15.4 radio */
- GPIO39_GPIO, /* chip select */
+ GPIO39_GPIO, /* Chip Select */
GPIO34_SSP3_SCLK,
GPIO35_SSP3_TXD,
GPIO41_SSP3_RXD,
- /* SSP 2 */
+ /* SSP 2 to daughter boards */
GPIO11_SSP2_RXD,
GPIO38_SSP2_TXD,
GPIO36_SSP2_SCLK,
GPIO37_GPIO, /* chip select */
- /* SSP 1 */
- GPIO26_SSP1_RXD,
- GPIO25_SSP1_TXD,
+ /* SSP 1 - to daughter boards */
+ GPIO24_GPIO, /* Chip Select */
GPIO23_SSP1_SCLK,
- GPIO24_GPIO, /* chip select */
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
- /* BTUART */
+ /* BTUART Basic Connector*/
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
- /* STUART */
+ /* STUART - IM2 via debug board not sure on SG2*/
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
GPIO96_GPIO, /* accelerometer interrupt */
GPIO99_GPIO, /* ADC interrupt */
- /* Connector pins specified as gpios */
- GPIO94_GPIO, /* large basic connector pin 14 */
- GPIO10_GPIO, /* large basic connector pin 23 */
-
/* SHT15 */
GPIO100_GPIO,
GPIO98_GPIO,
-};
-/**
- * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
- **/
-static int stargate2_reset_bluetooth(void)
-{
- int err;
- err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
- if (err) {
- printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
- return err;
- }
- gpio_direction_output(SG2_BT_RESET, 1);
- mdelay(5);
- /* now reset it - 5 msec minimum */
- gpio_set_value(SG2_BT_RESET, 0);
- mdelay(10);
- gpio_set_value(SG2_BT_RESET, 1);
- gpio_free(SG2_BT_RESET);
- return 0;
-}
+ /* Basic sensor board */
+ GPIO96_GPIO, /* accelerometer interrupt */
+ GPIO99_GPIO, /* ADC interrupt */
-static struct led_info stargate2_leds[] = {
- {
- .name = "sg2:red",
- .flags = DA9030_LED_RATE_ON,
- }, {
- .name = "sg2:blue",
- .flags = DA9030_LED_RATE_ON,
- }, {
- .name = "sg2:green",
- .flags = DA9030_LED_RATE_ON,
- },
+ /* Connector pins specified as gpios */
+ GPIO94_GPIO, /* large basic connector pin 14 */
+ GPIO10_GPIO, /* large basic connector pin 23 */
};
static struct sht15_platform_data platform_data_sht15 = {
},
};
-static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+static struct mtd_partition stargate2flash_partitions[] = {
{
- .name = "da903x-led",
- .id = DA9030_ID_LED_2,
- .platform_data = &stargate2_leds[0],
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = 0,
}, {
- .name = "da903x-led",
- .id = DA9030_ID_LED_3,
- .platform_data = &stargate2_leds[2],
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0x00040000,
+ .mask_flags = 0
}, {
- .name = "da903x-led",
- .id = DA9030_ID_LED_4,
- .platform_data = &stargate2_leds[1],
+ .name = "Filesystem",
+ .size = 0x01DC0000,
+ .offset = 0x00240000,
+ .mask_flags = 0
+ },
+};
+
+static struct resource flash_resources = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+ .map_name = "cfi_probe",
+ .parts = stargate2flash_partitions,
+ .nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+ .name = "PXA27xOnChipROM",
+ .width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &stargate2_flash_data,
+ },
+ .resource = &flash_resources,
+ .num_resources = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+ .num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+ .tx_threshold = 8,
+ .rx_threshold = 8,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+ .tx_threshold = 8,
+ .rx_threshold = 8,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "lis3l02dq",
+ .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+ .bus_num = 1,
+ .chip_select = 0,
+ .controller_data = &staccel_chip_info,
+ .irq = IRQ_GPIO(96),
+ }, {
+ .modalias = "cc2420",
+ .max_speed_hz = 6500000,
+ .bus_num = 3,
+ .chip_select = 0,
+ .controller_data = &cc2420_info,
+ },
+};
+
+static void sg2_udc_command(int cmd)
+{
+ switch (cmd) {
+ case PXA2XX_UDC_CMD_CONNECT:
+ UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ break;
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+ break;
+ }
+}
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+ .fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+ .fast_mode = 1,
+};
+
+static void __init imote2_stargate2_init(void)
+{
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+ pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+ pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+
+ pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+ pxa_set_i2c_info(&i2c_pdata);
+}
+
+#ifdef CONFIG_MACH_INTELMOTE2
+/* As the the imote2 doesn't currently have a conventional SD slot
+ * there is no option to hotplug cards, making all this rather simple
+ */
+static int imote2_mci_get_ro(struct device *dev)
+{
+ return 0;
+}
+
+/* Rather simple case as hotplugging not possible */
+static struct pxamci_platform_data imote2_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
+ .get_ro = imote2_mci_get_ro,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+static struct gpio_led imote2_led_pins[] = {
+ {
+ .name = "imote2:red",
+ .gpio = 103,
+ .active_low = 1,
}, {
+ .name = "imote2:green",
+ .gpio = 104,
+ .active_low = 1,
+ }, {
+ .name = "imote2:blue",
+ .gpio = 105,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data imote2_led_data = {
+ .num_leds = ARRAY_SIZE(imote2_led_pins),
+ .leds = imote2_led_pins,
+};
+
+static struct platform_device imote2_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &imote2_led_data,
+ },
+};
+
+static struct da903x_subdev_info imote2_da9030_subdevs[] = {
+ {
.name = "da903x-regulator",
.id = DA9030_ID_LDO2,
.platform_data = &stargate2_ldo_init_data[vcc_bbio],
},
};
-static struct da903x_platform_data stargate2_da9030_pdata = {
- .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
- .subdevs = stargate2_da9030_subdevs,
+static struct da903x_platform_data imote2_da9030_pdata = {
+ .num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
+ .subdevs = imote2_da9030_subdevs,
};
-static struct resource smc91x_resources[] = {
- [0] = {
- .name = "smc91x-regs",
- .start = (PXA_CS4_PHYS + 0x300),
- .end = (PXA_CS4_PHYS + 0xfffff),
- .flags = IORESOURCE_MEM,
+static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
+ {
+ .type = "da9030",
+ .addr = 0x49,
+ .platform_data = &imote2_da9030_pdata,
+ .irq = gpio_to_irq(1),
},
- [1] = {
- .start = IRQ_GPIO(40),
- .end = IRQ_GPIO(40),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-static struct smc91x_platdata stargate2_smc91x_info = {
- .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
- | SMC91X_NOWAIT | SMC91X_USE_DMA,
};
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_resources),
+static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
+ { /* UCAM sensor board */
+ .type = "max1239",
+ .addr = 0x35,
+ }, { /* ITS400 Sensor board only */
+ .type = "max1363",
+ .addr = 0x34,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = IRQ_GPIO(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tsl2561",
+ .addr = 0x49,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = IRQ_GPIO(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tmp175",
+ .addr = 0x4A,
+ .irq = IRQ_GPIO(96),
+ }, { /* IMB400 Multimedia board */
+ .type = "wm8940",
+ .addr = 0x1A,
+ },
+};
+
+static unsigned long imote2_pin_config[] __initdata = {
+
+ /* Button */
+ GPIO91_GPIO,
+
+ /* LEDS */
+ GPIO103_GPIO, /* red led */
+ GPIO104_GPIO, /* green led */
+ GPIO105_GPIO, /* blue led */
+};
+
+static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
+ .udc_command = sg2_udc_command,
+};
+
+static struct platform_device *imote2_devices[] = {
+ &stargate2_flash_device,
+ &imote2_leds,
+ &sht15,
+};
+
+static void __init imote2_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+ imote2_stargate2_init();
+
+ platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
+
+ i2c_register_board_info(0, imote2_i2c_board_info,
+ ARRAY_SIZE(imote2_i2c_board_info));
+ i2c_register_board_info(1, imote2_pwr_i2c_board_info,
+ ARRAY_SIZE(imote2_pwr_i2c_board_info));
+
+ pxa_set_mci_info(&imote2_mci_platform_data);
+ pxa_set_udc_info(&imote2_udc_info);
+}
+#endif
+
+#ifdef CONFIG_MACH_STARGATE2
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+ GPIO15_nCS_1, /* SRAM */
+ /* SMC91x */
+ GPIO80_nCS_4,
+ GPIO40_GPIO, /*cable detect?*/
+
+ /* Button */
+ GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+ /* Compact Flash */
+ GPIO79_PSKTSEL,
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO120_GPIO, /* Buff ctrl */
+ GPIO108_GPIO, /* Power ctrl */
+ GPIO82_GPIO, /* Reset */
+ GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+ /* MMC not shared with imote2 */
+ GPIO90_GPIO, /* nSD detect */
+ GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+ /* Bluetooth */
+ GPIO81_GPIO, /* reset */
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = (PXA_CS4_PHYS + 0x300),
+ .end = (PXA_CS4_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_GPIO(40),
+ .end = IRQ_GPIO(40),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata stargate2_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
+ | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev = {
.platform_data = &stargate2_smc91x_info,
};
-
/*
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert / eject.
.exit = stargate2_mci_exit,
};
-static struct mtd_partition stargate2flash_partitions[] = {
- {
- .name = "Bootloader",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = 0,
- }, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0x00040000,
- .mask_flags = 0
- }, {
- .name = "Filesystem",
- .size = 0x01DC0000,
- .offset = 0x00240000,
- .mask_flags = 0
- },
-};
-
-static struct resource flash_resources = {
- .start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data stargate2_flash_data = {
- .map_name = "cfi_probe",
- .parts = stargate2flash_partitions,
- .nr_parts = ARRAY_SIZE(stargate2flash_partitions),
- .name = "PXA27xOnChipROM",
- .width = 2,
-};
-
-static struct platform_device stargate2_flash_device = {
- .name = "pxa2xx-flash",
- .id = 0,
- .dev = {
- .platform_data = &stargate2_flash_data,
- },
- .resource = &flash_resources,
- .num_resources = 1,
-};
/*
* SRAM - The Stargate 2 has 32MB of SRAM.
.page_size = 4,
};
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+ int err;
+ err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+ if (err) {
+ printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
+ return err;
+ }
+ gpio_direction_output(SG2_BT_RESET, 1);
+ mdelay(5);
+ /* now reset it - 5 msec minimum */
+ gpio_set_value(SG2_BT_RESET, 0);
+ mdelay(10);
+ gpio_set_value(SG2_BT_RESET, 1);
+ gpio_free(SG2_BT_RESET);
+ return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+ {
+ .name = "sg2:red",
+ .flags = DA9030_LED_RATE_ON,
+ }, {
+ .name = "sg2:blue",
+ .flags = DA9030_LED_RATE_ON,
+ }, {
+ .name = "sg2:green",
+ .flags = DA9030_LED_RATE_ON,
+ },
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+ {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_2,
+ .platform_data = &stargate2_leds[0],
+ }, {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_3,
+ .platform_data = &stargate2_leds[2],
+ }, {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_4,
+ .platform_data = &stargate2_leds[1],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO2,
+ .platform_data = &stargate2_ldo_init_data[vcc_bbio],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO3,
+ .platform_data = &stargate2_ldo_init_data[vcc_bb],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO4,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO5,
+ .platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO6,
+ .platform_data = &stargate2_ldo_init_data[vcc_vref],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO7,
+ .platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO8,
+ .platform_data = &stargate2_ldo_init_data[vcc_mica],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO9,
+ .platform_data = &stargate2_ldo_init_data[vcc_bt],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO10,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO11,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO12,
+ .platform_data = &stargate2_ldo_init_data[vcc_lcd],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO15,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO17,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+ }, {
+ .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+ .id = DA9030_ID_LDO18,
+ .platform_data = &stargate2_ldo_init_data[vcc_io],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO19,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+ },
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+ .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+ .subdevs = stargate2_da9030_subdevs,
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+ {
+ .type = "da9030",
+ .addr = 0x49,
+ .platform_data = &stargate2_da9030_pdata,
+ .irq = gpio_to_irq(1),
+ },
+};
static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
/* Techically this a pca9500 - but it's compatible with the 8574
},
};
-static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
- {
- .type = "da9030",
- .addr = 0x49,
- .platform_data = &stargate2_da9030_pdata,
- .irq = gpio_to_irq(1),
- },
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
- .num_chipselect = 1,
-};
-
-/* An upcoming kernel change will scrap SFRM usage so these
- * drivers have been moved to use gpio's via cs_control */
-static struct pxa2xx_spi_chip staccel_chip_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
- .gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
- .gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
- {
- .modalias = "lis3l02dq",
- .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
- .bus_num = 1,
- .chip_select = 0,
- .controller_data = &staccel_chip_info,
- .irq = IRQ_GPIO(96),
- }, {
- .modalias = "cc2420",
- .max_speed_hz = 6500000,
- .bus_num = 3,
- .chip_select = 0,
- .controller_data = &cc2420_info,
- },
-};
-
-static void sg2_udc_command(int cmd)
-{
- switch (cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
- break;
- }
-}
-
/* Board doesn't support cable detection - so always lie and say
* something is there.
*/
&sht15,
};
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
- .fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
- .fast_mode = 1,
-};
-
static void __init stargate2_init(void)
{
/* This is probably a board specific hack as this must be set
pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
+ imote2_stargate2_init();
platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
- pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
- pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
- pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
- i2c_register_board_info(1,
- ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
- pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
- pxa_set_i2c_info(&i2c_pdata);
+ i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
+ ARRAY_SIZE(stargate2_pwr_i2c_board_info));
pxa_set_mci_info(&stargate2_mci_platform_data);
stargate2_reset_bluetooth();
}
+#endif
+
+#ifdef CONFIG_MACH_INTELMOTE2
+MACHINE_START(INTELMOTE2, "IMOTE 2")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = imote2_init,
+ .boot_params = 0xA0000100,
+MACHINE_END
+#endif
+#ifdef CONFIG_MACH_STARGATE2
MACHINE_START(STARGATE2, "Stargate 2")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.init_machine = stargate2_init,
.boot_params = 0xA0000100,
MACHINE_END
+#endif
i2c_register_board_info(0, trizeps4_i2c_devices,
ARRAY_SIZE(trizeps4_i2c_devices));
-#ifdef CONFIG_IDE_PXA_CF
- /* if boot direct from compact flash dont disable power */
- trizeps_conxs_bcr = 0x0009;
-#else
/* this is the reset value */
trizeps_conxs_bcr = 0x00A0;
-#endif
+
BCR_writew(trizeps_conxs_bcr);
board_backlight_power(1);
}
#include <linux/dm9000.h>
#include <linux/ucb1400.h>
#include <linux/ata_platform.h>
+#include <linux/regulator/max1586.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/ohci.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
+#include <mach/pata_pxa.h>
#include <plat/i2c.h>
static void __init vpac270_rtc_init(void)
{
- pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
}
#else
.vsync_len = 2,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-},
+}, { /* CRT 640x480 */
+ .pixclock = 35000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .depth = 16,
+
+ .left_margin = 96,
+ .right_margin = 48,
+ .upper_margin = 33,
+ .lower_margin = 10,
+
+ .hsync_len = 48,
+ .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, { /* CRT 800x600 H=30kHz V=48HZ */
+ .pixclock = 25000,
+ .xres = 800,
+ .yres = 600,
+ .bpp = 16,
+ .depth = 16,
+
+ .left_margin = 50,
+ .right_margin = 1,
+ .upper_margin = 21,
+ .lower_margin = 12,
+
+ .hsync_len = 8,
+ .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, { /* CRT 1024x768 H=40kHz V=50Hz */
+ .pixclock = 15000,
+ .xres = 1024,
+ .yres = 768,
+ .bpp = 16,
+ .depth = 16,
+
+ .left_margin = 220,
+ .right_margin = 8,
+ .upper_margin = 33,
+ .lower_margin = 2,
+
+ .hsync_len = 48,
+ .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}
};
static struct pxafb_mach_info vpac270_lcd_screen = {
/******************************************************************************
* PATA IDE
******************************************************************************/
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-static struct pata_platform_info vpac270_pata_pdata = {
- .ioport_shift = 1,
+#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
+static struct pata_pxa_pdata vpac270_pata_pdata = {
+ .reg_shift = 1,
+ .dma_dreq = 1,
.irq_flags = IRQF_TRIGGER_RISING,
};
.end = PXA_CS3_PHYS + 0x15f,
.flags = IORESOURCE_MEM
},
- [2] = { /* IDE IRQ pin */
+ [2] = { /* DMA Base address */
+ .start = PXA_CS3_PHYS + 0x20,
+ .end = PXA_CS3_PHYS + 0x2f,
+ .flags = IORESOURCE_DMA
+ },
+ [3] = { /* IDE IRQ pin */
.start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
.end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
.flags = IORESOURCE_IRQ
};
static struct platform_device vpac270_ide_device = {
- .name = "pata_platform",
+ .name = "pata_pxa",
.num_resources = ARRAY_SIZE(vpac270_ide_resources),
.resource = vpac270_ide_resources,
.dev = {
.platform_data = &vpac270_pata_pdata,
+ .coherent_dma_mask = 0xffffffff,
}
};
static inline void vpac270_ide_init(void) {}
#endif
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
+ {
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data vpac270_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = vpac270_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(vpac270_max1587a_consumers),
+};
+
+static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &vpac270_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data vpac270_max1587a_info = {
+ .subdevs = vpac270_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &vpac270_max1587a_info,
+ },
+};
+
+static void __init vpac270_pmic_init(void)
+{
+ i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
+}
+#else
+static inline void vpac270_pmic_init(void) {}
+#endif
+
+
/******************************************************************************
* Machine init
******************************************************************************/
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ vpac270_pmic_init();
vpac270_lcd_init();
vpac270_mmc_init();
vpac270_nor_init();
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/pwm_backlight.h>
+#include <linux/z2_battery.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/spi/libertas_spi.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
+#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
}, {
.name = "U-Boot Environment",
.offset = 0x40000,
- .size = 0x60000,
+ .size = 0x20000,
}, {
.name = "Flash",
.offset = 0x60000,
static inline void z2_keys_init(void) {}
#endif
+/******************************************************************************
+ * Battery
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct z2_battery_info batt_chip_info = {
+ .batt_I2C_bus = 0,
+ .batt_I2C_addr = 0x55,
+ .batt_I2C_reg = 2,
+ .charge_gpio = GPIO0_ZIPITZ2_AC_DETECT,
+ .min_voltage = 2400000,
+ .max_voltage = 3700000,
+ .batt_div = 69,
+ .batt_mult = 1000000,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
+ .batt_name = "Z2",
+};
+
+static struct i2c_board_info __initdata z2_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("aer915", 0x55),
+ .platform_data = &batt_chip_info,
+ }, {
+ I2C_BOARD_INFO("wm8750", 0x1b),
+ },
+
+};
+
+static void __init z2_i2c_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
+}
+#else
+static inline void z2_i2c_init(void) {}
+#endif
+
/******************************************************************************
* SSP Devices - WiFi and LCD control
******************************************************************************/
static inline void z2_spi_init(void) {}
#endif
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_TPS65023) || \
+ defined(CONFIG_REGULATOR_TPS65023_MODULE)
+static struct regulator_consumer_supply z2_tps65021_consumers[] = {
+ {
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data z2_tps65021_info[] = {
+ {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 800000,
+ .max_uV = 1600000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = z2_tps65021_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(z2_tps65021_consumers),
+ }, {
+ .constraints = {
+ .name = "DCDC2",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ },
+ }, {
+ .constraints = {
+ .name = "DCDC3",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .always_on = 1,
+ },
+ }, {
+ .constraints = {
+ .name = "LDO1",
+ .min_uV = 1000000,
+ .max_uV = 3150000,
+ .always_on = 1,
+ },
+ }, {
+ .constraints = {
+ .name = "LDO2",
+ .min_uV = 1050000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ },
+ }
+};
+
+static struct i2c_board_info __initdata z2_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("tps65021", 0x48),
+ .platform_data = &z2_tps65021_info,
+ },
+};
+
+static void __init z2_pmic_init(void)
+{
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info));
+}
+#else
+static inline void z2_pmic_init(void) {}
+#endif
+
/******************************************************************************
* Machine init
******************************************************************************/
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
z2_lcd_init();
z2_mmc_init();
z2_mkp_init();
-
- pxa_set_i2c_info(NULL);
-
+ z2_i2c_init();
z2_spi_init();
z2_nor_init();
z2_pwm_init();
z2_leds_init();
z2_keys_init();
+ z2_pmic_init();
}
MACHINE_START(ZIPIT2, "Zipit Z2")
#include <plat/cpu.h>
#include <plat/iic-core.h>
+#include <plat/fb-core.h>
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
- s3c_device_fb.name = "s3c2443-fb";
+ s3c_fb_setname("s3c2443-fb");
return sysdev_register(&s3c2416_sysdev);
}
static struct pcf50633 *gta02_pcf;
/*
- * This gets called every 1ms when we paniced.
+ * This gets called frequently when we paniced.
*/
-static long gta02_panic_blink(long count)
+static long gta02_panic_blink(int state)
{
long delay = 0;
- static long last_blink;
- static char led;
+ char led;
- /* Fast blink: 200ms period. */
- if (count - last_blink < 100)
- return 0;
-
- led ^= 1;
+ led = (state) ? 1 : 0;
gpio_direction_output(GTA02_GPIO_AUX_LED, led);
- last_blink = count;
-
return delay;
}
static void __init gta02_machine_init(void)
{
- /* Set the panic callback to make AUX LED blink at ~5Hz. */
+ /* Set the panic callback to turn AUX LED on or off. */
panic_blink = gta02_panic_blink;
s3c_pm_init();
#include <plat/s3c2443.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/fb-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
s3c24xx_reset_hook = s3c2443_hard_reset;
s3c_device_nand.name = "s3c2412-nand";
+ s3c_fb_setname("s3c2443-fb");
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
help
Common setup code for i2c bus 1.
+config S3C64XX_SETUP_IDE
+ bool
+ help
+ Common setup code for S3C64XX IDE.
+
config S3C64XX_SETUP_FB_24BPP
bool
help
Common setup code for S3C64XX with an 24bpp RGB display helper.
+config S3C64XX_SETUP_KEYPAD
+ bool
+ help
+ Common setup code for S3C64XX KEYPAD GPIO configurations
+
config S3C64XX_SETUP_SDHCI_GPIO
bool
help
help
Machine support for the A&W6410
+config MACH_REAL6410
+ bool "REAL6410"
+ select CPU_S3C6410
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C64XX_SETUP_SDHCI
+ help
+ Machine support for the CoreWind REAL6410
+
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
+ select SAMSUNG_DEV_IDE
select S3C_DEV_FB
+ select S3C_DEV_RTC
select SAMSUNG_DEV_TS
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
+ select SAMSUNG_DEV_KEYPAD
select HAVE_S3C2410_WATCHDOG
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_KEYPAD
help
Machine support for the Samsung SMDK6410
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
obj-$(CONFIG_MACH_HMT) += mach-hmt.o
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
.name = "nand",
.id = -1,
.parent = &clk_h,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_RTC,
}, {
.name = "adc",
.id = -1,
.ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
}, {
#endif
+ .name = "keypad",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_KEYPAD,
+ }, {
.name = "spi",
.id = 0,
.parent = &clk_p,
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_UART3,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_RTC,
}, {
.name = "watchdog",
.id = -1,
.id = -1,
.parent = &clk_p,
.ctrlbit = S3C_CLKCON_PCLK_AC97,
+ }, {
+ .name = "cfcon",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_IHOST,
}
};
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/dma.h>
-#include <mach/gpio.h>
#include <plat/devs.h>
#include <plat/audio.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
-#include <mach/gpio.h>
#include <mach/gpio-bank-c.h>
#include <mach/spi-clocks.h>
chptr->number = chno;
chptr->dmac = dmac;
chptr->regs = regptr;
- regptr += PL008_Cx_STRIDE;
+ regptr += PL080_Cx_STRIDE;
}
/* for the moment, permanently enable the controller */
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <mach/map.h>
-#include <mach/gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#define S3C64XX_PA_USB_HSOTG (0x7C000000)
#define S3C64XX_PA_WATCHDOG (0x7E004000)
#define S3C64XX_PA_RTC (0x7E005000)
+#define S3C64XX_PA_KEYPAD (0x7E00A000)
#define S3C64XX_PA_ADC (0x7E00B000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_AC97 (0x7F001000)
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
+
+#define S3C64XX_PA_CFCON (0x70300000)
+
#define S3C64XX_PA_VIC0 (0x71200000)
#define S3C64XX_PA_VIC1 (0x71300000)
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
+#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S3C64XX_PA_KEYPAD
#endif /* __ASM_ARCH_6400_MAP_H */
#define PHYS_OFFSET UL(0x50000000)
+#define CONSISTENT_DMA_SIZE SZ_8M
+
#endif
#define S3C_SCLK_GATE S3C_CLKREG(0x38)
#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
+#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
/* CLKDIV0 */
#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2)
#define S3C6400_CLKSRC_MFC (1 << 4)
+/* MEM_SYS_CFG */
+#define MEM_SYS_CFG_INDEP_CF 0x4000
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
+
#endif /* _PLAT_REGS_CLOCK_H */
#include <plat/regs-fb-v4.h>
-/* Palette registers */
-#define WIN2_PAL(_entry) (0x300 + ((_entry) * 2))
-#define WIN3_PAL(_entry) (0x320 + ((_entry) * 2))
-#define WIN4_PAL(_entry) (0x340 + ((_entry) * 2))
-#define WIN0_PAL(_entry) (0x400 + ((_entry) * 4))
-#define WIN1_PAL(_entry) (0x800 + ((_entry) * 4))
-
-static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
-{
- switch (window) {
- case 0: return WIN0_PAL(reg);
- case 1: return WIN1_PAL(reg);
- case 2: return WIN2_PAL(reg);
- case 3: return WIN3_PAL(reg);
- case 4: return WIN4_PAL(reg);
- }
-
- BUG();
-}
-
#endif /* __ASM_ARCH_MACH_REGS_FB_H */
static struct s3c_fb_pd_win anw6410_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
- .pixclock = 41094,
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
static struct s3c_fb_pd_win hmt_fb_win0 = {
.win_mode = {
- .pixclock = 41094,
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/mach-real6410.c
+ *
+ * Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/dm9000.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/map.h>
+#include <mach/s3c6410.h>
+#include <mach/regs-srom.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource real6410_dm9k_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_XM0CSN1,
+ .end = S3C64XX_PA_XM0CSN1 + 1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = S3C64XX_PA_XM0CSN1 + 4,
+ .end = S3C64XX_PA_XM0CSN1 + 5,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = S3C_EINT(7),
+ .end = S3C_EINT(7),
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct dm9000_plat_data real6410_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device real6410_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(real6410_dm9k_resource),
+ .resource = real6410_dm9k_resource,
+ .dev = {
+ .platform_data = &real6410_dm9k_pdata,
+ },
+};
+
+static struct platform_device *real6410_devices[] __initdata = {
+ &real6410_device_eth,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+};
+
+static void __init real6410_map_io(void)
+{
+ s3c64xx_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+}
+
+static void __init real6410_machine_init(void)
+{
+ u32 cs1;
+
+ /* configure nCS1 width to 16 bits */
+
+ cs1 = __raw_readl(S3C64XX_SROM_BW) &
+ ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S3C64XX_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S3C64XX_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+
+ __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+ (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+ (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+ (13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+ (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+ platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
+}
+
+MACHINE_START(REAL6410, "REAL6410")
+ /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+
+ .init_irq = s3c6410_init_irq,
+ .map_io = real6410_map_io,
+ .init_machine = real6410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/serial_core.h>
+#include <linux/spi/spi_gpio.h>
#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
.max_width = 4,
- /*.broken_card_detection = true,*/
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
};
static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
},
};
+static int __init smartq_lcd_setup_gpio(void)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPM(3), "LCD power");
+ if (ret < 0)
+ return ret;
+
+ /* turn power off */
+ gpio_direction_output(S3C64XX_GPM(3), 0);
+
+ return 0;
+}
+
+/* GPM0 -> CS */
+static struct spi_gpio_platform_data smartq_lcd_control = {
+ .sck = S3C64XX_GPM(1),
+ .mosi = S3C64XX_GPM(2),
+ .miso = S3C64XX_GPM(2),
+};
+
+static struct platform_device smartq_lcd_control_device = {
+ .name = "spi-gpio",
+ .id = 1,
+ .dev.platform_data = &smartq_lcd_control,
+};
+
static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
{
gpio_direction_output(S3C64XX_GPM(3), power);
.dev.platform_data = &smartq_lcd_power_data,
};
+static struct i2c_board_info smartq_i2c_devs[] __initdata = {
+ { I2C_BOARD_INFO("wm8987", 0x1a), },
+};
static struct platform_device *smartq_devices[] __initdata = {
&s3c_device_hsmmc1, /* Init iNAND first, ... */
&s3c_device_timer[1],
&s3c_device_ts,
&s3c_device_usb_hsotg,
+ &s3c64xx_device_iis0,
&smartq_backlight_device,
+ &smartq_lcd_control_device,
&smartq_lcd_power_device,
&smartq_usb_otg_vbus_dev,
};
/* leave power on */
gpio_direction_output(S3C64XX_GPK(15), 0);
-
pm_power_off = smartq_power_off;
return ret;
s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
+ i2c_register_board_info(0, smartq_i2c_devs,
+ ARRAY_SIZE(smartq_i2c_devs));
+
+ WARN_ON(smartq_lcd_setup_gpio());
WARN_ON(smartq_power_off_init());
WARN_ON(smartq_usb_host_init());
WARN_ON(smartq_usb_otg_init());
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
-#include <linux/i2c-gpio.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/leds.h>
#include "mach-smartq.h"
-static void __init smartq5_lcd_setup_gpio(void)
-{
- gpio_request(S3C64XX_GPM(0), "LCD SCEN pin");
- gpio_request(S3C64XX_GPM(1), "LCD SCL pin");
- gpio_request(S3C64XX_GPM(2), "LCD SDA pin");
- gpio_request(S3C64XX_GPM(3), "LCD power");
-
- /* turn power off */
- gpio_direction_output(S3C64XX_GPM(0), 1);
- gpio_direction_input(S3C64XX_GPM(1));
- gpio_direction_input(S3C64XX_GPM(2));
- gpio_direction_output(S3C64XX_GPM(3), 0);
-}
-
-static struct i2c_gpio_platform_data smartq5_lcd_control = {
- .sda_pin = S3C64XX_GPM(2),
- .scl_pin = S3C64XX_GPM(1),
-};
-
-static struct platform_device smartq5_lcd_control_device = {
- .name = "i2c-gpio",
- .id = 1,
- .dev.platform_data = &smartq5_lcd_control,
-};
-
static struct gpio_led smartq5_leds[] __initdata = {
{
.name = "smartq5:green",
static struct s3c_fb_pd_win smartq5_fb_win0 = {
.win_mode = {
- .pixclock = 1000000000000ULL /
- ((40+1+216+800)*(10+1+35+480)*80),
- .left_margin = 40,
- .right_margin = 216,
- .upper_margin = 10,
- .lower_margin = 35,
+ .left_margin = 216,
+ .right_margin = 40,
+ .upper_margin = 35,
+ .lower_margin = 10,
.hsync_len = 1,
.vsync_len = 1,
.xres = 800,
.yres = 480,
+ .refresh = 80,
},
.max_bpp = 32,
.default_bpp = 16,
static struct platform_device *smartq5_devices[] __initdata = {
&smartq5_leds_device,
&smartq5_buttons_device,
- &smartq5_lcd_control_device,
};
static void __init smartq5_machine_init(void)
s3c_fb_set_platdata(&smartq5_lcd_pdata);
smartq_machine_init();
- smartq5_lcd_setup_gpio();
platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
}
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
-#include <linux/i2c-gpio.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/leds.h>
#include "mach-smartq.h"
-static void __init smartq7_lcd_setup_gpio(void)
-{
- gpio_request(S3C64XX_GPM(0), "LCD CSB pin");
- gpio_request(S3C64XX_GPM(3), "LCD power");
- gpio_request(S3C64XX_GPM(4), "LCD power status");
-
- /* turn power off */
- gpio_direction_output(S3C64XX_GPM(0), 1);
- gpio_direction_output(S3C64XX_GPM(3), 0);
- gpio_direction_input(S3C64XX_GPM(4));
-}
-
-static struct i2c_gpio_platform_data smartq7_lcd_control = {
- .sda_pin = S3C64XX_GPM(2),
- .scl_pin = S3C64XX_GPM(1),
- .sda_is_open_drain = 1,
- .scl_is_open_drain = 1,
-};
-
-static struct platform_device smartq7_lcd_control_device = {
- .name = "i2c-gpio",
- .id = 1,
- .dev.platform_data = &smartq7_lcd_control,
-};
-
static struct gpio_led smartq7_leds[] __initdata = {
{
.name = "smartq7:red",
static struct s3c_fb_pd_win smartq7_fb_win0 = {
.win_mode = {
- .pixclock = 1000000000000ULL /
- ((3+10+5+800)*(1+3+20+480)*80),
.left_margin = 3,
.right_margin = 5,
.upper_margin = 1,
.vsync_len = 3,
.xres = 800,
.yres = 480,
+ .refresh = 80,
},
.max_bpp = 32,
.default_bpp = 16,
static struct platform_device *smartq7_devices[] __initdata = {
&smartq7_leds_device,
&smartq7_buttons_device,
- &smartq7_lcd_control_device,
};
static void __init smartq7_machine_init(void)
s3c_fb_set_platdata(&smartq7_lcd_pdata);
smartq_machine_init();
- smartq7_lcd_setup_gpio();
platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
}
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/input.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <mach/regs-gpio.h>
#include <mach/regs-sys.h>
#include <mach/regs-srom.h>
+#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/cpu.h>
#include <plat/adc.h>
#include <plat/ts.h>
+#include <plat/keypad.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
static struct s3c_fb_pd_win smdk6410_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
- .pixclock = 41094,
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
},
.max_bpp = 32,
.default_bpp = 16,
+ .virtual_y = 480 * 2,
+ .virtual_x = 800,
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
};
#endif
+static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
+ .setup_gpio = s3c64xx_ide_setup_gpio,
+};
+
+static uint32_t smdk6410_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+ KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+ KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+ KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
+ .keymap = smdk6410_keymap,
+ .keymap_size = ARRAY_SIZE(smdk6410_keymap),
+};
+
+static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
+ .keymap_data = &smdk6410_keymap_data,
+ .rows = 2,
+ .cols = 8,
+};
+
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_ohci,
&s3c_device_usb_hsotg,
&s3c64xx_device_iisv4,
+ &samsung_device_keypad,
#ifdef CONFIG_REGULATOR
&smdk6410_b_pwr_5v,
&smdk6410_smsc911x,
&s3c_device_adc,
+ &s3c_device_cfcon,
+ &s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
};
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+ samsung_keypad_set_platdata(&smdk6410_keypad_data);
+
s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* configure nCS1 width to 16 bits */
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+ s3c_ide_set_platdata(&smdk6410_ide_pdata);
+
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
+#include <plat/ata-core.h>
+#include <plat/adc-core.h>
#include <plat/iic-core.h>
-#include <plat/adc.h>
#include <plat/onenand-core.h>
#include <mach/s3c6400.h>
#include <mach/s3c6410.h>
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
- s3c_device_adc.name = "s3c64xx-adc";
+ s3c_adc_setname("s3c64xx-adc");
s3c_device_nand.name = "s3c6400-nand";
s3c_onenand_setname("s3c6410-onenand");
s3c64xx_onenand1_setname("s3c6410-onenand");
+ s3c_cfcon_setname("s3c64xx-pata");
}
void __init s3c6410_init_clocks(int xtal)
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fb.h>
+#include <linux/gpio.h>
#include <mach/regs-fb.h>
-#include <mach/gpio.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
-#include <mach/gpio.h>
#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
-#include <mach/gpio.h>
#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S3C64XX setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_ide_setup_gpio(void)
+{
+ u32 reg;
+ u32 gpio = 0;
+
+ reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
+
+ /* Independent CF interface, CF chip select configuration */
+ writel(reg | MEM_SYS_CFG_INDEP_CF |
+ MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
+
+ s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
+
+ /* Set XhiDATA[15:0] pins as CF Data[15:0] */
+ for (gpio = S3C64XX_GPK(0); gpio <= S3C64XX_GPK(15); gpio++)
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(5));
+
+ /* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
+ for (gpio = S3C64XX_GPL(0); gpio <= S3C64XX_GPL(2); gpio++)
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+
+ /* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
+ s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
+ for (gpio = S3C64XX_GPM(0); gpio <= S3C64XX_GPM(4); gpio++)
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+}
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/setup-keypad.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * GPIO configuration for S3C64XX KeyPad device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ /* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
+ end = S3C64XX_GPK(8 + rows);
+ for (gpio = S3C64XX_GPK(8); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ /* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
+ end = S3C64XX_GPL(0 + cols);
+ for (gpio = S3C64XX_GPL(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+}
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/gpio.h>
-#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
+#include <plat/sdhci.h>
void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
- s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+ }
}
void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
- s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+ }
}
void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
help
Enable S5P6440 CPU support
+config S5P6440_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
config MACH_SMDK6440
bool "SMDK6440"
select CPU_S5P6440
- select SAMSUNG_DEV_TS
- select SAMSUNG_DEV_ADC
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
select S3C_DEV_WDT
- select HAVE_S3C2410_WATCHDOG
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_TS
+ select S5P6440_SETUP_I2C1
help
Machine support for the Samsung SMDK6440
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-$(CONFIG_S5P6440_SETUP_I2C1) += setup-i2c1.o
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s5p6440.h>
+#include <plat/adc-core.h>
static void s5p6440_idle(void)
{
void __init s5p6440_map_io(void)
{
/* initialize any device information early */
- s3c_device_adc.name = "s3c64xx-adc";
+ s3c_adc_setname("s3c64xx-adc");
}
void __init s5p6440_init_clocks(int xtal)
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
-#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/gpio.h>
+
#include <mach/map.h>
-#include <mach/gpio.h>
#include <mach/regs-gpio.h>
+
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
#define IRQ_DISPCON3 S5P_IRQ_VIC1(19)
#define IRQ_FIMGVG S5P_IRQ_VIC1(20)
#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21)
-#define IRQ_PMUIRQ S5P_IRQ_VIC1(23)
+#define IRQ_PMU S5P_IRQ_VIC1(23)
#define IRQ_HSMMC0 S5P_IRQ_VIC1(24)
#define IRQ_HSMMC1 S5P_IRQ_VIC1(25)
#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */
#define S5P_PA_TIMER S5P6440_PA_TIMER
#define S5P6440_PA_RTC (0xEA100000)
-#define S5P_PA_RTC S5P6440_PA_RTC
#define S5P6440_PA_WDT (0xEA200000)
#define S5P_PA_WDT S5P6440_PA_WDT
#define S5P_SZ_UART SZ_256
#define S5P6440_PA_IIC0 (0xEC104000)
+#define S5P6440_PA_IIC1 (0xEC20F000)
#define S5P6440_PA_SPI0 0xEC400000
#define S5P6440_PA_SPI1 0xEC500000
/* compatibiltiy defines. */
#define S3C_PA_UART S5P6440_PA_UART
#define S3C_PA_IIC S5P6440_PA_IIC0
+#define S3C_PA_RTC S5P6440_PA_RTC
+#define S3C_PA_IIC1 S5P6440_PA_IIC1
#define S3C_PA_WDT S5P6440_PA_WDT
#define SAMSUNG_PA_ADC S5P6440_PA_ADC
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
+#include <plat/system-reset.h>
-static void arch_reset(char mode, const char *cmd)
+static void arch_idle(void)
{
/* nothing here yet */
}
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/i2c.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <mach/regs-clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/iic.h>
#include <plat/pll.h>
#include <plat/adc.h>
#include <plat/ts.h>
-#define S5P6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5P6440_ULCON_DEFAULT S3C2410_LCON_CS8
+#define SMDK6440_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5P6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+#define SMDK6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S3C2440_UFCON_TXTRIG16 | \
S3C2410_UFCON_RXTRIG8)
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5P6440_UCON_DEFAULT,
- .ulcon = S5P6440_ULCON_DEFAULT,
- .ufcon = S5P6440_UFCON_DEFAULT,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5P6440_UCON_DEFAULT,
- .ulcon = S5P6440_ULCON_DEFAULT,
- .ufcon = S5P6440_UFCON_DEFAULT,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5P6440_UCON_DEFAULT,
- .ulcon = S5P6440_ULCON_DEFAULT,
- .ufcon = S5P6440_UFCON_DEFAULT,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5P6440_UCON_DEFAULT,
- .ulcon = S5P6440_ULCON_DEFAULT,
- .ufcon = S5P6440_UFCON_DEFAULT,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
},
};
static struct platform_device *smdk6440_devices[] __initdata = {
&s5p6440_device_iis,
&s3c_device_adc,
+ &s3c_device_rtc,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
&s3c_device_ts,
&s3c_device_wdt,
};
+static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
+ { I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = {
+ /* To be populated */
+};
+
static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
.delay = 10000,
.presc = 49,
{
s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ /* I2C */
+ s3c_i2c0_set_platdata(NULL);
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(0, smdk6440_i2c_devs0,
+ ARRAY_SIZE(smdk6440_i2c_devs0));
+ i2c_register_board_info(1, smdk6440_i2c_devs1,
+ ARRAY_SIZE(smdk6440_i2c_devs1));
+
platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
}
struct platform_device; /* don't need the contents */
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
#include <plat/iic.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- /* Will be populated later */
+ s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP);
}
--- /dev/null
+/* linux/arch/arm/mach-s5p6440/setup-i2c1.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C1 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6));
+ s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6));
+ s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP);
+}
config MACH_SMDK6442
bool "SMDK6442"
select CPU_S5P6442
+ select S3C_DEV_WDT
help
Machine support for Samsung SMDK6442
.parent = &clk_pclkd1,
.enable = s5p6442_clk_ip3_ctrl,
.ctrlbit = (1<<19),
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip3_ctrl,
+ .ctrlbit = (1 << 22),
}, {
.name = "timers",
.id = -1,
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
-#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
/* VIC1 */
-#define IRQ_nPMUIRQ S5P_IRQ_VIC1(0)
+#define IRQ_PMU S5P_IRQ_VIC1(0)
#define IRQ_ONENAND S5P_IRQ_VIC1(7)
#define IRQ_UART0 S5P_IRQ_VIC1(10)
#define IRQ_UART1 S5P_IRQ_VIC1(11)
#define S5P6442_PA_SYSTIMER (0xEA100000)
+#define S5P6442_PA_WATCHDOG (0xEA200000)
+
#define S5P6442_PA_UART (0xEC000000)
#define S5P_PA_UART0 (S5P6442_PA_UART + 0x0)
#define S5P6442_PA_PCM1 0xF2500000
/* compatibiltiy defines. */
+#define S3C_PA_WDT S5P6442_PA_WATCHDOG
#define S3C_PA_UART S5P6442_PA_UART
#define S3C_PA_IIC S5P6442_PA_IIC0
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
+#include <plat/system-reset.h>
-static void arch_reset(char mode, const char *cmd)
+static void arch_idle(void)
{
/* nothing here yet */
}
#include <plat/cpu.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5P6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5P6442_ULCON_DEFAULT S3C2410_LCON_CS8
+#define SMDK6442_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5P6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+#define SMDK6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5P6442_UCON_DEFAULT,
- .ulcon = S5P6442_ULCON_DEFAULT,
- .ufcon = S5P6442_UFCON_DEFAULT,
+ .ucon = SMDK6442_UCON_DEFAULT,
+ .ulcon = SMDK6442_ULCON_DEFAULT,
+ .ufcon = SMDK6442_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5P6442_UCON_DEFAULT,
- .ulcon = S5P6442_ULCON_DEFAULT,
- .ufcon = S5P6442_UFCON_DEFAULT,
+ .ucon = SMDK6442_UCON_DEFAULT,
+ .ulcon = SMDK6442_ULCON_DEFAULT,
+ .ufcon = SMDK6442_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5P6442_UCON_DEFAULT,
- .ulcon = S5P6442_ULCON_DEFAULT,
- .ufcon = S5P6442_UFCON_DEFAULT,
+ .ucon = SMDK6442_UCON_DEFAULT,
+ .ulcon = SMDK6442_ULCON_DEFAULT,
+ .ufcon = SMDK6442_UFCON_DEFAULT,
},
};
static struct platform_device *smdk6442_devices[] __initdata = {
&s5p6442_device_iis0,
+ &s3c_device_wdt,
};
static void __init smdk6442_map_io(void)
help
Common setup code for i2c bus 1.
+config S5PC100_SETUP_IDE
+ bool
+ help
+ Common setup code for S5PC100 IDE GPIO configurations
+
+config S5PC100_SETUP_KEYPAD
+ bool
+ help
+ Common setup code for KEYPAD GPIO configurations.
+
config S5PC100_SETUP_SDHCI
bool
select S5PC100_SETUP_SDHCI_GPIO
bool "SMDKC100"
select CPU_S5PC100
select S3C_DEV_FB
- select S3C_DEV_I2C1
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_IDE
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_TS
select S5PC100_SETUP_FB_24BPP
select S5PC100_SETUP_I2C1
+ select S5PC100_SETUP_IDE
+ select S5PC100_SETUP_KEYPAD
select S5PC100_SETUP_SDHCI
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
help
Machine support for the Samsung SMDKC100
obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 7),
}, {
- .name = "keyif",
+ .name = "keypad",
.id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_5_ctrl,
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
}, {
.clk = {
- .name = "mmc_bus",
+ .name = "sclk_mmc",
.id = 0,
.ctrlbit = (1 << 12),
.enable = s5pc100_sclk1_ctrl,
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
}, {
.clk = {
- .name = "mmc_bus",
+ .name = "sclk_mmc",
.id = 1,
.ctrlbit = (1 << 13),
.enable = s5pc100_sclk1_ctrl,
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
}, {
.clk = {
- .name = "mmc_bus",
+ .name = "sclk_mmc",
.id = 2,
.ctrlbit = (1 << 14),
.enable = s5pc100_sclk1_ctrl,
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
+#include <plat/ata-core.h>
#include <plat/iic-core.h>
#include <plat/sdhci.h>
+#include <plat/adc-core.h>
#include <plat/onenand-core.h>
+#include <plat/fb-core.h>
#include <plat/s5pc100.h>
s5pc100_default_sdhci1();
s5pc100_default_sdhci2();
+ s3c_adc_setname("s3c64xx-adc");
+
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_onenand_setname("s5pc100-onenand");
+ s3c_fb_setname("s5pc100-fb");
+ s3c_cfcon_setname("s5pc100-pata");
}
void __init s5pc100_init_clocks(int xtal)
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
-#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
-#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
/* VIC1: ARM, power, memory, connectivity */
-#define IRQ_CORTEX0 S5P_IRQ_VIC1(0)
+#define IRQ_PMU S5P_IRQ_VIC1(0)
#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
#define IRQ_ONENAND S5P_IRQ_VIC1(7)
#define IRQ_NFC S5P_IRQ_VIC1(8)
-#define IRQ_CFC S5P_IRQ_VIC1(9)
+#define IRQ_CFCON S5P_IRQ_VIC1(9)
#define IRQ_UART0 S5P_IRQ_VIC1(10)
#define IRQ_UART1 S5P_IRQ_VIC1(11)
#define IRQ_UART2 S5P_IRQ_VIC1(12)
#define S5PC100_PA_ONENAND (0xE7100000)
+#define S5PC100_PA_CFCON (0xE7800000)
+
/* DMA */
#define S5PC100_PA_MDMA (0xE8100000)
#define S5PC100_PA_PDMA0 (0xE9000000)
#define S5PC100_PA_SYSTIMER (0xEA100000)
+#define S5PC100_PA_WATCHDOG (0xEA200000)
+#define S5PC100_PA_RTC (0xEA300000)
+
#define S5PC100_PA_UART (0xEC000000)
#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0)
#define S5PC100_PA_FB (0xEE000000)
+#define S5PC100_PA_FIMC0 (0xEE200000)
+#define S5PC100_PA_FIMC1 (0xEE300000)
+#define S5PC100_PA_FIMC2 (0xEE400000)
+
#define S5PC100_PA_I2S0 (0xF2000000)
#define S5PC100_PA_I2S1 (0xF2100000)
#define S5PC100_PA_I2S2 (0xF2200000)
#define S5PC100_PA_PCM0 0xF2400000
#define S5PC100_PA_PCM1 0xF2500000
+#define S5PC100_PA_TSADC (0xF3000000)
+
/* KEYPAD */
#define S5PC100_PA_KEYPAD (0xF3100000)
#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
+#define S3C_PA_WDT S5PC100_PA_WATCHDOG
#define S3C_PA_TSADC S5PC100_PA_TSADC
#define S3C_PA_ONENAND S5PC100_PA_ONENAND
#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
#define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF
+#define S3C_PA_RTC S5PC100_PA_RTC
+
+#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
+#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
+
+#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
+#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
+#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
#endif /* __ASM_ARCH_C100_MAP_H */
#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000)
+#define S5PC100_MEM_SYS_CFG S5PC100_REG_OTHERS(0x200)
#define S5PC100_SWRESET_RESETVAL 0xc100
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
+
#endif /* __ASM_ARCH_REGS_CLOCK_H */
#define BLENDCON (0x260)
#define BLENDCON_8BIT_ALPHA (1 << 0)
-/* Per-window palette base addresses (start of palette memory).
- * Each window palette area consists of 256 32-bit entries.
- * START is the first address (entry 0th), END is the address of 255th entry.
- */
-#define WIN0_PAL_BASE (0x2400)
-#define WIN0_PAL_END (0x27fc)
-#define WIN1_PAL_BASE (0x2800)
-#define WIN1_PAL_END (0x2bfc)
-#define WIN2_PAL_BASE (0x2c00)
-#define WIN2_PAL_END (0x2ffc)
-#define WIN3_PAL_BASE (0x3000)
-#define WIN3_PAL_END (0x33fc)
-#define WIN4_PAL_BASE (0x3400)
-#define WIN4_PAL_END (0x37fc)
-
-#define WIN0_PAL(_entry) (WIN0_PAL_BASE + ((_entry) * 4))
-#define WIN1_PAL(_entry) (WIN1_PAL_BASE + ((_entry) * 4))
-#define WIN2_PAL(_entry) (WIN2_PAL_BASE + ((_entry) * 4))
-#define WIN3_PAL(_entry) (WIN3_PAL_BASE + ((_entry) * 4))
-#define WIN4_PAL(_entry) (WIN4_PAL_BASE + ((_entry) * 4))
-
-static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
-{
- switch (window) {
- case 0: return WIN0_PAL(reg);
- case 1: return WIN1_PAL(reg);
- case 2: return WIN2_PAL(reg);
- case 3: return WIN3_PAL(reg);
- case 4: return WIN4_PAL(reg);
- }
-
- BUG();
-}
-
#endif /* __ASM_ARCH_REGS_FB_H */
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-#include <linux/io.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
+#include <plat/system-reset.h>
static void arch_idle(void)
{
/* nothing here yet */
}
-static void arch_reset(char mode, const char *cmd)
-{
- __raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET);
- return;
-}
#endif /* __ASM_ARCH_IRQ_H */
#include <linux/i2c.h>
#include <linux/fb.h>
#include <linux/delay.h>
+#include <linux/input.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/s5pc100.h>
#include <plat/fb.h>
#include <plat/iic.h>
+#include <plat/ata.h>
+#include <plat/adc.h>
+#include <plat/keypad.h>
+#include <plat/ts.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5PC100_ULCON_DEFAULT S3C2410_LCON_CS8
+#define SMDKC100_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5PC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+#define SMDKC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S3C2440_UFCON_RXTRIG8 | \
S3C2440_UFCON_TXTRIG16)
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5PC100_UCON_DEFAULT,
- .ulcon = S5PC100_ULCON_DEFAULT,
- .ufcon = S5PC100_UFCON_DEFAULT,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5PC100_UCON_DEFAULT,
- .ulcon = S5PC100_ULCON_DEFAULT,
- .ufcon = S5PC100_UFCON_DEFAULT,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5PC100_UCON_DEFAULT,
- .ulcon = S5PC100_ULCON_DEFAULT,
- .ufcon = S5PC100_UFCON_DEFAULT,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5PC100_UCON_DEFAULT,
- .ulcon = S5PC100_ULCON_DEFAULT,
- .ufcon = S5PC100_UFCON_DEFAULT,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
},
};
static struct s3c_fb_pd_win smdkc100_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
- .pixclock = 1000000000000ULL / ((8+13+3+800)*(7+5+1+480)*80),
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
.vsync_len = 1,
.xres = 800,
.yres = 480,
+ .refresh = 80,
},
.max_bpp = 32,
.default_bpp = 16,
.setup_gpio = s5pc100_fb_gpio_setup_24bpp,
};
+static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = {
+ .setup_gpio = s5pc100_ide_setup_gpio,
+};
+
+static uint32_t smdkc100_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+ KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+ KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+ KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdkc100_keymap_data __initdata = {
+ .keymap = smdkc100_keymap,
+ .keymap_size = ARRAY_SIZE(smdkc100_keymap),
+};
+
+static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = {
+ .keymap_data = &smdkc100_keymap_data,
+ .rows = 2,
+ .cols = 8,
+};
+
static struct platform_device *smdkc100_devices[] __initdata = {
+ &s3c_device_adc,
+ &s3c_device_cfcon,
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_fb,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
+ &s3c_device_ts,
+ &s3c_device_wdt,
&smdkc100_lcd_powerdev,
&s5pc100_device_iis0,
+ &samsung_device_keypad,
&s5pc100_device_ac97,
+ &s3c_device_rtc,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
};
static void __init smdkc100_map_io(void)
static void __init smdkc100_machine_init(void)
{
+ s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
/* I2C */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_fb_set_platdata(&smdkc100_lcd_pdata);
+ s3c_ide_set_platdata(&smdkc100_ide_pdata);
+
+ samsung_keypad_set_platdata(&smdkc100_keypad_data);
/* LCD init */
gpio_request(S5PC100_GPD(0), "GPD");
--- /dev/null
+/* linux/arch/arm/mach-s5pc100/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PC100 setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+void s5pc100_ide_setup_gpio(void)
+{
+ u32 reg;
+ u32 gpio = 0;
+
+ /* Independent CF interface, CF chip select configuration */
+ reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
+ writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
+
+ /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
+ for (gpio = S5PC100_GPJ0(0); gpio <= S5PC100_GPJ0(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ /*CF_Data[0 - 7] */
+ for (gpio = S5PC100_GPJ2(0); gpio <= S5PC100_GPJ2(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ /* CF_Data[8 - 15] */
+ for (gpio = S5PC100_GPJ3(0); gpio <= S5PC100_GPJ3(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
+ for (gpio = S5PC100_GPJ4(0); gpio <= S5PC100_GPJ4(3); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ /* EBI_OE, EBI_WE */
+ for (gpio = S5PC100_GPK0(6); gpio <= S5PC100_GPK0(7); gpio++)
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0));
+
+ /* CF_OE, CF_WE */
+ for (gpio = S5PC100_GPK1(6); gpio <= S5PC100_GPK1(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ /* CF_CD */
+ s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE);
+}
--- /dev/null
+/* linux/arch/arm/mach-s5pc100/setup-keypad.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * GPIO configuration for S5PC100 KeyPad device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
+ end = S5PC100_GPH3(rows);
+ for (gpio = S5PC100_GPH3(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
+ end = S5PC100_GPH2(cols);
+ for (gpio = S5PC100_GPH2(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+}
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
unsigned int num;
}
}
- s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+ }
}
void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
- s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+ }
}
void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
- s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+ }
}
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
char *s5pc100_hsmmc_clksrcs[4] = {
- [0] = "hsmmc",
- [1] = "hsmmc",
- /* [2] = "mmc_bus", not yet successfully used yet */
- /* [3] = "48m", - note not successfully used yet */
+ [0] = "hsmmc", /* HCLK */
+ /* [1] = "hsmmc", - duplicate HCLK entry */
+ [2] = "sclk_mmc", /* mmc_bus */
+ /* [3] = "48m", - note not successfully used yet */
};
help
Common setup code for i2c bus 2.
+config S5PV210_SETUP_IDE
+ bool
+ help
+ Common setup code for S5PV210 IDE GPIO configurations
+
config S5PV210_SETUP_FB_24BPP
bool
help
Common setup code for S5PV210 with an 24bpp RGB display helper.
+config S5PV210_SETUP_KEYPAD
+ bool
+ help
+ Common setup code for keypad.
+
config S5PV210_SETUP_SDHCI
bool
select S5PV210_SETUP_SDHCI_GPIO
help
Common setup code for SDHCI gpio.
-# machine support
+config S5PC110_DEV_ONENAND
+ bool
+ help
+ Compile in platform device definition for OneNAND1 controller
+
+menu "S5PC110 Machines"
config MACH_AQUILA
- bool "Samsung Aquila"
+ bool "Aquila"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
- select S5PV210_SETUP_FB_24BPP
select S3C_DEV_FB
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S5PC110_DEV_ONENAND
+ select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_SDHCI
help
Machine support for the Samsung Aquila target based on S5PC110 SoC
bool "GONI"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
+ select S3C_DEV_FB
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S5PC110_DEV_ONENAND
+ select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_SDHCI
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
-config S5PC110_DEV_ONENAND
- bool
+config MACH_SMDKC110
+ bool "SMDKC110"
+ select CPU_S5PV210
+ select ARCH_SPARSEMEM_ENABLE
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C2
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_IDE
+ select S5PV210_SETUP_I2C1
+ select S5PV210_SETUP_I2C2
+ select S5PV210_SETUP_IDE
help
- Compile in platform device definition for OneNAND1 controller
+ Machine support for Samsung SMDKC110
+ S5PC110(MCP) is one of package option of S5PV210
+
+endmenu
+
+menu "S5PV210 Machines"
config MACH_SMDKV210
bool "SMDKV210"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C2
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_IDE
+ select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_TS
- select S3C_DEV_WDT
- select HAVE_S3C2410_WATCHDOG
+ select S5PV210_SETUP_I2C1
+ select S5PV210_SETUP_I2C2
+ select S5PV210_SETUP_IDE
+ select S5PV210_SETUP_KEYPAD
+ select S5PV210_SETUP_SDHCI
help
Machine support for Samsung SMDKV210
-config MACH_SMDKC110
- bool "SMDKC110"
- select CPU_S5PV210
- select ARCH_SPARSEMEM_ENABLE
- select S3C_DEV_WDT
- select HAVE_S3C2410_WATCHDOG
- help
- Machine support for Samsung SMDKC110
- S5PC110(MCP) is one of package option of S5PV210
+endmenu
endif
obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
+obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
+#include <plat/fb-core.h>
#include <plat/s5pv210.h>
+#include <plat/adc-core.h>
+#include <plat/ata-core.h>
+#include <plat/fimc-core.h>
#include <plat/iic-core.h>
+#include <plat/keypad-core.h>
#include <plat/sdhci.h>
+#include <plat/reset.h>
/* Initial IO mappings */
local_irq_enable();
}
+static void s5pv210_sw_reset(void)
+{
+ __raw_writel(0x1, S5P_SWRESET);
+}
+
/* s5pv210_map_io
*
* register the standard cpu IO areas
void __init s5pv210_map_io(void)
{
-#ifdef CONFIG_S3C_DEV_ADC
- s3c_device_adc.name = "s3c64xx-adc";
-#endif
-
iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
/* initialise device information early */
s5pv210_default_sdhci0();
s5pv210_default_sdhci1();
s5pv210_default_sdhci2();
+ s5pv210_default_sdhci3();
+
+ s3c_adc_setname("s3c64xx-adc");
+
+ s3c_cfcon_setname("s5pv210-pata");
+
+ s3c_fimc_setname(0, "s5pv210-fimc");
+ s3c_fimc_setname(1, "s5pv210-fimc");
+ s3c_fimc_setname(2, "s5pv210-fimc");
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_i2c2_setname("s3c2440-i2c");
+
+ s3c_fb_setname("s5pv210-fb");
+
+ /* Use s5pv210-keypad instead of samsung-keypad */
+ samsung_keypad_setname("s5pv210-keypad");
}
void __init s5pv210_init_clocks(int xtal)
/* set idle function */
pm_idle = s5pv210_idle;
+ /* set sw_reset function */
+ s5p_reset_hook = s5pv210_sw_reset;
+
return sysdev_register(&s5pv210_sysdev);
}
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
-#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
},
[1] = {
.start = S5PC110_PA_ONENAND_DMA,
- .end = S5PC110_PA_ONENAND_DMA + SZ_2K - 1,
+ .end = S5PC110_PA_ONENAND_DMA + SZ_8K - 1,
.flags = IORESOURCE_MEM,
},
+ [2] = {
+ .start = IRQ_ONENAND_AUDI,
+ .end = IRQ_ONENAND_AUDI,
+ .flags = IORESOURCE_IRQ,
+ },
};
struct platform_device s5pc110_device_onenand = {
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
.ngpio = S5PV210_GPIO_MP03_NR,
.label = "MP03",
},
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_MP04(0),
+ .ngpio = S5PV210_GPIO_MP04_NR,
+ .label = "MP04",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_MP05(0),
+ .ngpio = S5PV210_GPIO_MP05_NR,
+ .label = "MP05",
+ },
}, {
.base = (S5P_VA_GPIO + 0xC00),
.config = &gpio_cfg_noint,
#define S5PV210_GPIO_MP01_NR (8)
#define S5PV210_GPIO_MP02_NR (4)
#define S5PV210_GPIO_MP03_NR (8)
+#define S5PV210_GPIO_MP04_NR (8)
+#define S5PV210_GPIO_MP05_NR (8)
/* GPIO bank numbers */
S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
+ S5PV210_GPIO_MP04_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03),
+ S5PV210_GPIO_MP05_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04),
};
/* S5PV210 GPIO number definitions */
#define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr))
#define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr))
#define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr))
+#define S5PV210_MP04(_nr) (S5PV210_GPIO_MP04_START + (_nr))
+#define S5PV210_MP05(_nr) (S5PV210_GPIO_MP05_START + (_nr))
/* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
+#define S5PV210_GPIO_END (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1)
#define S3C_GPIO_END S5PV210_GPIO_END
-/* define the number of gpios we need to the one after the MP03() range */
-#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \
+/* define the number of gpios we need to the one after the MP05() range */
+#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
#include <asm-generic/gpio.h>
/* VIC1: ARM, Power, Memory, Connectivity, Storage */
-#define IRQ_CORTEX0 S5P_IRQ_VIC1(0)
+#define IRQ_PMU S5P_IRQ_VIC1(0)
#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
#define IRQ_ONENAND S5P_IRQ_VIC1(7)
#define IRQ_NFC S5P_IRQ_VIC1(8)
-#define IRQ_CFC S5P_IRQ_VIC1(9)
+#define IRQ_CFCON S5P_IRQ_VIC1(9)
#define IRQ_UART0 S5P_IRQ_VIC1(10)
#define IRQ_UART1 S5P_IRQ_VIC1(11)
#define IRQ_UART2 S5P_IRQ_VIC1(12)
#define S5PV210_PA_SPI0 0xE1300000
#define S5PV210_PA_SPI1 0xE1400000
+#define S5PV210_PA_KEYPAD (0xE1600000)
+
#define S5PV210_PA_IIC0 (0xE1800000)
#define S5PV210_PA_IIC1 (0xFAB00000)
#define S5PV210_PA_IIC2 (0xE1A00000)
#define S5PV210_PA_WATCHDOG (0xE2700000)
+#define S5PV210_PA_RTC (0xE2800000)
#define S5PV210_PA_UART (0xE2900000)
#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0)
#define S5PV210_PA_SROMC (0xE8000000)
+#define S5PV210_PA_CFCON (0xE8200000)
+
#define S5PV210_PA_MDMA 0xFA200000
#define S5PV210_PA_PDMA0 0xE0900000
#define S5PV210_PA_PDMA1 0xE0A00000
#define S5PV210_PA_FB (0xF8000000)
+#define S5PV210_PA_FIMC0 (0xFB200000)
+#define S5PV210_PA_FIMC1 (0xFB300000)
+#define S5PV210_PA_FIMC2 (0xFB400000)
+
#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
#define S5PV210_PA_VIC0 (0xF2000000)
#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2)
+#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3)
#define S3C_PA_IIC S5PV210_PA_IIC0
#define S3C_PA_IIC1 S5PV210_PA_IIC1
#define S3C_PA_IIC2 S5PV210_PA_IIC2
#define S3C_PA_FB S5PV210_PA_FB
+#define S3C_PA_RTC S5PV210_PA_RTC
#define S3C_PA_WDT S5PV210_PA_WATCHDOG
+#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
+#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
+#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
#define SAMSUNG_PA_ADC S5PV210_PA_ADC
+#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD
#endif /* __ASM_ARCH_MAP_H */
#define PHYS_OFFSET UL(0x20000000)
#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
-/* Maximum of 256MiB in one bank */
-#define MAX_PHYSMEM_BITS 32
+/*
+ * Sparsemem support
+ * Physical memory can be located from 0x20000000 to 0x7fffffff,
+ * so MAX_PHYSMEM_BITS is 31.
+ */
+
+#define MAX_PHYSMEM_BITS 31
#define SECTION_SIZE_BITS 28
#endif /* __ASM_ARCH_MEMORY_H */
#define S5P_CLKDIV0_PCLK66_SHIFT (28)
#define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
+#define S5P_SWRESET S5P_CLKREG(0x2000)
+
/* Registers related to power management */
#define S5P_PWR_CFG S5P_CLKREG(0xC000)
#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004)
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
+#include <plat/system-reset.h>
-static void arch_reset(char mode, const char *cmd)
+static void arch_idle(void)
{
/* nothing here yet */
}
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mfd/max8998.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-fb.h>
+#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
+#include <plat/fimc-core.h>
+#include <plat/sdhci.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+#define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
+#define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
-static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
+ /*
+ * Actually UART0 can support 256 bytes fifo, but aquila board
+ * supports 128 bytes fifo because of initial chip bug
+ */
+ .ufcon = AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
+ .ufcon = AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
+ .ufcon = AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
+ .ufcon = AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
};
/* Frame Buffer */
static struct s3c_fb_pd_win aquila_fb_win0 = {
.win_mode = {
- .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
.left_margin = 16,
.right_margin = 16,
.upper_margin = 3,
static struct s3c_fb_pd_win aquila_fb_win1 = {
.win_mode = {
- .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
.left_margin = 16,
.right_margin = 16,
.upper_margin = 3,
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
+/* MAX8998 regulators */
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+
+static struct regulator_init_data aquila_ldo2_data = {
+ .constraints = {
+ .name = "VALIVE_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data aquila_ldo3_data = {
+ .constraints = {
+ .name = "VUSB/MIPI_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo4_data = {
+ .constraints = {
+ .name = "VDAC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo5_data = {
+ .constraints = {
+ .name = "VTF_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo6_data = {
+ .constraints = {
+ .name = "VCC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo7_data = {
+ .constraints = {
+ .name = "VCC_3.0V",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .apply_uV = 1,
+ .boot_on = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo8_data = {
+ .constraints = {
+ .name = "VUSB/VADC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo9_data = {
+ .constraints = {
+ .name = "VCC/VCAM_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo10_data = {
+ .constraints = {
+ .name = "VPLL_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .boot_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo11_data = {
+ .constraints = {
+ .name = "CAM_IO_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo12_data = {
+ .constraints = {
+ .name = "CAM_ISP_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo13_data = {
+ .constraints = {
+ .name = "CAM_A_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo14_data = {
+ .constraints = {
+ .name = "CAM_CIF_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo15_data = {
+ .constraints = {
+ .name = "CAM_AF_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo16_data = {
+ .constraints = {
+ .name = "VMIPI_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo17_data = {
+ .constraints = {
+ .name = "CAM_8M_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+/* BUCK */
+static struct regulator_consumer_supply buck1_consumer[] = {
+ { .supply = "vddarm", },
+};
+
+static struct regulator_consumer_supply buck2_consumer[] = {
+ { .supply = "vddint", },
+};
+
+static struct regulator_init_data aquila_buck1_data = {
+ .constraints = {
+ .name = "VARM_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
+ .consumer_supplies = buck1_consumer,
+};
+
+static struct regulator_init_data aquila_buck2_data = {
+ .constraints = {
+ .name = "VINT_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
+ .consumer_supplies = buck2_consumer,
+};
+
+static struct regulator_init_data aquila_buck3_data = {
+ .constraints = {
+ .name = "VCC_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data aquila_buck4_data = {
+ .constraints = {
+ .name = "CAM_CORE_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct max8998_regulator_data aquila_regulators[] = {
+ { MAX8998_LDO2, &aquila_ldo2_data },
+ { MAX8998_LDO3, &aquila_ldo3_data },
+ { MAX8998_LDO4, &aquila_ldo4_data },
+ { MAX8998_LDO5, &aquila_ldo5_data },
+ { MAX8998_LDO6, &aquila_ldo6_data },
+ { MAX8998_LDO7, &aquila_ldo7_data },
+ { MAX8998_LDO8, &aquila_ldo8_data },
+ { MAX8998_LDO9, &aquila_ldo9_data },
+ { MAX8998_LDO10, &aquila_ldo10_data },
+ { MAX8998_LDO11, &aquila_ldo11_data },
+ { MAX8998_LDO12, &aquila_ldo12_data },
+ { MAX8998_LDO13, &aquila_ldo13_data },
+ { MAX8998_LDO14, &aquila_ldo14_data },
+ { MAX8998_LDO15, &aquila_ldo15_data },
+ { MAX8998_LDO16, &aquila_ldo16_data },
+ { MAX8998_LDO17, &aquila_ldo17_data },
+ { MAX8998_BUCK1, &aquila_buck1_data },
+ { MAX8998_BUCK2, &aquila_buck2_data },
+ { MAX8998_BUCK3, &aquila_buck3_data },
+ { MAX8998_BUCK4, &aquila_buck4_data },
+};
+
+static struct max8998_platform_data aquila_max8998_pdata = {
+ .num_regulators = ARRAY_SIZE(aquila_regulators),
+ .regulators = aquila_regulators,
+};
+#endif
+
+/* GPIO I2C PMIC */
+#define AP_I2C_GPIO_PMIC_BUS_4 4
+static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
+ .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
+ .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
+};
+
+static struct platform_device aquila_i2c_gpio_pmic = {
+ .name = "i2c-gpio",
+ .id = AP_I2C_GPIO_PMIC_BUS_4,
+ .dev = {
+ .platform_data = &aquila_i2c_gpio_pmic_data,
+ },
+};
+
+static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+ {
+ /* 0xCC when SRAD = 0 */
+ I2C_BOARD_INFO("max8998", 0xCC >> 1),
+ .platform_data = &aquila_max8998_pdata,
+ },
+#endif
+};
+
+/* PMIC Power button */
+static struct gpio_keys_button aquila_gpio_keys_table[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = S5PV210_GPH2(6),
+ .desc = "gpio-keys: KEY_POWER",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ },
+};
+
+static struct gpio_keys_platform_data aquila_gpio_keys_data = {
+ .buttons = aquila_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(aquila_gpio_keys_table),
+};
+
+static struct platform_device aquila_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &aquila_gpio_keys_data,
+ },
+};
+
+static void __init aquila_pmic_init(void)
+{
+ /* AP_PMIC_IRQ: EINT7 */
+ s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
+
+ /* nPower: EINT22 */
+ s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
+}
+
+/* MoviNAND */
+static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+};
+
+/* Wireless LAN */
+static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_EXTERNAL,
+ /* ext_cd_{init,cleanup} callbacks will be added later */
+};
+
+/* External Flash */
+#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4)
+#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4)
+static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = AQUILA_EXT_FLASH_CD,
+ .ext_cd_gpio_invert = 1,
+};
+
+static void aquila_setup_sdhci(void)
+{
+ gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
+ gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
+
+ s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
+ s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
+ s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
+};
+
static struct platform_device *aquila_devices[] __initdata = {
+ &aquila_i2c_gpio_pmic,
+ &aquila_device_gpiokeys,
&s3c_device_fb,
+ &s5pc110_device_onenand,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
};
static void __init aquila_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+ s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
}
static void __init aquila_machine_init(void)
{
+ /* PMIC */
+ aquila_pmic_init();
+ i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
+ ARRAY_SIZE(i2c_gpio_pmic_devs));
+ /* SDHCI */
+ aquila_setup_sdhci();
+
+ s3c_fimc_setname(0, "s5p-fimc");
+ s3c_fimc_setname(1, "s5p-fimc");
+ s3c_fimc_setname(2, "s5p-fimc");
+
/* FB */
s3c_fb_set_platdata(&aquila_lcd_pdata);
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mfd/max8998.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
+#include <mach/regs-fb.h>
+#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/sdhci.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+#define GONI_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
+#define GONI_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = GONI_UCON_DEFAULT,
+ .ulcon = GONI_ULCON_DEFAULT,
+ .ufcon = GONI_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG256 | S5PV210_UFCON_RXTRIG256,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = GONI_UCON_DEFAULT,
+ .ulcon = GONI_ULCON_DEFAULT,
+ .ufcon = GONI_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = GONI_UCON_DEFAULT,
+ .ulcon = GONI_ULCON_DEFAULT,
+ .ufcon = GONI_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = GONI_UCON_DEFAULT,
+ .ulcon = GONI_ULCON_DEFAULT,
+ .ufcon = GONI_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win goni_fb_win0 = {
+ .win_mode = {
+ .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55),
+ .left_margin = 16,
+ .right_margin = 16,
+ .upper_margin = 3,
+ .lower_margin = 28,
+ .hsync_len = 2,
+ .vsync_len = 2,
+ .xres = 480,
+ .yres = 800,
+ .refresh = 55,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata goni_lcd_pdata __initdata = {
+ .win[0] = &goni_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+ VIDCON0_CLKSEL_LCD,
+ .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+ | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
+};
+
+/* MAX8998 regulators */
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+
+static struct regulator_init_data goni_ldo2_data = {
+ .constraints = {
+ .name = "VALIVE_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data goni_ldo3_data = {
+ .constraints = {
+ .name = "VUSB/MIPI_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo4_data = {
+ .constraints = {
+ .name = "VDAC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo5_data = {
+ .constraints = {
+ .name = "VTF_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo6_data = {
+ .constraints = {
+ .name = "VCC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo7_data = {
+ .constraints = {
+ .name = "VLCD_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo8_data = {
+ .constraints = {
+ .name = "VUSB/VADC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo9_data = {
+ .constraints = {
+ .name = "VCC/VCAM_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo10_data = {
+ .constraints = {
+ .name = "VPLL_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .boot_on = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo11_data = {
+ .constraints = {
+ .name = "CAM_IO_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo12_data = {
+ .constraints = {
+ .name = "CAM_ISP_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo13_data = {
+ .constraints = {
+ .name = "CAM_A_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo14_data = {
+ .constraints = {
+ .name = "CAM_CIF_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo15_data = {
+ .constraints = {
+ .name = "CAM_AF_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo16_data = {
+ .constraints = {
+ .name = "VMIPI_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data goni_ldo17_data = {
+ .constraints = {
+ .name = "VCC_3.0V_LCD",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+/* BUCK */
+static struct regulator_consumer_supply buck1_consumer[] = {
+ { .supply = "vddarm", },
+};
+
+static struct regulator_consumer_supply buck2_consumer[] = {
+ { .supply = "vddint", },
+};
+
+static struct regulator_init_data goni_buck1_data = {
+ .constraints = {
+ .name = "VARM_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
+ .consumer_supplies = buck1_consumer,
+};
+
+static struct regulator_init_data goni_buck2_data = {
+ .constraints = {
+ .name = "VINT_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
+ .consumer_supplies = buck2_consumer,
+};
+
+static struct regulator_init_data goni_buck3_data = {
+ .constraints = {
+ .name = "VCC_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data goni_buck4_data = {
+ .constraints = {
+ .name = "CAM_CORE_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct max8998_regulator_data goni_regulators[] = {
+ { MAX8998_LDO2, &goni_ldo2_data },
+ { MAX8998_LDO3, &goni_ldo3_data },
+ { MAX8998_LDO4, &goni_ldo4_data },
+ { MAX8998_LDO5, &goni_ldo5_data },
+ { MAX8998_LDO6, &goni_ldo6_data },
+ { MAX8998_LDO7, &goni_ldo7_data },
+ { MAX8998_LDO8, &goni_ldo8_data },
+ { MAX8998_LDO9, &goni_ldo9_data },
+ { MAX8998_LDO10, &goni_ldo10_data },
+ { MAX8998_LDO11, &goni_ldo11_data },
+ { MAX8998_LDO12, &goni_ldo12_data },
+ { MAX8998_LDO13, &goni_ldo13_data },
+ { MAX8998_LDO14, &goni_ldo14_data },
+ { MAX8998_LDO15, &goni_ldo15_data },
+ { MAX8998_LDO16, &goni_ldo16_data },
+ { MAX8998_LDO17, &goni_ldo17_data },
+ { MAX8998_BUCK1, &goni_buck1_data },
+ { MAX8998_BUCK2, &goni_buck2_data },
+ { MAX8998_BUCK3, &goni_buck3_data },
+ { MAX8998_BUCK4, &goni_buck4_data },
+};
+
+static struct max8998_platform_data goni_max8998_pdata = {
+ .num_regulators = ARRAY_SIZE(goni_regulators),
+ .regulators = goni_regulators,
+};
+#endif
+
+/* GPIO I2C PMIC */
+#define AP_I2C_GPIO_PMIC_BUS_4 4
+static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
+ .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
+ .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
+};
+
+static struct platform_device goni_i2c_gpio_pmic = {
+ .name = "i2c-gpio",
+ .id = AP_I2C_GPIO_PMIC_BUS_4,
+ .dev = {
+ .platform_data = &goni_i2c_gpio_pmic_data,
+ },
+};
+
+static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+ {
+ /* 0xCC when SRAD = 0 */
+ I2C_BOARD_INFO("max8998", 0xCC >> 1),
+ .platform_data = &goni_max8998_pdata,
+ },
+#endif
+};
+
+/* PMIC Power button */
+static struct gpio_keys_button goni_gpio_keys_table[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = S5PV210_GPH2(6),
+ .desc = "gpio-keys: KEY_POWER",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ },
+};
+
+static struct gpio_keys_platform_data goni_gpio_keys_data = {
+ .buttons = goni_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(goni_gpio_keys_table),
+};
+
+static struct platform_device goni_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &goni_gpio_keys_data,
+ },
+};
+
+static void __init goni_pmic_init(void)
+{
+ /* AP_PMIC_IRQ: EINT7 */
+ s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
+
+ /* nPower: EINT22 */
+ s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
+}
+
+/* MoviNAND */
+static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+};
+
+/* Wireless LAN */
+static struct s3c_sdhci_platdata goni_hsmmc1_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_EXTERNAL,
+ /* ext_cd_{init,cleanup} callbacks will be added later */
+};
+
+/* External Flash */
+#define GONI_EXT_FLASH_EN S5PV210_MP05(4)
+#define GONI_EXT_FLASH_CD S5PV210_GPH3(4)
+static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = GONI_EXT_FLASH_CD,
+ .ext_cd_gpio_invert = 1,
+};
+
+static void goni_setup_sdhci(void)
+{
+ gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN");
+ gpio_direction_output(GONI_EXT_FLASH_EN, 1);
+
+ s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
+ s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
+ s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
+};
+
static struct platform_device *goni_devices[] __initdata = {
+ &s3c_device_fb,
+ &s5pc110_device_onenand,
+ &goni_i2c_gpio_pmic,
+ &goni_device_gpiokeys,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
};
static void __init goni_map_io(void)
static void __init goni_machine_init(void)
{
+ /* PMIC */
+ goni_pmic_init();
+ i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
+ ARRAY_SIZE(i2c_gpio_pmic_devs));
+ /* SDHCI */
+ goni_setup_sdhci();
+
+ /* FB */
+ s3c_fb_set_platdata(&goni_lcd_pdata);
+
platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
}
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/i2c.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/ata.h>
+#include <plat/iic.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+#define SMDKC110_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+#define SMDKC110_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKC110_UCON_DEFAULT,
+ .ulcon = SMDKC110_ULCON_DEFAULT,
+ .ufcon = SMDKC110_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKC110_UCON_DEFAULT,
+ .ulcon = SMDKC110_ULCON_DEFAULT,
+ .ufcon = SMDKC110_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKC110_UCON_DEFAULT,
+ .ulcon = SMDKC110_ULCON_DEFAULT,
+ .ufcon = SMDKC110_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKC110_UCON_DEFAULT,
+ .ulcon = SMDKC110_ULCON_DEFAULT,
+ .ufcon = SMDKC110_UFCON_DEFAULT,
},
};
+static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = {
+ .setup_gpio = s5pv210_ide_setup_gpio,
+};
+
static struct platform_device *smdkc110_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
+ &s3c_device_cfcon,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_i2c2,
+ &s3c_device_rtc,
&s3c_device_wdt,
};
+static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
+ { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */
+};
+
+static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = {
+ /* To Be Updated */
+};
+
+static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = {
+ /* To Be Updated */
+};
+
static void __init smdkc110_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
static void __init smdkc110_machine_init(void)
{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_i2c1_set_platdata(NULL);
+ s3c_i2c2_set_platdata(NULL);
+ i2c_register_board_info(0, smdkc110_i2c_devs0,
+ ARRAY_SIZE(smdkc110_i2c_devs0));
+ i2c_register_board_info(1, smdkc110_i2c_devs1,
+ ARRAY_SIZE(smdkc110_i2c_devs1));
+ i2c_register_board_info(2, smdkc110_i2c_devs2,
+ ARRAY_SIZE(smdkc110_i2c_devs2));
+
+ s3c_ide_set_platdata(&smdkc110_ide_pdata);
+
platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
}
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <plat/cpu.h>
#include <plat/adc.h>
#include <plat/ts.h>
+#include <plat/ata.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+#define SMDKV210_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+#define SMDKV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKV210_UCON_DEFAULT,
+ .ulcon = SMDKV210_ULCON_DEFAULT,
+ .ufcon = SMDKV210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKV210_UCON_DEFAULT,
+ .ulcon = SMDKV210_ULCON_DEFAULT,
+ .ufcon = SMDKV210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKV210_UCON_DEFAULT,
+ .ulcon = SMDKV210_ULCON_DEFAULT,
+ .ufcon = SMDKV210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKV210_UCON_DEFAULT,
+ .ulcon = SMDKV210_ULCON_DEFAULT,
+ .ufcon = SMDKV210_UFCON_DEFAULT,
},
};
+static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = {
+ .setup_gpio = s5pv210_ide_setup_gpio,
+};
+
+static uint32_t smdkv210_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+ KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+ KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+ KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdkv210_keymap_data __initdata = {
+ .keymap = smdkv210_keymap,
+ .keymap_size = ARRAY_SIZE(smdkv210_keymap),
+};
+
+static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
+ .keymap_data = &smdkv210_keymap_data,
+ .rows = 8,
+ .cols = 8,
+};
+
static struct platform_device *smdkv210_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
&s3c_device_adc,
+ &s3c_device_cfcon,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_i2c2,
+ &samsung_device_keypad,
+ &s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
};
+static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
+ { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */
+};
+
+static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
+ /* To Be Updated */
+};
+
+static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
+ /* To Be Updated */
+};
+
static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
.delay = 10000,
.presc = 49,
static void __init smdkv210_machine_init(void)
{
+ samsung_keypad_set_platdata(&smdkv210_keypad_data);
s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+ s3c_i2c0_set_platdata(NULL);
+ s3c_i2c1_set_platdata(NULL);
+ s3c_i2c2_set_platdata(NULL);
+ i2c_register_board_info(0, smdkv210_i2c_devs0,
+ ARRAY_SIZE(smdkv210_i2c_devs0));
+ i2c_register_board_info(1, smdkv210_i2c_devs1,
+ ARRAY_SIZE(smdkv210_i2c_devs1));
+ i2c_register_board_info(2, smdkv210_i2c_devs2,
+ ARRAY_SIZE(smdkv210_i2c_devs2));
+
+ s3c_ide_set_platdata(&smdkv210_ide_pdata);
+
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fb.h>
+#include <linux/gpio.h>
#include <mach/regs-fb.h>
-#include <mach/gpio.h>
#include <mach/map.h>
#include <plat/fb.h>
#include <mach/regs-clock.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
-#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
-#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
-#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
--- /dev/null
+/* linux/arch/arm/mach-s5pv210/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV210 setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+
+void s5pv210_ide_setup_gpio(void)
+{
+ unsigned int gpio = 0;
+
+ for (gpio = S5PV210_GPJ0(0); gpio <= S5PV210_GPJ0(7); gpio++) {
+ /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST,
+ CF_DMACK */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = S5PV210_GPJ2(0); gpio <= S5PV210_GPJ2(7); gpio++) {
+ /*CF_Data[0 - 7] */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = S5PV210_GPJ3(0); gpio <= S5PV210_GPJ3(7); gpio++) {
+ /* CF_Data[8 - 15] */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = S5PV210_GPJ4(0); gpio <= S5PV210_GPJ4(3); gpio++) {
+ /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-s5pv210/setup-keypad.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+ unsigned int gpio, end;
+
+ /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
+ end = S5PV210_GPH3(rows);
+ for (gpio = S5PV210_GPH3(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
+ end = S5PV210_GPH2(cols);
+ for (gpio = S5PV210_GPH2(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+}
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
-#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
break;
}
- s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+ }
}
void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG1[0:1] pins to special-function 2 */
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
- s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+ }
}
void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG2[0:1] pins to special-function 2 */
break;
}
- s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+ }
+}
+
+void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPG3[0:2] pins to special-function 2 */
+ for (gpio = S5PV210_GPG3(0); gpio < S5PV210_GPG3(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ /* Data pin GPG3[3:6] to special-function 2 */
+ for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2));
+ }
}
char *s5pv210_hsmmc_clksrcs[4] = {
[0] = "hsmmc", /* HCLK */
- [1] = "hsmmc", /* HCLK */
+ /* [1] = "hsmmc", - duplicate HCLK entry */
[2] = "sclk_mmc", /* mmc_bus */
- /*[4] = reserved */
+ /* [3] = NULL, - reserved */
};
void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
--- /dev/null
+# arch/arm/mach-s5pv310/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PV310
+
+if ARCH_S5PV310
+
+config CPU_S5PV310
+ bool
+ select PLAT_S5P
+ help
+ Enable S5PV310 CPU support
+
+config S5PV310_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
+config S5PV310_SETUP_I2C2
+ bool
+ help
+ Common setup code for i2c bus 2.
+
+# machine support
+
+config MACH_SMDKV310
+ bool "SMDKV310"
+ select CPU_S5PV310
+ select ARCH_SPARSEMEM_ENABLE
+ help
+ Machine support for Samsung SMDKV310
+
+config MACH_UNIVERSAL_C210
+ bool "Mobile UNIVERSAL_C210 Board"
+ select CPU_S5PV310
+ select ARCH_SPARSEMEM_ENABLE
+ help
+ Machine support for Samsung Mobile Universal S5PC210 Reference
+ Board. S5PC210(MCP) is one of package option of S5PV310
+
+endif
--- /dev/null
+# arch/arm/mach-s5pv310/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for S5PV310 system
+
+obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o
+
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
+obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
+
+# device support
+
+obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o
--- /dev/null
+ zreladdr-y := 0x40008000
+params_phys-y := 0x40000100
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+static struct clk clk_sclk_hdmi27m = {
+ .name = "sclk_hdmi27m",
+ .id = -1,
+ .rate = 27000000,
+};
+
+/* Core list of CMU_CPU side */
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+};
+
+static struct clk *clkset_moutcore_list[] = {
+ [0] = &clk_mout_apll.clk,
+ [1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_moutcore = {
+ .sources = clkset_moutcore_list,
+ .nr_sources = ARRAY_SIZE(clkset_moutcore_list),
+};
+
+static struct clksrc_clk clk_moutcore = {
+ .clk = {
+ .name = "moutcore",
+ .id = -1,
+ },
+ .sources = &clkset_moutcore,
+ .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk clk_coreclk = {
+ .clk = {
+ .name = "core_clk",
+ .id = -1,
+ .parent = &clk_moutcore.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_armclk = {
+ .clk = {
+ .name = "armclk",
+ .id = -1,
+ .parent = &clk_coreclk.clk,
+ },
+};
+
+static struct clksrc_clk clk_aclk_corem0 = {
+ .clk = {
+ .name = "aclk_corem0",
+ .id = -1,
+ .parent = &clk_coreclk.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_cores = {
+ .clk = {
+ .name = "aclk_cores",
+ .id = -1,
+ .parent = &clk_coreclk.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_corem1 = {
+ .clk = {
+ .name = "aclk_corem1",
+ .id = -1,
+ .parent = &clk_coreclk.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_periphclk = {
+ .clk = {
+ .name = "periphclk",
+ .id = -1,
+ .parent = &clk_coreclk.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_atclk = {
+ .clk = {
+ .name = "atclk",
+ .id = -1,
+ .parent = &clk_moutcore.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_pclk_dbg = {
+ .clk = {
+ .name = "pclk_dbg",
+ .id = -1,
+ .parent = &clk_atclk.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 20, .size = 3 },
+};
+
+/* Core list of CMU_CORE side */
+
+static struct clk *clkset_corebus_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_mout_apll.clk,
+};
+
+static struct clksrc_sources clkset_mout_corebus = {
+ .sources = clkset_corebus_list,
+ .nr_sources = ARRAY_SIZE(clkset_corebus_list),
+};
+
+static struct clksrc_clk clk_mout_corebus = {
+ .clk = {
+ .name = "mout_corebus",
+ .id = -1,
+ },
+ .sources = &clkset_mout_corebus,
+ .reg_src = { .reg = S5P_CLKSRC_CORE, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_dmc = {
+ .clk = {
+ .name = "sclk_dmc",
+ .id = -1,
+ .parent = &clk_mout_corebus.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_cored = {
+ .clk = {
+ .name = "aclk_cored",
+ .id = -1,
+ .parent = &clk_sclk_dmc.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_corep = {
+ .clk = {
+ .name = "aclk_corep",
+ .id = -1,
+ .parent = &clk_aclk_cored.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_acp = {
+ .clk = {
+ .name = "aclk_acp",
+ .id = -1,
+ .parent = &clk_mout_corebus.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_pclk_acp = {
+ .clk = {
+ .name = "pclk_acp",
+ .id = -1,
+ .parent = &clk_aclk_acp.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 4, .size = 3 },
+};
+
+/* Core list of CMU_TOP side */
+
+static struct clk *clkset_aclk_top_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_mout_apll.clk,
+};
+
+static struct clksrc_sources clkset_aclk_200 = {
+ .sources = clkset_aclk_top_list,
+ .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
+};
+
+static struct clksrc_clk clk_aclk_200 = {
+ .clk = {
+ .name = "aclk_200",
+ .id = -1,
+ },
+ .sources = &clkset_aclk_200,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_sources clkset_aclk_100 = {
+ .sources = clkset_aclk_top_list,
+ .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
+};
+
+static struct clksrc_clk clk_aclk_100 = {
+ .clk = {
+ .name = "aclk_100",
+ .id = -1,
+ },
+ .sources = &clkset_aclk_100,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_sources clkset_aclk_160 = {
+ .sources = clkset_aclk_top_list,
+ .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
+};
+
+static struct clksrc_clk clk_aclk_160 = {
+ .clk = {
+ .name = "aclk_160",
+ .id = -1,
+ },
+ .sources = &clkset_aclk_160,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_sources clkset_aclk_133 = {
+ .sources = clkset_aclk_top_list,
+ .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
+};
+
+static struct clksrc_clk clk_aclk_133 = {
+ .clk = {
+ .name = "aclk_133",
+ .id = -1,
+ },
+ .sources = &clkset_aclk_133,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 },
+};
+
+static struct clk *clkset_vpllsrc_list[] = {
+ [0] = &clk_fin_vpll,
+ [1] = &clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources clkset_vpllsrc = {
+ .sources = clkset_vpllsrc_list,
+ .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk clk_vpllsrc = {
+ .clk = {
+ .name = "vpll_src",
+ .id = -1,
+ },
+ .sources = &clkset_vpllsrc,
+ .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_vpll_list[] = {
+ [0] = &clk_vpllsrc.clk,
+ [1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources clkset_sclk_vpll = {
+ .sources = clkset_sclk_vpll_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk clk_sclk_vpll = {
+ .clk = {
+ .name = "sclk_vpll",
+ .id = -1,
+ },
+ .sources = &clkset_sclk_vpll,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 },
+};
+
+static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1<<24),
+ }
+};
+
+static struct clk init_clocks[] = {
+ /* Nothing here yet */
+};
+
+static struct clk *clkset_group_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &clk_xusbxti,
+ [2] = &clk_sclk_hdmi27m,
+ [6] = &clk_mout_mpll.clk,
+ [7] = &clk_mout_epll.clk,
+ [8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_group = {
+ .sources = clkset_group_list,
+ .nr_sources = ARRAY_SIZE(clkset_group_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "uclk1",
+ .id = 0,
+ .ctrlbit = (1 << 0),
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = 1,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 1),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = 2,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 2),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = 3,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 3),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_pwm",
+ .id = -1,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 },
+ },
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+ &clk_moutcore,
+ &clk_coreclk,
+ &clk_armclk,
+ &clk_aclk_corem0,
+ &clk_aclk_cores,
+ &clk_aclk_corem1,
+ &clk_periphclk,
+ &clk_atclk,
+ &clk_pclk_dbg,
+ &clk_mout_corebus,
+ &clk_sclk_dmc,
+ &clk_aclk_cored,
+ &clk_aclk_corep,
+ &clk_aclk_acp,
+ &clk_pclk_acp,
+ &clk_vpllsrc,
+ &clk_sclk_vpll,
+ &clk_aclk_200,
+ &clk_aclk_100,
+ &clk_aclk_160,
+ &clk_aclk_133,
+};
+
+void __init_or_cpufreq s5pv310_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned long vpll;
+ unsigned long vpllsrc;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long aclk_corem0;
+ unsigned long aclk_cores;
+ unsigned long aclk_corem1;
+ unsigned long periphclk;
+ unsigned long sclk_dmc;
+ unsigned long aclk_cored;
+ unsigned long aclk_corep;
+ unsigned long aclk_acp;
+ unsigned long pclk_acp;
+ unsigned int ptr;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
+ epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1), pll_4500);
+
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1), pll_4502);
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_vpll.rate = vpll;
+
+ printk(KERN_INFO "S5PV310: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
+ apll, mpll, epll, vpll);
+
+ armclk = clk_get_rate(&clk_armclk.clk);
+ aclk_corem0 = clk_get_rate(&clk_aclk_corem0.clk);
+ aclk_cores = clk_get_rate(&clk_aclk_cores.clk);
+ aclk_corem1 = clk_get_rate(&clk_aclk_corem1.clk);
+ periphclk = clk_get_rate(&clk_periphclk.clk);
+ sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk);
+ aclk_cored = clk_get_rate(&clk_aclk_cored.clk);
+ aclk_corep = clk_get_rate(&clk_aclk_corep.clk);
+ aclk_acp = clk_get_rate(&clk_aclk_acp.clk);
+ pclk_acp = clk_get_rate(&clk_pclk_acp.clk);
+
+ printk(KERN_INFO "S5PV310: ARMCLK=%ld, COREM0=%ld, CORES=%ld\n"
+ "COREM1=%ld, PERI=%ld, DMC=%ld, CORED=%ld\n"
+ "COREP=%ld, ACLK_ACP=%ld, PCLK_ACP=%ld",
+ armclk, aclk_corem0, aclk_cores, aclk_corem1,
+ periphclk, sclk_dmc, aclk_cored, aclk_corep,
+ aclk_acp, pclk_acp);
+
+ clk_f.rate = armclk;
+ clk_h.rate = sclk_dmc;
+ clk_p.rate = periphclk;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+ /* Nothing here yet */
+};
+
+void __init s5pv310_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+ if (ret > 0)
+ printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+}
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sched.h>
+#include <linux/sysdev.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/s5pv310.h>
+
+#include <mach/regs-irq.h>
+
+void __iomem *gic_cpu_base_addr;
+
+extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
+ unsigned int irq_start);
+extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
+
+/* Initial IO mappings */
+static struct map_desc s5pv310_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
+ .pfn = __phys_to_pfn(S5PV310_PA_COREPERI),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
+ .pfn = __phys_to_pfn(S5PV310_PA_COMBINER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_L2CC,
+ .pfn = __phys_to_pfn(S5PV310_PA_L2CC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void s5pv310_idle(void)
+{
+ if (!need_resched())
+ cpu_do_idle();
+
+ local_irq_enable();
+}
+
+/* s5pv310_map_io
+ *
+ * register the standard cpu IO areas
+*/
+void __init s5pv310_map_io(void)
+{
+ iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc));
+}
+
+void __init s5pv310_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5pv310_register_clocks();
+ s5pv310_setup_clocks();
+}
+
+void __init s5pv310_init_irq(void)
+{
+ int irq;
+
+ gic_cpu_base_addr = S5P_VA_GIC_CPU;
+ gic_dist_init(0, S5P_VA_GIC_DIST, IRQ_LOCALTIMER);
+ gic_cpu_init(0, S5P_VA_GIC_CPU);
+
+ for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+ combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+ COMBINER_IRQ(irq, 0));
+ combiner_cascade_irq(irq, IRQ_SPI(irq));
+ }
+
+ /* The parameters of s5p_init_irq() are for VIC init.
+ * Theses parameters should be NULL and 0 because S5PV310
+ * uses GIC instead of VIC.
+ */
+ s5p_init_irq(NULL, 0);
+}
+
+struct sysdev_class s5pv310_sysclass = {
+ .name = "s5pv310-core",
+};
+
+static struct sys_device s5pv310_sysdev = {
+ .cls = &s5pv310_sysclass,
+};
+
+static int __init s5pv310_core_init(void)
+{
+ return sysdev_class_register(&s5pv310_sysclass);
+}
+
+core_initcall(s5pv310_core_init);
+
+int __init s5pv310_init(void)
+{
+ printk(KERN_INFO "S5PV310: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = s5pv310_idle;
+
+ return sysdev_register(&s5pv310_sysdev);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-s5pv310/headsmp.S
+ *
+ * Cloned from linux/arch/arm/mach-realview/headsmp.S
+ *
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __INIT
+
+/*
+ * s5pv310 specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(s5pv310_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ add r6, r6, r4
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
+1: .long .
+ .long pen_release
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rx, tmp
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S3C_PA_UART
+ ldrne \rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rx, \rx, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+#include <plat/debug-macro.S>
--- /dev/null
+/* arch/arm/mach-s5pv310/include/mach/entry-macro.S
+ *
+ * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for S5PV310 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =gic_cpu_base_addr
+ ldr \base, [\base]
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an interrupt if it's
+ * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
+ *
+ * A simple read from the controller will tell us the number of the highest
+ * priority enabled interrupt. We then just need to check whether it is in the
+ * valid range for an IRQ (30-1020 inclusive).
+ */
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+ ldr \tmp, =1021
+
+ bic \irqnr, \irqstat, #0x1c00
+
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+ addne \irqnr, \irqnr, #32
+
+ .endm
+
+ /* We assume that irqstat (the raw value of the IRQ acknowledge
+ * register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of interrupt on the
+ * controller, since this requires the original irqstat value which
+ * we won't easily be able to recreate later.
+ */
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* As above, this assumes that irqstat and base are preserved.. */
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ mov \tmp, #0
+ cmp \irqnr, #29
+ moveq \tmp, #1
+ streq \irqstat, [\base, #GIC_CPU_EOI]
+ cmp \tmp, #0
+ .endm
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/* Practically, GPIO banks upto GPZ are the configurable gpio banks */
+
+/* GPIO bank sizes */
+#define S5PV310_GPIO_A0_NR (8)
+#define S5PV310_GPIO_A1_NR (6)
+#define S5PV310_GPIO_B_NR (8)
+#define S5PV310_GPIO_C0_NR (5)
+#define S5PV310_GPIO_C1_NR (5)
+#define S5PV310_GPIO_D0_NR (4)
+#define S5PV310_GPIO_D1_NR (4)
+#define S5PV310_GPIO_E0_NR (5)
+#define S5PV310_GPIO_E1_NR (8)
+#define S5PV310_GPIO_E2_NR (6)
+#define S5PV310_GPIO_E3_NR (8)
+#define S5PV310_GPIO_E4_NR (8)
+#define S5PV310_GPIO_F0_NR (8)
+#define S5PV310_GPIO_F1_NR (8)
+#define S5PV310_GPIO_F2_NR (8)
+#define S5PV310_GPIO_F3_NR (6)
+#define S5PV310_GPIO_J0_NR (8)
+#define S5PV310_GPIO_J1_NR (5)
+#define S5PV310_GPIO_K0_NR (7)
+#define S5PV310_GPIO_K1_NR (7)
+#define S5PV310_GPIO_K2_NR (7)
+#define S5PV310_GPIO_K3_NR (7)
+#define S5PV310_GPIO_L0_NR (8)
+#define S5PV310_GPIO_L1_NR (3)
+#define S5PV310_GPIO_L2_NR (8)
+#define S5PV310_GPIO_X0_NR (8)
+#define S5PV310_GPIO_X1_NR (8)
+#define S5PV310_GPIO_X2_NR (8)
+#define S5PV310_GPIO_X3_NR (8)
+#define S5PV310_GPIO_Z_NR (7)
+
+/* GPIO bank numbers */
+
+#define S5PV310_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+ S5PV310_GPIO_A0_START = 0,
+ S5PV310_GPIO_A1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A0),
+ S5PV310_GPIO_B_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A1),
+ S5PV310_GPIO_C0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_B),
+ S5PV310_GPIO_C1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C0),
+ S5PV310_GPIO_D0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C1),
+ S5PV310_GPIO_D1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D0),
+ S5PV310_GPIO_E0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D1),
+ S5PV310_GPIO_E1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E0),
+ S5PV310_GPIO_E2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E1),
+ S5PV310_GPIO_E3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E2),
+ S5PV310_GPIO_E4_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E3),
+ S5PV310_GPIO_F0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E4),
+ S5PV310_GPIO_F1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F0),
+ S5PV310_GPIO_F2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F1),
+ S5PV310_GPIO_F3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F2),
+ S5PV310_GPIO_J0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F3),
+ S5PV310_GPIO_J1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J0),
+ S5PV310_GPIO_K0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J1),
+ S5PV310_GPIO_K1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K0),
+ S5PV310_GPIO_K2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K1),
+ S5PV310_GPIO_K3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K2),
+ S5PV310_GPIO_L0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K3),
+ S5PV310_GPIO_L1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L0),
+ S5PV310_GPIO_L2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L1),
+ S5PV310_GPIO_X0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L2),
+ S5PV310_GPIO_X1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X0),
+ S5PV310_GPIO_X2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X1),
+ S5PV310_GPIO_X3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X2),
+ S5PV310_GPIO_Z_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X3),
+};
+
+/* S5PV310 GPIO number definitions */
+#define S5PV310_GPA0(_nr) (S5PV310_GPIO_A0_START + (_nr))
+#define S5PV310_GPA1(_nr) (S5PV310_GPIO_A1_START + (_nr))
+#define S5PV310_GPB(_nr) (S5PV310_GPIO_B_START + (_nr))
+#define S5PV310_GPC0(_nr) (S5PV310_GPIO_C0_START + (_nr))
+#define S5PV310_GPC1(_nr) (S5PV310_GPIO_C1_START + (_nr))
+#define S5PV310_GPD0(_nr) (S5PV310_GPIO_D0_START + (_nr))
+#define S5PV310_GPD1(_nr) (S5PV310_GPIO_D1_START + (_nr))
+#define S5PV310_GPE0(_nr) (S5PV310_GPIO_E0_START + (_nr))
+#define S5PV310_GPE1(_nr) (S5PV310_GPIO_E1_START + (_nr))
+#define S5PV310_GPE2(_nr) (S5PV310_GPIO_E2_START + (_nr))
+#define S5PV310_GPE3(_nr) (S5PV310_GPIO_E3_START + (_nr))
+#define S5PV310_GPE4(_nr) (S5PV310_GPIO_E4_START + (_nr))
+#define S5PV310_GPF0(_nr) (S5PV310_GPIO_F0_START + (_nr))
+#define S5PV310_GPF1(_nr) (S5PV310_GPIO_F1_START + (_nr))
+#define S5PV310_GPF2(_nr) (S5PV310_GPIO_F2_START + (_nr))
+#define S5PV310_GPF3(_nr) (S5PV310_GPIO_F3_START + (_nr))
+#define S5PV310_GPJ0(_nr) (S5PV310_GPIO_J0_START + (_nr))
+#define S5PV310_GPJ1(_nr) (S5PV310_GPIO_J1_START + (_nr))
+#define S5PV310_GPK0(_nr) (S5PV310_GPIO_K0_START + (_nr))
+#define S5PV310_GPK1(_nr) (S5PV310_GPIO_K1_START + (_nr))
+#define S5PV310_GPK2(_nr) (S5PV310_GPIO_K2_START + (_nr))
+#define S5PV310_GPK3(_nr) (S5PV310_GPIO_K3_START + (_nr))
+#define S5PV310_GPL0(_nr) (S5PV310_GPIO_L0_START + (_nr))
+#define S5PV310_GPL1(_nr) (S5PV310_GPIO_L1_START + (_nr))
+#define S5PV310_GPL2(_nr) (S5PV310_GPIO_L2_START + (_nr))
+#define S5PV310_GPX0(_nr) (S5PV310_GPIO_X0_START + (_nr))
+#define S5PV310_GPX1(_nr) (S5PV310_GPIO_X1_START + (_nr))
+#define S5PV310_GPX2(_nr) (S5PV310_GPIO_X2_START + (_nr))
+#define S5PV310_GPX3(_nr) (S5PV310_GPIO_X3_START + (_nr))
+#define S5PV310_GPZ(_nr) (S5PV310_GPIO_Z_START + (_nr))
+
+/* the end of the S5PV310 specific gpios */
+#define S5PV310_GPIO_END (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + 1)
+#define S3C_GPIO_END S5PV310_GPIO_END
+
+/* define the number of gpios we need to the one after the GPZ() range */
+#define ARCH_NR_GPIOS (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + \
+ CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/io.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Default IO routines for S5PV310
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H __FILE__
+
+/* No current ISA/PCI bus support. */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* Private Peripheral Interrupt */
+#define IRQ_PPI(x) S5P_IRQ(x+16)
+
+#define IRQ_LOCALTIMER IRQ_PPI(13)
+
+/* Shared Peripheral Interrupt */
+#define IRQ_SPI(x) S5P_IRQ(x+32)
+
+#define IRQ_EINT0 IRQ_SPI(40)
+#define IRQ_EINT1 IRQ_SPI(41)
+#define IRQ_EINT2 IRQ_SPI(42)
+#define IRQ_EINT3 IRQ_SPI(43)
+#define IRQ_USB_HSOTG IRQ_SPI(44)
+#define IRQ_USB_HOST IRQ_SPI(45)
+#define IRQ_MODEM_IF IRQ_SPI(46)
+#define IRQ_ROTATOR IRQ_SPI(47)
+#define IRQ_JPEG IRQ_SPI(48)
+#define IRQ_2D IRQ_SPI(49)
+#define IRQ_PCIE IRQ_SPI(50)
+#define IRQ_SYSTEM_TIMER IRQ_SPI(51)
+#define IRQ_MFC IRQ_SPI(52)
+#define IRQ_WTD IRQ_SPI(53)
+#define IRQ_AUDIO_SS IRQ_SPI(54)
+#define IRQ_AC97 IRQ_SPI(55)
+#define IRQ_SPDIF IRQ_SPI(56)
+#define IRQ_KEYPAD IRQ_SPI(57)
+#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(58)
+#define IRQ_SLIMBUS IRQ_SPI(59)
+#define IRQ_PMU IRQ_SPI(60)
+#define IRQ_TSI IRQ_SPI(61)
+#define IRQ_SATA IRQ_SPI(62)
+#define IRQ_GPS IRQ_SPI(63)
+
+#define MAX_IRQ_IN_COMBINER 8
+#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64))
+#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
+
+#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0)
+#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1)
+#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2)
+#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3)
+#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4)
+
+#define IRQ_UART0 COMBINER_IRQ(26, 0)
+#define IRQ_UART1 COMBINER_IRQ(26, 1)
+#define IRQ_UART2 COMBINER_IRQ(26, 2)
+#define IRQ_UART3 COMBINER_IRQ(26, 3)
+#define IRQ_UART4 COMBINER_IRQ(26, 4)
+
+#define IRQ_IIC COMBINER_IRQ(27, 0)
+
+/* Set the default NR_IRQS */
+#define NR_IRQS COMBINER_IRQ(MAX_COMBINER_NR, 0)
+
+#define MAX_COMBINER_NR 39
+
+#endif /* ASM_ARCH_IRQS_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+/*
+ * S5PV310 UART offset is 0x10000 but the older S5P SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET (0x10000)
+
+#include <plat/map-s5p.h>
+
+#define S5PV310_PA_CHIPID (0x10000000)
+#define S5P_PA_CHIPID S5PV310_PA_CHIPID
+
+#define S5PV310_PA_SYSCON (0x10020000)
+#define S5P_PA_SYSCON S5PV310_PA_SYSCON
+
+#define S5PV310_PA_WATCHDOG (0x10060000)
+
+#define S5PV310_PA_COMBINER (0x10448000)
+
+#define S5PV310_PA_COREPERI (0x10500000)
+#define S5PV310_PA_GIC_CPU (0x10500100)
+#define S5PV310_PA_TWD (0x10500600)
+#define S5PV310_PA_GIC_DIST (0x10501000)
+#define S5PV310_PA_L2CC (0x10502000)
+
+#define S5PV310_PA_GPIO (0x11000000)
+#define S5P_PA_GPIO S5PV310_PA_GPIO
+
+#define S5PV310_PA_UART (0x13800000)
+
+#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
+#define S5P_PA_UART4 S5P_PA_UART(4)
+
+#define S5P_SZ_UART SZ_256
+
+#define S5PV310_PA_IIC0 (0x13860000)
+
+#define S5PV310_PA_TIMER (0x139D0000)
+#define S5P_PA_TIMER S5PV310_PA_TIMER
+
+#define S5PV310_PA_SDRAM (0x40000000)
+#define S5P_PA_SDRAM S5PV310_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART S5PV310_PA_UART
+#define S3C_PA_IIC S5PV310_PA_IIC0
+#define S3C_PA_WDT S5PV310_PA_WATCHDOG
+
+#endif /* __ASM_ARCH_MAP_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H __FILE__
+
+#define PHYS_OFFSET UL(0x40000000)
+
+/* Maximum of 256MiB in one bank */
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 28
+
+#endif /* __ASM_ARCH_MEMORY_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
+ *
+ * S5PV310 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+ return tcfg == S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+ return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+ return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S5P_INFORM0 S5P_CLKREG(0x800)
+
+#define S5P_EPLL_CON0 S5P_CLKREG(0x1C110)
+#define S5P_EPLL_CON1 S5P_CLKREG(0x1C114)
+#define S5P_VPLL_CON0 S5P_CLKREG(0x1C120)
+#define S5P_VPLL_CON1 S5P_CLKREG(0x1C124)
+
+#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x1C210)
+#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x1C214)
+
+#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x1C250)
+
+#define S5P_CLKDIV_TOP S5P_CLKREG(0x1C510)
+
+#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x1C550)
+#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x1C554)
+#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x1C558)
+#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x1C55C)
+#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x1C560)
+#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x1C564)
+
+#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x1C950)
+
+#define S5P_CLKSRC_CORE S5P_CLKREG(0x20200)
+
+#define S5P_CLKDIV_CORE0 S5P_CLKREG(0x20500)
+
+#define S5P_APLL_LOCK S5P_CLKREG(0x24000)
+#define S5P_MPLL_LOCK S5P_CLKREG(0x24004)
+#define S5P_APLL_CON0 S5P_CLKREG(0x24100)
+#define S5P_APLL_CON1 S5P_CLKREG(0x24104)
+#define S5P_MPLL_CON0 S5P_CLKREG(0x24108)
+#define S5P_MPLL_CON1 S5P_CLKREG(0x2410C)
+
+#define S5P_CLKSRC_CPU S5P_CLKREG(0x24200)
+#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x24400)
+
+#define S5P_CLKDIV_CPU S5P_CLKREG(0x24500)
+#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x24600)
+
+#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x24800)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/gic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/smp.h
+ *
+ * Cloned from arch/arm/mach-realview/include/mach/smp.h
+*/
+
+#ifndef ASM_ARCH_SMP_H
+#define ASM_ARCH_SMP_H __FILE__
+
+#include <asm/hardware/gic.h>
+
+extern void __iomem *gic_cpu_base_addr;
+
+#define hard_smp_processor_id() \
+ ({ \
+ unsigned int cpunum; \
+ __asm__("mrc p15, 0, %0, c0, c0, 5" \
+ : "=r" (cpunum)); \
+ cpunum &= 0x03; \
+ })
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+ gic_raise_softirq(mask, 1);
+}
+
+#endif
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+#include <plat/system-reset.h>
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+#endif /* __ASM_ARCH_SYSTEM_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/timex.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright (c) 2003-2010 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/timex.h
+ *
+ * S5PV310 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H __FILE__
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H __FILE__
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+
+ /*
+ * For preventing FIFO overrun or infinite loop of UART console,
+ * fifo_max should be the minimum fifo size of all of the UART channels
+ */
+ fifo_mask = S5PV210_UFSTAT_TXMASK;
+ fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
+}
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S5PV310 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H __FILE__
+
+#define VMALLOC_END (0xF0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5pv310_serial_clocks[] = {
+ [0] = {
+ .name = "uclk1",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+void __init s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->has_fracval = 1;
+ tcfg->clocks = s5pv310_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(s5pv310_serial_clocks);
+ }
+ }
+
+ s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/irq-combiner.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/common/gic.c
+ *
+ * IRQ COMBINER support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+#define COMBINER_ENABLE_SET 0x0
+#define COMBINER_ENABLE_CLEAR 0x4
+#define COMBINER_INT_STATUS 0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+ unsigned int irq_offset;
+ void __iomem *base;
+};
+
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(unsigned int irq)
+{
+ struct combiner_chip_data *combiner_data = get_irq_chip_data(irq);
+ return combiner_data->base;
+}
+
+static void combiner_mask_irq(unsigned int irq)
+{
+ u32 mask = 1 << (irq % 32);
+
+ __raw_writel(mask, combiner_base(irq) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(unsigned int irq)
+{
+ u32 mask = 1 << (irq % 32);
+
+ __raw_writel(mask, combiner_base(irq) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct combiner_chip_data *chip_data = get_irq_data(irq);
+ struct irq_chip *chip = get_irq_chip(irq);
+ unsigned int cascade_irq, combiner_irq;
+ unsigned long status;
+
+ /* primary controller ack'ing */
+ chip->ack(irq);
+
+ spin_lock(&irq_controller_lock);
+ status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+ spin_unlock(&irq_controller_lock);
+
+ if (status == 0)
+ goto out;
+
+ for (combiner_irq = 0; combiner_irq < 32; combiner_irq++) {
+ if (status & 0x1)
+ break;
+ status >>= 1;
+ }
+
+ cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+ if (unlikely(cascade_irq >= NR_IRQS))
+ do_bad_IRQ(cascade_irq, desc);
+ else
+ generic_handle_irq(cascade_irq);
+
+ out:
+ /* primary controller unmasking */
+ chip->unmask(irq);
+}
+
+static struct irq_chip combiner_chip = {
+ .name = "COMBINER",
+ .mask = combiner_mask_irq,
+ .unmask = combiner_unmask_irq,
+};
+
+void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+ if (combiner_nr >= MAX_COMBINER_NR)
+ BUG();
+ if (set_irq_data(irq, &combiner_data[combiner_nr]) != 0)
+ BUG();
+ set_irq_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
+ unsigned int irq_start)
+{
+ unsigned int i;
+
+ if (combiner_nr >= MAX_COMBINER_NR)
+ BUG();
+
+ combiner_data[combiner_nr].base = base;
+ combiner_data[combiner_nr].irq_offset = irq_start;
+
+ /* Disable all interrupts */
+
+ __raw_writel(0xffffffff, base + COMBINER_ENABLE_CLEAR);
+
+ /* Setup the Linux IRQ subsystem */
+
+ for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+ + MAX_IRQ_IN_COMBINER; i++) {
+ set_irq_chip(i, &combiner_chip);
+ set_irq_chip_data(i, &combiner_data[combiner_nr]);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+}
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/localtimer.c
+ *
+ * Cloned from linux/arch/arm/mach-realview/localtimer.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clockchips.h>
+
+#include <asm/irq.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ evt->irq = IRQ_LOCALTIMER;
+ twd_timer_setup(evt);
+}
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/mach-smdkv310.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv310.h>
+#include <plat/cpu.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDKV310_UCON_DEFAULT,
+ .ulcon = SMDKV310_ULCON_DEFAULT,
+ .ufcon = SMDKV310_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDKV310_UCON_DEFAULT,
+ .ulcon = SMDKV310_ULCON_DEFAULT,
+ .ufcon = SMDKV310_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDKV310_UCON_DEFAULT,
+ .ulcon = SMDKV310_ULCON_DEFAULT,
+ .ufcon = SMDKV310_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDKV310_UCON_DEFAULT,
+ .ulcon = SMDKV310_ULCON_DEFAULT,
+ .ufcon = SMDKV310_UFCON_DEFAULT,
+ },
+};
+
+static void __init smdkv310_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
+}
+
+static void __init smdkv310_machine_init(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+ l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff);
+#endif
+}
+
+MACHINE_START(SMDKV310, "SMDKV310")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv310_init_irq,
+ .map_io = smdkv310_map_io,
+ .init_machine = smdkv310_machine_init,
+ .timer = &s5pv310_timer,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/mach-universal_c210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv310.h>
+#include <plat/cpu.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG256 | \
+ S5PV210_UFCON_RXTRIG256)
+
+static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .ucon = UNIVERSAL_UCON_DEFAULT,
+ .ulcon = UNIVERSAL_ULCON_DEFAULT,
+ .ufcon = UNIVERSAL_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .ucon = UNIVERSAL_UCON_DEFAULT,
+ .ulcon = UNIVERSAL_ULCON_DEFAULT,
+ .ufcon = UNIVERSAL_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .ucon = UNIVERSAL_UCON_DEFAULT,
+ .ulcon = UNIVERSAL_ULCON_DEFAULT,
+ .ufcon = UNIVERSAL_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .ucon = UNIVERSAL_UCON_DEFAULT,
+ .ulcon = UNIVERSAL_ULCON_DEFAULT,
+ .ufcon = UNIVERSAL_UFCON_DEFAULT,
+ },
+};
+
+static void __init universal_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
+}
+
+static void __init universal_machine_init(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+ l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff);
+#endif
+}
+
+MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
+ /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv310_init_irq,
+ .map_io = universal_map_io,
+ .init_machine = universal_machine_init,
+ .timer = &s5pv310_timer,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/platsmp.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <asm/unified.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+extern void s5pv310_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+
+volatile int __cpuinitdata pen_release = -1;
+
+static void __iomem *scu_base_addr(void)
+{
+ return (void __iomem *)(S5P_VA_SCU);
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ trace_hardirqs_off();
+
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_cpu_init(0, gic_cpu_base_addr);
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ pen_release = -1;
+ smp_wmb();
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * Set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ *
+ * Note that "pen_release" is the hardware CPU ID, whereas
+ * "cpu" is Linux's internal ID.
+ */
+ pen_release = cpu;
+ __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+ outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+
+ /*
+ * Send the secondary CPU a soft interrupt, thereby causing
+ * the boot monitor to read the system wide flags register,
+ * and branch to the address found there.
+ */
+ smp_cross_call(cpumask_of(cpu));
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ smp_rmb();
+ if (pen_release == -1)
+ break;
+
+ udelay(10);
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+
+void __init smp_init_cpus(void)
+{
+ void __iomem *scu_base = scu_base_addr();
+ unsigned int i, ncores;
+
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+ /* sanity check */
+ if (ncores == 0) {
+ printk(KERN_ERR
+ "S5PV310: strange CM count of 0? Default to 1\n");
+
+ ncores = 1;
+ }
+
+ if (ncores > NR_CPUS) {
+ printk(KERN_WARNING
+ "S5PV310: no. of cores (%d) greater than configured "
+ "maximum of %d - clipping\n",
+ ncores, NR_CPUS);
+ ncores = NR_CPUS;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned int ncores = num_possible_cpus();
+ unsigned int cpu = smp_processor_id();
+ int i;
+
+ smp_store_cpu_info(cpu);
+
+ /* are we trying to boot more cores than exist? */
+ if (max_cpus > ncores)
+ max_cpus = ncores;
+
+ /*
+ * Initialise the present map, which describes the set of CPUs
+ * actually populated at the present time.
+ */
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+
+ /*
+ * Initialise the SCU if there are more than one CPU and let
+ * them know where to start.
+ */
+ if (max_cpus > 1) {
+ /*
+ * Enable the local timer or broadcast device for the
+ * boot CPU, but only if we have more than one CPU.
+ */
+ percpu_timer_setup();
+
+ scu_enable(scu_base_addr());
+
+ /*
+ * Write the address of secondary startup into the
+ * system-wide flags register. The boot monitor waits
+ * until it receives a soft interrupt, and then the
+ * secondary CPU branches to this address.
+ */
+ __raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_INFORM0);
+ }
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c0.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PV310_GPD1(0), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPD1(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV310_GPD1(1), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPD1(1), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c1.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C1 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PV310_GPD1(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPD1(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV310_GPD1(3), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPD1(3), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c2.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C2 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c2_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PV310_GPA0(6), S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(S5PV310_GPA0(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV310_GPA0(7), S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(S5PV310_GPA0(7), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/time.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV310 (and compatible) HRT support
+ * PWM 2/4 is used for this feature
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+
+#include <asm/smp_twd.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <asm/mach/time.h>
+
+static unsigned long clock_count_per_tick;
+
+static struct clk *tin2;
+static struct clk *tin4;
+static struct clk *tdiv2;
+static struct clk *tdiv4;
+static struct clk *timerclk;
+
+static void s5pv310_pwm_stop(unsigned int pwm_id)
+{
+ unsigned long tcon;
+
+ tcon = __raw_readl(S3C2410_TCON);
+
+ switch (pwm_id) {
+ case 2:
+ tcon &= ~S3C2410_TCON_T2START;
+ break;
+ case 4:
+ tcon &= ~S3C2410_TCON_T4START;
+ break;
+ default:
+ break;
+ }
+ __raw_writel(tcon, S3C2410_TCON);
+}
+
+static void s5pv310_pwm_init(unsigned int pwm_id, unsigned long tcnt)
+{
+ unsigned long tcon;
+
+ tcon = __raw_readl(S3C2410_TCON);
+
+ /* timers reload after counting zero, so reduce the count by 1 */
+ tcnt--;
+
+ /* ensure timer is stopped... */
+ switch (pwm_id) {
+ case 2:
+ tcon &= ~(0xf<<12);
+ tcon |= S3C2410_TCON_T2MANUALUPD;
+
+ __raw_writel(tcnt, S3C2410_TCNTB(2));
+ __raw_writel(tcnt, S3C2410_TCMPB(2));
+ __raw_writel(tcon, S3C2410_TCON);
+
+ break;
+ case 4:
+ tcon &= ~(7<<20);
+ tcon |= S3C2410_TCON_T4MANUALUPD;
+
+ __raw_writel(tcnt, S3C2410_TCNTB(4));
+ __raw_writel(tcnt, S3C2410_TCMPB(4));
+ __raw_writel(tcon, S3C2410_TCON);
+
+ break;
+ default:
+ break;
+ }
+}
+
+static inline void s5pv310_pwm_start(unsigned int pwm_id, bool periodic)
+{
+ unsigned long tcon;
+
+ tcon = __raw_readl(S3C2410_TCON);
+
+ switch (pwm_id) {
+ case 2:
+ tcon |= S3C2410_TCON_T2START;
+ tcon &= ~S3C2410_TCON_T2MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T2RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T2RELOAD;
+ break;
+ case 4:
+ tcon |= S3C2410_TCON_T4START;
+ tcon &= ~S3C2410_TCON_T4MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T4RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T4RELOAD;
+ break;
+ default:
+ break;
+ }
+ __raw_writel(tcon, S3C2410_TCON);
+}
+
+static int s5pv310_pwm_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ s5pv310_pwm_init(2, cycles);
+ s5pv310_pwm_start(2, 0);
+ return 0;
+}
+
+static void s5pv310_pwm_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ s5pv310_pwm_stop(2);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ s5pv310_pwm_init(2, clock_count_per_tick);
+ s5pv310_pwm_start(2, 1);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static struct clock_event_device pwm_event_device = {
+ .name = "pwm_timer2",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .shift = 32,
+ .set_next_event = s5pv310_pwm_set_next_event,
+ .set_mode = s5pv310_pwm_set_mode,
+};
+
+irqreturn_t s5pv310_clock_event_isr(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &pwm_event_device;
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction s5pv310_clock_event_irq = {
+ .name = "pwm_timer2_irq",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = s5pv310_clock_event_isr,
+};
+
+static void __init s5pv310_clockevent_init(void)
+{
+ unsigned long pclk;
+ unsigned long clock_rate;
+ struct clk *tscaler;
+
+ pclk = clk_get_rate(timerclk);
+
+ /* configure clock tick */
+
+ tscaler = clk_get_parent(tdiv2);
+
+ clk_set_rate(tscaler, pclk / 2);
+ clk_set_rate(tdiv2, pclk / 2);
+ clk_set_parent(tin2, tdiv2);
+
+ clock_rate = clk_get_rate(tin2);
+
+ clock_count_per_tick = clock_rate / HZ;
+
+ pwm_event_device.mult =
+ div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift);
+ pwm_event_device.max_delta_ns =
+ clockevent_delta2ns(-1, &pwm_event_device);
+ pwm_event_device.min_delta_ns =
+ clockevent_delta2ns(1, &pwm_event_device);
+
+ pwm_event_device.cpumask = cpumask_of(0);
+ clockevents_register_device(&pwm_event_device);
+
+ setup_irq(IRQ_TIMER2, &s5pv310_clock_event_irq);
+}
+
+static cycle_t s5pv310_pwm4_read(struct clocksource *cs)
+{
+ return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
+}
+
+struct clocksource pwm_clocksource = {
+ .name = "pwm_timer4",
+ .rating = 250,
+ .read = s5pv310_pwm4_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS ,
+};
+
+static void __init s5pv310_clocksource_init(void)
+{
+ unsigned long pclk;
+ unsigned long clock_rate;
+
+ pclk = clk_get_rate(timerclk);
+
+ clk_set_rate(tdiv4, pclk / 2);
+ clk_set_parent(tin4, tdiv4);
+
+ clock_rate = clk_get_rate(tin4);
+
+ s5pv310_pwm_init(4, ~0);
+ s5pv310_pwm_start(4, 1);
+
+ pwm_clocksource.mult =
+ clocksource_khz2mult(clock_rate/1000, pwm_clocksource.shift);
+
+ if (clocksource_register(&pwm_clocksource))
+ panic("%s: can't register clocksource\n", pwm_clocksource.name);
+}
+
+static void __init s5pv310_timer_resources(void)
+{
+ struct platform_device tmpdev;
+
+ tmpdev.dev.bus = &platform_bus_type;
+
+ timerclk = clk_get(NULL, "timers");
+ if (IS_ERR(timerclk))
+ panic("failed to get timers clock for system timer");
+
+ clk_enable(timerclk);
+
+ tmpdev.id = 2;
+ tin2 = clk_get(&tmpdev.dev, "pwm-tin");
+ if (IS_ERR(tin2))
+ panic("failed to get pwm-tin2 clock for system timer");
+
+ tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv");
+ if (IS_ERR(tdiv2))
+ panic("failed to get pwm-tdiv2 clock for system timer");
+ clk_enable(tin2);
+
+ tmpdev.id = 4;
+ tin4 = clk_get(&tmpdev.dev, "pwm-tin");
+ if (IS_ERR(tin4))
+ panic("failed to get pwm-tin4 clock for system timer");
+
+ tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv");
+ if (IS_ERR(tdiv4))
+ panic("failed to get pwm-tdiv4 clock for system timer");
+
+ clk_enable(tin4);
+}
+
+static void __init s5pv310_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = S5P_VA_TWD;
+#endif
+
+ s5pv310_timer_resources();
+ s5pv310_clockevent_init();
+ s5pv310_clocksource_init();
+}
+
+struct sys_timer s5pv310_timer = {
+ .init = s5pv310_timer_init,
+};
*/
#ifdef CONFIG_SA1111
#define NR_IRQS (IRQ_BOARD_END + 55)
-#elif defined(CONFIG_SHARPSL_LOCOMO)
+#elif defined(CONFIG_SHARP_LOCOMO)
#define NR_IRQS (IRQ_BOARD_START + 4)
#else
#define NR_IRQS (IRQ_BOARD_START)
select CPU_V6
select HAVE_CLK
select COMMON_CLKDEV
+ select SH_CLK_CPG
select GENERIC_CLOCKEVENTS
config ARCH_SH7377
select CPU_V7
select HAVE_CLK
select COMMON_CLKDEV
+ select SH_CLK_CPG
select GENERIC_CLOCKEVENTS
config ARCH_SH7372
select CPU_V7
select HAVE_CLK
select COMMON_CLKDEV
+ select SH_CLK_CPG
select GENERIC_CLOCKEVENTS
comment "SH-Mobile Board Type"
bool "AP4EVB board"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
+ select SH_LCD_MIPI_DSI
+
+choice
+ prompt "AP4EVB LCD panel selection"
+ default AP4EVB_QHD
+ depends on MACH_AP4EVB
+
+config AP4EVB_QHD
+ bool "MIPI-DSI QHD (960x540)"
+
+config AP4EVB_WVGA
+ bool "Parallel WVGA (800x480)"
+
+endchoice
comment "SH-Mobile System Configuration"
help
This enables build of the CMT timer driver.
+config SH_TIMER_TMU
+ bool "TMU timer driver"
+ default y
+ help
+ This enables build of the TMU timer driver.
+
endmenu
+config SH_CLK_CPG
+ bool
+
endif
#
# Common objects
-obj-y := timer.o console.o
+obj-y := timer.o console.o clock.o
# CPU objects
obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o
-obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7367.o intc-sh7377.o
-obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7367.o intc-sh7372.o
+obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o
+obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o
# Pinmux setup
pfc-$(CONFIG_ARCH_SH7367) := pfc-sh7367.o
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/usb/r8a66597.h>
+
+#include <sound/sh_fsi.h>
+
+#include <video/sh_mobile_hdmi.h>
+#include <video/sh_mobile_lcdc.h>
+#include <video/sh_mipi_dsi.h>
+
#include <mach/common.h>
+#include <mach/irqs.h>
#include <mach/sh7372.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/time.h>
/*
* Address Interface BusWidth note
*/
/*
- * KEYSC
+ * LCD / IRQ / KEYSC / IrDA
+ *
+ * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen)
+ * LCD = 2nd LCDC (WVGA)
*
- * SW43 KEYSC
- * -------------------------
- * ON enable
- * OFF disable
+ * | SW43 |
+ * SW3 | ON | OFF |
+ * -------------+-----------------------+---------------+
+ * ON | KEY / IrDA | LCD |
+ * OFF | KEY / IrDA / IRQ | IRQ |
+ *
+ *
+ * QHD / WVGA display
+ *
+ * You can choice display type on menuconfig.
+ * Then, check above dip-switch.
+ */
+
+/*
+ * USB
+ *
+ * J7 : 1-2 MAX3355E VBUS
+ * 2-3 DC 5.0V
+ *
+ * S39: bit2: off
+ */
+
+/*
+ * FSI/FSMI
+ *
+ * SW41 : ON : SH-Mobile AP4 Audio Mode
+ * : OFF : Bluetooth Audio Mode
+ */
+
+/*
+ * MMC0/SDHI1 (CN7)
+ *
+ * J22 : select card voltage
+ * 1-2 pin : 1.8v
+ * 2-3 pin : 3.3v
+ *
+ * SW1 | SW33
+ * | bit1 | bit2 | bit3 | bit4
+ * ------------+------+------+------+-------
+ * MMC0 OFF | OFF | ON | ON | X
+ * SDHI1 OFF | ON | X | OFF | ON
+ *
+ * voltage lebel
+ * CN7 : 1.8v
+ * CN12: 3.3v
*/
/* MTD */
.end = 0x16000000 - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = 6,
+ .start = evt2irq(0x02c0) /* IRQ6A */,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
},
};
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+ [0] = {
+ .name = "SH_MMCIF",
+ .start = 0xE6BD0000,
+ .end = 0xE6BD00FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* MMC ERR */
+ .start = evt2irq(0x1ac0),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* MMC NOR */
+ .start = evt2irq(0x1ae0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+ .sup_pclk = 0,
+ .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+ .caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NEEDS_POLL,
+};
+
+static struct platform_device sh_mmcif_device = {
+ .name = "sh_mmcif",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &sh_mmcif_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_mmcif_resources),
+ .resource = sh_mmcif_resources,
+};
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+ .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
+ .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
+};
+
+static struct resource sdhi0_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0xe6850000,
+ .end = 0xe68501ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x0e00) /* SDHI0 */,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi0_resources),
+ .resource = sdhi0_resources,
+ .id = 0,
+ .dev = {
+ .platform_data = &sdhi0_info,
+ },
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+ .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
+ .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
+ .tmio_ocr_mask = MMC_VDD_165_195,
+};
+
+static struct resource sdhi1_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0xe6860000,
+ .end = 0xe68601ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x0e80),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi1_resources),
+ .resource = sdhi1_resources,
+ .id = 1,
+ .dev = {
+ .platform_data = &sdhi1_info,
+ },
+};
+
+/* USB1 */
+static void usb1_host_port_power(int port, int power)
+{
+ if (!power) /* only power-on supported for now */
+ return;
+
+ /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
+ __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
+}
+
+static struct r8a66597_platdata usb1_host_data = {
+ .on_chip = 1,
+ .port_power = usb1_host_port_power,
+};
+
+static struct resource usb1_host_resources[] = {
+ [0] = {
+ .name = "USBHS",
+ .start = 0xE68B0000,
+ .end = 0xE68B00E6 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb1_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 1,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usb1_host_data,
+ },
+ .num_resources = ARRAY_SIZE(usb1_host_resources),
+ .resource = usb1_host_resources,
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ }
+};
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC",
+ .start = 0xfe940000, /* P4-only space */
+ .end = 0xfe943fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x580),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+ .resource = lcdc_resources,
+ .dev = {
+ .platform_data = &lcdc_info,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+/*
+ * QHD display
+ */
+#ifdef CONFIG_AP4EVB_QHD
+
/* KEYSC (Needs SW43 set to ON) */
static struct sh_keysc_info keysc_info = {
.mode = SH_KEYSC_MODE_1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 79,
+ .start = evt2irq(0x0be0), /* KEYSC_KEY */
.flags = IORESOURCE_IRQ,
},
};
},
};
-/* SDHI0 */
-static struct resource sdhi0_resources[] = {
+/* MIPI-DSI */
+static struct resource mipidsi0_resources[] = {
[0] = {
- .name = "SDHI0",
- .start = 0xe6850000,
- .end = 0xe68501ff,
+ .start = 0xffc60000,
+ .end = 0xffc68fff,
.flags = IORESOURCE_MEM,
},
+};
+
+static struct sh_mipi_dsi_info mipidsi0_info = {
+ .data_format = MIPI_RGB888,
+ .lcd_chan = &lcdc_info.ch[0],
+};
+
+static struct platform_device mipidsi0_device = {
+ .name = "sh-mipi-dsi",
+ .num_resources = ARRAY_SIZE(mipidsi0_resources),
+ .resource = mipidsi0_resources,
+ .id = 0,
+ .dev = {
+ .platform_data = &mipidsi0_info,
+ },
+};
+
+/* This function will disappear when we switch to (runtime) PM */
+static int __init ap4evb_init_display_clk(void)
+{
+ struct clk *lcdc_clk;
+ struct clk *dsitx_clk;
+ int ret;
+
+ lcdc_clk = clk_get(&lcdc_device.dev, "sh_mobile_lcdc_fb.0");
+ if (IS_ERR(lcdc_clk))
+ return PTR_ERR(lcdc_clk);
+
+ dsitx_clk = clk_get(&mipidsi0_device.dev, "sh-mipi-dsi.0");
+ if (IS_ERR(dsitx_clk)) {
+ ret = PTR_ERR(dsitx_clk);
+ goto eclkdsitxget;
+ }
+
+ ret = clk_enable(lcdc_clk);
+ if (ret < 0)
+ goto eclklcdcon;
+
+ ret = clk_enable(dsitx_clk);
+ if (ret < 0)
+ goto eclkdsitxon;
+
+ return 0;
+
+eclkdsitxon:
+ clk_disable(lcdc_clk);
+eclklcdcon:
+ clk_put(dsitx_clk);
+eclkdsitxget:
+ clk_put(lcdc_clk);
+
+ return ret;
+}
+device_initcall(ap4evb_init_display_clk);
+
+static struct platform_device *qhd_devices[] __initdata = {
+ &mipidsi0_device,
+ &keysc_device,
+};
+#endif /* CONFIG_AP4EVB_QHD */
+
+/* FSI */
+#define IRQ_FSI evt2irq(0x1840)
+#define FSIACKCR 0xE6150018
+static void fsiackcr_init(struct clk *clk)
+{
+ u32 status = __raw_readl(clk->enable_reg);
+
+ /* use external clock */
+ status &= ~0x000000ff;
+ status |= 0x00000080;
+ __raw_writel(status, clk->enable_reg);
+}
+
+static struct clk_ops fsiackcr_clk_ops = {
+ .init = fsiackcr_init,
+};
+
+static struct clk fsiackcr_clk = {
+ .ops = &fsiackcr_clk_ops,
+ .enable_reg = (void __iomem *)FSIACKCR,
+ .rate = 0, /* unknown */
+};
+
+static struct sh_fsi_platform_info fsi_info = {
+ .porta_flags = SH_FSI_BRS_INV |
+ SH_FSI_OUT_SLAVE_MODE |
+ SH_FSI_IN_SLAVE_MODE |
+ SH_FSI_OFMT(PCM) |
+ SH_FSI_IFMT(PCM),
+};
+
+static struct resource fsi_resources[] = {
+ [0] = {
+ .name = "FSI",
+ .start = 0xFE3C0000,
+ .end = 0xFE3C0400 - 1,
+ .flags = IORESOURCE_MEM,
+ },
[1] = {
- .start = 96,
+ .start = IRQ_FSI,
.flags = IORESOURCE_IRQ,
},
};
-static struct platform_device sdhi0_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi0_resources),
- .resource = sdhi0_resources,
- .id = 0,
+static struct platform_device fsi_device = {
+ .name = "sh_fsi2",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(fsi_resources),
+ .resource = fsi_resources,
+ .dev = {
+ .platform_data = &fsi_info,
+ },
+};
+
+static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
+ .clock_source = LCDC_CLK_EXTERNAL,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .interface_type = RGB24,
+ .clock_divider = 1,
+ .flags = LCDC_FLAGS_DWPOL,
+ .lcd_cfg = {
+ .name = "HDMI",
+ /* So far only 720p is supported */
+ .xres = 1280,
+ .yres = 720,
+ /*
+ * If left and right margins are not multiples of 8,
+ * LDHAJR will be adjusted accordingly by the LCDC
+ * driver. Until we start using EDID, these values
+ * might have to be adjusted for different monitors.
+ */
+ .left_margin = 200,
+ .right_margin = 88,
+ .hsync_len = 48,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .pixclock = 13468,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+ },
+ }
+};
+
+static struct resource lcdc1_resources[] = {
+ [0] = {
+ .name = "LCDC1",
+ .start = 0xfe944000,
+ .end = 0xfe947fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x17a0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lcdc1_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(lcdc1_resources),
+ .resource = lcdc1_resources,
+ .id = 1,
+ .dev = {
+ .platform_data = &sh_mobile_lcdc1_info,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+static struct sh_mobile_hdmi_info hdmi_info = {
+ .lcd_chan = &sh_mobile_lcdc1_info.ch[0],
+ .lcd_dev = &lcdc1_device.dev,
+};
+
+static struct resource hdmi_resources[] = {
+ [0] = {
+ .name = "HDMI",
+ .start = 0xe6be0000,
+ .end = 0xe6be00ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* There's also an HDMI interrupt on INTCS @ 0x18e0 */
+ .start = evt2irq(0x17e0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device hdmi_device = {
+ .name = "sh-mobile-hdmi",
+ .num_resources = ARRAY_SIZE(hdmi_resources),
+ .resource = hdmi_resources,
+ .id = -1,
+ .dev = {
+ .platform_data = &hdmi_info,
+ },
};
static struct platform_device *ap4evb_devices[] __initdata = {
&nor_flash_device,
&smc911x_device,
- &keysc_device,
&sdhi0_device,
+ &sdhi1_device,
+ &usb1_host_device,
+ &fsi_device,
+ &sh_mmcif_device,
+ &lcdc1_device,
+ &lcdc_device,
+ &hdmi_device,
+};
+
+static int __init hdmi_init_pm_clock(void)
+{
+ struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
+ int ret;
+ long rate;
+
+ if (IS_ERR(hdmi_ick)) {
+ ret = PTR_ERR(hdmi_ick);
+ pr_err("Cannot get HDMI ICK: %d\n", ret);
+ goto out;
+ }
+
+ ret = clk_set_parent(&pllc2_clk, &dv_clki_div2_clk);
+ if (ret < 0) {
+ pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, pllc2_clk.usecount);
+ goto out;
+ }
+
+ pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&pllc2_clk));
+
+ rate = clk_round_rate(&pllc2_clk, 594000000);
+ if (rate < 0) {
+ pr_err("Cannot get suitable rate: %ld\n", rate);
+ ret = rate;
+ goto out;
+ }
+
+ ret = clk_set_rate(&pllc2_clk, rate);
+ if (ret < 0) {
+ pr_err("Cannot set rate %ld: %d\n", rate, ret);
+ goto out;
+ }
+
+ pr_debug("PLLC2 set frequency %lu\n", rate);
+
+ ret = clk_set_parent(hdmi_ick, &pllc2_clk);
+ if (ret < 0) {
+ pr_err("Cannot set HDMI parent: %d\n", ret);
+ goto out;
+ }
+
+out:
+ if (!IS_ERR(hdmi_ick))
+ clk_put(hdmi_ick);
+ return ret;
+}
+
+device_initcall(hdmi_init_pm_clock);
+
+/*
+ * FIXME !!
+ *
+ * gpio_no_direction
+ * gpio_pull_up
+ * are quick_hack.
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static void __init gpio_no_direction(u32 addr)
+{
+ __raw_writeb(0x00, addr);
+}
+
+static void __init gpio_pull_up(u32 addr)
+{
+ u8 data = __raw_readb(addr);
+
+ data &= 0x0F;
+ data |= 0xC0;
+ __raw_writeb(data, addr);
+}
+
+/* TouchScreen */
+#define IRQ28 evt2irq(0x3380) /* IRQ28A */
+#define IRQ7 evt2irq(0x02e0) /* IRQ7A */
+static int ts_get_pendown_state(void)
+{
+ int val1, val2;
+
+ gpio_free(GPIO_FN_IRQ28_123);
+ gpio_free(GPIO_FN_IRQ7_40);
+
+ gpio_request(GPIO_PORT123, NULL);
+ gpio_request(GPIO_PORT40, NULL);
+
+ gpio_direction_input(GPIO_PORT123);
+ gpio_direction_input(GPIO_PORT40);
+
+ val1 = gpio_get_value(GPIO_PORT123);
+ val2 = gpio_get_value(GPIO_PORT40);
+
+ gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */
+ gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */
+
+ return val1 ^ val2;
+}
+
+#define PORT40CR 0xE6051028
+#define PORT123CR 0xE605007B
+static int ts_init(void)
+{
+ gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */
+ gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */
+
+ gpio_pull_up(PORT40CR);
+ gpio_pull_up(PORT123CR);
+
+ return 0;
+}
+
+static struct tsc2007_platform_data tsc2007_info = {
+ .model = 2007,
+ .x_plate_ohms = 180,
+ .get_pendown_state = ts_get_pendown_state,
+ .init_platform_hw = ts_init,
+};
+
+static struct i2c_board_info tsc_device = {
+ I2C_BOARD_INFO("tsc2007", 0x48),
+ .type = "tsc2007",
+ .platform_data = &tsc2007_info,
+ /*.irq is selected on ap4evb_init */
+};
+
+/* I2C */
+static struct i2c_board_info i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("ak4643", 0x13),
+ },
+};
+
+static struct i2c_board_info i2c1_devices[] = {
+ {
+ I2C_BOARD_INFO("r2025sd", 0x32),
+ },
};
static struct map_desc ap4evb_io_desc[] __initdata = {
{
iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
- /* setup early devices, clocks and console here as well */
+ /* setup early devices and console here as well */
sh7372_add_early_devices();
- sh7367_clock_init(); /* use g3 clocks for now */
shmobile_setup_console();
}
+#define GPIO_PORT9CR 0xE6051009
+#define GPIO_PORT10CR 0xE605100A
static void __init ap4evb_init(void)
{
+ u32 srcr4;
+ struct clk *clk;
+
sh7372_pinmux_init();
/* enable SCIFA0 */
gpio_export(GPIO_PORT34, 0);
gpio_export(GPIO_PORT35, 0);
+ /* SDHI0 */
+ gpio_request(GPIO_FN_SDHICD0, NULL);
+ gpio_request(GPIO_FN_SDHIWP0, NULL);
+ gpio_request(GPIO_FN_SDHICMD0, NULL);
+ gpio_request(GPIO_FN_SDHICLK0, NULL);
+ gpio_request(GPIO_FN_SDHID0_3, NULL);
+ gpio_request(GPIO_FN_SDHID0_2, NULL);
+ gpio_request(GPIO_FN_SDHID0_1, NULL);
+ gpio_request(GPIO_FN_SDHID0_0, NULL);
+
+ /* SDHI1 */
+ gpio_request(GPIO_FN_SDHICMD1, NULL);
+ gpio_request(GPIO_FN_SDHICLK1, NULL);
+ gpio_request(GPIO_FN_SDHID1_3, NULL);
+ gpio_request(GPIO_FN_SDHID1_2, NULL);
+ gpio_request(GPIO_FN_SDHID1_1, NULL);
+ gpio_request(GPIO_FN_SDHID1_0, NULL);
+
+ /* MMCIF */
+ gpio_request(GPIO_FN_MMCD0_0, NULL);
+ gpio_request(GPIO_FN_MMCD0_1, NULL);
+ gpio_request(GPIO_FN_MMCD0_2, NULL);
+ gpio_request(GPIO_FN_MMCD0_3, NULL);
+ gpio_request(GPIO_FN_MMCD0_4, NULL);
+ gpio_request(GPIO_FN_MMCD0_5, NULL);
+ gpio_request(GPIO_FN_MMCD0_6, NULL);
+ gpio_request(GPIO_FN_MMCD0_7, NULL);
+ gpio_request(GPIO_FN_MMCCMD0, NULL);
+ gpio_request(GPIO_FN_MMCCLK0, NULL);
+
+ /* USB enable */
+ gpio_request(GPIO_FN_VBUS0_1, NULL);
+ gpio_request(GPIO_FN_IDIN_1_18, NULL);
+ gpio_request(GPIO_FN_PWEN_1_115, NULL);
+ gpio_request(GPIO_FN_OVCN_1_114, NULL);
+ gpio_request(GPIO_FN_EXTLP_1, NULL);
+ gpio_request(GPIO_FN_OVCN2_1, NULL);
+
+ /* setup USB phy */
+ __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */
+
+ /* enable FSI2 */
+ gpio_request(GPIO_FN_FSIAIBT, NULL);
+ gpio_request(GPIO_FN_FSIAILR, NULL);
+ gpio_request(GPIO_FN_FSIAISLD, NULL);
+ gpio_request(GPIO_FN_FSIAOSLD, NULL);
+ gpio_request(GPIO_PORT161, NULL);
+ gpio_direction_output(GPIO_PORT161, 0); /* slave */
+
+ gpio_request(GPIO_PORT9, NULL);
+ gpio_request(GPIO_PORT10, NULL);
+ gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */
+ gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+
+ /* set SPU2 clock to 119.6 MHz */
+ clk = clk_get(NULL, "spu_clk");
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, clk_round_rate(clk, 119600000));
+ clk_put(clk);
+ }
+
+ /* change parent of FSI A */
+ clk = clk_get(NULL, "fsia_clk");
+ if (!IS_ERR(clk)) {
+ clk_register(&fsiackcr_clk);
+ clk_set_parent(clk, &fsiackcr_clk);
+ clk_put(clk);
+ }
+
+ /*
+ * set irq priority, to avoid sound chopping
+ * when NFS rootfs is used
+ * FSI(3) > SMSC911X(2)
+ */
+ intc_set_priority(IRQ_FSI, 3);
+
+ i2c_register_board_info(0, i2c0_devices,
+ ARRAY_SIZE(i2c0_devices));
+
+ i2c_register_board_info(1, i2c1_devices,
+ ARRAY_SIZE(i2c1_devices));
+
+#ifdef CONFIG_AP4EVB_QHD
+ /*
+ * QHD
+ */
+
/* enable KEYSC */
gpio_request(GPIO_FN_KEYOUT0, NULL);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYIN3_133, NULL);
gpio_request(GPIO_FN_KEYIN4, NULL);
- /* SDHI0 */
- gpio_request(GPIO_FN_SDHICD0, NULL);
- gpio_request(GPIO_FN_SDHIWP0, NULL);
- gpio_request(GPIO_FN_SDHICMD0, NULL);
- gpio_request(GPIO_FN_SDHICLK0, NULL);
- gpio_request(GPIO_FN_SDHID0_3, NULL);
- gpio_request(GPIO_FN_SDHID0_2, NULL);
- gpio_request(GPIO_FN_SDHID0_1, NULL);
- gpio_request(GPIO_FN_SDHID0_0, NULL);
+ /* enable TouchScreen */
+ set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
+
+ tsc_device.irq = IRQ28;
+ i2c_register_board_info(1, &tsc_device, 1);
+
+ /* LCDC0 */
+ lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
+ lcdc_info.ch[0].interface_type = RGB24;
+ lcdc_info.ch[0].clock_divider = 1;
+ lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
+ lcdc_info.ch[0].lcd_cfg.name = "R63302(QHD)";
+ lcdc_info.ch[0].lcd_cfg.xres = 544;
+ lcdc_info.ch[0].lcd_cfg.yres = 961;
+ lcdc_info.ch[0].lcd_cfg.left_margin = 72;
+ lcdc_info.ch[0].lcd_cfg.right_margin = 600;
+ lcdc_info.ch[0].lcd_cfg.hsync_len = 16;
+ lcdc_info.ch[0].lcd_cfg.upper_margin = 8;
+ lcdc_info.ch[0].lcd_cfg.lower_margin = 8;
+ lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
+ lcdc_info.ch[0].lcd_cfg.sync = FB_SYNC_VERT_HIGH_ACT |
+ FB_SYNC_HOR_HIGH_ACT;
+ lcdc_info.ch[0].lcd_size_cfg.width = 44;
+ lcdc_info.ch[0].lcd_size_cfg.height = 79;
+
+ platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices));
+
+#else
+ /*
+ * WVGA
+ */
+ gpio_request(GPIO_FN_LCDD17, NULL);
+ gpio_request(GPIO_FN_LCDD16, NULL);
+ gpio_request(GPIO_FN_LCDD15, NULL);
+ gpio_request(GPIO_FN_LCDD14, NULL);
+ gpio_request(GPIO_FN_LCDD13, NULL);
+ gpio_request(GPIO_FN_LCDD12, NULL);
+ gpio_request(GPIO_FN_LCDD11, NULL);
+ gpio_request(GPIO_FN_LCDD10, NULL);
+ gpio_request(GPIO_FN_LCDD9, NULL);
+ gpio_request(GPIO_FN_LCDD8, NULL);
+ gpio_request(GPIO_FN_LCDD7, NULL);
+ gpio_request(GPIO_FN_LCDD6, NULL);
+ gpio_request(GPIO_FN_LCDD5, NULL);
+ gpio_request(GPIO_FN_LCDD4, NULL);
+ gpio_request(GPIO_FN_LCDD3, NULL);
+ gpio_request(GPIO_FN_LCDD2, NULL);
+ gpio_request(GPIO_FN_LCDD1, NULL);
+ gpio_request(GPIO_FN_LCDD0, NULL);
+ gpio_request(GPIO_FN_LCDDISP, NULL);
+ gpio_request(GPIO_FN_LCDDCK, NULL);
+
+ gpio_request(GPIO_PORT189, NULL); /* backlight */
+ gpio_direction_output(GPIO_PORT189, 1);
+
+ gpio_request(GPIO_PORT151, NULL); /* LCDDON */
+ gpio_direction_output(GPIO_PORT151, 1);
+
+ lcdc_info.clock_source = LCDC_CLK_BUS;
+ lcdc_info.ch[0].interface_type = RGB18;
+ lcdc_info.ch[0].clock_divider = 2;
+ lcdc_info.ch[0].flags = 0;
+ lcdc_info.ch[0].lcd_cfg.name = "WVGA Panel";
+ lcdc_info.ch[0].lcd_cfg.xres = 800;
+ lcdc_info.ch[0].lcd_cfg.yres = 480;
+ lcdc_info.ch[0].lcd_cfg.left_margin = 220;
+ lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+ lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
+ lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+ lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+ lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+ lcdc_info.ch[0].lcd_cfg.sync = 0;
+ lcdc_info.ch[0].lcd_size_cfg.width = 152;
+ lcdc_info.ch[0].lcd_size_cfg.height = 91;
+
+ /* enable TouchScreen */
+ set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
+
+ tsc_device.irq = IRQ7;
+ i2c_register_board_info(0, &tsc_device, 1);
+#endif /* CONFIG_AP4EVB_QHD */
sh7372_add_standard_devices();
+ /* HDMI */
+ gpio_request(GPIO_FN_HDMI_HPD, NULL);
+ gpio_request(GPIO_FN_HDMI_CEC, NULL);
+
+ /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
+#define SRCR4 0xe61580bc
+ srcr4 = __raw_readl(SRCR4);
+ __raw_writel(srcr4 | (1 << 13), SRCR4);
+ udelay(50);
+ __raw_writel(srcr4 & ~(1 << 13), SRCR4);
+
platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
}
+static void __init ap4evb_timer_init(void)
+{
+ sh7372_clock_init();
+ shmobile_timer.init();
+
+ /* External clock source */
+ clk_set_rate(&dv_clki_clk, 27000000);
+}
+
+static struct sys_timer ap4evb_timer = {
+ .init = ap4evb_timer_init,
+};
+
MACHINE_START(AP4EVB, "ap4evb")
.phys_io = 0xe6000000,
.io_pg_offst = ((0xe6000000) >> 18) & 0xfffc,
.map_io = ap4evb_map_io,
.init_irq = sh7372_init_irq,
.init_machine = ap4evb_init,
- .timer = &shmobile_timer,
+ .timer = &ap4evb_timer,
MACHINE_END
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+/*
+ * IrDA
+ *
+ * S67: 5bit : ON power
+ * : 6bit : ON remote control
+ * OFF IrDA
+ */
static struct mtd_partition nor_flash_partitions[] = {
{
};
/* USBHS */
-void usb_host_port_power(int port, int power)
+static void usb_host_port_power(int port, int power)
{
if (!power) /* only power-on supported for now */
return;
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 65,
+ .start = evt2irq(0xa20), /* USBHS_USHI0 */
.flags = IORESOURCE_IRQ,
},
};
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 79,
+ .start = evt2irq(0xbe0), /* KEYSC_KEY */
.flags = IORESOURCE_IRQ,
},
};
},
};
+static struct resource irda_resources[] = {
+ [0] = {
+ .start = 0xE6D00000,
+ .end = 0xE6D01FD4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x480), /* IRDA */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device irda_device = {
+ .name = "sh_irda",
+ .id = -1,
+ .resource = irda_resources,
+ .num_resources = ARRAY_SIZE(irda_resources),
+};
+
static struct platform_device *g3evm_devices[] __initdata = {
&nor_flash_device,
&usb_host_device,
&keysc_device,
&nand_flash_device,
+ &irda_device,
};
static struct map_desc g3evm_io_desc[] __initdata = {
{
iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
- /* setup early devices, clocks and console here as well */
+ /* setup early devices and console here as well */
sh7367_add_early_devices();
- sh7367_clock_init();
shmobile_setup_console();
}
gpio_request(GPIO_FN_EXTLP, NULL);
gpio_request(GPIO_FN_IDIN, NULL);
- /* enable clock in SYMSTPCR2 */
- __raw_writel(__raw_readl(0xe6158048) & ~(1 << 22), 0xe6158048);
-
/* setup USB phy */
__raw_writew(0x0300, 0xe605810a); /* USBCR1 */
__raw_writew(0x00e0, 0xe60581c0); /* CPFCH */
/* FOE, FCDE, FSC on dedicated pins */
__raw_writel(__raw_readl(0xe6158048) & ~(1 << 15), 0xe6158048);
+ /* IrDA */
+ gpio_request(GPIO_FN_IRDA_OUT, NULL);
+ gpio_request(GPIO_FN_IRDA_IN, NULL);
+ gpio_request(GPIO_FN_IRDA_FIRSEL, NULL);
+ set_irq_type(evt2irq(0x480), IRQ_TYPE_LEVEL_LOW);
+
sh7367_add_standard_devices();
platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
}
+static void __init g3evm_timer_init(void)
+{
+ sh7367_clock_init();
+ shmobile_timer.init();
+}
+
+static struct sys_timer g3evm_timer = {
+ .init = g3evm_timer_init,
+};
+
MACHINE_START(G3EVM, "g3evm")
.phys_io = 0xe6000000,
.io_pg_offst = ((0xe6000000) >> 18) & 0xfffc,
.map_io = g3evm_map_io,
.init_irq = sh7367_init_irq,
.init_machine = g3evm_init,
- .timer = &shmobile_timer,
+ .timer = &g3evm_timer,
MACHINE_END
#include <linux/io.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
#include <linux/gpio.h>
#include <mach/sh7377.h>
#include <mach/common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+/*
+ * SDHI
+ *
+ * SDHI0 : card detection is possible
+ * SDHI1 : card detection is impossible
+ *
+ * [G4-MAIN-BOARD]
+ * JP74 : short # DBG_2V8A for SDHI0
+ * JP75 : NC # DBG_3V3A for SDHI0
+ * JP76 : NC # DBG_3V3A_SD for SDHI0
+ * JP77 : NC # 3V3A_SDIO for SDHI1
+ * JP78 : short # DBG_2V8A for SDHI1
+ * JP79 : NC # DBG_3V3A for SDHI1
+ * JP80 : NC # DBG_3V3A_SD for SDHI1
+ *
+ * [G4-CORE-BOARD]
+ * S32 : all off # to dissever from G3-CORE_DBG board
+ * S33 : all off # to dissever from G3-CORE_DBG board
+ *
+ * [G3-CORE_DBG-BOARD]
+ * S1 : all off # to dissever from G3-CORE_DBG board
+ * S3 : all off # to dissever from G3-CORE_DBG board
+ * S4 : all off # to dissever from G3-CORE_DBG board
+ */
static struct mtd_partition nor_flash_partitions[] = {
{
};
/* USBHS */
-void usb_host_port_power(int port, int power)
+static void usb_host_port_power(int port, int power)
{
if (!power) /* only power-on supported for now */
return;
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 65,
- .end = 65,
+ .start = evt2irq(0x0a20), /* USBHS_USHI0 */
.flags = IORESOURCE_IRQ,
},
};
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 79,
+ .start = evt2irq(0x0be0), /* KEYSC_KEY */
.flags = IORESOURCE_IRQ,
},
};
},
};
+/* SDHI */
+static struct resource sdhi0_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0xe6d50000,
+ .end = 0xe6d501ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x0e00), /* SDHI0 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi0_resources),
+ .resource = sdhi0_resources,
+ .id = 0,
+};
+
+static struct resource sdhi1_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0xe6d60000,
+ .end = 0xe6d601ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x0e80), /* SDHI1 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi1_resources),
+ .resource = sdhi1_resources,
+ .id = 1,
+};
+
static struct platform_device *g4evm_devices[] __initdata = {
&nor_flash_device,
&usb_host_device,
&keysc_device,
+ &sdhi0_device,
+ &sdhi1_device,
};
static struct map_desc g4evm_io_desc[] __initdata = {
{
iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
- /* setup early devices, clocks and console here as well */
+ /* setup early devices and console here as well */
sh7377_add_early_devices();
- sh7367_clock_init(); /* use g3 clocks for now */
shmobile_setup_console();
}
+#define GPIO_SDHID0_D0 0xe60520fc
+#define GPIO_SDHID0_D1 0xe60520fd
+#define GPIO_SDHID0_D2 0xe60520fe
+#define GPIO_SDHID0_D3 0xe60520ff
+#define GPIO_SDHICMD0 0xe6052100
+
+#define GPIO_SDHID1_D0 0xe6052103
+#define GPIO_SDHID1_D1 0xe6052104
+#define GPIO_SDHID1_D2 0xe6052105
+#define GPIO_SDHID1_D3 0xe6052106
+#define GPIO_SDHICMD1 0xe6052107
+
+/*
+ * FIXME !!
+ *
+ * gpio_pull_up is quick_hack.
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static void __init gpio_pull_up(u32 addr)
+{
+ u8 data = __raw_readb(addr);
+
+ data &= 0x0F;
+ data |= 0xC0;
+ __raw_writeb(data, addr);
+}
+
static void __init g4evm_init(void)
{
sh7377_pinmux_init();
gpio_request(GPIO_FN_EXTLP, NULL);
gpio_request(GPIO_FN_IDIN, NULL);
- /* enable clock in SMSTPCR3 */
- __raw_writel(__raw_readl(0xe615013c) & ~(1 << 22), 0xe615013c);
-
/* setup USB phy */
__raw_writew(0x0200, 0xe605810a); /* USBCR1 */
__raw_writew(0x00e0, 0xe60581c0); /* CPFCH */
gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
+ /* SDHI0 */
+ gpio_request(GPIO_FN_SDHICLK0, NULL);
+ gpio_request(GPIO_FN_SDHICD0, NULL);
+ gpio_request(GPIO_FN_SDHID0_0, NULL);
+ gpio_request(GPIO_FN_SDHID0_1, NULL);
+ gpio_request(GPIO_FN_SDHID0_2, NULL);
+ gpio_request(GPIO_FN_SDHID0_3, NULL);
+ gpio_request(GPIO_FN_SDHICMD0, NULL);
+ gpio_request(GPIO_FN_SDHIWP0, NULL);
+ gpio_pull_up(GPIO_SDHID0_D0);
+ gpio_pull_up(GPIO_SDHID0_D1);
+ gpio_pull_up(GPIO_SDHID0_D2);
+ gpio_pull_up(GPIO_SDHID0_D3);
+ gpio_pull_up(GPIO_SDHICMD0);
+
+ /* SDHI1 */
+ gpio_request(GPIO_FN_SDHICLK1, NULL);
+ gpio_request(GPIO_FN_SDHID1_0, NULL);
+ gpio_request(GPIO_FN_SDHID1_1, NULL);
+ gpio_request(GPIO_FN_SDHID1_2, NULL);
+ gpio_request(GPIO_FN_SDHID1_3, NULL);
+ gpio_request(GPIO_FN_SDHICMD1, NULL);
+ gpio_pull_up(GPIO_SDHID1_D0);
+ gpio_pull_up(GPIO_SDHID1_D1);
+ gpio_pull_up(GPIO_SDHID1_D2);
+ gpio_pull_up(GPIO_SDHID1_D3);
+ gpio_pull_up(GPIO_SDHICMD1);
+
sh7377_add_standard_devices();
platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
}
+static void __init g4evm_timer_init(void)
+{
+ sh7377_clock_init();
+ shmobile_timer.init();
+}
+
+static struct sys_timer g4evm_timer = {
+ .init = g4evm_timer_init,
+};
+
MACHINE_START(G4EVM, "g4evm")
.phys_io = 0xe6000000,
.io_pg_offst = ((0xe6000000) >> 18) & 0xfffc,
.map_io = g4evm_map_io,
.init_irq = sh7377_init_irq,
.init_machine = g4evm_init,
- .timer = &shmobile_timer,
+ .timer = &g4evm_timer,
MACHINE_END
/*
- * Preliminary clock framework support for sh7367
+ * SH7367 clock framework support
*
* Copyright (C) 2010 Magnus Damm
*
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+
+/* SH7367 registers */
+#define RTFRQCR 0xe6150000
+#define SYFRQCR 0xe6150004
+#define CMFRQCR 0xe61500E0
+#define VCLKCR1 0xe6150008
+#define VCLKCR2 0xe615000C
+#define VCLKCR3 0xe615001C
+#define SCLKACR 0xe6150010
+#define SCLKBCR 0xe6150014
+#define SUBUSBCKCR 0xe6158080
+#define SPUCKCR 0xe6150084
+#define MSUCKCR 0xe6150088
+#define MVI3CKCR 0xe6150090
+#define VOUCKCR 0xe6150094
+#define MFCK1CR 0xe6150098
+#define MFCK2CR 0xe615009C
+#define PLLC1CR 0xe6150028
+#define PLLC2CR 0xe615002C
+#define RTMSTPCR0 0xe6158030
+#define RTMSTPCR2 0xe6158038
+#define SYMSTPCR0 0xe6158040
+#define SYMSTPCR2 0xe6158048
+#define CMMSTPCR0 0xe615804c
-struct clk {
- const char *name;
- unsigned long rate;
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+ .rate = 32768,
};
-#include <asm/clkdev.h>
+/*
+ * 26MHz default rate for the EXTALB1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7367_extalb1_clk = {
+ .rate = 26666666,
+};
-int __clk_get(struct clk *clk)
-{
- return 1;
-}
-EXPORT_SYMBOL(__clk_get);
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7367_extal2_clk = {
+ .rate = 48000000,
+};
-void __clk_put(struct clk *clk)
+/* A fixed divide-by-2 block */
+static unsigned long div2_recalc(struct clk *clk)
{
+ return clk->parent->rate / 2;
}
-EXPORT_SYMBOL(__clk_put);
+static struct clk_ops div2_clk_ops = {
+ .recalc = div2_recalc,
+};
+
+/* Divide extalb1 by two */
+static struct clk extalb1_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &sh7367_extalb1_clk,
+};
+
+/* Divide extal2 by two */
+static struct clk extal2_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &sh7367_extal2_clk,
+};
-int clk_enable(struct clk *clk)
+/* PLLC1 */
+static unsigned long pllc1_recalc(struct clk *clk)
{
- return 0;
+ unsigned long mult = 1;
+
+ if (__raw_readl(PLLC1CR) & (1 << 14))
+ mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2;
+
+ return clk->parent->rate * mult;
}
-EXPORT_SYMBOL(clk_enable);
-void clk_disable(struct clk *clk)
+static struct clk_ops pllc1_clk_ops = {
+ .recalc = pllc1_recalc,
+};
+
+static struct clk pllc1_clk = {
+ .ops = &pllc1_clk_ops,
+ .flags = CLK_ENABLE_ON_INIT,
+ .parent = &extalb1_div2_clk,
+};
+
+/* Divide PLLC1 by two */
+static struct clk pllc1_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &pllc1_clk,
+};
+
+/* PLLC2 */
+static unsigned long pllc2_recalc(struct clk *clk)
{
+ unsigned long mult = 1;
+
+ if (__raw_readl(PLLC2CR) & (1 << 31))
+ mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
+
+ return clk->parent->rate * mult;
}
-EXPORT_SYMBOL(clk_disable);
-unsigned long clk_get_rate(struct clk *clk)
+static struct clk_ops pllc2_clk_ops = {
+ .recalc = pllc2_recalc,
+};
+
+static struct clk pllc2_clk = {
+ .ops = &pllc2_clk_ops,
+ .flags = CLK_ENABLE_ON_INIT,
+ .parent = &extalb1_div2_clk,
+};
+
+static struct clk *main_clks[] = {
+ &r_clk,
+ &sh7367_extalb1_clk,
+ &sh7367_extal2_clk,
+ &extalb1_div2_clk,
+ &extal2_div2_clk,
+ &pllc1_clk,
+ &pllc1_div2_clk,
+ &pllc2_clk,
+};
+
+static void div4_kick(struct clk *clk)
{
- return clk ? clk->rate : 0;
+ unsigned long value;
+
+ /* set KICK bit in SYFRQCR to update hardware setting */
+ value = __raw_readl(SYFRQCR);
+ value |= (1 << 31);
+ __raw_writel(value, SYFRQCR);
}
-EXPORT_SYMBOL(clk_get_rate);
-/* a static peripheral clock for now - enough to get sh-sci working */
-static struct clk peripheral_clk = {
- .name = "peripheral_clk",
- .rate = 48000000,
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+ 24, 32, 36, 48, 0, 72, 0, 0 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+ .divisors = divisors,
+ .nr_divisors = ARRAY_SIZE(divisors),
};
-/* a static rclk for now - enough to get sh_cmt working */
-static struct clk r_clk = {
- .name = "r_clk",
- .rate = 32768,
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+ .kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_G, DIV4_S, DIV4_B,
+ DIV4_ZX, DIV4_ZT, DIV4_Z, DIV4_ZD, DIV4_HP,
+ DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+ SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
+
+static struct clk div4_clks[DIV4_NR] = {
+ [DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_G] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_S] = DIV4(RTFRQCR, 12, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_ZX] = DIV4(SYFRQCR, 20, 0x6fff, 0),
+ [DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0),
+ [DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0),
+ [DIV4_ZD] = DIV4(SYFRQCR, 8, 0x6fff, 0),
+ [DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0),
+ [DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0),
+ [DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0),
+ [DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0),
+ [DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0),
};
-/* a static usb0 for now - enough to get r8a66597 working */
-static struct clk usb0_clk = {
- .name = "usb0",
+enum { DIV6_SUB, DIV6_SIUA, DIV6_SIUB, DIV6_MSU, DIV6_SPU,
+ DIV6_MVI3, DIV6_MF1, DIV6_MF2,
+ DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VOU,
+ DIV6_NR };
+
+static struct clk div6_clks[DIV6_NR] = {
+ [DIV6_SUB] = SH_CLK_DIV6(&sh7367_extal2_clk, SUBUSBCKCR, 0),
+ [DIV6_SIUA] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKACR, 0),
+ [DIV6_SIUB] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKBCR, 0),
+ [DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0),
+ [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
+ [DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0),
+ [DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0),
+ [DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0),
+ [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
+ [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
+ [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
+ [DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0),
};
-/* a static keysc0 clk for now - enough to get sh_keysc working */
-static struct clk keysc0_clk = {
- .name = "keysc0",
+enum { RTMSTP001,
+ RTMSTP231, RTMSTP230, RTMSTP229, RTMSTP228, RTMSTP226,
+ RTMSTP216, RTMSTP206, RTMSTP205, RTMSTP201,
+ SYMSTP023, SYMSTP007, SYMSTP006, SYMSTP004,
+ SYMSTP003, SYMSTP002, SYMSTP001, SYMSTP000,
+ SYMSTP231, SYMSTP229, SYMSTP225, SYMSTP223, SYMSTP222,
+ SYMSTP215, SYMSTP214, SYMSTP213, SYMSTP211,
+ CMMSTP003,
+ MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+ SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[MSTP_NR] = {
+ [RTMSTP001] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR0, 1, 0), /* IIC2 */
+ [RTMSTP231] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 31, 0), /* VEU3 */
+ [RTMSTP230] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 30, 0), /* VEU2 */
+ [RTMSTP229] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 29, 0), /* VEU1 */
+ [RTMSTP228] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 28, 0), /* VEU0 */
+ [RTMSTP226] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 26, 0), /* VEU2H */
+ [RTMSTP216] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR2, 16, 0), /* IIC0 */
+ [RTMSTP206] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 6, 0), /* JPU */
+ [RTMSTP205] = MSTP(&div6_clks[DIV6_VOU], RTMSTPCR2, 5, 0), /* VOU */
+ [RTMSTP201] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 1, 0), /* VPU */
+ [SYMSTP023] = MSTP(&div6_clks[DIV6_SPU], SYMSTPCR0, 23, 0), /* SPU1 */
+ [SYMSTP007] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 7, 0), /* SCIFA5 */
+ [SYMSTP006] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 6, 0), /* SCIFB */
+ [SYMSTP004] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 4, 0), /* SCIFA0 */
+ [SYMSTP003] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 3, 0), /* SCIFA1 */
+ [SYMSTP002] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 2, 0), /* SCIFA2 */
+ [SYMSTP001] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 1, 0), /* SCIFA3 */
+ [SYMSTP000] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 0, 0), /* SCIFA4 */
+ [SYMSTP231] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 31, 0), /* SIU */
+ [SYMSTP229] = MSTP(&r_clk, SYMSTPCR2, 29, 0), /* CMT10 */
+ [SYMSTP225] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 25, 0), /* IRDA */
+ [SYMSTP223] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 23, 0), /* IIC1 */
+ [SYMSTP222] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 22, 0), /* USBHS */
+ [SYMSTP215] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 15, 0), /* FLCTL */
+ [SYMSTP214] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 14, 0), /* SDHI0 */
+ [SYMSTP213] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 13, 0), /* SDHI1 */
+ [SYMSTP211] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 11, 0), /* SDHI2 */
+ [CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */
};
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+
static struct clk_lookup lookups[] = {
- {
- .clk = &peripheral_clk,
- }, {
- .clk = &r_clk,
- }, {
- .clk = &usb0_clk,
- }, {
- .clk = &keysc0_clk,
- }
+ /* main clocks */
+ CLKDEV_CON_ID("r_clk", &r_clk),
+ CLKDEV_CON_ID("extalb1", &sh7367_extalb1_clk),
+ CLKDEV_CON_ID("extal2", &sh7367_extal2_clk),
+ CLKDEV_CON_ID("extalb1_div2_clk", &extalb1_div2_clk),
+ CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
+ CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
+ CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
+ CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
+
+ /* DIV4 clocks */
+ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
+ CLKDEV_CON_ID("g_clk", &div4_clks[DIV4_G]),
+ CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
+ CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
+ CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
+ CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]),
+ CLKDEV_CON_ID("zd_clk", &div4_clks[DIV4_ZD]),
+ CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
+ CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]),
+ CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
+ CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
+ CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
+
+ /* DIV6 clocks */
+ CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
+ CLKDEV_CON_ID("siua_clk", &div6_clks[DIV6_SIUA]),
+ CLKDEV_CON_ID("siub_clk", &div6_clks[DIV6_SIUB]),
+ CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]),
+ CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
+ CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]),
+ CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]),
+ CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]),
+ CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+ CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+ CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
+ CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
+
+ /* MSTP32 clocks */
+ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[RTMSTP001]), /* IIC2 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[RTMSTP231]), /* VEU3 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[RTMSTP230]), /* VEU2 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[RTMSTP229]), /* VEU1 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[RTMSTP228]), /* VEU0 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[RTMSTP226]), /* VEU2H */
+ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[RTMSTP216]), /* IIC0 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[RTMSTP206]), /* JPU */
+ CLKDEV_DEV_ID("sh-vou", &mstp_clks[RTMSTP205]), /* VOU */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[RTMSTP201]), /* VPU */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[SYMSTP023]), /* SPU1 */
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[SYMSTP007]), /* SCIFA5 */
+ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[SYMSTP006]), /* SCIFB */
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[SYMSTP004]), /* SCIFA0 */
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[SYMSTP003]), /* SCIFA1 */
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[SYMSTP002]), /* SCIFA2 */
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[SYMSTP001]), /* SCIFA3 */
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[SYMSTP000]), /* SCIFA4 */
+ CLKDEV_DEV_ID("sh_siu", &mstp_clks[SYMSTP231]), /* SIU */
+ CLKDEV_CON_ID("cmt1", &mstp_clks[SYMSTP229]), /* CMT10 */
+ CLKDEV_DEV_ID("sh_irda", &mstp_clks[SYMSTP225]), /* IRDA */
+ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[SYMSTP223]), /* IIC1 */
+ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[SYMSTP222]), /* USBHS */
+ CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[SYMSTP222]), /* USBHS */
+ CLKDEV_DEV_ID("sh_flctl", &mstp_clks[SYMSTP215]), /* FLCTL */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[SYMSTP214]), /* SDHI0 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[SYMSTP213]), /* SDHI1 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[SYMSTP211]), /* SDHI2 */
+ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[CMMSTP003]), /* KEYSC */
};
void __init sh7367_clock_init(void)
{
- int i;
+ int k, ret = 0;
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+ ret = clk_register(main_clks[k]);
+
+ if (!ret)
+ ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+ if (!ret)
+ ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+ if (!ret)
+ ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
- for (i = 0; i < ARRAY_SIZE(lookups); i++) {
- lookups[i].con_id = lookups[i].clk->name;
- clkdev_add(&lookups[i]);
- }
+ if (!ret)
+ clk_init();
+ else
+ panic("failed to setup sh7367 clocks\n");
}
--- /dev/null
+/*
+ * SH7372 clock framework support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+
+/* SH7372 registers */
+#define FRQCRA 0xe6150000
+#define FRQCRB 0xe6150004
+#define FRQCRC 0xe61500e0
+#define FRQCRD 0xe61500e4
+#define VCLKCR1 0xe6150008
+#define VCLKCR2 0xe615000c
+#define VCLKCR3 0xe615001c
+#define FMSICKCR 0xe6150010
+#define FMSOCKCR 0xe6150014
+#define FSIACKCR 0xe6150018
+#define FSIBCKCR 0xe6150090
+#define SUBCKCR 0xe6150080
+#define SPUCKCR 0xe6150084
+#define VOUCKCR 0xe6150088
+#define HDMICKCR 0xe6150094
+#define DSITCKCR 0xe6150060
+#define DSI0PCKCR 0xe6150064
+#define DSI1PCKCR 0xe6150098
+#define PLLC01CR 0xe6150028
+#define PLLC2CR 0xe615002c
+#define SMSTPCR0 0xe6150130
+#define SMSTPCR1 0xe6150134
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR4 0xe6150140
+
+/* Platforms must set frequency on their DV_CLKI pin */
+struct clk dv_clki_clk = {
+};
+
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+ .rate = 32768,
+};
+
+/*
+ * 26MHz default rate for the EXTAL1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7372_extal1_clk = {
+ .rate = 26000000,
+};
+
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7372_extal2_clk = {
+ .rate = 48000000,
+};
+
+/* A fixed divide-by-2 block */
+static unsigned long div2_recalc(struct clk *clk)
+{
+ return clk->parent->rate / 2;
+}
+
+static struct clk_ops div2_clk_ops = {
+ .recalc = div2_recalc,
+};
+
+/* Divide dv_clki by two */
+struct clk dv_clki_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &dv_clki_clk,
+};
+
+/* Divide extal1 by two */
+static struct clk extal1_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &sh7372_extal1_clk,
+};
+
+/* Divide extal2 by two */
+static struct clk extal2_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &sh7372_extal2_clk,
+};
+
+/* Divide extal2 by four */
+static struct clk extal2_div4_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &extal2_div2_clk,
+};
+
+/* PLLC0 and PLLC1 */
+static unsigned long pllc01_recalc(struct clk *clk)
+{
+ unsigned long mult = 1;
+
+ if (__raw_readl(PLLC01CR) & (1 << 14))
+ mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1) * 2;
+
+ return clk->parent->rate * mult;
+}
+
+static struct clk_ops pllc01_clk_ops = {
+ .recalc = pllc01_recalc,
+};
+
+static struct clk pllc0_clk = {
+ .ops = &pllc01_clk_ops,
+ .flags = CLK_ENABLE_ON_INIT,
+ .parent = &extal1_div2_clk,
+ .enable_reg = (void __iomem *)FRQCRC,
+};
+
+static struct clk pllc1_clk = {
+ .ops = &pllc01_clk_ops,
+ .flags = CLK_ENABLE_ON_INIT,
+ .parent = &extal1_div2_clk,
+ .enable_reg = (void __iomem *)FRQCRA,
+};
+
+/* Divide PLLC1 by two */
+static struct clk pllc1_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &pllc1_clk,
+};
+
+/* PLLC2 */
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *pllc2_parent[] = {
+ [0] = &extal1_div2_clk,
+ [1] = &extal2_div2_clk,
+ [2] = &dv_clki_div2_clk,
+};
+
+/* Only multipliers 20 * 2 to 46 * 2 are valid, last entry for CPUFREQ_TABLE_END */
+static struct cpufreq_frequency_table pllc2_freq_table[29];
+
+static void pllc2_table_rebuild(struct clk *clk)
+{
+ int i;
+
+ /* Initialise PLLC2 frequency table */
+ for (i = 0; i < ARRAY_SIZE(pllc2_freq_table) - 2; i++) {
+ pllc2_freq_table[i].frequency = clk->parent->rate * (i + 20) * 2;
+ pllc2_freq_table[i].index = i;
+ }
+
+ /* This is a special entry - switching PLL off makes it a repeater */
+ pllc2_freq_table[i].frequency = clk->parent->rate;
+ pllc2_freq_table[i].index = i;
+
+ pllc2_freq_table[++i].frequency = CPUFREQ_TABLE_END;
+ pllc2_freq_table[i].index = i;
+}
+
+static unsigned long pllc2_recalc(struct clk *clk)
+{
+ unsigned long mult = 1;
+
+ pllc2_table_rebuild(clk);
+
+ /*
+ * If the PLL is off, mult == 1, clk->rate will be updated in
+ * pllc2_enable().
+ */
+ if (__raw_readl(PLLC2CR) & (1 << 31))
+ mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
+
+ return clk->parent->rate * mult;
+}
+
+static long pllc2_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk_rate_table_round(clk, clk->freq_table, rate);
+}
+
+static int pllc2_enable(struct clk *clk)
+{
+ int i;
+
+ __raw_writel(__raw_readl(PLLC2CR) | 0x80000000, PLLC2CR);
+
+ for (i = 0; i < 100; i++)
+ if (__raw_readl(PLLC2CR) & 0x80000000) {
+ clk->rate = pllc2_recalc(clk);
+ return 0;
+ }
+
+ pr_err("%s(): timeout!\n", __func__);
+
+ return -ETIMEDOUT;
+}
+
+static void pllc2_disable(struct clk *clk)
+{
+ __raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
+}
+
+static int pllc2_set_rate(struct clk *clk,
+ unsigned long rate, int algo_id)
+{
+ unsigned long value;
+ int idx;
+
+ idx = clk_rate_table_find(clk, clk->freq_table, rate);
+ if (idx < 0)
+ return idx;
+
+ if (rate == clk->parent->rate) {
+ pllc2_disable(clk);
+ return 0;
+ }
+
+ value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
+
+ if (value & 0x80000000)
+ pllc2_disable(clk);
+
+ __raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
+
+ if (value & 0x80000000)
+ return pllc2_enable(clk);
+
+ return 0;
+}
+
+static int pllc2_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 value;
+ int ret, i;
+
+ if (!clk->parent_table || !clk->parent_num)
+ return -EINVAL;
+
+ /* Search the parent */
+ for (i = 0; i < clk->parent_num; i++)
+ if (clk->parent_table[i] == parent)
+ break;
+
+ if (i == clk->parent_num)
+ return -ENODEV;
+
+ ret = clk_reparent(clk, parent);
+ if (ret < 0)
+ return ret;
+
+ value = __raw_readl(PLLC2CR) & ~(3 << 6);
+
+ __raw_writel(value | (i << 6), PLLC2CR);
+
+ /* Rebiuld the frequency table */
+ pllc2_table_rebuild(clk);
+
+ return 0;
+}
+
+static struct clk_ops pllc2_clk_ops = {
+ .recalc = pllc2_recalc,
+ .round_rate = pllc2_round_rate,
+ .set_rate = pllc2_set_rate,
+ .enable = pllc2_enable,
+ .disable = pllc2_disable,
+ .set_parent = pllc2_set_parent,
+};
+
+struct clk pllc2_clk = {
+ .ops = &pllc2_clk_ops,
+ .flags = CLK_ENABLE_ON_INIT,
+ .parent = &extal1_div2_clk,
+ .freq_table = pllc2_freq_table,
+ .parent_table = pllc2_parent,
+ .parent_num = ARRAY_SIZE(pllc2_parent),
+};
+
+static struct clk *main_clks[] = {
+ &dv_clki_clk,
+ &r_clk,
+ &sh7372_extal1_clk,
+ &sh7372_extal2_clk,
+ &dv_clki_div2_clk,
+ &extal1_div2_clk,
+ &extal2_div2_clk,
+ &extal2_div4_clk,
+ &pllc0_clk,
+ &pllc1_clk,
+ &pllc1_div2_clk,
+ &pllc2_clk,
+};
+
+static void div4_kick(struct clk *clk)
+{
+ unsigned long value;
+
+ /* set KICK bit in FRQCRB to update hardware setting */
+ value = __raw_readl(FRQCRB);
+ value |= (1 << 31);
+ __raw_writel(value, FRQCRB);
+}
+
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+ 24, 32, 36, 48, 0, 72, 96, 0 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+ .divisors = divisors,
+ .nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+ .kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
+ DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP,
+ DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP,
+ DIV4_DDRP, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+ SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
+
+static struct clk div4_clks[DIV4_NR] = {
+ [DIV4_I] = DIV4(FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_ZG] = DIV4(FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0),
+ [DIV4_ZTR] = DIV4(FRQCRB, 20, 0x6fff, 0),
+ [DIV4_ZT] = DIV4(FRQCRB, 16, 0x6fff, 0),
+ [DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0),
+ [DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0),
+ [DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0),
+ [DIV4_S] = DIV4(FRQCRC, 12, 0x6fff, 0),
+ [DIV4_ZB] = DIV4(FRQCRC, 8, 0x6fff, 0),
+ [DIV4_ZB3] = DIV4(FRQCRC, 4, 0x6fff, 0),
+ [DIV4_CP] = DIV4(FRQCRC, 0, 0x6fff, 0),
+ [DIV4_DDRP] = DIV4(FRQCRD, 0, 0x677c, 0),
+};
+
+enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO,
+ DIV6_FSIA, DIV6_FSIB, DIV6_SUB, DIV6_SPU,
+ DIV6_VOU, DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
+ DIV6_NR };
+
+static struct clk div6_clks[DIV6_NR] = {
+ [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
+ [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
+ [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
+ [DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0),
+ [DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0),
+ [DIV6_FSIA] = SH_CLK_DIV6(&pllc1_div2_clk, FSIACKCR, 0),
+ [DIV6_FSIB] = SH_CLK_DIV6(&pllc1_div2_clk, FSIBCKCR, 0),
+ [DIV6_SUB] = SH_CLK_DIV6(&sh7372_extal2_clk, SUBCKCR, 0),
+ [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
+ [DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0),
+ [DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0),
+ [DIV6_DSI0P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI0PCKCR, 0),
+ [DIV6_DSI1P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI1PCKCR, 0),
+};
+
+enum { DIV6_HDMI, DIV6_REPARENT_NR };
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *hdmi_parent[] = {
+ [0] = &pllc1_div2_clk,
+ [1] = &pllc2_clk,
+ [2] = &dv_clki_clk,
+ [3] = NULL, /* pllc2_div4 not implemented yet */
+};
+
+static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
+ [DIV6_HDMI] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, HDMICKCR, 0,
+ hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
+};
+
+enum { MSTP001,
+ MSTP131, MSTP130,
+ MSTP129, MSTP128,
+ MSTP118, MSTP117, MSTP116,
+ MSTP106, MSTP101, MSTP100,
+ MSTP223,
+ MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+ MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312,
+ MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403,
+ MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+ SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
+ [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
+ [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
+ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
+ [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
+ [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
+ [MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
+ [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
+ [MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */
+ [MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */
+ [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
+ [MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */
+ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
+ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
+ [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
+ [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
+ [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
+ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
+ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+ [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, CLK_ENABLE_ON_INIT), /* FSIA */
+ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
+ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
+ [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
+ [MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */
+ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */
+ [MSTP415] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */
+ [MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */
+ [MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */
+ [MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */
+ [MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */
+ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
+};
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+ /* main clocks */
+ CLKDEV_CON_ID("dv_clki_div2_clk", &dv_clki_div2_clk),
+ CLKDEV_CON_ID("r_clk", &r_clk),
+ CLKDEV_CON_ID("extal1", &sh7372_extal1_clk),
+ CLKDEV_CON_ID("extal2", &sh7372_extal2_clk),
+ CLKDEV_CON_ID("extal1_div2_clk", &extal1_div2_clk),
+ CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
+ CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk),
+ CLKDEV_CON_ID("pllc0_clk", &pllc0_clk),
+ CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
+ CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
+ CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
+
+ /* DIV4 clocks */
+ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
+ CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
+ CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
+ CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
+ CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
+ CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
+ CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
+ CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
+ CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
+ CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]),
+ CLKDEV_CON_ID("s_clk", &div4_clks[DIV4_S]),
+ CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
+ CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
+ CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
+ CLKDEV_CON_ID("ddrp_clk", &div4_clks[DIV4_DDRP]),
+
+ /* DIV6 clocks */
+ CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+ CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+ CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
+ CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
+ CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
+ CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FSIA]),
+ CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FSIB]),
+ CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
+ CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
+ CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
+ CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]),
+ CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]),
+ CLKDEV_CON_ID("dsi0p_clk", &div6_clks[DIV6_DSI0P]),
+ CLKDEV_CON_ID("dsi1p_clk", &div6_clks[DIV6_DSI1P]),
+
+ /* MSTP32 clocks */
+ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
+ CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
+ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
+ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */
+ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+ CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */
+ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
+ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
+ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
+ CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
+ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* SDHI2 */
+ CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */
+ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */
+ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */
+ CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
+ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
+ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+ {.con_id = "ick", .dev_id = "sh-mobile-hdmi", .clk = &div6_reparent_clks[DIV6_HDMI]},
+};
+
+void __init sh7372_clock_init(void)
+{
+ int k, ret = 0;
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+ ret = clk_register(main_clks[k]);
+
+ if (!ret)
+ ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+ if (!ret)
+ ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+ if (!ret)
+ ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_NR);
+
+ if (!ret)
+ ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ if (!ret)
+ clk_init();
+ else
+ panic("failed to setup sh7372 clocks\n");
+
+}
--- /dev/null
+/*
+ * SH7377 clock framework support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+
+/* SH7377 registers */
+#define RTFRQCR 0xe6150000
+#define SYFRQCR 0xe6150004
+#define CMFRQCR 0xe61500E0
+#define VCLKCR1 0xe6150008
+#define VCLKCR2 0xe615000C
+#define VCLKCR3 0xe615001C
+#define FMSICKCR 0xe6150010
+#define FMSOCKCR 0xe6150014
+#define FSICKCR 0xe6150018
+#define PLLC1CR 0xe6150028
+#define PLLC2CR 0xe615002C
+#define SUBUSBCKCR 0xe6150080
+#define SPUCKCR 0xe6150084
+#define MSUCKCR 0xe6150088
+#define MVI3CKCR 0xe6150090
+#define HDMICKCR 0xe6150094
+#define MFCK1CR 0xe6150098
+#define MFCK2CR 0xe615009C
+#define DSITCKCR 0xe6150060
+#define DSIPCKCR 0xe6150064
+#define SMSTPCR0 0xe6150130
+#define SMSTPCR1 0xe6150134
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR3 0xe615013C
+#define SMSTPCR4 0xe6150140
+
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+ .rate = 32768,
+};
+
+/*
+ * 26MHz default rate for the EXTALC1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7377_extalc1_clk = {
+ .rate = 26666666,
+};
+
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7377_extal2_clk = {
+ .rate = 48000000,
+};
+
+/* A fixed divide-by-2 block */
+static unsigned long div2_recalc(struct clk *clk)
+{
+ return clk->parent->rate / 2;
+}
+
+static struct clk_ops div2_clk_ops = {
+ .recalc = div2_recalc,
+};
+
+/* Divide extalc1 by two */
+static struct clk extalc1_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &sh7377_extalc1_clk,
+};
+
+/* Divide extal2 by two */
+static struct clk extal2_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &sh7377_extal2_clk,
+};
+
+/* Divide extal2 by four */
+static struct clk extal2_div4_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &extal2_div2_clk,
+};
+
+/* PLLC1 */
+static unsigned long pllc1_recalc(struct clk *clk)
+{
+ unsigned long mult = 1;
+
+ if (__raw_readl(PLLC1CR) & (1 << 14))
+ mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2;
+
+ return clk->parent->rate * mult;
+}
+
+static struct clk_ops pllc1_clk_ops = {
+ .recalc = pllc1_recalc,
+};
+
+static struct clk pllc1_clk = {
+ .ops = &pllc1_clk_ops,
+ .flags = CLK_ENABLE_ON_INIT,
+ .parent = &extalc1_div2_clk,
+};
+
+/* Divide PLLC1 by two */
+static struct clk pllc1_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &pllc1_clk,
+};
+
+/* PLLC2 */
+static unsigned long pllc2_recalc(struct clk *clk)
+{
+ unsigned long mult = 1;
+
+ if (__raw_readl(PLLC2CR) & (1 << 31))
+ mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
+
+ return clk->parent->rate * mult;
+}
+
+static struct clk_ops pllc2_clk_ops = {
+ .recalc = pllc2_recalc,
+};
+
+static struct clk pllc2_clk = {
+ .ops = &pllc2_clk_ops,
+ .flags = CLK_ENABLE_ON_INIT,
+ .parent = &extalc1_div2_clk,
+};
+
+static struct clk *main_clks[] = {
+ &r_clk,
+ &sh7377_extalc1_clk,
+ &sh7377_extal2_clk,
+ &extalc1_div2_clk,
+ &extal2_div2_clk,
+ &extal2_div4_clk,
+ &pllc1_clk,
+ &pllc1_div2_clk,
+ &pllc2_clk,
+};
+
+static void div4_kick(struct clk *clk)
+{
+ unsigned long value;
+
+ /* set KICK bit in SYFRQCR to update hardware setting */
+ value = __raw_readl(SYFRQCR);
+ value |= (1 << 31);
+ __raw_writel(value, SYFRQCR);
+}
+
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+ 24, 32, 36, 48, 0, 72, 96, 0 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+ .divisors = divisors,
+ .nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+ .kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
+ DIV4_ZTR, DIV4_ZT, DIV4_Z, DIV4_HP,
+ DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+ SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
+
+static struct clk div4_clks[DIV4_NR] = {
+ [DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_ZG] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_M1] = DIV4(RTFRQCR, 4, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_CSIR] = DIV4(RTFRQCR, 0, 0x6fff, 0),
+ [DIV4_ZTR] = DIV4(SYFRQCR, 20, 0x6fff, 0),
+ [DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0),
+ [DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0),
+ [DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0),
+ [DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0),
+ [DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0),
+ [DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0),
+ [DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0),
+};
+
+enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO,
+ DIV6_FSI, DIV6_SUB, DIV6_SPU, DIV6_MSU, DIV6_MVI3, DIV6_HDMI,
+ DIV6_MF1, DIV6_MF2, DIV6_DSIT, DIV6_DSIP,
+ DIV6_NR };
+
+static struct clk div6_clks[] = {
+ [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
+ [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
+ [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
+ [DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0),
+ [DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0),
+ [DIV6_FSI] = SH_CLK_DIV6(&pllc1_div2_clk, FSICKCR, 0),
+ [DIV6_SUB] = SH_CLK_DIV6(&sh7377_extal2_clk, SUBUSBCKCR, 0),
+ [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
+ [DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0),
+ [DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0),
+ [DIV6_HDMI] = SH_CLK_DIV6(&pllc1_div2_clk, HDMICKCR, 0),
+ [DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0),
+ [DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0),
+ [DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0),
+ [DIV6_DSIP] = SH_CLK_DIV6(&pllc1_div2_clk, DSIPCKCR, 0),
+};
+
+enum { MSTP001,
+ MSTP131, MSTP130, MSTP129, MSTP128, MSTP116, MSTP106, MSTP101,
+ MSTP223, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+ MSTP331, MSTP329, MSTP325, MSTP323, MSTP322,
+ MSTP315, MSTP314, MSTP313,
+ MSTP403,
+ MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+ SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[] = {
+ [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
+ [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
+ [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
+ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
+ [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
+ [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
+ [MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */
+ [MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */
+ [MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */
+ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
+ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
+ [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
+ [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
+ [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
+ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
+ [MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
+ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+ [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IRDA */
+ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
+ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
+ [MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL */
+ [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
+ [MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */
+ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
+};
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+ /* main clocks */
+ CLKDEV_CON_ID("r_clk", &r_clk),
+ CLKDEV_CON_ID("extalc1", &sh7377_extalc1_clk),
+ CLKDEV_CON_ID("extal2", &sh7377_extal2_clk),
+ CLKDEV_CON_ID("extalc1_div2_clk", &extalc1_div2_clk),
+ CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
+ CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk),
+ CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
+ CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
+ CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
+
+ /* DIV4 clocks */
+ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
+ CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
+ CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
+ CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
+ CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
+ CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
+ CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
+ CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]),
+ CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
+ CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]),
+ CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
+ CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
+ CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
+
+ /* DIV6 clocks */
+ CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+ CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+ CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
+ CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
+ CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
+ CLKDEV_CON_ID("fsi_clk", &div6_clks[DIV6_FSI]),
+ CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
+ CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
+ CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]),
+ CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]),
+ CLKDEV_CON_ID("hdmi_clk", &div6_clks[DIV6_HDMI]),
+ CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]),
+ CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]),
+ CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]),
+ CLKDEV_CON_ID("dsip_clk", &div6_clks[DIV6_DSIP]),
+
+ /* MSTP32 clocks */
+ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
+ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */
+ CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP206]), /* SCIFB */
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
+ CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */
+ CLKDEV_DEV_ID("sh_irda", &mstp_clks[MSTP325]), /* IRDA */
+ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
+ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USBHS */
+ CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USBHS */
+ CLKDEV_DEV_ID("sh_flctl", &mstp_clks[MSTP315]), /* FLCTL */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
+ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+};
+
+void __init sh7377_clock_init(void)
+{
+ int k, ret = 0;
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+ ret = clk_register(main_clks[k]);
+
+ if (!ret)
+ ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+ if (!ret)
+ ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+ if (!ret)
+ ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ if (!ret)
+ clk_init();
+ else
+ panic("failed to setup sh7377 clocks\n");
+}
--- /dev/null
+/*
+ * SH-Mobile Timer
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sh_clk.h>
+
+int __init clk_init(void)
+{
+ /* Kick the child clocks.. */
+ recalculate_root_clocks();
+
+ /* Enable the necessary init clocks */
+ clk_enable_init_clocks();
+
+ return 0;
+}
+
+int __clk_get(struct clk *clk)
+{
+ return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
extern struct sys_timer shmobile_timer;
extern void shmobile_setup_console(void);
+struct clk;
+extern int clk_init(void);
extern void sh7367_init_irq(void);
extern void sh7367_add_early_devices(void);
extern void sh7367_add_standard_devices(void);
extern void sh7367_clock_init(void);
extern void sh7367_pinmux_init(void);
+extern struct clk sh7367_extalb1_clk;
+extern struct clk sh7367_extal2_clk;
extern void sh7377_init_irq(void);
extern void sh7377_add_early_devices(void);
extern void sh7377_add_standard_devices(void);
+extern void sh7377_clock_init(void);
extern void sh7377_pinmux_init(void);
+extern struct clk sh7377_extalc1_clk;
+extern struct clk sh7377_extal2_clk;
extern void sh7372_init_irq(void);
extern void sh7372_add_early_devices(void);
extern void sh7372_add_standard_devices(void);
+extern void sh7372_clock_init(void);
extern void sh7372_pinmux_init(void);
+extern struct clk sh7372_extal1_clk;
+extern struct clk sh7372_extal2_clk;
#endif /* __ARCH_MACH_COMMON_H */
#define NR_IRQS 512
+/* INTCA */
#define evt2irq(evt) (((evt) >> 5) - 16)
#define irq2evt(irq) (((irq) + 16) << 5)
+/* INTCS */
+#define INTCS_VECT_BASE 0x2200
+#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
+#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+
#endif /* __ASM_MACH_IRQS_H */
#define PHYS_OFFSET UL(CONFIG_MEMORY_START)
#define MEM_SIZE UL(CONFIG_MEMORY_SIZE)
+/* DMA memory at 0xf6000000 - 0xffdfffff */
+#define CONSISTENT_DMA_SIZE (158 << 20)
+
#endif /* __ASM_MACH_MEMORY_H */
#ifndef __ASM_SH7372_H__
#define __ASM_SH7372_H__
+#include <linux/sh_clk.h>
+
/*
* Pin Function Controller:
* GPIO_FN_xx - GPIO used to select pin function
GPIO_FN_SDENC_DV_CLKI,
};
+/* DMA slave IDs */
+enum {
+ SHDMA_SLAVE_SCIF0_TX,
+ SHDMA_SLAVE_SCIF0_RX,
+ SHDMA_SLAVE_SCIF1_TX,
+ SHDMA_SLAVE_SCIF1_RX,
+ SHDMA_SLAVE_SCIF2_TX,
+ SHDMA_SLAVE_SCIF2_RX,
+ SHDMA_SLAVE_SCIF3_TX,
+ SHDMA_SLAVE_SCIF3_RX,
+ SHDMA_SLAVE_SCIF4_TX,
+ SHDMA_SLAVE_SCIF4_RX,
+ SHDMA_SLAVE_SCIF5_TX,
+ SHDMA_SLAVE_SCIF5_RX,
+ SHDMA_SLAVE_SCIF6_TX,
+ SHDMA_SLAVE_SCIF6_RX,
+ SHDMA_SLAVE_SDHI0_RX,
+ SHDMA_SLAVE_SDHI0_TX,
+ SHDMA_SLAVE_SDHI1_RX,
+ SHDMA_SLAVE_SDHI1_TX,
+ SHDMA_SLAVE_SDHI2_RX,
+ SHDMA_SLAVE_SDHI2_TX,
+};
+
+extern struct clk dv_clki_clk;
+extern struct clk dv_clki_div2_clk;
+extern struct clk pllc2_clk;
+
#endif /* __ASM_SH7372_H__ */
#ifndef __ASM_MACH_VMALLOC_H
#define __ASM_MACH_VMALLOC_H
-#define VMALLOC_END (PAGE_OFFSET + 0x24000000)
+/* Vmalloc at ... - 0xe5ffffff */
+#define VMALLOC_END 0xe6000000
#endif /* __ASM_MACH_VMALLOC_H */
ETM11, ARM11, USBHS, FLCTL, IIC1
};
-static struct intc_vect intca_vectors[] = {
+static struct intc_vect intca_vectors[] __initdata = {
INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
};
-static struct intc_mask_reg intca_mask_registers[] = {
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
{ IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
MISTY, CMT3, RWDT1, RWDT0 } },
};
-static struct intc_prio_reg intca_prio_registers[] = {
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
{ IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
intca_sense_registers, intca_ack_registers),
};
+enum {
+ UNUSED_INTCS = 0,
+
+ INTCS,
+
+ /* interrupt sources INTCS */
+ VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3,
+ VIO3_VOU,
+ RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
+ VIO1_CEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2,
+ VPU,
+ SGX530,
+ _2DDMAC_2DDM0, _2DDMAC_2DDM1, _2DDMAC_2DDM2, _2DDMAC_2DDM3,
+ IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
+ IPMMU_IPMMUB, IPMMU_IPMMUS,
+ RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
+ MSIOF,
+ IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
+ TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
+ CMT,
+ TSIF,
+ IPMMUI,
+ MVI3,
+ ICB,
+ PEP,
+ ASA,
+ BEM,
+ VE2HO,
+ HQE,
+ JPEG,
+ LCDC,
+
+ /* interrupt groups INTCS */
+ _2DDMAC, RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2,
+};
+
+static struct intc_vect intcs_vectors[] = {
+ INTCS_VECT(VIO2_VEU0, 0x700), INTCS_VECT(VIO2_VEU1, 0x720),
+ INTCS_VECT(VIO2_VEU2, 0x740), INTCS_VECT(VIO2_VEU3, 0x760),
+ INTCS_VECT(VIO3_VOU, 0x780),
+ INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
+ INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
+ INTCS_VECT(VIO1_CEU, 0x880), INTCS_VECT(VIO1_BEU0, 0x8a0),
+ INTCS_VECT(VIO1_BEU1, 0x8c0), INTCS_VECT(VIO1_BEU2, 0x8e0),
+ INTCS_VECT(VPU, 0x980),
+ INTCS_VECT(SGX530, 0x9e0),
+ INTCS_VECT(_2DDMAC_2DDM0, 0xa00), INTCS_VECT(_2DDMAC_2DDM1, 0xa20),
+ INTCS_VECT(_2DDMAC_2DDM2, 0xa40), INTCS_VECT(_2DDMAC_2DDM3, 0xa60),
+ INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
+ INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
+ INTCS_VECT(IPMMU_IPMMUB, 0xb20), INTCS_VECT(IPMMU_IPMMUS, 0xb60),
+ INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
+ INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
+ INTCS_VECT(MSIOF, 0xd20),
+ INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
+ INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
+ INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
+ INTCS_VECT(TMU_TUNI2, 0xec0),
+ INTCS_VECT(CMT, 0xf00),
+ INTCS_VECT(TSIF, 0xf20),
+ INTCS_VECT(IPMMUI, 0xf60),
+ INTCS_VECT(MVI3, 0x420),
+ INTCS_VECT(ICB, 0x480),
+ INTCS_VECT(PEP, 0x4a0),
+ INTCS_VECT(ASA, 0x4c0),
+ INTCS_VECT(BEM, 0x4e0),
+ INTCS_VECT(VE2HO, 0x520),
+ INTCS_VECT(HQE, 0x540),
+ INTCS_VECT(JPEG, 0x560),
+ INTCS_VECT(LCDC, 0x580),
+
+ INTC_VECT(INTCS, 0xf80),
+};
+
+static struct intc_group intcs_groups[] __initdata = {
+ INTC_GROUP(_2DDMAC, _2DDMAC_2DDM0, _2DDMAC_2DDM1,
+ _2DDMAC_2DDM2, _2DDMAC_2DDM3),
+ INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1,
+ RTDMAC_1_DEI2, RTDMAC_1_DEI3),
+ INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR),
+ INTC_GROUP(VEU, VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3),
+ INTC_GROUP(BEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2),
+ INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
+ INTC_GROUP(IPMMU, IPMMU_IPMMUS, IPMMU_IPMMUB),
+ INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] = {
+ { 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
+ { VIO1_BEU2, VIO1_BEU1, VIO1_BEU0, VIO1_CEU,
+ VIO2_VEU3, VIO2_VEU2, VIO2_VEU1, VIO2_VEU0 } },
+ { 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
+ { VIO3_VOU, 0, VE2HO, VPU,
+ 0, 0, 0, 0 } },
+ { 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
+ { _2DDMAC_2DDM3, _2DDMAC_2DDM2, _2DDMAC_2DDM1, _2DDMAC_2DDM0,
+ BEM, ASA, PEP, ICB } },
+ { 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
+ { 0, 0, MVI3, 0,
+ JPEG, HQE, 0, LCDC } },
+ { 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
+ { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4,
+ RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
+ { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
+ { 0, 0, MSIOF, 0,
+ SGX530, 0, 0, 0 } },
+ { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
+ { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
+ 0, 0, 0, 0 } },
+ { 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
+ { 0, 0, 0, CMT,
+ IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
+ { 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */
+ { IPMMU_IPMMUS, 0, IPMMU_IPMMUB, 0,
+ 0, 0, 0, 0 } },
+ { 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
+ { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
+ 0, 0, IPMMUI, TSIF } },
+ { 0xffd20104, 0, 16, /* INTAMASK */
+ { 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, INTCS } },
+};
+
+/* Priority is needed for INTCA to receive the INTCS interrupt */
+static struct intc_prio_reg intcs_prio_registers[] = {
+ { 0xffd20000, 0, 16, 4, /* IPRAS */ { 0, MVI3, _2DDMAC, ICB } },
+ { 0xffd20004, 0, 16, 4, /* IPRBS */ { JPEG, LCDC, 0, 0 } },
+ { 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } },
+ { 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, VIO1_CEU, 0, VPU } },
+ { 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT } },
+ { 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1,
+ TMU_TUNI2, 0 } },
+ { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, VIO3_VOU, VEU, BEU } },
+ { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF, IIC0 } },
+ { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, SGX530, 0, 0 } },
+ { 0xffd20028, 0, 16, 4, /* IPRKS */ { BEM, ASA, IPMMUI, PEP } },
+ { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, VE2HO, HQE } },
+ { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
+};
+
+static struct resource intcs_resources[] __initdata = {
+ [0] = {
+ .start = 0xffd20000,
+ .end = 0xffd2ffff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct intc_desc intcs_desc __initdata = {
+ .name = "sh7367-intcs",
+ .resource = intcs_resources,
+ .num_resources = ARRAY_SIZE(intcs_resources),
+ .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
+ intcs_prio_registers, NULL, NULL),
+};
+
+static void intcs_demux(unsigned int irq, struct irq_desc *desc)
+{
+ void __iomem *reg = (void *)get_irq_data(irq);
+ unsigned int evtcodeas = ioread32(reg);
+
+ generic_handle_irq(intcs_evt2irq(evtcodeas));
+}
+
void __init sh7367_init_irq(void)
{
- /* INTCA */
+ void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+
register_intc_controller(&intca_desc);
+ register_intc_controller(&intcs_desc);
+
+ /* demux using INTEVTSA */
+ set_irq_data(evt2irq(0xf80), (void *)intevtsa);
+ set_irq_chained_handler(evt2irq(0xf80), intcs_demux);
}
{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
CMT14, CMT15 } },
- { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
+ { 0xe695003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
MMC_MMC_ERR, MMC_MMC_NOR } },
- { 0xe6940040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
+ { 0xe6950040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
IIC4_WAITI4, IIC4_DTEI4 } },
- { 0xe6940044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
+ { 0xe6950044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
IIC3_WAITI3, IIC3_DTEI3 } },
- { 0xe6940048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
+ { 0xe6950048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
0/*TXI*/, 0/*TEI*/} },
- { 0xe694004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
+ { 0xe695004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
USB1_USB1I1, USB1_USB1I0 } },
- { 0xe6940050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
+ { 0xe6950050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
};
static struct intc_sense_reg intca_sense_registers[] __initdata = {
intca_sense_registers, intca_ack_registers),
};
+enum {
+ UNUSED_INTCS = 0,
+
+ INTCS,
+
+ /* interrupt sources INTCS */
+ VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3,
+ RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
+ CEU, BEU_BEU0, BEU_BEU1, BEU_BEU2,
+ VPU,
+ TSIF1,
+ _3DG_SGX530,
+ _2DDMAC,
+ IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
+ IPMMU_IPMMUR, IPMMU_IPMMUR2,
+ RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
+ MSIOF,
+ IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
+ TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
+ CMT0,
+ TSIF0,
+ LMB,
+ CTI,
+ ICB,
+ JPU_JPEG,
+ LCDC,
+ LCRC,
+ RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
+ RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR,
+ ISP,
+ LCDC1,
+ CSIRX,
+ DSITX_DSITX0,
+ DSITX_DSITX1,
+ TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
+ CMT4,
+ DSITX1_DSITX1_0,
+ DSITX1_DSITX1_1,
+ CPORTS2R,
+ JPU6E,
+
+ /* interrupt groups INTCS */
+ RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2,
+ RTDMAC2_1, RTDMAC2_2, TMU1, DSITX,
+};
+
+static struct intc_vect intcs_vectors[] = {
+ INTCS_VECT(VEU_VEU0, 0x700), INTCS_VECT(VEU_VEU1, 0x720),
+ INTCS_VECT(VEU_VEU2, 0x740), INTCS_VECT(VEU_VEU3, 0x760),
+ INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
+ INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
+ INTCS_VECT(CEU, 0x880), INTCS_VECT(BEU_BEU0, 0x8a0),
+ INTCS_VECT(BEU_BEU1, 0x8c0), INTCS_VECT(BEU_BEU2, 0x8e0),
+ INTCS_VECT(VPU, 0x980),
+ INTCS_VECT(TSIF1, 0x9a0),
+ INTCS_VECT(_3DG_SGX530, 0x9e0),
+ INTCS_VECT(_2DDMAC, 0xa00),
+ INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
+ INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
+ INTCS_VECT(IPMMU_IPMMUR, 0xb00), INTCS_VECT(IPMMU_IPMMUR2, 0xb20),
+ INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
+ INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
+ INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
+ INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
+ INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
+ INTCS_VECT(TMU_TUNI2, 0xec0),
+ INTCS_VECT(CMT0, 0xf00),
+ INTCS_VECT(TSIF0, 0xf20),
+ INTCS_VECT(LMB, 0xf60),
+ INTCS_VECT(CTI, 0x400),
+ INTCS_VECT(ICB, 0x480),
+ INTCS_VECT(JPU_JPEG, 0x560),
+ INTCS_VECT(LCDC, 0x580),
+ INTCS_VECT(LCRC, 0x5a0),
+ INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320),
+ INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360),
+ INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13a0),
+ INTCS_VECT(RTDMAC2_2_DADERR, 0x13c0),
+ INTCS_VECT(ISP, 0x1720),
+ INTCS_VECT(LCDC1, 0x1780),
+ INTCS_VECT(CSIRX, 0x17a0),
+ INTCS_VECT(DSITX_DSITX0, 0x17c0),
+ INTCS_VECT(DSITX_DSITX1, 0x17e0),
+ INTCS_VECT(TMU1_TUNI0, 0x1900), INTCS_VECT(TMU1_TUNI1, 0x1920),
+ INTCS_VECT(TMU1_TUNI2, 0x1940),
+ INTCS_VECT(CMT4, 0x1980),
+ INTCS_VECT(DSITX1_DSITX1_0, 0x19a0),
+ INTCS_VECT(DSITX1_DSITX1_1, 0x19c0),
+ INTCS_VECT(CPORTS2R, 0x1a20),
+ INTCS_VECT(JPU6E, 0x1a80),
+
+ INTC_VECT(INTCS, 0xf80),
+};
+
+static struct intc_group intcs_groups[] __initdata = {
+ INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1,
+ RTDMAC_1_DEI2, RTDMAC_1_DEI3),
+ INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR),
+ INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3),
+ INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2),
+ INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
+ INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2),
+ INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
+ INTC_GROUP(RTDMAC2_1, RTDMAC2_1_DEI0, RTDMAC2_1_DEI1,
+ RTDMAC2_1_DEI2, RTDMAC2_1_DEI3),
+ INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4,
+ RTDMAC2_2_DEI5, RTDMAC2_2_DADERR),
+ INTC_GROUP(TMU1, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0),
+ INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] = {
+ { 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
+ { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU,
+ VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } },
+ { 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
+ { 0, 0, 0, VPU,
+ 0, 0, 0, 0 } },
+ { 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
+ { 0, 0, 0, _2DDMAC,
+ 0, 0, 0, ICB } },
+ { 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
+ { 0, 0, 0, CTI,
+ JPU_JPEG, 0, LCRC, LCDC } },
+ { 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
+ { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4,
+ RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
+ { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
+ { 0, 0, MSIOF, 0,
+ _3DG_SGX530, 0, 0, 0 } },
+ { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
+ { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
+ 0, 0, 0, 0 } },
+ { 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
+ { 0, 0, 0, CMT0,
+ IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
+ { 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */
+ { 0, 0, IPMMU_IPMMUR2, IPMMU_IPMMUR,
+ 0, 0, 0, 0 } },
+ { 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
+ { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
+ 0, TSIF1, LMB, TSIF0 } },
+ { 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */
+ { 0, RTDMAC2_2_DADERR, RTDMAC2_2_DEI5, RTDMAC2_2_DEI4,
+ RTDMAC2_1_DEI3, RTDMAC2_1_DEI2, RTDMAC2_1_DEI1, RTDMAC2_1_DEI0 } },
+ { 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */
+ { 0, ISP, 0, 0,
+ LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } },
+ { 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */
+ { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
+ CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } },
+ { 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
+ { 0, CPORTS2R, 0, 0,
+ JPU6E, 0, 0, 0 } },
+ { 0xffd20104, 0, 16, /* INTAMASK */
+ { 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, INTCS } },
+};
+
+/* Priority is needed for INTCA to receive the INTCS interrupt */
+static struct intc_prio_reg intcs_prio_registers[] = {
+ { 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC, ICB } },
+ { 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } },
+ { 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, CEU, 0, VPU } },
+ { 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT0 } },
+ { 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1,
+ TMU_TUNI2, TSIF1 } },
+ { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } },
+ { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } },
+ { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } },
+ { 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } },
+ { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } },
+ { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
+ { 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC2_1, 0, 0, 0 } },
+ { 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC2_2, 0, 0, 0 } },
+ { 0xffd50020, 0, 16, 4, /* IPRIS3 */ { 0, ISP, 0, 0 } },
+ { 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX, 0 } },
+ { 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } },
+ { 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0,
+ DSITX1_DSITX1_1, 0 } },
+ { 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0, CPORTS2R, 0, 0 } },
+ { 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } },
+};
+
+static struct resource intcs_resources[] __initdata = {
+ [0] = {
+ .start = 0xffd20000,
+ .end = 0xffd201ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0xffd50000,
+ .end = 0xffd501ff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct intc_desc intcs_desc __initdata = {
+ .name = "sh7372-intcs",
+ .resource = intcs_resources,
+ .num_resources = ARRAY_SIZE(intcs_resources),
+ .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
+ intcs_prio_registers, NULL, NULL),
+};
+
+static void intcs_demux(unsigned int irq, struct irq_desc *desc)
+{
+ void __iomem *reg = (void *)get_irq_data(irq);
+ unsigned int evtcodeas = ioread32(reg);
+
+ generic_handle_irq(intcs_evt2irq(evtcodeas));
+}
+
void __init sh7372_init_irq(void)
{
+ void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+
register_intc_controller(&intca_desc);
+ register_intc_controller(&intcs_desc);
+
+ /* demux using INTEVTSA */
+ set_irq_data(evt2irq(0xf80), (void *)intevtsa);
+ set_irq_chained_handler(evt2irq(0xf80), intcs_demux);
}
ICUSB, ICUDMC
};
-static struct intc_vect intca_vectors[] = {
+static struct intc_vect intca_vectors[] __initdata = {
INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2),
};
-static struct intc_mask_reg intca_mask_registers[] = {
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
{ IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
SCIFA6, 0, 0, 0 } },
};
-static struct intc_prio_reg intca_prio_registers[] = {
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
{ IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
intca_sense_registers, intca_ack_registers),
};
+/* this macro ignore entry which is also in INTCA */
+#define __IGNORE(a...)
+#define __IGNORE0(a...) 0
+
+enum {
+ UNUSED_INTCS = 0,
+
+ INTCS,
+
+ /* interrupt sources INTCS */
+ VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3,
+ RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, RTDMAC1_1_DEI2, RTDMAC1_1_DEI3,
+ CEU,
+ BEU_BEU0, BEU_BEU1, BEU_BEU2,
+ __IGNORE(MFI)
+ __IGNORE(BBIF2)
+ VPU,
+ TSIF1,
+ __IGNORE(SGX540)
+ _2DDMAC,
+ IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
+ IPMMU_IPMMUR, IPMMU_IPMMUR2,
+ RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR,
+ __IGNORE(KEYSC)
+ __IGNORE(TTI20)
+ __IGNORE(MSIOF)
+ IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
+ TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
+ CMT0,
+ TSIF0,
+ __IGNORE(CMT2)
+ LMB,
+ __IGNORE(MSUG)
+ __IGNORE(MSU_MSU, MSU_MSU2)
+ __IGNORE(CTI)
+ MVI3,
+ __IGNORE(RWDT0)
+ __IGNORE(RWDT1)
+ ICB,
+ PEP,
+ ASA,
+ __IGNORE(_2DG)
+ HQE,
+ JPU,
+ LCDC0,
+ __IGNORE(LCRC)
+ RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
+ RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR,
+ FRC,
+ LCDC1,
+ CSIRX,
+ DSITX_DSITX0, DSITX_DSITX1,
+ __IGNORE(SPU2_SPU0, SPU2_SPU1)
+ __IGNORE(FSI)
+ __IGNORE(FMSI)
+ __IGNORE(SCUV)
+ TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12,
+ TSIF2,
+ CMT4,
+ __IGNORE(MFIS2)
+ CPORTS2R,
+
+ /* interrupt groups INTCS */
+ RTDMAC1_1, RTDMAC1_2, VEU, BEU, IIC0, __IGNORE(MSU) IPMMU,
+ IIC2, RTDMAC2_1, RTDMAC2_2, DSITX, __IGNORE(SPU2) TMU1,
+};
+
+#define INTCS_INTVECT 0x0F80
+static struct intc_vect intcs_vectors[] __initdata = {
+ INTCS_VECT(VEU_VEU0, 0x0700), INTCS_VECT(VEU_VEU1, 0x0720),
+ INTCS_VECT(VEU_VEU2, 0x0740), INTCS_VECT(VEU_VEU3, 0x0760),
+ INTCS_VECT(RTDMAC1_1_DEI0, 0x0800), INTCS_VECT(RTDMAC1_1_DEI1, 0x0820),
+ INTCS_VECT(RTDMAC1_1_DEI2, 0x0840), INTCS_VECT(RTDMAC1_1_DEI3, 0x0860),
+ INTCS_VECT(CEU, 0x0880),
+ INTCS_VECT(BEU_BEU0, 0x08A0),
+ INTCS_VECT(BEU_BEU1, 0x08C0),
+ INTCS_VECT(BEU_BEU2, 0x08E0),
+ __IGNORE(INTCS_VECT(MFI, 0x0900))
+ __IGNORE(INTCS_VECT(BBIF2, 0x0960))
+ INTCS_VECT(VPU, 0x0980),
+ INTCS_VECT(TSIF1, 0x09A0),
+ __IGNORE(INTCS_VECT(SGX540, 0x09E0))
+ INTCS_VECT(_2DDMAC, 0x0A00),
+ INTCS_VECT(IIC2_ALI2, 0x0A80), INTCS_VECT(IIC2_TACKI2, 0x0AA0),
+ INTCS_VECT(IIC2_WAITI2, 0x0AC0), INTCS_VECT(IIC2_DTEI2, 0x0AE0),
+ INTCS_VECT(IPMMU_IPMMUR, 0x0B00), INTCS_VECT(IPMMU_IPMMUR2, 0x0B20),
+ INTCS_VECT(RTDMAC1_2_DEI4, 0x0B80),
+ INTCS_VECT(RTDMAC1_2_DEI5, 0x0BA0),
+ INTCS_VECT(RTDMAC1_2_DADERR, 0x0BC0),
+ __IGNORE(INTCS_VECT(KEYSC 0x0BE0))
+ __IGNORE(INTCS_VECT(TTI20, 0x0C80))
+ __IGNORE(INTCS_VECT(MSIOF, 0x0D20))
+ INTCS_VECT(IIC0_ALI0, 0x0E00), INTCS_VECT(IIC0_TACKI0, 0x0E20),
+ INTCS_VECT(IIC0_WAITI0, 0x0E40), INTCS_VECT(IIC0_DTEI0, 0x0E60),
+ INTCS_VECT(TMU_TUNI0, 0x0E80),
+ INTCS_VECT(TMU_TUNI1, 0x0EA0),
+ INTCS_VECT(TMU_TUNI2, 0x0EC0),
+ INTCS_VECT(CMT0, 0x0F00),
+ INTCS_VECT(TSIF0, 0x0F20),
+ __IGNORE(INTCS_VECT(CMT2, 0x0F40))
+ INTCS_VECT(LMB, 0x0F60),
+ __IGNORE(INTCS_VECT(MSUG, 0x0F80))
+ __IGNORE(INTCS_VECT(MSU_MSU, 0x0FA0))
+ __IGNORE(INTCS_VECT(MSU_MSU2, 0x0FC0))
+ __IGNORE(INTCS_VECT(CTI, 0x0400))
+ INTCS_VECT(MVI3, 0x0420),
+ __IGNORE(INTCS_VECT(RWDT0, 0x0440))
+ __IGNORE(INTCS_VECT(RWDT1, 0x0460))
+ INTCS_VECT(ICB, 0x0480),
+ INTCS_VECT(PEP, 0x04A0),
+ INTCS_VECT(ASA, 0x04C0),
+ __IGNORE(INTCS_VECT(_2DG, 0x04E0))
+ INTCS_VECT(HQE, 0x0540),
+ INTCS_VECT(JPU, 0x0560),
+ INTCS_VECT(LCDC0, 0x0580),
+ __IGNORE(INTCS_VECT(LCRC, 0x05A0))
+ INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320),
+ INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360),
+ INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13A0),
+ INTCS_VECT(RTDMAC2_2_DADERR, 0x13C0),
+ INTCS_VECT(FRC, 0x1700),
+ INTCS_VECT(LCDC1, 0x1780),
+ INTCS_VECT(CSIRX, 0x17A0),
+ INTCS_VECT(DSITX_DSITX0, 0x17C0), INTCS_VECT(DSITX_DSITX1, 0x17E0),
+ __IGNORE(INTCS_VECT(SPU2_SPU0, 0x1800))
+ __IGNORE(INTCS_VECT(SPU2_SPU1, 0x1820))
+ __IGNORE(INTCS_VECT(FSI, 0x1840))
+ __IGNORE(INTCS_VECT(FMSI, 0x1860))
+ __IGNORE(INTCS_VECT(SCUV, 0x1880))
+ INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920),
+ INTCS_VECT(TMU1_TUNI12, 0x1940),
+ INTCS_VECT(TSIF2, 0x1960),
+ INTCS_VECT(CMT4, 0x1980),
+ __IGNORE(INTCS_VECT(MFIS2, 0x1A00))
+ INTCS_VECT(CPORTS2R, 0x1A20),
+
+ INTC_VECT(INTCS, INTCS_INTVECT),
+};
+
+static struct intc_group intcs_groups[] __initdata = {
+ INTC_GROUP(RTDMAC1_1,
+ RTDMAC1_1_DEI0, RTDMAC1_1_DEI1,
+ RTDMAC1_1_DEI2, RTDMAC1_1_DEI3),
+ INTC_GROUP(RTDMAC1_2,
+ RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR),
+ INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3),
+ INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2),
+ INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
+ __IGNORE(INTC_GROUP(MSU, MSU_MSU, MSU_MSU2))
+ INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2),
+ INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
+ INTC_GROUP(RTDMAC2_1,
+ RTDMAC2_1_DEI0, RTDMAC2_1_DEI1,
+ RTDMAC2_1_DEI2, RTDMAC2_1_DEI3),
+ INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR),
+ INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1),
+ __IGNORE(INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1))
+ INTC_GROUP(TMU1, TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] __initdata = {
+ { 0xE6940184, 0xE69401C4, 8, /* IMR1AS / IMCR1AS */
+ { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU,
+ VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } },
+ { 0xE6940188, 0xE69401C8, 8, /* IMR2AS / IMCR2AS */
+ { 0, 0, 0, VPU,
+ __IGNORE0(BBIF2), 0, 0, __IGNORE0(MFI) } },
+ { 0xE694018C, 0xE69401CC, 8, /* IMR3AS / IMCR3AS */
+ { 0, 0, 0, _2DDMAC,
+ __IGNORE0(_2DG), ASA, PEP, ICB } },
+ { 0xE6940190, 0xE69401D0, 8, /* IMR4AS / IMCR4AS */
+ { 0, 0, MVI3, __IGNORE0(CTI),
+ JPU, HQE, __IGNORE0(LCRC), LCDC0 } },
+ { 0xE6940194, 0xE69401D4, 8, /* IMR5AS / IMCR5AS */
+ { __IGNORE0(KEYSC), RTDMAC1_2_DADERR, RTDMAC1_2_DEI5, RTDMAC1_2_DEI4,
+ RTDMAC1_1_DEI3, RTDMAC1_1_DEI2, RTDMAC1_1_DEI1, RTDMAC1_1_DEI0 } },
+ __IGNORE({ 0xE6940198, 0xE69401D8, 8, /* IMR6AS / IMCR6AS */
+ { 0, 0, MSIOF, 0,
+ SGX540, 0, TTI20, 0 } })
+ { 0xE694019C, 0xE69401DC, 8, /* IMR7AS / IMCR7AS */
+ { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
+ 0, 0, 0, 0 } },
+ __IGNORE({ 0xE69401A0, 0xE69401E0, 8, /* IMR8AS / IMCR8AS */
+ { 0, 0, 0, 0,
+ 0, MSU_MSU, MSU_MSU2, MSUG } })
+ { 0xE69401A4, 0xE69401E4, 8, /* IMR9AS / IMCR9AS */
+ { __IGNORE0(RWDT1), __IGNORE0(RWDT0), __IGNORE0(CMT2), CMT0,
+ IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
+ { 0xE69401A8, 0xE69401E8, 8, /* IMR10AS / IMCR10AS */
+ { 0, 0, IPMMU_IPMMUR, IPMMU_IPMMUR2,
+ 0, 0, 0, 0 } },
+ { 0xE69401AC, 0xE69401EC, 8, /* IMR11AS / IMCR11AS */
+ { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
+ 0, TSIF1, LMB, TSIF0 } },
+ { 0xE6950180, 0xE69501C0, 8, /* IMR0AS3 / IMCR0AS3 */
+ { RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
+ RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, 0 } },
+ { 0xE6950190, 0xE69501D0, 8, /* IMR4AS3 / IMCR4AS3 */
+ { FRC, 0, 0, 0,
+ LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } },
+ __IGNORE({ 0xE6950194, 0xE69501D4, 8, /* IMR5AS3 / IMCR5AS3 */
+ {SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+ SCUV, 0, 0, 0 } })
+ { 0xE6950198, 0xE69501D8, 8, /* IMR6AS3 / IMCR6AS3 */
+ { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, TSIF2,
+ CMT4, 0, 0, 0 } },
+ { 0xE695019C, 0xE69501DC, 8, /* IMR7AS3 / IMCR7AS3 */
+ { __IGNORE0(MFIS2), CPORTS2R, 0, 0,
+ 0, 0, 0, 0 } },
+ { 0xFFD20104, 0, 16, /* INTAMASK */
+ { 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, INTCS } }
+};
+
+static struct intc_prio_reg intcs_prio_registers[] __initdata = {
+ /* IPRAS */
+ { 0xFFD20000, 0, 16, 4, { __IGNORE0(CTI), MVI3, _2DDMAC, ICB } },
+ /* IPRBS */
+ { 0xFFD20004, 0, 16, 4, { JPU, LCDC0, 0, __IGNORE0(LCRC) } },
+ /* IPRCS */
+ __IGNORE({ 0xFFD20008, 0, 16, 4, { BBIF2, 0, 0, 0 } })
+ /* IPRES */
+ { 0xFFD20010, 0, 16, 4, { RTDMAC1_1, CEU, __IGNORE0(MFI), VPU } },
+ /* IPRFS */
+ { 0xFFD20014, 0, 16, 4,
+ { __IGNORE0(KEYSC), RTDMAC1_2, __IGNORE0(CMT2), CMT0 } },
+ /* IPRGS */
+ { 0xFFD20018, 0, 16, 4, { TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, TSIF1 } },
+ /* IPRHS */
+ { 0xFFD2001C, 0, 16, 4, { __IGNORE0(TTI20), 0, VEU, BEU } },
+ /* IPRIS */
+ { 0xFFD20020, 0, 16, 4, { 0, __IGNORE0(MSIOF), TSIF0, IIC0 } },
+ /* IPRJS */
+ __IGNORE({ 0xFFD20024, 0, 16, 4, { 0, SGX540, MSUG, MSU } })
+ /* IPRKS */
+ { 0xFFD20028, 0, 16, 4, { __IGNORE0(_2DG), ASA, LMB, PEP } },
+ /* IPRLS */
+ { 0xFFD2002C, 0, 16, 4, { IPMMU, 0, 0, HQE } },
+ /* IPRMS */
+ { 0xFFD20030, 0, 16, 4,
+ { IIC2, 0, __IGNORE0(RWDT1), __IGNORE0(RWDT0) } },
+ /* IPRAS3 */
+ { 0xFFD50000, 0, 16, 4, { RTDMAC2_1, 0, 0, 0 } },
+ /* IPRBS3 */
+ { 0xFFD50004, 0, 16, 4, { RTDMAC2_2, 0, 0, 0 } },
+ /* IPRIS3 */
+ { 0xFFD50020, 0, 16, 4, { FRC, 0, 0, 0 } },
+ /* IPRJS3 */
+ { 0xFFD50024, 0, 16, 4, { LCDC1, CSIRX, DSITX, 0 } },
+ /* IPRKS3 */
+ __IGNORE({ 0xFFD50028, 0, 16, 4, { SPU2, 0, FSI, FMSI } })
+ /* IPRLS3 */
+ __IGNORE({ 0xFFD5002C, 0, 16, 4, { SCUV, 0, 0, 0 } })
+ /* IPRMS3 */
+ { 0xFFD50030, 0, 16, 4, { TMU1, 0, 0, TSIF2 } },
+ /* IPRNS3 */
+ { 0xFFD50034, 0, 16, 4, { CMT4, 0, 0, 0 } },
+ /* IPROS3 */
+ { 0xFFD50038, 0, 16, 4, { __IGNORE0(MFIS2), CPORTS2R, 0, 0 } },
+};
+
+static struct resource intcs_resources[] __initdata = {
+ [0] = {
+ .start = 0xffd20000,
+ .end = 0xffd500ff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct intc_desc intcs_desc __initdata = {
+ .name = "sh7377-intcs",
+ .resource = intcs_resources,
+ .num_resources = ARRAY_SIZE(intcs_resources),
+ .hw = INTC_HW_DESC(intcs_vectors, intcs_groups,
+ intcs_mask_registers, intcs_prio_registers,
+ NULL, NULL),
+};
+
+static void intcs_demux(unsigned int irq, struct irq_desc *desc)
+{
+ void __iomem *reg = (void *)get_irq_data(irq);
+ unsigned int evtcodeas = ioread32(reg);
+
+ generic_handle_irq(intcs_evt2irq(evtcodeas));
+}
+
+#define INTEVTSA 0xFFD20100
void __init sh7377_init_irq(void)
{
+ void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE);
+
register_intc_controller(&intca_desc);
+ register_intc_controller(&intcs_desc);
+
+ /* demux using INTEVTSA */
+ set_irq_data(evt2irq(INTCS_INTVECT), (void *)intevtsa);
+ set_irq_chained_handler(evt2irq(INTCS_INTVECT), intcs_demux);
}
GPIO_FN(LCDD18), GPIO_FN(LCDD19), GPIO_FN(LCDD20),
GPIO_FN(LCDD21), GPIO_FN(LCDD22), GPIO_FN(LCDD23),
+ GPIO_FN(LCDC0_SELECT),
+ GPIO_FN(LCDC1_SELECT),
+
/* IRDA */
GPIO_FN(IRDA_OUT), GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL),
GPIO_FN(IROUT_139), GPIO_FN(IROUT_140),
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+/* SCIFA0 */
static struct plat_sci_port scif0_platform_data = {
.mapbase = 0xe6c40000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 80, 80, 80, 80 },
+ .irqs = { evt2irq(0xc00), evt2irq(0xc00),
+ evt2irq(0xc00), evt2irq(0xc00) },
};
static struct platform_device scif0_device = {
},
};
+/* SCIFA1 */
static struct plat_sci_port scif1_platform_data = {
.mapbase = 0xe6c50000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 81, 81, 81, 81 },
+ .irqs = { evt2irq(0xc20), evt2irq(0xc20),
+ evt2irq(0xc20), evt2irq(0xc20) },
};
static struct platform_device scif1_device = {
},
};
+/* SCIFA2 */
static struct plat_sci_port scif2_platform_data = {
.mapbase = 0xe6c60000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 82, 82, 82, 82 },
+ .irqs = { evt2irq(0xc40), evt2irq(0xc40),
+ evt2irq(0xc40), evt2irq(0xc40) },
};
static struct platform_device scif2_device = {
},
};
+/* SCIFA3 */
static struct plat_sci_port scif3_platform_data = {
.mapbase = 0xe6c70000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 83, 83, 83, 83 },
+ .irqs = { evt2irq(0xc60), evt2irq(0xc60),
+ evt2irq(0xc60), evt2irq(0xc60) },
};
static struct platform_device scif3_device = {
},
};
+/* SCIFA4 */
static struct plat_sci_port scif4_platform_data = {
.mapbase = 0xe6c80000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 89, 89, 89, 89 },
+ .irqs = { evt2irq(0xd20), evt2irq(0xd20),
+ evt2irq(0xd20), evt2irq(0xd20) },
};
static struct platform_device scif4_device = {
},
};
+/* SCIFA5 */
static struct plat_sci_port scif5_platform_data = {
.mapbase = 0xe6cb0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 90, 90, 90, 90 },
+ .irqs = { evt2irq(0xd40), evt2irq(0xd40),
+ evt2irq(0xd40), evt2irq(0xd40) },
};
static struct platform_device scif5_device = {
},
};
+/* SCIFB */
static struct plat_sci_port scif6_platform_data = {
.mapbase = 0xe6c30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 91, 91, 91, 91 },
+ .irqs = { evt2irq(0xd60), evt2irq(0xd60),
+ evt2irq(0xd60), evt2irq(0xd60) },
};
static struct platform_device scif6_device = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 72,
+ .start = evt2irq(0xb00), /* CMT1_CMT10 */
.flags = IORESOURCE_IRQ,
},
};
#include <linux/input.h>
#include <linux/io.h>
#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
#include <linux/sh_intc.h>
#include <linux/sh_timer.h>
#include <mach/hardware.h>
+#include <mach/sh7372.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+/* SCIFA0 */
static struct plat_sci_port scif0_platform_data = {
.mapbase = 0xe6c40000,
.flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCIF,
- .irqs = { 80, 80, 80, 80 },
+ .type = PORT_SCIFA,
+ .irqs = { evt2irq(0x0c00), evt2irq(0x0c00),
+ evt2irq(0x0c00), evt2irq(0x0c00) },
};
static struct platform_device scif0_device = {
},
};
+/* SCIFA1 */
static struct plat_sci_port scif1_platform_data = {
.mapbase = 0xe6c50000,
.flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCIF,
- .irqs = { 81, 81, 81, 81 },
+ .type = PORT_SCIFA,
+ .irqs = { evt2irq(0x0c20), evt2irq(0x0c20),
+ evt2irq(0x0c20), evt2irq(0x0c20) },
};
static struct platform_device scif1_device = {
},
};
+/* SCIFA2 */
static struct plat_sci_port scif2_platform_data = {
.mapbase = 0xe6c60000,
.flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCIF,
- .irqs = { 82, 82, 82, 82 },
+ .type = PORT_SCIFA,
+ .irqs = { evt2irq(0x0c40), evt2irq(0x0c40),
+ evt2irq(0x0c40), evt2irq(0x0c40) },
};
static struct platform_device scif2_device = {
},
};
+/* SCIFA3 */
static struct plat_sci_port scif3_platform_data = {
.mapbase = 0xe6c70000,
.flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCIF,
- .irqs = { 83, 83, 83, 83 },
+ .type = PORT_SCIFA,
+ .irqs = { evt2irq(0x0c60), evt2irq(0x0c60),
+ evt2irq(0x0c60), evt2irq(0x0c60) },
};
static struct platform_device scif3_device = {
},
};
+/* SCIFA4 */
static struct plat_sci_port scif4_platform_data = {
.mapbase = 0xe6c80000,
.flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCIF,
- .irqs = { 89, 89, 89, 89 },
+ .type = PORT_SCIFA,
+ .irqs = { evt2irq(0x0d20), evt2irq(0x0d20),
+ evt2irq(0x0d20), evt2irq(0x0d20) },
};
static struct platform_device scif4_device = {
},
};
+/* SCIFA5 */
static struct plat_sci_port scif5_platform_data = {
.mapbase = 0xe6cb0000,
.flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCIF,
- .irqs = { 90, 90, 90, 90 },
+ .type = PORT_SCIFA,
+ .irqs = { evt2irq(0x0d40), evt2irq(0x0d40),
+ evt2irq(0x0d40), evt2irq(0x0d40) },
};
static struct platform_device scif5_device = {
},
};
+/* SCIFB */
static struct plat_sci_port scif6_platform_data = {
.mapbase = 0xe6c30000,
.flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCIF,
- .irqs = { 91, 91, 91, 91 },
+ .type = PORT_SCIFB,
+ .irqs = { evt2irq(0x0d60), evt2irq(0x0d60),
+ evt2irq(0x0d60), evt2irq(0x0d60) },
};
static struct platform_device scif6_device = {
},
};
+/* CMT */
static struct sh_timer_config cmt10_platform_data = {
.name = "CMT10",
.channel_offset = 0x10,
.timer_bit = 0,
- .clk = "r_clk",
+ .clk = "cmt1",
.clockevent_rating = 125,
.clocksource_rating = 125,
};
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 72,
+ .start = evt2irq(0x0b00), /* CMT1_CMT10 */
.flags = IORESOURCE_IRQ,
},
};
.num_resources = ARRAY_SIZE(cmt10_resources),
};
+/* I2C */
+static struct resource iic0_resources[] = {
+ [0] = {
+ .name = "IIC0",
+ .start = 0xFFF20000,
+ .end = 0xFFF20425 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0xe00), /* IIC0_ALI0 */
+ .end = intcs_evt2irq(0xe60), /* IIC0_DTEI0 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device iic0_device = {
+ .name = "i2c-sh_mobile",
+ .id = 0, /* "i2c0" clock */
+ .num_resources = ARRAY_SIZE(iic0_resources),
+ .resource = iic0_resources,
+};
+
+static struct resource iic1_resources[] = {
+ [0] = {
+ .name = "IIC1",
+ .start = 0xE6C20000,
+ .end = 0xE6C20425 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x780), /* IIC1_ALI1 */
+ .end = evt2irq(0x7e0), /* IIC1_DTEI1 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device iic1_device = {
+ .name = "i2c-sh_mobile",
+ .id = 1, /* "i2c1" clock */
+ .num_resources = ARRAY_SIZE(iic1_resources),
+ .resource = iic1_resources,
+};
+
+/* DMA */
+/* Transmit sizes and respective CHCR register values */
+enum {
+ XMIT_SZ_8BIT = 0,
+ XMIT_SZ_16BIT = 1,
+ XMIT_SZ_32BIT = 2,
+ XMIT_SZ_64BIT = 7,
+ XMIT_SZ_128BIT = 3,
+ XMIT_SZ_256BIT = 4,
+ XMIT_SZ_512BIT = 5,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+#define TS_SHIFT { \
+ [XMIT_SZ_8BIT] = 0, \
+ [XMIT_SZ_16BIT] = 1, \
+ [XMIT_SZ_32BIT] = 2, \
+ [XMIT_SZ_64BIT] = 3, \
+ [XMIT_SZ_128BIT] = 4, \
+ [XMIT_SZ_256BIT] = 5, \
+ [XMIT_SZ_512BIT] = 6, \
+}
+
+#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | \
+ (((i) & 0xc) << (20 - 2)))
+
+static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_SCIF0_TX,
+ .addr = 0xe6c40020,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x21,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF0_RX,
+ .addr = 0xe6c40024,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x22,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF1_TX,
+ .addr = 0xe6c50020,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x25,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF1_RX,
+ .addr = 0xe6c50024,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x26,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF2_TX,
+ .addr = 0xe6c60020,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x29,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF2_RX,
+ .addr = 0xe6c60024,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x2a,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF3_TX,
+ .addr = 0xe6c70020,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x2d,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF3_RX,
+ .addr = 0xe6c70024,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x2e,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF4_TX,
+ .addr = 0xe6c80020,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x39,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF4_RX,
+ .addr = 0xe6c80024,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x3a,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF5_TX,
+ .addr = 0xe6cb0020,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x35,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF5_RX,
+ .addr = 0xe6cb0024,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x36,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF6_TX,
+ .addr = 0xe6c30040,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x3d,
+ }, {
+ .slave_id = SHDMA_SLAVE_SCIF6_RX,
+ .addr = 0xe6c30060,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .mid_rid = 0x3e,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI0_TX,
+ .addr = 0xe6850030,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .mid_rid = 0xc1,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI0_RX,
+ .addr = 0xe6850030,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .mid_rid = 0xc2,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI1_TX,
+ .addr = 0xe6860030,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .mid_rid = 0xc9,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI1_RX,
+ .addr = 0xe6860030,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .mid_rid = 0xca,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI2_TX,
+ .addr = 0xe6870030,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .mid_rid = 0xcd,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI2_RX,
+ .addr = 0xe6870030,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .mid_rid = 0xce,
+ },
+};
+
+static const struct sh_dmae_channel sh7372_dmae_channels[] = {
+ {
+ .offset = 0,
+ .dmars = 0,
+ .dmars_bit = 0,
+ }, {
+ .offset = 0x10,
+ .dmars = 0,
+ .dmars_bit = 8,
+ }, {
+ .offset = 0x20,
+ .dmars = 4,
+ .dmars_bit = 0,
+ }, {
+ .offset = 0x30,
+ .dmars = 4,
+ .dmars_bit = 8,
+ }, {
+ .offset = 0x50,
+ .dmars = 8,
+ .dmars_bit = 0,
+ }, {
+ .offset = 0x60,
+ .dmars = 8,
+ .dmars_bit = 8,
+ }
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma_platform_data = {
+ .slave = sh7372_dmae_slaves,
+ .slave_num = ARRAY_SIZE(sh7372_dmae_slaves),
+ .channel = sh7372_dmae_channels,
+ .channel_num = ARRAY_SIZE(sh7372_dmae_channels),
+ .ts_low_shift = 3,
+ .ts_low_mask = 0x18,
+ .ts_high_shift = (20 - 2), /* 2 bits for shifted low TS */
+ .ts_high_mask = 0x00300000,
+ .ts_shift = ts_shift,
+ .ts_shift_num = ARRAY_SIZE(ts_shift),
+ .dmaor_init = DMAOR_DME,
+};
+
+/* Resource order important! */
+static struct resource sh7372_dmae0_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xfe008020,
+ .end = 0xfe00808f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* DMARSx */
+ .start = 0xfe009000,
+ .end = 0xfe00900b,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* DMA error IRQ */
+ .start = 246,
+ .end = 246,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ /* IRQ for channels 0-5 */
+ .start = 240,
+ .end = 245,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* Resource order important! */
+static struct resource sh7372_dmae1_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xfe018020,
+ .end = 0xfe01808f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* DMARSx */
+ .start = 0xfe019000,
+ .end = 0xfe01900b,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* DMA error IRQ */
+ .start = 254,
+ .end = 254,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ /* IRQ for channels 0-5 */
+ .start = 248,
+ .end = 253,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* Resource order important! */
+static struct resource sh7372_dmae2_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xfe028020,
+ .end = 0xfe02808f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* DMARSx */
+ .start = 0xfe029000,
+ .end = 0xfe02900b,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* DMA error IRQ */
+ .start = 262,
+ .end = 262,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ /* IRQ for channels 0-5 */
+ .start = 256,
+ .end = 261,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dma0_device = {
+ .name = "sh-dma-engine",
+ .id = 0,
+ .resource = sh7372_dmae0_resources,
+ .num_resources = ARRAY_SIZE(sh7372_dmae0_resources),
+ .dev = {
+ .platform_data = &dma_platform_data,
+ },
+};
+
+static struct platform_device dma1_device = {
+ .name = "sh-dma-engine",
+ .id = 1,
+ .resource = sh7372_dmae1_resources,
+ .num_resources = ARRAY_SIZE(sh7372_dmae1_resources),
+ .dev = {
+ .platform_data = &dma_platform_data,
+ },
+};
+
+static struct platform_device dma2_device = {
+ .name = "sh-dma-engine",
+ .id = 2,
+ .resource = sh7372_dmae2_resources,
+ .num_resources = ARRAY_SIZE(sh7372_dmae2_resources),
+ .dev = {
+ .platform_data = &dma_platform_data,
+ },
+};
+
static struct platform_device *sh7372_early_devices[] __initdata = {
&scif0_device,
&scif1_device,
&scif5_device,
&scif6_device,
&cmt10_device,
+ &iic0_device,
+ &iic1_device,
+ &dma0_device,
+ &dma1_device,
+ &dma2_device,
};
void __init sh7372_add_standard_devices(void)
ARRAY_SIZE(sh7372_early_devices));
}
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR3_CMT1 (1 << 29)
-
void __init sh7372_add_early_devices(void)
{
- /* enable clock to CMT1 */
- __raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
-
early_platform_add_devices(sh7372_early_devices,
ARRAY_SIZE(sh7372_early_devices));
}
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+/* SCIFA0 */
static struct plat_sci_port scif0_platform_data = {
.mapbase = 0xe6c40000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 80, 80, 80, 80 },
+ .irqs = { evt2irq(0xc00), evt2irq(0xc00),
+ evt2irq(0xc00), evt2irq(0xc00) },
};
static struct platform_device scif0_device = {
},
};
+/* SCIFA1 */
static struct plat_sci_port scif1_platform_data = {
.mapbase = 0xe6c50000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 81, 81, 81, 81 },
+ .irqs = { evt2irq(0xc20), evt2irq(0xc20),
+ evt2irq(0xc20), evt2irq(0xc20) },
};
static struct platform_device scif1_device = {
},
};
+/* SCIFA2 */
static struct plat_sci_port scif2_platform_data = {
.mapbase = 0xe6c60000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 82, 82, 82, 82 },
+ .irqs = { evt2irq(0xc40), evt2irq(0xc40),
+ evt2irq(0xc40), evt2irq(0xc40) },
};
static struct platform_device scif2_device = {
},
};
+/* SCIFA3 */
static struct plat_sci_port scif3_platform_data = {
.mapbase = 0xe6c70000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 83, 83, 83, 83 },
+ .irqs = { evt2irq(0xc60), evt2irq(0xc60),
+ evt2irq(0xc60), evt2irq(0xc60) },
};
static struct platform_device scif3_device = {
},
};
+/* SCIFA4 */
static struct plat_sci_port scif4_platform_data = {
.mapbase = 0xe6c80000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 89, 89, 89, 89 },
+ .irqs = { evt2irq(0xd20), evt2irq(0xd20),
+ evt2irq(0xd20), evt2irq(0xd20) },
};
static struct platform_device scif4_device = {
},
};
+/* SCIFA5 */
static struct plat_sci_port scif5_platform_data = {
.mapbase = 0xe6cb0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 90, 90, 90, 90 },
+ .irqs = { evt2irq(0xd40), evt2irq(0xd40),
+ evt2irq(0xd40), evt2irq(0xd40) },
};
static struct platform_device scif5_device = {
},
};
+/* SCIFA6 */
static struct plat_sci_port scif6_platform_data = {
.mapbase = 0xe6cc0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 196, 196, 196, 196 },
+ .irqs = { intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80),
+ intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80) },
};
static struct platform_device scif6_device = {
},
};
+/* SCIFB */
static struct plat_sci_port scif7_platform_data = {
.mapbase = 0xe6c30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 91, 91, 91, 91 },
+ .irqs = { evt2irq(0xd60), evt2irq(0xd60),
+ evt2irq(0xd60), evt2irq(0xd60) },
};
static struct platform_device scif7_device = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 72,
+ .start = evt2irq(0xb00), /* CMT1_CMT10 */
.flags = IORESOURCE_IRQ,
},
};
.lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
};
+/*
+ * The MMCI apb_pclk is hardwired to the same terminal as the
+ * external MCI clock. Thus this will be referenced twice.
+ */
static struct clk mmcsd_clk = {
.name = "MCLK",
.parent = &fast_clk,
.lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
};
+/*
+ * The SPI apb_pclk is hardwired to the same terminal as the
+ * external SPI clock. Thus this will be referenced twice.
+ */
static struct clk spi_clk = {
.name = "SPI",
.parent = &fast_clk,
};
#ifdef CONFIG_MACH_U300_BS335
-static struct clk uart1_clk = {
- .name = "UART1",
+static struct clk uart1_pclk = {
+ .name = "UART1_PCLK",
.parent = &fast_clk,
- .rate = 13000000,
.hw_ctrld = false,
.reset = true,
.res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
.clk_val = U300_SYSCON_SBCER_UART1_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock),
+};
+
+/* This one is hardwired to PLL13 */
+static struct clk uart1_clk = {
+ .name = "UART1_CLK",
+ .rate = 13000000,
+ .hw_ctrld = true,
.lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
};
#endif
.lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
};
-/* This one is hardwired to PLL13 */
-static struct clk uart_clk = {
- .name = "UARTCLK",
+static struct clk uart0_pclk = {
+ .name = "UART0_PCLK",
.parent = &slow_clk,
- .rate = 13000000,
.hw_ctrld = false,
.reset = true,
.res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
.clk_val = U300_SYSCON_SBCER_UART_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
+ .lock = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock),
+};
+
+/* This one is hardwired to PLL13 */
+static struct clk uart0_clk = {
+ .name = "UART0_CLK",
+ .parent = &slow_clk,
+ .rate = 13000000,
+ .hw_ctrld = true,
+ .lock = __SPIN_LOCK_UNLOCKED(uart0_clk.lock),
};
static struct clk keypad_clk = {
.lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
};
+/*
+ * There is a binary divider in the hardware that divides
+ * the 13MHz PLL by 13 down to 1 MHz.
+ */
static struct clk app_timer_clk = {
.name = "TIMER_APP",
.parent = &slow_clk,
- .rate = 13000000,
+ .rate = 1000000,
.hw_ctrld = true,
.reset = true,
.res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
};
#endif
-static struct clk dummy_apb_pclk;
-
#define DEF_LOOKUP(devid, clkref) \
{ \
.dev_id = devid, \
.clk = clkref, \
}
+#define DEF_LOOKUP_CON(devid, conid, clkref) \
+ { \
+ .dev_id = devid, \
+ .con_id = conid, \
+ .clk = clkref, \
+ }
+
/*
* Here we only define clocks that are meaningful to
* look up through clockdevice.
*/
static struct clk_lookup lookups[] = {
- {
- .con_id = "apb_pclk",
- .clk = &dummy_apb_pclk,
- },
/* Connected directly to the AMBA bus */
DEF_LOOKUP("amba", &amba_clk),
DEF_LOOKUP("cpu", &cpu_clk),
/* AHB bridge clocks */
DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
DEF_LOOKUP("intcon", &intcon_clk),
+ DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk),
DEF_LOOKUP("mspro", &mspro_clk),
DEF_LOOKUP("pl172", &emif_clk),
+ DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk),
/* FAST bridge clocks */
DEF_LOOKUP("fast", &fast_clk),
DEF_LOOKUP("mmci", &mmcsd_clk),
+ DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk),
/*
* The .0 and .1 identifiers on these comes from the platform device
* .id field and are assigned when the platform devices are registered.
DEF_LOOKUP("stu300.0", &i2c0_clk),
DEF_LOOKUP("stu300.1", &i2c1_clk),
DEF_LOOKUP("pl022", &spi_clk),
+ DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk),
#ifdef CONFIG_MACH_U300_BS335
DEF_LOOKUP("uart1", &uart1_clk),
+ DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk),
#endif
/* SLOW bridge clocks */
DEF_LOOKUP("slow", &slow_clk),
DEF_LOOKUP("coh901327_wdog", &wdog_clk),
- DEF_LOOKUP("uart0", &uart_clk),
+ DEF_LOOKUP("uart0", &uart0_clk),
+ DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk),
DEF_LOOKUP("apptimer", &app_timer_clk),
DEF_LOOKUP("coh901461-keypad", &keypad_clk),
DEF_LOOKUP("u300-gpio", &gpio_clk),
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
}
-/*
- * These are the clocks for cells registered as primecell drivers
- * on the AMBA bus. These must be on during AMBA device registration
- * since the bus probe will attempt to read magic configuration
- * registers for these devices. If they are deactivated these probes
- * will fail.
- *
- *
- * Please note that on emif, both RAM and NAND is connected in dual
- * RAM phones. On single RAM phones, ram is on semi and NAND on emif.
- *
- */
-void u300_clock_primecells(void)
-{
- clk_enable(&intcon_clk);
- clk_enable(&uart_clk);
-#ifdef CONFIG_MACH_U300_BS335
- clk_enable(&uart1_clk);
-#endif
- clk_enable(&spi_clk);
-
- clk_enable(&mmcsd_clk);
-
-}
-EXPORT_SYMBOL(u300_clock_primecells);
-
-void u300_unclock_primecells(void)
-{
-
- clk_disable(&intcon_clk);
- clk_disable(&uart_clk);
-#ifdef CONFIG_MACH_U300_BS335
- clk_disable(&uart1_clk);
-#endif
- clk_disable(&spi_clk);
- clk_disable(&mmcsd_clk);
-
-}
-EXPORT_SYMBOL(u300_unclock_primecells);
-
-/*
- * The interrupt controller is enabled before the clock API is registered.
- */
-void u300_enable_intcon_clock(void)
-{
- clk_enable(&intcon_clk);
-}
-EXPORT_SYMBOL(u300_enable_intcon_clock);
-
-/*
- * The timer is enabled before the clock API is registered.
- */
-void u300_enable_timer_clock(void)
-{
- clk_enable(&app_timer_clk);
-}
-EXPORT_SYMBOL(u300_enable_timer_clock);
-
#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
/*
* The following makes it possible to view the status (especially
&spi_clk,
#ifdef CONFIG_MACH_U300_BS335
&uart1_clk,
+ &uart1_pclk,
#endif
/* SLOW bridge clocks */
&slow_clk,
&wdog_clk,
- &uart_clk,
+ &uart0_clk,
+ &uart0_pclk,
&app_timer_clk,
&keypad_clk,
&gpio_clk,
chars++;
}
cdp[32] = '\0';
- if (clk->get_rate)
+ if (clk->get_rate || clk->rate != 0)
seq_printf(s,
"%s%s\t%s\t%d\t%s\t%lu Hz\n",
&cdp[0],
clk->usecount ? "ON" : "OFF",
clk->usecount,
clk->hw_ctrld ? "YES" : "NO ",
- clk->get_rate(clk));
+ clk_get_rate(clk));
else
seq_printf(s,
"%s%s\t%s\t%d\t%s\t" \
module_init(init_clk_read_debugfs);
#endif
-static int __init u300_clock_init(void)
+int __init u300_clock_init(void)
{
u16 val;
*/
syscon_block_reset_disable(&semi_clk);
syscon_block_reset_disable(&emif_clk);
- semi_clk.enable(&semi_clk);
- emif_clk.enable(&emif_clk);
+ clk_enable(&semi_clk);
+ clk_enable(&emif_clk);
return 0;
}
-/* initialize clocking early to be available later in the boot */
-core_initcall(u300_clock_init);
void (*disable) (struct clk *);
};
-void u300_clock_primecells(void);
-void u300_unclock_primecells(void);
-void u300_enable_intcon_clock(void);
-void u300_enable_timer_clock(void);
+int u300_clock_init(void);
#endif
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <mach/coh901318.h>
#include <asm/types.h>
void __init u300_init_irq(void)
{
u32 mask[2] = {0, 0};
+ struct clk *clk;
int i;
+ /* initialize clocking early, we want to clock the INTCON */
+ u300_clock_init();
+
+ /* Clock the interrupt controller */
+ clk = clk_get_sys("intcon", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_enable(clk);
+
for (i = 0; i < NR_IRQS; i++)
set_bit(i, (unsigned long *) &mask[0]);
- u300_enable_intcon_clock();
vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
}
u300_spi_init(&pl022_device);
/* Register the AMBA devices in the AMBA bus abstraction layer */
- u300_clock_primecells();
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
- u300_unclock_primecells();
u300_assign_physmem();
mdelay(20);
- mmci_card->mmc_inserted = !!gpio_get_value(U300_GPIO_PIN_MMC_CD);
+ mmci_card->mmc_inserted = !gpio_get_value(U300_GPIO_PIN_MMC_CD);
input_report_switch(mmci_card->mmc_input, KEY_INSERT,
- !mmci_card->mmc_inserted);
+ mmci_card->mmc_inserted);
input_sync(mmci_card->mmc_input);
pr_debug("MMC/SD card was %s\n",
- mmci_card->mmc_inserted ? "removed" : "inserted");
+ mmci_card->mmc_inserted ? "inserted" : "removed");
- enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, !mmci_card->mmc_inserted);
+ enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, mmci_card->mmc_inserted);
}
int __devinit mmc_init(struct amba_device *adev)
#include <linux/clocksource.h>
#include <linux/types.h>
#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include "clock.h"
+/* Be able to sleep for atleast 4 seconds (usually more) */
+#define APPTIMER_MIN_RANGE 4
/*
* APP side special timer registers
.name = "GPT1",
.rating = 300, /* Reasonably fast and accurate clock event */
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- /* 22 calculated using the algorithm in arch/mips/kernel/time.c */
- .shift = 22,
.set_next_event = u300_set_next_event,
.set_mode = u300_set_mode,
};
.rating = 300, /* Reasonably fast and accurate clock source */
.read = u300_get_cycles,
.mask = CLOCKSOURCE_MASK(32), /* 32 bits */
- /* 22 calculated using the algorithm in arch/mips/kernel/time.c */
- .shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
*/
static void __init u300_timer_init(void)
{
- u300_enable_timer_clock();
+ struct clk *clk;
+ unsigned long rate;
+
+ /* Clock the interrupt controller */
+ clk = clk_get_sys("apptimer", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_enable(clk);
+ rate = clk_get_rate(clk);
+
/*
* Disable the "OS" and "DD" timers - these are designed for Symbian!
* Example usage in cnh1601578 cpu subsystem pd_timer_app.c
writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
- /* This is a pure microsecond clock source */
- clocksource_u300_1mhz.mult =
- clocksource_khz2mult(1000, clocksource_u300_1mhz.shift);
+ clocksource_calc_mult_shift(&clocksource_u300_1mhz,
+ rate, APPTIMER_MIN_RANGE);
if (clocksource_register(&clocksource_u300_1mhz))
printk(KERN_ERR "timer: failed to initialize clock "
"source %s\n", clocksource_u300_1mhz.name);
- clockevent_u300_1mhz.mult =
- div_sc(1000000, NSEC_PER_SEC, clockevent_u300_1mhz.shift);
+ clockevents_calc_mult_shift(&clockevent_u300_1mhz,
+ rate, APPTIMER_MIN_RANGE);
/* 32bit counter, so 32bits delta is max */
clockevent_u300_1mhz.max_delta_ns =
clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
-#if 0
-#define VERSATILE_PCI_VIRT_MEM_BASE0 0xf4000000
-#define VERSATILE_PCI_VIRT_MEM_BASE1 0xf5000000
-#define VERSATILE_PCI_VIRT_MEM_BASE2 0xf6000000
-
-#define PCIO_BASE VERSATILE_PCI_VIRT_MEM_BASE0
-#define PCIMEM_BASE VERSATILE_PCI_VIRT_MEM_BASE1
-#endif
-
/* CIK guesswork */
#define PCIBIOS_MIN_IO 0x44000000
#define PCIBIOS_MIN_MEM 0x50000000
--- /dev/null
+#ifndef __ASM_ARCH_NUC900_I2C_H
+#define __ASM_ARCH_NUC900_I2C_H
+
+struct nuc900_platform_i2c {
+ int bus_num;
+ unsigned long bus_freq;
+};
+
+#endif /* __ASM_ARCH_NUC900_I2C_H */
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
- ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
- ARCH_TEGRA
+ ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \
+ ARCH_U8500 || ARCH_VEXPRESS_CA9X4
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
#ifndef __ASM_ARCH_MXC_GPIO_H__
#define __ASM_ARCH_MXC_GPIO_H__
+#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <asm-generic/gpio.h>
/* Call back after enabling / disabling regulators */
void (*after_set_reg)(struct device *dev, int slot,
int power_on, int vdd);
+ /* if we have special card, init it using this callback */
+ void (*init_card)(struct mmc_card *card);
/* return MMC cover switch state, can be NULL if not supported.
*
obj-y := dma.o
-obj-$(CONFIG_ARCH_PXA) += pmu.o
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
+++ /dev/null
-/*
- * PMU IRQ registration for the PXA xscale PMU families.
- * Copyright (C) 2010 Will Deacon, ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/pmu.h>
-#include <mach/irqs.h>
-
-static struct resource pmu_resource = {
- .start = IRQ_PMU,
- .end = IRQ_PMU,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
- .name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
- .resource = &pmu_resource,
- .num_resources = 1,
-};
-
-static int __init pxa_pmu_init(void)
-{
- platform_device_register(&pmu_device);
- return 0;
-}
-arch_initcall(pxa_pmu_init);
config PLAT_S5P
bool
- depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210)
+ depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310)
default y
- select ARM_VIC
+ select ARM_VIC if !ARCH_S5PV310
+ select ARM_GIC if ARCH_S5PV310
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
help
Use the external interrupts (other than GPIO interrupts.)
Note: Do not choose this for S5P6440.
+
+config S5P_DEV_FIMC0
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 0
+
+config S5P_DEV_FIMC1
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 1
+
+config S5P_DEV_FIMC2
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 2
# Core files
+obj-y += dev-pmu.o
obj-y += dev-uart.o
obj-y += cpu.o
obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
+# devices
+
+obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o
+obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o
+obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o
#include <plat/s5p6442.h>
#include <plat/s5pc100.h>
#include <plat/s5pv210.h>
+#include <plat/s5pv310.h>
/* table of supported CPUs */
static const char name_s5p6442[] = "S5P6442";
static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
+static const char name_s5pv310[] = "S5PV310";
static struct cpu_table cpu_ids[] __initdata = {
{
.init_uarts = s5pv210_init_uarts,
.init = s5pv210_init,
.name = name_s5pv210,
+ }, {
+ .idcode = 0x43200000,
+ .idmask = 0xfffff000,
+ .map_io = s5pv310_map_io,
+ .init_clocks = s5pv310_init_clocks,
+ .init_uarts = s5pv310_init_uarts,
+ .init = s5pv310_init,
+ .name = name_s5pv310,
},
};
}, {
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_4K,
+ .length = SZ_512K,
.type = MT_DEVICE,
+#ifdef CONFIG_ARM_VIC
}, {
.virtual = (unsigned long)VA_VIC0,
.pfn = __phys_to_pfn(S5P_PA_VIC0),
.pfn = __phys_to_pfn(S5P_PA_VIC1),
.length = SZ_16K,
.type = MT_DEVICE,
+#endif
}, {
.virtual = (unsigned long)S3C_VA_TIMER,
.pfn = __phys_to_pfn(S5P_PA_TIMER),
.pfn = __phys_to_pfn(S5P_PA_GPIO),
.length = SZ_4K,
.type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S3C_PA_WDT),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
},
};
--- /dev/null
+/* linux/arch/arm/plat-s5p/dev-fimc0.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC0 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc0_resource[] = {
+ [0] = {
+ .start = S5P_PA_FIMC0,
+ .end = S5P_PA_FIMC0 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FIMC0,
+ .end = IRQ_FIMC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_fimc0 = {
+ .name = "s5p-fimc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p_fimc0_resource),
+ .resource = s5p_fimc0_resource,
+};
--- /dev/null
+/* linux/arch/arm/plat-s5p/dev-fimc1.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC1 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc1_resource[] = {
+ [0] = {
+ .start = S5P_PA_FIMC1,
+ .end = S5P_PA_FIMC1 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FIMC1,
+ .end = IRQ_FIMC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_fimc1 = {
+ .name = "s5p-fimc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5p_fimc1_resource),
+ .resource = s5p_fimc1_resource,
+};
--- /dev/null
+/* linux/arch/arm/plat-s5p/dev-fimc2.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC2 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc2_resource[] = {
+ [0] = {
+ .start = S5P_PA_FIMC2,
+ .end = S5P_PA_FIMC2 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FIMC2,
+ .end = IRQ_FIMC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_fimc2 = {
+ .name = "s5p-fimc",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5p_fimc2_resource),
+ .resource = s5p_fimc2_resource,
+};
--- /dev/null
+/*
+ * linux/arch/arm/plat-s5p/dev-pmu.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/pmu.h>
+#include <mach/irqs.h>
+
+static struct resource s5p_pmu_resource = {
+ .start = IRQ_PMU,
+ .end = IRQ_PMU,
+ .flags = IORESOURCE_IRQ,
+};
+
+struct platform_device s5p_device_pmu = {
+ .name = "arm-pmu",
+ .id = ARM_PMU_DEVICE_CPU,
+ .num_resources = 1,
+ .resource = &s5p_pmu_resource,
+};
+
+static int __init s5p_pmu_init(void)
+{
+ platform_device_register(&s5p_device_pmu);
+ return 0;
+}
+arch_initcall(s5p_pmu_init);
#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000)
#define S5P_VA_SROMC S3C_ADDR(0x01100000)
-#define S5P_VA_UART0 (S3C_VA_UART + 0x0)
-#define S5P_VA_UART1 (S3C_VA_UART + 0x400)
-#define S5P_VA_UART2 (S3C_VA_UART + 0x800)
-#define S5P_VA_UART3 (S3C_VA_UART + 0xC00)
+#define S5P_VA_COMBINER_BASE S3C_ADDR(0x00600000)
+#define S5P_VA_COMBINER(x) (S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
+#define S5P_VA_COREPERI_BASE S3C_ADDR(0x00800000)
+#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))
+#define S5P_VA_SCU S5P_VA_COREPERI(0x0)
+#define S5P_VA_GIC_CPU S5P_VA_COREPERI(0x100)
+#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
+#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000)
+
+#define S5P_VA_L2CC S3C_ADDR(0x00900000)
+
+#define S5P_VA_UART(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_VA_UART0 S5P_VA_UART(0)
+#define S5P_VA_UART1 S5P_VA_UART(1)
+#define S5P_VA_UART2 S5P_VA_UART(2)
+#define S5P_VA_UART3 S5P_VA_UART(3)
+
+#ifndef S3C_UART_OFFSET
#define S3C_UART_OFFSET (0x400)
+#endif
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
return (unsigned long)fvco;
}
+#define PLL46XX_KDIV_MASK (0xFFFF)
+#define PLL46XX_MDIV_MASK (0x1FF)
+#define PLL46XX_PDIV_MASK (0x3F)
+#define PLL46XX_SDIV_MASK (0x7)
+#define PLL46XX_MDIV_SHIFT (16)
+#define PLL46XX_PDIV_SHIFT (8)
+#define PLL46XX_SDIV_SHIFT (0)
+
+enum pll46xx_type_t {
+ pll_4600,
+ pll_4650,
+};
+
+static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
+ u32 pll_con0, u32 pll_con1,
+ enum pll46xx_type_t pll_type)
+{
+ unsigned long result;
+ u32 mdiv, pdiv, sdiv, kdiv;
+ u64 tmp;
+
+ mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
+ kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+ tmp = baseclk;
+
+ if (pll_type == pll_4600) {
+ tmp *= (mdiv << 16) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 16;
+ } else {
+ tmp *= (mdiv << 10) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 10;
+ }
+
+ return result;
+}
+
#define PLL90XX_MDIV_MASK (0xFF)
#define PLL90XX_PDIV_MASK (0x3F)
#define PLL90XX_SDIV_MASK (0x7)
--- /dev/null
+/* linux/arch/arm/plat-s5p/include/plat/reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_RESET_H
+#define __ASM_PLAT_S5P_RESET_H __FILE__
+
+extern void (*s5p_reset_hook)(void);
+
+#endif /* __ASM_PLAT_S5P_RESET_H */
--- /dev/null
+/* linux/arch/arm/plat-s5p/include/plat/s5pv310.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5pv310 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PV310 related SoCs */
+
+extern void s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pv310_register_clocks(void);
+extern void s5pv310_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PV310
+
+extern int s5pv310_init(void);
+extern void s5pv310_init_irq(void);
+extern void s5pv310_map_io(void);
+extern void s5pv310_init_clocks(int xtal);
+extern struct sys_timer s5pv310_timer;
+
+#define s5pv310_init_uarts s5pv310_common_init_uarts
+
+#else
+#define s5pv310_init_clocks NULL
+#define s5pv310_init_uarts NULL
+#define s5pv310_map_io NULL
+#define s5pv310_init NULL
+#endif
--- /dev/null
+/* linux/arch/arm/plat-s5p/include/plat/system-reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
+ *
+ * S5P - System define for arch_reset()
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/watchdog-reset.h>
+
+void (*s5p_reset_hook)(void);
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* SWRESET support in s5p_reset_hook() */
+
+ if (s5p_reset_hook)
+ s5p_reset_hook();
+
+ /* Perform reset using Watchdog reset
+ * if there is no s5p_reset_hook()
+ */
+
+ arch_wdt_reset();
+}
void __init s5p_init_irq(u32 *vic, u32 num_vic)
{
+#ifdef CONFIG_ARM_VIC
int irq;
/* initialize the VICs */
for (irq = 0; irq < num_vic; irq++)
vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
+#endif
s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
config PLAT_SAMSUNG
bool
- depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
+ depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
select NO_IOPORT
default y
help
help
Compile in platform device definitions for HSMMC channel 2
+config S3C_DEV_HSMMC3
+ bool
+ help
+ Compile in platform device definitions for HSMMC channel 3
+
config S3C_DEV_HWMON
bool
help
help
Compile in platform device definition for ADC controller
+config SAMSUNG_DEV_IDE
+ bool
+ help
+ Compile in platform device definitions for IDE
+
config S3C64XX_DEV_SPI
bool
help
help
Common in platform device definitions for touchscreen device
+config SAMSUNG_DEV_KEYPAD
+ bool
+ help
+ Compile in platform device definitions for keypad
+
# DMA
config S3C_DMA
# Objects we always build independent of SoC choice
obj-y += init.o
-obj-y += time.o
+obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-y += clock.o
obj-y += pwm-clock.o
obj-y += gpio.o
# devices
+obj-y += platformdata.o
+
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
+obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o
obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o
+obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o
obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o
+obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o
# DMA support
struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
set->max_width = pd->max_width;
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
set->max_width = pd->max_width;
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
set->max_width = pd->max_width;
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
--- /dev/null
+/* linux/arch/arm/plat-samsung/dev-hsmmc3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Based on arch/arm/plat-samsung/dev-hsmmc1.c
+ *
+ * Samsung device definition for hsmmc device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+
+#define S3C_SZ_HSMMC (0x1000)
+
+static struct resource s3c_hsmmc3_resource[] = {
+ [0] = {
+ .start = S3C_PA_HSMMC3,
+ .end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MMC3,
+ .end = IRQ_MMC3,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc3 = {
+ .name = "s3c-sdhci",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource),
+ .resource = s3c_hsmmc3_resource,
+ .dev = {
+ .dma_mask = &s3c_device_hsmmc3_dmamask,
+ .coherent_dma_mask = 0xffffffffUL,
+ .platform_data = &s3c_hsmmc3_def_platdata,
+ },
+};
+
+void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
+
+ set->max_width = pd->max_width;
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+ if (pd->cfg_gpio)
+ set->cfg_gpio = pd->cfg_gpio;
+ if (pd->cfg_card)
+ set->cfg_card = pd->cfg_card;
+}
--- /dev/null
+/* linux/arch/arm/plat-samsung/dev-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CF-ATA device definition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/ata.h>
+#include <plat/devs.h>
+
+static struct resource s3c_cfcon_resource[] = {
+ [0] = {
+ .start = SAMSUNG_PA_CFCON,
+ .end = SAMSUNG_PA_CFCON + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_CFCON,
+ .end = IRQ_CFCON,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_cfcon = {
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_cfcon_resource),
+ .resource = s3c_cfcon_resource,
+};
+
+void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+{
+ s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
+ &s3c_device_cfcon);
+}
--- /dev/null
+/*
+ * linux/arch/arm/plat-samsung/dev-keypad.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/keypad.h>
+
+static struct resource samsung_keypad_resources[] = {
+ [0] = {
+ .start = SAMSUNG_PA_KEYPAD,
+ .end = SAMSUNG_PA_KEYPAD + 0x20 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KEYPAD,
+ .end = IRQ_KEYPAD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device samsung_device_keypad = {
+ .name = "samsung-keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(samsung_keypad_resources),
+ .resource = samsung_keypad_resources,
+};
+
+void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
+{
+ struct samsung_keypad_platdata *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
+ &samsung_device_keypad);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = samsung_keypad_cfg_gpio;
+}
static struct resource s3c_wdt_resource[] = {
[0] = {
.start = S3C_PA_WDT,
- .end = S3C_PA_WDT + SZ_1M - 1,
+ .end = S3C_PA_WDT + SZ_1K,
.flags = IORESOURCE_MEM,
},
[1] = {
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <mach/gpio.h>
+#include <linux/gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/adc-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Samsung ADC Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_CORE_H
+#define __ASM_PLAT_ADC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_adc_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_ADC
+ s3c_device_adc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ADC_CORE_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/ata-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CF-ATA Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_CORE_H
+#define __ASM_PLAT_ATA_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+*/
+
+/* re-define device name depending on support. */
+static inline void s3c_cfcon_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+ s3c_device_cfcon.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ATA_CORE_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CF-ATA platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_H
+#define __ASM_PLAT_ATA_H __FILE__
+
+/**
+ * struct s3c_ide_platdata - S3C IDE driver platform data.
+ * @setup_gpio: Setup the external GPIO pins to the right state for data
+ * transfer in true-ide mode.
+ */
+struct s3c_ide_platdata {
+ void (*setup_gpio)(void);
+};
+
+/*
+ * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
+ * @pdata: Platform data for IDE driver.
+ */
+extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
+
+/* architecture-specific IDE configuration */
+extern void s3c64xx_ide_setup_gpio(void);
+extern void s5pc100_ide_setup_gpio(void);
+extern void s5pv210_ide_setup_gpio(void);
+
+#endif /*__ASM_PLAT_ATA_H */
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
extern struct platform_device s3c_device_hsmmc2;
+extern struct platform_device s3c_device_hsmmc3;
+extern struct platform_device s3c_device_cfcon;
extern struct platform_device s3c_device_spi0;
extern struct platform_device s3c_device_spi1;
extern struct platform_device s5pc100_device_iis1;
extern struct platform_device s5pc100_device_iis2;
+extern struct platform_device samsung_device_keypad;
+
+extern struct platform_device s5p_device_fimc0;
+extern struct platform_device s5p_device_fimc1;
+extern struct platform_device s5p_device_fimc2;
+
/* s3c2440 specific devices */
#ifdef CONFIG_CPU_S3C2440
extern struct platform_device s3c_device_ac97;
#endif
+
+/**
+ * s3c_set_platdata() - helper for setting platform data
+ * @pd: The default platform data for this device.
+ * @pdsize: The size of the platform data.
+ * @pdev: Pointer to the device to fill in.
+ *
+ * This helper replaces a number of calls that copy and then set the
+ * platform data of the device.
+ */
+extern void *s3c_set_platdata(void *pd, size_t pdsize,
+ struct platform_device *pdev);
--- /dev/null
+/*
+ * arch/arm/plat-samsung/include/plat/fb-core.h
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ * Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Samsung framebuffer driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PLAT_FB_CORE_H
+#define __ASM_PLAT_FB_CORE_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name depending on support. */
+static inline void s3c_fb_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_FB
+ s3c_device_fb.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_FB_CORE_H */
* @setup_gpio: Setup the external GPIO pins to the right state to transfer
* the data from the display system to the connected display
* device.
+ * @default_win: default window layer number to be used for UI layer.
* @vidcon0: The base vidcon0 values to control the panel data format.
* @vidcon1: The base vidcon1 values to control the panel data output.
* @win: The setup data for each hardware window, or NULL for unused.
struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN];
+ u32 default_win;
+
u32 vidcon0;
u32 vidcon1;
};
--- /dev/null
+/*
+ * arch/arm/plat-samsung/include/plat/fimc-core.h
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Samsung camera interface driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_FIMC_CORE_H
+#define __ASM_PLAT_FIMC_CORE_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s3c_fimc_setname(int id, char *name)
+{
+ switch (id) {
+#ifdef CONFIG_S5P_DEV_FIMC0
+ case 0:
+ s5p_device_fimc0.name = name;
+ break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC1
+ case 1:
+ s5p_device_fimc1.name = name;
+ break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC2
+ case 2:
+ s5p_device_fimc2.name = name;
+ break;
+#endif
+ }
+}
+
+#endif /* __ASM_PLAT_FIMC_CORE_H */
--- /dev/null
+/*
+ * linux/arch/arm/plat-samsung/include/plat/keypad-core.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Samsung keypad controller core function
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_KEYPAD_CORE_H
+#define __ASM_ARCH_KEYPAD_CORE_H
+
+/* These function are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void samsung_keypad_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
+ samsung_device_keypad.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_KEYPAD_CORE_H */
void (*cfg_gpio)(unsigned int rows, unsigned int cols);
};
+/**
+ * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with Samsung Keypad device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
+
+/* defined by architecture to configure gpio. */
+extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
+
#endif /* __PLAT_SAMSUNG_KEYPAD_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/regs-ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CF-ATA register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_REGS_ATA_H
+#define __ASM_PLAT_REGS_ATA_H __FILE__
+
+#define S3C_CFATA_REG(x) (x)
+
+#define S3C_CFATA_MUX S3C_CFATA_REG(0x0)
+
+#define S3C_ATA_CTRL S3C_CFATA_REG(0x0)
+#define S3C_ATA_STATUS S3C_CFATA_REG(0x4)
+#define S3C_ATA_CMD S3C_CFATA_REG(0x8)
+#define S3C_ATA_SWRST S3C_CFATA_REG(0xc)
+#define S3C_ATA_IRQ S3C_CFATA_REG(0x10)
+#define S3C_ATA_IRQ_MSK S3C_CFATA_REG(0x14)
+#define S3C_ATA_CFG S3C_CFATA_REG(0x18)
+
+#define S3C_ATA_MDMA_TIME S3C_CFATA_REG(0x28)
+#define S3C_ATA_PIO_TIME S3C_CFATA_REG(0x2c)
+#define S3C_ATA_UDMA_TIME S3C_CFATA_REG(0x30)
+#define S3C_ATA_XFR_NUM S3C_CFATA_REG(0x34)
+#define S3C_ATA_XFR_CNT S3C_CFATA_REG(0x38)
+#define S3C_ATA_TBUF_START S3C_CFATA_REG(0x3c)
+#define S3C_ATA_TBUF_SIZE S3C_CFATA_REG(0x40)
+#define S3C_ATA_SBUF_START S3C_CFATA_REG(0x44)
+#define S3C_ATA_SBUF_SIZE S3C_CFATA_REG(0x48)
+#define S3C_ATA_CADR_TBUF S3C_CFATA_REG(0x4c)
+#define S3C_ATA_CADR_SBUF S3C_CFATA_REG(0x50)
+#define S3C_ATA_PIO_DTR S3C_CFATA_REG(0x54)
+#define S3C_ATA_PIO_FED S3C_CFATA_REG(0x58)
+#define S3C_ATA_PIO_SCR S3C_CFATA_REG(0x5c)
+#define S3C_ATA_PIO_LLR S3C_CFATA_REG(0x60)
+#define S3C_ATA_PIO_LMR S3C_CFATA_REG(0x64)
+#define S3C_ATA_PIO_LHR S3C_CFATA_REG(0x68)
+#define S3C_ATA_PIO_DVR S3C_CFATA_REG(0x6c)
+#define S3C_ATA_PIO_CSD S3C_CFATA_REG(0x70)
+#define S3C_ATA_PIO_DAD S3C_CFATA_REG(0x74)
+#define S3C_ATA_PIO_READY S3C_CFATA_REG(0x78)
+#define S3C_ATA_PIO_RDATA S3C_CFATA_REG(0x7c)
+
+#define S3C_CFATA_MUX_TRUEIDE 0x01
+
+#define S3C_ATA_CFG_SWAP 0x40
+#define S3C_ATA_CFG_IORDYEN 0x02
+
+#endif /* __ASM_PLAT_REGS_ATA_H */
/* OSD1 and OSD4 do not have register D */
-#define VIDOSD_A(_win) (0x40 + ((_win) * 16))
-#define VIDOSD_B(_win) (0x44 + ((_win) * 16))
-#define VIDOSD_C(_win) (0x48 + ((_win) * 16))
-#define VIDOSD_D(_win) (0x4C + ((_win) * 16))
-
+#define VIDOSD_BASE (0x40)
#define VIDINTCON0 (0x130)
-#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4))
-
/* WINCONx */
#define WINCONx_CSCWIDTH_MASK (0x3 << 26)
#define WPALCON_W2PAL_16BPP_A555 (1 << 6)
-/* system specific implementation code for palette sizes, and other
- * information that changes depending on which architecture is being
- * compiled.
-*/
-
-/* return true if window _win has OSD register D */
-#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
-
-static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
-{
- if (win < 2)
- return 256;
- if (win < 4)
- return 16;
- if (win == 4)
- return 4;
-
- BUG(); /* shouldn't get here */
-}
-
-static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
-{
- /* all windows can do 1/2 bpp */
-
- if ((bpp == 25 || bpp == 19) && win == 0)
- return 0; /* win 0 does not have 19 or 25bpp modes */
-
- if (bpp == 4 && win == 4)
- return 0;
-
- if (bpp == 8 && (win >= 3))
- return 0; /* win 3/4 cannot do 8bpp in any mode */
-
- return 1;
-}
-
-static inline int s3c_fb_pal_is16(unsigned int window)
-{
- return window > 1;
-}
-
-struct s3c_fb_palette {
- struct fb_bitfield r;
- struct fb_bitfield g;
- struct fb_bitfield b;
- struct fb_bitfield a;
-};
-
-static inline void s3c_fb_init_palette(unsigned int window,
- struct s3c_fb_palette *palette)
-{
- if (window < 2) {
- /* Windows 0/1 are 8/8/8 or A/8/8/8 */
- palette->r.offset = 16;
- palette->r.length = 8;
- palette->g.offset = 8;
- palette->g.length = 8;
- palette->b.offset = 0;
- palette->b.length = 8;
- } else {
- /* currently we assume RGB 5/6/5 */
- palette->r.offset = 11;
- palette->r.length = 5;
- palette->g.offset = 5;
- palette->g.length = 6;
- palette->b.offset = 0;
- palette->b.length = 5;
- }
-}
-
/* Notes on per-window bpp settings
*
* Value Win0 Win1 Win2 Win3 Win 4
#define VIDCON2_ORGYCbCr (1 << 8)
#define VIDCON2_YUVORDCrCb (1 << 7)
+/* PRTCON (S3C6410, S5PC100)
+ * Might not be present in the S3C6410 documentation,
+ * but tests prove it's there almost for sure; shouldn't hurt in any case.
+ */
+#define PRTCON (0x0c)
+#define PRTCON_PROTECT (1 << 11)
+
/* VIDTCON0 */
#define VIDTCON0_VBPDE_MASK (0xff << 24)
#define WINCONx_BITSWP (1 << 18)
#define WINCONx_BYTSWP (1 << 17)
#define WINCONx_HAWSWP (1 << 16)
+#define WINCONx_WSWP (1 << 15)
#define WINCONx_BURSTLEN_MASK (0x3 << 9)
#define WINCONx_BURSTLEN_SHIFT (9)
#define WINCONx_BURSTLEN_16WORD (0x0 << 9)
#define WINCON1_BPPMODE_25BPP_A1888 (0xd << 2)
#define WINCON1_BPPMODE_28BPP_A4888 (0xd << 2)
+/* S5PV210 */
+#define SHADOWCON (0x34)
+#define SHADOWCON_WINx_PROTECT(_win) (1 << (10 + (_win)))
+/* DMA channels (all windows) */
+#define SHADOWCON_CHx_ENABLE(_win) (1 << (_win))
+/* Local input channels (windows 0-2) */
+#define SHADOWCON_CHx_LOCAL_ENABLE(_win) (1 << (5 + (_win)))
#define VIDOSDxA_TOPLEFT_X_MASK (0x7ff << 11)
#define VIDOSDxA_TOPLEFT_X_SHIFT (11)
#define VIDINTCON0_FRAMESEL0_ACTIVE (0x2 << 15)
#define VIDINTCON0_FRAMESEL0_FRONTPORCH (0x3 << 15)
-#define VIDINTCON0_FRAMESEL1 (1 << 14)
-#define VIDINTCON0_FRAMESEL1_NONE (0x0 << 14)
-#define VIDINTCON0_FRAMESEL1_BACKPORCH (0x1 << 14)
-#define VIDINTCON0_FRAMESEL1_VSYNC (0x2 << 14)
-#define VIDINTCON0_FRAMESEL1_FRONTPORCH (0x3 << 14)
+#define VIDINTCON0_FRAMESEL1 (1 << 13)
+#define VIDINTCON0_FRAMESEL1_MASK (0x3 << 13)
+#define VIDINTCON0_FRAMESEL1_NONE (0x0 << 13)
+#define VIDINTCON0_FRAMESEL1_BACKPORCH (0x1 << 13)
+#define VIDINTCON0_FRAMESEL1_VSYNC (0x2 << 13)
+#define VIDINTCON0_FRAMESEL1_FRONTPORCH (0x3 << 13)
#define VIDINTCON0_INT_FRAME (1 << 12)
#define VIDINTCON0_FIFIOSEL_MASK (0x7f << 5)
#define VIDINTCON1_INT_FIFO (1 << 0)
/* Window colour-key control registers */
+#define WKEYCON (0x140) /* 6410,V210 */
+
+#define WKEYCON0 (0x00)
+#define WKEYCON1 (0x04)
#define WxKEYCON0_KEYBL_EN (1 << 26)
#define WxKEYCON0_KEYEN_F (1 << 25)
#define __ASM_ARCH_REGS_RTC_H __FILE__
#define S3C2410_RTCREG(x) (x)
+#define S3C2410_INTP S3C2410_RTCREG(0x30)
+#define S3C2410_INTP_ALM (1 << 1)
+#define S3C2410_INTP_TIC (1 << 0)
#define S3C2410_RTCCON S3C2410_RTCREG(0x40)
#define S3C2410_RTCCON_RTCEN (1<<0)
unsigned short flags;
upf_t uart_flags; /* default uart flags */
+ unsigned int has_fracval;
+
unsigned long ucon; /* value of ucon for port */
unsigned long ulcon; /* value of ulcon for port */
unsigned long ufcon; /* value of ufcon for port */
#define S3C_DIEPMSK S3C_HSOTG_REG(0x810)
+#define S3C_DIEPMSK_TxFIFOEmpty (1 << 7)
#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6)
#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5)
#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4)
#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
+#define S3C_DTXFSTS(_a) S3C_HSOTG_REG(0x918 + ((_a) * 0x20))
#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
struct mmc_card;
struct mmc_ios;
+enum cd_types {
+ S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
+ S3C_SDHCI_CD_EXTERNAL, /* use external callback */
+ S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
+ S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
+ S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
+};
+
/**
* struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
* @max_width: The maximum number of data bits supported.
* @host_caps: Standard MMC host capabilities bit field.
+ * @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @ext_cd_init: Initialize external card detect subsystem. Called on
+ * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is a callback to the sdhci-s3c driver
+ * that triggers the card detection event. Callback arguments:
+ * dev is pointer to platform device of the host controller,
+ * state is new state of the card (0 - removed, 1 - inserted).
+ * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
+ * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is the same callback as for ext_cd_init.
+ * @ext_cd_gpio: gpio pin used for external CD line, valid only if
+ * cd_type == S3C_SDHCI_CD_GPIO
+ * @ext_cd_gpio_invert: invert values for external CD gpio line
* @cfg_gpio: Configure the GPIO for a specific card bit-width
* @cfg_card: Configure the interface for a specific card and speed. This
* is necessary the controllers and/or GPIO blocks require the
struct s3c_sdhci_platdata {
unsigned int max_width;
unsigned int host_caps;
+ enum cd_types cd_type;
char **clocks; /* set of clock sources */
+ int ext_cd_gpio;
+ bool ext_cd_gpio_invert;
+ int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
+ int state));
+ int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
+ int state));
+
void (*cfg_gpio)(struct platform_device *dev, int width);
void (*cfg_card)(struct platform_device *dev,
void __iomem *regbase,
extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
/* Default platform data, exported so that per-cpu initialisation can
* set the correct one when there are more than one cpu type selected.
extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
/* Helper function availablity */
extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
-/* S3C6400 SDHCI setup */
+/* S3C64XX SDHCI setup */
#ifdef CONFIG_S3C64XX_SETUP_SDHCI
extern char *s3c64xx_hsmmc_clksrcs[4];
-#ifdef CONFIG_S3C_DEV_HSMMC
extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
static inline void s3c6400_default_sdhci0(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s3c6400_default_sdhci1(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6400_default_sdhci2(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6400_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-/* S3C6410 SDHCI setup */
extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
struct mmc_card *card);
-#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s3c6410_default_sdhci0(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s3c6410_default_sdhci1(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6410_default_sdhci2(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6410_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
#else
static inline void s3c6410_default_sdhci0(void) { }
struct mmc_ios *ios,
struct mmc_card *card);
-#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s5pc100_default_sdhci0(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
}
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s5pc100_default_sdhci1(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
}
-#else
-static inline void s5pc100_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s5pc100_default_sdhci2(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
}
-#else
-static inline void s5pc100_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
#else
static inline void s5pc100_default_sdhci0(void) { }
static inline void s5pc100_default_sdhci1(void) { }
static inline void s5pc100_default_sdhci2(void) { }
+
#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+/* S5PV210 SDHCI setup */
-/* S5PC110 SDHCI setup */
#ifdef CONFIG_S5PV210_SETUP_SDHCI
extern char *s5pv210_hsmmc_clksrcs[4];
struct mmc_ios *ios,
struct mmc_card *card);
-#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s5pv210_default_sdhci0(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s5pv210_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s5pv210_default_sdhci1(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s5pv210_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s5pv210_default_sdhci2(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv210_default_sdhci3(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC3
+ s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+ s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
+ s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s5pv210_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
#else
static inline void s5pv210_default_sdhci0(void) { }
static inline void s5pv210_default_sdhci1(void) { }
static inline void s5pv210_default_sdhci2(void) { }
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
-
-
+static inline void s5pv210_default_sdhci3(void) { }
+#endif /* CONFIG_S5PV210_SETUP_SDHCI */
#endif /* __PLAT_S3C_SDHCI_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/platformdata.c
+ *
+ * Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
+ *
+ * Helper for platform data setting
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+void __init *s3c_set_platdata(void *pd, size_t pdsize,
+ struct platform_device *pdev)
+{
+ void *npd;
+
+ if (!pd) {
+ /* too early to use dev_name(), may not be registered */
+ printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
+ return NULL;
+ }
+
+ npd = kmemdup(pd, pdsize, GFP_KERNEL);
+ if (!npd) {
+ printk(KERN_ERR "%s: cannot clone platform data\n", pdev->name);
+ return NULL;
+ }
+
+ pdev->dev.platform_data = npd;
+ return npd;
+}
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 29 09:39:22 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
CONFIG_BOARD_ATNGW100_MKI=y
-# CONFIG_BOARD_ATNGW100_MKII is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
-# CONFIG_BOARD_ATSTK1003 is not set
-# CONFIG_BOARD_ATSTK1004 is not set
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-CONFIG_BOARD_ATNGW100_ADDON_NONE=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
-# CONFIG_BOARD_ATNGW100_MRMT is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 29 09:36:39 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
CONFIG_BOARD_ATNGW100_MKI=y
-# CONFIG_BOARD_ATNGW100_MKII is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
-# CONFIG_BOARD_ATSTK1003 is not set
-# CONFIG_BOARD_ATSTK1004 is not set
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
CONFIG_BOARD_ATNGW100_EVKLCD10X=y
-# CONFIG_BOARD_ATNGW100_MRMT is not set
CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA is not set
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_ATMEL is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_HRTIMER=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
CONFIG_SND_ATMEL_AC97C=m
# CONFIG_SND_SPI is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=350
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 29 09:37:19 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
CONFIG_BOARD_ATNGW100_MKI=y
-# CONFIG_BOARD_ATNGW100_MKII is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
CONFIG_BOARD_ATNGW100_EVKLCD10X=y
-# CONFIG_BOARD_ATNGW100_MRMT is not set
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA is not set
-CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_ATMEL is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_HRTIMER=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
CONFIG_SND_ATMEL_AC97C=m
# CONFIG_SND_SPI is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=350
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Jun 3 00:24:53 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type and features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-# CONFIG_BOARD_ATSTK1000 is not set
-CONFIG_BOARD_ATNGW100=y
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
-# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
-CONFIG_BOARD_ATNGW100_MRMT=y
-CONFIG_BOARD_MRMT_REV1=y
-# CONFIG_BOARD_MRMT_REV2 is not set
-CONFIG_BOARD_MRMT_AC97=y
-# CONFIG_BOARD_MRMT_UCB1400_TS is not set
-CONFIG_BOARD_MRMT_ADS7846_TS=y
-# CONFIG_BOARD_MRMT_LCD_DISABLE is not set
-CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X=y
-# CONFIG_BOARD_MRMT_LCD_KWH043GM08 is not set
-CONFIG_BOARD_MRMT_BL_PWM=y
-CONFIG_BOARD_MRMT_RTC_I2C=y
-CONFIG_BOARD_MRMT_WIRELESS_ZB=y
-# CONFIG_BOARD_MRMT_WIRELESS_BT is not set
-# CONFIG_BOARD_MRMT_WIRELESS_NONE is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_NMI_DEBUGGING is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_BNEP is not set
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_PWM=y
-# CONFIG_ATMEL_TCLIB is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
-# CONFIG_BACKLIGHT_ATMEL_PWM is not set
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
CONFIG_SND_ATMEL_AC97C=m
# CONFIG_SND_SPI is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_APPLE is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=m
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_ATMEL_PWM=y
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_S35390A=m
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=m
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 15:32:26 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100_MKI is not set
CONFIG_BOARD_ATNGW100_MKII=y
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATNGW100_MKII_LCD is not set
-CONFIG_BOARD_ATNGW100_ADDON_NONE=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
-# CONFIG_BOARD_ATNGW100_MRMT is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 15:33:09 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100_MKI is not set
CONFIG_BOARD_ATNGW100_MKII=y
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
CONFIG_BOARD_ATNGW100_MKII_LCD=y
-# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
CONFIG_BOARD_ATNGW100_EVKLCD10X=y
-# CONFIG_BOARD_ATNGW100_MRMT is not set
CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA is not set
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_ATMEL is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_HRTIMER=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
CONFIG_SND_ATMEL_AC97C=m
# CONFIG_SND_SPI is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=350
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 15:33:32 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100_MKI is not set
CONFIG_BOARD_ATNGW100_MKII=y
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
CONFIG_BOARD_ATNGW100_MKII_LCD=y
-# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
CONFIG_BOARD_ATNGW100_EVKLCD10X=y
-# CONFIG_BOARD_ATNGW100_MRMT is not set
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA is not set
-CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_ATMEL is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_HRTIMER=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
CONFIG_SND_ATMEL_AC97C=m
# CONFIG_SND_SPI is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=350
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 29 13:00:55 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100_MKI is not set
-# CONFIG_BOARD_ATNGW100_MKII is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-CONFIG_BOARD_ATSTK1002=y
-# CONFIG_BOARD_ATSTK1003 is not set
-# CONFIG_BOARD_ATSTK1004 is not set
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=m
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=m
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-CONFIG_SND_SPI=y
CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
CONFIG_LEDS_ATMEL_PWM=m
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 15:34:44 2008
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
-# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7001=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
CONFIG_BOARD_ATSTK1003=y
-# CONFIG_BOARD_ATSTK1004 is not set
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
+CONFIG_EEPROM_AT24=m
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_SOUND=m
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_SPI=y
CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_ATMEL_PWM=m
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 15:38:56 2008
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type and features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7002=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
-# CONFIG_BOARD_ATSTK1003 is not set
CONFIG_BOARD_ATSTK1004=y
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_NMI_DEBUGGING is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_SERIAL_ATMEL_PDC is not set
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 29 13:00:25 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100_MKI is not set
-# CONFIG_BOARD_ATNGW100_MKII is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
-# CONFIG_BOARD_ATSTK1003 is not set
-# CONFIG_BOARD_ATSTK1004 is not set
CONFIG_BOARD_ATSTK1006=y
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=m
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=m
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-CONFIG_SND_SPI=y
CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
CONFIG_LEDS_ATMEL_PWM=m
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_XATTR is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Tue Oct 14 13:20:41 2008
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100 is not set
CONFIG_BOARD_FAVR_32=y
-# CONFIG_BOARD_MIMC200 is not set
-CONFIG_BOARD_FAVR32_ABDAC_RATE=44100
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
CONFIG_BACKLIGHT_ATMEL_PWM=m
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=m
-# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_ATMELMCI_DMA=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_ATMEL_PWM=m
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Dec 9 15:37:30 2008
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100 is not set
CONFIG_BOARD_HAMMERHEAD=y
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MIMC200 is not set
CONFIG_BOARD_HAMMERHEAD_USB=y
CONFIG_BOARD_HAMMERHEAD_LCD=y
CONFIG_BOARD_HAMMERHEAD_SND=y
# CONFIG_BOARD_HAMMERHEAD_FPGA is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
# CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_NMI_DEBUGGING is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x80000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AT32PSIF is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_MON=m
CONFIG_USB_ISP116X_HCD=m
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT32AP700X=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc1
-# Wed Mar 25 14:06:15 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100 is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MIMC200 is not set
CONFIG_BOARD_MERISC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
CONFIG_AP700X_32_BIT_SMC=y
-# CONFIG_AP700X_16_BIT_SMC is not set
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
# CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_NMI_DEBUGGING is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
-
-#
-# CAN Device Drivers
-#
-# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_PWM=y
-# CONFIG_ATMEL_TCLIB is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT32AP700X_WDT is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_ATMELMCI_DMA=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_ATMEL_PWM=y
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT32AP700X is not set
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Mon Oct 13 15:46:53 2008
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100 is not set
CONFIG_BOARD_MIMC200=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x80000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS28CM00 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-CONFIG_EEPROM_AT25=y
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
CONFIG_RTC_DRV_DS1390=y
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT32AP700X is not set
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
* cache before the transfer is done, causing old data to be seen by
* the CPU.
*/
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#ifndef __ASSEMBLER__
struct cache_info {
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
-{
- return 1;
-}
-
-static inline int dma_get_cache_alignment(void)
-{
- return boot_cpu_data.dcache.linesz;
-}
-
#endif /* __ASM_AVR32_DMA_MAPPING_H */
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
#endif /* __ASM_AVR32_SCATTERLIST_H */
unsigned long, unsigned long,
struct pt_regs *);
asmlinkage int sys_vfork(struct pt_regs *);
-asmlinkage int sys_execve(char __user *, char __user *__user *,
+asmlinkage int sys_execve(const char __user *, char __user *__user *,
char __user *__user *, struct pt_regs *);
/* kernel/signal.c */
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
0, NULL, NULL);
}
-asmlinkage int sys_execve(char __user *ufilename, char __user *__user *uargv,
- char __user *__user *uenvp, struct pt_regs *regs)
+asmlinkage int sys_execve(const char __user *ufilename,
+ const char __user *const __user *uargv,
+ const char __user *const __user *uenvp,
+ struct pt_regs *regs)
{
int error;
char *filename;
*/
#include <linux/unistd.h>
-int kernel_execve(const char *file, char **argv, char **envp)
+int kernel_execve(const char *file,
+ const char *const *argv,
+ const char *const *envp)
{
register long scno asm("r8") = __NR_execve;
register long sc1 asm("r12") = (long)file;
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34.1
-# Sun Aug 1 22:52:24 2010
-#
-CONFIG_SYMBOL_PREFIX="_"
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
CONFIG_BF518=y
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-CONFIG_BF_REV_0_0=y
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC32M8A2_75=y
-CONFIG_BF51x=y
-CONFIG_BFIN518F_EZBRD=y
-# CONFIG_BFIN518F_TCM is not set
-
-#
-# BF518 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF518_SPORT0_PORTF is not set
-CONFIG_BF518_SPORT0_PORTG=y
-CONFIG_BF518_SPORT0_TSCLK_PG10=y
-# CONFIG_BF518_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF518_UART1_PORTF=y
-# CONFIG_BF518_UART1_PORTG is not set
-
-#
-# Hysteresis/schmitt Trigger Control
-#
-# CONFIG_BFIN_HYSTERESIS_CONTROL is not set
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_PTP_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI0=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-CONFIG_IRQ_SPI0_ERROR=7
-CONFIG_IRQ_SPI1_ERROR=7
-CONFIG_IRQ_RSI_INT0=7
-CONFIG_IRQ_RSI_INT1=7
-CONFIG_IRQ_PWM_TRIP=10
-CONFIG_IRQ_PWM_SYNC=10
-CONFIG_IRQ_PTP_STAT=10
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
# CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
# CONFIG_MEMSET_L1 is not set
# CONFIG_MEMCPY_L1 is not set
-CONFIG_STRCMP_L1=y
-CONFIG_STRNCMP_L1=y
-CONFIG_STRCPY_L1=y
-CONFIG_STRNCPY_L1=y
# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_CACHE_FLUSH_L1=y
-# CONFIG_EXCEPTION_L1_SCRATCH is not set
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_SIR_BFIN_DMA is not set
-# CONFIG_SIR_BFIN_PIO is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_BFIN_MAC=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-CONFIG_BFIN_MAC_USE_HWSTAMP=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
CONFIG_SDH_BFIN=y
CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_TRACEHOOK_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-# CONFIG_BFIN_PSEUDODBG_INSNS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-#
-CONFIG_SYMBOL_PREFIX="_"
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
CONFIG_BF526=y
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-CONFIG_BF_REV_0_0=y
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48H32M16LFCJ_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-CONFIG_BF52x=y
-# CONFIG_BFIN527_EZKIT is not set
-# CONFIG_BFIN527_EZKIT_V2 is not set
-# CONFIG_BFIN527_BLUETECHNIX_CM is not set
CONFIG_BFIN526_EZBRD=y
-# CONFIG_BFIN527_AD7160EVAL is not set
-
-#
-# BF527 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF527_SPORT0_PORTF is not set
-CONFIG_BF527_SPORT0_PORTG=y
-CONFIG_BF527_SPORT0_TSCLK_PG10=y
-# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF527_UART1_PORTF=y
-# CONFIG_BF527_UART1_PORTG is not set
-# CONFIG_BF527_NAND_D_PORTF is not set
-CONFIG_BF527_NAND_D_PORTH=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_SPI=10
-CONFIG_IRQ_SPI_ERROR=7
-CONFIG_IRQ_NFC_ERROR=7
-CONFIG_IRQ_HDMA_ERROR=7
-CONFIG_IRQ_HDMA=7
-CONFIG_IRQ_USB_EINT=10
CONFIG_IRQ_USB_INT0=11
CONFIG_IRQ_USB_INT1=11
CONFIG_IRQ_USB_INT2=11
CONFIG_IRQ_USB_DMA=11
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
# CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
# CONFIG_MEMSET_L1 is not set
# CONFIG_MEMCPY_L1 is not set
-CONFIG_STRCMP_L1=y
-CONFIG_STRNCMP_L1=y
-CONFIG_STRCPY_L1=y
-CONFIG_STRNCPY_L1=y
# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_CACHE_FLUSH_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_BFIN_MAC=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_ADXL34X is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-# CONFIG_SERIAL_BFIN_UART0 is not set
CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_TRACEHOOK_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-# CONFIG_BFIN_PSEUDODBG_INSNS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-#
-CONFIG_SYMBOL_PREFIX="_"
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
CONFIG_BF527=y
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC32M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
-CONFIG_IRQ_TIMER0=8
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-CONFIG_BF52x=y
-# CONFIG_BFIN527_EZKIT is not set
CONFIG_BFIN527_EZKIT_V2=y
-# CONFIG_BFIN527_BLUETECHNIX_CM is not set
-# CONFIG_BFIN526_EZBRD is not set
-# CONFIG_BFIN527_AD7160EVAL is not set
-
-#
-# BF527 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF527_SPORT0_PORTF is not set
-CONFIG_BF527_SPORT0_PORTG=y
-CONFIG_BF527_SPORT0_TSCLK_PG10=y
-# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF527_UART1_PORTF=y
-# CONFIG_BF527_UART1_PORTG is not set
-# CONFIG_BF527_NAND_D_PORTF is not set
-CONFIG_BF527_NAND_D_PORTH=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_SPI=10
-CONFIG_IRQ_SPI_ERROR=7
-CONFIG_IRQ_NFC_ERROR=7
-CONFIG_IRQ_HDMA_ERROR=7
-CONFIG_IRQ_HDMA=7
-CONFIG_IRQ_USB_EINT=10
CONFIG_IRQ_USB_INT0=11
CONFIG_IRQ_USB_INT1=11
CONFIG_IRQ_USB_INT2=11
CONFIG_IRQ_USB_DMA=11
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
# CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
# CONFIG_MEMSET_L1 is not set
# CONFIG_MEMCPY_L1 is not set
-CONFIG_STRCMP_L1=y
-CONFIG_STRNCMP_L1=y
-CONFIG_STRCPY_L1=y
-CONFIG_STRNCPY_L1=y
# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_CACHE_FLUSH_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
CONFIG_BFIN_SIR=m
CONFIG_BFIN_SIR0=y
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_MCS_FIR is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7160 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_ADXL34X is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-# CONFIG_SERIAL_BFIN_UART0 is not set
CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5520 is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_ADP5520=y
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_BFIN_T350MCQB is not set
CONFIG_FB_BFIN_LQ035Q1=y
-# CONFIG_FB_BFIN_7393 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-# CONFIG_BACKLIGHT_ADP5520 is not set
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_BLACKFIN_VGA16 is not set
-CONFIG_LOGO_BLACKFIN_CLUT224=y
CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_BF5XX_I2S=m
CONFIG_SND_BF5XX_SOC_SSM2602=m
-# CONFIG_SND_BF5XX_SOC_AD73311 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set
-# CONFIG_SND_BF5XX_SOC_ADAV80X is not set
-# CONFIG_SND_BF5XX_TDM is not set
CONFIG_SND_BF5XX_AC97=m
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
CONFIG_SND_BF5XX_SOC_AD1980=m
-CONFIG_SND_BF5XX_SOC_SPORT=m
-CONFIG_SND_BF5XX_SOC_I2S=m
-CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SPORT_NUM=0
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=m
-CONFIG_SND_SOC_SSM2602=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_ADP5520=y
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_TRACEHOOK_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-# CONFIG_BFIN_PSEUDODBG_INSNS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-#
-CONFIG_SYMBOL_PREFIX="_"
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
CONFIG_BF527=y
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
CONFIG_BF_REV_0_1=y
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC32M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
-CONFIG_IRQ_TIMER0=8
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-CONFIG_BF52x=y
-CONFIG_BFIN527_EZKIT=y
-# CONFIG_BFIN527_EZKIT_V2 is not set
-# CONFIG_BFIN527_BLUETECHNIX_CM is not set
-# CONFIG_BFIN526_EZBRD is not set
-# CONFIG_BFIN527_AD7160EVAL is not set
-
-#
-# BF527 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF527_SPORT0_PORTF is not set
-CONFIG_BF527_SPORT0_PORTG=y
-CONFIG_BF527_SPORT0_TSCLK_PG10=y
-# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF527_UART1_PORTF=y
-# CONFIG_BF527_UART1_PORTG is not set
-# CONFIG_BF527_NAND_D_PORTF is not set
-CONFIG_BF527_NAND_D_PORTH=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_SPI=10
-CONFIG_IRQ_SPI_ERROR=7
-CONFIG_IRQ_NFC_ERROR=7
-CONFIG_IRQ_HDMA_ERROR=7
-CONFIG_IRQ_HDMA=7
-CONFIG_IRQ_USB_EINT=10
CONFIG_IRQ_USB_INT0=11
CONFIG_IRQ_USB_INT1=11
CONFIG_IRQ_USB_INT2=11
CONFIG_IRQ_USB_DMA=11
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
# CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
# CONFIG_MEMSET_L1 is not set
# CONFIG_MEMCPY_L1 is not set
-CONFIG_STRCMP_L1=y
-CONFIG_STRNCMP_L1=y
-CONFIG_STRCPY_L1=y
-CONFIG_STRNCPY_L1=y
# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_CACHE_FLUSH_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
CONFIG_BFIN_SIR=m
CONFIG_BFIN_SIR0=y
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_MCS_FIR is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_ADXL34X is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-# CONFIG_SERIAL_BFIN_UART0 is not set
CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_BFIN_T350MCQB=y
-# CONFIG_FB_BFIN_LQ035Q1 is not set
-# CONFIG_FB_BFIN_7393 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_BLACKFIN_VGA16 is not set
-CONFIG_LOGO_BLACKFIN_CLUT224=y
CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_BF5XX_I2S=m
CONFIG_SND_BF5XX_SOC_SSM2602=m
-# CONFIG_SND_BF5XX_SOC_AD73311 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set
-# CONFIG_SND_BF5XX_SOC_ADAV80X is not set
-# CONFIG_SND_BF5XX_TDM is not set
CONFIG_SND_BF5XX_AC97=m
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
CONFIG_SND_BF5XX_SOC_AD1980=m
-CONFIG_SND_BF5XX_SOC_SPORT=m
-CONFIG_SND_BF5XX_SOC_I2S=m
-CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SPORT_NUM=0
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=m
-CONFIG_SND_SOC_SSM2602=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_TRACEHOOK_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-# CONFIG_BFIN_PSEUDODBG_INSNS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-#
-CONFIG_SYMBOL_PREFIX="_"
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_FREEZER=y
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-CONFIG_BF533=y
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=6
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
CONFIG_BFIN533_EZKIT=y
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BLACKSTAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_BFIN532_IP0X is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
CONFIG_CLKIN_HZ=27000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=750000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_STRCMP_L1=y
-CONFIG_STRNCMP_L1=y
-CONFIG_STRCPY_L1=y
-CONFIG_STRNCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_CACHE_FLUSH_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0xAAC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
-
-#
-# Possible Suspend Mem / Hibernate Wake-Up Sources
-#
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
-# CONFIG_BFIN_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=y
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_TRACEHOOK_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-# CONFIG_BFIN_PSEUDODBG_INSNS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-#
-CONFIG_SYMBOL_PREFIX="_"
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_FREEZER=y
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-CONFIG_BF533=y
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=6
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC64M4A2FB_7E=y
-# CONFIG_BFIN533_EZKIT is not set
-CONFIG_BFIN533_STAMP=y
-# CONFIG_BLACKSTAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_BFIN532_IP0X is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=11059200
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=750000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_STRCMP_L1=y
-CONFIG_STRNCMP_L1=y
-CONFIG_STRCPY_L1=y
-CONFIG_STRNCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_CACHE_FLUSH_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0xAAC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
-
-#
-# Possible Suspend Mem / Hibernate Wake-Up Sources
-#
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
CONFIG_BFIN_SIR=m
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BFIN_ASYNC=m
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_ADXL34X is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_BFIN_LQ035Q1 is not set
-CONFIG_FB_BFIN_7393=m
-CONFIG_NTSC=y
-# CONFIG_PAL is not set
-# CONFIG_NTSC_640x480 is not set
-# CONFIG_PAL_640x480 is not set
-# CONFIG_NTSC_YCBCR is not set
-# CONFIG_PAL_YCBCR is not set
-CONFIG_ADV7393_1XMEM=y
-# CONFIG_ADV7393_2XMEM is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_BF5XX_I2S=m
-# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
CONFIG_SND_BF5XX_SOC_AD73311=m
-CONFIG_SND_AD7XXXX_SELECT=0
-# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set
-# CONFIG_SND_BF5XX_SOC_ADAV80X is not set
-CONFIG_SND_BFIN_AD73311_SE=4
-# CONFIG_SND_BF5XX_TDM is not set
CONFIG_SND_BF5XX_AC97=m
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
CONFIG_SND_BF5XX_SOC_AD1980=m
-CONFIG_SND_BF5XX_SOC_SPORT=m
-CONFIG_SND_BF5XX_SOC_I2S=m
-CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SPORT_NUM=0
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=m
-CONFIG_SND_SOC_AD73311=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_TRACEHOOK_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-# CONFIG_BFIN_PSEUDODBG_INSNS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-#
-CONFIG_SYMBOL_PREFIX="_"
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_FREEZER=y
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
CONFIG_BF537=y
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=2
-CONFIG_BF_REV_MAX=3
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC32M8A2_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_TIMER0=8
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_SPI=10
-CONFIG_BFIN537_STAMP=y
-# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
-# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_CAMSIG_MINOTAUR is not set
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
CONFIG_IRQ_ERROR=11
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_STRCMP_L1=y
-CONFIG_STRNCMP_L1=y
-CONFIG_STRCPY_L1=y
-CONFIG_STRNCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_CACHE_FLUSH_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
-
-#
-# Possible Suspend Mem / Hibernate Wake-Up Sources
-#
-# CONFIG_PM_BFIN_WAKE_PH6 is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-# CONFIG_CAN_VCAN is not set
CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
-# CONFIG_CAN_MCP251X is not set
CONFIG_CAN_BFIN=m
-# CONFIG_CAN_SJA1000 is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
CONFIG_BFIN_SIR=m
CONFIG_BFIN_SIR1=y
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_ADXL34X is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_BFIN_LQ035Q1 is not set
-CONFIG_FB_BF537_LQ035=m
-CONFIG_FB_BFIN_7393=m
-CONFIG_NTSC=y
-# CONFIG_PAL is not set
-# CONFIG_NTSC_640x480 is not set
-# CONFIG_PAL_640x480 is not set
-# CONFIG_NTSC_YCBCR is not set
-# CONFIG_PAL_YCBCR is not set
-CONFIG_ADV7393_1XMEM=y
-# CONFIG_ADV7393_2XMEM is not set
-# CONFIG_FB_HITACHI_TX09 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_BF5XX_I2S=m
-# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
CONFIG_SND_BF5XX_SOC_AD73311=m
-CONFIG_SND_AD7XXXX_SELECT=0
-# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set
-# CONFIG_SND_BF5XX_SOC_ADAV80X is not set
-CONFIG_SND_BFIN_AD73311_SE=4
-# CONFIG_SND_BF5XX_TDM is not set
CONFIG_SND_BF5XX_AC97=m
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
CONFIG_SND_BF5XX_SOC_AD1980=m
-CONFIG_SND_BF5XX_SOC_SPORT=m
-CONFIG_SND_BF5XX_SOC_I2S=m
-CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SPORT_NUM=0
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=m
-CONFIG_SND_SOC_AD73311=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_TRACEHOOK_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-# CONFIG_BFIN_PSEUDODBG_INSNS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-#
-CONFIG_SYMBOL_PREFIX="_"
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
CONFIG_BF538=y
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=4
-CONFIG_BF_REV_MAX=5
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-CONFIG_BF_REV_0_4=y
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC32M8A2_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_SPI0=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
CONFIG_IRQ_TIMER0=12
CONFIG_IRQ_TIMER1=12
CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=12
-CONFIG_IRQ_PORTF_INTB=12
-CONFIG_IRQ_SPI0_ERROR=7
-CONFIG_IRQ_SPI1_ERROR=7
-CONFIG_IRQ_DMA1_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_BFIN538_EZKIT=y
-
-#
-# BF538 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_MEM0_DMA0=13
-CONFIG_IRQ_MEM0_DMA1=13
-CONFIG_IRQ_SPORT2_ERROR=7
-CONFIG_IRQ_SPORT3_ERROR=7
-CONFIG_IRQ_SPI2_ERROR=7
-CONFIG_IRQ_UART2_ERROR=7
-CONFIG_IRQ_CAN_ERROR=7
-CONFIG_IRQ_SPORT2_RX=9
-CONFIG_IRQ_SPORT2_TX=9
-CONFIG_IRQ_SPORT3_RX=9
-CONFIG_IRQ_SPORT3_TX=9
-CONFIG_IRQ_SPI1=10
-CONFIG_IRQ_SPI2=10
-CONFIG_IRQ_UART2_RX=10
-CONFIG_IRQ_UART2_TX=10
-CONFIG_IRQ_TWI0=11
-CONFIG_IRQ_TWI1=11
-CONFIG_IRQ_MEM1_DMA0=13
-CONFIG_IRQ_MEM1_DMA1=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=533333333
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_STRCMP_L1=y
-CONFIG_STRNCMP_L1=y
-CONFIG_STRCPY_L1=y
-CONFIG_STRNCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_CACHE_FLUSH_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-# CONFIG_CAN_VCAN is not set
CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
-# CONFIG_CAN_MCP251X is not set
CONFIG_CAN_BFIN=m
-# CONFIG_CAN_SJA1000 is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
CONFIG_BFIN_SIR=m
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
CONFIG_TOUCHSCREEN_AD7879=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
CONFIG_TOUCHSCREEN_AD7879_SPI=y
-# CONFIG_TOUCHSCREEN_AD7160 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_ADXL34X is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
CONFIG_SERIAL_BFIN_UART2=y
-# CONFIG_BFIN_UART2_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=m
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_BFIN_T350MCQB is not set
CONFIG_FB_BFIN_LQ035Q1=m
-# CONFIG_FB_BFIN_7393 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_TRACEHOOK_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-# CONFIG_BFIN_PSEUDODBG_INSNS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-#
-CONFIG_SYMBOL_PREFIX="_"
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
CONFIG_BF548_std=y
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_SPI0=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_CNT=8
CONFIG_IRQ_TIMER0=11
-CONFIG_IRQ_TIMER1=11
-CONFIG_IRQ_TIMER2=11
-CONFIG_IRQ_TIMER3=11
-CONFIG_IRQ_TIMER4=11
-CONFIG_IRQ_TIMER5=11
-CONFIG_IRQ_TIMER6=11
-CONFIG_IRQ_TIMER7=11
-CONFIG_IRQ_USB_INT0=11
-CONFIG_IRQ_USB_INT1=11
-CONFIG_IRQ_USB_INT2=11
-CONFIG_IRQ_USB_DMA=11
-CONFIG_IRQ_TIMER8=11
-CONFIG_IRQ_TIMER9=11
-CONFIG_IRQ_TIMER10=11
-CONFIG_IRQ_SPORT2_RX=9
-CONFIG_IRQ_SPORT2_TX=9
-CONFIG_IRQ_SPORT3_RX=9
-CONFIG_IRQ_SPORT3_TX=9
-CONFIG_IRQ_SPI1=10
-CONFIG_IRQ_SPI2=10
-CONFIG_IRQ_TWI0=11
-CONFIG_IRQ_TWI1=11
-CONFIG_BF548=y
-CONFIG_BF54x=y
-CONFIG_BFIN548_EZKIT=y
-# CONFIG_BFIN548_BLUETECHNIX_CM is not set
-
-#
-# BF548 Specific Configuration
-#
-CONFIG_DEB_DMA_URGENT=y
-# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMAC0_ERR=7
-CONFIG_IRQ_EPPI0_ERR=7
-CONFIG_IRQ_SPORT0_ERR=7
-CONFIG_IRQ_SPORT1_ERR=7
-CONFIG_IRQ_SPI0_ERR=7
-CONFIG_IRQ_UART0_ERR=7
-CONFIG_IRQ_EPPI0=8
-CONFIG_IRQ_PINT0=12
-CONFIG_IRQ_PINT1=12
-CONFIG_IRQ_MDMAS0=13
-CONFIG_IRQ_MDMAS1=13
-CONFIG_IRQ_WATCHDOG=13
-CONFIG_IRQ_DMAC1_ERR=7
-CONFIG_IRQ_SPORT2_ERR=7
-CONFIG_IRQ_SPORT3_ERR=7
-CONFIG_IRQ_MXVR_DATA=7
-CONFIG_IRQ_SPI1_ERR=7
-CONFIG_IRQ_SPI2_ERR=7
-CONFIG_IRQ_UART1_ERR=7
-CONFIG_IRQ_UART2_ERR=7
-CONFIG_IRQ_CAN0_ERR=7
-CONFIG_IRQ_EPPI1=9
-CONFIG_IRQ_EPPI2=9
-CONFIG_IRQ_ATAPI_RX=10
-CONFIG_IRQ_ATAPI_TX=10
-CONFIG_IRQ_CAN0_RX=11
-CONFIG_IRQ_CAN0_TX=11
-CONFIG_IRQ_MDMAS2=13
-CONFIG_IRQ_MDMAS3=13
-CONFIG_IRQ_MXVR_ERR=11
-CONFIG_IRQ_MXVR_MSG=11
-CONFIG_IRQ_MXVR_PKT=11
-CONFIG_IRQ_EPPI1_ERR=7
-CONFIG_IRQ_EPPI2_ERR=7
-CONFIG_IRQ_UART3_ERR=7
-CONFIG_IRQ_HOST_ERR=7
-CONFIG_IRQ_PIXC_ERR=7
-CONFIG_IRQ_NFC_ERR=7
-CONFIG_IRQ_ATAPI_ERR=7
-CONFIG_IRQ_CAN1_ERR=7
-CONFIG_IRQ_HS_DMA_ERR=7
-CONFIG_IRQ_PIXC_IN0=8
-CONFIG_IRQ_PIXC_IN1=8
-CONFIG_IRQ_PIXC_OUT=8
-CONFIG_IRQ_SDH=8
-CONFIG_IRQ_KEY=8
-CONFIG_IRQ_CAN1_RX=11
-CONFIG_IRQ_CAN1_TX=11
-CONFIG_IRQ_SDH_MASK0=11
-CONFIG_IRQ_SDH_MASK1=11
-CONFIG_IRQ_OTPSEC=11
-CONFIG_IRQ_PINT2=11
-CONFIG_IRQ_PINT3=11
-
-#
-# Pin Interrupt to Port Assignment
-#
-
-#
-# Assignment
-#
-CONFIG_PINTx_REASSIGN=y
-CONFIG_PINT0_ASSIGN=0x00000101
-CONFIG_PINT1_ASSIGN=0x01010000
-CONFIG_PINT2_ASSIGN=0x07000101
-CONFIG_PINT3_ASSIGN=0x02020303
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
# CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
# CONFIG_MEMSET_L1 is not set
# CONFIG_MEMCPY_L1 is not set
-CONFIG_STRCMP_L1=y
-CONFIG_STRNCMP_L1=y
-CONFIG_STRCPY_L1=y
-CONFIG_STRNCPY_L1=y
# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_CACHE_FLUSH_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
CONFIG_DMA_UNCACHED_2M=y
-# CONFIG_DMA_UNCACHED_1M is not set
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-# CONFIG_BFIN_L2_ICACHEABLE is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
-# CONFIG_BFIN_L2_DCACHEABLE is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
-# CONFIG_C_CDPRIO is not set
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B2
CONFIG_EBIU_MBSCTLVAL=0x0
CONFIG_EBIU_MODEVAL=0x1
CONFIG_EBIU_FCTLVAL=0x6
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-# CONFIG_CAN_VCAN is not set
CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
-# CONFIG_CAN_MCP251X is not set
CONFIG_CAN_BFIN=m
-# CONFIG_CAN_SJA1000 is not set
-
-#
-# CAN USB interfaces
-#
-# CONFIG_CAN_EMS_USB is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
CONFIG_BFIN_SIR=m
-# CONFIG_BFIN_SIR0 is not set
-# CONFIG_BFIN_SIR2 is not set
CONFIG_BFIN_SIR3=y
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_MCS_FIR is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_BF5XX=y
# CONFIG_MTD_NAND_BF5XX_HWECC is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_BF54X=y
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
CONFIG_KEYBOARD_BFIN=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=m
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_AD7160 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_ADXL34X is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-# CONFIG_SERIAL_BFIN_UART0 is not set
CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART2 is not set
-# CONFIG_SERIAL_BFIN_UART3 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_BF54X_LQ043=y
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_BFIN_LQ035Q1 is not set
-# CONFIG_FB_BFIN_7393 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_BLACKFIN_VGA16 is not set
-CONFIG_LOGO_BLACKFIN_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
-# CONFIG_SND_BF5XX_I2S is not set
-# CONFIG_SND_BF5XX_TDM is not set
CONFIG_SND_BF5XX_AC97=y
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
-CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
CONFIG_SND_BF5XX_SOC_AD1980=y
-CONFIG_SND_BF5XX_SOC_SPORT=y
-CONFIG_SND_BF5XX_SOC_AC97=y
-CONFIG_SND_BF5XX_SPORT_NUM=0
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=y
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
CONFIG_SDH_BFIN=y
CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_TRACEHOOK_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-# CONFIG_BFIN_PSEUDODBG_INSNS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31.4
-# Sat Oct 24 12:15:32 2009
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
CONFIG_BF561=y
-# CONFIG_SMP is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=5
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
CONFIG_BF_REV_0_5=y
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
CONFIG_IRQ_TIMER0=10
-CONFIG_IRQ_TIMER1=10
-CONFIG_IRQ_TIMER2=10
-CONFIG_IRQ_TIMER3=10
-CONFIG_IRQ_TIMER4=10
-CONFIG_IRQ_TIMER5=10
-CONFIG_IRQ_TIMER6=10
-CONFIG_IRQ_TIMER7=10
-CONFIG_IRQ_SPI_ERROR=7
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
CONFIG_BFIN561_ACVILON=y
-
-#
-# BF561 Specific Configuration
-#
-
-#
-# Core B Support
-#
# CONFIG_BF561_COREB is not set
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA1_ERROR=7
-CONFIG_IRQ_DMA2_ERROR=7
-CONFIG_IRQ_IMDMA_ERROR=7
-CONFIG_IRQ_PPI0_ERROR=7
-CONFIG_IRQ_PPI1_ERROR=7
-CONFIG_IRQ_UART_ERROR=7
-CONFIG_IRQ_RESERVED_ERROR=7
-CONFIG_IRQ_DMA1_0=8
-CONFIG_IRQ_DMA1_1=8
-CONFIG_IRQ_DMA1_2=8
-CONFIG_IRQ_DMA1_3=8
-CONFIG_IRQ_DMA1_4=8
-CONFIG_IRQ_DMA1_5=8
-CONFIG_IRQ_DMA1_6=8
-CONFIG_IRQ_DMA1_7=8
-CONFIG_IRQ_DMA1_8=8
-CONFIG_IRQ_DMA1_9=8
-CONFIG_IRQ_DMA1_10=8
-CONFIG_IRQ_DMA1_11=8
-CONFIG_IRQ_DMA2_0=9
-CONFIG_IRQ_DMA2_1=9
-CONFIG_IRQ_DMA2_2=9
-CONFIG_IRQ_DMA2_3=9
-CONFIG_IRQ_DMA2_4=9
-CONFIG_IRQ_DMA2_5=9
-CONFIG_IRQ_DMA2_6=9
-CONFIG_IRQ_DMA2_7=9
-CONFIG_IRQ_DMA2_8=9
-CONFIG_IRQ_DMA2_9=9
-CONFIG_IRQ_DMA2_10=9
-CONFIG_IRQ_DMA2_11=9
-CONFIG_IRQ_TIMER8=10
-CONFIG_IRQ_TIMER9=10
-CONFIG_IRQ_TIMER10=10
-CONFIG_IRQ_TIMER11=10
-CONFIG_IRQ_PROG0_INTA=11
-CONFIG_IRQ_PROG0_INTB=11
-CONFIG_IRQ_PROG1_INTA=11
-CONFIG_IRQ_PROG1_INTB=11
-CONFIG_IRQ_PROG2_INTA=11
-CONFIG_IRQ_PROG2_INTB=11
-CONFIG_IRQ_DMA1_WRRD0=8
-CONFIG_IRQ_DMA1_WRRD1=8
-CONFIG_IRQ_DMA2_WRRD0=9
-CONFIG_IRQ_DMA2_WRRD1=9
-CONFIG_IRQ_IMDMA_WRRD0=12
-CONFIG_IRQ_IMDMA_WRRD1=12
-CONFIG_IRQ_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
CONFIG_CLKIN_HZ=12000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=y
CONFIG_DMA_UNCACHED_4M=y
-# CONFIG_DMA_UNCACHED_2M is not set
-# CONFIG_DMA_UNCACHED_1M is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-# CONFIG_BFIN_L2_ICACHEABLE is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_DCACHEABLE is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-CONFIG_C_B0PEN=y
-CONFIG_C_B1PEN=y
-CONFIG_C_B2PEN=y
-# CONFIG_C_B3PEN is not set
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
CONFIG_BANK_0=0x99b2
CONFIG_BANK_1=0x3350
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0xAAC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_UCLINUX is not set
CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=y
-# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=y
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_BFIN_DMA_INTERFACE is not set
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-CONFIG_BFIN_SIMPLE_TIMER=y
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_SERIAL_BFIN_DMA is not set
CONFIG_SERIAL_BFIN_PIO=y
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOPCA=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73322 is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_BF5XX_I2S=y
-# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
-# CONFIG_SND_BF5XX_SOC_AD73311 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
-# CONFIG_SND_BF5XX_TDM is not set
-# CONFIG_SND_BF5XX_AC97 is not set
-CONFIG_SND_BF5XX_SOC_SPORT=y
CONFIG_SND_BF5XX_SPORT_NUM=1
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=866
CONFIG_FAT_DEFAULT_IOCHARSET="cp1251"
CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
# CONFIG_JFFS2_ZLIB is not set
CONFIG_JFFS2_LZO=y
# CONFIG_JFFS2_RTIME is not set
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_JFFS2_CMODE_FAVOURLZO=y
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp1251"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-#
-CONFIG_SYMBOL_PREFIX="_"
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
CONFIG_BF561=y
-# CONFIG_SMP is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=5
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
CONFIG_IRQ_TIMER0=10
-CONFIG_IRQ_TIMER1=10
-CONFIG_IRQ_TIMER2=10
-CONFIG_IRQ_TIMER3=10
-CONFIG_IRQ_TIMER4=10
-CONFIG_IRQ_TIMER5=10
-CONFIG_IRQ_TIMER6=10
-CONFIG_IRQ_TIMER7=10
-CONFIG_IRQ_SPI_ERROR=7
-CONFIG_BFIN561_EZKIT=y
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_ACVILON is not set
-
-#
-# BF561 Specific Configuration
-#
-
-#
-# Core B Support
-#
-CONFIG_BF561_COREB=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA1_ERROR=7
-CONFIG_IRQ_DMA2_ERROR=7
-CONFIG_IRQ_IMDMA_ERROR=7
-CONFIG_IRQ_PPI0_ERROR=7
-CONFIG_IRQ_PPI1_ERROR=7
-CONFIG_IRQ_UART_ERROR=7
-CONFIG_IRQ_RESERVED_ERROR=7
-CONFIG_IRQ_DMA1_0=8
-CONFIG_IRQ_DMA1_1=8
-CONFIG_IRQ_DMA1_2=8
-CONFIG_IRQ_DMA1_3=8
-CONFIG_IRQ_DMA1_4=8
-CONFIG_IRQ_DMA1_5=8
-CONFIG_IRQ_DMA1_6=8
-CONFIG_IRQ_DMA1_7=8
-CONFIG_IRQ_DMA1_8=8
-CONFIG_IRQ_DMA1_9=8
-CONFIG_IRQ_DMA1_10=8
-CONFIG_IRQ_DMA1_11=8
-CONFIG_IRQ_DMA2_0=9
-CONFIG_IRQ_DMA2_1=9
-CONFIG_IRQ_DMA2_2=9
-CONFIG_IRQ_DMA2_3=9
-CONFIG_IRQ_DMA2_4=9
-CONFIG_IRQ_DMA2_5=9
-CONFIG_IRQ_DMA2_6=9
-CONFIG_IRQ_DMA2_7=9
-CONFIG_IRQ_DMA2_8=9
-CONFIG_IRQ_DMA2_9=9
-CONFIG_IRQ_DMA2_10=9
-CONFIG_IRQ_DMA2_11=9
-CONFIG_IRQ_TIMER8=10
-CONFIG_IRQ_TIMER9=10
-CONFIG_IRQ_TIMER10=10
-CONFIG_IRQ_TIMER11=10
-CONFIG_IRQ_PROG0_INTA=11
-CONFIG_IRQ_PROG0_INTB=11
-CONFIG_IRQ_PROG1_INTA=11
-CONFIG_IRQ_PROG1_INTB=11
-CONFIG_IRQ_PROG2_INTA=11
-CONFIG_IRQ_PROG2_INTB=11
-CONFIG_IRQ_DMA1_WRRD0=8
-CONFIG_IRQ_DMA1_WRRD1=8
-CONFIG_IRQ_DMA2_WRRD0=9
-CONFIG_IRQ_DMA2_WRRD1=9
-CONFIG_IRQ_IMDMA_WRRD0=12
-CONFIG_IRQ_IMDMA_WRRD1=12
-CONFIG_IRQ_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
CONFIG_CLKIN_HZ=30000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_STRCMP_L1=y
-CONFIG_STRNCMP_L1=y
-CONFIG_STRCPY_L1=y
-CONFIG_STRNCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_CACHE_FLUSH_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-# CONFIG_BFIN_L2_ICACHEABLE is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
CONFIG_BFIN_L2_DCACHEABLE=y
-# CONFIG_BFIN_L2_WRITEBACK is not set
CONFIG_BFIN_L2_WRITETHROUGH=y
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-CONFIG_C_B0PEN=y
-CONFIG_C_B1PEN=y
-CONFIG_C_B2PEN=y
-# CONFIG_C_B3PEN is not set
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0xAAC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
-# CONFIG_BFIN_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_TRACEHOOK_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-# CONFIG_BFIN_PSEUDODBG_INSNS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
CONFIG_BF532=y
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF561 is not set
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
CONFIG_BF_REV_0_5=y
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC32M16A2TG_75=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_BFIN532_IP0X is not set
CONFIG_BLACKSTAMP=y
-# CONFIG_GENERIC_BF533_BOARD is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-# CONFIG_PLL_BYPASS is not set
-# CONFIG_CLKIN_HALF is not set
-CONFIG_VCO_MULT=16
-CONFIG_CCLK_DIV_1=y
-# CONFIG_CCLK_DIV_2 is not set
-# CONFIG_CCLK_DIV_4 is not set
-# CONFIG_CCLK_DIV_8 is not set
-CONFIG_SCLK_DIV=3
-CONFIG_MAX_MEM_SIZE=64
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Memory Setup
-#
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-# CONFIG_RAMKERNEL is not set
CONFIG_ROMKERNEL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchonous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0xAAC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-
-#
-# Possible Suspend Mem / Hibernate Wake-Up Sources
-#
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
# CONFIG_M25PXX_USE_FAST_READ is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
+CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=y
-CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-CONFIG_EEPROM_AT25=y
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_SPI=y
-# CONFIG_SPI_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=y
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_SAMPLES is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_MMRS=y
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_AIO is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
CONFIG_BF527=y
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
CONFIG_BF_REV_0_1=y
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF52x=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-# CONFIG_BFIN527_EZKIT is not set
CONFIG_BFIN527_BLUETECHNIX_CM=y
-# CONFIG_BFIN526_EZBRD is not set
-
-#
-# BF527 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF527_SPORT0_PORTF is not set
-CONFIG_BF527_SPORT0_PORTG=y
-CONFIG_BF527_SPORT0_TSCLK_PG10=y
-# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF527_UART1_PORTF=y
-# CONFIG_BF527_UART1_PORTG is not set
-# CONFIG_BF527_NAND_D_PORTF is not set
-CONFIG_BF527_NAND_D_PORTH=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_SPI=10
-CONFIG_IRQ_SPI_ERROR=7
-CONFIG_IRQ_NFC_ERROR=7
-CONFIG_IRQ_HDMA_ERROR=7
-CONFIG_IRQ_HDMA=7
-CONFIG_IRQ_USB_EINT=10
CONFIG_IRQ_USB_INT0=11
CONFIG_IRQ_USB_INT1=11
CONFIG_IRQ_USB_INT2=11
CONFIG_IRQ_USB_DMA=11
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
# CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
# CONFIG_MEMSET_L1 is not set
# CONFIG_MEMCPY_L1 is not set
# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0xFFC0
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_GPIO_ADDR=y
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
CONFIG_BFIN_MAC_RMII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
CONFIG_EARLY_PRINTK=y
-# CONFIG_CPLB_INFO is not set
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-CONFIG_BF533=y
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=6
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BLACKSTAMP is not set
CONFIG_BFIN533_BLUETECHNIX_CM=y
-# CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_BFIN532_IP0X is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=750000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
CONFIG_SYSCALL_TAB_L1=y
CONFIG_CPLB_SWITCH_TAB_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0xFFC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_BFIN_DMA_INTERFACE is not set
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
CONFIG_BF537=y
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=2
-CONFIG_BF_REV_MAX=3
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_SPI=10
-# CONFIG_BFIN537_STAMP is not set
CONFIG_BFIN537_BLUETECHNIX_CM_E=y
-# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
-# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_CAMSIG_MINOTAUR is not set
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
CONFIG_SYSCALL_TAB_L1=y
CONFIG_CPLB_SWITCH_TAB_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0xFFC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_GPIO_ADDR=y
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_BFIN_MAC_RMII is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=y
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-CONFIG_USB_GADGET_NET2272=y
-CONFIG_USB_NET2272=m
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
CONFIG_BF537=y
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=2
-CONFIG_BF_REV_MAX=3
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_SPI=10
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
CONFIG_BFIN537_BLUETECHNIX_CM_U=y
-# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_CAMSIG_MINOTAUR is not set
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
CONFIG_CLKIN_HZ=30000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
CONFIG_SYSCALL_TAB_L1=y
CONFIG_CPLB_SWITCH_TAB_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
CONFIG_BANK_2=0xFFC2
CONFIG_BANK_3=0xFFC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_GPIO_ADDR=y
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=y
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-CONFIG_USB_GADGET_NET2272=y
-CONFIG_USB_NET2272=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
CONFIG_BF548_std=y
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
CONFIG_BF_REV_ANY=y
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF54x=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_SPI0=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_CNT=8
CONFIG_IRQ_TIMER0=11
-CONFIG_IRQ_TIMER1=11
-CONFIG_IRQ_TIMER2=11
-CONFIG_IRQ_TIMER3=11
-CONFIG_IRQ_TIMER4=11
-CONFIG_IRQ_TIMER5=11
-CONFIG_IRQ_TIMER6=11
-CONFIG_IRQ_TIMER7=11
-CONFIG_IRQ_USB_INT0=11
-CONFIG_IRQ_USB_INT1=11
-CONFIG_IRQ_USB_INT2=11
-CONFIG_IRQ_USB_DMA=11
-CONFIG_IRQ_TIMER8=11
-CONFIG_IRQ_TIMER9=11
-CONFIG_IRQ_TIMER10=11
-CONFIG_IRQ_SPORT2_RX=9
-CONFIG_IRQ_SPORT2_TX=9
-CONFIG_IRQ_SPORT3_RX=9
-CONFIG_IRQ_SPORT3_TX=9
-CONFIG_IRQ_SPI1=10
-CONFIG_IRQ_SPI2=10
-CONFIG_IRQ_TWI0=11
-CONFIG_IRQ_TWI1=11
-# CONFIG_BFIN548_EZKIT is not set
CONFIG_BFIN548_BLUETECHNIX_CM=y
-
-#
-# BF548 Specific Configuration
-#
# CONFIG_DEB_DMA_URGENT is not set
-# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMAC0_ERR=7
-CONFIG_IRQ_EPPI0_ERR=7
-CONFIG_IRQ_SPORT0_ERR=7
-CONFIG_IRQ_SPORT1_ERR=7
-CONFIG_IRQ_SPI0_ERR=7
-CONFIG_IRQ_UART0_ERR=7
-CONFIG_IRQ_EPPI0=8
-CONFIG_IRQ_PINT0=12
-CONFIG_IRQ_PINT1=12
-CONFIG_IRQ_MDMAS0=13
-CONFIG_IRQ_MDMAS1=13
-CONFIG_IRQ_WATCHDOG=13
-CONFIG_IRQ_DMAC1_ERR=7
-CONFIG_IRQ_SPORT2_ERR=7
-CONFIG_IRQ_SPORT3_ERR=7
-CONFIG_IRQ_MXVR_DATA=7
-CONFIG_IRQ_SPI1_ERR=7
-CONFIG_IRQ_SPI2_ERR=7
-CONFIG_IRQ_UART1_ERR=7
-CONFIG_IRQ_UART2_ERR=7
-CONFIG_IRQ_CAN0_ERR=7
-CONFIG_IRQ_EPPI1=9
-CONFIG_IRQ_EPPI2=9
-CONFIG_IRQ_ATAPI_RX=10
-CONFIG_IRQ_ATAPI_TX=10
-CONFIG_IRQ_CAN0_RX=11
-CONFIG_IRQ_CAN0_TX=11
-CONFIG_IRQ_MDMAS2=13
-CONFIG_IRQ_MDMAS3=13
-CONFIG_IRQ_MXVR_ERR=11
-CONFIG_IRQ_MXVR_MSG=11
-CONFIG_IRQ_MXVR_PKT=11
-CONFIG_IRQ_EPPI1_ERR=7
-CONFIG_IRQ_EPPI2_ERR=7
-CONFIG_IRQ_UART3_ERR=7
-CONFIG_IRQ_HOST_ERR=7
-CONFIG_IRQ_PIXC_ERR=7
-CONFIG_IRQ_NFC_ERR=7
-CONFIG_IRQ_ATAPI_ERR=7
-CONFIG_IRQ_CAN1_ERR=7
-CONFIG_IRQ_HS_DMA_ERR=7
-CONFIG_IRQ_PIXC_IN0=8
-CONFIG_IRQ_PIXC_IN1=8
-CONFIG_IRQ_PIXC_OUT=8
-CONFIG_IRQ_SDH=8
-CONFIG_IRQ_KEY=8
-CONFIG_IRQ_CAN1_RX=11
-CONFIG_IRQ_CAN1_TX=11
-CONFIG_IRQ_SDH_MASK0=11
-CONFIG_IRQ_SDH_MASK1=11
-CONFIG_IRQ_OTPSEC=11
-CONFIG_IRQ_PINT2=11
-CONFIG_IRQ_PINT3=11
-
-#
-# Pin Interrupt to Port Assignment
-#
-
-#
-# Assignment
-#
-CONFIG_PINTx_REASSIGN=y
-CONFIG_PINT0_ASSIGN=0x00000101
-CONFIG_PINT1_ASSIGN=0x01010000
-CONFIG_PINT2_ASSIGN=0x07000101
-CONFIG_PINT3_ASSIGN=0x02020303
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_GENERIC_TIME is not set
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
# CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
# CONFIG_MEMSET_L1 is not set
# CONFIG_MEMCPY_L1 is not set
# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-# CONFIG_BFIN_L2_ICACHEABLE is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-# CONFIG_BFIN_EXTMEM_WRITEBACK
CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
-# CONFIG_BFIN_L2_DCACHEABLE is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
-# CONFIG_C_CDPRIO is not set
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
CONFIG_BANK_1=0x5554
-CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
CONFIG_EBIU_MBSCTLVAL=0x0
CONFIG_EBIU_MODEVAL=0x1
CONFIG_EBIU_FCTLVAL=0x6
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_BFIN is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_SERIAL_BFIN_DMA is not set
CONFIG_SERIAL_BFIN_PIO=y
-# CONFIG_SERIAL_BFIN_UART0 is not set
CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART2 is not set
-# CONFIG_SERIAL_BFIN_UART3 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
CONFIG_USB_GADGET_MUSB_HDRC=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_SDH_BFIN=m
-# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
-# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=m
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
CONFIG_BF561=y
-# CONFIG_SMP is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=5
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC8M32B2B5_7=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
CONFIG_IRQ_TIMER0=10
-CONFIG_IRQ_TIMER1=10
-CONFIG_IRQ_TIMER2=10
-CONFIG_IRQ_TIMER3=10
-CONFIG_IRQ_TIMER4=10
-CONFIG_IRQ_TIMER5=10
-CONFIG_IRQ_TIMER6=10
-CONFIG_IRQ_TIMER7=10
-CONFIG_IRQ_SPI_ERROR=7
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
CONFIG_BFIN561_BLUETECHNIX_CM=y
-
-#
-# BF561 Specific Configuration
-#
-
-#
-# Core B Support
-#
-CONFIG_BF561_COREB=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA1_ERROR=7
-CONFIG_IRQ_DMA2_ERROR=7
-CONFIG_IRQ_IMDMA_ERROR=7
-CONFIG_IRQ_PPI0_ERROR=7
-CONFIG_IRQ_PPI1_ERROR=7
-CONFIG_IRQ_UART_ERROR=7
-CONFIG_IRQ_RESERVED_ERROR=7
-CONFIG_IRQ_DMA1_0=8
-CONFIG_IRQ_DMA1_1=8
-CONFIG_IRQ_DMA1_2=8
-CONFIG_IRQ_DMA1_3=8
-CONFIG_IRQ_DMA1_4=8
-CONFIG_IRQ_DMA1_5=8
-CONFIG_IRQ_DMA1_6=8
-CONFIG_IRQ_DMA1_7=8
-CONFIG_IRQ_DMA1_8=8
-CONFIG_IRQ_DMA1_9=8
-CONFIG_IRQ_DMA1_10=8
-CONFIG_IRQ_DMA1_11=8
-CONFIG_IRQ_DMA2_0=9
-CONFIG_IRQ_DMA2_1=9
-CONFIG_IRQ_DMA2_2=9
-CONFIG_IRQ_DMA2_3=9
-CONFIG_IRQ_DMA2_4=9
-CONFIG_IRQ_DMA2_5=9
-CONFIG_IRQ_DMA2_6=9
-CONFIG_IRQ_DMA2_7=9
-CONFIG_IRQ_DMA2_8=9
-CONFIG_IRQ_DMA2_9=9
-CONFIG_IRQ_DMA2_10=9
-CONFIG_IRQ_DMA2_11=9
-CONFIG_IRQ_TIMER8=10
-CONFIG_IRQ_TIMER9=10
-CONFIG_IRQ_TIMER10=10
-CONFIG_IRQ_TIMER11=10
-CONFIG_IRQ_PROG0_INTA=11
-CONFIG_IRQ_PROG0_INTB=11
-CONFIG_IRQ_PROG1_INTA=11
-CONFIG_IRQ_PROG1_INTB=11
-CONFIG_IRQ_PROG2_INTA=11
-CONFIG_IRQ_PROG2_INTB=11
-CONFIG_IRQ_DMA1_WRRD0=8
-CONFIG_IRQ_DMA1_WRRD1=8
-CONFIG_IRQ_DMA2_WRRD0=9
-CONFIG_IRQ_DMA2_WRRD1=9
-CONFIG_IRQ_IMDMA_WRRD0=12
-CONFIG_IRQ_IMDMA_WRRD1=12
-CONFIG_IRQ_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
CONFIG_SYSCALL_TAB_L1=y
CONFIG_CPLB_SWITCH_TAB_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-# CONFIG_BFIN_L2_ICACHEABLE is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
-# CONFIG_BFIN_L2_DCACHEABLE is not set
-# CONFIG_BFIN_L2_WRITEBACK is not set
-# CONFIG_BFIN_L2_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-CONFIG_C_B0PEN=y
-CONFIG_C_B1PEN=y
-CONFIG_C_B2PEN=y
-# CONFIG_C_B3PEN is not set
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0xFFC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
CONFIG_SMSC911X=m
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-CONFIG_USB_GADGET_NET2272=y
-CONFIG_USB_NET2272=m
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.14
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF522 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
CONFIG_BF532=y
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF561 is not set
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
CONFIG_BF_REV_0_5=y
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
CONFIG_H8606_HVSISTEMAS=y
-# CONFIG_GENERIC_BF533_BOARD is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-
-#
-# Memory Setup
-#
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
# CONFIG_CACHELINE_ALIGNED_L1 is not set
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchonous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x100000
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_BF5xx is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
# CONFIG_M25PXX_USE_FAST_READ is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
+CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
CONFIG_DM9000=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_AX88180 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-CONFIG_BF5xx_PFLAGS=y
-# CONFIG_BF5xx_PFLAGS_PROC is not set
-# CONFIG_BF5xx_PPIFCD is not set
-CONFIG_BFIN_SIMPLE_TIMER=y
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
-CONFIG_BFIN_TIMER_LATENCY=y
-# CONFIG_AD5304 is not set
-# CONFIG_BF5xx_FBDMA is not set
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_BFIN_WDT is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-CONFIG_EEPROM_AT25=y
CONFIG_SPI_SPIDEV=y
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
+CONFIG_WATCHDOG=y
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73311 is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.18
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
CONFIG_BF532=y
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF561 is not set
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
CONFIG_BF_REV_0_5=y
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
-CONFIG_MEM_MT48LC32M16A2TG_75=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_H8606_HVSISTEMAS is not set
CONFIG_BFIN532_IP0X=y
-# CONFIG_GENERIC_BF533_BOARD is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=10000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-
-#
-# Memory Setup
-#
-CONFIG_MAX_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=10
-
-#
-# Hardware addresses
-#
-CONFIG_IP0X_NET1=0x20100000
-CONFIG_IP0X_NET2=0x20200000
-CONFIG_IP0X_USB=0x20300000
-CONFIG_BOOT_LOAD=0x1000
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
# CONFIG_BFIN_ICACHE is not set
# CONFIG_BFIN_DCACHE is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_L1_MAX_PIECE=16
-# CONFIG_MPU is not set
-
-#
-# Asynchonous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
CONFIG_BANK_0=0xffc2
CONFIG_BANK_1=0xffc2
CONFIG_BANK_2=0xffc2
CONFIG_BANK_3=0xffc2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=y
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=y
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_IPRANGE=y
-CONFIG_IP_NF_MATCH_TOS=y
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_UCLINUX=y
CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=y
-CONFIG_BFIN_NAND_BASE=0x20000000
-CONFIG_BFIN_NAND_SIZE=0x10000000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=10
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
CONFIG_DM9000=y
# CONFIG_NETDEV_1000 is not set
-# CONFIG_AX88180 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
-# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_BFIN_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_WATCHDOG=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
CONFIG_USB_ISP1362_HCD=y
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_SPI_MMC=m
-CONFIG_SPI_MMC_FRAMEWORK_DRIVER=y
-# CONFIG_SPI_MMC_BFIN_PIO_SPI is not set
-CONFIG_SPI_MMC_CS_CHAN=5
-CONFIG_SPI_MMC_MAX_HZ=20000000
-# CONFIG_SPI_MMC_CARD_DETECT is not set
-# CONFIG_SPI_MMC_DEBUG_MODE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-# CONFIG_SECURITY_ROOTPLUG is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-#
-CONFIG_SYMBOL_PREFIX="_"
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
CONFIG_BF537=y
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=2
-CONFIG_BF_REV_MAX=3
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC32M8A2_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_SPI=10
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
-# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
CONFIG_PNAV10=y
-# CONFIG_CAMSIG_MINOTAUR is not set
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=24576000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_STRCMP_L1=y
-CONFIG_STRNCMP_L1=y
-CONFIG_STRCPY_L1=y
-CONFIG_STRNCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
CONFIG_SYSCALL_TAB_L1=y
CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_CACHE_FLUSH_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
CONFIG_BANK_1=0x33B0
CONFIG_BANK_2=0x33B0
CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_GPIO_ADDR is not set
CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_BFIN_MAC=y
# CONFIG_BFIN_MAC_USE_L1 is not set
CONFIG_BFIN_TX_DESC_NUM=100
CONFIG_BFIN_RX_DESC_NUM=100
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_AD7160 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_ADXL34X is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TWI_LCD is not set
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_BFIN_LQ035Q1 is not set
-CONFIG_FB_BF537_LQ035=y
-# CONFIG_FB_BFIN_7393 is not set
-# CONFIG_FB_HITACHI_TX09 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=y
-CONFIG_HID_SUPPORT=y
# CONFIG_HID is not set
-# CONFIG_HID_PID is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_TRACEHOOK_SELF_TEST is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_CPLB_INFO is not set
# CONFIG_ACCESS_CHECK is not set
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-# CONFIG_BFIN_PSEUDODBG_INSNS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.10
-# Fri Nov 2 20:50:23 2007
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF522 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
CONFIG_BF537=y
-# CONFIG_BF542 is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF561 is not set
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
-# CONFIG_BFIN527_EZKIT is not set
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_VISTASCAN is not set
-# CONFIG_BFIN533_SR3K is not set
-CONFIG_GENERIC_BOARD=y
-CONFIG_MEM_GENERIC_BOARD=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=22118400
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-
-#
-# Memory Setup
-#
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
CONFIG_BOOT_LOAD=0x400000
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_CLKIN_HZ=22118400
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_DMA_UNCACHED_2M=y
-# CONFIG_DMA_UNCACHED_1M is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchonous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80000000
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=m
-CONFIG_BFIN_NAND_BASE=0x20212000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=3
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
+CONFIG_EEPROM_AT25=m
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=y
-# CONFIG_BF53X_PFBUTTONS is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-CONFIG_BF5xx_PFLAGS=y
-# CONFIG_BF5xx_PFLAGS_PROC is not set
-# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
-# CONFIG_BF5xx_PPI is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-# CONFIG_AD5304 is not set
-# CONFIG_BF5xx_TEA5764 is not set
-# CONFIG_BF5xx_FBDMA is not set
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
-CONFIG_HW_RANDOM=m
-# CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_BLACKFIN_GPIO is not set
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-CONFIG_EEPROM_AT25=m
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
CONFIG_HWMON=m
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_PPI_GENERIC is not set
-CONFIG_VIDEO_BLACKFIN_CAM=m
-# CONFIG_VIDEO_BLACKFIN_MT9M001 is not set
-
-#
-# CMOS Camera Sensor Selection
-#
-# CONFIG_MT9V022 is not set
-# CONFIG_MT9M001 is not set
-# CONFIG_VS6524 is not set
-# CONFIG_VS6624 is not set
-CONFIG_OV9655=y
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HWERR is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.3
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
CONFIG_BF518=y
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
CONFIG_BF_REV_0_1=y
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF51x=y
-# CONFIG_BFIN518F_EZBRD is not set
CONFIG_BFIN518F_TCM=y
-
-#
-# BF518 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF518_SPORT0_PORTF is not set
-CONFIG_BF518_SPORT0_PORTG=y
-CONFIG_BF518_SPORT0_TSCLK_PG10=y
-# CONFIG_BF518_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF518_UART1_PORTF=y
-# CONFIG_BF518_UART1_PORTG is not set
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_PTP_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI0=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-CONFIG_IRQ_SPI0_ERROR=7
-CONFIG_IRQ_SPI1_ERROR=7
-CONFIG_IRQ_RSI_INT0=7
-CONFIG_IRQ_RSI_INT1=7
-CONFIG_IRQ_PWM_TRIP=10
-CONFIG_IRQ_PWM_SYNC=10
-CONFIG_IRQ_PTP_STAT=10
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
# CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
# CONFIG_MEMSET_L1 is not set
# CONFIG_MEMCPY_L1 is not set
# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_BFIN_MAC=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_BFIN_MAC_RMII is not set
-CONFIG_BFIN_MAC_USE_HWSTAMP=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-CONFIG_SPI_BFIN_LOCK=y
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
-# CONFIG_SDH_BFIN is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_AIO is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
CONFIG_BF537=y
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=2
-CONFIG_BF_REV_MAX=3
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_SPI=10
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
CONFIG_BFIN537_BLUETECHNIX_TCM=y
-# CONFIG_PNAV10 is not set
-# CONFIG_CAMSIG_MINOTAUR is not set
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
CONFIG_SYSCALL_TAB_L1=y
CONFIG_CPLB_SWITCH_TAB_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0xFFC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_GPIO_ADDR=y
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_BFIN_MAC_RMII is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=y
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-CONFIG_USB_GADGET_NET2272=y
-CONFIG_USB_NET2272=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
include include/asm-generic/Kbuild.asm
-unifdef-y += bfin_sport.h
-unifdef-y += fixed_code.h
+header-y += bfin_sport.h
+header-y += fixed_code.h
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#ifdef CONFIG_SMP
#define __cacheline_aligned
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
#define dma_supported(d, m) (1)
-#define dma_get_cache_alignment() (32)
-#define dma_is_consistent(d, h) (1)
static inline int
dma_set_mask(struct device *dev, u64 dma_mask)
* partitions = mtd partition list
*/
-#define NFC_PG_SIZE_256 0
-#define NFC_PG_SIZE_512 1
#define NFC_PG_SIZE_OFFSET 9
#define NFC_NWIDTH_8 0
struct bf5xx_nand_platform {
/* NAND chip information */
- unsigned short page_size;
unsigned short data_width;
/* RD/WR strobe delay timing information, all times in SCLK cycles */
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
#endif /* !(_BLACKFIN_SCATTERLIST_H) */
/*
* sys_execve() executes a new program.
*/
-asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp)
+asmlinkage int sys_execve(const char __user *name,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp)
{
int error;
char *filename;
static struct platform_nand_data bfin_plat_nand_data = {
.chip = {
+ .nr_chips = 1,
.chip_delay = 30,
#ifdef CONFIG_MTD_PARTITIONS
.part_probe_types = part_probes,
static struct platform_nand_data bfin_plat_nand_data = {
.chip = {
+ .nr_chips = 1,
.chip_delay = 30,
#ifdef CONFIG_MTD_PARTITIONS
.part_probe_types = part_probes,
/*
* sys_execve() executes a new program.
*/
-asmlinkage int sys_execve(const char *fname, char **argv, char **envp,
+asmlinkage int sys_execve(const char *fname,
+ const char *const *argv,
+ const char *const *envp,
long r13, long mof, long srp,
struct pt_regs *regs)
{
/* sys_execve() executes a new program. */
asmlinkage int
-sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp,
- struct pt_regs *regs)
+sys_execve(const char *fname,
+ const char *const *argv,
+ const char *const *envp, long r13, long mof, long srp,
+ struct pt_regs *regs)
{
int error;
char *filename;
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Mon Dec 3 11:18:54 2007
-#
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NO_IOPORT=y
-CONFIG_FORCE_MAX_ZONEORDER=6
-CONFIG_CRIS=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_GENERIC_HARDIRQS=y
CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc"
-# CONFIG_ETRAX_WATCHDOG is not set
CONFIG_ETRAX_FAST_TIMER=y
-# CONFIG_ETRAX_KMALLOCED_MODULES is not set
-# CONFIG_OOM_REBOOT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-
-#
-# Hardware setup
-#
-# CONFIG_ETRAX100LX is not set
-# CONFIG_ETRAX100LX_V2 is not set
-# CONFIG_SVINTO_SIM is not set
-# CONFIG_ETRAXFS is not set
CONFIG_CRIS_MACH_ARTPEC3=y
-# CONFIG_ETRAX_VCS_SIM is not set
-# CONFIG_ETRAX_ARCH_V10 is not set
-CONFIG_ETRAX_ARCH_V32=y
CONFIG_ETRAX_DRAM_SIZE=32
-CONFIG_ETRAX_VMEM_SIZE=8
-CONFIG_ETRAX_FLASH_BUSWIDTH=2
-CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1
CONFIG_ETRAX_FLASH1_SIZE=4
-CONFIG_ETRAX_DEBUG_PORT0=y
-# CONFIG_ETRAX_DEBUG_PORT1 is not set
-# CONFIG_ETRAX_DEBUG_PORT2 is not set
-# CONFIG_ETRAX_DEBUG_PORT3 is not set
-# CONFIG_ETRAX_DEBUG_PORT_NULL is not set
-CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
-CONFIG_ETRAX_SERIAL_PORTS=5
CONFIG_ETRAX_DEF_GIO_PA_OE=1c
CONFIG_ETRAX_DEF_GIO_PA_OUT=00
CONFIG_ETRAX_DEF_GIO_PB_OE=00000
CONFIG_ETRAX_DEF_GIO_PB_OUT=00000
-CONFIG_ETRAX_DEF_GIO_PC_OE=00000
-CONFIG_ETRAX_DEF_GIO_PC_OUT=00000
-
-#
-# Artpec-3 options
-#
-CONFIG_ETRAX_L2CACHE=y
-CONFIG_ETRAX_DDR=y
-CONFIG_ETRAX_DDR2_MRS=0
-CONFIG_ETRAX_DDR2_TIMING=0
-CONFIG_ETRAX_DDR2_CONFIG=0
-CONFIG_ETRAX_PIO_CE0_CFG=0
-CONFIG_ETRAX_PIO_CE1_CFG=0
-CONFIG_ETRAX_PIO_CE2_CFG=0
-# CONFIG_CPU_FREQ is not set
-# CONFIG_ETRAX_NBR_LED_GRP_ZERO is not set
-CONFIG_ETRAX_NBR_LED_GRP_ONE=y
-# CONFIG_ETRAX_NBR_LED_GRP_TWO is not set
-CONFIG_ETRAX_LED_G_NET0="PA3"
-CONFIG_ETRAX_LED_R_NET0="PA4"
-CONFIG_ETRAX_V32_LED2G="PA5"
-CONFIG_ETRAX_V32_LED2R="PA6"
-CONFIG_ETRAX_V32_LED3G="PA7"
-CONFIG_ETRAX_V32_LED3R="PA7"
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Drivers for built-in interfaces
-#
CONFIG_ETRAX_ETHERNET=y
-# CONFIG_ETRAX_IDE is not set
CONFIG_ETRAX_AXISFLASHMAP=y
-CONFIG_ETRAX_PTABLE_SECTOR=65536
-# CONFIG_ETRAX_I2C is not set
-# CONFIG_ETRAX_GPIO is not set
-# CONFIG_ETRAX_NO_PHY is not set
-# CONFIG_ETRAX_ETHERNET_IFACE0 is not set
-# CONFIG_ETRAX_ETHERNET_GBIT is not set
-# CONFIG_ETRAXFS_SERIAL is not set
-# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
-# CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE is not set
-# CONFIG_ETRAX_NANDFLASH is not set
-# CONFIG_ETRAX_CARDBUS is not set
-# CONFIG_ETRAX_IOP_FW_LOAD is not set
-# CONFIG_ETRAX_STREAMCOPROC is not set
-# CONFIG_ETRAX_SPI_MMC is not set
-# CONFIG_ETRAX_SPI_MMC_BOARD is not set
-# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
-CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=0
CONFIG_MTDRAM_ERASE_SIZE=64
CONFIG_MTDRAM_ABS_POS=0x0
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PROFILING is not set
-# CONFIG_SYSTEM_PROFILER is not set
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_NET=y
CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_ETRAX_KGDB is not set
-# CONFIG_ETRAX_WATCHDOG is not set
-
-#
-# Hardware setup
-#
-CONFIG_ETRAX100LX=y
-# CONFIG_ETRAX100LX_V2 is not set
-# CONFIG_SVINTO_SIM is not set
-CONFIG_CRIS_LOW_MAP=y
-CONFIG_ETRAX_DRAM_VIRTUAL_BASE=60000000
-CONFIG_ETRAX_DRAM_SIZE=8
-CONFIG_ETRAX_FLASH_BUSWIDTH=2
-CONFIG_ETRAX_ROOT_DEVICE="/dev/mtdblock3"
-CONFIG_ETRAX_PA_LEDS=y
-# CONFIG_ETRAX_PB_LEDS is not set
-# CONFIG_ETRAX_CSP0_LEDS is not set
-# CONFIG_ETRAX_NO_LEDS is not set
-CONFIG_ETRAX_LED1G=2
CONFIG_ETRAX_LED1R=2
CONFIG_ETRAX_LED2G=2
CONFIG_ETRAX_LED2R=2
-CONFIG_ETRAX_LED3R=2
-CONFIG_ETRAX_LED3G=2
-CONFIG_ETRAX_LED4R=2
-CONFIG_ETRAX_LED4G=2
-CONFIG_ETRAX_LED5R=2
-CONFIG_ETRAX_LED5G=2
-CONFIG_ETRAX_LED6R=2
-CONFIG_ETRAX_LED6G=2
-CONFIG_ETRAX_LED7R=2
-CONFIG_ETRAX_LED7G=2
-CONFIG_ETRAX_LED8Y=2
-CONFIG_ETRAX_LED9Y=2
-CONFIG_ETRAX_LED10Y=2
-CONFIG_ETRAX_LED11Y=2
-CONFIG_ETRAX_LED12R=2
-CONFIG_ETRAX_DEBUG_PORT0=y
-# CONFIG_ETRAX_DEBUG_PORT1 is not set
-# CONFIG_ETRAX_DEBUG_PORT2 is not set
-# CONFIG_ETRAX_DEBUG_PORT3 is not set
-CONFIG_ETRAX_RESCUE_SER0=y
-# CONFIG_ETRAX_RESCUE_SER1 is not set
-# CONFIG_ETRAX_RESCUE_SER2 is not set
-# CONFIG_ETRAX_RESCUE_SER3 is not set
-CONFIG_ETRAX_DEF_R_WAITSTATES=95a6
-CONFIG_ETRAX_DEF_R_BUS_CONFIG=104
-# CONFIG_ETRAX_SDRAM is not set
-CONFIG_ETRAX_DEF_R_DRAM_CONFIG=1a200040
-CONFIG_ETRAX_DEF_R_DRAM_TIMING=5611
CONFIG_ETRAX_DEF_R_PORT_PA_DIR=1d
CONFIG_ETRAX_DEF_R_PORT_PA_DATA=f0
-CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=00
CONFIG_ETRAX_DEF_R_PORT_PB_DIR=1e
CONFIG_ETRAX_DEF_R_PORT_PB_DATA=f3
-# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
-
-#
-# Drivers for ETRAX 100LX built-in interfaces
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
CONFIG_ETRAX_ETHERNET=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
-CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
-# CONFIG_ETRAX_ETHERNET_LPSLAVE is not set
CONFIG_ETRAX_SERIAL=y
CONFIG_ETRAX_SERIAL_PORT0=y
-# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
CONFIG_ETRAX_SERIAL_PORT1=y
-# CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_ON_PB is not set
-# CONFIG_ETRAX_SERIAL_PORT2 is not set
-# CONFIG_ETRAX_SERIAL_PORT3 is not set
-# CONFIG_ETRAX_RS485 is not set
-# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
-# CONFIG_ETRAX_IDE is not set
-CONFIG_ETRAX_AXISFLASHMAP=y
-CONFIG_ETRAX_PTABLE_SECTOR=65536
-CONFIG_MTD=y
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
CONFIG_ETRAX_I2C=y
CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y
-# CONFIG_ETRAX_I2C_EEPROM is not set
CONFIG_ETRAX_GPIO=y
-CONFIG_ETRAX_PA_BUTTON_BITMASK=02
-CONFIG_ETRAX_PA_CHANGEABLE_DIR=00
-CONFIG_ETRAX_PA_CHANGEABLE_BITS=FF
-CONFIG_ETRAX_PB_CHANGEABLE_DIR=00
-CONFIG_ETRAX_PB_CHANGEABLE_BITS=FF
-# CONFIG_ETRAX_USB_HOST is not set
-# CONFIG_USB is not set
-# CONFIG_ETRAX_DS1302 is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
-
-#
-# RAM/ROM Device Drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_MTDRAM is not set
-
-#
-# Linearly Mapped Flash Device Drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_NORA is not set
-# CONFIG_MTD_PNC2000 is not set
-# CONFIG_MTD_RPXLITE is not set
-# CONFIG_MTD_SC520CDP is not set
-# CONFIG_MTD_SBC_MEDIAGX is not set
-# CONFIG_MTD_ELAN_104NC is not set
-# CONFIG_MTD_SA1100 is not set
-# CONFIG_MTD_DC21285 is not set
-# CONFIG_MTD_CSTM_CFI_JEDEC is not set
-# CONFIG_MTD_JEDEC is not set
-# CONFIG_MTD_MIXMEM is not set
-# CONFIG_MTD_OCTAGON is not set
-# CONFIG_MTD_VMAX is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_SPIA is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_FILTER is not set
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-# CONFIG_BLK_DEV_IDE is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_IDEDISK is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Network device support
-#
+CONFIG_ETRAX_AXISFLASHMAP=y
CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_UNIX98_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_JOYSTICK is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_CRAMFS=y
-CONFIG_RAMFS=y
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYSV_FS_WRITE is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_V3 is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_LOCKD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_MOUNT_SUBDIR is not set
-# CONFIG_NCPFS_NDS_DOMAINS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PROFILE is not set
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Mon Dec 3 11:34:27 2007
-#
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NO_IOPORT=y
-CONFIG_FORCE_MAX_ZONEORDER=6
-CONFIG_CRIS=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_GENERIC_HARDIRQS=y
CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc"
-# CONFIG_ETRAX_WATCHDOG is not set
CONFIG_ETRAX_FAST_TIMER=y
-# CONFIG_ETRAX_KMALLOCED_MODULES is not set
-# CONFIG_OOM_REBOOT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-
-#
-# Hardware setup
-#
-# CONFIG_ETRAX100LX is not set
CONFIG_ETRAX100LX_V2=y
-# CONFIG_SVINTO_SIM is not set
-# CONFIG_ETRAXFS is not set
-# CONFIG_CRIS_MACH_ARTPEC3 is not set
-# CONFIG_ETRAX_VCS_SIM is not set
-CONFIG_ETRAX_ARCH_V10=y
-# CONFIG_ETRAX_ARCH_V32 is not set
CONFIG_ETRAX_DRAM_SIZE=32
-CONFIG_ETRAX_FLASH_BUSWIDTH=2
-CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1
CONFIG_ETRAX_FLASH1_SIZE=4
-# CONFIG_ETRAX_DEBUG_PORT0 is not set
-# CONFIG_ETRAX_DEBUG_PORT1 is not set
-# CONFIG_ETRAX_DEBUG_PORT2 is not set
-# CONFIG_ETRAX_DEBUG_PORT3 is not set
CONFIG_ETRAX_DEBUG_PORT_NULL=y
-
-#
-# CRIS v10 options
-#
-CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
-CONFIG_ETRAX_PA_LEDS=y
-# CONFIG_ETRAX_PB_LEDS is not set
-# CONFIG_ETRAX_CSP0_LEDS is not set
-# CONFIG_ETRAX_NO_LEDS is not set
-CONFIG_ETRAX_LED1G=2
-CONFIG_ETRAX_LED1R=3
-CONFIG_ETRAX_LED2G=4
-CONFIG_ETRAX_LED2R=5
-CONFIG_ETRAX_LED3G=2
-CONFIG_ETRAX_LED3R=2
-CONFIG_ETRAX_RESCUE_SER0=y
-# CONFIG_ETRAX_RESCUE_SER1 is not set
-# CONFIG_ETRAX_RESCUE_SER2 is not set
-# CONFIG_ETRAX_RESCUE_SER3 is not set
-CONFIG_ETRAX_DEF_R_WAITSTATES=95a6
-CONFIG_ETRAX_DEF_R_BUS_CONFIG=104
-# CONFIG_ETRAX_SDRAM is not set
-CONFIG_ETRAX_DEF_R_DRAM_CONFIG=1a200040
-CONFIG_ETRAX_DEF_R_DRAM_TIMING=5611
-CONFIG_ETRAX_DEF_R_PORT_PA_DIR=1c
-CONFIG_ETRAX_DEF_R_PORT_PA_DATA=00
-CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=00
-CONFIG_ETRAX_DEF_R_PORT_PB_DIR=00
-CONFIG_ETRAX_DEF_R_PORT_PB_DATA=ff
-# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Drivers for built-in interfaces
-#
CONFIG_ETRAX_ETHERNET=y
CONFIG_ETRAX_SERIAL=y
-# CONFIG_ETRAX_SERIAL_FAST_TIMER is not set
-# CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set
-CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5
-# CONFIG_ETRAX_SERIAL_PORT0 is not set
-# CONFIG_ETRAX_SERIAL_PORT1 is not set
-# CONFIG_ETRAX_SERIAL_PORT2 is not set
-# CONFIG_ETRAX_SERIAL_PORT3 is not set
-# CONFIG_ETRAX_RS485 is not set
-# CONFIG_ETRAX_IDE is not set
-# CONFIG_ETRAX_USB_HOST is not set
CONFIG_ETRAX_AXISFLASHMAP=y
-CONFIG_ETRAX_PTABLE_SECTOR=65536
-# CONFIG_ETRAX_I2C is not set
-# CONFIG_ETRAX_GPIO is not set
-# CONFIG_ETRAX_RTC is not set
-# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
-CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=0
CONFIG_MTDRAM_ERASE_SIZE=64
CONFIG_MTDRAM_ABS_POS=0x0
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PROFILING is not set
-# CONFIG_SYSTEM_PROFILER is not set
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Fri Nov 30 14:24:26 2007
-#
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NO_IOPORT=y
-CONFIG_FORCE_MAX_ZONEORDER=6
-CONFIG_CRIS=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_GENERIC_HARDIRQS=y
CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc"
-# CONFIG_ETRAX_WATCHDOG is not set
CONFIG_ETRAX_FAST_TIMER=y
-# CONFIG_ETRAX_KMALLOCED_MODULES is not set
-# CONFIG_OOM_REBOOT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-
-#
-# Hardware setup
-#
-# CONFIG_ETRAX100LX is not set
-# CONFIG_ETRAX100LX_V2 is not set
-# CONFIG_SVINTO_SIM is not set
CONFIG_ETRAXFS=y
-# CONFIG_CRIS_MACH_ARTPEC3 is not set
-# CONFIG_ETRAX_VCS_SIM is not set
-# CONFIG_ETRAX_ARCH_V10 is not set
-CONFIG_ETRAX_ARCH_V32=y
CONFIG_ETRAX_DRAM_SIZE=32
-CONFIG_ETRAX_FLASH_BUSWIDTH=2
-CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1
CONFIG_ETRAX_FLASH1_SIZE=4
-CONFIG_ETRAX_DEBUG_PORT0=y
-# CONFIG_ETRAX_DEBUG_PORT1 is not set
-# CONFIG_ETRAX_DEBUG_PORT2 is not set
-# CONFIG_ETRAX_DEBUG_PORT3 is not set
-# CONFIG_ETRAX_DEBUG_PORT_NULL is not set
-CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
-
-#
-# ETRAX FS options
-#
-CONFIG_ETRAX_SERIAL_PORTS=4
-CONFIG_ETRAX_MEM_GRP1_CONFIG=4044a
-CONFIG_ETRAX_MEM_GRP2_CONFIG=0
-CONFIG_ETRAX_MEM_GRP3_CONFIG=0
-CONFIG_ETRAX_MEM_GRP4_CONFIG=0
-CONFIG_ETRAX_SDRAM_GRP0_CONFIG=336
-CONFIG_ETRAX_SDRAM_GRP1_CONFIG=0
-CONFIG_ETRAX_SDRAM_TIMING=104a
-CONFIG_ETRAX_SDRAM_COMMAND=0
-CONFIG_ETRAX_DEF_GIO_PA_OE=1c
-CONFIG_ETRAX_DEF_GIO_PA_OUT=00
-CONFIG_ETRAX_DEF_GIO_PB_OE=00000
-CONFIG_ETRAX_DEF_GIO_PB_OUT=00000
-CONFIG_ETRAX_DEF_GIO_PC_OE=00000
-CONFIG_ETRAX_DEF_GIO_PC_OUT=00000
-CONFIG_ETRAX_DEF_GIO_PD_OE=00000
-CONFIG_ETRAX_DEF_GIO_PD_OUT=00000
-CONFIG_ETRAX_DEF_GIO_PE_OE=00000
-CONFIG_ETRAX_DEF_GIO_PE_OUT=00000
-# CONFIG_CPU_FREQ is not set
-# CONFIG_ETRAX_NBR_LED_GRP_ZERO is not set
-CONFIG_ETRAX_NBR_LED_GRP_ONE=y
-# CONFIG_ETRAX_NBR_LED_GRP_TWO is not set
-CONFIG_ETRAX_LED_G_NET0="PA3"
-CONFIG_ETRAX_LED_R_NET0="PA4"
-CONFIG_ETRAX_V32_LED2G="PA5"
-CONFIG_ETRAX_V32_LED2R="PA6"
-CONFIG_ETRAX_V32_LED3G="PA7"
-CONFIG_ETRAX_V32_LED3R="PA7"
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Drivers for built-in interfaces
-#
CONFIG_ETRAX_ETHERNET=y
-# CONFIG_ETRAX_IDE is not set
CONFIG_ETRAX_AXISFLASHMAP=y
-CONFIG_ETRAX_PTABLE_SECTOR=65536
-# CONFIG_ETRAX_I2C is not set
-# CONFIG_ETRAX_GPIO is not set
-# CONFIG_ETRAX_NO_PHY is not set
-# CONFIG_ETRAX_ETHERNET_IFACE0 is not set
-# CONFIG_ETRAX_ETHERNET_IFACE1 is not set
-# CONFIG_ETRAXFS_SERIAL is not set
-# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
-# CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE is not set
-# CONFIG_ETRAX_NANDFLASH is not set
-# CONFIG_ETRAX_CARDBUS is not set
-# CONFIG_ETRAX_IOP_FW_LOAD is not set
-# CONFIG_ETRAX_STREAMCOPROC is not set
-# CONFIG_ETRAX_SPI_MMC is not set
-# CONFIG_ETRAX_SPI_MMC_BOARD is not set
-# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
-CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=0
CONFIG_MTDRAM_ERASE_SIZE=64
CONFIG_MTDRAM_ABS_POS=0x0
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PROFILING is not set
-# CONFIG_SYSTEM_PROFILER is not set
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_DMA=y
header-y += arch-v32/
header-y += ethernet.h
+header-y += etraxgpio.h
+header-y += rs485.h
header-y += rtc.h
header-y += sync_serial.h
-
-unifdef-y += etraxgpio.h
-unifdef-y += rs485.h
return 0;
}
-static inline int
-dma_get_cache_alignment(void)
-{
- return (1 << INTERNODE_CACHE_SHIFT);
-}
-
-#define dma_is_consistent(d, h) (1)
-
static inline void
dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
#define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %p(%08lx).\n", __FILE__, __LINE__, &(e), pgd_val(e))
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* defined in head.S */
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0x1fffffff)
-
#endif /* !(__ASM_CRIS_SCATTERLIST_H) */
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11.8
-# Fri May 13 17:16:03 2005
-#
-CONFIG_FRV=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_GENERIC_CALIBRATE_DELAY is not set
-# CONFIG_GENERIC_HARDIRQS is not set
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
+CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Fujitsu FR-V system setup
-#
+CONFIG_EMBEDDED=y
+# CONFIG_HOTPLUG is not set
CONFIG_MMU=y
CONFIG_FRV_OUTOFLINE_ATOMIC_OPS=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FRV_DEFL_CACHE_WBACK is not set
-# CONFIG_FRV_DEFL_CACHE_WBEHIND is not set
CONFIG_FRV_DEFL_CACHE_WTHRU=y
-# CONFIG_FRV_DEFL_CACHE_DISABLED is not set
-
-#
-# CPU core support
-#
-CONFIG_CPU_FR451=y
-CONFIG_CPU_FR451_COMPILE=y
-CONFIG_FRV_L1_CACHE_SHIFT=5
-CONFIG_MB93091_VDK=y
-# CONFIG_MB93093_PDK is not set
-CONFIG_MB93090_MB00=y
-# CONFIG_MB93091_NO_MB is not set
-# CONFIG_GPREL_DATA_8 is not set
CONFIG_GPREL_DATA_4=y
-# CONFIG_GPREL_DATA_NONE is not set
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCMCIA is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Executable formats
-#
-# CONFIG_BINFMT_ELF is not set
-CONFIG_BINFMT_ELF_FDPIC=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-# CONFIG_FORK_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_KGDBOE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISER4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_EARLY_PRINTK is not set
CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_GDBSTUB is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
include include/asm-generic/Kbuild.asm
header-y += registers.h
-
-unifdef-y += termios.h
+header-y += termios.h
return 0;
}
-static inline
-int dma_get_cache_alignment(void)
-{
- return 1 << L1_CACHE_SHIFT;
-}
-
-#define dma_is_consistent(d, h) (1)
-
static inline
void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
* the slab must be aligned such that load- and store-double instructions don't
* fault if used
*/
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES
/*****************************************************************************/
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0xffffffffUL)
-
#endif /* !_ASM_SCATTERLIST_H */
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
/*
* sys_execve() executes a new program.
*/
-asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp)
+asmlinkage int sys_execve(const char __user *name,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp)
{
int error;
char * filename;
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc1
-# Fri Feb 15 17:13:14 2008
-#
-CONFIG_H8300=y
-# CONFIG_MMU is not set
-# CONFIG_SWAP is not set
-CONFIG_ZONE_DMA=y
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_ISA=y
-# CONFIG_PCI is not set
-CONFIG_HZ=100
-CONFIG_C_SYMBOL_PREFIX=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-
-#
-# Processor type and features
-#
-CONFIG_H8300H_GENERIC=y
-# CONFIG_H8300H_AKI3068NET is not set
-# CONFIG_H8300H_H8MAX is not set
-# CONFIG_H8300H_SIM is not set
-# CONFIG_H8S_GENERIC is not set
-# CONFIG_H8S_EDOSK2674 is not set
-# CONFIG_H8S_SIM is not set
-
-#
-# Detail Selection
-#
-# CONFIG_H83002 is not set
CONFIG_H83007=y
-# CONFIG_H83048 is not set
-# CONFIG_H83068 is not set
-CONFIG_CPU_CLOCK=20000
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_CPU_H8300H=y
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-
-#
-# Executable file formats
-#
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
# CONFIG_BLK_DEV is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-
-#
-# Unix98 PTY support
-#
-# CONFIG_UNIX98_PTYS is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_I2C is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_FULLDEBUG is not set
-# CONFIG_HIGHPROFILE is not set
-# CONFIG_NO_KERNEL_MSG is not set
-# CONFIG_SYSCALL_PRINT is not set
-# CONFIG_GDB_DEBUG is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DEFAULT_CMDLINE is not set
-# CONFIG_BLKDEV_RESERVE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
#endif /* !(_H8300_SCATTERLIST_H) */
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
/*
* sys_execve() executes a new program.
*/
-asmlinkage int sys_execve(char *name, char **argv, char **envp,int dummy,...)
+asmlinkage int sys_execve(const char *name,
+ const char *const *argv,
+ const char *const *envp,
+ int dummy, ...)
{
int error;
char * filename;
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
register long res __asm__("er0");
register char *const *_c __asm__("er3") = envp;
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_IA64_DIG=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PREEMPT=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_EFI_VARS=y
+CONFIG_BINFMT_MISC=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
-CONFIG_AGP_I460=m
-CONFIG_AGP=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_AUTOFS_FS=m
-CONFIG_BINFMT_MISC=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_IDECD=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CIFS=m
-CONFIG_CIFS_POSIX=y
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_ZERO=m
-CONFIG_DRM=m
-CONFIG_DRM_R128=m
-CONFIG_DUMMY=y
-CONFIG_EFI_PARTITION=y
-CONFIG_EFI_RTC=y
-CONFIG_EFI_VARS=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_HUGETLBFS=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C=y
-CONFIG_IA64_DIG=y
-CONFIG_IA64_PALINFO=y
CONFIG_IDE=m
-CONFIG_INET=y
-CONFIG_INOTIFY=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_IPV6 is not set
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_GENERIC=m
+CONFIG_BLK_DEV_PIIX=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
-CONFIG_MD_MULTIPATH=m
CONFIG_MD_RAID0=m
-CONFIG_MD_RAID10=m
CONFIG_MD_RAID1=m
-CONFIG_MD=y
-CONFIG_MII=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
+CONFIG_MD_RAID10=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
CONFIG_NET_PCI=y
-CONFIG_NET=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_NR_CPUS=2
-CONFIG_OPROFILE=y
-CONFIG_PACKET=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_PERFMON=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_PREEMPT=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROFILING=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250=y
-CONFIG_SGI_PARTITION=y
-CONFIG_SMP=y
-CONFIG_SND_CS4281=m
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_DRM=m
+CONFIG_DRM_R128=m
+CONFIG_SOUND=m
CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SOUND=m
-CONFIG_SYSVIPC=y
-CONFIG_TMPFS=y
-CONFIG_UDF_FS=m
-CONFIG_UNIX=y
-CONFIG_USB_ACM=m
-CONFIG_USB_DEVICEFS=y
+CONFIG_SND_CS4281=m
CONFIG_USB_HIDDEV=y
CONFIG_USB=m
+CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=m
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
-CONFIG_USB_UHCI_HCD=m
-CONFIG_VFAT_FS=y
-# CONFIG_VIRTUAL_MEM_MAP is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
CONFIG_XFS_FS=y
-CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SGI_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_CGROUPS=y
+CONFIG_CPUSETS=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_MCKINLEY=y
+CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_IA64_CYCLONE=y
+CONFIG_SMP=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
+CONFIG_EFI_VARS=y
+CONFIG_BINFMT_MISC=m
+CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_CONTAINER=m
-CONFIG_ACPI_DOCK=y
CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_PROCFS=y
-CONFIG_AGP_HP_ZX1=m
-CONFIG_AGP_I460=m
-CONFIG_AGP=m
-CONFIG_AGP_SGI_TIOCA=m
+CONFIG_ACPI_CONTAINER=m
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
CONFIG_ARPD=y
-CONFIG_ATA_PIIX=y
-CONFIG_ATA=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_AUTOFS_FS=m
-CONFIG_BINFMT_MISC=m
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_CONNECTOR=y
+# CONFIG_PNP_DEBUG_MESSAGES is not set
CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
+CONFIG_SGI_IOC4=y
+CONFIG_SGI_XP=m
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_SGIIOC4=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
-CONFIG_CGROUPS=y
CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CIFS=m
-CONFIG_CONNECTOR=y
-CONFIG_CPUSETS=y
-CONFIG_CRASH_DUMP=y
-CONFIG_CRC_T10DIF=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_VITESSE=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_MULTIPATH=m
CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=m
+CONFIG_NET_PCI=y
+CONFIG_E100=m
+CONFIG_E1000=y
+CONFIG_IGB=y
+CONFIG_TIGON3=y
+CONFIG_NETCONSOLE=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_GAMEPORT=m
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_SGI_SNSC=y
+CONFIG_SGI_TIOCX=y
+CONFIG_SGI_MBCS=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+CONFIG_SERIAL_SGI_IOC4=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+CONFIG_RAW_DRIVER=m
+CONFIG_HPET=y
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_SGI_TIOCA=m
CONFIG_DRM=m
-CONFIG_DRM_MGA=m
+CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
-CONFIG_DRM_TDFX=m
-CONFIG_DUMMY=m
-CONFIG_E1000=y
-CONFIG_E100=m
-CONFIG_EFI_PARTITION=y
-CONFIG_EFI_RTC=y
-CONFIG_EFI_VARS=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_FUSION_FC=m
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION=y
-CONFIG_GAMEPORT=m
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_FM801=m
CONFIG_HID_GYRATION=m
CONFIG_HID_PANTHERLORD=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI=m
-CONFIG_HPET=y
-CONFIG_HUGETLBFS=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_IA64_CYCLONE=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_IA64_PALINFO=y
-CONFIG_IDE=y
-CONFIG_IGB=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IKCONFIG=y
-CONFIG_INET=y
-CONFIG_INFINIBAND_IPOIB=m
+CONFIG_USB=m
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_STORAGE=m
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INOTIFY=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IPV6 is not set
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_MSPEC=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_XFS_FS=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KEXEC=y
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MCKINLEY=y
-CONFIG_MD_LINEAR=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MSPEC=m
-CONFIG_NETCONSOLE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NET_TULIP=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
+CONFIG_UDF_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SGI_PARTITION=y
+CONFIG_EFI_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-CONFIG_NTFS_FS=m
-CONFIG_PACKET=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_PERFMON=y
-# CONFIG_PNP_DEBUG_MESSAGES is not set
-CONFIG_POSIX_MQUEUE=y
-CONFIG_PROC_KCORE=y
-CONFIG_RAW_DRIVER=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS=y
-CONFIG_SATA_VITESSE=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_SGI_IOC4=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SGI_IOC4=y
-CONFIG_SGI_MBCS=m
-CONFIG_SGI_PARTITION=y
-CONFIG_SGI_SNSC=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SGI_XP=m
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMP=y
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_DUMMY=m
-CONFIG_SND_EMU10K1=m
-CONFIG_SND_FM801=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_VIRMIDI=m
-CONFIG_SOUND=m
-CONFIG_SYN_COOKIES=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SYSVIPC=y
-CONFIG_TIGON3=y
-CONFIG_TMPFS=y
-CONFIG_TULIP=m
-CONFIG_UDF_FS=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_UNIX=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB=m
-CONFIG_USB_MON=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_UHCI_HCD=m
-CONFIG_VFAT_FS=y
-CONFIG_XFS_FS=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MCKINLEY=y
+CONFIG_IA64_CYCLONE=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=512
+CONFIG_HOTPLUG_CPU=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_SGI_IOC3=y
+CONFIG_EFI_VARS=y
+CONFIG_BINFMT_MISC=m
CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
-CONFIG_AGP_HP_ZX1=m
-CONFIG_AGP_I460=m
-CONFIG_AGP=m
-CONFIG_AGP_SGI_TIOCA=m
+CONFIG_ACPI_CONTAINER=m
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
CONFIG_ARPD=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_AUTOFS_FS=y
-CONFIG_BINFMT_MISC=m
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
+CONFIG_SGI_IOC4=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_SGIIOC4=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CIFS=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_MULTIPATH=m
CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=m
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=m
+CONFIG_NET_PCI=y
+CONFIG_E100=m
+CONFIG_E1000=y
+CONFIG_TIGON3=y
+CONFIG_NETCONSOLE=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_GAMEPORT=m
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_SGI_SNSC=y
+CONFIG_SGI_TIOCX=y
+CONFIG_SGI_MBCS=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+CONFIG_SERIAL_SGI_IOC4=y
+CONFIG_SERIAL_SGI_IOC3=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+CONFIG_RAW_DRIVER=m
+CONFIG_HPET=y
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_SGI_TIOCA=m
CONFIG_DRM=m
-CONFIG_DRM_MGA=m
+CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
-CONFIG_DRM_TDFX=m
-CONFIG_DUMMY=m
-CONFIG_E1000=y
-CONFIG_E100=m
-CONFIG_EFI_PARTITION=y
-CONFIG_EFI_RTC=y
-CONFIG_EFI_VARS=y
-CONFIG_EXPERIMENTAL=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_FM801=m
+CONFIG_USB=m
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_STORAGE=m
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_FUSION_FC=m
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION=y
-CONFIG_GAMEPORT=m
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI=m
-CONFIG_HPET=y
-CONFIG_HUGETLBFS=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_IA64_CYCLONE=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_IA64_PALINFO=y
-CONFIG_IDE_GENERIC=y
-CONFIG_IDE=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IKCONFIG=y
-CONFIG_INET=y
-CONFIG_INFINIBAND_IPOIB=m
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INOTIFY=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IPV6 is not set
+CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_XFS_FS=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MCKINLEY=y
-CONFIG_MD_LINEAR=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_NETCONSOLE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NET_TULIP=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
+CONFIG_UDF_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SGI_PARTITION=y
+CONFIG_EFI_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-CONFIG_NR_CPUS=512
-CONFIG_NTFS_FS=m
-CONFIG_PACKET=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_PERFMON=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_PROC_KCORE=y
-CONFIG_RAW_DRIVER=m
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_SGI_IOC3=y
-CONFIG_SERIAL_SGI_IOC4=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SGI_IOC3=y
-CONFIG_SGI_IOC4=y
-CONFIG_SGI_MBCS=m
-CONFIG_SGI_PARTITION=y
-CONFIG_SGI_SNSC=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMP=y
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_DUMMY=m
-CONFIG_SND_EMU10K1=m
-CONFIG_SND_FM801=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_VIRMIDI=m
-CONFIG_SOUND=m
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SYN_COOKIES=y
-CONFIG_SYSVIPC=y
-CONFIG_TIGON3=y
-CONFIG_TMPFS=y
-CONFIG_TULIP=m
-CONFIG_UDF_FS=m
-CONFIG_UNIX=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB=m
-CONFIG_USB_MON=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_UHCI_HCD=m
-CONFIG_VFAT_FS=y
-CONFIG_XFS_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_CRYPTO_MD5=y
-CONFIG_BINFMT_MISC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_EFI_PARTITION=y
-CONFIG_EFI_RTC=y
-CONFIG_EFI_VARS=y
CONFIG_EXPERIMENTAL=y
-CONFIG_EXT2_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_HP_SIMETH=y
-CONFIG_HP_SIMSCSI=y
-CONFIG_HP_SIMSERIAL_CONSOLE=y
-CONFIG_HP_SIMSERIAL=y
-CONFIG_HUGETLBFS=y
-CONFIG_IA64_HP_SIM=y
-CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_IA64_PALINFO=m
-CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
-CONFIG_INET=y
-CONFIG_INOTIFY=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_IP_MULTICAST=y
-# CONFIG_IPV6 is not set
-# CONFIG_LEGACY_PTYS is not set
+CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_MCKINLEY=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-CONFIG_NET=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD=y
-CONFIG_NFS_FS=y
+CONFIG_IA64_HP_SIM=y
+CONFIG_MCKINLEY=y
+CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_SMP=y
CONFIG_NR_CPUS=64
-CONFIG_PACKET=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_PREEMPT=y
-CONFIG_PROC_KCORE=y
+CONFIG_IA64_PALINFO=m
+CONFIG_EFI_VARS=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IPV6 is not set
+# CONFIG_STANDALONE is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO_I8042 is not set
-CONFIG_SMP=y
-# CONFIG_STANDALONE is not set
-CONFIG_SYSVIPC=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_EFI_RTC=y
# CONFIG_VGA_CONSOLE is not set
+CONFIG_HP_SIMETH=y
+CONFIG_HP_SIMSERIAL=y
+CONFIG_HP_SIMSERIAL_CONSOLE=y
+CONFIG_HP_SIMSCSI=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_PROC_KCORE=y
+CONFIG_HUGETLBFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_EFI_PARTITION=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_INFO=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_IA64_DIG=y
+CONFIG_MCKINLEY=y
+CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_IA64_CYCLONE=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PERMIT_BSP_REMOVE=y
+CONFIG_FORCE_CPEI_RETARGET=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_KEXEC=y
+CONFIG_EFI_VARS=y
+CONFIG_BINFMT_MISC=m
+CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_PROCFS=y
-CONFIG_AGP_I460=m
-CONFIG_AGP=m
+CONFIG_ACPI_CONTAINER=m
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
CONFIG_ARPD=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_AUTOFS_FS=y
-CONFIG_BINFMT_MISC=m
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CIFS=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
-CONFIG_DM_MIRROR=m
CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_CTL=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=m
+CONFIG_NET_PCI=y
+CONFIG_E100=m
+CONFIG_E1000=y
+CONFIG_TIGON3=y
+CONFIG_NETCONSOLE=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_GAMEPORT=m
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+CONFIG_RAW_DRIVER=m
+CONFIG_HPET=y
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
CONFIG_DRM=m
-CONFIG_DRM_MGA=m
+CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
-CONFIG_DRM_TDFX=m
-CONFIG_DUMMY=m
-CONFIG_E1000=y
-CONFIG_E100=m
-CONFIG_EFI_PARTITION=y
-CONFIG_EFI_RTC=y
-CONFIG_EFI_VARS=y
-CONFIG_EXPERIMENTAL=y
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_FORCE_CPEI_RETARGET=y
-CONFIG_FUSION_CTL=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION=y
-CONFIG_GAMEPORT=m
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI=m
-CONFIG_HPET=y
-CONFIG_HUGETLBFS=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_IA64_CYCLONE=y
-CONFIG_IA64_DIG=y
-CONFIG_IA64_GRANULE_16MB=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_IA64_PALINFO=y
-CONFIG_IDE=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IKCONFIG=y
-CONFIG_INET=y
-CONFIG_INOTIFY=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IPV6 is not set
+CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_XFS_FS=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KEXEC=y
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MCKINLEY=y
-CONFIG_MD_LINEAR=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_NETCONSOLE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NET_TULIP=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
+CONFIG_UDF_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SGI_PARTITION=y
+CONFIG_EFI_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-CONFIG_NR_CPUS=16
-CONFIG_NTFS_FS=m
-CONFIG_PACKET=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_PERFMON=y
-CONFIG_PERMIT_BSP_REMOVE=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_PROC_KCORE=y
-CONFIG_RAW_DRIVER=m
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS=y
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SGI_PARTITION=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_SYSVIPC=y
-CONFIG_TIGON3=y
-CONFIG_TMPFS=y
-CONFIG_TULIP=m
-CONFIG_UDF_FS=m
-CONFIG_UNIX=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB=y
-CONFIG_VFAT_FS=y
-CONFIG_XFS_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_IA64_GRANULE_16MB=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARAVIRT_GUEST=y
+CONFIG_IA64_XEN_GUEST=y
+CONFIG_MCKINLEY=y
+CONFIG_IA64_CYCLONE=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PERMIT_BSP_REMOVE=y
+CONFIG_FORCE_CPEI_RETARGET=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_KEXEC=y
+CONFIG_EFI_VARS=y
+CONFIG_BINFMT_MISC=m
+CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_PROCFS=y
-CONFIG_AGP=m
+CONFIG_ACPI_CONTAINER=m
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
CONFIG_ARPD=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_AUTOFS_FS=y
-CONFIG_BINFMT_MISC=m
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CIFS=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
-CONFIG_DM_MIRROR=m
CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_CTL=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=m
+CONFIG_NET_PCI=y
+CONFIG_E100=m
+CONFIG_E1000=y
+CONFIG_TIGON3=y
+CONFIG_NETCONSOLE=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_GAMEPORT=m
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+CONFIG_RAW_DRIVER=m
+CONFIG_HPET=y
+CONFIG_AGP=m
CONFIG_DRM=m
-CONFIG_DRM_MGA=m
+CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
-CONFIG_DRM_TDFX=m
-CONFIG_DUMMY=m
-CONFIG_E1000=y
-CONFIG_E100=m
-CONFIG_EFI_PARTITION=y
-CONFIG_EFI_RTC=y
-CONFIG_EFI_VARS=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_FORCE_CPEI_RETARGET=y
-CONFIG_FUSION_CTL=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION=y
-CONFIG_GAMEPORT=m
CONFIG_HID_GYRATION=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_TOPSEED=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI=m
-CONFIG_HPET=y
-CONFIG_HUGETLBFS=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_IA64_CYCLONE=y
-CONFIG_IA64_GRANULE_16MB=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_IA64_PALINFO=y
-CONFIG_IA64_XEN_GUEST=y
-CONFIG_IDE=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IKCONFIG=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET=y
-CONFIG_INOTIFY=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IPV6 is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_XFS_FS=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KEXEC=y
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MCKINLEY=y
-CONFIG_MD_LINEAR=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_NETCONSOLE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NET_TULIP=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
+CONFIG_UDF_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SGI_PARTITION=y
+CONFIG_EFI_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-CONFIG_NR_CPUS=16
-CONFIG_NTFS_FS=m
-CONFIG_PACKET=y
-CONFIG_PARAVIRT_GUEST=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_PERFMON=y
-CONFIG_PERMIT_BSP_REMOVE=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_PROC_KCORE=y
-CONFIG_RAW_DRIVER=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS=y
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SGI_PARTITION=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SYSVIPC=y
-CONFIG_TIGON3=y
-CONFIG_TMPFS=y
-CONFIG_TULIP=m
-CONFIG_UDF_FS=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_UNIX=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB=y
-CONFIG_VFAT_FS=y
-CONFIG_XFS_FS=y
+CONFIG_IA64_GRANULE_16MB=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_ACPI_PROCFS=y
-CONFIG_AGP_HP_ZX1=y
-CONFIG_AGP=y
-CONFIG_AUTOFS_FS=y
-CONFIG_BINFMT_MISC=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_IDECD=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_IA64_HP_ZX1=y
+CONFIG_MCKINLEY=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_HOTPLUG_CPU=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_CRASH_DUMP=y
+CONFIG_EFI_VARS=y
+CONFIG_BINFMT_MISC=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CRASH_DUMP=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DRM_RADEON=y
-CONFIG_DRM=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_CTL=m
+CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-CONFIG_E1000=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=y
+CONFIG_TULIP_MWI=y
+CONFIG_TULIP_MMIO=y
+CONFIG_TULIP_NAPI=y
+CONFIG_TULIP_NAPI_HW_MITIGATION=y
+CONFIG_NET_PCI=y
CONFIG_E100=y
-CONFIG_EFI_PARTITION=y
-CONFIG_EFI_RTC=y
-CONFIG_EFI_VARS=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_FB_RADEON_DEBUG=y
-CONFIG_FB_RADEON=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HUGETLBFS=y
-# CONFIG_HWMON is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_IA64_HP_ZX1=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_IA64_PALINFO=y
-CONFIG_IA64_PRINT_HAZARDS=y
-CONFIG_IDE=y
-CONFIG_INET=y
-CONFIG_INPUT_EVDEV=y
+CONFIG_E1000=y
+CONFIG_TIGON3=y
CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-CONFIG_IP_MULTICAST=y
-# CONFIG_IPV6 is not set
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_KPROBES=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_AGP=y
+CONFIG_AGP_HP_ZX1=y
+CONFIG_DRM=y
+CONFIG_DRM_RADEON=y
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_DEBUG=y
+CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MCKINLEY=y
-CONFIG_MODULES=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_FM801=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+CONFIG_AUTOFS_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=y
CONFIG_MSDOS_FS=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NETFILTER=y
-CONFIG_NET_PCI=y
-CONFIG_NET_TULIP=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
-CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_EFI_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
-CONFIG_NR_CPUS=16
-CONFIG_PACKET=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_PERFMON=y
-CONFIG_PROC_KCORE=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SMP=y
-CONFIG_SND_FM801=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND=y
-CONFIG_SOUND=y
-CONFIG_SYSVIPC=y
-CONFIG_TIGON3=y
-CONFIG_TMPFS=y
-CONFIG_TULIP_MMIO=y
-CONFIG_TULIP_MWI=y
-CONFIG_TULIP_NAPI_HW_MITIGATION=y
-CONFIG_TULIP_NAPI=y
-CONFIG_TULIP=y
-CONFIG_UDF_FS=y
-CONFIG_UNIX=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB=y
-CONFIG_VFAT_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_IA64_PRINT_HAZARDS=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
header-y += break.h
header-y += fpu.h
+header-y += gcc_intrin.h
header-y += ia64regs.h
header-y += intel_intrin.h
+header-y += intrinsics.h
+header-y += perfmon.h
header-y += perfmon_default_smpl.h
header-y += ptrace_offsets.h
header-y += rse.h
header-y += ucontext.h
-
-unifdef-y += gcc_intrin.h
-unifdef-y += intrinsics.h
-unifdef-y += perfmon.h
-unifdef-y += ustack.h
+header-y += ustack.h
return new;
}
-static __inline__ int
+static __inline__ long
ia64_atomic64_add (__s64 i, atomic64_t *v)
{
__s64 old, new;
return new;
}
-static __inline__ int
+static __inline__ long
ia64_atomic64_sub (__s64 i, atomic64_t *v)
{
__s64 old, new;
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+static __inline__ long atomic64_add_unless(atomic64_t *v, long a, long u)
{
long c, old;
c = atomic64_read(v);
return atomic_add_return(i, v) < 0;
}
-static __inline__ int
+static __inline__ long
atomic64_add_negative (__s64 i, atomic64_t *v)
{
return atomic64_add_return(i, v) < 0;
return daddr;
}
-extern int dma_get_cache_alignment(void);
-
static inline void
dma_cache_sync (struct device *dev, void *vaddr, size_t size,
enum dma_data_direction dir)
mb();
}
-#define dma_is_consistent(d, h) (1) /* all we do is coherent memory... */
-
#endif /* _ASM_IA64_DMA_MAPPING_H */
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
};
#define RWSEM_UNLOCKED_VALUE __IA64_UL_CONST(0x0000000000000000)
-#define RWSEM_ACTIVE_BIAS __IA64_UL_CONST(0x0000000000000001)
-#define RWSEM_ACTIVE_MASK __IA64_UL_CONST(0x00000000ffffffff)
-#define RWSEM_WAITING_BIAS -__IA64_UL_CONST(0x0000000100000000)
+#define RWSEM_ACTIVE_BIAS (1L)
+#define RWSEM_ACTIVE_MASK (0xffffffffL)
+#define RWSEM_WAITING_BIAS (-0x100000000L)
#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
#define _ASM_IA64_SCATTERLIST_H
#include <asm-generic/scatterlist.h>
-/*
- * It used to be that ISA_DMA_THRESHOLD had something to do with the
- * DMA-limits of ISA-devices. Nowadays, its only remaining use (apart
- * from the aha1542.c driver, which isn't 64-bit clean anyhow) is to
- * tell the block-layer (via BLK_BOUNCE_ISA) what the max. physical
- * address of a page is that is allocated with GFP_DMA. On IA-64,
- * that's 4GB - 1.
- */
-#define ISA_DMA_THRESHOLD 0xffffffff
#define ARCH_HAS_SG_CHAIN
#endif /* _ASM_IA64_SCATTERLIST_H */
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
#define __NR_pwritev 1320
#define __NR_rt_tgsigqueueinfo 1321
#define __NR_recvmmsg 1322
+#define __NR_fanotify_init 1323
+#define __NR_fanotify_mark 1324
+#define __NR_prlimit64 1325
#ifdef __KERNEL__
-#define NR_syscalls 299 /* length of syscall table */
+#define NR_syscalls 302 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
int fd, long pgoff);
struct pt_regs;
struct sigaction;
-long sys_execve(char __user *filename, char __user * __user *argv,
- char __user * __user *envp, struct pt_regs *regs);
asmlinkage long sys_ia64_pipe(void);
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
data8 sys_pwritev // 1320
data8 sys_rt_tgsigqueueinfo
data8 sys_recvmmsg
+ data8 sys_fanotify_init
+ data8 sys_fanotify_mark
+ data8 sys_prlimit64 // 1325
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
return 1;
}
+static char *pfmfs_dname(struct dentry *dentry, char *buffer, int buflen)
+{
+ return dynamic_dname(dentry, buffer, buflen, "pfm:[%lu]",
+ dentry->d_inode->i_ino);
+}
+
static const struct dentry_operations pfmfs_dentry_operations = {
.d_delete = pfmfs_delete_dentry,
+ .d_dname = pfmfs_dname,
};
struct file *file;
struct inode *inode;
struct path path;
- char name[32];
- struct qstr this;
+ struct qstr this = { .name = "" };
/*
* allocate a new inode
inode->i_uid = current_fsuid();
inode->i_gid = current_fsgid();
- sprintf(name, "[%lu]", inode->i_ino);
- this.name = name;
- this.len = strlen(name);
- this.hash = inode->i_ino;
-
/*
* allocate a new dcache entry
*/
}
long
-sys_execve (char __user *filename, char __user * __user *argv, char __user * __user *envp,
+sys_execve (const char __user *filename,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp,
struct pt_regs *regs)
{
char *fname;
unsigned long ia64_max_cacheline_size;
-int dma_get_cache_alignment(void)
-{
- return ia64_max_cacheline_size;
-}
-EXPORT_SYMBOL(dma_get_cache_alignment);
-
unsigned long ia64_iobase; /* virtual address for I/O accesses */
EXPORT_SYMBOL(ia64_iobase);
struct io_space io_space[MAX_IO_SPACES];
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:35 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-# CONFIG_PLAT_MAPPI is not set
-# CONFIG_PLAT_USRV is not set
-# CONFIG_PLAT_M32700UT is not set
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
-# CONFIG_PLAT_MAPPI2 is not set
-# CONFIG_PLAT_MAPPI3 is not set
CONFIG_PLAT_M32104UT=y
-# CONFIG_CHIP_M32700 is not set
-# CONFIG_CHIP_M32102 is not set
CONFIG_CHIP_M32104=y
-# CONFIG_CHIP_VDEC2 is not set
-# CONFIG_CHIP_OPSP is not set
-CONFIG_ISA_M32R=y
-CONFIG_BUS_CLOCK=54000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x04000000
CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_IRAM_START=0x00700000
CONFIG_IRAM_SIZE=0x00010000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PREEMPT=y
-# CONFIG_SMP is not set
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-# CONFIG_BINFMT_FLAT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_ECN=m
-# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
CONFIG_PARPORT=m
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_ISAPNP=y
-# CONFIG_PNPACPI is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_ISA=y
-# CONFIG_E2100 is not set
-# CONFIG_EWRK3 is not set
-# CONFIG_EEXPRESS is not set
-# CONFIG_EEXPRESS_PRO is not set
-# CONFIG_HPLAN_PLUS is not set
-# CONFIG_HPLAN is not set
-# CONFIG_LP486E is not set
-# CONFIG_ETH16I is not set
CONFIG_NE2000=m
-# CONFIG_SEEQ8005 is not set
-CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_PNP=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_M32R_SIO=y
-# CONFIG_SERIAL_M32R_SIO_CONSOLE is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_ELEKTOR=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
-# CONFIG_SENSORS_ADM9240 is not set
-CONFIG_SENSORS_ASB100=m
-# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
-# CONFIG_SENSORS_F71805F is not set
-CONFIG_SENSORS_FSCHER=m
-# CONFIG_SENSORS_FSCPOS is not set
CONFIG_SENSORS_GL518SM=m
-# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
-# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
-# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=m
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_W83781D=m
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_PMS is not set
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-# CONFIG_VIDEO_W9966 is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_TUNER_TEA5761 is not set
-# CONFIG_VIDEO_M32R_AR is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:35 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-# CONFIG_PLAT_MAPPI is not set
-# CONFIG_PLAT_USRV is not set
CONFIG_PLAT_M32700UT=y
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
-# CONFIG_PLAT_MAPPI2 is not set
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-CONFIG_CHIP_M32700=y
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
-# CONFIG_CHIP_OPSP is not set
-CONFIG_MMU=y
-CONFIG_TLB_ENTRIES=32
-CONFIG_ISA_M32R2=y
-CONFIG_ISA_DSP_LEVEL2=y
-CONFIG_ISA_DUAL_ISSUE=y
-CONFIG_BUS_CLOCK=50000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00080000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PREEMPT=y
CONFIG_SMP=y
-# CONFIG_CHIP_M32700_TS1 is not set
-CONFIG_NR_CPUS=2
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_NE2000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
CONFIG_SERIAL_M32R_PLDSIO=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
CONFIG_DS1302=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_CPIA is not set
-CONFIG_VIDEO_M32R_AR=m
-CONFIG_VIDEO_M32R_AR_M64278=m
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_M32R_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:35 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-# CONFIG_PLAT_MAPPI is not set
-# CONFIG_PLAT_USRV is not set
CONFIG_PLAT_M32700UT=y
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
-# CONFIG_PLAT_MAPPI2 is not set
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-CONFIG_CHIP_M32700=y
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
-# CONFIG_CHIP_OPSP is not set
-CONFIG_MMU=y
-CONFIG_TLB_ENTRIES=32
-CONFIG_ISA_M32R2=y
-CONFIG_ISA_DSP_LEVEL2=y
-CONFIG_ISA_DUAL_ISSUE=y
-CONFIG_BUS_CLOCK=50000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00080000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PREEMPT=y
-# CONFIG_SMP is not set
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_NE2000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
CONFIG_SERIAL_M32R_PLDSIO=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
CONFIG_DS1302=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_CPIA is not set
-CONFIG_VIDEO_M32R_AR=m
-CONFIG_VIDEO_M32R_AR_M64278=m
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_M32R_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:36 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-CONFIG_PLAT_MAPPI=y
-# CONFIG_PLAT_USRV is not set
-# CONFIG_PLAT_M32700UT is not set
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
-# CONFIG_PLAT_MAPPI2 is not set
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-CONFIG_CHIP_M32700=y
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
-# CONFIG_CHIP_OPSP is not set
# CONFIG_MMU is not set
-CONFIG_TLB_ENTRIES=32
-CONFIG_ISA_M32R2=y
-CONFIG_ISA_DSP_LEVEL2=y
-CONFIG_ISA_DUAL_ISSUE=y
CONFIG_BUS_CLOCK=50000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x00000000
CONFIG_MEMORY_SIZE=0x00E00000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00080000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PREEMPT=y
-# CONFIG_SMP is not set
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_M32R_PCC=y
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Executable file formats
-#
CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:35 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-CONFIG_PLAT_MAPPI=y
-# CONFIG_PLAT_USRV is not set
-# CONFIG_PLAT_M32700UT is not set
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
-# CONFIG_PLAT_MAPPI2 is not set
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-CONFIG_CHIP_M32700=y
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
-# CONFIG_CHIP_OPSP is not set
-CONFIG_MMU=y
-CONFIG_TLB_ENTRIES=32
-CONFIG_ISA_M32R2=y
-CONFIG_ISA_DSP_LEVEL2=y
-CONFIG_ISA_DUAL_ISSUE=y
CONFIG_BUS_CLOCK=10000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00080000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PREEMPT=y
CONFIG_SMP=y
CONFIG_CHIP_M32700_TS1=y
-CONFIG_NR_CPUS=2
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_M32R_PCC=y
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=m
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:35 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-CONFIG_PLAT_MAPPI=y
-# CONFIG_PLAT_USRV is not set
-# CONFIG_PLAT_M32700UT is not set
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
-# CONFIG_PLAT_MAPPI2 is not set
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-CONFIG_CHIP_M32700=y
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
-# CONFIG_CHIP_OPSP is not set
-CONFIG_MMU=y
-CONFIG_TLB_ENTRIES=32
-CONFIG_ISA_M32R2=y
-CONFIG_ISA_DSP_LEVEL2=y
-CONFIG_ISA_DUAL_ISSUE=y
CONFIG_BUS_CLOCK=10000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00080000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PREEMPT=y
-# CONFIG_SMP is not set
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_M32R_PCC=y
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=m
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:36 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-# CONFIG_PLAT_MAPPI is not set
-# CONFIG_PLAT_USRV is not set
-# CONFIG_PLAT_M32700UT is not set
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
CONFIG_PLAT_MAPPI2=y
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-# CONFIG_CHIP_M32700 is not set
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
CONFIG_CHIP_OPSP=y
-CONFIG_MMU=y
CONFIG_TLB_ENTRIES=16
-CONFIG_ISA_M32R2=y
-CONFIG_ISA_DSP_LEVEL2=y
-CONFIG_ISA_DUAL_ISSUE=y
CONFIG_BUS_CLOCK=50000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00008000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PREEMPT=y
-# CONFIG_SMP is not set
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_M32R_CFC is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_NE2000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_M32R_AR is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:36 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-# CONFIG_PLAT_MAPPI is not set
-# CONFIG_PLAT_USRV is not set
-# CONFIG_PLAT_M32700UT is not set
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
CONFIG_PLAT_MAPPI2=y
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-# CONFIG_CHIP_M32700 is not set
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
CONFIG_CHIP_VDEC2=y
-# CONFIG_CHIP_OPSP is not set
-CONFIG_MMU=y
-CONFIG_TLB_ENTRIES=16
-CONFIG_ISA_M32R2=y
CONFIG_BUS_CLOCK=50000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00008000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PREEMPT=y
-# CONFIG_SMP is not set
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_M32R_CFC is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_NE2000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_M32R_AR is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:36 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-# CONFIG_PLAT_MAPPI is not set
-# CONFIG_PLAT_USRV is not set
-# CONFIG_PLAT_M32700UT is not set
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
-# CONFIG_PLAT_MAPPI2 is not set
CONFIG_PLAT_MAPPI3=y
-# CONFIG_PLAT_M32104UT is not set
-CONFIG_CHIP_M32700=y
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
-# CONFIG_CHIP_OPSP is not set
-CONFIG_MMU=y
-CONFIG_TLB_ENTRIES=32
-CONFIG_ISA_M32R2=y
-CONFIG_ISA_DSP_LEVEL2=y
-CONFIG_ISA_DUAL_ISSUE=y
CONFIG_BUS_CLOCK=10000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00080000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PREEMPT=y
CONFIG_SMP=y
-# CONFIG_CHIP_M32700_TS1 is not set
-CONFIG_NR_CPUS=2
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_M32R_PCC is not set
-# CONFIG_M32R_CFC is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_NE2000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:36 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-# CONFIG_PLAT_MAPPI is not set
-# CONFIG_PLAT_USRV is not set
-# CONFIG_PLAT_M32700UT is not set
-# CONFIG_PLAT_OPSPUT is not set
CONFIG_PLAT_OAKS32R=y
-# CONFIG_PLAT_MAPPI2 is not set
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-# CONFIG_CHIP_M32700 is not set
CONFIG_CHIP_M32102=y
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
-# CONFIG_CHIP_OPSP is not set
-CONFIG_ISA_M32R=y
-CONFIG_BUS_CLOCK=33333333
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x01000000
CONFIG_MEMORY_SIZE=0x00800000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00010000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PREEMPT=y
-# CONFIG_SMP is not set
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:37 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-# CONFIG_PLAT_MAPPI is not set
-# CONFIG_PLAT_USRV is not set
-# CONFIG_PLAT_M32700UT is not set
CONFIG_PLAT_OPSPUT=y
-# CONFIG_PLAT_OAKS32R is not set
-# CONFIG_PLAT_MAPPI2 is not set
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-# CONFIG_CHIP_M32700 is not set
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
CONFIG_CHIP_OPSP=y
-CONFIG_MMU=y
-CONFIG_TLB_ENTRIES=32
-CONFIG_ISA_M32R2=y
-CONFIG_ISA_DSP_LEVEL2=y
-CONFIG_ISA_DUAL_ISSUE=y
-CONFIG_BUS_CLOCK=50000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00010000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_PREEMPT is not set
-# CONFIG_SMP is not set
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_M32R_CFC=y
-CONFIG_M32R_CFC_NUM=1
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_NE2000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
CONFIG_SERIAL_M32R_PLDSIO=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
CONFIG_DS1302=y
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_FRAME_POINTER is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:37 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# Processor type and features
-#
-# CONFIG_PLAT_MAPPI is not set
CONFIG_PLAT_USRV=y
-# CONFIG_PLAT_M32700UT is not set
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
-# CONFIG_PLAT_MAPPI2 is not set
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-CONFIG_CHIP_M32700=y
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
-# CONFIG_CHIP_OPSP is not set
-CONFIG_MMU=y
-CONFIG_TLB_ENTRIES=32
-CONFIG_ISA_M32R2=y
-CONFIG_ISA_DSP_LEVEL2=y
-CONFIG_ISA_DUAL_ISSUE=y
CONFIG_BUS_CLOCK=50000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_NOHIGHMEM=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_PREEMPT is not set
CONFIG_SMP=y
-# CONFIG_CHIP_M32700_TS1 is not set
-CONFIG_NR_CPUS=2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_M32R_PCC is not set
CONFIG_M32R_CFC=y
CONFIG_M32R_CFC_NUM=2
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=y
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
-# CONFIG_IEEE80211_SOFTMAC is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_M32R_SIO is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0x1fffffff)
-
#endif /* _ASM_M32R_SCATTERLIST_H */
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
/*
* sys_execve() executes a new program.
*/
-asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv,
- char __user * __user *uenvp,
+asmlinkage int sys_execve(const char __user *ufilename,
+ const char __user *const __user *uargv,
+ const char __user *const __user *uenvp,
unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, struct pt_regs regs)
{
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
register long __scno __asm__ ("r7") = __NR_execve;
register long __arg3 __asm__ ("r2") = (long)(envp);
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:47:52 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_DMA is not set
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-amiga"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
CONFIG_AMIGA=y
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
CONFIG_M68020=y
CONFIG_M68030=y
CONFIG_M68040=y
CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=3
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_ZORRO=y
CONFIG_AMIGA_PCMCIA=y
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
CONFIG_PARPORT_AMIGA=m
CONFIG_PARPORT_MFC3=m
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
CONFIG_AMIGA_FLOPPY=y
CONFIG_AMIGA_Z2RAM=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
CONFIG_BLK_DEV_BUDDHA=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_53C700_BE_BUS=y
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_A3000_SCSI=y
CONFIG_A2091_SCSI=y
CONFIG_GVP11_SCSI=y
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_ARIADNE=y
CONFIG_A2065=y
CONFIG_HYDRA=y
CONFIG_ZORRO8390=y
CONFIG_APNE=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_ETHOC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_AMIGA=y
-CONFIG_INPUT_MOUSE=y
+# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_AMIGA=m
-# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_DB9 is not set
-# CONFIG_JOYSTICK_GAMECON is not set
-# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_AMIGA=m
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_M68K_BEEP=m
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=y
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_CIRRUS=y
CONFIG_FB_AMIGA=y
CONFIG_FB_AMIGA_OCS=y
CONFIG_FB_AMIGA_ECS=y
CONFIG_FB_AMIGA_AGA=y
CONFIG_FB_FM2=y
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_PEARL_8x8=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
CONFIG_DMASOUND_PAULA=m
-CONFIG_DMASOUND=m
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_MULTIFACE_III_TTY=m
CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:47:54 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_DMA is not set
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-apollo"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
CONFIG_APOLLO=y
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
CONFIG_M68020=y
CONFIG_M68030=y
CONFIG_M68040=y
CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=3
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
CONFIG_SERIO=m
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-# CONFIG_FB_CFB_COPYAREA is not set
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_APOLLO=y
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
CONFIG_DN_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:47:56 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_DMA is not set
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-atari"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_AMIGA is not set
CONFIG_ATARI=y
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
CONFIG_M68020=y
CONFIG_M68030=y
CONFIG_M68040=y
CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=3
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_STRAM_PROC=y
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_ATARI=m
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_BLK_DEV=y
CONFIG_ATARI_FLOPPY=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_FALCON_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_ATARI_SCSI=y
-# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
-# CONFIG_ATARI_SCSI_RESET_BOOT is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_ATARILANCE=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_ATARI_KBD_CORE=y
CONFIG_KEYBOARD_ATARI=y
-CONFIG_INPUT_MOUSE=y
+# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_ATARI=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_M68K_BEEP=m
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_ATARI=y
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
CONFIG_DMASOUND_ATARI=m
-CONFIG_DMASOUND=m
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
CONFIG_ATARI_MFPSER=y
CONFIG_ATARI_MIDI=y
CONFIG_ATARI_DSP56K=m
CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_ATARI_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:47:59 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_DMA is not set
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-bvme6000"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
CONFIG_VME=y
-# CONFIG_MVME147 is not set
-# CONFIG_MVME16x is not set
CONFIG_BVME6000=y
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-# CONFIG_M68020 is not set
-# CONFIG_M68030 is not set
CONFIG_M68040=y
CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=3
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-CONFIG_53C700_BE_BUS=y
-# CONFIG_SCSI_DEBUG is not set
CONFIG_BVME6000_SCSI=y
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_BVME6000_NET=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
CONFIG_SERIO=m
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
-CONFIG_BVME6000_SCC=y
-CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:48:01 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_DMA is not set
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-hp300"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
CONFIG_HP300=y
-CONFIG_DIO=y
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
CONFIG_M68020=y
CONFIG_M68030=y
CONFIG_M68040=y
CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=3
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_HPLANCE=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HIL_OLD=y
-CONFIG_KEYBOARD_HIL=y
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_HIL=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_M68K_BEEP is not set
-# CONFIG_INPUT_UINPUT is not set
CONFIG_HP_SDC_RTC=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_HP300=y
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:48:03 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_DMA is not set
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-mac"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
CONFIG_MAC=y
-CONFIG_NUBUS=y
-CONFIG_M68K_L2_CACHE=y
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
CONFIG_M68020=y
CONFIG_M68030=y
CONFIG_M68040=y
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=3
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-# CONFIG_HEARTBEAT is not set
CONFIG_PROC_HARDWARE=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_SWIM=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_MAC_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
-CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
CONFIG_ADB_MACII=y
CONFIG_ADB_MACIISI=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MAC8390=y
CONFIG_MAC89x0=m
CONFIG_MACSONIC=m
CONFIG_MACMACE=y
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_M68K_BEEP=m
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
CONFIG_SERIO=m
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_VALKYRIE=y
CONFIG_FB_MAC=y
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_6x11=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_MAC_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
-CONFIG_MAC_HID=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:48:06 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_DMA is not set
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-multi"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
CONFIG_AMIGA=y
CONFIG_ATARI=y
CONFIG_MAC=y
-CONFIG_NUBUS=y
-CONFIG_M68K_L2_CACHE=y
CONFIG_APOLLO=y
CONFIG_VME=y
CONFIG_MVME147=y
CONFIG_MVME16x=y
CONFIG_BVME6000=y
CONFIG_HP300=y
-CONFIG_DIO=y
CONFIG_SUN3X=y
CONFIG_Q40=y
-
-#
-# Processor type
-#
CONFIG_M68020=y
-CONFIG_M68030=y
CONFIG_M68040=y
CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=3
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_ZORRO=y
CONFIG_STRAM_PROC=y
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
-# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
CONFIG_PARPORT_AMIGA=m
CONFIG_PARPORT_MFC3=m
CONFIG_PARPORT_ATARI=m
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
CONFIG_AMIGA_FLOPPY=y
CONFIG_ATARI_FLOPPY=y
CONFIG_BLK_DEV_SWIM=y
CONFIG_AMIGA_Z2RAM=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
CONFIG_BLK_DEV_BUDDHA=y
CONFIG_BLK_DEV_FALCON_IDE=y
CONFIG_BLK_DEV_MAC_IDE=y
CONFIG_BLK_DEV_Q40IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_53C700_BE_BUS=y
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_A3000_SCSI=y
CONFIG_A2091_SCSI=y
CONFIG_GVP11_SCSI=y
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
CONFIG_ATARI_SCSI=y
-# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
-# CONFIG_ATARI_SCSI_RESET_BOOT is not set
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
CONFIG_MVME147_SCSI=y
CONFIG_MVME16x_SCSI=y
CONFIG_BVME6000_SCSI=y
CONFIG_SUN3X_ESP=y
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
-CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
CONFIG_ADB_MACII=y
CONFIG_ADB_MACIISI=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_ARIADNE=y
CONFIG_ATARILANCE=y
CONFIG_SUN3LANCE=y
CONFIG_HPLANCE=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_ETHOC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
CONFIG_NE2000=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SUNKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_AMIGA=y
-CONFIG_ATARI_KBD_CORE=y
CONFIG_KEYBOARD_ATARI=y
-CONFIG_KEYBOARD_HIL_OLD=y
-CONFIG_KEYBOARD_HIL=y
-CONFIG_INPUT_MOUSE=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SUNKBD=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_AMIGA=m
CONFIG_MOUSE_ATARI=m
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_HIL=y
CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_DB9 is not set
-# CONFIG_JOYSTICK_GAMECON is not set
-# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_AMIGA=m
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_M68K_BEEP=m
-# CONFIG_INPUT_UINPUT is not set
CONFIG_HP_SDC_RTC=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_Q40KBD=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=y
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_CIRRUS=y
-CONFIG_FB_APOLLO=y
-CONFIG_FB_Q40=y
CONFIG_FB_AMIGA=y
CONFIG_FB_AMIGA_OCS=y
CONFIG_FB_AMIGA_ECS=y
CONFIG_FB_ATARI=y
CONFIG_FB_VALKYRIE=y
CONFIG_FB_MAC=y
-CONFIG_FB_HP300=y
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_6x11=y
-CONFIG_FONT_PEARL_8x8=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_MAC_CLUT224=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND_PAULA=m
CONFIG_DMASOUND_Q40=m
-CONFIG_DMASOUND=m
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
CONFIG_ATARI_MFPSER=y
CONFIG_ATARI_MIDI=y
CONFIG_ATARI_DSP56K=m
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_MULTIFACE_III_TTY=m
-CONFIG_MAC_HID=y
-CONFIG_MVME147_SCC=y
CONFIG_SERIAL167=y
-CONFIG_MVME162_SCC=y
-CONFIG_BVME6000_SCC=y
CONFIG_DN_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:48:08 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_DMA is not set
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-mvme147"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
CONFIG_VME=y
CONFIG_MVME147=y
-# CONFIG_MVME16x is not set
-# CONFIG_BVME6000 is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-# CONFIG_M68020 is not set
CONFIG_M68030=y
-# CONFIG_M68040 is not set
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=3
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME147_SCSI=y
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MVME147_NET=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
CONFIG_SERIO=m
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
-CONFIG_MVME147_SCC=y
-CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:48:10 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_DMA is not set
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-mvme16x"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
CONFIG_VME=y
-# CONFIG_MVME147 is not set
CONFIG_MVME16x=y
-# CONFIG_BVME6000 is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-# CONFIG_M68020 is not set
-# CONFIG_M68030 is not set
CONFIG_M68040=y
CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=3
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-CONFIG_53C700_BE_BUS=y
-# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME16x_SCSI=y
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MVME16x_NET=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
CONFIG_SERIO=m
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
CONFIG_SERIAL167=y
-CONFIG_MVME162_SCC=y
CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:48:13 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_DMA is not set
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-q40"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
CONFIG_Q40=y
-
-#
-# Processor type
-#
-# CONFIG_M68020 is not set
-# CONFIG_M68030 is not set
CONFIG_M68040=y
CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=3
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_Q40IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_ETHOC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
CONFIG_NE2000=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_M68K_BEEP=m
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
CONFIG_SERIO=m
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_Q40KBD=m
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_Q40=y
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
CONFIG_DMASOUND_Q40=m
-CONFIG_DMASOUND=m
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:48:16 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-sun3"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
CONFIG_SUN3=y
-
-#
-# Processor type
-#
-CONFIG_M68020=y
-CONFIG_MMU_SUN3=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_SINGLE_MEMORY_CHUNK=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-# CONFIG_SCSI_DMA is not set
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3_SCSI=y
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_SUN3LANCE=y
CONFIG_SUN3_82586=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_SUNKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed Apr 22 20:48:20 2009
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_IOPORT=y
-# CONFIG_NO_DMA is not set
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-sun3x"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
CONFIG_SUN3X=y
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-# CONFIG_M68020 is not set
-CONFIG_M68030=y
-# CONFIG_M68040 is not set
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=3
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
-CONFIG_ZONE_DMA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3X_ESP=y
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_SUN3LANCE=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_SUNKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Character devices
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
#define L1_CACHE_SHIFT 4
#define L1_CACHE_BYTES (1<< L1_CACHE_SHIFT)
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#endif
return 0;
}
-static inline int dma_get_cache_alignment(void)
-{
- return 1 << L1_CACHE_SHIFT;
-}
-
-static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
-{
- return 0;
-}
-
extern void *dma_alloc_coherent(struct device *, size_t,
dma_addr_t *, gfp_t);
extern void dma_free_coherent(struct device *, size_t,
/*
- * linux/include/asm-m68k/ide.h
- *
* Copyright (C) 1994-1996 Linus Torvalds & authors
*/
#include <asm/io.h>
#include <asm/irq.h>
+#ifdef CONFIG_MMU
+
/*
* Get rid of defs from io.h - ide has its private and conflicting versions
* Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
#define __ide_mm_outsw(port, addr, n) raw_outsw((u16 *)port, addr, n)
#define __ide_mm_outsl(port, addr, n) raw_outsl((u32 *)port, addr, n)
+#else
+
+#define __ide_mm_insw(port, addr, n) io_insw((unsigned int)port, addr, n)
+#define __ide_mm_insl(port, addr, n) io_insl((unsigned int)port, addr, n)
+#define __ide_mm_outsw(port, addr, n) io_outsw((unsigned int)port, addr, n)
+#define __ide_mm_outsl(port, addr, n) io_outsl((unsigned int)port, addr, n)
+
+#endif /* CONFIG_MMU */
+
#endif /* __KERNEL__ */
#endif /* _M68K_IDE_H */
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/scatterlist.h>
-/* This is bogus and should go away. */
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
#endif /* !(_M68K_SCATTERLIST_H) */
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
/*
* sys_execve() executes a new program.
*/
-asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp)
+asmlinkage int sys_execve(const char __user *name,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp)
{
int error;
char * filename;
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
register long __res asm ("%d0") = __NR_execve;
register long __a asm ("%d1") = (long)(filename);
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
+ }, {
+ .ident = MAC_MODEL_CCLII,
+ .name = "Color Classic II",
+ .adb_type = MAC_ADB_CUDA,
+ .via_type = MAC_VIA_IIci,
+ .scsi_type = MAC_SCSI_OLD,
+ .scc_type = MAC_SCC_II,
+ .nubus_type = MAC_NUBUS,
+ .floppy_type = MAC_FLOPPY_SWIM_ADDR2,
},
/*
#define cuda_write_pram NULL
#endif
-#if 0 /* def CONFIG_ADB_PMU68K */
+#ifdef CONFIG_ADB_PMU68K
static long pmu_read_time(void)
{
struct adb_request req;
while (!req.complete)
pmu_poll();
- time = (req.reply[0] << 24) | (req.reply[1] << 16)
- | (req.reply[2] << 8) | req.reply[3];
+ time = (req.reply[1] << 24) | (req.reply[2] << 16)
+ | (req.reply[3] << 8) | req.reply[4];
return time - RTC_OFFSET;
}
unsigned char dfc;
GET_DFC(dfc);
- SET_DFC(FC_CONTROL);
- SET_CONTROL_BYTE(AC_LEDS,byte);
+ SET_DFC(FC_CONTROL);
+ SET_CONTROL_BYTE(AC_LEDS, byte);
SET_DFC(dfc);
}
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-#
-CONFIG_M68K=y
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_NO_IOPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_M68328 is not set
-# CONFIG_M68EZ328 is not set
-# CONFIG_M68VZ328 is not set
-# CONFIG_M68360 is not set
-# CONFIG_M5206 is not set
-# CONFIG_M5206e is not set
CONFIG_M520x=y
-# CONFIG_M523x is not set
-# CONFIG_M5249 is not set
-# CONFIG_M5271 is not set
-# CONFIG_M5272 is not set
-# CONFIG_M5275 is not set
-# CONFIG_M528x is not set
-# CONFIG_M5307 is not set
-# CONFIG_M532x is not set
-# CONFIG_M5407 is not set
-CONFIG_COLDFIRE=y
CONFIG_CLOCK_SET=y
CONFIG_CLOCK_FREQ=166666666
CONFIG_CLOCK_DIV=2
-
-#
-# Platform
-#
CONFIG_M5208EVB=y
-CONFIG_FREESCALE=y
# CONFIG_4KSTACKS is not set
-CONFIG_HZ=100
-
-#
-# RAM configuration
-#
CONFIG_RAMBASE=0x40000000
CONFIG_RAMSIZE=0x2000000
CONFIG_VECTORBASE=0x40000000
CONFIG_KERNELBASE=0x40020000
-# CONFIG_RAMAUTOBIT is not set
-# CONFIG_RAM8BIT is not set
CONFIG_RAM16BIT=y
-# CONFIG_RAM32BIT is not set
-
-#
-# ROM configuration
-#
-# CONFIG_ROM is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Executable file formats
-#
CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
CONFIG_FEC=y
-# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=115200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
# CONFIG_FILE_LOCKING is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_MTD=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
CONFIG_FULLDEBUG=y
-# CONFIG_HIGHPROFILE is not set
CONFIG_BOOTPARAM=y
CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_NO_KERNEL_MSG is not set
-# CONFIG_BDM_DISABLE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 22 17:32:41 2009
-#
-CONFIG_M68K=y
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_TIME_LOW_RES=y
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_NO_IOPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_M68328 is not set
-# CONFIG_M68EZ328 is not set
-# CONFIG_M68VZ328 is not set
-# CONFIG_M68360 is not set
-# CONFIG_M5206 is not set
-# CONFIG_M5206e is not set
-# CONFIG_M520x is not set
-# CONFIG_M523x is not set
CONFIG_M5249=y
-# CONFIG_M5271 is not set
-# CONFIG_M5272 is not set
-# CONFIG_M5275 is not set
-# CONFIG_M528x is not set
-# CONFIG_M5307 is not set
-# CONFIG_M532x is not set
-# CONFIG_M5407 is not set
-CONFIG_COLDFIRE=y
CONFIG_CLOCK_SET=y
CONFIG_CLOCK_FREQ=140000000
CONFIG_CLOCK_DIV=2
-
-#
-# Platform
-#
CONFIG_M5249C3=y
-CONFIG_FREESCALE=y
-CONFIG_4KSTACKS=y
-CONFIG_HZ=100
-
-#
-# RAM configuration
-#
CONFIG_RAMBASE=0x00000000
CONFIG_RAMSIZE=0x00800000
CONFIG_VECTORBASE=0x00000000
CONFIG_KERNELBASE=0x00020000
-CONFIG_RAMAUTOBIT=y
-# CONFIG_RAM8BIT is not set
-# CONFIG_RAM16BIT is not set
-# CONFIG_RAM32BIT is not set
-
-#
-# ROM configuration
-#
-# CONFIG_ROM is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Executable file formats
-#
CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
# CONFIG_FILE_LOCKING is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_MTD=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_FULLDEBUG is not set
-# CONFIG_HIGHPROFILE is not set
CONFIG_BOOTPARAM=y
CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_NO_KERNEL_MSG is not set
-# CONFIG_BDM_DISABLE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 22 17:17:30 2009
-#
-CONFIG_M68K=y
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_TIME_LOW_RES=y
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_NO_IOPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_M68328 is not set
-# CONFIG_M68EZ328 is not set
-# CONFIG_M68VZ328 is not set
-# CONFIG_M68360 is not set
-# CONFIG_M5206 is not set
-# CONFIG_M5206e is not set
-# CONFIG_M520x is not set
-# CONFIG_M523x is not set
-# CONFIG_M5249 is not set
-# CONFIG_M5271 is not set
CONFIG_M5272=y
-# CONFIG_M5275 is not set
-# CONFIG_M528x is not set
-# CONFIG_M5307 is not set
-# CONFIG_M532x is not set
-# CONFIG_M5407 is not set
-CONFIG_COLDFIRE=y
CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=66666666
-CONFIG_CLOCK_DIV=1
-
-#
-# Platform
-#
-# CONFIG_UC5272 is not set
CONFIG_M5272C3=y
-# CONFIG_COBRA5272 is not set
-# CONFIG_CANCam is not set
-# CONFIG_SCALES is not set
-# CONFIG_NETtel is not set
-# CONFIG_CPU16B is not set
-# CONFIG_MOD5272 is not set
-CONFIG_FREESCALE=y
-CONFIG_4KSTACKS=y
-CONFIG_HZ=100
-
-#
-# RAM configuration
-#
CONFIG_RAMBASE=0x00000000
CONFIG_RAMSIZE=0x00800000
CONFIG_VECTORBASE=0x00000000
CONFIG_KERNELBASE=0x00020000
-CONFIG_RAMAUTOBIT=y
-# CONFIG_RAM8BIT is not set
-# CONFIG_RAM16BIT is not set
-# CONFIG_RAM32BIT is not set
-
-#
-# ROM configuration
-#
-# CONFIG_ROM is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
-
-#
-# Executable file formats
-#
CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
CONFIG_FEC=y
-# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
# CONFIG_FILE_LOCKING is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_MTD=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_FULLDEBUG is not set
-# CONFIG_HIGHPROFILE is not set
CONFIG_BOOTPARAM=y
CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_NO_KERNEL_MSG is not set
-# CONFIG_BDM_DISABLE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 22 23:29:01 2009
-#
-CONFIG_M68K=y
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_NO_IOPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_M68328 is not set
-# CONFIG_M68EZ328 is not set
-# CONFIG_M68VZ328 is not set
-# CONFIG_M68360 is not set
-# CONFIG_M5206 is not set
-# CONFIG_M5206e is not set
-# CONFIG_M520x is not set
-# CONFIG_M523x is not set
-# CONFIG_M5249 is not set
-# CONFIG_M5271 is not set
-# CONFIG_M5272 is not set
CONFIG_M5275=y
-# CONFIG_M528x is not set
-# CONFIG_M5307 is not set
-# CONFIG_M532x is not set
-# CONFIG_M5407 is not set
-CONFIG_M527x=y
-CONFIG_COLDFIRE=y
CONFIG_CLOCK_SET=y
CONFIG_CLOCK_FREQ=150000000
CONFIG_CLOCK_DIV=2
-
-#
-# Platform
-#
CONFIG_M5275EVB=y
-CONFIG_FREESCALE=y
# CONFIG_4KSTACKS is not set
-CONFIG_HZ=100
-
-#
-# RAM configuration
-#
CONFIG_RAMBASE=0x00000000
CONFIG_RAMSIZE=0x00000000
CONFIG_VECTORBASE=0x00000000
CONFIG_KERNELBASE=0x00020000
-CONFIG_RAMAUTOBIT=y
-# CONFIG_RAM8BIT is not set
-# CONFIG_RAM16BIT is not set
-# CONFIG_RAM32BIT is not set
-
-#
-# ROM configuration
-#
-# CONFIG_ROM is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Executable file formats
-#
CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
CONFIG_FEC=y
CONFIG_FEC2=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
# CONFIG_FILE_LOCKING is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_MTD=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-# CONFIG_FULLDEBUG is not set
-# CONFIG_HIGHPROFILE is not set
CONFIG_BOOTPARAM=y
CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_NO_KERNEL_MSG is not set
-# CONFIG_BDM_DISABLE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-#
-CONFIG_M68K=y
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_TIME_LOW_RES=y
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_NO_IOPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_M68328 is not set
-# CONFIG_M68EZ328 is not set
-# CONFIG_M68VZ328 is not set
-# CONFIG_M68360 is not set
-# CONFIG_M5206 is not set
-# CONFIG_M5206e is not set
-# CONFIG_M520x is not set
-# CONFIG_M523x is not set
-# CONFIG_M5249 is not set
-# CONFIG_M5271 is not set
-# CONFIG_M5272 is not set
-# CONFIG_M5275 is not set
-# CONFIG_M528x is not set
CONFIG_M5307=y
-# CONFIG_M532x is not set
-# CONFIG_M5407 is not set
-CONFIG_COLDFIRE=y
CONFIG_CLOCK_SET=y
CONFIG_CLOCK_FREQ=90000000
CONFIG_CLOCK_DIV=2
-# CONFIG_OLDMASK is not set
-
-#
-# Platform
-#
-# CONFIG_ARN5307 is not set
CONFIG_M5307C3=y
-# CONFIG_SECUREEDGEMP3 is not set
-# CONFIG_CLEOPATRA is not set
-# CONFIG_NETtel is not set
-CONFIG_FREESCALE=y
-CONFIG_4KSTACKS=y
-CONFIG_HZ=100
-
-#
-# RAM configuration
-#
CONFIG_RAMBASE=0x00000000
CONFIG_RAMSIZE=0x00800000
CONFIG_VECTORBASE=0x00000000
CONFIG_KERNELBASE=0x00020000
-CONFIG_RAMAUTOBIT=y
-# CONFIG_RAM8BIT is not set
-# CONFIG_RAM16BIT is not set
-# CONFIG_RAM32BIT is not set
-
-#
-# ROM configuration
-#
-# CONFIG_ROM is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Executable file formats
-#
CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=y
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_MTD=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
CONFIG_FULLDEBUG=y
-# CONFIG_HIGHPROFILE is not set
CONFIG_BOOTPARAM=y
CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_NO_KERNEL_MSG is not set
-# CONFIG_BDM_DISABLE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Thu Apr 23 09:21:40 2009
-#
-CONFIG_M68K=y
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_TIME_LOW_RES=y
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_NO_IOPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_M68328 is not set
-# CONFIG_M68EZ328 is not set
-# CONFIG_M68VZ328 is not set
-# CONFIG_M68360 is not set
-# CONFIG_M5206 is not set
-# CONFIG_M5206e is not set
-# CONFIG_M520x is not set
-# CONFIG_M523x is not set
-# CONFIG_M5249 is not set
-# CONFIG_M5271 is not set
-# CONFIG_M5272 is not set
-# CONFIG_M5275 is not set
-# CONFIG_M528x is not set
-# CONFIG_M5307 is not set
-# CONFIG_M532x is not set
CONFIG_M5407=y
-CONFIG_COLDFIRE=y
CONFIG_CLOCK_SET=y
CONFIG_CLOCK_FREQ=50000000
-CONFIG_CLOCK_DIV=1
-
-#
-# Platform
-#
CONFIG_M5407C3=y
-# CONFIG_CLEOPATRA is not set
-CONFIG_FREESCALE=y
-CONFIG_4KSTACKS=y
-CONFIG_HZ=100
-
-#
-# RAM configuration
-#
CONFIG_RAMBASE=0x00000000
CONFIG_RAMSIZE=0x00000000
CONFIG_VECTORBASE=0x00000000
CONFIG_KERNELBASE=0x00020000
-CONFIG_RAMAUTOBIT=y
-# CONFIG_RAM8BIT is not set
-# CONFIG_RAM16BIT is not set
-# CONFIG_RAM32BIT is not set
-
-#
-# ROM configuration
-#
-# CONFIG_ROM is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Executable file formats
-#
CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
# CONFIG_FILE_LOCKING is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_MTD=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_SAMPLES is not set
-# CONFIG_FULLDEBUG is not set
-# CONFIG_HIGHPROFILE is not set
CONFIG_BOOTPARAM=y
CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_NO_KERNEL_MSG is not set
-# CONFIG_BDM_DISABLE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Mon Feb 25 15:03:00 2008
-#
-CONFIG_M68K=y
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-
-#
-# Processor type and features
-#
-# CONFIG_M68328 is not set
-# CONFIG_M68EZ328 is not set
-# CONFIG_M68VZ328 is not set
-# CONFIG_M68360 is not set
-# CONFIG_M5206 is not set
-# CONFIG_M5206e is not set
-# CONFIG_M520x is not set
-# CONFIG_M523x is not set
-# CONFIG_M5249 is not set
-# CONFIG_M5271 is not set
-CONFIG_M5272=y
-# CONFIG_M5275 is not set
-# CONFIG_M528x is not set
-# CONFIG_M5307 is not set
-# CONFIG_M532x is not set
-# CONFIG_M5407 is not set
-CONFIG_COLDFIRE=y
+CONFIG_M520x=y
CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=66666666
-CONFIG_CLOCK_DIV=1
-
-#
-# Platform
-#
-# CONFIG_UC5272 is not set
-CONFIG_M5272C3=y
-# CONFIG_COBRA5272 is not set
-# CONFIG_CANCam is not set
-# CONFIG_SCALES is not set
-# CONFIG_NETtel is not set
-# CONFIG_CPU16B is not set
-# CONFIG_MOD5272 is not set
-CONFIG_FREESCALE=y
-CONFIG_4KSTACKS=y
-CONFIG_HZ=100
-
-#
-# RAM configuration
-#
-CONFIG_RAMBASE=0x0
-CONFIG_RAMSIZE=0x800000
-CONFIG_VECTORBASE=0x0
-CONFIG_KERNELBASE=0x20000
-CONFIG_RAMAUTOBIT=y
-# CONFIG_RAM8BIT is not set
-# CONFIG_RAM16BIT is not set
-# CONFIG_RAM32BIT is not set
-
-#
-# ROM configuration
-#
-# CONFIG_ROM is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Executable file formats
-#
+CONFIG_CLOCK_FREQ=166666666
+CONFIG_CLOCK_DIV=2
+CONFIG_M5208EVB=y
+# CONFIG_4KSTACKS is not set
+CONFIG_RAMBASE=0x40000000
+CONFIG_RAMSIZE=0x2000000
+CONFIG_VECTORBASE=0x40000000
+CONFIG_KERNELBASE=0x40020000
+CONFIG_RAM16BIT=y
CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
CONFIG_FEC=y
-# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_BAUDRATE=115200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSFS is not set
CONFIG_ROMFS_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_FULLDEBUG is not set
-# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
-# CONFIG_NO_KERNEL_MSG is not set
-# CONFIG_BDM_DISABLE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_FULLDEBUG=y
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
fp->d0, fp->d1, fp->d2, fp->d3);
printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
fp->d4, fp->d5, fp->a0, fp->a1);
- printk(KERN_EMERG "\nUSP: %08x TRAPFRAME: %08x\n",
- (unsigned int) rdusp(), (unsigned int) fp);
+ printk(KERN_EMERG "\nUSP: %08x TRAPFRAME: %p\n",
+ (unsigned int) rdusp(), fp);
printk(KERN_EMERG "\nCODE:");
tp = ((unsigned char *) fp->pc) - 0x20;
for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
if ((i % 0x10) == 0)
- printk(KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%p: ", tp + i);
printk("%08x ", (int) *sp++);
}
printk(KERN_EMERG "\n");
tp = ((unsigned char *) fp) - 0x40;
for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
if ((i % 0x10) == 0)
- printk(KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%p: ", tp + i);
printk("%08x ", (int) *sp++);
}
printk(KERN_EMERG "\n");
tp = (unsigned char *) (rdusp() - 0x10);
for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
if ((i % 0x10) == 0)
- printk(KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%p: ", tp + i);
printk("%08x ", (int) *sp++);
}
printk(KERN_EMERG "\n");
/*
* sys_execve() executes a new program.
*/
-asmlinkage int sys_execve(char *name, char **argv, char **envp)
+asmlinkage int sys_execve(const char *name,
+ const char *const *argv,
+ const char *const *envp)
{
int error;
char * filename;
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
register long __res asm ("%d0") = __NR_execve;
register long __a asm ("%d1") = (long)(filename);
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc6
-# Thu May 6 11:22:14 2010
-#
-CONFIG_MICROBLAZE=y
-# CONFIG_SWAP is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-# CONFIG_GENERIC_TIME_VSYSCALL is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_DTC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform options
-#
-CONFIG_PLATFORM_GENERIC=y
-CONFIG_OPT_LIB_FUNCTION=y
CONFIG_OPT_LIB_ASM=y
-
-#
-# Definitions for MICROBLAZE0
-#
-CONFIG_KERNEL_BASE_ADDR=0x90000000
-CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
-CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d"
-
-#
-# Processor type and features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
CONFIG_MMU=y
-
-#
-# Boot options
-#
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyUL0,115200"
CONFIG_CMDLINE_FORCE=y
-CONFIG_OF=y
-CONFIG_PROC_DEVICETREE=y
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Exectuable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Bus Options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
CONFIG_XILINX_EMACLITE=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_XILINX_HWICAP is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SLAB_LEAK is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
-# CONFIG_HEART_BEAT is not set
CONFIG_DEBUG_BOOTMEM=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc6
-# Thu May 6 11:25:12 2010
-#
-CONFIG_MICROBLAZE=y
-# CONFIG_SWAP is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-# CONFIG_GENERIC_TIME_VSYSCALL is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_DTC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform options
-#
-CONFIG_PLATFORM_GENERIC=y
-# CONFIG_SELFMOD is not set
# CONFIG_OPT_LIB_FUNCTION is not set
-
-#
-# Definitions for MICROBLAZE0
-#
-CONFIG_KERNEL_BASE_ADDR=0x90000000
-CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
-CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d"
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-# CONFIG_MMU is not set
-CONFIG_NO_MMU=y
-
-#
-# Boot options
-#
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyUL0,115200"
-# CONFIG_CMDLINE_FORCE is not set
-CONFIG_OF=y
-CONFIG_PROC_DEVICETREE=y
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0x90000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
-
-#
-# Exectuable file formats
-#
CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Bus Options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
+CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_XILINX_HWICAP is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
-# CONFIG_DEBUG_OBJECTS_WORK is not set
-CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
-# CONFIG_HEART_BEAT is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h) (1)
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
ops->free_coherent(dev, size, cpu_addr, dma_handle);
}
-static inline int dma_get_cache_alignment(void)
-{
- return L1_CACHE_BYTES;
-}
-
static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
{
#ifndef __ASSEMBLY__
/* MS be sure that SLAB allocates aligned objects */
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES
#include <asm-generic/scatterlist.h>
-
-#define ISA_DMA_THRESHOLD (~0UL)
/* We can only get here if we hit a P2P bridge with no node,
* let's do standard swizzling and try again
*/
- lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
+ lspec = pci_swizzle_interrupt_pin(pdev, lspec);
pdev = ppdev;
}
return do_fork(flags, stack, regs, 0, NULL, NULL);
}
-asmlinkage long microblaze_execve(char __user *filenamei, char __user *__user *argv,
- char __user *__user *envp, struct pt_regs *regs)
+asmlinkage long microblaze_execve(const char __user *filenamei,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp,
+ struct pt_regs *regs)
{
int error;
char *filename;
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
register const char *__a __asm__("r5") = filename;
register const void *__b __asm__("r6") = argv;
#include <linux/irq.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
struct dev_archdata *sd = &dev->dev.archdata;
/* Setup OF node pointer in archdata */
- sd->of_node = pci_device_to_OF_node(dev);
+ dev->dev.of_node = pci_device_to_OF_node(dev);
/* Fixup NUMA node as it may not be setup yet by the generic
* code and is needed by the DMA init
#include <linux/ioport.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/pci.h>
#include <asm/io.h>
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc6
-# Sat May 1 11:35:01 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
CONFIG_AR7=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
CONFIG_KEXEC=y
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_DEFAULT_BIC is not set
-# CONFIG_DEFAULT_CUBIC is not set
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-CONFIG_DEFAULT_WESTWOOD=y
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="westwood"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
-# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
CONFIG_ATM=m
-# CONFIG_ATM_CLIP is not set
-# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
-CONFIG_STP=y
CONFIG_BRIDGE=y
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_ATM is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_INGRESS is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-# CONFIG_AX25 is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_IFB is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
CONFIG_CPMAC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_TCP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AR7_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-CONFIG_VLYNQ=y
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_LKDTM is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_SPINLOCK_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc6
-# Sat May 1 12:14:30 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_AR7 is not set
CONFIG_BCM47XX=y
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_CSRC_R4K=y
-CONFIG_CFE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
CONFIG_KEXEC=y
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CFQ_GROUP_IOSCHED is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_DEFAULT_BIC=y
-# CONFIG_DEFAULT_CUBIC is not set
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="bic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
-# CONFIG_IP_VS_PROTO_SCTP is not set
-
-#
-# IPVS scheduler
-#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
-# CONFIG_BRIDGE_EBT_IP6 is not set
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
-# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=y
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=y
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
-CONFIG_TIPC_ZONES=3
-CONFIG_TIPC_CLUSTERS=1
-CONFIG_TIPC_NODES=255
-CONFIG_TIPC_PORTS=8191
-CONFIG_TIPC_LOG=0
-# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
-# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
-# CONFIG_BT_L2CAP is not set
-# CONFIG_BT_SCO is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
-CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_IFB is not set
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
-# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MDIO_BITBANG=m
-# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
CONFIG_B44=y
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-# CONFIG_FORCEDETH is not set
-# CONFIG_TC35815 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
CONFIG_ATH_COMMON=m
-# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
-# CONFIG_ATH9K is not set
-# CONFIG_AR9170_USB is not set
CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PIO=y
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_LEDS=y
-# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
-CONFIG_B43LEGACY_DEBUG=y
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_IPHETH is not set
CONFIG_USB_SIERRA_NET=m
-# CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
-# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
-# CONFIG_SLIP_COMPRESSED is not set
-CONFIG_SLHC=m
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
-# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
-# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
CONFIG_BCM47XX_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=y
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_DRIVER_EXTIF=y
CONFIG_SSB_DRIVER_GIGE=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_MIPS=y
-CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_SSB is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
CONFIG_USB_U132_HCD=m
-# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
-# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
-# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=m
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LT3593 is not set
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
-# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
-# CONFIG_GFS2_FS_LOCKING_DLM is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
-# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_SPINLOCK_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Tue Mar 23 10:36:32 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
CONFIG_BCM63XX=y
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-
-#
-# CPU support
-#
CONFIG_BCM63XX_CPU_6338=y
CONFIG_BCM63XX_CPU_6345=y
CONFIG_BCM63XX_CPU_6348=y
CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BOARD_BCM963XX=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-# CONFIG_YENTA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
CONFIG_PCMCIA_BCM63XX=y
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
-# CONFIG_MAC80211_RC_PID is not set
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
CONFIG_BCM63XX_PHY=y
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
CONFIG_BCM63XX_ENET=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_ATH_COMMON is not set
CONFIG_B43=y
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-# CONFIG_B43_PCMCIA is not set
-CONFIG_B43_PIO=y
# CONFIG_B43_PHY_LP is not set
-CONFIG_B43_LEDS=y
-# CONFIG_B43_DEBUG is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=y
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-# CONFIG_SSB_PCMCIAHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LT3593 is not set
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_FILE_LOCKING is not set
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc3
-# Sat Apr 3 16:32:11 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
CONFIG_SIBYTE_BIGSUR=y
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_SIBYTE_BCM1x80=y
-CONFIG_SIBYTE_SB1xxx_SOC=y
-# CONFIG_CPU_SB1_PASS_1 is not set
-# CONFIG_CPU_SB1_PASS_2_1250 is not set
-# CONFIG_CPU_SB1_PASS_2_2 is not set
-# CONFIG_CPU_SB1_PASS_4 is not set
-# CONFIG_CPU_SB1_PASS_2_112x is not set
-# CONFIG_CPU_SB1_PASS_3 is not set
-# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
-# CONFIG_SB1_CERR_STALL is not set
-# CONFIG_SIBYTE_CFE_CONSOLE is not set
-# CONFIG_SIBYTE_BUS_WATCHER is not set
-# CONFIG_SIBYTE_TBPROF is not set
-CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_BCM1480=y
-CONFIG_CSRC_BCM1480=y
-CONFIG_CFE=y
-CONFIG_DMA_COHERENT=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-CONFIG_CPU_SB1=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_HAS_CPU_SB1=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
CONFIG_64BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_SIBYTE_DMA_PAGEOPS is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_SMP=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_NR_CPUS_DEFAULT_4=y
-CONFIG_NR_CPUS=4
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_SYSCALL_WRAPPERS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_DEBUG=y
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
-CONFIG_ZONE_DMA32=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_RUNTIME is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
-CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
-
-#
-# IPVS scheduler
-#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=y
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=y
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
-# CONFIG_SCTP_HMAC_MD5 is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
-CONFIG_GARP=m
CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
CONFIG_AX25=m
-CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_YAM=m
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
CONFIG_BLK_DEV_IT8213=m
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=y
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
CONFIG_SB1250_MAC=y
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-CONFIG_MDIO=m
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_STALDRV is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_SIBYTE=y
-# CONFIG_I2C_STUB is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=m
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=m
-CONFIG_JBD2=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_SB1XXX_CORELIS is not set
-# CONFIG_RUNTIME_DEBUG is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
-# CONFIG_SECURITY_PATH is not set
-CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-# CONFIG_SECURITY_SMACK is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Wed Aug 8 10:23:16 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_TANBAC_TB022X is not set
-# CONFIG_VICTOR_MPC30X is not set
CONFIG_ZAO_CAPCELLA=y
-CONFIG_PCI_VR41XX=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_VR41XX=y
CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Wed Dec 3 11:00:58 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD=y
-CONFIG_CAVIUM_OCTEON_SPECIFIC_OPTIONS=y
-# CONFIG_CAVIUM_OCTEON_2ND_KERNEL is not set
-CONFIG_CAVIUM_OCTEON_HW_FIX_UNALIGNED=y
CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE=2
-CONFIG_CAVIUM_OCTEON_LOCK_L2=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_COHERENT=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_CPU_OCTEON=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=7
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_CAVIUM_OCTEON=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_WEAK_REORDERING_BEYOND_LLSC=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
-CONFIG_64BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_SMP=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_NR_CPUS_DEFAULT_16=y
-CONFIG_NR_CPUS=16
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
+# CONFIG_EARLY_PRINTK is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Fri Jul 25 10:25:34 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
CONFIG_MIPS_COBALT=y
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_GT641XX=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_I8259=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_GT641XX=y
-CONFIG_PCI_GT64XXX_PCI0=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-CONFIG_CPU_NEVADA=y
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-CONFIG_MMU=y
-CONFIG_I8253=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=y
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_COBALT_BTNS=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_COBALT=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_COBALT_QUBE=y
CONFIG_LEDS_COBALT_RAQ=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4DEV_FS=y
-CONFIG_EXT4DEV_FS_XATTR=y
-CONFIG_EXT4DEV_FS_POSIX_ACL=y
-CONFIG_EXT4DEV_FS_SECURITY=y
-CONFIG_JBD=y
-CONFIG_JBD2=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Fri Feb 26 08:46:14 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
CONFIG_MIPS_ALCHEMY=y
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-CONFIG_MIPS_DB1000=y
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_SOC_AU1000=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-db1000"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_AU1X00=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AU1XXX=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
CONFIG_DEBUG_ZBOOT=y
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Fri Feb 26 08:50:15 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
CONFIG_MIPS_ALCHEMY=y
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_DB1000 is not set
CONFIG_MIPS_DB1100=y
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_SOC_AU1100=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-db1100"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_AU1X00=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_AU1100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AU1XXX=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
CONFIG_DEBUG_ZBOOT=y
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Fri Feb 26 10:18:09 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
CONFIG_MIPS_ALCHEMY=y
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
CONFIG_MIPS_DB1200=y
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_SOC_AU1200=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DMA_COHERENT=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-db1200"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_AU1550 is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_UB=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
# CONFIG_IDE_PROC_FS is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDE_AU1XXX=y
-CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
-# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_MIPS_AU1X00_ENET is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_AU1X00=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_AU1550=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_AU1550=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM70=y
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_AU1200=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_MIPS is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_PCMCIA is not set
CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_AU1XPSC=y
-CONFIG_SND_SOC_AU1XPSC_I2S=y
-CONFIG_SND_SOC_AU1XPSC_AC97=y
CONFIG_SND_SOC_DB1200=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AC97_CODEC=y
-CONFIG_SND_SOC_WM8731=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_AU1X=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AU1XXX=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_EARLY_PRINTK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
CONFIG_DEBUG_ZBOOT=y
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Fri Feb 26 08:46:33 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
CONFIG_MIPS_ALCHEMY=y
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
CONFIG_MIPS_DB1500=y
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_SOC_AU1500=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-db1500"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
# CONFIG_CARDBUS is not set
-
-#
-# PC-card bridges
-#
-# CONFIG_YENTA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_AU1X00=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AU1XXX=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
CONFIG_DEBUG_ZBOOT=y
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Fri Feb 26 08:58:22 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
CONFIG_MIPS_ALCHEMY=y
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
CONFIG_MIPS_DB1550=y
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_SOC_AU1550=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-db1550"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
# CONFIG_CARDBUS is not set
-
-#
-# PC-card bridges
-#
-# CONFIG_YENTA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_AU1550=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_AU1X00=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_AU1550=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_AU1550=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_HRTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_PCI is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_MIPS is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_PCMCIA is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AU1XPSC=y
-# CONFIG_SND_SOC_DB1200 is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AU1XXX=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
# CONFIG_JFFS2_FS_POSIX_ACL is not set
# CONFIG_JFFS2_FS_SECURITY is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
CONFIG_DEBUG_ZBOOT=y
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:28 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
CONFIG_MACH_DECSTATION=y
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_R3000=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R3000=y
-CONFIG_SYS_HAS_CPU_R4X00=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_CPU_HAS_WB=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_128=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_128HZ=y
-CONFIG_SYS_SUPPORTS_256HZ=y
-CONFIG_SYS_SUPPORTS_1024HZ=y
-CONFIG_HZ=128
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
CONFIG_TC=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-CONFIG_FIB_RULES=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_DECNCR=y
-# CONFIG_SCSI_DECSII is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_DM9000 is not set
CONFIG_DECLANCE=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
-CONFIG_DEFXX_MMIO=y
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_SERIAL_DEC=y
-CONFIG_SERIAL_DEC_CONSOLE=y
-CONFIG_ZS=y
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
# CONFIG_SERIAL_DZ is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PMAG_AA is not set
CONFIG_FB_PMAG_BA=y
CONFIG_FB_PMAGB_B=y
-# CONFIG_FB_MAXINE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_DEC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-CONFIG_ULTRIX_PARTITION=y
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Wed Aug 8 10:36:25 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
CONFIG_CASIO_E55=y
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_TANBAC_TB022X is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ISA=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_VR41XX=y
CONFIG_SERIAL_VR41XX_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
CONFIG_GPIO_VR41XX=y
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Fri Oct 16 13:18:01 2009
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
CONFIG_MACH_LOONGSON=y
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_LEMOTE_FULOONG2E=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_I8259=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_LOONGSON2E=y
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
-CONFIG_CPU_LOONGSON2=y
-CONFIG_SYS_HAS_CPU_LOONGSON2E=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
CONFIG_64BIT=y
-# CONFIG_PAGE_SIZE_4KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-CONFIG_PAGE_SIZE_16KB=y
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_WB=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-fuloong2e"
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
CONFIG_PID_NS=y
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_SYSCALL_WRAPPERS=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_ISA=y
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
# CONFIG_SUSPEND is not set
-CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/hda3"
-# CONFIG_PM_RUNTIME is not set
CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
CONFIG_PHONET=m
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
CONFIG_NET_9P=m
-# CONFIG_NET_9P_DEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TC35815 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_CDC_PHONET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=m
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_MIPS=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
CONFIG_HID_PID=y
-
-#
-# USB HID Boot Protocol drivers
-#
CONFIG_USB_KBD=y
CONFIG_USB_MOUSE=y
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
CONFIG_USB_WUSB_CBAF=m
-# CONFIG_USB_WUSB_CBAF_DEBUG is not set
-
-#
-# USB Host Controller Drivers
-#
CONFIG_USB_C67X00_HCD=m
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=m
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_ONETOUCH=y
-# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=m
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_VST=m
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_SERCOS3 is not set
-# CONFIG_UIO_PCI_GENERIC is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=936
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=m
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp936"
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_EXPERIMENTAL=y
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=2048
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_GHASH=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.35-rc6
-# Fri Jul 23 19:28:52 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
CONFIG_MIPS_ALCHEMY=y
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_XXS1500 is not set
CONFIG_MIPS_GPR=y
-CONFIG_SOC_AU1550=y
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_LOONGSON_MC146818 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
-CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=m
-
-#
-# Xtables targets
-#
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-
-#
-# Xtables matches
-#
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-# CONFIG_IP_VS_PROTO_SCTP is not set
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# DECnet: Netfilter Configuration
-#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
-# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=y
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-# CONFIG_L2TP is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_YAM=m
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
-CONFIG_MAC80211_HAS_RC=y
-# CONFIG_MAC80211_RC_PID is not set
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-# CONFIG_CAIF is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=m
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=m
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_IFB is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
CONFIG_ATH_COMMON=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH5K=y
CONFIG_ATH5K_DEBUG=y
-# CONFIG_ATH9K is not set
-# CONFIG_ATH9K_HTC is not set
-# CONFIG_AR9170_USB is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
-# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
-# CONFIG_ATM_NICSTAR_USE_SUNI is not set
-# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
-# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
-# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
-# CONFIG_ATM_FORE200E_USE_TASKLET is not set
-CONFIG_ATM_FORE200E_TX_RETRY=16
-CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_N_GSM is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_AU1550 is not set
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-# CONFIG_GPIO_RDC321X is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-
-#
-# MODULbus GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_EMC1403 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP102 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-# CONFIG_SSB_B43_PCI_BRIDGE is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_MFD_SUPPORT=y
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TC35892 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_BACKLIGHT_ADP8860 is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CANDO is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EGALAX is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_ROCCAT_KONE is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_ZIO is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
# CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_LKDTM is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw ip=auto"
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_SPINLOCK_TEST is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Fri Nov 28 15:41:33 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-CONFIG_SGI_IP22=y
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_ARC=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_I8259=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SGI_HAS_INDYDOG=y
-CONFIG_SGI_HAS_HAL2=y
-CONFIG_SGI_HAS_SEEQ=y
-CONFIG_SGI_HAS_WD93=y
-CONFIG_SGI_HAS_ZILOG=y
-CONFIG_SGI_HAS_I8042=y
-CONFIG_DEFAULT_SGI_PARTITION=y
-CONFIG_ARC32=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=7
CONFIG_ARC_CONSOLE=y
-CONFIG_ARC_PROMLIB=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
CONFIG_CPU_R5000=y
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R4X00=y
-CONFIG_SYS_HAS_CPU_R5000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_IP22_CPU_SCACHE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_EISA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_EISA is not set
-CONFIG_MMU=y
-CONFIG_I8253=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT=y
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_PHONET=m
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
-# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_PHONET=m
-CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_RFKILL=m
-CONFIG_RFKILL_INPUT=m
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=m
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
CONFIG_SGISEEQ=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_IWLWIFI_LEDS is not set
CONFIG_HOSTAP=m
-# CONFIG_HOSTAP_FIRMWARE is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_PS2_ALPS is not set
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
-# CONFIG_MOUSE_PS2_LIFEBOOK is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_IP22_ZILOG=m
-CONFIG_SERIAL_CORE=m
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=m
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_INDYDOG=m
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
CONFIG_SGI_NEWPORT_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
CONFIG_HID_PID=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
-CONFIG_EXT4DEV_COMPAT=y
-CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
-CONFIG_JBD=y
-CONFIG_JBD2=m
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=m
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_UPCALL=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-
-#
-# Tracers
-#
-CONFIG_DYNAMIC_PRINTK_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Wed Feb 3 18:12:31 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
CONFIG_SGI_IP27=y
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_SGI_SN_M_MODE=y
-# CONFIG_SGI_SN_N_MODE is not set
-# CONFIG_MAPPED_KERNEL is not set
-# CONFIG_REPLICATE_KTEXT is not set
-# CONFIG_REPLICATE_EXHANDLERS is not set
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARC=y
-CONFIG_DMA_COHERENT=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_DEFAULT_SGI_PARTITION=y
-CONFIG_MIPS_L1_CACHE_SHIFT=7
-CONFIG_ARC64=y
-CONFIG_BOOT_ELF64=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-CONFIG_CPU_R10000=y
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_HAS_CPU_R10000=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
-CONFIG_64BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_NUMA=y
-CONFIG_SYS_SUPPORTS_NUMA=y
-CONFIG_NODES_SHIFT=6
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SMP=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_NR_CPUS_DEFAULT_64=y
-CONFIG_NR_CPUS=64
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_MIPS_INSANE_LARGE is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_SYSCALL_WRAPPERS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_CGROUP is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CFQ_GROUP_IOSCHED is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
-# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
-# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_ACT_SKBEDIT=m
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
-CONFIG_RFKILL_LEDS=y
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_OSD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_EEPROM_93CX6=m
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
-# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_3W_SAS=m
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_DPT_I2O=m
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT2SAS=m
-CONFIG_SCSI_MPT2SAS_MAX_SGE=128
-# CONFIG_SCSI_MPT2SAS_LOGGING is not set
-# CONFIG_SCSI_HPTIOP is not set
CONFIG_LIBFC=m
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=m
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=y
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_RAID6_PQ=y
-# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
CONFIG_IFB=m
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
CONFIG_VETH=m
-# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
-# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_AX88796=m
CONFIG_AX88796_93CX6=y
CONFIG_SGI_IOC3_ETH=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
CONFIG_ETHOC=m
CONFIG_SMSC911X=m
CONFIG_DNET=m
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
-CONFIG_KS8842=m
CONFIG_KS8851_MLL=m
CONFIG_ATL2=m
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_IGBVF=m
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
CONFIG_VIA_VELOCITY=m
-# CONFIG_TIGON3 is not set
-CONFIG_BNX2=m
-CONFIG_CNIC=m
CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_JME=m
-CONFIG_NETDEV_10000=y
-CONFIG_MDIO=m
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-CONFIG_CHELSIO_T3=m
CONFIG_ENIC=m
CONFIG_IXGBE=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
CONFIG_VXGE=m
-# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
-# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_EN=m
-CONFIG_MLX4_CORE=m
# CONFIG_MLX4_DEBUG is not set
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
CONFIG_QLGE=m
CONFIG_SFC=m
CONFIG_BE2NET=m
-# CONFIG_TR is not set
-CONFIG_WLAN=y
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PRISM54=m
CONFIG_RTL8180=m
CONFIG_ADM8211=m
-# CONFIG_MAC80211_HWSIM is not set
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
-# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
-CONFIG_ATH9K_HW=m
-CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K=m
CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_LEDS=y
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
-CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
-CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLWIFI=m
-CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
-# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
CONFIG_IWL3945=m
-CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_HERMES=m
# CONFIG_HERMES_CACHE_FW_ON_INIT is not set
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
-CONFIG_PCI_HERMES=m
CONFIG_P54_COMMON=m
CONFIG_P54_PCI=m
-CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
-CONFIG_RT2800PCI_PCI=m
CONFIG_RT2800PCI=m
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
CONFIG_WL12XX=m
CONFIG_WL1251=m
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=m
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
-
-#
-# External I2C/SMBus adapter drivers
-#
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
-
-#
-# Other I2C/SMBus bus drivers
-#
-CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_TSL2550=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
CONFIG_PPS=m
-# CONFIG_PPS_DEBUG is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=m
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-CONFIG_MFD_WM8350=m
-CONFIG_MFD_WM8350_I2C=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
-CONFIG_AB3100_CORE=m
-CONFIG_AB3100_OTP=m
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_WM8350=m
CONFIG_LEDS_BD2802=m
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=y
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_WM8350 is not set
-# CONFIG_RTC_DRV_PCF50633 is not set
-CONFIG_RTC_DRV_AB3100=m
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
-# CONFIG_UIO_CIF is not set
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-CONFIG_UIO_SMX=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-CONFIG_JBD2=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=m
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
CONFIG_EXOFS_FS=m
-# CONFIG_EXOFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
-# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc1
-# Mon Feb 11 15:58:54 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
CONFIG_SGI_IP28=y
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_ARC=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_I8259=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SGI_HAS_INDYDOG=y
-CONFIG_SGI_HAS_SEEQ=y
-CONFIG_SGI_HAS_WD93=y
-CONFIG_SGI_HAS_ZILOG=y
-CONFIG_SGI_HAS_I8042=y
-CONFIG_DEFAULT_SGI_PARTITION=y
-CONFIG_MIPS_L1_CACHE_SHIFT=7
CONFIG_ARC_CONSOLE=y
-CONFIG_ARC_PROMLIB=y
-CONFIG_ARC64=y
-CONFIG_BOOT_ELF64=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-CONFIG_CPU_R10000=y
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R10000=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
-CONFIG_64BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_RCU_TRACE is not set
-# CONFIG_MIPS_INSANE_LARGE is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_EISA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ISA=y
CONFIG_EISA=y
-CONFIG_EISA_NAMES=y
-CONFIG_MMU=y
-CONFIG_I8253=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_AHA1740 is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SIM710 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
CONFIG_SGISEEQ=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
-# CONFIG_MOUSE_PS2_LIFEBOOK is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_IP22_ZILOG=y
CONFIG_SERIAL_IP22_ZILOG_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_INDYDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Wed Dec 10 14:39:08 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
CONFIG_SGI_IP32=y
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_ARC=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_ARC32=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_ARC_MEMORY=y
-CONFIG_ARC_PROMLIB=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-CONFIG_CPU_R5000=y
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R5000=y
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
-CONFIG_64BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_R5000_CPU_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=y
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SGI_O2MACE_ETH=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_MACEPS2=y
-CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_VIVI=m
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_UVESA is not set
CONFIG_FB_GBE=y
-CONFIG_FB_GBE_MEM=4
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:33 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
CONFIG_MACH_JAZZ=y
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_ACER_PICA_61 is not set
-# CONFIG_MIPS_MAGNUM_4000 is not set
CONFIG_OLIVETTI_M700=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARC=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_I8259=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_ARC32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_ARC_MEMORY=y
-CONFIG_ARC_PROMLIB=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-CONFIG_CPU_R4X00=y
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R4X00=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_100HZ=y
-CONFIG_HZ=100
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_ISA=y
-CONFIG_MMU=y
-CONFIG_PCSPEAKER=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-
-#
-# DECnet: Netfilter Configuration
-#
CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
CONFIG_BRIDGE=m
-# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
CONFIG_AX25=m
-CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_YAM is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
-
-#
-# Parallel IDE high-level drivers
-#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_TGT=m
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
CONFIG_ISCSI_TCP=m
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_JAZZ_ESP=y
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MIPS_JAZZ_SONIC=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
-# CONFIG_E2100 is not set
-# CONFIG_EWRK3 is not set
-# CONFIG_EEXPRESS is not set
-# CONFIG_EEXPRESS_PRO is not set
-# CONFIG_HPLAN_PLUS is not set
-# CONFIG_HPLAN is not set
-# CONFIG_LP486E is not set
-# CONFIG_ETH16I is not set
CONFIG_NE2000=m
-# CONFIG_SEEQ8005 is not set
CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
CONFIG_PLIP=m
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
-CONFIG_TIPAR=m
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_RTC=m
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-
-#
-# Hardware Monitoring support
-#
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-# CONFIG_KS0108 is not set
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
-# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
-# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
-CONFIG_CODA_FS_OLD_API=y
CONFIG_AFS_FS=m
-CONFIG_RXRPC=m
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Wed Mar 4 23:07:16 2009
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
CONFIG_MACH_TX39XX=y
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_MACH_TXX9=y
CONFIG_TOSHIBA_JMR3927=y
-CONFIG_SOC_TX3927=y
-# CONFIG_TOSHIBA_FPCIB0 is not set
-CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_TXX9=y
-CONFIG_GPIO_TXX9=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_TXX9=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-CONFIG_CPU_TX39XX=y
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_HAS_CPU_TX39XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_STUB is not set
-CONFIG_MMU=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
-#
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
CONFIG_TC35815=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_TXX9=y
-CONFIG_HAS_TXX9_SERIAL=y
-CONFIG_SERIAL_TXX9_NR_UARTS=6
CONFIG_SERIAL_TXX9_CONSOLE=y
CONFIG_SERIAL_TXX9_STDSERIAL=y
-# CONFIG_SERIAL_JSM is not set
# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
CONFIG_TXX9_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc3
-# Sat Aug 18 17:37:58 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
CONFIG_LASAT=y
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
CONFIG_PICVUE=y
CONFIG_PICVUE_PROC=y
CONFIG_DS1603=y
CONFIG_LASAT_SYSCTL=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_MIPS_NILE4=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_PCI_GT64XXX_PCI0=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-CONFIG_CPU_R5000=y
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R5000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_R5000_CPU_SCACHE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_LASAT=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan 4 13:41:09 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
CONFIG_MACH_LOONGSON=y
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-# CONFIG_LEMOTE_FULOONG2E is not set
CONFIG_LEMOTE_MACH2F=y
-CONFIG_CS5536=y
CONFIG_CS5536_MFGPT=y
-CONFIG_LOONGSON_SUSPEND=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_I8259=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-CONFIG_CPU_LOONGSON2F=y
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_CPU_LOONGSON2=y
-CONFIG_SYS_HAS_CPU_LOONGSON2F=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_CPUFREQ=y
-CONFIG_CPU_SUPPORTS_ADDRWINCFG=y
-CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
CONFIG_64BIT=y
-# CONFIG_PAGE_SIZE_4KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-CONFIG_PAGE_SIZE_16KB=y
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_WB=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_KEXEC=y
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_SYSCALL_WRAPPERS=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_ISA=y
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/hda3"
CONFIG_PM_RUNTIME=y
-CONFIG_MIPS_EXTERNAL_TIMER=y
-CONFIG_MIPS_CPUFREQ=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# CPUFreq processor drivers
-#
CONFIG_LOONGSON2_CPUFREQ=m
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
-# CONFIG_DEFAULT_CUBIC is not set
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_INGRESS is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-# CONFIG_NET_EMATCH_U32 is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=m
-# CONFIG_MAC80211_RC_PID is not set
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
-CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_IFB is not set
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TC35815 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
CONFIG_R8169_VLAN=y
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=m
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
-CONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_STALDRV is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=16
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=y
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
-# CONFIG_SERIAL_8250_SHARE_IRQ is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
CONFIG_THERMAL=y
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
-
-#
-# Multimedia core support
-#
CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_IR_CORE=m
-CONFIG_VIDEO_IR=m
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_VIVI=m
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
-# CONFIG_USB_GL860 is not set
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
-# CONFIG_USB_GSPCA_JEILINJ is not set
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_PAC207=m
-# CONFIG_USB_GSPCA_PAC7302 is not set
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SN9C20X_EVDEV=y
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_STK014=m
-# CONFIG_USB_GSPCA_STV0680 is not set
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_ZC3XX=m
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
CONFIG_USB_ET61X251=m
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
CONFIG_USB_SN9C102=m
-# CONFIG_USB_STV680 is not set
-CONFIG_USB_ZC0301=m
-# CONFIG_USB_PWC is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_BOOT_VESA_SUPPORT=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
-# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=10
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
CONFIG_SND_CS5535AUDIO=m
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_MIPS is not set
-CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_WACOM=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-CONFIG_USB_WUSB=m
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=m
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-CONFIG_UWB=m
-CONFIG_UWB_HWA=m
-CONFIG_UWB_WHCI=m
-# CONFIG_UWB_WLP is not set
-# CONFIG_UWB_I1480U is not set
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_ET131X is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_ECHO is not set
-# CONFIG_OTUS is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_ALTERA_PCIE_CHDMA is not set
-# CONFIG_R8187SE is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_INPUT_MIMIO is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Qualcomm MSM Camera And Video
-#
-
-#
-# Camera Sensor Selection
-#
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_B3DFG is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_VME_BUS is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_IIO is not set
-# CONFIG_RAMZSWAP is not set
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
CONFIG_FB_SM7XX=y
-# CONFIG_FB_SM7XX_ACCEL is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
-# CONFIG_BTRFS_FS_POSIX_ACL is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
CONFIG_FSCACHE=m
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_FSCACHE is not set
CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_ASYNC_PQ=m
-CONFIG_ASYNC_RAID6_RECOV=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_CTR=m
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Mon Dec 1 08:08:19 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
CONFIG_MIPS_MALTA=y
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_BOOT_RAW=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_I8259=y
-CONFIG_MIPS_BONITO64=y
-CONFIG_MIPS_MSC=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_GIC=y
-CONFIG_MIPS_BOARDS_GEN=y
-CONFIG_PCI_GT64XXX_PCI0=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_MIPS_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT_DISABLED is not set
CONFIG_MIPS_MT_SMP=y
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_MIPS_MT=y
-# CONFIG_SCHED_SMT is not set
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_MIPS_MT_FPAFF=y
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_NR_CPUS_DEFAULT_2=y
-CONFIG_NR_CPUS=2
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
-# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-CONFIG_MMU=y
-CONFIG_I8253=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
-# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
-CONFIG_GARP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_PHONET=m
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
-# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_PHONET=m
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_RFKILL=m
-CONFIG_RFKILL_INPUT=m
-CONFIG_RFKILL_LEDS=y
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
+CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT8213=m
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_FC_TGT_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_AX88796=m
-# CONFIG_AX88796_93CX6 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
CONFIG_TC35815=m
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_WLAN_80211=y
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PRISM54=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
-CONFIG_PCI_HERMES=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PRISM54=m
-# CONFIG_RTL8180 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH9K is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:29 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
CONFIG_NEC_MARKEINS=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SOC_EMMA2RH=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-CONFIG_CPU_R5000=y
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R5000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-CONFIG_IPV6_MIP6=y
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
CONFIG_NF_CONNTRACK_IPV6=m
-# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-CONFIG_FIB_RULES=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_RTC=m
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
CONFIG_I2C_DEBUG_CORE=y
-# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT=""
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
+CONFIG_CRYPTO_FCRYPT=m
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 22:45:52 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_SIM=y
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_BOOT_RAW=y
-CONFIG_CEVT_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
CONFIG_MIPS_SIM_NET=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Wed Aug 8 15:09:51 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_TANBAC_TB022X is not set
CONFIG_VICTOR_MPC30X=y
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-# CONFIG_SCTP_HMAC_MD5 is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_MISC_DEVICES is not set
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_VR41XX=y
CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Thu Apr 26 18:11:29 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
CONFIG_PMC_MSP=y
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_PMC_MSP4200_EVAL is not set
-# CONFIG_PMC_MSP4200_GW is not set
-# CONFIG_PMC_MSP7120_EVAL is not set
CONFIG_PMC_MSP7120_GW=y
-# CONFIG_PMC_MSP7120_FPGA is not set
-
-#
-# Options for PMC-Sierra MSP chipsets
-#
-CONFIG_PMC_MSP_EMBEDDED_ROOTFS=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_BOOT_RAW=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_MSP_CIC=y
-CONFIG_MSP_USB=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-pmc"
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
# CONFIG_SHMEM is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-CONFIG_NETFILTER_XTABLES=y
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
CONFIG_BRIDGE=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PMC_MSP_EVM=y
-CONFIG_MSP_FLASH_MAP_LIMIT_32M=y
-CONFIG_MSP_FLASH_MAP_LIMIT=0x02000000
-CONFIG_MTD_PMC_MSP_RAMROOT=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_MSPETH=y
-CONFIG_MSPETH_NAPI=y
-# CONFIG_MSPETH_SKB_RECYCLE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_PMCMSP_GPIO=y
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_PMCMSP=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-CONFIG_PMCTWILED=y
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB_HID is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_SQUASHFS_VMALLOC=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_CROSSCOMPILE=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
-# CONFIG_MIPS_UNCACHED is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc6
-# Sat May 1 13:39:10 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
CONFIG_MIPS_ALCHEMY=y
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
CONFIG_MIPS_MTX1=y
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_SOC_AU1500=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
-# CONFIG_PCMCIA_AU1X00 is not set
-# CONFIG_PCMCIA_ALCHEMY_DEVBOARD is not set
-CONFIG_PCCARD_NONSTATIC=m
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=m
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-# CONFIG_IP_VS_PROTO_SCTP is not set
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
-
-#
-# DECnet: Netfilter Configuration
-#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
-# CONFIG_BRIDGE_EBT_IP6 is not set
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
-# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=y
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_YAM=m
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
-# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
-# CONFIG_BT_MRVL is not set
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-# CONFIG_RXKAD is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=m
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_TIFM_CORE=m
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=m
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-# CONFIG_VETH is not set
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_MIPS_AU1X00_ENET is not set
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
-CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_KSZ884X_PCI is not set
CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
-# CONFIG_FORCEDETH_NAPI is not set
-# CONFIG_TC35815 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
-# CONFIG_SMSC9420 is not set
CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
CONFIG_VIA_RHINE=m
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
-# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
-# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
-# CONFIG_CNIC is not set
CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-CONFIG_MDIO=m
CONFIG_CHELSIO_T1=m
-# CONFIG_CHELSIO_T1_1G is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
CONFIG_IXGB=m
CONFIG_S2IO=m
-# CONFIG_VXGE is not set
CONFIG_MYRI10GE=m
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_IPHETH is not set
CONFIG_USB_SIERRA_NET=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
-# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
-# CONFIG_ATM_NICSTAR_USE_SUNI is not set
-# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
-# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
-# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
-# CONFIG_ATM_FORE200E_USE_TASKLET is not set
-CONFIG_ATM_FORE200E_TX_RETRY=16
-CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
-# CONFIG_ATM_SOLOS is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
-# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
-# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
-# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
-# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=48
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
-# CONFIG_SERIAL_8250_AU1X00 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_JSM=m
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
-# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
-# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
-# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_MAX1619=m
-# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=m
-# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SIS5595=m
-# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
-# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=m
-# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
CONFIG_WDT_MTX1=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-# CONFIG_SSB_B43_PCI_BRIDGE is not set
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-# CONFIG_SSB_PCMCIAHOST is not set
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_RAWMIDI_SEQ=m
-CONFIG_SND_OPL3_LIB_SEQ=m
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_EMU10K1_SEQ=m
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_VX_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALI5451=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
-# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
-# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
-# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_HDA_INTEL=m
-# CONFIG_SND_HDA_HWDEP is not set
-# CONFIG_SND_HDA_INPUT_BEEP is not set
-# CONFIG_SND_HDA_INPUT_JACK is not set
-# CONFIG_SND_HDA_PATCH_LOADER is not set
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_ATIHDMI=y
-CONFIG_SND_HDA_CODEC_NVHDMI=y
-CONFIG_SND_HDA_CODEC_INTELHDMI=y
-CONFIG_SND_HDA_ELD=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
-# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
-# CONFIG_SND_HIFIER is not set
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
-# CONFIG_SND_LX6464ES is not set
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
-# CONFIG_SND_VIRTUOSO is not set
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
-CONFIG_SND_MIPS=y
-# CONFIG_SND_AU1X00 is not set
-CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
-# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=m
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_SSB is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
-# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=m
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
-# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
-# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=m
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_SDHCI=m
-# CONFIG_MMC_SDHCI_PCI is not set
-# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_TIFM_SD=m
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
CONFIG_RTC_DRV_DS1307=m
-# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
-# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
-# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=m
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=m
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AU1XXX is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
-# CONFIG_ACORN_PARTITION_ADFS is not set
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_LKDTM is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_SPINLOCK_TEST is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Fri Feb 26 09:53:29 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
CONFIG_MIPS_ALCHEMY=y
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_PB1000 is not set
CONFIG_MIPS_PB1100=y
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_SOC_AU1100=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-pb1100"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_UB=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
# CONFIG_IDE_PROC_FS is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_AU1X00=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AU1XXX=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
# CONFIG_JFFS2_FS_POSIX_ACL is not set
# CONFIG_JFFS2_FS_SECURITY is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
CONFIG_DEBUG_ZBOOT=y
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Fri Feb 26 10:23:34 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
CONFIG_MIPS_ALCHEMY=y
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
CONFIG_MIPS_PB1200=y
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_SOC_AU1200=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-pb1200"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_AU1550 is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_UB=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
# CONFIG_IDE_PROC_FS is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDE_AU1XXX=y
-CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
-# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_MIPS_AU1X00_ENET is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_AU1X00=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_AU1550=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_AU1550=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM70=y
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_AU1200=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_MIPS is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_PCMCIA is not set
CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_AU1XPSC=y
-CONFIG_SND_SOC_AU1XPSC_I2S=y
-CONFIG_SND_SOC_AU1XPSC_AC97=y
CONFIG_SND_SOC_DB1200=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AC97_CODEC=y
-CONFIG_SND_SOC_WM8731=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_AU1X=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AU1XXX=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_EARLY_PRINTK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
CONFIG_DEBUG_ZBOOT=y
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Fri Feb 26 10:05:27 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
CONFIG_MIPS_ALCHEMY=y
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
CONFIG_MIPS_PB1500=y
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_SOC_AU1500=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-pb1500"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
# CONFIG_CARDBUS is not set
-
-#
-# PC-card bridges
-#
-# CONFIG_YENTA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_AU1X00=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AU1XXX=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
CONFIG_DEBUG_ZBOOT=y
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Fri Feb 26 10:06:07 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
CONFIG_MIPS_ALCHEMY=y
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
CONFIG_MIPS_PB1550=y
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_SOC_AU1550=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-pb1550"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
# CONFIG_CARDBUS is not set
-
-#
-# PC-card bridges
-#
-# CONFIG_YENTA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_AU1550=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_AU1X00=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_AU1550=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AU1XXX=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
CONFIG_DEBUG_ZBOOT=y
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Sat Jul 26 09:02:59 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
CONFIG_NXP_STB225=y
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SOC_PNX833X=y
-CONFIG_SOC_PNX8335=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
CONFIG_HZ_128=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=128
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
CONFIG_MTD_CFI_LE_BYTE_SWAP=y
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x18000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
# CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PNX8XXX=y
CONFIG_SERIAL_PNX8XXX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=y
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-CONFIG_DVB_TDA1004X=y
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_MIPS=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_KERNEL_TESTS is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_PRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:38 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
CONFIG_PNX8550_JBS=y
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_PNX8550=y
-CONFIG_SOC_PNX8550=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
CONFIG_BLK_DEV_IT8213=m
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_TGT=m
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PNX8XXX=y
CONFIG_SERIAL_PNX8XXX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB_HID is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NFSD=m
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SLAB_LEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_DES is not set
-CONFIG_CRYPTO_FCRYPT=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:38 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
CONFIG_PNX8550_STB810=y
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_PNX8550=y
-CONFIG_SOC_PNX8550=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
CONFIG_BLK_DEV_IT8213=m
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PNX8XXX is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB_HID is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NFSD=m
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SLAB_LEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_DES is not set
-CONFIG_CRYPTO_FCRYPT=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.35-rc3
-# Thu Jul 1 11:03:28 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
CONFIG_POWERTV=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_MIN_RUNTIME_RESOURCES is not set
-# CONFIG_BOOTLOADER_DRIVER is not set
CONFIG_BOOTLOADER_FAMILY="R2"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_POWERTV=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_HIGHMEM is not set
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE="mips-linux-"
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
-CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=y
-
-#
-# Xtables combined modules
-#
-# CONFIG_NETFILTER_XT_MARK is not set
-
-#
-# Xtables targets
-#
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-
-#
-# Xtables matches
-#
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=y
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_TARGET_LOG is not set
CONFIG_IP6_NF_FILTER=y
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_RAW is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_L2TP is not set
-CONFIG_STP=y
CONFIG_BRIDGE=y
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-
-#
-# Some wireless drivers require a rate control algorithm
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-# CONFIG_CAIF is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_DENALI is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_RICOH is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-
-#
-# Controllers with non-SFF native interface
-#
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_AHCI_PLATFORM is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-
-#
-# SFF controllers with custom DMA interface
-#
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_SX4 is not set
-CONFIG_ATA_BMDMA=y
-
-#
-# SATA SFF controllers with BMDMA
-#
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-
-#
-# PATA SFF controllers with BMDMA
-#
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-
-#
-# PIO-only SFF controllers
-#
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_RZ1000 is not set
-
-#
-# Generic fallback / legacy drivers
-#
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_N_GSM is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_RAMOOPS is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
# CONFIG_MFD_SUPPORT is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CANDO is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EGALAX is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_ROCCAT_KONE is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=y
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_ZIO is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
# CONFIG_EARLY_PRINTK is not set
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE=""
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
-# CONFIG_SPINLOCK_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc6
-# Sat May 1 11:49:51 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
CONFIG_MIKROTIK_RB532=y
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_BOOT_RAW=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_PCI_QUIRKS is not set
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-# CONFIG_DEFAULT_CUBIC is not set
-# CONFIG_DEFAULT_HTCP is not set
-CONFIG_DEFAULT_VEGAS=y
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="vegas"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=y
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=m
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=m
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=y
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=y
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=y
CONFIG_BRIDGE=y
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_INGRESS is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
-# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-# CONFIG_AX25 is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_PRIV=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RB532=y
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_KORINA=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_TC35815 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
CONFIG_VIA_RHINE=y
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
CONFIG_ATMEL=m
-# CONFIG_PCI_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_RB532_BUTTON=y
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
CONFIG_RC32434_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
# CONFIG_HID is not set
-# CONFIG_HID_PID is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_MIKROTIK_RB532=y
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=y
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sun Nov 8 22:59:47 2009
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
CONFIG_MACH_TX49XX=y
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_MACH_TXX9=y
CONFIG_TOSHIBA_RBTX4927=y
CONFIG_TOSHIBA_RBTX4938=y
CONFIG_TOSHIBA_RBTX4939=y
-CONFIG_SOC_TX4927=y
-CONFIG_SOC_TX4938=y
-CONFIG_SOC_TX4939=y
-CONFIG_TXX9_7SEGLED=y
-# CONFIG_TOSHIBA_FPCIB0 is not set
-CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
-
-#
-# Multiplex Pin Select
-#
-# CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 is not set
-# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
-# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y
-CONFIG_PCI_TX4927=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_TXX9=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_CSRC_R4K=y
-CONFIG_GPIO_TXX9=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_TXX9=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-CONFIG_CPU_TX49XX=y
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_HAS_CPU_TX49XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-CONFIG_MMU=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_RBTX4939=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_TXX9NDFMC=m
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_TX4938=y
CONFIG_BLK_DEV_IDE_TX4939=y
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
CONFIG_NE2000=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
CONFIG_TC35815=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_TXX9=y
-CONFIG_HAS_TXX9_SERIAL=y
-CONFIG_SERIAL_TXX9_NR_UARTS=6
CONFIG_SERIAL_TXX9_CONSOLE=y
CONFIG_SERIAL_TXX9_STDSERIAL=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_TX4939=m
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_TXX9=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
CONFIG_TXX9_WDT=m
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_PCI is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_MIPS is not set
CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_TXX9ACLC=m
-CONFIG_HAS_TXX9_ACLC=y
-CONFIG_SND_SOC_TXX9ACLC_AC97=m
CONFIG_SND_SOC_TXX9ACLC_GENERIC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AC97_CODEC=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_DAC124S085 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=y
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_TX4939=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
CONFIG_TXX9_DMAC=m
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_HFSPLUS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:40 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
CONFIG_SNI_RM=y
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_ARC=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_I8259=y
-# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_ARC32=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=4
CONFIG_ARC_CONSOLE=y
-CONFIG_ARC_MEMORY=y
-CONFIG_ARC_PROMLIB=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-CONFIG_CPU_R4X00=y
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R4X00=y
-CONFIG_SYS_HAS_CPU_R5000=y
-CONFIG_SYS_HAS_CPU_R10000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_R5000_CPU_SCACHE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_EISA=y
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_ISA=y
-# CONFIG_EISA is not set
-CONFIG_MMU=y
-CONFIG_PCSPEAKER=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-
-#
-# DECnet: Netfilter Configuration
-#
CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
CONFIG_BRIDGE=m
-# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
CONFIG_AX25=m
-CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_YAM is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_FIB_RULES=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
-
-#
-# Parallel IDE high-level drivers
-#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_TGT=m
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_SNI_53C710 is not set
-# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
-# CONFIG_E2100 is not set
-# CONFIG_EWRK3 is not set
-# CONFIG_EEXPRESS is not set
-# CONFIG_EEXPRESS_PRO is not set
-# CONFIG_HPLAN_PLUS is not set
-# CONFIG_HPLAN is not set
-# CONFIG_LP486E is not set
-# CONFIG_ETH16I is not set
CONFIG_NE2000=m
-# CONFIG_SEEQ8005 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_PLIP=m
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PARKBD=m
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
-CONFIG_TIPAR=m
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_RTC=m
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_MASTER_DS2490 is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-
-#
-# Hardware Monitoring support
-#
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_USB_DABUSB=m
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=m
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-CONFIG_HID_FF=y
-CONFIG_HID_PID=y
-CONFIG_LOGITECH_FF=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_THRUSTMASTER_FF=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-# CONFIG_USB_ACECAD is not set
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-# CONFIG_USB_TOUCHSCREEN is not set
-CONFIG_USB_YEALINK=m
-CONFIG_USB_XPAD=m
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
CONFIG_USB_USS720=m
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-CONFIG_USB_SERIAL_AIRPRIME=m
-# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
-# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
-# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_TEST=m
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-# CONFIG_KS0108 is not set
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
-# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
-# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
-CONFIG_CODA_FS_OLD_API=y
CONFIG_AFS_FS=m
-CONFIG_RXRPC=m
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sat May 3 00:38:11 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
CONFIG_SIBYTE_SWARM=y
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_SIBYTE_SB1250=y
-CONFIG_SIBYTE_SB1xxx_SOC=y
-# CONFIG_CPU_SB1_PASS_1 is not set
-# CONFIG_CPU_SB1_PASS_2_1250 is not set
CONFIG_CPU_SB1_PASS_2_2=y
-# CONFIG_CPU_SB1_PASS_4 is not set
-# CONFIG_CPU_SB1_PASS_2_112x is not set
-# CONFIG_CPU_SB1_PASS_3 is not set
-CONFIG_SIBYTE_HAS_LDT=y
-CONFIG_SIBYTE_ENABLE_LDT_IF_PCI=y
-# CONFIG_SIMULATION is not set
-# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
-# CONFIG_SB1_CERR_STALL is not set
-CONFIG_SIBYTE_CFE=y
-# CONFIG_SIBYTE_CFE_CONSOLE is not set
-# CONFIG_SIBYTE_BUS_WATCHER is not set
-# CONFIG_SIBYTE_TBPROF is not set
-CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_CEVT_SB1250=y
-CONFIG_CSRC_SB1250=y
-CONFIG_CFE=y
-CONFIG_DMA_COHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-CONFIG_CPU_SB1=y
-CONFIG_SYS_HAS_CPU_SB1=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
CONFIG_64BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_SIBYTE_DMA_PAGEOPS is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_SB1_PASS_2_WORKAROUNDS=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
CONFIG_SMP=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_NR_CPUS_DEFAULT_2=y
-CONFIG_NR_CPUS=2
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_CGROUP_CPUACCT=y
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_PROC_PID_CPUSET is not set
+CONFIG_CGROUP_CPUACCT=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-CONFIG_MMU=y
-CONFIG_ZONE_DMA32=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
-# CONFIG_MIPS32_N32 is not set
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
-CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_MAC80211_RC_DEFAULT_PID=y
CONFIG_RFKILL=m
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=9220
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
-CONFIG_BLK_DEV_IDEFLOPPY=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDE_SWARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
CONFIG_SB1250_MAC=y
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH5K is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
+CONFIG_USB_OHCI_HCD=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_SB1XXX_CORELIS is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_SEQIV=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Mon May 12 11:54:51 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_CMBVR4133 is not set
-CONFIG_TANBAC_TB022X=y
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
CONFIG_TANBAC_TB0219=y
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0287 is not set
-CONFIG_PCI_VR41XX=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_TC35815 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_VIA_RHINE_NAPI is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
CONFIG_VIA_VELOCITY=y
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_VR41XX=y
CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
CONFIG_GPIO_TB0219=y
-CONFIG_GPIO_VR41XX=y
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_MON=m
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_VR41XX=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SAMPLES is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Mon May 12 11:53:54 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_CMBVR4133 is not set
-CONFIG_TANBAC_TB022X=y
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_TANBAC_TB0219 is not set
CONFIG_TANBAC_TB0226=y
-# CONFIG_TANBAC_TB0287 is not set
-CONFIG_PCI_VR41XX=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_TC35815 is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_VR41XX=y
CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_GPIO_TB0219 is not set
-CONFIG_GPIO_VR41XX=y
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=y
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_VR41XX=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SAMPLES is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=m
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Mon May 12 11:55:55 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_CMBVR4133 is not set
-CONFIG_TANBAC_TB022X=y
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_TANBAC_TB0219 is not set
-# CONFIG_TANBAC_TB0226 is not set
-CONFIG_TANBAC_TB0287=y
-CONFIG_PCI_VR41XX=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-CONFIG_DEFAULT_BIC=y
-# CONFIG_DEFAULT_CUBIC is not set
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="bic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-
-#
-# Controllers
-#
-
-#
-# Texas Instruments PCILynx requires I2C
-#
CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
-# CONFIG_I2O is not set
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_TC35815 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_VIA_RHINE_NAPI is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
CONFIG_VIA_VELOCITY=y
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_VR41XX=y
CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_GPIO_TB0219 is not set
CONFIG_GPIO_VR41XX=y
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
CONFIG_MFD_SM501=y
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
CONFIG_FB_SM501=y
-# CONFIG_FB_COBALT is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_MON=m
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SAMPLES is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Thu Aug 9 14:33:57 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CASIO_E55 is not set
CONFIG_IBM_WORKPAD=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_TANBAC_TB022X is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ISA=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
CONFIG_PCMCIA_VRC4171=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-# CONFIG_SCTP_HMAC_MD5 is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_IDE_GENERIC=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-CONFIG_HERMES=m
-# CONFIG_ATMEL is not set
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_VR41XX=y
CONFIG_SERIAL_VR41XX_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
CONFIG_GPIO_VR41XX=y
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:42 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
CONFIG_WR_PPMC=y
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_GT64120=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_FW_LOADER=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200n8"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:42 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
CONFIG_PMC_YOSEMITE=y
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_HYPERTRANSPORT is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_COHERENT=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_CPU_RM7K=y
-CONFIG_IRQ_CPU_RM9K=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-CONFIG_CPU_RM9000=y
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_RM9000=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_IRQ_PER_CPU=y
CONFIG_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
CONFIG_SMP=y
-CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS=2
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
CONFIG_SGI_IOC4=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_TITAN_GE=y
CONFIG_QLA3XXX=m
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_CROSSCOMPILE=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_RUNTIME_DEBUG is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
return 0;
}
-static inline int
-dma_get_cache_alignment(void)
-{
- /* XXX Largest on any MIPS */
- return 128;
-}
-
-extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr);
-
extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction);
#define TIOCPKT_START 0x08 /* start output */
#define TIOCPKT_NOSTOP 0x10 /* no more ^S, ^Q */
#define TIOCPKT_DOSTOP 0x20 /* now do ^S ^Q */
-/* #define TIOCPKT_IOCTL 0x40 state change of pty driver */
+#define TIOCPKT_IOCTL 0x40 /* state change of pty driver */
#define TIOCSWINSZ _IOW('t', 103, struct winsize) /* set window size */
#define TIOCGWINSZ _IOR('t', 104, struct winsize) /* get window size */
#define TIOCNOTTY 0x5471 /* void tty association */
#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */
/* I hope the range from 0x5480 on is free ... */
#define TIOCSCTTY 0x5480 /* become controlling tty */
#define TIOCSERSETMULTI 0x5490 /* Set multiport config */
#define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x5493 /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x5494 /* Set Hayes ESP configuration */
#endif /* __ASM_IOCTLS_H */
* Total overkill for most systems but need as a safe default.
* Set this one if any device in the system might do non-coherent DMA.
*/
-#define ARCH_KMALLOC_MINALIGN 128
+#define ARCH_DMA_MINALIGN 128
#endif
#endif /* __ASM_MACH_GENERIC_KMALLOC_H */
#define __ASM_MACH_IP27_KMALLOC_H
/*
- * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ * All happy, no need to define ARCH_DMA_MINALIGN
*/
#endif /* __ASM_MACH_IP27_KMALLOC_H */
#if defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_RM7000)
-#define ARCH_KMALLOC_MINALIGN 32
+#define ARCH_DMA_MINALIGN 32
#else
-#define ARCH_KMALLOC_MINALIGN 128
+#define ARCH_DMA_MINALIGN 128
#endif
#endif /* __ASM_MACH_IP32_KMALLOC_H */
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0x00ffffffUL)
-
#endif /* __ASM_SCATTERLIST_H */
/* Linux specials */
__kernel_fsid_t f_fsid;
long f_namelen;
- long f_spare[6];
+ long f_flags;
+ long f_spare[5];
};
#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32)
__u64 f_bavail;
__kernel_fsid_t f_fsid;
__u32 f_namelen;
- __u32 f_spare[6];
+ __u32 f_flags;
+ __u32 f_spare[5];
};
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
/* Linux specials */
__kernel_fsid_t f_fsid;
long f_namelen;
- long f_spare[6];
+ long f_flags;
+ long f_spare[5];
};
struct compat_statfs64 {
__u64 f_bavail;
__kernel_fsid_t f_fsid;
__u32 f_namelen;
- __u32 f_spare[6];
+ __u32 f_flags;
+ __u32 f_spare[5];
};
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define PENDIN 0040000 /* Retype pending input (state). */
#define TOSTOP 0100000 /* Send SIGTTOU for background output. */
#define ITOSTOP TOSTOP
+#define EXTPROC 0200000 /* External processing on pty */
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
int error;
char * filename;
- filename = getname((char __user *) (long)regs.regs[4]);
+ filename = getname((const char __user *) (long)regs.regs[4]);
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
- error = do_execve(filename, (char __user *__user *) (long)regs.regs[5],
- (char __user *__user *) (long)regs.regs[6], ®s);
+ error = do_execve(filename,
+ (const char __user *const __user *) (long)regs.regs[5],
+ (const char __user *const __user *) (long)regs.regs[6],
+ ®s);
putname(filename);
out:
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
register unsigned long __a0 asm("$4") = (unsigned long) filename;
register unsigned long __a1 asm("$5") = (unsigned long) argv;
EXPORT_SYMBOL(dma_supported);
-int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
-{
- return plat_device_is_coherent(dev);
-}
-
-EXPORT_SYMBOL(dma_is_consistent);
-
void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
{
static struct platform_nand_data pnx833x_flash_nand_data = {
.chip = {
+ .nr_chips = 1,
.chip_delay = 25,
.part_probe_types = part_probes,
},
static char *vidmem = (char *)0xb8000;
static int lines, cols;
+#define BOOTLOADER_INFLATE
#include "../../../../lib/inflate.c"
static inline void scroll(void)
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Tue Dec 22 19:26:25 2009
-#
-CONFIG_MN10300=y
-CONFIG_AM33=y
-CONFIG_MMU=y
-# CONFIG_HIGHMEM is not set
-# CONFIG_NUMA is not set
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_BUG=y
-CONFIG_QUICKLIST=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_HZ=1000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Matsushita MN10300 system setup
-#
-CONFIG_MN10300_UNIT_ASB2303=y
-# CONFIG_MN10300_UNIT_ASB2305 is not set
-CONFIG_MN10300_PROC_MN103E010=y
-CONFIG_MN10300_CPU_AM33V2=y
-CONFIG_FPU=y
-CONFIG_MN10300_CACHE_WBACK=y
-# CONFIG_MN10300_CACHE_WTHRU is not set
-# CONFIG_MN10300_CACHE_DISABLED is not set
-
-#
-# Memory layout options
-#
-CONFIG_KERNEL_RAM_BASE_ADDRESS=0x90000000
-CONFIG_INTERRUPT_VECTOR_BASE=0x90000000
-CONFIG_KERNEL_TEXT_ADDRESS=0x90001000
-CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000
CONFIG_PREEMPT=y
-CONFIG_MN10300_CURRENT_IN_E2=y
-CONFIG_MN10300_USING_JTAG=y
CONFIG_MN10300_RTC=y
-CONFIG_MN10300_WD_TIMER=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# MN10300 internal serial options
-#
-CONFIG_MN10300_PROC_HAS_TTYSM0=y
-CONFIG_MN10300_PROC_HAS_TTYSM1=y
-CONFIG_MN10300_PROC_HAS_TTYSM2=y
-CONFIG_MN10300_TTYSM=y
CONFIG_MN10300_TTYSM_CONSOLE=y
CONFIG_MN10300_TTYSM0=y
-CONFIG_MN10300_TTYSM0_TIMER8=y
-# CONFIG_MN10300_TTYSM0_TIMER2 is not set
CONFIG_MN10300_TTYSM1=y
-CONFIG_MN10300_TTYSM1_TIMER9=y
-# CONFIG_MN10300_TTYSM1_TIMER3 is not set
-# CONFIG_MN10300_TTYSM2 is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Executable formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
#define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES
#endif
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
/* data cache purge registers
* - read from the register to unconditionally purge that cache line
return 0;
}
-static inline
-int dma_get_cache_alignment(void)
-{
- return 1 << L1_CACHE_SHIFT;
-}
-
-#define dma_is_consistent(d) (1)
-
static inline
void dma_cache_sync(void *vaddr, size_t size,
enum dma_data_direction direction)
#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY
#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
#else
-#define gdbstub_entry(FMT, ...) ({ 0; })
+#define gdbstub_entry(FMT, ...) no_printk(FMT, ##__VA_ARGS__)
#endif
#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL
#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
#else
-#define gdbstub_proto(FMT, ...) ({ 0; })
+#define gdbstub_proto(FMT, ...) no_printk(FMT, ##__VA_ARGS__)
#endif
#ifdef CONFIG_GDBSTUB_DEBUG_IO
#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
#else
-#define gdbstub_io(FMT, ...) ({ 0; })
+#define gdbstub_io(FMT, ...) no_printk(FMT, ##__VA_ARGS__)
#endif
#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT
#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
#else
-#define gdbstub_bkpt(FMT, ...) ({ 0; })
+#define gdbstub_bkpt(FMT, ...) no_printk(FMT, ##__VA_ARGS__)
#endif
#endif /* !__ASSEMBLY__ */
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number
* (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
typedef unsigned short __kernel_ipc_pid_t;
typedef unsigned short __kernel_uid_t;
typedef unsigned short __kernel_gid_t;
+#if __GNUC__ == 4
+typedef unsigned int __kernel_size_t;
+typedef signed int __kernel_ssize_t;
+#else
typedef unsigned long __kernel_size_t;
-typedef long __kernel_ssize_t;
+typedef signed long __kernel_ssize_t;
+#endif
typedef int __kernel_ptrdiff_t;
typedef long __kernel_time_t;
typedef long __kernel_suseconds_t;
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
#endif /* _ASM_SCATTERLIST_H */
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
#include <unit/timex.h>
#include "mn10300-serial.h"
-static inline __attribute__((format(printf, 1, 2)))
-void no_printk(const char *fmt, ...)
-{
-}
-
#define kenter(FMT, ...) \
printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__)
#define _enter(FMT, ...) \
0, NULL, NULL);
}
-asmlinkage long sys_execve(char __user *name,
- char __user * __user *argv,
- char __user * __user *envp)
+asmlinkage long sys_execve(const char __user *name,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp)
{
char *filename;
int error;
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
-/* last time the RTC got updated */
-static long last_rtc_update;
-
/* time for RTC to update itself in ioclks */
static unsigned long mn10300_rtc_update_period;
int update_persistent_clock(struct timespec now)
{
- return set_rtc_mms(now.tv_sec);
+ return set_rtc_mmss(now.tv_sec);
}
/*
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 01:32:55 2009
-#
-CONFIG_PARISC=y
-CONFIG_MMU=y
-CONFIG_STACK_GROWSUP=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_INIT_ALL_POSSIBLE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_PA7000 is not set
CONFIG_PA7100LC=y
-# CONFIG_PA7200 is not set
-# CONFIG_PA7300LC is not set
-# CONFIG_PA8X00 is not set
-CONFIG_PA11=y
-CONFIG_PARISC_PAGE_SIZE_4KB=y
-# CONFIG_PARISC_PAGE_SIZE_16KB is not set
-# CONFIG_PARISC_PAGE_SIZE_64KB is not set
-# CONFIG_SMP is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_HPUX is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
-#
-CONFIG_GSC=y
-# CONFIG_HPPB is not set
-# CONFIG_IOMMU_CCIO is not set
CONFIG_GSC_LASI=y
-# CONFIG_GSC_WAX is not set
-# CONFIG_EISA is not set
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# PA-RISC specific drivers
-#
-CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
-CONFIG_PDC_CHASSIS_WARN=y
-CONFIG_PDC_STABLE=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_BLK_DEV=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_LASI700=y
-CONFIG_53C700_LE_ON_BE=y
-# CONFIG_SCSI_ZALON is not set
CONFIG_SCSI_DEBUG=m
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_NET_POCKET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
-# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
-CONFIG_KEYBOARD_HIL=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_HIL=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_GSC=y
CONFIG_SERIAL_8250_NR_UARTS=17
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
# CONFIG_SERIAL_MUX is not set
CONFIG_PDC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_STI=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_PARISC_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-CONFIG_SND_GSC=y
CONFIG_SND_HARMONY=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_PARISC=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_RODATA=y
-
-#
-# Security options
-#
-CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 01:32:56 2009
-#
-CONFIG_PARISC=y
-CONFIG_MMU=y
-CONFIG_STACK_GROWSUP=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_TIME_LOW_RES=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_INIT_ALL_POSSIBLE=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_PA7000 is not set
-# CONFIG_PA7100LC is not set
-# CONFIG_PA7200 is not set
-# CONFIG_PA7300LC is not set
CONFIG_PA8X00=y
-CONFIG_PA20=y
-CONFIG_PREFETCH=y
CONFIG_64BIT=y
-CONFIG_PARISC_PAGE_SIZE_4KB=y
-# CONFIG_PARISC_PAGE_SIZE_16KB is not set
-# CONFIG_PARISC_PAGE_SIZE_64KB is not set
CONFIG_SMP=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_NODES_SHIFT=3
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_COMPAT=y
CONFIG_NR_CPUS=8
-
-#
-# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
-#
# CONFIG_GSC is not set
CONFIG_PCI=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
CONFIG_PCI_LBA=y
-CONFIG_IOSAPIC=y
-CONFIG_IOMMU_SBA=y
-CONFIG_IOMMU_HELPER=y
CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
# CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
-CONFIG_PCCARD_NONSTATIC=m
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# PA-RISC specific drivers
-#
# CONFIG_SUPERIO is not set
# CONFIG_CHASSIS_LCD_LED is not set
-CONFIG_PDC_CHASSIS=y
-CONFIG_PDC_CHASSIS_WARN=y
-CONFIG_PDC_STABLE=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
-# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
-# CONFIG_FUSION_SAS is not set
-CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
CONFIG_E100=m
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=17
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_PDC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
CONFIG_AGP=y
CONFIG_AGP_PARISC=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DUMMY_CONSOLE_COLUMNS=160
-CONFIG_DUMMY_CONSOLE_ROWS=64
# CONFIG_STI_CONSOLE is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_PARISC=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_BUILD_DOCSRC is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_RODATA is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 01:32:57 2009
-#
-CONFIG_PARISC=y
-CONFIG_MMU=y
-CONFIG_STACK_GROWSUP=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_INIT_ALL_POSSIBLE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_PA7000 is not set
CONFIG_PA7100LC=y
-# CONFIG_PA7200 is not set
-# CONFIG_PA7300LC is not set
-# CONFIG_PA8X00 is not set
-CONFIG_PA11=y
-CONFIG_PARISC_PAGE_SIZE_4KB=y
-# CONFIG_PARISC_PAGE_SIZE_16KB is not set
-# CONFIG_PARISC_PAGE_SIZE_64KB is not set
-# CONFIG_SMP is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_HPUX is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
-#
-CONFIG_GSC=y
CONFIG_HPPB=y
CONFIG_IOMMU_CCIO=y
CONFIG_GSC_LASI=y
CONFIG_GSC_WAX=y
CONFIG_EISA=y
-CONFIG_EISA_NAMES=y
CONFIG_ISA=y
CONFIG_PCI=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
CONFIG_GSC_DINO=y
-# CONFIG_PCI_LBA is not set
-CONFIG_IOMMU_HELPER=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# PA-RISC specific drivers
-#
-CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
-CONFIG_PDC_CHASSIS_WARN=y
-CONFIG_PDC_STABLE=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
-# CONFIG_PARPORT_SERIAL is not set
-CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_ATA_OVER_ETH=y
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1740 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_LASI700=y
-CONFIG_53C700_LE_ON_BE=y
-# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_ZALON=y
-CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
-CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=40
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SIM710 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
-#
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_LASI_82596=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NET_FC is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
-# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
-CONFIG_KEYBOARD_HIL=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_HIL=y
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_HP_SDC_RTC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_GSC=y
-CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=13
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MUX=y
-CONFIG_SERIAL_MUX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_STI=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DUMMY_CONSOLE_COLUMNS=160
-CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_STI_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_PARISC_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_GSC=y
CONFIG_SND_HARMONY=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_PARISC=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_BUILD_DOCSRC is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_RODATA is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_PCBC is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 01:32:58 2009
-#
-CONFIG_PARISC=y
-CONFIG_MMU=y
-CONFIG_STACK_GROWSUP=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_INIT_ALL_POSSIBLE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_PA7000 is not set
-# CONFIG_PA7100LC is not set
-# CONFIG_PA7200 is not set
-# CONFIG_PA7300LC is not set
CONFIG_PA8X00=y
-CONFIG_PA20=y
-CONFIG_PREFETCH=y
-# CONFIG_64BIT is not set
-CONFIG_PARISC_PAGE_SIZE_4KB=y
-# CONFIG_PARISC_PAGE_SIZE_16KB is not set
-# CONFIG_PARISC_PAGE_SIZE_64KB is not set
-# CONFIG_SMP is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_HPUX is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
-#
# CONFIG_GSC is not set
CONFIG_PCI=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
CONFIG_PCI_LBA=y
-CONFIG_IOSAPIC=y
-CONFIG_IOMMU_SBA=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# PA-RISC specific drivers
-#
-CONFIG_SUPERIO=y
-CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
-CONFIG_PDC_CHASSIS_WARN=y
-CONFIG_PDC_STABLE=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=m
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
CONFIG_E100=m
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=13
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_PDC_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_STI=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DUMMY_CONSOLE_COLUMNS=160
-CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_STI_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_PARISC_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_PARISC=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_BUILD_DOCSRC is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_RODATA=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 01:32:59 2009
-#
-CONFIG_PARISC=y
-CONFIG_MMU=y
-CONFIG_STACK_GROWSUP=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_INIT_ALL_POSSIBLE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_PA7000 is not set
CONFIG_PA7100LC=y
-# CONFIG_PA7200 is not set
-# CONFIG_PA7300LC is not set
-# CONFIG_PA8X00 is not set
-CONFIG_PA11=y
-CONFIG_PARISC_PAGE_SIZE_4KB=y
-# CONFIG_PARISC_PAGE_SIZE_16KB is not set
-# CONFIG_PARISC_PAGE_SIZE_64KB is not set
-# CONFIG_SMP is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_HPUX is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
-#
-CONFIG_GSC=y
-# CONFIG_HPPB is not set
CONFIG_IOMMU_CCIO=y
CONFIG_GSC_LASI=y
CONFIG_GSC_WAX=y
CONFIG_EISA=y
-CONFIG_EISA_NAMES=y
-# CONFIG_ISA is not set
CONFIG_PCI=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
-CONFIG_IOSAPIC=y
-CONFIG_IOMMU_SBA=y
-CONFIG_IOMMU_HELPER=y
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
-CONFIG_PCCARD_NONSTATIC=y
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# PA-RISC specific drivers
-#
-CONFIG_SUPERIO=y
-CONFIG_CHASSIS_LCD_LED=y
-CONFIG_PDC_CHASSIS=y
-CONFIG_PDC_CHASSIS_WARN=y
-CONFIG_PDC_STABLE=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
-CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_BLK_DEV=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA1740 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_LASI700=y
-CONFIG_53C700_LE_ON_BE=y
-# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_ZALON=y
-CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
-CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
-CONFIG_SCSI_NCR53C8XX_SYNC=20
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SIM710 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
-# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
-CONFIG_KEYBOARD_HIL=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_HIL=y
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_GSC=y
-CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=17
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MUX=y
-CONFIG_SERIAL_MUX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_STI=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_PARISC_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-CONFIG_SND_GSC=y
CONFIG_SND_HARMONY=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
CONFIG_HID_TOPSEED=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_PARISC=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_BUILD_DOCSRC is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_RODATA is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
int error;
char *filename;
- filename = getname((char __user *) regs->gr[26]);
+ filename = getname((const char __user *) regs->gr[26]);
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
- error = do_execve(filename, (char __user * __user *) regs->gr[25],
- (char __user * __user *) regs->gr[24], regs);
+ error = do_execve(filename,
+ (const char __user *const __user *) regs->gr[25],
+ (const char __user *const __user *) regs->gr[24],
+ regs);
putname(filename);
return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
}
-long hpux_stat64(char __user *filename, struct hpux_stat64 __user *statbuf)
+long hpux_stat64(const char __user *filename, struct hpux_stat64 __user *statbuf)
{
struct kstat stat;
int error = vfs_stat(filename, &stat);
return error;
}
-long hpux_lstat64(char __user *filename, struct hpux_stat64 __user *statbuf)
+long hpux_lstat64(const char __user *filename,
+ struct hpux_stat64 __user *statbuf)
{
struct kstat stat;
int error = vfs_lstat(filename, &stat);
s = user_get_super(dev);
if (s == NULL)
goto out;
- err = vfs_statfs(s->s_root, &sbuf);
+ err = statfs_by_dentry(s->s_root, &sbuf);
drop_super(s);
if (err)
goto out;
int16_t f_pad;
};
-static int vfs_statfs_hpux(struct dentry *dentry, struct hpux_statfs *buf)
+static int do_statfs_hpux(struct path *path, struct hpux_statfs *buf)
{
struct kstatfs st;
int retval;
- retval = vfs_statfs(dentry, &st);
+ retval = vfs_statfs(path, &st);
if (retval)
return retval;
error = user_path(pathname, &path);
if (!error) {
struct hpux_statfs tmp;
- error = vfs_statfs_hpux(path.dentry, &tmp);
+ error = do_statfs_hpux(&path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
path_put(&path);
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs_hpux(file->f_path.dentry, &tmp);
+ error = do_statfs_hpux(&file->f_path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
fput(file);
include include/asm-generic/Kbuild.asm
-unifdef-y += pdc.h
+header-y += pdc.h
#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
+
#define __read_mostly __attribute__((__section__(".data..read_mostly")))
void parisc_cache_init(void); /* initializes cache-flushing */
return 0;
}
-static inline int
-dma_get_cache_alignment(void)
-{
- return dcache_stride;
-}
-
-static inline int
-dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
-{
- return (hppa_dma_ops->dma_sync_single_for_cpu == NULL);
-}
-
static inline void
dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460 /* Get exact space used by quota */
#define TIOCSTART 0x5461
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm/types.h>
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (~0UL)
#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg))
#endif /* _ASM_PARISC_SCATTERLIST_H */
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
- error = do_execve(filename, (char __user * __user *) regs->gr[25],
- (char __user * __user *) regs->gr[24], regs);
+ error = do_execve(filename,
+ (const char __user *const __user *) regs->gr[25],
+ (const char __user *const __user *) regs->gr[24],
+ regs);
putname(filename);
out:
return error;
}
-extern int __execve(const char *filename, char *const argv[],
- char *const envp[], struct task_struct *task);
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+extern int __execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[], struct task_struct *task);
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
return __execve(filename, argv, envp, current);
}
*/
offset = phys_addr & ~PAGE_MASK;
phys_addr &= PAGE_MASK;
- size = PAGE_ALIGN(last_addr) - phys_addr;
+ size = PAGE_ALIGN(last_addr + 1) - phys_addr;
/*
* Ok, go for it..
reg = <0x114000 0x1000>;
interrupts = <48 2>;
interrupt-parent = <&mpic>;
+ voltage-ranges = <3300 3300>;
+ sdhci,auto-cmd12;
};
i2c@118000 {
include include/asm-generic/Kbuild.asm
header-y += auxvec.h
-header-y += ioctls.h
-header-y += sembuf.h
-header-y += siginfo.h
-header-y += stat.h
+header-y += bootx.h
+header-y += byteorder.h
+header-y += cputable.h
+header-y += elf.h
header-y += errno.h
-header-y += ipcbuf.h
-header-y += msgbuf.h
-header-y += shmbuf.h
-header-y += socket.h
-header-y += termbits.h
header-y += fcntl.h
-header-y += poll.h
-header-y += sockios.h
-header-y += ucontext.h
header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
header-y += linkage.h
+header-y += msgbuf.h
+header-y += nvram.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ps3fb.h
header-y += resource.h
+header-y += seccomp.h
+header-y += sembuf.h
+header-y += shmbuf.h
header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += spu_info.h
+header-y += stat.h
header-y += statfs.h
-header-y += ps3fb.h
-
-unifdef-y += bootx.h
-unifdef-y += byteorder.h
-unifdef-y += cputable.h
-unifdef-y += elf.h
-unifdef-y += nvram.h
-unifdef-y += param.h
-unifdef-y += posix_types.h
-unifdef-y += seccomp.h
-unifdef-y += signal.h
-unifdef-y += spu_info.h
-unifdef-y += termios.h
-unifdef-y += types.h
-unifdef-y += unistd.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += ucontext.h
+header-y += unistd.h
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define dma_is_consistent(d, h) (0)
-#else
-#define dma_is_consistent(d, h) (1)
-#endif
-
-static inline int dma_get_cache_alignment(void)
-{
-#ifdef CONFIG_PPC64
- /* no easy way to get cache size on all processors, so return
- * the maximum possible, to be safe */
- return (1 << INTERNODE_CACHE_SHIFT);
-#else
- /*
- * Each processor family will define its own L1_CACHE_SHIFT,
- * L1_CACHE_BYTES wraps to this, so this is always safe.
- */
- return L1_CACHE_BYTES;
-#endif
-}
static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
+# define TIOCPKT_IOCTL 64
#define TIOCNOTTY 0x5422
#define TIOCSRS485 0x542f
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32
#ifdef CONFIG_NOT_COHERENT_CACHE
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#endif
#ifdef CONFIG_PTE_64BIT
#include <asm/dma.h>
#include <asm-generic/scatterlist.h>
-#ifdef __powerpc64__
-#define ISA_DMA_THRESHOLD (~0UL)
-#endif
#define ARCH_HAS_SG_CHAIN
#endif /* _ASM_POWERPC_SCATTERLIST_H */
#define FLUSHO 0x00800000
#define PENDIN 0x20000000
#define IEXTEN 0x00000400
+#define EXTPROC 0x10000000
/* Values for the ACTION argument to `tcflow'. */
#define TCOOFF 0
int error;
char *filename;
- filename = getname((char __user *) a0);
+ filename = getname((const char __user *) a0);
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
flush_fp_to_thread(current);
flush_altivec_to_thread(current);
flush_spe_to_thread(current);
- error = do_execve(filename, (char __user * __user *) a1,
- (char __user * __user *) a2, regs);
+ error = do_execve(filename,
+ (const char __user *const __user *) a1,
+ (const char __user *const __user *) a2, regs);
putname(filename);
out:
return error;
return sys_pread64(fd, ubuf, count, ((loff_t)poshi << 32) | poslo);
}
-compat_ssize_t compat_sys_pwrite64(unsigned int fd, char __user *ubuf, compat_size_t count,
+compat_ssize_t compat_sys_pwrite64(unsigned int fd, const char __user *ubuf, compat_size_t count,
u32 reg6, u32 poshi, u32 poslo)
{
return sys_pwrite64(fd, ubuf, count, ((loff_t)poshi << 32) | poslo);
static int __init mpc837x_declare_of_platform_devices(void)
{
- /* Publish of_device */
+ /* Publish platform_device */
of_platform_bus_probe(NULL, mpc837x_ids, NULL);
return 0;
static int __init mpc837x_declare_of_platform_devices(void)
{
- /* Publish of_device */
+ /* Publish platform_device */
of_platform_bus_probe(NULL, mpc837x_ids, NULL);
return 0;
if ((attr->ia_valid & ATTR_SIZE) &&
(attr->ia_size != inode->i_size))
return -EINVAL;
- return inode_setattr(inode, attr);
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
}
static void
-spufs_delete_inode(struct inode *inode)
+spufs_evict_inode(struct inode *inode)
{
struct spufs_inode_info *ei = SPUFS_I(inode);
-
+ end_writeback(inode);
if (ei->i_ctx)
put_spu_context(ei->i_ctx);
if (ei->i_gang)
put_spu_gang(ei->i_gang);
- clear_inode(inode);
}
static void spufs_prune_dir(struct dentry *dir)
.alloc_inode = spufs_alloc_inode,
.destroy_inode = spufs_destroy_inode,
.statfs = simple_statfs,
- .delete_inode = spufs_delete_inode,
- .drop_inode = generic_delete_inode,
+ .evict_inode = spufs_evict_inode,
.show_options = generic_show_options,
};
/**
* fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
- * @dev: of_device pointer
+ * @dev: platform_device pointer
*
* Initializes MPC85xx RapidIO hardware interface, configures
* master port with system-specific info, and registers the
rcu_read_lock();
for_each_netdev_rcu(&init_net, dev) {
+ const struct rtnl_link_stats64 *stats;
struct rtnl_link_stats64 temp;
- const struct net_device_stats *stats = dev_get_stats(dev, &temp);
+ stats = dev_get_stats(dev, &temp);
rx_packets += stats->rx_packets;
tx_packets += stats->tx_packets;
rx_bytes += stats->rx_bytes;
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.35-rc1
-# Fri Jun 4 11:32:40 2010
-#
-CONFIG_SCHED_MC=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_NO_IOMEM=y
-CONFIG_NO_DMA=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_PGSTE=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_S390=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-# CONFIG_CPUSETS is not set
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_BLK_CGROUP is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_SYSCALL_WRAPPERS=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_INIT_ALL_POSSIBLE=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_LOCK=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_READ_TRYLOCK=y
-CONFIG_ARCH_INLINE_READ_LOCK=y
-CONFIG_ARCH_INLINE_READ_LOCK_BH=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_READ_UNLOCK=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_WRITE_TRYLOCK=y
-CONFIG_ARCH_INLINE_WRITE_LOCK=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Base setup
-#
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_64BIT=y
-# CONFIG_KTIME_SCALAR is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=32
-CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_AUDIT_ARCH=y
CONFIG_S390_EXEC_PROTECT=y
-
-#
-# Code generation options
-#
-# CONFIG_MARCH_G5 is not set
-CONFIG_MARCH_Z900=y
-# CONFIG_MARCH_Z990 is not set
-# CONFIG_MARCH_Z9_109 is not set
-# CONFIG_MARCH_Z10 is not set
CONFIG_PACK_STACK=y
-# CONFIG_SMALL_STACK is not set
CONFIG_CHECK_STACK=y
-CONFIG_STACK_GUARD=256
-# CONFIG_WARN_STACK is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-
-#
-# Kernel preemption
-#
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# I/O subsystem configuration
-#
CONFIG_QDIO=y
CONFIG_CHSC_SCH=m
-
-#
-# Misc
-#
CONFIG_IPL=y
-# CONFIG_IPL_TAPE is not set
-CONFIG_IPL_VM=y
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_PFAULT=y
-# CONFIG_SHARED_KERNEL is not set
-# CONFIG_CMM is not set
-# CONFIG_APPLDATA_BASE is not set
CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-CONFIG_S390_HYPFS_FS=y
CONFIG_KEXEC=y
-# CONFIG_ZFCPDUMP is not set
CONFIG_S390_GUEST=y
-CONFIG_SECCOMP=y
-
-#
-# Power Management
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_IUCV=y
CONFIG_AFIUCV=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_ACCT is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_NF_CONNTRACK_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_NET_SCTPPROBE is not set
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_L2TP is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_INGRESS is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
-# CONFIG_NET_CLS_CGROUP is not set
-# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
CONFIG_NET_ACT_NAT=m
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-CONFIG_RPS=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
CONFIG_CAN_VCAN=m
-# CONFIG_CAN_DEV is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-# CONFIG_CAIF is not set
-# CONFIG_PCMCIA is not set
-CONFIG_CCW=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-CONFIG_SYS_HYPERVISOR=y
-# CONFIG_CONNECTOR is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_OSD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# S/390 block device drivers
-#
CONFIG_BLK_DEV_XPRAM=m
-# CONFIG_DCSSBLK is not set
CONFIG_DASD=y
CONFIG_DASD_PROFILE=y
CONFIG_DASD_ECKD=y
CONFIG_DASD_DIAG=y
CONFIG_DASD_EER=y
CONFIG_VIRTIO_BLK=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_ZFCP=y
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
-# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_QL is not set
-# CONFIG_DM_MULTIPATH_ST is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
CONFIG_NETDEVICES=y
-# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-# CONFIG_TR is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-
-#
-# S/390 network device drivers
-#
CONFIG_LCS=m
CONFIG_CTCM=m
-# CONFIG_NETIUCV is not set
-# CONFIG_SMSGIUCV is not set
-# CONFIG_CLAW is not set
CONFIG_QETH=y
CONFIG_QETH_L2=y
CONFIG_QETH_L3=y
-CONFIG_QETH_IPV6=y
-CONFIG_CCWGROUP=y
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_VIRTIO_NET=m
-
-#
-# Character devices
-#
-CONFIG_DEVKMEM=y
-# CONFIG_N_GSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IUCV=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_VIRTIO=m
-# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# S/390 character device drivers
-#
CONFIG_TN3270=y
CONFIG_TN3270_TTY=y
CONFIG_TN3270_FS=m
CONFIG_TN3270_CONSOLE=y
CONFIG_TN3215=y
CONFIG_TN3215_CONSOLE=y
-CONFIG_CCW_CONSOLE=y
CONFIG_SCLP_TTY=y
CONFIG_SCLP_CONSOLE=y
CONFIG_SCLP_VT220_TTY=y
CONFIG_SCLP_CPI=m
CONFIG_SCLP_ASYNC=m
CONFIG_S390_TAPE=m
-
-#
-# S/390 tape interface support
-#
CONFIG_S390_TAPE_BLOCK=y
-
-#
-# S/390 tape hardware support
-#
CONFIG_S390_TAPE_34XX=m
-# CONFIG_S390_TAPE_3590 is not set
-# CONFIG_VMLOGRDR is not set
-# CONFIG_VMCP is not set
-# CONFIG_MONREADER is not set
-CONFIG_MONWRITER=m
-CONFIG_S390_VMUR=m
-# CONFIG_RAMOOPS is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_EXOFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
CONFIG_IBM_PARTITION=y
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
-# CONFIG_LKDTM is not set
-# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_KPROBE_EVENT=y
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_SAMPLES=y
-# CONFIG_SAMPLE_TRACEPOINTS is not set
-# CONFIG_SAMPLE_TRACE_EVENTS is not set
-# CONFIG_SAMPLE_KOBJECT is not set
-# CONFIG_SAMPLE_KPROBES is not set
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_GHASH=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=m
-# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
CONFIG_ZCRYPT=m
-# CONFIG_ZCRYPT_MONOLITHIC is not set
-# CONFIG_CRYPTO_SHA1_S390 is not set
-# CONFIG_CRYPTO_SHA256_S390 is not set
CONFIG_CRYPTO_SHA512_S390=m
-# CONFIG_CRYPTO_DES_S390 is not set
-# CONFIG_CRYPTO_AES_S390 is not set
-CONFIG_S390_PRNG=m
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=m
CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_NLATTR=y
-CONFIG_HAVE_KVM=y
-CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
-# CONFIG_VHOST_NET is not set
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_BALLOON=m
return ret;
}
-static void hypfs_drop_inode(struct inode *inode)
+static void hypfs_evict_inode(struct inode *inode)
{
+ end_writeback(inode);
kfree(inode->i_private);
- generic_delete_inode(inode);
}
static int hypfs_open(struct inode *inode, struct file *filp)
static const struct super_operations hypfs_s_ops = {
.statfs = simple_statfs,
- .drop_inode = hypfs_drop_inode,
+ .evict_inode = hypfs_evict_inode,
.show_options = hypfs_show_options,
};
include include/asm-generic/Kbuild.asm
+header-y += chpid.h
+header-y += chsc.h
+header-y += cmb.h
header-y += dasd.h
+header-y += debug.h
header-y += monwriter.h
header-y += qeth.h
+header-y += schid.h
header-y += tape390.h
header-y += ucontext.h
header-y += vtoc.h
header-y += zcrypt.h
-header-y += chsc.h
-
-unifdef-y += cmb.h
-unifdef-y += debug.h
-unifdef-y += chpid.h
-unifdef-y += schid.h
extern struct ccw_device *ccw_device_probe_console(void);
extern int ccw_device_force_console(void);
+int ccw_device_siosl(struct ccw_device *);
+
// FIXME: these have to go
extern int _ccw_device_get_subchannel_number(struct ccw_device *);
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-#define ISA_DMA_THRESHOLD (~0UL)
-
#include <asm-generic/scatterlist.h>
__kernel_fsid_t f_fsid;
int f_namelen;
int f_frsize;
- int f_spare[5];
+ int f_flags;
+ int f_spare[4];
};
struct statfs64 {
__kernel_fsid_t f_fsid;
int f_namelen;
int f_frsize;
- int f_spare[5];
+ int f_flags;
+ int f_spare[4];
};
struct compat_statfs64 {
__kernel_fsid_t f_fsid;
__u32 f_namelen;
__u32 f_frsize;
- __u32 f_spare[5];
+ __u32 f_flags;
+ __u32 f_spare[4];
};
#endif /* __s390x__ */
};
#endif
-#define SD_MC_INIT SD_CPU_INIT
-
#include <asm-generic/topology.h>
#endif /* _ASM_S390_TOPOLOGY_H */
#define __NR_pwritev 329
#define __NR_rt_tgsigqueueinfo 330
#define __NR_perf_event_open 331
-#define NR_syscalls 332
+#define __NR_fanotify_init 332
+#define __NR_fanotify_mark 333
+#define __NR_prlimit64 334
+#define NR_syscalls 335
/*
* There are some system calls that are not present on 64 bit, some
* sys32_execve() executes a new program after the asm stub has set
* things up for us. This should basically do what I want it to.
*/
-asmlinkage long sys32_execve(char __user *name, compat_uptr_t __user *argv,
+asmlinkage long sys32_execve(const char __user *name, compat_uptr_t __user *argv,
compat_uptr_t __user *envp)
{
struct pt_regs *regs = task_pt_regs(current);
return copy_to_user(ubuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
}
-asmlinkage long sys32_stat64(char __user * filename, struct stat64_emu31 __user * statbuf)
+asmlinkage long sys32_stat64(const char __user * filename, struct stat64_emu31 __user * statbuf)
{
struct kstat stat;
int ret = vfs_stat(filename, &stat);
return ret;
}
-asmlinkage long sys32_lstat64(char __user * filename, struct stat64_emu31 __user * statbuf)
+asmlinkage long sys32_lstat64(const char __user * filename, struct stat64_emu31 __user * statbuf)
{
struct kstat stat;
int ret = vfs_lstat(filename, &stat);
return ret;
}
-asmlinkage long sys32_fstatat64(unsigned int dfd, char __user *filename,
+asmlinkage long sys32_fstatat64(unsigned int dfd, const char __user *filename,
struct stat64_emu31 __user* statbuf, int flag)
{
struct kstat stat;
return sys_read(fd, buf, count);
}
-asmlinkage long sys32_write(unsigned int fd, char __user * buf, size_t count)
+asmlinkage long sys32_write(unsigned int fd, const char __user * buf, size_t count)
{
if ((compat_ssize_t) count < 0)
return -EINVAL;
compat_sigset_t __user *oset, size_t sigsetsize);
long sys32_rt_sigpending(compat_sigset_t __user *set, size_t sigsetsize);
long sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo);
-long sys32_execve(char __user *name, compat_uptr_t __user *argv,
+long sys32_execve(const char __user *name, compat_uptr_t __user *argv,
compat_uptr_t __user *envp);
long sys32_init_module(void __user *umod, unsigned long len,
const char __user *uargs);
size_t count);
long sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *offset,
s32 count);
-long sys32_stat64(char __user * filename, struct stat64_emu31 __user * statbuf);
-long sys32_lstat64(char __user * filename,
+long sys32_stat64(const char __user * filename, struct stat64_emu31 __user * statbuf);
+long sys32_lstat64(const char __user * filename,
struct stat64_emu31 __user * statbuf);
long sys32_fstat64(unsigned long fd, struct stat64_emu31 __user * statbuf);
-long sys32_fstatat64(unsigned int dfd, char __user *filename,
+long sys32_fstatat64(unsigned int dfd, const char __user *filename,
struct stat64_emu31 __user* statbuf, int flag);
unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg);
long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg);
long sys32_read(unsigned int fd, char __user * buf, size_t count);
-long sys32_write(unsigned int fd, char __user * buf, size_t count);
+long sys32_write(unsigned int fd, const char __user * buf, size_t count);
long sys32_fadvise64(int fd, loff_t offset, size_t len, int advise);
long sys32_fadvise64_64(struct fadvise64_64_args __user *args);
long sys32_sigaction(int sig, const struct old_sigaction32 __user *act,
.globl sys32_personality_wrapper
sys32_personality_wrapper:
- llgfr %r2,%r2 # unsigned long
+ llgfr %r2,%r2 # unsigned int
jg sys_s390_personality # branch to system call
.globl sys32_setfsuid16_wrapper
llgtr %r3,%r3 # compat_uptr_t *
llgtr %r4,%r4 # compat_uptr_t *
jg sys32_execve # branch to system call
+
+ .globl sys_fanotify_init_wrapper
+sys_fanotify_init_wrapper:
+ llgfr %r2,%r2 # unsigned int
+ llgfr %r3,%r3 # unsigned int
+ jg sys_fanotify_init # branch to system call
+
+ .globl sys_fanotify_mark_wrapper
+sys_fanotify_mark_wrapper:
+ lgfr %r2,%r2 # int
+ llgfr %r3,%r3 # unsigned int
+ sllg %r4,%r4,32 # get high word of 64bit mask
+ lr %r4,%r5 # get low word of 64bit mask
+ llgfr %r5,%r6 # unsigned int
+ llgt %r6,164(%r15) # char *
+ jg sys_fanotify_mark # branch to system call
+
+ .globl sys_prlimit64_wrapper
+sys_prlimit64_wrapper:
+ lgfr %r2,%r2 # pid_t
+ llgfr %r3,%r3 # unsigned int
+ llgtr %r4,%r4 # const struct rlimit64 __user *
+ llgtr %r5,%r5 # struct rlimit64 __user *
+ jg sys_prlimit64 # branch to system call
long sys_mmap2(struct s390_mmap_arg_struct __user *arg);
long sys_s390_ipc(uint call, int first, unsigned long second,
unsigned long third, void __user *ptr);
-long sys_s390_personality(unsigned long personality);
+long sys_s390_personality(unsigned int personality);
long sys_s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
size_t len, int advice);
long sys_s390_fadvise64_64(struct fadvise64_64_args __user *args);
int __user *parent_tidptr, int __user *child_tidptr);
long sys_vfork(void);
void execve_tail(void);
-long sys_execve(char __user *name, char __user * __user *argv,
+long sys_execve(const char __user *name, char __user * __user *argv,
char __user * __user *envp);
long sys_sigsuspend(int history0, int history1, old_sigset_t mask);
long sys_sigaction(int sig, const struct old_sigaction __user *act,
l %r1,.Lstartup
br %r1
-.Linitrd:.long _end + 0x400000 # default address of initrd
+.Linitrd:.long _end # default address of initrd
.Lparm: .long PARMAREA
.Lstartup: .long startup
.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
/*
* sys_execve() executes a new program.
*/
-SYSCALL_DEFINE3(execve, char __user *, name, char __user * __user *, argv,
- char __user * __user *, envp)
+SYSCALL_DEFINE3(execve, const char __user *, name,
+ const char __user *const __user *, argv,
+ const char __user *const __user *, envp)
{
struct pt_regs *regs = task_pt_regs(current);
char *filename;
}
#ifdef CONFIG_64BIT
-SYSCALL_DEFINE1(s390_personality, unsigned long, personality)
+SYSCALL_DEFINE1(s390_personality, unsigned int, personality)
{
- int ret;
+ unsigned int ret;
if (current->personality == PER_LINUX32 && personality == PER_LINUX)
personality = PER_LINUX32;
SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */
SYSCALL(sys_perf_event_open,sys_perf_event_open,sys_perf_event_open_wrapper)
+SYSCALL(sys_fanotify_init,sys_fanotify_init,sys_fanotify_init_wrapper)
+SYSCALL(sys_fanotify_mark,sys_fanotify_mark,sys_fanotify_mark_wrapper)
+SYSCALL(sys_prlimit64,sys_prlimit64,sys_prlimit64_wrapper)
.notifier_call = cmm_power_event,
};
-static int cmm_init(void)
+static int __init cmm_init(void)
{
int rc = -ENOMEM;
if (!cmm_sysctl_header)
goto out_sysctl;
#ifdef CONFIG_CMM_IUCV
+ /* convert sender to uppercase characters */
+ if (sender) {
+ int len = strlen(sender);
+ while (len--)
+ sender[len] = toupper(sender[len]);
+ }
+
rc = smsg_register_callback(SMSG_PREFIX, cmm_smsg_target);
if (rc < 0)
goto out_smsg;
}
module_init(cmm_init);
-static void cmm_exit(void)
+static void __exit cmm_exit(void)
{
unregister_sysctl_table(cmm_sysctl_header);
#ifdef CONFIG_CMM_IUCV
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Fri Jun 12 18:57:07 2009
-#
-
-#
-# Machine selection
-#
-# CONFIG_ARCH_SCORE7 is not set
-CONFIG_MACH_SPCT6600=y
-# CONFIG_SCORE_SIM is not set
-CONFIG_CPU_SCORE7=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_NO_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_SYSCALL_TABLE=y
-CONFIG_SCORE_L1_CACHE_SHIFT=4
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_MEMORY_START=0xa0000000
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=12
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_PROBE_INITRD_HEADER is not set
-CONFIG_MMU=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
CONFIG_STALDRV=y
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_NLATTR=y
#ifndef _ASM_SCORE_SCATTERLIST_H
#define _ASM_SCORE_SCATTERLIST_H
-#define ISA_DMA_THRESHOLD (~0UL)
-
#include <asm-generic/scatterlist.h>
#endif /* _ASM_SCORE_SCATTERLIST_H */
if (IS_ERR(filename))
return error;
- error = do_execve(filename, (char __user *__user*)regs->regs[5],
- (char __user *__user *) regs->regs[6], regs);
+ error = do_execve(filename,
+ (const char __user *const __user *)regs->regs[5],
+ (const char __user *const __user *)regs->regs[6],
+ regs);
putname(filename);
return error;
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
register unsigned long __r4 asm("r4") = (unsigned long) filename;
register unsigned long __r5 asm("r5") = (unsigned long) argv;
void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
{
- if (!vma || vma->vm_mm->context != 0) {
+ if (vma && vma->vm_mm->context != 0) {
unsigned long flags;
int oldpid, newpid, idx;
unsigned long vma_ASID = vma->vm_mm->context;
#define PORT_DRVCRA 0xA405018A
#define PORT_DRVCRB 0xA405018C
-static void ap320_wvga_power_on(void *board_data)
+static void ap320_wvga_power_on(void *board_data, struct fb_info *info)
{
msleep(100);
-obj-y := setup.o sdram.o
-obj-$(CONFIG_FB_SH_MOBILE_LCDC) += lcd_wqvga.o
+obj-y := setup.o sdram.o
+ifneq ($(CONFIG_FB_SH_MOBILE_LCDC),)
+obj-y += lcd_wqvga.o
+endif
return 0;
}
-void kfr2r09_lcd_on(void *board_data)
+void kfr2r09_lcd_on(void *board_data, struct fb_info *info)
{
kfr2r09_lcd_backlight(1);
}
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:04:35 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX2=y
-CONFIG_ARCH_SHMOBILE=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
CONFIG_CPU_SUBTYPE_SH7723=y
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
CONFIG_SH_AP325RXA=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_CLK_CPG=y
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_SH_FLCTL=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
-# CONFIG_SPI_SH_MSIOF is not set
-# CONFIG_SPI_SH_SCI is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-CONFIG_IR_CORE=y
-CONFIG_VIDEO_IR=y
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_IR_I2C=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T112 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_RJ54N1 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
CONFIG_SOC_CAMERA_PLATFORM=y
CONFIG_SOC_CAMERA_OV772X=y
-# CONFIG_SOC_CAMERA_OV9640 is not set
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_SH_MOBILE_LCDC=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_SUPERH_MONO=y
-CONFIG_LOGO_SUPERH_VGA16=y
-CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SH is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 18:01:02 2010
-#
-CONFIG_SUPERH=y
-# CONFIG_SUPERH32 is not set
-CONFIG_SUPERH64=y
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/cayman_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH5=y
-CONFIG_CPU_SUBTYPE_SH5_101=y
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x20000000
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x80000000
CONFIG_MEMORY_SIZE=0x00400000
-CONFIG_32BIT=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_HUGETLB_PAGE_SIZE_64K=y
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-# CONFIG_CACHE_WRITEBACK is not set
-# CONFIG_CACHE_WRITETHROUGH is not set
CONFIG_CACHE_OFF=y
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH64_FPU_DENORM_FLUSH is not set
-CONFIG_SH64_ID2815_WORKAROUND=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-CONFIG_SH_CAYMAN=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=50000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00400000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_SH_MOBILE_LCDC=m
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-CONFIG_SH64_SR_WATCH=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:11:55 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
CONFIG_CPU_SUBTYPE_SH7091=y
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_HUGETLB_PAGE_SIZE_64K=y
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
CONFIG_SH_STORE_QUEUES=y
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
CONFIG_SH_DREAMCAST=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=49876504
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_SH_CPU_FREQ is not set
-
-#
-# DMA support
-#
CONFIG_SH_DMA=y
-CONFIG_SH_DMA_IRQ_MULTI=y
CONFIG_SH_DMA_API=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=4
CONFIG_NR_DMA_CHANNELS_BOOL=y
CONFIG_NR_DMA_CHANNELS=9
-# CONFIG_PVR2_DMA is not set
-# CONFIG_G2_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
-
-#
-# Bus options
-#
CONFIG_MAPLE=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
CONFIG_GDROM=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_MAPLE=y
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_MAPLE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
CONFIG_SH_WDT=y
-# CONFIG_SH_WDT_MMAP is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
CONFIG_FB_PVR2=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_SH_MOBILE_LCDC is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:14:56 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX2=y
-CONFIG_ARCH_SHMOBILE=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7724_SOLUTION_ENGINE is not set
-# CONFIG_SH_KFR2R09 is not set
CONFIG_SH_ECOVEC=y
-
-#
-# Timer and clock configuration
-#
# CONFIG_SH_TIMER_TMU is not set
-CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_CLK_CPG=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SH_ETH=y
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
# CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:17:28 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX2=y
-CONFIG_ARCH_SHMOBILE=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7724_SOLUTION_ENGINE is not set
-# CONFIG_SH_KFR2R09 is not set
CONFIG_SH_ECOVEC=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_CLK_CPG=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
-# CONFIG_IRLAN is not set
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
CONFIG_SH_SIR=y
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_MCS_FIR is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SH_ETH=y
-# CONFIG_SMC91X is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC2007=y
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_SH_MSIOF is not set
-# CONFIG_SPI_SH_SCI is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SH_MOBILE_SDHI=y
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-CONFIG_IR_CORE=y
-CONFIG_VIDEO_IR=y
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_IR_I2C=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-# CONFIG_SOC_CAMERA_MT9T031 is not set
CONFIG_SOC_CAMERA_MT9T112=y
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_RJ54N1 is not set
CONFIG_SOC_CAMERA_TW9910=y
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_SOC_CAMERA_OV9640 is not set
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_RADIO_SAA7706H is not set
-# CONFIG_RADIO_TEF6862 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_SH_MOBILE_LCDC=y
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_SEQUENCER_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_SPI is not set
-CONFIG_SND_SUPERH=y
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
-
-#
-# SoC Audio support for SuperH
-#
CONFIG_SND_SOC_SH4_FSI=y
-# CONFIG_SND_FSI_AK4642 is not set
CONFIG_SND_FSI_DA7210=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_DA7210=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-CONFIG_USB_GADGET_R8A66597=y
-CONFIG_USB_R8A66597=y
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_SPI=y
CONFIG_MMC_TMIO=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SH is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:21:52 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
-CONFIG_SHMEM=y
# CONFIG_AIO is not set
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
CONFIG_CPU_SUBTYPE_SH7705=y
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_SH7705_CACHE_32KB=y
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_ADC=y
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-
-#
-# Board support
-#
-# CONFIG_SH_SOLUTION_ENGINE is not set
CONFIG_SH_EDOSK7705=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=31250000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# Pseudo filesystems
-#
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:23:10 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="_edosk7760"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
CONFIG_CPU_SUBTYPE_SH7760=y
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
CONFIG_SH_STORE_QUEUES=y
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
CONFIG_SH_EDOSK7760=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
CONFIG_SH_DMA=y
-CONFIG_SH_DMA_IRQ_MULTI=y
CONFIG_SH_DMA_API=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=8
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
-# CONFIG_SH_DMABRG is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x02000000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=26000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SMC91X=y
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=3
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH7760=y
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=m
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_SH_MOBILE_LCDC=m
-# CONFIG_FB_SH7760 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SUPERH=y
CONFIG_SND_SOC=y
-
-#
-# SoC Audio support for SuperH
-#
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-CONFIG_DUMP_CODE=y
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:27:14 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
CONFIG_CPU_SUBTYPE_SH7763=y
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_SH7763RDP is not set
CONFIG_SH_ESPT=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SH_ETH=y
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=3
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_BOTH_ENDIAN=y
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_SH_MOBILE_LCDC is not set
CONFIG_FB_SH7760=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_SUPERH_MONO=y
-CONFIG_LOGO_SUPERH_VGA16=y
-CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:30:50 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
CONFIG_CPU_SUBTYPE_SH7709=y
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0d000000
CONFIG_MEMORY_SIZE=0x00400000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU_EMU is not set
-CONFIG_SH_ADC=y
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-
-#
-# Board support
-#
-# CONFIG_SH_SOLUTION_ENGINE is not set
CONFIG_SH_HP6XX=y
-# CONFIG_SH_POLARIS is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=22110000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=6
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
-
-#
-# Companion Chips
-#
-CONFIG_HD6446X_SERIES=y
-CONFIG_HD64461=y
-CONFIG_HD64461_IRQ=36
CONFIG_HD64461_ENABLER=y
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-
-#
-# PC-card bridges
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-# CONFIG_CPU_IDLE is not set
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_PCMCIA is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_HP6XX=y
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_HP600=y
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=3
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_HIT=y
CONFIG_FB_SH_MOBILE_LCDC=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_BACKLIGHT_HP680=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
CONFIG_FONT_PEARL_8x8=y
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:33:23 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX2=y
-CONFIG_ARCH_SHMOBILE=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7724_SOLUTION_ENGINE is not set
CONFIG_SH_KFR2R09=y
-# CONFIG_SH_ECOVEC is not set
-
-#
-# Timer and clock configuration
-#
# CONFIG_SH_TIMER_TMU is not set
-CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_CLK_CPG=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 quiet"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-CONFIG_USB_GADGET_R8A66597=y
-CONFIG_USB_R8A66597=y
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=y
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
# CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:35:20 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX2=y
-CONFIG_ARCH_SHMOBILE=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7724_SOLUTION_ENGINE is not set
CONFIG_SH_KFR2R09=y
-# CONFIG_SH_ECOVEC is not set
-
-#
-# Timer and clock configuration
-#
# CONFIG_SH_TIMER_TMU is not set
-CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_CLK_CPG=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_SH_MOBILE_LCDC=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
-CONFIG_LOGO_SUPERH_VGA16=y
# CONFIG_LOGO_SUPERH_CLUT224 is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-CONFIG_USB_GADGET_R8A66597=y
-CONFIG_USB_R8A66597=y
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:38:08 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_RTS7751R2D is not set
CONFIG_SH_LANDISK=y
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_LBOX_RE2 is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FONT_8x16=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=m
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=m
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=m
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=m
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=m
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
-# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:42:57 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
CONFIG_SH_LBOX_RE2=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=40000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
# CONFIG_YENTA_RICOH is not set
# CONFIG_YENTA_TI is not set
# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SH is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:44:00 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
CONFIG_CPU_SUBTYPE_SH7720=y
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0C000000
CONFIG_MEMORY_SIZE=0x03F00000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU_EMU is not set
-CONFIG_SH_DSP=y
-CONFIG_SH_ADC=y
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_DSP=y
-
-#
-# Board support
-#
CONFIG_SH_MAGIC_PANEL_R2=y
-
-#
-# Magic Panel R2 options
-#
-CONFIG_SH_MAGIC_PANEL_R2_VERSION=3
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_TIMER_CMT=y
CONFIG_SH_PCLK_FREQ=24000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=6
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=48
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-CONFIG_DUMP_CODE=y
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:48:22 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
CONFIG_CPU_SUBTYPE_SH4_202=y
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_HUGETLB_PAGE_SIZE_64K=y
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
CONFIG_SH_SH4202_MICRODEV=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=66000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=6
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
-
-#
-# Bus options
-#
CONFIG_SUPERHYWAY=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SMC91X=y
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 18:01:29 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_NUMA=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SH4AL_DSP=y
-CONFIG_CPU_SHX2=y
-CONFIG_ARCH_SHMOBILE=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
CONFIG_CPU_SUBTYPE_SH7722=y
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=1
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=2
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU_EMU is not set
-CONFIG_SH_DSP=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_DSP=y
-
-#
-# Board support
-#
-# CONFIG_SH_7722_SOLUTION_ENGINE is not set
CONFIG_SH_MIGOR=y
-CONFIG_SH_MIGOR_QVGA=y
-# CONFIG_SH_MIGOR_RTA_WVGA is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_CLK_CPG=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SMC91X=y
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=3
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-CONFIG_IR_CORE=y
-CONFIG_VIDEO_IR=y
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_IR_I2C=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T112 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_RJ54N1 is not set
CONFIG_SOC_CAMERA_TW9910=y
-# CONFIG_SOC_CAMERA_PLATFORM is not set
CONFIG_SOC_CAMERA_OV772X=y
-# CONFIG_SOC_CAMERA_OV9640 is not set
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_SH_MOBILE_LCDC=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
-CONFIG_LOGO_SUPERH_VGA16=y
# CONFIG_LOGO_SUPERH_CLUT224 is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:53:51 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
CONFIG_CPU_SUBTYPE_SH7709=y
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0C000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU_EMU=y
-CONFIG_SH_ADC=y
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_IPR_IRQ=y
-CONFIG_CPU_HAS_SR_RB=y
-
-#
-# Board support
-#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_HP6XX is not set
CONFIG_SH_POLARIS=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=33000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=6
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x00000000
CONFIG_MTD_PHYSMAP_LEN=0x01000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=3
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
-# CONFIG_PROVE_LOCKING is not set
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-CONFIG_DUMP_CODE=y
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 15:58:09 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_IO_TRAPPED=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_HUGETLB_PAGE_SIZE_64K=y
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
CONFIG_SH_STORE_QUEUES=y
CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7780_SOLUTION_ENGINE is not set
-# CONFIG_SH_SDK7780 is not set
CONFIG_SH_HIGHLANDER=y
-# CONFIG_SH_R7780RP is not set
-CONFIG_SH_R7780MP=y
-# CONFIG_SH_R7785RP is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
CONFIG_PUSH_SWITCH=y
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-CONFIG_EEPROM_93CX6=y
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_AX88796=y
CONFIG_AX88796_93CX6=y
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_HIGHLANDER=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_THERMAL=y
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-CONFIG_DUMP_CODE=y
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 16:03:27 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_NUMA=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_IO_TRAPPED=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX2=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7785=y
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=2
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
CONFIG_SH_STORE_QUEUES=y
-# CONFIG_SPECULATIVE_EXECUTION is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
CONFIG_SH_HIGHLANDER=y
-# CONFIG_SH_SH7785LCR is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_R7780MP is not set
-CONFIG_SH_R7785RP=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_CLK_CPG=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_SH_CPU_FREQ=y
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
CONFIG_PUSH_SWITCH=y
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-CONFIG_EEPROM_93CX6=y
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_AX88796=y
CONFIG_AX88796_93CX6=y
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
CONFIG_I2C_HIGHLANDER=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_SH_MOBILE_LCDC=m
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
-# CONFIG_PROVE_LOCKING is not set
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_4KSTACKS=y
-CONFIG_DUMP_CODE=y
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 16:09:18 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
-CONFIG_SYS_SUPPORTS_MTU2=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_AIO is not set
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
CONFIG_SLOB=y
-# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH2=y
-CONFIG_CPU_SH2A=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
CONFIG_CPU_SUBTYPE_SH7201=y
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_PAGE_OFFSET=0x00000000
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_29BIT=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_FPU=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
CONFIG_SH_RSK=y
-CONFIG_SH_RSK7201=y
-# CONFIG_SH_RSK7203 is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_MTU2=y
CONFIG_SH_PCLK_FREQ=40000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-CONFIG_SH_CLK_MD=0
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=8
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_FILE_LOCKING is not set
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 16:11:37 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_MTU2=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
CONFIG_SLOB=y
-# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH2=y
-CONFIG_CPU_SH2A=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
CONFIG_CPU_SUBTYPE_SH7203=y
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_PAGE_OFFSET=0x00000000
-CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_29BIT=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_FPU=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
CONFIG_SH_RSK=y
-# CONFIG_SH_RSK7201 is not set
-CONFIG_SH_RSK7203=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_TIMER_MTU2=y
CONFIG_SH_PCLK_FREQ=16670800
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-CONFIG_SH_CLK_MD=0
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_SH_CPU_FREQ=y
-
-#
-# DMA support
-#
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=4
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
-# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
-# CONFIG_DEBUG_OBJECTS_FREE is not set
-# CONFIG_DEBUG_OBJECTS_TIMERS is not set
-# CONFIG_DEBUG_OBJECTS_WORK is not set
-CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
CONFIG_DEBUG_WRITECOUNT=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DUMP_CODE=y
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 16:15:07 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_IO_TRAPPED=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
CONFIG_SH_RTS7751R2D=y
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_LBOX_RE2 is not set
-
-#
-# RTS7751R2D Board Revision
-#
-# CONFIG_RTS7751R2D_PLUS is not set
CONFIG_RTS7751R2D_1=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=60000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00010000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_SH_MSIOF is not set
CONFIG_SPI_SH_SCI=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_SH_MOBILE_LCDC=m
CONFIG_FB_SM501=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
-CONFIG_SND_SPI=y
-CONFIG_SND_SUPERH=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=m
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SH is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 16:20:00 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_IO_TRAPPED=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
CONFIG_SH_RTS7751R2D=y
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_LBOX_RE2 is not set
-
-#
-# RTS7751R2D Board Revision
-#
CONFIG_RTS7751R2D_PLUS=y
-# CONFIG_RTS7751R2D_1 is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=60000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00010000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_SH_MSIOF is not set
CONFIG_SPI_SH_SCI=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_SH_MOBILE_LCDC=m
CONFIG_FB_SM501=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
-CONFIG_SND_SPI=y
-CONFIG_SND_SUPERH=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=m
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SH is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 16:21:00 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="_SDK7780"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_HUGETLB_PAGE_SIZE_64K=y
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
CONFIG_SH_STORE_QUEUES=y
-# CONFIG_SPECULATIVE_EXECUTION is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7780_SOLUTION_ENGINE is not set
CONFIG_SH_SDK7780=y
-# CONFIG_SH_HIGHLANDER is not set
-CONFIG_SH_SDK7780_BASE=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
CONFIG_SH_DMA=y
-CONFIG_SH_DMA_IRQ_MULTI=y
CONFIG_SH_DMA_API=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=12
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x01800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_DEBUG=y
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
-CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
CONFIG_PARPORT=y
-# CONFIG_PARPORT_PC is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_BLK_DEV_PLATFORM=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
CONFIG_SSB=y
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-# CONFIG_SSB_B43_PCI_BRIDGE is not set
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-# CONFIG_SSB_PCMCIAHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_SH_MOBILE_LCDC=m
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_SUPERH_MONO=y
-CONFIG_LOGO_SUPERH_VGA16=y
-CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-CONFIG_DUMP_CODE=y
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 18:03:37 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_LOCKBREAK=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_SYS_SUPPORTS_NUMA=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_COHERENT=y
-# CONFIG_DMA_NONCOHERENT is not set
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_LZO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
CONFIG_TREE_PREEMPT_RCU=y
-# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_BLK_CGROUP=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_SLOW_WORK_DEBUG=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLK_CGROUP=y
-# CONFIG_DEBUG_BLK_CGROUP is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
-# CONFIG_DEBUG_CFQ_IOSCHED is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
CONFIG_CPU_SUBTYPE_SH7786=y
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x40000000
CONFIG_MEMORY_SIZE=0x20000000
-# CONFIG_29BIT is not set
-CONFIG_32BIT=y
CONFIG_PMB=y
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=1
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
CONFIG_HUGETLB_PAGE_SIZE_64MB=y
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
CONFIG_KSM=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_SCHED_MC=y
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
CONFIG_SH_STORE_QUEUES=y
CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEAEX=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
CONFIG_SH_SDK7786=y
-# CONFIG_SH_URQUELL is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_CLK_CPG=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_SH_CPU_FREQ=y
-
-#
-# DMA support
-#
CONFIG_SH_DMA=y
-# CONFIG_SH_DMA_API is not set
-CONFIG_NR_ONCHIP_DMA_CHANNELS=6
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_SECCOMP=y
CONFIG_SMP=y
-CONFIG_NR_CPUS=2
CONFIG_HOTPLUG_CPU=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_INTC_USERIMASK=y
CONFIG_INTC_BALANCING=y
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200 root=/dev/sda1 nmi_debug=state,debounce rootdelay=5 pmb=iomap ignore_loglevel"
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=y
-CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options (EXPERIMENTAL)
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_VERBOSE=y
-# CONFIG_HIBERNATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=y
-# CONFIG_NFTL_RW is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_SH_FLCTL=m
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=m
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_BLK_DEV_PLATFORM=y
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_SCH is not set
CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_SH_SCI_DMA=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_SH_MSIOF is not set
-# CONFIG_SPI_SH_SCI is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
CONFIG_SH_WDT=y
-# CONFIG_SH_WDT_MMAP is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_MAX6900=y
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
CONFIG_SH_DMAE=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
-# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
-# CONFIG_UIO_NETX is not set
-
-#
-# TI VLYNQ
-#
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_ECHO is not set
-# CONFIG_POCH is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Qualcomm MSM Camera And Video
-#
-
-#
-# Camera Sensor Selection
-#
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_IDE_PHISON is not set
-# CONFIG_VME_BUS is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_IIO is not set
-CONFIG_RAMZSWAP=m
-CONFIG_RAMZSWAP_STATS=y
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_STRIP is not set
-# CONFIG_DT3155 is not set
-# CONFIG_CRYSTALHD is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
-# CONFIG_BTRFS_FS_POSIX_ACL is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
-
-#
-# Caches
-#
CONFIG_FSCACHE=m
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=m
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE_NMI_ENTER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_FTRACE_NMI_ENTER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-CONFIG_KSYM_TRACER=y
-# CONFIG_PROFILE_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_DYNAMIC_FTRACE=y
-# CONFIG_FUNCTION_PROFILER is not set
-CONFIG_FTRACE_MCOUNT_RECORD=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
-CONFIG_DUMP_CODE=y
CONFIG_DWARF_UNWINDER=y
-# CONFIG_SH_NO_BSS_INIT is not set
-CONFIG_MCOUNT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_BTREE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 16:34:06 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_MTU2=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-CONFIG_TREE_RCU_TRACE=y
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
-# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
-# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
CONFIG_SLOB=y
-# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH2=y
-CONFIG_CPU_SH2A=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
CONFIG_CPU_SUBTYPE_SH7206=y
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_PAGE_OFFSET=0x00000000
-CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_SH_FPU_EMU is not set
-
-#
-# Board support
-#
-CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_7206_SOLUTION_ENGINE=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_TIMER_MTU2=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-CONFIG_SH_CLK_MD=6
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_SH_CPU_FREQ=y
-
-#
-# DMA support
-#
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
CONFIG_EEPROM_93CX6=y
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SMC91X=y
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=4
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DUMP_CODE=y
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 16:37:31 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SH4AL_DSP=y
-CONFIG_ARCH_SHMOBILE=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
CONFIG_CPU_SUBTYPE_SH7343=y
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU_EMU is not set
-CONFIG_SH_DSP=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_DSP=y
-
-#
-# Board support
-#
-CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_7343_SOLUTION_ENGINE=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_CLK_CPG=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=y
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=4
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_SH_MOBILE_LCDC=m
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_SEQUENCER_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SUPERH=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=y
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 16:41:13 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH2=y
-CONFIG_CPU_SUBTYPE_SH7619=y
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_PAGE_OFFSET=0x00000000
-CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
-
-#
-# Cache configuration
-#
-# CONFIG_CACHE_WRITEBACK is not set
-CONFIG_CACHE_WRITETHROUGH=y
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_SH_FPU_EMU is not set
-
-#
-# Board support
-#
-CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_7619_SOLUTION_ENGINE=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_PCLK_FREQ=31250000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-CONFIG_SH_CLK_MD=5
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_SOLUTIONENGINE is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=3
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
# CONFIG_SYSFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 16:42:43 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
CONFIG_CPU_SUBTYPE_SH7705=y
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_SH7705_CACHE_32KB=y
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU_EMU is not set
# CONFIG_SH_ADC is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_IPR_IRQ=y
-CONFIG_CPU_HAS_SR_RB=y
-
-#
-# Board support
-#
-CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_EDOSK7705 is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
CONFIG_STNIC=y
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 18:05:15 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
# CONFIG_BUG is not set
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
CONFIG_CPU_SUBTYPE_SH7712=y
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU_EMU is not set
# CONFIG_SH_DSP is not set
# CONFIG_SH_ADC is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_IPR_IRQ=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_DSP=y
-
-#
-# Board support
-#
-CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_SOLUTION_ENGINE=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
-# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SH_ETH=y
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-# CONFIG_DUMP_CODE is not set
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 18:06:03 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
# CONFIG_BUG is not set
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
CONFIG_CPU_SUBTYPE_SH7721=y
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU_EMU is not set
# CONFIG_SH_DSP is not set
# CONFIG_SH_ADC is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_DSP=y
-
-#
-# Board support
-#
-CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_7721_SOLUTION_ENGINE=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_TIMER_CMT=y
CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
-# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-# CONFIG_DUMP_CODE is not set
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 18:07:07 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_NUMA=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SH4AL_DSP=y
-CONFIG_CPU_SHX2=y
-CONFIG_ARCH_SHMOBILE=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
CONFIG_CPU_SUBTYPE_SH7722=y
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=1
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=2
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_HUGETLB_PAGE_SIZE_64K=y
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU_EMU is not set
-CONFIG_SH_DSP=y
CONFIG_SH_STORE_QUEUES=y
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_DSP=y
-
-#
-# Board support
-#
-CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_7722_SOLUTION_ENGINE=y
-# CONFIG_SH_MIGOR is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_CLK_CPG=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SMC91X=y
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=3
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 16:55:41 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX2=y
-CONFIG_ARCH_SHMOBILE=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_7724_SOLUTION_ENGINE=y
-# CONFIG_SH_KFR2R09 is not set
-# CONFIG_SH_ECOVEC is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_CLK_CPG=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=12
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SH_ETH=y
CONFIG_SMC91X=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_SH_MSIOF is not set
-# CONFIG_SPI_SH_SCI is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_IR_CORE=y
-CONFIG_VIDEO_IR=y
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_IR_I2C=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_AU0828 is not set
CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T112 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_RJ54N1 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
CONFIG_SOC_CAMERA_OV772X=y
-# CONFIG_SOC_CAMERA_OV9640 is not set
CONFIG_VIDEO_SH_MOBILE_CEU=y
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_TLG2300 is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_ZC0301 is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_DVB_MAX_ADAPTERS=8
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_SMS_SIANO_MDTV is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_SH_MOBILE_LCDC=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_SUPERH is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=m
-
-#
-# SoC Audio support for SuperH
-#
CONFIG_SND_SOC_SH4_FSI=m
CONFIG_SND_FSI_AK4642=y
-# CONFIG_SND_FSI_DA7210 is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
CONFIG_SND_SOC_ALL_CODECS=m
-CONFIG_SND_SOC_WM_HUBS=m
-CONFIG_SND_SOC_AD1836=m
-CONFIG_SND_SOC_AD1938=m
-CONFIG_SND_SOC_AD73311=m
-CONFIG_SND_SOC_ADS117X=m
-CONFIG_SND_SOC_AK4104=m
-CONFIG_SND_SOC_AK4535=m
-CONFIG_SND_SOC_AK4642=m
-CONFIG_SND_SOC_AK4671=m
-CONFIG_SND_SOC_CS4270=m
-CONFIG_SND_SOC_DA7210=m
-CONFIG_SND_SOC_L3=m
-CONFIG_SND_SOC_PCM3008=m
-CONFIG_SND_SOC_SPDIF=m
-CONFIG_SND_SOC_SSM2602=m
-CONFIG_SND_SOC_TLV320AIC23=m
-CONFIG_SND_SOC_TLV320AIC26=m
-CONFIG_SND_SOC_TLV320AIC3X=m
-CONFIG_SND_SOC_TLV320DAC33=m
-CONFIG_SND_SOC_UDA134X=m
-CONFIG_SND_SOC_UDA1380=m
-CONFIG_SND_SOC_WM8510=m
-CONFIG_SND_SOC_WM8523=m
-CONFIG_SND_SOC_WM8580=m
-CONFIG_SND_SOC_WM8711=m
-CONFIG_SND_SOC_WM8727=m
-CONFIG_SND_SOC_WM8728=m
-CONFIG_SND_SOC_WM8731=m
-CONFIG_SND_SOC_WM8750=m
-CONFIG_SND_SOC_WM8753=m
-CONFIG_SND_SOC_WM8776=m
-CONFIG_SND_SOC_WM8900=m
-CONFIG_SND_SOC_WM8903=m
-CONFIG_SND_SOC_WM8904=m
-CONFIG_SND_SOC_WM8940=m
-CONFIG_SND_SOC_WM8955=m
-CONFIG_SND_SOC_WM8960=m
-CONFIG_SND_SOC_WM8961=m
-CONFIG_SND_SOC_WM8971=m
-CONFIG_SND_SOC_WM8974=m
-CONFIG_SND_SOC_WM8978=m
-CONFIG_SND_SOC_WM8988=m
-CONFIG_SND_SOC_WM8990=m
-CONFIG_SND_SOC_WM8993=m
-CONFIG_SND_SOC_WM9081=m
-CONFIG_SND_SOC_MAX9877=m
-CONFIG_SND_SOC_TPA6130A2=m
-CONFIG_SND_SOC_WM2000=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-CONFIG_USB_GADGET_R8A66597=y
-CONFIG_USB_R8A66597=y
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SH is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:00:16 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
CONFIG_CPU_SUBTYPE_SH7750=y
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_IPR_IRQ=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_SOLUTION_ENGINE=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
CONFIG_STNIC=y
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_SH_WDT=y
-# CONFIG_SH_WDT_MMAP is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:03:26 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
CONFIG_CPU_SUBTYPE_SH7751=y
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_IPR_IRQ=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_7751_SOLUTION_ENGINE=y
-# CONFIG_SH_SH03 is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=60000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00010000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,38400"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=y
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SH_WDT is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:06:12 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_7780_SOLUTION_ENGINE=y
-# CONFIG_SH_SDK7780 is not set
-# CONFIG_SH_HIGHLANDER is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00810000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
CONFIG_THERMAL=y
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_SH_MOBILE_LCDC=m
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_PCBC is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:10:00 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
CONFIG_CPU_SUBTYPE_SH7751=y
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_IPR_IRQ=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
CONFIG_SH_SH03=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=60000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00004000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=m
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
CONFIG_SH_WDT=m
-# CONFIG_SH_WDT_MMAP is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:14:59 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
CONFIG_CPU_SUBTYPE_SH7710=y
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x00800000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU_EMU is not set
-CONFIG_SH_DSP=y
# CONFIG_SH_ADC is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_DSP=y
-
-#
-# Board support
-#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=32768000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=y
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=y
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_SH_ETH is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
CONFIG_PHONE=y
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:17:36 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-# CONFIG_CPUSETS is not set
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CFQ_GROUP_IOSCHED is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX2=y
-CONFIG_ARCH_SHMOBILE=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7724_SOLUTION_ENGINE is not set
-# CONFIG_SH_KFR2R09 is not set
-# CONFIG_SH_ECOVEC is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_CLK_CPG=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_SH_CPU_FREQ=y
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
CONFIG_KEXEC_JUMP=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
# CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:19:21 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
CONFIG_CPU_SUBTYPE_SH7763=y
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
CONFIG_SH_SH7763RDP=y
-# CONFIG_SH_ESPT is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
CONFIG_MTD_BLKDEVS=y
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SH_ETH=y
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=3
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_BOTH_ENDIAN=y
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_SH_MOBILE_LCDC is not set
CONFIG_FB_SH7760=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_SUPERH_MONO=y
-CONFIG_LOGO_SUPERH_VGA16=y
-CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:20:25 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-# CONFIG_CPUSETS is not set
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CFQ_GROUP_IOSCHED is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
CONFIG_CPU_SUBTYPE_SH7770=y
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=41666666
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_SH_CPU_FREQ=y
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
CONFIG_KEXEC_JUMP=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
# CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Mon May 24 08:33:02 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_NUMA=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-
-#
-# GCOV-based kernel profiling
-#
CONFIG_GCOV_KERNEL=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX2=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7785=y
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x40000000
CONFIG_MEMORY_SIZE=0x20000000
-# CONFIG_29BIT is not set
-CONFIG_32BIT=y
CONFIG_PMB=y
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=2
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
CONFIG_SH_STORE_QUEUES=y
CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_HIGHLANDER is not set
CONFIG_SH_SH7785LCR=y
-# CONFIG_SH_SH7785LCR_PT is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_CLK_CPG=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_SH_CPU_FREQ=y
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
CONFIG_INTC_USERIMASK=y
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_DEBUG=y
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_L2TP is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-
-#
-# Some wireless drivers require a rate control algorithm
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# CAIF Support
-#
-# CONFIG_CAIF is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_AHCI_PLATFORM is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_N_GSM is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOPCA=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
CONFIG_SH_WDT=y
-# CONFIG_SH_WDT_MMAP is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_SM501=y
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_SH_MOBILE_LCDC is not set
CONFIG_FB_SM501=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_SUPERH_MONO=y
-CONFIG_LOGO_SUPERH_VGA16=y
-CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
-CONFIG_SND_VMASTER=y
-CONFIG_SND_RAWMIDI_SEQ=y
-CONFIG_SND_OPL3_LIB_SEQ=y
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_EMU10K1_SEQ=y
-CONFIG_SND_MPU401_UART=y
-CONFIG_SND_OPL3_LIB=y
-CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=y
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=y
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_SUPERH is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CANDO is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_PRODIKEYS is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EGALAX is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_ROCCAT_KONE is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_SDHCI=m
-# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=m
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SH is not set
-# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
-# CONFIG_TIMB_DMA is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
-# CONFIG_UIO_CIF is not set
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_SERCOS3 is not set
-# CONFIG_UIO_PCI_GENERIC is not set
-# CONFIG_UIO_NETX is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_KMEMLEAK=y
-CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
-# CONFIG_DEBUG_KMEMLEAK_TEST is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-CONFIG_DUMP_CODE=y
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:27:53 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_NUMA=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX2=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7785=y
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
CONFIG_SH_STORE_QUEUES=y
-# CONFIG_SPECULATIVE_EXECUTION is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_HIGHLANDER is not set
CONFIG_SH_SH7785LCR=y
-CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_CLK_CPG=y
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=y
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOPCA=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_SM501=y
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_SH_MOBILE_LCDC=m
CONFIG_FB_SM501=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
# CONFIG_LOGO_SUPERH_CLUT224 is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SH is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-# CONFIG_DUMP_CODE is not set
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:32:23 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
CONFIG_CPU_SUBTYPE_SH7706=y
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x00800000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU_EMU is not set
# CONFIG_SH_ADC is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_IPR_IRQ=y
-CONFIG_CPU_HAS_SR_RB=y
-
-#
-# Board support
-#
CONFIG_SH_SHMIN=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=32000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00210000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_SYSFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 18:08:45 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_LOCKBREAK=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_SYS_SUPPORTS_NUMA=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_COHERENT=y
-# CONFIG_DMA_NONCOHERENT is not set
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
-# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_MM_OWNER=y
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CFQ_GROUP_IOSCHED is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
CONFIG_CPU_SUBTYPE_SHX3=y
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=7
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=3
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=6
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-# CONFIG_PAGE_SIZE_4KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_64KB=y
-# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_SCHED_MC=y
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
CONFIG_SH_STORE_QUEUES=y
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
CONFIG_SH_X3PROTO=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=50000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_SH_CPU_FREQ=y
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_SECCOMP=y
CONFIG_SMP=y
-CONFIG_NR_CPUS=4
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00010000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00010000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
CONFIG_CAN_VCAN=m
-# CONFIG_CAN_DEV is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
CONFIG_SMC91X=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_SH_MSIOF is not set
-# CONFIG_SPI_SH_SCI is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SH_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DUMP_CODE=y
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:36:53 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_IPR_IRQ=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7751_SYSTEMH is not set
CONFIG_SH_SECUREEDGE5410=y
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_LBOX_RE2 is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=60000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
CONFIG_SH_DMA=y
-CONFIG_SH_DMA_IRQ_MULTI=y
CONFIG_SH_DMA_API=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=8
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
CONFIG_RTC_DRV_DS1302=y
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SH is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:39:19 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x00400000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
CONFIG_SH_7751_SYSTEMH=y
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_LBOX_RE2 is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=60000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=1024
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 17:41:12 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x08030000
CONFIG_MEMORY_SIZE=0x7fd0000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_IPR_IRQ=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_LANDISK is not set
CONFIG_SH_TITAN=y
-# CONFIG_SH_LBOX_RE2 is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
CONFIG_SH_PCLK_FREQ=30000000
-CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
CONFIG_SH_DMA=y
-CONFIG_SH_DMA_IRQ_MULTI=y
CONFIG_SH_DMA_API=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=8
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x009e0000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=y
CONFIG_BRIDGE=y
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
-# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=m
CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
CONFIG_FTL=m
CONFIG_NFTL=m
-# CONFIG_NFTL_RW is not set
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_IFB is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
-# CONFIG_8139TOO_8129 is not set
CONFIG_8139_OLD_RX_RESET=y
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
CONFIG_SH_WDT=m
-# CONFIG_SH_WDT_MMAP is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=m
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=m
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-# CONFIG_DUMP_CODE is not set
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 18:10:50 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_NUMA=y
-CONFIG_SYS_SUPPORTS_CMT=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SH4AL_DSP=y
-CONFIG_CPU_SHX2=y
-CONFIG_ARCH_SHMOBILE=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
CONFIG_CPU_SUBTYPE_SH7366=y
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x01f00000
-CONFIG_29BIT=y
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=1
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_HUGETLB_PAGE_SIZE_64K=y
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU_EMU is not set
# CONFIG_SH_DSP is not set
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_DSP=y
-
-#
-# Board support
-#
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_CLK_CPG=y
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-# CONFIG_HEARTBEAT is not set
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
-# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
CONFIG_PATA_PLATFORM=y
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_LIBERTAS_MESH is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=1
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_DWARF_UNWINDER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Tue May 18 18:13:10 2010
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-# CONFIG_SUPERH64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_SYS_SUPPORTS_NUMA=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_SYS_SUPPORTS_TMU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_DMA_COHERENT=y
-# CONFIG_DMA_NONCOHERENT is not set
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CFQ_GROUP_IOSCHED is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SHX3=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7724 is not set
-# CONFIG_CPU_SUBTYPE_SH7757 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
CONFIG_CPU_SUBTYPE_SH7786=y
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_29BIT=y
-# CONFIG_PMB is not set
-CONFIG_X2TLB=y
-CONFIG_VSYSCALL=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_IOREMAP_FIXED=y
-CONFIG_UNCACHED_MAPPING=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_HUGETLB_PAGE_SIZE_64K=y
-# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
-# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Cache configuration
-#
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
CONFIG_SH_STORE_QUEUES=y
-# CONFIG_SPECULATIVE_EXECUTION is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEAEX=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_SDK7786 is not set
CONFIG_SH_URQUELL=y
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_CLK_CPG=y
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
-# CONFIG_SMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_INTC_USERIMASK is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_OVERWRITE is not set
-# CONFIG_CMDLINE_EXTEND is not set
-
-#
-# Bus options
-#
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIEAER_INJECT is not set
-CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_DEBUG=y
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options (EXPERIMENTAL)
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOPCA=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_SM501=y
-# CONFIG_MFD_SM501_GPIO is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_IR_CORE=y
-CONFIG_VIDEO_IR=y
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_SH_MOBILE_LCDC=m
CONFIG_FB_SM501=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
# CONFIG_LOGO_SUPERH_CLUT224 is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SH=y
CONFIG_RTC_DRV_GENERIC=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
-# CONFIG_BTRFS_FS_POSIX_ACL is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
# CONFIG_DUMP_CODE is not set
-# CONFIG_DWARF_UNWINDER is not set
-# CONFIG_SH_NO_BSS_INIT is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
header-y += cachectl.h
header-y += cpu-features.h
header-y += hw_breakpoint.h
-
-unifdef-y += unistd_32.h
-unifdef-y += unistd_64.h
-unifdef-y += posix_types_32.h
-unifdef-y += posix_types_64.h
+header-y += posix_types_32.h
+header-y += posix_types_64.h
+header-y += unistd_32.h
+header-y += unistd_64.h
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#ifdef CONFIG_DMA_COHERENT
-#define dma_is_consistent(d, h) (1)
-#else
-#define dma_is_consistent(d, h) (0)
-#endif
-
-static inline int dma_get_cache_alignment(void)
-{
- /*
- * Each processor family will define its own L1_CACHE_SHIFT,
- * L1_CACHE_BYTES wraps to this, so this is always safe.
- */
- return L1_CACHE_BYTES;
-}
-
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
struct dma_map_ops *ops = get_dma_ops(dev);
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
+# define TIOCPKT_IOCTL 64
#define TIOCNOTTY _IO('T', 34) /* 0x5422 */
#define TCSETSF2 _IOW('T', 45, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */
#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */
* Some drivers need to perform DMA into kmalloc'ed buffers
* and so we have to increase the kmalloc minalign for this.
*/
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#ifdef CONFIG_SUPERH64
/*
#ifndef __ASM_SH_SCATTERLIST_H
#define __ASM_SH_SCATTERLIST_H
-#define ISA_DMA_THRESHOLD phys_addr_mask()
-
#include <asm-generic/scatterlist.h>
#endif /* __ASM_SH_SCATTERLIST_H */
asmlinkage int sys_vfork(unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs __regs);
-asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv,
+asmlinkage int sys_execve(const char __user *ufilename, char __user * __user *uargv,
char __user * __user *uenvp, unsigned long r7,
struct pt_regs __regs);
asmlinkage int sys_sigsuspend(old_sigset_t mask, unsigned long r5,
unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs *pregs);
-asmlinkage int sys_execve(char *ufilename, char **uargv,
+asmlinkage int sys_execve(const char *ufilename, char **uargv,
char **uenvp, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs *pregs);
#include <video/sh_mobile_lcdc.h>
-#ifdef CONFIG_FB_SH_MOBILE_LCDC
-void kfr2r09_lcd_on(void *board_data);
+#if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
+void kfr2r09_lcd_on(void *board_data, struct fb_info *info);
void kfr2r09_lcd_off(void *board_data);
int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
#else
-static inline void kfr2r09_lcd_on(void *board_data) {}
-static inline void kfr2r09_lcd_off(void *board_data) {}
-static inline int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
+static void kfr2r09_lcd_on(void *board_data) {}
+static void kfr2r09_lcd_off(void *board_data) {}
+static int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
{
return -ENODEV;
}
-static inline void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
+static void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
{
}
#endif
/*
* sys_execve() executes a new program.
*/
-asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv,
- char __user * __user *uenvp, unsigned long r7,
- struct pt_regs __regs)
+asmlinkage int sys_execve(const char __user *ufilename,
+ const char __user *const __user *uargv,
+ const char __user *const __user *uenvp,
+ unsigned long r7, struct pt_regs __regs)
{
struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
int error;
/*
* sys_execve() executes a new program.
*/
-asmlinkage int sys_execve(char *ufilename, char **uargv,
+asmlinkage int sys_execve(const char *ufilename, char **uargv,
char **uenvp, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs *pregs)
goto out;
error = do_execve(filename,
- (char __user * __user *)uargv,
- (char __user * __user *)uenvp,
+ (const char __user *const __user *)uargv,
+ (const char __user *const __user *)uenvp,
pregs);
putname(filename);
out:
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
register long __sc0 __asm__ ("r3") = __NR_execve;
register long __sc4 __asm__ ("r4") = (long) filename;
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
register unsigned long __sc0 __asm__ ("r9") = ((0x13 << 16) | __NR_execve);
register unsigned long __sc2 __asm__ ("r2") = (unsigned long) filename;
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Wed Mar 3 02:52:23 2010
-#
-# CONFIG_64BIT is not set
-CONFIG_SPARC=y
-CONFIG_SPARC32=y
-# CONFIG_SPARC64 is not set
-CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc32_defconfig"
-CONFIG_BITS=32
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_MMU=y
-CONFIG_HIGHMEM=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_OF=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-# CONFIG_SMP is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_EMULATED_CMPXCHG=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_SUN_PM=y
-# CONFIG_SPARC_LED is not set
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SPARC_LEON is not set
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_SBUS=y
-CONFIG_SBUSCHAR=y
CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
-CONFIG_SPARC32_PCI=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLOGICPTI=m
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SUNESP=y
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_SUNLANCE=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNBMAC=m
CONFIG_SUNQE=m
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_GRETH is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
CONFIG_SERIO=m
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_SUNCORE=y
CONFIG_SERIAL_SUNZILOG=y
CONFIG_SERIAL_SUNZILOG_CONSOLE=y
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
-# CONFIG_SERIAL_SUNSAB is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_CONSOLE_POLL=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
CONFIG_SPI_XILINX=m
CONFIG_SPI_XILINX_PLTFM=m
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-CONFIG_RTC_DRV_M48T59=y
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Misc Linux/SPARC drivers
-#
CONFIG_SUN_OPENPROMIO=m
-# CONFIG_TADPOLE_TS102_UCTRL is not set
-# CONFIG_SUN_JSFLASH is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_SUN_PARTITION=y
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
-CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
-# CONFIG_KGDB_TESTS_ON_BOOT is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
-# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.35
-# Mon Aug 9 02:31:36 2010
-#
CONFIG_64BIT=y
-CONFIG_SPARC=y
-# CONFIG_SPARC32 is not set
-CONFIG_SPARC64=y
-CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig"
-CONFIG_BITS=64
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_QUICKLIST=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_MMU=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_SYSCALL_WRAPPERS=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
CONFIG_SMP=y
-CONFIG_NR_CPUS=64
CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_SPARC64_SMP=y
-CONFIG_EARLYFB=y
-CONFIG_SPARC64_PAGE_SIZE_8KB=y
-# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
-CONFIG_SECCOMP=y
CONFIG_HOTPLUG_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_US3_MC=y
-CONFIG_HUGETLB_PAGE_SIZE_4MB=y
-# CONFIG_HUGETLB_PAGE_SIZE_512K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=4
-CONFIG_NODES_SPAN_OTHER_NODES=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_COMPACTION is not set
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
-CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_SBUS=y
-CONFIG_SBUSCHAR=y
CONFIG_SUN_LDOMS=y
CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
-CONFIG_SPARC64_PCI=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_L2TP is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-# CONFIG_DNS_RESOLVER is not set
-CONFIG_RPS=y
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-
-#
-# Some wireless drivers require a rate control algorithm
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-# CONFIG_CAIF is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-CONFIG_OF=y
-
-#
-# Flattened Device Tree and Open Firmware support
-#
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=m
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_SUNVDC=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=y
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGICPTI is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SUNESP is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
-# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_SUNLANCE=m
CONFIG_HAPPYMEAL=m
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
CONFIG_SUNGEM=m
-# CONFIG_CASSINI is not set
CONFIG_SUNVNET=m
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_GRETH is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
CONFIG_BNX2=m
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-CONFIG_CHELSIO_T4VF_DEPENDS=y
-# CONFIG_CHELSIO_T4VF is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGBEVF is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
CONFIG_NIU=m
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-
-#
-# CAIF transport drivers
-#
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=y
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_SPARCSPKR=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_ADXL34X is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_PCIPS2=m
-CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_N_GSM is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SUNCORE=y
-# CONFIG_SERIAL_SUNZILOG is not set
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
CONFIG_SERIAL_SUNSAB=y
CONFIG_SERIAL_SUNSAB_CONSOLE=y
CONFIG_SERIAL_SUNHV=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_N2RNG=m
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_RAMOOPS is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_EMC1403 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP102 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_ULTRA45 is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-CONFIG_MFD_SUPPORT=y
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TC35892 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_UVESA is not set
CONFIG_FB_SBUS=y
-# CONFIG_FB_BW2 is not set
-# CONFIG_FB_CG3 is not set
CONFIG_FB_CG6=y
CONFIG_FB_FFB=y
-# CONFIG_FB_TCX is not set
-# CONFIG_FB_CG14 is not set
-# CONFIG_FB_P9100 is not set
-# CONFIG_FB_LEO is not set
CONFIG_FB_XVR500=y
CONFIG_FB_XVR2500=y
CONFIG_FB_XVR1000=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=y
-CONFIG_FB_ATY_CT=y
-# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_SUN8x16=y
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_SUN_CLUT224=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
CONFIG_SND_ALI5451=m
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_SPARC=y
-# CONFIG_SND_SUN_AMD7930 is not set
CONFIG_SND_SUN_CS4231=m
-# CONFIG_SND_SUN_DBRI is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-CONFIG_HID_A4TECH=y
-# CONFIG_HID_ACRUX_FF is not set
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-# CONFIG_HID_CANDO is not set
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-# CONFIG_HID_PRODIKEYS is not set
-CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EGALAX is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
-CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
-CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_ROCCAT_KONE is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-# CONFIG_HID_ZYDACRON is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-CONFIG_RTC_DRV_M48T59=y
-# CONFIG_RTC_DRV_MSM6242 is not set
-CONFIG_RTC_DRV_BQ4802=y
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SUN4V=y
-CONFIG_RTC_DRV_STARFIRE=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# Misc Linux/SPARC drivers
-#
CONFIG_SUN_OPENPROMIO=y
-# CONFIG_OBP_FLASH is not set
-# CONFIG_TADPOLE_TS102_UCTRL is not set
-# CONFIG_BBC_I2C is not set
-# CONFIG_ENVCTRL is not set
-# CONFIG_DISPLAY7SEG is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_DCFLUSH is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_ASYNC_PQ=m
-CONFIG_ASYNC_RAID6_RECOV=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_TESTS=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_NIAGARA2 is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
extern void atomic64_sub(int, atomic64_t *);
extern int atomic_add_ret(int, atomic_t *);
-extern int atomic64_add_ret(int, atomic64_t *);
+extern long atomic64_add_ret(int, atomic64_t *);
extern int atomic_sub_ret(int, atomic_t *);
-extern int atomic64_sub_ret(int, atomic64_t *);
+extern long atomic64_sub_ret(int, atomic64_t *);
#define atomic_dec_return(v) atomic_sub_ret(1, v)
#define atomic64_dec_return(v) atomic64_sub_ret(1, v)
((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
+static inline long atomic64_add_unless(atomic64_t *v, long a, long u)
{
long c, old;
c = atomic64_read(v);
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h) (1)
extern struct dma_map_ops *dma_ops, pci32_dma_ops;
extern struct bus_type pci_bus_type;
return (dma_addr == DMA_ERROR_CODE);
}
-static inline int dma_get_cache_alignment(void)
-{
- /*
- * no easy way to get cache size on all processors, so return
- * the maximum possible, to be safe
- */
- return (1 << INTERNODE_CACHE_SHIFT);
-}
-
static inline int dma_set_mask(struct device *dev, u64 mask)
{
#ifdef CONFIG_PCI
#ifndef _SPARC_FB_H_
#define _SPARC_FB_H_
+#include <linux/console.h>
#include <linux/fb.h>
#include <linux/fs.h>
#include <asm/page.h>
struct device *dev = info->device;
struct device_node *node;
+ if (console_set_on_cmdline)
+ return 0;
+
node = dev->of_node;
if (node &&
node == of_console_device)
/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
#define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */
#define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */
+#define TIOCSIG _IOW('t', 136, int) /* Generate signal on Pty slave */
/* Little f */
#define FIOCLEX _IO('f', 1)
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#endif /* !(_ASM_SPARC_IOCTLS_H) */
#define RWSEM_UNLOCKED_VALUE 0x00000000
#define RWSEM_ACTIVE_BIAS 0x00000001
#define RWSEM_ACTIVE_MASK 0x0000ffff
-#define RWSEM_WAITING_BIAS 0xffff0000
+#define RWSEM_WAITING_BIAS (-0x00010000)
#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (~0UL)
#define ARCH_HAS_SG_CHAIN
#endif /* !(_SPARC_SCATTERLIST_H) */
#define FLUSHO 0x00002000
#define PENDIN 0x00004000
#define IEXTEN 0x00008000
+#define EXTPROC 0x00010000
/* modem lines */
#define TIOCM_LE 0x001
#define __NR_rt_tgsigqueueinfo 326
#define __NR_perf_event_open 327
#define __NR_recvmmsg 328
+#define __NR_fanotify_init 329
+#define __NR_fanotify_mark 330
+#define __NR_prlimit64 331
-#define NR_syscalls 329
+#define NR_syscalls 332
#ifdef __32bit_syscall_numbers__
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
if(IS_ERR(filename))
goto out;
error = do_execve(filename,
- (char __user * __user *)regs->u_regs[base + UREG_I1],
- (char __user * __user *)regs->u_regs[base + UREG_I2],
+ (const char __user *const __user *)
+ regs->u_regs[base + UREG_I1],
+ (const char __user *const __user *)
+ regs->u_regs[base + UREG_I2],
regs);
putname(filename);
out:
if (IS_ERR(filename))
goto out;
error = do_execve(filename,
- (char __user * __user *)
+ (const char __user *const __user *)
regs->u_regs[base + UREG_I1],
- (char __user * __user *)
+ (const char __user *const __user *)
regs->u_regs[base + UREG_I2], regs);
putname(filename);
if (!error) {
nop
nop
+ .globl sys32_fanotify_mark
+sys32_fanotify_mark:
+ sethi %hi(sys_fanotify_mark), %g1
+ sllx %o2, 32, %o2
+ or %o2, %o3, %o2
+ mov %o4, %o3
+ jmpl %g1 + %lo(sys_fanotify_mark), %g0
+ mov %o5, %o4
+
.section __ex_table,"a"
.align 4
.word 1b, __retl_efault, 2b, __retl_efault
return err;
}
-asmlinkage long compat_sys_stat64(char __user * filename,
+asmlinkage long compat_sys_stat64(const char __user * filename,
struct compat_stat64 __user *statbuf)
{
struct kstat stat;
return error;
}
-asmlinkage long compat_sys_lstat64(char __user * filename,
+asmlinkage long compat_sys_lstat64(const char __user * filename,
struct compat_stat64 __user *statbuf)
{
struct kstat stat;
return error;
}
-asmlinkage long compat_sys_fstatat64(unsigned int dfd, char __user *filename,
+asmlinkage long compat_sys_fstatat64(unsigned int dfd,
+ const char __user *filename,
struct compat_stat64 __user * statbuf, int flag)
{
struct kstat stat;
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
long __res;
register long __g1 __asm__ ("g1") = __NR_execve;
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
long __res;
register long __g1 __asm__ ("g1") = __NR_execve;
/*310*/ .long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
/*315*/ .long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg
+/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
+/*330*/ .long sys_fanotify_mark, sys_prlimit64
/*310*/ .word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
- .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg
+ .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
+/*330*/ .word sys32_fanotify_mark, sys_prlimit64
#endif /* CONFIG_COMPAT */
/*310*/ .word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
- .word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg
+ .word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
+/*330*/ .word sys_fanotify_mark, sys_prlimit64
# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture
-ifeq ($(CROSS_COMPILE),)
# If building with TILERA_ROOT set (i.e. using the Tilera Multicore
# Development Environment) we can set CROSS_COMPILE based on that.
-ifdef TILERA_ROOT
-CROSS_COMPILE = $(TILERA_ROOT)/bin/tile-
-endif
-endif
-
# If we're not cross-compiling, make sure we're on the right architecture.
+# Only bother to test for a few common targets, to avoid useless errors.
ifeq ($(CROSS_COMPILE),)
-HOST_ARCH = $(shell uname -m)
-ifneq ($(HOST_ARCH),$(ARCH))
+ ifdef TILERA_ROOT
+ CROSS_COMPILE := $(TILERA_ROOT)/bin/tile-
+ else
+ goals := $(if $(MAKECMDGOALS), $(MAKECMDGOALS), all)
+ ifneq ($(strip $(filter vmlinux modules all,$(goals))),)
+ HOST_ARCH := $(shell uname -m)
+ ifneq ($(HOST_ARCH),$(ARCH))
$(error Set TILERA_ROOT or CROSS_COMPILE when building $(ARCH) on $(HOST_ARCH))
-endif
+ endif
+ endif
+ endif
endif
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Thu Jun 3 13:20:05 2010
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_HAVE_ARCH_ALLOC_REMAP=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_DEFAULT_MIGRATION_COST=10000000
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_SMP=y
-CONFIG_WERROR=y
-# CONFIG_DEBUG_COPY_FROM_USER is not set
-CONFIG_HVC_TILE=y
-CONFIG_TILE=y
-# CONFIG_TILEGX is not set
-CONFIG_ARCH_DEFCONFIG="arch/tile/configs/tile_defconfig"
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="usr/contents.txt"
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-
-#
-# Tilera-specific configuration
-#
-CONFIG_NR_CPUS=64
-CONFIG_HOMECACHE=y
-CONFIG_DATAPLANE=y
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
-CONFIG_HIGHMEM=y
-CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=2
-CONFIG_FORCE_MAX_ZONEORDER=9
-# CONFIG_VMSPLIT_375G is not set
-# CONFIG_VMSPLIT_35G is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_FEEDBACK_COLLECT is not set
-CONFIG_FEEDBACK_USE=""
-# CONFIG_HUGEVMAP is not set
-CONFIG_VMALLOC_RESERVE=0x1000000
-CONFIG_HARDWALL=y
-CONFIG_MEMPROF=y
-CONFIG_XGBE=y
-CONFIG_NET_TILE=y
-CONFIG_PSEUDO_NAPI=y
-CONFIG_TILEPCI_ENDP=y
-CONFIG_TILEPCI_HOST_SUBSET=m
-CONFIG_TILE_IDE_GPIO=y
-CONFIG_TILE_SOFTUART=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_NO_IOMEM is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_DEBUG=y
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-CONFIG_E1000E=y
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_HVC_DRIVER=y
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_SAMPLES is not set
-CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_EXTRA_FLAGS="-femit-struct-debug-baseonly"
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=m
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
* The ABI requires callers to allocate a caller state save area of
* this many bytes at the bottom of each stack frame.
*/
-#ifdef __tile__
-#define C_ABI_SAVE_AREA_SIZE (2 * __SIZEOF_POINTER__)
-#endif
+#define C_ABI_SAVE_AREA_SIZE (2 * (CHIP_WORD_SIZE() / 8))
/**
* The operand to an 'info' opcode directing the backtracer to not
#define smp_mb__after_atomic_dec() do { } while (0)
#define smp_mb__after_atomic_inc() do { } while (0)
-
-/*
- * Support "tns" atomic integers. These are atomic integers that can
- * hold any value but "1". They are more efficient than regular atomic
- * operations because the "lock" (aka acquire) step is a single "tns"
- * in the uncontended case, and the "unlock" (aka release) step is a
- * single "store" without an mf. (However, note that on tilepro the
- * "tns" will evict the local cache line, so it's not all upside.)
- *
- * Note that you can ONLY observe the value stored in the pointer
- * using these operations; a direct read of the value may confusingly
- * return the special value "1".
- */
-
-int __tns_atomic_acquire(atomic_t *);
-void __tns_atomic_release(atomic_t *p, int v);
-
-static inline void tns_atomic_set(atomic_t *v, int i)
-{
- __tns_atomic_acquire(v);
- __tns_atomic_release(v, i);
-}
-
-static inline int tns_atomic_cmpxchg(atomic_t *v, int o, int n)
-{
- int ret = __tns_atomic_acquire(v);
- __tns_atomic_release(v, (ret == o) ? n : ret);
- return ret;
-}
-
-static inline int tns_atomic_xchg(atomic_t *v, int n)
-{
- int ret = __tns_atomic_acquire(v);
- __tns_atomic_release(v, n);
- return ret;
-}
-
#endif /* !__ASSEMBLY__ */
/*
#include <arch/chip.h>
-#if CHIP_VA_WIDTH() > 32
+#if defined(__tile__)
+typedef unsigned long VirtualAddress;
+#elif CHIP_VA_WIDTH() > 32
typedef unsigned long long VirtualAddress;
#else
typedef unsigned int VirtualAddress;
return (sizeof(__u64) * 8) - __builtin_clzll(w);
}
-static inline unsigned int hweight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
{
return __builtin_popcount(w);
}
-static inline unsigned int hweight16(unsigned int w)
+static inline unsigned int __arch_hweight16(unsigned int w)
{
return __builtin_popcount(w & 0xffff);
}
-static inline unsigned int hweight8(unsigned int w)
+static inline unsigned int __arch_hweight8(unsigned int w)
{
return __builtin_popcount(w & 0xff);
}
-static inline unsigned long hweight64(__u64 w)
+static inline unsigned long __arch_hweight64(__u64 w)
{
return __builtin_popcountll(w);
}
+#include <asm-generic/bitops/const_hweight.h>
#include <asm-generic/bitops/lock.h>
#include <asm-generic/bitops/sched.h>
#include <asm-generic/bitops/ext2-non-atomic.h>
#define L2_CACHE_ALIGN(x) (((x)+(L2_CACHE_BYTES-1)) & -L2_CACHE_BYTES)
/*
- * TILE-Gx is fully coherents so we don't need to define
- * ARCH_KMALLOC_MINALIGN.
+ * TILE-Gx is fully coherent so we don't need to define ARCH_DMA_MINALIGN.
*/
#ifndef __tilegx__
-#define ARCH_KMALLOC_MINALIGN L2_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L2_CACHE_BYTES
#endif
/* use the cache line size for the L2, which is where it counts */
return 0;
}
-static inline int
-dma_get_cache_alignment(void)
-{
- return L2_CACHE_BYTES;
-}
-
-#define dma_is_consistent(d, h) (1)
-
-
#endif /* _ASM_TILE_DMA_MAPPING_H */
/* This macro is used only in map_new_virtual() to map "page". */
#define kmap_prot page_to_kpgprot(page)
-void kunmap_atomic(void *kvaddr, enum km_type type);
+void kunmap_atomic_notypecheck(void *kvaddr, enum km_type type);
void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
struct page *kmap_atomic_to_page(void *ptr);
#endif
+static inline __attribute_const__ int get_order(unsigned long size)
+{
+ return BITS_PER_LONG - __builtin_clzl((size - 1) >> PAGE_SHIFT);
+}
+
#endif /* !__ASSEMBLY__ */
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
(VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
#include <asm-generic/memory_model.h>
-#include <asm-generic/getorder.h>
#endif /* __KERNEL__ */
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, version 2.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for
- * more details.
- */
-
-#ifndef _ASM_TILE_SCATTERLIST_H
-#define _ASM_TILE_SCATTERLIST_H
-
-#define ISA_DMA_THRESHOLD (~0UL)
-
#include <asm-generic/scatterlist.h>
-
-#endif /* _ASM_TILE_SCATTERLIST_H */
#ifndef _ASM_TILE_SETUP_H
#define _ASM_TILE_SETUP_H
+#define COMMAND_LINE_SIZE 2048
+
+#ifdef __KERNEL__
+
#include <linux/pfn.h>
#include <linux/init.h>
*/
#define MAXMEM_PFN PFN_DOWN(MAXMEM)
-#define COMMAND_LINE_SIZE 2048
-
void early_panic(const char *fmt, ...);
void warn_early_printk(void);
void __init disable_early_printk(void);
+#endif /* __KERNEL__ */
+
#endif /* _ASM_TILE_SETUP_H */
#define __ARCH_SI_TRAPNO
+#ifdef __LP64__
+# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#endif
+
#include <asm-generic/siginfo.h>
/*
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*/
-extern unsigned long __copy_in_user_asm(
+extern unsigned long __copy_in_user_inatomic(
void __user *to, const void __user *from, unsigned long n);
static inline unsigned long __must_check
__copy_in_user(void __user *to, const void __user *from, unsigned long n)
{
might_sleep();
- return __copy_in_user_asm(to, from, n);
+ return __copy_in_user_inatomic(to, from, n);
}
static inline unsigned long __must_check
*/
void hv_clear_intr(HV_IntrMask clear_mask);
-/** Assert a set of device interrupts.
+/** Raise a set of device interrupts.
*
- * @param assert_mask Bitmap of interrupts to clear.
+ * @param raise_mask Bitmap of interrupts to raise.
*/
-void hv_assert_intr(HV_IntrMask assert_mask);
+void hv_raise_intr(HV_IntrMask raise_mask);
/** Trigger a one-shot interrupt on some tile
*
* @param cache_control This argument allows you to specify a length of
* physical address space to flush (maximum HV_FLUSH_MAX_CACHE_LEN).
* You can "or" in HV_FLUSH_EVICT_L2 to flush the whole L2 cache.
- * You can "or" in HV_FLUSH_EVICT_LI1 to flush the whole LII cache.
+ * You can "or" in HV_FLUSH_EVICT_L1I to flush the whole L1I cache.
* HV_FLUSH_ALL flushes all caches.
* @param cache_cpumask Bitmask (in row-major order, supervisor-relative) of
* tile indices to perform cache flush on. The low bit of the first
#include <arch/chip.h>
-#if TILE_CHIP < 10
-
-
#include <asm/opcode-tile.h>
#define TREG_LR 55
+#if TILE_CHIP >= 10
+#define tile_bundle_bits tilegx_bundle_bits
+#define TILE_MAX_INSTRUCTIONS_PER_BUNDLE TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE
+#define TILE_BUNDLE_ALIGNMENT_IN_BYTES TILEGX_BUNDLE_ALIGNMENT_IN_BYTES
+#define tile_decoded_instruction tilegx_decoded_instruction
+#define tile_mnemonic tilegx_mnemonic
+#define parse_insn_tile parse_insn_tilegx
+#define TILE_OPC_IRET TILEGX_OPC_IRET
+#define TILE_OPC_ADDI TILEGX_OPC_ADDI
+#define TILE_OPC_ADDLI TILEGX_OPC_ADDLI
+#define TILE_OPC_INFO TILEGX_OPC_INFO
+#define TILE_OPC_INFOL TILEGX_OPC_INFOL
+#define TILE_OPC_JRP TILEGX_OPC_JRP
+#define TILE_OPC_MOVE TILEGX_OPC_MOVE
+#define OPCODE_STORE TILEGX_OPC_ST
+typedef long long bt_int_reg_t;
+#else
+#define OPCODE_STORE TILE_OPC_SW
+typedef int bt_int_reg_t;
+#endif
+
/** A decoded bundle used for backtracer analysis. */
struct BacktraceBundle {
tile_bundle_bits bits;
/* This implementation only makes sense for native tools. */
/** Default function to read memory. */
static bool bt_read_memory(void *result, VirtualAddress addr,
- size_t size, void *extra)
+ unsigned int size, void *extra)
{
/* FIXME: this should do some horrible signal stuff to catch
* SEGV cleanly and fail.
find_matching_insn(bundle, TILE_OPC_ADDI, vals, 2);
if (insn == NULL)
insn = find_matching_insn(bundle, TILE_OPC_ADDLI, vals, 2);
+#if TILE_CHIP >= 10
+ if (insn == NULL)
+ insn = find_matching_insn(bundle, TILEGX_OPC_ADDXLI, vals, 2);
+ if (insn == NULL)
+ insn = find_matching_insn(bundle, TILEGX_OPC_ADDXI, vals, 2);
+#endif
if (insn == NULL)
return false;
return find_matching_insn(bundle, TILE_OPC_MOVE, vals, 2) != NULL;
}
-/** Does this bundle contain the instruction 'sw sp, lr'? */
+/** Does this bundle contain a store of lr to sp? */
static inline bool bt_has_sw_sp_lr(const struct BacktraceBundle *bundle)
{
static const int vals[2] = { TREG_SP, TREG_LR };
- return find_matching_insn(bundle, TILE_OPC_SW, vals, 2) != NULL;
+ return find_matching_insn(bundle, OPCODE_STORE, vals, 2) != NULL;
+}
+
+#if TILE_CHIP >= 10
+/** Track moveli values placed into registers. */
+static inline void bt_update_moveli(const struct BacktraceBundle *bundle,
+ int moveli_args[])
+{
+ int i;
+ for (i = 0; i < bundle->num_insns; i++) {
+ const struct tile_decoded_instruction *insn =
+ &bundle->insns[i];
+
+ if (insn->opcode->mnemonic == TILEGX_OPC_MOVELI) {
+ int reg = insn->operand_values[0];
+ moveli_args[reg] = insn->operand_values[1];
+ }
+ }
}
+/** Does this bundle contain an 'add sp, sp, reg' instruction
+ * from a register that we saw a moveli into, and if so, what
+ * is the value in the register?
+ */
+static bool bt_has_add_sp(const struct BacktraceBundle *bundle, int *adjust,
+ int moveli_args[])
+{
+ static const int vals[2] = { TREG_SP, TREG_SP };
+
+ const struct tile_decoded_instruction *insn =
+ find_matching_insn(bundle, TILEGX_OPC_ADDX, vals, 2);
+ if (insn) {
+ int reg = insn->operand_values[2];
+ if (moveli_args[reg]) {
+ *adjust = moveli_args[reg];
+ return true;
+ }
+ }
+ return false;
+}
+#endif
+
/** Locates the caller's PC and SP for a program starting at the
* given address.
*/
int next_bundle = 0;
VirtualAddress pc;
+#if TILE_CHIP >= 10
+ /* Naively try to track moveli values to support addx for -m32. */
+ int moveli_args[TILEGX_NUM_REGISTERS] = { 0 };
+#endif
+
/* Default to assuming that the caller's sp is the current sp.
* This is necessary to handle the case where we start backtracing
* right at the end of the epilog.
if (!sp_determined) {
int adjust;
- if (bt_has_addi_sp(&bundle, &adjust)) {
+ if (bt_has_addi_sp(&bundle, &adjust)
+#if TILE_CHIP >= 10
+ || bt_has_add_sp(&bundle, &adjust, moveli_args)
+#endif
+ ) {
location->sp_location = SP_LOC_OFFSET;
if (adjust <= 0) {
sp_determined = true;
}
}
+
+#if TILE_CHIP >= 10
+ /* Track moveli arguments for -m32 mode. */
+ bt_update_moveli(&bundle, moveli_args);
+#endif
}
if (bt_has_iret(&bundle)) {
break;
}
- /* The frame pointer should theoretically be aligned mod 8. If
- * it's not even aligned mod 4 then something terrible happened
- * and we should mark it as invalid.
+ /* If the frame pointer is not aligned to the basic word size
+ * something terrible happened and we should mark it as invalid.
*/
- if (fp % 4 != 0)
+ if (fp % sizeof(bt_int_reg_t) != 0)
fp = -1;
/* -1 means "don't know initial_frame_caller_pc". */
state->read_memory_func_extra = read_memory_func_extra;
}
+/* Handle the case where the register holds more bits than the VA. */
+static bool valid_addr_reg(bt_int_reg_t reg)
+{
+ return ((VirtualAddress)reg == reg);
+}
+
bool backtrace_next(BacktraceIterator *state)
{
- VirtualAddress next_fp, next_pc, next_frame[2];
+ VirtualAddress next_fp, next_pc;
+ bt_int_reg_t next_frame[2];
if (state->fp == -1) {
/* No parent frame. */
}
next_fp = next_frame[1];
- if (next_fp % 4 != 0) {
- /* Caller's frame pointer is suspect, so give up.
- * Technically it should be aligned mod 8, but we will
- * be forgiving here.
- */
+ if (!valid_addr_reg(next_frame[1]) ||
+ next_fp % sizeof(bt_int_reg_t) != 0) {
+ /* Caller's frame pointer is suspect, so give up. */
return false;
}
} else {
/* Get the caller PC from the frame linkage area. */
next_pc = next_frame[0];
- if (next_pc == 0 ||
+ if (!valid_addr_reg(next_frame[0]) || next_pc == 0 ||
next_pc % TILE_BUNDLE_ALIGNMENT_IN_BYTES != 0) {
/* The PC is suspect, so give up. */
return false;
return true;
}
-
-#else /* TILE_CHIP < 10 */
-
-void backtrace_init(BacktraceIterator *state,
- BacktraceMemoryReader read_memory_func,
- void *read_memory_func_extra,
- VirtualAddress pc, VirtualAddress lr,
- VirtualAddress sp, VirtualAddress r52)
-{
- state->pc = pc;
- state->sp = sp;
- state->fp = -1;
- state->initial_frame_caller_pc = -1;
- state->read_memory_func = read_memory_func;
- state->read_memory_func_extra = read_memory_func_extra;
-}
-
-bool backtrace_next(BacktraceIterator *state) { return false; }
-
-#endif /* TILE_CHIP < 10 */
sigset_t uc_sigmask; /* mask last for extensibility */
};
+#define COMPAT_SI_PAD_SIZE ((SI_MAX_SIZE - 3 * sizeof(int)) / sizeof(int))
+
struct compat_siginfo {
int si_signo;
int si_errno;
int si_code;
union {
- int _pad[SI_PAD_SIZE];
+ int _pad[COMPAT_SI_PAD_SIZE];
/* kill() */
struct {
* able to safely read all the remaining words on those cache
* lines without waiting for the memory subsystem.
*/
- pop_reg_zero r0, r1, sp, PTREGS_OFFSET_REG(30) - PTREGS_OFFSET_REG(0)
+ pop_reg_zero r0, r28, sp, PTREGS_OFFSET_REG(30) - PTREGS_OFFSET_REG(0)
pop_reg_zero r30, r2, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(30)
pop_reg_zero r21, r3, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
pop_reg_zero lr, r4, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_EX1
{ move r22, zero; move r23, zero }
{ move r24, zero; move r25, zero }
{ move r26, zero; move r27, zero }
- { move r28, zero; move r29, zero }
+
+ /* Set r1 to errno if we are returning an error, otherwise zero. */
+ {
+ moveli r29, 1024
+ sub r1, zero, r0
+ }
+ slt_u r29, r1, r29
+ {
+ mnz r1, r29, r1
+ move r29, zero
+ }
iret
/*
#include <linux/sysctl.h>
#include <linux/hardirq.h>
#include <linux/mman.h>
-#include <linux/smp.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/sections.h>
/*
* sys_execve() executes a new program.
*/
-long _sys_execve(char __user *path, char __user *__user *argv,
- char __user *__user *envp, struct pt_regs *regs)
+long _sys_execve(const char __user *path,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp, struct pt_regs *regs)
{
long error;
char *filename;
if (rc != stat.size) {
pr_err("Error reading %d bytes from hvfs file '%s': %d\n",
stat.size, initramfs_file, rc);
- free_bootmem((unsigned long) initrd, stat.size);
+ free_initrd_mem((unsigned long) initrd, stat.size);
return;
}
initrd_start = (unsigned long) initrd;
void __init free_initrd_mem(unsigned long begin, unsigned long end)
{
- free_bootmem(begin, end - begin);
+ free_bootmem(__pa(begin), end - begin);
}
static void __init validate_hv(void)
/* Return a pt_regs pointer for a valid fault handler frame */
static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt)
{
-#ifndef __tilegx__
const char *fault = NULL; /* happy compiler */
char fault_buf[64];
VirtualAddress sp = kbt->it.sp;
}
if (!kbt->profile || (INT_MASK(p->faultnum) & QUEUED_INTERRUPTS) == 0)
return p;
-#endif
return NULL;
}
kbt->task->pid, kbt->task->tgid, kbt->task->comm,
smp_processor_id(), get_cycles());
}
-#ifdef __tilegx__
- if (kbt->is_current) {
- __insn_mtspr(SPR_SIM_CONTROL,
- SIM_DUMP_SPR_ARG(SIM_DUMP_BACKTRACE));
- }
-#endif
kbt->verbose = 1;
i = 0;
for (; !KBacktraceIterator_end(kbt); KBacktraceIterator_next(kbt)) {
/* How many cycles per second we are running at. */
static cycles_t cycles_per_sec __write_once;
-/*
- * We set up shift and multiply values with a minsec of five seconds,
- * since our timer counter counts down 31 bits at a frequency of
- * no less than 500 MHz. See @minsec for clocks_calc_mult_shift().
- * We could use a different value for the 64-bit free-running
- * cycle counter, but we use the same one for consistency, and since
- * we will be reasonably precise with this value anyway.
- */
-#define TILE_MINSEC 5
-
cycles_t get_clock_rate(void)
{
return cycles_per_sec;
}
#endif
+/*
+ * We use a relatively small shift value so that sched_clock()
+ * won't wrap around very often.
+ */
+#define SCHED_CLOCK_SHIFT 10
+
+static unsigned long sched_clock_mult __write_once;
+
static cycles_t clocksource_get_cycles(struct clocksource *cs)
{
return get_cycles();
.rating = 300,
.read = clocksource_get_cycles,
.mask = CLOCKSOURCE_MASK(64),
+ .shift = 22, /* typical value, e.g. x86 tsc uses this */
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init setup_clock(void)
{
cycles_per_sec = hv_sysconf(HV_SYSCONF_CPU_SPEED);
- clocksource_calc_mult_shift(&cycle_counter_cs, cycles_per_sec,
- TILE_MINSEC);
+ sched_clock_mult =
+ clocksource_hz2mult(cycles_per_sec, SCHED_CLOCK_SHIFT);
+ cycle_counter_cs.mult =
+ clocksource_hz2mult(cycles_per_sec, cycle_counter_cs.shift);
}
void __init calibrate_delay(void)
* counter, plus bit 31, which signifies that the counter has wrapped
* from zero to (2**31) - 1. The INT_TILE_TIMER interrupt will be
* raised as long as bit 31 is set.
+ *
+ * The TILE_MINSEC value represents the largest range of real-time
+ * we can possibly cover with the timer, based on MAX_TICK combined
+ * with the slowest reasonable clock rate we might run at.
*/
#define MAX_TICK 0x7fffffff /* we have 31 bits of countdown timer */
+#define TILE_MINSEC 5 /* timer covers no more than 5 seconds */
static int tile_timer_set_next_event(unsigned long ticks,
struct clock_event_device *evt)
unsigned long long sched_clock(void)
{
return clocksource_cyc2ns(get_cycles(),
- cycle_counter_cs.mult,
- cycle_counter_cs.shift);
+ sched_clock_mult, SCHED_CLOCK_SHIFT);
}
int setup_profiling_timer(unsigned int multiplier)
#ifdef __tilegx__
if ((bundle & TILEGX_BUNDLE_MODE_MASK) != 0)
return 0;
- if (get_Opcode_X1(bundle) != UNARY_OPCODE_X1)
+ if (get_Opcode_X1(bundle) != RRR_0_OPCODE_X1)
+ return 0;
+ if (get_RRROpcodeExtension_X1(bundle) != UNARY_RRR_0_OPCODE_X1)
return 0;
if (get_UnaryOpcodeExtension_X1(bundle) != ILL_UNARY_OPCODE_X1)
return 0;
memcpy_$(BITS).o memchr_$(BITS).o memmove_$(BITS).o memset_$(BITS).o \
strchr_$(BITS).o strlen_$(BITS).o
-ifneq ($(CONFIG_TILEGX),y)
+ifeq ($(CONFIG_TILEGX),y)
+lib-y += memcpy_user_64.o
+else
lib-y += atomic_32.o atomic_asm_32.o memcpy_tile64.o
endif
EXPORT_SYMBOL(current_text_addr);
EXPORT_SYMBOL(dump_stack);
-/* arch/tile/lib/__memcpy.S */
-/* NOTE: on TILE64, these symbols appear in arch/tile/lib/memcpy_tile64.c */
+/* arch/tile/lib/, various memcpy files */
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(__copy_to_user_inatomic);
EXPORT_SYMBOL(__copy_from_user_inatomic);
EXPORT_SYMBOL(__copy_from_user_zeroing);
+#ifdef __tilegx__
+EXPORT_SYMBOL(__copy_in_user_inatomic);
+#endif
/* hypervisor glue */
#include <hv/hypervisor.h>
EXPORT_SYMBOL(hv_dev_open);
EXPORT_SYMBOL(hv_dev_pread);
EXPORT_SYMBOL(hv_dev_pwrite);
+EXPORT_SYMBOL(hv_dev_preada);
+EXPORT_SYMBOL(hv_dev_pwritea);
+EXPORT_SYMBOL(hv_dev_poll);
+EXPORT_SYMBOL(hv_dev_poll_cancel);
EXPORT_SYMBOL(hv_dev_close);
+EXPORT_SYMBOL(hv_sysconf);
+EXPORT_SYMBOL(hv_confstr);
-/* -ltile-cc */
+/* libgcc.a */
uint32_t __udivsi3(uint32_t dividend, uint32_t divisor);
EXPORT_SYMBOL(__udivsi3);
int32_t __divsi3(int32_t dividend, int32_t divisor);
#ifndef __tilegx__
uint64_t __ll_mul(uint64_t n0, uint64_t n1);
EXPORT_SYMBOL(__ll_mul);
-#endif
-#ifndef __tilegx__
int64_t __muldi3(int64_t, int64_t);
EXPORT_SYMBOL(__muldi3);
uint64_t __lshrdi3(uint64_t, unsigned int);
#include <arch/chip.h>
-#if CHIP_HAS_WH64() || defined(MEMCPY_TEST_WH64)
-#define MEMCPY_USE_WH64
-#endif
-
#include <linux/linkage.h>
{ addi r3, r1, 60; andi r9, r9, -64 }
-#ifdef MEMCPY_USE_WH64
+#if CHIP_HAS_WH64()
/* No need to prefetch dst, we'll just do the wh64
* right before we copy a line.
*/
/* Intentionally stall for a few cycles to leave L2 cache alone. */
{ bnzt zero, . }
EX: { lw r7, r3; addi r3, r3, 64 }
-#ifndef MEMCPY_USE_WH64
+#if !CHIP_HAS_WH64()
/* Prefetch the dest */
/* Intentionally stall for a few cycles to leave L2 cache alone. */
{ bnzt zero, . }
/* Fill second L1D line. */
EX: { lw r17, r17; addi r1, r1, 48; mvz r3, r13, r1 } /* r17 = WORD_4 */
-#ifdef MEMCPY_TEST_WH64
- /* Issue a fake wh64 that clobbers the destination words
- * with random garbage, for testing.
- */
- { movei r19, 64; crc32_32 r10, r2, r9 }
-.Lwh64_test_loop:
-EX: { sw r9, r10; addi r9, r9, 4; addi r19, r19, -4 }
- { bnzt r19, .Lwh64_test_loop; crc32_32 r10, r10, r19 }
-#elif CHIP_HAS_WH64()
+#if CHIP_HAS_WH64()
/* Prepare destination line for writing. */
EX: { wh64 r9; addi r9, r9, 64 }
#else
EX: { sw r0, r16; addi r0, r0, 4; add r16, r0, r2 } /* store(WORD_0) */
EX: { sw r0, r13; addi r0, r0, 4; andi r16, r16, -64 } /* store(WORD_1) */
EX: { sw r0, r14; addi r0, r0, 4; slt_u r16, r9, r16 } /* store(WORD_2) */
-#ifdef MEMCPY_USE_WH64
+#if CHIP_HAS_WH64()
EX: { sw r0, r15; addi r0, r0, 4; addi r13, sp, -64 } /* store(WORD_3) */
#else
/* Back up the r9 to a cache line we are already storing to
*/
__insn_prefetch(&out32[ahead32]);
-#if 1
#if CACHE_LINE_SIZE_IN_WORDS % 4 != 0
#error "Unhandled CACHE_LINE_SIZE_IN_WORDS"
#endif
*out32++ = v32;
*out32++ = v32;
}
-#else
- /* Unfortunately, due to a code generator flaw this
- * allocates a separate register for each of these
- * stores, which requires a large number of spills,
- * which makes this procedure enormously bigger
- * (something like 70%)
- */
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- *out32++ = v32;
- n32 -= 16;
-#endif
/* To save compiled code size, reuse this loop even
* when we run out of prefetching to do by dropping
* since that might indicate we have not yet squirreled the SPR
* contents away and can thus safely take a recursive interrupt.
* Accordingly, the hypervisor passes us the PC via SYSTEM_SAVE_1_2.
+ *
+ * Note that this routine is called before homecache_tlb_defer_enter(),
+ * which means that we can properly unlock any atomics that might
+ * be used there (good), but also means we must be very sensitive
+ * to not touch any data structures that might be located in memory
+ * that could migrate, as we could be entering the kernel on a dataplane
+ * cpu that has been deferring kernel TLB updates. This means, for
+ * example, that we can't migrate init_mm or its pgd.
*/
struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num,
unsigned long address,
}
EXPORT_SYMBOL(kmap_atomic);
-void kunmap_atomic(void *kvaddr, enum km_type type)
+void kunmap_atomic_notypecheck(void *kvaddr, enum km_type type)
{
unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
arch_flush_lazy_mmu_mode();
pagefault_enable();
}
-EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_notypecheck);
/*
* This API is supposed to allow us to map memory without a "struct page".
#include <linux/timex.h>
#include <linux/cache.h>
#include <linux/smp.h>
+#include <linux/module.h>
#include <asm/page.h>
#include <asm/sections.h>
return pte;
}
+EXPORT_SYMBOL(pte_set_home);
/*
* The routines in this section are the "static" versions of the normal
homecache_change_page_home(page, order, home);
return page;
}
+EXPORT_SYMBOL(homecache_alloc_pages);
struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask,
unsigned int order, int home)
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/swap.h>
-#include <linux/smp.h>
#include <linux/highmem.h>
#include <linux/slab.h>
#include <linux/pagemap.h>
int ret;
#ifdef DEBUG
+ kparam_block_sysfs_write(dsp);
printk(KERN_DEBUG "hostaudio: open called (host: %s)\n", dsp);
+ kparam_unblock_sysfs_write(dsp);
#endif
state = kmalloc(sizeof(struct hostaudio_state), GFP_KERNEL);
if (file->f_mode & FMODE_WRITE)
w = 1;
+ kparam_block_sysfs_write(dsp);
lock_kernel();
ret = os_open_file(dsp, of_set_rw(OPENFLAGS(), r, w), 0);
unlock_kernel();
+ kparam_unblock_sysfs_write(dsp);
if (ret < 0) {
kfree(state);
if (file->f_mode & FMODE_WRITE)
w = 1;
+ kparam_block_sysfs_write(mixer);
lock_kernel();
ret = os_open_file(mixer, of_set_rw(OPENFLAGS(), r, w), 0);
unlock_kernel();
+ kparam_unblock_sysfs_write(mixer);
if (ret < 0) {
+ kparam_block_sysfs_write(dsp);
printk(KERN_ERR "hostaudio_open_mixdev failed to open '%s', "
"err = %d\n", dsp, -ret);
+ kparam_unblock_sysfs_write(dsp);
kfree(state);
return ret;
}
static int __init hostaudio_init_module(void)
{
+ __kernel_param_lock();
printk(KERN_INFO "UML Audio Relay (host dsp = %s, host mixer = %s)\n",
dsp, mixer);
+ __kernel_param_unlock();
module_data.dev_audio = register_sound_dsp(&hostaudio_fops, -1);
if (module_data.dev_audio < 0) {
#include "linux/mm.h"
#include "linux/slab.h"
#include "linux/vmalloc.h"
+#include "linux/smp_lock.h"
#include "linux/blkpg.h"
#include "linux/genhd.h"
#include "linux/spinlock.h"
struct ubd *ubd_dev = disk->private_data;
int err = 0;
+ lock_kernel();
if(ubd_dev->count == 0){
err = ubd_open_dev(ubd_dev);
if(err){
if(--ubd_dev->count == 0) ubd_close_dev(ubd_dev);
err = -EROFS;
}*/
- out:
+out:
+ unlock_kernel();
return err;
}
{
struct ubd *ubd_dev = disk->private_data;
+ lock_kernel();
if(--ubd_dev->count == 0)
ubd_close_dev(ubd_dev);
+ unlock_kernel();
return 0;
}
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h) (1)
static inline int
dma_get_cache_alignment(void)
long *spare_out);
extern int os_change_dir(char *dir);
extern int os_fchange_dir(int fd);
+extern unsigned os_major(unsigned long long dev);
+extern unsigned os_minor(unsigned long long dev);
+extern unsigned long long os_makedev(unsigned major, unsigned minor);
/* start_up.c */
extern void os_early_checks(void);
PT_REGS_SP(regs) = esp;
}
-static long execve1(char *file, char __user * __user *argv,
- char __user *__user *env)
+static long execve1(const char *file,
+ const char __user *const __user *argv,
+ const char __user *const __user *env)
{
long error;
return error;
}
-long um_execve(char *file, char __user *__user *argv, char __user *__user *env)
+long um_execve(const char *file, char __user *__user *argv, char __user *__user *env)
{
long err;
return err;
}
-long sys_execve(char __user *file, char __user *__user *argv,
+long sys_execve(const char __user *file, char __user *__user *argv,
char __user *__user *env)
{
long error;
-extern long um_execve(char *file, char __user *__user *argv, char __user *__user *env);
+extern long um_execve(const char *file, char __user *__user *argv, char __user *__user *env);
EXPORT_SYMBOL(os_rcv_fd);
EXPORT_SYMBOL(run_helper);
EXPORT_SYMBOL(start_thread);
+EXPORT_SYMBOL(os_major);
+EXPORT_SYMBOL(os_minor);
+EXPORT_SYMBOL(os_makedev);
EXPORT_SYMBOL(add_sigio_fd);
EXPORT_SYMBOL(ignore_sigio_fd);
return err;
}
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
mm_segment_t fs;
int ret;
fs = get_fs();
set_fs(KERNEL_DS);
- ret = um_execve((char *)filename, (char __user *__user *)argv,
+ ret = um_execve(filename, (char __user *__user *)argv,
(char __user *__user *) envp);
set_fs(fs);
out:
return err;
}
+
+unsigned os_major(unsigned long long dev)
+{
+ return major(dev);
+}
+
+unsigned os_minor(unsigned long long dev)
+{
+ return minor(dev);
+}
+
+unsigned long long os_makedev(unsigned major, unsigned minor)
+{
+ return makedev(major, minor);
+}
EXPORT_SYMBOL_PROTO(fsync);
EXPORT_SYMBOL_PROTO(fdatasync);
+EXPORT_SYMBOL_PROTO(lstat64);
+EXPORT_SYMBOL_PROTO(fstat64);
+EXPORT_SYMBOL_PROTO(mknod);
+
/* Export symbols used by GCC for the stack protector. */
extern void __stack_smash_handler(void *) __attribute__((weak));
EXPORT_SYMBOL(__stack_smash_handler);
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Mon May 11 16:21:55 2009
-#
-# CONFIG_64BIT is not set
-CONFIG_X86_32=y
-# CONFIG_X86_64 is not set
-CONFIG_X86=y
-CONFIG_OUTPUT_FORMAT="elf32-i386"
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_FAST_CMPXCHG_LOCAL=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME_VSYSCALL is not set
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
-# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ZONE_DMA32 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_AUDIT_ARCH is not set
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_X86_32_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_X86_32_LAZY_GS=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
-# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
-# CONFIG_CGROUP_MEM_RES_CTLR is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
+CONFIG_CGROUP_SCHED=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_BIGSMP is not set
-CONFIG_X86_EXTENDED_PLATFORM=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_RDC321X is not set
-# CONFIG_X86_32_NON_STANDARD is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-CONFIG_M686=y
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
-CONFIG_X86_CPU=y
-CONFIG_X86_L1_CACHE_BYTES=64
-CONFIG_X86_INTERNODE_CACHE_BYTES=64
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=5
-CONFIG_X86_XADD=y
-# CONFIG_X86_PPRO_FENCE is not set
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=4
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_CYRIX_32=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_CPU_SUP_TRANSMETA_32=y
-CONFIG_CPU_SUP_UMC_32=y
-CONFIG_X86_DS=y
-CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_DMI=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_IOMMU_API is not set
-CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
-CONFIG_X86_MCE_NONFATAL=y
-CONFIG_X86_MCE_P4THERMAL=y
-CONFIG_VM86=y
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
-CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
-# CONFIG_X86_CPU_DEBUG is not set
-# CONFIG_NOHIGHMEM is not set
-CONFIG_HIGHMEM4G=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_HIGHMEM=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
-CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
-CONFIG_X86_RESERVE_LOW_64K=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
-CONFIG_X86_PAT=y
CONFIG_EFI=y
-CONFIG_SECCOMP=y
-# CONFIG_CC_STACKPROTECTOR is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
-# CONFIG_KEXEC_JUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
-CONFIG_RELOCATABLE=y
-CONFIG_X86_NEED_RELOCS=y
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-
-#
-# Power management and ACPI options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_SYSFS_POWER=y
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=y
-# CONFIG_ACPI_SBS is not set
-# CONFIG_APM is not set
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-
-#
-# CPUFreq processor drivers
-#
CONFIG_X86_ACPI_CPUFREQ=y
-# CONFIG_X86_POWERNOW_K6 is not set
-# CONFIG_X86_POWERNOW_K7 is not set
-# CONFIG_X86_POWERNOW_K8 is not set
-# CONFIG_X86_GX_SUSPMOD is not set
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
-# CONFIG_X86_SPEEDSTEP_ICH is not set
-# CONFIG_X86_SPEEDSTEP_SMI is not set
-# CONFIG_X86_P4_CLOCKMOD is not set
-# CONFIG_X86_CPUFREQ_NFORCE2 is not set
-# CONFIG_X86_LONGRUN is not set
-# CONFIG_X86_LONGHAUL is not set
-# CONFIG_X86_E_POWERSAVER is not set
-
-#
-# shared options
-#
-# CONFIG_X86_SPEEDSTEP_LIB is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOOLPC is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-CONFIG_PCIEAER=y
-# CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-CONFIG_HT_IRQ=y
-# CONFIG_PCI_IOV is not set
-CONFIG_ISA_DMA_API=y
-# CONFIG_ISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SCx200 is not set
-# CONFIG_OLPC is not set
-CONFIG_K8_NB=y
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-# CONFIG_HOTPLUG_PCI_ACPI is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
-CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
-CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=y
-CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
-CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
-CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_NF_NAT_FTP=y
-CONFIG_NF_NAT_IRC=y
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_INGRESS is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-# CONFIG_NET_EMATCH_U32 is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-# CONFIG_AX25 is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
-# CONFIG_RFKILL_INPUT is not set
-CONFIG_RFKILL_LEDS=y
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_IBM_ASM is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_ACPI=y
-CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ACPI is not set
-# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CS5535 is not set
-# CONFIG_PATA_CS5536 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-CONFIG_ATA_GENERIC=y
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_IFB is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
-# CONFIG_VORTEX is not set
-# CONFIG_TYPHOON is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
-# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
CONFIG_SKY2=y
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
CONFIG_TR=y
-# CONFIG_IBMOL is not set
-# CONFIG_IBMLS is not set
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_P54_COMMON is not set
-CONFIG_ATH5K=y
-# CONFIG_ATH5K_DEBUG is not set
-# CONFIG_ATH9K is not set
-# CONFIG_AR9170_USB is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_HERMES is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_IBMTR is not set
-# CONFIG_WAN is not set
CONFIG_FDDI=y
-# CONFIG_DEFXX is not set
-# CONFIG_SKFP is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
-# CONFIG_TABLET_USB_ACECAD is not set
-# CONFIG_TABLET_USB_AIPTEK is not set
-# CONFIG_TABLET_USB_GTCO is not set
-# CONFIG_TABLET_USB_KBTAB is not set
-# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_INTEL=y
-CONFIG_HW_RANDOM_AMD=y
-CONFIG_HW_RANDOM_GEODE=y
-CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_MWAVE is not set
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_NSC_GPIO is not set
-# CONFIG_CS5535_GPIO is not set
-# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_SCx200_ACB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATK0110 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_PKGTEMP is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=y
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_ITCO_WDT is not set
-# CONFIG_IT8712F_WDT is not set
-# CONFIG_IT87_WDT is not set
-# CONFIG_HP_WATCHDOG is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_PC87413_WDT is not set
-# CONFIG_60XX_WDT is not set
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_SBC7240_WDT is not set
-# CONFIG_CPU5_WDT is not set
-# CONFIG_SMSC_SCH311X_WDT is not set
-# CONFIG_SMSC37B787_WDT is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83697HF_WDT is not set
-# CONFIG_W83697UG_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
CONFIG_AGP=y
-# CONFIG_AGP_ALI is not set
-# CONFIG_AGP_ATI is not set
-# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
-# CONFIG_AGP_NVIDIA is not set
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_SWORKS is not set
-# CONFIG_AGP_VIA is not set
-# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_I810 is not set
-# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
-# CONFIG_DRM_I915_KMS is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
-# CONFIG_FB_N411 is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_I810 is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_INTEL is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-# CONFIG_BACKLIGHT_PROGEAR is not set
-# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
-# CONFIG_BACKLIGHT_SAHARA is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_PCSP is not set
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
-# CONFIG_SND_HDA_RECONFIG is not set
-# CONFIG_SND_HDA_INPUT_BEEP is not set
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_ATIHDMI=y
-CONFIG_SND_HDA_CODEC_NVHDMI=y
-CONFIG_SND_HDA_CODEC_INTELHDMI=y
-CONFIG_SND_HDA_ELD=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
-# CONFIG_SND_HDA_POWER_SAVE is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SIS7019 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_US122L is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
CONFIG_HID_TOPSEED=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_ALIX2 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_CLEVO_MAIL is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
-# CONFIG_EDAC_MM_EDAC is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_INTEL_IOATDMA is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-CONFIG_X86_PLATFORM_DEVICES=y
-# CONFIG_ACER_WMI is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_TC1100_WMI is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_PANASONIC_LAPTOP is not set
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
-# CONFIG_ACPI_WMI is not set
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_TOSHIBA is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_EDD is not set
-CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
-# CONFIG_DELL_RBU is not set
-# CONFIG_DCDBAS is not set
-CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_VMCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_HW_BRANCH_TRACER=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SYSPROF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_POWER_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_HW_BRANCH_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_X86_PTDUMP is not set
-CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
-# CONFIG_4KSTACKS is not set
-CONFIG_DOUBLEFAULT=y
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
-# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
-
-#
-# Security options
-#
-CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-# CONFIG_SECURITY_SMACK is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_IMA is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SALSA20_586 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_PADLOCK is not set
-# CONFIG_CRYPTO_DEV_GEODE is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_LGUEST is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Mon May 11 16:22:00 2009
-#
CONFIG_64BIT=y
-# CONFIG_X86_32 is not set
-CONFIG_X86_64=y
-CONFIG_X86=y
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_FAST_CMPXCHG_LOCAL=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
-CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_X86_64_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_TRAMPOLINE=y
-# CONFIG_KTIME_SCALAR is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
-# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
-# CONFIG_CGROUP_MEM_RES_CTLR is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
+CONFIG_CGROUP_SCHED=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
-CONFIG_X86_MPPARSE=y
-CONFIG_X86_EXTENDED_PLATFORM=y
-# CONFIG_X86_VSMP is not set
-# CONFIG_X86_UV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_PARAVIRT_GUEST is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-CONFIG_GENERIC_CPU=y
-CONFIG_X86_CPU=y
-CONFIG_X86_L1_CACHE_BYTES=64
-CONFIG_X86_INTERNODE_CACHE_BYTES=64
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_TSC=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_X86_DS=y
-CONFIG_X86_PTRACE_BTS=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_DMI=y
-CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
-CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_IOMMU_API=y
-# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
-CONFIG_SCHED_MC=y
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-CONFIG_X86_MCE_THRESHOLD=y
-# CONFIG_I8K is not set
CONFIG_MICROCODE=y
-CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
-# CONFIG_X86_CPU_DEBUG is not set
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
-CONFIG_K8_NUMA=y
-CONFIG_X86_64_ACPI_NUMA=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-# CONFIG_NUMA_EMU is not set
-CONFIG_NODES_SHIFT=6
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
-CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
-CONFIG_X86_RESERVE_LOW_64K=y
-CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
-CONFIG_X86_PAT=y
CONFIG_EFI=y
-CONFIG_SECCOMP=y
-# CONFIG_CC_STACKPROTECTOR is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
-# CONFIG_KEXEC_JUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
-CONFIG_RELOCATABLE=y
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-
-#
-# Power management and ACPI options
-#
-CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_SYSFS_POWER=y
-CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_NUMA=y
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=y
-# CONFIG_ACPI_SBS is not set
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-
-#
-# CPUFreq processor drivers
-#
CONFIG_X86_ACPI_CPUFREQ=y
-# CONFIG_X86_POWERNOW_K8 is not set
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
-# CONFIG_X86_P4_CLOCKMOD is not set
-
-#
-# shared options
-#
-# CONFIG_X86_SPEEDSTEP_LIB is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Memory power savings
-#
-# CONFIG_I7300_IDLE is not set
-
-#
-# Bus options (PCI etc.)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
# CONFIG_DMAR_DEFAULT_ON is not set
-CONFIG_DMAR_GFX_WA=y
-CONFIG_DMAR_FLOPPY_WA=y
-# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-CONFIG_PCIEAER=y
-# CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-CONFIG_HT_IRQ=y
-# CONFIG_PCI_IOV is not set
-CONFIG_ISA_DMA_API=y
-CONFIG_K8_NB=y
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_ACPI is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-#
-# Executable file formats / Emulations
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
-# CONFIG_IA32_AOUT is not set
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
-CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
-CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=y
-CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
-CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
-CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_NF_NAT_FTP=y
-CONFIG_NF_NAT_IRC=y
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_INGRESS is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-# CONFIG_NET_EMATCH_U32 is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-# CONFIG_AX25 is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
-# CONFIG_RFKILL_INPUT is not set
-CONFIG_RFKILL_LEDS=y
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_IBM_ASM is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_ACPI=y
-CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ACPI is not set
-# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_OLDPIIX=y
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_IFB is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
-# CONFIG_VORTEX is not set
-# CONFIG_TYPHOON is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
-# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
CONFIG_SKY2=y
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
CONFIG_TR=y
-# CONFIG_IBMOL is not set
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_P54_COMMON is not set
-CONFIG_ATH5K=y
-# CONFIG_ATH5K_DEBUG is not set
-# CONFIG_ATH9K is not set
-# CONFIG_AR9170_USB is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_HERMES is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_IBMTR is not set
-# CONFIG_WAN is not set
CONFIG_FDDI=y
-# CONFIG_DEFXX is not set
-# CONFIG_SKFP is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
-# CONFIG_TABLET_USB_ACECAD is not set
-# CONFIG_TABLET_USB_AIPTEK is not set
-# CONFIG_TABLET_USB_GTCO is not set
-# CONFIG_TABLET_USB_KBTAB is not set
-# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_MWAVE is not set
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATK0110 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_PKGTEMP is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=y
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_ITCO_WDT is not set
-# CONFIG_IT8712F_WDT is not set
-# CONFIG_IT87_WDT is not set
-# CONFIG_HP_WATCHDOG is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_PC87413_WDT is not set
-# CONFIG_60XX_WDT is not set
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_CPU5_WDT is not set
-# CONFIG_SMSC_SCH311X_WDT is not set
-# CONFIG_SMSC37B787_WDT is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83697HF_WDT is not set
-# CONFIG_W83697UG_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_I810 is not set
-# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
-# CONFIG_FB_N411 is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_INTEL is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-# CONFIG_BACKLIGHT_PROGEAR is not set
-# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
-# CONFIG_BACKLIGHT_SAHARA is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_PCSP is not set
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
-# CONFIG_SND_HDA_RECONFIG is not set
-# CONFIG_SND_HDA_INPUT_BEEP is not set
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_ATIHDMI=y
-CONFIG_SND_HDA_CODEC_NVHDMI=y
-CONFIG_SND_HDA_CODEC_INTELHDMI=y
-CONFIG_SND_HDA_ELD=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
-# CONFIG_SND_HDA_POWER_SAVE is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_US122L is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
CONFIG_HID_TOPSEED=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_ALIX2 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_CLEVO_MAIL is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
-# CONFIG_EDAC_MM_EDAC is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_INTEL_IOATDMA is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-CONFIG_X86_PLATFORM_DEVICES=y
-# CONFIG_ACER_WMI is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_PANASONIC_LAPTOP is not set
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
-# CONFIG_ACPI_WMI is not set
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_TOSHIBA is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_EDD is not set
-CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
-# CONFIG_DELL_RBU is not set
-# CONFIG_DCDBAS is not set
-CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-CONFIG_PROC_VMCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_HW_BRANCH_TRACER=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SYSPROF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_POWER_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_HW_BRANCH_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_X86_PTDUMP is not set
-CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
-# CONFIG_IOMMU_DEBUG is not set
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
-# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
-
-#
-# Security options
-#
-CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-# CONFIG_SECURITY_SMACK is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_IMA is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_X86_64 is not set
-# CONFIG_CRYPTO_AES_NI_INTEL is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SALSA20_X86_64 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
.quad compat_sys_rt_tgsigqueueinfo /* 335 */
.quad sys_perf_event_open
.quad compat_sys_recvmmsg
+ .quad sys_fanotify_init
+ .quad sys32_fanotify_mark
+ .quad sys_prlimit64 /* 340 */
ia32_syscall_end:
#define AA(__x) ((unsigned long)(__x))
-asmlinkage long sys32_truncate64(char __user *filename,
+asmlinkage long sys32_truncate64(const char __user *filename,
unsigned long offset_low,
unsigned long offset_high)
{
return 0;
}
-asmlinkage long sys32_stat64(char __user *filename,
+asmlinkage long sys32_stat64(const char __user *filename,
struct stat64 __user *statbuf)
{
struct kstat stat;
return ret;
}
-asmlinkage long sys32_lstat64(char __user *filename,
+asmlinkage long sys32_lstat64(const char __user *filename,
struct stat64 __user *statbuf)
{
struct kstat stat;
return ret;
}
-asmlinkage long sys32_fstatat(unsigned int dfd, char __user *filename,
+asmlinkage long sys32_fstatat(unsigned int dfd, const char __user *filename,
struct stat64 __user *statbuf, int flag)
{
struct kstat stat;
((loff_t)AA(poshi) << 32) | AA(poslo));
}
-asmlinkage long sys32_pwrite(unsigned int fd, char __user *ubuf, u32 count,
- u32 poslo, u32 poshi)
+asmlinkage long sys32_pwrite(unsigned int fd, const char __user *ubuf,
+ u32 count, u32 poslo, u32 poshi)
{
return sys_pwrite64(fd, ubuf, count,
((loff_t)AA(poshi) << 32) | AA(poslo));
return ret;
}
-asmlinkage long sys32_execve(char __user *name, compat_uptr_t __user *argv,
+asmlinkage long sys32_execve(const char __user *name, compat_uptr_t __user *argv,
compat_uptr_t __user *envp, struct pt_regs *regs)
{
long error;
return sys_fallocate(fd, mode, ((u64)offset_hi << 32) | offset_lo,
((u64)len_hi << 32) | len_lo);
}
+
+asmlinkage long sys32_fanotify_mark(int fanotify_fd, unsigned int flags,
+ u32 mask_lo, u32 mask_hi,
+ int fd, const char __user *pathname)
+{
+ return sys_fanotify_mark(fanotify_fd, flags,
+ ((u64)mask_hi << 32) | mask_lo,
+ fd, pathname);
+}
header-y += boot.h
header-y += bootparam.h
header-y += debugreg.h
+header-y += e820.h
+header-y += hw_breakpoint.h
+header-y += hyperv.h
+header-y += ist.h
header-y += ldt.h
+header-y += mce.h
header-y += msr-index.h
+header-y += msr.h
+header-y += mtrr.h
+header-y += posix_types_32.h
+header-y += posix_types_64.h
header-y += prctl.h
+header-y += processor-flags.h
header-y += ptrace-abi.h
header-y += sigcontext32.h
header-y += ucontext.h
-header-y += processor-flags.h
-header-y += hw_breakpoint.h
-header-y += hyperv.h
-
-unifdef-y += e820.h
-unifdef-y += ist.h
-unifdef-y += mce.h
-unifdef-y += msr.h
-unifdef-y += mtrr.h
-unifdef-y += posix_types_32.h
-unifdef-y += posix_types_64.h
-unifdef-y += unistd_32.h
-unifdef-y += unistd_64.h
-unifdef-y += vm86.h
-unifdef-y += vsyscall.h
+header-y += unistd_32.h
+header-y += unistd_64.h
+header-y += vm86.h
+header-y += vsyscall.h
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h) (1)
extern int dma_supported(struct device *hwdev, u64 mask);
extern int dma_set_mask(struct device *dev, u64 mask);
flush_write_buffers();
}
-static inline int dma_get_cache_alignment(void)
-{
- /* no easy way to get cache size on all x86, so return the
- * maximum possible, to be safe */
- return boot_cpu_data.x86_clflush_size;
-}
-
static inline unsigned long dma_alloc_coherent_mask(struct device *dev,
gfp_t gfp)
{
extern void show_regs(struct pt_regs *regs);
extern unsigned long oops_begin(void);
extern void oops_end(unsigned long, struct pt_regs *, int signr);
+#ifdef CONFIG_KEXEC
+extern int in_crash_kexec;
+#else
+/* no crash dump is ever in progress if no crash kernel can be kexec'd */
+#define in_crash_kexec 0
+#endif
#endif /* _ASM_X86_KDEBUG_H */
#define __pa_nodebug(x) __phys_addr_nodebug((unsigned long)(x))
/* __pa_symbol should be used for C visible symbols.
This seems to be the official gcc blessed way to do such arithmetic. */
+/*
+ * We need __phys_reloc_hide() here because gcc may assume that there is no
+ * overflow during __pa() calculation and can optimize it unexpectedly.
+ * Newer versions of gcc provide -fno-strict-overflow switch to handle this
+ * case properly. Once all supported versions of gcc understand it, we can
+ * remove this Voodoo magic stuff. (i.e. once gcc3.x is deprecated)
+ */
#define __pa_symbol(x) __pa(__phys_reloc_hide((unsigned long)(x)))
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0x00ffffff)
#define ARCH_HAS_SG_CHAIN
#endif /* _ASM_X86_SCATTERLIST_H */
#include <asm/ia32.h>
/* ia32/sys_ia32.c */
-asmlinkage long sys32_truncate64(char __user *, unsigned long, unsigned long);
+asmlinkage long sys32_truncate64(const char __user *, unsigned long, unsigned long);
asmlinkage long sys32_ftruncate64(unsigned int, unsigned long, unsigned long);
-asmlinkage long sys32_stat64(char __user *, struct stat64 __user *);
-asmlinkage long sys32_lstat64(char __user *, struct stat64 __user *);
+asmlinkage long sys32_stat64(const char __user *, struct stat64 __user *);
+asmlinkage long sys32_lstat64(const char __user *, struct stat64 __user *);
asmlinkage long sys32_fstat64(unsigned int, struct stat64 __user *);
-asmlinkage long sys32_fstatat(unsigned int, char __user *,
+asmlinkage long sys32_fstatat(unsigned int, const char __user *,
struct stat64 __user *, int);
struct mmap_arg_struct32;
asmlinkage long sys32_mmap(struct mmap_arg_struct32 __user *);
asmlinkage long sys32_rt_sigqueueinfo(int, int, compat_siginfo_t __user *);
asmlinkage long sys32_pread(unsigned int, char __user *, u32, u32, u32);
-asmlinkage long sys32_pwrite(unsigned int, char __user *, u32, u32, u32);
+asmlinkage long sys32_pwrite(unsigned int, const char __user *, u32, u32, u32);
asmlinkage long sys32_personality(unsigned long);
asmlinkage long sys32_sendfile(int, int, compat_off_t __user *, s32);
-asmlinkage long sys32_execve(char __user *, compat_uptr_t __user *,
+asmlinkage long sys32_execve(const char __user *, compat_uptr_t __user *,
compat_uptr_t __user *, struct pt_regs *);
asmlinkage long sys32_clone(unsigned int, unsigned int, struct pt_regs *);
/* ia32/ipc32.c */
asmlinkage long sys32_ipc(u32, int, int, int, compat_uptr_t, u32);
+
+asmlinkage long sys32_fanotify_mark(int, unsigned int, u32, u32, int,
+ const char __user *);
#endif /* _ASM_X86_SYS_IA32_H */
/* kernel/process.c */
int sys_fork(struct pt_regs *);
int sys_vfork(struct pt_regs *);
-long sys_execve(char __user *, char __user * __user *,
- char __user * __user *, struct pt_regs *);
+long sys_execve(const char __user *,
+ const char __user *const __user *,
+ const char __user *const __user *, struct pt_regs *);
long sys_clone(unsigned long, unsigned long, void __user *,
void __user *, struct pt_regs *);
#define __NR_rt_tgsigqueueinfo 335
#define __NR_perf_event_open 336
#define __NR_recvmmsg 337
+#define __NR_fanotify_init 338
+#define __NR_fanotify_mark 339
+#define __NR_prlimit64 340
#ifdef __KERNEL__
-#define NR_syscalls 338
+#define NR_syscalls 341
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
__SYSCALL(__NR_perf_event_open, sys_perf_event_open)
#define __NR_recvmmsg 299
__SYSCALL(__NR_recvmmsg, sys_recvmmsg)
+#define __NR_fanotify_init 300
+__SYSCALL(__NR_fanotify_init, sys_fanotify_init)
+#define __NR_fanotify_mark 301
+__SYSCALL(__NR_fanotify_mark, sys_fanotify_mark)
+#define __NR_prlimit64 302
+__SYSCALL(__NR_prlimit64, sys_prlimit64)
#ifndef __NO_STUBS
#define __ARCH_WANT_OLD_READDIR
*/
#define UV_ITEMS_PER_DESCRIPTOR 8
+/* the 'throttle' to prevent the hardware stay-busy bug */
#define MAX_BAU_CONCURRENT 3
#define UV_CPUS_PER_ACT_STATUS 32
#define UV_ACT_STATUS_MASK 0x3
#define UV_DESC_BASE_PNODE_SHIFT 49
#define UV_PAYLOADQ_PNODE_SHIFT 49
#define UV_PTC_BASENAME "sgi_uv/ptc_statistics"
+#define UV_BAU_BASENAME "sgi_uv/bau_tunables"
+#define UV_BAU_TUNABLES_DIR "sgi_uv"
+#define UV_BAU_TUNABLES_FILE "bau_tunables"
+#define WHITESPACE " \t\n"
#define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask))
#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15
#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16
-#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x0000000009UL
+/* [19:16] SOFT_ACK timeout period 19: 1 is urgency 7 17:16 1 is multiplier */
+#define BAU_MISC_CONTROL_MULT_MASK 3
+
+#define UVH_AGING_PRESCALE_SEL 0x000000b000UL
+/* [30:28] URGENCY_7 an index into a table of times */
+#define BAU_URGENCY_7_SHIFT 28
+#define BAU_URGENCY_7_MASK 7
+
+#define UVH_TRANSACTION_TIMEOUT 0x000000b200UL
+/* [45:40] BAU - BAU transaction timeout select - a multiplier */
+#define BAU_TRANS_SHIFT 40
+#define BAU_TRANS_MASK 0x3f
/*
* bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
#define DESC_STATUS_SOURCE_TIMEOUT 3
/*
- * source side threshholds at which message retries print a warning
- */
-#define SOURCE_TIMEOUT_LIMIT 20
-#define DESTINATION_TIMEOUT_LIMIT 20
-
-/*
- * misc. delays, in microseconds
+ * delay for 'plugged' timeout retries, in microseconds
*/
-#define THROTTLE_DELAY 10
-#define TIMEOUT_DELAY 10
-#define BIOS_TO 1000
-/* BIOS is assumed to set the destination timeout to 1003520 nanoseconds */
+#define PLUGGED_DELAY 10
/*
* threshholds at which to use IPI to free resources
*/
+/* after this # consecutive 'plugged' timeouts, use IPI to release resources */
#define PLUGSB4RESET 100
-#define TIMEOUTSB4RESET 100
+/* after this many consecutive timeouts, use IPI to release resources */
+#define TIMEOUTSB4RESET 1
+/* at this number uses of IPI to release resources, giveup the request */
+#define IPI_RESET_LIMIT 1
+/* after this # consecutive successes, bump up the throttle if it was lowered */
+#define COMPLETE_THRESHOLD 5
/*
* number of entries in the destination side payload queue
#define FLUSH_GIVEUP 3
#define FLUSH_COMPLETE 4
+/*
+ * tuning the action when the numalink network is extremely delayed
+ */
+#define CONGESTED_RESPONSE_US 1000 /* 'long' response time, in microseconds */
+#define CONGESTED_REPS 10 /* long delays averaged over this many broadcasts */
+#define CONGESTED_PERIOD 30 /* time for the bau to be disabled, in seconds */
+
/*
* Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
* If the 'multilevel' flag in the header portion of the descriptor
/* bytes 24-31 */
};
-/*
- * one per-cpu; to locate the software tables
- */
-struct bau_control {
- struct bau_desc *descriptor_base;
+struct msg_desc {
+ struct bau_payload_queue_entry *msg;
+ int msg_slot;
+ int sw_ack_slot;
struct bau_payload_queue_entry *va_queue_first;
struct bau_payload_queue_entry *va_queue_last;
- struct bau_payload_queue_entry *bau_msg_head;
- struct bau_control *uvhub_master;
- struct bau_control *socket_master;
- unsigned long timeout_interval;
- atomic_t active_descriptor_count;
- int max_concurrent;
- int max_concurrent_constant;
- int retry_message_scans;
- int plugged_tries;
- int timeout_tries;
- int ipi_attempts;
- int conseccompletes;
- short cpu;
- short uvhub_cpu;
- short uvhub;
- short cpus_in_socket;
- short cpus_in_uvhub;
- unsigned short message_number;
- unsigned short uvhub_quiesce;
- short socket_acknowledge_count[DEST_Q_SIZE];
- cycles_t send_message;
- spinlock_t masks_lock;
- spinlock_t uvhub_lock;
- spinlock_t queue_lock;
+};
+
+struct reset_args {
+ int sender;
};
/*
unsigned long s_dtimeout; /* destination side timeouts */
unsigned long s_time; /* time spent in sending side */
unsigned long s_retriesok; /* successful retries */
- unsigned long s_ntargcpu; /* number of cpus targeted */
- unsigned long s_ntarguvhub; /* number of uvhubs targeted */
- unsigned long s_ntarguvhub16; /* number of times >= 16 target hubs */
- unsigned long s_ntarguvhub8; /* number of times >= 8 target hubs */
- unsigned long s_ntarguvhub4; /* number of times >= 4 target hubs */
- unsigned long s_ntarguvhub2; /* number of times >= 2 target hubs */
- unsigned long s_ntarguvhub1; /* number of times == 1 target hub */
+ unsigned long s_ntargcpu; /* total number of cpu's targeted */
+ unsigned long s_ntargself; /* times the sending cpu was targeted */
+ unsigned long s_ntarglocals; /* targets of cpus on the local blade */
+ unsigned long s_ntargremotes; /* targets of cpus on remote blades */
+ unsigned long s_ntarglocaluvhub; /* targets of the local hub */
+ unsigned long s_ntargremoteuvhub; /* remotes hubs targeted */
+ unsigned long s_ntarguvhub; /* total number of uvhubs targeted */
+ unsigned long s_ntarguvhub16; /* number of times target hubs >= 16*/
+ unsigned long s_ntarguvhub8; /* number of times target hubs >= 8 */
+ unsigned long s_ntarguvhub4; /* number of times target hubs >= 4 */
+ unsigned long s_ntarguvhub2; /* number of times target hubs >= 2 */
+ unsigned long s_ntarguvhub1; /* number of times target hubs == 1 */
unsigned long s_resets_plug; /* ipi-style resets from plug state */
unsigned long s_resets_timeout; /* ipi-style resets from timeouts */
unsigned long s_busy; /* status stayed busy past s/w timer */
unsigned long s_throttles; /* waits in throttle */
unsigned long s_retry_messages; /* retry broadcasts */
+ unsigned long s_bau_reenabled; /* for bau enable/disable */
+ unsigned long s_bau_disabled; /* for bau enable/disable */
/* destination statistics */
unsigned long d_alltlb; /* times all tlb's on this cpu were flushed */
unsigned long d_onetlb; /* times just one tlb on this cpu was flushed */
unsigned long d_rcanceled; /* number of messages canceled by resets */
};
+/*
+ * one per-cpu; to locate the software tables
+ */
+struct bau_control {
+ struct bau_desc *descriptor_base;
+ struct bau_payload_queue_entry *va_queue_first;
+ struct bau_payload_queue_entry *va_queue_last;
+ struct bau_payload_queue_entry *bau_msg_head;
+ struct bau_control *uvhub_master;
+ struct bau_control *socket_master;
+ struct ptc_stats *statp;
+ unsigned long timeout_interval;
+ unsigned long set_bau_on_time;
+ atomic_t active_descriptor_count;
+ int plugged_tries;
+ int timeout_tries;
+ int ipi_attempts;
+ int conseccompletes;
+ int baudisabled;
+ int set_bau_off;
+ short cpu;
+ short uvhub_cpu;
+ short uvhub;
+ short cpus_in_socket;
+ short cpus_in_uvhub;
+ unsigned short message_number;
+ unsigned short uvhub_quiesce;
+ short socket_acknowledge_count[DEST_Q_SIZE];
+ cycles_t send_message;
+ spinlock_t uvhub_lock;
+ spinlock_t queue_lock;
+ /* tunables */
+ int max_bau_concurrent;
+ int max_bau_concurrent_constant;
+ int plugged_delay;
+ int plugsb4reset;
+ int timeoutsb4reset;
+ int ipi_reset_limit;
+ int complete_threshold;
+ int congested_response_us;
+ int congested_reps;
+ int congested_period;
+ cycles_t period_time;
+ long period_requests;
+};
+
static inline int bau_uvhub_isset(int uvhub, struct bau_target_uvhubmask *dstp)
{
return constant_test_bit(uvhub, &dstp->bits[0]);
*/
static inline unsigned long mfn_to_local_pfn(unsigned long mfn)
{
- extern unsigned long max_mapnr;
unsigned long pfn = mfn_to_pfn(mfn);
- if ((pfn < max_mapnr)
- && !xen_feature(XENFEAT_auto_translated_physmap)
- && (get_phys_to_machine(pfn) != mfn))
- return max_mapnr; /* force !pfn_valid() */
- /* XXX fixme; not true with sparsemem */
+ if (get_phys_to_machine(pfn) != mfn)
+ return -1; /* force !pfn_valid() */
return pfn;
}
--- /dev/null
+#ifndef _ASM_X86_SWIOTLB_XEN_H
+#define _ASM_X86_SWIOTLB_XEN_H
+
+#ifdef CONFIG_SWIOTLB_XEN
+extern int xen_swiotlb;
+extern int __init pci_xen_swiotlb_detect(void);
+extern void __init pci_xen_swiotlb_init(void);
+#else
+#define xen_swiotlb (0)
+static inline int __init pci_xen_swiotlb_detect(void) { return 0; }
+static inline void __init pci_xen_swiotlb_init(void) { }
+#endif
+
+#endif /* _ASM_X86_SWIOTLB_XEN_H */
* acpi lapic path already maps that address in
* acpi_register_lapic_address()
*/
- if (!acpi_lapic)
+ if (!acpi_lapic && !smp_found_config)
set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
{
if (reason != DIE_NMI_IPI)
return NOTIFY_OK;
+
+ if (in_crash_kexec)
+ /* do nothing if entering the crash kernel */
+ return NOTIFY_OK;
/*
* Use a lock so only one cpu prints at a time
* to prevent intermixed output.
static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data);
/* acpi_perf_data is a pointer to percpu data. */
-static struct acpi_processor_performance *acpi_perf_data;
+static struct acpi_processor_performance __percpu *acpi_perf_data;
static struct cpufreq_driver acpi_cpufreq_driver;
u32 output_offset;
};
-static struct pcc_cpu *pcc_cpu_info;
+static struct pcc_cpu __percpu *pcc_cpu_info;
static int pcc_cpufreq_verify(struct cpufreq_policy *policy)
{
rcd.hdr.revision = CPER_RECORD_REV;
rcd.hdr.signature_end = CPER_SIG_END;
rcd.hdr.section_count = 1;
- rcd.hdr.error_severity = CPER_SER_FATAL;
+ rcd.hdr.error_severity = CPER_SEV_FATAL;
/* timestamp, platform_id, partition_id are all invalid */
rcd.hdr.validation_bits = 0;
rcd.hdr.record_length = sizeof(rcd);
rcd.sec_hdr.validation_bits = 0;
rcd.sec_hdr.flags = CPER_SEC_PRIMARY;
rcd.sec_hdr.section_type = CPER_SECTION_TYPE_MCE;
- rcd.sec_hdr.section_severity = CPER_SER_FATAL;
+ rcd.sec_hdr.section_severity = CPER_SEV_FATAL;
memcpy(&rcd.mce, m, sizeof(*m));
cpuc = &__get_cpu_var(cpu_hw_events);
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+ int overflow;
if (!test_bit(idx, cpuc->active_mask))
continue;
WARN_ON_ONCE(hwc->idx != idx);
/* it might be unflagged overflow */
- handled = p4_pmu_clear_cccr_ovf(hwc);
+ overflow = p4_pmu_clear_cccr_ovf(hwc);
val = x86_perf_event_update(event);
- if (!handled && (val & (1ULL << (x86_pmu.cntval_bits - 1))))
+ if (!overflow && (val & (1ULL << (x86_pmu.cntval_bits - 1))))
continue;
+ handled += overflow;
+
/* event overflow for sure */
data.period = event->hw.last_period;
inc_irq_stat(apic_perf_irqs);
}
- return handled;
+ return handled > 0;
}
/*
#include <asm/reboot.h>
#include <asm/virtext.h>
+int in_crash_kexec;
+
#if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
static void kdump_nmi_callback(int cpu, struct die_args *args)
static void kdump_nmi_shootdown_cpus(void)
{
+ in_crash_kexec = 1;
nmi_shootdown_cpus(kdump_nmi_callback);
disable_local_APIC();
* execve(). This function needs to use IRET, not SYSRET, to set up all state properly.
*
* C extern interface:
- * extern long execve(char *name, char **argv, char **envp)
+ * extern long execve(const char *name, char **argv, char **envp)
*
* asm input arguments:
* rdi: name, rsi: argv, rdx: envp
*
* We want to fallback into:
- * extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs *regs)
+ * extern long sys_execve(const char *name, char **argv,char **envp, struct pt_regs *regs)
*
* do_sys_execve asm fallback arguments:
* rdi: name, rsi: argv, rdx: envp, rcx: fake frame on the stack
* scaled math multiplication factor for nanosecond to hpet tick
* conversion.
*/
- hpet_freq = 1000000000000000ULL;
+ hpet_freq = FSEC_PER_SEC;
do_div(hpet_freq, hpet_period);
evt->mult = div_sc((unsigned long) hpet_freq,
NSEC_PER_SEC, evt->shift);
* cyc/sec = FSEC_PER_SEC/hpet_period(fsec/cyc)
* cyc/sec = (FSEC_PER_NSEC * NSEC_PER_SEC)/hpet_period
*/
- hpet_freq = FSEC_PER_NSEC * NSEC_PER_SEC;
+ hpet_freq = FSEC_PER_SEC;
do_div(hpet_freq, hpet_period);
clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq);
unsigned long addr;
int len;
int type;
- struct perf_event **pev;
+ struct perf_event * __percpu *pev;
} breakinfo[HBP_NUM];
static unsigned long early_dr7;
void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { }
+static void __init smp_register_lapic_address(unsigned long address)
+{
+ mp_lapic_addr = address;
+
+ set_fixmap_nocache(FIX_APIC_BASE, address);
+ if (boot_cpu_physical_apicid == -1U) {
+ boot_cpu_physical_apicid = read_apic_id();
+ apic_version[boot_cpu_physical_apicid] =
+ GET_APIC_VERSION(apic_read(APIC_LVR));
+ }
+}
+
static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
{
char str[16];
if (early)
return 1;
+ /* Initialize the lapic mapping */
+ if (!acpi_lapic)
+ smp_register_lapic_address(mpc->lapic);
+
if (mpc->oemptr)
x86_init.mpparse.smp_read_mpc_oem(mpc);
#include <asm/calgary.h>
#include <asm/amd_iommu.h>
#include <asm/x86_init.h>
+#include <asm/xen/swiotlb-xen.h>
static int forbid_dac __read_mostly;
/* free the range so iommu could get some range less than 4G */
dma32_free_bootmem();
- if (pci_swiotlb_detect())
+ if (pci_xen_swiotlb_detect() || pci_swiotlb_detect())
goto out;
gart_iommu_hole_init();
/* needs to be called after gart_iommu_hole_init */
amd_iommu_detect();
out:
+ pci_xen_swiotlb_init();
+
pci_swiotlb_init();
}
#endif
x86_init.iommu.iommu_init();
- if (swiotlb) {
+ if (swiotlb || xen_swiotlb) {
printk(KERN_INFO "PCI-DMA: "
"Using software bounce buffering for IO (SWIOTLB)\n");
swiotlb_print_info();
/*
* sys_execve() executes a new program.
*/
-long sys_execve(char __user *name, char __user * __user *argv,
- char __user * __user *envp, struct pt_regs *regs)
+long sys_execve(const char __user *name,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp, struct pt_regs *regs)
{
long error;
char *filename;
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
{
long __res;
asm volatile ("push %%ebx ; movl %2,%%ebx ; int $0x80 ; pop %%ebx"
.long sys_rt_tgsigqueueinfo /* 335 */
.long sys_perf_event_open
.long sys_recvmmsg
+ .long sys_fanotify_init
+ .long sys_fanotify_mark
+ .long sys_prlimit64 /* 340 */
*/
#include <linux/seq_file.h>
#include <linux/proc_fs.h>
+#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <asm/irq_vectors.h>
#include <asm/timer.h>
-struct msg_desc {
- struct bau_payload_queue_entry *msg;
- int msg_slot;
- int sw_ack_slot;
- struct bau_payload_queue_entry *va_queue_first;
- struct bau_payload_queue_entry *va_queue_last;
+/* timeouts in nanoseconds (indexed by UVH_AGING_PRESCALE_SEL urgency7 30:28) */
+static int timeout_base_ns[] = {
+ 20,
+ 160,
+ 1280,
+ 10240,
+ 81920,
+ 655360,
+ 5242880,
+ 167772160
};
-
-#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL
-
-static int uv_bau_max_concurrent __read_mostly;
-
+static int timeout_us;
static int nobau;
+static int baudisabled;
+static spinlock_t disable_lock;
+static cycles_t congested_cycles;
+
+/* tunables: */
+static int max_bau_concurrent = MAX_BAU_CONCURRENT;
+static int max_bau_concurrent_constant = MAX_BAU_CONCURRENT;
+static int plugged_delay = PLUGGED_DELAY;
+static int plugsb4reset = PLUGSB4RESET;
+static int timeoutsb4reset = TIMEOUTSB4RESET;
+static int ipi_reset_limit = IPI_RESET_LIMIT;
+static int complete_threshold = COMPLETE_THRESHOLD;
+static int congested_response_us = CONGESTED_RESPONSE_US;
+static int congested_reps = CONGESTED_REPS;
+static int congested_period = CONGESTED_PERIOD;
+static struct dentry *tunables_dir;
+static struct dentry *tunables_file;
+
static int __init setup_nobau(char *arg)
{
nobau = 1;
static DEFINE_PER_CPU(struct bau_control, bau_control);
static DEFINE_PER_CPU(cpumask_var_t, uv_flush_tlb_mask);
-struct reset_args {
- int sender;
-};
-
/*
* Determine the first node on a uvhub. 'Nodes' are used for kernel
* memory allocation.
struct ptc_stats *stat;
msg = mdp->msg;
- stat = &per_cpu(ptcstats, bcp->cpu);
+ stat = bcp->statp;
stat->d_retries++;
/*
* cancel any message from msg+1 to the retry itself
slot2 = msg2 - mdp->va_queue_first;
mmr = uv_read_local_mmr
(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
- msg_res = ((msg2->sw_ack_vector << 8) |
- msg2->sw_ack_vector);
+ msg_res = msg2->sw_ack_vector;
/*
* This is a message retry; clear the resources held
* by the previous message only if they timed out.
* If it has not timed out we have an unexpected
* situation to report.
*/
- if (mmr & (msg_res << 8)) {
+ if (mmr & (msg_res << UV_SW_ACK_NPENDING)) {
/*
* is the resource timed out?
* make everyone ignore the cancelled message.
cancel_count++;
uv_write_local_mmr(
UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS,
- (msg_res << 8) | msg_res);
- } else
- printk(KERN_INFO "note bau retry: no effect\n");
+ (msg_res << UV_SW_ACK_NPENDING) |
+ msg_res);
+ }
}
}
if (!cancel_count)
* This must be a normal message, or retry of a normal message
*/
msg = mdp->msg;
- stat = &per_cpu(ptcstats, bcp->cpu);
+ stat = bcp->statp;
if (msg->address == TLB_FLUSH_ALL) {
local_flush_tlb();
stat->d_alltlb++;
bcp = &per_cpu(bau_control, smp_processor_id());
rap = (struct reset_args *)ptr;
- stat = &per_cpu(ptcstats, bcp->cpu);
+ stat = bcp->statp;
stat->d_resets++;
/*
*/
mmr = uv_read_local_mmr
(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
- msg_res = ((msg->sw_ack_vector << 8) |
- msg->sw_ack_vector);
+ msg_res = msg->sw_ack_vector;
if (mmr & msg_res) {
stat->d_rcanceled++;
uv_write_local_mmr(
UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS,
- msg_res);
+ (msg_res << UV_SW_ACK_NPENDING) |
+ msg_res);
}
}
}
unsigned long mmr_offset, int right_shift, int this_cpu,
struct bau_control *bcp, struct bau_control *smaster, long try)
{
- int relaxes = 0;
unsigned long descriptor_status;
- unsigned long mmr;
- unsigned long mask;
cycles_t ttime;
- cycles_t timeout_time;
- struct ptc_stats *stat = &per_cpu(ptcstats, this_cpu);
+ struct ptc_stats *stat = bcp->statp;
struct bau_control *hmaster;
hmaster = bcp->uvhub_master;
- timeout_time = get_cycles() + bcp->timeout_interval;
/* spin on the status MMR, waiting for it to go idle */
while ((descriptor_status = (((unsigned long)
* pending. In that case hardware returns the
* ERROR that looks like a destination timeout.
*/
- if (cycles_2_us(ttime - bcp->send_message) < BIOS_TO) {
+ if (cycles_2_us(ttime - bcp->send_message) <
+ timeout_us) {
bcp->conseccompletes = 0;
return FLUSH_RETRY_PLUGGED;
}
* descriptor_status is still BUSY
*/
cpu_relax();
- relaxes++;
- if (relaxes >= 10000) {
- relaxes = 0;
- if (get_cycles() > timeout_time) {
- quiesce_local_uvhub(hmaster);
-
- /* single-thread the register change */
- spin_lock(&hmaster->masks_lock);
- mmr = uv_read_local_mmr(mmr_offset);
- mask = 0UL;
- mask |= (3UL < right_shift);
- mask = ~mask;
- mmr &= mask;
- uv_write_local_mmr(mmr_offset, mmr);
- spin_unlock(&hmaster->masks_lock);
- end_uvhub_quiesce(hmaster);
- stat->s_busy++;
- return FLUSH_GIVEUP;
- }
- }
}
}
bcp->conseccompletes++;
return 1;
}
+/*
+ * Our retries are blocked by all destination swack resources being
+ * in use, and a timeout is pending. In that case hardware immediately
+ * returns the ERROR that looks like a destination timeout.
+ */
+static void
+destination_plugged(struct bau_desc *bau_desc, struct bau_control *bcp,
+ struct bau_control *hmaster, struct ptc_stats *stat)
+{
+ udelay(bcp->plugged_delay);
+ bcp->plugged_tries++;
+ if (bcp->plugged_tries >= bcp->plugsb4reset) {
+ bcp->plugged_tries = 0;
+ quiesce_local_uvhub(hmaster);
+ spin_lock(&hmaster->queue_lock);
+ uv_reset_with_ipi(&bau_desc->distribution, bcp->cpu);
+ spin_unlock(&hmaster->queue_lock);
+ end_uvhub_quiesce(hmaster);
+ bcp->ipi_attempts++;
+ stat->s_resets_plug++;
+ }
+}
+
+static void
+destination_timeout(struct bau_desc *bau_desc, struct bau_control *bcp,
+ struct bau_control *hmaster, struct ptc_stats *stat)
+{
+ hmaster->max_bau_concurrent = 1;
+ bcp->timeout_tries++;
+ if (bcp->timeout_tries >= bcp->timeoutsb4reset) {
+ bcp->timeout_tries = 0;
+ quiesce_local_uvhub(hmaster);
+ spin_lock(&hmaster->queue_lock);
+ uv_reset_with_ipi(&bau_desc->distribution, bcp->cpu);
+ spin_unlock(&hmaster->queue_lock);
+ end_uvhub_quiesce(hmaster);
+ bcp->ipi_attempts++;
+ stat->s_resets_timeout++;
+ }
+}
+
+/*
+ * Completions are taking a very long time due to a congested numalink
+ * network.
+ */
+static void
+disable_for_congestion(struct bau_control *bcp, struct ptc_stats *stat)
+{
+ int tcpu;
+ struct bau_control *tbcp;
+
+ /* let only one cpu do this disabling */
+ spin_lock(&disable_lock);
+ if (!baudisabled && bcp->period_requests &&
+ ((bcp->period_time / bcp->period_requests) > congested_cycles)) {
+ /* it becomes this cpu's job to turn on the use of the
+ BAU again */
+ baudisabled = 1;
+ bcp->set_bau_off = 1;
+ bcp->set_bau_on_time = get_cycles() +
+ sec_2_cycles(bcp->congested_period);
+ stat->s_bau_disabled++;
+ for_each_present_cpu(tcpu) {
+ tbcp = &per_cpu(bau_control, tcpu);
+ tbcp->baudisabled = 1;
+ }
+ }
+ spin_unlock(&disable_lock);
+}
+
/**
* uv_flush_send_and_wait
*
* Send a broadcast and wait for it to complete.
*
- * The flush_mask contains the cpus the broadcast is to be sent to, plus
+ * The flush_mask contains the cpus the broadcast is to be sent to including
* cpus that are on the local uvhub.
*
- * Returns NULL if all flushing represented in the mask was done. The mask
- * is zeroed.
- * Returns @flush_mask if some remote flushing remains to be done. The
- * mask will have some bits still set, representing any cpus on the local
- * uvhub (not current cpu) and any on remote uvhubs if the broadcast failed.
+ * Returns 0 if all flushing represented in the mask was done.
+ * Returns 1 if it gives up entirely and the original cpu mask is to be
+ * returned to the kernel.
*/
-const struct cpumask *uv_flush_send_and_wait(struct bau_desc *bau_desc,
- struct cpumask *flush_mask,
- struct bau_control *bcp)
+int uv_flush_send_and_wait(struct bau_desc *bau_desc,
+ struct cpumask *flush_mask, struct bau_control *bcp)
{
int right_shift;
- int uvhub;
- int bit;
int completion_status = 0;
int seq_number = 0;
long try = 0;
int cpu = bcp->uvhub_cpu;
int this_cpu = bcp->cpu;
- int this_uvhub = bcp->uvhub;
unsigned long mmr_offset;
unsigned long index;
cycles_t time1;
cycles_t time2;
- struct ptc_stats *stat = &per_cpu(ptcstats, bcp->cpu);
+ cycles_t elapsed;
+ struct ptc_stats *stat = bcp->statp;
struct bau_control *smaster = bcp->socket_master;
struct bau_control *hmaster = bcp->uvhub_master;
- /*
- * Spin here while there are hmaster->max_concurrent or more active
- * descriptors. This is the per-uvhub 'throttle'.
- */
if (!atomic_inc_unless_ge(&hmaster->uvhub_lock,
&hmaster->active_descriptor_count,
- hmaster->max_concurrent)) {
+ hmaster->max_bau_concurrent)) {
stat->s_throttles++;
do {
cpu_relax();
} while (!atomic_inc_unless_ge(&hmaster->uvhub_lock,
&hmaster->active_descriptor_count,
- hmaster->max_concurrent));
+ hmaster->max_bau_concurrent));
}
-
while (hmaster->uvhub_quiesce)
cpu_relax();
}
time1 = get_cycles();
do {
- /*
- * Every message from any given cpu gets a unique message
- * sequence number. But retries use that same number.
- * Our message may have timed out at the destination because
- * all sw-ack resources are in use and there is a timeout
- * pending there. In that case, our last send never got
- * placed into the queue and we need to persist until it
- * does.
- *
- * Make any retry a type MSG_RETRY so that the destination will
- * free any resource held by a previous message from this cpu.
- */
if (try == 0) {
- /* use message type set by the caller the first time */
+ bau_desc->header.msg_type = MSG_REGULAR;
seq_number = bcp->message_number++;
} else {
- /* use RETRY type on all the rest; same sequence */
bau_desc->header.msg_type = MSG_RETRY;
stat->s_retry_messages++;
}
index = (1UL << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) |
bcp->uvhub_cpu;
bcp->send_message = get_cycles();
-
uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index);
-
try++;
completion_status = uv_wait_completion(bau_desc, mmr_offset,
right_shift, this_cpu, bcp, smaster, try);
if (completion_status == FLUSH_RETRY_PLUGGED) {
- /*
- * Our retries may be blocked by all destination swack
- * resources being consumed, and a timeout pending. In
- * that case hardware immediately returns the ERROR
- * that looks like a destination timeout.
- */
- udelay(TIMEOUT_DELAY);
- bcp->plugged_tries++;
- if (bcp->plugged_tries >= PLUGSB4RESET) {
- bcp->plugged_tries = 0;
- quiesce_local_uvhub(hmaster);
- spin_lock(&hmaster->queue_lock);
- uv_reset_with_ipi(&bau_desc->distribution,
- this_cpu);
- spin_unlock(&hmaster->queue_lock);
- end_uvhub_quiesce(hmaster);
- bcp->ipi_attempts++;
- stat->s_resets_plug++;
- }
+ destination_plugged(bau_desc, bcp, hmaster, stat);
} else if (completion_status == FLUSH_RETRY_TIMEOUT) {
- hmaster->max_concurrent = 1;
- bcp->timeout_tries++;
- udelay(TIMEOUT_DELAY);
- if (bcp->timeout_tries >= TIMEOUTSB4RESET) {
- bcp->timeout_tries = 0;
- quiesce_local_uvhub(hmaster);
- spin_lock(&hmaster->queue_lock);
- uv_reset_with_ipi(&bau_desc->distribution,
- this_cpu);
- spin_unlock(&hmaster->queue_lock);
- end_uvhub_quiesce(hmaster);
- bcp->ipi_attempts++;
- stat->s_resets_timeout++;
- }
+ destination_timeout(bau_desc, bcp, hmaster, stat);
}
- if (bcp->ipi_attempts >= 3) {
+ if (bcp->ipi_attempts >= bcp->ipi_reset_limit) {
bcp->ipi_attempts = 0;
completion_status = FLUSH_GIVEUP;
break;
} while ((completion_status == FLUSH_RETRY_PLUGGED) ||
(completion_status == FLUSH_RETRY_TIMEOUT));
time2 = get_cycles();
-
- if ((completion_status == FLUSH_COMPLETE) && (bcp->conseccompletes > 5)
- && (hmaster->max_concurrent < hmaster->max_concurrent_constant))
- hmaster->max_concurrent++;
-
- /*
- * hold any cpu not timing out here; no other cpu currently held by
- * the 'throttle' should enter the activation code
- */
+ bcp->plugged_tries = 0;
+ bcp->timeout_tries = 0;
+ if ((completion_status == FLUSH_COMPLETE) &&
+ (bcp->conseccompletes > bcp->complete_threshold) &&
+ (hmaster->max_bau_concurrent <
+ hmaster->max_bau_concurrent_constant))
+ hmaster->max_bau_concurrent++;
while (hmaster->uvhub_quiesce)
cpu_relax();
atomic_dec(&hmaster->active_descriptor_count);
-
- /* guard against cycles wrap */
- if (time2 > time1)
- stat->s_time += (time2 - time1);
- else
- stat->s_requestor--; /* don't count this one */
+ if (time2 > time1) {
+ elapsed = time2 - time1;
+ stat->s_time += elapsed;
+ if ((completion_status == FLUSH_COMPLETE) && (try == 1)) {
+ bcp->period_requests++;
+ bcp->period_time += elapsed;
+ if ((elapsed > congested_cycles) &&
+ (bcp->period_requests > bcp->congested_reps)) {
+ disable_for_congestion(bcp, stat);
+ }
+ }
+ } else
+ stat->s_requestor--;
if (completion_status == FLUSH_COMPLETE && try > 1)
stat->s_retriesok++;
else if (completion_status == FLUSH_GIVEUP) {
- /*
- * Cause the caller to do an IPI-style TLB shootdown on
- * the target cpu's, all of which are still in the mask.
- */
stat->s_giveup++;
- return flush_mask;
- }
-
- /*
- * Success, so clear the remote cpu's from the mask so we don't
- * use the IPI method of shootdown on them.
- */
- for_each_cpu(bit, flush_mask) {
- uvhub = uv_cpu_to_blade_id(bit);
- if (uvhub == this_uvhub)
- continue;
- cpumask_clear_cpu(bit, flush_mask);
+ return 1;
}
- if (!cpumask_empty(flush_mask))
- return flush_mask;
-
- return NULL;
+ return 0;
}
/**
struct mm_struct *mm,
unsigned long va, unsigned int cpu)
{
- int remotes;
int tcpu;
int uvhub;
int locals = 0;
+ int remotes = 0;
+ int hubs = 0;
struct bau_desc *bau_desc;
struct cpumask *flush_mask;
struct ptc_stats *stat;
struct bau_control *bcp;
+ struct bau_control *tbcp;
+ /* kernel was booted 'nobau' */
if (nobau)
return cpumask;
bcp = &per_cpu(bau_control, cpu);
+ stat = bcp->statp;
+
+ /* bau was disabled due to slow response */
+ if (bcp->baudisabled) {
+ /* the cpu that disabled it must re-enable it */
+ if (bcp->set_bau_off) {
+ if (get_cycles() >= bcp->set_bau_on_time) {
+ stat->s_bau_reenabled++;
+ baudisabled = 0;
+ for_each_present_cpu(tcpu) {
+ tbcp = &per_cpu(bau_control, tcpu);
+ tbcp->baudisabled = 0;
+ tbcp->period_requests = 0;
+ tbcp->period_time = 0;
+ }
+ }
+ }
+ return cpumask;
+ }
+
/*
* Each sending cpu has a per-cpu mask which it fills from the caller's
- * cpu mask. Only remote cpus are converted to uvhubs and copied.
+ * cpu mask. All cpus are converted to uvhubs and copied to the
+ * activation descriptor.
*/
flush_mask = (struct cpumask *)per_cpu(uv_flush_tlb_mask, cpu);
- /*
- * copy cpumask to flush_mask, removing current cpu
- * (current cpu should already have been flushed by the caller and
- * should never be returned if we return flush_mask)
- */
+ /* don't actually do a shootdown of the local cpu */
cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
if (cpu_isset(cpu, *cpumask))
- locals++; /* current cpu was targeted */
+ stat->s_ntargself++;
bau_desc = bcp->descriptor_base;
bau_desc += UV_ITEMS_PER_DESCRIPTOR * bcp->uvhub_cpu;
-
bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
- remotes = 0;
+
+ /* cpu statistics */
for_each_cpu(tcpu, flush_mask) {
uvhub = uv_cpu_to_blade_id(tcpu);
- if (uvhub == bcp->uvhub) {
- locals++;
- continue;
- }
bau_uvhub_set(uvhub, &bau_desc->distribution);
- remotes++;
- }
- if (remotes == 0) {
- /*
- * No off_hub flushing; return status for local hub.
- * Return the caller's mask if all were local (the current
- * cpu may be in that mask).
- */
- if (locals)
- return cpumask;
+ if (uvhub == bcp->uvhub)
+ locals++;
else
- return NULL;
+ remotes++;
}
- stat = &per_cpu(ptcstats, cpu);
+ if ((locals + remotes) == 0)
+ return NULL;
stat->s_requestor++;
- stat->s_ntargcpu += remotes;
+ stat->s_ntargcpu += remotes + locals;
+ stat->s_ntargremotes += remotes;
+ stat->s_ntarglocals += locals;
remotes = bau_uvhub_weight(&bau_desc->distribution);
- stat->s_ntarguvhub += remotes;
- if (remotes >= 16)
+
+ /* uvhub statistics */
+ hubs = bau_uvhub_weight(&bau_desc->distribution);
+ if (locals) {
+ stat->s_ntarglocaluvhub++;
+ stat->s_ntargremoteuvhub += (hubs - 1);
+ } else
+ stat->s_ntargremoteuvhub += hubs;
+ stat->s_ntarguvhub += hubs;
+ if (hubs >= 16)
stat->s_ntarguvhub16++;
- else if (remotes >= 8)
+ else if (hubs >= 8)
stat->s_ntarguvhub8++;
- else if (remotes >= 4)
+ else if (hubs >= 4)
stat->s_ntarguvhub4++;
- else if (remotes >= 2)
+ else if (hubs >= 2)
stat->s_ntarguvhub2++;
else
stat->s_ntarguvhub1++;
bau_desc->payload.sending_cpu = cpu;
/*
- * uv_flush_send_and_wait returns null if all cpu's were messaged, or
- * the adjusted flush_mask if any cpu's were not messaged.
+ * uv_flush_send_and_wait returns 0 if all cpu's were messaged,
+ * or 1 if it gave up and the original cpumask should be returned.
*/
- return uv_flush_send_and_wait(bau_desc, flush_mask, bcp);
+ if (!uv_flush_send_and_wait(bau_desc, flush_mask, bcp))
+ return NULL;
+ else
+ return cpumask;
}
/*
time_start = get_cycles();
bcp = &per_cpu(bau_control, smp_processor_id());
- stat = &per_cpu(ptcstats, smp_processor_id());
+ stat = bcp->statp;
msgdesc.va_queue_first = bcp->va_queue_first;
msgdesc.va_queue_last = bcp->va_queue_last;
msg = bcp->bau_msg_head;
}
static inline unsigned long long
-millisec_2_cycles(unsigned long millisec)
+microsec_2_cycles(unsigned long microsec)
{
unsigned long ns;
unsigned long long cyc;
- ns = millisec * 1000;
+ ns = microsec * 1000;
cyc = (ns << CYC2NS_SCALE_FACTOR)/(per_cpu(cyc2ns, smp_processor_id()));
return cyc;
}
if (!cpu) {
seq_printf(file,
- "# cpu sent stime numuvhubs numuvhubs16 numuvhubs8 ");
+ "# cpu sent stime self locals remotes ncpus localhub ");
+ seq_printf(file,
+ "remotehub numuvhubs numuvhubs16 numuvhubs8 ");
seq_printf(file,
- "numuvhubs4 numuvhubs2 numuvhubs1 numcpus dto ");
+ "numuvhubs4 numuvhubs2 numuvhubs1 dto ");
seq_printf(file,
"retries rok resetp resett giveup sto bz throt ");
seq_printf(file,
"sw_ack recv rtime all ");
seq_printf(file,
- "one mult none retry canc nocan reset rcan\n");
+ "one mult none retry canc nocan reset rcan ");
+ seq_printf(file,
+ "disable enable\n");
}
if (cpu < num_possible_cpus() && cpu_online(cpu)) {
stat = &per_cpu(ptcstats, cpu);
seq_printf(file,
"cpu %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ",
cpu, stat->s_requestor, cycles_2_us(stat->s_time),
- stat->s_ntarguvhub, stat->s_ntarguvhub16,
+ stat->s_ntargself, stat->s_ntarglocals,
+ stat->s_ntargremotes, stat->s_ntargcpu,
+ stat->s_ntarglocaluvhub, stat->s_ntargremoteuvhub,
+ stat->s_ntarguvhub, stat->s_ntarguvhub16);
+ seq_printf(file, "%ld %ld %ld %ld %ld ",
stat->s_ntarguvhub8, stat->s_ntarguvhub4,
stat->s_ntarguvhub2, stat->s_ntarguvhub1,
- stat->s_ntargcpu, stat->s_dtimeout);
+ stat->s_dtimeout);
seq_printf(file, "%ld %ld %ld %ld %ld %ld %ld %ld ",
stat->s_retry_messages, stat->s_retriesok,
stat->s_resets_plug, stat->s_resets_timeout,
stat->s_giveup, stat->s_stimeout,
stat->s_busy, stat->s_throttles);
+
/* destination side statistics */
seq_printf(file,
- "%lx %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld\n",
+ "%lx %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ",
uv_read_global_mmr64(uv_cpu_to_pnode(cpu),
UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE),
stat->d_requestee, cycles_2_us(stat->d_time),
stat->d_nomsg, stat->d_retries, stat->d_canceled,
stat->d_nocanceled, stat->d_resets,
stat->d_rcanceled);
+ seq_printf(file, "%ld %ld\n",
+ stat->s_bau_disabled, stat->s_bau_reenabled);
}
return 0;
}
+/*
+ * Display the tunables thru debugfs
+ */
+static ssize_t tunables_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[300];
+ int ret;
+
+ ret = snprintf(buf, 300, "%s %s %s\n%d %d %d %d %d %d %d %d %d\n",
+ "max_bau_concurrent plugged_delay plugsb4reset",
+ "timeoutsb4reset ipi_reset_limit complete_threshold",
+ "congested_response_us congested_reps congested_period",
+ max_bau_concurrent, plugged_delay, plugsb4reset,
+ timeoutsb4reset, ipi_reset_limit, complete_threshold,
+ congested_response_us, congested_reps, congested_period);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
/*
* -1: resetf the statistics
* 0: display meaning of the statistics
- * >0: maximum concurrent active descriptors per uvhub (throttle)
*/
static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user,
size_t count, loff_t *data)
long input_arg;
char optstr[64];
struct ptc_stats *stat;
- struct bau_control *bcp;
if (count == 0 || count > sizeof(optstr))
return -EINVAL;
"reset: number of ipi-style reset requests processed\n");
printk(KERN_DEBUG
"rcan: number messages canceled by reset requests\n");
+ printk(KERN_DEBUG
+ "disable: number times use of the BAU was disabled\n");
+ printk(KERN_DEBUG
+ "enable: number times use of the BAU was re-enabled\n");
} else if (input_arg == -1) {
for_each_present_cpu(cpu) {
stat = &per_cpu(ptcstats, cpu);
memset(stat, 0, sizeof(struct ptc_stats));
}
- } else {
- uv_bau_max_concurrent = input_arg;
- bcp = &per_cpu(bau_control, smp_processor_id());
- if (uv_bau_max_concurrent < 1 ||
- uv_bau_max_concurrent > bcp->cpus_in_uvhub) {
- printk(KERN_DEBUG
- "Error: BAU max concurrent %d; %d is invalid\n",
- bcp->max_concurrent, uv_bau_max_concurrent);
- return -EINVAL;
- }
- printk(KERN_DEBUG "Set BAU max concurrent:%d\n",
- uv_bau_max_concurrent);
- for_each_present_cpu(cpu) {
- bcp = &per_cpu(bau_control, cpu);
- bcp->max_concurrent = uv_bau_max_concurrent;
+ }
+
+ return count;
+}
+
+static int local_atoi(const char *name)
+{
+ int val = 0;
+
+ for (;; name++) {
+ switch (*name) {
+ case '0' ... '9':
+ val = 10*val+(*name-'0');
+ break;
+ default:
+ return val;
}
}
+}
+
+/*
+ * set the tunables
+ * 0 values reset them to defaults
+ */
+static ssize_t tunables_write(struct file *file, const char __user *user,
+ size_t count, loff_t *data)
+{
+ int cpu;
+ int cnt = 0;
+ int val;
+ char *p;
+ char *q;
+ char instr[64];
+ struct bau_control *bcp;
+
+ if (count == 0 || count > sizeof(instr)-1)
+ return -EINVAL;
+ if (copy_from_user(instr, user, count))
+ return -EFAULT;
+ instr[count] = '\0';
+ /* count the fields */
+ p = instr + strspn(instr, WHITESPACE);
+ q = p;
+ for (; *p; p = q + strspn(q, WHITESPACE)) {
+ q = p + strcspn(p, WHITESPACE);
+ cnt++;
+ if (q == p)
+ break;
+ }
+ if (cnt != 9) {
+ printk(KERN_INFO "bau tunable error: should be 9 numbers\n");
+ return -EINVAL;
+ }
+
+ p = instr + strspn(instr, WHITESPACE);
+ q = p;
+ for (cnt = 0; *p; p = q + strspn(q, WHITESPACE), cnt++) {
+ q = p + strcspn(p, WHITESPACE);
+ val = local_atoi(p);
+ switch (cnt) {
+ case 0:
+ if (val == 0) {
+ max_bau_concurrent = MAX_BAU_CONCURRENT;
+ max_bau_concurrent_constant =
+ MAX_BAU_CONCURRENT;
+ continue;
+ }
+ bcp = &per_cpu(bau_control, smp_processor_id());
+ if (val < 1 || val > bcp->cpus_in_uvhub) {
+ printk(KERN_DEBUG
+ "Error: BAU max concurrent %d is invalid\n",
+ val);
+ return -EINVAL;
+ }
+ max_bau_concurrent = val;
+ max_bau_concurrent_constant = val;
+ continue;
+ case 1:
+ if (val == 0)
+ plugged_delay = PLUGGED_DELAY;
+ else
+ plugged_delay = val;
+ continue;
+ case 2:
+ if (val == 0)
+ plugsb4reset = PLUGSB4RESET;
+ else
+ plugsb4reset = val;
+ continue;
+ case 3:
+ if (val == 0)
+ timeoutsb4reset = TIMEOUTSB4RESET;
+ else
+ timeoutsb4reset = val;
+ continue;
+ case 4:
+ if (val == 0)
+ ipi_reset_limit = IPI_RESET_LIMIT;
+ else
+ ipi_reset_limit = val;
+ continue;
+ case 5:
+ if (val == 0)
+ complete_threshold = COMPLETE_THRESHOLD;
+ else
+ complete_threshold = val;
+ continue;
+ case 6:
+ if (val == 0)
+ congested_response_us = CONGESTED_RESPONSE_US;
+ else
+ congested_response_us = val;
+ continue;
+ case 7:
+ if (val == 0)
+ congested_reps = CONGESTED_REPS;
+ else
+ congested_reps = val;
+ continue;
+ case 8:
+ if (val == 0)
+ congested_period = CONGESTED_PERIOD;
+ else
+ congested_period = val;
+ continue;
+ }
+ if (q == p)
+ break;
+ }
+ for_each_present_cpu(cpu) {
+ bcp = &per_cpu(bau_control, cpu);
+ bcp->max_bau_concurrent = max_bau_concurrent;
+ bcp->max_bau_concurrent_constant = max_bau_concurrent;
+ bcp->plugged_delay = plugged_delay;
+ bcp->plugsb4reset = plugsb4reset;
+ bcp->timeoutsb4reset = timeoutsb4reset;
+ bcp->ipi_reset_limit = ipi_reset_limit;
+ bcp->complete_threshold = complete_threshold;
+ bcp->congested_response_us = congested_response_us;
+ bcp->congested_reps = congested_reps;
+ bcp->congested_period = congested_period;
+ }
return count;
}
return seq_open(file, &uv_ptc_seq_ops);
}
+static int tunables_open(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
static const struct file_operations proc_uv_ptc_operations = {
.open = uv_ptc_proc_open,
.read = seq_read,
.release = seq_release,
};
+static const struct file_operations tunables_fops = {
+ .open = tunables_open,
+ .read = tunables_read,
+ .write = tunables_write,
+};
+
static int __init uv_ptc_init(void)
{
struct proc_dir_entry *proc_uv_ptc;
UV_PTC_BASENAME);
return -EINVAL;
}
+
+ tunables_dir = debugfs_create_dir(UV_BAU_TUNABLES_DIR, NULL);
+ if (!tunables_dir) {
+ printk(KERN_ERR "unable to create debugfs directory %s\n",
+ UV_BAU_TUNABLES_DIR);
+ return -EINVAL;
+ }
+ tunables_file = debugfs_create_file(UV_BAU_TUNABLES_FILE, 0600,
+ tunables_dir, NULL, &tunables_fops);
+ if (!tunables_file) {
+ printk(KERN_ERR "unable to create debugfs file %s\n",
+ UV_BAU_TUNABLES_FILE);
+ return -EINVAL;
+ }
return 0;
}
((apicid << 32) | vector));
}
+/*
+ * We will set BAU_MISC_CONTROL with a timeout period.
+ * But the BIOS has set UVH_AGING_PRESCALE_SEL and UVH_TRANSACTION_TIMEOUT.
+ * So the destination timeout period has be be calculated from them.
+ */
+static int
+calculate_destination_timeout(void)
+{
+ unsigned long mmr_image;
+ int mult1;
+ int mult2;
+ int index;
+ int base;
+ int ret;
+ unsigned long ts_ns;
+
+ mult1 = UV_INTD_SOFT_ACK_TIMEOUT_PERIOD & BAU_MISC_CONTROL_MULT_MASK;
+ mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL);
+ index = (mmr_image >> BAU_URGENCY_7_SHIFT) & BAU_URGENCY_7_MASK;
+ mmr_image = uv_read_local_mmr(UVH_TRANSACTION_TIMEOUT);
+ mult2 = (mmr_image >> BAU_TRANS_SHIFT) & BAU_TRANS_MASK;
+ base = timeout_base_ns[index];
+ ts_ns = base * mult1 * mult2;
+ ret = ts_ns / 1000;
+ return ret;
+}
+
/*
* initialize the bau_control structure for each cpu
*/
-static void uv_init_per_cpu(int nuvhubs)
+static void __init uv_init_per_cpu(int nuvhubs)
{
- int i, j, k;
+ int i;
int cpu;
int pnode;
int uvhub;
+ int have_hmaster;
short socket = 0;
+ unsigned short socket_mask;
+ unsigned char *uvhub_mask;
struct bau_control *bcp;
struct uvhub_desc *bdp;
struct socket_desc *sdp;
short cpu_number[16];
};
struct uvhub_desc {
- short num_sockets;
+ unsigned short socket_mask;
short num_cpus;
short uvhub;
short pnode;
};
struct uvhub_desc *uvhub_descs;
+ timeout_us = calculate_destination_timeout();
+
uvhub_descs = (struct uvhub_desc *)
kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc));
+ uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL);
for_each_present_cpu(cpu) {
bcp = &per_cpu(bau_control, cpu);
memset(bcp, 0, sizeof(struct bau_control));
- spin_lock_init(&bcp->masks_lock);
- bcp->max_concurrent = uv_bau_max_concurrent;
pnode = uv_cpu_hub_info(cpu)->pnode;
uvhub = uv_cpu_hub_info(cpu)->numa_blade_id;
+ *(uvhub_mask + (uvhub/8)) |= (1 << (uvhub%8));
bdp = &uvhub_descs[uvhub];
bdp->num_cpus++;
bdp->uvhub = uvhub;
bdp->pnode = pnode;
- /* time interval to catch a hardware stay-busy bug */
- bcp->timeout_interval = millisec_2_cycles(3);
- /* kludge: assume uv_hub.h is constant */
- socket = (cpu_physical_id(cpu)>>5)&1;
- if (socket >= bdp->num_sockets)
- bdp->num_sockets = socket+1;
+ /* kludge: 'assuming' one node per socket, and assuming that
+ disabling a socket just leaves a gap in node numbers */
+ socket = (cpu_to_node(cpu) & 1);
+ bdp->socket_mask |= (1 << socket);
sdp = &bdp->socket[socket];
sdp->cpu_number[sdp->num_cpus] = cpu;
sdp->num_cpus++;
}
- socket = 0;
- for_each_possible_blade(uvhub) {
+ for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
+ if (!(*(uvhub_mask + (uvhub/8)) & (1 << (uvhub%8))))
+ continue;
+ have_hmaster = 0;
bdp = &uvhub_descs[uvhub];
- for (i = 0; i < bdp->num_sockets; i++) {
- sdp = &bdp->socket[i];
- for (j = 0; j < sdp->num_cpus; j++) {
- cpu = sdp->cpu_number[j];
+ socket_mask = bdp->socket_mask;
+ socket = 0;
+ while (socket_mask) {
+ if (!(socket_mask & 1))
+ goto nextsocket;
+ sdp = &bdp->socket[socket];
+ for (i = 0; i < sdp->num_cpus; i++) {
+ cpu = sdp->cpu_number[i];
bcp = &per_cpu(bau_control, cpu);
bcp->cpu = cpu;
- if (j == 0) {
+ if (i == 0) {
smaster = bcp;
- if (i == 0)
+ if (!have_hmaster) {
+ have_hmaster++;
hmaster = bcp;
+ }
}
bcp->cpus_in_uvhub = bdp->num_cpus;
bcp->cpus_in_socket = sdp->num_cpus;
bcp->socket_master = smaster;
+ bcp->uvhub = bdp->uvhub;
bcp->uvhub_master = hmaster;
- for (k = 0; k < DEST_Q_SIZE; k++)
- bcp->socket_acknowledge_count[k] = 0;
- bcp->uvhub_cpu =
- uv_cpu_hub_info(cpu)->blade_processor_id;
+ bcp->uvhub_cpu = uv_cpu_hub_info(cpu)->
+ blade_processor_id;
}
+nextsocket:
socket++;
+ socket_mask = (socket_mask >> 1);
}
}
kfree(uvhub_descs);
+ kfree(uvhub_mask);
+ for_each_present_cpu(cpu) {
+ bcp = &per_cpu(bau_control, cpu);
+ bcp->baudisabled = 0;
+ bcp->statp = &per_cpu(ptcstats, cpu);
+ /* time interval to catch a hardware stay-busy bug */
+ bcp->timeout_interval = microsec_2_cycles(2*timeout_us);
+ bcp->max_bau_concurrent = max_bau_concurrent;
+ bcp->max_bau_concurrent_constant = max_bau_concurrent;
+ bcp->plugged_delay = plugged_delay;
+ bcp->plugsb4reset = plugsb4reset;
+ bcp->timeoutsb4reset = timeoutsb4reset;
+ bcp->ipi_reset_limit = ipi_reset_limit;
+ bcp->complete_threshold = complete_threshold;
+ bcp->congested_response_us = congested_response_us;
+ bcp->congested_reps = congested_reps;
+ bcp->congested_period = congested_period;
+ }
}
/*
zalloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu),
GFP_KERNEL, cpu_to_node(cur_cpu));
- uv_bau_max_concurrent = MAX_BAU_CONCURRENT;
uv_nshift = uv_hub_info->m_val;
uv_mmask = (1UL << uv_hub_info->m_val) - 1;
nuvhubs = uv_num_possible_blades();
+ spin_lock_init(&disable_lock);
+ congested_cycles = microsec_2_cycles(congested_response_us);
uv_init_per_cpu(nuvhubs);
alloc_intr_gate(vector, uv_bau_message_intr1);
for_each_possible_blade(uvhub) {
- pnode = uv_blade_to_pnode(uvhub);
- /* INIT the bau */
- uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_ACTIVATION_CONTROL,
- ((unsigned long)1 << 63));
- mmr = 1; /* should be 1 to broadcast to both sockets */
- uv_write_global_mmr64(pnode, UVH_BAU_DATA_BROADCAST, mmr);
+ if (uv_blade_nr_possible_cpus(uvhub)) {
+ pnode = uv_blade_to_pnode(uvhub);
+ /* INIT the bau */
+ uv_write_global_mmr64(pnode,
+ UVH_LB_BAU_SB_ACTIVATION_CONTROL,
+ ((unsigned long)1 << 63));
+ mmr = 1; /* should be 1 to broadcast to both sockets */
+ uv_write_global_mmr64(pnode, UVH_BAU_DATA_BROADCAST,
+ mmr);
+ }
}
return 0;
}
core_initcall(uv_bau_init);
-core_initcall(uv_ptc_init);
+fs_initcall(uv_ptc_init);
CFI_ADJUST_CFA_OFFSET -4
.endm
-.macro BEGIN func reg
-$v = \reg
-
-ENTRY(atomic64_\func\()_386)
- CFI_STARTPROC
- LOCK $v
-
-.macro RETURN
- UNLOCK $v
+#define BEGIN(op) \
+.macro endp; \
+ CFI_ENDPROC; \
+ENDPROC(atomic64_##op##_386); \
+.purgem endp; \
+.endm; \
+ENTRY(atomic64_##op##_386); \
+ CFI_STARTPROC; \
+ LOCK v;
+
+#define ENDP endp
+
+#define RET \
+ UNLOCK v; \
ret
-.endm
-
-.macro END_
- CFI_ENDPROC
-ENDPROC(atomic64_\func\()_386)
-.purgem RETURN
-.purgem END_
-.purgem END
-.endm
-
-.macro END
-RETURN
-END_
-.endm
-.endm
-BEGIN read %ecx
- movl ($v), %eax
- movl 4($v), %edx
-END
-
-BEGIN set %esi
- movl %ebx, ($v)
- movl %ecx, 4($v)
-END
-
-BEGIN xchg %esi
- movl ($v), %eax
- movl 4($v), %edx
- movl %ebx, ($v)
- movl %ecx, 4($v)
-END
-
-BEGIN add %ecx
- addl %eax, ($v)
- adcl %edx, 4($v)
-END
-
-BEGIN add_return %ecx
- addl ($v), %eax
- adcl 4($v), %edx
- movl %eax, ($v)
- movl %edx, 4($v)
-END
-
-BEGIN sub %ecx
- subl %eax, ($v)
- sbbl %edx, 4($v)
-END
-
-BEGIN sub_return %ecx
+#define RET_ENDP \
+ RET; \
+ ENDP
+
+#define v %ecx
+BEGIN(read)
+ movl (v), %eax
+ movl 4(v), %edx
+RET_ENDP
+#undef v
+
+#define v %esi
+BEGIN(set)
+ movl %ebx, (v)
+ movl %ecx, 4(v)
+RET_ENDP
+#undef v
+
+#define v %esi
+BEGIN(xchg)
+ movl (v), %eax
+ movl 4(v), %edx
+ movl %ebx, (v)
+ movl %ecx, 4(v)
+RET_ENDP
+#undef v
+
+#define v %ecx
+BEGIN(add)
+ addl %eax, (v)
+ adcl %edx, 4(v)
+RET_ENDP
+#undef v
+
+#define v %ecx
+BEGIN(add_return)
+ addl (v), %eax
+ adcl 4(v), %edx
+ movl %eax, (v)
+ movl %edx, 4(v)
+RET_ENDP
+#undef v
+
+#define v %ecx
+BEGIN(sub)
+ subl %eax, (v)
+ sbbl %edx, 4(v)
+RET_ENDP
+#undef v
+
+#define v %ecx
+BEGIN(sub_return)
negl %edx
negl %eax
sbbl $0, %edx
- addl ($v), %eax
- adcl 4($v), %edx
- movl %eax, ($v)
- movl %edx, 4($v)
-END
-
-BEGIN inc %esi
- addl $1, ($v)
- adcl $0, 4($v)
-END
-
-BEGIN inc_return %esi
- movl ($v), %eax
- movl 4($v), %edx
+ addl (v), %eax
+ adcl 4(v), %edx
+ movl %eax, (v)
+ movl %edx, 4(v)
+RET_ENDP
+#undef v
+
+#define v %esi
+BEGIN(inc)
+ addl $1, (v)
+ adcl $0, 4(v)
+RET_ENDP
+#undef v
+
+#define v %esi
+BEGIN(inc_return)
+ movl (v), %eax
+ movl 4(v), %edx
addl $1, %eax
adcl $0, %edx
- movl %eax, ($v)
- movl %edx, 4($v)
-END
-
-BEGIN dec %esi
- subl $1, ($v)
- sbbl $0, 4($v)
-END
-
-BEGIN dec_return %esi
- movl ($v), %eax
- movl 4($v), %edx
+ movl %eax, (v)
+ movl %edx, 4(v)
+RET_ENDP
+#undef v
+
+#define v %esi
+BEGIN(dec)
+ subl $1, (v)
+ sbbl $0, 4(v)
+RET_ENDP
+#undef v
+
+#define v %esi
+BEGIN(dec_return)
+ movl (v), %eax
+ movl 4(v), %edx
subl $1, %eax
sbbl $0, %edx
- movl %eax, ($v)
- movl %edx, 4($v)
-END
+ movl %eax, (v)
+ movl %edx, 4(v)
+RET_ENDP
+#undef v
-BEGIN add_unless %ecx
+#define v %ecx
+BEGIN(add_unless)
addl %eax, %esi
adcl %edx, %edi
- addl ($v), %eax
- adcl 4($v), %edx
+ addl (v), %eax
+ adcl 4(v), %edx
cmpl %eax, %esi
je 3f
1:
- movl %eax, ($v)
- movl %edx, 4($v)
+ movl %eax, (v)
+ movl %edx, 4(v)
movl $1, %eax
2:
-RETURN
+ RET
3:
cmpl %edx, %edi
jne 1b
xorl %eax, %eax
jmp 2b
-END_
+ENDP
+#undef v
-BEGIN inc_not_zero %esi
- movl ($v), %eax
- movl 4($v), %edx
+#define v %esi
+BEGIN(inc_not_zero)
+ movl (v), %eax
+ movl 4(v), %edx
testl %eax, %eax
je 3f
1:
addl $1, %eax
adcl $0, %edx
- movl %eax, ($v)
- movl %edx, 4($v)
+ movl %eax, (v)
+ movl %edx, 4(v)
movl $1, %eax
2:
-RETURN
+ RET
3:
testl %edx, %edx
jne 1b
jmp 2b
-END_
+ENDP
+#undef v
-BEGIN dec_if_positive %esi
- movl ($v), %eax
- movl 4($v), %edx
+#define v %esi
+BEGIN(dec_if_positive)
+ movl (v), %eax
+ movl 4(v), %edx
subl $1, %eax
sbbl $0, %edx
js 1f
- movl %eax, ($v)
- movl %edx, 4($v)
+ movl %eax, (v)
+ movl %edx, 4(v)
1:
-END
+RET_ENDP
+#undef v
up_read(&mm->mmap_sem);
/* Kernel mode? Handle exceptions or die: */
- if (!(error_code & PF_USER))
+ if (!(error_code & PF_USER)) {
no_context(regs, error_code, address);
+ return;
+ }
/* User-space => ok to do another page fault: */
if (is_prefetch(regs, error_code, address))
*cpu_type = "i386/core_2";
break;
case 0x1a:
+ case 0x1e:
case 0x2e:
spec = &op_arch_perfmon_spec;
*cpu_type = "i386/core_i7";
obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
+obj-$(CONFIG_SWIOTLB_XEN) += pci-swiotlb-xen.o
pgd = (pgd_t *)xen_start_info->pt_base;
+ if (!xen_initial_domain())
+ __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+
+ __supported_pte_mask |= _PAGE_IOMAP;
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
#include <linux/highmem.h>
#include <linux/debugfs.h>
#include <linux/bug.h>
+#include <linux/vmalloc.h>
#include <linux/module.h>
#include <linux/gfp.h>
#include <asm/mmu_context.h>
#include <asm/setup.h>
#include <asm/paravirt.h>
+#include <asm/e820.h>
#include <asm/linkage.h>
+#include <asm/page.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/hypervisor.h>
+#include <xen/xen.h>
#include <xen/page.h>
#include <xen/interface/xen.h>
#include <xen/interface/hvm/hvm_op.h>
#include <xen/interface/version.h>
+#include <xen/interface/memory.h>
#include <xen/hvc-console.h>
#include "multicalls.h"
#define MMU_UPDATE_HISTO 30
+/*
+ * Protects atomic reservation decrease/increase against concurrent increases.
+ * Also protects non-atomic updates of current_pages and driver_pages, and
+ * balloon lists.
+ */
+DEFINE_SPINLOCK(xen_reservation_lock);
+
#ifdef CONFIG_XEN_DEBUG_FS
static struct {
return PagePinned(page);
}
+static bool xen_iomap_pte(pte_t pte)
+{
+ return pte_flags(pte) & _PAGE_IOMAP;
+}
+
+static void xen_set_iomap_pte(pte_t *ptep, pte_t pteval)
+{
+ struct multicall_space mcs;
+ struct mmu_update *u;
+
+ mcs = xen_mc_entry(sizeof(*u));
+ u = mcs.args;
+
+ /* ptep might be kmapped when using 32-bit HIGHPTE */
+ u->ptr = arbitrary_virt_to_machine(ptep).maddr;
+ u->val = pte_val_ma(pteval);
+
+ MULTI_mmu_update(mcs.mc, mcs.args, 1, NULL, DOMID_IO);
+
+ xen_mc_issue(PARAVIRT_LAZY_MMU);
+}
+
static void xen_extend_mmu_update(const struct mmu_update *update)
{
struct multicall_space mcs;
void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval)
{
+ if (xen_iomap_pte(pteval)) {
+ xen_set_iomap_pte(ptep, pteval);
+ goto out;
+ }
+
ADD_STATS(set_pte_at, 1);
// ADD_STATS(set_pte_at_pinned, xen_page_pinned(ptep));
ADD_STATS(set_pte_at_current, mm == current->mm);
return val;
}
+static pteval_t iomap_pte(pteval_t val)
+{
+ if (val & _PAGE_PRESENT) {
+ unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+ pteval_t flags = val & PTE_FLAGS_MASK;
+
+ /* We assume the pte frame number is a MFN, so
+ just use it as-is. */
+ val = ((pteval_t)pfn << PAGE_SHIFT) | flags;
+ }
+
+ return val;
+}
+
pteval_t xen_pte_val(pte_t pte)
{
+ if (xen_initial_domain() && (pte.pte & _PAGE_IOMAP))
+ return pte.pte;
+
return pte_mfn_to_pfn(pte.pte);
}
PV_CALLEE_SAVE_REGS_THUNK(xen_pte_val);
pte_t xen_make_pte(pteval_t pte)
{
- pte = pte_pfn_to_mfn(pte);
+ phys_addr_t addr = (pte & PTE_PFN_MASK);
+
+ /*
+ * Unprivileged domains are allowed to do IOMAPpings for
+ * PCI passthrough, but not map ISA space. The ISA
+ * mappings are just dummy local mappings to keep other
+ * parts of the kernel happy.
+ */
+ if (unlikely(pte & _PAGE_IOMAP) &&
+ (xen_initial_domain() || addr >= ISA_END_ADDRESS)) {
+ pte = iomap_pte(pte);
+ } else {
+ pte &= ~_PAGE_IOMAP;
+ pte = pte_pfn_to_mfn(pte);
+ }
+
return native_make_pte(pte);
}
PV_CALLEE_SAVE_REGS_THUNK(xen_make_pte);
void xen_set_pte(pte_t *ptep, pte_t pte)
{
+ if (xen_iomap_pte(pte)) {
+ xen_set_iomap_pte(ptep, pte);
+ return;
+ }
+
ADD_STATS(pte_update, 1);
// ADD_STATS(pte_update_pinned, xen_page_pinned(ptep));
ADD_STATS(pte_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU);
#ifdef CONFIG_X86_PAE
void xen_set_pte_atomic(pte_t *ptep, pte_t pte)
{
+ if (xen_iomap_pte(pte)) {
+ xen_set_iomap_pte(ptep, pte);
+ return;
+ }
+
set_64bit((u64 *)ptep, native_pte_val(pte));
}
read-only, and can be pinned. */
static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd)
{
- vm_unmap_aliases();
-
xen_mc_batch();
if (__xen_pgd_walk(mm, pgd, xen_pin_page, USER_LIMIT)) {
if (PagePinned(virt_to_page(mm->pgd))) {
SetPagePinned(page);
- vm_unmap_aliases();
if (!PageHighMem(page)) {
make_lowmem_page_readonly(__va(PFN_PHYS((unsigned long)pfn)));
if (level == PT_PTE && USE_SPLIT_PTLOCKS)
pte = pfn_pte(phys, prot);
break;
- default:
+ case FIX_PARAVIRT_BOOTMAP:
+ /* This is an MFN, but it isn't an IO mapping from the
+ IO domain */
pte = mfn_pte(phys, prot);
break;
+
+ default:
+ /* By default, set_fixmap is used for hardware mappings */
+ pte = mfn_pte(phys, __pgprot(pgprot_val(prot) | _PAGE_IOMAP));
+ break;
}
__native_set_fixmap(idx, pte);
x86_init.paging.pagetable_setup_start = xen_pagetable_setup_start;
x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done;
pv_mmu_ops = xen_mmu_ops;
+
+ vmap_lazy_unmap = false;
+}
+
+/* Protected by xen_reservation_lock. */
+#define MAX_CONTIG_ORDER 9 /* 2MB */
+static unsigned long discontig_frames[1<<MAX_CONTIG_ORDER];
+
+#define VOID_PTE (mfn_pte(0, __pgprot(0)))
+static void xen_zap_pfn_range(unsigned long vaddr, unsigned int order,
+ unsigned long *in_frames,
+ unsigned long *out_frames)
+{
+ int i;
+ struct multicall_space mcs;
+
+ xen_mc_batch();
+ for (i = 0; i < (1UL<<order); i++, vaddr += PAGE_SIZE) {
+ mcs = __xen_mc_entry(0);
+
+ if (in_frames)
+ in_frames[i] = virt_to_mfn(vaddr);
+
+ MULTI_update_va_mapping(mcs.mc, vaddr, VOID_PTE, 0);
+ set_phys_to_machine(virt_to_pfn(vaddr), INVALID_P2M_ENTRY);
+
+ if (out_frames)
+ out_frames[i] = virt_to_pfn(vaddr);
+ }
+ xen_mc_issue(0);
+}
+
+/*
+ * Update the pfn-to-mfn mappings for a virtual address range, either to
+ * point to an array of mfns, or contiguously from a single starting
+ * mfn.
+ */
+static void xen_remap_exchanged_ptes(unsigned long vaddr, int order,
+ unsigned long *mfns,
+ unsigned long first_mfn)
+{
+ unsigned i, limit;
+ unsigned long mfn;
+
+ xen_mc_batch();
+
+ limit = 1u << order;
+ for (i = 0; i < limit; i++, vaddr += PAGE_SIZE) {
+ struct multicall_space mcs;
+ unsigned flags;
+
+ mcs = __xen_mc_entry(0);
+ if (mfns)
+ mfn = mfns[i];
+ else
+ mfn = first_mfn + i;
+
+ if (i < (limit - 1))
+ flags = 0;
+ else {
+ if (order == 0)
+ flags = UVMF_INVLPG | UVMF_ALL;
+ else
+ flags = UVMF_TLB_FLUSH | UVMF_ALL;
+ }
+
+ MULTI_update_va_mapping(mcs.mc, vaddr,
+ mfn_pte(mfn, PAGE_KERNEL), flags);
+
+ set_phys_to_machine(virt_to_pfn(vaddr), mfn);
+ }
+
+ xen_mc_issue(0);
+}
+
+/*
+ * Perform the hypercall to exchange a region of our pfns to point to
+ * memory with the required contiguous alignment. Takes the pfns as
+ * input, and populates mfns as output.
+ *
+ * Returns a success code indicating whether the hypervisor was able to
+ * satisfy the request or not.
+ */
+static int xen_exchange_memory(unsigned long extents_in, unsigned int order_in,
+ unsigned long *pfns_in,
+ unsigned long extents_out,
+ unsigned int order_out,
+ unsigned long *mfns_out,
+ unsigned int address_bits)
+{
+ long rc;
+ int success;
+
+ struct xen_memory_exchange exchange = {
+ .in = {
+ .nr_extents = extents_in,
+ .extent_order = order_in,
+ .extent_start = pfns_in,
+ .domid = DOMID_SELF
+ },
+ .out = {
+ .nr_extents = extents_out,
+ .extent_order = order_out,
+ .extent_start = mfns_out,
+ .address_bits = address_bits,
+ .domid = DOMID_SELF
+ }
+ };
+
+ BUG_ON(extents_in << order_in != extents_out << order_out);
+
+ rc = HYPERVISOR_memory_op(XENMEM_exchange, &exchange);
+ success = (exchange.nr_exchanged == extents_in);
+
+ BUG_ON(!success && ((exchange.nr_exchanged != 0) || (rc == 0)));
+ BUG_ON(success && (rc != 0));
+
+ return success;
+}
+
+int xen_create_contiguous_region(unsigned long vstart, unsigned int order,
+ unsigned int address_bits)
+{
+ unsigned long *in_frames = discontig_frames, out_frame;
+ unsigned long flags;
+ int success;
+
+ /*
+ * Currently an auto-translated guest will not perform I/O, nor will
+ * it require PAE page directories below 4GB. Therefore any calls to
+ * this function are redundant and can be ignored.
+ */
+
+ if (xen_feature(XENFEAT_auto_translated_physmap))
+ return 0;
+
+ if (unlikely(order > MAX_CONTIG_ORDER))
+ return -ENOMEM;
+
+ memset((void *) vstart, 0, PAGE_SIZE << order);
+
+ spin_lock_irqsave(&xen_reservation_lock, flags);
+
+ /* 1. Zap current PTEs, remembering MFNs. */
+ xen_zap_pfn_range(vstart, order, in_frames, NULL);
+
+ /* 2. Get a new contiguous memory extent. */
+ out_frame = virt_to_pfn(vstart);
+ success = xen_exchange_memory(1UL << order, 0, in_frames,
+ 1, order, &out_frame,
+ address_bits);
+
+ /* 3. Map the new extent in place of old pages. */
+ if (success)
+ xen_remap_exchanged_ptes(vstart, order, NULL, out_frame);
+ else
+ xen_remap_exchanged_ptes(vstart, order, in_frames, 0);
+
+ spin_unlock_irqrestore(&xen_reservation_lock, flags);
+
+ return success ? 0 : -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(xen_create_contiguous_region);
+
+void xen_destroy_contiguous_region(unsigned long vstart, unsigned int order)
+{
+ unsigned long *out_frames = discontig_frames, in_frame;
+ unsigned long flags;
+ int success;
+
+ if (xen_feature(XENFEAT_auto_translated_physmap))
+ return;
+
+ if (unlikely(order > MAX_CONTIG_ORDER))
+ return;
+
+ memset((void *) vstart, 0, PAGE_SIZE << order);
+
+ spin_lock_irqsave(&xen_reservation_lock, flags);
+
+ /* 1. Find start MFN of contiguous extent. */
+ in_frame = virt_to_mfn(vstart);
+
+ /* 2. Zap current PTEs. */
+ xen_zap_pfn_range(vstart, order, NULL, out_frames);
+
+ /* 3. Do the exchange for non-contiguous MFNs. */
+ success = xen_exchange_memory(1, order, &in_frame, 1UL << order,
+ 0, out_frames, 0);
+
+ /* 4. Map new pages in place of old pages. */
+ if (success)
+ xen_remap_exchanged_ptes(vstart, order, out_frames, 0);
+ else
+ xen_remap_exchanged_ptes(vstart, order, NULL, in_frame);
+
+ spin_unlock_irqrestore(&xen_reservation_lock, flags);
}
+EXPORT_SYMBOL_GPL(xen_destroy_contiguous_region);
#ifdef CONFIG_XEN_PVHVM
static void xen_hvm_exit_mmap(struct mm_struct *mm)
--- /dev/null
+/* Glue code to lib/swiotlb-xen.c */
+
+#include <linux/dma-mapping.h>
+#include <xen/swiotlb-xen.h>
+
+#include <asm/xen/hypervisor.h>
+#include <xen/xen.h>
+
+int xen_swiotlb __read_mostly;
+
+static struct dma_map_ops xen_swiotlb_dma_ops = {
+ .mapping_error = xen_swiotlb_dma_mapping_error,
+ .alloc_coherent = xen_swiotlb_alloc_coherent,
+ .free_coherent = xen_swiotlb_free_coherent,
+ .sync_single_for_cpu = xen_swiotlb_sync_single_for_cpu,
+ .sync_single_for_device = xen_swiotlb_sync_single_for_device,
+ .sync_sg_for_cpu = xen_swiotlb_sync_sg_for_cpu,
+ .sync_sg_for_device = xen_swiotlb_sync_sg_for_device,
+ .map_sg = xen_swiotlb_map_sg_attrs,
+ .unmap_sg = xen_swiotlb_unmap_sg_attrs,
+ .map_page = xen_swiotlb_map_page,
+ .unmap_page = xen_swiotlb_unmap_page,
+ .dma_supported = xen_swiotlb_dma_supported,
+};
+
+/*
+ * pci_xen_swiotlb_detect - set xen_swiotlb to 1 if necessary
+ *
+ * This returns non-zero if we are forced to use xen_swiotlb (by the boot
+ * option).
+ */
+int __init pci_xen_swiotlb_detect(void)
+{
+
+ /* If running as PV guest, either iommu=soft, or swiotlb=force will
+ * activate this IOMMU. If running as PV privileged, activate it
+ * irregardlesss.
+ */
+ if ((xen_initial_domain() || swiotlb || swiotlb_force) &&
+ (xen_pv_domain()))
+ xen_swiotlb = 1;
+
+ /* If we are running under Xen, we MUST disable the native SWIOTLB.
+ * Don't worry about swiotlb_force flag activating the native, as
+ * the 'swiotlb' flag is the only one turning it on. */
+ if (xen_pv_domain())
+ swiotlb = 0;
+
+ return xen_swiotlb;
+}
+
+void __init pci_xen_swiotlb_init(void)
+{
+ if (xen_swiotlb) {
+ xen_swiotlb_init(1);
+ dma_ops = &xen_swiotlb_dma_ops;
+ }
+}
# define CACHE_WAY_SIZE ICACHE_WAY_SIZE
#endif
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#endif /* _XTENSA_CACHE_H */
return 0;
}
-static inline int
-dma_get_cache_alignment(void)
-{
- return L1_CACHE_BYTES;
-}
-
-#define dma_is_consistent(d, h) (1)
-
static inline void
dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
+# define TIOCPKT_IOCTL 64
#define TIOCNOTTY _IO('T', 34)
#define TCSETSF2 _IOW('T', 45, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG _IO('T', 83)
#define TIOCSERGWILD _IOR('T', 84, int)
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (~0UL)
-
#endif /* _XTENSA_SCATTERLIST_H */
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
*/
asmlinkage
-long xtensa_execve(char __user *name, char __user * __user *argv,
- char __user * __user *envp,
+long xtensa_execve(const char __user *name,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp,
long a3, long a4, long a5,
struct pt_regs *regs)
{
* blk_queue_ordered - does this queue support ordered writes
* @q: the request queue
* @ordered: one of QUEUE_ORDERED_*
- * @prepare_flush_fn: rq setup helper for cache flush ordered writes
*
* Description:
* For journalled file systems, doing ordered writes on a commit
* feature should call this function and indicate so.
*
**/
-int blk_queue_ordered(struct request_queue *q, unsigned ordered,
- prepare_flush_fn *prepare_flush_fn)
+int blk_queue_ordered(struct request_queue *q, unsigned ordered)
{
- if (!prepare_flush_fn && (ordered & (QUEUE_ORDERED_DO_PREFLUSH |
- QUEUE_ORDERED_DO_POSTFLUSH))) {
- printk(KERN_ERR "%s: prepare_flush_fn required\n", __func__);
- return -EINVAL;
- }
-
if (ordered != QUEUE_ORDERED_NONE &&
ordered != QUEUE_ORDERED_DRAIN &&
ordered != QUEUE_ORDERED_DRAIN_FLUSH &&
q->ordered = ordered;
q->next_ordered = ordered;
- q->prepare_flush_fn = prepare_flush_fn;
return 0;
}
*
* http://thread.gmane.org/gmane.linux.kernel/537473
*/
- if (!blk_fs_request(rq))
+ if (rq->cmd_type != REQ_TYPE_FS)
return QUEUE_ORDSEQ_DRAIN;
if ((rq->cmd_flags & REQ_ORDERED_COLOR) ==
}
blk_rq_init(q, rq);
- rq->cmd_flags = REQ_HARDBARRIER;
- rq->rq_disk = q->bar_rq.rq_disk;
+ rq->cmd_type = REQ_TYPE_FS;
+ rq->cmd_flags = REQ_HARDBARRIER | REQ_FLUSH;
+ rq->rq_disk = q->orig_bar_rq->rq_disk;
rq->end_io = end_io;
- q->prepare_flush_fn(q, rq);
elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
}
/* initialize proxy request and queue it */
blk_rq_init(q, rq);
if (bio_data_dir(q->orig_bar_rq->bio) == WRITE)
- rq->cmd_flags |= REQ_RW;
+ rq->cmd_flags |= REQ_WRITE;
if (q->ordered & QUEUE_ORDERED_DO_FUA)
rq->cmd_flags |= REQ_FUA;
init_request_from_bio(rq, q->orig_bar_rq->bio);
bool blk_do_ordered(struct request_queue *q, struct request **rqp)
{
struct request *rq = *rqp;
- const int is_barrier = blk_fs_request(rq) && blk_barrier_rq(rq);
+ const int is_barrier = rq->cmd_type == REQ_TYPE_FS &&
+ (rq->cmd_flags & REQ_HARDBARRIER);
if (!q->ordseq) {
if (!is_barrier)
*/
/* Special requests are not subject to ordering rules. */
- if (!blk_fs_request(rq) &&
+ if (rq->cmd_type != REQ_TYPE_FS &&
rq != &q->pre_flush_rq && rq != &q->post_flush_rq)
return true;
if (!q)
return -ENXIO;
+ /*
+ * some block devices may not have their queue correctly set up here
+ * (e.g. loop device without a backing file) and so issuing a flush
+ * here will panic. Ensure there is a request function before issuing
+ * the barrier.
+ */
+ if (!q->make_request_fn)
+ return -ENXIO;
+
bio = bio_alloc(gfp_mask, 0);
bio->bi_end_io = bio_end_empty_barrier;
bio->bi_bdev = bdev;
printk(KERN_INFO " bio %p, biotail %p, buffer %p, len %u\n",
rq->bio, rq->biotail, rq->buffer, blk_rq_bytes(rq));
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
printk(KERN_INFO " cdb: ");
for (bit = 0; bit < BLK_MAX_CDB; bit++)
printk("%02x ", rq->cmd[bit]);
q->request_fn = rfn;
q->prep_rq_fn = NULL;
+ q->unprep_rq_fn = NULL;
q->unplug_fn = generic_unplug_device;
q->queue_flags = QUEUE_FLAG_DEFAULT;
q->queue_lock = lock;
}
EXPORT_SYMBOL(blk_put_request);
+/**
+ * blk_add_request_payload - add a payload to a request
+ * @rq: request to update
+ * @page: page backing the payload
+ * @len: length of the payload.
+ *
+ * This allows to later add a payload to an already submitted request by
+ * a block driver. The driver needs to take care of freeing the payload
+ * itself.
+ *
+ * Note that this is a quite horrible hack and nothing but handling of
+ * discard requests should ever use it.
+ */
+void blk_add_request_payload(struct request *rq, struct page *page,
+ unsigned int len)
+{
+ struct bio *bio = rq->bio;
+
+ bio->bi_io_vec->bv_page = page;
+ bio->bi_io_vec->bv_offset = 0;
+ bio->bi_io_vec->bv_len = len;
+
+ bio->bi_size = len;
+ bio->bi_vcnt = 1;
+ bio->bi_phys_segments = 1;
+
+ rq->__data_len = rq->resid_len = len;
+ rq->nr_phys_segments = 1;
+ rq->buffer = bio_data(bio);
+}
+EXPORT_SYMBOL_GPL(blk_add_request_payload);
+
void init_request_from_bio(struct request *req, struct bio *bio)
{
req->cpu = bio->bi_comp_cpu;
req->cmd_type = REQ_TYPE_FS;
- /*
- * Inherit FAILFAST from bio (for read-ahead, and explicit
- * FAILFAST). FAILFAST flags are identical for req and bio.
- */
- if (bio_rw_flagged(bio, BIO_RW_AHEAD))
+ req->cmd_flags |= bio->bi_rw & REQ_COMMON_MASK;
+ if (bio->bi_rw & REQ_RAHEAD)
req->cmd_flags |= REQ_FAILFAST_MASK;
- else
- req->cmd_flags |= bio->bi_rw & REQ_FAILFAST_MASK;
-
- if (bio_rw_flagged(bio, BIO_RW_DISCARD))
- req->cmd_flags |= REQ_DISCARD;
- if (bio_rw_flagged(bio, BIO_RW_BARRIER))
- req->cmd_flags |= REQ_HARDBARRIER;
- if (bio_rw_flagged(bio, BIO_RW_SYNCIO))
- req->cmd_flags |= REQ_RW_SYNC;
- if (bio_rw_flagged(bio, BIO_RW_META))
- req->cmd_flags |= REQ_RW_META;
- if (bio_rw_flagged(bio, BIO_RW_NOIDLE))
- req->cmd_flags |= REQ_NOIDLE;
req->errors = 0;
req->__sector = bio->bi_sector;
int el_ret;
unsigned int bytes = bio->bi_size;
const unsigned short prio = bio_prio(bio);
- const bool sync = bio_rw_flagged(bio, BIO_RW_SYNCIO);
- const bool unplug = bio_rw_flagged(bio, BIO_RW_UNPLUG);
+ const bool sync = (bio->bi_rw & REQ_SYNC);
+ const bool unplug = (bio->bi_rw & REQ_UNPLUG);
const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK;
int rw_flags;
- if (bio_rw_flagged(bio, BIO_RW_BARRIER) &&
+ if ((bio->bi_rw & REQ_HARDBARRIER) &&
(q->next_ordered == QUEUE_ORDERED_NONE)) {
bio_endio(bio, -EOPNOTSUPP);
return 0;
spin_lock_irq(q->queue_lock);
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER)) || elv_queue_empty(q))
+ if (unlikely((bio->bi_rw & REQ_HARDBARRIER)) || elv_queue_empty(q))
goto get_rq;
el_ret = elv_merge(q, &req, bio);
*/
rw_flags = bio_data_dir(bio);
if (sync)
- rw_flags |= REQ_RW_SYNC;
+ rw_flags |= REQ_SYNC;
/*
* Grab a free request. This is might sleep but can not fail.
goto end_io;
}
- if (unlikely(!bio_rw_flagged(bio, BIO_RW_DISCARD) &&
+ if (unlikely(!(bio->bi_rw & REQ_DISCARD) &&
nr_sectors > queue_max_hw_sectors(q))) {
printk(KERN_ERR "bio too big device %s (%u > %u)\n",
bdevname(bio->bi_bdev, b),
if (bio_check_eod(bio, nr_sectors))
goto end_io;
- if (bio_rw_flagged(bio, BIO_RW_DISCARD) &&
- !blk_queue_discard(q)) {
+ if ((bio->bi_rw & REQ_DISCARD) &&
+ (!blk_queue_discard(q) ||
+ ((bio->bi_rw & REQ_SECURE) &&
+ !blk_queue_secdiscard(q)))) {
err = -EOPNOTSUPP;
goto end_io;
}
* If it's a regular read/write or a barrier with data attached,
* go through the normal accounting stuff before submission.
*/
- if (bio_has_data(bio) && !(rw & (1 << BIO_RW_DISCARD))) {
+ if (bio_has_data(bio) && !(rw & REQ_DISCARD)) {
if (rw & WRITE) {
count_vm_events(PGPGOUT, count);
} else {
*/
int blk_rq_check_limits(struct request_queue *q, struct request *rq)
{
+ if (rq->cmd_flags & REQ_DISCARD)
+ return 0;
+
if (blk_rq_sectors(rq) > queue_max_sectors(q) ||
blk_rq_bytes(rq) > queue_max_hw_sectors(q) << 9) {
printk(KERN_ERR "%s: over max size limit.\n", __func__);
* sees this request (possibly after
* requeueing). Notify IO scheduler.
*/
- if (blk_sorted_rq(rq))
+ if (rq->cmd_flags & REQ_SORTED)
elv_activate_rq(q, rq);
/*
* TODO: tj: This is too subtle. It would be better to let
* low level drivers do what they see fit.
*/
- if (blk_fs_request(req))
+ if (req->cmd_type == REQ_TYPE_FS)
req->errors = 0;
- if (error && (blk_fs_request(req) && !(req->cmd_flags & REQ_QUIET))) {
+ if (error && req->cmd_type == REQ_TYPE_FS &&
+ !(req->cmd_flags & REQ_QUIET)) {
printk(KERN_ERR "end_request: I/O error, dev %s, sector %llu\n",
req->rq_disk ? req->rq_disk->disk_name : "?",
(unsigned long long)blk_rq_pos(req));
req->buffer = bio_data(req->bio);
/* update sector only for requests with clear definition of sector */
- if (blk_fs_request(req) || blk_discard_rq(req))
+ if (req->cmd_type == REQ_TYPE_FS || (req->cmd_flags & REQ_DISCARD))
req->__sector += total_bytes >> 9;
/* mixed attributes always follow the first bio */
blk_update_request(rq->next_rq, error, bidi_bytes))
return true;
- add_disk_randomness(rq->rq_disk);
+ if (blk_queue_add_random(rq->q))
+ add_disk_randomness(rq->rq_disk);
return false;
}
+/**
+ * blk_unprep_request - unprepare a request
+ * @req: the request
+ *
+ * This function makes a request ready for complete resubmission (or
+ * completion). It happens only after all error handling is complete,
+ * so represents the appropriate moment to deallocate any resources
+ * that were allocated to the request in the prep_rq_fn. The queue
+ * lock is held when calling this.
+ */
+void blk_unprep_request(struct request *req)
+{
+ struct request_queue *q = req->q;
+
+ req->cmd_flags &= ~REQ_DONTPREP;
+ if (q->unprep_rq_fn)
+ q->unprep_rq_fn(q, req);
+}
+EXPORT_SYMBOL_GPL(blk_unprep_request);
+
/*
* queue lock must be held
*/
BUG_ON(blk_queued_rq(req));
- if (unlikely(laptop_mode) && blk_fs_request(req))
+ if (unlikely(laptop_mode) && req->cmd_type == REQ_TYPE_FS)
laptop_io_completion(&req->q->backing_dev_info);
blk_delete_timer(req);
+ if (req->cmd_flags & REQ_DONTPREP)
+ blk_unprep_request(req);
+
+
blk_account_io_done(req);
if (req->end_io)
struct bio *bio)
{
/* Bit 0 (R/W) is identical in rq->cmd_flags and bio->bi_rw */
- rq->cmd_flags |= bio->bi_rw & REQ_RW;
+ rq->cmd_flags |= bio->bi_rw & REQ_WRITE;
if (bio_has_data(bio)) {
rq->nr_phys_segments = bio_phys_segments(q, bio);
{
dst->cpu = src->cpu;
dst->cmd_flags = (rq_data_dir(src) | REQ_NOMERGE);
+ if (src->cmd_flags & REQ_DISCARD)
+ dst->cmd_flags |= REQ_DISCARD;
dst->cmd_type = src->cmd_type;
dst->__sector = blk_rq_pos(src);
dst->__data_len = blk_rq_bytes(src);
__elv_add_request(q, rq, where, 1);
__generic_unplug_device(q);
/* the queue is stopped so it won't be plugged+unplugged */
- if (blk_pm_resume_request(rq))
+ if (rq->cmd_type == REQ_TYPE_PM_RESUME)
q->request_fn(q);
spin_unlock_irq(q->queue_lock);
}
if (bio->bi_private)
complete(bio->bi_private);
- __free_page(bio_page(bio));
bio_put(bio);
}
struct request_queue *q = bdev_get_queue(bdev);
int type = flags & BLKDEV_IFL_BARRIER ?
DISCARD_BARRIER : DISCARD_NOBARRIER;
+ unsigned int max_discard_sectors;
struct bio *bio;
- struct page *page;
int ret = 0;
if (!q)
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
- while (nr_sects && !ret) {
- unsigned int sector_size = q->limits.logical_block_size;
- unsigned int max_discard_sectors =
- min(q->limits.max_discard_sectors, UINT_MAX >> 9);
+ /*
+ * Ensure that max_discard_sectors is of the proper
+ * granularity
+ */
+ max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9);
+ if (q->limits.discard_granularity) {
+ unsigned int disc_sects = q->limits.discard_granularity >> 9;
+
+ max_discard_sectors &= ~(disc_sects - 1);
+ }
+
+ if (flags & BLKDEV_IFL_SECURE) {
+ if (!blk_queue_secdiscard(q))
+ return -EOPNOTSUPP;
+ type |= DISCARD_SECURE;
+ }
+ while (nr_sects && !ret) {
bio = bio_alloc(gfp_mask, 1);
- if (!bio)
- goto out;
+ if (!bio) {
+ ret = -ENOMEM;
+ break;
+ }
+
bio->bi_sector = sector;
bio->bi_end_io = blkdev_discard_end_io;
bio->bi_bdev = bdev;
if (flags & BLKDEV_IFL_WAIT)
bio->bi_private = &wait;
- /*
- * Add a zeroed one-sector payload as that's what
- * our current implementations need. If we'll ever need
- * more the interface will need revisiting.
- */
- page = alloc_page(gfp_mask | __GFP_ZERO);
- if (!page)
- goto out_free_bio;
- if (bio_add_pc_page(q, bio, page, sector_size, 0) < sector_size)
- goto out_free_page;
-
- /*
- * And override the bio size - the way discard works we
- * touch many more blocks on disk than the actual payload
- * length.
- */
if (nr_sects > max_discard_sectors) {
bio->bi_size = max_discard_sectors << 9;
nr_sects -= max_discard_sectors;
ret = -EIO;
bio_put(bio);
}
+
return ret;
-out_free_page:
- __free_page(page);
-out_free_bio:
- bio_put(bio);
-out:
- return -ENOMEM;
}
EXPORT_SYMBOL(blkdev_issue_discard);
int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, unsigned long flags)
{
- int ret = 0;
+ int ret;
struct bio *bio;
struct bio_batch bb;
unsigned int sz, issued = 0;
return ret;
}
submit:
+ ret = 0;
while (nr_sects != 0) {
bio = bio_alloc(gfp_mask,
min(nr_sects, (sector_t)BIO_MAX_PAGES));
- if (!bio)
+ if (!bio) {
+ ret = -ENOMEM;
break;
+ }
bio->bi_sector = sector;
bio->bi_bdev = bdev;
if (ret < (sz << 9))
break;
}
+ ret = 0;
issued++;
submit_bio(WRITE, bio);
}
return PTR_ERR(bio);
if (rq_data_dir(rq) == WRITE)
- bio->bi_rw |= (1 << BIO_RW);
+ bio->bi_rw |= (1 << REQ_WRITE);
if (do_copy)
rq->cmd_flags |= REQ_COPY_USER;
static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
struct bio *bio)
{
- unsigned int phys_size;
struct bio_vec *bv, *bvprv = NULL;
int cluster, i, high, highprv = 1;
unsigned int seg_size, nr_phys_segs;
fbio = bio;
cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
seg_size = 0;
- phys_size = nr_phys_segs = 0;
+ nr_phys_segs = 0;
for_each_bio(bio) {
bio_for_each_segment(bv, bio, i) {
/*
}
if (q->dma_drain_size && q->dma_drain_needed(rq)) {
- if (rq->cmd_flags & REQ_RW)
+ if (rq->cmd_flags & REQ_WRITE)
memset(q->dma_drain_buffer, 0, q->dma_drain_size);
sg->page_link &= ~0x02;
{
unsigned short max_sectors;
- if (unlikely(blk_pc_request(req)))
+ if (unlikely(req->cmd_type == REQ_TYPE_BLOCK_PC))
max_sectors = queue_max_hw_sectors(q);
else
max_sectors = queue_max_sectors(q);
{
unsigned short max_sectors;
- if (unlikely(blk_pc_request(req)))
+ if (unlikely(req->cmd_type == REQ_TYPE_BLOCK_PC))
max_sectors = queue_max_hw_sectors(q);
else
max_sectors = queue_max_sectors(q);
}
EXPORT_SYMBOL(blk_queue_prep_rq);
+/**
+ * blk_queue_unprep_rq - set an unprepare_request function for queue
+ * @q: queue
+ * @ufn: unprepare_request function
+ *
+ * It's possible for a queue to register an unprepare_request callback
+ * which is invoked before the request is finally completed. The goal
+ * of the function is to deallocate any data that was allocated in the
+ * prepare_request callback.
+ *
+ */
+void blk_queue_unprep_rq(struct request_queue *q, unprep_rq_fn *ufn)
+{
+ q->unprep_rq_fn = ufn;
+}
+EXPORT_SYMBOL(blk_queue_unprep_rq);
+
/**
* blk_queue_merge_bvec - set a merge_bvec function for queue
* @q: queue
return queue_var_show(max_hw_sectors_kb, (page));
}
-static ssize_t queue_nonrot_show(struct request_queue *q, char *page)
-{
- return queue_var_show(!blk_queue_nonrot(q), page);
+#define QUEUE_SYSFS_BIT_FNS(name, flag, neg) \
+static ssize_t \
+queue_show_##name(struct request_queue *q, char *page) \
+{ \
+ int bit; \
+ bit = test_bit(QUEUE_FLAG_##flag, &q->queue_flags); \
+ return queue_var_show(neg ? !bit : bit, page); \
+} \
+static ssize_t \
+queue_store_##name(struct request_queue *q, const char *page, size_t count) \
+{ \
+ unsigned long val; \
+ ssize_t ret; \
+ ret = queue_var_store(&val, page, count); \
+ if (neg) \
+ val = !val; \
+ \
+ spin_lock_irq(q->queue_lock); \
+ if (val) \
+ queue_flag_set(QUEUE_FLAG_##flag, q); \
+ else \
+ queue_flag_clear(QUEUE_FLAG_##flag, q); \
+ spin_unlock_irq(q->queue_lock); \
+ return ret; \
}
-static ssize_t queue_nonrot_store(struct request_queue *q, const char *page,
- size_t count)
-{
- unsigned long nm;
- ssize_t ret = queue_var_store(&nm, page, count);
-
- spin_lock_irq(q->queue_lock);
- if (nm)
- queue_flag_clear(QUEUE_FLAG_NONROT, q);
- else
- queue_flag_set(QUEUE_FLAG_NONROT, q);
- spin_unlock_irq(q->queue_lock);
-
- return ret;
-}
+QUEUE_SYSFS_BIT_FNS(nonrot, NONROT, 1);
+QUEUE_SYSFS_BIT_FNS(random, ADD_RANDOM, 0);
+QUEUE_SYSFS_BIT_FNS(iostats, IO_STAT, 0);
+#undef QUEUE_SYSFS_BIT_FNS
static ssize_t queue_nomerges_show(struct request_queue *q, char *page)
{
return ret;
}
-static ssize_t queue_iostats_show(struct request_queue *q, char *page)
-{
- return queue_var_show(blk_queue_io_stat(q), page);
-}
-
-static ssize_t queue_iostats_store(struct request_queue *q, const char *page,
- size_t count)
-{
- unsigned long stats;
- ssize_t ret = queue_var_store(&stats, page, count);
-
- spin_lock_irq(q->queue_lock);
- if (stats)
- queue_flag_set(QUEUE_FLAG_IO_STAT, q);
- else
- queue_flag_clear(QUEUE_FLAG_IO_STAT, q);
- spin_unlock_irq(q->queue_lock);
-
- return ret;
-}
-
static struct queue_sysfs_entry queue_requests_entry = {
.attr = {.name = "nr_requests", .mode = S_IRUGO | S_IWUSR },
.show = queue_requests_show,
static struct queue_sysfs_entry queue_nonrot_entry = {
.attr = {.name = "rotational", .mode = S_IRUGO | S_IWUSR },
- .show = queue_nonrot_show,
- .store = queue_nonrot_store,
+ .show = queue_show_nonrot,
+ .store = queue_store_nonrot,
};
static struct queue_sysfs_entry queue_nomerges_entry = {
static struct queue_sysfs_entry queue_iostats_entry = {
.attr = {.name = "iostats", .mode = S_IRUGO | S_IWUSR },
- .show = queue_iostats_show,
- .store = queue_iostats_store,
+ .show = queue_show_iostats,
+ .store = queue_store_iostats,
+};
+
+static struct queue_sysfs_entry queue_random_entry = {
+ .attr = {.name = "add_random", .mode = S_IRUGO | S_IWUSR },
+ .show = queue_show_random,
+ .store = queue_store_random,
};
static struct attribute *default_attrs[] = {
&queue_nomerges_entry.attr,
&queue_rq_affinity_entry.attr,
&queue_iostats_entry.attr,
+ &queue_random_entry.attr,
NULL,
};
*/
static inline int blk_do_io_stat(struct request *rq)
{
- return rq->rq_disk && blk_rq_io_stat(rq) &&
- (blk_fs_request(rq) || blk_discard_rq(rq));
+ return rq->rq_disk &&
+ (rq->cmd_flags & REQ_IO_STAT) &&
+ (rq->cmd_type == REQ_TYPE_FS ||
+ (rq->cmd_flags & REQ_DISCARD));
}
#endif
*/
static inline bool cfq_bio_sync(struct bio *bio)
{
- return bio_data_dir(bio) == READ || bio_rw_flagged(bio, BIO_RW_SYNCIO);
+ return bio_data_dir(bio) == READ || (bio->bi_rw & REQ_SYNC);
}
/*
return rq1;
else if (rq_is_sync(rq2) && !rq_is_sync(rq1))
return rq2;
- if (rq_is_meta(rq1) && !rq_is_meta(rq2))
+ if ((rq1->cmd_flags & REQ_META) && !(rq2->cmd_flags & REQ_META))
return rq1;
- else if (rq_is_meta(rq2) && !rq_is_meta(rq1))
+ else if ((rq2->cmd_flags & REQ_META) &&
+ !(rq1->cmd_flags & REQ_META))
return rq2;
s1 = blk_rq_pos(rq1);
cfqq->cfqd->rq_queued--;
cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
rq_data_dir(rq), rq_is_sync(rq));
- if (rq_is_meta(rq)) {
+ if (rq->cmd_flags & REQ_META) {
WARN_ON(!cfqq->meta_pending);
cfqq->meta_pending--;
}
* So both queues are sync. Let the new request get disk time if
* it's a metadata request and the current queue is doing regular IO.
*/
- if (rq_is_meta(rq) && !cfqq->meta_pending)
+ if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending)
return true;
/*
struct cfq_io_context *cic = RQ_CIC(rq);
cfqd->rq_queued++;
- if (rq_is_meta(rq))
+ if (rq->cmd_flags & REQ_META)
cfqq->meta_pending++;
cfq_update_io_thinktime(cfqd, cic);
unsigned long now;
now = jiffies;
- cfq_log_cfqq(cfqd, cfqq, "complete rqnoidle %d", !!rq_noidle(rq));
+ cfq_log_cfqq(cfqd, cfqq, "complete rqnoidle %d",
+ !!(rq->cmd_flags & REQ_NOIDLE));
cfq_update_hw_tag(cfqd);
cfq_slice_expired(cfqd, 1);
else if (sync && cfqq_empty &&
!cfq_close_cooperator(cfqd, cfqq)) {
- cfqd->noidle_tree_requires_idle |= !rq_noidle(rq);
+ cfqd->noidle_tree_requires_idle |=
+ !(rq->cmd_flags & REQ_NOIDLE);
/*
* Idling is enabled for SYNC_WORKLOAD.
* SYNC_NOIDLE_WORKLOAD idles at the end of the tree
- * only if we processed at least one !rq_noidle request
+ * only if we processed at least one !REQ_NOIDLE request
*/
if (cfqd->serving_type == SYNC_WORKLOAD
|| cfqd->noidle_tree_requires_idle
return err;
}
-struct compat_blk_user_trace_setup {
- char name[32];
- u16 act_mask;
- u32 buf_size;
- u32 buf_nr;
- compat_u64 start_lba;
- compat_u64 end_lba;
- u32 pid;
-};
-#define BLKTRACESETUP32 _IOWR(0x12, 115, struct compat_blk_user_trace_setup)
-
-static int compat_blk_trace_setup(struct block_device *bdev, char __user *arg)
-{
- struct blk_user_trace_setup buts;
- struct compat_blk_user_trace_setup cbuts;
- struct request_queue *q;
- char b[BDEVNAME_SIZE];
- int ret;
-
- q = bdev_get_queue(bdev);
- if (!q)
- return -ENXIO;
-
- if (copy_from_user(&cbuts, arg, sizeof(cbuts)))
- return -EFAULT;
-
- bdevname(bdev, b);
-
- buts = (struct blk_user_trace_setup) {
- .act_mask = cbuts.act_mask,
- .buf_size = cbuts.buf_size,
- .buf_nr = cbuts.buf_nr,
- .start_lba = cbuts.start_lba,
- .end_lba = cbuts.end_lba,
- .pid = cbuts.pid,
- };
- memcpy(&buts.name, &cbuts.name, 32);
-
- mutex_lock(&bdev->bd_mutex);
- ret = do_blk_trace_setup(q, b, bdev->bd_dev, bdev, &buts);
- mutex_unlock(&bdev->bd_mutex);
- if (ret)
- return ret;
-
- if (copy_to_user(arg, &buts.name, 32))
- return -EFAULT;
-
- return 0;
-}
-
static int compat_blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
case BLKFLSBUF:
case BLKROSET:
case BLKDISCARD:
+ case BLKSECDISCARD:
/*
* the ones below are implemented in blkdev_locked_ioctl,
* but we call blkdev_ioctl, which gets the lock for us
return compat_put_u64(arg, bdev->bd_inode->i_size);
case BLKTRACESETUP32:
- lock_kernel();
- ret = compat_blk_trace_setup(bdev, compat_ptr(arg));
- unlock_kernel();
- return ret;
case BLKTRACESTART: /* compatible */
case BLKTRACESTOP: /* compatible */
case BLKTRACETEARDOWN: /* compatible */
- lock_kernel();
ret = blk_trace_ioctl(bdev, cmd, compat_ptr(arg));
- unlock_kernel();
return ret;
default:
if (disk->fops->compat_ioctl)
/*
* Don't merge file system requests and discard requests
*/
- if (bio_rw_flagged(bio, BIO_RW_DISCARD) !=
- bio_rw_flagged(rq->bio, BIO_RW_DISCARD))
+ if ((bio->bi_rw & REQ_DISCARD) != (rq->bio->bi_rw & REQ_DISCARD))
+ return 0;
+
+ /*
+ * Don't merge discard requests and secure discard requests
+ */
+ if ((bio->bi_rw & REQ_SECURE) != (rq->bio->bi_rw & REQ_SECURE))
return 0;
/*
list_for_each_prev(entry, &q->queue_head) {
struct request *pos = list_entry_rq(entry);
- if (blk_discard_rq(rq) != blk_discard_rq(pos))
+ if ((rq->cmd_flags & REQ_DISCARD) !=
+ (pos->cmd_flags & REQ_DISCARD))
break;
if (rq_data_dir(rq) != rq_data_dir(pos))
break;
*/
if (blk_account_rq(rq)) {
q->in_flight[rq_is_sync(rq)]--;
- if (blk_sorted_rq(rq))
+ if (rq->cmd_flags & REQ_SORTED)
elv_deactivate_rq(q, rq);
}
break;
case ELEVATOR_INSERT_SORT:
- BUG_ON(!blk_fs_request(rq) && !blk_discard_rq(rq));
+ BUG_ON(rq->cmd_type != REQ_TYPE_FS &&
+ !(rq->cmd_flags & REQ_DISCARD));
rq->cmd_flags |= REQ_SORTED;
q->nr_sorted++;
if (rq_mergeable(rq)) {
/*
* toggle ordered color
*/
- if (blk_barrier_rq(rq))
+ if (rq->cmd_flags & REQ_HARDBARRIER)
q->ordcolor ^= 1;
/*
* this request is scheduling boundary, update
* end_sector
*/
- if (blk_fs_request(rq) || blk_discard_rq(rq)) {
+ if (rq->cmd_type == REQ_TYPE_FS ||
+ (rq->cmd_flags & REQ_DISCARD)) {
q->end_sector = rq_end_sector(rq);
q->boundary_rq = rq;
}
*/
if (blk_account_rq(rq)) {
q->in_flight[rq_is_sync(rq)]--;
- if (blk_sorted_rq(rq) && e->ops->elevator_completed_req_fn)
+ if ((rq->cmd_flags & REQ_SORTED) &&
+ e->ops->elevator_completed_req_fn)
e->ops->elevator_completed_req_fn(q, rq);
}
}
static int blk_ioctl_discard(struct block_device *bdev, uint64_t start,
- uint64_t len)
+ uint64_t len, int secure)
{
+ unsigned long flags = BLKDEV_IFL_WAIT;
+
if (start & 511)
return -EINVAL;
if (len & 511)
if (start + len > (bdev->bd_inode->i_size >> 9))
return -EINVAL;
- return blkdev_issue_discard(bdev, start, len, GFP_KERNEL,
- BLKDEV_IFL_WAIT);
+ if (secure)
+ flags |= BLKDEV_IFL_SECURE;
+ return blkdev_issue_discard(bdev, start, len, GFP_KERNEL, flags);
}
static int put_ushort(unsigned long arg, unsigned short val)
unsigned cmd, unsigned long arg)
{
struct gendisk *disk = bdev->bd_disk;
- int ret;
if (disk->fops->ioctl)
return disk->fops->ioctl(bdev, mode, cmd, arg);
- if (disk->fops->locked_ioctl) {
- lock_kernel();
- ret = disk->fops->locked_ioctl(bdev, mode, cmd, arg);
- unlock_kernel();
- return ret;
- }
-
return -ENOTTY;
}
/*
EXPORT_SYMBOL_GPL(__blkdev_driver_ioctl);
/*
- * always keep this in sync with compat_blkdev_ioctl() and
- * compat_blkdev_locked_ioctl()
+ * always keep this in sync with compat_blkdev_ioctl()
*/
int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
unsigned long arg)
if (ret != -EINVAL && ret != -ENOTTY)
return ret;
- lock_kernel();
fsync_bdev(bdev);
invalidate_bdev(bdev);
- unlock_kernel();
return 0;
case BLKROSET:
return -EACCES;
if (get_user(n, (int __user *)(arg)))
return -EFAULT;
- lock_kernel();
set_device_ro(bdev, n);
- unlock_kernel();
return 0;
- case BLKDISCARD: {
+ case BLKDISCARD:
+ case BLKSECDISCARD: {
uint64_t range[2];
if (!(mode & FMODE_WRITE))
if (copy_from_user(range, (void __user *)arg, sizeof(range)))
return -EFAULT;
- return blk_ioctl_discard(bdev, range[0], range[1]);
+ return blk_ioctl_discard(bdev, range[0], range[1],
+ cmd == BLKSECDISCARD);
}
case HDIO_GETGEO: {
bd_release(bdev);
return ret;
case BLKPG:
- lock_kernel();
ret = blkpg_ioctl(bdev, (struct blkpg_ioctl_arg __user *) arg);
- unlock_kernel();
break;
case BLKRRPART:
- lock_kernel();
ret = blkdev_reread_part(bdev);
- unlock_kernel();
break;
case BLKGETSIZE:
size = bdev->bd_inode->i_size;
case BLKTRACESTOP:
case BLKTRACESETUP:
case BLKTRACETEARDOWN:
- lock_kernel();
ret = blk_trace_ioctl(bdev, cmd, (char __user *) arg);
- unlock_kernel();
break;
default:
ret = __blkdev_driver_ioctl(bdev, mode, cmd, arg);
tristate
select ASYNC_CORE
select ASYNC_PQ
+ select ASYNC_XOR
+
+config ASYNC_RAID6_TEST
+ tristate "Self test for hardware accelerated raid6 recovery"
+ depends on ASYNC_RAID6_RECOV
+ select ASYNC_MEMCPY
+ ---help---
+ This is a one-shot self test that permutes through the
+ recovery of all the possible two disk failure scenarios for a
+ N-disk array. Recovery is performed with the asynchronous
+ raid6 recovery routines, and will optionally use an offload
+ engine if one is available.
+
+ If unsure, say N.
config ASYNC_TX_DISABLE_PQ_VAL_DMA
bool
they have been replaced by functions in /sys.
The deprecated files (and their replacements) include:
- /proc/acpi/sleep (/sys/power/state)
- /proc/acpi/info (/sys/module/acpi/parameters/acpica_version)
- /proc/acpi/dsdt (/sys/firmware/acpi/tables/DSDT)
- /proc/acpi/fadt (/sys/firmware/acpi/tables/FACP)
- /proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer)
- /proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level)
- /proc/acpi/processor/*/power (/sys/devices/system/cpu/*/cpuidle/*)
- /proc/acpi/processor/*/performance (/sys/devices/system/cpu/*/
- cpufreq/*)
/proc/acpi/processor/*/throttling (/sys/class/thermal/
cooling_device*/*)
+ /proc/acpi/video/*/brightness (/sys/class/backlight/)
+ /proc/acpi/thermal_zone/*/* (/sys/class/thermal/)
This option has no effect on /proc/acpi/ files
and functions which do not yet exist in /sys.
acpi-$(CONFIG_ACPI_DOCK) += dock.o
acpi-y += pci_root.o pci_link.o pci_irq.o pci_bind.o
acpi-y += power.o
-acpi-y += system.o event.o
-acpi-$(CONFIG_ACPI_DEBUG) += debug.o
+acpi-y += event.o
+acpi-y += sysfs.o
+acpi-$(CONFIG_DEBUG_FS) += debugfs.o
acpi-$(CONFIG_ACPI_NUMA) += numa.o
acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o
ifdef CONFIG_ACPI_VIDEO
acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+acpi_status acpi_raw_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+
+acpi_status acpi_raw_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+
struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
u32 gpe_number);
/*
* Optionally enable output from the AML Debug Object.
*/
-u8 ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE);
+u32 ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE);
/*
* Optionally copy the entire DSDT to local memory (instead of simply
acpi_event_handler address; /* Address of handler, if any */
void *context; /* Context to be passed to handler */
struct acpi_namespace_node *method_node; /* Method node for this GPE level (saved) */
+ u8 orig_flags; /* Original misc info about this GPE */
};
union acpi_gpe_dispatch_info {
}
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_raw_enable_gpe
+ *
+ * PARAMETERS: gpe_event_info - GPE to enable
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
+ * hardware-enabled.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_raw_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+{
+ acpi_status status = AE_OK;
+
+ if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) {
+ return_ACPI_STATUS(AE_LIMIT);
+ }
+
+ gpe_event_info->runtime_count++;
+ if (gpe_event_info->runtime_count == 1) {
+ status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_ev_enable_gpe(gpe_event_info);
+ }
+
+ if (ACPI_FAILURE(status)) {
+ gpe_event_info->runtime_count--;
+ }
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_raw_disable_gpe
+ *
+ * PARAMETERS: gpe_event_info - GPE to disable
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Remove a reference to a GPE. When the last reference is
+ * removed, the GPE is hardware-disabled.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_raw_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+{
+ acpi_status status = AE_OK;
+
+ if (!gpe_event_info->runtime_count) {
+ return_ACPI_STATUS(AE_LIMIT);
+ }
+
+ gpe_event_info->runtime_count--;
+ if (!gpe_event_info->runtime_count) {
+ status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_hw_low_set_gpe(gpe_event_info,
+ ACPI_GPE_DISABLE);
+ }
+
+ if (ACPI_FAILURE(status)) {
+ gpe_event_info->runtime_count++;
+ }
+ }
+
+ return_ACPI_STATUS(status);
+}
+
/*******************************************************************************
*
* FUNCTION: acpi_ev_low_get_gpe_info
return_ACPI_STATUS(status);
}
+ /* Allocate memory for the handler object */
+
+ handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_handler_info));
+ if (!handler) {
+ status = AE_NO_MEMORY;
+ goto unlock_and_exit;
+ }
+
+ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ goto free_and_exit;
}
/* Make sure that there isn't a handler there already */
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_HANDLER) {
status = AE_ALREADY_EXISTS;
- goto unlock_and_exit;
+ goto free_and_exit;
}
/* Allocate and init handler object */
- handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_handler_info));
- if (!handler) {
- status = AE_NO_MEMORY;
- goto unlock_and_exit;
- }
-
handler->address = address;
handler->context = context;
handler->method_node = gpe_event_info->dispatch.method_node;
+ handler->orig_flags = gpe_event_info->flags &
+ (ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
+
+ /*
+ * If the GPE is associated with a method and it cannot wake up the
+ * system from sleep states, it was enabled automatically during
+ * initialization, so it has to be disabled now to avoid spurious
+ * execution of the handler.
+ */
+
+ if ((handler->orig_flags & ACPI_GPE_DISPATCH_METHOD)
+ && !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE))
+ (void)acpi_raw_disable_gpe(gpe_event_info);
/* Install the handler */
- flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
gpe_event_info->dispatch.handler = handler;
/* Setup up dispatch flags to indicate handler (vs. method) */
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
+
+free_and_exit:
+ acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+ ACPI_FREE(handler);
+ goto unlock_and_exit;
}
ACPI_EXPORT_SYMBOL(acpi_install_gpe_handler)
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
+ /* Make sure all deferred tasks are completed */
+
+ acpi_os_wait_events_complete(NULL);
+
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
+ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
goto unlock_and_exit;
}
- /* Make sure all deferred tasks are completed */
-
- (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
- acpi_os_wait_events_complete(NULL);
- status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
/* Remove the handler */
- flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
handler = gpe_event_info->dispatch.handler;
/* Restore Method node (if any), set dispatch flags */
gpe_event_info->dispatch.method_node = handler->method_node;
- gpe_event_info->flags &= ~ACPI_GPE_DISPATCH_MASK; /* Clear bits */
- if (handler->method_node) {
- gpe_event_info->flags |= ACPI_GPE_DISPATCH_METHOD;
- }
- acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+ gpe_event_info->flags &=
+ ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
+ gpe_event_info->flags |= handler->orig_flags;
+
+ /*
+ * If the GPE was previously associated with a method and it cannot wake
+ * up the system from sleep states, it should be enabled at this point
+ * to restore the post-initialization configuration.
+ */
+
+ if ((handler->orig_flags & ACPI_GPE_DISPATCH_METHOD)
+ && !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE))
+ (void)acpi_raw_enable_gpe(gpe_event_info);
/* Now we can free the handler object */
ACPI_FREE(handler);
- unlock_and_exit:
+unlock_and_exit:
+ acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
******************************************************************************/
acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
- acpi_status status = AE_OK;
+ acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
- if (!gpe_event_info) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ if (gpe_event_info) {
+ status = acpi_raw_enable_gpe(gpe_event_info);
}
- if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) {
- status = AE_LIMIT; /* Too many references */
- goto unlock_and_exit;
- }
-
- gpe_event_info->runtime_count++;
- if (gpe_event_info->runtime_count == 1) {
- status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
- if (ACPI_SUCCESS(status)) {
- status = acpi_ev_enable_gpe(gpe_event_info);
- }
- if (ACPI_FAILURE(status)) {
- gpe_event_info->runtime_count--;
- }
- }
-
-unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
******************************************************************************/
acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
- acpi_status status = AE_OK;
+ acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
- if (!gpe_event_info) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
- }
-
- /* Hardware-disable a runtime GPE on removal of the last reference */
-
- if (!gpe_event_info->runtime_count) {
- status = AE_LIMIT; /* There are no references to remove */
- goto unlock_and_exit;
+ if (gpe_event_info) {
+ status = acpi_raw_disable_gpe(gpe_event_info) ;
}
- gpe_event_info->runtime_count--;
- if (!gpe_event_info->runtime_count) {
- status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
- if (ACPI_SUCCESS(status)) {
- status =
- acpi_hw_low_set_gpe(gpe_event_info,
- ACPI_GPE_DISABLE);
- }
- if (ACPI_FAILURE(status)) {
- gpe_event_info->runtime_count++;
- }
- }
-
-unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
- u8 disable = 0;
ACPI_FUNCTION_TRACE(acpi_gpe_can_wake);
}
gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
- disable = (gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)
- && gpe_event_info->runtime_count;
+ if (gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD) {
+ (void)acpi_raw_disable_gpe(gpe_event_info);
+ }
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
-
- if (disable)
- status = acpi_disable_gpe(gpe_device, gpe_number);
-
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_gpe_can_wake)
acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id)
{
- acpi_thread_id this_thread_id;
-
ACPI_FUNCTION_NAME(ut_release_mutex);
- this_thread_id = acpi_os_get_thread_id();
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Thread %p releasing Mutex [%s]\n",
- ACPI_CAST_PTR(void, this_thread_id),
+ ACPI_CAST_PTR(void, acpi_os_get_thread_id()),
acpi_ut_get_mutex_name(mutex_id)));
if (mutex_id > ACPI_MAX_MUTEX) {
EINJ provides a hardware error injection mechanism, it is
mainly used for debugging and testing the other parts of
APEI and some other RAS features.
+
+config ACPI_APEI_ERST_DEBUG
+ tristate "APEI Error Record Serialization Table (ERST) Debug Support"
+ depends on ACPI_APEI
+ help
+ ERST is a way provided by APEI to save and retrieve hardware
+ error infomation to and from a persistent store. Enable this
+ if you want to debugging and testing the ERST kernel support
+ and firmware implementation.
obj-$(CONFIG_ACPI_APEI) += apei.o
obj-$(CONFIG_ACPI_APEI_GHES) += ghes.o
obj-$(CONFIG_ACPI_APEI_EINJ) += einj.o
+obj-$(CONFIG_ACPI_APEI_ERST_DEBUG) += erst-dbg.o
apei-y := apei-base.o hest.o cper.o erst.o
list_for_each_entry(res, &resources->ioport, list) {
if (res == res_bak)
break;
- release_mem_region(res->start, res->end - res->start);
+ release_region(res->start, res->end - res->start);
}
res_bak = NULL;
err_unmap_iomem:
list_for_each_entry(res, &resources->iomem, list) {
if (res == res_bak)
break;
- release_region(res->start, res->end - res->start);
+ release_mem_region(res->start, res->end - res->start);
}
return -EINVAL;
}
--- /dev/null
+/*
+ * APEI Error Record Serialization Table debug support
+ *
+ * ERST is a way provided by APEI to save and retrieve hardware error
+ * infomation to and from a persistent store. This file provide the
+ * debugging/testing support for ERST kernel support and firmware
+ * implementation.
+ *
+ * Copyright 2010 Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <acpi/apei.h>
+#include <linux/miscdevice.h>
+
+#include "apei-internal.h"
+
+#define ERST_DBG_PFX "ERST DBG: "
+
+#define ERST_DBG_RECORD_LEN_MAX 4096
+
+static void *erst_dbg_buf;
+static unsigned int erst_dbg_buf_len;
+
+/* Prevent erst_dbg_read/write from being invoked concurrently */
+static DEFINE_MUTEX(erst_dbg_mutex);
+
+static int erst_dbg_open(struct inode *inode, struct file *file)
+{
+ if (erst_disable)
+ return -ENODEV;
+
+ return nonseekable_open(inode, file);
+}
+
+static long erst_dbg_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
+{
+ int rc;
+ u64 record_id;
+ u32 record_count;
+
+ switch (cmd) {
+ case APEI_ERST_CLEAR_RECORD:
+ rc = copy_from_user(&record_id, (void __user *)arg,
+ sizeof(record_id));
+ if (rc)
+ return -EFAULT;
+ return erst_clear(record_id);
+ case APEI_ERST_GET_RECORD_COUNT:
+ rc = erst_get_record_count();
+ if (rc < 0)
+ return rc;
+ record_count = rc;
+ rc = put_user(record_count, (u32 __user *)arg);
+ if (rc)
+ return rc;
+ return 0;
+ default:
+ return -ENOTTY;
+ }
+}
+
+static ssize_t erst_dbg_read(struct file *filp, char __user *ubuf,
+ size_t usize, loff_t *off)
+{
+ int rc;
+ ssize_t len = 0;
+ u64 id;
+
+ if (*off != 0)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&erst_dbg_mutex) != 0)
+ return -EINTR;
+
+retry_next:
+ rc = erst_get_next_record_id(&id);
+ if (rc)
+ goto out;
+ /* no more record */
+ if (id == APEI_ERST_INVALID_RECORD_ID)
+ goto out;
+retry:
+ rc = len = erst_read(id, erst_dbg_buf, erst_dbg_buf_len);
+ /* The record may be cleared by others, try read next record */
+ if (rc == -ENOENT)
+ goto retry_next;
+ if (rc < 0)
+ goto out;
+ if (len > ERST_DBG_RECORD_LEN_MAX) {
+ pr_warning(ERST_DBG_PFX
+ "Record (ID: 0x%llx) length is too long: %zd\n",
+ id, len);
+ rc = -EIO;
+ goto out;
+ }
+ if (len > erst_dbg_buf_len) {
+ kfree(erst_dbg_buf);
+ rc = -ENOMEM;
+ erst_dbg_buf = kmalloc(len, GFP_KERNEL);
+ if (!erst_dbg_buf)
+ goto out;
+ erst_dbg_buf_len = len;
+ goto retry;
+ }
+
+ rc = -EINVAL;
+ if (len > usize)
+ goto out;
+
+ rc = -EFAULT;
+ if (copy_to_user(ubuf, erst_dbg_buf, len))
+ goto out;
+ rc = 0;
+out:
+ mutex_unlock(&erst_dbg_mutex);
+ return rc ? rc : len;
+}
+
+static ssize_t erst_dbg_write(struct file *filp, const char __user *ubuf,
+ size_t usize, loff_t *off)
+{
+ int rc;
+ struct cper_record_header *rcd;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (usize > ERST_DBG_RECORD_LEN_MAX) {
+ pr_err(ERST_DBG_PFX "Too long record to be written\n");
+ return -EINVAL;
+ }
+
+ if (mutex_lock_interruptible(&erst_dbg_mutex))
+ return -EINTR;
+ if (usize > erst_dbg_buf_len) {
+ kfree(erst_dbg_buf);
+ rc = -ENOMEM;
+ erst_dbg_buf = kmalloc(usize, GFP_KERNEL);
+ if (!erst_dbg_buf)
+ goto out;
+ erst_dbg_buf_len = usize;
+ }
+ rc = copy_from_user(erst_dbg_buf, ubuf, usize);
+ if (rc) {
+ rc = -EFAULT;
+ goto out;
+ }
+ rcd = erst_dbg_buf;
+ rc = -EINVAL;
+ if (rcd->record_length != usize)
+ goto out;
+
+ rc = erst_write(erst_dbg_buf);
+
+out:
+ mutex_unlock(&erst_dbg_mutex);
+ return rc < 0 ? rc : usize;
+}
+
+static const struct file_operations erst_dbg_ops = {
+ .owner = THIS_MODULE,
+ .open = erst_dbg_open,
+ .read = erst_dbg_read,
+ .write = erst_dbg_write,
+ .unlocked_ioctl = erst_dbg_ioctl,
+};
+
+static struct miscdevice erst_dbg_dev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "erst_dbg",
+ .fops = &erst_dbg_ops,
+};
+
+static __init int erst_dbg_init(void)
+{
+ return misc_register(&erst_dbg_dev);
+}
+
+static __exit void erst_dbg_exit(void)
+{
+ misc_deregister(&erst_dbg_dev);
+ kfree(erst_dbg_buf);
+}
+
+module_init(erst_dbg_init);
+module_exit(erst_dbg_exit);
+
+MODULE_AUTHOR("Huang Ying");
+MODULE_DESCRIPTION("APEI Error Record Serialization Table debug support");
+MODULE_LICENSE("GPL");
#include <linux/uaccess.h>
#include <linux/cper.h>
#include <linux/nmi.h>
+#include <linux/hardirq.h>
#include <acpi/apei.h>
#include "apei-internal.h"
#include <linux/interrupt.h>
#include <linux/cper.h>
#include <linux/kdebug.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
#include <acpi/apei.h>
#include <acpi/atomicio.h>
#include <acpi/hed.h>
* used for that.
*/
static LIST_HEAD(ghes_sci);
+static DEFINE_MUTEX(ghes_list_mutex);
static struct ghes *ghes_new(struct acpi_hest_generic *generic)
{
}
enum {
- GHES_SER_NO = 0x0,
- GHES_SER_CORRECTED = 0x1,
- GHES_SER_RECOVERABLE = 0x2,
- GHES_SER_PANIC = 0x3,
+ GHES_SEV_NO = 0x0,
+ GHES_SEV_CORRECTED = 0x1,
+ GHES_SEV_RECOVERABLE = 0x2,
+ GHES_SEV_PANIC = 0x3,
};
static inline int ghes_severity(int severity)
{
switch (severity) {
- case CPER_SER_INFORMATIONAL:
- return GHES_SER_NO;
- case CPER_SER_CORRECTED:
- return GHES_SER_CORRECTED;
- case CPER_SER_RECOVERABLE:
- return GHES_SER_RECOVERABLE;
- case CPER_SER_FATAL:
- return GHES_SER_PANIC;
+ case CPER_SEV_INFORMATIONAL:
+ return GHES_SEV_NO;
+ case CPER_SEV_CORRECTED:
+ return GHES_SEV_CORRECTED;
+ case CPER_SEV_RECOVERABLE:
+ return GHES_SEV_RECOVERABLE;
+ case CPER_SEV_FATAL:
+ return GHES_SEV_PANIC;
default:
/* Unkown, go panic */
- return GHES_SER_PANIC;
+ return GHES_SEV_PANIC;
}
}
static void ghes_do_proc(struct ghes *ghes)
{
- int ser, processed = 0;
+ int sev, processed = 0;
struct acpi_hest_generic_data *gdata;
- ser = ghes_severity(ghes->estatus->error_severity);
+ sev = ghes_severity(ghes->estatus->error_severity);
apei_estatus_for_each_section(ghes->estatus, gdata) {
#ifdef CONFIG_X86_MCE
if (!uuid_le_cmp(*(uuid_le *)gdata->section_type,
CPER_SEC_PLATFORM_MEM)) {
apei_mce_report_mem_error(
- ser == GHES_SER_CORRECTED,
+ sev == GHES_SEV_CORRECTED,
(struct cper_sec_mem_err *)(gdata+1));
processed = 1;
}
.notifier_call = ghes_notify_sci,
};
-static int hest_ghes_parse(struct acpi_hest_header *hest_hdr, void *data)
+static int __devinit ghes_probe(struct platform_device *ghes_dev)
{
struct acpi_hest_generic *generic;
struct ghes *ghes = NULL;
- int rc = 0;
+ int rc = -EINVAL;
- if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR)
- return 0;
-
- generic = (struct acpi_hest_generic *)hest_hdr;
+ generic = ghes_dev->dev.platform_data;
if (!generic->enabled)
- return 0;
+ return -ENODEV;
if (generic->error_block_length <
sizeof(struct acpi_hest_generic_status)) {
ghes = NULL;
goto err;
}
- switch (generic->notify.type) {
- case ACPI_HEST_NOTIFY_POLLED:
- pr_warning(GHES_PFX
-"Generic hardware error source: %d notified via POLL is not supported!\n",
- generic->header.source_id);
- break;
- case ACPI_HEST_NOTIFY_EXTERNAL:
- case ACPI_HEST_NOTIFY_LOCAL:
- pr_warning(GHES_PFX
-"Generic hardware error source: %d notified via IRQ is not supported!\n",
- generic->header.source_id);
- break;
- case ACPI_HEST_NOTIFY_SCI:
+ if (generic->notify.type == ACPI_HEST_NOTIFY_SCI) {
+ mutex_lock(&ghes_list_mutex);
if (list_empty(&ghes_sci))
register_acpi_hed_notifier(&ghes_notifier_sci);
list_add_rcu(&ghes->list, &ghes_sci);
- break;
- case ACPI_HEST_NOTIFY_NMI:
- pr_warning(GHES_PFX
-"Generic hardware error source: %d notified via NMI is not supported!\n",
- generic->header.source_id);
- break;
- default:
- pr_warning(FW_WARN GHES_PFX
- "Unknown notification type: %u for generic hardware error source: %d\n",
- generic->notify.type, generic->header.source_id);
- break;
+ mutex_unlock(&ghes_list_mutex);
+ } else {
+ unsigned char *notify = NULL;
+
+ switch (generic->notify.type) {
+ case ACPI_HEST_NOTIFY_POLLED:
+ notify = "POLL";
+ break;
+ case ACPI_HEST_NOTIFY_EXTERNAL:
+ case ACPI_HEST_NOTIFY_LOCAL:
+ notify = "IRQ";
+ break;
+ case ACPI_HEST_NOTIFY_NMI:
+ notify = "NMI";
+ break;
+ }
+ if (notify) {
+ pr_warning(GHES_PFX
+"Generic hardware error source: %d notified via %s is not supported!\n",
+ generic->header.source_id, notify);
+ } else {
+ pr_warning(FW_WARN GHES_PFX
+"Unknown notification type: %u for generic hardware error source: %d\n",
+ generic->notify.type, generic->header.source_id);
+ }
+ rc = -ENODEV;
+ goto err;
}
+ platform_set_drvdata(ghes_dev, ghes);
return 0;
err:
- if (ghes)
+ if (ghes) {
ghes_fini(ghes);
+ kfree(ghes);
+ }
return rc;
}
-static void ghes_cleanup(void)
+static int __devexit ghes_remove(struct platform_device *ghes_dev)
{
- struct ghes *ghes, *nghes;
+ struct ghes *ghes;
+ struct acpi_hest_generic *generic;
- if (!list_empty(&ghes_sci))
- unregister_acpi_hed_notifier(&ghes_notifier_sci);
+ ghes = platform_get_drvdata(ghes_dev);
+ generic = ghes->generic;
+
+ switch (generic->notify.type) {
+ case ACPI_HEST_NOTIFY_SCI:
+ mutex_lock(&ghes_list_mutex);
+ list_del_rcu(&ghes->list);
+ if (list_empty(&ghes_sci))
+ unregister_acpi_hed_notifier(&ghes_notifier_sci);
+ mutex_unlock(&ghes_list_mutex);
+ break;
+ default:
+ BUG();
+ break;
+ }
synchronize_rcu();
+ ghes_fini(ghes);
+ kfree(ghes);
- list_for_each_entry_safe(ghes, nghes, &ghes_sci, list) {
- list_del(&ghes->list);
- ghes_fini(ghes);
- kfree(ghes);
- }
+ platform_set_drvdata(ghes_dev, NULL);
+
+ return 0;
}
+static struct platform_driver ghes_platform_driver = {
+ .driver = {
+ .name = "GHES",
+ .owner = THIS_MODULE,
+ },
+ .probe = ghes_probe,
+ .remove = ghes_remove,
+};
+
static int __init ghes_init(void)
{
- int rc;
-
if (acpi_disabled)
return -ENODEV;
return -EINVAL;
}
- rc = apei_hest_parse(hest_ghes_parse, NULL);
- if (rc) {
- pr_err(GHES_PFX
- "Error during parsing HEST generic hardware error sources.\n");
- goto err_cleanup;
- }
-
- if (list_empty(&ghes_sci)) {
- pr_info(GHES_PFX
- "No functional generic hardware error sources.\n");
- rc = -ENODEV;
- goto err_cleanup;
- }
-
- pr_info(GHES_PFX
- "Generic Hardware Error Source support is initialized.\n");
-
- return 0;
-err_cleanup:
- ghes_cleanup();
- return rc;
+ return platform_driver_register(&ghes_platform_driver);
}
static void __exit ghes_exit(void)
{
- ghes_cleanup();
+ platform_driver_unregister(&ghes_platform_driver);
}
module_init(ghes_init);
MODULE_AUTHOR("Huang Ying");
MODULE_DESCRIPTION("APEI Generic Hardware Error Source support");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:GHES");
#include <linux/kdebug.h>
#include <linux/highmem.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <acpi/apei.h>
#include "apei-internal.h"
static struct acpi_table_hest *hest_tab;
-static int hest_void_parse(struct acpi_hest_header *hest_hdr, void *data)
-{
- return 0;
-}
-
static int hest_esrc_len_tab[ACPI_HEST_TYPE_RESERVED] = {
[ACPI_HEST_TYPE_IA32_CHECK] = -1, /* need further calculation */
[ACPI_HEST_TYPE_IA32_CORRECTED_CHECK] = -1,
}
EXPORT_SYMBOL_GPL(apei_hest_parse);
+struct ghes_arr {
+ struct platform_device **ghes_devs;
+ unsigned int count;
+};
+
+static int hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data)
+{
+ int *count = data;
+
+ if (hest_hdr->type == ACPI_HEST_TYPE_GENERIC_ERROR)
+ (*count)++;
+ return 0;
+}
+
+static int hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
+{
+ struct acpi_hest_generic *generic;
+ struct platform_device *ghes_dev;
+ struct ghes_arr *ghes_arr = data;
+ int rc;
+
+ if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR)
+ return 0;
+ generic = (struct acpi_hest_generic *)hest_hdr;
+ if (!generic->enabled)
+ return 0;
+ ghes_dev = platform_device_alloc("GHES", hest_hdr->source_id);
+ if (!ghes_dev)
+ return -ENOMEM;
+ ghes_dev->dev.platform_data = generic;
+ rc = platform_device_add(ghes_dev);
+ if (rc)
+ goto err;
+ ghes_arr->ghes_devs[ghes_arr->count++] = ghes_dev;
+
+ return 0;
+err:
+ platform_device_put(ghes_dev);
+ return rc;
+}
+
+static int hest_ghes_dev_register(unsigned int ghes_count)
+{
+ int rc, i;
+ struct ghes_arr ghes_arr;
+
+ ghes_arr.count = 0;
+ ghes_arr.ghes_devs = kmalloc(sizeof(void *) * ghes_count, GFP_KERNEL);
+ if (!ghes_arr.ghes_devs)
+ return -ENOMEM;
+
+ rc = apei_hest_parse(hest_parse_ghes, &ghes_arr);
+ if (rc)
+ goto err;
+out:
+ kfree(ghes_arr.ghes_devs);
+ return rc;
+err:
+ for (i = 0; i < ghes_arr.count; i++)
+ platform_device_unregister(ghes_arr.ghes_devs[i]);
+ goto out;
+}
+
static int __init setup_hest_disable(char *str)
{
hest_disable = 1;
{
acpi_status status;
int rc = -ENODEV;
+ unsigned int ghes_count = 0;
if (acpi_disabled)
goto err;
goto err;
}
- rc = apei_hest_parse(hest_void_parse, NULL);
+ rc = apei_hest_parse(hest_parse_ghes_count, &ghes_count);
+ if (rc)
+ goto err;
+
+ rc = hest_ghes_dev_register(ghes_count);
if (rc)
goto err;
acpi_scan_init();
acpi_ec_init();
acpi_power_init();
- acpi_system_init();
- acpi_debug_init();
+ acpi_sysfs_init();
+ acpi_debugfs_init();
acpi_sleep_proc_init();
acpi_wakeup_device_init();
return result;
+++ /dev/null
-/*
- * debug.c - ACPI debug interface to userspace.
- */
-
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/moduleparam.h>
-#include <linux/debugfs.h>
-#include <linux/slab.h>
-#include <asm/uaccess.h>
-#include <acpi/acpi_drivers.h>
-
-#define _COMPONENT ACPI_SYSTEM_COMPONENT
-ACPI_MODULE_NAME("debug");
-
-struct acpi_dlayer {
- const char *name;
- unsigned long value;
-};
-struct acpi_dlevel {
- const char *name;
- unsigned long value;
-};
-#define ACPI_DEBUG_INIT(v) { .name = #v, .value = v }
-
-static const struct acpi_dlayer acpi_debug_layers[] = {
- ACPI_DEBUG_INIT(ACPI_UTILITIES),
- ACPI_DEBUG_INIT(ACPI_HARDWARE),
- ACPI_DEBUG_INIT(ACPI_EVENTS),
- ACPI_DEBUG_INIT(ACPI_TABLES),
- ACPI_DEBUG_INIT(ACPI_NAMESPACE),
- ACPI_DEBUG_INIT(ACPI_PARSER),
- ACPI_DEBUG_INIT(ACPI_DISPATCHER),
- ACPI_DEBUG_INIT(ACPI_EXECUTER),
- ACPI_DEBUG_INIT(ACPI_RESOURCES),
- ACPI_DEBUG_INIT(ACPI_CA_DEBUGGER),
- ACPI_DEBUG_INIT(ACPI_OS_SERVICES),
- ACPI_DEBUG_INIT(ACPI_CA_DISASSEMBLER),
- ACPI_DEBUG_INIT(ACPI_COMPILER),
- ACPI_DEBUG_INIT(ACPI_TOOLS),
-
- ACPI_DEBUG_INIT(ACPI_BUS_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_AC_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_PCI_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_POWER_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT),
-};
-
-static const struct acpi_dlevel acpi_debug_levels[] = {
- ACPI_DEBUG_INIT(ACPI_LV_INIT),
- ACPI_DEBUG_INIT(ACPI_LV_DEBUG_OBJECT),
- ACPI_DEBUG_INIT(ACPI_LV_INFO),
-
- ACPI_DEBUG_INIT(ACPI_LV_INIT_NAMES),
- ACPI_DEBUG_INIT(ACPI_LV_PARSE),
- ACPI_DEBUG_INIT(ACPI_LV_LOAD),
- ACPI_DEBUG_INIT(ACPI_LV_DISPATCH),
- ACPI_DEBUG_INIT(ACPI_LV_EXEC),
- ACPI_DEBUG_INIT(ACPI_LV_NAMES),
- ACPI_DEBUG_INIT(ACPI_LV_OPREGION),
- ACPI_DEBUG_INIT(ACPI_LV_BFIELD),
- ACPI_DEBUG_INIT(ACPI_LV_TABLES),
- ACPI_DEBUG_INIT(ACPI_LV_VALUES),
- ACPI_DEBUG_INIT(ACPI_LV_OBJECTS),
- ACPI_DEBUG_INIT(ACPI_LV_RESOURCES),
- ACPI_DEBUG_INIT(ACPI_LV_USER_REQUESTS),
- ACPI_DEBUG_INIT(ACPI_LV_PACKAGE),
-
- ACPI_DEBUG_INIT(ACPI_LV_ALLOCATIONS),
- ACPI_DEBUG_INIT(ACPI_LV_FUNCTIONS),
- ACPI_DEBUG_INIT(ACPI_LV_OPTIMIZATIONS),
-
- ACPI_DEBUG_INIT(ACPI_LV_MUTEX),
- ACPI_DEBUG_INIT(ACPI_LV_THREADS),
- ACPI_DEBUG_INIT(ACPI_LV_IO),
- ACPI_DEBUG_INIT(ACPI_LV_INTERRUPTS),
-
- ACPI_DEBUG_INIT(ACPI_LV_AML_DISASSEMBLE),
- ACPI_DEBUG_INIT(ACPI_LV_VERBOSE_INFO),
- ACPI_DEBUG_INIT(ACPI_LV_FULL_TABLES),
- ACPI_DEBUG_INIT(ACPI_LV_EVENTS),
-};
-
-/* --------------------------------------------------------------------------
- FS Interface (/sys)
- -------------------------------------------------------------------------- */
-static int param_get_debug_layer(char *buffer, struct kernel_param *kp) {
- int result = 0;
- int i;
-
- result = sprintf(buffer, "%-25s\tHex SET\n", "Description");
-
- for(i = 0; i <ARRAY_SIZE(acpi_debug_layers); i++) {
- result += sprintf(buffer+result, "%-25s\t0x%08lX [%c]\n",
- acpi_debug_layers[i].name,
- acpi_debug_layers[i].value,
- (acpi_dbg_layer & acpi_debug_layers[i].value) ? '*' : ' ');
- }
- result += sprintf(buffer+result, "%-25s\t0x%08X [%c]\n", "ACPI_ALL_DRIVERS",
- ACPI_ALL_DRIVERS,
- (acpi_dbg_layer & ACPI_ALL_DRIVERS) ==
- ACPI_ALL_DRIVERS ? '*' : (acpi_dbg_layer &
- ACPI_ALL_DRIVERS) == 0 ? ' ' : '-');
- result += sprintf(buffer+result, "--\ndebug_layer = 0x%08X ( * = enabled)\n", acpi_dbg_layer);
-
- return result;
-}
-
-static int param_get_debug_level(char *buffer, struct kernel_param *kp) {
- int result = 0;
- int i;
-
- result = sprintf(buffer, "%-25s\tHex SET\n", "Description");
-
- for (i = 0; i < ARRAY_SIZE(acpi_debug_levels); i++) {
- result += sprintf(buffer+result, "%-25s\t0x%08lX [%c]\n",
- acpi_debug_levels[i].name,
- acpi_debug_levels[i].value,
- (acpi_dbg_level & acpi_debug_levels[i].
- value) ? '*' : ' ');
- }
- result += sprintf(buffer+result, "--\ndebug_level = 0x%08X (* = enabled)\n",
- acpi_dbg_level);
-
- return result;
-}
-
-module_param_call(debug_layer, param_set_uint, param_get_debug_layer, &acpi_dbg_layer, 0644);
-module_param_call(debug_level, param_set_uint, param_get_debug_level, &acpi_dbg_level, 0644);
-
-static char trace_method_name[6];
-module_param_string(trace_method_name, trace_method_name, 6, 0644);
-static unsigned int trace_debug_layer;
-module_param(trace_debug_layer, uint, 0644);
-static unsigned int trace_debug_level;
-module_param(trace_debug_level, uint, 0644);
-
-static int param_set_trace_state(const char *val, struct kernel_param *kp)
-{
- int result = 0;
-
- if (!strncmp(val, "enable", strlen("enable") - 1)) {
- result = acpi_debug_trace(trace_method_name, trace_debug_level,
- trace_debug_layer, 0);
- if (result)
- result = -EBUSY;
- goto exit;
- }
-
- if (!strncmp(val, "disable", strlen("disable") - 1)) {
- int name = 0;
- result = acpi_debug_trace((char *)&name, trace_debug_level,
- trace_debug_layer, 0);
- if (result)
- result = -EBUSY;
- goto exit;
- }
-
- if (!strncmp(val, "1", 1)) {
- result = acpi_debug_trace(trace_method_name, trace_debug_level,
- trace_debug_layer, 1);
- if (result)
- result = -EBUSY;
- goto exit;
- }
-
- result = -EINVAL;
-exit:
- return result;
-}
-
-static int param_get_trace_state(char *buffer, struct kernel_param *kp)
-{
- if (!acpi_gbl_trace_method_name)
- return sprintf(buffer, "disable");
- else {
- if (acpi_gbl_trace_flags & 1)
- return sprintf(buffer, "1");
- else
- return sprintf(buffer, "enable");
- }
- return 0;
-}
-
-module_param_call(trace_state, param_set_trace_state, param_get_trace_state,
- NULL, 0644);
-
-/* --------------------------------------------------------------------------
- DebugFS Interface
- -------------------------------------------------------------------------- */
-
-static ssize_t cm_write(struct file *file, const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- static char *buf;
- static int uncopied_bytes;
- struct acpi_table_header table;
- acpi_status status;
-
- if (!(*ppos)) {
- /* parse the table header to get the table length */
- if (count <= sizeof(struct acpi_table_header))
- return -EINVAL;
- if (copy_from_user(&table, user_buf,
- sizeof(struct acpi_table_header)))
- return -EFAULT;
- uncopied_bytes = table.length;
- buf = kzalloc(uncopied_bytes, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- }
-
- if (uncopied_bytes < count) {
- kfree(buf);
- return -EINVAL;
- }
-
- if (copy_from_user(buf + (*ppos), user_buf, count)) {
- kfree(buf);
- return -EFAULT;
- }
-
- uncopied_bytes -= count;
- *ppos += count;
-
- if (!uncopied_bytes) {
- status = acpi_install_method(buf);
- kfree(buf);
- if (ACPI_FAILURE(status))
- return -EINVAL;
- add_taint(TAINT_OVERRIDDEN_ACPI_TABLE);
- }
-
- return count;
-}
-
-static const struct file_operations cm_fops = {
- .write = cm_write,
-};
-
-static int acpi_debugfs_init(void)
-{
- struct dentry *acpi_dir, *cm_dentry;
-
- acpi_dir = debugfs_create_dir("acpi", NULL);
- if (!acpi_dir)
- goto err;
-
- cm_dentry = debugfs_create_file("custom_method", S_IWUGO,
- acpi_dir, NULL, &cm_fops);
- if (!cm_dentry)
- goto err;
-
- return 0;
-
-err:
- if (acpi_dir)
- debugfs_remove(acpi_dir);
- return -EINVAL;
-}
-
-/* --------------------------------------------------------------------------
- FS Interface (/proc)
- -------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_PROCFS
-#define ACPI_SYSTEM_FILE_DEBUG_LAYER "debug_layer"
-#define ACPI_SYSTEM_FILE_DEBUG_LEVEL "debug_level"
-
-static int acpi_system_debug_proc_show(struct seq_file *m, void *v)
-{
- unsigned int i;
-
- seq_printf(m, "%-25s\tHex SET\n", "Description");
-
- switch ((unsigned long)m->private) {
- case 0:
- for (i = 0; i < ARRAY_SIZE(acpi_debug_layers); i++) {
- seq_printf(m, "%-25s\t0x%08lX [%c]\n",
- acpi_debug_layers[i].name,
- acpi_debug_layers[i].value,
- (acpi_dbg_layer & acpi_debug_layers[i].
- value) ? '*' : ' ');
- }
- seq_printf(m, "%-25s\t0x%08X [%c]\n", "ACPI_ALL_DRIVERS",
- ACPI_ALL_DRIVERS,
- (acpi_dbg_layer & ACPI_ALL_DRIVERS) ==
- ACPI_ALL_DRIVERS ? '*' : (acpi_dbg_layer &
- ACPI_ALL_DRIVERS) ==
- 0 ? ' ' : '-');
- seq_printf(m,
- "--\ndebug_layer = 0x%08X (* = enabled, - = partial)\n",
- acpi_dbg_layer);
- break;
- case 1:
- for (i = 0; i < ARRAY_SIZE(acpi_debug_levels); i++) {
- seq_printf(m, "%-25s\t0x%08lX [%c]\n",
- acpi_debug_levels[i].name,
- acpi_debug_levels[i].value,
- (acpi_dbg_level & acpi_debug_levels[i].
- value) ? '*' : ' ');
- }
- seq_printf(m, "--\ndebug_level = 0x%08X (* = enabled)\n",
- acpi_dbg_level);
- break;
- }
- return 0;
-}
-
-static int acpi_system_debug_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_system_debug_proc_show, PDE(inode)->data);
-}
-
-static ssize_t acpi_system_debug_proc_write(struct file *file,
- const char __user * buffer,
- size_t count, loff_t *pos)
-{
- char debug_string[12] = { '\0' };
-
-
- if (count > sizeof(debug_string) - 1)
- return -EINVAL;
-
- if (copy_from_user(debug_string, buffer, count))
- return -EFAULT;
-
- debug_string[count] = '\0';
-
- switch ((unsigned long)PDE(file->f_path.dentry->d_inode)->data) {
- case 0:
- acpi_dbg_layer = simple_strtoul(debug_string, NULL, 0);
- break;
- case 1:
- acpi_dbg_level = simple_strtoul(debug_string, NULL, 0);
- break;
- default:
- return -EINVAL;
- }
-
- return count;
-}
-
-static const struct file_operations acpi_system_debug_proc_fops = {
- .owner = THIS_MODULE,
- .open = acpi_system_debug_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = acpi_system_debug_proc_write,
-};
-#endif
-
-int __init acpi_procfs_init(void)
-{
-#ifdef CONFIG_ACPI_PROCFS
- struct proc_dir_entry *entry;
- int error = 0;
- char *name;
-
- /* 'debug_layer' [R/W] */
- name = ACPI_SYSTEM_FILE_DEBUG_LAYER;
- entry = proc_create_data(name, S_IFREG | S_IRUGO | S_IWUSR,
- acpi_root_dir, &acpi_system_debug_proc_fops,
- (void *)0);
- if (!entry)
- goto Error;
-
- /* 'debug_level' [R/W] */
- name = ACPI_SYSTEM_FILE_DEBUG_LEVEL;
- entry = proc_create_data(name, S_IFREG | S_IRUGO | S_IWUSR,
- acpi_root_dir, &acpi_system_debug_proc_fops,
- (void *)1);
- if (!entry)
- goto Error;
-
- Done:
- return error;
-
- Error:
- remove_proc_entry(ACPI_SYSTEM_FILE_DEBUG_LEVEL, acpi_root_dir);
- remove_proc_entry(ACPI_SYSTEM_FILE_DEBUG_LAYER, acpi_root_dir);
- error = -ENODEV;
- goto Done;
-#else
- return 0;
-#endif
-}
-
-int __init acpi_debug_init(void)
-{
- acpi_debugfs_init();
- acpi_procfs_init();
- return 0;
-}
--- /dev/null
+/*
+ * debugfs.c - ACPI debugfs interface to userspace.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <acpi/acpi_drivers.h>
+
+#define _COMPONENT ACPI_SYSTEM_COMPONENT
+ACPI_MODULE_NAME("debugfs");
+
+
+/* /sys/modules/acpi/parameters/aml_debug_output */
+
+module_param_named(aml_debug_output, acpi_gbl_enable_aml_debug_object,
+ bool, 0644);
+MODULE_PARM_DESC(aml_debug_output,
+ "To enable/disable the ACPI Debug Object output.");
+
+/* /sys/kernel/debug/acpi/custom_method */
+
+static ssize_t cm_write(struct file *file, const char __user * user_buf,
+ size_t count, loff_t *ppos)
+{
+ static char *buf;
+ static int uncopied_bytes;
+ struct acpi_table_header table;
+ acpi_status status;
+
+ if (!(*ppos)) {
+ /* parse the table header to get the table length */
+ if (count <= sizeof(struct acpi_table_header))
+ return -EINVAL;
+ if (copy_from_user(&table, user_buf,
+ sizeof(struct acpi_table_header)))
+ return -EFAULT;
+ uncopied_bytes = table.length;
+ buf = kzalloc(uncopied_bytes, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ }
+
+ if (uncopied_bytes < count) {
+ kfree(buf);
+ return -EINVAL;
+ }
+
+ if (copy_from_user(buf + (*ppos), user_buf, count)) {
+ kfree(buf);
+ return -EFAULT;
+ }
+
+ uncopied_bytes -= count;
+ *ppos += count;
+
+ if (!uncopied_bytes) {
+ status = acpi_install_method(buf);
+ kfree(buf);
+ if (ACPI_FAILURE(status))
+ return -EINVAL;
+ add_taint(TAINT_OVERRIDDEN_ACPI_TABLE);
+ }
+
+ return count;
+}
+
+static const struct file_operations cm_fops = {
+ .write = cm_write,
+};
+
+int __init acpi_debugfs_init(void)
+{
+ struct dentry *acpi_dir, *cm_dentry;
+
+ acpi_dir = debugfs_create_dir("acpi", NULL);
+ if (!acpi_dir)
+ goto err;
+
+ cm_dentry = debugfs_create_file("custom_method", S_IWUGO,
+ acpi_dir, NULL, &cm_fops);
+ if (!cm_dentry)
+ goto err;
+
+ return 0;
+
+err:
+ if (acpi_dir)
+ debugfs_remove(acpi_dir);
+ return -EINVAL;
+}
status = acpi_get_object_info(handle, &info);
if (ACPI_SUCCESS(status)) {
- if (info->address == find->address)
+ if ((info->address == find->address)
+ && (info->valid & ACPI_VALID_ADR))
find->handle = handle;
kfree(info);
}
int init_acpi_device_notify(void);
int acpi_scan_init(void);
-int acpi_system_init(void);
+int acpi_sysfs_init(void);
-#ifdef CONFIG_ACPI_DEBUG
-int acpi_debug_init(void);
+#ifdef CONFIG_DEBUG_FS
+int acpi_debugfs_init(void);
#else
-static inline int acpi_debug_init(void) { return 0; }
+static inline int acpi_debugfs_init(void) { return 0; }
#endif
/* --------------------------------------------------------------------------
static int __init acpi_parse_srat(struct acpi_table_header *table)
{
- struct acpi_table_srat *srat;
-
if (!table)
return -EINVAL;
- srat = (struct acpi_table_srat *)table;
+ /* Real work done in acpi_table_parse_srat below. */
return 0;
}
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
{
- struct resource *res;
-
if (!addr->address || !length)
return;
+ /* Resources are never freed */
if (addr->space_id == ACPI_ADR_SPACE_SYSTEM_IO)
- res = request_region(addr->address, length, desc);
+ request_region(addr->address, length, desc);
else if (addr->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
- res = request_mem_region(addr->address, length, desc);
+ request_mem_region(addr->address, length, desc);
}
static int __init acpi_reserve_resources(void)
#include <linux/init.h>
#include <linux/types.h>
#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include "sleep.h"
static int acpi_power_add(struct acpi_device *device);
static int acpi_power_remove(struct acpi_device *device, int type);
static int acpi_power_resume(struct acpi_device *device);
-static int acpi_power_open_fs(struct inode *inode, struct file *file);
static const struct acpi_device_id power_device_ids[] = {
{ACPI_POWER_HID, 0},
static struct list_head acpi_power_resource_list;
-static const struct file_operations acpi_power_fops = {
- .owner = THIS_MODULE,
- .open = acpi_power_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
/* --------------------------------------------------------------------------
Power Resource Management
-------------------------------------------------------------------------- */
struct list_head *node, *next;
struct acpi_power_reference *ref;
-
result = acpi_power_get_context(handle, &resource);
if (result)
return result;
return result;
}
-/* --------------------------------------------------------------------------
- FS Interface (/proc)
- -------------------------------------------------------------------------- */
-
-static struct proc_dir_entry *acpi_power_dir;
-
-static int acpi_power_seq_show(struct seq_file *seq, void *offset)
-{
- int count = 0;
- int result = 0, state;
- struct acpi_power_resource *resource = NULL;
- struct list_head *node, *next;
- struct acpi_power_reference *ref;
-
-
- resource = seq->private;
-
- if (!resource)
- goto end;
-
- result = acpi_power_get_state(resource->device->handle, &state);
- if (result)
- goto end;
-
- seq_puts(seq, "state: ");
- switch (state) {
- case ACPI_POWER_RESOURCE_STATE_ON:
- seq_puts(seq, "on\n");
- break;
- case ACPI_POWER_RESOURCE_STATE_OFF:
- seq_puts(seq, "off\n");
- break;
- default:
- seq_puts(seq, "unknown\n");
- break;
- }
-
- mutex_lock(&resource->resource_lock);
- list_for_each_safe(node, next, &resource->reference) {
- ref = container_of(node, struct acpi_power_reference, node);
- count++;
- }
- mutex_unlock(&resource->resource_lock);
-
- seq_printf(seq, "system level: S%d\n"
- "order: %d\n"
- "reference count: %d\n",
- resource->system_level,
- resource->order, count);
-
- end:
- return 0;
-}
-
-static int acpi_power_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_power_seq_show, PDE(inode)->data);
-}
-
-static int acpi_power_add_fs(struct acpi_device *device)
-{
- struct proc_dir_entry *entry = NULL;
-
-
- if (!device)
- return -EINVAL;
-
- if (!acpi_device_dir(device)) {
- acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
- acpi_power_dir);
- if (!acpi_device_dir(device))
- return -ENODEV;
- }
-
- /* 'status' [R] */
- entry = proc_create_data(ACPI_POWER_FILE_STATUS,
- S_IRUGO, acpi_device_dir(device),
- &acpi_power_fops, acpi_driver_data(device));
- if (!entry)
- return -EIO;
- return 0;
-}
-
-static int acpi_power_remove_fs(struct acpi_device *device)
-{
-
- if (acpi_device_dir(device)) {
- remove_proc_entry(ACPI_POWER_FILE_STATUS,
- acpi_device_dir(device));
- remove_proc_entry(acpi_device_bid(device), acpi_power_dir);
- acpi_device_dir(device) = NULL;
- }
-
- return 0;
-}
-
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
break;
}
- result = acpi_power_add_fs(device);
- if (result)
- goto end;
-
printk(KERN_INFO PREFIX "%s [%s] (%s)\n", acpi_device_name(device),
acpi_device_bid(device), state ? "on" : "off");
resource = acpi_driver_data(device);
- acpi_power_remove_fs(device);
-
mutex_lock(&resource->resource_lock);
list_for_each_safe(node, next, &resource->reference) {
struct acpi_power_reference *ref = container_of(node, struct acpi_power_reference, node);
int __init acpi_power_init(void)
{
- int result = 0;
-
INIT_LIST_HEAD(&acpi_power_resource_list);
-
- acpi_power_dir = proc_mkdir(ACPI_POWER_CLASS, acpi_root_dir);
- if (!acpi_power_dir)
- return -ENODEV;
-
- result = acpi_bus_register_driver(&acpi_power_driver);
- if (result < 0) {
- remove_proc_entry(ACPI_POWER_CLASS, acpi_root_dir);
- return -ENODEV;
- }
-
- return 0;
+ return acpi_bus_register_driver(&acpi_power_driver);
}
/*
* this file provides support for:
- * /proc/acpi/sleep
* /proc/acpi/alarm
* /proc/acpi/wakeup
*/
ACPI_MODULE_NAME("sleep")
-#ifdef CONFIG_ACPI_PROCFS
-static int acpi_system_sleep_seq_show(struct seq_file *seq, void *offset)
-{
- int i;
-
- for (i = 0; i <= ACPI_STATE_S5; i++) {
- if (sleep_states[i]) {
- seq_printf(seq, "S%d ", i);
- }
- }
-
- seq_puts(seq, "\n");
-
- return 0;
-}
-
-static int acpi_system_sleep_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_system_sleep_seq_show, PDE(inode)->data);
-}
-
-static ssize_t
-acpi_system_write_sleep(struct file *file,
- const char __user * buffer, size_t count, loff_t * ppos)
-{
- char str[12];
- u32 state = 0;
- int error = 0;
-
- if (count > sizeof(str) - 1)
- goto Done;
- memset(str, 0, sizeof(str));
- if (copy_from_user(str, buffer, count))
- return -EFAULT;
-
- /* Check for S4 bios request */
- if (!strcmp(str, "4b")) {
- error = acpi_suspend(4);
- goto Done;
- }
- state = simple_strtoul(str, NULL, 0);
-#ifdef CONFIG_HIBERNATION
- if (state == 4) {
- error = hibernate();
- goto Done;
- }
-#endif
- error = acpi_suspend(state);
- Done:
- return error ? error : count;
-}
-#endif /* CONFIG_ACPI_PROCFS */
#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || !defined(CONFIG_X86)
/* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
.release = single_release,
};
-#ifdef CONFIG_ACPI_PROCFS
-static const struct file_operations acpi_system_sleep_fops = {
- .owner = THIS_MODULE,
- .open = acpi_system_sleep_open_fs,
- .read = seq_read,
- .write = acpi_system_write_sleep,
- .llseek = seq_lseek,
- .release = single_release,
-};
-#endif /* CONFIG_ACPI_PROCFS */
-
#ifdef HAVE_ACPI_LEGACY_ALARM
static const struct file_operations acpi_system_alarm_fops = {
.owner = THIS_MODULE,
int __init acpi_sleep_proc_init(void)
{
-#ifdef CONFIG_ACPI_PROCFS
- /* 'sleep' [R/W] */
- proc_create("sleep", S_IFREG | S_IRUGO | S_IWUSR,
- acpi_root_dir, &acpi_system_sleep_fops);
-#endif /* CONFIG_ACPI_PROCFS */
-
#ifdef HAVE_ACPI_LEGACY_ALARM
/* 'alarm' [R/W] */
proc_create("alarm", S_IFREG | S_IRUGO | S_IWUSR,
static int acpi_processor_add(struct acpi_device *device);
static int acpi_processor_remove(struct acpi_device *device, int type);
-#ifdef CONFIG_ACPI_PROCFS
-static int acpi_processor_info_open_fs(struct inode *inode, struct file *file);
-#endif
static void acpi_processor_notify(struct acpi_device *device, u32 event);
static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
static int acpi_processor_handle_eject(struct acpi_processor *pr);
#define INSTALL_NOTIFY_HANDLER 1
#define UNINSTALL_NOTIFY_HANDLER 2
-#ifdef CONFIG_ACPI_PROCFS
-static const struct file_operations acpi_processor_info_fops = {
- .owner = THIS_MODULE,
- .open = acpi_processor_info_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-#endif
DEFINE_PER_CPU(struct acpi_processor *, processors);
EXPORT_PER_CPU_SYMBOL(processors);
return result;
}
-/* --------------------------------------------------------------------------
- FS Interface (/proc)
- -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI_PROCFS
static struct proc_dir_entry *acpi_processor_dir = NULL;
-static int acpi_processor_info_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_processor *pr = seq->private;
-
-
- if (!pr)
- goto end;
-
- seq_printf(seq, "processor id: %d\n"
- "acpi id: %d\n"
- "bus mastering control: %s\n"
- "power management: %s\n"
- "throttling control: %s\n"
- "limit interface: %s\n",
- pr->id,
- pr->acpi_id,
- pr->flags.bm_control ? "yes" : "no",
- pr->flags.power ? "yes" : "no",
- pr->flags.throttling ? "yes" : "no",
- pr->flags.limit ? "yes" : "no");
-
- end:
- return 0;
-}
-
-static int acpi_processor_info_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_processor_info_seq_show,
- PDE(inode)->data);
-}
-
static int __cpuinit acpi_processor_add_fs(struct acpi_device *device)
{
struct proc_dir_entry *entry = NULL;
return -ENODEV;
}
- /* 'info' [R] */
- entry = proc_create_data(ACPI_PROCESSOR_FILE_INFO,
- S_IRUGO, acpi_device_dir(device),
- &acpi_processor_info_fops,
- acpi_driver_data(device));
- if (!entry)
- return -EIO;
-
/* 'throttling' [R/W] */
entry = proc_create_data(ACPI_PROCESSOR_FILE_THROTTLING,
S_IFREG | S_IRUGO | S_IWUSR,
acpi_driver_data(device));
if (!entry)
return -EIO;
-
- /* 'limit' [R/W] */
- entry = proc_create_data(ACPI_PROCESSOR_FILE_LIMIT,
- S_IFREG | S_IRUGO | S_IWUSR,
- acpi_device_dir(device),
- &acpi_processor_limit_fops,
- acpi_driver_data(device));
- if (!entry)
- return -EIO;
return 0;
}
static int acpi_processor_remove_fs(struct acpi_device *device)
{
if (acpi_device_dir(device)) {
- remove_proc_entry(ACPI_PROCESSOR_FILE_INFO,
- acpi_device_dir(device));
remove_proc_entry(ACPI_PROCESSOR_FILE_THROTTLING,
acpi_device_dir(device));
- remove_proc_entry(ACPI_PROCESSOR_FILE_LIMIT,
- acpi_device_dir(device));
remove_proc_entry(acpi_device_bid(device), acpi_processor_dir);
acpi_device_dir(device) = NULL;
}
return 0;
}
-#else
-static inline int acpi_processor_add_fs(struct acpi_device *device)
-{
- return 0;
-}
-static inline int acpi_processor_remove_fs(struct acpi_device *device)
-{
- return 0;
-}
-#endif
/* --------------------------------------------------------------------------
Driver Interface
memset(&errata, 0, sizeof(errata));
-#ifdef CONFIG_ACPI_PROCFS
acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
if (!acpi_processor_dir)
return -ENOMEM;
-#endif
if (!cpuidle_register_driver(&acpi_idle_driver)) {
printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n",
out_cpuidle:
cpuidle_unregister_driver(&acpi_idle_driver);
-#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
-#endif
return result;
}
cpuidle_unregister_driver(&acpi_idle_driver);
-#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
-#endif
return;
}
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <linux/moduleparam.h>
static unsigned int latency_factor __read_mostly = 2;
module_param(latency_factor, uint, 0644);
-#ifdef CONFIG_ACPI_PROCFS
-static u64 us_to_pm_timer_ticks(s64 t)
-{
- return div64_u64(t * PM_TIMER_FREQUENCY, 1000000);
-}
-#endif
-
/*
* IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
* For now disable this. Probably a bug somewhere else.
return 0;
}
-#ifdef CONFIG_ACPI_PROCFS
-static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_processor *pr = seq->private;
- unsigned int i;
-
-
- if (!pr)
- goto end;
-
- seq_printf(seq, "active state: C%zd\n"
- "max_cstate: C%d\n"
- "maximum allowed latency: %d usec\n",
- pr->power.state ? pr->power.state - pr->power.states : 0,
- max_cstate, pm_qos_request(PM_QOS_CPU_DMA_LATENCY));
-
- seq_puts(seq, "states:\n");
-
- for (i = 1; i <= pr->power.count; i++) {
- seq_printf(seq, " %cC%d: ",
- (&pr->power.states[i] ==
- pr->power.state ? '*' : ' '), i);
-
- if (!pr->power.states[i].valid) {
- seq_puts(seq, "<not supported>\n");
- continue;
- }
-
- switch (pr->power.states[i].type) {
- case ACPI_STATE_C1:
- seq_printf(seq, "type[C1] ");
- break;
- case ACPI_STATE_C2:
- seq_printf(seq, "type[C2] ");
- break;
- case ACPI_STATE_C3:
- seq_printf(seq, "type[C3] ");
- break;
- default:
- seq_printf(seq, "type[--] ");
- break;
- }
-
- seq_puts(seq, "promotion[--] ");
-
- seq_puts(seq, "demotion[--] ");
-
- seq_printf(seq, "latency[%03d] usage[%08d] duration[%020Lu]\n",
- pr->power.states[i].latency,
- pr->power.states[i].usage,
- us_to_pm_timer_ticks(pr->power.states[i].time));
- }
-
- end:
- return 0;
-}
-
-static int acpi_processor_power_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_processor_power_seq_show,
- PDE(inode)->data);
-}
-
-static const struct file_operations acpi_processor_power_fops = {
- .owner = THIS_MODULE,
- .open = acpi_processor_power_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-#endif
-
/**
* acpi_idle_bm_check - checks if bus master activity was detected
*/
} else if (cx->entry_method == ACPI_CSTATE_HALT) {
acpi_safe_halt();
} else {
- int unused;
/* IO port based C-state */
inb(cx->address);
/* Dummy wait op - must do something useless after P_LVL2 read
because chipsets cannot guarantee that STPCLK# signal
gets asserted in time to freeze execution properly. */
- unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ inl(acpi_gbl_FADT.xpm_timer_block.address);
}
start_critical_timings();
}
{
acpi_status status = 0;
static int first_run;
-#ifdef CONFIG_ACPI_PROCFS
- struct proc_dir_entry *entry = NULL;
-#endif
if (boot_option_idle_override)
return 0;
if (cpuidle_register_device(&pr->power.dev))
return -EIO;
}
-#ifdef CONFIG_ACPI_PROCFS
- /* 'power' [R] */
- entry = proc_create_data(ACPI_PROCESSOR_FILE_POWER,
- S_IRUGO, acpi_device_dir(device),
- &acpi_processor_power_fops,
- acpi_driver_data(device));
- if (!entry)
- return -EIO;
-#endif
return 0;
}
cpuidle_unregister_device(&pr->power.dev);
pr->flags.power_setup_done = 0;
-#ifdef CONFIG_ACPI_PROCFS
- if (acpi_device_dir(device))
- remove_proc_entry(ACPI_PROCESSOR_FILE_POWER,
- acpi_device_dir(device));
-#endif
-
return 0;
}
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
#include <linux/sysdev.h>
#include <asm/uaccess.h>
.get_cur_state = processor_get_cur_state,
.set_cur_state = processor_set_cur_state,
};
-
-/* /proc interface */
-#ifdef CONFIG_ACPI_PROCFS
-static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_processor *pr = seq->private;
-
- if (!pr)
- goto end;
-
- if (!pr->flags.limit) {
- seq_puts(seq, "<not supported>\n");
- goto end;
- }
-
- seq_printf(seq, "active limit: P%d:T%d\n"
- "user limit: P%d:T%d\n"
- "thermal limit: P%d:T%d\n",
- pr->limit.state.px, pr->limit.state.tx,
- pr->limit.user.px, pr->limit.user.tx,
- pr->limit.thermal.px, pr->limit.thermal.tx);
-
- end:
- return 0;
-}
-
-static int acpi_processor_limit_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_processor_limit_seq_show,
- PDE(inode)->data);
-}
-
-static ssize_t acpi_processor_write_limit(struct file * file,
- const char __user * buffer,
- size_t count, loff_t * data)
-{
- int result = 0;
- struct seq_file *m = file->private_data;
- struct acpi_processor *pr = m->private;
- char limit_string[25] = { '\0' };
- int px = 0;
- int tx = 0;
-
-
- if (!pr || (count > sizeof(limit_string) - 1)) {
- return -EINVAL;
- }
-
- if (copy_from_user(limit_string, buffer, count)) {
- return -EFAULT;
- }
-
- limit_string[count] = '\0';
-
- if (sscanf(limit_string, "%d:%d", &px, &tx) != 2) {
- printk(KERN_ERR PREFIX "Invalid data format\n");
- return -EINVAL;
- }
-
- if (pr->flags.throttling) {
- if ((tx < 0) || (tx > (pr->throttling.state_count - 1))) {
- printk(KERN_ERR PREFIX "Invalid tx\n");
- return -EINVAL;
- }
- pr->limit.user.tx = tx;
- }
-
- result = acpi_processor_apply_limit(pr);
-
- return count;
-}
-
-const struct file_operations acpi_processor_limit_fops = {
- .owner = THIS_MODULE,
- .open = acpi_processor_limit_open_fs,
- .read = seq_read,
- .write = acpi_processor_write_limit,
- .llseek = seq_lseek,
- .release = single_release,
-};
-#endif
}
/* proc interface */
-#ifdef CONFIG_ACPI_PROCFS
static int acpi_processor_throttling_seq_show(struct seq_file *seq,
void *offset)
{
.llseek = seq_lseek,
.release = single_release,
};
-#endif
}
ACPI_FLUSH_CPU_CACHE();
- acpi_enable_wakeup_device_prep(acpi_state);
#endif
printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
acpi_state);
+ acpi_enable_wakeup_devices(acpi_state);
acpi_enter_sleep_state_prep(acpi_state);
return 0;
}
return 0;
}
+/**
+ * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
+ */
+static int acpi_pm_pre_suspend(void)
+{
+ acpi_pm_freeze();
+ suspend_nvs_save();
+ return 0;
+}
+
/**
* __acpi_pm_prepare - Prepare the platform to enter the target state.
*
static int __acpi_pm_prepare(void)
{
int error = acpi_sleep_prepare(acpi_target_sleep_state);
-
- suspend_nvs_save();
-
if (error)
acpi_target_sleep_state = ACPI_STATE_S0;
+
return error;
}
static int acpi_pm_prepare(void)
{
int error = __acpi_pm_prepare();
-
if (!error)
- acpi_pm_freeze();
+ acpi_pm_pre_suspend();
return error;
}
{
u32 acpi_state = acpi_target_sleep_state;
- suspend_nvs_free();
acpi_ec_unblock_transactions();
if (acpi_state == ACPI_STATE_S0)
printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
acpi_state);
- acpi_disable_wakeup_device(acpi_state);
+ acpi_disable_wakeup_devices(acpi_state);
acpi_leave_sleep_state(acpi_state);
/* reset firmware waking vector */
*/
static void acpi_pm_end(void)
{
+ suspend_nvs_free();
/*
* This is necessary in case acpi_pm_finish() is not called during a
* failing transition to a sleep state.
}
local_irq_save(flags);
- acpi_enable_wakeup_device(acpi_state);
switch (acpi_state) {
case ACPI_STATE_S1:
barrier();
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
-static void acpi_suspend_finish(void)
-{
- acpi_pm_finish();
-}
-
static int acpi_suspend_state_valid(suspend_state_t pm_state)
{
u32 acpi_state;
.begin = acpi_suspend_begin,
.prepare_late = acpi_pm_prepare,
.enter = acpi_suspend_enter,
- .wake = acpi_suspend_finish,
+ .wake = acpi_pm_finish,
.end = acpi_pm_end,
};
static int acpi_suspend_begin_old(suspend_state_t pm_state)
{
int error = acpi_suspend_begin(pm_state);
-
if (!error)
error = __acpi_pm_prepare();
+
return error;
}
static struct platform_suspend_ops acpi_suspend_ops_old = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin_old,
- .prepare_late = acpi_pm_freeze,
+ .prepare_late = acpi_pm_pre_suspend,
.enter = acpi_suspend_enter,
- .wake = acpi_suspend_finish,
+ .wake = acpi_pm_finish,
.end = acpi_pm_end,
.recover = acpi_pm_finish,
};
return error;
}
-static int acpi_hibernation_pre_snapshot(void)
-{
- int error = acpi_pm_prepare();
-
- if (!error)
- suspend_nvs_save();
-
- return error;
-}
-
static int acpi_hibernation_enter(void)
{
acpi_status status = AE_OK;
ACPI_FLUSH_CPU_CACHE();
local_irq_save(flags);
- acpi_enable_wakeup_device(ACPI_STATE_S4);
/* This shouldn't return. If it returns, we have a problem */
status = acpi_enter_sleep_state(ACPI_STATE_S4);
/* Reprogram control registers and execute _BFS */
static struct platform_hibernation_ops acpi_hibernation_ops = {
.begin = acpi_hibernation_begin,
.end = acpi_pm_end,
- .pre_snapshot = acpi_hibernation_pre_snapshot,
+ .pre_snapshot = acpi_pm_prepare,
.finish = acpi_pm_finish,
.prepare = acpi_pm_prepare,
.enter = acpi_hibernation_enter,
return error;
}
-static int acpi_hibernation_pre_snapshot_old(void)
-{
- acpi_pm_freeze();
- suspend_nvs_save();
- return 0;
-}
-
/*
* The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
* been requested.
static struct platform_hibernation_ops acpi_hibernation_ops_old = {
.begin = acpi_hibernation_begin_old,
.end = acpi_pm_end,
- .pre_snapshot = acpi_hibernation_pre_snapshot_old,
+ .pre_snapshot = acpi_pm_pre_suspend,
.prepare = acpi_pm_freeze,
.finish = acpi_pm_finish,
.enter = acpi_hibernation_enter,
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
printk(KERN_DEBUG "%s called\n", __func__);
local_irq_disable();
- acpi_enable_wakeup_device(ACPI_STATE_S5);
acpi_enter_sleep_state(ACPI_STATE_S5);
}
extern u8 sleep_states[];
extern int acpi_suspend(u32 state);
-extern void acpi_enable_wakeup_device_prep(u8 sleep_state);
-extern void acpi_enable_wakeup_device(u8 sleep_state);
-extern void acpi_disable_wakeup_device(u8 sleep_state);
+extern void acpi_enable_wakeup_devices(u8 sleep_state);
+extern void acpi_disable_wakeup_devices(u8 sleep_state);
extern struct list_head acpi_wakeup_device_list;
extern struct mutex acpi_device_lock;
--- /dev/null
+/*
+ * sysfs.c - ACPI sysfs interface to userspace.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/moduleparam.h>
+#include <acpi/acpi_drivers.h>
+
+#define _COMPONENT ACPI_SYSTEM_COMPONENT
+ACPI_MODULE_NAME("sysfs");
+
+#define PREFIX "ACPI: "
+
+#ifdef CONFIG_ACPI_DEBUG
+/*
+ * ACPI debug sysfs I/F, including:
+ * /sys/modules/acpi/parameters/debug_layer
+ * /sys/modules/acpi/parameters/debug_level
+ * /sys/modules/acpi/parameters/trace_method_name
+ * /sys/modules/acpi/parameters/trace_state
+ * /sys/modules/acpi/parameters/trace_debug_layer
+ * /sys/modules/acpi/parameters/trace_debug_level
+ */
+
+struct acpi_dlayer {
+ const char *name;
+ unsigned long value;
+};
+struct acpi_dlevel {
+ const char *name;
+ unsigned long value;
+};
+#define ACPI_DEBUG_INIT(v) { .name = #v, .value = v }
+
+static const struct acpi_dlayer acpi_debug_layers[] = {
+ ACPI_DEBUG_INIT(ACPI_UTILITIES),
+ ACPI_DEBUG_INIT(ACPI_HARDWARE),
+ ACPI_DEBUG_INIT(ACPI_EVENTS),
+ ACPI_DEBUG_INIT(ACPI_TABLES),
+ ACPI_DEBUG_INIT(ACPI_NAMESPACE),
+ ACPI_DEBUG_INIT(ACPI_PARSER),
+ ACPI_DEBUG_INIT(ACPI_DISPATCHER),
+ ACPI_DEBUG_INIT(ACPI_EXECUTER),
+ ACPI_DEBUG_INIT(ACPI_RESOURCES),
+ ACPI_DEBUG_INIT(ACPI_CA_DEBUGGER),
+ ACPI_DEBUG_INIT(ACPI_OS_SERVICES),
+ ACPI_DEBUG_INIT(ACPI_CA_DISASSEMBLER),
+ ACPI_DEBUG_INIT(ACPI_COMPILER),
+ ACPI_DEBUG_INIT(ACPI_TOOLS),
+
+ ACPI_DEBUG_INIT(ACPI_BUS_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_AC_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_PCI_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_POWER_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT),
+};
+
+static const struct acpi_dlevel acpi_debug_levels[] = {
+ ACPI_DEBUG_INIT(ACPI_LV_INIT),
+ ACPI_DEBUG_INIT(ACPI_LV_DEBUG_OBJECT),
+ ACPI_DEBUG_INIT(ACPI_LV_INFO),
+
+ ACPI_DEBUG_INIT(ACPI_LV_INIT_NAMES),
+ ACPI_DEBUG_INIT(ACPI_LV_PARSE),
+ ACPI_DEBUG_INIT(ACPI_LV_LOAD),
+ ACPI_DEBUG_INIT(ACPI_LV_DISPATCH),
+ ACPI_DEBUG_INIT(ACPI_LV_EXEC),
+ ACPI_DEBUG_INIT(ACPI_LV_NAMES),
+ ACPI_DEBUG_INIT(ACPI_LV_OPREGION),
+ ACPI_DEBUG_INIT(ACPI_LV_BFIELD),
+ ACPI_DEBUG_INIT(ACPI_LV_TABLES),
+ ACPI_DEBUG_INIT(ACPI_LV_VALUES),
+ ACPI_DEBUG_INIT(ACPI_LV_OBJECTS),
+ ACPI_DEBUG_INIT(ACPI_LV_RESOURCES),
+ ACPI_DEBUG_INIT(ACPI_LV_USER_REQUESTS),
+ ACPI_DEBUG_INIT(ACPI_LV_PACKAGE),
+
+ ACPI_DEBUG_INIT(ACPI_LV_ALLOCATIONS),
+ ACPI_DEBUG_INIT(ACPI_LV_FUNCTIONS),
+ ACPI_DEBUG_INIT(ACPI_LV_OPTIMIZATIONS),
+
+ ACPI_DEBUG_INIT(ACPI_LV_MUTEX),
+ ACPI_DEBUG_INIT(ACPI_LV_THREADS),
+ ACPI_DEBUG_INIT(ACPI_LV_IO),
+ ACPI_DEBUG_INIT(ACPI_LV_INTERRUPTS),
+
+ ACPI_DEBUG_INIT(ACPI_LV_AML_DISASSEMBLE),
+ ACPI_DEBUG_INIT(ACPI_LV_VERBOSE_INFO),
+ ACPI_DEBUG_INIT(ACPI_LV_FULL_TABLES),
+ ACPI_DEBUG_INIT(ACPI_LV_EVENTS),
+};
+
+static int param_get_debug_layer(char *buffer, struct kernel_param *kp)
+{
+ int result = 0;
+ int i;
+
+ result = sprintf(buffer, "%-25s\tHex SET\n", "Description");
+
+ for (i = 0; i < ARRAY_SIZE(acpi_debug_layers); i++) {
+ result += sprintf(buffer + result, "%-25s\t0x%08lX [%c]\n",
+ acpi_debug_layers[i].name,
+ acpi_debug_layers[i].value,
+ (acpi_dbg_layer & acpi_debug_layers[i].value)
+ ? '*' : ' ');
+ }
+ result +=
+ sprintf(buffer + result, "%-25s\t0x%08X [%c]\n", "ACPI_ALL_DRIVERS",
+ ACPI_ALL_DRIVERS,
+ (acpi_dbg_layer & ACPI_ALL_DRIVERS) ==
+ ACPI_ALL_DRIVERS ? '*' : (acpi_dbg_layer & ACPI_ALL_DRIVERS)
+ == 0 ? ' ' : '-');
+ result +=
+ sprintf(buffer + result,
+ "--\ndebug_layer = 0x%08X ( * = enabled)\n",
+ acpi_dbg_layer);
+
+ return result;
+}
+
+static int param_get_debug_level(char *buffer, struct kernel_param *kp)
+{
+ int result = 0;
+ int i;
+
+ result = sprintf(buffer, "%-25s\tHex SET\n", "Description");
+
+ for (i = 0; i < ARRAY_SIZE(acpi_debug_levels); i++) {
+ result += sprintf(buffer + result, "%-25s\t0x%08lX [%c]\n",
+ acpi_debug_levels[i].name,
+ acpi_debug_levels[i].value,
+ (acpi_dbg_level & acpi_debug_levels[i].value)
+ ? '*' : ' ');
+ }
+ result +=
+ sprintf(buffer + result, "--\ndebug_level = 0x%08X (* = enabled)\n",
+ acpi_dbg_level);
+
+ return result;
+}
+
+module_param_call(debug_layer, param_set_uint, param_get_debug_layer,
+ &acpi_dbg_layer, 0644);
+module_param_call(debug_level, param_set_uint, param_get_debug_level,
+ &acpi_dbg_level, 0644);
+
+static char trace_method_name[6];
+module_param_string(trace_method_name, trace_method_name, 6, 0644);
+static unsigned int trace_debug_layer;
+module_param(trace_debug_layer, uint, 0644);
+static unsigned int trace_debug_level;
+module_param(trace_debug_level, uint, 0644);
+
+static int param_set_trace_state(const char *val, struct kernel_param *kp)
+{
+ int result = 0;
+
+ if (!strncmp(val, "enable", strlen("enable") - 1)) {
+ result = acpi_debug_trace(trace_method_name, trace_debug_level,
+ trace_debug_layer, 0);
+ if (result)
+ result = -EBUSY;
+ goto exit;
+ }
+
+ if (!strncmp(val, "disable", strlen("disable") - 1)) {
+ int name = 0;
+ result = acpi_debug_trace((char *)&name, trace_debug_level,
+ trace_debug_layer, 0);
+ if (result)
+ result = -EBUSY;
+ goto exit;
+ }
+
+ if (!strncmp(val, "1", 1)) {
+ result = acpi_debug_trace(trace_method_name, trace_debug_level,
+ trace_debug_layer, 1);
+ if (result)
+ result = -EBUSY;
+ goto exit;
+ }
+
+ result = -EINVAL;
+exit:
+ return result;
+}
+
+static int param_get_trace_state(char *buffer, struct kernel_param *kp)
+{
+ if (!acpi_gbl_trace_method_name)
+ return sprintf(buffer, "disable");
+ else {
+ if (acpi_gbl_trace_flags & 1)
+ return sprintf(buffer, "1");
+ else
+ return sprintf(buffer, "enable");
+ }
+ return 0;
+}
+
+module_param_call(trace_state, param_set_trace_state, param_get_trace_state,
+ NULL, 0644);
+#endif /* CONFIG_ACPI_DEBUG */
+
+/* /sys/module/acpi/parameters/acpica_version */
+static int param_get_acpica_version(char *buffer, struct kernel_param *kp)
+{
+ int result;
+
+ result = sprintf(buffer, "%x", ACPI_CA_VERSION);
+
+ return result;
+}
+
+module_param_call(acpica_version, NULL, param_get_acpica_version, NULL, 0444);
+
+/*
+ * ACPI table sysfs I/F:
+ * /sys/firmware/acpi/tables/
+ * /sys/firmware/acpi/tables/dynamic/
+ */
+
+static LIST_HEAD(acpi_table_attr_list);
+static struct kobject *tables_kobj;
+static struct kobject *dynamic_tables_kobj;
+
+struct acpi_table_attr {
+ struct bin_attribute attr;
+ char name[8];
+ int instance;
+ struct list_head node;
+};
+
+static ssize_t acpi_table_show(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t offset, size_t count)
+{
+ struct acpi_table_attr *table_attr =
+ container_of(bin_attr, struct acpi_table_attr, attr);
+ struct acpi_table_header *table_header = NULL;
+ acpi_status status;
+ char name[ACPI_NAME_SIZE];
+
+ if (strncmp(table_attr->name, "NULL", 4))
+ memcpy(name, table_attr->name, ACPI_NAME_SIZE);
+ else
+ memcpy(name, "\0\0\0\0", 4);
+
+ status = acpi_get_table(name, table_attr->instance, &table_header);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ return memory_read_from_buffer(buf, count, &offset,
+ table_header, table_header->length);
+}
+
+static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
+ struct acpi_table_header *table_header)
+{
+ struct acpi_table_header *header = NULL;
+ struct acpi_table_attr *attr = NULL;
+
+ sysfs_attr_init(&table_attr->attr.attr);
+ if (table_header->signature[0] != '\0')
+ memcpy(table_attr->name, table_header->signature,
+ ACPI_NAME_SIZE);
+ else
+ memcpy(table_attr->name, "NULL", 4);
+
+ list_for_each_entry(attr, &acpi_table_attr_list, node) {
+ if (!memcmp(table_attr->name, attr->name, ACPI_NAME_SIZE))
+ if (table_attr->instance < attr->instance)
+ table_attr->instance = attr->instance;
+ }
+ table_attr->instance++;
+
+ if (table_attr->instance > 1 || (table_attr->instance == 1 &&
+ !acpi_get_table
+ (table_header->signature, 2, &header)))
+ sprintf(table_attr->name + ACPI_NAME_SIZE, "%d",
+ table_attr->instance);
+
+ table_attr->attr.size = 0;
+ table_attr->attr.read = acpi_table_show;
+ table_attr->attr.attr.name = table_attr->name;
+ table_attr->attr.attr.mode = 0400;
+
+ return;
+}
+
+static acpi_status
+acpi_sysfs_table_handler(u32 event, void *table, void *context)
+{
+ struct acpi_table_attr *table_attr;
+
+ switch (event) {
+ case ACPI_TABLE_EVENT_LOAD:
+ table_attr =
+ kzalloc(sizeof(struct acpi_table_attr), GFP_KERNEL);
+ if (!table_attr)
+ return AE_NO_MEMORY;
+
+ acpi_table_attr_init(table_attr, table);
+ if (sysfs_create_bin_file(dynamic_tables_kobj,
+ &table_attr->attr)) {
+ kfree(table_attr);
+ return AE_ERROR;
+ } else
+ list_add_tail(&table_attr->node, &acpi_table_attr_list);
+ break;
+ case ACPI_TABLE_EVENT_UNLOAD:
+ /*
+ * we do not need to do anything right now
+ * because the table is not deleted from the
+ * global table list when unloading it.
+ */
+ break;
+ default:
+ return AE_BAD_PARAMETER;
+ }
+ return AE_OK;
+}
+
+static int acpi_tables_sysfs_init(void)
+{
+ struct acpi_table_attr *table_attr;
+ struct acpi_table_header *table_header = NULL;
+ int table_index = 0;
+ int result;
+
+ tables_kobj = kobject_create_and_add("tables", acpi_kobj);
+ if (!tables_kobj)
+ goto err;
+
+ dynamic_tables_kobj = kobject_create_and_add("dynamic", tables_kobj);
+ if (!dynamic_tables_kobj)
+ goto err_dynamic_tables;
+
+ do {
+ result = acpi_get_table_by_index(table_index, &table_header);
+ if (!result) {
+ table_index++;
+ table_attr = NULL;
+ table_attr =
+ kzalloc(sizeof(struct acpi_table_attr), GFP_KERNEL);
+ if (!table_attr)
+ return -ENOMEM;
+
+ acpi_table_attr_init(table_attr, table_header);
+ result =
+ sysfs_create_bin_file(tables_kobj,
+ &table_attr->attr);
+ if (result) {
+ kfree(table_attr);
+ return result;
+ } else
+ list_add_tail(&table_attr->node,
+ &acpi_table_attr_list);
+ }
+ } while (!result);
+ kobject_uevent(tables_kobj, KOBJ_ADD);
+ kobject_uevent(dynamic_tables_kobj, KOBJ_ADD);
+ result = acpi_install_table_handler(acpi_sysfs_table_handler, NULL);
+
+ return result == AE_OK ? 0 : -EINVAL;
+err_dynamic_tables:
+ kobject_put(tables_kobj);
+err:
+ return -ENOMEM;
+}
+
+/*
+ * Detailed ACPI IRQ counters:
+ * /sys/firmware/acpi/interrupts/
+ */
+
+u32 acpi_irq_handled;
+u32 acpi_irq_not_handled;
+
+#define COUNT_GPE 0
+#define COUNT_SCI 1 /* acpi_irq_handled */
+#define COUNT_SCI_NOT 2 /* acpi_irq_not_handled */
+#define COUNT_ERROR 3 /* other */
+#define NUM_COUNTERS_EXTRA 4
+
+struct event_counter {
+ u32 count;
+ u32 flags;
+};
+
+static struct event_counter *all_counters;
+static u32 num_gpes;
+static u32 num_counters;
+static struct attribute **all_attrs;
+static u32 acpi_gpe_count;
+
+static struct attribute_group interrupt_stats_attr_group = {
+ .name = "interrupts",
+};
+
+static struct kobj_attribute *counter_attrs;
+
+static void delete_gpe_attr_array(void)
+{
+ struct event_counter *tmp = all_counters;
+
+ all_counters = NULL;
+ kfree(tmp);
+
+ if (counter_attrs) {
+ int i;
+
+ for (i = 0; i < num_gpes; i++)
+ kfree(counter_attrs[i].attr.name);
+
+ kfree(counter_attrs);
+ }
+ kfree(all_attrs);
+
+ return;
+}
+
+void acpi_os_gpe_count(u32 gpe_number)
+{
+ acpi_gpe_count++;
+
+ if (!all_counters)
+ return;
+
+ if (gpe_number < num_gpes)
+ all_counters[gpe_number].count++;
+ else
+ all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS +
+ COUNT_ERROR].count++;
+
+ return;
+}
+
+void acpi_os_fixed_event_count(u32 event_number)
+{
+ if (!all_counters)
+ return;
+
+ if (event_number < ACPI_NUM_FIXED_EVENTS)
+ all_counters[num_gpes + event_number].count++;
+ else
+ all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS +
+ COUNT_ERROR].count++;
+
+ return;
+}
+
+static int get_status(u32 index, acpi_event_status *status,
+ acpi_handle *handle)
+{
+ int result = 0;
+
+ if (index >= num_gpes + ACPI_NUM_FIXED_EVENTS)
+ goto end;
+
+ if (index < num_gpes) {
+ result = acpi_get_gpe_device(index, handle);
+ if (result) {
+ ACPI_EXCEPTION((AE_INFO, AE_NOT_FOUND,
+ "Invalid GPE 0x%x\n", index));
+ goto end;
+ }
+ result = acpi_get_gpe_status(*handle, index, status);
+ } else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS))
+ result = acpi_get_event_status(index - num_gpes, status);
+
+end:
+ return result;
+}
+
+static ssize_t counter_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ int index = attr - counter_attrs;
+ int size;
+ acpi_handle handle;
+ acpi_event_status status;
+ int result = 0;
+
+ all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI].count =
+ acpi_irq_handled;
+ all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT].count =
+ acpi_irq_not_handled;
+ all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE].count =
+ acpi_gpe_count;
+ size = sprintf(buf, "%8d", all_counters[index].count);
+
+ /* "gpe_all" or "sci" */
+ if (index >= num_gpes + ACPI_NUM_FIXED_EVENTS)
+ goto end;
+
+ result = get_status(index, &status, &handle);
+ if (result)
+ goto end;
+
+ if (!(status & ACPI_EVENT_FLAG_HANDLE))
+ size += sprintf(buf + size, " invalid");
+ else if (status & ACPI_EVENT_FLAG_ENABLED)
+ size += sprintf(buf + size, " enabled");
+ else if (status & ACPI_EVENT_FLAG_WAKE_ENABLED)
+ size += sprintf(buf + size, " wake_enabled");
+ else
+ size += sprintf(buf + size, " disabled");
+
+end:
+ size += sprintf(buf + size, "\n");
+ return result ? result : size;
+}
+
+/*
+ * counter_set() sets the specified counter.
+ * setting the total "sci" file to any value clears all counters.
+ * enable/disable/clear a gpe/fixed event in user space.
+ */
+static ssize_t counter_set(struct kobject *kobj,
+ struct kobj_attribute *attr, const char *buf,
+ size_t size)
+{
+ int index = attr - counter_attrs;
+ acpi_event_status status;
+ acpi_handle handle;
+ int result = 0;
+
+ if (index == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI) {
+ int i;
+ for (i = 0; i < num_counters; ++i)
+ all_counters[i].count = 0;
+ acpi_gpe_count = 0;
+ acpi_irq_handled = 0;
+ acpi_irq_not_handled = 0;
+ goto end;
+ }
+
+ /* show the event status for both GPEs and Fixed Events */
+ result = get_status(index, &status, &handle);
+ if (result)
+ goto end;
+
+ if (!(status & ACPI_EVENT_FLAG_HANDLE)) {
+ printk(KERN_WARNING PREFIX
+ "Can not change Invalid GPE/Fixed Event status\n");
+ return -EINVAL;
+ }
+
+ if (index < num_gpes) {
+ if (!strcmp(buf, "disable\n") &&
+ (status & ACPI_EVENT_FLAG_ENABLED))
+ result = acpi_disable_gpe(handle, index);
+ else if (!strcmp(buf, "enable\n") &&
+ !(status & ACPI_EVENT_FLAG_ENABLED))
+ result = acpi_enable_gpe(handle, index);
+ else if (!strcmp(buf, "clear\n") &&
+ (status & ACPI_EVENT_FLAG_SET))
+ result = acpi_clear_gpe(handle, index);
+ else
+ all_counters[index].count = strtoul(buf, NULL, 0);
+ } else if (index < num_gpes + ACPI_NUM_FIXED_EVENTS) {
+ int event = index - num_gpes;
+ if (!strcmp(buf, "disable\n") &&
+ (status & ACPI_EVENT_FLAG_ENABLED))
+ result = acpi_disable_event(event, ACPI_NOT_ISR);
+ else if (!strcmp(buf, "enable\n") &&
+ !(status & ACPI_EVENT_FLAG_ENABLED))
+ result = acpi_enable_event(event, ACPI_NOT_ISR);
+ else if (!strcmp(buf, "clear\n") &&
+ (status & ACPI_EVENT_FLAG_SET))
+ result = acpi_clear_event(event);
+ else
+ all_counters[index].count = strtoul(buf, NULL, 0);
+ } else
+ all_counters[index].count = strtoul(buf, NULL, 0);
+
+ if (ACPI_FAILURE(result))
+ result = -EINVAL;
+end:
+ return result ? result : size;
+}
+
+void acpi_irq_stats_init(void)
+{
+ int i;
+
+ if (all_counters)
+ return;
+
+ num_gpes = acpi_current_gpe_count;
+ num_counters = num_gpes + ACPI_NUM_FIXED_EVENTS + NUM_COUNTERS_EXTRA;
+
+ all_attrs = kzalloc(sizeof(struct attribute *) * (num_counters + 1),
+ GFP_KERNEL);
+ if (all_attrs == NULL)
+ return;
+
+ all_counters = kzalloc(sizeof(struct event_counter) * (num_counters),
+ GFP_KERNEL);
+ if (all_counters == NULL)
+ goto fail;
+
+ counter_attrs = kzalloc(sizeof(struct kobj_attribute) * (num_counters),
+ GFP_KERNEL);
+ if (counter_attrs == NULL)
+ goto fail;
+
+ for (i = 0; i < num_counters; ++i) {
+ char buffer[12];
+ char *name;
+
+ if (i < num_gpes)
+ sprintf(buffer, "gpe%02X", i);
+ else if (i == num_gpes + ACPI_EVENT_PMTIMER)
+ sprintf(buffer, "ff_pmtimer");
+ else if (i == num_gpes + ACPI_EVENT_GLOBAL)
+ sprintf(buffer, "ff_gbl_lock");
+ else if (i == num_gpes + ACPI_EVENT_POWER_BUTTON)
+ sprintf(buffer, "ff_pwr_btn");
+ else if (i == num_gpes + ACPI_EVENT_SLEEP_BUTTON)
+ sprintf(buffer, "ff_slp_btn");
+ else if (i == num_gpes + ACPI_EVENT_RTC)
+ sprintf(buffer, "ff_rt_clk");
+ else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE)
+ sprintf(buffer, "gpe_all");
+ else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI)
+ sprintf(buffer, "sci");
+ else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT)
+ sprintf(buffer, "sci_not");
+ else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR)
+ sprintf(buffer, "error");
+ else
+ sprintf(buffer, "bug%02X", i);
+
+ name = kzalloc(strlen(buffer) + 1, GFP_KERNEL);
+ if (name == NULL)
+ goto fail;
+ strncpy(name, buffer, strlen(buffer) + 1);
+
+ sysfs_attr_init(&counter_attrs[i].attr);
+ counter_attrs[i].attr.name = name;
+ counter_attrs[i].attr.mode = 0644;
+ counter_attrs[i].show = counter_show;
+ counter_attrs[i].store = counter_set;
+
+ all_attrs[i] = &counter_attrs[i].attr;
+ }
+
+ interrupt_stats_attr_group.attrs = all_attrs;
+ if (!sysfs_create_group(acpi_kobj, &interrupt_stats_attr_group))
+ return;
+
+fail:
+ delete_gpe_attr_array();
+ return;
+}
+
+static void __exit interrupt_stats_exit(void)
+{
+ sysfs_remove_group(acpi_kobj, &interrupt_stats_attr_group);
+
+ delete_gpe_attr_array();
+
+ return;
+}
+
+int __init acpi_sysfs_init(void)
+{
+ int result;
+
+ result = acpi_tables_sysfs_init();
+
+ return result;
+}
+++ /dev/null
-/*
- * acpi_system.c - ACPI System Driver ($Revision: 63 $)
- *
- * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
- * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <asm/uaccess.h>
-
-#include <acpi/acpi_drivers.h>
-
-#define PREFIX "ACPI: "
-
-#define _COMPONENT ACPI_SYSTEM_COMPONENT
-ACPI_MODULE_NAME("system");
-
-#define ACPI_SYSTEM_CLASS "system"
-#define ACPI_SYSTEM_DEVICE_NAME "System"
-
-u32 acpi_irq_handled;
-u32 acpi_irq_not_handled;
-
-/*
- * Make ACPICA version work as module param
- */
-static int param_get_acpica_version(char *buffer, struct kernel_param *kp)
-{
- int result;
-
- result = sprintf(buffer, "%x", ACPI_CA_VERSION);
-
- return result;
-}
-
-module_param_call(acpica_version, NULL, param_get_acpica_version, NULL, 0444);
-
-/* --------------------------------------------------------------------------
- FS Interface (/sys)
- -------------------------------------------------------------------------- */
-static LIST_HEAD(acpi_table_attr_list);
-static struct kobject *tables_kobj;
-static struct kobject *dynamic_tables_kobj;
-
-struct acpi_table_attr {
- struct bin_attribute attr;
- char name[8];
- int instance;
- struct list_head node;
-};
-
-static ssize_t acpi_table_show(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf,
- loff_t offset, size_t count)
-{
- struct acpi_table_attr *table_attr =
- container_of(bin_attr, struct acpi_table_attr, attr);
- struct acpi_table_header *table_header = NULL;
- acpi_status status;
- char name[ACPI_NAME_SIZE];
-
- if (strncmp(table_attr->name, "NULL", 4))
- memcpy(name, table_attr->name, ACPI_NAME_SIZE);
- else
- memcpy(name, "\0\0\0\0", 4);
-
- status =
- acpi_get_table(name, table_attr->instance,
- &table_header);
- if (ACPI_FAILURE(status))
- return -ENODEV;
-
- return memory_read_from_buffer(buf, count, &offset,
- table_header, table_header->length);
-}
-
-static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
- struct acpi_table_header *table_header)
-{
- struct acpi_table_header *header = NULL;
- struct acpi_table_attr *attr = NULL;
-
- sysfs_attr_init(&table_attr->attr.attr);
- if (table_header->signature[0] != '\0')
- memcpy(table_attr->name, table_header->signature,
- ACPI_NAME_SIZE);
- else
- memcpy(table_attr->name, "NULL", 4);
-
- list_for_each_entry(attr, &acpi_table_attr_list, node) {
- if (!memcmp(table_attr->name, attr->name, ACPI_NAME_SIZE))
- if (table_attr->instance < attr->instance)
- table_attr->instance = attr->instance;
- }
- table_attr->instance++;
-
- if (table_attr->instance > 1 || (table_attr->instance == 1 &&
- !acpi_get_table
- (table_header->signature, 2, &header)))
- sprintf(table_attr->name + ACPI_NAME_SIZE, "%d",
- table_attr->instance);
-
- table_attr->attr.size = 0;
- table_attr->attr.read = acpi_table_show;
- table_attr->attr.attr.name = table_attr->name;
- table_attr->attr.attr.mode = 0400;
-
- return;
-}
-
-static acpi_status
-acpi_sysfs_table_handler(u32 event, void *table, void *context)
-{
- struct acpi_table_attr *table_attr;
-
- switch (event) {
- case ACPI_TABLE_EVENT_LOAD:
- table_attr =
- kzalloc(sizeof(struct acpi_table_attr), GFP_KERNEL);
- if (!table_attr)
- return AE_NO_MEMORY;
-
- acpi_table_attr_init(table_attr, table);
- if (sysfs_create_bin_file(dynamic_tables_kobj,
- &table_attr->attr)) {
- kfree(table_attr);
- return AE_ERROR;
- } else
- list_add_tail(&table_attr->node,
- &acpi_table_attr_list);
- break;
- case ACPI_TABLE_EVENT_UNLOAD:
- /*
- * we do not need to do anything right now
- * because the table is not deleted from the
- * global table list when unloading it.
- */
- break;
- default:
- return AE_BAD_PARAMETER;
- }
- return AE_OK;
-}
-
-static int acpi_system_sysfs_init(void)
-{
- struct acpi_table_attr *table_attr;
- struct acpi_table_header *table_header = NULL;
- int table_index = 0;
- int result;
-
- tables_kobj = kobject_create_and_add("tables", acpi_kobj);
- if (!tables_kobj)
- goto err;
-
- dynamic_tables_kobj = kobject_create_and_add("dynamic", tables_kobj);
- if (!dynamic_tables_kobj)
- goto err_dynamic_tables;
-
- do {
- result = acpi_get_table_by_index(table_index, &table_header);
- if (!result) {
- table_index++;
- table_attr = NULL;
- table_attr =
- kzalloc(sizeof(struct acpi_table_attr), GFP_KERNEL);
- if (!table_attr)
- return -ENOMEM;
-
- acpi_table_attr_init(table_attr, table_header);
- result =
- sysfs_create_bin_file(tables_kobj,
- &table_attr->attr);
- if (result) {
- kfree(table_attr);
- return result;
- } else
- list_add_tail(&table_attr->node,
- &acpi_table_attr_list);
- }
- } while (!result);
- kobject_uevent(tables_kobj, KOBJ_ADD);
- kobject_uevent(dynamic_tables_kobj, KOBJ_ADD);
- result = acpi_install_table_handler(acpi_sysfs_table_handler, NULL);
-
- return result == AE_OK ? 0 : -EINVAL;
-err_dynamic_tables:
- kobject_put(tables_kobj);
-err:
- return -ENOMEM;
-}
-
-/*
- * Detailed ACPI IRQ counters in /sys/firmware/acpi/interrupts/
- * See Documentation/ABI/testing/sysfs-firmware-acpi
- */
-
-#define COUNT_GPE 0
-#define COUNT_SCI 1 /* acpi_irq_handled */
-#define COUNT_SCI_NOT 2 /* acpi_irq_not_handled */
-#define COUNT_ERROR 3 /* other */
-#define NUM_COUNTERS_EXTRA 4
-
-struct event_counter {
- u32 count;
- u32 flags;
-};
-
-static struct event_counter *all_counters;
-static u32 num_gpes;
-static u32 num_counters;
-static struct attribute **all_attrs;
-static u32 acpi_gpe_count;
-
-static struct attribute_group interrupt_stats_attr_group = {
- .name = "interrupts",
-};
-static struct kobj_attribute *counter_attrs;
-
-static void delete_gpe_attr_array(void)
-{
- struct event_counter *tmp = all_counters;
-
- all_counters = NULL;
- kfree(tmp);
-
- if (counter_attrs) {
- int i;
-
- for (i = 0; i < num_gpes; i++)
- kfree(counter_attrs[i].attr.name);
-
- kfree(counter_attrs);
- }
- kfree(all_attrs);
-
- return;
-}
-
-void acpi_os_gpe_count(u32 gpe_number)
-{
- acpi_gpe_count++;
-
- if (!all_counters)
- return;
-
- if (gpe_number < num_gpes)
- all_counters[gpe_number].count++;
- else
- all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR].
- count++;
-
- return;
-}
-
-void acpi_os_fixed_event_count(u32 event_number)
-{
- if (!all_counters)
- return;
-
- if (event_number < ACPI_NUM_FIXED_EVENTS)
- all_counters[num_gpes + event_number].count++;
- else
- all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR].
- count++;
-
- return;
-}
-
-static int get_status(u32 index, acpi_event_status *status, acpi_handle *handle)
-{
- int result = 0;
-
- if (index >= num_gpes + ACPI_NUM_FIXED_EVENTS)
- goto end;
-
- if (index < num_gpes) {
- result = acpi_get_gpe_device(index, handle);
- if (result) {
- ACPI_EXCEPTION((AE_INFO, AE_NOT_FOUND,
- "Invalid GPE 0x%x\n", index));
- goto end;
- }
- result = acpi_get_gpe_status(*handle, index, status);
- } else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS))
- result = acpi_get_event_status(index - num_gpes, status);
-
-end:
- return result;
-}
-
-static ssize_t counter_show(struct kobject *kobj,
- struct kobj_attribute *attr, char *buf)
-{
- int index = attr - counter_attrs;
- int size;
- acpi_handle handle;
- acpi_event_status status;
- int result = 0;
-
- all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI].count =
- acpi_irq_handled;
- all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT].count =
- acpi_irq_not_handled;
- all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE].count =
- acpi_gpe_count;
-
- size = sprintf(buf, "%8d", all_counters[index].count);
-
- /* "gpe_all" or "sci" */
- if (index >= num_gpes + ACPI_NUM_FIXED_EVENTS)
- goto end;
-
- result = get_status(index, &status, &handle);
- if (result)
- goto end;
-
- if (!(status & ACPI_EVENT_FLAG_HANDLE))
- size += sprintf(buf + size, " invalid");
- else if (status & ACPI_EVENT_FLAG_ENABLED)
- size += sprintf(buf + size, " enabled");
- else if (status & ACPI_EVENT_FLAG_WAKE_ENABLED)
- size += sprintf(buf + size, " wake_enabled");
- else
- size += sprintf(buf + size, " disabled");
-
-end:
- size += sprintf(buf + size, "\n");
- return result ? result : size;
-}
-
-/*
- * counter_set() sets the specified counter.
- * setting the total "sci" file to any value clears all counters.
- * enable/disable/clear a gpe/fixed event in user space.
- */
-static ssize_t counter_set(struct kobject *kobj,
- struct kobj_attribute *attr, const char *buf, size_t size)
-{
- int index = attr - counter_attrs;
- acpi_event_status status;
- acpi_handle handle;
- int result = 0;
-
- if (index == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI) {
- int i;
- for (i = 0; i < num_counters; ++i)
- all_counters[i].count = 0;
- acpi_gpe_count = 0;
- acpi_irq_handled = 0;
- acpi_irq_not_handled = 0;
- goto end;
- }
-
- /* show the event status for both GPEs and Fixed Events */
- result = get_status(index, &status, &handle);
- if (result)
- goto end;
-
- if (!(status & ACPI_EVENT_FLAG_HANDLE)) {
- printk(KERN_WARNING PREFIX
- "Can not change Invalid GPE/Fixed Event status\n");
- return -EINVAL;
- }
-
- if (index < num_gpes) {
- if (!strcmp(buf, "disable\n") &&
- (status & ACPI_EVENT_FLAG_ENABLED))
- result = acpi_disable_gpe(handle, index);
- else if (!strcmp(buf, "enable\n") &&
- !(status & ACPI_EVENT_FLAG_ENABLED))
- result = acpi_enable_gpe(handle, index);
- else if (!strcmp(buf, "clear\n") &&
- (status & ACPI_EVENT_FLAG_SET))
- result = acpi_clear_gpe(handle, index);
- else
- all_counters[index].count = strtoul(buf, NULL, 0);
- } else if (index < num_gpes + ACPI_NUM_FIXED_EVENTS) {
- int event = index - num_gpes;
- if (!strcmp(buf, "disable\n") &&
- (status & ACPI_EVENT_FLAG_ENABLED))
- result = acpi_disable_event(event, ACPI_NOT_ISR);
- else if (!strcmp(buf, "enable\n") &&
- !(status & ACPI_EVENT_FLAG_ENABLED))
- result = acpi_enable_event(event, ACPI_NOT_ISR);
- else if (!strcmp(buf, "clear\n") &&
- (status & ACPI_EVENT_FLAG_SET))
- result = acpi_clear_event(event);
- else
- all_counters[index].count = strtoul(buf, NULL, 0);
- } else
- all_counters[index].count = strtoul(buf, NULL, 0);
-
- if (ACPI_FAILURE(result))
- result = -EINVAL;
-end:
- return result ? result : size;
-}
-
-void acpi_irq_stats_init(void)
-{
- int i;
-
- if (all_counters)
- return;
-
- num_gpes = acpi_current_gpe_count;
- num_counters = num_gpes + ACPI_NUM_FIXED_EVENTS + NUM_COUNTERS_EXTRA;
-
- all_attrs = kzalloc(sizeof(struct attribute *) * (num_counters + 1),
- GFP_KERNEL);
- if (all_attrs == NULL)
- return;
-
- all_counters = kzalloc(sizeof(struct event_counter) * (num_counters),
- GFP_KERNEL);
- if (all_counters == NULL)
- goto fail;
-
- counter_attrs = kzalloc(sizeof(struct kobj_attribute) * (num_counters),
- GFP_KERNEL);
- if (counter_attrs == NULL)
- goto fail;
-
- for (i = 0; i < num_counters; ++i) {
- char buffer[12];
- char *name;
-
- if (i < num_gpes)
- sprintf(buffer, "gpe%02X", i);
- else if (i == num_gpes + ACPI_EVENT_PMTIMER)
- sprintf(buffer, "ff_pmtimer");
- else if (i == num_gpes + ACPI_EVENT_GLOBAL)
- sprintf(buffer, "ff_gbl_lock");
- else if (i == num_gpes + ACPI_EVENT_POWER_BUTTON)
- sprintf(buffer, "ff_pwr_btn");
- else if (i == num_gpes + ACPI_EVENT_SLEEP_BUTTON)
- sprintf(buffer, "ff_slp_btn");
- else if (i == num_gpes + ACPI_EVENT_RTC)
- sprintf(buffer, "ff_rt_clk");
- else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE)
- sprintf(buffer, "gpe_all");
- else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI)
- sprintf(buffer, "sci");
- else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT)
- sprintf(buffer, "sci_not");
- else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR)
- sprintf(buffer, "error");
- else
- sprintf(buffer, "bug%02X", i);
-
- name = kzalloc(strlen(buffer) + 1, GFP_KERNEL);
- if (name == NULL)
- goto fail;
- strncpy(name, buffer, strlen(buffer) + 1);
-
- sysfs_attr_init(&counter_attrs[i].attr);
- counter_attrs[i].attr.name = name;
- counter_attrs[i].attr.mode = 0644;
- counter_attrs[i].show = counter_show;
- counter_attrs[i].store = counter_set;
-
- all_attrs[i] = &counter_attrs[i].attr;
- }
-
- interrupt_stats_attr_group.attrs = all_attrs;
- if (!sysfs_create_group(acpi_kobj, &interrupt_stats_attr_group))
- return;
-
-fail:
- delete_gpe_attr_array();
- return;
-}
-
-static void __exit interrupt_stats_exit(void)
-{
- sysfs_remove_group(acpi_kobj, &interrupt_stats_attr_group);
-
- delete_gpe_attr_array();
-
- return;
-}
-
-/* --------------------------------------------------------------------------
- FS Interface (/proc)
- -------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_PROCFS
-#define ACPI_SYSTEM_FILE_INFO "info"
-#define ACPI_SYSTEM_FILE_EVENT "event"
-#define ACPI_SYSTEM_FILE_DSDT "dsdt"
-#define ACPI_SYSTEM_FILE_FADT "fadt"
-
-static int acpi_system_read_info(struct seq_file *seq, void *offset)
-{
-
- seq_printf(seq, "version: %x\n", ACPI_CA_VERSION);
- return 0;
-}
-
-static int acpi_system_info_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_system_read_info, PDE(inode)->data);
-}
-
-static const struct file_operations acpi_system_info_ops = {
- .owner = THIS_MODULE,
- .open = acpi_system_info_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static ssize_t acpi_system_read_dsdt(struct file *, char __user *, size_t,
- loff_t *);
-
-static const struct file_operations acpi_system_dsdt_ops = {
- .owner = THIS_MODULE,
- .read = acpi_system_read_dsdt,
-};
-
-static ssize_t
-acpi_system_read_dsdt(struct file *file,
- char __user * buffer, size_t count, loff_t * ppos)
-{
- acpi_status status = AE_OK;
- struct acpi_table_header *dsdt = NULL;
- ssize_t res;
-
- status = acpi_get_table(ACPI_SIG_DSDT, 1, &dsdt);
- if (ACPI_FAILURE(status))
- return -ENODEV;
-
- res = simple_read_from_buffer(buffer, count, ppos, dsdt, dsdt->length);
-
- return res;
-}
-
-static ssize_t acpi_system_read_fadt(struct file *, char __user *, size_t,
- loff_t *);
-
-static const struct file_operations acpi_system_fadt_ops = {
- .owner = THIS_MODULE,
- .read = acpi_system_read_fadt,
-};
-
-static ssize_t
-acpi_system_read_fadt(struct file *file,
- char __user * buffer, size_t count, loff_t * ppos)
-{
- acpi_status status = AE_OK;
- struct acpi_table_header *fadt = NULL;
- ssize_t res;
-
- status = acpi_get_table(ACPI_SIG_FADT, 1, &fadt);
- if (ACPI_FAILURE(status))
- return -ENODEV;
-
- res = simple_read_from_buffer(buffer, count, ppos, fadt, fadt->length);
-
- return res;
-}
-
-static int acpi_system_procfs_init(void)
-{
- struct proc_dir_entry *entry;
- int error = 0;
-
- /* 'info' [R] */
- entry = proc_create(ACPI_SYSTEM_FILE_INFO, S_IRUGO, acpi_root_dir,
- &acpi_system_info_ops);
- if (!entry)
- goto Error;
-
- /* 'dsdt' [R] */
- entry = proc_create(ACPI_SYSTEM_FILE_DSDT, S_IRUSR, acpi_root_dir,
- &acpi_system_dsdt_ops);
- if (!entry)
- goto Error;
-
- /* 'fadt' [R] */
- entry = proc_create(ACPI_SYSTEM_FILE_FADT, S_IRUSR, acpi_root_dir,
- &acpi_system_fadt_ops);
- if (!entry)
- goto Error;
-
- Done:
- return error;
-
- Error:
- remove_proc_entry(ACPI_SYSTEM_FILE_FADT, acpi_root_dir);
- remove_proc_entry(ACPI_SYSTEM_FILE_DSDT, acpi_root_dir);
- remove_proc_entry(ACPI_SYSTEM_FILE_INFO, acpi_root_dir);
-
- error = -EFAULT;
- goto Done;
-}
-#else
-static int acpi_system_procfs_init(void)
-{
- return 0;
-}
-#endif
-
-int __init acpi_system_init(void)
-{
- int result;
-
- result = acpi_system_procfs_init();
- if (result)
- return result;
-
- result = acpi_system_sysfs_init();
-
- return result;
-}
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
+
+#ifdef CONFIG_ACPI_PROCFS
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#endif
+
#include <linux/jiffies.h>
#include <linux/kmod.h>
-#include <linux/seq_file.h>
#include <linux/reboot.h>
#include <linux/device.h>
#include <asm/uaccess.h>
static int acpi_thermal_remove(struct acpi_device *device, int type);
static int acpi_thermal_resume(struct acpi_device *device);
static void acpi_thermal_notify(struct acpi_device *device, u32 event);
-static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
-static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
-static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
-static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file);
-static ssize_t acpi_thermal_write_cooling_mode(struct file *,
- const char __user *, size_t,
- loff_t *);
-static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file);
-static ssize_t acpi_thermal_write_polling(struct file *, const char __user *,
- size_t, loff_t *);
static const struct acpi_device_id thermal_device_ids[] = {
{ACPI_THERMAL_HID, 0},
struct mutex lock;
};
+#ifdef CONFIG_ACPI_PROCFS
+static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
+static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
+static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
+static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file);
+static ssize_t acpi_thermal_write_cooling_mode(struct file *,
+ const char __user *, size_t,
+ loff_t *);
+static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file);
+static ssize_t acpi_thermal_write_polling(struct file *, const char __user *,
+ size_t, loff_t *);
+
static const struct file_operations acpi_thermal_state_fops = {
.owner = THIS_MODULE,
.open = acpi_thermal_state_open_fs,
.llseek = seq_lseek,
.release = single_release,
};
+#endif /* CONFIG_ACPI_PROCFS*/
/* --------------------------------------------------------------------------
Thermal Zone Management
return 0;
}
-static int acpi_thermal_set_polling(struct acpi_thermal *tz, int seconds)
-{
-
- if (!tz)
- return -EINVAL;
-
- tz->polling_frequency = seconds * 10; /* Convert value to deci-seconds */
-
- tz->thermal_zone->polling_delay = seconds * 1000;
-
- if (tz->tz_enabled)
- thermal_zone_device_update(tz->thermal_zone);
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Polling frequency set to %lu seconds\n",
- tz->polling_frequency/10));
-
- return 0;
-}
-
static int acpi_thermal_set_cooling_mode(struct acpi_thermal *tz, int mode)
{
acpi_status status = AE_OK;
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
-
+#ifdef CONFIG_ACPI_PROCFS
static struct proc_dir_entry *acpi_thermal_dir;
static int acpi_thermal_state_seq_show(struct seq_file *seq, void *offset)
PDE(inode)->data);
}
+static int acpi_thermal_set_polling(struct acpi_thermal *tz, int seconds)
+{
+ if (!tz)
+ return -EINVAL;
+
+ /* Convert value to deci-seconds */
+ tz->polling_frequency = seconds * 10;
+
+ tz->thermal_zone->polling_delay = seconds * 1000;
+
+ if (tz->tz_enabled)
+ thermal_zone_device_update(tz->thermal_zone);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Polling frequency set to %lu seconds\n",
+ tz->polling_frequency/10));
+
+ return 0;
+}
+
static ssize_t
acpi_thermal_write_polling(struct file *file,
const char __user * buffer,
return 0;
}
-
+#else
+static inline int acpi_thermal_add_fs(struct acpi_device *device) { return 0; }
+static inline int acpi_thermal_remove_fs(struct acpi_device *device)
+{
+ return 0;
+}
+#endif /* CONFIG_ACPI_PROCFS */
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
printk(KERN_NOTICE "ACPI: thermal control disabled\n");
return -ENODEV;
}
+
+#ifdef CONFIG_ACPI_PROCFS
acpi_thermal_dir = proc_mkdir(ACPI_THERMAL_CLASS, acpi_root_dir);
if (!acpi_thermal_dir)
return -ENODEV;
+#endif
result = acpi_bus_register_driver(&acpi_thermal_driver);
if (result < 0) {
+#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
+#endif
return -ENODEV;
}
acpi_bus_unregister_driver(&acpi_thermal_driver);
+#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
+#endif
return;
}
struct acpi_video_bus_flags flags;
struct list_head video_device_list;
struct mutex device_list_lock; /* protects video_device_list */
+#ifdef CONFIG_ACPI_PROCFS
struct proc_dir_entry *dir;
+#endif
struct input_dev *input;
char phys[32]; /* for input device */
struct notifier_block pm_nb;
struct output_device *output_dev;
};
+#ifdef CONFIG_ACPI_PROCFS
/* bus */
static int acpi_video_bus_info_open_fs(struct inode *inode, struct file *file);
static const struct file_operations acpi_video_bus_info_fops = {
.llseek = seq_lseek,
.release = single_release,
};
+#endif /* CONFIG_ACPI_PROCFS */
static const char device_decode[][30] = {
"motherboard VGA device",
/* device */
-static int
-acpi_video_device_query(struct acpi_video_device *device, unsigned long long *state)
-{
- int status;
-
- status = acpi_evaluate_integer(device->dev->handle, "_DGS", NULL, state);
-
- return status;
-}
-
static int
acpi_video_device_get_state(struct acpi_video_device *device,
unsigned long long *state)
/* bus */
-static int
-acpi_video_bus_set_POST(struct acpi_video_bus *video, unsigned long option)
-{
- int status;
- unsigned long long tmp;
- union acpi_object arg0 = { ACPI_TYPE_INTEGER };
- struct acpi_object_list args = { 1, &arg0 };
-
-
- arg0.integer.value = option;
-
- status = acpi_evaluate_integer(video->device->handle, "_SPD", &args, &tmp);
- if (ACPI_SUCCESS(status))
- status = tmp ? (-EINVAL) : (AE_OK);
-
- return status;
-}
-
-static int
-acpi_video_bus_get_POST(struct acpi_video_bus *video, unsigned long long *id)
-{
- int status;
-
- status = acpi_evaluate_integer(video->device->handle, "_GPD", NULL, id);
-
- return status;
-}
-
-static int
-acpi_video_bus_POST_options(struct acpi_video_bus *video,
- unsigned long long *options)
-{
- int status;
-
- status = acpi_evaluate_integer(video->device->handle, "_VPO", NULL, options);
- *options &= 3;
-
- return status;
-}
-
/*
* Arg:
* video : video bus device pointer
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
+#ifdef CONFIG_ACPI_PROCFS
static struct proc_dir_entry *acpi_video_dir;
PDE(inode)->data);
}
+static int
+acpi_video_device_query(struct acpi_video_device *device,
+ unsigned long long *state)
+{
+ int status;
+
+ status = acpi_evaluate_integer(device->dev->handle, "_DGS",
+ NULL, state);
+
+ return status;
+}
+
static int acpi_video_device_state_seq_show(struct seq_file *seq, void *offset)
{
int status;
return single_open(file, acpi_video_bus_ROM_seq_show, PDE(inode)->data);
}
+static int
+acpi_video_bus_POST_options(struct acpi_video_bus *video,
+ unsigned long long *options)
+{
+ int status;
+
+ status = acpi_evaluate_integer(video->device->handle, "_VPO",
+ NULL, options);
+ *options &= 3;
+
+ return status;
+}
+
static int acpi_video_bus_POST_info_seq_show(struct seq_file *seq, void *offset)
{
struct acpi_video_bus *video = seq->private;
PDE(inode)->data);
}
+static int
+acpi_video_bus_get_POST(struct acpi_video_bus *video, unsigned long long *id)
+{
+ int status;
+
+ status = acpi_evaluate_integer(video->device->handle, "_GPD", NULL, id);
+
+ return status;
+}
+
static int acpi_video_bus_POST_seq_show(struct seq_file *seq, void *offset)
{
struct acpi_video_bus *video = seq->private;
return single_open(file, acpi_video_bus_DOS_seq_show, PDE(inode)->data);
}
+static int
+acpi_video_bus_set_POST(struct acpi_video_bus *video, unsigned long option)
+{
+ int status;
+ unsigned long long tmp;
+ union acpi_object arg0 = { ACPI_TYPE_INTEGER };
+ struct acpi_object_list args = { 1, &arg0 };
+
+
+ arg0.integer.value = option;
+
+ status = acpi_evaluate_integer(video->device->handle, "_SPD",
+ &args, &tmp);
+ if (ACPI_SUCCESS(status))
+ status = tmp ? (-EINVAL) : (AE_OK);
+
+ return status;
+}
+
static ssize_t
acpi_video_bus_write_POST(struct file *file,
const char __user * buffer,
return 0;
}
+#else
+static inline int acpi_video_device_add_fs(struct acpi_device *device)
+{
+ return 0;
+}
+static inline int acpi_video_device_remove_fs(struct acpi_device *device)
+{
+ return 0;
+}
+static inline int acpi_video_bus_add_fs(struct acpi_device *device)
+{
+ return 0;
+}
+static inline int acpi_video_bus_remove_fs(struct acpi_device *device)
+{
+ return 0;
+}
+#endif /* CONFIG_ACPI_PROCFS */
/* --------------------------------------------------------------------------
Driver Interface
status = acpi_video_bus_get_one_device(dev, video);
if (ACPI_FAILURE(status)) {
printk(KERN_WARNING PREFIX
- "Cant attach device");
+ "Cant attach device\n");
continue;
}
}
static int acpi_video_bus_put_one_device(struct acpi_video_device *device)
{
acpi_status status;
- struct acpi_video_bus *video;
-
if (!device || !device->video)
return -ENOENT;
- video = device->video;
-
acpi_video_device_remove_fs(device->dev);
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_WARNING PREFIX
+ "Cant remove video notify handler\n");
+ }
if (device->backlight) {
sysfs_remove_link(&device->backlight->dev.kobj, "device");
backlight_device_unregister(device->backlight);
return 0;
}
+#ifdef CONFIG_ACPI_PROCFS
acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir);
if (!acpi_video_dir)
return -ENODEV;
+#endif
result = acpi_bus_register_driver(&acpi_video_bus);
if (result < 0) {
}
acpi_bus_unregister_driver(&acpi_video_bus);
+#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+#endif
register_count = 0;
ACPI_MODULE_NAME("wakeup_devices")
/**
- * acpi_enable_wakeup_device_prep - Prepare wake-up devices.
+ * acpi_enable_wakeup_devices - Enable wake-up device GPEs.
* @sleep_state: ACPI system sleep state.
*
- * Enable all wake-up devices' power, unless the requested system sleep state is
- * too deep.
+ * Enable wakeup device power of devices with the state.enable flag set and set
+ * the wakeup enable mask bits in the GPE registers that correspond to wakeup
+ * devices.
*/
-void acpi_enable_wakeup_device_prep(u8 sleep_state)
+void acpi_enable_wakeup_devices(u8 sleep_state)
{
struct list_head *node, *next;
- list_for_each_safe(node, next, &acpi_wakeup_device_list) {
- struct acpi_device *dev = container_of(node,
- struct acpi_device,
- wakeup_list);
-
- if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled
- || (sleep_state > (u32) dev->wakeup.sleep_state))
- continue;
-
- acpi_enable_wakeup_device_power(dev, sleep_state);
- }
-}
-
-/**
- * acpi_enable_wakeup_device - Enable wake-up device GPEs.
- * @sleep_state: ACPI system sleep state.
- *
- * Enable all wake-up devices' GPEs, with the assumption that
- * acpi_disable_all_gpes() was executed before, so we don't need to disable any
- * GPEs here.
- */
-void acpi_enable_wakeup_device(u8 sleep_state)
-{
- struct list_head *node, *next;
-
- /*
- * Caution: this routine must be invoked when interrupt is disabled
- * Refer ACPI2.0: P212
- */
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
|| sleep_state > (u32) dev->wakeup.sleep_state)
continue;
+ if (dev->wakeup.state.enabled)
+ acpi_enable_wakeup_device_power(dev, sleep_state);
+
/* The wake-up power should have been enabled already. */
acpi_gpe_wakeup(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
ACPI_GPE_ENABLE);
}
/**
- * acpi_disable_wakeup_device - Disable devices' wakeup capability.
+ * acpi_disable_wakeup_devices - Disable devices' wakeup capability.
* @sleep_state: ACPI system sleep state.
- *
- * This function only affects devices with wakeup.state.enabled set, which means
- * that it reverses the changes made by acpi_enable_wakeup_device_prep().
*/
-void acpi_disable_wakeup_device(u8 sleep_state)
+void acpi_disable_wakeup_devices(u8 sleep_state)
{
struct list_head *node, *next;
If unsure, say N.
+config PATA_PXA
+ tristate "PXA DMA-capable PATA support"
+ depends on ARCH_PXA
+ help
+ This option enables support for harddrive attached to PXA CPU's bus.
+
+ NOTE: This driver utilizes PXA DMA controller, in case your hardware
+ is not capable of doing MWDMA, use pata_platform instead.
+
+ If unsure, say N.
+
config PATA_WINBOND
tristate "Winbond SL82C105 PATA support"
depends on PCI
obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
+obj-$(CONFIG_PATA_PXA) += pata_pxa.o
+
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
# Should be last but one libata driver
struct ata_eh_info *ehi = &ap->link.eh_info;
int wait = 0;
unsigned long flags;
- acpi_handle handle;
-
- if (dev)
- handle = dev->acpi_handle;
- else
- handle = ap->acpi_handle;
spin_lock_irqsave(ap->lock, flags);
/*
* The special characters ?, [, -, or *, can be matched using a set, eg. [*]
* Behaviour with malformed patterns is undefined, though generally reasonable.
*
- * Example patterns: "SD1?", "SD1[0-5]", "*R0", SD*1?[012]*xx"
+ * Sample patterns: "SD1?", "SD1[0-5]", "*R0", "SD*1?[012]*xx"
*
* This function uses one level of recursion per '*' in pattern.
* Since it calls _nothing_ else, and has _no_ explicit local variables,
*/
static int atapi_drain_needed(struct request *rq)
{
- if (likely(!blk_pc_request(rq)))
+ if (likely(rq->cmd_type != REQ_TYPE_BLOCK_PC))
return 0;
- if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_RW))
+ if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_WRITE))
return 0;
return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC;
/* ======================================================================== */
static int __devinit
-mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match)
+mpc52xx_ata_probe(struct platform_device *op, const struct of_device_id *match)
{
unsigned int ipb_freq;
struct resource res_mem;
}
static int
-mpc52xx_ata_remove(struct of_device *op)
+mpc52xx_ata_remove(struct platform_device *op)
{
struct mpc52xx_ata_priv *priv;
int task_irq;
#ifdef CONFIG_PM
static int
-mpc52xx_ata_suspend(struct of_device *op, pm_message_t state)
+mpc52xx_ata_suspend(struct platform_device *op, pm_message_t state)
{
struct ata_host *host = dev_get_drvdata(&op->dev);
}
static int
-mpc52xx_ata_resume(struct of_device *op)
+mpc52xx_ata_resume(struct platform_device *op)
{
struct ata_host *host = dev_get_drvdata(&op->dev);
struct mpc52xx_ata_priv *priv = host->private_data;
#include <linux/of_platform.h>
#include <linux/ata_platform.h>
-static int __devinit pata_of_platform_probe(struct of_device *ofdev,
+static int __devinit pata_of_platform_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
int ret;
reg_shift, pio_mask);
}
-static int __devexit pata_of_platform_remove(struct of_device *ofdev)
+static int __devexit pata_of_platform_remove(struct platform_device *ofdev)
{
return __pata_platform_remove(&ofdev->dev);
}
--- /dev/null
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+
+#include <scsi/scsi_host.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/pata_pxa.h>
+#include <mach/dma.h>
+
+#define DRV_NAME "pata_pxa"
+#define DRV_VERSION "0.1"
+
+struct pata_pxa_data {
+ uint32_t dma_channel;
+ struct pxa_dma_desc *dma_desc;
+ dma_addr_t dma_desc_addr;
+ uint32_t dma_desc_id;
+
+ /* DMA IO physical address */
+ uint32_t dma_io_addr;
+ /* PXA DREQ<0:2> pin selector */
+ uint32_t dma_dreq;
+ /* DMA DCSR register value */
+ uint32_t dma_dcsr;
+
+ struct completion dma_done;
+};
+
+/*
+ * Setup the DMA descriptors. The size is transfer capped at 4k per descriptor,
+ * if the transfer is longer, it is split into multiple chained descriptors.
+ */
+static void pxa_load_dmac(struct scatterlist *sg, struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+
+ uint32_t cpu_len, seg_len;
+ dma_addr_t cpu_addr;
+
+ cpu_addr = sg_dma_address(sg);
+ cpu_len = sg_dma_len(sg);
+
+ do {
+ seg_len = (cpu_len > 0x1000) ? 0x1000 : cpu_len;
+
+ pd->dma_desc[pd->dma_desc_id].ddadr = pd->dma_desc_addr +
+ ((pd->dma_desc_id + 1) * sizeof(struct pxa_dma_desc));
+
+ pd->dma_desc[pd->dma_desc_id].dcmd = DCMD_BURST32 |
+ DCMD_WIDTH2 | (DCMD_LENGTH & seg_len);
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE) {
+ pd->dma_desc[pd->dma_desc_id].dsadr = cpu_addr;
+ pd->dma_desc[pd->dma_desc_id].dtadr = pd->dma_io_addr;
+ pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCSRCADDR |
+ DCMD_FLOWTRG;
+ } else {
+ pd->dma_desc[pd->dma_desc_id].dsadr = pd->dma_io_addr;
+ pd->dma_desc[pd->dma_desc_id].dtadr = cpu_addr;
+ pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCTRGADDR |
+ DCMD_FLOWSRC;
+ }
+
+ cpu_len -= seg_len;
+ cpu_addr += seg_len;
+ pd->dma_desc_id++;
+
+ } while (cpu_len);
+
+ /* Should not happen */
+ if (seg_len & 0x1f)
+ DALGN |= (1 << pd->dma_dreq);
+}
+
+/*
+ * Prepare taskfile for submission.
+ */
+static void pxa_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+ int si = 0;
+ struct scatterlist *sg;
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ pd->dma_desc_id = 0;
+
+ DCSR(pd->dma_channel) = 0;
+ DALGN &= ~(1 << pd->dma_dreq);
+
+ for_each_sg(qc->sg, sg, qc->n_elem, si)
+ pxa_load_dmac(sg, qc);
+
+ pd->dma_desc[pd->dma_desc_id - 1].ddadr = DDADR_STOP;
+
+ /* Fire IRQ only at the end of last block */
+ pd->dma_desc[pd->dma_desc_id - 1].dcmd |= DCMD_ENDIRQEN;
+
+ DDADR(pd->dma_channel) = pd->dma_desc_addr;
+ DRCMR(pd->dma_dreq) = DRCMR_MAPVLD | pd->dma_channel;
+
+}
+
+/*
+ * Configure the DMA controller, load the DMA descriptors, but don't start the
+ * DMA controller yet. Only issue the ATA command.
+ */
+static void pxa_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
+}
+
+/*
+ * Execute the DMA transfer.
+ */
+static void pxa_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+ init_completion(&pd->dma_done);
+ DCSR(pd->dma_channel) = DCSR_RUN;
+}
+
+/*
+ * Wait until the DMA transfer completes, then stop the DMA controller.
+ */
+static void pxa_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+
+ if ((DCSR(pd->dma_channel) & DCSR_RUN) &&
+ wait_for_completion_timeout(&pd->dma_done, HZ))
+ dev_err(qc->ap->dev, "Timeout waiting for DMA completion!");
+
+ DCSR(pd->dma_channel) = 0;
+}
+
+/*
+ * Read DMA status. The bmdma_stop() will take care of properly finishing the
+ * DMA transfer so we always have DMA-complete interrupt here.
+ */
+static unsigned char pxa_bmdma_status(struct ata_port *ap)
+{
+ struct pata_pxa_data *pd = ap->private_data;
+ unsigned char ret = ATA_DMA_INTR;
+
+ if (pd->dma_dcsr & DCSR_BUSERR)
+ ret |= ATA_DMA_ERR;
+
+ return ret;
+}
+
+/*
+ * No IRQ register present so we do nothing.
+ */
+static void pxa_irq_clear(struct ata_port *ap)
+{
+}
+
+/*
+ * Check for ATAPI DMA. ATAPI DMA is unsupported by this driver. It's still
+ * unclear why ATAPI has DMA issues.
+ */
+static int pxa_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ return -EOPNOTSUPP;
+}
+
+static struct scsi_host_template pxa_ata_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pxa_ata_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_40wire,
+
+ .bmdma_setup = pxa_bmdma_setup,
+ .bmdma_start = pxa_bmdma_start,
+ .bmdma_stop = pxa_bmdma_stop,
+ .bmdma_status = pxa_bmdma_status,
+
+ .check_atapi_dma = pxa_check_atapi_dma,
+
+ .sff_irq_clear = pxa_irq_clear,
+
+ .qc_prep = pxa_qc_prep,
+};
+
+/*
+ * DMA interrupt handler.
+ */
+static void pxa_ata_dma_irq(int dma, void *port)
+{
+ struct ata_port *ap = port;
+ struct pata_pxa_data *pd = ap->private_data;
+
+ pd->dma_dcsr = DCSR(dma);
+ DCSR(dma) = pd->dma_dcsr;
+
+ if (pd->dma_dcsr & DCSR_STOPSTATE)
+ complete(&pd->dma_done);
+}
+
+static int __devinit pxa_ata_probe(struct platform_device *pdev)
+{
+ struct ata_host *host;
+ struct ata_port *ap;
+ struct pata_pxa_data *data;
+ struct resource *cmd_res;
+ struct resource *ctl_res;
+ struct resource *dma_res;
+ struct resource *irq_res;
+ struct pata_pxa_pdata *pdata = pdev->dev.platform_data;
+ int ret = 0;
+
+ /*
+ * Resource validation, three resources are needed:
+ * - CMD port base address
+ * - CTL port base address
+ * - DMA port base address
+ * - IRQ pin
+ */
+ if (pdev->num_resources != 4) {
+ dev_err(&pdev->dev, "invalid number of resources\n");
+ return -EINVAL;
+ }
+
+ /*
+ * CMD port base address
+ */
+ cmd_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(cmd_res == NULL))
+ return -EINVAL;
+
+ /*
+ * CTL port base address
+ */
+ ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (unlikely(ctl_res == NULL))
+ return -EINVAL;
+
+ /*
+ * DMA port base address
+ */
+ dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (unlikely(dma_res == NULL))
+ return -EINVAL;
+
+ /*
+ * IRQ pin
+ */
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (unlikely(irq_res == NULL))
+ return -EINVAL;
+
+ /*
+ * Allocate the host
+ */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ ap = host->ports[0];
+ ap->ops = &pxa_ata_port_ops;
+ ap->pio_mask = ATA_PIO4;
+ ap->mwdma_mask = ATA_MWDMA2;
+ ap->flags = ATA_FLAG_MMIO;
+
+ ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, cmd_res->start,
+ resource_size(cmd_res));
+ ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
+ resource_size(ctl_res));
+ ap->ioaddr.bmdma_addr = devm_ioremap(&pdev->dev, dma_res->start,
+ resource_size(dma_res));
+
+ /*
+ * Adjust register offsets
+ */
+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+ ap->ioaddr.data_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_DATA << pdata->reg_shift);
+ ap->ioaddr.error_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_ERR << pdata->reg_shift);
+ ap->ioaddr.feature_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_FEATURE << pdata->reg_shift);
+ ap->ioaddr.nsect_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_NSECT << pdata->reg_shift);
+ ap->ioaddr.lbal_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_LBAL << pdata->reg_shift);
+ ap->ioaddr.lbam_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_LBAM << pdata->reg_shift);
+ ap->ioaddr.lbah_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_LBAH << pdata->reg_shift);
+ ap->ioaddr.device_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_DEVICE << pdata->reg_shift);
+ ap->ioaddr.status_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_STATUS << pdata->reg_shift);
+ ap->ioaddr.command_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_CMD << pdata->reg_shift);
+
+ /*
+ * Allocate and load driver's internal data structure
+ */
+ data = devm_kzalloc(&pdev->dev, sizeof(struct pata_pxa_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ap->private_data = data;
+ data->dma_dreq = pdata->dma_dreq;
+ data->dma_io_addr = dma_res->start;
+
+ /*
+ * Allocate space for the DMA descriptors
+ */
+ data->dma_desc = dmam_alloc_coherent(&pdev->dev, PAGE_SIZE,
+ &data->dma_desc_addr, GFP_KERNEL);
+ if (!data->dma_desc)
+ return -EINVAL;
+
+ /*
+ * Request the DMA channel
+ */
+ data->dma_channel = pxa_request_dma(DRV_NAME, DMA_PRIO_LOW,
+ pxa_ata_dma_irq, ap);
+ if (data->dma_channel < 0)
+ return -EBUSY;
+
+ /*
+ * Stop and clear the DMA channel
+ */
+ DCSR(data->dma_channel) = 0;
+
+ /*
+ * Activate the ATA host
+ */
+ ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
+ pdata->irq_flags, &pxa_ata_sht);
+ if (ret)
+ pxa_free_dma(data->dma_channel);
+
+ return ret;
+}
+
+static int __devexit pxa_ata_remove(struct platform_device *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct pata_pxa_data *data = host->ports[0]->private_data;
+
+ pxa_free_dma(data->dma_channel);
+
+ ata_host_detach(host);
+
+ return 0;
+}
+
+static struct platform_driver pxa_ata_driver = {
+ .probe = pxa_ata_probe,
+ .remove = __devexit_p(pxa_ata_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init pxa_ata_init(void)
+{
+ return platform_driver_register(&pxa_ata_driver);
+}
+
+static void __exit pxa_ata_exit(void)
+{
+ platform_driver_unregister(&pxa_ata_driver);
+}
+
+module_init(pxa_ata_init);
+module_exit(pxa_ata_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
},
};
-static int sata_dwc_probe(struct of_device *ofdev,
+static int sata_dwc_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct sata_dwc_device *hsdev;
return err;
}
-static int sata_dwc_remove(struct of_device *ofdev)
+static int sata_dwc_remove(struct platform_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct ata_host *host = dev_get_drvdata(dev);
},
};
-static int sata_fsl_probe(struct of_device *ofdev,
+static int sata_fsl_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
int retval = -ENXIO;
return retval;
}
-static int sata_fsl_remove(struct of_device *ofdev)
+static int sata_fsl_remove(struct platform_device *ofdev)
{
struct ata_host *host = dev_get_drvdata(&ofdev->dev);
struct sata_fsl_host_priv *host_priv = host->private_data;
}
#ifdef CONFIG_PM
-static int sata_fsl_suspend(struct of_device *op, pm_message_t state)
+static int sata_fsl_suspend(struct platform_device *op, pm_message_t state)
{
struct ata_host *host = dev_get_drvdata(&op->dev);
return ata_host_suspend(host, state);
}
-static int sata_fsl_resume(struct of_device *op)
+static int sata_fsl_resume(struct platform_device *op)
{
struct ata_host *host = dev_get_drvdata(&op->dev);
struct sata_fsl_host_priv *host_priv = host->private_data;
static u32 fore200e_sba_dma_map(struct fore200e *fore200e, void* virt_addr, int size, int direction)
{
- struct of_device *op = fore200e->bus_dev;
+ struct platform_device *op = fore200e->bus_dev;
u32 dma_addr;
dma_addr = dma_map_single(&op->dev, virt_addr, size, direction);
static void fore200e_sba_dma_unmap(struct fore200e *fore200e, u32 dma_addr, int size, int direction)
{
- struct of_device *op = fore200e->bus_dev;
+ struct platform_device *op = fore200e->bus_dev;
DPRINTK(3, "SBUS DVMA unmapping: dma_addr = 0x%08x, size = %d, direction = %d,\n",
dma_addr, size, direction);
static void fore200e_sba_dma_sync_for_cpu(struct fore200e *fore200e, u32 dma_addr, int size, int direction)
{
- struct of_device *op = fore200e->bus_dev;
+ struct platform_device *op = fore200e->bus_dev;
DPRINTK(3, "SBUS DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction);
static void fore200e_sba_dma_sync_for_device(struct fore200e *fore200e, u32 dma_addr, int size, int direction)
{
- struct of_device *op = fore200e->bus_dev;
+ struct platform_device *op = fore200e->bus_dev;
DPRINTK(3, "SBUS DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction);
static int fore200e_sba_dma_chunk_alloc(struct fore200e *fore200e, struct chunk *chunk,
int size, int nbr, int alignment)
{
- struct of_device *op = fore200e->bus_dev;
+ struct platform_device *op = fore200e->bus_dev;
chunk->alloc_size = chunk->align_size = size * nbr;
/* free a DVMA consistent chunk of memory */
static void fore200e_sba_dma_chunk_free(struct fore200e *fore200e, struct chunk *chunk)
{
- struct of_device *op = fore200e->bus_dev;
+ struct platform_device *op = fore200e->bus_dev;
dma_free_coherent(&op->dev, chunk->alloc_size,
chunk->alloc_addr, chunk->dma_addr);
static int __init fore200e_sba_map(struct fore200e *fore200e)
{
- struct of_device *op = fore200e->bus_dev;
+ struct platform_device *op = fore200e->bus_dev;
unsigned int bursts;
/* gain access to the SBA specific registers */
static void fore200e_sba_unmap(struct fore200e *fore200e)
{
- struct of_device *op = fore200e->bus_dev;
+ struct platform_device *op = fore200e->bus_dev;
of_iounmap(&op->resource[0], fore200e->regs.sba.hcr, SBA200E_HCR_LENGTH);
of_iounmap(&op->resource[1], fore200e->regs.sba.bsr, SBA200E_BSR_LENGTH);
static int __init fore200e_sba_prom_read(struct fore200e *fore200e, struct prom_data *prom)
{
- struct of_device *op = fore200e->bus_dev;
+ struct platform_device *op = fore200e->bus_dev;
const u8 *prop;
int len;
static int fore200e_sba_proc_read(struct fore200e *fore200e, char *page)
{
- struct of_device *op = fore200e->bus_dev;
+ struct platform_device *op = fore200e->bus_dev;
const struct linux_prom_registers *regs;
regs = of_get_property(op->dev.of_node, "reg", NULL);
device = &((struct pci_dev *) fore200e->bus_dev)->dev;
#ifdef CONFIG_SBUS
else if (strcmp(fore200e->bus->model_name, "SBA-200E") == 0)
- device = &((struct of_device *) fore200e->bus_dev)->dev;
+ device = &((struct platform_device *) fore200e->bus_dev)->dev;
#endif
else
return err;
}
#ifdef CONFIG_SBUS
-static int __devinit fore200e_sba_probe(struct of_device *op,
+static int __devinit fore200e_sba_probe(struct platform_device *op,
const struct of_device_id *match)
{
const struct fore200e_bus *bus = match->data;
return 0;
}
-static int __devexit fore200e_sba_remove(struct of_device *op)
+static int __devexit fore200e_sba_remove(struct platform_device *op)
{
struct fore200e *fore200e = dev_get_drvdata(&op->dev);
struct gendisk *disk = bdev->bd_disk;
DAC960_Controller_T *p = disk->queue->queuedata;
int drive_nr = (long)disk->private_data;
+ int ret = -ENXIO;
+ lock_kernel();
if (p->FirmwareType == DAC960_V1_Controller) {
if (p->V1.LogicalDriveInformation[drive_nr].
LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
- return -ENXIO;
+ goto out;
} else {
DAC960_V2_LogicalDeviceInfo_T *i =
p->V2.LogicalDeviceInformation[drive_nr];
if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
- return -ENXIO;
+ goto out;
}
check_disk_change(bdev);
if (!get_capacity(p->disks[drive_nr]))
- return -ENXIO;
- return 0;
+ goto out;
+ ret = 0;
+out:
+ unlock_kernel();
+ return ret;
}
static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
#include <linux/hdreg.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/smp_lock.h>
#include <linux/amifdreg.h>
#include <linux/amifd.h>
#include <linux/buffer_head.h>
return 0;
}
-static int fd_ioctl(struct block_device *bdev, fmode_t mode,
+static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long param)
{
struct amiga_floppy_struct *p = bdev->bd_disk->private_data;
return 0;
}
+static int fd_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = fd_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
static void fd_probe(int dev)
{
unsigned long code;
int old_dev;
unsigned long flags;
+ lock_kernel();
old_dev = fd_device[drive];
- if (fd_ref[drive] && old_dev != system)
+ if (fd_ref[drive] && old_dev != system) {
+ unlock_kernel();
return -EBUSY;
+ }
if (mode & (FMODE_READ|FMODE_WRITE)) {
check_disk_change(bdev);
fd_deselect (drive);
rel_fdc();
- if (wrprot)
+ if (wrprot) {
+ unlock_kernel();
return -EROFS;
+ }
}
}
printk(KERN_INFO "fd%d: accessing %s-disk with %s-layout\n",drive,
unit[drive].type->name, data_types[system].name);
+ unlock_kernel();
return 0;
}
struct amiga_floppy_struct *p = disk->private_data;
int drive = p - unit;
+ lock_kernel();
if (unit[drive].dirty == 1) {
del_timer (flush_track_timer + drive);
non_int_flush_track (drive);
/* the mod_use counter is handled this way */
floppy_off (drive | 0x40000000);
#endif
+ unlock_kernel();
return 0;
}
.owner = THIS_MODULE,
.open = floppy_open,
.release = floppy_release,
- .locked_ioctl = fd_ioctl,
+ .ioctl = fd_ioctl,
.getgeo = fd_getgeo,
.media_changed = amiga_floppy_change,
};
#include <linux/slab.h>
#include <linux/genhd.h>
#include <linux/netdevice.h>
+#include <linux/smp_lock.h>
#include "aoe.h"
static struct kmem_cache *buf_pool_cache;
struct aoedev *d = bdev->bd_disk->private_data;
ulong flags;
+ lock_kernel();
spin_lock_irqsave(&d->lock, flags);
if (d->flags & DEVFL_UP) {
d->nopen++;
spin_unlock_irqrestore(&d->lock, flags);
+ unlock_kernel();
return 0;
}
spin_unlock_irqrestore(&d->lock, flags);
+ unlock_kernel();
return -ENODEV;
}
BUG();
bio_endio(bio, -ENXIO);
return 0;
- } else if (bio_rw_flagged(bio, BIO_RW_BARRIER)) {
+ } else if (bio->bi_rw & REQ_HARDBARRIER) {
bio_endio(bio, -EOPNOTSUPP);
return 0;
} else if (bio->bi_io_vec == NULL) {
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <asm/atafd.h>
#include <asm/atafdreg.h>
static void finish_fdc_done( int dummy );
static void setup_req_params( int drive );
static void redo_fd_request( void);
-static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
+static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
cmd, unsigned long param);
static void fd_probe( int drive );
static int fd_test_drive_present( int drive );
atari_enable_irq( IRQ_MFP_FDC );
}
-static int fd_ioctl(struct block_device *bdev, fmode_t mode,
+static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long param)
{
struct gendisk *disk = bdev->bd_disk;
}
}
+static int fd_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret;
+
+ lock_kernel();
+ ret = fd_locked_ioctl(bdev, mode, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
/* Initialize the 'unit' variable for drive 'drive' */
return 0;
}
+static int floppy_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = floppy_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
static int floppy_release(struct gendisk *disk, fmode_t mode)
{
struct atari_floppy_struct *p = disk->private_data;
+ lock_kernel();
if (p->ref < 0)
p->ref = 0;
else if (!p->ref--) {
printk(KERN_ERR "floppy_release with fd_ref == 0");
p->ref = 0;
}
+ unlock_kernel();
return 0;
}
static const struct block_device_operations floppy_fops = {
.owner = THIS_MODULE,
- .open = floppy_open,
+ .open = floppy_unlocked_open,
.release = floppy_release,
- .locked_ioctl = fd_ioctl,
+ .ioctl = fd_ioctl,
.media_changed = check_floppy_change,
.revalidate_disk= floppy_revalidate,
};
#include <linux/blkdev.h>
#include <linux/bio.h>
#include <linux/highmem.h>
+#include <linux/smp_lock.h>
#include <linux/radix-tree.h>
#include <linux/buffer_head.h> /* invalidate_bh_lrus() */
#include <linux/slab.h>
get_capacity(bdev->bd_disk))
goto out;
- if (unlikely(bio_rw_flagged(bio, BIO_RW_DISCARD))) {
+ if (unlikely(bio->bi_rw & REQ_DISCARD)) {
err = 0;
discard_from_brd(brd, sector, bio->bi_size);
goto out;
* ram device BLKFLSBUF has special semantics, we want to actually
* release and destroy the ramdisk data.
*/
+ lock_kernel();
mutex_lock(&bdev->bd_mutex);
error = -EBUSY;
if (bdev->bd_openers <= 1) {
error = 0;
}
mutex_unlock(&bdev->bd_mutex);
+ unlock_kernel();
return error;
}
static const struct block_device_operations brd_fops = {
.owner = THIS_MODULE,
- .locked_ioctl = brd_ioctl,
+ .ioctl = brd_ioctl,
#ifdef CONFIG_BLK_DEV_XIP
.direct_access = brd_direct_access,
#endif
if (!brd->brd_queue)
goto out_free_dev;
blk_queue_make_request(brd->brd_queue, brd_make_request);
- blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL);
+ blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG);
blk_queue_max_hw_sectors(brd->brd_queue, 1024);
blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
#include <linux/kthread.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 3.6.20)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.26)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 26)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
-MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
- " SA6i P600 P800 P400 P400i E200 E200i E500 P700m"
- " Smart Array G2 Series SAS/SATA Controllers");
-MODULE_VERSION("3.6.20");
+MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
+MODULE_VERSION("3.6.26");
MODULE_LICENSE("GPL");
static int cciss_allow_hpsa;
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3250},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3251},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3252},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3253},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3254},
{0,}
};
{0x3249103C, "Smart Array P812", &SA5_access},
{0x324A103C, "Smart Array P712m", &SA5_access},
{0x324B103C, "Smart Array P711m", &SA5_access},
+ {0x3250103C, "Smart Array", &SA5_access},
+ {0x3251103C, "Smart Array", &SA5_access},
+ {0x3252103C, "Smart Array", &SA5_access},
+ {0x3253103C, "Smart Array", &SA5_access},
+ {0x3254103C, "Smart Array", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
static LIST_HEAD(scan_q);
static void do_cciss_request(struct request_queue *q);
-static irqreturn_t do_cciss_intr(int irq, void *dev_id);
+static irqreturn_t do_cciss_intx(int irq, void *dev_id);
+static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id);
static int cciss_open(struct block_device *bdev, fmode_t mode);
+static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode);
static int cciss_release(struct gendisk *disk, fmode_t mode);
+static int do_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg);
static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg);
static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
static int deregister_disk(ctlr_info_t *h, int drv_index,
int clear_all, int via_ioctl);
-static void cciss_read_capacity(int ctlr, int logvol,
+static void cciss_read_capacity(ctlr_info_t *h, int logvol,
sector_t *total_size, unsigned int *block_size);
-static void cciss_read_capacity_16(int ctlr, int logvol,
+static void cciss_read_capacity_16(ctlr_info_t *h, int logvol,
sector_t *total_size, unsigned int *block_size);
-static void cciss_geometry_inquiry(int ctlr, int logvol,
+static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol,
sector_t total_size,
unsigned int block_size, InquiryData_struct *inq_buff,
drive_info_struct *drv);
-static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
- __u32);
+static void __devinit cciss_interrupt_mode(ctlr_info_t *);
static void start_io(ctlr_info_t *h);
-static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
+static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
__u8 page_code, unsigned char scsi3addr[],
int cmd_type);
static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
int attempt_retry);
static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c);
-static void fail_all_cmds(unsigned long ctlr);
static int add_to_scan_list(struct ctlr_info *h);
static int scan_thread(void *data);
static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c);
static void cciss_device_release(struct device *dev);
static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
static void cciss_free_drive_info(ctlr_info_t *h, int drv_index);
+static inline u32 next_command(ctlr_info_t *h);
+static int __devinit cciss_find_cfg_addrs(struct pci_dev *pdev,
+ void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index,
+ u64 *cfg_offset);
+static int __devinit cciss_pci_find_memory_BAR(struct pci_dev *pdev,
+ unsigned long *memory_bar);
+
+
+/* performant mode helper functions */
+static void calc_bucket_map(int *bucket, int num_buckets, int nsgs,
+ int *bucket_map);
+static void cciss_put_controller_into_performant_mode(ctlr_info_t *h);
#ifdef CONFIG_PROC_FS
-static void cciss_procinit(int i);
+static void cciss_procinit(ctlr_info_t *h);
#else
-static void cciss_procinit(int i)
+static void cciss_procinit(ctlr_info_t *h)
{
}
#endif /* CONFIG_PROC_FS */
static const struct block_device_operations cciss_fops = {
.owner = THIS_MODULE,
- .open = cciss_open,
+ .open = cciss_unlocked_open,
.release = cciss_release,
- .locked_ioctl = cciss_ioctl,
+ .ioctl = do_ioctl,
.getgeo = cciss_getgeo,
#ifdef CONFIG_COMPAT
.compat_ioctl = cciss_compat_ioctl,
.revalidate_disk = cciss_revalidate,
};
+/* set_performant_mode: Modify the tag for cciss performant
+ * set bit 0 for pull model, bits 3-1 for block fetch
+ * register number
+ */
+static void set_performant_mode(ctlr_info_t *h, CommandList_struct *c)
+{
+ if (likely(h->transMethod == CFGTBL_Trans_Performant))
+ c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
+}
+
/*
* Enqueuing and dequeuing functions for cmdlists.
*/
hlist_del_init(&c->list);
}
+static void enqueue_cmd_and_start_io(ctlr_info_t *h,
+ CommandList_struct *c)
+{
+ unsigned long flags;
+ set_performant_mode(h, c);
+ spin_lock_irqsave(&h->lock, flags);
+ addQ(&h->reqQ, c);
+ h->Qdepth++;
+ start_io(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+}
+
static void cciss_free_sg_chain_blocks(SGDescriptor_struct **cmd_sg_list,
int nr_cmds)
{
h->product_name,
(unsigned long)h->board_id,
h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
- h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
+ h->firm_ver[3], (unsigned int)h->intr[PERF_MODE_INT],
h->num_luns,
h->Qdepth, h->commands_outstanding,
h->maxQsinceinit, h->max_outstanding, h->maxSG);
#ifdef CONFIG_CISS_SCSI_TAPE
- cciss_seq_tape_report(seq, h->ctlr);
+ cciss_seq_tape_report(seq, h);
#endif /* CONFIG_CISS_SCSI_TAPE */
}
static void *cciss_seq_start(struct seq_file *seq, loff_t *pos)
{
ctlr_info_t *h = seq->private;
- unsigned ctlr = h->ctlr;
unsigned long flags;
/* prevent displaying bogus info during configuration
* or deconfiguration of a logical volume
*/
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring) {
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return ERR_PTR(-EBUSY);
}
h->busy_configuring = 1;
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (*pos == 0)
cciss_seq_show_header(seq);
struct seq_file *seq = file->private_data;
ctlr_info_t *h = seq->private;
- err = cciss_engage_scsi(h->ctlr);
+ err = cciss_engage_scsi(h);
if (err == 0)
err = length;
} else
.write = cciss_proc_write,
};
-static void __devinit cciss_procinit(int i)
+static void __devinit cciss_procinit(ctlr_info_t *h)
{
struct proc_dir_entry *pde;
proc_cciss = proc_mkdir("driver/cciss", NULL);
if (!proc_cciss)
return;
- pde = proc_create_data(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
+ pde = proc_create_data(h->devname, S_IWUSR | S_IRUSR | S_IRGRP |
S_IROTH, proc_cciss,
- &cciss_proc_fops, hba[i]);
+ &cciss_proc_fops, h);
}
#endif /* CONFIG_PROC_FS */
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring)
ret = -EBUSY;
else
memcpy(sn, drv->serial_no, sizeof(sn));
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (ret)
return ret;
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring)
ret = -EBUSY;
else
memcpy(vendor, drv->vendor, VENDOR_LEN + 1);
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (ret)
return ret;
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring)
ret = -EBUSY;
else
memcpy(model, drv->model, MODEL_LEN + 1);
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (ret)
return ret;
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring)
ret = -EBUSY;
else
memcpy(rev, drv->rev, REV_LEN + 1);
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (ret)
return ret;
unsigned long flags;
unsigned char lunid[8];
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return -EBUSY;
}
if (!drv->heads) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return -ENOTTY;
}
memcpy(lunid, drv->LunID, sizeof(lunid));
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
lunid[0], lunid[1], lunid[2], lunid[3],
lunid[4], lunid[5], lunid[6], lunid[7]);
int raid;
unsigned long flags;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return -EBUSY;
}
raid = drv->raid_level;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (raid < 0 || raid > RAID_UNKNOWN)
raid = RAID_UNKNOWN;
unsigned long flags;
int count;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return -EBUSY;
}
count = drv->usage_count;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return snprintf(buf, 20, "%d\n", count);
}
static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
/*
* For operations that cannot sleep, a command block is allocated at init,
* and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
- * which ones are free or in use. For operations that can wait for kmalloc
- * to possible sleep, this routine can be called with get_from_pool set to 0.
- * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was.
+ * which ones are free or in use.
*/
-static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool)
+static CommandList_struct *cmd_alloc(ctlr_info_t *h)
{
CommandList_struct *c;
int i;
u64bit temp64;
dma_addr_t cmd_dma_handle, err_dma_handle;
- if (!get_from_pool) {
- c = (CommandList_struct *) pci_alloc_consistent(h->pdev,
- sizeof(CommandList_struct), &cmd_dma_handle);
- if (c == NULL)
+ do {
+ i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
+ if (i == h->nr_cmds)
return NULL;
- memset(c, 0, sizeof(CommandList_struct));
+ } while (test_and_set_bit(i & (BITS_PER_LONG - 1),
+ h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
+ c = h->cmd_pool + i;
+ memset(c, 0, sizeof(CommandList_struct));
+ cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(CommandList_struct);
+ c->err_info = h->errinfo_pool + i;
+ memset(c->err_info, 0, sizeof(ErrorInfo_struct));
+ err_dma_handle = h->errinfo_pool_dhandle
+ + i * sizeof(ErrorInfo_struct);
+ h->nr_allocs++;
- c->cmdindex = -1;
+ c->cmdindex = i;
- c->err_info = (ErrorInfo_struct *)
- pci_alloc_consistent(h->pdev, sizeof(ErrorInfo_struct),
- &err_dma_handle);
+ INIT_HLIST_NODE(&c->list);
+ c->busaddr = (__u32) cmd_dma_handle;
+ temp64.val = (__u64) err_dma_handle;
+ c->ErrDesc.Addr.lower = temp64.val32.lower;
+ c->ErrDesc.Addr.upper = temp64.val32.upper;
+ c->ErrDesc.Len = sizeof(ErrorInfo_struct);
- if (c->err_info == NULL) {
- pci_free_consistent(h->pdev,
- sizeof(CommandList_struct), c, cmd_dma_handle);
- return NULL;
- }
- memset(c->err_info, 0, sizeof(ErrorInfo_struct));
- } else { /* get it out of the controllers pool */
-
- do {
- i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
- if (i == h->nr_cmds)
- return NULL;
- } while (test_and_set_bit
- (i & (BITS_PER_LONG - 1),
- h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: using command buffer %d\n", i);
-#endif
- c = h->cmd_pool + i;
- memset(c, 0, sizeof(CommandList_struct));
- cmd_dma_handle = h->cmd_pool_dhandle
- + i * sizeof(CommandList_struct);
- c->err_info = h->errinfo_pool + i;
- memset(c->err_info, 0, sizeof(ErrorInfo_struct));
- err_dma_handle = h->errinfo_pool_dhandle
- + i * sizeof(ErrorInfo_struct);
- h->nr_allocs++;
+ c->ctlr = h->ctlr;
+ return c;
+}
- c->cmdindex = i;
+/* allocate a command using pci_alloc_consistent, used for ioctls,
+ * etc., not for the main i/o path.
+ */
+static CommandList_struct *cmd_special_alloc(ctlr_info_t *h)
+{
+ CommandList_struct *c;
+ u64bit temp64;
+ dma_addr_t cmd_dma_handle, err_dma_handle;
+
+ c = (CommandList_struct *) pci_alloc_consistent(h->pdev,
+ sizeof(CommandList_struct), &cmd_dma_handle);
+ if (c == NULL)
+ return NULL;
+ memset(c, 0, sizeof(CommandList_struct));
+
+ c->cmdindex = -1;
+
+ c->err_info = (ErrorInfo_struct *)
+ pci_alloc_consistent(h->pdev, sizeof(ErrorInfo_struct),
+ &err_dma_handle);
+
+ if (c->err_info == NULL) {
+ pci_free_consistent(h->pdev,
+ sizeof(CommandList_struct), c, cmd_dma_handle);
+ return NULL;
}
+ memset(c->err_info, 0, sizeof(ErrorInfo_struct));
INIT_HLIST_NODE(&c->list);
c->busaddr = (__u32) cmd_dma_handle;
return c;
}
-/*
- * Frees a command block that was previously allocated with cmd_alloc().
- */
-static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool)
+static void cmd_free(ctlr_info_t *h, CommandList_struct *c)
{
int i;
+
+ i = c - h->cmd_pool;
+ clear_bit(i & (BITS_PER_LONG - 1),
+ h->cmd_pool_bits + (i / BITS_PER_LONG));
+ h->nr_frees++;
+}
+
+static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c)
+{
u64bit temp64;
- if (!got_from_pool) {
- temp64.val32.lower = c->ErrDesc.Addr.lower;
- temp64.val32.upper = c->ErrDesc.Addr.upper;
- pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct),
- c->err_info, (dma_addr_t) temp64.val);
- pci_free_consistent(h->pdev, sizeof(CommandList_struct),
- c, (dma_addr_t) c->busaddr);
- } else {
- i = c - h->cmd_pool;
- clear_bit(i & (BITS_PER_LONG - 1),
- h->cmd_pool_bits + (i / BITS_PER_LONG));
- h->nr_frees++;
- }
+ temp64.val32.lower = c->ErrDesc.Addr.lower;
+ temp64.val32.upper = c->ErrDesc.Addr.upper;
+ pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct),
+ c->err_info, (dma_addr_t) temp64.val);
+ pci_free_consistent(h->pdev, sizeof(CommandList_struct),
+ c, (dma_addr_t) c->busaddr);
}
static inline ctlr_info_t *get_host(struct gendisk *disk)
*/
static int cciss_open(struct block_device *bdev, fmode_t mode)
{
- ctlr_info_t *host = get_host(bdev->bd_disk);
+ ctlr_info_t *h = get_host(bdev->bd_disk);
drive_info_struct *drv = get_drv(bdev->bd_disk);
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name);
-#endif /* CCISS_DEBUG */
-
+ dev_dbg(&h->pdev->dev, "cciss_open %s\n", bdev->bd_disk->disk_name);
if (drv->busy_configuring)
return -EBUSY;
/*
return -EPERM;
}
drv->usage_count++;
- host->usage_count++;
+ h->usage_count++;
return 0;
}
+static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = cciss_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
/*
* Close. Sync first.
*/
static int cciss_release(struct gendisk *disk, fmode_t mode)
{
- ctlr_info_t *host = get_host(disk);
- drive_info_struct *drv = get_drv(disk);
-
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_release %s\n", disk->disk_name);
-#endif /* CCISS_DEBUG */
+ ctlr_info_t *h;
+ drive_info_struct *drv;
+ lock_kernel();
+ h = get_host(disk);
+ drv = get_drv(disk);
+ dev_dbg(&h->pdev->dev, "cciss_release %s\n", disk->disk_name);
drv->usage_count--;
- host->usage_count--;
+ h->usage_count--;
+ unlock_kernel();
return 0;
}
-#ifdef CONFIG_COMPAT
-
static int do_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
return ret;
}
+#ifdef CONFIG_COMPAT
+
static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg);
static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
return 0;
}
-static void check_ioctl_unit_attention(ctlr_info_t *host, CommandList_struct *c)
+static void check_ioctl_unit_attention(ctlr_info_t *h, CommandList_struct *c)
{
if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION)
- (void)check_for_unit_attention(host, c);
+ (void)check_for_unit_attention(h, c);
}
/*
* ioctl
unsigned int cmd, unsigned long arg)
{
struct gendisk *disk = bdev->bd_disk;
- ctlr_info_t *host = get_host(disk);
+ ctlr_info_t *h = get_host(disk);
drive_info_struct *drv = get_drv(disk);
- int ctlr = host->ctlr;
void __user *argp = (void __user *)arg;
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg);
-#endif /* CCISS_DEBUG */
-
+ dev_dbg(&h->pdev->dev, "cciss_ioctl: Called with cmd=%x %lx\n",
+ cmd, arg);
switch (cmd) {
case CCISS_GETPCIINFO:
{
if (!arg)
return -EINVAL;
- pciinfo.domain = pci_domain_nr(host->pdev->bus);
- pciinfo.bus = host->pdev->bus->number;
- pciinfo.dev_fn = host->pdev->devfn;
- pciinfo.board_id = host->board_id;
+ pciinfo.domain = pci_domain_nr(h->pdev->bus);
+ pciinfo.bus = h->pdev->bus->number;
+ pciinfo.dev_fn = h->pdev->devfn;
+ pciinfo.board_id = h->board_id;
if (copy_to_user
(argp, &pciinfo, sizeof(cciss_pci_info_struct)))
return -EFAULT;
if (!arg)
return -EINVAL;
intinfo.delay =
- readl(&host->cfgtable->HostWrite.CoalIntDelay);
+ readl(&h->cfgtable->HostWrite.CoalIntDelay);
intinfo.count =
- readl(&host->cfgtable->HostWrite.CoalIntCount);
+ readl(&h->cfgtable->HostWrite.CoalIntCount);
if (copy_to_user
(argp, &intinfo, sizeof(cciss_coalint_struct)))
return -EFAULT;
(&intinfo, argp, sizeof(cciss_coalint_struct)))
return -EFAULT;
if ((intinfo.delay == 0) && (intinfo.count == 0))
- {
-// printk("cciss_ioctl: delay and count cannot be 0\n");
return -EINVAL;
- }
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
/* Update the field, and then ring the doorbell */
writel(intinfo.delay,
- &(host->cfgtable->HostWrite.CoalIntDelay));
+ &(h->cfgtable->HostWrite.CoalIntDelay));
writel(intinfo.count,
- &(host->cfgtable->HostWrite.CoalIntCount));
- writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
+ &(h->cfgtable->HostWrite.CoalIntCount));
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
- if (!(readl(host->vaddr + SA5_DOORBELL)
+ if (!(readl(h->vaddr + SA5_DOORBELL)
& CFGTBL_ChangeReq))
break;
/* delay and try again */
udelay(1000);
}
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (i >= MAX_IOCTL_CONFIG_WAIT)
return -EAGAIN;
return 0;
return -EINVAL;
for (i = 0; i < 16; i++)
NodeName[i] =
- readb(&host->cfgtable->ServerName[i]);
+ readb(&h->cfgtable->ServerName[i]);
if (copy_to_user(argp, NodeName, sizeof(NodeName_type)))
return -EFAULT;
return 0;
(NodeName, argp, sizeof(NodeName_type)))
return -EFAULT;
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
/* Update the field, and then ring the doorbell */
for (i = 0; i < 16; i++)
writeb(NodeName[i],
- &host->cfgtable->ServerName[i]);
+ &h->cfgtable->ServerName[i]);
- writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
- if (!(readl(host->vaddr + SA5_DOORBELL)
+ if (!(readl(h->vaddr + SA5_DOORBELL)
& CFGTBL_ChangeReq))
break;
/* delay and try again */
udelay(1000);
}
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (i >= MAX_IOCTL_CONFIG_WAIT)
return -EAGAIN;
return 0;
if (!arg)
return -EINVAL;
- heartbeat = readl(&host->cfgtable->HeartBeat);
+ heartbeat = readl(&h->cfgtable->HeartBeat);
if (copy_to_user
(argp, &heartbeat, sizeof(Heartbeat_type)))
return -EFAULT;
if (!arg)
return -EINVAL;
- BusTypes = readl(&host->cfgtable->BusTypes);
+ BusTypes = readl(&h->cfgtable->BusTypes);
if (copy_to_user
(argp, &BusTypes, sizeof(BusTypes_type)))
return -EFAULT;
if (!arg)
return -EINVAL;
- memcpy(firmware, host->firm_ver, 4);
+ memcpy(firmware, h->firm_ver, 4);
if (copy_to_user
(argp, firmware, sizeof(FirmwareVer_type)))
case CCISS_DEREGDISK:
case CCISS_REGNEWD:
case CCISS_REVALIDVOLS:
- return rebuild_lun_table(host, 0, 1);
+ return rebuild_lun_table(h, 0, 1);
case CCISS_GETLUNINFO:{
LogvolInfo_struct luninfo;
CommandList_struct *c;
char *buff = NULL;
u64bit temp64;
- unsigned long flags;
DECLARE_COMPLETION_ONSTACK(wait);
if (!arg)
} else {
memset(buff, 0, iocommand.buf_size);
}
- if ((c = cmd_alloc(host, 0)) == NULL) {
+ c = cmd_special_alloc(h);
+ if (!c) {
kfree(buff);
return -ENOMEM;
}
/* Fill in the scatter gather information */
if (iocommand.buf_size > 0) {
- temp64.val = pci_map_single(host->pdev, buff,
+ temp64.val = pci_map_single(h->pdev, buff,
iocommand.buf_size,
PCI_DMA_BIDIRECTIONAL);
c->SG[0].Addr.lower = temp64.val32.lower;
}
c->waiting = &wait;
- /* Put the request on the tail of the request queue */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- addQ(&host->reqQ, c);
- host->Qdepth++;
- start_io(host);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
-
+ enqueue_cmd_and_start_io(h, c);
wait_for_completion(&wait);
/* unlock the buffers from DMA */
temp64.val32.lower = c->SG[0].Addr.lower;
temp64.val32.upper = c->SG[0].Addr.upper;
- pci_unmap_single(host->pdev, (dma_addr_t) temp64.val,
+ pci_unmap_single(h->pdev, (dma_addr_t) temp64.val,
iocommand.buf_size,
PCI_DMA_BIDIRECTIONAL);
- check_ioctl_unit_attention(host, c);
+ check_ioctl_unit_attention(h, c);
/* Copy the error information out */
iocommand.error_info = *(c->err_info);
if (copy_to_user
(argp, &iocommand, sizeof(IOCTL_Command_struct))) {
kfree(buff);
- cmd_free(host, c, 0);
+ cmd_special_free(h, c);
return -EFAULT;
}
if (copy_to_user
(iocommand.buf, buff, iocommand.buf_size)) {
kfree(buff);
- cmd_free(host, c, 0);
+ cmd_special_free(h, c);
return -EFAULT;
}
}
kfree(buff);
- cmd_free(host, c, 0);
+ cmd_special_free(h, c);
return 0;
}
case CCISS_BIG_PASSTHRU:{
unsigned char **buff = NULL;
int *buff_size = NULL;
u64bit temp64;
- unsigned long flags;
BYTE sg_used = 0;
int status = 0;
int i;
data_ptr += sz;
sg_used++;
}
- if ((c = cmd_alloc(host, 0)) == NULL) {
+ c = cmd_special_alloc(h);
+ if (!c) {
status = -ENOMEM;
goto cleanup1;
}
if (ioc->buf_size > 0) {
for (i = 0; i < sg_used; i++) {
temp64.val =
- pci_map_single(host->pdev, buff[i],
+ pci_map_single(h->pdev, buff[i],
buff_size[i],
PCI_DMA_BIDIRECTIONAL);
c->SG[i].Addr.lower =
}
}
c->waiting = &wait;
- /* Put the request on the tail of the request queue */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- addQ(&host->reqQ, c);
- host->Qdepth++;
- start_io(host);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ enqueue_cmd_and_start_io(h, c);
wait_for_completion(&wait);
/* unlock the buffers from DMA */
for (i = 0; i < sg_used; i++) {
temp64.val32.lower = c->SG[i].Addr.lower;
temp64.val32.upper = c->SG[i].Addr.upper;
- pci_unmap_single(host->pdev,
+ pci_unmap_single(h->pdev,
(dma_addr_t) temp64.val, buff_size[i],
PCI_DMA_BIDIRECTIONAL);
}
- check_ioctl_unit_attention(host, c);
+ check_ioctl_unit_attention(h, c);
/* Copy the error information out */
ioc->error_info = *(c->err_info);
if (copy_to_user(argp, ioc, sizeof(*ioc))) {
- cmd_free(host, c, 0);
+ cmd_special_free(h, c);
status = -EFAULT;
goto cleanup1;
}
for (i = 0; i < sg_used; i++) {
if (copy_to_user
(ptr, buff[i], buff_size[i])) {
- cmd_free(host, c, 0);
+ cmd_special_free(h, c);
status = -EFAULT;
goto cleanup1;
}
ptr += buff_size[i];
}
}
- cmd_free(host, c, 0);
+ cmd_special_free(h, c);
status = 0;
cleanup1:
if (buff) {
static void cciss_softirq_done(struct request *rq)
{
- CommandList_struct *cmd = rq->completion_data;
- ctlr_info_t *h = hba[cmd->ctlr];
- SGDescriptor_struct *curr_sg = cmd->SG;
- unsigned long flags;
+ CommandList_struct *c = rq->completion_data;
+ ctlr_info_t *h = hba[c->ctlr];
+ SGDescriptor_struct *curr_sg = c->SG;
u64bit temp64;
+ unsigned long flags;
int i, ddir;
int sg_index = 0;
- if (cmd->Request.Type.Direction == XFER_READ)
+ if (c->Request.Type.Direction == XFER_READ)
ddir = PCI_DMA_FROMDEVICE;
else
ddir = PCI_DMA_TODEVICE;
/* command did not need to be retried */
/* unmap the DMA mapping for all the scatter gather elements */
- for (i = 0; i < cmd->Header.SGList; i++) {
+ for (i = 0; i < c->Header.SGList; i++) {
if (curr_sg[sg_index].Ext == CCISS_SG_CHAIN) {
- cciss_unmap_sg_chain_block(h, cmd);
+ cciss_unmap_sg_chain_block(h, c);
/* Point to the next block */
- curr_sg = h->cmd_sg_list[cmd->cmdindex];
+ curr_sg = h->cmd_sg_list[c->cmdindex];
sg_index = 0;
}
temp64.val32.lower = curr_sg[sg_index].Addr.lower;
++sg_index;
}
-#ifdef CCISS_DEBUG
- printk("Done with %p\n", rq);
-#endif /* CCISS_DEBUG */
+ dev_dbg(&h->pdev->dev, "Done with %p\n", rq);
/* set the residual count for pc requests */
- if (blk_pc_request(rq))
- rq->resid_len = cmd->err_info->ResidualCnt;
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
+ rq->resid_len = c->err_info->ResidualCnt;
blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO);
spin_lock_irqsave(&h->lock, flags);
- cmd_free(h, cmd, 1);
+ cmd_free(h, c);
cciss_check_queues(h);
spin_unlock_irqrestore(&h->lock, flags);
}
* via the inquiry page 0. Model, vendor, and rev are set to empty strings if
* they cannot be read.
*/
-static void cciss_get_device_descr(int ctlr, int logvol,
+static void cciss_get_device_descr(ctlr_info_t *h, int logvol,
char *vendor, char *model, char *rev)
{
int rc;
if (!inq_buf)
return;
- log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf, sizeof(*inq_buf), 0,
+ log_unit_to_scsi3addr(h, scsi3addr, logvol);
+ rc = sendcmd_withirq(h, CISS_INQUIRY, inq_buf, sizeof(*inq_buf), 0,
scsi3addr, TYPE_CMD);
if (rc == IO_OK) {
memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN);
* number cannot be had, for whatever reason, 16 bytes of 0xff
* are returned instead.
*/
-static void cciss_get_serial_no(int ctlr, int logvol,
+static void cciss_get_serial_no(ctlr_info_t *h, int logvol,
unsigned char *serial_no, int buflen)
{
#define PAGE_83_INQ_BYTES 64
if (!buf)
return;
memset(serial_no, 0, buflen);
- log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
+ log_unit_to_scsi3addr(h, scsi3addr, logvol);
+ rc = sendcmd_withirq(h, CISS_INQUIRY, buf,
PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
if (rc == IO_OK)
memcpy(serial_no, &buf[8], buflen);
* is also the controller node. Any changes to disk 0 will show up on
* the next reboot.
*/
-static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
- int via_ioctl)
+static void cciss_update_drive_info(ctlr_info_t *h, int drv_index,
+ int first_time, int via_ioctl)
{
- ctlr_info_t *h = hba[ctlr];
struct gendisk *disk;
InquiryData_struct *inq_buff = NULL;
unsigned int block_size;
/* testing to see if 16-byte CDBs are already being used */
if (h->cciss_read == CCISS_READ_16) {
- cciss_read_capacity_16(h->ctlr, drv_index,
+ cciss_read_capacity_16(h, drv_index,
&total_size, &block_size);
} else {
- cciss_read_capacity(ctlr, drv_index, &total_size, &block_size);
+ cciss_read_capacity(h, drv_index, &total_size, &block_size);
/* if read_capacity returns all F's this volume is >2TB */
/* in size so we switch to 16-byte CDB's for all */
/* read/write ops */
if (total_size == 0xFFFFFFFFULL) {
- cciss_read_capacity_16(ctlr, drv_index,
+ cciss_read_capacity_16(h, drv_index,
&total_size, &block_size);
h->cciss_read = CCISS_READ_16;
h->cciss_write = CCISS_WRITE_16;
}
}
- cciss_geometry_inquiry(ctlr, drv_index, total_size, block_size,
+ cciss_geometry_inquiry(h, drv_index, total_size, block_size,
inq_buff, drvinfo);
drvinfo->block_size = block_size;
drvinfo->nr_blocks = total_size + 1;
- cciss_get_device_descr(ctlr, drv_index, drvinfo->vendor,
+ cciss_get_device_descr(h, drv_index, drvinfo->vendor,
drvinfo->model, drvinfo->rev);
- cciss_get_serial_no(ctlr, drv_index, drvinfo->serial_no,
+ cciss_get_serial_no(h, drv_index, drvinfo->serial_no,
sizeof(drvinfo->serial_no));
/* Save the lunid in case we deregister the disk, below. */
memcpy(drvinfo->LunID, h->drv[drv_index]->LunID,
* (unless it's the first disk (for the controller node).
*/
if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) {
- printk(KERN_WARNING "disk %d has changed.\n", drv_index);
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ dev_warn(&h->pdev->dev, "disk %d has changed.\n", drv_index);
+ spin_lock_irqsave(&h->lock, flags);
h->drv[drv_index]->busy_configuring = 1;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
/* deregister_disk sets h->drv[drv_index]->queue = NULL
* which keeps the interrupt handler from starting
if (cciss_add_disk(h, disk, drv_index) != 0) {
cciss_free_gendisk(h, drv_index);
cciss_free_drive_info(h, drv_index);
- printk(KERN_WARNING "cciss:%d could not update "
- "disk %d\n", h->ctlr, drv_index);
+ dev_warn(&h->pdev->dev, "could not update disk %d\n",
+ drv_index);
--h->num_luns;
}
}
kfree(drvinfo);
return;
mem_msg:
- printk(KERN_ERR "cciss: out of memory\n");
+ dev_err(&h->pdev->dev, "out of memory\n");
goto freeret;
}
h->gendisk[drv_index] =
alloc_disk(1 << NWD_SHIFT);
if (!h->gendisk[drv_index]) {
- printk(KERN_ERR "cciss%d: could not "
- "allocate a new disk %d\n",
- h->ctlr, drv_index);
+ dev_err(&h->pdev->dev,
+ "could not allocate a new disk %d\n",
+ drv_index);
goto err_free_drive_info;
}
}
cciss_free_gendisk(h, drv_index);
cciss_free_drive_info(h, drv_index);
error:
- printk(KERN_WARNING "cciss%d: could not "
- "add disk 0.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "could not add disk 0.\n");
return;
}
static int rebuild_lun_table(ctlr_info_t *h, int first_time,
int via_ioctl)
{
- int ctlr = h->ctlr;
int num_luns;
ReportLunData_struct *ld_buff = NULL;
int return_code;
return -EPERM;
/* Set busy_configuring flag for this operation */
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return -EBUSY;
}
h->busy_configuring = 1;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
if (ld_buff == NULL)
goto mem_msg;
- return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
+ return_code = sendcmd_withirq(h, CISS_REPORT_LOG, ld_buff,
sizeof(ReportLunData_struct),
0, CTLR_LUNID, TYPE_CMD);
if (return_code == IO_OK)
listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
else { /* reading number of logical volumes failed */
- printk(KERN_WARNING "cciss: report logical volume"
- " command failed\n");
+ dev_warn(&h->pdev->dev,
+ "report logical volume command failed\n");
listlength = 0;
goto freeret;
}
num_luns = listlength / 8; /* 8 bytes per entry */
if (num_luns > CISS_MAX_LUN) {
num_luns = CISS_MAX_LUN;
- printk(KERN_WARNING "cciss: more luns configured"
+ dev_warn(&h->pdev->dev, "more luns configured"
" on controller than can be handled by"
" this driver.\n");
}
}
if (!drv_found) {
/* Deregister it from the OS, it's gone. */
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
h->drv[i]->busy_configuring = 1;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return_code = deregister_disk(h, i, 1, via_ioctl);
if (h->drv[i] != NULL)
h->drv[i]->busy_configuring = 0;
if (drv_index == -1)
goto freeret;
}
- cciss_update_drive_info(ctlr, drv_index, first_time,
- via_ioctl);
+ cciss_update_drive_info(h, drv_index, first_time, via_ioctl);
} /* end for */
freeret:
*/
return -1;
mem_msg:
- printk(KERN_ERR "cciss: out of memory\n");
+ dev_err(&h->pdev->dev, "out of memory\n");
h->busy_configuring = 0;
goto freeret;
}
return 0;
}
-static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
+static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
size_t size, __u8 page_code, unsigned char *scsi3addr,
int cmd_type)
{
- ctlr_info_t *h = hba[ctlr];
u64bit buff_dma_handle;
int status = IO_OK;
c->Request.Timeout = 0;
break;
default:
- printk(KERN_WARNING
- "cciss%d: Unknown Command 0x%c\n", ctlr, cmd);
+ dev_warn(&h->pdev->dev, "Unknown Command 0x%c\n", cmd);
return IO_ERROR;
}
} else if (cmd_type == TYPE_MSG) {
c->Request.CDB[0] = cmd;
break;
default:
- printk(KERN_WARNING
- "cciss%d: unknown message type %d\n", ctlr, cmd);
+ dev_warn(&h->pdev->dev,
+ "unknown message type %d\n", cmd);
return IO_ERROR;
}
} else {
- printk(KERN_WARNING
- "cciss%d: unknown command type %d\n", ctlr, cmd_type);
+ dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type);
return IO_ERROR;
}
/* Fill in the scatter gather information */
default:
if (check_for_unit_attention(h, c))
return IO_NEEDS_RETRY;
- printk(KERN_WARNING "cciss%d: cmd 0x%02x "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x "
"check condition, sense key = 0x%02x\n",
- h->ctlr, c->Request.CDB[0],
- c->err_info->SenseInfo[2]);
+ c->Request.CDB[0], c->err_info->SenseInfo[2]);
}
break;
default:
- printk(KERN_WARNING "cciss%d: cmd 0x%02x"
- "scsi status = 0x%02x\n", h->ctlr,
+ dev_warn(&h->pdev->dev, "cmd 0x%02x"
+ "scsi status = 0x%02x\n",
c->Request.CDB[0], c->err_info->ScsiStatus);
break;
}
/* expected for inquiry and report lun commands */
break;
case CMD_INVALID:
- printk(KERN_WARNING "cciss: cmd 0x%02x is "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x is "
"reported invalid\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cmd 0x%02x has "
- "protocol error \n", c->Request.CDB[0]);
+ dev_warn(&h->pdev->dev, "cmd 0x%02x has "
+ "protocol error\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_HARDWARE_ERR:
- printk(KERN_WARNING "cciss: cmd 0x%02x had "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x had "
" hardware error\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cmd 0x%02x had "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x had "
"connection lost\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cmd 0x%02x was "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x was "
"aborted\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cmd 0x%02x reports "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x reports "
"abort failed\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING
- "cciss%d: unsolicited abort 0x%02x\n", h->ctlr,
+ dev_warn(&h->pdev->dev, "unsolicited abort 0x%02x\n",
c->Request.CDB[0]);
return_status = IO_NEEDS_RETRY;
break;
default:
- printk(KERN_WARNING "cciss: cmd 0x%02x returned "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x returned "
"unknown status %x\n", c->Request.CDB[0],
c->err_info->CommandStatus);
return_status = IO_ERROR;
{
DECLARE_COMPLETION_ONSTACK(wait);
u64bit buff_dma_handle;
- unsigned long flags;
int return_status = IO_OK;
resend_cmd2:
c->waiting = &wait;
- /* Put the request on the tail of the queue and send it */
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
- addQ(&h->reqQ, c);
- h->Qdepth++;
- start_io(h);
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ enqueue_cmd_and_start_io(h, c);
wait_for_completion(&wait);
if (return_status == IO_NEEDS_RETRY &&
c->retry_count < MAX_CMD_RETRIES) {
- printk(KERN_WARNING "cciss%d: retrying 0x%02x\n", h->ctlr,
+ dev_warn(&h->pdev->dev, "retrying 0x%02x\n",
c->Request.CDB[0]);
c->retry_count++;
/* erase the old error information */
return return_status;
}
-static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
+static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
__u8 page_code, unsigned char scsi3addr[],
int cmd_type)
{
- ctlr_info_t *h = hba[ctlr];
CommandList_struct *c;
int return_status;
- c = cmd_alloc(h, 0);
+ c = cmd_special_alloc(h);
if (!c)
return -ENOMEM;
- return_status = fill_cmd(c, cmd, ctlr, buff, size, page_code,
+ return_status = fill_cmd(h, c, cmd, buff, size, page_code,
scsi3addr, cmd_type);
if (return_status == IO_OK)
return_status = sendcmd_withirq_core(h, c, 1);
- cmd_free(h, c, 0);
+ cmd_special_free(h, c);
return return_status;
}
-static void cciss_geometry_inquiry(int ctlr, int logvol,
+static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol,
sector_t total_size,
unsigned int block_size,
InquiryData_struct *inq_buff,
unsigned char scsi3addr[8];
memset(inq_buff, 0, sizeof(InquiryData_struct));
- log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- return_code = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buff,
+ log_unit_to_scsi3addr(h, scsi3addr, logvol);
+ return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff,
sizeof(*inq_buff), 0xC1, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
if (inq_buff->data_byte[8] == 0xFF) {
- printk(KERN_WARNING
- "cciss: reading geometry failed, volume "
+ dev_warn(&h->pdev->dev,
+ "reading geometry failed, volume "
"does not support reading geometry\n");
drv->heads = 255;
drv->sectors = 32; /* Sectors per track */
drv->cylinders = real_size;
}
} else { /* Get geometry failed */
- printk(KERN_WARNING "cciss: reading geometry failed\n");
+ dev_warn(&h->pdev->dev, "reading geometry failed\n");
}
}
static void
-cciss_read_capacity(int ctlr, int logvol, sector_t *total_size,
+cciss_read_capacity(ctlr_info_t *h, int logvol, sector_t *total_size,
unsigned int *block_size)
{
ReadCapdata_struct *buf;
buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
if (!buf) {
- printk(KERN_WARNING "cciss: out of memory\n");
+ dev_warn(&h->pdev->dev, "out of memory\n");
return;
}
- log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- return_code = sendcmd_withirq(CCISS_READ_CAPACITY, ctlr, buf,
+ log_unit_to_scsi3addr(h, scsi3addr, logvol);
+ return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY, buf,
sizeof(ReadCapdata_struct), 0, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
*total_size = be32_to_cpu(*(__be32 *) buf->total_size);
*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
} else { /* read capacity command failed */
- printk(KERN_WARNING "cciss: read capacity failed\n");
+ dev_warn(&h->pdev->dev, "read capacity failed\n");
*total_size = 0;
*block_size = BLOCK_SIZE;
}
kfree(buf);
}
-static void cciss_read_capacity_16(int ctlr, int logvol,
+static void cciss_read_capacity_16(ctlr_info_t *h, int logvol,
sector_t *total_size, unsigned int *block_size)
{
ReadCapdata_struct_16 *buf;
buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
if (!buf) {
- printk(KERN_WARNING "cciss: out of memory\n");
+ dev_warn(&h->pdev->dev, "out of memory\n");
return;
}
- log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
- ctlr, buf, sizeof(ReadCapdata_struct_16),
+ log_unit_to_scsi3addr(h, scsi3addr, logvol);
+ return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY_16,
+ buf, sizeof(ReadCapdata_struct_16),
0, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
*total_size = be64_to_cpu(*(__be64 *) buf->total_size);
*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
} else { /* read capacity command failed */
- printk(KERN_WARNING "cciss: read capacity failed\n");
+ dev_warn(&h->pdev->dev, "read capacity failed\n");
*total_size = 0;
*block_size = BLOCK_SIZE;
}
- printk(KERN_INFO " blocks= %llu block_size= %d\n",
+ dev_info(&h->pdev->dev, " blocks= %llu block_size= %d\n",
(unsigned long long)*total_size+1, *block_size);
kfree(buf);
}
inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
if (inq_buff == NULL) {
- printk(KERN_WARNING "cciss: out of memory\n");
+ dev_warn(&h->pdev->dev, "out of memory\n");
return 1;
}
if (h->cciss_read == CCISS_READ_10) {
- cciss_read_capacity(h->ctlr, logvol,
+ cciss_read_capacity(h, logvol,
&total_size, &block_size);
} else {
- cciss_read_capacity_16(h->ctlr, logvol,
+ cciss_read_capacity_16(h, logvol,
&total_size, &block_size);
}
- cciss_geometry_inquiry(h->ctlr, logvol, total_size, block_size,
+ cciss_geometry_inquiry(h, logvol, total_size, block_size,
inq_buff, drv);
blk_queue_logical_block_size(drv->queue, drv->block_size);
c = hlist_entry(h->reqQ.first, CommandList_struct, list);
/* can't do anything if fifo is full */
if ((h->access.fifo_full(h))) {
- printk(KERN_WARNING "cciss: fifo full\n");
+ dev_warn(&h->pdev->dev, "fifo full\n");
break;
}
}
}
-/* Assumes that CCISS_LOCK(h->ctlr) is held. */
+/* Assumes that h->lock is held. */
/* Zeros out the error record and then resends the command back */
/* to the controller */
static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c)
driver_byte = DRIVER_OK;
msg_byte = cmd->err_info->CommandStatus; /* correct? seems too device specific */
- if (blk_pc_request(cmd->rq))
+ if (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC)
host_byte = DID_PASSTHROUGH;
else
host_byte = DID_OK;
host_byte, driver_byte);
if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) {
- if (!blk_pc_request(cmd->rq))
- printk(KERN_WARNING "cciss: cmd %p "
+ if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC)
+ dev_warn(&h->pdev->dev, "cmd %p "
"has SCSI Status 0x%x\n",
cmd, cmd->err_info->ScsiStatus);
return error_value;
/* check the sense key */
sense_key = 0xf & cmd->err_info->SenseInfo[2];
/* no status or recovered error */
- if (((sense_key == 0x0) || (sense_key == 0x1)) && !blk_pc_request(cmd->rq))
+ if (((sense_key == 0x0) || (sense_key == 0x1)) &&
+ (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC))
error_value = 0;
if (check_for_unit_attention(h, cmd)) {
- *retry_cmd = !blk_pc_request(cmd->rq);
+ *retry_cmd = !(cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC);
return 0;
}
- if (!blk_pc_request(cmd->rq)) { /* Not SG_IO or similar? */
+ /* Not SG_IO or similar? */
+ if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC) {
if (error_value != 0)
- printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION"
+ dev_warn(&h->pdev->dev, "cmd %p has CHECK CONDITION"
" sense key = 0x%x\n", cmd, sense_key);
return error_value;
}
rq->errors = evaluate_target_status(h, cmd, &retry_cmd);
break;
case CMD_DATA_UNDERRUN:
- if (blk_fs_request(cmd->rq)) {
- printk(KERN_WARNING "cciss: cmd %p has"
+ if (cmd->rq->cmd_type == REQ_TYPE_FS) {
+ dev_warn(&h->pdev->dev, "cmd %p has"
" completed with data underrun "
"reported\n", cmd);
cmd->rq->resid_len = cmd->err_info->ResidualCnt;
}
break;
case CMD_DATA_OVERRUN:
- if (blk_fs_request(cmd->rq))
- printk(KERN_WARNING "cciss: cmd %p has"
+ if (cmd->rq->cmd_type == REQ_TYPE_FS)
+ dev_warn(&h->pdev->dev, "cciss: cmd %p has"
" completed with data overrun "
"reported\n", cmd);
break;
case CMD_INVALID:
- printk(KERN_WARNING "cciss: cmd %p is "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p is "
"reported invalid\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cmd %p has "
- "protocol error \n", cmd);
+ dev_warn(&h->pdev->dev, "cciss: cmd %p has "
+ "protocol error\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_HARDWARE_ERR:
- printk(KERN_WARNING "cciss: cmd %p had "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p had "
" hardware error\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cmd %p had "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p had "
"connection lost\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cmd %p was "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p was "
"aborted\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ABORT);
break;
case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cmd %p reports "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p reports "
"abort failed\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING "cciss%d: unsolicited "
+ dev_warn(&h->pdev->dev, "cciss%d: unsolicited "
"abort %p\n", h->ctlr, cmd);
if (cmd->retry_count < MAX_CMD_RETRIES) {
retry_cmd = 1;
- printk(KERN_WARNING
- "cciss%d: retrying %p\n", h->ctlr, cmd);
+ dev_warn(&h->pdev->dev, "retrying %p\n", cmd);
cmd->retry_count++;
} else
- printk(KERN_WARNING
- "cciss%d: %p retried too "
- "many times\n", h->ctlr, cmd);
+ dev_warn(&h->pdev->dev,
+ "%p retried too many times\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ABORT);
break;
case CMD_TIMEOUT:
- printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
+ dev_warn(&h->pdev->dev, "cmd %p timedout\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
default:
- printk(KERN_WARNING "cciss: cmd %p returned "
+ dev_warn(&h->pdev->dev, "cmd %p returned "
"unknown status %x\n", cmd,
cmd->err_info->CommandStatus);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
}
after_error_processing:
blk_complete_request(cmd->rq);
}
+static inline u32 cciss_tag_contains_index(u32 tag)
+{
+#define DIRECT_LOOKUP_BIT 0x10
+ return tag & DIRECT_LOOKUP_BIT;
+}
+
+static inline u32 cciss_tag_to_index(u32 tag)
+{
+#define DIRECT_LOOKUP_SHIFT 5
+ return tag >> DIRECT_LOOKUP_SHIFT;
+}
+
+static inline u32 cciss_tag_discard_error_bits(u32 tag)
+{
+#define CCISS_ERROR_BITS 0x03
+ return tag & ~CCISS_ERROR_BITS;
+}
+
+static inline void cciss_mark_tag_indexed(u32 *tag)
+{
+ *tag |= DIRECT_LOOKUP_BIT;
+}
+
+static inline void cciss_set_tag_index(u32 *tag, u32 index)
+{
+ *tag |= (index << DIRECT_LOOKUP_SHIFT);
+}
+
/*
* Get a request and submit it to the controller.
*/
BUG_ON(creq->nr_phys_segments > h->maxsgentries);
- if ((c = cmd_alloc(h, 1)) == NULL)
+ c = cmd_alloc(h);
+ if (!c)
goto full;
blk_start_request(creq);
/* got command from pool, so use the command block index instead */
/* for direct lookups. */
/* The first 2 bits are reserved for controller error reporting. */
- c->Header.Tag.lower = (c->cmdindex << 3);
- c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */
+ cciss_set_tag_index(&c->Header.Tag.lower, c->cmdindex);
+ cciss_mark_tag_indexed(&c->Header.Tag.lower);
memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID));
c->Request.CDBLen = 10; /* 12 byte commands not in FW yet; */
c->Request.Type.Type = TYPE_CMD; /* It is a command. */
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
start_blk = blk_rq_pos(creq);
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n",
+ dev_dbg(&h->pdev->dev, "sector =%d nr_sectors=%d\n",
(int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
-#endif /* CCISS_DEBUG */
-
sg_init_table(tmp_sg, h->maxsgentries);
seg = blk_rq_map_sg(q, creq, tmp_sg);
if (seg > h->maxSG)
h->maxSG = seg;
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %ld sectors in %d segments "
+ dev_dbg(&h->pdev->dev, "Submitting %u sectors in %d segments "
"chained[%d]\n",
blk_rq_sectors(creq), seg, chained);
-#endif /* CCISS_DEBUG */
- c->Header.SGList = c->Header.SGTotal = seg + chained;
- if (seg > h->max_cmd_sgentries)
+ c->Header.SGTotal = seg + chained;
+ if (seg <= h->max_cmd_sgentries)
+ c->Header.SGList = c->Header.SGTotal;
+ else
c->Header.SGList = h->max_cmd_sgentries;
+ set_performant_mode(h, c);
- if (likely(blk_fs_request(creq))) {
+ if (likely(creq->cmd_type == REQ_TYPE_FS)) {
if(h->cciss_read == CCISS_READ_10) {
c->Request.CDB[1] = 0;
c->Request.CDB[2] = (start_blk >> 24) & 0xff; /* MSB */
c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff;
c->Request.CDB[14] = c->Request.CDB[15] = 0;
}
- } else if (blk_pc_request(creq)) {
+ } else if (creq->cmd_type == REQ_TYPE_BLOCK_PC) {
c->Request.CDBLen = creq->cmd_len;
memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB);
} else {
- printk(KERN_WARNING "cciss%d: bad request type %d\n", h->ctlr, creq->cmd_type);
+ dev_warn(&h->pdev->dev, "bad request type %d\n",
+ creq->cmd_type);
BUG();
}
static inline long interrupt_not_for_us(ctlr_info_t *h)
{
- return (((h->access.intr_pending(h) == 0) ||
- (h->interrupts_enabled == 0)));
+ return ((h->access.intr_pending(h) == 0) ||
+ (h->interrupts_enabled == 0));
}
-static irqreturn_t do_cciss_intr(int irq, void *dev_id)
+static inline int bad_tag(ctlr_info_t *h, u32 tag_index,
+ u32 raw_tag)
{
- ctlr_info_t *h = dev_id;
+ if (unlikely(tag_index >= h->nr_cmds)) {
+ dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag);
+ return 1;
+ }
+ return 0;
+}
+
+static inline void finish_cmd(ctlr_info_t *h, CommandList_struct *c,
+ u32 raw_tag)
+{
+ removeQ(c);
+ if (likely(c->cmd_type == CMD_RWREQ))
+ complete_command(h, c, 0);
+ else if (c->cmd_type == CMD_IOCTL_PEND)
+ complete(c->waiting);
+#ifdef CONFIG_CISS_SCSI_TAPE
+ else if (c->cmd_type == CMD_SCSI)
+ complete_scsi_command(c, 0, raw_tag);
+#endif
+}
+
+static inline u32 next_command(ctlr_info_t *h)
+{
+ u32 a;
+
+ if (unlikely(h->transMethod != CFGTBL_Trans_Performant))
+ return h->access.command_completed(h);
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ a = *(h->reply_pool_head); /* Next cmd in ring buffer */
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ a = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+ return a;
+}
+
+/* process completion of an indexed ("direct lookup") command */
+static inline u32 process_indexed_cmd(ctlr_info_t *h, u32 raw_tag)
+{
+ u32 tag_index;
CommandList_struct *c;
+
+ tag_index = cciss_tag_to_index(raw_tag);
+ if (bad_tag(h, tag_index, raw_tag))
+ return next_command(h);
+ c = h->cmd_pool + tag_index;
+ finish_cmd(h, c, raw_tag);
+ return next_command(h);
+}
+
+/* process completion of a non-indexed command */
+static inline u32 process_nonindexed_cmd(ctlr_info_t *h, u32 raw_tag)
+{
+ u32 tag;
+ CommandList_struct *c = NULL;
+ struct hlist_node *tmp;
+ __u32 busaddr_masked, tag_masked;
+
+ tag = cciss_tag_discard_error_bits(raw_tag);
+ hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
+ busaddr_masked = cciss_tag_discard_error_bits(c->busaddr);
+ tag_masked = cciss_tag_discard_error_bits(tag);
+ if (busaddr_masked == tag_masked) {
+ finish_cmd(h, c, raw_tag);
+ return next_command(h);
+ }
+ }
+ bad_tag(h, h->nr_cmds + 1, raw_tag);
+ return next_command(h);
+}
+
+static irqreturn_t do_cciss_intx(int irq, void *dev_id)
+{
+ ctlr_info_t *h = dev_id;
unsigned long flags;
- __u32 a, a1, a2;
+ u32 raw_tag;
if (interrupt_not_for_us(h))
return IRQ_NONE;
- /*
- * If there are completed commands in the completion queue,
- * we had better do something about it.
- */
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
while (interrupt_pending(h)) {
- while ((a = get_next_completion(h)) != FIFO_EMPTY) {
- a1 = a;
- if ((a & 0x04)) {
- a2 = (a >> 3);
- if (a2 >= h->nr_cmds) {
- printk(KERN_WARNING
- "cciss: controller cciss%d failed, stopping.\n",
- h->ctlr);
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- fail_all_cmds(h->ctlr);
- return IRQ_HANDLED;
- }
-
- c = h->cmd_pool + a2;
- a = c->busaddr;
-
- } else {
- struct hlist_node *tmp;
-
- a &= ~3;
- c = NULL;
- hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
- if (c->busaddr == a)
- break;
- }
- }
- /*
- * If we've found the command, take it off the
- * completion Q and free it
- */
- if (c && c->busaddr == a) {
- removeQ(c);
- if (c->cmd_type == CMD_RWREQ) {
- complete_command(h, c, 0);
- } else if (c->cmd_type == CMD_IOCTL_PEND) {
- complete(c->waiting);
- }
-# ifdef CONFIG_CISS_SCSI_TAPE
- else if (c->cmd_type == CMD_SCSI)
- complete_scsi_command(c, 0, a1);
-# endif
- continue;
- }
+ raw_tag = get_next_completion(h);
+ while (raw_tag != FIFO_EMPTY) {
+ if (cciss_tag_contains_index(raw_tag))
+ raw_tag = process_indexed_cmd(h, raw_tag);
+ else
+ raw_tag = process_nonindexed_cmd(h, raw_tag);
}
}
+ spin_unlock_irqrestore(&h->lock, flags);
+ return IRQ_HANDLED;
+}
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+/* Add a second interrupt handler for MSI/MSI-X mode. In this mode we never
+ * check the interrupt pending register because it is not set.
+ */
+static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id)
+{
+ ctlr_info_t *h = dev_id;
+ unsigned long flags;
+ u32 raw_tag;
+
+ spin_lock_irqsave(&h->lock, flags);
+ raw_tag = get_next_completion(h);
+ while (raw_tag != FIFO_EMPTY) {
+ if (cciss_tag_contains_index(raw_tag))
+ raw_tag = process_indexed_cmd(h, raw_tag);
+ else
+ raw_tag = process_nonindexed_cmd(h, raw_tag);
+ }
+ spin_unlock_irqrestore(&h->lock, flags);
return IRQ_HANDLED;
}
switch (c->err_info->SenseInfo[12]) {
case STATE_CHANGED:
- printk(KERN_WARNING "cciss%d: a state change "
- "detected, command retried\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "a state change "
+ "detected, command retried\n");
return 1;
break;
case LUN_FAILED:
- printk(KERN_WARNING "cciss%d: LUN failure "
- "detected, action required\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "LUN failure "
+ "detected, action required\n");
return 1;
break;
case REPORT_LUNS_CHANGED:
- printk(KERN_WARNING "cciss%d: report LUN data "
- "changed\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "report LUN data changed\n");
/*
* Here, we could call add_to_scan_list and wake up the scan thread,
* except that it's quite likely that we will get more than one
return 1;
break;
case POWER_OR_RESET:
- printk(KERN_WARNING "cciss%d: a power on "
- "or device reset detected\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "a power on or device reset detected\n");
return 1;
break;
case UNIT_ATTENTION_CLEARED:
- printk(KERN_WARNING "cciss%d: unit attention "
- "cleared by another initiator\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "unit attention cleared by another initiator\n");
return 1;
break;
default:
- printk(KERN_WARNING "cciss%d: unknown "
- "unit attention detected\n", h->ctlr);
- return 1;
+ dev_warn(&h->pdev->dev, "unknown unit attention detected\n");
+ return 1;
}
}
* the io functions.
* This is for debug only.
*/
-#ifdef CCISS_DEBUG
-static void print_cfg_table(CfgTable_struct *tb)
+static void print_cfg_table(ctlr_info_t *h)
{
int i;
char temp_name[17];
+ CfgTable_struct *tb = h->cfgtable;
- printk("Controller Configuration information\n");
- printk("------------------------------------\n");
+ dev_dbg(&h->pdev->dev, "Controller Configuration information\n");
+ dev_dbg(&h->pdev->dev, "------------------------------------\n");
for (i = 0; i < 4; i++)
temp_name[i] = readb(&(tb->Signature[i]));
temp_name[4] = '\0';
- printk(" Signature = %s\n", temp_name);
- printk(" Spec Number = %d\n", readl(&(tb->SpecValence)));
- printk(" Transport methods supported = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Signature = %s\n", temp_name);
+ dev_dbg(&h->pdev->dev, " Spec Number = %d\n",
+ readl(&(tb->SpecValence)));
+ dev_dbg(&h->pdev->dev, " Transport methods supported = 0x%x\n",
readl(&(tb->TransportSupport)));
- printk(" Transport methods active = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Transport methods active = 0x%x\n",
readl(&(tb->TransportActive)));
- printk(" Requested transport Method = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Requested transport Method = 0x%x\n",
readl(&(tb->HostWrite.TransportRequest)));
- printk(" Coalesce Interrupt Delay = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Coalesce Interrupt Delay = 0x%x\n",
readl(&(tb->HostWrite.CoalIntDelay)));
- printk(" Coalesce Interrupt Count = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Coalesce Interrupt Count = 0x%x\n",
readl(&(tb->HostWrite.CoalIntCount)));
- printk(" Max outstanding commands = 0x%d\n",
+ dev_dbg(&h->pdev->dev, " Max outstanding commands = 0x%d\n",
readl(&(tb->CmdsOutMax)));
- printk(" Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
+ dev_dbg(&h->pdev->dev, " Bus Types = 0x%x\n",
+ readl(&(tb->BusTypes)));
for (i = 0; i < 16; i++)
temp_name[i] = readb(&(tb->ServerName[i]));
temp_name[16] = '\0';
- printk(" Server Name = %s\n", temp_name);
- printk(" Heartbeat Counter = 0x%x\n\n\n", readl(&(tb->HeartBeat)));
+ dev_dbg(&h->pdev->dev, " Server Name = %s\n", temp_name);
+ dev_dbg(&h->pdev->dev, " Heartbeat Counter = 0x%x\n\n\n",
+ readl(&(tb->HeartBeat)));
}
-#endif /* CCISS_DEBUG */
static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
{
offset += 8;
break;
default: /* reserved in PCI 2.2 */
- printk(KERN_WARNING
+ dev_warn(&pdev->dev,
"Base address is invalid\n");
return -1;
break;
return -1;
}
+/* Fill in bucket_map[], given nsgs (the max number of
+ * scatter gather elements supported) and bucket[],
+ * which is an array of 8 integers. The bucket[] array
+ * contains 8 different DMA transfer sizes (in 16
+ * byte increments) which the controller uses to fetch
+ * commands. This function fills in bucket_map[], which
+ * maps a given number of scatter gather elements to one of
+ * the 8 DMA transfer sizes. The point of it is to allow the
+ * controller to only do as much DMA as needed to fetch the
+ * command, with the DMA transfer size encoded in the lower
+ * bits of the command address.
+ */
+static void calc_bucket_map(int bucket[], int num_buckets,
+ int nsgs, int *bucket_map)
+{
+ int i, j, b, size;
+
+ /* even a command with 0 SGs requires 4 blocks */
+#define MINIMUM_TRANSFER_BLOCKS 4
+#define NUM_BUCKETS 8
+ /* Note, bucket_map must have nsgs+1 entries. */
+ for (i = 0; i <= nsgs; i++) {
+ /* Compute size of a command with i SG entries */
+ size = i + MINIMUM_TRANSFER_BLOCKS;
+ b = num_buckets; /* Assume the biggest bucket */
+ /* Find the bucket that is just big enough */
+ for (j = 0; j < 8; j++) {
+ if (bucket[j] >= size) {
+ b = j;
+ break;
+ }
+ }
+ /* for a command with i SG entries, use bucket b. */
+ bucket_map[i] = b;
+ }
+}
+
+static void __devinit cciss_wait_for_mode_change_ack(ctlr_info_t *h)
+{
+ int i;
+
+ /* under certain very rare conditions, this can take awhile.
+ * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
+ * as we enter this code.) */
+ for (i = 0; i < MAX_CONFIG_WAIT; i++) {
+ if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
+ break;
+ msleep(10);
+ }
+}
+
+static __devinit void cciss_enter_performant_mode(ctlr_info_t *h)
+{
+ /* This is a bit complicated. There are 8 registers on
+ * the controller which we write to to tell it 8 different
+ * sizes of commands which there may be. It's a way of
+ * reducing the DMA done to fetch each command. Encoded into
+ * each command's tag are 3 bits which communicate to the controller
+ * which of the eight sizes that command fits within. The size of
+ * each command depends on how many scatter gather entries there are.
+ * Each SG entry requires 16 bytes. The eight registers are programmed
+ * with the number of 16-byte blocks a command of that size requires.
+ * The smallest command possible requires 5 such 16 byte blocks.
+ * the largest command possible requires MAXSGENTRIES + 4 16-byte
+ * blocks. Note, this only extends to the SG entries contained
+ * within the command block, and does not extend to chained blocks
+ * of SG elements. bft[] contains the eight values we write to
+ * the registers. They are not evenly distributed, but have more
+ * sizes for small commands, and fewer sizes for larger commands.
+ */
+ __u32 trans_offset;
+ int bft[8] = { 5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4};
+ /*
+ * 5 = 1 s/g entry or 4k
+ * 6 = 2 s/g entry or 8k
+ * 8 = 4 s/g entry or 16k
+ * 10 = 6 s/g entry or 24k
+ */
+ unsigned long register_value;
+ BUILD_BUG_ON(28 > MAXSGENTRIES + 4);
+
+ h->reply_pool_wraparound = 1; /* spec: init to 1 */
+
+ /* Controller spec: zero out this buffer. */
+ memset(h->reply_pool, 0, h->max_commands * sizeof(__u64));
+ h->reply_pool_head = h->reply_pool;
+
+ trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ calc_bucket_map(bft, ARRAY_SIZE(bft), h->maxsgentries,
+ h->blockFetchTable);
+ writel(bft[0], &h->transtable->BlockFetch0);
+ writel(bft[1], &h->transtable->BlockFetch1);
+ writel(bft[2], &h->transtable->BlockFetch2);
+ writel(bft[3], &h->transtable->BlockFetch3);
+ writel(bft[4], &h->transtable->BlockFetch4);
+ writel(bft[5], &h->transtable->BlockFetch5);
+ writel(bft[6], &h->transtable->BlockFetch6);
+ writel(bft[7], &h->transtable->BlockFetch7);
+
+ /* size of controller ring buffer */
+ writel(h->max_commands, &h->transtable->RepQSize);
+ writel(1, &h->transtable->RepQCount);
+ writel(0, &h->transtable->RepQCtrAddrLow32);
+ writel(0, &h->transtable->RepQCtrAddrHigh32);
+ writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32);
+ writel(0, &h->transtable->RepQAddr0High32);
+ writel(CFGTBL_Trans_Performant,
+ &(h->cfgtable->HostWrite.TransportRequest));
+
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
+ cciss_wait_for_mode_change_ack(h);
+ register_value = readl(&(h->cfgtable->TransportActive));
+ if (!(register_value & CFGTBL_Trans_Performant))
+ dev_warn(&h->pdev->dev, "cciss: unable to get board into"
+ " performant mode\n");
+}
+
+static void __devinit cciss_put_controller_into_performant_mode(ctlr_info_t *h)
+{
+ __u32 trans_support;
+
+ dev_dbg(&h->pdev->dev, "Trying to put board into Performant mode\n");
+ /* Attempt to put controller into performant mode if supported */
+ /* Does board support performant mode? */
+ trans_support = readl(&(h->cfgtable->TransportSupport));
+ if (!(trans_support & PERFORMANT_MODE))
+ return;
+
+ dev_dbg(&h->pdev->dev, "Placing controller into performant mode\n");
+ /* Performant mode demands commands on a 32 byte boundary
+ * pci_alloc_consistent aligns on page boundarys already.
+ * Just need to check if divisible by 32
+ */
+ if ((sizeof(CommandList_struct) % 32) != 0) {
+ dev_warn(&h->pdev->dev, "%s %d %s\n",
+ "cciss info: command size[",
+ (int)sizeof(CommandList_struct),
+ "] not divisible by 32, no performant mode..\n");
+ return;
+ }
+
+ /* Performant mode ring buffer and supporting data structures */
+ h->reply_pool = (__u64 *)pci_alloc_consistent(
+ h->pdev, h->max_commands * sizeof(__u64),
+ &(h->reply_pool_dhandle));
+
+ /* Need a block fetch table for performant mode */
+ h->blockFetchTable = kmalloc(((h->maxsgentries+1) *
+ sizeof(__u32)), GFP_KERNEL);
+
+ if ((h->reply_pool == NULL) || (h->blockFetchTable == NULL))
+ goto clean_up;
+
+ cciss_enter_performant_mode(h);
+
+ /* Change the access methods to the performant access methods */
+ h->access = SA5_performant_access;
+ h->transMethod = CFGTBL_Trans_Performant;
+
+ return;
+clean_up:
+ kfree(h->blockFetchTable);
+ if (h->reply_pool)
+ pci_free_consistent(h->pdev,
+ h->max_commands * sizeof(__u64),
+ h->reply_pool,
+ h->reply_pool_dhandle);
+ return;
+
+} /* cciss_put_controller_into_performant_mode */
+
/* If MSI/MSI-X is supported by the kernel we will try to enable it on
* controllers that are capable. If not, we use IO-APIC mode.
*/
-static void __devinit cciss_interrupt_mode(ctlr_info_t *c,
- struct pci_dev *pdev, __u32 board_id)
+static void __devinit cciss_interrupt_mode(ctlr_info_t *h)
{
#ifdef CONFIG_PCI_MSI
int err;
};
/* Some boards advertise MSI but don't really support it */
- if ((board_id == 0x40700E11) ||
- (board_id == 0x40800E11) ||
- (board_id == 0x40820E11) || (board_id == 0x40830E11))
+ if ((h->board_id == 0x40700E11) || (h->board_id == 0x40800E11) ||
+ (h->board_id == 0x40820E11) || (h->board_id == 0x40830E11))
goto default_int_mode;
- if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
- err = pci_enable_msix(pdev, cciss_msix_entries, 4);
+ if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) {
+ err = pci_enable_msix(h->pdev, cciss_msix_entries, 4);
if (!err) {
- c->intr[0] = cciss_msix_entries[0].vector;
- c->intr[1] = cciss_msix_entries[1].vector;
- c->intr[2] = cciss_msix_entries[2].vector;
- c->intr[3] = cciss_msix_entries[3].vector;
- c->msix_vector = 1;
+ h->intr[0] = cciss_msix_entries[0].vector;
+ h->intr[1] = cciss_msix_entries[1].vector;
+ h->intr[2] = cciss_msix_entries[2].vector;
+ h->intr[3] = cciss_msix_entries[3].vector;
+ h->msix_vector = 1;
return;
}
if (err > 0) {
- printk(KERN_WARNING "cciss: only %d MSI-X vectors "
- "available\n", err);
+ dev_warn(&h->pdev->dev,
+ "only %d MSI-X vectors available\n", err);
goto default_int_mode;
} else {
- printk(KERN_WARNING "cciss: MSI-X init failed %d\n",
- err);
+ dev_warn(&h->pdev->dev,
+ "MSI-X init failed %d\n", err);
goto default_int_mode;
}
}
- if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
- if (!pci_enable_msi(pdev)) {
- c->msi_vector = 1;
- } else {
- printk(KERN_WARNING "cciss: MSI init failed\n");
- }
+ if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
+ if (!pci_enable_msi(h->pdev))
+ h->msi_vector = 1;
+ else
+ dev_warn(&h->pdev->dev, "MSI init failed\n");
}
default_int_mode:
#endif /* CONFIG_PCI_MSI */
/* if we get here we're going to use the default interrupt mode */
- c->intr[SIMPLE_MODE_INT] = pdev->irq;
+ h->intr[PERF_MODE_INT] = h->pdev->irq;
return;
}
-static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
+static int __devinit cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
{
- ushort subsystem_vendor_id, subsystem_device_id, command;
- __u32 board_id, scratchpad = 0;
- __u64 cfg_offset;
- __u32 cfg_base_addr;
- __u64 cfg_base_addr_index;
- int i, prod_index, err;
+ int i;
+ u32 subsystem_vendor_id, subsystem_device_id;
subsystem_vendor_id = pdev->subsystem_vendor;
subsystem_device_id = pdev->subsystem_device;
- board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
- subsystem_vendor_id);
+ *board_id = ((subsystem_device_id << 16) & 0xffff0000) |
+ subsystem_vendor_id;
for (i = 0; i < ARRAY_SIZE(products); i++) {
/* Stand aside for hpsa driver on request */
if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY)
return -ENODEV;
- if (board_id == products[i].board_id)
- break;
- }
- prod_index = i;
- if (prod_index == ARRAY_SIZE(products)) {
- dev_warn(&pdev->dev,
- "unrecognized board ID: 0x%08lx, ignoring.\n",
- (unsigned long) board_id);
- return -ENODEV;
+ if (*board_id == products[i].board_id)
+ return i;
}
+ dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n",
+ *board_id);
+ return -ENODEV;
+}
- /* check to see if controller has been disabled */
- /* BEFORE trying to enable it */
- (void)pci_read_config_word(pdev, PCI_COMMAND, &command);
- if (!(command & 0x02)) {
- printk(KERN_WARNING
- "cciss: controller appears to be disabled\n");
- return -ENODEV;
- }
+static inline bool cciss_board_disabled(ctlr_info_t *h)
+{
+ u16 command;
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR "cciss: Unable to Enable PCI device\n");
- return err;
- }
+ (void) pci_read_config_word(h->pdev, PCI_COMMAND, &command);
+ return ((command & PCI_COMMAND_MEMORY) == 0);
+}
- err = pci_request_regions(pdev, "cciss");
- if (err) {
- printk(KERN_ERR "cciss: Cannot obtain PCI resources, "
- "aborting\n");
- return err;
- }
+static int __devinit cciss_pci_find_memory_BAR(struct pci_dev *pdev,
+ unsigned long *memory_bar)
+{
+ int i;
-#ifdef CCISS_DEBUG
- printk("command = %x\n", command);
- printk("irq = %x\n", pdev->irq);
- printk("board_id = %x\n", board_id);
-#endif /* CCISS_DEBUG */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
+ if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
+ /* addressing mode bits already removed */
+ *memory_bar = pci_resource_start(pdev, i);
+ dev_dbg(&pdev->dev, "memory BAR = %lx\n",
+ *memory_bar);
+ return 0;
+ }
+ dev_warn(&pdev->dev, "no memory BAR found\n");
+ return -ENODEV;
+}
-/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
- * else we use the IO-APIC interrupt assigned to us by system ROM.
- */
- cciss_interrupt_mode(c, pdev, board_id);
+static int __devinit cciss_wait_for_board_ready(ctlr_info_t *h)
+{
+ int i;
+ u32 scratchpad;
- /* find the memory BAR */
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- if (pci_resource_flags(pdev, i) & IORESOURCE_MEM)
- break;
- }
- if (i == DEVICE_COUNT_RESOURCE) {
- printk(KERN_WARNING "cciss: No memory BAR found\n");
- err = -ENODEV;
- goto err_out_free_res;
+ for (i = 0; i < CCISS_BOARD_READY_ITERATIONS; i++) {
+ scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
+ if (scratchpad == CCISS_FIRMWARE_READY)
+ return 0;
+ msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS);
}
+ dev_warn(&h->pdev->dev, "board not ready, timed out.\n");
+ return -ENODEV;
+}
- c->paddr = pci_resource_start(pdev, i); /* addressing mode bits
- * already removed
- */
+static int __devinit cciss_find_cfg_addrs(struct pci_dev *pdev,
+ void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index,
+ u64 *cfg_offset)
+{
+ *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET);
+ *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET);
+ *cfg_base_addr &= (u32) 0x0000ffff;
+ *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr);
+ if (*cfg_base_addr_index == -1) {
+ dev_warn(&pdev->dev, "cannot find cfg_base_addr_index, "
+ "*cfg_base_addr = 0x%08x\n", *cfg_base_addr);
+ return -ENODEV;
+ }
+ return 0;
+}
-#ifdef CCISS_DEBUG
- printk("address 0 = %lx\n", c->paddr);
-#endif /* CCISS_DEBUG */
- c->vaddr = remap_pci_mem(c->paddr, 0x250);
+static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
+{
+ u64 cfg_offset;
+ u32 cfg_base_addr;
+ u64 cfg_base_addr_index;
+ u32 trans_offset;
+ int rc;
- /* Wait for the board to become ready. (PCI hotplug needs this.)
- * We poll for up to 120 secs, once per 100ms. */
- for (i = 0; i < 1200; i++) {
- scratchpad = readl(c->vaddr + SA5_SCRATCHPAD_OFFSET);
- if (scratchpad == CCISS_FIRMWARE_READY)
- break;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(msecs_to_jiffies(100)); /* wait 100ms */
- }
- if (scratchpad != CCISS_FIRMWARE_READY) {
- printk(KERN_WARNING "cciss: Board not ready. Timed out.\n");
- err = -ENODEV;
- goto err_out_free_res;
- }
+ rc = cciss_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
+ &cfg_base_addr_index, &cfg_offset);
+ if (rc)
+ return rc;
+ h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
+ cfg_base_addr_index) + cfg_offset, sizeof(h->cfgtable));
+ if (!h->cfgtable)
+ return -ENOMEM;
+ /* Find performant mode table. */
+ trans_offset = readl(&h->cfgtable->TransMethodOffset);
+ h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
+ cfg_base_addr_index)+cfg_offset+trans_offset,
+ sizeof(*h->transtable));
+ if (!h->transtable)
+ return -ENOMEM;
+ return 0;
+}
- /* get the address index number */
- cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET);
- cfg_base_addr &= (__u32) 0x0000ffff;
-#ifdef CCISS_DEBUG
- printk("cfg base address = %x\n", cfg_base_addr);
-#endif /* CCISS_DEBUG */
- cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
-#ifdef CCISS_DEBUG
- printk("cfg base address index = %llx\n",
- (unsigned long long)cfg_base_addr_index);
-#endif /* CCISS_DEBUG */
- if (cfg_base_addr_index == -1) {
- printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
- err = -ENODEV;
- goto err_out_free_res;
+static void __devinit cciss_get_max_perf_mode_cmds(struct ctlr_info *h)
+{
+ h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+ if (h->max_commands < 16) {
+ dev_warn(&h->pdev->dev, "Controller reports "
+ "max supported commands of %d, an obvious lie. "
+ "Using 16. Ensure that firmware is up to date.\n",
+ h->max_commands);
+ h->max_commands = 16;
}
+}
- cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
-#ifdef CCISS_DEBUG
- printk("cfg offset = %llx\n", (unsigned long long)cfg_offset);
-#endif /* CCISS_DEBUG */
- c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
- cfg_base_addr_index) +
- cfg_offset, sizeof(CfgTable_struct));
- c->board_id = board_id;
-
-#ifdef CCISS_DEBUG
- print_cfg_table(c->cfgtable);
-#endif /* CCISS_DEBUG */
-
- /* Some controllers support Zero Memory Raid (ZMR).
- * When configured in ZMR mode the number of supported
- * commands drops to 64. So instead of just setting an
- * arbitrary value we make the driver a little smarter.
- * We read the config table to tell us how many commands
- * are supported on the controller then subtract 4 to
- * leave a little room for ioctl calls.
- */
- c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
- c->maxsgentries = readl(&(c->cfgtable->MaxSGElements));
-
+/* Interrogate the hardware for some limits:
+ * max commands, max SG elements without chaining, and with chaining,
+ * SG chain block size, etc.
+ */
+static void __devinit cciss_find_board_params(ctlr_info_t *h)
+{
+ cciss_get_max_perf_mode_cmds(h);
+ h->nr_cmds = h->max_commands - 4; /* Allow room for some ioctls */
+ h->maxsgentries = readl(&(h->cfgtable->MaxSGElements));
/*
- * Limit native command to 32 s/g elements to save dma'able memory.
+ * Limit in-command s/g elements to 32 save dma'able memory.
* Howvever spec says if 0, use 31
*/
-
- c->max_cmd_sgentries = 31;
- if (c->maxsgentries > 512) {
- c->max_cmd_sgentries = 32;
- c->chainsize = c->maxsgentries - c->max_cmd_sgentries + 1;
- c->maxsgentries -= 1; /* account for chain pointer */
+ h->max_cmd_sgentries = 31;
+ if (h->maxsgentries > 512) {
+ h->max_cmd_sgentries = 32;
+ h->chainsize = h->maxsgentries - h->max_cmd_sgentries + 1;
+ h->maxsgentries--; /* save one for chain pointer */
} else {
- c->maxsgentries = 31; /* Default to traditional value */
- c->chainsize = 0; /* traditional */
+ h->maxsgentries = 31; /* default to traditional values */
+ h->chainsize = 0;
}
+}
- c->product_name = products[prod_index].product_name;
- c->access = *(products[prod_index].access);
- c->nr_cmds = c->max_commands - 4;
- if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
- (readb(&c->cfgtable->Signature[1]) != 'I') ||
- (readb(&c->cfgtable->Signature[2]) != 'S') ||
- (readb(&c->cfgtable->Signature[3]) != 'S')) {
- printk("Does not appear to be a valid CISS config table\n");
- err = -ENODEV;
- goto err_out_free_res;
+static inline bool CISS_signature_present(ctlr_info_t *h)
+{
+ if ((readb(&h->cfgtable->Signature[0]) != 'C') ||
+ (readb(&h->cfgtable->Signature[1]) != 'I') ||
+ (readb(&h->cfgtable->Signature[2]) != 'S') ||
+ (readb(&h->cfgtable->Signature[3]) != 'S')) {
+ dev_warn(&h->pdev->dev, "not a valid CISS config table\n");
+ return false;
}
+ return true;
+}
+
+/* Need to enable prefetch in the SCSI core for 6400 in x86 */
+static inline void cciss_enable_scsi_prefetch(ctlr_info_t *h)
+{
#ifdef CONFIG_X86
- {
- /* Need to enable prefetch in the SCSI core for 6400 in x86 */
- __u32 prefetch;
- prefetch = readl(&(c->cfgtable->SCSI_Prefetch));
- prefetch |= 0x100;
- writel(prefetch, &(c->cfgtable->SCSI_Prefetch));
- }
+ u32 prefetch;
+
+ prefetch = readl(&(h->cfgtable->SCSI_Prefetch));
+ prefetch |= 0x100;
+ writel(prefetch, &(h->cfgtable->SCSI_Prefetch));
#endif
+}
- /* Disabling DMA prefetch and refetch for the P600.
- * An ASIC bug may result in accesses to invalid memory addresses.
- * We've disabled prefetch for some time now. Testing with XEN
- * kernels revealed a bug in the refetch if dom0 resides on a P600.
- */
- if(board_id == 0x3225103C) {
- __u32 dma_prefetch;
- __u32 dma_refetch;
- dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
- dma_prefetch |= 0x8000;
- writel(dma_prefetch, c->vaddr + I2O_DMA1_CFG);
- pci_read_config_dword(pdev, PCI_COMMAND_PARITY, &dma_refetch);
- dma_refetch |= 0x1;
- pci_write_config_dword(pdev, PCI_COMMAND_PARITY, dma_refetch);
+/* Disable DMA prefetch for the P600. Otherwise an ASIC bug may result
+ * in a prefetch beyond physical memory.
+ */
+static inline void cciss_p600_dma_prefetch_quirk(ctlr_info_t *h)
+{
+ u32 dma_prefetch;
+ __u32 dma_refetch;
+
+ if (h->board_id != 0x3225103C)
+ return;
+ dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG);
+ dma_prefetch |= 0x8000;
+ writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
+ pci_read_config_dword(h->pdev, PCI_COMMAND_PARITY, &dma_refetch);
+ dma_refetch |= 0x1;
+ pci_write_config_dword(h->pdev, PCI_COMMAND_PARITY, dma_refetch);
+}
+
+static int __devinit cciss_pci_init(ctlr_info_t *h)
+{
+ int prod_index, err;
+
+ prod_index = cciss_lookup_board_id(h->pdev, &h->board_id);
+ if (prod_index < 0)
+ return -ENODEV;
+ h->product_name = products[prod_index].product_name;
+ h->access = *(products[prod_index].access);
+
+ if (cciss_board_disabled(h)) {
+ dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
+ return -ENODEV;
+ }
+ err = pci_enable_device(h->pdev);
+ if (err) {
+ dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n");
+ return err;
}
-#ifdef CCISS_DEBUG
- printk("Trying to put board into Simple mode\n");
-#endif /* CCISS_DEBUG */
- c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
- /* Update the field, and then ring the doorbell */
- writel(CFGTBL_Trans_Simple, &(c->cfgtable->HostWrite.TransportRequest));
- writel(CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL);
+ err = pci_request_regions(h->pdev, "cciss");
+ if (err) {
+ dev_warn(&h->pdev->dev,
+ "Cannot obtain PCI resources, aborting\n");
+ return err;
+ }
- /* under certain very rare conditions, this can take awhile.
- * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
- * as we enter this code.) */
- for (i = 0; i < MAX_CONFIG_WAIT; i++) {
- if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
- break;
- /* delay and try again */
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(msecs_to_jiffies(1));
+ dev_dbg(&h->pdev->dev, "irq = %x\n", h->pdev->irq);
+ dev_dbg(&h->pdev->dev, "board_id = %x\n", h->board_id);
+
+/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
+ * else we use the IO-APIC interrupt assigned to us by system ROM.
+ */
+ cciss_interrupt_mode(h);
+ err = cciss_pci_find_memory_BAR(h->pdev, &h->paddr);
+ if (err)
+ goto err_out_free_res;
+ h->vaddr = remap_pci_mem(h->paddr, 0x250);
+ if (!h->vaddr) {
+ err = -ENOMEM;
+ goto err_out_free_res;
}
+ err = cciss_wait_for_board_ready(h);
+ if (err)
+ goto err_out_free_res;
+ err = cciss_find_cfgtables(h);
+ if (err)
+ goto err_out_free_res;
+ print_cfg_table(h);
+ cciss_find_board_params(h);
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "I counter got to %d %x\n", i,
- readl(c->vaddr + SA5_DOORBELL));
-#endif /* CCISS_DEBUG */
-#ifdef CCISS_DEBUG
- print_cfg_table(c->cfgtable);
-#endif /* CCISS_DEBUG */
-
- if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
- printk(KERN_WARNING "cciss: unable to get board into"
- " simple mode\n");
+ if (!CISS_signature_present(h)) {
err = -ENODEV;
goto err_out_free_res;
}
+ cciss_enable_scsi_prefetch(h);
+ cciss_p600_dma_prefetch_quirk(h);
+ cciss_put_controller_into_performant_mode(h);
return 0;
err_out_free_res:
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
- pci_release_regions(pdev);
+ if (h->transtable)
+ iounmap(h->transtable);
+ if (h->cfgtable)
+ iounmap(h->cfgtable);
+ if (h->vaddr)
+ iounmap(h->vaddr);
+ pci_release_regions(h->pdev);
return err;
}
/* Function to find the first free pointer into our hba[] array
* Returns -1 if no free entries are left.
*/
-static int alloc_cciss_hba(void)
+static int alloc_cciss_hba(struct pci_dev *pdev)
{
int i;
for (i = 0; i < MAX_CTLR; i++) {
if (!hba[i]) {
- ctlr_info_t *p;
+ ctlr_info_t *h;
- p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
- if (!p)
+ h = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
+ if (!h)
goto Enomem;
- hba[i] = p;
+ hba[i] = h;
return i;
}
}
- printk(KERN_WARNING "cciss: This driver supports a maximum"
+ dev_warn(&pdev->dev, "This driver supports a maximum"
" of %d controllers.\n", MAX_CTLR);
return -1;
Enomem:
- printk(KERN_ERR "cciss: out of memory.\n");
+ dev_warn(&pdev->dev, "out of memory.\n");
return -1;
}
-static void free_hba(int n)
+static void free_hba(ctlr_info_t *h)
{
- ctlr_info_t *h = hba[n];
int i;
- hba[n] = NULL;
+ hba[h->ctlr] = NULL;
for (i = 0; i < h->highest_lun + 1; i++)
if (h->gendisk[i] != NULL)
put_disk(h->gendisk[i]);
/* we leak the DMA buffer here ... no choice since the controller could
still complete the command. */
if (i == 10) {
- printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n",
+ dev_err(&pdev->dev,
+ "controller message %02x:%02x timed out\n",
opcode, type);
return -ETIMEDOUT;
}
pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
if (tag & 2) {
- printk(KERN_ERR "cciss: controller message %02x:%02x failed\n",
+ dev_err(&pdev->dev, "controller message %02x:%02x failed\n",
opcode, type);
return -EIO;
}
- printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n",
+ dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n",
opcode, type);
return 0;
}
if (pos) {
pci_read_config_word(pdev, msi_control_reg(pos), &control);
if (control & PCI_MSI_FLAGS_ENABLE) {
- printk(KERN_INFO "cciss: resetting MSI\n");
+ dev_info(&pdev->dev, "resetting MSI\n");
pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
}
}
if (pos) {
pci_read_config_word(pdev, msi_control_reg(pos), &control);
if (control & PCI_MSIX_FLAGS_ENABLE) {
- printk(KERN_INFO "cciss: resetting MSI-X\n");
+ dev_info(&pdev->dev, "resetting MSI-X\n");
pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
}
}
return 0;
}
-/* This does a hard reset of the controller using PCI power management
- * states. */
-static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
+static int cciss_controller_hard_reset(struct pci_dev *pdev,
+ void * __iomem vaddr, bool use_doorbell)
{
- u16 pmcsr, saved_config_space[32];
- int i, pos;
+ u16 pmcsr;
+ int pos;
- printk(KERN_INFO "cciss: using PCI PM to reset controller\n");
+ if (use_doorbell) {
+ /* For everything after the P600, the PCI power state method
+ * of resetting the controller doesn't work, so we have this
+ * other way using the doorbell register.
+ */
+ dev_info(&pdev->dev, "using doorbell to reset controller\n");
+ writel(DOORBELL_CTLR_RESET, vaddr + SA5_DOORBELL);
+ msleep(1000);
+ } else { /* Try to do it the PCI power state way */
+
+ /* Quoting from the Open CISS Specification: "The Power
+ * Management Control/Status Register (CSR) controls the power
+ * state of the device. The normal operating state is D0,
+ * CSR=00h. The software off state is D3, CSR=03h. To reset
+ * the controller, place the interface device in D3 then to D0,
+ * this causes a secondary PCI reset which will reset the
+ * controller." */
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pos == 0) {
+ dev_err(&pdev->dev,
+ "cciss_controller_hard_reset: "
+ "PCI PM not supported\n");
+ return -ENODEV;
+ }
+ dev_info(&pdev->dev, "using PCI PM to reset controller\n");
+ /* enter the D3hot power management state */
+ pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D3hot;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
- /* This is very nearly the same thing as
+ msleep(500);
- pci_save_state(pci_dev);
- pci_set_power_state(pci_dev, PCI_D3hot);
- pci_set_power_state(pci_dev, PCI_D0);
- pci_restore_state(pci_dev);
+ /* enter the D0 power management state */
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D0;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
- but we can't use these nice canned kernel routines on
- kexec, because they also check the MSI/MSI-X state in PCI
- configuration space and do the wrong thing when it is
- set/cleared. Also, the pci_save/restore_state functions
- violate the ordering requirements for restoring the
- configuration space from the CCISS document (see the
- comment below). So we roll our own .... */
+ msleep(500);
+ }
+ return 0;
+}
- for (i = 0; i < 32; i++)
- pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+/* This does a hard reset of the controller using PCI power management
+ * states or using the doorbell register. */
+static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
+{
+ u16 saved_config_space[32];
+ u64 cfg_offset;
+ u32 cfg_base_addr;
+ u64 cfg_base_addr_index;
+ void __iomem *vaddr;
+ unsigned long paddr;
+ u32 misc_fw_support, active_transport;
+ int rc, i;
+ CfgTable_struct __iomem *cfgtable;
+ bool use_doorbell;
+ u32 board_id;
+
+ /* For controllers as old a the p600, this is very nearly
+ * the same thing as
+ *
+ * pci_save_state(pci_dev);
+ * pci_set_power_state(pci_dev, PCI_D3hot);
+ * pci_set_power_state(pci_dev, PCI_D0);
+ * pci_restore_state(pci_dev);
+ *
+ * but we can't use these nice canned kernel routines on
+ * kexec, because they also check the MSI/MSI-X state in PCI
+ * configuration space and do the wrong thing when it is
+ * set/cleared. Also, the pci_save/restore_state functions
+ * violate the ordering requirements for restoring the
+ * configuration space from the CCISS document (see the
+ * comment below). So we roll our own ....
+ *
+ * For controllers newer than the P600, the pci power state
+ * method of resetting doesn't work so we have another way
+ * using the doorbell register.
+ */
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
- printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n");
+ /* Exclude 640x boards. These are two pci devices in one slot
+ * which share a battery backed cache module. One controls the
+ * cache, the other accesses the cache through the one that controls
+ * it. If we reset the one controlling the cache, the other will
+ * likely not be happy. Just forbid resetting this conjoined mess.
+ */
+ cciss_lookup_board_id(pdev, &board_id);
+ if (board_id == 0x409C0E11 || board_id == 0x409D0E11) {
+ dev_warn(&pdev->dev, "Cannot reset Smart Array 640x "
+ "due to shared cache module.");
return -ENODEV;
}
- /* Quoting from the Open CISS Specification: "The Power
- * Management Control/Status Register (CSR) controls the power
- * state of the device. The normal operating state is D0,
- * CSR=00h. The software off state is D3, CSR=03h. To reset
- * the controller, place the interface device in D3 then to
- * D0, this causes a secondary PCI reset which will reset the
- * controller." */
+ for (i = 0; i < 32; i++)
+ pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
- /* enter the D3hot power management state */
- pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D3hot;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+ /* find the first memory BAR, so we can find the cfg table */
+ rc = cciss_pci_find_memory_BAR(pdev, &paddr);
+ if (rc)
+ return rc;
+ vaddr = remap_pci_mem(paddr, 0x250);
+ if (!vaddr)
+ return -ENOMEM;
- schedule_timeout_uninterruptible(HZ >> 1);
+ /* find cfgtable in order to check if reset via doorbell is supported */
+ rc = cciss_find_cfg_addrs(pdev, vaddr, &cfg_base_addr,
+ &cfg_base_addr_index, &cfg_offset);
+ if (rc)
+ goto unmap_vaddr;
+ cfgtable = remap_pci_mem(pci_resource_start(pdev,
+ cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable));
+ if (!cfgtable) {
+ rc = -ENOMEM;
+ goto unmap_vaddr;
+ }
- /* enter the D0 power management state */
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D0;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+ /* If reset via doorbell register is supported, use that. */
+ misc_fw_support = readl(&cfgtable->misc_fw_support);
+ use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
- schedule_timeout_uninterruptible(HZ >> 1);
+ rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell);
+ if (rc)
+ goto unmap_cfgtable;
/* Restore the PCI configuration space. The Open CISS
* Specification says, "Restore the PCI Configuration
* Registers, offsets 00h through 60h. It is important to
* restore the command register, 16-bits at offset 04h,
* last. Do not restore the configuration status register,
- * 16-bits at offset 06h." Note that the offset is 2*i. */
+ * 16-bits at offset 06h." Note that the offset is 2*i.
+ */
for (i = 0; i < 32; i++) {
if (i == 2 || i == 3)
continue;
wmb();
pci_write_config_word(pdev, 4, saved_config_space[2]);
+ /* Some devices (notably the HP Smart Array 5i Controller)
+ need a little pause here */
+ msleep(CCISS_POST_RESET_PAUSE_MSECS);
+
+ /* Controller should be in simple mode at this point. If it's not,
+ * It means we're on one of those controllers which doesn't support
+ * the doorbell reset method and on which the PCI power management reset
+ * method doesn't work (P800, for example.)
+ * In those cases, don't try to proceed, as it generally doesn't work.
+ */
+ active_transport = readl(&cfgtable->TransportActive);
+ if (active_transport & PERFORMANT_MODE) {
+ dev_warn(&pdev->dev, "Unable to successfully reset controller,"
+ " Ignoring controller.\n");
+ rc = -ENODEV;
+ }
+
+unmap_cfgtable:
+ iounmap(cfgtable);
+
+unmap_vaddr:
+ iounmap(vaddr);
+ return rc;
+}
+
+static __devinit int cciss_init_reset_devices(struct pci_dev *pdev)
+{
+ int rc, i;
+
+ if (!reset_devices)
+ return 0;
+
+ /* Reset the controller with a PCI power-cycle or via doorbell */
+ rc = cciss_kdump_hard_reset_controller(pdev);
+
+ /* -ENOTSUPP here means we cannot reset the controller
+ * but it's already (and still) up and running in
+ * "performant mode". Or, it might be 640x, which can't reset
+ * due to concerns about shared bbwc between 6402/6404 pair.
+ */
+ if (rc == -ENOTSUPP)
+ return 0; /* just try to do the kdump anyhow. */
+ if (rc)
+ return -ENODEV;
+ if (cciss_reset_msi(pdev))
+ return -ENODEV;
+
+ /* Now try to get the controller to respond to a no-op */
+ for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) {
+ if (cciss_noop(pdev) == 0)
+ break;
+ else
+ dev_warn(&pdev->dev, "no-op failed%s\n",
+ (i < CCISS_POST_RESET_NOOP_RETRIES - 1 ?
+ "; re-trying" : ""));
+ msleep(CCISS_POST_RESET_NOOP_INTERVAL_MSECS);
+ }
return 0;
}
int rc;
int dac, return_code;
InquiryData_struct *inq_buff;
+ ctlr_info_t *h;
- if (reset_devices) {
- /* Reset the controller with a PCI power-cycle */
- if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
- return -ENODEV;
-
- /* Now try to get the controller to respond to a no-op. Some
- devices (notably the HP Smart Array 5i Controller) need
- up to 30 seconds to respond. */
- for (i=0; i<30; i++) {
- if (cciss_noop(pdev) == 0)
- break;
-
- schedule_timeout_uninterruptible(HZ);
- }
- if (i == 30) {
- printk(KERN_ERR "cciss: controller seems dead\n");
- return -EBUSY;
- }
- }
-
- i = alloc_cciss_hba();
+ rc = cciss_init_reset_devices(pdev);
+ if (rc)
+ return rc;
+ i = alloc_cciss_hba(pdev);
if (i < 0)
return -1;
- hba[i]->busy_initializing = 1;
- INIT_HLIST_HEAD(&hba[i]->cmpQ);
- INIT_HLIST_HEAD(&hba[i]->reqQ);
- mutex_init(&hba[i]->busy_shutting_down);
+ h = hba[i];
+ h->pdev = pdev;
+ h->busy_initializing = 1;
+ INIT_HLIST_HEAD(&h->cmpQ);
+ INIT_HLIST_HEAD(&h->reqQ);
+ mutex_init(&h->busy_shutting_down);
- if (cciss_pci_init(hba[i], pdev) != 0)
+ if (cciss_pci_init(h) != 0)
goto clean_no_release_regions;
- sprintf(hba[i]->devname, "cciss%d", i);
- hba[i]->ctlr = i;
- hba[i]->pdev = pdev;
+ sprintf(h->devname, "cciss%d", i);
+ h->ctlr = i;
- init_completion(&hba[i]->scan_wait);
+ init_completion(&h->scan_wait);
- if (cciss_create_hba_sysfs_entry(hba[i]))
+ if (cciss_create_hba_sysfs_entry(h))
goto clean0;
/* configure PCI DMA stuff */
else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
dac = 0;
else {
- printk(KERN_ERR "cciss: no suitable DMA available\n");
+ dev_err(&h->pdev->dev, "no suitable DMA available\n");
goto clean1;
}
* 8 controller support.
*/
if (i < MAX_CTLR_ORIG)
- hba[i]->major = COMPAQ_CISS_MAJOR + i;
- rc = register_blkdev(hba[i]->major, hba[i]->devname);
+ h->major = COMPAQ_CISS_MAJOR + i;
+ rc = register_blkdev(h->major, h->devname);
if (rc == -EBUSY || rc == -EINVAL) {
- printk(KERN_ERR
- "cciss: Unable to get major number %d for %s "
- "on hba %d\n", hba[i]->major, hba[i]->devname, i);
+ dev_err(&h->pdev->dev,
+ "Unable to get major number %d for %s "
+ "on hba %d\n", h->major, h->devname, i);
goto clean1;
} else {
if (i >= MAX_CTLR_ORIG)
- hba[i]->major = rc;
+ h->major = rc;
}
/* make sure the board interrupts are off */
- hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF);
- if (request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intr,
- IRQF_DISABLED | IRQF_SHARED, hba[i]->devname, hba[i])) {
- printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
- hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
- goto clean2;
+ h->access.set_intr_mask(h, CCISS_INTR_OFF);
+ if (h->msi_vector || h->msix_vector) {
+ if (request_irq(h->intr[PERF_MODE_INT],
+ do_cciss_msix_intr,
+ IRQF_DISABLED, h->devname, h)) {
+ dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
+ h->intr[PERF_MODE_INT], h->devname);
+ goto clean2;
+ }
+ } else {
+ if (request_irq(h->intr[PERF_MODE_INT], do_cciss_intx,
+ IRQF_DISABLED, h->devname, h)) {
+ dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
+ h->intr[PERF_MODE_INT], h->devname);
+ goto clean2;
+ }
}
- printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
- hba[i]->devname, pdev->device, pci_name(pdev),
- hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
+ dev_info(&h->pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
+ h->devname, pdev->device, pci_name(pdev),
+ h->intr[PERF_MODE_INT], dac ? "" : " not");
- hba[i]->cmd_pool_bits =
- kmalloc(DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
+ h->cmd_pool_bits =
+ kmalloc(DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG)
* sizeof(unsigned long), GFP_KERNEL);
- hba[i]->cmd_pool = (CommandList_struct *)
- pci_alloc_consistent(hba[i]->pdev,
- hba[i]->nr_cmds * sizeof(CommandList_struct),
- &(hba[i]->cmd_pool_dhandle));
- hba[i]->errinfo_pool = (ErrorInfo_struct *)
- pci_alloc_consistent(hba[i]->pdev,
- hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
- &(hba[i]->errinfo_pool_dhandle));
- if ((hba[i]->cmd_pool_bits == NULL)
- || (hba[i]->cmd_pool == NULL)
- || (hba[i]->errinfo_pool == NULL)) {
- printk(KERN_ERR "cciss: out of memory");
+ h->cmd_pool = (CommandList_struct *)
+ pci_alloc_consistent(h->pdev,
+ h->nr_cmds * sizeof(CommandList_struct),
+ &(h->cmd_pool_dhandle));
+ h->errinfo_pool = (ErrorInfo_struct *)
+ pci_alloc_consistent(h->pdev,
+ h->nr_cmds * sizeof(ErrorInfo_struct),
+ &(h->errinfo_pool_dhandle));
+ if ((h->cmd_pool_bits == NULL)
+ || (h->cmd_pool == NULL)
+ || (h->errinfo_pool == NULL)) {
+ dev_err(&h->pdev->dev, "out of memory");
goto clean4;
}
/* Need space for temp scatter list */
- hba[i]->scatter_list = kmalloc(hba[i]->max_commands *
+ h->scatter_list = kmalloc(h->max_commands *
sizeof(struct scatterlist *),
GFP_KERNEL);
- for (k = 0; k < hba[i]->nr_cmds; k++) {
- hba[i]->scatter_list[k] = kmalloc(sizeof(struct scatterlist) *
- hba[i]->maxsgentries,
+ for (k = 0; k < h->nr_cmds; k++) {
+ h->scatter_list[k] = kmalloc(sizeof(struct scatterlist) *
+ h->maxsgentries,
GFP_KERNEL);
- if (hba[i]->scatter_list[k] == NULL) {
- printk(KERN_ERR "cciss%d: could not allocate "
- "s/g lists\n", i);
+ if (h->scatter_list[k] == NULL) {
+ dev_err(&h->pdev->dev,
+ "could not allocate s/g lists\n");
goto clean4;
}
}
- hba[i]->cmd_sg_list = cciss_allocate_sg_chain_blocks(hba[i],
- hba[i]->chainsize, hba[i]->nr_cmds);
- if (!hba[i]->cmd_sg_list && hba[i]->chainsize > 0)
+ h->cmd_sg_list = cciss_allocate_sg_chain_blocks(h,
+ h->chainsize, h->nr_cmds);
+ if (!h->cmd_sg_list && h->chainsize > 0)
goto clean4;
- spin_lock_init(&hba[i]->lock);
+ spin_lock_init(&h->lock);
/* Initialize the pdev driver private data.
- have it point to hba[i]. */
- pci_set_drvdata(pdev, hba[i]);
+ have it point to h. */
+ pci_set_drvdata(pdev, h);
/* command and error info recs zeroed out before
they are used */
- memset(hba[i]->cmd_pool_bits, 0,
- DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
+ memset(h->cmd_pool_bits, 0,
+ DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG)
* sizeof(unsigned long));
- hba[i]->num_luns = 0;
- hba[i]->highest_lun = -1;
+ h->num_luns = 0;
+ h->highest_lun = -1;
for (j = 0; j < CISS_MAX_LUN; j++) {
- hba[i]->drv[j] = NULL;
- hba[i]->gendisk[j] = NULL;
+ h->drv[j] = NULL;
+ h->gendisk[j] = NULL;
}
- cciss_scsi_setup(i);
+ cciss_scsi_setup(h);
/* Turn the interrupts on so we can service requests */
- hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
+ h->access.set_intr_mask(h, CCISS_INTR_ON);
/* Get the firmware version */
inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
if (inq_buff == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
+ dev_err(&h->pdev->dev, "out of memory\n");
goto clean4;
}
- return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff,
+ return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff,
sizeof(InquiryData_struct), 0, CTLR_LUNID, TYPE_CMD);
if (return_code == IO_OK) {
- hba[i]->firm_ver[0] = inq_buff->data_byte[32];
- hba[i]->firm_ver[1] = inq_buff->data_byte[33];
- hba[i]->firm_ver[2] = inq_buff->data_byte[34];
- hba[i]->firm_ver[3] = inq_buff->data_byte[35];
+ h->firm_ver[0] = inq_buff->data_byte[32];
+ h->firm_ver[1] = inq_buff->data_byte[33];
+ h->firm_ver[2] = inq_buff->data_byte[34];
+ h->firm_ver[3] = inq_buff->data_byte[35];
} else { /* send command failed */
- printk(KERN_WARNING "cciss: unable to determine firmware"
+ dev_warn(&h->pdev->dev, "unable to determine firmware"
" version of controller\n");
}
kfree(inq_buff);
- cciss_procinit(i);
+ cciss_procinit(h);
- hba[i]->cciss_max_sectors = 8192;
+ h->cciss_max_sectors = 8192;
- rebuild_lun_table(hba[i], 1, 0);
- hba[i]->busy_initializing = 0;
+ rebuild_lun_table(h, 1, 0);
+ h->busy_initializing = 0;
return 1;
clean4:
- kfree(hba[i]->cmd_pool_bits);
+ kfree(h->cmd_pool_bits);
/* Free up sg elements */
- for (k = 0; k < hba[i]->nr_cmds; k++)
- kfree(hba[i]->scatter_list[k]);
- kfree(hba[i]->scatter_list);
- cciss_free_sg_chain_blocks(hba[i]->cmd_sg_list, hba[i]->nr_cmds);
- if (hba[i]->cmd_pool)
- pci_free_consistent(hba[i]->pdev,
- hba[i]->nr_cmds * sizeof(CommandList_struct),
- hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
- if (hba[i]->errinfo_pool)
- pci_free_consistent(hba[i]->pdev,
- hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
- hba[i]->errinfo_pool,
- hba[i]->errinfo_pool_dhandle);
- free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
+ for (k = 0; k < h->nr_cmds; k++)
+ kfree(h->scatter_list[k]);
+ kfree(h->scatter_list);
+ cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
+ if (h->cmd_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(CommandList_struct),
+ h->cmd_pool, h->cmd_pool_dhandle);
+ if (h->errinfo_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(ErrorInfo_struct),
+ h->errinfo_pool,
+ h->errinfo_pool_dhandle);
+ free_irq(h->intr[PERF_MODE_INT], h);
clean2:
- unregister_blkdev(hba[i]->major, hba[i]->devname);
+ unregister_blkdev(h->major, h->devname);
clean1:
- cciss_destroy_hba_sysfs_entry(hba[i]);
+ cciss_destroy_hba_sysfs_entry(h);
clean0:
pci_release_regions(pdev);
clean_no_release_regions:
- hba[i]->busy_initializing = 0;
+ h->busy_initializing = 0;
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
pci_set_drvdata(pdev, NULL);
- free_hba(i);
+ free_hba(h);
return -1;
}
h = pci_get_drvdata(pdev);
flush_buf = kzalloc(4, GFP_KERNEL);
if (!flush_buf) {
- printk(KERN_WARNING
- "cciss:%d cache not flushed, out of memory.\n",
- h->ctlr);
+ dev_warn(&h->pdev->dev, "cache not flushed, out of memory.\n");
return;
}
/* write all data in the battery backed cache to disk */
memset(flush_buf, 0, 4);
- return_code = sendcmd_withirq(CCISS_CACHE_FLUSH, h->ctlr, flush_buf,
+ return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf,
4, 0, CTLR_LUNID, TYPE_CMD);
kfree(flush_buf);
if (return_code != IO_OK)
- printk(KERN_WARNING "cciss%d: Error flushing cache\n",
- h->ctlr);
+ dev_warn(&h->pdev->dev, "Error flushing cache\n");
h->access.set_intr_mask(h, CCISS_INTR_OFF);
- free_irq(h->intr[2], h);
+ free_irq(h->intr[PERF_MODE_INT], h);
}
static void __devexit cciss_remove_one(struct pci_dev *pdev)
{
- ctlr_info_t *tmp_ptr;
+ ctlr_info_t *h;
int i, j;
if (pci_get_drvdata(pdev) == NULL) {
- printk(KERN_ERR "cciss: Unable to remove device \n");
+ dev_err(&pdev->dev, "Unable to remove device\n");
return;
}
- tmp_ptr = pci_get_drvdata(pdev);
- i = tmp_ptr->ctlr;
+ h = pci_get_drvdata(pdev);
+ i = h->ctlr;
if (hba[i] == NULL) {
- printk(KERN_ERR "cciss: device appears to "
- "already be removed \n");
+ dev_err(&pdev->dev, "device appears to already be removed\n");
return;
}
- mutex_lock(&hba[i]->busy_shutting_down);
+ mutex_lock(&h->busy_shutting_down);
- remove_from_scan_list(hba[i]);
- remove_proc_entry(hba[i]->devname, proc_cciss);
- unregister_blkdev(hba[i]->major, hba[i]->devname);
+ remove_from_scan_list(h);
+ remove_proc_entry(h->devname, proc_cciss);
+ unregister_blkdev(h->major, h->devname);
/* remove it from the disk list */
for (j = 0; j < CISS_MAX_LUN; j++) {
- struct gendisk *disk = hba[i]->gendisk[j];
+ struct gendisk *disk = h->gendisk[j];
if (disk) {
struct request_queue *q = disk->queue;
if (disk->flags & GENHD_FL_UP) {
- cciss_destroy_ld_sysfs_entry(hba[i], j, 1);
+ cciss_destroy_ld_sysfs_entry(h, j, 1);
del_gendisk(disk);
}
if (q)
}
#ifdef CONFIG_CISS_SCSI_TAPE
- cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
+ cciss_unregister_scsi(h); /* unhook from SCSI subsystem */
#endif
cciss_shutdown(pdev);
#ifdef CONFIG_PCI_MSI
- if (hba[i]->msix_vector)
- pci_disable_msix(hba[i]->pdev);
- else if (hba[i]->msi_vector)
- pci_disable_msi(hba[i]->pdev);
+ if (h->msix_vector)
+ pci_disable_msix(h->pdev);
+ else if (h->msi_vector)
+ pci_disable_msi(h->pdev);
#endif /* CONFIG_PCI_MSI */
- iounmap(hba[i]->vaddr);
+ iounmap(h->transtable);
+ iounmap(h->cfgtable);
+ iounmap(h->vaddr);
- pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct),
- hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
- pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
- hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
- kfree(hba[i]->cmd_pool_bits);
+ pci_free_consistent(h->pdev, h->nr_cmds * sizeof(CommandList_struct),
+ h->cmd_pool, h->cmd_pool_dhandle);
+ pci_free_consistent(h->pdev, h->nr_cmds * sizeof(ErrorInfo_struct),
+ h->errinfo_pool, h->errinfo_pool_dhandle);
+ kfree(h->cmd_pool_bits);
/* Free up sg elements */
- for (j = 0; j < hba[i]->nr_cmds; j++)
- kfree(hba[i]->scatter_list[j]);
- kfree(hba[i]->scatter_list);
- cciss_free_sg_chain_blocks(hba[i]->cmd_sg_list, hba[i]->nr_cmds);
+ for (j = 0; j < h->nr_cmds; j++)
+ kfree(h->scatter_list[j]);
+ kfree(h->scatter_list);
+ cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
- cciss_destroy_hba_sysfs_entry(hba[i]);
- mutex_unlock(&hba[i]->busy_shutting_down);
- free_hba(i);
+ cciss_destroy_hba_sysfs_entry(h);
+ mutex_unlock(&h->busy_shutting_down);
+ free_hba(h);
}
static struct pci_driver cciss_pci_driver = {
* array of them, the size must be a multiple of 8 bytes.
*/
BUILD_BUG_ON(sizeof(CommandList_struct) % COMMANDLIST_ALIGNMENT);
-
printk(KERN_INFO DRIVER_NAME "\n");
err = bus_register(&cciss_bus_type);
/* double check that all controller entrys have been removed */
for (i = 0; i < MAX_CTLR; i++) {
if (hba[i] != NULL) {
- printk(KERN_WARNING "cciss: had to remove"
- " controller %d\n", i);
+ dev_warn(&hba[i]->pdev->dev,
+ "had to remove controller\n");
cciss_remove_one(hba[i]->pdev);
}
}
bus_unregister(&cciss_bus_type);
}
-static void fail_all_cmds(unsigned long ctlr)
-{
- /* If we get here, the board is apparently dead. */
- ctlr_info_t *h = hba[ctlr];
- CommandList_struct *c;
- unsigned long flags;
-
- printk(KERN_WARNING "cciss%d: controller not responding.\n", h->ctlr);
- h->alive = 0; /* the controller apparently died... */
-
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
-
- pci_disable_device(h->pdev); /* Make sure it is really dead. */
-
- /* move everything off the request queue onto the completed queue */
- while (!hlist_empty(&h->reqQ)) {
- c = hlist_entry(h->reqQ.first, CommandList_struct, list);
- removeQ(c);
- h->Qdepth--;
- addQ(&h->cmpQ, c);
- }
-
- /* Now, fail everything on the completed queue with a HW error */
- while (!hlist_empty(&h->cmpQ)) {
- c = hlist_entry(h->cmpQ.first, CommandList_struct, list);
- removeQ(c);
- if (c->cmd_type != CMD_MSG_STALE)
- c->err_info->CommandStatus = CMD_HARDWARE_ERR;
- if (c->cmd_type == CMD_RWREQ) {
- complete_command(h, c, 0);
- } else if (c->cmd_type == CMD_IOCTL_PEND)
- complete(c->waiting);
-#ifdef CONFIG_CISS_SCSI_TAPE
- else if (c->cmd_type == CMD_SCSI)
- complete_scsi_command(c, 0, 0);
-#endif
- }
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- return;
-}
-
module_init(cciss_init);
module_exit(cciss_cleanup);
void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
unsigned long (*fifo_full)(ctlr_info_t *h);
- unsigned long (*intr_pending)(ctlr_info_t *h);
+ bool (*intr_pending)(ctlr_info_t *h);
unsigned long (*command_completed)(ctlr_info_t *h);
};
typedef struct _drive_info_struct
int max_cmd_sgentries;
SGDescriptor_struct **cmd_sg_list;
-# define DOORBELL_INT 0
-# define PERF_MODE_INT 1
+# define PERF_MODE_INT 0
+# define DOORBELL_INT 1
# define SIMPLE_MODE_INT 2
# define MEMQ_MODE_INT 3
unsigned int intr[4];
struct list_head scan_list;
struct completion scan_wait;
struct device dev;
+ /*
+ * Performant mode tables.
+ */
+ u32 trans_support;
+ u32 trans_offset;
+ struct TransTable_struct *transtable;
+ unsigned long transMethod;
+
+ /*
+ * Performant mode completion buffer
+ */
+ u64 *reply_pool;
+ dma_addr_t reply_pool_dhandle;
+ u64 *reply_pool_head;
+ size_t reply_pool_size;
+ unsigned char reply_pool_wraparound;
+ u32 *blockFetchTable;
};
-/* Defining the diffent access_menthods */
-/*
+/* Defining the diffent access_methods
+ *
* Memory mapped FIFO interface (SMART 53xx cards)
*/
#define SA5_DOORBELL 0x20
#define SA5B_INTR_PENDING 0x04
#define FIFO_EMPTY 0xffffffff
#define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
+/* Perf. mode flags */
+#define SA5_PERF_INTR_PENDING 0x04
+#define SA5_PERF_INTR_OFF 0x05
+#define SA5_OUTDB_STATUS_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR 0xA0
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_STATUS 0x9C
+
#define CISS_ERROR_BIT 0x02
#define CCISS_INTR_ON 1
#define CCISS_INTR_OFF 0
+
+
+/* CCISS_BOARD_READY_WAIT_SECS is how long to wait for a board
+ * to become ready, in seconds, before giving up on it.
+ * CCISS_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
+ * between polling the board to see if it is ready, in
+ * milliseconds. CCISS_BOARD_READY_ITERATIONS is derived
+ * the above.
+ */
+#define CCISS_BOARD_READY_WAIT_SECS (120)
+#define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
+#define CCISS_BOARD_READY_ITERATIONS \
+ ((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
+ CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
+#define CCISS_POST_RESET_PAUSE_MSECS (3000)
+#define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (1000)
+#define CCISS_POST_RESET_NOOP_RETRIES (12)
+
/*
Send the command to the hardware
*/
static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
{
#ifdef CCISS_DEBUG
- printk("Sending %x - down to controller\n", c->busaddr );
-#endif /* CCISS_DEBUG */
+ printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n",
+ h->ctlr, c->busaddr);
+#endif /* CCISS_DEBUG */
writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
h->commands_outstanding++;
if ( h->commands_outstanding > h->max_outstanding)
h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
}
}
+
+/* Performant mode intr_mask */
+static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val)
+{
+ if (val) { /* turn on interrupts */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else {
+ h->interrupts_enabled = 0;
+ writel(SA5_PERF_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
/*
* Returns true if fifo is full.
*
return ( register_value);
}
+
+/* Performant mode command completed */
+static unsigned long SA5_performant_completed(ctlr_info_t *h)
+{
+ unsigned long register_value = FIFO_EMPTY;
+
+ /* flush the controller write of the reply queue by reading
+ * outbound doorbell status register.
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ /* msi auto clears the interrupt pending bit. */
+ if (!(h->msi_vector || h->msix_vector)) {
+ writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
+ /* Do a read in order to flush the write to the controller
+ * (as per spec.)
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ }
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ register_value = *(h->reply_pool_head);
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ register_value = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+
+ return register_value;
+}
/*
* Returns true if an interrupt is pending..
*/
-static unsigned long SA5_intr_pending(ctlr_info_t *h)
+static bool SA5_intr_pending(ctlr_info_t *h)
{
unsigned long register_value =
readl(h->vaddr + SA5_INTR_STATUS);
/*
* Returns true if an interrupt is pending..
*/
-static unsigned long SA5B_intr_pending(ctlr_info_t *h)
+static bool SA5B_intr_pending(ctlr_info_t *h)
{
unsigned long register_value =
readl(h->vaddr + SA5_INTR_STATUS);
return 0 ;
}
+static bool SA5_performant_intr_pending(ctlr_info_t *h)
+{
+ unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+ if (!register_value)
+ return false;
+
+ if (h->msi_vector || h->msix_vector)
+ return true;
+
+ /* Read outbound doorbell to flush */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ return register_value & SA5_OUTDB_STATUS_PERF_BIT;
+}
static struct access_method SA5_access = {
SA5_submit_command,
SA5_completed,
};
+static struct access_method SA5_performant_access = {
+ SA5_submit_command,
+ SA5_performant_intr_mask,
+ SA5_fifo_full,
+ SA5_performant_intr_pending,
+ SA5_performant_completed,
+};
+
struct board_type {
__u32 board_id;
char *product_name;
int nr_cmds; /* Max cmds this kind of ctlr can handle. */
};
-#define CCISS_LOCK(i) (&hba[i]->lock)
-
#endif /* CCISS_H */
/* Configuration Table */
#define CFGTBL_ChangeReq 0x00000001l
#define CFGTBL_AccCmds 0x00000001l
+#define DOORBELL_CTLR_RESET 0x00000004l
#define CFGTBL_Trans_Simple 0x00000002l
+#define CFGTBL_Trans_Performant 0x00000004l
#define CFGTBL_BusType_Ultra2 0x00000001l
#define CFGTBL_BusType_Ultra3 0x00000002l
* PAD_64 can be adjusted independently as needed for 32-bit
* and 64-bits systems.
*/
-#define COMMANDLIST_ALIGNMENT (8)
+#define COMMANDLIST_ALIGNMENT (32)
#define IS_64_BIT ((sizeof(long) - 4)/4)
#define IS_32_BIT (!IS_64_BIT)
#define PAD_32 (0)
#define PAD_64 (4)
#define PADSIZE (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
+#define DIRECT_LOOKUP_BIT 0x10
+#define DIRECT_LOOKUP_SHIFT 5
+
typedef struct _CommandList_struct {
CommandListHeader_struct Header;
RequestBlock_struct Request;
struct completion *waiting;
int retry_count;
void * scsi_cmd;
- char pad[PADSIZE];
+ char pad[PADSIZE];
} CommandList_struct;
/* Configuration Table Structure */
typedef struct _CfgTable_struct {
BYTE Signature[4];
DWORD SpecValence;
+#define SIMPLE_MODE 0x02
+#define PERFORMANT_MODE 0x04
+#define MEMQ_MODE 0x08
DWORD TransportSupport;
DWORD TransportActive;
HostWrite_struct HostWrite;
DWORD CmdsOutMax;
DWORD BusTypes;
- DWORD Reserved;
+ DWORD TransMethodOffset;
BYTE ServerName[16];
DWORD HeartBeat;
DWORD SCSI_Prefetch;
DWORD MaxLogicalUnits;
DWORD MaxPhysicalDrives;
DWORD MaxPhysicalDrivesPerLogicalUnit;
+ DWORD MaxPerformantModeCommands;
+ u8 reserved[0x78 - 0x58];
+ u32 misc_fw_support; /* offset 0x78 */
+#define MISC_FW_DOORBELL_RESET (0x02)
} CfgTable_struct;
+
+struct TransTable_struct {
+ u32 BlockFetch0;
+ u32 BlockFetch1;
+ u32 BlockFetch2;
+ u32 BlockFetch3;
+ u32 BlockFetch4;
+ u32 BlockFetch5;
+ u32 BlockFetch6;
+ u32 BlockFetch7;
+ u32 RepQSize;
+ u32 RepQCount;
+ u32 RepQCtrAddrLow32;
+ u32 RepQCtrAddrHigh32;
+ u32 RepQAddr0Low32;
+ u32 RepQAddr0High32;
+};
+
#pragma pack()
#endif /* CCISS_CMD_H */
#define CCISS_ABORT_MSG 0x00
#define CCISS_RESET_MSG 0x01
-static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
+static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
size_t size,
__u8 page_code, unsigned char *scsi3addr,
int cmd_type);
-static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool);
-static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool);
+static CommandList_struct *cmd_alloc(ctlr_info_t *h);
+static CommandList_struct *cmd_special_alloc(ctlr_info_t *h);
+static void cmd_free(ctlr_info_t *h, CommandList_struct *c);
+static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c);
static int cciss_scsi_proc_info(
struct Scsi_Host *sh,
#pragma pack(1)
-#define SCSI_PAD_32 0
-#define SCSI_PAD_64 0
+#define SCSI_PAD_32 8
+#define SCSI_PAD_64 8
struct cciss_scsi_cmd_stack_elem_t {
CommandList_struct cmd;
spinlock_t lock; // to protect ccissscsi[ctlr];
};
-#define CPQ_TAPE_LOCK(ctlr, flags) spin_lock_irqsave( \
- &hba[ctlr]->scsi_ctlr->lock, flags);
-#define CPQ_TAPE_UNLOCK(ctlr, flags) spin_unlock_irqrestore( \
- &hba[ctlr]->scsi_ctlr->lock, flags);
+#define CPQ_TAPE_LOCK(h, flags) spin_lock_irqsave( \
+ &h->scsi_ctlr->lock, flags);
+#define CPQ_TAPE_UNLOCK(h, flags) spin_unlock_irqrestore( \
+ &h->scsi_ctlr->lock, flags);
static CommandList_struct *
scsi_cmd_alloc(ctlr_info_t *h)
{
/* assume only one process in here at a time, locking done by caller. */
- /* use CCISS_LOCK(ctlr) */
+ /* use h->lock */
/* might be better to rewrite how we allocate scsi commands in a way that */
/* needs no locking at all. */
}
static void
-scsi_cmd_free(ctlr_info_t *h, CommandList_struct *cmd)
+scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c)
{
/* assume only one process in here at a time, locking done by caller. */
- /* use CCISS_LOCK(ctlr) */
+ /* use h->lock */
/* drop the free memory chunk on top of the stack. */
struct cciss_scsi_adapter_data_t *sa;
stk = &sa->cmd_stack;
stk->top++;
if (stk->top >= CMD_STACK_SIZE) {
- printk("cciss: scsi_cmd_free called too many times.\n");
+ dev_err(&h->pdev->dev,
+ "scsi_cmd_free called too many times.\n");
BUG();
}
- stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) cmd;
+ stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) c;
}
static int
-scsi_cmd_stack_setup(int ctlr, struct cciss_scsi_adapter_data_t *sa)
+scsi_cmd_stack_setup(ctlr_info_t *h, struct cciss_scsi_adapter_data_t *sa)
{
int i;
struct cciss_scsi_cmd_stack_t *stk;
size_t size;
- sa->cmd_sg_list = cciss_allocate_sg_chain_blocks(hba[ctlr],
- hba[ctlr]->chainsize, CMD_STACK_SIZE);
- if (!sa->cmd_sg_list && hba[ctlr]->chainsize > 0)
+ sa->cmd_sg_list = cciss_allocate_sg_chain_blocks(h,
+ h->chainsize, CMD_STACK_SIZE);
+ if (!sa->cmd_sg_list && h->chainsize > 0)
return -ENOMEM;
stk = &sa->cmd_stack;
BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0);
/* pci_alloc_consistent guarantees 32-bit DMA address will be used */
stk->pool = (struct cciss_scsi_cmd_stack_elem_t *)
- pci_alloc_consistent(hba[ctlr]->pdev, size, &stk->cmd_pool_handle);
+ pci_alloc_consistent(h->pdev, size, &stk->cmd_pool_handle);
if (stk->pool == NULL) {
cciss_free_sg_chain_blocks(sa->cmd_sg_list, CMD_STACK_SIZE);
}
static void
-scsi_cmd_stack_free(int ctlr)
+scsi_cmd_stack_free(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t *sa;
struct cciss_scsi_cmd_stack_t *stk;
size_t size;
- sa = hba[ctlr]->scsi_ctlr;
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
if (stk->top != CMD_STACK_SIZE-1) {
- printk( "cciss: %d scsi commands are still outstanding.\n",
+ dev_warn(&h->pdev->dev,
+ "bug: %d scsi commands are still outstanding.\n",
CMD_STACK_SIZE - stk->top);
- // BUG();
- printk("WE HAVE A BUG HERE!!! stk=0x%p\n", stk);
}
size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * CMD_STACK_SIZE;
- pci_free_consistent(hba[ctlr]->pdev, size, stk->pool, stk->cmd_pool_handle);
+ pci_free_consistent(h->pdev, size, stk->pool, stk->cmd_pool_handle);
stk->pool = NULL;
cciss_free_sg_chain_blocks(sa->cmd_sg_list, CMD_STACK_SIZE);
}
#endif
static int
-find_bus_target_lun(int ctlr, int *bus, int *target, int *lun)
+find_bus_target_lun(ctlr_info_t *h, int *bus, int *target, int *lun)
{
/* finds an unused bus, target, lun for a new device */
- /* assumes hba[ctlr]->scsi_ctlr->lock is held */
+ /* assumes h->scsi_ctlr->lock is held */
int i, found=0;
unsigned char target_taken[CCISS_MAX_SCSI_DEVS_PER_HBA];
memset(&target_taken[0], 0, CCISS_MAX_SCSI_DEVS_PER_HBA);
target_taken[SELF_SCSI_ID] = 1;
- for (i=0;i<ccissscsi[ctlr].ndevices;i++)
- target_taken[ccissscsi[ctlr].dev[i].target] = 1;
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++)
+ target_taken[ccissscsi[h->ctlr].dev[i].target] = 1;
- for (i=0;i<CCISS_MAX_SCSI_DEVS_PER_HBA;i++) {
+ for (i = 0; i < CCISS_MAX_SCSI_DEVS_PER_HBA; i++) {
if (!target_taken[i]) {
*bus = 0; *target=i; *lun = 0; found=1;
break;
};
static int
-cciss_scsi_add_entry(int ctlr, int hostno,
+cciss_scsi_add_entry(ctlr_info_t *h, int hostno,
struct cciss_scsi_dev_t *device,
struct scsi2map *added, int *nadded)
{
- /* assumes hba[ctlr]->scsi_ctlr->lock is held */
- int n = ccissscsi[ctlr].ndevices;
+ /* assumes h->scsi_ctlr->lock is held */
+ int n = ccissscsi[h->ctlr].ndevices;
struct cciss_scsi_dev_t *sd;
int i, bus, target, lun;
unsigned char addr1[8], addr2[8];
if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
- printk("cciss%d: Too many devices, "
- "some will be inaccessible.\n", ctlr);
+ dev_warn(&h->pdev->dev, "Too many devices, "
+ "some will be inaccessible.\n");
return -1;
}
memcpy(addr1, device->scsi3addr, 8);
addr1[4] = 0;
for (i = 0; i < n; i++) {
- sd = &ccissscsi[ctlr].dev[i];
+ sd = &ccissscsi[h->ctlr].dev[i];
memcpy(addr2, sd->scsi3addr, 8);
addr2[4] = 0;
/* differ only in byte 4? */
}
}
- sd = &ccissscsi[ctlr].dev[n];
+ sd = &ccissscsi[h->ctlr].dev[n];
if (lun == 0) {
- if (find_bus_target_lun(ctlr,
+ if (find_bus_target_lun(h,
&sd->bus, &sd->target, &sd->lun) != 0)
return -1;
} else {
memcpy(sd->device_id, device->device_id, sizeof(sd->device_id));
sd->devtype = device->devtype;
- ccissscsi[ctlr].ndevices++;
+ ccissscsi[h->ctlr].ndevices++;
/* initially, (before registering with scsi layer) we don't
know our hostno and we don't want to print anything first
time anyway (the scsi layer's inquiries will show that info) */
if (hostno != -1)
- printk("cciss%d: %s device c%db%dt%dl%d added.\n",
- ctlr, scsi_device_type(sd->devtype), hostno,
+ dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n",
+ scsi_device_type(sd->devtype), hostno,
sd->bus, sd->target, sd->lun);
return 0;
}
static void
-cciss_scsi_remove_entry(int ctlr, int hostno, int entry,
+cciss_scsi_remove_entry(ctlr_info_t *h, int hostno, int entry,
struct scsi2map *removed, int *nremoved)
{
- /* assumes hba[ctlr]->scsi_ctlr->lock is held */
+ /* assumes h->ctlr]->scsi_ctlr->lock is held */
int i;
struct cciss_scsi_dev_t sd;
if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return;
- sd = ccissscsi[ctlr].dev[entry];
+ sd = ccissscsi[h->ctlr].dev[entry];
removed[*nremoved].bus = sd.bus;
removed[*nremoved].target = sd.target;
removed[*nremoved].lun = sd.lun;
(*nremoved)++;
- for (i=entry;i<ccissscsi[ctlr].ndevices-1;i++)
- ccissscsi[ctlr].dev[i] = ccissscsi[ctlr].dev[i+1];
- ccissscsi[ctlr].ndevices--;
- printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- ctlr, scsi_device_type(sd.devtype), hostno,
+ for (i = entry; i < ccissscsi[h->ctlr].ndevices-1; i++)
+ ccissscsi[h->ctlr].dev[i] = ccissscsi[h->ctlr].dev[i+1];
+ ccissscsi[h->ctlr].ndevices--;
+ dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n",
+ scsi_device_type(sd.devtype), hostno,
sd.bus, sd.target, sd.lun);
}
(a)[1] == (b)[1] && \
(a)[0] == (b)[0])
-static void fixup_botched_add(int ctlr, char *scsi3addr)
+static void fixup_botched_add(ctlr_info_t *h, char *scsi3addr)
{
/* called when scsi_add_device fails in order to re-adjust */
/* ccissscsi[] to match the mid layer's view. */
unsigned long flags;
int i, j;
- CPQ_TAPE_LOCK(ctlr, flags);
- for (i = 0; i < ccissscsi[ctlr].ndevices; i++) {
+ CPQ_TAPE_LOCK(h, flags);
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
if (memcmp(scsi3addr,
- ccissscsi[ctlr].dev[i].scsi3addr, 8) == 0) {
- for (j = i; j < ccissscsi[ctlr].ndevices-1; j++)
- ccissscsi[ctlr].dev[j] =
- ccissscsi[ctlr].dev[j+1];
- ccissscsi[ctlr].ndevices--;
+ ccissscsi[h->ctlr].dev[i].scsi3addr, 8) == 0) {
+ for (j = i; j < ccissscsi[h->ctlr].ndevices-1; j++)
+ ccissscsi[h->ctlr].dev[j] =
+ ccissscsi[h->ctlr].dev[j+1];
+ ccissscsi[h->ctlr].ndevices--;
break;
}
}
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ CPQ_TAPE_UNLOCK(h, flags);
}
static int device_is_the_same(struct cciss_scsi_dev_t *dev1,
}
static int
-adjust_cciss_scsi_table(int ctlr, int hostno,
+adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
struct cciss_scsi_dev_t sd[], int nsds)
{
/* sd contains scsi3 addresses and devtypes, but
GFP_KERNEL);
if (!added || !removed) {
- printk(KERN_WARNING "cciss%d: Out of memory in "
- "adjust_cciss_scsi_table\n", ctlr);
+ dev_warn(&h->pdev->dev,
+ "Out of memory in adjust_cciss_scsi_table\n");
goto free_and_out;
}
- CPQ_TAPE_LOCK(ctlr, flags);
+ CPQ_TAPE_LOCK(h, flags);
if (hostno != -1) /* if it's not the first time... */
- sh = hba[ctlr]->scsi_ctlr->scsi_host;
+ sh = h->scsi_ctlr->scsi_host;
/* find any devices in ccissscsi[] that are not in
sd[] and remove them from ccissscsi[] */
i = 0;
nremoved = 0;
nadded = 0;
- while(i<ccissscsi[ctlr].ndevices) {
- csd = &ccissscsi[ctlr].dev[i];
+ while (i < ccissscsi[h->ctlr].ndevices) {
+ csd = &ccissscsi[h->ctlr].dev[i];
found=0;
for (j=0;j<nsds;j++) {
if (SCSI3ADDR_EQ(sd[j].scsi3addr,
if (found == 0) { /* device no longer present. */
changes++;
- /* printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- ctlr, scsi_device_type(csd->devtype), hostno,
- csd->bus, csd->target, csd->lun); */
- cciss_scsi_remove_entry(ctlr, hostno, i,
+ cciss_scsi_remove_entry(h, hostno, i,
removed, &nremoved);
/* remove ^^^, hence i not incremented */
} else if (found == 1) { /* device is different in some way */
changes++;
- printk("cciss%d: device c%db%dt%dl%d has changed.\n",
- ctlr, hostno, csd->bus, csd->target, csd->lun);
- cciss_scsi_remove_entry(ctlr, hostno, i,
+ dev_info(&h->pdev->dev,
+ "device c%db%dt%dl%d has changed.\n",
+ hostno, csd->bus, csd->target, csd->lun);
+ cciss_scsi_remove_entry(h, hostno, i,
removed, &nremoved);
/* remove ^^^, hence i not incremented */
- if (cciss_scsi_add_entry(ctlr, hostno, &sd[j],
+ if (cciss_scsi_add_entry(h, hostno, &sd[j],
added, &nadded) != 0)
/* we just removed one, so add can't fail. */
BUG();
for (i=0;i<nsds;i++) {
found=0;
- for (j=0;j<ccissscsi[ctlr].ndevices;j++) {
- csd = &ccissscsi[ctlr].dev[j];
+ for (j = 0; j < ccissscsi[h->ctlr].ndevices; j++) {
+ csd = &ccissscsi[h->ctlr].dev[j];
if (SCSI3ADDR_EQ(sd[i].scsi3addr,
csd->scsi3addr)) {
if (device_is_the_same(&sd[i], csd))
}
if (!found) {
changes++;
- if (cciss_scsi_add_entry(ctlr, hostno, &sd[i],
+ if (cciss_scsi_add_entry(h, hostno, &sd[i],
added, &nadded) != 0)
break;
} else if (found == 1) {
/* should never happen... */
changes++;
- printk(KERN_WARNING "cciss%d: device "
- "unexpectedly changed\n", ctlr);
+ dev_warn(&h->pdev->dev,
+ "device unexpectedly changed\n");
/* but if it does happen, we just ignore that device */
}
}
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ CPQ_TAPE_UNLOCK(h, flags);
/* Don't notify scsi mid layer of any changes the first time through */
/* (or if there are no changes) scsi_scan_host will do it later the */
/* We don't expect to get here. */
/* future cmds to this device will get selection */
/* timeout as if the device was gone. */
- printk(KERN_WARNING "cciss%d: didn't find "
+ dev_warn(&h->pdev->dev, "didn't find "
"c%db%dt%dl%d\n for removal.",
- ctlr, hostno, removed[i].bus,
+ hostno, removed[i].bus,
removed[i].target, removed[i].lun);
}
}
added[i].target, added[i].lun);
if (rc == 0)
continue;
- printk(KERN_WARNING "cciss%d: scsi_add_device "
+ dev_warn(&h->pdev->dev, "scsi_add_device "
"c%db%dt%dl%d failed, device not added.\n",
- ctlr, hostno,
- added[i].bus, added[i].target, added[i].lun);
+ hostno, added[i].bus, added[i].target, added[i].lun);
/* now we have to remove it from ccissscsi, */
/* since it didn't get added to scsi mid layer */
- fixup_botched_add(ctlr, added[i].scsi3addr);
+ fixup_botched_add(h, added[i].scsi3addr);
}
free_and_out:
}
static int
-lookup_scsi3addr(int ctlr, int bus, int target, int lun, char *scsi3addr)
+lookup_scsi3addr(ctlr_info_t *h, int bus, int target, int lun, char *scsi3addr)
{
int i;
struct cciss_scsi_dev_t *sd;
unsigned long flags;
- CPQ_TAPE_LOCK(ctlr, flags);
- for (i=0;i<ccissscsi[ctlr].ndevices;i++) {
- sd = &ccissscsi[ctlr].dev[i];
+ CPQ_TAPE_LOCK(h, flags);
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
+ sd = &ccissscsi[h->ctlr].dev[i];
if (sd->bus == bus &&
sd->target == target &&
sd->lun == lun) {
memcpy(scsi3addr, &sd->scsi3addr[0], 8);
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ CPQ_TAPE_UNLOCK(h, flags);
return 0;
}
}
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ CPQ_TAPE_UNLOCK(h, flags);
return -1;
}
static void
-cciss_scsi_setup(int cntl_num)
+cciss_scsi_setup(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t * shba;
- ccissscsi[cntl_num].ndevices = 0;
+ ccissscsi[h->ctlr].ndevices = 0;
shba = (struct cciss_scsi_adapter_data_t *)
kmalloc(sizeof(*shba), GFP_KERNEL);
if (shba == NULL)
shba->scsi_host = NULL;
spin_lock_init(&shba->lock);
shba->registered = 0;
- if (scsi_cmd_stack_setup(cntl_num, shba) != 0) {
+ if (scsi_cmd_stack_setup(h, shba) != 0) {
kfree(shba);
shba = NULL;
}
- hba[cntl_num]->scsi_ctlr = shba;
+ h->scsi_ctlr = shba;
return;
}
-static void
-complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag)
+static void complete_scsi_command(CommandList_struct *c, int timeout,
+ __u32 tag)
{
struct scsi_cmnd *cmd;
- ctlr_info_t *ctlr;
+ ctlr_info_t *h;
ErrorInfo_struct *ei;
- ei = cp->err_info;
+ ei = c->err_info;
/* First, see if it was a message rather than a command */
- if (cp->Request.Type.Type == TYPE_MSG) {
- cp->cmd_type = CMD_MSG_DONE;
+ if (c->Request.Type.Type == TYPE_MSG) {
+ c->cmd_type = CMD_MSG_DONE;
return;
}
- cmd = (struct scsi_cmnd *) cp->scsi_cmd;
- ctlr = hba[cp->ctlr];
+ cmd = (struct scsi_cmnd *) c->scsi_cmd;
+ h = hba[c->ctlr];
scsi_dma_unmap(cmd);
- if (cp->Header.SGTotal > ctlr->max_cmd_sgentries)
- cciss_unmap_sg_chain_block(ctlr, cp);
+ if (c->Header.SGTotal > h->max_cmd_sgentries)
+ cciss_unmap_sg_chain_block(h, c);
cmd->result = (DID_OK << 16); /* host byte */
cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
{
#if 0
printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status = %x\n",
- cp,
- ei->ScsiStatus);
+ "has SCSI Status = %x\n",
+ c, ei->ScsiStatus);
#endif
cmd->result |= (ei->ScsiStatus << 1);
}
case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
break;
case CMD_DATA_OVERRUN:
- printk(KERN_WARNING "cciss: cp %p has"
+ dev_warn(&h->pdev->dev, "%p has"
" completed with data overrun "
- "reported\n", cp);
+ "reported\n", c);
break;
case CMD_INVALID: {
- /* print_bytes(cp, sizeof(*cp), 1, 0);
- print_cmd(cp); */
+ /* print_bytes(c, sizeof(*c), 1, 0);
+ print_cmd(c); */
/* We get CMD_INVALID if you address a non-existent tape drive instead
of a selection timeout (no response). You will see this if you yank
out a tape drive, then try to access it. This is kind of a shame
}
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cp %p has "
- "protocol error \n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p has protocol error\n", c);
break;
case CMD_HARDWARE_ERR:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p had "
- " hardware error\n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p had hardware error\n", c);
break;
case CMD_CONNECTION_LOST:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p had "
- "connection lost\n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p had connection lost\n", c);
break;
case CMD_ABORTED:
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "cciss: cp %p was "
- "aborted\n", cp);
+ dev_warn(&h->pdev->dev, "%p was aborted\n", c);
break;
case CMD_ABORT_FAILED:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p reports "
- "abort failed\n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p reports abort failed\n", c);
break;
case CMD_UNSOLICITED_ABORT:
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "cciss: cp %p aborted "
- "do to an unsolicited abort\n", cp);
+ dev_warn(&h->pdev->dev, "%p aborted do to an "
+ "unsolicited abort\n", c);
break;
case CMD_TIMEOUT:
cmd->result = DID_TIME_OUT << 16;
- printk(KERN_WARNING "cciss: cp %p timedout\n",
- cp);
+ dev_warn(&h->pdev->dev, "%p timedout\n", c);
break;
default:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p returned "
- "unknown status %x\n", cp,
+ dev_warn(&h->pdev->dev,
+ "%p returned unknown status %x\n", c,
ei->CommandStatus);
}
}
- // printk("c:%p:c%db%dt%dl%d ", cmd, ctlr->ctlr, cmd->channel,
- // cmd->target, cmd->lun);
cmd->scsi_done(cmd);
- scsi_cmd_free(ctlr, cp);
+ scsi_cmd_free(h, c);
}
static int
-cciss_scsi_detect(int ctlr)
+cciss_scsi_detect(ctlr_info_t *h)
{
struct Scsi_Host *sh;
int error;
sh->io_port = 0; // good enough? FIXME,
sh->n_io_port = 0; // I don't think we use these two...
sh->this_id = SELF_SCSI_ID;
- sh->sg_tablesize = hba[ctlr]->maxsgentries;
+ sh->sg_tablesize = h->maxsgentries;
sh->max_cmd_len = MAX_COMMAND_SIZE;
((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->scsi_host = sh;
- sh->hostdata[0] = (unsigned long) hba[ctlr];
- sh->irq = hba[ctlr]->intr[SIMPLE_MODE_INT];
+ h->scsi_ctlr)->scsi_host = sh;
+ sh->hostdata[0] = (unsigned long) h;
+ sh->irq = h->intr[SIMPLE_MODE_INT];
sh->unique_id = sh->irq;
- error = scsi_add_host(sh, &hba[ctlr]->pdev->dev);
+ error = scsi_add_host(sh, &h->pdev->dev);
if (error)
goto fail_host_put;
scsi_scan_host(sh);
static void
cciss_unmap_one(struct pci_dev *pdev,
- CommandList_struct *cp,
+ CommandList_struct *c,
size_t buflen,
int data_direction)
{
u64bit addr64;
- addr64.val32.lower = cp->SG[0].Addr.lower;
- addr64.val32.upper = cp->SG[0].Addr.upper;
+ addr64.val32.lower = c->SG[0].Addr.lower;
+ addr64.val32.upper = c->SG[0].Addr.upper;
pci_unmap_single(pdev, (dma_addr_t) addr64.val, buflen, data_direction);
}
static void
cciss_map_one(struct pci_dev *pdev,
- CommandList_struct *cp,
+ CommandList_struct *c,
unsigned char *buf,
size_t buflen,
int data_direction)
__u64 addr64;
addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction);
- cp->SG[0].Addr.lower =
+ c->SG[0].Addr.lower =
(__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
- cp->SG[0].Addr.upper =
+ c->SG[0].Addr.upper =
(__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
- cp->SG[0].Len = buflen;
- cp->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */
- cp->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */
+ c->SG[0].Len = buflen;
+ c->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */
+ c->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */
}
static int
-cciss_scsi_do_simple_cmd(ctlr_info_t *c,
- CommandList_struct *cp,
+cciss_scsi_do_simple_cmd(ctlr_info_t *h,
+ CommandList_struct *c,
unsigned char *scsi3addr,
unsigned char *cdb,
unsigned char cdblen,
unsigned char *buf, int bufsize,
int direction)
{
- unsigned long flags;
DECLARE_COMPLETION_ONSTACK(wait);
- cp->cmd_type = CMD_IOCTL_PEND; // treat this like an ioctl
- cp->scsi_cmd = NULL;
- cp->Header.ReplyQueue = 0; // unused in simple mode
- memcpy(&cp->Header.LUN, scsi3addr, sizeof(cp->Header.LUN));
- cp->Header.Tag.lower = cp->busaddr; // Use k. address of cmd as tag
+ c->cmd_type = CMD_IOCTL_PEND; /* treat this like an ioctl */
+ c->scsi_cmd = NULL;
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
+ memcpy(&c->Header.LUN, scsi3addr, sizeof(c->Header.LUN));
+ c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
// Fill in the request block...
/* printk("Using scsi3addr 0x%02x%0x2%0x2%0x2%0x2%0x2%0x2%0x2\n",
scsi3addr[0], scsi3addr[1], scsi3addr[2], scsi3addr[3],
scsi3addr[4], scsi3addr[5], scsi3addr[6], scsi3addr[7]); */
- memset(cp->Request.CDB, 0, sizeof(cp->Request.CDB));
- memcpy(cp->Request.CDB, cdb, cdblen);
- cp->Request.Timeout = 0;
- cp->Request.CDBLen = cdblen;
- cp->Request.Type.Type = TYPE_CMD;
- cp->Request.Type.Attribute = ATTR_SIMPLE;
- cp->Request.Type.Direction = direction;
+ memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
+ memcpy(c->Request.CDB, cdb, cdblen);
+ c->Request.Timeout = 0;
+ c->Request.CDBLen = cdblen;
+ c->Request.Type.Type = TYPE_CMD;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = direction;
/* Fill in the SG list and do dma mapping */
- cciss_map_one(c->pdev, cp, (unsigned char *) buf,
+ cciss_map_one(h->pdev, c, (unsigned char *) buf,
bufsize, DMA_FROM_DEVICE);
- cp->waiting = &wait;
-
- /* Put the request on the tail of the request queue */
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- addQ(&c->reqQ, cp);
- c->Qdepth++;
- start_io(c);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
-
+ c->waiting = &wait;
+ enqueue_cmd_and_start_io(h, c);
wait_for_completion(&wait);
/* undo the dma mapping */
- cciss_unmap_one(c->pdev, cp, bufsize, DMA_FROM_DEVICE);
+ cciss_unmap_one(h->pdev, c, bufsize, DMA_FROM_DEVICE);
return(0);
}
static void
-cciss_scsi_interpret_error(CommandList_struct *cp)
+cciss_scsi_interpret_error(ctlr_info_t *h, CommandList_struct *c)
{
ErrorInfo_struct *ei;
- ei = cp->err_info;
+ ei = c->err_info;
switch(ei->CommandStatus)
{
case CMD_TARGET_STATUS:
- printk(KERN_WARNING "cciss: cmd %p has "
- "completed with errors\n", cp);
- printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status = %x\n",
- cp,
- ei->ScsiStatus);
+ dev_warn(&h->pdev->dev,
+ "cmd %p has completed with errors\n", c);
+ dev_warn(&h->pdev->dev,
+ "cmd %p has SCSI Status = %x\n",
+ c, ei->ScsiStatus);
if (ei->ScsiStatus == 0)
- printk(KERN_WARNING
- "cciss:SCSI status is abnormally zero. "
+ dev_warn(&h->pdev->dev,
+ "SCSI status is abnormally zero. "
"(probably indicates selection timeout "
"reported incorrectly due to a known "
"firmware bug, circa July, 2001.)\n");
break;
case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
- printk("UNDERRUN\n");
+ dev_info(&h->pdev->dev, "UNDERRUN\n");
break;
case CMD_DATA_OVERRUN:
- printk(KERN_WARNING "cciss: cp %p has"
+ dev_warn(&h->pdev->dev, "%p has"
" completed with data overrun "
- "reported\n", cp);
+ "reported\n", c);
break;
case CMD_INVALID: {
/* controller unfortunately reports SCSI passthru's */
/* to non-existent targets as invalid commands. */
- printk(KERN_WARNING "cciss: cp %p is "
- "reported invalid (probably means "
- "target device no longer present)\n",
- cp);
- /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0);
- print_cmd(cp); */
+ dev_warn(&h->pdev->dev,
+ "%p is reported invalid (probably means "
+ "target device no longer present)\n", c);
+ /* print_bytes((unsigned char *) c, sizeof(*c), 1, 0);
+ print_cmd(c); */
}
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cp %p has "
- "protocol error \n", cp);
+ dev_warn(&h->pdev->dev, "%p has protocol error\n", c);
break;
case CMD_HARDWARE_ERR:
/* cmd->result = DID_ERROR << 16; */
- printk(KERN_WARNING "cciss: cp %p had "
- " hardware error\n", cp);
+ dev_warn(&h->pdev->dev, "%p had hardware error\n", c);
break;
case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cp %p had "
- "connection lost\n", cp);
+ dev_warn(&h->pdev->dev, "%p had connection lost\n", c);
break;
case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cp %p was "
- "aborted\n", cp);
+ dev_warn(&h->pdev->dev, "%p was aborted\n", c);
break;
case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cp %p reports "
- "abort failed\n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p reports abort failed\n", c);
break;
case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING "cciss: cp %p aborted "
- "do to an unsolicited abort\n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p aborted do to an unsolicited abort\n", c);
break;
case CMD_TIMEOUT:
- printk(KERN_WARNING "cciss: cp %p timedout\n",
- cp);
+ dev_warn(&h->pdev->dev, "%p timedout\n", c);
break;
default:
- printk(KERN_WARNING "cciss: cp %p returned "
- "unknown status %x\n", cp,
- ei->CommandStatus);
+ dev_warn(&h->pdev->dev,
+ "%p returned unknown status %x\n",
+ c, ei->CommandStatus);
}
}
static int
-cciss_scsi_do_inquiry(ctlr_info_t *c, unsigned char *scsi3addr,
+cciss_scsi_do_inquiry(ctlr_info_t *h, unsigned char *scsi3addr,
unsigned char page, unsigned char *buf,
unsigned char bufsize)
{
int rc;
- CommandList_struct *cp;
+ CommandList_struct *c;
char cdb[6];
ErrorInfo_struct *ei;
unsigned long flags;
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- cp = scsi_cmd_alloc(c);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
+ c = scsi_cmd_alloc(h);
+ spin_unlock_irqrestore(&h->lock, flags);
- if (cp == NULL) { /* trouble... */
+ if (c == NULL) { /* trouble... */
printk("cmd_alloc returned NULL!\n");
return -1;
}
- ei = cp->err_info;
+ ei = c->err_info;
cdb[0] = CISS_INQUIRY;
cdb[1] = (page != 0);
cdb[3] = 0;
cdb[4] = bufsize;
cdb[5] = 0;
- rc = cciss_scsi_do_simple_cmd(c, cp, scsi3addr, cdb,
+ rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr, cdb,
6, buf, bufsize, XFER_READ);
if (rc != 0) return rc; /* something went wrong */
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(cp);
+ cciss_scsi_interpret_error(h, c);
rc = -1;
}
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- scsi_cmd_free(c, cp);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
+ scsi_cmd_free(h, c);
+ spin_unlock_irqrestore(&h->lock, flags);
return rc;
}
/* Get the device id from inquiry page 0x83 */
-static int cciss_scsi_get_device_id(ctlr_info_t *c, unsigned char *scsi3addr,
+static int cciss_scsi_get_device_id(ctlr_info_t *h, unsigned char *scsi3addr,
unsigned char *device_id, int buflen)
{
int rc;
buf = kzalloc(64, GFP_KERNEL);
if (!buf)
return -1;
- rc = cciss_scsi_do_inquiry(c, scsi3addr, 0x83, buf, 64);
+ rc = cciss_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64);
if (rc == 0)
memcpy(device_id, &buf[8], buflen);
kfree(buf);
}
static int
-cciss_scsi_do_report_phys_luns(ctlr_info_t *c,
+cciss_scsi_do_report_phys_luns(ctlr_info_t *h,
ReportLunData_struct *buf, int bufsize)
{
int rc;
- CommandList_struct *cp;
+ CommandList_struct *c;
unsigned char cdb[12];
unsigned char scsi3addr[8];
ErrorInfo_struct *ei;
unsigned long flags;
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- cp = scsi_cmd_alloc(c);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
- if (cp == NULL) { /* trouble... */
+ spin_lock_irqsave(&h->lock, flags);
+ c = scsi_cmd_alloc(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+ if (c == NULL) { /* trouble... */
printk("cmd_alloc returned NULL!\n");
return -1;
}
cdb[10] = 0;
cdb[11] = 0;
- rc = cciss_scsi_do_simple_cmd(c, cp, scsi3addr,
+ rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr,
cdb, 12,
(unsigned char *) buf,
bufsize, XFER_READ);
if (rc != 0) return rc; /* something went wrong */
- ei = cp->err_info;
+ ei = c->err_info;
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(cp);
+ cciss_scsi_interpret_error(h, c);
rc = -1;
}
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- scsi_cmd_free(c, cp);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
+ scsi_cmd_free(h, c);
+ spin_unlock_irqrestore(&h->lock, flags);
return rc;
}
static void
-cciss_update_non_disk_devices(int cntl_num, int hostno)
+cciss_update_non_disk_devices(ctlr_info_t *h, int hostno)
{
/* the idea here is we could get notified from /proc
that some devices have changed, so we do a report
ReportLunData_struct *ld_buff;
unsigned char *inq_buff;
unsigned char scsi3addr[8];
- ctlr_info_t *c;
__u32 num_luns=0;
unsigned char *ch;
struct cciss_scsi_dev_t *currentsd, *this_device;
int reportlunsize = sizeof(*ld_buff) + CISS_MAX_PHYS_LUN * 8;
int i;
- c = (ctlr_info_t *) hba[cntl_num];
ld_buff = kzalloc(reportlunsize, GFP_KERNEL);
inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
currentsd = kzalloc(sizeof(*currentsd) *
goto out;
}
this_device = ¤tsd[CCISS_MAX_SCSI_DEVS_PER_HBA];
- if (cciss_scsi_do_report_phys_luns(c, ld_buff, reportlunsize) == 0) {
+ if (cciss_scsi_do_report_phys_luns(h, ld_buff, reportlunsize) == 0) {
ch = &ld_buff->LUNListLength[0];
num_luns = ((ch[0]<<24) | (ch[1]<<16) | (ch[2]<<8) | ch[3]) / 8;
if (num_luns > CISS_MAX_PHYS_LUN) {
memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE);
memcpy(&scsi3addr[0], &ld_buff->LUN[i][0], 8);
- if (cciss_scsi_do_inquiry(hba[cntl_num], scsi3addr, 0, inq_buff,
+ if (cciss_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
(unsigned char) OBDR_TAPE_INQ_SIZE) != 0)
/* Inquiry failed (msg printed already) */
continue; /* so we will skip this device. */
sizeof(this_device->revision));
memset(this_device->device_id, 0,
sizeof(this_device->device_id));
- cciss_scsi_get_device_id(hba[cntl_num], scsi3addr,
+ cciss_scsi_get_device_id(h, scsi3addr,
this_device->device_id, sizeof(this_device->device_id));
switch (this_device->devtype)
case 0x08: /* medium changer */
if (ncurrent >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
printk(KERN_INFO "cciss%d: %s ignored, "
- "too many devices.\n", cntl_num,
+ "too many devices.\n", h->ctlr,
scsi_device_type(this_device->devtype));
break;
}
}
}
- adjust_cciss_scsi_table(cntl_num, hostno, currentsd, ncurrent);
+ adjust_cciss_scsi_table(h, hostno, currentsd, ncurrent);
out:
kfree(inq_buff);
kfree(ld_buff);
}
static int
-cciss_scsi_user_command(int ctlr, int hostno, char *buffer, int length)
+cciss_scsi_user_command(ctlr_info_t *h, int hostno, char *buffer, int length)
{
int arg_len;
if ((arg_len = is_keyword(buffer, length, "rescan")) != 0)
- cciss_update_non_disk_devices(ctlr, hostno);
+ cciss_update_non_disk_devices(h, hostno);
else
return -EINVAL;
return length;
{
int buflen, datalen;
- ctlr_info_t *ci;
+ ctlr_info_t *h;
int i;
- int cntl_num;
-
- ci = (ctlr_info_t *) sh->hostdata[0];
- if (ci == NULL) /* This really shouldn't ever happen. */
+ h = (ctlr_info_t *) sh->hostdata[0];
+ if (h == NULL) /* This really shouldn't ever happen. */
return -EINVAL;
- cntl_num = ci->ctlr; /* Get our index into the hba[] array */
-
if (func == 0) { /* User is reading from /proc/scsi/ciss*?/?* */
buflen = sprintf(buffer, "cciss%d: SCSI host: %d\n",
- cntl_num, sh->host_no);
+ h->ctlr, sh->host_no);
/* this information is needed by apps to know which cciss
device corresponds to which scsi host number without
this info is for an app to be able to use to know how to
get them back in sync. */
- for (i=0;i<ccissscsi[cntl_num].ndevices;i++) {
- struct cciss_scsi_dev_t *sd = &ccissscsi[cntl_num].dev[i];
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
+ struct cciss_scsi_dev_t *sd =
+ &ccissscsi[h->ctlr].dev[i];
buflen += sprintf(&buffer[buflen], "c%db%dt%dl%d %02d "
"0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
sh->host_no, sd->bus, sd->target, sd->lun,
*start = buffer + offset;
return(datalen);
} else /* User is writing to /proc/scsi/cciss*?/?* ... */
- return cciss_scsi_user_command(cntl_num, sh->host_no,
+ return cciss_scsi_user_command(h, sh->host_no,
buffer, length);
}
/* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
dma mapping and fills in the scatter gather entries of the
- cciss command, cp. */
+ cciss command, c. */
-static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *cp,
+static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c,
struct scsi_cmnd *cmd)
{
unsigned int len;
chained = 0;
sg_index = 0;
- curr_sg = cp->SG;
+ curr_sg = c->SG;
request_nsgs = scsi_dma_map(cmd);
if (request_nsgs) {
scsi_for_each_sg(cmd, sg, request_nsgs, i) {
!chained && request_nsgs - i > 1) {
chained = 1;
sg_index = 0;
- curr_sg = sa->cmd_sg_list[cp->cmdindex];
+ curr_sg = sa->cmd_sg_list[c->cmdindex];
}
addr64 = (__u64) sg_dma_address(sg);
len = sg_dma_len(sg);
++sg_index;
}
if (chained)
- cciss_map_sg_chain_block(h, cp,
- sa->cmd_sg_list[cp->cmdindex],
+ cciss_map_sg_chain_block(h, c,
+ sa->cmd_sg_list[c->cmdindex],
(request_nsgs - (h->max_cmd_sgentries - 1)) *
sizeof(SGDescriptor_struct));
}
/* track how many SG entries we are using */
if (request_nsgs > h->maxSG)
h->maxSG = request_nsgs;
- cp->Header.SGTotal = (__u8) request_nsgs + chained;
+ c->Header.SGTotal = (__u8) request_nsgs + chained;
if (request_nsgs > h->max_cmd_sgentries)
- cp->Header.SGList = h->max_cmd_sgentries;
+ c->Header.SGList = h->max_cmd_sgentries;
else
- cp->Header.SGList = cp->Header.SGTotal;
+ c->Header.SGList = c->Header.SGTotal;
return;
}
static int
cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
{
- ctlr_info_t *c;
- int ctlr, rc;
+ ctlr_info_t *h;
+ int rc;
unsigned char scsi3addr[8];
- CommandList_struct *cp;
+ CommandList_struct *c;
unsigned long flags;
// Get the ptr to our adapter structure (hba[i]) out of cmd->host.
// We violate cmd->host privacy here. (Is there another way?)
- c = (ctlr_info_t *) cmd->device->host->hostdata[0];
- ctlr = c->ctlr;
+ h = (ctlr_info_t *) cmd->device->host->hostdata[0];
- rc = lookup_scsi3addr(ctlr, cmd->device->channel, cmd->device->id,
+ rc = lookup_scsi3addr(h, cmd->device->channel, cmd->device->id,
cmd->device->lun, scsi3addr);
if (rc != 0) {
/* the scsi nexus does not match any that we presented... */
return 0;
}
- /* printk("cciss_queue_command, p=%p, cmd=0x%02x, c%db%dt%dl%d\n",
- cmd, cmd->cmnd[0], ctlr, cmd->channel, cmd->target, cmd->lun);*/
- // printk("q:%p:c%db%dt%dl%d ", cmd, ctlr, cmd->channel,
- // cmd->target, cmd->lun);
-
/* Ok, we have a reasonable scsi nexus, so send the cmd down, and
see what the device thinks of it. */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- cp = scsi_cmd_alloc(c);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- if (cp == NULL) { /* trouble... */
- printk("scsi_cmd_alloc returned NULL!\n");
+ spin_lock_irqsave(&h->lock, flags);
+ c = scsi_cmd_alloc(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+ if (c == NULL) { /* trouble... */
+ dev_warn(&h->pdev->dev, "scsi_cmd_alloc returned NULL!\n");
/* FIXME: next 3 lines are -> BAD! <- */
cmd->result = DID_NO_CONNECT << 16;
done(cmd);
cmd->scsi_done = done; // save this for use by completion code
- // save cp in case we have to abort it
- cmd->host_scribble = (unsigned char *) cp;
+ /* save c in case we have to abort it */
+ cmd->host_scribble = (unsigned char *) c;
- cp->cmd_type = CMD_SCSI;
- cp->scsi_cmd = cmd;
- cp->Header.ReplyQueue = 0; // unused in simple mode
- memcpy(&cp->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
- cp->Header.Tag.lower = cp->busaddr; // Use k. address of cmd as tag
+ c->cmd_type = CMD_SCSI;
+ c->scsi_cmd = cmd;
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
+ memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
+ c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
// Fill in the request block...
- cp->Request.Timeout = 0;
- memset(cp->Request.CDB, 0, sizeof(cp->Request.CDB));
- BUG_ON(cmd->cmd_len > sizeof(cp->Request.CDB));
- cp->Request.CDBLen = cmd->cmd_len;
- memcpy(cp->Request.CDB, cmd->cmnd, cmd->cmd_len);
- cp->Request.Type.Type = TYPE_CMD;
- cp->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Timeout = 0;
+ memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
+ BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB));
+ c->Request.CDBLen = cmd->cmd_len;
+ memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len);
+ c->Request.Type.Type = TYPE_CMD;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
switch(cmd->sc_data_direction)
{
- case DMA_TO_DEVICE: cp->Request.Type.Direction = XFER_WRITE; break;
- case DMA_FROM_DEVICE: cp->Request.Type.Direction = XFER_READ; break;
- case DMA_NONE: cp->Request.Type.Direction = XFER_NONE; break;
+ case DMA_TO_DEVICE:
+ c->Request.Type.Direction = XFER_WRITE;
+ break;
+ case DMA_FROM_DEVICE:
+ c->Request.Type.Direction = XFER_READ;
+ break;
+ case DMA_NONE:
+ c->Request.Type.Direction = XFER_NONE;
+ break;
case DMA_BIDIRECTIONAL:
// This can happen if a buggy application does a scsi passthru
// and sets both inlen and outlen to non-zero. ( see
// ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )
- cp->Request.Type.Direction = XFER_RSVD;
+ c->Request.Type.Direction = XFER_RSVD;
// This is technically wrong, and cciss controllers should
// reject it with CMD_INVALID, which is the most correct
// response, but non-fibre backends appear to let it
break;
default:
- printk("cciss: unknown data direction: %d\n",
+ dev_warn(&h->pdev->dev, "unknown data direction: %d\n",
cmd->sc_data_direction);
BUG();
break;
}
- cciss_scatter_gather(c, cp, cmd);
-
- /* Put the request on the tail of the request queue */
-
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- addQ(&c->reqQ, cp);
- c->Qdepth++;
- start_io(c);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
-
+ cciss_scatter_gather(h, c, cmd);
+ enqueue_cmd_and_start_io(h, c);
/* the cmd'll come back via intr handler in complete_scsi_command() */
return 0;
}
-static void
-cciss_unregister_scsi(int ctlr)
+static void cciss_unregister_scsi(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t *sa;
struct cciss_scsi_cmd_stack_t *stk;
/* we are being forcibly unloaded, and may not refuse. */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- sa = hba[ctlr]->scsi_ctlr;
+ spin_lock_irqsave(&h->lock, flags);
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
/* if we weren't ever actually registered, don't unregister */
if (sa->registered) {
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
scsi_remove_host(sa->scsi_host);
scsi_host_put(sa->scsi_host);
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
}
/* set scsi_host to NULL so our detect routine will
find us on register */
sa->scsi_host = NULL;
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- scsi_cmd_stack_free(ctlr);
+ spin_unlock_irqrestore(&h->lock, flags);
+ scsi_cmd_stack_free(h);
kfree(sa);
}
-static int
-cciss_engage_scsi(int ctlr)
+static int cciss_engage_scsi(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t *sa;
struct cciss_scsi_cmd_stack_t *stk;
unsigned long flags;
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- sa = hba[ctlr]->scsi_ctlr;
+ spin_lock_irqsave(&h->lock, flags);
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
if (sa->registered) {
- printk("cciss%d: SCSI subsystem already engaged.\n", ctlr);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ dev_info(&h->pdev->dev, "SCSI subsystem already engaged.\n");
+ spin_unlock_irqrestore(&h->lock, flags);
return -ENXIO;
}
sa->registered = 1;
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- cciss_update_non_disk_devices(ctlr, -1);
- cciss_scsi_detect(ctlr);
+ spin_unlock_irqrestore(&h->lock, flags);
+ cciss_update_non_disk_devices(h, -1);
+ cciss_scsi_detect(h);
return 0;
}
static void
-cciss_seq_tape_report(struct seq_file *seq, int ctlr)
+cciss_seq_tape_report(struct seq_file *seq, ctlr_info_t *h)
{
unsigned long flags;
- CPQ_TAPE_LOCK(ctlr, flags);
+ CPQ_TAPE_LOCK(h, flags);
seq_printf(seq,
"Sequential access devices: %d\n\n",
- ccissscsi[ctlr].ndevices);
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ ccissscsi[h->ctlr].ndevices);
+ CPQ_TAPE_UNLOCK(h, flags);
}
static int wait_for_device_to_become_ready(ctlr_info_t *h,
int waittime = HZ;
CommandList_struct *c;
- c = cmd_alloc(h, 1);
+ c = cmd_alloc(h);
if (!c) {
- printk(KERN_WARNING "cciss%d: out of memory in "
- "wait_for_device_to_become_ready.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "out of memory in "
+ "wait_for_device_to_become_ready.\n");
return IO_ERROR;
}
waittime = waittime * 2;
/* Send the Test Unit Ready */
- rc = fill_cmd(c, TEST_UNIT_READY, h->ctlr, NULL, 0, 0,
+ rc = fill_cmd(h, c, TEST_UNIT_READY, NULL, 0, 0,
lunaddr, TYPE_CMD);
if (rc == 0)
rc = sendcmd_withirq_core(h, c, 0);
}
}
retry_tur:
- printk(KERN_WARNING "cciss%d: Waiting %d secs "
+ dev_warn(&h->pdev->dev, "Waiting %d secs "
"for device to become ready.\n",
- h->ctlr, waittime / HZ);
+ waittime / HZ);
rc = 1; /* device not ready. */
}
if (rc)
- printk("cciss%d: giving up on device.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "giving up on device.\n");
else
- printk(KERN_WARNING "cciss%d: device is ready.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "device is ready.\n");
- cmd_free(h, c, 1);
+ cmd_free(h, c);
return rc;
}
int rc;
CommandList_struct *cmd_in_trouble;
unsigned char lunaddr[8];
- ctlr_info_t *c;
- int ctlr;
+ ctlr_info_t *h;
/* find the controller to which the command to be aborted was sent */
- c = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
- if (c == NULL) /* paranoia */
+ h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
+ if (h == NULL) /* paranoia */
return FAILED;
- ctlr = c->ctlr;
- printk(KERN_WARNING "cciss%d: resetting tape drive or medium changer.\n", ctlr);
+ dev_warn(&h->pdev->dev, "resetting tape drive or medium changer.\n");
/* find the command that's giving us trouble */
cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
if (cmd_in_trouble == NULL) /* paranoia */
return FAILED;
memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8);
/* send a reset to the SCSI LUN which the command was sent to */
- rc = sendcmd_withirq(CCISS_RESET_MSG, ctlr, NULL, 0, 0, lunaddr,
+ rc = sendcmd_withirq(h, CCISS_RESET_MSG, NULL, 0, 0, lunaddr,
TYPE_MSG);
- if (rc == 0 && wait_for_device_to_become_ready(c, lunaddr) == 0)
+ if (rc == 0 && wait_for_device_to_become_ready(h, lunaddr) == 0)
return SUCCESS;
- printk(KERN_WARNING "cciss%d: resetting device failed.\n", ctlr);
+ dev_warn(&h->pdev->dev, "resetting device failed.\n");
return FAILED;
}
int rc;
CommandList_struct *cmd_to_abort;
unsigned char lunaddr[8];
- ctlr_info_t *c;
- int ctlr;
+ ctlr_info_t *h;
/* find the controller to which the command to be aborted was sent */
- c = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
- if (c == NULL) /* paranoia */
+ h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
+ if (h == NULL) /* paranoia */
return FAILED;
- ctlr = c->ctlr;
- printk(KERN_WARNING "cciss%d: aborting tardy SCSI cmd\n", ctlr);
+ dev_warn(&h->pdev->dev, "aborting tardy SCSI cmd\n");
/* find the command to be aborted */
cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble;
if (cmd_to_abort == NULL) /* paranoia */
return FAILED;
memcpy(lunaddr, &cmd_to_abort->Header.LUN.LunAddrBytes[0], 8);
- rc = sendcmd_withirq(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag,
+ rc = sendcmd_withirq(h, CCISS_ABORT_MSG, &cmd_to_abort->Header.Tag,
0, 0, lunaddr, TYPE_MSG);
if (rc == 0)
return SUCCESS;
#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/hdreg.h>
+#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h>
#include <linux/genhd.h>
unsigned int blkcnt,
unsigned int log_unit );
-static int ida_open(struct block_device *bdev, fmode_t mode);
+static int ida_unlocked_open(struct block_device *bdev, fmode_t mode);
static int ida_release(struct gendisk *disk, fmode_t mode);
static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg);
static int ida_getgeo(struct block_device *bdev, struct hd_geometry *geo);
static const struct block_device_operations ida_fops = {
.owner = THIS_MODULE,
- .open = ida_open,
+ .open = ida_unlocked_open,
.release = ida_release,
- .locked_ioctl = ida_ioctl,
+ .ioctl = ida_ioctl,
.getgeo = ida_getgeo,
.revalidate_disk= ida_revalidate,
};
return 0;
}
+static int ida_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = ida_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
/*
* Close. Sync first.
*/
static int ida_release(struct gendisk *disk, fmode_t mode)
{
- ctlr_info_t *host = get_host(disk);
+ ctlr_info_t *host;
+
+ lock_kernel();
+ host = get_host(disk);
host->usage_count--;
+ unlock_kernel();
+
return 0;
}
* ida_ioctl does some miscellaneous stuff like reporting drive geometry,
* setting readahead and submitting commands from userspace to the controller.
*/
-static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
+static int ida_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
{
drv_info_t *drv = get_drv(bdev->bd_disk);
ctlr_info_t *host = get_host(bdev->bd_disk);
return error;
case IDAGETCTLRSIG:
if (!arg) return -EINVAL;
- put_user(host->ctlr_sig, (int __user *)arg);
+ if (put_user(host->ctlr_sig, (int __user *)arg))
+ return -EFAULT;
return 0;
case IDAREVALIDATEVOLS:
if (MINOR(bdev->bd_dev) != 0)
return revalidate_allvol(host);
case IDADRIVERVERSION:
if (!arg) return -EINVAL;
- put_user(DRIVER_VERSION, (unsigned long __user *)arg);
+ if (put_user(DRIVER_VERSION, (unsigned long __user *)arg))
+ return -EFAULT;
return 0;
case IDAGETPCIINFO:
{
}
}
+
+static int ida_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = ida_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
/*
* ida_ctlr_ioctl is for passing commands to the controller from userspace.
* The command block (io) has already been copied to kernel space for us,
/* Pre submit processing */
switch(io->cmd) {
case PASSTHRU_A:
- p = kmalloc(io->sg[0].size, GFP_KERNEL);
- if (!p)
- {
- error = -ENOMEM;
- cmd_free(h, c, 0);
- return(error);
- }
- if (copy_from_user(p, io->sg[0].addr, io->sg[0].size)) {
- kfree(p);
- cmd_free(h, c, 0);
- return -EFAULT;
+ p = memdup_user(io->sg[0].addr, io->sg[0].size);
+ if (IS_ERR(p)) {
+ error = PTR_ERR(p);
+ cmd_free(h, c, 0);
+ return error;
}
c->req.hdr.blk = pci_map_single(h->pci_dev, &(io->c),
sizeof(ida_ioctl_t),
case DIAG_PASS_THRU:
case COLLECT_BUFFER:
case WRITE_FLASH_ROM:
- p = kmalloc(io->sg[0].size, GFP_KERNEL);
- if (!p)
- {
- error = -ENOMEM;
- cmd_free(h, c, 0);
- return(error);
+ p = memdup_user(io->sg[0].addr, io->sg[0].size);
+ if (IS_ERR(p)) {
+ error = PTR_ERR(p);
+ cmd_free(h, c, 0);
+ return error;
}
- if (copy_from_user(p, io->sg[0].addr, io->sg[0].size)) {
- kfree(p);
- cmd_free(h, c, 0);
- return -EFAULT;
- }
c->req.sg[0].size = io->sg[0].size;
c->req.sg[0].addr = pci_map_single(h->pci_dev, p,
c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL);
md_io.error = 0;
if ((rw & WRITE) && !test_bit(MD_NO_BARRIER, &mdev->flags))
- rw |= (1 << BIO_RW_BARRIER);
- rw |= ((1<<BIO_RW_UNPLUG) | (1<<BIO_RW_SYNCIO));
+ rw |= REQ_HARDBARRIER;
+ rw |= REQ_UNPLUG | REQ_SYNC;
retry:
bio = bio_alloc(GFP_NOIO, 1);
/* check for unsupported barrier op.
* would rather check on EOPNOTSUPP, but that is not reliable.
* don't try again for ANY return value != 0 */
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER) && !ok)) {
+ if (unlikely((bio->bi_rw & REQ_HARDBARRIER) && !ok)) {
/* Try again with no barrier */
dev_warn(DEV, "Barriers not supported on meta data device - disabling\n");
set_bit(MD_NO_BARRIER, &mdev->flags);
- rw &= ~(1 << BIO_RW_BARRIER);
+ rw &= ~REQ_HARDBARRIER;
bio_put(bio);
goto retry;
}
u32 offset; /* usecs the probe got sent after the reference time point */
} __packed;
-struct delay_probe {
- struct list_head list;
- unsigned int seq_num;
- struct timeval time;
-};
-
/* DCBP: Drbd Compressed Bitmap Packet ... */
static inline enum drbd_bitmap_code
DCBP_get_code(struct p_compressed_bm *p)
unsigned int ko_count;
struct drbd_work resync_work,
unplug_work,
- md_sync_work,
- delay_probe_work;
+ md_sync_work;
struct timer_list resync_timer;
struct timer_list md_sync_timer;
- struct timer_list delay_probe_timer;
/* Used after attach while negotiating new disk state. */
union drbd_state new_state_tmp;
u64 ed_uuid; /* UUID of the exposed data */
struct mutex state_mutex;
char congestion_reason; /* Why we where congested... */
- struct list_head delay_probes; /* protected by peer_seq_lock */
- int data_delay; /* Delay of packets on the data-sock behind meta-sock */
- unsigned int delay_seq; /* To generate sequence numbers of delay probes */
- struct timeval dps_time; /* delay-probes-start-time */
- unsigned int dp_volume_last; /* send_cnt of last delay probe */
- int c_sync_rate; /* current resync rate after delay_probe magic */
};
static inline struct drbd_conf *minor_to_mdev(unsigned int minor)
return ok;
}
-static int drbd_send_delay_probe(struct drbd_conf *mdev, struct drbd_socket *ds)
-{
- struct p_delay_probe dp;
- int offset, ok = 0;
- struct timeval now;
-
- mutex_lock(&ds->mutex);
- if (likely(ds->socket)) {
- do_gettimeofday(&now);
- offset = now.tv_usec - mdev->dps_time.tv_usec +
- (now.tv_sec - mdev->dps_time.tv_sec) * 1000000;
- dp.seq_num = cpu_to_be32(mdev->delay_seq);
- dp.offset = cpu_to_be32(offset);
-
- ok = _drbd_send_cmd(mdev, ds->socket, P_DELAY_PROBE,
- (struct p_header *)&dp, sizeof(dp), 0);
- }
- mutex_unlock(&ds->mutex);
-
- return ok;
-}
-
-static int drbd_send_delay_probes(struct drbd_conf *mdev)
-{
- int ok;
-
- mdev->delay_seq++;
- do_gettimeofday(&mdev->dps_time);
- ok = drbd_send_delay_probe(mdev, &mdev->meta);
- ok = ok && drbd_send_delay_probe(mdev, &mdev->data);
-
- mdev->dp_volume_last = mdev->send_cnt;
- mod_timer(&mdev->delay_probe_timer, jiffies + mdev->sync_conf.dp_interval * HZ / 10);
-
- return ok;
-}
-
/* called on sndtimeo
* returns FALSE if we should retry,
* TRUE if we think connection is dead
return 1;
}
-static void consider_delay_probes(struct drbd_conf *mdev)
-{
- if (mdev->state.conn != C_SYNC_SOURCE || mdev->agreed_pro_version < 93)
- return;
-
- if (mdev->dp_volume_last + mdev->sync_conf.dp_volume * 2 < mdev->send_cnt)
- drbd_send_delay_probes(mdev);
-}
-
-static int w_delay_probes(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
- if (!cancel && mdev->state.conn == C_SYNC_SOURCE)
- drbd_send_delay_probes(mdev);
-
- return 1;
-}
-
-static void delay_probe_timer_fn(unsigned long data)
-{
- struct drbd_conf *mdev = (struct drbd_conf *) data;
-
- if (list_empty(&mdev->delay_probe_work.list))
- drbd_queue_work(&mdev->data.work, &mdev->delay_probe_work);
-}
-
/* Used to send write requests
* R_PRIMARY -> Peer (P_DATA)
*/
/* NOTE: no need to check if barriers supported here as we would
* not pass the test in make_request_common in that case
*/
- if (bio_rw_flagged(req->master_bio, BIO_RW_BARRIER)) {
+ if (req->master_bio->bi_rw & REQ_HARDBARRIER) {
dev_err(DEV, "ASSERT FAILED would have set DP_HARDBARRIER\n");
/* dp_flags |= DP_HARDBARRIER; */
}
- if (bio_rw_flagged(req->master_bio, BIO_RW_SYNCIO))
+ if (req->master_bio->bi_rw & REQ_SYNC)
dp_flags |= DP_RW_SYNC;
/* for now handle SYNCIO and UNPLUG
* as if they still were one and the same flag */
- if (bio_rw_flagged(req->master_bio, BIO_RW_UNPLUG))
+ if (req->master_bio->bi_rw & REQ_UNPLUG)
dp_flags |= DP_RW_SYNC;
if (mdev->state.conn >= C_SYNC_SOURCE &&
mdev->state.conn <= C_PAUSED_SYNC_T)
drbd_put_data_sock(mdev);
- if (ok)
- consider_delay_probes(mdev);
-
return ok;
}
drbd_put_data_sock(mdev);
- if (ok)
- consider_delay_probes(mdev);
-
return ok;
}
unsigned long flags;
int rv = 0;
+ lock_kernel();
spin_lock_irqsave(&mdev->req_lock, flags);
/* to have a stable mdev->state.role
* and no race with updating open_cnt */
if (!rv)
mdev->open_cnt++;
spin_unlock_irqrestore(&mdev->req_lock, flags);
+ unlock_kernel();
return rv;
}
static int drbd_release(struct gendisk *gd, fmode_t mode)
{
struct drbd_conf *mdev = gd->private_data;
+ lock_kernel();
mdev->open_cnt--;
+ unlock_kernel();
return 0;
}
static void drbd_set_defaults(struct drbd_conf *mdev)
{
- mdev->sync_conf.after = DRBD_AFTER_DEF;
- mdev->sync_conf.rate = DRBD_RATE_DEF;
- mdev->sync_conf.al_extents = DRBD_AL_EXTENTS_DEF;
+ /* This way we get a compile error when sync_conf grows,
+ and we forgot to initialize it here */
+ mdev->sync_conf = (struct syncer_conf) {
+ /* .rate = */ DRBD_RATE_DEF,
+ /* .after = */ DRBD_AFTER_DEF,
+ /* .al_extents = */ DRBD_AL_EXTENTS_DEF,
+ /* .verify_alg = */ {}, 0,
+ /* .cpu_mask = */ {}, 0,
+ /* .csums_alg = */ {}, 0,
+ /* .use_rle = */ 0
+ };
+
+ /* Have to use that way, because the layout differs between
+ big endian and little endian */
mdev->state = (union drbd_state) {
{ .role = R_SECONDARY,
.peer = R_UNKNOWN,
INIT_LIST_HEAD(&mdev->unplug_work.list);
INIT_LIST_HEAD(&mdev->md_sync_work.list);
INIT_LIST_HEAD(&mdev->bm_io_work.w.list);
- INIT_LIST_HEAD(&mdev->delay_probes);
- INIT_LIST_HEAD(&mdev->delay_probe_work.list);
mdev->resync_work.cb = w_resync_inactive;
mdev->unplug_work.cb = w_send_write_hint;
mdev->md_sync_work.cb = w_md_sync;
mdev->bm_io_work.w.cb = w_bitmap_io;
- mdev->delay_probe_work.cb = w_delay_probes;
init_timer(&mdev->resync_timer);
init_timer(&mdev->md_sync_timer);
- init_timer(&mdev->delay_probe_timer);
mdev->resync_timer.function = resync_timer_fn;
mdev->resync_timer.data = (unsigned long) mdev;
mdev->md_sync_timer.function = md_sync_timer_fn;
mdev->md_sync_timer.data = (unsigned long) mdev;
- mdev->delay_probe_timer.function = delay_probe_timer_fn;
- mdev->delay_probe_timer.data = (unsigned long) mdev;
-
init_waitqueue_head(&mdev->misc_wait);
init_waitqueue_head(&mdev->state_wait);
sc.rate = DRBD_RATE_DEF;
sc.after = DRBD_AFTER_DEF;
sc.al_extents = DRBD_AL_EXTENTS_DEF;
- sc.dp_volume = DRBD_DP_VOLUME_DEF;
- sc.dp_interval = DRBD_DP_INTERVAL_DEF;
- sc.throttle_th = DRBD_RS_THROTTLE_TH_DEF;
- sc.hold_off_th = DRBD_RS_HOLD_OFF_TH_DEF;
} else
memcpy(&sc, &mdev->sync_conf, sizeof(struct syncer_conf));
seq_printf(seq, "sync'ed:%3u.%u%% ", res / 10, res % 10);
/* if more than 1 GB display in MB */
if (mdev->rs_total > 0x100000L)
- seq_printf(seq, "(%lu/%lu)M",
+ seq_printf(seq, "(%lu/%lu)M\n\t",
(unsigned long) Bit2KB(rs_left >> 10),
(unsigned long) Bit2KB(mdev->rs_total >> 10));
else
- seq_printf(seq, "(%lu/%lu)K",
+ seq_printf(seq, "(%lu/%lu)K\n\t",
(unsigned long) Bit2KB(rs_left),
(unsigned long) Bit2KB(mdev->rs_total));
- if (mdev->state.conn == C_SYNC_TARGET)
- seq_printf(seq, " queue_delay: %d.%d ms\n\t",
- mdev->data_delay / 1000,
- (mdev->data_delay % 1000) / 100);
- else if (mdev->state.conn == C_SYNC_SOURCE)
- seq_printf(seq, " delay_probe: %u\n\t", mdev->delay_seq);
-
/* see drivers/md/md.c
* We do not want to overflow, so the order of operands and
* the * 100 / 100 trick are important. We do a +1 to be
else
seq_printf(seq, " (%ld)", dbdt);
- if (mdev->state.conn == C_SYNC_TARGET) {
- if (mdev->c_sync_rate > 1000)
- seq_printf(seq, " want: %d,%03d",
- mdev->c_sync_rate / 1000, mdev->c_sync_rate % 1000);
- else
- seq_printf(seq, " want: %d", mdev->c_sync_rate);
- }
-
seq_printf(seq, " K/sec\n");
}
bio->bi_sector = sector;
bio->bi_bdev = mdev->ldev->backing_bdev;
/* we special case some flags in the multi-bio case, see below
- * (BIO_RW_UNPLUG, BIO_RW_BARRIER) */
+ * (REQ_UNPLUG, REQ_HARDBARRIER) */
bio->bi_rw = rw;
bio->bi_private = e;
bio->bi_end_io = drbd_endio_sec;
bios = bios->bi_next;
bio->bi_next = NULL;
- /* strip off BIO_RW_UNPLUG unless it is the last bio */
+ /* strip off REQ_UNPLUG unless it is the last bio */
if (bios)
- bio->bi_rw &= ~(1<<BIO_RW_UNPLUG);
+ bio->bi_rw &= ~REQ_UNPLUG;
drbd_generic_make_request(mdev, fault_type, bio);
- /* strip off BIO_RW_BARRIER,
+ /* strip off REQ_HARDBARRIER,
* unless it is the first or last bio */
if (bios && bios->bi_next)
- bios->bi_rw &= ~(1<<BIO_RW_BARRIER);
+ bios->bi_rw &= ~REQ_HARDBARRIER;
} while (bios);
maybe_kick_lo(mdev);
return 0;
}
/**
- * w_e_reissue() - Worker callback; Resubmit a bio, without BIO_RW_BARRIER set
+ * w_e_reissue() - Worker callback; Resubmit a bio, without REQ_HARDBARRIER set
* @mdev: DRBD device.
* @w: work object.
* @cancel: The connection will be closed anyways (unused in this callback)
(and DE_BARRIER_IN_NEXT_EPOCH_ISSUED in the previous Epoch)
so that we can finish that epoch in drbd_may_finish_epoch().
That is necessary if we already have a long chain of Epochs, before
- we realize that BIO_RW_BARRIER is actually not supported */
+ we realize that REQ_HARDBARRIER is actually not supported */
/* As long as the -ENOTSUPP on the barrier is reported immediately
that will never trigger. If it is reported late, we will just
epoch = list_entry(e->epoch->list.prev, struct drbd_epoch, list);
if (epoch == e->epoch) {
set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
- rw |= (1<<BIO_RW_BARRIER);
+ rw |= REQ_HARDBARRIER;
e->flags |= EE_IS_BARRIER;
} else {
if (atomic_read(&epoch->epoch_size) > 1 ||
!test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) {
set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
- rw |= (1<<BIO_RW_BARRIER);
+ rw |= REQ_HARDBARRIER;
e->flags |= EE_IS_BARRIER;
}
}
dp_flags = be32_to_cpu(p->dp_flags);
if (dp_flags & DP_HARDBARRIER) {
dev_err(DEV, "ASSERT FAILED would have submitted barrier request\n");
- /* rw |= (1<<BIO_RW_BARRIER); */
+ /* rw |= REQ_HARDBARRIER; */
}
if (dp_flags & DP_RW_SYNC)
- rw |= (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG);
+ rw |= REQ_SYNC | REQ_UNPLUG;
if (dp_flags & DP_MAY_SET_IN_SYNC)
e->flags |= EE_MAY_SET_IN_SYNC;
return ok;
}
-static int receive_skip(struct drbd_conf *mdev, struct p_header *h)
+static int receive_skip_(struct drbd_conf *mdev, struct p_header *h, int silent)
{
/* TODO zero copy sink :) */
static char sink[128];
int size, want, r;
- dev_warn(DEV, "skipping unknown optional packet type %d, l: %d!\n",
- h->command, h->length);
+ if (!silent)
+ dev_warn(DEV, "skipping unknown optional packet type %d, l: %d!\n",
+ h->command, h->length);
size = h->length;
while (size > 0) {
return size == 0;
}
-static int receive_UnplugRemote(struct drbd_conf *mdev, struct p_header *h)
-{
- if (mdev->state.disk >= D_INCONSISTENT)
- drbd_kick_lo(mdev);
-
- /* Make sure we've acked all the TCP data associated
- * with the data requests being unplugged */
- drbd_tcp_quickack(mdev->data.socket);
-
- return TRUE;
-}
-
-static void timeval_sub_us(struct timeval* tv, unsigned int us)
+static int receive_skip(struct drbd_conf *mdev, struct p_header *h)
{
- tv->tv_sec -= us / 1000000;
- us = us % 1000000;
- if (tv->tv_usec > us) {
- tv->tv_usec += 1000000;
- tv->tv_sec--;
- }
- tv->tv_usec -= us;
+ return receive_skip_(mdev, h, 0);
}
-static void got_delay_probe(struct drbd_conf *mdev, int from, struct p_delay_probe *p)
+static int receive_skip_silent(struct drbd_conf *mdev, struct p_header *h)
{
- struct delay_probe *dp;
- struct list_head *le;
- struct timeval now;
- int seq_num;
- int offset;
- int data_delay;
-
- seq_num = be32_to_cpu(p->seq_num);
- offset = be32_to_cpu(p->offset);
-
- spin_lock(&mdev->peer_seq_lock);
- if (!list_empty(&mdev->delay_probes)) {
- if (from == USE_DATA_SOCKET)
- le = mdev->delay_probes.next;
- else
- le = mdev->delay_probes.prev;
-
- dp = list_entry(le, struct delay_probe, list);
-
- if (dp->seq_num == seq_num) {
- list_del(le);
- spin_unlock(&mdev->peer_seq_lock);
- do_gettimeofday(&now);
- timeval_sub_us(&now, offset);
- data_delay =
- now.tv_usec - dp->time.tv_usec +
- (now.tv_sec - dp->time.tv_sec) * 1000000;
-
- if (data_delay > 0)
- mdev->data_delay = data_delay;
-
- kfree(dp);
- return;
- }
-
- if (dp->seq_num > seq_num) {
- spin_unlock(&mdev->peer_seq_lock);
- dev_warn(DEV, "Previous allocation failure of struct delay_probe?\n");
- return; /* Do not alloca a struct delay_probe.... */
- }
- }
- spin_unlock(&mdev->peer_seq_lock);
-
- dp = kmalloc(sizeof(struct delay_probe), GFP_NOIO);
- if (!dp) {
- dev_warn(DEV, "Failed to allocate a struct delay_probe, do not worry.\n");
- return;
- }
-
- dp->seq_num = seq_num;
- do_gettimeofday(&dp->time);
- timeval_sub_us(&dp->time, offset);
-
- spin_lock(&mdev->peer_seq_lock);
- if (from == USE_DATA_SOCKET)
- list_add(&dp->list, &mdev->delay_probes);
- else
- list_add_tail(&dp->list, &mdev->delay_probes);
- spin_unlock(&mdev->peer_seq_lock);
+ return receive_skip_(mdev, h, 1);
}
-static int receive_delay_probe(struct drbd_conf *mdev, struct p_header *h)
+static int receive_UnplugRemote(struct drbd_conf *mdev, struct p_header *h)
{
- struct p_delay_probe *p = (struct p_delay_probe *)h;
+ if (mdev->state.disk >= D_INCONSISTENT)
+ drbd_kick_lo(mdev);
- ERR_IF(h->length != (sizeof(*p)-sizeof(*h))) return FALSE;
- if (drbd_recv(mdev, h->payload, h->length) != h->length)
- return FALSE;
+ /* Make sure we've acked all the TCP data associated
+ * with the data requests being unplugged */
+ drbd_tcp_quickack(mdev->data.socket);
- got_delay_probe(mdev, USE_DATA_SOCKET, p);
return TRUE;
}
[P_OV_REQUEST] = receive_DataRequest,
[P_OV_REPLY] = receive_DataRequest,
[P_CSUM_RS_REQUEST] = receive_DataRequest,
- [P_DELAY_PROBE] = receive_delay_probe,
+ [P_DELAY_PROBE] = receive_skip_silent,
/* anything missing from this table is in
* the asender_tbl, see get_asender_cmd */
[P_MAX_CMD] = NULL,
return TRUE;
}
-static int got_delay_probe_m(struct drbd_conf *mdev, struct p_header *h)
+static int got_something_to_ignore_m(struct drbd_conf *mdev, struct p_header *h)
{
- struct p_delay_probe *p = (struct p_delay_probe *)h;
-
- got_delay_probe(mdev, USE_META_SOCKET, p);
+ /* IGNORE */
return TRUE;
}
[P_BARRIER_ACK] = { sizeof(struct p_barrier_ack), got_BarrierAck },
[P_STATE_CHG_REPLY] = { sizeof(struct p_req_state_reply), got_RqSReply },
[P_RS_IS_IN_SYNC] = { sizeof(struct p_block_ack), got_IsInSync },
- [P_DELAY_PROBE] = { sizeof(struct p_delay_probe), got_delay_probe_m },
+ [P_DELAY_PROBE] = { sizeof(struct p_delay_probe), got_something_to_ignore_m },
[P_MAX_CMD] = { 0, NULL },
};
if (cmd > P_MAX_CMD || asender_tbl[cmd].process == NULL)
* because of those XXX, this is not yet enabled,
* i.e. in drbd_init_set_defaults we set the NO_BARRIER_SUPP bit.
*/
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER) && test_bit(NO_BARRIER_SUPP, &mdev->flags))) {
+ if (unlikely(bio->bi_rw & REQ_HARDBARRIER) && test_bit(NO_BARRIER_SUPP, &mdev->flags)) {
/* dev_warn(DEV, "Rejecting barrier request as underlying device does not support\n"); */
bio_endio(bio, -EOPNOTSUPP);
return 0;
drbd_queue_work(&mdev->data.work, &mdev->resync_work);
}
-static int calc_resync_rate(struct drbd_conf *mdev)
-{
- int d = mdev->data_delay / 1000; /* us -> ms */
- int td = mdev->sync_conf.throttle_th * 100; /* 0.1s -> ms */
- int hd = mdev->sync_conf.hold_off_th * 100; /* 0.1s -> ms */
- int cr = mdev->sync_conf.rate;
-
- return d <= td ? cr :
- d >= hd ? 0 :
- cr + (cr * (td - d) / (hd - td));
-}
-
int w_make_resync_request(struct drbd_conf *mdev,
struct drbd_work *w, int cancel)
{
max_segment_size = mdev->agreed_pro_version < 94 ?
queue_max_segment_size(mdev->rq_queue) : DRBD_MAX_SEGMENT_SIZE;
- mdev->c_sync_rate = calc_resync_rate(mdev);
- number = SLEEP_TIME * mdev->c_sync_rate / ((BM_BLOCK_SIZE / 1024) * HZ);
+ number = SLEEP_TIME * mdev->sync_conf.rate / ((BM_BLOCK_SIZE / 1024) * HZ);
pe = atomic_read(&mdev->rs_pending_cnt);
mutex_lock(&mdev->data.mutex);
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/bio.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/jiffies.h>
#include <linux/fcntl.h>
static DECLARE_WAIT_QUEUE_HEAD(fdc_wait);
static DECLARE_WAIT_QUEUE_HEAD(command_done);
-#define NO_SIGNAL (!interruptible || !signal_pending(current))
-
/* Errors during formatting are counted here. */
static int format_errors;
static int *errors;
typedef void (*done_f)(int);
-static struct cont_t {
+static const struct cont_t {
void (*interrupt)(void);
/* this is called after the interrupt of the
* main command */
#define NEED_1_RECAL -2
#define NEED_2_RECAL -3
-static int usage_count;
+static atomic_t usage_count = ATOMIC_INIT(0);
/* buffer related variables */
static int buffer_track = -1;
}
/* locks the driver */
-static int _lock_fdc(int drive, bool interruptible, int line)
+static int lock_fdc(int drive, bool interruptible)
{
- if (!usage_count) {
- pr_err("Trying to lock fdc while usage count=0 at line %d\n",
- line);
+ if (WARN(atomic_read(&usage_count) == 0,
+ "Trying to lock fdc while usage count=0\n"))
return -1;
- }
-
- if (test_and_set_bit(0, &fdc_busy)) {
- DECLARE_WAITQUEUE(wait, current);
- add_wait_queue(&fdc_wait, &wait);
-
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (!test_and_set_bit(0, &fdc_busy))
- break;
- schedule();
-
- if (!NO_SIGNAL) {
- remove_wait_queue(&fdc_wait, &wait);
- return -EINTR;
- }
- }
+ if (wait_event_interruptible(fdc_wait, !test_and_set_bit(0, &fdc_busy)))
+ return -EINTR;
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&fdc_wait, &wait);
- flush_scheduled_work();
- }
command_status = FD_COMMAND_NONE;
__reschedule_timeout(drive, "lock fdc");
return 0;
}
-#define lock_fdc(drive, interruptible) \
- _lock_fdc(drive, interruptible, __LINE__)
-
/* unlocks the driver */
-static inline void unlock_fdc(void)
+static void unlock_fdc(void)
{
unsigned long flags;
/* Set perpendicular mode as required, based on data rate, if supported.
* 82077 Now tested. 1Mbps data rate only possible with 82077-1.
*/
-static inline void perpendicular_mode(void)
+static void perpendicular_mode(void)
{
unsigned char perp_mode;
wake_up(&command_done);
}
-static struct cont_t wakeup_cont = {
+static const struct cont_t wakeup_cont = {
.interrupt = empty,
.redo = do_wakeup,
.error = empty,
.done = (done_f)empty
};
-static struct cont_t intr_cont = {
+static const struct cont_t intr_cont = {
.interrupt = empty,
.redo = process_fd_request,
.error = empty,
schedule_bh(handler);
- if (command_status < 2 && NO_SIGNAL) {
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(&command_done, &wait);
- for (;;) {
- set_current_state(interruptible ?
- TASK_INTERRUPTIBLE :
- TASK_UNINTERRUPTIBLE);
-
- if (command_status >= 2 || !NO_SIGNAL)
- break;
-
- is_alive(__func__, "");
- schedule();
- }
-
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&command_done, &wait);
- }
+ if (interruptible)
+ wait_event_interruptible(command_done, command_status >= 2);
+ else
+ wait_event(command_done, command_status >= 2);
if (command_status < 2) {
cancel_activity();
debugt(__func__, "queue format request");
}
-static struct cont_t format_cont = {
+static const struct cont_t format_cont = {
.interrupt = format_interrupt,
.redo = redo_format,
.error = bad_flp_intr,
int tracksize;
int ssize;
- if (max_buffer_sectors == 0) {
- pr_info("VFS: Block I/O scheduled on unopened device\n");
+ if (WARN(max_buffer_sectors == 0, "VFS: Block I/O scheduled on unopened device\n"))
return 0;
- }
set_fdc((long)current_req->rq_disk->private_data);
return;
}
-static struct cont_t rw_cont = {
+static const struct cont_t rw_cont = {
.interrupt = rw_interrupt,
.redo = redo_fd_request,
.error = bad_flp_intr,
static void do_fd_request(struct request_queue *q)
{
- if (max_buffer_sectors == 0) {
- pr_info("VFS: %s called on non-open device\n", __func__);
+ if (WARN(max_buffer_sectors == 0,
+ "VFS: %s called on non-open device\n", __func__))
return;
- }
- if (usage_count == 0) {
- pr_info("warning: usage count=0, current_req=%p exiting\n",
- current_req);
- pr_info("sect=%ld type=%x flags=%x\n",
- (long)blk_rq_pos(current_req), current_req->cmd_type,
- current_req->cmd_flags);
+ if (WARN(atomic_read(&usage_count) == 0,
+ "warning: usage count=0, current_req=%p sect=%ld type=%x flags=%x\n",
+ current_req, (long)blk_rq_pos(current_req), current_req->cmd_type,
+ current_req->cmd_flags))
return;
- }
+
if (test_bit(0, &fdc_busy)) {
/* fdc busy, this new request will be treated when the
current one is done */
is_alive(__func__, "");
}
-static struct cont_t poll_cont = {
+static const struct cont_t poll_cont = {
.interrupt = success_and_wakeup,
.redo = floppy_ready,
.error = generic_failure,
pr_info("weird, reset interrupt called\n");
}
-static struct cont_t reset_cont = {
+static const struct cont_t reset_cont = {
.interrupt = reset_intr,
.redo = success_and_wakeup,
.error = generic_failure,
return copy_from_user(address, param, size) ? -EFAULT : 0;
}
-static inline const char *drive_name(int type, int drive)
+static const char *drive_name(int type, int drive)
{
struct floppy_struct *floppy;
generic_done(flag);
}
-static struct cont_t raw_cmd_cont = {
+static const struct cont_t raw_cmd_cont = {
.interrupt = success_and_wakeup,
.redo = floppy_start,
.error = generic_failure,
.done = raw_cmd_done
};
-static inline int raw_cmd_copyout(int cmd, void __user *param,
+static int raw_cmd_copyout(int cmd, void __user *param,
struct floppy_raw_cmd *ptr)
{
int ret;
}
}
-static inline int raw_cmd_copyin(int cmd, void __user *param,
+static int raw_cmd_copyin(int cmd, void __user *param,
struct floppy_raw_cmd **rcmd)
{
struct floppy_raw_cmd *ptr;
return 0;
}
-static inline int set_geometry(unsigned int cmd, struct floppy_struct *g,
+static int set_geometry(unsigned int cmd, struct floppy_struct *g,
int drive, int type, struct block_device *bdev)
{
int cnt;
}
/* handle obsolete ioctl's */
-static int ioctl_table[] = {
+static unsigned int ioctl_table[] = {
FDCLRPRM,
FDSETPRM,
FDDEFPRM,
FDTWADDLE
};
-static inline int normalize_ioctl(int *cmd, int *size)
+static int normalize_ioctl(unsigned int *cmd, int *size)
{
int i;
return 0;
}
-static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
+static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
unsigned long param)
{
int drive = (long)bdev->bd_disk->private_data;
return 0;
}
+static int fd_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = fd_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
static void __init config_types(void)
{
bool has_drive = false;
{
int drive = (long)disk->private_data;
+ lock_kernel();
mutex_lock(&open_lock);
if (UDRS->fd_ref < 0)
UDRS->fd_ref = 0;
if (!UDRS->fd_ref)
opened_bdev[drive] = NULL;
mutex_unlock(&open_lock);
+ unlock_kernel();
return 0;
}
int res = -EBUSY;
char *tmp;
+ lock_kernel();
mutex_lock(&open_lock);
old_dev = UDRS->fd_device;
if (opened_bdev[drive] && opened_bdev[drive] != bdev)
goto out;
}
mutex_unlock(&open_lock);
+ unlock_kernel();
return 0;
out:
if (UDRS->fd_ref < 0)
opened_bdev[drive] = NULL;
out2:
mutex_unlock(&open_lock);
+ unlock_kernel();
return res;
}
bio.bi_size = size;
bio.bi_bdev = bdev;
bio.bi_sector = 0;
+ bio.bi_flags = BIO_QUIET;
init_completion(&complete);
bio.bi_private = &complete;
bio.bi_end_io = floppy_rb0_complete;
if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
test_bit(FD_VERIFY_BIT, &UDRS->flags) ||
test_bit(drive, &fake_change) || NO_GEOM) {
- if (usage_count == 0) {
- pr_info("VFS: revalidate called on non-open device.\n");
+ if (WARN(atomic_read(&usage_count) == 0,
+ "VFS: revalidate called on non-open device.\n"))
return -EFAULT;
- }
+
lock_fdc(drive, false);
cf = (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
test_bit(FD_VERIFY_BIT, &UDRS->flags));
.owner = THIS_MODULE,
.open = floppy_open,
.release = floppy_release,
- .locked_ioctl = fd_ioctl,
+ .ioctl = fd_ioctl,
.getgeo = fd_getgeo,
.media_changed = check_floppy_change,
.revalidate_disk = floppy_revalidate,
return sprintf(buf, "%X\n", UDP->cmos);
}
-DEVICE_ATTR(cmos, S_IRUGO, floppy_cmos_show, NULL);
+static DEVICE_ATTR(cmos, S_IRUGO, floppy_cmos_show, NULL);
static void floppy_device_release(struct device *dev)
{
int i, unit, drive;
int err, dr;
+ set_debugt();
+ interruptjiffies = resultjiffies = jiffies;
+
#if defined(CONFIG_PPC)
if (check_legacy_ioport(FDC1))
return -ENODEV;
platform_device_unregister(&floppy_device[drive]);
out_flush_work:
flush_scheduled_work();
- if (usage_count)
+ if (atomic_read(&usage_count))
floppy_release_irq_and_dma();
out_unreg_region:
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
return err;
}
-static DEFINE_SPINLOCK(floppy_usage_lock);
-
static const struct io_region {
int offset;
int size;
static int floppy_grab_irq_and_dma(void)
{
- unsigned long flags;
-
- spin_lock_irqsave(&floppy_usage_lock, flags);
- if (usage_count++) {
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+ if (atomic_inc_return(&usage_count) > 1)
return 0;
- }
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
/*
* We might have scheduled a free_irq(), wait it to
if (fd_request_irq()) {
DPRINT("Unable to grab IRQ%d for the floppy driver\n",
FLOPPY_IRQ);
- spin_lock_irqsave(&floppy_usage_lock, flags);
- usage_count--;
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+ atomic_dec(&usage_count);
return -1;
}
if (fd_request_dma()) {
use_virtual_dma = can_use_virtual_dma = 1;
if (!(can_use_virtual_dma & 1)) {
fd_free_irq();
- spin_lock_irqsave(&floppy_usage_lock, flags);
- usage_count--;
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+ atomic_dec(&usage_count);
return -1;
}
}
fd_free_dma();
while (--fdc >= 0)
floppy_release_regions(fdc);
- spin_lock_irqsave(&floppy_usage_lock, flags);
- usage_count--;
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+ atomic_dec(&usage_count);
return -1;
}
#endif
long tmpsize;
unsigned long tmpaddr;
- unsigned long flags;
- spin_lock_irqsave(&floppy_usage_lock, flags);
- if (--usage_count) {
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+ if (!atomic_dec_and_test(&usage_count))
return;
- }
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+
if (irqdma_allocated) {
fd_disable_dma();
fd_free_dma();
del_timer_sync(&fd_timer);
blk_cleanup_queue(floppy_queue);
- if (usage_count)
+ if (atomic_read(&usage_count))
floppy_release_irq_and_dma();
/* eject disk, if any */
req_data_dir(req) == READ ? "read" : "writ",
cyl, head, sec, nsect, req->buffer);
#endif
- if (blk_fs_request(req)) {
+ if (req->cmd_type == REQ_TYPE_FS) {
switch (rq_data_dir(req)) {
case READ:
hd_out(disk, nsect, sec, head, cyl, ATA_CMD_PIO_READ,
#include <linux/compat.h>
#include <linux/suspend.h>
#include <linux/freezer.h>
+#include <linux/smp_lock.h>
#include <linux/writeback.h>
#include <linux/buffer_head.h> /* for invalidate_bdev() */
#include <linux/completion.h>
pos = ((loff_t) bio->bi_sector << 9) + lo->lo_offset;
if (bio_rw(bio) == WRITE) {
- bool barrier = bio_rw_flagged(bio, BIO_RW_BARRIER);
+ bool barrier = (bio->bi_rw & REQ_HARDBARRIER);
struct file *file = lo->lo_backing_file;
if (barrier) {
lo->lo_queue->unplug_fn = loop_unplug;
if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
- blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN, NULL);
+ blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN);
set_capacity(lo->lo_disk, size);
bd_set_size(bdev, size << 9);
{
struct loop_device *lo = bdev->bd_disk->private_data;
+ lock_kernel();
mutex_lock(&lo->lo_ctl_mutex);
lo->lo_refcnt++;
mutex_unlock(&lo->lo_ctl_mutex);
+ unlock_kernel();
return 0;
}
struct loop_device *lo = disk->private_data;
int err;
+ lock_kernel();
mutex_lock(&lo->lo_ctl_mutex);
if (--lo->lo_refcnt)
out:
mutex_unlock(&lo->lo_ctl_mutex);
out_unlocked:
+ lock_kernel();
return 0;
}
break;
}
- if (unlikely(!blk_fs_request(host->req))) {
+ if (unlikely(host->req->cmd_type != REQ_TYPE_FS)) {
mg_end_request_cur(host, -EIO);
continue;
}
continue;
}
- if (unlikely(!blk_fs_request(req))) {
+ if (unlikely(req->cmd_type != REQ_TYPE_FS)) {
mg_end_request_cur(host, -EIO);
continue;
}
#include <linux/errno.h>
#include <linux/file.h>
#include <linux/ioctl.h>
+#include <linux/smp_lock.h>
#include <linux/compiler.h>
#include <linux/err.h>
#include <linux/kernel.h>
static void nbd_handle_req(struct nbd_device *lo, struct request *req)
{
- if (!blk_fs_request(req))
+ if (req->cmd_type != REQ_TYPE_FS)
goto error_out;
nbd_cmd(req) = NBD_CMD_READ;
dprintk(DBG_IOCTL, "%s: nbd_ioctl cmd=%s(0x%x) arg=%lu\n",
lo->disk->disk_name, ioctl_cmd_to_ascii(cmd), cmd, arg);
+ lock_kernel();
mutex_lock(&lo->tx_lock);
error = __nbd_ioctl(bdev, lo, cmd, arg);
mutex_unlock(&lo->tx_lock);
+ unlock_kernel();
return error;
}
static const struct block_device_operations nbd_fops =
{
.owner = THIS_MODULE,
- .locked_ioctl = nbd_ioctl,
+ .ioctl = nbd_ioctl,
};
/*
break;
/* filter out block requests we don't understand */
- if (!blk_fs_request(rq) && !blk_barrier_rq(rq)) {
+ if (rq->cmd_type != REQ_TYPE_FS &&
+ !(rq->cmd_flags & REQ_HARDBARRIER)) {
blk_end_request_all(rq, 0);
continue;
}
* driver-specific, etc.
*/
- do_flush = (rq->special == (void *) 0xdeadbeefUL);
+ do_flush = rq->cmd_flags & REQ_FLUSH;
do_write = (rq_data_dir(rq) == WRITE);
if (!do_flush) { /* osd_flush does not use a bio */
}
}
-static void osdblk_prepare_flush(struct request_queue *q, struct request *rq)
-{
- /* add driver-specific marker, to indicate that this request
- * is a flush command
- */
- rq->special = (void *) 0xdeadbeefUL;
-}
-
static void osdblk_free_disk(struct osdblk_device *osdev)
{
struct gendisk *disk = osdev->disk;
blk_queue_stack_limits(q, osd_request_queue(osdev->osd));
blk_queue_prep_rq(q, blk_queue_start_tag);
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, osdblk_prepare_flush);
+ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH);
disk->queue = q;
#include <linux/cdrom.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <asm/uaccess.h>
static DEFINE_SPINLOCK(pcd_lock);
static int pcd_block_open(struct block_device *bdev, fmode_t mode)
{
struct pcd_unit *cd = bdev->bd_disk->private_data;
- return cdrom_open(&cd->info, bdev, mode);
+ int ret;
+
+ lock_kernel();
+ ret = cdrom_open(&cd->info, bdev, mode);
+ unlock_kernel();
+
+ return ret;
}
static int pcd_block_release(struct gendisk *disk, fmode_t mode)
{
struct pcd_unit *cd = disk->private_data;
+ lock_kernel();
cdrom_release(&cd->info, mode);
+ unlock_kernel();
return 0;
}
unsigned cmd, unsigned long arg)
{
struct pcd_unit *cd = bdev->bd_disk->private_data;
- return cdrom_ioctl(&cd->info, bdev, mode, cmd, arg);
+ int ret;
+
+ lock_kernel();
+ ret = cdrom_ioctl(&cd->info, bdev, mode, cmd, arg);
+ unlock_kernel();
+
+ return ret;
}
static int pcd_block_media_changed(struct gendisk *disk)
.owner = THIS_MODULE,
.open = pcd_block_open,
.release = pcd_block_release,
- .locked_ioctl = pcd_block_ioctl,
+ .ioctl = pcd_block_ioctl,
.media_changed = pcd_block_media_changed,
};
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/kernel.h>
+#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <linux/workqueue.h>
static enum action do_pd_io_start(void)
{
- if (blk_special_request(pd_req)) {
+ if (pd_req->cmd_type == REQ_TYPE_SPECIAL) {
phase = pd_special;
return pd_special();
}
{
struct pd_unit *disk = bdev->bd_disk->private_data;
+ lock_kernel();
disk->access++;
if (disk->removable) {
pd_special_command(disk, pd_media_check);
pd_special_command(disk, pd_door_lock);
}
+ unlock_kernel();
return 0;
}
switch (cmd) {
case CDROMEJECT:
+ lock_kernel();
if (disk->access == 1)
pd_special_command(disk, pd_eject);
+ unlock_kernel();
return 0;
default:
return -EINVAL;
{
struct pd_unit *disk = p->private_data;
+ lock_kernel();
if (!--disk->access && disk->removable)
pd_special_command(disk, pd_door_unlock);
+ unlock_kernel();
return 0;
}
.owner = THIS_MODULE,
.open = pd_open,
.release = pd_release,
- .locked_ioctl = pd_ioctl,
+ .ioctl = pd_ioctl,
.getgeo = pd_getgeo,
.media_changed = pd_check_media,
.revalidate_disk= pd_revalidate
#include <linux/spinlock.h>
#include <linux/blkdev.h>
#include <linux/blkpg.h>
+#include <linux/smp_lock.h>
#include <asm/uaccess.h>
static DEFINE_SPINLOCK(pf_spin_lock);
.owner = THIS_MODULE,
.open = pf_open,
.release = pf_release,
- .locked_ioctl = pf_ioctl,
+ .ioctl = pf_ioctl,
.getgeo = pf_getgeo,
.media_changed = pf_check_media,
};
static int pf_open(struct block_device *bdev, fmode_t mode)
{
struct pf_unit *pf = bdev->bd_disk->private_data;
+ int ret;
+ lock_kernel();
pf_identify(pf);
+ ret = -ENODEV;
if (pf->media_status == PF_NM)
- return -ENODEV;
+ goto out;
+ ret = -EROFS;
if ((pf->media_status == PF_RO) && (mode & FMODE_WRITE))
- return -EROFS;
+ goto out;
+ ret = 0;
pf->access++;
if (pf->removable)
pf_lock(pf, 1);
-
- return 0;
+out:
+ unlock_kernel();
+ return ret;
}
static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo)
if (pf->access != 1)
return -EBUSY;
+ lock_kernel();
pf_eject(pf);
+ unlock_kernel();
+
return 0;
}
{
struct pf_unit *pf = disk->private_data;
- if (pf->access <= 0)
+ lock_kernel();
+ if (pf->access <= 0) {
+ unlock_kernel();
return -EINVAL;
+ }
pf->access--;
if (!pf->access && pf->removable)
pf_lock(pf, 0);
+ unlock_kernel();
return 0;
}
#include <linux/seq_file.h>
#include <linux/miscdevice.h>
#include <linux/freezer.h>
+#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <scsi/scsi_cmnd.h>
pkt->bio->bi_flags = 1 << BIO_UPTODATE;
pkt->bio->bi_idx = 0;
- BUG_ON(pkt->bio->bi_rw != (1 << BIO_RW));
+ BUG_ON(pkt->bio->bi_rw != REQ_WRITE);
BUG_ON(pkt->bio->bi_vcnt != pkt->frames);
BUG_ON(pkt->bio->bi_size != pkt->frames * CD_FRAMESIZE);
BUG_ON(pkt->bio->bi_end_io != pkt_end_io_packet_write);
VPRINTK(DRIVER_NAME": entering open\n");
+ lock_kernel();
mutex_lock(&ctl_mutex);
pd = pkt_find_dev_from_minor(MINOR(bdev->bd_dev));
if (!pd) {
}
mutex_unlock(&ctl_mutex);
+ unlock_kernel();
return 0;
out_dec:
out:
VPRINTK(DRIVER_NAME": failed open (%d)\n", ret);
mutex_unlock(&ctl_mutex);
+ unlock_kernel();
return ret;
}
struct pktcdvd_device *pd = disk->private_data;
int ret = 0;
+ lock_kernel();
mutex_lock(&ctl_mutex);
pd->refcnt--;
BUG_ON(pd->refcnt < 0);
pkt_release_dev(pd, flush);
}
mutex_unlock(&ctl_mutex);
+ unlock_kernel();
return ret;
}
static int pkt_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
{
struct pktcdvd_device *pd = bdev->bd_disk->private_data;
+ int ret;
VPRINTK("pkt_ioctl: cmd %x, dev %d:%d\n", cmd,
MAJOR(bdev->bd_dev), MINOR(bdev->bd_dev));
+ lock_kernel();
switch (cmd) {
case CDROMEJECT:
/*
case CDROM_LAST_WRITTEN:
case CDROM_SEND_PACKET:
case SCSI_IOCTL_SEND_COMMAND:
- return __blkdev_driver_ioctl(pd->bdev, mode, cmd, arg);
+ ret = __blkdev_driver_ioctl(pd->bdev, mode, cmd, arg);
+ break;
default:
VPRINTK(DRIVER_NAME": Unknown ioctl for %s (%x)\n", pd->name, cmd);
- return -ENOTTY;
+ ret = -ENOTTY;
}
+ unlock_kernel();
- return 0;
+ return ret;
}
static int pkt_media_changed(struct gendisk *disk)
.owner = THIS_MODULE,
.open = pkt_open,
.release = pkt_close,
- .locked_ioctl = pkt_ioctl,
+ .ioctl = pkt_ioctl,
.media_changed = pkt_media_changed,
};
dev_dbg(&dev->sbd.core, "%s:%u\n", __func__, __LINE__);
while ((req = blk_fetch_request(q))) {
- if (blk_fs_request(req)) {
- if (ps3disk_submit_request_sg(dev, req))
- break;
- } else if (req->cmd_type == REQ_TYPE_LINUX_BLOCK &&
- req->cmd[0] == REQ_LB_OP_FLUSH) {
+ if (req->cmd_flags & REQ_FLUSH) {
if (ps3disk_submit_flush_request(dev, req))
break;
+ } else if (req->cmd_type == REQ_TYPE_FS) {
+ if (ps3disk_submit_request_sg(dev, req))
+ break;
} else {
blk_dump_rq_flags(req, DEVICE_NAME " bad request");
__blk_end_request_all(req, -EIO);
return IRQ_HANDLED;
}
- if (req->cmd_type == REQ_TYPE_LINUX_BLOCK &&
- req->cmd[0] == REQ_LB_OP_FLUSH) {
+ if (req->cmd_flags & REQ_FLUSH) {
read = 0;
op = "flush";
} else {
return 0;
}
-static void ps3disk_prepare_flush(struct request_queue *q, struct request *req)
-{
- struct ps3_storage_device *dev = q->queuedata;
-
- dev_dbg(&dev->sbd.core, "%s:%u\n", __func__, __LINE__);
-
- req->cmd_type = REQ_TYPE_LINUX_BLOCK;
- req->cmd[0] = REQ_LB_OP_FLUSH;
-}
-
static unsigned long ps3disk_mask;
static DEFINE_MUTEX(ps3disk_mask_mutex);
blk_queue_dma_alignment(queue, dev->blk_size-1);
blk_queue_logical_block_size(queue, dev->blk_size);
- blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH,
- ps3disk_prepare_flush);
+ blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH);
blk_queue_max_segments(queue, -1);
blk_queue_max_segment_size(queue, dev->bounce_size);
#include <linux/fd.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/hdreg.h>
#include <linux/kernel.h>
#include <linux/delay.h>
return err;
}
+static int floppy_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = floppy_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
static int floppy_release(struct gendisk *disk, fmode_t mode)
{
struct floppy_state *fs = disk->private_data;
struct swim __iomem *base = fs->swd->base;
+ lock_kernel();
if (fs->ref_count < 0)
fs->ref_count = 0;
else if (fs->ref_count > 0)
if (fs->ref_count == 0)
swim_motor(base, OFF);
+ unlock_kernel();
return 0;
}
case FDEJECT:
if (fs->ref_count != 1)
return -EBUSY;
+ lock_kernel();
err = floppy_eject(fs);
+ unlock_kernel();
return err;
case FDGETPRM:
static const struct block_device_operations floppy_fops = {
.owner = THIS_MODULE,
- .open = floppy_open,
+ .open = floppy_unlocked_open,
.release = floppy_release,
- .locked_ioctl = floppy_ioctl,
+ .ioctl = floppy_ioctl,
.getgeo = floppy_getgeo,
.media_changed = floppy_check_change,
.revalidate_disk = floppy_revalidate,
#include <linux/ioctl.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/io.h>
static struct floppy_struct floppy_type =
{ 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,NULL }; /* 7 1.44MB 3.5" */
-static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
+static int floppy_locked_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long param)
{
struct floppy_state *fs = bdev->bd_disk->private_data;
return -ENOTTY;
}
+static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = floppy_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
static int floppy_open(struct block_device *bdev, fmode_t mode)
{
struct floppy_state *fs = bdev->bd_disk->private_data;
return 0;
}
+static int floppy_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = floppy_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
static int floppy_release(struct gendisk *disk, fmode_t mode)
{
struct floppy_state *fs = disk->private_data;
struct swim3 __iomem *sw = fs->swim3;
+ lock_kernel();
if (fs->ref_count > 0 && --fs->ref_count == 0) {
swim3_action(fs, MOTOR_OFF);
out_8(&sw->control_bic, 0xff);
swim3_select(fs, RELAX);
}
+ unlock_kernel();
return 0;
}
}
static const struct block_device_operations floppy_fops = {
- .open = floppy_open,
+ .open = floppy_unlocked_open,
.release = floppy_release,
- .locked_ioctl = floppy_ioctl,
+ .ioctl = floppy_ioctl,
.media_changed = floppy_check_change,
.revalidate_disk= floppy_revalidate,
};
#include <linux/timer.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <scsi/scsi.h>
#define DRV_NAME "ub"
return 0;
}
- if (lun->changed && !blk_pc_request(rq)) {
+ if (lun->changed && rq->cmd_type != REQ_TYPE_BLOCK_PC) {
blk_start_request(rq);
ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
return 0;
}
urq->nsg = n_elem;
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
ub_cmd_build_packet(sc, lun, cmd, urq);
} else {
ub_cmd_build_block(sc, lun, cmd, urq);
rq = urq->rq;
if (cmd->error == 0) {
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
if (cmd->act_len >= rq->resid_len)
rq->resid_len = 0;
else
}
}
} else {
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
/* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
rq->sense_len = UB_SENSE_SIZE;
return rc;
}
+static int ub_bd_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = ub_bd_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
+
/*
*/
static int ub_bd_release(struct gendisk *disk, fmode_t mode)
struct ub_lun *lun = disk->private_data;
struct ub_dev *sc = lun->udev;
+ lock_kernel();
ub_put(sc);
+ unlock_kernel();
+
return 0;
}
{
struct gendisk *disk = bdev->bd_disk;
void __user *usermem = (void __user *) arg;
+ int ret;
+
+ lock_kernel();
+ ret = scsi_cmd_ioctl(disk->queue, disk, mode, cmd, usermem);
+ unlock_kernel();
- return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, usermem);
+ return ret;
}
/*
static const struct block_device_operations ub_bd_fops = {
.owner = THIS_MODULE,
- .open = ub_bd_open,
+ .open = ub_bd_unlocked_open,
.release = ub_bd_release,
- .locked_ioctl = ub_bd_ioctl,
+ .ioctl = ub_bd_ioctl,
.media_changed = ub_bd_media_changed,
.revalidate_disk = ub_bd_revalidate,
};
le32_to_cpu(desc->local_addr)>>9,
le32_to_cpu(desc->transfer_size));
dump_dmastat(card, control);
- } else if (test_bit(BIO_RW, &bio->bi_rw) &&
+ } else if ((bio->bi_rw & REQ_WRITE) &&
le32_to_cpu(desc->local_addr) >> 9 ==
card->init_size) {
card->init_size += le32_to_cpu(desc->transfer_size) >> 9;
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/string.h>
+#include <linux/smp_lock.h>
#include <linux/dma-mapping.h>
#include <linux/completion.h>
#include <linux/device.h>
return 0;
}
+static int viodasd_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = viodasd_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
+
/*
* External release entry point.
*/
struct viodasd_device *d = disk->private_data;
HvLpEvent_Rc hvrc;
+ lock_kernel();
/* Send the event to OS/400. We DON'T expect a response */
hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp,
HvLpEvent_Type_VirtualIo,
0, 0, 0);
if (hvrc != 0)
pr_warning("HV close call failed %d\n", (int)hvrc);
+
+ unlock_kernel();
+
return 0;
}
*/
static const struct block_device_operations viodasd_fops = {
.owner = THIS_MODULE,
- .open = viodasd_open,
+ .open = viodasd_unlocked_open,
.release = viodasd_release,
.getgeo = viodasd_getgeo,
};
if (req == NULL)
return;
/* check that request contains a valid command */
- if (!blk_fs_request(req)) {
+ if (req->cmd_type != REQ_TYPE_FS) {
viodasd_end_request(req, -EIO, blk_rq_sectors(req));
continue;
}
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/hdreg.h>
#include <linux/virtio.h>
#include <linux/virtio_blk.h>
break;
}
- if (blk_pc_request(vbr->req)) {
+ switch (vbr->req->cmd_type) {
+ case REQ_TYPE_BLOCK_PC:
vbr->req->resid_len = vbr->in_hdr.residual;
vbr->req->sense_len = vbr->in_hdr.sense_len;
vbr->req->errors = vbr->in_hdr.errors;
- }
- if (blk_special_request(vbr->req))
+ break;
+ case REQ_TYPE_SPECIAL:
vbr->req->errors = (error != 0);
+ break;
+ default:
+ break;
+ }
__blk_end_request_all(vbr->req, error);
list_del(&vbr->list);
return false;
vbr->req = req;
- switch (req->cmd_type) {
- case REQ_TYPE_FS:
- vbr->out_hdr.type = 0;
- vbr->out_hdr.sector = blk_rq_pos(vbr->req);
- vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
- break;
- case REQ_TYPE_BLOCK_PC:
- vbr->out_hdr.type = VIRTIO_BLK_T_SCSI_CMD;
- vbr->out_hdr.sector = 0;
- vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
- break;
- case REQ_TYPE_SPECIAL:
- vbr->out_hdr.type = VIRTIO_BLK_T_GET_ID;
+
+ if (req->cmd_flags & REQ_FLUSH) {
+ vbr->out_hdr.type = VIRTIO_BLK_T_FLUSH;
vbr->out_hdr.sector = 0;
vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
- break;
- case REQ_TYPE_LINUX_BLOCK:
- if (req->cmd[0] == REQ_LB_OP_FLUSH) {
- vbr->out_hdr.type = VIRTIO_BLK_T_FLUSH;
+ } else {
+ switch (req->cmd_type) {
+ case REQ_TYPE_FS:
+ vbr->out_hdr.type = 0;
+ vbr->out_hdr.sector = blk_rq_pos(vbr->req);
+ vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
+ break;
+ case REQ_TYPE_BLOCK_PC:
+ vbr->out_hdr.type = VIRTIO_BLK_T_SCSI_CMD;
vbr->out_hdr.sector = 0;
vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
break;
+ case REQ_TYPE_SPECIAL:
+ vbr->out_hdr.type = VIRTIO_BLK_T_GET_ID;
+ vbr->out_hdr.sector = 0;
+ vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
+ break;
+ default:
+ /* We don't put anything else in the queue. */
+ BUG();
}
- /*FALLTHRU*/
- default:
- /* We don't put anything else in the queue. */
- BUG();
}
- if (blk_barrier_rq(vbr->req))
+ if (vbr->req->cmd_flags & REQ_HARDBARRIER)
vbr->out_hdr.type |= VIRTIO_BLK_T_BARRIER;
sg_set_buf(&vblk->sg[out++], &vbr->out_hdr, sizeof(vbr->out_hdr));
* block, and before the normal inhdr we put the sense data and the
* inhdr with additional status information before the normal inhdr.
*/
- if (blk_pc_request(vbr->req))
+ if (vbr->req->cmd_type == REQ_TYPE_BLOCK_PC)
sg_set_buf(&vblk->sg[out++], vbr->req->cmd, vbr->req->cmd_len);
num = blk_rq_map_sg(q, vbr->req, vblk->sg + out);
- if (blk_pc_request(vbr->req)) {
+ if (vbr->req->cmd_type == REQ_TYPE_BLOCK_PC) {
sg_set_buf(&vblk->sg[num + out + in++], vbr->req->sense, 96);
sg_set_buf(&vblk->sg[num + out + in++], &vbr->in_hdr,
sizeof(vbr->in_hdr));
virtqueue_kick(vblk->vq);
}
-static void virtblk_prepare_flush(struct request_queue *q, struct request *req)
-{
- req->cmd_type = REQ_TYPE_LINUX_BLOCK;
- req->cmd[0] = REQ_LB_OP_FLUSH;
-}
-
/* return id (s/n) string for *disk to *id_str
*/
static int virtblk_get_id(struct gendisk *disk, char *id_str)
return blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
}
-static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
+static int virtblk_locked_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long data)
{
struct gendisk *disk = bdev->bd_disk;
(void __user *)data);
}
+static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = virtblk_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
/* We provide getgeo only to please some old bootloader/partitioning tools */
static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
{
}
static const struct block_device_operations virtblk_fops = {
- .locked_ioctl = virtblk_ioctl,
+ .ioctl = virtblk_ioctl,
.owner = THIS_MODULE,
.getgeo = virtblk_getgeo,
};
* flushing a volatile write cache on the host. Use that
* to implement write barrier support.
*/
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH,
- virtblk_prepare_flush);
+ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH);
} else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER)) {
/*
* If the BARRIER feature is supported the host expects us
* never re-orders outstanding I/O. This feature is not
* useful for real life scenarious and deprecated.
*/
- blk_queue_ordered(q, QUEUE_ORDERED_TAG, NULL);
+ blk_queue_ordered(q, QUEUE_ORDERED_TAG);
} else {
/*
* If the FLUSH feature is not supported we must assume that
* caching. We still need to drain the queue to provider
* proper barrier semantics.
*/
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN, NULL);
+ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN);
}
/* If disk is read-only in the host, the guest should obey */
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/blkpg.h>
#include <linux/delay.h>
#include <linux/io.h>
static const struct block_device_operations xd_fops = {
.owner = THIS_MODULE,
- .locked_ioctl = xd_ioctl,
+ .ioctl = xd_ioctl,
.getgeo = xd_getgeo,
};
static DECLARE_WAIT_QUEUE_HEAD(xd_wait_int);
int res = -EIO;
int retry;
- if (!blk_fs_request(req))
+ if (req->cmd_type != REQ_TYPE_FS)
goto done;
if (block + count > get_capacity(req->rq_disk))
goto done;
}
/* xd_ioctl: handle device ioctl's */
-static int xd_ioctl(struct block_device *bdev, fmode_t mode, u_int cmd, u_long arg)
+static int xd_locked_ioctl(struct block_device *bdev, fmode_t mode, u_int cmd, u_long arg)
{
switch (cmd) {
case HDIO_SET_DMA:
}
}
+static int xd_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = xd_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
/* xd_readwrite: handle a read/write request */
static int xd_readwrite (u_char operation,XD_INFO *p,char *buffer,u_int block,u_int count)
{
#include <linux/cdrom.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/scatterlist.h>
#include <xen/xen.h>
*/
struct blkfront_info
{
+ struct mutex mutex;
struct xenbus_device *xbdev;
struct gendisk *gd;
int vdevice;
unsigned long shadow_free;
int feature_barrier;
int is_ready;
-
- /**
- * The number of people holding this device open. We won't allow a
- * hot-unplug unless this is 0.
- */
- int users;
};
static DEFINE_SPINLOCK(blkif_io_lock);
+static unsigned int nr_minors;
+static unsigned long *minors;
+static DEFINE_SPINLOCK(minor_lock);
+
#define MAXIMUM_OUTSTANDING_BLOCK_REQS \
(BLKIF_MAX_SEGMENTS_PER_REQUEST * BLK_RING_SIZE)
#define GRANT_INVALID_REF 0
info->shadow_free = id;
}
+static int xlbd_reserve_minors(unsigned int minor, unsigned int nr)
+{
+ unsigned int end = minor + nr;
+ int rc;
+
+ if (end > nr_minors) {
+ unsigned long *bitmap, *old;
+
+ bitmap = kzalloc(BITS_TO_LONGS(end) * sizeof(*bitmap),
+ GFP_KERNEL);
+ if (bitmap == NULL)
+ return -ENOMEM;
+
+ spin_lock(&minor_lock);
+ if (end > nr_minors) {
+ old = minors;
+ memcpy(bitmap, minors,
+ BITS_TO_LONGS(nr_minors) * sizeof(*bitmap));
+ minors = bitmap;
+ nr_minors = BITS_TO_LONGS(end) * BITS_PER_LONG;
+ } else
+ old = bitmap;
+ spin_unlock(&minor_lock);
+ kfree(old);
+ }
+
+ spin_lock(&minor_lock);
+ if (find_next_bit(minors, end, minor) >= end) {
+ for (; minor < end; ++minor)
+ __set_bit(minor, minors);
+ rc = 0;
+ } else
+ rc = -EBUSY;
+ spin_unlock(&minor_lock);
+
+ return rc;
+}
+
+static void xlbd_release_minors(unsigned int minor, unsigned int nr)
+{
+ unsigned int end = minor + nr;
+
+ BUG_ON(end > nr_minors);
+ spin_lock(&minor_lock);
+ for (; minor < end; ++minor)
+ __clear_bit(minor, minors);
+ spin_unlock(&minor_lock);
+}
+
static void blkif_restart_queue_callback(void *arg)
{
struct blkfront_info *info = (struct blkfront_info *)arg;
ring_req->operation = rq_data_dir(req) ?
BLKIF_OP_WRITE : BLKIF_OP_READ;
- if (blk_barrier_rq(req))
+ if (req->cmd_flags & REQ_HARDBARRIER)
ring_req->operation = BLKIF_OP_WRITE_BARRIER;
ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
blk_start_request(req);
- if (!blk_fs_request(req)) {
+ if (req->cmd_type != REQ_TYPE_FS) {
__blk_end_request_all(req, -EIO);
continue;
}
static int xlvbd_barrier(struct blkfront_info *info)
{
int err;
+ const char *barrier;
- err = blk_queue_ordered(info->rq,
- info->feature_barrier ? QUEUE_ORDERED_DRAIN : QUEUE_ORDERED_NONE,
- NULL);
+ switch (info->feature_barrier) {
+ case QUEUE_ORDERED_DRAIN: barrier = "enabled (drain)"; break;
+ case QUEUE_ORDERED_TAG: barrier = "enabled (tag)"; break;
+ case QUEUE_ORDERED_NONE: barrier = "disabled"; break;
+ default: return -EINVAL;
+ }
+
+ err = blk_queue_ordered(info->rq, info->feature_barrier);
if (err)
return err;
printk(KERN_INFO "blkfront: %s: barriers %s\n",
- info->gd->disk_name,
- info->feature_barrier ? "enabled" : "disabled");
+ info->gd->disk_name, barrier);
return 0;
}
if ((minor % nr_parts) == 0)
nr_minors = nr_parts;
+ err = xlbd_reserve_minors(minor, nr_minors);
+ if (err)
+ goto out;
+ err = -ENODEV;
+
gd = alloc_disk(nr_minors);
if (gd == NULL)
- goto out;
+ goto release;
offset = minor / nr_parts;
if (xlvbd_init_blk_queue(gd, sector_size)) {
del_gendisk(gd);
- goto out;
+ goto release;
}
info->rq = gd->queue;
info->gd = gd;
- if (info->feature_barrier)
- xlvbd_barrier(info);
+ xlvbd_barrier(info);
if (vdisk_info & VDISK_READONLY)
set_disk_ro(gd, 1);
return 0;
+ release:
+ xlbd_release_minors(minor, nr_minors);
out:
return err;
}
+static void xlvbd_release_gendisk(struct blkfront_info *info)
+{
+ unsigned int minor, nr_minors;
+ unsigned long flags;
+
+ if (info->rq == NULL)
+ return;
+
+ spin_lock_irqsave(&blkif_io_lock, flags);
+
+ /* No more blkif_request(). */
+ blk_stop_queue(info->rq);
+
+ /* No more gnttab callback work. */
+ gnttab_cancel_free_callback(&info->callback);
+ spin_unlock_irqrestore(&blkif_io_lock, flags);
+
+ /* Flush gnttab callback work. Must be done with no locks held. */
+ flush_scheduled_work();
+
+ del_gendisk(info->gd);
+
+ minor = info->gd->first_minor;
+ nr_minors = info->gd->minors;
+ xlbd_release_minors(minor, nr_minors);
+
+ blk_cleanup_queue(info->rq);
+ info->rq = NULL;
+
+ put_disk(info->gd);
+ info->gd = NULL;
+}
+
static void kick_pending_request_queues(struct blkfront_info *info)
{
if (!RING_FULL(&info->ring)) {
printk(KERN_WARNING "blkfront: %s: write barrier op failed\n",
info->gd->disk_name);
error = -EOPNOTSUPP;
- info->feature_barrier = 0;
+ info->feature_barrier = QUEUE_ORDERED_NONE;
xlvbd_barrier(info);
}
/* fall through */
/* Common code used when first setting up, and when resuming. */
-static int talk_to_backend(struct xenbus_device *dev,
+static int talk_to_blkback(struct xenbus_device *dev,
struct blkfront_info *info)
{
const char *message = NULL;
return err;
}
-
/**
* Entry point to this code when a new device is created. Allocate the basic
* structures and the ring buffer for communication with the backend, and
return -ENOMEM;
}
+ mutex_init(&info->mutex);
info->xbdev = dev;
info->vdevice = vdevice;
info->connected = BLKIF_STATE_DISCONNECTED;
info->handle = simple_strtoul(strrchr(dev->nodename, '/')+1, NULL, 0);
dev_set_drvdata(&dev->dev, info);
- err = talk_to_backend(dev, info);
+ err = talk_to_blkback(dev, info);
if (err) {
kfree(info);
dev_set_drvdata(&dev->dev, NULL);
blkif_free(info, info->connected == BLKIF_STATE_CONNECTED);
- err = talk_to_backend(dev, info);
+ err = talk_to_blkback(dev, info);
if (info->connected == BLKIF_STATE_SUSPENDED && !err)
err = blkif_recover(info);
return err;
}
+static void
+blkfront_closing(struct blkfront_info *info)
+{
+ struct xenbus_device *xbdev = info->xbdev;
+ struct block_device *bdev = NULL;
+
+ mutex_lock(&info->mutex);
+
+ if (xbdev->state == XenbusStateClosing) {
+ mutex_unlock(&info->mutex);
+ return;
+ }
+
+ if (info->gd)
+ bdev = bdget_disk(info->gd, 0);
+
+ mutex_unlock(&info->mutex);
+
+ if (!bdev) {
+ xenbus_frontend_closed(xbdev);
+ return;
+ }
+
+ mutex_lock(&bdev->bd_mutex);
+
+ if (bdev->bd_openers) {
+ xenbus_dev_error(xbdev, -EBUSY,
+ "Device in use; refusing to close");
+ xenbus_switch_state(xbdev, XenbusStateClosing);
+ } else {
+ xlvbd_release_gendisk(info);
+ xenbus_frontend_closed(xbdev);
+ }
+
+ mutex_unlock(&bdev->bd_mutex);
+ bdput(bdev);
+}
/*
* Invoked when the backend is finally 'ready' (and has told produced
unsigned long sector_size;
unsigned int binfo;
int err;
-
- if ((info->connected == BLKIF_STATE_CONNECTED) ||
- (info->connected == BLKIF_STATE_SUSPENDED) )
+ int barrier;
+
+ switch (info->connected) {
+ case BLKIF_STATE_CONNECTED:
+ /*
+ * Potentially, the back-end may be signalling
+ * a capacity change; update the capacity.
+ */
+ err = xenbus_scanf(XBT_NIL, info->xbdev->otherend,
+ "sectors", "%Lu", §ors);
+ if (XENBUS_EXIST_ERR(err))
+ return;
+ printk(KERN_INFO "Setting capacity to %Lu\n",
+ sectors);
+ set_capacity(info->gd, sectors);
+ revalidate_disk(info->gd);
+
+ /* fall through */
+ case BLKIF_STATE_SUSPENDED:
return;
+ default:
+ break;
+ }
+
dev_dbg(&info->xbdev->dev, "%s:%s.\n",
__func__, info->xbdev->otherend);
}
err = xenbus_gather(XBT_NIL, info->xbdev->otherend,
- "feature-barrier", "%lu", &info->feature_barrier,
+ "feature-barrier", "%lu", &barrier,
NULL);
+
+ /*
+ * If there's no "feature-barrier" defined, then it means
+ * we're dealing with a very old backend which writes
+ * synchronously; draining will do what needs to get done.
+ *
+ * If there are barriers, then we can do full queued writes
+ * with tagged barriers.
+ *
+ * If barriers are not supported, then there's no much we can
+ * do, so just set ordering to NONE.
+ */
if (err)
- info->feature_barrier = 0;
+ info->feature_barrier = QUEUE_ORDERED_DRAIN;
+ else if (barrier)
+ info->feature_barrier = QUEUE_ORDERED_TAG;
+ else
+ info->feature_barrier = QUEUE_ORDERED_NONE;
err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
if (err) {
info->is_ready = 1;
}
-/**
- * Handle the change of state of the backend to Closing. We must delete our
- * device-layer structures now, to ensure that writes are flushed through to
- * the backend. Once is this done, we can switch to Closed in
- * acknowledgement.
- */
-static void blkfront_closing(struct xenbus_device *dev)
-{
- struct blkfront_info *info = dev_get_drvdata(&dev->dev);
- unsigned long flags;
-
- dev_dbg(&dev->dev, "blkfront_closing: %s removed\n", dev->nodename);
-
- if (info->rq == NULL)
- goto out;
-
- spin_lock_irqsave(&blkif_io_lock, flags);
-
- /* No more blkif_request(). */
- blk_stop_queue(info->rq);
-
- /* No more gnttab callback work. */
- gnttab_cancel_free_callback(&info->callback);
- spin_unlock_irqrestore(&blkif_io_lock, flags);
-
- /* Flush gnttab callback work. Must be done with no locks held. */
- flush_scheduled_work();
-
- blk_cleanup_queue(info->rq);
- info->rq = NULL;
-
- del_gendisk(info->gd);
-
- out:
- xenbus_frontend_closed(dev);
-}
-
/**
* Callback received when the backend's state changes.
*/
-static void backend_changed(struct xenbus_device *dev,
+static void blkback_changed(struct xenbus_device *dev,
enum xenbus_state backend_state)
{
struct blkfront_info *info = dev_get_drvdata(&dev->dev);
- struct block_device *bd;
- dev_dbg(&dev->dev, "blkfront:backend_changed.\n");
+ dev_dbg(&dev->dev, "blkfront:blkback_changed to state %d.\n", backend_state);
switch (backend_state) {
case XenbusStateInitialising:
break;
case XenbusStateClosing:
- if (info->gd == NULL) {
- xenbus_frontend_closed(dev);
- break;
- }
- bd = bdget_disk(info->gd, 0);
- if (bd == NULL)
- xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
-
- mutex_lock(&bd->bd_mutex);
- if (info->users > 0)
- xenbus_dev_error(dev, -EBUSY,
- "Device in use; refusing to close");
- else
- blkfront_closing(dev);
- mutex_unlock(&bd->bd_mutex);
- bdput(bd);
+ blkfront_closing(info);
break;
}
}
-static int blkfront_remove(struct xenbus_device *dev)
+static int blkfront_remove(struct xenbus_device *xbdev)
{
- struct blkfront_info *info = dev_get_drvdata(&dev->dev);
+ struct blkfront_info *info = dev_get_drvdata(&xbdev->dev);
+ struct block_device *bdev = NULL;
+ struct gendisk *disk;
- dev_dbg(&dev->dev, "blkfront_remove: %s removed\n", dev->nodename);
+ dev_dbg(&xbdev->dev, "%s removed", xbdev->nodename);
blkif_free(info, 0);
- kfree(info);
+ mutex_lock(&info->mutex);
+
+ disk = info->gd;
+ if (disk)
+ bdev = bdget_disk(disk, 0);
+
+ info->xbdev = NULL;
+ mutex_unlock(&info->mutex);
+
+ if (!bdev) {
+ kfree(info);
+ return 0;
+ }
+
+ /*
+ * The xbdev was removed before we reached the Closed
+ * state. See if it's safe to remove the disk. If the bdev
+ * isn't closed yet, we let release take care of it.
+ */
+
+ mutex_lock(&bdev->bd_mutex);
+ info = disk->private_data;
+
+ dev_warn(disk_to_dev(disk),
+ "%s was hot-unplugged, %d stale handles\n",
+ xbdev->nodename, bdev->bd_openers);
+
+ if (info && !bdev->bd_openers) {
+ xlvbd_release_gendisk(info);
+ disk->private_data = NULL;
+ kfree(info);
+ }
+
+ mutex_unlock(&bdev->bd_mutex);
+ bdput(bdev);
return 0;
}
{
struct blkfront_info *info = dev_get_drvdata(&dev->dev);
- return info->is_ready;
+ return info->is_ready && info->xbdev;
}
static int blkif_open(struct block_device *bdev, fmode_t mode)
{
- struct blkfront_info *info = bdev->bd_disk->private_data;
- info->users++;
- return 0;
+ struct gendisk *disk = bdev->bd_disk;
+ struct blkfront_info *info;
+ int err = 0;
+
+ lock_kernel();
+
+ info = disk->private_data;
+ if (!info) {
+ /* xbdev gone */
+ err = -ERESTARTSYS;
+ goto out;
+ }
+
+ mutex_lock(&info->mutex);
+
+ if (!info->gd)
+ /* xbdev is closed */
+ err = -ERESTARTSYS;
+
+ mutex_unlock(&info->mutex);
+
+out:
+ unlock_kernel();
+ return err;
}
static int blkif_release(struct gendisk *disk, fmode_t mode)
{
struct blkfront_info *info = disk->private_data;
- info->users--;
- if (info->users == 0) {
- /* Check whether we have been instructed to close. We will
- have ignored this request initially, as the device was
- still mounted. */
- struct xenbus_device *dev = info->xbdev;
- enum xenbus_state state = xenbus_read_driver_state(dev->otherend);
-
- if (state == XenbusStateClosing && info->is_ready)
- blkfront_closing(dev);
+ struct block_device *bdev;
+ struct xenbus_device *xbdev;
+
+ lock_kernel();
+
+ bdev = bdget_disk(disk, 0);
+ bdput(bdev);
+
+ if (bdev->bd_openers)
+ goto out;
+
+ /*
+ * Check if we have been instructed to close. We will have
+ * deferred this request, because the bdev was still open.
+ */
+
+ mutex_lock(&info->mutex);
+ xbdev = info->xbdev;
+
+ if (xbdev && xbdev->state == XenbusStateClosing) {
+ /* pending switch to state closed */
+ dev_info(disk_to_dev(bdev->bd_disk), "releasing disk\n");
+ xlvbd_release_gendisk(info);
+ xenbus_frontend_closed(info->xbdev);
+ }
+
+ mutex_unlock(&info->mutex);
+
+ if (!xbdev) {
+ /* sudden device removal */
+ dev_info(disk_to_dev(bdev->bd_disk), "releasing disk\n");
+ xlvbd_release_gendisk(info);
+ disk->private_data = NULL;
+ kfree(info);
}
+
+out:
+ unlock_kernel();
return 0;
}
.open = blkif_open,
.release = blkif_release,
.getgeo = blkif_getgeo,
- .locked_ioctl = blkif_ioctl,
+ .ioctl = blkif_ioctl,
};
.probe = blkfront_probe,
.remove = blkfront_remove,
.resume = blkfront_resume,
- .otherend_changed = backend_changed,
+ .otherend_changed = blkback_changed,
.is_ready = blkfront_is_ready,
};
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/ata.h>
#include <linux/hdreg.h>
#include <linux/platform_device.h>
#if defined(CONFIG_OF)
+#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#endif
struct request *req;
while ((req = blk_peek_request(q)) != NULL) {
- if (blk_fs_request(req))
+ if (req->cmd_type == REQ_TYPE_FS)
break;
blk_start_request(req);
__blk_end_request_all(req, -EIO);
dev_dbg(ace->dev, "ace_open() users=%i\n", ace->users + 1);
+ lock_kernel();
spin_lock_irqsave(&ace->lock, flags);
ace->users++;
spin_unlock_irqrestore(&ace->lock, flags);
check_disk_change(bdev);
+ unlock_kernel();
+
return 0;
}
dev_dbg(ace->dev, "ace_release() users=%i\n", ace->users - 1);
+ lock_kernel();
spin_lock_irqsave(&ace->lock, flags);
ace->users--;
if (ace->users == 0) {
ace_out(ace, ACE_CTRL, val & ~ACE_CTRL_LOCKREQ);
}
spin_unlock_irqrestore(&ace->lock, flags);
+ unlock_kernel();
return 0;
}
#if defined(CONFIG_OF)
static int __devinit
-ace_of_probe(struct of_device *op, const struct of_device_id *match)
+ace_of_probe(struct platform_device *op, const struct of_device_id *match)
{
struct resource res;
resource_size_t physaddr;
return ace_alloc(&op->dev, id ? *id : 0, physaddr, irq, bus_width);
}
-static int __devexit ace_of_remove(struct of_device *op)
+static int __devexit ace_of_remove(struct platform_device *op)
{
ace_free(&op->dev);
return 0;
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/bitops.h>
+#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <asm/setup.h>
device = MINOR(bdev->bd_dev);
+ lock_kernel();
if ( current_device != -1 && current_device != device )
{
rc = -EBUSY;
set_capacity(z2ram_gendisk, z2ram_size >> 9);
}
+ unlock_kernel();
return 0;
err_out_kfree:
kfree(z2ram_map);
err_out:
+ unlock_kernel();
return rc;
}
static int
z2_release(struct gendisk *disk, fmode_t mode)
{
- if ( current_device == -1 )
- return 0;
-
+ lock_kernel();
+ if ( current_device == -1 ) {
+ unlock_kernel();
+ return 0;
+ }
+ unlock_kernel();
/*
* FIXME: unmap memory
*/
-------------------------------------------------------------------------*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define REVISION "Revision: 3.20"
#define VERSION "Id: cdrom.c 3.20 2003/12/17"
static const char *mrw_address_space[] = { "DMA", "GAA" };
#if (ERRLOGMASK!=CD_NOTHING)
-#define cdinfo(type, fmt, args...) \
- if ((ERRLOGMASK & type) || debug==1 ) \
- printk(KERN_INFO "cdrom: " fmt, ## args)
+#define cdinfo(type, fmt, args...) \
+do { \
+ if ((ERRLOGMASK & type) || debug == 1) \
+ pr_info(fmt, ##args); \
+} while (0)
#else
-#define cdinfo(type, fmt, args...)
+#define cdinfo(type, fmt, args...) \
+do { \
+ if (0 && (ERRLOGMASK & type) || debug == 1) \
+ pr_info(fmt, ##args); \
+} while (0)
#endif
/* These are used to simplify getting data in from and back to user land */
if (cdo->open == NULL || cdo->release == NULL)
return -EINVAL;
if (!banner_printed) {
- printk(KERN_INFO "Uniform CD-ROM driver " REVISION "\n");
+ pr_info("Uniform CD-ROM driver " REVISION "\n");
banner_printed = 1;
cdrom_sysctl_register();
}
unsigned char buffer[12];
int ret;
- printk(KERN_INFO "cdrom: %sstarting format\n", cont ? "Re" : "");
+ pr_info("%sstarting format\n", cont ? "Re" : "");
/*
* FmtData bit set (bit 4), format type is 1
ret = cdi->ops->generic_packet(cdi, &cgc);
if (ret)
- printk(KERN_INFO "cdrom: bgformat failed\n");
+ pr_info("bgformat failed\n");
return ret;
}
ret = 0;
if (di.mrw_status == CDM_MRW_BGFORMAT_ACTIVE) {
- printk(KERN_INFO "cdrom: issuing MRW back ground "
- "format suspend\n");
+ pr_info("issuing MRW background format suspend\n");
ret = cdrom_mrw_bgformat_susp(cdi, 0);
}
if ((ret = cdrom_mode_select(cdi, &cgc)))
return ret;
- printk(KERN_INFO "cdrom: %s: mrw address space %s selected\n", cdi->name, mrw_address_space[space]);
+ pr_info("%s: mrw address space %s selected\n",
+ cdi->name, mrw_address_space[space]);
return 0;
}
* always reset to DMA lba space on open
*/
if (cdrom_mrw_set_lba_space(cdi, MRW_LBA_DMA)) {
- printk(KERN_ERR "cdrom: failed setting lba address space\n");
+ pr_err("failed setting lba address space\n");
return 1;
}
* 3 - MRW formatting complete
*/
ret = 0;
- printk(KERN_INFO "cdrom open: mrw_status '%s'\n",
- mrw_format_status[di.mrw_status]);
+ pr_info("open: mrw_status '%s'\n", mrw_format_status[di.mrw_status]);
if (!di.mrw_status)
ret = 1;
else if (di.mrw_status == CDM_MRW_BGFORMAT_INACTIVE &&
return;
}
- printk(KERN_INFO "cdrom: %s: dirty DVD+RW media, \"finalizing\"\n",
- cdi->name);
+ pr_info("%s: dirty DVD+RW media, \"finalizing\"\n", cdi->name);
init_cdrom_command(&cgc, NULL, 0, CGC_DATA_NONE);
cgc.cmd[0] = GPCMD_FLUSH_CACHE;
* frame dma, so drop to single frame dma if we need to
*/
if (cdi->cdda_method == CDDA_BPC_FULL && nframes > 1) {
- printk("cdrom: dropping to single frame dma\n");
+ pr_info("dropping to single frame dma\n");
cdi->cdda_method = CDDA_BPC_SINGLE;
goto retry;
}
if (cdi->last_sense != 0x04 && cdi->last_sense != 0x0b)
return ret;
- printk("cdrom: dropping to old style cdda (sense=%x)\n", cdi->last_sense);
+ pr_info("dropping to old style cdda (sense=%x)\n", cdi->last_sense);
cdi->cdda_method = CDDA_OLD;
return cdrom_read_cdda_old(cdi, ubuf, lba, nframes);
}
"\t%d", CDROM_CAN(val) != 0);
break;
default:
- printk(KERN_INFO "cdrom: invalid option%d\n", option);
+ pr_info("invalid option%d\n", option);
return 1;
}
if (!ret)
mutex_unlock(&cdrom_mutex);
return proc_dostring(ctl, write, buffer, lenp, ppos);
done:
- printk(KERN_INFO "cdrom: info buffer too small\n");
+ pr_info("info buffer too small\n");
goto doit;
}
static void __exit cdrom_exit(void)
{
- printk(KERN_INFO "Uniform CD-ROM driver unloaded\n");
+ pr_info("Uniform CD-ROM driver unloaded\n");
cdrom_sysctl_unregister();
}
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/device.h>
+#include <linux/smp_lock.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
tocuse = 0;
err = gdrom_readtoc_cmd(gd.toc, 0);
if (err) {
- printk(KERN_INFO "GDROM: Could not get CD "
- "table of contents\n");
+ pr_info("Could not get CD table of contents\n");
return -ENXIO;
}
}
} while (track >= fentry);
if ((track > 100) || (track < get_entry_track(gd.toc->first))) {
- printk(KERN_INFO "GDROM: No data on the last "
- "session of the CD\n");
+ pr_info("No data on the last session of the CD\n");
gdrom_getsense(NULL);
return -ENXIO;
}
goto cleanup_sense;
insw(GDROM_DATA_REG, &sense, sense_command->buflen/2);
if (sense[1] & 40) {
- printk(KERN_INFO "GDROM: Drive not ready - command aborted\n");
+ pr_info("Drive not ready - command aborted\n");
goto cleanup_sense;
}
sense_key = sense[1] & 0x0F;
if (sense_key < ARRAY_SIZE(sense_texts))
- printk(KERN_INFO "GDROM: %s\n", sense_texts[sense_key].text);
+ pr_info("%s\n", sense_texts[sense_key].text);
else
- printk(KERN_ERR "GDROM: Unknown sense key: %d\n", sense_key);
+ pr_err("Unknown sense key: %d\n", sense_key);
if (bufstring) /* return addional sense data */
memcpy(bufstring, &sense[4], 2);
if (sense_key < 2)
static int gdrom_bdops_open(struct block_device *bdev, fmode_t mode)
{
- return cdrom_open(gd.cd_info, bdev, mode);
+ int ret;
+ lock_kernel();
+ ret = cdrom_open(gd.cd_info, bdev, mode);
+ unlock_kernel();
+ return ret;
}
static int gdrom_bdops_release(struct gendisk *disk, fmode_t mode)
{
+ lock_kernel();
cdrom_release(gd.cd_info, mode);
+ unlock_kernel();
return 0;
}
static int gdrom_bdops_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
- return cdrom_ioctl(gd.cd_info, bdev, mode, cmd, arg);
+ int ret;
+
+ lock_kernel();
+ ret = cdrom_ioctl(gd.cd_info, bdev, mode, cmd, arg);
+ unlock_kernel();
+
+ return ret;
}
static const struct block_device_operations gdrom_bdops = {
.open = gdrom_bdops_open,
.release = gdrom_bdops_release,
.media_changed = gdrom_bdops_mediachanged,
- .locked_ioctl = gdrom_bdops_ioctl,
+ .ioctl = gdrom_bdops_ioctl,
};
static irqreturn_t gdrom_command_interrupt(int irq, void *dev_id)
struct request *req;
while ((req = blk_fetch_request(rq)) != NULL) {
- if (!blk_fs_request(req)) {
- printk(KERN_DEBUG "GDROM: Non-fs request ignored\n");
+ if (req->cmd_type != REQ_TYPE_FS) {
+ printk(KERN_DEBUG "gdrom: Non-fs request ignored\n");
__blk_end_request_all(req, -EIO);
continue;
}
if (rq_data_dir(req) != READ) {
- printk(KERN_NOTICE "GDROM: Read only device -");
- printk(" write request ignored\n");
+ pr_notice("Read only device - write request ignored\n");
__blk_end_request_all(req, -EIO);
continue;
}
firmw_ver = kstrndup(id->firmver, 16, GFP_KERNEL);
if (!firmw_ver)
goto free_manuf_name;
- printk(KERN_INFO "GDROM: %s from %s with firmware %s\n",
+ pr_info("%s from %s with firmware %s\n",
model_name, manuf_name, firmw_ver);
err = 0;
kfree(firmw_ver);
int err;
/* Start the device */
if (gdrom_execute_diagnostic() != 1) {
- printk(KERN_WARNING "GDROM: ATA Probe for GDROM failed.\n");
+ pr_warning("ATA Probe for GDROM failed\n");
return -ENODEV;
}
/* Print out firmware ID */
gdrom_major = register_blkdev(0, GDROM_DEV_NAME);
if (gdrom_major <= 0)
return gdrom_major;
- printk(KERN_INFO "GDROM: Registered with major number %d\n",
+ pr_info("Registered with major number %d\n",
gdrom_major);
/* Specify basic properties of drive */
gd.cd_info = kzalloc(sizeof(struct cdrom_device_info), GFP_KERNEL);
unregister_blkdev(gdrom_major, GDROM_DEV_NAME);
gdrom_major = 0;
probe_fail_no_mem:
- printk(KERN_WARNING "GDROM: Probe failed - error is 0x%X\n", err);
+ pr_warning("Probe failed - error is 0x%X\n", err);
return err;
}
* the OS/400 partition.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/major.h>
#include <linux/blkdev.h>
#include <linux/cdrom.h>
#include <linux/module.h>
#include <linux/completion.h>
#include <linux/proc_fs.h>
+#include <linux/smp_lock.h>
#include <linux/seq_file.h>
#include <linux/scatterlist.h>
#define VIOCD_VERS "1.06"
-#define VIOCD_KERN_WARNING KERN_WARNING "viocd: "
-#define VIOCD_KERN_INFO KERN_INFO "viocd: "
-
/*
* Should probably make this a module parameter....sigh
*/
static int viocd_blk_open(struct block_device *bdev, fmode_t mode)
{
struct disk_info *di = bdev->bd_disk->private_data;
- return cdrom_open(&di->viocd_info, bdev, mode);
+ int ret;
+
+ lock_kernel();
+ ret = cdrom_open(&di->viocd_info, bdev, mode);
+ unlock_kernel();
+
+ return ret;
}
static int viocd_blk_release(struct gendisk *disk, fmode_t mode)
{
struct disk_info *di = disk->private_data;
+ lock_kernel();
cdrom_release(&di->viocd_info, mode);
+ unlock_kernel();
return 0;
}
unsigned cmd, unsigned long arg)
{
struct disk_info *di = bdev->bd_disk->private_data;
- return cdrom_ioctl(&di->viocd_info, bdev, mode, cmd, arg);
+ int ret;
+
+ lock_kernel();
+ ret = cdrom_ioctl(&di->viocd_info, bdev, mode, cmd, arg);
+ unlock_kernel();
+
+ return ret;
}
static int viocd_blk_media_changed(struct gendisk *disk)
.owner = THIS_MODULE,
.open = viocd_blk_open,
.release = viocd_blk_release,
- .locked_ioctl = viocd_blk_ioctl,
+ .ioctl = viocd_blk_ioctl,
.media_changed = viocd_blk_media_changed,
};
(u64)&we, VIOVERSION << 16, ((u64)device_no << 48),
0, 0, 0);
if (hvrc != 0) {
- printk(VIOCD_KERN_WARNING
- "bad rc on HvCallEvent_signalLpEventFast %d\n",
- (int)hvrc);
+ pr_warning("bad rc on HvCallEvent_signalLpEventFast %d\n",
+ (int)hvrc);
return -EIO;
}
if (we.rc) {
const struct vio_error_entry *err =
vio_lookup_rc(viocd_err_table, we.sub_result);
- printk(VIOCD_KERN_WARNING "bad rc %d:0x%04X on open: %s\n",
- we.rc, we.sub_result, err->msg);
+ pr_warning("bad rc %d:0x%04X on open: %s\n",
+ we.rc, we.sub_result, err->msg);
return -err->errno;
}
viopath_targetinst(viopath_hostLp), 0,
VIOVERSION << 16, ((u64)device_no << 48), 0, 0, 0);
if (hvrc != 0)
- printk(VIOCD_KERN_WARNING
- "bad rc on HvCallEvent_signalLpEventFast %d\n",
- (int)hvrc);
+ pr_warning("bad rc on HvCallEvent_signalLpEventFast %d\n",
+ (int)hvrc);
}
/* Send a read or write request to OS/400 */
sg_init_table(&sg, 1);
if (blk_rq_map_sg(req->q, req, &sg) == 0) {
- printk(VIOCD_KERN_WARNING
- "error setting up scatter/gather list\n");
+ pr_warning("error setting up scatter/gather list\n");
return -1;
}
if (dma_map_sg(diskinfo->dev, &sg, 1, direction) == 0) {
- printk(VIOCD_KERN_WARNING "error allocating sg tce\n");
+ pr_warning("error allocating sg tce\n");
return -1;
}
dmaaddr = sg_dma_address(&sg);
((u64)DEVICE_NR(diskinfo) << 48) | dmaaddr,
(u64)blk_rq_pos(req) * 512, len, 0);
if (hvrc != HvLpEvent_Rc_Good) {
- printk(VIOCD_KERN_WARNING "hv error on op %d\n", (int)hvrc);
+ pr_warning("hv error on op %d\n", (int)hvrc);
return -1;
}
struct request *req;
while ((rwreq == 0) && ((req = blk_fetch_request(q)) != NULL)) {
- if (!blk_fs_request(req))
+ if (req->cmd_type != REQ_TYPE_FS)
__blk_end_request_all(req, -EIO);
else if (send_request(req) < 0) {
- printk(VIOCD_KERN_WARNING
- "unable to send message to OS/400!");
+ pr_warning("unable to send message to OS/400!\n");
__blk_end_request_all(req, -EIO);
} else
rwreq++;
(u64)&we, VIOVERSION << 16, ((u64)device_no << 48),
0, 0, 0);
if (hvrc != 0) {
- printk(VIOCD_KERN_WARNING "bad rc on HvCallEvent_signalLpEventFast %d\n",
- (int)hvrc);
+ pr_warning("bad rc on HvCallEvent_signalLpEventFast %d\n",
+ (int)hvrc);
return -EIO;
}
if (we.rc) {
const struct vio_error_entry *err =
vio_lookup_rc(viocd_err_table, we.sub_result);
- printk(VIOCD_KERN_WARNING
- "bad rc %d:0x%04X on check_change: %s; Assuming no change\n",
- we.rc, we.sub_result, err->msg);
+ pr_warning("bad rc %d:0x%04X on check_change: %s; Assuming no change\n",
+ we.rc, we.sub_result, err->msg);
return 0;
}
(u64)&we, VIOVERSION << 16,
(device_no << 48) | (flags << 32), 0, 0, 0);
if (hvrc != 0) {
- printk(VIOCD_KERN_WARNING "bad rc on HvCallEvent_signalLpEventFast %d\n",
- (int)hvrc);
+ pr_warning("bad rc on HvCallEvent_signalLpEventFast %d\n",
+ (int)hvrc);
return -EIO;
}
return;
/* First, we should NEVER get an int here...only acks */
if (hvlpevent_is_int(event)) {
- printk(VIOCD_KERN_WARNING
- "Yikes! got an int in viocd event handler!\n");
+ pr_warning("Yikes! got an int in viocd event handler!\n");
if (hvlpevent_need_ack(event)) {
event->xRc = HvLpEvent_Rc_InvalidSubtype;
HvCallEvent_ackLpEvent(event);
const struct vio_error_entry *err =
vio_lookup_rc(viocd_err_table,
bevent->sub_result);
- printk(VIOCD_KERN_WARNING "request %p failed "
- "with rc %d:0x%04X: %s\n",
- req, event->xRc,
- bevent->sub_result, err->msg);
+ pr_warning("request %p failed with rc %d:0x%04X: %s\n",
+ req, event->xRc,
+ bevent->sub_result, err->msg);
__blk_end_request_all(req, -EIO);
} else
__blk_end_request_all(req, 0);
break;
default:
- printk(VIOCD_KERN_WARNING
- "message with invalid subtype %0x04X!\n",
- event->xSubtype & VIOMINOR_SUBTYPE_MASK);
+ pr_warning("message with invalid subtype %0x04X!\n",
+ event->xSubtype & VIOMINOR_SUBTYPE_MASK);
if (hvlpevent_need_ack(event)) {
event->xRc = HvLpEvent_Rc_InvalidSubtype;
HvCallEvent_ackLpEvent(event);
sprintf(c->name, VIOCD_DEVICE "%c", 'a' + deviceno);
if (register_cdrom(c) != 0) {
- printk(VIOCD_KERN_WARNING "Cannot register viocd CD-ROM %s!\n",
- c->name);
+ pr_warning("Cannot register viocd CD-ROM %s!\n", c->name);
goto out;
}
- printk(VIOCD_KERN_INFO "cd %s is iSeries resource %10.10s "
- "type %4.4s, model %3.3s\n",
- c->name, d->rsrcname, d->type, d->model);
+ pr_info("cd %s is iSeries resource %10.10s type %4.4s, model %3.3s\n",
+ c->name, d->rsrcname, d->type, d->model);
q = blk_init_queue(do_viocd_request, &viocd_reqlock);
if (q == NULL) {
- printk(VIOCD_KERN_WARNING "Cannot allocate queue for %s!\n",
- c->name);
+ pr_warning("Cannot allocate queue for %s!\n", c->name);
goto out_unregister_cdrom;
}
gendisk = alloc_disk(1);
if (gendisk == NULL) {
- printk(VIOCD_KERN_WARNING "Cannot create gendisk for %s!\n",
- c->name);
+ pr_warning("Cannot create gendisk for %s!\n", c->name);
goto out_cleanup_queue;
}
gendisk->major = VIOCD_MAJOR;
return -ENODEV;
}
- printk(VIOCD_KERN_INFO "vers " VIOCD_VERS ", hosting partition %d\n",
- viopath_hostLp);
+ pr_info("vers " VIOCD_VERS ", hosting partition %d\n", viopath_hostLp);
if (register_blkdev(VIOCD_MAJOR, VIOCD_DEVICE) != 0) {
- printk(VIOCD_KERN_WARNING "Unable to get major %d for %s\n",
- VIOCD_MAJOR, VIOCD_DEVICE);
+ pr_warning("Unable to get major %d for %s\n",
+ VIOCD_MAJOR, VIOCD_DEVICE);
return -EIO;
}
ret = viopath_open(viopath_hostLp, viomajorsubtype_cdio,
MAX_CD_REQ + 2);
if (ret) {
- printk(VIOCD_KERN_WARNING
- "error opening path to host partition %d\n",
- viopath_hostLp);
+ pr_warning("error opening path to host partition %d\n",
+ viopath_hostLp);
goto out_unregister;
}
config PC8736x_GPIO
tristate "NatSemi PC8736x GPIO Support"
- depends on X86
+ depends on X86_32
default SCx200_GPIO # mostly N
select NSC_GPIO # needed for support routines
help
obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o tty_port.o
+obj-y += tty_mutex.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
obj-y += misc.o
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
- lock_kernel();
+ tty_lock();
tmp.type = state->type;
tmp.line = state->line;
tmp.port = state->port;
tmp.close_delay = state->close_delay;
tmp.closing_wait = state->closing_wait;
tmp.custom_divisor = state->custom_divisor;
- unlock_kernel();
+ tty_unlock();
if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
return -EFAULT;
return 0;
if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
return -EFAULT;
- lock_kernel();
+ tty_lock();
state = info->state;
old_state = *state;
change_irq = new_serial.irq != state->irq;
change_port = (new_serial.port != state->port);
if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size)) {
- unlock_kernel();
+ tty_unlock();
return -EINVAL;
}
}
if (new_serial.baud_base < 9600) {
- unlock_kernel();
+ tty_unlock();
return -EINVAL;
}
}
} else
retval = startup(info);
- unlock_kernel();
+ tty_unlock();
return retval;
}
{
struct async_struct * info = tty->driver_data;
unsigned long orig_jiffies, char_time;
+ int tty_was_locked = tty_locked();
int lsr;
if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
orig_jiffies = jiffies;
- lock_kernel();
+ /*
+ * tty_wait_until_sent is called from lots of places,
+ * with or without the BTM.
+ */
+ if (!tty_was_locked)
+ tty_lock();
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
break;
}
__set_current_state(TASK_RUNNING);
- unlock_kernel();
+ if (!tty_was_locked)
+ tty_unlock();
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
printk("block_til_ready blocking: ttys%d, count = %d\n",
info->line, state->count);
#endif
+ tty_unlock();
schedule();
+ tty_lock();
}
__set_current_state(TASK_RUNNING);
remove_wait_queue(&info->open_wait, &wait);
static int briq_panel_open(struct inode *ino, struct file *filep)
{
- lock_kernel();
+ tty_lock();
/* enforce single access, vfd_is_open is protected by BKL */
if (vfd_is_open) {
- unlock_kernel();
+ tty_unlock();
return -EBUSY;
}
vfd_is_open = 1;
- unlock_kernel();
+ tty_unlock();
return 0;
}
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
-#include <linux/smp_lock.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/fcntl.h>
* If the port is the middle of closing, bail out now
*/
if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
- wait_event_interruptible(info->port.close_wait,
+ wait_event_interruptible_tty(info->port.close_wait,
!(info->port.flags & ASYNC_CLOSING));
return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
return; /* Just in case.... */
orig_jiffies = jiffies;
- lock_kernel();
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
}
/* Run one more char cycle */
msleep_interruptible(jiffies_to_msecs(char_time * 5));
- unlock_kernel();
#ifdef CY_DEBUG_WAIT_UNTIL_SENT
printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies);
#endif
int char_count;
__u32 tx_put, tx_get, tx_bufsize;
- lock_kernel();
tx_get = readl(&buf_ctrl->tx_get);
tx_put = readl(&buf_ctrl->tx_put);
tx_bufsize = readl(&buf_ctrl->tx_bufsize);
printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
info->line, info->xmit_cnt + char_count);
#endif
- unlock_kernel();
return info->xmit_cnt + char_count;
}
#endif /* Z_EXT_CHARS_IN_BUFFER */
struct serial_struct __user *new_info)
{
struct serial_struct new_serial;
+ int ret;
if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
return -EFAULT;
+ mutex_lock(&info->port.mutex);
if (!capable(CAP_SYS_ADMIN)) {
if (new_serial.close_delay != info->port.close_delay ||
new_serial.baud_base != info->baud ||
(new_serial.flags & ASYNC_FLAGS &
~ASYNC_USR_MASK) !=
(info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
+ {
+ mutex_unlock(&info->port.mutex);
return -EPERM;
+ }
info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK);
info->baud = new_serial.baud_base;
check_and_exit:
if (info->port.flags & ASYNC_INITIALIZED) {
cy_set_line_char(info, tty);
- return 0;
+ ret = 0;
} else {
- return cy_startup(info, tty);
+ ret = cy_startup(info, tty);
}
+ mutex_unlock(&info->port.mutex);
+ return ret;
} /* set_serial_info */
/*
card = info->card;
- lock_kernel();
if (!cy_is_Z(card)) {
unsigned long flags;
int channel = info->line - card->first_line;
((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
}
end:
- unlock_kernel();
return result;
} /* cy_tiomget */
printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
info->line, cmd, arg);
#endif
- lock_kernel();
switch (cmd) {
case CYGETMON:
default:
ret_val = -ENOIOCTLCMD;
}
- unlock_kernel();
#ifdef CY_DEBUG_OTHER
printk(KERN_DEBUG "cyc:cy_ioctl done\n");
#include <linux/ctype.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/uaccess.h>
break;
case DIGI_SETAW:
case DIGI_SETAF:
- lock_kernel();
if (cmd == DIGI_SETAW) {
/* Setup an event to indicate when the transmit
buffer empties */
if (tty->ldisc->ops->flush_buffer)
tty->ldisc->ops->flush_buffer(tty);
}
- unlock_kernel();
/* Fall Thru */
case DIGI_SETA:
if (copy_from_user(&ch->digiext, argp, sizeof(digi_t)))
* Note: If it is called early in the boot process, @val is stored and
* parsed later in hvc_iucv_init().
*/
-static int param_set_vmidfilter(const char *val, struct kernel_param *kp)
+static int param_set_vmidfilter(const char *val, const struct kernel_param *kp)
{
int rc;
* The function stores the filter as a comma-separated list of z/VM user IDs
* in @buffer. Typically, sysfs routines call this function for attr show.
*/
-static int param_get_vmidfilter(char *buffer, struct kernel_param *kp)
+static int param_get_vmidfilter(char *buffer, const struct kernel_param *kp)
{
int rc;
size_t index, len;
#define param_check_vmidfilter(name, p) __param_check(name, p, void)
+static struct kernel_param_ops param_ops_vmidfilter = {
+ .set = param_set_vmidfilter,
+ .get = param_get_vmidfilter,
+};
+
/**
* hvc_iucv_init() - z/VM IUCV HVC device driver initialization
*/
pr_info("%s", version);
}
-static int __devinit n2rng_probe(struct of_device *op,
+static int __devinit n2rng_probe(struct platform_device *op,
const struct of_device_id *match)
{
int victoria_falls = (match->data != NULL);
return err;
}
-static int __devexit n2rng_remove(struct of_device *op)
+static int __devexit n2rng_remove(struct platform_device *op)
{
struct n2rng *np = dev_get_drvdata(&op->dev);
};
struct n2rng {
- struct of_device *op;
+ struct platform_device *op;
unsigned long flags;
#define N2RNG_FLAG_VF 0x00000001 /* Victoria Falls RNG, else N2 */
.data_read = pasemi_rng_data_read,
};
-static int __devinit rng_probe(struct of_device *ofdev,
+static int __devinit rng_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
void __iomem *rng_regs;
return err;
}
-static int __devexit rng_remove(struct of_device *dev)
+static int __devexit rng_remove(struct platform_device *dev)
{
void __iomem *rng_regs = (void __iomem *)pasemi_rng.priv;
if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) {
if ( pCh->flags & ASYNC_CLOSING ) {
+ tty_unlock();
schedule();
+ tty_lock();
}
if ( tty_hung_up_p(pFile) ) {
set_current_state( TASK_RUNNING );
rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS);
break;
}
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state( TASK_RUNNING );
remove_wait_queue(&pCh->open_wait, &wait);
info->irq_setup = std_irq_setup;
info->slave_addr = ipmb;
- if (!add_smi(info))
+ if (!add_smi(info)) {
if (try_smi_init(info))
cleanup_one_si(info);
+ } else {
+ kfree(info);
+ }
} else {
/* remove */
struct smi_info *e, *tmp_e;
info->irq_setup = std_irq_setup;
info->slave_addr = slave_addrs[i];
- if (!add_smi(info))
+ if (!add_smi(info)) {
if (try_smi_init(info))
cleanup_one_si(info);
+ } else {
+ kfree(info);
+ }
}
}
/*
* Defined at
- * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/
- * Docs/TechPapers/IA64/hpspmi.pdf
+ * http://h21007.www2.hp.com/portal/download/files
+ * /unprot/hpspmi.pdf
*/
struct SPMITable {
s8 Signature[4];
static __devinit int try_init_spmi(struct SPMITable *spmi)
{
struct smi_info *info;
- u8 addr_space;
if (spmi->IPMIlegacy != 1) {
printk(KERN_INFO PFX "Bad SPMI legacy %d\n", spmi->IPMIlegacy);
return -ENODEV;
}
- if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
- addr_space = IPMI_MEM_ADDR_SPACE;
- else
- addr_space = IPMI_IO_ADDR_SPACE;
-
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
printk(KERN_ERR PFX "Could not allocate SI data (3)\n");
}
info->io.addr_data = spmi->addr.address;
- add_smi(info);
+ pr_info("ipmi_si: SPMI: %s %#lx regsize %d spacing %d irq %d\n",
+ (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
+ info->io.addr_data, info->io.regsize, info->io.regspacing,
+ info->irq);
+
+ if (add_smi(info))
+ kfree(info);
return 0;
}
res, info->io.regsize, info->io.regspacing,
info->irq);
- return add_smi(info);
+ if (add_smi(info))
+ goto err_free;
+
+ return 0;
err_free:
kfree(info);
if (info->irq)
info->irq_setup = std_irq_setup;
- add_smi(info);
+ pr_info("ipmi_si: SMBIOS: %s %#lx regsize %d spacing %d irq %d\n",
+ (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
+ info->io.addr_data, info->io.regsize, info->io.regspacing,
+ info->irq);
+
+ if (add_smi(info))
+ kfree(info);
}
static void __devinit dmi_find_bmc(void)
&pdev->resource[0], info->io.regsize, info->io.regspacing,
info->irq);
- return add_smi(info);
+ if (add_smi(info))
+ kfree(info);
+
+ return 0;
}
static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
#ifdef CONFIG_PPC_OF
-static int __devinit ipmi_of_probe(struct of_device *dev,
+static int __devinit ipmi_of_probe(struct platform_device *dev,
const struct of_device_id *match)
{
struct smi_info *info;
dev_set_drvdata(&dev->dev, info);
- return add_smi(info);
+ if (add_smi(info)) {
+ kfree(info);
+ return -EBUSY;
+ }
+
+ return 0;
}
-static int __devexit ipmi_of_remove(struct of_device *dev)
+static int __devexit ipmi_of_remove(struct platform_device *dev)
{
cleanup_one_si(dev_get_drvdata(&dev->dev));
return 0;
info->io.addr_data);
} else
cleanup_one_si(info);
+ } else {
+ kfree(info);
}
}
}
si_to_str[new_smi->si_type]);
mutex_lock(&smi_infos_lock);
if (!is_new_interface(new_smi)) {
- printk(KERN_CONT PFX "duplicate interface\n");
+ printk(KERN_CONT " duplicate interface\n");
rv = -EBUSY;
goto out_err;
}
*/
static int start_now;
-static int set_param_int(const char *val, struct kernel_param *kp)
+static int set_param_timeout(const char *val, const struct kernel_param *kp)
{
char *endp;
int l;
return rv;
}
-static int get_param_int(char *buffer, struct kernel_param *kp)
-{
- return sprintf(buffer, "%i", *((int *)kp->arg));
-}
+static struct kernel_param_ops param_ops_timeout = {
+ .set = set_param_timeout,
+ .get = param_get_int,
+};
+#define param_check_timeout param_check_int
typedef int (*action_fn)(const char *intval, char *outval);
static int preop_op(const char *inval, char *outval);
static void check_parms(void);
-static int set_param_str(const char *val, struct kernel_param *kp)
+static int set_param_str(const char *val, const struct kernel_param *kp)
{
action_fn fn = (action_fn) kp->arg;
int rv = 0;
return rv;
}
-static int get_param_str(char *buffer, struct kernel_param *kp)
+static int get_param_str(char *buffer, const struct kernel_param *kp)
{
action_fn fn = (action_fn) kp->arg;
int rv;
}
-static int set_param_wdog_ifnum(const char *val, struct kernel_param *kp)
+static int set_param_wdog_ifnum(const char *val, const struct kernel_param *kp)
{
int rv = param_set_int(val, kp);
if (rv)
return 0;
}
-module_param_call(ifnum_to_use, set_param_wdog_ifnum, get_param_int,
- &ifnum_to_use, 0644);
+static struct kernel_param_ops param_ops_wdog_ifnum = {
+ .set = set_param_wdog_ifnum,
+ .get = param_get_int,
+};
+
+#define param_check_wdog_ifnum param_check_int
+
+static struct kernel_param_ops param_ops_str = {
+ .set = set_param_str,
+ .get = get_param_str,
+};
+
+module_param(ifnum_to_use, wdog_ifnum, 0644);
MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog "
"timer. Setting to -1 defaults to the first registered "
"interface");
-module_param_call(timeout, set_param_int, get_param_int, &timeout, 0644);
+module_param(timeout, timeout, 0644);
MODULE_PARM_DESC(timeout, "Timeout value in seconds.");
-module_param_call(pretimeout, set_param_int, get_param_int, &pretimeout, 0644);
+module_param(pretimeout, timeout, 0644);
MODULE_PARM_DESC(pretimeout, "Pretimeout value in seconds.");
-module_param_call(action, set_param_str, get_param_str, action_op, 0644);
+module_param_cb(action, ¶m_ops_str, action_op, 0644);
MODULE_PARM_DESC(action, "Timeout action. One of: "
"reset, none, power_cycle, power_off.");
-module_param_call(preaction, set_param_str, get_param_str, preaction_op, 0644);
+module_param_cb(preaction, ¶m_ops_str, preaction_op, 0644);
MODULE_PARM_DESC(preaction, "Pretimeout action. One of: "
"pre_none, pre_smi, pre_nmi, pre_int.");
-module_param_call(preop, set_param_str, get_param_str, preop_op, 0644);
+module_param_cb(preop, ¶m_ops_str, preop_op, 0644);
MODULE_PARM_DESC(preop, "Pretimeout driver operation. One of: "
"preop_none, preop_panic, preop_give_data.");
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/serial.h>
-#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
static int isicom_open(struct tty_struct *tty, struct file *filp)
{
struct isi_port *port;
- struct isi_board *card;
struct tty_port *tport;
tport = isicom_find_port(tty);
if (copy_from_user(&newinfo, info, sizeof(newinfo)))
return -EFAULT;
- lock_kernel();
-
+ mutex_lock(&port->port.mutex);
reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) !=
(newinfo.flags & ASYNC_SPD_MASK));
(newinfo.closing_wait != port->port.closing_wait) ||
((newinfo.flags & ~ASYNC_USR_MASK) !=
(port->port.flags & ~ASYNC_USR_MASK))) {
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
return -EPERM;
}
port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
isicom_config_port(tty);
spin_unlock_irqrestore(&port->card->card_lock, flags);
}
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
return 0;
}
{
struct serial_struct out_info;
- lock_kernel();
+ mutex_lock(&port->port.mutex);
memset(&out_info, 0, sizeof(out_info));
/* out_info.type = ? */
out_info.line = port - isi_ports;
/* out_info.baud_base = ? */
out_info.close_delay = port->port.close_delay;
out_info.closing_wait = port->port.closing_wait;
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
if (copy_to_user(info, &out_info, sizeof(out_info)))
return -EFAULT;
return 0;
* the board has been detected, and whether it is actually running a slave
* or not.
*/
-#define BST_FOUND 0x1
-#define BST_STARTED 0x2
-#define BST_PROBED 0x4
+#define BST_FOUND 0
+#define BST_STARTED 1
+#define BST_PROBED 2
/*
* Define the set of port state flags. These are marked for internal
brdp = stli_brds[brdnr];
if (brdp == NULL)
return -ENODEV;
- if ((brdp->state & BST_STARTED) == 0)
+ if (!test_bit(BST_STARTED, &brdp->state))
return -ENODEV;
portnr = MINOR2PORT(minordev);
if (portnr > brdp->nrports)
* order of opens and closes may not be preserved across shared
* memory, so we must wait until it is complete.
*/
- wait_event_interruptible(portp->raw_wait,
+ wait_event_interruptible_tty(portp->raw_wait,
!test_bit(ST_CLOSING, &portp->state));
if (signal_pending(current)) {
return -ERESTARTSYS;
set_bit(ST_OPENING, &portp->state);
spin_unlock_irqrestore(&brd_lock, flags);
- wait_event_interruptible(portp->raw_wait,
+ wait_event_interruptible_tty(portp->raw_wait,
!test_bit(ST_OPENING, &portp->state));
if (signal_pending(current))
rc = -ERESTARTSYS;
* occurs on this port.
*/
if (wait) {
- wait_event_interruptible(portp->raw_wait,
+ wait_event_interruptible_tty(portp->raw_wait,
!test_bit(ST_CLOSING, &portp->state));
if (signal_pending(current)) {
return -ERESTARTSYS;
* to come back.
*/
rc = 0;
- wait_event_interruptible(portp->raw_wait,
+ wait_event_interruptible_tty(portp->raw_wait,
!test_bit(ST_CLOSING, &portp->state));
if (signal_pending(current))
rc = -ERESTARTSYS;
static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
{
+ /*
+ * no need for wait_event_tty because clearing ST_CMDING cannot block
+ * on BTM
+ */
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_CMDING, &portp->state));
if (signal_pending(current))
rc = stli_portcmdstats(NULL, portp);
uart = "UNKNOWN";
- if (brdp->state & BST_STARTED) {
+ if (test_bit(BST_STARTED, &brdp->state)) {
switch (stli_comstats.hwid) {
case 0: uart = "2681"; break;
case 1: uart = "SC26198"; break;
}
seq_printf(m, "%d: uart:%s ", portnr, uart);
- if ((brdp->state & BST_STARTED) && (rc >= 0)) {
+ if (test_bit(BST_STARTED, &brdp->state) && rc >= 0) {
char sep;
seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal,
brdp = stli_brds[brdnr];
if (brdp == NULL)
continue;
- if ((brdp->state & BST_STARTED) == 0)
+ if (!test_bit(BST_STARTED, &brdp->state))
continue;
spin_lock(&brd_lock);
}
- brdp->state |= BST_FOUND;
+ set_bit(BST_FOUND, &brdp->state);
return 0;
err_unmap:
iounmap(brdp->membase);
brdp->panels[0] = brdp->nrports;
- brdp->state |= BST_FOUND;
+ set_bit(BST_FOUND, &brdp->state);
return 0;
err_unmap:
iounmap(brdp->membase);
spin_unlock_irqrestore(&brd_lock, flags);
if (rc == 0)
- brdp->state |= BST_STARTED;
+ set_bit(BST_STARTED, &brdp->state);
if (! stli_timeron) {
stli_timeron++;
if (retval)
goto err_null;
- brdp->state |= BST_PROBED;
+ set_bit(BST_PROBED, &brdp->state);
pci_set_drvdata(pdev, brdp);
EBRDENABLE(brdp);
brdp = stli_brds[i];
if (brdp == NULL)
continue;
- if (brdp->state & BST_FOUND) {
+ if (test_bit(BST_FOUND, &brdp->state)) {
EBRDENABLE(brdp);
brdp->enable = NULL;
brdp->disable = NULL;
return -ENODEV;
memset(&stli_brdstats, 0, sizeof(combrd_t));
+
stli_brdstats.brd = brdp->brdnr;
stli_brdstats.type = brdp->brdtype;
stli_brdstats.hwid = 0;
if (brdp == NULL)
return -ENODEV;
- if (brdp->state & BST_STARTED) {
+ mutex_lock(&portp->port.mutex);
+ if (test_bit(BST_STARTED, &brdp->state)) {
if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS,
- &stli_cdkstats, sizeof(asystats_t), 1)) < 0)
+ &stli_cdkstats, sizeof(asystats_t), 1)) < 0) {
+ mutex_unlock(&portp->port.mutex);
return rc;
+ }
} else {
memset(&stli_cdkstats, 0, sizeof(asystats_t));
}
stli_comstats.modem = stli_cdkstats.dcdcnt;
stli_comstats.hwid = stli_cdkstats.hwid;
stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals);
+ mutex_unlock(&portp->port.mutex);
return 0;
}
if (!brdp)
return -ENODEV;
- if (brdp->state & BST_STARTED) {
- if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0)
+ mutex_lock(&portp->port.mutex);
+
+ if (test_bit(BST_STARTED, &brdp->state)) {
+ if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) {
+ mutex_unlock(&portp->port.mutex);
return rc;
+ }
}
memset(&stli_comstats, 0, sizeof(comstats_t));
stli_comstats.brd = portp->brdnr;
stli_comstats.panel = portp->panelnr;
stli_comstats.port = portp->portnr;
+ mutex_unlock(&portp->port.mutex);
if (copy_to_user(cp, &stli_comstats, sizeof(comstats_t)))
return -EFAULT;
done = 0;
rc = 0;
- lock_kernel();
-
switch (cmd) {
case COM_GETPORTSTATS:
rc = stli_getportstats(NULL, NULL, argp);
done++;
break;
}
- unlock_kernel();
-
if (done)
return rc;
if (brdp->state == 0)
return -ENODEV;
- lock_kernel();
-
switch (cmd) {
case STL_BINTR:
EBRDINTR(brdp);
rc = stli_startbrd(brdp);
break;
case STL_BSTOP:
- brdp->state &= ~BST_STARTED;
+ clear_bit(BST_STARTED, &brdp->state);
break;
case STL_BRESET:
- brdp->state &= ~BST_STARTED;
+ clear_bit(BST_STARTED, &brdp->state);
EBRDRESET(brdp);
if (stli_shared == 0) {
if (brdp->reenable != NULL)
rc = -ENOIOCTLCMD;
break;
}
- unlock_kernel();
return rc;
}
unsigned int j;
for (j = 0; (j < stli_nrbrds); j++) {
- if ((brdp = stli_brds[j]) == NULL || (brdp->state & BST_PROBED))
+ if ((brdp = stli_brds[j]) == NULL ||
+ test_bit(BST_PROBED, &brdp->state))
continue;
stli_cleanup_ports(brdp);
*/
static void put_queue(struct vc_data *vc, int ch)
{
- struct tty_struct *tty = vc->vc_tty;
+ struct tty_struct *tty = vc->port.tty;
if (tty) {
tty_insert_flip_char(tty, ch, 0);
static void puts_queue(struct vc_data *vc, char *cp)
{
- struct tty_struct *tty = vc->vc_tty;
+ struct tty_struct *tty = vc->port.tty;
if (!tty)
return;
static void fn_hold(struct vc_data *vc)
{
- struct tty_struct *tty = vc->vc_tty;
+ struct tty_struct *tty = vc->port.tty;
if (rep || !tty)
return;
static void fn_send_intr(struct vc_data *vc)
{
- struct tty_struct *tty = vc->vc_tty;
+ struct tty_struct *tty = vc->port.tty;
if (!tty)
return;
struct keyboard_notifier_param param = { .vc = vc, .value = keycode, .down = down };
int rc;
- tty = vc->vc_tty;
+ tty = vc->port.tty;
if (tty && (!tty->driver_data)) {
/* No driver data? Strange. Okay we fix it then. */
port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
port->icount.tx += (cnt - port->xmit_cnt);
- if (port->xmit_cnt < WAKEUP_CHARS && tty)
+ if (port->xmit_cnt < WAKEUP_CHARS)
tty_wakeup(tty);
if (port->xmit_cnt <= 0) {
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
-#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/mm.h>
#include <linux/string.h>
else
len = gsm_dlci_data_output_framed(gsm, dlci);
if (len < 0)
- return;
+ break;
/* DLCI empty - try the next */
if (len == 0)
i++;
return -EFAULT;
}
- lock_kernel();
+ tty_lock();
for (;;) {
if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
- unlock_kernel();
+ tty_unlock();
return -EIO;
}
n_hdlc = tty2n_hdlc (tty);
if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
tty != n_hdlc->tty) {
- unlock_kernel();
+ tty_unlock();
return 0;
}
/* no data */
if (file->f_flags & O_NONBLOCK) {
- unlock_kernel();
+ tty_unlock();
return -EAGAIN;
}
interruptible_sleep_on (&tty->read_wait);
if (signal_pending(current)) {
- unlock_kernel();
+ tty_unlock();
return -EINTR;
}
}
kfree(rbuf);
else
n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf);
- unlock_kernel();
+ tty_unlock();
return ret;
} /* end of n_hdlc_tty_read() */
count = maxframe;
}
- lock_kernel();
+ tty_lock();
add_wait_queue(&tty->write_wait, &wait);
set_current_state(TASK_INTERRUPTIBLE);
n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
n_hdlc_send_frames(n_hdlc,tty);
}
- unlock_kernel();
+ tty_unlock();
return error;
} /* end of n_hdlc_tty_write() */
TRACE_L("read()");
- lock_kernel();
+ tty_lock();
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
goto unlock;
}
/* block until there is a message: */
- wait_event_interruptible(pInfo->read_wait,
+ wait_event_interruptible_tty(pInfo->read_wait,
(pMsg = remove_msg(pInfo, pClient)));
}
}
ret = -EPERM;
unlock:
- unlock_kernel();
+ tty_unlock();
return ret;
}
pHeader->locks = 0;
pHeader->owner = NULL;
- lock_kernel();
+ tty_lock();
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
add_tx_queue(pInfo, pHeader);
trigger_transmit(pInfo);
- unlock_kernel();
+ tty_unlock();
return 0;
}
if (I_IUCLC(tty) && L_IEXTEN(tty))
c = tolower(c);
+ if (L_EXTPROC(tty)) {
+ put_tty_queue(c, tty);
+ return;
+ }
+
if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) &&
c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) {
n_tty_set_room(tty);
- if (!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) {
+ if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
+ L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
static inline int input_available_p(struct tty_struct *tty, int amt)
{
tty_flush_to_ldisc(tty);
- if (tty->icanon) {
+ if (tty->icanon && !L_EXTPROC(tty)) {
if (tty->canon_data)
return 1;
} else if (tty->read_cnt >= (amt ? amt : 1))
spin_lock_irqsave(&tty->read_lock, flags);
tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
tty->read_cnt -= n;
+ /* Turn single EOF into zero-length read */
+ if (L_EXTPROC(tty) && tty->icanon && n == 1) {
+ if (!tty->read_cnt && (*b)[n-1] == EOF_CHAR(tty))
+ n--;
+ }
spin_unlock_irqrestore(&tty->read_lock, flags);
*b += n;
*nr -= n;
nr--;
}
- if (tty->icanon) {
+ if (tty->icanon && !L_EXTPROC(tty)) {
/* N.B. avoid overrun if nr == 0 */
while (nr && tty->read_cnt) {
int eol;
ret = tty_init_termios(tty);
if (ret == 0) {
tty_driver_kref_get(driver);
+ tty->count++;
+ tty->driver_data = port;
driver->ttys[tty->index] = tty;
}
return ret;
static int ntty_open(struct tty_struct *tty, struct file *filp)
{
- struct port *port = get_port_by_tty(tty);
+ struct port *port = tty->driver_data;
return tty_port_open(&port->port, tty, filp);
}
if (dc) {
mutex_lock(&port->tty_sem);
if (port->port.count)
- room = port->fifo_ul.size -
- kfifo_len(&port->fifo_ul);
+ room = kfifo_avail(&port->fifo_ul);
mutex_unlock(&port->tty_sem);
}
return room;
if (tty->driver == ptm_driver)
devpts_pty_kill(tty->link);
#endif
+ tty_unlock();
tty_vhangup(tty->link);
+ tty_lock();
}
}
return 0;
}
+/* Send a signal to the slave */
+static int pty_signal(struct tty_struct *tty, int sig)
+{
+ unsigned long flags;
+ struct pid *pgrp;
+
+ if (tty->link) {
+ spin_lock_irqsave(&tty->link->ctrl_lock, flags);
+ pgrp = get_pid(tty->link->pgrp);
+ spin_unlock_irqrestore(&tty->link->ctrl_lock, flags);
+
+ kill_pgrp(pgrp, sig, 1);
+ put_pid(pgrp);
+ }
+ return 0;
+}
+
static void pty_flush_buffer(struct tty_struct *tty)
{
struct tty_struct *to = tty->link;
switch (cmd) {
case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */
return pty_set_lock(tty, (int __user *) arg);
+ case TIOCSIG: /* Send signal to other side of pty */
+ return pty_signal(tty, (int) arg);
}
return -ENOIOCTLCMD;
}
return pty_set_lock(tty, (int __user *)arg);
case TIOCGPTN: /* Get PT Number */
return put_user(tty->index, (unsigned int __user *)arg);
+ case TIOCSIG: /* Send signal to other side of pty */
+ return pty_signal(tty, (int) arg);
}
return -ENOIOCTLCMD;
* allocated_ptys_lock handles the list of free pty numbers
*/
-static int __ptmx_open(struct inode *inode, struct file *filp)
+static int ptmx_open(struct inode *inode, struct file *filp)
{
struct tty_struct *tty;
int retval;
nonseekable_open(inode, filp);
/* find a device that is not in use. */
+ tty_lock();
index = devpts_new_index(inode);
+ tty_unlock();
if (index < 0)
return index;
mutex_lock(&tty_mutex);
+ tty_lock();
tty = tty_init_dev(ptm_driver, index, 1);
mutex_unlock(&tty_mutex);
}
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
- filp->private_data = tty;
- file_move(filp, &tty->tty_files);
+
+ tty_add_file(tty, filp);
retval = devpts_pty_new(inode, tty->link);
if (retval)
goto out1;
retval = ptm_driver->ops->open(tty, filp);
- if (!retval)
- return 0;
+ if (retval)
+ goto out2;
out1:
+ tty_unlock();
+ return retval;
+out2:
+ tty_unlock();
tty_release(inode, filp);
return retval;
out:
devpts_kill_index(inode, index);
+ tty_unlock();
return retval;
}
-static int ptmx_open(struct inode *inode, struct file *filp)
-{
- int ret;
-
- lock_kernel();
- ret = __ptmx_open(inode, filp);
- unlock_kernel();
- return ret;
-}
-
static struct file_operations ptmx_fops;
static void __init unix98_pty_init(void)
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/tty_flip.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/device.h>
if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
return -EFAULT;
+ mutex_lock(&port->port.mutex);
change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
if ((tmp.close_delay != port->port.close_delay) ||
(tmp.closing_wait != port->port.closing_wait) ||
((tmp.flags & ~ASYNC_USR_MASK) !=
- (port->port.flags & ~ASYNC_USR_MASK)))
+ (port->port.flags & ~ASYNC_USR_MASK))) {
+ mutex_unlock(&port->port.mutex);
return -EPERM;
+ }
port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
(tmp.flags & ASYNC_USR_MASK));
} else {
rc_change_speed(tty, bp, port);
spin_unlock_irqrestore(&riscom_lock, flags);
}
+ mutex_unlock(&port->port.mutex);
return 0;
}
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_CIRRUS;
tmp.line = port - rc_port;
+
+ mutex_lock(&port->port.mutex);
tmp.port = bp->base;
tmp.irq = bp->irq;
tmp.flags = port->port.flags;
tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
tmp.close_delay = port->port.close_delay * HZ/100;
tmp.closing_wait = port->port.closing_wait * HZ/100;
+ mutex_unlock(&port->port.mutex);
tmp.xmit_fifo_size = CD180_NFIFO;
return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
switch (cmd) {
case TIOCGSERIAL:
- lock_kernel();
retval = rc_get_serial_info(port, argp);
- unlock_kernel();
break;
case TIOCSSERIAL:
- lock_kernel();
retval = rc_set_serial_info(tty, port, argp);
- unlock_kernel();
break;
default:
retval = -ENOIOCTLCMD;
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
-#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
if (tty_port_close_start(port, tty, filp) == 0)
return;
+ mutex_lock(&port->mutex);
cp = &info->channel;
/*
* Before we drop DTR, make sure the UART transmitter
info->xmit_buf = NULL;
}
}
+ spin_lock_irq(&port->lock);
info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE);
tty->closing = 0;
+ spin_unlock_irq(&port->lock);
+ mutex_unlock(&port->mutex);
tty_port_tty_set(port, NULL);
+
wake_up_interruptible(&port->close_wait);
complete_all(&info->close_wait);
atomic_dec(&rp_num_ports_open);
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof (tmp));
+ mutex_lock(&info->port.mutex);
tmp.line = info->line;
tmp.flags = info->flags;
tmp.close_delay = info->port.close_delay;
tmp.closing_wait = info->port.closing_wait;
tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
+ mutex_unlock(&info->port.mutex);
if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
return -EFAULT;
if (copy_from_user(&new_serial, new_info, sizeof (new_serial)))
return -EFAULT;
+ mutex_lock(&info->port.mutex);
if (!capable(CAP_SYS_ADMIN))
{
- if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK))
+ if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) {
+ mutex_unlock(&info->port.mutex);
return -EPERM;
+ }
info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
configure_r_port(tty, info, NULL);
return 0;
tty->alt_speed = 230400;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
tty->alt_speed = 460800;
+ mutex_unlock(&info->port.mutex);
configure_r_port(tty, info, NULL);
return 0;
if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
return -ENXIO;
- lock_kernel();
-
switch (cmd) {
case RCKP_GET_STRUCT:
if (copy_to_user(argp, info, sizeof (struct r_port)))
default:
ret = -ENOIOCTLCMD;
}
- unlock_kernel();
return ret;
}
jiffies);
printk(KERN_INFO "cps=%d...\n", info->cps);
#endif
- lock_kernel();
while (1) {
txcnt = sGetTxCnt(cp);
if (!txcnt) {
break;
}
__set_current_state(TASK_RUNNING);
- unlock_kernel();
#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
#endif
{
CHANNEL_t *cp;
struct r_port *info = tty->driver_data;
+ unsigned long flags;
if (rocket_paranoia_check(info, "rp_hangup"))
return;
printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line);
#endif
rp_flush_buffer(tty);
- if (info->port.flags & ASYNC_CLOSING)
+ spin_lock_irqsave(&info->port.lock, flags);
+ if (info->port.flags & ASYNC_CLOSING) {
+ spin_unlock_irqrestore(&info->port.lock, flags);
return;
+ }
if (info->port.count)
atomic_dec(&rp_num_ports_open);
clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+ spin_unlock_irqrestore(&info->port.lock, flags);
tty_port_hangup(&info->port);
sDisCTSFlowCtl(cp);
sDisTxSoftFlowCtl(cp);
sClrTxXOFF(cp);
- info->port.flags &= ~ASYNC_INITIALIZED;
+ clear_bit(ASYNCB_INITIALIZED, &info->port.flags);
wake_up_interruptible(&info->port.open_wait);
}
#endif
#ifdef CONFIG_SPARC32
struct device_node *ebus_dp;
- struct of_device *op;
+ struct platform_device *op;
#else
void *r;
#ifdef RTC_IRQ
#include <linux/selection.h>
#include <linux/tiocl.h>
#include <linux/console.h>
+#include <linux/smp_lock.h>
/* Don't take this from <ctype.h>: 011-015 on the screen aren't spaces */
#define isspace(c) ((c) == ' ')
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
+ /* always called with BTM from vt_ioctl */
+ WARN_ON(!tty_locked());
+
acquire_console_sem();
poke_blanked_console();
release_console_sem();
- ld = tty_ldisc_ref_wait(tty);
-
+ ld = tty_ldisc_ref(tty);
+ if (!ld) {
+ tty_unlock();
+ ld = tty_ldisc_ref_wait(tty);
+ tty_lock();
+ }
+
add_wait_queue(&vc->paste_wait, &wait);
while (sel_buffer && sel_buffer_lth > pasted) {
set_current_state(TASK_INTERRUPTIBLE);
printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */
#endif
- lock_kernel();
+ tty_lock();
switch (cmd) {
case CYGETMON:
default:
ret_val = -ENOIOCTLCMD;
}
- unlock_kernel();
+ tty_unlock();
#ifdef SERIAL_DEBUG_OTHER
printk("cy_ioctl done\n");
tty->name, info->count);
/**/
#endif
- schedule();
+ tty_unlock();
+ schedule();
+ tty_lock();
}
__set_current_state(TASK_RUNNING);
remove_wait_queue(&info->open_wait, &wait);
retval = -ERESTARTSYS;
break;
}
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
return -EFAULT;
}
- lock_kernel();
-
+ mutex_lock(&port->port.mutex);
change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
change_speed |= (tmp.custom_divisor != port->custom_divisor);
((tmp.flags & ~ASYNC_USR_MASK) !=
(port->port.flags & ~ASYNC_USR_MASK))) {
func_exit();
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
return -EPERM;
}
port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
sx_change_speed(bp, port);
func_exit();
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
return 0;
}
func_enter();
memset(&tmp, 0, sizeof(tmp));
- lock_kernel();
+ mutex_lock(&port->port.mutex);
tmp.type = PORT_CIRRUS;
tmp.line = port - sx_port;
tmp.port = bp->base;
tmp.closing_wait = port->port.closing_wait * HZ/100;
tmp.custom_divisor = port->custom_divisor;
tmp.xmit_fifo_size = CD186x_NFIFO;
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
if (copy_to_user(retinfo, &tmp, sizeof(tmp))) {
func_exit();
return -EFAULT;
timeout = HZ;
tend = jiffies + timeout;
- lock_kernel();
while (stl_datastate(portp)) {
if (signal_pending(current))
break;
if (time_after_eq(jiffies, tend))
break;
}
- unlock_kernel();
}
/*****************************************************************************/
pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp);
memset(&sio, 0, sizeof(struct serial_struct));
+
+ mutex_lock(&portp->port.mutex);
sio.line = portp->portnr;
sio.port = portp->ioaddr;
sio.flags = portp->port.flags;
brdp = stl_brds[portp->brdnr];
if (brdp != NULL)
sio.irq = brdp->irq;
+ mutex_unlock(&portp->port.mutex);
return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0;
}
if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
return -EFAULT;
+ mutex_lock(&portp->port.mutex);
if (!capable(CAP_SYS_ADMIN)) {
if ((sio.baud_base != portp->baud_base) ||
(sio.close_delay != portp->close_delay) ||
((sio.flags & ~ASYNC_USR_MASK) !=
- (portp->port.flags & ~ASYNC_USR_MASK)))
+ (portp->port.flags & ~ASYNC_USR_MASK))) {
+ mutex_unlock(&portp->port.mutex);
return -EPERM;
+ }
}
portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
portp->close_delay = sio.close_delay;
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
+ mutex_unlock(&portp->port.mutex);
stl_setport(portp, tty->termios);
return 0;
}
rc = 0;
- lock_kernel();
-
switch (cmd) {
case TIOCGSERIAL:
rc = stl_getserial(portp, argp);
rc = -ENOIOCTLCMD;
break;
}
- unlock_kernel();
return rc;
}
return -ENODEV;
}
+ mutex_lock(&portp->port.mutex);
portp->stats.state = portp->istate;
portp->stats.flags = portp->port.flags;
portp->stats.hwid = portp->hwid;
(STL_TXBUFSIZE - (tail - head));
portp->stats.signals = (unsigned long) stl_getsignals(portp);
+ mutex_unlock(&portp->port.mutex);
return copy_to_user(cp, &portp->stats,
sizeof(comstats_t)) ? -EFAULT : 0;
return -ENODEV;
}
+ mutex_lock(&portp->port.mutex);
memset(&portp->stats, 0, sizeof(comstats_t));
portp->stats.brd = portp->brdnr;
portp->stats.panel = portp->panelnr;
portp->stats.port = portp->portnr;
+ mutex_unlock(&portp->port.mutex);
return copy_to_user(cp, &portp->stats,
sizeof(comstats_t)) ? -EFAULT : 0;
}
return -ENODEV;
rc = 0;
- lock_kernel();
switch (cmd) {
case COM_GETPORTSTATS:
rc = stl_getportstats(NULL, NULL, argp);
rc = -ENOIOCTLCMD;
break;
}
- unlock_kernel();
return rc;
}
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
- lock_kernel();
+ tty_lock();
sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg);
break;
}
out:
- unlock_kernel();
+ tty_unlock();
func_exit();
return rc;
}
int rv;
func_enter();
- lock_kernel();
+ tty_lock();
if (flag)
rv = sx_send_command(port, HS_START, -1, HS_IDLE_BREAK);
if (rv != 1)
printk(KERN_ERR "sx: couldn't send break (%x).\n",
read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat)));
- unlock_kernel();
+ tty_unlock();
func_exit();
return 0;
}
/* func_enter2(); */
rc = 0;
- lock_kernel();
+ tty_lock();
switch (cmd) {
case TIOCGSERIAL:
rc = gs_getserial(&port->gs, argp);
rc = -ENOIOCTLCMD;
break;
}
- unlock_kernel();
+ tty_unlock();
/* func_exit(); */
return rc;
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
if (!user_icount) {
memset(&info->icount, 0, sizeof(info->icount));
} else {
+ mutex_lock(&info->port.mutex);
COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
+ mutex_unlock(&info->port.mutex);
if (err)
return -EFAULT;
}
printk("%s(%d):mgsl_get_params(%s)\n",
__FILE__,__LINE__, info->device_name);
+ mutex_lock(&info->port.mutex);
COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
+ mutex_unlock(&info->port.mutex);
if (err) {
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",
return -EFAULT;
}
+ mutex_lock(&info->port.mutex);
spin_lock_irqsave(&info->irq_spinlock,flags);
memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
spin_unlock_irqrestore(&info->irq_spinlock,flags);
mgsl_change_params(info);
+ mutex_unlock(&info->port.mutex);
return 0;
unsigned int cmd, unsigned long arg)
{
struct mgsl_struct * info = tty->driver_data;
- int ret;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
return -EIO;
}
- lock_kernel();
- ret = mgsl_ioctl_common(info, cmd, arg);
- unlock_kernel();
- return ret;
+ return mgsl_ioctl_common(info, cmd, arg);
}
static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
if (tty_port_close_start(&info->port, tty, filp) == 0)
goto cleanup;
-
+
+ mutex_lock(&info->port.mutex);
if (info->port.flags & ASYNC_INITIALIZED)
mgsl_wait_until_sent(tty, info->timeout);
mgsl_flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info);
+ mutex_unlock(&info->port.mutex);
tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
* Note: use tight timings here to satisfy the NIST-PCTS.
*/
- lock_kernel();
if ( info->params.data_rate ) {
char_time = info->timeout/(32 * 5);
if (!char_time)
break;
}
}
- unlock_kernel();
exit:
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready blocking on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
#define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
#define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
#define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
-//#define DBGTBUF(info) dump_tbufs(info)
-//#define DBGRBUF(info) dump_rbufs(info)
+/*#define DBGTBUF(info) dump_tbufs(info)*/
+/*#define DBGRBUF(info) dump_rbufs(info)*/
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
goto cleanup;
}
+ mutex_lock(&info->port.mutex);
info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
if (info->netcount) {
retval = -EBUSY;
spin_unlock_irqrestore(&info->netlock, flags);
+ mutex_unlock(&info->port.mutex);
goto cleanup;
}
info->port.count++;
if (retval < 0)
goto cleanup;
}
-
+ mutex_unlock(&info->port.mutex);
retval = block_til_ready(tty, filp, info);
if (retval) {
DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
if (tty_port_close_start(&info->port, tty, filp) == 0)
goto cleanup;
+ mutex_lock(&info->port.mutex);
if (info->port.flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info);
+ mutex_unlock(&info->port.mutex);
tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
static void hangup(struct tty_struct *tty)
{
struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
if (sanity_check(info, tty->name, "hangup"))
return;
DBGINFO(("%s hangup\n", info->device_name));
flush_buffer(tty);
+
+ mutex_lock(&info->port.mutex);
shutdown(info);
+ spin_lock_irqsave(&info->port.lock, flags);
info->port.count = 0;
info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
info->port.tty = NULL;
+ spin_unlock_irqrestore(&info->port.lock, flags);
+ mutex_unlock(&info->port.mutex);
wake_up_interruptible(&info->port.open_wait);
}
* Note: use tight timings here to satisfy the NIST-PCTS.
*/
- lock_kernel();
-
if (info->params.data_rate) {
char_time = info->timeout/(32 * 5);
if (!char_time)
if (timeout && time_after(jiffies, orig_jiffies + timeout))
break;
}
- unlock_kernel();
-
exit:
DBGINFO(("%s wait_until_sent exit\n", info->device_name));
}
return -EIO;
}
- lock_kernel();
-
+ switch (cmd) {
+ case MGSL_IOCWAITEVENT:
+ return wait_mgsl_event(info, argp);
+ case TIOCMIWAIT:
+ return modem_input_wait(info,(int)arg);
+ case TIOCGICOUNT:
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock,flags);
+ p_cuser = argp;
+ if (put_user(cnow.cts, &p_cuser->cts) ||
+ put_user(cnow.dsr, &p_cuser->dsr) ||
+ put_user(cnow.rng, &p_cuser->rng) ||
+ put_user(cnow.dcd, &p_cuser->dcd) ||
+ put_user(cnow.rx, &p_cuser->rx) ||
+ put_user(cnow.tx, &p_cuser->tx) ||
+ put_user(cnow.frame, &p_cuser->frame) ||
+ put_user(cnow.overrun, &p_cuser->overrun) ||
+ put_user(cnow.parity, &p_cuser->parity) ||
+ put_user(cnow.brk, &p_cuser->brk) ||
+ put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
+ return -EFAULT;
+ return 0;
+ case MGSL_IOCSGPIO:
+ return set_gpio(info, argp);
+ case MGSL_IOCGGPIO:
+ return get_gpio(info, argp);
+ case MGSL_IOCWAITGPIO:
+ return wait_gpio(info, argp);
+ }
+ mutex_lock(&info->port.mutex);
switch (cmd) {
case MGSL_IOCGPARAMS:
ret = get_params(info, argp);
case MGSL_IOCGSTATS:
ret = get_stats(info, argp);
break;
- case MGSL_IOCWAITEVENT:
- ret = wait_mgsl_event(info, argp);
- break;
- case TIOCMIWAIT:
- ret = modem_input_wait(info,(int)arg);
- break;
case MGSL_IOCGIF:
ret = get_interface(info, argp);
break;
case MGSL_IOCSIF:
ret = set_interface(info,(int)arg);
break;
- case MGSL_IOCSGPIO:
- ret = set_gpio(info, argp);
- break;
- case MGSL_IOCGGPIO:
- ret = get_gpio(info, argp);
- break;
- case MGSL_IOCWAITGPIO:
- ret = wait_gpio(info, argp);
- break;
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->lock,flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock,flags);
- p_cuser = argp;
- if (put_user(cnow.cts, &p_cuser->cts) ||
- put_user(cnow.dsr, &p_cuser->dsr) ||
- put_user(cnow.rng, &p_cuser->rng) ||
- put_user(cnow.dcd, &p_cuser->dcd) ||
- put_user(cnow.rx, &p_cuser->rx) ||
- put_user(cnow.tx, &p_cuser->tx) ||
- put_user(cnow.frame, &p_cuser->frame) ||
- put_user(cnow.overrun, &p_cuser->overrun) ||
- put_user(cnow.parity, &p_cuser->parity) ||
- put_user(cnow.brk, &p_cuser->brk) ||
- put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
- ret = -EFAULT;
- ret = 0;
- break;
default:
ret = -ENOIOCTLCMD;
}
- unlock_kernel();
+ mutex_unlock(&info->port.mutex);
return ret;
}
}
DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
if (tty_port_close_start(&info->port, tty, filp) == 0)
goto cleanup;
-
+
+ mutex_lock(&info->port.mutex);
if (info->port.flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info);
+ mutex_unlock(&info->port.mutex);
tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
static void hangup(struct tty_struct *tty)
{
SLMP_INFO *info = tty->driver_data;
+ unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s hangup()\n",
if (sanity_check(info, tty->name, "hangup"))
return;
+ mutex_lock(&info->port.mutex);
flush_buffer(tty);
shutdown(info);
+ spin_lock_irqsave(&info->port.lock, flags);
info->port.count = 0;
info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
info->port.tty = NULL;
+ spin_unlock_irqrestore(&info->port.lock, flags);
+ mutex_unlock(&info->port.mutex);
wake_up_interruptible(&info->port.open_wait);
}
if (sanity_check(info, tty->name, "wait_until_sent"))
return;
- lock_kernel();
-
- if (!(info->port.flags & ASYNC_INITIALIZED))
+ if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags))
goto exit;
orig_jiffies = jiffies;
break;
}
} else {
- //TODO: determine if there is something similar to USC16C32
- // TXSTATUS_ALL_SENT status
+ /*
+ * TODO: determine if there is something similar to USC16C32
+ * TXSTATUS_ALL_SENT status
+ */
while ( info->tx_active && info->tx_enabled) {
msleep_interruptible(jiffies_to_msecs(char_time));
if (signal_pending(current))
}
exit:
- unlock_kernel();
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s wait_until_sent() exit\n",
__FILE__,__LINE__, info->device_name );
if (sanity_check(info, tty->name, "write_room"))
return 0;
- lock_kernel();
if (info->params.mode == MGSL_MODE_HDLC) {
ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
} else {
if (ret < 0)
ret = 0;
}
- unlock_kernel();
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s write_room()=%d\n",
*
* Return Value: 0 if success, otherwise error code
*/
-static int do_ioctl(struct tty_struct *tty, struct file *file,
+static int ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
SLMP_INFO *info = tty->driver_data;
return 0;
}
-static int ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int ret;
- lock_kernel();
- ret = do_ioctl(tty, file, cmd, arg);
- unlock_kernel();
- return ret;
-}
-
/*
* /proc fs routines....
*/
if (!user_icount) {
memset(&info->icount, 0, sizeof(info->icount));
} else {
+ mutex_lock(&info->port.mutex);
COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
+ mutex_unlock(&info->port.mutex);
if (err)
return -EFAULT;
}
printk("%s(%d):%s get_params()\n",
__FILE__,__LINE__, info->device_name);
+ mutex_lock(&info->port.mutex);
COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
+ mutex_unlock(&info->port.mutex);
if (err) {
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):%s get_params() user buffer copy failed\n",
return -EFAULT;
}
+ mutex_lock(&info->port.mutex);
spin_lock_irqsave(&info->lock,flags);
memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
spin_unlock_irqrestore(&info->lock,flags);
change_params(info);
+ mutex_unlock(&info->port.mutex);
return 0;
}
printk("%s(%d):%s block_til_ready() count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
DEFINE_MUTEX(tty_mutex);
EXPORT_SYMBOL(tty_mutex);
+/* Spinlock to protect the tty->tty_files list */
+DEFINE_SPINLOCK(tty_files_lock);
+
static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *);
ssize_t redirected_tty_write(struct file *, const char __user *,
#else
#define tty_compat_ioctl NULL
#endif
+static int __tty_fasync(int fd, struct file *filp, int on);
static int tty_fasync(int fd, struct file *filp, int on);
static void release_tty(struct tty_struct *tty, int idx);
static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
kfree(tty);
}
+static inline struct tty_struct *file_tty(struct file *file)
+{
+ return ((struct tty_file_private *)file->private_data)->tty;
+}
+
+/* Associate a new file with the tty structure */
+void tty_add_file(struct tty_struct *tty, struct file *file)
+{
+ struct tty_file_private *priv;
+
+ /* XXX: must implement proper error handling in callers */
+ priv = kmalloc(sizeof(*priv), GFP_KERNEL|__GFP_NOFAIL);
+
+ priv->tty = tty;
+ priv->file = file;
+ file->private_data = priv;
+
+ spin_lock(&tty_files_lock);
+ list_add(&priv->list, &tty->tty_files);
+ spin_unlock(&tty_files_lock);
+}
+
+/* Delete file from its tty */
+void tty_del_file(struct file *file)
+{
+ struct tty_file_private *priv = file->private_data;
+
+ spin_lock(&tty_files_lock);
+ list_del(&priv->list);
+ spin_unlock(&tty_files_lock);
+ file->private_data = NULL;
+ kfree(priv);
+}
+
+
#define TTY_NUMBER(tty) ((tty)->index + (tty)->driver->name_base)
/**
struct list_head *p;
int count = 0;
- file_list_lock();
+ spin_lock(&tty_files_lock);
list_for_each(p, &tty->tty_files) {
count++;
}
- file_list_unlock();
+ spin_unlock(&tty_files_lock);
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_SLAVE &&
tty->link && tty->link->count)
EXPORT_SYMBOL_GPL(tty_wakeup);
/**
- * do_tty_hangup - actual handler for hangup events
+ * __tty_hangup - actual handler for hangup events
* @work: tty device
*
* This can be called by the "eventd" kernel thread. That is process
* remains intact.
*
* Locking:
- * BKL
+ * BTM
* redirect lock for undoing redirection
* file list lock for manipulating list of ttys
* tty_ldisc_lock from called functions
* tasklist_lock to walk task list for hangup event
* ->siglock to protect ->signal/->sighand
*/
-static void do_tty_hangup(struct work_struct *work)
+void __tty_hangup(struct tty_struct *tty)
{
- struct tty_struct *tty =
- container_of(work, struct tty_struct, hangup_work);
struct file *cons_filp = NULL;
struct file *filp, *f = NULL;
struct task_struct *p;
+ struct tty_file_private *priv;
int closecount = 0, n;
unsigned long flags;
int refs = 0;
spin_lock(&redirect_lock);
- if (redirect && redirect->private_data == tty) {
+ if (redirect && file_tty(redirect) == tty) {
f = redirect;
redirect = NULL;
}
spin_unlock(&redirect_lock);
- /* inuse_filps is protected by the single kernel lock */
- lock_kernel();
- check_tty_count(tty, "do_tty_hangup");
+ tty_lock();
+
+ /* inuse_filps is protected by the single tty lock,
+ this really needs to change if we want to flush the
+ workqueue with the lock held */
+ check_tty_count(tty, "tty_hangup");
- file_list_lock();
+ spin_lock(&tty_files_lock);
/* This breaks for file handles being sent over AF_UNIX sockets ? */
- list_for_each_entry(filp, &tty->tty_files, f_u.fu_list) {
+ list_for_each_entry(priv, &tty->tty_files, list) {
+ filp = priv->file;
if (filp->f_op->write == redirected_tty_write)
cons_filp = filp;
if (filp->f_op->write != tty_write)
continue;
closecount++;
- tty_fasync(-1, filp, 0); /* can't block */
+ __tty_fasync(-1, filp, 0); /* can't block */
filp->f_op = &hung_up_tty_fops;
}
- file_list_unlock();
+ spin_unlock(&tty_files_lock);
tty_ldisc_hangup(tty);
*/
set_bit(TTY_HUPPED, &tty->flags);
tty_ldisc_enable(tty);
- unlock_kernel();
+
+ tty_unlock();
+
if (f)
fput(f);
}
+static void do_tty_hangup(struct work_struct *work)
+{
+ struct tty_struct *tty =
+ container_of(work, struct tty_struct, hangup_work);
+
+ __tty_hangup(tty);
+}
+
/**
* tty_hangup - trigger a hangup event
* @tty: tty to hangup
printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf));
#endif
- do_tty_hangup(&tty->hangup_work);
+ __tty_hangup(tty);
}
EXPORT_SYMBOL(tty_vhangup);
+
/**
* tty_vhangup_self - process vhangup for own ctty
*
* exiting; it is 0 if called by the ioctl TIOCNOTTY.
*
* Locking:
- * BKL is taken for hysterical raisins
+ * BTM is taken for hysterical raisins, and held when
+ * called from no_tty().
* tty_mutex is taken to protect tty
* ->siglock is taken to protect ->signal/->sighand
* tasklist_lock is taken to walk process list for sessions
tty = get_current_tty();
if (tty) {
tty_pgrp = get_pid(tty->pgrp);
- lock_kernel();
- if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
- tty_vhangup(tty);
- unlock_kernel();
+ if (on_exit) {
+ if (tty->driver->type != TTY_DRIVER_TYPE_PTY)
+ tty_vhangup(tty);
+ }
tty_kref_put(tty);
} else if (on_exit) {
struct pid *old_pgrp;
void no_tty(void)
{
struct task_struct *tsk = current;
- lock_kernel();
+ tty_lock();
disassociate_ctty(0);
- unlock_kernel();
+ tty_unlock();
proc_clear_tty(tsk);
}
loff_t *ppos)
{
int i;
- struct tty_struct *tty;
- struct inode *inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
+ struct tty_struct *tty = file_tty(file);
struct tty_ldisc *ld;
- tty = (struct tty_struct *)file->private_data;
- inode = file->f_path.dentry->d_inode;
if (tty_paranoia_check(tty, inode, "tty_read"))
return -EIO;
if (!tty || (test_bit(TTY_IO_ERROR, &tty->flags)))
* We don't put it into the syslog queue right now maybe in the future if
* really needed.
*
- * We must still hold the BKL and test the CLOSING flag for the moment.
+ * We must still hold the BTM and test the CLOSING flag for the moment.
*/
void tty_write_message(struct tty_struct *tty, char *msg)
{
if (tty) {
mutex_lock(&tty->atomic_write_lock);
- lock_kernel();
+ tty_lock();
if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) {
- unlock_kernel();
+ tty_unlock();
tty->ops->write(tty, msg, strlen(msg));
} else
- unlock_kernel();
+ tty_unlock();
tty_write_unlock(tty);
}
return;
static ssize_t tty_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- struct tty_struct *tty;
struct inode *inode = file->f_path.dentry->d_inode;
+ struct tty_struct *tty = file_tty(file);
+ struct tty_ldisc *ld;
ssize_t ret;
- struct tty_ldisc *ld;
- tty = (struct tty_struct *)file->private_data;
if (tty_paranoia_check(tty, inode, "tty_write"))
return -EIO;
if (!tty || !tty->ops->write ||
int ret;
if (driver->ops->install) {
- lock_kernel();
ret = driver->ops->install(driver, tty);
- unlock_kernel();
return ret;
}
if (tty_init_termios(tty) == 0) {
- lock_kernel();
tty_driver_kref_get(driver);
tty->count++;
driver->ttys[idx] = tty;
- unlock_kernel();
return 0;
}
return -ENOMEM;
struct tty_struct *tty;
int retval;
- lock_kernel();
/* Check if pty master is being opened multiple times */
if (driver->subtype == PTY_TYPE_MASTER &&
(driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) {
- unlock_kernel();
return ERR_PTR(-EIO);
}
- unlock_kernel();
/*
* First time open is complex, especially for PTY devices.
if (printk_ratelimit())
printk(KERN_INFO "tty_init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
- lock_kernel();
release_tty(tty, idx);
- unlock_kernel();
return ERR_PTR(retval);
}
tty_driver_kref_put(driver);
module_put(driver->owner);
- file_list_lock();
+ spin_lock(&tty_files_lock);
list_del_init(&tty->tty_files);
- file_list_unlock();
+ spin_unlock(&tty_files_lock);
put_pid(tty->pgrp);
put_pid(tty->session);
int tty_release(struct inode *inode, struct file *filp)
{
- struct tty_struct *tty, *o_tty;
+ struct tty_struct *tty = file_tty(filp);
+ struct tty_struct *o_tty;
int pty_master, tty_closing, o_tty_closing, do_sleep;
int devpts;
int idx;
char buf[64];
- tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, inode, "tty_release_dev"))
return 0;
- lock_kernel();
+ tty_lock();
check_tty_count(tty, "tty_release_dev");
- tty_fasync(-1, filp, 0);
+ __tty_fasync(-1, filp, 0);
idx = tty->index;
pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
if (idx < 0 || idx >= tty->driver->num) {
printk(KERN_DEBUG "tty_release_dev: bad idx when trying to "
"free (%s)\n", tty->name);
- unlock_kernel();
+ tty_unlock();
return 0;
}
if (!devpts) {
if (tty != tty->driver->ttys[idx]) {
- unlock_kernel();
+ tty_unlock();
printk(KERN_DEBUG "tty_release_dev: driver.table[%d] not tty "
"for (%s)\n", idx, tty->name);
return 0;
}
if (tty->termios != tty->driver->termios[idx]) {
- unlock_kernel();
+ tty_unlock();
printk(KERN_DEBUG "tty_release_dev: driver.termios[%d] not termios "
"for (%s)\n",
idx, tty->name);
if (tty->driver->other &&
!(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
if (o_tty != tty->driver->other->ttys[idx]) {
- unlock_kernel();
+ tty_unlock();
printk(KERN_DEBUG "tty_release_dev: other->table[%d] "
"not o_tty for (%s)\n",
idx, tty->name);
return 0 ;
}
if (o_tty->termios != tty->driver->other->termios[idx]) {
- unlock_kernel();
+ tty_unlock();
printk(KERN_DEBUG "tty_release_dev: other->termios[%d] "
"not o_termios for (%s)\n",
idx, tty->name);
return 0;
}
if (o_tty->link != tty) {
- unlock_kernel();
+ tty_unlock();
printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n");
return 0;
}
if (tty->ops->close)
tty->ops->close(tty, filp);
- unlock_kernel();
+ tty_unlock();
/*
* Sanity check: if tty->count is going to zero, there shouldn't be
* any waiters on tty->read_wait or tty->write_wait. We test the
opens on /dev/tty */
mutex_lock(&tty_mutex);
- lock_kernel();
+ tty_lock();
tty_closing = tty->count <= 1;
o_tty_closing = o_tty &&
(o_tty->count <= (pty_master ? 1 : 0));
printk(KERN_WARNING "tty_release_dev: %s: read/write wait queue "
"active!\n", tty_name(tty, buf));
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
schedule();
}
* - do_tty_hangup no longer sees this file descriptor as
* something that needs to be handled for hangups.
*/
- file_kill(filp);
- filp->private_data = NULL;
+ tty_del_file(filp);
/*
* Perform some housekeeping before deciding whether to return.
/* check whether both sides are closing ... */
if (!tty_closing || (o_tty && !o_tty_closing)) {
- unlock_kernel();
+ tty_unlock();
return 0;
}
/* Make this pty number available for reallocation */
if (devpts)
devpts_kill_index(inode, idx);
- unlock_kernel();
+ tty_unlock();
return 0;
}
retval = 0;
mutex_lock(&tty_mutex);
- lock_kernel();
+ tty_lock();
if (device == MKDEV(TTYAUX_MAJOR, 0)) {
tty = get_current_tty();
if (!tty) {
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
return -ENXIO;
}
goto got_driver;
}
}
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
return -ENODEV;
}
driver = get_tty_driver(device, &index);
if (!driver) {
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
return -ENODEV;
}
tty = tty_driver_lookup_tty(driver, inode, index);
if (IS_ERR(tty)) {
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
return PTR_ERR(tty);
}
mutex_unlock(&tty_mutex);
tty_driver_kref_put(driver);
if (IS_ERR(tty)) {
- unlock_kernel();
+ tty_unlock();
return PTR_ERR(tty);
}
- filp->private_data = tty;
- file_move(filp, &tty->tty_files);
+ tty_add_file(tty, filp);
+
check_tty_count(tty, "tty_open");
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
printk(KERN_DEBUG "error %d in opening %s...", retval,
tty->name);
#endif
+ tty_unlock(); /* need to call tty_release without BTM */
tty_release(inode, filp);
- if (retval != -ERESTARTSYS) {
- unlock_kernel();
+ if (retval != -ERESTARTSYS)
return retval;
- }
- if (signal_pending(current)) {
- unlock_kernel();
+
+ if (signal_pending(current))
return retval;
- }
+
schedule();
/*
* Need to reset f_op in case a hangup happened.
*/
+ tty_lock();
if (filp->f_op == &hung_up_tty_fops)
filp->f_op = &tty_fops;
- unlock_kernel();
+ tty_unlock();
goto retry_open;
}
- unlock_kernel();
+ tty_unlock();
mutex_lock(&tty_mutex);
- lock_kernel();
+ tty_lock();
spin_lock_irq(¤t->sighand->siglock);
if (!noctty &&
current->signal->leader &&
tty->session == NULL)
__proc_set_tty(current, tty);
spin_unlock_irq(¤t->sighand->siglock);
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
return 0;
}
static unsigned int tty_poll(struct file *filp, poll_table *wait)
{
- struct tty_struct *tty;
+ struct tty_struct *tty = file_tty(filp);
struct tty_ldisc *ld;
int ret = 0;
- tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_poll"))
return 0;
return ret;
}
-static int tty_fasync(int fd, struct file *filp, int on)
+static int __tty_fasync(int fd, struct file *filp, int on)
{
- struct tty_struct *tty;
+ struct tty_struct *tty = file_tty(filp);
unsigned long flags;
int retval = 0;
- lock_kernel();
- tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_fasync"))
goto out;
}
retval = 0;
out:
- unlock_kernel();
+ return retval;
+}
+
+static int tty_fasync(int fd, struct file *filp, int on)
+{
+ int retval;
+ tty_lock();
+ retval = __tty_fasync(fd, filp, on);
+ tty_unlock();
return retval;
}
*/
long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- struct tty_struct *tty, *real_tty;
+ struct tty_struct *tty = file_tty(file);
+ struct tty_struct *real_tty;
void __user *p = (void __user *)arg;
int retval;
struct tty_ldisc *ld;
struct inode *inode = file->f_dentry->d_inode;
- tty = (struct tty_struct *)file->private_data;
if (tty_paranoia_check(tty, inode, "tty_ioctl"))
return -EINVAL;
unsigned long arg)
{
struct inode *inode = file->f_dentry->d_inode;
- struct tty_struct *tty = file->private_data;
+ struct tty_struct *tty = file_tty(file);
struct tty_ldisc *ld;
int retval = -ENOIOCTLCMD;
if (!filp)
continue;
if (filp->f_op->read == tty_read &&
- filp->private_data == tty) {
+ file_tty(filp) == tty) {
printk(KERN_NOTICE "SAK: killed process %d"
" (%s): fd#%d opened to the tty\n",
task_pid_nr(p), p->comm, i);
/* See if packet mode change of state. */
if (tty->link && tty->link->packet) {
+ int extproc = (old_termios.c_lflag & EXTPROC) |
+ (tty->termios->c_lflag & EXTPROC);
int old_flow = ((old_termios.c_iflag & IXON) &&
(old_termios.c_cc[VSTOP] == '\023') &&
(old_termios.c_cc[VSTART] == '\021'));
int new_flow = (I_IXON(tty) &&
STOP_CHAR(tty) == '\023' &&
START_CHAR(tty) == '\021');
- if (old_flow != new_flow) {
+ if ((old_flow != new_flow) || extproc) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
- tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP);
- if (new_flow)
- tty->ctrl_status |= TIOCPKT_DOSTOP;
- else
- tty->ctrl_status |= TIOCPKT_NOSTOP;
+ if (old_flow != new_flow) {
+ tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP);
+ if (new_flow)
+ tty->ctrl_status |= TIOCPKT_DOSTOP;
+ else
+ tty->ctrl_status |= TIOCPKT_NOSTOP;
+ }
+ if (extproc)
+ tty->ctrl_status |= TIOCPKT_IOCTL;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
wake_up_interruptible(&tty->link->read_wait);
}
*
* A helper opening method. Also a convenient debugging and check
* point.
+ *
+ * Locking: always called with BTM already held.
*/
static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
if (ld->ops->open) {
int ret;
- /* BKL here locks verus a hangup event */
- lock_kernel();
+ /* BTM here locks versus a hangup event */
+ WARN_ON(!tty_locked());
ret = ld->ops->open(tty);
- unlock_kernel();
return ret;
}
return 0;
if (IS_ERR(new_ldisc))
return PTR_ERR(new_ldisc);
- lock_kernel();
+ tty_lock();
/*
* We need to look at the tty locking here for pty/tty pairs
* when both sides try to change in parallel.
*/
if (tty->ldisc->ops->num == ldisc) {
- unlock_kernel();
+ tty_unlock();
tty_ldisc_put(new_ldisc);
return 0;
}
- unlock_kernel();
+ tty_unlock();
/*
* Problem: What do we do if this blocks ?
* We could deadlock here
tty_wait_until_sent(tty, 0);
+ tty_lock();
mutex_lock(&tty->ldisc_mutex);
/*
while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
mutex_unlock(&tty->ldisc_mutex);
+ tty_unlock();
wait_event(tty_ldisc_wait,
test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
+ tty_lock();
mutex_lock(&tty->ldisc_mutex);
}
- lock_kernel();
-
set_bit(TTY_LDISC_CHANGING, &tty->flags);
/*
o_ldisc = tty->ldisc;
- unlock_kernel();
+ tty_unlock();
/*
* Make sure we don't change while someone holds a
* reference to the line discipline. The TTY_LDISC bit
flush_scheduled_work();
+ tty_lock();
mutex_lock(&tty->ldisc_mutex);
- lock_kernel();
if (test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
clear_bit(TTY_LDISC_CHANGING, &tty->flags);
mutex_unlock(&tty->ldisc_mutex);
tty_ldisc_put(new_ldisc);
- unlock_kernel();
+ tty_unlock();
return -EIO;
}
if (o_work)
schedule_delayed_work(&o_tty->buf.work, 1);
mutex_unlock(&tty->ldisc_mutex);
- unlock_kernel();
+ tty_unlock();
return retval;
}
* Avoid racing set_ldisc or tty_ldisc_release
*/
mutex_lock(&tty->ldisc_mutex);
- tty_ldisc_halt(tty);
+
+ /*
+ * this is like tty_ldisc_halt, but we need to give up
+ * the BTM before calling cancel_delayed_work_sync,
+ * which may need to wait for another function taking the BTM
+ */
+ clear_bit(TTY_LDISC, &tty->flags);
+ tty_unlock();
+ cancel_delayed_work_sync(&tty->buf.work);
+ mutex_unlock(&tty->ldisc_mutex);
+
+ tty_lock();
+ mutex_lock(&tty->ldisc_mutex);
+
/* At this point we have a closed ldisc and we want to
reopen it. We could defer this to the next open but
it means auditing a lot of other paths so this is
* race with the set_ldisc code path.
*/
+ tty_unlock();
tty_ldisc_halt(tty);
flush_scheduled_work();
+ tty_lock();
mutex_lock(&tty->ldisc_mutex);
/*
--- /dev/null
+/*
+ * drivers/char/tty_lock.c
+ */
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/semaphore.h>
+#include <linux/sched.h>
+
+/*
+ * The 'big tty mutex'
+ *
+ * This mutex is taken and released by tty_lock() and tty_unlock(),
+ * replacing the older big kernel lock.
+ * It can no longer be taken recursively, and does not get
+ * released implicitly while sleeping.
+ *
+ * Don't use in new code.
+ */
+static DEFINE_MUTEX(big_tty_mutex);
+struct task_struct *__big_tty_mutex_owner;
+EXPORT_SYMBOL_GPL(__big_tty_mutex_owner);
+
+/*
+ * Getting the big tty mutex.
+ */
+void __lockfunc tty_lock(void)
+{
+ struct task_struct *task = current;
+
+ WARN_ON(__big_tty_mutex_owner == task);
+
+ mutex_lock(&big_tty_mutex);
+ __big_tty_mutex_owner = task;
+}
+EXPORT_SYMBOL(tty_lock);
+
+void __lockfunc tty_unlock(void)
+{
+ struct task_struct *task = current;
+
+ WARN_ON(__big_tty_mutex_owner != task);
+ __big_tty_mutex_owner = NULL;
+
+ mutex_unlock(&big_tty_mutex);
+}
+EXPORT_SYMBOL(tty_unlock);
/* block if port is in the process of being closed */
if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- wait_event_interruptible(port->close_wait,
+ wait_event_interruptible_tty(port->close_wait,
!(port->flags & ASYNC_CLOSING));
if (port->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
retval = -ERESTARTSYS;
break;
}
+ tty_unlock();
schedule();
+ tty_lock();
}
finish_wait(&port->open_wait, &wait);
unsigned int currcons = iminor(inode) & 127;
int ret = 0;
- lock_kernel();
+ tty_lock();
if(currcons && !vc_cons_allocated(currcons-1))
ret = -ENXIO;
- unlock_kernel();
+ tty_unlock();
return ret;
}
#include <asm/system.h>
#include <linux/uaccess.h>
#include <linux/kdb.h>
+#include <linux/ctype.h>
#define MAX_NR_CON_DRIVER 16
int fg_console;
int last_console;
int want_console = -1;
-int saved_fg_console;
-int saved_last_console;
-int saved_want_console;
-int saved_vc_mode;
+static int saved_fg_console;
+static int saved_last_console;
+static int saved_want_console;
+static int saved_vc_mode;
+static int saved_console_blanked;
/*
* For each existing display, we have a pointer to console currently visible
return p;
}
+/* Called from the keyboard irq path.. */
static inline void scrolldelta(int lines)
{
+ /* FIXME */
+ /* scrolldelta needs some kind of consistency lock, but the BKL was
+ and still is not protecting versus the scheduled back end */
scrollback_delta += lines;
schedule_console_callback();
}
update_attr(vc);
clear_buffer_attributes(vc);
}
- if (update && vc->vc_mode != KD_GRAPHICS)
+
+ /* Forcibly update if we're panicing */
+ if ((update && vc->vc_mode != KD_GRAPHICS) ||
+ vt_force_oops_output(vc))
do_update_region(vc, vc->vc_origin, vc->vc_screenbuf_size / 2);
}
set_cursor(vc);
vc->vc_hi_font_mask = 0;
vc->vc_complement_mask = 0;
vc->vc_can_do_color = 0;
+ vc->vc_panic_force_write = false;
vc->vc_sw->con_init(vc, init);
if (!vc->vc_complement_mask)
vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800;
if (!vc)
return -ENOMEM;
vc_cons[currcons].d = vc;
+ tty_port_init(&vc->port);
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
visual_init(vc, currcons, 1);
if (!*vc->vc_uni_pagedir_loc)
* Resize a virtual console as seen from the console end of things. We
* use the common vc_do_resize methods to update the structures. The
* caller must hold the console sem to protect console internals and
- * vc->vc_tty
+ * vc->port.tty
*/
int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows)
{
- return vc_do_resize(vc->vc_tty, vc, cols, rows);
+ return vc_do_resize(vc->port.tty, vc, cols, rows);
}
/**
vc->vc_state = ESnormal;
return;
case ESpalette:
- if ( (c>='0'&&c<='9') || (c>='A'&&c<='F') || (c>='a'&&c<='f') ) {
- vc->vc_par[vc->vc_npar++] = (c > '9' ? (c & 0xDF) - 'A' + 10 : c - '0');
+ if (isxdigit(c)) {
+ vc->vc_par[vc->vc_npar++] = hex_to_bin(c);
if (vc->vc_npar == 7) {
int i = vc->vc_par[0] * 3, j = 1;
vc->vc_palette[i] = 16 * vc->vc_par[j++];
goto quit;
}
- if (vc->vc_mode != KD_TEXT)
+ if (vc->vc_mode != KD_TEXT && !vt_force_oops_output(vc))
goto quit;
/* undraw cursor first */
return -EFAULT;
ret = 0;
- lock_kernel();
-
switch (type)
{
case TIOCL_SETSEL:
ret = -EINVAL;
break;
}
- unlock_kernel();
return ret;
}
struct vc_data *vc = vc_cons[currcons].d;
/* Still being freed */
- if (vc->vc_tty) {
+ if (vc->port.tty) {
release_console_sem();
return -ERESTARTSYS;
}
tty->driver_data = vc;
- vc->vc_tty = tty;
+ vc->port.tty = tty;
if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
struct vc_data *vc = tty->driver_data;
BUG_ON(vc == NULL);
acquire_console_sem();
- vc->vc_tty = NULL;
+ vc->port.tty = NULL;
release_console_sem();
tty_shutdown(tty);
}
for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) {
vc_cons[currcons].d = vc = kzalloc(sizeof(struct vc_data), GFP_NOWAIT);
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
+ tty_port_init(&vc->port);
visual_init(vc, currcons, 1);
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
vc_init(vc, vc->vc_rows, vc->vc_cols,
saved_last_console = last_console;
saved_want_console = want_console;
saved_vc_mode = vc->vc_mode;
+ saved_console_blanked = console_blanked;
vc->vc_mode = KD_TEXT;
console_blanked = 0;
if (vc->vc_sw->con_debug_enter)
fg_console = saved_fg_console;
last_console = saved_last_console;
want_console = saved_want_console;
+ console_blanked = saved_console_blanked;
vc_cons[fg_console].d->vc_mode = saved_vc_mode;
vc = vc_cons[fg_console].d;
return;
}
vc = vc_cons[fg_console].d;
- if (vc->vc_mode != KD_TEXT)
+ /* Try to unblank in oops case too */
+ if (vc->vc_mode != KD_TEXT && !vt_force_oops_output(vc))
return; /* but leave console_blanked != 0 */
if (blankinterval) {
}
console_blanked = 0;
- if (vc->vc_sw->con_blank(vc, 0, leaving_gfx))
+ if (vc->vc_sw->con_blank(vc, 0, leaving_gfx) || vt_force_oops_output(vc))
/* Low-level driver cannot restore -> do it ourselves */
update_screen(vc);
if (console_blank_hook)
list_add(&vw->list, &vt_events);
spin_unlock_irqrestore(&vt_event_lock, flags);
/* Wait for it to pass */
- wait_event_interruptible(vt_event_waitqueue, vw->done);
+ wait_event_interruptible_tty(vt_event_waitqueue, vw->done);
/* Dequeue it */
spin_lock_irqsave(&vt_event_lock, flags);
list_del(&vw->list);
console = vc->vc_num;
- lock_kernel();
+ tty_lock();
if (!vc_cons_allocated(console)) { /* impossible? */
ret = -ENOIOCTLCMD;
ret = -ENOIOCTLCMD;
}
out:
- unlock_kernel();
+ tty_unlock();
return ret;
eperm:
ret = -EPERM;
acquire_console_sem();
vc = vc_con->d;
if (vc) {
- tty = vc->vc_tty;
+ tty = vc->port.tty;
/*
* SAK should also work in all raw modes and reset
* them properly.
console = vc->vc_num;
- lock_kernel();
+ tty_lock();
if (!vc_cons_allocated(console)) { /* impossible? */
ret = -ENOIOCTLCMD;
goto fallback;
}
out:
- unlock_kernel();
+ tty_unlock();
return ret;
fallback:
- unlock_kernel();
+ tty_unlock();
return vt_ioctl(tty, file, cmd, arg);
}
return -EIO;
}
release_console_sem();
+ tty_lock();
if (vt_waitactive(vt + 1)) {
pr_debug("Suspend: Can't switch VCs.");
+ tty_unlock();
return -EINTR;
}
+ tty_unlock();
return prev;
}
#ifdef CONFIG_OF
/* For open firmware. */
+#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#endif
#if defined(CONFIG_OF)
static int __devinit
-hwicap_of_probe(struct of_device *op, const struct of_device_id *match)
+hwicap_of_probe(struct platform_device *op, const struct of_device_id *match)
{
struct resource res;
const unsigned int *id;
regs);
}
-static int __devexit hwicap_of_remove(struct of_device *op)
+static int __devexit hwicap_of_remove(struct platform_device *op)
{
return hwicap_remove(&op->dev);
}
config ZCRYPT_MONOLITHIC
bool "Monolithic zcrypt module"
- depends on ZCRYPT="m"
+ depends on ZCRYPT
help
Select this option if you want to have a single module z90crypt,
that contains all parts of the crypto device driver (ap bus,
/**
* Module Initialization Routine
*/
-static int __init crypto4xx_probe(struct of_device *ofdev,
+static int __init crypto4xx_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
int rc;
return rc;
}
-static int __exit crypto4xx_remove(struct of_device *ofdev)
+static int __exit crypto4xx_remove(struct platform_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct crypto4xx_core_device *core_dev = dev_get_drvdata(dev);
struct crypto4xx_core_device {
struct device *device;
- struct of_device *ofdev;
+ struct platform_device *ofdev;
struct crypto4xx_device *dev;
u32 int_status;
u32 irq;
struct buffer_desc {
u32 phys_next;
+#ifdef __ARMEB__
u16 buf_len;
u16 pkt_len;
+#else
+ u16 pkt_len;
+ u16 buf_len;
+#endif
u32 phys_addr;
u32 __reserved[4];
struct buffer_desc *next;
};
struct crypt_ctl {
+#ifdef __ARMEB__
u8 mode; /* NPE_OP_* operation mode */
u8 init_len;
u16 reserved;
+#else
+ u16 reserved;
+ u8 init_len;
+ u8 mode; /* NPE_OP_* operation mode */
+#endif
u8 iv[MAX_IVLEN]; /* IV for CBC mode or CTR IV for CTR mode */
u32 icv_rev_aes; /* icv or rev aes */
u32 src_buf;
u32 dst_buf;
+#ifdef __ARMEB__
u16 auth_offs; /* Authentication start offset */
u16 auth_len; /* Authentication data length */
u16 crypt_offs; /* Cryption start offset */
u16 crypt_len; /* Cryption data length */
+#else
+ u16 auth_len; /* Authentication data length */
+ u16 auth_offs; /* Authentication start offset */
+ u16 crypt_len; /* Cryption data length */
+ u16 crypt_offs; /* Cryption start offset */
+#endif
u32 aadAddr; /* Additional Auth Data Addr for CCM mode */
u32 crypto_ctx; /* NPE Crypto Param structure address */
/* write cfg word to cryptinfo */
cfgword = algo->cfgword | ( authsize << 6); /* (authsize/4) << 8 */
+#ifndef __ARMEB__
+ cfgword ^= 0xAA000000; /* change the "byte swap" flags */
+#endif
*(u32*)cinfo = cpu_to_be32(cfgword);
cinfo += sizeof(cfgword);
/* To map CWQ queues to interrupt sources, the hypervisor API provides
* a devino. This isn't very useful to us because all of the
- * interrupts listed in the of_device node have been translated to
+ * interrupts listed in the device_node have been translated to
* Linux virtual IRQ cookie numbers.
*
* So we have to back-translate, going through the 'intr' and 'ino'
* 'interrupts' property entries, in order to to figure out which
* devino goes to which already-translated IRQ.
*/
-static int find_devino_index(struct of_device *dev, struct spu_mdesc_info *ip,
+static int find_devino_index(struct platform_device *dev, struct spu_mdesc_info *ip,
unsigned long dev_ino)
{
const unsigned int *dev_intrs;
if (!dev_intrs)
return -ENODEV;
- for (i = 0; i < dev->num_irqs; i++) {
+ for (i = 0; i < dev->archdata.num_irqs; i++) {
if (dev_intrs[i] == intr)
return i;
}
return -ENODEV;
}
-static int spu_map_ino(struct of_device *dev, struct spu_mdesc_info *ip,
+static int spu_map_ino(struct platform_device *dev, struct spu_mdesc_info *ip,
const char *irq_name, struct spu_queue *p,
irq_handler_t handler)
{
if (index < 0)
return index;
- p->irq = dev->irqs[index];
+ p->irq = dev->archdata.irqs[index];
sprintf(p->irq_name, "%s-%d", irq_name, index);
* gathering cpu membership information.
*/
static int spu_mdesc_walk_arcs(struct mdesc_handle *mdesc,
- struct of_device *dev,
+ struct platform_device *dev,
u64 node, struct spu_queue *p,
struct spu_queue **table)
{
/* Process an 'exec-unit' MDESC node of type 'cwq'. */
static int handle_exec_unit(struct spu_mdesc_info *ip, struct list_head *list,
- struct of_device *dev, struct mdesc_handle *mdesc,
+ struct platform_device *dev, struct mdesc_handle *mdesc,
u64 node, const char *iname, unsigned long q_type,
irq_handler_t handler, struct spu_queue **table)
{
return spu_map_ino(dev, ip, iname, p, handler);
}
-static int spu_mdesc_scan(struct mdesc_handle *mdesc, struct of_device *dev,
+static int spu_mdesc_scan(struct mdesc_handle *mdesc, struct platform_device *dev,
struct spu_mdesc_info *ip, struct list_head *list,
const char *exec_name, unsigned long q_type,
irq_handler_t handler, struct spu_queue **table)
}
static int __devinit grab_mdesc_irq_props(struct mdesc_handle *mdesc,
- struct of_device *dev,
+ struct platform_device *dev,
struct spu_mdesc_info *ip,
const char *node_name)
{
pr_info("%s", version);
}
-static int __devinit n2_crypto_probe(struct of_device *dev,
+static int __devinit n2_crypto_probe(struct platform_device *dev,
const struct of_device_id *match)
{
struct mdesc_handle *mdesc;
return err;
}
-static int __devexit n2_crypto_remove(struct of_device *dev)
+static int __devexit n2_crypto_remove(struct platform_device *dev)
{
struct n2_crypto *np = dev_get_drvdata(&dev->dev);
kfree(mp);
}
-static int __devinit n2_mau_probe(struct of_device *dev,
+static int __devinit n2_mau_probe(struct platform_device *dev,
const struct of_device_id *match)
{
struct mdesc_handle *mdesc;
return err;
}
-static int __devexit n2_mau_remove(struct of_device *dev)
+static int __devexit n2_mau_remove(struct platform_device *dev)
{
struct n2_mau *mp = dev_get_drvdata(&dev->dev);
struct talitos_private {
struct device *dev;
- struct of_device *ofdev;
+ struct platform_device *ofdev;
void __iomem *reg;
int irq;
return ret;
}
-static int talitos_remove(struct of_device *ofdev)
+static int talitos_remove(struct platform_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct talitos_private *priv = dev_get_drvdata(dev);
return t_alg;
}
-static int talitos_probe(struct of_device *ofdev,
+static int talitos_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device *dev = &ofdev->dev;
config SH_DMAE
tristate "Renesas SuperH DMAC support"
- depends on SUPERH && SH_DMA
+ depends on (SUPERH && SH_DMA) || (ARM && ARCH_SHMOBILE)
depends on !SH_DMA_API
select DMA_ENGINE
help
kfree(chan);
}
-static int __devinit fsldma_of_probe(struct of_device *op,
+static int __devinit fsldma_of_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct fsldma_device *fdev;
return err;
}
-static int fsldma_of_remove(struct of_device *op)
+static int fsldma_of_remove(struct platform_device *op)
{
struct fsldma_device *fdev;
unsigned int i;
return &mdesc->desc;
}
-static int __devinit mpc_dma_probe(struct of_device *op,
+static int __devinit mpc_dma_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *dn = op->dev.of_node;
return retval;
}
-static int __devexit mpc_dma_remove(struct of_device *op)
+static int __devexit mpc_dma_remove(struct platform_device *op)
{
struct device *dev = &op->dev;
struct mpc_dma *mdma = dev_get_drvdata(dev);
struct ppc440spe_adma_chan *chan,
int *initcode)
{
- struct of_device *ofdev;
+ struct platform_device *ofdev;
struct device_node *np;
int ret;
- ofdev = container_of(adev->dev, struct of_device, dev);
+ ofdev = container_of(adev->dev, struct platform_device, dev);
np = ofdev->dev.of_node;
if (adev->id != PPC440SPE_XOR_ID) {
adev->err_irq = irq_of_parse_and_map(np, 1);
/**
* ppc440spe_adma_probe - probe the asynch device
*/
-static int __devinit ppc440spe_adma_probe(struct of_device *ofdev,
+static int __devinit ppc440spe_adma_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
/**
* ppc440spe_adma_remove - remove the asynch device
*/
-static int __devexit ppc440spe_adma_remove(struct of_device *ofdev)
+static int __devexit ppc440spe_adma_remove(struct platform_device *ofdev)
{
struct ppc440spe_adma_device *adev = dev_get_drvdata(&ofdev->dev);
struct device_node *np = ofdev->dev.of_node;
return ret;
}
-#if defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
static irqreturn_t sh_dmae_err(int irq, void *data)
{
struct sh_dmae_device *shdev = (struct sh_dmae_device *)data;
/* Default transfer size of 32 bytes requires 32-byte alignment */
shdev->common.copy_align = LOG2_DEFAULT_XFER_SIZE;
-#if defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
chanirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
if (!chanirq_res)
#else
chanirq_res = errirq_res;
-#endif /* CONFIG_CPU_SH4 */
+#endif /* CONFIG_CPU_SH4 || CONFIG_ARCH_SHMOBILE */
if (chanirq_res->start == chanirq_res->end &&
!platform_get_resource(pdev, IORESOURCE_IRQ, 1)) {
chan_probe_err:
sh_dmae_chan_remove(shdev);
eirqres:
-#if defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
free_irq(errirq, shdev);
eirq_err:
#endif
/* wake up device */
rc = pci_enable_device(pdev);
- if (rc == -EIO)
+ if (rc)
return rc;
/* now probe and enable the device */
/* wake up device */
rc = pci_enable_device(pdev);
- if (rc == -EIO)
+ if (rc)
return rc;
/* now probe and enable the device */
#endif
static u32 orig_l2_err_disable;
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_FSL_SOC_BOOKE
static u32 orig_hid1[2];
#endif
return IRQ_HANDLED;
}
-static int __devinit mpc85xx_pci_err_probe(struct of_device *op,
+static int __devinit mpc85xx_pci_err_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct edac_pci_ctl_info *pci;
return res;
}
-static int mpc85xx_pci_err_remove(struct of_device *op)
+static int mpc85xx_pci_err_remove(struct platform_device *op)
{
struct edac_pci_ctl_info *pci = dev_get_drvdata(&op->dev);
struct mpc85xx_pci_pdata *pdata = pci->pvt_info;
return IRQ_HANDLED;
}
-static int __devinit mpc85xx_l2_err_probe(struct of_device *op,
+static int __devinit mpc85xx_l2_err_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct edac_device_ctl_info *edac_dev;
return res;
}
-static int mpc85xx_l2_err_remove(struct of_device *op)
+static int mpc85xx_l2_err_remove(struct platform_device *op)
{
struct edac_device_ctl_info *edac_dev = dev_get_drvdata(&op->dev);
struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info;
{ .compatible = "fsl,mpc8555-l2-cache-controller", },
{ .compatible = "fsl,mpc8560-l2-cache-controller", },
{ .compatible = "fsl,mpc8568-l2-cache-controller", },
+ { .compatible = "fsl,mpc8569-l2-cache-controller", },
{ .compatible = "fsl,mpc8572-l2-cache-controller", },
+ { .compatible = "fsl,p1020-l2-cache-controller", },
+ { .compatible = "fsl,p1021-l2-cache-controller", },
{ .compatible = "fsl,p2020-l2-cache-controller", },
{},
};
}
}
-static int __devinit mpc85xx_mc_err_probe(struct of_device *op,
+static int __devinit mpc85xx_mc_err_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct mem_ctl_info *mci;
return res;
}
-static int mpc85xx_mc_err_remove(struct of_device *op)
+static int mpc85xx_mc_err_remove(struct platform_device *op)
{
struct mem_ctl_info *mci = dev_get_drvdata(&op->dev);
struct mpc85xx_mc_pdata *pdata = mci->pvt_info;
{ .compatible = "fsl,mpc8569-memory-controller", },
{ .compatible = "fsl,mpc8572-memory-controller", },
{ .compatible = "fsl,mpc8349-memory-controller", },
+ { .compatible = "fsl,p1020-memory-controller", },
+ { .compatible = "fsl,p1021-memory-controller", },
{ .compatible = "fsl,p2020-memory-controller", },
+ { .compatible = "fsl,p4080-memory-controller", },
{},
};
MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match);
},
};
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_FSL_SOC_BOOKE
static void __init mpc85xx_mc_clear_rfxe(void *data)
{
orig_hid1[smp_processor_id()] = mfspr(SPRN_HID1);
printk(KERN_WARNING EDAC_MOD_STR "PCI fails to register\n");
#endif
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_FSL_SOC_BOOKE
/*
* need to clear HID1[RFXE] to disable machine check int
* so we can catch it
module_init(mpc85xx_mc_init);
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_FSL_SOC_BOOKE
static void __exit mpc85xx_mc_restore_hid1(void *data)
{
mtspr(SPRN_HID1, orig_hid1[smp_processor_id()]);
static void __exit mpc85xx_mc_exit(void)
{
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_FSL_SOC_BOOKE
on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0);
#endif
#ifdef CONFIG_PCI
/* Function Prototypes */
-static int ppc4xx_edac_probe(struct of_device *device,
+static int ppc4xx_edac_probe(struct platform_device *device,
const struct of_device_id *device_id);
-static int ppc4xx_edac_remove(struct of_device *device);
+static int ppc4xx_edac_remove(struct platform_device *device);
/* Global Variables */
*/
static int __devinit
ppc4xx_edac_mc_init(struct mem_ctl_info *mci,
- struct of_device *op,
+ struct platform_device *op,
const struct of_device_id *match,
const dcr_host_t *dcr_host,
u32 mcopt1)
* mapped and assigned.
*/
static int __devinit
-ppc4xx_edac_register_irq(struct of_device *op, struct mem_ctl_info *mci)
+ppc4xx_edac_register_irq(struct platform_device *op, struct mem_ctl_info *mci)
{
int status = 0;
int ded_irq, sec_irq;
* driver; otherwise, < 0 on error.
*/
static int __devinit
-ppc4xx_edac_probe(struct of_device *op, const struct of_device_id *match)
+ppc4xx_edac_probe(struct platform_device *op, const struct of_device_id *match)
{
int status = 0;
u32 mcopt1, memcheck;
* Unconditionally returns 0.
*/
static int
-ppc4xx_edac_remove(struct of_device *op)
+ppc4xx_edac_remove(struct platform_device *op)
{
struct mem_ctl_info *mci = dev_get_drvdata(&op->dev);
struct ppc4xx_edac_pdata *pdata = mci->pvt_info;
is necessary for iSCSI Boot Firmware Table Attributes module to work
properly.
-config ISCSI_BOOT_SYSFS
- tristate "iSCSI Boot Sysfs Interface"
- default n
- help
- This option enables support for exposing iSCSI boot information
- via sysfs to userspace. If you wish to export this information,
- say Y. Otherwise, say N.
-
config ISCSI_IBFT
tristate "iSCSI Boot Firmware Table Attributes module"
select ISCSI_BOOT_SYSFS
- depends on ISCSI_IBFT_FIND
+ depends on ISCSI_IBFT_FIND && SCSI
default n
help
This option enables support for detection and exposing of iSCSI
obj-$(CONFIG_DMIID) += dmi-id.o
obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
-obj-$(CONFIG_ISCSI_BOOT_SYSFS) += iscsi_boot_sysfs.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
+++ /dev/null
-/*
- * Export the iSCSI boot info to userland via sysfs.
- *
- * Copyright (C) 2010 Red Hat, Inc. All rights reserved.
- * Copyright (C) 2010 Mike Christie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License v2.0 as published by
- * the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/capability.h>
-#include <linux/iscsi_boot_sysfs.h>
-
-
-MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>");
-MODULE_DESCRIPTION("sysfs interface and helpers to export iSCSI boot information");
-MODULE_LICENSE("GPL");
-/*
- * The kobject and attribute structures.
- */
-struct iscsi_boot_attr {
- struct attribute attr;
- int type;
- ssize_t (*show) (void *data, int type, char *buf);
-};
-
-/*
- * The routine called for all sysfs attributes.
- */
-static ssize_t iscsi_boot_show_attribute(struct kobject *kobj,
- struct attribute *attr, char *buf)
-{
- struct iscsi_boot_kobj *boot_kobj =
- container_of(kobj, struct iscsi_boot_kobj, kobj);
- struct iscsi_boot_attr *boot_attr =
- container_of(attr, struct iscsi_boot_attr, attr);
- ssize_t ret = -EIO;
- char *str = buf;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
-
- if (boot_kobj->show)
- ret = boot_kobj->show(boot_kobj->data, boot_attr->type, str);
- return ret;
-}
-
-static const struct sysfs_ops iscsi_boot_attr_ops = {
- .show = iscsi_boot_show_attribute,
-};
-
-static void iscsi_boot_kobj_release(struct kobject *kobj)
-{
- struct iscsi_boot_kobj *boot_kobj =
- container_of(kobj, struct iscsi_boot_kobj, kobj);
-
- kfree(boot_kobj->data);
- kfree(boot_kobj);
-}
-
-static struct kobj_type iscsi_boot_ktype = {
- .release = iscsi_boot_kobj_release,
- .sysfs_ops = &iscsi_boot_attr_ops,
-};
-
-#define iscsi_boot_rd_attr(fnname, sysfs_name, attr_type) \
-static struct iscsi_boot_attr iscsi_boot_attr_##fnname = { \
- .attr = { .name = __stringify(sysfs_name), .mode = 0444 }, \
- .type = attr_type, \
-}
-
-/* Target attrs */
-iscsi_boot_rd_attr(tgt_index, index, ISCSI_BOOT_TGT_INDEX);
-iscsi_boot_rd_attr(tgt_flags, flags, ISCSI_BOOT_TGT_FLAGS);
-iscsi_boot_rd_attr(tgt_ip, ip-addr, ISCSI_BOOT_TGT_IP_ADDR);
-iscsi_boot_rd_attr(tgt_port, port, ISCSI_BOOT_TGT_PORT);
-iscsi_boot_rd_attr(tgt_lun, lun, ISCSI_BOOT_TGT_LUN);
-iscsi_boot_rd_attr(tgt_chap, chap-type, ISCSI_BOOT_TGT_CHAP_TYPE);
-iscsi_boot_rd_attr(tgt_nic, nic-assoc, ISCSI_BOOT_TGT_NIC_ASSOC);
-iscsi_boot_rd_attr(tgt_name, target-name, ISCSI_BOOT_TGT_NAME);
-iscsi_boot_rd_attr(tgt_chap_name, chap-name, ISCSI_BOOT_TGT_CHAP_NAME);
-iscsi_boot_rd_attr(tgt_chap_secret, chap-secret, ISCSI_BOOT_TGT_CHAP_SECRET);
-iscsi_boot_rd_attr(tgt_chap_rev_name, rev-chap-name,
- ISCSI_BOOT_TGT_REV_CHAP_NAME);
-iscsi_boot_rd_attr(tgt_chap_rev_secret, rev-chap-name-secret,
- ISCSI_BOOT_TGT_REV_CHAP_SECRET);
-
-static struct attribute *target_attrs[] = {
- &iscsi_boot_attr_tgt_index.attr,
- &iscsi_boot_attr_tgt_flags.attr,
- &iscsi_boot_attr_tgt_ip.attr,
- &iscsi_boot_attr_tgt_port.attr,
- &iscsi_boot_attr_tgt_lun.attr,
- &iscsi_boot_attr_tgt_chap.attr,
- &iscsi_boot_attr_tgt_nic.attr,
- &iscsi_boot_attr_tgt_name.attr,
- &iscsi_boot_attr_tgt_chap_name.attr,
- &iscsi_boot_attr_tgt_chap_secret.attr,
- &iscsi_boot_attr_tgt_chap_rev_name.attr,
- &iscsi_boot_attr_tgt_chap_rev_secret.attr,
- NULL
-};
-
-static mode_t iscsi_boot_tgt_attr_is_visible(struct kobject *kobj,
- struct attribute *attr, int i)
-{
- struct iscsi_boot_kobj *boot_kobj =
- container_of(kobj, struct iscsi_boot_kobj, kobj);
-
- if (attr == &iscsi_boot_attr_tgt_index.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_INDEX);
- else if (attr == &iscsi_boot_attr_tgt_flags.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_FLAGS);
- else if (attr == &iscsi_boot_attr_tgt_ip.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_IP_ADDR);
- else if (attr == &iscsi_boot_attr_tgt_port.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_PORT);
- else if (attr == &iscsi_boot_attr_tgt_lun.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_LUN);
- else if (attr == &iscsi_boot_attr_tgt_chap.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_CHAP_TYPE);
- else if (attr == &iscsi_boot_attr_tgt_nic.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_NIC_ASSOC);
- else if (attr == &iscsi_boot_attr_tgt_name.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_NAME);
- else if (attr == &iscsi_boot_attr_tgt_chap_name.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_CHAP_NAME);
- else if (attr == &iscsi_boot_attr_tgt_chap_secret.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_CHAP_SECRET);
- else if (attr == &iscsi_boot_attr_tgt_chap_rev_name.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_REV_CHAP_NAME);
- else if (attr == &iscsi_boot_attr_tgt_chap_rev_secret.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_TGT_REV_CHAP_SECRET);
- return 0;
-}
-
-static struct attribute_group iscsi_boot_target_attr_group = {
- .attrs = target_attrs,
- .is_visible = iscsi_boot_tgt_attr_is_visible,
-};
-
-/* Ethernet attrs */
-iscsi_boot_rd_attr(eth_index, index, ISCSI_BOOT_ETH_INDEX);
-iscsi_boot_rd_attr(eth_flags, flags, ISCSI_BOOT_ETH_FLAGS);
-iscsi_boot_rd_attr(eth_ip, ip-addr, ISCSI_BOOT_ETH_IP_ADDR);
-iscsi_boot_rd_attr(eth_subnet, subnet-mask, ISCSI_BOOT_ETH_SUBNET_MASK);
-iscsi_boot_rd_attr(eth_origin, origin, ISCSI_BOOT_ETH_ORIGIN);
-iscsi_boot_rd_attr(eth_gateway, gateway, ISCSI_BOOT_ETH_GATEWAY);
-iscsi_boot_rd_attr(eth_primary_dns, primary-dns, ISCSI_BOOT_ETH_PRIMARY_DNS);
-iscsi_boot_rd_attr(eth_secondary_dns, secondary-dns,
- ISCSI_BOOT_ETH_SECONDARY_DNS);
-iscsi_boot_rd_attr(eth_dhcp, dhcp, ISCSI_BOOT_ETH_DHCP);
-iscsi_boot_rd_attr(eth_vlan, vlan, ISCSI_BOOT_ETH_VLAN);
-iscsi_boot_rd_attr(eth_mac, mac, ISCSI_BOOT_ETH_MAC);
-iscsi_boot_rd_attr(eth_hostname, hostname, ISCSI_BOOT_ETH_HOSTNAME);
-
-static struct attribute *ethernet_attrs[] = {
- &iscsi_boot_attr_eth_index.attr,
- &iscsi_boot_attr_eth_flags.attr,
- &iscsi_boot_attr_eth_ip.attr,
- &iscsi_boot_attr_eth_subnet.attr,
- &iscsi_boot_attr_eth_origin.attr,
- &iscsi_boot_attr_eth_gateway.attr,
- &iscsi_boot_attr_eth_primary_dns.attr,
- &iscsi_boot_attr_eth_secondary_dns.attr,
- &iscsi_boot_attr_eth_dhcp.attr,
- &iscsi_boot_attr_eth_vlan.attr,
- &iscsi_boot_attr_eth_mac.attr,
- &iscsi_boot_attr_eth_hostname.attr,
- NULL
-};
-
-static mode_t iscsi_boot_eth_attr_is_visible(struct kobject *kobj,
- struct attribute *attr, int i)
-{
- struct iscsi_boot_kobj *boot_kobj =
- container_of(kobj, struct iscsi_boot_kobj, kobj);
-
- if (attr == &iscsi_boot_attr_eth_index.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_INDEX);
- else if (attr == &iscsi_boot_attr_eth_flags.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_FLAGS);
- else if (attr == &iscsi_boot_attr_eth_ip.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_IP_ADDR);
- else if (attr == &iscsi_boot_attr_eth_subnet.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_SUBNET_MASK);
- else if (attr == &iscsi_boot_attr_eth_origin.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_ORIGIN);
- else if (attr == &iscsi_boot_attr_eth_gateway.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_GATEWAY);
- else if (attr == &iscsi_boot_attr_eth_primary_dns.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_PRIMARY_DNS);
- else if (attr == &iscsi_boot_attr_eth_secondary_dns.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_SECONDARY_DNS);
- else if (attr == &iscsi_boot_attr_eth_dhcp.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_DHCP);
- else if (attr == &iscsi_boot_attr_eth_vlan.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_VLAN);
- else if (attr == &iscsi_boot_attr_eth_mac.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_MAC);
- else if (attr == &iscsi_boot_attr_eth_hostname.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_ETH_HOSTNAME);
- return 0;
-}
-
-static struct attribute_group iscsi_boot_ethernet_attr_group = {
- .attrs = ethernet_attrs,
- .is_visible = iscsi_boot_eth_attr_is_visible,
-};
-
-/* Initiator attrs */
-iscsi_boot_rd_attr(ini_index, index, ISCSI_BOOT_INI_INDEX);
-iscsi_boot_rd_attr(ini_flags, flags, ISCSI_BOOT_INI_FLAGS);
-iscsi_boot_rd_attr(ini_isns, isns-server, ISCSI_BOOT_INI_ISNS_SERVER);
-iscsi_boot_rd_attr(ini_slp, slp-server, ISCSI_BOOT_INI_SLP_SERVER);
-iscsi_boot_rd_attr(ini_primary_radius, pri-radius-server,
- ISCSI_BOOT_INI_PRI_RADIUS_SERVER);
-iscsi_boot_rd_attr(ini_secondary_radius, sec-radius-server,
- ISCSI_BOOT_INI_SEC_RADIUS_SERVER);
-iscsi_boot_rd_attr(ini_name, initiator-name, ISCSI_BOOT_INI_INITIATOR_NAME);
-
-static struct attribute *initiator_attrs[] = {
- &iscsi_boot_attr_ini_index.attr,
- &iscsi_boot_attr_ini_flags.attr,
- &iscsi_boot_attr_ini_isns.attr,
- &iscsi_boot_attr_ini_slp.attr,
- &iscsi_boot_attr_ini_primary_radius.attr,
- &iscsi_boot_attr_ini_secondary_radius.attr,
- &iscsi_boot_attr_ini_name.attr,
- NULL
-};
-
-static mode_t iscsi_boot_ini_attr_is_visible(struct kobject *kobj,
- struct attribute *attr, int i)
-{
- struct iscsi_boot_kobj *boot_kobj =
- container_of(kobj, struct iscsi_boot_kobj, kobj);
-
- if (attr == &iscsi_boot_attr_ini_index.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_INI_INDEX);
- if (attr == &iscsi_boot_attr_ini_flags.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_INI_FLAGS);
- if (attr == &iscsi_boot_attr_ini_isns.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_INI_ISNS_SERVER);
- if (attr == &iscsi_boot_attr_ini_slp.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_INI_SLP_SERVER);
- if (attr == &iscsi_boot_attr_ini_primary_radius.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_INI_PRI_RADIUS_SERVER);
- if (attr == &iscsi_boot_attr_ini_secondary_radius.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_INI_SEC_RADIUS_SERVER);
- if (attr == &iscsi_boot_attr_ini_name.attr)
- return boot_kobj->is_visible(boot_kobj->data,
- ISCSI_BOOT_INI_INITIATOR_NAME);
-
- return 0;
-}
-
-static struct attribute_group iscsi_boot_initiator_attr_group = {
- .attrs = initiator_attrs,
- .is_visible = iscsi_boot_ini_attr_is_visible,
-};
-
-static struct iscsi_boot_kobj *
-iscsi_boot_create_kobj(struct iscsi_boot_kset *boot_kset,
- struct attribute_group *attr_group,
- const char *name, int index, void *data,
- ssize_t (*show) (void *data, int type, char *buf),
- mode_t (*is_visible) (void *data, int type))
-{
- struct iscsi_boot_kobj *boot_kobj;
-
- boot_kobj = kzalloc(sizeof(*boot_kobj), GFP_KERNEL);
- if (!boot_kobj)
- return NULL;
- INIT_LIST_HEAD(&boot_kobj->list);
-
- boot_kobj->kobj.kset = boot_kset->kset;
- if (kobject_init_and_add(&boot_kobj->kobj, &iscsi_boot_ktype,
- NULL, name, index)) {
- kfree(boot_kobj);
- return NULL;
- }
- boot_kobj->data = data;
- boot_kobj->show = show;
- boot_kobj->is_visible = is_visible;
-
- if (sysfs_create_group(&boot_kobj->kobj, attr_group)) {
- /*
- * We do not want to free this because the caller
- * will assume that since the creation call failed
- * the boot kobj was not setup and the normal release
- * path is not being run.
- */
- boot_kobj->data = NULL;
- kobject_put(&boot_kobj->kobj);
- return NULL;
- }
- boot_kobj->attr_group = attr_group;
-
- kobject_uevent(&boot_kobj->kobj, KOBJ_ADD);
- /* Nothing broke so lets add it to the list. */
- list_add_tail(&boot_kobj->list, &boot_kset->kobj_list);
- return boot_kobj;
-}
-
-static void iscsi_boot_remove_kobj(struct iscsi_boot_kobj *boot_kobj)
-{
- list_del(&boot_kobj->list);
- sysfs_remove_group(&boot_kobj->kobj, boot_kobj->attr_group);
- kobject_put(&boot_kobj->kobj);
-}
-
-/**
- * iscsi_boot_create_target() - create boot target sysfs dir
- * @boot_kset: boot kset
- * @index: the target id
- * @data: driver specific data for target
- * @show: attr show function
- * @is_visible: attr visibility function
- *
- * Note: The boot sysfs lib will free the data passed in for the caller
- * when all refs to the target kobject have been released.
- */
-struct iscsi_boot_kobj *
-iscsi_boot_create_target(struct iscsi_boot_kset *boot_kset, int index,
- void *data,
- ssize_t (*show) (void *data, int type, char *buf),
- mode_t (*is_visible) (void *data, int type))
-{
- return iscsi_boot_create_kobj(boot_kset, &iscsi_boot_target_attr_group,
- "target%d", index, data, show, is_visible);
-}
-EXPORT_SYMBOL_GPL(iscsi_boot_create_target);
-
-/**
- * iscsi_boot_create_initiator() - create boot initiator sysfs dir
- * @boot_kset: boot kset
- * @index: the initiator id
- * @data: driver specific data
- * @show: attr show function
- * @is_visible: attr visibility function
- *
- * Note: The boot sysfs lib will free the data passed in for the caller
- * when all refs to the initiator kobject have been released.
- */
-struct iscsi_boot_kobj *
-iscsi_boot_create_initiator(struct iscsi_boot_kset *boot_kset, int index,
- void *data,
- ssize_t (*show) (void *data, int type, char *buf),
- mode_t (*is_visible) (void *data, int type))
-{
- return iscsi_boot_create_kobj(boot_kset,
- &iscsi_boot_initiator_attr_group,
- "initiator", index, data, show,
- is_visible);
-}
-EXPORT_SYMBOL_GPL(iscsi_boot_create_initiator);
-
-/**
- * iscsi_boot_create_ethernet() - create boot ethernet sysfs dir
- * @boot_kset: boot kset
- * @index: the ethernet device id
- * @data: driver specific data
- * @show: attr show function
- * @is_visible: attr visibility function
- *
- * Note: The boot sysfs lib will free the data passed in for the caller
- * when all refs to the ethernet kobject have been released.
- */
-struct iscsi_boot_kobj *
-iscsi_boot_create_ethernet(struct iscsi_boot_kset *boot_kset, int index,
- void *data,
- ssize_t (*show) (void *data, int type, char *buf),
- mode_t (*is_visible) (void *data, int type))
-{
- return iscsi_boot_create_kobj(boot_kset,
- &iscsi_boot_ethernet_attr_group,
- "ethernet%d", index, data, show,
- is_visible);
-}
-EXPORT_SYMBOL_GPL(iscsi_boot_create_ethernet);
-
-/**
- * iscsi_boot_create_kset() - creates root sysfs tree
- * @set_name: name of root dir
- */
-struct iscsi_boot_kset *iscsi_boot_create_kset(const char *set_name)
-{
- struct iscsi_boot_kset *boot_kset;
-
- boot_kset = kzalloc(sizeof(*boot_kset), GFP_KERNEL);
- if (!boot_kset)
- return NULL;
-
- boot_kset->kset = kset_create_and_add(set_name, NULL, firmware_kobj);
- if (!boot_kset->kset) {
- kfree(boot_kset);
- return NULL;
- }
-
- INIT_LIST_HEAD(&boot_kset->kobj_list);
- return boot_kset;
-}
-EXPORT_SYMBOL_GPL(iscsi_boot_create_kset);
-
-/**
- * iscsi_boot_create_host_kset() - creates root sysfs tree for a scsi host
- * @hostno: host number of scsi host
- */
-struct iscsi_boot_kset *iscsi_boot_create_host_kset(unsigned int hostno)
-{
- struct iscsi_boot_kset *boot_kset;
- char *set_name;
-
- set_name = kasprintf(GFP_KERNEL, "iscsi_boot%u", hostno);
- if (!set_name)
- return NULL;
-
- boot_kset = iscsi_boot_create_kset(set_name);
- kfree(set_name);
- return boot_kset;
-}
-EXPORT_SYMBOL_GPL(iscsi_boot_create_host_kset);
-
-/**
- * iscsi_boot_destroy_kset() - destroy kset and kobjects under it
- * @boot_kset: boot kset
- *
- * This will remove the kset and kobjects and attrs under it.
- */
-void iscsi_boot_destroy_kset(struct iscsi_boot_kset *boot_kset)
-{
- struct iscsi_boot_kobj *boot_kobj, *tmp_kobj;
-
- list_for_each_entry_safe(boot_kobj, tmp_kobj,
- &boot_kset->kobj_list, list)
- iscsi_boot_remove_kobj(boot_kobj);
-
- kset_unregister(boot_kset->kset);
-}
-EXPORT_SYMBOL_GPL(iscsi_boot_destroy_kset);
static void ibft_cleanup(void)
{
- ibft_unregister();
- iscsi_boot_destroy_kset(boot_kset);
+ if (boot_kset) {
+ ibft_unregister();
+ iscsi_boot_destroy_kset(boot_kset);
+ }
}
static void __exit ibft_exit(void)
This driver provides an in-kernel interface to those GPIOs using
platform-neutral GPIO calls.
+config GPIO_SX150X
+ bool "Semtech SX150x I2C GPIO expander"
+ depends on I2C=y
+ default n
+ help
+ Say yes here to provide support for Semtech SX150-series I2C
+ GPIO expanders. Compatible models include:
+
+ 8 bits: sx1508q
+ 16 bits: sx1509q
+
+config GPIO_STMPE
+ bool "STMPE GPIOs"
+ depends on MFD_STMPE
+ help
+ This enables support for the GPIOs found on the STMPE I/O
+ Expanders.
+
config GPIO_TC35892
bool "TC35892 GPIOs"
depends on MFD_TC35892
obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
obj-$(CONFIG_GPIO_PL061) += pl061.o
+obj-$(CONFIG_GPIO_STMPE) += stmpe-gpio.o
obj-$(CONFIG_GPIO_TC35892) += tc35892-gpio.o
obj-$(CONFIG_GPIO_TIMBERDALE) += timbgpio.o
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_SCH) += sch_gpio.o
obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gpio.o
obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o
+obj-$(CONFIG_GPIO_SX150X) += sx150x.o
#define FLAG_TRIG_RISE 6 /* trigger on rising edge */
#define FLAG_ACTIVE_LOW 7 /* sysfs value has active low */
-#define PDESC_ID_SHIFT 16 /* add new flags before this one */
+#define ID_SHIFT 16 /* add new flags before this one */
-#define GPIO_FLAGS_MASK ((1 << PDESC_ID_SHIFT) - 1)
+#define GPIO_FLAGS_MASK ((1 << ID_SHIFT) - 1)
#define GPIO_TRIGGER_MASK (BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE))
#ifdef CONFIG_DEBUG_FS
static struct gpio_desc gpio_desc[ARCH_NR_GPIOS];
#ifdef CONFIG_GPIO_SYSFS
-struct poll_desc {
- struct work_struct work;
- struct sysfs_dirent *value_sd;
-};
-
-static struct idr pdesc_idr;
+static DEFINE_IDR(dirent_idr);
#endif
static inline void desc_set_label(struct gpio_desc *d, const char *label)
static irqreturn_t gpio_sysfs_irq(int irq, void *priv)
{
- struct work_struct *work = priv;
+ struct sysfs_dirent *value_sd = priv;
- schedule_work(work);
+ sysfs_notify_dirent(value_sd);
return IRQ_HANDLED;
}
-static void gpio_notify_sysfs(struct work_struct *work)
-{
- struct poll_desc *pdesc;
-
- pdesc = container_of(work, struct poll_desc, work);
- sysfs_notify_dirent(pdesc->value_sd);
-}
-
static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev,
unsigned long gpio_flags)
{
- struct poll_desc *pdesc;
+ struct sysfs_dirent *value_sd;
unsigned long irq_flags;
int ret, irq, id;
if (irq < 0)
return -EIO;
- id = desc->flags >> PDESC_ID_SHIFT;
- pdesc = idr_find(&pdesc_idr, id);
- if (pdesc) {
- free_irq(irq, &pdesc->work);
- cancel_work_sync(&pdesc->work);
- }
+ id = desc->flags >> ID_SHIFT;
+ value_sd = idr_find(&dirent_idr, id);
+ if (value_sd)
+ free_irq(irq, value_sd);
desc->flags &= ~GPIO_TRIGGER_MASK;
if (!gpio_flags) {
ret = 0;
- goto free_sd;
+ goto free_id;
}
irq_flags = IRQF_SHARED;
irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
- if (!pdesc) {
- pdesc = kmalloc(sizeof(*pdesc), GFP_KERNEL);
- if (!pdesc) {
- ret = -ENOMEM;
+ if (!value_sd) {
+ value_sd = sysfs_get_dirent(dev->kobj.sd, NULL, "value");
+ if (!value_sd) {
+ ret = -ENODEV;
goto err_out;
}
do {
ret = -ENOMEM;
- if (idr_pre_get(&pdesc_idr, GFP_KERNEL))
- ret = idr_get_new_above(&pdesc_idr,
- pdesc, 1, &id);
+ if (idr_pre_get(&dirent_idr, GFP_KERNEL))
+ ret = idr_get_new_above(&dirent_idr, value_sd,
+ 1, &id);
} while (ret == -EAGAIN);
if (ret)
- goto free_mem;
+ goto free_sd;
desc->flags &= GPIO_FLAGS_MASK;
- desc->flags |= (unsigned long)id << PDESC_ID_SHIFT;
+ desc->flags |= (unsigned long)id << ID_SHIFT;
- if (desc->flags >> PDESC_ID_SHIFT != id) {
+ if (desc->flags >> ID_SHIFT != id) {
ret = -ERANGE;
goto free_id;
}
-
- pdesc->value_sd = sysfs_get_dirent(dev->kobj.sd, NULL, "value");
- if (!pdesc->value_sd) {
- ret = -ENODEV;
- goto free_id;
- }
- INIT_WORK(&pdesc->work, gpio_notify_sysfs);
}
- ret = request_irq(irq, gpio_sysfs_irq, irq_flags,
- "gpiolib", &pdesc->work);
- if (ret)
- goto free_sd;
+ ret = request_any_context_irq(irq, gpio_sysfs_irq, irq_flags,
+ "gpiolib", value_sd);
+ if (ret < 0)
+ goto free_id;
desc->flags |= gpio_flags;
return 0;
-free_sd:
- if (pdesc)
- sysfs_put(pdesc->value_sd);
free_id:
- idr_remove(&pdesc_idr, id);
+ idr_remove(&dirent_idr, id);
desc->flags &= GPIO_FLAGS_MASK;
-free_mem:
- kfree(pdesc);
+free_sd:
+ if (value_sd)
+ sysfs_put(value_sd);
err_out:
return ret;
}
unsigned long flags;
unsigned gpio;
- idr_init(&pdesc_idr);
-
status = class_register(&gpio_class);
if (status < 0)
return status;
if (chip && test_bit(FLAG_REQUESTED, &desc->flags)) {
if (chip->free) {
spin_unlock_irqrestore(&gpio_lock, flags);
- might_sleep_if(extra_checks && chip->can_sleep);
+ might_sleep_if(chip->can_sleep);
chip->free(chip, gpio - chip->base);
spin_lock_irqsave(&gpio_lock, flags);
}
spin_unlock_irqrestore(&gpio_lock, flags);
- might_sleep_if(extra_checks && chip->can_sleep);
+ might_sleep_if(chip->can_sleep);
if (status) {
status = chip->request(chip, gpio);
spin_unlock_irqrestore(&gpio_lock, flags);
- might_sleep_if(extra_checks && chip->can_sleep);
+ might_sleep_if(chip->can_sleep);
if (status) {
status = chip->request(chip, gpio);
spin_unlock_irqrestore(&gpio_lock, flags);
- might_sleep_if(extra_checks && chip->can_sleep);
+ might_sleep_if(chip->can_sleep);
return chip->set_debounce(chip, gpio, debounce);
struct gpio_chip *chip;
chip = gpio_to_chip(gpio);
- WARN_ON(extra_checks && chip->can_sleep);
+ WARN_ON(chip->can_sleep);
return chip->get ? chip->get(chip, gpio - chip->base) : 0;
}
EXPORT_SYMBOL_GPL(__gpio_get_value);
struct gpio_chip *chip;
chip = gpio_to_chip(gpio);
- WARN_ON(extra_checks && chip->can_sleep);
+ WARN_ON(chip->can_sleep);
chip->set(chip, gpio - chip->base, value);
}
EXPORT_SYMBOL_GPL(__gpio_set_value);
{
struct max7301 *ts = container_of(chip, struct max7301, chip);
u8 *config;
- u8 offset_bits;
+ u8 offset_bits, pin_config;
int ret;
/* First 4 pins are unused in the controller */
config = &ts->port_config[offset >> 2];
+ if (ts->input_pullup_active & BIT(offset))
+ pin_config = PIN_CONFIG_IN_PULLUP;
+ else
+ pin_config = PIN_CONFIG_IN_WO_PULLUP;
+
mutex_lock(&ts->lock);
- /* Standard GPIO API doesn't support pull-ups, has to be extended.
- * Hard-coding no pollup for now. */
*config = (*config & ~(PIN_CONFIG_MASK << offset_bits))
- | (PIN_CONFIG_IN_WO_PULLUP << offset_bits);
+ | (pin_config << offset_bits);
ret = ts->write(ts->dev, 0x08 + (offset >> 2), *config);
/* Power up the chip and disable IRQ output */
ts->write(dev, 0x04, 0x01);
+ ts->input_pullup_active = pdata->input_pullup_active;
ts->chip.label = dev->driver->name;
ts->chip.direction_input = max7301_direction_input;
ts->chip.owner = THIS_MODULE;
/*
- * tristate all pins in hardware and cache the
+ * initialize pullups according to platform data and cache the
* register values for later use.
*/
for (i = 1; i < 8; i++) {
int j;
- /* 0xAA means input with internal pullup disabled */
- ts->write(dev, 0x08 + i, 0xAA);
+ /*
+ * initialize port_config with "0xAA", which means
+ * input with internal pullup disabled. This is needed
+ * to avoid writing zeros (in the inner for loop),
+ * which is not allowed according to the datasheet.
+ */
ts->port_config[i] = 0xAA;
for (j = 0; j < 4; j++) {
int offset = (i - 1) * 4 + j;
pdata = client->dev.platform_data;
if (!pdata) {
dev_dbg(&client->dev, "no platform data\n");
- return -EINVAL;
}
/* Allocate, initialize, and register this gpio_chip. */
mutex_init(&gpio->lock);
- gpio->chip.base = pdata->gpio_base;
+ gpio->chip.base = pdata ? pdata->gpio_base : -1;
gpio->chip.can_sleep = 1;
gpio->chip.dev = &client->dev;
gpio->chip.owner = THIS_MODULE;
* to zero, our software copy of the "latch" then matches the chip's
* all-ones reset state. Otherwise it flags pins to be driven low.
*/
- gpio->out = ~pdata->n_latch;
+ gpio->out = pdata ? ~pdata->n_latch : ~0;
status = gpiochip_add(&gpio->chip);
if (status < 0)
/* Let platform code set up the GPIOs and their users.
* Now is the first time anyone could use them.
*/
- if (pdata->setup) {
+ if (pdata && pdata->setup) {
status = pdata->setup(client,
gpio->chip.base, gpio->chip.ngpio,
pdata->context);
struct pcf857x *gpio = i2c_get_clientdata(client);
int status = 0;
- if (pdata->teardown) {
+ if (pdata && pdata->teardown) {
status = pdata->teardown(client,
gpio->chip.base, gpio->chip.ngpio,
pdata->context);
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stmpe.h>
+
+/*
+ * These registers are modified under the irq bus lock and cached to avoid
+ * unnecessary writes in bus_sync_unlock.
+ */
+enum { REG_RE, REG_FE, REG_IE };
+
+#define CACHE_NR_REGS 3
+#define CACHE_NR_BANKS (STMPE_NR_GPIOS / 8)
+
+struct stmpe_gpio {
+ struct gpio_chip chip;
+ struct stmpe *stmpe;
+ struct device *dev;
+ struct mutex irq_lock;
+
+ int irq_base;
+
+ /* Caches of interrupt control registers for bus_lock */
+ u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
+ u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
+};
+
+static inline struct stmpe_gpio *to_stmpe_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct stmpe_gpio, chip);
+}
+
+static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+ struct stmpe *stmpe = stmpe_gpio->stmpe;
+ u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB] - (offset / 8);
+ u8 mask = 1 << (offset % 8);
+ int ret;
+
+ ret = stmpe_reg_read(stmpe, reg);
+ if (ret < 0)
+ return ret;
+
+ return ret & mask;
+}
+
+static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+ struct stmpe *stmpe = stmpe_gpio->stmpe;
+ int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB;
+ u8 reg = stmpe->regs[which] - (offset / 8);
+ u8 mask = 1 << (offset % 8);
+
+ stmpe_reg_write(stmpe, reg, mask);
+}
+
+static int stmpe_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val)
+{
+ struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+ struct stmpe *stmpe = stmpe_gpio->stmpe;
+ u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
+ u8 mask = 1 << (offset % 8);
+
+ stmpe_gpio_set(chip, offset, val);
+
+ return stmpe_set_bits(stmpe, reg, mask, mask);
+}
+
+static int stmpe_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+ struct stmpe *stmpe = stmpe_gpio->stmpe;
+ u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
+ u8 mask = 1 << (offset % 8);
+
+ return stmpe_set_bits(stmpe, reg, mask, 0);
+}
+
+static int stmpe_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+
+ return stmpe_gpio->irq_base + offset;
+}
+
+static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
+ struct stmpe *stmpe = stmpe_gpio->stmpe;
+
+ return stmpe_set_altfunc(stmpe, 1 << offset, STMPE_BLOCK_GPIO);
+}
+
+static struct gpio_chip template_chip = {
+ .label = "stmpe",
+ .owner = THIS_MODULE,
+ .direction_input = stmpe_gpio_direction_input,
+ .get = stmpe_gpio_get,
+ .direction_output = stmpe_gpio_direction_output,
+ .set = stmpe_gpio_set,
+ .to_irq = stmpe_gpio_to_irq,
+ .request = stmpe_gpio_request,
+ .can_sleep = 1,
+};
+
+static int stmpe_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+ struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq);
+ int offset = irq - stmpe_gpio->irq_base;
+ int regoffset = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
+ return -EINVAL;
+
+ if (type == IRQ_TYPE_EDGE_RISING)
+ stmpe_gpio->regs[REG_RE][regoffset] |= mask;
+ else
+ stmpe_gpio->regs[REG_RE][regoffset] &= ~mask;
+
+ if (type == IRQ_TYPE_EDGE_FALLING)
+ stmpe_gpio->regs[REG_FE][regoffset] |= mask;
+ else
+ stmpe_gpio->regs[REG_FE][regoffset] &= ~mask;
+
+ return 0;
+}
+
+static void stmpe_gpio_irq_lock(unsigned int irq)
+{
+ struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq);
+
+ mutex_lock(&stmpe_gpio->irq_lock);
+}
+
+static void stmpe_gpio_irq_sync_unlock(unsigned int irq)
+{
+ struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq);
+ struct stmpe *stmpe = stmpe_gpio->stmpe;
+ int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
+ static const u8 regmap[] = {
+ [REG_RE] = STMPE_IDX_GPRER_LSB,
+ [REG_FE] = STMPE_IDX_GPFER_LSB,
+ [REG_IE] = STMPE_IDX_IEGPIOR_LSB,
+ };
+ int i, j;
+
+ for (i = 0; i < CACHE_NR_REGS; i++) {
+ for (j = 0; j < num_banks; j++) {
+ u8 old = stmpe_gpio->oldregs[i][j];
+ u8 new = stmpe_gpio->regs[i][j];
+
+ if (new == old)
+ continue;
+
+ stmpe_gpio->oldregs[i][j] = new;
+ stmpe_reg_write(stmpe, stmpe->regs[regmap[i]] - j, new);
+ }
+ }
+
+ mutex_unlock(&stmpe_gpio->irq_lock);
+}
+
+static void stmpe_gpio_irq_mask(unsigned int irq)
+{
+ struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq);
+ int offset = irq - stmpe_gpio->irq_base;
+ int regoffset = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ stmpe_gpio->regs[REG_IE][regoffset] &= ~mask;
+}
+
+static void stmpe_gpio_irq_unmask(unsigned int irq)
+{
+ struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq);
+ int offset = irq - stmpe_gpio->irq_base;
+ int regoffset = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ stmpe_gpio->regs[REG_IE][regoffset] |= mask;
+}
+
+static struct irq_chip stmpe_gpio_irq_chip = {
+ .name = "stmpe-gpio",
+ .bus_lock = stmpe_gpio_irq_lock,
+ .bus_sync_unlock = stmpe_gpio_irq_sync_unlock,
+ .mask = stmpe_gpio_irq_mask,
+ .unmask = stmpe_gpio_irq_unmask,
+ .set_type = stmpe_gpio_irq_set_type,
+};
+
+static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
+{
+ struct stmpe_gpio *stmpe_gpio = dev;
+ struct stmpe *stmpe = stmpe_gpio->stmpe;
+ u8 statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB];
+ int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
+ u8 status[num_banks];
+ int ret;
+ int i;
+
+ ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status);
+ if (ret < 0)
+ return IRQ_NONE;
+
+ for (i = 0; i < num_banks; i++) {
+ int bank = num_banks - i - 1;
+ unsigned int enabled = stmpe_gpio->regs[REG_IE][bank];
+ unsigned int stat = status[i];
+
+ stat &= enabled;
+ if (!stat)
+ continue;
+
+ while (stat) {
+ int bit = __ffs(stat);
+ int line = bank * 8 + bit;
+
+ handle_nested_irq(stmpe_gpio->irq_base + line);
+ stat &= ~(1 << bit);
+ }
+
+ stmpe_reg_write(stmpe, statmsbreg + i, status[i]);
+ stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,
+ status[i]);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
+{
+ int base = stmpe_gpio->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
+ set_irq_chip_data(irq, stmpe_gpio);
+ set_irq_chip_and_handler(irq, &stmpe_gpio_irq_chip,
+ handle_simple_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ return 0;
+}
+
+static void stmpe_gpio_irq_remove(struct stmpe_gpio *stmpe_gpio)
+{
+ int base = stmpe_gpio->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#endif
+ set_irq_chip_and_handler(irq, NULL, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+}
+
+static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
+{
+ struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+ struct stmpe_gpio_platform_data *pdata;
+ struct stmpe_gpio *stmpe_gpio;
+ int ret;
+ int irq;
+
+ pdata = stmpe->pdata->gpio;
+ if (!pdata)
+ return -ENODEV;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL);
+ if (!stmpe_gpio)
+ return -ENOMEM;
+
+ mutex_init(&stmpe_gpio->irq_lock);
+
+ stmpe_gpio->dev = &pdev->dev;
+ stmpe_gpio->stmpe = stmpe;
+
+ stmpe_gpio->chip = template_chip;
+ stmpe_gpio->chip.ngpio = stmpe->num_gpios;
+ stmpe_gpio->chip.dev = &pdev->dev;
+ stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
+
+ stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
+
+ ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
+ if (ret)
+ return ret;
+
+ ret = stmpe_gpio_irq_init(stmpe_gpio);
+ if (ret)
+ goto out_free;
+
+ ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq, IRQF_ONESHOT,
+ "stmpe-gpio", stmpe_gpio);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+ goto out_removeirq;
+ }
+
+ ret = gpiochip_add(&stmpe_gpio->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
+ goto out_freeirq;
+ }
+
+ if (pdata && pdata->setup)
+ pdata->setup(stmpe, stmpe_gpio->chip.base);
+
+ platform_set_drvdata(pdev, stmpe_gpio);
+
+ return 0;
+
+out_freeirq:
+ free_irq(irq, stmpe_gpio);
+out_removeirq:
+ stmpe_gpio_irq_remove(stmpe_gpio);
+out_free:
+ kfree(stmpe_gpio);
+ return ret;
+}
+
+static int __devexit stmpe_gpio_remove(struct platform_device *pdev)
+{
+ struct stmpe_gpio *stmpe_gpio = platform_get_drvdata(pdev);
+ struct stmpe *stmpe = stmpe_gpio->stmpe;
+ struct stmpe_gpio_platform_data *pdata = stmpe->pdata->gpio;
+ int irq = platform_get_irq(pdev, 0);
+ int ret;
+
+ if (pdata && pdata->remove)
+ pdata->remove(stmpe, stmpe_gpio->chip.base);
+
+ ret = gpiochip_remove(&stmpe_gpio->chip);
+ if (ret < 0) {
+ dev_err(stmpe_gpio->dev,
+ "unable to remove gpiochip: %d\n", ret);
+ return ret;
+ }
+
+ stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
+
+ free_irq(irq, stmpe_gpio);
+ stmpe_gpio_irq_remove(stmpe_gpio);
+ platform_set_drvdata(pdev, NULL);
+ kfree(stmpe_gpio);
+
+ return 0;
+}
+
+static struct platform_driver stmpe_gpio_driver = {
+ .driver.name = "stmpe-gpio",
+ .driver.owner = THIS_MODULE,
+ .probe = stmpe_gpio_probe,
+ .remove = __devexit_p(stmpe_gpio_remove),
+};
+
+static int __init stmpe_gpio_init(void)
+{
+ return platform_driver_register(&stmpe_gpio_driver);
+}
+subsys_initcall(stmpe_gpio_init);
+
+static void __exit stmpe_gpio_exit(void)
+{
+ platform_driver_unregister(&stmpe_gpio_driver);
+}
+module_exit(stmpe_gpio_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPExxxx GPIO driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");
--- /dev/null
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/i2c/sx150x.h>
+
+struct sx150x_device_data {
+ u8 reg_pullup;
+ u8 reg_pulldn;
+ u8 reg_drain;
+ u8 reg_polarity;
+ u8 reg_dir;
+ u8 reg_data;
+ u8 reg_irq_mask;
+ u8 reg_irq_src;
+ u8 reg_sense;
+ u8 reg_clock;
+ u8 reg_misc;
+ u8 reg_reset;
+ u8 ngpios;
+};
+
+struct sx150x_chip {
+ struct gpio_chip gpio_chip;
+ struct i2c_client *client;
+ const struct sx150x_device_data *dev_cfg;
+ int irq_summary;
+ int irq_base;
+ u32 irq_sense;
+ unsigned long irq_set_type_pending;
+ struct irq_chip irq_chip;
+ struct mutex lock;
+};
+
+static const struct sx150x_device_data sx150x_devices[] = {
+ [0] = { /* sx1508q */
+ .reg_pullup = 0x03,
+ .reg_pulldn = 0x04,
+ .reg_drain = 0x05,
+ .reg_polarity = 0x06,
+ .reg_dir = 0x07,
+ .reg_data = 0x08,
+ .reg_irq_mask = 0x09,
+ .reg_irq_src = 0x0c,
+ .reg_sense = 0x0b,
+ .reg_clock = 0x0f,
+ .reg_misc = 0x10,
+ .reg_reset = 0x7d,
+ .ngpios = 8
+ },
+ [1] = { /* sx1509q */
+ .reg_pullup = 0x07,
+ .reg_pulldn = 0x09,
+ .reg_drain = 0x0b,
+ .reg_polarity = 0x0d,
+ .reg_dir = 0x0f,
+ .reg_data = 0x11,
+ .reg_irq_mask = 0x13,
+ .reg_irq_src = 0x19,
+ .reg_sense = 0x17,
+ .reg_clock = 0x1e,
+ .reg_misc = 0x1f,
+ .reg_reset = 0x7d,
+ .ngpios = 16
+ },
+};
+
+static const struct i2c_device_id sx150x_id[] = {
+ {"sx1508q", 0},
+ {"sx1509q", 1},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, sx150x_id);
+
+static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ s32 err = i2c_smbus_write_byte_data(client, reg, val);
+
+ if (err < 0)
+ dev_warn(&client->dev,
+ "i2c write fail: can't write %02x to %02x: %d\n",
+ val, reg, err);
+ return err;
+}
+
+static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
+{
+ s32 err = i2c_smbus_read_byte_data(client, reg);
+
+ if (err >= 0)
+ *val = err;
+ else
+ dev_warn(&client->dev,
+ "i2c read fail: can't read from %02x: %d\n",
+ reg, err);
+ return err;
+}
+
+static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset)
+{
+ return (chip->dev_cfg->ngpios == offset);
+}
+
+/*
+ * These utility functions solve the common problem of locating and setting
+ * configuration bits. Configuration bits are grouped into registers
+ * whose indexes increase downwards. For example, with eight-bit registers,
+ * sixteen gpios would have their config bits grouped in the following order:
+ * REGISTER N-1 [ f e d c b a 9 8 ]
+ * N [ 7 6 5 4 3 2 1 0 ]
+ *
+ * For multi-bit configurations, the pattern gets wider:
+ * REGISTER N-3 [ f f e e d d c c ]
+ * N-2 [ b b a a 9 9 8 8 ]
+ * N-1 [ 7 7 6 6 5 5 4 4 ]
+ * N [ 3 3 2 2 1 1 0 0 ]
+ *
+ * Given the address of the starting register 'N', the index of the gpio
+ * whose configuration we seek to change, and the width in bits of that
+ * configuration, these functions allow us to locate the correct
+ * register and mask the correct bits.
+ */
+static inline void sx150x_find_cfg(u8 offset, u8 width,
+ u8 *reg, u8 *mask, u8 *shift)
+{
+ *reg -= offset * width / 8;
+ *mask = (1 << width) - 1;
+ *shift = (offset * width) % 8;
+ *mask <<= *shift;
+}
+
+static s32 sx150x_write_cfg(struct sx150x_chip *chip,
+ u8 offset, u8 width, u8 reg, u8 val)
+{
+ u8 mask;
+ u8 data;
+ u8 shift;
+ s32 err;
+
+ sx150x_find_cfg(offset, width, ®, &mask, &shift);
+ err = sx150x_i2c_read(chip->client, reg, &data);
+ if (err < 0)
+ return err;
+
+ data &= ~mask;
+ data |= (val << shift) & mask;
+ return sx150x_i2c_write(chip->client, reg, data);
+}
+
+static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
+{
+ u8 reg = chip->dev_cfg->reg_data;
+ u8 mask;
+ u8 data;
+ u8 shift;
+ s32 err;
+
+ sx150x_find_cfg(offset, 1, ®, &mask, &shift);
+ err = sx150x_i2c_read(chip->client, reg, &data);
+ if (err >= 0)
+ err = (data & mask) != 0 ? 1 : 0;
+
+ return err;
+}
+
+static void sx150x_set_oscio(struct sx150x_chip *chip, int val)
+{
+ sx150x_i2c_write(chip->client,
+ chip->dev_cfg->reg_clock,
+ (val ? 0x1f : 0x10));
+}
+
+static void sx150x_set_io(struct sx150x_chip *chip, unsigned offset, int val)
+{
+ sx150x_write_cfg(chip,
+ offset,
+ 1,
+ chip->dev_cfg->reg_data,
+ (val ? 1 : 0));
+}
+
+static int sx150x_io_input(struct sx150x_chip *chip, unsigned offset)
+{
+ return sx150x_write_cfg(chip,
+ offset,
+ 1,
+ chip->dev_cfg->reg_dir,
+ 1);
+}
+
+static int sx150x_io_output(struct sx150x_chip *chip, unsigned offset, int val)
+{
+ int err;
+
+ err = sx150x_write_cfg(chip,
+ offset,
+ 1,
+ chip->dev_cfg->reg_data,
+ (val ? 1 : 0));
+ if (err >= 0)
+ err = sx150x_write_cfg(chip,
+ offset,
+ 1,
+ chip->dev_cfg->reg_dir,
+ 0);
+ return err;
+}
+
+static int sx150x_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ struct sx150x_chip *chip;
+ int status = -EINVAL;
+
+ chip = container_of(gc, struct sx150x_chip, gpio_chip);
+
+ if (!offset_is_oscio(chip, offset)) {
+ mutex_lock(&chip->lock);
+ status = sx150x_get_io(chip, offset);
+ mutex_unlock(&chip->lock);
+ }
+
+ return status;
+}
+
+static void sx150x_gpio_set(struct gpio_chip *gc, unsigned offset, int val)
+{
+ struct sx150x_chip *chip;
+
+ chip = container_of(gc, struct sx150x_chip, gpio_chip);
+
+ mutex_lock(&chip->lock);
+ if (offset_is_oscio(chip, offset))
+ sx150x_set_oscio(chip, val);
+ else
+ sx150x_set_io(chip, offset, val);
+ mutex_unlock(&chip->lock);
+}
+
+static int sx150x_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ struct sx150x_chip *chip;
+ int status = -EINVAL;
+
+ chip = container_of(gc, struct sx150x_chip, gpio_chip);
+
+ if (!offset_is_oscio(chip, offset)) {
+ mutex_lock(&chip->lock);
+ status = sx150x_io_input(chip, offset);
+ mutex_unlock(&chip->lock);
+ }
+ return status;
+}
+
+static int sx150x_gpio_direction_output(struct gpio_chip *gc,
+ unsigned offset,
+ int val)
+{
+ struct sx150x_chip *chip;
+ int status = 0;
+
+ chip = container_of(gc, struct sx150x_chip, gpio_chip);
+
+ if (!offset_is_oscio(chip, offset)) {
+ mutex_lock(&chip->lock);
+ status = sx150x_io_output(chip, offset, val);
+ mutex_unlock(&chip->lock);
+ }
+ return status;
+}
+
+static int sx150x_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+ struct sx150x_chip *chip;
+
+ chip = container_of(gc, struct sx150x_chip, gpio_chip);
+
+ if (offset >= chip->dev_cfg->ngpios)
+ return -EINVAL;
+
+ if (chip->irq_base < 0)
+ return -EINVAL;
+
+ return chip->irq_base + offset;
+}
+
+static void sx150x_irq_mask(unsigned int irq)
+{
+ struct irq_chip *ic = get_irq_chip(irq);
+ struct sx150x_chip *chip;
+ unsigned n;
+
+ chip = container_of(ic, struct sx150x_chip, irq_chip);
+ n = irq - chip->irq_base;
+
+ sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 1);
+ sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, 0);
+}
+
+static void sx150x_irq_unmask(unsigned int irq)
+{
+ struct irq_chip *ic = get_irq_chip(irq);
+ struct sx150x_chip *chip;
+ unsigned n;
+
+ chip = container_of(ic, struct sx150x_chip, irq_chip);
+ n = irq - chip->irq_base;
+
+ sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 0);
+ sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense,
+ chip->irq_sense >> (n * 2));
+}
+
+static int sx150x_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ struct irq_chip *ic = get_irq_chip(irq);
+ struct sx150x_chip *chip;
+ unsigned n, val = 0;
+
+ if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ return -EINVAL;
+
+ chip = container_of(ic, struct sx150x_chip, irq_chip);
+ n = irq - chip->irq_base;
+
+ if (flow_type & IRQ_TYPE_EDGE_RISING)
+ val |= 0x1;
+ if (flow_type & IRQ_TYPE_EDGE_FALLING)
+ val |= 0x2;
+
+ chip->irq_sense &= ~(3UL << (n * 2));
+ chip->irq_sense |= val << (n * 2);
+ chip->irq_set_type_pending |= BIT(n);
+ return 0;
+}
+
+static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id)
+{
+ struct sx150x_chip *chip = (struct sx150x_chip *)dev_id;
+ unsigned nhandled = 0;
+ unsigned sub_irq;
+ unsigned n;
+ s32 err;
+ u8 val;
+ int i;
+
+ for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) {
+ err = sx150x_i2c_read(chip->client,
+ chip->dev_cfg->reg_irq_src - i,
+ &val);
+ if (err < 0)
+ continue;
+
+ sx150x_i2c_write(chip->client,
+ chip->dev_cfg->reg_irq_src - i,
+ val);
+ for (n = 0; n < 8; ++n) {
+ if (val & (1 << n)) {
+ sub_irq = chip->irq_base + (i * 8) + n;
+ handle_nested_irq(sub_irq);
+ ++nhandled;
+ }
+ }
+ }
+
+ return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
+}
+
+static void sx150x_irq_bus_lock(unsigned int irq)
+{
+ struct irq_chip *ic = get_irq_chip(irq);
+ struct sx150x_chip *chip;
+
+ chip = container_of(ic, struct sx150x_chip, irq_chip);
+
+ mutex_lock(&chip->lock);
+}
+
+static void sx150x_irq_bus_sync_unlock(unsigned int irq)
+{
+ struct irq_chip *ic = get_irq_chip(irq);
+ struct sx150x_chip *chip;
+ unsigned n;
+
+ chip = container_of(ic, struct sx150x_chip, irq_chip);
+
+ while (chip->irq_set_type_pending) {
+ n = __ffs(chip->irq_set_type_pending);
+ chip->irq_set_type_pending &= ~BIT(n);
+ if (!(irq_to_desc(n + chip->irq_base)->status & IRQ_MASKED))
+ sx150x_write_cfg(chip, n, 2,
+ chip->dev_cfg->reg_sense,
+ chip->irq_sense >> (n * 2));
+ }
+
+ mutex_unlock(&chip->lock);
+}
+
+static void sx150x_init_chip(struct sx150x_chip *chip,
+ struct i2c_client *client,
+ kernel_ulong_t driver_data,
+ struct sx150x_platform_data *pdata)
+{
+ mutex_init(&chip->lock);
+
+ chip->client = client;
+ chip->dev_cfg = &sx150x_devices[driver_data];
+ chip->gpio_chip.label = client->name;
+ chip->gpio_chip.direction_input = sx150x_gpio_direction_input;
+ chip->gpio_chip.direction_output = sx150x_gpio_direction_output;
+ chip->gpio_chip.get = sx150x_gpio_get;
+ chip->gpio_chip.set = sx150x_gpio_set;
+ chip->gpio_chip.to_irq = sx150x_gpio_to_irq;
+ chip->gpio_chip.base = pdata->gpio_base;
+ chip->gpio_chip.can_sleep = 1;
+ chip->gpio_chip.ngpio = chip->dev_cfg->ngpios;
+ if (pdata->oscio_is_gpo)
+ ++chip->gpio_chip.ngpio;
+
+ chip->irq_chip.name = client->name;
+ chip->irq_chip.mask = sx150x_irq_mask;
+ chip->irq_chip.unmask = sx150x_irq_unmask;
+ chip->irq_chip.set_type = sx150x_irq_set_type;
+ chip->irq_chip.bus_lock = sx150x_irq_bus_lock;
+ chip->irq_chip.bus_sync_unlock = sx150x_irq_bus_sync_unlock;
+ chip->irq_summary = -1;
+ chip->irq_base = -1;
+ chip->irq_sense = 0;
+ chip->irq_set_type_pending = 0;
+}
+
+static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg)
+{
+ int err = 0;
+ unsigned n;
+
+ for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n)
+ err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8));
+ return err;
+}
+
+static int sx150x_init_hw(struct sx150x_chip *chip,
+ struct sx150x_platform_data *pdata)
+{
+ int err = 0;
+
+ err = i2c_smbus_write_word_data(chip->client,
+ chip->dev_cfg->reg_reset,
+ 0x3412);
+ if (err < 0)
+ return err;
+
+ err = sx150x_i2c_write(chip->client,
+ chip->dev_cfg->reg_misc,
+ 0x01);
+ if (err < 0)
+ return err;
+
+ err = sx150x_init_io(chip, chip->dev_cfg->reg_pullup,
+ pdata->io_pullup_ena);
+ if (err < 0)
+ return err;
+
+ err = sx150x_init_io(chip, chip->dev_cfg->reg_pulldn,
+ pdata->io_pulldn_ena);
+ if (err < 0)
+ return err;
+
+ err = sx150x_init_io(chip, chip->dev_cfg->reg_drain,
+ pdata->io_open_drain_ena);
+ if (err < 0)
+ return err;
+
+ err = sx150x_init_io(chip, chip->dev_cfg->reg_polarity,
+ pdata->io_polarity);
+ if (err < 0)
+ return err;
+
+ if (pdata->oscio_is_gpo)
+ sx150x_set_oscio(chip, 0);
+
+ return err;
+}
+
+static int sx150x_install_irq_chip(struct sx150x_chip *chip,
+ int irq_summary,
+ int irq_base)
+{
+ int err;
+ unsigned n;
+ unsigned irq;
+
+ chip->irq_summary = irq_summary;
+ chip->irq_base = irq_base;
+
+ for (n = 0; n < chip->dev_cfg->ngpios; ++n) {
+ irq = irq_base + n;
+ set_irq_chip_and_handler(irq, &chip->irq_chip, handle_edge_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ err = request_threaded_irq(irq_summary,
+ NULL,
+ sx150x_irq_thread_fn,
+ IRQF_SHARED | IRQF_TRIGGER_FALLING,
+ chip->irq_chip.name,
+ chip);
+ if (err < 0) {
+ chip->irq_summary = -1;
+ chip->irq_base = -1;
+ }
+
+ return err;
+}
+
+static void sx150x_remove_irq_chip(struct sx150x_chip *chip)
+{
+ unsigned n;
+ unsigned irq;
+
+ free_irq(chip->irq_summary, chip);
+
+ for (n = 0; n < chip->dev_cfg->ngpios; ++n) {
+ irq = chip->irq_base + n;
+ set_irq_handler(irq, NULL);
+ set_irq_chip(irq, NULL);
+ }
+}
+
+static int __devinit sx150x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WRITE_WORD_DATA;
+ struct sx150x_platform_data *pdata;
+ struct sx150x_chip *chip;
+ int rc;
+
+ pdata = client->dev.platform_data;
+ if (!pdata)
+ return -EINVAL;
+
+ if (!i2c_check_functionality(client->adapter, i2c_funcs))
+ return -ENOSYS;
+
+ chip = kzalloc(sizeof(struct sx150x_chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ sx150x_init_chip(chip, client, id->driver_data, pdata);
+ rc = sx150x_init_hw(chip, pdata);
+ if (rc < 0)
+ goto probe_fail_pre_gpiochip_add;
+
+ rc = gpiochip_add(&chip->gpio_chip);
+ if (rc < 0)
+ goto probe_fail_pre_gpiochip_add;
+
+ if (pdata->irq_summary >= 0) {
+ rc = sx150x_install_irq_chip(chip,
+ pdata->irq_summary,
+ pdata->irq_base);
+ if (rc < 0)
+ goto probe_fail_post_gpiochip_add;
+ }
+
+ i2c_set_clientdata(client, chip);
+
+ return 0;
+probe_fail_post_gpiochip_add:
+ WARN_ON(gpiochip_remove(&chip->gpio_chip) < 0);
+probe_fail_pre_gpiochip_add:
+ kfree(chip);
+ return rc;
+}
+
+static int __devexit sx150x_remove(struct i2c_client *client)
+{
+ struct sx150x_chip *chip;
+ int rc;
+
+ chip = i2c_get_clientdata(client);
+ rc = gpiochip_remove(&chip->gpio_chip);
+ if (rc < 0)
+ return rc;
+
+ if (chip->irq_summary >= 0)
+ sx150x_remove_irq_chip(chip);
+
+ kfree(chip);
+
+ return 0;
+}
+
+static struct i2c_driver sx150x_driver = {
+ .driver = {
+ .name = "sx150x",
+ .owner = THIS_MODULE
+ },
+ .probe = sx150x_probe,
+ .remove = __devexit_p(sx150x_remove),
+ .id_table = sx150x_id,
+};
+
+static int __init sx150x_init(void)
+{
+ return i2c_add_driver(&sx150x_driver);
+}
+subsys_initcall(sx150x_init);
+
+static void __exit sx150x_exit(void)
+{
+ return i2c_del_driver(&sx150x_driver);
+}
+module_exit(sx150x_exit);
+
+MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
+MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("i2c:sx150x");
return wm831x->irq_base + WM831X_IRQ_GPIO_1 + offset;
}
+static int wm831x_gpio_set_debounce(struct gpio_chip *chip, unsigned offset,
+ unsigned debounce)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+ int reg = WM831X_GPIO1_CONTROL + offset;
+ int ret, fn;
+
+ ret = wm831x_reg_read(wm831x, reg);
+ if (ret < 0)
+ return ret;
+
+ switch (ret & WM831X_GPN_FN_MASK) {
+ case 0:
+ case 1:
+ break;
+ default:
+ /* Not in GPIO mode */
+ return -EBUSY;
+ }
+
+ if (debounce >= 32 && debounce <= 64)
+ fn = 0;
+ else if (debounce >= 4000 && debounce <= 8000)
+ fn = 1;
+ else
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_GPN_FN_MASK, fn);
+}
+
#ifdef CONFIG_DEBUG_FS
static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
.direction_output = wm831x_gpio_direction_out,
.set = wm831x_gpio_set,
.to_irq = wm831x_gpio_to_irq,
+ .set_debounce = wm831x_gpio_set_debounce,
.dbg_show = wm831x_gpio_dbg_show,
.can_sleep = 1,
};
/* we need to support large memory configurations */
entry->busaddr[i] = pci_map_page(dev->pdev, entry->pagelist[i],
0, PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
- if (entry->busaddr[i] == 0) {
+ if (pci_dma_mapping_error(dev->pdev, entry->busaddr[i])) {
DRM_ERROR("unable to map PCIGART pages!\n");
drm_ati_pcigart_cleanup(dev, gart_info);
address = NULL;
return -EINVAL;
}
- list = kmalloc(sizeof(*list), GFP_KERNEL);
+ list = kzalloc(sizeof(*list), GFP_KERNEL);
if (!list) {
if (map->type == _DRM_REGISTERS)
iounmap(map->handle);
kfree(map);
return -EINVAL;
}
- memset(list, 0, sizeof(*list));
list->map = map;
mutex_lock(&dev->struct_mutex);
return -EINVAL;
}
- entry->buflist = kmalloc(count * sizeof(*entry->buflist), GFP_KERNEL);
+ entry->buflist = kzalloc(count * sizeof(*entry->buflist), GFP_KERNEL);
if (!entry->buflist) {
mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
- memset(entry->buflist, 0, count * sizeof(*entry->buflist));
entry->buf_size = size;
entry->page_order = page_order;
buf->file_priv = NULL;
buf->dev_priv_size = dev->driver->dev_priv_size;
- buf->dev_private = kmalloc(buf->dev_priv_size, GFP_KERNEL);
+ buf->dev_private = kzalloc(buf->dev_priv_size, GFP_KERNEL);
if (!buf->dev_private) {
/* Set count correctly so we free the proper amount. */
entry->buf_count = count;
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
- memset(buf->dev_private, 0, buf->dev_priv_size);
DRM_DEBUG("buffer %d @ %p\n", entry->buf_count, buf->address);
return -EINVAL;
}
- entry->buflist = kmalloc(count * sizeof(*entry->buflist), GFP_KERNEL);
+ entry->buflist = kzalloc(count * sizeof(*entry->buflist), GFP_KERNEL);
if (!entry->buflist) {
mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
- memset(entry->buflist, 0, count * sizeof(*entry->buflist));
- entry->seglist = kmalloc(count * sizeof(*entry->seglist), GFP_KERNEL);
+ entry->seglist = kzalloc(count * sizeof(*entry->seglist), GFP_KERNEL);
if (!entry->seglist) {
kfree(entry->buflist);
mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
- memset(entry->seglist, 0, count * sizeof(*entry->seglist));
/* Keep the original pagelist until we know all the allocations
* have succeeded
buf->file_priv = NULL;
buf->dev_priv_size = dev->driver->dev_priv_size;
- buf->dev_private = kmalloc(buf->dev_priv_size,
- GFP_KERNEL);
+ buf->dev_private = kzalloc(buf->dev_priv_size,
+ GFP_KERNEL);
if (!buf->dev_private) {
/* Set count correctly so we free the proper amount. */
entry->buf_count = count;
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
- memset(buf->dev_private, 0, buf->dev_priv_size);
DRM_DEBUG("buffer %d @ %p\n",
entry->buf_count, buf->address);
return -EINVAL;
}
- entry->buflist = kmalloc(count * sizeof(*entry->buflist),
+ entry->buflist = kzalloc(count * sizeof(*entry->buflist),
GFP_KERNEL);
if (!entry->buflist) {
mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
- memset(entry->buflist, 0, count * sizeof(*entry->buflist));
entry->buf_size = size;
entry->page_order = page_order;
buf->file_priv = NULL;
buf->dev_priv_size = dev->driver->dev_priv_size;
- buf->dev_private = kmalloc(buf->dev_priv_size, GFP_KERNEL);
+ buf->dev_private = kzalloc(buf->dev_priv_size, GFP_KERNEL);
if (!buf->dev_private) {
/* Set count correctly so we free the proper amount. */
entry->buf_count = count;
return -ENOMEM;
}
- memset(buf->dev_private, 0, buf->dev_priv_size);
-
DRM_DEBUG("buffer %d @ %p\n", entry->buf_count, buf->address);
offset += alignment;
return -EINVAL;
}
- entry->buflist = kmalloc(count * sizeof(*entry->buflist),
+ entry->buflist = kzalloc(count * sizeof(*entry->buflist),
GFP_KERNEL);
if (!entry->buflist) {
mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
- memset(entry->buflist, 0, count * sizeof(*entry->buflist));
entry->buf_size = size;
entry->page_order = page_order;
buf->file_priv = NULL;
buf->dev_priv_size = dev->driver->dev_priv_size;
- buf->dev_private = kmalloc(buf->dev_priv_size, GFP_KERNEL);
+ buf->dev_private = kzalloc(buf->dev_priv_size, GFP_KERNEL);
if (!buf->dev_private) {
/* Set count correctly so we free the proper amount. */
entry->buf_count = count;
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
- memset(buf->dev_private, 0, buf->dev_priv_size);
DRM_DEBUG("buffer %d @ %p\n", entry->buf_count, buf->address);
/* TODO setup destructor callback */
fb = dev->mode_config.funcs->fb_create(dev, file_priv, r);
- if (!fb) {
+ if (IS_ERR(fb)) {
DRM_ERROR("could not create framebuffer\n");
- ret = -EINVAL;
+ ret = PTR_ERR(fb);
goto out;
}
goto out;
}
- crtc->funcs->gamma_set(crtc, r_base, g_base, b_base, crtc->gamma_size);
+ crtc->funcs->gamma_set(crtc, r_base, g_base, b_base, 0, crtc->gamma_size);
out:
mutex_unlock(&dev->mode_config.mutex);
if (encoder_funcs->dpms)
(*encoder_funcs->dpms) (encoder,
drm_helper_choose_encoder_dpms(encoder));
-
- crtc_funcs = crtc->helper_private;
- if (crtc_funcs->dpms)
- (*crtc_funcs->dpms) (crtc,
- drm_helper_choose_crtc_dpms(crtc));
}
+
+ crtc_funcs = crtc->helper_private;
+ if (crtc_funcs->dpms)
+ (*crtc_funcs->dpms) (crtc,
+ drm_helper_choose_crtc_dpms(crtc));
}
}
/* disable the unused connectors while restoring the modesetting */
#include <linux/i2c-algo-bit.h>
#include "drmP.h"
#include "drm_edid.h"
+#include "drm_edid_modes.h"
+
+#define version_greater(edid, maj, min) \
+ (((edid)->version > (maj)) || \
+ ((edid)->version == (maj) && (edid)->revision > (min)))
#define EDID_EST_TIMINGS 16
#define EDID_STD_TIMINGS 8
/* use +hsync +vsync for detailed mode */
#define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6)
+struct detailed_mode_closure {
+ struct drm_connector *connector;
+ struct edid *edid;
+ bool preferred;
+ u32 quirks;
+ int modes;
+};
#define LEVEL_DMT 0
#define LEVEL_GTF 1
#define MODE_SIZE(m) ((m)->hdisplay * (m)->vdisplay)
#define MODE_REFRESH_DIFF(m,r) (abs((m)->vrefresh - target_refresh))
-
/**
* edid_fixup_preferred - set preferred modes based on quirk list
* @connector: has mode list to fix up
preferred_mode->type |= DRM_MODE_TYPE_PREFERRED;
}
-/*
- * Add the Autogenerated from the DMT spec.
- * This table is copied from xfree86/modes/xf86EdidModes.c.
- * But the mode with Reduced blank feature is deleted.
- */
-static struct drm_display_mode drm_dmt_modes[] = {
- /* 640x350@85Hz */
- { DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 31500, 640, 672,
- 736, 832, 0, 350, 382, 385, 445, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 640x400@85Hz */
- { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 31500, 640, 672,
- 736, 832, 0, 400, 401, 404, 445, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 720x400@85Hz */
- { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 756,
- 828, 936, 0, 400, 401, 404, 446, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 640x480@60Hz */
- { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656,
- 752, 800, 0, 480, 489, 492, 525, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 640x480@72Hz */
- { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
- 704, 832, 0, 480, 489, 492, 520, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 640x480@75Hz */
- { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656,
- 720, 840, 0, 480, 481, 484, 500, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 640x480@85Hz */
- { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 36000, 640, 696,
- 752, 832, 0, 480, 481, 484, 509, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 800x600@56Hz */
- { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824,
- 896, 1024, 0, 600, 601, 603, 625, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 800x600@60Hz */
- { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
- 968, 1056, 0, 600, 601, 605, 628, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 800x600@72Hz */
- { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856,
- 976, 1040, 0, 600, 637, 643, 666, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 800x600@75Hz */
- { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816,
- 896, 1056, 0, 600, 601, 604, 625, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 800x600@85Hz */
- { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 56250, 800, 832,
- 896, 1048, 0, 600, 601, 604, 631, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 848x480@60Hz */
- { DRM_MODE("848x480", DRM_MODE_TYPE_DRIVER, 33750, 848, 864,
- 976, 1088, 0, 480, 486, 494, 517, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1024x768@43Hz, interlace */
- { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 44900, 1024, 1032,
- 1208, 1264, 0, 768, 768, 772, 817, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC |
- DRM_MODE_FLAG_INTERLACE) },
- /* 1024x768@60Hz */
- { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
- 1184, 1344, 0, 768, 771, 777, 806, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 1024x768@70Hz */
- { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
- 1184, 1328, 0, 768, 771, 777, 806, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 1024x768@75Hz */
- { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78750, 1024, 1040,
- 1136, 1312, 0, 768, 769, 772, 800, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1024x768@85Hz */
- { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 94500, 1024, 1072,
- 1168, 1376, 0, 768, 769, 772, 808, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1152x864@75Hz */
- { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
- 1344, 1600, 0, 864, 865, 868, 900, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x768@60Hz */
- { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 79500, 1280, 1344,
- 1472, 1664, 0, 768, 771, 778, 798, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x768@75Hz */
- { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 102250, 1280, 1360,
- 1488, 1696, 0, 768, 771, 778, 805, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 1280x768@85Hz */
- { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 117500, 1280, 1360,
- 1496, 1712, 0, 768, 771, 778, 809, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x800@60Hz */
- { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 83500, 1280, 1352,
- 1480, 1680, 0, 800, 803, 809, 831, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 1280x800@75Hz */
- { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 106500, 1280, 1360,
- 1488, 1696, 0, 800, 803, 809, 838, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x800@85Hz */
- { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 122500, 1280, 1360,
- 1496, 1712, 0, 800, 803, 809, 843, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x960@60Hz */
- { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1376,
- 1488, 1800, 0, 960, 961, 964, 1000, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x960@85Hz */
- { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1344,
- 1504, 1728, 0, 960, 961, 964, 1011, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x1024@60Hz */
- { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1328,
- 1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x1024@75Hz */
- { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
- 1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x1024@85Hz */
- { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 157500, 1280, 1344,
- 1504, 1728, 0, 1024, 1025, 1028, 1072, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1360x768@60Hz */
- { DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 85500, 1360, 1424,
- 1536, 1792, 0, 768, 771, 777, 795, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1440x1050@60Hz */
- { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 121750, 1400, 1488,
- 1632, 1864, 0, 1050, 1053, 1057, 1089, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1440x1050@75Hz */
- { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 156000, 1400, 1504,
- 1648, 1896, 0, 1050, 1053, 1057, 1099, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1440x1050@85Hz */
- { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 179500, 1400, 1504,
- 1656, 1912, 0, 1050, 1053, 1057, 1105, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1440x900@60Hz */
- { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 106500, 1440, 1520,
- 1672, 1904, 0, 900, 903, 909, 934, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1440x900@75Hz */
- { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 136750, 1440, 1536,
- 1688, 1936, 0, 900, 903, 909, 942, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1440x900@85Hz */
- { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 157000, 1440, 1544,
- 1696, 1952, 0, 900, 903, 909, 948, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1600x1200@60Hz */
- { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 162000, 1600, 1664,
- 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1600x1200@65Hz */
- { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 175500, 1600, 1664,
- 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1600x1200@70Hz */
- { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 189000, 1600, 1664,
- 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1600x1200@75Hz */
- { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 202500, 1600, 1664,
- 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1600x1200@85Hz */
- { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 229500, 1600, 1664,
- 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1680x1050@60Hz */
- { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 146250, 1680, 1784,
- 1960, 2240, 0, 1050, 1053, 1059, 1089, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1680x1050@75Hz */
- { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 187000, 1680, 1800,
- 1976, 2272, 0, 1050, 1053, 1059, 1099, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1680x1050@85Hz */
- { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 214750, 1680, 1808,
- 1984, 2288, 0, 1050, 1053, 1059, 1105, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1792x1344@60Hz */
- { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 204750, 1792, 1920,
- 2120, 2448, 0, 1344, 1345, 1348, 1394, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1729x1344@75Hz */
- { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 261000, 1792, 1888,
- 2104, 2456, 0, 1344, 1345, 1348, 1417, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1853x1392@60Hz */
- { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 218250, 1856, 1952,
- 2176, 2528, 0, 1392, 1393, 1396, 1439, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1856x1392@75Hz */
- { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 288000, 1856, 1984,
- 2208, 2560, 0, 1392, 1395, 1399, 1500, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1920x1200@60Hz */
- { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 193250, 1920, 2056,
- 2256, 2592, 0, 1200, 1203, 1209, 1245, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1920x1200@75Hz */
- { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 245250, 1920, 2056,
- 2264, 2608, 0, 1200, 1203, 1209, 1255, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1920x1200@85Hz */
- { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 281250, 1920, 2064,
- 2272, 2624, 0, 1200, 1203, 1209, 1262, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1920x1440@60Hz */
- { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 234000, 1920, 2048,
- 2256, 2600, 0, 1440, 1441, 1444, 1500, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1920x1440@75Hz */
- { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2064,
- 2288, 2640, 0, 1440, 1441, 1444, 1500, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 2560x1600@60Hz */
- { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 348500, 2560, 2752,
- 3032, 3504, 0, 1600, 1603, 1609, 1658, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 2560x1600@75HZ */
- { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 443250, 2560, 2768,
- 3048, 3536, 0, 1600, 1603, 1609, 1672, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 2560x1600@85HZ */
- { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 505250, 2560, 2768,
- 3048, 3536, 0, 1600, 1603, 1609, 1682, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
-};
-static const int drm_num_dmt_modes =
- sizeof(drm_dmt_modes) / sizeof(struct drm_display_mode);
-
struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
int hsize, int vsize, int fresh)
{
typedef void detailed_cb(struct detailed_timing *timing, void *closure);
+static void
+cea_for_each_detailed_block(u8 *ext, detailed_cb *cb, void *closure)
+{
+ int i, n = 0;
+ u8 rev = ext[0x01], d = ext[0x02];
+ u8 *det_base = ext + d;
+
+ switch (rev) {
+ case 0:
+ /* can't happen */
+ return;
+ case 1:
+ /* have to infer how many blocks we have, check pixel clock */
+ for (i = 0; i < 6; i++)
+ if (det_base[18*i] || det_base[18*i+1])
+ n++;
+ break;
+ default:
+ /* explicit count */
+ n = min(ext[0x03] & 0x0f, 6);
+ break;
+ }
+
+ for (i = 0; i < n; i++)
+ cb((struct detailed_timing *)(det_base + 18 * i), closure);
+}
+
+static void
+vtb_for_each_detailed_block(u8 *ext, detailed_cb *cb, void *closure)
+{
+ unsigned int i, n = min((int)ext[0x02], 6);
+ u8 *det_base = ext + 5;
+
+ if (ext[0x01] != 1)
+ return; /* unknown version */
+
+ for (i = 0; i < n; i++)
+ cb((struct detailed_timing *)(det_base + 18 * i), closure);
+}
+
static void
drm_for_each_detailed_block(u8 *raw_edid, detailed_cb *cb, void *closure)
{
for (i = 0; i < EDID_DETAILED_TIMINGS; i++)
cb(&(edid->detailed_timings[i]), closure);
- /* XXX extension block walk */
+ for (i = 1; i <= raw_edid[0x7e]; i++) {
+ u8 *ext = raw_edid + (i * EDID_LENGTH);
+ switch (*ext) {
+ case CEA_EXT:
+ cea_for_each_detailed_block(ext, cb, closure);
+ break;
+ case VTB_EXT:
+ vtb_for_each_detailed_block(ext, cb, closure);
+ break;
+ default:
+ break;
+ }
+ }
}
static void
return mode;
}
-/*
- * Detailed mode info for the EDID "established modes" data to use.
- */
-static struct drm_display_mode edid_est_modes[] = {
- { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
- 968, 1056, 0, 600, 601, 605, 628, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@60Hz */
- { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824,
- 896, 1024, 0, 600, 601, 603, 625, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@56Hz */
- { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656,
- 720, 840, 0, 480, 481, 484, 500, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@75Hz */
- { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
- 704, 832, 0, 480, 489, 491, 520, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@72Hz */
- { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704,
- 768, 864, 0, 480, 483, 486, 525, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@67Hz */
- { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25200, 640, 656,
- 752, 800, 0, 480, 490, 492, 525, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@60Hz */
- { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738,
- 846, 900, 0, 400, 421, 423, 449, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 720x400@88Hz */
- { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 28320, 720, 738,
- 846, 900, 0, 400, 412, 414, 449, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 720x400@70Hz */
- { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
- 1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1280x1024@75Hz */
- { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78800, 1024, 1040,
- 1136, 1312, 0, 768, 769, 772, 800, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1024x768@75Hz */
- { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
- 1184, 1328, 0, 768, 771, 777, 806, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@70Hz */
- { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
- 1184, 1344, 0, 768, 771, 777, 806, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@60Hz */
- { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER,44900, 1024, 1032,
- 1208, 1264, 0, 768, 768, 776, 817, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_INTERLACE) }, /* 1024x768@43Hz */
- { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 57284, 832, 864,
- 928, 1152, 0, 624, 625, 628, 667, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 832x624@75Hz */
- { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816,
- 896, 1056, 0, 600, 601, 604, 625, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@75Hz */
- { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856,
- 976, 1040, 0, 600, 637, 643, 666, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@72Hz */
- { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
- 1344, 1600, 0, 864, 865, 868, 900, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1152x864@75Hz */
-};
-
-/**
- * add_established_modes - get est. modes from EDID and add them
- * @edid: EDID block to scan
- *
- * Each EDID block contains a bitmap of the supported "established modes" list
- * (defined above). Tease them out and add them to the global modes list.
- */
-static int add_established_modes(struct drm_connector *connector, struct edid *edid)
-{
- struct drm_device *dev = connector->dev;
- unsigned long est_bits = edid->established_timings.t1 |
- (edid->established_timings.t2 << 8) |
- ((edid->established_timings.mfg_rsvd & 0x80) << 9);
- int i, modes = 0;
-
- for (i = 0; i <= EDID_EST_TIMINGS; i++)
- if (est_bits & (1<<i)) {
- struct drm_display_mode *newmode;
- newmode = drm_mode_duplicate(dev, &edid_est_modes[i]);
- if (newmode) {
- drm_mode_probed_add(connector, newmode);
- modes++;
- }
- }
-
- return modes;
-}
-
-/**
- * add_standard_modes - get std. modes from EDID and add them
- * @edid: EDID block to scan
- *
- * Standard modes can be calculated using the CVT standard. Grab them from
- * @edid, calculate them, and add them to the list.
- */
-static int add_standard_modes(struct drm_connector *connector, struct edid *edid)
-{
- int i, modes = 0;
-
- for (i = 0; i < EDID_STD_TIMINGS; i++) {
- struct drm_display_mode *newmode;
-
- newmode = drm_mode_std(connector, edid,
- &edid->standard_timings[i],
- edid->revision);
- if (newmode) {
- drm_mode_probed_add(connector, newmode);
- modes++;
- }
- }
-
- return modes;
-}
-
static bool
mode_is_rb(struct drm_display_mode *mode)
{
return modes;
}
-static int drm_cvt_modes(struct drm_connector *connector,
- struct detailed_timing *timing)
+static void
+do_inferred_modes(struct detailed_timing *timing, void *c)
{
- int i, j, modes = 0;
- struct drm_display_mode *newmode;
- struct drm_device *dev = connector->dev;
- struct cvt_timing *cvt;
- const int rates[] = { 60, 85, 75, 60, 50 };
- const u8 empty[3] = { 0, 0, 0 };
-
- for (i = 0; i < 4; i++) {
- int uninitialized_var(width), height;
- cvt = &(timing->data.other_data.data.cvt[i]);
+ struct detailed_mode_closure *closure = c;
+ struct detailed_non_pixel *data = &timing->data.other_data;
+ int gtf = (closure->edid->features & DRM_EDID_FEATURE_DEFAULT_GTF);
- if (!memcmp(cvt->code, empty, 3))
- continue;
+ if (gtf && data->type == EDID_DETAIL_MONITOR_RANGE)
+ closure->modes += drm_gtf_modes_for_range(closure->connector,
+ closure->edid,
+ timing);
+}
- height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 4) + 1) * 2;
- switch (cvt->code[1] & 0x0c) {
- case 0x00:
- width = height * 4 / 3;
- break;
- case 0x04:
- width = height * 16 / 9;
- break;
- case 0x08:
- width = height * 16 / 10;
- break;
- case 0x0c:
- width = height * 15 / 9;
- break;
- }
+static int
+add_inferred_modes(struct drm_connector *connector, struct edid *edid)
+{
+ struct detailed_mode_closure closure = {
+ connector, edid, 0, 0, 0
+ };
- for (j = 1; j < 5; j++) {
- if (cvt->code[2] & (1 << j)) {
- newmode = drm_cvt_mode(dev, width, height,
- rates[j], j == 0,
- false, false);
- if (newmode) {
- drm_mode_probed_add(connector, newmode);
- modes++;
- }
- }
- }
- }
+ if (version_greater(edid, 1, 0))
+ drm_for_each_detailed_block((u8 *)edid, do_inferred_modes,
+ &closure);
- return modes;
+ return closure.modes;
}
-static const struct {
- short w;
- short h;
- short r;
- short rb;
-} est3_modes[] = {
- /* byte 6 */
- { 640, 350, 85, 0 },
- { 640, 400, 85, 0 },
- { 720, 400, 85, 0 },
- { 640, 480, 85, 0 },
- { 848, 480, 60, 0 },
- { 800, 600, 85, 0 },
- { 1024, 768, 85, 0 },
- { 1152, 864, 75, 0 },
- /* byte 7 */
- { 1280, 768, 60, 1 },
- { 1280, 768, 60, 0 },
- { 1280, 768, 75, 0 },
- { 1280, 768, 85, 0 },
- { 1280, 960, 60, 0 },
- { 1280, 960, 85, 0 },
- { 1280, 1024, 60, 0 },
- { 1280, 1024, 85, 0 },
- /* byte 8 */
- { 1360, 768, 60, 0 },
- { 1440, 900, 60, 1 },
- { 1440, 900, 60, 0 },
- { 1440, 900, 75, 0 },
- { 1440, 900, 85, 0 },
- { 1400, 1050, 60, 1 },
- { 1400, 1050, 60, 0 },
- { 1400, 1050, 75, 0 },
- /* byte 9 */
- { 1400, 1050, 85, 0 },
- { 1680, 1050, 60, 1 },
- { 1680, 1050, 60, 0 },
- { 1680, 1050, 75, 0 },
- { 1680, 1050, 85, 0 },
- { 1600, 1200, 60, 0 },
- { 1600, 1200, 65, 0 },
- { 1600, 1200, 70, 0 },
- /* byte 10 */
- { 1600, 1200, 75, 0 },
- { 1600, 1200, 85, 0 },
- { 1792, 1344, 60, 0 },
- { 1792, 1344, 85, 0 },
- { 1856, 1392, 60, 0 },
- { 1856, 1392, 75, 0 },
- { 1920, 1200, 60, 1 },
- { 1920, 1200, 60, 0 },
- /* byte 11 */
- { 1920, 1200, 75, 0 },
- { 1920, 1200, 85, 0 },
- { 1920, 1440, 60, 0 },
- { 1920, 1440, 75, 0 },
-};
-
static int
drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing)
{
return modes;
}
-static int add_detailed_modes(struct drm_connector *connector,
- struct detailed_timing *timing,
- struct edid *edid, u32 quirks, int preferred)
+static void
+do_established_modes(struct detailed_timing *timing, void *c)
{
- int i, modes = 0;
+ struct detailed_mode_closure *closure = c;
struct detailed_non_pixel *data = &timing->data.other_data;
- int gtf = (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF);
- struct drm_display_mode *newmode;
- struct drm_device *dev = connector->dev;
- if (timing->pixel_clock) {
- newmode = drm_mode_detailed(dev, edid, timing, quirks);
- if (!newmode)
- return 0;
+ if (data->type == EDID_DETAIL_EST_TIMINGS)
+ closure->modes += drm_est3_modes(closure->connector, timing);
+}
- if (preferred)
- newmode->type |= DRM_MODE_TYPE_PREFERRED;
+/**
+ * add_established_modes - get est. modes from EDID and add them
+ * @edid: EDID block to scan
+ *
+ * Each EDID block contains a bitmap of the supported "established modes" list
+ * (defined above). Tease them out and add them to the global modes list.
+ */
+static int
+add_established_modes(struct drm_connector *connector, struct edid *edid)
+{
+ struct drm_device *dev = connector->dev;
+ unsigned long est_bits = edid->established_timings.t1 |
+ (edid->established_timings.t2 << 8) |
+ ((edid->established_timings.mfg_rsvd & 0x80) << 9);
+ int i, modes = 0;
+ struct detailed_mode_closure closure = {
+ connector, edid, 0, 0, 0
+ };
- drm_mode_probed_add(connector, newmode);
- return 1;
+ for (i = 0; i <= EDID_EST_TIMINGS; i++) {
+ if (est_bits & (1<<i)) {
+ struct drm_display_mode *newmode;
+ newmode = drm_mode_duplicate(dev, &edid_est_modes[i]);
+ if (newmode) {
+ drm_mode_probed_add(connector, newmode);
+ modes++;
+ }
+ }
}
- /* other timing types */
- switch (data->type) {
- case EDID_DETAIL_MONITOR_RANGE:
- if (gtf)
- modes += drm_gtf_modes_for_range(connector, edid,
- timing);
- break;
- case EDID_DETAIL_STD_MODES:
- /* Six modes per detailed section */
+ if (version_greater(edid, 1, 0))
+ drm_for_each_detailed_block((u8 *)edid,
+ do_established_modes, &closure);
+
+ return modes + closure.modes;
+}
+
+static void
+do_standard_modes(struct detailed_timing *timing, void *c)
+{
+ struct detailed_mode_closure *closure = c;
+ struct detailed_non_pixel *data = &timing->data.other_data;
+ struct drm_connector *connector = closure->connector;
+ struct edid *edid = closure->edid;
+
+ if (data->type == EDID_DETAIL_STD_MODES) {
+ int i;
for (i = 0; i < 6; i++) {
struct std_timing *std;
struct drm_display_mode *newmode;
edid->revision);
if (newmode) {
drm_mode_probed_add(connector, newmode);
- modes++;
+ closure->modes++;
}
}
- break;
- case EDID_DETAIL_CVT_3BYTE:
- modes += drm_cvt_modes(connector, timing);
- break;
- case EDID_DETAIL_EST_TIMINGS:
- modes += drm_est3_modes(connector, timing);
- break;
- default:
- break;
}
-
- return modes;
}
/**
- * add_detailed_info - get detailed mode info from EDID data
- * @connector: attached connector
+ * add_standard_modes - get std. modes from EDID and add them
* @edid: EDID block to scan
- * @quirks: quirks to apply
*
- * Some of the detailed timing sections may contain mode information. Grab
- * it and add it to the list.
+ * Standard modes can be calculated using the appropriate standard (DMT,
+ * GTF or CVT. Grab them from @edid and add them to the list.
*/
-static int add_detailed_info(struct drm_connector *connector,
- struct edid *edid, u32 quirks)
+static int
+add_standard_modes(struct drm_connector *connector, struct edid *edid)
{
int i, modes = 0;
+ struct detailed_mode_closure closure = {
+ connector, edid, 0, 0, 0
+ };
+
+ for (i = 0; i < EDID_STD_TIMINGS; i++) {
+ struct drm_display_mode *newmode;
+
+ newmode = drm_mode_std(connector, edid,
+ &edid->standard_timings[i],
+ edid->revision);
+ if (newmode) {
+ drm_mode_probed_add(connector, newmode);
+ modes++;
+ }
+ }
+
+ if (version_greater(edid, 1, 0))
+ drm_for_each_detailed_block((u8 *)edid, do_standard_modes,
+ &closure);
+
+ /* XXX should also look for standard codes in VTB blocks */
+
+ return modes + closure.modes;
+}
- for (i = 0; i < EDID_DETAILED_TIMINGS; i++) {
- struct detailed_timing *timing = &edid->detailed_timings[i];
- int preferred = (i == 0);
+static int drm_cvt_modes(struct drm_connector *connector,
+ struct detailed_timing *timing)
+{
+ int i, j, modes = 0;
+ struct drm_display_mode *newmode;
+ struct drm_device *dev = connector->dev;
+ struct cvt_timing *cvt;
+ const int rates[] = { 60, 85, 75, 60, 50 };
+ const u8 empty[3] = { 0, 0, 0 };
- if (preferred && edid->version == 1 && edid->revision < 4)
- preferred = (edid->features & DRM_EDID_FEATURE_PREFERRED_TIMING);
+ for (i = 0; i < 4; i++) {
+ int uninitialized_var(width), height;
+ cvt = &(timing->data.other_data.data.cvt[i]);
- /* In 1.0, only timings are allowed */
- if (!timing->pixel_clock && edid->version == 1 &&
- edid->revision == 0)
+ if (!memcmp(cvt->code, empty, 3))
continue;
- modes += add_detailed_modes(connector, timing, edid, quirks,
- preferred);
+ height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 4) + 1) * 2;
+ switch (cvt->code[1] & 0x0c) {
+ case 0x00:
+ width = height * 4 / 3;
+ break;
+ case 0x04:
+ width = height * 16 / 9;
+ break;
+ case 0x08:
+ width = height * 16 / 10;
+ break;
+ case 0x0c:
+ width = height * 15 / 9;
+ break;
+ }
+
+ for (j = 1; j < 5; j++) {
+ if (cvt->code[2] & (1 << j)) {
+ newmode = drm_cvt_mode(dev, width, height,
+ rates[j], j == 0,
+ false, false);
+ if (newmode) {
+ drm_mode_probed_add(connector, newmode);
+ modes++;
+ }
+ }
+ }
}
return modes;
}
-/**
- * add_detailed_mode_eedid - get detailed mode info from addtional timing
- * EDID block
- * @connector: attached connector
- * @edid: EDID block to scan(It is only to get addtional timing EDID block)
- * @quirks: quirks to apply
- *
- * Some of the detailed timing sections may contain mode information. Grab
- * it and add it to the list.
- */
-static int add_detailed_info_eedid(struct drm_connector *connector,
- struct edid *edid, u32 quirks)
+static void
+do_cvt_mode(struct detailed_timing *timing, void *c)
{
- int i, modes = 0;
- char *edid_ext = NULL;
- struct detailed_timing *timing;
- int start_offset, end_offset;
+ struct detailed_mode_closure *closure = c;
+ struct detailed_non_pixel *data = &timing->data.other_data;
- if (edid->version == 1 && edid->revision < 3)
- return 0;
- if (!edid->extensions)
- return 0;
+ if (data->type == EDID_DETAIL_CVT_3BYTE)
+ closure->modes += drm_cvt_modes(closure->connector, timing);
+}
- /* Find CEA extension */
- for (i = 0; i < edid->extensions; i++) {
- edid_ext = (char *)edid + EDID_LENGTH * (i + 1);
- if (edid_ext[0] == 0x02)
- break;
- }
+static int
+add_cvt_modes(struct drm_connector *connector, struct edid *edid)
+{
+ struct detailed_mode_closure closure = {
+ connector, edid, 0, 0, 0
+ };
- if (i == edid->extensions)
- return 0;
+ if (version_greater(edid, 1, 2))
+ drm_for_each_detailed_block((u8 *)edid, do_cvt_mode, &closure);
- /* Get the start offset of detailed timing block */
- start_offset = edid_ext[2];
- if (start_offset == 0) {
- /* If the start_offset is zero, it means that neither detailed
- * info nor data block exist. In such case it is also
- * unnecessary to parse the detailed timing info.
- */
- return 0;
- }
+ /* XXX should also look for CVT codes in VTB blocks */
- end_offset = EDID_LENGTH;
- end_offset -= sizeof(struct detailed_timing);
- for (i = start_offset; i < end_offset;
- i += sizeof(struct detailed_timing)) {
- timing = (struct detailed_timing *)(edid_ext + i);
- modes += add_detailed_modes(connector, timing, edid, quirks, 0);
+ return closure.modes;
+}
+
+static void
+do_detailed_mode(struct detailed_timing *timing, void *c)
+{
+ struct detailed_mode_closure *closure = c;
+ struct drm_display_mode *newmode;
+
+ if (timing->pixel_clock) {
+ newmode = drm_mode_detailed(closure->connector->dev,
+ closure->edid, timing,
+ closure->quirks);
+ if (!newmode)
+ return;
+
+ if (closure->preferred)
+ newmode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_probed_add(closure->connector, newmode);
+ closure->modes++;
+ closure->preferred = 0;
}
+}
- return modes;
+/*
+ * add_detailed_modes - Add modes from detailed timings
+ * @connector: attached connector
+ * @edid: EDID block to scan
+ * @quirks: quirks to apply
+ */
+static int
+add_detailed_modes(struct drm_connector *connector, struct edid *edid,
+ u32 quirks)
+{
+ struct detailed_mode_closure closure = {
+ connector,
+ edid,
+ 1,
+ quirks,
+ 0
+ };
+
+ if (closure.preferred && !version_greater(edid, 1, 3))
+ closure.preferred =
+ (edid->features & DRM_EDID_FEATURE_PREFERRED_TIMING);
+
+ drm_for_each_detailed_block((u8 *)edid, do_detailed_mode, &closure);
+
+ return closure.modes;
}
#define HDMI_IDENTIFIER 0x000C03
* - established timing codes
* - modes inferred from GTF or CVT range information
*
- * We don't quite implement this yet, but we're close.
+ * We get this pretty much right.
*
* XXX order for additional mode types in extension blocks?
*/
- num_modes += add_detailed_info(connector, edid, quirks);
- num_modes += add_detailed_info_eedid(connector, edid, quirks);
+ num_modes += add_detailed_modes(connector, edid, quirks);
+ num_modes += add_cvt_modes(connector, edid);
num_modes += add_standard_modes(connector, edid);
num_modes += add_established_modes(connector, edid);
+ num_modes += add_inferred_modes(connector, edid);
if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
edid_fixup_preferred(connector, quirks);
- connector->display_info.serration_vsync = (edid->input & DRM_EDID_INPUT_SERRATION_VSYNC) ? 1 : 0;
- connector->display_info.sync_on_green = (edid->input & DRM_EDID_INPUT_SYNC_ON_GREEN) ? 1 : 0;
- connector->display_info.composite_sync = (edid->input & DRM_EDID_INPUT_COMPOSITE_SYNC) ? 1 : 0;
- connector->display_info.separate_syncs = (edid->input & DRM_EDID_INPUT_SEPARATE_SYNCS) ? 1 : 0;
- connector->display_info.blank_to_black = (edid->input & DRM_EDID_INPUT_BLANK_TO_BLACK) ? 1 : 0;
- connector->display_info.video_level = (edid->input & DRM_EDID_INPUT_VIDEO_LEVEL) >> 5;
- connector->display_info.digital = (edid->input & DRM_EDID_INPUT_DIGITAL) ? 1 : 0;
connector->display_info.width_mm = edid->width_cm * 10;
connector->display_info.height_mm = edid->height_cm * 10;
- connector->display_info.gamma = edid->gamma;
- connector->display_info.gtf_supported = (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF) ? 1 : 0;
- connector->display_info.standard_color = (edid->features & DRM_EDID_FEATURE_STANDARD_COLOR) ? 1 : 0;
- connector->display_info.display_type = (edid->features & DRM_EDID_FEATURE_DISPLAY_TYPE) >> 3;
- connector->display_info.active_off_supported = (edid->features & DRM_EDID_FEATURE_PM_ACTIVE_OFF) ? 1 : 0;
- connector->display_info.suspend_supported = (edid->features & DRM_EDID_FEATURE_PM_SUSPEND) ? 1 : 0;
- connector->display_info.standby_supported = (edid->features & DRM_EDID_FEATURE_PM_STANDBY) ? 1 : 0;
- connector->display_info.gamma = edid->gamma;
return num_modes;
}
--- /dev/null
+/*
+ * Copyright (c) 2007-2008 Intel Corporation
+ * Jesse Barnes <jesse.barnes@intel.com>
+ * Copyright 2010 Red Hat, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include "drmP.h"
+#include "drm_edid.h"
+
+/*
+ * Autogenerated from the DMT spec.
+ * This table is copied from xfree86/modes/xf86EdidModes.c.
+ * But the mode with Reduced blank feature is deleted.
+ */
+static struct drm_display_mode drm_dmt_modes[] = {
+ /* 640x350@85Hz */
+ { DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 31500, 640, 672,
+ 736, 832, 0, 350, 382, 385, 445, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 640x400@85Hz */
+ { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 31500, 640, 672,
+ 736, 832, 0, 400, 401, 404, 445, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 720x400@85Hz */
+ { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 756,
+ 828, 936, 0, 400, 401, 404, 446, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 640x480@60Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656,
+ 752, 800, 0, 480, 489, 492, 525, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 640x480@72Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
+ 704, 832, 0, 480, 489, 492, 520, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 640x480@75Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656,
+ 720, 840, 0, 480, 481, 484, 500, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 640x480@85Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 36000, 640, 696,
+ 752, 832, 0, 480, 481, 484, 509, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 800x600@56Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824,
+ 896, 1024, 0, 600, 601, 603, 625, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 800x600@60Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
+ 968, 1056, 0, 600, 601, 605, 628, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 800x600@72Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856,
+ 976, 1040, 0, 600, 637, 643, 666, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 800x600@75Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816,
+ 896, 1056, 0, 600, 601, 604, 625, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 800x600@85Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 56250, 800, 832,
+ 896, 1048, 0, 600, 601, 604, 631, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 848x480@60Hz */
+ { DRM_MODE("848x480", DRM_MODE_TYPE_DRIVER, 33750, 848, 864,
+ 976, 1088, 0, 480, 486, 494, 517, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1024x768@43Hz, interlace */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 44900, 1024, 1032,
+ 1208, 1264, 0, 768, 768, 772, 817, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC |
+ DRM_MODE_FLAG_INTERLACE) },
+ /* 1024x768@60Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
+ 1184, 1344, 0, 768, 771, 777, 806, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 1024x768@70Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
+ 1184, 1328, 0, 768, 771, 777, 806, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 1024x768@75Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78750, 1024, 1040,
+ 1136, 1312, 0, 768, 769, 772, 800, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1024x768@85Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 94500, 1024, 1072,
+ 1168, 1376, 0, 768, 769, 772, 808, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1152x864@75Hz */
+ { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
+ 1344, 1600, 0, 864, 865, 868, 900, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x768@60Hz */
+ { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 79500, 1280, 1344,
+ 1472, 1664, 0, 768, 771, 778, 798, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x768@75Hz */
+ { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 102250, 1280, 1360,
+ 1488, 1696, 0, 768, 771, 778, 805, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 1280x768@85Hz */
+ { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 117500, 1280, 1360,
+ 1496, 1712, 0, 768, 771, 778, 809, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x800@60Hz */
+ { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 83500, 1280, 1352,
+ 1480, 1680, 0, 800, 803, 809, 831, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 1280x800@75Hz */
+ { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 106500, 1280, 1360,
+ 1488, 1696, 0, 800, 803, 809, 838, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x800@85Hz */
+ { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 122500, 1280, 1360,
+ 1496, 1712, 0, 800, 803, 809, 843, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x960@60Hz */
+ { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1376,
+ 1488, 1800, 0, 960, 961, 964, 1000, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x960@85Hz */
+ { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1344,
+ 1504, 1728, 0, 960, 961, 964, 1011, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x1024@60Hz */
+ { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1328,
+ 1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x1024@75Hz */
+ { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
+ 1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x1024@85Hz */
+ { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 157500, 1280, 1344,
+ 1504, 1728, 0, 1024, 1025, 1028, 1072, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1360x768@60Hz */
+ { DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 85500, 1360, 1424,
+ 1536, 1792, 0, 768, 771, 777, 795, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1440x1050@60Hz */
+ { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 121750, 1400, 1488,
+ 1632, 1864, 0, 1050, 1053, 1057, 1089, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1440x1050@75Hz */
+ { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 156000, 1400, 1504,
+ 1648, 1896, 0, 1050, 1053, 1057, 1099, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1440x1050@85Hz */
+ { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 179500, 1400, 1504,
+ 1656, 1912, 0, 1050, 1053, 1057, 1105, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1440x900@60Hz */
+ { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 106500, 1440, 1520,
+ 1672, 1904, 0, 900, 903, 909, 934, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1440x900@75Hz */
+ { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 136750, 1440, 1536,
+ 1688, 1936, 0, 900, 903, 909, 942, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1440x900@85Hz */
+ { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 157000, 1440, 1544,
+ 1696, 1952, 0, 900, 903, 909, 948, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1600x1200@60Hz */
+ { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 162000, 1600, 1664,
+ 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1600x1200@65Hz */
+ { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 175500, 1600, 1664,
+ 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1600x1200@70Hz */
+ { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 189000, 1600, 1664,
+ 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1600x1200@75Hz */
+ { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 202500, 1600, 1664,
+ 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1600x1200@85Hz */
+ { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 229500, 1600, 1664,
+ 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1680x1050@60Hz */
+ { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 146250, 1680, 1784,
+ 1960, 2240, 0, 1050, 1053, 1059, 1089, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1680x1050@75Hz */
+ { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 187000, 1680, 1800,
+ 1976, 2272, 0, 1050, 1053, 1059, 1099, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1680x1050@85Hz */
+ { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 214750, 1680, 1808,
+ 1984, 2288, 0, 1050, 1053, 1059, 1105, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1792x1344@60Hz */
+ { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 204750, 1792, 1920,
+ 2120, 2448, 0, 1344, 1345, 1348, 1394, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1729x1344@75Hz */
+ { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 261000, 1792, 1888,
+ 2104, 2456, 0, 1344, 1345, 1348, 1417, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1853x1392@60Hz */
+ { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 218250, 1856, 1952,
+ 2176, 2528, 0, 1392, 1393, 1396, 1439, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1856x1392@75Hz */
+ { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 288000, 1856, 1984,
+ 2208, 2560, 0, 1392, 1395, 1399, 1500, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1920x1200@60Hz */
+ { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 193250, 1920, 2056,
+ 2256, 2592, 0, 1200, 1203, 1209, 1245, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1920x1200@75Hz */
+ { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 245250, 1920, 2056,
+ 2264, 2608, 0, 1200, 1203, 1209, 1255, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1920x1200@85Hz */
+ { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 281250, 1920, 2064,
+ 2272, 2624, 0, 1200, 1203, 1209, 1262, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1920x1440@60Hz */
+ { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 234000, 1920, 2048,
+ 2256, 2600, 0, 1440, 1441, 1444, 1500, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1920x1440@75Hz */
+ { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2064,
+ 2288, 2640, 0, 1440, 1441, 1444, 1500, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 2560x1600@60Hz */
+ { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 348500, 2560, 2752,
+ 3032, 3504, 0, 1600, 1603, 1609, 1658, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 2560x1600@75HZ */
+ { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 443250, 2560, 2768,
+ 3048, 3536, 0, 1600, 1603, 1609, 1672, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 2560x1600@85HZ */
+ { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 505250, 2560, 2768,
+ 3048, 3536, 0, 1600, 1603, 1609, 1682, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+};
+static const int drm_num_dmt_modes =
+ sizeof(drm_dmt_modes) / sizeof(struct drm_display_mode);
+
+static struct drm_display_mode edid_est_modes[] = {
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
+ 968, 1056, 0, 600, 601, 605, 628, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@60Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824,
+ 896, 1024, 0, 600, 601, 603, 625, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@56Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656,
+ 720, 840, 0, 480, 481, 484, 500, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@75Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
+ 704, 832, 0, 480, 489, 491, 520, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@72Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704,
+ 768, 864, 0, 480, 483, 486, 525, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@67Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25200, 640, 656,
+ 752, 800, 0, 480, 490, 492, 525, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@60Hz */
+ { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738,
+ 846, 900, 0, 400, 421, 423, 449, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 720x400@88Hz */
+ { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 28320, 720, 738,
+ 846, 900, 0, 400, 412, 414, 449, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 720x400@70Hz */
+ { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
+ 1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1280x1024@75Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78800, 1024, 1040,
+ 1136, 1312, 0, 768, 769, 772, 800, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1024x768@75Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
+ 1184, 1328, 0, 768, 771, 777, 806, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@70Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
+ 1184, 1344, 0, 768, 771, 777, 806, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@60Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER,44900, 1024, 1032,
+ 1208, 1264, 0, 768, 768, 776, 817, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_INTERLACE) }, /* 1024x768@43Hz */
+ { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 57284, 832, 864,
+ 928, 1152, 0, 624, 625, 628, 667, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 832x624@75Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816,
+ 896, 1056, 0, 600, 601, 604, 625, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@75Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856,
+ 976, 1040, 0, 600, 637, 643, 666, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@72Hz */
+ { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
+ 1344, 1600, 0, 864, 865, 868, 900, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1152x864@75Hz */
+};
+
+static const struct {
+ short w;
+ short h;
+ short r;
+ short rb;
+} est3_modes[] = {
+ /* byte 6 */
+ { 640, 350, 85, 0 },
+ { 640, 400, 85, 0 },
+ { 720, 400, 85, 0 },
+ { 640, 480, 85, 0 },
+ { 848, 480, 60, 0 },
+ { 800, 600, 85, 0 },
+ { 1024, 768, 85, 0 },
+ { 1152, 864, 75, 0 },
+ /* byte 7 */
+ { 1280, 768, 60, 1 },
+ { 1280, 768, 60, 0 },
+ { 1280, 768, 75, 0 },
+ { 1280, 768, 85, 0 },
+ { 1280, 960, 60, 0 },
+ { 1280, 960, 85, 0 },
+ { 1280, 1024, 60, 0 },
+ { 1280, 1024, 85, 0 },
+ /* byte 8 */
+ { 1360, 768, 60, 0 },
+ { 1440, 900, 60, 1 },
+ { 1440, 900, 60, 0 },
+ { 1440, 900, 75, 0 },
+ { 1440, 900, 85, 0 },
+ { 1400, 1050, 60, 1 },
+ { 1400, 1050, 60, 0 },
+ { 1400, 1050, 75, 0 },
+ /* byte 9 */
+ { 1400, 1050, 85, 0 },
+ { 1680, 1050, 60, 1 },
+ { 1680, 1050, 60, 0 },
+ { 1680, 1050, 75, 0 },
+ { 1680, 1050, 85, 0 },
+ { 1600, 1200, 60, 0 },
+ { 1600, 1200, 65, 0 },
+ { 1600, 1200, 70, 0 },
+ /* byte 10 */
+ { 1600, 1200, 75, 0 },
+ { 1600, 1200, 85, 0 },
+ { 1792, 1344, 60, 0 },
+ { 1792, 1344, 85, 0 },
+ { 1856, 1392, 60, 0 },
+ { 1856, 1392, 75, 0 },
+ { 1920, 1200, 60, 1 },
+ { 1920, 1200, 60, 0 },
+ /* byte 11 */
+ { 1920, 1200, 75, 0 },
+ { 1920, 1200, 85, 0 },
+ { 1920, 1440, 60, 0 },
+ { 1920, 1440, 75, 0 },
+};
+static const int num_est3_modes = sizeof(est3_modes) / sizeof(est3_modes[0]);
retcode = drm_open_helper(inode, filp, dev);
if (!retcode) {
atomic_inc(&dev->counts[_DRM_STAT_OPENS]);
- spin_lock(&dev->count_lock);
- if (!dev->open_count++) {
- spin_unlock(&dev->count_lock);
+ if (!dev->open_count++)
retcode = drm_setup(dev);
- goto out;
- }
- spin_unlock(&dev->count_lock);
}
-out:
if (!retcode) {
mutex_lock(&dev->struct_mutex);
if (minor->type == DRM_MINOR_LEGACY) {
*/
atomic_inc(&dev->counts[_DRM_STAT_CLOSES]);
- spin_lock(&dev->count_lock);
if (!--dev->open_count) {
if (atomic_read(&dev->ioctl_count)) {
DRM_ERROR("Device busy: %d\n",
atomic_read(&dev->ioctl_count));
retcode = -EBUSY;
- goto out;
- }
- retcode = drm_lastclose(dev);
+ } else
+ retcode = drm_lastclose(dev);
}
-out:
- spin_unlock(&dev->count_lock);
mutex_unlock(&drm_global_mutex);
return retcode;
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
- return -EBADF;
+ return -ENOENT;
again:
if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) {
if (sv->drm_di_minor >= 1) {
/*
* Version 1.1 includes tying of DRM to specific device
+ * Version 1.4 has proper PCI domain support
*/
retcode = drm_set_busid(dev, file_priv);
if (retcode)
priv->hmargin = 50;
priv->vmargin = 50;
priv->last_dpms = -1;
+ priv->chip_version = ch7006_read(client, CH7006_VERSION_ID);
if (ch7006_tv_norm) {
for (i = 0; i < NUM_TV_NORMS; i++) {
}
} else {
- *power |= bitfs(CH7006_POWER_LEVEL, FULL_POWER_OFF);
+ if (priv->chip_version >= 0x20)
+ *power |= bitfs(CH7006_POWER_LEVEL, FULL_POWER_OFF);
+ else
+ *power |= bitfs(CH7006_POWER_LEVEL, POWER_OFF);
}
}
int flicker;
int scale;
+ int chip_version;
int last_dpms;
};
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
- return -EBADF;
+ return -ENOENT;
obj_priv = to_intel_bo(obj);
/* Bounds check source.
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
- return -EBADF;
+ return -ENOENT;
obj_priv = to_intel_bo(obj);
/* Bounds check destination.
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
- return -EBADF;
+ return -ENOENT;
obj_priv = to_intel_bo(obj);
mutex_lock(&dev->struct_mutex);
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL) {
mutex_unlock(&dev->struct_mutex);
- return -EBADF;
+ return -ENOENT;
}
#if WATCH_BUF
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
- return -EBADF;
+ return -ENOENT;
offset = args->offset;
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
- return -EBADF;
+ return -ENOENT;
mutex_lock(&dev->struct_mutex);
reloc->target_handle);
if (target_obj == NULL) {
i915_gem_object_unpin(obj);
- return -EBADF;
+ return -ENOENT;
}
target_obj_priv = to_intel_bo(target_obj);
exec_list[i].handle, i);
/* prevent error path from reading uninitialized data */
args->buffer_count = i + 1;
- ret = -EBADF;
+ ret = -ENOENT;
goto err;
}
object_list[i]);
/* prevent error path from reading uninitialized data */
args->buffer_count = i + 1;
- ret = -EBADF;
+ ret = -EINVAL;
goto err;
}
obj_priv->in_execbuffer = true;
DRM_ERROR("Bad handle in i915_gem_pin_ioctl(): %d\n",
args->handle);
mutex_unlock(&dev->struct_mutex);
- return -EBADF;
+ return -ENOENT;
}
obj_priv = to_intel_bo(obj);
DRM_ERROR("Bad handle in i915_gem_unpin_ioctl(): %d\n",
args->handle);
mutex_unlock(&dev->struct_mutex);
- return -EBADF;
+ return -ENOENT;
}
obj_priv = to_intel_bo(obj);
if (obj == NULL) {
DRM_ERROR("Bad handle in i915_gem_busy_ioctl(): %d\n",
args->handle);
- return -EBADF;
+ return -ENOENT;
}
mutex_lock(&dev->struct_mutex);
if (obj == NULL) {
DRM_ERROR("Bad handle in i915_gem_madvise_ioctl(): %d\n",
args->handle);
- return -EBADF;
+ return -ENOENT;
}
mutex_lock(&dev->struct_mutex);
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
- return -EINVAL;
+ return -ENOENT;
obj_priv = to_intel_bo(obj);
if (!i915_tiling_ok(dev, args->stride, obj->size, args->tiling_mode)) {
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
- return -EINVAL;
+ return -ENOENT;
obj_priv = to_intel_bo(obj);
mutex_lock(&dev->struct_mutex);
err_out:
iounmap(opregion->header);
opregion->header = NULL;
+ acpi_video_register();
return err;
}
}
static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
- u16 *blue, uint32_t size)
+ u16 *blue, uint32_t start, uint32_t size)
{
+ int end = (start + size > 256) ? 256 : start + size, i;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int i;
-
- if (size != 256)
- return;
- for (i = 0; i < 256; i++) {
+ for (i = start; i < end; i++) {
intel_crtc->lut_r[i] = red[i] >> 8;
intel_crtc->lut_g[i] = green[i] >> 8;
intel_crtc->lut_b[i] = blue[i] >> 8;
obj = drm_gem_object_lookup(dev, filp, mode_cmd->handle);
if (!obj)
- return NULL;
+ return ERR_PTR(-ENOENT);
intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
if (!intel_fb)
- return NULL;
+ return ERR_PTR(-ENOMEM);
ret = intel_framebuffer_init(dev, intel_fb,
mode_cmd, obj);
if (ret) {
drm_gem_object_unreference_unlocked(obj);
kfree(intel_fb);
- return NULL;
+ return ERR_PTR(ret);
}
return &intel_fb->base;
info->par = ifbdev;
- intel_framebuffer_init(dev, &ifbdev->ifb, &mode_cmd, fbo);
+ ret = intel_framebuffer_init(dev, &ifbdev->ifb, &mode_cmd, fbo);
+ if (ret)
+ goto out_unpin;
fb = &ifbdev->ifb.base;
strcpy(info->fix.id, "inteldrmfb");
- info->flags = FBINFO_DEFAULT;
+ info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT;
info->fbops = &intelfb_ops;
/* setup aperture base/size for vesafb takeover */
info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset;
info->fix.smem_len = size;
- info->flags = FBINFO_DEFAULT;
-
info->screen_base = ioremap_wc(dev->agp->base + obj_priv->gtt_offset,
size);
if (!info->screen_base) {
nouveau_dp.o \
nv04_timer.o \
nv04_mc.o nv40_mc.o nv50_mc.o \
- nv04_fb.o nv10_fb.o nv30_fb.o nv40_fb.o nv50_fb.o \
- nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o \
+ nv04_fb.o nv10_fb.o nv30_fb.o nv40_fb.o nv50_fb.o nvc0_fb.o \
+ nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o nvc0_fifo.o \
nv04_graph.o nv10_graph.o nv20_graph.o \
- nv40_graph.o nv50_graph.o \
+ nv40_graph.o nv50_graph.o nvc0_graph.o \
nv40_grctx.o nv50_grctx.o \
- nv04_instmem.o nv50_instmem.o \
+ nv04_instmem.o nv50_instmem.o nvc0_instmem.o \
nv50_crtc.o nv50_dac.o nv50_sor.o \
nv50_cursor.o nv50_display.o nv50_fbcon.o \
nv04_dac.o nv04_dfp.o nv04_tv.o nv17_tv.o nv17_tv_modes.o \
return 3;
}
+static int
+init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
+{
+ /*
+ * INIT_LTIME opcode: 0x57 ('V')
+ *
+ * offset (8 bit): opcode
+ * offset + 1 (16 bit): time
+ *
+ * Sleep for "time" miliseconds.
+ */
+
+ unsigned time = ROM16(bios->data[offset + 1]);
+
+ if (!iexec->execute)
+ return 3;
+
+ BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X miliseconds\n",
+ offset, time);
+
+ msleep(time);
+
+ return 3;
+}
+
static int
init_zm_reg_sequence(struct nvbios *bios, uint16_t offset,
struct init_exec *iexec)
return 3;
}
+static int
+init_i2c_if(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
+{
+ /*
+ * INIT_I2C_IF opcode: 0x5E ('^')
+ *
+ * offset (8 bit): opcode
+ * offset + 1 (8 bit): DCB I2C table entry index
+ * offset + 2 (8 bit): I2C slave address
+ * offset + 3 (8 bit): I2C register
+ * offset + 4 (8 bit): mask
+ * offset + 5 (8 bit): data
+ *
+ * Read the register given by "I2C register" on the device addressed
+ * by "I2C slave address" on the I2C bus given by "DCB I2C table
+ * entry index". Compare the result AND "mask" to "data".
+ * If they're not equal, skip subsequent opcodes until condition is
+ * inverted (INIT_NOT), or we hit INIT_RESUME
+ */
+
+ uint8_t i2c_index = bios->data[offset + 1];
+ uint8_t i2c_address = bios->data[offset + 2] >> 1;
+ uint8_t reg = bios->data[offset + 3];
+ uint8_t mask = bios->data[offset + 4];
+ uint8_t data = bios->data[offset + 5];
+ struct nouveau_i2c_chan *chan;
+ union i2c_smbus_data val;
+ int ret;
+
+ /* no execute check by design */
+
+ BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X\n",
+ offset, i2c_index, i2c_address);
+
+ chan = init_i2c_device_find(bios->dev, i2c_index);
+ if (!chan)
+ return -ENODEV;
+
+ ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
+ I2C_SMBUS_READ, reg,
+ I2C_SMBUS_BYTE_DATA, &val);
+ if (ret < 0) {
+ BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: [no device], "
+ "Mask: 0x%02X, Data: 0x%02X\n",
+ offset, reg, mask, data);
+ iexec->execute = 0;
+ return 6;
+ }
+
+ BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: 0x%02X, "
+ "Mask: 0x%02X, Data: 0x%02X\n",
+ offset, reg, val.byte, mask, data);
+
+ iexec->execute = ((val.byte & mask) == data);
+
+ return 6;
+}
+
static int
init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
{
uint32_t val = 0;
if (off < pci_resource_len(dev->pdev, 1)) {
- uint32_t __iomem *p = io_mapping_map_atomic_wc(fb, off, KM_USER0);
+ uint32_t __iomem *p =
+ io_mapping_map_atomic_wc(fb, off & PAGE_MASK, KM_USER0);
- val = ioread32(p);
+ val = ioread32(p + (off & ~PAGE_MASK));
io_mapping_unmap_atomic(p, KM_USER0);
}
uint32_t off, uint32_t val)
{
if (off < pci_resource_len(dev->pdev, 1)) {
- uint32_t __iomem *p = io_mapping_map_atomic_wc(fb, off, KM_USER0);
+ uint32_t __iomem *p =
+ io_mapping_map_atomic_wc(fb, off & PAGE_MASK, KM_USER0);
- iowrite32(val, p);
+ iowrite32(val, p + (off & ~PAGE_MASK));
wmb();
io_mapping_unmap_atomic(p, KM_USER0);
NV04_PFB_BOOT_0_RAM_AMOUNT,
NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
- } else if (peek_fb(dev, fb, 0) == patt) {
+ } else if (peek_fb(dev, fb, 0) != patt) {
if (read_back_fb(dev, fb, 0x800000, patt))
bios_md32(bios, NV04_PFB_BOOT_0,
NV04_PFB_BOOT_0_RAM_AMOUNT,
/* no iexec->execute check by design */
uint32_t straps = bios_rd32(bios, NV_PEXTDEV_BOOT_0);
- uint8_t cr3c = ((straps << 2) & 0xf0) | (straps & (1 << 6));
+ uint8_t cr3c = ((straps << 2) & 0xf0) | (straps & 0x40) >> 6;
if (bios->major_version > 2)
return 0;
const uint32_t nv50_gpio_ctl[2] = { 0xe100, 0xe28c };
int i;
- if (dev_priv->card_type != NV_50) {
+ if (dev_priv->card_type < NV_50) {
NV_ERROR(bios->dev, "INIT_GPIO on unsupported chipset\n");
return 1;
}
return len;
}
+static int
+init_i2c_long_if(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
+{
+ /*
+ * INIT_I2C_LONG_IF opcode: 0x9A ('')
+ *
+ * offset (8 bit): opcode
+ * offset + 1 (8 bit): DCB I2C table entry index
+ * offset + 2 (8 bit): I2C slave address
+ * offset + 3 (16 bit): I2C register
+ * offset + 5 (8 bit): mask
+ * offset + 6 (8 bit): data
+ *
+ * Read the register given by "I2C register" on the device addressed
+ * by "I2C slave address" on the I2C bus given by "DCB I2C table
+ * entry index". Compare the result AND "mask" to "data".
+ * If they're not equal, skip subsequent opcodes until condition is
+ * inverted (INIT_NOT), or we hit INIT_RESUME
+ */
+
+ uint8_t i2c_index = bios->data[offset + 1];
+ uint8_t i2c_address = bios->data[offset + 2] >> 1;
+ uint8_t reglo = bios->data[offset + 3];
+ uint8_t reghi = bios->data[offset + 4];
+ uint8_t mask = bios->data[offset + 5];
+ uint8_t data = bios->data[offset + 6];
+ struct nouveau_i2c_chan *chan;
+ uint8_t buf0[2] = { reghi, reglo };
+ uint8_t buf1[1];
+ struct i2c_msg msg[2] = {
+ { i2c_address, 0, 1, buf0 },
+ { i2c_address, I2C_M_RD, 1, buf1 },
+ };
+ int ret;
+
+ /* no execute check by design */
+
+ BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X\n",
+ offset, i2c_index, i2c_address);
+
+ chan = init_i2c_device_find(bios->dev, i2c_index);
+ if (!chan)
+ return -ENODEV;
+
+
+ ret = i2c_transfer(&chan->adapter, msg, 2);
+ if (ret < 0) {
+ BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X:0x%02X, Value: [no device], "
+ "Mask: 0x%02X, Data: 0x%02X\n",
+ offset, reghi, reglo, mask, data);
+ iexec->execute = 0;
+ return 7;
+ }
+
+ BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X:0x%02X, Value: 0x%02X, "
+ "Mask: 0x%02X, Data: 0x%02X\n",
+ offset, reghi, reglo, buf1[0], mask, data);
+
+ iexec->execute = ((buf1[0] & mask) == data);
+
+ return 7;
+}
+
static struct init_tbl_entry itbl_entry[] = {
/* command name , id , length , offset , mult , command handler */
/* INIT_PROG (0x31, 15, 10, 4) removed due to no example of use */
{ "INIT_ZM_CR" , 0x53, init_zm_cr },
{ "INIT_ZM_CR_GROUP" , 0x54, init_zm_cr_group },
{ "INIT_CONDITION_TIME" , 0x56, init_condition_time },
+ { "INIT_LTIME" , 0x57, init_ltime },
{ "INIT_ZM_REG_SEQUENCE" , 0x58, init_zm_reg_sequence },
/* INIT_INDIRECT_REG (0x5A, 7, 0, 0) removed due to no example of use */
{ "INIT_SUB_DIRECT" , 0x5B, init_sub_direct },
+ { "INIT_I2C_IF" , 0x5E, init_i2c_if },
{ "INIT_COPY_NV_REG" , 0x5F, init_copy_nv_reg },
{ "INIT_ZM_INDEX_IO" , 0x62, init_zm_index_io },
{ "INIT_COMPUTE_MEM" , 0x63, init_compute_mem },
{ "INIT_97" , 0x97, init_97 },
{ "INIT_AUXCH" , 0x98, init_auxch },
{ "INIT_ZM_AUXCH" , 0x99, init_zm_auxch },
+ { "INIT_I2C_LONG_IF" , 0x9A, init_i2c_long_if },
{ NULL , 0 , NULL }
};
bios->display.script_table_ptr,
table[2], table[3], table[0] >= 0x21);
if (!otable) {
- NV_ERROR(dev, "Couldn't find matching output script table\n");
+ NV_DEBUG_KMS(dev, "failed to match any output table\n");
return 1;
}
if (script)
script = clkcmptable(bios, script, pxclk);
if (!script) {
- NV_ERROR(dev, "clock script 0 not found\n");
+ NV_DEBUG_KMS(dev, "clock script 0 not found\n");
return 1;
}
pll_lim->min_p = record[12];
pll_lim->max_p = record[13];
/* where did this go to?? */
- if (limit_match == 0x00614100 || limit_match == 0x00614900)
+ if ((entry[0] & 0xf0) == 0x80)
pll_lim->refclk = 27000;
else
pll_lim->refclk = 100000;
entry->i2c_index = i2c;
entry->heads = heads;
entry->location = DCB_LOC_ON_CHIP;
- /* "or" mostly unused in early gen crt modesetting, 0 is fine */
+ entry->or = 1;
}
static void fabricate_dvi_i_output(struct dcb_table *dcb, bool twoHeads)
}
break;
case OUTPUT_TMDS:
- entry->tmdsconf.sor.link = (conf & 0x00000030) >> 4;
+ if (dcb->version >= 0x40)
+ entry->tmdsconf.sor.link = (conf & 0x00000030) >> 4;
+ else if (dcb->version >= 0x30)
+ entry->tmdsconf.slave_addr = (conf & 0x00000700) >> 8;
+ else if (dcb->version >= 0x22)
+ entry->tmdsconf.slave_addr = (conf & 0x00000070) >> 4;
+
break;
case 0xe:
/* weird g80 mobile type that "nv" treats as a terminator */
dcb->i2c_table = &bios->data[i2ctabptr];
if (dcb->version >= 0x30)
dcb->i2c_default_indices = dcb->i2c_table[4];
+
+ /*
+ * Parse the "management" I2C bus, used for hardware
+ * monitoring and some external TMDS transmitters.
+ */
+ if (dcb->version >= 0x22) {
+ int idx = (dcb->version >= 0x40 ?
+ dcb->i2c_default_indices & 0xf :
+ 2);
+
+ read_dcb_i2c_entry(dev, dcb->version, dcb->i2c_table,
+ idx, &dcb->i2c[idx]);
+ }
}
if (entries > DCB_MAX_NUM_ENTRIES)
} dpconf;
struct {
struct sor_conf sor;
+ int slave_addr;
} tmdsconf;
};
bool i2c_upper_default;
if (nvbo->tile)
nv10_mem_expire_tiling(dev, nvbo->tile, NULL);
- spin_lock(&dev_priv->ttm.bo_list_lock);
- list_del(&nvbo->head);
- spin_unlock(&dev_priv->ttm.bo_list_lock);
kfree(nvbo);
}
}
nvbo->channel = NULL;
- spin_lock(&dev_priv->ttm.bo_list_lock);
- list_add_tail(&nvbo->head, &dev_priv->ttm.bo_list);
- spin_unlock(&dev_priv->ttm.bo_list_lock);
*pnvbo = nvbo;
return 0;
}
#include "nouveau_connector.h"
#include "nouveau_hw.h"
-static inline struct drm_encoder_slave_funcs *
-get_slave_funcs(struct nouveau_encoder *enc)
-{
- return to_encoder_slave(to_drm_encoder(enc))->slave_funcs;
-}
-
static struct nouveau_encoder *
find_encoder_by_type(struct drm_connector *connector, int type)
{
{
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
+ struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
struct drm_device *dev = connector->dev;
int ret;
}
if (nv_encoder && nv_encoder->dcb->type == OUTPUT_TV)
- return get_slave_funcs(nv_encoder)->
- set_property(to_drm_encoder(nv_encoder), connector, property, value);
+ return get_slave_funcs(encoder)->set_property(
+ encoder, connector, property, value);
return -EINVAL;
}
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
+ struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
int ret = 0;
/* destroy the native mode, the attached monitor could have changed.
}
if (nv_encoder->dcb->type == OUTPUT_TV)
- ret = get_slave_funcs(nv_encoder)->
- get_modes(to_drm_encoder(nv_encoder), connector);
+ ret = get_slave_funcs(encoder)->get_modes(encoder, connector);
if (nv_connector->dcb->type == DCB_CONNECTOR_LVDS ||
nv_connector->dcb->type == DCB_CONNECTOR_eDP)
struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
+ struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
unsigned min_clock = 25000, max_clock = min_clock;
unsigned clock = mode->clock;
max_clock = 350000;
break;
case OUTPUT_TV:
- return get_slave_funcs(nv_encoder)->
- mode_valid(to_drm_encoder(nv_encoder), mode);
+ return get_slave_funcs(encoder)->mode_valid(encoder, mode);
case OUTPUT_DP:
if (nv_encoder->dp.link_bw == DP_LINK_BW_2_7)
max_clock = nv_encoder->dp.link_nr * 270000;
gem = drm_gem_object_lookup(dev, file_priv, mode_cmd->handle);
if (!gem)
- return NULL;
+ return ERR_PTR(-ENOENT);
nouveau_fb = kzalloc(sizeof(struct nouveau_framebuffer), GFP_KERNEL);
if (!nouveau_fb)
- return NULL;
+ return ERR_PTR(-ENOMEM);
ret = nouveau_framebuffer_init(dev, nouveau_fb, mode_cmd, nouveau_gem_object(gem));
if (ret) {
drm_gem_object_unreference(gem);
- return NULL;
+ return ERR_PTR(ret);
}
return &nouveau_fb->base;
return ret ? ret : (stat & NV50_AUXCH_STAT_REPLY);
}
-int
-nouveau_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
- uint8_t write_byte, uint8_t *read_byte)
+static int
+nouveau_dp_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
{
- struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
- struct nouveau_i2c_chan *auxch = (struct nouveau_i2c_chan *)adapter;
+ struct nouveau_i2c_chan *auxch = (struct nouveau_i2c_chan *)adap;
struct drm_device *dev = auxch->dev;
- int ret = 0, cmd, addr = algo_data->address;
- uint8_t *buf;
-
- if (mode == MODE_I2C_READ) {
- cmd = AUX_I2C_READ;
- buf = read_byte;
- } else {
- cmd = (mode & MODE_I2C_READ) ? AUX_I2C_READ : AUX_I2C_WRITE;
- buf = &write_byte;
- }
+ struct i2c_msg *msg = msgs;
+ int ret, mcnt = num;
- if (!(mode & MODE_I2C_STOP))
- cmd |= AUX_I2C_MOT;
+ while (mcnt--) {
+ u8 remaining = msg->len;
+ u8 *ptr = msg->buf;
- if (mode & MODE_I2C_START)
- return 1;
+ while (remaining) {
+ u8 cnt = (remaining > 16) ? 16 : remaining;
+ u8 cmd;
- for (;;) {
- ret = nouveau_dp_auxch(auxch, cmd, addr, buf, 1);
- if (ret < 0)
- return ret;
-
- switch (ret & NV50_AUXCH_STAT_REPLY_I2C) {
- case NV50_AUXCH_STAT_REPLY_I2C_ACK:
- return 1;
- case NV50_AUXCH_STAT_REPLY_I2C_NACK:
- return -EREMOTEIO;
- case NV50_AUXCH_STAT_REPLY_I2C_DEFER:
- udelay(100);
- break;
- default:
- NV_ERROR(dev, "invalid auxch status: 0x%08x\n", ret);
- return -EREMOTEIO;
+ if (msg->flags & I2C_M_RD)
+ cmd = AUX_I2C_READ;
+ else
+ cmd = AUX_I2C_WRITE;
+
+ if (mcnt || remaining > 16)
+ cmd |= AUX_I2C_MOT;
+
+ ret = nouveau_dp_auxch(auxch, cmd, msg->addr, ptr, cnt);
+ if (ret < 0)
+ return ret;
+
+ switch (ret & NV50_AUXCH_STAT_REPLY_I2C) {
+ case NV50_AUXCH_STAT_REPLY_I2C_ACK:
+ break;
+ case NV50_AUXCH_STAT_REPLY_I2C_NACK:
+ return -EREMOTEIO;
+ case NV50_AUXCH_STAT_REPLY_I2C_DEFER:
+ udelay(100);
+ continue;
+ default:
+ NV_ERROR(dev, "bad auxch reply: 0x%08x\n", ret);
+ return -EREMOTEIO;
+ }
+
+ ptr += cnt;
+ remaining -= cnt;
}
+
+ msg++;
}
+
+ return num;
+}
+
+static u32
+nouveau_dp_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
+const struct i2c_algorithm nouveau_dp_i2c_algo = {
+ .master_xfer = nouveau_dp_i2c_xfer,
+ .functionality = nouveau_dp_i2c_func
+};
struct nv04_crtc_reg {
unsigned char MiscOutReg; /* */
- uint8_t CRTC[0x9f];
+ uint8_t CRTC[0xa0];
uint8_t CR58[0x10];
uint8_t Sequencer[5];
uint8_t Graphics[9];
NV_30 = 0x30,
NV_40 = 0x40,
NV_50 = 0x50,
+ NV_C0 = 0xc0,
};
struct drm_nouveau_private {
struct drm_global_reference mem_global_ref;
struct ttm_bo_global_ref bo_global_ref;
struct ttm_bo_device bdev;
- spinlock_t bo_list_lock;
- struct list_head bo_list;
atomic_t validate_sequence;
} ttm;
extern int nv50_fb_init(struct drm_device *);
extern void nv50_fb_takedown(struct drm_device *);
+/* nvc0_fb.c */
+extern int nvc0_fb_init(struct drm_device *);
+extern void nvc0_fb_takedown(struct drm_device *);
+
/* nv04_fifo.c */
extern int nv04_fifo_init(struct drm_device *);
extern void nv04_fifo_disable(struct drm_device *);
extern int nv50_fifo_load_context(struct nouveau_channel *);
extern int nv50_fifo_unload_context(struct drm_device *);
+/* nvc0_fifo.c */
+extern int nvc0_fifo_init(struct drm_device *);
+extern void nvc0_fifo_takedown(struct drm_device *);
+extern void nvc0_fifo_disable(struct drm_device *);
+extern void nvc0_fifo_enable(struct drm_device *);
+extern bool nvc0_fifo_reassign(struct drm_device *, bool);
+extern bool nvc0_fifo_cache_flush(struct drm_device *);
+extern bool nvc0_fifo_cache_pull(struct drm_device *, bool);
+extern int nvc0_fifo_channel_id(struct drm_device *);
+extern int nvc0_fifo_create_context(struct nouveau_channel *);
+extern void nvc0_fifo_destroy_context(struct nouveau_channel *);
+extern int nvc0_fifo_load_context(struct nouveau_channel *);
+extern int nvc0_fifo_unload_context(struct drm_device *);
+
/* nv04_graph.c */
extern struct nouveau_pgraph_object_class nv04_graph_grclass[];
extern int nv04_graph_init(struct drm_device *);
extern void nv50_graph_context_switch(struct drm_device *);
extern int nv50_grctx_init(struct nouveau_grctx *);
+/* nvc0_graph.c */
+extern int nvc0_graph_init(struct drm_device *);
+extern void nvc0_graph_takedown(struct drm_device *);
+extern void nvc0_graph_fifo_access(struct drm_device *, bool);
+extern struct nouveau_channel *nvc0_graph_channel(struct drm_device *);
+extern int nvc0_graph_create_context(struct nouveau_channel *);
+extern void nvc0_graph_destroy_context(struct nouveau_channel *);
+extern int nvc0_graph_load_context(struct nouveau_channel *);
+extern int nvc0_graph_unload_context(struct drm_device *);
+
/* nv04_instmem.c */
extern int nv04_instmem_init(struct drm_device *);
extern void nv04_instmem_takedown(struct drm_device *);
extern void nv84_instmem_flush(struct drm_device *);
extern void nv50_vm_flush(struct drm_device *, int engine);
+/* nvc0_instmem.c */
+extern int nvc0_instmem_init(struct drm_device *);
+extern void nvc0_instmem_takedown(struct drm_device *);
+extern int nvc0_instmem_suspend(struct drm_device *);
+extern void nvc0_instmem_resume(struct drm_device *);
+extern int nvc0_instmem_populate(struct drm_device *, struct nouveau_gpuobj *,
+ uint32_t *size);
+extern void nvc0_instmem_clear(struct drm_device *, struct nouveau_gpuobj *);
+extern int nvc0_instmem_bind(struct drm_device *, struct nouveau_gpuobj *);
+extern int nvc0_instmem_unbind(struct drm_device *, struct nouveau_gpuobj *);
+extern void nvc0_instmem_flush(struct drm_device *);
+
/* nv04_mc.c */
extern int nv04_mc_init(struct drm_device *);
extern void nv04_mc_takedown(struct drm_device *);
return &enc->base.base;
}
+static inline struct drm_encoder_slave_funcs *
+get_slave_funcs(struct drm_encoder *enc)
+{
+ return to_encoder_slave(enc)->slave_funcs;
+}
+
struct nouveau_connector *
nouveau_encoder_connector_get(struct nouveau_encoder *encoder);
int nv50_sor_create(struct drm_connector *, struct dcb_entry *);
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT |
FBINFO_HWACCEL_IMAGEBLIT;
+ info->flags |= FBINFO_CAN_FORCE_OUTPUT;
info->fbops = &nouveau_fbcon_ops;
info->fix.smem_start = dev->mode_config.fb_base + nvbo->bo.offset -
dev_priv->vm_vram_base;
if (dev_priv->channel && !nouveau_nofbaccel) {
switch (dev_priv->card_type) {
+ case NV_C0:
+ break;
case NV_50:
nv50_fbcon_accel_init(info);
info->fbops = &nv50_fbcon_ops;
if (!gem) {
NV_ERROR(dev, "Unknown handle 0x%08x\n", b->handle);
validate_fini(op, NULL);
- return -EINVAL;
+ return -ENOENT;
}
nvbo = gem->driver_private;
gem = drm_gem_object_lookup(dev, file_priv, req->handle);
if (!gem)
- return ret;
+ return -ENOENT;
nvbo = nouveau_gem_object(gem);
if (nvbo->cpu_filp) {
gem = drm_gem_object_lookup(dev, file_priv, req->handle);
if (!gem)
- return ret;
+ return -ENOENT;
nvbo = nouveau_gem_object(gem);
if (nvbo->cpu_filp != file_priv)
gem = drm_gem_object_lookup(dev, file_priv, req->handle);
if (!gem)
- return -EINVAL;
+ return -ENOENT;
ret = nouveau_gem_info(gem, req);
drm_gem_object_unreference_unlocked(gem);
rd_cio_state(dev, head, regp, NV_CIO_CRE_FF_INDEX);
rd_cio_state(dev, head, regp, NV_CIO_CRE_FFLWM__INDEX);
rd_cio_state(dev, head, regp, NV_CIO_CRE_21);
- if (dev_priv->card_type >= NV_30)
+
+ if (dev_priv->card_type >= NV_30) {
rd_cio_state(dev, head, regp, NV_CIO_CRE_47);
+ rd_cio_state(dev, head, regp, 0x9f);
+ }
+
rd_cio_state(dev, head, regp, NV_CIO_CRE_49);
rd_cio_state(dev, head, regp, NV_CIO_CRE_HCUR_ADDR0_INDEX);
rd_cio_state(dev, head, regp, NV_CIO_CRE_HCUR_ADDR1_INDEX);
wr_cio_state(dev, head, regp, NV_CIO_CRE_ENH_INDEX);
wr_cio_state(dev, head, regp, NV_CIO_CRE_FF_INDEX);
wr_cio_state(dev, head, regp, NV_CIO_CRE_FFLWM__INDEX);
- if (dev_priv->card_type >= NV_30)
+
+ if (dev_priv->card_type >= NV_30) {
wr_cio_state(dev, head, regp, NV_CIO_CRE_47);
+ wr_cio_state(dev, head, regp, 0x9f);
+ }
wr_cio_state(dev, head, regp, NV_CIO_CRE_49);
wr_cio_state(dev, head, regp, NV_CIO_CRE_HCUR_ADDR0_INDEX);
if (entry->chan)
return -EEXIST;
- if (dev_priv->card_type == NV_50 && entry->read >= NV50_I2C_PORTS) {
+ if (dev_priv->card_type == NV_C0 && entry->read >= NV50_I2C_PORTS) {
NV_ERROR(dev, "unknown i2c port %d\n", entry->read);
return -EINVAL;
}
switch (entry->port_type) {
case 0:
- i2c->algo.bit.setsda = nv04_i2c_setsda;
- i2c->algo.bit.setscl = nv04_i2c_setscl;
- i2c->algo.bit.getsda = nv04_i2c_getsda;
- i2c->algo.bit.getscl = nv04_i2c_getscl;
+ i2c->bit.setsda = nv04_i2c_setsda;
+ i2c->bit.setscl = nv04_i2c_setscl;
+ i2c->bit.getsda = nv04_i2c_getsda;
+ i2c->bit.getscl = nv04_i2c_getscl;
i2c->rd = entry->read;
i2c->wr = entry->write;
break;
case 4:
- i2c->algo.bit.setsda = nv4e_i2c_setsda;
- i2c->algo.bit.setscl = nv4e_i2c_setscl;
- i2c->algo.bit.getsda = nv4e_i2c_getsda;
- i2c->algo.bit.getscl = nv4e_i2c_getscl;
+ i2c->bit.setsda = nv4e_i2c_setsda;
+ i2c->bit.setscl = nv4e_i2c_setscl;
+ i2c->bit.getsda = nv4e_i2c_getsda;
+ i2c->bit.getscl = nv4e_i2c_getscl;
i2c->rd = 0x600800 + entry->read;
i2c->wr = 0x600800 + entry->write;
break;
case 5:
- i2c->algo.bit.setsda = nv50_i2c_setsda;
- i2c->algo.bit.setscl = nv50_i2c_setscl;
- i2c->algo.bit.getsda = nv50_i2c_getsda;
- i2c->algo.bit.getscl = nv50_i2c_getscl;
+ i2c->bit.setsda = nv50_i2c_setsda;
+ i2c->bit.setscl = nv50_i2c_setscl;
+ i2c->bit.getsda = nv50_i2c_getsda;
+ i2c->bit.getscl = nv50_i2c_getscl;
i2c->rd = nv50_i2c_port[entry->read];
i2c->wr = i2c->rd;
break;
i2c_set_adapdata(&i2c->adapter, i2c);
if (entry->port_type < 6) {
- i2c->adapter.algo_data = &i2c->algo.bit;
- i2c->algo.bit.udelay = 40;
- i2c->algo.bit.timeout = usecs_to_jiffies(5000);
- i2c->algo.bit.data = i2c;
+ i2c->adapter.algo_data = &i2c->bit;
+ i2c->bit.udelay = 40;
+ i2c->bit.timeout = usecs_to_jiffies(5000);
+ i2c->bit.data = i2c;
ret = i2c_bit_add_bus(&i2c->adapter);
} else {
- i2c->adapter.algo_data = &i2c->algo.dp;
- i2c->algo.dp.running = false;
- i2c->algo.dp.address = 0;
- i2c->algo.dp.aux_ch = nouveau_dp_i2c_aux_ch;
- ret = i2c_dp_aux_add_bus(&i2c->adapter);
+ i2c->adapter.algo = &nouveau_dp_i2c_algo;
+ ret = i2c_add_adapter(&i2c->adapter);
}
if (ret) {
struct nouveau_i2c_chan {
struct i2c_adapter adapter;
struct drm_device *dev;
- union {
- struct i2c_algo_bit_data bit;
- struct i2c_algo_dp_aux_data dp;
- } algo;
+ struct i2c_algo_bit_data bit;
unsigned rd;
unsigned wr;
unsigned data;
int nouveau_i2c_identify(struct drm_device *dev, const char *what,
struct i2c_board_info *info, int index);
-int nouveau_dp_i2c_aux_ch(struct i2c_adapter *, int mode, uint8_t write_byte,
- uint8_t *read_byte);
+extern const struct i2c_algorithm nouveau_dp_i2c_algo;
#endif /* __NOUVEAU_I2C_H__ */
/* Master disable */
nv_wr32(dev, NV03_PMC_INTR_EN_0, 0);
- if (dev_priv->card_type == NV_50) {
+ if (dev_priv->card_type >= NV_50) {
INIT_WORK(&dev_priv->irq_work, nv50_display_irq_handler_bh);
INIT_WORK(&dev_priv->hpd_work, nv50_display_irq_hotplug_bh);
INIT_LIST_HEAD(&dev_priv->vbl_waiting);
}
if (status & NV_PGRAPH_INTR_CONTEXT_SWITCH) {
- nouveau_pgraph_intr_context_switch(dev);
-
status &= ~NV_PGRAPH_INTR_CONTEXT_SWITCH;
nv_wr32(dev, NV03_PGRAPH_INTR,
NV_PGRAPH_INTR_CONTEXT_SWITCH);
+
+ nouveau_pgraph_intr_context_switch(dev);
}
if (status) {
if (dev_priv->card_type < NV_50) {
dev_priv->vram_size = nv_rd32(dev, NV04_PFB_FIFO_DATA);
dev_priv->vram_size &= NV10_PFB_FIFO_DATA_RAM_AMOUNT_MB_MASK;
- } else {
+ } else
+ if (dev_priv->card_type < NV_C0) {
dev_priv->vram_size = nv_rd32(dev, NV04_PFB_FIFO_DATA);
dev_priv->vram_size |= (dev_priv->vram_size & 0xff) << 32;
dev_priv->vram_size &= 0xffffffff00ll;
dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10);
dev_priv->vram_sys_base <<= 12;
}
+ } else {
+ dev_priv->vram_size = nv_rd32(dev, 0x10f20c) << 20;
+ dev_priv->vram_size *= nv_rd32(dev, 0x121c74);
}
NV_INFO(dev, "Detected %dMiB VRAM\n", (int)(dev_priv->vram_size >> 20));
/* First of all, disable fast writes, otherwise if it's
* already enabled in the AGP bridge and we disable the card's
* AGP controller we might be locking ourselves out of it. */
- if (dev->agp->acquired) {
+ if (nv_rd32(dev, NV04_PBUS_PCI_NV_19) & PCI_AGP_COMMAND_FW) {
struct drm_agp_info info;
struct drm_agp_mode mode;
if (ret)
return ret;
- mode.mode = info.mode & ~0x10;
+ mode.mode = info.mode & ~PCI_AGP_COMMAND_FW;
ret = drm_agp_enable(dev, mode);
if (ret)
return ret;
}
}
+ nouveau_mem_reset_agp(dev);
+
ret = drm_agp_info(dev, &info);
if (ret) {
NV_ERROR(dev, "Unable to get AGP info: %d\n", ret);
return ret;
}
- INIT_LIST_HEAD(&dev_priv->ttm.bo_list);
- spin_lock_init(&dev_priv->ttm.bo_list_lock);
spin_lock_init(&dev_priv->tile.lock);
dev_priv->fb_available_size = dev_priv->vram_size;
/* GART */
#if !defined(__powerpc__) && !defined(__ia64__)
if (drm_device_is_agp(dev) && dev->agp && !nouveau_noagp) {
- nouveau_mem_reset_agp(dev);
ret = nouveau_mem_init_agp(dev);
if (ret)
NV_ERROR(dev, "Error initialising AGP: %d\n", ret);
# define NV_PGRAPH_INTR_ERROR (1<<20)
#define NV10_PGRAPH_CTX_CONTROL 0x00400144
#define NV10_PGRAPH_CTX_USER 0x00400148
-#define NV10_PGRAPH_CTX_SWITCH1 0x0040014C
-#define NV10_PGRAPH_CTX_SWITCH2 0x00400150
-#define NV10_PGRAPH_CTX_SWITCH3 0x00400154
-#define NV10_PGRAPH_CTX_SWITCH4 0x00400158
-#define NV10_PGRAPH_CTX_SWITCH5 0x0040015C
+#define NV10_PGRAPH_CTX_SWITCH(i) (0x0040014C + 0x4*(i))
#define NV04_PGRAPH_CTX_SWITCH1 0x00400160
-#define NV10_PGRAPH_CTX_CACHE1 0x00400160
+#define NV10_PGRAPH_CTX_CACHE(i, j) (0x00400160 \
+ + 0x4*(i) + 0x20*(j))
#define NV04_PGRAPH_CTX_SWITCH2 0x00400164
#define NV04_PGRAPH_CTX_SWITCH3 0x00400168
#define NV04_PGRAPH_CTX_SWITCH4 0x0040016C
#define NV04_PGRAPH_CTX_CONTROL 0x00400170
#define NV04_PGRAPH_CTX_USER 0x00400174
#define NV04_PGRAPH_CTX_CACHE1 0x00400180
-#define NV10_PGRAPH_CTX_CACHE2 0x00400180
#define NV03_PGRAPH_CTX_CONTROL 0x00400190
#define NV03_PGRAPH_CTX_USER 0x00400194
#define NV04_PGRAPH_CTX_CACHE2 0x004001A0
-#define NV10_PGRAPH_CTX_CACHE3 0x004001A0
#define NV04_PGRAPH_CTX_CACHE3 0x004001C0
-#define NV10_PGRAPH_CTX_CACHE4 0x004001C0
#define NV04_PGRAPH_CTX_CACHE4 0x004001E0
-#define NV10_PGRAPH_CTX_CACHE5 0x004001E0
#define NV40_PGRAPH_CTXCTL_0304 0x00400304
#define NV40_PGRAPH_CTXCTL_0304_XFER_CTX 0x00000001
#define NV40_PGRAPH_CTXCTL_UCODE_STAT 0x00400308
#define NV04_PGRAPH_FFINTFC_ST2 0x00400754
#define NV10_PGRAPH_RDI_DATA 0x00400754
#define NV04_PGRAPH_DMA_PITCH 0x00400760
-#define NV10_PGRAPH_FFINTFC_ST2 0x00400764
+#define NV10_PGRAPH_FFINTFC_FIFO_PTR 0x00400760
#define NV04_PGRAPH_DVD_COLORFMT 0x00400764
+#define NV10_PGRAPH_FFINTFC_ST2 0x00400764
#define NV04_PGRAPH_SCALED_FORMAT 0x00400768
+#define NV10_PGRAPH_FFINTFC_ST2_DL 0x00400768
+#define NV10_PGRAPH_FFINTFC_ST2_DH 0x0040076c
#define NV10_PGRAPH_DMA_PITCH 0x00400770
#define NV10_PGRAPH_DVD_COLORFMT 0x00400774
#define NV10_PGRAPH_SCALED_FORMAT 0x00400778
engine->gpio.set = nv50_gpio_set;
engine->gpio.irq_enable = nv50_gpio_irq_enable;
break;
+ case 0xC0:
+ engine->instmem.init = nvc0_instmem_init;
+ engine->instmem.takedown = nvc0_instmem_takedown;
+ engine->instmem.suspend = nvc0_instmem_suspend;
+ engine->instmem.resume = nvc0_instmem_resume;
+ engine->instmem.populate = nvc0_instmem_populate;
+ engine->instmem.clear = nvc0_instmem_clear;
+ engine->instmem.bind = nvc0_instmem_bind;
+ engine->instmem.unbind = nvc0_instmem_unbind;
+ engine->instmem.flush = nvc0_instmem_flush;
+ engine->mc.init = nv50_mc_init;
+ engine->mc.takedown = nv50_mc_takedown;
+ engine->timer.init = nv04_timer_init;
+ engine->timer.read = nv04_timer_read;
+ engine->timer.takedown = nv04_timer_takedown;
+ engine->fb.init = nvc0_fb_init;
+ engine->fb.takedown = nvc0_fb_takedown;
+ engine->graph.grclass = NULL; //nvc0_graph_grclass;
+ engine->graph.init = nvc0_graph_init;
+ engine->graph.takedown = nvc0_graph_takedown;
+ engine->graph.fifo_access = nvc0_graph_fifo_access;
+ engine->graph.channel = nvc0_graph_channel;
+ engine->graph.create_context = nvc0_graph_create_context;
+ engine->graph.destroy_context = nvc0_graph_destroy_context;
+ engine->graph.load_context = nvc0_graph_load_context;
+ engine->graph.unload_context = nvc0_graph_unload_context;
+ engine->fifo.channels = 128;
+ engine->fifo.init = nvc0_fifo_init;
+ engine->fifo.takedown = nvc0_fifo_takedown;
+ engine->fifo.disable = nvc0_fifo_disable;
+ engine->fifo.enable = nvc0_fifo_enable;
+ engine->fifo.reassign = nvc0_fifo_reassign;
+ engine->fifo.channel_id = nvc0_fifo_channel_id;
+ engine->fifo.create_context = nvc0_fifo_create_context;
+ engine->fifo.destroy_context = nvc0_fifo_destroy_context;
+ engine->fifo.load_context = nvc0_fifo_load_context;
+ engine->fifo.unload_context = nvc0_fifo_unload_context;
+ engine->display.early_init = nv50_display_early_init;
+ engine->display.late_takedown = nv50_display_late_takedown;
+ engine->display.create = nv50_display_create;
+ engine->display.init = nv50_display_init;
+ engine->display.destroy = nv50_display_destroy;
+ engine->gpio.init = nv50_gpio_init;
+ engine->gpio.takedown = nouveau_stub_takedown;
+ engine->gpio.get = nv50_gpio_get;
+ engine->gpio.set = nv50_gpio_set;
+ engine->gpio.irq_enable = nv50_gpio_irq_enable;
+ break;
default:
NV_ERROR(dev, "NV%02x unsupported\n", dev_priv->chipset);
return 1;
int ret;
dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
- if (!dev_priv)
- return -ENOMEM;
+ if (!dev_priv) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
dev->dev_private = dev_priv;
dev_priv->dev = dev;
dev->pci_vendor, dev->pci_device, dev->pdev->class);
dev_priv->wq = create_workqueue("nouveau");
- if (!dev_priv->wq)
- return -EINVAL;
+ if (!dev_priv->wq) {
+ ret = -EINVAL;
+ goto err_priv;
+ }
/* resource 0 is mmio regs */
/* resource 1 is linear FB */
if (!dev_priv->mmio) {
NV_ERROR(dev, "Unable to initialize the mmio mapping. "
"Please report your setup to " DRIVER_EMAIL "\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_wq;
}
NV_DEBUG(dev, "regs mapped ok at 0x%llx\n",
(unsigned long long)mmio_start_offs);
case 0xa0:
dev_priv->card_type = NV_50;
break;
+ case 0xc0:
+ dev_priv->card_type = NV_C0;
+ break;
default:
NV_INFO(dev, "Unsupported chipset 0x%08x\n", reg0);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_mmio;
}
NV_INFO(dev, "Detected an NV%2x generation card (0x%08x)\n",
ret = nouveau_remove_conflicting_drivers(dev);
if (ret)
- return ret;
+ goto err_mmio;
/* Map PRAMIN BAR, or on older cards, the aperture withing BAR0 */
if (dev_priv->card_type >= NV_40) {
dev_priv->ramin_size);
if (!dev_priv->ramin) {
NV_ERROR(dev, "Failed to PRAMIN BAR");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_mmio;
}
} else {
dev_priv->ramin_size = 1 * 1024 * 1024;
dev_priv->ramin_size);
if (!dev_priv->ramin) {
NV_ERROR(dev, "Failed to map BAR0 PRAMIN.\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_mmio;
}
}
/* For kernel modesetting, init card now and bring up fbcon */
ret = nouveau_card_init(dev);
if (ret)
- return ret;
+ goto err_ramin;
return 0;
+
+err_ramin:
+ iounmap(dev_priv->ramin);
+err_mmio:
+ iounmap(dev_priv->mmio);
+err_wq:
+ destroy_workqueue(dev_priv->wq);
+err_priv:
+ kfree(dev_priv);
+ dev->dev_private = NULL;
+err_out:
+ return ret;
}
void nouveau_lastclose(struct drm_device *dev)
* 1 << 30 on 0x60.830), for no apparent reason */
regp->CRTC[NV_CIO_CRE_59] = off_chip_digital;
+ if (dev_priv->card_type >= NV_30)
+ regp->CRTC[0x9f] = off_chip_digital ? 0x11 : 0x1;
+
regp->crtc_830 = mode->crtc_vdisplay - 3;
regp->crtc_834 = mode->crtc_vdisplay - 1;
}
static void
-nv_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, uint32_t size)
+nv_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, uint32_t start,
+ uint32_t size)
{
+ int end = (start + size > 256) ? 256 : start + size, i;
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
- int i;
- if (size != 256)
- return;
-
- for (i = 0; i < 256; i++) {
+ for (i = start; i < end; i++) {
nv_crtc->lut.r[i] = r[i];
nv_crtc->lut.g[i] = g[i];
nv_crtc->lut.b[i] = b[i];
gem = drm_gem_object_lookup(dev, file_priv, buffer_handle);
if (!gem)
- return -EINVAL;
+ return -ENOENT;
cursor = nouveau_gem_object(gem);
ret = nouveau_bo_map(cursor);
#include "nouveau_hw.h"
#include "nvreg.h"
+#include "i2c/sil164.h"
+
#define FP_TG_CONTROL_ON (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS | \
NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS | \
NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS)
}
}
+static struct drm_encoder *get_tmds_slave(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
+ struct drm_encoder *slave;
+
+ if (dcb->type != OUTPUT_TMDS || dcb->location == DCB_LOC_ON_CHIP)
+ return NULL;
+
+ /* Some BIOSes (e.g. the one in a Quadro FX1000) report several
+ * TMDS transmitters at the same I2C address, in the same I2C
+ * bus. This can still work because in that case one of them is
+ * always hard-wired to a reasonable configuration using straps,
+ * and the other one needs to be programmed.
+ *
+ * I don't think there's a way to know which is which, even the
+ * blob programs the one exposed via I2C for *both* heads, so
+ * let's do the same.
+ */
+ list_for_each_entry(slave, &dev->mode_config.encoder_list, head) {
+ struct dcb_entry *slave_dcb = nouveau_encoder(slave)->dcb;
+
+ if (slave_dcb->type == OUTPUT_TMDS && get_slave_funcs(slave) &&
+ slave_dcb->tmdsconf.slave_addr == dcb->tmdsconf.slave_addr)
+ return slave;
+ }
+
+ return NULL;
+}
+
static bool nv04_dfp_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
else
NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0x00100000);
+ /* Init external transmitters */
+ if (get_tmds_slave(encoder))
+ get_slave_funcs(get_tmds_slave(encoder))->mode_set(
+ encoder, &nv_encoder->mode, &nv_encoder->mode);
+
helper->dpms(encoder, DRM_MODE_DPMS_ON);
NV_INFO(dev, "Output %s is running on CRTC %d using output %c\n",
NV_DEBUG_KMS(encoder->dev, "\n");
+ if (get_slave_funcs(encoder))
+ get_slave_funcs(encoder)->destroy(encoder);
+
drm_encoder_cleanup(encoder);
kfree(nv_encoder);
}
+static void nv04_tmds_slave_init(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
+ struct nouveau_i2c_chan *i2c = nouveau_i2c_find(dev, 2);
+ struct i2c_board_info info[] = {
+ {
+ .type = "sil164",
+ .addr = (dcb->tmdsconf.slave_addr == 0x7 ? 0x3a : 0x38),
+ .platform_data = &(struct sil164_encoder_params) {
+ SIL164_INPUT_EDGE_RISING
+ }
+ },
+ { }
+ };
+ int type;
+
+ if (!nv_gf4_disp_arch(dev) || !i2c ||
+ get_tmds_slave(encoder))
+ return;
+
+ type = nouveau_i2c_identify(dev, "TMDS transmitter", info, 2);
+ if (type < 0)
+ return;
+
+ drm_i2c_encoder_init(dev, to_encoder_slave(encoder),
+ &i2c->adapter, &info[type]);
+}
+
static const struct drm_encoder_helper_funcs nv04_lvds_helper_funcs = {
.dpms = nv04_lvds_dpms,
.save = nv04_dfp_save,
encoder->possible_crtcs = entry->heads;
encoder->possible_clones = 0;
+ if (entry->type == OUTPUT_TMDS &&
+ entry->location != DCB_LOC_ON_CHIP)
+ nv04_tmds_slave_init(encoder);
+
drm_mode_connector_attach_encoder(connector, encoder);
return 0;
}
NVWriteRAMDAC(dev, 0, NV_PRAMDAC_PLL_COEFF_SELECT, state->pllsel);
- to_encoder_slave(encoder)->slave_funcs->dpms(encoder, mode);
+ get_slave_funcs(encoder)->dpms(encoder, mode);
}
static void nv04_tv_bind(struct drm_device *dev, int head, bool bind)
regp->tv_vskew = 1;
regp->tv_vsync_delay = 1;
- to_encoder_slave(encoder)->slave_funcs->mode_set(encoder, mode, adjusted_mode);
+ get_slave_funcs(encoder)->mode_set(encoder, mode, adjusted_mode);
}
static void nv04_tv_commit(struct drm_encoder *encoder)
static void nv04_tv_destroy(struct drm_encoder *encoder)
{
- to_encoder_slave(encoder)->slave_funcs->destroy(encoder);
-
+ get_slave_funcs(encoder)->destroy(encoder);
drm_encoder_cleanup(encoder);
kfree(encoder->helper_private);
goto fail_cleanup;
/* Fill the function pointers */
- sfuncs = to_encoder_slave(encoder)->slave_funcs;
+ sfuncs = get_slave_funcs(encoder);
*hfuncs = (struct drm_encoder_helper_funcs) {
.dpms = nv04_tv_dpms,
};
/* Attach it to the specified connector. */
- sfuncs->set_config(encoder, nv04_tv_encoder_info[type].platform_data);
sfuncs->create_resources(encoder, connector);
drm_mode_connector_attach_encoder(connector, encoder);
};
static int nv10_graph_ctx_regs[] = {
- NV10_PGRAPH_CTX_SWITCH1,
- NV10_PGRAPH_CTX_SWITCH2,
- NV10_PGRAPH_CTX_SWITCH3,
- NV10_PGRAPH_CTX_SWITCH4,
- NV10_PGRAPH_CTX_SWITCH5,
- NV10_PGRAPH_CTX_CACHE1, /* 8 values from 0x400160 to 0x40017c */
- NV10_PGRAPH_CTX_CACHE2, /* 8 values from 0x400180 to 0x40019c */
- NV10_PGRAPH_CTX_CACHE3, /* 8 values from 0x4001a0 to 0x4001bc */
- NV10_PGRAPH_CTX_CACHE4, /* 8 values from 0x4001c0 to 0x4001dc */
- NV10_PGRAPH_CTX_CACHE5, /* 8 values from 0x4001e0 to 0x4001fc */
- 0x00400164,
- 0x00400184,
- 0x004001a4,
- 0x004001c4,
- 0x004001e4,
- 0x00400168,
- 0x00400188,
- 0x004001a8,
- 0x004001c8,
- 0x004001e8,
- 0x0040016c,
- 0x0040018c,
- 0x004001ac,
- 0x004001cc,
- 0x004001ec,
- 0x00400170,
- 0x00400190,
- 0x004001b0,
- 0x004001d0,
- 0x004001f0,
- 0x00400174,
- 0x00400194,
- 0x004001b4,
- 0x004001d4,
- 0x004001f4,
- 0x00400178,
- 0x00400198,
- 0x004001b8,
- 0x004001d8,
- 0x004001f8,
- 0x0040017c,
- 0x0040019c,
- 0x004001bc,
- 0x004001dc,
- 0x004001fc,
+ NV10_PGRAPH_CTX_SWITCH(0),
+ NV10_PGRAPH_CTX_SWITCH(1),
+ NV10_PGRAPH_CTX_SWITCH(2),
+ NV10_PGRAPH_CTX_SWITCH(3),
+ NV10_PGRAPH_CTX_SWITCH(4),
+ NV10_PGRAPH_CTX_CACHE(0, 0),
+ NV10_PGRAPH_CTX_CACHE(0, 1),
+ NV10_PGRAPH_CTX_CACHE(0, 2),
+ NV10_PGRAPH_CTX_CACHE(0, 3),
+ NV10_PGRAPH_CTX_CACHE(0, 4),
+ NV10_PGRAPH_CTX_CACHE(1, 0),
+ NV10_PGRAPH_CTX_CACHE(1, 1),
+ NV10_PGRAPH_CTX_CACHE(1, 2),
+ NV10_PGRAPH_CTX_CACHE(1, 3),
+ NV10_PGRAPH_CTX_CACHE(1, 4),
+ NV10_PGRAPH_CTX_CACHE(2, 0),
+ NV10_PGRAPH_CTX_CACHE(2, 1),
+ NV10_PGRAPH_CTX_CACHE(2, 2),
+ NV10_PGRAPH_CTX_CACHE(2, 3),
+ NV10_PGRAPH_CTX_CACHE(2, 4),
+ NV10_PGRAPH_CTX_CACHE(3, 0),
+ NV10_PGRAPH_CTX_CACHE(3, 1),
+ NV10_PGRAPH_CTX_CACHE(3, 2),
+ NV10_PGRAPH_CTX_CACHE(3, 3),
+ NV10_PGRAPH_CTX_CACHE(3, 4),
+ NV10_PGRAPH_CTX_CACHE(4, 0),
+ NV10_PGRAPH_CTX_CACHE(4, 1),
+ NV10_PGRAPH_CTX_CACHE(4, 2),
+ NV10_PGRAPH_CTX_CACHE(4, 3),
+ NV10_PGRAPH_CTX_CACHE(4, 4),
+ NV10_PGRAPH_CTX_CACHE(5, 0),
+ NV10_PGRAPH_CTX_CACHE(5, 1),
+ NV10_PGRAPH_CTX_CACHE(5, 2),
+ NV10_PGRAPH_CTX_CACHE(5, 3),
+ NV10_PGRAPH_CTX_CACHE(5, 4),
+ NV10_PGRAPH_CTX_CACHE(6, 0),
+ NV10_PGRAPH_CTX_CACHE(6, 1),
+ NV10_PGRAPH_CTX_CACHE(6, 2),
+ NV10_PGRAPH_CTX_CACHE(6, 3),
+ NV10_PGRAPH_CTX_CACHE(6, 4),
+ NV10_PGRAPH_CTX_CACHE(7, 0),
+ NV10_PGRAPH_CTX_CACHE(7, 1),
+ NV10_PGRAPH_CTX_CACHE(7, 2),
+ NV10_PGRAPH_CTX_CACHE(7, 3),
+ NV10_PGRAPH_CTX_CACHE(7, 4),
NV10_PGRAPH_CTX_USER,
NV04_PGRAPH_DMA_START_0,
NV04_PGRAPH_DMA_START_1,
return -1;
}
+static void nv10_graph_load_dma_vtxbuf(struct nouveau_channel *chan,
+ uint32_t inst)
+{
+ struct drm_device *dev = chan->dev;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
+ uint32_t st2, st2_dl, st2_dh, fifo_ptr, fifo[0x60/4];
+ uint32_t ctx_user, ctx_switch[5];
+ int i, subchan = -1;
+
+ /* NV10TCL_DMA_VTXBUF (method 0x18c) modifies hidden state
+ * that cannot be restored via MMIO. Do it through the FIFO
+ * instead.
+ */
+
+ /* Look for a celsius object */
+ for (i = 0; i < 8; i++) {
+ int class = nv_rd32(dev, NV10_PGRAPH_CTX_CACHE(i, 0)) & 0xfff;
+
+ if (class == 0x56 || class == 0x96 || class == 0x99) {
+ subchan = i;
+ break;
+ }
+ }
+
+ if (subchan < 0 || !inst)
+ return;
+
+ /* Save the current ctx object */
+ ctx_user = nv_rd32(dev, NV10_PGRAPH_CTX_USER);
+ for (i = 0; i < 5; i++)
+ ctx_switch[i] = nv_rd32(dev, NV10_PGRAPH_CTX_SWITCH(i));
+
+ /* Save the FIFO state */
+ st2 = nv_rd32(dev, NV10_PGRAPH_FFINTFC_ST2);
+ st2_dl = nv_rd32(dev, NV10_PGRAPH_FFINTFC_ST2_DL);
+ st2_dh = nv_rd32(dev, NV10_PGRAPH_FFINTFC_ST2_DH);
+ fifo_ptr = nv_rd32(dev, NV10_PGRAPH_FFINTFC_FIFO_PTR);
+
+ for (i = 0; i < ARRAY_SIZE(fifo); i++)
+ fifo[i] = nv_rd32(dev, 0x4007a0 + 4 * i);
+
+ /* Switch to the celsius subchannel */
+ for (i = 0; i < 5; i++)
+ nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH(i),
+ nv_rd32(dev, NV10_PGRAPH_CTX_CACHE(subchan, i)));
+ nv_mask(dev, NV10_PGRAPH_CTX_USER, 0xe000, subchan << 13);
+
+ /* Inject NV10TCL_DMA_VTXBUF */
+ nv_wr32(dev, NV10_PGRAPH_FFINTFC_FIFO_PTR, 0);
+ nv_wr32(dev, NV10_PGRAPH_FFINTFC_ST2,
+ 0x2c000000 | chan->id << 20 | subchan << 16 | 0x18c);
+ nv_wr32(dev, NV10_PGRAPH_FFINTFC_ST2_DL, inst);
+ nv_mask(dev, NV10_PGRAPH_CTX_CONTROL, 0, 0x10000);
+ pgraph->fifo_access(dev, true);
+ pgraph->fifo_access(dev, false);
+
+ /* Restore the FIFO state */
+ for (i = 0; i < ARRAY_SIZE(fifo); i++)
+ nv_wr32(dev, 0x4007a0 + 4 * i, fifo[i]);
+
+ nv_wr32(dev, NV10_PGRAPH_FFINTFC_FIFO_PTR, fifo_ptr);
+ nv_wr32(dev, NV10_PGRAPH_FFINTFC_ST2, st2);
+ nv_wr32(dev, NV10_PGRAPH_FFINTFC_ST2_DL, st2_dl);
+ nv_wr32(dev, NV10_PGRAPH_FFINTFC_ST2_DH, st2_dh);
+
+ /* Restore the current ctx object */
+ for (i = 0; i < 5; i++)
+ nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH(i), ctx_switch[i]);
+ nv_wr32(dev, NV10_PGRAPH_CTX_USER, ctx_user);
+}
+
int nv10_graph_load_context(struct nouveau_channel *chan)
{
struct drm_device *dev = chan->dev;
}
nv10_graph_load_pipe(chan);
+ nv10_graph_load_dma_vtxbuf(chan, (nv_rd32(dev, NV10_PGRAPH_GLOBALSTATE1)
+ & 0xffff));
nv_wr32(dev, NV10_PGRAPH_CTX_CONTROL, 0x10010100);
tmp = nv_rd32(dev, NV10_PGRAPH_CTX_USER);
for (i = 0; i < NV10_PFB_TILE__SIZE; i++)
nv10_graph_set_region_tiling(dev, i, 0, 0, 0);
- nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH1, 0x00000000);
- nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH2, 0x00000000);
- nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH3, 0x00000000);
- nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH4, 0x00000000);
- nv_wr32(dev, NV10_PGRAPH_STATE , 0xFFFFFFFF);
+ nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH(0), 0x00000000);
+ nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH(1), 0x00000000);
+ nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH(2), 0x00000000);
+ nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH(3), 0x00000000);
+ nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH(4), 0x00000000);
+ nv_wr32(dev, NV10_PGRAPH_STATE, 0xFFFFFFFF);
tmp = nv_rd32(dev, NV10_PGRAPH_CTX_USER) & 0x00ffffff;
tmp |= (dev_priv->engine.fifo.channels - 1) << 24;
#include "nouveau_drm.h"
static int
-calc_ref(int b, int l, int i)
+calc_bias(struct drm_device *dev, int k, int i, int j)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ int b = (dev_priv->chipset > 0x30 ?
+ nv_rd32(dev, 0x122c + 0x10 * k + 0x4 * j) >> (4 * (i ^ 1)) :
+ 0) & 0xf;
+
+ return 2 * (b & 0x8 ? b - 0x10 : b);
+}
+
+static int
+calc_ref(struct drm_device *dev, int l, int k, int i)
{
int j, x = 0;
for (j = 0; j < 4; j++) {
- int n = (b >> (8 * j) & 0xf);
- int m = (l >> (8 * i) & 0xff) + 2 * (n & 0x8 ? n - 0x10 : n);
+ int m = (l >> (8 * i) & 0xff) + calc_bias(dev, k, i, j);
- x |= (0x80 | (m & 0x1f)) << (8 * j);
+ x |= (0x80 | clamp(m, 0, 0x1f)) << (8 * j);
}
return x;
dev_priv->chipset == 0x35) {
/* Related to ROP count */
int n = (dev_priv->chipset == 0x31 ? 2 : 4);
- int b = (dev_priv->chipset > 0x30 ?
- nv_rd32(dev, 0x122c) & 0xf : 0);
int l = nv_rd32(dev, 0x1003d0);
for (i = 0; i < n; i++) {
for (j = 0; j < 3; j++)
nv_wr32(dev, 0x10037c + 0xc * i + 0x4 * j,
- calc_ref(b, l, j));
+ calc_ref(dev, l, 0, j));
for (j = 0; j < 2; j++)
nv_wr32(dev, 0x1003ac + 0x8 * i + 0x4 * j,
- calc_ref(b, l, j));
+ calc_ref(dev, l, 1, j));
}
}
int
nv50_crtc_set_clock(struct drm_device *dev, int head, int pclk)
{
- uint32_t reg = NV50_PDISPLAY_CRTC_CLK_CTRL1(head);
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
struct pll_lims pll;
- uint32_t reg1, reg2;
+ uint32_t reg, reg1, reg2;
int ret, N1, M1, N2, M2, P;
+ if (dev_priv->chipset < NV_C0)
+ reg = NV50_PDISPLAY_CRTC_CLK_CTRL1(head);
+ else
+ reg = 0x614140 + (head * 0x800);
+
ret = get_pll_limits(dev, reg, &pll);
if (ret)
return ret;
nv_wr32(dev, reg, 0x10000611);
nv_wr32(dev, reg + 4, reg1 | (M1 << 16) | N1);
nv_wr32(dev, reg + 8, reg2 | (P << 28) | (M2 << 16) | N2);
- } else {
+ } else
+ if (dev_priv->chipset < NV_C0) {
ret = nv50_calc_pll2(dev, &pll, pclk, &N1, &N2, &M1, &P);
if (ret <= 0)
return 0;
nv_wr32(dev, reg, 0x50000610);
nv_wr32(dev, reg + 4, reg1 | (P << 16) | (M1 << 8) | N1);
nv_wr32(dev, reg + 8, N2);
+ } else {
+ ret = nv50_calc_pll2(dev, &pll, pclk, &N1, &N2, &M1, &P);
+ if (ret <= 0)
+ return 0;
+
+ NV_DEBUG(dev, "pclk %d out %d N %d fN 0x%04x M %d P %d\n",
+ pclk, ret, N1, N2, M1, P);
+
+ nv_mask(dev, reg + 0x0c, 0x00000000, 0x00000100);
+ nv_wr32(dev, reg + 0x04, (P << 16) | (N1 << 8) | M1);
+ nv_wr32(dev, reg + 0x10, N2 << 16);
}
return 0;
gem = drm_gem_object_lookup(dev, file_priv, buffer_handle);
if (!gem)
- return -EINVAL;
+ return -ENOENT;
cursor = nouveau_gem_object(gem);
ret = nouveau_bo_map(cursor);
static void
nv50_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
- uint32_t size)
+ uint32_t start, uint32_t size)
{
+ int end = (start + size > 256) ? 256 : start + size, i;
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
- int i;
-
- if (size != 256)
- return;
- for (i = 0; i < 256; i++) {
+ for (i = start; i < end; i++) {
nv_crtc->lut.r[i] = r[i];
nv_crtc->lut.g[i] = g[i];
nv_crtc->lut.b[i] = b[i];
nv_wo32(dev, obj, 2, offset);
nv_wo32(dev, obj, 3, 0x00000000);
nv_wo32(dev, obj, 4, 0x00000000);
- nv_wo32(dev, obj, 5, 0x00010000);
+ if (dev_priv->card_type < NV_C0)
+ nv_wo32(dev, obj, 5, 0x00010000);
+ else
+ nv_wo32(dev, obj, 5, 0x00020000);
dev_priv->engine.instmem.flush(dev);
return 0;
--- /dev/null
+/*
+ * Copyright 2010 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs
+ */
+
+#include "drmP.h"
+
+#include "nouveau_drv.h"
+
+int
+nvc0_fb_init(struct drm_device *dev)
+{
+ return 0;
+}
+
+void
+nvc0_fb_takedown(struct drm_device *dev)
+{
+}
--- /dev/null
+/*
+ * Copyright 2010 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs
+ */
+
+#include "drmP.h"
+
+#include "nouveau_drv.h"
+
+void
+nvc0_fifo_disable(struct drm_device *dev)
+{
+}
+
+void
+nvc0_fifo_enable(struct drm_device *dev)
+{
+}
+
+bool
+nvc0_fifo_reassign(struct drm_device *dev, bool enable)
+{
+ return false;
+}
+
+bool
+nvc0_fifo_cache_flush(struct drm_device *dev)
+{
+ return true;
+}
+
+bool
+nvc0_fifo_cache_pull(struct drm_device *dev, bool enable)
+{
+ return false;
+}
+
+int
+nvc0_fifo_channel_id(struct drm_device *dev)
+{
+ return 127;
+}
+
+int
+nvc0_fifo_create_context(struct nouveau_channel *chan)
+{
+ return 0;
+}
+
+void
+nvc0_fifo_destroy_context(struct nouveau_channel *chan)
+{
+}
+
+int
+nvc0_fifo_load_context(struct nouveau_channel *chan)
+{
+ return 0;
+}
+
+int
+nvc0_fifo_unload_context(struct drm_device *dev)
+{
+ return 0;
+}
+
+void
+nvc0_fifo_takedown(struct drm_device *dev)
+{
+}
+
+int
+nvc0_fifo_init(struct drm_device *dev)
+{
+ return 0;
+}
+
--- /dev/null
+/*
+ * Copyright 2010 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs
+ */
+
+#include "drmP.h"
+
+#include "nouveau_drv.h"
+
+void
+nvc0_graph_fifo_access(struct drm_device *dev, bool enabled)
+{
+}
+
+struct nouveau_channel *
+nvc0_graph_channel(struct drm_device *dev)
+{
+ return NULL;
+}
+
+int
+nvc0_graph_create_context(struct nouveau_channel *chan)
+{
+ return 0;
+}
+
+void
+nvc0_graph_destroy_context(struct nouveau_channel *chan)
+{
+}
+
+int
+nvc0_graph_load_context(struct nouveau_channel *chan)
+{
+ return 0;
+}
+
+int
+nvc0_graph_unload_context(struct drm_device *dev)
+{
+ return 0;
+}
+
+void
+nvc0_graph_takedown(struct drm_device *dev)
+{
+}
+
+int
+nvc0_graph_init(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ dev_priv->engine.graph.accel_blocked = true;
+ return 0;
+}
+
--- /dev/null
+/*
+ * Copyright 2010 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs
+ */
+
+#include "drmP.h"
+
+#include "nouveau_drv.h"
+
+int
+nvc0_instmem_populate(struct drm_device *dev, struct nouveau_gpuobj *gpuobj,
+ uint32_t *size)
+{
+ int ret;
+
+ *size = ALIGN(*size, 4096);
+ if (*size == 0)
+ return -EINVAL;
+
+ ret = nouveau_bo_new(dev, NULL, *size, 0, TTM_PL_FLAG_VRAM, 0, 0x0000,
+ true, false, &gpuobj->im_backing);
+ if (ret) {
+ NV_ERROR(dev, "error getting PRAMIN backing pages: %d\n", ret);
+ return ret;
+ }
+
+ ret = nouveau_bo_pin(gpuobj->im_backing, TTM_PL_FLAG_VRAM);
+ if (ret) {
+ NV_ERROR(dev, "error pinning PRAMIN backing VRAM: %d\n", ret);
+ nouveau_bo_ref(NULL, &gpuobj->im_backing);
+ return ret;
+ }
+
+ gpuobj->im_backing_start = gpuobj->im_backing->bo.mem.mm_node->start;
+ gpuobj->im_backing_start <<= PAGE_SHIFT;
+ return 0;
+}
+
+void
+nvc0_instmem_clear(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ if (gpuobj && gpuobj->im_backing) {
+ if (gpuobj->im_bound)
+ dev_priv->engine.instmem.unbind(dev, gpuobj);
+ nouveau_bo_unpin(gpuobj->im_backing);
+ nouveau_bo_ref(NULL, &gpuobj->im_backing);
+ gpuobj->im_backing = NULL;
+ }
+}
+
+int
+nvc0_instmem_bind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t pte, pte_end;
+ uint64_t vram;
+
+ if (!gpuobj->im_backing || !gpuobj->im_pramin || gpuobj->im_bound)
+ return -EINVAL;
+
+ NV_DEBUG(dev, "st=0x%lx sz=0x%lx\n",
+ gpuobj->im_pramin->start, gpuobj->im_pramin->size);
+
+ pte = gpuobj->im_pramin->start >> 12;
+ pte_end = (gpuobj->im_pramin->size >> 12) + pte;
+ vram = gpuobj->im_backing_start;
+
+ NV_DEBUG(dev, "pramin=0x%lx, pte=%d, pte_end=%d\n",
+ gpuobj->im_pramin->start, pte, pte_end);
+ NV_DEBUG(dev, "first vram page: 0x%08x\n", gpuobj->im_backing_start);
+
+ while (pte < pte_end) {
+ nv_wr32(dev, 0x702000 + (pte * 8), (vram >> 8) | 1);
+ nv_wr32(dev, 0x702004 + (pte * 8), 0);
+ vram += 4096;
+ pte++;
+ }
+ dev_priv->engine.instmem.flush(dev);
+
+ if (1) {
+ u32 chan = nv_rd32(dev, 0x1700) << 16;
+ nv_wr32(dev, 0x100cb8, (chan + 0x1000) >> 8);
+ nv_wr32(dev, 0x100cbc, 0x80000005);
+ }
+
+ gpuobj->im_bound = 1;
+ return 0;
+}
+
+int
+nvc0_instmem_unbind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t pte, pte_end;
+
+ if (gpuobj->im_bound == 0)
+ return -EINVAL;
+
+ pte = gpuobj->im_pramin->start >> 12;
+ pte_end = (gpuobj->im_pramin->size >> 12) + pte;
+ while (pte < pte_end) {
+ nv_wr32(dev, 0x702000 + (pte * 8), 0);
+ nv_wr32(dev, 0x702004 + (pte * 8), 0);
+ pte++;
+ }
+ dev_priv->engine.instmem.flush(dev);
+
+ gpuobj->im_bound = 0;
+ return 0;
+}
+
+void
+nvc0_instmem_flush(struct drm_device *dev)
+{
+ nv_wr32(dev, 0x070000, 1);
+ if (!nv_wait(0x070000, 0x00000002, 0x00000000))
+ NV_ERROR(dev, "PRAMIN flush timeout\n");
+}
+
+int
+nvc0_instmem_suspend(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ int i;
+
+ dev_priv->susres.ramin_copy = vmalloc(65536);
+ if (!dev_priv->susres.ramin_copy)
+ return -ENOMEM;
+
+ for (i = 0x700000; i < 0x710000; i += 4)
+ dev_priv->susres.ramin_copy[i/4] = nv_rd32(dev, i);
+ return 0;
+}
+
+void
+nvc0_instmem_resume(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ u64 chan;
+ int i;
+
+ chan = dev_priv->vram_size - dev_priv->ramin_rsvd_vram;
+ nv_wr32(dev, 0x001700, chan >> 16);
+
+ for (i = 0x700000; i < 0x710000; i += 4)
+ nv_wr32(dev, i, dev_priv->susres.ramin_copy[i/4]);
+ vfree(dev_priv->susres.ramin_copy);
+ dev_priv->susres.ramin_copy = NULL;
+
+ nv_wr32(dev, 0x001714, 0xc0000000 | (chan >> 12));
+}
+
+int
+nvc0_instmem_init(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ u64 chan, pgt3, imem, lim3 = dev_priv->ramin_size - 1;
+ int ret, i;
+
+ dev_priv->ramin_rsvd_vram = 1 * 1024 * 1024;
+ chan = dev_priv->vram_size - dev_priv->ramin_rsvd_vram;
+ imem = 4096 + 4096 + 32768;
+
+ nv_wr32(dev, 0x001700, chan >> 16);
+
+ /* channel setup */
+ nv_wr32(dev, 0x700200, lower_32_bits(chan + 0x1000));
+ nv_wr32(dev, 0x700204, upper_32_bits(chan + 0x1000));
+ nv_wr32(dev, 0x700208, lower_32_bits(lim3));
+ nv_wr32(dev, 0x70020c, upper_32_bits(lim3));
+
+ /* point pgd -> pgt */
+ nv_wr32(dev, 0x701000, 0);
+ nv_wr32(dev, 0x701004, ((chan + 0x2000) >> 8) | 1);
+
+ /* point pgt -> physical vram for channel */
+ pgt3 = 0x2000;
+ for (i = 0; i < dev_priv->ramin_rsvd_vram; i += 4096, pgt3 += 8) {
+ nv_wr32(dev, 0x700000 + pgt3, ((chan + i) >> 8) | 1);
+ nv_wr32(dev, 0x700004 + pgt3, 0);
+ }
+
+ /* clear rest of pgt */
+ for (; i < dev_priv->ramin_size; i += 4096, pgt3 += 8) {
+ nv_wr32(dev, 0x700000 + pgt3, 0);
+ nv_wr32(dev, 0x700004 + pgt3, 0);
+ }
+
+ /* point bar3 at the channel */
+ nv_wr32(dev, 0x001714, 0xc0000000 | (chan >> 12));
+
+ /* Global PRAMIN heap */
+ ret = drm_mm_init(&dev_priv->ramin_heap, imem,
+ dev_priv->ramin_size - imem);
+ if (ret) {
+ NV_ERROR(dev, "Failed to init RAMIN heap\n");
+ return -ENOMEM;
+ }
+
+ /*XXX: incorrect, but needed to make hash func "work" */
+ dev_priv->ramht_offset = 0x10000;
+ dev_priv->ramht_bits = 9;
+ dev_priv->ramht_size = (1 << dev_priv->ramht_bits);
+ return 0;
+}
+
+void
+nvc0_instmem_takedown(struct drm_device *dev)
+{
+}
+
entry->pagelist[i], 0,
PAGE_SIZE,
PCI_DMA_BIDIRECTIONAL);
- if (entry->busaddr[i] == 0) {
+ if (pci_dma_mapping_error(dev->pdev, entry->busaddr[i])) {
DRM_ERROR("unable to map PCIGART pages!\n");
r600_page_table_cleanup(dev, gart_info);
goto done;
case V_038004_FMT_GB_GR:
case V_038004_FMT_BG_RG:
case V_038004_COLOR_INVALID:
+ default:
*bpe = 16;
return -EINVAL;
}
dev_warn(p->dev, "FMASK or CMASK buffer are not supported by this kernel\n");
return -EINVAL;
}
- size = radeon_bo_size(track->cb_color_bo[i]);
+ size = radeon_bo_size(track->cb_color_bo[i]) - track->cb_color_bo_offset[i];
if (r600_bpe_from_format(&bpe, G_0280A0_FORMAT(track->cb_color_info[i]))) {
dev_warn(p->dev, "%s:%d cb invalid format %d for %d (0x%08X)\n",
__func__, __LINE__, G_0280A0_FORMAT(track->cb_color_info[i]),
dev_warn(p->dev, "z/stencil buffer size not set\n");
return -EINVAL;
}
- printk_once(KERN_WARNING "You have old & broken userspace please consider updating mesa\n");
tmp = radeon_bo_size(track->db_bo) - track->db_offset;
tmp = (tmp / bpe) >> 6;
if (!tmp) {
return -EINVAL;
}
ib[idx] = track->cb_color_base_last[tmp];
- printk_once(KERN_WARNING "You have old & broken userspace "
- "please consider updating mesa & xf86-video-ati\n");
track->cb_color_frag_bo[tmp] = track->cb_color_bo[tmp];
} else {
r = r600_cs_packet_next_reloc(p, &reloc);
return -EINVAL;
}
ib[idx] = track->cb_color_base_last[tmp];
- printk_once(KERN_WARNING "You have old & broken userspace "
- "please consider updating mesa & xf86-video-ati\n");
track->cb_color_tile_bo[tmp] = track->cb_color_bo[tmp];
} else {
r = r600_cs_packet_next_reloc(p, &reloc);
return -EINVAL;
}
tmp = (reg - CB_COLOR0_BASE) / 4;
- track->cb_color_bo_offset[tmp] = radeon_get_ib_value(p, idx);
+ track->cb_color_bo_offset[tmp] = radeon_get_ib_value(p, idx) << 8;
ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
track->cb_color_base_last[tmp] = ib[idx];
track->cb_color_bo[tmp] = reloc->robj;
"0x%04X\n", reg);
return -EINVAL;
}
- track->db_offset = radeon_get_ib_value(p, idx);
+ track->db_offset = radeon_get_ib_value(p, idx) << 8;
ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
track->db_bo = reloc->robj;
break;
}
*l0_size = ALIGN((w0 * bpe), pitch_align) * h0 * d0;
*mipmap_size = offset;
- if (!blevel)
- *mipmap_size -= *l0_size;
if (!nlevels)
*mipmap_size = *l0_size;
+ if (!blevel)
+ *mipmap_size -= *l0_size;
}
/**
(pitch_align * bpe),
&l0_size, &mipmap_size);
/* using get ib will give us the offset into the texture bo */
- word0 = radeon_get_ib_value(p, idx + 2);
+ word0 = radeon_get_ib_value(p, idx + 2) << 8;
if ((l0_size + word0) > radeon_bo_size(texture)) {
dev_warn(p->dev, "texture bo too small (%d %d %d %d -> %d have %ld)\n",
w0, h0, bpe, word0, l0_size, radeon_bo_size(texture));
return -EINVAL;
}
/* using get ib will give us the offset into the mipmap bo */
- word0 = radeon_get_ib_value(p, idx + 3);
+ word0 = radeon_get_ib_value(p, idx + 3) << 8;
if ((mipmap_size + word0) > radeon_bo_size(mipmap)) {
dev_warn(p->dev, "mipmap bo too small (%d %d %d %d %d %d -> %d have %ld)\n",
w0, h0, bpe, blevel, nlevels, word0, mipmap_size, radeon_bo_size(texture));
}
for (i = 0; i < (pkt->count / 7); i++) {
struct radeon_bo *texture, *mipmap;
- u32 size, offset;
+ u32 size, offset, base_offset, mip_offset;
switch (G__SQ_VTX_CONSTANT_TYPE(radeon_get_ib_value(p, idx+(i*7)+6+1))) {
case SQ_TEX_VTX_VALID_TEXTURE:
DRM_ERROR("bad SET_RESOURCE\n");
return -EINVAL;
}
- ib[idx+1+(i*7)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ base_offset = (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
DRM_ERROR("bad SET_RESOURCE\n");
return -EINVAL;
}
- ib[idx+1+(i*7)+3] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ mip_offset = (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
mipmap = reloc->robj;
r = r600_check_texture_resource(p, idx+(i*7)+1,
texture, mipmap, reloc->lobj.tiling_flags);
if (r)
return r;
+ ib[idx+1+(i*7)+2] += base_offset;
+ ib[idx+1+(i*7)+3] += mip_offset;
break;
case SQ_TEX_VTX_VALID_BUFFER:
/* vtx base */
return -EINVAL;
}
offset = radeon_get_ib_value(p, idx+1+(i*7)+0);
- size = radeon_get_ib_value(p, idx+1+(i*7)+1);
+ size = radeon_get_ib_value(p, idx+1+(i*7)+1) + 1;
if (p->rdev && (size + offset) > radeon_bo_size(reloc->robj)) {
/* force size to size of the buffer */
- dev_warn(p->dev, "vbo resource seems too big for the bo\n");
+ dev_warn(p->dev, "vbo resource seems too big (%d) for the bo (%ld)\n",
+ size + offset, radeon_bo_size(reloc->robj));
ib[idx+1+(i*7)+1] = radeon_bo_size(reloc->robj);
}
ib[idx+1+(i*7)+0] += (u32)((reloc->lobj.gpu_offset) & 0xffffffff);
struct notifier_block acpi_nb;
/* only one userspace can use Hyperz features at a time */
struct drm_file *hyperz_filp;
+ /* i2c buses */
+ struct radeon_i2c_chan *i2c_bus[RADEON_MAX_I2C_BUS];
};
int radeon_device_init(struct radeon_device *rdev,
struct radeon_i2c_bus_rec *i2c_bus,
bool linkb, uint32_t igp_lane_info,
uint16_t connector_object_id,
- struct radeon_hpd *hpd);
+ struct radeon_hpd *hpd,
+ struct radeon_router *router);
/* from radeon_legacy_encoder.c */
extern void
i2c.i2c_id = gpio->sucI2cId.ucAccess;
- i2c.valid = true;
+ if (i2c.mask_clk_reg)
+ i2c.valid = true;
break;
}
}
return i2c;
}
+void radeon_atombios_i2c_init(struct radeon_device *rdev)
+{
+ struct atom_context *ctx = rdev->mode_info.atom_context;
+ ATOM_GPIO_I2C_ASSIGMENT *gpio;
+ struct radeon_i2c_bus_rec i2c;
+ int index = GetIndexIntoMasterTable(DATA, GPIO_I2C_Info);
+ struct _ATOM_GPIO_I2C_INFO *i2c_info;
+ uint16_t data_offset, size;
+ int i, num_indices;
+ char stmp[32];
+
+ memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec));
+
+ if (atom_parse_data_header(ctx, index, &size, NULL, NULL, &data_offset)) {
+ i2c_info = (struct _ATOM_GPIO_I2C_INFO *)(ctx->bios + data_offset);
+
+ num_indices = (size - sizeof(ATOM_COMMON_TABLE_HEADER)) /
+ sizeof(ATOM_GPIO_I2C_ASSIGMENT);
+
+ for (i = 0; i < num_indices; i++) {
+ gpio = &i2c_info->asGPIO_Info[i];
+ i2c.valid = false;
+ i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
+ i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
+ i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
+ i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4;
+ i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4;
+ i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4;
+ i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4;
+ i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4;
+ i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift);
+ i2c.mask_data_mask = (1 << gpio->ucDataMaskShift);
+ i2c.en_clk_mask = (1 << gpio->ucClkEnShift);
+ i2c.en_data_mask = (1 << gpio->ucDataEnShift);
+ i2c.y_clk_mask = (1 << gpio->ucClkY_Shift);
+ i2c.y_data_mask = (1 << gpio->ucDataY_Shift);
+ i2c.a_clk_mask = (1 << gpio->ucClkA_Shift);
+ i2c.a_data_mask = (1 << gpio->ucDataA_Shift);
+
+ if (gpio->sucI2cId.sbfAccess.bfHW_Capable)
+ i2c.hw_capable = true;
+ else
+ i2c.hw_capable = false;
+
+ if (gpio->sucI2cId.ucAccess == 0xa0)
+ i2c.mm_i2c = true;
+ else
+ i2c.mm_i2c = false;
+
+ i2c.i2c_id = gpio->sucI2cId.ucAccess;
+
+ if (i2c.mask_clk_reg) {
+ i2c.valid = true;
+ sprintf(stmp, "0x%x", i2c.i2c_id);
+ rdev->i2c_bus[i] = radeon_i2c_create(rdev->ddev, &i2c, stmp);
+ }
+ }
+ }
+}
+
static inline struct radeon_gpio_rec radeon_lookup_gpio(struct radeon_device *rdev,
u8 id)
{
uint16_t *line_mux,
struct radeon_hpd *hpd)
{
+ struct radeon_device *rdev = dev->dev_private;
/* Asus M2A-VM HDMI board lists the DVI port as HDMI */
if ((dev->pdev->device == 0x791e) &&
}
}
- /* Acer laptop reports DVI-D as DVI-I */
+ /* Acer laptop reports DVI-D as DVI-I and hpd pins reversed */
if ((dev->pdev->device == 0x95c4) &&
(dev->pdev->subsystem_vendor == 0x1025) &&
(dev->pdev->subsystem_device == 0x013c)) {
+ struct radeon_gpio_rec gpio;
+
if ((*connector_type == DRM_MODE_CONNECTOR_DVII) &&
- (supported_device == ATOM_DEVICE_DFP1_SUPPORT))
+ (supported_device == ATOM_DEVICE_DFP1_SUPPORT)) {
+ gpio = radeon_lookup_gpio(rdev, 6);
+ *hpd = radeon_atom_get_hpd_info_from_gpio(rdev, &gpio);
*connector_type = DRM_MODE_CONNECTOR_DVID;
+ } else if ((*connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
+ (supported_device == ATOM_DEVICE_DFP1_SUPPORT)) {
+ gpio = radeon_lookup_gpio(rdev, 7);
+ *hpd = radeon_atom_get_hpd_info_from_gpio(rdev, &gpio);
+ }
}
/* XFX Pine Group device rv730 reports no VGA DDC lines
u16 size, data_offset;
u8 frev, crev;
ATOM_CONNECTOR_OBJECT_TABLE *con_obj;
+ ATOM_OBJECT_TABLE *router_obj;
ATOM_DISPLAY_OBJECT_PATH_TABLE *path_obj;
ATOM_OBJECT_HEADER *obj_header;
- int i, j, path_size, device_support;
+ int i, j, k, path_size, device_support;
int connector_type;
u16 igp_lane_info, conn_id, connector_object_id;
bool linkb;
struct radeon_i2c_bus_rec ddc_bus;
+ struct radeon_router router;
struct radeon_gpio_rec gpio;
struct radeon_hpd hpd;
if (crev < 2)
return false;
+ router.valid = false;
+
obj_header = (ATOM_OBJECT_HEADER *) (ctx->bios + data_offset);
path_obj = (ATOM_DISPLAY_OBJECT_PATH_TABLE *)
(ctx->bios + data_offset +
con_obj = (ATOM_CONNECTOR_OBJECT_TABLE *)
(ctx->bios + data_offset +
le16_to_cpu(obj_header->usConnectorObjectTableOffset));
+ router_obj = (ATOM_OBJECT_TABLE *)
+ (ctx->bios + data_offset +
+ le16_to_cpu(obj_header->usRouterObjectTableOffset));
device_support = le16_to_cpu(obj_header->usDeviceSupport);
path_size = 0;
if (connector_type == DRM_MODE_CONNECTOR_Unknown)
continue;
- for (j = 0; j < ((le16_to_cpu(path->usSize) - 8) / 2);
- j++) {
- uint8_t enc_obj_id, enc_obj_num, enc_obj_type;
+ for (j = 0; j < ((le16_to_cpu(path->usSize) - 8) / 2); j++) {
+ uint8_t grph_obj_id, grph_obj_num, grph_obj_type;
- enc_obj_id =
+ grph_obj_id =
(le16_to_cpu(path->usGraphicObjIds[j]) &
OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
- enc_obj_num =
+ grph_obj_num =
(le16_to_cpu(path->usGraphicObjIds[j]) &
ENUM_ID_MASK) >> ENUM_ID_SHIFT;
- enc_obj_type =
+ grph_obj_type =
(le16_to_cpu(path->usGraphicObjIds[j]) &
OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT;
- /* FIXME: add support for router objects */
- if (enc_obj_type == GRAPH_OBJECT_TYPE_ENCODER) {
- if (enc_obj_num == 2)
+ if (grph_obj_type == GRAPH_OBJECT_TYPE_ENCODER) {
+ if (grph_obj_num == 2)
linkb = true;
else
linkb = false;
radeon_add_atom_encoder(dev,
- enc_obj_id,
+ grph_obj_id,
le16_to_cpu
(path->
usDeviceTag));
+ } else if (grph_obj_type == GRAPH_OBJECT_TYPE_ROUTER) {
+ router.valid = false;
+ for (k = 0; k < router_obj->ucNumberOfObjects; k++) {
+ u16 router_obj_id = le16_to_cpu(router_obj->asObjects[j].usObjectID);
+ if (le16_to_cpu(path->usGraphicObjIds[j]) == router_obj_id) {
+ ATOM_COMMON_RECORD_HEADER *record = (ATOM_COMMON_RECORD_HEADER *)
+ (ctx->bios + data_offset +
+ le16_to_cpu(router_obj->asObjects[k].usRecordOffset));
+ ATOM_I2C_RECORD *i2c_record;
+ ATOM_I2C_ID_CONFIG_ACCESS *i2c_config;
+ ATOM_ROUTER_DDC_PATH_SELECT_RECORD *ddc_path;
+ ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *router_src_dst_table =
+ (ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *)
+ (ctx->bios + data_offset +
+ le16_to_cpu(router_obj->asObjects[k].usSrcDstTableOffset));
+ int enum_id;
+
+ router.router_id = router_obj_id;
+ for (enum_id = 0; enum_id < router_src_dst_table->ucNumberOfDst;
+ enum_id++) {
+ if (le16_to_cpu(path->usConnObjectId) ==
+ le16_to_cpu(router_src_dst_table->usDstObjectID[enum_id]))
+ break;
+ }
+
+ while (record->ucRecordType > 0 &&
+ record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) {
+ switch (record->ucRecordType) {
+ case ATOM_I2C_RECORD_TYPE:
+ i2c_record =
+ (ATOM_I2C_RECORD *)
+ record;
+ i2c_config =
+ (ATOM_I2C_ID_CONFIG_ACCESS *)
+ &i2c_record->sucI2cId;
+ router.i2c_info =
+ radeon_lookup_i2c_gpio(rdev,
+ i2c_config->
+ ucAccess);
+ router.i2c_addr = i2c_record->ucI2CAddr >> 1;
+ break;
+ case ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE:
+ ddc_path = (ATOM_ROUTER_DDC_PATH_SELECT_RECORD *)
+ record;
+ router.valid = true;
+ router.mux_type = ddc_path->ucMuxType;
+ router.mux_control_pin = ddc_path->ucMuxControlPin;
+ router.mux_state = ddc_path->ucMuxState[enum_id];
+ break;
+ }
+ record = (ATOM_COMMON_RECORD_HEADER *)
+ ((char *)record + record->ucRecordSize);
+ }
+ }
+ }
}
}
connector_type, &ddc_bus,
linkb, igp_lane_info,
connector_object_id,
- &hpd);
+ &hpd,
+ &router);
}
}
int i, j, max_device;
struct bios_connector *bios_connectors;
size_t bc_size = sizeof(*bios_connectors) * ATOM_MAX_SUPPORTED_DEVICE;
+ struct radeon_router router;
+
+ router.valid = false;
bios_connectors = kzalloc(bc_size, GFP_KERNEL);
if (!bios_connectors)
&bios_connectors[i].ddc_bus,
false, 0,
connector_object_id,
- &bios_connectors[i].hpd);
+ &bios_connectors[i].hpd,
+ &router);
}
}
thermal_controller_names[power_info->info.ucOverdriveThermalController],
power_info->info.ucOverdriveControllerAddress >> 1);
i2c_bus = radeon_lookup_i2c_gpio(rdev, power_info->info.ucOverdriveI2cLine);
- rdev->pm.i2c_bus = radeon_i2c_create(rdev->ddev, &i2c_bus, "Thermal");
+ rdev->pm.i2c_bus = radeon_i2c_lookup(rdev, &i2c_bus);
if (rdev->pm.i2c_bus) {
struct i2c_board_info info = { };
const char *name = thermal_controller_names[power_info->info.
(controller->ucFanParameters &
ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
i2c_bus = radeon_lookup_i2c_gpio(rdev, controller->ucI2cLine);
- rdev->pm.i2c_bus = radeon_i2c_create(rdev->ddev, &i2c_bus, "Thermal");
+ rdev->pm.i2c_bus = radeon_i2c_lookup(rdev, &i2c_bus);
if (rdev->pm.i2c_bus) {
struct i2c_board_info info = { };
const char *name = pp_lib_thermal_controller_names[controller->ucType];
rdev->pm.power_state[state_index].type =
POWER_STATE_TYPE_PERFORMANCE;
break;
+ case ATOM_PPLIB_CLASSIFICATION_UI_NONE:
+ if (misc2 & ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE)
+ rdev->pm.power_state[state_index].type =
+ POWER_STATE_TYPE_PERFORMANCE;
+ break;
}
rdev->pm.power_state[state_index].flags = 0;
if (misc & ATOM_PPLIB_SINGLE_DISPLAY_ONLY)
return mclk;
}
+#ifdef CONFIG_OF
+/*
+ * Read XTAL (ref clock), SCLK and MCLK from Open Firmware device
+ * tree. Hopefully, ATI OF driver is kind enough to fill these
+ */
+static bool __devinit radeon_read_clocks_OF(struct drm_device *dev)
+{
+ struct radeon_device *rdev = dev->dev_private;
+ struct device_node *dp = rdev->pdev->dev.of_node;
+ const u32 *val;
+ struct radeon_pll *p1pll = &rdev->clock.p1pll;
+ struct radeon_pll *p2pll = &rdev->clock.p2pll;
+ struct radeon_pll *spll = &rdev->clock.spll;
+ struct radeon_pll *mpll = &rdev->clock.mpll;
+
+ if (dp == NULL)
+ return false;
+ val = of_get_property(dp, "ATY,RefCLK", NULL);
+ if (!val || !*val) {
+ printk(KERN_WARNING "radeonfb: No ATY,RefCLK property !\n");
+ return false;
+ }
+ p1pll->reference_freq = p2pll->reference_freq = (*val) / 10;
+ p1pll->reference_div = RREG32_PLL(RADEON_PPLL_REF_DIV) & 0x3ff;
+ if (p1pll->reference_div < 2)
+ p1pll->reference_div = 12;
+ p2pll->reference_div = p1pll->reference_div;
+
+ /* These aren't in the device-tree */
+ if (rdev->family >= CHIP_R420) {
+ p1pll->pll_in_min = 100;
+ p1pll->pll_in_max = 1350;
+ p1pll->pll_out_min = 20000;
+ p1pll->pll_out_max = 50000;
+ p2pll->pll_in_min = 100;
+ p2pll->pll_in_max = 1350;
+ p2pll->pll_out_min = 20000;
+ p2pll->pll_out_max = 50000;
+ } else {
+ p1pll->pll_in_min = 40;
+ p1pll->pll_in_max = 500;
+ p1pll->pll_out_min = 12500;
+ p1pll->pll_out_max = 35000;
+ p2pll->pll_in_min = 40;
+ p2pll->pll_in_max = 500;
+ p2pll->pll_out_min = 12500;
+ p2pll->pll_out_max = 35000;
+ }
+
+ spll->reference_freq = mpll->reference_freq = p1pll->reference_freq;
+ spll->reference_div = mpll->reference_div =
+ RREG32_PLL(RADEON_M_SPLL_REF_FB_DIV) &
+ RADEON_M_SPLL_REF_DIV_MASK;
+
+ val = of_get_property(dp, "ATY,SCLK", NULL);
+ if (val && *val)
+ rdev->clock.default_sclk = (*val) / 10;
+ else
+ rdev->clock.default_sclk =
+ radeon_legacy_get_engine_clock(rdev);
+
+ val = of_get_property(dp, "ATY,MCLK", NULL);
+ if (val && *val)
+ rdev->clock.default_mclk = (*val) / 10;
+ else
+ rdev->clock.default_mclk =
+ radeon_legacy_get_memory_clock(rdev);
+
+ DRM_INFO("Using device-tree clock info\n");
+
+ return true;
+}
+#else
+static bool __devinit radeon_read_clocks_OF(struct drm_device *dev)
+{
+ return false;
+}
+#endif /* CONFIG_OF */
+
void radeon_get_clock_info(struct drm_device *dev)
{
struct radeon_device *rdev = dev->dev_private;
ret = radeon_atom_get_clock_info(dev);
else
ret = radeon_combios_get_clock_info(dev);
+ if (!ret)
+ ret = radeon_read_clocks_OF(dev);
if (ret) {
if (p1pll->reference_div < 2) {
}
static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rdev,
- int ddc_line)
+ enum radeon_combios_ddc ddc,
+ u32 clk_mask,
+ u32 data_mask)
{
struct radeon_i2c_bus_rec i2c;
+ int ddc_line = 0;
+
+ /* ddc id = mask reg
+ * DDC_NONE_DETECTED = none
+ * DDC_DVI = RADEON_GPIO_DVI_DDC
+ * DDC_VGA = RADEON_GPIO_VGA_DDC
+ * DDC_LCD = RADEON_GPIOPAD_MASK
+ * DDC_GPIO = RADEON_MDGPIO_MASK
+ * r1xx/r2xx
+ * DDC_MONID = RADEON_GPIO_MONID
+ * DDC_CRT2 = RADEON_GPIO_CRT2_DDC
+ * r3xx
+ * DDC_MONID = RADEON_GPIO_MONID
+ * DDC_CRT2 = RADEON_GPIO_DVI_DDC
+ * rs3xx/rs4xx
+ * DDC_MONID = RADEON_GPIOPAD_MASK
+ * DDC_CRT2 = RADEON_GPIO_MONID
+ */
+ switch (ddc) {
+ case DDC_NONE_DETECTED:
+ default:
+ ddc_line = 0;
+ break;
+ case DDC_DVI:
+ ddc_line = RADEON_GPIO_DVI_DDC;
+ break;
+ case DDC_VGA:
+ ddc_line = RADEON_GPIO_VGA_DDC;
+ break;
+ case DDC_LCD:
+ ddc_line = RADEON_GPIOPAD_MASK;
+ break;
+ case DDC_GPIO:
+ ddc_line = RADEON_MDGPIO_MASK;
+ break;
+ case DDC_MONID:
+ if (rdev->family == CHIP_RS300 ||
+ rdev->family == CHIP_RS400 ||
+ rdev->family == CHIP_RS480)
+ ddc_line = RADEON_GPIOPAD_MASK;
+ else
+ ddc_line = RADEON_GPIO_MONID;
+ break;
+ case DDC_CRT2:
+ if (rdev->family == CHIP_RS300 ||
+ rdev->family == CHIP_RS400 ||
+ rdev->family == CHIP_RS480)
+ ddc_line = RADEON_GPIO_MONID;
+ else if (rdev->family >= CHIP_R300) {
+ ddc_line = RADEON_GPIO_DVI_DDC;
+ ddc = DDC_DVI;
+ } else
+ ddc_line = RADEON_GPIO_CRT2_DDC;
+ break;
+ }
if (ddc_line == RADEON_GPIOPAD_MASK) {
i2c.mask_clk_reg = RADEON_GPIOPAD_MASK;
i2c.y_clk_reg = RADEON_MDGPIO_Y;
i2c.y_data_reg = RADEON_MDGPIO_Y;
} else {
- i2c.mask_clk_mask = RADEON_GPIO_EN_1;
- i2c.mask_data_mask = RADEON_GPIO_EN_0;
- i2c.a_clk_mask = RADEON_GPIO_A_1;
- i2c.a_data_mask = RADEON_GPIO_A_0;
- i2c.en_clk_mask = RADEON_GPIO_EN_1;
- i2c.en_data_mask = RADEON_GPIO_EN_0;
- i2c.y_clk_mask = RADEON_GPIO_Y_1;
- i2c.y_data_mask = RADEON_GPIO_Y_0;
-
i2c.mask_clk_reg = ddc_line;
i2c.mask_data_reg = ddc_line;
i2c.a_clk_reg = ddc_line;
i2c.y_data_reg = ddc_line;
}
+ if (clk_mask && data_mask) {
+ i2c.mask_clk_mask = clk_mask;
+ i2c.mask_data_mask = data_mask;
+ i2c.a_clk_mask = clk_mask;
+ i2c.a_data_mask = data_mask;
+ i2c.en_clk_mask = clk_mask;
+ i2c.en_data_mask = data_mask;
+ i2c.y_clk_mask = clk_mask;
+ i2c.y_data_mask = data_mask;
+ } else {
+ i2c.mask_clk_mask = RADEON_GPIO_EN_1;
+ i2c.mask_data_mask = RADEON_GPIO_EN_0;
+ i2c.a_clk_mask = RADEON_GPIO_A_1;
+ i2c.a_data_mask = RADEON_GPIO_A_0;
+ i2c.en_clk_mask = RADEON_GPIO_EN_1;
+ i2c.en_data_mask = RADEON_GPIO_EN_0;
+ i2c.y_clk_mask = RADEON_GPIO_Y_1;
+ i2c.y_data_mask = RADEON_GPIO_Y_0;
+ }
+
switch (rdev->family) {
case CHIP_R100:
case CHIP_RV100:
break;
}
i2c.mm_i2c = false;
- i2c.i2c_id = 0;
+
+ i2c.i2c_id = ddc;
i2c.hpd = RADEON_HPD_NONE;
if (ddc_line)
return i2c;
}
+void radeon_combios_i2c_init(struct radeon_device *rdev)
+{
+ struct drm_device *dev = rdev->ddev;
+ struct radeon_i2c_bus_rec i2c;
+
+
+ i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
+ rdev->i2c_bus[0] = radeon_i2c_create(dev, &i2c, "DVI_DDC");
+
+ i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
+ rdev->i2c_bus[1] = radeon_i2c_create(dev, &i2c, "VGA_DDC");
+
+ i2c.valid = true;
+ i2c.hw_capable = true;
+ i2c.mm_i2c = true;
+ i2c.i2c_id = 0xa0;
+ rdev->i2c_bus[2] = radeon_i2c_create(dev, &i2c, "MM_I2C");
+
+ if (rdev->family == CHIP_RS300 ||
+ rdev->family == CHIP_RS400 ||
+ rdev->family == CHIP_RS480) {
+ u16 offset;
+ u8 id, blocks, clk, data;
+ int i;
+
+ i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
+ rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
+
+ offset = combios_get_table_offset(dev, COMBIOS_I2C_INFO_TABLE);
+ if (offset) {
+ blocks = RBIOS8(offset + 2);
+ for (i = 0; i < blocks; i++) {
+ id = RBIOS8(offset + 3 + (i * 5) + 0);
+ if (id == 136) {
+ clk = RBIOS8(offset + 3 + (i * 5) + 3);
+ data = RBIOS8(offset + 3 + (i * 5) + 4);
+ i2c = combios_setup_i2c_bus(rdev, DDC_MONID,
+ clk, data);
+ rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK");
+ break;
+ }
+ }
+ }
+
+ } else if (rdev->family >= CHIP_R300) {
+ i2c = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
+ rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
+ } else {
+ i2c = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
+ rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
+
+ i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
+ rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "CRT2_DDC");
+ }
+}
+
bool radeon_combios_get_clock_info(struct drm_device *dev)
{
struct radeon_device *rdev = dev->dev_private;
struct radeon_i2c_bus_rec i2c_bus;
/* default for macs */
- i2c_bus = combios_setup_i2c_bus(rdev, RADEON_GPIO_MONID);
- tmds->i2c_bus = radeon_i2c_create(dev, &i2c_bus, "DVO");
+ i2c_bus = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
+ tmds->i2c_bus = radeon_i2c_lookup(rdev, &i2c_bus);
/* XXX some macs have duallink chips */
switch (rdev->mode_info.connector_table) {
struct drm_device *dev = encoder->base.dev;
struct radeon_device *rdev = dev->dev_private;
uint16_t offset;
- uint8_t ver, id, blocks, clk, data;
- int i;
+ uint8_t ver;
enum radeon_combios_ddc gpio;
struct radeon_i2c_bus_rec i2c_bus;
tmds->i2c_bus = NULL;
if (rdev->flags & RADEON_IS_IGP) {
- offset = combios_get_table_offset(dev, COMBIOS_I2C_INFO_TABLE);
- if (offset) {
- ver = RBIOS8(offset);
- DRM_INFO("GPIO Table revision: %d\n", ver);
- blocks = RBIOS8(offset + 2);
- for (i = 0; i < blocks; i++) {
- id = RBIOS8(offset + 3 + (i * 5) + 0);
- if (id == 136) {
- clk = RBIOS8(offset + 3 + (i * 5) + 3);
- data = RBIOS8(offset + 3 + (i * 5) + 4);
- i2c_bus.valid = true;
- i2c_bus.mask_clk_mask = (1 << clk);
- i2c_bus.mask_data_mask = (1 << data);
- i2c_bus.a_clk_mask = (1 << clk);
- i2c_bus.a_data_mask = (1 << data);
- i2c_bus.en_clk_mask = (1 << clk);
- i2c_bus.en_data_mask = (1 << data);
- i2c_bus.y_clk_mask = (1 << clk);
- i2c_bus.y_data_mask = (1 << data);
- i2c_bus.mask_clk_reg = RADEON_GPIOPAD_MASK;
- i2c_bus.mask_data_reg = RADEON_GPIOPAD_MASK;
- i2c_bus.a_clk_reg = RADEON_GPIOPAD_A;
- i2c_bus.a_data_reg = RADEON_GPIOPAD_A;
- i2c_bus.en_clk_reg = RADEON_GPIOPAD_EN;
- i2c_bus.en_data_reg = RADEON_GPIOPAD_EN;
- i2c_bus.y_clk_reg = RADEON_GPIOPAD_Y;
- i2c_bus.y_data_reg = RADEON_GPIOPAD_Y;
- tmds->i2c_bus = radeon_i2c_create(dev, &i2c_bus, "DVO");
- tmds->dvo_chip = DVO_SIL164;
- tmds->slave_addr = 0x70 >> 1; /* 7 bit addressing */
- break;
- }
- }
- }
+ i2c_bus = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
+ tmds->i2c_bus = radeon_i2c_lookup(rdev, &i2c_bus);
+ tmds->dvo_chip = DVO_SIL164;
+ tmds->slave_addr = 0x70 >> 1; /* 7 bit addressing */
} else {
offset = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE);
if (offset) {
tmds->slave_addr = RBIOS8(offset + 4 + 2);
tmds->slave_addr >>= 1; /* 7 bit addressing */
gpio = RBIOS8(offset + 4 + 3);
- switch (gpio) {
- case DDC_MONID:
- i2c_bus = combios_setup_i2c_bus(rdev, RADEON_GPIO_MONID);
- tmds->i2c_bus = radeon_i2c_create(dev, &i2c_bus, "DVO");
- break;
- case DDC_DVI:
- i2c_bus = combios_setup_i2c_bus(rdev, RADEON_GPIO_DVI_DDC);
- tmds->i2c_bus = radeon_i2c_create(dev, &i2c_bus, "DVO");
- break;
- case DDC_VGA:
- i2c_bus = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
- tmds->i2c_bus = radeon_i2c_create(dev, &i2c_bus, "DVO");
- break;
- case DDC_CRT2:
- /* R3xx+ chips don't have GPIO_CRT2_DDC gpio pad */
- if (rdev->family >= CHIP_R300)
- i2c_bus = combios_setup_i2c_bus(rdev, RADEON_GPIO_MONID);
- else
- i2c_bus = combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
- tmds->i2c_bus = radeon_i2c_create(dev, &i2c_bus, "DVO");
- break;
- case DDC_LCD: /* MM i2c */
+ if (gpio == DDC_LCD) {
+ /* MM i2c */
i2c_bus.valid = true;
i2c_bus.hw_capable = true;
i2c_bus.mm_i2c = true;
- tmds->i2c_bus = radeon_i2c_create(dev, &i2c_bus, "DVO");
- break;
- default:
- DRM_ERROR("Unsupported gpio %d\n", gpio);
- break;
- }
+ i2c_bus.i2c_id = 0xa0;
+ } else
+ i2c_bus = combios_setup_i2c_bus(rdev, gpio, 0, 0);
+ tmds->i2c_bus = radeon_i2c_lookup(rdev, &i2c_bus);
}
}
/* these are the most common settings */
if (rdev->flags & RADEON_SINGLE_CRTC) {
/* VGA - primary dac */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
&hpd);
} else if (rdev->flags & RADEON_IS_MOBILITY) {
/* LVDS */
- ddc_i2c = combios_setup_i2c_bus(rdev, 0);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_NONE_DETECTED, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
&hpd);
/* VGA - primary dac */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
&hpd);
} else {
/* DVI-I - tv dac, int tmds */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_DVI_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
hpd.hpd = RADEON_HPD_1;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
&hpd);
/* VGA - primary dac */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
DRM_INFO("Connector Table: %d (ibook)\n",
rdev->mode_info.connector_table);
/* LVDS */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_DVI_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
CONNECTOR_OBJECT_ID_LVDS,
&hpd);
/* VGA - TV DAC */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
DRM_INFO("Connector Table: %d (powerbook external tmds)\n",
rdev->mode_info.connector_table);
/* LVDS */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_DVI_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
CONNECTOR_OBJECT_ID_LVDS,
&hpd);
/* DVI-I - primary dac, ext tmds */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
hpd.hpd = RADEON_HPD_2; /* ??? */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
DRM_INFO("Connector Table: %d (powerbook internal tmds)\n",
rdev->mode_info.connector_table);
/* LVDS */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_DVI_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
CONNECTOR_OBJECT_ID_LVDS,
&hpd);
/* DVI-I - primary dac, int tmds */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
hpd.hpd = RADEON_HPD_1; /* ??? */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
DRM_INFO("Connector Table: %d (powerbook vga)\n",
rdev->mode_info.connector_table);
/* LVDS */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_DVI_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
CONNECTOR_OBJECT_ID_LVDS,
&hpd);
/* VGA - primary dac */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
DRM_INFO("Connector Table: %d (mini external tmds)\n",
rdev->mode_info.connector_table);
/* DVI-I - tv dac, ext tmds */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
hpd.hpd = RADEON_HPD_2; /* ??? */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
DRM_INFO("Connector Table: %d (mini internal tmds)\n",
rdev->mode_info.connector_table);
/* DVI-I - tv dac, int tmds */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
hpd.hpd = RADEON_HPD_1; /* ??? */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
DRM_INFO("Connector Table: %d (imac g5 isight)\n",
rdev->mode_info.connector_table);
/* DVI-D - int tmds */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_MONID);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
hpd.hpd = RADEON_HPD_1; /* ??? */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D,
&hpd);
/* VGA - tv dac */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_DVI_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
DRM_INFO("Connector Table: %d (emac)\n",
rdev->mode_info.connector_table);
/* VGA - primary dac */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
CONNECTOR_OBJECT_ID_VGA,
&hpd);
/* VGA - tv dac */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
DRM_INFO("Connector Table: %d (rn50-power)\n",
rdev->mode_info.connector_table);
/* VGA - primary dac */
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
CONNECTOR_OBJECT_ID_VGA,
&hpd);
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
struct radeon_i2c_bus_rec *ddc_i2c,
struct radeon_hpd *hpd)
{
- struct radeon_device *rdev = dev->dev_private;
-
- /* XPRESS DDC quirks */
- if ((rdev->family == CHIP_RS400 ||
- rdev->family == CHIP_RS480) &&
- ddc_i2c->mask_clk_reg == RADEON_GPIO_CRT2_DDC)
- *ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_MONID);
- else if ((rdev->family == CHIP_RS400 ||
- rdev->family == CHIP_RS480) &&
- ddc_i2c->mask_clk_reg == RADEON_GPIO_MONID) {
- *ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIOPAD_MASK);
- ddc_i2c->mask_clk_mask = (0x20 << 8);
- ddc_i2c->mask_data_mask = 0x80;
- ddc_i2c->a_clk_mask = (0x20 << 8);
- ddc_i2c->a_data_mask = 0x80;
- ddc_i2c->en_clk_mask = (0x20 << 8);
- ddc_i2c->en_data_mask = 0x80;
- ddc_i2c->y_clk_mask = (0x20 << 8);
- ddc_i2c->y_data_mask = 0x80;
- }
-
- /* R3xx+ chips don't have GPIO_CRT2_DDC gpio pad */
- if ((rdev->family >= CHIP_R300) &&
- ddc_i2c->mask_clk_reg == RADEON_GPIO_CRT2_DDC)
- *ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_DVI_DDC);
/* Certain IBM chipset RN50s have a BIOS reporting two VGAs,
one with VGA DDC and one with CRT2 DDC. - kill the CRT2 DDC one */
connector = (tmp >> 12) & 0xf;
ddc_type = (tmp >> 8) & 0xf;
- switch (ddc_type) {
- case DDC_MONID:
- ddc_i2c =
- combios_setup_i2c_bus(rdev, RADEON_GPIO_MONID);
- break;
- case DDC_DVI:
- ddc_i2c =
- combios_setup_i2c_bus(rdev, RADEON_GPIO_DVI_DDC);
- break;
- case DDC_VGA:
- ddc_i2c =
- combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
- break;
- case DDC_CRT2:
- ddc_i2c =
- combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
- break;
- default:
- ddc_i2c.valid = false;
- break;
- }
+ ddc_i2c = combios_setup_i2c_bus(rdev, ddc_type, 0, 0);
switch (connector) {
case CONNECTOR_PROPRIETARY_LEGACY:
0),
ATOM_DEVICE_DFP1_SUPPORT);
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_DVI_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
hpd.hpd = RADEON_HPD_1;
radeon_add_legacy_connector(dev,
0,
ATOM_DEVICE_CRT1_SUPPORT,
1),
ATOM_DEVICE_CRT1_SUPPORT);
- ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
hpd.hpd = RADEON_HPD_NONE;
radeon_add_legacy_connector(dev,
0,
if (lcd_ddc_info) {
ddc_type = RBIOS8(lcd_ddc_info + 2);
switch (ddc_type) {
- case DDC_MONID:
- ddc_i2c =
- combios_setup_i2c_bus
- (rdev, RADEON_GPIO_MONID);
- break;
- case DDC_DVI:
- ddc_i2c =
- combios_setup_i2c_bus
- (rdev, RADEON_GPIO_DVI_DDC);
- break;
- case DDC_VGA:
- ddc_i2c =
- combios_setup_i2c_bus
- (rdev, RADEON_GPIO_VGA_DDC);
- break;
- case DDC_CRT2:
- ddc_i2c =
- combios_setup_i2c_bus
- (rdev, RADEON_GPIO_CRT2_DDC);
- break;
case DDC_LCD:
ddc_i2c =
- combios_setup_i2c_bus
- (rdev, RADEON_GPIOPAD_MASK);
- ddc_i2c.mask_clk_mask =
- RBIOS32(lcd_ddc_info + 3);
- ddc_i2c.mask_data_mask =
- RBIOS32(lcd_ddc_info + 7);
- ddc_i2c.a_clk_mask =
- RBIOS32(lcd_ddc_info + 3);
- ddc_i2c.a_data_mask =
- RBIOS32(lcd_ddc_info + 7);
- ddc_i2c.en_clk_mask =
- RBIOS32(lcd_ddc_info + 3);
- ddc_i2c.en_data_mask =
- RBIOS32(lcd_ddc_info + 7);
- ddc_i2c.y_clk_mask =
- RBIOS32(lcd_ddc_info + 3);
- ddc_i2c.y_data_mask =
- RBIOS32(lcd_ddc_info + 7);
+ combios_setup_i2c_bus(rdev,
+ DDC_LCD,
+ RBIOS32(lcd_ddc_info + 3),
+ RBIOS32(lcd_ddc_info + 7));
+ radeon_i2c_add(rdev, &ddc_i2c, "LCD");
break;
case DDC_GPIO:
ddc_i2c =
- combios_setup_i2c_bus
- (rdev, RADEON_MDGPIO_MASK);
- ddc_i2c.mask_clk_mask =
- RBIOS32(lcd_ddc_info + 3);
- ddc_i2c.mask_data_mask =
- RBIOS32(lcd_ddc_info + 7);
- ddc_i2c.a_clk_mask =
- RBIOS32(lcd_ddc_info + 3);
- ddc_i2c.a_data_mask =
- RBIOS32(lcd_ddc_info + 7);
- ddc_i2c.en_clk_mask =
- RBIOS32(lcd_ddc_info + 3);
- ddc_i2c.en_data_mask =
- RBIOS32(lcd_ddc_info + 7);
- ddc_i2c.y_clk_mask =
- RBIOS32(lcd_ddc_info + 3);
- ddc_i2c.y_data_mask =
- RBIOS32(lcd_ddc_info + 7);
+ combios_setup_i2c_bus(rdev,
+ DDC_GPIO,
+ RBIOS32(lcd_ddc_info + 3),
+ RBIOS32(lcd_ddc_info + 7));
+ radeon_i2c_add(rdev, &ddc_i2c, "LCD");
break;
default:
- ddc_i2c.valid = false;
+ ddc_i2c =
+ combios_setup_i2c_bus(rdev, ddc_type, 0, 0);
break;
}
DRM_DEBUG_KMS("LCD DDC Info Table found!\n");
{
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
- if (radeon_connector->ddc_bus)
- radeon_i2c_destroy(radeon_connector->ddc_bus);
if (radeon_connector->edid)
kfree(radeon_connector->edid);
kfree(radeon_connector->con_priv);
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
struct radeon_connector_atom_dig *radeon_dig_connector = radeon_connector->con_priv;
- if (radeon_connector->ddc_bus)
- radeon_i2c_destroy(radeon_connector->ddc_bus);
if (radeon_connector->edid)
kfree(radeon_connector->edid);
if (radeon_dig_connector->dp_i2c_bus)
bool linkb,
uint32_t igp_lane_info,
uint16_t connector_object_id,
- struct radeon_hpd *hpd)
+ struct radeon_hpd *hpd,
+ struct radeon_router *router)
{
struct radeon_device *rdev = dev->dev_private;
struct drm_connector *connector;
radeon_connector->shared_ddc = true;
shared_ddc = true;
}
+ if (radeon_connector->router_bus && router->valid &&
+ (radeon_connector->router.router_id == router->router_id)) {
+ radeon_connector->shared_ddc = false;
+ shared_ddc = false;
+ }
}
}
radeon_connector->shared_ddc = shared_ddc;
radeon_connector->connector_object_id = connector_object_id;
radeon_connector->hpd = *hpd;
+ radeon_connector->router = *router;
+ if (router->valid) {
+ radeon_connector->router_bus = radeon_i2c_lookup(rdev, &router->i2c_info);
+ if (!radeon_connector->router_bus)
+ goto failed;
+ }
switch (connector_type) {
case DRM_MODE_CONNECTOR_VGA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
if (i2c_bus->valid) {
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
+ radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
if (!radeon_connector->ddc_bus)
goto failed;
}
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
if (i2c_bus->valid) {
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
+ radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
if (!radeon_connector->ddc_bus)
goto failed;
}
drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
if (i2c_bus->valid) {
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
+ radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
if (!radeon_connector->ddc_bus)
goto failed;
}
drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
if (i2c_bus->valid) {
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "HDMI");
+ radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
if (!radeon_connector->ddc_bus)
goto failed;
}
radeon_dig_connector->dp_i2c_bus = radeon_i2c_create_dp(dev, i2c_bus, "DP-auxch");
if (!radeon_dig_connector->dp_i2c_bus)
goto failed;
- if (connector_type == DRM_MODE_CONNECTOR_eDP)
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "eDP");
- else
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP");
+ radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
if (!radeon_connector->ddc_bus)
goto failed;
}
drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
if (i2c_bus->valid) {
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
+ radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
if (!radeon_connector->ddc_bus)
goto failed;
}
return;
failed:
- if (radeon_connector->ddc_bus)
- radeon_i2c_destroy(radeon_connector->ddc_bus);
drm_connector_cleanup(connector);
kfree(connector);
}
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
if (i2c_bus->valid) {
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
+ radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
if (!radeon_connector->ddc_bus)
goto failed;
}
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
if (i2c_bus->valid) {
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
+ radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
if (!radeon_connector->ddc_bus)
goto failed;
}
drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
if (i2c_bus->valid) {
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
+ radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
if (!radeon_connector->ddc_bus)
goto failed;
}
drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
if (i2c_bus->valid) {
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
+ radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
if (!radeon_connector->ddc_bus)
goto failed;
}
return;
failed:
- if (radeon_connector->ddc_bus)
- radeon_i2c_destroy(radeon_connector->ddc_bus);
drm_connector_cleanup(connector);
kfree(connector);
}
if (p->relocs[i].gobj == NULL) {
DRM_ERROR("gem object lookup failed 0x%x\n",
r->handle);
- return -EINVAL;
+ return -ENOENT;
}
p->relocs_ptr[i] = &p->relocs[i];
p->relocs[i].robj = p->relocs[i].gobj->driver_private;
obj = drm_gem_object_lookup(crtc->dev, file_priv, handle);
if (!obj) {
DRM_ERROR("Cannot find cursor object %x for crtc %d\n", handle, radeon_crtc->crtc_id);
- return -EINVAL;
+ return -ENOENT;
}
ret = radeon_gem_object_pin(obj, RADEON_GEM_DOMAIN_VRAM, &gpu_addr);
return -ENOMEM;
rdev->dummy_page.addr = pci_map_page(rdev->pdev, rdev->dummy_page.page,
0, PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
- if (!rdev->dummy_page.addr) {
+ if (pci_dma_mapping_error(rdev->pdev, rdev->dummy_page.addr)) {
+ dev_err(&rdev->pdev->dev, "Failed to DMA MAP the dummy page\n");
__free_page(rdev->dummy_page.page);
rdev->dummy_page.page = NULL;
return -ENOMEM;
}
static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
- u16 *blue, uint32_t size)
+ u16 *blue, uint32_t start, uint32_t size)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
- int i;
-
- if (size != 256) {
- return;
- }
+ int end = (start + size > 256) ? 256 : start + size, i;
/* userspace palettes are always correct as is */
- for (i = 0; i < 256; i++) {
+ for (i = start; i < end; i++) {
radeon_crtc->lut_r[i] = red[i] >> 6;
radeon_crtc->lut_g[i] = green[i] >> 6;
radeon_crtc->lut_b[i] = blue[i] >> 6;
radeon_connector->ddc_bus->rec.en_data_reg,
radeon_connector->ddc_bus->rec.y_clk_reg,
radeon_connector->ddc_bus->rec.y_data_reg);
+ if (radeon_connector->router_bus)
+ DRM_INFO(" DDC Router 0x%x/0x%x\n",
+ radeon_connector->router.mux_control_pin,
+ radeon_connector->router.mux_state);
} else {
if (connector->connector_type == DRM_MODE_CONNECTOR_VGA ||
connector->connector_type == DRM_MODE_CONNECTOR_DVII ||
struct radeon_device *rdev = dev->dev_private;
int ret = 0;
+ /* on hw with routers, select right port */
+ if (radeon_connector->router.valid)
+ radeon_router_select_port(radeon_connector);
+
if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
(radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
int ret = 0;
+ /* on hw with routers, select right port */
+ if (radeon_connector->router.valid)
+ radeon_router_select_port(radeon_connector);
+
if (!radeon_connector->ddc_bus)
return -1;
edid = drm_get_edid(connector, &radeon_connector->ddc_bus->adapter);
if (obj == NULL) {
dev_err(&dev->pdev->dev, "No GEM object associated to handle 0x%08X, "
"can't create framebuffer\n", mode_cmd->handle);
- return NULL;
+ return ERR_PTR(-ENOENT);
}
radeon_fb = kzalloc(sizeof(*radeon_fb), GFP_KERNEL);
- if (radeon_fb == NULL) {
- return NULL;
- }
+ if (radeon_fb == NULL)
+ return ERR_PTR(-ENOMEM);
radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj);
return ret;
}
+ /* init i2c buses */
+ radeon_i2c_init(rdev);
+
/* check combios for a valid hardcoded EDID - Sun servers */
if (!rdev->is_atom_bios) {
/* check for hardcoded EDID in BIOS */
drm_mode_config_cleanup(rdev->ddev);
rdev->mode_info.mode_config_initialized = false;
}
+ /* free i2c buses */
+ radeon_i2c_fini(rdev);
}
bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
drm_fb_helper_fill_fix(info, fb->pitch, fb->depth);
- info->flags = FBINFO_DEFAULT;
+ info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT;
info->fbops = &radeonfb_ops;
tmp = radeon_bo_gpu_offset(rbo) - rdev->mc.vram_start;
/* just do a BO wait for now */
gobj = drm_gem_object_lookup(dev, filp, args->handle);
if (gobj == NULL) {
- return -EINVAL;
+ return -ENOENT;
}
robj = gobj->driver_private;
gobj = drm_gem_object_lookup(dev, filp, args->handle);
if (gobj == NULL) {
- return -EINVAL;
+ return -ENOENT;
}
robj = gobj->driver_private;
args->addr_ptr = radeon_bo_mmap_offset(robj);
gobj = drm_gem_object_lookup(dev, filp, args->handle);
if (gobj == NULL) {
- return -EINVAL;
+ return -ENOENT;
}
robj = gobj->driver_private;
r = radeon_bo_wait(robj, &cur_placement, true);
gobj = drm_gem_object_lookup(dev, filp, args->handle);
if (gobj == NULL) {
- return -EINVAL;
+ return -ENOENT;
}
robj = gobj->driver_private;
r = radeon_bo_wait(robj, NULL, false);
DRM_DEBUG("%d \n", args->handle);
gobj = drm_gem_object_lookup(dev, filp, args->handle);
if (gobj == NULL)
- return -EINVAL;
+ return -ENOENT;
robj = gobj->driver_private;
r = radeon_bo_set_tiling_flags(robj, args->tiling_flags, args->pitch);
drm_gem_object_unreference_unlocked(gobj);
DRM_DEBUG("\n");
gobj = drm_gem_object_lookup(dev, filp, args->handle);
if (gobj == NULL)
- return -EINVAL;
+ return -ENOENT;
rbo = gobj->driver_private;
r = radeon_bo_reserve(rbo, false);
if (unlikely(r != 0))
}
};
+ /* on hw with routers, select right port */
+ if (radeon_connector->router.valid)
+ radeon_router_select_port(radeon_connector);
+
ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2);
if (ret == 2)
return true;
kfree(i2c);
}
+/* Add the default buses */
+void radeon_i2c_init(struct radeon_device *rdev)
+{
+ if (rdev->is_atom_bios)
+ radeon_atombios_i2c_init(rdev);
+ else
+ radeon_combios_i2c_init(rdev);
+}
+
+/* remove all the buses */
+void radeon_i2c_fini(struct radeon_device *rdev)
+{
+ int i;
+
+ for (i = 0; i < RADEON_MAX_I2C_BUS; i++) {
+ if (rdev->i2c_bus[i]) {
+ radeon_i2c_destroy(rdev->i2c_bus[i]);
+ rdev->i2c_bus[i] = NULL;
+ }
+ }
+}
+
+/* Add additional buses */
+void radeon_i2c_add(struct radeon_device *rdev,
+ struct radeon_i2c_bus_rec *rec,
+ const char *name)
+{
+ struct drm_device *dev = rdev->ddev;
+ int i;
+
+ for (i = 0; i < RADEON_MAX_I2C_BUS; i++) {
+ if (!rdev->i2c_bus[i]) {
+ rdev->i2c_bus[i] = radeon_i2c_create(dev, rec, name);
+ return;
+ }
+ }
+}
+
+/* looks up bus based on id */
+struct radeon_i2c_chan *radeon_i2c_lookup(struct radeon_device *rdev,
+ struct radeon_i2c_bus_rec *i2c_bus)
+{
+ int i;
+
+ for (i = 0; i < RADEON_MAX_I2C_BUS; i++) {
+ if (rdev->i2c_bus[i] &&
+ (rdev->i2c_bus[i]->rec.i2c_id == i2c_bus->i2c_id)) {
+ return rdev->i2c_bus[i];
+ }
+ }
+ return NULL;
+}
+
struct drm_encoder *radeon_best_encoder(struct drm_connector *connector)
{
return NULL;
addr, val);
}
+/* router switching */
+void radeon_router_select_port(struct radeon_connector *radeon_connector)
+{
+ u8 val;
+
+ if (!radeon_connector->router.valid)
+ return;
+
+ radeon_i2c_get_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x3, &val);
+ val &= radeon_connector->router.mux_control_pin;
+ radeon_i2c_put_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x3, val);
+ radeon_i2c_get_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x1, &val);
+ val &= radeon_connector->router.mux_control_pin;
+ val |= radeon_connector->router.mux_state;
+ radeon_i2c_put_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x1, val);
+}
+
info = data;
value_ptr = (uint32_t *)((unsigned long)info->value);
- value = *value_ptr;
+ if (DRM_COPY_FROM_USER(&value, value_ptr, sizeof(value)))
+ return -EFAULT;
+
switch (info->request) {
case RADEON_INFO_DEVICE_ID:
value = dev->pci_device;
return -EINVAL;
}
case RADEON_INFO_WANT_HYPERZ:
+ /* The "value" here is both an input and output parameter.
+ * If the input value is 1, filp requests hyper-z access.
+ * If the input value is 0, filp revokes its hyper-z access.
+ *
+ * When returning, the value is 1 if filp owns hyper-z access,
+ * 0 otherwise. */
+ if (value >= 2) {
+ DRM_DEBUG_KMS("WANT_HYPERZ: invalid value %d\n", value);
+ return -EINVAL;
+ }
mutex_lock(&dev->struct_mutex);
- if (rdev->hyperz_filp)
- value = 0;
- else {
- rdev->hyperz_filp = filp;
- value = 1;
+ if (value == 1) {
+ /* wants hyper-z */
+ if (!rdev->hyperz_filp)
+ rdev->hyperz_filp = filp;
+ } else if (value == 0) {
+ /* revokes hyper-z */
+ if (rdev->hyperz_filp == filp)
+ rdev->hyperz_filp = NULL;
}
+ value = rdev->hyperz_filp == filp ? 1 : 0;
mutex_unlock(&dev->struct_mutex);
break;
default:
RADEON_HPD_NONE = 0xff,
};
+#define RADEON_MAX_I2C_BUS 16
+
/* radeon gpio-based i2c
* 1. "mask" reg and bits
* grabs the gpio pins for software use
struct radeon_gpio_rec gpio;
};
+struct radeon_router {
+ bool valid;
+ u32 router_id;
+ struct radeon_i2c_bus_rec i2c_info;
+ u8 i2c_addr;
+ u8 mux_type;
+ u8 mux_control_pin;
+ u8 mux_state;
+};
+
struct radeon_connector {
struct drm_connector base;
uint32_t connector_id;
bool dac_load_detect;
uint16_t connector_object_id;
struct radeon_hpd hpd;
+ struct radeon_router router;
+ struct radeon_i2c_chan *router_bus;
};
struct radeon_framebuffer {
extern int radeon_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
uint8_t write_byte, uint8_t *read_byte);
+extern void radeon_i2c_init(struct radeon_device *rdev);
+extern void radeon_i2c_fini(struct radeon_device *rdev);
+extern void radeon_combios_i2c_init(struct radeon_device *rdev);
+extern void radeon_atombios_i2c_init(struct radeon_device *rdev);
+extern void radeon_i2c_add(struct radeon_device *rdev,
+ struct radeon_i2c_bus_rec *rec,
+ const char *name);
+extern struct radeon_i2c_chan *radeon_i2c_lookup(struct radeon_device *rdev,
+ struct radeon_i2c_bus_rec *i2c_bus);
extern struct radeon_i2c_chan *radeon_i2c_create_dp(struct drm_device *dev,
struct radeon_i2c_bus_rec *rec,
const char *name);
u8 slave_addr,
u8 addr,
u8 val);
+extern void radeon_router_select_port(struct radeon_connector *radeon_connector);
extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector);
extern int radeon_ddc_get_modes(struct radeon_connector *radeon_connector);
.attrs = hwmon_attributes,
};
-static void radeon_hwmon_init(struct radeon_device *rdev)
+static int radeon_hwmon_init(struct radeon_device *rdev)
{
- int err;
+ int err = 0;
rdev->pm.int_hwmon_dev = NULL;
case THERMAL_TYPE_RV770:
case THERMAL_TYPE_EVERGREEN:
rdev->pm.int_hwmon_dev = hwmon_device_register(rdev->dev);
+ if (IS_ERR(rdev->pm.int_hwmon_dev)) {
+ err = PTR_ERR(rdev->pm.int_hwmon_dev);
+ dev_err(rdev->dev,
+ "Unable to register hwmon device: %d\n", err);
+ break;
+ }
dev_set_drvdata(rdev->pm.int_hwmon_dev, rdev->ddev);
err = sysfs_create_group(&rdev->pm.int_hwmon_dev->kobj,
&hwmon_attrgroup);
- if (err)
- DRM_ERROR("Unable to create hwmon sysfs file: %d\n", err);
+ if (err) {
+ dev_err(rdev->dev,
+ "Unable to create hwmon sysfs file: %d\n", err);
+ hwmon_device_unregister(rdev->dev);
+ }
break;
default:
break;
}
+
+ return err;
}
static void radeon_hwmon_fini(struct radeon_device *rdev)
int radeon_pm_init(struct radeon_device *rdev)
{
int ret;
+
/* default to profile method */
rdev->pm.pm_method = PM_METHOD_PROFILE;
rdev->pm.profile = PM_PROFILE_DEFAULT;
}
/* set up the internal thermal sensor if applicable */
- radeon_hwmon_init(rdev);
+ ret = radeon_hwmon_init(rdev);
+ if (ret)
+ return ret;
if (rdev->pm.num_power_states > 1) {
/* where's the best place to put these? */
ret = device_create_file(rdev->dev, &dev_attr_power_profile);
0x4BD0 FG_FOG_COLOR_B
0x4BD4 FG_ALPHA_FUNC
0x4BD8 FG_DEPTH_SRC
+0x4BE0 FG_ALPHA_VALUE
0x4C00 US_ALU_CONST_R_0
0x4C04 US_ALU_CONST_G_0
0x4C08 US_ALU_CONST_B_0
if (ret) {
DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret);
- return NULL;
+ return ERR_PTR(ret);
}
return &vfb->base;
ret = vmw_user_dmabuf_lookup(tfile, mode_cmd->handle, &bo);
if (ret) {
DRM_ERROR("failed to find buffer: %i\n", ret);
- return NULL;
+ return ERR_PTR(-ENOENT);
}
ret = vmw_kms_new_framebuffer_dmabuf(dev_priv, bo, &vfb,
if (ret) {
DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret);
- return NULL;
+ return ERR_PTR(ret);
}
return &vfb->base;
/* vmw_user_surface_lookup takes one ref */
vmw_surface_unreference(&surface);
- return NULL;
+ return ERR_PTR(-EINVAL);
}
static struct drm_mode_config_funcs vmw_kms_funcs = {
static void vmw_ldu_crtc_gamma_set(struct drm_crtc *crtc,
u16 *r, u16 *g, u16 *b,
- uint32_t size)
+ uint32_t start, uint32_t size)
{
}
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{
struct egalax_data *td = hid_get_drvdata(hid);
+ /* Note, eGalax has two product lines: the first is resistive and
+ * uses a standard parallel multitouch protocol (product ID ==
+ * 48xx). The second is capacitive and uses an unusual "serial"
+ * protocol with a different message for each multitouch finger
+ * (product ID == 72xx). We do not yet generate a correct event
+ * sequence for the capacitive/serial protocol.
+ */
if (hid->claimed & HID_CLAIMED_INPUT) {
struct input_dev *input = field->hidinput->input;
static const struct hid_device_id egalax_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+ USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
{ }
};
MODULE_DEVICE_TABLE(hid, egalax_devices);
#define USB_VENDOR_ID_DWAV 0x0eef
#define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH 0x480d
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1 0x720c
#define USB_VENDOR_ID_ELECOM 0x056e
#define USB_DEVICE_ID_ELECOM_BM084 0x0061
ref_cnt--;
mutex_lock(&info->lock);
(*ref_cnt)--;
- may_release = !ref_cnt;
+ may_release = !*ref_cnt;
mutex_unlock(&info->lock);
if (may_release) {
- framebuffer_release(info);
vfree((u8 *)info->fix.smem_start);
+ framebuffer_release(info);
}
}
input_report_key(input, BTN_RIGHT, 0);
input_report_key(input, BTN_MIDDLE, 0);
input_report_abs(input, ABS_DISTANCE,
- input->absmax[ABS_DISTANCE]);
+ input_abs_get_max(input, ABS_DISTANCE));
} else {
input_report_key(input, BTN_TOUCH, 0);
input_report_key(input, BTN_STYLUS, 0);
/* Basics */
input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
- input->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) |
- BIT(ABS_PRESSURE) | BIT(ABS_DISTANCE);
- input->relbit[0] |= BIT(REL_WHEEL);
- set_bit(BTN_TOOL_PEN, input->keybit);
- set_bit(BTN_TOUCH, input->keybit);
- set_bit(BTN_STYLUS, input->keybit);
- set_bit(BTN_STYLUS2, input->keybit);
- set_bit(BTN_LEFT, input->keybit);
- set_bit(BTN_RIGHT, input->keybit);
- set_bit(BTN_MIDDLE, input->keybit);
+
+ __set_bit(REL_WHEEL, input->relbit);
+
+ __set_bit(BTN_TOOL_PEN, input->keybit);
+ __set_bit(BTN_TOUCH, input->keybit);
+ __set_bit(BTN_STYLUS, input->keybit);
+ __set_bit(BTN_STYLUS2, input->keybit);
+ __set_bit(BTN_LEFT, input->keybit);
+ __set_bit(BTN_RIGHT, input->keybit);
+ __set_bit(BTN_MIDDLE, input->keybit);
/* Pad */
input->evbit[0] |= BIT(EV_MSC);
- input->mscbit[0] |= BIT(MSC_SERIAL);
- set_bit(BTN_0, input->keybit);
- set_bit(BTN_1, input->keybit);
- set_bit(BTN_TOOL_FINGER, input->keybit);
- /* Distance, rubber and mouse */
- input->absbit[0] |= BIT(ABS_DISTANCE);
- set_bit(BTN_TOOL_RUBBER, input->keybit);
- set_bit(BTN_TOOL_MOUSE, input->keybit);
+ __set_bit(MSC_SERIAL, input->mscbit);
- input->absmax[ABS_PRESSURE] = 511;
- input->absmax[ABS_DISTANCE] = 32;
+ __set_bit(BTN_0, input->keybit);
+ __set_bit(BTN_1, input->keybit);
+ __set_bit(BTN_TOOL_FINGER, input->keybit);
- input->absmax[ABS_X] = 16704;
- input->absmax[ABS_Y] = 12064;
- input->absfuzz[ABS_X] = 4;
- input->absfuzz[ABS_Y] = 4;
+ /* Distance, rubber and mouse */
+ __set_bit(BTN_TOOL_RUBBER, input->keybit);
+ __set_bit(BTN_TOOL_MOUSE, input->keybit);
+
+ input_set_abs_params(input, ABS_X, 0, 16704, 4, 0);
+ input_set_abs_params(input, ABS_Y, 0, 12064, 4, 0);
+ input_set_abs_params(input, ABS_PRESSURE, 0, 511, 0, 0);
+ input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0);
return 0;
+
err_free:
kfree(wdata);
return ret;
{
struct hiddev_list *list;
struct usb_interface *intf;
+ struct hid_device *hid;
struct hiddev *hiddev;
int res;
intf = usb_find_interface(&hiddev_driver, iminor(inode));
if (!intf)
return -ENODEV;
- hiddev = usb_get_intfdata(intf);
+ hid = usb_get_intfdata(intf);
+ hiddev = hid->hiddev;
if (!(list = kzalloc(sizeof(struct hiddev_list), GFP_KERNEL)))
return -ENOMEM;
struct hiddev_list *list = file->private_data;
struct hiddev *hiddev = list->hiddev;
struct hid_device *hid = hiddev->hid;
- struct usb_device *dev = hid_to_usb_dev(hid);
+ struct usb_device *dev;
struct hiddev_collection_info cinfo;
struct hiddev_report_info rinfo;
struct hiddev_field_info finfo;
/* Called without BKL by compat methods so no BKL taken */
/* FIXME: Who or what stop this racing with a disconnect ?? */
- if (!hiddev->exist)
+ if (!hiddev->exist || !hid)
return -EIO;
+ dev = hid_to_usb_dev(hid);
+
switch (cmd) {
case HIDIOCGVERSION:
hid->hiddev = hiddev;
hiddev->hid = hid;
hiddev->exist = 1;
- usb_set_intfdata(usbhid->intf, usbhid);
retval = usb_register_dev(usbhid->intf, &hiddev_class);
if (retval) {
err_hid("Not able to get a minor for this device.");
config SENSORS_JC42
tristate "JEDEC JC42.4 compliant temperature sensors"
+ depends on I2C
help
If you say yes here you get support for Jedec JC42.4 compliant
temperature sensors. Support will include, but not be limited to,
functions of the National Semiconductor PC87427 Super-I/O chip.
The chip has two distinct logical devices, one for fan speed
monitoring and control, and one for voltage and temperature
- monitoring. Only fan speed monitoring is supported right now.
+ monitoring. Fan speed monitoring and control are supported, as
+ well as temperature monitoring. Voltages aren't supported yet.
This driver can also be built as a module. If so, the module
will be called pc87427.
Threshold values can be configured using sysfs.
Data from the different diodes are accessible via sysfs.
+config SENSORS_EMC2103
+ tristate "SMSC EMC2103"
+ depends on I2C
+ help
+ If you say yes here you get support for the temperature
+ and fan sensors of the SMSC EMC2103 chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called emc2103.
+
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
help
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
+obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
/* General properties */
struct device_node *of_node;
- struct of_device *of_dev;
+ struct platform_device *of_dev;
char has_device;
char vflag;
u32 orient1;
{
struct i2c_adapter *adapter = client->adapter;
int company, verstep, chip_index;
- struct device *dev;
-
- dev = &client->dev;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
if (company == asc7621_chips[chip_index].company_id &&
verstep == asc7621_chips[chip_index].verstep_id) {
- strlcpy(client->name, asc7621_chips[chip_index].name,
- I2C_NAME_SIZE);
strlcpy(info->type, asc7621_chips[chip_index].name,
I2C_NAME_SIZE);
- dev_info(&adapter->dev, "Matched %s\n",
- asc7621_chips[chip_index].name);
+ dev_info(&adapter->dev, "Matched %s at 0x%02x\n",
+ asc7621_chips[chip_index].name, client->addr);
return 0;
}
}
switch (action) {
case CPU_ONLINE:
- case CPU_ONLINE_FROZEN:
case CPU_DOWN_FAILED:
- case CPU_DOWN_FAILED_FROZEN:
coretemp_device_add(cpu);
break;
case CPU_DOWN_PREPARE:
- case CPU_DOWN_PREPARE_FROZEN:
coretemp_device_remove(cpu);
break;
}
return count;
}
+static ssize_t store_bit(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct thermal_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sda = to_sensor_dev_attr_2(attr);
+ unsigned long val;
+ int retval;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->mutex);
+ retval = i2c_smbus_read_byte_data(client, sda->nr);
+ if (retval < 0)
+ goto fail;
+
+ retval &= ~sda->index;
+ if (val)
+ retval |= sda->index;
+
+ retval = i2c_smbus_write_byte_data(client, sda->index, retval);
+ if (retval == 0)
+ retval = count;
+fail:
+ mutex_unlock(&data->mutex);
+ return retval;
+}
+
static ssize_t show_hyst(struct device *dev,
struct device_attribute *attr, char *buf)
{
static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO | S_IWUSR,
show_hyst, store_hyst, 0x1A);
+static SENSOR_DEVICE_ATTR_2(power_state, S_IRUGO | S_IWUSR,
+ show_bit, store_bit, 0x03, 0x40);
+
static struct attribute *mid_att_thermal[] = {
&sensor_dev_attr_temp1_min.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_power_state.dev_attr.attr,
NULL
};
--- /dev/null
+/*
+ emc2103.c - Support for SMSC EMC2103
+ Copyright (c) 2010 SMSC
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/* Addresses scanned */
+static const unsigned short normal_i2c[] = { 0x2E, I2C_CLIENT_END };
+
+static const u8 REG_TEMP[4] = { 0x00, 0x02, 0x04, 0x06 };
+static const u8 REG_TEMP_MIN[4] = { 0x3c, 0x38, 0x39, 0x3a };
+static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
+
+#define REG_CONF1 0x20
+#define REG_TEMP_MAX_ALARM 0x24
+#define REG_TEMP_MIN_ALARM 0x25
+#define REG_FAN_CONF1 0x42
+#define REG_FAN_TARGET_LO 0x4c
+#define REG_FAN_TARGET_HI 0x4d
+#define REG_FAN_TACH_HI 0x4e
+#define REG_FAN_TACH_LO 0x4f
+#define REG_PRODUCT_ID 0xfd
+#define REG_MFG_ID 0xfe
+
+/* equation 4 from datasheet: rpm = (3932160 * multipler) / count */
+#define FAN_RPM_FACTOR 3932160
+
+/* 2103-2 and 2103-4's 3rd temperature sensor can be connected to two diodes
+ * in anti-parallel mode, and in this configuration both can be read
+ * independently (so we have 4 temperature inputs). The device can't
+ * detect if it's connected in this mode, so we have to manually enable
+ * it. Default is to leave the device in the state it's already in (-1).
+ * This parameter allows APD mode to be optionally forced on or off */
+static int apd = -1;
+module_param(apd, bool, 0);
+MODULE_PARM_DESC(init, "Set to zero to disable anti-parallel diode mode");
+
+struct temperature {
+ s8 degrees;
+ u8 fraction; /* 0-7 multiples of 0.125 */
+};
+
+struct emc2103_data {
+ struct device *hwmon_dev;
+ struct mutex update_lock;
+ bool valid; /* registers are valid */
+ bool fan_rpm_control;
+ int temp_count; /* num of temp sensors */
+ unsigned long last_updated; /* in jiffies */
+ struct temperature temp[4]; /* internal + 3 external */
+ s8 temp_min[4]; /* no fractional part */
+ s8 temp_max[4]; /* no fractional part */
+ u8 temp_min_alarm;
+ u8 temp_max_alarm;
+ u8 fan_multiplier;
+ u16 fan_tach;
+ u16 fan_target;
+};
+
+static int read_u8_from_i2c(struct i2c_client *client, u8 i2c_reg, u8 *output)
+{
+ int status = i2c_smbus_read_byte_data(client, i2c_reg);
+ if (status < 0) {
+ dev_warn(&client->dev, "reg 0x%02x, err %d\n",
+ i2c_reg, status);
+ } else {
+ *output = status;
+ }
+ return status;
+}
+
+static void read_temp_from_i2c(struct i2c_client *client, u8 i2c_reg,
+ struct temperature *temp)
+{
+ u8 degrees, fractional;
+
+ if (read_u8_from_i2c(client, i2c_reg, °rees) < 0)
+ return;
+
+ if (read_u8_from_i2c(client, i2c_reg + 1, &fractional) < 0)
+ return;
+
+ temp->degrees = degrees;
+ temp->fraction = (fractional & 0xe0) >> 5;
+}
+
+static void read_fan_from_i2c(struct i2c_client *client, u16 *output,
+ u8 hi_addr, u8 lo_addr)
+{
+ u8 high_byte, lo_byte;
+
+ if (read_u8_from_i2c(client, hi_addr, &high_byte) < 0)
+ return;
+
+ if (read_u8_from_i2c(client, lo_addr, &lo_byte) < 0)
+ return;
+
+ *output = ((u16)high_byte << 5) | (lo_byte >> 3);
+}
+
+static void write_fan_target_to_i2c(struct i2c_client *client, u16 new_target)
+{
+ u8 high_byte = (new_target & 0x1fe0) >> 5;
+ u8 low_byte = (new_target & 0x001f) << 3;
+ i2c_smbus_write_byte_data(client, REG_FAN_TARGET_LO, low_byte);
+ i2c_smbus_write_byte_data(client, REG_FAN_TARGET_HI, high_byte);
+}
+
+static void read_fan_config_from_i2c(struct i2c_client *client)
+
+{
+ struct emc2103_data *data = i2c_get_clientdata(client);
+ u8 conf1;
+
+ if (read_u8_from_i2c(client, REG_FAN_CONF1, &conf1) < 0)
+ return;
+
+ data->fan_multiplier = 1 << ((conf1 & 0x60) >> 5);
+ data->fan_rpm_control = (conf1 & 0x80) != 0;
+}
+
+static struct emc2103_data *emc2103_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct emc2103_data *data = i2c_get_clientdata(client);
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ int i;
+
+ for (i = 0; i < data->temp_count; i++) {
+ read_temp_from_i2c(client, REG_TEMP[i], &data->temp[i]);
+ read_u8_from_i2c(client, REG_TEMP_MIN[i],
+ &data->temp_min[i]);
+ read_u8_from_i2c(client, REG_TEMP_MAX[i],
+ &data->temp_max[i]);
+ }
+
+ read_u8_from_i2c(client, REG_TEMP_MIN_ALARM,
+ &data->temp_min_alarm);
+ read_u8_from_i2c(client, REG_TEMP_MAX_ALARM,
+ &data->temp_max_alarm);
+
+ read_fan_from_i2c(client, &data->fan_tach,
+ REG_FAN_TACH_HI, REG_FAN_TACH_LO);
+ read_fan_from_i2c(client, &data->fan_target,
+ REG_FAN_TARGET_HI, REG_FAN_TARGET_LO);
+ read_fan_config_from_i2c(client);
+
+ data->last_updated = jiffies;
+ data->valid = true;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *da, char *buf)
+{
+ int nr = to_sensor_dev_attr(da)->index;
+ struct emc2103_data *data = emc2103_update_device(dev);
+ int millidegrees = data->temp[nr].degrees * 1000
+ + data->temp[nr].fraction * 125;
+ return sprintf(buf, "%d\n", millidegrees);
+}
+
+static ssize_t
+show_temp_min(struct device *dev, struct device_attribute *da, char *buf)
+{
+ int nr = to_sensor_dev_attr(da)->index;
+ struct emc2103_data *data = emc2103_update_device(dev);
+ int millidegrees = data->temp_min[nr] * 1000;
+ return sprintf(buf, "%d\n", millidegrees);
+}
+
+static ssize_t
+show_temp_max(struct device *dev, struct device_attribute *da, char *buf)
+{
+ int nr = to_sensor_dev_attr(da)->index;
+ struct emc2103_data *data = emc2103_update_device(dev);
+ int millidegrees = data->temp_max[nr] * 1000;
+ return sprintf(buf, "%d\n", millidegrees);
+}
+
+static ssize_t
+show_temp_fault(struct device *dev, struct device_attribute *da, char *buf)
+{
+ int nr = to_sensor_dev_attr(da)->index;
+ struct emc2103_data *data = emc2103_update_device(dev);
+ bool fault = (data->temp[nr].degrees == -128);
+ return sprintf(buf, "%d\n", fault ? 1 : 0);
+}
+
+static ssize_t
+show_temp_min_alarm(struct device *dev, struct device_attribute *da, char *buf)
+{
+ int nr = to_sensor_dev_attr(da)->index;
+ struct emc2103_data *data = emc2103_update_device(dev);
+ bool alarm = data->temp_min_alarm & (1 << nr);
+ return sprintf(buf, "%d\n", alarm ? 1 : 0);
+}
+
+static ssize_t
+show_temp_max_alarm(struct device *dev, struct device_attribute *da, char *buf)
+{
+ int nr = to_sensor_dev_attr(da)->index;
+ struct emc2103_data *data = emc2103_update_device(dev);
+ bool alarm = data->temp_max_alarm & (1 << nr);
+ return sprintf(buf, "%d\n", alarm ? 1 : 0);
+}
+
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(da)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct emc2103_data *data = i2c_get_clientdata(client);
+ long val;
+
+ int result = strict_strtol(buf, 10, &val);
+ if (result < 0)
+ return -EINVAL;
+
+ val = DIV_ROUND_CLOSEST(val, 1000);
+ if ((val < -63) || (val > 127))
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->temp_min[nr] = val;
+ i2c_smbus_write_byte_data(client, REG_TEMP_MIN[nr], val);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(da)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct emc2103_data *data = i2c_get_clientdata(client);
+ long val;
+
+ int result = strict_strtol(buf, 10, &val);
+ if (result < 0)
+ return -EINVAL;
+
+ val = DIV_ROUND_CLOSEST(val, 1000);
+ if ((val < -63) || (val > 127))
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->temp_max[nr] = val;
+ i2c_smbus_write_byte_data(client, REG_TEMP_MAX[nr], val);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *da, char *buf)
+{
+ struct emc2103_data *data = emc2103_update_device(dev);
+ int rpm = 0;
+ if (data->fan_tach != 0)
+ rpm = (FAN_RPM_FACTOR * data->fan_multiplier) / data->fan_tach;
+ return sprintf(buf, "%d\n", rpm);
+}
+
+static ssize_t
+show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
+{
+ struct emc2103_data *data = emc2103_update_device(dev);
+ int fan_div = 8 / data->fan_multiplier;
+ return sprintf(buf, "%d\n", fan_div);
+}
+
+/* Note: we also update the fan target here, because its value is
+ determined in part by the fan clock divider. This follows the principle
+ of least surprise; the user doesn't expect the fan target to change just
+ because the divider changed. */
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct emc2103_data *data = emc2103_update_device(dev);
+ struct i2c_client *client = to_i2c_client(dev);
+ int new_range_bits, old_div = 8 / data->fan_multiplier;
+ long new_div;
+
+ int status = strict_strtol(buf, 10, &new_div);
+ if (status < 0)
+ return -EINVAL;
+
+ if (new_div == old_div) /* No change */
+ return count;
+
+ switch (new_div) {
+ case 1:
+ new_range_bits = 3;
+ break;
+ case 2:
+ new_range_bits = 2;
+ break;
+ case 4:
+ new_range_bits = 1;
+ break;
+ case 8:
+ new_range_bits = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mutex_lock(&data->update_lock);
+
+ status = i2c_smbus_read_byte_data(client, REG_FAN_CONF1);
+ if (status < 0) {
+ dev_dbg(&client->dev, "reg 0x%02x, err %d\n",
+ REG_FAN_CONF1, status);
+ mutex_unlock(&data->update_lock);
+ return -EIO;
+ }
+ status &= 0x9F;
+ status |= (new_range_bits << 5);
+ i2c_smbus_write_byte_data(client, REG_FAN_CONF1, status);
+
+ data->fan_multiplier = 8 / new_div;
+
+ /* update fan target if high byte is not disabled */
+ if ((data->fan_target & 0x1fe0) != 0x1fe0) {
+ u16 new_target = (data->fan_target * old_div) / new_div;
+ data->fan_target = min(new_target, (u16)0x1fff);
+ write_fan_target_to_i2c(client, data->fan_target);
+ }
+
+ /* invalidate data to force re-read from hardware */
+ data->valid = false;
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_fan_target(struct device *dev, struct device_attribute *da, char *buf)
+{
+ struct emc2103_data *data = emc2103_update_device(dev);
+ int rpm = 0;
+
+ /* high byte of 0xff indicates disabled so return 0 */
+ if ((data->fan_target != 0) && ((data->fan_target & 0x1fe0) != 0x1fe0))
+ rpm = (FAN_RPM_FACTOR * data->fan_multiplier)
+ / data->fan_target;
+
+ return sprintf(buf, "%d\n", rpm);
+}
+
+static ssize_t set_fan_target(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct emc2103_data *data = emc2103_update_device(dev);
+ struct i2c_client *client = to_i2c_client(dev);
+ long rpm_target;
+
+ int result = strict_strtol(buf, 10, &rpm_target);
+ if (result < 0)
+ return -EINVAL;
+
+ /* Datasheet states 16384 as maximum RPM target (table 3.2) */
+ if ((rpm_target < 0) || (rpm_target > 16384))
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+
+ if (rpm_target == 0)
+ data->fan_target = 0x1fff;
+ else
+ data->fan_target = SENSORS_LIMIT(
+ (FAN_RPM_FACTOR * data->fan_multiplier) / rpm_target,
+ 0, 0x1fff);
+
+ write_fan_target_to_i2c(client, data->fan_target);
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_fan_fault(struct device *dev, struct device_attribute *da, char *buf)
+{
+ struct emc2103_data *data = emc2103_update_device(dev);
+ bool fault = ((data->fan_tach & 0x1fe0) == 0x1fe0);
+ return sprintf(buf, "%d\n", fault ? 1 : 0);
+}
+
+static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *da, char *buf)
+{
+ struct emc2103_data *data = emc2103_update_device(dev);
+ return sprintf(buf, "%d\n", data->fan_rpm_control ? 3 : 0);
+}
+
+static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct emc2103_data *data = i2c_get_clientdata(client);
+ long new_value;
+ u8 conf_reg;
+
+ int result = strict_strtol(buf, 10, &new_value);
+ if (result < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ switch (new_value) {
+ case 0:
+ data->fan_rpm_control = false;
+ break;
+ case 3:
+ data->fan_rpm_control = true;
+ break;
+ default:
+ mutex_unlock(&data->update_lock);
+ return -EINVAL;
+ }
+
+ read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+
+ if (data->fan_rpm_control)
+ conf_reg |= 0x80;
+ else
+ conf_reg &= ~0x80;
+
+ i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg);
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, show_temp_min,
+ set_temp_min, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp_max,
+ set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_temp_min_alarm,
+ NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_temp_max_alarm,
+ NULL, 0);
+
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, show_temp_min,
+ set_temp_min, 1);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max,
+ set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_temp_min_alarm,
+ NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_temp_max_alarm,
+ NULL, 1);
+
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO | S_IWUSR, show_temp_min,
+ set_temp_min, 2);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max,
+ set_temp_max, 2);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_temp_min_alarm,
+ NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_temp_max_alarm,
+ NULL, 2);
+
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_min, S_IRUGO | S_IWUSR, show_temp_min,
+ set_temp_min, 3);
+static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO | S_IWUSR, show_temp_max,
+ set_temp_max, 3);
+static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_temp_fault, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO, show_temp_min_alarm,
+ NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_temp_max_alarm,
+ NULL, 3);
+
+static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL);
+static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, show_fan_div, set_fan_div);
+static DEVICE_ATTR(fan1_target, S_IRUGO | S_IWUSR, show_fan_target,
+ set_fan_target);
+static DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL);
+
+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
+ set_pwm_enable);
+
+/* sensors present on all models */
+static struct attribute *emc2103_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_fault.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ &dev_attr_fan1_input.attr,
+ &dev_attr_fan1_div.attr,
+ &dev_attr_fan1_target.attr,
+ &dev_attr_fan1_fault.attr,
+ &dev_attr_pwm1_enable.attr,
+ NULL
+};
+
+/* extra temperature sensors only present on 2103-2 and 2103-4 */
+static struct attribute *emc2103_attributes_temp3[] = {
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+ NULL
+};
+
+/* extra temperature sensors only present on 2103-2 and 2103-4 in APD mode */
+static struct attribute *emc2103_attributes_temp4[] = {
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_min.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_fault.dev_attr.attr,
+ &sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group emc2103_group = {
+ .attrs = emc2103_attributes,
+};
+
+static const struct attribute_group emc2103_temp3_group = {
+ .attrs = emc2103_attributes_temp3,
+};
+
+static const struct attribute_group emc2103_temp4_group = {
+ .attrs = emc2103_attributes_temp4,
+};
+
+static int
+emc2103_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct emc2103_data *data;
+ int status;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ data = kzalloc(sizeof(struct emc2103_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ /* 2103-2 and 2103-4 have 3 external diodes, 2103-1 has 1 */
+ status = i2c_smbus_read_byte_data(client, REG_PRODUCT_ID);
+ if (status == 0x24) {
+ /* 2103-1 only has 1 external diode */
+ data->temp_count = 2;
+ } else {
+ /* 2103-2 and 2103-4 have 3 or 4 external diodes */
+ status = i2c_smbus_read_byte_data(client, REG_CONF1);
+ if (status < 0) {
+ dev_dbg(&client->dev, "reg 0x%02x, err %d\n", REG_CONF1,
+ status);
+ goto exit_free;
+ }
+
+ /* detect current state of hardware */
+ data->temp_count = (status & 0x01) ? 4 : 3;
+
+ /* force APD state if module parameter is set */
+ if (apd == 0) {
+ /* force APD mode off */
+ data->temp_count = 3;
+ status &= ~(0x01);
+ i2c_smbus_write_byte_data(client, REG_CONF1, status);
+ } else if (apd == 1) {
+ /* force APD mode on */
+ data->temp_count = 4;
+ status |= 0x01;
+ i2c_smbus_write_byte_data(client, REG_CONF1, status);
+ }
+ }
+
+ /* Register sysfs hooks */
+ status = sysfs_create_group(&client->dev.kobj, &emc2103_group);
+ if (status)
+ goto exit_free;
+
+ if (data->temp_count >= 3) {
+ status = sysfs_create_group(&client->dev.kobj,
+ &emc2103_temp3_group);
+ if (status)
+ goto exit_remove;
+ }
+
+ if (data->temp_count == 4) {
+ status = sysfs_create_group(&client->dev.kobj,
+ &emc2103_temp4_group);
+ if (status)
+ goto exit_remove_temp3;
+ }
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ status = PTR_ERR(data->hwmon_dev);
+ goto exit_remove_temp4;
+ }
+
+ dev_info(&client->dev, "%s: sensor '%s'\n",
+ dev_name(data->hwmon_dev), client->name);
+
+ return 0;
+
+exit_remove_temp4:
+ if (data->temp_count == 4)
+ sysfs_remove_group(&client->dev.kobj, &emc2103_temp4_group);
+exit_remove_temp3:
+ if (data->temp_count >= 3)
+ sysfs_remove_group(&client->dev.kobj, &emc2103_temp3_group);
+exit_remove:
+ sysfs_remove_group(&client->dev.kobj, &emc2103_group);
+exit_free:
+ kfree(data);
+ return status;
+}
+
+static int emc2103_remove(struct i2c_client *client)
+{
+ struct emc2103_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+
+ if (data->temp_count == 4)
+ sysfs_remove_group(&client->dev.kobj, &emc2103_temp4_group);
+
+ if (data->temp_count >= 3)
+ sysfs_remove_group(&client->dev.kobj, &emc2103_temp3_group);
+
+ sysfs_remove_group(&client->dev.kobj, &emc2103_group);
+
+ kfree(data);
+ return 0;
+}
+
+static const struct i2c_device_id emc2103_ids[] = {
+ { "emc2103", 0, },
+ { /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, emc2103_ids);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int
+emc2103_detect(struct i2c_client *new_client, struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = new_client->adapter;
+ int manufacturer, product;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ manufacturer = i2c_smbus_read_byte_data(new_client, REG_MFG_ID);
+ if (manufacturer != 0x5D)
+ return -ENODEV;
+
+ product = i2c_smbus_read_byte_data(new_client, REG_PRODUCT_ID);
+ if ((product != 0x24) && (product != 0x26))
+ return -ENODEV;
+
+ strlcpy(info->type, "emc2103", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static struct i2c_driver emc2103_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "emc2103",
+ },
+ .probe = emc2103_probe,
+ .remove = emc2103_remove,
+ .id_table = emc2103_ids,
+ .detect = emc2103_detect,
+ .address_list = normal_i2c,
+};
+
+static int __init sensors_emc2103_init(void)
+{
+ return i2c_add_driver(&emc2103_driver);
+}
+
+static void __exit sensors_emc2103_exit(void)
+{
+ i2c_del_driver(&emc2103_driver);
+}
+
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
+MODULE_DESCRIPTION("SMSC EMC2103 hwmon driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_emc2103_init);
+module_exit(sensors_emc2103_exit);
u8 revision;
u8 vid_value;
u8 beep_pin;
+ u8 internal; /* Internal sensors can be labeled */
/* Features skipped based on config or DMI */
u8 skip_vid;
u8 skip_fan;
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+static ssize_t show_label(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ static const char *labels[] = {
+ "+5V",
+ "5VSB",
+ "Vbat",
+ };
+ int nr = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%s\n", labels[nr]);
+}
+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 2);
+
static ssize_t show_name(struct device *dev, struct device_attribute
*devattr, char *buf)
{
.attrs = it87_attributes_vid,
};
+static struct attribute *it87_attributes_label[] = {
+ &sensor_dev_attr_in3_label.dev_attr.attr,
+ &sensor_dev_attr_in7_label.dev_attr.attr,
+ &sensor_dev_attr_in8_label.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group it87_group_label = {
+ .attrs = it87_attributes_vid,
+};
+
/* SuperIO detection - will change isa_address if a chip is found */
static int __init it87_find(unsigned short *address,
struct it87_sio_data *sio_data)
pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
chip_type, *address, sio_data->revision);
+ /* in8 (Vbat) is always internal */
+ sio_data->internal = (1 << 2);
+
/* Read GPIO config and VID value from LDN 7 (GPIO) */
if (sio_data->type == it87) {
/* The IT8705F doesn't have VID pins at all */
pr_notice("it87: Routing internal VCCH to in7\n");
}
if (reg & (1 << 0))
- pr_info("it87: in3 is VCC (+5V)\n");
+ sio_data->internal |= (1 << 0);
if (reg & (1 << 1))
- pr_info("it87: in7 is VCCH (+5V Stand-By)\n");
+ sio_data->internal |= (1 << 1);
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
}
}
if (!sio_data->skip_vid)
sysfs_remove_group(&dev->kobj, &it87_group_vid);
+ sysfs_remove_group(&dev->kobj, &it87_group_label);
}
static int __devinit it87_probe(struct platform_device *pdev)
goto ERROR4;
}
+ /* Export labels for internal sensors */
+ for (i = 0; i < 3; i++) {
+ if (!(sio_data->internal & (1 << i)))
+ continue;
+ err = sysfs_create_file(&dev->kobj,
+ it87_attributes_label[i]);
+ if (err)
+ goto ERROR4;
+ }
+
data->hwmon_dev = hwmon_device_register(dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
&sensor_dev_attr_temp3_input.dev_attr);
if (err)
goto exit_remove;
- if (data->sensorsp & SEL_PLACE)
+ if (data->sensorsp & SEL_PLACE) {
err = device_create_file(&pdev->dev,
&sensor_dev_attr_temp4_input.
dev_attr);
if (err)
goto exit_remove;
+ }
}
err = device_create_file(&pdev->dev, &dev_attr_name);
return 0;
}
+#ifdef CONFIG_PM
+static int lm75_suspend(struct device *dev)
+{
+ int status;
+ struct i2c_client *client = to_i2c_client(dev);
+ status = lm75_read_value(client, LM75_REG_CONF);
+ if (status < 0) {
+ dev_dbg(&client->dev, "Can't read config? %d\n", status);
+ return status;
+ }
+ status = status | LM75_SHUTDOWN;
+ lm75_write_value(client, LM75_REG_CONF, status);
+ return 0;
+}
+
+static int lm75_resume(struct device *dev)
+{
+ int status;
+ struct i2c_client *client = to_i2c_client(dev);
+ status = lm75_read_value(client, LM75_REG_CONF);
+ if (status < 0) {
+ dev_dbg(&client->dev, "Can't read config? %d\n", status);
+ return status;
+ }
+ status = status & ~LM75_SHUTDOWN;
+ lm75_write_value(client, LM75_REG_CONF, status);
+ return 0;
+}
+
+static const struct dev_pm_ops lm75_dev_pm_ops = {
+ .suspend = lm75_suspend,
+ .resume = lm75_resume,
+};
+#define LM75_DEV_PM_OPS (&lm75_dev_pm_ops)
+#else
+#define LM75_DEV_PM_OPS NULL
+#endif /* CONFIG_PM */
+
static struct i2c_driver lm75_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "lm75",
+ .pm = LM75_DEV_PM_OPS,
},
.probe = lm75_probe,
.remove = lm75_remove,
/* straight from the datasheet */
#define LM75_TEMP_MIN (-55000)
#define LM75_TEMP_MAX 125000
+#define LM75_SHUTDOWN 0x01
/* TEMP: 0.001C/bit (-55C to +125C)
REG: (0.5C/bit, two's complement) << 7 */
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/i2c/ltc4245.h>
/* Here are names of the chip's registers (a.k.a. commands) */
enum ltc4245_cmd {
/* Voltage registers */
u8 vregs[0x0d];
+
+ /* GPIO ADC registers */
+ bool use_extra_gpios;
+ int gpios[3];
};
+/*
+ * Update the readings from the GPIO pins. If the driver has been configured to
+ * sample all GPIO's as analog voltages, a round-robin sampling method is used.
+ * Otherwise, only the configured GPIO pin is sampled.
+ *
+ * LOCKING: must hold data->update_lock
+ */
+static void ltc4245_update_gpios(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ltc4245_data *data = i2c_get_clientdata(client);
+ u8 gpio_curr, gpio_next, gpio_reg;
+ int i;
+
+ /* no extra gpio support, we're basically done */
+ if (!data->use_extra_gpios) {
+ data->gpios[0] = data->vregs[LTC4245_GPIOADC - 0x10];
+ return;
+ }
+
+ /*
+ * If the last reading was too long ago, then we mark all old GPIO
+ * readings as stale by setting them to -EAGAIN
+ */
+ if (time_after(jiffies, data->last_updated + 5 * HZ)) {
+ dev_dbg(&client->dev, "Marking GPIOs invalid\n");
+ for (i = 0; i < ARRAY_SIZE(data->gpios); i++)
+ data->gpios[i] = -EAGAIN;
+ }
+
+ /*
+ * Get the current GPIO pin
+ *
+ * The datasheet calls these GPIO[1-3], but we'll calculate the zero
+ * based array index instead, and call them GPIO[0-2]. This is much
+ * easier to think about.
+ */
+ gpio_curr = (data->cregs[LTC4245_GPIO] & 0xc0) >> 6;
+ if (gpio_curr > 0)
+ gpio_curr -= 1;
+
+ /* Read the GPIO voltage from the GPIOADC register */
+ data->gpios[gpio_curr] = data->vregs[LTC4245_GPIOADC - 0x10];
+
+ /* Find the next GPIO pin to read */
+ gpio_next = (gpio_curr + 1) % ARRAY_SIZE(data->gpios);
+
+ /*
+ * Calculate the correct setting for the GPIO register so it will
+ * sample the next GPIO pin
+ */
+ gpio_reg = (data->cregs[LTC4245_GPIO] & 0x3f) | ((gpio_next + 1) << 6);
+
+ /* Update the GPIO register */
+ i2c_smbus_write_byte_data(client, LTC4245_GPIO, gpio_reg);
+
+ /* Update saved data */
+ data->cregs[LTC4245_GPIO] = gpio_reg;
+}
+
static struct ltc4245_data *ltc4245_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
data->vregs[i] = val;
}
+ /* Update GPIO readings */
+ ltc4245_update_gpios(dev);
+
data->last_updated = jiffies;
data->valid = 1;
}
return snprintf(buf, PAGE_SIZE, "%u\n", (reg & mask) ? 1 : 0);
}
+static ssize_t ltc4245_show_gpio(struct device *dev,
+ struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ltc4245_data *data = ltc4245_update_device(dev);
+ int val = data->gpios[attr->index];
+
+ /* handle stale GPIO's */
+ if (val < 0)
+ return val;
+
+ /* Convert to millivolts and print */
+ return snprintf(buf, PAGE_SIZE, "%u\n", val * 10);
+}
+
/* These macros are used below in constructing device attribute objects
* for use with sysfs_create_group() to make a sysfs device file
* for each register.
static SENSOR_DEVICE_ATTR_2(name, S_IRUGO, \
ltc4245_show_alarm, NULL, (mask), reg)
+#define LTC4245_GPIO_VOLTAGE(name, gpio_num) \
+ static SENSOR_DEVICE_ATTR(name, S_IRUGO, \
+ ltc4245_show_gpio, NULL, gpio_num)
+
/* Construct a sensor_device_attribute structure for each register */
/* Input voltages */
LTC4245_ALARM(in8_min_alarm, (1 << 3), LTC4245_FAULT2);
/* GPIO voltages */
-LTC4245_VOLTAGE(in9_input, LTC4245_GPIOADC);
+LTC4245_GPIO_VOLTAGE(in9_input, 0);
+LTC4245_GPIO_VOLTAGE(in10_input, 1);
+LTC4245_GPIO_VOLTAGE(in11_input, 2);
/* Power Consumption (virtual) */
LTC4245_POWER(power1_input, LTC4245_12VSENSE);
/* Finally, construct an array of pointers to members of the above objects,
* as required for sysfs_create_group()
*/
-static struct attribute *ltc4245_attributes[] = {
+static struct attribute *ltc4245_std_attributes[] = {
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
NULL,
};
-static const struct attribute_group ltc4245_group = {
- .attrs = ltc4245_attributes,
+static struct attribute *ltc4245_gpio_attributes[] = {
+ &sensor_dev_attr_in10_input.dev_attr.attr,
+ &sensor_dev_attr_in11_input.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ltc4245_std_group = {
+ .attrs = ltc4245_std_attributes,
+};
+
+static const struct attribute_group ltc4245_gpio_group = {
+ .attrs = ltc4245_gpio_attributes,
};
+static int ltc4245_sysfs_create_groups(struct i2c_client *client)
+{
+ struct ltc4245_data *data = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
+ int ret;
+
+ /* register the standard sysfs attributes */
+ ret = sysfs_create_group(&dev->kobj, <c4245_std_group);
+ if (ret) {
+ dev_err(dev, "unable to register standard attributes\n");
+ return ret;
+ }
+
+ /* if we're using the extra gpio support, register it's attributes */
+ if (data->use_extra_gpios) {
+ ret = sysfs_create_group(&dev->kobj, <c4245_gpio_group);
+ if (ret) {
+ dev_err(dev, "unable to register gpio attributes\n");
+ sysfs_remove_group(&dev->kobj, <c4245_std_group);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void ltc4245_sysfs_remove_groups(struct i2c_client *client)
+{
+ struct ltc4245_data *data = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
+
+ if (data->use_extra_gpios)
+ sysfs_remove_group(&dev->kobj, <c4245_gpio_group);
+
+ sysfs_remove_group(&dev->kobj, <c4245_std_group);
+}
+
+static bool ltc4245_use_extra_gpios(struct i2c_client *client)
+{
+ struct ltc4245_platform_data *pdata = dev_get_platdata(&client->dev);
+#ifdef CONFIG_OF
+ struct device_node *np = client->dev.of_node;
+#endif
+
+ /* prefer platform data */
+ if (pdata)
+ return pdata->use_extra_gpios;
+
+#ifdef CONFIG_OF
+ /* fallback on OF */
+ if (of_find_property(np, "ltc4245,use-extra-gpios", NULL))
+ return true;
+#endif
+
+ return false;
+}
+
static int ltc4245_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
+ data->use_extra_gpios = ltc4245_use_extra_gpios(client);
/* Initialize the LTC4245 chip */
i2c_smbus_write_byte_data(client, LTC4245_FAULT1, 0x00);
i2c_smbus_write_byte_data(client, LTC4245_FAULT2, 0x00);
/* Register sysfs hooks */
- ret = sysfs_create_group(&client->dev.kobj, <c4245_group);
+ ret = ltc4245_sysfs_create_groups(client);
if (ret)
- goto out_sysfs_create_group;
+ goto out_sysfs_create_groups;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
return 0;
out_hwmon_device_register:
- sysfs_remove_group(&client->dev.kobj, <c4245_group);
-out_sysfs_create_group:
+ ltc4245_sysfs_remove_groups(client);
+out_sysfs_create_groups:
kfree(data);
out_kzalloc:
return ret;
struct ltc4245_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, <c4245_group);
-
+ ltc4245_sysfs_remove_groups(client);
kfree(data);
return 0;
* Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/mfd/mc13783-private.h>
+#include <linux/mfd/mc13783.h>
#include <linux/platform_device.h>
#include <linux/hwmon-sysfs.h>
#include <linux/kernel.h>
.attrs = mc13783_attr_ts,
};
+static int mc13783_adc_use_touchscreen(struct platform_device *pdev)
+{
+ struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+ unsigned flags = mc13783_get_flags(priv->mc13783);
+
+ return flags & MC13783_USE_TOUCHSCREEN;
+}
+
static int __init mc13783_adc_probe(struct platform_device *pdev)
{
struct mc13783_adc_priv *priv;
if (ret)
goto out_err_create1;
- if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+ if (!mc13783_adc_use_touchscreen(pdev)) {
ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_ts);
if (ret)
goto out_err_create2;
+ }
priv->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(priv->hwmon_dev)) {
out_err_register:
- if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+ if (!mc13783_adc_use_touchscreen(pdev))
sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
out_err_create2:
hwmon_device_unregister(priv->hwmon_dev);
- if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+ if (!mc13783_adc_use_touchscreen(pdev))
sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);
static int __init pc87360_device_add(unsigned short address)
{
- struct resource res = {
- .name = "pc87360",
- .flags = IORESOURCE_IO,
- };
- int err, i;
+ struct resource res[3];
+ int err, i, res_count;
pdev = platform_device_alloc("pc87360", address);
if (!pdev) {
goto exit;
}
+ memset(res, 0, 3 * sizeof(struct resource));
+ res_count = 0;
for (i = 0; i < 3; i++) {
if (!extra_isa[i])
continue;
- res.start = extra_isa[i];
- res.end = extra_isa[i] + PC87360_EXTENT - 1;
+ res[res_count].start = extra_isa[i];
+ res[res_count].end = extra_isa[i] + PC87360_EXTENT - 1;
+ res[res_count].name = "pc87360",
+ res[res_count].flags = IORESOURCE_IO,
- err = acpi_check_resource_conflict(&res);
+ err = acpi_check_resource_conflict(&res[res_count]);
if (err)
goto exit_device_put;
- err = platform_device_add_resources(pdev, &res, 1);
- if (err) {
- printk(KERN_ERR "pc87360: Device resource[%d] "
- "addition failed (%d)\n", i, err);
- goto exit_device_put;
- }
+ res_count++;
+ }
+
+ err = platform_device_add_resources(pdev, res, res_count);
+ if (err) {
+ printk(KERN_ERR "pc87360: Device resources addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
}
err = platform_device_add(pdev);
/*
* pc87427.c - hardware monitoring driver for the
* National Semiconductor PC87427 Super-I/O chip
- * Copyright (C) 2006 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2006, 2008, 2010 Jean Delvare <khali@linux-fr.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* Supports the following chips:
*
* Chip #vin #fan #pwm #temp devid
- * PC87427 - 8 - - 0xF2
+ * PC87427 - 8 4 6 0xF2
*
* This driver assumes that no more than one chip is present.
- * Only fan inputs are supported so far, although the chip can do much more.
+ * Only fans are fully supported so far. Temperatures are in read-only
+ * mode, and voltages aren't supported at all.
*/
#include <linux/module.h>
u16 fan[8]; /* register values */
u16 fan_min[8]; /* register values */
u8 fan_status[8]; /* register values */
+
+ u8 pwm_enabled; /* bit vector */
+ u8 pwm_auto_ok; /* bit vector */
+ u8 pwm_enable[4]; /* register values */
+ u8 pwm[4]; /* register values */
+
+ u8 temp_enabled; /* bit vector */
+ s16 temp[6]; /* register values */
+ s8 temp_min[6]; /* register values */
+ s8 temp_max[6]; /* register values */
+ s8 temp_crit[6]; /* register values */
+ u8 temp_status[6]; /* register values */
+ u8 temp_type[6]; /* register values */
+};
+
+struct pc87427_sio_data {
+ unsigned short address[2];
+ u8 has_fanin;
+ u8 has_fanout;
};
/*
#define SIOREG_LDSEL 0x07 /* Logical device select */
#define SIOREG_DEVID 0x20 /* Device ID */
+#define SIOREG_CF2 0x22 /* Configuration 2 */
+#define SIOREG_CF3 0x23 /* Configuration 3 */
+#define SIOREG_CF4 0x24 /* Configuration 4 */
+#define SIOREG_CF5 0x25 /* Configuration 5 */
+#define SIOREG_CFB 0x2B /* Configuration B */
+#define SIOREG_CFC 0x2C /* Configuration C */
+#define SIOREG_CFD 0x2D /* Configuration D */
#define SIOREG_ACT 0x30 /* Device activation */
#define SIOREG_MAP 0x50 /* I/O or memory mapping */
#define SIOREG_IOBASE 0x60 /* I/O base address */
#define BANK_FM(nr) (nr)
#define BANK_FT(nr) (0x08 + (nr))
#define BANK_FC(nr) (0x10 + (nr) * 2)
+#define BANK_TM(nr) (nr)
+#define BANK_VM(nr) (0x08 + (nr))
/*
* I/O access functions
return ((1350000UL + val / 2) / val) << 2;
}
+/*
+ * PWM registers and conversions
+ */
+
+#define PC87427_REG_PWM_ENABLE 0x10
+#define PC87427_REG_PWM_DUTY 0x12
+
+#define PWM_ENABLE_MODE_MASK (7 << 4)
+#define PWM_ENABLE_CTLEN (1 << 0)
+
+#define PWM_MODE_MANUAL (0 << 4)
+#define PWM_MODE_AUTO (1 << 4)
+#define PWM_MODE_OFF (2 << 4)
+#define PWM_MODE_ON (7 << 4)
+
+/* Dedicated function to read all registers related to a given PWM output.
+ This saves us quite a few locks and bank selections.
+ Must be called with data->lock held.
+ nr is from 0 to 3 */
+static void pc87427_readall_pwm(struct pc87427_data *data, u8 nr)
+{
+ int iobase = data->address[LD_FAN];
+
+ outb(BANK_FC(nr), iobase + PC87427_REG_BANK);
+ data->pwm_enable[nr] = inb(iobase + PC87427_REG_PWM_ENABLE);
+ data->pwm[nr] = inb(iobase + PC87427_REG_PWM_DUTY);
+}
+
+static inline int pwm_enable_from_reg(u8 reg)
+{
+ switch (reg & PWM_ENABLE_MODE_MASK) {
+ case PWM_MODE_ON:
+ return 0;
+ case PWM_MODE_MANUAL:
+ case PWM_MODE_OFF:
+ return 1;
+ case PWM_MODE_AUTO:
+ return 2;
+ default:
+ return -EPROTO;
+ }
+}
+
+static inline u8 pwm_enable_to_reg(unsigned long val, u8 pwmval)
+{
+ switch (val) {
+ default:
+ return PWM_MODE_ON;
+ case 1:
+ return pwmval ? PWM_MODE_MANUAL : PWM_MODE_OFF;
+ case 2:
+ return PWM_MODE_AUTO;
+ }
+}
+
+/*
+ * Temperature registers and conversions
+ */
+
+#define PC87427_REG_TEMP_STATUS 0x10
+#define PC87427_REG_TEMP 0x14
+#define PC87427_REG_TEMP_MAX 0x18
+#define PC87427_REG_TEMP_MIN 0x19
+#define PC87427_REG_TEMP_CRIT 0x1a
+#define PC87427_REG_TEMP_TYPE 0x1d
+
+#define TEMP_STATUS_CHANEN (1 << 0)
+#define TEMP_STATUS_LOWFLG (1 << 1)
+#define TEMP_STATUS_HIGHFLG (1 << 2)
+#define TEMP_STATUS_CRITFLG (1 << 3)
+#define TEMP_STATUS_SENSERR (1 << 5)
+#define TEMP_TYPE_MASK (3 << 5)
+
+#define TEMP_TYPE_THERMISTOR (1 << 5)
+#define TEMP_TYPE_REMOTE_DIODE (2 << 5)
+#define TEMP_TYPE_LOCAL_DIODE (3 << 5)
+
+/* Dedicated function to read all registers related to a given temperature
+ input. This saves us quite a few locks and bank selections.
+ Must be called with data->lock held.
+ nr is from 0 to 5 */
+static void pc87427_readall_temp(struct pc87427_data *data, u8 nr)
+{
+ int iobase = data->address[LD_TEMP];
+
+ outb(BANK_TM(nr), iobase + PC87427_REG_BANK);
+ data->temp[nr] = le16_to_cpu(inw(iobase + PC87427_REG_TEMP));
+ data->temp_max[nr] = inb(iobase + PC87427_REG_TEMP_MAX);
+ data->temp_min[nr] = inb(iobase + PC87427_REG_TEMP_MIN);
+ data->temp_crit[nr] = inb(iobase + PC87427_REG_TEMP_CRIT);
+ data->temp_type[nr] = inb(iobase + PC87427_REG_TEMP_TYPE);
+ data->temp_status[nr] = inb(iobase + PC87427_REG_TEMP_STATUS);
+ /* Clear fan alarm bits */
+ outb(data->temp_status[nr], iobase + PC87427_REG_TEMP_STATUS);
+}
+
+static inline unsigned int temp_type_from_reg(u8 reg)
+{
+ switch (reg & TEMP_TYPE_MASK) {
+ case TEMP_TYPE_THERMISTOR:
+ return 4;
+ case TEMP_TYPE_REMOTE_DIODE:
+ case TEMP_TYPE_LOCAL_DIODE:
+ return 3;
+ default:
+ return 0;
+ }
+}
+
+/* We assume 8-bit thermal sensors; 9-bit thermal sensors are possible
+ too, but I have no idea how to figure out when they are used. */
+static inline long temp_from_reg(s16 reg)
+{
+ return reg * 1000 / 256;
+}
+
+static inline long temp_from_reg8(s8 reg)
+{
+ return reg * 1000;
+}
+
/*
* Data interface
*/
continue;
pc87427_readall_fan(data, i);
}
+
+ /* PWM outputs */
+ for (i = 0; i < 4; i++) {
+ if (!(data->pwm_enabled & (1 << i)))
+ continue;
+ pc87427_readall_pwm(data, i);
+ }
+
+ /* Temperature channels */
+ for (i = 0; i < 6; i++) {
+ if (!(data->temp_enabled & (1 << i)))
+ continue;
+ pc87427_readall_temp(data, i);
+ }
+
data->last_updated = jiffies;
done:
static ssize_t show_fan_input(struct device *dev, struct device_attribute
*devattr, char *buf)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct pc87427_data *data = pc87427_update_device(dev);
- int nr = attr->index;
+ int nr = to_sensor_dev_attr(devattr)->index;
return sprintf(buf, "%lu\n", fan_from_reg(data->fan[nr]));
}
static ssize_t show_fan_min(struct device *dev, struct device_attribute
*devattr, char *buf)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct pc87427_data *data = pc87427_update_device(dev);
- int nr = attr->index;
+ int nr = to_sensor_dev_attr(devattr)->index;
return sprintf(buf, "%lu\n", fan_from_reg(data->fan_min[nr]));
}
static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
*devattr, char *buf)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct pc87427_data *data = pc87427_update_device(dev);
- int nr = attr->index;
+ int nr = to_sensor_dev_attr(devattr)->index;
return sprintf(buf, "%d\n", !!(data->fan_status[nr]
& FAN_STATUS_LOSPD));
static ssize_t show_fan_fault(struct device *dev, struct device_attribute
*devattr, char *buf)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct pc87427_data *data = pc87427_update_device(dev);
- int nr = attr->index;
+ int nr = to_sensor_dev_attr(devattr)->index;
return sprintf(buf, "%d\n", !!(data->fan_status[nr]
& FAN_STATUS_STALL));
*devattr, const char *buf, size_t count)
{
struct pc87427_data *data = dev_get_drvdata(dev);
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- int nr = attr->index;
- unsigned long val = simple_strtoul(buf, NULL, 10);
+ int nr = to_sensor_dev_attr(devattr)->index;
+ unsigned long val;
int iobase = data->address[LD_FAN];
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
mutex_lock(&data->lock);
outb(BANK_FM(nr), iobase + PC87427_REG_BANK);
/* The low speed limit registers are read-only while monitoring
{ .attrs = pc87427_attributes_fan[7] },
};
+/* Must be called with data->lock held and pc87427_readall_pwm() freshly
+ called */
+static void update_pwm_enable(struct pc87427_data *data, int nr, u8 mode)
+{
+ int iobase = data->address[LD_FAN];
+ data->pwm_enable[nr] &= ~PWM_ENABLE_MODE_MASK;
+ data->pwm_enable[nr] |= mode;
+ outb(data->pwm_enable[nr], iobase + PC87427_REG_PWM_ENABLE);
+}
+
+static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+ int pwm_enable;
+
+ pwm_enable = pwm_enable_from_reg(data->pwm_enable[nr]);
+ if (pwm_enable < 0)
+ return pwm_enable;
+ return sprintf(buf, "%d\n", pwm_enable);
+}
+
+static ssize_t set_pwm_enable(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct pc87427_data *data = dev_get_drvdata(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val) < 0 || val > 2)
+ return -EINVAL;
+ /* Can't go to automatic mode if it isn't configured */
+ if (val == 2 && !(data->pwm_auto_ok & (1 << nr)))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ pc87427_readall_pwm(data, nr);
+ update_pwm_enable(data, nr, pwm_enable_to_reg(val, data->pwm[nr]));
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", (int)data->pwm[nr]);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct pc87427_data *data = dev_get_drvdata(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+ unsigned long val;
+ int iobase = data->address[LD_FAN];
+ u8 mode;
+
+ if (strict_strtoul(buf, 10, &val) < 0 || val > 0xff)
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ pc87427_readall_pwm(data, nr);
+ mode = data->pwm_enable[nr] & PWM_ENABLE_MODE_MASK;
+ if (mode != PWM_MODE_MANUAL && mode != PWM_MODE_OFF) {
+ dev_notice(dev, "Can't set PWM%d duty cycle while not in "
+ "manual mode\n", nr + 1);
+ mutex_unlock(&data->lock);
+ return -EPERM;
+ }
+
+ /* We may have to change the mode */
+ if (mode == PWM_MODE_MANUAL && val == 0) {
+ /* Transition from Manual to Off */
+ update_pwm_enable(data, nr, PWM_MODE_OFF);
+ mode = PWM_MODE_OFF;
+ dev_dbg(dev, "Switching PWM%d from %s to %s\n", nr + 1,
+ "manual", "off");
+ } else if (mode == PWM_MODE_OFF && val != 0) {
+ /* Transition from Off to Manual */
+ update_pwm_enable(data, nr, PWM_MODE_MANUAL);
+ mode = PWM_MODE_MANUAL;
+ dev_dbg(dev, "Switching PWM%d from %s to %s\n", nr + 1,
+ "off", "manual");
+ }
+
+ data->pwm[nr] = val;
+ if (mode == PWM_MODE_MANUAL)
+ outb(val, iobase + PC87427_REG_PWM_DUTY);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+ show_pwm_enable, set_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
+ show_pwm_enable, set_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO,
+ show_pwm_enable, set_pwm_enable, 2);
+static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO,
+ show_pwm_enable, set_pwm_enable, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3);
+
+static struct attribute *pc87427_attributes_pwm[4][3] = {
+ {
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_pwm4_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm4.dev_attr.attr,
+ NULL
+ }
+};
+
+static const struct attribute_group pc87427_group_pwm[4] = {
+ { .attrs = pc87427_attributes_pwm[0] },
+ { .attrs = pc87427_attributes_pwm[1] },
+ { .attrs = pc87427_attributes_pwm[2] },
+ { .attrs = pc87427_attributes_pwm[3] },
+};
+
+static ssize_t show_temp_input(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%ld\n", temp_from_reg(data->temp[nr]));
+}
+
+static ssize_t show_temp_min(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%ld\n", temp_from_reg8(data->temp_min[nr]));
+}
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%ld\n", temp_from_reg8(data->temp_max[nr]));
+}
+
+static ssize_t show_temp_crit(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%ld\n", temp_from_reg8(data->temp_crit[nr]));
+}
+
+static ssize_t show_temp_type(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%u\n", temp_type_from_reg(data->temp_type[nr]));
+}
+
+static ssize_t show_temp_min_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", !!(data->temp_status[nr]
+ & TEMP_STATUS_LOWFLG));
+}
+
+static ssize_t show_temp_max_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", !!(data->temp_status[nr]
+ & TEMP_STATUS_HIGHFLG));
+}
+
+static ssize_t show_temp_crit_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", !!(data->temp_status[nr]
+ & TEMP_STATUS_CRITFLG));
+}
+
+static ssize_t show_temp_fault(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", !!(data->temp_status[nr]
+ & TEMP_STATUS_SENSERR));
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_input, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_input, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp_input, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_temp_input, NULL, 5);
+
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp_min, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp_min, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp_min, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_min, S_IRUGO, show_temp_min, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_min, S_IRUGO, show_temp_min, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_min, S_IRUGO, show_temp_min, NULL, 5);
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp_max, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp_max, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO, show_temp_max, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_max, S_IRUGO, show_temp_max, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_max, S_IRUGO, show_temp_max, NULL, 5);
+
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp_crit, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_crit, S_IRUGO, show_temp_crit, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_crit, S_IRUGO, show_temp_crit, NULL, 5);
+
+static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_type, S_IRUGO, show_temp_type, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_type, S_IRUGO, show_temp_type, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_type, S_IRUGO, show_temp_type, NULL, 5);
+
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO,
+ show_temp_min_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO,
+ show_temp_min_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO,
+ show_temp_min_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO,
+ show_temp_min_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_min_alarm, S_IRUGO,
+ show_temp_min_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_min_alarm, S_IRUGO,
+ show_temp_min_alarm, NULL, 5);
+
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
+ show_temp_max_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO,
+ show_temp_max_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO,
+ show_temp_max_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO,
+ show_temp_max_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_max_alarm, S_IRUGO,
+ show_temp_max_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_max_alarm, S_IRUGO,
+ show_temp_max_alarm, NULL, 5);
+
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
+ show_temp_crit_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO,
+ show_temp_crit_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO,
+ show_temp_crit_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_crit_alarm, S_IRUGO,
+ show_temp_crit_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_crit_alarm, S_IRUGO,
+ show_temp_crit_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_crit_alarm, S_IRUGO,
+ show_temp_crit_alarm, NULL, 5);
+
+static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_temp_fault, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_temp_fault, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_fault, S_IRUGO, show_temp_fault, NULL, 5);
+
+static struct attribute *pc87427_attributes_temp[6][10] = {
+ {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_type.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_type.dev_attr.attr,
+ &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_type.dev_attr.attr,
+ &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_min.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit.dev_attr.attr,
+ &sensor_dev_attr_temp4_type.dev_attr.attr,
+ &sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp5_input.dev_attr.attr,
+ &sensor_dev_attr_temp5_min.dev_attr.attr,
+ &sensor_dev_attr_temp5_max.dev_attr.attr,
+ &sensor_dev_attr_temp5_crit.dev_attr.attr,
+ &sensor_dev_attr_temp5_type.dev_attr.attr,
+ &sensor_dev_attr_temp5_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp6_input.dev_attr.attr,
+ &sensor_dev_attr_temp6_min.dev_attr.attr,
+ &sensor_dev_attr_temp6_max.dev_attr.attr,
+ &sensor_dev_attr_temp6_crit.dev_attr.attr,
+ &sensor_dev_attr_temp6_type.dev_attr.attr,
+ &sensor_dev_attr_temp6_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp6_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp6_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp6_fault.dev_attr.attr,
+ NULL
+ }
+};
+
+static const struct attribute_group pc87427_group_temp[6] = {
+ { .attrs = pc87427_attributes_temp[0] },
+ { .attrs = pc87427_attributes_temp[1] },
+ { .attrs = pc87427_attributes_temp[2] },
+ { .attrs = pc87427_attributes_temp[3] },
+ { .attrs = pc87427_attributes_temp[4] },
+ { .attrs = pc87427_attributes_temp[5] },
+};
+
static ssize_t show_name(struct device *dev, struct device_attribute
*devattr, char *buf)
{
* Device detection, attach and detach
*/
+static void pc87427_release_regions(struct platform_device *pdev, int count)
+{
+ struct resource *res;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_IO, i);
+ release_region(res->start, resource_size(res));
+ }
+}
+
+static int __devinit pc87427_request_regions(struct platform_device *pdev,
+ int count)
+{
+ struct resource *res;
+ int i, err = 0;
+
+ for (i = 0; i < count; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_IO, i);
+ if (!res) {
+ err = -ENOENT;
+ dev_err(&pdev->dev, "Missing resource #%d\n", i);
+ break;
+ }
+ if (!request_region(res->start, resource_size(res), DRVNAME)) {
+ err = -EBUSY;
+ dev_err(&pdev->dev,
+ "Failed to request region 0x%lx-0x%lx\n",
+ (unsigned long)res->start,
+ (unsigned long)res->end);
+ break;
+ }
+ }
+
+ if (err && i)
+ pc87427_release_regions(pdev, i);
+
+ return err;
+}
+
static void __devinit pc87427_init_device(struct device *dev)
{
+ struct pc87427_sio_data *sio_data = dev->platform_data;
struct pc87427_data *data = dev_get_drvdata(dev);
int i;
u8 reg;
/* The FMC module should be ready */
reg = pc87427_read8(data, LD_FAN, PC87427_REG_BANK);
if (!(reg & 0x80))
- dev_warn(dev, "FMC module not ready!\n");
+ dev_warn(dev, "%s module not ready!\n", "FMC");
/* Check which fans are enabled */
for (i = 0; i < 8; i++) {
+ if (!(sio_data->has_fanin & (1 << i))) /* Not wired */
+ continue;
reg = pc87427_read8_bank(data, LD_FAN, BANK_FM(i),
PC87427_REG_FAN_STATUS);
if (reg & FAN_STATUS_MONEN)
}
if (!data->fan_enabled) {
- dev_dbg(dev, "Enabling all fan inputs\n");
- for (i = 0; i < 8; i++)
+ dev_dbg(dev, "Enabling monitoring of all fans\n");
+ for (i = 0; i < 8; i++) {
+ if (!(sio_data->has_fanin & (1 << i))) /* Not wired */
+ continue;
pc87427_write8_bank(data, LD_FAN, BANK_FM(i),
PC87427_REG_FAN_STATUS,
FAN_STATUS_MONEN);
- data->fan_enabled = 0xff;
+ }
+ data->fan_enabled = sio_data->has_fanin;
+ }
+
+ /* Check which PWM outputs are enabled */
+ for (i = 0; i < 4; i++) {
+ if (!(sio_data->has_fanout & (1 << i))) /* Not wired */
+ continue;
+ reg = pc87427_read8_bank(data, LD_FAN, BANK_FC(i),
+ PC87427_REG_PWM_ENABLE);
+ if (reg & PWM_ENABLE_CTLEN)
+ data->pwm_enabled |= (1 << i);
+
+ /* We don't expose an interface to reconfigure the automatic
+ fan control mode, so only allow to return to this mode if
+ it was originally set. */
+ if ((reg & PWM_ENABLE_MODE_MASK) == PWM_MODE_AUTO) {
+ dev_dbg(dev, "PWM%d is in automatic control mode\n",
+ i + 1);
+ data->pwm_auto_ok |= (1 << i);
+ }
+ }
+
+ /* The HMC module should be ready */
+ reg = pc87427_read8(data, LD_TEMP, PC87427_REG_BANK);
+ if (!(reg & 0x80))
+ dev_warn(dev, "%s module not ready!\n", "HMC");
+
+ /* Check which temperature channels are enabled */
+ for (i = 0; i < 6; i++) {
+ reg = pc87427_read8_bank(data, LD_TEMP, BANK_TM(i),
+ PC87427_REG_TEMP_STATUS);
+ if (reg & TEMP_STATUS_CHANEN)
+ data->temp_enabled |= (1 << i);
+ }
+}
+
+static void pc87427_remove_files(struct device *dev)
+{
+ struct pc87427_data *data = dev_get_drvdata(dev);
+ int i;
+
+ device_remove_file(dev, &dev_attr_name);
+ for (i = 0; i < 8; i++) {
+ if (!(data->fan_enabled & (1 << i)))
+ continue;
+ sysfs_remove_group(&dev->kobj, &pc87427_group_fan[i]);
+ }
+ for (i = 0; i < 4; i++) {
+ if (!(data->pwm_enabled & (1 << i)))
+ continue;
+ sysfs_remove_group(&dev->kobj, &pc87427_group_pwm[i]);
+ }
+ for (i = 0; i < 6; i++) {
+ if (!(data->temp_enabled & (1 << i)))
+ continue;
+ sysfs_remove_group(&dev->kobj, &pc87427_group_temp[i]);
}
}
static int __devinit pc87427_probe(struct platform_device *pdev)
{
+ struct pc87427_sio_data *sio_data = pdev->dev.platform_data;
struct pc87427_data *data;
- struct resource *res;
- int i, err;
+ int i, err, res_count;
- if (!(data = kzalloc(sizeof(struct pc87427_data), GFP_KERNEL))) {
+ data = kzalloc(sizeof(struct pc87427_data), GFP_KERNEL);
+ if (!data) {
err = -ENOMEM;
printk(KERN_ERR DRVNAME ": Out of memory\n");
goto exit;
}
- /* This will need to be revisited when we add support for
- temperature and voltage monitoring. */
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!request_region(res->start, resource_size(res), DRVNAME)) {
- err = -EBUSY;
- dev_err(&pdev->dev, "Failed to request region 0x%lx-0x%lx\n",
- (unsigned long)res->start, (unsigned long)res->end);
+ data->address[0] = sio_data->address[0];
+ data->address[1] = sio_data->address[1];
+ res_count = (data->address[0] != 0) + (data->address[1] != 0);
+
+ err = pc87427_request_regions(pdev, res_count);
+ if (err)
goto exit_kfree;
- }
- data->address[0] = res->start;
mutex_init(&data->lock);
data->name = "pc87427";
pc87427_init_device(&pdev->dev);
/* Register sysfs hooks */
- if ((err = device_create_file(&pdev->dev, &dev_attr_name)))
+ err = device_create_file(&pdev->dev, &dev_attr_name);
+ if (err)
goto exit_release_region;
for (i = 0; i < 8; i++) {
if (!(data->fan_enabled & (1 << i)))
continue;
- if ((err = sysfs_create_group(&pdev->dev.kobj,
- &pc87427_group_fan[i])))
+ err = sysfs_create_group(&pdev->dev.kobj,
+ &pc87427_group_fan[i]);
+ if (err)
+ goto exit_remove_files;
+ }
+ for (i = 0; i < 4; i++) {
+ if (!(data->pwm_enabled & (1 << i)))
+ continue;
+ err = sysfs_create_group(&pdev->dev.kobj,
+ &pc87427_group_pwm[i]);
+ if (err)
+ goto exit_remove_files;
+ }
+ for (i = 0; i < 6; i++) {
+ if (!(data->temp_enabled & (1 << i)))
+ continue;
+ err = sysfs_create_group(&pdev->dev.kobj,
+ &pc87427_group_temp[i]);
+ if (err)
goto exit_remove_files;
}
return 0;
exit_remove_files:
- for (i = 0; i < 8; i++) {
- if (!(data->fan_enabled & (1 << i)))
- continue;
- sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
- }
+ pc87427_remove_files(&pdev->dev);
exit_release_region:
- release_region(res->start, resource_size(res));
+ pc87427_release_regions(pdev, res_count);
exit_kfree:
platform_set_drvdata(pdev, NULL);
kfree(data);
static int __devexit pc87427_remove(struct platform_device *pdev)
{
struct pc87427_data *data = platform_get_drvdata(pdev);
- struct resource *res;
- int i;
+ int res_count;
+
+ res_count = (data->address[0] != 0) + (data->address[1] != 0);
hwmon_device_unregister(data->hwmon_dev);
- device_remove_file(&pdev->dev, &dev_attr_name);
- for (i = 0; i < 8; i++) {
- if (!(data->fan_enabled & (1 << i)))
- continue;
- sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
- }
+ pc87427_remove_files(&pdev->dev);
platform_set_drvdata(pdev, NULL);
kfree(data);
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- release_region(res->start, resource_size(res));
+ pc87427_release_regions(pdev, res_count);
return 0;
}
.remove = __devexit_p(pc87427_remove),
};
-static int __init pc87427_device_add(unsigned short address)
+static int __init pc87427_device_add(const struct pc87427_sio_data *sio_data)
{
- struct resource res = {
- .start = address,
- .end = address + REGION_LENGTH - 1,
- .name = logdev_str[0],
- .flags = IORESOURCE_IO,
+ struct resource res[2] = {
+ { .flags = IORESOURCE_IO },
+ { .flags = IORESOURCE_IO },
};
- int err;
+ int err, i, res_count;
- err = acpi_check_resource_conflict(&res);
- if (err)
- goto exit;
+ res_count = 0;
+ for (i = 0; i < 2; i++) {
+ if (!sio_data->address[i])
+ continue;
+ res[res_count].start = sio_data->address[i];
+ res[res_count].end = sio_data->address[i] + REGION_LENGTH - 1;
+ res[res_count].name = logdev_str[i];
- pdev = platform_device_alloc(DRVNAME, address);
+ err = acpi_check_resource_conflict(&res[res_count]);
+ if (err)
+ goto exit;
+
+ res_count++;
+ }
+
+ pdev = platform_device_alloc(DRVNAME, res[0].start);
if (!pdev) {
err = -ENOMEM;
printk(KERN_ERR DRVNAME ": Device allocation failed\n");
goto exit;
}
- err = platform_device_add_resources(pdev, &res, 1);
+ err = platform_device_add_resources(pdev, res, res_count);
if (err) {
printk(KERN_ERR DRVNAME ": Device resource addition failed "
"(%d)\n", err);
goto exit_device_put;
}
+ err = platform_device_add_data(pdev, sio_data,
+ sizeof(struct pc87427_sio_data));
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ goto exit_device_put;
+ }
+
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
return err;
}
-static int __init pc87427_find(int sioaddr, unsigned short *address)
+static int __init pc87427_find(int sioaddr, struct pc87427_sio_data *sio_data)
{
u16 val;
+ u8 cfg, cfg_b;
int i, err = 0;
/* Identify device */
}
for (i = 0; i < 2; i++) {
- address[i] = 0;
+ sio_data->address[i] = 0;
/* Select logical device */
superio_outb(sioaddr, SIOREG_LDSEL, logdev[i]);
"for logical device 0x%02x\n", logdev[i]);
continue;
}
- address[i] = val;
+ sio_data->address[i] = val;
}
+ /* No point in loading the driver if everything is disabled */
+ if (!sio_data->address[0] && !sio_data->address[1]) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ /* Check which fan inputs are wired */
+ sio_data->has_fanin = (1 << 2) | (1 << 3); /* FANIN2, FANIN3 */
+
+ cfg = superio_inb(sioaddr, SIOREG_CF2);
+ if (!(cfg & (1 << 3)))
+ sio_data->has_fanin |= (1 << 0); /* FANIN0 */
+ if (!(cfg & (1 << 2)))
+ sio_data->has_fanin |= (1 << 4); /* FANIN4 */
+
+ cfg = superio_inb(sioaddr, SIOREG_CFD);
+ if (!(cfg & (1 << 0)))
+ sio_data->has_fanin |= (1 << 1); /* FANIN1 */
+
+ cfg = superio_inb(sioaddr, SIOREG_CF4);
+ if (!(cfg & (1 << 0)))
+ sio_data->has_fanin |= (1 << 7); /* FANIN7 */
+ cfg_b = superio_inb(sioaddr, SIOREG_CFB);
+ if (!(cfg & (1 << 1)) && (cfg_b & (1 << 3)))
+ sio_data->has_fanin |= (1 << 5); /* FANIN5 */
+ cfg = superio_inb(sioaddr, SIOREG_CF3);
+ if ((cfg & (1 << 3)) && !(cfg_b & (1 << 5)))
+ sio_data->has_fanin |= (1 << 6); /* FANIN6 */
+
+ /* Check which fan outputs are wired */
+ sio_data->has_fanout = (1 << 0); /* FANOUT0 */
+ if (cfg_b & (1 << 0))
+ sio_data->has_fanout |= (1 << 3); /* FANOUT3 */
+
+ cfg = superio_inb(sioaddr, SIOREG_CFC);
+ if (!(cfg & (1 << 4))) {
+ if (cfg_b & (1 << 1))
+ sio_data->has_fanout |= (1 << 1); /* FANOUT1 */
+ if (cfg_b & (1 << 2))
+ sio_data->has_fanout |= (1 << 2); /* FANOUT2 */
+ }
+
+ /* FANOUT1 and FANOUT2 can each be routed to 2 different pins */
+ cfg = superio_inb(sioaddr, SIOREG_CF5);
+ if (cfg & (1 << 6))
+ sio_data->has_fanout |= (1 << 1); /* FANOUT1 */
+ if (cfg & (1 << 5))
+ sio_data->has_fanout |= (1 << 2); /* FANOUT2 */
+
exit:
superio_exit(sioaddr);
return err;
static int __init pc87427_init(void)
{
int err;
- unsigned short address[2];
-
- if (pc87427_find(0x2e, address)
- && pc87427_find(0x4e, address))
- return -ENODEV;
+ struct pc87427_sio_data sio_data;
- /* For now the driver only handles fans so we only care about the
- first address. */
- if (!address[0])
+ if (pc87427_find(0x2e, &sio_data)
+ && pc87427_find(0x4e, &sio_data))
return -ENODEV;
err = platform_driver_register(&pc87427_driver);
goto exit;
/* Sets global pdev as a side effect */
- err = pc87427_device_add(address[0]);
+ err = pc87427_device_add(&sio_data);
if (err)
goto exit_driver;
.attrs = env_attributes,
};
-static int __devinit env_probe(struct of_device *op,
+static int __devinit env_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct env *p = kzalloc(sizeof(*p), GFP_KERNEL);
goto out;
}
-static int __devexit env_remove(struct of_device *op)
+static int __devexit env_remove(struct platform_device *op)
{
struct env *p = dev_get_drvdata(&op->dev);
#define DRVNAME "via_cputemp"
-enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME } SHOW;
+enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME };
/*
* Functions declaration
w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3
w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3
w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3
+ w83667hg-b 9 5 3 3 0xb350 0xc1 0x5ca3
*/
#include <linux/module.h>
#include <linux/io.h>
#include "lm75.h"
-enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg };
+enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg, w83667hg_b };
/* used to set data->name = w83627ehf_device_names[data->sio_kind] */
static const char * w83627ehf_device_names[] = {
"w83627dhg",
"w83627dhg",
"w83667hg",
+ "w83667hg",
};
static unsigned short force_id;
#define SIO_W83627DHG_ID 0xa020
#define SIO_W83627DHG_P_ID 0xb070
#define SIO_W83667HG_ID 0xa510
+#define SIO_W83667HG_B_ID 0xb350
#define SIO_ID_MASK 0xFFF0
static inline void
static const u8 W83627EHF_REG_FAN_START_OUTPUT[] = { 0x0a, 0x0b, 0x16, 0x65 };
static const u8 W83627EHF_REG_FAN_STOP_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 };
static const u8 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0c, 0x0d, 0x17, 0x66 };
-static const u8 W83627EHF_REG_FAN_MAX_OUTPUT[] = { 0xff, 0x67, 0xff, 0x69 };
-static const u8 W83627EHF_REG_FAN_STEP_OUTPUT[] = { 0xff, 0x68, 0xff, 0x6a };
+
+static const u8 W83627EHF_REG_FAN_MAX_OUTPUT_COMMON[]
+ = { 0xff, 0x67, 0xff, 0x69 };
+static const u8 W83627EHF_REG_FAN_STEP_OUTPUT_COMMON[]
+ = { 0xff, 0x68, 0xff, 0x6a };
+
+static const u8 W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B[] = { 0x67, 0x69, 0x6b };
+static const u8 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B[] = { 0x68, 0x6a, 0x6c };
/*
* Conversions
struct device *hwmon_dev;
struct mutex lock;
+ const u8 *REG_FAN_START_OUTPUT;
+ const u8 *REG_FAN_STOP_OUTPUT;
+ const u8 *REG_FAN_MAX_OUTPUT;
+ const u8 *REG_FAN_STEP_OUTPUT;
+
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
}
}
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < data->pwm_num; i++) {
+ if (!(data->has_fan & (1 << i)))
+ continue;
+
/* pwmcfg, tolerance mapped for i=0, i=1 to same reg */
if (i != 1) {
pwmcfg = w83627ehf_read_value(data,
W83627EHF_REG_FAN_STOP_OUTPUT[i]);
data->fan_stop_time[i] = w83627ehf_read_value(data,
W83627EHF_REG_FAN_STOP_TIME[i]);
+
+ if (data->REG_FAN_MAX_OUTPUT[i] != 0xff)
+ data->fan_max_output[i] =
+ w83627ehf_read_value(data,
+ data->REG_FAN_MAX_OUTPUT[i]);
+
+ if (data->REG_FAN_STEP_OUTPUT[i] != 0xff)
+ data->fan_step_output[i] =
+ w83627ehf_read_value(data,
+ data->REG_FAN_STEP_OUTPUT[i]);
+
data->target_temp[i] =
w83627ehf_read_value(data,
W83627EHF_REG_TARGET[i]) &
u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 1, 255); \
mutex_lock(&data->update_lock); \
data->reg[nr] = val; \
- w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \
+ w83627ehf_write_value(data, data->REG_##REG[nr], val); \
mutex_unlock(&data->update_lock); \
return count; \
}
store_fan_stop_output, 1),
SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
store_fan_stop_output, 2),
+};
- /* pwm1 and pwm3 don't support max and step settings */
+
+/*
+ * pwm1 and pwm3 don't support max and step settings on all chips.
+ * Need to check support while generating/removing attribute files.
+ */
+static struct sensor_device_attribute sda_sf3_max_step_arrays[] = {
+ SENSOR_ATTR(pwm1_max_output, S_IWUSR | S_IRUGO, show_fan_max_output,
+ store_fan_max_output, 0),
+ SENSOR_ATTR(pwm1_step_output, S_IWUSR | S_IRUGO, show_fan_step_output,
+ store_fan_step_output, 0),
SENSOR_ATTR(pwm2_max_output, S_IWUSR | S_IRUGO, show_fan_max_output,
store_fan_max_output, 1),
SENSOR_ATTR(pwm2_step_output, S_IWUSR | S_IRUGO, show_fan_step_output,
store_fan_step_output, 1),
+ SENSOR_ATTR(pwm3_max_output, S_IWUSR | S_IRUGO, show_fan_max_output,
+ store_fan_max_output, 2),
+ SENSOR_ATTR(pwm3_step_output, S_IWUSR | S_IRUGO, show_fan_step_output,
+ store_fan_step_output, 2),
};
static ssize_t
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++)
device_remove_file(dev, &sda_sf3_arrays[i].dev_attr);
+ for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) {
+ struct sensor_device_attribute *attr =
+ &sda_sf3_max_step_arrays[i];
+ if (data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff)
+ device_remove_file(dev, &attr->dev_attr);
+ }
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
for (i = 0; i < data->in_num; i++) {
/* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9;
/* 667HG has 3 pwms */
- data->pwm_num = (sio_data->kind == w83667hg) ? 3 : 4;
+ data->pwm_num = (sio_data->kind == w83667hg
+ || sio_data->kind == w83667hg_b) ? 3 : 4;
/* Check temp3 configuration bit for 667HG */
- if (sio_data->kind == w83667hg) {
+ if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
data->temp3_disable = w83627ehf_read_value(data,
W83627EHF_REG_TEMP_CONFIG[1]) & 0x01;
data->in6_skip = !data->temp3_disable;
}
+ data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT;
+ data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT;
+ if (sio_data->kind == w83667hg_b) {
+ data->REG_FAN_MAX_OUTPUT =
+ W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B;
+ data->REG_FAN_STEP_OUTPUT =
+ W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B;
+ } else {
+ data->REG_FAN_MAX_OUTPUT =
+ W83627EHF_REG_FAN_MAX_OUTPUT_COMMON;
+ data->REG_FAN_STEP_OUTPUT =
+ W83627EHF_REG_FAN_STEP_OUTPUT_COMMON;
+ }
+
/* Initialize the chip */
w83627ehf_init_device(data);
data->vrm = vid_which_vrm();
superio_enter(sio_data->sioreg);
/* Read VID value */
- if (sio_data->kind == w83667hg) {
+ if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
/* W83667HG has different pins for VID input and output, so
we can get the VID input values directly at logical device D
0xe3. */
}
/* fan4 and fan5 share some pins with the GPIO and serial flash */
- if (sio_data->kind == w83667hg) {
+ if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
} else {
&sda_sf3_arrays[i].dev_attr)))
goto exit_remove;
+ for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) {
+ struct sensor_device_attribute *attr =
+ &sda_sf3_max_step_arrays[i];
+ if (data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff) {
+ err = device_create_file(dev, &attr->dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+ }
/* if fan4 is enabled create the sf3 files for it */
if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4)
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) {
static const char __initdata sio_name_W83627DHG[] = "W83627DHG";
static const char __initdata sio_name_W83627DHG_P[] = "W83627DHG-P";
static const char __initdata sio_name_W83667HG[] = "W83667HG";
+ static const char __initdata sio_name_W83667HG_B[] = "W83667HG-B";
u16 val;
const char *sio_name;
sio_data->kind = w83667hg;
sio_name = sio_name_W83667HG;
break;
+ case SIO_W83667HG_B_ID:
+ sio_data->kind = w83667hg_b;
+ sio_name = sio_name_W83667HG_B;
+ break;
default:
if (val != 0xffff)
pr_debug(DRVNAME ": unsupported chip ID: 0x%04x\n",
This support is also available as a module. If so, the module
will be called i2c-dev.
+config I2C_MUX
+ tristate "I2C bus multiplexing support"
+ depends on EXPERIMENTAL
+ help
+ Say Y here if you want the I2C core to support the ability to
+ handle multiplexed I2C bus topologies, by presenting each
+ multiplexed segment as a I2C adapter.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-mux.
+
+source drivers/i2c/muxes/Kconfig
+
config I2C_HELPER_AUTO
bool "Autoselect pertinent helper modules"
default y
obj-$(CONFIG_I2C) += i2c-core.o
obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
-obj-y += algos/ busses/
+obj-$(CONFIG_I2C_MUX) += i2c-mux.o
+obj-y += algos/ busses/ muxes/
ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
EXTRA_CFLAGS += -DDEBUG
If you say yes to this option, support will be included for the
I2C interface from ST-Ericsson's Nomadik and Ux500 architectures.
+config I2C_NUC900
+ tristate "NUC900 I2C Driver"
+ depends on ARCH_W90X900
+ help
+ Say Y here to include support for I2C controller in the
+ Winbond/Nuvoton NUC900 based System-on-Chip devices.
+
config I2C_OCORES
tristate "OpenCores I2C Controller"
depends on EXPERIMENTAL
will be called i2c-pmcmsp.
config I2C_PNX
- tristate "I2C bus support for Philips PNX targets"
- depends on ARCH_PNX4008
+ tristate "I2C bus support for Philips PNX and NXP LPC targets"
+ depends on ARCH_PNX4008 || ARCH_LPC32XX
help
This driver supports the Philips IP3204 I2C IP block master and/or
slave controller
is necessary for systems where the PXA may be a target on the
I2C bus.
+config HAVE_S3C2410_I2C
+ bool
+ help
+ This will include I2C support for Samsung SoCs. If you want to
+ include I2C support for any machine, kindly select this in the
+ respective Kconfig file.
+
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
- depends on ARCH_S3C2410 || ARCH_S3C64XX
+ depends on HAVE_S3C2410_I2C
help
Say Y here to include support for I2C controller in the
- Samsung S3C2410 based System-on-Chip devices.
+ Samsung SoCs.
config I2C_S6000
tristate "S6000 I2C support"
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
- depends on SUPERH
+ depends on SUPERH || ARCH_SHMOBILE
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Renesas SH-Mobile processor.
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o
+obj-$(CONFIG_I2C_NUC900) += i2c-nuc900.o
obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
struct cpm_i2c {
char *base;
- struct of_device *ofdev;
+ struct platform_device *ofdev;
struct i2c_adapter adap;
uint dp_addr;
int version; /* CPM1=1, CPM2=2 */
static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
{
- struct of_device *ofdev = cpm->ofdev;
+ struct platform_device *ofdev = cpm->ofdev;
const u32 *data;
int len, ret, i;
void __iomem *i2c_base;
cpm_muram_free(cpm->i2c_addr);
}
-static int __devinit cpm_i2c_probe(struct of_device *ofdev,
+static int __devinit cpm_i2c_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
int result, len;
return result;
}
-static int __devexit cpm_i2c_remove(struct of_device *ofdev)
+static int __devexit cpm_i2c_remove(struct platform_device *ofdev)
{
struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev);
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
-
#include <mach/i2c.h>
/* ----- global defines ----------------------------------------------- */
#define DAVINCI_I2C_TIMEOUT (1*HZ)
+#define DAVINCI_I2C_MAX_TRIES 2
#define I2C_DAVINCI_INTR_ALL (DAVINCI_I2C_IMR_AAS | \
DAVINCI_I2C_IMR_SCD | \
DAVINCI_I2C_IMR_ARDY | \
#define DAVINCI_I2C_IVR_NACK 0x02
#define DAVINCI_I2C_IVR_AL 0x01
-#define DAVINCI_I2C_STR_BB (1 << 12)
-#define DAVINCI_I2C_STR_RSFULL (1 << 11)
-#define DAVINCI_I2C_STR_SCD (1 << 5)
-#define DAVINCI_I2C_STR_ARDY (1 << 2)
-#define DAVINCI_I2C_STR_NACK (1 << 1)
-#define DAVINCI_I2C_STR_AL (1 << 0)
-
-#define DAVINCI_I2C_MDR_NACK (1 << 15)
-#define DAVINCI_I2C_MDR_STT (1 << 13)
-#define DAVINCI_I2C_MDR_STP (1 << 11)
-#define DAVINCI_I2C_MDR_MST (1 << 10)
-#define DAVINCI_I2C_MDR_TRX (1 << 9)
-#define DAVINCI_I2C_MDR_XA (1 << 8)
-#define DAVINCI_I2C_MDR_RM (1 << 7)
-#define DAVINCI_I2C_MDR_IRS (1 << 5)
-
-#define DAVINCI_I2C_IMR_AAS (1 << 6)
-#define DAVINCI_I2C_IMR_SCD (1 << 5)
-#define DAVINCI_I2C_IMR_XRDY (1 << 4)
-#define DAVINCI_I2C_IMR_RRDY (1 << 3)
-#define DAVINCI_I2C_IMR_ARDY (1 << 2)
-#define DAVINCI_I2C_IMR_NACK (1 << 1)
-#define DAVINCI_I2C_IMR_AL (1 << 0)
-
-#define MOD_REG_BIT(val, mask, set) do { \
- if (set) { \
- val |= mask; \
- } else { \
- val &= ~mask; \
- } \
-} while (0)
+#define DAVINCI_I2C_STR_BB BIT(12)
+#define DAVINCI_I2C_STR_RSFULL BIT(11)
+#define DAVINCI_I2C_STR_SCD BIT(5)
+#define DAVINCI_I2C_STR_ARDY BIT(2)
+#define DAVINCI_I2C_STR_NACK BIT(1)
+#define DAVINCI_I2C_STR_AL BIT(0)
+
+#define DAVINCI_I2C_MDR_NACK BIT(15)
+#define DAVINCI_I2C_MDR_STT BIT(13)
+#define DAVINCI_I2C_MDR_STP BIT(11)
+#define DAVINCI_I2C_MDR_MST BIT(10)
+#define DAVINCI_I2C_MDR_TRX BIT(9)
+#define DAVINCI_I2C_MDR_XA BIT(8)
+#define DAVINCI_I2C_MDR_RM BIT(7)
+#define DAVINCI_I2C_MDR_IRS BIT(5)
+
+#define DAVINCI_I2C_IMR_AAS BIT(6)
+#define DAVINCI_I2C_IMR_SCD BIT(5)
+#define DAVINCI_I2C_IMR_XRDY BIT(4)
+#define DAVINCI_I2C_IMR_RRDY BIT(3)
+#define DAVINCI_I2C_IMR_ARDY BIT(2)
+#define DAVINCI_I2C_IMR_NACK BIT(1)
+#define DAVINCI_I2C_IMR_AL BIT(0)
struct davinci_i2c_dev {
struct device *dev;
u8 *buf;
size_t buf_len;
int irq;
+ int stop;
u8 terminate;
struct i2c_adapter adapter;
+#ifdef CONFIG_CPU_FREQ
+ struct completion xfr_complete;
+ struct notifier_block freq_transition;
+#endif
};
/* default platform data to use if not supplied in the platform_device */
return __raw_readw(i2c_dev->base + reg);
}
-/*
- * This functions configures I2C and brings I2C out of reset.
- * This function is called during I2C init function. This function
- * also gets called if I2C encounters any errors.
+/* Generate a pulse on the i2c clock pin. */
+static void generic_i2c_clock_pulse(unsigned int scl_pin)
+{
+ u16 i;
+
+ if (scl_pin) {
+ /* Send high and low on the SCL line */
+ for (i = 0; i < 9; i++) {
+ gpio_set_value(scl_pin, 0);
+ udelay(20);
+ gpio_set_value(scl_pin, 1);
+ udelay(20);
+ }
+ }
+}
+
+/* This routine does i2c bus recovery as specified in the
+ * i2c protocol Rev. 03 section 3.16 titled "Bus clear"
*/
-static int i2c_davinci_init(struct davinci_i2c_dev *dev)
+static void i2c_recover_bus(struct davinci_i2c_dev *dev)
+{
+ u32 flag = 0;
+ struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
+
+ dev_err(dev->dev, "initiating i2c bus recovery\n");
+ /* Send NACK to the slave */
+ flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+ flag |= DAVINCI_I2C_MDR_NACK;
+ /* write the data into mode register */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+ if (pdata)
+ generic_i2c_clock_pulse(pdata->scl_pin);
+ /* Send STOP */
+ flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+ flag |= DAVINCI_I2C_MDR_STP;
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+}
+
+static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev,
+ int val)
+{
+ u16 w;
+
+ w = davinci_i2c_read_reg(i2c_dev, DAVINCI_I2C_MDR_REG);
+ if (!val) /* put I2C into reset */
+ w &= ~DAVINCI_I2C_MDR_IRS;
+ else /* take I2C out of reset */
+ w |= DAVINCI_I2C_MDR_IRS;
+
+ davinci_i2c_write_reg(i2c_dev, DAVINCI_I2C_MDR_REG, w);
+}
+
+static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
{
struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
u16 psc;
u32 clkh;
u32 clkl;
u32 input_clock = clk_get_rate(dev->clk);
- u16 w;
-
- if (!pdata)
- pdata = &davinci_i2c_platform_data_default;
-
- /* put I2C into reset */
- w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
- MOD_REG_BIT(w, DAVINCI_I2C_MDR_IRS, 0);
- davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
/* NOTE: I2C Clock divider programming info
* As per I2C specs the following formulas provide prescaler
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
+ dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
+}
+
+/*
+ * This function configures I2C and brings I2C out of reset.
+ * This function is called during I2C init function. This function
+ * also gets called if I2C encounters any errors.
+ */
+static int i2c_davinci_init(struct davinci_i2c_dev *dev)
+{
+ struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
+
+ if (!pdata)
+ pdata = &davinci_i2c_platform_data_default;
+
+ /* put I2C into reset */
+ davinci_i2c_reset_ctrl(dev, 0);
+
+ /* compute clock dividers */
+ i2c_davinci_calc_clk_dividers(dev);
+
/* Respond at reserved "SMBus Host" slave address" (and zero);
* we seem to have no option to not respond...
*/
davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, 0x08);
- dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
dev_dbg(dev->dev, "PSC = %d\n",
davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
dev_dbg(dev->dev, "CLKL = %d\n",
pdata->bus_freq, pdata->bus_delay);
/* Take the I2C module out of reset: */
- w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
- MOD_REG_BIT(w, DAVINCI_I2C_MDR_IRS, 1);
- davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+ davinci_i2c_reset_ctrl(dev, 1);
/* Enable interrupts */
davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, I2C_DAVINCI_INTR_ALL);
char allow_sleep)
{
unsigned long timeout;
+ static u16 to_cnt;
timeout = jiffies + dev->adapter.timeout;
while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG)
& DAVINCI_I2C_STR_BB) {
- if (time_after(jiffies, timeout)) {
- dev_warn(dev->dev,
- "timeout waiting for bus ready\n");
- return -ETIMEDOUT;
+ if (to_cnt <= DAVINCI_I2C_MAX_TRIES) {
+ if (time_after(jiffies, timeout)) {
+ dev_warn(dev->dev,
+ "timeout waiting for bus ready\n");
+ to_cnt++;
+ return -ETIMEDOUT;
+ } else {
+ to_cnt = 0;
+ i2c_recover_bus(dev);
+ i2c_davinci_init(dev);
+ }
}
if (allow_sleep)
schedule_timeout(1);
u16 w;
int r;
- if (msg->len == 0)
- return -EINVAL;
-
if (!pdata)
pdata = &davinci_i2c_platform_data_default;
/* Introduce a delay, required for some boards (e.g Davinci EVM) */
dev->buf = msg->buf;
dev->buf_len = msg->len;
+ dev->stop = stop;
davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
flag |= DAVINCI_I2C_MDR_TRX;
if (stop)
flag |= DAVINCI_I2C_MDR_STP;
+ if (msg->len == 0) {
+ flag |= DAVINCI_I2C_MDR_RM;
+ flag &= ~DAVINCI_I2C_MDR_STP;
+ }
/* Enable receive or transmit interrupts */
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
if (msg->flags & I2C_M_RD)
- MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 1);
+ w |= DAVINCI_I2C_IMR_RRDY;
else
- MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 1);
+ w |= DAVINCI_I2C_IMR_XRDY;
davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
dev->terminate = 0;
+
/* write the data into mode register */
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+ /*
+ * First byte should be set here, not after interrupt,
+ * because transmit-data-ready interrupt can come before
+ * NACK-interrupt during sending of previous message and
+ * ICDXR may have wrong data
+ */
+ if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) {
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++);
+ dev->buf_len--;
+ }
+
r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
dev->adapter.timeout);
if (r == 0) {
dev_err(dev->dev, "controller timed out\n");
+ i2c_recover_bus(dev);
i2c_davinci_init(dev);
dev->buf_len = 0;
return -ETIMEDOUT;
return msg->len;
if (stop) {
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
- MOD_REG_BIT(w, DAVINCI_I2C_MDR_STP, 1);
+ w |= DAVINCI_I2C_MDR_STP;
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
}
return -EREMOTEIO;
if (ret < 0)
return ret;
}
+
+#ifdef CONFIG_CPU_FREQ
+ complete(&dev->xfr_complete);
+#endif
+
return num;
}
static u32 i2c_davinci_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static void terminate_read(struct davinci_i2c_dev *dev)
case DAVINCI_I2C_IVR_ARDY:
davinci_i2c_write_reg(dev,
DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY);
+ if (((dev->buf_len == 0) && (dev->stop != 0)) ||
+ (dev->cmd_err & DAVINCI_I2C_STR_NACK)) {
+ w = davinci_i2c_read_reg(dev,
+ DAVINCI_I2C_MDR_REG);
+ w |= DAVINCI_I2C_MDR_STP;
+ davinci_i2c_write_reg(dev,
+ DAVINCI_I2C_MDR_REG, w);
+ }
complete(&dev->cmd_complete);
break;
w = davinci_i2c_read_reg(dev,
DAVINCI_I2C_IMR_REG);
- MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 0);
+ w &= ~DAVINCI_I2C_IMR_XRDY;
davinci_i2c_write_reg(dev,
DAVINCI_I2C_IMR_REG,
w);
return count ? IRQ_HANDLED : IRQ_NONE;
}
+#ifdef CONFIG_CPU_FREQ
+static int i2c_davinci_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct davinci_i2c_dev *dev;
+
+ dev = container_of(nb, struct davinci_i2c_dev, freq_transition);
+ if (val == CPUFREQ_PRECHANGE) {
+ wait_for_completion(&dev->xfr_complete);
+ davinci_i2c_reset_ctrl(dev, 0);
+ } else if (val == CPUFREQ_POSTCHANGE) {
+ i2c_davinci_calc_clk_dividers(dev);
+ davinci_i2c_reset_ctrl(dev, 1);
+ }
+
+ return 0;
+}
+
+static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
+{
+ dev->freq_transition.notifier_call = i2c_davinci_cpufreq_transition;
+
+ return cpufreq_register_notifier(&dev->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
+{
+ cpufreq_unregister_notifier(&dev->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+#else
+static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
+{
+ return 0;
+}
+
+static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
+{
+}
+#endif
+
static struct i2c_algorithm i2c_davinci_algo = {
.master_xfer = i2c_davinci_xfer,
.functionality = i2c_davinci_func,
}
init_completion(&dev->cmd_complete);
+#ifdef CONFIG_CPU_FREQ
+ init_completion(&dev->xfr_complete);
+#endif
dev->dev = get_device(&pdev->dev);
dev->irq = irq->start;
platform_set_drvdata(pdev, dev);
}
clk_enable(dev->clk);
- dev->base = (void __iomem *)IO_ADDRESS(mem->start);
+ dev->base = ioremap(mem->start, resource_size(mem));
+ if (!dev->base) {
+ r = -EBUSY;
+ goto err_mem_ioremap;
+ }
+
i2c_davinci_init(dev);
r = request_irq(dev->irq, i2c_davinci_isr, 0, pdev->name, dev);
goto err_unuse_clocks;
}
+ r = i2c_davinci_cpufreq_register(dev);
+ if (r) {
+ dev_err(&pdev->dev, "failed to register cpufreq\n");
+ goto err_free_irq;
+ }
+
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
err_free_irq:
free_irq(dev->irq, dev);
err_unuse_clocks:
+ iounmap(dev->base);
+err_mem_ioremap:
clk_disable(dev->clk);
clk_put(dev->clk);
dev->clk = NULL;
struct davinci_i2c_dev *dev = platform_get_drvdata(pdev);
struct resource *mem;
+ i2c_davinci_cpufreq_deregister(dev);
+
platform_set_drvdata(pdev, NULL);
i2c_del_adapter(&dev->adapter);
put_device(&pdev->dev);
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
free_irq(IRQ_I2C, dev);
+ iounmap(dev->base);
kfree(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
return 0;
}
+#ifdef CONFIG_PM
+static int davinci_i2c_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+ /* put I2C into reset */
+ davinci_i2c_reset_ctrl(i2c_dev, 0);
+ clk_disable(i2c_dev->clk);
+
+ return 0;
+}
+
+static int davinci_i2c_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+ clk_enable(i2c_dev->clk);
+ /* take I2C out of reset */
+ davinci_i2c_reset_ctrl(i2c_dev, 1);
+
+ return 0;
+}
+
+static const struct dev_pm_ops davinci_i2c_pm = {
+ .suspend = davinci_i2c_suspend,
+ .resume = davinci_i2c_resume,
+};
+
+#define davinci_i2c_pm_ops (&davinci_i2c_pm)
+#else
+#define davinci_i2c_pm_ops NULL
+#endif
+
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:i2c_davinci");
.driver = {
.name = "i2c_davinci",
.owner = THIS_MODULE,
+ .pm = davinci_i2c_pm_ops,
},
};
return (u8)((opb + 9) / 10 - 1);
}
-static int __devinit iic_request_irq(struct of_device *ofdev,
+static int __devinit iic_request_irq(struct platform_device *ofdev,
struct ibm_iic_private *dev)
{
struct device_node *np = ofdev->dev.of_node;
/*
* Register single IIC interface
*/
-static int __devinit iic_probe(struct of_device *ofdev,
+static int __devinit iic_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
/*
* Cleanup initialized IIC interface
*/
-static int __devexit iic_remove(struct of_device *ofdev)
+static int __devexit iic_remove(struct platform_device *ofdev)
{
struct ibm_iic_private *dev = dev_get_drvdata(&ofdev->dev);
.timeout = HZ,
};
-static int __devinit fsl_i2c_probe(struct of_device *op,
+static int __devinit fsl_i2c_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct mpc_i2c *i2c;
return result;
};
-static int __devexit fsl_i2c_remove(struct of_device *op)
+static int __devexit fsl_i2c_remove(struct platform_device *op)
{
struct mpc_i2c *i2c = dev_get_drvdata(&op->dev);
--- /dev/null
+/*
+ * linux/drivers/i2c/busses/i2c-nuc900.c
+ *
+ * Copyright (c) 2010 Nuvoton technology corporation.
+ *
+ * This driver based on S3C2410 I2C driver of Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>.
+ * Written by Wan ZongShun <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include <mach/mfp.h>
+#include <mach/i2c.h>
+
+/* nuc900 i2c registers offset */
+
+#define CSR 0x00
+#define DIVIDER 0x04
+#define CMDR 0x08
+#define SWR 0x0C
+#define RXR 0x10
+#define TXR 0x14
+
+/* nuc900 i2c CSR register bits */
+
+#define IRQEN 0x003
+#define I2CBUSY 0x400
+#define I2CSTART 0x018
+#define IRQFLAG 0x004
+#define ARBIT_LOST 0x200
+#define SLAVE_ACK 0x800
+
+/* nuc900 i2c CMDR register bits */
+
+#define I2C_CMD_START 0x10
+#define I2C_CMD_STOP 0x08
+#define I2C_CMD_READ 0x04
+#define I2C_CMD_WRITE 0x02
+#define I2C_CMD_NACK 0x01
+
+/* i2c controller state */
+
+enum nuc900_i2c_state {
+ STATE_IDLE,
+ STATE_START,
+ STATE_READ,
+ STATE_WRITE,
+ STATE_STOP
+};
+
+/* i2c controller private data */
+
+struct nuc900_i2c {
+ spinlock_t lock;
+ wait_queue_head_t wait;
+
+ struct i2c_msg *msg;
+ unsigned int msg_num;
+ unsigned int msg_idx;
+ unsigned int msg_ptr;
+ unsigned int irq;
+
+ enum nuc900_i2c_state state;
+
+ void __iomem *regs;
+ struct clk *clk;
+ struct device *dev;
+ struct resource *ioarea;
+ struct i2c_adapter adap;
+};
+
+/* nuc900_i2c_master_complete
+ *
+ * complete the message and wake up the caller, using the given return code,
+ * or zero to mean ok.
+*/
+
+static inline void nuc900_i2c_master_complete(struct nuc900_i2c *i2c, int ret)
+{
+ dev_dbg(i2c->dev, "master_complete %d\n", ret);
+
+ i2c->msg_ptr = 0;
+ i2c->msg = NULL;
+ i2c->msg_idx++;
+ i2c->msg_num = 0;
+ if (ret)
+ i2c->msg_idx = ret;
+
+ wake_up(&i2c->wait);
+}
+
+/* irq enable/disable functions */
+
+static inline void nuc900_i2c_disable_irq(struct nuc900_i2c *i2c)
+{
+ unsigned long tmp;
+
+ tmp = readl(i2c->regs + CSR);
+ writel(tmp & ~IRQEN, i2c->regs + CSR);
+}
+
+static inline void nuc900_i2c_enable_irq(struct nuc900_i2c *i2c)
+{
+ unsigned long tmp;
+
+ tmp = readl(i2c->regs + CSR);
+ writel(tmp | IRQEN, i2c->regs + CSR);
+}
+
+
+/* nuc900_i2c_message_start
+ *
+ * put the start of a message onto the bus
+*/
+
+static void nuc900_i2c_message_start(struct nuc900_i2c *i2c,
+ struct i2c_msg *msg)
+{
+ unsigned int addr = (msg->addr & 0x7f) << 1;
+
+ if (msg->flags & I2C_M_RD)
+ addr |= 0x1;
+ writel(addr & 0xff, i2c->regs + TXR);
+ writel(I2C_CMD_START | I2C_CMD_WRITE, i2c->regs + CMDR);
+}
+
+static inline void nuc900_i2c_stop(struct nuc900_i2c *i2c, int ret)
+{
+
+ dev_dbg(i2c->dev, "STOP\n");
+
+ /* stop the transfer */
+ i2c->state = STATE_STOP;
+ writel(I2C_CMD_STOP, i2c->regs + CMDR);
+
+ nuc900_i2c_master_complete(i2c, ret);
+ nuc900_i2c_disable_irq(i2c);
+}
+
+/* helper functions to determine the current state in the set of
+ * messages we are sending
+*/
+
+/* is_lastmsg()
+ *
+ * returns TRUE if the current message is the last in the set
+*/
+
+static inline int is_lastmsg(struct nuc900_i2c *i2c)
+{
+ return i2c->msg_idx >= (i2c->msg_num - 1);
+}
+
+/* is_msglast
+ *
+ * returns TRUE if we this is the last byte in the current message
+*/
+
+static inline int is_msglast(struct nuc900_i2c *i2c)
+{
+ return i2c->msg_ptr == i2c->msg->len-1;
+}
+
+/* is_msgend
+ *
+ * returns TRUE if we reached the end of the current message
+*/
+
+static inline int is_msgend(struct nuc900_i2c *i2c)
+{
+ return i2c->msg_ptr >= i2c->msg->len;
+}
+
+/* i2c_nuc900_irq_nextbyte
+ *
+ * process an interrupt and work out what to do
+ */
+
+static void i2c_nuc900_irq_nextbyte(struct nuc900_i2c *i2c,
+ unsigned long iicstat)
+{
+ unsigned char byte;
+
+ switch (i2c->state) {
+
+ case STATE_IDLE:
+ dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__);
+ break;
+
+ case STATE_STOP:
+ dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
+ nuc900_i2c_disable_irq(i2c);
+ break;
+
+ case STATE_START:
+ /* last thing we did was send a start condition on the
+ * bus, or started a new i2c message
+ */
+
+ if (iicstat & SLAVE_ACK &&
+ !(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
+ /* ack was not received... */
+
+ dev_dbg(i2c->dev, "ack was not received\n");
+ nuc900_i2c_stop(i2c, -ENXIO);
+ break;
+ }
+
+ if (i2c->msg->flags & I2C_M_RD)
+ i2c->state = STATE_READ;
+ else
+ i2c->state = STATE_WRITE;
+
+ /* terminate the transfer if there is nothing to do
+ * as this is used by the i2c probe to find devices.
+ */
+
+ if (is_lastmsg(i2c) && i2c->msg->len == 0) {
+ nuc900_i2c_stop(i2c, 0);
+ break;
+ }
+
+ if (i2c->state == STATE_READ)
+ goto prepare_read;
+
+ /* fall through to the write state, as we will need to
+ * send a byte as well
+ */
+
+ case STATE_WRITE:
+ /* we are writing data to the device... check for the
+ * end of the message, and if so, work out what to do
+ */
+
+ if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
+ if (iicstat & SLAVE_ACK) {
+ dev_dbg(i2c->dev, "WRITE: No Ack\n");
+
+ nuc900_i2c_stop(i2c, -ECONNREFUSED);
+ break;
+ }
+ }
+
+retry_write:
+
+ if (!is_msgend(i2c)) {
+ byte = i2c->msg->buf[i2c->msg_ptr++];
+ writeb(byte, i2c->regs + TXR);
+ writel(I2C_CMD_WRITE, i2c->regs + CMDR);
+
+ } else if (!is_lastmsg(i2c)) {
+ /* we need to go to the next i2c message */
+
+ dev_dbg(i2c->dev, "WRITE: Next Message\n");
+
+ i2c->msg_ptr = 0;
+ i2c->msg_idx++;
+ i2c->msg++;
+
+ /* check to see if we need to do another message */
+ if (i2c->msg->flags & I2C_M_NOSTART) {
+
+ if (i2c->msg->flags & I2C_M_RD) {
+ /* cannot do this, the controller
+ * forces us to send a new START
+ * when we change direction
+ */
+
+ nuc900_i2c_stop(i2c, -EINVAL);
+ }
+
+ goto retry_write;
+ } else {
+ /* send the new start */
+ nuc900_i2c_message_start(i2c, i2c->msg);
+ i2c->state = STATE_START;
+ }
+
+ } else {
+ /* send stop */
+
+ nuc900_i2c_stop(i2c, 0);
+ }
+ break;
+
+ case STATE_READ:
+ /* we have a byte of data in the data register, do
+ * something with it, and then work out wether we are
+ * going to do any more read/write
+ */
+
+ byte = readb(i2c->regs + RXR);
+ i2c->msg->buf[i2c->msg_ptr++] = byte;
+
+prepare_read:
+ if (is_msglast(i2c)) {
+ /* last byte of buffer */
+
+ if (is_lastmsg(i2c))
+ writel(I2C_CMD_READ | I2C_CMD_NACK,
+ i2c->regs + CMDR);
+
+ } else if (is_msgend(i2c)) {
+ /* ok, we've read the entire buffer, see if there
+ * is anything else we need to do
+ */
+
+ if (is_lastmsg(i2c)) {
+ /* last message, send stop and complete */
+ dev_dbg(i2c->dev, "READ: Send Stop\n");
+
+ nuc900_i2c_stop(i2c, 0);
+ } else {
+ /* go to the next transfer */
+ dev_dbg(i2c->dev, "READ: Next Transfer\n");
+
+ i2c->msg_ptr = 0;
+ i2c->msg_idx++;
+ i2c->msg++;
+
+ writel(I2C_CMD_READ, i2c->regs + CMDR);
+ }
+
+ } else {
+ writel(I2C_CMD_READ, i2c->regs + CMDR);
+ }
+
+ break;
+ }
+}
+
+/* nuc900_i2c_irq
+ *
+ * top level IRQ servicing routine
+*/
+
+static irqreturn_t nuc900_i2c_irq(int irqno, void *dev_id)
+{
+ struct nuc900_i2c *i2c = dev_id;
+ unsigned long status;
+
+ status = readl(i2c->regs + CSR);
+ writel(status | IRQFLAG, i2c->regs + CSR);
+
+ if (status & ARBIT_LOST) {
+ /* deal with arbitration loss */
+ dev_err(i2c->dev, "deal with arbitration loss\n");
+ goto out;
+ }
+
+ if (i2c->state == STATE_IDLE) {
+ dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
+ goto out;
+ }
+
+ /* pretty much this leaves us with the fact that we've
+ * transmitted or received whatever byte we last sent
+ */
+
+ i2c_nuc900_irq_nextbyte(i2c, status);
+
+ out:
+ return IRQ_HANDLED;
+}
+
+
+/* nuc900_i2c_set_master
+ *
+ * get the i2c bus for a master transaction
+*/
+
+static int nuc900_i2c_set_master(struct nuc900_i2c *i2c)
+{
+ int timeout = 400;
+
+ while (timeout-- > 0) {
+ if (((readl(i2c->regs + SWR) & I2CSTART) == I2CSTART) &&
+ ((readl(i2c->regs + CSR) & I2CBUSY) == 0)) {
+ return 0;
+ }
+
+ msleep(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* nuc900_i2c_doxfer
+ *
+ * this starts an i2c transfer
+*/
+
+static int nuc900_i2c_doxfer(struct nuc900_i2c *i2c,
+ struct i2c_msg *msgs, int num)
+{
+ unsigned long iicstat, timeout;
+ int spins = 20;
+ int ret;
+
+ ret = nuc900_i2c_set_master(i2c);
+ if (ret != 0) {
+ dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ spin_lock_irq(&i2c->lock);
+
+ i2c->msg = msgs;
+ i2c->msg_num = num;
+ i2c->msg_ptr = 0;
+ i2c->msg_idx = 0;
+ i2c->state = STATE_START;
+
+ nuc900_i2c_message_start(i2c, msgs);
+ spin_unlock_irq(&i2c->lock);
+
+ timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
+
+ ret = i2c->msg_idx;
+
+ /* having these next two as dev_err() makes life very
+ * noisy when doing an i2cdetect
+ */
+
+ if (timeout == 0)
+ dev_dbg(i2c->dev, "timeout\n");
+ else if (ret != num)
+ dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
+
+ /* ensure the stop has been through the bus */
+
+ dev_dbg(i2c->dev, "waiting for bus idle\n");
+
+ /* first, try busy waiting briefly */
+ do {
+ iicstat = readl(i2c->regs + CSR);
+ } while ((iicstat & I2CBUSY) && --spins);
+
+ /* if that timed out sleep */
+ if (!spins) {
+ msleep(1);
+ iicstat = readl(i2c->regs + CSR);
+ }
+
+ if (iicstat & I2CBUSY)
+ dev_warn(i2c->dev, "timeout waiting for bus idle\n");
+
+ out:
+ return ret;
+}
+
+/* nuc900_i2c_xfer
+ *
+ * first port of call from the i2c bus code when an message needs
+ * transferring across the i2c bus.
+*/
+
+static int nuc900_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct nuc900_i2c *i2c = (struct nuc900_i2c *)adap->algo_data;
+ int retry;
+ int ret;
+
+ nuc900_i2c_enable_irq(i2c);
+
+ for (retry = 0; retry < adap->retries; retry++) {
+
+ ret = nuc900_i2c_doxfer(i2c, msgs, num);
+
+ if (ret != -EAGAIN)
+ return ret;
+
+ dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
+
+ udelay(100);
+ }
+
+ return -EREMOTEIO;
+}
+
+/* declare our i2c functionality */
+static u32 nuc900_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+/* i2c bus registration info */
+
+static const struct i2c_algorithm nuc900_i2c_algorithm = {
+ .master_xfer = nuc900_i2c_xfer,
+ .functionality = nuc900_i2c_func,
+};
+
+/* nuc900_i2c_probe
+ *
+ * called by the bus driver when a suitable device is found
+*/
+
+static int __devinit nuc900_i2c_probe(struct platform_device *pdev)
+{
+ struct nuc900_i2c *i2c;
+ struct nuc900_platform_i2c *pdata;
+ struct resource *res;
+ int ret;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ i2c = kzalloc(sizeof(struct nuc900_i2c), GFP_KERNEL);
+ if (!i2c) {
+ dev_err(&pdev->dev, "no memory for state\n");
+ return -ENOMEM;
+ }
+
+ strlcpy(i2c->adap.name, "nuc900-i2c0", sizeof(i2c->adap.name));
+ i2c->adap.owner = THIS_MODULE;
+ i2c->adap.algo = &nuc900_i2c_algorithm;
+ i2c->adap.retries = 2;
+ i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+
+ spin_lock_init(&i2c->lock);
+ init_waitqueue_head(&i2c->wait);
+
+ /* find the clock and enable it */
+
+ i2c->dev = &pdev->dev;
+ i2c->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(i2c->clk)) {
+ dev_err(&pdev->dev, "cannot get clock\n");
+ ret = -ENOENT;
+ goto err_noclk;
+ }
+
+ dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
+
+ clk_enable(i2c->clk);
+
+ /* map the registers */
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "cannot find IO resource\n");
+ ret = -ENOENT;
+ goto err_clk;
+ }
+
+ i2c->ioarea = request_mem_region(res->start, resource_size(res),
+ pdev->name);
+
+ if (i2c->ioarea == NULL) {
+ dev_err(&pdev->dev, "cannot request IO\n");
+ ret = -ENXIO;
+ goto err_clk;
+ }
+
+ i2c->regs = ioremap(res->start, resource_size(res));
+
+ if (i2c->regs == NULL) {
+ dev_err(&pdev->dev, "cannot map IO\n");
+ ret = -ENXIO;
+ goto err_ioarea;
+ }
+
+ dev_dbg(&pdev->dev, "registers %p (%p, %p)\n",
+ i2c->regs, i2c->ioarea, res);
+
+ /* setup info block for the i2c core */
+
+ i2c->adap.algo_data = i2c;
+ i2c->adap.dev.parent = &pdev->dev;
+
+ mfp_set_groupg(&pdev->dev);
+
+ clk_get_rate(i2c->clk);
+
+ ret = (i2c->clk.apbfreq)/(pdata->bus_freq * 5) - 1;
+ writel(ret & 0xffff, i2c->regs + DIVIDER);
+
+ /* find the IRQ for this unit (note, this relies on the init call to
+ * ensure no current IRQs pending
+ */
+
+ i2c->irq = ret = platform_get_irq(pdev, 0);
+ if (ret <= 0) {
+ dev_err(&pdev->dev, "cannot find IRQ\n");
+ goto err_iomap;
+ }
+
+ ret = request_irq(i2c->irq, nuc900_i2c_irq, IRQF_DISABLED | IRQF_SHARED,
+ dev_name(&pdev->dev), i2c);
+
+ if (ret != 0) {
+ dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
+ goto err_iomap;
+ }
+
+ /* Note, previous versions of the driver used i2c_add_adapter()
+ * to add the bus at any number. We now pass the bus number via
+ * the platform data, so if unset it will now default to always
+ * being bus 0.
+ */
+
+ i2c->adap.nr = pdata->bus_num;
+
+ ret = i2c_add_numbered_adapter(&i2c->adap);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ goto err_irq;
+ }
+
+ platform_set_drvdata(pdev, i2c);
+
+ dev_info(&pdev->dev, "%s: NUC900 I2C adapter\n",
+ dev_name(&i2c->adap.dev));
+ return 0;
+
+ err_irq:
+ free_irq(i2c->irq, i2c);
+
+ err_iomap:
+ iounmap(i2c->regs);
+
+ err_ioarea:
+ release_resource(i2c->ioarea);
+ kfree(i2c->ioarea);
+
+ err_clk:
+ clk_disable(i2c->clk);
+ clk_put(i2c->clk);
+
+ err_noclk:
+ kfree(i2c);
+ return ret;
+}
+
+/* nuc900_i2c_remove
+ *
+ * called when device is removed from the bus
+*/
+
+static int __devexit nuc900_i2c_remove(struct platform_device *pdev)
+{
+ struct nuc900_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c->adap);
+ free_irq(i2c->irq, i2c);
+
+ clk_disable(i2c->clk);
+ clk_put(i2c->clk);
+
+ iounmap(i2c->regs);
+
+ release_resource(i2c->ioarea);
+ kfree(i2c->ioarea);
+ kfree(i2c);
+
+ return 0;
+}
+
+static struct platform_driver nuc900_i2c_driver = {
+ .probe = nuc900_i2c_probe,
+ .remove = __devexit_p(nuc900_i2c_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "nuc900-i2c0",
+ },
+};
+
+static int __init i2c_adap_nuc900_init(void)
+{
+ return platform_driver_register(&nuc900_i2c_driver);
+}
+
+static void __exit i2c_adap_nuc900_exit(void)
+{
+ platform_driver_unregister(&nuc900_i2c_driver);
+}
+subsys_initcall(i2c_adap_nuc900_init);
+module_exit(i2c_adap_nuc900_exit);
+
+MODULE_DESCRIPTION("NUC900 I2C Bus driver");
+MODULE_AUTHOR("Wan ZongShun, <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-i2c0");
struct pxa_i2c *i2c;
struct resource *res;
struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
- struct platform_device_id *id = platform_get_device_id(dev);
+ const struct platform_device_id *id = platform_get_device_id(dev);
int ret;
int irq;
struct i2c_adapter adap;
struct clk *clk;
+ u_int8_t icic;
u_int8_t iccl;
u_int8_t icch;
+ u_int8_t flags;
spinlock_t lock;
wait_queue_head_t wait;
int sr;
};
+#define IIC_FLAG_HAS_ICIC67 (1 << 0)
+
#define NORMAL_SPEED 100000 /* FAST_SPEED 400000 */
/* Register offsets */
-#define ICDR(pd) (pd->reg + 0x00)
-#define ICCR(pd) (pd->reg + 0x04)
-#define ICSR(pd) (pd->reg + 0x08)
-#define ICIC(pd) (pd->reg + 0x0c)
-#define ICCL(pd) (pd->reg + 0x10)
-#define ICCH(pd) (pd->reg + 0x14)
+#define ICDR 0x00
+#define ICCR 0x04
+#define ICSR 0x08
+#define ICIC 0x0c
+#define ICCL 0x10
+#define ICCH 0x14
/* Register bits */
#define ICCR_ICE 0x80
#define ICSR_WAIT 0x02
#define ICSR_DTE 0x01
+#define ICIC_ICCLB8 0x80
+#define ICIC_ICCHB8 0x40
#define ICIC_ALE 0x08
#define ICIC_TACKE 0x04
#define ICIC_WAITE 0x02
#define ICIC_DTEE 0x01
+static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data)
+{
+ if (offs == ICIC)
+ data |= pd->icic;
+
+ iowrite8(data, pd->reg + offs);
+}
+
+static unsigned char iic_rd(struct sh_mobile_i2c_data *pd, int offs)
+{
+ return ioread8(pd->reg + offs);
+}
+
+static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs,
+ unsigned char set, unsigned char clr)
+{
+ iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr);
+}
+
static void activate_ch(struct sh_mobile_i2c_data *pd)
{
unsigned long i2c_clk;
else
pd->iccl = (u_int8_t)(num/denom);
+ /* one more bit of ICCL in ICIC */
+ if (pd->flags & IIC_FLAG_HAS_ICIC67) {
+ if ((num/denom) > 0xff)
+ pd->icic |= ICIC_ICCLB8;
+ else
+ pd->icic &= ~ICIC_ICCLB8;
+ }
+
/* Calculate the value for icch. From the data sheet:
icch = (p clock / transfer rate) * (H / (L + H)) */
num = i2c_clk * 4;
else
pd->icch = (u_int8_t)(num/denom);
+ /* one more bit of ICCH in ICIC */
+ if (pd->flags & IIC_FLAG_HAS_ICIC67) {
+ if ((num/denom) > 0xff)
+ pd->icic |= ICIC_ICCHB8;
+ else
+ pd->icic &= ~ICIC_ICCHB8;
+ }
+
/* Enable channel and configure rx ack */
- iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
+ iic_set_clr(pd, ICCR, ICCR_ICE, 0);
/* Mask all interrupts */
- iowrite8(0, ICIC(pd));
+ iic_wr(pd, ICIC, 0);
/* Set the clock */
- iowrite8(pd->iccl, ICCL(pd));
- iowrite8(pd->icch, ICCH(pd));
+ iic_wr(pd, ICCL, pd->iccl);
+ iic_wr(pd, ICCH, pd->icch);
}
static void deactivate_ch(struct sh_mobile_i2c_data *pd)
{
/* Clear/disable interrupts */
- iowrite8(0, ICSR(pd));
- iowrite8(0, ICIC(pd));
+ iic_wr(pd, ICSR, 0);
+ iic_wr(pd, ICIC, 0);
/* Disable channel */
- iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
+ iic_set_clr(pd, ICCR, 0, ICCR_ICE);
/* Disable clock and mark device as idle */
clk_disable(pd->clk);
switch (op) {
case OP_START: /* issue start and trigger DTE interrupt */
- iowrite8(0x94, ICCR(pd));
+ iic_wr(pd, ICCR, 0x94);
break;
case OP_TX_FIRST: /* disable DTE interrupt and write data */
- iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
- iowrite8(data, ICDR(pd));
+ iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+ iic_wr(pd, ICDR, data);
break;
case OP_TX: /* write data */
- iowrite8(data, ICDR(pd));
+ iic_wr(pd, ICDR, data);
break;
case OP_TX_STOP: /* write data and issue a stop afterwards */
- iowrite8(data, ICDR(pd));
- iowrite8(0x90, ICCR(pd));
+ iic_wr(pd, ICDR, data);
+ iic_wr(pd, ICCR, 0x90);
break;
case OP_TX_TO_RX: /* select read mode */
- iowrite8(0x81, ICCR(pd));
+ iic_wr(pd, ICCR, 0x81);
break;
case OP_RX: /* just read data */
- ret = ioread8(ICDR(pd));
+ ret = iic_rd(pd, ICDR);
break;
case OP_RX_STOP: /* enable DTE interrupt, issue stop */
- iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
- ICIC(pd));
- iowrite8(0xc0, ICCR(pd));
+ iic_wr(pd, ICIC,
+ ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+ iic_wr(pd, ICCR, 0xc0);
break;
case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
- iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
- ICIC(pd));
- ret = ioread8(ICDR(pd));
- iowrite8(0xc0, ICCR(pd));
+ iic_wr(pd, ICIC,
+ ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+ ret = iic_rd(pd, ICDR);
+ iic_wr(pd, ICCR, 0xc0);
break;
}
unsigned char sr;
int wakeup;
- sr = ioread8(ICSR(pd));
+ sr = iic_rd(pd, ICSR);
pd->sr |= sr; /* remember state */
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
if (sr & (ICSR_AL | ICSR_TACK)) {
/* don't interrupt transaction - continue to issue stop */
- iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+ iic_wr(pd, ICSR, sr & ~(ICSR_AL | ICSR_TACK));
wakeup = 0;
} else if (pd->msg->flags & I2C_M_RD)
wakeup = sh_mobile_i2c_isr_rx(pd);
wakeup = sh_mobile_i2c_isr_tx(pd);
if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
- iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
+ iic_wr(pd, ICSR, sr & ~ICSR_WAIT);
if (wakeup) {
pd->sr |= SW_DONE;
}
/* Initialize channel registers */
- iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
+ iic_set_clr(pd, ICCR, 0, ICCR_ICE);
/* Enable channel and configure rx ack */
- iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
+ iic_set_clr(pd, ICCR, ICCR_ICE, 0);
/* Set the clock */
- iowrite8(pd->iccl, ICCL(pd));
- iowrite8(pd->icch, ICCH(pd));
+ iic_wr(pd, ICCL, pd->iccl);
+ iic_wr(pd, ICCH, pd->icch);
pd->msg = usr_msg;
pd->pos = -1;
pd->sr = 0;
/* Enable all interrupts to begin with */
- iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
+ iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
return 0;
}
retry_count = 1000;
again:
- val = ioread8(ICSR(pd));
+ val = iic_rd(pd, ICSR);
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
goto err_irq;
}
+ /* The IIC blocks on SH-Mobile ARM processors
+ * come with two new bits in ICIC.
+ */
+ if (size > 0x17)
+ pd->flags |= IIC_FLAG_HAS_ICIC67;
+
/* Enable Runtime PM for this device.
*
* Also tell the Runtime PM core to ignore children
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
- Jean Delvare <khali@linux-fr.org> */
+ Jean Delvare <khali@linux-fr.org>
+ Mux support by Rodolfo Giometti <giometti@enneenne.com> and
+ Michael Lawnick <michael.lawnick.ext@nsn.com> */
#include <linux/module.h>
#include <linux/kernel.h>
return 0;
}
+/* walk up mux tree */
+static int i2c_check_mux_parents(struct i2c_adapter *adapter, int addr)
+{
+ int result;
+
+ result = device_for_each_child(&adapter->dev, &addr,
+ __i2c_check_addr_busy);
+
+ if (!result && i2c_parent_is_i2c_adapter(adapter))
+ result = i2c_check_mux_parents(
+ to_i2c_adapter(adapter->dev.parent), addr);
+
+ return result;
+}
+
+/* recurse down mux tree */
+static int i2c_check_mux_children(struct device *dev, void *addrp)
+{
+ int result;
+
+ if (dev->type == &i2c_adapter_type)
+ result = device_for_each_child(dev, addrp,
+ i2c_check_mux_children);
+ else
+ result = __i2c_check_addr_busy(dev, addrp);
+
+ return result;
+}
+
static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
{
- return device_for_each_child(&adapter->dev, &addr,
- __i2c_check_addr_busy);
+ int result = 0;
+
+ if (i2c_parent_is_i2c_adapter(adapter))
+ result = i2c_check_mux_parents(
+ to_i2c_adapter(adapter->dev.parent), addr);
+
+ if (!result)
+ result = device_for_each_child(&adapter->dev, &addr,
+ i2c_check_mux_children);
+
+ return result;
+}
+
+/**
+ * i2c_lock_adapter - Get exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+void i2c_lock_adapter(struct i2c_adapter *adapter)
+{
+ if (i2c_parent_is_i2c_adapter(adapter))
+ i2c_lock_adapter(to_i2c_adapter(adapter->dev.parent));
+ else
+ rt_mutex_lock(&adapter->bus_lock);
+}
+EXPORT_SYMBOL_GPL(i2c_lock_adapter);
+
+/**
+ * i2c_trylock_adapter - Try to get exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+static int i2c_trylock_adapter(struct i2c_adapter *adapter)
+{
+ if (i2c_parent_is_i2c_adapter(adapter))
+ return i2c_trylock_adapter(to_i2c_adapter(adapter->dev.parent));
+ else
+ return rt_mutex_trylock(&adapter->bus_lock);
+}
+
+/**
+ * i2c_unlock_adapter - Release exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+void i2c_unlock_adapter(struct i2c_adapter *adapter)
+{
+ if (i2c_parent_is_i2c_adapter(adapter))
+ i2c_unlock_adapter(to_i2c_adapter(adapter->dev.parent));
+ else
+ rt_mutex_unlock(&adapter->bus_lock);
}
+EXPORT_SYMBOL_GPL(i2c_unlock_adapter);
/**
* i2c_new_device - instantiate an i2c device
return -EINVAL;
/* Keep track of the added device */
- i2c_lock_adapter(adap);
+ mutex_lock(&adap->userspace_clients_lock);
list_add_tail(&client->detected, &adap->userspace_clients);
- i2c_unlock_adapter(adap);
+ mutex_unlock(&adap->userspace_clients_lock);
dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
info.type, info.addr);
/* Make sure the device was added through sysfs */
res = -ENOENT;
- i2c_lock_adapter(adap);
+ mutex_lock(&adap->userspace_clients_lock);
list_for_each_entry_safe(client, next, &adap->userspace_clients,
detected) {
if (client->addr == addr) {
break;
}
}
- i2c_unlock_adapter(adap);
+ mutex_unlock(&adap->userspace_clients_lock);
if (res < 0)
dev_err(dev, "%s: Can't find device in list\n",
NULL
};
-static struct device_type i2c_adapter_type = {
+struct device_type i2c_adapter_type = {
.groups = i2c_adapter_attr_groups,
.release = i2c_adapter_dev_release,
};
+EXPORT_SYMBOL_GPL(i2c_adapter_type);
#ifdef CONFIG_I2C_COMPAT
static struct class_compat *i2c_adapter_compat_class;
static int i2c_register_adapter(struct i2c_adapter *adap)
{
- int res = 0, dummy;
+ int res = 0;
/* Can't register until after driver model init */
if (unlikely(WARN_ON(!i2c_bus_type.p))) {
}
rt_mutex_init(&adap->bus_lock);
+ mutex_init(&adap->userspace_clients_lock);
INIT_LIST_HEAD(&adap->userspace_clients);
/* Set default timeout to 1 second if not already set */
/* Notify drivers */
mutex_lock(&core_lock);
- dummy = bus_for_each_drv(&i2c_bus_type, NULL, adap,
- __process_new_adapter);
+ bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
mutex_unlock(&core_lock);
return 0;
return res;
/* Remove devices instantiated from sysfs */
- i2c_lock_adapter(adap);
+ mutex_lock(&adap->userspace_clients_lock);
list_for_each_entry_safe(client, next, &adap->userspace_clients,
detected) {
dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
list_del(&client->detected);
i2c_unregister_device(client);
}
- i2c_unlock_adapter(adap);
+ mutex_unlock(&adap->userspace_clients_lock);
/* Detach any active clients. This can't fail, thus we do not
checking the returned value. */
#endif
if (in_atomic() || irqs_disabled()) {
- ret = rt_mutex_trylock(&adap->bus_lock);
+ ret = i2c_trylock_adapter(adap);
if (!ret)
/* I2C activity is ongoing. */
return -EAGAIN;
} else {
- rt_mutex_lock(&adap->bus_lock);
+ i2c_lock_adapter(adap);
}
/* Retry automatically on arbitration loss */
if (time_after(jiffies, orig_jiffies + adap->timeout))
break;
}
- rt_mutex_unlock(&adap->bus_lock);
+ i2c_unlock_adapter(adap);
return ret;
} else {
I2C_SMBUS_BYTE_DATA, &dummy);
else
#endif
- if ((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50
- || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
- err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE, &dummy);
- else
+ if (!((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50)
+ && i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0,
I2C_SMBUS_QUICK, NULL);
+ else if (i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE))
+ err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE, &dummy);
+ else {
+ dev_warn(&adap->dev, "No suitable probing method supported\n");
+ err = -EOPNOTSUPP;
+ }
return err >= 0;
}
if (!(adapter->class & driver->class))
goto exit_free;
- /* Stop here if the bus doesn't support probing */
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE)) {
- if (address_list[0] == I2C_CLIENT_END)
- goto exit_free;
-
- dev_warn(&adapter->dev, "Probing not supported\n");
- err = -EOPNOTSUPP;
- goto exit_free;
- }
-
for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) {
dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
"addr 0x%02x\n", adap_id, address_list[i]);
return err;
}
+int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr)
+{
+ return i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_QUICK, NULL) >= 0;
+}
+EXPORT_SYMBOL_GPL(i2c_probe_func_quick_read);
+
struct i2c_client *
i2c_new_probed_device(struct i2c_adapter *adap,
struct i2c_board_info *info,
- unsigned short const *addr_list)
+ unsigned short const *addr_list,
+ int (*probe)(struct i2c_adapter *, unsigned short addr))
{
int i;
- /* Stop here if the bus doesn't support probing */
- if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE)) {
- dev_err(&adap->dev, "Probing not supported\n");
- return NULL;
- }
+ if (!probe)
+ probe = i2c_default_probe;
for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
/* Check address validity */
}
/* Test address responsiveness */
- if (i2c_default_probe(adap, addr_list[i]))
+ if (probe(adap, addr_list[i]))
break;
}
flags &= I2C_M_TEN | I2C_CLIENT_PEC;
if (adapter->algo->smbus_xfer) {
- rt_mutex_lock(&adapter->bus_lock);
+ i2c_lock_adapter(adapter);
/* Retry automatically on arbitration loss */
orig_jiffies = jiffies;
orig_jiffies + adapter->timeout))
break;
}
- rt_mutex_unlock(&adapter->bus_lock);
+ i2c_unlock_adapter(adapter);
} else
res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
command, protocol, data);
if (count > 8192)
count = 8192;
- tmp = kmalloc(count, GFP_KERNEL);
- if (tmp == NULL)
- return -ENOMEM;
- if (copy_from_user(tmp, buf, count)) {
- kfree(tmp);
- return -EFAULT;
- }
+ tmp = memdup_user(buf, count);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n",
iminor(file->f_path.dentry->d_inode), count);
return dev->driver ? -EBUSY : 0;
}
+/* walk up mux tree */
+static int i2cdev_check_mux_parents(struct i2c_adapter *adapter, int addr)
+{
+ int result;
+
+ result = device_for_each_child(&adapter->dev, &addr, i2cdev_check);
+
+ if (!result && i2c_parent_is_i2c_adapter(adapter))
+ result = i2cdev_check_mux_parents(
+ to_i2c_adapter(adapter->dev.parent), addr);
+
+ return result;
+}
+
+/* recurse down mux tree */
+static int i2cdev_check_mux_children(struct device *dev, void *addrp)
+{
+ int result;
+
+ if (dev->type == &i2c_adapter_type)
+ result = device_for_each_child(dev, addrp,
+ i2cdev_check_mux_children);
+ else
+ result = i2cdev_check(dev, addrp);
+
+ return result;
+}
+
/* This address checking function differs from the one in i2c-core
in that it considers an address with a registered device, but no
driver bound to it, as NOT busy. */
static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr)
{
- return device_for_each_child(&adapter->dev, &addr, i2cdev_check);
+ int result = 0;
+
+ if (i2c_parent_is_i2c_adapter(adapter))
+ result = i2cdev_check_mux_parents(
+ to_i2c_adapter(adapter->dev.parent), addr);
+
+ if (!result)
+ result = device_for_each_child(&adapter->dev, &addr,
+ i2cdev_check_mux_children);
+
+ return result;
}
static noinline int i2cdev_ioctl_rdrw(struct i2c_client *client,
if (rdwr_arg.nmsgs > I2C_RDRW_IOCTL_MAX_MSGS)
return -EINVAL;
- rdwr_pa = (struct i2c_msg *)
- kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg),
- GFP_KERNEL);
+ rdwr_pa = kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg), GFP_KERNEL);
if (!rdwr_pa)
return -ENOMEM;
break;
}
data_ptrs[i] = (u8 __user *)rdwr_pa[i].buf;
- rdwr_pa[i].buf = kmalloc(rdwr_pa[i].len, GFP_KERNEL);
- if (rdwr_pa[i].buf == NULL) {
- res = -ENOMEM;
- break;
- }
- if (copy_from_user(rdwr_pa[i].buf, data_ptrs[i],
- rdwr_pa[i].len)) {
- ++i; /* Needs to be kfreed too */
- res = -EFAULT;
+ rdwr_pa[i].buf = memdup_user(data_ptrs[i], rdwr_pa[i].len);
+ if (IS_ERR(rdwr_pa[i].buf)) {
+ res = PTR_ERR(rdwr_pa[i].buf);
break;
}
}
--- /dev/null
+/*
+ * Multiplexed I2C bus driver.
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ * Copyright (c) 2009-2010 NSN GmbH & Co KG <michael.lawnick.ext@nsn.com>
+ *
+ * Simplifies access to complex multiplexed I2C bus topologies, by presenting
+ * each multiplexed bus segment as an additional I2C adapter.
+ * Supports multi-level mux'ing (mux behind a mux).
+ *
+ * Based on:
+ * i2c-virt.c from Kumar Gala <galak@kernel.crashing.org>
+ * i2c-virtual.c from Ken Harrenstien, Copyright (c) 2004 Google, Inc.
+ * i2c-virtual.c from Brian Kuschak <bkuschak@yahoo.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+
+/* multiplexer per channel data */
+struct i2c_mux_priv {
+ struct i2c_adapter adap;
+ struct i2c_algorithm algo;
+
+ struct i2c_adapter *parent;
+ void *mux_dev; /* the mux chip/device */
+ u32 chan_id; /* the channel id */
+
+ int (*select)(struct i2c_adapter *, void *mux_dev, u32 chan_id);
+ int (*deselect)(struct i2c_adapter *, void *mux_dev, u32 chan_id);
+};
+
+static int i2c_mux_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct i2c_mux_priv *priv = adap->algo_data;
+ struct i2c_adapter *parent = priv->parent;
+ int ret;
+
+ /* Switch to the right mux port and perform the transfer. */
+
+ ret = priv->select(parent, priv->mux_dev, priv->chan_id);
+ if (ret >= 0)
+ ret = parent->algo->master_xfer(parent, msgs, num);
+ if (priv->deselect)
+ priv->deselect(parent, priv->mux_dev, priv->chan_id);
+
+ return ret;
+}
+
+static int i2c_mux_smbus_xfer(struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
+{
+ struct i2c_mux_priv *priv = adap->algo_data;
+ struct i2c_adapter *parent = priv->parent;
+ int ret;
+
+ /* Select the right mux port and perform the transfer. */
+
+ ret = priv->select(parent, priv->mux_dev, priv->chan_id);
+ if (ret >= 0)
+ ret = parent->algo->smbus_xfer(parent, addr, flags,
+ read_write, command, size, data);
+ if (priv->deselect)
+ priv->deselect(parent, priv->mux_dev, priv->chan_id);
+
+ return ret;
+}
+
+/* Return the parent's functionality */
+static u32 i2c_mux_functionality(struct i2c_adapter *adap)
+{
+ struct i2c_mux_priv *priv = adap->algo_data;
+ struct i2c_adapter *parent = priv->parent;
+
+ return parent->algo->functionality(parent);
+}
+
+struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
+ void *mux_dev, u32 force_nr, u32 chan_id,
+ int (*select) (struct i2c_adapter *,
+ void *, u32),
+ int (*deselect) (struct i2c_adapter *,
+ void *, u32))
+{
+ struct i2c_mux_priv *priv;
+ int ret;
+
+ priv = kzalloc(sizeof(struct i2c_mux_priv), GFP_KERNEL);
+ if (!priv)
+ return NULL;
+
+ /* Set up private adapter data */
+ priv->parent = parent;
+ priv->mux_dev = mux_dev;
+ priv->chan_id = chan_id;
+ priv->select = select;
+ priv->deselect = deselect;
+
+ /* Need to do algo dynamically because we don't know ahead
+ * of time what sort of physical adapter we'll be dealing with.
+ */
+ if (parent->algo->master_xfer)
+ priv->algo.master_xfer = i2c_mux_master_xfer;
+ if (parent->algo->smbus_xfer)
+ priv->algo.smbus_xfer = i2c_mux_smbus_xfer;
+ priv->algo.functionality = i2c_mux_functionality;
+
+ /* Now fill out new adapter structure */
+ snprintf(priv->adap.name, sizeof(priv->adap.name),
+ "i2c-%d-mux (chan_id %d)", i2c_adapter_id(parent), chan_id);
+ priv->adap.owner = THIS_MODULE;
+ priv->adap.id = parent->id;
+ priv->adap.algo = &priv->algo;
+ priv->adap.algo_data = priv;
+ priv->adap.dev.parent = &parent->dev;
+
+ if (force_nr) {
+ priv->adap.nr = force_nr;
+ ret = i2c_add_numbered_adapter(&priv->adap);
+ } else {
+ ret = i2c_add_adapter(&priv->adap);
+ }
+ if (ret < 0) {
+ dev_err(&parent->dev,
+ "failed to add mux-adapter (error=%d)\n",
+ ret);
+ kfree(priv);
+ return NULL;
+ }
+
+ dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
+ i2c_adapter_id(&priv->adap));
+
+ return &priv->adap;
+}
+EXPORT_SYMBOL_GPL(i2c_add_mux_adapter);
+
+int i2c_del_mux_adapter(struct i2c_adapter *adap)
+{
+ struct i2c_mux_priv *priv = adap->algo_data;
+ int ret;
+
+ ret = i2c_del_adapter(adap);
+ if (ret < 0)
+ return ret;
+ kfree(priv);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(i2c_del_mux_adapter);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("I2C driver for multiplexed I2C busses");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+#
+# Multiplexer I2C chip drivers configuration
+#
+
+menu "Multiplexer I2C Chip support"
+ depends on I2C_MUX
+
+config I2C_MUX_PCA954x
+ tristate "Philips PCA954x I2C Mux/switches"
+ depends on EXPERIMENTAL
+ help
+ If you say yes here you get support for the Philips PCA954x
+ I2C mux/switch devices.
+
+ This driver can also be built as a module. If so, the module
+ will be called pca954x.
+
+endmenu
--- /dev/null
+#
+# Makefile for multiplexer I2C chip drivers.
+
+obj-$(CONFIG_I2C_MUX_PCA954x) += pca954x.o
+
+ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
--- /dev/null
+/*
+ * I2C multiplexer
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This module supports the PCA954x series of I2C multiplexer/switch chips
+ * made by Philips Semiconductors.
+ * This includes the:
+ * PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547
+ * and PCA9548.
+ *
+ * These chips are all controlled via the I2C bus itself, and all have a
+ * single 8-bit register. The upstream "parent" bus fans out to two,
+ * four, or eight downstream busses or channels; which of these
+ * are selected is determined by the chip type and register contents. A
+ * mux can select only one sub-bus at a time; a switch can select any
+ * combination simultaneously.
+ *
+ * Based on:
+ * pca954x.c from Kumar Gala <galak@kernel.crashing.org>
+ * Copyright (C) 2006
+ *
+ * Based on:
+ * pca954x.c from Ken Harrenstien
+ * Copyright (C) 2004 Google, Inc. (Ken Harrenstien)
+ *
+ * Based on:
+ * i2c-virtual_cb.c from Brian Kuschak <bkuschak@yahoo.com>
+ * and
+ * pca9540.c from Jean Delvare <khali@linux-fr.org>.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+
+#include <linux/i2c/pca954x.h>
+
+#define PCA954X_MAX_NCHANS 8
+
+enum pca_type {
+ pca_9540,
+ pca_9542,
+ pca_9543,
+ pca_9544,
+ pca_9545,
+ pca_9546,
+ pca_9547,
+ pca_9548,
+};
+
+struct pca954x {
+ enum pca_type type;
+ struct i2c_adapter *virt_adaps[PCA954X_MAX_NCHANS];
+
+ u8 last_chan; /* last register value */
+};
+
+struct chip_desc {
+ u8 nchans;
+ u8 enable; /* used for muxes only */
+ enum muxtype {
+ pca954x_ismux = 0,
+ pca954x_isswi
+ } muxtype;
+};
+
+/* Provide specs for the PCA954x types we know about */
+static const struct chip_desc chips[] = {
+ [pca_9540] = {
+ .nchans = 2,
+ .enable = 0x4,
+ .muxtype = pca954x_ismux,
+ },
+ [pca_9543] = {
+ .nchans = 2,
+ .muxtype = pca954x_isswi,
+ },
+ [pca_9544] = {
+ .nchans = 4,
+ .enable = 0x4,
+ .muxtype = pca954x_ismux,
+ },
+ [pca_9545] = {
+ .nchans = 4,
+ .muxtype = pca954x_isswi,
+ },
+ [pca_9547] = {
+ .nchans = 8,
+ .enable = 0x8,
+ .muxtype = pca954x_ismux,
+ },
+ [pca_9548] = {
+ .nchans = 8,
+ .muxtype = pca954x_isswi,
+ },
+};
+
+static const struct i2c_device_id pca954x_id[] = {
+ { "pca9540", pca_9540 },
+ { "pca9542", pca_9540 },
+ { "pca9543", pca_9543 },
+ { "pca9544", pca_9544 },
+ { "pca9545", pca_9545 },
+ { "pca9546", pca_9545 },
+ { "pca9547", pca_9547 },
+ { "pca9548", pca_9548 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pca954x_id);
+
+/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer()
+ for this as they will try to lock adapter a second time */
+static int pca954x_reg_write(struct i2c_adapter *adap,
+ struct i2c_client *client, u8 val)
+{
+ int ret = -ENODEV;
+
+ if (adap->algo->master_xfer) {
+ struct i2c_msg msg;
+ char buf[1];
+
+ msg.addr = client->addr;
+ msg.flags = 0;
+ msg.len = 1;
+ buf[0] = val;
+ msg.buf = buf;
+ ret = adap->algo->master_xfer(adap, &msg, 1);
+ } else {
+ union i2c_smbus_data data;
+ ret = adap->algo->smbus_xfer(adap, client->addr,
+ client->flags,
+ I2C_SMBUS_WRITE,
+ val, I2C_SMBUS_BYTE, &data);
+ }
+
+ return ret;
+}
+
+static int pca954x_select_chan(struct i2c_adapter *adap,
+ void *client, u32 chan)
+{
+ struct pca954x *data = i2c_get_clientdata(client);
+ const struct chip_desc *chip = &chips[data->type];
+ u8 regval;
+ int ret = 0;
+
+ /* we make switches look like muxes, not sure how to be smarter */
+ if (chip->muxtype == pca954x_ismux)
+ regval = chan | chip->enable;
+ else
+ regval = 1 << chan;
+
+ /* Only select the channel if its different from the last channel */
+ if (data->last_chan != regval) {
+ ret = pca954x_reg_write(adap, client, regval);
+ data->last_chan = regval;
+ }
+
+ return ret;
+}
+
+static int pca954x_deselect_mux(struct i2c_adapter *adap,
+ void *client, u32 chan)
+{
+ struct pca954x *data = i2c_get_clientdata(client);
+
+ /* Deselect active channel */
+ data->last_chan = 0;
+ return pca954x_reg_write(adap, client, data->last_chan);
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+static int __devinit pca954x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
+ struct pca954x_platform_data *pdata = client->dev.platform_data;
+ int num, force;
+ struct pca954x *data;
+ int ret = -ENODEV;
+
+ if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
+ goto err;
+
+ data = kzalloc(sizeof(struct pca954x), GFP_KERNEL);
+ if (!data) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ i2c_set_clientdata(client, data);
+
+ /* Read the mux register at addr to verify
+ * that the mux is in fact present.
+ */
+ if (i2c_smbus_read_byte(client) < 0) {
+ dev_warn(&client->dev, "probe failed\n");
+ goto exit_free;
+ }
+
+ data->type = id->driver_data;
+ data->last_chan = 0; /* force the first selection */
+
+ /* Now create an adapter for each channel */
+ for (num = 0; num < chips[data->type].nchans; num++) {
+ force = 0; /* dynamic adap number */
+ if (pdata) {
+ if (num < pdata->num_modes)
+ /* force static number */
+ force = pdata->modes[num].adap_id;
+ else
+ /* discard unconfigured channels */
+ break;
+ }
+
+ data->virt_adaps[num] =
+ i2c_add_mux_adapter(adap, client,
+ force, num, pca954x_select_chan,
+ (pdata && pdata->modes[num].deselect_on_exit)
+ ? pca954x_deselect_mux : NULL);
+
+ if (data->virt_adaps[num] == NULL) {
+ ret = -ENODEV;
+ dev_err(&client->dev,
+ "failed to register multiplexed adapter"
+ " %d as bus %d\n", num, force);
+ goto virt_reg_failed;
+ }
+ }
+
+ dev_info(&client->dev,
+ "registered %d multiplexed busses for I2C %s %s\n",
+ num, chips[data->type].muxtype == pca954x_ismux
+ ? "mux" : "switch", client->name);
+
+ return 0;
+
+virt_reg_failed:
+ for (num--; num >= 0; num--)
+ i2c_del_mux_adapter(data->virt_adaps[num]);
+exit_free:
+ kfree(data);
+err:
+ return ret;
+}
+
+static int __devexit pca954x_remove(struct i2c_client *client)
+{
+ struct pca954x *data = i2c_get_clientdata(client);
+ const struct chip_desc *chip = &chips[data->type];
+ int i, err;
+
+ for (i = 0; i < chip->nchans; ++i)
+ if (data->virt_adaps[i]) {
+ err = i2c_del_mux_adapter(data->virt_adaps[i]);
+ if (err)
+ return err;
+ data->virt_adaps[i] = NULL;
+ }
+
+ kfree(data);
+ return 0;
+}
+
+static struct i2c_driver pca954x_driver = {
+ .driver = {
+ .name = "pca954x",
+ .owner = THIS_MODULE,
+ },
+ .probe = pca954x_probe,
+ .remove = __devexit_p(pca954x_remove),
+ .id_table = pca954x_id,
+};
+
+static int __init pca954x_init(void)
+{
+ return i2c_add_driver(&pca954x_driver);
+}
+
+static void __exit pca954x_exit(void)
+{
+ i2c_del_driver(&pca954x_driver);
+}
+
+module_init(pca954x_init);
+module_exit(pca954x_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("PCA954x I2C mux/switch driver");
+MODULE_LICENSE("GPL v2");
BUG_ON(sense_len > sizeof(*sense));
- if (blk_sense_request(rq) || drive->sense_rq_armed)
+ if (rq->cmd_type == REQ_TYPE_SENSE || drive->sense_rq_armed)
return;
memset(sense, 0, sizeof(*sense));
int ide_cd_get_xferlen(struct request *rq)
{
- if (blk_fs_request(rq))
+ switch (rq->cmd_type) {
+ case REQ_TYPE_FS:
return 32768;
- else if (blk_sense_request(rq) || blk_pc_request(rq) ||
- rq->cmd_type == REQ_TYPE_ATA_PC)
+ case REQ_TYPE_SENSE:
+ case REQ_TYPE_BLOCK_PC:
+ case REQ_TYPE_ATA_PC:
return blk_rq_bytes(rq);
- else
+ default:
return 0;
+ }
}
EXPORT_SYMBOL_GPL(ide_cd_get_xferlen);
if (uptodate == 0)
drive->failed_pc = NULL;
- if (blk_special_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_SPECIAL) {
rq->errors = 0;
error = 0;
} else {
- if (blk_fs_request(rq) == 0 && uptodate <= 0) {
+ if (rq->cmd_type != REQ_TYPE_FS && uptodate <= 0) {
if (rq->errors == 0)
rq->errors = -EIO;
}
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
if (!sense->valid)
break;
if (failed_command == NULL ||
- !blk_fs_request(failed_command))
+ failed_command->cmd_type != REQ_TYPE_FS)
break;
sector = (sense->information[0] << 24) |
(sense->information[1] << 16) |
"stat 0x%x",
rq->cmd[0], rq->cmd_type, err, stat);
- if (blk_sense_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_SENSE) {
/*
* We got an error trying to get sense info from the drive
* (probably while trying to recover from a former error).
}
/* if we have an error, pass CHECK_CONDITION as the SCSI status byte */
- if (blk_pc_request(rq) && !rq->errors)
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC && !rq->errors)
rq->errors = SAM_STAT_CHECK_CONDITION;
if (blk_noretry_request(rq))
switch (sense_key) {
case NOT_READY:
- if (blk_fs_request(rq) && rq_data_dir(rq) == WRITE) {
+ if (rq->cmd_type == REQ_TYPE_FS && rq_data_dir(rq) == WRITE) {
if (ide_cd_breathe(drive, rq))
return 1;
} else {
cdrom_saw_media_change(drive);
- if (blk_fs_request(rq) && !blk_rq_quiet(rq))
+ if (rq->cmd_type == REQ_TYPE_FS &&
+ !(rq->cmd_flags & REQ_QUIET))
printk(KERN_ERR PFX "%s: tray open\n",
drive->name);
}
case UNIT_ATTENTION:
cdrom_saw_media_change(drive);
- if (blk_fs_request(rq) == 0)
+ if (rq->cmd_type != REQ_TYPE_FS)
return 0;
/*
* No point in retrying after an illegal request or data
* protect error.
*/
- if (!blk_rq_quiet(rq))
+ if (!(rq->cmd_flags & REQ_QUIET))
ide_dump_status(drive, "command error", stat);
do_end_request = 1;
break;
* No point in re-trying a zillion times on a bad sector.
* If we got here the error is not correctable.
*/
- if (!blk_rq_quiet(rq))
+ if (!(rq->cmd_flags & REQ_QUIET))
ide_dump_status(drive, "media error "
"(bad sector)", stat);
do_end_request = 1;
break;
case BLANK_CHECK:
/* disk appears blank? */
- if (!blk_rq_quiet(rq))
+ if (!(rq->cmd_flags & REQ_QUIET))
ide_dump_status(drive, "media error (blank)",
stat);
do_end_request = 1;
break;
default:
- if (blk_fs_request(rq) == 0)
+ if (rq->cmd_type != REQ_TYPE_FS)
break;
if (err & ~ATA_ABORTED) {
/* go to the default handler for other errors */
do_end_request = 1;
}
- if (blk_fs_request(rq) == 0) {
+ if (rq->cmd_type != REQ_TYPE_FS) {
rq->cmd_flags |= REQ_FAILED;
do_end_request = 1;
}
ide_expiry_t *expiry = NULL;
int dma_error = 0, dma, thislen, uptodate = 0;
int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0;
- int sense = blk_sense_request(rq);
+ int sense = (rq->cmd_type == REQ_TYPE_SENSE);
unsigned int timeout;
u16 len;
u8 ireason, stat;
ide_read_bcount_and_ireason(drive, &len, &ireason);
- thislen = blk_fs_request(rq) ? len : cmd->nleft;
+ thislen = (rq->cmd_type == REQ_TYPE_FS) ? len : cmd->nleft;
if (thislen > len)
thislen = len;
/* If DRQ is clear, the command has completed. */
if ((stat & ATA_DRQ) == 0) {
- if (blk_fs_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_FS) {
/*
* If we're not done reading/writing, complain.
* Otherwise, complete the command normally.
rq->cmd_flags |= REQ_FAILED;
uptodate = 0;
}
- } else if (!blk_pc_request(rq)) {
+ } else if (rq->cmd_type != REQ_TYPE_BLOCK_PC) {
ide_cd_request_sense_fixup(drive, cmd);
uptodate = cmd->nleft ? 0 : 1;
/* pad, if necessary */
if (len > 0) {
- if (blk_fs_request(rq) == 0 || write == 0)
+ if (rq->cmd_type != REQ_TYPE_FS || write == 0)
ide_pad_transfer(drive, write, len);
else {
printk(KERN_ERR PFX "%s: confused, missing data\n",
}
}
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
timeout = rq->timeout;
} else {
timeout = ATAPI_WAIT_PC;
- if (!blk_fs_request(rq))
+ if (rq->cmd_type != REQ_TYPE_FS)
expiry = ide_cd_expiry;
}
return ide_started;
out_end:
- if (blk_pc_request(rq) && rc == 0) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC && rc == 0) {
rq->resid_len = 0;
blk_end_request_all(rq, 0);
hwif->rq = NULL;
if (sense && uptodate)
ide_cd_complete_failed_rq(drive, rq);
- if (blk_fs_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_FS) {
if (cmd->nleft == 0)
uptodate = 1;
} else {
return ide_stopped;
/* make sure it's fully ended */
- if (blk_fs_request(rq) == 0) {
+ if (rq->cmd_type != REQ_TYPE_FS) {
rq->resid_len -= cmd->nbytes - cmd->nleft;
if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE))
rq->resid_len += cmd->last_xfer_len;
ide_debug_log(IDE_DBG_PC, "rq->cmd[0]: 0x%x, rq->cmd_type: 0x%x",
rq->cmd[0], rq->cmd_type);
- if (blk_pc_request(rq))
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
rq->cmd_flags |= REQ_QUIET;
else
rq->cmd_flags &= ~REQ_FAILED;
if (drive->debug_mask & IDE_DBG_RQ)
blk_dump_rq_flags(rq, "ide_cd_do_request");
- if (blk_fs_request(rq)) {
+ switch (rq->cmd_type) {
+ case REQ_TYPE_FS:
if (cdrom_start_rw(drive, rq) == ide_stopped)
goto out_end;
- } else if (blk_sense_request(rq) || blk_pc_request(rq) ||
- rq->cmd_type == REQ_TYPE_ATA_PC) {
+ break;
+ case REQ_TYPE_SENSE:
+ case REQ_TYPE_BLOCK_PC:
+ case REQ_TYPE_ATA_PC:
if (!rq->timeout)
rq->timeout = ATAPI_WAIT_PC;
cdrom_do_block_pc(drive, rq);
- } else if (blk_special_request(rq)) {
+ break;
+ case REQ_TYPE_SPECIAL:
/* right now this can only be a reset... */
uptodate = 1;
goto out_end;
- } else
+ default:
BUG();
+ }
/* prepare sense request for this command */
ide_prep_sense(drive, rq);
cmd.rq = rq;
- if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
+ if (rq->cmd_type == REQ_TYPE_FS || blk_rq_bytes(rq)) {
ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
ide_map_sg(drive, &cmd);
}
static int ide_cdrom_prep_fn(struct request_queue *q, struct request *rq)
{
- if (blk_fs_request(rq))
+ if (rq->cmd_type == REQ_TYPE_FS)
return ide_cdrom_prep_fs(q, rq);
- else if (blk_pc_request(rq))
+ else if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
return ide_cdrom_prep_pc(rq);
return 0;
static int idecd_open(struct block_device *bdev, fmode_t mode)
{
- struct cdrom_info *info = ide_cd_get(bdev->bd_disk);
- int rc = -ENOMEM;
+ struct cdrom_info *info;
+ int rc = -ENXIO;
+ lock_kernel();
+ info = ide_cd_get(bdev->bd_disk);
if (!info)
- return -ENXIO;
+ goto out;
rc = cdrom_open(&info->devinfo, bdev, mode);
-
if (rc < 0)
ide_cd_put(info);
-
+out:
+ unlock_kernel();
return rc;
}
{
struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
+ lock_kernel();
cdrom_release(&info->devinfo, mode);
ide_cd_put(info);
+ unlock_kernel();
return 0;
}
return 0;
}
-static int idecd_ioctl(struct block_device *bdev, fmode_t mode,
+static int idecd_locked_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
struct cdrom_info *info = ide_drv_g(bdev->bd_disk, cdrom_info);
return err;
}
+static int idecd_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret;
+
+ lock_kernel();
+ ret = idecd_locked_ioctl(bdev, mode, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
+
static int idecd_media_changed(struct gendisk *disk)
{
struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
.owner = THIS_MODULE,
.open = idecd_open,
.release = idecd_release,
- .locked_ioctl = idecd_ioctl,
+ .ioctl = idecd_ioctl,
.media_changed = idecd_media_changed,
.revalidate_disk = idecd_revalidate_disk
};
touch it at all. */
if (cgc->data_direction == CGC_DATA_WRITE)
- flags |= REQ_RW;
+ flags |= REQ_WRITE;
if (cgc->sense)
memset(cgc->sense, 0, sizeof(struct request_sense));
ide_hwif_t *hwif = drive->hwif;
BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
- BUG_ON(!blk_fs_request(rq));
+ BUG_ON(rq->cmd_type != REQ_TYPE_FS);
ledtrig_ide_activity();
drive->dev_flags |= IDE_DFLAG_NOHPA; /* disable HPA on resume */
}
-static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
+static int idedisk_prep_fn(struct request_queue *q, struct request *rq)
{
ide_drive_t *drive = q->queuedata;
- struct ide_cmd *cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC);
+ struct ide_cmd *cmd;
+
+ if (!(rq->cmd_flags & REQ_FLUSH))
+ return BLKPREP_OK;
+
+ cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC);
/* FIXME: map struct ide_taskfile on rq->cmd[] */
BUG_ON(cmd == NULL);
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
rq->special = cmd;
cmd->rq = rq;
+
+ return BLKPREP_OK;
}
ide_devset_get(multcount, mult_count);
{
u16 *id = drive->id;
unsigned ordered = QUEUE_ORDERED_NONE;
- prepare_flush_fn *prep_fn = NULL;
if (drive->dev_flags & IDE_DFLAG_WCACHE) {
unsigned long long capacity;
if (barrier) {
ordered = QUEUE_ORDERED_DRAIN_FLUSH;
- prep_fn = idedisk_prepare_flush;
+ blk_queue_prep_rq(drive->queue, idedisk_prep_fn);
}
} else
ordered = QUEUE_ORDERED_DRAIN;
- blk_queue_ordered(drive->queue, ordered, prep_fn);
+ blk_queue_ordered(drive->queue, ordered);
}
ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
#include <linux/kernel.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
+#include <linux/smp_lock.h>
#include "ide-disk.h"
{
int err;
+ lock_kernel();
err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);
if (err != -EOPNOTSUPP)
- return err;
+ goto out;
- return generic_ide_ioctl(drive, bdev, cmd, arg);
+ err = generic_ide_ioctl(drive, bdev, cmd, arg);
+out:
+ unlock_kernel();
+ return err;
}
return ide_stopped;
/* retry only "normal" I/O: */
- if (!blk_fs_request(rq)) {
+ if (rq->cmd_type != REQ_TYPE_FS) {
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
struct ide_cmd *cmd = rq->special;
{
struct request *rq = drive->hwif->rq;
- if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) {
+ if (rq && rq->cmd_type == REQ_TYPE_SPECIAL &&
+ rq->cmd[0] == REQ_DRIVE_RESET) {
if (err <= 0 && rq->errors == 0)
rq->errors = -EIO;
ide_complete_rq(drive, err ? err : 0, blk_rq_bytes(rq));
drive->failed_pc = NULL;
if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
- (rq && blk_pc_request(rq)))
+ (rq && rq->cmd_type == REQ_TYPE_BLOCK_PC))
uptodate = 1; /* FIXME */
else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
"Aborting request!\n");
}
- if (blk_special_request(rq))
+ if (rq->cmd_type == REQ_TYPE_SPECIAL)
rq->errors = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
return uptodate;
memcpy(rq->cmd, pc->c, 12);
pc->rq = rq;
- if (rq->cmd_flags & REQ_RW)
+ if (rq->cmd_flags & REQ_WRITE)
pc->flags |= PC_FLAG_WRITING;
pc->flags |= PC_FLAG_DMA_OK;
} else
printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
- if (blk_special_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_SPECIAL) {
rq->errors = 0;
ide_complete_rq(drive, 0, blk_rq_bytes(rq));
return ide_stopped;
} else
goto out_end;
}
- if (blk_fs_request(rq)) {
+
+ switch (rq->cmd_type) {
+ case REQ_TYPE_FS:
if (((long)blk_rq_pos(rq) % floppy->bs_factor) ||
(blk_rq_sectors(rq) % floppy->bs_factor)) {
printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
}
pc = &floppy->queued_pc;
idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
- } else if (blk_special_request(rq) || blk_sense_request(rq)) {
+ break;
+ case REQ_TYPE_SPECIAL:
+ case REQ_TYPE_SENSE:
pc = (struct ide_atapi_pc *)rq->special;
- } else if (blk_pc_request(rq)) {
+ break;
+ case REQ_TYPE_BLOCK_PC:
pc = &floppy->queued_pc;
idefloppy_blockpc_cmd(floppy, pc, rq);
- } else
+ break;
+ default:
BUG();
+ }
ide_prep_sense(drive, rq);
cmd.rq = rq;
- if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
+ if (rq->cmd_type == REQ_TYPE_FS || blk_rq_bytes(rq)) {
ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
ide_map_sg(drive, &cmd);
}
return ide_floppy_issue_pc(drive, &cmd, pc);
out_end:
drive->failed_pc = NULL;
- if (blk_fs_request(rq) == 0 && rq->errors == 0)
+ if (rq->cmd_type != REQ_TYPE_FS && rq->errors == 0)
rq->errors = -EIO;
ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
return ide_stopped;
#include <linux/kernel.h>
#include <linux/ide.h>
#include <linux/cdrom.h>
+#include <linux/smp_lock.h>
#include <asm/unaligned.h>
void __user *argp = (void __user *)arg;
int err;
- if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
- return ide_floppy_lockdoor(drive, &pc, arg, cmd);
+ lock_kernel();
+ if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR) {
+ err = ide_floppy_lockdoor(drive, &pc, arg, cmd);
+ goto out;
+ }
err = ide_floppy_format_ioctl(drive, &pc, mode, cmd, argp);
if (err != -ENOTTY)
- return err;
+ goto out;
/*
* skip SCSI_IOCTL_SEND_COMMAND (deprecated)
if (err == -ENOTTY)
err = generic_ide_ioctl(drive, bdev, cmd, arg);
+out:
+ unlock_kernel();
return err;
}
+#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
return ret;
}
+static int ide_gd_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = ide_gd_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
+
static int ide_gd_release(struct gendisk *disk, fmode_t mode)
{
struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
ide_debug_log(IDE_DBG_FUNC, "enter");
+ lock_kernel();
if (idkp->openers == 1)
drive->disk_ops->flush(drive);
idkp->openers--;
ide_disk_put(idkp);
+ unlock_kernel();
return 0;
}
static const struct block_device_operations ide_gd_ops = {
.owner = THIS_MODULE,
- .open = ide_gd_open,
+ .open = ide_gd_unlocked_open,
.release = ide_gd_release,
- .locked_ioctl = ide_gd_ioctl,
+ .ioctl = ide_gd_ioctl,
.getgeo = ide_gd_getgeo,
.media_changed = ide_gd_media_changed,
.unlock_native_capacity = ide_gd_unlock_native_capacity,
void ide_kill_rq(ide_drive_t *drive, struct request *rq)
{
- u8 drv_req = blk_special_request(rq) && rq->rq_disk;
+ u8 drv_req = (rq->cmd_type == REQ_TYPE_SPECIAL) && rq->rq_disk;
u8 media = drive->media;
drive->failed_pc = NULL;
} else {
if (media == ide_tape)
rq->errors = IDE_DRV_ERROR_GENERAL;
- else if (blk_fs_request(rq) == 0 && rq->errors == 0)
+ else if (rq->cmd_type != REQ_TYPE_FS && rq->errors == 0)
rq->errors = -EIO;
}
{
ide_startstop_t startstop;
- BUG_ON(!blk_rq_started(rq));
+ BUG_ON(!(rq->cmd_flags & REQ_STARTED));
#ifdef DEBUG
printk("%s: start_request: current=0x%08lx\n",
pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_rq(drive, rq);
return startstop;
- } else if (!rq->rq_disk && blk_special_request(rq))
+ } else if (!rq->rq_disk && rq->cmd_type == REQ_TYPE_SPECIAL)
/*
* TODO: Once all ULDs have been modified to
* check for specific op codes rather than
#ifdef DEBUG_PM
printk("%s: completing PM request, %s\n", drive->name,
- blk_pm_suspend_request(rq) ? "suspend" : "resume");
+ (rq->cmd_type == REQ_TYPE_PM_SUSPEND) ? "suspend" : "resume");
#endif
spin_lock_irqsave(q->queue_lock, flags);
- if (blk_pm_suspend_request(rq))
+ if (rq->cmd_type == REQ_TYPE_PM_SUSPEND)
blk_stop_queue(q);
else
drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
{
struct request_pm_state *pm = rq->special;
- if (blk_pm_suspend_request(rq) &&
+ if (rq->cmd_type == REQ_TYPE_PM_SUSPEND &&
pm->pm_step == IDE_PM_START_SUSPEND)
/* Mark drive blocked when starting the suspend sequence. */
drive->dev_flags |= IDE_DFLAG_BLOCKED;
- else if (blk_pm_resume_request(rq) &&
+ else if (rq->cmd_type == REQ_TYPE_PM_RESUME &&
pm->pm_step == IDE_PM_START_RESUME) {
/*
* The first thing we do on wakeup is to wait for BSY bit to
#include <linux/errno.h>
#include <linux/genhd.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/ide.h>
rq->cmd[0], (unsigned long long)blk_rq_pos(rq),
blk_rq_sectors(rq));
- BUG_ON(!(blk_special_request(rq) || blk_sense_request(rq)));
+ BUG_ON(!(rq->cmd_type == REQ_TYPE_SPECIAL ||
+ rq->cmd_type == REQ_TYPE_SENSE));
/* Retry a failed packet command */
if (drive->failed_pc && drive->pc->c[0] == REQUEST_SENSE) {
static int idetape_open(struct block_device *bdev, fmode_t mode)
{
- struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk, false, 0);
+ struct ide_tape_obj *tape;
+
+ lock_kernel();
+ tape = ide_tape_get(bdev->bd_disk, false, 0);
+ unlock_kernel();
if (!tape)
return -ENXIO;
{
struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj);
+ lock_kernel();
ide_tape_put(tape);
+ unlock_kernel();
+
return 0;
}
{
struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj);
ide_drive_t *drive = tape->drive;
- int err = generic_ide_ioctl(drive, bdev, cmd, arg);
+ int err;
+
+ lock_kernel();
+ err = generic_ide_ioctl(drive, bdev, cmd, arg);
if (err == -EINVAL)
err = idetape_blkdev_ioctl(drive, cmd, arg);
+ unlock_kernel();
+
return err;
}
.owner = THIS_MODULE,
.open = idetape_open,
.release = idetape_release,
- .locked_ioctl = idetape_ioctl,
+ .ioctl = idetape_ioctl,
};
static int ide_tape_probe(ide_drive_t *drive)
module_param_named(pci_clock, ide_pci_clk, int, 0);
MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)");
-static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp)
+static int ide_set_dev_param_mask(const char *s, const struct kernel_param *kp)
{
int a, b, i, j = 1;
unsigned int *dev_param_mask = (unsigned int *)kp->arg;
return 0;
}
+static struct kernel_param_ops param_ops_ide_dev_mask = {
+ .set = ide_set_dev_param_mask
+};
+
+#define param_check_ide_dev_mask(name, p) param_check_uint(name, p)
+
static unsigned int ide_nodma;
-module_param_call(nodma, ide_set_dev_param_mask, NULL, &ide_nodma, 0);
+module_param_named(nodma, ide_nodma, ide_dev_mask, 0);
MODULE_PARM_DESC(nodma, "disallow DMA for a device");
static unsigned int ide_noflush;
-module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0);
+module_param_named(noflush, ide_noflush, ide_dev_mask, 0);
MODULE_PARM_DESC(noflush, "disable flush requests for a device");
static unsigned int ide_nohpa;
-module_param_call(nohpa, ide_set_dev_param_mask, NULL, &ide_nohpa, 0);
+module_param_named(nohpa, ide_nohpa, ide_dev_mask, 0);
MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device");
static unsigned int ide_noprobe;
-module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0);
+module_param_named(noprobe, ide_noprobe, ide_dev_mask, 0);
MODULE_PARM_DESC(noprobe, "skip probing for a device");
static unsigned int ide_nowerr;
-module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0);
+module_param_named(nowerr, ide_nowerr, ide_dev_mask, 0);
MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device");
static unsigned int ide_cdroms;
-module_param_call(cdrom, ide_set_dev_param_mask, NULL, &ide_cdroms, 0);
+module_param_named(cdrom, ide_cdroms, ide_dev_mask, 0);
MODULE_PARM_DESC(cdrom, "force device as a CD-ROM");
struct chs_geom {
config INTEL_IDLE
- tristate "Cpuidle Driver for Intel Processors"
+ bool "Cpuidle Driver for Intel Processors"
depends on CPU_IDLE
depends on X86
depends on CPU_SUP_INTEL
- depends on EXPERIMENTAL
help
Enable intel_idle, a cpuidle driver that includes knowledge of
native Intel hardware idle features. The acpi_idle driver
};
/* intel_idle.max_cstate=0 disables driver */
static int max_cstate = MWAIT_MAX_NUM_CSTATES - 1;
-static int power_policy = 7; /* 0 = max perf; 15 = max powersave */
-static unsigned int substates;
-static int (*choose_substate)(int);
+static unsigned int mwait_substates;
/* Reliable LAPIC Timer States, bit 1 for C1 etc. */
static unsigned int lapic_timer_reliable_states;
.enter = NULL }, /* disabled */
};
-/*
- * choose_tunable_substate()
- *
- * Run-time decision on which C-state substate to invoke
- * If power_policy = 0, choose shallowest substate (0)
- * If power_policy = 15, choose deepest substate
- * If power_policy = middle, choose middle substate etc.
- */
-static int choose_tunable_substate(int cstate)
-{
- unsigned int num_substates;
- unsigned int substate_choice;
-
- power_policy &= 0xF; /* valid range: 0-15 */
- cstate &= 7; /* valid range: 0-7 */
-
- num_substates = (substates >> ((cstate) * 4)) & MWAIT_SUBSTATE_MASK;
-
- if (num_substates <= 1)
- return 0;
-
- substate_choice = ((power_policy + (power_policy + 1) *
- (num_substates - 1)) / 16);
-
- return substate_choice;
-}
-
-/*
- * choose_zero_substate()
- */
-static int choose_zero_substate(int cstate)
-{
- return 0;
-}
-
/**
* intel_idle
* @dev: cpuidle_device
cstate = (((eax) >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK) + 1;
- eax = eax + (choose_substate)(cstate);
-
local_irq_disable();
if (!(lapic_timer_reliable_states & (1 << (cstate))))
*/
static int intel_idle_probe(void)
{
- unsigned int eax, ebx, ecx, edx;
+ unsigned int eax, ebx, ecx;
if (max_cstate == 0) {
pr_debug(PREFIX "disabled\n");
if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
return -ENODEV;
- cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
+ cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &mwait_substates);
if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
!(ecx & CPUID5_ECX_INTERRUPT_BREAK))
return -ENODEV;
-#ifdef DEBUG
- if (substates == 0) /* can over-ride via modparam */
-#endif
- substates = edx;
- pr_debug(PREFIX "MWAIT substates: 0x%x\n", substates);
+ pr_debug(PREFIX "MWAIT substates: 0x%x\n", mwait_substates);
if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
lapic_timer_reliable_states = 0xFFFFFFFF;
case 0x1E: /* Core i7 and i5 Processor - Lynnfield Jasper Forest */
case 0x1F: /* Core i7 and i5 Processor - Nehalem */
case 0x2E: /* Nehalem-EX Xeon */
+ case 0x2F: /* Westmere-EX Xeon */
lapic_timer_reliable_states = (1 << 1); /* C1 */
case 0x25: /* Westmere */
case 0x2C: /* Westmere */
cpuidle_state_table = nehalem_cstates;
- choose_substate = choose_tunable_substate;
break;
case 0x1C: /* 28 - Atom Processor */
+ case 0x26: /* 38 - Lincroft Atom Processor */
lapic_timer_reliable_states = (1 << 2) | (1 << 1); /* C2, C1 */
cpuidle_state_table = atom_cstates;
- choose_substate = choose_zero_substate;
break;
#ifdef FUTURE_USE
case 0x17: /* 23 - Core 2 Duo */
}
/* does the state exist in CPUID.MWAIT? */
- num_substates = (substates >> ((cstate) * 4))
+ num_substates = (mwait_substates >> ((cstate) * 4))
& MWAIT_SUBSTATE_MASK;
if (num_substates == 0)
continue;
module_init(intel_idle_init);
module_exit(intel_idle_exit);
-module_param(power_policy, int, 0644);
module_param(max_cstate, int, 0444);
-#ifdef DEBUG
-module_param(substates, int, 0444);
-#endif
MODULE_AUTHOR("Len Brown <len.brown@intel.com>");
MODULE_DESCRIPTION("Cpuidle driver for Intel Hardware v" INTEL_IDLE_VERSION);
rdev->cqshift = PAGE_SHIFT - ilog2(rdev->lldi.ucq_density);
rdev->cqmask = rdev->lldi.ucq_density - 1;
PDBG("%s dev %s stag start 0x%0x size 0x%0x num stags %d "
- "pbl start 0x%0x size 0x%0x rq start 0x%0x size 0x%0x\n",
+ "pbl start 0x%0x size 0x%0x rq start 0x%0x size 0x%0x "
+ "qp qid start %u size %u cq qid start %u size %u\n",
__func__, pci_name(rdev->lldi.pdev), rdev->lldi.vr->stag.start,
rdev->lldi.vr->stag.size, c4iw_num_stags(rdev),
rdev->lldi.vr->pbl.start,
rdev->lldi.vr->pbl.size, rdev->lldi.vr->rq.start,
- rdev->lldi.vr->rq.size);
+ rdev->lldi.vr->rq.size,
+ rdev->lldi.vr->qp.start,
+ rdev->lldi.vr->qp.size,
+ rdev->lldi.vr->cq.start,
+ rdev->lldi.vr->cq.size);
PDBG("udb len 0x%x udb base %p db_reg %p gts_reg %p qpshift %lu "
"qpmask 0x%x cqshift %lu cqmask 0x%x\n",
(unsigned)pci_resource_len(rdev->lldi.pdev, 2),
spin_lock_init(&rdev->resource.qid_fifo_lock);
- if (kfifo_alloc(&rdev->resource.qid_fifo, T4_MAX_QIDS * sizeof(u32),
- GFP_KERNEL))
+ if (kfifo_alloc(&rdev->resource.qid_fifo, rdev->lldi.vr->qp.size *
+ sizeof(u32), GFP_KERNEL))
return -ENOMEM;
- for (i = T4_QID_BASE; i < T4_QID_BASE + T4_MAX_QIDS; i++)
+ for (i = rdev->lldi.vr->qp.start;
+ i < rdev->lldi.vr->qp.start + rdev->lldi.vr->qp.size; i++)
if (!(i & rdev->qpmask))
kfifo_in(&rdev->resource.qid_fifo,
(unsigned char *) &i, sizeof(u32));
#include "t4_msg.h"
#include "t4fw_ri_api.h"
-#define T4_QID_BASE 1024
-#define T4_MAX_QIDS 256
#define T4_MAX_NUM_QP (1<<16)
#define T4_MAX_NUM_CQ (1<<15)
#define T4_MAX_NUM_PD (1<<15)
struct ehca_shca {
struct ib_device ib_device;
- struct of_device *ofdev;
+ struct platform_device *ofdev;
u8 num_ports;
int hw_level;
struct list_head shca_list;
.attrs = ehca_dev_attrs
};
-static int __devinit ehca_probe(struct of_device *dev,
+static int __devinit ehca_probe(struct platform_device *dev,
const struct of_device_id *id)
{
struct ehca_shca *shca;
return -EINVAL;
}
-static int __devexit ehca_remove(struct of_device *dev)
+static int __devexit ehca_remove(struct platform_device *dev)
{
struct ehca_shca *shca = dev_get_drvdata(&dev->dev);
unsigned long flags;
}
#define OLD_KEY_MAX 0x1ff
-static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user *p, int compat_mode)
+static int handle_eviocgbit(struct input_dev *dev,
+ unsigned int type, unsigned int size,
+ void __user *p, int compat_mode)
{
static unsigned long keymax_warn_time;
unsigned long *bits;
int len;
- switch (_IOC_NR(cmd) & EV_MAX) {
+ switch (type) {
case 0: bits = dev->evbit; len = EV_MAX; break;
case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
* EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len'
* should be in bytes, not in bits.
*/
- if ((_IOC_NR(cmd) & EV_MAX) == EV_KEY && _IOC_SIZE(cmd) == OLD_KEY_MAX) {
+ if (type == EV_KEY && size == OLD_KEY_MAX) {
len = OLD_KEY_MAX;
if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
printk(KERN_WARNING
BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
}
- return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
+ return bits_to_user(bits, len, size, p, compat_mode);
}
#undef OLD_KEY_MAX
struct ff_effect effect;
int __user *ip = (int __user *)p;
unsigned int i, t, u, v;
+ unsigned int size;
int error;
+ /* First we check for fixed-length commands */
switch (cmd) {
case EVIOCGVERSION:
return evdev_grab(evdev, client);
else
return evdev_ungrab(evdev, client);
+ }
- default:
-
- if (_IOC_TYPE(cmd) != 'E')
- return -EINVAL;
-
- if (_IOC_DIR(cmd) == _IOC_READ) {
+ size = _IOC_SIZE(cmd);
- if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0)))
- return handle_eviocgbit(dev, cmd, p, compat_mode);
+ /* Now check variable-length commands */
+#define EVIOC_MASK_SIZE(nr) ((nr) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT))
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0)))
- return bits_to_user(dev->key, KEY_MAX, _IOC_SIZE(cmd),
- p, compat_mode);
+ switch (EVIOC_MASK_SIZE(cmd)) {
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGLED(0)))
- return bits_to_user(dev->led, LED_MAX, _IOC_SIZE(cmd),
- p, compat_mode);
+ case EVIOCGKEY(0):
+ return bits_to_user(dev->key, KEY_MAX, size, p, compat_mode);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSND(0)))
- return bits_to_user(dev->snd, SND_MAX, _IOC_SIZE(cmd),
- p, compat_mode);
+ case EVIOCGLED(0):
+ return bits_to_user(dev->led, LED_MAX, size, p, compat_mode);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSW(0)))
- return bits_to_user(dev->sw, SW_MAX, _IOC_SIZE(cmd),
- p, compat_mode);
+ case EVIOCGSND(0):
+ return bits_to_user(dev->snd, SND_MAX, size, p, compat_mode);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0)))
- return str_to_user(dev->name, _IOC_SIZE(cmd), p);
+ case EVIOCGSW(0):
+ return bits_to_user(dev->sw, SW_MAX, size, p, compat_mode);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0)))
- return str_to_user(dev->phys, _IOC_SIZE(cmd), p);
+ case EVIOCGNAME(0):
+ return str_to_user(dev->name, size, p);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGUNIQ(0)))
- return str_to_user(dev->uniq, _IOC_SIZE(cmd), p);
+ case EVIOCGPHYS(0):
+ return str_to_user(dev->phys, size, p);
- if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) {
+ case EVIOCGUNIQ(0):
+ return str_to_user(dev->uniq, size, p);
- t = _IOC_NR(cmd) & ABS_MAX;
+ case EVIOC_MASK_SIZE(EVIOCSFF):
+ if (input_ff_effect_from_user(p, size, &effect))
+ return -EFAULT;
- abs.value = dev->abs[t];
- abs.minimum = dev->absmin[t];
- abs.maximum = dev->absmax[t];
- abs.fuzz = dev->absfuzz[t];
- abs.flat = dev->absflat[t];
- abs.resolution = dev->absres[t];
+ error = input_ff_upload(dev, &effect, file);
- if (copy_to_user(p, &abs, min_t(size_t,
- _IOC_SIZE(cmd),
- sizeof(struct input_absinfo))))
- return -EFAULT;
+ if (put_user(effect.id, &(((struct ff_effect __user *)p)->id)))
+ return -EFAULT;
- return 0;
- }
+ return error;
+ }
- }
+ /* Multi-number variable-length handlers */
+ if (_IOC_TYPE(cmd) != 'E')
+ return -EINVAL;
- if (_IOC_DIR(cmd) == _IOC_WRITE) {
+ if (_IOC_DIR(cmd) == _IOC_READ) {
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCSFF)) {
+ if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0)))
+ return handle_eviocgbit(dev,
+ _IOC_NR(cmd) & EV_MAX, size,
+ p, compat_mode);
- if (input_ff_effect_from_user(p, _IOC_SIZE(cmd), &effect))
- return -EFAULT;
+ if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) {
- error = input_ff_upload(dev, &effect, file);
+ t = _IOC_NR(cmd) & ABS_MAX;
+ abs = dev->absinfo[t];
- if (put_user(effect.id, &(((struct ff_effect __user *)p)->id)))
- return -EFAULT;
+ if (copy_to_user(p, &abs, min_t(size_t,
+ size, sizeof(struct input_absinfo))))
+ return -EFAULT;
- return error;
- }
+ return 0;
+ }
+ }
- if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) {
+ if (_IOC_DIR(cmd) == _IOC_READ) {
- t = _IOC_NR(cmd) & ABS_MAX;
+ if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) {
- if (copy_from_user(&abs, p, min_t(size_t,
- _IOC_SIZE(cmd),
- sizeof(struct input_absinfo))))
- return -EFAULT;
+ t = _IOC_NR(cmd) & ABS_MAX;
- /* We can't change number of reserved MT slots */
- if (t == ABS_MT_SLOT)
- return -EINVAL;
+ if (copy_from_user(&abs, p, min_t(size_t,
+ size, sizeof(struct input_absinfo))))
+ return -EFAULT;
- /*
- * Take event lock to ensure that we are not
- * changing device parameters in the middle
- * of event.
- */
- spin_lock_irq(&dev->event_lock);
+ if (size < sizeof(struct input_absinfo))
+ abs.resolution = 0;
- dev->abs[t] = abs.value;
- dev->absmin[t] = abs.minimum;
- dev->absmax[t] = abs.maximum;
- dev->absfuzz[t] = abs.fuzz;
- dev->absflat[t] = abs.flat;
- dev->absres[t] = _IOC_SIZE(cmd) < sizeof(struct input_absinfo) ?
- 0 : abs.resolution;
+ /* We can't change number of reserved MT slots */
+ if (t == ABS_MT_SLOT)
+ return -EINVAL;
- spin_unlock_irq(&dev->event_lock);
+ /*
+ * Take event lock to ensure that we are not
+ * changing device parameters in the middle
+ * of event.
+ */
+ spin_lock_irq(&dev->event_lock);
+ dev->absinfo[t] = abs;
+ spin_unlock_irq(&dev->event_lock);
- return 0;
- }
+ return 0;
}
}
+
return -EINVAL;
}
is_mt_event = code >= ABS_MT_FIRST && code <= ABS_MT_LAST;
if (!is_mt_event) {
- pold = &dev->abs[code];
+ pold = &dev->absinfo[code].value;
} else if (dev->mt) {
struct input_mt_slot *mtslot = &dev->mt[dev->slot];
pold = &mtslot->abs[code - ABS_MT_FIRST];
if (pold) {
*pval = input_defuzz_abs_event(*pval, *pold,
- dev->absfuzz[code]);
+ dev->absinfo[code].fuzz);
if (*pold == *pval)
return INPUT_IGNORE_EVENT;
}
/* Flush pending "slot" event */
- if (is_mt_event && dev->slot != dev->abs[ABS_MT_SLOT]) {
- dev->abs[ABS_MT_SLOT] = dev->slot;
+ if (is_mt_event && dev->slot != input_abs_get_val(dev, ABS_MT_SLOT)) {
+ input_abs_set_val(dev, ABS_MT_SLOT, dev->slot);
input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot);
}
}
EXPORT_SYMBOL(input_inject_event);
+/**
+ * input_alloc_absinfo - allocates array of input_absinfo structs
+ * @dev: the input device emitting absolute events
+ *
+ * If the absinfo struct the caller asked for is already allocated, this
+ * functions will not do anything.
+ */
+void input_alloc_absinfo(struct input_dev *dev)
+{
+ if (!dev->absinfo)
+ dev->absinfo = kcalloc(ABS_CNT, sizeof(struct input_absinfo),
+ GFP_KERNEL);
+
+ WARN(!dev->absinfo, "%s(): kcalloc() failed?\n", __func__);
+}
+EXPORT_SYMBOL(input_alloc_absinfo);
+
+void input_set_abs_params(struct input_dev *dev, unsigned int axis,
+ int min, int max, int fuzz, int flat)
+{
+ struct input_absinfo *absinfo;
+
+ input_alloc_absinfo(dev);
+ if (!dev->absinfo)
+ return;
+
+ absinfo = &dev->absinfo[axis];
+ absinfo->minimum = min;
+ absinfo->maximum = max;
+ absinfo->fuzz = fuzz;
+ absinfo->flat = flat;
+
+ dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
+}
+EXPORT_SYMBOL(input_set_abs_params);
+
+
/**
* input_grab_device - grabs device for exclusive use
* @handle: input handle that wants to own the device
input_ff_destroy(dev);
input_mt_destroy_slots(dev);
+ kfree(dev->absinfo);
kfree(dev);
module_put(THIS_MODULE);
{
struct input_dev *dev = joydev->handle.dev;
size_t len;
- int i, j;
+ int i;
const char *name;
/* Process fixed-sized commands. */
case JSIOCSCORR:
if (copy_from_user(joydev->corr, argp,
sizeof(joydev->corr[0]) * joydev->nabs))
- return -EFAULT;
+ return -EFAULT;
for (i = 0; i < joydev->nabs; i++) {
- j = joydev->abspam[i];
- joydev->abs[i] = joydev_correct(dev->abs[j],
- &joydev->corr[i]);
+ int val = input_abs_get_val(dev, joydev->abspam[i]);
+ joydev->abs[i] = joydev_correct(val, &joydev->corr[i]);
}
return 0;
for (i = 0; i < joydev->nabs; i++) {
j = joydev->abspam[i];
- if (dev->absmax[j] == dev->absmin[j]) {
+ if (input_abs_get_max(dev, j) == input_abs_get_min(dev, j)) {
joydev->corr[i].type = JS_CORR_NONE;
- joydev->abs[i] = dev->abs[j];
+ joydev->abs[i] = input_abs_get_val(dev, j);
continue;
}
joydev->corr[i].type = JS_CORR_BROKEN;
- joydev->corr[i].prec = dev->absfuzz[j];
- joydev->corr[i].coef[0] =
- (dev->absmax[j] + dev->absmin[j]) / 2 - dev->absflat[j];
- joydev->corr[i].coef[1] =
- (dev->absmax[j] + dev->absmin[j]) / 2 + dev->absflat[j];
+ joydev->corr[i].prec = input_abs_get_fuzz(dev, j);
+
+ t = (input_abs_get_max(dev, j) + input_abs_get_min(dev, j)) / 2;
+ joydev->corr[i].coef[0] = t - input_abs_get_flat(dev, j);
+ joydev->corr[i].coef[1] = t + input_abs_get_flat(dev, j);
- t = (dev->absmax[j] - dev->absmin[j]) / 2 - 2 * dev->absflat[j];
+ t = (input_abs_get_max(dev, j) - input_abs_get_min(dev, j)) / 2
+ - 2 * input_abs_get_flat(dev, j);
if (t) {
joydev->corr[i].coef[2] = (1 << 29) / t;
joydev->corr[i].coef[3] = (1 << 29) / t;
- joydev->abs[i] = joydev_correct(dev->abs[j],
- joydev->corr + i);
+ joydev->abs[i] =
+ joydev_correct(input_abs_get_val(dev, j),
+ joydev->corr + i);
}
}
for (i = 0; i < 4; i++) {
if (i < 2)
- input_set_abs_params(input_dev, axes[i], 48, input_dev->abs[axes[i]] * 2 - 48, 0, 8);
+ input_set_abs_params(input_dev, axes[i],
+ 48, input_abs_get_val(input_dev, axes[i]) * 2 - 48, 0, 8);
else
input_set_abs_params(input_dev, axes[i], 2, 253, 0, 0);
input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++) {
t = adi->abs[i];
- x = adi->dev->abs[t];
+ x = input_abs_get_val(adi->dev, t);
if (t == ABS_THROTTLE || t == ABS_RUDDER || adi->id == ADI_ID_WGPE)
x = i < adi->axes10 ? 512 : 128;
amijoy_dev[i]->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
for (j = 0; j < 2; j++) {
- amijoy_dev[i]->absmin[ABS_X + j] = -1;
- amijoy_dev[i]->absmax[ABS_X + j] = 1;
+ input_set_abs_params(amijoy_dev[i], ABS_X + j,
+ -1, 1, 0, 0);
}
err = input_register_device(amijoy_dev[i]);
for (i = 0; i < gf2k_axes[gf2k->id]; i++)
set_bit(gf2k_abs[i], input_dev->absbit);
- for (i = 0; i < gf2k_hats[gf2k->id]; i++) {
- set_bit(ABS_HAT0X + i, input_dev->absbit);
- input_dev->absmin[ABS_HAT0X + i] = -1;
- input_dev->absmax[ABS_HAT0X + i] = 1;
- }
+ for (i = 0; i < gf2k_hats[gf2k->id]; i++)
+ input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
for (i = 0; i < gf2k_joys[gf2k->id]; i++)
set_bit(gf2k_btn_joy[i], input_dev->keybit);
gf2k_read(gf2k, data);
for (i = 0; i < gf2k_axes[gf2k->id]; i++) {
- input_dev->absmax[gf2k_abs[i]] = (i < 2) ? input_dev->abs[gf2k_abs[i]] * 2 - 32 :
- input_dev->abs[gf2k_abs[0]] + input_dev->abs[gf2k_abs[1]] - 32;
- input_dev->absmin[gf2k_abs[i]] = 32;
- input_dev->absfuzz[gf2k_abs[i]] = 8;
- input_dev->absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0;
+ int max = i < 2 ?
+ input_abs_get_val(input_dev, gf2k_abs[i]) * 2 :
+ input_abs_get_val(input_dev, gf2k_abs[0]) +
+ input_abs_get_val(input_dev, gf2k_abs[1]);
+ int flat = i < 2 ? 24 : 0;
+
+ input_set_abs_params(input_dev, gf2k_abs[i],
+ 32, max - 32, 8, flat);
}
err = input_register_device(gf2k->dev);
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
for (i = 0; (t = interact_type[interact->type].abs[i]) >= 0; i++) {
- set_bit(t, input_dev->absbit);
- if (i < interact_type[interact->type].b8) {
- input_dev->absmin[t] = 0;
- input_dev->absmax[t] = 255;
- } else {
- input_dev->absmin[t] = -1;
- input_dev->absmax[t] = 1;
- }
+ if (i < interact_type[interact->type].b8)
+ input_set_abs_params(input_dev, t, 0, 255, 0, 0);
+ else
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
}
for (i = 0; (t = interact_type[interact->type].btn[i]) >= 0; i++)
- set_bit(t, input_dev->keybit);
+ __set_bit(t, input_dev->keybit);
err = input_register_device(interact->dev);
if (err)
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
for (j = 0; (bits = sw_bit[sw->type][j]); j++) {
+ int min, max, fuzz, flat;
+
code = sw_abs[sw->type][j];
- set_bit(code, input_dev->absbit);
- input_dev->absmax[code] = (1 << bits) - 1;
- input_dev->absmin[code] = (bits == 1) ? -1 : 0;
- input_dev->absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0;
- if (code != ABS_THROTTLE)
- input_dev->absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0;
+ min = bits == 1 ? -1 : 0;
+ max = (1 << bits) - 1;
+ fuzz = (bits >> 1) >= 2 ? 1 << ((bits >> 1) - 2) : 0;
+ flat = code == ABS_THROTTLE || bits < 5 ?
+ 0 : 1 << (bits - 5);
+
+ input_set_abs_params(input_dev, code,
+ min, max, fuzz, flat);
}
for (j = 0; (code = sw_btn[sw->type][j]); j++)
- set_bit(code, input_dev->keybit);
+ __set_bit(code, input_dev->keybit);
dbg("%s%s [%d-bit id %d data %d]\n", sw->name, comment, m, l, k);
{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
+config KEYBOARD_STMPE
+ tristate "STMPE keypad support"
+ depends on MFD_STMPE
+ help
+ Say Y here if you want to use the keypad controller on STMPE I/O
+ expanders.
+
+ To compile this driver as a module, choose M here: the module will be
+ called stmpe-keypad.
+
config KEYBOARD_DAVINCI
tristate "TI DaVinci Key Scan"
depends on ARCH_DAVINCI_DM365
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
+obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
struct input_dev *input;
struct mutex disable_lock;
unsigned int n_buttons;
+ int (*enable)(struct device *dev);
+ void (*disable)(struct device *dev);
struct gpio_button_data data[0];
};
return error;
}
+static int gpio_keys_open(struct input_dev *input)
+{
+ struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
+
+ return ddata->enable ? ddata->enable(input->dev.parent) : 0;
+}
+
+static void gpio_keys_close(struct input_dev *input)
+{
+ struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
+
+ if (ddata->disable)
+ ddata->disable(input->dev.parent);
+}
+
static int __devinit gpio_keys_probe(struct platform_device *pdev)
{
struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
ddata->input = input;
ddata->n_buttons = pdata->nbuttons;
+ ddata->enable = pdata->enable;
+ ddata->disable = pdata->disable;
mutex_init(&ddata->disable_lock);
platform_set_drvdata(pdev, ddata);
+ input_set_drvdata(input, ddata);
input->name = pdev->name;
input->phys = "gpio-keys/input0";
input->dev.parent = &pdev->dev;
+ input->open = gpio_keys_open;
+ input->close = gpio_keys_close;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
if (absdev) {
val = lo + (hi << 8);
#ifdef TABLET_AUTOADJUST
- if (val < dev->absmin[ABS_X + i])
- dev->absmin[ABS_X + i] = val;
- if (val > dev->absmax[ABS_X + i])
- dev->absmax[ABS_X + i] = val;
+ if (val < input_abs_min(dev, ABS_X + i))
+ input_abs_set_min(dev, ABS_X + i, val);
+ if (val > input_abs_max(dev, ABS_X + i))
+ input_abs_set_max(dev, ABS_X + i, val);
#endif
- if (i%3) val = dev->absmax[ABS_X + i] - val;
+ if (i % 3)
+ val = input_abs_max(dev, ABS_X + i) - val;
input_report_abs(dev, ABS_X + i, val);
} else {
- val = (int) (((int8_t)lo) | ((int8_t)hi << 8));
+ val = (int) (((int8_t) lo) | ((int8_t) hi << 8));
if (i % 3)
val *= -1;
input_report_rel(dev, REL_X + i, val);
#ifdef TABLET_AUTOADJUST
for (i = 0; i < ABS_MAX; i++) {
- int diff = input_dev->absmax[ABS_X + i] / 10;
- input_dev->absmin[ABS_X + i] += diff;
- input_dev->absmax[ABS_X + i] -= diff;
+ int diff = input_abs_max(input_dev, ABS_X + i) / 10;
+ input_abs_set_min(input_dev, ABS_X + i,
+ input_abs_min(input_dev, ABS_X + i) + diff)
+ input_abs_set_max(input_dev, ABS_X + i,
+ input_abs_max(input_dev, ABS_X + i) - diff)
}
#endif
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/stmpe.h>
+
+/* These are at the same addresses in all STMPE variants */
+#define STMPE_KPC_COL 0x60
+#define STMPE_KPC_ROW_MSB 0x61
+#define STMPE_KPC_ROW_LSB 0x62
+#define STMPE_KPC_CTRL_MSB 0x63
+#define STMPE_KPC_CTRL_LSB 0x64
+#define STMPE_KPC_COMBI_KEY_0 0x65
+#define STMPE_KPC_COMBI_KEY_1 0x66
+#define STMPE_KPC_COMBI_KEY_2 0x67
+#define STMPE_KPC_DATA_BYTE0 0x68
+#define STMPE_KPC_DATA_BYTE1 0x69
+#define STMPE_KPC_DATA_BYTE2 0x6a
+#define STMPE_KPC_DATA_BYTE3 0x6b
+#define STMPE_KPC_DATA_BYTE4 0x6c
+
+#define STMPE_KPC_CTRL_LSB_SCAN (0x1 << 0)
+#define STMPE_KPC_CTRL_LSB_DEBOUNCE (0x7f << 1)
+#define STMPE_KPC_CTRL_MSB_SCAN_COUNT (0xf << 4)
+
+#define STMPE_KPC_ROW_MSB_ROWS 0xff
+
+#define STMPE_KPC_DATA_UP (0x1 << 7)
+#define STMPE_KPC_DATA_ROW (0xf << 3)
+#define STMPE_KPC_DATA_COL (0x7 << 0)
+#define STMPE_KPC_DATA_NOKEY_MASK 0x78
+
+#define STMPE_KEYPAD_MAX_DEBOUNCE 127
+#define STMPE_KEYPAD_MAX_SCAN_COUNT 15
+
+#define STMPE_KEYPAD_MAX_ROWS 8
+#define STMPE_KEYPAD_MAX_COLS 8
+#define STMPE_KEYPAD_ROW_SHIFT 3
+#define STMPE_KEYPAD_KEYMAP_SIZE \
+ (STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
+
+/**
+ * struct stmpe_keypad_variant - model-specific attributes
+ * @auto_increment: whether the KPC_DATA_BYTE register address
+ * auto-increments on multiple read
+ * @num_data: number of data bytes
+ * @num_normal_data: number of normal keys' data bytes
+ * @max_cols: maximum number of columns supported
+ * @max_rows: maximum number of rows supported
+ * @col_gpios: bitmask of gpios which can be used for columns
+ * @row_gpios: bitmask of gpios which can be used for rows
+ */
+struct stmpe_keypad_variant {
+ bool auto_increment;
+ int num_data;
+ int num_normal_data;
+ int max_cols;
+ int max_rows;
+ unsigned int col_gpios;
+ unsigned int row_gpios;
+};
+
+static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
+ [STMPE1601] = {
+ .auto_increment = true,
+ .num_data = 5,
+ .num_normal_data = 3,
+ .max_cols = 8,
+ .max_rows = 8,
+ .col_gpios = 0x000ff, /* GPIO 0 - 7 */
+ .row_gpios = 0x0ff00, /* GPIO 8 - 15 */
+ },
+ [STMPE2401] = {
+ .auto_increment = false,
+ .num_data = 3,
+ .num_normal_data = 2,
+ .max_cols = 8,
+ .max_rows = 12,
+ .col_gpios = 0x0000ff, /* GPIO 0 - 7*/
+ .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */
+ },
+ [STMPE2403] = {
+ .auto_increment = true,
+ .num_data = 5,
+ .num_normal_data = 3,
+ .max_cols = 8,
+ .max_rows = 12,
+ .col_gpios = 0x0000ff, /* GPIO 0 - 7*/
+ .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */
+ },
+};
+
+struct stmpe_keypad {
+ struct stmpe *stmpe;
+ struct input_dev *input;
+ const struct stmpe_keypad_variant *variant;
+ const struct stmpe_keypad_platform_data *plat;
+
+ unsigned int rows;
+ unsigned int cols;
+
+ unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
+};
+
+static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
+{
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ struct stmpe *stmpe = keypad->stmpe;
+ int ret;
+ int i;
+
+ if (variant->auto_increment)
+ return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0,
+ variant->num_data, data);
+
+ for (i = 0; i < variant->num_data; i++) {
+ ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i);
+ if (ret < 0)
+ return ret;
+
+ data[i] = ret;
+ }
+
+ return 0;
+}
+
+static irqreturn_t stmpe_keypad_irq(int irq, void *dev)
+{
+ struct stmpe_keypad *keypad = dev;
+ struct input_dev *input = keypad->input;
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ u8 fifo[variant->num_data];
+ int ret;
+ int i;
+
+ ret = stmpe_keypad_read_data(keypad, fifo);
+ if (ret < 0)
+ return IRQ_NONE;
+
+ for (i = 0; i < variant->num_normal_data; i++) {
+ u8 data = fifo[i];
+ int row = (data & STMPE_KPC_DATA_ROW) >> 3;
+ int col = data & STMPE_KPC_DATA_COL;
+ int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT);
+ bool up = data & STMPE_KPC_DATA_UP;
+
+ if ((data & STMPE_KPC_DATA_NOKEY_MASK)
+ == STMPE_KPC_DATA_NOKEY_MASK)
+ continue;
+
+ input_event(input, EV_MSC, MSC_SCAN, code);
+ input_report_key(input, keypad->keymap[code], !up);
+ input_sync(input);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
+{
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ unsigned int col_gpios = variant->col_gpios;
+ unsigned int row_gpios = variant->row_gpios;
+ struct stmpe *stmpe = keypad->stmpe;
+ unsigned int pins = 0;
+ int i;
+
+ /*
+ * Figure out which pins need to be set to the keypad alternate
+ * function.
+ *
+ * {cols,rows}_gpios are bitmasks of which pins on the chip can be used
+ * for the keypad.
+ *
+ * keypad->{cols,rows} are a bitmask of which pins (of the ones useable
+ * for the keypad) are used on the board.
+ */
+
+ for (i = 0; i < variant->max_cols; i++) {
+ int num = __ffs(col_gpios);
+
+ if (keypad->cols & (1 << i))
+ pins |= 1 << num;
+
+ col_gpios &= ~(1 << num);
+ }
+
+ for (i = 0; i < variant->max_rows; i++) {
+ int num = __ffs(row_gpios);
+
+ if (keypad->rows & (1 << i))
+ pins |= 1 << num;
+
+ row_gpios &= ~(1 << num);
+ }
+
+ return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+}
+
+static int __devinit stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
+{
+ const struct stmpe_keypad_platform_data *plat = keypad->plat;
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ struct stmpe *stmpe = keypad->stmpe;
+ int ret;
+
+ if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+ return -EINVAL;
+
+ if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+ return -EINVAL;
+
+ ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
+ if (ret < 0)
+ return ret;
+
+ ret = stmpe_keypad_altfunc_init(keypad);
+ if (ret < 0)
+ return ret;
+
+ ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols);
+ if (ret < 0)
+ return ret;
+
+ ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows);
+ if (ret < 0)
+ return ret;
+
+ if (variant->max_rows > 8) {
+ ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB,
+ STMPE_KPC_ROW_MSB_ROWS,
+ keypad->rows >> 8);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
+ STMPE_KPC_CTRL_MSB_SCAN_COUNT,
+ plat->scan_count << 4);
+ if (ret < 0)
+ return ret;
+
+ return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB,
+ STMPE_KPC_CTRL_LSB_SCAN |
+ STMPE_KPC_CTRL_LSB_DEBOUNCE,
+ STMPE_KPC_CTRL_LSB_SCAN |
+ (plat->debounce_ms << 1));
+}
+
+static int __devinit stmpe_keypad_probe(struct platform_device *pdev)
+{
+ struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+ struct stmpe_keypad_platform_data *plat;
+ struct stmpe_keypad *keypad;
+ struct input_dev *input;
+ int ret;
+ int irq;
+ int i;
+
+ plat = stmpe->pdata->keypad;
+ if (!plat)
+ return -ENODEV;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ keypad = kzalloc(sizeof(struct stmpe_keypad), GFP_KERNEL);
+ if (!keypad)
+ return -ENOMEM;
+
+ input = input_allocate_device();
+ if (!input) {
+ ret = -ENOMEM;
+ goto out_freekeypad;
+ }
+
+ input->name = "STMPE keypad";
+ input->id.bustype = BUS_I2C;
+ input->dev.parent = &pdev->dev;
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+
+ __set_bit(EV_KEY, input->evbit);
+ if (!plat->no_autorepeat)
+ __set_bit(EV_REP, input->evbit);
+
+ input->keycode = keypad->keymap;
+ input->keycodesize = sizeof(keypad->keymap[0]);
+ input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+ matrix_keypad_build_keymap(plat->keymap_data, STMPE_KEYPAD_ROW_SHIFT,
+ input->keycode, input->keybit);
+
+ for (i = 0; i < plat->keymap_data->keymap_size; i++) {
+ unsigned int key = plat->keymap_data->keymap[i];
+
+ keypad->cols |= 1 << KEY_COL(key);
+ keypad->rows |= 1 << KEY_ROW(key);
+ }
+
+ keypad->stmpe = stmpe;
+ keypad->plat = plat;
+ keypad->input = input;
+ keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+ ret = stmpe_keypad_chip_init(keypad);
+ if (ret < 0)
+ goto out_freeinput;
+
+ ret = input_register_device(input);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "unable to register input device: %d\n", ret);
+ goto out_freeinput;
+ }
+
+ ret = request_threaded_irq(irq, NULL, stmpe_keypad_irq, IRQF_ONESHOT,
+ "stmpe-keypad", keypad);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+ goto out_unregisterinput;
+ }
+
+ platform_set_drvdata(pdev, keypad);
+
+ return 0;
+
+out_unregisterinput:
+ input_unregister_device(input);
+ input = NULL;
+out_freeinput:
+ input_free_device(input);
+out_freekeypad:
+ kfree(keypad);
+ return ret;
+}
+
+static int __devexit stmpe_keypad_remove(struct platform_device *pdev)
+{
+ struct stmpe_keypad *keypad = platform_get_drvdata(pdev);
+ struct stmpe *stmpe = keypad->stmpe;
+ int irq = platform_get_irq(pdev, 0);
+
+ stmpe_disable(stmpe, STMPE_BLOCK_KEYPAD);
+
+ free_irq(irq, keypad);
+ input_unregister_device(keypad->input);
+ platform_set_drvdata(pdev, NULL);
+ kfree(keypad);
+
+ return 0;
+}
+
+static struct platform_driver stmpe_keypad_driver = {
+ .driver.name = "stmpe-keypad",
+ .driver.owner = THIS_MODULE,
+ .probe = stmpe_keypad_probe,
+ .remove = __devexit_p(stmpe_keypad_remove),
+};
+
+static int __init stmpe_keypad_init(void)
+{
+ return platform_driver_register(&stmpe_keypad_driver);
+}
+module_init(stmpe_keypad_init);
+
+static void __exit stmpe_keypad_exit(void)
+{
+ platform_driver_unregister(&stmpe_keypad_driver);
+}
+module_exit(stmpe_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPExxxx keypad driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");
pdata = &ac->pdata;
ac->input = input_dev;
- ac->disabled = true;
ac->dev = dev;
ac->irq = irq;
ac->bops = bops;
};
static int ati_remote2_set_mask(const char *val,
- struct kernel_param *kp, unsigned int max)
+ const struct kernel_param *kp,
+ unsigned int max)
{
unsigned long mask;
int ret;
}
static int ati_remote2_set_channel_mask(const char *val,
- struct kernel_param *kp)
+ const struct kernel_param *kp)
{
pr_debug("%s()\n", __func__);
return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK);
}
-static int ati_remote2_get_channel_mask(char *buffer, struct kernel_param *kp)
+static int ati_remote2_get_channel_mask(char *buffer,
+ const struct kernel_param *kp)
{
pr_debug("%s()\n", __func__);
return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg);
}
-static int ati_remote2_set_mode_mask(const char *val, struct kernel_param *kp)
+static int ati_remote2_set_mode_mask(const char *val,
+ const struct kernel_param *kp)
{
pr_debug("%s()\n", __func__);
return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK);
}
-static int ati_remote2_get_mode_mask(char *buffer, struct kernel_param *kp)
+static int ati_remote2_get_mode_mask(char *buffer,
+ const struct kernel_param *kp)
{
pr_debug("%s()\n", __func__);
static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK;
#define param_check_channel_mask(name, p) __param_check(name, p, unsigned int)
-#define param_set_channel_mask ati_remote2_set_channel_mask
-#define param_get_channel_mask ati_remote2_get_channel_mask
+static struct kernel_param_ops param_ops_channel_mask = {
+ .set = ati_remote2_set_channel_mask,
+ .get = ati_remote2_get_channel_mask,
+};
module_param(channel_mask, channel_mask, 0644);
MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK;
#define param_check_mode_mask(name, p) __param_check(name, p, unsigned int)
-#define param_set_mode_mask ati_remote2_set_mode_mask
-#define param_get_mode_mask ati_remote2_get_mode_mask
+static struct kernel_param_ops param_ops_mode_mask = {
+ .set = ati_remote2_set_mode_mask,
+ .get = ati_remote2_get_mode_mask,
+};
module_param(mode_mask, mode_mask, 0644);
MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
return 0;
}
-static int sparcspkr_shutdown(struct of_device *dev)
+static int sparcspkr_shutdown(struct platform_device *dev)
{
struct sparcspkr_state *state = dev_get_drvdata(&dev->dev);
struct input_dev *input_dev = state->input_dev;
return 0;
}
-static int __devinit bbc_beep_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit bbc_beep_probe(struct platform_device *op, const struct of_device_id *match)
{
struct sparcspkr_state *state;
struct bbc_beep_info *info;
return err;
}
-static int __devexit bbc_remove(struct of_device *op)
+static int __devexit bbc_remove(struct platform_device *op)
{
struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
struct input_dev *input_dev = state->input_dev;
.shutdown = sparcspkr_shutdown,
};
-static int __devinit grover_beep_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit grover_beep_probe(struct platform_device *op, const struct of_device_id *match)
{
struct sparcspkr_state *state;
struct grover_beep_info *info;
return err;
}
-static int __devexit grover_remove(struct of_device *op)
+static int __devexit grover_remove(struct platform_device *op)
{
struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
struct grover_beep_info *info = &state->u.grover;
if (!test_bit(cnt, dev->absbit))
continue;
- if ((dev->absmax[cnt] <= dev->absmin[cnt])) {
+ if (input_abs_get_max(dev, cnt) <= input_abs_get_min(dev, cnt)) {
printk(KERN_DEBUG
"%s: invalid abs[%02x] min:%d max:%d\n",
UINPUT_NAME, cnt,
- dev->absmin[cnt], dev->absmax[cnt]);
+ input_abs_get_min(dev, cnt),
+ input_abs_get_max(dev, cnt));
retval = -EINVAL;
break;
}
- if (dev->absflat[cnt] > (dev->absmax[cnt] - dev->absmin[cnt])) {
+ if (input_abs_get_flat(dev, cnt) >
+ input_abs_get_max(dev, cnt) - input_abs_get_min(dev, cnt)) {
printk(KERN_DEBUG
- "%s: absflat[%02x] out of range: %d "
+ "%s: abs_flat #%02x out of range: %d "
"(min:%d/max:%d)\n",
- UINPUT_NAME, cnt, dev->absflat[cnt],
- dev->absmin[cnt], dev->absmax[cnt]);
+ UINPUT_NAME, cnt,
+ input_abs_get_flat(dev, cnt),
+ input_abs_get_min(dev, cnt),
+ input_abs_get_max(dev, cnt));
retval = -EINVAL;
break;
}
struct uinput_user_dev *user_dev;
struct input_dev *dev;
char *name;
- int size;
+ int i, size;
int retval;
if (count != sizeof(struct uinput_user_dev))
dev->id.product = user_dev->id.product;
dev->id.version = user_dev->id.version;
- size = sizeof(int) * ABS_CNT;
- memcpy(dev->absmax, user_dev->absmax, size);
- memcpy(dev->absmin, user_dev->absmin, size);
- memcpy(dev->absfuzz, user_dev->absfuzz, size);
- memcpy(dev->absflat, user_dev->absflat, size);
+ for (i = 0; i < ABS_CNT; i++) {
+ input_abs_set_max(dev, i, user_dev->absmax[i]);
+ input_abs_set_min(dev, i, user_dev->absmin[i]);
+ input_abs_set_fuzz(dev, i, user_dev->absfuzz[i]);
+ input_abs_set_flat(dev, i, user_dev->absflat[i]);
+ }
/* check if absmin/absmax/absfuzz/absflat are filled as
* told in Documentation/input/input-programming.txt */
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
int fingers;
- static int old_fingers;
if (etd->fw_version < 0x020000) {
/*
}
if (etd->jumpy_cursor) {
- /* Discard packets that are likely to have bogus coordinates */
- if (fingers > old_fingers) {
+ if (fingers != 1) {
+ etd->single_finger_reports = 0;
+ } else if (etd->single_finger_reports < 2) {
+ /* Discard first 2 reports of one finger, bogus */
+ etd->single_finger_reports++;
elantech_debug("discarding packet\n");
- goto discard_packet_v1;
+ return;
}
}
}
input_sync(dev);
-
- discard_packet_v1:
- old_fingers = fingers;
}
/*
input_report_key(dev, BTN_TOUCH, fingers != 0);
switch (fingers) {
+ case 3:
+ /*
+ * Same as one finger, except report of more than 3 fingers:
+ * byte 3: n4 . w1 w0 . . . .
+ */
+ if (packet[3] & 0x80)
+ fingers = 4;
+ /* pass through... */
case 1:
/*
* byte 1: . . . . . x10 x9 x8
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+ input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
break;
case 2:
+ __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0);
etd->capabilities = param[0];
/*
- * This firmware seems to suffer from misreporting coordinates when
+ * This firmware suffers from misreporting coordinates when
* a touch action starts causing the mouse cursor or scrolled page
* to jump. Enable a workaround.
*/
- if (etd->fw_version == 0x020022) {
- pr_info("firmware version 2.0.34 detected, enabling jumpy cursor workaround\n");
- etd->jumpy_cursor = 1;
+ if (etd->fw_version == 0x020022 || etd->fw_version == 0x020600) {
+ pr_info("firmware version 2.0.34/2.6.0 detected, enabling jumpy cursor workaround\n");
+ etd->jumpy_cursor = true;
}
if (elantech_set_absolute_mode(psmouse)) {
unsigned char reg_26;
unsigned char debug;
unsigned char capabilities;
- unsigned char paritycheck;
- unsigned char jumpy_cursor;
+ bool paritycheck;
+ bool jumpy_cursor;
unsigned char hw_version;
- unsigned int fw_version;
+ unsigned int fw_version;
+ unsigned int single_finger_reports;
unsigned char parity[256];
};
pc110pad_dev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y);
pc110pad_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
- pc110pad_dev->absmax[ABS_X] = 0x1ff;
- pc110pad_dev->absmax[ABS_Y] = 0x0ff;
+ input_abs_set_max(pc110pad_dev, ABS_X, 0x1ff);
+ input_abs_set_max(pc110pad_dev, ABS_Y, 0x0ff);
pc110pad_dev->open = pc110pad_open;
pc110pad_dev->close = pc110pad_close;
MODULE_LICENSE("GPL");
static unsigned int psmouse_max_proto = PSMOUSE_AUTO;
-static int psmouse_set_maxproto(const char *val, struct kernel_param *kp);
-static int psmouse_get_maxproto(char *buffer, struct kernel_param *kp);
+static int psmouse_set_maxproto(const char *val, const struct kernel_param *);
+static int psmouse_get_maxproto(char *buffer, const struct kernel_param *kp);
+static struct kernel_param_ops param_ops_proto_abbrev = {
+ .set = psmouse_set_maxproto,
+ .get = psmouse_get_maxproto,
+};
#define param_check_proto_abbrev(name, p) __param_check(name, p, unsigned int)
-#define param_set_proto_abbrev psmouse_set_maxproto
-#define param_get_proto_abbrev psmouse_get_maxproto
module_param_named(proto, psmouse_max_proto, proto_abbrev, 0644);
MODULE_PARM_DESC(proto, "Highest protocol extension to probe (bare, imps, exps, any). Useful for KVM switches.");
}
-static int psmouse_set_maxproto(const char *val, struct kernel_param *kp)
+static int psmouse_set_maxproto(const char *val, const struct kernel_param *kp)
{
const struct psmouse_protocol *proto;
return 0;
}
-static int psmouse_get_maxproto(char *buffer, struct kernel_param *kp)
+static int psmouse_get_maxproto(char *buffer, const struct kernel_param *kp)
{
int type = *((unsigned int *)kp->arg);
__clear_bit(REL_X, dev->relbit);
__clear_bit(REL_Y, dev->relbit);
- dev->absres[ABS_X] = priv->x_res;
- dev->absres[ABS_Y] = priv->y_res;
+ input_abs_set_res(dev, ABS_X, priv->x_res);
+ input_abs_set_res(dev, ABS_Y, priv->y_res);
if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
/* Clickpads report only left button */
#include <linux/random.h>
#include <linux/major.h>
#include <linux/device.h>
+#include <linux/kernel.h>
#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
#include <linux/miscdevice.h>
#endif
switch (code) {
case ABS_X:
+
fx(0) = value;
if (mousedev->touch && mousedev->pkt_count >= 2) {
- size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
+ size = input_abs_get_min(dev, ABS_X) -
+ input_abs_get_max(dev, ABS_X);
if (size == 0)
size = 256 * 2;
+
tmp = ((value - fx(2)) * 256 * FRACTION_DENOM) / size;
tmp += mousedev->frac_dx;
mousedev->packet.dx = tmp / FRACTION_DENOM;
case ABS_Y:
fy(0) = value;
if (mousedev->touch && mousedev->pkt_count >= 2) {
- /* use X size to keep the same scale */
- size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
+ /* use X size for ABS_Y to keep the same scale */
+ size = input_abs_get_min(dev, ABS_X) -
+ input_abs_get_max(dev, ABS_X);
if (size == 0)
size = 256 * 2;
+
tmp = -((value - fy(2)) * 256 * FRACTION_DENOM) / size;
tmp += mousedev->frac_dy;
mousedev->packet.dy = tmp / FRACTION_DENOM;
static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev,
unsigned int code, int value)
{
- int size;
+ int min, max, size;
switch (code) {
case ABS_X:
- size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
+ min = input_abs_get_min(dev, ABS_X);
+ max = input_abs_get_max(dev, ABS_X);
+
+ size = max - min;
if (size == 0)
size = xres ? : 1;
- if (value > dev->absmax[ABS_X])
- value = dev->absmax[ABS_X];
- if (value < dev->absmin[ABS_X])
- value = dev->absmin[ABS_X];
- mousedev->packet.x =
- ((value - dev->absmin[ABS_X]) * xres) / size;
+
+ clamp(value, min, max);
+
+ mousedev->packet.x = ((value - min) * xres) / size;
mousedev->packet.abs_event = 1;
break;
case ABS_Y:
- size = dev->absmax[ABS_Y] - dev->absmin[ABS_Y];
+ min = input_abs_get_min(dev, ABS_Y);
+ max = input_abs_get_max(dev, ABS_Y);
+
+ size = max - min;
if (size == 0)
size = yres ? : 1;
- if (value > dev->absmax[ABS_Y])
- value = dev->absmax[ABS_Y];
- if (value < dev->absmin[ABS_Y])
- value = dev->absmin[ABS_Y];
- mousedev->packet.y = yres -
- ((value - dev->absmin[ABS_Y]) * yres) / size;
+
+ clamp(value, min, max);
+
+ mousedev->packet.y = yres - ((value - min) * yres) / size;
mousedev->packet.abs_event = 1;
break;
}
#define OBP_PS2MS_NAME1 "kdmouse"
#define OBP_PS2MS_NAME2 "mouse"
-static int __devinit sparc_i8042_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit sparc_i8042_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
while (dp) {
if (!strcmp(dp->name, OBP_PS2KBD_NAME1) ||
!strcmp(dp->name, OBP_PS2KBD_NAME2)) {
- struct of_device *kbd = of_find_device_by_node(dp);
+ struct platform_device *kbd = of_find_device_by_node(dp);
unsigned int irq = kbd->archdata.irqs[0];
if (irq == 0xffffffff)
irq = op->archdata.irqs[0];
kbd_res = &kbd->resource[0];
} else if (!strcmp(dp->name, OBP_PS2MS_NAME1) ||
!strcmp(dp->name, OBP_PS2MS_NAME2)) {
- struct of_device *ms = of_find_device_by_node(dp);
+ struct platform_device *ms = of_find_device_by_node(dp);
unsigned int irq = ms->archdata.irqs[0];
if (irq == 0xffffffff)
irq = op->archdata.irqs[0];
return 0;
}
-static int __devexit sparc_i8042_remove(struct of_device *op)
+static int __devexit sparc_i8042_remove(struct platform_device *op)
{
of_iounmap(kbd_res, kbd_iobase, 8);
module_param_named(noloop, i8042_noloop, bool, 0);
MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port");
-static unsigned int i8042_blink_frequency = 500;
-module_param_named(panicblink, i8042_blink_frequency, uint, 0600);
-MODULE_PARM_DESC(panicblink, "Frequency with which keyboard LEDs should blink when kernel panics");
-
#ifdef CONFIG_X86
static bool i8042_dritek;
module_param_named(dritek, i8042_dritek, bool, 0);
/*
- * i8042_panic_blink() will flash the keyboard LEDs and is called when
- * kernel panics. Flashing LEDs is useful for users running X who may
+ * i8042_panic_blink() will turn the keyboard LEDs on or off and is called
+ * when kernel panics. Flashing LEDs is useful for users running X who may
* not see the console and will help distingushing panics from "real"
* lockups.
*
#define DELAY do { mdelay(1); if (++delay > 10) return delay; } while(0)
-static long i8042_panic_blink(long count)
+static long i8042_panic_blink(int state)
{
long delay = 0;
- static long last_blink;
- static char led;
-
- /*
- * We expect frequency to be about 1/2s. KDB uses about 1s.
- * Make sure they are different.
- */
- if (!i8042_blink_frequency)
- return 0;
- if (count - last_blink < i8042_blink_frequency)
- return 0;
+ char led;
- led ^= 0x01 | 0x04;
+ led = (state) ? 0x01 | 0x04 : 0;
while (i8042_read_status() & I8042_STR_IBF)
DELAY;
dbg("%02x -> i8042 (panic blink)", 0xed);
dbg("%02x -> i8042 (panic blink)", led);
i8042_write_data(led);
DELAY;
- last_blink = count;
return delay;
}
* It returns 0, if the driver is bound to the PS/2 device, or a negative
* value if there is an error.
*/
-static int __devinit xps2_of_probe(struct of_device *ofdev,
+static int __devinit xps2_of_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct resource r_irq; /* Interrupt resources */
* if the driver module is being unloaded. It frees any resources allocated to
* the device.
*/
-static int __devexit xps2_of_remove(struct of_device *of_dev)
+static int __devexit xps2_of_remove(struct platform_device *of_dev)
{
struct device *dev = &of_dev->dev;
struct xps2data *drvdata = dev_get_drvdata(dev);
/* Query getXextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
return ret;
- aiptek->inputdev->absmin[ABS_X] = 0;
- aiptek->inputdev->absmax[ABS_X] = ret - 1;
+ input_set_abs_params(aiptek->inputdev, ABS_X, 0, ret - 1, 0, 0);
/* Query getYextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
return ret;
- aiptek->inputdev->absmin[ABS_Y] = 0;
- aiptek->inputdev->absmax[ABS_Y] = ret - 1;
+ input_set_abs_params(aiptek->inputdev, ABS_Y, 0, ret - 1, 0, 0);
/* Query getPressureLevels */
if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
return ret;
- aiptek->inputdev->absmin[ABS_PRESSURE] = 0;
- aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1;
+ input_set_abs_params(aiptek->inputdev, ABS_PRESSURE, 0, ret - 1, 0, 0);
/* Depending on whether we are in absolute or relative mode, we will
* do a switchToTablet(absolute) or switchToMouse(relative) command.
struct aiptek *aiptek = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%dx%d\n",
- aiptek->inputdev->absmax[ABS_X] + 1,
- aiptek->inputdev->absmax[ABS_Y] + 1);
+ input_abs_get_max(aiptek->inputdev, ABS_X) + 1,
+ input_abs_get_max(aiptek->inputdev, ABS_Y) + 1);
}
/* These structs define the sysfs files, param #1 is the name of the
for (i = 0; i < ARRAY_SIZE(speeds); ++i) {
aiptek->curSetting.programmableDelay = speeds[i];
(void)aiptek_program_tablet(aiptek);
- if (aiptek->inputdev->absmax[ABS_X] > 0) {
+ if (input_abs_get_max(aiptek->inputdev, ABS_X) > 0) {
dev_info(&intf->dev,
"Aiptek using %d ms programming speed\n",
aiptek->curSetting.programmableDelay);
* protocol.
*/
if (wacom->last_finger != finger) {
- if (x == input->abs[ABS_X])
+ if (x == input_abs_get_val(input, ABS_X))
x++;
- if (y == input->abs[ABS_Y])
+ if (y == input_abs_get_val(input, ABS_Y))
y++;
}
To compile this driver as a module, choose M here: the
module will be called tps6507x_ts.
+config TOUCHSCREEN_STMPE
+ tristate "STMicroelectronics STMPE touchscreens"
+ depends on MFD_STMPE
+ help
+ Say Y here if you want support for STMicroelectronics
+ STMPE touchscreen controllers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stmpe-ts.
+
endif
obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
obj-$(CONFIG_TOUCHSCREEN_QT602240) += qt602240_ts.o
obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
+obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
unsigned char len, unsigned char *value)
{
struct i2c_client *client = tsc->client;
- unsigned int ret;
+ int ret;
unsigned char i2c_data[6];
BUG_ON(len > 5);
ret = i2c_master_send(client, i2c_data, len + 1);
if (ret != 1) {
dev_err(&client->dev, "i2c write data cmd failed\n");
- return ret;
+ return ret ? ret : -EIO;
}
return 0;
unsigned char *data, unsigned char len, unsigned char cmd)
{
struct i2c_client *client = tsc->client;
- unsigned int ret;
+ int ret;
struct i2c_msg msg[2] = {
/* first write slave position to i2c devices */
{ client->addr, 0, 1, &cmd },
--- /dev/null
+/* STMicroelectronics STMPE811 Touchscreen Driver
+ *
+ * (C) 2010 Luotao Fu <l.fu@pengutronix.de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+
+#include <linux/mfd/stmpe.h>
+
+/* Register layouts and functionalities are identical on all stmpexxx variants
+ * with touchscreen controller
+ */
+#define STMPE_REG_INT_STA 0x0B
+#define STMPE_REG_ADC_CTRL1 0x20
+#define STMPE_REG_ADC_CTRL2 0x21
+#define STMPE_REG_TSC_CTRL 0x40
+#define STMPE_REG_TSC_CFG 0x41
+#define STMPE_REG_FIFO_TH 0x4A
+#define STMPE_REG_FIFO_STA 0x4B
+#define STMPE_REG_FIFO_SIZE 0x4C
+#define STMPE_REG_TSC_DATA_XYZ 0x52
+#define STMPE_REG_TSC_FRACTION_Z 0x56
+#define STMPE_REG_TSC_I_DRIVE 0x58
+
+#define OP_MOD_XYZ 0
+
+#define STMPE_TSC_CTRL_TSC_EN (1<<0)
+
+#define STMPE_FIFO_STA_RESET (1<<0)
+
+#define STMPE_IRQ_TOUCH_DET 0
+
+#define SAMPLE_TIME(x) ((x & 0xf) << 4)
+#define MOD_12B(x) ((x & 0x1) << 3)
+#define REF_SEL(x) ((x & 0x1) << 1)
+#define ADC_FREQ(x) (x & 0x3)
+#define AVE_CTRL(x) ((x & 0x3) << 6)
+#define DET_DELAY(x) ((x & 0x7) << 3)
+#define SETTLING(x) (x & 0x7)
+#define FRACTION_Z(x) (x & 0x7)
+#define I_DRIVE(x) (x & 0x1)
+#define OP_MODE(x) ((x & 0x7) << 1)
+
+#define STMPE_TS_NAME "stmpe-ts"
+#define XY_MASK 0xfff
+
+struct stmpe_touch {
+ struct stmpe *stmpe;
+ struct input_dev *idev;
+ struct delayed_work work;
+ struct device *dev;
+ u8 sample_time;
+ u8 mod_12b;
+ u8 ref_sel;
+ u8 adc_freq;
+ u8 ave_ctrl;
+ u8 touch_det_delay;
+ u8 settling;
+ u8 fraction_z;
+ u8 i_drive;
+};
+
+static int __stmpe_reset_fifo(struct stmpe *stmpe)
+{
+ int ret;
+
+ ret = stmpe_set_bits(stmpe, STMPE_REG_FIFO_STA,
+ STMPE_FIFO_STA_RESET, STMPE_FIFO_STA_RESET);
+ if (ret)
+ return ret;
+
+ return stmpe_set_bits(stmpe, STMPE_REG_FIFO_STA,
+ STMPE_FIFO_STA_RESET, 0);
+}
+
+static void stmpe_work(struct work_struct *work)
+{
+ int int_sta;
+ u32 timeout = 40;
+
+ struct stmpe_touch *ts =
+ container_of(work, struct stmpe_touch, work.work);
+
+ int_sta = stmpe_reg_read(ts->stmpe, STMPE_REG_INT_STA);
+
+ /*
+ * touch_det sometimes get desasserted or just get stuck. This appears
+ * to be a silicon bug, We still have to clearify this with the
+ * manufacture. As a workaround We release the key anyway if the
+ * touch_det keeps coming in after 4ms, while the FIFO contains no value
+ * during the whole time.
+ */
+ while ((int_sta & (1 << STMPE_IRQ_TOUCH_DET)) && (timeout > 0)) {
+ timeout--;
+ int_sta = stmpe_reg_read(ts->stmpe, STMPE_REG_INT_STA);
+ udelay(100);
+ }
+
+ /* reset the FIFO before we report release event */
+ __stmpe_reset_fifo(ts->stmpe);
+
+ input_report_abs(ts->idev, ABS_PRESSURE, 0);
+ input_sync(ts->idev);
+}
+
+static irqreturn_t stmpe_ts_handler(int irq, void *data)
+{
+ u8 data_set[4];
+ int x, y, z;
+ struct stmpe_touch *ts = data;
+
+ /*
+ * Cancel scheduled polling for release if we have new value
+ * available. Wait if the polling is already running.
+ */
+ cancel_delayed_work_sync(&ts->work);
+
+ /*
+ * The FIFO sometimes just crashes and stops generating interrupts. This
+ * appears to be a silicon bug. We still have to clearify this with
+ * the manufacture. As a workaround we disable the TSC while we are
+ * collecting data and flush the FIFO after reading
+ */
+ stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL,
+ STMPE_TSC_CTRL_TSC_EN, 0);
+
+ stmpe_block_read(ts->stmpe, STMPE_REG_TSC_DATA_XYZ, 4, data_set);
+
+ x = (data_set[0] << 4) | (data_set[1] >> 4);
+ y = ((data_set[1] & 0xf) << 8) | data_set[2];
+ z = data_set[3];
+
+ input_report_abs(ts->idev, ABS_X, x);
+ input_report_abs(ts->idev, ABS_Y, y);
+ input_report_abs(ts->idev, ABS_PRESSURE, z);
+ input_sync(ts->idev);
+
+ /* flush the FIFO after we have read out our values. */
+ __stmpe_reset_fifo(ts->stmpe);
+
+ /* reenable the tsc */
+ stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL,
+ STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN);
+
+ /* start polling for touch_det to detect release */
+ schedule_delayed_work(&ts->work, HZ / 50);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit stmpe_init_hw(struct stmpe_touch *ts)
+{
+ int ret;
+ u8 adc_ctrl1, adc_ctrl1_mask, tsc_cfg, tsc_cfg_mask;
+ struct stmpe *stmpe = ts->stmpe;
+ struct device *dev = ts->dev;
+
+ ret = stmpe_enable(stmpe, STMPE_BLOCK_TOUCHSCREEN | STMPE_BLOCK_ADC);
+ if (ret) {
+ dev_err(dev, "Could not enable clock for ADC and TS\n");
+ return ret;
+ }
+
+ adc_ctrl1 = SAMPLE_TIME(ts->sample_time) | MOD_12B(ts->mod_12b) |
+ REF_SEL(ts->ref_sel);
+ adc_ctrl1_mask = SAMPLE_TIME(0xff) | MOD_12B(0xff) | REF_SEL(0xff);
+
+ ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1,
+ adc_ctrl1_mask, adc_ctrl1);
+ if (ret) {
+ dev_err(dev, "Could not setup ADC\n");
+ return ret;
+ }
+
+ ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2,
+ ADC_FREQ(0xff), ADC_FREQ(ts->adc_freq));
+ if (ret) {
+ dev_err(dev, "Could not setup ADC\n");
+ return ret;
+ }
+
+ tsc_cfg = AVE_CTRL(ts->ave_ctrl) | DET_DELAY(ts->touch_det_delay) |
+ SETTLING(ts->settling);
+ tsc_cfg_mask = AVE_CTRL(0xff) | DET_DELAY(0xff) | SETTLING(0xff);
+
+ ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CFG, tsc_cfg_mask, tsc_cfg);
+ if (ret) {
+ dev_err(dev, "Could not config touch\n");
+ return ret;
+ }
+
+ ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_FRACTION_Z,
+ FRACTION_Z(0xff), FRACTION_Z(ts->fraction_z));
+ if (ret) {
+ dev_err(dev, "Could not config touch\n");
+ return ret;
+ }
+
+ ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_I_DRIVE,
+ I_DRIVE(0xff), I_DRIVE(ts->i_drive));
+ if (ret) {
+ dev_err(dev, "Could not config touch\n");
+ return ret;
+ }
+
+ /* set FIFO to 1 for single point reading */
+ ret = stmpe_reg_write(stmpe, STMPE_REG_FIFO_TH, 1);
+ if (ret) {
+ dev_err(dev, "Could not set FIFO\n");
+ return ret;
+ }
+
+ ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CTRL,
+ OP_MODE(0xff), OP_MODE(OP_MOD_XYZ));
+ if (ret) {
+ dev_err(dev, "Could not set mode\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int stmpe_ts_open(struct input_dev *dev)
+{
+ struct stmpe_touch *ts = input_get_drvdata(dev);
+ int ret = 0;
+
+ ret = __stmpe_reset_fifo(ts->stmpe);
+ if (ret)
+ return ret;
+
+ return stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL,
+ STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN);
+}
+
+static void stmpe_ts_close(struct input_dev *dev)
+{
+ struct stmpe_touch *ts = input_get_drvdata(dev);
+
+ cancel_delayed_work_sync(&ts->work);
+
+ stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL,
+ STMPE_TSC_CTRL_TSC_EN, 0);
+}
+
+static int __devinit stmpe_input_probe(struct platform_device *pdev)
+{
+ struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+ struct stmpe_platform_data *pdata = stmpe->pdata;
+ struct stmpe_touch *ts;
+ struct input_dev *idev;
+ struct stmpe_ts_platform_data *ts_pdata = NULL;
+ int ret = 0;
+ int ts_irq;
+
+ ts_irq = platform_get_irq_byname(pdev, "FIFO_TH");
+ if (ts_irq < 0)
+ return ts_irq;
+
+ ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ goto err_out;
+
+ idev = input_allocate_device();
+ if (!idev)
+ goto err_free_ts;
+
+ platform_set_drvdata(pdev, ts);
+ ts->stmpe = stmpe;
+ ts->idev = idev;
+ ts->dev = &pdev->dev;
+
+ if (pdata)
+ ts_pdata = pdata->ts;
+
+ if (ts_pdata) {
+ ts->sample_time = ts_pdata->sample_time;
+ ts->mod_12b = ts_pdata->mod_12b;
+ ts->ref_sel = ts_pdata->ref_sel;
+ ts->adc_freq = ts_pdata->adc_freq;
+ ts->ave_ctrl = ts_pdata->ave_ctrl;
+ ts->touch_det_delay = ts_pdata->touch_det_delay;
+ ts->settling = ts_pdata->settling;
+ ts->fraction_z = ts_pdata->fraction_z;
+ ts->i_drive = ts_pdata->i_drive;
+ }
+
+ INIT_DELAYED_WORK(&ts->work, stmpe_work);
+
+ ret = request_threaded_irq(ts_irq, NULL, stmpe_ts_handler,
+ IRQF_ONESHOT, STMPE_TS_NAME, ts);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request IRQ %d\n", ts_irq);
+ goto err_free_input;
+ }
+
+ ret = stmpe_init_hw(ts);
+ if (ret)
+ goto err_free_irq;
+
+ idev->name = STMPE_TS_NAME;
+ idev->id.bustype = BUS_I2C;
+ idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ idev->open = stmpe_ts_open;
+ idev->close = stmpe_ts_close;
+
+ input_set_drvdata(idev, ts);
+
+ input_set_abs_params(idev, ABS_X, 0, XY_MASK, 0, 0);
+ input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0);
+ input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0);
+
+ ret = input_register_device(idev);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not register input device\n");
+ goto err_free_irq;
+ }
+
+ return ret;
+
+err_free_irq:
+ free_irq(ts_irq, ts);
+err_free_input:
+ input_free_device(idev);
+ platform_set_drvdata(pdev, NULL);
+err_free_ts:
+ kfree(ts);
+err_out:
+ return ret;
+}
+
+static int __devexit stmpe_ts_remove(struct platform_device *pdev)
+{
+ struct stmpe_touch *ts = platform_get_drvdata(pdev);
+ unsigned int ts_irq = platform_get_irq_byname(pdev, "FIFO_TH");
+
+ stmpe_disable(ts->stmpe, STMPE_BLOCK_TOUCHSCREEN);
+
+ free_irq(ts_irq, ts);
+
+ platform_set_drvdata(pdev, NULL);
+
+ input_unregister_device(ts->idev);
+ input_free_device(ts->idev);
+
+ kfree(ts);
+
+ return 0;
+}
+
+static struct platform_driver stmpe_ts_driver = {
+ .driver = {
+ .name = STMPE_TS_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = stmpe_input_probe,
+ .remove = __devexit_p(stmpe_ts_remove),
+};
+
+static int __init stmpe_ts_init(void)
+{
+ return platform_driver_register(&stmpe_ts_driver);
+}
+
+module_init(stmpe_ts_init);
+
+static void __exit stmpe_ts_exit(void)
+{
+ platform_driver_unregister(&stmpe_ts_driver);
+}
+
+module_exit(stmpe_ts_exit);
+
+MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
+MODULE_DESCRIPTION("STMPEXXX touchscreen driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" STMPE_TS_NAME);
if (retval != 0) {
printk(KERN_ERR "c4: no AVM-C%d at i/o %#x, irq %d detected, mem %#x\n",
nr, param.port, param.irq, param.membase);
+ pci_disable_device(dev);
return -ENODEV;
}
return 0;
if (retval != 0) {
printk(KERN_ERR "t1pci: no AVM-T1-PCI at i/o %#x, irq %d detected, mem %#x\n",
param.port, param.irq, param.membase);
+ pci_disable_device(dev);
return -ENODEV;
}
return 0;
pr_info("mISDN: do not have informations about adapter at %s\n",
pci_name(pdev));
kfree(card);
+ pci_disable_device(pdev);
return -EINVAL;
} else
pr_notice("mISDN: found adapter %s at %s\n",
pci_set_drvdata(pdev, card);
err = setup_instance(card);
if (err) {
- pci_disable_device(card->pdev);
+ pci_disable_device(pdev);
kfree(card);
pci_set_drvdata(pdev, NULL);
} else if (ent->driver_data == INF_SCT_1) {
sc = kzalloc(sizeof(struct inf_hw), GFP_KERNEL);
if (!sc) {
release_card(card);
+ pci_disable_device(pdev);
return -ENOMEM;
}
sc->irq = card->irq;
sc->ci = card->ci + i;
err = setup_instance(sc);
if (err) {
+ pci_disable_device(pdev);
kfree(sc);
release_card(card);
break;
struct gpio_led_data led_data[];
};
-static int __devinit of_gpio_leds_probe(struct of_device *ofdev,
+static int __devinit of_gpio_leds_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node, *child;
return ret;
}
-static int __devexit of_gpio_leds_remove(struct of_device *ofdev)
+static int __devexit of_gpio_leds_remove(struct platform_device *ofdev)
{
struct gpio_led_of_platform_data *pdata = dev_get_drvdata(&ofdev->dev);
int i;
static ssize_t
compatible_show (struct device *dev, struct device_attribute *attr, char *buf)
{
- struct of_device *of;
+ struct platform_device *of;
const char *compat;
int cplen;
int length = 0;
static ssize_t devspec_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct of_device *ofdev;
+ struct platform_device *ofdev;
- ofdev = to_of_device(dev);
+ ofdev = to_platform_device(dev);
return sprintf(buf, "%s\n", ofdev->dev.of_node->full_name);
}
struct smu_device {
spinlock_t lock;
struct device_node *of_node;
- struct of_device *of_dev;
+ struct platform_device *of_dev;
int doorbell; /* doorbell gpio */
u32 __iomem *db_buf; /* doorbell buffer */
struct device_node *db_node;
static DECLARE_WORK(smu_expose_childs_work, smu_expose_childs);
-static int smu_platform_probe(struct of_device* dev,
+static int smu_platform_probe(struct platform_device* dev,
const struct of_device_id *match)
{
if (!smu)
device_initcall(smu_init_sysfs);
-struct of_device *smu_get_ofdev(void)
+struct platform_device *smu_get_ofdev(void)
{
if (!smu)
return NULL;
static enum {ADT7460, ADT7467} therm_type;
static int therm_bus, therm_address;
-static struct of_device * of_dev;
+static struct platform_device * of_dev;
static struct thermostat* thermostat;
static struct task_struct *thread_therm = NULL;
* Driver statics
*/
-static struct of_device * of_dev;
+static struct platform_device * of_dev;
static struct i2c_adapter * u3_0;
static struct i2c_adapter * u3_1;
static struct i2c_adapter * k2;
}
}
-static int fcu_of_probe(struct of_device* dev, const struct of_device_id *match)
+static int fcu_of_probe(struct platform_device* dev, const struct of_device_id *match)
{
state = state_detached;
return i2c_add_driver(&therm_pm72_driver);
}
-static int fcu_of_remove(struct of_device* dev)
+static int fcu_of_remove(struct platform_device* dev)
{
i2c_del_driver(&therm_pm72_driver);
struct task_struct *poll_task;
struct mutex lock;
- struct of_device *of_dev;
+ struct platform_device *of_dev;
struct i2c_client *thermostat;
struct i2c_client *fan;
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "therm_ds1775", I2C_NAME_SIZE);
- i2c_new_probed_device(adapter, &info, scan_ds1775);
+ i2c_new_probed_device(adapter, &info, scan_ds1775, NULL);
strlcpy(info.type, "therm_adm1030", I2C_NAME_SIZE);
- i2c_new_probed_device(adapter, &info, scan_adm1030);
+ i2c_new_probed_device(adapter, &info, scan_adm1030, NULL);
if( x.thermostat && x.fan ) {
x.running = 1;
/************************************************************************/
static int
-therm_of_probe( struct of_device *dev, const struct of_device_id *match )
+therm_of_probe( struct platform_device *dev, const struct of_device_id *match )
{
return i2c_add_driver( &g4fan_driver );
}
static int
-therm_of_remove( struct of_device *dev )
+therm_of_remove( struct platform_device *dev )
{
i2c_del_driver( &g4fan_driver );
return 0;
config MD_RAID456
tristate "RAID-4/RAID-5/RAID-6 mode"
depends on BLK_DEV_MD
- select MD_RAID6_PQ
+ select RAID6_PQ
select ASYNC_MEMCPY
select ASYNC_XOR
select ASYNC_PQ
If unsure, say N.
-config MD_RAID6_PQ
- tristate
-
-config ASYNC_RAID6_TEST
- tristate "Self test for hardware accelerated raid6 recovery"
- depends on MD_RAID6_PQ
- select ASYNC_RAID6_RECOV
- ---help---
- This is a one-shot self test that permutes through the
- recovery of all the possible two disk failure scenarios for a
- N-disk array. Recovery is performed with the asynchronous
- raid6 recovery routines, and will optionally use an offload
- engine if one is available.
-
- If unsure, say N.
-
config MD_MULTIPATH
tristate "Multipath I/O support"
depends on BLK_DEV_MD
+= dm-log-userspace-base.o dm-log-userspace-transfer.o
md-mod-y += md.o bitmap.o
raid456-y += raid5.o
-raid6_pq-y += raid6algos.o raid6recov.o raid6tables.o \
- raid6int1.o raid6int2.o raid6int4.o \
- raid6int8.o raid6int16.o raid6int32.o \
- raid6altivec1.o raid6altivec2.o raid6altivec4.o \
- raid6altivec8.o \
- raid6mmx.o raid6sse1.o raid6sse2.o
-hostprogs-y += mktables
# Note: link order is important. All raid personalities
# and must come before md.o, as they each initialise
obj-$(CONFIG_MD_RAID0) += raid0.o
obj-$(CONFIG_MD_RAID1) += raid1.o
obj-$(CONFIG_MD_RAID10) += raid10.o
-obj-$(CONFIG_MD_RAID6_PQ) += raid6_pq.o
obj-$(CONFIG_MD_RAID456) += raid456.o
obj-$(CONFIG_MD_MULTIPATH) += multipath.o
obj-$(CONFIG_MD_FAULTY) += faulty.o
obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o
obj-$(CONFIG_DM_ZERO) += dm-zero.o
-quiet_cmd_unroll = UNROLL $@
- cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \
- < $< > $@ || ( rm -f $@ && exit 1 )
-
-ifeq ($(CONFIG_ALTIVEC),y)
-altivec_flags := -maltivec -mabi=altivec
-endif
-
ifeq ($(CONFIG_DM_UEVENT),y)
dm-mod-objs += dm-uevent.o
endif
-
-targets += raid6int1.c
-$(obj)/raid6int1.c: UNROLL := 1
-$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
- $(call if_changed,unroll)
-
-targets += raid6int2.c
-$(obj)/raid6int2.c: UNROLL := 2
-$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
- $(call if_changed,unroll)
-
-targets += raid6int4.c
-$(obj)/raid6int4.c: UNROLL := 4
-$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
- $(call if_changed,unroll)
-
-targets += raid6int8.c
-$(obj)/raid6int8.c: UNROLL := 8
-$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
- $(call if_changed,unroll)
-
-targets += raid6int16.c
-$(obj)/raid6int16.c: UNROLL := 16
-$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
- $(call if_changed,unroll)
-
-targets += raid6int32.c
-$(obj)/raid6int32.c: UNROLL := 32
-$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
- $(call if_changed,unroll)
-
-CFLAGS_raid6altivec1.o += $(altivec_flags)
-targets += raid6altivec1.c
-$(obj)/raid6altivec1.c: UNROLL := 1
-$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
- $(call if_changed,unroll)
-
-CFLAGS_raid6altivec2.o += $(altivec_flags)
-targets += raid6altivec2.c
-$(obj)/raid6altivec2.c: UNROLL := 2
-$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
- $(call if_changed,unroll)
-
-CFLAGS_raid6altivec4.o += $(altivec_flags)
-targets += raid6altivec4.c
-$(obj)/raid6altivec4.c: UNROLL := 4
-$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
- $(call if_changed,unroll)
-
-CFLAGS_raid6altivec8.o += $(altivec_flags)
-targets += raid6altivec8.c
-$(obj)/raid6altivec8.c: UNROLL := 8
-$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
- $(call if_changed,unroll)
-
-quiet_cmd_mktable = TABLE $@
- cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )
-
-targets += raid6tables.c
-$(obj)/raid6tables.c: $(obj)/mktables FORCE
- $(call if_changed,mktable)
* Still to do:
*
* flush after percent set rather than just time based. (maybe both).
- * wait if count gets too high, wake when it drops to half.
*/
#include <linux/blkdev.h>
#include "md.h"
#include "bitmap.h"
+#include <linux/dm-dirty-log.h>
/* debug macros */
#define DEBUG 0
#define INJECT_FATAL_FAULT_3 0 /* undef */
#endif
-//#define DPRINTK PRINTK /* set this NULL to avoid verbose debug output */
-#define DPRINTK(x...) do { } while(0)
-
#ifndef PRINTK
# if DEBUG > 0
# define PRINTK(x...) printk(KERN_DEBUG x)
# endif
#endif
-static inline char * bmname(struct bitmap *bitmap)
+static inline char *bmname(struct bitmap *bitmap)
{
return bitmap->mddev ? mdname(bitmap->mddev) : "mdX";
}
-
/*
* just a placeholder - calls kmalloc for bitmap pages
*/
#ifdef INJECT_FAULTS_1
page = NULL;
#else
- page = kmalloc(PAGE_SIZE, GFP_NOIO);
+ page = kzalloc(PAGE_SIZE, GFP_NOIO);
#endif
if (!page)
printk("%s: bitmap_alloc_page FAILED\n", bmname(bitmap));
* if we find our page, we increment the page's refcount so that it stays
* allocated while we're using it
*/
-static int bitmap_checkpage(struct bitmap *bitmap, unsigned long page, int create)
+static int bitmap_checkpage(struct bitmap *bitmap,
+ unsigned long page, int create)
__releases(bitmap->lock)
__acquires(bitmap->lock)
{
return -EINVAL;
}
-
if (bitmap->bp[page].hijacked) /* it's hijacked, don't try to alloc */
return 0;
if (!create)
return -ENOENT;
- spin_unlock_irq(&bitmap->lock);
-
/* this page has not been allocated yet */
- if ((mappage = bitmap_alloc_page(bitmap)) == NULL) {
+ spin_unlock_irq(&bitmap->lock);
+ mappage = bitmap_alloc_page(bitmap);
+ spin_lock_irq(&bitmap->lock);
+
+ if (mappage == NULL) {
PRINTK("%s: bitmap map page allocation failed, hijacking\n",
bmname(bitmap));
/* failed - set the hijacked flag so that we can use the
* pointer as a counter */
- spin_lock_irq(&bitmap->lock);
if (!bitmap->bp[page].map)
bitmap->bp[page].hijacked = 1;
- goto out;
- }
-
- /* got a page */
-
- spin_lock_irq(&bitmap->lock);
-
- /* recheck the page */
-
- if (bitmap->bp[page].map || bitmap->bp[page].hijacked) {
+ } else if (bitmap->bp[page].map ||
+ bitmap->bp[page].hijacked) {
/* somebody beat us to getting the page */
bitmap_free_page(bitmap, mappage);
return 0;
- }
+ } else {
- /* no page was in place and we have one, so install it */
+ /* no page was in place and we have one, so install it */
- memset(mappage, 0, PAGE_SIZE);
- bitmap->bp[page].map = mappage;
- bitmap->missing_pages--;
-out:
+ bitmap->bp[page].map = mappage;
+ bitmap->missing_pages--;
+ }
return 0;
}
-
/* if page is completely empty, put it back on the free list, or dealloc it */
/* if page was hijacked, unmark the flag so it might get alloced next time */
/* Note: lock should be held when calling this */
if (bitmap->bp[page].hijacked) { /* page was hijacked, undo this now */
bitmap->bp[page].hijacked = 0;
bitmap->bp[page].map = NULL;
- return;
+ } else {
+ /* normal case, free the page */
+ ptr = bitmap->bp[page].map;
+ bitmap->bp[page].map = NULL;
+ bitmap->missing_pages++;
+ bitmap_free_page(bitmap, ptr);
}
-
- /* normal case, free the page */
-
-#if 0
-/* actually ... let's not. We will probably need the page again exactly when
- * memory is tight and we are flusing to disk
- */
- return;
-#else
- ptr = bitmap->bp[page].map;
- bitmap->bp[page].map = NULL;
- bitmap->missing_pages++;
- bitmap_free_page(bitmap, ptr);
- return;
-#endif
}
-
/*
* bitmap file handling - read and write the bitmap file and its superblock
*/
mdk_rdev_t *rdev;
sector_t target;
+ int did_alloc = 0;
- if (!page)
+ if (!page) {
page = alloc_page(GFP_KERNEL);
- if (!page)
- return ERR_PTR(-ENOMEM);
+ if (!page)
+ return ERR_PTR(-ENOMEM);
+ did_alloc = 1;
+ }
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (! test_bit(In_sync, &rdev->flags)
return page;
}
}
+ if (did_alloc)
+ put_page(page);
return ERR_PTR(-EIO);
}
mddev_t *mddev = bitmap->mddev;
while ((rdev = next_active_rdev(rdev, mddev)) != NULL) {
- int size = PAGE_SIZE;
- loff_t offset = mddev->bitmap_info.offset;
- if (page->index == bitmap->file_pages-1)
- size = roundup(bitmap->last_page_size,
- bdev_logical_block_size(rdev->bdev));
- /* Just make sure we aren't corrupting data or
- * metadata
- */
- if (mddev->external) {
- /* Bitmap could be anywhere. */
- if (rdev->sb_start + offset + (page->index *(PAGE_SIZE/512)) >
- rdev->data_offset &&
- rdev->sb_start + offset <
- rdev->data_offset + mddev->dev_sectors +
- (PAGE_SIZE/512))
- goto bad_alignment;
- } else if (offset < 0) {
- /* DATA BITMAP METADATA */
- if (offset
- + (long)(page->index * (PAGE_SIZE/512))
- + size/512 > 0)
- /* bitmap runs in to metadata */
- goto bad_alignment;
- if (rdev->data_offset + mddev->dev_sectors
- > rdev->sb_start + offset)
- /* data runs in to bitmap */
- goto bad_alignment;
- } else if (rdev->sb_start < rdev->data_offset) {
- /* METADATA BITMAP DATA */
- if (rdev->sb_start
- + offset
- + page->index*(PAGE_SIZE/512) + size/512
- > rdev->data_offset)
- /* bitmap runs in to data */
- goto bad_alignment;
- } else {
- /* DATA METADATA BITMAP - no problems */
- }
- md_super_write(mddev, rdev,
- rdev->sb_start + offset
- + page->index * (PAGE_SIZE/512),
- size,
- page);
+ int size = PAGE_SIZE;
+ loff_t offset = mddev->bitmap_info.offset;
+ if (page->index == bitmap->file_pages-1)
+ size = roundup(bitmap->last_page_size,
+ bdev_logical_block_size(rdev->bdev));
+ /* Just make sure we aren't corrupting data or
+ * metadata
+ */
+ if (mddev->external) {
+ /* Bitmap could be anywhere. */
+ if (rdev->sb_start + offset + (page->index
+ * (PAGE_SIZE/512))
+ > rdev->data_offset
+ &&
+ rdev->sb_start + offset
+ < (rdev->data_offset + mddev->dev_sectors
+ + (PAGE_SIZE/512)))
+ goto bad_alignment;
+ } else if (offset < 0) {
+ /* DATA BITMAP METADATA */
+ if (offset
+ + (long)(page->index * (PAGE_SIZE/512))
+ + size/512 > 0)
+ /* bitmap runs in to metadata */
+ goto bad_alignment;
+ if (rdev->data_offset + mddev->dev_sectors
+ > rdev->sb_start + offset)
+ /* data runs in to bitmap */
+ goto bad_alignment;
+ } else if (rdev->sb_start < rdev->data_offset) {
+ /* METADATA BITMAP DATA */
+ if (rdev->sb_start
+ + offset
+ + page->index*(PAGE_SIZE/512) + size/512
+ > rdev->data_offset)
+ /* bitmap runs in to data */
+ goto bad_alignment;
+ } else {
+ /* DATA METADATA BITMAP - no problems */
+ }
+ md_super_write(mddev, rdev,
+ rdev->sb_start + offset
+ + page->index * (PAGE_SIZE/512),
+ size,
+ page);
}
if (wait)
bh = bh->b_this_page;
}
- if (wait) {
+ if (wait)
wait_event(bitmap->write_wait,
atomic_read(&bitmap->pending_writes)==0);
- }
}
if (bitmap->flags & BITMAP_WRITE_ERROR)
bitmap_file_kick(bitmap);
struct buffer_head *bh;
sector_t block;
- PRINTK("read bitmap file (%dB @ %Lu)\n", (int)PAGE_SIZE,
+ PRINTK("read bitmap file (%dB @ %llu)\n", (int)PAGE_SIZE,
(unsigned long long)index << PAGE_SHIFT);
page = alloc_page(GFP_KERNEL);
}
out:
if (IS_ERR(page))
- printk(KERN_ALERT "md: bitmap read error: (%dB @ %Lu): %ld\n",
+ printk(KERN_ALERT "md: bitmap read error: (%dB @ %llu): %ld\n",
(int)PAGE_SIZE,
(unsigned long long)index << PAGE_SHIFT,
PTR_ERR(page));
sb = kmap_atomic(bitmap->sb_page, KM_USER0);
old = le32_to_cpu(sb->state) & bits;
switch (op) {
- case MASK_SET: sb->state |= cpu_to_le32(bits);
- break;
- case MASK_UNSET: sb->state &= cpu_to_le32(~bits);
- break;
- default: BUG();
+ case MASK_SET:
+ sb->state |= cpu_to_le32(bits);
+ break;
+ case MASK_UNSET:
+ sb->state &= cpu_to_le32(~bits);
+ break;
+ default:
+ BUG();
}
kunmap_atomic(sb, KM_USER0);
return old;
static inline struct page *filemap_get_page(struct bitmap *bitmap,
unsigned long chunk)
{
- if (file_page_index(bitmap, chunk) >= bitmap->file_pages) return NULL;
+ if (bitmap->filemap == NULL)
+ return NULL;
+ if (file_page_index(bitmap, chunk) >= bitmap->file_pages)
+ return NULL;
return bitmap->filemap[file_page_index(bitmap, chunk)
- file_page_index(bitmap, 0)];
}
-
static void bitmap_file_unmap(struct bitmap *bitmap)
{
struct page **map, *sb_page;
}
}
-
/*
* bitmap_file_kick - if an error occurs while manipulating the bitmap file
* then it is no longer reliable, so we stop using it and we mark the file
ptr = d_path(&bitmap->file->f_path, path,
PAGE_SIZE);
-
printk(KERN_ALERT
"%s: kicking failed bitmap file %s from array!\n",
bmname(bitmap), IS_ERR(ptr) ? "" : ptr);
}
enum bitmap_page_attr {
- BITMAP_PAGE_DIRTY = 0, // there are set bits that need to be synced
- BITMAP_PAGE_CLEAN = 1, // there are bits that might need to be cleared
- BITMAP_PAGE_NEEDWRITE=2, // there are cleared bits that need to be synced
+ BITMAP_PAGE_DIRTY = 0, /* there are set bits that need to be synced */
+ BITMAP_PAGE_CLEAN = 1, /* there are bits that might need to be cleared */
+ BITMAP_PAGE_NEEDWRITE = 2, /* there are cleared bits that need to be synced */
};
static inline void set_page_attr(struct bitmap *bitmap, struct page *page,
enum bitmap_page_attr attr)
{
- __set_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ if (page)
+ __set_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ else
+ __set_bit(attr, &bitmap->logattrs);
}
static inline void clear_page_attr(struct bitmap *bitmap, struct page *page,
enum bitmap_page_attr attr)
{
- __clear_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ if (page)
+ __clear_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ else
+ __clear_bit(attr, &bitmap->logattrs);
}
static inline unsigned long test_page_attr(struct bitmap *bitmap, struct page *page,
enum bitmap_page_attr attr)
{
- return test_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ if (page)
+ return test_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ else
+ return test_bit(attr, &bitmap->logattrs);
}
/*
static void bitmap_file_set_bit(struct bitmap *bitmap, sector_t block)
{
unsigned long bit;
- struct page *page;
+ struct page *page = NULL;
void *kaddr;
unsigned long chunk = block >> CHUNK_BLOCK_SHIFT(bitmap);
if (!bitmap->filemap) {
- return;
- }
-
- page = filemap_get_page(bitmap, chunk);
- if (!page) return;
- bit = file_page_offset(bitmap, chunk);
+ struct dm_dirty_log *log = bitmap->mddev->bitmap_info.log;
+ if (log)
+ log->type->mark_region(log, chunk);
+ } else {
- /* set the bit */
- kaddr = kmap_atomic(page, KM_USER0);
- if (bitmap->flags & BITMAP_HOSTENDIAN)
- set_bit(bit, kaddr);
- else
- ext2_set_bit(bit, kaddr);
- kunmap_atomic(kaddr, KM_USER0);
- PRINTK("set file bit %lu page %lu\n", bit, page->index);
+ page = filemap_get_page(bitmap, chunk);
+ if (!page)
+ return;
+ bit = file_page_offset(bitmap, chunk);
+ /* set the bit */
+ kaddr = kmap_atomic(page, KM_USER0);
+ if (bitmap->flags & BITMAP_HOSTENDIAN)
+ set_bit(bit, kaddr);
+ else
+ ext2_set_bit(bit, kaddr);
+ kunmap_atomic(kaddr, KM_USER0);
+ PRINTK("set file bit %lu page %lu\n", bit, page->index);
+ }
/* record page number so it gets flushed to disk when unplug occurs */
set_page_attr(bitmap, page, BITMAP_PAGE_DIRTY);
-
}
/* this gets called when the md device is ready to unplug its underlying
if (!bitmap)
return;
+ if (!bitmap->filemap) {
+ /* Must be using a dirty_log */
+ struct dm_dirty_log *log = bitmap->mddev->bitmap_info.log;
+ dirty = test_and_clear_bit(BITMAP_PAGE_DIRTY, &bitmap->logattrs);
+ need_write = test_and_clear_bit(BITMAP_PAGE_NEEDWRITE, &bitmap->logattrs);
+ if (dirty || need_write)
+ if (log->type->flush(log))
+ bitmap->flags |= BITMAP_WRITE_ERROR;
+ goto out;
+ }
/* look at each page to see if there are any set bits that need to be
* flushed out to disk */
wait = 1;
spin_unlock_irqrestore(&bitmap->lock, flags);
- if (dirty | need_write)
+ if (dirty || need_write)
write_page(bitmap, page, 0);
}
if (wait) { /* if any writes were performed, we need to wait on them */
else
md_super_wait(bitmap->mddev);
}
+out:
if (bitmap->flags & BITMAP_WRITE_ERROR)
bitmap_file_kick(bitmap);
}
+EXPORT_SYMBOL(bitmap_unplug);
static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int needed);
/* * bitmap_init_from_disk -- called at bitmap_create time to initialize
printk(KERN_INFO "%s: bitmap file is out of date, doing full "
"recovery\n", bmname(bitmap));
- bytes = (chunks + 7) / 8;
+ bytes = DIV_ROUND_UP(bitmap->chunks, 8);
if (!bitmap->mddev->bitmap_info.external)
bytes += sizeof(bitmap_super_t);
-
- num_pages = (bytes + PAGE_SIZE - 1) / PAGE_SIZE;
+ num_pages = DIV_ROUND_UP(bytes, PAGE_SIZE);
if (file && i_size_read(file->f_mapping->host) < bytes) {
printk(KERN_INFO "%s: bitmap file too short %lu < %lu\n",
/* We need 4 bits per page, rounded up to a multiple of sizeof(unsigned long) */
bitmap->filemap_attr = kzalloc(
- roundup( DIV_ROUND_UP(num_pages*4, 8), sizeof(unsigned long)),
+ roundup(DIV_ROUND_UP(num_pages*4, 8), sizeof(unsigned long)),
GFP_KERNEL);
if (!bitmap->filemap_attr)
goto err;
if (outofdate) {
/*
* if bitmap is out of date, dirty the
- * whole page and write it out
+ * whole page and write it out
*/
paddr = kmap_atomic(page, KM_USER0);
memset(paddr + offset, 0xff,
}
}
- /* everything went OK */
+ /* everything went OK */
ret = 0;
bitmap_mask_state(bitmap, BITMAP_STALE, MASK_UNSET);
*/
int i;
- for (i=0; i < bitmap->file_pages; i++)
+ for (i = 0; i < bitmap->file_pages; i++)
set_page_attr(bitmap, bitmap->filemap[i],
BITMAP_PAGE_NEEDWRITE);
}
-
static void bitmap_count_page(struct bitmap *bitmap, sector_t offset, int inc)
{
sector_t chunk = offset >> CHUNK_BLOCK_SHIFT(bitmap);
unsigned long page = chunk >> PAGE_COUNTER_SHIFT;
bitmap->bp[page].count += inc;
-/*
- if (page == 0) printk("count page 0, offset %llu: %d gives %d\n",
- (unsigned long long)offset, inc, bitmap->bp[page].count);
-*/
bitmap_checkfree(bitmap, page);
}
static bitmap_counter_t *bitmap_get_counter(struct bitmap *bitmap,
struct page *page = NULL, *lastpage = NULL;
int blocks;
void *paddr;
+ struct dm_dirty_log *log = mddev->bitmap_info.log;
/* Use a mutex to guard daemon_work against
* bitmap_destroy.
spin_lock_irqsave(&bitmap->lock, flags);
for (j = 0; j < bitmap->chunks; j++) {
bitmap_counter_t *bmc;
- if (!bitmap->filemap)
- /* error or shutdown */
- break;
-
- page = filemap_get_page(bitmap, j);
+ if (!bitmap->filemap) {
+ if (!log)
+ /* error or shutdown */
+ break;
+ } else
+ page = filemap_get_page(bitmap, j);
if (page != lastpage) {
/* skip this page unless it's marked as needing cleaning */
(sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
&blocks, 0);
if (bmc) {
-/*
- if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc);
-*/
if (*bmc)
bitmap->allclean = 0;
if (*bmc == 2) {
- *bmc=1; /* maybe clear the bit next time */
+ *bmc = 1; /* maybe clear the bit next time */
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
} else if (*bmc == 1 && !bitmap->need_sync) {
/* we can clear the bit */
-1);
/* clear the bit */
- paddr = kmap_atomic(page, KM_USER0);
- if (bitmap->flags & BITMAP_HOSTENDIAN)
- clear_bit(file_page_offset(bitmap, j),
- paddr);
- else
- ext2_clear_bit(file_page_offset(bitmap, j),
- paddr);
- kunmap_atomic(paddr, KM_USER0);
+ if (page) {
+ paddr = kmap_atomic(page, KM_USER0);
+ if (bitmap->flags & BITMAP_HOSTENDIAN)
+ clear_bit(file_page_offset(bitmap, j),
+ paddr);
+ else
+ ext2_clear_bit(file_page_offset(bitmap, j),
+ paddr);
+ kunmap_atomic(paddr, KM_USER0);
+ } else
+ log->type->clear_region(log, j);
}
} else
j |= PAGE_COUNTER_MASK;
spin_unlock_irqrestore(&bitmap->lock, flags);
/* now sync the final page */
- if (lastpage != NULL) {
+ if (lastpage != NULL || log != NULL) {
spin_lock_irqsave(&bitmap->lock, flags);
if (test_page_attr(bitmap, lastpage, BITMAP_PAGE_NEEDWRITE)) {
clear_page_attr(bitmap, lastpage, BITMAP_PAGE_NEEDWRITE);
spin_unlock_irqrestore(&bitmap->lock, flags);
- write_page(bitmap, lastpage, 0);
+ if (lastpage)
+ write_page(bitmap, lastpage, 0);
+ else
+ if (log->type->flush(log))
+ bitmap->flags |= BITMAP_WRITE_ERROR;
} else {
set_page_attr(bitmap, lastpage, BITMAP_PAGE_NEEDWRITE);
spin_unlock_irqrestore(&bitmap->lock, flags);
done:
if (bitmap->allclean == 0)
- bitmap->mddev->thread->timeout =
+ bitmap->mddev->thread->timeout =
bitmap->mddev->bitmap_info.daemon_sleep;
mutex_unlock(&mddev->bitmap_info.mutex);
}
unsigned long page = chunk >> PAGE_COUNTER_SHIFT;
unsigned long pageoff = (chunk & PAGE_COUNTER_MASK) << COUNTER_BYTE_SHIFT;
sector_t csize;
+ int err;
- if (bitmap_checkpage(bitmap, page, create) < 0) {
+ err = bitmap_checkpage(bitmap, page, create);
+
+ if (bitmap->bp[page].hijacked ||
+ bitmap->bp[page].map == NULL)
+ csize = ((sector_t)1) << (CHUNK_BLOCK_SHIFT(bitmap) +
+ PAGE_COUNTER_SHIFT - 1);
+ else
csize = ((sector_t)1) << (CHUNK_BLOCK_SHIFT(bitmap));
- *blocks = csize - (offset & (csize- 1));
+ *blocks = csize - (offset & (csize - 1));
+
+ if (err < 0)
return NULL;
- }
+
/* now locked ... */
if (bitmap->bp[page].hijacked) { /* hijacked pointer */
/* should we use the first or second counter field
* of the hijacked pointer? */
int hi = (pageoff > PAGE_COUNTER_MASK);
- csize = ((sector_t)1) << (CHUNK_BLOCK_SHIFT(bitmap) +
- PAGE_COUNTER_SHIFT - 1);
- *blocks = csize - (offset & (csize- 1));
return &((bitmap_counter_t *)
&bitmap->bp[page].map)[hi];
- } else { /* page is allocated */
- csize = ((sector_t)1) << (CHUNK_BLOCK_SHIFT(bitmap));
- *blocks = csize - (offset & (csize- 1));
+ } else /* page is allocated */
return (bitmap_counter_t *)
&(bitmap->bp[page].map[pageoff]);
- }
}
int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sectors, int behind)
{
- if (!bitmap) return 0;
+ if (!bitmap)
+ return 0;
if (behind) {
int bw;
prepare_to_wait(&bitmap->overflow_wait, &__wait,
TASK_UNINTERRUPTIBLE);
spin_unlock_irq(&bitmap->lock);
- blk_unplug(bitmap->mddev->queue);
+ md_unplug(bitmap->mddev);
schedule();
finish_wait(&bitmap->overflow_wait, &__wait);
continue;
}
- switch(*bmc) {
+ switch (*bmc) {
case 0:
bitmap_file_set_bit(bitmap, offset);
- bitmap_count_page(bitmap,offset, 1);
- blk_plug_device_unlocked(bitmap->mddev->queue);
+ bitmap_count_page(bitmap, offset, 1);
/* fall through */
case 1:
*bmc = 2;
offset += blocks;
if (sectors > blocks)
sectors -= blocks;
- else sectors = 0;
+ else
+ sectors = 0;
}
bitmap->allclean = 0;
return 0;
}
+EXPORT_SYMBOL(bitmap_startwrite);
void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long sectors,
int success, int behind)
{
- if (!bitmap) return;
+ if (!bitmap)
+ return;
if (behind) {
if (atomic_dec_and_test(&bitmap->behind_writes))
wake_up(&bitmap->behind_wait);
bitmap->events_cleared < bitmap->mddev->events) {
bitmap->events_cleared = bitmap->mddev->events;
bitmap->need_sync = 1;
- sysfs_notify_dirent(bitmap->sysfs_can_clear);
+ sysfs_notify_dirent_safe(bitmap->sysfs_can_clear);
}
if (!success && ! (*bmc & NEEDED_MASK))
wake_up(&bitmap->overflow_wait);
(*bmc)--;
- if (*bmc <= 2) {
+ if (*bmc <= 2)
set_page_attr(bitmap,
- filemap_get_page(bitmap, offset >> CHUNK_BLOCK_SHIFT(bitmap)),
+ filemap_get_page(
+ bitmap,
+ offset >> CHUNK_BLOCK_SHIFT(bitmap)),
BITMAP_PAGE_CLEAN);
- }
+
spin_unlock_irqrestore(&bitmap->lock, flags);
offset += blocks;
if (sectors > blocks)
sectors -= blocks;
- else sectors = 0;
+ else
+ sectors = 0;
}
}
+EXPORT_SYMBOL(bitmap_endwrite);
static int __bitmap_start_sync(struct bitmap *bitmap, sector_t offset, int *blocks,
int degraded)
}
return rv;
}
+EXPORT_SYMBOL(bitmap_start_sync);
void bitmap_end_sync(struct bitmap *bitmap, sector_t offset, int *blocks, int aborted)
{
bitmap_counter_t *bmc;
unsigned long flags;
-/*
- if (offset == 0) printk("bitmap_end_sync 0 (%d)\n", aborted);
-*/ if (bitmap == NULL) {
+
+ if (bitmap == NULL) {
*blocks = 1024;
return;
}
if (bmc == NULL)
goto unlock;
/* locked */
-/*
- if (offset == 0) printk("bitmap_end sync found 0x%x, blocks %d\n", *bmc, *blocks);
-*/
if (RESYNC(*bmc)) {
*bmc &= ~RESYNC_MASK;
if (!NEEDED(*bmc) && aborted)
*bmc |= NEEDED_MASK;
else {
- if (*bmc <= 2) {
+ if (*bmc <= 2)
set_page_attr(bitmap,
filemap_get_page(bitmap, offset >> CHUNK_BLOCK_SHIFT(bitmap)),
BITMAP_PAGE_CLEAN);
- }
}
}
unlock:
spin_unlock_irqrestore(&bitmap->lock, flags);
bitmap->allclean = 0;
}
+EXPORT_SYMBOL(bitmap_end_sync);
void bitmap_close_sync(struct bitmap *bitmap)
{
sector += blocks;
}
}
+EXPORT_SYMBOL(bitmap_close_sync);
void bitmap_cond_end_sync(struct bitmap *bitmap, sector_t sector)
{
atomic_read(&bitmap->mddev->recovery_active) == 0);
bitmap->mddev->curr_resync_completed = bitmap->mddev->curr_resync;
- set_bit(MD_CHANGE_CLEAN, &bitmap->mddev->flags);
+ if (bitmap->mddev->persistent)
+ set_bit(MD_CHANGE_CLEAN, &bitmap->mddev->flags);
sector &= ~((1ULL << CHUNK_BLOCK_SHIFT(bitmap)) - 1);
s = 0;
while (s < sector && s < bitmap->mddev->resync_max_sectors) {
bitmap->last_end_sync = jiffies;
sysfs_notify(&bitmap->mddev->kobj, NULL, "sync_completed");
}
+EXPORT_SYMBOL(bitmap_cond_end_sync);
static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int needed)
{
spin_unlock_irq(&bitmap->lock);
return;
}
- if (! *bmc) {
+ if (!*bmc) {
struct page *page;
- *bmc = 1 | (needed?NEEDED_MASK:0);
+ *bmc = 1 | (needed ? NEEDED_MASK : 0);
bitmap_count_page(bitmap, offset, 1);
page = filemap_get_page(bitmap, offset >> CHUNK_BLOCK_SHIFT(bitmap));
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
unsigned long pages;
struct file *file = mddev->bitmap_info.file;
int err;
- sector_t start;
- struct sysfs_dirent *bm;
+ struct sysfs_dirent *bm = NULL;
BUILD_BUG_ON(sizeof(bitmap_super_t) != 256);
- if (!file && !mddev->bitmap_info.offset) /* bitmap disabled, nothing to do */
+ if (!file
+ && !mddev->bitmap_info.offset
+ && !mddev->bitmap_info.log) /* bitmap disabled, nothing to do */
return 0;
BUG_ON(file && mddev->bitmap_info.offset);
+ BUG_ON(mddev->bitmap_info.offset && mddev->bitmap_info.log);
bitmap = kzalloc(sizeof(*bitmap), GFP_KERNEL);
if (!bitmap)
bitmap->mddev = mddev;
- bm = sysfs_get_dirent(mddev->kobj.sd, NULL, "bitmap");
+ if (mddev->kobj.sd)
+ bm = sysfs_get_dirent(mddev->kobj.sd, NULL, "bitmap");
if (bm) {
bitmap->sysfs_can_clear = sysfs_get_dirent(bm, NULL, "can_clear");
sysfs_put(bm);
bitmap->chunkshift = ffz(~mddev->bitmap_info.chunksize);
/* now that chunksize and chunkshift are set, we can use these macros */
- chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) >>
+ chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) >>
CHUNK_BLOCK_SHIFT(bitmap);
- pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO;
+ pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO;
BUG_ON(!pages);
if (!bitmap->bp)
goto error;
- /* now that we have some pages available, initialize the in-memory
- * bitmap from the on-disk bitmap */
- start = 0;
- if (mddev->degraded == 0
- || bitmap->events_cleared == mddev->events)
- /* no need to keep dirty bits to optimise a re-add of a missing device */
- start = mddev->recovery_cp;
- err = bitmap_init_from_disk(bitmap, start);
-
- if (err)
- goto error;
-
printk(KERN_INFO "created bitmap (%lu pages) for device %s\n",
pages, bmname(bitmap));
mddev->bitmap = bitmap;
- mddev->thread->timeout = mddev->bitmap_info.daemon_sleep;
- md_wakeup_thread(mddev->thread);
-
- bitmap_update_sb(bitmap);
return (bitmap->flags & BITMAP_WRITE_ERROR) ? -EIO : 0;
return err;
}
+int bitmap_load(mddev_t *mddev)
+{
+ int err = 0;
+ sector_t sector = 0;
+ struct bitmap *bitmap = mddev->bitmap;
+
+ if (!bitmap)
+ goto out;
+
+ /* Clear out old bitmap info first: Either there is none, or we
+ * are resuming after someone else has possibly changed things,
+ * so we should forget old cached info.
+ * All chunks should be clean, but some might need_sync.
+ */
+ while (sector < mddev->resync_max_sectors) {
+ int blocks;
+ bitmap_start_sync(bitmap, sector, &blocks, 0);
+ sector += blocks;
+ }
+ bitmap_close_sync(bitmap);
+
+ if (mddev->bitmap_info.log) {
+ unsigned long i;
+ struct dm_dirty_log *log = mddev->bitmap_info.log;
+ for (i = 0; i < bitmap->chunks; i++)
+ if (!log->type->in_sync(log, i, 1))
+ bitmap_set_memory_bits(bitmap,
+ (sector_t)i << CHUNK_BLOCK_SHIFT(bitmap),
+ 1);
+ } else {
+ sector_t start = 0;
+ if (mddev->degraded == 0
+ || bitmap->events_cleared == mddev->events)
+ /* no need to keep dirty bits to optimise a
+ * re-add of a missing device */
+ start = mddev->recovery_cp;
+
+ err = bitmap_init_from_disk(bitmap, start);
+ }
+ if (err)
+ goto out;
+
+ mddev->thread->timeout = mddev->bitmap_info.daemon_sleep;
+ md_wakeup_thread(mddev->thread);
+
+ bitmap_update_sb(bitmap);
+
+ if (bitmap->flags & BITMAP_WRITE_ERROR)
+ err = -EIO;
+out:
+ return err;
+}
+EXPORT_SYMBOL_GPL(bitmap_load);
+
static ssize_t
location_show(mddev_t *mddev, char *page)
{
ssize_t len;
- if (mddev->bitmap_info.file) {
+ if (mddev->bitmap_info.file)
len = sprintf(page, "file");
- } else if (mddev->bitmap_info.offset) {
+ else if (mddev->bitmap_info.offset)
len = sprintf(page, "%+lld", (long long)mddev->bitmap_info.offset);
- } else
+ else
len = sprintf(page, "none");
len += sprintf(page+len, "\n");
return len;
ssize_t len;
unsigned long secs = mddev->bitmap_info.daemon_sleep / HZ;
unsigned long jifs = mddev->bitmap_info.daemon_sleep % HZ;
-
+
len = sprintf(page, "%lu", secs);
if (jifs)
len += sprintf(page+len, ".%03u", jiffies_to_msecs(jifs));
.attrs = md_bitmap_attrs,
};
-
-/* the bitmap API -- for raid personalities */
-EXPORT_SYMBOL(bitmap_startwrite);
-EXPORT_SYMBOL(bitmap_endwrite);
-EXPORT_SYMBOL(bitmap_start_sync);
-EXPORT_SYMBOL(bitmap_end_sync);
-EXPORT_SYMBOL(bitmap_unplug);
-EXPORT_SYMBOL(bitmap_close_sync);
-EXPORT_SYMBOL(bitmap_cond_end_sync);
unsigned long file_pages; /* number of pages in the file */
int last_page_size; /* bytes in the last page */
+ unsigned long logattrs; /* used when filemap_attr doesn't exist
+ * because we are working with a dirty_log
+ */
+
unsigned long flags;
int allclean;
wait_queue_head_t behind_wait;
struct sysfs_dirent *sysfs_can_clear;
+
};
/* the bitmap API */
/* these are used only by md/bitmap */
int bitmap_create(mddev_t *mddev);
+int bitmap_load(mddev_t *mddev);
void bitmap_flush(mddev_t *mddev);
void bitmap_destroy(mddev_t *mddev);
struct workqueue_struct *io_queue;
struct workqueue_struct *crypt_queue;
- /*
- * crypto related data
- */
+ char *cipher;
+ char *cipher_mode;
+
struct crypt_iv_operations *iv_gen_ops;
- char *iv_mode;
union {
struct iv_essiv_private essiv;
struct iv_benbi_private benbi;
unsigned int dmreq_start;
struct ablkcipher_request *req;
- char cipher[CRYPTO_MAX_ALG_NAME];
- char chainmode[CRYPTO_MAX_ALG_NAME];
struct crypto_ablkcipher *tfm;
unsigned long flags;
unsigned int key_size;
return crypto_ablkcipher_setkey(cc->tfm, cc->key, cc->key_size);
}
-/*
- * Construct an encryption mapping:
- * <cipher> <key> <iv_offset> <dev_path> <start>
- */
-static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
+static void crypt_dtr(struct dm_target *ti)
{
- struct crypt_config *cc;
- struct crypto_ablkcipher *tfm;
- char *tmp;
- char *cipher;
- char *chainmode;
- char *ivmode;
- char *ivopts;
- unsigned int key_size;
- unsigned long long tmpll;
+ struct crypt_config *cc = ti->private;
- if (argc != 5) {
- ti->error = "Not enough arguments";
+ ti->private = NULL;
+
+ if (!cc)
+ return;
+
+ if (cc->io_queue)
+ destroy_workqueue(cc->io_queue);
+ if (cc->crypt_queue)
+ destroy_workqueue(cc->crypt_queue);
+
+ if (cc->bs)
+ bioset_free(cc->bs);
+
+ if (cc->page_pool)
+ mempool_destroy(cc->page_pool);
+ if (cc->req_pool)
+ mempool_destroy(cc->req_pool);
+ if (cc->io_pool)
+ mempool_destroy(cc->io_pool);
+
+ if (cc->iv_gen_ops && cc->iv_gen_ops->dtr)
+ cc->iv_gen_ops->dtr(cc);
+
+ if (cc->tfm && !IS_ERR(cc->tfm))
+ crypto_free_ablkcipher(cc->tfm);
+
+ if (cc->dev)
+ dm_put_device(ti, cc->dev);
+
+ kzfree(cc->cipher);
+ kzfree(cc->cipher_mode);
+
+ /* Must zero key material before freeing */
+ kzfree(cc);
+}
+
+static int crypt_ctr_cipher(struct dm_target *ti,
+ char *cipher_in, char *key)
+{
+ struct crypt_config *cc = ti->private;
+ char *tmp, *cipher, *chainmode, *ivmode, *ivopts;
+ char *cipher_api = NULL;
+ int ret = -EINVAL;
+
+ /* Convert to crypto api definition? */
+ if (strchr(cipher_in, '(')) {
+ ti->error = "Bad cipher specification";
return -EINVAL;
}
- tmp = argv[0];
+ /*
+ * Legacy dm-crypt cipher specification
+ * cipher-mode-iv:ivopts
+ */
+ tmp = cipher_in;
cipher = strsep(&tmp, "-");
+
+ cc->cipher = kstrdup(cipher, GFP_KERNEL);
+ if (!cc->cipher)
+ goto bad_mem;
+
+ if (tmp) {
+ cc->cipher_mode = kstrdup(tmp, GFP_KERNEL);
+ if (!cc->cipher_mode)
+ goto bad_mem;
+ }
+
chainmode = strsep(&tmp, "-");
ivopts = strsep(&tmp, "-");
ivmode = strsep(&ivopts, ":");
if (tmp)
- DMWARN("Unexpected additional cipher options");
-
- key_size = strlen(argv[1]) >> 1;
-
- cc = kzalloc(sizeof(*cc) + key_size * sizeof(u8), GFP_KERNEL);
- if (cc == NULL) {
- ti->error =
- "Cannot allocate transparent encryption context";
- return -ENOMEM;
- }
+ DMWARN("Ignoring unexpected additional cipher options");
- /* Compatibility mode for old dm-crypt cipher strings */
- if (!chainmode || (strcmp(chainmode, "plain") == 0 && !ivmode)) {
+ /* Compatibility mode for old dm-crypt mappings */
+ if (!chainmode || (!strcmp(chainmode, "plain") && !ivmode)) {
+ kfree(cc->cipher_mode);
+ cc->cipher_mode = kstrdup("cbc-plain", GFP_KERNEL);
chainmode = "cbc";
ivmode = "plain";
}
if (strcmp(chainmode, "ecb") && !ivmode) {
- ti->error = "This chaining mode requires an IV mechanism";
- goto bad_cipher;
+ ti->error = "IV mechanism required";
+ return -EINVAL;
}
- if (snprintf(cc->cipher, CRYPTO_MAX_ALG_NAME, "%s(%s)",
- chainmode, cipher) >= CRYPTO_MAX_ALG_NAME) {
- ti->error = "Chain mode + cipher name is too long";
- goto bad_cipher;
+ cipher_api = kmalloc(CRYPTO_MAX_ALG_NAME, GFP_KERNEL);
+ if (!cipher_api)
+ goto bad_mem;
+
+ ret = snprintf(cipher_api, CRYPTO_MAX_ALG_NAME,
+ "%s(%s)", chainmode, cipher);
+ if (ret < 0) {
+ kfree(cipher_api);
+ goto bad_mem;
}
- tfm = crypto_alloc_ablkcipher(cc->cipher, 0, 0);
- if (IS_ERR(tfm)) {
+ /* Allocate cipher */
+ cc->tfm = crypto_alloc_ablkcipher(cipher_api, 0, 0);
+ if (IS_ERR(cc->tfm)) {
+ ret = PTR_ERR(cc->tfm);
ti->error = "Error allocating crypto tfm";
- goto bad_cipher;
+ goto bad;
}
- strcpy(cc->cipher, cipher);
- strcpy(cc->chainmode, chainmode);
- cc->tfm = tfm;
-
- if (crypt_set_key(cc, argv[1]) < 0) {
+ /* Initialize and set key */
+ ret = crypt_set_key(cc, key);
+ if (ret < 0) {
ti->error = "Error decoding and setting key";
- goto bad_ivmode;
+ goto bad;
}
- /*
- * Choose ivmode. Valid modes: "plain", "essiv:<esshash>", "benbi".
- * See comments at iv code
- */
+ /* Initialize IV */
+ cc->iv_size = crypto_ablkcipher_ivsize(cc->tfm);
+ if (cc->iv_size)
+ /* at least a 64 bit sector number should fit in our buffer */
+ cc->iv_size = max(cc->iv_size,
+ (unsigned int)(sizeof(u64) / sizeof(u8)));
+ else if (ivmode) {
+ DMWARN("Selected cipher does not support IVs");
+ ivmode = NULL;
+ }
+ /* Choose ivmode, see comments at iv code. */
if (ivmode == NULL)
cc->iv_gen_ops = NULL;
else if (strcmp(ivmode, "plain") == 0)
else if (strcmp(ivmode, "null") == 0)
cc->iv_gen_ops = &crypt_iv_null_ops;
else {
+ ret = -EINVAL;
ti->error = "Invalid IV mode";
- goto bad_ivmode;
+ goto bad;
}
- if (cc->iv_gen_ops && cc->iv_gen_ops->ctr &&
- cc->iv_gen_ops->ctr(cc, ti, ivopts) < 0)
- goto bad_ivmode;
-
- if (cc->iv_gen_ops && cc->iv_gen_ops->init &&
- cc->iv_gen_ops->init(cc) < 0) {
- ti->error = "Error initialising IV";
- goto bad_slab_pool;
+ /* Allocate IV */
+ if (cc->iv_gen_ops && cc->iv_gen_ops->ctr) {
+ ret = cc->iv_gen_ops->ctr(cc, ti, ivopts);
+ if (ret < 0) {
+ ti->error = "Error creating IV";
+ goto bad;
+ }
}
- cc->iv_size = crypto_ablkcipher_ivsize(tfm);
- if (cc->iv_size)
- /* at least a 64 bit sector number should fit in our buffer */
- cc->iv_size = max(cc->iv_size,
- (unsigned int)(sizeof(u64) / sizeof(u8)));
- else {
- if (cc->iv_gen_ops) {
- DMWARN("Selected cipher does not support IVs");
- if (cc->iv_gen_ops->dtr)
- cc->iv_gen_ops->dtr(cc);
- cc->iv_gen_ops = NULL;
+ /* Initialize IV (set keys for ESSIV etc) */
+ if (cc->iv_gen_ops && cc->iv_gen_ops->init) {
+ ret = cc->iv_gen_ops->init(cc);
+ if (ret < 0) {
+ ti->error = "Error initialising IV";
+ goto bad;
}
}
+ ret = 0;
+bad:
+ kfree(cipher_api);
+ return ret;
+
+bad_mem:
+ ti->error = "Cannot allocate cipher strings";
+ return -ENOMEM;
+}
+
+/*
+ * Construct an encryption mapping:
+ * <cipher> <key> <iv_offset> <dev_path> <start>
+ */
+static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
+{
+ struct crypt_config *cc;
+ unsigned int key_size;
+ unsigned long long tmpll;
+ int ret;
+
+ if (argc != 5) {
+ ti->error = "Not enough arguments";
+ return -EINVAL;
+ }
+
+ key_size = strlen(argv[1]) >> 1;
+
+ cc = kzalloc(sizeof(*cc) + key_size * sizeof(u8), GFP_KERNEL);
+ if (!cc) {
+ ti->error = "Cannot allocate encryption context";
+ return -ENOMEM;
+ }
+
+ ti->private = cc;
+ ret = crypt_ctr_cipher(ti, argv[0], argv[1]);
+ if (ret < 0)
+ goto bad;
+
+ ret = -ENOMEM;
cc->io_pool = mempool_create_slab_pool(MIN_IOS, _crypt_io_pool);
if (!cc->io_pool) {
ti->error = "Cannot allocate crypt io mempool";
- goto bad_slab_pool;
+ goto bad;
}
cc->dmreq_start = sizeof(struct ablkcipher_request);
- cc->dmreq_start += crypto_ablkcipher_reqsize(tfm);
+ cc->dmreq_start += crypto_ablkcipher_reqsize(cc->tfm);
cc->dmreq_start = ALIGN(cc->dmreq_start, crypto_tfm_ctx_alignment());
- cc->dmreq_start += crypto_ablkcipher_alignmask(tfm) &
+ cc->dmreq_start += crypto_ablkcipher_alignmask(cc->tfm) &
~(crypto_tfm_ctx_alignment() - 1);
cc->req_pool = mempool_create_kmalloc_pool(MIN_IOS, cc->dmreq_start +
sizeof(struct dm_crypt_request) + cc->iv_size);
if (!cc->req_pool) {
ti->error = "Cannot allocate crypt request mempool";
- goto bad_req_pool;
+ goto bad;
}
cc->req = NULL;
cc->page_pool = mempool_create_page_pool(MIN_POOL_PAGES, 0);
if (!cc->page_pool) {
ti->error = "Cannot allocate page mempool";
- goto bad_page_pool;
+ goto bad;
}
cc->bs = bioset_create(MIN_IOS, 0);
if (!cc->bs) {
ti->error = "Cannot allocate crypt bioset";
- goto bad_bs;
+ goto bad;
}
+ ret = -EINVAL;
if (sscanf(argv[2], "%llu", &tmpll) != 1) {
ti->error = "Invalid iv_offset sector";
- goto bad_device;
+ goto bad;
}
cc->iv_offset = tmpll;
- if (sscanf(argv[4], "%llu", &tmpll) != 1) {
- ti->error = "Invalid device sector";
- goto bad_device;
- }
- cc->start = tmpll;
-
if (dm_get_device(ti, argv[3], dm_table_get_mode(ti->table), &cc->dev)) {
ti->error = "Device lookup failed";
- goto bad_device;
+ goto bad;
}
- if (ivmode && cc->iv_gen_ops) {
- if (ivopts)
- *(ivopts - 1) = ':';
- cc->iv_mode = kmalloc(strlen(ivmode) + 1, GFP_KERNEL);
- if (!cc->iv_mode) {
- ti->error = "Error kmallocing iv_mode string";
- goto bad_ivmode_string;
- }
- strcpy(cc->iv_mode, ivmode);
- } else
- cc->iv_mode = NULL;
+ if (sscanf(argv[4], "%llu", &tmpll) != 1) {
+ ti->error = "Invalid device sector";
+ goto bad;
+ }
+ cc->start = tmpll;
+ ret = -ENOMEM;
cc->io_queue = create_singlethread_workqueue("kcryptd_io");
if (!cc->io_queue) {
ti->error = "Couldn't create kcryptd io queue";
- goto bad_io_queue;
+ goto bad;
}
cc->crypt_queue = create_singlethread_workqueue("kcryptd");
if (!cc->crypt_queue) {
ti->error = "Couldn't create kcryptd queue";
- goto bad_crypt_queue;
+ goto bad;
}
ti->num_flush_requests = 1;
- ti->private = cc;
return 0;
-bad_crypt_queue:
- destroy_workqueue(cc->io_queue);
-bad_io_queue:
- kfree(cc->iv_mode);
-bad_ivmode_string:
- dm_put_device(ti, cc->dev);
-bad_device:
- bioset_free(cc->bs);
-bad_bs:
- mempool_destroy(cc->page_pool);
-bad_page_pool:
- mempool_destroy(cc->req_pool);
-bad_req_pool:
- mempool_destroy(cc->io_pool);
-bad_slab_pool:
- if (cc->iv_gen_ops && cc->iv_gen_ops->dtr)
- cc->iv_gen_ops->dtr(cc);
-bad_ivmode:
- crypto_free_ablkcipher(tfm);
-bad_cipher:
- /* Must zero key material before freeing */
- kzfree(cc);
- return -EINVAL;
-}
-
-static void crypt_dtr(struct dm_target *ti)
-{
- struct crypt_config *cc = (struct crypt_config *) ti->private;
-
- destroy_workqueue(cc->io_queue);
- destroy_workqueue(cc->crypt_queue);
-
- if (cc->req)
- mempool_free(cc->req, cc->req_pool);
-
- bioset_free(cc->bs);
- mempool_destroy(cc->page_pool);
- mempool_destroy(cc->req_pool);
- mempool_destroy(cc->io_pool);
-
- kfree(cc->iv_mode);
- if (cc->iv_gen_ops && cc->iv_gen_ops->dtr)
- cc->iv_gen_ops->dtr(cc);
- crypto_free_ablkcipher(cc->tfm);
- dm_put_device(ti, cc->dev);
-
- /* Must zero key material before freeing */
- kzfree(cc);
+bad:
+ crypt_dtr(ti);
+ return ret;
}
static int crypt_map(struct dm_target *ti, struct bio *bio,
return DM_MAPIO_REMAPPED;
}
- io = crypt_io_alloc(ti, bio, bio->bi_sector - ti->begin);
+ io = crypt_io_alloc(ti, bio, dm_target_offset(ti, bio->bi_sector));
if (bio_data_dir(io->base_bio) == READ)
kcryptd_queue_io(io);
static int crypt_status(struct dm_target *ti, status_type_t type,
char *result, unsigned int maxlen)
{
- struct crypt_config *cc = (struct crypt_config *) ti->private;
+ struct crypt_config *cc = ti->private;
unsigned int sz = 0;
switch (type) {
break;
case STATUSTYPE_TABLE:
- if (cc->iv_mode)
- DMEMIT("%s-%s-%s ", cc->cipher, cc->chainmode,
- cc->iv_mode);
+ if (cc->cipher_mode)
+ DMEMIT("%s-%s ", cc->cipher, cc->cipher_mode);
else
- DMEMIT("%s-%s ", cc->cipher, cc->chainmode);
+ DMEMIT("%s ", cc->cipher);
if (cc->key_size > 0) {
if ((maxlen - sz) < ((cc->key_size << 1) + 1))
return max_size;
bvm->bi_bdev = cc->dev->bdev;
- bvm->bi_sector = cc->start + bvm->bi_sector - ti->begin;
+ bvm->bi_sector = cc->start + dm_target_offset(ti, bvm->bi_sector);
return min(max_size, q->merge_bvec_fn(q, bvm, biovec));
}
atomic_set(&dc->may_delay, 1);
ti->num_flush_requests = 1;
+ ti->num_discard_requests = 1;
ti->private = dc;
return 0;
bio->bi_bdev = dc->dev_write->bdev;
if (bio_sectors(bio))
bio->bi_sector = dc->start_write +
- (bio->bi_sector - ti->begin);
+ dm_target_offset(ti, bio->bi_sector);
return delay_bio(dc, dc->write_delay, bio);
}
bio->bi_bdev = dc->dev_read->bdev;
- bio->bi_sector = dc->start_read +
- (bio->bi_sector - ti->begin);
+ bio->bi_sector = dc->start_read + dm_target_offset(ti, bio->bi_sector);
return delay_bio(dc, dc->read_delay, bio);
}
/* Validate the chunk size against the device block size */
if (chunk_size %
- (bdev_logical_block_size(dm_snap_cow(store->snap)->bdev) >> 9)) {
+ (bdev_logical_block_size(dm_snap_cow(store->snap)->bdev) >> 9) ||
+ chunk_size %
+ (bdev_logical_block_size(dm_snap_origin(store->snap)->bdev) >> 9)) {
*error = "Chunk size is not a multiple of device blocksize";
return -EINVAL;
}
};
/*
- * Obtain the cow device used by a given snapshot.
+ * Obtain the origin or cow device used by a given snapshot.
*/
+struct dm_dev *dm_snap_origin(struct dm_snapshot *snap);
struct dm_dev *dm_snap_cow(struct dm_snapshot *snap);
/*
BUG_ON(num_regions > DM_IO_MAX_REGIONS);
if (sync)
- rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
+ rw |= REQ_SYNC | REQ_UNPLUG;
/*
* For multiple regions we need to be careful to rewind
*/
for (i = 0; i < num_regions; i++) {
*dp = old_pages;
- if (where[i].count || (rw & (1 << BIO_RW_BARRIER)))
+ if (where[i].count || (rw & REQ_HARDBARRIER))
do_region(rw, i, where + i, dp, io);
}
}
set_current_state(TASK_RUNNING);
- if (io->eopnotsupp_bits && (rw & (1 << BIO_RW_BARRIER))) {
- rw &= ~(1 << BIO_RW_BARRIER);
+ if (io->eopnotsupp_bits && (rw & REQ_HARDBARRIER)) {
+ rw &= ~REQ_HARDBARRIER;
goto retry;
}
* New collapsed (a)synchronous interface.
*
* If the IO is asynchronous (i.e. it has notify.fn), you must either unplug
- * the queue with blk_unplug() some time later or set the BIO_RW_SYNC bit in
- * io_req->bi_rw. If you fail to do one of these, the IO will be submitted to
+ * the queue with blk_unplug() some time later or set REQ_SYNC in
+io_req->bi_rw. If you fail to do one of these, the IO will be submitted to
* the disk after q->unplug_delay, which defaults to 3ms in blk-settings.c.
*/
int dm_io(struct dm_io_request *io_req, unsigned num_regions,
static void dm_hash_remove_all(int keep_open_devices)
{
- int i, dev_skipped, dev_removed;
+ int i, dev_skipped;
struct hash_cell *hc;
- struct list_head *tmp, *n;
+ struct mapped_device *md;
+
+retry:
+ dev_skipped = 0;
down_write(&_hash_lock);
-retry:
- dev_skipped = dev_removed = 0;
for (i = 0; i < NUM_BUCKETS; i++) {
- list_for_each_safe (tmp, n, _name_buckets + i) {
- hc = list_entry(tmp, struct hash_cell, name_list);
+ list_for_each_entry(hc, _name_buckets + i, name_list) {
+ md = hc->md;
+ dm_get(md);
- if (keep_open_devices &&
- dm_lock_for_deletion(hc->md)) {
+ if (keep_open_devices && dm_lock_for_deletion(md)) {
+ dm_put(md);
dev_skipped++;
continue;
}
+
__hash_remove(hc);
- dev_removed = 1;
- }
- }
- /*
- * Some mapped devices may be using other mapped devices, so if any
- * still exist, repeat until we make no further progress.
- */
- if (dev_skipped) {
- if (dev_removed)
- goto retry;
+ up_write(&_hash_lock);
- DMWARN("remove_all left %d open device(s)", dev_skipped);
+ dm_put(md);
+ if (likely(keep_open_devices))
+ dm_destroy(md);
+ else
+ dm_destroy_immediate(md);
+
+ /*
+ * Some mapped devices may be using other mapped
+ * devices, so repeat until we make no further
+ * progress. If a new mapped device is created
+ * here it will also get removed.
+ */
+ goto retry;
+ }
}
up_write(&_hash_lock);
+
+ if (dev_skipped)
+ DMWARN("remove_all left %d open device(s)", dev_skipped);
}
-static int dm_hash_rename(uint32_t cookie, uint32_t *flags, const char *old,
- const char *new)
+static struct mapped_device *dm_hash_rename(struct dm_ioctl *param,
+ const char *new)
{
char *new_name, *old_name;
struct hash_cell *hc;
struct dm_table *table;
+ struct mapped_device *md;
/*
* duplicate new.
*/
new_name = kstrdup(new, GFP_KERNEL);
if (!new_name)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
down_write(&_hash_lock);
*/
hc = __get_name_cell(new);
if (hc) {
- DMWARN("asked to rename to an already existing name %s -> %s",
- old, new);
+ DMWARN("asked to rename to an already-existing name %s -> %s",
+ param->name, new);
dm_put(hc->md);
up_write(&_hash_lock);
kfree(new_name);
- return -EBUSY;
+ return ERR_PTR(-EBUSY);
}
/*
* Is there such a device as 'old' ?
*/
- hc = __get_name_cell(old);
+ hc = __get_name_cell(param->name);
if (!hc) {
- DMWARN("asked to rename a non existent device %s -> %s",
- old, new);
+ DMWARN("asked to rename a non-existent device %s -> %s",
+ param->name, new);
up_write(&_hash_lock);
kfree(new_name);
- return -ENXIO;
+ return ERR_PTR(-ENXIO);
}
/*
dm_table_put(table);
}
- if (!dm_kobject_uevent(hc->md, KOBJ_CHANGE, cookie))
- *flags |= DM_UEVENT_GENERATED_FLAG;
+ if (!dm_kobject_uevent(hc->md, KOBJ_CHANGE, param->event_nr))
+ param->flags |= DM_UEVENT_GENERATED_FLAG;
- dm_put(hc->md);
+ md = hc->md;
up_write(&_hash_lock);
kfree(old_name);
- return 0;
+
+ return md;
}
/*-----------------------------------------------------------------
* Fills in a dm_ioctl structure, ready for sending back to
* userland.
*/
-static int __dev_status(struct mapped_device *md, struct dm_ioctl *param)
+static void __dev_status(struct mapped_device *md, struct dm_ioctl *param)
{
struct gendisk *disk = dm_disk(md);
struct dm_table *table;
dm_table_put(table);
}
}
-
- return 0;
}
static int dev_create(struct dm_ioctl *param, size_t param_size)
r = dm_hash_insert(param->name, *param->uuid ? param->uuid : NULL, md);
if (r) {
dm_put(md);
+ dm_destroy(md);
return r;
}
param->flags &= ~DM_INACTIVE_PRESENT_FLAG;
- r = __dev_status(md, param);
+ __dev_status(md, param);
+
dm_put(md);
- return r;
+ return 0;
}
/*
param->flags |= DM_UEVENT_GENERATED_FLAG;
dm_put(md);
+ dm_destroy(md);
return 0;
}
{
int r;
char *new_name = (char *) param + param->data_start;
+ struct mapped_device *md;
if (new_name < param->data ||
invalid_str(new_name, (void *) param + param_size) ||
if (r)
return r;
- param->data_size = 0;
+ md = dm_hash_rename(param, new_name);
+ if (IS_ERR(md))
+ return PTR_ERR(md);
+
+ __dev_status(md, param);
+ dm_put(md);
- return dm_hash_rename(param->event_nr, ¶m->flags, param->name,
- new_name);
+ return 0;
}
static int dev_set_geometry(struct dm_ioctl *param, size_t param_size)
geometry.start = indata[3];
r = dm_set_geometry(md, &geometry);
- if (!r)
- r = __dev_status(md, param);
param->data_size = 0;
if (param->flags & DM_NOFLUSH_FLAG)
suspend_flags |= DM_SUSPEND_NOFLUSH_FLAG;
- if (!dm_suspended_md(md))
+ if (!dm_suspended_md(md)) {
r = dm_suspend(md, suspend_flags);
+ if (r)
+ goto out;
+ }
- if (!r)
- r = __dev_status(md, param);
+ __dev_status(md, param);
+out:
dm_put(md);
+
return r;
}
dm_table_destroy(old_map);
if (!r)
- r = __dev_status(md, param);
+ __dev_status(md, param);
dm_put(md);
return r;
*/
static int dev_status(struct dm_ioctl *param, size_t param_size)
{
- int r;
struct mapped_device *md;
md = find_device(param);
if (!md)
return -ENXIO;
- r = __dev_status(md, param);
+ __dev_status(md, param);
dm_put(md);
- return r;
+
+ return 0;
}
/*
*/
static int dev_wait(struct dm_ioctl *param, size_t param_size)
{
- int r;
+ int r = 0;
struct mapped_device *md;
struct dm_table *table;
* changed to trigger the event, so we may as well tell
* him and save an ioctl.
*/
- r = __dev_status(md, param);
- if (r)
- goto out;
+ __dev_status(md, param);
table = dm_get_live_or_inactive_table(md, param);
if (table) {
dm_table_put(table);
}
- out:
+out:
dm_put(md);
+
return r;
}
next = spec->next;
}
- r = dm_table_set_type(table);
- if (r) {
- DMWARN("unable to set table type");
- return r;
- }
-
return dm_table_complete(table);
}
-static int table_prealloc_integrity(struct dm_table *t,
- struct mapped_device *md)
-{
- struct list_head *devices = dm_table_get_devices(t);
- struct dm_dev_internal *dd;
-
- list_for_each_entry(dd, devices, list)
- if (bdev_get_integrity(dd->dm_dev.bdev))
- return blk_integrity_register(dm_disk(md), NULL);
-
- return 0;
-}
-
static int table_load(struct dm_ioctl *param, size_t param_size)
{
int r;
goto out;
}
- r = table_prealloc_integrity(t, md);
- if (r) {
- DMERR("%s: could not register integrity profile.",
- dm_device_name(md));
+ /* Protect md->type and md->queue against concurrent table loads. */
+ dm_lock_md_type(md);
+ if (dm_get_md_type(md) == DM_TYPE_NONE)
+ /* Initial table load: acquire type of table. */
+ dm_set_md_type(md, dm_table_get_type(t));
+ else if (dm_get_md_type(md) != dm_table_get_type(t)) {
+ DMWARN("can't change device type after initial table load.");
dm_table_destroy(t);
+ dm_unlock_md_type(md);
+ r = -EINVAL;
goto out;
}
- r = dm_table_alloc_md_mempools(t);
+ /* setup md->queue to reflect md's type (may block) */
+ r = dm_setup_md_queue(md);
if (r) {
- DMWARN("unable to allocate mempools for this table");
+ DMWARN("unable to set up device queue for new table.");
dm_table_destroy(t);
+ dm_unlock_md_type(md);
goto out;
}
+ dm_unlock_md_type(md);
+ /* stage inactive table */
down_write(&_hash_lock);
hc = dm_get_mdptr(md);
if (!hc || hc->md != md) {
up_write(&_hash_lock);
param->flags |= DM_INACTIVE_PRESENT_FLAG;
- r = __dev_status(md, param);
+ __dev_status(md, param);
out:
dm_put(md);
static int table_clear(struct dm_ioctl *param, size_t param_size)
{
- int r;
struct hash_cell *hc;
struct mapped_device *md;
param->flags &= ~DM_INACTIVE_PRESENT_FLAG;
- r = __dev_status(hc->md, param);
+ __dev_status(hc->md, param);
md = hc->md;
up_write(&_hash_lock);
dm_put(md);
- return r;
+
+ return 0;
}
/*
static int table_deps(struct dm_ioctl *param, size_t param_size)
{
- int r = 0;
struct mapped_device *md;
struct dm_table *table;
if (!md)
return -ENXIO;
- r = __dev_status(md, param);
- if (r)
- goto out;
+ __dev_status(md, param);
table = dm_get_live_or_inactive_table(md, param);
if (table) {
dm_table_put(table);
}
- out:
dm_put(md);
- return r;
+
+ return 0;
}
/*
*/
static int table_status(struct dm_ioctl *param, size_t param_size)
{
- int r;
struct mapped_device *md;
struct dm_table *table;
if (!md)
return -ENXIO;
- r = __dev_status(md, param);
- if (r)
- goto out;
+ __dev_status(md, param);
table = dm_get_live_or_inactive_table(md, param);
if (table) {
dm_table_put(table);
}
-out:
dm_put(md);
- return r;
+
+ return 0;
}
/*
if (!md)
return -ENXIO;
- r = __dev_status(md, param);
- if (r)
- goto out;
-
if (tmsg < (struct dm_target_msg *) param->data ||
invalid_str(tmsg->message, (void *) param + param_size)) {
DMWARN("Invalid target message parameters.");
#endif
static const struct file_operations _ctl_fops = {
+ .open = nonseekable_open,
.unlocked_ioctl = dm_ctl_ioctl,
.compat_ioctl = dm_compat_ctl_ioctl,
.owner = THIS_MODULE,
};
static struct miscdevice _dm_misc = {
- .minor = MISC_DYNAMIC_MINOR,
+ .minor = MAPPER_CTRL_MINOR,
.name = DM_NAME,
- .nodename = "mapper/control",
+ .nodename = DM_DIR "/" DM_CONTROL_NODE,
.fops = &_ctl_fops
};
+MODULE_ALIAS_MISCDEV(MAPPER_CTRL_MINOR);
+MODULE_ALIAS("devname:" DM_DIR "/" DM_CONTROL_NODE);
+
/*
* Create misc character device and link to DM_DIR/control.
*/
{
int r;
struct dm_io_request io_req = {
- .bi_rw = job->rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG),
+ .bi_rw = job->rw | REQ_SYNC | REQ_UNPLUG,
.mem.type = DM_IO_PAGE_LIST,
.mem.ptr.pl = job->pages,
.mem.offset = job->offset,
}
ti->num_flush_requests = 1;
+ ti->num_discard_requests = 1;
ti->private = lc;
return 0;
{
struct linear_c *lc = ti->private;
- return lc->start + (bi_sector - ti->begin);
+ return lc->start + dm_target_offset(ti, bi_sector);
}
static void linear_map_bio(struct dm_target *ti, struct bio *bio)
if (as->argc < nr_params) {
ti->error = "not enough path parameters";
+ r = -EINVAL;
goto bad;
}
}
ti->num_flush_requests = 1;
+ ti->num_discard_requests = 1;
return 0;
if (error == -EOPNOTSUPP)
return error;
+ if (clone->cmd_flags & REQ_DISCARD)
+ /*
+ * Pass all discard request failures up.
+ * FIXME: only fail_path if the discard failed due to a
+ * transport problem. This requires precise understanding
+ * of the underlying failure (e.g. the SCSI sense).
+ */
+ return error;
+
if (mpio->pgpath)
fail_path(mpio->pgpath);
{
if (unlikely(!bio->bi_size))
return 0;
- return m->offset + (bio->bi_sector - m->ms->ti->begin);
+ return m->offset + dm_target_offset(m->ms->ti, bio->bi_sector);
}
static void map_bio(struct mirror *m, struct bio *bio)
if (error == -EOPNOTSUPP)
goto out;
- if ((error == -EWOULDBLOCK) && bio_rw_flagged(bio, BIO_RW_AHEAD))
+ if ((error == -EWOULDBLOCK) && (bio->bi_rw & REQ_RAHEAD))
goto out;
if (unlikely(error)) {
*/
static chunk_t area_location(struct pstore *ps, chunk_t area)
{
- return 1 + ((ps->exceptions_per_area + 1) * area);
+ return NUM_SNAPSHOT_HDR_CHUNKS + ((ps->exceptions_per_area + 1) * area);
}
/*
* ps->current_area does not get reduced by prepare_merge() until
* after commit_merge() has removed the nr_merged previous exceptions.
*/
- ps->next_free = (area_location(ps, ps->current_area) - 1) +
- (ps->current_committed + 1) + NUM_SNAPSHOT_HDR_CHUNKS;
+ ps->next_free = area_location(ps, ps->current_area) +
+ ps->current_committed + 1;
return 0;
}
#define RUNNING_MERGE 0
#define SHUTDOWN_MERGE 1
+struct dm_dev *dm_snap_origin(struct dm_snapshot *s)
+{
+ return s->origin;
+}
+EXPORT_SYMBOL(dm_snap_origin);
+
struct dm_dev *dm_snap_cow(struct dm_snapshot *s)
{
return s->cow;
origin_mode = FMODE_WRITE;
}
- origin_path = argv[0];
- argv++;
- argc--;
-
s = kmalloc(sizeof(*s), GFP_KERNEL);
if (!s) {
ti->error = "Cannot allocate snapshot context private "
goto bad;
}
+ origin_path = argv[0];
+ argv++;
+ argc--;
+
+ r = dm_get_device(ti, origin_path, origin_mode, &s->origin);
+ if (r) {
+ ti->error = "Cannot get origin device";
+ goto bad_origin;
+ }
+
cow_path = argv[0];
argv++;
argc--;
argv += args_used;
argc -= args_used;
- r = dm_get_device(ti, origin_path, origin_mode, &s->origin);
- if (r) {
- ti->error = "Cannot get origin device";
- goto bad_origin;
- }
-
s->ti = ti;
s->valid = 1;
s->active = 0;
dm_exception_table_exit(&s->complete, exception_cache);
bad_hash_tables:
- dm_put_device(ti, s->origin);
-
-bad_origin:
dm_exception_store_destroy(s->store);
bad_store:
dm_put_device(ti, s->cow);
bad_cow:
+ dm_put_device(ti, s->origin);
+
+bad_origin:
kfree(s);
bad:
mempool_destroy(s->pending_pool);
- dm_put_device(ti, s->origin);
-
dm_exception_store_destroy(s->store);
dm_put_device(ti, s->cow);
+ dm_put_device(ti, s->origin);
+
kfree(s);
}
chunk_t chunk;
if (unlikely(bio_empty_barrier(bio))) {
- if (!map_context->flush_request)
+ if (!map_context->target_request_nr)
bio->bi_bdev = s->origin->bdev;
else
bio->bi_bdev = s->cow->bdev;
iterate_devices_callout_fn fn, void *data)
{
struct dm_snapshot *snap = ti->private;
+ int r;
+
+ r = fn(ti, snap->origin, 0, ti->len, data);
+
+ if (!r)
+ r = fn(ti, snap->cow, 0, get_dev_size(snap->cow->bdev), data);
- return fn(ti, snap->origin, 0, ti->len, data);
+ return r;
}
return 0;
}
+static int origin_merge(struct dm_target *ti, struct bvec_merge_data *bvm,
+ struct bio_vec *biovec, int max_size)
+{
+ struct dm_dev *dev = ti->private;
+ struct request_queue *q = bdev_get_queue(dev->bdev);
+
+ if (!q->merge_bvec_fn)
+ return max_size;
+
+ bvm->bi_bdev = dev->bdev;
+ bvm->bi_sector = bvm->bi_sector;
+
+ return min(max_size, q->merge_bvec_fn(q, bvm, biovec));
+}
+
static int origin_iterate_devices(struct dm_target *ti,
iterate_devices_callout_fn fn, void *data)
{
.map = origin_map,
.resume = origin_resume,
.status = origin_status,
+ .merge = origin_merge,
.iterate_devices = origin_iterate_devices,
};
struct stripe_c {
uint32_t stripes;
+ int stripes_shift;
+ sector_t stripes_mask;
/* The size of this target / num. stripes */
sector_t stripe_width;
/* Set pointer to dm target; used in trigger_event */
sc->ti = ti;
-
sc->stripes = stripes;
sc->stripe_width = width;
+
+ if (stripes & (stripes - 1))
+ sc->stripes_shift = -1;
+ else {
+ sc->stripes_shift = ffs(stripes) - 1;
+ sc->stripes_mask = ((sector_t) stripes) - 1;
+ }
+
ti->split_io = chunk_size;
ti->num_flush_requests = stripes;
+ ti->num_discard_requests = stripes;
+ sc->chunk_shift = ffs(chunk_size) - 1;
sc->chunk_mask = ((sector_t) chunk_size) - 1;
- for (sc->chunk_shift = 0; chunk_size; sc->chunk_shift++)
- chunk_size >>= 1;
- sc->chunk_shift--;
/*
* Get the stripe destinations.
kfree(sc);
}
+static void stripe_map_sector(struct stripe_c *sc, sector_t sector,
+ uint32_t *stripe, sector_t *result)
+{
+ sector_t offset = dm_target_offset(sc->ti, sector);
+ sector_t chunk = offset >> sc->chunk_shift;
+
+ if (sc->stripes_shift < 0)
+ *stripe = sector_div(chunk, sc->stripes);
+ else {
+ *stripe = chunk & sc->stripes_mask;
+ chunk >>= sc->stripes_shift;
+ }
+
+ *result = (chunk << sc->chunk_shift) | (offset & sc->chunk_mask);
+}
+
+static void stripe_map_range_sector(struct stripe_c *sc, sector_t sector,
+ uint32_t target_stripe, sector_t *result)
+{
+ uint32_t stripe;
+
+ stripe_map_sector(sc, sector, &stripe, result);
+ if (stripe == target_stripe)
+ return;
+ *result &= ~sc->chunk_mask; /* round down */
+ if (target_stripe < stripe)
+ *result += sc->chunk_mask + 1; /* next chunk */
+}
+
+static int stripe_map_discard(struct stripe_c *sc, struct bio *bio,
+ uint32_t target_stripe)
+{
+ sector_t begin, end;
+
+ stripe_map_range_sector(sc, bio->bi_sector, target_stripe, &begin);
+ stripe_map_range_sector(sc, bio->bi_sector + bio_sectors(bio),
+ target_stripe, &end);
+ if (begin < end) {
+ bio->bi_bdev = sc->stripe[target_stripe].dev->bdev;
+ bio->bi_sector = begin + sc->stripe[target_stripe].physical_start;
+ bio->bi_size = to_bytes(end - begin);
+ return DM_MAPIO_REMAPPED;
+ } else {
+ /* The range doesn't map to the target stripe */
+ bio_endio(bio, 0);
+ return DM_MAPIO_SUBMITTED;
+ }
+}
+
static int stripe_map(struct dm_target *ti, struct bio *bio,
union map_info *map_context)
{
- struct stripe_c *sc = (struct stripe_c *) ti->private;
- sector_t offset, chunk;
+ struct stripe_c *sc = ti->private;
uint32_t stripe;
+ unsigned target_request_nr;
if (unlikely(bio_empty_barrier(bio))) {
- BUG_ON(map_context->flush_request >= sc->stripes);
- bio->bi_bdev = sc->stripe[map_context->flush_request].dev->bdev;
+ target_request_nr = map_context->target_request_nr;
+ BUG_ON(target_request_nr >= sc->stripes);
+ bio->bi_bdev = sc->stripe[target_request_nr].dev->bdev;
return DM_MAPIO_REMAPPED;
}
+ if (unlikely(bio->bi_rw & REQ_DISCARD)) {
+ target_request_nr = map_context->target_request_nr;
+ BUG_ON(target_request_nr >= sc->stripes);
+ return stripe_map_discard(sc, bio, target_request_nr);
+ }
- offset = bio->bi_sector - ti->begin;
- chunk = offset >> sc->chunk_shift;
- stripe = sector_div(chunk, sc->stripes);
+ stripe_map_sector(sc, bio->bi_sector, &stripe, &bio->bi_sector);
+ bio->bi_sector += sc->stripe[stripe].physical_start;
bio->bi_bdev = sc->stripe[stripe].dev->bdev;
- bio->bi_sector = sc->stripe[stripe].physical_start +
- (chunk << sc->chunk_shift) + (offset & sc->chunk_mask);
+
return DM_MAPIO_REMAPPED;
}
if (!error)
return 0; /* I/O complete */
- if ((error == -EWOULDBLOCK) && bio_rw_flagged(bio, BIO_RW_AHEAD))
+ if ((error == -EWOULDBLOCK) && (bio->bi_rw & REQ_RAHEAD))
return error;
if (error == -EOPNOTSUPP)
sector_t *highs;
struct dm_target *targets;
+ unsigned discards_supported:1;
+
/*
* Indicates the rw permissions for the new logical
* device. This should be a combination of FMODE_READ
INIT_LIST_HEAD(&t->devices);
atomic_set(&t->holders, 0);
+ t->discards_supported = 1;
if (!num_targets)
num_targets = KEYS_PER_NODE;
msleep(1);
smp_mb();
- /* free the indexes (see dm_table_complete) */
+ /* free the indexes */
if (t->depth >= 2)
vfree(t->index[t->depth - 2]);
t->highs[t->num_targets++] = tgt->begin + tgt->len - 1;
+ if (!tgt->num_discard_requests)
+ t->discards_supported = 0;
+
return 0;
bad:
return r;
}
-int dm_table_set_type(struct dm_table *t)
+static int dm_table_set_type(struct dm_table *t)
{
unsigned i;
unsigned bio_based = 0, request_based = 0;
/*
* Builds the btree to index the map.
*/
-int dm_table_complete(struct dm_table *t)
+static int dm_table_build_index(struct dm_table *t)
{
int r = 0;
unsigned int leaf_nodes;
return r;
}
+/*
+ * Register the mapped device for blk_integrity support if
+ * the underlying devices support it.
+ */
+static int dm_table_prealloc_integrity(struct dm_table *t, struct mapped_device *md)
+{
+ struct list_head *devices = dm_table_get_devices(t);
+ struct dm_dev_internal *dd;
+
+ list_for_each_entry(dd, devices, list)
+ if (bdev_get_integrity(dd->dm_dev.bdev))
+ return blk_integrity_register(dm_disk(md), NULL);
+
+ return 0;
+}
+
+/*
+ * Prepares the table for use by building the indices,
+ * setting the type, and allocating mempools.
+ */
+int dm_table_complete(struct dm_table *t)
+{
+ int r;
+
+ r = dm_table_set_type(t);
+ if (r) {
+ DMERR("unable to set table type");
+ return r;
+ }
+
+ r = dm_table_build_index(t);
+ if (r) {
+ DMERR("unable to build btrees");
+ return r;
+ }
+
+ r = dm_table_prealloc_integrity(t, t->md);
+ if (r) {
+ DMERR("could not register integrity profile.");
+ return r;
+ }
+
+ r = dm_table_alloc_md_mempools(t);
+ if (r)
+ DMERR("unable to allocate mempools");
+
+ return r;
+}
+
static DEFINE_MUTEX(_event_lock);
void dm_table_event_callback(struct dm_table *t,
void (*fn)(void *), void *context)
else
queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, q);
+ if (!dm_table_supports_discards(t))
+ queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
+ else
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
+
dm_table_set_integrity(t);
/*
return t->md;
}
+static int device_discard_capable(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
+{
+ struct request_queue *q = bdev_get_queue(dev->bdev);
+
+ return q && blk_queue_discard(q);
+}
+
+bool dm_table_supports_discards(struct dm_table *t)
+{
+ struct dm_target *ti;
+ unsigned i = 0;
+
+ if (!t->discards_supported)
+ return 0;
+
+ /*
+ * Ensure that at least one underlying device supports discards.
+ * t->devices includes internal dm devices such as mirror logs
+ * so we need to use iterate_devices here, which targets
+ * supporting discard must provide.
+ */
+ while (i < dm_table_get_num_targets(t)) {
+ ti = dm_table_get_target(t, i++);
+
+ if (ti->type->iterate_devices &&
+ ti->type->iterate_devices(ti, device_discard_capable, NULL))
+ return 1;
+ }
+
+ return 0;
+}
+
EXPORT_SYMBOL(dm_vcalloc);
EXPORT_SYMBOL(dm_get_device);
EXPORT_SYMBOL(dm_put_device);
*/
static int io_err_ctr(struct dm_target *tt, unsigned int argc, char **args)
{
+ /*
+ * Return error for discards instead of -EOPNOTSUPP
+ */
+ tt->num_discard_requests = 1;
+
return 0;
}
return -EINVAL;
}
+ /*
+ * Silently drop discards, avoiding -EOPNOTSUPP.
+ */
+ ti->num_discard_requests = 1;
+
return 0;
}
#include <linux/blkpg.h>
#include <linux/bio.h>
#include <linux/buffer_head.h>
+#include <linux/smp_lock.h>
#include <linux/mempool.h>
#include <linux/slab.h>
#include <linux/idr.h>
#include <linux/hdreg.h>
+#include <linux/delay.h>
#include <trace/events/block.h>
unsigned long flags;
struct request_queue *queue;
+ unsigned type;
+ /* Protect queue and type against concurrent access. */
+ struct mutex type_lock;
+
struct gendisk *disk;
char name[16];
{
struct mapped_device *md;
+ lock_kernel();
spin_lock(&_minor_lock);
md = bdev->bd_disk->private_data;
out:
spin_unlock(&_minor_lock);
+ unlock_kernel();
return md ? 0 : -ENXIO;
}
static int dm_blk_close(struct gendisk *disk, fmode_t mode)
{
struct mapped_device *md = disk->private_data;
+
+ lock_kernel();
atomic_dec(&md->open_count);
dm_put(md);
+ unlock_kernel();
+
return 0;
}
*/
spin_lock_irqsave(&md->deferred_lock, flags);
if (__noflush_suspending(md)) {
- if (!bio_rw_flagged(io->bio, BIO_RW_BARRIER))
+ if (!(io->bio->bi_rw & REQ_HARDBARRIER))
bio_list_add_head(&md->deferred,
io->bio);
} else
io_error = io->error;
bio = io->bio;
- if (bio_rw_flagged(bio, BIO_RW_BARRIER)) {
+ if (bio->bi_rw & REQ_HARDBARRIER) {
/*
* There can be just one barrier request so we use
* a per-device variable for error reporting.
* Note that you can't touch the bio after end_io_acct
+ *
+ * We ignore -EOPNOTSUPP for empty flush reported by
+ * underlying devices. We assume that if the device
+ * doesn't support empty barriers, it doesn't need
+ * cache flushing commands.
*/
- if (!md->barrier_error && io_error != -EOPNOTSUPP)
+ if (!md->barrier_error &&
+ !(bio_empty_barrier(bio) && io_error == -EOPNOTSUPP))
md->barrier_error = io_error;
end_io_acct(io);
free_io(md, io);
{
int rw = rq_data_dir(clone);
int run_queue = 1;
- bool is_barrier = blk_barrier_rq(clone);
+ bool is_barrier = clone->cmd_flags & REQ_HARDBARRIER;
struct dm_rq_target_io *tio = clone->end_io_data;
struct mapped_device *md = tio->md;
struct request *rq = tio->orig;
- if (blk_pc_request(rq) && !is_barrier) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC && !is_barrier) {
rq->errors = clone->errors;
rq->resid_len = clone->resid_len;
struct request_queue *q = rq->q;
unsigned long flags;
- if (unlikely(blk_barrier_rq(clone))) {
+ if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) {
/*
* Barrier clones share an original request.
* Leave it to dm_end_request(), which handles this special
struct dm_rq_target_io *tio = clone->end_io_data;
struct request *rq = tio->orig;
- if (unlikely(blk_barrier_rq(clone))) {
+ if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) {
/*
* Barrier clones share an original request. So can't use
* softirq_done with the original.
struct dm_rq_target_io *tio = clone->end_io_data;
struct request *rq = tio->orig;
- if (unlikely(blk_barrier_rq(clone))) {
+ if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) {
/*
* Barrier clones share an original request.
* Leave it to dm_end_request(), which handles this special
dm_complete_request(clone, error);
}
-static sector_t max_io_len(struct mapped_device *md,
- sector_t sector, struct dm_target *ti)
+/*
+ * Return maximum size of I/O possible at the supplied sector up to the current
+ * target boundary.
+ */
+static sector_t max_io_len_target_boundary(sector_t sector, struct dm_target *ti)
{
- sector_t offset = sector - ti->begin;
- sector_t len = ti->len - offset;
+ sector_t target_offset = dm_target_offset(ti, sector);
+
+ return ti->len - target_offset;
+}
+
+static sector_t max_io_len(sector_t sector, struct dm_target *ti)
+{
+ sector_t len = max_io_len_target_boundary(sector, ti);
/*
* Does the target need to split even further ?
*/
if (ti->split_io) {
sector_t boundary;
+ sector_t offset = dm_target_offset(ti, sector);
boundary = ((offset + ti->split_io) & ~(ti->split_io - 1))
- offset;
if (len > boundary)
clone->bi_sector = sector;
clone->bi_bdev = bio->bi_bdev;
- clone->bi_rw = bio->bi_rw & ~(1 << BIO_RW_BARRIER);
+ clone->bi_rw = bio->bi_rw & ~REQ_HARDBARRIER;
clone->bi_vcnt = 1;
clone->bi_size = to_bytes(len);
clone->bi_io_vec->bv_offset = offset;
clone = bio_alloc_bioset(GFP_NOIO, bio->bi_max_vecs, bs);
__bio_clone(clone, bio);
- clone->bi_rw &= ~(1 << BIO_RW_BARRIER);
+ clone->bi_rw &= ~REQ_HARDBARRIER;
clone->bi_destructor = dm_bio_destructor;
clone->bi_sector = sector;
clone->bi_idx = idx;
return tio;
}
-static void __flush_target(struct clone_info *ci, struct dm_target *ti,
- unsigned flush_nr)
+static void __issue_target_request(struct clone_info *ci, struct dm_target *ti,
+ unsigned request_nr, sector_t len)
{
struct dm_target_io *tio = alloc_tio(ci, ti);
struct bio *clone;
- tio->info.flush_request = flush_nr;
+ tio->info.target_request_nr = request_nr;
- clone = bio_alloc_bioset(GFP_NOIO, 0, ci->md->bs);
+ /*
+ * Discard requests require the bio's inline iovecs be initialized.
+ * ci->bio->bi_max_vecs is BIO_INLINE_VECS anyway, for both flush
+ * and discard, so no need for concern about wasted bvec allocations.
+ */
+ clone = bio_alloc_bioset(GFP_NOIO, ci->bio->bi_max_vecs, ci->md->bs);
__bio_clone(clone, ci->bio);
clone->bi_destructor = dm_bio_destructor;
+ if (len) {
+ clone->bi_sector = ci->sector;
+ clone->bi_size = to_bytes(len);
+ }
__map_bio(ti, clone, tio);
}
+static void __issue_target_requests(struct clone_info *ci, struct dm_target *ti,
+ unsigned num_requests, sector_t len)
+{
+ unsigned request_nr;
+
+ for (request_nr = 0; request_nr < num_requests; request_nr++)
+ __issue_target_request(ci, ti, request_nr, len);
+}
+
static int __clone_and_map_empty_barrier(struct clone_info *ci)
{
- unsigned target_nr = 0, flush_nr;
+ unsigned target_nr = 0;
struct dm_target *ti;
while ((ti = dm_table_get_target(ci->map, target_nr++)))
- for (flush_nr = 0; flush_nr < ti->num_flush_requests;
- flush_nr++)
- __flush_target(ci, ti, flush_nr);
+ __issue_target_requests(ci, ti, ti->num_flush_requests, 0);
ci->sector_count = 0;
return 0;
}
+/*
+ * Perform all io with a single clone.
+ */
+static void __clone_and_map_simple(struct clone_info *ci, struct dm_target *ti)
+{
+ struct bio *clone, *bio = ci->bio;
+ struct dm_target_io *tio;
+
+ tio = alloc_tio(ci, ti);
+ clone = clone_bio(bio, ci->sector, ci->idx,
+ bio->bi_vcnt - ci->idx, ci->sector_count,
+ ci->md->bs);
+ __map_bio(ti, clone, tio);
+ ci->sector_count = 0;
+}
+
+static int __clone_and_map_discard(struct clone_info *ci)
+{
+ struct dm_target *ti;
+ sector_t len;
+
+ do {
+ ti = dm_table_find_target(ci->map, ci->sector);
+ if (!dm_target_is_valid(ti))
+ return -EIO;
+
+ /*
+ * Even though the device advertised discard support,
+ * reconfiguration might have changed that since the
+ * check was performed.
+ */
+ if (!ti->num_discard_requests)
+ return -EOPNOTSUPP;
+
+ len = min(ci->sector_count, max_io_len_target_boundary(ci->sector, ti));
+
+ __issue_target_requests(ci, ti, ti->num_discard_requests, len);
+
+ ci->sector += len;
+ } while (ci->sector_count -= len);
+
+ return 0;
+}
+
static int __clone_and_map(struct clone_info *ci)
{
struct bio *clone, *bio = ci->bio;
if (unlikely(bio_empty_barrier(bio)))
return __clone_and_map_empty_barrier(ci);
+ if (unlikely(bio->bi_rw & REQ_DISCARD))
+ return __clone_and_map_discard(ci);
+
ti = dm_table_find_target(ci->map, ci->sector);
if (!dm_target_is_valid(ti))
return -EIO;
- max = max_io_len(ci->md, ci->sector, ti);
-
- /*
- * Allocate a target io object.
- */
- tio = alloc_tio(ci, ti);
+ max = max_io_len(ci->sector, ti);
if (ci->sector_count <= max) {
/*
* Optimise for the simple case where we can do all of
* the remaining io with a single clone.
*/
- clone = clone_bio(bio, ci->sector, ci->idx,
- bio->bi_vcnt - ci->idx, ci->sector_count,
- ci->md->bs);
- __map_bio(ti, clone, tio);
- ci->sector_count = 0;
+ __clone_and_map_simple(ci, ti);
} else if (to_sector(bio->bi_io_vec[ci->idx].bv_len) <= max) {
/*
len += bv_len;
}
+ tio = alloc_tio(ci, ti);
clone = clone_bio(bio, ci->sector, ci->idx, i - ci->idx, len,
ci->md->bs);
__map_bio(ti, clone, tio);
if (!dm_target_is_valid(ti))
return -EIO;
- max = max_io_len(ci->md, ci->sector, ti);
-
- tio = alloc_tio(ci, ti);
+ max = max_io_len(ci->sector, ti);
}
len = min(remaining, max);
+ tio = alloc_tio(ci, ti);
clone = split_bvec(bio, ci->sector, ci->idx,
bv->bv_offset + offset, len,
ci->md->bs);
ci.map = dm_get_live_table(md);
if (unlikely(!ci.map)) {
- if (!bio_rw_flagged(bio, BIO_RW_BARRIER))
+ if (!(bio->bi_rw & REQ_HARDBARRIER))
bio_io_error(bio);
else
if (!md->barrier_error)
/*
* Find maximum amount of I/O that won't need splitting
*/
- max_sectors = min(max_io_len(md, bvm->bi_sector, ti),
+ max_sectors = min(max_io_len(bvm->bi_sector, ti),
(sector_t) BIO_MAX_SECTORS);
max_size = (max_sectors << SECTOR_SHIFT) - bvm->bi_size;
if (max_size < 0)
* we have to queue this io for later.
*/
if (unlikely(test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) ||
- unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ unlikely(bio->bi_rw & REQ_HARDBARRIER)) {
up_read(&md->io_lock);
if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) &&
return _dm_request(q, bio);
}
-/*
- * Mark this request as flush request, so that dm_request_fn() can
- * recognize.
- */
-static void dm_rq_prepare_flush(struct request_queue *q, struct request *rq)
-{
- rq->cmd_type = REQ_TYPE_LINUX_BLOCK;
- rq->cmd[0] = REQ_LB_OP_FLUSH;
-}
-
static bool dm_rq_is_flush_request(struct request *rq)
{
- if (rq->cmd_type == REQ_TYPE_LINUX_BLOCK &&
- rq->cmd[0] == REQ_LB_OP_FLUSH)
+ if (rq->cmd_flags & REQ_FLUSH)
return true;
else
return false;
static void dm_wq_work(struct work_struct *work);
static void dm_rq_barrier_work(struct work_struct *work);
+static void dm_init_md_queue(struct mapped_device *md)
+{
+ /*
+ * Request-based dm devices cannot be stacked on top of bio-based dm
+ * devices. The type of this dm device has not been decided yet.
+ * The type is decided at the first table loading time.
+ * To prevent problematic device stacking, clear the queue flag
+ * for request stacking support until then.
+ *
+ * This queue is new, so no concurrency on the queue_flags.
+ */
+ queue_flag_clear_unlocked(QUEUE_FLAG_STACKABLE, md->queue);
+
+ md->queue->queuedata = md;
+ md->queue->backing_dev_info.congested_fn = dm_any_congested;
+ md->queue->backing_dev_info.congested_data = md;
+ blk_queue_make_request(md->queue, dm_request);
+ blk_queue_bounce_limit(md->queue, BLK_BOUNCE_ANY);
+ md->queue->unplug_fn = dm_unplug_all;
+ blk_queue_merge_bvec(md->queue, dm_merge_bvec);
+}
+
/*
* Allocate and initialise a blank device with a given minor.
*/
if (r < 0)
goto bad_minor;
+ md->type = DM_TYPE_NONE;
init_rwsem(&md->io_lock);
mutex_init(&md->suspend_lock);
+ mutex_init(&md->type_lock);
spin_lock_init(&md->deferred_lock);
spin_lock_init(&md->barrier_error_lock);
rwlock_init(&md->map_lock);
INIT_LIST_HEAD(&md->uevent_list);
spin_lock_init(&md->uevent_lock);
- md->queue = blk_init_queue(dm_request_fn, NULL);
+ md->queue = blk_alloc_queue(GFP_KERNEL);
if (!md->queue)
goto bad_queue;
- /*
- * Request-based dm devices cannot be stacked on top of bio-based dm
- * devices. The type of this dm device has not been decided yet,
- * although we initialized the queue using blk_init_queue().
- * The type is decided at the first table loading time.
- * To prevent problematic device stacking, clear the queue flag
- * for request stacking support until then.
- *
- * This queue is new, so no concurrency on the queue_flags.
- */
- queue_flag_clear_unlocked(QUEUE_FLAG_STACKABLE, md->queue);
- md->saved_make_request_fn = md->queue->make_request_fn;
- md->queue->queuedata = md;
- md->queue->backing_dev_info.congested_fn = dm_any_congested;
- md->queue->backing_dev_info.congested_data = md;
- blk_queue_make_request(md->queue, dm_request);
- blk_queue_bounce_limit(md->queue, BLK_BOUNCE_ANY);
- md->queue->unplug_fn = dm_unplug_all;
- blk_queue_merge_bvec(md->queue, dm_merge_bvec);
- blk_queue_softirq_done(md->queue, dm_softirq_done);
- blk_queue_prep_rq(md->queue, dm_prep_fn);
- blk_queue_lld_busy(md->queue, dm_lld_busy);
- blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN_FLUSH,
- dm_rq_prepare_flush);
+ dm_init_md_queue(md);
md->disk = alloc_disk(1);
if (!md->disk)
return 0;
}
+/*
+ * Functions to manage md->type.
+ * All are required to hold md->type_lock.
+ */
+void dm_lock_md_type(struct mapped_device *md)
+{
+ mutex_lock(&md->type_lock);
+}
+
+void dm_unlock_md_type(struct mapped_device *md)
+{
+ mutex_unlock(&md->type_lock);
+}
+
+void dm_set_md_type(struct mapped_device *md, unsigned type)
+{
+ md->type = type;
+}
+
+unsigned dm_get_md_type(struct mapped_device *md)
+{
+ return md->type;
+}
+
+/*
+ * Fully initialize a request-based queue (->elevator, ->request_fn, etc).
+ */
+static int dm_init_request_based_queue(struct mapped_device *md)
+{
+ struct request_queue *q = NULL;
+
+ if (md->queue->elevator)
+ return 1;
+
+ /* Fully initialize the queue */
+ q = blk_init_allocated_queue(md->queue, dm_request_fn, NULL);
+ if (!q)
+ return 0;
+
+ md->queue = q;
+ md->saved_make_request_fn = md->queue->make_request_fn;
+ dm_init_md_queue(md);
+ blk_queue_softirq_done(md->queue, dm_softirq_done);
+ blk_queue_prep_rq(md->queue, dm_prep_fn);
+ blk_queue_lld_busy(md->queue, dm_lld_busy);
+ blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN_FLUSH);
+
+ elv_register_queue(md->queue);
+
+ return 1;
+}
+
+/*
+ * Setup the DM device's queue based on md's type
+ */
+int dm_setup_md_queue(struct mapped_device *md)
+{
+ if ((dm_get_md_type(md) == DM_TYPE_REQUEST_BASED) &&
+ !dm_init_request_based_queue(md)) {
+ DMWARN("Cannot initialize queue for request-based mapped device");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static struct mapped_device *dm_find_md(dev_t dev)
{
struct mapped_device *md;
md = idr_find(&_minor_idr, minor);
if (md && (md == MINOR_ALLOCED ||
(MINOR(disk_devt(dm_disk(md))) != minor) ||
+ dm_deleting_md(md) ||
test_bit(DMF_FREEING, &md->flags))) {
md = NULL;
goto out;
void dm_get(struct mapped_device *md)
{
atomic_inc(&md->holders);
+ BUG_ON(test_bit(DMF_FREEING, &md->flags));
}
const char *dm_device_name(struct mapped_device *md)
}
EXPORT_SYMBOL_GPL(dm_device_name);
-void dm_put(struct mapped_device *md)
+static void __dm_destroy(struct mapped_device *md, bool wait)
{
struct dm_table *map;
- BUG_ON(test_bit(DMF_FREEING, &md->flags));
+ might_sleep();
- if (atomic_dec_and_lock(&md->holders, &_minor_lock)) {
- map = dm_get_live_table(md);
- idr_replace(&_minor_idr, MINOR_ALLOCED,
- MINOR(disk_devt(dm_disk(md))));
- set_bit(DMF_FREEING, &md->flags);
- spin_unlock(&_minor_lock);
- if (!dm_suspended_md(md)) {
- dm_table_presuspend_targets(map);
- dm_table_postsuspend_targets(map);
- }
- dm_sysfs_exit(md);
- dm_table_put(map);
- dm_table_destroy(__unbind(md));
- free_dev(md);
+ spin_lock(&_minor_lock);
+ map = dm_get_live_table(md);
+ idr_replace(&_minor_idr, MINOR_ALLOCED, MINOR(disk_devt(dm_disk(md))));
+ set_bit(DMF_FREEING, &md->flags);
+ spin_unlock(&_minor_lock);
+
+ if (!dm_suspended_md(md)) {
+ dm_table_presuspend_targets(map);
+ dm_table_postsuspend_targets(map);
}
+
+ /*
+ * Rare, but there may be I/O requests still going to complete,
+ * for example. Wait for all references to disappear.
+ * No one should increment the reference count of the mapped_device,
+ * after the mapped_device state becomes DMF_FREEING.
+ */
+ if (wait)
+ while (atomic_read(&md->holders))
+ msleep(1);
+ else if (atomic_read(&md->holders))
+ DMWARN("%s: Forcibly removing mapped_device still in use! (%d users)",
+ dm_device_name(md), atomic_read(&md->holders));
+
+ dm_sysfs_exit(md);
+ dm_table_put(map);
+ dm_table_destroy(__unbind(md));
+ free_dev(md);
+}
+
+void dm_destroy(struct mapped_device *md)
+{
+ __dm_destroy(md, true);
+}
+
+void dm_destroy_immediate(struct mapped_device *md)
+{
+ __dm_destroy(md, false);
+}
+
+void dm_put(struct mapped_device *md)
+{
+ atomic_dec(&md->holders);
}
EXPORT_SYMBOL_GPL(dm_put);
if (!bio_empty_barrier(bio)) {
__split_and_process_bio(md, bio);
- dm_flush(md);
+ /*
+ * If the request isn't supported, don't waste time with
+ * the second flush.
+ */
+ if (md->barrier_error != -EOPNOTSUPP)
+ dm_flush(md);
}
if (md->barrier_error != DM_ENDIO_REQUEUE)
if (dm_request_based(md))
generic_make_request(c);
else {
- if (bio_rw_flagged(c, BIO_RW_BARRIER))
+ if (c->bi_rw & REQ_HARDBARRIER)
process_barrier(md, c);
else
__split_and_process_bio(md, c);
queue_work(md->wq, &md->work);
}
-static void dm_rq_set_flush_nr(struct request *clone, unsigned flush_nr)
+static void dm_rq_set_target_request_nr(struct request *clone, unsigned request_nr)
{
struct dm_rq_target_io *tio = clone->end_io_data;
- tio->info.flush_request = flush_nr;
+ tio->info.target_request_nr = request_nr;
}
/* Issue barrier requests to targets and wait for their completion. */
ti = dm_table_get_target(map, i);
for (j = 0; j < ti->num_flush_requests; j++) {
clone = clone_rq(md->flush_request, md, GFP_NOIO);
- dm_rq_set_flush_nr(clone, j);
+ dm_rq_set_target_request_nr(clone, j);
atomic_inc(&md->pending[rq_data_dir(clone)]);
map_request(ti, clone, md);
}
goto out;
}
- /* cannot change the device type, once a table is bound */
- if (md->map &&
- (dm_table_get_type(md->map) != dm_table_get_type(table))) {
- DMWARN("can't change the device type after a table is bound");
- goto out;
- }
-
map = __bind(md, table, &limits);
out:
int dm_table_resume_targets(struct dm_table *t);
int dm_table_any_congested(struct dm_table *t, int bdi_bits);
int dm_table_any_busy_target(struct dm_table *t);
-int dm_table_set_type(struct dm_table *t);
unsigned dm_table_get_type(struct dm_table *t);
bool dm_table_request_based(struct dm_table *t);
+bool dm_table_supports_discards(struct dm_table *t);
int dm_table_alloc_md_mempools(struct dm_table *t);
void dm_table_free_md_mempools(struct dm_table *t);
struct dm_md_mempools *dm_table_get_md_mempools(struct dm_table *t);
+void dm_lock_md_type(struct mapped_device *md);
+void dm_unlock_md_type(struct mapped_device *md);
+void dm_set_md_type(struct mapped_device *md, unsigned type);
+unsigned dm_get_md_type(struct mapped_device *md);
+
+int dm_setup_md_queue(struct mapped_device *md);
+
/*
* To check the return value from dm_table_find_target().
*/
int dm_stripe_init(void);
void dm_stripe_exit(void);
+/*
+ * mapped_device operations
+ */
+void dm_destroy(struct mapped_device *md);
+void dm_destroy_immediate(struct mapped_device *md);
int dm_open_count(struct mapped_device *md);
int dm_lock_for_deletion(struct mapped_device *md);
dev_info_t *tmp_dev;
sector_t start_sector;
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) {
md_barrier_request(mddev, bio);
return 0;
}
#include <linux/blkdev.h>
#include <linux/sysctl.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/buffer_head.h> /* for invalidate_bdev */
#include <linux/poll.h>
#include <linux/ctype.h>
* Once ->stop is called and completes, the module will be completely
* unused.
*/
-static void mddev_suspend(mddev_t *mddev)
+void mddev_suspend(mddev_t *mddev)
{
BUG_ON(mddev->suspended);
mddev->suspended = 1;
wait_event(mddev->sb_wait, atomic_read(&mddev->active_io) == 0);
mddev->pers->quiesce(mddev, 1);
}
+EXPORT_SYMBOL_GPL(mddev_suspend);
-static void mddev_resume(mddev_t *mddev)
+void mddev_resume(mddev_t *mddev)
{
mddev->suspended = 0;
wake_up(&mddev->sb_wait);
mddev->pers->quiesce(mddev, 0);
}
+EXPORT_SYMBOL_GPL(mddev_resume);
int mddev_congested(mddev_t *mddev, int bits)
{
/* an empty barrier - all done */
bio_endio(bio, 0);
else {
- bio->bi_rw &= ~(1<<BIO_RW_BARRIER);
+ bio->bi_rw &= ~REQ_HARDBARRIER;
if (mddev->pers->make_request(mddev, bio))
generic_make_request(bio);
mddev->barrier = POST_REQUEST_BARRIER;
}
EXPORT_SYMBOL(md_barrier_request);
+/* Support for plugging.
+ * This mirrors the plugging support in request_queue, but does not
+ * require having a whole queue
+ */
+static void plugger_work(struct work_struct *work)
+{
+ struct plug_handle *plug =
+ container_of(work, struct plug_handle, unplug_work);
+ plug->unplug_fn(plug);
+}
+static void plugger_timeout(unsigned long data)
+{
+ struct plug_handle *plug = (void *)data;
+ kblockd_schedule_work(NULL, &plug->unplug_work);
+}
+void plugger_init(struct plug_handle *plug,
+ void (*unplug_fn)(struct plug_handle *))
+{
+ plug->unplug_flag = 0;
+ plug->unplug_fn = unplug_fn;
+ init_timer(&plug->unplug_timer);
+ plug->unplug_timer.function = plugger_timeout;
+ plug->unplug_timer.data = (unsigned long)plug;
+ INIT_WORK(&plug->unplug_work, plugger_work);
+}
+EXPORT_SYMBOL_GPL(plugger_init);
+
+void plugger_set_plug(struct plug_handle *plug)
+{
+ if (!test_and_set_bit(PLUGGED_FLAG, &plug->unplug_flag))
+ mod_timer(&plug->unplug_timer, jiffies + msecs_to_jiffies(3)+1);
+}
+EXPORT_SYMBOL_GPL(plugger_set_plug);
+
+int plugger_remove_plug(struct plug_handle *plug)
+{
+ if (test_and_clear_bit(PLUGGED_FLAG, &plug->unplug_flag)) {
+ del_timer(&plug->unplug_timer);
+ return 1;
+ } else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(plugger_remove_plug);
+
+
static inline mddev_t *mddev_get(mddev_t *mddev)
{
atomic_inc(&mddev->active);
spin_unlock(&all_mddevs_lock);
}
-static void mddev_init(mddev_t *mddev)
+void mddev_init(mddev_t *mddev)
{
mutex_init(&mddev->open_mutex);
mutex_init(&mddev->reconfig_mutex);
mddev->resync_max = MaxSector;
mddev->level = LEVEL_NONE;
}
+EXPORT_SYMBOL_GPL(mddev_init);
static mddev_t * mddev_find(dev_t unit)
{
* an access to the files will try to take reconfig_mutex
* while holding the file unremovable, which leads to
* a deadlock.
- * So hold open_mutex instead - we are allowed to take
- * it while holding reconfig_mutex, and md_run can
- * use it to wait for the remove to complete.
+ * So hold set sysfs_active while the remove in happeing,
+ * and anything else which might set ->to_remove or my
+ * otherwise change the sysfs namespace will fail with
+ * -EBUSY if sysfs_active is still set.
+ * We set sysfs_active under reconfig_mutex and elsewhere
+ * test it under the same mutex to ensure its correct value
+ * is seen.
*/
struct attribute_group *to_remove = mddev->to_remove;
mddev->to_remove = NULL;
- mutex_lock(&mddev->open_mutex);
+ mddev->sysfs_active = 1;
mutex_unlock(&mddev->reconfig_mutex);
- if (to_remove != &md_redundancy_group)
- sysfs_remove_group(&mddev->kobj, to_remove);
- if (mddev->pers == NULL ||
- mddev->pers->sync_request == NULL) {
- sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
- if (mddev->sysfs_action)
- sysfs_put(mddev->sysfs_action);
- mddev->sysfs_action = NULL;
+ if (mddev->kobj.sd) {
+ if (to_remove != &md_redundancy_group)
+ sysfs_remove_group(&mddev->kobj, to_remove);
+ if (mddev->pers == NULL ||
+ mddev->pers->sync_request == NULL) {
+ sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
+ if (mddev->sysfs_action)
+ sysfs_put(mddev->sysfs_action);
+ mddev->sysfs_action = NULL;
+ }
}
- mutex_unlock(&mddev->open_mutex);
+ mddev->sysfs_active = 0;
} else
mutex_unlock(&mddev->reconfig_mutex);
* if zero is reached.
* If an error occurred, call md_error
*
- * As we might need to resubmit the request if BIO_RW_BARRIER
+ * As we might need to resubmit the request if REQ_HARDBARRIER
* causes ENOTSUPP, we allocate a spare bio...
*/
struct bio *bio = bio_alloc(GFP_NOIO, 1);
- int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG);
+ int rw = REQ_WRITE | REQ_SYNC | REQ_UNPLUG;
bio->bi_bdev = rdev->bdev;
bio->bi_sector = sector;
atomic_inc(&mddev->pending_writes);
if (!test_bit(BarriersNotsupp, &rdev->flags)) {
struct bio *rbio;
- rw |= (1<<BIO_RW_BARRIER);
+ rw |= REQ_HARDBARRIER;
rbio = bio_clone(bio, GFP_NOIO);
rbio->bi_private = bio;
rbio->bi_end_io = super_written_barrier;
struct completion event;
int ret;
- rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
+ rw |= REQ_SYNC | REQ_UNPLUG;
bio->bi_bdev = bdev;
bio->bi_sector = sector;
goto fail;
ko = &part_to_dev(rdev->bdev->bd_part)->kobj;
- if ((err = sysfs_create_link(&rdev->kobj, ko, "block"))) {
- kobject_del(&rdev->kobj);
- goto fail;
- }
- rdev->sysfs_state = sysfs_get_dirent(rdev->kobj.sd, NULL, "state");
+ if (sysfs_create_link(&rdev->kobj, ko, "block"))
+ /* failure here is OK */;
+ rdev->sysfs_state = sysfs_get_dirent_safe(rdev->kobj.sd, "state");
list_add_rcu(&rdev->same_set, &mddev->disks);
bd_claim_by_disk(rdev->bdev, rdev->bdev->bd_holder, mddev->gendisk);
* with the rest of the array)
*/
mdk_rdev_t *rdev;
-
- /* First make sure individual recovery_offsets are correct */
- list_for_each_entry(rdev, &mddev->disks, same_set) {
- if (rdev->raid_disk >= 0 &&
- mddev->delta_disks >= 0 &&
- !test_bit(In_sync, &rdev->flags) &&
- mddev->curr_resync_completed > rdev->recovery_offset)
- rdev->recovery_offset = mddev->curr_resync_completed;
-
- }
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (rdev->sb_events == mddev->events ||
(nospares &&
int sync_req;
int nospares = 0;
- mddev->utime = get_seconds();
- if (mddev->external)
- return;
repeat:
+ /* First make sure individual recovery_offsets are correct */
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (rdev->raid_disk >= 0 &&
+ mddev->delta_disks >= 0 &&
+ !test_bit(In_sync, &rdev->flags) &&
+ mddev->curr_resync_completed > rdev->recovery_offset)
+ rdev->recovery_offset = mddev->curr_resync_completed;
+
+ }
+ if (mddev->external || !mddev->persistent) {
+ clear_bit(MD_CHANGE_DEVS, &mddev->flags);
+ clear_bit(MD_CHANGE_CLEAN, &mddev->flags);
+ wake_up(&mddev->sb_wait);
+ return;
+ }
+
spin_lock_irq(&mddev->write_lock);
+ mddev->utime = get_seconds();
+
set_bit(MD_CHANGE_PENDING, &mddev->flags);
if (test_and_clear_bit(MD_CHANGE_DEVS, &mddev->flags))
force_change = 1;
MD_BUG();
mddev->events --;
}
-
- /*
- * do not write anything to disk if using
- * nonpersistent superblocks
- */
- if (!mddev->persistent) {
- if (!mddev->external)
- clear_bit(MD_CHANGE_PENDING, &mddev->flags);
-
- spin_unlock_irq(&mddev->write_lock);
- wake_up(&mddev->sb_wait);
- return;
- }
sync_sbs(mddev, nospares);
spin_unlock_irq(&mddev->write_lock);
set_bit(In_sync, &rdev->flags);
err = 0;
}
- if (!err && rdev->sysfs_state)
- sysfs_notify_dirent(rdev->sysfs_state);
+ if (!err)
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
return err ? err : len;
}
static struct rdev_sysfs_entry rdev_state =
rdev->raid_disk = -1;
return err;
} else
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&rdev->mddev->kobj, &rdev->kobj, nm))
- printk(KERN_WARNING
- "md: cannot register "
- "%s for %s\n",
- nm, mdname(rdev->mddev));
-
+ /* failure here is OK */;
/* don't wakeup anyone, leave that to userspace. */
} else {
if (slot >= rdev->mddev->raid_disks)
clear_bit(Faulty, &rdev->flags);
clear_bit(WriteMostly, &rdev->flags);
set_bit(In_sync, &rdev->flags);
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
}
return len;
}
.default_attrs = rdev_default_attrs,
};
+void md_rdev_init(mdk_rdev_t *rdev)
+{
+ rdev->desc_nr = -1;
+ rdev->saved_raid_disk = -1;
+ rdev->raid_disk = -1;
+ rdev->flags = 0;
+ rdev->data_offset = 0;
+ rdev->sb_events = 0;
+ rdev->last_read_error.tv_sec = 0;
+ rdev->last_read_error.tv_nsec = 0;
+ atomic_set(&rdev->nr_pending, 0);
+ atomic_set(&rdev->read_errors, 0);
+ atomic_set(&rdev->corrected_errors, 0);
+
+ INIT_LIST_HEAD(&rdev->same_set);
+ init_waitqueue_head(&rdev->blocked_wait);
+}
+EXPORT_SYMBOL_GPL(md_rdev_init);
/*
* Import a device. If 'super_format' >= 0, then sanity check the superblock
*
return ERR_PTR(-ENOMEM);
}
+ md_rdev_init(rdev);
if ((err = alloc_disk_sb(rdev)))
goto abort_free;
kobject_init(&rdev->kobj, &rdev_ktype);
- rdev->desc_nr = -1;
- rdev->saved_raid_disk = -1;
- rdev->raid_disk = -1;
- rdev->flags = 0;
- rdev->data_offset = 0;
- rdev->sb_events = 0;
- rdev->last_read_error.tv_sec = 0;
- rdev->last_read_error.tv_nsec = 0;
- atomic_set(&rdev->nr_pending, 0);
- atomic_set(&rdev->read_errors, 0);
- atomic_set(&rdev->corrected_errors, 0);
-
size = rdev->bdev->bd_inode->i_size >> BLOCK_SIZE_BITS;
if (!size) {
printk(KERN_WARNING
}
}
- INIT_LIST_HEAD(&rdev->same_set);
- init_waitqueue_head(&rdev->blocked_wait);
-
return rdev;
abort_free:
* - new personality will access other array.
*/
- if (mddev->sync_thread || mddev->reshape_position != MaxSector)
+ if (mddev->sync_thread ||
+ mddev->reshape_position != MaxSector ||
+ mddev->sysfs_active)
return -EBUSY;
if (!mddev->pers->quiesce) {
if (err)
return err;
else {
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
return len;
}
}
}
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
- sysfs_notify_dirent(mddev->sysfs_action);
+ sysfs_notify_dirent_safe(mddev->sysfs_action);
return len;
}
disk->disk_name);
error = 0;
}
- if (sysfs_create_group(&mddev->kobj, &md_bitmap_group))
+ if (mddev->kobj.sd &&
+ sysfs_create_group(&mddev->kobj, &md_bitmap_group))
printk(KERN_DEBUG "pointless warning\n");
abort:
mutex_unlock(&disks_mutex);
- if (!error) {
+ if (!error && mddev->kobj.sd) {
kobject_uevent(&mddev->kobj, KOBJ_ADD);
- mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, NULL, "array_state");
+ mddev->sysfs_state = sysfs_get_dirent_safe(mddev->kobj.sd, "array_state");
}
mddev_put(mddev);
return error;
if (!atomic_read(&mddev->writes_pending)) {
mddev->safemode = 1;
if (mddev->external)
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
}
md_wakeup_thread(mddev->thread);
}
static int start_dirty_degraded;
-static int md_run(mddev_t *mddev)
+int md_run(mddev_t *mddev)
{
int err;
mdk_rdev_t *rdev;
if (mddev->pers)
return -EBUSY;
-
- /* These two calls synchronise us with the
- * sysfs_remove_group calls in mddev_unlock,
- * so they must have completed.
- */
- mutex_lock(&mddev->open_mutex);
- mutex_unlock(&mddev->open_mutex);
+ /* Cannot run until previous stop completes properly */
+ if (mddev->sysfs_active)
+ return -EBUSY;
/*
* Analyze all RAID superblock(s)
return -EINVAL;
}
}
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
}
spin_lock(&pers_lock);
return err;
}
if (mddev->pers->sync_request) {
- if (sysfs_create_group(&mddev->kobj, &md_redundancy_group))
+ if (mddev->kobj.sd &&
+ sysfs_create_group(&mddev->kobj, &md_redundancy_group))
printk(KERN_WARNING
"md: cannot register extra attributes for %s\n",
mdname(mddev));
- mddev->sysfs_action = sysfs_get_dirent(mddev->kobj.sd, NULL, "sync_action");
+ mddev->sysfs_action = sysfs_get_dirent_safe(mddev->kobj.sd, "sync_action");
} else if (mddev->ro == 2) /* auto-readonly not meaningful */
mddev->ro = 0;
char nm[20];
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj, &rdev->kobj, nm))
- printk("md: cannot register %s for %s\n",
- nm, mdname(mddev));
+ /* failure here is OK */;
}
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
md_new_event(mddev);
- sysfs_notify_dirent(mddev->sysfs_state);
- if (mddev->sysfs_action)
- sysfs_notify_dirent(mddev->sysfs_action);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_action);
sysfs_notify(&mddev->kobj, NULL, "degraded");
return 0;
}
+EXPORT_SYMBOL_GPL(md_run);
static int do_md_run(mddev_t *mddev)
{
err = md_run(mddev);
if (err)
goto out;
-
+ err = bitmap_load(mddev);
+ if (err) {
+ bitmap_destroy(mddev);
+ goto out;
+ }
set_capacity(mddev->gendisk, mddev->array_sectors);
revalidate_disk(mddev->gendisk);
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
md_wakeup_thread(mddev->sync_thread);
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
return 0;
}
mddev->bitmap_info.chunksize = 0;
mddev->bitmap_info.daemon_sleep = 0;
mddev->bitmap_info.max_write_behind = 0;
+ mddev->plug = NULL;
}
-static void md_stop_writes(mddev_t *mddev)
+void md_stop_writes(mddev_t *mddev)
{
if (mddev->sync_thread) {
set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
md_update_sb(mddev, 1);
}
}
+EXPORT_SYMBOL_GPL(md_stop_writes);
-static void md_stop(mddev_t *mddev)
+void md_stop(mddev_t *mddev)
{
- md_stop_writes(mddev);
-
mddev->pers->stop(mddev);
if (mddev->pers->sync_request && mddev->to_remove == NULL)
mddev->to_remove = &md_redundancy_group;
mddev->pers = NULL;
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
+EXPORT_SYMBOL_GPL(md_stop);
static int md_set_readonly(mddev_t *mddev, int is_open)
{
mddev->ro = 1;
set_disk_ro(mddev->gendisk, 1);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
err = 0;
}
out:
*/
static int do_md_stop(mddev_t * mddev, int mode, int is_open)
{
- int err = 0;
struct gendisk *disk = mddev->gendisk;
mdk_rdev_t *rdev;
mutex_lock(&mddev->open_mutex);
- if (atomic_read(&mddev->openers) > is_open) {
+ if (atomic_read(&mddev->openers) > is_open ||
+ mddev->sysfs_active) {
printk("md: %s still in use.\n",mdname(mddev));
- err = -EBUSY;
- } else if (mddev->pers) {
+ mutex_unlock(&mddev->open_mutex);
+ return -EBUSY;
+ }
+ if (mddev->pers) {
if (mddev->ro)
set_disk_ro(disk, 0);
+ md_stop_writes(mddev);
md_stop(mddev);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->unplug_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
/* tell userspace to handle 'inactive' */
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0) {
}
set_capacity(disk, 0);
+ mutex_unlock(&mddev->open_mutex);
revalidate_disk(disk);
if (mddev->ro)
mddev->ro = 0;
-
- err = 0;
- }
- mutex_unlock(&mddev->open_mutex);
- if (err)
- return err;
+ } else
+ mutex_unlock(&mddev->open_mutex);
/*
* Free resources if final stop
*/
if (mode == 0) {
-
printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
bitmap_destroy(mddev);
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
if (mddev->hold_active == UNTIL_STOP)
mddev->hold_active = 0;
-
}
- err = 0;
blk_integrity_unregister(disk);
md_new_event(mddev);
- sysfs_notify_dirent(mddev->sysfs_state);
- return err;
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
+ return 0;
}
#ifndef MODULE
if (err)
export_rdev(rdev);
else
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
md_update_sb(mddev, 1);
if (mddev->degraded)
err = 0;
if (mddev->pers) {
mddev->pers->quiesce(mddev, 1);
- if (fd >= 0)
+ if (fd >= 0) {
err = bitmap_create(mddev);
+ if (!err)
+ err = bitmap_load(mddev);
+ }
if (fd < 0 || err) {
bitmap_destroy(mddev);
fd = -1; /* make sure to put the file */
mddev->bitmap_info.default_offset;
mddev->pers->quiesce(mddev, 1);
rv = bitmap_create(mddev);
+ if (!rv)
+ rv = bitmap_load(mddev);
if (rv)
bitmap_destroy(mddev);
mddev->pers->quiesce(mddev, 0);
if (_IOC_TYPE(cmd) == MD_MAJOR && mddev->ro && mddev->pers) {
if (mddev->ro == 2) {
mddev->ro = 0;
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
} else {
mddev_t *mddev = mddev_find(bdev->bd_dev);
int err;
+ lock_kernel();
if (mddev->gendisk != bdev->bd_disk) {
/* we are racing with mddev_put which is discarding this
* bd_disk.
/* Wait until bdev->bd_disk is definitely gone */
flush_scheduled_work();
/* Then retry the open from the top */
+ unlock_kernel();
return -ERESTARTSYS;
}
BUG_ON(mddev != bdev->bd_disk->private_data);
check_disk_size_change(mddev->gendisk, bdev);
out:
+ unlock_kernel();
return err;
}
mddev_t *mddev = disk->private_data;
BUG_ON(!mddev);
+ lock_kernel();
atomic_dec(&mddev->openers);
mddev_put(mddev);
+ unlock_kernel();
return 0;
}
mddev->pers->error_handler(mddev,rdev);
if (mddev->degraded)
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
+ if (mddev->event_work.func)
+ schedule_work(&mddev->event_work);
md_new_event_inintr(mddev);
}
spin_unlock_irq(&mddev->write_lock);
}
if (did_change)
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
wait_event(mddev->sb_wait,
!test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
!test_bit(MD_CHANGE_PENDING, &mddev->flags));
mddev->safemode = 1;
spin_unlock_irq(&mddev->write_lock);
md_update_sb(mddev, 0);
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
} else
spin_unlock_irq(&mddev->write_lock);
}
EXPORT_SYMBOL_GPL(md_allow_write);
+void md_unplug(mddev_t *mddev)
+{
+ if (mddev->queue)
+ blk_unplug(mddev->queue);
+ if (mddev->plug)
+ mddev->plug->unplug_fn(mddev->plug);
+}
+
#define SYNC_MARKS 10
#define SYNC_MARK_STEP (3*HZ)
void md_do_sync(mddev_t *mddev)
>= mddev->resync_max - mddev->curr_resync_completed
)) {
/* time to update curr_resync_completed */
- blk_unplug(mddev->queue);
+ md_unplug(mddev);
wait_event(mddev->recovery_wait,
atomic_read(&mddev->recovery_active) == 0);
mddev->curr_resync_completed =
mddev->curr_resync;
- set_bit(MD_CHANGE_CLEAN, &mddev->flags);
+ if (mddev->persistent)
+ set_bit(MD_CHANGE_CLEAN, &mddev->flags);
sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
* about not overloading the IO subsystem. (things like an
* e2fsck being done on the RAID array should execute fast)
*/
- blk_unplug(mddev->queue);
+ md_unplug(mddev);
cond_resched();
currspeed = ((unsigned long)(io_sectors-mddev->resync_mark_cnt))/2
* this also signals 'finished resyncing' to md_stop
*/
out:
- blk_unplug(mddev->queue);
+ md_unplug(mddev);
wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active));
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj,
&rdev->kobj, nm))
- printk(KERN_WARNING
- "md: cannot register "
- "%s for %s\n",
- nm, mdname(mddev));
+ /* failure here is OK */;
spares++;
md_new_event(mddev);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
mddev->safemode = 0;
spin_unlock_irq(&mddev->write_lock);
if (did_change)
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
}
if (mddev->flags)
mddev->recovery = 0;
/* flag recovery needed just to double check */
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
- sysfs_notify_dirent(mddev->sysfs_action);
+ sysfs_notify_dirent_safe(mddev->sysfs_action);
md_new_event(mddev);
goto unlock;
}
mddev->recovery = 0;
} else
md_wakeup_thread(mddev->sync_thread);
- sysfs_notify_dirent(mddev->sysfs_action);
+ sysfs_notify_dirent_safe(mddev->sysfs_action);
md_new_event(mddev);
}
unlock:
if (test_and_clear_bit(MD_RECOVERY_RECOVER,
&mddev->recovery))
if (mddev->sysfs_action)
- sysfs_notify_dirent(mddev->sysfs_action);
+ sysfs_notify_dirent_safe(mddev->sysfs_action);
}
mddev_unlock(mddev);
}
void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
{
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
wait_event_timeout(rdev->blocked_wait,
!test_bit(Blocked, &rdev->flags),
msecs_to_jiffies(5000));
typedef struct mddev_s mddev_t;
typedef struct mdk_rdev_s mdk_rdev_t;
+/* generic plugging support - like that provided with request_queue,
+ * but does not require a request_queue
+ */
+struct plug_handle {
+ void (*unplug_fn)(struct plug_handle *);
+ struct timer_list unplug_timer;
+ struct work_struct unplug_work;
+ unsigned long unplug_flag;
+};
+#define PLUGGED_FLAG 1
+void plugger_init(struct plug_handle *plug,
+ void (*unplug_fn)(struct plug_handle *));
+void plugger_set_plug(struct plug_handle *plug);
+int plugger_remove_plug(struct plug_handle *plug);
+static inline void plugger_flush(struct plug_handle *plug)
+{
+ del_timer_sync(&plug->unplug_timer);
+ cancel_work_sync(&plug->unplug_work);
+}
+
/*
* MD's 'extended' device
*/
#define Faulty 1 /* device is known to have a fault */
#define In_sync 2 /* device is in_sync with rest of array */
#define WriteMostly 4 /* Avoid reading if at all possible */
-#define BarriersNotsupp 5 /* BIO_RW_BARRIER is not supported */
+#define BarriersNotsupp 5 /* REQ_HARDBARRIER is not supported */
#define AllReserved 6 /* If whole device is reserved for
* one array */
#define AutoDetected 7 /* added by auto-detect */
int suspended;
atomic_t active_io;
int ro;
+ int sysfs_active; /* set when sysfs deletes
+ * are happening, so run/
+ * takeover/stop are not safe
+ */
struct gendisk *gendisk;
* fails. Only supported
*/
struct bio *biolist; /* bios that need to be retried
- * because BIO_RW_BARRIER is not supported
+ * because REQ_HARDBARRIER is not supported
*/
atomic_t recovery_active; /* blocks scheduled, but not written */
* hot-adding a bitmap. It should
* eventually be settable by sysfs.
*/
+ /* When md is serving under dm, it might use a
+ * dirty_log to store the bits.
+ */
+ struct dm_dirty_log *log;
+
struct mutex mutex;
unsigned long chunksize;
- unsigned long daemon_sleep; /* how many seconds between updates? */
+ unsigned long daemon_sleep; /* how many jiffies between updates? */
unsigned long max_write_behind; /* write-behind mode */
int external;
} bitmap_info;
struct list_head all_mddevs;
struct attribute_group *to_remove;
+ struct plug_handle *plug; /* if used by personality */
+
/* Generic barrier handling.
* If there is a pending barrier request, all other
* writes are blocked while the devices are flushed.
struct bio *barrier;
atomic_t flush_pending;
struct work_struct barrier_work;
+ struct work_struct event_work; /* used by dm to report failure event */
};
};
extern struct attribute_group md_bitmap_group;
+static inline struct sysfs_dirent *sysfs_get_dirent_safe(struct sysfs_dirent *sd, char *name)
+{
+ if (sd)
+ return sysfs_get_dirent(sd, NULL, name);
+ return sd;
+}
+static inline void sysfs_notify_dirent_safe(struct sysfs_dirent *sd)
+{
+ if (sd)
+ sysfs_notify_dirent(sd);
+}
+
static inline char * mdname (mddev_t * mddev)
{
return mddev->gendisk ? mddev->gendisk->disk_name : "mdX";
extern void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
extern int strict_strtoul_scaled(const char *cp, unsigned long *res, int scale);
extern void restore_bitmap_write_access(struct file *file);
+extern void md_unplug(mddev_t *mddev);
+
+extern void mddev_init(mddev_t *mddev);
+extern int md_run(mddev_t *mddev);
+extern void md_stop(mddev_t *mddev);
+extern void md_stop_writes(mddev_t *mddev);
+extern void md_rdev_init(mdk_rdev_t *rdev);
+extern void mddev_suspend(mddev_t *mddev);
+extern void mddev_resume(mddev_t *mddev);
#endif /* _MD_MD_H */
+++ /dev/null
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- * Copyright 2002-2007 H. Peter Anvin - All Rights Reserved
- *
- * This file is part of the Linux kernel, and is made available under
- * the terms of the GNU General Public License version 2 or (at your
- * option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * mktables.c
- *
- * Make RAID-6 tables. This is a host user space program to be run at
- * compile time.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <inttypes.h>
-#include <stdlib.h>
-#include <time.h>
-
-static uint8_t gfmul(uint8_t a, uint8_t b)
-{
- uint8_t v = 0;
-
- while (b) {
- if (b & 1)
- v ^= a;
- a = (a << 1) ^ (a & 0x80 ? 0x1d : 0);
- b >>= 1;
- }
-
- return v;
-}
-
-static uint8_t gfpow(uint8_t a, int b)
-{
- uint8_t v = 1;
-
- b %= 255;
- if (b < 0)
- b += 255;
-
- while (b) {
- if (b & 1)
- v = gfmul(v, a);
- a = gfmul(a, a);
- b >>= 1;
- }
-
- return v;
-}
-
-int main(int argc, char *argv[])
-{
- int i, j, k;
- uint8_t v;
- uint8_t exptbl[256], invtbl[256];
-
- printf("#include <linux/raid/pq.h>\n");
-
- /* Compute multiplication table */
- printf("\nconst u8 __attribute__((aligned(256)))\n"
- "raid6_gfmul[256][256] =\n"
- "{\n");
- for (i = 0; i < 256; i++) {
- printf("\t{\n");
- for (j = 0; j < 256; j += 8) {
- printf("\t\t");
- for (k = 0; k < 8; k++)
- printf("0x%02x,%c", gfmul(i, j + k),
- (k == 7) ? '\n' : ' ');
- }
- printf("\t},\n");
- }
- printf("};\n");
- printf("#ifdef __KERNEL__\n");
- printf("EXPORT_SYMBOL(raid6_gfmul);\n");
- printf("#endif\n");
-
- /* Compute power-of-2 table (exponent) */
- v = 1;
- printf("\nconst u8 __attribute__((aligned(256)))\n"
- "raid6_gfexp[256] =\n" "{\n");
- for (i = 0; i < 256; i += 8) {
- printf("\t");
- for (j = 0; j < 8; j++) {
- exptbl[i + j] = v;
- printf("0x%02x,%c", v, (j == 7) ? '\n' : ' ');
- v = gfmul(v, 2);
- if (v == 1)
- v = 0; /* For entry 255, not a real entry */
- }
- }
- printf("};\n");
- printf("#ifdef __KERNEL__\n");
- printf("EXPORT_SYMBOL(raid6_gfexp);\n");
- printf("#endif\n");
-
- /* Compute inverse table x^-1 == x^254 */
- printf("\nconst u8 __attribute__((aligned(256)))\n"
- "raid6_gfinv[256] =\n" "{\n");
- for (i = 0; i < 256; i += 8) {
- printf("\t");
- for (j = 0; j < 8; j++) {
- invtbl[i + j] = v = gfpow(i + j, 254);
- printf("0x%02x,%c", v, (j == 7) ? '\n' : ' ');
- }
- }
- printf("};\n");
- printf("#ifdef __KERNEL__\n");
- printf("EXPORT_SYMBOL(raid6_gfinv);\n");
- printf("#endif\n");
-
- /* Compute inv(2^x + 1) (exponent-xor-inverse) table */
- printf("\nconst u8 __attribute__((aligned(256)))\n"
- "raid6_gfexi[256] =\n" "{\n");
- for (i = 0; i < 256; i += 8) {
- printf("\t");
- for (j = 0; j < 8; j++)
- printf("0x%02x,%c", invtbl[exptbl[i + j] ^ 1],
- (j == 7) ? '\n' : ' ');
- }
- printf("};\n");
- printf("#ifdef __KERNEL__\n");
- printf("EXPORT_SYMBOL(raid6_gfexi);\n");
- printf("#endif\n");
-
- return 0;
-}
if (uptodate)
multipath_end_bh_io(mp_bh, 0);
- else if (!bio_rw_flagged(bio, BIO_RW_AHEAD)) {
+ else if (!(bio->bi_rw & REQ_RAHEAD)) {
/*
* oops, IO error:
*/
struct multipath_bh * mp_bh;
struct multipath_info *multipath;
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) {
md_barrier_request(mddev, bio);
return 0;
}
mp_bh->bio = *bio;
mp_bh->bio.bi_sector += multipath->rdev->data_offset;
mp_bh->bio.bi_bdev = multipath->rdev->bdev;
- mp_bh->bio.bi_rw |= (1 << BIO_RW_FAILFAST_TRANSPORT);
+ mp_bh->bio.bi_rw |= REQ_FAILFAST_TRANSPORT;
mp_bh->bio.bi_end_io = multipath_end_request;
mp_bh->bio.bi_private = mp_bh;
generic_make_request(&mp_bh->bio);
*bio = *(mp_bh->master_bio);
bio->bi_sector += conf->multipaths[mp_bh->path].rdev->data_offset;
bio->bi_bdev = conf->multipaths[mp_bh->path].rdev->bdev;
- bio->bi_rw |= (1 << BIO_RW_FAILFAST_TRANSPORT);
+ bio->bi_rw |= REQ_FAILFAST_TRANSPORT;
bio->bi_end_io = multipath_end_request;
bio->bi_private = mp_bh;
generic_make_request(bio);
struct strip_zone *zone;
mdk_rdev_t *tmp_dev;
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) {
md_barrier_request(mddev, bio);
return 0;
}
struct bio_list bl;
struct page **behind_pages = NULL;
const int rw = bio_data_dir(bio);
- const bool do_sync = bio_rw_flagged(bio, BIO_RW_SYNCIO);
- bool do_barriers;
+ const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
+ unsigned long do_barriers;
mdk_rdev_t *blocked_rdev;
/*
finish_wait(&conf->wait_barrier, &w);
}
if (unlikely(!mddev->barriers_work &&
- bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ (bio->bi_rw & REQ_HARDBARRIER))) {
if (rw == WRITE)
md_write_end(mddev);
bio_endio(bio, -EOPNOTSUPP);
read_bio->bi_sector = r1_bio->sector + mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid1_end_read_request;
- read_bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
+ read_bio->bi_rw = READ | do_sync;
read_bio->bi_private = r1_bio;
generic_make_request(read_bio);
atomic_set(&r1_bio->remaining, 0);
atomic_set(&r1_bio->behind_remaining, 0);
- do_barriers = bio_rw_flagged(bio, BIO_RW_BARRIER);
+ do_barriers = bio->bi_rw & REQ_HARDBARRIER;
if (do_barriers)
set_bit(R1BIO_Barrier, &r1_bio->state);
mbio->bi_sector = r1_bio->sector + conf->mirrors[i].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[i].rdev->bdev;
mbio->bi_end_io = raid1_end_write_request;
- mbio->bi_rw = WRITE | (do_barriers << BIO_RW_BARRIER) |
- (do_sync << BIO_RW_SYNCIO);
+ mbio->bi_rw = WRITE | do_barriers | do_sync;
mbio->bi_private = r1_bio;
if (behind_pages) {
{
int i;
conf_t *conf = mddev->private;
+ int count = 0;
+ unsigned long flags;
/*
* Find all failed disks within the RAID1 configuration
if (rdev
&& !test_bit(Faulty, &rdev->flags)
&& !test_and_set_bit(In_sync, &rdev->flags)) {
- unsigned long flags;
- spin_lock_irqsave(&conf->device_lock, flags);
- mddev->degraded--;
- spin_unlock_irqrestore(&conf->device_lock, flags);
+ count++;
+ sysfs_notify_dirent(rdev->sysfs_state);
}
}
+ spin_lock_irqsave(&conf->device_lock, flags);
+ mddev->degraded -= count;
+ spin_unlock_irqrestore(&conf->device_lock, flags);
print_conf(conf);
- return 0;
+ return count;
}
sync_request_write(mddev, r1_bio);
unplug = 1;
} else if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) {
- /* some requests in the r1bio were BIO_RW_BARRIER
+ /* some requests in the r1bio were REQ_HARDBARRIER
* requests which failed with -EOPNOTSUPP. Hohumm..
* Better resubmit without the barrier.
* We know which devices to resubmit for, because
* We already have a nr_pending reference on these rdevs.
*/
int i;
- const bool do_sync = bio_rw_flagged(r1_bio->master_bio, BIO_RW_SYNCIO);
+ const unsigned long do_sync = (r1_bio->master_bio->bi_rw & REQ_SYNC);
clear_bit(R1BIO_BarrierRetry, &r1_bio->state);
clear_bit(R1BIO_Barrier, &r1_bio->state);
for (i=0; i < conf->raid_disks; i++)
conf->mirrors[i].rdev->data_offset;
bio->bi_bdev = conf->mirrors[i].rdev->bdev;
bio->bi_end_io = raid1_end_write_request;
- bio->bi_rw = WRITE |
- (do_sync << BIO_RW_SYNCIO);
+ bio->bi_rw = WRITE | do_sync;
bio->bi_private = r1_bio;
r1_bio->bios[i] = bio;
generic_make_request(bio);
(unsigned long long)r1_bio->sector);
raid_end_bio_io(r1_bio);
} else {
- const bool do_sync = bio_rw_flagged(r1_bio->master_bio, BIO_RW_SYNCIO);
+ const unsigned long do_sync = r1_bio->master_bio->bi_rw & REQ_SYNC;
r1_bio->bios[r1_bio->read_disk] =
mddev->ro ? IO_BLOCKED : NULL;
r1_bio->read_disk = disk;
bio->bi_sector = r1_bio->sector + rdev->data_offset;
bio->bi_bdev = rdev->bdev;
bio->bi_end_io = raid1_end_read_request;
- bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
+ bio->bi_rw = READ | do_sync;
bio->bi_private = r1_bio;
unplug = 1;
generic_make_request(bio);
int i;
int chunk_sects = conf->chunk_mask + 1;
const int rw = bio_data_dir(bio);
- const bool do_sync = bio_rw_flagged(bio, BIO_RW_SYNCIO);
+ const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
struct bio_list bl;
unsigned long flags;
mdk_rdev_t *blocked_rdev;
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) {
md_barrier_request(mddev, bio);
return 0;
}
*/
bp = bio_split(bio,
chunk_sects - (bio->bi_sector & (chunk_sects - 1)) );
+
+ /* Each of these 'make_request' calls will call 'wait_barrier'.
+ * If the first succeeds but the second blocks due to the resync
+ * thread raising the barrier, we will deadlock because the
+ * IO to the underlying device will be queued in generic_make_request
+ * and will never complete, so will never reduce nr_pending.
+ * So increment nr_waiting here so no new raise_barriers will
+ * succeed, and so the second wait_barrier cannot block.
+ */
+ spin_lock_irq(&conf->resync_lock);
+ conf->nr_waiting++;
+ spin_unlock_irq(&conf->resync_lock);
+
if (make_request(mddev, &bp->bio1))
generic_make_request(&bp->bio1);
if (make_request(mddev, &bp->bio2))
generic_make_request(&bp->bio2);
+ spin_lock_irq(&conf->resync_lock);
+ conf->nr_waiting--;
+ wake_up(&conf->wait_barrier);
+ spin_unlock_irq(&conf->resync_lock);
+
bio_pair_release(bp);
return 0;
bad_map:
mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid10_end_read_request;
- read_bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
+ read_bio->bi_rw = READ | do_sync;
read_bio->bi_private = r10_bio;
generic_make_request(read_bio);
conf->mirrors[d].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | (do_sync << BIO_RW_SYNCIO);
+ mbio->bi_rw = WRITE | do_sync;
mbio->bi_private = r10_bio;
atomic_inc(&r10_bio->remaining);
int i;
conf_t *conf = mddev->private;
mirror_info_t *tmp;
+ int count = 0;
+ unsigned long flags;
/*
* Find all non-in_sync disks within the RAID10 configuration
if (tmp->rdev
&& !test_bit(Faulty, &tmp->rdev->flags)
&& !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
- unsigned long flags;
- spin_lock_irqsave(&conf->device_lock, flags);
- mddev->degraded--;
- spin_unlock_irqrestore(&conf->device_lock, flags);
+ count++;
+ sysfs_notify_dirent(tmp->rdev->sysfs_state);
}
}
+ spin_lock_irqsave(&conf->device_lock, flags);
+ mddev->degraded -= count;
+ spin_unlock_irqrestore(&conf->device_lock, flags);
print_conf(conf);
- return 0;
+ return count;
}
raid_end_bio_io(r10_bio);
bio_put(bio);
} else {
- const bool do_sync = bio_rw_flagged(r10_bio->master_bio, BIO_RW_SYNCIO);
+ const unsigned long do_sync = (r10_bio->master_bio->bi_rw & REQ_SYNC);
bio_put(bio);
rdev = conf->mirrors[mirror].rdev;
if (printk_ratelimit())
bio->bi_sector = r10_bio->devs[r10_bio->read_slot].addr
+ rdev->data_offset;
bio->bi_bdev = rdev->bdev;
- bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
+ bio->bi_rw = READ | do_sync;
bio->bi_private = r10_bio;
bio->bi_end_io = raid10_end_read_request;
unplug = 1;
if (test_bit(STRIPE_HANDLE, &sh->state)) {
if (test_bit(STRIPE_DELAYED, &sh->state)) {
list_add_tail(&sh->lru, &conf->delayed_list);
- blk_plug_device(conf->mddev->queue);
+ plugger_set_plug(&conf->plug);
} else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
sh->bm_seq - conf->seq_write > 0) {
list_add_tail(&sh->lru, &conf->bitmap_list);
- blk_plug_device(conf->mddev->queue);
+ plugger_set_plug(&conf->plug);
} else {
clear_bit(STRIPE_BIT_DELAY, &sh->state);
list_add_tail(&sh->lru, &conf->handle_list);
}
static void unplug_slaves(mddev_t *mddev);
-static void raid5_unplug_device(struct request_queue *q);
static struct stripe_head *
get_active_stripe(raid5_conf_t *conf, sector_t sector,
< (conf->max_nr_stripes *3/4)
|| !conf->inactive_blocked),
conf->device_lock,
- raid5_unplug_device(conf->mddev->queue)
+ md_raid5_unplug_device(conf)
);
conf->inactive_blocked = 0;
} else
struct kmem_cache *sc;
int devs = max(conf->raid_disks, conf->previous_raid_disks);
- sprintf(conf->cache_name[0],
- "raid%d-%s", conf->level, mdname(conf->mddev));
- sprintf(conf->cache_name[1],
- "raid%d-%s-alt", conf->level, mdname(conf->mddev));
+ if (conf->mddev->gendisk)
+ sprintf(conf->cache_name[0],
+ "raid%d-%s", conf->level, mdname(conf->mddev));
+ else
+ sprintf(conf->cache_name[0],
+ "raid%d-%p", conf->level, conf->mddev);
+ sprintf(conf->cache_name[1], "%s-alt", conf->cache_name[0]);
+
conf->active_name = 0;
sc = kmem_cache_create(conf->cache_name[conf->active_name],
sizeof(struct stripe_head)+(devs-1)*sizeof(struct r5dev),
list_add_tail(&sh->lru, &conf->hold_list);
}
} else
- blk_plug_device(conf->mddev->queue);
+ plugger_set_plug(&conf->plug);
}
static void activate_bit_delay(raid5_conf_t *conf)
rcu_read_unlock();
}
-static void raid5_unplug_device(struct request_queue *q)
+void md_raid5_unplug_device(raid5_conf_t *conf)
{
- mddev_t *mddev = q->queuedata;
- raid5_conf_t *conf = mddev->private;
unsigned long flags;
spin_lock_irqsave(&conf->device_lock, flags);
- if (blk_remove_plug(q)) {
+ if (plugger_remove_plug(&conf->plug)) {
conf->seq_flush++;
raid5_activate_delayed(conf);
}
- md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(conf->mddev->thread);
spin_unlock_irqrestore(&conf->device_lock, flags);
- unplug_slaves(mddev);
+ unplug_slaves(conf->mddev);
}
+EXPORT_SYMBOL_GPL(md_raid5_unplug_device);
-static int raid5_congested(void *data, int bits)
+static void raid5_unplug(struct plug_handle *plug)
+{
+ raid5_conf_t *conf = container_of(plug, raid5_conf_t, plug);
+ md_raid5_unplug_device(conf);
+}
+
+static void raid5_unplug_queue(struct request_queue *q)
+{
+ mddev_t *mddev = q->queuedata;
+ md_raid5_unplug_device(mddev->private);
+}
+
+int md_raid5_congested(mddev_t *mddev, int bits)
{
- mddev_t *mddev = data;
raid5_conf_t *conf = mddev->private;
/* No difference between reads and writes. Just check
* how busy the stripe_cache is
*/
- if (mddev_congested(mddev, bits))
- return 1;
if (conf->inactive_blocked)
return 1;
if (conf->quiesce)
return 0;
}
+EXPORT_SYMBOL_GPL(md_raid5_congested);
+
+static int raid5_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+
+ return mddev_congested(mddev, bits) ||
+ md_raid5_congested(mddev, bits);
+}
/* We want read requests to align with chunks where possible,
* but write requests don't need to.
const int rw = bio_data_dir(bi);
int remaining;
- if (unlikely(bio_rw_flagged(bi, BIO_RW_BARRIER))) {
+ if (unlikely(bi->bi_rw & REQ_HARDBARRIER)) {
/* Drain all pending writes. We only really need
* to ensure they have been submitted, but this is
* easier.
* add failed due to overlap. Flush everything
* and wait a while
*/
- raid5_unplug_device(mddev->queue);
+ md_raid5_unplug_device(conf);
release_stripe(sh);
schedule();
goto retry;
return 0;
}
-static ssize_t
-raid5_store_stripe_cache_size(mddev_t *mddev, const char *page, size_t len)
+int
+raid5_set_cache_size(mddev_t *mddev, int size)
{
raid5_conf_t *conf = mddev->private;
- unsigned long new;
int err;
- if (len >= PAGE_SIZE)
+ if (size <= 16 || size > 32768)
return -EINVAL;
- if (!conf)
- return -ENODEV;
-
- if (strict_strtoul(page, 10, &new))
- return -EINVAL;
- if (new <= 16 || new > 32768)
- return -EINVAL;
- while (new < conf->max_nr_stripes) {
+ while (size < conf->max_nr_stripes) {
if (drop_one_stripe(conf))
conf->max_nr_stripes--;
else
err = md_allow_write(mddev);
if (err)
return err;
- while (new > conf->max_nr_stripes) {
+ while (size > conf->max_nr_stripes) {
if (grow_one_stripe(conf))
conf->max_nr_stripes++;
else break;
}
+ return 0;
+}
+EXPORT_SYMBOL(raid5_set_cache_size);
+
+static ssize_t
+raid5_store_stripe_cache_size(mddev_t *mddev, const char *page, size_t len)
+{
+ raid5_conf_t *conf = mddev->private;
+ unsigned long new;
+ int err;
+
+ if (len >= PAGE_SIZE)
+ return -EINVAL;
+ if (!conf)
+ return -ENODEV;
+
+ if (strict_strtoul(page, 10, &new))
+ return -EINVAL;
+ err = raid5_set_cache_size(mddev, new);
+ if (err)
+ return err;
return len;
}
static int run(mddev_t *mddev)
{
raid5_conf_t *conf;
- int working_disks = 0, chunk_size;
+ int working_disks = 0;
int dirty_parity_disks = 0;
mdk_rdev_t *rdev;
sector_t reshape_offset = 0;
"reshape");
}
- /* read-ahead size must cover two whole stripes, which is
- * 2 * (datadisks) * chunksize where 'n' is the number of raid devices
- */
- {
- int data_disks = conf->previous_raid_disks - conf->max_degraded;
- int stripe = data_disks *
- ((mddev->chunk_sectors << 9) / PAGE_SIZE);
- if (mddev->queue->backing_dev_info.ra_pages < 2 * stripe)
- mddev->queue->backing_dev_info.ra_pages = 2 * stripe;
- }
/* Ok, everything is just fine now */
if (mddev->to_remove == &raid5_attrs_group)
mddev->to_remove = NULL;
- else if (sysfs_create_group(&mddev->kobj, &raid5_attrs_group))
+ else if (mddev->kobj.sd &&
+ sysfs_create_group(&mddev->kobj, &raid5_attrs_group))
printk(KERN_WARNING
- "md/raid:%s: failed to create sysfs attributes.\n",
+ "raid5: failed to create sysfs attributes for %s\n",
mdname(mddev));
+ md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
- mddev->queue->queue_lock = &conf->device_lock;
+ plugger_init(&conf->plug, raid5_unplug);
+ mddev->plug = &conf->plug;
+ if (mddev->queue) {
+ int chunk_size;
+ /* read-ahead size must cover two whole stripes, which
+ * is 2 * (datadisks) * chunksize where 'n' is the
+ * number of raid devices
+ */
+ int data_disks = conf->previous_raid_disks - conf->max_degraded;
+ int stripe = data_disks *
+ ((mddev->chunk_sectors << 9) / PAGE_SIZE);
+ if (mddev->queue->backing_dev_info.ra_pages < 2 * stripe)
+ mddev->queue->backing_dev_info.ra_pages = 2 * stripe;
- mddev->queue->unplug_fn = raid5_unplug_device;
- mddev->queue->backing_dev_info.congested_data = mddev;
- mddev->queue->backing_dev_info.congested_fn = raid5_congested;
+ blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
- md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
+ mddev->queue->backing_dev_info.congested_data = mddev;
+ mddev->queue->backing_dev_info.congested_fn = raid5_congested;
+ mddev->queue->queue_lock = &conf->device_lock;
+ mddev->queue->unplug_fn = raid5_unplug_queue;
- blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
- chunk_size = mddev->chunk_sectors << 9;
- blk_queue_io_min(mddev->queue, chunk_size);
- blk_queue_io_opt(mddev->queue, chunk_size *
- (conf->raid_disks - conf->max_degraded));
+ chunk_size = mddev->chunk_sectors << 9;
+ blk_queue_io_min(mddev->queue, chunk_size);
+ blk_queue_io_opt(mddev->queue, chunk_size *
+ (conf->raid_disks - conf->max_degraded));
- list_for_each_entry(rdev, &mddev->disks, same_set)
- disk_stack_limits(mddev->gendisk, rdev->bdev,
- rdev->data_offset << 9);
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
+ }
return 0;
abort:
md_unregister_thread(mddev->thread);
mddev->thread = NULL;
- mddev->queue->backing_dev_info.congested_fn = NULL;
- blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
+ if (mddev->queue)
+ mddev->queue->backing_dev_info.congested_fn = NULL;
+ plugger_flush(&conf->plug); /* the unplug fn references 'conf'*/
free_conf(conf);
mddev->private = NULL;
mddev->to_remove = &raid5_attrs_group;
int i;
raid5_conf_t *conf = mddev->private;
struct disk_info *tmp;
+ int count = 0;
+ unsigned long flags;
for (i = 0; i < conf->raid_disks; i++) {
tmp = conf->disks + i;
&& tmp->rdev->recovery_offset == MaxSector
&& !test_bit(Faulty, &tmp->rdev->flags)
&& !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
- unsigned long flags;
- spin_lock_irqsave(&conf->device_lock, flags);
- mddev->degraded--;
- spin_unlock_irqrestore(&conf->device_lock, flags);
+ count++;
+ sysfs_notify_dirent(tmp->rdev->sysfs_state);
}
}
+ spin_lock_irqsave(&conf->device_lock, flags);
+ mddev->degraded -= count;
+ spin_unlock_irqrestore(&conf->device_lock, flags);
print_raid5_conf(conf);
- return 0;
+ return count;
}
static int raid5_remove_disk(mddev_t *mddev, int number)
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj,
&rdev->kobj, nm))
- printk(KERN_WARNING
- "md/raid:%s: failed to create "
- " link %s\n",
- mdname(mddev), nm);
+ /* Failure here is OK */;
} else
break;
}
/* read-ahead size must cover two whole stripes, which is
* 2 * (datadisks) * chunksize where 'n' is the number of raid devices
*/
- {
+ if (conf->mddev->queue) {
int data_disks = conf->raid_disks - conf->max_degraded;
int stripe = data_disks * ((conf->chunk_sectors << 9)
/ PAGE_SIZE);
* two caches.
*/
int active_name;
- char cache_name[2][20];
+ char cache_name[2][32];
struct kmem_cache *slab_cache; /* for allocating stripes */
int seq_flush, seq_write;
* (fresh device added).
* Cleared when a sync completes.
*/
+
+ struct plug_handle plug;
+
/* per cpu variables */
struct raid5_percpu {
struct page *spare_page; /* Used when checking P/Q in raid6 */
{
return layout >= 8 && layout <= 10;
}
+
+extern int md_raid5_congested(mddev_t *mddev, int bits);
+extern void md_raid5_unplug_device(raid5_conf_t *conf);
+extern int raid5_set_cache_size(mddev_t *mddev, int size);
#endif
+++ /dev/null
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- * Copyright 2002 H. Peter Anvin - All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- * Boston MA 02111-1307, USA; either version 2 of the License, or
- * (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6algos.c
- *
- * Algorithm list and algorithm selection for RAID-6
- */
-
-#include <linux/raid/pq.h>
-#include <linux/gfp.h>
-#ifndef __KERNEL__
-#include <sys/mman.h>
-#include <stdio.h>
-#else
-#if !RAID6_USE_EMPTY_ZERO_PAGE
-/* In .bss so it's zeroed */
-const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
-EXPORT_SYMBOL(raid6_empty_zero_page);
-#endif
-#endif
-
-struct raid6_calls raid6_call;
-EXPORT_SYMBOL_GPL(raid6_call);
-
-const struct raid6_calls * const raid6_algos[] = {
- &raid6_intx1,
- &raid6_intx2,
- &raid6_intx4,
- &raid6_intx8,
-#if defined(__ia64__)
- &raid6_intx16,
- &raid6_intx32,
-#endif
-#if defined(__i386__) && !defined(__arch_um__)
- &raid6_mmxx1,
- &raid6_mmxx2,
- &raid6_sse1x1,
- &raid6_sse1x2,
- &raid6_sse2x1,
- &raid6_sse2x2,
-#endif
-#if defined(__x86_64__) && !defined(__arch_um__)
- &raid6_sse2x1,
- &raid6_sse2x2,
- &raid6_sse2x4,
-#endif
-#ifdef CONFIG_ALTIVEC
- &raid6_altivec1,
- &raid6_altivec2,
- &raid6_altivec4,
- &raid6_altivec8,
-#endif
- NULL
-};
-
-#ifdef __KERNEL__
-#define RAID6_TIME_JIFFIES_LG2 4
-#else
-/* Need more time to be stable in userspace */
-#define RAID6_TIME_JIFFIES_LG2 9
-#define time_before(x, y) ((x) < (y))
-#endif
-
-/* Try to pick the best algorithm */
-/* This code uses the gfmul table as convenient data set to abuse */
-
-int __init raid6_select_algo(void)
-{
- const struct raid6_calls * const * algo;
- const struct raid6_calls * best;
- char *syndromes;
- void *dptrs[(65536/PAGE_SIZE)+2];
- int i, disks;
- unsigned long perf, bestperf;
- int bestprefer;
- unsigned long j0, j1;
-
- disks = (65536/PAGE_SIZE)+2;
- for ( i = 0 ; i < disks-2 ; i++ ) {
- dptrs[i] = ((char *)raid6_gfmul) + PAGE_SIZE*i;
- }
-
- /* Normal code - use a 2-page allocation to avoid D$ conflict */
- syndromes = (void *) __get_free_pages(GFP_KERNEL, 1);
-
- if ( !syndromes ) {
- printk("raid6: Yikes! No memory available.\n");
- return -ENOMEM;
- }
-
- dptrs[disks-2] = syndromes;
- dptrs[disks-1] = syndromes + PAGE_SIZE;
-
- bestperf = 0; bestprefer = 0; best = NULL;
-
- for ( algo = raid6_algos ; *algo ; algo++ ) {
- if ( !(*algo)->valid || (*algo)->valid() ) {
- perf = 0;
-
- preempt_disable();
- j0 = jiffies;
- while ( (j1 = jiffies) == j0 )
- cpu_relax();
- while (time_before(jiffies,
- j1 + (1<<RAID6_TIME_JIFFIES_LG2))) {
- (*algo)->gen_syndrome(disks, PAGE_SIZE, dptrs);
- perf++;
- }
- preempt_enable();
-
- if ( (*algo)->prefer > bestprefer ||
- ((*algo)->prefer == bestprefer &&
- perf > bestperf) ) {
- best = *algo;
- bestprefer = best->prefer;
- bestperf = perf;
- }
- printk("raid6: %-8s %5ld MB/s\n", (*algo)->name,
- (perf*HZ) >> (20-16+RAID6_TIME_JIFFIES_LG2));
- }
- }
-
- if (best) {
- printk("raid6: using algorithm %s (%ld MB/s)\n",
- best->name,
- (bestperf*HZ) >> (20-16+RAID6_TIME_JIFFIES_LG2));
- raid6_call = *best;
- } else
- printk("raid6: Yikes! No algorithm found!\n");
-
- free_pages((unsigned long)syndromes, 1);
-
- return best ? 0 : -EINVAL;
-}
-
-static void raid6_exit(void)
-{
- do { } while (0);
-}
-
-subsys_initcall(raid6_select_algo);
-module_exit(raid6_exit);
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("RAID6 Q-syndrome calculations");
+++ /dev/null
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- * Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- * Boston MA 02111-1307, USA; either version 2 of the License, or
- * (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6altivec$#.c
- *
- * $#-way unrolled portable integer math RAID-6 instruction set
- *
- * This file is postprocessed using unroll.awk
- *
- * <benh> hpa: in process,
- * you can just "steal" the vec unit with enable_kernel_altivec() (but
- * bracked this with preempt_disable/enable or in a lock)
- */
-
-#include <linux/raid/pq.h>
-
-#ifdef CONFIG_ALTIVEC
-
-#include <altivec.h>
-#ifdef __KERNEL__
-# include <asm/system.h>
-# include <asm/cputable.h>
-#endif
-
-/*
- * This is the C data type to use. We use a vector of
- * signed char so vec_cmpgt() will generate the right
- * instruction.
- */
-
-typedef vector signed char unative_t;
-
-#define NBYTES(x) ((vector signed char) {x,x,x,x, x,x,x,x, x,x,x,x, x,x,x,x})
-#define NSIZE sizeof(unative_t)
-
-/*
- * The SHLBYTE() operation shifts each byte left by 1, *not*
- * rolling over into the next byte
- */
-static inline __attribute_const__ unative_t SHLBYTE(unative_t v)
-{
- return vec_add(v,v);
-}
-
-/*
- * The MASK() operation returns 0xFF in any byte for which the high
- * bit is 1, 0x00 for any byte for which the high bit is 0.
- */
-static inline __attribute_const__ unative_t MASK(unative_t v)
-{
- unative_t zv = NBYTES(0);
-
- /* vec_cmpgt returns a vector bool char; thus the need for the cast */
- return (unative_t)vec_cmpgt(zv, v);
-}
-
-
-/* This is noinline to make damned sure that gcc doesn't move any of the
- Altivec code around the enable/disable code */
-static void noinline
-raid6_altivec$#_gen_syndrome_real(int disks, size_t bytes, void **ptrs)
-{
- u8 **dptr = (u8 **)ptrs;
- u8 *p, *q;
- int d, z, z0;
-
- unative_t wd$$, wq$$, wp$$, w1$$, w2$$;
- unative_t x1d = NBYTES(0x1d);
-
- z0 = disks - 3; /* Highest data disk */
- p = dptr[z0+1]; /* XOR parity */
- q = dptr[z0+2]; /* RS syndrome */
-
- for ( d = 0 ; d < bytes ; d += NSIZE*$# ) {
- wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE];
- for ( z = z0-1 ; z >= 0 ; z-- ) {
- wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE];
- wp$$ = vec_xor(wp$$, wd$$);
- w2$$ = MASK(wq$$);
- w1$$ = SHLBYTE(wq$$);
- w2$$ = vec_and(w2$$, x1d);
- w1$$ = vec_xor(w1$$, w2$$);
- wq$$ = vec_xor(w1$$, wd$$);
- }
- *(unative_t *)&p[d+NSIZE*$$] = wp$$;
- *(unative_t *)&q[d+NSIZE*$$] = wq$$;
- }
-}
-
-static void raid6_altivec$#_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
- preempt_disable();
- enable_kernel_altivec();
-
- raid6_altivec$#_gen_syndrome_real(disks, bytes, ptrs);
-
- preempt_enable();
-}
-
-int raid6_have_altivec(void);
-#if $# == 1
-int raid6_have_altivec(void)
-{
- /* This assumes either all CPUs have Altivec or none does */
-# ifdef __KERNEL__
- return cpu_has_feature(CPU_FTR_ALTIVEC);
-# else
- return 1;
-# endif
-}
-#endif
-
-const struct raid6_calls raid6_altivec$# = {
- raid6_altivec$#_gen_syndrome,
- raid6_have_altivec,
- "altivecx$#",
- 0
-};
-
-#endif /* CONFIG_ALTIVEC */
+++ /dev/null
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- * Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- * Boston MA 02111-1307, USA; either version 2 of the License, or
- * (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6int$#.c
- *
- * $#-way unrolled portable integer math RAID-6 instruction set
- *
- * This file is postprocessed using unroll.awk
- */
-
-#include <linux/raid/pq.h>
-
-/*
- * This is the C data type to use
- */
-
-/* Change this from BITS_PER_LONG if there is something better... */
-#if BITS_PER_LONG == 64
-# define NBYTES(x) ((x) * 0x0101010101010101UL)
-# define NSIZE 8
-# define NSHIFT 3
-# define NSTRING "64"
-typedef u64 unative_t;
-#else
-# define NBYTES(x) ((x) * 0x01010101U)
-# define NSIZE 4
-# define NSHIFT 2
-# define NSTRING "32"
-typedef u32 unative_t;
-#endif
-
-
-
-/*
- * IA-64 wants insane amounts of unrolling. On other architectures that
- * is just a waste of space.
- */
-#if ($# <= 8) || defined(__ia64__)
-
-
-/*
- * These sub-operations are separate inlines since they can sometimes be
- * specially optimized using architecture-specific hacks.
- */
-
-/*
- * The SHLBYTE() operation shifts each byte left by 1, *not*
- * rolling over into the next byte
- */
-static inline __attribute_const__ unative_t SHLBYTE(unative_t v)
-{
- unative_t vv;
-
- vv = (v << 1) & NBYTES(0xfe);
- return vv;
-}
-
-/*
- * The MASK() operation returns 0xFF in any byte for which the high
- * bit is 1, 0x00 for any byte for which the high bit is 0.
- */
-static inline __attribute_const__ unative_t MASK(unative_t v)
-{
- unative_t vv;
-
- vv = v & NBYTES(0x80);
- vv = (vv << 1) - (vv >> 7); /* Overflow on the top bit is OK */
- return vv;
-}
-
-
-static void raid6_int$#_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
- u8 **dptr = (u8 **)ptrs;
- u8 *p, *q;
- int d, z, z0;
-
- unative_t wd$$, wq$$, wp$$, w1$$, w2$$;
-
- z0 = disks - 3; /* Highest data disk */
- p = dptr[z0+1]; /* XOR parity */
- q = dptr[z0+2]; /* RS syndrome */
-
- for ( d = 0 ; d < bytes ; d += NSIZE*$# ) {
- wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE];
- for ( z = z0-1 ; z >= 0 ; z-- ) {
- wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE];
- wp$$ ^= wd$$;
- w2$$ = MASK(wq$$);
- w1$$ = SHLBYTE(wq$$);
- w2$$ &= NBYTES(0x1d);
- w1$$ ^= w2$$;
- wq$$ = w1$$ ^ wd$$;
- }
- *(unative_t *)&p[d+NSIZE*$$] = wp$$;
- *(unative_t *)&q[d+NSIZE*$$] = wq$$;
- }
-}
-
-const struct raid6_calls raid6_intx$# = {
- raid6_int$#_gen_syndrome,
- NULL, /* always valid */
- "int" NSTRING "x$#",
- 0
-};
-
-#endif
+++ /dev/null
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- * Copyright 2002 H. Peter Anvin - All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- * Boston MA 02111-1307, USA; either version 2 of the License, or
- * (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6mmx.c
- *
- * MMX implementation of RAID-6 syndrome functions
- */
-
-#if defined(__i386__) && !defined(__arch_um__)
-
-#include <linux/raid/pq.h>
-#include "raid6x86.h"
-
-/* Shared with raid6sse1.c */
-const struct raid6_mmx_constants {
- u64 x1d;
-} raid6_mmx_constants = {
- 0x1d1d1d1d1d1d1d1dULL,
-};
-
-static int raid6_have_mmx(void)
-{
- /* Not really "boot_cpu" but "all_cpus" */
- return boot_cpu_has(X86_FEATURE_MMX);
-}
-
-/*
- * Plain MMX implementation
- */
-static void raid6_mmx1_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
- u8 **dptr = (u8 **)ptrs;
- u8 *p, *q;
- int d, z, z0;
-
- z0 = disks - 3; /* Highest data disk */
- p = dptr[z0+1]; /* XOR parity */
- q = dptr[z0+2]; /* RS syndrome */
-
- kernel_fpu_begin();
-
- asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
- asm volatile("pxor %mm5,%mm5"); /* Zero temp */
-
- for ( d = 0 ; d < bytes ; d += 8 ) {
- asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
- asm volatile("movq %mm2,%mm4"); /* Q[0] */
- for ( z = z0-1 ; z >= 0 ; z-- ) {
- asm volatile("movq %0,%%mm6" : : "m" (dptr[z][d]));
- asm volatile("pcmpgtb %mm4,%mm5");
- asm volatile("paddb %mm4,%mm4");
- asm volatile("pand %mm0,%mm5");
- asm volatile("pxor %mm5,%mm4");
- asm volatile("pxor %mm5,%mm5");
- asm volatile("pxor %mm6,%mm2");
- asm volatile("pxor %mm6,%mm4");
- }
- asm volatile("movq %%mm2,%0" : "=m" (p[d]));
- asm volatile("pxor %mm2,%mm2");
- asm volatile("movq %%mm4,%0" : "=m" (q[d]));
- asm volatile("pxor %mm4,%mm4");
- }
-
- kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_mmxx1 = {
- raid6_mmx1_gen_syndrome,
- raid6_have_mmx,
- "mmxx1",
- 0
-};
-
-/*
- * Unrolled-by-2 MMX implementation
- */
-static void raid6_mmx2_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
- u8 **dptr = (u8 **)ptrs;
- u8 *p, *q;
- int d, z, z0;
-
- z0 = disks - 3; /* Highest data disk */
- p = dptr[z0+1]; /* XOR parity */
- q = dptr[z0+2]; /* RS syndrome */
-
- kernel_fpu_begin();
-
- asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
- asm volatile("pxor %mm5,%mm5"); /* Zero temp */
- asm volatile("pxor %mm7,%mm7"); /* Zero temp */
-
- for ( d = 0 ; d < bytes ; d += 16 ) {
- asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
- asm volatile("movq %0,%%mm3" : : "m" (dptr[z0][d+8]));
- asm volatile("movq %mm2,%mm4"); /* Q[0] */
- asm volatile("movq %mm3,%mm6"); /* Q[1] */
- for ( z = z0-1 ; z >= 0 ; z-- ) {
- asm volatile("pcmpgtb %mm4,%mm5");
- asm volatile("pcmpgtb %mm6,%mm7");
- asm volatile("paddb %mm4,%mm4");
- asm volatile("paddb %mm6,%mm6");
- asm volatile("pand %mm0,%mm5");
- asm volatile("pand %mm0,%mm7");
- asm volatile("pxor %mm5,%mm4");
- asm volatile("pxor %mm7,%mm6");
- asm volatile("movq %0,%%mm5" : : "m" (dptr[z][d]));
- asm volatile("movq %0,%%mm7" : : "m" (dptr[z][d+8]));
- asm volatile("pxor %mm5,%mm2");
- asm volatile("pxor %mm7,%mm3");
- asm volatile("pxor %mm5,%mm4");
- asm volatile("pxor %mm7,%mm6");
- asm volatile("pxor %mm5,%mm5");
- asm volatile("pxor %mm7,%mm7");
- }
- asm volatile("movq %%mm2,%0" : "=m" (p[d]));
- asm volatile("movq %%mm3,%0" : "=m" (p[d+8]));
- asm volatile("movq %%mm4,%0" : "=m" (q[d]));
- asm volatile("movq %%mm6,%0" : "=m" (q[d+8]));
- }
-
- kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_mmxx2 = {
- raid6_mmx2_gen_syndrome,
- raid6_have_mmx,
- "mmxx2",
- 0
-};
-
-#endif
+++ /dev/null
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- * Copyright 2002 H. Peter Anvin - All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- * Boston MA 02111-1307, USA; either version 2 of the License, or
- * (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6recov.c
- *
- * RAID-6 data recovery in dual failure mode. In single failure mode,
- * use the RAID-5 algorithm (or, in the case of Q failure, just reconstruct
- * the syndrome.)
- */
-
-#include <linux/raid/pq.h>
-
-/* Recover two failed data blocks. */
-void raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
- void **ptrs)
-{
- u8 *p, *q, *dp, *dq;
- u8 px, qx, db;
- const u8 *pbmul; /* P multiplier table for B data */
- const u8 *qmul; /* Q multiplier table (for both) */
-
- p = (u8 *)ptrs[disks-2];
- q = (u8 *)ptrs[disks-1];
-
- /* Compute syndrome with zero for the missing data pages
- Use the dead data pages as temporary storage for
- delta p and delta q */
- dp = (u8 *)ptrs[faila];
- ptrs[faila] = (void *)raid6_empty_zero_page;
- ptrs[disks-2] = dp;
- dq = (u8 *)ptrs[failb];
- ptrs[failb] = (void *)raid6_empty_zero_page;
- ptrs[disks-1] = dq;
-
- raid6_call.gen_syndrome(disks, bytes, ptrs);
-
- /* Restore pointer table */
- ptrs[faila] = dp;
- ptrs[failb] = dq;
- ptrs[disks-2] = p;
- ptrs[disks-1] = q;
-
- /* Now, pick the proper data tables */
- pbmul = raid6_gfmul[raid6_gfexi[failb-faila]];
- qmul = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]]];
-
- /* Now do it... */
- while ( bytes-- ) {
- px = *p ^ *dp;
- qx = qmul[*q ^ *dq];
- *dq++ = db = pbmul[px] ^ qx; /* Reconstructed B */
- *dp++ = db ^ px; /* Reconstructed A */
- p++; q++;
- }
-}
-EXPORT_SYMBOL_GPL(raid6_2data_recov);
-
-/* Recover failure of one data block plus the P block */
-void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs)
-{
- u8 *p, *q, *dq;
- const u8 *qmul; /* Q multiplier table */
-
- p = (u8 *)ptrs[disks-2];
- q = (u8 *)ptrs[disks-1];
-
- /* Compute syndrome with zero for the missing data page
- Use the dead data page as temporary storage for delta q */
- dq = (u8 *)ptrs[faila];
- ptrs[faila] = (void *)raid6_empty_zero_page;
- ptrs[disks-1] = dq;
-
- raid6_call.gen_syndrome(disks, bytes, ptrs);
-
- /* Restore pointer table */
- ptrs[faila] = dq;
- ptrs[disks-1] = q;
-
- /* Now, pick the proper data tables */
- qmul = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]]];
-
- /* Now do it... */
- while ( bytes-- ) {
- *p++ ^= *dq = qmul[*q ^ *dq];
- q++; dq++;
- }
-}
-EXPORT_SYMBOL_GPL(raid6_datap_recov);
-
-#ifndef __KERNEL__
-/* Testing only */
-
-/* Recover two failed blocks. */
-void raid6_dual_recov(int disks, size_t bytes, int faila, int failb, void **ptrs)
-{
- if ( faila > failb ) {
- int tmp = faila;
- faila = failb;
- failb = tmp;
- }
-
- if ( failb == disks-1 ) {
- if ( faila == disks-2 ) {
- /* P+Q failure. Just rebuild the syndrome. */
- raid6_call.gen_syndrome(disks, bytes, ptrs);
- } else {
- /* data+Q failure. Reconstruct data from P,
- then rebuild syndrome. */
- /* NOT IMPLEMENTED - equivalent to RAID-5 */
- }
- } else {
- if ( failb == disks-2 ) {
- /* data+P failure. */
- raid6_datap_recov(disks, bytes, faila, ptrs);
- } else {
- /* data+data failure. */
- raid6_2data_recov(disks, bytes, faila, failb, ptrs);
- }
- }
-}
-
-#endif
+++ /dev/null
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- * Copyright 2002 H. Peter Anvin - All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- * Boston MA 02111-1307, USA; either version 2 of the License, or
- * (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6sse1.c
- *
- * SSE-1/MMXEXT implementation of RAID-6 syndrome functions
- *
- * This is really an MMX implementation, but it requires SSE-1 or
- * AMD MMXEXT for prefetch support and a few other features. The
- * support for nontemporal memory accesses is enough to make this
- * worthwhile as a separate implementation.
- */
-
-#if defined(__i386__) && !defined(__arch_um__)
-
-#include <linux/raid/pq.h>
-#include "raid6x86.h"
-
-/* Defined in raid6mmx.c */
-extern const struct raid6_mmx_constants {
- u64 x1d;
-} raid6_mmx_constants;
-
-static int raid6_have_sse1_or_mmxext(void)
-{
- /* Not really boot_cpu but "all_cpus" */
- return boot_cpu_has(X86_FEATURE_MMX) &&
- (boot_cpu_has(X86_FEATURE_XMM) ||
- boot_cpu_has(X86_FEATURE_MMXEXT));
-}
-
-/*
- * Plain SSE1 implementation
- */
-static void raid6_sse11_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
- u8 **dptr = (u8 **)ptrs;
- u8 *p, *q;
- int d, z, z0;
-
- z0 = disks - 3; /* Highest data disk */
- p = dptr[z0+1]; /* XOR parity */
- q = dptr[z0+2]; /* RS syndrome */
-
- kernel_fpu_begin();
-
- asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
- asm volatile("pxor %mm5,%mm5"); /* Zero temp */
-
- for ( d = 0 ; d < bytes ; d += 8 ) {
- asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
- asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
- asm volatile("prefetchnta %0" : : "m" (dptr[z0-1][d]));
- asm volatile("movq %mm2,%mm4"); /* Q[0] */
- asm volatile("movq %0,%%mm6" : : "m" (dptr[z0-1][d]));
- for ( z = z0-2 ; z >= 0 ; z-- ) {
- asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
- asm volatile("pcmpgtb %mm4,%mm5");
- asm volatile("paddb %mm4,%mm4");
- asm volatile("pand %mm0,%mm5");
- asm volatile("pxor %mm5,%mm4");
- asm volatile("pxor %mm5,%mm5");
- asm volatile("pxor %mm6,%mm2");
- asm volatile("pxor %mm6,%mm4");
- asm volatile("movq %0,%%mm6" : : "m" (dptr[z][d]));
- }
- asm volatile("pcmpgtb %mm4,%mm5");
- asm volatile("paddb %mm4,%mm4");
- asm volatile("pand %mm0,%mm5");
- asm volatile("pxor %mm5,%mm4");
- asm volatile("pxor %mm5,%mm5");
- asm volatile("pxor %mm6,%mm2");
- asm volatile("pxor %mm6,%mm4");
-
- asm volatile("movntq %%mm2,%0" : "=m" (p[d]));
- asm volatile("movntq %%mm4,%0" : "=m" (q[d]));
- }
-
- asm volatile("sfence" : : : "memory");
- kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_sse1x1 = {
- raid6_sse11_gen_syndrome,
- raid6_have_sse1_or_mmxext,
- "sse1x1",
- 1 /* Has cache hints */
-};
-
-/*
- * Unrolled-by-2 SSE1 implementation
- */
-static void raid6_sse12_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
- u8 **dptr = (u8 **)ptrs;
- u8 *p, *q;
- int d, z, z0;
-
- z0 = disks - 3; /* Highest data disk */
- p = dptr[z0+1]; /* XOR parity */
- q = dptr[z0+2]; /* RS syndrome */
-
- kernel_fpu_begin();
-
- asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
- asm volatile("pxor %mm5,%mm5"); /* Zero temp */
- asm volatile("pxor %mm7,%mm7"); /* Zero temp */
-
- /* We uniformly assume a single prefetch covers at least 16 bytes */
- for ( d = 0 ; d < bytes ; d += 16 ) {
- asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
- asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
- asm volatile("movq %0,%%mm3" : : "m" (dptr[z0][d+8])); /* P[1] */
- asm volatile("movq %mm2,%mm4"); /* Q[0] */
- asm volatile("movq %mm3,%mm6"); /* Q[1] */
- for ( z = z0-1 ; z >= 0 ; z-- ) {
- asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
- asm volatile("pcmpgtb %mm4,%mm5");
- asm volatile("pcmpgtb %mm6,%mm7");
- asm volatile("paddb %mm4,%mm4");
- asm volatile("paddb %mm6,%mm6");
- asm volatile("pand %mm0,%mm5");
- asm volatile("pand %mm0,%mm7");
- asm volatile("pxor %mm5,%mm4");
- asm volatile("pxor %mm7,%mm6");
- asm volatile("movq %0,%%mm5" : : "m" (dptr[z][d]));
- asm volatile("movq %0,%%mm7" : : "m" (dptr[z][d+8]));
- asm volatile("pxor %mm5,%mm2");
- asm volatile("pxor %mm7,%mm3");
- asm volatile("pxor %mm5,%mm4");
- asm volatile("pxor %mm7,%mm6");
- asm volatile("pxor %mm5,%mm5");
- asm volatile("pxor %mm7,%mm7");
- }
- asm volatile("movntq %%mm2,%0" : "=m" (p[d]));
- asm volatile("movntq %%mm3,%0" : "=m" (p[d+8]));
- asm volatile("movntq %%mm4,%0" : "=m" (q[d]));
- asm volatile("movntq %%mm6,%0" : "=m" (q[d+8]));
- }
-
- asm volatile("sfence" : :: "memory");
- kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_sse1x2 = {
- raid6_sse12_gen_syndrome,
- raid6_have_sse1_or_mmxext,
- "sse1x2",
- 1 /* Has cache hints */
-};
-
-#endif
+++ /dev/null
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- * Copyright 2002 H. Peter Anvin - All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- * Boston MA 02111-1307, USA; either version 2 of the License, or
- * (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6sse2.c
- *
- * SSE-2 implementation of RAID-6 syndrome functions
- *
- */
-
-#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__)
-
-#include <linux/raid/pq.h>
-#include "raid6x86.h"
-
-static const struct raid6_sse_constants {
- u64 x1d[2];
-} raid6_sse_constants __attribute__((aligned(16))) = {
- { 0x1d1d1d1d1d1d1d1dULL, 0x1d1d1d1d1d1d1d1dULL },
-};
-
-static int raid6_have_sse2(void)
-{
- /* Not really boot_cpu but "all_cpus" */
- return boot_cpu_has(X86_FEATURE_MMX) &&
- boot_cpu_has(X86_FEATURE_FXSR) &&
- boot_cpu_has(X86_FEATURE_XMM) &&
- boot_cpu_has(X86_FEATURE_XMM2);
-}
-
-/*
- * Plain SSE2 implementation
- */
-static void raid6_sse21_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
- u8 **dptr = (u8 **)ptrs;
- u8 *p, *q;
- int d, z, z0;
-
- z0 = disks - 3; /* Highest data disk */
- p = dptr[z0+1]; /* XOR parity */
- q = dptr[z0+2]; /* RS syndrome */
-
- kernel_fpu_begin();
-
- asm volatile("movdqa %0,%%xmm0" : : "m" (raid6_sse_constants.x1d[0]));
- asm volatile("pxor %xmm5,%xmm5"); /* Zero temp */
-
- for ( d = 0 ; d < bytes ; d += 16 ) {
- asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
- asm volatile("movdqa %0,%%xmm2" : : "m" (dptr[z0][d])); /* P[0] */
- asm volatile("prefetchnta %0" : : "m" (dptr[z0-1][d]));
- asm volatile("movdqa %xmm2,%xmm4"); /* Q[0] */
- asm volatile("movdqa %0,%%xmm6" : : "m" (dptr[z0-1][d]));
- for ( z = z0-2 ; z >= 0 ; z-- ) {
- asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
- asm volatile("pcmpgtb %xmm4,%xmm5");
- asm volatile("paddb %xmm4,%xmm4");
- asm volatile("pand %xmm0,%xmm5");
- asm volatile("pxor %xmm5,%xmm4");
- asm volatile("pxor %xmm5,%xmm5");
- asm volatile("pxor %xmm6,%xmm2");
- asm volatile("pxor %xmm6,%xmm4");
- asm volatile("movdqa %0,%%xmm6" : : "m" (dptr[z][d]));
- }
- asm volatile("pcmpgtb %xmm4,%xmm5");
- asm volatile("paddb %xmm4,%xmm4");
- asm volatile("pand %xmm0,%xmm5");
- asm volatile("pxor %xmm5,%xmm4");
- asm volatile("pxor %xmm5,%xmm5");
- asm volatile("pxor %xmm6,%xmm2");
- asm volatile("pxor %xmm6,%xmm4");
-
- asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
- asm volatile("pxor %xmm2,%xmm2");
- asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
- asm volatile("pxor %xmm4,%xmm4");
- }
-
- asm volatile("sfence" : : : "memory");
- kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_sse2x1 = {
- raid6_sse21_gen_syndrome,
- raid6_have_sse2,
- "sse2x1",
- 1 /* Has cache hints */
-};
-
-/*
- * Unrolled-by-2 SSE2 implementation
- */
-static void raid6_sse22_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
- u8 **dptr = (u8 **)ptrs;
- u8 *p, *q;
- int d, z, z0;
-
- z0 = disks - 3; /* Highest data disk */
- p = dptr[z0+1]; /* XOR parity */
- q = dptr[z0+2]; /* RS syndrome */
-
- kernel_fpu_begin();
-
- asm volatile("movdqa %0,%%xmm0" : : "m" (raid6_sse_constants.x1d[0]));
- asm volatile("pxor %xmm5,%xmm5"); /* Zero temp */
- asm volatile("pxor %xmm7,%xmm7"); /* Zero temp */
-
- /* We uniformly assume a single prefetch covers at least 32 bytes */
- for ( d = 0 ; d < bytes ; d += 32 ) {
- asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
- asm volatile("movdqa %0,%%xmm2" : : "m" (dptr[z0][d])); /* P[0] */
- asm volatile("movdqa %0,%%xmm3" : : "m" (dptr[z0][d+16])); /* P[1] */
- asm volatile("movdqa %xmm2,%xmm4"); /* Q[0] */
- asm volatile("movdqa %xmm3,%xmm6"); /* Q[1] */
- for ( z = z0-1 ; z >= 0 ; z-- ) {
- asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
- asm volatile("pcmpgtb %xmm4,%xmm5");
- asm volatile("pcmpgtb %xmm6,%xmm7");
- asm volatile("paddb %xmm4,%xmm4");
- asm volatile("paddb %xmm6,%xmm6");
- asm volatile("pand %xmm0,%xmm5");
- asm volatile("pand %xmm0,%xmm7");
- asm volatile("pxor %xmm5,%xmm4");
- asm volatile("pxor %xmm7,%xmm6");
- asm volatile("movdqa %0,%%xmm5" : : "m" (dptr[z][d]));
- asm volatile("movdqa %0,%%xmm7" : : "m" (dptr[z][d+16]));
- asm volatile("pxor %xmm5,%xmm2");
- asm volatile("pxor %xmm7,%xmm3");
- asm volatile("pxor %xmm5,%xmm4");
- asm volatile("pxor %xmm7,%xmm6");
- asm volatile("pxor %xmm5,%xmm5");
- asm volatile("pxor %xmm7,%xmm7");
- }
- asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
- asm volatile("movntdq %%xmm3,%0" : "=m" (p[d+16]));
- asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
- asm volatile("movntdq %%xmm6,%0" : "=m" (q[d+16]));
- }
-
- asm volatile("sfence" : : : "memory");
- kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_sse2x2 = {
- raid6_sse22_gen_syndrome,
- raid6_have_sse2,
- "sse2x2",
- 1 /* Has cache hints */
-};
-
-#endif
-
-#if defined(__x86_64__) && !defined(__arch_um__)
-
-/*
- * Unrolled-by-4 SSE2 implementation
- */
-static void raid6_sse24_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
- u8 **dptr = (u8 **)ptrs;
- u8 *p, *q;
- int d, z, z0;
-
- z0 = disks - 3; /* Highest data disk */
- p = dptr[z0+1]; /* XOR parity */
- q = dptr[z0+2]; /* RS syndrome */
-
- kernel_fpu_begin();
-
- asm volatile("movdqa %0,%%xmm0" :: "m" (raid6_sse_constants.x1d[0]));
- asm volatile("pxor %xmm2,%xmm2"); /* P[0] */
- asm volatile("pxor %xmm3,%xmm3"); /* P[1] */
- asm volatile("pxor %xmm4,%xmm4"); /* Q[0] */
- asm volatile("pxor %xmm5,%xmm5"); /* Zero temp */
- asm volatile("pxor %xmm6,%xmm6"); /* Q[1] */
- asm volatile("pxor %xmm7,%xmm7"); /* Zero temp */
- asm volatile("pxor %xmm10,%xmm10"); /* P[2] */
- asm volatile("pxor %xmm11,%xmm11"); /* P[3] */
- asm volatile("pxor %xmm12,%xmm12"); /* Q[2] */
- asm volatile("pxor %xmm13,%xmm13"); /* Zero temp */
- asm volatile("pxor %xmm14,%xmm14"); /* Q[3] */
- asm volatile("pxor %xmm15,%xmm15"); /* Zero temp */
-
- for ( d = 0 ; d < bytes ; d += 64 ) {
- for ( z = z0 ; z >= 0 ; z-- ) {
- /* The second prefetch seems to improve performance... */
- asm volatile("prefetchnta %0" :: "m" (dptr[z][d]));
- asm volatile("prefetchnta %0" :: "m" (dptr[z][d+32]));
- asm volatile("pcmpgtb %xmm4,%xmm5");
- asm volatile("pcmpgtb %xmm6,%xmm7");
- asm volatile("pcmpgtb %xmm12,%xmm13");
- asm volatile("pcmpgtb %xmm14,%xmm15");
- asm volatile("paddb %xmm4,%xmm4");
- asm volatile("paddb %xmm6,%xmm6");
- asm volatile("paddb %xmm12,%xmm12");
- asm volatile("paddb %xmm14,%xmm14");
- asm volatile("pand %xmm0,%xmm5");
- asm volatile("pand %xmm0,%xmm7");
- asm volatile("pand %xmm0,%xmm13");
- asm volatile("pand %xmm0,%xmm15");
- asm volatile("pxor %xmm5,%xmm4");
- asm volatile("pxor %xmm7,%xmm6");
- asm volatile("pxor %xmm13,%xmm12");
- asm volatile("pxor %xmm15,%xmm14");
- asm volatile("movdqa %0,%%xmm5" :: "m" (dptr[z][d]));
- asm volatile("movdqa %0,%%xmm7" :: "m" (dptr[z][d+16]));
- asm volatile("movdqa %0,%%xmm13" :: "m" (dptr[z][d+32]));
- asm volatile("movdqa %0,%%xmm15" :: "m" (dptr[z][d+48]));
- asm volatile("pxor %xmm5,%xmm2");
- asm volatile("pxor %xmm7,%xmm3");
- asm volatile("pxor %xmm13,%xmm10");
- asm volatile("pxor %xmm15,%xmm11");
- asm volatile("pxor %xmm5,%xmm4");
- asm volatile("pxor %xmm7,%xmm6");
- asm volatile("pxor %xmm13,%xmm12");
- asm volatile("pxor %xmm15,%xmm14");
- asm volatile("pxor %xmm5,%xmm5");
- asm volatile("pxor %xmm7,%xmm7");
- asm volatile("pxor %xmm13,%xmm13");
- asm volatile("pxor %xmm15,%xmm15");
- }
- asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
- asm volatile("pxor %xmm2,%xmm2");
- asm volatile("movntdq %%xmm3,%0" : "=m" (p[d+16]));
- asm volatile("pxor %xmm3,%xmm3");
- asm volatile("movntdq %%xmm10,%0" : "=m" (p[d+32]));
- asm volatile("pxor %xmm10,%xmm10");
- asm volatile("movntdq %%xmm11,%0" : "=m" (p[d+48]));
- asm volatile("pxor %xmm11,%xmm11");
- asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
- asm volatile("pxor %xmm4,%xmm4");
- asm volatile("movntdq %%xmm6,%0" : "=m" (q[d+16]));
- asm volatile("pxor %xmm6,%xmm6");
- asm volatile("movntdq %%xmm12,%0" : "=m" (q[d+32]));
- asm volatile("pxor %xmm12,%xmm12");
- asm volatile("movntdq %%xmm14,%0" : "=m" (q[d+48]));
- asm volatile("pxor %xmm14,%xmm14");
- }
-
- asm volatile("sfence" : : : "memory");
- kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_sse2x4 = {
- raid6_sse24_gen_syndrome,
- raid6_have_sse2,
- "sse2x4",
- 1 /* Has cache hints */
-};
-
-#endif
+++ /dev/null
-#
-# This is a simple Makefile to test some of the RAID-6 code
-# from userspace.
-#
-
-CC = gcc
-OPTFLAGS = -O2 # Adjust as desired
-CFLAGS = -I.. -I ../../../include -g $(OPTFLAGS)
-LD = ld
-AWK = awk
-AR = ar
-RANLIB = ranlib
-
-.c.o:
- $(CC) $(CFLAGS) -c -o $@ $<
-
-%.c: ../%.c
- cp -f $< $@
-
-%.uc: ../%.uc
- cp -f $< $@
-
-all: raid6.a raid6test
-
-raid6.a: raid6int1.o raid6int2.o raid6int4.o raid6int8.o raid6int16.o \
- raid6int32.o \
- raid6mmx.o raid6sse1.o raid6sse2.o \
- raid6altivec1.o raid6altivec2.o raid6altivec4.o raid6altivec8.o \
- raid6recov.o raid6algos.o \
- raid6tables.o
- rm -f $@
- $(AR) cq $@ $^
- $(RANLIB) $@
-
-raid6test: test.c raid6.a
- $(CC) $(CFLAGS) -o raid6test $^
-
-raid6altivec1.c: raid6altivec.uc ../unroll.awk
- $(AWK) ../unroll.awk -vN=1 < raid6altivec.uc > $@
-
-raid6altivec2.c: raid6altivec.uc ../unroll.awk
- $(AWK) ../unroll.awk -vN=2 < raid6altivec.uc > $@
-
-raid6altivec4.c: raid6altivec.uc ../unroll.awk
- $(AWK) ../unroll.awk -vN=4 < raid6altivec.uc > $@
-
-raid6altivec8.c: raid6altivec.uc ../unroll.awk
- $(AWK) ../unroll.awk -vN=8 < raid6altivec.uc > $@
-
-raid6int1.c: raid6int.uc ../unroll.awk
- $(AWK) ../unroll.awk -vN=1 < raid6int.uc > $@
-
-raid6int2.c: raid6int.uc ../unroll.awk
- $(AWK) ../unroll.awk -vN=2 < raid6int.uc > $@
-
-raid6int4.c: raid6int.uc ../unroll.awk
- $(AWK) ../unroll.awk -vN=4 < raid6int.uc > $@
-
-raid6int8.c: raid6int.uc ../unroll.awk
- $(AWK) ../unroll.awk -vN=8 < raid6int.uc > $@
-
-raid6int16.c: raid6int.uc ../unroll.awk
- $(AWK) ../unroll.awk -vN=16 < raid6int.uc > $@
-
-raid6int32.c: raid6int.uc ../unroll.awk
- $(AWK) ../unroll.awk -vN=32 < raid6int.uc > $@
-
-raid6tables.c: mktables
- ./mktables > raid6tables.c
-
-clean:
- rm -f *.o *.a mktables mktables.c raid6int.uc raid6*.c raid6test
-
-spotless: clean
- rm -f *~
+++ /dev/null
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- * Copyright 2002-2007 H. Peter Anvin - All Rights Reserved
- *
- * This file is part of the Linux kernel, and is made available under
- * the terms of the GNU General Public License version 2 or (at your
- * option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6test.c
- *
- * Test RAID-6 recovery with various algorithms
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <linux/raid/pq.h>
-
-#define NDISKS 16 /* Including P and Q */
-
-const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
-struct raid6_calls raid6_call;
-
-char *dataptrs[NDISKS];
-char data[NDISKS][PAGE_SIZE];
-char recovi[PAGE_SIZE], recovj[PAGE_SIZE];
-
-static void makedata(void)
-{
- int i, j;
-
- for (i = 0; i < NDISKS; i++) {
- for (j = 0; j < PAGE_SIZE; j++)
- data[i][j] = rand();
-
- dataptrs[i] = data[i];
- }
-}
-
-static char disk_type(int d)
-{
- switch (d) {
- case NDISKS-2:
- return 'P';
- case NDISKS-1:
- return 'Q';
- default:
- return 'D';
- }
-}
-
-static int test_disks(int i, int j)
-{
- int erra, errb;
-
- memset(recovi, 0xf0, PAGE_SIZE);
- memset(recovj, 0xba, PAGE_SIZE);
-
- dataptrs[i] = recovi;
- dataptrs[j] = recovj;
-
- raid6_dual_recov(NDISKS, PAGE_SIZE, i, j, (void **)&dataptrs);
-
- erra = memcmp(data[i], recovi, PAGE_SIZE);
- errb = memcmp(data[j], recovj, PAGE_SIZE);
-
- if (i < NDISKS-2 && j == NDISKS-1) {
- /* We don't implement the DQ failure scenario, since it's
- equivalent to a RAID-5 failure (XOR, then recompute Q) */
- erra = errb = 0;
- } else {
- printf("algo=%-8s faila=%3d(%c) failb=%3d(%c) %s\n",
- raid6_call.name,
- i, disk_type(i),
- j, disk_type(j),
- (!erra && !errb) ? "OK" :
- !erra ? "ERRB" :
- !errb ? "ERRA" : "ERRAB");
- }
-
- dataptrs[i] = data[i];
- dataptrs[j] = data[j];
-
- return erra || errb;
-}
-
-int main(int argc, char *argv[])
-{
- const struct raid6_calls *const *algo;
- int i, j;
- int err = 0;
-
- makedata();
-
- for (algo = raid6_algos; *algo; algo++) {
- if (!(*algo)->valid || (*algo)->valid()) {
- raid6_call = **algo;
-
- /* Nuke syndromes */
- memset(data[NDISKS-2], 0xee, 2*PAGE_SIZE);
-
- /* Generate assumed good syndrome */
- raid6_call.gen_syndrome(NDISKS, PAGE_SIZE,
- (void **)&dataptrs);
-
- for (i = 0; i < NDISKS-1; i++)
- for (j = i+1; j < NDISKS; j++)
- err += test_disks(i, j);
- }
- printf("\n");
- }
-
- printf("\n");
- /* Pick the best algorithm test */
- raid6_select_algo();
-
- if (err)
- printf("\n*** ERRORS FOUND ***\n");
-
- return err;
-}
+++ /dev/null
-/* ----------------------------------------------------------------------- *
- *
- * Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- * Boston MA 02111-1307, USA; either version 2 of the License, or
- * (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6x86.h
- *
- * Definitions common to x86 and x86-64 RAID-6 code only
- */
-
-#ifndef LINUX_RAID_RAID6X86_H
-#define LINUX_RAID_RAID6X86_H
-
-#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__)
-
-#ifdef __KERNEL__ /* Real code */
-
-#include <asm/i387.h>
-
-#else /* Dummy code for user space testing */
-
-static inline void kernel_fpu_begin(void)
-{
-}
-
-static inline void kernel_fpu_end(void)
-{
-}
-
-#define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */
-#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE and FXRSTOR instructions
- * (fast save and restore) */
-#define X86_FEATURE_XMM (0*32+25) /* Streaming SIMD Extensions */
-#define X86_FEATURE_XMM2 (0*32+26) /* Streaming SIMD Extensions-2 */
-#define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */
-
-/* Should work well enough on modern CPUs for testing */
-static inline int boot_cpu_has(int flag)
-{
- u32 eax = (flag >> 5) ? 0x80000001 : 1;
- u32 edx;
-
- asm volatile("cpuid"
- : "+a" (eax), "=d" (edx)
- : : "ecx", "ebx");
-
- return (edx >> (flag & 31)) & 1;
-}
-
-#endif /* ndef __KERNEL__ */
-
-#endif
-#endif
+++ /dev/null
-
-# This filter requires one command line option of form -vN=n
-# where n must be a decimal number.
-#
-# Repeat each input line containing $$ n times, replacing $$ with 0...n-1.
-# Replace each $# with n, and each $* with a single $.
-
-BEGIN {
- n = N + 0
-}
-{
- if (/\$\$/) { rep = n } else { rep = 1 }
- for (i = 0; i < rep; ++i) {
- tmp = $0
- gsub(/\$\$/, i, tmp)
- gsub(/\$\#/, n, tmp)
- gsub(/\$\*/, "$", tmp)
- print tmp
- }
-}
-config IR_CORE
- tristate
+menuconfig IR_CORE
+ tristate "Infrared remote controller adapters"
depends on INPUT
default INPUT
+ ---help---
+ Enable support for Remote Controllers on Linux. This is
+ needed in order to support several video capture adapters.
+
+ Enable this option if you have a video capture board even
+ if you don't need IR, as otherwise, you may not be able to
+ compile the driver for your adapter.
config VIDEO_IR
tristate
depends on IR_CORE
default IR_CORE
+if IR_CORE
+
config LIRC
tristate
default y
Enable this option to build the Linux Infrared Remote
Control (LIRC) core device interface driver. The LIRC
interface passes raw IR to and from userspace, where the
- LIRC daemon handles protocol decoding for IR reception ann
+ LIRC daemon handles protocol decoding for IR reception and
encoding for IR transmitting (aka "blasting").
source "drivers/media/IR/keymaps/Kconfig"
To compile this driver as a module, choose M here: the
module will be called mceusb.
+
+config IR_ENE
+ tristate "ENE eHome Receiver/Transciever (pnp id: ENE0100/ENE02xxx)"
+ depends on PNP
+ depends on IR_CORE
+ ---help---
+ Say Y here to enable support for integrated infrared receiver
+ /transciever made by ENE.
+
+ You can see if you have it by looking at lspnp output.
+ Output should include ENE0100 ENE0200 or something similiar.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ene_ir.
+
+config IR_STREAMZAP
+ tristate "Streamzap PC Remote IR Receiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on IR_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use a Streamzap PC Remote
+ Infrared Receiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called streamzap.
+
+endif #IR_CORE
# stand-alone IR receivers/transmitters
obj-$(CONFIG_IR_IMON) += imon.o
obj-$(CONFIG_IR_MCEUSB) += mceusb.o
+obj-$(CONFIG_IR_ENE) += ene_ir.o
+obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
--- /dev/null
+/*
+ * driver for ENE KB3926 B/C/D CIR (pnp id: ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+#include <media/ir-common.h>
+#include "ene_ir.h"
+
+
+static int sample_period = -1;
+static int enable_idle = 1;
+static int input = 1;
+static int debug;
+static int txsim;
+
+static int ene_irq_status(struct ene_device *dev);
+
+/* read a hardware register */
+static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
+{
+ u8 retval;
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+ retval = inb(dev->hw_io + ENE_IO);
+
+ ene_dbg_verbose("reg %04x == %02x", reg, retval);
+ return retval;
+}
+
+/* write a hardware register */
+static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
+{
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+ outb(value, dev->hw_io + ENE_IO);
+
+ ene_dbg_verbose("reg %04x <- %02x", reg, value);
+}
+
+/* change specific bits in hardware register */
+static void ene_hw_write_reg_mask(struct ene_device *dev,
+ u16 reg, u8 value, u8 mask)
+{
+ u8 regvalue;
+
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+
+ regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
+ regvalue |= (value & mask);
+ outb(regvalue, dev->hw_io + ENE_IO);
+
+ ene_dbg_verbose("reg %04x <- %02x (mask=%02x)", reg, value, mask);
+}
+
+/* detect hardware features */
+static int ene_hw_detect(struct ene_device *dev)
+{
+ u8 chip_major, chip_minor;
+ u8 hw_revision, old_ver;
+ u8 tmp;
+ u8 fw_capabilities;
+ int pll_freq;
+
+ tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
+ ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
+
+ chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
+ chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
+
+ ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
+ hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
+ old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
+
+ pll_freq = (ene_hw_read_reg(dev, ENE_PLLFRH) << 4) +
+ (ene_hw_read_reg(dev, ENE_PLLFRL) >> 4);
+
+ if (pll_freq != 1000)
+ dev->rx_period_adjust = 4;
+ else
+ dev->rx_period_adjust = 2;
+
+
+ ene_printk(KERN_NOTICE, "PLL freq = %d\n", pll_freq);
+
+ if (hw_revision == 0xFF) {
+
+ ene_printk(KERN_WARNING, "device seems to be disabled\n");
+ ene_printk(KERN_WARNING,
+ "send a mail to lirc-list@lists.sourceforge.net\n");
+ ene_printk(KERN_WARNING, "please attach output of acpidump\n");
+ return -ENODEV;
+ }
+
+ if (chip_major == 0x33) {
+ ene_printk(KERN_WARNING, "chips 0x33xx aren't supported\n");
+ return -ENODEV;
+ }
+
+ if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_C;
+ } else if (old_ver == 0x24 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_B;
+ ene_printk(KERN_NOTICE, "KB3926B detected\n");
+ } else {
+ dev->hw_revision = ENE_HW_D;
+ ene_printk(KERN_WARNING,
+ "unknown ENE chip detected, assuming KB3926D\n");
+ ene_printk(KERN_WARNING,
+ "driver support might be not complete");
+
+ }
+
+ ene_printk(KERN_DEBUG,
+ "chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n",
+ chip_major, chip_minor, old_ver, hw_revision);
+
+ /* detect features hardware supports */
+ if (dev->hw_revision < ENE_HW_C)
+ return 0;
+
+ fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
+ ene_dbg("Firmware capabilities: %02x", fw_capabilities);
+
+ dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
+ dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
+
+ dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
+ (fw_capabilities & ENE_FW2_FAN_AS_NRML_IN);
+
+ ene_printk(KERN_NOTICE, "hardware features:\n");
+ ene_printk(KERN_NOTICE,
+ "learning and transmit %s, gpio40_learn %s, fan_in %s\n",
+ dev->hw_learning_and_tx_capable ? "on" : "off",
+ dev->hw_gpio40_learning ? "on" : "off",
+ dev->hw_fan_as_normal_input ? "on" : "off");
+
+ if (dev->hw_learning_and_tx_capable) {
+ ene_printk(KERN_WARNING,
+ "Device supports transmitting, but that support is\n");
+ ene_printk(KERN_WARNING,
+ "lightly tested. Please test it and mail\n");
+ ene_printk(KERN_WARNING,
+ "lirc-list@lists.sourceforge.net\n");
+ }
+ return 0;
+}
+
+/* this enables/disables IR input via gpio40*/
+static void ene_enable_gpio40_receive(struct ene_device *dev, int enable)
+{
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, enable ?
+ 0 : ENE_CIR_CONF2_GPIO40DIS,
+ ENE_CIR_CONF2_GPIO40DIS);
+}
+
+/* this enables/disables IR via standard input */
+static void ene_enable_normal_receive(struct ene_device *dev, int enable)
+{
+ ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_RX_ON : 0);
+}
+
+/* this enables/disables IR input via unused fan tachtometer input */
+static void ene_enable_fan_receive(struct ene_device *dev, int enable)
+{
+ if (!enable)
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
+ else {
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
+ }
+ dev->rx_fan_input_inuse = enable;
+}
+
+
+/* Sense current received carrier */
+static int ene_rx_sense_carrier(struct ene_device *dev)
+{
+ int period = ene_hw_read_reg(dev, ENE_RX_CARRIER);
+ int carrier;
+ ene_dbg("RX: hardware carrier period = %02x", period);
+
+ if (!(period & ENE_RX_CARRIER_VALID))
+ return 0;
+
+ period &= ~ENE_RX_CARRIER_VALID;
+
+ if (!period)
+ return 0;
+
+ carrier = 2000000 / period;
+ ene_dbg("RX: sensed carrier = %d Hz", carrier);
+ return carrier;
+}
+
+/* determine which input to use*/
+static void ene_rx_set_inputs(struct ene_device *dev)
+{
+ int learning_mode = dev->learning_enabled;
+
+ ene_dbg("RX: setup receiver, learning mode = %d", learning_mode);
+
+ ene_enable_normal_receive(dev, 1);
+
+ /* old hardware doesn't support learning mode for sure */
+ if (dev->hw_revision <= ENE_HW_B)
+ return;
+
+ /* receiver not learning capable, still set gpio40 correctly */
+ if (!dev->hw_learning_and_tx_capable) {
+ ene_enable_gpio40_receive(dev, !dev->hw_gpio40_learning);
+ return;
+ }
+
+ /* enable learning mode */
+ if (learning_mode) {
+ ene_enable_gpio40_receive(dev, dev->hw_gpio40_learning);
+
+ /* fan input is not used for learning */
+ if (dev->hw_fan_as_normal_input)
+ ene_enable_fan_receive(dev, 0);
+
+ /* disable learning mode */
+ } else {
+ if (dev->hw_fan_as_normal_input) {
+ ene_enable_fan_receive(dev, 1);
+ ene_enable_normal_receive(dev, 0);
+ } else
+ ene_enable_gpio40_receive(dev,
+ !dev->hw_gpio40_learning);
+ }
+
+ /* set few additional settings for this mode */
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_mode ?
+ ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
+
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_mode ?
+ ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
+
+ if (dev->rx_fan_input_inuse) {
+ dev->props->rx_resolution = ENE_SAMPLE_PERIOD_FAN * 1000;
+
+ dev->props->timeout =
+ ENE_FAN_VALUE_MASK * ENE_SAMPLE_PERIOD_FAN * 1000;
+ } else {
+ dev->props->rx_resolution = sample_period * 1000;
+ dev->props->timeout = ENE_MAXGAP * 1000;
+ }
+}
+
+/* Enable the device for receive */
+static void ene_rx_enable(struct ene_device *dev)
+{
+ u8 reg_value;
+
+ if (dev->hw_revision < ENE_HW_C) {
+ ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
+ ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
+ } else {
+ reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
+ reg_value |= ENEC_IRQ_UNK_EN;
+ reg_value &= ~ENEC_IRQ_STATUS;
+ reg_value |= (dev->irq & ENEC_IRQ_MASK);
+ ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
+ ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
+ }
+
+ ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
+ ene_rx_set_inputs(dev);
+
+ /* set sampling period */
+ ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
+
+ /* ack any pending irqs - just in case */
+ ene_irq_status(dev);
+
+ /* enable firmware bits */
+ ene_hw_write_reg_mask(dev, ENE_FW1,
+ ENE_FW1_ENABLE | ENE_FW1_IRQ,
+ ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+ /* enter idle mode */
+ ir_raw_event_set_idle(dev->idev, 1);
+ ir_raw_event_reset(dev->idev);
+
+}
+
+/* Disable the device receiver */
+static void ene_rx_disable(struct ene_device *dev)
+{
+ /* disable inputs */
+ ene_enable_normal_receive(dev, 0);
+
+ if (dev->hw_fan_as_normal_input)
+ ene_enable_fan_receive(dev, 0);
+
+ /* disable hardware IRQ and firmware flag */
+ ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+ ir_raw_event_set_idle(dev->idev, 1);
+ ir_raw_event_reset(dev->idev);
+}
+
+
+/* prepare transmission */
+static void ene_tx_prepare(struct ene_device *dev)
+{
+ u8 conf1;
+
+ conf1 = ene_hw_read_reg(dev, ENE_CIR_CONF1);
+ dev->saved_conf1 = conf1;
+
+ if (dev->hw_revision == ENE_HW_C)
+ conf1 &= ~ENE_CIR_CONF1_TX_CLEAR;
+
+ /* Enable TX engine */
+ conf1 |= ENE_CIR_CONF1_TX_ON;
+
+ /* Set carrier */
+ if (dev->tx_period) {
+
+ /* NOTE: duty cycle handling is just a guess, it might
+ not be aviable. Default values were tested */
+ int tx_period_in500ns = dev->tx_period * 2;
+
+ int tx_pulse_width_in_500ns =
+ tx_period_in500ns / (100 / dev->tx_duty_cycle);
+
+ if (!tx_pulse_width_in_500ns)
+ tx_pulse_width_in_500ns = 1;
+
+ ene_dbg("TX: pulse distance = %d * 500 ns", tx_period_in500ns);
+ ene_dbg("TX: pulse width = %d * 500 ns",
+ tx_pulse_width_in_500ns);
+
+ ene_hw_write_reg(dev, ENE_TX_PERIOD, ENE_TX_PERIOD_UNKBIT |
+ tx_period_in500ns);
+
+ ene_hw_write_reg(dev, ENE_TX_PERIOD_PULSE,
+ tx_pulse_width_in_500ns);
+
+ conf1 |= ENE_CIR_CONF1_TX_CARR;
+ } else
+ conf1 &= ~ENE_CIR_CONF1_TX_CARR;
+
+ ene_hw_write_reg(dev, ENE_CIR_CONF1, conf1);
+
+}
+
+/* end transmission */
+static void ene_tx_complete(struct ene_device *dev)
+{
+ ene_hw_write_reg(dev, ENE_CIR_CONF1, dev->saved_conf1);
+ dev->tx_buffer = NULL;
+}
+
+/* set transmit mask */
+static void ene_tx_hw_set_transmiter_mask(struct ene_device *dev)
+{
+ u8 txport1 = ene_hw_read_reg(dev, ENE_TX_PORT1) & ~ENE_TX_PORT1_EN;
+ u8 txport2 = ene_hw_read_reg(dev, ENE_TX_PORT2) & ~ENE_TX_PORT2_EN;
+
+ if (dev->transmitter_mask & 0x01)
+ txport1 |= ENE_TX_PORT1_EN;
+
+ if (dev->transmitter_mask & 0x02)
+ txport2 |= ENE_TX_PORT2_EN;
+
+ ene_hw_write_reg(dev, ENE_TX_PORT1, txport1);
+ ene_hw_write_reg(dev, ENE_TX_PORT2, txport2);
+}
+
+/* TX one sample - must be called with dev->hw_lock*/
+static void ene_tx_sample(struct ene_device *dev)
+{
+ u8 raw_tx;
+ u32 sample;
+
+ if (!dev->tx_buffer) {
+ ene_dbg("TX: attempt to transmit NULL buffer");
+ return;
+ }
+
+ /* Grab next TX sample */
+ if (!dev->tx_sample) {
+again:
+ if (dev->tx_pos == dev->tx_len + 1) {
+ if (!dev->tx_done) {
+ ene_dbg("TX: no more data to send");
+ dev->tx_done = 1;
+ goto exit;
+ } else {
+ ene_dbg("TX: last sample sent by hardware");
+ ene_tx_complete(dev);
+ complete(&dev->tx_complete);
+ return;
+ }
+ }
+
+ sample = dev->tx_buffer[dev->tx_pos++];
+ dev->tx_sample_pulse = !dev->tx_sample_pulse;
+
+ ene_dbg("TX: sample %8d (%s)", sample, dev->tx_sample_pulse ?
+ "pulse" : "space");
+
+ dev->tx_sample = DIV_ROUND_CLOSEST(sample, ENE_TX_SMPL_PERIOD);
+
+ /* guard against too short samples */
+ if (!dev->tx_sample)
+ goto again;
+ }
+
+ raw_tx = min(dev->tx_sample , (unsigned int)ENE_TX_SMLP_MASK);
+ dev->tx_sample -= raw_tx;
+
+ if (dev->tx_sample_pulse)
+ raw_tx |= ENE_TX_PULSE_MASK;
+
+ ene_hw_write_reg(dev, ENE_TX_INPUT1 + dev->tx_reg, raw_tx);
+ dev->tx_reg = !dev->tx_reg;
+exit:
+ /* simulate TX done interrupt */
+ if (txsim)
+ mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);
+}
+
+/* timer to simulate tx done interrupt */
+static void ene_tx_irqsim(unsigned long data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_tx_sample(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+
+/* read irq status and ack it */
+static int ene_irq_status(struct ene_device *dev)
+{
+ u8 irq_status;
+ u8 fw_flags1, fw_flags2;
+ int cur_rx_pointer;
+ int retval = 0;
+
+ fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
+ cur_rx_pointer = !!(fw_flags2 & ENE_FW2_BUF_HIGH);
+
+ if (dev->hw_revision < ENE_HW_C) {
+ irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
+
+ if (!(irq_status & ENEB_IRQ_STATUS_IR))
+ return 0;
+
+ ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
+ irq_status & ~ENEB_IRQ_STATUS_IR);
+ dev->rx_pointer = cur_rx_pointer;
+ return ENE_IRQ_RX;
+ }
+
+ irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
+
+ if (!(irq_status & ENEC_IRQ_STATUS))
+ return 0;
+
+ /* original driver does that twice - a workaround ? */
+ ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+ ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+
+ /* clear unknown flag in F8F9 */
+ if (fw_flags2 & ENE_FW2_IRQ_CLR)
+ ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
+
+ /* check if this is a TX interrupt */
+ fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
+ if (fw_flags1 & ENE_FW1_TXIRQ) {
+ ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
+ retval |= ENE_IRQ_TX;
+ }
+
+ /* Check if this is RX interrupt */
+ if (dev->rx_pointer != cur_rx_pointer) {
+ retval |= ENE_IRQ_RX;
+ dev->rx_pointer = cur_rx_pointer;
+
+ } else if (!(retval & ENE_IRQ_TX)) {
+ ene_dbg("RX: interrupt without change in RX pointer(%d)",
+ dev->rx_pointer);
+ retval |= ENE_IRQ_RX;
+ }
+
+ if ((retval & ENE_IRQ_RX) && (retval & ENE_IRQ_TX))
+ ene_dbg("both RX and TX interrupt at same time");
+
+ return retval;
+}
+
+/* interrupt handler */
+static irqreturn_t ene_isr(int irq, void *data)
+{
+ u16 hw_value;
+ int i, hw_sample;
+ int pulse;
+ int irq_status;
+ unsigned long flags;
+ int carrier = 0;
+ irqreturn_t retval = IRQ_NONE;
+ struct ene_device *dev = (struct ene_device *)data;
+ struct ir_raw_event ev;
+
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ irq_status = ene_irq_status(dev);
+
+ if (!irq_status)
+ goto unlock;
+
+ retval = IRQ_HANDLED;
+
+ if (irq_status & ENE_IRQ_TX) {
+
+ if (!dev->hw_learning_and_tx_capable) {
+ ene_dbg("TX interrupt on unsupported device!");
+ goto unlock;
+ }
+ ene_tx_sample(dev);
+ }
+
+ if (!(irq_status & ENE_IRQ_RX))
+ goto unlock;
+
+
+ if (dev->carrier_detect_enabled || debug)
+ carrier = ene_rx_sense_carrier(dev);
+#if 0
+ /* TODO */
+ if (dev->carrier_detect_enabled && carrier)
+ ir_raw_event_report_frequency(dev->idev, carrier);
+#endif
+
+ for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
+ hw_value = ene_hw_read_reg(dev,
+ ENE_SAMPLE_BUFFER + dev->rx_pointer * 4 + i);
+
+ if (dev->rx_fan_input_inuse) {
+ /* read high part of the sample */
+ hw_value |= ene_hw_read_reg(dev,
+ ENE_SAMPLE_BUFFER_FAN +
+ dev->rx_pointer * 4 + i) << 8;
+ pulse = hw_value & ENE_FAN_SMPL_PULS_MSK;
+
+ /* clear space bit, and other unused bits */
+ hw_value &= ENE_FAN_VALUE_MASK;
+ hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
+
+ } else {
+ pulse = !(hw_value & ENE_SAMPLE_SPC_MASK);
+ hw_value &= ENE_SAMPLE_VALUE_MASK;
+ hw_sample = hw_value * sample_period;
+
+ if (dev->rx_period_adjust) {
+ hw_sample *= (100 - dev->rx_period_adjust);
+ hw_sample /= 100;
+ }
+ }
+ /* no more data */
+ if (!(hw_value))
+ break;
+
+ ene_dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
+
+
+ ev.duration = hw_sample * 1000;
+ ev.pulse = pulse;
+ ir_raw_event_store_with_filter(dev->idev, &ev);
+ }
+
+ ir_raw_event_handle(dev->idev);
+unlock:
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return retval;
+}
+
+/* Initialize default settings */
+static void ene_setup_settings(struct ene_device *dev)
+{
+ dev->tx_period = 32;
+ dev->tx_duty_cycle = 25; /*%*/
+ dev->transmitter_mask = 3;
+
+ /* Force learning mode if (input == 2), otherwise
+ let user set it with LIRC_SET_REC_CARRIER */
+ dev->learning_enabled =
+ (input == 2 && dev->hw_learning_and_tx_capable);
+
+ dev->rx_pointer = -1;
+
+}
+
+/* outside interface: called on first open*/
+static int ene_open(void *data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->in_use = 1;
+ ene_setup_settings(dev);
+ ene_rx_enable(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
+}
+
+/* outside interface: called on device close*/
+static void ene_close(void *data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+ spin_lock_irqsave(&dev->hw_lock, flags);
+
+ ene_rx_disable(dev);
+ dev->in_use = 0;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* outside interface: set transmitter mask */
+static int ene_set_tx_mask(void *data, u32 tx_mask)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+ ene_dbg("TX: attempt to set transmitter mask %02x", tx_mask);
+
+ /* invalid txmask */
+ if (!tx_mask || tx_mask & ~0x3) {
+ ene_dbg("TX: invalid mask");
+ /* return count of transmitters */
+ return 2;
+ }
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->transmitter_mask = tx_mask;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
+}
+
+/* outside interface : set tx carrier */
+static int ene_set_tx_carrier(void *data, u32 carrier)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+ u32 period = 1000000 / carrier; /* (1 / freq) (* # usec in 1 sec) */
+
+ ene_dbg("TX: attempt to set tx carrier to %d kHz", carrier);
+
+ if (period && (period > ENE_TX_PERIOD_MAX ||
+ period < ENE_TX_PERIOD_MIN)) {
+
+ ene_dbg("TX: out of range %d-%d carrier, "
+ "falling back to 32 kHz",
+ 1000 / ENE_TX_PERIOD_MIN,
+ 1000 / ENE_TX_PERIOD_MAX);
+
+ period = 32; /* this is just a coincidence!!! */
+ }
+ ene_dbg("TX: set carrier to %d kHz", carrier);
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->tx_period = period;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
+}
+
+
+/* outside interface: enable learning mode */
+static int ene_set_learning_mode(void *data, int enable)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+ if (enable == dev->learning_enabled)
+ return 0;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->learning_enabled = enable;
+ ene_rx_set_inputs(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
+}
+
+/* outside interface: set rec carrier */
+static int ene_set_rec_carrier(void *data, u32 min, u32 max)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ ene_set_learning_mode(dev,
+ max > ENE_NORMAL_RX_HI || min < ENE_NORMAL_RX_LOW);
+ return 0;
+}
+
+/* outside interface: enable or disable idle mode */
+static void ene_rx_set_idle(void *data, int idle)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ ene_dbg("%sabling idle mode", idle ? "en" : "dis");
+
+ ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
+ (enable_idle && idle) ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
+ ENE_CIR_SAMPLE_OVERFLOW);
+}
+
+
+/* outside interface: transmit */
+static int ene_transmit(void *data, int *buf, u32 n)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ dev->tx_buffer = buf;
+ dev->tx_len = n / sizeof(int);
+ dev->tx_pos = 0;
+ dev->tx_reg = 0;
+ dev->tx_done = 0;
+ dev->tx_sample = 0;
+ dev->tx_sample_pulse = 0;
+
+ ene_dbg("TX: %d samples", dev->tx_len);
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+
+ ene_tx_hw_set_transmiter_mask(dev);
+ ene_tx_prepare(dev);
+
+ /* Transmit first two samples */
+ ene_tx_sample(dev);
+ ene_tx_sample(dev);
+
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+ if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {
+ ene_dbg("TX: timeout");
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_tx_complete(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ } else
+ ene_dbg("TX: done");
+ return n;
+}
+
+
+/* probe entry */
+static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
+{
+ int error = -ENOMEM;
+ struct ir_dev_props *ir_props;
+ struct input_dev *input_dev;
+ struct ene_device *dev;
+
+ /* allocate memory */
+ input_dev = input_allocate_device();
+ ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
+
+ if (!input_dev || !ir_props || !dev)
+ goto error;
+
+ /* validate resources */
+ error = -ENODEV;
+
+ if (!pnp_port_valid(pnp_dev, 0) ||
+ pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
+ goto error;
+
+ if (!pnp_irq_valid(pnp_dev, 0))
+ goto error;
+
+ dev->hw_io = pnp_port_start(pnp_dev, 0);
+ dev->irq = pnp_irq(pnp_dev, 0);
+ spin_lock_init(&dev->hw_lock);
+
+ /* claim the resources */
+ error = -EBUSY;
+ if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
+ goto error;
+
+ if (request_irq(dev->irq, ene_isr,
+ IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
+ goto error;
+
+ pnp_set_drvdata(pnp_dev, dev);
+ dev->pnp_dev = pnp_dev;
+
+ /* detect hardware version and features */
+ error = ene_hw_detect(dev);
+ if (error)
+ goto error;
+
+ ene_setup_settings(dev);
+
+ if (!dev->hw_learning_and_tx_capable && txsim) {
+ dev->hw_learning_and_tx_capable = 1;
+ setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
+ (long unsigned int)dev);
+ ene_printk(KERN_WARNING,
+ "Simulation of TX activated\n");
+ }
+
+ ir_props->driver_type = RC_DRIVER_IR_RAW;
+ ir_props->allowed_protos = IR_TYPE_ALL;
+ ir_props->priv = dev;
+ ir_props->open = ene_open;
+ ir_props->close = ene_close;
+ ir_props->min_timeout = ENE_MINGAP * 1000;
+ ir_props->max_timeout = ENE_MAXGAP * 1000;
+ ir_props->timeout = ENE_MAXGAP * 1000;
+
+ if (dev->hw_revision == ENE_HW_B)
+ ir_props->s_idle = ene_rx_set_idle;
+
+
+ dev->props = ir_props;
+ dev->idev = input_dev;
+
+ /* don't allow too short/long sample periods */
+ if (sample_period < 5 || sample_period > 0x7F)
+ sample_period = -1;
+
+ /* choose default sample period */
+ if (sample_period == -1) {
+
+ sample_period = 50;
+
+ /* on revB, hardware idle mode eats first sample
+ if we set too low sample period */
+ if (dev->hw_revision == ENE_HW_B && enable_idle)
+ sample_period = 75;
+ }
+
+ ir_props->rx_resolution = sample_period * 1000;
+
+ if (dev->hw_learning_and_tx_capable) {
+
+ ir_props->s_learning_mode = ene_set_learning_mode;
+
+ if (input == 0)
+ ir_props->s_rx_carrier_range = ene_set_rec_carrier;
+
+ init_completion(&dev->tx_complete);
+ ir_props->tx_ir = ene_transmit;
+ ir_props->s_tx_mask = ene_set_tx_mask;
+ ir_props->s_tx_carrier = ene_set_tx_carrier;
+ ir_props->tx_resolution = ENE_TX_SMPL_PERIOD * 1000;
+ /* ir_props->s_carrier_report = ene_set_carrier_report; */
+ }
+
+
+ device_set_wakeup_capable(&pnp_dev->dev, 1);
+ device_set_wakeup_enable(&pnp_dev->dev, 1);
+
+ if (dev->hw_learning_and_tx_capable)
+ input_dev->name = "ENE eHome Infrared Remote Transceiver";
+ else
+ input_dev->name = "ENE eHome Infrared Remote Receiver";
+
+
+ error = -ENODEV;
+ if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
+ ENE_DRIVER_NAME))
+ goto error;
+
+
+ ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
+ return 0;
+error:
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ if (dev->hw_io)
+ release_region(dev->hw_io, ENE_MAX_IO);
+
+ input_free_device(input_dev);
+ kfree(ir_props);
+ kfree(dev);
+ return error;
+}
+
+/* main unload function */
+static void ene_remove(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_rx_disable(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+ free_irq(dev->irq, dev);
+ release_region(dev->hw_io, ENE_MAX_IO);
+ ir_input_unregister(dev->idev);
+ kfree(dev->props);
+ kfree(dev);
+}
+
+/* enable wake on IR (wakes on specific button on original remote) */
+static void ene_enable_wake(struct ene_device *dev, int enable)
+{
+ enable = enable && device_may_wakeup(&dev->pnp_dev->dev);
+
+ ene_dbg("wake on IR %s", enable ? "enabled" : "disabled");
+
+ ene_hw_write_reg_mask(dev, ENE_FW1, enable ?
+ ENE_FW1_WAKE : 0, ENE_FW1_WAKE);
+}
+
+#ifdef CONFIG_PM
+static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_enable_wake(dev, 1);
+ return 0;
+}
+
+static int ene_resume(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ if (dev->in_use)
+ ene_rx_enable(dev);
+
+ ene_enable_wake(dev, 0);
+ return 0;
+}
+#endif
+
+static void ene_shutdown(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_enable_wake(dev, 1);
+}
+
+static const struct pnp_device_id ene_ids[] = {
+ {.id = "ENE0100",},
+ {.id = "ENE0200",},
+ {.id = "ENE0201",},
+ {.id = "ENE0202",},
+ {},
+};
+
+static struct pnp_driver ene_driver = {
+ .name = ENE_DRIVER_NAME,
+ .id_table = ene_ids,
+ .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+
+ .probe = ene_probe,
+ .remove = __devexit_p(ene_remove),
+#ifdef CONFIG_PM
+ .suspend = ene_suspend,
+ .resume = ene_resume,
+#endif
+ .shutdown = ene_shutdown,
+};
+
+static int __init ene_init(void)
+{
+ return pnp_register_driver(&ene_driver);
+}
+
+static void ene_exit(void)
+{
+ pnp_unregister_driver(&ene_driver);
+}
+
+module_param(sample_period, int, S_IRUGO);
+MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");
+
+module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_idle,
+ "Enables turning off signal sampling after long inactivity time; "
+ "if disabled might help detecting input signal (default: enabled)"
+ " (KB3926B only)");
+
+module_param(input, bool, S_IRUGO);
+MODULE_PARM_DESC(input, "select which input to use "
+ "0 - auto, 1 - standard, 2 - wideband(KB3926C+)");
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debug (debug=2 verbose debug output)");
+
+module_param(txsim, bool, S_IRUGO);
+MODULE_PARM_DESC(txsim,
+ "Simulate TX features on unsupported hardware (dangerous)");
+
+MODULE_DEVICE_TABLE(pnp, ene_ids);
+MODULE_DESCRIPTION
+ ("Infrared input driver for KB3926B/KB3926C/KB3926D "
+ "(aka ENE0100/ENE0200/ENE0201) CIR port");
+
+MODULE_AUTHOR("Maxim Levitsky");
+MODULE_LICENSE("GPL");
+
+module_init(ene_init);
+module_exit(ene_exit);
--- /dev/null
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/spinlock.h>
+
+
+/* hardware address */
+#define ENE_STATUS 0 /* hardware status - unused */
+#define ENE_ADDR_HI 1 /* hi byte of register address */
+#define ENE_ADDR_LO 2 /* low byte of register address */
+#define ENE_IO 3 /* read/write window */
+#define ENE_MAX_IO 4
+
+/* 8 bytes of samples, divided in 2 halfs*/
+#define ENE_SAMPLE_BUFFER 0xF8F0 /* regular sample buffer */
+#define ENE_SAMPLE_SPC_MASK 0x80 /* sample is space */
+#define ENE_SAMPLE_VALUE_MASK 0x7F
+#define ENE_SAMPLE_OVERFLOW 0x7F
+#define ENE_SAMPLES_SIZE 4
+
+/* fan input sample buffer */
+#define ENE_SAMPLE_BUFFER_FAN 0xF8FB /* this buffer holds high byte of */
+ /* each sample of normal buffer */
+#define ENE_FAN_SMPL_PULS_MSK 0x8000 /* this bit of combined sample */
+ /* if set, says that sample is pulse */
+#define ENE_FAN_VALUE_MASK 0x0FFF /* mask for valid bits of the value */
+
+/* first firmware register */
+#define ENE_FW1 0xF8F8
+#define ENE_FW1_ENABLE 0x01 /* enable fw processing */
+#define ENE_FW1_TXIRQ 0x02 /* TX interrupt pending */
+#define ENE_FW1_WAKE 0x40 /* enable wake from S3 */
+#define ENE_FW1_IRQ 0x80 /* enable interrupt */
+
+/* second firmware register */
+#define ENE_FW2 0xF8F9
+#define ENE_FW2_BUF_HIGH 0x01 /* which half of the buffer to read */
+#define ENE_FW2_IRQ_CLR 0x04 /* clear this on IRQ */
+#define ENE_FW2_GP40_AS_LEARN 0x08 /* normal input is used as */
+ /* learning input */
+#define ENE_FW2_FAN_AS_NRML_IN 0x40 /* fan is used as normal input */
+#define ENE_FW2_LEARNING 0x80 /* hardware supports learning and TX */
+
+/* transmitter ports */
+#define ENE_TX_PORT2 0xFC01 /* this enables one or both */
+#define ENE_TX_PORT2_EN 0x20 /* TX ports */
+#define ENE_TX_PORT1 0xFC08
+#define ENE_TX_PORT1_EN 0x02
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ 0xFD09 /* IRQ number */
+#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */
+#define ENEB_IRQ_STATUS 0xFD80 /* irq status */
+#define ENEB_IRQ_STATUS_IR 0x20 /* IR irq */
+
+/* fan as input settings - only if learning capable */
+#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN 0xCD
+#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN 0x03
+#define ENE_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */
+
+/* IRQ registers block (for revision C,D) */
+#define ENEC_IRQ 0xFE9B /* new irq settings register */
+#define ENEC_IRQ_MASK 0x0F /* irq number mask */
+#define ENEC_IRQ_UNK_EN 0x10 /* always enabled */
+#define ENEC_IRQ_STATUS 0x20 /* irq status and ACK */
+
+/* CIR block settings */
+#define ENE_CIR_CONF1 0xFEC0
+#define ENE_CIR_CONF1_TX_CLEAR 0x01 /* clear that on revC */
+ /* while transmitting */
+#define ENE_CIR_CONF1_RX_ON 0x07 /* normal receiver enabled */
+#define ENE_CIR_CONF1_LEARN1 0x08 /* enabled on learning mode */
+#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */
+#define ENE_CIR_CONF1_TX_CARR 0x80 /* send TX carrier or not */
+
+#define ENE_CIR_CONF2 0xFEC1 /* unknown setting = 0 */
+#define ENE_CIR_CONF2_LEARN2 0x10 /* set on enable learning */
+#define ENE_CIR_CONF2_GPIO40DIS 0x20 /* disable input via gpio40 */
+
+#define ENE_CIR_SAMPLE_PERIOD 0xFEC8 /* sample period in us */
+#define ENE_CIR_SAMPLE_OVERFLOW 0x80 /* interrupt on overflows if set */
+
+
+/* Two byte tx buffer */
+#define ENE_TX_INPUT1 0xFEC9
+#define ENE_TX_INPUT2 0xFECA
+#define ENE_TX_PULSE_MASK 0x80 /* Transmitted sample is pulse */
+#define ENE_TX_SMLP_MASK 0x7F
+#define ENE_TX_SMPL_PERIOD 50 /* transmit sample period - fixed */
+
+
+/* Unknown TX setting - TX sample period ??? */
+#define ENE_TX_UNK1 0xFECB /* set to 0x63 */
+
+/* Current received carrier period */
+#define ENE_RX_CARRIER 0xFECC /* RX period (500 ns) */
+#define ENE_RX_CARRIER_VALID 0x80 /* Register content valid */
+
+
+/* TX period (1/carrier) */
+#define ENE_TX_PERIOD 0xFECE /* TX period (500 ns) */
+#define ENE_TX_PERIOD_UNKBIT 0x80 /* This bit set on transmit*/
+#define ENE_TX_PERIOD_PULSE 0xFECF /* TX pulse period (500 ns)*/
+
+/* Hardware versions */
+#define ENE_HW_VERSION 0xFF00 /* hardware revision */
+#define ENE_PLLFRH 0xFF16
+#define ENE_PLLFRL 0xFF17
+
+#define ENE_HW_UNK 0xFF1D
+#define ENE_HW_UNK_CLR 0x04
+#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */
+#define ENE_HW_VER_MINOR 0xFF1F
+#define ENE_HW_VER_OLD 0xFD00
+
+/* Normal/Learning carrier ranges - only valid if we have learning input*/
+/* TODO: test */
+#define ENE_NORMAL_RX_LOW 34
+#define ENE_NORMAL_RX_HI 38
+
+/* Tx carrier range */
+/* Hardware might be able to do more, but this range is enough for
+ all purposes */
+#define ENE_TX_PERIOD_MAX 32 /* corresponds to 29.4 kHz */
+#define ENE_TX_PERIOD_MIN 16 /* corrsponds to 62.5 kHz */
+
+
+
+/* Minimal and maximal gaps */
+
+/* Normal case:
+ Minimal gap is 0x7F * sample period
+ Maximum gap depends on hardware.
+ For KB3926B, it is unlimited, for newer models its around
+ 250000, after which HW stops sending samples, and that is
+ not possible to change */
+
+/* Fan case:
+ Both minimal and maximal gaps are same, and equal to 0xFFF * 0x61
+ And there is nothing to change this setting
+*/
+
+#define ENE_MAXGAP 250000
+#define ENE_MINGAP (127 * sample_period)
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME "ene_ir"
+
+#define ENE_IRQ_RX 1
+#define ENE_IRQ_TX 2
+
+#define ENE_HW_B 1 /* 3926B */
+#define ENE_HW_C 2 /* 3926C */
+#define ENE_HW_D 3 /* 3926D */
+
+#define ene_printk(level, text, ...) \
+ printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
+
+#define ene_dbg(text, ...) \
+ if (debug) \
+ printk(KERN_DEBUG \
+ ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+#define ene_dbg_verbose(text, ...) \
+ if (debug > 1) \
+ printk(KERN_DEBUG \
+ ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+
+struct ene_device {
+ struct pnp_dev *pnp_dev;
+ struct input_dev *idev;
+ struct ir_dev_props *props;
+ int in_use;
+
+ /* hw IO settings */
+ unsigned long hw_io;
+ int irq;
+ spinlock_t hw_lock;
+
+ /* HW features */
+ int hw_revision; /* hardware revision */
+ bool hw_learning_and_tx_capable; /* learning capable */
+ bool hw_gpio40_learning; /* gpio40 is learning */
+ bool hw_fan_as_normal_input; /* fan input is used as */
+ /* regular input */
+ /* HW state*/
+ int rx_pointer; /* hw pointer to rx buffer */
+ bool rx_fan_input_inuse; /* is fan input in use for rx*/
+ int tx_reg; /* current reg used for TX */
+ u8 saved_conf1; /* saved FEC0 reg */
+
+ /* TX sample handling */
+ unsigned int tx_sample; /* current sample for TX */
+ bool tx_sample_pulse; /* current sample is pulse */
+
+ /* TX buffer */
+ int *tx_buffer; /* input samples buffer*/
+ int tx_pos; /* position in that bufer */
+ int tx_len; /* current len of tx buffer */
+ int tx_done; /* done transmitting */
+ /* one more sample pending*/
+ struct completion tx_complete; /* TX completion */
+ struct timer_list tx_sim_timer;
+
+ /* TX settings */
+ int tx_period;
+ int tx_duty_cycle;
+ int transmitter_mask;
+
+ /* RX settings */
+ bool learning_enabled; /* learning input enabled */
+ bool carrier_detect_enabled; /* carrier detect enabled */
+ int rx_period_adjust;
+};
struct imon_context {
struct device *dev;
struct ir_dev_props *props;
- struct ir_input_dev *ir;
/* Newer devices have two interfaces */
struct usb_device *usbdev_intf0;
struct usb_device *usbdev_intf1;
{
struct input_dev *idev;
struct ir_dev_props *props;
- struct ir_input_dev *ir;
int ret, i;
idev = input_allocate_device();
goto props_alloc_failed;
}
- ir = kzalloc(sizeof(struct ir_input_dev), GFP_KERNEL);
- if (!ir) {
- dev_err(ictx->dev, "remote ir input dev allocation failed\n");
- goto ir_dev_alloc_failed;
- }
-
snprintf(ictx->name_idev, sizeof(ictx->name_idev),
"iMON Remote (%04x:%04x)", ictx->vendor, ictx->product);
idev->name = ictx->name_idev;
props->change_protocol = imon_ir_change_protocol;
ictx->props = props;
- ictx->ir = ir;
- memcpy(&ir->dev, ictx->dev, sizeof(struct device));
-
usb_to_input_id(ictx->usbdev_intf0, &idev->id);
idev->dev.parent = ictx->dev;
- input_set_drvdata(idev, ir);
-
ret = ir_input_register(idev, RC_MAP_IMON_PAD, props, MOD_NAME);
if (ret < 0) {
dev_err(ictx->dev, "remote input dev register failed\n");
return idev;
idev_register_failed:
- kfree(ir);
-ir_dev_alloc_failed:
kfree(props);
props_alloc_failed:
input_free_device(idev);
urb_submit_failed:
ir_input_unregister(ictx->idev);
- input_free_device(ictx->idev);
idev_setup_failed:
find_endpoint_failed:
mutex_unlock(&ictx->lock);
return ictx;
urb_submit_failed:
- if (ictx->touch) {
+ if (ictx->touch)
input_unregister_device(ictx->touch);
- input_free_device(ictx->touch);
- }
touch_setup_failed:
find_endpoint_failed:
mutex_unlock(&ictx->lock);
struct ir_raw_event_ctrl {
struct list_head list; /* to keep track of raw clients */
- struct work_struct rx_work; /* for the rx decoding workqueue */
+ struct task_struct *thread;
struct kfifo kfifo; /* fifo for the pulse/space durations */
ktime_t last_event; /* when last event occurred */
enum raw_event_type last_type; /* last event type */
/* raw decoder state follows */
struct ir_raw_event prev_ev;
+ struct ir_raw_event this_ev;
struct nec_dec {
int state;
unsigned count;
u32 bits;
+ bool is_nec_x;
+ bool necx_repeat;
} nec;
struct rc5_dec {
int state;
struct lirc_codec {
struct ir_input_dev *ir_dev;
struct lirc_driver *drv;
- int lircdata;
+ int carrier_low;
} lirc;
};
ev->duration -= duration;
}
-#define TO_US(duration) (((duration) + 500) / 1000)
+#define TO_US(duration) DIV_ROUND_CLOSEST((duration), 1000)
#define TO_STR(is_pulse) ((is_pulse) ? "pulse" : "space")
#define IS_RESET(ev) (ev.duration == 0)
-
/*
* Routines from ir-sysfs.c - Meant to be called only internally inside
* ir-core
void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
void ir_raw_init(void);
-
+int ir_rcmap_init(void);
+void ir_rcmap_cleanup(void);
/*
* Decoder initialization code
*
STATE_BIT_SPACE,
STATE_TRAILER_PULSE,
STATE_TRAILER_SPACE,
+ STATE_CHECK_REPEAT,
};
/**
IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+again:
switch (data->state) {
case STATE_INACTIVE:
}
data->count = 0;
- data->state = STATE_BIT_PULSE;
+ data->state = STATE_CHECK_REPEAT;
return 0;
+
+ case STATE_CHECK_REPEAT:
+ if (!ev.pulse)
+ break;
+
+ if (eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
+ data->state = STATE_INACTIVE;
+ else
+ data->state = STATE_BIT_PULSE;
+ goto again;
}
out:
spin_lock_irqsave(&ir->keylock, flags);
+ input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
+
if (!ir->keypressed)
goto out;
spin_lock_irqsave(&ir->keylock, flags);
+ input_event(dev, EV_MSC, MSC_SCAN, scancode);
+
/* Repeat event? */
if (ir->keypressed &&
ir->last_scancode == scancode &&
ir->last_toggle = toggle;
ir->last_keycode = keycode;
+
if (keycode == KEY_RESERVED)
goto out;
+
/* Register a keypress */
ir->keypressed = true;
IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
*/
int __ir_input_register(struct input_dev *input_dev,
const struct ir_scancode_table *rc_tab,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name)
{
struct ir_input_dev *ir_dev;
set_bit(EV_KEY, input_dev->evbit);
set_bit(EV_REP, input_dev->evbit);
+ set_bit(EV_MSC, input_dev->evbit);
+ set_bit(MSC_SCAN, input_dev->mscbit);
if (ir_setkeytable(input_dev, &ir_dev->rc_tab, rc_tab)) {
rc = -ENOMEM;
IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
driver_name, rc_tab->name,
- ir_dev->props->driver_type == RC_DRIVER_IR_RAW ? " in raw mode" : "");
+ (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
+ " in raw mode" : "");
return 0;
static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ int sample;
if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
return 0;
if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
return -EINVAL;
+ if (IS_RESET(ev))
+ return 0;
+
IR_dprintk(2, "LIRC data transfer started (%uus %s)\n",
TO_US(ev.duration), TO_STR(ev.pulse));
- ir_dev->raw->lirc.lircdata += ev.duration / 1000;
+ sample = ev.duration / 1000;
if (ev.pulse)
- ir_dev->raw->lirc.lircdata |= PULSE_BIT;
+ sample |= PULSE_BIT;
lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
- (unsigned char *) &ir_dev->raw->lirc.lircdata);
+ (unsigned char *) &sample);
wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
- ir_dev->raw->lirc.lircdata = 0;
return 0;
}
return ret;
}
-static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
+ unsigned long __user arg)
{
struct lirc_codec *lirc;
struct ir_input_dev *ir_dev;
int ret = 0;
void *drv_data;
- unsigned long val;
+ unsigned long val = 0;
lirc = lirc_get_pdata(filep);
if (!lirc)
drv_data = ir_dev->props->priv;
- switch (cmd) {
- case LIRC_SET_TRANSMITTER_MASK:
+ if (_IOC_DIR(cmd) & _IOC_WRITE) {
ret = get_user(val, (unsigned long *)arg);
if (ret)
return ret;
+ }
+
+ switch (cmd) {
- if (ir_dev->props && ir_dev->props->s_tx_mask)
+ /* legacy support */
+ case LIRC_GET_SEND_MODE:
+ val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
+ break;
+
+ case LIRC_SET_SEND_MODE:
+ if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+ return -EINVAL;
+ break;
+
+ /* TX settings */
+ case LIRC_SET_TRANSMITTER_MASK:
+ if (ir_dev->props->s_tx_mask)
ret = ir_dev->props->s_tx_mask(drv_data, (u32)val);
else
return -EINVAL;
break;
case LIRC_SET_SEND_CARRIER:
- ret = get_user(val, (unsigned long *)arg);
- if (ret)
- return ret;
-
- if (ir_dev->props && ir_dev->props->s_tx_carrier)
+ if (ir_dev->props->s_tx_carrier)
ir_dev->props->s_tx_carrier(drv_data, (u32)val);
else
return -EINVAL;
break;
- case LIRC_GET_SEND_MODE:
- val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
- ret = put_user(val, (unsigned long *)arg);
+ case LIRC_SET_SEND_DUTY_CYCLE:
+ if (!ir_dev->props->s_tx_duty_cycle)
+ return -ENOSYS;
+
+ if (val <= 0 || val >= 100)
+ return -EINVAL;
+
+ ir_dev->props->s_tx_duty_cycle(ir_dev->props->priv, val);
break;
- case LIRC_SET_SEND_MODE:
- ret = get_user(val, (unsigned long *)arg);
- if (ret)
- return ret;
+ /* RX settings */
+ case LIRC_SET_REC_CARRIER:
+ if (ir_dev->props->s_rx_carrier_range)
+ ret = ir_dev->props->s_rx_carrier_range(
+ ir_dev->props->priv,
+ ir_dev->raw->lirc.carrier_low, val);
+ else
+ return -ENOSYS;
- if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+ if (!ret)
+ ir_dev->raw->lirc.carrier_low = 0;
+ break;
+
+ case LIRC_SET_REC_CARRIER_RANGE:
+ if (val >= 0)
+ ir_dev->raw->lirc.carrier_low = val;
+ break;
+
+
+ case LIRC_GET_REC_RESOLUTION:
+ val = ir_dev->props->rx_resolution;
+ break;
+
+ case LIRC_SET_WIDEBAND_RECEIVER:
+ if (ir_dev->props->s_learning_mode)
+ return ir_dev->props->s_learning_mode(
+ ir_dev->props->priv, !!val);
+ else
+ return -ENOSYS;
+
+ /* Generic timeout support */
+ case LIRC_GET_MIN_TIMEOUT:
+ if (!ir_dev->props->max_timeout)
+ return -ENOSYS;
+ val = ir_dev->props->min_timeout / 1000;
+ break;
+
+ case LIRC_GET_MAX_TIMEOUT:
+ if (!ir_dev->props->max_timeout)
+ return -ENOSYS;
+ val = ir_dev->props->max_timeout / 1000;
+ break;
+
+ case LIRC_SET_REC_TIMEOUT:
+ if (val < ir_dev->props->min_timeout ||
+ val > ir_dev->props->max_timeout)
return -EINVAL;
+ ir_dev->props->timeout = val * 1000;
break;
default:
return lirc_dev_fop_ioctl(filep, cmd, arg);
}
+ if (_IOC_DIR(cmd) & _IOC_READ)
+ ret = put_user(val, (unsigned long *)arg);
+
return ret;
}
features = LIRC_CAN_REC_MODE2;
if (ir_dev->props->tx_ir) {
+
features |= LIRC_CAN_SEND_PULSE;
if (ir_dev->props->s_tx_mask)
features |= LIRC_CAN_SET_TRANSMITTER_MASK;
if (ir_dev->props->s_tx_carrier)
features |= LIRC_CAN_SET_SEND_CARRIER;
+
+ if (ir_dev->props->s_tx_duty_cycle)
+ features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
}
+ if (ir_dev->props->s_rx_carrier_range)
+ features |= LIRC_CAN_SET_REC_CARRIER |
+ LIRC_CAN_SET_REC_CARRIER_RANGE;
+
+ if (ir_dev->props->s_learning_mode)
+ features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
+
+ if (ir_dev->props->max_timeout)
+ features |= LIRC_CAN_SET_REC_TIMEOUT;
+
+
snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
ir_dev->driver_name);
drv->minor = -1;
ir_dev->raw->lirc.drv = drv;
ir_dev->raw->lirc.ir_dev = ir_dev;
- ir_dev->raw->lirc.lircdata = PULSE_MASK;
-
return 0;
lirc_register_failed:
#define NEC_HEADER_PULSE (16 * NEC_UNIT)
#define NECX_HEADER_PULSE (8 * NEC_UNIT) /* Less common NEC variant */
#define NEC_HEADER_SPACE (8 * NEC_UNIT)
-#define NEC_REPEAT_SPACE (8 * NEC_UNIT)
+#define NEC_REPEAT_SPACE (4 * NEC_UNIT)
#define NEC_BIT_PULSE (1 * NEC_UNIT)
#define NEC_BIT_0_SPACE (1 * NEC_UNIT)
#define NEC_BIT_1_SPACE (3 * NEC_UNIT)
#define NEC_TRAILER_PULSE (1 * NEC_UNIT)
#define NEC_TRAILER_SPACE (10 * NEC_UNIT) /* even longer in reality */
+#define NECX_REPEAT_BITS 1
enum nec_state {
STATE_INACTIVE,
if (!ev.pulse)
break;
- if (!eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2) &&
- !eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+ if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2)) {
+ data->is_nec_x = false;
+ data->necx_repeat = false;
+ } else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+ data->is_nec_x = true;
+ else
break;
data->count = 0;
if (ev.pulse)
break;
+ if (data->necx_repeat && data->count == NECX_REPEAT_BITS &&
+ geq_margin(ev.duration,
+ NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
+ IR_dprintk(1, "Repeat last key\n");
+ ir_repeat(input_dev);
+ data->state = STATE_INACTIVE;
+ return 0;
+
+ } else if (data->count > NECX_REPEAT_BITS)
+ data->necx_repeat = false;
+
data->bits <<= 1;
if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2))
data->bits |= 1;
IR_dprintk(1, "NEC scancode 0x%04x\n", scancode);
}
+ if (data->is_nec_x)
+ data->necx_repeat = true;
+
ir_keydown(input_dev, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
* GNU General Public License for more details.
*/
-#include <linux/workqueue.h>
-#include <linux/spinlock.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
#include <linux/sched.h>
+#include <linux/freezer.h>
#include "ir-core-priv.h"
/* Define the max number of pulse/space transitions to buffer */
static LIST_HEAD(ir_raw_client_list);
/* Used to handle IR raw handler extensions */
-static DEFINE_SPINLOCK(ir_raw_handler_lock);
+static DEFINE_MUTEX(ir_raw_handler_lock);
static LIST_HEAD(ir_raw_handler_list);
static u64 available_protocols;
static struct work_struct wq_load;
#endif
-static void ir_raw_event_work(struct work_struct *work)
+static int ir_raw_event_thread(void *data)
{
struct ir_raw_event ev;
struct ir_raw_handler *handler;
- struct ir_raw_event_ctrl *raw =
- container_of(work, struct ir_raw_event_ctrl, rx_work);
-
- while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
- spin_lock(&ir_raw_handler_lock);
- list_for_each_entry(handler, &ir_raw_handler_list, list)
- handler->decode(raw->input_dev, ev);
- spin_unlock(&ir_raw_handler_lock);
- raw->prev_ev = ev;
+ struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
+
+ while (!kthread_should_stop()) {
+ try_to_freeze();
+
+ mutex_lock(&ir_raw_handler_lock);
+
+ while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
+ list_for_each_entry(handler, &ir_raw_handler_list, list)
+ handler->decode(raw->input_dev, ev);
+ raw->prev_ev = ev;
+ }
+
+ mutex_unlock(&ir_raw_handler_lock);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
}
+
+ return 0;
}
/**
if (!ir->raw)
return -EINVAL;
+ IR_dprintk(2, "sample: (05%dus %s)\n",
+ TO_US(ev->duration), TO_STR(ev->pulse));
+
if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
return -ENOMEM;
}
EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
+/**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev: the struct input_dev device descriptor
+ * @type: the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+ struct ir_raw_event *ev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+
+ if (!raw || !ir->props)
+ return -EINVAL;
+
+ /* Ignore spaces in idle mode */
+ if (ir->idle && !ev->pulse)
+ return 0;
+ else if (ir->idle)
+ ir_raw_event_set_idle(input_dev, 0);
+
+ if (!raw->this_ev.duration) {
+ raw->this_ev = *ev;
+ } else if (ev->pulse == raw->this_ev.pulse) {
+ raw->this_ev.duration += ev->duration;
+ } else {
+ ir_raw_event_store(input_dev, &raw->this_ev);
+ raw->this_ev = *ev;
+ }
+
+ /* Enter idle mode if nessesary */
+ if (!ev->pulse && ir->props->timeout &&
+ raw->this_ev.duration >= ir->props->timeout)
+ ir_raw_event_set_idle(input_dev, 1);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+ ktime_t now;
+ u64 delta;
+
+ if (!ir->props)
+ return;
+
+ if (!ir->raw)
+ goto out;
+
+ if (idle) {
+ IR_dprintk(2, "enter idle mode\n");
+ raw->last_event = ktime_get();
+ } else {
+ IR_dprintk(2, "exit idle mode\n");
+
+ now = ktime_get();
+ delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+ WARN_ON(raw->this_ev.pulse);
+
+ raw->this_ev.duration =
+ min(raw->this_ev.duration + delta,
+ (u64)IR_MAX_DURATION);
+
+ ir_raw_event_store(input_dev, &raw->this_ev);
+
+ if (raw->this_ev.duration == IR_MAX_DURATION)
+ ir_raw_event_reset(input_dev);
+
+ raw->this_ev.duration = 0;
+ }
+out:
+ if (ir->props->s_idle)
+ ir->props->s_idle(ir->props->priv, idle);
+ ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
/**
* ir_raw_event_handle() - schedules the decoding of stored ir data
* @input_dev: the struct input_dev device descriptor
if (!ir->raw)
return;
- schedule_work(&ir->raw->rx_work);
+ wake_up_process(ir->raw->thread);
}
EXPORT_SYMBOL_GPL(ir_raw_event_handle);
ir_raw_get_allowed_protocols()
{
u64 protocols;
- spin_lock(&ir_raw_handler_lock);
+ mutex_lock(&ir_raw_handler_lock);
protocols = available_protocols;
- spin_unlock(&ir_raw_handler_lock);
+ mutex_unlock(&ir_raw_handler_lock);
return protocols;
}
return -ENOMEM;
ir->raw->input_dev = input_dev;
- INIT_WORK(&ir->raw->rx_work, ir_raw_event_work);
+
ir->raw->enabled_protocols = ~0;
rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
GFP_KERNEL);
return rc;
}
- spin_lock(&ir_raw_handler_lock);
+ ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
+ "rc%u", (unsigned int)ir->devno);
+
+ if (IS_ERR(ir->raw->thread)) {
+ kfree(ir->raw);
+ ir->raw = NULL;
+ return PTR_ERR(ir->raw->thread);
+ }
+
+ mutex_lock(&ir_raw_handler_lock);
list_add_tail(&ir->raw->list, &ir_raw_client_list);
list_for_each_entry(handler, &ir_raw_handler_list, list)
if (handler->raw_register)
handler->raw_register(ir->raw->input_dev);
- spin_unlock(&ir_raw_handler_lock);
+ mutex_unlock(&ir_raw_handler_lock);
return 0;
}
if (!ir->raw)
return;
- cancel_work_sync(&ir->raw->rx_work);
+ kthread_stop(ir->raw->thread);
- spin_lock(&ir_raw_handler_lock);
+ mutex_lock(&ir_raw_handler_lock);
list_del(&ir->raw->list);
list_for_each_entry(handler, &ir_raw_handler_list, list)
if (handler->raw_unregister)
handler->raw_unregister(ir->raw->input_dev);
- spin_unlock(&ir_raw_handler_lock);
+ mutex_unlock(&ir_raw_handler_lock);
kfifo_free(&ir->raw->kfifo);
kfree(ir->raw);
{
struct ir_raw_event_ctrl *raw;
- spin_lock(&ir_raw_handler_lock);
+ mutex_lock(&ir_raw_handler_lock);
list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
if (ir_raw_handler->raw_register)
list_for_each_entry(raw, &ir_raw_client_list, list)
ir_raw_handler->raw_register(raw->input_dev);
available_protocols |= ir_raw_handler->protocols;
- spin_unlock(&ir_raw_handler_lock);
+ mutex_unlock(&ir_raw_handler_lock);
return 0;
}
{
struct ir_raw_event_ctrl *raw;
- spin_lock(&ir_raw_handler_lock);
+ mutex_lock(&ir_raw_handler_lock);
list_del(&ir_raw_handler->list);
if (ir_raw_handler->raw_unregister)
list_for_each_entry(raw, &ir_raw_client_list, list)
ir_raw_handler->raw_unregister(raw->input_dev);
available_protocols &= ~ir_raw_handler->protocols;
- spin_unlock(&ir_raw_handler_lock);
+ mutex_unlock(&ir_raw_handler_lock);
}
EXPORT_SYMBOL(ir_raw_handler_unregister);
/* Initialize/load the decoders/keymap code that will be used */
ir_raw_init();
+ ir_rcmap_init();
return 0;
}
static void __exit ir_core_exit(void)
{
class_unregister(&ir_input_class);
+ ir_rcmap_cleanup();
}
module_init(ir_core_init);
rc-dm1105-nec.o \
rc-dntv-live-dvb-t.o \
rc-dntv-live-dvbt-pro.o \
- rc-empty.o \
rc-em-terratec.o \
rc-encore-enltv2.o \
rc-encore-enltv.o \
rc-purpletv.o \
rc-pv951.o \
rc-rc5-hauppauge-new.o \
+ rc-rc5-streamzap.o \
rc-rc5-tv.o \
rc-rc6-mce.o \
rc-real-audio-220-32-keys.o \
+++ /dev/null
-/* empty.h - Keytable for empty Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* empty keytable, can be used as placeholder for not-yet created keytables */
-
-static struct ir_scancode empty[] = {
- { 0x2a, KEY_COFFEE },
-};
-
-static struct rc_keymap empty_map = {
- .map = {
- .scan = empty,
- .size = ARRAY_SIZE(empty),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_EMPTY,
- }
-};
-
-static int __init init_rc_map_empty(void)
-{
- return ir_register_map(&empty_map);
-}
-
-static void __exit exit_rc_map_empty(void)
-{
- ir_unregister_map(&empty_map);
-}
-
-module_init(init_rc_map_empty)
-module_exit(exit_rc_map_empty)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* rc-rc5-streamzap.c - Keytable for Streamzap PC Remote, for use
+ * with the Streamzap PC Remote IR Receiver.
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode rc5_streamzap[] = {
+/*
+ * FIXME: The Streamzap remote isn't actually true RC-5, it has an extra
+ * bit in it, which presently throws the in-kernel RC-5 decoder for a loop.
+ * We either have to enhance the decoder to support it, add a new decoder,
+ * or just rely on lirc userspace decoding.
+ */
+ { 0x00, KEY_NUMERIC_0 },
+ { 0x01, KEY_NUMERIC_1 },
+ { 0x02, KEY_NUMERIC_2 },
+ { 0x03, KEY_NUMERIC_3 },
+ { 0x04, KEY_NUMERIC_4 },
+ { 0x05, KEY_NUMERIC_5 },
+ { 0x06, KEY_NUMERIC_6 },
+ { 0x07, KEY_NUMERIC_7 },
+ { 0x08, KEY_NUMERIC_8 },
+ { 0x0a, KEY_POWER },
+ { 0x0b, KEY_MUTE },
+ { 0x0c, KEY_CHANNELUP },
+ { 0x0d, KEY_VOLUMEUP },
+ { 0x0e, KEY_CHANNELDOWN },
+ { 0x0f, KEY_VOLUMEDOWN },
+ { 0x10, KEY_UP },
+ { 0x11, KEY_LEFT },
+ { 0x12, KEY_OK },
+ { 0x13, KEY_RIGHT },
+ { 0x14, KEY_DOWN },
+ { 0x15, KEY_MENU },
+ { 0x16, KEY_EXIT },
+ { 0x17, KEY_PLAY },
+ { 0x18, KEY_PAUSE },
+ { 0x19, KEY_STOP },
+ { 0x1a, KEY_BACK },
+ { 0x1b, KEY_FORWARD },
+ { 0x1c, KEY_RECORD },
+ { 0x1d, KEY_REWIND },
+ { 0x1e, KEY_FASTFORWARD },
+ { 0x20, KEY_RED },
+ { 0x21, KEY_GREEN },
+ { 0x22, KEY_YELLOW },
+ { 0x23, KEY_BLUE },
+
+};
+
+static struct rc_keymap rc5_streamzap_map = {
+ .map = {
+ .scan = rc5_streamzap,
+ .size = ARRAY_SIZE(rc5_streamzap),
+ .ir_type = IR_TYPE_RC5,
+ .name = RC_MAP_RC5_STREAMZAP,
+ }
+};
+
+static int __init init_rc_map_rc5_streamzap(void)
+{
+ return ir_register_map(&rc5_streamzap_map);
+}
+
+static void __exit exit_rc_map_rc5_streamzap(void)
+{
+ ir_unregister_map(&rc5_streamzap_map);
+}
+
+module_init(init_rc_map_rc5_streamzap)
+module_exit(exit_rc_map_rc5_streamzap)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
{ 0x800f045a, KEY_SUBTITLE }, /* Caption/Teletext */
{ 0x800f044d, KEY_TITLE },
+ { 0x800f044e, KEY_PRINT }, /* Print - HP OEM version of remote */
+
{ 0x800f040c, KEY_POWER },
{ 0x800f040d, KEY_PROG1 }, /* Windows MCE button */
/* data structure for each usb transceiver */
struct mceusb_dev {
/* ir-core bits */
- struct ir_input_dev *irdev;
struct ir_dev_props *props;
struct ir_raw_event rawir;
}
}
-static void usb_async_callback(struct urb *urb, struct pt_regs *regs)
+static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
{
struct mceusb_dev *ir;
int len;
/* outbound data */
usb_fill_int_urb(async_urb, ir->usbdev,
usb_sndintpipe(ir->usbdev, ep->bEndpointAddress),
- async_buf, size, (usb_complete_t) usb_async_callback,
+ async_buf, size, (usb_complete_t)mce_async_callback,
ir, ep->bInterval);
memcpy(async_buf, data, size);
if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
ir->send_flags = SEND_FLAG_COMPLETE;
- dev_dbg(&ir->irdev->dev, "setup answer received %d bytes\n",
+ dev_dbg(ir->dev, "setup answer received %d bytes\n",
buf_len);
}
{
struct input_dev *idev;
struct ir_dev_props *props;
- struct ir_input_dev *irdev;
struct device *dev = ir->dev;
int ret = -ENODEV;
goto props_alloc_failed;
}
- irdev = kzalloc(sizeof(struct ir_input_dev), GFP_KERNEL);
- if (!irdev) {
- dev_err(dev, "remote ir input dev allocation failed\n");
- goto ir_dev_alloc_failed;
- }
-
snprintf(ir->name, sizeof(ir->name), "Media Center Ed. eHome "
"Infrared Remote Transceiver (%04x:%04x)",
le16_to_cpu(ir->usbdev->descriptor.idVendor),
props->tx_ir = mceusb_tx_ir;
ir->props = props;
- ir->irdev = irdev;
-
- input_set_drvdata(idev, irdev);
ret = ir_input_register(idev, RC_MAP_RC6_MCE, props, DRIVER_NAME);
if (ret < 0) {
return idev;
irdev_failed:
- kfree(irdev);
-ir_dev_alloc_failed:
kfree(props);
props_alloc_failed:
input_free_device(idev);
struct usb_endpoint_descriptor *ep = NULL;
struct usb_endpoint_descriptor *ep_in = NULL;
struct usb_endpoint_descriptor *ep_out = NULL;
- struct usb_host_config *config;
struct mceusb_dev *ir = NULL;
int pipe, maxp, i;
char buf[63], name[128] = "";
dev_dbg(&intf->dev, ": %s called\n", __func__);
- config = dev->actconfig;
idesc = intf->cur_altsetting;
is_gen3 = usb_match_id(intf, gen3_list) ? 1 : 0;
}
EXPORT_SYMBOL_GPL(ir_unregister_map);
+
+static struct ir_scancode empty[] = {
+ { 0x2a, KEY_COFFEE },
+};
+
+static struct rc_keymap empty_map = {
+ .map = {
+ .scan = empty,
+ .size = ARRAY_SIZE(empty),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_EMPTY,
+ }
+};
+
+int ir_rcmap_init(void)
+{
+ return ir_register_map(&empty_map);
+}
+
+void ir_rcmap_cleanup(void)
+{
+ ir_unregister_map(&empty_map);
+}
--- /dev/null
+/*
+ * Streamzap Remote Control driver
+ *
+ * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
+ * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
+ *
+ * This driver was based on the work of Greg Wickham and Adrian
+ * Dewhurst. It was substantially rewritten to support correct signal
+ * gaps and now maintains a delay buffer, which is used to present
+ * consistent timing behaviour to user space applications. Without the
+ * delay buffer an ugly hack would be required in lircd, which can
+ * cause sluggish signal decoding in certain situations.
+ *
+ * Ported to in-kernel ir-core interface by Jarod Wilson
+ *
+ * This driver is based on the USB skeleton driver packaged with the
+ * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+
+#define DRIVER_VERSION "1.60"
+#define DRIVER_NAME "streamzap"
+#define DRIVER_DESC "Streamzap Remote Control driver"
+
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+#define USB_STREAMZAP_VENDOR_ID 0x0e9c
+#define USB_STREAMZAP_PRODUCT_ID 0x0000
+
+/* table of devices that work with this driver */
+static struct usb_device_id streamzap_table[] = {
+ /* Streamzap Remote Control */
+ { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
+ /* Terminating entry */
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, streamzap_table);
+
+#define STREAMZAP_PULSE_MASK 0xf0
+#define STREAMZAP_SPACE_MASK 0x0f
+#define STREAMZAP_TIMEOUT 0xff
+#define STREAMZAP_RESOLUTION 256
+
+/* number of samples buffered */
+#define SZ_BUF_LEN 128
+
+enum StreamzapDecoderState {
+ PulseSpace,
+ FullPulse,
+ FullSpace,
+ IgnorePulse
+};
+
+/* structure to hold our device specific stuff */
+struct streamzap_ir {
+
+ /* ir-core */
+ struct ir_dev_props *props;
+ struct ir_raw_event rawir;
+
+ /* core device info */
+ struct device *dev;
+ struct input_dev *idev;
+
+ /* usb */
+ struct usb_device *usbdev;
+ struct usb_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct urb *urb_in;
+
+ /* buffer & dma */
+ unsigned char *buf_in;
+ dma_addr_t dma_in;
+ unsigned int buf_in_len;
+
+ /* timer used to support delay buffering */
+ struct timer_list delay_timer;
+ bool timer_running;
+ spinlock_t timer_lock;
+ struct timer_list flush_timer;
+ bool flush;
+
+ /* delay buffer */
+ struct kfifo fifo;
+ bool fifo_initialized;
+
+ /* track what state we're in */
+ enum StreamzapDecoderState decoder_state;
+ /* tracks whether we are currently receiving some signal */
+ bool idle;
+ /* sum of signal lengths received since signal start */
+ unsigned long sum;
+ /* start time of signal; necessary for gap tracking */
+ struct timeval signal_last;
+ struct timeval signal_start;
+ /* bool timeout_enabled; */
+
+ char name[128];
+ char phys[64];
+};
+
+
+/* local function prototypes */
+static int streamzap_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+static void streamzap_disconnect(struct usb_interface *interface);
+static void streamzap_callback(struct urb *urb);
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
+static int streamzap_resume(struct usb_interface *intf);
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver streamzap_driver = {
+ .name = DRIVER_NAME,
+ .probe = streamzap_probe,
+ .disconnect = streamzap_disconnect,
+ .suspend = streamzap_suspend,
+ .resume = streamzap_resume,
+ .id_table = streamzap_table,
+};
+
+static void streamzap_stop_timer(struct streamzap_ir *sz)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&sz->timer_lock, flags);
+ if (sz->timer_running) {
+ sz->timer_running = false;
+ spin_unlock_irqrestore(&sz->timer_lock, flags);
+ del_timer_sync(&sz->delay_timer);
+ } else {
+ spin_unlock_irqrestore(&sz->timer_lock, flags);
+ }
+}
+
+static void streamzap_flush_timeout(unsigned long arg)
+{
+ struct streamzap_ir *sz = (struct streamzap_ir *)arg;
+
+ dev_info(sz->dev, "%s: callback firing\n", __func__);
+
+ /* finally start accepting data */
+ sz->flush = false;
+}
+
+static void streamzap_delay_timeout(unsigned long arg)
+{
+ struct streamzap_ir *sz = (struct streamzap_ir *)arg;
+ struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+ unsigned long flags;
+ int len, ret;
+ static unsigned long delay;
+ bool wake = false;
+
+ /* deliver data every 10 ms */
+ delay = msecs_to_jiffies(10);
+
+ spin_lock_irqsave(&sz->timer_lock, flags);
+
+ if (kfifo_len(&sz->fifo) > 0) {
+ ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+ if (ret != sizeof(rawir))
+ dev_err(sz->dev, "Problem w/kfifo_out...\n");
+ ir_raw_event_store(sz->idev, &rawir);
+ wake = true;
+ }
+
+ len = kfifo_len(&sz->fifo);
+ if (len > 0) {
+ while ((len < SZ_BUF_LEN / 2) &&
+ (len < SZ_BUF_LEN * sizeof(int))) {
+ ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+ if (ret != sizeof(rawir))
+ dev_err(sz->dev, "Problem w/kfifo_out...\n");
+ ir_raw_event_store(sz->idev, &rawir);
+ wake = true;
+ len = kfifo_len(&sz->fifo);
+ }
+ if (sz->timer_running)
+ mod_timer(&sz->delay_timer, jiffies + delay);
+
+ } else {
+ sz->timer_running = false;
+ }
+
+ if (wake)
+ ir_raw_event_handle(sz->idev);
+
+ spin_unlock_irqrestore(&sz->timer_lock, flags);
+}
+
+static void streamzap_flush_delay_buffer(struct streamzap_ir *sz)
+{
+ struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+ bool wake = false;
+ int ret;
+
+ while (kfifo_len(&sz->fifo) > 0) {
+ ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+ if (ret != sizeof(rawir))
+ dev_err(sz->dev, "Problem w/kfifo_out...\n");
+ ir_raw_event_store(sz->idev, &rawir);
+ wake = true;
+ }
+
+ if (wake)
+ ir_raw_event_handle(sz->idev);
+}
+
+static void sz_push(struct streamzap_ir *sz)
+{
+ struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&sz->timer_lock, flags);
+ if (kfifo_len(&sz->fifo) >= sizeof(int) * SZ_BUF_LEN) {
+ ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+ if (ret != sizeof(rawir))
+ dev_err(sz->dev, "Problem w/kfifo_out...\n");
+ ir_raw_event_store(sz->idev, &rawir);
+ }
+
+ kfifo_in(&sz->fifo, &sz->rawir, sizeof(rawir));
+
+ if (!sz->timer_running) {
+ sz->delay_timer.expires = jiffies + (HZ / 10);
+ add_timer(&sz->delay_timer);
+ sz->timer_running = true;
+ }
+
+ spin_unlock_irqrestore(&sz->timer_lock, flags);
+}
+
+static void sz_push_full_pulse(struct streamzap_ir *sz,
+ unsigned char value)
+{
+ if (sz->idle) {
+ long deltv;
+
+ sz->signal_last = sz->signal_start;
+ do_gettimeofday(&sz->signal_start);
+
+ deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
+ sz->rawir.pulse = false;
+ if (deltv > 15) {
+ /* really long time */
+ sz->rawir.duration = IR_MAX_DURATION;
+ } else {
+ sz->rawir.duration = (int)(deltv * 1000000 +
+ sz->signal_start.tv_usec -
+ sz->signal_last.tv_usec);
+ sz->rawir.duration -= sz->sum;
+ sz->rawir.duration *= 1000;
+ sz->rawir.duration &= IR_MAX_DURATION;
+ }
+ dev_dbg(sz->dev, "ls %u\n", sz->rawir.duration);
+ sz_push(sz);
+
+ sz->idle = 0;
+ sz->sum = 0;
+ }
+
+ sz->rawir.pulse = true;
+ sz->rawir.duration = ((int) value) * STREAMZAP_RESOLUTION;
+ sz->rawir.duration += STREAMZAP_RESOLUTION / 2;
+ sz->sum += sz->rawir.duration;
+ sz->rawir.duration *= 1000;
+ sz->rawir.duration &= IR_MAX_DURATION;
+ dev_dbg(sz->dev, "p %u\n", sz->rawir.duration);
+ sz_push(sz);
+}
+
+static void sz_push_half_pulse(struct streamzap_ir *sz,
+ unsigned char value)
+{
+ sz_push_full_pulse(sz, (value & STREAMZAP_PULSE_MASK) >> 4);
+}
+
+static void sz_push_full_space(struct streamzap_ir *sz,
+ unsigned char value)
+{
+ sz->rawir.pulse = false;
+ sz->rawir.duration = ((int) value) * STREAMZAP_RESOLUTION;
+ sz->rawir.duration += STREAMZAP_RESOLUTION / 2;
+ sz->sum += sz->rawir.duration;
+ sz->rawir.duration *= 1000;
+ dev_dbg(sz->dev, "s %u\n", sz->rawir.duration);
+ sz_push(sz);
+}
+
+static void sz_push_half_space(struct streamzap_ir *sz,
+ unsigned long value)
+{
+ sz_push_full_space(sz, value & STREAMZAP_SPACE_MASK);
+}
+
+/**
+ * streamzap_callback - usb IRQ handler callback
+ *
+ * This procedure is invoked on reception of data from
+ * the usb remote.
+ */
+static void streamzap_callback(struct urb *urb)
+{
+ struct streamzap_ir *sz;
+ unsigned int i;
+ int len;
+ #if 0
+ static int timeout = (((STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION) &
+ IR_MAX_DURATION) | 0x03000000);
+ #endif
+
+ if (!urb)
+ return;
+
+ sz = urb->context;
+ len = urb->actual_length;
+
+ switch (urb->status) {
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /*
+ * this urb is terminated, clean up.
+ * sz might already be invalid at this point
+ */
+ dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
+ return;
+ default:
+ break;
+ }
+
+ dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
+ if (!sz->flush) {
+ for (i = 0; i < urb->actual_length; i++) {
+ dev_dbg(sz->dev, "%d: %x\n", i,
+ (unsigned char)sz->buf_in[i]);
+ switch (sz->decoder_state) {
+ case PulseSpace:
+ if ((sz->buf_in[i] & STREAMZAP_PULSE_MASK) ==
+ STREAMZAP_PULSE_MASK) {
+ sz->decoder_state = FullPulse;
+ continue;
+ } else if ((sz->buf_in[i] & STREAMZAP_SPACE_MASK)
+ == STREAMZAP_SPACE_MASK) {
+ sz_push_half_pulse(sz, sz->buf_in[i]);
+ sz->decoder_state = FullSpace;
+ continue;
+ } else {
+ sz_push_half_pulse(sz, sz->buf_in[i]);
+ sz_push_half_space(sz, sz->buf_in[i]);
+ }
+ break;
+ case FullPulse:
+ sz_push_full_pulse(sz, sz->buf_in[i]);
+ sz->decoder_state = IgnorePulse;
+ break;
+ case FullSpace:
+ if (sz->buf_in[i] == STREAMZAP_TIMEOUT) {
+ sz->idle = 1;
+ streamzap_stop_timer(sz);
+ #if 0
+ if (sz->timeout_enabled) {
+ sz->rawir.pulse = false;
+ sz->rawir.duration = timeout;
+ sz->rawir.duration *= 1000;
+ sz_push(sz);
+ }
+ #endif
+ streamzap_flush_delay_buffer(sz);
+ } else
+ sz_push_full_space(sz, sz->buf_in[i]);
+ sz->decoder_state = PulseSpace;
+ break;
+ case IgnorePulse:
+ if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK) ==
+ STREAMZAP_SPACE_MASK) {
+ sz->decoder_state = FullSpace;
+ continue;
+ }
+ sz_push_half_space(sz, sz->buf_in[i]);
+ sz->decoder_state = PulseSpace;
+ break;
+ }
+ }
+ }
+
+ usb_submit_urb(urb, GFP_ATOMIC);
+
+ return;
+}
+
+static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
+{
+ struct input_dev *idev;
+ struct ir_dev_props *props;
+ struct device *dev = sz->dev;
+ int ret;
+
+ idev = input_allocate_device();
+ if (!idev) {
+ dev_err(dev, "remote input dev allocation failed\n");
+ goto idev_alloc_failed;
+ }
+
+ props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+ if (!props) {
+ dev_err(dev, "remote ir dev props allocation failed\n");
+ goto props_alloc_failed;
+ }
+
+ snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
+ "Receiver (%04x:%04x)",
+ le16_to_cpu(sz->usbdev->descriptor.idVendor),
+ le16_to_cpu(sz->usbdev->descriptor.idProduct));
+
+ idev->name = sz->name;
+ usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
+ strlcat(sz->phys, "/input0", sizeof(sz->phys));
+ idev->phys = sz->phys;
+
+ props->priv = sz;
+ props->driver_type = RC_DRIVER_IR_RAW;
+ /* FIXME: not sure about supported protocols, check on this */
+ props->allowed_protos = IR_TYPE_RC5 | IR_TYPE_RC6;
+
+ sz->props = props;
+
+ ret = ir_input_register(idev, RC_MAP_RC5_STREAMZAP, props, DRIVER_NAME);
+ if (ret < 0) {
+ dev_err(dev, "remote input device register failed\n");
+ goto irdev_failed;
+ }
+
+ return idev;
+
+irdev_failed:
+ kfree(props);
+props_alloc_failed:
+ input_free_device(idev);
+idev_alloc_failed:
+ return NULL;
+}
+
+static int streamzap_delay_buf_init(struct streamzap_ir *sz)
+{
+ int ret;
+
+ ret = kfifo_alloc(&sz->fifo, sizeof(int) * SZ_BUF_LEN,
+ GFP_KERNEL);
+ if (ret == 0)
+ sz->fifo_initialized = 1;
+
+ return ret;
+}
+
+static void streamzap_start_flush_timer(struct streamzap_ir *sz)
+{
+ sz->flush_timer.expires = jiffies + HZ;
+ sz->flush = true;
+ add_timer(&sz->flush_timer);
+
+ sz->urb_in->dev = sz->usbdev;
+ if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
+ dev_err(sz->dev, "urb submit failed\n");
+}
+
+/**
+ * streamzap_probe
+ *
+ * Called by usb-core to associated with a candidate device
+ * On any failure the return value is the ERROR
+ * On success return 0
+ */
+static int __devinit streamzap_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct usb_host_interface *iface_host;
+ struct streamzap_ir *sz = NULL;
+ char buf[63], name[128] = "";
+ int retval = -ENOMEM;
+ int pipe, maxp;
+
+ /* Allocate space for device driver specific data */
+ sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
+ if (!sz)
+ return -ENOMEM;
+
+ sz->usbdev = usbdev;
+ sz->interface = intf;
+
+ /* Check to ensure endpoint information matches requirements */
+ iface_host = intf->cur_altsetting;
+
+ if (iface_host->desc.bNumEndpoints != 1) {
+ dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
+ __func__, iface_host->desc.bNumEndpoints);
+ retval = -ENODEV;
+ goto free_sz;
+ }
+
+ sz->endpoint = &(iface_host->endpoint[0].desc);
+ if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ != USB_DIR_IN) {
+ dev_err(&intf->dev, "%s: endpoint doesn't match input device "
+ "02%02x\n", __func__, sz->endpoint->bEndpointAddress);
+ retval = -ENODEV;
+ goto free_sz;
+ }
+
+ if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ != USB_ENDPOINT_XFER_INT) {
+ dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
+ "02%02x\n", __func__, sz->endpoint->bmAttributes);
+ retval = -ENODEV;
+ goto free_sz;
+ }
+
+ pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
+
+ if (maxp == 0) {
+ dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
+ __func__);
+ retval = -ENODEV;
+ goto free_sz;
+ }
+
+ /* Allocate the USB buffer and IRQ URB */
+ sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
+ if (!sz->buf_in)
+ goto free_sz;
+
+ sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+ if (!sz->urb_in)
+ goto free_buf_in;
+
+ sz->dev = &intf->dev;
+ sz->buf_in_len = maxp;
+
+ if (usbdev->descriptor.iManufacturer
+ && usb_string(usbdev, usbdev->descriptor.iManufacturer,
+ buf, sizeof(buf)) > 0)
+ strlcpy(name, buf, sizeof(name));
+
+ if (usbdev->descriptor.iProduct
+ && usb_string(usbdev, usbdev->descriptor.iProduct,
+ buf, sizeof(buf)) > 0)
+ snprintf(name + strlen(name), sizeof(name) - strlen(name),
+ " %s", buf);
+
+ retval = streamzap_delay_buf_init(sz);
+ if (retval) {
+ dev_err(&intf->dev, "%s: delay buffer init failed\n", __func__);
+ goto free_urb_in;
+ }
+
+ sz->idev = streamzap_init_input_dev(sz);
+ if (!sz->idev)
+ goto input_dev_fail;
+
+ sz->idle = true;
+ sz->decoder_state = PulseSpace;
+ #if 0
+ /* not yet supported, depends on patches from maxim */
+ /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
+ sz->timeout_enabled = false;
+ sz->min_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION * 1000;
+ sz->max_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION * 1000;
+ #endif
+
+ init_timer(&sz->delay_timer);
+ sz->delay_timer.function = streamzap_delay_timeout;
+ sz->delay_timer.data = (unsigned long)sz;
+ spin_lock_init(&sz->timer_lock);
+
+ init_timer(&sz->flush_timer);
+ sz->flush_timer.function = streamzap_flush_timeout;
+ sz->flush_timer.data = (unsigned long)sz;
+
+ do_gettimeofday(&sz->signal_start);
+
+ /* Complete final initialisations */
+ usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
+ maxp, (usb_complete_t)streamzap_callback,
+ sz, sz->endpoint->bInterval);
+ sz->urb_in->transfer_dma = sz->dma_in;
+ sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ usb_set_intfdata(intf, sz);
+
+ streamzap_start_flush_timer(sz);
+
+ dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
+ usbdev->bus->busnum, usbdev->devnum);
+
+ return 0;
+
+input_dev_fail:
+ kfifo_free(&sz->fifo);
+free_urb_in:
+ usb_free_urb(sz->urb_in);
+free_buf_in:
+ usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
+free_sz:
+ kfree(sz);
+
+ return retval;
+}
+
+/**
+ * streamzap_disconnect
+ *
+ * Called by the usb core when the device is removed from the system.
+ *
+ * This routine guarantees that the driver will not submit any more urbs
+ * by clearing dev->usbdev. It is also supposed to terminate any currently
+ * active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(),
+ * does not provide any way to do this.
+ */
+static void streamzap_disconnect(struct usb_interface *interface)
+{
+ struct streamzap_ir *sz = usb_get_intfdata(interface);
+ struct usb_device *usbdev = interface_to_usbdev(interface);
+
+ usb_set_intfdata(interface, NULL);
+
+ if (!sz)
+ return;
+
+ if (sz->flush) {
+ sz->flush = false;
+ del_timer_sync(&sz->flush_timer);
+ }
+
+ streamzap_stop_timer(sz);
+
+ sz->usbdev = NULL;
+ ir_input_unregister(sz->idev);
+ usb_kill_urb(sz->urb_in);
+ usb_free_urb(sz->urb_in);
+ usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
+
+ kfree(sz);
+}
+
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct streamzap_ir *sz = usb_get_intfdata(intf);
+
+ if (sz->flush) {
+ sz->flush = false;
+ del_timer_sync(&sz->flush_timer);
+ }
+
+ streamzap_stop_timer(sz);
+
+ usb_kill_urb(sz->urb_in);
+
+ return 0;
+}
+
+static int streamzap_resume(struct usb_interface *intf)
+{
+ struct streamzap_ir *sz = usb_get_intfdata(intf);
+
+ if (sz->fifo_initialized)
+ kfifo_reset(&sz->fifo);
+
+ sz->flush_timer.expires = jiffies + HZ;
+ sz->flush = true;
+ add_timer(&sz->flush_timer);
+
+ if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
+ dev_err(sz->dev, "Error sumbiting urb\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * streamzap_init
+ */
+static int __init streamzap_init(void)
+{
+ int ret;
+
+ /* register this driver with the USB subsystem */
+ ret = usb_register(&streamzap_driver);
+ if (ret < 0)
+ printk(KERN_ERR DRIVER_NAME ": usb register failed, "
+ "result = %d\n", ret);
+
+ return ret;
+}
+
+/**
+ * streamzap_exit
+ */
+static void __exit streamzap_exit(void)
+{
+ usb_deregister(&streamzap_driver);
+}
+
+
+module_init(streamzap_init);
+module_exit(streamzap_exit);
+
+MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
menuconfig MEDIA_TUNER_CUSTOMISE
bool "Customize analog and hybrid tuner modules to build"
depends on MEDIA_TUNER
- default n
+ default y if EMBEDDED
help
This allows the user to deselect tuner drivers unnecessary
for their hardware from the build. Use this option with care
.frequency_min = 137000000,
.frequency_max = 858000000,
.frequency_stepsize = 166667,
- .caps = FE_CAN_FEC_AUTO | FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
+ .caps = FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_32 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_128 |
+ FE_CAN_QAM_256 |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO
},
.release = dst_release,
select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_SI21XX if !DVB_FE_CUSTOMISE
select DVB_DS3000 if !DVB_FE_CUSTOMISE
- select VIDEO_IR
+ depends on VIDEO_IR
help
Support for cards based on the SDMC DM1105 PCI chip like
DvbWorld 2002
config DVB_USB
tristate "Support for various USB DVB devices"
- depends on DVB_CORE && USB && I2C && INPUT
+ depends on DVB_CORE && USB && I2C && IR_CORE
help
By enabling this you will be able to choose the various supported
USB1.1 and USB2.0 DVB devices.
config DVB_FE_CUSTOMISE
bool "Customise the frontend modules to build"
depends on DVB_CORE
- default N
+ default y if EMBEDDED
help
This allows the user to select/deselect frontend drivers for their
hardware from the build.
config SMS_SIANO_MDTV
tristate "Siano SMS1xxx based MDTV receiver"
- depends on DVB_CORE && INPUT && HAS_DMA
+ depends on DVB_CORE && IR_CORE && HAS_DMA
---help---
Choose Y or M here if you have MDTV receiver with a Siano chipset.
*/
prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE);
-
- if (list_empty(&coredev->buffers))
+ if (list_empty(&coredev->buffers)) {
+ spin_unlock_irqrestore(&coredev->bufferslock, flags);
schedule();
+ spin_lock_irqsave(&coredev->bufferslock, flags);
+ }
finish_wait(&coredev->buffer_mng_waitq, &wait);
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_TDA10023 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
- select VIDEO_IR
+ depends on VIDEO_IR
help
Support for simple SAA7146 based DVB cards
(so called Budget- or Nova-PCI cards) without onboard
config VIDEO_HELPER_CHIPS_AUTO
bool "Autoselect pertinent encoders/decoders and other helper chips"
- default y
+ default y if !EMBEDDED
---help---
Most video cards may require additional modules to encode or
decode audio/video standards. This option will autoselect
and colour models.
config SOC_CAMERA_MT9M111
- tristate "mt9m111 and mt9m112 support"
+ tristate "mt9m111, mt9m112 and mt9m131 support"
depends on SOC_CAMERA && I2C
help
- This driver supports MT9M111 and MT9M112 cameras from Micron
+ This driver supports MT9M111, MT9M112 and MT9M131 cameras from
+ Micron/Aptina
config SOC_CAMERA_MT9T031
tristate "mt9t031 support"
This is a virtual test device for the memory-to-memory driver
framework.
+config VIDEO_SAMSUNG_S5P_FIMC
+ tristate "Samsung S5P FIMC (video postprocessor) driver"
+ depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
+ select VIDEOBUF_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ help
+ This is a v4l2 driver for the S5P camera interface
+ (video postprocessor)
+
endif # V4L_MEM2MEM_DRIVERS
omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o
videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \
- v4l2-event.o
+ v4l2-event.o v4l2-ctrls.o
# V4L2 core modules
obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o
obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2) += sh_mobile_csi2.o
obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/
obj-$(CONFIG_ARCH_DAVINCI) += davinci/
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEOBUF_DMA_SG
- select VIDEO_IR
+ depends on VIDEO_IR
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
- i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list);
+ i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list, NULL);
}
}
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
-#include <linux/i2c-id.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-i2c-drv.h>
MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC");
MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On");
+struct cs53l32a_state {
+ struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+};
+
+static inline struct cs53l32a_state *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct cs53l32a_state, sd);
+}
+
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct cs53l32a_state, hdl)->sd;
+}
+
/* ----------------------------------------------------------------------- */
static int cs53l32a_write(struct v4l2_subdev *sd, u8 reg, u8 value)
return 0;
}
-static int cs53l32a_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int cs53l32a_s_ctrl(struct v4l2_ctrl *ctrl)
{
- if (ctrl->id == V4L2_CID_AUDIO_MUTE) {
- ctrl->value = (cs53l32a_read(sd, 0x03) & 0xc0) != 0;
- return 0;
- }
- if (ctrl->id != V4L2_CID_AUDIO_VOLUME)
- return -EINVAL;
- ctrl->value = (s8)cs53l32a_read(sd, 0x04);
- return 0;
-}
+ struct v4l2_subdev *sd = to_sd(ctrl);
-static int cs53l32a_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- if (ctrl->id == V4L2_CID_AUDIO_MUTE) {
- cs53l32a_write(sd, 0x03, ctrl->value ? 0xf0 : 0x30);
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ cs53l32a_write(sd, 0x03, ctrl->val ? 0xf0 : 0x30);
+ return 0;
+ case V4L2_CID_AUDIO_VOLUME:
+ cs53l32a_write(sd, 0x04, (u8)ctrl->val);
+ cs53l32a_write(sd, 0x05, (u8)ctrl->val);
return 0;
}
- if (ctrl->id != V4L2_CID_AUDIO_VOLUME)
- return -EINVAL;
- if (ctrl->value > 12 || ctrl->value < -96)
- return -EINVAL;
- cs53l32a_write(sd, 0x04, (u8) ctrl->value);
- cs53l32a_write(sd, 0x05, (u8) ctrl->value);
- return 0;
+ return -EINVAL;
}
static int cs53l32a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
static int cs53l32a_log_status(struct v4l2_subdev *sd)
{
+ struct cs53l32a_state *state = to_state(sd);
u8 v = cs53l32a_read(sd, 0x01);
- u8 m = cs53l32a_read(sd, 0x03);
- s8 vol = cs53l32a_read(sd, 0x04);
- v4l2_info(sd, "Input: %d%s\n", (v >> 4) & 3,
- (m & 0xC0) ? " (muted)" : "");
- v4l2_info(sd, "Volume: %d dB\n", vol);
+ v4l2_info(sd, "Input: %d\n", (v >> 4) & 3);
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
return 0;
}
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops cs53l32a_ctrl_ops = {
+ .s_ctrl = cs53l32a_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops cs53l32a_core_ops = {
.log_status = cs53l32a_log_status,
.g_chip_ident = cs53l32a_g_chip_ident,
- .g_ctrl = cs53l32a_g_ctrl,
- .s_ctrl = cs53l32a_s_ctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
};
static const struct v4l2_subdev_audio_ops cs53l32a_audio_ops = {
static int cs53l32a_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ struct cs53l32a_state *state;
struct v4l2_subdev *sd;
int i;
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
- sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
- if (sd == NULL)
+ state = kzalloc(sizeof(struct cs53l32a_state), GFP_KERNEL);
+ if (state == NULL)
return -ENOMEM;
+ sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &cs53l32a_ops);
for (i = 1; i <= 7; i++) {
v4l2_dbg(1, debug, sd, "Read Reg %d %02x\n", i, v);
}
+ v4l2_ctrl_handler_init(&state->hdl, 2);
+ v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops,
+ V4L2_CID_AUDIO_VOLUME, -96, 12, 1, 0);
+ v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ sd->ctrl_handler = &state->hdl;
+ if (state->hdl.error) {
+ int err = state->hdl.error;
+
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
+ return err;
+ }
+
/* Set cs53l32a internal register for Adaptec 2010/2410 setup */
- cs53l32a_write(sd, 0x01, (u8) 0x21);
- cs53l32a_write(sd, 0x02, (u8) 0x29);
- cs53l32a_write(sd, 0x03, (u8) 0x30);
- cs53l32a_write(sd, 0x04, (u8) 0x00);
- cs53l32a_write(sd, 0x05, (u8) 0x00);
- cs53l32a_write(sd, 0x06, (u8) 0x00);
- cs53l32a_write(sd, 0x07, (u8) 0x00);
+ cs53l32a_write(sd, 0x01, 0x21);
+ cs53l32a_write(sd, 0x02, 0x29);
+ cs53l32a_write(sd, 0x03, 0x30);
+ cs53l32a_write(sd, 0x04, 0x00);
+ cs53l32a_write(sd, 0x05, 0x00);
+ cs53l32a_write(sd, 0x06, 0x00);
+ cs53l32a_write(sd, 0x07, 0x00);
/* Display results, should be 0x21,0x29,0x30,0x00,0x00,0x00,0x00 */
static int cs53l32a_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct cs53l32a_state *state = to_state(sd);
v4l2_device_unregister_subdev(sd);
- kfree(sd);
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
return 0;
}
depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL
depends on INPUT # due to VIDEO_IR
select I2C_ALGOBIT
- select VIDEO_IR
+ depends on VIDEO_IR
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
break;
}
- return i2c_new_probed_device(adap, &info, addr_list) == NULL ? -1 : 0;
+ return i2c_new_probed_device(adap, &info, addr_list, NULL) == NULL ?
+ -1 : 0;
}
int cx18_i2c_register(struct cx18 *cx, unsigned idx)
depends on VIDEO_DEV && I2C && INPUT
select VIDEO_TUNER
select VIDEO_TVEEPROM
- select VIDEO_IR
+ depends on VIDEO_IR
select VIDEOBUF_VMALLOC
select VIDEO_CX25840
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
+/********************** COMMON CODE *********************/
+
+/* definitions for audio properties bits 29-28 */
+#define CX2341X_AUDIO_ENCODING_METHOD_MPEG 0
+#define CX2341X_AUDIO_ENCODING_METHOD_AC3 1
+#define CX2341X_AUDIO_ENCODING_METHOD_LPCM 2
+
+static const char *cx2341x_get_name(u32 id)
+{
+ switch (id) {
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+ return "Spatial Filter Mode";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
+ return "Spatial Filter";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+ return "Spatial Luma Filter Type";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
+ return "Spatial Chroma Filter Type";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+ return "Temporal Filter Mode";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
+ return "Temporal Filter";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+ return "Median Filter Type";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
+ return "Median Luma Filter Maximum";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
+ return "Median Luma Filter Minimum";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
+ return "Median Chroma Filter Maximum";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
+ return "Median Chroma Filter Minimum";
+ case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
+ return "Insert Navigation Packets";
+ }
+ return NULL;
+}
+
+static const char **cx2341x_get_menu(u32 id)
+{
+ static const char *cx2341x_video_spatial_filter_mode_menu[] = {
+ "Manual",
+ "Auto",
+ NULL
+ };
+
+ static const char *cx2341x_video_luma_spatial_filter_type_menu[] = {
+ "Off",
+ "1D Horizontal",
+ "1D Vertical",
+ "2D H/V Separable",
+ "2D Symmetric non-separable",
+ NULL
+ };
+
+ static const char *cx2341x_video_chroma_spatial_filter_type_menu[] = {
+ "Off",
+ "1D Horizontal",
+ NULL
+ };
+
+ static const char *cx2341x_video_temporal_filter_mode_menu[] = {
+ "Manual",
+ "Auto",
+ NULL
+ };
+
+ static const char *cx2341x_video_median_filter_type_menu[] = {
+ "Off",
+ "Horizontal",
+ "Vertical",
+ "Horizontal/Vertical",
+ "Diagonal",
+ NULL
+ };
+
+ switch (id) {
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+ return cx2341x_video_spatial_filter_mode_menu;
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+ return cx2341x_video_luma_spatial_filter_type_menu;
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
+ return cx2341x_video_chroma_spatial_filter_type_menu;
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+ return cx2341x_video_temporal_filter_mode_menu;
+ case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+ return cx2341x_video_median_filter_type_menu;
+ }
+ return NULL;
+}
+
+static void cx2341x_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
+ s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags)
+{
+ *name = cx2341x_get_name(id);
+ *flags = 0;
+
+ switch (id) {
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+ *type = V4L2_CTRL_TYPE_MENU;
+ *min = 0;
+ *step = 0;
+ break;
+ case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
+ *type = V4L2_CTRL_TYPE_BOOLEAN;
+ *min = 0;
+ *max = *step = 1;
+ break;
+ default:
+ *type = V4L2_CTRL_TYPE_INTEGER;
+ break;
+ }
+ switch (id) {
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+ *flags |= V4L2_CTRL_FLAG_UPDATE;
+ break;
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
+ *flags |= V4L2_CTRL_FLAG_SLIDER;
+ break;
+ case V4L2_CID_MPEG_VIDEO_ENCODING:
+ *flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ break;
+ }
+}
+
+
+/********************** OLD CODE *********************/
+
/* Must be sorted from low to high control ID! */
const u32 cx2341x_mpeg_ctrls[] = {
V4L2_CID_MPEG_CLASS,
.video_chroma_median_filter_top = 255,
.video_chroma_median_filter_bottom = 0,
};
-
-
/* Map the control ID to the correct field in the cx2341x_mpeg_params
struct. Return -EINVAL if the ID is unknown, else return 0. */
static int cx2341x_get_ctrl(const struct cx2341x_mpeg_params *params,
{
const char *name;
- qctrl->flags = 0;
switch (qctrl->id) {
/* MPEG controls */
case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
- name = "Spatial Filter Mode";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
- name = "Spatial Filter";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
- name = "Spatial Luma Filter Type";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
- name = "Spatial Chroma Filter Type";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
- name = "Temporal Filter Mode";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
- name = "Temporal Filter";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
- name = "Median Filter Type";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
- name = "Median Luma Filter Maximum";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
- name = "Median Luma Filter Minimum";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
- name = "Median Chroma Filter Maximum";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
- name = "Median Chroma Filter Minimum";
- break;
case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
- name = "Insert Navigation Packets";
- break;
+ cx2341x_ctrl_fill(qctrl->id, &name, &qctrl->type,
+ &min, &max, &step, &def, &qctrl->flags);
+ qctrl->minimum = min;
+ qctrl->maximum = max;
+ qctrl->step = step;
+ qctrl->default_value = def;
+ qctrl->reserved[0] = qctrl->reserved[1] = 0;
+ strlcpy(qctrl->name, name, sizeof(qctrl->name));
+ return 0;
default:
return v4l2_ctrl_query_fill(qctrl, min, max, step, def);
}
- switch (qctrl->id) {
- case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
- qctrl->type = V4L2_CTRL_TYPE_MENU;
- min = 0;
- step = 1;
- break;
- case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
- qctrl->type = V4L2_CTRL_TYPE_BOOLEAN;
- min = 0;
- max = 1;
- step = 1;
- break;
- default:
- qctrl->type = V4L2_CTRL_TYPE_INTEGER;
- break;
- }
- switch (qctrl->id) {
- case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
- qctrl->flags |= V4L2_CTRL_FLAG_UPDATE;
- break;
- }
- qctrl->minimum = min;
- qctrl->maximum = max;
- qctrl->step = step;
- qctrl->default_value = def;
- qctrl->reserved[0] = qctrl->reserved[1] = 0;
- snprintf(qctrl->name, sizeof(qctrl->name), name);
- return 0;
}
int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
NULL
};
- static const char *cx2341x_video_spatial_filter_mode_menu[] = {
- "Manual",
- "Auto",
- NULL
- };
-
- static const char *cx2341x_video_luma_spatial_filter_type_menu[] = {
- "Off",
- "1D Horizontal",
- "1D Vertical",
- "2D H/V Separable",
- "2D Symmetric non-separable",
- NULL
- };
-
- static const char *cx2341x_video_chroma_spatial_filter_type_menu[] = {
- "Off",
- "1D Horizontal",
- NULL
- };
-
- static const char *cx2341x_video_temporal_filter_mode_menu[] = {
- "Manual",
- "Auto",
- NULL
- };
-
- static const char *cx2341x_video_median_filter_type_menu[] = {
- "Off",
- "Horizontal",
- "Vertical",
- "Horizontal/Vertical",
- "Diagonal",
- NULL
- };
-
switch (id) {
case V4L2_CID_MPEG_STREAM_TYPE:
return (p->capabilities & CX2341X_CAP_HAS_TS) ?
case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
return NULL;
case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
- return cx2341x_video_spatial_filter_mode_menu;
case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
- return cx2341x_video_luma_spatial_filter_type_menu;
case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
- return cx2341x_video_chroma_spatial_filter_type_menu;
case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
- return cx2341x_video_temporal_filter_mode_menu;
case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
- return cx2341x_video_median_filter_type_menu;
+ return cx2341x_get_menu(id);
default:
return v4l2_ctrl_get_menu(id);
}
}
EXPORT_SYMBOL(cx2341x_ctrl_get_menu);
-/* definitions for audio properties bits 29-28 */
-#define CX2341X_AUDIO_ENCODING_METHOD_MPEG 0
-#define CX2341X_AUDIO_ENCODING_METHOD_AC3 1
-#define CX2341X_AUDIO_ENCODING_METHOD_LPCM 2
-
static void cx2341x_calc_audio_properties(struct cx2341x_mpeg_params *params)
{
params->audio_properties =
}
EXPORT_SYMBOL(cx2341x_log_status);
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
+
+/********************** NEW CODE *********************/
+
+static inline struct cx2341x_handler *to_cxhdl(struct v4l2_ctrl *ctrl)
+{
+ return container_of(ctrl->handler, struct cx2341x_handler, hdl);
+}
+
+static int cx2341x_hdl_api(struct cx2341x_handler *hdl,
+ u32 cmd, int args, ...)
+{
+ u32 data[CX2341X_MBOX_MAX_DATA];
+ va_list vargs;
+ int i;
+
+ va_start(vargs, args);
+
+ for (i = 0; i < args; i++)
+ data[i] = va_arg(vargs, int);
+ va_end(vargs);
+ return hdl->func(hdl->priv, cmd, args, 0, data);
+}
+
+/* ctrl->handler->lock is held, so it is safe to access cur.val */
+static inline int cx2341x_neq(struct v4l2_ctrl *ctrl)
+{
+ return ctrl && ctrl->val != ctrl->cur.val;
+}
+
+static int cx2341x_try_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct cx2341x_handler *hdl = to_cxhdl(ctrl);
+ s32 val = ctrl->val;
+
+ switch (ctrl->id) {
+ case V4L2_CID_MPEG_VIDEO_B_FRAMES: {
+ /* video gop cluster */
+ int b = val + 1;
+ int gop = hdl->video_gop_size->val;
+
+ gop = b * ((gop + b - 1) / b);
+
+ /* Max GOP size = 34 */
+ while (gop > 34)
+ gop -= b;
+ hdl->video_gop_size->val = gop;
+ break;
+ }
+
+ case V4L2_CID_MPEG_STREAM_TYPE:
+ /* stream type cluster */
+ hdl->video_encoding->val =
+ (hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_SS ||
+ hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_VCD) ?
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_1 :
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_2;
+ if (hdl->video_encoding->val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
+ /* MPEG-1 implies CBR */
+ hdl->video_bitrate_mode->val =
+ V4L2_MPEG_VIDEO_BITRATE_MODE_CBR;
+ /* peak bitrate shall be >= normal bitrate */
+ if (hdl->video_bitrate_mode->val == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR &&
+ hdl->video_bitrate_peak->val < hdl->video_bitrate->val)
+ hdl->video_bitrate_peak->val = hdl->video_bitrate->val;
+ break;
+ }
+ return 0;
+}
+
+static int cx2341x_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ static const int mpeg_stream_type[] = {
+ 0, /* MPEG-2 PS */
+ 1, /* MPEG-2 TS */
+ 2, /* MPEG-1 SS */
+ 14, /* DVD */
+ 11, /* VCD */
+ 12, /* SVCD */
+ };
+ struct cx2341x_handler *hdl = to_cxhdl(ctrl);
+ s32 val = ctrl->val;
+ u32 props;
+ int err;
+
+ switch (ctrl->id) {
+ case V4L2_CID_MPEG_STREAM_VBI_FMT:
+ if (hdl->ops && hdl->ops->s_stream_vbi_fmt)
+ return hdl->ops->s_stream_vbi_fmt(hdl, val);
+ return 0;
+
+ case V4L2_CID_MPEG_VIDEO_ASPECT:
+ return cx2341x_hdl_api(hdl,
+ CX2341X_ENC_SET_ASPECT_RATIO, 1, val + 1);
+
+ case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_CLOSURE, 1, val);
+
+ case V4L2_CID_MPEG_AUDIO_MUTE:
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_AUDIO, 1, val);
+
+ case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION:
+ return cx2341x_hdl_api(hdl,
+ CX2341X_ENC_SET_FRAME_DROP_RATE, 1, val);
+
+ case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_MISC, 2, 7, val);
+
+ case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
+ /* audio properties cluster */
+ props = (hdl->audio_sampling_freq->val << 0) |
+ (hdl->audio_mode->val << 8) |
+ (hdl->audio_mode_extension->val << 10) |
+ (hdl->audio_crc->val << 14);
+ if (hdl->audio_emphasis->val == V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17)
+ props |= 3 << 12;
+ else
+ props |= hdl->audio_emphasis->val << 12;
+
+ if (hdl->audio_encoding->val == V4L2_MPEG_AUDIO_ENCODING_AC3) {
+ props |=
+#if 1
+ /* Not sure if this MPEG Layer II setting is required */
+ ((3 - V4L2_MPEG_AUDIO_ENCODING_LAYER_2) << 2) |
+#endif
+ (hdl->audio_ac3_bitrate->val << 4) |
+ (CX2341X_AUDIO_ENCODING_METHOD_AC3 << 28);
+ } else {
+ /* Assuming MPEG Layer II */
+ props |=
+ ((3 - hdl->audio_encoding->val) << 2) |
+ ((1 + hdl->audio_l2_bitrate->val) << 4);
+ }
+ err = cx2341x_hdl_api(hdl,
+ CX2341X_ENC_SET_AUDIO_PROPERTIES, 1, props);
+ if (err)
+ return err;
+
+ hdl->audio_properties = props;
+ if (hdl->audio_ac3_bitrate) {
+ int is_ac3 = hdl->audio_encoding->val ==
+ V4L2_MPEG_AUDIO_ENCODING_AC3;
+
+ v4l2_ctrl_activate(hdl->audio_ac3_bitrate, is_ac3);
+ v4l2_ctrl_activate(hdl->audio_l2_bitrate, !is_ac3);
+ }
+ v4l2_ctrl_activate(hdl->audio_mode_extension,
+ hdl->audio_mode->val == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO);
+ if (cx2341x_neq(hdl->audio_sampling_freq) &&
+ hdl->ops && hdl->ops->s_audio_sampling_freq)
+ return hdl->ops->s_audio_sampling_freq(hdl, hdl->audio_sampling_freq->val);
+ if (cx2341x_neq(hdl->audio_mode) &&
+ hdl->ops && hdl->ops->s_audio_mode)
+ return hdl->ops->s_audio_mode(hdl, hdl->audio_mode->val);
+ return 0;
+
+ case V4L2_CID_MPEG_VIDEO_B_FRAMES:
+ /* video gop cluster */
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_PROPERTIES, 2,
+ hdl->video_gop_size->val,
+ hdl->video_b_frames->val + 1);
+
+ case V4L2_CID_MPEG_STREAM_TYPE:
+ /* stream type cluster */
+ err = cx2341x_hdl_api(hdl,
+ CX2341X_ENC_SET_STREAM_TYPE, 1, mpeg_stream_type[val]);
+ if (err)
+ return err;
+
+ err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_BIT_RATE, 5,
+ hdl->video_bitrate_mode->val,
+ hdl->video_bitrate->val,
+ hdl->video_bitrate_peak->val / 400, 0, 0);
+ if (err)
+ return err;
+
+ v4l2_ctrl_activate(hdl->video_bitrate_mode,
+ hdl->video_encoding->val != V4L2_MPEG_VIDEO_ENCODING_MPEG_1);
+ v4l2_ctrl_activate(hdl->video_bitrate_peak,
+ hdl->video_bitrate_mode->val != V4L2_MPEG_VIDEO_BITRATE_MODE_CBR);
+ if (cx2341x_neq(hdl->video_encoding) &&
+ hdl->ops && hdl->ops->s_video_encoding)
+ return hdl->ops->s_video_encoding(hdl, hdl->video_encoding->val);
+ return 0;
+
+ case V4L2_CID_MPEG_VIDEO_MUTE:
+ /* video mute cluster */
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_VIDEO, 1,
+ hdl->video_mute->val |
+ (hdl->video_mute_yuv->val << 8));
+
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: {
+ int active_filter;
+
+ /* video filter mode */
+ err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_MODE, 2,
+ hdl->video_spatial_filter_mode->val |
+ (hdl->video_temporal_filter_mode->val << 1),
+ hdl->video_median_filter_type->val);
+ if (err)
+ return err;
+
+ active_filter = hdl->video_spatial_filter_mode->val !=
+ V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO;
+ v4l2_ctrl_activate(hdl->video_spatial_filter, active_filter);
+ v4l2_ctrl_activate(hdl->video_luma_spatial_filter_type, active_filter);
+ v4l2_ctrl_activate(hdl->video_chroma_spatial_filter_type, active_filter);
+ active_filter = hdl->video_temporal_filter_mode->val !=
+ V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO;
+ v4l2_ctrl_activate(hdl->video_temporal_filter, active_filter);
+ active_filter = hdl->video_median_filter_type->val !=
+ V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF;
+ v4l2_ctrl_activate(hdl->video_luma_median_filter_bottom, active_filter);
+ v4l2_ctrl_activate(hdl->video_luma_median_filter_top, active_filter);
+ v4l2_ctrl_activate(hdl->video_chroma_median_filter_bottom, active_filter);
+ v4l2_ctrl_activate(hdl->video_chroma_median_filter_top, active_filter);
+ return 0;
+ }
+
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+ /* video filter type cluster */
+ return cx2341x_hdl_api(hdl,
+ CX2341X_ENC_SET_SPATIAL_FILTER_TYPE, 2,
+ hdl->video_luma_spatial_filter_type->val,
+ hdl->video_chroma_spatial_filter_type->val);
+
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
+ /* video filter cluster */
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_PROPS, 2,
+ hdl->video_spatial_filter->val,
+ hdl->video_temporal_filter->val);
+
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
+ /* video median cluster */
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_CORING_LEVELS, 4,
+ hdl->video_luma_median_filter_bottom->val,
+ hdl->video_luma_median_filter_top->val,
+ hdl->video_chroma_median_filter_bottom->val,
+ hdl->video_chroma_median_filter_top->val);
+ }
+ return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops cx2341x_ops = {
+ .try_ctrl = cx2341x_try_ctrl,
+ .s_ctrl = cx2341x_s_ctrl,
+};
+
+static struct v4l2_ctrl *cx2341x_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
+ u32 id, s32 min, s32 max, s32 step, s32 def)
+{
+ struct v4l2_ctrl_config cfg;
+
+ cx2341x_ctrl_fill(id, &cfg.name, &cfg.type, &min, &max, &step, &def, &cfg.flags);
+ cfg.ops = &cx2341x_ops;
+ cfg.id = id;
+ cfg.min = min;
+ cfg.max = max;
+ cfg.def = def;
+ if (cfg.type == V4L2_CTRL_TYPE_MENU) {
+ cfg.step = 0;
+ cfg.menu_skip_mask = step;
+ cfg.qmenu = cx2341x_get_menu(id);
+ } else {
+ cfg.step = step;
+ cfg.menu_skip_mask = 0;
+ }
+ return v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+}
+
+static struct v4l2_ctrl *cx2341x_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+ u32 id, s32 min, s32 max, s32 step, s32 def)
+{
+ return v4l2_ctrl_new_std(hdl, &cx2341x_ops, id, min, max, step, def);
+}
+
+static struct v4l2_ctrl *cx2341x_ctrl_new_menu(struct v4l2_ctrl_handler *hdl,
+ u32 id, s32 max, s32 mask, s32 def)
+{
+ return v4l2_ctrl_new_std_menu(hdl, &cx2341x_ops, id, max, mask, def);
+}
+
+int cx2341x_handler_init(struct cx2341x_handler *cxhdl,
+ unsigned nr_of_controls_hint)
+{
+ struct v4l2_ctrl_handler *hdl = &cxhdl->hdl;
+ u32 caps = cxhdl->capabilities;
+ int has_sliced_vbi = caps & CX2341X_CAP_HAS_SLICED_VBI;
+ int has_ac3 = caps & CX2341X_CAP_HAS_AC3;
+ int has_ts = caps & CX2341X_CAP_HAS_TS;
+
+ cxhdl->width = 720;
+ cxhdl->height = 480;
+
+ v4l2_ctrl_handler_init(hdl, nr_of_controls_hint);
+
+ /* Add controls in ascending control ID order for fastest
+ insertion time. */
+ cxhdl->stream_type = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_STREAM_TYPE,
+ V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD, has_ts ? 0 : 2,
+ V4L2_MPEG_STREAM_TYPE_MPEG2_PS);
+ cxhdl->stream_vbi_fmt = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_STREAM_VBI_FMT,
+ V4L2_MPEG_STREAM_VBI_FMT_IVTV, has_sliced_vbi ? 0 : 2,
+ V4L2_MPEG_STREAM_VBI_FMT_NONE);
+ cxhdl->audio_sampling_freq = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ,
+ V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000, 0,
+ V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000);
+ cxhdl->audio_encoding = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_ENCODING,
+ V4L2_MPEG_AUDIO_ENCODING_AC3, has_ac3 ? ~0x12 : ~0x2,
+ V4L2_MPEG_AUDIO_ENCODING_LAYER_2);
+ cxhdl->audio_l2_bitrate = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_L2_BITRATE,
+ V4L2_MPEG_AUDIO_L2_BITRATE_384K, 0x1ff,
+ V4L2_MPEG_AUDIO_L2_BITRATE_224K);
+ cxhdl->audio_mode = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_MODE,
+ V4L2_MPEG_AUDIO_MODE_MONO, 0,
+ V4L2_MPEG_AUDIO_MODE_STEREO);
+ cxhdl->audio_mode_extension = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_MODE_EXTENSION,
+ V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16, 0,
+ V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4);
+ cxhdl->audio_emphasis = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_EMPHASIS,
+ V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17, 0,
+ V4L2_MPEG_AUDIO_EMPHASIS_NONE);
+ cxhdl->audio_crc = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_CRC,
+ V4L2_MPEG_AUDIO_CRC_CRC16, 0,
+ V4L2_MPEG_AUDIO_CRC_NONE);
+
+ cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_AUDIO_MUTE, 0, 1, 1, 0);
+ if (has_ac3)
+ cxhdl->audio_ac3_bitrate = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_AC3_BITRATE,
+ V4L2_MPEG_AUDIO_AC3_BITRATE_448K, 0x03,
+ V4L2_MPEG_AUDIO_AC3_BITRATE_224K);
+ cxhdl->video_encoding = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_VIDEO_ENCODING,
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 0,
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_2);
+ cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_VIDEO_ASPECT,
+ V4L2_MPEG_VIDEO_ASPECT_221x100, 0,
+ V4L2_MPEG_VIDEO_ASPECT_4x3);
+ cxhdl->video_b_frames = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_B_FRAMES, 0, 33, 1, 2);
+ cxhdl->video_gop_size = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_GOP_SIZE,
+ 1, 34, 1, cxhdl->is_50hz ? 12 : 15);
+ cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, 0, 1, 1, 1);
+ cxhdl->video_bitrate_mode = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_VIDEO_BITRATE_MODE,
+ V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 0,
+ V4L2_MPEG_VIDEO_BITRATE_MODE_VBR);
+ cxhdl->video_bitrate = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_BITRATE,
+ 0, 27000000, 1, 6000000);
+ cxhdl->video_bitrate_peak = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_BITRATE_PEAK,
+ 0, 27000000, 1, 8000000);
+ cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION, 0, 255, 1, 0);
+ cxhdl->video_mute = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_MUTE, 0, 1, 1, 0);
+ cxhdl->video_mute_yuv = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_MUTE_YUV, 0, 0xffffff, 1, 0x008080);
+
+ /* CX23415/6 specific */
+ cxhdl->video_spatial_filter_mode = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE,
+ V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL,
+ V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO, 0,
+ V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL);
+ cxhdl->video_spatial_filter = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
+ 0, 15, 1, 0);
+ cxhdl->video_luma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE,
+ V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF,
+ V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE,
+ 0,
+ V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR);
+ cxhdl->video_chroma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE,
+ V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF,
+ V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR,
+ 0,
+ V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR);
+ cxhdl->video_temporal_filter_mode = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE,
+ V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL,
+ V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO,
+ 0,
+ V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL);
+ cxhdl->video_temporal_filter = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER,
+ 0, 31, 1, 8);
+ cxhdl->video_median_filter_type = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE,
+ V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF,
+ V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG,
+ 0,
+ V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF);
+ cxhdl->video_luma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM,
+ 0, 255, 1, 0);
+ cxhdl->video_luma_median_filter_top = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP,
+ 0, 255, 1, 255);
+ cxhdl->video_chroma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM,
+ 0, 255, 1, 0);
+ cxhdl->video_chroma_median_filter_top = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP,
+ 0, 255, 1, 255);
+ cx2341x_ctrl_new_custom(hdl, V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS,
+ 0, 1, 1, 0);
+
+ if (hdl->error) {
+ int err = hdl->error;
+
+ v4l2_ctrl_handler_free(hdl);
+ return err;
+ }
+
+ v4l2_ctrl_cluster(8, &cxhdl->audio_sampling_freq);
+ v4l2_ctrl_cluster(2, &cxhdl->video_b_frames);
+ v4l2_ctrl_cluster(5, &cxhdl->stream_type);
+ v4l2_ctrl_cluster(2, &cxhdl->video_mute);
+ v4l2_ctrl_cluster(3, &cxhdl->video_spatial_filter_mode);
+ v4l2_ctrl_cluster(2, &cxhdl->video_luma_spatial_filter_type);
+ v4l2_ctrl_cluster(2, &cxhdl->video_spatial_filter);
+ v4l2_ctrl_cluster(4, &cxhdl->video_luma_median_filter_top);
+
+ return 0;
+}
+EXPORT_SYMBOL(cx2341x_handler_init);
+
+void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz)
+{
+ cxhdl->is_50hz = is_50hz;
+ cxhdl->video_gop_size->default_value = cxhdl->is_50hz ? 12 : 15;
+}
+EXPORT_SYMBOL(cx2341x_handler_set_50hz);
+
+int cx2341x_handler_setup(struct cx2341x_handler *cxhdl)
+{
+ int h = cxhdl->height;
+ int w = cxhdl->width;
+ int err;
+
+ err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_OUTPUT_PORT, 2, cxhdl->port, 0);
+ if (err)
+ return err;
+ err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_RATE, 1, cxhdl->is_50hz);
+ if (err)
+ return err;
+
+ if (v4l2_ctrl_g_ctrl(cxhdl->video_encoding) == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) {
+ w /= 2;
+ h /= 2;
+ }
+ err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_SIZE, 2, h, w);
+ if (err)
+ return err;
+ return v4l2_ctrl_handler_setup(&cxhdl->hdl);
+}
+EXPORT_SYMBOL(cx2341x_handler_setup);
+
+void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy)
+{
+ v4l2_ctrl_grab(cxhdl->audio_sampling_freq, busy);
+ v4l2_ctrl_grab(cxhdl->audio_encoding, busy);
+ v4l2_ctrl_grab(cxhdl->audio_l2_bitrate, busy);
+ v4l2_ctrl_grab(cxhdl->audio_ac3_bitrate, busy);
+ v4l2_ctrl_grab(cxhdl->stream_vbi_fmt, busy);
+ v4l2_ctrl_grab(cxhdl->stream_type, busy);
+ v4l2_ctrl_grab(cxhdl->video_bitrate_mode, busy);
+ v4l2_ctrl_grab(cxhdl->video_bitrate, busy);
+ v4l2_ctrl_grab(cxhdl->video_bitrate_peak, busy);
+}
+EXPORT_SYMBOL(cx2341x_handler_set_busy);
select VIDEO_BTCX
select VIDEO_TUNER
select VIDEO_TVEEPROM
- select VIDEO_IR
+ depends on IR_CORE
select VIDEOBUF_DVB
select VIDEOBUF_DMA_SG
select VIDEO_CX25840
cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o \
cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \
- cx23885-ioctl.o cx23885-ir.o cx23885-input.o cx23888-ir.o \
- netup-init.o cimax2.o netup-eeprom.o cx23885-f300.o
+ cx23885-ioctl.o cx23885-ir.o cx23885-av.o cx23885-input.o \
+ cx23888-ir.o netup-init.o cimax2.o netup-eeprom.o \
+ cx23885-f300.o
obj-$(CONFIG_VIDEO_CX23885) += cx23885.o
--- /dev/null
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * AV device support routines - non-input, non-vl42_subdev routines
+ *
+ * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "cx23885.h"
+
+void cx23885_av_work_handler(struct work_struct *work)
+{
+ struct cx23885_dev *dev =
+ container_of(work, struct cx23885_dev, cx25840_work);
+ bool handled;
+
+ v4l2_subdev_call(dev->sd_cx25840, core, interrupt_service_routine,
+ PCI_MSK_AV_CORE, &handled);
+ cx23885_irq_enable(dev, PCI_MSK_AV_CORE);
+}
--- /dev/null
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * AV device support routines - non-input, non-vl42_subdev routines
+ *
+ * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _CX23885_AV_H_
+#define _CX23885_AV_H_
+void cx23885_av_work_handler(struct work_struct *work);
+#endif
#include "netup-init.h"
#include "cx23888-ir.h"
+static unsigned int enable_885_ir;
+module_param(enable_885_ir, int, 0644);
+MODULE_PARM_DESC(enable_885_ir,
+ "Enable integrated IR controller for supported\n"
+ "\t\t CX2388[57] boards that are wired for it:\n"
+ "\t\t\tHVR-1250 (reported safe)\n"
+ "\t\t\tTeVii S470 (reported unsafe)\n"
+ "\t\t This can cause an interrupt storm with some cards.\n"
+ "\t\t Default: 0 [Disabled]");
+
/* ------------------------------------------------------------------ */
/* board config info */
case 79101:
/* WinTV-HVR1250 (PCIe, Retail, IR, half height,
ATSC and Basic analog */
+ case 79501:
+ /* WinTV-HVR1250 (PCIe, No IR, half height,
+ ATSC [at least] and Basic analog) */
case 79561:
/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
ATSC and Basic analog */
int cx23885_ir_init(struct cx23885_dev *dev)
{
+ static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
+ {
+ .flags = V4L2_SUBDEV_IO_PIN_INPUT,
+ .pin = CX23885_PIN_IR_RX_GPIO19,
+ .function = CX23885_PAD_IR_RX,
+ .value = 0,
+ .strength = CX25840_PIN_DRIVE_MEDIUM,
+ }, {
+ .flags = V4L2_SUBDEV_IO_PIN_OUTPUT,
+ .pin = CX23885_PIN_IR_TX_GPIO20,
+ .function = CX23885_PAD_IR_TX,
+ .value = 0,
+ .strength = CX25840_PIN_DRIVE_MEDIUM,
+ }
+ };
+ const size_t ir_rxtx_pin_cfg_count = ARRAY_SIZE(ir_rxtx_pin_cfg);
+
+ static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = {
+ {
+ .flags = V4L2_SUBDEV_IO_PIN_INPUT,
+ .pin = CX23885_PIN_IR_RX_GPIO19,
+ .function = CX23885_PAD_IR_RX,
+ .value = 0,
+ .strength = CX25840_PIN_DRIVE_MEDIUM,
+ }
+ };
+ const size_t ir_rx_pin_cfg_count = ARRAY_SIZE(ir_rx_pin_cfg);
+
+ struct v4l2_subdev_ir_parameters params;
int ret = 0;
switch (dev->board) {
- case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
if (ret)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
- dev->pci_irqmask |= PCI_MSK_IR;
+ v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+ ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
+ /*
+ * For these boards we need to invert the Tx output via the
+ * IR controller to have the LED off while idle
+ */
+ v4l2_subdev_call(dev->sd_ir, ir, tx_g_parameters, ¶ms);
+ params.enable = false;
+ params.shutdown = false;
+ params.invert_level = true;
+ v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms);
+ params.shutdown = true;
+ v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms);
+ break;
+ case CX23885_BOARD_TEVII_S470:
+ if (!enable_885_ir)
+ break;
+ dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+ if (dev->sd_ir == NULL) {
+ ret = -ENODEV;
+ break;
+ }
+ v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+ ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ if (!enable_885_ir)
+ break;
+ dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+ if (dev->sd_ir == NULL) {
+ ret = -ENODEV;
+ break;
+ }
+ v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+ ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
request_module("ir-kbd-i2c");
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
- dev->pci_irqmask &= ~PCI_MSK_IR;
- cx_clear(PCI_INT_MSK, PCI_MSK_IR);
+ cx23885_irq_remove(dev, PCI_MSK_IR);
cx23888_ir_remove(dev);
dev->sd_ir = NULL;
break;
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
+ /* sd_ir is a duplicate pointer to the AV Core, just clear it */
+ dev->sd_ir = NULL;
+ break;
}
}
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
- if (dev->sd_ir && (dev->pci_irqmask & PCI_MSK_IR))
- cx_set(PCI_INT_MSK, PCI_MSK_IR);
+ if (dev->sd_ir)
+ cx23885_irq_add_enable(dev, PCI_MSK_IR);
+ break;
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ if (dev->sd_ir)
+ cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
break;
}
}
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ if (dev->i2c_bus[0].i2c_rc == 0) {
+ if (eeprom[0x80] != 0x84)
+ hauppauge_eeprom(dev, eeprom+0xc0);
+ else
+ hauppauge_eeprom(dev, eeprom+0x80);
+ }
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1400:
* loaded, ensure this happens.
*/
switch (dev->board) {
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ /* Currently only enabled for the integrated IR controller */
+ if (!enable_885_ir)
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", "cx25840", 0x88 >> 1, NULL);
- v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
+ if (dev->sd_cx25840) {
+ dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
+ v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
+ }
break;
}
#include "cimax2.h"
#include "cx23888-ir.h"
#include "cx23885-ir.h"
+#include "cx23885-av.h"
#include "cx23885-input.h"
MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
},
};
+void cx23885_irq_add(struct cx23885_dev *dev, u32 mask)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ dev->pci_irqmask |= mask;
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ dev->pci_irqmask |= mask;
+ cx_set(PCI_INT_MSK, mask);
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask)
+{
+ u32 v;
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ v = mask & dev->pci_irqmask;
+ if (v)
+ cx_set(PCI_INT_MSK, v);
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static inline void cx23885_irq_enable_all(struct cx23885_dev *dev)
+{
+ cx23885_irq_enable(dev, 0xffffffff);
+}
+
+void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ cx_clear(PCI_INT_MSK, mask);
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static inline void cx23885_irq_disable_all(struct cx23885_dev *dev)
+{
+ cx23885_irq_disable(dev, 0xffffffff);
+}
+
+void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ dev->pci_irqmask &= ~mask;
+ cx_clear(PCI_INT_MSK, mask);
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static u32 cx23885_irq_get_mask(struct cx23885_dev *dev)
+{
+ u32 v;
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ v = cx_read(PCI_INT_MSK);
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+ return v;
+}
+
static int cx23885_risc_decode(u32 risc)
{
static char *instr[16] = {
cx_write(UART_CTL, 0);
/* Disable Interrupts */
- cx_write(PCI_INT_MSK, 0);
+ cx23885_irq_disable_all(dev);
cx_write(VID_A_INT_MSK, 0);
cx_write(VID_B_INT_MSK, 0);
cx_write(VID_C_INT_MSK, 0);
{
int i;
+ spin_lock_init(&dev->pci_irqmask_lock);
+
mutex_init(&dev->lock);
mutex_init(&dev->gpio_lock);
dev->pci_bus = dev->pci->bus->number;
dev->pci_slot = PCI_SLOT(dev->pci->devfn);
- dev->pci_irqmask = 0x001f00;
+ cx23885_irq_add(dev, 0x001f00);
if (cx23885_boards[dev->board].cimax > 0)
- dev->pci_irqmask |= 0x01800000; /* for CiMaxes */
+ cx23885_irq_add(dev, 0x01800000); /* for CiMaxes */
/* External Master 1 Bus */
dev->i2c_bus[0].nr = 0;
dprintk(1, "%s() DEV_CNTRL2 0x%08X\n", __func__,
cx_read(DEV_CNTRL2));
dprintk(1, "%s() PCI_INT_MSK 0x%08X\n", __func__,
- cx_read(PCI_INT_MSK));
+ cx23885_irq_get_mask(dev));
dprintk(1, "%s() AUD_INT_INT_MSK 0x%08X\n", __func__,
cx_read(AUDIO_INT_INT_MSK));
dprintk(1, "%s() AUD_INT_DMA_CTL 0x%08X\n", __func__,
dprintk(1, "%s() enabling TS int's and DMA\n", __func__);
cx_set(port->reg_ts_int_msk, port->ts_int_msk_val);
cx_set(port->reg_dma_ctl, port->dma_ctl_val);
- cx_set(PCI_INT_MSK, dev->pci_irqmask | port->pci_irqmask);
+ cx23885_irq_add(dev, port->pci_irqmask);
+ cx23885_irq_enable_all(dev);
break;
default:
BUG();
u32 ts1_status, ts1_mask;
u32 ts2_status, ts2_mask;
int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0;
- bool ir_handled = false;
+ bool subdev_handled;
pci_status = cx_read(PCI_INT_STAT);
- pci_mask = cx_read(PCI_INT_MSK);
+ pci_mask = cx23885_irq_get_mask(dev);
vida_status = cx_read(VID_A_INT_STAT);
vida_mask = cx_read(VID_A_INT_MSK);
ts1_status = cx_read(VID_B_INT_STAT);
PCI_MSK_VID_C | PCI_MSK_VID_B | PCI_MSK_VID_A |
PCI_MSK_AUD_INT | PCI_MSK_AUD_EXT |
PCI_MSK_GPIO0 | PCI_MSK_GPIO1 |
- PCI_MSK_IR)) {
+ PCI_MSK_AV_CORE | PCI_MSK_IR)) {
if (pci_status & PCI_MSK_RISC_RD)
dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n",
dprintk(7, " (PCI_MSK_GPIO1 0x%08x)\n",
PCI_MSK_GPIO1);
+ if (pci_status & PCI_MSK_AV_CORE)
+ dprintk(7, " (PCI_MSK_AV_CORE 0x%08x)\n",
+ PCI_MSK_AV_CORE);
+
if (pci_status & PCI_MSK_IR)
dprintk(7, " (PCI_MSK_IR 0x%08x)\n",
PCI_MSK_IR);
handled += cx23885_video_irq(dev, vida_status);
if (pci_status & PCI_MSK_IR) {
- v4l2_subdev_call(dev->sd_ir, ir, interrupt_service_routine,
- pci_status, &ir_handled);
- if (ir_handled)
+ subdev_handled = false;
+ v4l2_subdev_call(dev->sd_ir, core, interrupt_service_routine,
+ pci_status, &subdev_handled);
+ if (subdev_handled)
handled++;
}
+ if ((pci_status & pci_mask) & PCI_MSK_AV_CORE) {
+ cx23885_irq_disable(dev, PCI_MSK_AV_CORE);
+ if (!schedule_work(&dev->cx25840_work))
+ printk(KERN_ERR "%s: failed to set up deferred work for"
+ " AV Core/IR interrupt. Interrupt is disabled"
+ " and won't be re-enabled\n", dev->name);
+ handled++;
+ }
+
if (handled)
cx_write(PCI_INT_STAT, pci_status);
out:
dev = to_cx23885(sd->v4l2_dev);
switch (notification) {
- case V4L2_SUBDEV_IR_RX_NOTIFY: /* Called in an IRQ context */
+ case V4L2_SUBDEV_IR_RX_NOTIFY: /* Possibly called in an IRQ context */
if (sd == dev->sd_ir)
cx23885_ir_rx_v4l2_dev_notify(sd, *(u32 *)arg);
break;
- case V4L2_SUBDEV_IR_TX_NOTIFY: /* Called in an IRQ context */
+ case V4L2_SUBDEV_IR_TX_NOTIFY: /* Possibly called in an IRQ context */
if (sd == dev->sd_ir)
cx23885_ir_tx_v4l2_dev_notify(sd, *(u32 *)arg);
break;
static void cx23885_v4l2_dev_notify_init(struct cx23885_dev *dev)
{
+ INIT_WORK(&dev->cx25840_work, cx23885_av_work_handler);
INIT_WORK(&dev->ir_rx_work, cx23885_ir_rx_work_handler);
INIT_WORK(&dev->ir_tx_work, cx23885_ir_tx_work_handler);
dev->v4l2_dev.notify = cx23885_v4l2_dev_notify;
switch (dev->board) {
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
- cx_set(PCI_INT_MSK, 0x01800000); /* for NetUP */
+ cx23885_irq_add_enable(dev, 0x01800000); /* for NetUP */
break;
}
if (!i2c_wait_done(i2c_adap))
return -EIO;
if (!i2c_slave_did_ack(i2c_adap))
- return -EIO;
+ return -ENXIO;
dprintk(1, "%s() returns 0\n", __func__);
return 0;
cx_write(bus->reg_wdata, wdata);
cx_write(bus->reg_ctrl, ctrl);
- retval = i2c_wait_done(i2c_adap);
- if (retval < 0)
- goto err;
- if (retval == 0)
+ if (!i2c_wait_done(i2c_adap))
goto eio;
+ if (!i2c_slave_did_ack(i2c_adap)) {
+ retval = -ENXIO;
+ goto err;
+ }
if (i2c_debug) {
printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
if (!(ctrl & I2C_NOSTOP))
cx_write(bus->reg_wdata, wdata);
cx_write(bus->reg_ctrl, ctrl);
- retval = i2c_wait_done(i2c_adap);
- if (retval < 0)
- goto err;
- if (retval == 0)
+ if (!i2c_wait_done(i2c_adap))
goto eio;
if (i2c_debug) {
dprintk(1, " %02x", msg->buf[cnt]);
if (!i2c_wait_done(i2c_adap))
return -EIO;
if (!i2c_slave_did_ack(i2c_adap))
- return -EIO;
+ return -ENXIO;
dprintk(1, "%s() returns 0\n", __func__);
cx_write(bus->reg_addr, msg->addr << 25);
cx_write(bus->reg_ctrl, ctrl);
- retval = i2c_wait_done(i2c_adap);
- if (retval < 0)
- goto err;
- if (retval == 0)
+ if (!i2c_wait_done(i2c_adap))
goto eio;
+ if (cnt == 0 && !i2c_slave_did_ack(i2c_adap)) {
+ retval = -ENXIO;
+ goto err;
+ }
msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff;
if (i2c_debug) {
dprintk(1, " %02x", msg->buf[cnt]);
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
- /*
- * We can't call i2c_new_probed_device() because it uses
- * quick writes for probing and the IR receiver device only
- * replies to reads.
- */
- if (i2c_smbus_xfer(&bus->i2c_adap, addr_list[0], 0,
- I2C_SMBUS_READ, 0, I2C_SMBUS_QUICK,
- NULL) >= 0) {
- info.addr = addr_list[0];
- i2c_new_device(&bus->i2c_adap, &info);
- }
+ /* Use quick read command for probe, some IR chips don't
+ * support writes */
+ i2c_new_probed_device(&bus->i2c_adap, &info, addr_list,
+ i2c_probe_func_quick_read);
}
return bus->i2c_rc;
#define MODULE_NAME "cx23885"
-static void convert_measurement(u32 x, struct ir_raw_event *y)
-{
- if (x == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) {
- y->pulse = false;
- y->duration = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
- return;
- }
-
- y->pulse = (x & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? true : false;
- y->duration = x & V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
-}
-
static void cx23885_input_process_measurements(struct cx23885_dev *dev,
bool overrun)
{
struct cx23885_kernel_ir *kernel_ir = dev->kernel_ir;
- struct ir_raw_event kernel_ir_event;
- u32 sd_ir_data[64];
ssize_t num;
int count, i;
bool handle = false;
+ struct ir_raw_event ir_core_event[64];
do {
num = 0;
- v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) sd_ir_data,
- sizeof(sd_ir_data), &num);
+ v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ir_core_event,
+ sizeof(ir_core_event), &num);
- count = num / sizeof(u32);
+ count = num / sizeof(struct ir_raw_event);
for (i = 0; i < count; i++) {
- convert_measurement(sd_ir_data[i], &kernel_ir_event);
ir_raw_event_store(kernel_ir->inp_dev,
- &kernel_ir_event);
+ &ir_core_event[i]);
handle = true;
}
} while (num != 0);
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
/*
- * The only board we handle right now. However other boards
+ * The only boards we handle right now. However other boards
* using the CX2388x integrated IR controller should be similar
*/
break;
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
/*
* The IR controller on this board only returns pulse widths.
* Any other mode setting will fail to set up the device.
* mark is received as low logic level;
* falling edges are detected as rising edges; etc.
*/
- params.invert = true;
+ params.invert_level = true;
+ break;
+ case CX23885_BOARD_TEVII_S470:
+ /*
+ * The IR controller on this board only returns pulse widths.
+ * Any other mode setting will fail to set up the device.
+ */
+ params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+ params.enable = true;
+ params.interrupt_enable = true;
+ params.shutdown = false;
+
+ /* Setup for a standard NEC protocol */
+ params.carrier_freq = 37917; /* Hz, 455 kHz/12 for NEC */
+ params.carrier_range_lower = 33000; /* Hz */
+ params.carrier_range_upper = 43000; /* Hz */
+ params.duty_cycle = 33; /* percent, 33 percent for NEC */
+
+ /*
+ * NEC max pulse width: (64/3)/(455 kHz/12) * 16 nec_units
+ * (64/3)/(455 kHz/12) * 16 nec_units * 1.375 = 12378022 ns
+ */
+ params.max_pulse_width = 12378022; /* ns */
+
+ /*
+ * NEC noise filter min width: (64/3)/(455 kHz/12) * 1 nec_unit
+ * (64/3)/(455 kHz/12) * 1 nec_units * 0.625 = 351648 ns
+ */
+ params.noise_filter_min_width = 351648; /* ns */
+
+ params.modulation = false;
+ params.invert_level = true;
break;
}
v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
- /* Integrated CX23888 IR controller */
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ /* Integrated CX2388[58] IR controller */
driver_type = RC_DRIVER_IR_RAW;
allowed_protos = IR_TYPE_ALL;
/* The grey Hauppauge RC-5 remote */
rc_map = RC_MAP_RC5_HAUPPAUGE_NEW;
break;
+ case CX23885_BOARD_TEVII_S470:
+ /* Integrated CX23885 IR controller */
+ driver_type = RC_DRIVER_IR_RAW;
+ allowed_protos = IR_TYPE_ALL;
+ /* A guess at the remote */
+ rc_map = RC_MAP_TEVII_NEC;
+ break;
default:
return -ENODEV;
}
}
-/* Called in an IRQ context */
+/* Possibly called in an IRQ context */
void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
{
struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
set_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications);
if (events & V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN)
set_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications);
- schedule_work(&dev->ir_rx_work);
+
+ /*
+ * For the integrated AV core, we are already in a workqueue context.
+ * For the CX23888 integrated IR, we are in an interrupt context.
+ */
+ if (sd == dev->sd_cx25840)
+ cx23885_ir_rx_work_handler(&dev->ir_rx_work);
+ else
+ schedule_work(&dev->ir_rx_work);
}
-/* Called in an IRQ context */
+/* Possibly called in an IRQ context */
void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
{
struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
if (events & V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ)
set_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications);
- schedule_work(&dev->ir_tx_work);
+
+ /*
+ * For the integrated AV core, we are already in a workqueue context.
+ * For the CX23888 integrated IR, we are in an interrupt context.
+ */
+ if (sd == dev->sd_cx25840)
+ cx23885_ir_tx_work_handler(&dev->ir_tx_work);
+ else
+ schedule_work(&dev->ir_tx_work);
}
#define DEV_CNTRL2 0x00040000
#define PCI_MSK_IR (1 << 28)
+#define PCI_MSK_AV_CORE (1 << 27)
#define PCI_MSK_GPIO1 (1 << 24)
#define PCI_MSK_GPIO0 (1 << 23)
#define PCI_MSK_APB_DMA (1 << 12)
q->count = 1;
/* enable irqs */
- cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | 0x01);
+ cx23885_irq_add_enable(dev, 0x01);
cx_set(VID_A_INT_MSK, 0x000022);
/* start dma */
q->count = 1;
/* enable irq */
- cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | 0x01);
+ cx23885_irq_add_enable(dev, 0x01);
cx_set(VID_A_INT_MSK, 0x000011);
/* start dma */
return 0;
}
+static int vidioc_log_status(struct file *file, void *priv)
+{
+ struct cx23885_fh *fh = priv;
+ struct cx23885_dev *dev = fh->dev;
+
+ printk(KERN_INFO
+ "%s/0: ============ START LOG STATUS ============\n",
+ dev->name);
+ call_all(dev, core, log_status);
+ printk(KERN_INFO
+ "%s/0: ============= END LOG STATUS =============\n",
+ dev->name);
+ return 0;
+}
+
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qctrl)
{
.vidioc_enum_input = vidioc_enum_input,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
+ .vidioc_log_status = vidioc_log_status,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
void cx23885_video_unregister(struct cx23885_dev *dev)
{
dprintk(1, "%s()\n", __func__);
- cx_clear(PCI_INT_MSK, 1);
+ cx23885_irq_remove(dev, 0x01);
if (dev->video_dev) {
if (video_is_registered(dev->video_dev))
VID_A_DMA_CTL, 0x11, 0x00);
/* Don't enable VBI yet */
- cx_set(PCI_INT_MSK, 1);
+
+ cx23885_irq_add_enable(dev, 0x01);
if (TUNER_ABSENT != dev->tuner_type) {
struct v4l2_subdev *sd = NULL;
u32 __iomem *lmmio;
u8 __iomem *bmmio;
int pci_irqmask;
+ spinlock_t pci_irqmask_lock; /* protects mask reg too */
int hwrevision;
/* This valud is board specific and is used to configure the
unsigned char radio_addr;
unsigned int has_radio;
struct v4l2_subdev *sd_cx25840;
+ struct work_struct cx25840_work;
/* Infrared */
struct v4l2_subdev *sd_ir;
#define call_all(dev, o, f, args...) \
v4l2_device_call_all(&dev->v4l2_dev, 0, o, f, ##args)
-#define CX23885_HW_888_IR (1 << 0)
+#define CX23885_HW_888_IR (1 << 0)
+#define CX23885_HW_AV_CORE (1 << 1)
#define call_hw(dev, grpid, o, f, args...) \
v4l2_device_call_all(&dev->v4l2_dev, grpid, o, f, ##args)
extern void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask,
int asoutput);
+extern void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask);
/* ----------------------------------------------------------- */
/* cx23885-cards.c */
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
+#include <media/ir-core.h>
#include "cx23885.h"
#define CNTRL_CPL 0x00001000
#define CNTRL_LBM 0x00002000
#define CNTRL_R 0x00004000
+/* CX23888 specific control flag */
+#define CNTRL_IVO 0x00008000
#define CX23888_IR_TXCLK_REG 0x170004
#define TXCLK_TCD 0x0000FFFF
#define CX23888_VIDCLK_FREQ 108000000 /* 108 MHz, BT.656 */
#define CX23888_IR_REFCLK_FREQ (CX23888_VIDCLK_FREQ / 2)
-#define CX23888_IR_RX_KFIFO_SIZE (512 * sizeof(u32))
-#define CX23888_IR_TX_KFIFO_SIZE (512 * sizeof(u32))
+/*
+ * We use this union internally for convenience, but callers to tx_write
+ * and rx_read will be expecting records of type struct ir_raw_event.
+ * Always ensure the size of this union is dictated by struct ir_raw_event.
+ */
+union cx23888_ir_fifo_rec {
+ u32 hw_fifo_data;
+ struct ir_raw_event ir_core_data;
+};
+
+#define CX23888_IR_RX_KFIFO_SIZE (256 * sizeof(union cx23888_ir_fifo_rec))
+#define CX23888_IR_TX_KFIFO_SIZE (256 * sizeof(union cx23888_ir_fifo_rec))
struct cx23888_ir_state {
struct v4l2_subdev sd;
invert ? CNTRL_CPL : 0);
}
+static inline void control_tx_level_invert(struct cx23885_dev *dev,
+ bool invert)
+{
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_IVO,
+ invert ? CNTRL_IVO : 0);
+}
+
/*
* IR Rx & Tx Clock Register helpers
*/
{
u64 pulse_clocks;
- if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
- ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ if (ns > IR_MAX_DURATION)
+ ns = IR_MAX_DURATION;
pulse_clocks = ns_to_pulse_clocks(ns);
*divider = pulse_clocks_to_clock_divider(pulse_clocks);
cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider);
{
u64 pulse_clocks;
- if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
- ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ if (ns > IR_MAX_DURATION)
+ ns = IR_MAX_DURATION;
pulse_clocks = ns_to_pulse_clocks(ns);
*divider = pulse_clocks_to_clock_divider(pulse_clocks);
cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider);
u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG);
u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG);
- u32 rx_data[FIFO_RX_DEPTH];
- int i, j, k;
+ union cx23888_ir_fifo_rec rx_data[FIFO_RX_DEPTH];
+ unsigned int i, j, k;
u32 events, v;
int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
for (j = 0;
(v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
v = cx23888_ir_read4(dev, CX23888_IR_FIFO_REG);
- rx_data[i++] = v & ~FIFO_RX_NDV;
+ rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV;
+ i++;
}
if (i == 0)
break;
- j = i * sizeof(u32);
+ j = i * sizeof(union cx23888_ir_fifo_rec);
k = kfifo_in_locked(&state->rx_kfifo,
(unsigned char *) rx_data, j,
&state->rx_kfifo_lock);
u16 divider = (u16) atomic_read(&state->rxclk_divider);
unsigned int i, n;
- u32 *p;
- u32 u, v;
+ union cx23888_ir_fifo_rec *p;
+ unsigned u, v;
- n = count / sizeof(u32) * sizeof(u32);
+ n = count / sizeof(union cx23888_ir_fifo_rec)
+ * sizeof(union cx23888_ir_fifo_rec);
if (n == 0) {
*num = 0;
return 0;
n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock);
- n /= sizeof(u32);
- *num = n * sizeof(u32);
+ n /= sizeof(union cx23888_ir_fifo_rec);
+ *num = n * sizeof(union cx23888_ir_fifo_rec);
+
+ for (p = (union cx23888_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) {
- for (p = (u32 *) buf, i = 0; i < n; p++, i++) {
- if ((*p & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
- *p = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
+ if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
+ /* Assume RTO was because of no IR light input */
+ u = 0;
v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n");
- continue;
+ } else {
+ u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
+ if (invert)
+ u = u ? 0 : 1;
}
- u = (*p & FIFO_RXTX_LVL) ? V4L2_SUBDEV_IR_PULSE_LEVEL_MASK : 0;
- if (invert)
- u = u ? 0 : V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
+ v = (unsigned) pulse_width_count_to_ns(
+ (u16) (p->hw_fifo_data & FIFO_RXTX), divider);
+ if (v > IR_MAX_DURATION)
+ v = IR_MAX_DURATION;
- v = (u32) pulse_width_count_to_ns((u16) (*p & FIFO_RXTX),
- divider);
- if (v >= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
- v = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS - 1;
-
- *p = u | v;
+ p->ir_core_data.pulse = u;
+ p->ir_core_data.duration = v;
v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns %s\n",
v, u ? "mark" : "space");
o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
- o->bytes_per_data_element = p->bytes_per_data_element = sizeof(u32);
+ o->bytes_per_data_element = p->bytes_per_data_element
+ = sizeof(union cx23888_ir_fifo_rec);
/* Before we tweak the hardware, we have to disable the receiver */
irqenable_rx(dev, 0);
&p->carrier_range_upper);
o->carrier_range_lower = p->carrier_range_lower;
o->carrier_range_upper = p->carrier_range_upper;
+
+ p->max_pulse_width =
+ (u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider);
} else {
p->max_pulse_width =
rxclk_rx_s_max_pulse_width(dev, p->max_pulse_width,
&rxclk_divider);
- o->max_pulse_width = p->max_pulse_width;
}
+ o->max_pulse_width = p->max_pulse_width;
atomic_set(&state->rxclk_divider, rxclk_divider);
p->noise_filter_min_width =
control_rx_s_edge_detection(dev, CNTRL_EDG_BOTH);
- o->invert = p->invert;
- atomic_set(&state->rx_invert, p->invert);
+ o->invert_level = p->invert_level;
+ atomic_set(&state->rx_invert, p->invert_level);
o->interrupt_enable = p->interrupt_enable;
o->enable = p->enable;
o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
- o->bytes_per_data_element = p->bytes_per_data_element = sizeof(u32);
+ o->bytes_per_data_element = p->bytes_per_data_element
+ = sizeof(union cx23888_ir_fifo_rec);
/* Before we tweak the hardware, we have to disable the transmitter */
irqenable_tx(dev, 0);
p->duty_cycle = cduty_tx_s_duty_cycle(dev, p->duty_cycle);
o->duty_cycle = p->duty_cycle;
+
+ p->max_pulse_width =
+ (u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider);
} else {
p->max_pulse_width =
txclk_tx_s_max_pulse_width(dev, p->max_pulse_width,
&txclk_divider);
- o->max_pulse_width = p->max_pulse_width;
}
+ o->max_pulse_width = p->max_pulse_width;
atomic_set(&state->txclk_divider, txclk_divider);
p->resolution = clock_divider_to_resolution(txclk_divider);
/* FIXME - make this dependent on resolution for better performance */
control_tx_irq_watermark(dev, TX_FIFO_HALF_EMPTY);
- control_tx_polarity_invert(dev, p->invert);
- o->invert = p->invert;
+ control_tx_polarity_invert(dev, p->invert_carrier_sense);
+ o->invert_carrier_sense = p->invert_carrier_sense;
+
+ control_tx_level_invert(dev, p->invert_level);
+ o->invert_level = p->invert_level;
o->interrupt_enable = p->interrupt_enable;
o->enable = p->enable;
"-%1d/+%1d, %u to %u Hz\n", i, j,
clock_divider_to_freq(rxclk, 16 + j),
clock_divider_to_freq(rxclk, 16 - i));
- } else {
- v4l2_info(sd, "\tMax measurable pulse width: %u us, "
- "%llu ns\n",
- pulse_width_count_to_us(FIFO_RXTX, rxclk),
- pulse_width_count_to_ns(FIFO_RXTX, rxclk));
}
+ v4l2_info(sd, "\tMax measurable pulse width: %u us, %llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, rxclk),
+ pulse_width_count_to_ns(FIFO_RXTX, rxclk));
v4l2_info(sd, "\tLow pass filter: %s\n",
filtr ? "enabled" : "disabled");
if (filtr)
cntrl & CNTRL_TFE ? "enabled" : "disabled");
v4l2_info(sd, "\tFIFO interrupt watermark: %s\n",
cntrl & CNTRL_TIC ? "not empty" : "half full or less");
- v4l2_info(sd, "\tSignal polarity: %s\n",
- cntrl & CNTRL_CPL ? "0:mark 1:space" : "0:space 1:mark");
+ v4l2_info(sd, "\tOutput pin level inversion %s\n",
+ cntrl & CNTRL_IVO ? "yes" : "no");
+ v4l2_info(sd, "\tCarrier polarity: %s\n",
+ cntrl & CNTRL_CPL ? "space:burst mark:noburst"
+ : "space:noburst mark:burst");
if (cntrl & CNTRL_MOD) {
v4l2_info(sd, "\tCarrier (16 clocks): %u Hz\n",
clock_divider_to_carrier_freq(txclk));
v4l2_info(sd, "\tCarrier duty cycle: %2u/16\n",
cduty + 1);
- } else {
- v4l2_info(sd, "\tMax pulse width: %u us, "
- "%llu ns\n",
- pulse_width_count_to_us(FIFO_RXTX, txclk),
- pulse_width_count_to_ns(FIFO_RXTX, txclk));
}
+ v4l2_info(sd, "\tMax pulse width: %u us, %llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, txclk),
+ pulse_width_count_to_ns(FIFO_RXTX, txclk));
v4l2_info(sd, "\tBusy: %s\n",
stats & STATS_TBY ? "yes" : "no");
v4l2_info(sd, "\tFIFO service requested: %s\n",
.g_register = cx23888_ir_g_register,
.s_register = cx23888_ir_s_register,
#endif
+ .interrupt_service_routine = cx23888_ir_irq_handler,
};
static const struct v4l2_subdev_ir_ops cx23888_ir_ir_ops = {
- .interrupt_service_routine = cx23888_ir_irq_handler,
-
.rx_read = cx23888_ir_rx_read,
.rx_g_parameters = cx23888_ir_rx_g_parameters,
.rx_s_parameters = cx23888_ir_rx_s_parameters,
};
static const struct v4l2_subdev_ir_parameters default_rx_params = {
- .bytes_per_data_element = sizeof(u32),
+ .bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
.enable = false,
.noise_filter_min_width = 333333, /* ns */
.carrier_range_lower = 35000,
.carrier_range_upper = 37000,
- .invert = false,
+ .invert_level = false,
};
static const struct v4l2_subdev_ir_parameters default_tx_params = {
- .bytes_per_data_element = sizeof(u32),
+ .bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
.enable = false,
.modulation = true,
.carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
.duty_cycle = 25, /* 25 % - RC-5 carrier */
- .invert = false,
+ .invert_level = false,
+ .invert_carrier_sense = false,
};
int cx23888_ir_probe(struct cx23885_dev *dev)
cx25840-objs := cx25840-core.o cx25840-audio.o cx25840-firmware.o \
- cx25840-vbi.o
+ cx25840-vbi.o cx25840-ir.o
obj-$(CONFIG_VIDEO_CX25840) += cx25840.o
cx25840_and_or(client, 0x803, ~0x10, 0x10);
}
-static int get_volume(struct i2c_client *client)
-{
- struct cx25840_state *state = to_state(i2c_get_clientdata(client));
- int vol;
-
- if (state->unmute_volume >= 0)
- return state->unmute_volume;
-
- /* Volume runs +18dB to -96dB in 1/2dB steps
- * change to fit the msp3400 -114dB to +12dB range */
-
- /* check PATH1_VOLUME */
- vol = 228 - cx25840_read(client, 0x8d4);
- vol = (vol / 2) + 23;
- return vol << 9;
-}
-
static void set_volume(struct i2c_client *client, int volume)
{
- struct cx25840_state *state = to_state(i2c_get_clientdata(client));
int vol;
- if (state->unmute_volume >= 0) {
- state->unmute_volume = volume;
- return;
- }
-
/* Convert the volume to msp3400 values (0-127) */
vol = volume >> 9;
cx25840_write(client, 0x8d4, 228 - (vol * 2));
}
-static int get_bass(struct i2c_client *client)
-{
- /* bass is 49 steps +12dB to -12dB */
-
- /* check PATH1_EQ_BASS_VOL */
- int bass = cx25840_read(client, 0x8d9) & 0x3f;
- bass = (((48 - bass) * 0xffff) + 47) / 48;
- return bass;
-}
-
-static void set_bass(struct i2c_client *client, int bass)
-{
- /* PATH1_EQ_BASS_VOL */
- cx25840_and_or(client, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff));
-}
-
-static int get_treble(struct i2c_client *client)
-{
- /* treble is 49 steps +12dB to -12dB */
-
- /* check PATH1_EQ_TREBLE_VOL */
- int treble = cx25840_read(client, 0x8db) & 0x3f;
- treble = (((48 - treble) * 0xffff) + 47) / 48;
- return treble;
-}
-
-static void set_treble(struct i2c_client *client, int treble)
-{
- /* PATH1_EQ_TREBLE_VOL */
- cx25840_and_or(client, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff));
-}
-
-static int get_balance(struct i2c_client *client)
-{
- /* balance is 7 bit, 0 to -96dB */
-
- /* check PATH1_BAL_LEVEL */
- int balance = cx25840_read(client, 0x8d5) & 0x7f;
- /* check PATH1_BAL_LEFT */
- if ((cx25840_read(client, 0x8d5) & 0x80) == 0)
- balance = 0x80 - balance;
- else
- balance = 0x80 + balance;
- return balance << 8;
-}
-
static void set_balance(struct i2c_client *client, int balance)
{
int bal = balance >> 8;
}
}
-static int get_mute(struct i2c_client *client)
-{
- struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
- return state->unmute_volume >= 0;
-}
-
-static void set_mute(struct i2c_client *client, int mute)
-{
- struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
- if (mute && state->unmute_volume == -1) {
- int vol = get_volume(client);
-
- set_volume(client, 0);
- state->unmute_volume = vol;
- }
- else if (!mute && state->unmute_volume != -1) {
- int vol = state->unmute_volume;
-
- state->unmute_volume = -1;
- set_volume(client, vol);
- }
-}
-
int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
return retval;
}
-int cx25840_audio_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int cx25840_audio_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
+ struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
switch (ctrl->id) {
case V4L2_CID_AUDIO_VOLUME:
- ctrl->value = get_volume(client);
+ if (state->mute->val)
+ set_volume(client, 0);
+ else
+ set_volume(client, state->volume->val);
break;
case V4L2_CID_AUDIO_BASS:
- ctrl->value = get_bass(client);
+ /* PATH1_EQ_BASS_VOL */
+ cx25840_and_or(client, 0x8d9, ~0x3f,
+ 48 - (ctrl->val * 48 / 0xffff));
break;
case V4L2_CID_AUDIO_TREBLE:
- ctrl->value = get_treble(client);
+ /* PATH1_EQ_TREBLE_VOL */
+ cx25840_and_or(client, 0x8db, ~0x3f,
+ 48 - (ctrl->val * 48 / 0xffff));
break;
case V4L2_CID_AUDIO_BALANCE:
- ctrl->value = get_balance(client);
- break;
- case V4L2_CID_AUDIO_MUTE:
- ctrl->value = get_mute(client);
+ set_balance(client, ctrl->val);
break;
default:
return -EINVAL;
return 0;
}
-int cx25840_audio_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_VOLUME:
- set_volume(client, ctrl->value);
- break;
- case V4L2_CID_AUDIO_BASS:
- set_bass(client, ctrl->value);
- break;
- case V4L2_CID_AUDIO_TREBLE:
- set_treble(client, ctrl->value);
- break;
- case V4L2_CID_AUDIO_BALANCE:
- set_balance(client, ctrl->value);
- break;
- case V4L2_CID_AUDIO_MUTE:
- set_mute(client, ctrl->value);
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
+const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops = {
+ .s_ctrl = cx25840_audio_s_ctrl,
+};
*
* CX23885 support by Steven Toth <stoth@linuxtv.org>.
*
+ * CX2388[578] IRQ handling, IO Pin mux configuration and other small fixes are
+ * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
MODULE_AUTHOR("Ulf Eklund, Chris Kennedy, Hans Verkuil, Tyler Trafford");
MODULE_LICENSE("GPL");
+#define CX25840_VID_INT_STAT_REG 0x410
+#define CX25840_VID_INT_STAT_BITS 0x0000ffff
+#define CX25840_VID_INT_MASK_BITS 0xffff0000
+#define CX25840_VID_INT_MASK_SHFT 16
+#define CX25840_VID_INT_MASK_REG 0x412
+
+#define CX23885_AUD_MC_INT_MASK_REG 0x80c
+#define CX23885_AUD_MC_INT_STAT_BITS 0xffff0000
+#define CX23885_AUD_MC_INT_CTRL_BITS 0x0000ffff
+#define CX23885_AUD_MC_INT_STAT_SHFT 16
+
+#define CX25840_AUD_INT_CTRL_REG 0x812
+#define CX25840_AUD_INT_STAT_REG 0x813
+
+#define CX23885_PIN_CTRL_IRQ_REG 0x123
+#define CX23885_PIN_CTRL_IRQ_IR_STAT 0x40
+#define CX23885_PIN_CTRL_IRQ_AUD_STAT 0x20
+#define CX23885_PIN_CTRL_IRQ_VID_STAT 0x10
+
+#define CX25840_IR_STATS_REG 0x210
+#define CX25840_IR_IRQEN_REG 0x214
+
static int cx25840_debug;
module_param_named(debug,cx25840_debug, int, 0644);
u8 cx25840_read(struct i2c_client * client, u16 addr)
{
- u8 buffer[2];
- buffer[0] = addr >> 8;
- buffer[1] = addr & 0xff;
-
- if (i2c_master_send(client, buffer, 2) < 2)
- return 0;
-
- if (i2c_master_recv(client, buffer, 1) < 1)
+ struct i2c_msg msgs[2];
+ u8 tx_buf[2], rx_buf[1];
+
+ /* Write register address */
+ tx_buf[0] = addr >> 8;
+ tx_buf[1] = addr & 0xff;
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = 2;
+ msgs[0].buf = (char *) tx_buf;
+
+ /* Read data from register */
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = 1;
+ msgs[1].buf = (char *) rx_buf;
+
+ if (i2c_transfer(client->adapter, msgs, 2) < 2)
return 0;
- return buffer[0];
+ return rx_buf[0];
}
u32 cx25840_read4(struct i2c_client * client, u16 addr)
{
- u8 buffer[4];
- buffer[0] = addr >> 8;
- buffer[1] = addr & 0xff;
-
- if (i2c_master_send(client, buffer, 2) < 2)
- return 0;
-
- if (i2c_master_recv(client, buffer, 4) < 4)
+ struct i2c_msg msgs[2];
+ u8 tx_buf[2], rx_buf[4];
+
+ /* Write register address */
+ tx_buf[0] = addr >> 8;
+ tx_buf[1] = addr & 0xff;
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = 2;
+ msgs[0].buf = (char *) tx_buf;
+
+ /* Read data from registers */
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = 4;
+ msgs[1].buf = (char *) rx_buf;
+
+ if (i2c_transfer(client->adapter, msgs, 2) < 2)
return 0;
- return (buffer[3] << 24) | (buffer[2] << 16) |
- (buffer[1] << 8) | buffer[0];
+ return (rx_buf[3] << 24) | (rx_buf[2] << 16) | (rx_buf[1] << 8) |
+ rx_buf[0];
}
int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask,
or_value);
}
+int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask,
+ u32 or_value)
+{
+ return cx25840_write4(client, addr,
+ (cx25840_read4(client, addr) & and_mask) |
+ or_value);
+}
+
/* ----------------------------------------------------------------------- */
static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input,
/* ----------------------------------------------------------------------- */
+static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
+ struct v4l2_subdev_io_pin_config *p)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int i;
+ u32 pin_ctrl;
+ u8 gpio_oe, gpio_data, strength;
+
+ pin_ctrl = cx25840_read4(client, 0x120);
+ gpio_oe = cx25840_read(client, 0x160);
+ gpio_data = cx25840_read(client, 0x164);
+
+ for (i = 0; i < n; i++) {
+ strength = p[i].strength;
+ if (strength > CX25840_PIN_DRIVE_FAST)
+ strength = CX25840_PIN_DRIVE_FAST;
+
+ switch (p[i].pin) {
+ case CX23885_PIN_IRQ_N_GPIO16:
+ if (p[i].function != CX23885_PAD_IRQ_N) {
+ /* GPIO16 */
+ pin_ctrl &= ~(0x1 << 25);
+ } else {
+ /* IRQ_N */
+ if (p[i].flags &
+ (V4L2_SUBDEV_IO_PIN_DISABLE |
+ V4L2_SUBDEV_IO_PIN_INPUT)) {
+ pin_ctrl &= ~(0x1 << 25);
+ } else {
+ pin_ctrl |= (0x1 << 25);
+ }
+ if (p[i].flags &
+ V4L2_SUBDEV_IO_PIN_ACTIVE_LOW) {
+ pin_ctrl &= ~(0x1 << 24);
+ } else {
+ pin_ctrl |= (0x1 << 24);
+ }
+ }
+ break;
+ case CX23885_PIN_IR_RX_GPIO19:
+ if (p[i].function != CX23885_PAD_GPIO19) {
+ /* IR_RX */
+ gpio_oe |= (0x1 << 0);
+ pin_ctrl &= ~(0x3 << 18);
+ pin_ctrl |= (strength << 18);
+ } else {
+ /* GPIO19 */
+ gpio_oe &= ~(0x1 << 0);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+ gpio_data &= ~(0x1 << 0);
+ gpio_data |= ((p[i].value & 0x1) << 0);
+ }
+ pin_ctrl &= ~(0x3 << 12);
+ pin_ctrl |= (strength << 12);
+ }
+ break;
+ case CX23885_PIN_IR_TX_GPIO20:
+ if (p[i].function != CX23885_PAD_GPIO20) {
+ /* IR_TX */
+ gpio_oe |= (0x1 << 1);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_DISABLE)
+ pin_ctrl &= ~(0x1 << 10);
+ else
+ pin_ctrl |= (0x1 << 10);
+ pin_ctrl &= ~(0x3 << 18);
+ pin_ctrl |= (strength << 18);
+ } else {
+ /* GPIO20 */
+ gpio_oe &= ~(0x1 << 1);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+ gpio_data &= ~(0x1 << 1);
+ gpio_data |= ((p[i].value & 0x1) << 1);
+ }
+ pin_ctrl &= ~(0x3 << 12);
+ pin_ctrl |= (strength << 12);
+ }
+ break;
+ case CX23885_PIN_I2S_SDAT_GPIO21:
+ if (p[i].function != CX23885_PAD_GPIO21) {
+ /* I2S_SDAT */
+ /* TODO: Input or Output config */
+ gpio_oe |= (0x1 << 2);
+ pin_ctrl &= ~(0x3 << 22);
+ pin_ctrl |= (strength << 22);
+ } else {
+ /* GPIO21 */
+ gpio_oe &= ~(0x1 << 2);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+ gpio_data &= ~(0x1 << 2);
+ gpio_data |= ((p[i].value & 0x1) << 2);
+ }
+ pin_ctrl &= ~(0x3 << 12);
+ pin_ctrl |= (strength << 12);
+ }
+ break;
+ case CX23885_PIN_I2S_WCLK_GPIO22:
+ if (p[i].function != CX23885_PAD_GPIO22) {
+ /* I2S_WCLK */
+ /* TODO: Input or Output config */
+ gpio_oe |= (0x1 << 3);
+ pin_ctrl &= ~(0x3 << 22);
+ pin_ctrl |= (strength << 22);
+ } else {
+ /* GPIO22 */
+ gpio_oe &= ~(0x1 << 3);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+ gpio_data &= ~(0x1 << 3);
+ gpio_data |= ((p[i].value & 0x1) << 3);
+ }
+ pin_ctrl &= ~(0x3 << 12);
+ pin_ctrl |= (strength << 12);
+ }
+ break;
+ case CX23885_PIN_I2S_BCLK_GPIO23:
+ if (p[i].function != CX23885_PAD_GPIO23) {
+ /* I2S_BCLK */
+ /* TODO: Input or Output config */
+ gpio_oe |= (0x1 << 4);
+ pin_ctrl &= ~(0x3 << 22);
+ pin_ctrl |= (strength << 22);
+ } else {
+ /* GPIO23 */
+ gpio_oe &= ~(0x1 << 4);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+ gpio_data &= ~(0x1 << 4);
+ gpio_data |= ((p[i].value & 0x1) << 4);
+ }
+ pin_ctrl &= ~(0x3 << 12);
+ pin_ctrl |= (strength << 12);
+ }
+ break;
+ }
+ }
+
+ cx25840_write(client, 0x164, gpio_data);
+ cx25840_write(client, 0x160, gpio_oe);
+ cx25840_write4(client, 0x120, pin_ctrl);
+ return 0;
+}
+
+static int common_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
+ struct v4l2_subdev_io_pin_config *pincfg)
+{
+ struct cx25840_state *state = to_state(sd);
+
+ if (is_cx2388x(state))
+ return cx23885_s_io_pin_config(sd, n, pincfg);
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
static void init_dll1(struct i2c_client *client)
{
/* This is the Hauppauge sequence used to
/* start microcontroller */
cx25840_and_or(client, 0x803, ~0x10, 0x10);
+
+ /* Disable and clear video interrupts - we don't use them */
+ cx25840_write4(client, CX25840_VID_INT_STAT_REG, 0xffffffff);
+
+ /* Disable and clear audio interrupts - we don't use them */
+ cx25840_write(client, CX25840_AUD_INT_CTRL_REG, 0xff);
+ cx25840_write(client, CX25840_AUD_INT_STAT_REG, 0xff);
}
/* ----------------------------------------------------------------------- */
/* ----------------------------------------------------------------------- */
-static int cx25840_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl)
{
- struct cx25840_state *state = to_state(sd);
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct i2c_client *client = v4l2_get_subdevdata(sd);
switch (ctrl->id) {
- case CX25840_CID_ENABLE_PVR150_WORKAROUND:
- state->pvr150_workaround = ctrl->value;
- set_input(client, state->vid_input, state->aud_input);
- break;
-
case V4L2_CID_BRIGHTNESS:
- if (ctrl->value < 0 || ctrl->value > 255) {
- v4l_err(client, "invalid brightness setting %d\n",
- ctrl->value);
- return -ERANGE;
- }
-
- cx25840_write(client, 0x414, ctrl->value - 128);
+ cx25840_write(client, 0x414, ctrl->val - 128);
break;
case V4L2_CID_CONTRAST:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l_err(client, "invalid contrast setting %d\n",
- ctrl->value);
- return -ERANGE;
- }
-
- cx25840_write(client, 0x415, ctrl->value << 1);
+ cx25840_write(client, 0x415, ctrl->val << 1);
break;
case V4L2_CID_SATURATION:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l_err(client, "invalid saturation setting %d\n",
- ctrl->value);
- return -ERANGE;
- }
-
- cx25840_write(client, 0x420, ctrl->value << 1);
- cx25840_write(client, 0x421, ctrl->value << 1);
+ cx25840_write(client, 0x420, ctrl->val << 1);
+ cx25840_write(client, 0x421, ctrl->val << 1);
break;
case V4L2_CID_HUE:
- if (ctrl->value < -128 || ctrl->value > 127) {
- v4l_err(client, "invalid hue setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- cx25840_write(client, 0x422, ctrl->value);
+ cx25840_write(client, 0x422, ctrl->val);
break;
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_MUTE:
- if (is_cx2583x(state))
- return -EINVAL;
- return cx25840_audio_s_ctrl(sd, ctrl);
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int cx25840_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct cx25840_state *state = to_state(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- switch (ctrl->id) {
- case CX25840_CID_ENABLE_PVR150_WORKAROUND:
- ctrl->value = state->pvr150_workaround;
- break;
- case V4L2_CID_BRIGHTNESS:
- ctrl->value = (s8)cx25840_read(client, 0x414) + 128;
- break;
- case V4L2_CID_CONTRAST:
- ctrl->value = cx25840_read(client, 0x415) >> 1;
- break;
- case V4L2_CID_SATURATION:
- ctrl->value = cx25840_read(client, 0x420) >> 1;
- break;
- case V4L2_CID_HUE:
- ctrl->value = (s8)cx25840_read(client, 0x422);
- break;
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_MUTE:
- if (is_cx2583x(state))
- return -EINVAL;
- return cx25840_audio_g_ctrl(sd, ctrl);
default:
return -EINVAL;
}
default: p = "not defined";
}
v4l_info(client, "Detected audio standard: %s\n", p);
- v4l_info(client, "Audio muted: %s\n",
- (state->unmute_volume >= 0) ? "yes" : "no");
v4l_info(client, "Audio microcontroller: %s\n",
(download_ctl & 0x10) ?
((mute_ctl & 0x2) ? "detecting" : "running") : "stopped");
return 0;
}
-static int cx25840_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- struct cx25840_state *state = to_state(sd);
-
- switch (qc->id) {
- case V4L2_CID_BRIGHTNESS:
- return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
- case V4L2_CID_CONTRAST:
- case V4L2_CID_SATURATION:
- return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64);
- case V4L2_CID_HUE:
- return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0);
- default:
- break;
- }
- if (is_cx2583x(state))
- return -EINVAL;
-
- switch (qc->id) {
- case V4L2_CID_AUDIO_VOLUME:
- return v4l2_ctrl_query_fill(qc, 0, 65535,
- 65535 / 100, state->default_volume);
- case V4L2_CID_AUDIO_MUTE:
- return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
- default:
- return -EINVAL;
- }
- return -EINVAL;
-}
-
static int cx25840_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct cx25840_state *state = to_state(sd);
log_video_status(client);
if (!is_cx2583x(state))
log_audio_status(client);
+ cx25840_ir_log_status(sd);
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
+ return 0;
+}
+
+static int cx25840_s_config(struct v4l2_subdev *sd, int irq, void *platform_data)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (platform_data) {
+ struct cx25840_platform_data *pdata = platform_data;
+
+ state->pvr150_workaround = pdata->pvr150_workaround;
+ set_input(client, state->vid_input, state->aud_input);
+ }
return 0;
}
+static int cx23885_irq_handler(struct v4l2_subdev *sd, u32 status,
+ bool *handled)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+ u8 irq_stat, aud_stat, aud_en, ir_stat, ir_en;
+ u32 vid_stat, aud_mc_stat;
+ bool block_handled;
+ int ret = 0;
+
+ irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG);
+ v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (entry): %s %s %s\n",
+ irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : " ",
+ irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : " ",
+ irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : " ");
+
+ if ((is_cx23885(state) || is_cx23887(state))) {
+ ir_stat = cx25840_read(c, CX25840_IR_STATS_REG);
+ ir_en = cx25840_read(c, CX25840_IR_IRQEN_REG);
+ v4l_dbg(2, cx25840_debug, c,
+ "AV Core ir IRQ status: %#04x disables: %#04x\n",
+ ir_stat, ir_en);
+ if (irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT) {
+ block_handled = false;
+ ret = cx25840_ir_irq_handler(sd,
+ status, &block_handled);
+ if (block_handled)
+ *handled = true;
+ }
+ }
+
+ aud_stat = cx25840_read(c, CX25840_AUD_INT_STAT_REG);
+ aud_en = cx25840_read(c, CX25840_AUD_INT_CTRL_REG);
+ v4l_dbg(2, cx25840_debug, c,
+ "AV Core audio IRQ status: %#04x disables: %#04x\n",
+ aud_stat, aud_en);
+ aud_mc_stat = cx25840_read4(c, CX23885_AUD_MC_INT_MASK_REG);
+ v4l_dbg(2, cx25840_debug, c,
+ "AV Core audio MC IRQ status: %#06x enables: %#06x\n",
+ aud_mc_stat >> CX23885_AUD_MC_INT_STAT_SHFT,
+ aud_mc_stat & CX23885_AUD_MC_INT_CTRL_BITS);
+ if (irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT) {
+ if (aud_stat) {
+ cx25840_write(c, CX25840_AUD_INT_STAT_REG, aud_stat);
+ *handled = true;
+ }
+ }
+
+ vid_stat = cx25840_read4(c, CX25840_VID_INT_STAT_REG);
+ v4l_dbg(2, cx25840_debug, c,
+ "AV Core video IRQ status: %#06x disables: %#06x\n",
+ vid_stat & CX25840_VID_INT_STAT_BITS,
+ vid_stat >> CX25840_VID_INT_MASK_SHFT);
+ if (irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT) {
+ if (vid_stat & CX25840_VID_INT_STAT_BITS) {
+ cx25840_write4(c, CX25840_VID_INT_STAT_REG, vid_stat);
+ *handled = true;
+ }
+ }
+
+ irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG);
+ v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (exit): %s %s %s\n",
+ irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : " ",
+ irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : " ",
+ irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : " ");
+
+ return ret;
+}
+
+static int cx25840_irq_handler(struct v4l2_subdev *sd, u32 status,
+ bool *handled)
+{
+ struct cx25840_state *state = to_state(sd);
+
+ *handled = false;
+
+ /* Only support the CX2388[578] AV Core for now */
+ if (is_cx2388x(state))
+ return cx23885_irq_handler(sd, status, handled);
+
+ return -ENODEV;
+}
+
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops cx25840_ctrl_ops = {
+ .s_ctrl = cx25840_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops cx25840_core_ops = {
.log_status = cx25840_log_status,
+ .s_config = cx25840_s_config,
.g_chip_ident = cx25840_g_chip_ident,
- .g_ctrl = cx25840_g_ctrl,
- .s_ctrl = cx25840_s_ctrl,
- .queryctrl = cx25840_queryctrl,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
.s_std = cx25840_s_std,
.reset = cx25840_reset,
.load_fw = cx25840_load_fw,
+ .s_io_pin_config = common_s_io_pin_config,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = cx25840_g_register,
.s_register = cx25840_s_register,
#endif
+ .interrupt_service_routine = cx25840_irq_handler,
};
static const struct v4l2_subdev_tuner_ops cx25840_tuner_ops = {
.audio = &cx25840_audio_ops,
.video = &cx25840_video_ops,
.vbi = &cx25840_vbi_ops,
+ .ir = &cx25840_ir_ops,
};
/* ----------------------------------------------------------------------- */
{
struct cx25840_state *state;
struct v4l2_subdev *sd;
+ int default_volume;
u32 id = V4L2_IDENT_NONE;
u16 device_id;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &cx25840_ops);
+
switch (id) {
case V4L2_IDENT_CX23885_AV:
v4l_info(client, "cx23885 A/V decoder found @ 0x%x (%s)\n",
state->audclk_freq = 48000;
state->pvr150_workaround = 0;
state->audmode = V4L2_TUNER_MODE_LANG1;
- state->unmute_volume = -1;
- state->default_volume = 228 - cx25840_read(client, 0x8d4);
- state->default_volume = ((state->default_volume / 2) + 23) << 9;
state->vbi_line_offset = 8;
state->id = id;
state->rev = device_id;
+ v4l2_ctrl_handler_init(&state->hdl, 9);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 127, 1, 64);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 127, 1, 64);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+ V4L2_CID_HUE, -128, 127, 1, 0);
+ if (!is_cx2583x(state)) {
+ default_volume = 228 - cx25840_read(client, 0x8d4);
+ default_volume = ((default_volume / 2) + 23) << 9;
+
+ state->volume = v4l2_ctrl_new_std(&state->hdl,
+ &cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
+ 0, 65335, 65535 / 100, default_volume);
+ state->mute = v4l2_ctrl_new_std(&state->hdl,
+ &cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
+ 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
+ V4L2_CID_AUDIO_BALANCE,
+ 0, 65535, 65535 / 100, 32768);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
+ V4L2_CID_AUDIO_BASS,
+ 0, 65535, 65535 / 100, 32768);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
+ V4L2_CID_AUDIO_TREBLE,
+ 0, 65535, 65535 / 100, 32768);
+ }
+ sd->ctrl_handler = &state->hdl;
+ if (state->hdl.error) {
+ int err = state->hdl.error;
+
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
+ return err;
+ }
+ v4l2_ctrl_cluster(2, &state->volume);
+ v4l2_ctrl_handler_setup(&state->hdl);
+ cx25840_ir_probe(sd);
return 0;
}
static int cx25840_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct cx25840_state *state = to_state(sd);
+ cx25840_ir_remove(sd);
v4l2_device_unregister_subdev(sd);
- kfree(to_state(sd));
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
return 0;
}
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
#include <linux/i2c.h>
-/* ENABLE_PVR150_WORKAROUND activates a workaround for a hardware bug that is
- present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
- certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
- audio autodetect fails on some channels for these models and the workaround
- is to select the audio standard explicitly. Many thanks to Hauppauge for
- providing this information. */
-#define CX25840_CID_ENABLE_PVR150_WORKAROUND (V4L2_CID_PRIVATE_BASE+0)
+struct cx25840_ir_state;
struct cx25840_state {
struct i2c_client *c;
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+ struct {
+ /* volume cluster */
+ struct v4l2_ctrl *volume;
+ struct v4l2_ctrl *mute;
+ };
int pvr150_workaround;
int radio;
v4l2_std_id std;
enum cx25840_audio_input aud_input;
u32 audclk_freq;
int audmode;
- int unmute_volume; /* -1 if not muted */
- int default_volume;
int vbi_line_offset;
u32 id;
u32 rev;
int is_initialized;
wait_queue_head_t fw_wait; /* wake up when the fw load is finished */
struct work_struct fw_work; /* work entry for fw load */
+ struct cx25840_ir_state *ir_state;
};
static inline struct cx25840_state *to_state(struct v4l2_subdev *sd)
return container_of(sd, struct cx25840_state, sd);
}
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct cx25840_state, hdl)->sd;
+}
+
static inline bool is_cx2583x(struct cx25840_state *state)
{
return state->id == V4L2_IDENT_CX25836 ||
state->id == V4L2_IDENT_CX23888_AV;
}
+static inline bool is_cx23885(struct cx25840_state *state)
+{
+ return state->id == V4L2_IDENT_CX23885_AV;
+}
+
+static inline bool is_cx23887(struct cx25840_state *state)
+{
+ return state->id == V4L2_IDENT_CX23887_AV;
+}
+
+static inline bool is_cx23888(struct cx25840_state *state)
+{
+ return state->id == V4L2_IDENT_CX23888_AV;
+}
+
/* ----------------------------------------------------------------------- */
/* cx25850-core.c */
int cx25840_write(struct i2c_client *client, u16 addr, u8 value);
u8 cx25840_read(struct i2c_client *client, u16 addr);
u32 cx25840_read4(struct i2c_client *client, u16 addr);
int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned mask, u8 value);
+int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask,
+ u32 or_value);
void cx25840_std_setup(struct i2c_client *client);
/* ----------------------------------------------------------------------- */
/* cx25850-audio.c */
void cx25840_audio_set_path(struct i2c_client *client);
int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq);
-int cx25840_audio_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
-int cx25840_audio_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+
+extern const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops;
/* ----------------------------------------------------------------------- */
/* cx25850-vbi.c */
int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
int cx25840_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi);
+/* ----------------------------------------------------------------------- */
+/* cx25850-ir.c */
+extern const struct v4l2_subdev_ir_ops cx25840_ir_ops;
+int cx25840_ir_log_status(struct v4l2_subdev *sd);
+int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled);
+int cx25840_ir_probe(struct v4l2_subdev *sd);
+int cx25840_ir_remove(struct v4l2_subdev *sd);
+
#endif
--- /dev/null
+/*
+ * Driver for the Conexant CX2584x Audio/Video decoder chip and related cores
+ *
+ * Integrated Consumer Infrared Controller
+ *
+ * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/kfifo.h>
+#include <media/cx25840.h>
+#include <media/ir-core.h>
+
+#include "cx25840-core.h"
+
+static unsigned int ir_debug;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "enable integrated IR debug messages");
+
+#define CX25840_IR_REG_BASE 0x200
+
+#define CX25840_IR_CNTRL_REG 0x200
+#define CNTRL_WIN_3_3 0x00000000
+#define CNTRL_WIN_4_3 0x00000001
+#define CNTRL_WIN_3_4 0x00000002
+#define CNTRL_WIN_4_4 0x00000003
+#define CNTRL_WIN 0x00000003
+#define CNTRL_EDG_NONE 0x00000000
+#define CNTRL_EDG_FALL 0x00000004
+#define CNTRL_EDG_RISE 0x00000008
+#define CNTRL_EDG_BOTH 0x0000000C
+#define CNTRL_EDG 0x0000000C
+#define CNTRL_DMD 0x00000010
+#define CNTRL_MOD 0x00000020
+#define CNTRL_RFE 0x00000040
+#define CNTRL_TFE 0x00000080
+#define CNTRL_RXE 0x00000100
+#define CNTRL_TXE 0x00000200
+#define CNTRL_RIC 0x00000400
+#define CNTRL_TIC 0x00000800
+#define CNTRL_CPL 0x00001000
+#define CNTRL_LBM 0x00002000
+#define CNTRL_R 0x00004000
+
+#define CX25840_IR_TXCLK_REG 0x204
+#define TXCLK_TCD 0x0000FFFF
+
+#define CX25840_IR_RXCLK_REG 0x208
+#define RXCLK_RCD 0x0000FFFF
+
+#define CX25840_IR_CDUTY_REG 0x20C
+#define CDUTY_CDC 0x0000000F
+
+#define CX25840_IR_STATS_REG 0x210
+#define STATS_RTO 0x00000001
+#define STATS_ROR 0x00000002
+#define STATS_RBY 0x00000004
+#define STATS_TBY 0x00000008
+#define STATS_RSR 0x00000010
+#define STATS_TSR 0x00000020
+
+#define CX25840_IR_IRQEN_REG 0x214
+#define IRQEN_RTE 0x00000001
+#define IRQEN_ROE 0x00000002
+#define IRQEN_RSE 0x00000010
+#define IRQEN_TSE 0x00000020
+#define IRQEN_MSK 0x00000033
+
+#define CX25840_IR_FILTR_REG 0x218
+#define FILTR_LPF 0x0000FFFF
+
+#define CX25840_IR_FIFO_REG 0x23C
+#define FIFO_RXTX 0x0000FFFF
+#define FIFO_RXTX_LVL 0x00010000
+#define FIFO_RXTX_RTO 0x0001FFFF
+#define FIFO_RX_NDV 0x00020000
+#define FIFO_RX_DEPTH 8
+#define FIFO_TX_DEPTH 8
+
+#define CX25840_VIDCLK_FREQ 108000000 /* 108 MHz, BT.656 */
+#define CX25840_IR_REFCLK_FREQ (CX25840_VIDCLK_FREQ / 2)
+
+/*
+ * We use this union internally for convenience, but callers to tx_write
+ * and rx_read will be expecting records of type struct ir_raw_event.
+ * Always ensure the size of this union is dictated by struct ir_raw_event.
+ */
+union cx25840_ir_fifo_rec {
+ u32 hw_fifo_data;
+ struct ir_raw_event ir_core_data;
+};
+
+#define CX25840_IR_RX_KFIFO_SIZE (256 * sizeof(union cx25840_ir_fifo_rec))
+#define CX25840_IR_TX_KFIFO_SIZE (256 * sizeof(union cx25840_ir_fifo_rec))
+
+struct cx25840_ir_state {
+ struct i2c_client *c;
+
+ struct v4l2_subdev_ir_parameters rx_params;
+ struct mutex rx_params_lock; /* protects Rx parameter settings cache */
+ atomic_t rxclk_divider;
+ atomic_t rx_invert;
+
+ struct kfifo rx_kfifo;
+ spinlock_t rx_kfifo_lock; /* protect Rx data kfifo */
+
+ struct v4l2_subdev_ir_parameters tx_params;
+ struct mutex tx_params_lock; /* protects Tx parameter settings cache */
+ atomic_t txclk_divider;
+};
+
+static inline struct cx25840_ir_state *to_ir_state(struct v4l2_subdev *sd)
+{
+ struct cx25840_state *state = to_state(sd);
+ return state ? state->ir_state : NULL;
+}
+
+
+/*
+ * Rx and Tx Clock Divider register computations
+ *
+ * Note the largest clock divider value of 0xffff corresponds to:
+ * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_clock_divider(unsigned int d)
+{
+ if (d > RXCLK_RCD + 1)
+ d = RXCLK_RCD;
+ else if (d < 2)
+ d = 1;
+ else
+ d--;
+ return (u16) d;
+}
+
+static inline u16 ns_to_clock_divider(unsigned int ns)
+{
+ return count_to_clock_divider(
+ DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000));
+}
+
+static inline unsigned int clock_divider_to_ns(unsigned int divider)
+{
+ /* Period of the Rx or Tx clock in ns */
+ return DIV_ROUND_CLOSEST((divider + 1) * 1000,
+ CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+static inline u16 carrier_freq_to_clock_divider(unsigned int freq)
+{
+ return count_to_clock_divider(
+ DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * 16));
+}
+
+static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider)
+{
+ return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, (divider + 1) * 16);
+}
+
+static inline u16 freq_to_clock_divider(unsigned int freq,
+ unsigned int rollovers)
+{
+ return count_to_clock_divider(
+ DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * rollovers));
+}
+
+static inline unsigned int clock_divider_to_freq(unsigned int divider,
+ unsigned int rollovers)
+{
+ return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ,
+ (divider + 1) * rollovers);
+}
+
+/*
+ * Low Pass Filter register calculations
+ *
+ * Note the largest count value of 0xffff corresponds to:
+ * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_lpf_count(unsigned int d)
+{
+ if (d > FILTR_LPF)
+ d = FILTR_LPF;
+ else if (d < 4)
+ d = 0;
+ return (u16) d;
+}
+
+static inline u16 ns_to_lpf_count(unsigned int ns)
+{
+ return count_to_lpf_count(
+ DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000));
+}
+
+static inline unsigned int lpf_count_to_ns(unsigned int count)
+{
+ /* Duration of the Low Pass Filter rejection window in ns */
+ return DIV_ROUND_CLOSEST(count * 1000,
+ CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+static inline unsigned int lpf_count_to_us(unsigned int count)
+{
+ /* Duration of the Low Pass Filter rejection window in us */
+ return DIV_ROUND_CLOSEST(count, CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+/*
+ * FIFO register pulse width count compuations
+ */
+static u32 clock_divider_to_resolution(u16 divider)
+{
+ /*
+ * Resolution is the duration of 1 tick of the readable portion of
+ * of the pulse width counter as read from the FIFO. The two lsb's are
+ * not readable, hence the << 2. This function returns ns.
+ */
+ return DIV_ROUND_CLOSEST((1 << 2) * ((u32) divider + 1) * 1000,
+ CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+static u64 pulse_width_count_to_ns(u16 count, u16 divider)
+{
+ u64 n;
+ u32 rem;
+
+ /*
+ * The 2 lsb's of the pulse width timer count are not readable, hence
+ * the (count << 2) | 0x3
+ */
+ n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */
+ rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000); /* / MHz => ns */
+ if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2)
+ n++;
+ return n;
+}
+
+#if 0
+/* Keep as we will need this for Transmit functionality */
+static u16 ns_to_pulse_width_count(u32 ns, u16 divider)
+{
+ u64 n;
+ u32 d;
+ u32 rem;
+
+ /*
+ * The 2 lsb's of the pulse width timer count are not accessable, hence
+ * the (1 << 2)
+ */
+ n = ((u64) ns) * CX25840_IR_REFCLK_FREQ / 1000000; /* millicycles */
+ d = (1 << 2) * ((u32) divider + 1) * 1000; /* millicycles/count */
+ rem = do_div(n, d);
+ if (rem >= d / 2)
+ n++;
+
+ if (n > FIFO_RXTX)
+ n = FIFO_RXTX;
+ else if (n == 0)
+ n = 1;
+ return (u16) n;
+}
+
+#endif
+static unsigned int pulse_width_count_to_us(u16 count, u16 divider)
+{
+ u64 n;
+ u32 rem;
+
+ /*
+ * The 2 lsb's of the pulse width timer count are not readable, hence
+ * the (count << 2) | 0x3
+ */
+ n = (((u64) count << 2) | 0x3) * (divider + 1); /* cycles */
+ rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000); /* / MHz => us */
+ if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2)
+ n++;
+ return (unsigned int) n;
+}
+
+/*
+ * Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts
+ *
+ * The total pulse clock count is an 18 bit pulse width timer count as the most
+ * significant part and (up to) 16 bit clock divider count as a modulus.
+ * When the Rx clock divider ticks down to 0, it increments the 18 bit pulse
+ * width timer count's least significant bit.
+ */
+static u64 ns_to_pulse_clocks(u32 ns)
+{
+ u64 clocks;
+ u32 rem;
+ clocks = CX25840_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles */
+ rem = do_div(clocks, 1000); /* /1000 = cycles */
+ if (rem >= 1000 / 2)
+ clocks++;
+ return clocks;
+}
+
+static u16 pulse_clocks_to_clock_divider(u64 count)
+{
+ u32 rem;
+
+ rem = do_div(count, (FIFO_RXTX << 2) | 0x3);
+
+ /* net result needs to be rounded down and decremented by 1 */
+ if (count > RXCLK_RCD + 1)
+ count = RXCLK_RCD;
+ else if (count < 2)
+ count = 1;
+ else
+ count--;
+ return (u16) count;
+}
+
+/*
+ * IR Control Register helpers
+ */
+enum tx_fifo_watermark {
+ TX_FIFO_HALF_EMPTY = 0,
+ TX_FIFO_EMPTY = CNTRL_TIC,
+};
+
+enum rx_fifo_watermark {
+ RX_FIFO_HALF_FULL = 0,
+ RX_FIFO_NOT_EMPTY = CNTRL_RIC,
+};
+
+static inline void control_tx_irq_watermark(struct i2c_client *c,
+ enum tx_fifo_watermark level)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_TIC, level);
+}
+
+static inline void control_rx_irq_watermark(struct i2c_client *c,
+ enum rx_fifo_watermark level)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_RIC, level);
+}
+
+static inline void control_tx_enable(struct i2c_client *c, bool enable)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE),
+ enable ? (CNTRL_TXE | CNTRL_TFE) : 0);
+}
+
+static inline void control_rx_enable(struct i2c_client *c, bool enable)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE),
+ enable ? (CNTRL_RXE | CNTRL_RFE) : 0);
+}
+
+static inline void control_tx_modulation_enable(struct i2c_client *c,
+ bool enable)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_MOD,
+ enable ? CNTRL_MOD : 0);
+}
+
+static inline void control_rx_demodulation_enable(struct i2c_client *c,
+ bool enable)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_DMD,
+ enable ? CNTRL_DMD : 0);
+}
+
+static inline void control_rx_s_edge_detection(struct i2c_client *c,
+ u32 edge_types)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_EDG_BOTH,
+ edge_types & CNTRL_EDG_BOTH);
+}
+
+static void control_rx_s_carrier_window(struct i2c_client *c,
+ unsigned int carrier,
+ unsigned int *carrier_range_low,
+ unsigned int *carrier_range_high)
+{
+ u32 v;
+ unsigned int c16 = carrier * 16;
+
+ if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) {
+ v = CNTRL_WIN_3_4;
+ *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4);
+ } else {
+ v = CNTRL_WIN_3_3;
+ *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3);
+ }
+
+ if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) {
+ v |= CNTRL_WIN_4_3;
+ *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4);
+ } else {
+ v |= CNTRL_WIN_3_3;
+ *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3);
+ }
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_WIN, v);
+}
+
+static inline void control_tx_polarity_invert(struct i2c_client *c,
+ bool invert)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_CPL,
+ invert ? CNTRL_CPL : 0);
+}
+
+/*
+ * IR Rx & Tx Clock Register helpers
+ */
+static unsigned int txclk_tx_s_carrier(struct i2c_client *c,
+ unsigned int freq,
+ u16 *divider)
+{
+ *divider = carrier_freq_to_clock_divider(freq);
+ cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider);
+ return clock_divider_to_carrier_freq(*divider);
+}
+
+static unsigned int rxclk_rx_s_carrier(struct i2c_client *c,
+ unsigned int freq,
+ u16 *divider)
+{
+ *divider = carrier_freq_to_clock_divider(freq);
+ cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider);
+ return clock_divider_to_carrier_freq(*divider);
+}
+
+static u32 txclk_tx_s_max_pulse_width(struct i2c_client *c, u32 ns,
+ u16 *divider)
+{
+ u64 pulse_clocks;
+
+ if (ns > IR_MAX_DURATION)
+ ns = IR_MAX_DURATION;
+ pulse_clocks = ns_to_pulse_clocks(ns);
+ *divider = pulse_clocks_to_clock_divider(pulse_clocks);
+ cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider);
+ return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+static u32 rxclk_rx_s_max_pulse_width(struct i2c_client *c, u32 ns,
+ u16 *divider)
+{
+ u64 pulse_clocks;
+
+ if (ns > IR_MAX_DURATION)
+ ns = IR_MAX_DURATION;
+ pulse_clocks = ns_to_pulse_clocks(ns);
+ *divider = pulse_clocks_to_clock_divider(pulse_clocks);
+ cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider);
+ return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+/*
+ * IR Tx Carrier Duty Cycle register helpers
+ */
+static unsigned int cduty_tx_s_duty_cycle(struct i2c_client *c,
+ unsigned int duty_cycle)
+{
+ u32 n;
+ n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */
+ if (n != 0)
+ n--;
+ if (n > 15)
+ n = 15;
+ cx25840_write4(c, CX25840_IR_CDUTY_REG, n);
+ return DIV_ROUND_CLOSEST((n + 1) * 100, 16);
+}
+
+/*
+ * IR Filter Register helpers
+ */
+static u32 filter_rx_s_min_width(struct i2c_client *c, u32 min_width_ns)
+{
+ u32 count = ns_to_lpf_count(min_width_ns);
+ cx25840_write4(c, CX25840_IR_FILTR_REG, count);
+ return lpf_count_to_ns(count);
+}
+
+/*
+ * IR IRQ Enable Register helpers
+ */
+static inline void irqenable_rx(struct v4l2_subdev *sd, u32 mask)
+{
+ struct cx25840_state *state = to_state(sd);
+
+ if (is_cx23885(state) || is_cx23887(state))
+ mask ^= IRQEN_MSK;
+ mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE);
+ cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG,
+ ~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask);
+}
+
+static inline void irqenable_tx(struct v4l2_subdev *sd, u32 mask)
+{
+ struct cx25840_state *state = to_state(sd);
+
+ if (is_cx23885(state) || is_cx23887(state))
+ mask ^= IRQEN_MSK;
+ mask &= IRQEN_TSE;
+ cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG, ~IRQEN_TSE, mask);
+}
+
+/*
+ * V4L2 Subdevice IR Ops
+ */
+int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c = NULL;
+ unsigned long flags;
+
+ union cx25840_ir_fifo_rec rx_data[FIFO_RX_DEPTH];
+ unsigned int i, j, k;
+ u32 events, v;
+ int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
+ u32 cntrl, irqen, stats;
+
+ *handled = false;
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ c = ir_state->c;
+
+ /* Only support the IR controller for the CX2388[57] AV Core for now */
+ if (!(is_cx23885(state) || is_cx23887(state)))
+ return -ENODEV;
+
+ cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG);
+ irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG);
+ if (is_cx23885(state) || is_cx23887(state))
+ irqen ^= IRQEN_MSK;
+ stats = cx25840_read4(c, CX25840_IR_STATS_REG);
+
+ tsr = stats & STATS_TSR; /* Tx FIFO Service Request */
+ rsr = stats & STATS_RSR; /* Rx FIFO Service Request */
+ rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */
+ ror = stats & STATS_ROR; /* Rx FIFO Over Run */
+
+ tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */
+ rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */
+ rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */
+ roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */
+
+ v4l2_dbg(2, ir_debug, sd, "IR IRQ Status: %s %s %s %s %s %s\n",
+ tsr ? "tsr" : " ", rsr ? "rsr" : " ",
+ rto ? "rto" : " ", ror ? "ror" : " ",
+ stats & STATS_TBY ? "tby" : " ",
+ stats & STATS_RBY ? "rby" : " ");
+
+ v4l2_dbg(2, ir_debug, sd, "IR IRQ Enables: %s %s %s %s\n",
+ tse ? "tse" : " ", rse ? "rse" : " ",
+ rte ? "rte" : " ", roe ? "roe" : " ");
+
+ /*
+ * Transmitter interrupt service
+ */
+ if (tse && tsr) {
+ /*
+ * TODO:
+ * Check the watermark threshold setting
+ * Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo
+ * Push the data to the hardware FIFO.
+ * If there was nothing more to send in the tx_kfifo, disable
+ * the TSR IRQ and notify the v4l2_device.
+ * If there was something in the tx_kfifo, check the tx_kfifo
+ * level and notify the v4l2_device, if it is low.
+ */
+ /* For now, inhibit TSR interrupt until Tx is implemented */
+ irqenable_tx(sd, 0);
+ events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ;
+ v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events);
+ *handled = true;
+ }
+
+ /*
+ * Receiver interrupt service
+ */
+ kror = 0;
+ if ((rse && rsr) || (rte && rto)) {
+ /*
+ * Receive data on RSR to clear the STATS_RSR.
+ * Receive data on RTO, since we may not have yet hit the RSR
+ * watermark when we receive the RTO.
+ */
+ for (i = 0, v = FIFO_RX_NDV;
+ (v & FIFO_RX_NDV) && !kror; i = 0) {
+ for (j = 0;
+ (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
+ v = cx25840_read4(c, CX25840_IR_FIFO_REG);
+ rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV;
+ i++;
+ }
+ if (i == 0)
+ break;
+ j = i * sizeof(union cx25840_ir_fifo_rec);
+ k = kfifo_in_locked(&ir_state->rx_kfifo,
+ (unsigned char *) rx_data, j,
+ &ir_state->rx_kfifo_lock);
+ if (k != j)
+ kror++; /* rx_kfifo over run */
+ }
+ *handled = true;
+ }
+
+ events = 0;
+ v = 0;
+ if (kror) {
+ events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN;
+ v4l2_err(sd, "IR receiver software FIFO overrun\n");
+ }
+ if (roe && ror) {
+ /*
+ * The RX FIFO Enable (CNTRL_RFE) must be toggled to clear
+ * the Rx FIFO Over Run status (STATS_ROR)
+ */
+ v |= CNTRL_RFE;
+ events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN;
+ v4l2_err(sd, "IR receiver hardware FIFO overrun\n");
+ }
+ if (rte && rto) {
+ /*
+ * The IR Receiver Enable (CNTRL_RXE) must be toggled to clear
+ * the Rx Pulse Width Timer Time Out (STATS_RTO)
+ */
+ v |= CNTRL_RXE;
+ events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
+ }
+ if (v) {
+ /* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */
+ cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl & ~v);
+ cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl);
+ *handled = true;
+ }
+ spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags);
+ if (kfifo_len(&ir_state->rx_kfifo) >= CX25840_IR_RX_KFIFO_SIZE / 2)
+ events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
+ spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags);
+
+ if (events)
+ v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events);
+ return 0;
+}
+
+/* Receiver */
+static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
+ ssize_t *num)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ bool invert;
+ u16 divider;
+ unsigned int i, n;
+ union cx25840_ir_fifo_rec *p;
+ unsigned u, v;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ invert = (bool) atomic_read(&ir_state->rx_invert);
+ divider = (u16) atomic_read(&ir_state->rxclk_divider);
+
+ n = count / sizeof(union cx25840_ir_fifo_rec)
+ * sizeof(union cx25840_ir_fifo_rec);
+ if (n == 0) {
+ *num = 0;
+ return 0;
+ }
+
+ n = kfifo_out_locked(&ir_state->rx_kfifo, buf, n,
+ &ir_state->rx_kfifo_lock);
+
+ n /= sizeof(union cx25840_ir_fifo_rec);
+ *num = n * sizeof(union cx25840_ir_fifo_rec);
+
+ for (p = (union cx25840_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) {
+
+ if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
+ /* Assume RTO was because of no IR light input */
+ u = 0;
+ v4l2_dbg(2, ir_debug, sd, "rx read: end of rx\n");
+ } else {
+ u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
+ if (invert)
+ u = u ? 0 : 1;
+ }
+
+ v = (unsigned) pulse_width_count_to_ns(
+ (u16) (p->hw_fifo_data & FIFO_RXTX), divider);
+ if (v > IR_MAX_DURATION)
+ v = IR_MAX_DURATION;
+
+ p->ir_core_data.pulse = u;
+ p->ir_core_data.duration = v;
+
+ v4l2_dbg(2, ir_debug, sd, "rx read: %10u ns %s\n",
+ v, u ? "mark" : "space");
+ }
+ return 0;
+}
+
+static int cx25840_ir_rx_g_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ mutex_lock(&ir_state->rx_params_lock);
+ memcpy(p, &ir_state->rx_params,
+ sizeof(struct v4l2_subdev_ir_parameters));
+ mutex_unlock(&ir_state->rx_params_lock);
+ return 0;
+}
+
+static int cx25840_ir_rx_shutdown(struct v4l2_subdev *sd)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ c = ir_state->c;
+ mutex_lock(&ir_state->rx_params_lock);
+
+ /* Disable or slow down all IR Rx circuits and counters */
+ irqenable_rx(sd, 0);
+ control_rx_enable(c, false);
+ control_rx_demodulation_enable(c, false);
+ control_rx_s_edge_detection(c, CNTRL_EDG_NONE);
+ filter_rx_s_min_width(c, 0);
+ cx25840_write4(c, CX25840_IR_RXCLK_REG, RXCLK_RCD);
+
+ ir_state->rx_params.shutdown = true;
+
+ mutex_unlock(&ir_state->rx_params_lock);
+ return 0;
+}
+
+static int cx25840_ir_rx_s_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c;
+ struct v4l2_subdev_ir_parameters *o;
+ u16 rxclk_divider;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ if (p->shutdown)
+ return cx25840_ir_rx_shutdown(sd);
+
+ if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+ return -ENOSYS;
+
+ c = ir_state->c;
+ o = &ir_state->rx_params;
+
+ mutex_lock(&ir_state->rx_params_lock);
+
+ o->shutdown = p->shutdown;
+
+ p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+ o->mode = p->mode;
+
+ p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec);
+ o->bytes_per_data_element = p->bytes_per_data_element;
+
+ /* Before we tweak the hardware, we have to disable the receiver */
+ irqenable_rx(sd, 0);
+ control_rx_enable(c, false);
+
+ control_rx_demodulation_enable(c, p->modulation);
+ o->modulation = p->modulation;
+
+ if (p->modulation) {
+ p->carrier_freq = rxclk_rx_s_carrier(c, p->carrier_freq,
+ &rxclk_divider);
+
+ o->carrier_freq = p->carrier_freq;
+
+ p->duty_cycle = 50;
+ o->duty_cycle = p->duty_cycle;
+
+ control_rx_s_carrier_window(c, p->carrier_freq,
+ &p->carrier_range_lower,
+ &p->carrier_range_upper);
+ o->carrier_range_lower = p->carrier_range_lower;
+ o->carrier_range_upper = p->carrier_range_upper;
+
+ p->max_pulse_width =
+ (u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider);
+ } else {
+ p->max_pulse_width =
+ rxclk_rx_s_max_pulse_width(c, p->max_pulse_width,
+ &rxclk_divider);
+ }
+ o->max_pulse_width = p->max_pulse_width;
+ atomic_set(&ir_state->rxclk_divider, rxclk_divider);
+
+ p->noise_filter_min_width =
+ filter_rx_s_min_width(c, p->noise_filter_min_width);
+ o->noise_filter_min_width = p->noise_filter_min_width;
+
+ p->resolution = clock_divider_to_resolution(rxclk_divider);
+ o->resolution = p->resolution;
+
+ /* FIXME - make this dependent on resolution for better performance */
+ control_rx_irq_watermark(c, RX_FIFO_HALF_FULL);
+
+ control_rx_s_edge_detection(c, CNTRL_EDG_BOTH);
+
+ o->invert_level = p->invert_level;
+ atomic_set(&ir_state->rx_invert, p->invert_level);
+
+ o->interrupt_enable = p->interrupt_enable;
+ o->enable = p->enable;
+ if (p->enable) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags);
+ kfifo_reset(&ir_state->rx_kfifo);
+ spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags);
+ if (p->interrupt_enable)
+ irqenable_rx(sd, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE);
+ control_rx_enable(c, p->enable);
+ }
+
+ mutex_unlock(&ir_state->rx_params_lock);
+ return 0;
+}
+
+/* Transmitter */
+static int cx25840_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count,
+ ssize_t *num)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ c = ir_state->c;
+#if 0
+ /*
+ * FIXME - the code below is an incomplete and untested sketch of what
+ * may need to be done. The critical part is to get 4 (or 8) pulses
+ * from the tx_kfifo, or converted from ns to the proper units from the
+ * input, and push them off to the hardware Tx FIFO right away, if the
+ * HW TX fifo needs service. The rest can be pushed to the tx_kfifo in
+ * a less critical timeframe. Also watch out for overruning the
+ * tx_kfifo - don't let it happen and let the caller know not all his
+ * pulses were written.
+ */
+ u32 *ns_pulse = (u32 *) buf;
+ unsigned int n;
+ u32 fifo_pulse[FIFO_TX_DEPTH];
+ u32 mark;
+
+ /* Compute how much we can fit in the tx kfifo */
+ n = CX25840_IR_TX_KFIFO_SIZE - kfifo_len(ir_state->tx_kfifo);
+ n = min(n, (unsigned int) count);
+ n /= sizeof(u32);
+
+ /* FIXME - turn on Tx Fifo service interrupt
+ * check hardware fifo level, and other stuff
+ */
+ for (i = 0; i < n; ) {
+ for (j = 0; j < FIFO_TX_DEPTH / 2 && i < n; j++) {
+ mark = ns_pulse[i] & LEVEL_MASK;
+ fifo_pulse[j] = ns_to_pulse_width_count(
+ ns_pulse[i] &
+ ~LEVEL_MASK,
+ ir_state->txclk_divider);
+ if (mark)
+ fifo_pulse[j] &= FIFO_RXTX_LVL;
+ i++;
+ }
+ kfifo_put(ir_state->tx_kfifo, (u8 *) fifo_pulse,
+ j * sizeof(u32));
+ }
+ *num = n * sizeof(u32);
+#else
+ /* For now enable the Tx FIFO Service interrupt & pretend we did work */
+ irqenable_tx(sd, IRQEN_TSE);
+ *num = count;
+#endif
+ return 0;
+}
+
+static int cx25840_ir_tx_g_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ mutex_lock(&ir_state->tx_params_lock);
+ memcpy(p, &ir_state->tx_params,
+ sizeof(struct v4l2_subdev_ir_parameters));
+ mutex_unlock(&ir_state->tx_params_lock);
+ return 0;
+}
+
+static int cx25840_ir_tx_shutdown(struct v4l2_subdev *sd)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ c = ir_state->c;
+ mutex_lock(&ir_state->tx_params_lock);
+
+ /* Disable or slow down all IR Tx circuits and counters */
+ irqenable_tx(sd, 0);
+ control_tx_enable(c, false);
+ control_tx_modulation_enable(c, false);
+ cx25840_write4(c, CX25840_IR_TXCLK_REG, TXCLK_TCD);
+
+ ir_state->tx_params.shutdown = true;
+
+ mutex_unlock(&ir_state->tx_params_lock);
+ return 0;
+}
+
+static int cx25840_ir_tx_s_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c;
+ struct v4l2_subdev_ir_parameters *o;
+ u16 txclk_divider;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ if (p->shutdown)
+ return cx25840_ir_tx_shutdown(sd);
+
+ if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+ return -ENOSYS;
+
+ c = ir_state->c;
+ o = &ir_state->tx_params;
+ mutex_lock(&ir_state->tx_params_lock);
+
+ o->shutdown = p->shutdown;
+
+ p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+ o->mode = p->mode;
+
+ p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec);
+ o->bytes_per_data_element = p->bytes_per_data_element;
+
+ /* Before we tweak the hardware, we have to disable the transmitter */
+ irqenable_tx(sd, 0);
+ control_tx_enable(c, false);
+
+ control_tx_modulation_enable(c, p->modulation);
+ o->modulation = p->modulation;
+
+ if (p->modulation) {
+ p->carrier_freq = txclk_tx_s_carrier(c, p->carrier_freq,
+ &txclk_divider);
+ o->carrier_freq = p->carrier_freq;
+
+ p->duty_cycle = cduty_tx_s_duty_cycle(c, p->duty_cycle);
+ o->duty_cycle = p->duty_cycle;
+
+ p->max_pulse_width =
+ (u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider);
+ } else {
+ p->max_pulse_width =
+ txclk_tx_s_max_pulse_width(c, p->max_pulse_width,
+ &txclk_divider);
+ }
+ o->max_pulse_width = p->max_pulse_width;
+ atomic_set(&ir_state->txclk_divider, txclk_divider);
+
+ p->resolution = clock_divider_to_resolution(txclk_divider);
+ o->resolution = p->resolution;
+
+ /* FIXME - make this dependent on resolution for better performance */
+ control_tx_irq_watermark(c, TX_FIFO_HALF_EMPTY);
+
+ control_tx_polarity_invert(c, p->invert_carrier_sense);
+ o->invert_carrier_sense = p->invert_carrier_sense;
+
+ /*
+ * FIXME: we don't have hardware help for IO pin level inversion
+ * here like we have on the CX23888.
+ * Act on this with some mix of logical inversion of data levels,
+ * carrier polarity, and carrier duty cycle.
+ */
+ o->invert_level = p->invert_level;
+
+ o->interrupt_enable = p->interrupt_enable;
+ o->enable = p->enable;
+ if (p->enable) {
+ /* reset tx_fifo here */
+ if (p->interrupt_enable)
+ irqenable_tx(sd, IRQEN_TSE);
+ control_tx_enable(c, p->enable);
+ }
+
+ mutex_unlock(&ir_state->tx_params_lock);
+ return 0;
+}
+
+
+/*
+ * V4L2 Subdevice Core Ops support
+ */
+int cx25840_ir_log_status(struct v4l2_subdev *sd)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct i2c_client *c = state->c;
+ char *s;
+ int i, j;
+ u32 cntrl, txclk, rxclk, cduty, stats, irqen, filtr;
+
+ /* The CX23888 chip doesn't have an IR controller on the A/V core */
+ if (is_cx23888(state))
+ return 0;
+
+ cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG);
+ txclk = cx25840_read4(c, CX25840_IR_TXCLK_REG) & TXCLK_TCD;
+ rxclk = cx25840_read4(c, CX25840_IR_RXCLK_REG) & RXCLK_RCD;
+ cduty = cx25840_read4(c, CX25840_IR_CDUTY_REG) & CDUTY_CDC;
+ stats = cx25840_read4(c, CX25840_IR_STATS_REG);
+ irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG);
+ if (is_cx23885(state) || is_cx23887(state))
+ irqen ^= IRQEN_MSK;
+ filtr = cx25840_read4(c, CX25840_IR_FILTR_REG) & FILTR_LPF;
+
+ v4l2_info(sd, "IR Receiver:\n");
+ v4l2_info(sd, "\tEnabled: %s\n",
+ cntrl & CNTRL_RXE ? "yes" : "no");
+ v4l2_info(sd, "\tDemodulation from a carrier: %s\n",
+ cntrl & CNTRL_DMD ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO: %s\n",
+ cntrl & CNTRL_RFE ? "enabled" : "disabled");
+ switch (cntrl & CNTRL_EDG) {
+ case CNTRL_EDG_NONE:
+ s = "disabled";
+ break;
+ case CNTRL_EDG_FALL:
+ s = "falling edge";
+ break;
+ case CNTRL_EDG_RISE:
+ s = "rising edge";
+ break;
+ case CNTRL_EDG_BOTH:
+ s = "rising & falling edges";
+ break;
+ default:
+ s = "??? edge";
+ break;
+ }
+ v4l2_info(sd, "\tPulse timers' start/stop trigger: %s\n", s);
+ v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n",
+ cntrl & CNTRL_R ? "not loaded" : "overflow marker");
+ v4l2_info(sd, "\tFIFO interrupt watermark: %s\n",
+ cntrl & CNTRL_RIC ? "not empty" : "half full or greater");
+ v4l2_info(sd, "\tLoopback mode: %s\n",
+ cntrl & CNTRL_LBM ? "loopback active" : "normal receive");
+ if (cntrl & CNTRL_DMD) {
+ v4l2_info(sd, "\tExpected carrier (16 clocks): %u Hz\n",
+ clock_divider_to_carrier_freq(rxclk));
+ switch (cntrl & CNTRL_WIN) {
+ case CNTRL_WIN_3_3:
+ i = 3;
+ j = 3;
+ break;
+ case CNTRL_WIN_4_3:
+ i = 4;
+ j = 3;
+ break;
+ case CNTRL_WIN_3_4:
+ i = 3;
+ j = 4;
+ break;
+ case CNTRL_WIN_4_4:
+ i = 4;
+ j = 4;
+ break;
+ default:
+ i = 0;
+ j = 0;
+ break;
+ }
+ v4l2_info(sd, "\tNext carrier edge window: 16 clocks "
+ "-%1d/+%1d, %u to %u Hz\n", i, j,
+ clock_divider_to_freq(rxclk, 16 + j),
+ clock_divider_to_freq(rxclk, 16 - i));
+ }
+ v4l2_info(sd, "\tMax measurable pulse width: %u us, %llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, rxclk),
+ pulse_width_count_to_ns(FIFO_RXTX, rxclk));
+ v4l2_info(sd, "\tLow pass filter: %s\n",
+ filtr ? "enabled" : "disabled");
+ if (filtr)
+ v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, "
+ "%u ns\n",
+ lpf_count_to_us(filtr),
+ lpf_count_to_ns(filtr));
+ v4l2_info(sd, "\tPulse width timer timed-out: %s\n",
+ stats & STATS_RTO ? "yes" : "no");
+ v4l2_info(sd, "\tPulse width timer time-out intr: %s\n",
+ irqen & IRQEN_RTE ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO overrun: %s\n",
+ stats & STATS_ROR ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO overrun interrupt: %s\n",
+ irqen & IRQEN_ROE ? "enabled" : "disabled");
+ v4l2_info(sd, "\tBusy: %s\n",
+ stats & STATS_RBY ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service requested: %s\n",
+ stats & STATS_RSR ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service request interrupt: %s\n",
+ irqen & IRQEN_RSE ? "enabled" : "disabled");
+
+ v4l2_info(sd, "IR Transmitter:\n");
+ v4l2_info(sd, "\tEnabled: %s\n",
+ cntrl & CNTRL_TXE ? "yes" : "no");
+ v4l2_info(sd, "\tModulation onto a carrier: %s\n",
+ cntrl & CNTRL_MOD ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO: %s\n",
+ cntrl & CNTRL_TFE ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO interrupt watermark: %s\n",
+ cntrl & CNTRL_TIC ? "not empty" : "half full or less");
+ v4l2_info(sd, "\tCarrier polarity: %s\n",
+ cntrl & CNTRL_CPL ? "space:burst mark:noburst"
+ : "space:noburst mark:burst");
+ if (cntrl & CNTRL_MOD) {
+ v4l2_info(sd, "\tCarrier (16 clocks): %u Hz\n",
+ clock_divider_to_carrier_freq(txclk));
+ v4l2_info(sd, "\tCarrier duty cycle: %2u/16\n",
+ cduty + 1);
+ }
+ v4l2_info(sd, "\tMax pulse width: %u us, %llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, txclk),
+ pulse_width_count_to_ns(FIFO_RXTX, txclk));
+ v4l2_info(sd, "\tBusy: %s\n",
+ stats & STATS_TBY ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service requested: %s\n",
+ stats & STATS_TSR ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service request interrupt: %s\n",
+ irqen & IRQEN_TSE ? "enabled" : "disabled");
+
+ return 0;
+}
+
+
+const struct v4l2_subdev_ir_ops cx25840_ir_ops = {
+ .rx_read = cx25840_ir_rx_read,
+ .rx_g_parameters = cx25840_ir_rx_g_parameters,
+ .rx_s_parameters = cx25840_ir_rx_s_parameters,
+
+ .tx_write = cx25840_ir_tx_write,
+ .tx_g_parameters = cx25840_ir_tx_g_parameters,
+ .tx_s_parameters = cx25840_ir_tx_s_parameters,
+};
+
+
+static const struct v4l2_subdev_ir_parameters default_rx_params = {
+ .bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec),
+ .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+ .enable = false,
+ .interrupt_enable = false,
+ .shutdown = true,
+
+ .modulation = true,
+ .carrier_freq = 36000, /* 36 kHz - RC-5, and RC-6 carrier */
+
+ /* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
+ /* RC-6: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
+ .noise_filter_min_width = 333333, /* ns */
+ .carrier_range_lower = 35000,
+ .carrier_range_upper = 37000,
+ .invert_level = false,
+};
+
+static const struct v4l2_subdev_ir_parameters default_tx_params = {
+ .bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec),
+ .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+ .enable = false,
+ .interrupt_enable = false,
+ .shutdown = true,
+
+ .modulation = true,
+ .carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
+ .duty_cycle = 25, /* 25 % - RC-5 carrier */
+ .invert_level = false,
+ .invert_carrier_sense = false,
+};
+
+int cx25840_ir_probe(struct v4l2_subdev *sd)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct cx25840_ir_state *ir_state;
+ struct v4l2_subdev_ir_parameters default_params;
+
+ /* Only init the IR controller for the CX2388[57] AV Core for now */
+ if (!(is_cx23885(state) || is_cx23887(state)))
+ return 0;
+
+ ir_state = kzalloc(sizeof(struct cx25840_ir_state), GFP_KERNEL);
+ if (ir_state == NULL)
+ return -ENOMEM;
+
+ spin_lock_init(&ir_state->rx_kfifo_lock);
+ if (kfifo_alloc(&ir_state->rx_kfifo,
+ CX25840_IR_RX_KFIFO_SIZE, GFP_KERNEL)) {
+ kfree(ir_state);
+ return -ENOMEM;
+ }
+
+ ir_state->c = state->c;
+ state->ir_state = ir_state;
+
+ /* Ensure no interrupts arrive yet */
+ if (is_cx23885(state) || is_cx23887(state))
+ cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, IRQEN_MSK);
+ else
+ cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, 0);
+
+ mutex_init(&ir_state->rx_params_lock);
+ memcpy(&default_params, &default_rx_params,
+ sizeof(struct v4l2_subdev_ir_parameters));
+ v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params);
+
+ mutex_init(&ir_state->tx_params_lock);
+ memcpy(&default_params, &default_tx_params,
+ sizeof(struct v4l2_subdev_ir_parameters));
+ v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params);
+
+ return 0;
+}
+
+int cx25840_ir_remove(struct v4l2_subdev *sd)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ cx25840_ir_rx_shutdown(sd);
+ cx25840_ir_tx_shutdown(sd);
+
+ kfifo_free(&ir_state->rx_kfifo);
+ kfree(ir_state);
+ state->ir_state = NULL;
+ return 0;
+}
select VIDEOBUF_DMA_SG
select VIDEO_TUNER
select VIDEO_TVEEPROM
- select VIDEO_IR
+ depends on VIDEO_IR
select VIDEO_WM8775 if VIDEO_HELPER_CHIPS_AUTO
---help---
This is a video4linux driver for Conexant 2388x based
0x18, 0x6b, 0x71,
I2C_CLIENT_END
};
- const unsigned short *addrp;
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
- /*
- * We can't call i2c_new_probed_device() because it uses
- * quick writes for probing and at least some R receiver
- * devices only reply to reads.
- */
- for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) {
- if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0,
- I2C_SMBUS_READ, 0,
- I2C_SMBUS_QUICK, NULL) >= 0) {
- info.addr = *addrp;
- i2c_new_device(&core->i2c_adap, &info);
- break;
- }
- }
+ /* Use quick read command for probe, some IR chips don't
+ * support writes */
+ i2c_new_probed_device(&core->i2c_adap, &info, addr_list,
+ i2c_probe_func_quick_read);
}
}
depends on VIDEO_DEV && I2C && INPUT
select VIDEO_TUNER
select VIDEO_TVEEPROM
- select VIDEO_IR
+ depends on VIDEO_IR
select VIDEOBUF_VMALLOC
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
if (dev->init_data.name)
info.platform_data = &dev->init_data;
- i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
+ i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL);
}
void em28xx_card_setup(struct em28xx *dev)
.current_norm = V4L2_STD_NTSC_M,
};
-static int __devinit viu_of_probe(struct of_device *op,
+static int __devinit viu_of_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct viu_dev *viu_dev;
return ret;
}
-static int __devexit viu_of_remove(struct of_device *op)
+static int __devexit viu_of_remove(struct platform_device *op)
{
struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev);
struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev);
}
#ifdef CONFIG_PM
-static int viu_suspend(struct of_device *op, pm_message_t state)
+static int viu_suspend(struct platform_device *op, pm_message_t state)
{
struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev);
struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev);
return 0;
}
-static int viu_resume(struct of_device *op)
+static int viu_resume(struct platform_device *op)
{
struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev);
struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev);
MODULE_DESCRIPTION("GSPCA USB Camera Driver");
MODULE_LICENSE("GPL");
-#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 9, 0)
+#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 10, 0)
#ifdef GSPCA_DEBUG
int gspca_debug = D_ERR | D_PROBE;
frame->v4l2_buf.sequence = ++gspca_dev->sequence;
gspca_dev->image = frame->data;
gspca_dev->image_len = 0;
- } else if (gspca_dev->last_packet_type == DISCARD_PACKET) {
- if (packet_type == LAST_PACKET)
- gspca_dev->last_packet_type = packet_type;
- return;
+ } else {
+ switch (gspca_dev->last_packet_type) {
+ case DISCARD_PACKET:
+ if (packet_type == LAST_PACKET)
+ gspca_dev->last_packet_type = packet_type;
+ return;
+ case LAST_PACKET:
+ return;
+ }
}
/* append the packet to the frame buffer */
gspca_dev->frsz);
packet_type = DISCARD_PACKET;
} else {
+/* !! image is NULL only when last pkt is LAST or DISCARD
+ if (gspca_dev->image == NULL) {
+ err("gspca_frame_add() image == NULL");
+ return;
+ }
+ */
memcpy(gspca_dev->image + gspca_dev->image_len,
data, len);
gspca_dev->image_len += len;
#define BRIDGE_SN9C110 2
#define BRIDGE_SN9C120 3
u8 sensor; /* Type of image sensor chip */
-enum {
+ u8 i2c_addr;
+
+ u8 jpeg_hdr[JPEG_HDR_SZ];
+};
+enum sensors {
SENSOR_ADCM1700,
SENSOR_GC0307,
SENSOR_HV7131R,
SENSOR_PO2030N,
SENSOR_SOI768,
SENSOR_SP80708,
-} sensors;
- u8 i2c_addr;
-
- u8 jpeg_hdr[JPEG_HDR_SZ];
};
/* V4L2 controls supported by the driver */
#define MODULE_NAME "sq930x"
#include "gspca.h"
-#include "jpeg.h"
MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>\n"
"Gerard Klaver <gerard at gkall dot hobby dot nl\n"
MODULE_DESCRIPTION("GSPCA/SQ930x USB Camera Driver");
MODULE_LICENSE("GPL");
-#define BULK_TRANSFER_LEN 5128
-
/* Structure to hold all of our device specific stuff */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
u16 expo;
u8 gain;
- u8 quality; /* webcam quality 0..3 */
-#define QUALITY_DEF 1
-
- u8 gpio[2];
-
- u8 eof_len;
u8 do_ctrl;
-
+ u8 gpio[2];
u8 sensor;
-enum {
+ u8 type;
+#define Generic 0
+#define Creative_live_motion 1
+};
+enum sensors {
SENSOR_ICX098BQ,
SENSOR_LZ24BP,
SENSOR_MI0360,
- SENSOR_MT9V111,
+ SENSOR_MT9V111, /* = MI360SOC */
SENSOR_OV7660,
SENSOR_OV9630,
-} sensors;
- u8 type;
-#define Generic 0
-#define Creative_live_motion 1
-
- u8 jpeg_hdr[JPEG_HDR_SZ];
};
static int sd_setexpo(struct gspca_dev *gspca_dev, __s32 val);
.minimum = 0x0001,
.maximum = 0x0fff,
.step = 1,
-#define EXPO_DEF 0x027d
+#define EXPO_DEF 0x0356
.default_value = EXPO_DEF,
},
.set = sd_setexpo,
.minimum = 0x01,
.maximum = 0xff,
.step = 1,
-#define GAIN_DEF 0x61
+#define GAIN_DEF 0x8d
.default_value = GAIN_DEF,
},
.set = sd_setgain,
};
static struct v4l2_pix_format vga_mode[] = {
- {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
- .bytesperline = 160,
- .sizeimage = 160 * 120 * 5 / 8 + 590,
- .colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 0},
- {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ {320, 240, V4L2_PIX_FMT_SRGGB8, V4L2_FIELD_NONE,
.bytesperline = 320,
- .sizeimage = 320 * 240 * 4 / 8 + 590,
- .colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 1},
- {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .sizeimage = 320 * 240,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+ {640, 480, V4L2_PIX_FMT_SRGGB8, V4L2_FIELD_NONE,
.bytesperline = 640,
- .sizeimage = 640 * 480 * 3 / 8 + 590,
- .colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 2},
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
};
-/* JPEG quality indexed by webcam quality */
-#define QUAL_0 90
-#define QUAL_1 85
-#define QUAL_2 75
-#define QUAL_3 70
-static const u8 quality_tb[4] = { QUAL_0, QUAL_1, QUAL_2, QUAL_3 };
-
/* sq930x registers */
#define SQ930_CTRL_UCBUS_IO 0x0001
#define SQ930_CTRL_I2C_IO 0x0002
{0x01, 0x0001}, /* select IFP/SOC registers */
{0x06, 0x300c}, /* operating mode control */
{0x08, 0xcc00}, /* output format control (RGB) */
- {0x01, 0x0004}, /* select core registers */
+ {0x01, 0x0004}, /* select sensor core registers */
};
static const struct i2c_write_cmd mt9v111_init_1[] = {
{0x03, 0x01e5}, /* window height */
{0x62, 0x0405},
};
static const struct i2c_write_cmd mt9v111_init_4[] = {
- {0x05, 0x00ce}, /* horizontal blanking */
+/* {0x05, 0x00ce}, */
+ {0x05, 0x005d}, /* horizontal blanking */
};
static const struct ucbus_write_cmd ov7660_start_0[] = {
{0xf334, 0x3e}, {0xf335, 0xf8}, {0xf33f, 0x03}
};
+/* start parameters indexed by [sensor][mode] */
static const struct cap_s {
u8 cc_sizeid;
u8 cc_bytes[32];
-} capconfig[4][3] = {
+} capconfig[4][2] = {
[SENSOR_ICX098BQ] = {
- {0, /* JPEG, 160x120 */
+ {2, /* Bayer 320x240 */
+ {0x05, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
+ 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+ {4, /* Bayer 640x480 */
{0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0x8b, 0x00, 0x8b, 0x00, 0x41, 0x01, 0x41,
- 0x01, 0x41, 0x01, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {2, /* JPEG, 320x240 */
- {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
- 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {4, /* JPEG, 640x480 */
- {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xf0,
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
- 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
},
[SENSOR_LZ24BP] = {
- {0, /* JPEG, 160x120 */
- {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0x8b, 0x00, 0x8b, 0x00, 0x41, 0x01, 0x41,
- 0x01, 0x41, 0x01, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {2, /* JPEG, 320x240 */
+ {2, /* Bayer 320x240 */
+ {0x05, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xee,
+ 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+ {4, /* Bayer 640x480 */
{0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xee,
0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
- 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {4, /* JPEG, 640x480 */
- {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xf0,
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
- 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
},
[SENSOR_MI0360] = {
- {0, /* JPEG, 160x120 */
- {0x05, 0x3d, 0x20, 0x0b, 0x00, 0xbd, 0x02, 0x0b,
- 0x02, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0x01, 0x01, 0x01, 0x01, 0x9f, 0x00, 0x9f,
- 0x00, 0x9f, 0x01, 0x05, 0xa0, 0x00, 0x80, 0x00} },
- {2, /* JPEG, 320x240 */
+ {2, /* Bayer 320x240 */
+ {0x05, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
+ 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+ {4, /* Bayer 640x480 */
{0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
-/*fixme 03 e3 */
0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
- 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {4, /* JPEG, 640x480 */
- {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe3,
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
- 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
},
[SENSOR_MT9V111] = {
- {0, /* JPEG, 160x120 */
- {0x05, 0x3d, 0x20, 0x0b, 0x00, 0xbd, 0x02, 0x0b,
- 0x02, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0x01, 0x01, 0x01, 0x01, 0x9f, 0x00, 0x9f,
- 0x00, 0x9f, 0x01, 0x05, 0xa0, 0x00, 0x80, 0x00} },
- {2, /* JPEG, 320x240 */
- {0x01, 0x02, 0x20, 0x03, 0x20, 0x82, 0x02, 0xe3,
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
- 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {4, /* JPEG, 640x480 */
- {0x01, 0x02, 0x20, 0x03, 0x20, 0x82, 0x02, 0xe3,
+ {2, /* Bayer 320x240 */
+ {0x05, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
+ 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+ {4, /* Bayer 640x480 */
+ {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
- 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
},
};
buf[i++] = 0x35; /* reg = global gain */
buf[i++] = 0x00; /* val H */
buf[i++] = sensor->i2c_dum;
- buf[i++] = sd->gain; /* val L */
+ buf[i++] = 0x80 + sd->gain / 2; /* val L */
buf[i++] = 0x00;
buf[i++] = 0x00;
buf[i++] = 0x00;
cam->nmodes = ARRAY_SIZE(vga_mode);
cam->bulk = 1;
- cam->bulk_size = BULK_TRANSFER_LEN;
-/* cam->bulk_nurbs = 2; fixme: if no setexpo sync */
- sd->quality = QUALITY_DEF;
sd->gain = GAIN_DEF;
sd->expo = EXPO_DEF;
if (sd->sensor == SENSOR_MI0360) {
/* no sensor probe for icam tracer */
- if (gspca_dev->usb_buf[5] == 0xf6) { /* if CMOS */
+ if (gspca_dev->usb_buf[5] == 0xf6) /* if CMOS */
sd->sensor = SENSOR_ICX098BQ;
- gspca_dev->cam.cam_mode = &vga_mode[1];
- gspca_dev->cam.nmodes = 1; /* only 320x240 */
- } else {
+ else
cmos_probe(gspca_dev);
- }
}
PDEBUG(D_PROBE, "Sensor %s", sensor_tb[sd->sensor].name);
return gspca_dev->usb_err;
}
-/* special function to create the quantization tables of the JPEG header */
-static void sd_jpeg_set_qual(u8 *jpeg_hdr,
- int quality)
-{
- int i, sc1, sc2;
-
- quality = quality_tb[quality]; /* convert to JPEG quality */
-/*
- * approximative qualities for Y and U/V:
- * quant = 0:94%/91% 1:91%/87% 2:82%/73% 3:69%/56%
- * should have:
- * quant = 0:94%/91% 1:91%/87.5% 2:81.5%/72% 3:69%/54.5%
- */
- sc1 = 200 - quality * 2;
- quality = quality * 7 / 5 - 40; /* UV quality */
- sc2 = 200 - quality * 2;
- for (i = 0; i < 64; i++) {
- jpeg_hdr[JPEG_QT0_OFFSET + i] =
- (jpeg_head[JPEG_QT0_OFFSET + i] * sc1 + 50) / 100;
- jpeg_hdr[JPEG_QT1_OFFSET + i] =
- (jpeg_head[JPEG_QT1_OFFSET + i] * sc2 + 50) / 100;
- }
-}
-
/* send the start/stop commands to the webcam */
static void send_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
const struct cap_s *cap;
- int mode, quality;
+ int mode;
mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
cap = &capconfig[sd->sensor][mode];
- quality = sd->quality;
- reg_wb(gspca_dev, (quality << 12)
- | 0x0a00 /* 900 for Bayer */
- | SQ930_CTRL_CAP_START,
- 0x0500 /* a00 for Bayer */
- | cap->cc_sizeid,
+ reg_wb(gspca_dev, 0x0900 | SQ930_CTRL_CAP_START,
+ 0x0a00 | cap->cc_sizeid,
cap->cc_bytes, 32);
-};
+}
+
static void send_stop(struct gspca_dev *gspca_dev)
{
reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0);
-};
+}
/* function called at start time before URB creation */
static int sd_isoc_init(struct gspca_dev *gspca_dev)
gspca_dev->cam.bulk_nurbs = 1; /* there must be one URB only */
sd->do_ctrl = 0;
+ gspca_dev->cam.bulk_size = gspca_dev->width * gspca_dev->height + 8;
return 0;
}
struct sd *sd = (struct sd *) gspca_dev;
int mode;
- /* initialize the JPEG header */
- jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
- 0x21); /* JPEG 422 */
- sd_jpeg_set_qual(sd->jpeg_hdr, sd->quality);
-
bridge_init(sd);
global_init(sd, 0);
msleep(100);
ARRAY_SIZE(lz24bp_start_2),
6);
mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
- lz24bp_ppl(sd, mode == 2 ? 0x0564 : 0x0310);
+ lz24bp_ppl(sd, mode == 1 ? 0x0564 : 0x0310);
msleep(10);
break;
case SENSOR_MI0360:
/* 1st start */
send_start(gspca_dev);
msleep(60);
- reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0x0000);
+ send_stop(gspca_dev);
i2c_write(sd,
mi0360_start_4, ARRAY_SIZE(mi0360_start_4));
ARRAY_SIZE(mt9v111_init_2));
ucbus_write(gspca_dev, mt9v111_start_1,
ARRAY_SIZE(mt9v111_start_1),
- 8);
+ 5);
i2c_write(sd, mt9v111_init_3,
ARRAY_SIZE(mt9v111_init_3));
i2c_write(sd, mt9v111_init_4,
out:
msleep(1000);
- sd->eof_len = 0; /* init packet scan */
-
if (sd->sensor == SENSOR_MT9V111)
gpio_set(sd, SQ930_GPIO_DFL_LED, SQ930_GPIO_DFL_LED);
msleep(100);
}
-/* move a packet adding 0x00 after 0xff */
-static void add_packet(struct gspca_dev *gspca_dev,
- u8 *data,
- int len)
-{
- int i;
-
- i = 0;
- do {
- if (data[i] == 0xff) {
- gspca_frame_add(gspca_dev, INTER_PACKET,
- data, i + 1);
- len -= i;
- data += i;
- *data = 0x00;
- i = 0;
- }
- } while (++i < len);
- gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
-}
-
-/* end a frame and start a new one */
-static void eof_sof(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- static const u8 ffd9[] = {0xff, 0xd9};
-
- /* if control set, stop bulk transfer */
- if (sd->do_ctrl
- && gspca_dev->last_packet_type == INTER_PACKET)
- gspca_dev->cam.bulk_nurbs = 0;
- gspca_frame_add(gspca_dev, LAST_PACKET,
- ffd9, 2);
- gspca_frame_add(gspca_dev, FIRST_PACKET,
- sd->jpeg_hdr, JPEG_HDR_SZ);
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
- u8 *p;
- int l;
-
- len -= 8; /* ignore last 8 bytes (00 00 55 aa 55 aa 00 00) */
-
- /*
- * the end/start of frame is indicated by
- * 0x00 * 16 - 0xab * 8
- * aligned on 8 bytes boundary
- */
- if (sd->eof_len != 0) { /* if 'abababab' in previous pkt */
- if (*((u32 *) data) == 0xabababab) {
- /*fixme: should remove previous 0000ababab*/
- eof_sof(gspca_dev);
- data += 4;
- len -= 4;
- }
- sd->eof_len = 0;
- }
- p = data;
- l = len;
- for (;;) {
- if (*((u32 *) p) == 0xabababab) {
- if (l < 8) { /* (may be 4 only) */
- sd->eof_len = 1;
- break;
- }
- if (*((u32 *) p + 1) == 0xabababab) {
- add_packet(gspca_dev, data, p - data - 16);
- /* remove previous zeros */
- eof_sof(gspca_dev);
- p += 8;
- l -= 8;
- if (l <= 0)
- return;
- len = l;
- data = p;
- continue;
- }
- }
- p += 4;
- l -= 4;
- if (l <= 0)
- break;
- }
- add_packet(gspca_dev, data, len);
+
+ if (sd->do_ctrl)
+ gspca_dev->cam.bulk_nurbs = 0;
+ gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len - 8);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
}
static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
return 0;
}
-static int sd_set_jcomp(struct gspca_dev *gspca_dev,
- struct v4l2_jpegcompression *jcomp)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- int quality;
-
- if (jcomp->quality >= (QUAL_0 + QUAL_1) / 2)
- quality = 0;
- else if (jcomp->quality >= (QUAL_1 + QUAL_2) / 2)
- quality = 1;
- else if (jcomp->quality >= (QUAL_2 + QUAL_3) / 2)
- quality = 2;
- else
- quality = 3;
-
- if (quality != sd->quality) {
- sd->quality = quality;
- if (gspca_dev->streaming) {
- send_stop(gspca_dev);
- sd_jpeg_set_qual(sd->jpeg_hdr, sd->quality);
- msleep(70);
- send_start(gspca_dev);
- }
- }
- return gspca_dev->usb_err;
-}
-
-static int sd_get_jcomp(struct gspca_dev *gspca_dev,
- struct v4l2_jpegcompression *jcomp)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- memset(jcomp, 0, sizeof *jcomp);
- jcomp->quality = quality_tb[sd->quality];
- jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT
- | V4L2_JPEG_MARKER_DQT;
- return 0;
-}
-
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.stopN = sd_stopN,
.pkt_scan = sd_pkt_scan,
.dq_callback = sd_dq_callback,
- .get_jcomp = sd_get_jcomp,
- .set_jcomp = sd_set_jcomp,
};
/* Table of supported USB devices */
u8 effect;
u8 sensor;
-enum {
+};
+enum sensors {
SENSOR_OM6802,
SENSOR_OTHER,
SENSOR_TAS5130A,
SENSOR_LT168G, /* must verify if this is the actual model */
-} sensors;
};
/* V4L2 controls supported by the driver */
u8 vflip;
u8 lightfreq;
s8 sharpness;
+ u16 exposure;
+ u8 gain;
+ u8 autogain;
+ u8 backlight;
u8 image_offset;
static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setbacklight(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getbacklight(struct gspca_dev *gspca_dev, __s32 *val);
static const struct ctrl sd_ctrls[] = {
#define BRIGHTNESS_IDX 0
.set = sd_setsharpness,
.get = sd_getsharpness,
},
+#define GAIN_IDX 7
+ {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+ .maximum = 78,
+ .step = 1,
+#define GAIN_DEF 0
+ .default_value = GAIN_DEF,
+ },
+ .set = sd_setgain,
+ .get = sd_getgain,
+ },
+#define EXPOSURE_IDX 8
+ {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+#define EXPOSURE_DEF 450
+ .minimum = 0,
+ .maximum = 4095,
+ .step = 1,
+ .default_value = EXPOSURE_DEF,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
+#define AUTOGAIN_IDX 9
+ {
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Automatic Gain and Exposure",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define AUTOGAIN_DEF 1
+ .default_value = AUTOGAIN_DEF,
+ },
+ .set = sd_setautogain,
+ .get = sd_getautogain,
+ },
+#define BACKLIGHT_IDX 10
+ {
+ {
+ .id = V4L2_CID_BACKLIGHT_COMPENSATION,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Backlight Compensation",
+ .minimum = 0,
+ .maximum = 15,
+ .step = 1,
+#define BACKLIGHT_DEF 15
+ .default_value = BACKLIGHT_DEF,
+ },
+ .set = sd_setbacklight,
+ .get = sd_getbacklight,
+ },
};
/* table of the disabled controls */
/* SENSOR_HV7131R 0 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
- | (1 << SHARPNESS_IDX),
+ | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_MI0360 1 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
- | (1 << SHARPNESS_IDX),
+ | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_MI1310_SOC 2 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_MI1320 3 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_MI1320_SOC 4 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_OV7660 5 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_OV7670 6 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << SHARPNESS_IDX),
+ | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_PO1200 7 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << LIGHTFREQ_IDX),
+ | (1 << LIGHTFREQ_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_PO3130NC 8 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
- | (1 << SHARPNESS_IDX),
+ | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_POxxxx 9 */
(1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX),
};
{0x00, 0x1e, 0xc6, 0xaa},
{0x00, 0x00, 0x40, 0xdd},
{0x00, 0x1d, 0x05, 0xaa},
-
+ {}
+};
+static const u8 poxxxx_gamma[][4] = {
{0x00, 0xd6, 0x22, 0xaa}, /* gamma 0 */
{0x00, 0x73, 0x00, 0xaa},
{0x00, 0x74, 0x0a, 0xaa},
{0x00, 0x7c, 0xba, 0xaa},
{0x00, 0x7d, 0xd4, 0xaa},
{0x00, 0x7e, 0xea, 0xaa},
-
- {0x00, 0xaa, 0xff, 0xaa}, /* back light comp */
- {0x00, 0xc4, 0x03, 0xaa},
- {0x00, 0xc5, 0x19, 0xaa},
- {0x00, 0xc6, 0x03, 0xaa},
- {0x00, 0xc7, 0x91, 0xaa},
- {0x00, 0xc8, 0x01, 0xaa},
- {0x00, 0xc9, 0xdd, 0xaa},
- {0x00, 0xca, 0x02, 0xaa},
- {0x00, 0xcb, 0x37, 0xaa},
-
-/* read d1 */
- {0x00, 0xd1, 0x3c, 0xaa},
+ {}
+};
+static const u8 poxxxx_init_start_3[][4] = {
{0x00, 0xb8, 0x28, 0xaa},
{0x00, 0xb9, 0x1e, 0xaa},
{0x00, 0xb6, 0x14, 0xaa},
{0x00, 0xb3, 0x08, 0xaa},
{0x00, 0xb4, 0x0b, 0xaa},
{0x00, 0xb5, 0x0d, 0xaa},
- {0x00, 0x59, 0x7e, 0xaa}, /* sharpness */
- {0x00, 0x16, 0x00, 0xaa}, /* white balance */
- {0x00, 0x18, 0x00, 0xaa},
{}
};
static const u8 poxxxx_init_end_2[][4] = {
/* this function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->bridge = id->driver_info >> 8;
+ sd->flags = id->driver_info & 0xff;
+
+ if (id->idVendor == 0x046d &&
+ (id->idProduct == 0x0892 || id->idProduct == 0x0896))
+ sd->sensor = SENSOR_POxxxx; /* no probe */
+
+ sd->brightness = BRIGHTNESS_DEF;
+ sd->contrast = CONTRAST_DEF;
+ sd->colors = COLOR_DEF;
+ sd->hflip = HFLIP_DEF;
+ sd->vflip = VFLIP_DEF;
+ sd->lightfreq = FREQ_DEF;
+ sd->sharpness = SHARPNESS_DEF;
+ sd->gain = GAIN_DEF;
+ sd->exposure = EXPOSURE_DEF;
+ sd->autogain = AUTOGAIN_DEF;
+ sd->backlight = BACKLIGHT_DEF;
+
+ return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
128, /* POxxxx 9 */
};
- cam = &gspca_dev->cam;
- sd->bridge = id->driver_info >> 8;
- sd->flags = id->driver_info & 0xff;
- if (id->idVendor == 0x046d &&
- (id->idProduct == 0x0892 || id->idProduct == 0x0896))
- sensor = SENSOR_POxxxx;
- else
+ if (sd->sensor != SENSOR_POxxxx)
sensor = vc032x_probe_sensor(gspca_dev);
+ else
+ sensor = sd->sensor;
+
switch (sensor) {
case -1:
PDEBUG(D_PROBE, "Unknown sensor...");
}
sd->sensor = sensor;
+ cam = &gspca_dev->cam;
if (sd->bridge == BRIDGE_VC0321) {
cam->cam_mode = vc0321_mode;
cam->nmodes = ARRAY_SIZE(vc0321_mode);
}
}
cam->npkt = npkt[sd->sensor];
-
- sd->brightness = BRIGHTNESS_DEF;
- sd->contrast = CONTRAST_DEF;
- sd->colors = COLOR_DEF;
- sd->hflip = HFLIP_DEF;
- sd->vflip = VFLIP_DEF;
- sd->lightfreq = FREQ_DEF;
- sd->sharpness = SHARPNESS_DEF;
-
gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
if (sd->sensor == SENSOR_OV7670)
sd->flags |= FL_HFLIP | FL_VFLIP;
- return 0;
-}
-
-/* this function is called at probe and resume time */
-static int sd_init(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
if (sd->bridge == BRIDGE_VC0321) {
reg_r(gspca_dev, 0x8a, 0, 3);
reg_w(gspca_dev, 0x87, 0x00, 0x0f0f);
if (gspca_dev->usb_buf[0] != 0) {
reg_w(gspca_dev, 0xa0, 0x26, 0xb300);
reg_w(gspca_dev, 0xa0, 0x04, 0xb300);
- reg_w(gspca_dev, 0xa0, 0x00, 0xb300);
}
+ reg_w(gspca_dev, 0xa0, 0x00, 0xb300);
}
}
return gspca_dev->usb_err;
break;
}
}
+static void setgain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (gspca_dev->ctrl_dis & (1 << GAIN_IDX))
+ return;
+ i2c_write(gspca_dev, 0x15, &sd->gain, 1);
+}
+
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 data;
+
+ if (gspca_dev->ctrl_dis & (1 << EXPOSURE_IDX))
+ return;
+ data = sd->exposure >> 8;
+ i2c_write(gspca_dev, 0x1a, &data, 1);
+ data = sd->exposure;
+ i2c_write(gspca_dev, 0x1b, &data, 1);
+}
+
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ static const u8 data[2] = {0x28, 0x3c};
+
+ if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
+ return;
+ i2c_write(gspca_dev, 0xd1, &data[sd->autogain], 1);
+}
+
+static void setgamma(struct gspca_dev *gspca_dev)
+{
+/*fixme:to do */
+ usb_exchange(gspca_dev, poxxxx_gamma);
+}
+
+static void setbacklight(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u16 v;
+ u8 data;
+
+ data = (sd->backlight << 4) | 0x0f;
+ i2c_write(gspca_dev, 0xaa, &data, 1);
+ v = 613 + 12 * sd->backlight;
+ data = v >> 8;
+ i2c_write(gspca_dev, 0xc4, &data, 1);
+ data = v;
+ i2c_write(gspca_dev, 0xc5, &data, 1);
+ v = 1093 - 12 * sd->backlight;
+ data = v >> 8;
+ i2c_write(gspca_dev, 0xc6, &data, 1);
+ data = v;
+ i2c_write(gspca_dev, 0xc7, &data, 1);
+ v = 342 + 9 * sd->backlight;
+ data = v >> 8;
+ i2c_write(gspca_dev, 0xc8, &data, 1);
+ data = v;
+ i2c_write(gspca_dev, 0xc9, &data, 1);
+ v = 702 - 9 * sd->backlight;
+ data = v >> 8;
+ i2c_write(gspca_dev, 0xca, &data, 1);
+ data = v;
+ i2c_write(gspca_dev, 0xcb, &data, 1);
+}
+
+static void setwb(struct gspca_dev *gspca_dev)
+{
+/*fixme:to do - valid when reg d1 = 0x1c - (reg16 + reg15 = 0xa3)*/
+ static const u8 data[2] = {0x00, 0x00};
+
+ i2c_write(gspca_dev, 0x16, &data[0], 1);
+ i2c_write(gspca_dev, 0x18, &data[1], 1);
+}
static int sd_start(struct gspca_dev *gspca_dev)
{
default:
/* case SENSOR_POxxxx: */
usb_exchange(gspca_dev, poxxxx_init_common);
+ setgamma(gspca_dev);
+ setbacklight(gspca_dev);
+ setbrightness(gspca_dev);
+ setcontrast(gspca_dev);
+ setcolors(gspca_dev);
+ setsharpness(gspca_dev);
+ setautogain(gspca_dev);
+ setexposure(gspca_dev);
+ setgain(gspca_dev);
+ usb_exchange(gspca_dev, poxxxx_init_start_3);
if (mode)
init = poxxxx_initQVGA;
else
break;
}
msleep(100);
- setsharpness(gspca_dev);
sethvflip(gspca_dev);
setlightfreq(gspca_dev);
}
reg_w(gspca_dev, 0xa0, 0x0000, 0xbfff);
break;
case SENSOR_POxxxx:
- setcolors(gspca_dev);
- setbrightness(gspca_dev);
- setcontrast(gspca_dev);
-
- /* led on */
- msleep(80);
- reg_w(gspca_dev, 0x89, 0xffff, 0xfdff);
usb_exchange(gspca_dev, poxxxx_init_end_2);
+ setwb(gspca_dev);
+ msleep(80); /* led on */
+ reg_w(gspca_dev, 0x89, 0xffff, 0xfdff);
break;
}
return gspca_dev->usb_err;
return 0;
}
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gain = val;
+ if (gspca_dev->streaming)
+ setgain(gspca_dev);
+ return gspca_dev->usb_err;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->gain;
+ return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->exposure = val;
+ if (gspca_dev->streaming)
+ setexposure(gspca_dev);
+ return gspca_dev->usb_err;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->exposure;
+ return 0;
+}
+
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->autogain = val;
+ if (gspca_dev->streaming)
+ setautogain(gspca_dev);
+
+ return gspca_dev->usb_err;
+}
+
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->autogain;
+ return 0;
+}
+
+static int sd_setbacklight(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->backlight = val;
+ if (gspca_dev->streaming)
+ setbacklight(gspca_dev);
+
+ return gspca_dev->usb_err;
+}
+
+static int sd_getbacklight(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->backlight;
+ return 0;
+}
+
static int sd_querymenu(struct gspca_dev *gspca_dev,
struct v4l2_querymenu *menu)
{
#define MODULE_NAME "zc3xx"
+#ifdef CONFIG_INPUT
#include <linux/input.h>
+#endif
#include "gspca.h"
#include "jpeg.h"
#define QUALITY_MAX 80
#define QUALITY_DEF 70
+ u8 bridge;
u8 sensor; /* Type of image sensor chip */
-/* !! values used in different tables */
-#define SENSOR_ADCM2700 0
-#define SENSOR_CS2102 1
-#define SENSOR_CS2102K 2
-#define SENSOR_GC0305 3
-#define SENSOR_HDCS2020b 4
-#define SENSOR_HV7131B 5
-#define SENSOR_HV7131C 6
-#define SENSOR_ICM105A 7
-#define SENSOR_MC501CB 8
-#define SENSOR_MI0360SOC 9
-#define SENSOR_OV7620 10
-/*#define SENSOR_OV7648 10 - same values */
-#define SENSOR_OV7630C 11
-#define SENSOR_PAS106 12
-#define SENSOR_PAS202B 13
-#define SENSOR_PB0330 14 /* (MI0360) */
-#define SENSOR_PO2030 15
-#define SENSOR_TAS5130CK 16
-#define SENSOR_TAS5130CXX 17
-#define SENSOR_TAS5130C_VF0250 18
-#define SENSOR_MAX 19
- unsigned short chip_revision;
+ u16 chip_revision;
u8 jpeg_hdr[JPEG_HDR_SZ];
};
+enum bridges {
+ BRIDGE_ZC301,
+ BRIDGE_ZC303,
+};
+enum sensors {
+ SENSOR_ADCM2700,
+ SENSOR_CS2102,
+ SENSOR_CS2102K,
+ SENSOR_GC0305,
+ SENSOR_HDCS2020b,
+ SENSOR_HV7131B,
+ SENSOR_HV7131R,
+ SENSOR_ICM105A,
+ SENSOR_MC501CB,
+ SENSOR_MT9V111_1, /* (mi360soc) zc301 */
+ SENSOR_MT9V111_3, /* (mi360soc) zc303 */
+ SENSOR_OV7620, /* OV7648 - same values */
+ SENSOR_OV7630C,
+ SENSOR_PAS106,
+ SENSOR_PAS202B,
+ SENSOR_PB0330,
+ SENSOR_PO2030,
+ SENSOR_TAS5130C,
+ SENSOR_TAS5130C_VF0250,
+ SENSOR_MAX
+};
/* V4L2 controls supported by the driver */
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
{}
};
+/* from lPEPI264v.inf (hv7131b!) */
static const struct usb_action hv7131r_InitialScale[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
{0xa0, 0x77, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
{0xa0, 0x88, ZC3XX_R09E_WINWIDTHLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xdd, 0x00, 0x0200},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xaa, 0x01, 0x000c},
{0xaa, 0x11, 0x0000},
{0xaa, 0x15, 0x00e8},
{0xaa, 0x16, 0x0002},
{0xaa, 0x17, 0x0088},
-
+ {0xaa, 0x30, 0x000b},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
- {0xa0, 0x89, ZC3XX_R18D_YTARGET},
+ {0xa0, 0x78, ZC3XX_R18D_YTARGET},
{0xa0, 0x50, ZC3XX_R1A8_DIGITALGAIN},
{0xa0, 0x00, 0x01ad},
{0xa0, 0xc0, 0x019b},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa1, 0x01, 0x0002},
- {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND},
- {0xa1, 0x01, 0x0091},
- {0xa1, 0x01, 0x0095},
- {0xa1, 0x01, 0x0096},
-
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* clock ? */
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
-
- {0xa0, 0x60, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf0, ZC3XX_R10B_RGB01},
- {0xa0, 0xf0, ZC3XX_R10C_RGB02},
- {0xa0, 0xf0, ZC3XX_R10D_RGB10},
- {0xa0, 0x60, ZC3XX_R10E_RGB11},
- {0xa0, 0xf0, ZC3XX_R10F_RGB12},
- {0xa0, 0xf0, ZC3XX_R110_RGB20},
- {0xa0, 0xf0, ZC3XX_R111_RGB21},
- {0xa0, 0x60, ZC3XX_R112_RGB22},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xaa, 0x25, 0x0007},
- {0xaa, 0x26, 0x0053},
- {0xaa, 0x27, 0x0000},
-
- {0xa0, 0x10, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 2f */
- {0xa0, 0x04, ZC3XX_R191_EXPOSURELIMITMID}, /* 9b */
- {0xa0, 0x60, ZC3XX_R192_EXPOSURELIMITLOW}, /* 80 */
- {0xa0, 0x01, ZC3XX_R195_ANTIFLICKERHIGH},
- {0xa0, 0xd4, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0xc0, ZC3XX_R197_ANTIFLICKERLOW},
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x13, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa1, 0x01, 0x001d},
- {0xa1, 0x01, 0x001e},
- {0xa1, 0x01, 0x001f},
- {0xa1, 0x01, 0x0020},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-
static const struct usb_action hv7131r_Initial[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
-
- {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT}, /* diff */
+ {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
{0xa0, 0x77, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
-
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
-
+ {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
- {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW}, /* 1e0 */
+ {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
{0xa0, 0x01, ZC3XX_R09B_WINHEIGHTHIGH},
- {0xa0, 0xe8, ZC3XX_R09C_WINHEIGHTLOW},
+ {0xa0, 0xe6, ZC3XX_R09C_WINHEIGHTLOW},
{0xa0, 0x02, ZC3XX_R09D_WINWIDTHHIGH},
- {0xa0, 0x88, ZC3XX_R09E_WINWIDTHLOW},
+ {0xa0, 0x86, ZC3XX_R09E_WINWIDTHLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xdd, 0x00, 0x0200},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xaa, 0x01, 0x000c},
{0xaa, 0x11, 0x0000},
{0xaa, 0x13, 0x0000},
{0xaa, 0x14, 0x0001},
- {0xaa, 0x15, 0x00e8},
+ {0xaa, 0x15, 0x00e6},
{0xaa, 0x16, 0x0002},
- {0xaa, 0x17, 0x0088},
-
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00 */
-
+ {0xaa, 0x17, 0x0086},
+ {0xaa, 0x30, 0x000b},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
- {0xa0, 0x89, ZC3XX_R18D_YTARGET},
+ {0xa0, 0x78, ZC3XX_R18D_YTARGET},
{0xa0, 0x50, ZC3XX_R1A8_DIGITALGAIN},
{0xa0, 0x00, 0x01ad},
{0xa0, 0xc0, 0x019b},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa1, 0x01, 0x0002},
- {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT},
- /* read the i2c chips ident */
- {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND},
- {0xa1, 0x01, 0x0091},
- {0xa1, 0x01, 0x0095},
- {0xa1, 0x01, 0x0096},
-
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* clock ? */
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
-
- {0xa0, 0x60, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf0, ZC3XX_R10B_RGB01},
- {0xa0, 0xf0, ZC3XX_R10C_RGB02},
- {0xa0, 0xf0, ZC3XX_R10D_RGB10},
- {0xa0, 0x60, ZC3XX_R10E_RGB11},
- {0xa0, 0xf0, ZC3XX_R10F_RGB12},
- {0xa0, 0xf0, ZC3XX_R110_RGB20},
- {0xa0, 0xf0, ZC3XX_R111_RGB21},
- {0xa0, 0x60, ZC3XX_R112_RGB22},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action hv7131r_50HZ[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xaa, 0x25, 0x0007},
- {0xaa, 0x26, 0x0053},
- {0xaa, 0x27, 0x0000},
-
- {0xa0, 0x10, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 2f */
- {0xa0, 0x04, ZC3XX_R191_EXPOSURELIMITMID}, /* 9b */
- {0xa0, 0x60, ZC3XX_R192_EXPOSURELIMITLOW}, /* 80 */
-
+ {0xa0, 0x06, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x68, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xa0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0xea, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x60, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action hv7131r_50HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xa0, 0x0c, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0xd1, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x40, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x01, ZC3XX_R195_ANTIFLICKERHIGH},
{0xa0, 0xd4, ZC3XX_R196_ANTIFLICKERMID},
{0xa0, 0xc0, ZC3XX_R197_ANTIFLICKERLOW},
-
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
{0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
{0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x13, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa1, 0x01, 0x001d},
- {0xa1, 0x01, 0x001e},
- {0xa1, 0x01, 0x001f},
- {0xa1, 0x01, 0x0020},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action hv7131r_60HZ[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xa0, 0x06, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x1a, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x80, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0xc3, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x50, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action hv7131r_60HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xa0, 0x0c, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x35, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x01, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x86, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0xa0, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action hv7131r_NoFliker[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xa0, 0x2f, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0xf8, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x02, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x58, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action hv7131r_NoFlikerScale[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xa0, 0x2f, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0xf8, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x04, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0xb0, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
{}
};
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
{0xa0, 0x01, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,01,cc */
/* {0xa0, 0x44, ZC3XX_R002_CLOCKSELECT}, * 00,02,44,cc
- - if mode1 (320x240) */
+ * if mode1 (320x240) */
/* ?? was
{0xa0, 0x00, 0x0039}, * 00,00,00,dd *
{0xa1, 0x01, 0x0037}, */
{0xa0, 0xf8, ZC3XX_R110_RGB20},
{0xa0, 0xf8, ZC3XX_R111_RGB21},
{0xa0, 0x50, ZC3XX_R112_RGB22},
-/* 0x03, */
{0xa1, 0x01, 0x0008},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* clock ? */
{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
{0xaa, 0x0e, 0x0002},
{0xaa, 0x14, 0x0081},
-/* Other registors */
+/* Other registers */
{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
/* Frame retreiving */
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
/* Sharpness */
{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
-/* Other registors */
+/* Other registers */
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
/* Auto exposure and white balance */
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
{0xaa, 0x0e, 0x0002},
{0xaa, 0x14, 0x0081},
-/* Other registors */
+/* Other registers */
{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
/* Frame retreiving */
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
/* Sharpness */
{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
-/* Other registors */
+/* Other registers */
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
/* Auto exposure and white balance */
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
{}
};
-/* mi0360soc and pb0330 from vm30x.inf for 0ac8:301b and 0ac8:303b 07/02/13 */
-static const struct usb_action mi0360soc_Initial[] = { /* 640x480 */
+/* mt9v111 (mi0360soc) and pb0330 from vm30x.inf 0ac8:301b 07/02/13 */
+static const struct usb_action mt9v111_1_Initial[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC}, /*jfm: was 03*/
-/* {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, */
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xdd, 0x00, 0x0200},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xaa, 0x01, 0x0001},
{0xaa, 0x06, 0x0000},
{0xaa, 0x08, 0x0483},
{0xaa, 0x03, 0x01e5}, /*jfm: was 01e7*/
{0xaa, 0x04, 0x0285}, /*jfm: was 0287*/
{0xaa, 0x07, 0x3002},
- {0xaa, 0x20, 0x5100}, /*jfm: was 1100*/
- {0xaa, 0x35, 0x507f}, /*jfm: was 0050*/
+ {0xaa, 0x20, 0x5100},
+ {0xaa, 0x35, 0x507f},
{0xaa, 0x30, 0x0005},
{0xaa, 0x31, 0x0000},
{0xaa, 0x58, 0x0078},
{0xaa, 0x62, 0x0411},
- {0xaa, 0x2b, 0x0028},
+ {0xaa, 0x2b, 0x007f},
{0xaa, 0x2c, 0x007f}, /*jfm: was 0030*/
{0xaa, 0x2d, 0x007f}, /*jfm: was 0030*/
{0xaa, 0x2e, 0x007f}, /*jfm: was 0030*/
{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
- {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION}, /*jfm: was 37*/
+ {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x6c, ZC3XX_R18D_YTARGET}, /* jfm: was 78 */
+ {0xa0, 0x6c, ZC3XX_R18D_YTARGET},
{0xa0, 0x61, ZC3XX_R116_RGAIN},
{0xa0, 0x65, ZC3XX_R118_BGAIN},
{}
};
-static const struct usb_action mi0360soc_InitialScale[] = { /* 320x240 */
+static const struct usb_action mt9v111_1_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC}, /*jfm: was 03*/
-/* {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, */
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xdd, 0x00, 0x0200},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xaa, 0x01, 0x0001},
{0xaa, 0x06, 0x0000},
{0xaa, 0x08, 0x0483},
{0xaa, 0x03, 0x01e7},
{0xaa, 0x04, 0x0287},
{0xaa, 0x07, 0x3002},
- {0xaa, 0x20, 0x5100}, /*jfm: was 1100*/
+ {0xaa, 0x20, 0x5100},
{0xaa, 0x35, 0x007f}, /*jfm: was 0050*/
{0xaa, 0x30, 0x0005},
{0xaa, 0x31, 0x0000},
{0xaa, 0x2d, 0x007f}, /*jfm: was 30*/
{0xaa, 0x2e, 0x007f}, /*jfm: was 28*/
{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
- {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION}, /*jfm: was 37*/
+ {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x6c, ZC3XX_R18D_YTARGET}, /*jfm: was 78*/
+ {0xa0, 0x6c, ZC3XX_R18D_YTARGET},
{0xa0, 0x61, ZC3XX_R116_RGAIN},
{0xa0, 0x65, ZC3XX_R118_BGAIN},
{}
};
-static const struct usb_action mi360soc_AE50HZ[] = {
+static const struct usb_action mt9v111_1_AE50HZ[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xbb, 0x00, 0x0562},
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action mi360soc_AE50HZScale[] = {
+static const struct usb_action mt9v111_1_AE50HZScale[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xbb, 0x00, 0x0509},
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action mi360soc_AE60HZ[] = {
+static const struct usb_action mt9v111_1_AE60HZ[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xbb, 0x00, 0x053d},
- {0xbb, 0x01, 0x096e},
+ {0xaa, 0x05, 0x003d},
+ {0xaa, 0x09, 0x016e},
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
{0xa0, 0xdd, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action mi360soc_AE60HZScale[] = {
+static const struct usb_action mt9v111_1_AE60HZScale[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xbb, 0x00, 0x0509},
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action mi360soc_AENoFliker[] = {
+static const struct usb_action mt9v111_1_AENoFliker[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xbb, 0x00, 0x0509},
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action mi360soc_AENoFlikerScale[] = {
+static const struct usb_action mt9v111_1_AENoFlikerScale[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xbb, 0x00, 0x0534},
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-
-static const struct usb_action pb0330_Initial[] = { /* 640x480 */
+/* from usbvm303.inf 0ac8:303b 07/03/25 (3 - tas5130c) */
+static const struct usb_action mt9v111_3_Initial[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* 00 */
+ {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
- {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
+ {0xa0, 0x04, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+ {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xdd, 0x00, 0x0200},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xaa, 0x01, 0x0006},
- {0xaa, 0x02, 0x0011},
- {0xaa, 0x03, 0x01e5}, /*jfm: was 1e7*/
- {0xaa, 0x04, 0x0285}, /*jfm: was 0287*/
- {0xaa, 0x06, 0x0003},
- {0xaa, 0x07, 0x3002},
- {0xaa, 0x20, 0x1100},
- {0xaa, 0x2f, 0xf7b0},
+ {0xaa, 0x01, 0x0001}, /* select IFP/SOC registers */
+ {0xaa, 0x06, 0x0000}, /* operating mode control */
+ {0xaa, 0x08, 0x0483}, /* output format control */
+ /* H red first, V red or blue first,
+ * raw Bayer, auto flicker */
+ {0xaa, 0x01, 0x0004}, /* select sensor core registers */
+ {0xaa, 0x08, 0x0006}, /* row start */
+ {0xaa, 0x02, 0x0011}, /* column start */
+ {0xaa, 0x03, 0x01e5}, /* window height - 1 */
+ {0xaa, 0x04, 0x0285}, /* window width - 1 */
+ {0xaa, 0x07, 0x3002}, /* output control */
+ {0xaa, 0x20, 0x1100}, /* read mode: bits 8 & 12 (?) */
+ {0xaa, 0x35, 0x007f}, /* global gain */
{0xaa, 0x30, 0x0005},
{0xaa, 0x31, 0x0000},
- {0xaa, 0x34, 0x0100},
- {0xaa, 0x35, 0x0060},
- {0xaa, 0x3d, 0x068f},
- {0xaa, 0x40, 0x01e0},
{0xaa, 0x58, 0x0078},
{0xaa, 0x62, 0x0411},
+ {0xaa, 0x2b, 0x007f}, /* green1 gain */
+ {0xaa, 0x2c, 0x007f}, /* blue gain */
+ {0xaa, 0x2d, 0x007f}, /* red gain */
+ {0xaa, 0x2e, 0x007f}, /* green2 gain */
{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x09, 0x01ad}, /*jfm: was 00 */
- {0xa0, 0x15, 0x01ae},
+ {0xa0, 0x00, 0x01ad},
{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x78, ZC3XX_R18D_YTARGET}, /*jfm: was 6c*/
+ {0xa0, 0x80, ZC3XX_R18D_YTARGET},
+ {0xa0, 0x61, ZC3XX_R116_RGAIN},
+ {0xa0, 0x65, ZC3XX_R118_BGAIN},
{}
};
-static const struct usb_action pb0330_InitialScale[] = { /* 320x240 */
+static const struct usb_action mt9v111_3_InitialScale[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* 00 */
+ {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+ {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xdd, 0x00, 0x0200},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xaa, 0x01, 0x0006},
+ {0xaa, 0x01, 0x0001},
+ {0xaa, 0x06, 0x0000},
+ {0xaa, 0x08, 0x0483},
+ {0xaa, 0x01, 0x0004},
+ {0xaa, 0x08, 0x0006},
{0xaa, 0x02, 0x0011},
{0xaa, 0x03, 0x01e7},
{0xaa, 0x04, 0x0287},
- {0xaa, 0x06, 0x0003},
{0xaa, 0x07, 0x3002},
{0xaa, 0x20, 0x1100},
- {0xaa, 0x2f, 0xf7b0},
+ {0xaa, 0x35, 0x007f},
{0xaa, 0x30, 0x0005},
{0xaa, 0x31, 0x0000},
- {0xaa, 0x34, 0x0100},
- {0xaa, 0x35, 0x0060},
- {0xaa, 0x3d, 0x068f},
- {0xaa, 0x40, 0x01e0},
{0xaa, 0x58, 0x0078},
{0xaa, 0x62, 0x0411},
+ {0xaa, 0x2b, 0x007f},
+ {0xaa, 0x2c, 0x007f},
+ {0xaa, 0x2d, 0x007f},
+ {0xaa, 0x2e, 0x007f},
{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
+ {0xa0, 0x00, 0x01ad},
{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x78, ZC3XX_R18D_YTARGET}, /*jfm: was 6c*/
+ {0xa0, 0x80, ZC3XX_R18D_YTARGET},
+ {0xa0, 0x61, ZC3XX_R116_RGAIN},
+ {0xa0, 0x65, ZC3XX_R118_BGAIN},
{}
};
-static const struct usb_action pb0330_50HZ[] = {
+static const struct usb_action mt9v111_3_AE50HZ[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xbb, 0x00, 0x055c},
- {0xbb, 0x01, 0x09aa},
- {0xbb, 0x00, 0x1001},
- {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xaa, 0x05, 0x0009}, /* horizontal blanking */
+ {0xaa, 0x09, 0x01ce}, /* shutter width */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0xc4, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0xd2, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x47, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x9a, ZC3XX_R197_ANTIFLICKERLOW},
{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa0, 0x5c, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0x90, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xc8, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action pb0330_50HZScale[] = {
+static const struct usb_action mt9v111_3_AE50HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xbb, 0x00, 0x0566},
- {0xbb, 0x02, 0x09b2},
- {0xbb, 0x00, 0x1002},
- {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xaa, 0x05, 0x0009},
+ {0xaa, 0x09, 0x01ce},
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0x8c, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0xd2, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x8a, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x9a, ZC3XX_R197_ANTIFLICKERLOW},
{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
{0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0xf0, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xf8, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action pb0330_60HZ[] = {
+static const struct usb_action mt9v111_3_AE60HZ[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xbb, 0x00, 0x0535},
- {0xbb, 0x01, 0x0974},
- {0xbb, 0x00, 0x1001},
- {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xaa, 0x05, 0x0009},
+ {0xaa, 0x09, 0x0083},
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0xfe, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x8f, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x3e, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x81, ZC3XX_R197_ANTIFLICKERLOW},
{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa0, 0x35, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0x50, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
- {0xa0, 0xd0, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action pb0330_60HZScale[] = {
+static const struct usb_action mt9v111_3_AE60HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xbb, 0x00, 0x0535},
- {0xbb, 0x02, 0x096c},
- {0xbb, 0x00, 0x1002},
- {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xaa, 0x05, 0x0009},
+ {0xaa, 0x09, 0x0083},
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0xc0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x8f, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x81, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action mt9v111_3_AENoFliker[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x05, 0x0034},
+ {0xaa, 0x09, 0x0260},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x04, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x34, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x60, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xe0, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action mt9v111_3_AENoFlikerScale[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x05, 0x0034},
+ {0xaa, 0x09, 0x0260},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x04, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x34, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x60, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xe0, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+
+static const struct usb_action pb0330_Initial[] = { /* 640x480 */
+ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
+ {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* 00 */
+ {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
+ {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
+ {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
+ {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
+ {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
+ {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+ {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+ {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xdd, 0x00, 0x0200},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xaa, 0x01, 0x0006},
+ {0xaa, 0x02, 0x0011},
+ {0xaa, 0x03, 0x01e5}, /*jfm: was 1e7*/
+ {0xaa, 0x04, 0x0285}, /*jfm: was 0287*/
+ {0xaa, 0x06, 0x0003},
+ {0xaa, 0x07, 0x3002},
+ {0xaa, 0x20, 0x1100},
+ {0xaa, 0x2f, 0xf7b0},
+ {0xaa, 0x30, 0x0005},
+ {0xaa, 0x31, 0x0000},
+ {0xaa, 0x34, 0x0100},
+ {0xaa, 0x35, 0x0060},
+ {0xaa, 0x3d, 0x068f},
+ {0xaa, 0x40, 0x01e0},
+ {0xaa, 0x58, 0x0078},
+ {0xaa, 0x62, 0x0411},
+ {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
+ {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
+ {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
+ {0xa0, 0x09, 0x01ad}, /*jfm: was 00 */
+ {0xa0, 0x15, 0x01ae},
+ {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+ {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
+ {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
+ {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
+ {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
+ {0xa0, 0x78, ZC3XX_R18D_YTARGET}, /*jfm: was 6c*/
+ {}
+};
+static const struct usb_action pb0330_InitialScale[] = { /* 320x240 */
+ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
+ {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* 00 */
+ {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
+ {0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
+ {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
+ {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
+ {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
+ {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+ {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+ {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xdd, 0x00, 0x0200},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xaa, 0x01, 0x0006},
+ {0xaa, 0x02, 0x0011},
+ {0xaa, 0x03, 0x01e7},
+ {0xaa, 0x04, 0x0287},
+ {0xaa, 0x06, 0x0003},
+ {0xaa, 0x07, 0x3002},
+ {0xaa, 0x20, 0x1100},
+ {0xaa, 0x2f, 0xf7b0},
+ {0xaa, 0x30, 0x0005},
+ {0xaa, 0x31, 0x0000},
+ {0xaa, 0x34, 0x0100},
+ {0xaa, 0x35, 0x0060},
+ {0xaa, 0x3d, 0x068f},
+ {0xaa, 0x40, 0x01e0},
+ {0xaa, 0x58, 0x0078},
+ {0xaa, 0x62, 0x0411},
+ {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
+ {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
+ {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
+ {0xa0, 0x09, 0x01ad},
+ {0xa0, 0x15, 0x01ae},
+ {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+ {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
+ {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
+ {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
+ {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
+ {0xa0, 0x78, ZC3XX_R18D_YTARGET}, /*jfm: was 6c*/
+ {}
+};
+static const struct usb_action pb0330_50HZ[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x055c},
+ {0xbb, 0x01, 0x09aa},
+ {0xbb, 0x00, 0x1001},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xc4, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x47, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x5c, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x90, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xc8, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action pb0330_50HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0566},
+ {0xbb, 0x02, 0x09b2},
+ {0xbb, 0x00, 0x1002},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x8c, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x8a, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xf0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf8, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action pb0330_60HZ[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0535},
+ {0xbb, 0x01, 0x0974},
+ {0xbb, 0x00, 0x1001},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xfe, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x3e, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x35, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x50, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xd0, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action pb0330_60HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0535},
+ {0xbb, 0x02, 0x096c},
+ {0xbb, 0x00, 0x1002},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xc0, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
{0xa0, 0x7c, ZC3XX_R197_ANTIFLICKERLOW},
{0xaa, 0x58, 0x0002}, /* 00,58,02,aa */
{0xaa, 0x66, 0x00c0}, /* 00,66,c0,aa */
{0xaa, 0x67, 0x0044}, /* 00,67,44,aa */
- {0xaa, 0x6b, 0x00a0}, /* 00,6b,a0,aa */
- {0xaa, 0x6c, 0x0054}, /* 00,6c,54,aa */
- {0xaa, 0xd6, 0x0007}, /* 00,d6,07,aa */
- {0xa0, 0xf7, ZC3XX_R101_SENSORCORRECTION}, /* 01,01,f7,cc */
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC}, /* 00,12,05,cc */
- {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE}, /* 01,00,0d,cc */
- {0xa0, 0x06, ZC3XX_R189_AWBSTATUS}, /* 01,89,06,cc */
- {0xa0, 0x00, 0x01ad}, /* 01,ad,00,cc */
- {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE}, /* 01,c5,03,cc */
- {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05}, /* 01,cb,13,cc */
- {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* 02,50,08,cc */
- {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS}, /* 03,01,08,cc */
- {0xa0, 0x7a, ZC3XX_R116_RGAIN}, /* 01,16,7a,cc */
- {0xa0, 0x4a, ZC3XX_R118_BGAIN}, /* 01,18,4a,cc */
- {}
-};
-
-static const struct usb_action po2030_50HZ[] = {
- {0xaa, 0x8d, 0x0008}, /* 00,8d,08,aa */
- {0xaa, 0x1a, 0x0001}, /* 00,1a,01,aa */
- {0xaa, 0x1b, 0x000a}, /* 00,1b,0a,aa */
- {0xaa, 0x1c, 0x00b0}, /* 00,1c,b0,aa */
- {0xa0, 0x05, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,05,cc */
- {0xa0, 0x35, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,35,cc */
- {0xa0, 0x70, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,70,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x85, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,85,cc */
- {0xa0, 0x58, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,58,cc */
- {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE}, /* 01,8c,0c,cc */
- {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,18,cc */
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,60,cc */
- {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
- {0xa0, 0x22, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,22,cc */
- {0xa0, 0x88, ZC3XX_R18D_YTARGET}, /* 01,8d,88,cc */
- {0xa0, 0x58, ZC3XX_R11D_GLOBALGAIN}, /* 01,1d,58,cc */
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE}, /* 01,80,42,cc */
- {}
-};
-
-static const struct usb_action po2030_60HZ[] = {
- {0xaa, 0x8d, 0x0008}, /* 00,8d,08,aa */
- {0xaa, 0x1a, 0x0000}, /* 00,1a,00,aa */
- {0xaa, 0x1b, 0x00de}, /* 00,1b,de,aa */
- {0xaa, 0x1c, 0x0040}, /* 00,1c,40,aa */
- {0xa0, 0x08, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,08,cc */
- {0xa0, 0xae, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,ae,cc */
- {0xa0, 0x80, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,80,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x6f, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,6f,cc */
- {0xa0, 0x20, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,20,cc */
- {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE}, /* 01,8c,0c,cc */
- {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,18,cc */
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,60,cc */
- {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
- {0xa0, 0x22, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,22,cc */
- {0xa0, 0x88, ZC3XX_R18D_YTARGET}, /* 01,8d,88,cc */
- /* win: 01,8d,80 */
- {0xa0, 0x58, ZC3XX_R11D_GLOBALGAIN}, /* 01,1d,58,cc */
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE}, /* 01,80,42,cc */
- {}
-};
-
-static const struct usb_action po2030_NoFliker[] = {
- {0xa0, 0x02, ZC3XX_R180_AUTOCORRECTENABLE}, /* 01,80,02,cc */
- {0xaa, 0x8d, 0x000d}, /* 00,8d,0d,aa */
- {0xaa, 0x1a, 0x0000}, /* 00,1a,00,aa */
- {0xaa, 0x1b, 0x0002}, /* 00,1b,02,aa */
- {0xaa, 0x1c, 0x0078}, /* 00,1c,78,aa */
- {0xaa, 0x46, 0x0000}, /* 00,46,00,aa */
- {0xaa, 0x15, 0x0000}, /* 00,15,00,aa */
- {}
-};
-
-/* TEST */
-static const struct usb_action tas5130cK_InitialScale[] = {
- {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x01, 0x003b},
- {0xa0, 0x0e, 0x003a},
- {0xa0, 0x01, 0x0038},
- {0xa0, 0x0b, 0x0039},
- {0xa0, 0x00, 0x0038},
- {0xa0, 0x0b, 0x0039},
- {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
- {0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
- {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
- {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
- {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
- {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
- {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
- {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
- {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
- {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
- {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
- {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x01, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x06, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x83, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x04, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x06, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x02, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x03, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0xE7, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x04, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x87, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x02, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x07, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x02, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x30, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x20, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x51, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x35, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7F, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x30, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x05, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x31, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x58, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x78, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x62, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2B, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2c, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2D, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2e, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
- {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
- {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
- {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
- {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
- {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x6c, ZC3XX_R18D_YTARGET},
- {0xa0, 0x61, ZC3XX_R116_RGAIN},
- {0xa0, 0x65, ZC3XX_R118_BGAIN},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x4c, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf1, ZC3XX_R10B_RGB01},
- {0xa0, 0x03, ZC3XX_R10C_RGB02},
- {0xa0, 0xfe, ZC3XX_R10D_RGB10},
- {0xa0, 0x51, ZC3XX_R10E_RGB11},
- {0xa0, 0xf1, ZC3XX_R10F_RGB12},
- {0xa0, 0xec, ZC3XX_R110_RGB20},
- {0xa0, 0x03, ZC3XX_R111_RGB21},
- {0xa0, 0x51, ZC3XX_R112_RGB22},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
- {0xa0, 0x38, ZC3XX_R120_GAMMA00}, /* gamma > 5 */
- {0xa0, 0x51, ZC3XX_R121_GAMMA01},
- {0xa0, 0x6e, ZC3XX_R122_GAMMA02},
- {0xa0, 0x8c, ZC3XX_R123_GAMMA03},
- {0xa0, 0xa2, ZC3XX_R124_GAMMA04},
- {0xa0, 0xb6, ZC3XX_R125_GAMMA05},
- {0xa0, 0xc8, ZC3XX_R126_GAMMA06},
- {0xa0, 0xd6, ZC3XX_R127_GAMMA07},
- {0xa0, 0xe2, ZC3XX_R128_GAMMA08},
- {0xa0, 0xed, ZC3XX_R129_GAMMA09},
- {0xa0, 0xf5, ZC3XX_R12A_GAMMA0A},
- {0xa0, 0xfc, ZC3XX_R12B_GAMMA0B},
- {0xa0, 0xff, ZC3XX_R12C_GAMMA0C},
- {0xa0, 0xff, ZC3XX_R12D_GAMMA0D},
- {0xa0, 0xff, ZC3XX_R12E_GAMMA0E},
- {0xa0, 0xff, ZC3XX_R12F_GAMMA0F},
- {0xa0, 0x12, ZC3XX_R130_GAMMA10},
- {0xa0, 0x1b, ZC3XX_R131_GAMMA11},
- {0xa0, 0x1d, ZC3XX_R132_GAMMA12},
- {0xa0, 0x1a, ZC3XX_R133_GAMMA13},
- {0xa0, 0x15, ZC3XX_R134_GAMMA14},
- {0xa0, 0x12, ZC3XX_R135_GAMMA15},
- {0xa0, 0x0f, ZC3XX_R136_GAMMA16},
- {0xa0, 0x0d, ZC3XX_R137_GAMMA17},
- {0xa0, 0x0b, ZC3XX_R138_GAMMA18},
- {0xa0, 0x09, ZC3XX_R139_GAMMA19},
- {0xa0, 0x07, ZC3XX_R13A_GAMMA1A},
- {0xa0, 0x05, ZC3XX_R13B_GAMMA1B},
- {0xa0, 0x00, ZC3XX_R13C_GAMMA1C},
- {0xa0, 0x00, ZC3XX_R13D_GAMMA1D},
- {0xa0, 0x00, ZC3XX_R13E_GAMMA1E},
- {0xa0, 0x01, ZC3XX_R13F_GAMMA1F},
- {0xa0, 0x4c, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf1, ZC3XX_R10B_RGB01},
- {0xa0, 0x03, ZC3XX_R10C_RGB02},
- {0xa0, 0xfe, ZC3XX_R10D_RGB10},
- {0xa0, 0x51, ZC3XX_R10E_RGB11},
- {0xa0, 0xf1, ZC3XX_R10F_RGB12},
- {0xa0, 0xec, ZC3XX_R110_RGB20},
- {0xa0, 0x03, ZC3XX_R111_RGB21},
- {0xa0, 0x51, ZC3XX_R112_RGB22},
- {0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xa0, 0x05, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x09, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x09, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x34, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0xd2, ZC3XX_R192_EXPOSURELIMITLOW},
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x9a, ZC3XX_R197_ANTIFLICKERLOW},
- {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
- {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xaa, 0x6b, 0x00a0}, /* 00,6b,a0,aa */
+ {0xaa, 0x6c, 0x0054}, /* 00,6c,54,aa */
+ {0xaa, 0xd6, 0x0007}, /* 00,d6,07,aa */
+ {0xa0, 0xf7, ZC3XX_R101_SENSORCORRECTION}, /* 01,01,f7,cc */
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC}, /* 00,12,05,cc */
+ {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE}, /* 01,00,0d,cc */
+ {0xa0, 0x06, ZC3XX_R189_AWBSTATUS}, /* 01,89,06,cc */
+ {0xa0, 0x00, 0x01ad}, /* 01,ad,00,cc */
+ {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE}, /* 01,c5,03,cc */
+ {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05}, /* 01,cb,13,cc */
+ {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* 02,50,08,cc */
+ {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS}, /* 03,01,08,cc */
+ {0xa0, 0x7a, ZC3XX_R116_RGAIN}, /* 01,16,7a,cc */
+ {0xa0, 0x4a, ZC3XX_R118_BGAIN}, /* 01,18,4a,cc */
{}
};
-static const struct usb_action tas5130cK_Initial[] = {
- {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x01, 0x003b},
- {0xa0, 0x0e, 0x003a},
- {0xa0, 0x01, 0x0038},
- {0xa0, 0x0b, 0x0039},
- {0xa0, 0x00, 0x0038},
- {0xa0, 0x0b, 0x0039},
- {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
- {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
- {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
- {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
- {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
- {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
- {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
- {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
- {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
- {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
- {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
- {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x01, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x06, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x83, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x04, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x06, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x02, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x03, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0xe5, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x04, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x85, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x02, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x07, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x02, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x30, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x20, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x51, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x35, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7F, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x50, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x30, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x05, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x31, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x58, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x78, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x62, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2B, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2C, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7F, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2D, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2e, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
- {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
- {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
- {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
- {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
- {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x6c, ZC3XX_R18D_YTARGET},
- {0xa0, 0x61, ZC3XX_R116_RGAIN},
- {0xa0, 0x65, ZC3XX_R118_BGAIN},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x4c, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf1, ZC3XX_R10B_RGB01},
- {0xa0, 0x03, ZC3XX_R10C_RGB02},
- {0xa0, 0xfe, ZC3XX_R10D_RGB10},
- {0xa0, 0x51, ZC3XX_R10E_RGB11},
- {0xa0, 0xf1, ZC3XX_R10F_RGB12},
- {0xa0, 0xec, ZC3XX_R110_RGB20},
- {0xa0, 0x03, ZC3XX_R111_RGB21},
- {0xa0, 0x51, ZC3XX_R112_RGB22},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
- {0xa0, 0x38, ZC3XX_R120_GAMMA00}, /* gamma > 5 */
- {0xa0, 0x51, ZC3XX_R121_GAMMA01},
- {0xa0, 0x6e, ZC3XX_R122_GAMMA02},
- {0xa0, 0x8c, ZC3XX_R123_GAMMA03},
- {0xa0, 0xa2, ZC3XX_R124_GAMMA04},
- {0xa0, 0xb6, ZC3XX_R125_GAMMA05},
- {0xa0, 0xc8, ZC3XX_R126_GAMMA06},
- {0xa0, 0xd6, ZC3XX_R127_GAMMA07},
- {0xa0, 0xe2, ZC3XX_R128_GAMMA08},
- {0xa0, 0xed, ZC3XX_R129_GAMMA09},
- {0xa0, 0xf5, ZC3XX_R12A_GAMMA0A},
- {0xa0, 0xfc, ZC3XX_R12B_GAMMA0B},
- {0xa0, 0xff, ZC3XX_R12C_GAMMA0C},
- {0xa0, 0xff, ZC3XX_R12D_GAMMA0D},
- {0xa0, 0xff, ZC3XX_R12E_GAMMA0E},
- {0xa0, 0xff, ZC3XX_R12F_GAMMA0F},
- {0xa0, 0x12, ZC3XX_R130_GAMMA10},
- {0xa0, 0x1b, ZC3XX_R131_GAMMA11},
- {0xa0, 0x1d, ZC3XX_R132_GAMMA12},
- {0xa0, 0x1a, ZC3XX_R133_GAMMA13},
- {0xa0, 0x15, ZC3XX_R134_GAMMA14},
- {0xa0, 0x12, ZC3XX_R135_GAMMA15},
- {0xa0, 0x0f, ZC3XX_R136_GAMMA16},
- {0xa0, 0x0d, ZC3XX_R137_GAMMA17},
- {0xa0, 0x0b, ZC3XX_R138_GAMMA18},
- {0xa0, 0x09, ZC3XX_R139_GAMMA19},
- {0xa0, 0x07, ZC3XX_R13A_GAMMA1A},
- {0xa0, 0x05, ZC3XX_R13B_GAMMA1B},
- {0xa0, 0x00, ZC3XX_R13C_GAMMA1C},
- {0xa0, 0x00, ZC3XX_R13D_GAMMA1D},
- {0xa0, 0x00, ZC3XX_R13E_GAMMA1E},
- {0xa0, 0x01, ZC3XX_R13F_GAMMA1F},
- {0xa0, 0x4c, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf1, ZC3XX_R10B_RGB01},
- {0xa0, 0x03, ZC3XX_R10C_RGB02},
- {0xa0, 0xfe, ZC3XX_R10D_RGB10},
- {0xa0, 0x51, ZC3XX_R10E_RGB11},
- {0xa0, 0xf1, ZC3XX_R10F_RGB12},
- {0xa0, 0xec, ZC3XX_R110_RGB20},
- {0xa0, 0x03, ZC3XX_R111_RGB21},
- {0xa0, 0x51, ZC3XX_R112_RGB22},
- {0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xa0, 0x05, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x62, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x09, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0xaa, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
- {0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0x9b, ZC3XX_R192_EXPOSURELIMITLOW},
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x47, ZC3XX_R197_ANTIFLICKERLOW},
- {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa0, 0x62, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0x90, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xc8, ZC3XX_R01F_HSYNC_2},
- {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
- {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x30, 0x0007},
- {0xa0, 0x02, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x00, 0x0007},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+static const struct usb_action po2030_50HZ[] = {
+ {0xaa, 0x8d, 0x0008}, /* 00,8d,08,aa */
+ {0xaa, 0x1a, 0x0001}, /* 00,1a,01,aa */
+ {0xaa, 0x1b, 0x000a}, /* 00,1b,0a,aa */
+ {0xaa, 0x1c, 0x00b0}, /* 00,1c,b0,aa */
+ {0xa0, 0x05, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,05,cc */
+ {0xa0, 0x35, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,35,cc */
+ {0xa0, 0x70, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,70,cc */
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
+ {0xa0, 0x85, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,85,cc */
+ {0xa0, 0x58, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,58,cc */
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE}, /* 01,8c,0c,cc */
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,18,cc */
+ {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,60,cc */
+ {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
+ {0xa0, 0x22, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,22,cc */
+ {0xa0, 0x88, ZC3XX_R18D_YTARGET}, /* 01,8d,88,cc */
+ {0xa0, 0x58, ZC3XX_R11D_GLOBALGAIN}, /* 01,1d,58,cc */
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE}, /* 01,80,42,cc */
+ {}
+};
+
+static const struct usb_action po2030_60HZ[] = {
+ {0xaa, 0x8d, 0x0008}, /* 00,8d,08,aa */
+ {0xaa, 0x1a, 0x0000}, /* 00,1a,00,aa */
+ {0xaa, 0x1b, 0x00de}, /* 00,1b,de,aa */
+ {0xaa, 0x1c, 0x0040}, /* 00,1c,40,aa */
+ {0xa0, 0x08, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,08,cc */
+ {0xa0, 0xae, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,ae,cc */
+ {0xa0, 0x80, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,80,cc */
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
+ {0xa0, 0x6f, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,6f,cc */
+ {0xa0, 0x20, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,20,cc */
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE}, /* 01,8c,0c,cc */
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,18,cc */
+ {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,60,cc */
+ {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
+ {0xa0, 0x22, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,22,cc */
+ {0xa0, 0x88, ZC3XX_R18D_YTARGET}, /* 01,8d,88,cc */
+ /* win: 01,8d,80 */
+ {0xa0, 0x58, ZC3XX_R11D_GLOBALGAIN}, /* 01,1d,58,cc */
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE}, /* 01,80,42,cc */
+ {}
+};
+
+static const struct usb_action po2030_NoFliker[] = {
+ {0xa0, 0x02, ZC3XX_R180_AUTOCORRECTENABLE}, /* 01,80,02,cc */
+ {0xaa, 0x8d, 0x000d}, /* 00,8d,0d,aa */
+ {0xaa, 0x1a, 0x0000}, /* 00,1a,00,aa */
+ {0xaa, 0x1b, 0x0002}, /* 00,1b,02,aa */
+ {0xaa, 0x1c, 0x0078}, /* 00,1c,78,aa */
+ {0xaa, 0x46, 0x0000}, /* 00,46,00,aa */
+ {0xaa, 0x15, 0x0000}, /* 00,15,00,aa */
{}
};
-static const struct usb_action tas5130cxx_InitialScale[] = { /* 320x240 */
+static const struct usb_action tas5130c_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x50, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x02, ZC3XX_R0A6_EXPOSUREBLACKLVL},
{}
};
-static const struct usb_action tas5130cxx_Initial[] = { /* 640x480 */
+static const struct usb_action tas5130c_Initial[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x40, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x00, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x02, ZC3XX_R0A6_EXPOSUREBLACKLVL},
{}
};
-static const struct usb_action tas5130cxx_50HZ[] = {
+static const struct usb_action tas5130c_50HZ[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0063}, /* 00,a4,63,aa */
{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
-static const struct usb_action tas5130cxx_50HZScale[] = {
+static const struct usb_action tas5130c_50HZScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0077}, /* 00,a4,77,aa */
{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
-static const struct usb_action tas5130cxx_60HZ[] = {
+static const struct usb_action tas5130c_60HZ[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0036}, /* 00,a4,36,aa */
{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
-static const struct usb_action tas5130cxx_60HZScale[] = {
+static const struct usb_action tas5130c_60HZScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0077}, /* 00,a4,77,aa */
{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
-static const struct usb_action tas5130cxx_NoFliker[] = {
+static const struct usb_action tas5130c_NoFliker[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0040}, /* 00,a4,40,aa */
{}
};
-static const struct usb_action tas5130cxx_NoFlikerScale[] = {
+static const struct usb_action tas5130c_NoFlikerScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0090}, /* 00,a4,90,aa */
static u8 reg_r_i(struct gspca_dev *gspca_dev,
u16 index)
{
- usb_control_msg(gspca_dev->dev,
+ int ret;
+
+ if (gspca_dev->usb_err < 0)
+ return 0;
+ ret = usb_control_msg(gspca_dev->dev,
usb_rcvctrlpipe(gspca_dev->dev, 0),
0xa1,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x01, /* value */
index, gspca_dev->usb_buf, 1,
500);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "reg_r_i err %d", ret);
+ gspca_dev->usb_err = ret;
+ return 0;
+ }
return gspca_dev->usb_buf[0];
}
return ret;
}
-static void reg_w_i(struct usb_device *dev,
+static void reg_w_i(struct gspca_dev *gspca_dev,
u8 value,
u16 index)
{
- usb_control_msg(dev,
- usb_sndctrlpipe(dev, 0),
+ int ret;
+
+ if (gspca_dev->usb_err < 0)
+ return;
+ ret = usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
0xa0,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, index, NULL, 0,
500);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "reg_w_i err %d", ret);
+ gspca_dev->usb_err = ret;
+ }
}
-static void reg_w(struct usb_device *dev,
+static void reg_w(struct gspca_dev *gspca_dev,
u8 value,
u16 index)
{
PDEBUG(D_USBO, "reg w [%04x] = %02x", index, value);
- reg_w_i(dev, value, index);
+ reg_w_i(gspca_dev, value, index);
}
static u16 i2c_read(struct gspca_dev *gspca_dev,
u8 retbyte;
u16 retval;
- reg_w_i(gspca_dev->dev, reg, 0x0092);
- reg_w_i(gspca_dev->dev, 0x02, 0x0090); /* <- read command */
+ if (gspca_dev->usb_err < 0)
+ return 0;
+ reg_w_i(gspca_dev, reg, 0x0092);
+ reg_w_i(gspca_dev, 0x02, 0x0090); /* <- read command */
msleep(20);
retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */
if (retbyte != 0x00)
{
u8 retbyte;
- reg_w_i(gspca_dev->dev, reg, 0x92);
- reg_w_i(gspca_dev->dev, valL, 0x93);
- reg_w_i(gspca_dev->dev, valH, 0x94);
- reg_w_i(gspca_dev->dev, 0x01, 0x90); /* <- write command */
+ if (gspca_dev->usb_err < 0)
+ return 0;
+ reg_w_i(gspca_dev, reg, 0x92);
+ reg_w_i(gspca_dev, valL, 0x93);
+ reg_w_i(gspca_dev, valH, 0x94);
+ reg_w_i(gspca_dev, 0x01, 0x90); /* <- write command */
msleep(1);
retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */
if (retbyte != 0x00)
while (action->req) {
switch (action->req) {
case 0xa0: /* write register */
- reg_w(gspca_dev->dev, action->val, action->idx);
+ reg_w(gspca_dev, action->val, action->idx);
break;
case 0xa1: /* read status */
reg_r(gspca_dev, action->idx);
static const u8 vf0250_matrix[9] =
{0x7b, 0xea, 0xea, 0xea, 0x7b, 0xea, 0xea, 0xea, 0x7b};
static const u8 *matrix_tb[SENSOR_MAX] = {
- adcm2700_matrix, /* SENSOR_ADCM2700 0 */
- ov7620_matrix, /* SENSOR_CS2102 1 */
- NULL, /* SENSOR_CS2102K 2 */
- gc0305_matrix, /* SENSOR_GC0305 3 */
- NULL, /* SENSOR_HDCS2020b 4 */
- NULL, /* SENSOR_HV7131B 5 */
- NULL, /* SENSOR_HV7131C 6 */
- NULL, /* SENSOR_ICM105A 7 */
- NULL, /* SENSOR_MC501CB 8 */
- gc0305_matrix, /* SENSOR_MI0360SOC 9 */
- ov7620_matrix, /* SENSOR_OV7620 10 */
- NULL, /* SENSOR_OV7630C 11 */
- NULL, /* SENSOR_PAS106 12 */
- pas202b_matrix, /* SENSOR_PAS202B 13 */
- gc0305_matrix, /* SENSOR_PB0330 14 */
- po2030_matrix, /* SENSOR_PO2030 15 */
- NULL, /* SENSOR_TAS5130CK 16 */
- tas5130c_matrix, /* SENSOR_TAS5130CXX 17 */
- vf0250_matrix, /* SENSOR_TAS5130C_VF0250 18 */
+ [SENSOR_ADCM2700] = adcm2700_matrix,
+ [SENSOR_CS2102] = ov7620_matrix,
+ [SENSOR_CS2102K] = NULL,
+ [SENSOR_GC0305] = gc0305_matrix,
+ [SENSOR_HDCS2020b] = NULL,
+ [SENSOR_HV7131B] = NULL,
+ [SENSOR_HV7131R] = NULL,
+ [SENSOR_ICM105A] = po2030_matrix,
+ [SENSOR_MC501CB] = NULL,
+ [SENSOR_MT9V111_1] = gc0305_matrix,
+ [SENSOR_MT9V111_3] = gc0305_matrix,
+ [SENSOR_OV7620] = ov7620_matrix,
+ [SENSOR_OV7630C] = NULL,
+ [SENSOR_PAS106] = NULL,
+ [SENSOR_PAS202B] = pas202b_matrix,
+ [SENSOR_PB0330] = gc0305_matrix,
+ [SENSOR_PO2030] = po2030_matrix,
+ [SENSOR_TAS5130C] = tas5130c_matrix,
+ [SENSOR_TAS5130C_VF0250] = vf0250_matrix,
};
matrix = matrix_tb[sd->sensor];
if (matrix == NULL)
return; /* matrix already loaded */
for (i = 0; i < ARRAY_SIZE(ov7620_matrix); i++)
- reg_w(gspca_dev->dev, matrix[i], 0x010a + i);
+ reg_w(gspca_dev, matrix[i], 0x010a + i);
}
static void setsharpness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
int sharpness;
static const u8 sharpness_tb[][2] = {
{0x02, 0x03},
};
sharpness = sd->sharpness;
- reg_w(dev, sharpness_tb[sharpness][0], 0x01c6);
+ reg_w(gspca_dev, sharpness_tb[sharpness][0], 0x01c6);
reg_r(gspca_dev, 0x01c8);
reg_r(gspca_dev, 0x01c9);
reg_r(gspca_dev, 0x01ca);
- reg_w(dev, sharpness_tb[sharpness][1], 0x01cb);
+ reg_w(gspca_dev, sharpness_tb[sharpness][1], 0x01cb);
}
static void setcontrast(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
const u8 *Tgamma;
int g, i, brightness, contrast, adj, gp1, gp2;
u8 gr[16];
g = 0xff;
else if (g < 0)
g = 0;
- reg_w(dev, g, 0x0120 + i); /* gamma */
+ reg_w(gspca_dev, g, 0x0120 + i); /* gamma */
if (contrast > 0)
adj--;
else if (contrast < 0)
}
gr[15] = (0xff - gp2) / 2;
for (i = 0; i < 16; i++)
- reg_w(dev, gr[i], 0x0130 + i); /* gradient */
+ reg_w(gspca_dev, gr[i], 0x0130 + i); /* gradient */
}
static void setquality(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
u8 frxt;
switch (sd->sensor) {
return;
}
/*fixme: is it really 0008 0007 0018 for all other sensors? */
- reg_w(dev, QUANT_VAL, 0x0008);
+ reg_w(gspca_dev, QUANT_VAL, 0x0008);
frxt = 0x30;
- reg_w(dev, frxt, 0x0007);
+ reg_w(gspca_dev, frxt, 0x0007);
#if QUANT_VAL == 0 || QUANT_VAL == 1 || QUANT_VAL == 2
frxt = 0xff;
#elif QUANT_VAL == 3
#else
frxt = 0x20;
#endif
- reg_w(dev, frxt, 0x0018);
+ reg_w(gspca_dev, frxt, 0x0018);
}
/* Matches the sensor's internal frame rate to the lighting frequency.
* 50Hz, for European and Asian lighting (default)
* 60Hz, for American lighting
* 0 = No Fliker (for outdoore usage)
- * Returns: 0 for success
*/
-static int setlightfreq(struct gspca_dev *gspca_dev)
+static void setlightfreq(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
int i, mode;
const struct usb_action *zc3_freq;
static const struct usb_action *freq_tb[SENSOR_MAX][6] = {
-/* SENSOR_ADCM2700 0 */
+ [SENSOR_ADCM2700] =
{adcm2700_NoFliker, adcm2700_NoFliker,
adcm2700_50HZ, adcm2700_50HZ,
adcm2700_60HZ, adcm2700_60HZ},
-/* SENSOR_CS2102 1 */
+ [SENSOR_CS2102] =
{cs2102_NoFliker, cs2102_NoFlikerScale,
cs2102_50HZ, cs2102_50HZScale,
cs2102_60HZ, cs2102_60HZScale},
-/* SENSOR_CS2102K 2 */
+ [SENSOR_CS2102K] =
{cs2102_NoFliker, cs2102_NoFlikerScale,
NULL, NULL, /* currently disabled */
NULL, NULL},
-/* SENSOR_GC0305 3 */
+ [SENSOR_GC0305] =
{gc0305_NoFliker, gc0305_NoFliker,
gc0305_50HZ, gc0305_50HZ,
gc0305_60HZ, gc0305_60HZ},
-/* SENSOR_HDCS2020b 4 */
+ [SENSOR_HDCS2020b] =
{hdcs2020b_NoFliker, hdcs2020b_NoFliker,
hdcs2020b_50HZ, hdcs2020b_50HZ,
hdcs2020b_60HZ, hdcs2020b_60HZ},
-/* SENSOR_HV7131B 5 */
+ [SENSOR_HV7131B] =
{hv7131b_NoFliker, hv7131b_NoFlikerScale,
hv7131b_50HZ, hv7131b_50HZScale,
hv7131b_60HZ, hv7131b_60HZScale},
-/* SENSOR_HV7131C 6 */
- {NULL, NULL,
- NULL, NULL,
- NULL, NULL},
-/* SENSOR_ICM105A 7 */
+ [SENSOR_HV7131R] =
+ {hv7131r_NoFliker, hv7131r_NoFlikerScale,
+ hv7131r_50HZ, hv7131r_50HZScale,
+ hv7131r_60HZ, hv7131r_60HZScale},
+ [SENSOR_ICM105A] =
{icm105a_NoFliker, icm105a_NoFlikerScale,
icm105a_50HZ, icm105a_50HZScale,
icm105a_60HZ, icm105a_60HZScale},
-/* SENSOR_MC501CB 8 */
+ [SENSOR_MC501CB] =
{mc501cb_NoFliker, mc501cb_NoFlikerScale,
mc501cb_50HZ, mc501cb_50HZScale,
mc501cb_60HZ, mc501cb_60HZScale},
-/* SENSOR_MI0360SOC 9 */
- {mi360soc_AENoFliker, mi360soc_AENoFlikerScale,
- mi360soc_AE50HZ, mi360soc_AE50HZScale,
- mi360soc_AE60HZ, mi360soc_AE60HZScale},
-/* SENSOR_OV7620 10 */
+ [SENSOR_MT9V111_1] =
+ {mt9v111_1_AENoFliker, mt9v111_1_AENoFlikerScale,
+ mt9v111_1_AE50HZ, mt9v111_1_AE50HZScale,
+ mt9v111_1_AE60HZ, mt9v111_1_AE60HZScale},
+ [SENSOR_MT9V111_3] =
+ {mt9v111_3_AENoFliker, mt9v111_3_AENoFlikerScale,
+ mt9v111_3_AE50HZ, mt9v111_3_AE50HZScale,
+ mt9v111_3_AE60HZ, mt9v111_3_AE60HZScale},
+ [SENSOR_OV7620] =
{ov7620_NoFliker, ov7620_NoFliker,
ov7620_50HZ, ov7620_50HZ,
ov7620_60HZ, ov7620_60HZ},
-/* SENSOR_OV7630C 11 */
+ [SENSOR_OV7630C] =
{NULL, NULL,
NULL, NULL,
NULL, NULL},
-/* SENSOR_PAS106 12 */
+ [SENSOR_PAS106] =
{pas106b_NoFliker, pas106b_NoFliker,
pas106b_50HZ, pas106b_50HZ,
pas106b_60HZ, pas106b_60HZ},
-/* SENSOR_PAS202B 13 */
+ [SENSOR_PAS202B] =
{pas202b_NoFliker, pas202b_NoFlikerScale,
pas202b_50HZ, pas202b_50HZScale,
pas202b_60HZ, pas202b_60HZScale},
-/* SENSOR_PB0330 14 */
+ [SENSOR_PB0330] =
{pb0330_NoFliker, pb0330_NoFlikerScale,
pb0330_50HZ, pb0330_50HZScale,
pb0330_60HZ, pb0330_60HZScale},
-/* SENSOR_PO2030 15 */
+ [SENSOR_PO2030] =
{po2030_NoFliker, po2030_NoFliker,
po2030_50HZ, po2030_50HZ,
po2030_60HZ, po2030_60HZ},
-/* SENSOR_TAS5130CK 16 */
- {tas5130cxx_NoFliker, tas5130cxx_NoFlikerScale,
- tas5130cxx_50HZ, tas5130cxx_50HZScale,
- tas5130cxx_60HZ, tas5130cxx_60HZScale},
-/* SENSOR_TAS5130CXX 17 */
- {tas5130cxx_NoFliker, tas5130cxx_NoFlikerScale,
- tas5130cxx_50HZ, tas5130cxx_50HZScale,
- tas5130cxx_60HZ, tas5130cxx_60HZScale},
-/* SENSOR_TAS5130C_VF0250 18 */
+ [SENSOR_TAS5130C] =
+ {tas5130c_NoFliker, tas5130c_NoFlikerScale,
+ tas5130c_50HZ, tas5130c_50HZScale,
+ tas5130c_60HZ, tas5130c_60HZScale},
+ [SENSOR_TAS5130C_VF0250] =
{tas5130c_vf0250_NoFliker, tas5130c_vf0250_NoFlikerScale,
tas5130c_vf0250_50HZ, tas5130c_vf0250_50HZScale,
tas5130c_vf0250_60HZ, tas5130c_vf0250_60HZScale},
if (mode)
i++; /* 320x240 */
zc3_freq = freq_tb[sd->sensor][i];
- if (zc3_freq != NULL) {
- usb_exchange(gspca_dev, zc3_freq);
- switch (sd->sensor) {
- case SENSOR_GC0305:
- if (mode /* if 320x240 */
- && sd->lightfreq == 1) /* and 50Hz */
- reg_w(gspca_dev->dev, 0x85, 0x018d);
- /* win: 0x80, 0x018d */
- break;
- case SENSOR_OV7620:
- if (!mode) { /* if 640x480 */
- if (sd->lightfreq != 0) /* and 50 or 60 Hz */
- reg_w(gspca_dev->dev, 0x40, 0x0002);
- else
- reg_w(gspca_dev->dev, 0x44, 0x0002);
- }
- break;
- case SENSOR_PAS202B:
- reg_w(gspca_dev->dev, 0x00, 0x01a7);
- break;
+ if (zc3_freq == NULL)
+ return;
+ usb_exchange(gspca_dev, zc3_freq);
+ switch (sd->sensor) {
+ case SENSOR_GC0305:
+ if (mode /* if 320x240 */
+ && sd->lightfreq == 1) /* and 50Hz */
+ reg_w(gspca_dev, 0x85, 0x018d);
+ /* win: 0x80, 0x018d */
+ break;
+ case SENSOR_OV7620:
+ if (!mode) { /* if 640x480 */
+ if (sd->lightfreq != 0) /* and 50 or 60 Hz */
+ reg_w(gspca_dev, 0x40, 0x0002);
+ else
+ reg_w(gspca_dev, 0x44, 0x0002);
}
+ break;
+ case SENSOR_PAS202B:
+ reg_w(gspca_dev, 0x00, 0x01a7);
+ break;
}
- return 0;
}
static void setautogain(struct gspca_dev *gspca_dev)
autoval = 0x42;
else
autoval = 0x02;
- reg_w(gspca_dev->dev, autoval, 0x0180);
+ reg_w(gspca_dev, autoval, 0x0180);
}
-static void send_unknown(struct usb_device *dev, int sensor)
+static void send_unknown(struct gspca_dev *gspca_dev, int sensor)
{
- reg_w(dev, 0x01, 0x0000); /* led off */
+ reg_w(gspca_dev, 0x01, 0x0000); /* led off */
switch (sensor) {
case SENSOR_PAS106:
- reg_w(dev, 0x03, 0x003a);
- reg_w(dev, 0x0c, 0x003b);
- reg_w(dev, 0x08, 0x0038);
+ reg_w(gspca_dev, 0x03, 0x003a);
+ reg_w(gspca_dev, 0x0c, 0x003b);
+ reg_w(gspca_dev, 0x08, 0x0038);
break;
case SENSOR_ADCM2700:
case SENSOR_GC0305:
case SENSOR_OV7620:
- case SENSOR_MI0360SOC:
+ case SENSOR_MT9V111_1:
+ case SENSOR_MT9V111_3:
case SENSOR_PB0330:
case SENSOR_PO2030:
- reg_w(dev, 0x0d, 0x003a);
- reg_w(dev, 0x02, 0x003b);
- reg_w(dev, 0x00, 0x0038);
+ reg_w(gspca_dev, 0x0d, 0x003a);
+ reg_w(gspca_dev, 0x02, 0x003b);
+ reg_w(gspca_dev, 0x00, 0x0038);
break;
case SENSOR_PAS202B:
- reg_w(dev, 0x03, 0x003b);
- reg_w(dev, 0x0c, 0x003a);
- reg_w(dev, 0x0b, 0x0039);
- reg_w(dev, 0x0b, 0x0038);
+ reg_w(gspca_dev, 0x03, 0x003b);
+ reg_w(gspca_dev, 0x0c, 0x003a);
+ reg_w(gspca_dev, 0x0b, 0x0039);
+ reg_w(gspca_dev, 0x0b, 0x0038);
break;
}
}
/* start probe 2 wires */
-static void start_2wr_probe(struct usb_device *dev, int sensor)
+static void start_2wr_probe(struct gspca_dev *gspca_dev, int sensor)
{
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, sensor, 0x0010);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0x03, 0x0012);
- reg_w(dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, sensor, 0x0010);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
/* msleep(2); */
}
{
u16 checkword;
- start_2wr_probe(gspca_dev->dev, 0x0f); /* PAS106 */
- reg_w(gspca_dev->dev, 0x08, 0x008d);
+ start_2wr_probe(gspca_dev, 0x0f); /* PAS106 */
+ reg_w(gspca_dev, 0x08, 0x008d);
msleep(150);
checkword = ((i2c_read(gspca_dev, 0x00) & 0x0f) << 4)
| ((i2c_read(gspca_dev, 0x01) & 0xf0) >> 4);
PDEBUG(D_PROBE, "probe sif 0x%04x", checkword);
if (checkword == 0x0007) {
- send_unknown(gspca_dev->dev, SENSOR_PAS106);
+ send_unknown(gspca_dev, SENSOR_PAS106);
return 0x0f; /* PAS106 */
}
return -1;
static int vga_2wr_probe(struct gspca_dev *gspca_dev)
{
- struct usb_device *dev = gspca_dev->dev;
u16 retword;
- start_2wr_probe(dev, 0x00); /* HV7131B */
+ start_2wr_probe(gspca_dev, 0x00); /* HV7131B */
i2c_write(gspca_dev, 0x01, 0xaa, 0x00);
retword = i2c_read(gspca_dev, 0x01);
if (retword != 0)
return 0x00; /* HV7131B */
- start_2wr_probe(dev, 0x04); /* CS2102 */
+ start_2wr_probe(gspca_dev, 0x04); /* CS2102 */
i2c_write(gspca_dev, 0x01, 0xaa, 0x00);
retword = i2c_read(gspca_dev, 0x01);
if (retword != 0)
return 0x04; /* CS2102 */
- start_2wr_probe(dev, 0x06); /* OmniVision */
- reg_w(dev, 0x08, 0x008d);
+ start_2wr_probe(gspca_dev, 0x06); /* OmniVision */
+ reg_w(gspca_dev, 0x08, 0x008d);
i2c_write(gspca_dev, 0x11, 0xaa, 0x00);
retword = i2c_read(gspca_dev, 0x11);
if (retword != 0) {
goto ov_check;
}
- start_2wr_probe(dev, 0x08); /* HDCS2020 */
+ start_2wr_probe(gspca_dev, 0x08); /* HDCS2020 */
i2c_write(gspca_dev, 0x1c, 0x00, 0x00);
i2c_write(gspca_dev, 0x15, 0xaa, 0x00);
retword = i2c_read(gspca_dev, 0x15);
if (retword != 0)
return 0x08; /* HDCS2020 */
- start_2wr_probe(dev, 0x0a); /* PB0330 */
+ start_2wr_probe(gspca_dev, 0x0a); /* PB0330 */
i2c_write(gspca_dev, 0x07, 0xaa, 0xaa);
retword = i2c_read(gspca_dev, 0x07);
if (retword != 0)
if (retword != 0)
return 0x0a; /* PB0330 ?? */
- start_2wr_probe(dev, 0x0c); /* ICM105A */
+ start_2wr_probe(gspca_dev, 0x0c); /* ICM105A */
i2c_write(gspca_dev, 0x01, 0x11, 0x00);
retword = i2c_read(gspca_dev, 0x01);
if (retword != 0)
return 0x0c; /* ICM105A */
- start_2wr_probe(dev, 0x0e); /* PAS202BCB */
- reg_w(dev, 0x08, 0x008d);
+ start_2wr_probe(gspca_dev, 0x0e); /* PAS202BCB */
+ reg_w(gspca_dev, 0x08, 0x008d);
i2c_write(gspca_dev, 0x03, 0xaa, 0x00);
msleep(50);
retword = i2c_read(gspca_dev, 0x03);
if (retword != 0) {
- send_unknown(dev, SENSOR_PAS202B);
+ send_unknown(gspca_dev, SENSOR_PAS202B);
return 0x0e; /* PAS202BCB */
}
- start_2wr_probe(dev, 0x02); /* TAS5130C */
+ start_2wr_probe(gspca_dev, 0x02); /* TAS5130C */
i2c_write(gspca_dev, 0x01, 0xaa, 0x00);
retword = i2c_read(gspca_dev, 0x01);
if (retword != 0)
reg_r(gspca_dev, 0x0010); /* ?? */
reg_r(gspca_dev, 0x0010);
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0x06, 0x0010); /* OmniVision */
- reg_w(dev, 0xa1, 0x008b);
- reg_w(dev, 0x08, 0x008d);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0x06, 0x0010); /* OmniVision */
+ reg_w(gspca_dev, 0xa1, 0x008b);
+ reg_w(gspca_dev, 0x08, 0x008d);
msleep(500);
- reg_w(dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
i2c_write(gspca_dev, 0x12, 0x80, 0x00); /* sensor reset */
retword = i2c_read(gspca_dev, 0x0a) << 8;
retword |= i2c_read(gspca_dev, 0x0b);
PDEBUG(D_PROBE, "probe 2wr ov vga 0x%04x", retword);
switch (retword) {
case 0x7631: /* OV7630C */
- reg_w(dev, 0x06, 0x0010);
+ reg_w(gspca_dev, 0x06, 0x0010);
break;
case 0x7620: /* OV7620 */
case 0x7648: /* OV7648 */
};
static const struct sensor_by_chipset_revision chipset_revision_sensor[] = {
{0xc000, 0x12}, /* TAS5130C */
- {0xc001, 0x13}, /* MI0360SOC */
+ {0xc001, 0x13}, /* MT9V111 */
{0xe001, 0x13},
{0x8001, 0x13},
{0x8000, 0x14}, /* CS2102K */
- {0x8400, 0x15}, /* TAS5130K */
+ {0x8400, 0x15}, /* MT9V111 */
{0xe400, 0x15},
};
static int vga_3wr_probe(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
int i;
u8 retbyte;
u16 retword;
/*fixme: lack of 8b=b3 (11,12)-> 10, 8b=e0 (14,15,16)-> 12 found in gspcav1*/
- reg_w(dev, 0x02, 0x0010);
+ reg_w(gspca_dev, 0x02, 0x0010);
reg_r(gspca_dev, 0x0010);
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, 0x00, 0x0010);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0x91, 0x008b);
- reg_w(dev, 0x03, 0x0012);
- reg_w(dev, 0x01, 0x0012);
- reg_w(dev, 0x05, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, 0x00, 0x0010);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0x91, 0x008b);
+ reg_w(gspca_dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x05, 0x0012);
retword = i2c_read(gspca_dev, 0x14);
if (retword != 0)
return 0x11; /* HV7131R */
if (retword != 0)
return 0x11; /* HV7131R */
- reg_w(dev, 0x02, 0x0010);
+ reg_w(gspca_dev, 0x02, 0x0010);
retword = reg_r(gspca_dev, 0x000b) << 8;
retword |= reg_r(gspca_dev, 0x000a);
PDEBUG(D_PROBE, "probe 3wr vga 1 0x%04x", retword);
reg_r(gspca_dev, 0x0010);
- /* value 0x4001 is meaningless */
- if (retword != 0x4001) {
- if ((retword & 0xff00) == 0x6400)
- return 0x02; /* TAS5130C */
- for (i = 0; i < ARRAY_SIZE(chipset_revision_sensor); i++) {
- if (chipset_revision_sensor[i].revision == retword) {
- sd->chip_revision = retword;
- send_unknown(dev, SENSOR_PB0330);
- return chipset_revision_sensor[i]
- .internal_sensor_id;
- }
+ if ((retword & 0xff00) == 0x6400)
+ return 0x02; /* TAS5130C */
+ for (i = 0; i < ARRAY_SIZE(chipset_revision_sensor); i++) {
+ if (chipset_revision_sensor[i].revision == retword) {
+ sd->chip_revision = retword;
+ send_unknown(gspca_dev, SENSOR_PB0330);
+ return chipset_revision_sensor[i]
+ .internal_sensor_id;
}
}
- reg_w(dev, 0x01, 0x0000); /* check PB0330 */
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0xdd, 0x008b);
- reg_w(dev, 0x0a, 0x0010);
- reg_w(dev, 0x03, 0x0012);
- reg_w(dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000); /* check PB0330 */
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0xdd, 0x008b);
+ reg_w(gspca_dev, 0x0a, 0x0010);
+ reg_w(gspca_dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
retword = i2c_read(gspca_dev, 0x00);
if (retword != 0) {
- PDEBUG(D_PROBE, "probe 3wr vga type 0a ?");
+ PDEBUG(D_PROBE, "probe 3wr vga type 0a");
return 0x0a; /* PB0330 */
}
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0x98, 0x008b);
- reg_w(dev, 0x01, 0x0010);
- reg_w(dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0x98, 0x008b);
+ reg_w(gspca_dev, 0x01, 0x0010);
+ reg_w(gspca_dev, 0x03, 0x0012);
msleep(2);
- reg_w(dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
retword = i2c_read(gspca_dev, 0x00);
if (retword != 0) {
PDEBUG(D_PROBE, "probe 3wr vga type %02x", retword);
if (retword == 0x0011) /* VF0250 */
return 0x0250;
if (retword == 0x0029) /* gc0305 */
- send_unknown(dev, SENSOR_GC0305);
+ send_unknown(gspca_dev, SENSOR_GC0305);
return retword;
}
- reg_w(dev, 0x01, 0x0000); /* check OmniVision */
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0xa1, 0x008b);
- reg_w(dev, 0x08, 0x008d);
- reg_w(dev, 0x06, 0x0010);
- reg_w(dev, 0x01, 0x0012);
- reg_w(dev, 0x05, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000); /* check OmniVision */
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0xa1, 0x008b);
+ reg_w(gspca_dev, 0x08, 0x008d);
+ reg_w(gspca_dev, 0x06, 0x0010);
+ reg_w(gspca_dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x05, 0x0012);
if (i2c_read(gspca_dev, 0x1c) == 0x007f /* OV7610 - manufacturer ID */
&& i2c_read(gspca_dev, 0x1d) == 0x00a2) {
- send_unknown(dev, SENSOR_OV7620);
+ send_unknown(gspca_dev, SENSOR_OV7620);
return 0x06; /* OmniVision confirm ? */
}
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, 0x00, 0x0002);
- reg_w(dev, 0x01, 0x0010);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0xee, 0x008b);
- reg_w(dev, 0x03, 0x0012);
- reg_w(dev, 0x01, 0x0012);
- reg_w(dev, 0x05, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, 0x00, 0x0002);
+ reg_w(gspca_dev, 0x01, 0x0010);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0xee, 0x008b);
+ reg_w(gspca_dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x05, 0x0012);
retword = i2c_read(gspca_dev, 0x00) << 8; /* ID 0 */
retword |= i2c_read(gspca_dev, 0x01); /* ID 1 */
PDEBUG(D_PROBE, "probe 3wr vga 2 0x%04x", retword);
if (retword == 0x2030) {
retbyte = i2c_read(gspca_dev, 0x02); /* revision number */
PDEBUG(D_PROBE, "sensor PO2030 rev 0x%02x", retbyte);
- send_unknown(dev, SENSOR_PO2030);
+ send_unknown(gspca_dev, SENSOR_PO2030);
return retword;
}
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, 0x0a, 0x0010);
- reg_w(dev, 0xd3, 0x008b);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0x03, 0x0012);
- reg_w(dev, 0x01, 0x0012);
- reg_w(dev, 0x05, 0x0012);
- reg_w(dev, 0xd3, 0x008b);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, 0x0a, 0x0010);
+ reg_w(gspca_dev, 0xd3, 0x008b);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x05, 0x0012);
+ reg_w(gspca_dev, 0xd3, 0x008b);
retword = i2c_read(gspca_dev, 0x01);
if (retword != 0) {
PDEBUG(D_PROBE, "probe 3wr vga type 0a ? ret: %04x", retword);
/* this function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (id->idProduct == 0x301b)
+ sd->bridge = BRIDGE_ZC301;
+ else
+ sd->bridge = BRIDGE_ZC303;
+
+ /* define some sensors from the vendor/product */
+ sd->sensor = id->driver_info;
+
+ sd->sharpness = SHARPNESS_DEF;
+ sd->brightness = BRIGHTNESS_DEF;
+ sd->contrast = CONTRAST_DEF;
+ sd->autogain = AUTOGAIN_DEF;
+ sd->lightfreq = FREQ_DEF;
+ sd->quality = QUALITY_DEF;
+
+ return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
int sensor;
static const u8 gamma[SENSOR_MAX] = {
- 4, /* SENSOR_ADCM2700 0 */
- 4, /* SENSOR_CS2102 1 */
- 5, /* SENSOR_CS2102K 2 */
- 4, /* SENSOR_GC0305 3 */
- 4, /* SENSOR_HDCS2020b 4 */
- 4, /* SENSOR_HV7131B 5 */
- 4, /* SENSOR_HV7131C 6 */
- 4, /* SENSOR_ICM105A 7 */
- 4, /* SENSOR_MC501CB 8 */
- 4, /* SENSOR_MI0360SOC 9 */
- 3, /* SENSOR_OV7620 10 */
- 4, /* SENSOR_OV7630C 11 */
- 4, /* SENSOR_PAS106 12 */
- 4, /* SENSOR_PAS202B 13 */
- 4, /* SENSOR_PB0330 14 */
- 4, /* SENSOR_PO2030 15 */
- 4, /* SENSOR_TAS5130CK 16 */
- 3, /* SENSOR_TAS5130CXX 17 */
- 3, /* SENSOR_TAS5130C_VF0250 18 */
+ [SENSOR_ADCM2700] = 4,
+ [SENSOR_CS2102] = 4,
+ [SENSOR_CS2102K] = 5,
+ [SENSOR_GC0305] = 4,
+ [SENSOR_HDCS2020b] = 4,
+ [SENSOR_HV7131B] = 4,
+ [SENSOR_HV7131R] = 4,
+ [SENSOR_ICM105A] = 4,
+ [SENSOR_MC501CB] = 4,
+ [SENSOR_MT9V111_1] = 4,
+ [SENSOR_MT9V111_3] = 4,
+ [SENSOR_OV7620] = 3,
+ [SENSOR_OV7630C] = 4,
+ [SENSOR_PAS106] = 4,
+ [SENSOR_PAS202B] = 4,
+ [SENSOR_PB0330] = 4,
+ [SENSOR_PO2030] = 4,
+ [SENSOR_TAS5130C] = 3,
+ [SENSOR_TAS5130C_VF0250] = 3,
};
static const u8 mode_tb[SENSOR_MAX] = {
- 2, /* SENSOR_ADCM2700 0 */
- 1, /* SENSOR_CS2102 1 */
- 1, /* SENSOR_CS2102K 2 */
- 1, /* SENSOR_GC0305 3 */
- 1, /* SENSOR_HDCS2020b 4 */
- 1, /* SENSOR_HV7131B 5 */
- 1, /* SENSOR_HV7131C 6 */
- 1, /* SENSOR_ICM105A 7 */
- 2, /* SENSOR_MC501CB 8 */
- 1, /* SENSOR_MI0360SOC 9 */
- 2, /* SENSOR_OV7620 10 */
- 1, /* SENSOR_OV7630C 11 */
- 0, /* SENSOR_PAS106 12 */
- 1, /* SENSOR_PAS202B 13 */
- 1, /* SENSOR_PB0330 14 */
- 1, /* SENSOR_PO2030 15 */
- 1, /* SENSOR_TAS5130CK 16 */
- 1, /* SENSOR_TAS5130CXX 17 */
- 1, /* SENSOR_TAS5130C_VF0250 18 */
+ [SENSOR_ADCM2700] = 2,
+ [SENSOR_CS2102] = 1,
+ [SENSOR_CS2102K] = 1,
+ [SENSOR_GC0305] = 1,
+ [SENSOR_HDCS2020b] = 1,
+ [SENSOR_HV7131B] = 1,
+ [SENSOR_HV7131R] = 1,
+ [SENSOR_ICM105A] = 1,
+ [SENSOR_MC501CB] = 2,
+ [SENSOR_MT9V111_1] = 1,
+ [SENSOR_MT9V111_3] = 1,
+ [SENSOR_OV7620] = 2,
+ [SENSOR_OV7630C] = 1,
+ [SENSOR_PAS106] = 0,
+ [SENSOR_PAS202B] = 1,
+ [SENSOR_PB0330] = 1,
+ [SENSOR_PO2030] = 1,
+ [SENSOR_TAS5130C] = 1,
+ [SENSOR_TAS5130C_VF0250] = 1,
};
- /* define some sensors from the vendor/product */
- sd->sharpness = SHARPNESS_DEF;
- sd->sensor = id->driver_info;
sensor = zcxx_probeSensor(gspca_dev);
if (sensor >= 0)
PDEBUG(D_PROBE, "probe sensor -> %04x", sensor);
break;
default:
PDEBUG(D_PROBE,
- "Sensor UNKNOWN_0 force Tas5130");
- sd->sensor = SENSOR_TAS5130CXX;
+ "Unknown sensor - set to TAS5130C");
+ sd->sensor = SENSOR_TAS5130C;
}
break;
case 0:
break;
default:
/* case 2: * hv7131r */
- PDEBUG(D_PROBE, "Find Sensor HV7131R(c)");
- sd->sensor = SENSOR_HV7131C;
+ PDEBUG(D_PROBE, "Find Sensor HV7131R");
+ sd->sensor = SENSOR_HV7131R;
break;
}
break;
case 0x02:
PDEBUG(D_PROBE, "Sensor TAS5130C");
- sd->sensor = SENSOR_TAS5130CXX;
+ sd->sensor = SENSOR_TAS5130C;
break;
case 0x04:
PDEBUG(D_PROBE, "Find Sensor CS2102");
case 0x10:
case 0x12:
PDEBUG(D_PROBE, "Find Sensor TAS5130C");
- sd->sensor = SENSOR_TAS5130CXX;
+ sd->sensor = SENSOR_TAS5130C;
break;
case 0x11:
- PDEBUG(D_PROBE, "Find Sensor HV7131R(c)");
- sd->sensor = SENSOR_HV7131C;
+ PDEBUG(D_PROBE, "Find Sensor HV7131R");
+ sd->sensor = SENSOR_HV7131R;
break;
case 0x13:
+ case 0x15:
PDEBUG(D_PROBE,
- "Find Sensor MI0360SOC. Chip revision %x",
+ "Sensor MT9V111. Chip revision %04x",
sd->chip_revision);
- sd->sensor = SENSOR_MI0360SOC;
+ sd->sensor = sd->bridge == BRIDGE_ZC301
+ ? SENSOR_MT9V111_1
+ : SENSOR_MT9V111_3;
break;
case 0x14:
PDEBUG(D_PROBE,
sd->chip_revision);
sd->sensor = SENSOR_CS2102K;
break;
- case 0x15:
- PDEBUG(D_PROBE,
- "Find Sensor TAS5130CK?. Chip revision %x",
- sd->chip_revision);
- sd->sensor = SENSOR_TAS5130CK;
- break;
case 0x16:
PDEBUG(D_PROBE, "Find Sensor ADCM2700");
sd->sensor = SENSOR_ADCM2700;
}
if (sensor < 0x20) {
if (sensor == -1 || sensor == 0x10 || sensor == 0x12)
- reg_w(gspca_dev->dev, 0x02, 0x0010);
+ reg_w(gspca_dev, 0x02, 0x0010);
reg_r(gspca_dev, 0x0010);
}
cam = &gspca_dev->cam;
-/*fixme:test*/
- gspca_dev->nbalt--;
switch (mode_tb[sd->sensor]) {
case 0:
cam->cam_mode = sif_mode;
cam->nmodes = ARRAY_SIZE(broken_vga_mode);
break;
}
- sd->brightness = BRIGHTNESS_DEF;
- sd->contrast = CONTRAST_DEF;
sd->gamma = gamma[sd->sensor];
- sd->autogain = AUTOGAIN_DEF;
- sd->lightfreq = FREQ_DEF;
- sd->quality = QUALITY_DEF;
switch (sd->sensor) {
- case SENSOR_HV7131B:
- case SENSOR_HV7131C:
case SENSOR_OV7630C:
gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
break;
}
- return 0;
-}
-
-/* this function is called at probe and resume time */
-static int sd_init(struct gspca_dev *gspca_dev)
-{
/* switch off the led */
- reg_w(gspca_dev->dev, 0x01, 0x0000);
- return 0;
+ reg_w(gspca_dev, 0x01, 0x0000);
+ return gspca_dev->usb_err;
}
static int sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
int mode;
static const struct usb_action *init_tb[SENSOR_MAX][2] = {
- {adcm2700_Initial, adcm2700_InitialScale}, /* 0 */
- {cs2102_Initial, cs2102_InitialScale}, /* 1 */
- {cs2102K_Initial, cs2102K_InitialScale}, /* 2 */
- {gc0305_Initial, gc0305_InitialScale}, /* 3 */
- {hdcs2020b_Initial, hdcs2020b_InitialScale}, /* 4 */
- {hv7131b_Initial, hv7131b_InitialScale}, /* 5 */
- {hv7131r_Initial, hv7131r_InitialScale}, /* 6 */
- {icm105a_Initial, icm105a_InitialScale}, /* 7 */
- {mc501cb_Initial, mc501cb_InitialScale}, /* 8 */
- {mi0360soc_Initial, mi0360soc_InitialScale}, /* 9 */
- {ov7620_Initial, ov7620_InitialScale}, /* 10 */
- {ov7630c_Initial, ov7630c_InitialScale}, /* 11 */
- {pas106b_Initial, pas106b_InitialScale}, /* 12 */
- {pas202b_Initial, pas202b_InitialScale}, /* 13 */
- {pb0330_Initial, pb0330_InitialScale}, /* 14 */
- {po2030_Initial, po2030_InitialScale}, /* 15 */
- {tas5130cK_Initial, tas5130cK_InitialScale}, /* 16 */
- {tas5130cxx_Initial, tas5130cxx_InitialScale}, /* 17 */
+ [SENSOR_ADCM2700] =
+ {adcm2700_Initial, adcm2700_InitialScale},
+ [SENSOR_CS2102] =
+ {cs2102_Initial, cs2102_InitialScale},
+ [SENSOR_CS2102K] =
+ {cs2102K_Initial, cs2102K_InitialScale},
+ [SENSOR_GC0305] =
+ {gc0305_Initial, gc0305_InitialScale},
+ [SENSOR_HDCS2020b] =
+ {hdcs2020b_Initial, hdcs2020b_InitialScale},
+ [SENSOR_HV7131B] =
+ {hv7131b_Initial, hv7131b_InitialScale},
+ [SENSOR_HV7131R] =
+ {hv7131r_Initial, hv7131r_InitialScale},
+ [SENSOR_ICM105A] =
+ {icm105a_Initial, icm105a_InitialScale},
+ [SENSOR_MC501CB] =
+ {mc501cb_Initial, mc501cb_InitialScale},
+ [SENSOR_MT9V111_1] =
+ {mt9v111_1_Initial, mt9v111_1_InitialScale},
+ [SENSOR_MT9V111_3] =
+ {mt9v111_3_Initial, mt9v111_3_InitialScale},
+ [SENSOR_OV7620] =
+ {ov7620_Initial, ov7620_InitialScale},
+ [SENSOR_OV7630C] =
+ {ov7630c_Initial, ov7630c_InitialScale},
+ [SENSOR_PAS106] =
+ {pas106b_Initial, pas106b_InitialScale},
+ [SENSOR_PAS202B] =
+ {pas202b_Initial, pas202b_InitialScale},
+ [SENSOR_PB0330] =
+ {pb0330_Initial, pb0330_InitialScale},
+ [SENSOR_PO2030] =
+ {po2030_Initial, po2030_InitialScale},
+ [SENSOR_TAS5130C] =
+ {tas5130c_Initial, tas5130c_InitialScale},
+ [SENSOR_TAS5130C_VF0250] =
{tas5130c_vf0250_Initial, tas5130c_vf0250_InitialScale},
- /* 18 */
};
/* create the JPEG header */
mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
switch (sd->sensor) {
- case SENSOR_HV7131C:
+ case SENSOR_HV7131R:
zcxx_probeSensor(gspca_dev);
break;
case SENSOR_PAS106:
case SENSOR_GC0305:
case SENSOR_OV7620:
case SENSOR_PO2030:
- case SENSOR_TAS5130CXX:
+ case SENSOR_TAS5130C:
case SENSOR_TAS5130C_VF0250:
/* msleep(100); * ?? */
reg_r(gspca_dev, 0x0002); /* --> 0x40 */
- reg_w(dev, 0x09, 0x01ad); /* (from win traces) */
- reg_w(dev, 0x15, 0x01ae);
- if (sd->sensor == SENSOR_TAS5130CXX)
+ reg_w(gspca_dev, 0x09, 0x01ad); /* (from win traces) */
+ reg_w(gspca_dev, 0x15, 0x01ae);
+ if (sd->sensor == SENSOR_TAS5130C)
break;
- reg_w(dev, 0x0d, 0x003a);
- reg_w(dev, 0x02, 0x003b);
- reg_w(dev, 0x00, 0x0038);
+ reg_w(gspca_dev, 0x0d, 0x003a);
+ reg_w(gspca_dev, 0x02, 0x003b);
+ reg_w(gspca_dev, 0x00, 0x0038);
break;
case SENSOR_PAS202B:
- reg_w(dev, 0x03, 0x003b);
- reg_w(dev, 0x0c, 0x003a);
- reg_w(dev, 0x0b, 0x0039);
+ reg_w(gspca_dev, 0x03, 0x003b);
+ reg_w(gspca_dev, 0x0c, 0x003a);
+ reg_w(gspca_dev, 0x0b, 0x0039);
break;
}
case SENSOR_ADCM2700:
case SENSOR_OV7620:
reg_r(gspca_dev, 0x0008);
- reg_w(dev, 0x00, 0x0008);
+ reg_w(gspca_dev, 0x00, 0x0008);
break;
case SENSOR_PAS202B:
case SENSOR_GC0305:
- case SENSOR_TAS5130CXX:
+ case SENSOR_TAS5130C:
reg_r(gspca_dev, 0x0008);
/* fall thru */
case SENSOR_PO2030:
- reg_w(dev, 0x03, 0x0008);
+ reg_w(gspca_dev, 0x03, 0x0008);
break;
}
setsharpness(gspca_dev);
case SENSOR_CS2102K: /* gamma set in xxx_Initial */
case SENSOR_HDCS2020b:
case SENSOR_OV7630C:
- case SENSOR_TAS5130CK:
break;
default:
setcontrast(gspca_dev);
case SENSOR_OV7620:
case SENSOR_PAS202B:
reg_r(gspca_dev, 0x0180); /* from win */
- reg_w(dev, 0x00, 0x0180);
+ reg_w(gspca_dev, 0x00, 0x0180);
break;
default:
setquality(gspca_dev);
switch (sd->sensor) {
case SENSOR_ADCM2700:
- reg_w(dev, 0x09, 0x01ad); /* (from win traces) */
- reg_w(dev, 0x15, 0x01ae);
- reg_w(dev, 0x02, 0x0180);
+ reg_w(gspca_dev, 0x09, 0x01ad); /* (from win traces) */
+ reg_w(gspca_dev, 0x15, 0x01ae);
+ reg_w(gspca_dev, 0x02, 0x0180);
/* ms-win + */
- reg_w(dev, 0x40, 0x0117);
+ reg_w(gspca_dev, 0x40, 0x0117);
break;
case SENSOR_GC0305:
- case SENSOR_TAS5130CXX:
- reg_w(dev, 0x09, 0x01ad); /* (from win traces) */
- reg_w(dev, 0x15, 0x01ae);
+ case SENSOR_TAS5130C:
+ reg_w(gspca_dev, 0x09, 0x01ad); /* (from win traces) */
+ reg_w(gspca_dev, 0x15, 0x01ae);
/* fall thru */
case SENSOR_PAS202B:
case SENSOR_PO2030:
-/* reg_w(dev, 0x40, ZC3XX_R117_GGAIN); * (from win traces) */
+/* reg_w(gspca_dev, 0x40, ZC3XX_R117_GGAIN); * (from win traces) */
reg_r(gspca_dev, 0x0180);
break;
case SENSOR_OV7620:
- reg_w(dev, 0x09, 0x01ad);
- reg_w(dev, 0x15, 0x01ae);
+ reg_w(gspca_dev, 0x09, 0x01ad);
+ reg_w(gspca_dev, 0x15, 0x01ae);
i2c_read(gspca_dev, 0x13); /*fixme: returns 0xa3 */
i2c_write(gspca_dev, 0x13, 0xa3, 0x00);
/*fixme: returned value to send? */
- reg_w(dev, 0x40, 0x0117);
+ reg_w(gspca_dev, 0x40, 0x0117);
reg_r(gspca_dev, 0x0180);
break;
}
switch (sd->sensor) {
case SENSOR_PO2030:
msleep(50);
- reg_w(dev, 0x00, 0x0007); /* (from win traces) */
- reg_w(dev, 0x02, ZC3XX_R008_CLOCKSETTING);
+ reg_w(gspca_dev, 0x00, 0x0007); /* (from win traces) */
+ reg_w(gspca_dev, 0x02, ZC3XX_R008_CLOCKSETTING);
break;
}
- return 0;
+ return gspca_dev->usb_err;
}
/* called on streamoff with alt 0 and on disconnect */
if (!gspca_dev->present)
return;
- send_unknown(gspca_dev->dev, sd->sensor);
+ send_unknown(gspca_dev, sd->sensor);
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
sd->brightness = val;
if (gspca_dev->streaming)
setcontrast(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
sd->contrast = val;
if (gspca_dev->streaming)
setcontrast(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
sd->autogain = val;
if (gspca_dev->streaming)
setautogain(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
sd->gamma = val;
if (gspca_dev->streaming)
setcontrast(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getgamma(struct gspca_dev *gspca_dev, __s32 *val)
sd->lightfreq = val;
if (gspca_dev->streaming)
setlightfreq(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
sd->sharpness = val;
if (gspca_dev->streaming)
setsharpness(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
sd->quality = jcomp->quality;
if (gspca_dev->streaming)
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_get_jcomp(struct gspca_dev *gspca_dev,
{USB_DEVICE(0x10fd, 0x8050)},
{} /* end of entry */
};
-#undef DVNAME
MODULE_DEVICE_TABLE(usb, device_table);
/* -- device connect -- */
depends on VIDEO_V4L2 && PCI && I2C
depends on INPUT # due to VIDEO_IR
select I2C_ALGOBIT
- select VIDEO_IR
+ depends on VIDEO_IR
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/kernel.h>
-#include <linux/slab.h>
#include "ivtv-driver.h"
-#include "ivtv-cards.h"
#include "ivtv-ioctl.h"
-#include "ivtv-routing.h"
-#include "ivtv-i2c.h"
-#include "ivtv-mailbox.h"
#include "ivtv-controls.h"
-/* Must be sorted from low to high control ID! */
-static const u32 user_ctrls[] = {
- V4L2_CID_USER_CLASS,
- V4L2_CID_BRIGHTNESS,
- V4L2_CID_CONTRAST,
- V4L2_CID_SATURATION,
- V4L2_CID_HUE,
- V4L2_CID_AUDIO_VOLUME,
- V4L2_CID_AUDIO_BALANCE,
- V4L2_CID_AUDIO_BASS,
- V4L2_CID_AUDIO_TREBLE,
- V4L2_CID_AUDIO_MUTE,
- V4L2_CID_AUDIO_LOUDNESS,
- 0
-};
-
-static const u32 *ctrl_classes[] = {
- user_ctrls,
- cx2341x_mpeg_ctrls,
- NULL
-};
-
-
-int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl)
-{
- struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
- const char *name;
-
- qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id);
- if (qctrl->id == 0)
- return -EINVAL;
-
- switch (qctrl->id) {
- /* Standard V4L2 controls */
- case V4L2_CID_USER_CLASS:
- return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
- case V4L2_CID_BRIGHTNESS:
- case V4L2_CID_HUE:
- case V4L2_CID_SATURATION:
- case V4L2_CID_CONTRAST:
- if (v4l2_subdev_call(itv->sd_video, core, queryctrl, qctrl))
- qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
- return 0;
-
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_LOUDNESS:
- if (v4l2_subdev_call(itv->sd_audio, core, queryctrl, qctrl))
- qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
- return 0;
-
- default:
- if (cx2341x_ctrl_query(&itv->params, qctrl))
- qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
- return 0;
- }
- strncpy(qctrl->name, name, sizeof(qctrl->name) - 1);
- qctrl->name[sizeof(qctrl->name) - 1] = 0;
- return 0;
-}
-
-int ivtv_querymenu(struct file *file, void *fh, struct v4l2_querymenu *qmenu)
-{
- struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
- struct v4l2_queryctrl qctrl;
-
- qctrl.id = qmenu->id;
- ivtv_queryctrl(file, fh, &qctrl);
- return v4l2_ctrl_query_menu(qmenu, &qctrl,
- cx2341x_ctrl_get_menu(&itv->params, qmenu->id));
-}
-
-static int ivtv_try_ctrl(struct file *file, void *fh,
- struct v4l2_ext_control *vctrl)
-{
- struct v4l2_queryctrl qctrl;
- const char **menu_items = NULL;
- int err;
-
- qctrl.id = vctrl->id;
- err = ivtv_queryctrl(file, fh, &qctrl);
- if (err)
- return err;
- if (qctrl.type == V4L2_CTRL_TYPE_MENU)
- menu_items = v4l2_ctrl_get_menu(qctrl.id);
- return v4l2_ctrl_check(vctrl, &qctrl, menu_items);
-}
-
-static int ivtv_s_ctrl(struct ivtv *itv, struct v4l2_control *vctrl)
-{
- switch (vctrl->id) {
- /* Standard V4L2 controls */
- case V4L2_CID_BRIGHTNESS:
- case V4L2_CID_HUE:
- case V4L2_CID_SATURATION:
- case V4L2_CID_CONTRAST:
- return v4l2_subdev_call(itv->sd_video, core, s_ctrl, vctrl);
-
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_LOUDNESS:
- return v4l2_subdev_call(itv->sd_audio, core, s_ctrl, vctrl);
-
- default:
- IVTV_DEBUG_IOCTL("invalid control 0x%x\n", vctrl->id);
- return -EINVAL;
- }
- return 0;
-}
-
-static int ivtv_g_ctrl(struct ivtv *itv, struct v4l2_control *vctrl)
+static int ivtv_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt)
{
- switch (vctrl->id) {
- /* Standard V4L2 controls */
- case V4L2_CID_BRIGHTNESS:
- case V4L2_CID_HUE:
- case V4L2_CID_SATURATION:
- case V4L2_CID_CONTRAST:
- return v4l2_subdev_call(itv->sd_video, core, g_ctrl, vctrl);
-
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_LOUDNESS:
- return v4l2_subdev_call(itv->sd_audio, core, g_ctrl, vctrl);
- default:
- IVTV_DEBUG_IOCTL("invalid control 0x%x\n", vctrl->id);
- return -EINVAL;
- }
- return 0;
-}
-
-static int ivtv_setup_vbi_fmt(struct ivtv *itv, enum v4l2_mpeg_stream_vbi_fmt fmt)
-{
- if (!(itv->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE))
- return -EINVAL;
- if (atomic_read(&itv->capturing) > 0)
- return -EBUSY;
+ struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
/* First try to allocate sliced VBI buffers if needed. */
if (fmt && itv->vbi.sliced_mpeg_data[0] == NULL) {
return 0;
}
-int ivtv_g_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
+static int ivtv_s_video_encoding(struct cx2341x_handler *cxhdl, u32 val)
{
- struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
- struct v4l2_control ctrl;
-
- if (c->ctrl_class == V4L2_CTRL_CLASS_USER) {
- int i;
- int err = 0;
-
- for (i = 0; i < c->count; i++) {
- ctrl.id = c->controls[i].id;
- ctrl.value = c->controls[i].value;
- err = ivtv_g_ctrl(itv, &ctrl);
- c->controls[i].value = ctrl.value;
- if (err) {
- c->error_idx = i;
- break;
- }
- }
- return err;
- }
- if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
- return cx2341x_ext_ctrls(&itv->params, 0, c, VIDIOC_G_EXT_CTRLS);
- return -EINVAL;
+ struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
+ int is_mpeg1 = val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
+ struct v4l2_mbus_framefmt fmt;
+
+ /* fix videodecoder resolution */
+ fmt.width = cxhdl->width / (is_mpeg1 ? 2 : 1);
+ fmt.height = cxhdl->height;
+ fmt.code = V4L2_MBUS_FMT_FIXED;
+ v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &fmt);
+ return 0;
}
-int ivtv_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
+static int ivtv_s_audio_sampling_freq(struct cx2341x_handler *cxhdl, u32 idx)
{
- struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
- struct v4l2_control ctrl;
-
- if (c->ctrl_class == V4L2_CTRL_CLASS_USER) {
- int i;
- int err = 0;
-
- for (i = 0; i < c->count; i++) {
- ctrl.id = c->controls[i].id;
- ctrl.value = c->controls[i].value;
- err = ivtv_s_ctrl(itv, &ctrl);
- c->controls[i].value = ctrl.value;
- if (err) {
- c->error_idx = i;
- break;
- }
- }
- return err;
- }
- if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) {
- static u32 freqs[3] = { 44100, 48000, 32000 };
- struct cx2341x_mpeg_params p = itv->params;
- int err = cx2341x_ext_ctrls(&p, atomic_read(&itv->capturing), c, VIDIOC_S_EXT_CTRLS);
- unsigned idx;
-
- if (err)
- return err;
+ static const u32 freqs[3] = { 44100, 48000, 32000 };
+ struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
- if (p.video_encoding != itv->params.video_encoding) {
- int is_mpeg1 = p.video_encoding ==
- V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
- struct v4l2_mbus_framefmt fmt;
-
- /* fix videodecoder resolution */
- fmt.width = itv->params.width / (is_mpeg1 ? 2 : 1);
- fmt.height = itv->params.height;
- fmt.code = V4L2_MBUS_FMT_FIXED;
- v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &fmt);
- }
- err = cx2341x_update(itv, ivtv_api_func, &itv->params, &p);
- if (!err && itv->params.stream_vbi_fmt != p.stream_vbi_fmt)
- err = ivtv_setup_vbi_fmt(itv, p.stream_vbi_fmt);
- itv->params = p;
- itv->dualwatch_stereo_mode = p.audio_properties & 0x0300;
- idx = p.audio_properties & 0x03;
- /* The audio clock of the digitizer must match the codec sample
- rate otherwise you get some very strange effects. */
- if (idx < ARRAY_SIZE(freqs))
- ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]);
- return err;
- }
- return -EINVAL;
+ /* The audio clock of the digitizer must match the codec sample
+ rate otherwise you get some very strange effects. */
+ if (idx < ARRAY_SIZE(freqs))
+ ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]);
+ return 0;
}
-int ivtv_try_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
+static int ivtv_s_audio_mode(struct cx2341x_handler *cxhdl, u32 val)
{
- struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
+ struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
- if (c->ctrl_class == V4L2_CTRL_CLASS_USER) {
- int i;
- int err = 0;
-
- for (i = 0; i < c->count; i++) {
- err = ivtv_try_ctrl(file, fh, &c->controls[i]);
- if (err) {
- c->error_idx = i;
- break;
- }
- }
- return err;
- }
- if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
- return cx2341x_ext_ctrls(&itv->params, atomic_read(&itv->capturing), c, VIDIOC_TRY_EXT_CTRLS);
- return -EINVAL;
+ itv->dualwatch_stereo_mode = val;
+ return 0;
}
+
+struct cx2341x_handler_ops ivtv_cxhdl_ops = {
+ .s_audio_mode = ivtv_s_audio_mode,
+ .s_audio_sampling_freq = ivtv_s_audio_sampling_freq,
+ .s_video_encoding = ivtv_s_video_encoding,
+ .s_stream_vbi_fmt = ivtv_s_stream_vbi_fmt,
+};
#ifndef IVTV_CONTROLS_H
#define IVTV_CONTROLS_H
-int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *a);
-int ivtv_g_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *a);
-int ivtv_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *a);
-int ivtv_try_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *a);
-int ivtv_querymenu(struct file *file, void *fh, struct v4l2_querymenu *a);
+extern struct cx2341x_handler_ops ivtv_cxhdl_ops;
#endif
#include "ivtv-cards.h"
#include "ivtv-vbi.h"
#include "ivtv-routing.h"
+#include "ivtv-controls.h"
#include "ivtv-gpio.h"
#include <media/tveeprom.h>
itv->open_id = 1;
/* Initial settings */
- cx2341x_fill_defaults(&itv->params);
- itv->params.port = CX2341X_PORT_MEMORY;
- itv->params.capabilities = CX2341X_CAP_HAS_SLICED_VBI;
+ itv->cxhdl.port = CX2341X_PORT_MEMORY;
+ itv->cxhdl.capabilities = CX2341X_CAP_HAS_SLICED_VBI;
init_waitqueue_head(&itv->eos_waitq);
init_waitqueue_head(&itv->event_waitq);
init_waitqueue_head(&itv->vsync_waitq);
retval = -ENOMEM;
goto err;
}
+ retval = cx2341x_handler_init(&itv->cxhdl, 50);
+ if (retval)
+ goto err;
+ itv->v4l2_dev.ctrl_handler = &itv->cxhdl.hdl;
+ itv->cxhdl.ops = &ivtv_cxhdl_ops;
+ itv->cxhdl.priv = itv;
+ itv->cxhdl.func = ivtv_api_func;
IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
itv->yuv_info.v4l2_src_w = itv->yuv_info.osd_full_w;
itv->yuv_info.v4l2_src_h = itv->yuv_info.osd_full_h;
- itv->params.video_gop_size = itv->is_60hz ? 15 : 12;
+ cx2341x_handler_set_50hz(&itv->cxhdl, itv->is_50hz);
itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_MPG] = 0x08000;
itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_PCM] = 0x01200;
IVTV_DEBUG_INFO("Getting firmware version..\n");
ivtv_firmware_versions(itv);
- if (itv->card->hw_all & IVTV_HW_CX25840) {
- struct v4l2_control ctrl;
-
+ if (itv->card->hw_all & IVTV_HW_CX25840)
v4l2_subdev_call(itv->sd_video, core, load_fw);
- /* CX25840_CID_ENABLE_PVR150_WORKAROUND */
- ctrl.id = V4L2_CID_PRIVATE_BASE;
- ctrl.value = itv->pvr150_workaround;
- v4l2_subdev_call(itv->sd_video, core, s_ctrl, &ctrl);
- }
vf.tuner = 0;
vf.type = V4L2_TUNER_ANALOG_TV;
/* For cards with video out, this call needs interrupts enabled */
ivtv_s_std(NULL, &fh, &itv->tuner_std);
+ /* Setup initial controls */
+ cx2341x_handler_setup(&itv->cxhdl);
return 0;
}
#include <linux/dvb/audio.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fh.h>
#include <media/tuner.h>
struct ivtv_options options; /* user options */
struct v4l2_device v4l2_dev;
+ struct cx2341x_handler cxhdl;
+ struct v4l2_ctrl_handler hdl_gpio;
struct v4l2_subdev sd_gpio; /* GPIO sub-device */
u16 instance;
v4l2_std_id std_out; /* current TV output standard */
u8 audio_stereo_mode; /* decoder setting how to handle stereo MPEG audio */
u8 audio_bilingual_mode; /* decoder setting how to handle bilingual MPEG audio */
- struct cx2341x_mpeg_params params; /* current encoder parameters */
/* Locking */
static void ivtv_dualwatch(struct ivtv *itv)
{
struct v4l2_tuner vt;
- u32 new_bitmap;
u32 new_stereo_mode;
- const u32 stereo_mask = 0x0300;
- const u32 dual = 0x0200;
+ const u32 dual = 0x02;
- new_stereo_mode = itv->params.audio_properties & stereo_mask;
+ new_stereo_mode = v4l2_ctrl_g_ctrl(itv->cxhdl.audio_mode);
memset(&vt, 0, sizeof(vt));
ivtv_call_all(itv, tuner, g_tuner, &vt);
if (vt.audmode == V4L2_TUNER_MODE_LANG1_LANG2 && (vt.rxsubchans & V4L2_TUNER_SUB_LANG2))
if (new_stereo_mode == itv->dualwatch_stereo_mode)
return;
- new_bitmap = new_stereo_mode | (itv->params.audio_properties & ~stereo_mask);
-
- IVTV_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x. new audio_bitmask=0x%ux\n",
- itv->dualwatch_stereo_mode, new_stereo_mode, new_bitmap);
-
- if (ivtv_vapi(itv, CX2341X_ENC_SET_AUDIO_PROPERTIES, 1, new_bitmap) == 0) {
- itv->dualwatch_stereo_mode = new_stereo_mode;
- return;
- }
- IVTV_DEBUG_INFO("dualwatch: changing stereo flag failed\n");
+ IVTV_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x.\n",
+ itv->dualwatch_stereo_mode, new_stereo_mode);
+ if (v4l2_ctrl_s_ctrl(itv->cxhdl.audio_mode, new_stereo_mode))
+ IVTV_DEBUG_INFO("dualwatch: changing stereo flag failed\n");
}
static void ivtv_update_pgm_info(struct ivtv *itv)
if (atomic_read(&itv->capturing) > 0) {
/* Undo video mute */
ivtv_vapi(itv, CX2341X_ENC_MUTE_VIDEO, 1,
- itv->params.video_mute | (itv->params.video_mute_yuv << 8));
+ v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute) |
+ (v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute_yuv) << 8));
}
/* Done! Unmute and continue. */
ivtv_unmute(itv);
volatile u8 __iomem *mem_offset;
data[0] = 0;
- data[1] = itv->params.width; /* YUV source width */
- data[2] = itv->params.height;
- data[3] = itv->params.audio_properties; /* Audio settings to use,
+ data[1] = itv->cxhdl.width; /* YUV source width */
+ data[2] = itv->cxhdl.height;
+ data[3] = itv->cxhdl.audio_properties; /* Audio settings to use,
bitmap. see docs. */
if (ivtv_api(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, data)) {
IVTV_ERR("ivtv_init_mpeg_decoder failed to set decoder source\n");
#include "ivtv-gpio.h"
#include "tuner-xc2028.h"
#include <media/tuner.h>
+#include <media/v4l2-ctrls.h>
/*
* GPIO assignment of Yuan MPG600/MPG160
return container_of(sd, struct ivtv, sd_gpio);
}
-static struct v4l2_queryctrl gpio_ctrl_mute = {
- .id = V4L2_CID_AUDIO_MUTE,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Mute",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- .flags = 0,
-};
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct ivtv, hdl_gpio)->sd_gpio;
+}
static int subdev_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
{
return 0;
}
-static int subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int subdev_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct ivtv *itv = sd_to_ivtv(sd);
u16 mask, data;
- if (ctrl->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- mask = itv->card->gpio_audio_mute.mask;
- data = itv->card->gpio_audio_mute.mute;
- ctrl->value = (read_reg(IVTV_REG_GPIO_OUT) & mask) == data;
- return 0;
-}
-
-static int subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct ivtv *itv = sd_to_ivtv(sd);
- u16 mask, data;
-
- if (ctrl->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- mask = itv->card->gpio_audio_mute.mask;
- data = ctrl->value ? itv->card->gpio_audio_mute.mute : 0;
- if (mask)
- write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) | (data & mask), IVTV_REG_GPIO_OUT);
- return 0;
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ mask = itv->card->gpio_audio_mute.mask;
+ data = ctrl->val ? itv->card->gpio_audio_mute.mute : 0;
+ if (mask)
+ write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) |
+ (data & mask), IVTV_REG_GPIO_OUT);
+ return 0;
+ }
+ return -EINVAL;
}
-static int subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- if (qc->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- *qc = gpio_ctrl_mute;
- return 0;
-}
static int subdev_log_status(struct v4l2_subdev *sd)
{
IVTV_INFO("GPIO status: DIR=0x%04x OUT=0x%04x IN=0x%04x\n",
read_reg(IVTV_REG_GPIO_DIR), read_reg(IVTV_REG_GPIO_OUT),
read_reg(IVTV_REG_GPIO_IN));
+ v4l2_ctrl_handler_log_status(&itv->hdl_gpio, sd->name);
return 0;
}
return 0;
}
+static const struct v4l2_ctrl_ops gpio_ctrl_ops = {
+ .s_ctrl = subdev_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops subdev_core_ops = {
.log_status = subdev_log_status,
- .g_ctrl = subdev_g_ctrl,
- .s_ctrl = subdev_s_ctrl,
- .queryctrl = subdev_queryctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
};
static const struct v4l2_subdev_tuner_ops subdev_tuner_ops = {
v4l2_subdev_init(&itv->sd_gpio, &subdev_ops);
snprintf(itv->sd_gpio.name, sizeof(itv->sd_gpio.name), "%s-gpio", itv->v4l2_dev.name);
itv->sd_gpio.grp_id = IVTV_HW_GPIO;
+ v4l2_ctrl_handler_init(&itv->hdl_gpio, 1);
+ v4l2_ctrl_new_std(&itv->hdl_gpio, &gpio_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ if (itv->hdl_gpio.error)
+ return itv->hdl_gpio.error;
+ itv->sd_gpio.ctrl_handler = &itv->hdl_gpio;
+ v4l2_ctrl_handler_setup(&itv->hdl_gpio);
return v4l2_device_register_subdev(&itv->v4l2_dev, &itv->sd_gpio);
}
#include "ivtv-cards.h"
#include "ivtv-gpio.h"
#include "ivtv-i2c.h"
+#include <media/cx25840.h>
/* i2c implementation for cx23415/6 chip, ivtv project.
* Author: Kevin Thayer (nufan_wfk at yahoo.com)
return -1;
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, type, I2C_NAME_SIZE);
- return i2c_new_probed_device(adap, &info, addr_list) == NULL
- ? -1 : 0;
+ return i2c_new_probed_device(adap, &info, addr_list, NULL)
+ == NULL ? -1 : 0;
}
/* Only allow one IR receiver to be registered per board */
info.platform_data = init_data;
strlcpy(info.type, type, I2C_NAME_SIZE);
- return i2c_new_probed_device(adap, &info, addr_list) == NULL ? -1 : 0;
+ return i2c_new_probed_device(adap, &info, addr_list, NULL) == NULL ?
+ -1 : 0;
}
/* Instantiate the IR receiver device using probing -- undesirable */
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
- return i2c_new_probed_device(&itv->i2c_adap, &info, addr_list);
+ return i2c_new_probed_device(&itv->i2c_adap, &info, addr_list, NULL);
}
int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
adap, mod, type, 0, I2C_ADDRS(hw_addrs[idx]));
+ } else if (hw == IVTV_HW_CX25840) {
+ struct cx25840_platform_data pdata;
+
+ pdata.pvr150_workaround = itv->pvr150_workaround;
+ sd = v4l2_i2c_new_subdev_cfg(&itv->v4l2_dev,
+ adap, mod, type, 0, &pdata, hw_addrs[idx], NULL);
} else {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
adap, mod, type, hw_addrs[idx], NULL);
data[0] |= (speed > 1000 || speed < -1500) ? 0x40000000 : 0;
data[1] = (speed < 0);
data[2] = speed < 0 ? 3 : 7;
- data[3] = itv->params.video_b_frames;
+ data[3] = v4l2_ctrl_g_ctrl(itv->cxhdl.video_b_frames);
data[4] = (speed == 1500 || speed == 500) ? itv->speed_mute_audio : 0;
data[5] = 0;
data[6] = 0;
struct ivtv *itv = id->itv;
struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
- pixfmt->width = itv->params.width;
- pixfmt->height = itv->params.height;
+ pixfmt->width = itv->cxhdl.width;
+ pixfmt->height = itv->cxhdl.height;
pixfmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
pixfmt->field = V4L2_FIELD_INTERLACED;
pixfmt->priv = 0;
{
struct ivtv_open_id *id = fh;
struct ivtv *itv = id->itv;
- struct cx2341x_mpeg_params *p = &itv->params;
struct v4l2_mbus_framefmt mbus_fmt;
int ret = ivtv_try_fmt_vid_cap(file, fh, fmt);
int w = fmt->fmt.pix.width;
if (ret)
return ret;
- if (p->width == w && p->height == h)
+ if (itv->cxhdl.width == w && itv->cxhdl.height == h)
return 0;
if (atomic_read(&itv->capturing) > 0)
return -EBUSY;
- p->width = w;
- p->height = h;
- if (p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
+ itv->cxhdl.width = w;
+ itv->cxhdl.height = h;
+ if (v4l2_ctrl_g_ctrl(itv->cxhdl.video_encoding) == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
fmt->fmt.pix.width /= 2;
mbus_fmt.width = fmt->fmt.pix.width;
mbus_fmt.height = h;
itv->std = *std;
itv->is_60hz = (*std & V4L2_STD_525_60) ? 1 : 0;
- itv->params.is_50hz = itv->is_50hz = !itv->is_60hz;
- itv->params.width = 720;
- itv->params.height = itv->is_50hz ? 576 : 480;
+ itv->is_50hz = !itv->is_60hz;
+ cx2341x_handler_set_50hz(&itv->cxhdl, itv->is_50hz);
+ itv->cxhdl.width = 720;
+ itv->cxhdl.height = itv->is_50hz ? 576 : 480;
itv->vbi.count = itv->is_50hz ? 18 : 12;
itv->vbi.start[0] = itv->is_50hz ? 6 : 10;
itv->vbi.start[1] = itv->is_50hz ? 318 : 273;
ivtv_vapi(itv, CX2341X_DEC_SET_STANDARD, 1, itv->is_out_50hz);
itv->main_rect.left = itv->main_rect.top = 0;
itv->main_rect.width = 720;
- itv->main_rect.height = itv->params.height;
+ itv->main_rect.height = itv->cxhdl.height;
ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4,
720, itv->main_rect.height, 0, 0);
yi->main_rect = itv->main_rect;
}
IVTV_INFO("Tuner: %s\n",
test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags) ? "Radio" : "TV");
- cx2341x_log_status(&itv->params, itv->v4l2_dev.name);
+ v4l2_ctrl_handler_log_status(&itv->cxhdl.hdl, itv->v4l2_dev.name);
IVTV_INFO("Status flags: 0x%08lx\n", itv->i_flags);
for (i = 0; i < IVTV_MAX_STREAMS; i++) {
struct ivtv_stream *s = &itv->streams[i];
.vidioc_s_register = ivtv_s_register,
#endif
.vidioc_default = ivtv_default,
- .vidioc_queryctrl = ivtv_queryctrl,
- .vidioc_querymenu = ivtv_querymenu,
- .vidioc_g_ext_ctrls = ivtv_g_ext_ctrls,
- .vidioc_s_ext_ctrls = ivtv_s_ext_ctrls,
- .vidioc_try_ext_ctrls = ivtv_try_ext_ctrls,
.vidioc_subscribe_event = ivtv_subscribe_event,
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
};
s->vdev->num = num;
s->vdev->v4l2_dev = &itv->v4l2_dev;
+ s->vdev->ctrl_handler = itv->v4l2_dev.ctrl_handler;
s->vdev->fops = ivtv_stream_info[type].fops;
s->vdev->release = video_device_release;
s->vdev->tvnorms = V4L2_STD_ALL;
{
u32 data[CX2341X_MBOX_MAX_DATA];
struct ivtv *itv = s->itv;
- struct cx2341x_mpeg_params *p = &itv->params;
int captype = 0, subtype = 0;
int enable_passthrough = 0;
}
itv->mpg_data_received = itv->vbi_data_inserted = 0;
itv->dualwatch_jiffies = jiffies;
- itv->dualwatch_stereo_mode = p->audio_properties & 0x0300;
+ itv->dualwatch_stereo_mode = v4l2_ctrl_g_ctrl(itv->cxhdl.audio_mode);
itv->search_pack_header = 0;
break;
itv->pgm_info_offset, itv->pgm_info_num);
/* Setup API for Stream */
- cx2341x_update(itv, ivtv_api_func, NULL, p);
+ cx2341x_handler_setup(&itv->cxhdl);
/* mute if capturing radio */
if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags))
ivtv_vapi(itv, CX2341X_ENC_MUTE_VIDEO, 1,
- 1 | (p->video_mute_yuv << 8));
+ 1 | (v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute_yuv) << 8));
}
/* Vsync Setup */
clear_bit(IVTV_F_I_EOS, &itv->i_flags);
+ cx2341x_handler_set_busy(&itv->cxhdl, 1);
+
/* Initialize Digitizer for Capture */
/* Avoid tinny audio problem - ensure audio clocks are going */
v4l2_subdev_call(itv->sd_audio, audio, s_stream, 1);
{
u32 data[CX2341X_MBOX_MAX_DATA];
struct ivtv *itv = s->itv;
- struct cx2341x_mpeg_params *p = &itv->params;
int datatype;
u16 width;
u16 height;
IVTV_DEBUG_INFO("Setting some initial decoder settings\n");
- width = p->width;
- height = p->height;
+ width = itv->cxhdl.width;
+ height = itv->cxhdl.height;
/* set audio mode to left/stereo for dual/stereo mode. */
ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
break;
}
if (ivtv_vapi(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, datatype,
- width, height, p->audio_properties)) {
+ width, height, itv->cxhdl.audio_properties)) {
IVTV_DEBUG_WARN("Couldn't initialize decoder source\n");
}
return 0;
}
+ cx2341x_handler_set_busy(&itv->cxhdl, 0);
+
/* Set the following Interrupt mask bits for capture */
ivtv_set_irq_mask(itv, IVTV_IRQ_MASK_CAPTURE);
del_timer(&itv->dma_timer);
/* Setup capture if not already done */
if (atomic_read(&itv->capturing) == 0) {
- cx2341x_update(itv, ivtv_api_func, NULL, &itv->params);
+ cx2341x_handler_setup(&itv->cxhdl);
+ cx2341x_handler_set_busy(&itv->cxhdl, 1);
}
/* Start Passthrough Mode */
clear_bit(IVTV_F_S_PASSTHROUGH, &dec_stream->s_flags);
clear_bit(IVTV_F_S_STREAMING, &dec_stream->s_flags);
itv->output_mode = OUT_NONE;
+ if (atomic_read(&itv->capturing) == 0)
+ cx2341x_handler_set_busy(&itv->cxhdl, 0);
return 0;
}
msp_write_dem(client, 0x40, state->i2s_mode);
}
-void msp_set_audio(struct i2c_client *client)
-{
- struct msp_state *state = to_state(i2c_get_clientdata(client));
- int bal = 0, bass, treble, loudness;
- int val = 0;
- int reallymuted = state->muted | state->scan_in_progress;
-
- if (!reallymuted)
- val = (state->volume * 0x7f / 65535) << 8;
-
- v4l_dbg(1, msp_debug, client, "mute=%s scanning=%s volume=%d\n",
- state->muted ? "on" : "off",
- state->scan_in_progress ? "yes" : "no",
- state->volume);
-
- msp_write_dsp(client, 0x0000, val);
- msp_write_dsp(client, 0x0007, reallymuted ? 0x1 : (val | 0x1));
- if (state->has_scart2_out_volume)
- msp_write_dsp(client, 0x0040, reallymuted ? 0x1 : (val | 0x1));
- if (state->has_headphones)
- msp_write_dsp(client, 0x0006, val);
- if (!state->has_sound_processing)
- return;
-
- if (val)
- bal = (u8)((state->balance / 256) - 128);
- bass = ((state->bass - 32768) * 0x60 / 65535) << 8;
- treble = ((state->treble - 32768) * 0x60 / 65535) << 8;
- loudness = state->loudness ? ((5 * 4) << 8) : 0;
-
- v4l_dbg(1, msp_debug, client, "balance=%d bass=%d treble=%d loudness=%d\n",
- state->balance, state->bass, state->treble, state->loudness);
-
- msp_write_dsp(client, 0x0001, bal << 8);
- msp_write_dsp(client, 0x0002, bass);
- msp_write_dsp(client, 0x0003, treble);
- msp_write_dsp(client, 0x0004, loudness);
- if (!state->has_headphones)
- return;
- msp_write_dsp(client, 0x0030, bal << 8);
- msp_write_dsp(client, 0x0031, bass);
- msp_write_dsp(client, 0x0032, treble);
- msp_write_dsp(client, 0x0033, loudness);
-}
-
/* ------------------------------------------------------------------------ */
static void msp_wake_thread(struct i2c_client *client)
/* ------------------------------------------------------------------------ */
-static int msp_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int msp_s_ctrl(struct v4l2_ctrl *ctrl)
{
- struct msp_state *state = to_state(sd);
+ struct msp_state *state = ctrl_to_state(ctrl);
+ struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
+ int val = ctrl->val;
switch (ctrl->id) {
- case V4L2_CID_AUDIO_VOLUME:
- ctrl->value = state->volume;
- break;
-
- case V4L2_CID_AUDIO_MUTE:
- ctrl->value = state->muted;
- break;
-
- case V4L2_CID_AUDIO_BALANCE:
- if (!state->has_sound_processing)
- return -EINVAL;
- ctrl->value = state->balance;
- break;
-
- case V4L2_CID_AUDIO_BASS:
- if (!state->has_sound_processing)
- return -EINVAL;
- ctrl->value = state->bass;
+ case V4L2_CID_AUDIO_VOLUME: {
+ /* audio volume cluster */
+ int reallymuted = state->muted->val | state->scan_in_progress;
+
+ if (!reallymuted)
+ val = (val * 0x7f / 65535) << 8;
+
+ v4l_dbg(1, msp_debug, client, "mute=%s scanning=%s volume=%d\n",
+ state->muted->val ? "on" : "off",
+ state->scan_in_progress ? "yes" : "no",
+ state->volume->val);
+
+ msp_write_dsp(client, 0x0000, val);
+ msp_write_dsp(client, 0x0007, reallymuted ? 0x1 : (val | 0x1));
+ if (state->has_scart2_out_volume)
+ msp_write_dsp(client, 0x0040, reallymuted ? 0x1 : (val | 0x1));
+ if (state->has_headphones)
+ msp_write_dsp(client, 0x0006, val);
break;
-
- case V4L2_CID_AUDIO_TREBLE:
- if (!state->has_sound_processing)
- return -EINVAL;
- ctrl->value = state->treble;
- break;
-
- case V4L2_CID_AUDIO_LOUDNESS:
- if (!state->has_sound_processing)
- return -EINVAL;
- ctrl->value = state->loudness;
- break;
-
- default:
- return -EINVAL;
}
- return 0;
-}
-
-static int msp_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct msp_state *state = to_state(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_VOLUME:
- state->volume = ctrl->value;
- if (state->volume == 0)
- state->balance = 32768;
- break;
-
- case V4L2_CID_AUDIO_MUTE:
- if (ctrl->value < 0 || ctrl->value >= 2)
- return -ERANGE;
- state->muted = ctrl->value;
- break;
case V4L2_CID_AUDIO_BASS:
- if (!state->has_sound_processing)
- return -EINVAL;
- state->bass = ctrl->value;
+ val = ((val - 32768) * 0x60 / 65535) << 8;
+ msp_write_dsp(client, 0x0002, val);
+ if (state->has_headphones)
+ msp_write_dsp(client, 0x0031, val);
break;
case V4L2_CID_AUDIO_TREBLE:
- if (!state->has_sound_processing)
- return -EINVAL;
- state->treble = ctrl->value;
+ val = ((val - 32768) * 0x60 / 65535) << 8;
+ msp_write_dsp(client, 0x0003, val);
+ if (state->has_headphones)
+ msp_write_dsp(client, 0x0032, val);
break;
case V4L2_CID_AUDIO_LOUDNESS:
- if (!state->has_sound_processing)
- return -EINVAL;
- state->loudness = ctrl->value;
+ val = val ? ((5 * 4) << 8) : 0;
+ msp_write_dsp(client, 0x0004, val);
+ if (state->has_headphones)
+ msp_write_dsp(client, 0x0033, val);
break;
case V4L2_CID_AUDIO_BALANCE:
- if (!state->has_sound_processing)
- return -EINVAL;
- state->balance = ctrl->value;
+ val = (u8)((val / 256) - 128);
+ msp_write_dsp(client, 0x0001, val << 8);
+ if (state->has_headphones)
+ msp_write_dsp(client, 0x0030, val << 8);
break;
default:
return -EINVAL;
}
- msp_set_audio(client);
return 0;
}
+void msp_update_volume(struct msp_state *state)
+{
+ v4l2_ctrl_s_ctrl(state->volume, v4l2_ctrl_g_ctrl(state->volume));
+}
+
/* --- v4l2 ioctls --- */
static int msp_s_radio(struct v4l2_subdev *sd)
{
msp3400c_set_mode(client, MSP_MODE_FM_RADIO);
msp3400c_set_carrier(client, MSP_CARRIER(10.7),
MSP_CARRIER(10.7));
- msp_set_audio(client);
+ msp_update_volume(state);
break;
case OPMODE_AUTODETECT:
case OPMODE_AUTOSELECT:
return 0;
}
-static int msp_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- struct msp_state *state = to_state(sd);
-
- switch (qc->id) {
- case V4L2_CID_AUDIO_VOLUME:
- return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 58880);
- case V4L2_CID_AUDIO_MUTE:
- return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
- default:
- break;
- }
- if (!state->has_sound_processing)
- return -EINVAL;
- switch (qc->id) {
- case V4L2_CID_AUDIO_LOUDNESS:
- return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
- default:
- return -EINVAL;
- }
- return 0;
-}
-
static int msp_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
{
struct msp_state *state = to_state(sd);
struct msp_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
const char *p;
+ char prefix[V4L2_SUBDEV_NAME_SIZE + 20];
if (state->opmode == OPMODE_AUTOSELECT)
msp_detect_stereo(client);
v4l_info(client, "%s rev1 = 0x%04x rev2 = 0x%04x\n",
client->name, state->rev1, state->rev2);
- v4l_info(client, "Audio: volume %d%s\n",
- state->volume, state->muted ? " (muted)" : "");
- if (state->has_sound_processing) {
- v4l_info(client, "Audio: balance %d bass %d treble %d loudness %s\n",
- state->balance, state->bass,
- state->treble,
- state->loudness ? "on" : "off");
- }
+ snprintf(prefix, sizeof(prefix), "%s: Audio: ", sd->name);
+ v4l2_ctrl_handler_log_status(&state->hdl, prefix);
switch (state->mode) {
case MSP_MODE_AM_DETECT: p = "AM (for carrier detect)"; break;
case MSP_MODE_FM_RADIO: p = "FM Radio"; break;
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops msp_ctrl_ops = {
+ .s_ctrl = msp_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops msp_core_ops = {
.log_status = msp_log_status,
.g_chip_ident = msp_g_chip_ident,
- .g_ctrl = msp_g_ctrl,
- .s_ctrl = msp_s_ctrl,
- .queryctrl = msp_queryctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
.s_std = msp_s_std,
};
{
struct msp_state *state;
struct v4l2_subdev *sd;
+ struct v4l2_ctrl_handler *hdl;
int (*thread_func)(void *data) = NULL;
int msp_hard;
int msp_family;
state->v4l2_std = V4L2_STD_NTSC;
state->audmode = V4L2_TUNER_MODE_STEREO;
- state->volume = 58880; /* 0db gain */
- state->balance = 32768; /* 0db gain */
- state->bass = 32768;
- state->treble = 32768;
- state->loudness = 0;
state->input = -1;
- state->muted = 0;
state->i2s_mode = 0;
init_waitqueue_head(&state->wq);
/* These are the reset input/output positions */
return -ENODEV;
}
- msp_set_audio(client);
-
msp_family = ((state->rev1 >> 4) & 0x0f) + 3;
msp_product = (state->rev2 >> 8) & 0xff;
msp_prod_hi = msp_product / 10;
state->opmode = OPMODE_MANUAL;
}
+ hdl = &state->hdl;
+ v4l2_ctrl_handler_init(hdl, 6);
+ if (state->has_sound_processing) {
+ v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_BASS, 0, 65535, 65535 / 100, 32768);
+ v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_TREBLE, 0, 65535, 65535 / 100, 32768);
+ v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 0);
+ }
+ state->volume = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 58880);
+ v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
+ state->muted = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ sd->ctrl_handler = hdl;
+ if (hdl->error) {
+ int err = hdl->error;
+
+ v4l2_ctrl_handler_free(hdl);
+ kfree(state);
+ return err;
+ }
+
+ v4l2_ctrl_cluster(2, &state->volume);
+ v4l2_ctrl_handler_setup(hdl);
+
/* hello world :-) */
v4l_info(client, "MSP%d4%02d%c-%c%d found @ 0x%x (%s)\n",
msp_family, msp_product,
}
msp_reset(client);
+ v4l2_ctrl_handler_free(&state->hdl);
kfree(state);
return 0;
}
#include <media/msp3400.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
/* ---------------------------------------------------------------------- */
struct msp_state {
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
int rev1, rev2;
int ident;
u8 has_nicam;
int audmode;
int rxsubchans;
- int volume, muted;
- int balance, loudness;
- int bass, treble;
+ struct {
+ /* volume cluster */
+ struct v4l2_ctrl *volume;
+ struct v4l2_ctrl *muted;
+ };
+
int scan_in_progress;
/* thread */
return container_of(sd, struct msp_state, sd);
}
+static inline struct msp_state *ctrl_to_state(struct v4l2_ctrl *ctrl)
+{
+ return container_of(ctrl->handler, struct msp_state, hdl);
+}
+
/* msp3400-driver.c */
int msp_write_dem(struct i2c_client *client, int addr, int val);
int msp_write_dsp(struct i2c_client *client, int addr, int val);
int msp_read_dsp(struct i2c_client *client, int addr);
int msp_reset(struct i2c_client *client);
void msp_set_scart(struct i2c_client *client, int in, int out);
-void msp_set_audio(struct i2c_client *client);
+void msp_update_volume(struct msp_state *state);
int msp_sleep(struct msp_state *state, int timeout);
/* msp3400-kthreads.c */
v4l_dbg(1, msp_debug, client,
"thread: no carrier scan\n");
state->scan_in_progress = 0;
- msp_set_audio(client);
+ msp_update_volume(state);
continue;
}
/* mute audio */
state->scan_in_progress = 1;
- msp_set_audio(client);
+ msp_update_volume(state);
msp3400c_set_mode(client, MSP_MODE_AM_DETECT);
val1 = val2 = 0;
/* unmute */
state->scan_in_progress = 0;
msp3400c_set_audmode(client);
- msp_set_audio(client);
+ msp_update_volume(state);
if (msp_debug)
msp3400c_print_mode(client);
v4l_dbg(1, msp_debug, client,
"thread: no carrier scan\n");
state->scan_in_progress = 0;
- msp_set_audio(client);
+ msp_update_volume(state);
continue;
}
/* mute audio */
state->scan_in_progress = 1;
- msp_set_audio(client);
+ msp_update_volume(state);
/* start autodetect. Note: autodetect is not supported for
NTSC-M and radio, hence we force the standard in those
/* unmute */
msp3400c_set_audmode(client);
state->scan_in_progress = 0;
- msp_set_audio(client);
+ msp_update_volume(state);
/* monitor tv audio mode, the first time don't wait
so long to get a quick stereo/bilingual result */
v4l_dbg(1, msp_debug, client,
"thread: no carrier scan\n");
state->scan_in_progress = 0;
- msp_set_audio(client);
+ msp_update_volume(state);
continue;
}
}
/* unmute: dispatch sound to scart output, set scart volume */
- msp_set_audio(client);
+ msp_update_volume(state);
/* restore ACB */
if (msp_write_dsp(client, 0x13, state->acb))
/*
- * Driver for MT9M111/MT9M112 CMOS Image Sensor from Micron
+ * Driver for MT9M111/MT9M112/MT9M131 CMOS Image Sensor from Micron/Aptina
*
* Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr>
*
#include <media/soc_camera.h>
/*
- * mt9m111 and mt9m112 i2c address is 0x5d or 0x48 (depending on SAddr pin)
+ * MT9M111, MT9M112 and MT9M131:
+ * i2c address is 0x48 or 0x5d (depending on SADDR pin)
* The platform has to define i2c_board_info and call i2c_register_board_info()
*/
-/* mt9m111: Sensor register addresses */
+/*
+ * Sensor core register addresses (0x000..0x0ff)
+ */
#define MT9M111_CHIP_VERSION 0x000
#define MT9M111_ROW_START 0x001
#define MT9M111_COLUMN_START 0x002
#define MT9M111_CTXT_CTRL_LED_FLASH_EN (1 << 2)
#define MT9M111_CTXT_CTRL_VBLANK_SEL_B (1 << 1)
#define MT9M111_CTXT_CTRL_HBLANK_SEL_B (1 << 0)
+
/*
- * mt9m111: Colorpipe register addresses (0x100..0x1ff)
+ * Colorpipe register addresses (0x100..0x1ff)
*/
#define MT9M111_OPER_MODE_CTRL 0x106
#define MT9M111_OUTPUT_FORMAT_CTRL 0x108
#define MT9M111_OUTFMT_SWAP_YCbCr_C_Y (1 << 1)
#define MT9M111_OUTFMT_SWAP_RGB_EVEN (1 << 1)
#define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr (1 << 0)
+
/*
- * mt9m111: Camera control register addresses (0x200..0x2ff not implemented)
+ * Camera control register addresses (0x200..0x2ff not implemented)
*/
#define reg_read(reg) mt9m111_reg_read(client, MT9M111_##reg)
struct mt9m111 {
struct v4l2_subdev subdev;
- int model; /* V4L2_IDENT_MT9M11x* codes from v4l2-chip-ident.h */
+ int model; /* V4L2_IDENT_MT9M111 or V4L2_IDENT_MT9M112 code
+ * from v4l2-chip-ident.h */
enum mt9m111_context context;
struct v4l2_rect rect;
const struct mt9m111_datafmt *fmt;
if (!ret)
ret = mt9m111_set_autoexposure(client, mt9m111->autoexposure);
if (ret)
- dev_err(&client->dev, "mt9m11x init failed: %d\n", ret);
+ dev_err(&client->dev, "mt9m111 init failed: %d\n", ret);
return ret;
}
mt9m111->swap_rgb_even_odd = 1;
mt9m111->swap_rgb_red_blue = 1;
- ret = mt9m111_init(client);
- if (ret)
- goto ei2c;
-
data = reg_read(CHIP_VERSION);
switch (data) {
- case 0x143a: /* MT9M111 */
+ case 0x143a: /* MT9M111 or MT9M131 */
mt9m111->model = V4L2_IDENT_MT9M111;
+ dev_info(&client->dev,
+ "Detected a MT9M111/MT9M131 chip ID %x\n", data);
break;
case 0x148c: /* MT9M112 */
mt9m111->model = V4L2_IDENT_MT9M112;
+ dev_info(&client->dev, "Detected a MT9M112 chip ID %x\n", data);
break;
default:
ret = -ENODEV;
dev_err(&client->dev,
- "No MT9M11x chip detected, register read %x\n", data);
+ "No MT9M111/MT9M112/MT9M131 chip detected register read %x\n",
+ data);
goto ei2c;
}
- dev_info(&client->dev, "Detected a MT9M11x chip ID %x\n", data);
+ ret = mt9m111_init(client);
ei2c:
return ret;
int ret;
if (!icd) {
- dev_err(&client->dev, "MT9M11x: missing soc-camera data!\n");
+ dev_err(&client->dev, "mt9m111: soc-camera data missing!\n");
return -EINVAL;
}
icl = to_soc_camera_link(icd);
if (!icl) {
- dev_err(&client->dev, "MT9M11x driver needs platform data\n");
+ dev_err(&client->dev, "mt9m111: driver needs platform data\n");
return -EINVAL;
}
module_init(mt9m111_mod_init);
module_exit(mt9m111_mod_exit);
-MODULE_DESCRIPTION("Micron MT9M111/MT9M112 Camera driver");
+MODULE_DESCRIPTION("Micron/Aptina MT9M111/MT9M112/MT9M131 Camera driver");
MODULE_AUTHOR("Robert Jarzmik");
MODULE_LICENSE("GPL");
if (ret < 0)
return ret;
+ if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
+ csicr1 |= CSICR1_REDGE;
if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
csicr1 |= CSICR1_INV_PCLK;
if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
buf = list_entry(pcdev->capture.next,
struct mx2_buffer, vb.queue);
- buf->bufnum = bufnum;
+ buf->bufnum = !bufnum;
list_move_tail(pcdev->capture.next, &pcdev->active_bufs);
u32 *num_ptr)
{
u32 result = 0;
- u32 val;
- int ch;
int radix = 10;
if ((count >= 2) && (buf[0] == '0') &&
((buf[1] == 'x') || (buf[1] == 'X'))) {
}
while (count--) {
- ch = *buf++;
- if ((ch >= '0') && (ch <= '9')) {
- val = ch - '0';
- } else if ((ch >= 'a') && (ch <= 'f')) {
- val = ch - 'a' + 10;
- } else if ((ch >= 'A') && (ch <= 'F')) {
- val = ch - 'A' + 10;
- } else {
+ int val = hex_to_bin(*buf++);
+ if (val < 0 || val >= radix)
return -EINVAL;
- }
- if (val >= radix) return -EINVAL;
result *= radix;
result += val;
}
--- /dev/null
+
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) := s5p-fimc.o
+s5p-fimc-y := fimc-core.o fimc-reg.o
--- /dev/null
+/*
+ * S5P camera interface (video postprocessor) driver
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation, either version 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/bug.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf-dma-contig.h>
+
+#include "fimc-core.h"
+
+static char *fimc_clock_name[NUM_FIMC_CLOCKS] = { "sclk_fimc", "fimc" };
+
+static struct fimc_fmt fimc_formats[] = {
+ {
+ .name = "RGB565",
+ .fourcc = V4L2_PIX_FMT_RGB565X,
+ .depth = 16,
+ .color = S5P_FIMC_RGB565,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "BGR666",
+ .fourcc = V4L2_PIX_FMT_BGR666,
+ .depth = 32,
+ .color = S5P_FIMC_RGB666,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "XRGB-8-8-8-8, 24 bpp",
+ .fourcc = V4L2_PIX_FMT_RGB24,
+ .depth = 32,
+ .color = S5P_FIMC_RGB888,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "YUV 4:2:2 packed, YCbYCr",
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .depth = 16,
+ .color = S5P_FIMC_YCBYCR422,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "YUV 4:2:2 packed, CbYCrY",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .depth = 16,
+ .color = S5P_FIMC_CBYCRY422,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "YUV 4:2:2 packed, CrYCbY",
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .depth = 16,
+ .color = S5P_FIMC_CRYCBY422,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "YUV 4:2:2 packed, YCrYCb",
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .depth = 16,
+ .color = S5P_FIMC_YCRYCB422,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "YUV 4:2:2 planar, Y/Cb/Cr",
+ .fourcc = V4L2_PIX_FMT_YUV422P,
+ .depth = 12,
+ .color = S5P_FIMC_YCBCR422,
+ .buff_cnt = 1,
+ .planes_cnt = 3
+ }, {
+ .name = "YUV 4:2:2 planar, Y/CbCr",
+ .fourcc = V4L2_PIX_FMT_NV16,
+ .depth = 16,
+ .color = S5P_FIMC_YCBCR422,
+ .buff_cnt = 1,
+ .planes_cnt = 2
+ }, {
+ .name = "YUV 4:2:2 planar, Y/CrCb",
+ .fourcc = V4L2_PIX_FMT_NV61,
+ .depth = 16,
+ .color = S5P_FIMC_RGB565,
+ .buff_cnt = 1,
+ .planes_cnt = 2
+ }, {
+ .name = "YUV 4:2:0 planar, YCbCr",
+ .fourcc = V4L2_PIX_FMT_YUV420,
+ .depth = 12,
+ .color = S5P_FIMC_YCBCR420,
+ .buff_cnt = 1,
+ .planes_cnt = 3
+ }, {
+ .name = "YUV 4:2:0 planar, Y/CbCr",
+ .fourcc = V4L2_PIX_FMT_NV12,
+ .depth = 12,
+ .color = S5P_FIMC_YCBCR420,
+ .buff_cnt = 1,
+ .planes_cnt = 2
+ }
+ };
+
+static struct v4l2_queryctrl fimc_ctrls[] = {
+ {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Horizontal flip",
+ .minimum = 0,
+ .maximum = 1,
+ .default_value = 0,
+ },
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vertical flip",
+ .minimum = 0,
+ .maximum = 1,
+ .default_value = 0,
+ },
+ {
+ .id = V4L2_CID_ROTATE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Rotation (CCW)",
+ .minimum = 0,
+ .maximum = 270,
+ .step = 90,
+ .default_value = 0,
+ },
+};
+
+
+static struct v4l2_queryctrl *get_ctrl(int id)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fimc_ctrls); ++i)
+ if (id == fimc_ctrls[i].id)
+ return &fimc_ctrls[i];
+ return NULL;
+}
+
+static int fimc_check_scaler_ratio(struct v4l2_rect *r, struct fimc_frame *f)
+{
+ if (r->width > f->width) {
+ if (f->width > (r->width * SCALER_MAX_HRATIO))
+ return -EINVAL;
+ } else {
+ if ((f->width * SCALER_MAX_HRATIO) < r->width)
+ return -EINVAL;
+ }
+
+ if (r->height > f->height) {
+ if (f->height > (r->height * SCALER_MAX_VRATIO))
+ return -EINVAL;
+ } else {
+ if ((f->height * SCALER_MAX_VRATIO) < r->height)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int fimc_get_scaler_factor(u32 src, u32 tar, u32 *ratio, u32 *shift)
+{
+ if (src >= tar * 64) {
+ return -EINVAL;
+ } else if (src >= tar * 32) {
+ *ratio = 32;
+ *shift = 5;
+ } else if (src >= tar * 16) {
+ *ratio = 16;
+ *shift = 4;
+ } else if (src >= tar * 8) {
+ *ratio = 8;
+ *shift = 3;
+ } else if (src >= tar * 4) {
+ *ratio = 4;
+ *shift = 2;
+ } else if (src >= tar * 2) {
+ *ratio = 2;
+ *shift = 1;
+ } else {
+ *ratio = 1;
+ *shift = 0;
+ }
+
+ return 0;
+}
+
+static int fimc_set_scaler_info(struct fimc_ctx *ctx)
+{
+ struct fimc_scaler *sc = &ctx->scaler;
+ struct fimc_frame *s_frame = &ctx->s_frame;
+ struct fimc_frame *d_frame = &ctx->d_frame;
+ int tx, ty, sx, sy;
+ int ret;
+
+ tx = d_frame->width;
+ ty = d_frame->height;
+ if (tx <= 0 || ty <= 0) {
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+ "invalid target size: %d x %d", tx, ty);
+ return -EINVAL;
+ }
+
+ sx = s_frame->width;
+ sy = s_frame->height;
+ if (sx <= 0 || sy <= 0) {
+ err("invalid source size: %d x %d", sx, sy);
+ return -EINVAL;
+ }
+
+ sc->real_width = sx;
+ sc->real_height = sy;
+ dbg("sx= %d, sy= %d, tx= %d, ty= %d", sx, sy, tx, ty);
+
+ ret = fimc_get_scaler_factor(sx, tx, &sc->pre_hratio, &sc->hfactor);
+ if (ret)
+ return ret;
+
+ ret = fimc_get_scaler_factor(sy, ty, &sc->pre_vratio, &sc->vfactor);
+ if (ret)
+ return ret;
+
+ sc->pre_dst_width = sx / sc->pre_hratio;
+ sc->pre_dst_height = sy / sc->pre_vratio;
+
+ sc->main_hratio = (sx << 8) / (tx << sc->hfactor);
+ sc->main_vratio = (sy << 8) / (ty << sc->vfactor);
+
+ sc->scaleup_h = (tx >= sx) ? 1 : 0;
+ sc->scaleup_v = (ty >= sy) ? 1 : 0;
+
+ /* check to see if input and output size/format differ */
+ if (s_frame->fmt->color == d_frame->fmt->color
+ && s_frame->width == d_frame->width
+ && s_frame->height == d_frame->height)
+ sc->copy_mode = 1;
+ else
+ sc->copy_mode = 0;
+
+ return 0;
+}
+
+
+static irqreturn_t fimc_isr(int irq, void *priv)
+{
+ struct fimc_vid_buffer *src_buf, *dst_buf;
+ struct fimc_dev *fimc = (struct fimc_dev *)priv;
+ struct fimc_ctx *ctx;
+
+ BUG_ON(!fimc);
+ fimc_hw_clear_irq(fimc);
+
+ spin_lock(&fimc->slock);
+
+ if (test_and_clear_bit(ST_M2M_PEND, &fimc->state)) {
+ ctx = v4l2_m2m_get_curr_priv(fimc->m2m.m2m_dev);
+ if (!ctx || !ctx->m2m_ctx)
+ goto isr_unlock;
+ src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+ dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
+ if (src_buf && dst_buf) {
+ spin_lock(&fimc->irqlock);
+ src_buf->vb.state = dst_buf->vb.state = VIDEOBUF_DONE;
+ wake_up(&src_buf->vb.done);
+ wake_up(&dst_buf->vb.done);
+ spin_unlock(&fimc->irqlock);
+ v4l2_m2m_job_finish(fimc->m2m.m2m_dev, ctx->m2m_ctx);
+ }
+ }
+
+isr_unlock:
+ spin_unlock(&fimc->slock);
+ return IRQ_HANDLED;
+}
+
+/* The color format (planes_cnt, buff_cnt) must be already configured. */
+static int fimc_prepare_addr(struct fimc_ctx *ctx,
+ struct fimc_vid_buffer *buf, enum v4l2_buf_type type)
+{
+ struct fimc_frame *frame;
+ struct fimc_addr *paddr;
+ u32 pix_size;
+ int ret = 0;
+
+ frame = ctx_m2m_get_frame(ctx, type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
+ paddr = &frame->paddr;
+
+ if (!buf)
+ return -EINVAL;
+
+ pix_size = frame->width * frame->height;
+
+ dbg("buff_cnt= %d, planes_cnt= %d, frame->size= %d, pix_size= %d",
+ frame->fmt->buff_cnt, frame->fmt->planes_cnt,
+ frame->size, pix_size);
+
+ if (frame->fmt->buff_cnt == 1) {
+ paddr->y = videobuf_to_dma_contig(&buf->vb);
+ switch (frame->fmt->planes_cnt) {
+ case 1:
+ paddr->cb = 0;
+ paddr->cr = 0;
+ break;
+ case 2:
+ /* decompose Y into Y/Cb */
+ paddr->cb = (u32)(paddr->y + pix_size);
+ paddr->cr = 0;
+ break;
+ case 3:
+ paddr->cb = (u32)(paddr->y + pix_size);
+ /* decompose Y into Y/Cb/Cr */
+ if (S5P_FIMC_YCBCR420 == frame->fmt->color)
+ paddr->cr = (u32)(paddr->cb
+ + (pix_size >> 2));
+ else /* 422 */
+ paddr->cr = (u32)(paddr->cb
+ + (pix_size >> 1));
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ dbg("PHYS_ADDR: type= %d, y= 0x%X cb= 0x%X cr= 0x%X ret= %d",
+ type, paddr->y, paddr->cb, paddr->cr, ret);
+
+ return ret;
+}
+
+/* Set order for 1 and 2 plane YCBCR 4:2:2 formats. */
+static void fimc_set_yuv_order(struct fimc_ctx *ctx)
+{
+ /* The one only mode supported in SoC. */
+ ctx->in_order_2p = S5P_FIMC_LSB_CRCB;
+ ctx->out_order_2p = S5P_FIMC_LSB_CRCB;
+
+ /* Set order for 1 plane input formats. */
+ switch (ctx->s_frame.fmt->color) {
+ case S5P_FIMC_YCRYCB422:
+ ctx->in_order_1p = S5P_FIMC_IN_YCRYCB;
+ break;
+ case S5P_FIMC_CBYCRY422:
+ ctx->in_order_1p = S5P_FIMC_IN_CBYCRY;
+ break;
+ case S5P_FIMC_CRYCBY422:
+ ctx->in_order_1p = S5P_FIMC_IN_CRYCBY;
+ break;
+ case S5P_FIMC_YCBYCR422:
+ default:
+ ctx->in_order_1p = S5P_FIMC_IN_YCBYCR;
+ break;
+ }
+ dbg("ctx->in_order_1p= %d", ctx->in_order_1p);
+
+ switch (ctx->d_frame.fmt->color) {
+ case S5P_FIMC_YCRYCB422:
+ ctx->out_order_1p = S5P_FIMC_OUT_YCRYCB;
+ break;
+ case S5P_FIMC_CBYCRY422:
+ ctx->out_order_1p = S5P_FIMC_OUT_CBYCRY;
+ break;
+ case S5P_FIMC_CRYCBY422:
+ ctx->out_order_1p = S5P_FIMC_OUT_CRYCBY;
+ break;
+ case S5P_FIMC_YCBYCR422:
+ default:
+ ctx->out_order_1p = S5P_FIMC_OUT_YCBYCR;
+ break;
+ }
+ dbg("ctx->out_order_1p= %d", ctx->out_order_1p);
+}
+
+/**
+ * fimc_prepare_config - check dimensions, operation and color mode
+ * and pre-calculate offset and the scaling coefficients.
+ *
+ * @ctx: hardware context information
+ * @flags: flags indicating which parameters to check/update
+ *
+ * Return: 0 if dimensions are valid or non zero otherwise.
+ */
+static int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags)
+{
+ struct fimc_frame *s_frame, *d_frame;
+ struct fimc_vid_buffer *buf = NULL;
+ struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+ int ret = 0;
+
+ s_frame = &ctx->s_frame;
+ d_frame = &ctx->d_frame;
+
+ if (flags & FIMC_PARAMS) {
+ if ((ctx->out_path == FIMC_DMA) &&
+ (ctx->rotation == 90 || ctx->rotation == 270)) {
+ swap(d_frame->f_width, d_frame->f_height);
+ swap(d_frame->width, d_frame->height);
+ }
+
+ /* Prepare the output offset ratios for scaler. */
+ d_frame->dma_offset.y_h = d_frame->offs_h;
+ if (!variant->pix_hoff)
+ d_frame->dma_offset.y_h *= (d_frame->fmt->depth >> 3);
+
+ d_frame->dma_offset.y_v = d_frame->offs_v;
+
+ d_frame->dma_offset.cb_h = d_frame->offs_h;
+ d_frame->dma_offset.cb_v = d_frame->offs_v;
+
+ d_frame->dma_offset.cr_h = d_frame->offs_h;
+ d_frame->dma_offset.cr_v = d_frame->offs_v;
+
+ if (!variant->pix_hoff && d_frame->fmt->planes_cnt == 3) {
+ d_frame->dma_offset.cb_h >>= 1;
+ d_frame->dma_offset.cb_v >>= 1;
+ d_frame->dma_offset.cr_h >>= 1;
+ d_frame->dma_offset.cr_v >>= 1;
+ }
+
+ dbg("out offset: color= %d, y_h= %d, y_v= %d",
+ d_frame->fmt->color,
+ d_frame->dma_offset.y_h, d_frame->dma_offset.y_v);
+
+ /* Prepare the input offset ratios for scaler. */
+ s_frame->dma_offset.y_h = s_frame->offs_h;
+ if (!variant->pix_hoff)
+ s_frame->dma_offset.y_h *= (s_frame->fmt->depth >> 3);
+ s_frame->dma_offset.y_v = s_frame->offs_v;
+
+ s_frame->dma_offset.cb_h = s_frame->offs_h;
+ s_frame->dma_offset.cb_v = s_frame->offs_v;
+
+ s_frame->dma_offset.cr_h = s_frame->offs_h;
+ s_frame->dma_offset.cr_v = s_frame->offs_v;
+
+ if (!variant->pix_hoff && s_frame->fmt->planes_cnt == 3) {
+ s_frame->dma_offset.cb_h >>= 1;
+ s_frame->dma_offset.cb_v >>= 1;
+ s_frame->dma_offset.cr_h >>= 1;
+ s_frame->dma_offset.cr_v >>= 1;
+ }
+
+ dbg("in offset: color= %d, y_h= %d, y_v= %d",
+ s_frame->fmt->color, s_frame->dma_offset.y_h,
+ s_frame->dma_offset.y_v);
+
+ fimc_set_yuv_order(ctx);
+
+ /* Check against the scaler ratio. */
+ if (s_frame->height > (SCALER_MAX_VRATIO * d_frame->height) ||
+ s_frame->width > (SCALER_MAX_HRATIO * d_frame->width)) {
+ err("out of scaler range");
+ return -EINVAL;
+ }
+ }
+
+ /* Input DMA mode is not allowed when the scaler is disabled. */
+ ctx->scaler.enabled = 1;
+
+ if (flags & FIMC_SRC_ADDR) {
+ buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
+ ret = fimc_prepare_addr(ctx, buf,
+ V4L2_BUF_TYPE_VIDEO_OUTPUT);
+ if (ret)
+ return ret;
+ }
+
+ if (flags & FIMC_DST_ADDR) {
+ buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
+ ret = fimc_prepare_addr(ctx, buf,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE);
+ }
+
+ return ret;
+}
+
+static void fimc_dma_run(void *priv)
+{
+ struct fimc_ctx *ctx = priv;
+ struct fimc_dev *fimc;
+ unsigned long flags;
+ u32 ret;
+
+ if (WARN(!ctx, "null hardware context"))
+ return;
+
+ fimc = ctx->fimc_dev;
+
+ spin_lock_irqsave(&ctx->slock, flags);
+ set_bit(ST_M2M_PEND, &fimc->state);
+
+ ctx->state |= (FIMC_SRC_ADDR | FIMC_DST_ADDR);
+ ret = fimc_prepare_config(ctx, ctx->state);
+ if (ret) {
+ err("general configuration error");
+ goto dma_unlock;
+ }
+
+ if (fimc->m2m.ctx != ctx)
+ ctx->state |= FIMC_PARAMS;
+
+ fimc_hw_set_input_addr(fimc, &ctx->s_frame.paddr);
+
+ if (ctx->state & FIMC_PARAMS) {
+ fimc_hw_set_input_path(ctx);
+ fimc_hw_set_in_dma(ctx);
+ if (fimc_set_scaler_info(ctx)) {
+ err("scaler configuration error");
+ goto dma_unlock;
+ }
+ fimc_hw_set_prescaler(ctx);
+ fimc_hw_set_scaler(ctx);
+ fimc_hw_set_target_format(ctx);
+ fimc_hw_set_rotation(ctx);
+ fimc_hw_set_effect(ctx);
+ }
+
+ fimc_hw_set_output_path(ctx);
+ if (ctx->state & (FIMC_DST_ADDR | FIMC_PARAMS))
+ fimc_hw_set_output_addr(fimc, &ctx->d_frame.paddr);
+
+ if (ctx->state & FIMC_PARAMS)
+ fimc_hw_set_out_dma(ctx);
+
+ if (ctx->scaler.enabled)
+ fimc_hw_start_scaler(fimc);
+ fimc_hw_en_capture(ctx);
+
+ ctx->state = 0;
+ fimc_hw_start_in_dma(fimc);
+
+ fimc->m2m.ctx = ctx;
+
+dma_unlock:
+ spin_unlock_irqrestore(&ctx->slock, flags);
+}
+
+static void fimc_job_abort(void *priv)
+{
+ /* Nothing done in job_abort. */
+}
+
+static void fimc_buf_release(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb)
+{
+ videobuf_dma_contig_free(vq, vb);
+ vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int fimc_buf_setup(struct videobuf_queue *vq, unsigned int *count,
+ unsigned int *size)
+{
+ struct fimc_ctx *ctx = vq->priv_data;
+ struct fimc_frame *frame;
+
+ frame = ctx_m2m_get_frame(ctx, vq->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
+
+ *size = (frame->width * frame->height * frame->fmt->depth) >> 3;
+ if (0 == *count)
+ *count = 1;
+ return 0;
+}
+
+static int fimc_buf_prepare(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb, enum v4l2_field field)
+{
+ struct fimc_ctx *ctx = vq->priv_data;
+ struct v4l2_device *v4l2_dev = &ctx->fimc_dev->m2m.v4l2_dev;
+ struct fimc_frame *frame;
+ int ret;
+
+ frame = ctx_m2m_get_frame(ctx, vq->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
+
+ if (vb->baddr) {
+ if (vb->bsize < frame->size) {
+ v4l2_err(v4l2_dev,
+ "User-provided buffer too small (%d < %d)\n",
+ vb->bsize, frame->size);
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ } else if (vb->state != VIDEOBUF_NEEDS_INIT
+ && vb->bsize < frame->size) {
+ return -EINVAL;
+ }
+
+ vb->width = frame->width;
+ vb->height = frame->height;
+ vb->bytesperline = (frame->width * frame->fmt->depth) >> 3;
+ vb->size = frame->size;
+ vb->field = field;
+
+ if (VIDEOBUF_NEEDS_INIT == vb->state) {
+ ret = videobuf_iolock(vq, vb, NULL);
+ if (ret) {
+ v4l2_err(v4l2_dev, "Iolock failed\n");
+ fimc_buf_release(vq, vb);
+ return ret;
+ }
+ }
+ vb->state = VIDEOBUF_PREPARED;
+
+ return 0;
+}
+
+static void fimc_buf_queue(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb)
+{
+ struct fimc_ctx *ctx = vq->priv_data;
+ v4l2_m2m_buf_queue(ctx->m2m_ctx, vq, vb);
+}
+
+static struct videobuf_queue_ops fimc_qops = {
+ .buf_setup = fimc_buf_setup,
+ .buf_prepare = fimc_buf_prepare,
+ .buf_queue = fimc_buf_queue,
+ .buf_release = fimc_buf_release,
+};
+
+static int fimc_m2m_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct fimc_ctx *ctx = file->private_data;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+
+ strncpy(cap->driver, fimc->pdev->name, sizeof(cap->driver) - 1);
+ strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1);
+ cap->bus_info[0] = 0;
+ cap->version = KERNEL_VERSION(1, 0, 0);
+ cap->capabilities = V4L2_CAP_STREAMING |
+ V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT;
+
+ return 0;
+}
+
+static int fimc_m2m_enum_fmt(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ struct fimc_fmt *fmt;
+
+ if (f->index >= ARRAY_SIZE(fimc_formats))
+ return -EINVAL;
+
+ fmt = &fimc_formats[f->index];
+ strncpy(f->description, fmt->name, sizeof(f->description) - 1);
+ f->pixelformat = fmt->fourcc;
+ return 0;
+}
+
+static int fimc_m2m_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct fimc_ctx *ctx = priv;
+ struct fimc_frame *frame;
+
+ frame = ctx_m2m_get_frame(ctx, f->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
+
+ f->fmt.pix.width = frame->width;
+ f->fmt.pix.height = frame->height;
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ f->fmt.pix.pixelformat = frame->fmt->fourcc;
+
+ return 0;
+}
+
+static struct fimc_fmt *find_format(struct v4l2_format *f)
+{
+ struct fimc_fmt *fmt;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) {
+ fmt = &fimc_formats[i];
+ if (fmt->fourcc == f->fmt.pix.pixelformat)
+ break;
+ }
+ if (i == ARRAY_SIZE(fimc_formats))
+ return NULL;
+
+ return fmt;
+}
+
+static int fimc_m2m_try_fmt(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct fimc_fmt *fmt;
+ u32 max_width, max_height, mod_x, mod_y;
+ struct fimc_ctx *ctx = priv;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ struct samsung_fimc_variant *variant = fimc->variant;
+
+ fmt = find_format(f);
+ if (!fmt) {
+ v4l2_err(&fimc->m2m.v4l2_dev,
+ "Fourcc format (0x%X) invalid.\n", pix->pixelformat);
+ return -EINVAL;
+ }
+
+ if (pix->field == V4L2_FIELD_ANY)
+ pix->field = V4L2_FIELD_NONE;
+ else if (V4L2_FIELD_NONE != pix->field)
+ return -EINVAL;
+
+ if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+ max_width = variant->scaler_dis_w;
+ max_height = variant->scaler_dis_w;
+ mod_x = variant->min_inp_pixsize;
+ mod_y = variant->min_inp_pixsize;
+ } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+ max_width = variant->out_rot_dis_w;
+ max_height = variant->out_rot_dis_w;
+ mod_x = variant->min_out_pixsize;
+ mod_y = variant->min_out_pixsize;
+ } else {
+ err("Wrong stream type (%d)", f->type);
+ return -EINVAL;
+ }
+
+ dbg("max_w= %d, max_h= %d", max_width, max_height);
+
+ if (pix->height > max_height)
+ pix->height = max_height;
+ if (pix->width > max_width)
+ pix->width = max_width;
+
+ if (tiled_fmt(fmt)) {
+ mod_x = 64; /* 64x32 tile */
+ mod_y = 32;
+ }
+
+ dbg("mod_x= 0x%X, mod_y= 0x%X", mod_x, mod_y);
+
+ pix->width = (pix->width == 0) ? mod_x : ALIGN(pix->width, mod_x);
+ pix->height = (pix->height == 0) ? mod_y : ALIGN(pix->height, mod_y);
+
+ if (pix->bytesperline == 0 ||
+ pix->bytesperline * 8 / fmt->depth > pix->width)
+ pix->bytesperline = (pix->width * fmt->depth) >> 3;
+
+ if (pix->sizeimage == 0)
+ pix->sizeimage = pix->height * pix->bytesperline;
+
+ dbg("pix->bytesperline= %d, fmt->depth= %d",
+ pix->bytesperline, fmt->depth);
+
+ return 0;
+}
+
+
+static int fimc_m2m_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct fimc_ctx *ctx = priv;
+ struct v4l2_device *v4l2_dev = &ctx->fimc_dev->m2m.v4l2_dev;
+ struct videobuf_queue *src_vq, *dst_vq;
+ struct fimc_frame *frame;
+ struct v4l2_pix_format *pix;
+ unsigned long flags;
+ int ret = 0;
+
+ BUG_ON(!ctx);
+
+ ret = fimc_m2m_try_fmt(file, priv, f);
+ if (ret)
+ return ret;
+
+ mutex_lock(&ctx->fimc_dev->lock);
+
+ src_vq = v4l2_m2m_get_src_vq(ctx->m2m_ctx);
+ dst_vq = v4l2_m2m_get_dst_vq(ctx->m2m_ctx);
+
+ mutex_lock(&src_vq->vb_lock);
+ mutex_lock(&dst_vq->vb_lock);
+
+ if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+ if (videobuf_queue_is_busy(src_vq)) {
+ v4l2_err(v4l2_dev, "%s queue busy\n", __func__);
+ ret = -EBUSY;
+ goto s_fmt_out;
+ }
+ frame = &ctx->s_frame;
+ spin_lock_irqsave(&ctx->slock, flags);
+ ctx->state |= FIMC_SRC_FMT;
+ spin_unlock_irqrestore(&ctx->slock, flags);
+
+ } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+ if (videobuf_queue_is_busy(dst_vq)) {
+ v4l2_err(v4l2_dev, "%s queue busy\n", __func__);
+ ret = -EBUSY;
+ goto s_fmt_out;
+ }
+ frame = &ctx->d_frame;
+ spin_lock_irqsave(&ctx->slock, flags);
+ ctx->state |= FIMC_DST_FMT;
+ spin_unlock_irqrestore(&ctx->slock, flags);
+ } else {
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+ "Wrong buffer/video queue type (%d)\n", f->type);
+ return -EINVAL;
+ }
+
+ pix = &f->fmt.pix;
+ frame->fmt = find_format(f);
+ if (!frame->fmt) {
+ ret = -EINVAL;
+ goto s_fmt_out;
+ }
+
+ frame->f_width = pix->bytesperline * 8 / frame->fmt->depth;
+ frame->f_height = pix->sizeimage/pix->bytesperline;
+ frame->width = pix->width;
+ frame->height = pix->height;
+ frame->o_width = pix->width;
+ frame->o_height = pix->height;
+ frame->offs_h = 0;
+ frame->offs_v = 0;
+ frame->size = (pix->width * pix->height * frame->fmt->depth) >> 3;
+ src_vq->field = dst_vq->field = pix->field;
+ spin_lock_irqsave(&ctx->slock, flags);
+ ctx->state |= FIMC_PARAMS;
+ spin_unlock_irqrestore(&ctx->slock, flags);
+
+ dbg("f_width= %d, f_height= %d", frame->f_width, frame->f_height);
+
+s_fmt_out:
+ mutex_unlock(&dst_vq->vb_lock);
+ mutex_unlock(&src_vq->vb_lock);
+ mutex_unlock(&ctx->fimc_dev->lock);
+ return ret;
+}
+
+static int fimc_m2m_reqbufs(struct file *file, void *priv,
+ struct v4l2_requestbuffers *reqbufs)
+{
+ struct fimc_ctx *ctx = priv;
+ return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs);
+}
+
+static int fimc_m2m_querybuf(struct file *file, void *priv,
+ struct v4l2_buffer *buf)
+{
+ struct fimc_ctx *ctx = priv;
+ return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf);
+}
+
+static int fimc_m2m_qbuf(struct file *file, void *priv,
+ struct v4l2_buffer *buf)
+{
+ struct fimc_ctx *ctx = priv;
+
+ return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf);
+}
+
+static int fimc_m2m_dqbuf(struct file *file, void *priv,
+ struct v4l2_buffer *buf)
+{
+ struct fimc_ctx *ctx = priv;
+ return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
+}
+
+static int fimc_m2m_streamon(struct file *file, void *priv,
+ enum v4l2_buf_type type)
+{
+ struct fimc_ctx *ctx = priv;
+ return v4l2_m2m_streamon(file, ctx->m2m_ctx, type);
+}
+
+static int fimc_m2m_streamoff(struct file *file, void *priv,
+ enum v4l2_buf_type type)
+{
+ struct fimc_ctx *ctx = priv;
+ return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type);
+}
+
+int fimc_m2m_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ struct v4l2_queryctrl *c;
+ c = get_ctrl(qc->id);
+ if (!c)
+ return -EINVAL;
+ *qc = *c;
+ return 0;
+}
+
+int fimc_m2m_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct fimc_ctx *ctx = priv;
+
+ switch (ctrl->id) {
+ case V4L2_CID_HFLIP:
+ ctrl->value = (FLIP_X_AXIS & ctx->flip) ? 1 : 0;
+ break;
+ case V4L2_CID_VFLIP:
+ ctrl->value = (FLIP_Y_AXIS & ctx->flip) ? 1 : 0;
+ break;
+ case V4L2_CID_ROTATE:
+ ctrl->value = ctx->rotation;
+ break;
+ default:
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev, "Invalid control\n");
+ return -EINVAL;
+ }
+ dbg("ctrl->value= %d", ctrl->value);
+ return 0;
+}
+
+static int check_ctrl_val(struct fimc_ctx *ctx,
+ struct v4l2_control *ctrl)
+{
+ struct v4l2_queryctrl *c;
+ c = get_ctrl(ctrl->id);
+ if (!c)
+ return -EINVAL;
+
+ if (ctrl->value < c->minimum || ctrl->value > c->maximum
+ || (c->step != 0 && ctrl->value % c->step != 0)) {
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+ "Invalid control value\n");
+ return -ERANGE;
+ }
+
+ return 0;
+}
+
+int fimc_m2m_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct fimc_ctx *ctx = priv;
+ struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+ unsigned long flags;
+ int ret = 0;
+
+ ret = check_ctrl_val(ctx, ctrl);
+ if (ret)
+ return ret;
+
+ switch (ctrl->id) {
+ case V4L2_CID_HFLIP:
+ if (ctx->rotation != 0)
+ return 0;
+ if (ctrl->value)
+ ctx->flip |= FLIP_X_AXIS;
+ else
+ ctx->flip &= ~FLIP_X_AXIS;
+ break;
+
+ case V4L2_CID_VFLIP:
+ if (ctx->rotation != 0)
+ return 0;
+ if (ctrl->value)
+ ctx->flip |= FLIP_Y_AXIS;
+ else
+ ctx->flip &= ~FLIP_Y_AXIS;
+ break;
+
+ case V4L2_CID_ROTATE:
+ if (ctrl->value == 90 || ctrl->value == 270) {
+ if (ctx->out_path == FIMC_LCDFIFO &&
+ !variant->has_inp_rot) {
+ return -EINVAL;
+ } else if (ctx->in_path == FIMC_DMA &&
+ !variant->has_out_rot) {
+ return -EINVAL;
+ }
+ }
+ ctx->rotation = ctrl->value;
+ if (ctrl->value == 180)
+ ctx->flip = FLIP_XY_AXIS;
+ break;
+
+ default:
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev, "Invalid control\n");
+ return -EINVAL;
+ }
+ spin_lock_irqsave(&ctx->slock, flags);
+ ctx->state |= FIMC_PARAMS;
+ spin_unlock_irqrestore(&ctx->slock, flags);
+ return 0;
+}
+
+
+static int fimc_m2m_cropcap(struct file *file, void *fh,
+ struct v4l2_cropcap *cr)
+{
+ struct fimc_frame *frame;
+ struct fimc_ctx *ctx = fh;
+
+ frame = ctx_m2m_get_frame(ctx, cr->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
+
+ cr->bounds.left = 0;
+ cr->bounds.top = 0;
+ cr->bounds.width = frame->f_width;
+ cr->bounds.height = frame->f_height;
+ cr->defrect.left = frame->offs_h;
+ cr->defrect.top = frame->offs_v;
+ cr->defrect.width = frame->o_width;
+ cr->defrect.height = frame->o_height;
+ return 0;
+}
+
+static int fimc_m2m_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
+{
+ struct fimc_frame *frame;
+ struct fimc_ctx *ctx = file->private_data;
+
+ frame = ctx_m2m_get_frame(ctx, cr->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
+
+ cr->c.left = frame->offs_h;
+ cr->c.top = frame->offs_v;
+ cr->c.width = frame->width;
+ cr->c.height = frame->height;
+
+ return 0;
+}
+
+static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr)
+{
+ struct fimc_ctx *ctx = file->private_data;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+ unsigned long flags;
+ struct fimc_frame *f;
+ u32 min_size;
+ int ret = 0;
+
+ if (cr->c.top < 0 || cr->c.left < 0) {
+ v4l2_err(&fimc->m2m.v4l2_dev,
+ "doesn't support negative values for top & left\n");
+ return -EINVAL;
+ }
+
+ if (cr->c.width <= 0 || cr->c.height <= 0) {
+ v4l2_err(&fimc->m2m.v4l2_dev,
+ "crop width and height must be greater than 0\n");
+ return -EINVAL;
+ }
+
+ f = ctx_m2m_get_frame(ctx, cr->type);
+ if (IS_ERR(f))
+ return PTR_ERR(f);
+
+ /* Adjust to required pixel boundary. */
+ min_size = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) ?
+ fimc->variant->min_inp_pixsize : fimc->variant->min_out_pixsize;
+
+ cr->c.width = round_down(cr->c.width, min_size);
+ cr->c.height = round_down(cr->c.height, min_size);
+ cr->c.left = round_down(cr->c.left + 1, min_size);
+ cr->c.top = round_down(cr->c.top + 1, min_size);
+
+ if ((cr->c.left + cr->c.width > f->o_width)
+ || (cr->c.top + cr->c.height > f->o_height)) {
+ v4l2_err(&fimc->m2m.v4l2_dev, "Error in S_CROP params\n");
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&ctx->slock, flags);
+ if ((ctx->state & FIMC_SRC_FMT) && (ctx->state & FIMC_DST_FMT)) {
+ /* Check for the pixel scaling ratio when cropping input img. */
+ if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
+ ret = fimc_check_scaler_ratio(&cr->c, &ctx->d_frame);
+ else if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ ret = fimc_check_scaler_ratio(&cr->c, &ctx->s_frame);
+
+ if (ret) {
+ spin_unlock_irqrestore(&ctx->slock, flags);
+ v4l2_err(&fimc->m2m.v4l2_dev, "Out of scaler range");
+ return -EINVAL;
+ }
+ }
+ ctx->state |= FIMC_PARAMS;
+ spin_unlock_irqrestore(&ctx->slock, flags);
+
+ f->offs_h = cr->c.left;
+ f->offs_v = cr->c.top;
+ f->width = cr->c.width;
+ f->height = cr->c.height;
+ return 0;
+}
+
+static const struct v4l2_ioctl_ops fimc_m2m_ioctl_ops = {
+ .vidioc_querycap = fimc_m2m_querycap,
+
+ .vidioc_enum_fmt_vid_cap = fimc_m2m_enum_fmt,
+ .vidioc_enum_fmt_vid_out = fimc_m2m_enum_fmt,
+
+ .vidioc_g_fmt_vid_cap = fimc_m2m_g_fmt,
+ .vidioc_g_fmt_vid_out = fimc_m2m_g_fmt,
+
+ .vidioc_try_fmt_vid_cap = fimc_m2m_try_fmt,
+ .vidioc_try_fmt_vid_out = fimc_m2m_try_fmt,
+
+ .vidioc_s_fmt_vid_cap = fimc_m2m_s_fmt,
+ .vidioc_s_fmt_vid_out = fimc_m2m_s_fmt,
+
+ .vidioc_reqbufs = fimc_m2m_reqbufs,
+ .vidioc_querybuf = fimc_m2m_querybuf,
+
+ .vidioc_qbuf = fimc_m2m_qbuf,
+ .vidioc_dqbuf = fimc_m2m_dqbuf,
+
+ .vidioc_streamon = fimc_m2m_streamon,
+ .vidioc_streamoff = fimc_m2m_streamoff,
+
+ .vidioc_queryctrl = fimc_m2m_queryctrl,
+ .vidioc_g_ctrl = fimc_m2m_g_ctrl,
+ .vidioc_s_ctrl = fimc_m2m_s_ctrl,
+
+ .vidioc_g_crop = fimc_m2m_g_crop,
+ .vidioc_s_crop = fimc_m2m_s_crop,
+ .vidioc_cropcap = fimc_m2m_cropcap
+
+};
+
+static void queue_init(void *priv, struct videobuf_queue *vq,
+ enum v4l2_buf_type type)
+{
+ struct fimc_ctx *ctx = priv;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+
+ videobuf_queue_dma_contig_init(vq, &fimc_qops,
+ fimc->m2m.v4l2_dev.dev,
+ &fimc->irqlock, type, V4L2_FIELD_NONE,
+ sizeof(struct fimc_vid_buffer), priv);
+}
+
+static int fimc_m2m_open(struct file *file)
+{
+ struct fimc_dev *fimc = video_drvdata(file);
+ struct fimc_ctx *ctx = NULL;
+ int err = 0;
+
+ mutex_lock(&fimc->lock);
+ fimc->m2m.refcnt++;
+ set_bit(ST_OUTDMA_RUN, &fimc->state);
+ mutex_unlock(&fimc->lock);
+
+
+ ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ file->private_data = ctx;
+ ctx->fimc_dev = fimc;
+ /* default format */
+ ctx->s_frame.fmt = &fimc_formats[0];
+ ctx->d_frame.fmt = &fimc_formats[0];
+ /* per user process device context initialization */
+ ctx->state = 0;
+ ctx->flags = 0;
+ ctx->effect.type = S5P_FIMC_EFFECT_ORIGINAL;
+ ctx->in_path = FIMC_DMA;
+ ctx->out_path = FIMC_DMA;
+ spin_lock_init(&ctx->slock);
+
+ ctx->m2m_ctx = v4l2_m2m_ctx_init(ctx, fimc->m2m.m2m_dev, queue_init);
+ if (IS_ERR(ctx->m2m_ctx)) {
+ err = PTR_ERR(ctx->m2m_ctx);
+ kfree(ctx);
+ }
+ return err;
+}
+
+static int fimc_m2m_release(struct file *file)
+{
+ struct fimc_ctx *ctx = file->private_data;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+
+ v4l2_m2m_ctx_release(ctx->m2m_ctx);
+ kfree(ctx);
+ mutex_lock(&fimc->lock);
+ if (--fimc->m2m.refcnt <= 0)
+ clear_bit(ST_OUTDMA_RUN, &fimc->state);
+ mutex_unlock(&fimc->lock);
+ return 0;
+}
+
+static unsigned int fimc_m2m_poll(struct file *file,
+ struct poll_table_struct *wait)
+{
+ struct fimc_ctx *ctx = file->private_data;
+ return v4l2_m2m_poll(file, ctx->m2m_ctx, wait);
+}
+
+
+static int fimc_m2m_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct fimc_ctx *ctx = file->private_data;
+ return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma);
+}
+
+static const struct v4l2_file_operations fimc_m2m_fops = {
+ .owner = THIS_MODULE,
+ .open = fimc_m2m_open,
+ .release = fimc_m2m_release,
+ .poll = fimc_m2m_poll,
+ .ioctl = video_ioctl2,
+ .mmap = fimc_m2m_mmap,
+};
+
+static struct v4l2_m2m_ops m2m_ops = {
+ .device_run = fimc_dma_run,
+ .job_abort = fimc_job_abort,
+};
+
+
+static int fimc_register_m2m_device(struct fimc_dev *fimc)
+{
+ struct video_device *vfd;
+ struct platform_device *pdev;
+ struct v4l2_device *v4l2_dev;
+ int ret = 0;
+
+ if (!fimc)
+ return -ENODEV;
+
+ pdev = fimc->pdev;
+ v4l2_dev = &fimc->m2m.v4l2_dev;
+
+ /* set name if it is empty */
+ if (!v4l2_dev->name[0])
+ snprintf(v4l2_dev->name, sizeof(v4l2_dev->name),
+ "%s.m2m", dev_name(&pdev->dev));
+
+ ret = v4l2_device_register(&pdev->dev, v4l2_dev);
+ if (ret)
+ return ret;;
+
+ vfd = video_device_alloc();
+ if (!vfd) {
+ v4l2_err(v4l2_dev, "Failed to allocate video device\n");
+ goto err_m2m_r1;
+ }
+
+ vfd->fops = &fimc_m2m_fops;
+ vfd->ioctl_ops = &fimc_m2m_ioctl_ops;
+ vfd->minor = -1;
+ vfd->release = video_device_release;
+
+ snprintf(vfd->name, sizeof(vfd->name), "%s:m2m", dev_name(&pdev->dev));
+
+ video_set_drvdata(vfd, fimc);
+ platform_set_drvdata(pdev, fimc);
+
+ fimc->m2m.vfd = vfd;
+ fimc->m2m.m2m_dev = v4l2_m2m_init(&m2m_ops);
+ if (IS_ERR(fimc->m2m.m2m_dev)) {
+ v4l2_err(v4l2_dev, "failed to initialize v4l2-m2m device\n");
+ ret = PTR_ERR(fimc->m2m.m2m_dev);
+ goto err_m2m_r2;
+ }
+
+ ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1);
+ if (ret) {
+ v4l2_err(v4l2_dev,
+ "%s(): failed to register video device\n", __func__);
+ goto err_m2m_r3;
+ }
+ v4l2_info(v4l2_dev,
+ "FIMC m2m driver registered as /dev/video%d\n", vfd->num);
+
+ return 0;
+
+err_m2m_r3:
+ v4l2_m2m_release(fimc->m2m.m2m_dev);
+err_m2m_r2:
+ video_device_release(fimc->m2m.vfd);
+err_m2m_r1:
+ v4l2_device_unregister(v4l2_dev);
+
+ return ret;
+}
+
+static void fimc_unregister_m2m_device(struct fimc_dev *fimc)
+{
+ if (fimc) {
+ v4l2_m2m_release(fimc->m2m.m2m_dev);
+ video_unregister_device(fimc->m2m.vfd);
+ video_device_release(fimc->m2m.vfd);
+ v4l2_device_unregister(&fimc->m2m.v4l2_dev);
+ }
+}
+
+static void fimc_clk_release(struct fimc_dev *fimc)
+{
+ int i;
+ for (i = 0; i < NUM_FIMC_CLOCKS; i++) {
+ if (fimc->clock[i]) {
+ clk_disable(fimc->clock[i]);
+ clk_put(fimc->clock[i]);
+ }
+ }
+}
+
+static int fimc_clk_get(struct fimc_dev *fimc)
+{
+ int i;
+ for (i = 0; i < NUM_FIMC_CLOCKS; i++) {
+ fimc->clock[i] = clk_get(&fimc->pdev->dev, fimc_clock_name[i]);
+ if (IS_ERR(fimc->clock[i])) {
+ dev_err(&fimc->pdev->dev,
+ "failed to get fimc clock: %s\n",
+ fimc_clock_name[i]);
+ return -ENXIO;
+ }
+ clk_enable(fimc->clock[i]);
+ }
+ return 0;
+}
+
+static int fimc_probe(struct platform_device *pdev)
+{
+ struct fimc_dev *fimc;
+ struct resource *res;
+ struct samsung_fimc_driverdata *drv_data;
+ int ret = 0;
+
+ dev_dbg(&pdev->dev, "%s():\n", __func__);
+
+ drv_data = (struct samsung_fimc_driverdata *)
+ platform_get_device_id(pdev)->driver_data;
+
+ if (pdev->id >= drv_data->devs_cnt) {
+ dev_err(&pdev->dev, "Invalid platform device id: %d\n",
+ pdev->id);
+ return -EINVAL;
+ }
+
+ fimc = kzalloc(sizeof(struct fimc_dev), GFP_KERNEL);
+ if (!fimc)
+ return -ENOMEM;
+
+ fimc->id = pdev->id;
+ fimc->variant = drv_data->variant[fimc->id];
+ fimc->pdev = pdev;
+ fimc->state = ST_IDLE;
+
+ spin_lock_init(&fimc->irqlock);
+ spin_lock_init(&fimc->slock);
+
+ mutex_init(&fimc->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to find the registers\n");
+ ret = -ENOENT;
+ goto err_info;
+ }
+
+ fimc->regs_res = request_mem_region(res->start, resource_size(res),
+ dev_name(&pdev->dev));
+ if (!fimc->regs_res) {
+ dev_err(&pdev->dev, "failed to obtain register region\n");
+ ret = -ENOENT;
+ goto err_info;
+ }
+
+ fimc->regs = ioremap(res->start, resource_size(res));
+ if (!fimc->regs) {
+ dev_err(&pdev->dev, "failed to map registers\n");
+ ret = -ENXIO;
+ goto err_req_region;
+ }
+
+ ret = fimc_clk_get(fimc);
+ if (ret)
+ goto err_regs_unmap;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get IRQ resource\n");
+ ret = -ENXIO;
+ goto err_clk;
+ }
+ fimc->irq = res->start;
+
+ fimc_hw_reset(fimc);
+
+ ret = request_irq(fimc->irq, fimc_isr, 0, pdev->name, fimc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to install irq (%d)\n", ret);
+ goto err_clk;
+ }
+
+ fimc->work_queue = create_workqueue(dev_name(&fimc->pdev->dev));
+ if (!fimc->work_queue)
+ goto err_irq;
+
+ ret = fimc_register_m2m_device(fimc);
+ if (ret)
+ goto err_wq;
+
+ fimc_hw_en_lastirq(fimc, true);
+
+ dev_dbg(&pdev->dev, "%s(): fimc-%d registered successfully\n",
+ __func__, fimc->id);
+
+ return 0;
+
+err_wq:
+ destroy_workqueue(fimc->work_queue);
+err_irq:
+ free_irq(fimc->irq, fimc);
+err_clk:
+ fimc_clk_release(fimc);
+err_regs_unmap:
+ iounmap(fimc->regs);
+err_req_region:
+ release_resource(fimc->regs_res);
+ kfree(fimc->regs_res);
+err_info:
+ kfree(fimc);
+ dev_err(&pdev->dev, "failed to install\n");
+ return ret;
+}
+
+static int __devexit fimc_remove(struct platform_device *pdev)
+{
+ struct fimc_dev *fimc =
+ (struct fimc_dev *)platform_get_drvdata(pdev);
+
+ v4l2_info(&fimc->m2m.v4l2_dev, "Removing %s\n", pdev->name);
+
+ free_irq(fimc->irq, fimc);
+
+ fimc_hw_reset(fimc);
+
+ fimc_unregister_m2m_device(fimc);
+ fimc_clk_release(fimc);
+ iounmap(fimc->regs);
+ release_resource(fimc->regs_res);
+ kfree(fimc->regs_res);
+ kfree(fimc);
+ return 0;
+}
+
+static struct samsung_fimc_variant fimc01_variant_s5p = {
+ .has_inp_rot = 1,
+ .has_out_rot = 1,
+ .min_inp_pixsize = 16,
+ .min_out_pixsize = 16,
+
+ .scaler_en_w = 3264,
+ .scaler_dis_w = 8192,
+ .in_rot_en_h = 1920,
+ .in_rot_dis_w = 8192,
+ .out_rot_en_w = 1920,
+ .out_rot_dis_w = 4224,
+};
+
+static struct samsung_fimc_variant fimc2_variant_s5p = {
+ .min_inp_pixsize = 16,
+ .min_out_pixsize = 16,
+
+ .scaler_en_w = 4224,
+ .scaler_dis_w = 8192,
+ .in_rot_en_h = 1920,
+ .in_rot_dis_w = 8192,
+ .out_rot_en_w = 1920,
+ .out_rot_dis_w = 4224,
+};
+
+static struct samsung_fimc_variant fimc01_variant_s5pv210 = {
+ .has_inp_rot = 1,
+ .has_out_rot = 1,
+ .min_inp_pixsize = 16,
+ .min_out_pixsize = 32,
+
+ .scaler_en_w = 4224,
+ .scaler_dis_w = 8192,
+ .in_rot_en_h = 1920,
+ .in_rot_dis_w = 8192,
+ .out_rot_en_w = 1920,
+ .out_rot_dis_w = 4224,
+};
+
+static struct samsung_fimc_variant fimc2_variant_s5pv210 = {
+ .min_inp_pixsize = 16,
+ .min_out_pixsize = 32,
+
+ .scaler_en_w = 1920,
+ .scaler_dis_w = 8192,
+ .in_rot_en_h = 1280,
+ .in_rot_dis_w = 8192,
+ .out_rot_en_w = 1280,
+ .out_rot_dis_w = 1920,
+};
+
+static struct samsung_fimc_driverdata fimc_drvdata_s5p = {
+ .variant = {
+ [0] = &fimc01_variant_s5p,
+ [1] = &fimc01_variant_s5p,
+ [2] = &fimc2_variant_s5p,
+ },
+ .devs_cnt = 3
+};
+
+static struct samsung_fimc_driverdata fimc_drvdata_s5pv210 = {
+ .variant = {
+ [0] = &fimc01_variant_s5pv210,
+ [1] = &fimc01_variant_s5pv210,
+ [2] = &fimc2_variant_s5pv210,
+ },
+ .devs_cnt = 3
+};
+
+static struct platform_device_id fimc_driver_ids[] = {
+ {
+ .name = "s5p-fimc",
+ .driver_data = (unsigned long)&fimc_drvdata_s5p,
+ }, {
+ .name = "s5pv210-fimc",
+ .driver_data = (unsigned long)&fimc_drvdata_s5pv210,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, fimc_driver_ids);
+
+static struct platform_driver fimc_driver = {
+ .probe = fimc_probe,
+ .remove = __devexit_p(fimc_remove),
+ .id_table = fimc_driver_ids,
+ .driver = {
+ .name = MODULE_NAME,
+ .owner = THIS_MODULE,
+ }
+};
+
+static char banner[] __initdata = KERN_INFO
+ "S5PC Camera Interface V4L2 Driver, (c) 2010 Samsung Electronics\n";
+
+static int __init fimc_init(void)
+{
+ u32 ret;
+ printk(banner);
+
+ ret = platform_driver_register(&fimc_driver);
+ if (ret) {
+ printk(KERN_ERR "FIMC platform driver register failed\n");
+ return -1;
+ }
+ return 0;
+}
+
+static void __exit fimc_exit(void)
+{
+ platform_driver_unregister(&fimc_driver);
+}
+
+module_init(fimc_init);
+module_exit(fimc_exit);
+
+MODULE_AUTHOR("Sylwester Nawrocki, s.nawrocki@samsung.com");
+MODULE_DESCRIPTION("S3C/S5P FIMC (video postprocessor) driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef FIMC_CORE_H_
+#define FIMC_CORE_H_
+
+#include <linux/types.h>
+#include <media/videobuf-core.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-mem2mem.h>
+#include <linux/videodev2.h>
+#include "regs-fimc.h"
+
+#define err(fmt, args...) \
+ printk(KERN_ERR "%s:%d: " fmt "\n", __func__, __LINE__, ##args)
+
+#ifdef DEBUG
+#define dbg(fmt, args...) \
+ printk(KERN_DEBUG "%s:%d: " fmt "\n", __func__, __LINE__, ##args)
+#else
+#define dbg(fmt, args...)
+#endif
+
+#define NUM_FIMC_CLOCKS 2
+#define MODULE_NAME "s5p-fimc"
+#define FIMC_MAX_DEVS 3
+#define FIMC_MAX_OUT_BUFS 4
+#define SCALER_MAX_HRATIO 64
+#define SCALER_MAX_VRATIO 64
+
+enum {
+ ST_IDLE,
+ ST_OUTDMA_RUN,
+ ST_M2M_PEND,
+};
+
+#define fimc_m2m_active(dev) test_bit(ST_OUTDMA_RUN, &(dev)->state)
+#define fimc_m2m_pending(dev) test_bit(ST_M2M_PEND, &(dev)->state)
+
+enum fimc_datapath {
+ FIMC_ITU_CAM_A,
+ FIMC_ITU_CAM_B,
+ FIMC_MIPI_CAM,
+ FIMC_DMA,
+ FIMC_LCDFIFO,
+ FIMC_WRITEBACK
+};
+
+enum fimc_color_fmt {
+ S5P_FIMC_RGB565,
+ S5P_FIMC_RGB666,
+ S5P_FIMC_RGB888,
+ S5P_FIMC_YCBCR420,
+ S5P_FIMC_YCBCR422,
+ S5P_FIMC_YCBYCR422,
+ S5P_FIMC_YCRYCB422,
+ S5P_FIMC_CBYCRY422,
+ S5P_FIMC_CRYCBY422,
+ S5P_FIMC_RGB30_LOCAL,
+ S5P_FIMC_YCBCR444_LOCAL,
+ S5P_FIMC_MAX_COLOR = S5P_FIMC_YCBCR444_LOCAL,
+ S5P_FIMC_COLOR_MASK = 0x0F,
+};
+
+/* Y/Cb/Cr components order at DMA output for 1 plane YCbCr 4:2:2 formats. */
+#define S5P_FIMC_OUT_CRYCBY S5P_CIOCTRL_ORDER422_CRYCBY
+#define S5P_FIMC_OUT_CBYCRY S5P_CIOCTRL_ORDER422_YCRYCB
+#define S5P_FIMC_OUT_YCRYCB S5P_CIOCTRL_ORDER422_CBYCRY
+#define S5P_FIMC_OUT_YCBYCR S5P_CIOCTRL_ORDER422_YCBYCR
+
+/* Input Y/Cb/Cr components order for 1 plane YCbCr 4:2:2 color formats. */
+#define S5P_FIMC_IN_CRYCBY S5P_MSCTRL_ORDER422_CRYCBY
+#define S5P_FIMC_IN_CBYCRY S5P_MSCTRL_ORDER422_YCRYCB
+#define S5P_FIMC_IN_YCRYCB S5P_MSCTRL_ORDER422_CBYCRY
+#define S5P_FIMC_IN_YCBYCR S5P_MSCTRL_ORDER422_YCBYCR
+
+/* Cb/Cr chrominance components order for 2 plane Y/CbCr 4:2:2 formats. */
+#define S5P_FIMC_LSB_CRCB S5P_CIOCTRL_ORDER422_2P_LSB_CRCB
+
+/* The embedded image effect selection */
+#define S5P_FIMC_EFFECT_ORIGINAL S5P_CIIMGEFF_FIN_BYPASS
+#define S5P_FIMC_EFFECT_ARBITRARY S5P_CIIMGEFF_FIN_ARBITRARY
+#define S5P_FIMC_EFFECT_NEGATIVE S5P_CIIMGEFF_FIN_NEGATIVE
+#define S5P_FIMC_EFFECT_ARTFREEZE S5P_CIIMGEFF_FIN_ARTFREEZE
+#define S5P_FIMC_EFFECT_EMBOSSING S5P_CIIMGEFF_FIN_EMBOSSING
+#define S5P_FIMC_EFFECT_SIKHOUETTE S5P_CIIMGEFF_FIN_SILHOUETTE
+
+/* The hardware context state. */
+#define FIMC_PARAMS (1 << 0)
+#define FIMC_SRC_ADDR (1 << 1)
+#define FIMC_DST_ADDR (1 << 2)
+#define FIMC_SRC_FMT (1 << 3)
+#define FIMC_DST_FMT (1 << 4)
+
+/* Image conversion flags */
+#define FIMC_IN_DMA_ACCESS_TILED (1 << 0)
+#define FIMC_IN_DMA_ACCESS_LINEAR (0 << 0)
+#define FIMC_OUT_DMA_ACCESS_TILED (1 << 1)
+#define FIMC_OUT_DMA_ACCESS_LINEAR (0 << 1)
+#define FIMC_SCAN_MODE_PROGRESSIVE (0 << 2)
+#define FIMC_SCAN_MODE_INTERLACED (1 << 2)
+/* YCbCr data dynamic range for RGB-YUV color conversion. Y/Cb/Cr: (0 ~ 255) */
+#define FIMC_COLOR_RANGE_WIDE (0 << 3)
+/* Y (16 ~ 235), Cb/Cr (16 ~ 240) */
+#define FIMC_COLOR_RANGE_NARROW (1 << 3)
+
+#define FLIP_NONE 0
+#define FLIP_X_AXIS 1
+#define FLIP_Y_AXIS 2
+#define FLIP_XY_AXIS (FLIP_X_AXIS | FLIP_Y_AXIS)
+
+/**
+ * struct fimc_fmt - the driver's internal color format data
+ * @name: format description
+ * @fourcc: the fourcc code for this format
+ * @color: the corresponding fimc_color_fmt
+ * @depth: number of bits per pixel
+ * @buff_cnt: number of physically non-contiguous data planes
+ * @planes_cnt: number of physically contiguous data planes
+ */
+struct fimc_fmt {
+ char *name;
+ u32 fourcc;
+ u32 color;
+ u32 depth;
+ u16 buff_cnt;
+ u16 planes_cnt;
+};
+
+/**
+ * struct fimc_dma_offset - pixel offset information for DMA
+ * @y_h: y value horizontal offset
+ * @y_v: y value vertical offset
+ * @cb_h: cb value horizontal offset
+ * @cb_v: cb value vertical offset
+ * @cr_h: cr value horizontal offset
+ * @cr_v: cr value vertical offset
+ */
+struct fimc_dma_offset {
+ int y_h;
+ int y_v;
+ int cb_h;
+ int cb_v;
+ int cr_h;
+ int cr_v;
+};
+
+/**
+ * struct fimc_effect - the configuration data for the "Arbitrary" image effect
+ * @type: effect type
+ * @pat_cb: cr value when type is "arbitrary"
+ * @pat_cr: cr value when type is "arbitrary"
+ */
+struct fimc_effect {
+ u32 type;
+ u8 pat_cb;
+ u8 pat_cr;
+};
+
+/**
+ * struct fimc_scaler - the configuration data for FIMC inetrnal scaler
+ *
+ * @enabled: the flag set when the scaler is used
+ * @hfactor: horizontal shift factor
+ * @vfactor: vertical shift factor
+ * @pre_hratio: horizontal ratio of the prescaler
+ * @pre_vratio: vertical ratio of the prescaler
+ * @pre_dst_width: the prescaler's destination width
+ * @pre_dst_height: the prescaler's destination height
+ * @scaleup_h: flag indicating scaling up horizontally
+ * @scaleup_v: flag indicating scaling up vertically
+ * @main_hratio: the main scaler's horizontal ratio
+ * @main_vratio: the main scaler's vertical ratio
+ * @real_width: source width - offset
+ * @real_height: source height - offset
+ * @copy_mode: flag set if one-to-one mode is used, i.e. no scaling
+ * and color format conversion
+ */
+struct fimc_scaler {
+ u32 enabled;
+ u32 hfactor;
+ u32 vfactor;
+ u32 pre_hratio;
+ u32 pre_vratio;
+ u32 pre_dst_width;
+ u32 pre_dst_height;
+ u32 scaleup_h;
+ u32 scaleup_v;
+ u32 main_hratio;
+ u32 main_vratio;
+ u32 real_width;
+ u32 real_height;
+ u32 copy_mode;
+};
+
+/**
+ * struct fimc_addr - the FIMC physical address set for DMA
+ *
+ * @y: luminance plane physical address
+ * @cb: Cb plane physical address
+ * @cr: Cr plane physical address
+ */
+struct fimc_addr {
+ u32 y;
+ u32 cb;
+ u32 cr;
+};
+
+/**
+ * struct fimc_vid_buffer - the driver's video buffer
+ * @vb: v4l videobuf buffer
+ */
+struct fimc_vid_buffer {
+ struct videobuf_buffer vb;
+};
+
+/**
+ * struct fimc_frame - input/output frame format properties
+ *
+ * @f_width: image full width (virtual screen size)
+ * @f_height: image full height (virtual screen size)
+ * @o_width: original image width as set by S_FMT
+ * @o_height: original image height as set by S_FMT
+ * @offs_h: image horizontal pixel offset
+ * @offs_v: image vertical pixel offset
+ * @width: image pixel width
+ * @height: image pixel weight
+ * @paddr: image frame buffer physical addresses
+ * @buf_cnt: number of buffers depending on a color format
+ * @size: image size in bytes
+ * @color: color format
+ * @dma_offset: DMA offset in bytes
+ */
+struct fimc_frame {
+ u32 f_width;
+ u32 f_height;
+ u32 o_width;
+ u32 o_height;
+ u32 offs_h;
+ u32 offs_v;
+ u32 width;
+ u32 height;
+ u32 size;
+ struct fimc_addr paddr;
+ struct fimc_dma_offset dma_offset;
+ struct fimc_fmt *fmt;
+};
+
+/**
+ * struct fimc_m2m_device - v4l2 memory-to-memory device data
+ * @vfd: the video device node for v4l2 m2m mode
+ * @v4l2_dev: v4l2 device for m2m mode
+ * @m2m_dev: v4l2 memory-to-memory device data
+ * @ctx: hardware context data
+ * @refcnt: the reference counter
+ */
+struct fimc_m2m_device {
+ struct video_device *vfd;
+ struct v4l2_device v4l2_dev;
+ struct v4l2_m2m_dev *m2m_dev;
+ struct fimc_ctx *ctx;
+ int refcnt;
+};
+
+/**
+ * struct samsung_fimc_variant - camera interface variant information
+ *
+ * @pix_hoff: indicate whether horizontal offset is in pixels or in bytes
+ * @has_inp_rot: set if has input rotator
+ * @has_out_rot: set if has output rotator
+ * @min_inp_pixsize: minimum input pixel size
+ * @min_out_pixsize: minimum output pixel size
+ * @scaler_en_w: maximum input pixel width when the scaler is enabled
+ * @scaler_dis_w: maximum input pixel width when the scaler is disabled
+ * @in_rot_en_h: maximum input width when the input rotator is used
+ * @in_rot_dis_w: maximum input width when the input rotator is used
+ * @out_rot_en_w: maximum output width for the output rotator enabled
+ * @out_rot_dis_w: maximum output width for the output rotator enabled
+ */
+struct samsung_fimc_variant {
+ unsigned int pix_hoff:1;
+ unsigned int has_inp_rot:1;
+ unsigned int has_out_rot:1;
+
+ u16 min_inp_pixsize;
+ u16 min_out_pixsize;
+ u16 scaler_en_w;
+ u16 scaler_dis_w;
+ u16 in_rot_en_h;
+ u16 in_rot_dis_w;
+ u16 out_rot_en_w;
+ u16 out_rot_dis_w;
+};
+
+/**
+ * struct samsung_fimc_driverdata - per-device type driver data for init time.
+ *
+ * @variant: the variant information for this driver.
+ * @dev_cnt: number of fimc sub-devices available in SoC
+ */
+struct samsung_fimc_driverdata {
+ struct samsung_fimc_variant *variant[FIMC_MAX_DEVS];
+ int devs_cnt;
+};
+
+struct fimc_ctx;
+
+/**
+ * struct fimc_subdev - abstraction for a FIMC entity
+ *
+ * @slock: the spinlock protecting this data structure
+ * @lock: the mutex protecting this data structure
+ * @pdev: pointer to the FIMC platform device
+ * @id: FIMC device index (0..2)
+ * @clock[]: the clocks required for FIMC operation
+ * @regs: the mapped hardware registers
+ * @regs_res: the resource claimed for IO registers
+ * @irq: interrupt number of the FIMC subdevice
+ * @irqlock: spinlock protecting videbuffer queue
+ * @m2m: memory-to-memory V4L2 device information
+ * @state: the FIMC device state flags
+ */
+struct fimc_dev {
+ spinlock_t slock;
+ struct mutex lock;
+ struct platform_device *pdev;
+ struct samsung_fimc_variant *variant;
+ int id;
+ struct clk *clock[NUM_FIMC_CLOCKS];
+ void __iomem *regs;
+ struct resource *regs_res;
+ int irq;
+ spinlock_t irqlock;
+ struct workqueue_struct *work_queue;
+ struct fimc_m2m_device m2m;
+ unsigned long state;
+};
+
+/**
+ * fimc_ctx - the device context data
+ *
+ * @lock: mutex protecting this data structure
+ * @s_frame: source frame properties
+ * @d_frame: destination frame properties
+ * @out_order_1p: output 1-plane YCBCR order
+ * @out_order_2p: output 2-plane YCBCR order
+ * @in_order_1p input 1-plane YCBCR order
+ * @in_order_2p: input 2-plane YCBCR order
+ * @in_path: input mode (DMA or camera)
+ * @out_path: output mode (DMA or FIFO)
+ * @scaler: image scaler properties
+ * @effect: image effect
+ * @rotation: image clockwise rotation in degrees
+ * @flip: image flip mode
+ * @flags: an additional flags for image conversion
+ * @state: flags to keep track of user configuration
+ * @fimc_dev: the FIMC device this context applies to
+ * @m2m_ctx: memory-to-memory device context
+ */
+struct fimc_ctx {
+ spinlock_t slock;
+ struct fimc_frame s_frame;
+ struct fimc_frame d_frame;
+ u32 out_order_1p;
+ u32 out_order_2p;
+ u32 in_order_1p;
+ u32 in_order_2p;
+ enum fimc_datapath in_path;
+ enum fimc_datapath out_path;
+ struct fimc_scaler scaler;
+ struct fimc_effect effect;
+ int rotation;
+ u32 flip;
+ u32 flags;
+ u32 state;
+ struct fimc_dev *fimc_dev;
+ struct v4l2_m2m_ctx *m2m_ctx;
+};
+
+
+static inline int tiled_fmt(struct fimc_fmt *fmt)
+{
+ return 0;
+}
+
+static inline void fimc_hw_clear_irq(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_CIGCTRL);
+ cfg |= S5P_CIGCTRL_IRQ_CLR;
+ writel(cfg, dev->regs + S5P_CIGCTRL);
+}
+
+static inline void fimc_hw_start_scaler(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_CISCCTRL);
+ cfg |= S5P_CISCCTRL_SCALERSTART;
+ writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+static inline void fimc_hw_stop_scaler(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_CISCCTRL);
+ cfg &= ~S5P_CISCCTRL_SCALERSTART;
+ writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+static inline void fimc_hw_dis_capture(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_CIIMGCPT);
+ cfg &= ~(S5P_CIIMGCPT_IMGCPTEN | S5P_CIIMGCPT_IMGCPTEN_SC);
+ writel(cfg, dev->regs + S5P_CIIMGCPT);
+}
+
+static inline void fimc_hw_start_in_dma(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_MSCTRL);
+ cfg |= S5P_MSCTRL_ENVID;
+ writel(cfg, dev->regs + S5P_MSCTRL);
+}
+
+static inline void fimc_hw_stop_in_dma(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_MSCTRL);
+ cfg &= ~S5P_MSCTRL_ENVID;
+ writel(cfg, dev->regs + S5P_MSCTRL);
+}
+
+static inline struct fimc_frame *ctx_m2m_get_frame(struct fimc_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ struct fimc_frame *frame;
+
+ if (V4L2_BUF_TYPE_VIDEO_OUTPUT == type) {
+ frame = &ctx->s_frame;
+ } else if (V4L2_BUF_TYPE_VIDEO_CAPTURE == type) {
+ frame = &ctx->d_frame;
+ } else {
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+ "Wrong buffer/video queue type (%d)\n", type);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return frame;
+}
+
+/* -----------------------------------------------------*/
+/* fimc-reg.c */
+void fimc_hw_reset(struct fimc_dev *dev);
+void fimc_hw_set_rotation(struct fimc_ctx *ctx);
+void fimc_hw_set_target_format(struct fimc_ctx *ctx);
+void fimc_hw_set_out_dma(struct fimc_ctx *ctx);
+void fimc_hw_en_lastirq(struct fimc_dev *dev, int enable);
+void fimc_hw_en_irq(struct fimc_dev *dev, int enable);
+void fimc_hw_set_prescaler(struct fimc_ctx *ctx);
+void fimc_hw_set_scaler(struct fimc_ctx *ctx);
+void fimc_hw_en_capture(struct fimc_ctx *ctx);
+void fimc_hw_set_effect(struct fimc_ctx *ctx);
+void fimc_hw_set_in_dma(struct fimc_ctx *ctx);
+void fimc_hw_set_input_path(struct fimc_ctx *ctx);
+void fimc_hw_set_output_path(struct fimc_ctx *ctx);
+void fimc_hw_set_input_addr(struct fimc_dev *dev, struct fimc_addr *paddr);
+void fimc_hw_set_output_addr(struct fimc_dev *dev, struct fimc_addr *paddr);
+
+#endif /* FIMC_CORE_H_ */
--- /dev/null
+/*
+ * Register interface file for Samsung Camera Interface (FIMC) driver
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Sylwester Nawrocki, s.nawrocki@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <mach/map.h>
+
+#include "fimc-core.h"
+
+
+void fimc_hw_reset(struct fimc_dev *dev)
+{
+ u32 cfg;
+
+ cfg = readl(dev->regs + S5P_CISRCFMT);
+ cfg |= S5P_CISRCFMT_ITU601_8BIT;
+ writel(cfg, dev->regs + S5P_CISRCFMT);
+
+ /* Software reset. */
+ cfg = readl(dev->regs + S5P_CIGCTRL);
+ cfg |= (S5P_CIGCTRL_SWRST | S5P_CIGCTRL_IRQ_LEVEL);
+ writel(cfg, dev->regs + S5P_CIGCTRL);
+ msleep(1);
+
+ cfg = readl(dev->regs + S5P_CIGCTRL);
+ cfg &= ~S5P_CIGCTRL_SWRST;
+ writel(cfg, dev->regs + S5P_CIGCTRL);
+
+}
+
+void fimc_hw_set_rotation(struct fimc_ctx *ctx)
+{
+ u32 cfg, flip;
+ struct fimc_dev *dev = ctx->fimc_dev;
+
+ cfg = readl(dev->regs + S5P_CITRGFMT);
+ cfg &= ~(S5P_CITRGFMT_INROT90 | S5P_CITRGFMT_OUTROT90);
+
+ flip = readl(dev->regs + S5P_MSCTRL);
+ flip &= ~S5P_MSCTRL_FLIP_MASK;
+
+ /*
+ * The input and output rotator cannot work simultaneously.
+ * Use the output rotator in output DMA mode or the input rotator
+ * in direct fifo output mode.
+ */
+ if (ctx->rotation == 90 || ctx->rotation == 270) {
+ if (ctx->out_path == FIMC_LCDFIFO) {
+ cfg |= S5P_CITRGFMT_INROT90;
+ if (ctx->rotation == 270)
+ flip |= S5P_MSCTRL_FLIP_180;
+ } else {
+ cfg |= S5P_CITRGFMT_OUTROT90;
+ if (ctx->rotation == 270)
+ cfg |= S5P_CITRGFMT_FLIP_180;
+ }
+ } else if (ctx->rotation == 180) {
+ if (ctx->out_path == FIMC_LCDFIFO)
+ flip |= S5P_MSCTRL_FLIP_180;
+ else
+ cfg |= S5P_CITRGFMT_FLIP_180;
+ }
+ if (ctx->rotation == 180 || ctx->rotation == 270)
+ writel(flip, dev->regs + S5P_MSCTRL);
+ writel(cfg, dev->regs + S5P_CITRGFMT);
+}
+
+static u32 fimc_hw_get_in_flip(u32 ctx_flip)
+{
+ u32 flip = S5P_MSCTRL_FLIP_NORMAL;
+
+ switch (ctx_flip) {
+ case FLIP_X_AXIS:
+ flip = S5P_MSCTRL_FLIP_X_MIRROR;
+ break;
+ case FLIP_Y_AXIS:
+ flip = S5P_MSCTRL_FLIP_Y_MIRROR;
+ break;
+ case FLIP_XY_AXIS:
+ flip = S5P_MSCTRL_FLIP_180;
+ break;
+ }
+
+ return flip;
+}
+
+static u32 fimc_hw_get_target_flip(u32 ctx_flip)
+{
+ u32 flip = S5P_CITRGFMT_FLIP_NORMAL;
+
+ switch (ctx_flip) {
+ case FLIP_X_AXIS:
+ flip = S5P_CITRGFMT_FLIP_X_MIRROR;
+ break;
+ case FLIP_Y_AXIS:
+ flip = S5P_CITRGFMT_FLIP_Y_MIRROR;
+ break;
+ case FLIP_XY_AXIS:
+ flip = S5P_CITRGFMT_FLIP_180;
+ break;
+ case FLIP_NONE:
+ break;
+
+ }
+ return flip;
+}
+
+void fimc_hw_set_target_format(struct fimc_ctx *ctx)
+{
+ u32 cfg;
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_frame *frame = &ctx->d_frame;
+
+ dbg("w= %d, h= %d color: %d", frame->width,
+ frame->height, frame->fmt->color);
+
+ cfg = readl(dev->regs + S5P_CITRGFMT);
+ cfg &= ~(S5P_CITRGFMT_FMT_MASK | S5P_CITRGFMT_HSIZE_MASK |
+ S5P_CITRGFMT_VSIZE_MASK);
+
+ switch (frame->fmt->color) {
+ case S5P_FIMC_RGB565:
+ case S5P_FIMC_RGB666:
+ case S5P_FIMC_RGB888:
+ cfg |= S5P_CITRGFMT_RGB;
+ break;
+ case S5P_FIMC_YCBCR420:
+ cfg |= S5P_CITRGFMT_YCBCR420;
+ break;
+ case S5P_FIMC_YCBYCR422:
+ case S5P_FIMC_YCRYCB422:
+ case S5P_FIMC_CBYCRY422:
+ case S5P_FIMC_CRYCBY422:
+ if (frame->fmt->planes_cnt == 1)
+ cfg |= S5P_CITRGFMT_YCBCR422_1P;
+ else
+ cfg |= S5P_CITRGFMT_YCBCR422;
+ break;
+ default:
+ break;
+ }
+
+ cfg |= S5P_CITRGFMT_HSIZE(frame->width);
+ cfg |= S5P_CITRGFMT_VSIZE(frame->height);
+
+ if (ctx->rotation == 0) {
+ cfg &= ~S5P_CITRGFMT_FLIP_MASK;
+ cfg |= fimc_hw_get_target_flip(ctx->flip);
+ }
+ writel(cfg, dev->regs + S5P_CITRGFMT);
+
+ cfg = readl(dev->regs + S5P_CITAREA) & ~S5P_CITAREA_MASK;
+ cfg |= (frame->width * frame->height);
+ writel(cfg, dev->regs + S5P_CITAREA);
+}
+
+static void fimc_hw_set_out_dma_size(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_frame *frame = &ctx->d_frame;
+ u32 cfg = 0;
+
+ if (ctx->rotation == 90 || ctx->rotation == 270) {
+ cfg |= S5P_ORIG_SIZE_HOR(frame->f_height);
+ cfg |= S5P_ORIG_SIZE_VER(frame->f_width);
+ } else {
+ cfg |= S5P_ORIG_SIZE_HOR(frame->f_width);
+ cfg |= S5P_ORIG_SIZE_VER(frame->f_height);
+ }
+ writel(cfg, dev->regs + S5P_ORGOSIZE);
+}
+
+void fimc_hw_set_out_dma(struct fimc_ctx *ctx)
+{
+ u32 cfg;
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_frame *frame = &ctx->d_frame;
+ struct fimc_dma_offset *offset = &frame->dma_offset;
+
+ /* Set the input dma offsets. */
+ cfg = 0;
+ cfg |= S5P_CIO_OFFS_HOR(offset->y_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->y_v);
+ writel(cfg, dev->regs + S5P_CIOYOFF);
+
+ cfg = 0;
+ cfg |= S5P_CIO_OFFS_HOR(offset->cb_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->cb_v);
+ writel(cfg, dev->regs + S5P_CIOCBOFF);
+
+ cfg = 0;
+ cfg |= S5P_CIO_OFFS_HOR(offset->cr_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->cr_v);
+ writel(cfg, dev->regs + S5P_CIOCROFF);
+
+ fimc_hw_set_out_dma_size(ctx);
+
+ /* Configure chroma components order. */
+ cfg = readl(dev->regs + S5P_CIOCTRL);
+
+ cfg &= ~(S5P_CIOCTRL_ORDER2P_MASK | S5P_CIOCTRL_ORDER422_MASK |
+ S5P_CIOCTRL_YCBCR_PLANE_MASK);
+
+ if (frame->fmt->planes_cnt == 1)
+ cfg |= ctx->out_order_1p;
+ else if (frame->fmt->planes_cnt == 2)
+ cfg |= ctx->out_order_2p | S5P_CIOCTRL_YCBCR_2PLANE;
+ else if (frame->fmt->planes_cnt == 3)
+ cfg |= S5P_CIOCTRL_YCBCR_3PLANE;
+
+ writel(cfg, dev->regs + S5P_CIOCTRL);
+}
+
+static void fimc_hw_en_autoload(struct fimc_dev *dev, int enable)
+{
+ u32 cfg = readl(dev->regs + S5P_ORGISIZE);
+ if (enable)
+ cfg |= S5P_CIREAL_ISIZE_AUTOLOAD_EN;
+ else
+ cfg &= ~S5P_CIREAL_ISIZE_AUTOLOAD_EN;
+ writel(cfg, dev->regs + S5P_ORGISIZE);
+}
+
+void fimc_hw_en_lastirq(struct fimc_dev *dev, int enable)
+{
+ unsigned long flags;
+ u32 cfg;
+
+ spin_lock_irqsave(&dev->slock, flags);
+
+ cfg = readl(dev->regs + S5P_CIOCTRL);
+ if (enable)
+ cfg |= S5P_CIOCTRL_LASTIRQ_ENABLE;
+ else
+ cfg &= ~S5P_CIOCTRL_LASTIRQ_ENABLE;
+ writel(cfg, dev->regs + S5P_CIOCTRL);
+
+ spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+void fimc_hw_set_prescaler(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_scaler *sc = &ctx->scaler;
+ u32 cfg = 0, shfactor;
+
+ shfactor = 10 - (sc->hfactor + sc->vfactor);
+
+ cfg |= S5P_CISCPRERATIO_SHFACTOR(shfactor);
+ cfg |= S5P_CISCPRERATIO_HOR(sc->pre_hratio);
+ cfg |= S5P_CISCPRERATIO_VER(sc->pre_vratio);
+ writel(cfg, dev->regs + S5P_CISCPRERATIO);
+
+ cfg = 0;
+ cfg |= S5P_CISCPREDST_WIDTH(sc->pre_dst_width);
+ cfg |= S5P_CISCPREDST_HEIGHT(sc->pre_dst_height);
+ writel(cfg, dev->regs + S5P_CISCPREDST);
+}
+
+void fimc_hw_set_scaler(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_scaler *sc = &ctx->scaler;
+ struct fimc_frame *src_frame = &ctx->s_frame;
+ struct fimc_frame *dst_frame = &ctx->d_frame;
+ u32 cfg = 0;
+
+ if (!(ctx->flags & FIMC_COLOR_RANGE_NARROW))
+ cfg |= (S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE);
+
+ if (!sc->enabled)
+ cfg |= S5P_CISCCTRL_SCALERBYPASS;
+
+ if (sc->scaleup_h)
+ cfg |= S5P_CISCCTRL_SCALEUP_H;
+
+ if (sc->scaleup_v)
+ cfg |= S5P_CISCCTRL_SCALEUP_V;
+
+ if (sc->copy_mode)
+ cfg |= S5P_CISCCTRL_ONE2ONE;
+
+
+ if (ctx->in_path == FIMC_DMA) {
+ if (src_frame->fmt->color == S5P_FIMC_RGB565)
+ cfg |= S5P_CISCCTRL_INRGB_FMT_RGB565;
+ else if (src_frame->fmt->color == S5P_FIMC_RGB666)
+ cfg |= S5P_CISCCTRL_INRGB_FMT_RGB666;
+ else if (src_frame->fmt->color == S5P_FIMC_RGB888)
+ cfg |= S5P_CISCCTRL_INRGB_FMT_RGB888;
+ }
+
+ if (ctx->out_path == FIMC_DMA) {
+ if (dst_frame->fmt->color == S5P_FIMC_RGB565)
+ cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB565;
+ else if (dst_frame->fmt->color == S5P_FIMC_RGB666)
+ cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB666;
+ else if (dst_frame->fmt->color == S5P_FIMC_RGB888)
+ cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB888;
+ } else {
+ cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB888;
+
+ if (ctx->flags & FIMC_SCAN_MODE_INTERLACED)
+ cfg |= S5P_CISCCTRL_INTERLACE;
+ }
+
+ dbg("main_hratio= 0x%X main_vratio= 0x%X",
+ sc->main_hratio, sc->main_vratio);
+
+ cfg |= S5P_CISCCTRL_SC_HORRATIO(sc->main_hratio);
+ cfg |= S5P_CISCCTRL_SC_VERRATIO(sc->main_vratio);
+
+ writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+void fimc_hw_en_capture(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ u32 cfg;
+
+ cfg = readl(dev->regs + S5P_CIIMGCPT);
+ /* One shot mode for output DMA or freerun for FIFO. */
+ if (ctx->out_path == FIMC_DMA)
+ cfg |= S5P_CIIMGCPT_CPT_FREN_ENABLE;
+ else
+ cfg &= ~S5P_CIIMGCPT_CPT_FREN_ENABLE;
+
+ if (ctx->scaler.enabled)
+ cfg |= S5P_CIIMGCPT_IMGCPTEN_SC;
+
+ writel(cfg | S5P_CIIMGCPT_IMGCPTEN, dev->regs + S5P_CIIMGCPT);
+}
+
+void fimc_hw_set_effect(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_effect *effect = &ctx->effect;
+ u32 cfg = (S5P_CIIMGEFF_IE_ENABLE | S5P_CIIMGEFF_IE_SC_AFTER);
+
+ cfg |= effect->type;
+
+ if (effect->type == S5P_FIMC_EFFECT_ARBITRARY) {
+ cfg |= S5P_CIIMGEFF_PAT_CB(effect->pat_cb);
+ cfg |= S5P_CIIMGEFF_PAT_CR(effect->pat_cr);
+ }
+
+ writel(cfg, dev->regs + S5P_CIIMGEFF);
+}
+
+static void fimc_hw_set_in_dma_size(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_frame *frame = &ctx->s_frame;
+ u32 cfg_o = 0;
+ u32 cfg_r = 0;
+
+ if (FIMC_LCDFIFO == ctx->out_path)
+ cfg_r |= S5P_CIREAL_ISIZE_AUTOLOAD_EN;
+
+ cfg_o |= S5P_ORIG_SIZE_HOR(frame->f_width);
+ cfg_o |= S5P_ORIG_SIZE_VER(frame->f_height);
+ cfg_r |= S5P_CIREAL_ISIZE_WIDTH(frame->width);
+ cfg_r |= S5P_CIREAL_ISIZE_HEIGHT(frame->height);
+
+ writel(cfg_o, dev->regs + S5P_ORGISIZE);
+ writel(cfg_r, dev->regs + S5P_CIREAL_ISIZE);
+}
+
+void fimc_hw_set_in_dma(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_frame *frame = &ctx->s_frame;
+ struct fimc_dma_offset *offset = &frame->dma_offset;
+ u32 cfg = 0;
+
+ /* Set the pixel offsets. */
+ cfg |= S5P_CIO_OFFS_HOR(offset->y_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->y_v);
+ writel(cfg, dev->regs + S5P_CIIYOFF);
+
+ cfg = 0;
+ cfg |= S5P_CIO_OFFS_HOR(offset->cb_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->cb_v);
+ writel(cfg, dev->regs + S5P_CIICBOFF);
+
+ cfg = 0;
+ cfg |= S5P_CIO_OFFS_HOR(offset->cr_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->cr_v);
+ writel(cfg, dev->regs + S5P_CIICROFF);
+
+ /* Input original and real size. */
+ fimc_hw_set_in_dma_size(ctx);
+
+ /* Autoload is used currently only in FIFO mode. */
+ fimc_hw_en_autoload(dev, ctx->out_path == FIMC_LCDFIFO);
+
+ /* Set the input DMA to process single frame only. */
+ cfg = readl(dev->regs + S5P_MSCTRL);
+ cfg &= ~(S5P_MSCTRL_FLIP_MASK
+ | S5P_MSCTRL_INFORMAT_MASK
+ | S5P_MSCTRL_IN_BURST_COUNT_MASK
+ | S5P_MSCTRL_INPUT_MASK
+ | S5P_MSCTRL_C_INT_IN_MASK
+ | S5P_MSCTRL_2P_IN_ORDER_MASK);
+
+ cfg |= (S5P_MSCTRL_FRAME_COUNT(1) | S5P_MSCTRL_INPUT_MEMORY);
+
+ switch (frame->fmt->color) {
+ case S5P_FIMC_RGB565:
+ case S5P_FIMC_RGB666:
+ case S5P_FIMC_RGB888:
+ cfg |= S5P_MSCTRL_INFORMAT_RGB;
+ break;
+ case S5P_FIMC_YCBCR420:
+ cfg |= S5P_MSCTRL_INFORMAT_YCBCR420;
+
+ if (frame->fmt->planes_cnt == 2)
+ cfg |= ctx->in_order_2p | S5P_MSCTRL_C_INT_IN_2PLANE;
+ else
+ cfg |= S5P_MSCTRL_C_INT_IN_3PLANE;
+
+ break;
+ case S5P_FIMC_YCBYCR422:
+ case S5P_FIMC_YCRYCB422:
+ case S5P_FIMC_CBYCRY422:
+ case S5P_FIMC_CRYCBY422:
+ if (frame->fmt->planes_cnt == 1) {
+ cfg |= ctx->in_order_1p
+ | S5P_MSCTRL_INFORMAT_YCBCR422_1P;
+ } else {
+ cfg |= S5P_MSCTRL_INFORMAT_YCBCR422;
+
+ if (frame->fmt->planes_cnt == 2)
+ cfg |= ctx->in_order_2p
+ | S5P_MSCTRL_C_INT_IN_2PLANE;
+ else
+ cfg |= S5P_MSCTRL_C_INT_IN_3PLANE;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Input DMA flip mode (and rotation).
+ * Do not allow simultaneous rotation and flipping.
+ */
+ if (!ctx->rotation && ctx->out_path == FIMC_LCDFIFO)
+ cfg |= fimc_hw_get_in_flip(ctx->flip);
+
+ writel(cfg, dev->regs + S5P_MSCTRL);
+
+ /* Input/output DMA linear/tiled mode. */
+ cfg = readl(dev->regs + S5P_CIDMAPARAM);
+ cfg &= ~S5P_CIDMAPARAM_TILE_MASK;
+
+ if (tiled_fmt(ctx->s_frame.fmt))
+ cfg |= S5P_CIDMAPARAM_R_64X32;
+
+ if (tiled_fmt(ctx->d_frame.fmt))
+ cfg |= S5P_CIDMAPARAM_W_64X32;
+
+ writel(cfg, dev->regs + S5P_CIDMAPARAM);
+}
+
+
+void fimc_hw_set_input_path(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+
+ u32 cfg = readl(dev->regs + S5P_MSCTRL);
+ cfg &= ~S5P_MSCTRL_INPUT_MASK;
+
+ if (ctx->in_path == FIMC_DMA)
+ cfg |= S5P_MSCTRL_INPUT_MEMORY;
+ else
+ cfg |= S5P_MSCTRL_INPUT_EXTCAM;
+
+ writel(cfg, dev->regs + S5P_MSCTRL);
+}
+
+void fimc_hw_set_output_path(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+
+ u32 cfg = readl(dev->regs + S5P_CISCCTRL);
+ cfg &= ~S5P_CISCCTRL_LCDPATHEN_FIFO;
+ if (ctx->out_path == FIMC_LCDFIFO)
+ cfg |= S5P_CISCCTRL_LCDPATHEN_FIFO;
+ writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+void fimc_hw_set_input_addr(struct fimc_dev *dev, struct fimc_addr *paddr)
+{
+ u32 cfg = 0;
+
+ cfg = readl(dev->regs + S5P_CIREAL_ISIZE);
+ cfg |= S5P_CIREAL_ISIZE_ADDR_CH_DIS;
+ writel(cfg, dev->regs + S5P_CIREAL_ISIZE);
+
+ writel(paddr->y, dev->regs + S5P_CIIYSA0);
+ writel(paddr->cb, dev->regs + S5P_CIICBSA0);
+ writel(paddr->cr, dev->regs + S5P_CIICRSA0);
+
+ cfg &= ~S5P_CIREAL_ISIZE_ADDR_CH_DIS;
+ writel(cfg, dev->regs + S5P_CIREAL_ISIZE);
+}
+
+void fimc_hw_set_output_addr(struct fimc_dev *dev, struct fimc_addr *paddr)
+{
+ int i;
+ /* Set all the output register sets to point to single video buffer. */
+ for (i = 0; i < FIMC_MAX_OUT_BUFS; i++) {
+ writel(paddr->y, dev->regs + S5P_CIOYSA(i));
+ writel(paddr->cb, dev->regs + S5P_CIOCBSA(i));
+ writel(paddr->cr, dev->regs + S5P_CIOCRSA(i));
+ }
+}
--- /dev/null
+/*
+ * Register definition file for Samsung Camera Interface (FIMC) driver
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef REGS_FIMC_H_
+#define REGS_FIMC_H_
+
+#define S5P_CIOYSA(__x) (0x18 + (__x) * 4)
+#define S5P_CIOCBSA(__x) (0x28 + (__x) * 4)
+#define S5P_CIOCRSA(__x) (0x38 + (__x) * 4)
+
+/* Input source format */
+#define S5P_CISRCFMT 0x00
+#define S5P_CISRCFMT_ITU601_8BIT (1 << 31)
+#define S5P_CISRCFMT_ITU601_16BIT (1 << 29)
+#define S5P_CISRCFMT_ORDER422_YCBYCR (0 << 14)
+#define S5P_CISRCFMT_ORDER422_YCRYCB (1 << 14)
+#define S5P_CISRCFMT_ORDER422_CBYCRY (2 << 14)
+#define S5P_CISRCFMT_ORDER422_CRYCBY (3 << 14)
+#define S5P_CISRCFMT_HSIZE(x) ((x) << 16)
+#define S5P_CISRCFMT_VSIZE(x) ((x) << 0)
+
+/* Window offset */
+#define S5P_CIWDOFST 0x04
+#define S5P_CIWDOFST_WINOFSEN (1 << 31)
+#define S5P_CIWDOFST_CLROVFIY (1 << 30)
+#define S5P_CIWDOFST_CLROVRLB (1 << 29)
+#define S5P_CIWDOFST_WINHOROFST_MASK (0x7ff << 16)
+#define S5P_CIWDOFST_CLROVFICB (1 << 15)
+#define S5P_CIWDOFST_CLROVFICR (1 << 14)
+#define S5P_CIWDOFST_WINHOROFST(x) ((x) << 16)
+#define S5P_CIWDOFST_WINVEROFST(x) ((x) << 0)
+#define S5P_CIWDOFST_WINVEROFST_MASK (0xfff << 0)
+
+/* Global control */
+#define S5P_CIGCTRL 0x08
+#define S5P_CIGCTRL_SWRST (1 << 31)
+#define S5P_CIGCTRL_CAMRST_A (1 << 30)
+#define S5P_CIGCTRL_SELCAM_ITU_A (1 << 29)
+#define S5P_CIGCTRL_SELCAM_ITU_MASK (1 << 29)
+#define S5P_CIGCTRL_TESTPAT_NORMAL (0 << 27)
+#define S5P_CIGCTRL_TESTPAT_COLOR_BAR (1 << 27)
+#define S5P_CIGCTRL_TESTPAT_HOR_INC (2 << 27)
+#define S5P_CIGCTRL_TESTPAT_VER_INC (3 << 27)
+#define S5P_CIGCTRL_TESTPAT_MASK (3 << 27)
+#define S5P_CIGCTRL_TESTPAT_SHIFT (27)
+#define S5P_CIGCTRL_INVPOLPCLK (1 << 26)
+#define S5P_CIGCTRL_INVPOLVSYNC (1 << 25)
+#define S5P_CIGCTRL_INVPOLHREF (1 << 24)
+#define S5P_CIGCTRL_IRQ_OVFEN (1 << 22)
+#define S5P_CIGCTRL_HREF_MASK (1 << 21)
+#define S5P_CIGCTRL_IRQ_LEVEL (1 << 20)
+#define S5P_CIGCTRL_IRQ_CLR (1 << 19)
+#define S5P_CIGCTRL_IRQ_ENABLE (1 << 16)
+#define S5P_CIGCTRL_SHDW_DISABLE (1 << 12)
+#define S5P_CIGCTRL_SELCAM_MIPI_A (1 << 7)
+#define S5P_CIGCTRL_CAMIF_SELWB (1 << 6)
+#define S5P_CIGCTRL_INVPOLHSYNC (1 << 4)
+#define S5P_CIGCTRL_SELCAM_MIPI (1 << 3)
+#define S5P_CIGCTRL_INTERLACE (1 << 0)
+
+/* Window offset 2 */
+#define S5P_CIWDOFST2 0x14
+#define S5P_CIWDOFST2_HOROFF_MASK (0xfff << 16)
+#define S5P_CIWDOFST2_VEROFF_MASK (0xfff << 0)
+#define S5P_CIWDOFST2_HOROFF(x) ((x) << 16)
+#define S5P_CIWDOFST2_VEROFF(x) ((x) << 0)
+
+/* Output DMA Y plane start address */
+#define S5P_CIOYSA1 0x18
+#define S5P_CIOYSA2 0x1c
+#define S5P_CIOYSA3 0x20
+#define S5P_CIOYSA4 0x24
+
+/* Output DMA Cb plane start address */
+#define S5P_CIOCBSA1 0x28
+#define S5P_CIOCBSA2 0x2c
+#define S5P_CIOCBSA3 0x30
+#define S5P_CIOCBSA4 0x34
+
+/* Output DMA Cr plane start address */
+#define S5P_CIOCRSA1 0x38
+#define S5P_CIOCRSA2 0x3c
+#define S5P_CIOCRSA3 0x40
+#define S5P_CIOCRSA4 0x44
+
+/* Target image format */
+#define S5P_CITRGFMT 0x48
+#define S5P_CITRGFMT_INROT90 (1 << 31)
+#define S5P_CITRGFMT_YCBCR420 (0 << 29)
+#define S5P_CITRGFMT_YCBCR422 (1 << 29)
+#define S5P_CITRGFMT_YCBCR422_1P (2 << 29)
+#define S5P_CITRGFMT_RGB (3 << 29)
+#define S5P_CITRGFMT_FMT_MASK (3 << 29)
+#define S5P_CITRGFMT_HSIZE_MASK (0xfff << 16)
+#define S5P_CITRGFMT_FLIP_SHIFT (14)
+#define S5P_CITRGFMT_FLIP_NORMAL (0 << 14)
+#define S5P_CITRGFMT_FLIP_X_MIRROR (1 << 14)
+#define S5P_CITRGFMT_FLIP_Y_MIRROR (2 << 14)
+#define S5P_CITRGFMT_FLIP_180 (3 << 14)
+#define S5P_CITRGFMT_FLIP_MASK (3 << 14)
+#define S5P_CITRGFMT_OUTROT90 (1 << 13)
+#define S5P_CITRGFMT_VSIZE_MASK (0xfff << 0)
+#define S5P_CITRGFMT_HSIZE(x) ((x) << 16)
+#define S5P_CITRGFMT_VSIZE(x) ((x) << 0)
+
+/* Output DMA control */
+#define S5P_CIOCTRL 0x4c
+#define S5P_CIOCTRL_ORDER422_MASK (3 << 0)
+#define S5P_CIOCTRL_ORDER422_CRYCBY (0 << 0)
+#define S5P_CIOCTRL_ORDER422_YCRYCB (1 << 0)
+#define S5P_CIOCTRL_ORDER422_CBYCRY (2 << 0)
+#define S5P_CIOCTRL_ORDER422_YCBYCR (3 << 0)
+#define S5P_CIOCTRL_LASTIRQ_ENABLE (1 << 2)
+#define S5P_CIOCTRL_YCBCR_3PLANE (0 << 3)
+#define S5P_CIOCTRL_YCBCR_2PLANE (1 << 3)
+#define S5P_CIOCTRL_YCBCR_PLANE_MASK (1 << 3)
+#define S5P_CIOCTRL_ORDER2P_SHIFT (24)
+#define S5P_CIOCTRL_ORDER2P_MASK (3 << 24)
+#define S5P_CIOCTRL_ORDER422_2P_LSB_CRCB (0 << 24)
+
+/* Pre-scaler control 1 */
+#define S5P_CISCPRERATIO 0x50
+#define S5P_CISCPRERATIO_SHFACTOR(x) ((x) << 28)
+#define S5P_CISCPRERATIO_HOR(x) ((x) << 16)
+#define S5P_CISCPRERATIO_VER(x) ((x) << 0)
+
+#define S5P_CISCPREDST 0x54
+#define S5P_CISCPREDST_WIDTH(x) ((x) << 16)
+#define S5P_CISCPREDST_HEIGHT(x) ((x) << 0)
+
+/* Main scaler control */
+#define S5P_CISCCTRL 0x58
+#define S5P_CISCCTRL_SCALERBYPASS (1 << 31)
+#define S5P_CISCCTRL_SCALEUP_H (1 << 30)
+#define S5P_CISCCTRL_SCALEUP_V (1 << 29)
+#define S5P_CISCCTRL_CSCR2Y_WIDE (1 << 28)
+#define S5P_CISCCTRL_CSCY2R_WIDE (1 << 27)
+#define S5P_CISCCTRL_LCDPATHEN_FIFO (1 << 26)
+#define S5P_CISCCTRL_INTERLACE (1 << 25)
+#define S5P_CISCCTRL_SCALERSTART (1 << 15)
+#define S5P_CISCCTRL_INRGB_FMT_RGB565 (0 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_RGB666 (1 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_RGB888 (2 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_MASK (3 << 13)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB565 (0 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB666 (1 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB888 (2 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_MASK (3 << 11)
+#define S5P_CISCCTRL_RGB_EXT (1 << 10)
+#define S5P_CISCCTRL_ONE2ONE (1 << 9)
+#define S5P_CISCCTRL_SC_HORRATIO(x) ((x) << 16)
+#define S5P_CISCCTRL_SC_VERRATIO(x) ((x) << 0)
+
+/* Target area */
+#define S5P_CITAREA 0x5c
+#define S5P_CITAREA_MASK 0x0fffffff
+
+/* General status */
+#define S5P_CISTATUS 0x64
+#define S5P_CISTATUS_OVFIY (1 << 31)
+#define S5P_CISTATUS_OVFICB (1 << 30)
+#define S5P_CISTATUS_OVFICR (1 << 29)
+#define S5P_CISTATUS_VSYNC (1 << 28)
+#define S5P_CISTATUS_WINOFF_EN (1 << 25)
+#define S5P_CISTATUS_IMGCPT_EN (1 << 22)
+#define S5P_CISTATUS_IMGCPT_SCEN (1 << 21)
+#define S5P_CISTATUS_VSYNC_A (1 << 20)
+#define S5P_CISTATUS_VSYNC_B (1 << 19)
+#define S5P_CISTATUS_OVRLB (1 << 18)
+#define S5P_CISTATUS_FRAME_END (1 << 17)
+#define S5P_CISTATUS_LASTCAPT_END (1 << 16)
+#define S5P_CISTATUS_VVALID_A (1 << 15)
+#define S5P_CISTATUS_VVALID_B (1 << 14)
+
+/* Image capture control */
+#define S5P_CIIMGCPT 0xc0
+#define S5P_CIIMGCPT_IMGCPTEN (1 << 31)
+#define S5P_CIIMGCPT_IMGCPTEN_SC (1 << 30)
+#define S5P_CIIMGCPT_CPT_FREN_ENABLE (1 << 25)
+#define S5P_CIIMGCPT_CPT_FRMOD_CNT (1 << 18)
+
+/* Frame capture sequence */
+#define S5P_CICPTSEQ 0xc4
+
+/* Image effect */
+#define S5P_CIIMGEFF 0xd0
+#define S5P_CIIMGEFF_IE_DISABLE (0 << 30)
+#define S5P_CIIMGEFF_IE_ENABLE (1 << 30)
+#define S5P_CIIMGEFF_IE_SC_BEFORE (0 << 29)
+#define S5P_CIIMGEFF_IE_SC_AFTER (1 << 29)
+#define S5P_CIIMGEFF_FIN_BYPASS (0 << 26)
+#define S5P_CIIMGEFF_FIN_ARBITRARY (1 << 26)
+#define S5P_CIIMGEFF_FIN_NEGATIVE (2 << 26)
+#define S5P_CIIMGEFF_FIN_ARTFREEZE (3 << 26)
+#define S5P_CIIMGEFF_FIN_EMBOSSING (4 << 26)
+#define S5P_CIIMGEFF_FIN_SILHOUETTE (5 << 26)
+#define S5P_CIIMGEFF_FIN_MASK (7 << 26)
+#define S5P_CIIMGEFF_PAT_CBCR_MASK ((0xff < 13) | (0xff < 0))
+#define S5P_CIIMGEFF_PAT_CB(x) ((x) << 13)
+#define S5P_CIIMGEFF_PAT_CR(x) ((x) << 0)
+
+/* Input DMA Y/Cb/Cr plane start address 0 */
+#define S5P_CIIYSA0 0xd4
+#define S5P_CIICBSA0 0xd8
+#define S5P_CIICRSA0 0xdc
+
+/* Real input DMA image size */
+#define S5P_CIREAL_ISIZE 0xf8
+#define S5P_CIREAL_ISIZE_AUTOLOAD_EN (1 << 31)
+#define S5P_CIREAL_ISIZE_ADDR_CH_DIS (1 << 30)
+#define S5P_CIREAL_ISIZE_HEIGHT(x) ((x) << 16)
+#define S5P_CIREAL_ISIZE_WIDTH(x) ((x) << 0)
+
+
+/* Input DMA control */
+#define S5P_MSCTRL 0xfc
+#define S5P_MSCTRL_IN_BURST_COUNT_MASK (3 << 24)
+#define S5P_MSCTRL_2P_IN_ORDER_MASK (3 << 16)
+#define S5P_MSCTRL_2P_IN_ORDER_SHIFT 16
+#define S5P_MSCTRL_C_INT_IN_3PLANE (0 << 15)
+#define S5P_MSCTRL_C_INT_IN_2PLANE (1 << 15)
+#define S5P_MSCTRL_C_INT_IN_MASK (1 << 15)
+#define S5P_MSCTRL_FLIP_SHIFT 13
+#define S5P_MSCTRL_FLIP_MASK (3 << 13)
+#define S5P_MSCTRL_FLIP_NORMAL (0 << 13)
+#define S5P_MSCTRL_FLIP_X_MIRROR (1 << 13)
+#define S5P_MSCTRL_FLIP_Y_MIRROR (2 << 13)
+#define S5P_MSCTRL_FLIP_180 (3 << 13)
+#define S5P_MSCTRL_ORDER422_SHIFT 4
+#define S5P_MSCTRL_ORDER422_CRYCBY (0 << 4)
+#define S5P_MSCTRL_ORDER422_YCRYCB (1 << 4)
+#define S5P_MSCTRL_ORDER422_CBYCRY (2 << 4)
+#define S5P_MSCTRL_ORDER422_YCBYCR (3 << 4)
+#define S5P_MSCTRL_ORDER422_MASK (3 << 4)
+#define S5P_MSCTRL_INPUT_EXTCAM (0 << 3)
+#define S5P_MSCTRL_INPUT_MEMORY (1 << 3)
+#define S5P_MSCTRL_INPUT_MASK (1 << 3)
+#define S5P_MSCTRL_INFORMAT_YCBCR420 (0 << 1)
+#define S5P_MSCTRL_INFORMAT_YCBCR422 (1 << 1)
+#define S5P_MSCTRL_INFORMAT_YCBCR422_1P (2 << 1)
+#define S5P_MSCTRL_INFORMAT_RGB (3 << 1)
+#define S5P_MSCTRL_INFORMAT_MASK (3 << 1)
+#define S5P_MSCTRL_ENVID (1 << 0)
+#define S5P_MSCTRL_FRAME_COUNT(x) ((x) << 24)
+
+/* Input DMA Y/Cb/Cr plane start address 1 */
+#define S5P_CIIYSA1 0x144
+#define S5P_CIICBSA1 0x148
+#define S5P_CIICRSA1 0x14c
+
+/* Output DMA Y/Cb/Cr offset */
+#define S5P_CIOYOFF 0x168
+#define S5P_CIOCBOFF 0x16c
+#define S5P_CIOCROFF 0x170
+
+/* Input DMA Y/Cb/Cr offset */
+#define S5P_CIIYOFF 0x174
+#define S5P_CIICBOFF 0x178
+#define S5P_CIICROFF 0x17c
+
+#define S5P_CIO_OFFS_VER(x) ((x) << 16)
+#define S5P_CIO_OFFS_HOR(x) ((x) << 0)
+
+/* Input DMA original image size */
+#define S5P_ORGISIZE 0x180
+
+/* Output DMA original image size */
+#define S5P_ORGOSIZE 0x184
+
+#define S5P_ORIG_SIZE_VER(x) ((x) << 16)
+#define S5P_ORIG_SIZE_HOR(x) ((x) << 0)
+
+/* Real output DMA image size (extension register) */
+#define S5P_CIEXTEN 0x188
+
+#define S5P_CIDMAPARAM 0x18c
+#define S5P_CIDMAPARAM_R_LINEAR (0 << 29)
+#define S5P_CIDMAPARAM_R_64X32 (3 << 29)
+#define S5P_CIDMAPARAM_W_LINEAR (0 << 13)
+#define S5P_CIDMAPARAM_W_64X32 (3 << 13)
+#define S5P_CIDMAPARAM_TILE_MASK ((3 << 29) | (3 << 13))
+
+/* MIPI CSI image format */
+#define S5P_CSIIMGFMT 0x194
+
+#endif /* REGS_FIMC_H_ */
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
#include <media/saa7115.h>
struct saa711x_state {
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+
+ struct {
+ /* chroma gain control cluster */
+ struct v4l2_ctrl *agc;
+ struct v4l2_ctrl *gain;
+ };
+
v4l2_std_id std;
int input;
int output;
int enable;
int radio;
- int bright;
- int contrast;
- int hue;
- int sat;
- int chroma_agc;
int width;
int height;
u32 ident;
return container_of(sd, struct saa711x_state, sd);
}
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct saa711x_state, hdl)->sd;
+}
+
/* ----------------------------------------------------------------------- */
static inline int saa711x_write(struct v4l2_subdev *sd, u8 reg, u8 value)
return 0;
}
-static int saa711x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct saa711x_state *state = to_state(sd);
- u8 val;
switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- if (ctrl->value < 0 || ctrl->value > 255) {
- v4l2_err(sd, "invalid brightness setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->bright = ctrl->value;
- saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, state->bright);
- break;
-
- case V4L2_CID_CONTRAST:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l2_err(sd, "invalid contrast setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->contrast = ctrl->value;
- saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, state->contrast);
- break;
-
- case V4L2_CID_SATURATION:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l2_err(sd, "invalid saturation setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->sat = ctrl->value;
- saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, state->sat);
- break;
-
- case V4L2_CID_HUE:
- if (ctrl->value < -128 || ctrl->value > 127) {
- v4l2_err(sd, "invalid hue setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->hue = ctrl->value;
- saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, state->hue);
- break;
case V4L2_CID_CHROMA_AGC:
- val = saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL);
- state->chroma_agc = ctrl->value;
- if (ctrl->value)
- val &= 0x7f;
- else
- val |= 0x80;
- saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, val);
+ /* chroma gain cluster */
+ if (state->agc->cur.val)
+ state->gain->cur.val =
+ saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f;
break;
- case V4L2_CID_CHROMA_GAIN:
- /* Chroma gain cannot be set when AGC is enabled */
- if (state->chroma_agc == 1)
- return -EINVAL;
- saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, ctrl->value | 0x80);
- break;
- default:
- return -EINVAL;
}
-
return 0;
}
-static int saa711x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int saa711x_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct saa711x_state *state = to_state(sd);
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
- ctrl->value = state->bright;
+ saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, ctrl->val);
break;
+
case V4L2_CID_CONTRAST:
- ctrl->value = state->contrast;
+ saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, ctrl->val);
break;
+
case V4L2_CID_SATURATION:
- ctrl->value = state->sat;
+ saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, ctrl->val);
break;
+
case V4L2_CID_HUE:
- ctrl->value = state->hue;
+ saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, ctrl->val);
break;
+
case V4L2_CID_CHROMA_AGC:
- ctrl->value = state->chroma_agc;
- break;
- case V4L2_CID_CHROMA_GAIN:
- ctrl->value = saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f;
+ /* chroma gain cluster */
+ if (state->agc->val)
+ saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val);
+ else
+ saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val | 0x80);
+ v4l2_ctrl_activate(state->gain, !state->agc->val);
break;
+
default:
return -EINVAL;
}
return 0;
}
-static int saa711x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- switch (qc->id) {
- case V4L2_CID_BRIGHTNESS:
- return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
- case V4L2_CID_CONTRAST:
- case V4L2_CID_SATURATION:
- return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64);
- case V4L2_CID_HUE:
- return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0);
- case V4L2_CID_CHROMA_AGC:
- return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
- case V4L2_CID_CHROMA_GAIN:
- return v4l2_ctrl_query_fill(qc, 0, 127, 1, 48);
- default:
- return -EINVAL;
- }
-}
-
static int saa711x_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct saa711x_state *state = to_state(sd);
break;
}
v4l2_info(sd, "Width, Height: %d, %d\n", state->width, state->height);
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
return 0;
}
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops saa711x_ctrl_ops = {
+ .s_ctrl = saa711x_s_ctrl,
+ .g_volatile_ctrl = saa711x_g_volatile_ctrl,
+};
+
static const struct v4l2_subdev_core_ops saa711x_core_ops = {
.log_status = saa711x_log_status,
.g_chip_ident = saa711x_g_chip_ident,
- .g_ctrl = saa711x_g_ctrl,
- .s_ctrl = saa711x_s_ctrl,
- .queryctrl = saa711x_queryctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
.s_std = saa711x_s_std,
.reset = saa711x_reset,
.s_gpio = saa711x_s_gpio,
{
struct saa711x_state *state;
struct v4l2_subdev *sd;
- int i;
- char name[17];
+ struct v4l2_ctrl_handler *hdl;
+ int i;
+ char name[17];
char chip_id;
int autodetect = !id || id->driver_data == 1;
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &saa711x_ops);
+
+ hdl = &state->hdl;
+ v4l2_ctrl_handler_init(hdl, 6);
+ /* add in ascending ID order */
+ v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 127, 1, 64);
+ v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 127, 1, 64);
+ v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_HUE, -128, 127, 1, 0);
+ state->agc = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_CHROMA_AGC, 0, 1, 1, 1);
+ state->gain = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_CHROMA_GAIN, 0, 127, 1, 40);
+ state->gain->is_volatile = 1;
+ sd->ctrl_handler = hdl;
+ if (hdl->error) {
+ int err = hdl->error;
+
+ v4l2_ctrl_handler_free(hdl);
+ kfree(state);
+ return err;
+ }
+ state->agc->flags |= V4L2_CTRL_FLAG_UPDATE;
+ v4l2_ctrl_cluster(2, &state->agc);
+
state->input = -1;
state->output = SAA7115_IPORT_ON;
state->enable = 1;
state->radio = 0;
- state->bright = 128;
- state->contrast = 64;
- state->hue = 0;
- state->sat = 64;
- state->chroma_agc = 1;
switch (chip_id) {
case '1':
state->ident = V4L2_IDENT_SAA7111;
if (state->ident > V4L2_IDENT_SAA7111A)
saa711x_writeregs(sd, saa7115_init_misc);
saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
+ v4l2_ctrl_handler_setup(hdl);
v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n",
saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC),
struct v4l2_subdev *sd = i2c_get_clientdata(client);
v4l2_device_unregister_subdev(sd);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
kfree(to_state(sd));
return 0;
}
tristate "Philips SAA7134 support"
depends on VIDEO_DEV && PCI && I2C && INPUT
select VIDEOBUF_DMA_SG
- select VIDEO_IR
+ depends on VIDEO_IR
select VIDEO_TUNER
select VIDEO_TVEEPROM
select CRC32
#include <linux/videodev2.h>
#include <linux/i2c.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-i2c-drv.h>
MODULE_DESCRIPTION("Philips SAA717x audio/video decoder driver");
struct saa717x_state {
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
v4l2_std_id std;
int input;
int enable;
int radio;
- int bright;
- int contrast;
- int hue;
- int sat;
int playback;
int audio;
int tuner_audio_mode;
return container_of(sd, struct saa717x_state, sd);
}
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct saa717x_state, hdl)->sd;
+}
+
/* ----------------------------------------------------------------------- */
/* for audio mode */
saa717x_write(sd, 0x470, reg_set_audio_template[audio_mode][1]);
}
-/* write regs to video output level (bright,contrast,hue,sat) */
-static void set_video_output_level_regs(struct v4l2_subdev *sd,
- struct saa717x_state *decoder)
-{
- /* brightness ffh (bright) - 80h (ITU level) - 00h (dark) */
- saa717x_write(sd, 0x10a, decoder->bright);
-
- /* contrast 7fh (max: 1.984) - 44h (ITU) - 40h (1.0) -
- 0h (luminance off) 40: i2c dump
- c0h (-1.0 inverse chrominance)
- 80h (-2.0 inverse chrominance) */
- saa717x_write(sd, 0x10b, decoder->contrast);
-
- /* saturation? 7fh(max)-40h(ITU)-0h(color off)
- c0h (-1.0 inverse chrominance)
- 80h (-2.0 inverse chrominance) */
- saa717x_write(sd, 0x10c, decoder->sat);
-
- /* color hue (phase) control
- 7fh (+178.6) - 0h (0 normal) - 80h (-180.0) */
- saa717x_write(sd, 0x10d, decoder->hue);
-}
-
/* write regs to set audio volume, bass and treble */
static int set_audio_regs(struct v4l2_subdev *sd,
struct saa717x_state *decoder)
saa717x_write(sd, 0x480, val);
- /* bass and treble; go to another function */
/* set bass and treble */
- val = decoder->audio_main_bass | (decoder->audio_main_treble << 8);
+ val = decoder->audio_main_bass & 0x1f;
+ val |= (decoder->audio_main_treble & 0x1f) << 5;
saa717x_write(sd, 0x488, val);
return 0;
}
saa717x_write(sd, 0x71 + task_shift, yscale >> 8);
}
-static int saa717x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct saa717x_state *state = to_state(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- if (ctrl->value < 0 || ctrl->value > 255) {
- v4l2_err(sd, "invalid brightness setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->bright = ctrl->value;
- v4l2_dbg(1, debug, sd, "bright:%d\n", state->bright);
- saa717x_write(sd, 0x10a, state->bright);
- break;
-
- case V4L2_CID_CONTRAST:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l2_err(sd, "invalid contrast setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->contrast = ctrl->value;
- v4l2_dbg(1, debug, sd, "contrast:%d\n", state->contrast);
- saa717x_write(sd, 0x10b, state->contrast);
- break;
-
- case V4L2_CID_SATURATION:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l2_err(sd, "invalid saturation setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->sat = ctrl->value;
- v4l2_dbg(1, debug, sd, "sat:%d\n", state->sat);
- saa717x_write(sd, 0x10c, state->sat);
- break;
-
- case V4L2_CID_HUE:
- if (ctrl->value < -128 || ctrl->value > 127) {
- v4l2_err(sd, "invalid hue setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->hue = ctrl->value;
- v4l2_dbg(1, debug, sd, "hue:%d\n", state->hue);
- saa717x_write(sd, 0x10d, state->hue);
- break;
-
- case V4L2_CID_AUDIO_MUTE:
- state->audio_main_mute = ctrl->value;
- set_audio_regs(sd, state);
- break;
-
- case V4L2_CID_AUDIO_VOLUME:
- state->audio_main_volume = ctrl->value;
- set_audio_regs(sd, state);
- break;
-
- case V4L2_CID_AUDIO_BALANCE:
- state->audio_main_balance = ctrl->value;
- set_audio_regs(sd, state);
- break;
-
- case V4L2_CID_AUDIO_TREBLE:
- state->audio_main_treble = ctrl->value;
- set_audio_regs(sd, state);
- break;
-
- case V4L2_CID_AUDIO_BASS:
- state->audio_main_bass = ctrl->value;
- set_audio_regs(sd, state);
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int saa717x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int saa717x_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct saa717x_state *state = to_state(sd);
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
- ctrl->value = state->bright;
- break;
+ saa717x_write(sd, 0x10a, ctrl->val);
+ return 0;
case V4L2_CID_CONTRAST:
- ctrl->value = state->contrast;
- break;
+ saa717x_write(sd, 0x10b, ctrl->val);
+ return 0;
case V4L2_CID_SATURATION:
- ctrl->value = state->sat;
- break;
+ saa717x_write(sd, 0x10c, ctrl->val);
+ return 0;
case V4L2_CID_HUE:
- ctrl->value = state->hue;
- break;
+ saa717x_write(sd, 0x10d, ctrl->val);
+ return 0;
case V4L2_CID_AUDIO_MUTE:
- ctrl->value = state->audio_main_mute;
+ state->audio_main_mute = ctrl->val;
break;
case V4L2_CID_AUDIO_VOLUME:
- ctrl->value = state->audio_main_volume;
+ state->audio_main_volume = ctrl->val;
break;
case V4L2_CID_AUDIO_BALANCE:
- ctrl->value = state->audio_main_balance;
+ state->audio_main_balance = ctrl->val;
break;
case V4L2_CID_AUDIO_TREBLE:
- ctrl->value = state->audio_main_treble;
+ state->audio_main_treble = ctrl->val;
break;
case V4L2_CID_AUDIO_BASS:
- ctrl->value = state->audio_main_bass;
+ state->audio_main_bass = ctrl->val;
break;
default:
- return -EINVAL;
+ return 0;
}
-
+ set_audio_regs(sd, state);
return 0;
}
-static struct v4l2_queryctrl saa717x_qctrl[] = {
- {
- .id = V4L2_CID_BRIGHTNESS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Brightness",
- .minimum = 0,
- .maximum = 255,
- .step = 1,
- .default_value = 128,
- .flags = 0,
- }, {
- .id = V4L2_CID_CONTRAST,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Contrast",
- .minimum = 0,
- .maximum = 255,
- .step = 1,
- .default_value = 64,
- .flags = 0,
- }, {
- .id = V4L2_CID_SATURATION,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Saturation",
- .minimum = 0,
- .maximum = 255,
- .step = 1,
- .default_value = 64,
- .flags = 0,
- }, {
- .id = V4L2_CID_HUE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Hue",
- .minimum = -128,
- .maximum = 127,
- .step = 1,
- .default_value = 0,
- .flags = 0,
- }, {
- .id = V4L2_CID_AUDIO_VOLUME,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Volume",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535 / 100,
- .default_value = 58880,
- .flags = 0,
- }, {
- .id = V4L2_CID_AUDIO_BALANCE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Balance",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535 / 100,
- .default_value = 32768,
- .flags = 0,
- }, {
- .id = V4L2_CID_AUDIO_MUTE,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Mute",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- .flags = 0,
- }, {
- .id = V4L2_CID_AUDIO_BASS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Bass",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535 / 100,
- .default_value = 32768,
- }, {
- .id = V4L2_CID_AUDIO_TREBLE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Treble",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535 / 100,
- .default_value = 32768,
- },
-};
-
static int saa717x_s_video_routing(struct v4l2_subdev *sd,
u32 input, u32 output, u32 config)
{
return 0;
}
-static int saa717x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(saa717x_qctrl); i++)
- if (qc->id && qc->id == saa717x_qctrl[i].id) {
- memcpy(qc, &saa717x_qctrl[i], sizeof(*qc));
- return 0;
- }
- return -EINVAL;
-}
-
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int saa717x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
{
return 0;
}
+static int saa717x_log_status(struct v4l2_subdev *sd)
+{
+ struct saa717x_state *state = to_state(sd);
+
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
+ return 0;
+}
+
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops saa717x_ctrl_ops = {
+ .s_ctrl = saa717x_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops saa717x_core_ops = {
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = saa717x_g_register,
.s_register = saa717x_s_register,
#endif
- .queryctrl = saa717x_queryctrl,
- .g_ctrl = saa717x_g_ctrl,
- .s_ctrl = saa717x_s_ctrl,
.s_std = saa717x_s_std,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
+ .log_status = saa717x_log_status,
};
static const struct v4l2_subdev_tuner_ops saa717x_tuner_ops = {
const struct i2c_device_id *did)
{
struct saa717x_state *decoder;
+ struct v4l2_ctrl_handler *hdl;
struct v4l2_subdev *sd;
u8 id = 0;
char *p = "";
p = "saa7171";
v4l2_info(sd, "%s found @ 0x%x (%s)\n", p,
client->addr << 1, client->adapter->name);
+
+ hdl = &decoder->hdl;
+ v4l2_ctrl_handler_init(hdl, 9);
+ /* add in ascending ID order */
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 255, 1, 68);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 255, 1, 64);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_HUE, -128, 127, 1, 0);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 42000);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_AUDIO_BASS, -16, 15, 1, 0);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_AUDIO_TREBLE, -16, 15, 1, 0);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ sd->ctrl_handler = hdl;
+ if (hdl->error) {
+ int err = hdl->error;
+
+ v4l2_ctrl_handler_free(hdl);
+ kfree(decoder);
+ return err;
+ }
+
decoder->std = V4L2_STD_NTSC;
decoder->input = -1;
decoder->enable = 1;
- /* tune these parameters */
- decoder->bright = 0x80;
- decoder->contrast = 0x44;
- decoder->sat = 0x40;
- decoder->hue = 0x00;
-
/* FIXME!! */
decoder->playback = 0; /* initially capture mode used */
decoder->audio = 1; /* DECODER_AUDIO_48_KHZ */
/* set volume, bass and treble */
decoder->audio_main_vol_l = 6;
decoder->audio_main_vol_r = 6;
- decoder->audio_main_bass = 0;
- decoder->audio_main_treble = 0;
- decoder->audio_main_mute = 0;
- decoder->audio_main_balance = 32768;
- /* normalize (24 to -40 (not -84) -> 65535 to 0) */
- decoder->audio_main_volume =
- (decoder->audio_main_vol_r + 41) * 65535 / (24 - (-40));
v4l2_dbg(1, debug, sd, "writing init values\n");
/* FIXME!! */
saa717x_write_regs(sd, reg_init_initialize);
- set_video_output_level_regs(sd, decoder);
- /* set bass,treble to 0db 20041101 K.Ohta */
- decoder->audio_main_bass = 0;
- decoder->audio_main_treble = 0;
- set_audio_regs(sd, decoder);
+
+ v4l2_ctrl_handler_setup(hdl);
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(2*HZ);
struct v4l2_subdev *sd = i2c_get_clientdata(client);
v4l2_device_unregister_subdev(sd);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
kfree(to_state(sd));
return 0;
}
ret = ici->ops->get_crop(icd, ¤t_crop);
/* Prohibit window size change with initialised buffers */
- if (icf->vb_vidq.bufs[0] && !ret &&
- (a->c.width != current_crop.c.width ||
- a->c.height != current_crop.c.height)) {
+ if (ret < 0) {
+ dev_err(&icd->dev,
+ "S_CROP denied: getting current crop failed\n");
+ } else if (icf->vb_vidq.bufs[0] &&
+ (a->c.width != current_crop.c.width ||
+ a->c.height != current_crop.c.height)) {
dev_err(&icd->dev,
"S_CROP denied: queue initialised and sizes differ\n");
ret = -EBUSY;
depends on VIDEO_DEV && I2C && INPUT && SND && DVB_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
- select VIDEO_IR
+ depends on VIDEO_IR
select VIDEOBUF_VMALLOC
select SND_PCM
select VIDEOBUF_DVB
/* Register parameters for 480P */
static const struct i2c_reg_value tvp7002_parms_480P[] = {
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x35, TVP7002_WRITE },
- { TVP7002_HPLL_FDBK_DIV_LSBS, 0x0a, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0xa0, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0x02, TVP7002_WRITE },
{ TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x91, TVP7002_WRITE },
/* Register parameters for 1080I60 */
static const struct i2c_reg_value tvp7002_parms_1080I60[] = {
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
- { TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
{ TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
/* Register parameters for 1080P60 */
static const struct i2c_reg_value tvp7002_parms_1080P60[] = {
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
- { TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0xE0, TVP7002_WRITE },
{ TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
/* Register parameters for 720P60 */
static const struct i2c_reg_value tvp7002_parms_720P60[] = {
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
- { TVP7002_HPLL_FDBK_DIV_LSBS, 0x02, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
{ TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
/* Register parameters for 720P50 */
static const struct i2c_reg_value tvp7002_parms_720P50[] = {
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x7b, TVP7002_WRITE },
- { TVP7002_HPLL_FDBK_DIV_LSBS, 0x0c, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0xc0, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
{ TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
};
unsigned short digit;
int ix, iy;
+ int value;
if ((uvd == NULL) || (frame == NULL))
return;
- if (ch >= '0' && ch <= '9')
- ch -= '0';
- else if (ch >= 'A' && ch <= 'F')
- ch = 10 + (ch - 'A');
- else if (ch >= 'a' && ch <= 'f')
- ch = 10 + (ch - 'a');
- else
+ value = hex_to_bin(ch);
+ if (value < 0)
return;
- digit = digits[ch];
+ digit = digits[value];
for (iy=0; iy < 5; iy++) {
for (ix=0; ix < 3; ix++) {
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_STREAM_NO_FID },
+ /* Miricle 307K */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x17dc,
+ .idProduct = 0x0202,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STREAM_NO_FID },
/* Lenovo Thinkpad SL400/SL500 */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
*
*/
-void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
+void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type,
+ int drop_corrupted)
{
mutex_init(&queue->mutex);
spin_lock_init(&queue->irqlock);
INIT_LIST_HEAD(&queue->mainqueue);
INIT_LIST_HEAD(&queue->irqqueue);
+ queue->flags = drop_corrupted ? UVC_QUEUE_DROP_CORRUPTED : 0;
queue->type = type;
}
uvc_queue_cancel(queue, 0);
INIT_LIST_HEAD(&queue->mainqueue);
- for (i = 0; i < queue->count; ++i)
+ for (i = 0; i < queue->count; ++i) {
+ queue->buffer[i].error = 0;
queue->buffer[i].state = UVC_BUF_STATE_IDLE;
+ }
queue->flags &= ~UVC_QUEUE_STREAMING;
}
struct uvc_buffer *nextbuf;
unsigned long flags;
- if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
- buf->buf.length != buf->buf.bytesused) {
+ if ((queue->flags & UVC_QUEUE_DROP_CORRUPTED) && buf->error) {
+ buf->error = 0;
buf->state = UVC_BUF_STATE_QUEUED;
buf->buf.bytesused = 0;
return buf;
spin_lock_irqsave(&queue->irqlock, flags);
list_del(&buf->queue);
+ buf->error = 0;
buf->state = UVC_BUF_STATE_DONE;
if (!list_empty(&queue->irqqueue))
nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
if (urb->iso_frame_desc[i].status < 0) {
uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
"lost (%d).\n", urb->iso_frame_desc[i].status);
+ /* Mark the buffer as faulty. */
+ if (buf != NULL)
+ buf->error = 1;
continue;
}
uvc_video_decode_end(stream, buf, mem,
urb->iso_frame_desc[i].actual_length);
- if (buf->state == UVC_BUF_STATE_READY)
+ if (buf->state == UVC_BUF_STATE_READY) {
+ if (buf->buf.length != buf->buf.bytesused &&
+ !(stream->cur_format->flags &
+ UVC_FMT_FLAG_COMPRESSED))
+ buf->error = 1;
+
buf = uvc_queue_next_buffer(&stream->queue, buf);
+ }
}
}
atomic_set(&stream->active, 0);
/* Initialize the video buffers queue. */
- uvc_queue_init(&stream->queue, stream->type);
+ uvc_queue_init(&stream->queue, stream->type, !uvc_no_drop_param);
/* Alternate setting 0 should be the default, yet the XBox Live Vision
* Cam (and possibly other devices) crash or otherwise misbehave if
return 0;
}
- if ((stream->cur_format->flags & UVC_FMT_FLAG_COMPRESSED) ||
- uvc_no_drop_param)
- stream->queue.flags &= ~UVC_QUEUE_DROP_INCOMPLETE;
- else
- stream->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE;
-
ret = uvc_queue_enable(&stream->queue, 1);
if (ret < 0)
return ret;
struct list_head queue;
wait_queue_head_t wait;
enum uvc_buffer_state state;
+ unsigned int error;
};
#define UVC_QUEUE_STREAMING (1 << 0)
#define UVC_QUEUE_DISCONNECTED (1 << 1)
-#define UVC_QUEUE_DROP_INCOMPLETE (1 << 2)
+#define UVC_QUEUE_DROP_CORRUPTED (1 << 2)
struct uvc_video_queue {
enum v4l2_buf_type type;
/* Video buffers queue management. */
extern void uvc_queue_init(struct uvc_video_queue *queue,
- enum v4l2_buf_type type);
+ enum v4l2_buf_type type, int drop_corrupted);
extern int uvc_alloc_buffers(struct uvc_video_queue *queue,
unsigned int nbuffers, unsigned int buflength);
extern int uvc_free_buffers(struct uvc_video_queue *queue);
#define __OLD_VIDIOC_ /* To allow fixing old calls*/
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-chip-ident.h>
#include <linux/videodev2.h>
}
EXPORT_SYMBOL(v4l2_ctrl_check);
-/* Returns NULL or a character pointer array containing the menu for
- the given control ID. The pointer array ends with a NULL pointer.
- An empty string signifies a menu entry that is invalid. This allows
- drivers to disable certain options if it is not supported. */
-const char **v4l2_ctrl_get_menu(u32 id)
-{
- static const char *mpeg_audio_sampling_freq[] = {
- "44.1 kHz",
- "48 kHz",
- "32 kHz",
- NULL
- };
- static const char *mpeg_audio_encoding[] = {
- "MPEG-1/2 Layer I",
- "MPEG-1/2 Layer II",
- "MPEG-1/2 Layer III",
- "MPEG-2/4 AAC",
- "AC-3",
- NULL
- };
- static const char *mpeg_audio_l1_bitrate[] = {
- "32 kbps",
- "64 kbps",
- "96 kbps",
- "128 kbps",
- "160 kbps",
- "192 kbps",
- "224 kbps",
- "256 kbps",
- "288 kbps",
- "320 kbps",
- "352 kbps",
- "384 kbps",
- "416 kbps",
- "448 kbps",
- NULL
- };
- static const char *mpeg_audio_l2_bitrate[] = {
- "32 kbps",
- "48 kbps",
- "56 kbps",
- "64 kbps",
- "80 kbps",
- "96 kbps",
- "112 kbps",
- "128 kbps",
- "160 kbps",
- "192 kbps",
- "224 kbps",
- "256 kbps",
- "320 kbps",
- "384 kbps",
- NULL
- };
- static const char *mpeg_audio_l3_bitrate[] = {
- "32 kbps",
- "40 kbps",
- "48 kbps",
- "56 kbps",
- "64 kbps",
- "80 kbps",
- "96 kbps",
- "112 kbps",
- "128 kbps",
- "160 kbps",
- "192 kbps",
- "224 kbps",
- "256 kbps",
- "320 kbps",
- NULL
- };
- static const char *mpeg_audio_ac3_bitrate[] = {
- "32 kbps",
- "40 kbps",
- "48 kbps",
- "56 kbps",
- "64 kbps",
- "80 kbps",
- "96 kbps",
- "112 kbps",
- "128 kbps",
- "160 kbps",
- "192 kbps",
- "224 kbps",
- "256 kbps",
- "320 kbps",
- "384 kbps",
- "448 kbps",
- "512 kbps",
- "576 kbps",
- "640 kbps",
- NULL
- };
- static const char *mpeg_audio_mode[] = {
- "Stereo",
- "Joint Stereo",
- "Dual",
- "Mono",
- NULL
- };
- static const char *mpeg_audio_mode_extension[] = {
- "Bound 4",
- "Bound 8",
- "Bound 12",
- "Bound 16",
- NULL
- };
- static const char *mpeg_audio_emphasis[] = {
- "No Emphasis",
- "50/15 us",
- "CCITT J17",
- NULL
- };
- static const char *mpeg_audio_crc[] = {
- "No CRC",
- "16-bit CRC",
- NULL
- };
- static const char *mpeg_video_encoding[] = {
- "MPEG-1",
- "MPEG-2",
- "MPEG-4 AVC",
- NULL
- };
- static const char *mpeg_video_aspect[] = {
- "1x1",
- "4x3",
- "16x9",
- "2.21x1",
- NULL
- };
- static const char *mpeg_video_bitrate_mode[] = {
- "Variable Bitrate",
- "Constant Bitrate",
- NULL
- };
- static const char *mpeg_stream_type[] = {
- "MPEG-2 Program Stream",
- "MPEG-2 Transport Stream",
- "MPEG-1 System Stream",
- "MPEG-2 DVD-compatible Stream",
- "MPEG-1 VCD-compatible Stream",
- "MPEG-2 SVCD-compatible Stream",
- NULL
- };
- static const char *mpeg_stream_vbi_fmt[] = {
- "No VBI",
- "Private packet, IVTV format",
- NULL
- };
- static const char *camera_power_line_frequency[] = {
- "Disabled",
- "50 Hz",
- "60 Hz",
- NULL
- };
- static const char *camera_exposure_auto[] = {
- "Auto Mode",
- "Manual Mode",
- "Shutter Priority Mode",
- "Aperture Priority Mode",
- NULL
- };
- static const char *colorfx[] = {
- "None",
- "Black & White",
- "Sepia",
- "Negative",
- "Emboss",
- "Sketch",
- "Sky blue",
- "Grass green",
- "Skin whiten",
- "Vivid",
- NULL
- };
- static const char *tune_preemphasis[] = {
- "No preemphasis",
- "50 useconds",
- "75 useconds",
- NULL,
- };
-
- switch (id) {
- case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
- return mpeg_audio_sampling_freq;
- case V4L2_CID_MPEG_AUDIO_ENCODING:
- return mpeg_audio_encoding;
- case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
- return mpeg_audio_l1_bitrate;
- case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
- return mpeg_audio_l2_bitrate;
- case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
- return mpeg_audio_l3_bitrate;
- case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
- return mpeg_audio_ac3_bitrate;
- case V4L2_CID_MPEG_AUDIO_MODE:
- return mpeg_audio_mode;
- case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
- return mpeg_audio_mode_extension;
- case V4L2_CID_MPEG_AUDIO_EMPHASIS:
- return mpeg_audio_emphasis;
- case V4L2_CID_MPEG_AUDIO_CRC:
- return mpeg_audio_crc;
- case V4L2_CID_MPEG_VIDEO_ENCODING:
- return mpeg_video_encoding;
- case V4L2_CID_MPEG_VIDEO_ASPECT:
- return mpeg_video_aspect;
- case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
- return mpeg_video_bitrate_mode;
- case V4L2_CID_MPEG_STREAM_TYPE:
- return mpeg_stream_type;
- case V4L2_CID_MPEG_STREAM_VBI_FMT:
- return mpeg_stream_vbi_fmt;
- case V4L2_CID_POWER_LINE_FREQUENCY:
- return camera_power_line_frequency;
- case V4L2_CID_EXPOSURE_AUTO:
- return camera_exposure_auto;
- case V4L2_CID_COLORFX:
- return colorfx;
- case V4L2_CID_TUNE_PREEMPHASIS:
- return tune_preemphasis;
- default:
- return NULL;
- }
-}
-EXPORT_SYMBOL(v4l2_ctrl_get_menu);
-
-/* Return the control name. */
-const char *v4l2_ctrl_get_name(u32 id)
-{
- switch (id) {
- /* USER controls */
- case V4L2_CID_USER_CLASS: return "User Controls";
- case V4L2_CID_BRIGHTNESS: return "Brightness";
- case V4L2_CID_CONTRAST: return "Contrast";
- case V4L2_CID_SATURATION: return "Saturation";
- case V4L2_CID_HUE: return "Hue";
- case V4L2_CID_AUDIO_VOLUME: return "Volume";
- case V4L2_CID_AUDIO_BALANCE: return "Balance";
- case V4L2_CID_AUDIO_BASS: return "Bass";
- case V4L2_CID_AUDIO_TREBLE: return "Treble";
- case V4L2_CID_AUDIO_MUTE: return "Mute";
- case V4L2_CID_AUDIO_LOUDNESS: return "Loudness";
- case V4L2_CID_BLACK_LEVEL: return "Black Level";
- case V4L2_CID_AUTO_WHITE_BALANCE: return "White Balance, Automatic";
- case V4L2_CID_DO_WHITE_BALANCE: return "Do White Balance";
- case V4L2_CID_RED_BALANCE: return "Red Balance";
- case V4L2_CID_BLUE_BALANCE: return "Blue Balance";
- case V4L2_CID_GAMMA: return "Gamma";
- case V4L2_CID_EXPOSURE: return "Exposure";
- case V4L2_CID_AUTOGAIN: return "Gain, Automatic";
- case V4L2_CID_GAIN: return "Gain";
- case V4L2_CID_HFLIP: return "Horizontal Flip";
- case V4L2_CID_VFLIP: return "Vertical Flip";
- case V4L2_CID_HCENTER: return "Horizontal Center";
- case V4L2_CID_VCENTER: return "Vertical Center";
- case V4L2_CID_POWER_LINE_FREQUENCY: return "Power Line Frequency";
- case V4L2_CID_HUE_AUTO: return "Hue, Automatic";
- case V4L2_CID_WHITE_BALANCE_TEMPERATURE: return "White Balance Temperature";
- case V4L2_CID_SHARPNESS: return "Sharpness";
- case V4L2_CID_BACKLIGHT_COMPENSATION: return "Backlight Compensation";
- case V4L2_CID_CHROMA_AGC: return "Chroma AGC";
- case V4L2_CID_CHROMA_GAIN: return "Chroma Gain";
- case V4L2_CID_COLOR_KILLER: return "Color Killer";
- case V4L2_CID_COLORFX: return "Color Effects";
- case V4L2_CID_AUTOBRIGHTNESS: return "Brightness, Automatic";
- case V4L2_CID_BAND_STOP_FILTER: return "Band-Stop Filter";
- case V4L2_CID_ROTATE: return "Rotate";
- case V4L2_CID_BG_COLOR: return "Background Color";
-
- /* MPEG controls */
- case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls";
- case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency";
- case V4L2_CID_MPEG_AUDIO_ENCODING: return "Audio Encoding";
- case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate";
- case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate";
- case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate";
- case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate";
- case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate";
- case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode";
- case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension";
- case V4L2_CID_MPEG_AUDIO_EMPHASIS: return "Audio Emphasis";
- case V4L2_CID_MPEG_AUDIO_CRC: return "Audio CRC";
- case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute";
- case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding";
- case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect";
- case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames";
- case V4L2_CID_MPEG_VIDEO_GOP_SIZE: return "Video GOP Size";
- case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: return "Video GOP Closure";
- case V4L2_CID_MPEG_VIDEO_PULLDOWN: return "Video Pulldown";
- case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: return "Video Bitrate Mode";
- case V4L2_CID_MPEG_VIDEO_BITRATE: return "Video Bitrate";
- case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: return "Video Peak Bitrate";
- case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
- case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute";
- case V4L2_CID_MPEG_VIDEO_MUTE_YUV: return "Video Mute YUV";
- case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type";
- case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID";
- case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID";
- case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID";
- case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID";
- case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID";
- case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID";
- case V4L2_CID_MPEG_STREAM_VBI_FMT: return "Stream VBI Format";
-
- /* CAMERA controls */
- case V4L2_CID_CAMERA_CLASS: return "Camera Controls";
- case V4L2_CID_EXPOSURE_AUTO: return "Auto Exposure";
- case V4L2_CID_EXPOSURE_ABSOLUTE: return "Exposure Time, Absolute";
- case V4L2_CID_EXPOSURE_AUTO_PRIORITY: return "Exposure, Dynamic Framerate";
- case V4L2_CID_PAN_RELATIVE: return "Pan, Relative";
- case V4L2_CID_TILT_RELATIVE: return "Tilt, Relative";
- case V4L2_CID_PAN_RESET: return "Pan, Reset";
- case V4L2_CID_TILT_RESET: return "Tilt, Reset";
- case V4L2_CID_PAN_ABSOLUTE: return "Pan, Absolute";
- case V4L2_CID_TILT_ABSOLUTE: return "Tilt, Absolute";
- case V4L2_CID_FOCUS_ABSOLUTE: return "Focus, Absolute";
- case V4L2_CID_FOCUS_RELATIVE: return "Focus, Relative";
- case V4L2_CID_FOCUS_AUTO: return "Focus, Automatic";
- case V4L2_CID_IRIS_ABSOLUTE: return "Iris, Absolute";
- case V4L2_CID_IRIS_RELATIVE: return "Iris, Relative";
- case V4L2_CID_ZOOM_ABSOLUTE: return "Zoom, Absolute";
- case V4L2_CID_ZOOM_RELATIVE: return "Zoom, Relative";
- case V4L2_CID_ZOOM_CONTINUOUS: return "Zoom, Continuous";
- case V4L2_CID_PRIVACY: return "Privacy";
-
- /* FM Radio Modulator control */
- case V4L2_CID_FM_TX_CLASS: return "FM Radio Modulator Controls";
- case V4L2_CID_RDS_TX_DEVIATION: return "RDS Signal Deviation";
- case V4L2_CID_RDS_TX_PI: return "RDS Program ID";
- case V4L2_CID_RDS_TX_PTY: return "RDS Program Type";
- case V4L2_CID_RDS_TX_PS_NAME: return "RDS PS Name";
- case V4L2_CID_RDS_TX_RADIO_TEXT: return "RDS Radio Text";
- case V4L2_CID_AUDIO_LIMITER_ENABLED: return "Audio Limiter Feature Enabled";
- case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME: return "Audio Limiter Release Time";
- case V4L2_CID_AUDIO_LIMITER_DEVIATION: return "Audio Limiter Deviation";
- case V4L2_CID_AUDIO_COMPRESSION_ENABLED: return "Audio Compression Feature Enabled";
- case V4L2_CID_AUDIO_COMPRESSION_GAIN: return "Audio Compression Gain";
- case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD: return "Audio Compression Threshold";
- case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME: return "Audio Compression Attack Time";
- case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME: return "Audio Compression Release Time";
- case V4L2_CID_PILOT_TONE_ENABLED: return "Pilot Tone Feature Enabled";
- case V4L2_CID_PILOT_TONE_DEVIATION: return "Pilot Tone Deviation";
- case V4L2_CID_PILOT_TONE_FREQUENCY: return "Pilot Tone Frequency";
- case V4L2_CID_TUNE_PREEMPHASIS: return "Pre-emphasis settings";
- case V4L2_CID_TUNE_POWER_LEVEL: return "Tune Power Level";
- case V4L2_CID_TUNE_ANTENNA_CAPACITOR: return "Tune Antenna Capacitor";
-
- default:
- return NULL;
- }
-}
-EXPORT_SYMBOL(v4l2_ctrl_get_name);
-
/* Fill in a struct v4l2_queryctrl */
int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def)
{
- const char *name = v4l2_ctrl_get_name(qctrl->id);
+ const char *name;
+
+ v4l2_ctrl_fill(qctrl->id, &name, &qctrl->type,
+ &min, &max, &step, &def, &qctrl->flags);
- qctrl->flags = 0;
if (name == NULL)
return -EINVAL;
- switch (qctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_LOUDNESS:
- case V4L2_CID_AUTO_WHITE_BALANCE:
- case V4L2_CID_AUTOGAIN:
- case V4L2_CID_HFLIP:
- case V4L2_CID_VFLIP:
- case V4L2_CID_HUE_AUTO:
- case V4L2_CID_CHROMA_AGC:
- case V4L2_CID_COLOR_KILLER:
- case V4L2_CID_MPEG_AUDIO_MUTE:
- case V4L2_CID_MPEG_VIDEO_MUTE:
- case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
- case V4L2_CID_MPEG_VIDEO_PULLDOWN:
- case V4L2_CID_EXPOSURE_AUTO_PRIORITY:
- case V4L2_CID_FOCUS_AUTO:
- case V4L2_CID_PRIVACY:
- case V4L2_CID_AUDIO_LIMITER_ENABLED:
- case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
- case V4L2_CID_PILOT_TONE_ENABLED:
- qctrl->type = V4L2_CTRL_TYPE_BOOLEAN;
- min = 0;
- max = step = 1;
- break;
- case V4L2_CID_PAN_RESET:
- case V4L2_CID_TILT_RESET:
- qctrl->type = V4L2_CTRL_TYPE_BUTTON;
- qctrl->flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
- min = max = step = def = 0;
- break;
- case V4L2_CID_POWER_LINE_FREQUENCY:
- case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
- case V4L2_CID_MPEG_AUDIO_ENCODING:
- case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
- case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
- case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
- case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
- case V4L2_CID_MPEG_AUDIO_MODE:
- case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
- case V4L2_CID_MPEG_AUDIO_EMPHASIS:
- case V4L2_CID_MPEG_AUDIO_CRC:
- case V4L2_CID_MPEG_VIDEO_ENCODING:
- case V4L2_CID_MPEG_VIDEO_ASPECT:
- case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
- case V4L2_CID_MPEG_STREAM_TYPE:
- case V4L2_CID_MPEG_STREAM_VBI_FMT:
- case V4L2_CID_EXPOSURE_AUTO:
- case V4L2_CID_COLORFX:
- case V4L2_CID_TUNE_PREEMPHASIS:
- qctrl->type = V4L2_CTRL_TYPE_MENU;
- step = 1;
- break;
- case V4L2_CID_RDS_TX_PS_NAME:
- case V4L2_CID_RDS_TX_RADIO_TEXT:
- qctrl->type = V4L2_CTRL_TYPE_STRING;
- break;
- case V4L2_CID_USER_CLASS:
- case V4L2_CID_CAMERA_CLASS:
- case V4L2_CID_MPEG_CLASS:
- case V4L2_CID_FM_TX_CLASS:
- qctrl->type = V4L2_CTRL_TYPE_CTRL_CLASS;
- qctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
- min = max = step = def = 0;
- break;
- case V4L2_CID_BG_COLOR:
- qctrl->type = V4L2_CTRL_TYPE_INTEGER;
- step = 1;
- min = 0;
- /* Max is calculated as RGB888 that is 2^24 */
- max = 0xFFFFFF;
- break;
- default:
- qctrl->type = V4L2_CTRL_TYPE_INTEGER;
- break;
- }
- switch (qctrl->id) {
- case V4L2_CID_MPEG_AUDIO_ENCODING:
- case V4L2_CID_MPEG_AUDIO_MODE:
- case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
- case V4L2_CID_MPEG_VIDEO_B_FRAMES:
- case V4L2_CID_MPEG_STREAM_TYPE:
- qctrl->flags |= V4L2_CTRL_FLAG_UPDATE;
- break;
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_BRIGHTNESS:
- case V4L2_CID_CONTRAST:
- case V4L2_CID_SATURATION:
- case V4L2_CID_HUE:
- case V4L2_CID_RED_BALANCE:
- case V4L2_CID_BLUE_BALANCE:
- case V4L2_CID_GAMMA:
- case V4L2_CID_SHARPNESS:
- case V4L2_CID_CHROMA_GAIN:
- case V4L2_CID_RDS_TX_DEVIATION:
- case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
- case V4L2_CID_AUDIO_LIMITER_DEVIATION:
- case V4L2_CID_AUDIO_COMPRESSION_GAIN:
- case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
- case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
- case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
- case V4L2_CID_PILOT_TONE_DEVIATION:
- case V4L2_CID_PILOT_TONE_FREQUENCY:
- case V4L2_CID_TUNE_POWER_LEVEL:
- case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
- qctrl->flags |= V4L2_CTRL_FLAG_SLIDER;
- break;
- case V4L2_CID_PAN_RELATIVE:
- case V4L2_CID_TILT_RELATIVE:
- case V4L2_CID_FOCUS_RELATIVE:
- case V4L2_CID_IRIS_RELATIVE:
- case V4L2_CID_ZOOM_RELATIVE:
- qctrl->flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
- break;
- }
qctrl->minimum = min;
qctrl->maximum = max;
qctrl->step = step;
/* Create the i2c client */
if (info->addr == 0 && probe_addrs)
- client = i2c_new_probed_device(adapter, info, probe_addrs);
+ client = i2c_new_probed_device(adapter, info, probe_addrs,
+ NULL);
else
client = i2c_new_device(adapter, info);
if (file->f_op->unlocked_ioctl)
ret = file->f_op->unlocked_ioctl(file, cmd, arg);
- else if (file->f_op->ioctl) {
- lock_kernel();
- ret = file->f_op->ioctl(file->f_path.dentry->d_inode, file, cmd, arg);
- unlock_kernel();
- }
return ret;
}
{
long ret = -ENOIOCTLCMD;
- if (!file->f_op->ioctl && !file->f_op->unlocked_ioctl)
+ if (!file->f_op->unlocked_ioctl)
return ret;
switch (cmd) {
--- /dev/null
+/*
+ V4L2 controls framework implementation.
+
+ Copyright (C) 2010 Hans Verkuil <hverkuil@xs4all.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+
+/* Internal temporary helper struct, one for each v4l2_ext_control */
+struct ctrl_helper {
+ /* The control corresponding to the v4l2_ext_control ID field. */
+ struct v4l2_ctrl *ctrl;
+ /* Used internally to mark whether this control was already
+ processed. */
+ bool handled;
+};
+
+/* Returns NULL or a character pointer array containing the menu for
+ the given control ID. The pointer array ends with a NULL pointer.
+ An empty string signifies a menu entry that is invalid. This allows
+ drivers to disable certain options if it is not supported. */
+const char **v4l2_ctrl_get_menu(u32 id)
+{
+ static const char *mpeg_audio_sampling_freq[] = {
+ "44.1 kHz",
+ "48 kHz",
+ "32 kHz",
+ NULL
+ };
+ static const char *mpeg_audio_encoding[] = {
+ "MPEG-1/2 Layer I",
+ "MPEG-1/2 Layer II",
+ "MPEG-1/2 Layer III",
+ "MPEG-2/4 AAC",
+ "AC-3",
+ NULL
+ };
+ static const char *mpeg_audio_l1_bitrate[] = {
+ "32 kbps",
+ "64 kbps",
+ "96 kbps",
+ "128 kbps",
+ "160 kbps",
+ "192 kbps",
+ "224 kbps",
+ "256 kbps",
+ "288 kbps",
+ "320 kbps",
+ "352 kbps",
+ "384 kbps",
+ "416 kbps",
+ "448 kbps",
+ NULL
+ };
+ static const char *mpeg_audio_l2_bitrate[] = {
+ "32 kbps",
+ "48 kbps",
+ "56 kbps",
+ "64 kbps",
+ "80 kbps",
+ "96 kbps",
+ "112 kbps",
+ "128 kbps",
+ "160 kbps",
+ "192 kbps",
+ "224 kbps",
+ "256 kbps",
+ "320 kbps",
+ "384 kbps",
+ NULL
+ };
+ static const char *mpeg_audio_l3_bitrate[] = {
+ "32 kbps",
+ "40 kbps",
+ "48 kbps",
+ "56 kbps",
+ "64 kbps",
+ "80 kbps",
+ "96 kbps",
+ "112 kbps",
+ "128 kbps",
+ "160 kbps",
+ "192 kbps",
+ "224 kbps",
+ "256 kbps",
+ "320 kbps",
+ NULL
+ };
+ static const char *mpeg_audio_ac3_bitrate[] = {
+ "32 kbps",
+ "40 kbps",
+ "48 kbps",
+ "56 kbps",
+ "64 kbps",
+ "80 kbps",
+ "96 kbps",
+ "112 kbps",
+ "128 kbps",
+ "160 kbps",
+ "192 kbps",
+ "224 kbps",
+ "256 kbps",
+ "320 kbps",
+ "384 kbps",
+ "448 kbps",
+ "512 kbps",
+ "576 kbps",
+ "640 kbps",
+ NULL
+ };
+ static const char *mpeg_audio_mode[] = {
+ "Stereo",
+ "Joint Stereo",
+ "Dual",
+ "Mono",
+ NULL
+ };
+ static const char *mpeg_audio_mode_extension[] = {
+ "Bound 4",
+ "Bound 8",
+ "Bound 12",
+ "Bound 16",
+ NULL
+ };
+ static const char *mpeg_audio_emphasis[] = {
+ "No Emphasis",
+ "50/15 us",
+ "CCITT J17",
+ NULL
+ };
+ static const char *mpeg_audio_crc[] = {
+ "No CRC",
+ "16-bit CRC",
+ NULL
+ };
+ static const char *mpeg_video_encoding[] = {
+ "MPEG-1",
+ "MPEG-2",
+ "MPEG-4 AVC",
+ NULL
+ };
+ static const char *mpeg_video_aspect[] = {
+ "1x1",
+ "4x3",
+ "16x9",
+ "2.21x1",
+ NULL
+ };
+ static const char *mpeg_video_bitrate_mode[] = {
+ "Variable Bitrate",
+ "Constant Bitrate",
+ NULL
+ };
+ static const char *mpeg_stream_type[] = {
+ "MPEG-2 Program Stream",
+ "MPEG-2 Transport Stream",
+ "MPEG-1 System Stream",
+ "MPEG-2 DVD-compatible Stream",
+ "MPEG-1 VCD-compatible Stream",
+ "MPEG-2 SVCD-compatible Stream",
+ NULL
+ };
+ static const char *mpeg_stream_vbi_fmt[] = {
+ "No VBI",
+ "Private packet, IVTV format",
+ NULL
+ };
+ static const char *camera_power_line_frequency[] = {
+ "Disabled",
+ "50 Hz",
+ "60 Hz",
+ NULL
+ };
+ static const char *camera_exposure_auto[] = {
+ "Auto Mode",
+ "Manual Mode",
+ "Shutter Priority Mode",
+ "Aperture Priority Mode",
+ NULL
+ };
+ static const char *colorfx[] = {
+ "None",
+ "Black & White",
+ "Sepia",
+ "Negative",
+ "Emboss",
+ "Sketch",
+ "Sky blue",
+ "Grass green",
+ "Skin whiten",
+ "Vivid",
+ NULL
+ };
+ static const char *tune_preemphasis[] = {
+ "No preemphasis",
+ "50 useconds",
+ "75 useconds",
+ NULL,
+ };
+
+ switch (id) {
+ case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
+ return mpeg_audio_sampling_freq;
+ case V4L2_CID_MPEG_AUDIO_ENCODING:
+ return mpeg_audio_encoding;
+ case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
+ return mpeg_audio_l1_bitrate;
+ case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
+ return mpeg_audio_l2_bitrate;
+ case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
+ return mpeg_audio_l3_bitrate;
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
+ return mpeg_audio_ac3_bitrate;
+ case V4L2_CID_MPEG_AUDIO_MODE:
+ return mpeg_audio_mode;
+ case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
+ return mpeg_audio_mode_extension;
+ case V4L2_CID_MPEG_AUDIO_EMPHASIS:
+ return mpeg_audio_emphasis;
+ case V4L2_CID_MPEG_AUDIO_CRC:
+ return mpeg_audio_crc;
+ case V4L2_CID_MPEG_VIDEO_ENCODING:
+ return mpeg_video_encoding;
+ case V4L2_CID_MPEG_VIDEO_ASPECT:
+ return mpeg_video_aspect;
+ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
+ return mpeg_video_bitrate_mode;
+ case V4L2_CID_MPEG_STREAM_TYPE:
+ return mpeg_stream_type;
+ case V4L2_CID_MPEG_STREAM_VBI_FMT:
+ return mpeg_stream_vbi_fmt;
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ return camera_power_line_frequency;
+ case V4L2_CID_EXPOSURE_AUTO:
+ return camera_exposure_auto;
+ case V4L2_CID_COLORFX:
+ return colorfx;
+ case V4L2_CID_TUNE_PREEMPHASIS:
+ return tune_preemphasis;
+ default:
+ return NULL;
+ }
+}
+EXPORT_SYMBOL(v4l2_ctrl_get_menu);
+
+/* Return the control name. */
+const char *v4l2_ctrl_get_name(u32 id)
+{
+ switch (id) {
+ /* USER controls */
+ /* Keep the order of the 'case's the same as in videodev2.h! */
+ case V4L2_CID_USER_CLASS: return "User Controls";
+ case V4L2_CID_BRIGHTNESS: return "Brightness";
+ case V4L2_CID_CONTRAST: return "Contrast";
+ case V4L2_CID_SATURATION: return "Saturation";
+ case V4L2_CID_HUE: return "Hue";
+ case V4L2_CID_AUDIO_VOLUME: return "Volume";
+ case V4L2_CID_AUDIO_BALANCE: return "Balance";
+ case V4L2_CID_AUDIO_BASS: return "Bass";
+ case V4L2_CID_AUDIO_TREBLE: return "Treble";
+ case V4L2_CID_AUDIO_MUTE: return "Mute";
+ case V4L2_CID_AUDIO_LOUDNESS: return "Loudness";
+ case V4L2_CID_BLACK_LEVEL: return "Black Level";
+ case V4L2_CID_AUTO_WHITE_BALANCE: return "White Balance, Automatic";
+ case V4L2_CID_DO_WHITE_BALANCE: return "Do White Balance";
+ case V4L2_CID_RED_BALANCE: return "Red Balance";
+ case V4L2_CID_BLUE_BALANCE: return "Blue Balance";
+ case V4L2_CID_GAMMA: return "Gamma";
+ case V4L2_CID_EXPOSURE: return "Exposure";
+ case V4L2_CID_AUTOGAIN: return "Gain, Automatic";
+ case V4L2_CID_GAIN: return "Gain";
+ case V4L2_CID_HFLIP: return "Horizontal Flip";
+ case V4L2_CID_VFLIP: return "Vertical Flip";
+ case V4L2_CID_HCENTER: return "Horizontal Center";
+ case V4L2_CID_VCENTER: return "Vertical Center";
+ case V4L2_CID_POWER_LINE_FREQUENCY: return "Power Line Frequency";
+ case V4L2_CID_HUE_AUTO: return "Hue, Automatic";
+ case V4L2_CID_WHITE_BALANCE_TEMPERATURE: return "White Balance Temperature";
+ case V4L2_CID_SHARPNESS: return "Sharpness";
+ case V4L2_CID_BACKLIGHT_COMPENSATION: return "Backlight Compensation";
+ case V4L2_CID_CHROMA_AGC: return "Chroma AGC";
+ case V4L2_CID_COLOR_KILLER: return "Color Killer";
+ case V4L2_CID_COLORFX: return "Color Effects";
+ case V4L2_CID_AUTOBRIGHTNESS: return "Brightness, Automatic";
+ case V4L2_CID_BAND_STOP_FILTER: return "Band-Stop Filter";
+ case V4L2_CID_ROTATE: return "Rotate";
+ case V4L2_CID_BG_COLOR: return "Background Color";
+ case V4L2_CID_CHROMA_GAIN: return "Chroma Gain";
+
+ /* MPEG controls */
+ /* Keep the order of the 'case's the same as in videodev2.h! */
+ case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls";
+ case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type";
+ case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID";
+ case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID";
+ case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID";
+ case V4L2_CID_MPEG_STREAM_VBI_FMT: return "Stream VBI Format";
+ case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency";
+ case V4L2_CID_MPEG_AUDIO_ENCODING: return "Audio Encoding";
+ case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate";
+ case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate";
+ case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate";
+ case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode";
+ case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension";
+ case V4L2_CID_MPEG_AUDIO_EMPHASIS: return "Audio Emphasis";
+ case V4L2_CID_MPEG_AUDIO_CRC: return "Audio CRC";
+ case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute";
+ case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate";
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate";
+ case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding";
+ case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect";
+ case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames";
+ case V4L2_CID_MPEG_VIDEO_GOP_SIZE: return "Video GOP Size";
+ case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: return "Video GOP Closure";
+ case V4L2_CID_MPEG_VIDEO_PULLDOWN: return "Video Pulldown";
+ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: return "Video Bitrate Mode";
+ case V4L2_CID_MPEG_VIDEO_BITRATE: return "Video Bitrate";
+ case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: return "Video Peak Bitrate";
+ case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
+ case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute";
+ case V4L2_CID_MPEG_VIDEO_MUTE_YUV: return "Video Mute YUV";
+
+ /* CAMERA controls */
+ /* Keep the order of the 'case's the same as in videodev2.h! */
+ case V4L2_CID_CAMERA_CLASS: return "Camera Controls";
+ case V4L2_CID_EXPOSURE_AUTO: return "Auto Exposure";
+ case V4L2_CID_EXPOSURE_ABSOLUTE: return "Exposure Time, Absolute";
+ case V4L2_CID_EXPOSURE_AUTO_PRIORITY: return "Exposure, Dynamic Framerate";
+ case V4L2_CID_PAN_RELATIVE: return "Pan, Relative";
+ case V4L2_CID_TILT_RELATIVE: return "Tilt, Relative";
+ case V4L2_CID_PAN_RESET: return "Pan, Reset";
+ case V4L2_CID_TILT_RESET: return "Tilt, Reset";
+ case V4L2_CID_PAN_ABSOLUTE: return "Pan, Absolute";
+ case V4L2_CID_TILT_ABSOLUTE: return "Tilt, Absolute";
+ case V4L2_CID_FOCUS_ABSOLUTE: return "Focus, Absolute";
+ case V4L2_CID_FOCUS_RELATIVE: return "Focus, Relative";
+ case V4L2_CID_FOCUS_AUTO: return "Focus, Automatic";
+ case V4L2_CID_ZOOM_ABSOLUTE: return "Zoom, Absolute";
+ case V4L2_CID_ZOOM_RELATIVE: return "Zoom, Relative";
+ case V4L2_CID_ZOOM_CONTINUOUS: return "Zoom, Continuous";
+ case V4L2_CID_PRIVACY: return "Privacy";
+ case V4L2_CID_IRIS_ABSOLUTE: return "Iris, Absolute";
+ case V4L2_CID_IRIS_RELATIVE: return "Iris, Relative";
+
+ /* FM Radio Modulator control */
+ /* Keep the order of the 'case's the same as in videodev2.h! */
+ case V4L2_CID_FM_TX_CLASS: return "FM Radio Modulator Controls";
+ case V4L2_CID_RDS_TX_DEVIATION: return "RDS Signal Deviation";
+ case V4L2_CID_RDS_TX_PI: return "RDS Program ID";
+ case V4L2_CID_RDS_TX_PTY: return "RDS Program Type";
+ case V4L2_CID_RDS_TX_PS_NAME: return "RDS PS Name";
+ case V4L2_CID_RDS_TX_RADIO_TEXT: return "RDS Radio Text";
+ case V4L2_CID_AUDIO_LIMITER_ENABLED: return "Audio Limiter Feature Enabled";
+ case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME: return "Audio Limiter Release Time";
+ case V4L2_CID_AUDIO_LIMITER_DEVIATION: return "Audio Limiter Deviation";
+ case V4L2_CID_AUDIO_COMPRESSION_ENABLED: return "Audio Compression Feature Enabled";
+ case V4L2_CID_AUDIO_COMPRESSION_GAIN: return "Audio Compression Gain";
+ case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD: return "Audio Compression Threshold";
+ case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME: return "Audio Compression Attack Time";
+ case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME: return "Audio Compression Release Time";
+ case V4L2_CID_PILOT_TONE_ENABLED: return "Pilot Tone Feature Enabled";
+ case V4L2_CID_PILOT_TONE_DEVIATION: return "Pilot Tone Deviation";
+ case V4L2_CID_PILOT_TONE_FREQUENCY: return "Pilot Tone Frequency";
+ case V4L2_CID_TUNE_PREEMPHASIS: return "Pre-emphasis settings";
+ case V4L2_CID_TUNE_POWER_LEVEL: return "Tune Power Level";
+ case V4L2_CID_TUNE_ANTENNA_CAPACITOR: return "Tune Antenna Capacitor";
+
+ default:
+ return NULL;
+ }
+}
+EXPORT_SYMBOL(v4l2_ctrl_get_name);
+
+void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
+ s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags)
+{
+ *name = v4l2_ctrl_get_name(id);
+ *flags = 0;
+
+ switch (id) {
+ case V4L2_CID_AUDIO_MUTE:
+ case V4L2_CID_AUDIO_LOUDNESS:
+ case V4L2_CID_AUTO_WHITE_BALANCE:
+ case V4L2_CID_AUTOGAIN:
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HUE_AUTO:
+ case V4L2_CID_CHROMA_AGC:
+ case V4L2_CID_COLOR_KILLER:
+ case V4L2_CID_MPEG_AUDIO_MUTE:
+ case V4L2_CID_MPEG_VIDEO_MUTE:
+ case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
+ case V4L2_CID_MPEG_VIDEO_PULLDOWN:
+ case V4L2_CID_EXPOSURE_AUTO_PRIORITY:
+ case V4L2_CID_FOCUS_AUTO:
+ case V4L2_CID_PRIVACY:
+ case V4L2_CID_AUDIO_LIMITER_ENABLED:
+ case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
+ case V4L2_CID_PILOT_TONE_ENABLED:
+ *type = V4L2_CTRL_TYPE_BOOLEAN;
+ *min = 0;
+ *max = *step = 1;
+ break;
+ case V4L2_CID_PAN_RESET:
+ case V4L2_CID_TILT_RESET:
+ *type = V4L2_CTRL_TYPE_BUTTON;
+ *flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
+ *min = *max = *step = *def = 0;
+ break;
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
+ case V4L2_CID_MPEG_AUDIO_ENCODING:
+ case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
+ case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
+ case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
+ case V4L2_CID_MPEG_AUDIO_MODE:
+ case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
+ case V4L2_CID_MPEG_AUDIO_EMPHASIS:
+ case V4L2_CID_MPEG_AUDIO_CRC:
+ case V4L2_CID_MPEG_VIDEO_ENCODING:
+ case V4L2_CID_MPEG_VIDEO_ASPECT:
+ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
+ case V4L2_CID_MPEG_STREAM_TYPE:
+ case V4L2_CID_MPEG_STREAM_VBI_FMT:
+ case V4L2_CID_EXPOSURE_AUTO:
+ case V4L2_CID_COLORFX:
+ case V4L2_CID_TUNE_PREEMPHASIS:
+ *type = V4L2_CTRL_TYPE_MENU;
+ break;
+ case V4L2_CID_RDS_TX_PS_NAME:
+ case V4L2_CID_RDS_TX_RADIO_TEXT:
+ *type = V4L2_CTRL_TYPE_STRING;
+ break;
+ case V4L2_CID_USER_CLASS:
+ case V4L2_CID_CAMERA_CLASS:
+ case V4L2_CID_MPEG_CLASS:
+ case V4L2_CID_FM_TX_CLASS:
+ *type = V4L2_CTRL_TYPE_CTRL_CLASS;
+ /* You can neither read not write these */
+ *flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;
+ *min = *max = *step = *def = 0;
+ break;
+ case V4L2_CID_BG_COLOR:
+ *type = V4L2_CTRL_TYPE_INTEGER;
+ *step = 1;
+ *min = 0;
+ /* Max is calculated as RGB888 that is 2^24 */
+ *max = 0xFFFFFF;
+ break;
+ default:
+ *type = V4L2_CTRL_TYPE_INTEGER;
+ break;
+ }
+ switch (id) {
+ case V4L2_CID_MPEG_AUDIO_ENCODING:
+ case V4L2_CID_MPEG_AUDIO_MODE:
+ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
+ case V4L2_CID_MPEG_VIDEO_B_FRAMES:
+ case V4L2_CID_MPEG_STREAM_TYPE:
+ *flags |= V4L2_CTRL_FLAG_UPDATE;
+ break;
+ case V4L2_CID_AUDIO_VOLUME:
+ case V4L2_CID_AUDIO_BALANCE:
+ case V4L2_CID_AUDIO_BASS:
+ case V4L2_CID_AUDIO_TREBLE:
+ case V4L2_CID_BRIGHTNESS:
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ case V4L2_CID_RED_BALANCE:
+ case V4L2_CID_BLUE_BALANCE:
+ case V4L2_CID_GAMMA:
+ case V4L2_CID_SHARPNESS:
+ case V4L2_CID_CHROMA_GAIN:
+ case V4L2_CID_RDS_TX_DEVIATION:
+ case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
+ case V4L2_CID_AUDIO_LIMITER_DEVIATION:
+ case V4L2_CID_AUDIO_COMPRESSION_GAIN:
+ case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
+ case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
+ case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
+ case V4L2_CID_PILOT_TONE_DEVIATION:
+ case V4L2_CID_PILOT_TONE_FREQUENCY:
+ case V4L2_CID_TUNE_POWER_LEVEL:
+ case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
+ *flags |= V4L2_CTRL_FLAG_SLIDER;
+ break;
+ case V4L2_CID_PAN_RELATIVE:
+ case V4L2_CID_TILT_RELATIVE:
+ case V4L2_CID_FOCUS_RELATIVE:
+ case V4L2_CID_IRIS_RELATIVE:
+ case V4L2_CID_ZOOM_RELATIVE:
+ *flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
+ break;
+ }
+}
+EXPORT_SYMBOL(v4l2_ctrl_fill);
+
+/* Helper function to determine whether the control type is compatible with
+ VIDIOC_G/S_CTRL. */
+static bool type_is_int(const struct v4l2_ctrl *ctrl)
+{
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_INTEGER64:
+ case V4L2_CTRL_TYPE_STRING:
+ /* Nope, these need v4l2_ext_control */
+ return false;
+ default:
+ return true;
+ }
+}
+
+/* Helper function: copy the current control value back to the caller */
+static int cur_to_user(struct v4l2_ext_control *c,
+ struct v4l2_ctrl *ctrl)
+{
+ u32 len;
+
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_STRING:
+ len = strlen(ctrl->cur.string);
+ if (c->size < len + 1) {
+ c->size = len + 1;
+ return -ENOSPC;
+ }
+ return copy_to_user(c->string, ctrl->cur.string,
+ len + 1) ? -EFAULT : 0;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ c->value64 = ctrl->cur.val64;
+ break;
+ default:
+ c->value = ctrl->cur.val;
+ break;
+ }
+ return 0;
+}
+
+/* Helper function: copy the caller-provider value as the new control value */
+static int user_to_new(struct v4l2_ext_control *c,
+ struct v4l2_ctrl *ctrl)
+{
+ int ret;
+ u32 size;
+
+ ctrl->has_new = 1;
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_INTEGER64:
+ ctrl->val64 = c->value64;
+ break;
+ case V4L2_CTRL_TYPE_STRING:
+ size = c->size;
+ if (size == 0)
+ return -ERANGE;
+ if (size > ctrl->maximum + 1)
+ size = ctrl->maximum + 1;
+ ret = copy_from_user(ctrl->string, c->string, size);
+ if (!ret) {
+ char last = ctrl->string[size - 1];
+
+ ctrl->string[size - 1] = 0;
+ /* If the string was longer than ctrl->maximum,
+ then return an error. */
+ if (strlen(ctrl->string) == ctrl->maximum && last)
+ return -ERANGE;
+ }
+ return ret ? -EFAULT : 0;
+ default:
+ ctrl->val = c->value;
+ break;
+ }
+ return 0;
+}
+
+/* Helper function: copy the new control value back to the caller */
+static int new_to_user(struct v4l2_ext_control *c,
+ struct v4l2_ctrl *ctrl)
+{
+ u32 len;
+
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_STRING:
+ len = strlen(ctrl->string);
+ if (c->size < len + 1) {
+ c->size = ctrl->maximum + 1;
+ return -ENOSPC;
+ }
+ return copy_to_user(c->string, ctrl->string,
+ len + 1) ? -EFAULT : 0;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ c->value64 = ctrl->val64;
+ break;
+ default:
+ c->value = ctrl->val;
+ break;
+ }
+ return 0;
+}
+
+/* Copy the new value to the current value. */
+static void new_to_cur(struct v4l2_ctrl *ctrl)
+{
+ if (ctrl == NULL)
+ return;
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_STRING:
+ /* strings are always 0-terminated */
+ strcpy(ctrl->cur.string, ctrl->string);
+ break;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ ctrl->cur.val64 = ctrl->val64;
+ break;
+ default:
+ ctrl->cur.val = ctrl->val;
+ break;
+ }
+}
+
+/* Copy the current value to the new value */
+static void cur_to_new(struct v4l2_ctrl *ctrl)
+{
+ if (ctrl == NULL)
+ return;
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_STRING:
+ /* strings are always 0-terminated */
+ strcpy(ctrl->string, ctrl->cur.string);
+ break;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ ctrl->val64 = ctrl->cur.val64;
+ break;
+ default:
+ ctrl->val = ctrl->cur.val;
+ break;
+ }
+}
+
+/* Return non-zero if one or more of the controls in the cluster has a new
+ value that differs from the current value. */
+static int cluster_changed(struct v4l2_ctrl *master)
+{
+ int diff = 0;
+ int i;
+
+ for (i = 0; !diff && i < master->ncontrols; i++) {
+ struct v4l2_ctrl *ctrl = master->cluster[i];
+
+ if (ctrl == NULL)
+ continue;
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_BUTTON:
+ /* Button controls are always 'different' */
+ return 1;
+ case V4L2_CTRL_TYPE_STRING:
+ /* strings are always 0-terminated */
+ diff = strcmp(ctrl->string, ctrl->cur.string);
+ break;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ diff = ctrl->val64 != ctrl->cur.val64;
+ break;
+ default:
+ diff = ctrl->val != ctrl->cur.val;
+ break;
+ }
+ }
+ return diff;
+}
+
+/* Validate a new control */
+static int validate_new(struct v4l2_ctrl *ctrl)
+{
+ s32 val = ctrl->val;
+ char *s = ctrl->string;
+ u32 offset;
+ size_t len;
+
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_INTEGER:
+ /* Round towards the closest legal value */
+ val += ctrl->step / 2;
+ if (val < ctrl->minimum)
+ val = ctrl->minimum;
+ if (val > ctrl->maximum)
+ val = ctrl->maximum;
+ offset = val - ctrl->minimum;
+ offset = ctrl->step * (offset / ctrl->step);
+ val = ctrl->minimum + offset;
+ ctrl->val = val;
+ return 0;
+
+ case V4L2_CTRL_TYPE_BOOLEAN:
+ ctrl->val = !!ctrl->val;
+ return 0;
+
+ case V4L2_CTRL_TYPE_MENU:
+ if (val < ctrl->minimum || val > ctrl->maximum)
+ return -ERANGE;
+ if (ctrl->qmenu[val][0] == '\0' ||
+ (ctrl->menu_skip_mask & (1 << val)))
+ return -EINVAL;
+ return 0;
+
+ case V4L2_CTRL_TYPE_BUTTON:
+ case V4L2_CTRL_TYPE_CTRL_CLASS:
+ ctrl->val64 = 0;
+ return 0;
+
+ case V4L2_CTRL_TYPE_INTEGER64:
+ return 0;
+
+ case V4L2_CTRL_TYPE_STRING:
+ len = strlen(s);
+ if (len < ctrl->minimum)
+ return -ERANGE;
+ if ((len - ctrl->minimum) % ctrl->step)
+ return -ERANGE;
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static inline u32 node2id(struct list_head *node)
+{
+ return list_entry(node, struct v4l2_ctrl_ref, node)->ctrl->id;
+}
+
+/* Set the handler's error code if it wasn't set earlier already */
+static inline int handler_set_err(struct v4l2_ctrl_handler *hdl, int err)
+{
+ if (hdl->error == 0)
+ hdl->error = err;
+ return err;
+}
+
+/* Initialize the handler */
+int v4l2_ctrl_handler_init(struct v4l2_ctrl_handler *hdl,
+ unsigned nr_of_controls_hint)
+{
+ mutex_init(&hdl->lock);
+ INIT_LIST_HEAD(&hdl->ctrls);
+ INIT_LIST_HEAD(&hdl->ctrl_refs);
+ hdl->nr_of_buckets = 1 + nr_of_controls_hint / 8;
+ hdl->buckets = kzalloc(sizeof(hdl->buckets[0]) * hdl->nr_of_buckets,
+ GFP_KERNEL);
+ hdl->error = hdl->buckets ? 0 : -ENOMEM;
+ return hdl->error;
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_init);
+
+/* Free all controls and control refs */
+void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
+{
+ struct v4l2_ctrl_ref *ref, *next_ref;
+ struct v4l2_ctrl *ctrl, *next_ctrl;
+
+ if (hdl == NULL || hdl->buckets == NULL)
+ return;
+
+ mutex_lock(&hdl->lock);
+ /* Free all nodes */
+ list_for_each_entry_safe(ref, next_ref, &hdl->ctrl_refs, node) {
+ list_del(&ref->node);
+ kfree(ref);
+ }
+ /* Free all controls owned by the handler */
+ list_for_each_entry_safe(ctrl, next_ctrl, &hdl->ctrls, node) {
+ list_del(&ctrl->node);
+ kfree(ctrl);
+ }
+ kfree(hdl->buckets);
+ hdl->buckets = NULL;
+ hdl->cached = NULL;
+ hdl->error = 0;
+ mutex_unlock(&hdl->lock);
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_free);
+
+/* For backwards compatibility: V4L2_CID_PRIVATE_BASE should no longer
+ be used except in G_CTRL, S_CTRL, QUERYCTRL and QUERYMENU when dealing
+ with applications that do not use the NEXT_CTRL flag.
+
+ We just find the n-th private user control. It's O(N), but that should not
+ be an issue in this particular case. */
+static struct v4l2_ctrl_ref *find_private_ref(
+ struct v4l2_ctrl_handler *hdl, u32 id)
+{
+ struct v4l2_ctrl_ref *ref;
+
+ id -= V4L2_CID_PRIVATE_BASE;
+ list_for_each_entry(ref, &hdl->ctrl_refs, node) {
+ /* Search for private user controls that are compatible with
+ VIDIOC_G/S_CTRL. */
+ if (V4L2_CTRL_ID2CLASS(ref->ctrl->id) == V4L2_CTRL_CLASS_USER &&
+ V4L2_CTRL_DRIVER_PRIV(ref->ctrl->id)) {
+ if (!type_is_int(ref->ctrl))
+ continue;
+ if (id == 0)
+ return ref;
+ id--;
+ }
+ }
+ return NULL;
+}
+
+/* Find a control with the given ID. */
+static struct v4l2_ctrl_ref *find_ref(struct v4l2_ctrl_handler *hdl, u32 id)
+{
+ struct v4l2_ctrl_ref *ref;
+ int bucket;
+
+ id &= V4L2_CTRL_ID_MASK;
+
+ /* Old-style private controls need special handling */
+ if (id >= V4L2_CID_PRIVATE_BASE)
+ return find_private_ref(hdl, id);
+ bucket = id % hdl->nr_of_buckets;
+
+ /* Simple optimization: cache the last control found */
+ if (hdl->cached && hdl->cached->ctrl->id == id)
+ return hdl->cached;
+
+ /* Not in cache, search the hash */
+ ref = hdl->buckets ? hdl->buckets[bucket] : NULL;
+ while (ref && ref->ctrl->id != id)
+ ref = ref->next;
+
+ if (ref)
+ hdl->cached = ref; /* cache it! */
+ return ref;
+}
+
+/* Find a control with the given ID. Take the handler's lock first. */
+static struct v4l2_ctrl_ref *find_ref_lock(
+ struct v4l2_ctrl_handler *hdl, u32 id)
+{
+ struct v4l2_ctrl_ref *ref = NULL;
+
+ if (hdl) {
+ mutex_lock(&hdl->lock);
+ ref = find_ref(hdl, id);
+ mutex_unlock(&hdl->lock);
+ }
+ return ref;
+}
+
+/* Find a control with the given ID. */
+struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id)
+{
+ struct v4l2_ctrl_ref *ref = find_ref_lock(hdl, id);
+
+ return ref ? ref->ctrl : NULL;
+}
+EXPORT_SYMBOL(v4l2_ctrl_find);
+
+/* Allocate a new v4l2_ctrl_ref and hook it into the handler. */
+static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ctrl *ctrl)
+{
+ struct v4l2_ctrl_ref *ref;
+ struct v4l2_ctrl_ref *new_ref;
+ u32 id = ctrl->id;
+ u32 class_ctrl = V4L2_CTRL_ID2CLASS(id) | 1;
+ int bucket = id % hdl->nr_of_buckets; /* which bucket to use */
+
+ /* Automatically add the control class if it is not yet present. */
+ if (id != class_ctrl && find_ref_lock(hdl, class_ctrl) == NULL)
+ if (!v4l2_ctrl_new_std(hdl, NULL, class_ctrl, 0, 0, 0, 0))
+ return hdl->error;
+
+ if (hdl->error)
+ return hdl->error;
+
+ new_ref = kzalloc(sizeof(*new_ref), GFP_KERNEL);
+ if (!new_ref)
+ return handler_set_err(hdl, -ENOMEM);
+ new_ref->ctrl = ctrl;
+ if (ctrl->handler == hdl) {
+ /* By default each control starts in a cluster of its own.
+ new_ref->ctrl is basically a cluster array with one
+ element, so that's perfect to use as the cluster pointer.
+ But only do this for the handler that owns the control. */
+ ctrl->cluster = &new_ref->ctrl;
+ ctrl->ncontrols = 1;
+ }
+
+ INIT_LIST_HEAD(&new_ref->node);
+
+ mutex_lock(&hdl->lock);
+
+ /* Add immediately at the end of the list if the list is empty, or if
+ the last element in the list has a lower ID.
+ This ensures that when elements are added in ascending order the
+ insertion is an O(1) operation. */
+ if (list_empty(&hdl->ctrl_refs) || id > node2id(hdl->ctrl_refs.prev)) {
+ list_add_tail(&new_ref->node, &hdl->ctrl_refs);
+ goto insert_in_hash;
+ }
+
+ /* Find insert position in sorted list */
+ list_for_each_entry(ref, &hdl->ctrl_refs, node) {
+ if (ref->ctrl->id < id)
+ continue;
+ /* Don't add duplicates */
+ if (ref->ctrl->id == id) {
+ kfree(new_ref);
+ goto unlock;
+ }
+ list_add(&new_ref->node, ref->node.prev);
+ break;
+ }
+
+insert_in_hash:
+ /* Insert the control node in the hash */
+ new_ref->next = hdl->buckets[bucket];
+ hdl->buckets[bucket] = new_ref;
+
+unlock:
+ mutex_unlock(&hdl->lock);
+ return 0;
+}
+
+/* Add a new control */
+static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, const char *name, enum v4l2_ctrl_type type,
+ s32 min, s32 max, u32 step, s32 def,
+ u32 flags, const char **qmenu, void *priv)
+{
+ struct v4l2_ctrl *ctrl;
+ unsigned sz_extra = 0;
+
+ if (hdl->error)
+ return NULL;
+
+ /* Sanity checks */
+ if (id == 0 || name == NULL || id >= V4L2_CID_PRIVATE_BASE ||
+ def < min || def > max || max < min ||
+ (type == V4L2_CTRL_TYPE_INTEGER && step == 0) ||
+ (type == V4L2_CTRL_TYPE_MENU && qmenu == NULL) ||
+ (type == V4L2_CTRL_TYPE_STRING && max == 0)) {
+ handler_set_err(hdl, -ERANGE);
+ return NULL;
+ }
+
+ if (type == V4L2_CTRL_TYPE_BUTTON)
+ flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
+ else if (type == V4L2_CTRL_TYPE_CTRL_CLASS)
+ flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ else if (type == V4L2_CTRL_TYPE_STRING)
+ sz_extra += 2 * (max + 1);
+
+ ctrl = kzalloc(sizeof(*ctrl) + sz_extra, GFP_KERNEL);
+ if (ctrl == NULL) {
+ handler_set_err(hdl, -ENOMEM);
+ return NULL;
+ }
+
+ INIT_LIST_HEAD(&ctrl->node);
+ ctrl->handler = hdl;
+ ctrl->ops = ops;
+ ctrl->id = id;
+ ctrl->name = name;
+ ctrl->type = type;
+ ctrl->flags = flags;
+ ctrl->minimum = min;
+ ctrl->maximum = max;
+ ctrl->step = step;
+ ctrl->qmenu = qmenu;
+ ctrl->priv = priv;
+ ctrl->cur.val = ctrl->val = ctrl->default_value = def;
+
+ if (ctrl->type == V4L2_CTRL_TYPE_STRING) {
+ ctrl->cur.string = (char *)&ctrl[1] + sz_extra - (max + 1);
+ ctrl->string = (char *)&ctrl[1] + sz_extra - 2 * (max + 1);
+ if (ctrl->minimum)
+ memset(ctrl->cur.string, ' ', ctrl->minimum);
+ }
+ if (handler_new_ref(hdl, ctrl)) {
+ kfree(ctrl);
+ return NULL;
+ }
+ mutex_lock(&hdl->lock);
+ list_add_tail(&ctrl->node, &hdl->ctrls);
+ mutex_unlock(&hdl->lock);
+ return ctrl;
+}
+
+struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_config *cfg, void *priv)
+{
+ bool is_menu;
+ struct v4l2_ctrl *ctrl;
+ const char *name = cfg->name;
+ const char **qmenu = cfg->qmenu;
+ enum v4l2_ctrl_type type = cfg->type;
+ u32 flags = cfg->flags;
+ s32 min = cfg->min;
+ s32 max = cfg->max;
+ u32 step = cfg->step;
+ s32 def = cfg->def;
+
+ if (name == NULL)
+ v4l2_ctrl_fill(cfg->id, &name, &type, &min, &max, &step,
+ &def, &flags);
+
+ is_menu = (cfg->type == V4L2_CTRL_TYPE_MENU);
+ if (is_menu)
+ WARN_ON(step);
+ else
+ WARN_ON(cfg->menu_skip_mask);
+ if (is_menu && qmenu == NULL)
+ qmenu = v4l2_ctrl_get_menu(cfg->id);
+
+ ctrl = v4l2_ctrl_new(hdl, cfg->ops, cfg->id, name,
+ type, min, max,
+ is_menu ? cfg->menu_skip_mask : step,
+ def, flags, qmenu, priv);
+ if (ctrl) {
+ ctrl->is_private = cfg->is_private;
+ ctrl->is_volatile = cfg->is_volatile;
+ }
+ return ctrl;
+}
+EXPORT_SYMBOL(v4l2_ctrl_new_custom);
+
+/* Helper function for standard non-menu controls */
+struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 min, s32 max, u32 step, s32 def)
+{
+ const char *name;
+ enum v4l2_ctrl_type type;
+ u32 flags;
+
+ v4l2_ctrl_fill(id, &name, &type, &min, &max, &step, &def, &flags);
+ if (type == V4L2_CTRL_TYPE_MENU) {
+ handler_set_err(hdl, -EINVAL);
+ return NULL;
+ }
+ return v4l2_ctrl_new(hdl, ops, id, name, type,
+ min, max, step, def, flags, NULL, NULL);
+}
+EXPORT_SYMBOL(v4l2_ctrl_new_std);
+
+/* Helper function for standard menu controls */
+struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 max, s32 mask, s32 def)
+{
+ const char **qmenu = v4l2_ctrl_get_menu(id);
+ const char *name;
+ enum v4l2_ctrl_type type;
+ s32 min;
+ s32 step;
+ u32 flags;
+
+ v4l2_ctrl_fill(id, &name, &type, &min, &max, &step, &def, &flags);
+ if (type != V4L2_CTRL_TYPE_MENU) {
+ handler_set_err(hdl, -EINVAL);
+ return NULL;
+ }
+ return v4l2_ctrl_new(hdl, ops, id, name, type,
+ 0, max, mask, def, flags, qmenu, NULL);
+}
+EXPORT_SYMBOL(v4l2_ctrl_new_std_menu);
+
+/* Add a control from another handler to this handler */
+struct v4l2_ctrl *v4l2_ctrl_add_ctrl(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ctrl *ctrl)
+{
+ if (hdl == NULL || hdl->error)
+ return NULL;
+ if (ctrl == NULL) {
+ handler_set_err(hdl, -EINVAL);
+ return NULL;
+ }
+ if (ctrl->handler == hdl)
+ return ctrl;
+ return handler_new_ref(hdl, ctrl) ? NULL : ctrl;
+}
+EXPORT_SYMBOL(v4l2_ctrl_add_ctrl);
+
+/* Add the controls from another handler to our own. */
+int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ctrl_handler *add)
+{
+ struct v4l2_ctrl *ctrl;
+ int ret = 0;
+
+ /* Do nothing if either handler is NULL or if they are the same */
+ if (!hdl || !add || hdl == add)
+ return 0;
+ if (hdl->error)
+ return hdl->error;
+ mutex_lock(&add->lock);
+ list_for_each_entry(ctrl, &add->ctrls, node) {
+ /* Skip handler-private controls. */
+ if (ctrl->is_private)
+ continue;
+ ret = handler_new_ref(hdl, ctrl);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&add->lock);
+ return ret;
+}
+EXPORT_SYMBOL(v4l2_ctrl_add_handler);
+
+/* Cluster controls */
+void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls)
+{
+ int i;
+
+ /* The first control is the master control and it must not be NULL */
+ BUG_ON(controls[0] == NULL);
+
+ for (i = 0; i < ncontrols; i++) {
+ if (controls[i]) {
+ controls[i]->cluster = controls;
+ controls[i]->ncontrols = ncontrols;
+ }
+ }
+}
+EXPORT_SYMBOL(v4l2_ctrl_cluster);
+
+/* Activate/deactivate a control. */
+void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active)
+{
+ if (ctrl == NULL)
+ return;
+
+ if (!active)
+ /* set V4L2_CTRL_FLAG_INACTIVE */
+ set_bit(4, &ctrl->flags);
+ else
+ /* clear V4L2_CTRL_FLAG_INACTIVE */
+ clear_bit(4, &ctrl->flags);
+}
+EXPORT_SYMBOL(v4l2_ctrl_activate);
+
+/* Grab/ungrab a control.
+ Typically used when streaming starts and you want to grab controls,
+ preventing the user from changing them.
+
+ Just call this and the framework will block any attempts to change
+ these controls. */
+void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed)
+{
+ if (ctrl == NULL)
+ return;
+
+ if (grabbed)
+ /* set V4L2_CTRL_FLAG_GRABBED */
+ set_bit(1, &ctrl->flags);
+ else
+ /* clear V4L2_CTRL_FLAG_GRABBED */
+ clear_bit(1, &ctrl->flags);
+}
+EXPORT_SYMBOL(v4l2_ctrl_grab);
+
+/* Log the control name and value */
+static void log_ctrl(const struct v4l2_ctrl *ctrl,
+ const char *prefix, const char *colon)
+{
+ int fl_inact = ctrl->flags & V4L2_CTRL_FLAG_INACTIVE;
+ int fl_grabbed = ctrl->flags & V4L2_CTRL_FLAG_GRABBED;
+
+ if (ctrl->flags & (V4L2_CTRL_FLAG_DISABLED | V4L2_CTRL_FLAG_WRITE_ONLY))
+ return;
+ if (ctrl->type == V4L2_CTRL_TYPE_CTRL_CLASS)
+ return;
+
+ printk(KERN_INFO "%s%s%s: ", prefix, colon, ctrl->name);
+
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_INTEGER:
+ printk(KERN_CONT "%d", ctrl->cur.val);
+ break;
+ case V4L2_CTRL_TYPE_BOOLEAN:
+ printk(KERN_CONT "%s", ctrl->cur.val ? "true" : "false");
+ break;
+ case V4L2_CTRL_TYPE_MENU:
+ printk(KERN_CONT "%s", ctrl->qmenu[ctrl->cur.val]);
+ break;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ printk(KERN_CONT "%lld", ctrl->cur.val64);
+ break;
+ case V4L2_CTRL_TYPE_STRING:
+ printk(KERN_CONT "%s", ctrl->cur.string);
+ break;
+ default:
+ printk(KERN_CONT "unknown type %d", ctrl->type);
+ break;
+ }
+ if (fl_inact && fl_grabbed)
+ printk(KERN_CONT " (inactive, grabbed)\n");
+ else if (fl_inact)
+ printk(KERN_CONT " (inactive)\n");
+ else if (fl_grabbed)
+ printk(KERN_CONT " (grabbed)\n");
+ else
+ printk(KERN_CONT "\n");
+}
+
+/* Log all controls owned by the handler */
+void v4l2_ctrl_handler_log_status(struct v4l2_ctrl_handler *hdl,
+ const char *prefix)
+{
+ struct v4l2_ctrl *ctrl;
+ const char *colon = "";
+ int len;
+
+ if (hdl == NULL)
+ return;
+ if (prefix == NULL)
+ prefix = "";
+ len = strlen(prefix);
+ if (len && prefix[len - 1] != ' ')
+ colon = ": ";
+ mutex_lock(&hdl->lock);
+ list_for_each_entry(ctrl, &hdl->ctrls, node)
+ if (!(ctrl->flags & V4L2_CTRL_FLAG_DISABLED))
+ log_ctrl(ctrl, prefix, colon);
+ mutex_unlock(&hdl->lock);
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_log_status);
+
+/* Call s_ctrl for all controls owned by the handler */
+int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
+{
+ struct v4l2_ctrl *ctrl;
+ int ret = 0;
+
+ if (hdl == NULL)
+ return 0;
+ mutex_lock(&hdl->lock);
+ list_for_each_entry(ctrl, &hdl->ctrls, node)
+ ctrl->done = false;
+
+ list_for_each_entry(ctrl, &hdl->ctrls, node) {
+ struct v4l2_ctrl *master = ctrl->cluster[0];
+ int i;
+
+ /* Skip if this control was already handled by a cluster. */
+ if (ctrl->done)
+ continue;
+
+ for (i = 0; i < master->ncontrols; i++)
+ cur_to_new(master->cluster[i]);
+
+ /* Skip button controls and read-only controls. */
+ if (ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
+ (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
+ continue;
+ ret = master->ops->s_ctrl(master);
+ if (ret)
+ break;
+ for (i = 0; i < master->ncontrols; i++)
+ if (master->cluster[i])
+ master->cluster[i]->done = true;
+ }
+ mutex_unlock(&hdl->lock);
+ return ret;
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_setup);
+
+/* Implement VIDIOC_QUERYCTRL */
+int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc)
+{
+ u32 id = qc->id & V4L2_CTRL_ID_MASK;
+ struct v4l2_ctrl_ref *ref;
+ struct v4l2_ctrl *ctrl;
+
+ if (hdl == NULL)
+ return -EINVAL;
+
+ mutex_lock(&hdl->lock);
+
+ /* Try to find it */
+ ref = find_ref(hdl, id);
+
+ if ((qc->id & V4L2_CTRL_FLAG_NEXT_CTRL) && !list_empty(&hdl->ctrl_refs)) {
+ /* Find the next control with ID > qc->id */
+
+ /* Did we reach the end of the control list? */
+ if (id >= node2id(hdl->ctrl_refs.prev)) {
+ ref = NULL; /* Yes, so there is no next control */
+ } else if (ref) {
+ /* We found a control with the given ID, so just get
+ the next one in the list. */
+ ref = list_entry(ref->node.next, typeof(*ref), node);
+ } else {
+ /* No control with the given ID exists, so start
+ searching for the next largest ID. We know there
+ is one, otherwise the first 'if' above would have
+ been true. */
+ list_for_each_entry(ref, &hdl->ctrl_refs, node)
+ if (id < ref->ctrl->id)
+ break;
+ }
+ }
+ mutex_unlock(&hdl->lock);
+ if (!ref)
+ return -EINVAL;
+
+ ctrl = ref->ctrl;
+ memset(qc, 0, sizeof(*qc));
+ qc->id = ctrl->id;
+ strlcpy(qc->name, ctrl->name, sizeof(qc->name));
+ qc->minimum = ctrl->minimum;
+ qc->maximum = ctrl->maximum;
+ qc->default_value = ctrl->default_value;
+ if (qc->type == V4L2_CTRL_TYPE_MENU)
+ qc->step = 1;
+ else
+ qc->step = ctrl->step;
+ qc->flags = ctrl->flags;
+ qc->type = ctrl->type;
+ return 0;
+}
+EXPORT_SYMBOL(v4l2_queryctrl);
+
+int v4l2_subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+ return v4l2_queryctrl(sd->ctrl_handler, qc);
+}
+EXPORT_SYMBOL(v4l2_subdev_queryctrl);
+
+/* Implement VIDIOC_QUERYMENU */
+int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm)
+{
+ struct v4l2_ctrl *ctrl;
+ u32 i = qm->index;
+
+ ctrl = v4l2_ctrl_find(hdl, qm->id);
+ if (!ctrl)
+ return -EINVAL;
+
+ qm->reserved = 0;
+ /* Sanity checks */
+ if (ctrl->qmenu == NULL ||
+ i < ctrl->minimum || i > ctrl->maximum)
+ return -EINVAL;
+ /* Use mask to see if this menu item should be skipped */
+ if (ctrl->menu_skip_mask & (1 << i))
+ return -EINVAL;
+ /* Empty menu items should also be skipped */
+ if (ctrl->qmenu[i] == NULL || ctrl->qmenu[i][0] == '\0')
+ return -EINVAL;
+ strlcpy(qm->name, ctrl->qmenu[i], sizeof(qm->name));
+ return 0;
+}
+EXPORT_SYMBOL(v4l2_querymenu);
+
+int v4l2_subdev_querymenu(struct v4l2_subdev *sd, struct v4l2_querymenu *qm)
+{
+ return v4l2_querymenu(sd->ctrl_handler, qm);
+}
+EXPORT_SYMBOL(v4l2_subdev_querymenu);
+
+
+
+/* Some general notes on the atomic requirements of VIDIOC_G/TRY/S_EXT_CTRLS:
+
+ It is not a fully atomic operation, just best-effort only. After all, if
+ multiple controls have to be set through multiple i2c writes (for example)
+ then some initial writes may succeed while others fail. Thus leaving the
+ system in an inconsistent state. The question is how much effort you are
+ willing to spend on trying to make something atomic that really isn't.
+
+ From the point of view of an application the main requirement is that
+ when you call VIDIOC_S_EXT_CTRLS and some values are invalid then an
+ error should be returned without actually affecting any controls.
+
+ If all the values are correct, then it is acceptable to just give up
+ in case of low-level errors.
+
+ It is important though that the application can tell when only a partial
+ configuration was done. The way we do that is through the error_idx field
+ of struct v4l2_ext_controls: if that is equal to the count field then no
+ controls were affected. Otherwise all controls before that index were
+ successful in performing their 'get' or 'set' operation, the control at
+ the given index failed, and you don't know what happened with the controls
+ after the failed one. Since if they were part of a control cluster they
+ could have been successfully processed (if a cluster member was encountered
+ at index < error_idx), they could have failed (if a cluster member was at
+ error_idx), or they may not have been processed yet (if the first cluster
+ member appeared after error_idx).
+
+ It is all fairly theoretical, though. In practice all you can do is to
+ bail out. If error_idx == count, then it is an application bug. If
+ error_idx < count then it is only an application bug if the error code was
+ EBUSY. That usually means that something started streaming just when you
+ tried to set the controls. In all other cases it is a driver/hardware
+ problem and all you can do is to retry or bail out.
+
+ Note that these rules do not apply to VIDIOC_TRY_EXT_CTRLS: since that
+ never modifies controls the error_idx is just set to whatever control
+ has an invalid value.
+ */
+
+/* Prepare for the extended g/s/try functions.
+ Find the controls in the control array and do some basic checks. */
+static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ext_controls *cs,
+ struct ctrl_helper *helpers,
+ bool try)
+{
+ u32 i;
+
+ for (i = 0; i < cs->count; i++) {
+ struct v4l2_ext_control *c = &cs->controls[i];
+ struct v4l2_ctrl *ctrl;
+ u32 id = c->id & V4L2_CTRL_ID_MASK;
+
+ if (try)
+ cs->error_idx = i;
+
+ if (cs->ctrl_class && V4L2_CTRL_ID2CLASS(id) != cs->ctrl_class)
+ return -EINVAL;
+
+ /* Old-style private controls are not allowed for
+ extended controls */
+ if (id >= V4L2_CID_PRIVATE_BASE)
+ return -EINVAL;
+ ctrl = v4l2_ctrl_find(hdl, id);
+ if (ctrl == NULL)
+ return -EINVAL;
+ if (ctrl->flags & V4L2_CTRL_FLAG_DISABLED)
+ return -EINVAL;
+
+ helpers[i].ctrl = ctrl;
+ helpers[i].handled = false;
+ }
+ return 0;
+}
+
+typedef int (*cluster_func)(struct v4l2_ext_control *c,
+ struct v4l2_ctrl *ctrl);
+
+/* Walk over all controls in v4l2_ext_controls belonging to the same cluster
+ and call the provided function. */
+static int cluster_walk(unsigned from,
+ struct v4l2_ext_controls *cs,
+ struct ctrl_helper *helpers,
+ cluster_func f)
+{
+ struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
+ int ret = 0;
+ int i;
+
+ /* Find any controls from the same cluster and call the function */
+ for (i = from; !ret && i < cs->count; i++) {
+ struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+
+ if (!helpers[i].handled && ctrl->cluster == cluster)
+ ret = f(&cs->controls[i], ctrl);
+ }
+ return ret;
+}
+
+static void cluster_done(unsigned from,
+ struct v4l2_ext_controls *cs,
+ struct ctrl_helper *helpers)
+{
+ struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
+ int i;
+
+ /* Find any controls from the same cluster and mark them as handled */
+ for (i = from; i < cs->count; i++)
+ if (helpers[i].ctrl->cluster == cluster)
+ helpers[i].handled = true;
+}
+
+/* Handles the corner case where cs->count == 0. It checks whether the
+ specified control class exists. If that class ID is 0, then it checks
+ whether there are any controls at all. */
+static int class_check(struct v4l2_ctrl_handler *hdl, u32 ctrl_class)
+{
+ if (ctrl_class == 0)
+ return list_empty(&hdl->ctrl_refs) ? -EINVAL : 0;
+ return find_ref_lock(hdl, ctrl_class | 1) ? 0 : -EINVAL;
+}
+
+
+
+/* Get extended controls. Allocates the helpers array if needed. */
+int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
+{
+ struct ctrl_helper helper[4];
+ struct ctrl_helper *helpers = helper;
+ int ret;
+ int i;
+
+ cs->error_idx = cs->count;
+ cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
+
+ if (hdl == NULL)
+ return -EINVAL;
+
+ if (cs->count == 0)
+ return class_check(hdl, cs->ctrl_class);
+
+ if (cs->count > ARRAY_SIZE(helper)) {
+ helpers = kmalloc(sizeof(helper[0]) * cs->count, GFP_KERNEL);
+ if (helpers == NULL)
+ return -ENOMEM;
+ }
+
+ ret = prepare_ext_ctrls(hdl, cs, helpers, false);
+
+ for (i = 0; !ret && i < cs->count; i++)
+ if (helpers[i].ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
+ ret = -EACCES;
+
+ for (i = 0; !ret && i < cs->count; i++) {
+ struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+ struct v4l2_ctrl *master = ctrl->cluster[0];
+
+ if (helpers[i].handled)
+ continue;
+
+ cs->error_idx = i;
+
+ v4l2_ctrl_lock(master);
+ /* g_volatile_ctrl will update the current control values */
+ if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
+ ret = master->ops->g_volatile_ctrl(master);
+ /* If OK, then copy the current control values to the caller */
+ if (!ret)
+ ret = cluster_walk(i, cs, helpers, cur_to_user);
+ v4l2_ctrl_unlock(master);
+ cluster_done(i, cs, helpers);
+ }
+
+ if (cs->count > ARRAY_SIZE(helper))
+ kfree(helpers);
+ return ret;
+}
+EXPORT_SYMBOL(v4l2_g_ext_ctrls);
+
+int v4l2_subdev_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
+{
+ return v4l2_g_ext_ctrls(sd->ctrl_handler, cs);
+}
+EXPORT_SYMBOL(v4l2_subdev_g_ext_ctrls);
+
+/* Helper function to get a single control */
+static int get_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
+{
+ struct v4l2_ctrl *master = ctrl->cluster[0];
+ int ret = 0;
+
+ if (ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
+ return -EACCES;
+
+ v4l2_ctrl_lock(master);
+ /* g_volatile_ctrl will update the current control values */
+ if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
+ ret = master->ops->g_volatile_ctrl(master);
+ *val = ctrl->cur.val;
+ v4l2_ctrl_unlock(master);
+ return ret;
+}
+
+int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control)
+{
+ struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id);
+
+ if (ctrl == NULL || !type_is_int(ctrl))
+ return -EINVAL;
+ return get_ctrl(ctrl, &control->value);
+}
+EXPORT_SYMBOL(v4l2_g_ctrl);
+
+int v4l2_subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *control)
+{
+ return v4l2_g_ctrl(sd->ctrl_handler, control);
+}
+EXPORT_SYMBOL(v4l2_subdev_g_ctrl);
+
+s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl)
+{
+ s32 val = 0;
+
+ /* It's a driver bug if this happens. */
+ WARN_ON(!type_is_int(ctrl));
+ get_ctrl(ctrl, &val);
+ return val;
+}
+EXPORT_SYMBOL(v4l2_ctrl_g_ctrl);
+
+
+/* Core function that calls try/s_ctrl and ensures that the new value is
+ copied to the current value on a set.
+ Must be called with ctrl->handler->lock held. */
+static int try_or_set_control_cluster(struct v4l2_ctrl *master, bool set)
+{
+ bool try = !set;
+ int ret = 0;
+ int i;
+
+ /* Go through the cluster and either validate the new value or
+ (if no new value was set), copy the current value to the new
+ value, ensuring a consistent view for the control ops when
+ called. */
+ for (i = 0; !ret && i < master->ncontrols; i++) {
+ struct v4l2_ctrl *ctrl = master->cluster[i];
+
+ if (ctrl == NULL)
+ continue;
+
+ if (ctrl->has_new) {
+ /* Double check this: it may have changed since the
+ last check in try_or_set_ext_ctrls(). */
+ if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
+ return -EBUSY;
+
+ /* Validate if required */
+ if (!set)
+ ret = validate_new(ctrl);
+ continue;
+ }
+ /* No new value was set, so copy the current and force
+ a call to try_ctrl later, since the values for the cluster
+ may now have changed and the end result might be invalid. */
+ try = true;
+ cur_to_new(ctrl);
+ }
+
+ /* For larger clusters you have to call try_ctrl again to
+ verify that the controls are still valid after the
+ 'cur_to_new' above. */
+ if (!ret && master->ops->try_ctrl && try)
+ ret = master->ops->try_ctrl(master);
+
+ /* Don't set if there is no change */
+ if (!ret && set && cluster_changed(master)) {
+ ret = master->ops->s_ctrl(master);
+ /* If OK, then make the new values permanent. */
+ if (!ret)
+ for (i = 0; i < master->ncontrols; i++)
+ new_to_cur(master->cluster[i]);
+ }
+ return ret;
+}
+
+/* Try or set controls. */
+static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ext_controls *cs,
+ struct ctrl_helper *helpers,
+ bool set)
+{
+ unsigned i, j;
+ int ret = 0;
+
+ cs->error_idx = cs->count;
+ for (i = 0; i < cs->count; i++) {
+ struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+
+ if (!set)
+ cs->error_idx = i;
+
+ if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
+ return -EACCES;
+ /* This test is also done in try_set_control_cluster() which
+ is called in atomic context, so that has the final say,
+ but it makes sense to do an up-front check as well. Once
+ an error occurs in try_set_control_cluster() some other
+ controls may have been set already and we want to do a
+ best-effort to avoid that. */
+ if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
+ return -EBUSY;
+ }
+
+ for (i = 0; !ret && i < cs->count; i++) {
+ struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+ struct v4l2_ctrl *master = ctrl->cluster[0];
+
+ cs->error_idx = i;
+
+ if (helpers[i].handled)
+ continue;
+
+ v4l2_ctrl_lock(ctrl);
+
+ /* Reset the 'has_new' flags of the cluster */
+ for (j = 0; j < master->ncontrols; j++)
+ if (master->cluster[j])
+ master->cluster[j]->has_new = 0;
+
+ /* Copy the new caller-supplied control values.
+ user_to_new() sets 'has_new' to 1. */
+ ret = cluster_walk(i, cs, helpers, user_to_new);
+
+ if (!ret)
+ ret = try_or_set_control_cluster(master, set);
+
+ /* Copy the new values back to userspace. */
+ if (!ret)
+ ret = cluster_walk(i, cs, helpers, new_to_user);
+
+ v4l2_ctrl_unlock(ctrl);
+ cluster_done(i, cs, helpers);
+ }
+ return ret;
+}
+
+/* Try or try-and-set controls */
+static int try_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ext_controls *cs,
+ bool set)
+{
+ struct ctrl_helper helper[4];
+ struct ctrl_helper *helpers = helper;
+ int ret;
+ int i;
+
+ cs->error_idx = cs->count;
+ cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
+
+ if (hdl == NULL)
+ return -EINVAL;
+
+ if (cs->count == 0)
+ return class_check(hdl, cs->ctrl_class);
+
+ if (cs->count > ARRAY_SIZE(helper)) {
+ helpers = kmalloc(sizeof(helper[0]) * cs->count, GFP_KERNEL);
+ if (!helpers)
+ return -ENOMEM;
+ }
+ ret = prepare_ext_ctrls(hdl, cs, helpers, !set);
+ if (ret)
+ goto free;
+
+ /* First 'try' all controls and abort on error */
+ ret = try_or_set_ext_ctrls(hdl, cs, helpers, false);
+ /* If this is a 'set' operation and the initial 'try' failed,
+ then set error_idx to count to tell the application that no
+ controls changed value yet. */
+ if (set)
+ cs->error_idx = cs->count;
+ if (!ret && set) {
+ /* Reset 'handled' state */
+ for (i = 0; i < cs->count; i++)
+ helpers[i].handled = false;
+ ret = try_or_set_ext_ctrls(hdl, cs, helpers, true);
+ }
+
+free:
+ if (cs->count > ARRAY_SIZE(helper))
+ kfree(helpers);
+ return ret;
+}
+
+int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
+{
+ return try_set_ext_ctrls(hdl, cs, false);
+}
+EXPORT_SYMBOL(v4l2_try_ext_ctrls);
+
+int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
+{
+ return try_set_ext_ctrls(hdl, cs, true);
+}
+EXPORT_SYMBOL(v4l2_s_ext_ctrls);
+
+int v4l2_subdev_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
+{
+ return try_set_ext_ctrls(sd->ctrl_handler, cs, false);
+}
+EXPORT_SYMBOL(v4l2_subdev_try_ext_ctrls);
+
+int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
+{
+ return try_set_ext_ctrls(sd->ctrl_handler, cs, true);
+}
+EXPORT_SYMBOL(v4l2_subdev_s_ext_ctrls);
+
+/* Helper function for VIDIOC_S_CTRL compatibility */
+static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
+{
+ struct v4l2_ctrl *master = ctrl->cluster[0];
+ int ret;
+ int i;
+
+ v4l2_ctrl_lock(ctrl);
+
+ /* Reset the 'has_new' flags of the cluster */
+ for (i = 0; i < master->ncontrols; i++)
+ if (master->cluster[i])
+ master->cluster[i]->has_new = 0;
+
+ ctrl->val = *val;
+ ctrl->has_new = 1;
+ ret = try_or_set_control_cluster(master, false);
+ if (!ret)
+ ret = try_or_set_control_cluster(master, true);
+ *val = ctrl->cur.val;
+ v4l2_ctrl_unlock(ctrl);
+ return ret;
+}
+
+int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control)
+{
+ struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id);
+
+ if (ctrl == NULL || !type_is_int(ctrl))
+ return -EINVAL;
+
+ return set_ctrl(ctrl, &control->value);
+}
+EXPORT_SYMBOL(v4l2_s_ctrl);
+
+int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *control)
+{
+ return v4l2_s_ctrl(sd->ctrl_handler, control);
+}
+EXPORT_SYMBOL(v4l2_subdev_s_ctrl);
+
+int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val)
+{
+ /* It's a driver bug if this happens. */
+ WARN_ON(!type_is_int(ctrl));
+ return set_ctrl(ctrl, &val);
+}
+EXPORT_SYMBOL(v4l2_ctrl_s_ctrl);
#include <linux/init.h>
#include <linux/kmod.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
return vdev->fops->poll(filp, poll);
}
-static int v4l2_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
+static long v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct video_device *vdev = video_devdata(filp);
+ int ret;
- if (!vdev->fops->ioctl)
- return -ENOTTY;
/* Allow ioctl to continue even if the device was unregistered.
Things like dequeueing buffers might still be useful. */
- return vdev->fops->ioctl(filp, cmd, arg);
-}
-
-static long v4l2_unlocked_ioctl(struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- struct video_device *vdev = video_devdata(filp);
+ if (vdev->fops->unlocked_ioctl) {
+ ret = vdev->fops->unlocked_ioctl(filp, cmd, arg);
+ } else if (vdev->fops->ioctl) {
+ /* TODO: convert all drivers to unlocked_ioctl */
+ lock_kernel();
+ ret = vdev->fops->ioctl(filp, cmd, arg);
+ unlock_kernel();
+ } else
+ ret = -ENOTTY;
- if (!vdev->fops->unlocked_ioctl)
- return -ENOTTY;
- /* Allow ioctl to continue even if the device was unregistered.
- Things like dequeueing buffers might still be useful. */
- return vdev->fops->unlocked_ioctl(filp, cmd, arg);
+ return ret;
}
#ifdef CONFIG_MMU
return ret;
}
-static const struct file_operations v4l2_unlocked_fops = {
- .owner = THIS_MODULE,
- .read = v4l2_read,
- .write = v4l2_write,
- .open = v4l2_open,
- .get_unmapped_area = v4l2_get_unmapped_area,
- .mmap = v4l2_mmap,
- .unlocked_ioctl = v4l2_unlocked_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = v4l2_compat_ioctl32,
-#endif
- .release = v4l2_release,
- .poll = v4l2_poll,
- .llseek = no_llseek,
-};
-
static const struct file_operations v4l2_fops = {
.owner = THIS_MODULE,
.read = v4l2_read,
.open = v4l2_open,
.get_unmapped_area = v4l2_get_unmapped_area,
.mmap = v4l2_mmap,
- .ioctl = v4l2_ioctl,
+ .unlocked_ioctl = v4l2_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = v4l2_compat_ioctl32,
#endif
vdev->vfl_type = type;
vdev->cdev = NULL;
- if (vdev->v4l2_dev && vdev->v4l2_dev->dev)
- vdev->parent = vdev->v4l2_dev->dev;
+ if (vdev->v4l2_dev) {
+ if (vdev->v4l2_dev->dev)
+ vdev->parent = vdev->v4l2_dev->dev;
+ if (vdev->ctrl_handler == NULL)
+ vdev->ctrl_handler = vdev->v4l2_dev->ctrl_handler;
+ }
/* Part 2: find a free minor, device node number and device index. */
#ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES
ret = -ENOMEM;
goto cleanup;
}
- if (vdev->fops->unlocked_ioctl)
- vdev->cdev->ops = &v4l2_unlocked_fops;
- else
- vdev->cdev->ops = &v4l2_fops;
+ vdev->cdev->ops = &v4l2_fops;
vdev->cdev->owner = vdev->fops->owner;
ret = cdev_add(vdev->cdev, MKDEV(VIDEO_MAJOR, vdev->minor), 1);
if (ret < 0) {
#endif
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
int v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev)
{
int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
struct v4l2_subdev *sd)
{
+ int err;
+
/* Check for valid input */
if (v4l2_dev == NULL || sd == NULL || !sd->name[0])
return -EINVAL;
WARN_ON(sd->v4l2_dev != NULL);
if (!try_module_get(sd->owner))
return -ENODEV;
+ /* This just returns 0 if either of the two args is NULL */
+ err = v4l2_ctrl_add_handler(v4l2_dev->ctrl_handler, sd->ctrl_handler);
+ if (err)
+ return err;
sd->v4l2_dev = v4l2_dev;
spin_lock(&v4l2_dev->lock);
list_add_tail(&sd->list, &v4l2_dev->subdevs);
#endif
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-fh.h>
#include <media/v4l2-event.h>
#include <media/v4l2-chip-ident.h>
{
struct v4l2_queryctrl *p = arg;
- if (!ops->vidioc_queryctrl)
+ if (vfd->ctrl_handler)
+ ret = v4l2_queryctrl(vfd->ctrl_handler, p);
+ else if (ops->vidioc_queryctrl)
+ ret = ops->vidioc_queryctrl(file, fh, p);
+ else
break;
- ret = ops->vidioc_queryctrl(file, fh, p);
if (!ret)
dbgarg(cmd, "id=0x%x, type=%d, name=%s, min/max=%d/%d, "
"step=%d, default=%d, flags=0x%08x\n",
{
struct v4l2_control *p = arg;
- if (ops->vidioc_g_ctrl)
+ if (vfd->ctrl_handler)
+ ret = v4l2_g_ctrl(vfd->ctrl_handler, p);
+ else if (ops->vidioc_g_ctrl)
ret = ops->vidioc_g_ctrl(file, fh, p);
else if (ops->vidioc_g_ext_ctrls) {
struct v4l2_ext_controls ctrls;
struct v4l2_ext_controls ctrls;
struct v4l2_ext_control ctrl;
- if (!ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls)
+ if (!vfd->ctrl_handler &&
+ !ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls)
break;
dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
+ if (vfd->ctrl_handler) {
+ ret = v4l2_s_ctrl(vfd->ctrl_handler, p);
+ break;
+ }
if (ops->vidioc_s_ctrl) {
ret = ops->vidioc_s_ctrl(file, fh, p);
break;
struct v4l2_ext_controls *p = arg;
p->error_idx = p->count;
- if (!ops->vidioc_g_ext_ctrls)
- break;
- if (check_ext_ctrls(p, 0))
+ if (vfd->ctrl_handler)
+ ret = v4l2_g_ext_ctrls(vfd->ctrl_handler, p);
+ else if (ops->vidioc_g_ext_ctrls && check_ext_ctrls(p, 0))
ret = ops->vidioc_g_ext_ctrls(file, fh, p);
+ else
+ break;
v4l_print_ext_ctrls(cmd, vfd, p, !ret);
break;
}
struct v4l2_ext_controls *p = arg;
p->error_idx = p->count;
- if (!ops->vidioc_s_ext_ctrls)
+ if (!vfd->ctrl_handler && !ops->vidioc_s_ext_ctrls)
break;
v4l_print_ext_ctrls(cmd, vfd, p, 1);
- if (check_ext_ctrls(p, 0))
+ if (vfd->ctrl_handler)
+ ret = v4l2_s_ext_ctrls(vfd->ctrl_handler, p);
+ else if (check_ext_ctrls(p, 0))
ret = ops->vidioc_s_ext_ctrls(file, fh, p);
break;
}
struct v4l2_ext_controls *p = arg;
p->error_idx = p->count;
- if (!ops->vidioc_try_ext_ctrls)
+ if (!vfd->ctrl_handler && !ops->vidioc_try_ext_ctrls)
break;
v4l_print_ext_ctrls(cmd, vfd, p, 1);
- if (check_ext_ctrls(p, 0))
+ if (vfd->ctrl_handler)
+ ret = v4l2_try_ext_ctrls(vfd->ctrl_handler, p);
+ else if (check_ext_ctrls(p, 0))
ret = ops->vidioc_try_ext_ctrls(file, fh, p);
break;
}
{
struct v4l2_querymenu *p = arg;
- if (!ops->vidioc_querymenu)
+ if (vfd->ctrl_handler)
+ ret = v4l2_querymenu(vfd->ctrl_handler, p);
+ else if (ops->vidioc_querymenu)
+ ret = ops->vidioc_querymenu(file, fh, p);
+ else
break;
- ret = ops->vidioc_querymenu(file, fh, p);
if (!ret)
dbgarg(cmd, "id=0x%x, index=%d, name=%s\n",
p->id, p->index, p->name);
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
-#include <linux/i2c-id.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
+#include <media/v4l2-ctrls.h>
MODULE_DESCRIPTION("wm8739 driver");
MODULE_AUTHOR("T. Adachi, Hans Verkuil");
struct wm8739_state {
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+ struct {
+ /* audio cluster */
+ struct v4l2_ctrl *volume;
+ struct v4l2_ctrl *mute;
+ struct v4l2_ctrl *balance;
+ };
u32 clock_freq;
- u8 muted;
- u16 volume;
- u16 balance;
- u8 vol_l; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
- u8 vol_r; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
};
static inline struct wm8739_state *to_state(struct v4l2_subdev *sd)
return container_of(sd, struct wm8739_state, sd);
}
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct wm8739_state, hdl)->sd;
+}
+
/* ------------------------------------------------------------------------ */
static int wm8739_write(struct v4l2_subdev *sd, int reg, u16 val)
return -1;
}
-/* write regs to set audio volume etc */
-static void wm8739_set_audio(struct v4l2_subdev *sd)
-{
- struct wm8739_state *state = to_state(sd);
- u16 mute = state->muted ? 0x80 : 0;
-
- /* Volume setting: bits 0-4, 0x1f = 12 dB, 0x00 = -34.5 dB
- * Default setting: 0x17 = 0 dB
- */
- wm8739_write(sd, R0, (state->vol_l & 0x1f) | mute);
- wm8739_write(sd, R1, (state->vol_r & 0x1f) | mute);
-}
-
-static int wm8739_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct wm8739_state *state = to_state(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- ctrl->value = state->muted;
- break;
-
- case V4L2_CID_AUDIO_VOLUME:
- ctrl->value = state->volume;
- break;
-
- case V4L2_CID_AUDIO_BALANCE:
- ctrl->value = state->balance;
- break;
-
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int wm8739_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int wm8739_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct wm8739_state *state = to_state(sd);
unsigned int work_l, work_r;
+ u8 vol_l; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
+ u8 vol_r; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
+ u16 mute;
switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- state->muted = ctrl->value;
- break;
-
case V4L2_CID_AUDIO_VOLUME:
- state->volume = ctrl->value;
- break;
-
- case V4L2_CID_AUDIO_BALANCE:
- state->balance = ctrl->value;
break;
default:
}
/* normalize ( 65535 to 0 -> 31 to 0 (12dB to -34.5dB) ) */
- work_l = (min(65536 - state->balance, 32768) * state->volume) / 32768;
- work_r = (min(state->balance, (u16)32768) * state->volume) / 32768;
+ work_l = (min(65536 - state->balance->val, 32768) * state->volume->val) / 32768;
+ work_r = (min(state->balance->val, 32768) * state->volume->val) / 32768;
- state->vol_l = (long)work_l * 31 / 65535;
- state->vol_r = (long)work_r * 31 / 65535;
+ vol_l = (long)work_l * 31 / 65535;
+ vol_r = (long)work_r * 31 / 65535;
/* set audio volume etc. */
- wm8739_set_audio(sd);
+ mute = state->mute->val ? 0x80 : 0;
+
+ /* Volume setting: bits 0-4, 0x1f = 12 dB, 0x00 = -34.5 dB
+ * Default setting: 0x17 = 0 dB
+ */
+ wm8739_write(sd, R0, (vol_l & 0x1f) | mute);
+ wm8739_write(sd, R1, (vol_r & 0x1f) | mute);
return 0;
}
/* ------------------------------------------------------------------------ */
-static struct v4l2_queryctrl wm8739_qctrl[] = {
- {
- .id = V4L2_CID_AUDIO_VOLUME,
- .name = "Volume",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535/100,
- .default_value = 58880,
- .flags = 0,
- .type = V4L2_CTRL_TYPE_INTEGER,
- }, {
- .id = V4L2_CID_AUDIO_MUTE,
- .name = "Mute",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- .flags = 0,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- }, {
- .id = V4L2_CID_AUDIO_BALANCE,
- .name = "Balance",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535/100,
- .default_value = 32768,
- .flags = 0,
- .type = V4L2_CTRL_TYPE_INTEGER,
- }
-};
-
-/* ------------------------------------------------------------------------ */
-
static int wm8739_s_clock_freq(struct v4l2_subdev *sd, u32 audiofreq)
{
struct wm8739_state *state = to_state(sd);
return 0;
}
-static int wm8739_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(wm8739_qctrl); i++)
- if (qc->id && qc->id == wm8739_qctrl[i].id) {
- memcpy(qc, &wm8739_qctrl[i], sizeof(*qc));
- return 0;
- }
- return -EINVAL;
-}
-
static int wm8739_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct wm8739_state *state = to_state(sd);
v4l2_info(sd, "Frequency: %u Hz\n", state->clock_freq);
- v4l2_info(sd, "Volume L: %02x%s\n", state->vol_l & 0x1f,
- state->muted ? " (muted)" : "");
- v4l2_info(sd, "Volume R: %02x%s\n", state->vol_r & 0x1f,
- state->muted ? " (muted)" : "");
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
return 0;
}
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops wm8739_ctrl_ops = {
+ .s_ctrl = wm8739_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops wm8739_core_ops = {
.log_status = wm8739_log_status,
.g_chip_ident = wm8739_g_chip_ident,
- .queryctrl = wm8739_queryctrl,
- .g_ctrl = wm8739_g_ctrl,
- .s_ctrl = wm8739_s_ctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
};
static const struct v4l2_subdev_audio_ops wm8739_audio_ops = {
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
- state = kmalloc(sizeof(struct wm8739_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct wm8739_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &wm8739_ops);
- state->vol_l = 0x17; /* 0dB */
- state->vol_r = 0x17; /* 0dB */
- state->muted = 0;
- state->balance = 32768;
- /* normalize (12dB(31) to -34.5dB(0) [0dB(23)] -> 65535 to 0) */
- state->volume = ((long)state->vol_l + 1) * 65535 / 31;
+ v4l2_ctrl_handler_init(&state->hdl, 2);
+ state->volume = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
+ V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 50736);
+ state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ state->balance = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
+ V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
+ sd->ctrl_handler = &state->hdl;
+ if (state->hdl.error) {
+ int err = state->hdl.error;
+
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
+ return err;
+ }
+ v4l2_ctrl_cluster(3, &state->volume);
+
state->clock_freq = 48000;
/* Initialize wm8739 */
/* activate */
wm8739_write(sd, R9, 0x001);
/* set volume/mute */
- wm8739_set_audio(sd);
+ v4l2_ctrl_handler_setup(&state->hdl);
return 0;
}
static int wm8739_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct wm8739_state *state = to_state(sd);
v4l2_device_unregister_subdev(sd);
+ v4l2_ctrl_handler_free(&state->hdl);
kfree(to_state(sd));
return 0;
}
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-i2c-drv.h>
MODULE_DESCRIPTION("wm8775 driver");
struct wm8775_state {
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+ struct v4l2_ctrl *mute;
u8 input; /* Last selected input (0-0xf) */
- u8 muted;
};
static inline struct wm8775_state *to_state(struct v4l2_subdev *sd)
return container_of(sd, struct wm8775_state, sd);
}
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct wm8775_state, hdl)->sd;
+}
+
static int wm8775_write(struct v4l2_subdev *sd, int reg, u16 val)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
return -EINVAL;
}
state->input = input;
- if (state->muted)
+ if (!v4l2_ctrl_g_ctrl(state->mute))
return 0;
wm8775_write(sd, R21, 0x0c0);
wm8775_write(sd, R14, 0x1d4);
return 0;
}
-static int wm8775_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct wm8775_state *state = to_state(sd);
- if (ctrl->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- ctrl->value = state->muted;
- return 0;
-}
-
-static int wm8775_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct wm8775_state *state = to_state(sd);
-
- if (ctrl->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- state->muted = ctrl->value;
- wm8775_write(sd, R21, 0x0c0);
- wm8775_write(sd, R14, 0x1d4);
- wm8775_write(sd, R15, 0x1d4);
- if (!state->muted)
- wm8775_write(sd, R21, 0x100 + state->input);
- return 0;
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ wm8775_write(sd, R21, 0x0c0);
+ wm8775_write(sd, R14, 0x1d4);
+ wm8775_write(sd, R15, 0x1d4);
+ if (!ctrl->val)
+ wm8775_write(sd, R21, 0x100 + state->input);
+ return 0;
+ }
+ return -EINVAL;
}
static int wm8775_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
{
struct wm8775_state *state = to_state(sd);
- v4l2_info(sd, "Input: %d%s\n", state->input,
- state->muted ? " (muted)" : "");
+ v4l2_info(sd, "Input: %d\n", state->input);
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
return 0;
}
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops wm8775_ctrl_ops = {
+ .s_ctrl = wm8775_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops wm8775_core_ops = {
.log_status = wm8775_log_status,
.g_chip_ident = wm8775_g_chip_ident,
- .g_ctrl = wm8775_g_ctrl,
- .s_ctrl = wm8775_s_ctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
};
static const struct v4l2_subdev_tuner_ops wm8775_tuner_ops = {
v4l_info(client, "chip found @ 0x%02x (%s)\n",
client->addr << 1, client->adapter->name);
- state = kmalloc(sizeof(struct wm8775_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct wm8775_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &wm8775_ops);
state->input = 2;
- state->muted = 0;
+
+ v4l2_ctrl_handler_init(&state->hdl, 1);
+ state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ sd->ctrl_handler = &state->hdl;
+ if (state->hdl.error) {
+ int err = state->hdl.error;
+
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
+ return err;
+ }
/* Initialize wm8775 */
static int wm8775_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct wm8775_state *state = to_state(sd);
v4l2_device_unregister_subdev(sd);
- kfree(to_state(sd));
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
return 0;
}
#include <linux/kthread.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/memstick.h>
#define DRIVER_NAME "mspro_block"
struct mspro_block_data *msb = disk->private_data;
int rc = -ENXIO;
+ lock_kernel();
mutex_lock(&mspro_block_disk_lock);
if (msb && msb->card) {
}
mutex_unlock(&mspro_block_disk_lock);
+ unlock_kernel();
return rc;
}
static int mspro_block_bd_release(struct gendisk *disk, fmode_t mode)
{
- return mspro_block_disk_release(disk);
+ int ret;
+ lock_kernel();
+ ret = mspro_block_disk_release(disk);
+ unlock_kernel();
+ return ret;
}
static int mspro_block_bd_getgeo(struct block_device *bdev,
static int mspro_block_prepare_req(struct request_queue *q, struct request *req)
{
- if (!blk_fs_request(req) && !blk_pc_request(req)) {
+ if (req->cmd_type != REQ_TYPE_FS &&
+ req->cmd_type != REQ_TYPE_BLOCK_PC) {
blk_dump_rq_flags(req, "MSPro unsupported request");
return BLKPREP_KILL;
}
snprintf(s_attr->name, sizeof(s_attr->name),
"attr_x%02x", attr->entries[cnt].id);
+ sysfs_attr_init(&s_attr->dev_attr.attr);
s_attr->dev_attr.attr.name = s_attr->name;
s_attr->dev_attr.attr.mode = S_IRUGO;
s_attr->dev_attr.show = mspro_block_attr_show(s_attr->id);
struct mspro_block_data *msb = memstick_get_drvdata(card);
unsigned long flags;
- del_gendisk(msb->disk);
- dev_dbg(&card->dev, "mspro block remove\n");
spin_lock_irqsave(&msb->q_lock, flags);
msb->eject = 1;
blk_start_queue(msb->queue);
spin_unlock_irqrestore(&msb->q_lock, flags);
+ del_gendisk(msb->disk);
+ dev_dbg(&card->dev, "mspro block remove\n");
+
blk_cleanup_queue(msb->queue);
msb->queue = NULL;
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/pci.h>
int mpt_fwfault_debug;
EXPORT_SYMBOL(mpt_fwfault_debug);
-module_param_call(mpt_fwfault_debug, param_set_int, param_get_int,
- &mpt_fwfault_debug, 0600);
+module_param(mpt_fwfault_debug, int, 0600);
MODULE_PARM_DESC(mpt_fwfault_debug, "Enable detection of Firmware fault"
" and halt Firmware on fault - (default=0)");
static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
#ifdef CONFIG_PROC_FS
-static int procmpt_summary_read(char *buf, char **start, off_t offset,
- int request, int *eof, void *data);
-static int procmpt_version_read(char *buf, char **start, off_t offset,
- int request, int *eof, void *data);
-static int procmpt_iocinfo_read(char *buf, char **start, off_t offset,
- int request, int *eof, void *data);
+static const struct file_operations mpt_summary_proc_fops;
+static const struct file_operations mpt_version_proc_fops;
+static const struct file_operations mpt_iocinfo_proc_fops;
#endif
static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
* mpt_register - Register protocol-specific main callback handler.
* @cbfunc: callback function pointer
* @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
+ * @func_name: call function's name
*
* This routine is called by a protocol-specific driver (SCSI host,
* LAN, SCSI target) to register its reply callback routine. Each
u8 pcixcmd;
static int mpt_ids = 0;
#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *dent, *ent;
+ struct proc_dir_entry *dent;
#endif
ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
*/
dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
if (dent) {
- ent = create_proc_entry("info", S_IFREG|S_IRUGO, dent);
- if (ent) {
- ent->read_proc = procmpt_iocinfo_read;
- ent->data = ioc;
- }
- ent = create_proc_entry("summary", S_IFREG|S_IRUGO, dent);
- if (ent) {
- ent->read_proc = procmpt_summary_read;
- ent->data = ioc;
- }
+ proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc);
+ proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc);
}
#endif
static int
procmpt_create(void)
{
- struct proc_dir_entry *ent;
-
mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
if (mpt_proc_root_dir == NULL)
return -ENOTDIR;
- ent = create_proc_entry("summary", S_IFREG|S_IRUGO, mpt_proc_root_dir);
- if (ent)
- ent->read_proc = procmpt_summary_read;
-
- ent = create_proc_entry("version", S_IFREG|S_IRUGO, mpt_proc_root_dir);
- if (ent)
- ent->read_proc = procmpt_version_read;
-
+ proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops);
+ proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops);
return 0;
}
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * procmpt_summary_read - Handle read request of a summary file
- * @buf: Pointer to area to write information
- * @start: Pointer to start pointer
- * @offset: Offset to start writing
- * @request: Amount of read data requested
- * @eof: Pointer to EOF integer
- * @data: Pointer
- *
+/*
* Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
- * Returns number of characters written to process performing the read.
*/
-static int
-procmpt_summary_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
-{
- MPT_ADAPTER *ioc;
- char *out = buf;
- int len;
-
- if (data) {
- int more = 0;
+static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
- ioc = data;
- mpt_print_ioc_summary(ioc, out, &more, 0, 1);
+static int mpt_summary_proc_show(struct seq_file *m, void *v)
+{
+ MPT_ADAPTER *ioc = m->private;
- out += more;
+ if (ioc) {
+ seq_mpt_print_ioc_summary(ioc, m, 1);
} else {
list_for_each_entry(ioc, &ioc_list, list) {
- int more = 0;
-
- mpt_print_ioc_summary(ioc, out, &more, 0, 1);
-
- out += more;
- if ((out-buf) >= request)
- break;
+ seq_mpt_print_ioc_summary(ioc, m, 1);
}
}
- len = out - buf;
+ return 0;
+}
- MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
+static int mpt_summary_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mpt_summary_proc_show, PDE(inode)->data);
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * procmpt_version_read - Handle read request from /proc/mpt/version.
- * @buf: Pointer to area to write information
- * @start: Pointer to start pointer
- * @offset: Offset to start writing
- * @request: Amount of read data requested
- * @eof: Pointer to EOF integer
- * @data: Pointer
- *
- * Returns number of characters written to process performing the read.
- */
-static int
-procmpt_version_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
+static const struct file_operations mpt_summary_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mpt_summary_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int mpt_version_proc_show(struct seq_file *m, void *v)
{
u8 cb_idx;
int scsi, fc, sas, lan, ctl, targ, dmp;
char *drvname;
- int len;
- len = sprintf(buf, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
- len += sprintf(buf+len, " Fusion MPT base driver\n");
+ seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
+ seq_printf(m, " Fusion MPT base driver\n");
scsi = fc = sas = lan = ctl = targ = dmp = 0;
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
}
if (drvname)
- len += sprintf(buf+len, " Fusion MPT %s driver\n", drvname);
+ seq_printf(m, " Fusion MPT %s driver\n", drvname);
}
}
- MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
+ return 0;
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * procmpt_iocinfo_read - Handle read request from /proc/mpt/iocN/info.
- * @buf: Pointer to area to write information
- * @start: Pointer to start pointer
- * @offset: Offset to start writing
- * @request: Amount of read data requested
- * @eof: Pointer to EOF integer
- * @data: Pointer
- *
- * Returns number of characters written to process performing the read.
- */
-static int
-procmpt_iocinfo_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
+static int mpt_version_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mpt_version_proc_show, NULL);
+}
+
+static const struct file_operations mpt_version_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mpt_version_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
{
- MPT_ADAPTER *ioc = data;
- int len;
+ MPT_ADAPTER *ioc = m->private;
char expVer[32];
int sz;
int p;
mpt_get_fw_exp_ver(expVer, ioc);
- len = sprintf(buf, "%s:", ioc->name);
+ seq_printf(m, "%s:", ioc->name);
if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
- len += sprintf(buf+len, " (f/w download boot flag set)");
+ seq_printf(m, " (f/w download boot flag set)");
// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
-// len += sprintf(buf+len, " CONFIG_CHECKSUM_FAIL!");
+// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
- len += sprintf(buf+len, "\n ProductID = 0x%04x (%s)\n",
+ seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
ioc->facts.ProductID,
ioc->prod_name);
- len += sprintf(buf+len, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
+ seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
if (ioc->facts.FWImageSize)
- len += sprintf(buf+len, " (fw_size=%d)", ioc->facts.FWImageSize);
- len += sprintf(buf+len, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
- len += sprintf(buf+len, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
- len += sprintf(buf+len, " EventState = 0x%02x\n", ioc->facts.EventState);
+ seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
+ seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
+ seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
+ seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
- len += sprintf(buf+len, " CurrentHostMfaHighAddr = 0x%08x\n",
+ seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
ioc->facts.CurrentHostMfaHighAddr);
- len += sprintf(buf+len, " CurrentSenseBufferHighAddr = 0x%08x\n",
+ seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
ioc->facts.CurrentSenseBufferHighAddr);
- len += sprintf(buf+len, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
- len += sprintf(buf+len, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
+ seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
+ seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
- len += sprintf(buf+len, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
+ seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
(void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
/*
* Rounding UP to nearest 4-kB boundary here...
*/
sz = (ioc->req_sz * ioc->req_depth) + 128;
sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
- len += sprintf(buf+len, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
+ seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
- len += sprintf(buf+len, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
+ seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
4*ioc->facts.RequestFrameSize,
ioc->facts.GlobalCredits);
- len += sprintf(buf+len, " Frames @ 0x%p (Dma @ 0x%p)\n",
+ seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
(void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
sz = (ioc->reply_sz * ioc->reply_depth) + 128;
- len += sprintf(buf+len, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
+ seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
- len += sprintf(buf+len, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
+ seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
ioc->facts.CurReplyFrameSize,
ioc->facts.ReplyQueueDepth);
- len += sprintf(buf+len, " MaxDevices = %d\n",
+ seq_printf(m, " MaxDevices = %d\n",
(ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
- len += sprintf(buf+len, " MaxBuses = %d\n", ioc->facts.MaxBuses);
+ seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
/* per-port info */
for (p=0; p < ioc->facts.NumberOfPorts; p++) {
- len += sprintf(buf+len, " PortNumber = %d (of %d)\n",
+ seq_printf(m, " PortNumber = %d (of %d)\n",
p+1,
ioc->facts.NumberOfPorts);
if (ioc->bus_type == FC) {
if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
- len += sprintf(buf+len, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
+ seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
a[5], a[4], a[3], a[2], a[1], a[0]);
}
- len += sprintf(buf+len, " WWN = %08X%08X:%08X%08X\n",
+ seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
ioc->fc_port_page0[p].WWNN.High,
ioc->fc_port_page0[p].WWNN.Low,
ioc->fc_port_page0[p].WWPN.High,
}
}
- MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
+ return 0;
}
+static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mpt_iocinfo_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations mpt_iocinfo_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mpt_iocinfo_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
#endif /* CONFIG_PROC_FS } */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
*size = y;
}
+
+static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
+{
+ char expVer[32];
+
+ mpt_get_fw_exp_ver(expVer, ioc);
+
+ /*
+ * Shorter summary of attached ioc's...
+ */
+ seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
+ ioc->name,
+ ioc->prod_name,
+ MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
+ ioc->facts.FWVersion.Word,
+ expVer,
+ ioc->facts.NumberOfPorts,
+ ioc->req_depth);
+
+ if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
+ u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
+ seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
+ a[5], a[4], a[3], a[2], a[1], a[0]);
+ }
+
+ seq_printf(m, ", IRQ=%d", ioc->pci_irq);
+
+ if (!ioc->active)
+ seq_printf(m, " (disabled)");
+
+ seq_putc(m, '\n');
+}
+
/**
* mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
* @ioc: Pointer to MPT_ADAPTER structure
* mpt_SoftResetHandler - Issues a less expensive reset
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Indicates if sleep or schedule must be called.
-
*
* Returns 0 for SUCCESS or -1 if FAILED.
*
* mpt_Soft_Hard_ResetHandler - Try less expensive reset
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Indicates if sleep or schedule must be called.
-
*
* Returns 0 for SUCCESS or -1 if FAILED.
* Try for softreset first, only if it fails go for expensive
* mpt_sas_log_info - Log information returned from SAS IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @log_info: U32 LogInfo reply word from the IOC
+ * @cb_idx: callback function's handle
*
* Refer to lsi/mpi_log_sas.h.
**/
code_desc = ir_code_str[sas_loginfo.dw.code];
if (sas_loginfo.dw.subcode >=
ARRAY_SIZE(raid_sub_code_str))
- break;
+ break;
if (sas_loginfo.dw.code == 0)
sub_code_desc =
raid_sub_code_str[sas_loginfo.dw.subcode];
#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x40
#define MPT_TARGET_FLAGS_LED_ON 0x80
-/*
- * /proc/mpt interface
- */
-typedef struct {
- const char *name;
- mode_t mode;
- int pad;
- read_proc_t *read_proc;
- write_proc_t *write_proc;
-} mpt_proc_entry_t;
-
-#define MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len) \
-do { \
- len -= offset; \
- if (len < request) { \
- *eof = 1; \
- if (len <= 0) \
- return 0; \
- } else \
- len = request; \
- *start = buf + offset; \
- return len; \
-} while (0)
-
-
/*
* IOCTL structure and associated defines
*/
dev = &c->pdev->dev;
if (i2o_dma_realloc(dev, &c->dlct,
- le32_to_cpu(sb->expected_lct_size)))
+ le32_to_cpu(sb->expected_lct_size))) {
+ mutex_unlock(&c->lct_lock);
return -ENOMEM;
+ }
msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
- if (IS_ERR(msg))
+ if (IS_ERR(msg)) {
+ mutex_unlock(&c->lct_lock);
return PTR_ERR(msg);
+ }
msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6);
msg->u.head[1] = cpu_to_le32(I2O_CMD_LCT_NOTIFY << 24 | HOST_TID << 12 |
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2o.h>
+#include <linux/smp_lock.h>
#include <linux/mempool.h>
if (!dev->i2o_dev)
return -ENODEV;
+ lock_kernel();
if (dev->power > 0x1f)
i2o_block_device_power(dev, 0x02);
i2o_block_device_lock(dev->i2o_dev, -1);
osm_debug("Ready.\n");
+ unlock_kernel();
return 0;
};
if (!dev->i2o_dev)
return 0;
+ lock_kernel();
i2o_block_device_flush(dev->i2o_dev);
i2o_block_device_unlock(dev->i2o_dev, -1);
operation = 0x24;
i2o_block_device_power(dev, operation);
+ unlock_kernel();
return 0;
}
{
struct gendisk *disk = bdev->bd_disk;
struct i2o_block_device *dev = disk->private_data;
+ int ret = -ENOTTY;
/* Anyone capable of this syscall can do *real bad* things */
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ lock_kernel();
switch (cmd) {
case BLKI2OGRSTRAT:
- return put_user(dev->rcache, (int __user *)arg);
+ ret = put_user(dev->rcache, (int __user *)arg);
+ break;
case BLKI2OGWSTRAT:
- return put_user(dev->wcache, (int __user *)arg);
+ ret = put_user(dev->wcache, (int __user *)arg);
+ break;
case BLKI2OSRSTRAT:
+ ret = -EINVAL;
if (arg < 0 || arg > CACHE_SMARTFETCH)
- return -EINVAL;
+ break;
dev->rcache = arg;
+ ret = 0;
break;
case BLKI2OSWSTRAT:
+ ret = -EINVAL;
if (arg != 0
&& (arg < CACHE_WRITETHROUGH || arg > CACHE_SMARTBACK))
- return -EINVAL;
+ break;
dev->wcache = arg;
+ ret = 0;
break;
}
- return -ENOTTY;
+ unlock_kernel();
+
+ return ret;
};
/**
{
struct i2o_block_device *dev = req->rq_disk->private_data;
struct i2o_controller *c;
- u32 tid = dev->i2o_dev->lct_data.tid;
+ u32 tid;
struct i2o_message *msg;
u32 *mptr;
struct i2o_block_request *ireq = req->special;
goto exit;
}
+ tid = dev->i2o_dev->lct_data.tid;
c = dev->i2o_dev->iop;
msg = i2o_msg_get(c);
if (!req)
break;
- if (blk_fs_request(req)) {
+ if (req->cmd_type == REQ_TYPE_FS) {
struct i2o_block_delayed_request *dreq;
struct i2o_block_request *ireq = req->special;
unsigned int queue_depth;
.owner = THIS_MODULE,
.open = i2o_block_open,
.release = i2o_block_release,
- .locked_ioctl = i2o_block_ioctl,
+ .ioctl = i2o_block_ioctl,
+ .compat_ioctl = i2o_block_ioctl,
.getgeo = i2o_block_getgeo,
.media_changed = i2o_block_media_changed
};
len = 8 + ((hrt->entry_len * hrt->num_entries) << 2);
- /* We did a get user...so assuming mem is ok...is this bad? */
- put_user(len, kcmd.reslen);
- if (len > reslen)
+ if (put_user(len, kcmd.reslen))
+ ret = -EFAULT;
+ else if (len > reslen)
ret = -ENOBUFS;
- if (copy_to_user(kcmd.resbuf, (void *)hrt, len))
+ else if (copy_to_user(kcmd.resbuf, (void *)hrt, len))
ret = -EFAULT;
return ret;
lct = (i2o_lct *) c->lct;
len = (unsigned int)lct->table_size << 2;
- put_user(len, kcmd.reslen);
- if (len > reslen)
+ if (put_user(len, kcmd.reslen))
+ ret = -EFAULT;
+ else if (len > reslen)
ret = -ENOBUFS;
else if (copy_to_user(kcmd.resbuf, lct, len))
ret = -EFAULT;
return -EAGAIN;
}
- put_user(len, kcmd.reslen);
- if (len > reslen)
+ if (put_user(len, kcmd.reslen))
+ ret = -EFAULT;
+ else if (len > reslen)
ret = -ENOBUFS;
else if (copy_to_user(kcmd.resbuf, res, len))
ret = -EFAULT;
* Do the incoming paperwork
*/
i2o_dev = SCpnt->device->hostdata;
- c = i2o_dev->iop;
SCpnt->scsi_done = done;
done(SCpnt);
goto exit;
}
-
+ c = i2o_dev->iop;
tid = i2o_dev->lct_data.tid;
osm_debug("qcmd: Tid = %03x\n", tid);
}
static struct resource led_resources[] = {
- PM8606_LED_RESOURCE(PM8606_LED1_RED, RGB2B),
- PM8606_LED_RESOURCE(PM8606_LED1_GREEN, RGB2C),
- PM8606_LED_RESOURCE(PM8606_LED1_BLUE, RGB2D),
- PM8606_LED_RESOURCE(PM8606_LED2_RED, RGB1B),
- PM8606_LED_RESOURCE(PM8606_LED2_GREEN, RGB1C),
- PM8606_LED_RESOURCE(PM8606_LED2_BLUE, RGB1D),
+ PM8606_LED_RESOURCE(PM8606_LED1_RED, RGB1B),
+ PM8606_LED_RESOURCE(PM8606_LED1_GREEN, RGB1C),
+ PM8606_LED_RESOURCE(PM8606_LED1_BLUE, RGB1D),
+ PM8606_LED_RESOURCE(PM8606_LED2_RED, RGB2B),
+ PM8606_LED_RESOURCE(PM8606_LED2_GREEN, RGB2C),
+ PM8606_LED_RESOURCE(PM8606_LED2_BLUE, RGB2D),
};
#define PM8606_LED_DEVS(_i) \
{
struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \
: chip->companion;
- int use_gpadc = 0, data, ret;
+ int data;
+ int ret;
/* initialize GPADC without activating it */
- if (pdata && pdata->touch) {
- /* set GPADC MISC1 register */
- data = 0;
- data |= (pdata->touch->gpadc_prebias << 1)
- & PM8607_GPADC_PREBIAS_MASK;
- data |= (pdata->touch->slot_cycle << 3)
- & PM8607_GPADC_SLOT_CYCLE_MASK;
- data |= (pdata->touch->off_scale << 5)
- & PM8607_GPADC_OFF_SCALE_MASK;
- data |= (pdata->touch->sw_cal << 7)
- & PM8607_GPADC_SW_CAL_MASK;
- if (data) {
- ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data);
- if (ret < 0)
- goto out;
- }
- /* set tsi prebias time */
- if (pdata->touch->tsi_prebias) {
- data = pdata->touch->tsi_prebias;
- ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data);
- if (ret < 0)
- goto out;
- }
- /* set prebias & prechg time of pen detect */
- data = 0;
- data |= pdata->touch->pen_prebias & PM8607_PD_PREBIAS_MASK;
- data |= (pdata->touch->pen_prechg << 5)
- & PM8607_PD_PRECHG_MASK;
- if (data) {
- ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data);
- if (ret < 0)
- goto out;
- }
+ if (!pdata || !pdata->touch)
+ return -EINVAL;
- use_gpadc = 1;
+ /* set GPADC MISC1 register */
+ data = 0;
+ data |= (pdata->touch->gpadc_prebias << 1) & PM8607_GPADC_PREBIAS_MASK;
+ data |= (pdata->touch->slot_cycle << 3) & PM8607_GPADC_SLOT_CYCLE_MASK;
+ data |= (pdata->touch->off_scale << 5) & PM8607_GPADC_OFF_SCALE_MASK;
+ data |= (pdata->touch->sw_cal << 7) & PM8607_GPADC_SW_CAL_MASK;
+ if (data) {
+ ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data);
+ if (ret < 0)
+ goto out;
}
-
- /* turn on GPADC */
- if (use_gpadc) {
- ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1,
- PM8607_GPADC_EN, PM8607_GPADC_EN);
+ /* set tsi prebias time */
+ if (pdata->touch->tsi_prebias) {
+ data = pdata->touch->tsi_prebias;
+ ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data);
+ if (ret < 0)
+ goto out;
}
+ /* set prebias & prechg time of pen detect */
+ data = 0;
+ data |= pdata->touch->pen_prebias & PM8607_PD_PREBIAS_MASK;
+ data |= (pdata->touch->pen_prechg << 5) & PM8607_PD_PRECHG_MASK;
+ if (data) {
+ ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data);
+ if (ret < 0)
+ goto out;
+ }
+
+ ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1,
+ PM8607_GPADC_EN, PM8607_GPADC_EN);
out:
return ret;
}
depends on HAS_IOMEM
default y
help
- Configure MFD device drivers.
+ Multifunction devices embed several functions (e.g. GPIOs,
+ touchscreens, keyboards, current regulators, power management chips,
+ etc...) in one single integrated circuit. They usually talk to the
+ main CPU through one or more IRQ lines and low speed data busses (SPI,
+ I2C, etc..). They appear as one single device to the main system
+ through the data bus and the MFD framework allows for sub devices
+ (a.k.a. functions) to appear as discrete platform devices.
+ MFDs are typically found on embedded platforms.
+
+ This option alone does not add any kernel code.
if MFD_SUPPORT
select MFD_CORE
default n
+config TWL6030_PWM
+ tristate "TWL6030 PWM (Pulse Width Modulator) Support"
+ depends on TWL4030_CORE
+ select HAVE_PWM
+ default n
+ help
+ Say yes here if you want support for TWL6030 PWM.
+ This is used to control charging LED brightness.
+
+config MFD_STMPE
+ bool "Support STMicroelectronics STMPE"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ Support for the STMPE family of I/O Expanders from
+ STMicroelectronics.
+
+ Currently supported devices are:
+
+ STMPE811: GPIO, Touchscreen
+ STMPE1601: GPIO, Keypad
+ STMPE2401: GPIO, Keypad
+ STMPE2403: GPIO, Keypad
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device. Currently available sub drivers are:
+
+ GPIO: stmpe-gpio
+ Keypad: stmpe-keypad
+ Touchscreen: stmpe-ts
+
config MFD_TC35892
bool "Support Toshiba TC35892"
depends on I2C=y && GENERIC_HARDIRQS
accessing the device, additional drivers must be enabled in order
to use the functionality of the device.
+config MFD_MAX8998
+ bool "Maxim Semiconductor MAX8998 PMIC Support"
+ depends on I2C=y
+ select MFD_CORE
+ help
+ Say yes here to support for Maxim Semiconductor MAX8998. This is
+ a Power Management IC. This driver provies common support for
+ accessing the device, additional drivers must be enabled in order
+ to use the functionality of the device.
+
config MFD_WM8400
tristate "Support Wolfson Microelectronics WM8400"
select MFD_CORE
host many different types of MODULbus daughterboards, including
CAN and GPIO controllers.
+config MFD_JZ4740_ADC
+ tristate "Support for the JZ4740 SoC ADC core"
+ select MFD_CORE
+ depends on MACH_JZ4740
+ help
+ Say yes here if you want support for the ADC unit in the JZ4740 SoC.
+ This driver is necessary for jz4740-battery and jz4740-hwmon driver.
+
+config MFD_TPS6586X
+ tristate "TPS6586x Power Management chips"
+ depends on I2C && GPIOLIB
+ select MFD_CORE
+ help
+ If you say yes here you get support for the TPS6586X series of
+ Power Management chips.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps6586x.
+
endif # MFD_SUPPORT
menu "Multimedia Capabilities Port drivers"
obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
+obj-$(CONFIG_MFD_STMPE) += stmpe.o
obj-$(CONFIG_MFD_TC35892) += tc35892.o
obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o
+obj-$(CONFIG_TWL6030_PWM) += twl6030-pwm.o
obj-$(CONFIG_MFD_MC13783) += mc13783-core.o
obj-$(CONFIG_PMIC_DA903X) += da903x.o
max8925-objs := max8925-core.o max8925-i2c.o
obj-$(CONFIG_MFD_MAX8925) += max8925.o
+obj-$(CONFIG_MFD_MAX8998) += max8998.o
pcf50633-objs := pcf50633-core.o pcf50633-irq.o
obj-$(CONFIG_MFD_PCF50633) += pcf50633.o
obj-$(CONFIG_LPC_SCH) += lpc_sch.o
obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.o
obj-$(CONFIG_MFD_JANZ_CMODIO) += janz-cmodio.o
+obj-$(CONFIG_MFD_JZ4740_ADC) += jz4740-adc.o
+obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
err = ab3100_otp_read(otp);
if (err)
- return err;
+ goto err_otp_read;
dev_info(&pdev->dev, "AB3100 OTP readout registered\n");
err = device_create_file(&pdev->dev,
&ab3100_otp_attrs[i]);
if (err)
- goto out_no_sysfs;
+ goto err_create_file;
}
/* debugfs entries */
err = ab3100_otp_init_debugfs(&pdev->dev, otp);
if (err)
- goto out_no_debugfs;
+ goto err_init_debugfs;
return 0;
-out_no_sysfs:
- for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
- device_remove_file(&pdev->dev,
- &ab3100_otp_attrs[i]);
-out_no_debugfs:
+err_init_debugfs:
+err_create_file:
+ while (--i >= 0)
+ device_remove_file(&pdev->dev, &ab3100_otp_attrs[i]);
+err_otp_read:
kfree(otp);
return err;
}
}
/*
- * The exported register access functionality.
+ * The register access functionality.
*/
-int ab3550_get_chip_id(struct device *dev)
+static int ab3550_get_chip_id(struct device *dev)
{
struct ab3550 *ab = dev_get_drvdata(dev->parent);
return (int)ab->chip_id;
}
-int ab3550_mask_and_set_register_interruptible(struct device *dev, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues)
+static int ab3550_mask_and_set_register_interruptible(struct device *dev,
+ u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
{
struct ab3550 *ab;
struct platform_device *pdev = to_platform_device(dev);
bitmask, bitvalues);
}
-int ab3550_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
- u8 value)
+static int ab3550_set_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 value)
{
return ab3550_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
value);
}
-int ab3550_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
- u8 *value)
+static int ab3550_get_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 *value)
{
struct ab3550 *ab;
struct platform_device *pdev = to_platform_device(dev);
return get_register_interruptible(ab, bank, reg, value);
}
-int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
+static int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
u8 first_reg, u8 *regvals, u8 numregs)
{
struct ab3550 *ab;
numregs);
}
-int ab3550_event_registers_startup_state_get(struct device *dev, u8 *event)
+static int ab3550_event_registers_startup_state_get(struct device *dev,
+ u8 *event)
{
struct ab3550 *ab;
return 0;
}
-int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
+static int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
{
struct ab3550 *ab;
struct ab3550_platform_data *plf_data;
#include <linux/platform_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/ab8500.h>
+#include <linux/regulator/ab8500.h>
/*
* Interrupt register offsets
{ .name = "ab8500-audio", },
{ .name = "ab8500-usb", },
{ .name = "ab8500-pwm", },
+ { .name = "ab8500-regulator", },
};
int __devinit ab8500_init(struct ab8500 *ab8500)
goto out_removeirq;
}
- ret = mfd_add_devices(ab8500->dev, -1, ab8500_devs,
+ ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
ARRAY_SIZE(ab8500_devs), NULL,
ab8500->irq_base);
if (ret)
ret = spi_sync(spi, &msg);
if (!ret)
- ret = ab8500->rx_buf[0];
+ /*
+ * Only the 8 lowermost bytes are
+ * defined with value, the rest may
+ * vary depending on chip/board noise.
+ */
+ ret = ab8500->rx_buf[0] & 0xFFU;
return ret;
}
struct abx500_device_entry *dev_entry;
dev_entry = kzalloc(sizeof(struct abx500_device_entry), GFP_KERNEL);
- if (IS_ERR(dev_entry)) {
+ if (!dev_entry) {
dev_err(dev, "register_ops kzalloc failed");
return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (!res) {
dev_err(&pdev->dev, "no DMA resource\n");
- return -ENXIO;
+ ret = -ENXIO;
+ goto fail4;
}
davinci_vc->davinci_vcif.dma_tx_channel = res->start;
res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
if (!res) {
dev_err(&pdev->dev, "no DMA resource\n");
- return -ENXIO;
+ ret = -ENXIO;
+ goto fail4;
}
davinci_vc->davinci_vcif.dma_rx_channel = res->start;
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/mfd/core.h>
#include <linux/mfd/janz.h>
--- /dev/null
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * JZ4740 SoC ADC driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * This driver synchronizes access to the JZ4740 ADC core between the
+ * JZ4740 battery and hwmon drivers.
+ */
+
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <linux/clk.h>
+#include <linux/mfd/core.h>
+
+#include <linux/jz4740-adc.h>
+
+
+#define JZ_REG_ADC_ENABLE 0x00
+#define JZ_REG_ADC_CFG 0x04
+#define JZ_REG_ADC_CTRL 0x08
+#define JZ_REG_ADC_STATUS 0x0c
+
+#define JZ_REG_ADC_TOUCHSCREEN_BASE 0x10
+#define JZ_REG_ADC_BATTERY_BASE 0x1c
+#define JZ_REG_ADC_HWMON_BASE 0x20
+
+#define JZ_ADC_ENABLE_TOUCH BIT(2)
+#define JZ_ADC_ENABLE_BATTERY BIT(1)
+#define JZ_ADC_ENABLE_ADCIN BIT(0)
+
+enum {
+ JZ_ADC_IRQ_ADCIN = 0,
+ JZ_ADC_IRQ_BATTERY,
+ JZ_ADC_IRQ_TOUCH,
+ JZ_ADC_IRQ_PENUP,
+ JZ_ADC_IRQ_PENDOWN,
+};
+
+struct jz4740_adc {
+ struct resource *mem;
+ void __iomem *base;
+
+ int irq;
+ int irq_base;
+
+ struct clk *clk;
+ atomic_t clk_ref;
+
+ spinlock_t lock;
+};
+
+static inline void jz4740_adc_irq_set_masked(struct jz4740_adc *adc, int irq,
+ bool masked)
+{
+ unsigned long flags;
+ uint8_t val;
+
+ irq -= adc->irq_base;
+
+ spin_lock_irqsave(&adc->lock, flags);
+
+ val = readb(adc->base + JZ_REG_ADC_CTRL);
+ if (masked)
+ val |= BIT(irq);
+ else
+ val &= ~BIT(irq);
+ writeb(val, adc->base + JZ_REG_ADC_CTRL);
+
+ spin_unlock_irqrestore(&adc->lock, flags);
+}
+
+static void jz4740_adc_irq_mask(unsigned int irq)
+{
+ struct jz4740_adc *adc = get_irq_chip_data(irq);
+ jz4740_adc_irq_set_masked(adc, irq, true);
+}
+
+static void jz4740_adc_irq_unmask(unsigned int irq)
+{
+ struct jz4740_adc *adc = get_irq_chip_data(irq);
+ jz4740_adc_irq_set_masked(adc, irq, false);
+}
+
+static void jz4740_adc_irq_ack(unsigned int irq)
+{
+ struct jz4740_adc *adc = get_irq_chip_data(irq);
+
+ irq -= adc->irq_base;
+ writeb(BIT(irq), adc->base + JZ_REG_ADC_STATUS);
+}
+
+static struct irq_chip jz4740_adc_irq_chip = {
+ .name = "jz4740-adc",
+ .mask = jz4740_adc_irq_mask,
+ .unmask = jz4740_adc_irq_unmask,
+ .ack = jz4740_adc_irq_ack,
+};
+
+static void jz4740_adc_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+ struct jz4740_adc *adc = get_irq_desc_data(desc);
+ uint8_t status;
+ unsigned int i;
+
+ status = readb(adc->base + JZ_REG_ADC_STATUS);
+
+ for (i = 0; i < 5; ++i) {
+ if (status & BIT(i))
+ generic_handle_irq(adc->irq_base + i);
+ }
+}
+
+
+/* Refcounting for the ADC clock is done in here instead of in the clock
+ * framework, because it is the only clock which is shared between multiple
+ * devices and thus is the only clock which needs refcounting */
+static inline void jz4740_adc_clk_enable(struct jz4740_adc *adc)
+{
+ if (atomic_inc_return(&adc->clk_ref) == 1)
+ clk_enable(adc->clk);
+}
+
+static inline void jz4740_adc_clk_disable(struct jz4740_adc *adc)
+{
+ if (atomic_dec_return(&adc->clk_ref) == 0)
+ clk_disable(adc->clk);
+}
+
+static inline void jz4740_adc_set_enabled(struct jz4740_adc *adc, int engine,
+ bool enabled)
+{
+ unsigned long flags;
+ uint8_t val;
+
+ spin_lock_irqsave(&adc->lock, flags);
+
+ val = readb(adc->base + JZ_REG_ADC_ENABLE);
+ if (enabled)
+ val |= BIT(engine);
+ else
+ val &= BIT(engine);
+ writeb(val, adc->base + JZ_REG_ADC_ENABLE);
+
+ spin_unlock_irqrestore(&adc->lock, flags);
+}
+
+static int jz4740_adc_cell_enable(struct platform_device *pdev)
+{
+ struct jz4740_adc *adc = dev_get_drvdata(pdev->dev.parent);
+
+ jz4740_adc_clk_enable(adc);
+ jz4740_adc_set_enabled(adc, pdev->id, true);
+
+ return 0;
+}
+
+static int jz4740_adc_cell_disable(struct platform_device *pdev)
+{
+ struct jz4740_adc *adc = dev_get_drvdata(pdev->dev.parent);
+
+ jz4740_adc_set_enabled(adc, pdev->id, false);
+ jz4740_adc_clk_disable(adc);
+
+ return 0;
+}
+
+int jz4740_adc_set_config(struct device *dev, uint32_t mask, uint32_t val)
+{
+ struct jz4740_adc *adc = dev_get_drvdata(dev);
+ unsigned long flags;
+ uint32_t cfg;
+
+ if (!adc)
+ return -ENODEV;
+
+ spin_lock_irqsave(&adc->lock, flags);
+
+ cfg = readl(adc->base + JZ_REG_ADC_CFG);
+
+ cfg &= ~mask;
+ cfg |= val;
+
+ writel(cfg, adc->base + JZ_REG_ADC_CFG);
+
+ spin_unlock_irqrestore(&adc->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(jz4740_adc_set_config);
+
+static struct resource jz4740_hwmon_resources[] = {
+ {
+ .start = JZ_ADC_IRQ_ADCIN,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = JZ_REG_ADC_HWMON_BASE,
+ .end = JZ_REG_ADC_HWMON_BASE + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource jz4740_battery_resources[] = {
+ {
+ .start = JZ_ADC_IRQ_BATTERY,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = JZ_REG_ADC_BATTERY_BASE,
+ .end = JZ_REG_ADC_BATTERY_BASE + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+const struct mfd_cell jz4740_adc_cells[] = {
+ {
+ .id = 0,
+ .name = "jz4740-hwmon",
+ .num_resources = ARRAY_SIZE(jz4740_hwmon_resources),
+ .resources = jz4740_hwmon_resources,
+ .platform_data = (void *)&jz4740_adc_cells[0],
+ .data_size = sizeof(struct mfd_cell),
+
+ .enable = jz4740_adc_cell_enable,
+ .disable = jz4740_adc_cell_disable,
+ },
+ {
+ .id = 1,
+ .name = "jz4740-battery",
+ .num_resources = ARRAY_SIZE(jz4740_battery_resources),
+ .resources = jz4740_battery_resources,
+ .platform_data = (void *)&jz4740_adc_cells[1],
+ .data_size = sizeof(struct mfd_cell),
+
+ .enable = jz4740_adc_cell_enable,
+ .disable = jz4740_adc_cell_disable,
+ },
+};
+
+static int __devinit jz4740_adc_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct jz4740_adc *adc;
+ struct resource *mem_base;
+ int irq;
+
+ adc = kmalloc(sizeof(*adc), GFP_KERNEL);
+ if (!adc) {
+ dev_err(&pdev->dev, "Failed to allocate driver structure\n");
+ return -ENOMEM;
+ }
+
+ adc->irq = platform_get_irq(pdev, 0);
+ if (adc->irq < 0) {
+ ret = adc->irq;
+ dev_err(&pdev->dev, "Failed to get platform irq: %d\n", ret);
+ goto err_free;
+ }
+
+ adc->irq_base = platform_get_irq(pdev, 1);
+ if (adc->irq_base < 0) {
+ ret = adc->irq_base;
+ dev_err(&pdev->dev, "Failed to get irq base: %d\n", ret);
+ goto err_free;
+ }
+
+ mem_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem_base) {
+ ret = -ENOENT;
+ dev_err(&pdev->dev, "Failed to get platform mmio resource\n");
+ goto err_free;
+ }
+
+ /* Only request the shared registers for the MFD driver */
+ adc->mem = request_mem_region(mem_base->start, JZ_REG_ADC_STATUS,
+ pdev->name);
+ if (!adc->mem) {
+ ret = -EBUSY;
+ dev_err(&pdev->dev, "Failed to request mmio memory region\n");
+ goto err_free;
+ }
+
+ adc->base = ioremap_nocache(adc->mem->start, resource_size(adc->mem));
+ if (!adc->base) {
+ ret = -EBUSY;
+ dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
+ goto err_release_mem_region;
+ }
+
+ adc->clk = clk_get(&pdev->dev, "adc");
+ if (IS_ERR(adc->clk)) {
+ ret = PTR_ERR(adc->clk);
+ dev_err(&pdev->dev, "Failed to get clock: %d\n", ret);
+ goto err_iounmap;
+ }
+
+ spin_lock_init(&adc->lock);
+ atomic_set(&adc->clk_ref, 0);
+
+ platform_set_drvdata(pdev, adc);
+
+ for (irq = adc->irq_base; irq < adc->irq_base + 5; ++irq) {
+ set_irq_chip_data(irq, adc);
+ set_irq_chip_and_handler(irq, &jz4740_adc_irq_chip,
+ handle_level_irq);
+ }
+
+ set_irq_data(adc->irq, adc);
+ set_irq_chained_handler(adc->irq, jz4740_adc_irq_demux);
+
+ writeb(0x00, adc->base + JZ_REG_ADC_ENABLE);
+ writeb(0xff, adc->base + JZ_REG_ADC_CTRL);
+
+ ret = mfd_add_devices(&pdev->dev, 0, jz4740_adc_cells,
+ ARRAY_SIZE(jz4740_adc_cells), mem_base, adc->irq_base);
+ if (ret < 0)
+ goto err_clk_put;
+
+ return 0;
+
+err_clk_put:
+ clk_put(adc->clk);
+err_iounmap:
+ platform_set_drvdata(pdev, NULL);
+ iounmap(adc->base);
+err_release_mem_region:
+ release_mem_region(adc->mem->start, resource_size(adc->mem));
+err_free:
+ kfree(adc);
+
+ return ret;
+}
+
+static int __devexit jz4740_adc_remove(struct platform_device *pdev)
+{
+ struct jz4740_adc *adc = platform_get_drvdata(pdev);
+
+ mfd_remove_devices(&pdev->dev);
+
+ set_irq_data(adc->irq, NULL);
+ set_irq_chained_handler(adc->irq, NULL);
+
+ iounmap(adc->base);
+ release_mem_region(adc->mem->start, resource_size(adc->mem));
+
+ clk_put(adc->clk);
+
+ platform_set_drvdata(pdev, NULL);
+
+ kfree(adc);
+
+ return 0;
+}
+
+struct platform_driver jz4740_adc_driver = {
+ .probe = jz4740_adc_probe,
+ .remove = __devexit_p(jz4740_adc_remove),
+ .driver = {
+ .name = "jz4740-adc",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init jz4740_adc_init(void)
+{
+ return platform_driver_register(&jz4740_adc_driver);
+}
+module_init(jz4740_adc_init);
+
+static void __exit jz4740_adc_exit(void)
+{
+ platform_driver_unregister(&jz4740_adc_driver);
+}
+module_exit(jz4740_adc_exit);
+
+MODULE_DESCRIPTION("JZ4740 SoC ADC driver");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:jz4740-adc");
},
};
+static struct resource onkey_resources[] = {
+ {
+ .name = "max8925-onkey",
+ .start = MAX8925_IRQ_GPM_SW_3SEC,
+ .end = MAX8925_IRQ_GPM_SW_3SEC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell onkey_devs[] = {
+ {
+ .name = "max8925-onkey",
+ .num_resources = 1,
+ .resources = &onkey_resources[0],
+ .id = -1,
+ },
+};
+
#define MAX8925_REG_RESOURCE(_start, _end) \
{ \
.start = MAX8925_##_start, \
dev_err(chip->dev, "Failed to add rtc subdev\n");
goto out;
}
+
+ ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
+ ARRAY_SIZE(onkey_devs),
+ &onkey_resources[0], 0);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to add onkey subdev\n");
+ goto out_dev;
+ }
+
if (pdata && pdata->regulator[0]) {
ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[0],
ARRAY_SIZE(regulator_devs),
--- /dev/null
+/*
+ * max8698.c - mfd core driver for the Maxim 8998
+ *
+ * Copyright (C) 2009-2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max8998.h>
+#include <linux/mfd/max8998-private.h>
+
+static struct mfd_cell max8998_devs[] = {
+ {
+ .name = "max8998-pmic",
+ }
+};
+
+static int max8998_i2c_device_read(struct max8998_dev *max8998, u8 reg, u8 *dest)
+{
+ struct i2c_client *client = max8998->i2c_client;
+ int ret;
+
+ mutex_lock(&max8998->iolock);
+ ret = i2c_smbus_read_byte_data(client, reg);
+ mutex_unlock(&max8998->iolock);
+ if (ret < 0)
+ return ret;
+
+ ret &= 0xff;
+ *dest = ret;
+ return 0;
+}
+
+static int max8998_i2c_device_write(struct max8998_dev *max8998, u8 reg, u8 value)
+{
+ struct i2c_client *client = max8998->i2c_client;
+ int ret;
+
+ mutex_lock(&max8998->iolock);
+ ret = i2c_smbus_write_byte_data(client, reg, value);
+ mutex_unlock(&max8998->iolock);
+ return ret;
+}
+
+static int max8998_i2c_device_update(struct max8998_dev *max8998, u8 reg,
+ u8 val, u8 mask)
+{
+ struct i2c_client *client = max8998->i2c_client;
+ int ret;
+
+ mutex_lock(&max8998->iolock);
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret >= 0) {
+ u8 old_val = ret & 0xff;
+ u8 new_val = (val & mask) | (old_val & (~mask));
+ ret = i2c_smbus_write_byte_data(client, reg, new_val);
+ if (ret >= 0)
+ ret = 0;
+ }
+ mutex_unlock(&max8998->iolock);
+ return ret;
+}
+
+static int max8998_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct max8998_dev *max8998;
+ int ret = 0;
+
+ max8998 = kzalloc(sizeof(struct max8998_dev), GFP_KERNEL);
+ if (max8998 == NULL)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, max8998);
+ max8998->dev = &i2c->dev;
+ max8998->i2c_client = i2c;
+ max8998->dev_read = max8998_i2c_device_read;
+ max8998->dev_write = max8998_i2c_device_write;
+ max8998->dev_update = max8998_i2c_device_update;
+ mutex_init(&max8998->iolock);
+
+ ret = mfd_add_devices(max8998->dev, -1,
+ max8998_devs, ARRAY_SIZE(max8998_devs),
+ NULL, 0);
+ if (ret < 0)
+ goto err;
+
+ return ret;
+
+err:
+ mfd_remove_devices(max8998->dev);
+ kfree(max8998);
+ return ret;
+}
+
+static int max8998_i2c_remove(struct i2c_client *i2c)
+{
+ struct max8998_dev *max8998 = i2c_get_clientdata(i2c);
+
+ mfd_remove_devices(max8998->dev);
+ kfree(max8998);
+
+ return 0;
+}
+
+static const struct i2c_device_id max8998_i2c_id[] = {
+ { "max8998", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max8998_i2c_id);
+
+static struct i2c_driver max8998_i2c_driver = {
+ .driver = {
+ .name = "max8998",
+ .owner = THIS_MODULE,
+ },
+ .probe = max8998_i2c_probe,
+ .remove = max8998_i2c_remove,
+ .id_table = max8998_i2c_id,
+};
+
+static int __init max8998_i2c_init(void)
+{
+ return i2c_add_driver(&max8998_i2c_driver);
+}
+/* init early so consumer devices can complete system boot */
+subsys_initcall(max8998_i2c_init);
+
+static void __exit max8998_i2c_exit(void)
+{
+ i2c_del_driver(&max8998_i2c_driver);
+}
+module_exit(max8998_i2c_exit);
+
+MODULE_DESCRIPTION("MAXIM 8998 multi-function core driver");
+MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
+MODULE_LICENSE("GPL");
*/
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
#include <linux/spi/spi.h>
#include <linux/mfd/core.h>
-#include <linux/mfd/mc13783-private.h>
+#include <linux/mfd/mc13783.h>
+
+struct mc13783 {
+ struct spi_device *spidev;
+ struct mutex lock;
+ int irq;
+ int flags;
+
+ irq_handler_t irqhandler[MC13783_NUM_IRQ];
+ void *irqdata[MC13783_NUM_IRQ];
+
+ /* XXX these should go as platformdata to the regulator subdevice */
+ struct mc13783_regulator_init_data *regulators;
+ int num_regulators;
+};
+
+#define MC13783_REG_REVISION 7
+#define MC13783_REG_ADC_0 43
+#define MC13783_REG_ADC_1 44
+#define MC13783_REG_ADC_2 45
#define MC13783_IRQSTAT0 0
#define MC13783_IRQSTAT0_ADCDONEI (1 << 0)
}
EXPORT_SYMBOL(mc13783_reg_rmw);
+int mc13783_get_flags(struct mc13783 *mc13783)
+{
+ return mc13783->flags;
+}
+EXPORT_SYMBOL(mc13783_get_flags);
+
int mc13783_irq_mask(struct mc13783 *mc13783, int irq)
{
int ret;
#define MENELAUS_RESERVED14_IRQ 14 /* Reserved */
#define MENELAUS_RESERVED15_IRQ 15 /* Reserved */
+/* VCORE_CTRL1 register */
+#define VCORE_CTRL1_BYP_COMP (1 << 5)
+#define VCORE_CTRL1_HW_NSW (1 << 7)
+
+/* GPIO_CTRL register */
+#define GPIO_CTRL_SLOTSELEN (1 << 5)
+#define GPIO_CTRL_SLPCTLEN (1 << 6)
+#define GPIO1_DIR_INPUT (1 << 0)
+#define GPIO2_DIR_INPUT (1 << 1)
+#define GPIO3_DIR_INPUT (1 << 2)
+
+/* MCT_CTRL1 register */
+#define MCT_CTRL1_S1_CMD_OD (1 << 2)
+#define MCT_CTRL1_S2_CMD_OD (1 << 3)
+
+/* MCT_CTRL2 register */
+#define MCT_CTRL2_VS2_SEL_D0 (1 << 0)
+#define MCT_CTRL2_VS2_SEL_D1 (1 << 1)
+#define MCT_CTRL2_S1CD_BUFEN (1 << 4)
+#define MCT_CTRL2_S2CD_BUFEN (1 << 5)
+#define MCT_CTRL2_S1CD_DBEN (1 << 6)
+#define MCT_CTRL2_S2CD_BEN (1 << 7)
+
+/* MCT_CTRL3 register */
+#define MCT_CTRL3_SLOT1_EN (1 << 0)
+#define MCT_CTRL3_SLOT2_EN (1 << 1)
+#define MCT_CTRL3_S1_AUTO_EN (1 << 2)
+#define MCT_CTRL3_S2_AUTO_EN (1 << 3)
+
+/* MCT_PIN_ST register */
+#define MCT_PIN_ST_S1_CD_ST (1 << 0)
+#define MCT_PIN_ST_S2_CD_ST (1 << 1)
+
static void menelaus_work(struct work_struct *_menelaus);
struct menelaus_chip {
return;
if (!(reg & 0x1))
- card_mask |= (1 << 0);
+ card_mask |= MCT_PIN_ST_S1_CD_ST;
if (!(reg & 0x2))
- card_mask |= (1 << 1);
+ card_mask |= MCT_PIN_ST_S2_CD_ST;
if (menelaus_hw->mmc_callback)
menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data,
val = ret;
if (slot == 1) {
if (enable)
- val |= 1 << 2;
+ val |= MCT_CTRL1_S1_CMD_OD;
else
- val &= ~(1 << 2);
+ val &= ~MCT_CTRL1_S1_CMD_OD;
} else {
if (enable)
- val |= 1 << 3;
+ val |= MCT_CTRL1_S2_CMD_OD;
else
- val &= ~(1 << 3);
+ val &= ~MCT_CTRL1_S2_CMD_OD;
}
ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val);
mutex_unlock(&the_menelaus->lock);
ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
if (ret < 0)
goto out;
- ret |= 0x02;
+ ret |= GPIO2_DIR_INPUT;
if (enable)
- ret |= 1 << 5;
+ ret |= GPIO_CTRL_SLOTSELEN;
else
- ret &= ~(1 << 5);
+ ret &= ~GPIO_CTRL_SLOTSELEN;
ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
out:
mutex_unlock(&the_menelaus->lock);
val = ret;
if (slot == 1) {
if (cd_en)
- val |= (1 << 4) | (1 << 6);
+ val |= MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN;
else
- val &= ~((1 << 4) | (1 << 6));
+ val &= ~(MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN);
} else {
if (cd_en)
- val |= (1 << 5) | (1 << 7);
+ val |= MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN;
else
- val &= ~((1 << 5) | (1 << 7));
+ val &= ~(MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN);
}
ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val);
if (ret < 0)
val = ret;
if (slot == 1) {
if (enable)
- val |= 1 << 0;
+ val |= MCT_CTRL3_SLOT1_EN;
else
- val &= ~(1 << 0);
+ val &= ~MCT_CTRL3_SLOT1_EN;
} else {
int b;
if (enable)
- ret |= 1 << 1;
+ val |= MCT_CTRL3_SLOT2_EN;
else
- ret &= ~(1 << 1);
+ val &= ~MCT_CTRL3_SLOT2_EN;
b = menelaus_read_reg(MENELAUS_MCT_CTRL2);
- b &= ~0x03;
+ b &= ~(MCT_CTRL2_VS2_SEL_D0 | MCT_CTRL2_VS2_SEL_D1);
b |= power;
ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b);
if (ret < 0)
goto out;
}
/* Disable autonomous shutdown */
- val &= ~(0x03 << 2);
+ val &= ~(MCT_CTRL3_S1_AUTO_EN | MCT_CTRL3_S2_AUTO_EN);
ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val);
out:
mutex_unlock(&the_menelaus->lock);
if (!the_menelaus->vcore_hw_mode) {
val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
/* HW mode, turn OFF byte comparator */
- val |= ((1 << 7) | (1 << 5));
+ val |= (VCORE_CTRL1_HW_NSW | VCORE_CTRL1_BYP_COMP);
ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
the_menelaus->vcore_hw_mode = 1;
}
ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
if (ret < 0)
goto out;
- t = ((1 << 6) | 0x04);
+ t = (GPIO_CTRL_SLPCTLEN | GPIO3_DIR_INPUT);
if (enable)
ret |= t;
else
goto fail_res;
}
- platform_device_add_resources(pdev, res, cell->num_resources);
+ ret = platform_device_add_resources(pdev, res, cell->num_resources);
+ if (ret)
+ goto fail_res;
ret = platform_device_add(pdev);
if (ret)
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/stmpe.h>
+#include "stmpe.h"
+
+static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
+{
+ return stmpe->variant->enable(stmpe, blocks, true);
+}
+
+static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
+{
+ return stmpe->variant->enable(stmpe, blocks, false);
+}
+
+static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(stmpe->i2c, reg);
+ if (ret < 0)
+ dev_err(stmpe->dev, "failed to read reg %#x: %d\n",
+ reg, ret);
+
+ dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
+
+ return ret;
+}
+
+static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
+{
+ int ret;
+
+ dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
+
+ ret = i2c_smbus_write_byte_data(stmpe->i2c, reg, val);
+ if (ret < 0)
+ dev_err(stmpe->dev, "failed to write reg %#x: %d\n",
+ reg, ret);
+
+ return ret;
+}
+
+static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
+{
+ int ret;
+
+ ret = __stmpe_reg_read(stmpe, reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~mask;
+ ret |= val;
+
+ return __stmpe_reg_write(stmpe, reg, ret);
+}
+
+static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
+ u8 *values)
+{
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(stmpe->i2c, reg, length, values);
+ if (ret < 0)
+ dev_err(stmpe->dev, "failed to read regs %#x: %d\n",
+ reg, ret);
+
+ dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
+ stmpe_dump_bytes("stmpe rd: ", values, length);
+
+ return ret;
+}
+
+static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
+ const u8 *values)
+{
+ int ret;
+
+ dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
+ stmpe_dump_bytes("stmpe wr: ", values, length);
+
+ ret = i2c_smbus_write_i2c_block_data(stmpe->i2c, reg, length,
+ values);
+ if (ret < 0)
+ dev_err(stmpe->dev, "failed to write regs %#x: %d\n",
+ reg, ret);
+
+ return ret;
+}
+
+/**
+ * stmpe_enable - enable blocks on an STMPE device
+ * @stmpe: Device to work on
+ * @blocks: Mask of blocks (enum stmpe_block values) to enable
+ */
+int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
+{
+ int ret;
+
+ mutex_lock(&stmpe->lock);
+ ret = __stmpe_enable(stmpe, blocks);
+ mutex_unlock(&stmpe->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_enable);
+
+/**
+ * stmpe_disable - disable blocks on an STMPE device
+ * @stmpe: Device to work on
+ * @blocks: Mask of blocks (enum stmpe_block values) to enable
+ */
+int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
+{
+ int ret;
+
+ mutex_lock(&stmpe->lock);
+ ret = __stmpe_disable(stmpe, blocks);
+ mutex_unlock(&stmpe->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_disable);
+
+/**
+ * stmpe_reg_read() - read a single STMPE register
+ * @stmpe: Device to read from
+ * @reg: Register to read
+ */
+int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
+{
+ int ret;
+
+ mutex_lock(&stmpe->lock);
+ ret = __stmpe_reg_read(stmpe, reg);
+ mutex_unlock(&stmpe->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_reg_read);
+
+/**
+ * stmpe_reg_write() - write a single STMPE register
+ * @stmpe: Device to write to
+ * @reg: Register to write
+ * @val: Value to write
+ */
+int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
+{
+ int ret;
+
+ mutex_lock(&stmpe->lock);
+ ret = __stmpe_reg_write(stmpe, reg, val);
+ mutex_unlock(&stmpe->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_reg_write);
+
+/**
+ * stmpe_set_bits() - set the value of a bitfield in a STMPE register
+ * @stmpe: Device to write to
+ * @reg: Register to write
+ * @mask: Mask of bits to set
+ * @val: Value to set
+ */
+int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
+{
+ int ret;
+
+ mutex_lock(&stmpe->lock);
+ ret = __stmpe_set_bits(stmpe, reg, mask, val);
+ mutex_unlock(&stmpe->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_set_bits);
+
+/**
+ * stmpe_block_read() - read multiple STMPE registers
+ * @stmpe: Device to read from
+ * @reg: First register
+ * @length: Number of registers
+ * @values: Buffer to write to
+ */
+int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
+{
+ int ret;
+
+ mutex_lock(&stmpe->lock);
+ ret = __stmpe_block_read(stmpe, reg, length, values);
+ mutex_unlock(&stmpe->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_block_read);
+
+/**
+ * stmpe_block_write() - write multiple STMPE registers
+ * @stmpe: Device to write to
+ * @reg: First register
+ * @length: Number of registers
+ * @values: Values to write
+ */
+int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
+ const u8 *values)
+{
+ int ret;
+
+ mutex_lock(&stmpe->lock);
+ ret = __stmpe_block_write(stmpe, reg, length, values);
+ mutex_unlock(&stmpe->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_block_write);
+
+/**
+ * stmpe_set_altfunc: set the alternate function for STMPE pins
+ * @stmpe: Device to configure
+ * @pins: Bitmask of pins to affect
+ * @block: block to enable alternate functions for
+ *
+ * @pins is assumed to have a bit set for each of the bits whose alternate
+ * function is to be changed, numbered according to the GPIOXY numbers.
+ *
+ * If the GPIO module is not enabled, this function automatically enables it in
+ * order to perform the change.
+ */
+int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
+{
+ struct stmpe_variant_info *variant = stmpe->variant;
+ u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
+ int af_bits = variant->af_bits;
+ int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
+ int afperreg = 8 / af_bits;
+ int mask = (1 << af_bits) - 1;
+ u8 regs[numregs];
+ int af;
+ int ret;
+
+ mutex_lock(&stmpe->lock);
+
+ ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
+ if (ret < 0)
+ goto out;
+
+ ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
+ if (ret < 0)
+ goto out;
+
+ af = variant->get_altfunc(stmpe, block);
+
+ while (pins) {
+ int pin = __ffs(pins);
+ int regoffset = numregs - (pin / afperreg) - 1;
+ int pos = (pin % afperreg) * (8 / afperreg);
+
+ regs[regoffset] &= ~(mask << pos);
+ regs[regoffset] |= af << pos;
+
+ pins &= ~(1 << pin);
+ }
+
+ ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
+
+out:
+ mutex_unlock(&stmpe->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
+
+/*
+ * GPIO (all variants)
+ */
+
+static struct resource stmpe_gpio_resources[] = {
+ /* Start and end filled dynamically */
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell stmpe_gpio_cell = {
+ .name = "stmpe-gpio",
+ .resources = stmpe_gpio_resources,
+ .num_resources = ARRAY_SIZE(stmpe_gpio_resources),
+};
+
+/*
+ * Keypad (1601, 2401, 2403)
+ */
+
+static struct resource stmpe_keypad_resources[] = {
+ {
+ .name = "KEYPAD",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "KEYPAD_OVER",
+ .start = 1,
+ .end = 1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell stmpe_keypad_cell = {
+ .name = "stmpe-keypad",
+ .resources = stmpe_keypad_resources,
+ .num_resources = ARRAY_SIZE(stmpe_keypad_resources),
+};
+
+/*
+ * Touchscreen (STMPE811)
+ */
+
+static struct resource stmpe_ts_resources[] = {
+ {
+ .name = "TOUCH_DET",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "FIFO_TH",
+ .start = 1,
+ .end = 1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell stmpe_ts_cell = {
+ .name = "stmpe-ts",
+ .resources = stmpe_ts_resources,
+ .num_resources = ARRAY_SIZE(stmpe_ts_resources),
+};
+
+/*
+ * STMPE811
+ */
+
+static const u8 stmpe811_regs[] = {
+ [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID,
+ [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL,
+ [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN,
+ [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA,
+ [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA,
+ [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN,
+ [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN,
+ [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR,
+ [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE,
+ [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE,
+ [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF,
+ [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN,
+ [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA,
+ [STMPE_IDX_GPEDR_MSB] = STMPE811_REG_GPIO_ED,
+};
+
+static struct stmpe_variant_block stmpe811_blocks[] = {
+ {
+ .cell = &stmpe_gpio_cell,
+ .irq = STMPE811_IRQ_GPIOC,
+ .block = STMPE_BLOCK_GPIO,
+ },
+ {
+ .cell = &stmpe_ts_cell,
+ .irq = STMPE811_IRQ_TOUCH_DET,
+ .block = STMPE_BLOCK_TOUCHSCREEN,
+ },
+};
+
+static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
+ bool enable)
+{
+ unsigned int mask = 0;
+
+ if (blocks & STMPE_BLOCK_GPIO)
+ mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
+
+ if (blocks & STMPE_BLOCK_ADC)
+ mask |= STMPE811_SYS_CTRL2_ADC_OFF;
+
+ if (blocks & STMPE_BLOCK_TOUCHSCREEN)
+ mask |= STMPE811_SYS_CTRL2_TSC_OFF;
+
+ return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask,
+ enable ? 0 : mask);
+}
+
+static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
+{
+ /* 0 for touchscreen, 1 for GPIO */
+ return block != STMPE_BLOCK_TOUCHSCREEN;
+}
+
+static struct stmpe_variant_info stmpe811 = {
+ .name = "stmpe811",
+ .id_val = 0x0811,
+ .id_mask = 0xffff,
+ .num_gpios = 8,
+ .af_bits = 1,
+ .regs = stmpe811_regs,
+ .blocks = stmpe811_blocks,
+ .num_blocks = ARRAY_SIZE(stmpe811_blocks),
+ .num_irqs = STMPE811_NR_INTERNAL_IRQS,
+ .enable = stmpe811_enable,
+ .get_altfunc = stmpe811_get_altfunc,
+};
+
+/*
+ * STMPE1601
+ */
+
+static const u8 stmpe1601_regs[] = {
+ [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID,
+ [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB,
+ [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB,
+ [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB,
+ [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB,
+ [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB,
+ [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB,
+ [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
+ [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
+ [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
+ [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
+ [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
+ [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
+ [STMPE_IDX_GPEDR_MSB] = STMPE1601_REG_GPIO_ED_MSB,
+};
+
+static struct stmpe_variant_block stmpe1601_blocks[] = {
+ {
+ .cell = &stmpe_gpio_cell,
+ .irq = STMPE24XX_IRQ_GPIOC,
+ .block = STMPE_BLOCK_GPIO,
+ },
+ {
+ .cell = &stmpe_keypad_cell,
+ .irq = STMPE24XX_IRQ_KEYPAD,
+ .block = STMPE_BLOCK_KEYPAD,
+ },
+};
+
+/* supported autosleep timeout delay (in msecs) */
+static const int stmpe_autosleep_delay[] = {
+ 4, 16, 32, 64, 128, 256, 512, 1024,
+};
+
+static int stmpe_round_timeout(int timeout)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
+ if (stmpe_autosleep_delay[i] >= timeout)
+ return i;
+ }
+
+ /*
+ * requests for delays longer than supported should not return the
+ * longest supported delay
+ */
+ return -EINVAL;
+}
+
+static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
+{
+ int ret;
+
+ if (!stmpe->variant->enable_autosleep)
+ return -ENOSYS;
+
+ mutex_lock(&stmpe->lock);
+ ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
+ mutex_unlock(&stmpe->lock);
+
+ return ret;
+}
+
+/*
+ * Both stmpe 1601/2403 support same layout for autosleep
+ */
+static int stmpe1601_autosleep(struct stmpe *stmpe,
+ int autosleep_timeout)
+{
+ int ret, timeout;
+
+ /* choose the best available timeout */
+ timeout = stmpe_round_timeout(autosleep_timeout);
+ if (timeout < 0) {
+ dev_err(stmpe->dev, "invalid timeout\n");
+ return timeout;
+ }
+
+ ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
+ STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
+ timeout);
+ if (ret < 0)
+ return ret;
+
+ return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
+ STPME1601_AUTOSLEEP_ENABLE,
+ STPME1601_AUTOSLEEP_ENABLE);
+}
+
+static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
+ bool enable)
+{
+ unsigned int mask = 0;
+
+ if (blocks & STMPE_BLOCK_GPIO)
+ mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
+
+ if (blocks & STMPE_BLOCK_KEYPAD)
+ mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
+
+ return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
+ enable ? mask : 0);
+}
+
+static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
+{
+ switch (block) {
+ case STMPE_BLOCK_PWM:
+ return 2;
+
+ case STMPE_BLOCK_KEYPAD:
+ return 1;
+
+ case STMPE_BLOCK_GPIO:
+ default:
+ return 0;
+ }
+}
+
+static struct stmpe_variant_info stmpe1601 = {
+ .name = "stmpe1601",
+ .id_val = 0x0210,
+ .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */
+ .num_gpios = 16,
+ .af_bits = 2,
+ .regs = stmpe1601_regs,
+ .blocks = stmpe1601_blocks,
+ .num_blocks = ARRAY_SIZE(stmpe1601_blocks),
+ .num_irqs = STMPE1601_NR_INTERNAL_IRQS,
+ .enable = stmpe1601_enable,
+ .get_altfunc = stmpe1601_get_altfunc,
+ .enable_autosleep = stmpe1601_autosleep,
+};
+
+/*
+ * STMPE24XX
+ */
+
+static const u8 stmpe24xx_regs[] = {
+ [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID,
+ [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB,
+ [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB,
+ [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB,
+ [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB,
+ [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB,
+ [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB,
+ [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
+ [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
+ [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
+ [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
+ [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
+ [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
+ [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB,
+};
+
+static struct stmpe_variant_block stmpe24xx_blocks[] = {
+ {
+ .cell = &stmpe_gpio_cell,
+ .irq = STMPE24XX_IRQ_GPIOC,
+ .block = STMPE_BLOCK_GPIO,
+ },
+ {
+ .cell = &stmpe_keypad_cell,
+ .irq = STMPE24XX_IRQ_KEYPAD,
+ .block = STMPE_BLOCK_KEYPAD,
+ },
+};
+
+static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
+ bool enable)
+{
+ unsigned int mask = 0;
+
+ if (blocks & STMPE_BLOCK_GPIO)
+ mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
+
+ if (blocks & STMPE_BLOCK_KEYPAD)
+ mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
+
+ return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask,
+ enable ? mask : 0);
+}
+
+static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
+{
+ switch (block) {
+ case STMPE_BLOCK_ROTATOR:
+ return 2;
+
+ case STMPE_BLOCK_KEYPAD:
+ return 1;
+
+ case STMPE_BLOCK_GPIO:
+ default:
+ return 0;
+ }
+}
+
+static struct stmpe_variant_info stmpe2401 = {
+ .name = "stmpe2401",
+ .id_val = 0x0101,
+ .id_mask = 0xffff,
+ .num_gpios = 24,
+ .af_bits = 2,
+ .regs = stmpe24xx_regs,
+ .blocks = stmpe24xx_blocks,
+ .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
+ .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
+ .enable = stmpe24xx_enable,
+ .get_altfunc = stmpe24xx_get_altfunc,
+};
+
+static struct stmpe_variant_info stmpe2403 = {
+ .name = "stmpe2403",
+ .id_val = 0x0120,
+ .id_mask = 0xffff,
+ .num_gpios = 24,
+ .af_bits = 2,
+ .regs = stmpe24xx_regs,
+ .blocks = stmpe24xx_blocks,
+ .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
+ .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
+ .enable = stmpe24xx_enable,
+ .get_altfunc = stmpe24xx_get_altfunc,
+ .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */
+};
+
+static struct stmpe_variant_info *stmpe_variant_info[] = {
+ [STMPE811] = &stmpe811,
+ [STMPE1601] = &stmpe1601,
+ [STMPE2401] = &stmpe2401,
+ [STMPE2403] = &stmpe2403,
+};
+
+static irqreturn_t stmpe_irq(int irq, void *data)
+{
+ struct stmpe *stmpe = data;
+ struct stmpe_variant_info *variant = stmpe->variant;
+ int num = DIV_ROUND_UP(variant->num_irqs, 8);
+ u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
+ u8 isr[num];
+ int ret;
+ int i;
+
+ ret = stmpe_block_read(stmpe, israddr, num, isr);
+ if (ret < 0)
+ return IRQ_NONE;
+
+ for (i = 0; i < num; i++) {
+ int bank = num - i - 1;
+ u8 status = isr[i];
+ u8 clear;
+
+ status &= stmpe->ier[bank];
+ if (!status)
+ continue;
+
+ clear = status;
+ while (status) {
+ int bit = __ffs(status);
+ int line = bank * 8 + bit;
+
+ handle_nested_irq(stmpe->irq_base + line);
+ status &= ~(1 << bit);
+ }
+
+ stmpe_reg_write(stmpe, israddr + i, clear);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void stmpe_irq_lock(unsigned int irq)
+{
+ struct stmpe *stmpe = get_irq_chip_data(irq);
+
+ mutex_lock(&stmpe->irq_lock);
+}
+
+static void stmpe_irq_sync_unlock(unsigned int irq)
+{
+ struct stmpe *stmpe = get_irq_chip_data(irq);
+ struct stmpe_variant_info *variant = stmpe->variant;
+ int num = DIV_ROUND_UP(variant->num_irqs, 8);
+ int i;
+
+ for (i = 0; i < num; i++) {
+ u8 new = stmpe->ier[i];
+ u8 old = stmpe->oldier[i];
+
+ if (new == old)
+ continue;
+
+ stmpe->oldier[i] = new;
+ stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB] - i, new);
+ }
+
+ mutex_unlock(&stmpe->irq_lock);
+}
+
+static void stmpe_irq_mask(unsigned int irq)
+{
+ struct stmpe *stmpe = get_irq_chip_data(irq);
+ int offset = irq - stmpe->irq_base;
+ int regoffset = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ stmpe->ier[regoffset] &= ~mask;
+}
+
+static void stmpe_irq_unmask(unsigned int irq)
+{
+ struct stmpe *stmpe = get_irq_chip_data(irq);
+ int offset = irq - stmpe->irq_base;
+ int regoffset = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ stmpe->ier[regoffset] |= mask;
+}
+
+static struct irq_chip stmpe_irq_chip = {
+ .name = "stmpe",
+ .bus_lock = stmpe_irq_lock,
+ .bus_sync_unlock = stmpe_irq_sync_unlock,
+ .mask = stmpe_irq_mask,
+ .unmask = stmpe_irq_unmask,
+};
+
+static int __devinit stmpe_irq_init(struct stmpe *stmpe)
+{
+ int num_irqs = stmpe->variant->num_irqs;
+ int base = stmpe->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + num_irqs; irq++) {
+ set_irq_chip_data(irq, stmpe);
+ set_irq_chip_and_handler(irq, &stmpe_irq_chip,
+ handle_edge_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ return 0;
+}
+
+static void stmpe_irq_remove(struct stmpe *stmpe)
+{
+ int num_irqs = stmpe->variant->num_irqs;
+ int base = stmpe->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + num_irqs; irq++) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#endif
+ set_irq_chip_and_handler(irq, NULL, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+}
+
+static int __devinit stmpe_chip_init(struct stmpe *stmpe)
+{
+ unsigned int irq_trigger = stmpe->pdata->irq_trigger;
+ int autosleep_timeout = stmpe->pdata->autosleep_timeout;
+ struct stmpe_variant_info *variant = stmpe->variant;
+ u8 icr = STMPE_ICR_LSB_GIM;
+ unsigned int id;
+ u8 data[2];
+ int ret;
+
+ ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
+ ARRAY_SIZE(data), data);
+ if (ret < 0)
+ return ret;
+
+ id = (data[0] << 8) | data[1];
+ if ((id & variant->id_mask) != variant->id_val) {
+ dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
+ return -EINVAL;
+ }
+
+ dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
+
+ /* Disable all modules -- subdrivers should enable what they need. */
+ ret = stmpe_disable(stmpe, ~0);
+ if (ret)
+ return ret;
+
+ if (irq_trigger == IRQF_TRIGGER_FALLING ||
+ irq_trigger == IRQF_TRIGGER_RISING)
+ icr |= STMPE_ICR_LSB_EDGE;
+
+ if (irq_trigger == IRQF_TRIGGER_RISING ||
+ irq_trigger == IRQF_TRIGGER_HIGH)
+ icr |= STMPE_ICR_LSB_HIGH;
+
+ if (stmpe->pdata->irq_invert_polarity)
+ icr ^= STMPE_ICR_LSB_HIGH;
+
+ if (stmpe->pdata->autosleep) {
+ ret = stmpe_autosleep(stmpe, autosleep_timeout);
+ if (ret)
+ return ret;
+ }
+
+ return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
+}
+
+static int __devinit stmpe_add_device(struct stmpe *stmpe,
+ struct mfd_cell *cell, int irq)
+{
+ return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
+ NULL, stmpe->irq_base + irq);
+}
+
+static int __devinit stmpe_devices_init(struct stmpe *stmpe)
+{
+ struct stmpe_variant_info *variant = stmpe->variant;
+ unsigned int platform_blocks = stmpe->pdata->blocks;
+ int ret = -EINVAL;
+ int i;
+
+ for (i = 0; i < variant->num_blocks; i++) {
+ struct stmpe_variant_block *block = &variant->blocks[i];
+
+ if (!(platform_blocks & block->block))
+ continue;
+
+ platform_blocks &= ~block->block;
+ ret = stmpe_add_device(stmpe, block->cell, block->irq);
+ if (ret)
+ return ret;
+ }
+
+ if (platform_blocks)
+ dev_warn(stmpe->dev,
+ "platform wants blocks (%#x) not present on variant",
+ platform_blocks);
+
+ return ret;
+}
+
+static int __devinit stmpe_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct stmpe_platform_data *pdata = i2c->dev.platform_data;
+ struct stmpe *stmpe;
+ int ret;
+
+ if (!pdata)
+ return -EINVAL;
+
+ stmpe = kzalloc(sizeof(struct stmpe), GFP_KERNEL);
+ if (!stmpe)
+ return -ENOMEM;
+
+ mutex_init(&stmpe->irq_lock);
+ mutex_init(&stmpe->lock);
+
+ stmpe->dev = &i2c->dev;
+ stmpe->i2c = i2c;
+
+ stmpe->pdata = pdata;
+ stmpe->irq_base = pdata->irq_base;
+
+ stmpe->partnum = id->driver_data;
+ stmpe->variant = stmpe_variant_info[stmpe->partnum];
+ stmpe->regs = stmpe->variant->regs;
+ stmpe->num_gpios = stmpe->variant->num_gpios;
+
+ i2c_set_clientdata(i2c, stmpe);
+
+ ret = stmpe_chip_init(stmpe);
+ if (ret)
+ goto out_free;
+
+ ret = stmpe_irq_init(stmpe);
+ if (ret)
+ goto out_free;
+
+ ret = request_threaded_irq(stmpe->i2c->irq, NULL, stmpe_irq,
+ pdata->irq_trigger | IRQF_ONESHOT,
+ "stmpe", stmpe);
+ if (ret) {
+ dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret);
+ goto out_removeirq;
+ }
+
+ ret = stmpe_devices_init(stmpe);
+ if (ret) {
+ dev_err(stmpe->dev, "failed to add children\n");
+ goto out_removedevs;
+ }
+
+ return 0;
+
+out_removedevs:
+ mfd_remove_devices(stmpe->dev);
+ free_irq(stmpe->i2c->irq, stmpe);
+out_removeirq:
+ stmpe_irq_remove(stmpe);
+out_free:
+ kfree(stmpe);
+ return ret;
+}
+
+static int __devexit stmpe_remove(struct i2c_client *client)
+{
+ struct stmpe *stmpe = i2c_get_clientdata(client);
+
+ mfd_remove_devices(stmpe->dev);
+
+ free_irq(stmpe->i2c->irq, stmpe);
+ stmpe_irq_remove(stmpe);
+
+ kfree(stmpe);
+
+ return 0;
+}
+
+static const struct i2c_device_id stmpe_id[] = {
+ { "stmpe811", STMPE811 },
+ { "stmpe1601", STMPE1601 },
+ { "stmpe2401", STMPE2401 },
+ { "stmpe2403", STMPE2403 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, stmpe_id);
+
+static struct i2c_driver stmpe_driver = {
+ .driver.name = "stmpe",
+ .driver.owner = THIS_MODULE,
+ .probe = stmpe_probe,
+ .remove = __devexit_p(stmpe_remove),
+ .id_table = stmpe_id,
+};
+
+static int __init stmpe_init(void)
+{
+ return i2c_add_driver(&stmpe_driver);
+}
+subsys_initcall(stmpe_init);
+
+static void __exit stmpe_exit(void)
+{
+ i2c_del_driver(&stmpe_driver);
+}
+module_exit(stmpe_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPE MFD core driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#ifndef __STMPE_H
+#define __STMPE_H
+
+#ifdef STMPE_DUMP_BYTES
+static inline void stmpe_dump_bytes(const char *str, const void *buf,
+ size_t len)
+{
+ print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len);
+}
+#else
+static inline void stmpe_dump_bytes(const char *str, const void *buf,
+ size_t len)
+{
+}
+#endif
+
+/**
+ * struct stmpe_variant_block - information about block
+ * @cell: base mfd cell
+ * @irq: interrupt number to be added to each IORESOURCE_IRQ
+ * in the cell
+ * @block: block id; used for identification with platform data and for
+ * enable and altfunc callbacks
+ */
+struct stmpe_variant_block {
+ struct mfd_cell *cell;
+ int irq;
+ enum stmpe_block block;
+};
+
+/**
+ * struct stmpe_variant_info - variant-specific information
+ * @name: part name
+ * @id_val: content of CHIPID register
+ * @id_mask: bits valid in CHIPID register for comparison with id_val
+ * @num_gpios: number of GPIOS
+ * @af_bits: number of bits used to specify the alternate function
+ * @blocks: list of blocks present on this device
+ * @num_blocks: number of blocks present on this device
+ * @num_irqs: number of internal IRQs available on this device
+ * @enable: callback to enable the specified blocks.
+ * Called with the I/O lock held.
+ * @get_altfunc: callback to get the alternate function number for the
+ * specific block
+ * @enable_autosleep: callback to configure autosleep with specified timeout
+ */
+struct stmpe_variant_info {
+ const char *name;
+ u16 id_val;
+ u16 id_mask;
+ int num_gpios;
+ int af_bits;
+ const u8 *regs;
+ struct stmpe_variant_block *blocks;
+ int num_blocks;
+ int num_irqs;
+ int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable);
+ int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block);
+ int (*enable_autosleep)(struct stmpe *stmpe, int autosleep_timeout);
+};
+
+#define STMPE_ICR_LSB_HIGH (1 << 2)
+#define STMPE_ICR_LSB_EDGE (1 << 1)
+#define STMPE_ICR_LSB_GIM (1 << 0)
+
+/*
+ * STMPE811
+ */
+
+#define STMPE811_IRQ_TOUCH_DET 0
+#define STMPE811_IRQ_FIFO_TH 1
+#define STMPE811_IRQ_FIFO_OFLOW 2
+#define STMPE811_IRQ_FIFO_FULL 3
+#define STMPE811_IRQ_FIFO_EMPTY 4
+#define STMPE811_IRQ_TEMP_SENS 5
+#define STMPE811_IRQ_ADC 6
+#define STMPE811_IRQ_GPIOC 7
+#define STMPE811_NR_INTERNAL_IRQS 8
+
+#define STMPE811_REG_CHIP_ID 0x00
+#define STMPE811_REG_SYS_CTRL2 0x04
+#define STMPE811_REG_INT_CTRL 0x09
+#define STMPE811_REG_INT_EN 0x0A
+#define STMPE811_REG_INT_STA 0x0B
+#define STMPE811_REG_GPIO_INT_EN 0x0C
+#define STMPE811_REG_GPIO_INT_STA 0x0D
+#define STMPE811_REG_GPIO_SET_PIN 0x10
+#define STMPE811_REG_GPIO_CLR_PIN 0x11
+#define STMPE811_REG_GPIO_MP_STA 0x12
+#define STMPE811_REG_GPIO_DIR 0x13
+#define STMPE811_REG_GPIO_ED 0x14
+#define STMPE811_REG_GPIO_RE 0x15
+#define STMPE811_REG_GPIO_FE 0x16
+#define STMPE811_REG_GPIO_AF 0x17
+
+#define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0)
+#define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1)
+#define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2)
+#define STMPE811_SYS_CTRL2_TS_OFF (1 << 3)
+
+/*
+ * STMPE1601
+ */
+
+#define STMPE1601_IRQ_GPIOC 8
+#define STMPE1601_IRQ_PWM3 7
+#define STMPE1601_IRQ_PWM2 6
+#define STMPE1601_IRQ_PWM1 5
+#define STMPE1601_IRQ_PWM0 4
+#define STMPE1601_IRQ_KEYPAD_OVER 2
+#define STMPE1601_IRQ_KEYPAD 1
+#define STMPE1601_IRQ_WAKEUP 0
+#define STMPE1601_NR_INTERNAL_IRQS 9
+
+#define STMPE1601_REG_SYS_CTRL 0x02
+#define STMPE1601_REG_SYS_CTRL2 0x03
+#define STMPE1601_REG_ICR_LSB 0x11
+#define STMPE1601_REG_IER_LSB 0x13
+#define STMPE1601_REG_ISR_MSB 0x14
+#define STMPE1601_REG_CHIP_ID 0x80
+#define STMPE1601_REG_INT_EN_GPIO_MASK_LSB 0x17
+#define STMPE1601_REG_INT_STA_GPIO_MSB 0x18
+#define STMPE1601_REG_GPIO_MP_LSB 0x87
+#define STMPE1601_REG_GPIO_SET_LSB 0x83
+#define STMPE1601_REG_GPIO_CLR_LSB 0x85
+#define STMPE1601_REG_GPIO_SET_DIR_LSB 0x89
+#define STMPE1601_REG_GPIO_ED_MSB 0x8A
+#define STMPE1601_REG_GPIO_RE_LSB 0x8D
+#define STMPE1601_REG_GPIO_FE_LSB 0x8F
+#define STMPE1601_REG_GPIO_AF_U_MSB 0x92
+
+#define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3)
+#define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1)
+#define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0)
+
+/* The 1601/2403 share the same masks */
+#define STMPE1601_AUTOSLEEP_TIMEOUT_MASK (0x7)
+#define STPME1601_AUTOSLEEP_ENABLE (1 << 3)
+
+/*
+ * STMPE24xx
+ */
+
+#define STMPE24XX_IRQ_GPIOC 8
+#define STMPE24XX_IRQ_PWM2 7
+#define STMPE24XX_IRQ_PWM1 6
+#define STMPE24XX_IRQ_PWM0 5
+#define STMPE24XX_IRQ_ROT_OVER 4
+#define STMPE24XX_IRQ_ROT 3
+#define STMPE24XX_IRQ_KEYPAD_OVER 2
+#define STMPE24XX_IRQ_KEYPAD 1
+#define STMPE24XX_IRQ_WAKEUP 0
+#define STMPE24XX_NR_INTERNAL_IRQS 9
+
+#define STMPE24XX_REG_SYS_CTRL 0x02
+#define STMPE24XX_REG_ICR_LSB 0x11
+#define STMPE24XX_REG_IER_LSB 0x13
+#define STMPE24XX_REG_ISR_MSB 0x14
+#define STMPE24XX_REG_CHIP_ID 0x80
+#define STMPE24XX_REG_IEGPIOR_LSB 0x18
+#define STMPE24XX_REG_ISGPIOR_MSB 0x19
+#define STMPE24XX_REG_GPMR_LSB 0xA5
+#define STMPE24XX_REG_GPSR_LSB 0x85
+#define STMPE24XX_REG_GPCR_LSB 0x88
+#define STMPE24XX_REG_GPDR_LSB 0x8B
+#define STMPE24XX_REG_GPEDR_MSB 0x8C
+#define STMPE24XX_REG_GPRER_LSB 0x91
+#define STMPE24XX_REG_GPFER_LSB 0x94
+#define STMPE24XX_REG_GPAFR_U_MSB 0x9B
+
+#define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3)
+#define STMPE24XX_SYSCON_ENABLE_PWM (1 << 2)
+#define STMPE24XX_SYS_CTRL_ENABLE_KPC (1 << 1)
+#define STMPE24XX_SYSCON_ENABLE_ROT (1 << 0)
+
+#endif
t7l66xb->clk48m = clk_get(&dev->dev, "CLK_CK48M");
if (IS_ERR(t7l66xb->clk48m)) {
ret = PTR_ERR(t7l66xb->clk48m);
- clk_put(t7l66xb->clk32k);
goto err_clk48m_get;
}
ret = pdata->disable(dev);
clk_disable(t7l66xb->clk48m);
clk_put(t7l66xb->clk48m);
+ clk_disable(t7l66xb->clk32k);
+ clk_put(t7l66xb->clk32k);
t7l66xb_detach_irq(dev);
iounmap(t7l66xb->scr);
release_resource(&t7l66xb->rscr);
},
};
-static int tc6387xb_probe(struct platform_device *dev)
+static int __devinit tc6387xb_probe(struct platform_device *dev)
{
struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
struct resource *iomem, *rscr;
if (!ret)
return 0;
+ iounmap(tc6387xb->scr);
err_ioremap:
release_resource(&tc6387xb->rscr);
err_resource:
return ret;
}
-static int tc6387xb_remove(struct platform_device *dev)
+static int __devexit tc6387xb_remove(struct platform_device *dev)
{
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
mfd_remove_devices(&dev->dev);
- clk_disable(clk32k);
- clk_put(clk32k);
+ iounmap(tc6387xb->scr);
+ release_resource(&tc6387xb->rscr);
+ clk_disable(tc6387xb->clk32k);
+ clk_put(tc6387xb->clk32k);
platform_set_drvdata(dev, NULL);
+ kfree(tc6387xb);
return 0;
}
.name = "tc6387xb",
},
.probe = tc6387xb_probe,
- .remove = tc6387xb_remove,
+ .remove = __devexit_p(tc6387xb_remove),
.suspend = tc6387xb_suspend,
.resume = tc6387xb_resume,
};
if (tc6393xb->gpio.base != -1)
temp = gpiochip_remove(&tc6393xb->gpio);
tcpd->disable(dev);
-err_clk_enable:
- clk_disable(tc6393xb->clk);
err_enable:
+ clk_disable(tc6393xb->clk);
+err_clk_enable:
iounmap(tc6393xb->scr);
err_ioremap:
release_resource(&tc6393xb->rscr);
int ret = 0;
tps6507x = kzalloc(sizeof(struct tps6507x_dev), GFP_KERNEL);
- if (tps6507x == NULL) {
- kfree(i2c);
+ if (tps6507x == NULL)
return -ENOMEM;
- }
i2c_set_clientdata(i2c, tps6507x);
tps6507x->dev = &i2c->dev;
--- /dev/null
+/*
+ * Core driver for TI TPS6586x PMIC family
+ *
+ * Copyright (c) 2010 CompuLab Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on da903x.c.
+ * Copyright (C) 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps6586x.h>
+
+/* GPIO control registers */
+#define TPS6586X_GPIOSET1 0x5d
+#define TPS6586X_GPIOSET2 0x5e
+
+/* device id */
+#define TPS6586X_VERSIONCRC 0xcd
+#define TPS658621A_VERSIONCRC 0x15
+
+struct tps6586x {
+ struct mutex lock;
+ struct device *dev;
+ struct i2c_client *client;
+
+ struct gpio_chip gpio;
+};
+
+static inline int __tps6586x_read(struct i2c_client *client,
+ int reg, uint8_t *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed reading at 0x%02x\n", reg);
+ return ret;
+ }
+
+ *val = (uint8_t)ret;
+
+ return 0;
+}
+
+static inline int __tps6586x_reads(struct i2c_client *client, int reg,
+ int len, uint8_t *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(client, reg, len, val);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed reading from 0x%02x\n", reg);
+ return ret;
+ }
+
+ return 0;
+}
+
+static inline int __tps6586x_write(struct i2c_client *client,
+ int reg, uint8_t val)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, reg, val);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed writing 0x%02x to 0x%02x\n",
+ val, reg);
+ return ret;
+ }
+
+ return 0;
+}
+
+static inline int __tps6586x_writes(struct i2c_client *client, int reg,
+ int len, uint8_t *val)
+{
+ int ret;
+
+ ret = i2c_smbus_write_i2c_block_data(client, reg, len, val);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed writings to 0x%02x\n", reg);
+ return ret;
+ }
+
+ return 0;
+}
+
+int tps6586x_write(struct device *dev, int reg, uint8_t val)
+{
+ return __tps6586x_write(to_i2c_client(dev), reg, val);
+}
+EXPORT_SYMBOL_GPL(tps6586x_write);
+
+int tps6586x_writes(struct device *dev, int reg, int len, uint8_t *val)
+{
+ return __tps6586x_writes(to_i2c_client(dev), reg, len, val);
+}
+EXPORT_SYMBOL_GPL(tps6586x_writes);
+
+int tps6586x_read(struct device *dev, int reg, uint8_t *val)
+{
+ return __tps6586x_read(to_i2c_client(dev), reg, val);
+}
+EXPORT_SYMBOL_GPL(tps6586x_read);
+
+int tps6586x_reads(struct device *dev, int reg, int len, uint8_t *val)
+{
+ return __tps6586x_reads(to_i2c_client(dev), reg, len, val);
+}
+EXPORT_SYMBOL_GPL(tps6586x_reads);
+
+int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask)
+{
+ struct tps6586x *tps6586x = dev_get_drvdata(dev);
+ uint8_t reg_val;
+ int ret = 0;
+
+ mutex_lock(&tps6586x->lock);
+
+ ret = __tps6586x_read(to_i2c_client(dev), reg, ®_val);
+ if (ret)
+ goto out;
+
+ if ((reg_val & bit_mask) == 0) {
+ reg_val |= bit_mask;
+ ret = __tps6586x_write(to_i2c_client(dev), reg, reg_val);
+ }
+out:
+ mutex_unlock(&tps6586x->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tps6586x_set_bits);
+
+int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask)
+{
+ struct tps6586x *tps6586x = dev_get_drvdata(dev);
+ uint8_t reg_val;
+ int ret = 0;
+
+ mutex_lock(&tps6586x->lock);
+
+ ret = __tps6586x_read(to_i2c_client(dev), reg, ®_val);
+ if (ret)
+ goto out;
+
+ if (reg_val & bit_mask) {
+ reg_val &= ~bit_mask;
+ ret = __tps6586x_write(to_i2c_client(dev), reg, reg_val);
+ }
+out:
+ mutex_unlock(&tps6586x->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tps6586x_clr_bits);
+
+int tps6586x_update(struct device *dev, int reg, uint8_t val, uint8_t mask)
+{
+ struct tps6586x *tps6586x = dev_get_drvdata(dev);
+ uint8_t reg_val;
+ int ret = 0;
+
+ mutex_lock(&tps6586x->lock);
+
+ ret = __tps6586x_read(tps6586x->client, reg, ®_val);
+ if (ret)
+ goto out;
+
+ if ((reg_val & mask) != val) {
+ reg_val = (reg_val & ~mask) | val;
+ ret = __tps6586x_write(tps6586x->client, reg, reg_val);
+ }
+out:
+ mutex_unlock(&tps6586x->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tps6586x_update);
+
+static int tps6586x_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ struct tps6586x *tps6586x = container_of(gc, struct tps6586x, gpio);
+ uint8_t val;
+ int ret;
+
+ ret = __tps6586x_read(tps6586x->client, TPS6586X_GPIOSET2, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & (1 << offset));
+}
+
+
+static void tps6586x_gpio_set(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct tps6586x *tps6586x = container_of(chip, struct tps6586x, gpio);
+
+ __tps6586x_write(tps6586x->client, TPS6586X_GPIOSET2,
+ value << offset);
+}
+
+static int tps6586x_gpio_output(struct gpio_chip *gc, unsigned offset,
+ int value)
+{
+ struct tps6586x *tps6586x = container_of(gc, struct tps6586x, gpio);
+ uint8_t val, mask;
+
+ tps6586x_gpio_set(gc, offset, value);
+
+ val = 0x1 << (offset * 2);
+ mask = 0x3 << (offset * 2);
+
+ return tps6586x_update(tps6586x->dev, TPS6586X_GPIOSET1, val, mask);
+}
+
+static void tps6586x_gpio_init(struct tps6586x *tps6586x, int gpio_base)
+{
+ int ret;
+
+ if (!gpio_base)
+ return;
+
+ tps6586x->gpio.owner = THIS_MODULE;
+ tps6586x->gpio.label = tps6586x->client->name;
+ tps6586x->gpio.dev = tps6586x->dev;
+ tps6586x->gpio.base = gpio_base;
+ tps6586x->gpio.ngpio = 4;
+ tps6586x->gpio.can_sleep = 1;
+
+ /* FIXME: add handling of GPIOs as dedicated inputs */
+ tps6586x->gpio.direction_output = tps6586x_gpio_output;
+ tps6586x->gpio.set = tps6586x_gpio_set;
+ tps6586x->gpio.get = tps6586x_gpio_get;
+
+ ret = gpiochip_add(&tps6586x->gpio);
+ if (ret)
+ dev_warn(tps6586x->dev, "GPIO registration failed: %d\n", ret);
+}
+
+static int __remove_subdev(struct device *dev, void *unused)
+{
+ platform_device_unregister(to_platform_device(dev));
+ return 0;
+}
+
+static int tps6586x_remove_subdevs(struct tps6586x *tps6586x)
+{
+ return device_for_each_child(tps6586x->dev, NULL, __remove_subdev);
+}
+
+static int __devinit tps6586x_add_subdevs(struct tps6586x *tps6586x,
+ struct tps6586x_platform_data *pdata)
+{
+ struct tps6586x_subdev_info *subdev;
+ struct platform_device *pdev;
+ int i, ret = 0;
+
+ for (i = 0; i < pdata->num_subdevs; i++) {
+ subdev = &pdata->subdevs[i];
+
+ pdev = platform_device_alloc(subdev->name, subdev->id);
+
+ pdev->dev.parent = tps6586x->dev;
+ pdev->dev.platform_data = subdev->platform_data;
+
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto failed;
+ }
+ return 0;
+
+failed:
+ tps6586x_remove_subdevs(tps6586x);
+ return ret;
+}
+
+static int __devinit tps6586x_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tps6586x_platform_data *pdata = client->dev.platform_data;
+ struct tps6586x *tps6586x;
+ int ret;
+
+ if (!pdata) {
+ dev_err(&client->dev, "tps6586x requires platform data\n");
+ return -ENOTSUPP;
+ }
+
+ ret = i2c_smbus_read_byte_data(client, TPS6586X_VERSIONCRC);
+ if (ret < 0) {
+ dev_err(&client->dev, "Chip ID read failed: %d\n", ret);
+ return -EIO;
+ }
+
+ if (ret != TPS658621A_VERSIONCRC) {
+ dev_err(&client->dev, "Unsupported chip ID: %x\n", ret);
+ return -ENODEV;
+ }
+
+ tps6586x = kzalloc(sizeof(struct tps6586x), GFP_KERNEL);
+ if (tps6586x == NULL)
+ return -ENOMEM;
+
+ tps6586x->client = client;
+ tps6586x->dev = &client->dev;
+ i2c_set_clientdata(client, tps6586x);
+
+ mutex_init(&tps6586x->lock);
+
+ ret = tps6586x_add_subdevs(tps6586x, pdata);
+ if (ret) {
+ dev_err(&client->dev, "add devices failed: %d\n", ret);
+ goto err_add_devs;
+ }
+
+ tps6586x_gpio_init(tps6586x, pdata->gpio_base);
+
+ return 0;
+
+err_add_devs:
+ kfree(tps6586x);
+ return ret;
+}
+
+static int __devexit tps6586x_i2c_remove(struct i2c_client *client)
+{
+ return 0;
+}
+
+static const struct i2c_device_id tps6586x_id_table[] = {
+ { "tps6586x", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, tps6586x_id_table);
+
+static struct i2c_driver tps6586x_driver = {
+ .driver = {
+ .name = "tps6586x",
+ .owner = THIS_MODULE,
+ },
+ .probe = tps6586x_i2c_probe,
+ .remove = __devexit_p(tps6586x_i2c_remove),
+ .id_table = tps6586x_id_table,
+};
+
+static int __init tps6586x_init(void)
+{
+ return i2c_add_driver(&tps6586x_driver);
+}
+subsys_initcall(tps6586x_init);
+
+static void __exit tps6586x_exit(void)
+{
+ i2c_del_driver(&tps6586x_driver);
+}
+module_exit(tps6586x_exit);
+
+MODULE_DESCRIPTION("TPS6586X core driver");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_LICENSE("GPL");
+
--- /dev/null
+/*
+ * twl6030_pwm.c
+ * Driver for PHOENIX (TWL6030) Pulse Width Modulator
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/twl.h>
+#include <linux/slab.h>
+
+#define LED_PWM_CTRL1 0xF4
+#define LED_PWM_CTRL2 0xF5
+
+/* Max value for CTRL1 register */
+#define PWM_CTRL1_MAX 255
+
+/* Pull down disable */
+#define PWM_CTRL2_DIS_PD (1 << 6)
+
+/* Current control 2.5 milli Amps */
+#define PWM_CTRL2_CURR_02 (2 << 4)
+
+/* LED supply source */
+#define PWM_CTRL2_SRC_VAC (1 << 2)
+
+/* LED modes */
+#define PWM_CTRL2_MODE_HW (0 << 0)
+#define PWM_CTRL2_MODE_SW (1 << 0)
+#define PWM_CTRL2_MODE_DIS (2 << 0)
+
+#define PWM_CTRL2_MODE_MASK 0x3
+
+struct pwm_device {
+ const char *label;
+ unsigned int pwm_id;
+};
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ u8 duty_cycle;
+ int ret;
+
+ if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ duty_cycle = (duty_ns * PWM_CTRL1_MAX) / period_ns;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, duty_cycle, LED_PWM_CTRL1);
+
+ if (ret < 0) {
+ pr_err("%s: Failed to configure PWM, Error %d\n",
+ pwm->label, ret);
+ return ret;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ u8 val;
+ int ret;
+
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
+ if (ret < 0) {
+ pr_err("%s: Failed to enable PWM, Error %d\n", pwm->label, ret);
+ return ret;
+ }
+
+ /* Change mode to software control */
+ val &= ~PWM_CTRL2_MODE_MASK;
+ val |= PWM_CTRL2_MODE_SW;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
+ if (ret < 0) {
+ pr_err("%s: Failed to enable PWM, Error %d\n", pwm->label, ret);
+ return ret;
+ }
+
+ twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
+ return 0;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ u8 val;
+ int ret;
+
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
+ if (ret < 0) {
+ pr_err("%s: Failed to disable PWM, Error %d\n",
+ pwm->label, ret);
+ return;
+ }
+
+ val &= ~PWM_CTRL2_MODE_MASK;
+ val |= PWM_CTRL2_MODE_HW;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
+ if (ret < 0) {
+ pr_err("%s: Failed to disable PWM, Error %d\n",
+ pwm->label, ret);
+ return;
+ }
+ return;
+}
+EXPORT_SYMBOL(pwm_disable);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ u8 val;
+ int ret;
+ struct pwm_device *pwm;
+
+ pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+ if (pwm == NULL) {
+ pr_err("%s: failed to allocate memory\n", label);
+ return NULL;
+ }
+
+ pwm->label = label;
+ pwm->pwm_id = pwm_id;
+
+ /* Configure PWM */
+ val = PWM_CTRL2_DIS_PD | PWM_CTRL2_CURR_02 | PWM_CTRL2_SRC_VAC |
+ PWM_CTRL2_MODE_HW;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
+
+ if (ret < 0) {
+ pr_err("%s: Failed to configure PWM, Error %d\n",
+ pwm->label, ret);
+
+ kfree(pwm);
+ return NULL;
+ }
+
+ return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+ pwm_disable(pwm);
+ kfree(pwm);
+}
+EXPORT_SYMBOL(pwm_free);
err3:
platform_device_put(ucb->ucb1400_ts);
err2:
- platform_device_unregister(ucb->ucb1400_gpio);
+ platform_device_del(ucb->ucb1400_gpio);
err1:
platform_device_put(ucb->ucb1400_gpio);
err0:
WM8311 = 0x8311,
WM8312 = 0x8312,
WM8320 = 0x8320,
+ WM8321 = 0x8321,
};
static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
dev_info(wm831x->dev, "WM8320 revision %c\n", 'A' + rev);
break;
+ case WM8321:
+ parent = WM8321;
+ wm831x->num_gpio = 12;
+ dev_info(wm831x->dev, "WM8321 revision %c\n", 'A' + rev);
+ break;
+
default:
dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret);
ret = -EINVAL;
NULL, 0);
break;
+ case WM8321:
+ ret = mfd_add_devices(wm831x->dev, -1,
+ wm8320_devs, ARRAY_SIZE(wm8320_devs),
+ NULL, 0);
+ break;
+
default:
/* If this happens the bus probe function is buggy */
BUG();
struct wm831x *wm831x;
wm831x = kzalloc(sizeof(struct wm831x), GFP_KERNEL);
- if (wm831x == NULL) {
- kfree(i2c);
+ if (wm831x == NULL)
return -ENOMEM;
- }
i2c_set_clientdata(i2c, wm831x);
wm831x->dev = &i2c->dev;
{ "wm8311", WM8311 },
{ "wm8312", WM8312 },
{ "wm8320", WM8320 },
+ { "wm8321", WM8321 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id);
}
out:
+ kfree(wm8350->reg_cache);
return ret;
}
ret = wm8350_irq_init(wm8350, irq, pdata);
if (ret < 0)
- goto err;
+ goto err_free;
if (wm8350->irq_base) {
ret = request_threaded_irq(wm8350->irq_base +
err_irq:
wm8350_irq_exit(wm8350);
-err:
+err_free:
kfree(wm8350->reg_cache);
+err:
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_device_init);
wm8994->supplies = kzalloc(sizeof(struct regulator_bulk_data) *
ARRAY_SIZE(wm8994_main_supplies),
GFP_KERNEL);
- if (!wm8994->supplies)
+ if (!wm8994->supplies) {
+ ret = -ENOMEM;
goto err;
+ }
for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
wm8994->supplies[i].supply = wm8994_main_supplies[i];
struct wm8994 *wm8994;
wm8994 = kzalloc(sizeof(struct wm8994), GFP_KERNEL);
- if (wm8994 == NULL) {
- kfree(i2c);
+ if (wm8994 == NULL)
return -ENOMEM;
- }
i2c_set_clientdata(i2c, wm8994);
wm8994->dev = &i2c->dev;
*/
void cs5535_mfgpt_free_timer(struct cs5535_mfgpt_timer *timer)
{
+ unsigned long flags;
+ uint16_t val;
+
+ /* timer can be made available again only if never set up */
+ val = cs5535_mfgpt_read(timer, MFGPT_REG_SETUP);
+ if (!(val & MFGPT_SETUP_SETUP)) {
+ spin_lock_irqsave(&timer->chip->lock, flags);
+ __set_bit(timer->nr, timer->chip->avail);
+ spin_unlock_irqrestore(&timer->chip->lock, flags);
+ }
+
kfree(timer);
}
EXPORT_SYMBOL_GPL(cs5535_mfgpt_free_timer);
module_param(recur_count, int, 0644);
MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\
"default is 10");
-module_param(cpoint_name, charp, 0644);
+module_param(cpoint_name, charp, 0444);
MODULE_PARM_DESC(cpoint_name, " Crash Point, where kernel is to be crashed");
-module_param(cpoint_type, charp, 0644);
+module_param(cpoint_type, charp, 0444);
MODULE_PARM_DESC(cpoint_type, " Crash Point Type, action to be taken on "\
"hitting the crash point");
module_param(cpoint_count, int, 0644);
#include <linux/kdev_t.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
+#include <linux/smp_lock.h>
#include <linux/scatterlist.h>
#include <linux/string_helpers.h>
struct mmc_blk_data *md = mmc_blk_get(bdev->bd_disk);
int ret = -ENXIO;
+ lock_kernel();
if (md) {
if (md->usage == 2)
check_disk_change(bdev);
ret = -EROFS;
}
}
+ unlock_kernel();
return ret;
}
{
struct mmc_blk_data *md = disk->private_data;
+ lock_kernel();
mmc_blk_put(md);
+ unlock_kernel();
return 0;
}
return cmd.resp[0];
}
-static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
+static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
+{
+ struct mmc_blk_data *md = mq->data;
+ struct mmc_card *card = md->queue.card;
+ unsigned int from, nr, arg;
+ int err = 0;
+
+ mmc_claim_host(card->host);
+
+ if (!mmc_can_erase(card)) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ from = blk_rq_pos(req);
+ nr = blk_rq_sectors(req);
+
+ if (mmc_can_trim(card))
+ arg = MMC_TRIM_ARG;
+ else
+ arg = MMC_ERASE_ARG;
+
+ err = mmc_erase(card, from, nr, arg);
+out:
+ spin_lock_irq(&md->lock);
+ __blk_end_request(req, err, blk_rq_bytes(req));
+ spin_unlock_irq(&md->lock);
+
+ mmc_release_host(card->host);
+
+ return err ? 0 : 1;
+}
+
+static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
+ struct request *req)
+{
+ struct mmc_blk_data *md = mq->data;
+ struct mmc_card *card = md->queue.card;
+ unsigned int from, nr, arg;
+ int err = 0;
+
+ mmc_claim_host(card->host);
+
+ if (!mmc_can_secure_erase_trim(card)) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ from = blk_rq_pos(req);
+ nr = blk_rq_sectors(req);
+
+ if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr))
+ arg = MMC_SECURE_TRIM1_ARG;
+ else
+ arg = MMC_SECURE_ERASE_ARG;
+
+ err = mmc_erase(card, from, nr, arg);
+ if (!err && arg == MMC_SECURE_TRIM1_ARG)
+ err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG);
+out:
+ spin_lock_irq(&md->lock);
+ __blk_end_request(req, err, blk_rq_bytes(req));
+ spin_unlock_irq(&md->lock);
+
+ mmc_release_host(card->host);
+
+ return err ? 0 : 1;
+}
+
+static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
{
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
return 0;
}
+static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
+{
+ if (req->cmd_flags & REQ_DISCARD) {
+ if (req->cmd_flags & REQ_SECURE)
+ return mmc_blk_issue_secdiscard_rq(mq, req);
+ else
+ return mmc_blk_issue_discard_rq(mq, req);
+ } else {
+ return mmc_blk_issue_rw_rq(mq, req);
+ }
+}
static inline int mmc_blk_readonly(struct mmc_card *card)
{
#include <linux/slab.h>
#include <linux/scatterlist.h>
+#include <linux/swap.h> /* For nr_free_buffer_pages() */
#define RESULT_OK 0
#define RESULT_FAIL 1
#define BUFFER_ORDER 2
#define BUFFER_SIZE (PAGE_SIZE << BUFFER_ORDER)
+/*
+ * Limit the test area size to the maximum MMC HC erase group size. Note that
+ * the maximum SD allocation unit size is just 4MiB.
+ */
+#define TEST_AREA_MAX_SIZE (128 * 1024 * 1024)
+
+/**
+ * struct mmc_test_pages - pages allocated by 'alloc_pages()'.
+ * @page: first page in the allocation
+ * @order: order of the number of pages allocated
+ */
+struct mmc_test_pages {
+ struct page *page;
+ unsigned int order;
+};
+
+/**
+ * struct mmc_test_mem - allocated memory.
+ * @arr: array of allocations
+ * @cnt: number of allocations
+ */
+struct mmc_test_mem {
+ struct mmc_test_pages *arr;
+ unsigned int cnt;
+};
+
+/**
+ * struct mmc_test_area - information for performance tests.
+ * @max_sz: test area size (in bytes)
+ * @dev_addr: address on card at which to do performance tests
+ * @max_segs: maximum segments in scatterlist @sg
+ * @blocks: number of (512 byte) blocks currently mapped by @sg
+ * @sg_len: length of currently mapped scatterlist @sg
+ * @mem: allocated memory
+ * @sg: scatterlist
+ */
+struct mmc_test_area {
+ unsigned long max_sz;
+ unsigned int dev_addr;
+ unsigned int max_segs;
+ unsigned int blocks;
+ unsigned int sg_len;
+ struct mmc_test_mem *mem;
+ struct scatterlist *sg;
+};
+
+/**
+ * struct mmc_test_card - test information.
+ * @card: card under test
+ * @scratch: transfer buffer
+ * @buffer: transfer buffer
+ * @highmem: buffer for highmem tests
+ * @area: information for performance tests
+ */
struct mmc_test_card {
struct mmc_card *card;
#ifdef CONFIG_HIGHMEM
struct page *highmem;
#endif
+ struct mmc_test_area area;
};
/*******************************************************************/
mmc_set_data_timeout(mrq->data, test->card);
}
+static int mmc_test_busy(struct mmc_command *cmd)
+{
+ return !(cmd->resp[0] & R1_READY_FOR_DATA) ||
+ (R1_CURRENT_STATE(cmd->resp[0]) == 7);
+}
+
/*
* Wait for the card to finish the busy state
*/
if (ret)
break;
- if (!busy && !(cmd.resp[0] & R1_READY_FOR_DATA)) {
+ if (!busy && mmc_test_busy(&cmd)) {
busy = 1;
printk(KERN_INFO "%s: Warning: Host did not "
"wait for busy state to end.\n",
mmc_hostname(test->card->host));
}
- } while (!(cmd.resp[0] & R1_READY_FOR_DATA));
+ } while (mmc_test_busy(&cmd));
return ret;
}
return 0;
}
+static void mmc_test_free_mem(struct mmc_test_mem *mem)
+{
+ if (!mem)
+ return;
+ while (mem->cnt--)
+ __free_pages(mem->arr[mem->cnt].page,
+ mem->arr[mem->cnt].order);
+ kfree(mem->arr);
+ kfree(mem);
+}
+
+/*
+ * Allocate a lot of memory, preferrably max_sz but at least min_sz. In case
+ * there isn't much memory do not exceed 1/16th total lowmem pages.
+ */
+static struct mmc_test_mem *mmc_test_alloc_mem(unsigned long min_sz,
+ unsigned long max_sz)
+{
+ unsigned long max_page_cnt = DIV_ROUND_UP(max_sz, PAGE_SIZE);
+ unsigned long min_page_cnt = DIV_ROUND_UP(min_sz, PAGE_SIZE);
+ unsigned long page_cnt = 0;
+ unsigned long limit = nr_free_buffer_pages() >> 4;
+ struct mmc_test_mem *mem;
+
+ if (max_page_cnt > limit)
+ max_page_cnt = limit;
+ if (max_page_cnt < min_page_cnt)
+ max_page_cnt = min_page_cnt;
+
+ mem = kzalloc(sizeof(struct mmc_test_mem), GFP_KERNEL);
+ if (!mem)
+ return NULL;
+
+ mem->arr = kzalloc(sizeof(struct mmc_test_pages) * max_page_cnt,
+ GFP_KERNEL);
+ if (!mem->arr)
+ goto out_free;
+
+ while (max_page_cnt) {
+ struct page *page;
+ unsigned int order;
+ gfp_t flags = GFP_KERNEL | GFP_DMA | __GFP_NOWARN |
+ __GFP_NORETRY;
+
+ order = get_order(max_page_cnt << PAGE_SHIFT);
+ while (1) {
+ page = alloc_pages(flags, order);
+ if (page || !order)
+ break;
+ order -= 1;
+ }
+ if (!page) {
+ if (page_cnt < min_page_cnt)
+ goto out_free;
+ break;
+ }
+ mem->arr[mem->cnt].page = page;
+ mem->arr[mem->cnt].order = order;
+ mem->cnt += 1;
+ if (max_page_cnt <= (1UL << order))
+ break;
+ max_page_cnt -= 1UL << order;
+ page_cnt += 1UL << order;
+ }
+
+ return mem;
+
+out_free:
+ mmc_test_free_mem(mem);
+ return NULL;
+}
+
+/*
+ * Map memory into a scatterlist. Optionally allow the same memory to be
+ * mapped more than once.
+ */
+static int mmc_test_map_sg(struct mmc_test_mem *mem, unsigned long sz,
+ struct scatterlist *sglist, int repeat,
+ unsigned int max_segs, unsigned int *sg_len)
+{
+ struct scatterlist *sg = NULL;
+ unsigned int i;
+
+ sg_init_table(sglist, max_segs);
+
+ *sg_len = 0;
+ do {
+ for (i = 0; i < mem->cnt; i++) {
+ unsigned long len = PAGE_SIZE << mem->arr[i].order;
+
+ if (sz < len)
+ len = sz;
+ if (sg)
+ sg = sg_next(sg);
+ else
+ sg = sglist;
+ if (!sg)
+ return -EINVAL;
+ sg_set_page(sg, mem->arr[i].page, len, 0);
+ sz -= len;
+ *sg_len += 1;
+ if (!sz)
+ break;
+ }
+ } while (sz && repeat);
+
+ if (sz)
+ return -EINVAL;
+
+ if (sg)
+ sg_mark_end(sg);
+
+ return 0;
+}
+
+/*
+ * Map memory into a scatterlist so that no pages are contiguous. Allow the
+ * same memory to be mapped more than once.
+ */
+static int mmc_test_map_sg_max_scatter(struct mmc_test_mem *mem,
+ unsigned long sz,
+ struct scatterlist *sglist,
+ unsigned int max_segs,
+ unsigned int *sg_len)
+{
+ struct scatterlist *sg = NULL;
+ unsigned int i = mem->cnt, cnt;
+ unsigned long len;
+ void *base, *addr, *last_addr = NULL;
+
+ sg_init_table(sglist, max_segs);
+
+ *sg_len = 0;
+ while (sz && i) {
+ base = page_address(mem->arr[--i].page);
+ cnt = 1 << mem->arr[i].order;
+ while (sz && cnt) {
+ addr = base + PAGE_SIZE * --cnt;
+ if (last_addr && last_addr + PAGE_SIZE == addr)
+ continue;
+ last_addr = addr;
+ len = PAGE_SIZE;
+ if (sz < len)
+ len = sz;
+ if (sg)
+ sg = sg_next(sg);
+ else
+ sg = sglist;
+ if (!sg)
+ return -EINVAL;
+ sg_set_page(sg, virt_to_page(addr), len, 0);
+ sz -= len;
+ *sg_len += 1;
+ }
+ }
+
+ if (sg)
+ sg_mark_end(sg);
+
+ return 0;
+}
+
+/*
+ * Calculate transfer rate in bytes per second.
+ */
+static unsigned int mmc_test_rate(uint64_t bytes, struct timespec *ts)
+{
+ uint64_t ns;
+
+ ns = ts->tv_sec;
+ ns *= 1000000000;
+ ns += ts->tv_nsec;
+
+ bytes *= 1000000000;
+
+ while (ns > UINT_MAX) {
+ bytes >>= 1;
+ ns >>= 1;
+ }
+
+ if (!ns)
+ return 0;
+
+ do_div(bytes, (uint32_t)ns);
+
+ return bytes;
+}
+
+/*
+ * Print the transfer rate.
+ */
+static void mmc_test_print_rate(struct mmc_test_card *test, uint64_t bytes,
+ struct timespec *ts1, struct timespec *ts2)
+{
+ unsigned int rate, sectors = bytes >> 9;
+ struct timespec ts;
+
+ ts = timespec_sub(*ts2, *ts1);
+
+ rate = mmc_test_rate(bytes, &ts);
+
+ printk(KERN_INFO "%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
+ "seconds (%u kB/s, %u KiB/s)\n",
+ mmc_hostname(test->card->host), sectors, sectors >> 1,
+ (sectors == 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
+ (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024);
+}
+
+/*
+ * Print the average transfer rate.
+ */
+static void mmc_test_print_avg_rate(struct mmc_test_card *test, uint64_t bytes,
+ unsigned int count, struct timespec *ts1,
+ struct timespec *ts2)
+{
+ unsigned int rate, sectors = bytes >> 9;
+ uint64_t tot = bytes * count;
+ struct timespec ts;
+
+ ts = timespec_sub(*ts2, *ts1);
+
+ rate = mmc_test_rate(tot, &ts);
+
+ printk(KERN_INFO "%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
+ "%lu.%09lu seconds (%u kB/s, %u KiB/s)\n",
+ mmc_hostname(test->card->host), count, sectors, count,
+ sectors >> 1, (sectors == 1 ? ".5" : ""),
+ (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
+ rate / 1000, rate / 1024);
+}
+
+/*
+ * Return the card size in sectors.
+ */
+static unsigned int mmc_test_capacity(struct mmc_card *card)
+{
+ if (!mmc_card_sd(card) && mmc_card_blockaddr(card))
+ return card->ext_csd.sectors;
+ else
+ return card->csd.capacity << (card->csd.read_blkbits - 9);
+}
+
/*******************************************************************/
/* Test preparation and cleanup */
/*******************************************************************/
return 0;
}
+#else
+
+static int mmc_test_no_highmem(struct mmc_test_card *test)
+{
+ printk(KERN_INFO "%s: Highmem not configured - test skipped\n",
+ mmc_hostname(test->card->host));
+ return 0;
+}
+
#endif /* CONFIG_HIGHMEM */
+/*
+ * Map sz bytes so that it can be transferred.
+ */
+static int mmc_test_area_map(struct mmc_test_card *test, unsigned long sz,
+ int max_scatter)
+{
+ struct mmc_test_area *t = &test->area;
+
+ t->blocks = sz >> 9;
+
+ if (max_scatter) {
+ return mmc_test_map_sg_max_scatter(t->mem, sz, t->sg,
+ t->max_segs, &t->sg_len);
+ } else {
+ return mmc_test_map_sg(t->mem, sz, t->sg, 1, t->max_segs,
+ &t->sg_len);
+ }
+}
+
+/*
+ * Transfer bytes mapped by mmc_test_area_map().
+ */
+static int mmc_test_area_transfer(struct mmc_test_card *test,
+ unsigned int dev_addr, int write)
+{
+ struct mmc_test_area *t = &test->area;
+
+ return mmc_test_simple_transfer(test, t->sg, t->sg_len, dev_addr,
+ t->blocks, 512, write);
+}
+
+/*
+ * Map and transfer bytes.
+ */
+static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz,
+ unsigned int dev_addr, int write, int max_scatter,
+ int timed)
+{
+ struct timespec ts1, ts2;
+ int ret;
+
+ ret = mmc_test_area_map(test, sz, max_scatter);
+ if (ret)
+ return ret;
+
+ if (timed)
+ getnstimeofday(&ts1);
+
+ ret = mmc_test_area_transfer(test, dev_addr, write);
+ if (ret)
+ return ret;
+
+ if (timed)
+ getnstimeofday(&ts2);
+
+ if (timed)
+ mmc_test_print_rate(test, sz, &ts1, &ts2);
+
+ return 0;
+}
+
+/*
+ * Write the test area entirely.
+ */
+static int mmc_test_area_fill(struct mmc_test_card *test)
+{
+ return mmc_test_area_io(test, test->area.max_sz, test->area.dev_addr,
+ 1, 0, 0);
+}
+
+/*
+ * Erase the test area entirely.
+ */
+static int mmc_test_area_erase(struct mmc_test_card *test)
+{
+ struct mmc_test_area *t = &test->area;
+
+ if (!mmc_can_erase(test->card))
+ return 0;
+
+ return mmc_erase(test->card, t->dev_addr, test->area.max_sz >> 9,
+ MMC_ERASE_ARG);
+}
+
+/*
+ * Cleanup struct mmc_test_area.
+ */
+static int mmc_test_area_cleanup(struct mmc_test_card *test)
+{
+ struct mmc_test_area *t = &test->area;
+
+ kfree(t->sg);
+ mmc_test_free_mem(t->mem);
+
+ return 0;
+}
+
+/*
+ * Initialize an area for testing large transfers. The size of the area is the
+ * preferred erase size which is a good size for optimal transfer speed. Note
+ * that is typically 4MiB for modern cards. The test area is set to the middle
+ * of the card because cards may have different charateristics at the front
+ * (for FAT file system optimization). Optionally, the area is erased (if the
+ * card supports it) which may improve write performance. Optionally, the area
+ * is filled with data for subsequent read tests.
+ */
+static int mmc_test_area_init(struct mmc_test_card *test, int erase, int fill)
+{
+ struct mmc_test_area *t = &test->area;
+ unsigned long min_sz = 64 * 1024;
+ int ret;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ if (test->card->pref_erase > TEST_AREA_MAX_SIZE >> 9)
+ t->max_sz = TEST_AREA_MAX_SIZE;
+ else
+ t->max_sz = (unsigned long)test->card->pref_erase << 9;
+ /*
+ * Try to allocate enough memory for the whole area. Less is OK
+ * because the same memory can be mapped into the scatterlist more than
+ * once.
+ */
+ t->mem = mmc_test_alloc_mem(min_sz, t->max_sz);
+ if (!t->mem)
+ return -ENOMEM;
+
+ t->max_segs = DIV_ROUND_UP(t->max_sz, PAGE_SIZE);
+ t->sg = kmalloc(sizeof(struct scatterlist) * t->max_segs, GFP_KERNEL);
+ if (!t->sg) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
+
+ t->dev_addr = mmc_test_capacity(test->card) / 2;
+ t->dev_addr -= t->dev_addr % (t->max_sz >> 9);
+
+ if (erase) {
+ ret = mmc_test_area_erase(test);
+ if (ret)
+ goto out_free;
+ }
+
+ if (fill) {
+ ret = mmc_test_area_fill(test);
+ if (ret)
+ goto out_free;
+ }
+
+ return 0;
+
+out_free:
+ mmc_test_area_cleanup(test);
+ return ret;
+}
+
+/*
+ * Prepare for large transfers. Do not erase the test area.
+ */
+static int mmc_test_area_prepare(struct mmc_test_card *test)
+{
+ return mmc_test_area_init(test, 0, 0);
+}
+
+/*
+ * Prepare for large transfers. Do erase the test area.
+ */
+static int mmc_test_area_prepare_erase(struct mmc_test_card *test)
+{
+ return mmc_test_area_init(test, 1, 0);
+}
+
+/*
+ * Prepare for large transfers. Erase and fill the test area.
+ */
+static int mmc_test_area_prepare_fill(struct mmc_test_card *test)
+{
+ return mmc_test_area_init(test, 1, 1);
+}
+
+/*
+ * Test best-case performance. Best-case performance is expected from
+ * a single large transfer.
+ *
+ * An additional option (max_scatter) allows the measurement of the same
+ * transfer but with no contiguous pages in the scatter list. This tests
+ * the efficiency of DMA to handle scattered pages.
+ */
+static int mmc_test_best_performance(struct mmc_test_card *test, int write,
+ int max_scatter)
+{
+ return mmc_test_area_io(test, test->area.max_sz, test->area.dev_addr,
+ write, max_scatter, 1);
+}
+
+/*
+ * Best-case read performance.
+ */
+static int mmc_test_best_read_performance(struct mmc_test_card *test)
+{
+ return mmc_test_best_performance(test, 0, 0);
+}
+
+/*
+ * Best-case write performance.
+ */
+static int mmc_test_best_write_performance(struct mmc_test_card *test)
+{
+ return mmc_test_best_performance(test, 1, 0);
+}
+
+/*
+ * Best-case read performance into scattered pages.
+ */
+static int mmc_test_best_read_perf_max_scatter(struct mmc_test_card *test)
+{
+ return mmc_test_best_performance(test, 0, 1);
+}
+
+/*
+ * Best-case write performance from scattered pages.
+ */
+static int mmc_test_best_write_perf_max_scatter(struct mmc_test_card *test)
+{
+ return mmc_test_best_performance(test, 1, 1);
+}
+
+/*
+ * Single read performance by transfer size.
+ */
+static int mmc_test_profile_read_perf(struct mmc_test_card *test)
+{
+ unsigned long sz;
+ unsigned int dev_addr;
+ int ret;
+
+ for (sz = 512; sz < test->area.max_sz; sz <<= 1) {
+ dev_addr = test->area.dev_addr + (sz >> 9);
+ ret = mmc_test_area_io(test, sz, dev_addr, 0, 0, 1);
+ if (ret)
+ return ret;
+ }
+ dev_addr = test->area.dev_addr;
+ return mmc_test_area_io(test, sz, dev_addr, 0, 0, 1);
+}
+
+/*
+ * Single write performance by transfer size.
+ */
+static int mmc_test_profile_write_perf(struct mmc_test_card *test)
+{
+ unsigned long sz;
+ unsigned int dev_addr;
+ int ret;
+
+ ret = mmc_test_area_erase(test);
+ if (ret)
+ return ret;
+ for (sz = 512; sz < test->area.max_sz; sz <<= 1) {
+ dev_addr = test->area.dev_addr + (sz >> 9);
+ ret = mmc_test_area_io(test, sz, dev_addr, 1, 0, 1);
+ if (ret)
+ return ret;
+ }
+ ret = mmc_test_area_erase(test);
+ if (ret)
+ return ret;
+ dev_addr = test->area.dev_addr;
+ return mmc_test_area_io(test, sz, dev_addr, 1, 0, 1);
+}
+
+/*
+ * Single trim performance by transfer size.
+ */
+static int mmc_test_profile_trim_perf(struct mmc_test_card *test)
+{
+ unsigned long sz;
+ unsigned int dev_addr;
+ struct timespec ts1, ts2;
+ int ret;
+
+ if (!mmc_can_trim(test->card))
+ return RESULT_UNSUP_CARD;
+
+ if (!mmc_can_erase(test->card))
+ return RESULT_UNSUP_HOST;
+
+ for (sz = 512; sz < test->area.max_sz; sz <<= 1) {
+ dev_addr = test->area.dev_addr + (sz >> 9);
+ getnstimeofday(&ts1);
+ ret = mmc_erase(test->card, dev_addr, sz >> 9, MMC_TRIM_ARG);
+ if (ret)
+ return ret;
+ getnstimeofday(&ts2);
+ mmc_test_print_rate(test, sz, &ts1, &ts2);
+ }
+ dev_addr = test->area.dev_addr;
+ getnstimeofday(&ts1);
+ ret = mmc_erase(test->card, dev_addr, sz >> 9, MMC_TRIM_ARG);
+ if (ret)
+ return ret;
+ getnstimeofday(&ts2);
+ mmc_test_print_rate(test, sz, &ts1, &ts2);
+ return 0;
+}
+
+/*
+ * Consecutive read performance by transfer size.
+ */
+static int mmc_test_profile_seq_read_perf(struct mmc_test_card *test)
+{
+ unsigned long sz;
+ unsigned int dev_addr, i, cnt;
+ struct timespec ts1, ts2;
+ int ret;
+
+ for (sz = 512; sz <= test->area.max_sz; sz <<= 1) {
+ cnt = test->area.max_sz / sz;
+ dev_addr = test->area.dev_addr;
+ getnstimeofday(&ts1);
+ for (i = 0; i < cnt; i++) {
+ ret = mmc_test_area_io(test, sz, dev_addr, 0, 0, 0);
+ if (ret)
+ return ret;
+ dev_addr += (sz >> 9);
+ }
+ getnstimeofday(&ts2);
+ mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2);
+ }
+ return 0;
+}
+
+/*
+ * Consecutive write performance by transfer size.
+ */
+static int mmc_test_profile_seq_write_perf(struct mmc_test_card *test)
+{
+ unsigned long sz;
+ unsigned int dev_addr, i, cnt;
+ struct timespec ts1, ts2;
+ int ret;
+
+ for (sz = 512; sz <= test->area.max_sz; sz <<= 1) {
+ ret = mmc_test_area_erase(test);
+ if (ret)
+ return ret;
+ cnt = test->area.max_sz / sz;
+ dev_addr = test->area.dev_addr;
+ getnstimeofday(&ts1);
+ for (i = 0; i < cnt; i++) {
+ ret = mmc_test_area_io(test, sz, dev_addr, 1, 0, 0);
+ if (ret)
+ return ret;
+ dev_addr += (sz >> 9);
+ }
+ getnstimeofday(&ts2);
+ mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2);
+ }
+ return 0;
+}
+
+/*
+ * Consecutive trim performance by transfer size.
+ */
+static int mmc_test_profile_seq_trim_perf(struct mmc_test_card *test)
+{
+ unsigned long sz;
+ unsigned int dev_addr, i, cnt;
+ struct timespec ts1, ts2;
+ int ret;
+
+ if (!mmc_can_trim(test->card))
+ return RESULT_UNSUP_CARD;
+
+ if (!mmc_can_erase(test->card))
+ return RESULT_UNSUP_HOST;
+
+ for (sz = 512; sz <= test->area.max_sz; sz <<= 1) {
+ ret = mmc_test_area_erase(test);
+ if (ret)
+ return ret;
+ ret = mmc_test_area_fill(test);
+ if (ret)
+ return ret;
+ cnt = test->area.max_sz / sz;
+ dev_addr = test->area.dev_addr;
+ getnstimeofday(&ts1);
+ for (i = 0; i < cnt; i++) {
+ ret = mmc_erase(test->card, dev_addr, sz >> 9,
+ MMC_TRIM_ARG);
+ if (ret)
+ return ret;
+ dev_addr += (sz >> 9);
+ }
+ getnstimeofday(&ts2);
+ mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2);
+ }
+ return 0;
+}
+
static const struct mmc_test_case mmc_test_cases[] = {
{
.name = "Basic write (no data verification)",
.cleanup = mmc_test_cleanup,
},
+#else
+
+ {
+ .name = "Highmem write",
+ .run = mmc_test_no_highmem,
+ },
+
+ {
+ .name = "Highmem read",
+ .run = mmc_test_no_highmem,
+ },
+
+ {
+ .name = "Multi-block highmem write",
+ .run = mmc_test_no_highmem,
+ },
+
+ {
+ .name = "Multi-block highmem read",
+ .run = mmc_test_no_highmem,
+ },
+
#endif /* CONFIG_HIGHMEM */
+ {
+ .name = "Best-case read performance",
+ .prepare = mmc_test_area_prepare_fill,
+ .run = mmc_test_best_read_performance,
+ .cleanup = mmc_test_area_cleanup,
+ },
+
+ {
+ .name = "Best-case write performance",
+ .prepare = mmc_test_area_prepare_erase,
+ .run = mmc_test_best_write_performance,
+ .cleanup = mmc_test_area_cleanup,
+ },
+
+ {
+ .name = "Best-case read performance into scattered pages",
+ .prepare = mmc_test_area_prepare_fill,
+ .run = mmc_test_best_read_perf_max_scatter,
+ .cleanup = mmc_test_area_cleanup,
+ },
+
+ {
+ .name = "Best-case write performance from scattered pages",
+ .prepare = mmc_test_area_prepare_erase,
+ .run = mmc_test_best_write_perf_max_scatter,
+ .cleanup = mmc_test_area_cleanup,
+ },
+
+ {
+ .name = "Single read performance by transfer size",
+ .prepare = mmc_test_area_prepare_fill,
+ .run = mmc_test_profile_read_perf,
+ .cleanup = mmc_test_area_cleanup,
+ },
+
+ {
+ .name = "Single write performance by transfer size",
+ .prepare = mmc_test_area_prepare,
+ .run = mmc_test_profile_write_perf,
+ .cleanup = mmc_test_area_cleanup,
+ },
+
+ {
+ .name = "Single trim performance by transfer size",
+ .prepare = mmc_test_area_prepare_fill,
+ .run = mmc_test_profile_trim_perf,
+ .cleanup = mmc_test_area_cleanup,
+ },
+
+ {
+ .name = "Consecutive read performance by transfer size",
+ .prepare = mmc_test_area_prepare_fill,
+ .run = mmc_test_profile_seq_read_perf,
+ .cleanup = mmc_test_area_cleanup,
+ },
+
+ {
+ .name = "Consecutive write performance by transfer size",
+ .prepare = mmc_test_area_prepare,
+ .run = mmc_test_profile_seq_write_perf,
+ .cleanup = mmc_test_area_cleanup,
+ },
+
+ {
+ .name = "Consecutive trim performance by transfer size",
+ .prepare = mmc_test_area_prepare,
+ .run = mmc_test_profile_seq_trim_perf,
+ .cleanup = mmc_test_area_cleanup,
+ },
+
};
static DEFINE_MUTEX(mmc_test_lock);
static int mmc_prep_request(struct request_queue *q, struct request *req)
{
/*
- * We only like normal block requests.
+ * We only like normal block requests and discards.
*/
- if (!blk_fs_request(req)) {
+ if (req->cmd_type != REQ_TYPE_FS && !(req->cmd_flags & REQ_DISCARD)) {
blk_dump_rq_flags(req, "MMC bad request");
return BLKPREP_KILL;
}
mq->req = NULL;
blk_queue_prep_rq(mq->queue, mmc_prep_request);
- blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN, NULL);
+ blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN);
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue);
+ if (mmc_can_erase(card)) {
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mq->queue);
+ mq->queue->limits.max_discard_sectors = UINT_MAX;
+ if (card->erased_byte == 0)
+ mq->queue->limits.discard_zeroes_data = 1;
+ if (!mmc_can_trim(card) && is_power_of_2(card->erase_size)) {
+ mq->queue->limits.discard_granularity =
+ card->erase_size << 9;
+ mq->queue->limits.discard_alignment =
+ card->erase_size << 9;
+ }
+ if (mmc_can_secure_erase_trim(card))
+ queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD,
+ mq->queue);
+ }
#ifdef CONFIG_MMC_BLOCK_BOUNCE
if (host->max_hw_segs == 1) {
return sprintf(buf, "SD\n");
case MMC_TYPE_SDIO:
return sprintf(buf, "SDIO\n");
+ case MMC_TYPE_SD_COMBO:
+ return sprintf(buf, "SDcombo\n");
default:
return -EFAULT;
}
case MMC_TYPE_SDIO:
type = "SDIO";
break;
+ case MMC_TYPE_SD_COMBO:
+ type = "SDcombo";
+ break;
default:
type = NULL;
}
case MMC_TYPE_SDIO:
type = "SDIO";
break;
+ case MMC_TYPE_SD_COMBO:
+ type = "SD-combo";
+ if (mmc_card_blockaddr(card))
+ type = "SDHC-combo";
default:
type = "?";
break;
EXPORT_SYMBOL(mmc_detect_change);
+void mmc_init_erase(struct mmc_card *card)
+{
+ unsigned int sz;
+
+ if (is_power_of_2(card->erase_size))
+ card->erase_shift = ffs(card->erase_size) - 1;
+ else
+ card->erase_shift = 0;
+
+ /*
+ * It is possible to erase an arbitrarily large area of an SD or MMC
+ * card. That is not desirable because it can take a long time
+ * (minutes) potentially delaying more important I/O, and also the
+ * timeout calculations become increasingly hugely over-estimated.
+ * Consequently, 'pref_erase' is defined as a guide to limit erases
+ * to that size and alignment.
+ *
+ * For SD cards that define Allocation Unit size, limit erases to one
+ * Allocation Unit at a time. For MMC cards that define High Capacity
+ * Erase Size, whether it is switched on or not, limit to that size.
+ * Otherwise just have a stab at a good value. For modern cards it
+ * will end up being 4MiB. Note that if the value is too small, it
+ * can end up taking longer to erase.
+ */
+ if (mmc_card_sd(card) && card->ssr.au) {
+ card->pref_erase = card->ssr.au;
+ card->erase_shift = ffs(card->ssr.au) - 1;
+ } else if (card->ext_csd.hc_erase_size) {
+ card->pref_erase = card->ext_csd.hc_erase_size;
+ } else {
+ sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11;
+ if (sz < 128)
+ card->pref_erase = 512 * 1024 / 512;
+ else if (sz < 512)
+ card->pref_erase = 1024 * 1024 / 512;
+ else if (sz < 1024)
+ card->pref_erase = 2 * 1024 * 1024 / 512;
+ else
+ card->pref_erase = 4 * 1024 * 1024 / 512;
+ if (card->pref_erase < card->erase_size)
+ card->pref_erase = card->erase_size;
+ else {
+ sz = card->pref_erase % card->erase_size;
+ if (sz)
+ card->pref_erase += card->erase_size - sz;
+ }
+ }
+}
+
+static void mmc_set_mmc_erase_timeout(struct mmc_card *card,
+ struct mmc_command *cmd,
+ unsigned int arg, unsigned int qty)
+{
+ unsigned int erase_timeout;
+
+ if (card->ext_csd.erase_group_def & 1) {
+ /* High Capacity Erase Group Size uses HC timeouts */
+ if (arg == MMC_TRIM_ARG)
+ erase_timeout = card->ext_csd.trim_timeout;
+ else
+ erase_timeout = card->ext_csd.hc_erase_timeout;
+ } else {
+ /* CSD Erase Group Size uses write timeout */
+ unsigned int mult = (10 << card->csd.r2w_factor);
+ unsigned int timeout_clks = card->csd.tacc_clks * mult;
+ unsigned int timeout_us;
+
+ /* Avoid overflow: e.g. tacc_ns=80000000 mult=1280 */
+ if (card->csd.tacc_ns < 1000000)
+ timeout_us = (card->csd.tacc_ns * mult) / 1000;
+ else
+ timeout_us = (card->csd.tacc_ns / 1000) * mult;
+
+ /*
+ * ios.clock is only a target. The real clock rate might be
+ * less but not that much less, so fudge it by multiplying by 2.
+ */
+ timeout_clks <<= 1;
+ timeout_us += (timeout_clks * 1000) /
+ (card->host->ios.clock / 1000);
+
+ erase_timeout = timeout_us / 1000;
+
+ /*
+ * Theoretically, the calculation could underflow so round up
+ * to 1ms in that case.
+ */
+ if (!erase_timeout)
+ erase_timeout = 1;
+ }
+
+ /* Multiplier for secure operations */
+ if (arg & MMC_SECURE_ARGS) {
+ if (arg == MMC_SECURE_ERASE_ARG)
+ erase_timeout *= card->ext_csd.sec_erase_mult;
+ else
+ erase_timeout *= card->ext_csd.sec_trim_mult;
+ }
+
+ erase_timeout *= qty;
+
+ /*
+ * Ensure at least a 1 second timeout for SPI as per
+ * 'mmc_set_data_timeout()'
+ */
+ if (mmc_host_is_spi(card->host) && erase_timeout < 1000)
+ erase_timeout = 1000;
+
+ cmd->erase_timeout = erase_timeout;
+}
+
+static void mmc_set_sd_erase_timeout(struct mmc_card *card,
+ struct mmc_command *cmd, unsigned int arg,
+ unsigned int qty)
+{
+ if (card->ssr.erase_timeout) {
+ /* Erase timeout specified in SD Status Register (SSR) */
+ cmd->erase_timeout = card->ssr.erase_timeout * qty +
+ card->ssr.erase_offset;
+ } else {
+ /*
+ * Erase timeout not specified in SD Status Register (SSR) so
+ * use 250ms per write block.
+ */
+ cmd->erase_timeout = 250 * qty;
+ }
+
+ /* Must not be less than 1 second */
+ if (cmd->erase_timeout < 1000)
+ cmd->erase_timeout = 1000;
+}
+
+static void mmc_set_erase_timeout(struct mmc_card *card,
+ struct mmc_command *cmd, unsigned int arg,
+ unsigned int qty)
+{
+ if (mmc_card_sd(card))
+ mmc_set_sd_erase_timeout(card, cmd, arg, qty);
+ else
+ mmc_set_mmc_erase_timeout(card, cmd, arg, qty);
+}
+
+static int mmc_do_erase(struct mmc_card *card, unsigned int from,
+ unsigned int to, unsigned int arg)
+{
+ struct mmc_command cmd;
+ unsigned int qty = 0;
+ int err;
+
+ /*
+ * qty is used to calculate the erase timeout which depends on how many
+ * erase groups (or allocation units in SD terminology) are affected.
+ * We count erasing part of an erase group as one erase group.
+ * For SD, the allocation units are always a power of 2. For MMC, the
+ * erase group size is almost certainly also power of 2, but it does not
+ * seem to insist on that in the JEDEC standard, so we fall back to
+ * division in that case. SD may not specify an allocation unit size,
+ * in which case the timeout is based on the number of write blocks.
+ *
+ * Note that the timeout for secure trim 2 will only be correct if the
+ * number of erase groups specified is the same as the total of all
+ * preceding secure trim 1 commands. Since the power may have been
+ * lost since the secure trim 1 commands occurred, it is generally
+ * impossible to calculate the secure trim 2 timeout correctly.
+ */
+ if (card->erase_shift)
+ qty += ((to >> card->erase_shift) -
+ (from >> card->erase_shift)) + 1;
+ else if (mmc_card_sd(card))
+ qty += to - from + 1;
+ else
+ qty += ((to / card->erase_size) -
+ (from / card->erase_size)) + 1;
+
+ if (!mmc_card_blockaddr(card)) {
+ from <<= 9;
+ to <<= 9;
+ }
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ if (mmc_card_sd(card))
+ cmd.opcode = SD_ERASE_WR_BLK_START;
+ else
+ cmd.opcode = MMC_ERASE_GROUP_START;
+ cmd.arg = from;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err) {
+ printk(KERN_ERR "mmc_erase: group start error %d, "
+ "status %#x\n", err, cmd.resp[0]);
+ err = -EINVAL;
+ goto out;
+ }
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ if (mmc_card_sd(card))
+ cmd.opcode = SD_ERASE_WR_BLK_END;
+ else
+ cmd.opcode = MMC_ERASE_GROUP_END;
+ cmd.arg = to;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err) {
+ printk(KERN_ERR "mmc_erase: group end error %d, status %#x\n",
+ err, cmd.resp[0]);
+ err = -EINVAL;
+ goto out;
+ }
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ cmd.opcode = MMC_ERASE;
+ cmd.arg = arg;
+ cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+ mmc_set_erase_timeout(card, &cmd, arg, qty);
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err) {
+ printk(KERN_ERR "mmc_erase: erase error %d, status %#x\n",
+ err, cmd.resp[0]);
+ err = -EIO;
+ goto out;
+ }
+
+ if (mmc_host_is_spi(card->host))
+ goto out;
+
+ do {
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ cmd.opcode = MMC_SEND_STATUS;
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ /* Do not retry else we can't see errors */
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err || (cmd.resp[0] & 0xFDF92000)) {
+ printk(KERN_ERR "error %d requesting status %#x\n",
+ err, cmd.resp[0]);
+ err = -EIO;
+ goto out;
+ }
+ } while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
+ R1_CURRENT_STATE(cmd.resp[0]) == 7);
+out:
+ return err;
+}
+
+/**
+ * mmc_erase - erase sectors.
+ * @card: card to erase
+ * @from: first sector to erase
+ * @nr: number of sectors to erase
+ * @arg: erase command argument (SD supports only %MMC_ERASE_ARG)
+ *
+ * Caller must claim host before calling this function.
+ */
+int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
+ unsigned int arg)
+{
+ unsigned int rem, to = from + nr;
+
+ if (!(card->host->caps & MMC_CAP_ERASE) ||
+ !(card->csd.cmdclass & CCC_ERASE))
+ return -EOPNOTSUPP;
+
+ if (!card->erase_size)
+ return -EOPNOTSUPP;
+
+ if (mmc_card_sd(card) && arg != MMC_ERASE_ARG)
+ return -EOPNOTSUPP;
+
+ if ((arg & MMC_SECURE_ARGS) &&
+ !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN))
+ return -EOPNOTSUPP;
+
+ if ((arg & MMC_TRIM_ARGS) &&
+ !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN))
+ return -EOPNOTSUPP;
+
+ if (arg == MMC_SECURE_ERASE_ARG) {
+ if (from % card->erase_size || nr % card->erase_size)
+ return -EINVAL;
+ }
+
+ if (arg == MMC_ERASE_ARG) {
+ rem = from % card->erase_size;
+ if (rem) {
+ rem = card->erase_size - rem;
+ from += rem;
+ if (nr > rem)
+ nr -= rem;
+ else
+ return 0;
+ }
+ rem = nr % card->erase_size;
+ if (rem)
+ nr -= rem;
+ }
+
+ if (nr == 0)
+ return 0;
+
+ to = from + nr;
+
+ if (to <= from)
+ return -EINVAL;
+
+ /* 'from' and 'to' are inclusive */
+ to -= 1;
+
+ return mmc_do_erase(card, from, to, arg);
+}
+EXPORT_SYMBOL(mmc_erase);
+
+int mmc_can_erase(struct mmc_card *card)
+{
+ if ((card->host->caps & MMC_CAP_ERASE) &&
+ (card->csd.cmdclass & CCC_ERASE) && card->erase_size)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_can_erase);
+
+int mmc_can_trim(struct mmc_card *card)
+{
+ if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_can_trim);
+
+int mmc_can_secure_erase_trim(struct mmc_card *card)
+{
+ if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_can_secure_erase_trim);
+
+int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
+ unsigned int nr)
+{
+ if (!card->erase_size)
+ return 0;
+ if (from % card->erase_size || nr % card->erase_size)
+ return 0;
+ return 1;
+}
+EXPORT_SYMBOL(mmc_erase_group_aligned);
void mmc_rescan(struct work_struct *work)
{
container_of(work, struct mmc_host, detect.work);
u32 ocr;
int err;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->rescan_disable) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
mmc_bus_get(host);
*/
err = mmc_send_io_op_cond(host, 0, &ocr);
if (!err) {
- if (mmc_attach_sdio(host, ocr))
- mmc_power_off(host);
+ if (mmc_attach_sdio(host, ocr)) {
+ mmc_claim_host(host);
+ /* try SDMEM (but not MMC) even if SDIO is broken */
+ if (mmc_send_app_op_cond(host, 0, &ocr))
+ goto out_fail;
+
+ if (mmc_attach_sd(host, ocr))
+ mmc_power_off(host);
+ }
goto out;
}
goto out;
}
+out_fail:
mmc_release_host(host);
mmc_power_off(host);
if (host->bus_ops && !host->bus_dead) {
if (host->bus_ops->suspend)
err = host->bus_ops->suspend(host);
- if (err == -ENOSYS || !host->bus_ops->resume) {
- /*
- * We simply "remove" the card in this case.
- * It will be redetected on resume.
- */
- if (host->bus_ops->remove)
- host->bus_ops->remove(host);
- mmc_claim_host(host);
- mmc_detach_bus(host);
- mmc_release_host(host);
- host->pm_flags = 0;
- err = 0;
- }
}
mmc_bus_put(host);
printk(KERN_WARNING "%s: error %d during resume "
"(card was removed?)\n",
mmc_hostname(host), err);
- if (host->bus_ops->remove)
- host->bus_ops->remove(host);
- mmc_claim_host(host);
- mmc_detach_bus(host);
- mmc_release_host(host);
- /* no need to bother upper layers */
err = 0;
}
}
mmc_bus_put(host);
- /*
- * We add a slight delay here so that resume can progress
- * in parallel.
- */
- mmc_detect_change(host, 1);
-
return err;
}
-
EXPORT_SYMBOL(mmc_resume_host);
+/* Do the card removal on suspend if card is assumed removeable
+ * Do that in pm notifier while userspace isn't yet frozen, so we will be able
+ to sync the card.
+*/
+int mmc_pm_notify(struct notifier_block *notify_block,
+ unsigned long mode, void *unused)
+{
+ struct mmc_host *host = container_of(
+ notify_block, struct mmc_host, pm_notify);
+ unsigned long flags;
+
+
+ switch (mode) {
+ case PM_HIBERNATION_PREPARE:
+ case PM_SUSPEND_PREPARE:
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->rescan_disable = 1;
+ spin_unlock_irqrestore(&host->lock, flags);
+ cancel_delayed_work_sync(&host->detect);
+
+ if (!host->bus_ops || host->bus_ops->suspend)
+ break;
+
+ mmc_claim_host(host);
+
+ if (host->bus_ops->remove)
+ host->bus_ops->remove(host);
+
+ mmc_detach_bus(host);
+ mmc_release_host(host);
+ host->pm_flags = 0;
+ break;
+
+ case PM_POST_SUSPEND:
+ case PM_POST_HIBERNATION:
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->rescan_disable = 0;
+ spin_unlock_irqrestore(&host->lock, flags);
+ mmc_detect_change(host, 0);
+
+ }
+
+ return 0;
+}
#endif
static int __init mmc_init(void)
void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops);
void mmc_detach_bus(struct mmc_host *host);
+void mmc_init_erase(struct mmc_card *card);
+
void mmc_set_chip_select(struct mmc_host *host, int mode);
void mmc_set_clock(struct mmc_host *host, unsigned int hz);
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
#include <linux/pagemap.h>
#include <linux/leds.h>
#include <linux/slab.h>
+#include <linux/suspend.h>
#include <linux/mmc/host.h>
init_waitqueue_head(&host->wq);
INIT_DELAYED_WORK(&host->detect, mmc_rescan);
INIT_DELAYED_WORK_DEFERRABLE(&host->disable, mmc_host_deeper_disable);
+#ifdef CONFIG_PM
+ host->pm_notify.notifier_call = mmc_pm_notify;
+#endif
/*
* By default, hosts do not support SGIO or large requests.
#endif
mmc_start_host(host);
+ register_pm_notifier(&host->pm_notify);
return 0;
}
*/
void mmc_remove_host(struct mmc_host *host)
{
+ unregister_pm_notifier(&host->pm_notify);
mmc_stop_host(host);
#ifdef CONFIG_DEBUG_FS
return 0;
}
+static void mmc_set_erase_size(struct mmc_card *card)
+{
+ if (card->ext_csd.erase_group_def & 1)
+ card->erase_size = card->ext_csd.hc_erase_size;
+ else
+ card->erase_size = card->csd.erase_size;
+
+ mmc_init_erase(card);
+}
+
/*
* Given a 128-bit response, decode to our card CSD structure.
*/
static int mmc_decode_csd(struct mmc_card *card)
{
struct mmc_csd *csd = &card->csd;
- unsigned int e, m, csd_struct;
+ unsigned int e, m, a, b;
u32 *resp = card->raw_csd;
/*
* We only understand CSD structure v1.1 and v1.2.
* v1.2 has extra information in bits 15, 11 and 10.
+ * We also support eMMC v4.4 & v4.41.
*/
- csd_struct = UNSTUFF_BITS(resp, 126, 2);
- if (csd_struct != 1 && csd_struct != 2) {
+ csd->structure = UNSTUFF_BITS(resp, 126, 2);
+ if (csd->structure == 0) {
printk(KERN_ERR "%s: unrecognised CSD structure version %d\n",
- mmc_hostname(card->host), csd_struct);
+ mmc_hostname(card->host), csd->structure);
return -EINVAL;
}
csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
+ if (csd->write_blkbits >= 9) {
+ a = UNSTUFF_BITS(resp, 42, 5);
+ b = UNSTUFF_BITS(resp, 37, 5);
+ csd->erase_size = (a + 1) * (b + 1);
+ csd->erase_size <<= csd->write_blkbits - 9;
+ }
+
return 0;
}
goto out;
}
+ /* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */
+ if (card->csd.structure == 3) {
+ int ext_csd_struct = ext_csd[EXT_CSD_STRUCTURE];
+ if (ext_csd_struct > 2) {
+ printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
+ "version %d\n", mmc_hostname(card->host),
+ ext_csd_struct);
+ err = -EINVAL;
+ goto out;
+ }
+ }
+
card->ext_csd.rev = ext_csd[EXT_CSD_REV];
if (card->ext_csd.rev > 5) {
- printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
- "version %d\n", mmc_hostname(card->host),
- card->ext_csd.rev);
+ printk(KERN_ERR "%s: unrecognised EXT_CSD revision %d\n",
+ mmc_hostname(card->host), card->ext_csd.rev);
err = -EINVAL;
goto out;
}
ext_csd[EXT_CSD_SEC_CNT + 1] << 8 |
ext_csd[EXT_CSD_SEC_CNT + 2] << 16 |
ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
- if (card->ext_csd.sectors)
+
+ /* Cards with density > 2GiB are sector addressed */
+ if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512)
mmc_card_set_blockaddr(card);
}
if (sa_shift > 0 && sa_shift <= 0x17)
card->ext_csd.sa_timeout =
1 << ext_csd[EXT_CSD_S_A_TIMEOUT];
+ card->ext_csd.erase_group_def =
+ ext_csd[EXT_CSD_ERASE_GROUP_DEF];
+ card->ext_csd.hc_erase_timeout = 300 *
+ ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
+ card->ext_csd.hc_erase_size =
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] << 10;
}
+ if (card->ext_csd.rev >= 4) {
+ card->ext_csd.sec_trim_mult =
+ ext_csd[EXT_CSD_SEC_TRIM_MULT];
+ card->ext_csd.sec_erase_mult =
+ ext_csd[EXT_CSD_SEC_ERASE_MULT];
+ card->ext_csd.sec_feature_support =
+ ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
+ card->ext_csd.trim_timeout = 300 *
+ ext_csd[EXT_CSD_TRIM_MULT];
+ }
+
+ if (ext_csd[EXT_CSD_ERASED_MEM_CONT])
+ card->erased_byte = 0xFF;
+ else
+ card->erased_byte = 0x0;
+
out:
kfree(ext_csd);
MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
card->raw_csd[2], card->raw_csd[3]);
MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
+MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9);
+MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9);
MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev);
MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
&dev_attr_cid.attr,
&dev_attr_csd.attr,
&dev_attr_date.attr,
+ &dev_attr_erase_size.attr,
+ &dev_attr_preferred_erase_size.attr,
&dev_attr_fwrev.attr,
&dev_attr_hwrev.attr,
&dev_attr_manfid.attr,
err = mmc_read_ext_csd(card);
if (err)
goto free_card;
+ /* Erase size depends on CSD and Extended CSD */
+ mmc_set_erase_size(card);
}
/*
/*
* Given the decoded CSD structure, decode the raw CID to our CID structure.
*/
-static void mmc_decode_cid(struct mmc_card *card)
+void mmc_decode_cid(struct mmc_card *card)
{
u32 *resp = card->raw_cid;
csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
+
+ if (UNSTUFF_BITS(resp, 46, 1)) {
+ csd->erase_size = 1;
+ } else if (csd->write_blkbits >= 9) {
+ csd->erase_size = UNSTUFF_BITS(resp, 39, 7) + 1;
+ csd->erase_size <<= csd->write_blkbits - 9;
+ }
break;
case 1:
/*
csd->r2w_factor = 4; /* Unused */
csd->write_blkbits = 9;
csd->write_partial = 0;
+ csd->erase_size = 1;
break;
default:
printk(KERN_ERR "%s: unrecognised CSD structure version %d\n",
return -EINVAL;
}
+ card->erase_size = csd->erase_size;
+
return 0;
}
scr->sda_vsn = UNSTUFF_BITS(resp, 56, 4);
scr->bus_widths = UNSTUFF_BITS(resp, 48, 4);
+ if (UNSTUFF_BITS(resp, 55, 1))
+ card->erased_byte = 0xFF;
+ else
+ card->erased_byte = 0x0;
+
return 0;
}
+/*
+ * Fetch and process SD Status register.
+ */
+static int mmc_read_ssr(struct mmc_card *card)
+{
+ unsigned int au, es, et, eo;
+ int err, i;
+ u32 *ssr;
+
+ if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
+ printk(KERN_WARNING "%s: card lacks mandatory SD Status "
+ "function.\n", mmc_hostname(card->host));
+ return 0;
+ }
+
+ ssr = kmalloc(64, GFP_KERNEL);
+ if (!ssr)
+ return -ENOMEM;
+
+ err = mmc_app_sd_status(card, ssr);
+ if (err) {
+ printk(KERN_WARNING "%s: problem reading SD Status "
+ "register.\n", mmc_hostname(card->host));
+ err = 0;
+ goto out;
+ }
+
+ for (i = 0; i < 16; i++)
+ ssr[i] = be32_to_cpu(ssr[i]);
+
+ /*
+ * UNSTUFF_BITS only works with four u32s so we have to offset the
+ * bitfield positions accordingly.
+ */
+ au = UNSTUFF_BITS(ssr, 428 - 384, 4);
+ if (au > 0 || au <= 9) {
+ card->ssr.au = 1 << (au + 4);
+ es = UNSTUFF_BITS(ssr, 408 - 384, 16);
+ et = UNSTUFF_BITS(ssr, 402 - 384, 6);
+ eo = UNSTUFF_BITS(ssr, 400 - 384, 2);
+ if (es && et) {
+ card->ssr.erase_timeout = (et * 1000) / es;
+ card->ssr.erase_offset = eo * 1000;
+ }
+ } else {
+ printk(KERN_WARNING "%s: SD Status: Invalid Allocation Unit "
+ "size.\n", mmc_hostname(card->host));
+ }
+out:
+ kfree(ssr);
+ return err;
+}
+
/*
* Fetches and decodes switch information
*/
/*
* Test if the card supports high-speed mode and, if so, switch to it.
*/
-static int mmc_switch_hs(struct mmc_card *card)
+int mmc_sd_switch_hs(struct mmc_card *card)
{
int err;
u8 *status;
printk(KERN_WARNING "%s: Problem switching card "
"into high-speed mode!\n",
mmc_hostname(card->host));
+ err = 0;
} else {
- mmc_card_set_highspeed(card);
- mmc_set_timing(card->host, MMC_TIMING_SD_HS);
+ err = 1;
}
out:
card->raw_csd[2], card->raw_csd[3]);
MMC_DEV_ATTR(scr, "%08x%08x\n", card->raw_scr[0], card->raw_scr[1]);
MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
+MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9);
+MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9);
MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev);
MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
&dev_attr_csd.attr,
&dev_attr_scr.attr,
&dev_attr_date.attr,
+ &dev_attr_erase_size.attr,
+ &dev_attr_preferred_erase_size.attr,
&dev_attr_fwrev.attr,
&dev_attr_hwrev.attr,
&dev_attr_manfid.attr,
NULL,
};
-static struct device_type sd_type = {
+struct device_type sd_type = {
.groups = sd_attr_groups,
};
/*
- * Handle the detection and initialisation of a card.
- *
- * In the case of a resume, "oldcard" will contain the card
- * we're trying to reinitialise.
+ * Fetch CID from card.
*/
-static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
- struct mmc_card *oldcard)
+int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid)
{
- struct mmc_card *card;
int err;
- u32 cid[4];
- unsigned int max_dtr;
-
- BUG_ON(!host);
- WARN_ON(!host->claimed);
/*
* Since we're changing the OCR value, we seem to
err = mmc_send_app_op_cond(host, ocr, NULL);
if (err)
- goto err;
+ return err;
- /*
- * Fetch CID from card.
- */
if (mmc_host_is_spi(host))
err = mmc_send_cid(host, cid);
else
err = mmc_all_send_cid(host, cid);
- if (err)
- goto err;
- if (oldcard) {
- if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) {
- err = -ENOENT;
- goto err;
- }
-
- card = oldcard;
- } else {
- /*
- * Allocate card structure.
- */
- card = mmc_alloc_card(host, &sd_type);
- if (IS_ERR(card)) {
- err = PTR_ERR(card);
- goto err;
- }
+ return err;
+}
- card->type = MMC_TYPE_SD;
- memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
- }
+int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card)
+{
+ int err;
/*
- * For native busses: get card RCA and quit open drain mode.
+ * Fetch CSD from card.
*/
- if (!mmc_host_is_spi(host)) {
- err = mmc_send_relative_addr(host, &card->rca);
- if (err)
- goto free_card;
+ err = mmc_send_csd(card, card->raw_csd);
+ if (err)
+ return err;
- mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
- }
+ err = mmc_decode_csd(card);
+ if (err)
+ return err;
- if (!oldcard) {
+ return 0;
+}
+
+int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
+ bool reinit)
+{
+ int err;
+
+ if (!reinit) {
/*
- * Fetch CSD from card.
+ * Fetch SCR from card.
*/
- err = mmc_send_csd(card, card->raw_csd);
- if (err)
- goto free_card;
-
- err = mmc_decode_csd(card);
+ err = mmc_app_send_scr(card, card->raw_scr);
if (err)
- goto free_card;
-
- mmc_decode_cid(card);
- }
+ return err;
- /*
- * Select card, as all following commands rely on that.
- */
- if (!mmc_host_is_spi(host)) {
- err = mmc_select_card(card);
+ err = mmc_decode_scr(card);
if (err)
- goto free_card;
- }
+ return err;
- if (!oldcard) {
/*
- * Fetch SCR from card.
+ * Fetch and process SD Status register.
*/
- err = mmc_app_send_scr(card, card->raw_scr);
+ err = mmc_read_ssr(card);
if (err)
- goto free_card;
+ return err;
- err = mmc_decode_scr(card);
- if (err < 0)
- goto free_card;
+ /* Erase init depends on CSD and SSR */
+ mmc_init_erase(card);
/*
* Fetch switch information from card.
*/
err = mmc_read_switch(card);
if (err)
- goto free_card;
+ return err;
}
/*
if (mmc_host_is_spi(host)) {
err = mmc_spi_set_crc(host, use_spi_crc);
if (err)
- goto free_card;
+ return err;
}
/*
- * Attempt to change to high-speed (if supported)
+ * Check if read-only switch is active.
*/
- err = mmc_switch_hs(card);
- if (err)
- goto free_card;
+ if (!reinit) {
+ int ro = -1;
- /*
- * Compute bus speed.
- */
- max_dtr = (unsigned int)-1;
+ if (host->ops->get_ro)
+ ro = host->ops->get_ro(host);
+
+ if (ro < 0) {
+ printk(KERN_WARNING "%s: host does not "
+ "support reading read-only "
+ "switch. assuming write-enable.\n",
+ mmc_hostname(host));
+ } else if (ro > 0) {
+ mmc_card_set_readonly(card);
+ }
+ }
+
+ return 0;
+}
+
+unsigned mmc_sd_get_max_clock(struct mmc_card *card)
+{
+ unsigned max_dtr = (unsigned int)-1;
if (mmc_card_highspeed(card)) {
if (max_dtr > card->sw_caps.hs_max_dtr)
max_dtr = card->csd.max_dtr;
}
- mmc_set_clock(host, max_dtr);
+ return max_dtr;
+}
+
+void mmc_sd_go_highspeed(struct mmc_card *card)
+{
+ mmc_card_set_highspeed(card);
+ mmc_set_timing(card->host, MMC_TIMING_SD_HS);
+}
+
+/*
+ * Handle the detection and initialisation of a card.
+ *
+ * In the case of a resume, "oldcard" will contain the card
+ * we're trying to reinitialise.
+ */
+static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
+ struct mmc_card *oldcard)
+{
+ struct mmc_card *card;
+ int err;
+ u32 cid[4];
+
+ BUG_ON(!host);
+ WARN_ON(!host->claimed);
+
+ err = mmc_sd_get_cid(host, ocr, cid);
+ if (err)
+ return err;
+
+ if (oldcard) {
+ if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0)
+ return -ENOENT;
+
+ card = oldcard;
+ } else {
+ /*
+ * Allocate card structure.
+ */
+ card = mmc_alloc_card(host, &sd_type);
+ if (IS_ERR(card))
+ return PTR_ERR(card);
+
+ card->type = MMC_TYPE_SD;
+ memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
+ }
+
+ /*
+ * For native busses: get card RCA and quit open drain mode.
+ */
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_send_relative_addr(host, &card->rca);
+ if (err)
+ return err;
+
+ mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+ }
+
+ if (!oldcard) {
+ err = mmc_sd_get_csd(host, card);
+ if (err)
+ return err;
+
+ mmc_decode_cid(card);
+ }
+
+ /*
+ * Select card, as all following commands rely on that.
+ */
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_select_card(card);
+ if (err)
+ return err;
+ }
+
+ err = mmc_sd_setup_card(host, card, oldcard != NULL);
+ if (err)
+ goto free_card;
+
+ /*
+ * Attempt to change to high-speed (if supported)
+ */
+ err = mmc_sd_switch_hs(card);
+ if (err > 0)
+ mmc_sd_go_highspeed(card);
+ else if (err)
+ goto free_card;
+
+ /*
+ * Set bus speed.
+ */
+ mmc_set_clock(host, mmc_sd_get_max_clock(card));
/*
* Switch to wider bus (if supported).
mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
}
- /*
- * Check if read-only switch is active.
- */
- if (!oldcard) {
- if (!host->ops->get_ro || host->ops->get_ro(host) < 0) {
- printk(KERN_WARNING "%s: host does not "
- "support reading read-only "
- "switch. assuming write-enable.\n",
- mmc_hostname(host));
- } else {
- if (host->ops->get_ro(host) > 0)
- mmc_card_set_readonly(card);
- }
- }
-
- if (!oldcard)
- host->card = card;
-
+ host->card = card;
return 0;
free_card:
if (!oldcard)
mmc_remove_card(card);
-err:
return err;
}
--- /dev/null
+#ifndef _MMC_CORE_SD_H
+#define _MMC_CORE_SD_H
+
+#include <linux/mmc/card.h>
+
+extern struct device_type sd_type;
+
+int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid);
+int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card);
+void mmc_decode_cid(struct mmc_card *card);
+int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
+ bool reinit);
+unsigned mmc_sd_get_max_clock(struct mmc_card *card);
+int mmc_sd_switch_hs(struct mmc_card *card);
+void mmc_sd_go_highspeed(struct mmc_card *card);
+
+#endif
return 0;
}
+int mmc_app_sd_status(struct mmc_card *card, void *ssr)
+{
+ int err;
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_data data;
+ struct scatterlist sg;
+
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+ BUG_ON(!ssr);
+
+ /* NOTE: caller guarantees ssr is heap-allocated */
+
+ err = mmc_app_cmd(card->host, card);
+ if (err)
+ return err;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ memset(&data, 0, sizeof(struct mmc_data));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ cmd.opcode = SD_APP_SD_STATUS;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = 64;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+
+ sg_init_one(&sg, ssr, 64);
+
+ mmc_set_data_timeout(&data, card);
+
+ mmc_wait_for_req(card->host, &mrq);
+
+ if (cmd.error)
+ return cmd.error;
+ if (data.error)
+ return data.error;
+
+ return 0;
+}
int mmc_app_send_scr(struct mmc_card *card, u32 *scr);
int mmc_sd_switch(struct mmc_card *card, int mode, int group,
u8 value, u8 *resp);
+int mmc_app_sd_status(struct mmc_card *card, void *ssr);
#endif
#include "core.h"
#include "bus.h"
+#include "sd.h"
#include "sdio_bus.h"
#include "mmc_ops.h"
#include "sd_ops.h"
func->num = fn;
- ret = sdio_read_fbr(func);
- if (ret)
- goto fail;
+ if (!(card->quirks & MMC_QUIRK_NONSTD_SDIO)) {
+ ret = sdio_read_fbr(func);
+ if (ret)
+ goto fail;
- ret = sdio_read_func_cis(func);
- if (ret)
- goto fail;
+ ret = sdio_read_func_cis(func);
+ if (ret)
+ goto fail;
+ } else {
+ func->vendor = func->card->cis.vendor;
+ func->device = func->card->cis.device;
+ func->max_blksize = func->card->cis.blksize;
+ }
card->sdio_func[fn - 1] = func;
if (ret)
return ret;
- mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
-
- return 0;
+ return 1;
}
/*
return 0;
}
+
+static int sdio_enable_4bit_bus(struct mmc_card *card)
+{
+ int err;
+
+ if (card->type == MMC_TYPE_SDIO)
+ return sdio_enable_wide(card);
+
+ if ((card->host->caps & MMC_CAP_4_BIT_DATA) &&
+ (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
+ err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
+ if (err)
+ return err;
+ } else
+ return 0;
+
+ err = sdio_enable_wide(card);
+ if (err <= 0)
+ mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1);
+
+ return err;
+}
+
+
/*
* Test if the card supports high-speed mode and, if so, switch to it.
*/
-static int sdio_enable_hs(struct mmc_card *card)
+static int mmc_sdio_switch_hs(struct mmc_card *card, int enable)
{
int ret;
u8 speed;
if (ret)
return ret;
- speed |= SDIO_SPEED_EHS;
+ if (enable)
+ speed |= SDIO_SPEED_EHS;
+ else
+ speed &= ~SDIO_SPEED_EHS;
ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
if (ret)
return ret;
- mmc_card_set_highspeed(card);
- mmc_set_timing(card->host, MMC_TIMING_SD_HS);
+ return 1;
+}
- return 0;
+/*
+ * Enable SDIO/combo card's high-speed mode. Return 0/1 if [not]supported.
+ */
+static int sdio_enable_hs(struct mmc_card *card)
+{
+ int ret;
+
+ ret = mmc_sdio_switch_hs(card, true);
+ if (ret <= 0 || card->type == MMC_TYPE_SDIO)
+ return ret;
+
+ ret = mmc_sd_switch_hs(card);
+ if (ret <= 0)
+ mmc_sdio_switch_hs(card, false);
+
+ return ret;
+}
+
+static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
+{
+ unsigned max_dtr;
+
+ if (mmc_card_highspeed(card)) {
+ /*
+ * The SDIO specification doesn't mention how
+ * the CIS transfer speed register relates to
+ * high-speed, but it seems that 50 MHz is
+ * mandatory.
+ */
+ max_dtr = 50000000;
+ } else {
+ max_dtr = card->cis.max_dtr;
+ }
+
+ if (card->type == MMC_TYPE_SD_COMBO)
+ max_dtr = min(max_dtr, mmc_sd_get_max_clock(card));
+
+ return max_dtr;
}
/*
goto err;
}
- card->type = MMC_TYPE_SDIO;
+ err = mmc_sd_get_cid(host, host->ocr & ocr, card->raw_cid);
+
+ if (!err) {
+ card->type = MMC_TYPE_SD_COMBO;
+
+ if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO ||
+ memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) {
+ mmc_remove_card(card);
+ return -ENOENT;
+ }
+ } else {
+ card->type = MMC_TYPE_SDIO;
+
+ if (oldcard && oldcard->type != MMC_TYPE_SDIO) {
+ mmc_remove_card(card);
+ return -ENOENT;
+ }
+ }
/*
* Call the optional HC's init_card function to handle quirks.
mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
}
+ /*
+ * Read CSD, before selecting the card
+ */
+ if (!oldcard && card->type == MMC_TYPE_SD_COMBO) {
+ err = mmc_sd_get_csd(host, card);
+ if (err)
+ return err;
+
+ mmc_decode_cid(card);
+ }
+
/*
* Select card, as all following commands rely on that.
*/
goto remove;
}
+ if (card->quirks & MMC_QUIRK_NONSTD_SDIO) {
+ /*
+ * This is non-standard SDIO device, meaning it doesn't
+ * have any CIA (Common I/O area) registers present.
+ * It's host's responsibility to fill cccr and cis
+ * structures in init_card().
+ */
+ mmc_set_clock(host, card->cis.max_dtr);
+
+ if (card->cccr.high_speed) {
+ mmc_card_set_highspeed(card);
+ mmc_set_timing(card->host, MMC_TIMING_SD_HS);
+ }
+
+ goto finish;
+ }
+
/*
* Read the common registers.
*/
int same = (card->cis.vendor == oldcard->cis.vendor &&
card->cis.device == oldcard->cis.device);
mmc_remove_card(card);
- if (!same) {
- err = -ENOENT;
- goto err;
- }
+ if (!same)
+ return -ENOENT;
+
card = oldcard;
return 0;
}
+ if (card->type == MMC_TYPE_SD_COMBO) {
+ err = mmc_sd_setup_card(host, card, oldcard != NULL);
+ /* handle as SDIO-only card if memory init failed */
+ if (err) {
+ mmc_go_idle(host);
+ if (mmc_host_is_spi(host))
+ /* should not fail, as it worked previously */
+ mmc_spi_set_crc(host, use_spi_crc);
+ card->type = MMC_TYPE_SDIO;
+ } else
+ card->dev.type = &sd_type;
+ }
+
+ /*
+ * If needed, disconnect card detection pull-up resistor.
+ */
+ err = sdio_disable_cd(card);
+ if (err)
+ goto remove;
+
/*
* Switch to high-speed (if supported).
*/
err = sdio_enable_hs(card);
- if (err)
+ if (err > 0)
+ mmc_sd_go_highspeed(card);
+ else if (err)
goto remove;
/*
* Change to the card's maximum speed.
*/
- if (mmc_card_highspeed(card)) {
- /*
- * The SDIO specification doesn't mention how
- * the CIS transfer speed register relates to
- * high-speed, but it seems that 50 MHz is
- * mandatory.
- */
- mmc_set_clock(host, 50000000);
- } else {
- mmc_set_clock(host, card->cis.max_dtr);
- }
+ mmc_set_clock(host, mmc_sdio_get_max_clock(card));
/*
* Switch to wider bus (if supported).
*/
- err = sdio_enable_wide(card);
- if (err)
+ err = sdio_enable_4bit_bus(card);
+ if (err > 0)
+ mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
+ else if (err)
goto remove;
+finish:
if (!oldcard)
host->card = card;
return 0;
mmc_claim_host(host);
err = mmc_sdio_init_card(host, host->ocr, host->card,
(host->pm_flags & MMC_PM_KEEP_POWER));
- if (!err)
+ if (!err) {
/* We may have switched to 1-bit mode during suspend. */
- err = sdio_enable_wide(host->card);
+ err = sdio_enable_4bit_bus(host->card);
+ if (err > 0) {
+ mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
+ err = 0;
+ }
+ }
if (!err && host->sdio_irqs)
mmc_signal_sdio_irq(host);
mmc_release_host(host);
funcs = (ocr & 0x70000000) >> 28;
card->sdio_funcs = 0;
- /*
- * If needed, disconnect card detection pull-up resistor.
- */
- err = sdio_disable_cd(card);
- if (err)
- goto remove;
-
/*
* Initialize (but don't add) all present functions.
*/
If unsure, say N.
+config MMC_SDHCI_CNS3XXX
+ bool "SDHCI support on the Cavium Networks CNS3xxx SoC"
+ depends on ARCH_CNS3XXX
+ depends on MMC_SDHCI_PLTFM
+ help
+ This selects the SDHCI support for CNS3xxx System-on-Chip devices.
+
+ If unsure, say N.
+
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX)
If unsure, say N.
-config MMC_MSM7X00A
- tristate "Qualcomm MSM 7X00A SDCC Controller Support"
- depends on MMC && ARCH_MSM && !ARCH_MSM7X30
+config MMC_MSM
+ tristate "Qualcomm SDCC Controller Support"
+ depends on MMC && ARCH_MSM
help
This provides support for the SD/MMC cell found in the
- MSM 7X00A controllers from Qualcomm.
+ MSM and QSD SOCs from Qualcomm. The controller also has
+ support for SDIO devices.
config MMC_MXC
tristate "Freescale i.MX2/3 Multimedia Card Interface support"
obj-$(CONFIG_MMC_MXC) += mxcmmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
-obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
-obj-$(CONFIG_MMC_MSM7X00A) += msm_sdcc.o
+obj-$(CONFIG_MMC_MSM) += msm_sdcc.o
obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o
obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o
+obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-platform.o
+sdhci-platform-y := sdhci-pltfm.o
+sdhci-platform-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
+
obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
sdhci-of-y := sdhci-of-core.o
sdhci-of-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
host->data_dma, sizeof(*host->data),
DMA_FROM_DEVICE);
- status = spi_sync(host->spi, &host->readback);
+ status = spi_sync_locked(host->spi, &host->readback);
if (host->dma_dev)
dma_sync_single_for_cpu(host->dma_dev,
host->data_dma, sizeof(*host->data),
DMA_BIDIRECTIONAL);
}
- status = spi_sync(host->spi, &host->m);
+ status = spi_sync_locked(host->spi, &host->m);
if (host->dma_dev)
dma_sync_single_for_cpu(host->dma_dev,
host->data_dma, sizeof(*scratch),
DMA_BIDIRECTIONAL);
- status = spi_sync(spi, &host->m);
+ status = spi_sync_locked(spi, &host->m);
if (status != 0) {
dev_dbg(&spi->dev, "write error (%d)\n", status);
DMA_FROM_DEVICE);
}
- status = spi_sync(spi, &host->m);
+ status = spi_sync_locked(spi, &host->m);
if (host->dma_dev) {
dma_sync_single_for_cpu(host->dma_dev,
host->data_dma, sizeof(*scratch),
DMA_BIDIRECTIONAL);
- tmp = spi_sync(spi, &host->m);
+ tmp = spi_sync_locked(spi, &host->m);
if (host->dma_dev)
dma_sync_single_for_cpu(host->dma_dev,
}
#endif
+ /* request exclusive bus access */
+ spi_bus_lock(host->spi->master);
+
/* issue command; then optionally data and stop */
status = mmc_spi_command_send(host, mrq, mrq->cmd, mrq->data != NULL);
if (status == 0 && mrq->data) {
mmc_cs_off(host);
}
+ /* release the bus */
+ spi_bus_unlock(host->spi->master);
+
mmc_request_done(host->mmc, mrq);
}
return IRQ_HANDLED;
}
-struct count_children {
- unsigned n;
- struct bus_type *bus;
-};
-
-static int maybe_count_child(struct device *dev, void *c)
-{
- struct count_children *ccp = c;
-
- if (dev->bus == ccp->bus) {
- if (ccp->n)
- return -EBUSY;
- ccp->n++;
- }
- return 0;
-}
-
static int mmc_spi_probe(struct spi_device *spi)
{
void *ones;
return status;
}
- /* We can use the bus safely iff nobody else will interfere with us.
- * Most commands consist of one SPI message to issue a command, then
- * several more to collect its response, then possibly more for data
- * transfer. Clocking access to other devices during that period will
- * corrupt the command execution.
- *
- * Until we have software primitives which guarantee non-interference,
- * we'll aim for a hardware-level guarantee.
- *
- * REVISIT we can't guarantee another device won't be added later...
- */
- if (spi->master->num_chipselect > 1) {
- struct count_children cc;
-
- cc.n = 0;
- cc.bus = spi->dev.bus;
- status = device_for_each_child(spi->dev.parent, &cc,
- maybe_count_child);
- if (status < 0) {
- dev_err(&spi->dev, "can't share SPI bus\n");
- return status;
- }
-
- dev_warn(&spi->dev, "ASSUMING SPI bus stays unshared!\n");
- }
-
/* We need a supply of ones to transmit. This is the only time
* the CPU touches these, so cache coherency isn't a concern.
*
#if defined(CONFIG_OF)
static struct of_device_id mmc_spi_of_match_table[] __devinitdata = {
{ .compatible = "mmc-spi-slot", },
+ {},
};
#endif
uint32_t msmsdcc_fifo_addr(struct msmsdcc_host *host)
{
- switch (host->pdev_id) {
- case 1:
- return MSM_SDC1_PHYS + MMCIFIFO;
- case 2:
- return MSM_SDC2_PHYS + MMCIFIFO;
- case 3:
- return MSM_SDC3_PHYS + MMCIFIFO;
- case 4:
- return MSM_SDC4_PHYS + MMCIFIFO;
- }
- BUG();
- return 0;
+ return host->memres->start + MMCIFIFO;
}
static inline void
return 0;
}
-#ifdef CONFIG_MMC_MSM7X00A_RESUME_IN_WQ
-static void
-do_resume_work(struct work_struct *work)
-{
- struct msmsdcc_host *host =
- container_of(work, struct msmsdcc_host, resume_task);
- struct mmc_host *mmc = host->mmc;
-
- if (mmc) {
- mmc_resume_host(mmc);
- if (host->stat_irq)
- enable_irq(host->stat_irq);
- }
-}
-#endif
-
static int
msmsdcc_probe(struct platform_device *pdev)
{
- struct mmc_platform_data *plat = pdev->dev.platform_data;
+ struct msm_mmc_platform_data *plat = pdev->dev.platform_data;
struct msmsdcc_host *host;
struct mmc_host *mmc;
struct resource *cmd_irqres = NULL;
host->dmares = dmares;
spin_lock_init(&host->lock);
-#ifdef CONFIG_MMC_EMBEDDED_SDIO
- if (plat->embedded_sdio)
- mmc_set_embedded_sdio_data(mmc,
- &plat->embedded_sdio->cis,
- &plat->embedded_sdio->cccr,
- plat->embedded_sdio->funcs,
- plat->embedded_sdio->num_funcs);
-#endif
-
/*
* Setup DMA
*/
return ret;
}
+#ifdef CONFIG_PM
+#ifdef CONFIG_MMC_MSM7X00A_RESUME_IN_WQ
+static void
+do_resume_work(struct work_struct *work)
+{
+ struct msmsdcc_host *host =
+ container_of(work, struct msmsdcc_host, resume_task);
+ struct mmc_host *mmc = host->mmc;
+
+ if (mmc) {
+ mmc_resume_host(mmc);
+ if (host->stat_irq)
+ enable_irq(host->stat_irq);
+ }
+}
+#endif
+
+
static int
msmsdcc_suspend(struct platform_device *dev, pm_message_t state)
{
}
return 0;
}
+#else
+#define msmsdcc_suspend 0
+#define msmsdcc_resume 0
+#endif
static struct platform_driver msmsdcc_driver = {
.probe = msmsdcc_probe,
u32 pwr;
u32 saved_irq0mask; /* MMCIMASK0 reg value */
- struct mmc_platform_data *plat;
+ struct msm_mmc_platform_data *plat;
struct timer_list timer;
unsigned int oldstat;
int cmdpoll;
struct msmsdcc_stats stats;
-#ifdef CONFIG_MMC_MSM7X00A_RESUME_IN_WQ
- struct work_struct resume_task;
-#endif
-
/* Command parameters */
unsigned int cmd_timeout;
unsigned int cmd_pio_irqmask;
#include <linux/clk.h>
#include <linux/mmc/host.h>
#include <linux/mmc/core.h>
+#include <linux/mmc/mmc.h>
#include <linux/io.h>
#include <linux/semaphore.h>
#include <linux/gpio.h>
#define INT_EN_MASK 0x307F0033
#define BWR_ENABLE (1 << 4)
#define BRR_ENABLE (1 << 5)
+#define DTO_ENABLE (1 << 20)
#define INIT_STREAM (1 << 1)
#define DP_SELECT (1 << 21)
#define DDIR (1 << 4)
dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
}
-static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host)
+static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host,
+ struct mmc_command *cmd)
{
unsigned int irq_mask;
else
irq_mask = INT_EN_MASK;
+ /* Disable timeout for erases */
+ if (cmd->opcode == MMC_ERASE)
+ irq_mask &= ~DTO_ENABLE;
+
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
host->cmd = cmd;
- omap_hsmmc_enable_irq(host);
+ omap_hsmmc_enable_irq(host, cmd);
host->response_busy = 0;
if (cmd->flags & MMC_RSP_PRESENT) {
struct mmc_data *data = host->mrq->data;
int dma_ch, req_in_progress;
- if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ)
- dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n");
+ if (!(ch_status & OMAP_DMA_BLOCK_IRQ)) {
+ dev_warn(mmc_dev(host->mmc), "unexpected dma status %x\n",
+ ch_status);
+ return;
+ }
spin_lock(&host->irq_lock);
if (host->dma_ch < 0) {
return mmc_slot(host).get_ro(host->dev, 0);
}
+static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
+{
+ struct omap_hsmmc_host *host = mmc_priv(mmc);
+
+ if (mmc_slot(host).init_card)
+ mmc_slot(host).init_card(card);
+}
+
static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host)
{
u32 hctl, capa, value;
.set_ios = omap_hsmmc_set_ios,
.get_cd = omap_hsmmc_get_cd,
.get_ro = omap_hsmmc_get_ro,
+ .init_card = omap_hsmmc_init_card,
/* NYET -- enable_sdio_irq */
};
.set_ios = omap_hsmmc_set_ios,
.get_cd = omap_hsmmc_get_cd,
.get_ro = omap_hsmmc_get_ro,
+ .init_card = omap_hsmmc_init_card,
/* NYET -- enable_sdio_irq */
};
mmc->max_seg_size = mmc->max_req_size;
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_WAIT_WHILE_BUSY;
+ MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
- if (mmc_slot(host).wires >= 8)
+ switch (mmc_slot(host).wires) {
+ case 8:
mmc->caps |= MMC_CAP_8_BIT_DATA;
- else if (mmc_slot(host).wires >= 4)
+ /* Fall through */
+ case 4:
mmc->caps |= MMC_CAP_4_BIT_DATA;
+ break;
+ case 1:
+ /* Nothing to crib here */
+ case 0:
+ /* Assuming nothing was given by board, Core use's 1-Bit */
+ break;
+ default:
+ /* Completely unexpected.. Core goes with 1-Bit Width */
+ dev_crit(mmc_dev(host->mmc), "Invalid width %d\n used!"
+ "using 1 instead\n", mmc_slot(host).wires);
+ }
if (mmc_slot(host).nonremovable)
mmc->caps |= MMC_CAP_NONREMOVABLE;
--- /dev/null
+/*
+ * SDHCI support for CNS3xxx SoC
+ *
+ * Copyright 2008 Cavium Networks
+ * Copyright 2010 MontaVista Software, LLC.
+ *
+ * Authors: Scott Shu
+ * Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+#include <linux/sdhci-pltfm.h>
+#include <mach/cns3xxx.h>
+#include "sdhci.h"
+#include "sdhci-pltfm.h"
+
+static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host)
+{
+ return 150000000;
+}
+
+static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct device *dev = mmc_dev(host->mmc);
+ int div = 1;
+ u16 clk;
+ unsigned long timeout;
+
+ if (clock == host->clock)
+ return;
+
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ goto out;
+
+ while (host->max_clk / div > clock) {
+ /*
+ * On CNS3xxx divider grows linearly up to 4, and then
+ * exponentially up to 256.
+ */
+ if (div < 4)
+ div += 1;
+ else if (div < 256)
+ div *= 2;
+ else
+ break;
+ }
+
+ dev_dbg(dev, "desired SD clock: %d, actual: %d\n",
+ clock, host->max_clk / div);
+
+ /* Divide by 3 is special. */
+ if (div != 3)
+ div >>= 1;
+
+ clk = div << SDHCI_DIVIDER_SHIFT;
+ clk |= SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ timeout = 20;
+ while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
+ dev_warn(dev, "clock is unstable");
+ break;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+out:
+ host->clock = clock;
+}
+
+static struct sdhci_ops sdhci_cns3xxx_ops = {
+ .get_max_clock = sdhci_cns3xxx_get_max_clk,
+ .set_clock = sdhci_cns3xxx_set_clock,
+};
+
+struct sdhci_pltfm_data sdhci_cns3xxx_pdata = {
+ .ops = &sdhci_cns3xxx_ops,
+ .quirks = SDHCI_QUIRK_BROKEN_DMA |
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+ SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+ SDHCI_QUIRK_NONSTANDARD_CLOCK,
+};
#ifdef CONFIG_PM
-static int sdhci_of_suspend(struct of_device *ofdev, pm_message_t state)
+static int sdhci_of_suspend(struct platform_device *ofdev, pm_message_t state)
{
struct sdhci_host *host = dev_get_drvdata(&ofdev->dev);
return mmc_suspend_host(host->mmc);
}
-static int sdhci_of_resume(struct of_device *ofdev)
+static int sdhci_of_resume(struct platform_device *ofdev)
{
struct sdhci_host *host = dev_get_drvdata(&ofdev->dev);
return machine_is(mpc837x_rdb) || machine_is(mpc837x_mds);
}
-static int __devinit sdhci_of_probe(struct of_device *ofdev,
+static int __devinit sdhci_of_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
host->ops = &sdhci_of_data->ops;
}
+ if (of_get_property(np, "sdhci,auto-cmd12", NULL))
+ host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+
if (of_get_property(np, "sdhci,1-bit-only", NULL))
host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
return ret;
}
-static int __devexit sdhci_of_remove(struct of_device *ofdev)
+static int __devexit sdhci_of_remove(struct platform_device *ofdev)
{
struct sdhci_host *host = dev_get_drvdata(&ofdev->dev);
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
+#include <linux/device.h>
#include <linux/mmc/host.h>
if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG ||
chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SONY)
chip->quirks |= SDHCI_QUIRK_NO_CARD_NO_RESET;
+ return 0;
+}
+
+static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
+{
+ slot->host->caps =
+ ((0x21 << SDHCI_TIMEOUT_CLK_SHIFT)
+ & SDHCI_TIMEOUT_CLK_MASK) |
+
+ ((0x21 << SDHCI_CLOCK_BASE_SHIFT)
+ & SDHCI_CLOCK_BASE_MASK) |
+ SDHCI_TIMEOUT_CLK_UNIT |
+ SDHCI_CAN_VDD_330 |
+ SDHCI_CAN_DO_SDMA;
+ return 0;
+}
+
+static int ricoh_mmc_resume(struct sdhci_pci_chip *chip)
+{
+ /* Apply a delay to allow controller to settle */
+ /* Otherwise it becomes confused if card state changed
+ during suspend */
+ msleep(500);
return 0;
}
SDHCI_QUIRK_CLOCK_BEFORE_RESET,
};
+static const struct sdhci_pci_fixes sdhci_ricoh_mmc = {
+ .probe_slot = ricoh_mmc_probe_slot,
+ .resume = ricoh_mmc_resume,
+ .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_CLOCK_BEFORE_RESET |
+ SDHCI_QUIRK_NO_CARD_NO_RESET |
+ SDHCI_QUIRK_MISSING_CAPS
+};
+
static const struct sdhci_pci_fixes sdhci_ene_712 = {
.quirks = SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_BROKEN_DMA,
.driver_data = (kernel_ulong_t)&sdhci_ricoh,
},
+ {
+ .vendor = PCI_VENDOR_ID_RICOH,
+ .device = 0x843,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_ricoh_mmc,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_RICOH,
+ .device = 0xe822,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_ricoh_mmc,
+ },
+
{
.vendor = PCI_VENDOR_ID_ENE,
.device = PCI_DEVICE_ID_ENE_CB712_SD,
#include <linux/delay.h>
#include <linux/highmem.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/mmc/host.h>
#include <linux/sdhci-pltfm.h>
#include "sdhci.h"
+#include "sdhci-pltfm.h"
/*****************************************************************************\
* *
static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_data *pdata = pdev->dev.platform_data;
+ const struct platform_device_id *platid = platform_get_device_id(pdev);
struct sdhci_host *host;
struct resource *iomem;
int ret;
+ if (!pdata && platid && platid->driver_data)
+ pdata = (void *)platid->driver_data;
+
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem) {
ret = -ENOMEM;
return 0;
}
+static const struct platform_device_id sdhci_pltfm_ids[] = {
+ { "sdhci", },
+#ifdef CONFIG_MMC_SDHCI_CNS3XXX
+ { "sdhci-cns3xxx", (kernel_ulong_t)&sdhci_cns3xxx_pdata },
+#endif
+ { },
+};
+MODULE_DEVICE_TABLE(platform, sdhci_pltfm_ids);
+
static struct platform_driver sdhci_pltfm_driver = {
.driver = {
.name = "sdhci",
},
.probe = sdhci_pltfm_probe,
.remove = __devexit_p(sdhci_pltfm_remove),
+ .id_table = sdhci_pltfm_ids,
};
/*****************************************************************************\
MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver");
MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:sdhci");
--- /dev/null
+/*
+ * Copyright 2010 MontaVista Software, LLC.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DRIVERS_MMC_SDHCI_PLTFM_H
+#define _DRIVERS_MMC_SDHCI_PLTFM_H
+
+#include <linux/sdhci-pltfm.h>
+
+extern struct sdhci_pltfm_data sdhci_cns3xxx_pdata;
+
+#endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <linux/mmc/host.h>
struct resource *ioarea;
struct s3c_sdhci_platdata *pdata;
unsigned int cur_clk;
+ int ext_cd_irq;
+ int ext_cd_gpio;
struct clk *clk_io;
struct clk *clk_bus[MAX_BUS_CLK];
return max;
}
-static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host)
-{
- return sdhci_s3c_get_max_clk(host) / 1000000;
-}
-
/**
* sdhci_s3c_consider_clock - consider one the bus clocks for current setting
* @ourhost: Our SDHCI instance.
ourhost->cur_clk = best_src;
host->max_clk = clk_get_rate(clk);
- host->timeout_clk = sdhci_s3c_get_timeout_clk(host);
ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
}
}
+/**
+ * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
+ * @host: The SDHCI host being queried
+ *
+ * To init mmc host properly a minimal clock value is needed. For high system
+ * bus clock's values the standard formula gives values out of allowed range.
+ * The clock still can be set to lower values, if clock source other then
+ * system bus is selected.
+*/
+static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ unsigned int delta, min = UINT_MAX;
+ int src;
+
+ for (src = 0; src < MAX_BUS_CLK; src++) {
+ delta = sdhci_s3c_consider_clock(ourhost, src, 0);
+ if (delta == UINT_MAX)
+ continue;
+ /* delta is a negative value in this case */
+ if (-delta < min)
+ min = -delta;
+ }
+ return min;
+}
+
static struct sdhci_ops sdhci_s3c_ops = {
.get_max_clock = sdhci_s3c_get_max_clk,
- .get_timeout_clock = sdhci_s3c_get_timeout_clk,
.set_clock = sdhci_s3c_set_clock,
+ .get_min_clock = sdhci_s3c_get_min_clock,
};
+static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
+{
+ struct sdhci_host *host = platform_get_drvdata(dev);
+ if (host) {
+ mutex_lock(&host->lock);
+ if (state) {
+ dev_dbg(&dev->dev, "card inserted.\n");
+ host->flags &= ~SDHCI_DEVICE_DEAD;
+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+ } else {
+ dev_dbg(&dev->dev, "card removed.\n");
+ host->flags |= SDHCI_DEVICE_DEAD;
+ host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+ }
+ sdhci_card_detect(host);
+ mutex_unlock(&host->lock);
+ }
+}
+
+static irqreturn_t sdhci_s3c_gpio_card_detect_thread(int irq, void *dev_id)
+{
+ struct sdhci_s3c *sc = dev_id;
+ int status = gpio_get_value(sc->ext_cd_gpio);
+ if (sc->pdata->ext_cd_gpio_invert)
+ status = !status;
+ sdhci_s3c_notify_change(sc->pdev, status);
+ return IRQ_HANDLED;
+}
+
+static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
+{
+ struct s3c_sdhci_platdata *pdata = sc->pdata;
+ struct device *dev = &sc->pdev->dev;
+
+ if (gpio_request(pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
+ sc->ext_cd_gpio = pdata->ext_cd_gpio;
+ sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
+ if (sc->ext_cd_irq &&
+ request_threaded_irq(sc->ext_cd_irq, NULL,
+ sdhci_s3c_gpio_card_detect_thread,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ dev_name(dev), sc) == 0) {
+ int status = gpio_get_value(sc->ext_cd_gpio);
+ if (pdata->ext_cd_gpio_invert)
+ status = !status;
+ sdhci_s3c_notify_change(sc->pdev, status);
+ } else {
+ dev_warn(dev, "cannot request irq for card detect\n");
+ sc->ext_cd_irq = 0;
+ }
+ } else {
+ dev_err(dev, "cannot request gpio for card detect\n");
+ }
+}
+
static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
{
struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
sc->host = host;
sc->pdev = pdev;
sc->pdata = pdata;
+ sc->ext_cd_gpio = -1; /* invalid gpio number */
platform_set_drvdata(pdev, host);
/* Setup quirks for the controller */
host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
+ host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
#ifndef CONFIG_MMC_SDHCI_S3C_DMA
* SDHCI block, or a missing configuration that needs to be set. */
host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
+ if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
+ pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+ if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
+ host->mmc->caps = MMC_CAP_NONREMOVABLE;
+
host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
SDHCI_QUIRK_32BIT_DMA_SIZE);
+ /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
+ host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+
ret = sdhci_add_host(host);
if (ret) {
dev_err(dev, "sdhci_add_host() failed\n");
goto err_add_host;
}
+ /* The following two methods of card detection might call
+ sdhci_s3c_notify_change() immediately, so they can be called
+ only after sdhci_add_host(). Setup errors are ignored. */
+ if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init)
+ pdata->ext_cd_init(&sdhci_s3c_notify_change);
+ if (pdata->cd_type == S3C_SDHCI_CD_GPIO &&
+ gpio_is_valid(pdata->ext_cd_gpio))
+ sdhci_s3c_setup_card_detect_gpio(sc);
+
return 0;
err_add_host:
static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
{
+ struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_s3c *sc = sdhci_priv(host);
int ptr;
+ if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
+ pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
+
+ if (sc->ext_cd_irq)
+ free_irq(sc->ext_cd_irq, sc);
+
+ if (gpio_is_valid(sc->ext_cd_gpio))
+ gpio_free(sc->ext_cd_gpio);
+
sdhci_remove_host(host, 1);
for (ptr = 0; ptr < 3; ptr++) {
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/scatterlist.h>
+#include <linux/regulator/consumer.h>
#include <linux/leds.h>
WARN_ON(!host->data);
mode = SDHCI_TRNS_BLK_CNT_EN;
- if (data->blocks > 1)
- mode |= SDHCI_TRNS_MULTI;
+ if (data->blocks > 1) {
+ if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
+ mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12;
+ else
+ mode |= SDHCI_TRNS_MULTI;
+ }
if (data->flags & MMC_DATA_READ)
mode |= SDHCI_TRNS_READ;
if (host->flags & SDHCI_REQ_USE_DMA)
#ifndef SDHCI_USE_LEDS_CLASS
sdhci_activate_led(host);
#endif
+ if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) {
+ if (mrq->stop) {
+ mrq->data->stop = NULL;
+ mrq->stop = NULL;
+ }
+ }
host->mrq = mrq;
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ if (ios->bus_width == MMC_BUS_WIDTH_8)
+ ctrl |= SDHCI_CTRL_8BITBUS;
+ else
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
+
if (ios->bus_width == MMC_BUS_WIDTH_4)
ctrl |= SDHCI_CTRL_4BITBUS;
else
free_irq(host->irq, host);
- return 0;
+ if (host->vmmc)
+ ret = regulator_disable(host->vmmc);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(sdhci_suspend_host);
{
int ret;
+ if (host->vmmc) {
+ int ret = regulator_enable(host->vmmc);
+ if (ret)
+ return ret;
+ }
+
+
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma)
host->ops->enable_dma(host);
host->version);
}
- caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+ caps = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
+ sdhci_readl(host, SDHCI_CAPABILITIES);
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
host->flags |= SDHCI_USE_SDMA;
* Set host parameters.
*/
mmc->ops = &sdhci_ops;
- if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK &&
- host->ops->set_clock && host->ops->get_min_clock)
+ if (host->ops->get_min_clock)
mmc->f_min = host->ops->get_min_clock(host);
else
mmc->f_min = host->max_clk / 256;
mmc->f_max = host->max_clk;
- mmc->caps = MMC_CAP_SDIO_IRQ;
+ mmc->caps |= MMC_CAP_SDIO_IRQ;
if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
mmc->caps |= MMC_CAP_4_BIT_DATA;
if (ret)
goto untasklet;
+ host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
+ if (IS_ERR(host->vmmc)) {
+ printk(KERN_INFO "%s: no vmmc regulator found\n", mmc_hostname(mmc));
+ host->vmmc = NULL;
+ } else {
+ regulator_enable(host->vmmc);
+ }
+
sdhci_init(host, 0);
#ifdef CONFIG_MMC_DEBUG
tasklet_kill(&host->card_tasklet);
tasklet_kill(&host->finish_tasklet);
+ if (host->vmmc) {
+ regulator_disable(host->vmmc);
+ regulator_put(host->vmmc);
+ }
+
kfree(host->adma_desc);
kfree(host->align_buffer);
#define SDHCI_CTRL_ADMA1 0x08
#define SDHCI_CTRL_ADMA32 0x10
#define SDHCI_CTRL_ADMA64 0x18
+#define SDHCI_CTRL_8BITBUS 0x20
#define SDHCI_POWER_CONTROL 0x29
#define SDHCI_POWER_ON 0x01
#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
/* Controller cannot support End Attribute in NOP ADMA descriptor */
#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
+/* Controller is missing device caps. Use caps provided by host */
+#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
+/* Controller uses Auto CMD12 command to stop the transfer */
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
const struct sdhci_ops *ops; /* Low level hw interface */
+ struct regulator *vmmc; /* Power regulator */
+
/* Internal data */
struct mmc_host *mmc; /* MMC structure */
u64 dma_mask; /* custom DMA mask */
struct timer_list timer; /* Timer for timeouts */
+ unsigned int caps; /* Alternative capabilities */
+
unsigned long private[0] ____cacheline_aligned;
};
return (void *)host->private;
}
+extern void sdhci_card_detect(struct sdhci_host *host);
extern int sdhci_add_host(struct sdhci_host *host);
extern void sdhci_remove_host(struct sdhci_host *host, int dead);
select MTD_BLKDEVS
select MTD_NAND_ECC
help
- This enables new and very EXPERMENTAL support for SmartMedia/xD
+ This enables EXPERIMENTAL R/W support for SmartMedia/xD
FTL (Flash translation layer).
- Write support isn't yet well tested, therefore this code IS likely to
- eat your card, so please don't use it together with valuable data.
- Use readonly driver (CONFIG_SSFDC) instead.
+ Write support is only lightly tested, therefore this driver
+ isn't recommended to use with valuable data (anyway if you have
+ valuable data, do backups regardless of software/hardware you
+ use, because you never know what will eat your data...)
+ If you only need R/O access, you can use older R/O driver
+ (CONFIG_SSFDC)
config MTD_OOPS
tristate "Log panic/oops to an MTD buffer"
- depends on MTD
help
This enables panic and oops messages to be logged to a circular
buffer in a flash partition where it can be read back at some
drivers/mtd/afs.c: ARM Flash Layout/Partitioning
- Copyright (C) 2000 ARM Limited
+ Copyright © 2000 ARM Limited
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
#include <linux/mtd/xip.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
#include <linux/mtd/cfi.h>
/* #define CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE */
static void cfi_intelext_sync (struct mtd_info *);
static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len);
#ifdef CONFIG_MTD_OTP
static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
mtd->sync = cfi_intelext_sync;
mtd->lock = cfi_intelext_lock;
mtd->unlock = cfi_intelext_unlock;
+ mtd->is_locked = cfi_intelext_is_locked;
mtd->suspend = cfi_intelext_suspend;
mtd->resume = cfi_intelext_resume;
mtd->flags = MTD_CAP_NORFLASH;
chip = &newcfi->chips[0];
for (i = 0; i < cfi->numchips; i++) {
shared[i].writing = shared[i].erasing = NULL;
- spin_lock_init(&shared[i].lock);
+ mutex_init(&shared[i].lock);
for (j = 0; j < numparts; j++) {
*chip = cfi->chips[i];
chip->start += j << partshift;
*/
struct flchip_shared *shared = chip->priv;
struct flchip *contender;
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
contender = shared->writing;
if (contender && contender != chip) {
/*
* get_chip returns success we're clear to go ahead.
*/
ret = mutex_trylock(&contender->mutex);
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
if (!ret)
goto retry;
mutex_unlock(&chip->mutex);
mutex_unlock(&contender->mutex);
return ret;
}
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
/* We should not own chip if it is already
* in FL_SYNCING state. Put contender and retry. */
* on this chip. Sleep. */
if (mode == FL_ERASING && shared->erasing
&& shared->erasing->oldstate == FL_ERASING) {
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&chip->wq, &wait);
mutex_unlock(&chip->mutex);
shared->writing = chip;
if (mode == FL_ERASING)
shared->erasing = chip;
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
}
ret = chip_ready(map, chip, adr, mode);
if (ret == -EAGAIN)
if (chip->priv) {
struct flchip_shared *shared = chip->priv;
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
if (shared->writing == chip && chip->oldstate == FL_READY) {
/* We own the ability to write, but we're done */
shared->writing = shared->erasing;
/* give back ownership to who we loaned it from */
struct flchip *loaner = shared->writing;
mutex_lock(&loaner->mutex);
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
mutex_unlock(&chip->mutex);
put_chip(map, loaner, loaner->start);
mutex_lock(&chip->mutex);
* Don't let the switch below mess things up since
* we don't have ownership to resume anything.
*/
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
wake_up(&chip->wq);
return;
}
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
}
switch(chip->oldstate) {
return ret;
}
+static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return cfi_varsize_frob(mtd, do_getlockstatus_oneblock,
+ ofs, len, NULL) ? 1 : 0;
+}
+
#ifdef CONFIG_MTD_OTP
typedef int (*otp_op_t)(struct map_info *map, struct flchip *chip,
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
-#include <linux/mtd/compatmac.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/cfi.h>
*/
cfi_fixup_major_minor(cfi, extp);
+ /*
+ * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4
+ * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19
+ * http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
+ * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
+ */
if (extp->MajorVersion != '1' ||
- (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
+ (extp->MajorVersion == '1' && (extp->MinorVersion < '0' || extp->MinorVersion > '4'))) {
printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query "
- "version %c.%c.\n", extp->MajorVersion,
- extp->MinorVersion);
+ "version %c.%c (%#02x/%#02x).\n",
+ extp->MajorVersion, extp->MinorVersion,
+ extp->MajorVersion, extp->MinorVersion);
kfree(extp);
kfree(mtd);
return NULL;
}
+ printk(KERN_INFO " Amd/Fujitsu Extended Query version %c.%c.\n",
+ extp->MajorVersion, extp->MinorVersion);
+
/* Install our own private info structure */
cfi->cmdset_priv = extp;
#include <linux/mtd/map.h>
#include <linux/mtd/cfi.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
static int cfi_staa_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
cfi_qry_mode_off(base, map, cfi);
xip_allowed(base, map);
- printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
+ printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n",
map->name, cfi->interleave, cfi->device_type*8, base,
- map->bankwidth*8);
+ map->bankwidth*8, cfi->mfr, cfi->id);
return 1;
}
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/cfi.h>
-#include <linux/mtd/compatmac.h>
int __xipram cfi_qry_present(struct map_info *map, __u32 base,
struct cfi_private *cfi)
#include <linux/slab.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
static DEFINE_SPINLOCK(chip_drvs_lock);
static LIST_HEAD(chip_drvs_list);
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
static int map_absent_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int map_absent_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
static int mapram_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
static int maprom_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
/*
* Read flash partition table from command line
*
- * Copyright 2002 SYSGO Real-Time Solutions GmbH
+ * Copyright © 2002 SYSGO Real-Time Solutions GmbH
+ * Copyright © 2002-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* The format for the command line is as follows:
*
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/mtd/compatmac.h> /* for min() in older kernels */
#include <linux/mtd/mtd.h>
#include <linux/mtd/doc2000.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/doc2000.h>
-#include <linux/mtd/compatmac.h>
/* Where to look for the devices? */
#ifndef CONFIG_MTD_DOCPROBE_ADDRESS
*/
#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/errno.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
spi_message_add_tail(&t[1], &m);
/* Byte count starts at zero. */
- if (retlen)
- *retlen = 0;
+ *retlen = 0;
mutex_lock(&flash->lock);
dev_name(&flash->spi->dev), __func__, "to",
(u32)to, len);
- if (retlen)
- *retlen = 0;
+ *retlen = 0;
/* sanity checks */
if (!len)
spi_sync(flash->spi, &m);
- if (retlen)
- *retlen += m.actual_length - m25p_cmdsz(flash);
+ *retlen += m.actual_length - m25p_cmdsz(flash);
}
}
size_t actual;
int cmd_sz, ret;
- if (retlen)
- *retlen = 0;
+ *retlen = 0;
/* sanity checks */
if (!len)
{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
{ "at26df321", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
+ /* EON -- en25pxx */
+ { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
+ { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
+
+ /* Intel/Numonyx -- xxxs33b */
+ { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
+ { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) },
+ { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) },
+
/* Macronix */
{ "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
+ { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
{ "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) },
{ "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
{ "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
+ { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) },
+ { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) },
+ { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) },
+ { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) },
+ { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) },
+ { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) },
+ { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) },
+ { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) },
+ { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) },
+
{ "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) },
{ "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) },
{ "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) },
{ "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
{ "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
+ { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
/* Catalyst / On Semiconductor -- non-JEDEC */
if (tmp < 0) {
DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
dev_name(&spi->dev), tmp);
- return NULL;
+ return ERR_PTR(tmp);
}
jedec = id[0];
jedec = jedec << 8;
jedec = jedec << 8;
jedec |= id[2];
- /*
- * Some chips (like Numonyx M25P80) have JEDEC and non-JEDEC variants,
- * which depend on technology process. Officially RDID command doesn't
- * exist for non-JEDEC chips, but for compatibility they return ID 0.
- */
- if (jedec == 0)
- return NULL;
-
ext_jedec = id[3] << 8 | id[4];
for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) {
return &m25p_ids[tmp];
}
}
- return NULL;
+ return ERR_PTR(-ENODEV);
}
break;
}
- if (plat_id)
+ if (i < ARRAY_SIZE(m25p_ids) - 1)
id = plat_id;
else
dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
const struct spi_device_id *jid;
jid = jedec_probe(spi);
- if (!jid) {
- dev_info(&spi->dev, "non-JEDEC variant of %s\n",
- id->name);
+ if (IS_ERR(jid)) {
+ return PTR_ERR(jid);
} else if (jid != id) {
/*
* JEDEC knows better, so overwrite platform ID. We
dev_set_drvdata(&spi->dev, flash);
/*
- * Atmel and SST serial flash tend to power
+ * Atmel, SST and Intel/Numonyx serial flash tend to power
* up with the software protection bits set
*/
if (info->jedec_id >> 16 == 0x1f ||
+ info->jedec_id >> 16 == 0x89 ||
info->jedec_id >> 16 == 0xbf) {
write_enable(flash);
write_sr(flash, 0);
*/
static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
{
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
struct spi_device *spi = priv->spi;
struct spi_transfer x = { .tx_dma = 0, };
struct spi_message msg;
static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
struct spi_transfer x[2] = { { .tx_dma = 0, }, };
struct spi_message msg;
unsigned int addr;
static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t * retlen, const u_char * buf)
{
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
struct spi_device *spi = priv->spi;
struct spi_transfer x[2] = { { .tx_dma = 0, }, };
struct spi_message msg;
static int dataflash_read_fact_otp(struct mtd_info *mtd,
loff_t from, size_t len, size_t *retlen, u_char *buf)
{
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
int status;
/* 64 bytes, from 0..63 ... start at 64 on-chip */
static int dataflash_read_user_otp(struct mtd_info *mtd,
loff_t from, size_t len, size_t *retlen, u_char *buf)
{
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
int status;
/* 64 bytes, from 0..63 ... start at 0 on-chip */
const size_t l = 4 + 64;
uint8_t *scratch;
struct spi_transfer t;
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
int status;
if (len > 64)
#include <linux/ioport.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <linux/mtd/compatmac.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/mtdram.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/pmc551.h>
-#include <linux/mtd/compatmac.h>
static struct mtd_info *pmc551list;
parts, nr_parts);
}
- } else if (data->nr_parts) {
+ } else if (data && data->nr_parts) {
dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
data->nr_parts, data->name);
}
The initial developer of the original code is David A. Hinds
<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+ are Copyright © 1999 David A. Hinds. All Rights Reserved.
Alternatively, the contents of this file may be used under the
terms of the GNU General Public License version 2 (the "GPL"), in
/*
* inftlcore.c -- Linux driver for Inverse Flash Translation Layer (INFTL)
*
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright © 2002, Greg Ungerer (gerg@snapgear.com)
*
* Based heavily on the nftlcore.c code which is:
- * (c) 1999 Machine Vision Holdings, Inc.
- * Author: David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999 David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* inftlmount.c -- INFTL mount code with extensive checks.
*
* Author: Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2002-2003, Greg Ungerer (gerg@snapgear.com)
+ * Copyright © 2002-2003, Greg Ungerer (gerg@snapgear.com)
*
* Based heavily on the nftlmount.c code which is:
* Author: Fabrice Bellard (fabrice.bellard@netgem.com)
- * Copyright (C) 2000 Netgem S.A.
+ * Copyright © 2000 Netgem S.A.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/mtd/mtd.h>
#include <linux/mtd/nftl.h>
#include <linux/mtd/inftl.h>
-#include <linux/mtd/compatmac.h>
/*
* find_boot_record: Find the INFTL Media Header and its Spare copy which
numchips = lpddr->numchips / lpddr->qinfo->HWPartsNum;
for (i = 0; i < numchips; i++) {
shared[i].writing = shared[i].erasing = NULL;
- spin_lock_init(&shared[i].lock);
+ mutex_init(&shared[i].lock);
for (j = 0; j < lpddr->qinfo->HWPartsNum; j++) {
*chip = lpddr->chips[i];
chip->start += j << lpddr->chipshift;
*/
struct flchip_shared *shared = chip->priv;
struct flchip *contender;
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
contender = shared->writing;
if (contender && contender != chip) {
/*
* get_chip returns success we're clear to go ahead.
*/
ret = mutex_trylock(&contender->mutex);
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
if (!ret)
goto retry;
mutex_unlock(&chip->mutex);
mutex_unlock(&contender->mutex);
return ret;
}
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
/* We should not own chip if it is already in FL_SYNCING
* state. Put contender and retry. */
Must sleep in such a case. */
if (mode == FL_ERASING && shared->erasing
&& shared->erasing->oldstate == FL_ERASING) {
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&chip->wq, &wait);
mutex_unlock(&chip->mutex);
shared->writing = chip;
if (mode == FL_ERASING)
shared->erasing = chip;
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
}
ret = chip_ready(map, chip, mode);
{
if (chip->priv) {
struct flchip_shared *shared = chip->priv;
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
if (shared->writing == chip && chip->oldstate == FL_READY) {
/* We own the ability to write, but we're done */
shared->writing = shared->erasing;
/* give back the ownership */
struct flchip *loaner = shared->writing;
mutex_lock(&loaner->mutex);
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
mutex_unlock(&chip->mutex);
put_chip(map, loaner);
mutex_lock(&chip->mutex);
* Don't let the switch below mess things up since
* we don't have ownership to resume anything.
*/
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
wake_up(&chip->wq);
return;
}
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
}
switch (chip->oldstate) {
Mapping for the Flaga digital module. If you don't have one, ignore
this setting.
-config MTD_REDWOOD
- tristate "CFI Flash devices mapped on IBM Redwood"
- depends on MTD_CFI
- help
- This enables access routines for the flash chips on the IBM
- Redwood board. If you have one of these boards and would like to
- use the flash chips on it, say 'Y'.
-
config MTD_SOLUTIONENGINE
tristate "CFI Flash device mapped on Hitachi SolutionEngine"
depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o
obj-$(CONFIG_MTD_FORTUNET) += fortunet.o
-obj-$(CONFIG_MTD_REDWOOD) += redwood.o
obj-$(CONFIG_MTD_UCLINUX) += uclinux.o
obj-$(CONFIG_MTD_NETtel) += nettel.o
obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
*dest++ = BYTE1(data);
src += 2;
len -= 2;
- }
+ }
if (len > 0)
*dest++ = BYTE0(flash_read16(src));
{
struct flash_platform_data *plat = dev->dev.platform_data;
struct ixp4xx_flash_info *info;
+ const char *part_type = NULL;
+ int nr_parts = 0;
int err = -1;
if (!plat)
*/
info->map.bankwidth = 2;
info->map.name = dev_name(&dev->dev);
- info->map.read = ixp4xx_read16,
- info->map.write = ixp4xx_probe_write16,
- info->map.copy_from = ixp4xx_copy_from,
+ info->map.read = ixp4xx_read16;
+ info->map.write = ixp4xx_probe_write16;
+ info->map.copy_from = ixp4xx_copy_from;
info->res = request_mem_region(dev->resource->start,
resource_size(dev->resource),
info->mtd->owner = THIS_MODULE;
/* Use the fast version */
- info->map.write = ixp4xx_write16,
+ info->map.write = ixp4xx_write16;
+
+#ifdef CONFIG_MTD_PARTITIONS
+ nr_parts = parse_mtd_partitions(info->mtd, probes, &info->partitions,
+ dev->resource->start);
+#endif
+ if (nr_parts > 0) {
+ part_type = "dynamic";
+ } else {
+ info->partitions = plat->parts;
+ nr_parts = plat->nr_parts;
+ part_type = "static";
+ }
+ if (nr_parts == 0) {
+ printk(KERN_NOTICE "IXP4xx flash: no partition info "
+ "available, registering whole flash\n");
+ err = add_mtd_device(info->mtd);
+ } else {
+ printk(KERN_NOTICE "IXP4xx flash: using %s partition "
+ "definition\n", part_type);
+ err = add_mtd_partitions(info->mtd, info->partitions, nr_parts);
- err = parse_mtd_partitions(info->mtd, probes, &info->partitions, dev->resource->start);
- if (err > 0) {
- err = add_mtd_partitions(info->mtd, info->partitions, err);
if(err)
printk(KERN_ERR "Could not parse partitions\n");
}
for (i = 0; i < dev->num_resources; i++) {
printk(KERN_NOTICE "physmap platform flash device: %.8llx at %.8llx\n",
- (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1),
+ (unsigned long long)resource_size(&dev->resource[i]),
(unsigned long long)dev->resource[i].start);
if (!devm_request_mem_region(&dev->dev,
dev->resource[i].start,
- dev->resource[i].end - dev->resource[i].start + 1,
+ resource_size(&dev->resource[i]),
dev_name(&dev->dev))) {
dev_err(&dev->dev, "Could not reserve memory region\n");
err = -ENOMEM;
info->map[i].name = dev_name(&dev->dev);
info->map[i].phys = dev->resource[i].start;
- info->map[i].size = dev->resource[i].end - dev->resource[i].start + 1;
+ info->map[i].size = resource_size(&dev->resource[i]);
info->map[i].bankwidth = physmap_data->width;
info->map[i].set_vpp = physmap_data->set_vpp;
info->map[i].pfow_base = physmap_data->pfow_base;
simple_map_init(&info->map[i]);
probe_type = rom_probe_types;
- for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
- info->mtd[i] = do_map_probe(*probe_type, &info->map[i]);
+ if (physmap_data->probe_type == NULL) {
+ for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+ info->mtd[i] = do_map_probe(*probe_type, &info->map[i]);
+ } else
+ info->mtd[i] = do_map_probe(physmap_data->probe_type, &info->map[i]);
+
if (info->mtd[i] == NULL) {
dev_err(&dev->dev, "map_probe failed\n");
err = -ENXIO;
#include <linux/mtd/partitions.h>
#include <linux/mtd/concat.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#ifdef CONFIG_MTD_PARTITIONS
#define OF_FLASH_PARTS(info) ((info)->parts)
-static int parse_obsolete_partitions(struct of_device *dev,
+static int parse_obsolete_partitions(struct platform_device *dev,
struct of_flash *info,
struct device_node *dp)
{
#define parse_partitions(info, dev) (0)
#endif /* MTD_PARTITIONS */
-static int of_flash_remove(struct of_device *dev)
+static int of_flash_remove(struct platform_device *dev)
{
struct of_flash *info;
int i;
/* Helper function to handle probing of the obsolete "direct-mapped"
* compatible binding, which has an extra "probe-type" property
* describing the type of flash probe necessary. */
-static struct mtd_info * __devinit obsolete_probe(struct of_device *dev,
+static struct mtd_info * __devinit obsolete_probe(struct platform_device *dev,
struct map_info *map)
{
struct device_node *dp = dev->dev.of_node;
}
#endif
-static int __devinit of_flash_probe(struct of_device *dev,
+static int __devinit of_flash_probe(struct platform_device *dev,
const struct of_device_id *match)
{
#ifdef CONFIG_MTD_PARTITIONS
&info->parts, 0);
if (err < 0) {
of_free_probes(part_probe_types);
- return err;
+ goto err_out;
}
of_free_probes(part_probe_types);
if (err == 0) {
err = of_mtd_parse_partitions(&dev->dev, dp, &info->parts);
if (err < 0)
- return err;
+ goto err_out;
}
#endif
if (err == 0) {
err = parse_obsolete_partitions(dev, info, dp);
if (err < 0)
- return err;
+ goto err_out;
}
if (err > 0)
+++ /dev/null
-/*
- * drivers/mtd/maps/redwood.c
- *
- * FLASH map for the IBM Redwood 4/5/6 boards.
- *
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * 2001-2003 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#define WINDOW_ADDR 0xffc00000
-#define WINDOW_SIZE 0x00400000
-
-#define RW_PART0_OF 0
-#define RW_PART0_SZ 0x10000
-#define RW_PART1_OF RW_PART0_SZ
-#define RW_PART1_SZ 0x200000 - 0x10000
-#define RW_PART2_OF 0x200000
-#define RW_PART2_SZ 0x10000
-#define RW_PART3_OF 0x210000
-#define RW_PART3_SZ 0x200000 - (0x10000 + 0x20000)
-#define RW_PART4_OF 0x3e0000
-#define RW_PART4_SZ 0x20000
-
-static struct mtd_partition redwood_flash_partitions[] = {
- {
- .name = "Redwood OpenBIOS Vital Product Data",
- .offset = RW_PART0_OF,
- .size = RW_PART0_SZ,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "Redwood kernel",
- .offset = RW_PART1_OF,
- .size = RW_PART1_SZ
- },
- {
- .name = "Redwood OpenBIOS non-volatile storage",
- .offset = RW_PART2_OF,
- .size = RW_PART2_SZ,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "Redwood filesystem",
- .offset = RW_PART3_OF,
- .size = RW_PART3_SZ
- },
- {
- .name = "Redwood OpenBIOS",
- .offset = RW_PART4_OF,
- .size = RW_PART4_SZ,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- }
-};
-
-struct map_info redwood_flash_map = {
- .name = "IBM Redwood",
- .size = WINDOW_SIZE,
- .bankwidth = 2,
- .phys = WINDOW_ADDR,
-};
-
-
-#define NUM_REDWOOD_FLASH_PARTITIONS ARRAY_SIZE(redwood_flash_partitions)
-
-static struct mtd_info *redwood_mtd;
-
-static int __init init_redwood_flash(void)
-{
- int err;
-
- printk(KERN_NOTICE "redwood: flash mapping: %x at %x\n",
- WINDOW_SIZE, WINDOW_ADDR);
-
- redwood_flash_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
- if (!redwood_flash_map.virt) {
- printk("init_redwood_flash: failed to ioremap\n");
- return -EIO;
- }
- simple_map_init(&redwood_flash_map);
-
- redwood_mtd = do_map_probe("cfi_probe",&redwood_flash_map);
-
- if (redwood_mtd) {
- redwood_mtd->owner = THIS_MODULE;
- err = add_mtd_partitions(redwood_mtd,
- redwood_flash_partitions,
- NUM_REDWOOD_FLASH_PARTITIONS);
- if (err) {
- printk("init_redwood_flash: add_mtd_partitions failed\n");
- iounmap(redwood_flash_map.virt);
- }
- return err;
-
- }
-
- iounmap(redwood_flash_map.virt);
- return -ENXIO;
-}
-
-static void __exit cleanup_redwood_flash(void)
-{
- if (redwood_mtd) {
- del_mtd_partitions(redwood_mtd);
- /* moved iounmap after map_destroy - armin */
- map_destroy(redwood_mtd);
- iounmap((void *)redwood_flash_map.virt);
- }
-}
-
-module_init(init_redwood_flash);
-module_exit(cleanup_redwood_flash);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("MontaVista Software <source@mvista.com>");
-MODULE_DESCRIPTION("MTD map driver for the IBM Redwood reference boards");
.bankwidth = UFLASH_BUSWIDTH,
};
-int uflash_devinit(struct of_device *op, struct device_node *dp)
+int uflash_devinit(struct platform_device *op, struct device_node *dp)
{
struct uflash_dev *up;
return 0;
}
-static int __devinit uflash_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit uflash_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
return uflash_devinit(op, dp);
}
-static int __devexit uflash_remove(struct of_device *op)
+static int __devexit uflash_remove(struct platform_device *op)
{
struct uflash_dev *up = dev_get_drvdata(&op->dev);
/*
- * (C) 2003 David Woodhouse <dwmw2@infradead.org>
+ * Interface to Linux block layer for MTD 'translation layers'.
*
- * Interface to Linux 2.5 block layer for MTD 'translation layers'.
+ * Copyright © 2003-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
#include <linux/hdreg.h>
#include <linux/init.h>
#include <linux/mutex.h>
buf = req->buffer;
- if (!blk_fs_request(req))
+ if (req->cmd_type != REQ_TYPE_FS)
return -EIO;
if (blk_rq_pos(req) + blk_rq_cur_sectors(req) >
get_capacity(req->rq_disk))
return -EIO;
- if (blk_discard_rq(req))
+ if (req->cmd_flags & REQ_DISCARD)
return tr->discard(dev, block, nsect);
switch(rq_data_dir(req)) {
int ret;
if (!dev)
- return -ERESTARTSYS;
+ return -ERESTARTSYS; /* FIXME: busy loop! -arnd*/
+ lock_kernel();
mutex_lock(&dev->lock);
if (!dev->mtd) {
unlock:
mutex_unlock(&dev->lock);
blktrans_dev_put(dev);
+ unlock_kernel();
return ret;
}
if (!dev)
return ret;
+ lock_kernel();
mutex_lock(&dev->lock);
/* Release one reference, we sure its not the last one here*/
unlock:
mutex_unlock(&dev->lock);
blktrans_dev_put(dev);
+ unlock_kernel();
return ret;
}
if (!dev)
return ret;
+ lock_kernel();
mutex_lock(&dev->lock);
if (!dev->mtd)
switch (cmd) {
case BLKFLSBUF:
ret = dev->tr->flush ? dev->tr->flush(dev) : 0;
+ break;
default:
ret = -ENOTTY;
}
unlock:
mutex_unlock(&dev->lock);
+ unlock_kernel();
blktrans_dev_put(dev);
return ret;
}
.owner = THIS_MODULE,
.open = blktrans_open,
.release = blktrans_release,
- .locked_ioctl = blktrans_ioctl,
+ .ioctl = blktrans_ioctl,
.getgeo = blktrans_getgeo,
};
BUG();
}
- /* Stop new requests to arrive */
- del_gendisk(old->disk);
-
if (old->disk_attributes)
sysfs_remove_group(&disk_to_dev(old->disk)->kobj,
old->disk_attributes);
+ /* Stop new requests to arrive */
+ del_gendisk(old->disk);
+
+
/* Stop the thread */
kthread_stop(old->thread);
/*
* Direct MTD block device access
*
- * (C) 2000-2003 Nicolas Pitre <nico@fluxnic.net>
- * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2000-2003 Nicolas Pitre <nico@fluxnic.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#include <linux/fs.h>
/*
- * (C) 2003 David Woodhouse <dwmw2@infradead.org>
- *
* Simple read-only (writable only for RAM) mtdblock driver
+ *
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#include <linux/init.h>
/*
- * Character-device access to raw MTD devices.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <linux/mount.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
+#include <linux/mtd/map.h>
#include <asm/uaccess.h>
break;
}
+ case MEMISLOCKED:
+ {
+ struct erase_info_user einfo;
+
+ if (copy_from_user(&einfo, argp, sizeof(einfo)))
+ return -EFAULT;
+
+ if (!mtd->is_locked)
+ ret = -EOPNOTSUPP;
+ else
+ ret = mtd->is_locked(mtd, einfo.start, einfo.length);
+ break;
+ }
+
/* Legacy interface */
case MEMGETOOBSEL:
{
#ifdef CONFIG_MMU
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
+ struct map_info *map = mtd->priv;
+ unsigned long start;
+ unsigned long off;
+ u32 len;
+
+ if (mtd->type == MTD_RAM || mtd->type == MTD_ROM) {
+ off = vma->vm_pgoff << PAGE_SHIFT;
+ start = map->phys;
+ len = PAGE_ALIGN((start & ~PAGE_MASK) + map->size);
+ start &= PAGE_MASK;
+ if ((vma->vm_end - vma->vm_start + off) > len)
+ return -EINVAL;
+
+ off += start;
+ vma->vm_pgoff = off >> PAGE_SHIFT;
+ vma->vm_flags |= VM_IO | VM_RESERVED;
+
+#ifdef pgprot_noncached
+ if (file->f_flags & O_DSYNC || off >= __pa(high_memory))
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+#endif
+ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot))
+ return -EAGAIN;
- if (mtd->type == MTD_RAM || mtd->type == MTD_ROM)
return 0;
+ }
return -ENOSYS;
#else
return vma->vm_flags & VM_SHARED ? 0 : -ENOSYS;
/*
* MTD device concatenation layer
*
- * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
+ * Copyright © 2002 Robert Kaiser <rkaiser@sysgo.de>
+ * Copyright © 2002-2010 David Woodhouse <dwmw2@infradead.org>
*
* NAND support by Christian Gan <cgan@iders.ca>
*
- * This code is GPL
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#include <linux/kernel.h>
else
size = len;
- err = subdev->lock(subdev, ofs, size);
-
- if (err)
- break;
+ if (subdev->lock) {
+ err = subdev->lock(subdev, ofs, size);
+ if (err)
+ break;
+ } else
+ err = -EOPNOTSUPP;
len -= size;
if (len == 0)
else
size = len;
- err = subdev->unlock(subdev, ofs, size);
-
- if (err)
- break;
+ if (subdev->unlock) {
+ err = subdev->unlock(subdev, ofs, size);
+ if (err)
+ break;
+ } else
+ err = -EOPNOTSUPP;
len -= size;
if (len == 0)
* Core registration and callback routines for MTD
* drivers and users.
*
- * bdi bits are:
- * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2006 Red Hat UK Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#include <linux/module.h>
#include <linux/err.h>
#include <linux/ioctl.h>
#include <linux/init.h>
-#include <linux/mtd/compatmac.h>
#include <linux/proc_fs.h>
#include <linux/idr.h>
#include <linux/backing-dev.h>
/*
* MTD Oops/Panic logger
*
- * Copyright (C) 2007 Nokia Corporation. All rights reserved.
+ * Copyright © 2007 Nokia Corporation. All rights reserved.
*
* Author: Richard Purdie <rpurdie@openedhand.com>
*
/*
* Simple MTD partitioning layer
*
- * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
+ * Copyright © 2000 Nicolas Pitre <nico@fluxnic.net>
+ * Copyright © 2002 Thomas Gleixner <gleixner@linutronix.de>
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
*
- * This code is GPL
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
- * 02-21-2002 Thomas Gleixner <gleixner@autronix.de>
- * added support for read_oob, write_oob
*/
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/mtd/compatmac.h>
/* Our partition linked list */
static LIST_HEAD(mtd_partitions);
return part->master->unlock(part->master, ofs + part->offset, len);
}
+static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ struct mtd_part *part = PART(mtd);
+ if ((len + ofs) > mtd->size)
+ return -EINVAL;
+ return part->master->is_locked(part->master, ofs + part->offset, len);
+}
+
static void part_sync(struct mtd_info *mtd)
{
struct mtd_part *part = PART(mtd);
slave->mtd.lock = part_lock;
if (master->unlock)
slave->mtd.unlock = part_unlock;
+ if (master->is_locked)
+ slave->mtd.is_locked = part_is_locked;
if (master->block_isbad)
slave->mtd.block_isbad = part_block_isbad;
if (master->block_markbad)
/* MTD-based superblock management
*
* Copyright © 2001-2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
* Written by: David Howells <dhowells@redhat.com>
* David Woodhouse <dwmw2@infradead.org>
*
config MTD_NAND_MUSEUM_IDS
bool "Enable chip ids for obsolete ancient NAND devices"
- depends on MTD_NAND
default n
help
Enable this option only when your board has first generation
config MTD_NAND_DENALI_SCRATCH_REG_ADDR
hex "Denali NAND size scratch register address"
default "0xFF108018"
+ depends on MTD_NAND_DENALI
help
Some platforms place the NAND chip size in a scratch register
because (some versions of) the driver aren't able to automatically
config MTD_NAND_OMAP2
tristate "NAND Flash device on OMAP2 and OMAP3"
- depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+ depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
help
Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
config MTD_NAND_OMAP_PREFETCH
bool "GPMC prefetch support for NAND Flash device"
- depends on MTD_NAND && MTD_NAND_OMAP2
+ depends on MTD_NAND_OMAP2
default y
help
The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
config MTD_NAND_BF5XX
tristate "Blackfin on-chip NAND Flash Controller driver"
- depends on (BF54x || BF52x) && MTD_NAND
+ depends on BF54x || BF52x
help
This enables the Blackfin on-chip NAND flash controller
config MTD_NAND_BCM_UMI
tristate "NAND Flash support for BCM Reference Boards"
- depends on ARCH_BCMRING && MTD_NAND
+ depends on ARCH_BCMRING
help
This enables the NAND flash controller on the BCM UMI block.
config MTD_NAND_PXA3xx
tristate "Support for NAND flash devices on PXA3xx"
- depends on MTD_NAND && (PXA3xx || ARCH_MMP)
+ depends on PXA3xx || ARCH_MMP
help
This enables the driver for the NAND flash device found on
PXA3xx processors
config MTD_NAND_CM_X270
tristate "Support for NAND Flash on CM-X270 modules"
- depends on MTD_NAND && MACH_ARMCORE
+ depends on MACH_ARMCORE
config MTD_NAND_PASEMI
tristate "NAND support for PA Semi PWRficient"
- depends on MTD_NAND && PPC_PASEMI
+ depends on PPC_PASEMI
help
Enables support for NAND Flash interface on PA Semi PWRficient
based boards
config MTD_NAND_TMIO
tristate "NAND Flash device on Toshiba Mobile IO Controller"
- depends on MTD_NAND && MFD_TMIO
+ depends on MFD_TMIO
help
Support for NAND flash connected to a Toshiba Mobile IO
Controller in some PDAs, including the Sharp SL6000x.
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
- depends on MTD_NAND
help
This implements a generic NAND driver for on-SOC platform
devices. You will need to provide platform-specific functions
config MTD_ALAUDA
tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
- depends on MTD_NAND && USB
+ depends on USB
help
These two (and possibly other) Alauda-based cardreaders for
SmartMedia and xD allow raw flash access.
config MTD_NAND_ORION
tristate "NAND Flash support for Marvell Orion SoC"
- depends on PLAT_ORION && MTD_NAND
+ depends on PLAT_ORION
help
This enables the NAND flash controller on Orion machines.
config MTD_NAND_FSL_ELBC
tristate "NAND support for Freescale eLBC controllers"
- depends on MTD_NAND && PPC_OF
+ depends on PPC_OF
help
Various Freescale chips, including the 8313, include a NAND Flash
Controller Module with built-in hardware ECC capabilities.
config MTD_NAND_FSL_UPM
tristate "Support for NAND on Freescale UPM"
- depends on MTD_NAND && (PPC_83xx || PPC_85xx)
+ depends on PPC_83xx || PPC_85xx
select FSL_LBC
help
Enables support for NAND Flash chips wired onto Freescale PowerPC
config MTD_NAND_MXC
tristate "MXC NAND support"
- depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
+ depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51
help
This enables the driver for the NAND flash controller on the
MXC processors.
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
- depends on MTD_NAND && (SUPERH || ARCH_SHMOBILE)
+ depends on SUPERH || ARCH_SHMOBILE
help
Several Renesas SuperH CPU has FLCTL. This option enables support
for NAND Flash using FLCTL.
config MTD_NAND_SOCRATES
tristate "Support for NAND on Socrates board"
- depends on MTD_NAND && SOCRATES
+ depends on SOCRATES
help
Enables support for NAND Flash chips wired onto Socrates board.
}
}
-#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
static const char *part_probes[] = { "cmdlinepart", NULL };
#endif
* - DMA supported in ECC_HW
* - YAFFS tested as rootfs in both ECC_HW and ECC_SW
*
- * TODO:
- * Enable JFFS2 over NAND as rootfs
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
if (ctrl & NAND_CLE)
bfin_write_NFC_CMD(cmd);
- else
+ else if (ctrl & NAND_ALE)
bfin_write_NFC_ADDR(cmd);
SSYNC();
}
*/
static int bf5xx_nand_devready(struct mtd_info *mtd)
{
- unsigned short val = bfin_read_NFC_IRQSTAT();
+ unsigned short val = bfin_read_NFC_STAT();
- if ((val & NBUSYIRQ) == NBUSYIRQ)
+ if ((val & NBUSY) == NBUSY)
return 1;
else
return 0;
static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
- struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct bf5xx_nand_platform *plat = info->platform;
- unsigned short page_size = (plat->page_size ? 512 : 256);
+ struct nand_chip *chip = mtd->priv;
int ret;
ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
- /* If page size is 512, correct second 256 bytes */
- if (page_size == 512) {
+ /* If ecc size is 512, correct second 256 bytes */
+ if (chip->ecc.size == 512) {
dat += 256;
- read_ecc += 8;
- calc_ecc += 8;
+ read_ecc += 3;
+ calc_ecc += 3;
ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
}
const u_char *dat, u_char *ecc_code)
{
struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct bf5xx_nand_platform *plat = info->platform;
- u16 page_size = (plat->page_size ? 512 : 256);
+ struct nand_chip *chip = mtd->priv;
u16 ecc0, ecc1;
u32 code[2];
u8 *p;
- /* first 4 bytes ECC code for 256 page size */
+ /* first 3 bytes ECC code for 256 page size */
ecc0 = bfin_read_NFC_ECC0();
ecc1 = bfin_read_NFC_ECC1();
dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
- /* first 3 bytes in ecc_code for 256 page size */
p = (u8 *) code;
memcpy(ecc_code, p, 3);
- /* second 4 bytes ECC code for 512 page size */
- if (page_size == 512) {
+ /* second 3 bytes ECC code for 512 ecc size */
+ if (chip->ecc.size == 512) {
ecc0 = bfin_read_NFC_ECC2();
ecc1 = bfin_read_NFC_ECC3();
code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
uint8_t *buf, int is_read)
{
struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct bf5xx_nand_platform *plat = info->platform;
- unsigned short page_size = (plat->page_size ? 512 : 256);
+ struct nand_chip *chip = mtd->priv;
unsigned short val;
dev_dbg(info->device, " mtd->%p, buf->%p, is_read %d\n",
*/
if (is_read)
invalidate_dcache_range((unsigned int)buf,
- (unsigned int)(buf + page_size));
+ (unsigned int)(buf + chip->ecc.size));
else
flush_dcache_range((unsigned int)buf,
- (unsigned int)(buf + page_size));
+ (unsigned int)(buf + chip->ecc.size));
/*
* This register must be written before each page is
*/
bfin_write_NFC_RST(ECC_RST);
SSYNC();
+ while (bfin_read_NFC_RST() & ECC_RST)
+ cpu_relax();
disable_dma(CH_NFC);
clear_dma_irqstat(CH_NFC);
/* The DMAs have different size on BF52x and BF54x */
#ifdef CONFIG_BF52x
- set_dma_x_count(CH_NFC, (page_size >> 1));
+ set_dma_x_count(CH_NFC, (chip->ecc.size >> 1));
set_dma_x_modify(CH_NFC, 2);
val = DI_EN | WDSIZE_16;
#endif
#ifdef CONFIG_BF54x
- set_dma_x_count(CH_NFC, (page_size >> 2));
+ set_dma_x_count(CH_NFC, (chip->ecc.size >> 2));
set_dma_x_modify(CH_NFC, 4);
val = DI_EN | WDSIZE_32;
#endif
uint8_t *buf, int len)
{
struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct bf5xx_nand_platform *plat = info->platform;
- unsigned short page_size = (plat->page_size ? 512 : 256);
+ struct nand_chip *chip = mtd->priv;
dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len);
- if (len == page_size)
+ if (len == chip->ecc.size)
bf5xx_nand_dma_rw(mtd, buf, 1);
else
bf5xx_nand_read_buf(mtd, buf, len);
const uint8_t *buf, int len)
{
struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct bf5xx_nand_platform *plat = info->platform;
- unsigned short page_size = (plat->page_size ? 512 : 256);
+ struct nand_chip *chip = mtd->priv;
dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len);
- if (len == page_size)
+ if (len == chip->ecc.size)
bf5xx_nand_dma_rw(mtd, (uint8_t *)buf, 0);
else
bf5xx_nand_write_buf(mtd, buf, len);
}
+static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ bf5xx_nand_read_buf(mtd, buf, mtd->writesize);
+ bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+static void bf5xx_nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ bf5xx_nand_write_buf(mtd, buf, mtd->writesize);
+ bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
+
/*
* System initialization functions
*/
/* setup NFC_CTL register */
dev_info(info->device,
- "page_size=%d, data_width=%d, wr_dly=%d, rd_dly=%d\n",
- (plat->page_size ? 512 : 256),
+ "data_width=%d, wr_dly=%d, rd_dly=%d\n",
(plat->data_width ? 16 : 8),
plat->wr_dly, plat->rd_dly);
- val = (plat->page_size << NFC_PG_SIZE_OFFSET) |
+ val = (1 << NFC_PG_SIZE_OFFSET) |
(plat->data_width << NFC_NWIDTH_OFFSET) |
(plat->rd_dly << NFC_RDDLY_OFFSET) |
- (plat->rd_dly << NFC_WRDLY_OFFSET);
+ (plat->wr_dly << NFC_WRDLY_OFFSET);
dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val);
bfin_write_NFC_CTL(val);
return 0;
}
+static int bf5xx_nand_scan(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+
+ ret = nand_scan_ident(mtd, 1);
+ if (ret)
+ return ret;
+
+ if (hardware_ecc) {
+ /*
+ * for nand with page size > 512B, think it as several sections with 512B
+ */
+ if (likely(mtd->writesize >= 512)) {
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 6;
+ } else {
+ chip->ecc.size = 256;
+ chip->ecc.bytes = 3;
+ bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET));
+ SSYNC();
+ }
+ }
+
+ return nand_scan_tail(mtd);
+}
+
/*
* bf5xx_nand_probe
*
chip->badblock_pattern = &bootrom_bbt;
chip->ecc.layout = &bootrom_ecclayout;
#endif
-
- if (plat->page_size == NFC_PG_SIZE_256) {
- chip->ecc.bytes = 3;
- chip->ecc.size = 256;
- } else if (plat->page_size == NFC_PG_SIZE_512) {
- chip->ecc.bytes = 6;
- chip->ecc.size = 512;
- }
-
chip->read_buf = bf5xx_nand_dma_read_buf;
chip->write_buf = bf5xx_nand_dma_write_buf;
chip->ecc.calculate = bf5xx_nand_calculate_ecc;
chip->ecc.correct = bf5xx_nand_correct_data;
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.hwctl = bf5xx_nand_enable_hwecc;
+ chip->ecc.read_page_raw = bf5xx_nand_read_page_raw;
+ chip->ecc.write_page_raw = bf5xx_nand_write_page_raw;
} else {
chip->ecc.mode = NAND_ECC_SOFT;
}
/* scan hardware nand chip and setup mtd info data struct */
- if (nand_scan(mtd, 1)) {
+ if (bf5xx_nand_scan(mtd)) {
err = -ENXIO;
goto out_err_nand_scan;
}
unsigned short ecc10[8];
unsigned short *ecc16;
u32 syndrome[4];
+ u32 ecc_state;
unsigned num_errors, corrected;
+ unsigned long timeo = jiffies + msecs_to_jiffies(100);
/* All bytes 0xff? It's an erased page; ignore its ECC. */
for (i = 0; i < 10; i++) {
*/
davinci_nand_writel(info, NANDFCR_OFFSET,
davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13));
+
+ /*
+ * ECC_STATE field reads 0x3 (Error correction complete) immediately
+ * after setting the 4BITECC_ADD_CALC_START bit. So if you immediately
+ * begin trying to poll for the state, you may fall right out of your
+ * loop without any of the correction calculations having taken place.
+ * The recommendation from the hardware team is to wait till ECC_STATE
+ * reads less than 4, which means ECC HW has entered correction state.
+ */
+ do {
+ ecc_state = (davinci_nand_readl(info,
+ NANDFSR_OFFSET) >> 8) & 0x0f;
+ cpu_relax();
+ } while ((ecc_state < 4) && time_before(jiffies, timeo));
+
for (;;) {
u32 fsr = davinci_nand_readl(info, NANDFSR_OFFSET);
#include <linux/delay.h>
#include <linux/wait.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/mtd/mtd.h>
#include <linux/module.h>
MODULE_LICENSE("GPL");
-/* We define a module parameter that allows the user to override
+/* We define a module parameter that allows the user to override
* the hardware and decide what timing mode should be used.
*/
#define NAND_DEFAULT_TIMINGS -1
static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
module_param(onfi_timing_mode, int, S_IRUGO);
-MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates"
- " use default timings");
+MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
+ " -1 indicates use default timings");
#define DENALI_NAND_NAME "denali-nand"
INTR_STATUS0__RST_COMP | \
INTR_STATUS0__ERASE_COMP)
-/* indicates whether or not the internal value for the flash bank is
- valid or not */
-#define CHIP_SELECT_INVALID -1
+/* indicates whether or not the internal value for the flash bank is
+ * valid or not */
+#define CHIP_SELECT_INVALID -1
#define SUPPORT_8BITECC 1
-/* This macro divides two integers and rounds fractional values up
+/* This macro divides two integers and rounds fractional values up
* to the nearest integer value. */
#define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y)))
#define mtd_to_denali(m) container_of(m, struct denali_nand_info, mtd)
/* These constants are defined by the driver to enable common driver
- configuration options. */
+ * configuration options. */
#define SPARE_ACCESS 0x41
#define MAIN_ACCESS 0x42
#define MAIN_SPARE_ACCESS 0x43
#define ADDR_CYCLE 1
#define STATUS_CYCLE 2
-/* this is a helper macro that allows us to
+/* this is a helper macro that allows us to
* format the bank into the proper bits for the controller */
#define BANK(x) ((x) << 24)
};
-/* these are static lookup tables that give us easy access to
- registers in the NAND controller.
+/* these are static lookup tables that give us easy access to
+ * registers in the NAND controller.
*/
-static const uint32_t intr_status_addresses[4] = {INTR_STATUS0,
- INTR_STATUS1,
- INTR_STATUS2,
+static const uint32_t intr_status_addresses[4] = {INTR_STATUS0,
+ INTR_STATUS1,
+ INTR_STATUS2,
INTR_STATUS3};
static const uint32_t device_reset_banks[4] = {DEVICE_RESET__BANK0,
- DEVICE_RESET__BANK1,
- DEVICE_RESET__BANK2,
- DEVICE_RESET__BANK3};
+ DEVICE_RESET__BANK1,
+ DEVICE_RESET__BANK2,
+ DEVICE_RESET__BANK3};
static const uint32_t operation_timeout[4] = {INTR_STATUS0__TIME_OUT,
- INTR_STATUS1__TIME_OUT,
- INTR_STATUS2__TIME_OUT,
- INTR_STATUS3__TIME_OUT};
+ INTR_STATUS1__TIME_OUT,
+ INTR_STATUS2__TIME_OUT,
+ INTR_STATUS3__TIME_OUT};
static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP,
- INTR_STATUS1__RST_COMP,
- INTR_STATUS2__RST_COMP,
- INTR_STATUS3__RST_COMP};
-
-/* specifies the debug level of the driver */
-static int nand_debug_level = 0;
+ INTR_STATUS1__RST_COMP,
+ INTR_STATUS2__RST_COMP,
+ INTR_STATUS3__RST_COMP};
/* forward declarations */
static void clear_interrupts(struct denali_nand_info *denali);
-static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask);
-static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask);
+static uint32_t wait_for_irq(struct denali_nand_info *denali,
+ uint32_t irq_mask);
+static void denali_irq_enable(struct denali_nand_info *denali,
+ uint32_t int_mask);
static uint32_t read_interrupt_status(struct denali_nand_info *denali);
-#define DEBUG_DENALI 0
-
-/* This is a wrapper for writing to the denali registers.
- * this allows us to create debug information so we can
- * observe how the driver is programming the device.
- * it uses standard linux convention for (val, addr) */
-static void denali_write32(uint32_t value, void *addr)
-{
- iowrite32(value, addr);
-
-#if DEBUG_DENALI
- printk(KERN_ERR "wrote: 0x%x -> 0x%x\n", value, (uint32_t)((uint32_t)addr & 0x1fff));
-#endif
-}
-
-/* Certain operations for the denali NAND controller use an indexed mode to read/write
- data. The operation is performed by writing the address value of the command to
- the device memory followed by the data. This function abstracts this common
- operation.
+/* Certain operations for the denali NAND controller use
+ * an indexed mode to read/write data. The operation is
+ * performed by writing the address value of the command
+ * to the device memory followed by the data. This function
+ * abstracts this common operation.
*/
-static void index_addr(struct denali_nand_info *denali, uint32_t address, uint32_t data)
+static void index_addr(struct denali_nand_info *denali,
+ uint32_t address, uint32_t data)
{
- denali_write32(address, denali->flash_mem);
- denali_write32(data, denali->flash_mem + 0x10);
+ iowrite32(address, denali->flash_mem);
+ iowrite32(data, denali->flash_mem + 0x10);
}
/* Perform an indexed read of the device */
static void index_addr_read_data(struct denali_nand_info *denali,
uint32_t address, uint32_t *pdata)
{
- denali_write32(address, denali->flash_mem);
+ iowrite32(address, denali->flash_mem);
*pdata = ioread32(denali->flash_mem + 0x10);
}
-/* We need to buffer some data for some of the NAND core routines.
+/* We need to buffer some data for some of the NAND core routines.
* The operations manage buffering that data. */
static void reset_buf(struct denali_nand_info *denali)
{
/* initialize the data buffer to store status */
reset_buf(denali);
- /* initiate a device status read */
- cmd = MODE_11 | BANK(denali->flash_bank);
- index_addr(denali, cmd | COMMAND_CYCLE, 0x70);
- denali_write32(cmd | STATUS_CYCLE, denali->flash_mem);
-
- /* update buffer with status value */
- write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10));
-
-#if DEBUG_DENALI
- printk("device reporting status value of 0x%2x\n", denali->buf.buf[0]);
-#endif
+ cmd = ioread32(denali->flash_reg + WRITE_PROTECT);
+ if (cmd)
+ write_byte_to_buf(denali, NAND_STATUS_WP);
+ else
+ write_byte_to_buf(denali, 0);
}
/* resets a specific device connected to the core */
static void reset_bank(struct denali_nand_info *denali)
{
uint32_t irq_status = 0;
- uint32_t irq_mask = reset_complete[denali->flash_bank] |
+ uint32_t irq_mask = reset_complete[denali->flash_bank] |
operation_timeout[denali->flash_bank];
int bank = 0;
clear_interrupts(denali);
bank = device_reset_banks[denali->flash_bank];
- denali_write32(bank, denali->flash_reg + DEVICE_RESET);
+ iowrite32(bank, denali->flash_reg + DEVICE_RESET);
irq_status = wait_for_irq(denali, irq_mask);
-
+
if (irq_status & operation_timeout[denali->flash_bank])
- {
- printk(KERN_ERR "reset bank failed.\n");
- }
+ dev_err(&denali->dev->dev, "reset bank failed.\n");
}
/* Reset the flash controller */
-static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali)
+static uint16_t denali_nand_reset(struct denali_nand_info *denali)
{
uint32_t i;
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++)
- denali_write32(reset_complete[i] | operation_timeout[i],
+ iowrite32(reset_complete[i] | operation_timeout[i],
denali->flash_reg + intr_status_addresses[i]);
for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) {
- denali_write32(device_reset_banks[i], denali->flash_reg + DEVICE_RESET);
- while (!(ioread32(denali->flash_reg + intr_status_addresses[i]) &
+ iowrite32(device_reset_banks[i],
+ denali->flash_reg + DEVICE_RESET);
+ while (!(ioread32(denali->flash_reg +
+ intr_status_addresses[i]) &
(reset_complete[i] | operation_timeout[i])))
- ;
+ cpu_relax();
if (ioread32(denali->flash_reg + intr_status_addresses[i]) &
operation_timeout[i])
- nand_dbg_print(NAND_DBG_WARN,
+ dev_dbg(&denali->dev->dev,
"NAND Reset operation timed out on bank %d\n", i);
}
for (i = 0; i < LLD_MAX_FLASH_BANKS; i++)
- denali_write32(reset_complete[i] | operation_timeout[i],
+ iowrite32(reset_complete[i] | operation_timeout[i],
denali->flash_reg + intr_status_addresses[i]);
return PASS;
}
-/* this routine calculates the ONFI timing values for a given mode and programs
- * the clocking register accordingly. The mode is determined by the get_onfi_nand_para
- routine.
+/* this routine calculates the ONFI timing values for a given mode and
+ * programs the clocking register accordingly. The mode is determined by
+ * the get_onfi_nand_para routine.
*/
-static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali, uint16_t mode)
+static void nand_onfi_timing_set(struct denali_nand_info *denali,
+ uint16_t mode)
{
uint16_t Trea[6] = {40, 30, 25, 20, 20, 16};
uint16_t Trp[6] = {50, 25, 17, 15, 12, 10};
uint16_t acc_clks;
uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
en_lo = CEIL_DIV(Trp[mode], CLK_X);
acc_clks++;
if ((data_invalid - acc_clks * CLK_X) < 2)
- nand_dbg_print(NAND_DBG_WARN, "%s, Line %d: Warning!\n",
+ dev_warn(&denali->dev->dev, "%s, Line %d: Warning!\n",
__FILE__, __LINE__);
addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
(ioread32(denali->flash_reg + DEVICE_ID) == 0x88))
acc_clks = 6;
- denali_write32(acc_clks, denali->flash_reg + ACC_CLKS);
- denali_write32(re_2_we, denali->flash_reg + RE_2_WE);
- denali_write32(re_2_re, denali->flash_reg + RE_2_RE);
- denali_write32(we_2_re, denali->flash_reg + WE_2_RE);
- denali_write32(addr_2_data, denali->flash_reg + ADDR_2_DATA);
- denali_write32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT);
- denali_write32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT);
- denali_write32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
-}
-
-/* configures the initial ECC settings for the controller */
-static void set_ecc_config(struct denali_nand_info *denali)
-{
-#if SUPPORT_8BITECC
- if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) < 4096) ||
- (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) <= 128))
- denali_write32(8, denali->flash_reg + ECC_CORRECTION);
-#endif
-
- if ((ioread32(denali->flash_reg + ECC_CORRECTION) & ECC_CORRECTION__VALUE)
- == 1) {
- denali->dev_info.wECCBytesPerSector = 4;
- denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected;
- denali->dev_info.wNumPageSpareFlag =
- denali->dev_info.wPageSpareSize -
- denali->dev_info.wPageDataSize /
- (ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
- denali->dev_info.wECCBytesPerSector
- - denali->dev_info.wSpareSkipBytes;
- } else {
- denali->dev_info.wECCBytesPerSector =
- (ioread32(denali->flash_reg + ECC_CORRECTION) &
- ECC_CORRECTION__VALUE) * 13 / 8;
- if ((denali->dev_info.wECCBytesPerSector) % 2 == 0)
- denali->dev_info.wECCBytesPerSector += 2;
- else
- denali->dev_info.wECCBytesPerSector += 1;
-
- denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected;
- denali->dev_info.wNumPageSpareFlag = denali->dev_info.wPageSpareSize -
- denali->dev_info.wPageDataSize /
- (ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
- denali->dev_info.wECCBytesPerSector
- - denali->dev_info.wSpareSkipBytes;
- }
+ iowrite32(acc_clks, denali->flash_reg + ACC_CLKS);
+ iowrite32(re_2_we, denali->flash_reg + RE_2_WE);
+ iowrite32(re_2_re, denali->flash_reg + RE_2_RE);
+ iowrite32(we_2_re, denali->flash_reg + WE_2_RE);
+ iowrite32(addr_2_data, denali->flash_reg + ADDR_2_DATA);
+ iowrite32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT);
+ iowrite32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT);
+ iowrite32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
}
/* queries the NAND device to see what ONFI modes it supports. */
static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
{
int i;
- uint16_t blks_lun_l, blks_lun_h, n_of_luns;
- uint32_t blockperlun, id;
-
- denali_write32(DEVICE_RESET__BANK0, denali->flash_reg + DEVICE_RESET);
-
- while (!((ioread32(denali->flash_reg + INTR_STATUS0) &
- INTR_STATUS0__RST_COMP) |
- (ioread32(denali->flash_reg + INTR_STATUS0) &
- INTR_STATUS0__TIME_OUT)))
- ;
-
- if (ioread32(denali->flash_reg + INTR_STATUS0) & INTR_STATUS0__RST_COMP) {
- denali_write32(DEVICE_RESET__BANK1, denali->flash_reg + DEVICE_RESET);
- while (!((ioread32(denali->flash_reg + INTR_STATUS1) &
- INTR_STATUS1__RST_COMP) |
- (ioread32(denali->flash_reg + INTR_STATUS1) &
- INTR_STATUS1__TIME_OUT)))
- ;
-
- if (ioread32(denali->flash_reg + INTR_STATUS1) &
- INTR_STATUS1__RST_COMP) {
- denali_write32(DEVICE_RESET__BANK2,
- denali->flash_reg + DEVICE_RESET);
- while (!((ioread32(denali->flash_reg + INTR_STATUS2) &
- INTR_STATUS2__RST_COMP) |
- (ioread32(denali->flash_reg + INTR_STATUS2) &
- INTR_STATUS2__TIME_OUT)))
- ;
-
- if (ioread32(denali->flash_reg + INTR_STATUS2) &
- INTR_STATUS2__RST_COMP) {
- denali_write32(DEVICE_RESET__BANK3,
- denali->flash_reg + DEVICE_RESET);
- while (!((ioread32(denali->flash_reg + INTR_STATUS3) &
- INTR_STATUS3__RST_COMP) |
- (ioread32(denali->flash_reg + INTR_STATUS3) &
- INTR_STATUS3__TIME_OUT)))
- ;
- } else {
- printk(KERN_ERR "Getting a time out for bank 2!\n");
- }
- } else {
- printk(KERN_ERR "Getting a time out for bank 1!\n");
- }
- }
-
- denali_write32(INTR_STATUS0__TIME_OUT, denali->flash_reg + INTR_STATUS0);
- denali_write32(INTR_STATUS1__TIME_OUT, denali->flash_reg + INTR_STATUS1);
- denali_write32(INTR_STATUS2__TIME_OUT, denali->flash_reg + INTR_STATUS2);
- denali_write32(INTR_STATUS3__TIME_OUT, denali->flash_reg + INTR_STATUS3);
-
- denali->dev_info.wONFIDevFeatures =
- ioread32(denali->flash_reg + ONFI_DEVICE_FEATURES);
- denali->dev_info.wONFIOptCommands =
- ioread32(denali->flash_reg + ONFI_OPTIONAL_COMMANDS);
- denali->dev_info.wONFITimingMode =
- ioread32(denali->flash_reg + ONFI_TIMING_MODE);
- denali->dev_info.wONFIPgmCacheTimingMode =
- ioread32(denali->flash_reg + ONFI_PGM_CACHE_TIMING_MODE);
-
- n_of_luns = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
- ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS;
- blks_lun_l = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L);
- blks_lun_h = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U);
-
- blockperlun = (blks_lun_h << 16) | blks_lun_l;
-
- denali->dev_info.wTotalBlocks = n_of_luns * blockperlun;
-
+ /* we needn't to do a reset here because driver has already
+ * reset all the banks before
+ * */
if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
ONFI_TIMING_MODE__VALUE))
return FAIL;
for (i = 5; i > 0; i--) {
- if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) & (0x01 << i))
+ if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
+ (0x01 << i))
break;
}
- NAND_ONFi_Timing_Mode(denali, i);
-
- index_addr(denali, MODE_11 | 0, 0x90);
- index_addr(denali, MODE_11 | 1, 0);
-
- for (i = 0; i < 3; i++)
- index_addr_read_data(denali, MODE_11 | 2, &id);
-
- nand_dbg_print(NAND_DBG_DEBUG, "3rd ID: 0x%x\n", id);
-
- denali->dev_info.MLCDevice = id & 0x0C;
+ nand_onfi_timing_set(denali, i);
/* By now, all the ONFI devices we know support the page cache */
/* rw feature. So here we enable the pipeline_rw_ahead feature */
return PASS;
}
-static void get_samsung_nand_para(struct denali_nand_info *denali)
+static void get_samsung_nand_para(struct denali_nand_info *denali,
+ uint8_t device_id)
{
- uint8_t no_of_planes;
- uint32_t blk_size;
- uint64_t plane_size, capacity;
- uint32_t id_bytes[5];
- int i;
-
- index_addr(denali, (uint32_t)(MODE_11 | 0), 0x90);
- index_addr(denali, (uint32_t)(MODE_11 | 1), 0);
- for (i = 0; i < 5; i++)
- index_addr_read_data(denali, (uint32_t)(MODE_11 | 2), &id_bytes[i]);
-
- nand_dbg_print(NAND_DBG_DEBUG,
- "ID bytes: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
- id_bytes[0], id_bytes[1], id_bytes[2],
- id_bytes[3], id_bytes[4]);
-
- if ((id_bytes[1] & 0xff) == 0xd3) { /* Samsung K9WAG08U1A */
+ if (device_id == 0xd3) { /* Samsung K9WAG08U1A */
/* Set timing register values according to datasheet */
- denali_write32(5, denali->flash_reg + ACC_CLKS);
- denali_write32(20, denali->flash_reg + RE_2_WE);
- denali_write32(12, denali->flash_reg + WE_2_RE);
- denali_write32(14, denali->flash_reg + ADDR_2_DATA);
- denali_write32(3, denali->flash_reg + RDWR_EN_LO_CNT);
- denali_write32(2, denali->flash_reg + RDWR_EN_HI_CNT);
- denali_write32(2, denali->flash_reg + CS_SETUP_CNT);
+ iowrite32(5, denali->flash_reg + ACC_CLKS);
+ iowrite32(20, denali->flash_reg + RE_2_WE);
+ iowrite32(12, denali->flash_reg + WE_2_RE);
+ iowrite32(14, denali->flash_reg + ADDR_2_DATA);
+ iowrite32(3, denali->flash_reg + RDWR_EN_LO_CNT);
+ iowrite32(2, denali->flash_reg + RDWR_EN_HI_CNT);
+ iowrite32(2, denali->flash_reg + CS_SETUP_CNT);
}
-
- no_of_planes = 1 << ((id_bytes[4] & 0x0c) >> 2);
- plane_size = (uint64_t)64 << ((id_bytes[4] & 0x70) >> 4);
- blk_size = 64 << ((ioread32(denali->flash_reg + DEVICE_PARAM_1) & 0x30) >> 4);
- capacity = (uint64_t)128 * plane_size * no_of_planes;
-
- do_div(capacity, blk_size);
- denali->dev_info.wTotalBlocks = capacity;
}
static void get_toshiba_nand_para(struct denali_nand_info *denali)
{
- void __iomem *scratch_reg;
uint32_t tmp;
/* Workaround to fix a controller bug which reports a wrong */
/* spare area size for some kind of Toshiba NAND device */
if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
(ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) {
- denali_write32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+ iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
tmp = ioread32(denali->flash_reg + DEVICES_CONNECTED) *
ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
- denali_write32(tmp, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+ iowrite32(tmp,
+ denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
#if SUPPORT_15BITECC
- denali_write32(15, denali->flash_reg + ECC_CORRECTION);
+ iowrite32(15, denali->flash_reg + ECC_CORRECTION);
#elif SUPPORT_8BITECC
- denali_write32(8, denali->flash_reg + ECC_CORRECTION);
+ iowrite32(8, denali->flash_reg + ECC_CORRECTION);
#endif
}
-
- /* As Toshiba NAND can not provide it's block number, */
- /* so here we need user to provide the correct block */
- /* number in a scratch register before the Linux NAND */
- /* driver is loaded. If no valid value found in the scratch */
- /* register, then we use default block number value */
- scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
- if (!scratch_reg) {
- printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
- __FILE__, __LINE__);
- denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
- } else {
- nand_dbg_print(NAND_DBG_WARN,
- "Spectra: ioremap reg address: 0x%p\n", scratch_reg);
- denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg);
- if (denali->dev_info.wTotalBlocks < 512)
- denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
- iounmap(scratch_reg);
- }
}
-static void get_hynix_nand_para(struct denali_nand_info *denali)
+static void get_hynix_nand_para(struct denali_nand_info *denali,
+ uint8_t device_id)
{
- void __iomem *scratch_reg;
uint32_t main_size, spare_size;
- switch (denali->dev_info.wDeviceID) {
+ switch (device_id) {
case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
- denali_write32(128, denali->flash_reg + PAGES_PER_BLOCK);
- denali_write32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
- denali_write32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
- main_size = 4096 * ioread32(denali->flash_reg + DEVICES_CONNECTED);
- spare_size = 224 * ioread32(denali->flash_reg + DEVICES_CONNECTED);
- denali_write32(main_size, denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
- denali_write32(spare_size, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
- denali_write32(0, denali->flash_reg + DEVICE_WIDTH);
+ iowrite32(128, denali->flash_reg + PAGES_PER_BLOCK);
+ iowrite32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
+ iowrite32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+ main_size = 4096 *
+ ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ spare_size = 224 *
+ ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ iowrite32(main_size,
+ denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
+ iowrite32(spare_size,
+ denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+ iowrite32(0, denali->flash_reg + DEVICE_WIDTH);
#if SUPPORT_15BITECC
- denali_write32(15, denali->flash_reg + ECC_CORRECTION);
+ iowrite32(15, denali->flash_reg + ECC_CORRECTION);
#elif SUPPORT_8BITECC
- denali_write32(8, denali->flash_reg + ECC_CORRECTION);
+ iowrite32(8, denali->flash_reg + ECC_CORRECTION);
#endif
- denali->dev_info.MLCDevice = 1;
break;
default:
- nand_dbg_print(NAND_DBG_WARN,
+ dev_warn(&denali->dev->dev,
"Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
"Will use default parameter values instead.\n",
- denali->dev_info.wDeviceID);
- }
-
- scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
- if (!scratch_reg) {
- printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
- __FILE__, __LINE__);
- denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
- } else {
- nand_dbg_print(NAND_DBG_WARN,
- "Spectra: ioremap reg address: 0x%p\n", scratch_reg);
- denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg);
- if (denali->dev_info.wTotalBlocks < 512)
- denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
- iounmap(scratch_reg);
+ device_id);
}
}
/* determines how many NAND chips are connected to the controller. Note for
- Intel CE4100 devices we don't support more than one device.
+ * Intel CE4100 devices we don't support more than one device.
*/
static void find_valid_banks(struct denali_nand_info *denali)
{
for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) {
index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90);
index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0);
- index_addr_read_data(denali, (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
+ index_addr_read_data(denali,
+ (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
- nand_dbg_print(NAND_DBG_DEBUG,
+ dev_dbg(&denali->dev->dev,
"Return 1st ID for bank[%d]: %x\n", i, id[i]);
if (i == 0) {
}
}
- if (denali->platform == INTEL_CE4100)
- {
+ if (denali->platform == INTEL_CE4100) {
/* Platform limitations of the CE4100 device limit
* users to a single chip solution for NAND.
- * Multichip support is not enabled.
- */
- if (denali->total_used_banks != 1)
- {
- printk(KERN_ERR "Sorry, Intel CE4100 only supports "
+ * Multichip support is not enabled.
+ */
+ if (denali->total_used_banks != 1) {
+ dev_err(&denali->dev->dev,
+ "Sorry, Intel CE4100 only supports "
"a single NAND device.\n");
BUG();
}
}
- nand_dbg_print(NAND_DBG_DEBUG,
+ dev_dbg(&denali->dev->dev,
"denali->total_used_banks: %d\n", denali->total_used_banks);
}
static void detect_partition_feature(struct denali_nand_info *denali)
{
+ /* For MRST platform, denali->fwblks represent the
+ * number of blocks firmware is taken,
+ * FW is in protect partition and MTD driver has no
+ * permission to access it. So let driver know how many
+ * blocks it can't touch.
+ * */
if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
if ((ioread32(denali->flash_reg + PERM_SRC_ID_1) &
PERM_SRC_ID_1__SRCID) == SPECTRA_PARTITION_ID) {
- denali->dev_info.wSpectraStartBlock =
+ denali->fwblks =
((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
MIN_MAX_BANK_1__MIN_VALUE) *
- denali->dev_info.wTotalBlocks)
+ denali->blksperchip)
+
(ioread32(denali->flash_reg + MIN_BLK_ADDR_1) &
MIN_BLK_ADDR_1__VALUE);
-
- denali->dev_info.wSpectraEndBlock =
- (((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
- MIN_MAX_BANK_1__MAX_VALUE) >> 2) *
- denali->dev_info.wTotalBlocks)
- +
- (ioread32(denali->flash_reg + MAX_BLK_ADDR_1) &
- MAX_BLK_ADDR_1__VALUE);
-
- denali->dev_info.wTotalBlocks *= denali->total_used_banks;
-
- if (denali->dev_info.wSpectraEndBlock >=
- denali->dev_info.wTotalBlocks) {
- denali->dev_info.wSpectraEndBlock =
- denali->dev_info.wTotalBlocks - 1;
- }
-
- denali->dev_info.wDataBlockNum =
- denali->dev_info.wSpectraEndBlock -
- denali->dev_info.wSpectraStartBlock + 1;
- } else {
- denali->dev_info.wTotalBlocks *= denali->total_used_banks;
- denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
- denali->dev_info.wSpectraEndBlock =
- denali->dev_info.wTotalBlocks - 1;
- denali->dev_info.wDataBlockNum =
- denali->dev_info.wSpectraEndBlock -
- denali->dev_info.wSpectraStartBlock + 1;
- }
- } else {
- denali->dev_info.wTotalBlocks *= denali->total_used_banks;
- denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
- denali->dev_info.wSpectraEndBlock = denali->dev_info.wTotalBlocks - 1;
- denali->dev_info.wDataBlockNum =
- denali->dev_info.wSpectraEndBlock -
- denali->dev_info.wSpectraStartBlock + 1;
- }
+ } else
+ denali->fwblks = SPECTRA_START_BLOCK;
+ } else
+ denali->fwblks = SPECTRA_START_BLOCK;
}
-static void dump_device_info(struct denali_nand_info *denali)
-{
- nand_dbg_print(NAND_DBG_DEBUG, "denali->dev_info:\n");
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceMaker: 0x%x\n",
- denali->dev_info.wDeviceMaker);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceID: 0x%x\n",
- denali->dev_info.wDeviceID);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceType: 0x%x\n",
- denali->dev_info.wDeviceType);
- nand_dbg_print(NAND_DBG_DEBUG, "SpectraStartBlock: %d\n",
- denali->dev_info.wSpectraStartBlock);
- nand_dbg_print(NAND_DBG_DEBUG, "SpectraEndBlock: %d\n",
- denali->dev_info.wSpectraEndBlock);
- nand_dbg_print(NAND_DBG_DEBUG, "TotalBlocks: %d\n",
- denali->dev_info.wTotalBlocks);
- nand_dbg_print(NAND_DBG_DEBUG, "PagesPerBlock: %d\n",
- denali->dev_info.wPagesPerBlock);
- nand_dbg_print(NAND_DBG_DEBUG, "PageSize: %d\n",
- denali->dev_info.wPageSize);
- nand_dbg_print(NAND_DBG_DEBUG, "PageDataSize: %d\n",
- denali->dev_info.wPageDataSize);
- nand_dbg_print(NAND_DBG_DEBUG, "PageSpareSize: %d\n",
- denali->dev_info.wPageSpareSize);
- nand_dbg_print(NAND_DBG_DEBUG, "NumPageSpareFlag: %d\n",
- denali->dev_info.wNumPageSpareFlag);
- nand_dbg_print(NAND_DBG_DEBUG, "ECCBytesPerSector: %d\n",
- denali->dev_info.wECCBytesPerSector);
- nand_dbg_print(NAND_DBG_DEBUG, "BlockSize: %d\n",
- denali->dev_info.wBlockSize);
- nand_dbg_print(NAND_DBG_DEBUG, "BlockDataSize: %d\n",
- denali->dev_info.wBlockDataSize);
- nand_dbg_print(NAND_DBG_DEBUG, "DataBlockNum: %d\n",
- denali->dev_info.wDataBlockNum);
- nand_dbg_print(NAND_DBG_DEBUG, "PlaneNum: %d\n",
- denali->dev_info.bPlaneNum);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceMainAreaSize: %d\n",
- denali->dev_info.wDeviceMainAreaSize);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceSpareAreaSize: %d\n",
- denali->dev_info.wDeviceSpareAreaSize);
- nand_dbg_print(NAND_DBG_DEBUG, "DevicesConnected: %d\n",
- denali->dev_info.wDevicesConnected);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceWidth: %d\n",
- denali->dev_info.wDeviceWidth);
- nand_dbg_print(NAND_DBG_DEBUG, "HWRevision: 0x%x\n",
- denali->dev_info.wHWRevision);
- nand_dbg_print(NAND_DBG_DEBUG, "HWFeatures: 0x%x\n",
- denali->dev_info.wHWFeatures);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFIDevFeatures: 0x%x\n",
- denali->dev_info.wONFIDevFeatures);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFIOptCommands: 0x%x\n",
- denali->dev_info.wONFIOptCommands);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFITimingMode: 0x%x\n",
- denali->dev_info.wONFITimingMode);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFIPgmCacheTimingMode: 0x%x\n",
- denali->dev_info.wONFIPgmCacheTimingMode);
- nand_dbg_print(NAND_DBG_DEBUG, "MLCDevice: %s\n",
- denali->dev_info.MLCDevice ? "Yes" : "No");
- nand_dbg_print(NAND_DBG_DEBUG, "SpareSkipBytes: %d\n",
- denali->dev_info.wSpareSkipBytes);
- nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageNumber: %d\n",
- denali->dev_info.nBitsInPageNumber);
- nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageDataSize: %d\n",
- denali->dev_info.nBitsInPageDataSize);
- nand_dbg_print(NAND_DBG_DEBUG, "BitsInBlockDataSize: %d\n",
- denali->dev_info.nBitsInBlockDataSize);
-}
-
-static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
+static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
{
uint16_t status = PASS;
- uint8_t no_of_planes;
-
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
-
- denali->dev_info.wDeviceMaker = ioread32(denali->flash_reg + MANUFACTURER_ID);
- denali->dev_info.wDeviceID = ioread32(denali->flash_reg + DEVICE_ID);
- denali->dev_info.bDeviceParam0 = ioread32(denali->flash_reg + DEVICE_PARAM_0);
- denali->dev_info.bDeviceParam1 = ioread32(denali->flash_reg + DEVICE_PARAM_1);
- denali->dev_info.bDeviceParam2 = ioread32(denali->flash_reg + DEVICE_PARAM_2);
-
- denali->dev_info.MLCDevice = ioread32(denali->flash_reg + DEVICE_PARAM_0) & 0x0c;
+ uint32_t id_bytes[5], addr;
+ uint8_t i, maf_id, device_id;
+
+ dev_dbg(&denali->dev->dev,
+ "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
+
+ /* Use read id method to get device ID and other
+ * params. For some NAND chips, controller can't
+ * report the correct device ID by reading from
+ * DEVICE_ID register
+ * */
+ addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
+ index_addr(denali, (uint32_t)addr | 0, 0x90);
+ index_addr(denali, (uint32_t)addr | 1, 0);
+ for (i = 0; i < 5; i++)
+ index_addr_read_data(denali, addr | 2, &id_bytes[i]);
+ maf_id = id_bytes[0];
+ device_id = id_bytes[1];
if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */
if (FAIL == get_onfi_nand_para(denali))
return FAIL;
- } else if (denali->dev_info.wDeviceMaker == 0xEC) { /* Samsung NAND */
- get_samsung_nand_para(denali);
- } else if (denali->dev_info.wDeviceMaker == 0x98) { /* Toshiba NAND */
+ } else if (maf_id == 0xEC) { /* Samsung NAND */
+ get_samsung_nand_para(denali, device_id);
+ } else if (maf_id == 0x98) { /* Toshiba NAND */
get_toshiba_nand_para(denali);
- } else if (denali->dev_info.wDeviceMaker == 0xAD) { /* Hynix NAND */
- get_hynix_nand_para(denali);
- } else {
- denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+ } else if (maf_id == 0xAD) { /* Hynix NAND */
+ get_hynix_nand_para(denali, device_id);
}
- nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
- "acc_clks: %d, re_2_we: %d, we_2_re: %d,"
- "addr_2_data: %d, rdwr_en_lo_cnt: %d, "
+ dev_info(&denali->dev->dev,
+ "Dump timing register values:"
+ "acc_clks: %d, re_2_we: %d, re_2_re: %d\n"
+ "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n"
"rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
ioread32(denali->flash_reg + ACC_CLKS),
ioread32(denali->flash_reg + RE_2_WE),
+ ioread32(denali->flash_reg + RE_2_RE),
ioread32(denali->flash_reg + WE_2_RE),
ioread32(denali->flash_reg + ADDR_2_DATA),
ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
ioread32(denali->flash_reg + CS_SETUP_CNT));
- denali->dev_info.wHWRevision = ioread32(denali->flash_reg + REVISION);
- denali->dev_info.wHWFeatures = ioread32(denali->flash_reg + FEATURES);
-
- denali->dev_info.wDeviceMainAreaSize =
- ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
- denali->dev_info.wDeviceSpareAreaSize =
- ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
-
- denali->dev_info.wPageDataSize =
- ioread32(denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
-
- /* Note: When using the Micon 4K NAND device, the controller will report
- * Page Spare Size as 216 bytes. But Micron's Spec say it's 218 bytes.
- * And if force set it to 218 bytes, the controller can not work
- * correctly. So just let it be. But keep in mind that this bug may
- * cause
- * other problems in future. - Yunpeng 2008-10-10
- */
- denali->dev_info.wPageSpareSize =
- ioread32(denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
-
- denali->dev_info.wPagesPerBlock = ioread32(denali->flash_reg + PAGES_PER_BLOCK);
-
- denali->dev_info.wPageSize =
- denali->dev_info.wPageDataSize + denali->dev_info.wPageSpareSize;
- denali->dev_info.wBlockSize =
- denali->dev_info.wPageSize * denali->dev_info.wPagesPerBlock;
- denali->dev_info.wBlockDataSize =
- denali->dev_info.wPagesPerBlock * denali->dev_info.wPageDataSize;
-
- denali->dev_info.wDeviceWidth = ioread32(denali->flash_reg + DEVICE_WIDTH);
- denali->dev_info.wDeviceType =
- ((ioread32(denali->flash_reg + DEVICE_WIDTH) > 0) ? 16 : 8);
-
- denali->dev_info.wDevicesConnected = ioread32(denali->flash_reg + DEVICES_CONNECTED);
-
- denali->dev_info.wSpareSkipBytes =
- ioread32(denali->flash_reg + SPARE_AREA_SKIP_BYTES) *
- denali->dev_info.wDevicesConnected;
-
- denali->dev_info.nBitsInPageNumber =
- ilog2(denali->dev_info.wPagesPerBlock);
- denali->dev_info.nBitsInPageDataSize =
- ilog2(denali->dev_info.wPageDataSize);
- denali->dev_info.nBitsInBlockDataSize =
- ilog2(denali->dev_info.wBlockDataSize);
-
- set_ecc_config(denali);
-
- no_of_planes = ioread32(denali->flash_reg + NUMBER_OF_PLANES) &
- NUMBER_OF_PLANES__VALUE;
-
- switch (no_of_planes) {
- case 0:
- case 1:
- case 3:
- case 7:
- denali->dev_info.bPlaneNum = no_of_planes + 1;
- break;
- default:
- status = FAIL;
- break;
- }
-
find_valid_banks(denali);
detect_partition_feature(denali);
- dump_device_info(denali);
-
/* If the user specified to override the default timings
- * with a specific ONFI mode, we apply those changes here.
+ * with a specific ONFI mode, we apply those changes here.
*/
if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
- {
- NAND_ONFi_Timing_Mode(denali, onfi_timing_mode);
- }
+ nand_onfi_timing_set(denali, onfi_timing_mode);
return status;
}
-static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali,
+static void denali_set_intr_modes(struct denali_nand_info *denali,
uint16_t INT_ENABLE)
{
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
if (INT_ENABLE)
- denali_write32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
+ iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
else
- denali_write32(0, denali->flash_reg + GLOBAL_INT_ENABLE);
+ iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE);
}
/* validation function to verify that the controlling software is making
- a valid request
+ * a valid request
*/
static inline bool is_flash_bank_valid(int flash_bank)
{
- return (flash_bank >= 0 && flash_bank < 4);
+ return (flash_bank >= 0 && flash_bank < 4);
}
static void denali_irq_init(struct denali_nand_info *denali)
uint32_t int_mask = 0;
/* Disable global interrupts */
- NAND_LLD_Enable_Disable_Interrupts(denali, false);
+ denali_set_intr_modes(denali, false);
int_mask = DENALI_IRQ_ALL;
/* Clear all status bits */
- denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS0);
- denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS1);
- denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS2);
- denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS3);
+ iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS0);
+ iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS1);
+ iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS2);
+ iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS3);
denali_irq_enable(denali, int_mask);
}
static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
{
- NAND_LLD_Enable_Disable_Interrupts(denali, false);
+ denali_set_intr_modes(denali, false);
free_irq(irqnum, denali);
}
-static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask)
+static void denali_irq_enable(struct denali_nand_info *denali,
+ uint32_t int_mask)
{
- denali_write32(int_mask, denali->flash_reg + INTR_EN0);
- denali_write32(int_mask, denali->flash_reg + INTR_EN1);
- denali_write32(int_mask, denali->flash_reg + INTR_EN2);
- denali_write32(int_mask, denali->flash_reg + INTR_EN3);
+ iowrite32(int_mask, denali->flash_reg + INTR_EN0);
+ iowrite32(int_mask, denali->flash_reg + INTR_EN1);
+ iowrite32(int_mask, denali->flash_reg + INTR_EN2);
+ iowrite32(int_mask, denali->flash_reg + INTR_EN3);
}
/* This function only returns when an interrupt that this driver cares about
- * occurs. This is to reduce the overhead of servicing interrupts
+ * occurs. This is to reduce the overhead of servicing interrupts
*/
static inline uint32_t denali_irq_detected(struct denali_nand_info *denali)
{
- return (read_interrupt_status(denali) & DENALI_IRQ_ALL);
+ return read_interrupt_status(denali) & DENALI_IRQ_ALL;
}
/* Interrupts are cleared by writing a 1 to the appropriate status bit */
-static inline void clear_interrupt(struct denali_nand_info *denali, uint32_t irq_mask)
+static inline void clear_interrupt(struct denali_nand_info *denali,
+ uint32_t irq_mask)
{
uint32_t intr_status_reg = 0;
intr_status_reg = intr_status_addresses[denali->flash_bank];
- denali_write32(irq_mask, denali->flash_reg + intr_status_reg);
+ iowrite32(irq_mask, denali->flash_reg + intr_status_reg);
}
static void clear_interrupts(struct denali_nand_info *denali)
spin_lock_irq(&denali->irq_lock);
status = read_interrupt_status(denali);
-
-#if DEBUG_DENALI
- denali->irq_debug_array[denali->idx++] = 0x30000000 | status;
- denali->idx %= 32;
-#endif
+ clear_interrupt(denali, status);
denali->irq_status = 0x0;
spin_unlock_irq(&denali->irq_lock);
return ioread32(denali->flash_reg + intr_status_reg);
}
-#if DEBUG_DENALI
-static void print_irq_log(struct denali_nand_info *denali)
-{
- int i = 0;
-
- printk("ISR debug log index = %X\n", denali->idx);
- for (i = 0; i < 32; i++)
- {
- printk("%08X: %08X\n", i, denali->irq_debug_array[i]);
- }
-}
-#endif
-
-/* This is the interrupt service routine. It handles all interrupts
- * sent to this device. Note that on CE4100, this is a shared
- * interrupt.
+/* This is the interrupt service routine. It handles all interrupts
+ * sent to this device. Note that on CE4100, this is a shared
+ * interrupt.
*/
static irqreturn_t denali_isr(int irq, void *dev_id)
{
spin_lock(&denali->irq_lock);
- /* check to see if a valid NAND chip has
- * been selected.
+ /* check to see if a valid NAND chip has
+ * been selected.
*/
- if (is_flash_bank_valid(denali->flash_bank))
- {
- /* check to see if controller generated
+ if (is_flash_bank_valid(denali->flash_bank)) {
+ /* check to see if controller generated
* the interrupt, since this is a shared interrupt */
- if ((irq_status = denali_irq_detected(denali)) != 0)
- {
-#if DEBUG_DENALI
- denali->irq_debug_array[denali->idx++] = 0x10000000 | irq_status;
- denali->idx %= 32;
-
- printk("IRQ status = 0x%04x\n", irq_status);
-#endif
+ irq_status = denali_irq_detected(denali);
+ if (irq_status != 0) {
/* handle interrupt */
/* first acknowledge it */
clear_interrupt(denali, irq_status);
bool retry = false;
unsigned long timeout = msecs_to_jiffies(1000);
- do
- {
-#if DEBUG_DENALI
- printk("waiting for 0x%x\n", irq_mask);
-#endif
- comp_res = wait_for_completion_timeout(&denali->complete, timeout);
+ do {
+ comp_res =
+ wait_for_completion_timeout(&denali->complete, timeout);
spin_lock_irq(&denali->irq_lock);
intr_status = denali->irq_status;
-#if DEBUG_DENALI
- denali->irq_debug_array[denali->idx++] = 0x20000000 | (irq_mask << 16) | intr_status;
- denali->idx %= 32;
-#endif
-
- if (intr_status & irq_mask)
- {
+ if (intr_status & irq_mask) {
denali->irq_status &= ~irq_mask;
spin_unlock_irq(&denali->irq_lock);
-#if DEBUG_DENALI
- if (retry) printk("status on retry = 0x%x\n", intr_status);
-#endif
/* our interrupt was detected */
break;
- }
- else
- {
- /* these are not the interrupts you are looking for -
- need to wait again */
+ } else {
+ /* these are not the interrupts you are looking for -
+ * need to wait again */
spin_unlock_irq(&denali->irq_lock);
-#if DEBUG_DENALI
- print_irq_log(denali);
- printk("received irq nobody cared: irq_status = 0x%x,"
- " irq_mask = 0x%x, timeout = %ld\n", intr_status, irq_mask, comp_res);
-#endif
retry = true;
}
} while (comp_res != 0);
- if (comp_res == 0)
- {
+ if (comp_res == 0) {
/* timeout */
- printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n",
- intr_status, irq_mask);
+ printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n",
+ intr_status, irq_mask);
intr_status = 0;
}
return intr_status;
}
-/* This helper function setups the registers for ECC and whether or not
- the spare area will be transfered. */
-static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
+/* This helper function setups the registers for ECC and whether or not
+ * the spare area will be transfered. */
+static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
bool transfer_spare)
{
- int ecc_en_flag = 0, transfer_spare_flag = 0;
+ int ecc_en_flag = 0, transfer_spare_flag = 0;
/* set ECC, transfer spare bits if needed */
ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0;
/* Enable spare area/ECC per user's request. */
- denali_write32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
- denali_write32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
+ iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
+ iowrite32(transfer_spare_flag,
+ denali->flash_reg + TRANSFER_SPARE_REG);
}
-/* sends a pipeline command operation to the controller. See the Denali NAND
- controller's user guide for more information (section 4.2.3.6).
+/* sends a pipeline command operation to the controller. See the Denali NAND
+ * controller's user guide for more information (section 4.2.3.6).
*/
-static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en,
- bool transfer_spare, int access_type,
- int op)
+static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
+ bool ecc_en,
+ bool transfer_spare,
+ int access_type,
+ int op)
{
int status = PASS;
- uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0,
+ uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0,
irq_mask = 0;
- if (op == DENALI_READ) irq_mask = INTR_STATUS0__LOAD_COMP;
- else if (op == DENALI_WRITE) irq_mask = 0;
- else BUG();
+ if (op == DENALI_READ)
+ irq_mask = INTR_STATUS0__LOAD_COMP;
+ else if (op == DENALI_WRITE)
+ irq_mask = 0;
+ else
+ BUG();
setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
-#if DEBUG_DENALI
- spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] = 0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) | (access_type << 4);
- denali->idx %= 32;
- spin_unlock_irq(&denali->irq_lock);
-#endif
-
-
/* clear interrupts */
- clear_interrupts(denali);
+ clear_interrupts(denali);
addr = BANK(denali->flash_bank) | denali->page;
- if (op == DENALI_WRITE && access_type != SPARE_ACCESS)
- {
- cmd = MODE_01 | addr;
- denali_write32(cmd, denali->flash_mem);
- }
- else if (op == DENALI_WRITE && access_type == SPARE_ACCESS)
- {
+ if (op == DENALI_WRITE && access_type != SPARE_ACCESS) {
+ cmd = MODE_01 | addr;
+ iowrite32(cmd, denali->flash_mem);
+ } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) {
/* read spare area */
- cmd = MODE_10 | addr;
+ cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, access_type);
- cmd = MODE_01 | addr;
- denali_write32(cmd, denali->flash_mem);
- }
- else if (op == DENALI_READ)
- {
+ cmd = MODE_01 | addr;
+ iowrite32(cmd, denali->flash_mem);
+ } else if (op == DENALI_READ) {
/* setup page read request for access type */
- cmd = MODE_10 | addr;
+ cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, access_type);
/* page 33 of the NAND controller spec indicates we should not
- use the pipeline commands in Spare area only mode. So we
+ use the pipeline commands in Spare area only mode. So we
don't.
*/
- if (access_type == SPARE_ACCESS)
- {
+ if (access_type == SPARE_ACCESS) {
cmd = MODE_01 | addr;
- denali_write32(cmd, denali->flash_mem);
- }
- else
- {
- index_addr(denali, (uint32_t)cmd, 0x2000 | op | page_count);
-
- /* wait for command to be accepted
- * can always use status0 bit as the mask is identical for each
+ iowrite32(cmd, denali->flash_mem);
+ } else {
+ index_addr(denali, (uint32_t)cmd,
+ 0x2000 | op | page_count);
+
+ /* wait for command to be accepted
+ * can always use status0 bit as the
+ * mask is identical for each
* bank. */
irq_status = wait_for_irq(denali, irq_mask);
- if (irq_status == 0)
- {
- printk(KERN_ERR "cmd, page, addr on timeout "
- "(0x%x, 0x%x, 0x%x)\n", cmd, denali->page, addr);
+ if (irq_status == 0) {
+ dev_err(&denali->dev->dev,
+ "cmd, page, addr on timeout "
+ "(0x%x, 0x%x, 0x%x)\n",
+ cmd, denali->page, addr);
status = FAIL;
- }
- else
- {
+ } else {
cmd = MODE_01 | addr;
- denali_write32(cmd, denali->flash_mem);
+ iowrite32(cmd, denali->flash_mem);
}
}
}
}
/* helper function that simply writes a buffer to the flash */
-static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_t *buf,
- int len)
+static int write_data_to_flash_mem(struct denali_nand_info *denali,
+ const uint8_t *buf,
+ int len)
{
uint32_t i = 0, *buf32;
- /* verify that the len is a multiple of 4. see comment in
- * read_data_from_flash_mem() */
+ /* verify that the len is a multiple of 4. see comment in
+ * read_data_from_flash_mem() */
BUG_ON((len % 4) != 0);
/* write the data to the flash memory */
buf32 = (uint32_t *)buf;
for (i = 0; i < len / 4; i++)
- {
- denali_write32(*buf32++, denali->flash_mem + 0x10);
- }
- return i*4; /* intent is to return the number of bytes read */
+ iowrite32(*buf32++, denali->flash_mem + 0x10);
+ return i*4; /* intent is to return the number of bytes read */
}
/* helper function that simply reads a buffer from the flash */
-static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *buf,
- int len)
+static int read_data_from_flash_mem(struct denali_nand_info *denali,
+ uint8_t *buf,
+ int len)
{
uint32_t i = 0, *buf32;
/* we assume that len will be a multiple of 4, if not
* it would be nice to know about it ASAP rather than
- * have random failures...
- *
- * This assumption is based on the fact that this
- * function is designed to be used to read flash pages,
+ * have random failures...
+ * This assumption is based on the fact that this
+ * function is designed to be used to read flash pages,
* which are typically multiples of 4...
*/
/* transfer the data from the flash */
buf32 = (uint32_t *)buf;
for (i = 0; i < len / 4; i++)
- {
*buf32++ = ioread32(denali->flash_mem + 0x10);
- }
- return i*4; /* intent is to return the number of bytes read */
+ return i*4; /* intent is to return the number of bytes read */
}
/* writes OOB data to the device */
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
uint32_t irq_status = 0;
- uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP |
+ uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP |
INTR_STATUS0__PROGRAM_FAIL;
int status = 0;
denali->page = page;
- if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS,
- DENALI_WRITE) == PASS)
- {
+ if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS,
+ DENALI_WRITE) == PASS) {
write_data_to_flash_mem(denali, buf, mtd->oobsize);
-#if DEBUG_DENALI
- spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] = 0x80000000 | mtd->oobsize;
- denali->idx %= 32;
- spin_unlock_irq(&denali->irq_lock);
-#endif
-
-
/* wait for operation to complete */
irq_status = wait_for_irq(denali, irq_mask);
- if (irq_status == 0)
- {
- printk(KERN_ERR "OOB write failed\n");
+ if (irq_status == 0) {
+ dev_err(&denali->dev->dev, "OOB write failed\n");
status = -EIO;
}
- }
- else
- {
- printk(KERN_ERR "unable to send pipeline command\n");
- status = -EIO;
+ } else {
+ dev_err(&denali->dev->dev, "unable to send pipeline command\n");
+ status = -EIO;
}
return status;
}
static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t irq_mask = INTR_STATUS0__LOAD_COMP, irq_status = 0, addr = 0x0, cmd = 0x0;
+ uint32_t irq_mask = INTR_STATUS0__LOAD_COMP,
+ irq_status = 0, addr = 0x0, cmd = 0x0;
denali->page = page;
-#if DEBUG_DENALI
- printk("read_oob %d\n", page);
-#endif
- if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
- DENALI_READ) == PASS)
- {
- read_data_from_flash_mem(denali, buf, mtd->oobsize);
+ if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
+ DENALI_READ) == PASS) {
+ read_data_from_flash_mem(denali, buf, mtd->oobsize);
- /* wait for command to be accepted
+ /* wait for command to be accepted
* can always use status0 bit as the mask is identical for each
* bank. */
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0)
- {
- printk(KERN_ERR "page on OOB timeout %d\n", denali->page);
- }
+ dev_err(&denali->dev->dev, "page on OOB timeout %d\n",
+ denali->page);
/* We set the device back to MAIN_ACCESS here as I observed
* instability with the controller if you do a block erase
* and the last transaction was a SPARE_ACCESS. Block erase
* is reliable (according to the MTD test infrastructure)
- * if you are in MAIN_ACCESS.
+ * if you are in MAIN_ACCESS.
*/
addr = BANK(denali->flash_bank) | denali->page;
- cmd = MODE_10 | addr;
+ cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, MAIN_ACCESS);
-
-#if DEBUG_DENALI
- spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] = 0x60000000 | mtd->oobsize;
- denali->idx %= 32;
- spin_unlock_irq(&denali->irq_lock);
-#endif
}
}
-/* this function examines buffers to see if they contain data that
+/* this function examines buffers to see if they contain data that
* indicate that the buffer is part of an erased region of flash.
*/
bool is_erased(uint8_t *buf, int len)
{
int i = 0;
for (i = 0; i < len; i++)
- {
if (buf[i] != 0xFF)
- {
return false;
- }
- }
return true;
}
#define ECC_SECTOR_SIZE 512
#define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
#define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET))
#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
-#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO))
-#define ECC_ERR_DEVICE(x) ((x) & ERR_CORRECTION_INFO__DEVICE_NR >> 8)
+#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO__ERROR_TYPE))
+#define ECC_ERR_DEVICE(x) (((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8)
#define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
-static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
- uint8_t *oobbuf, uint32_t irq_status)
+static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
+ uint32_t irq_status)
{
bool check_erased_page = false;
- if (irq_status & INTR_STATUS0__ECC_ERR)
- {
+ if (irq_status & INTR_STATUS0__ECC_ERR) {
/* read the ECC errors. we'll ignore them for now */
uint32_t err_address = 0, err_correction_info = 0;
uint32_t err_byte = 0, err_sector = 0, err_device = 0;
uint32_t err_correction_value = 0;
+ denali_set_intr_modes(denali, false);
- do
- {
- err_address = ioread32(denali->flash_reg +
+ do {
+ err_address = ioread32(denali->flash_reg +
ECC_ERROR_ADDRESS);
err_sector = ECC_SECTOR(err_address);
err_byte = ECC_BYTE(err_address);
-
- err_correction_info = ioread32(denali->flash_reg +
+ err_correction_info = ioread32(denali->flash_reg +
ERR_CORRECTION_INFO);
- err_correction_value =
+ err_correction_value =
ECC_CORRECTION_VALUE(err_correction_info);
err_device = ECC_ERR_DEVICE(err_correction_info);
- if (ECC_ERROR_CORRECTABLE(err_correction_info))
- {
- /* offset in our buffer is computed as:
- sector number * sector size + offset in
- sector
- */
- int offset = err_sector * ECC_SECTOR_SIZE +
- err_byte;
- if (offset < denali->mtd.writesize)
- {
+ if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
+ /* If err_byte is larger than ECC_SECTOR_SIZE,
+ * means error happend in OOB, so we ignore
+ * it. It's no need for us to correct it
+ * err_device is represented the NAND error
+ * bits are happened in if there are more
+ * than one NAND connected.
+ * */
+ if (err_byte < ECC_SECTOR_SIZE) {
+ int offset;
+ offset = (err_sector *
+ ECC_SECTOR_SIZE +
+ err_byte) *
+ denali->devnum +
+ err_device;
/* correct the ECC error */
buf[offset] ^= err_correction_value;
denali->mtd.ecc_stats.corrected++;
}
- else
- {
- /* bummer, couldn't correct the error */
- printk(KERN_ERR "ECC offset invalid\n");
- denali->mtd.ecc_stats.failed++;
- }
- }
- else
- {
- /* if the error is not correctable, need to
- * look at the page to see if it is an erased page.
- * if so, then it's not a real ECC error */
+ } else {
+ /* if the error is not correctable, need to
+ * look at the page to see if it is an erased
+ * page. if so, then it's not a real ECC error
+ * */
check_erased_page = true;
}
-
-#if DEBUG_DENALI
- printk("Detected ECC error in page %d: err_addr = 0x%08x,"
- " info to fix is 0x%08x\n", denali->page, err_address,
- err_correction_info);
-#endif
} while (!ECC_LAST_ERR(err_correction_info));
+ /* Once handle all ecc errors, controller will triger
+ * a ECC_TRANSACTION_DONE interrupt, so here just wait
+ * for a while for this interrupt
+ * */
+ while (!(read_interrupt_status(denali) &
+ INTR_STATUS0__ECC_TRANSACTION_DONE))
+ cpu_relax();
+ clear_interrupts(denali);
+ denali_set_intr_modes(denali, true);
}
return check_erased_page;
}
{
uint32_t reg_val = 0x0;
- if (en) reg_val = DMA_ENABLE__FLAG;
+ if (en)
+ reg_val = DMA_ENABLE__FLAG;
- denali_write32(reg_val, denali->flash_reg + DMA_ENABLE);
+ iowrite32(reg_val, denali->flash_reg + DMA_ENABLE);
ioread32(denali->flash_reg + DMA_ENABLE);
}
index_addr(denali, mode | 0x14000, 0x2400);
}
-/* writes a page. user specifies type, and this function handles the
- configuration details. */
-static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
+/* writes a page. user specifies type, and this function handles the
+ * configuration details. */
+static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, bool raw_xfer)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
size_t size = denali->mtd.writesize + denali->mtd.oobsize;
uint32_t irq_status = 0;
- uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP |
+ uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP |
INTR_STATUS0__PROGRAM_FAIL;
/* if it is a raw xfer, we want to disable ecc, and send
/* copy buffer into DMA buffer */
memcpy(denali->buf.buf, buf, mtd->writesize);
- if (raw_xfer)
- {
+ if (raw_xfer) {
/* transfer the data to the spare area */
- memcpy(denali->buf.buf + mtd->writesize,
- chip->oob_poi,
- mtd->oobsize);
+ memcpy(denali->buf.buf + mtd->writesize,
+ chip->oob_poi,
+ mtd->oobsize);
}
pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_TODEVICE);
clear_interrupts(denali);
- denali_enable_dma(denali, true);
+ denali_enable_dma(denali, true);
denali_setup_dma(denali, DENALI_WRITE);
/* wait for operation to complete */
irq_status = wait_for_irq(denali, irq_mask);
- if (irq_status == 0)
- {
- printk(KERN_ERR "timeout on write_page (type = %d)\n", raw_xfer);
- denali->status =
- (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? NAND_STATUS_FAIL :
- PASS;
+ if (irq_status == 0) {
+ dev_err(&denali->dev->dev,
+ "timeout on write_page (type = %d)\n",
+ raw_xfer);
+ denali->status =
+ (irq_status & INTR_STATUS0__PROGRAM_FAIL) ?
+ NAND_STATUS_FAIL : PASS;
}
- denali_enable_dma(denali, false);
+ denali_enable_dma(denali, false);
pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_TODEVICE);
}
/* NAND core entry points */
-/* this is the callback that the NAND core calls to write a page. Since
- writing a page with ECC or without is similar, all the work is done
- by write_page above. */
-static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+/* this is the callback that the NAND core calls to write a page. Since
+ * writing a page with ECC or without is similar, all the work is done
+ * by write_page above.
+ * */
+static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
{
/* for regular page writes, we let HW handle all the ECC
- * data written to the device. */
+ * data written to the device. */
write_page(mtd, chip, buf, false);
}
-/* This is the callback that the NAND core calls to write a page without ECC.
- raw access is similiar to ECC page writes, so all the work is done in the
- write_page() function above.
+/* This is the callback that the NAND core calls to write a page without ECC.
+ * raw access is similiar to ECC page writes, so all the work is done in the
+ * write_page() function above.
*/
-static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
{
- /* for raw page writes, we want to disable ECC and simply write
+ /* for raw page writes, we want to disable ECC and simply write
whatever data is in the buffer. */
write_page(mtd, chip, buf, true);
}
-static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
int page)
{
- return write_oob_data(mtd, chip->oob_poi, page);
+ return write_oob_data(mtd, chip->oob_poi, page);
}
-static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
int page, int sndcmd)
{
read_oob_data(mtd, chip->oob_poi, page);
- return 0; /* notify NAND core to send command to
- * NAND device. */
+ return 0; /* notify NAND core to send command to
+ NAND device. */
}
static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
size_t size = denali->mtd.writesize + denali->mtd.oobsize;
uint32_t irq_status = 0;
- uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE |
+ uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE |
INTR_STATUS0__ECC_ERR;
bool check_erased_page = false;
+ if (page != denali->page) {
+ dev_err(&denali->dev->dev, "IN %s: page %d is not"
+ " equal to denali->page %d, investigate!!",
+ __func__, page, denali->page);
+ BUG();
+ }
+
setup_ecc_for_xfer(denali, true, false);
denali_enable_dma(denali, true);
pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
memcpy(buf, denali->buf.buf, mtd->writesize);
-
- check_erased_page = handle_ecc(denali, buf, chip->oob_poi, irq_status);
+
+ check_erased_page = handle_ecc(denali, buf, irq_status);
denali_enable_dma(denali, false);
- if (check_erased_page)
- {
+ if (check_erased_page) {
read_oob_data(&denali->mtd, chip->oob_poi, denali->page);
/* check ECC failures that may have occurred on erased pages */
- if (check_erased_page)
- {
+ if (check_erased_page) {
if (!is_erased(buf, denali->mtd.writesize))
- {
denali->mtd.ecc_stats.failed++;
- }
if (!is_erased(buf, denali->mtd.oobsize))
- {
denali->mtd.ecc_stats.failed++;
- }
- }
+ }
}
return 0;
}
uint32_t irq_status = 0;
uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP;
-
+
+ if (page != denali->page) {
+ dev_err(&denali->dev->dev, "IN %s: page %d is not"
+ " equal to denali->page %d, investigate!!",
+ __func__, page, denali->page);
+ BUG();
+ }
+
setup_ecc_for_xfer(denali, false, true);
denali_enable_dma(denali, true);
uint8_t result = 0xff;
if (denali->buf.head < denali->buf.tail)
- {
result = denali->buf.buf[denali->buf.head++];
- }
-#if DEBUG_DENALI
- printk("read byte -> 0x%02x\n", result);
-#endif
return result;
}
static void denali_select_chip(struct mtd_info *mtd, int chip)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
-#if DEBUG_DENALI
- printk("denali select chip %d\n", chip);
-#endif
+
spin_lock_irq(&denali->irq_lock);
denali->flash_bank = chip;
spin_unlock_irq(&denali->irq_lock);
int status = denali->status;
denali->status = 0;
-#if DEBUG_DENALI
- printk("waitfunc %d\n", status);
-#endif
return status;
}
uint32_t cmd = 0x0, irq_status = 0;
-#if DEBUG_DENALI
- printk("erase page: %d\n", page);
-#endif
/* clear interrupts */
- clear_interrupts(denali);
+ clear_interrupts(denali);
/* setup page read request for access type */
cmd = MODE_10 | BANK(denali->flash_bank) | page;
index_addr(denali, (uint32_t)cmd, 0x1);
/* wait for erase to complete or failure to occur */
- irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP |
+ irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP |
INTR_STATUS0__ERASE_FAIL);
- denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ? NAND_STATUS_FAIL :
- PASS;
+ denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ?
+ NAND_STATUS_FAIL : PASS;
}
-static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
+static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint32_t addr, id;
+ int i;
-#if DEBUG_DENALI
- printk("cmdfunc: 0x%x %d %d\n", cmd, col, page);
-#endif
- switch (cmd)
- {
- case NAND_CMD_PAGEPROG:
- break;
- case NAND_CMD_STATUS:
- read_status(denali);
- break;
- case NAND_CMD_READID:
- reset_buf(denali);
- if (denali->flash_bank < denali->total_used_banks)
- {
- /* write manufacturer information into nand
- buffer for NAND subsystem to fetch.
- */
- write_byte_to_buf(denali, denali->dev_info.wDeviceMaker);
- write_byte_to_buf(denali, denali->dev_info.wDeviceID);
- write_byte_to_buf(denali, denali->dev_info.bDeviceParam0);
- write_byte_to_buf(denali, denali->dev_info.bDeviceParam1);
- write_byte_to_buf(denali, denali->dev_info.bDeviceParam2);
- }
- else
- {
- int i;
- for (i = 0; i < 5; i++)
- write_byte_to_buf(denali, 0xff);
- }
- break;
- case NAND_CMD_READ0:
- case NAND_CMD_SEQIN:
- denali->page = page;
- break;
- case NAND_CMD_RESET:
- reset_bank(denali);
- break;
- case NAND_CMD_READOOB:
- /* TODO: Read OOB data */
- break;
- default:
- printk(KERN_ERR ": unsupported command received 0x%x\n", cmd);
- break;
+ switch (cmd) {
+ case NAND_CMD_PAGEPROG:
+ break;
+ case NAND_CMD_STATUS:
+ read_status(denali);
+ break;
+ case NAND_CMD_READID:
+ reset_buf(denali);
+ /*sometimes ManufactureId read from register is not right
+ * e.g. some of Micron MT29F32G08QAA MLC NAND chips
+ * So here we send READID cmd to NAND insteand
+ * */
+ addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
+ index_addr(denali, (uint32_t)addr | 0, 0x90);
+ index_addr(denali, (uint32_t)addr | 1, 0);
+ for (i = 0; i < 5; i++) {
+ index_addr_read_data(denali,
+ (uint32_t)addr | 2,
+ &id);
+ write_byte_to_buf(denali, id);
+ }
+ break;
+ case NAND_CMD_READ0:
+ case NAND_CMD_SEQIN:
+ denali->page = page;
+ break;
+ case NAND_CMD_RESET:
+ reset_bank(denali);
+ break;
+ case NAND_CMD_READOOB:
+ /* TODO: Read OOB data */
+ break;
+ default:
+ printk(KERN_ERR ": unsupported command"
+ " received 0x%x\n", cmd);
+ break;
}
}
/* stubs for ECC functions not used by the NAND core */
-static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
+static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
uint8_t *ecc_code)
{
- printk(KERN_ERR "denali_ecc_calculate called unexpectedly\n");
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ dev_err(&denali->dev->dev,
+ "denali_ecc_calculate called unexpectedly\n");
BUG();
return -EIO;
}
-static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
+static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
- printk(KERN_ERR "denali_ecc_correct called unexpectedly\n");
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ dev_err(&denali->dev->dev,
+ "denali_ecc_correct called unexpectedly\n");
BUG();
return -EIO;
}
static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
{
- printk(KERN_ERR "denali_ecc_hwctl called unexpectedly\n");
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ dev_err(&denali->dev->dev,
+ "denali_ecc_hwctl called unexpectedly\n");
BUG();
}
/* end NAND core entry points */
/* Initialization code to bring the device up to a known good state */
static void denali_hw_init(struct denali_nand_info *denali)
{
- denali_irq_init(denali);
- NAND_Flash_Reset(denali);
- denali_write32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
- denali_write32(CHIP_EN_DONT_CARE__FLAG, denali->flash_reg + CHIP_ENABLE_DONT_CARE);
-
- denali_write32(0x0, denali->flash_reg + SPARE_AREA_SKIP_BYTES);
- denali_write32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
+ /* tell driver how many bit controller will skip before
+ * writing ECC code in OOB, this register may be already
+ * set by firmware. So we read this value out.
+ * if this value is 0, just let it be.
+ * */
+ denali->bbtskipbytes = ioread32(denali->flash_reg +
+ SPARE_AREA_SKIP_BYTES);
+ denali_nand_reset(denali);
+ iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
+ iowrite32(CHIP_EN_DONT_CARE__FLAG,
+ denali->flash_reg + CHIP_ENABLE_DONT_CARE);
+
+ iowrite32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
/* Should set value for these registers when init */
- denali_write32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
- denali_write32(1, denali->flash_reg + ECC_ENABLE);
+ iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
+ iowrite32(1, denali->flash_reg + ECC_ENABLE);
+ denali_nand_timing_set(denali);
+ denali_irq_init(denali);
}
-/* ECC layout for SLC devices. Denali spec indicates SLC fixed at 4 bytes */
-#define ECC_BYTES_SLC 4 * (2048 / ECC_SECTOR_SIZE)
-static struct nand_ecclayout nand_oob_slc = {
- .eccbytes = 4,
- .eccpos = { 0, 1, 2, 3 }, /* not used */
- .oobfree = {{
- .offset = ECC_BYTES_SLC,
- .length = 64 - ECC_BYTES_SLC
- }}
+/* Althogh controller spec said SLC ECC is forceb to be 4bit,
+ * but denali controller in MRST only support 15bit and 8bit ECC
+ * correction
+ * */
+#define ECC_8BITS 14
+static struct nand_ecclayout nand_8bit_oob = {
+ .eccbytes = 14,
};
-#define ECC_BYTES_MLC 14 * (2048 / ECC_SECTOR_SIZE)
-static struct nand_ecclayout nand_oob_mlc_14bit = {
- .eccbytes = 14,
- .eccpos = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* not used */
- .oobfree = {{
- .offset = ECC_BYTES_MLC,
- .length = 64 - ECC_BYTES_MLC
- }}
+#define ECC_15BITS 26
+static struct nand_ecclayout nand_15bit_oob = {
+ .eccbytes = 26,
};
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
denali->idx = 0;
/* setup interrupt handler */
- /* the completion object will be used to notify
+ /* the completion object will be used to notify
* the callee that the interrupt is done */
init_completion(&denali->complete);
/* the spinlock will be used to synchronize the ISR
- * with any element that might be access shared
+ * with any element that might be access shared
* data (interrupt status) */
spin_lock_init(&denali->irq_lock);
unsigned long csr_len, mem_len;
struct denali_nand_info *denali;
- nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
-
denali = kzalloc(sizeof(*denali), GFP_KERNEL);
if (!denali)
return -ENOMEM;
ret = pci_enable_device(dev);
if (ret) {
printk(KERN_ERR "Spectra: pci_enable_device failed.\n");
- goto failed_enable;
+ goto failed_alloc_memery;
}
if (id->driver_data == INTEL_CE4100) {
- /* Due to a silicon limitation, we can only support
- * ONFI timing mode 1 and below.
- */
- if (onfi_timing_mode < -1 || onfi_timing_mode > 1)
- {
- printk("Intel CE4100 only supports ONFI timing mode 1 "
- "or below\n");
+ /* Due to a silicon limitation, we can only support
+ * ONFI timing mode 1 and below.
+ */
+ if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
+ printk(KERN_ERR "Intel CE4100 only supports"
+ " ONFI timing mode 1 or below\n");
ret = -EINVAL;
- goto failed_enable;
+ goto failed_enable_dev;
}
denali->platform = INTEL_CE4100;
mem_base = pci_resource_start(dev, 0);
} else {
denali->platform = INTEL_MRST;
csr_base = pci_resource_start(dev, 0);
- csr_len = pci_resource_start(dev, 0);
+ csr_len = pci_resource_len(dev, 0);
mem_base = pci_resource_start(dev, 1);
mem_len = pci_resource_len(dev, 1);
if (!mem_len) {
mem_base = csr_base + csr_len;
mem_len = csr_len;
- nand_dbg_print(NAND_DBG_WARN,
- "Spectra: No second BAR for PCI device; assuming %08Lx\n",
- (uint64_t)csr_base);
}
}
/* Is 32-bit DMA supported? */
ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
- if (ret)
- {
+ if (ret) {
printk(KERN_ERR "Spectra: no usable DMA configuration\n");
- goto failed_enable;
+ goto failed_enable_dev;
}
- denali->buf.dma_buf = pci_map_single(dev, denali->buf.buf, DENALI_BUF_SIZE,
- PCI_DMA_BIDIRECTIONAL);
-
- if (pci_dma_mapping_error(dev, denali->buf.dma_buf))
- {
- printk(KERN_ERR "Spectra: failed to map DMA buffer\n");
- goto failed_enable;
+ denali->buf.dma_buf =
+ pci_map_single(dev, denali->buf.buf,
+ DENALI_BUF_SIZE,
+ PCI_DMA_BIDIRECTIONAL);
+
+ if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) {
+ dev_err(&dev->dev, "Spectra: failed to map DMA buffer\n");
+ goto failed_enable_dev;
}
pci_set_master(dev);
denali->dev = dev;
+ denali->mtd.dev.parent = &dev->dev;
ret = pci_request_regions(dev, DENALI_NAND_NAME);
if (ret) {
printk(KERN_ERR "Spectra: Unable to request memory regions\n");
- goto failed_req_csr;
+ goto failed_dma_map;
}
denali->flash_reg = ioremap_nocache(csr_base, csr_len);
if (!denali->flash_reg) {
printk(KERN_ERR "Spectra: Unable to remap memory region\n");
ret = -ENOMEM;
- goto failed_remap_csr;
+ goto failed_req_regions;
}
- nand_dbg_print(NAND_DBG_DEBUG, "Spectra: CSR 0x%08Lx -> 0x%p (0x%lx)\n",
- (uint64_t)csr_base, denali->flash_reg, csr_len);
denali->flash_mem = ioremap_nocache(mem_base, mem_len);
if (!denali->flash_mem) {
printk(KERN_ERR "Spectra: ioremap_nocache failed!");
- iounmap(denali->flash_reg);
ret = -ENOMEM;
- goto failed_remap_csr;
+ goto failed_remap_reg;
}
- nand_dbg_print(NAND_DBG_WARN,
- "Spectra: Remapped flash base address: "
- "0x%p, len: %ld\n",
- denali->flash_mem, csr_len);
-
denali_hw_init(denali);
denali_drv_init(denali);
- nand_dbg_print(NAND_DBG_DEBUG, "Spectra: IRQ %d\n", dev->irq);
+ /* denali_isr register is done after all the hardware
+ * initilization is finished*/
if (request_irq(dev->irq, denali_isr, IRQF_SHARED,
DENALI_NAND_NAME, denali)) {
printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
ret = -ENODEV;
- goto failed_request_irq;
+ goto failed_remap_mem;
}
/* now that our ISR is registered, we can enable interrupts */
- NAND_LLD_Enable_Disable_Interrupts(denali, true);
+ denali_set_intr_modes(denali, true);
pci_set_drvdata(dev, denali);
- NAND_Read_Device_ID(denali);
-
- /* MTD supported page sizes vary by kernel. We validate our
- kernel supports the device here.
- */
- if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE)
- {
- ret = -ENODEV;
- printk(KERN_ERR "Spectra: device size not supported by this "
- "version of MTD.");
- goto failed_nand;
- }
-
- nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
- "acc_clks: %d, re_2_we: %d, we_2_re: %d,"
- "addr_2_data: %d, rdwr_en_lo_cnt: %d, "
- "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
- ioread32(denali->flash_reg + ACC_CLKS),
- ioread32(denali->flash_reg + RE_2_WE),
- ioread32(denali->flash_reg + WE_2_RE),
- ioread32(denali->flash_reg + ADDR_2_DATA),
- ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
- ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
- ioread32(denali->flash_reg + CS_SETUP_CNT));
-
- denali->mtd.name = "Denali NAND";
+ denali->mtd.name = "denali-nand";
denali->mtd.owner = THIS_MODULE;
denali->mtd.priv = &denali->nand;
denali->nand.read_byte = denali_read_byte;
denali->nand.waitfunc = denali_waitfunc;
- /* scan for NAND devices attached to the controller
+ /* scan for NAND devices attached to the controller
* this is the first stage in a two step process to register
- * with the nand subsystem */
- if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL))
- {
+ * with the nand subsystem */
+ if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL)) {
ret = -ENXIO;
- goto failed_nand;
+ goto failed_req_irq;
}
-
- /* second stage of the NAND scan
- * this stage requires information regarding ECC and
- * bad block management. */
+
+ /* MTD supported page sizes vary by kernel. We validate our
+ * kernel supports the device here.
+ */
+ if (denali->mtd.writesize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) {
+ ret = -ENODEV;
+ printk(KERN_ERR "Spectra: device size not supported by this "
+ "version of MTD.");
+ goto failed_req_irq;
+ }
+
+ /* support for multi nand
+ * MTD known nothing about multi nand,
+ * so we should tell it the real pagesize
+ * and anything necessery
+ */
+ denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ denali->nand.chipsize <<= (denali->devnum - 1);
+ denali->nand.page_shift += (denali->devnum - 1);
+ denali->nand.pagemask = (denali->nand.chipsize >>
+ denali->nand.page_shift) - 1;
+ denali->nand.bbt_erase_shift += (denali->devnum - 1);
+ denali->nand.phys_erase_shift = denali->nand.bbt_erase_shift;
+ denali->nand.chip_shift += (denali->devnum - 1);
+ denali->mtd.writesize <<= (denali->devnum - 1);
+ denali->mtd.oobsize <<= (denali->devnum - 1);
+ denali->mtd.erasesize <<= (denali->devnum - 1);
+ denali->mtd.size = denali->nand.numchips * denali->nand.chipsize;
+ denali->bbtskipbytes *= denali->devnum;
+
+ /* second stage of the NAND scan
+ * this stage requires information regarding ECC and
+ * bad block management. */
/* Bad block management */
denali->nand.bbt_td = &bbt_main_descr;
denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
- if (denali->dev_info.MLCDevice)
- {
- denali->nand.ecc.layout = &nand_oob_mlc_14bit;
- denali->nand.ecc.bytes = ECC_BYTES_MLC;
- }
- else /* SLC */
- {
- denali->nand.ecc.layout = &nand_oob_slc;
- denali->nand.ecc.bytes = ECC_BYTES_SLC;
+ /* Denali Controller only support 15bit and 8bit ECC in MRST,
+ * so just let controller do 15bit ECC for MLC and 8bit ECC for
+ * SLC if possible.
+ * */
+ if (denali->nand.cellinfo & 0xc &&
+ (denali->mtd.oobsize > (denali->bbtskipbytes +
+ ECC_15BITS * (denali->mtd.writesize /
+ ECC_SECTOR_SIZE)))) {
+ /* if MLC OOB size is large enough, use 15bit ECC*/
+ denali->nand.ecc.layout = &nand_15bit_oob;
+ denali->nand.ecc.bytes = ECC_15BITS;
+ iowrite32(15, denali->flash_reg + ECC_CORRECTION);
+ } else if (denali->mtd.oobsize < (denali->bbtskipbytes +
+ ECC_8BITS * (denali->mtd.writesize /
+ ECC_SECTOR_SIZE))) {
+ printk(KERN_ERR "Your NAND chip OOB is not large enough to"
+ " contain 8bit ECC correction codes");
+ goto failed_req_irq;
+ } else {
+ denali->nand.ecc.layout = &nand_8bit_oob;
+ denali->nand.ecc.bytes = ECC_8BITS;
+ iowrite32(8, denali->flash_reg + ECC_CORRECTION);
}
- /* These functions are required by the NAND core framework, otherwise,
- the NAND core will assert. However, we don't need them, so we'll stub
- them out. */
+ denali->nand.ecc.bytes *= denali->devnum;
+ denali->nand.ecc.layout->eccbytes *=
+ denali->mtd.writesize / ECC_SECTOR_SIZE;
+ denali->nand.ecc.layout->oobfree[0].offset =
+ denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes;
+ denali->nand.ecc.layout->oobfree[0].length =
+ denali->mtd.oobsize - denali->nand.ecc.layout->eccbytes -
+ denali->bbtskipbytes;
+
+ /* Let driver know the total blocks number and
+ * how many blocks contained by each nand chip.
+ * blksperchip will help driver to know how many
+ * blocks is taken by FW.
+ * */
+ denali->totalblks = denali->mtd.size >>
+ denali->nand.phys_erase_shift;
+ denali->blksperchip = denali->totalblks / denali->nand.numchips;
+
+ /* These functions are required by the NAND core framework, otherwise,
+ * the NAND core will assert. However, we don't need them, so we'll stub
+ * them out. */
denali->nand.ecc.calculate = denali_ecc_calculate;
denali->nand.ecc.correct = denali_ecc_correct;
denali->nand.ecc.hwctl = denali_ecc_hwctl;
/* override the default read operations */
- denali->nand.ecc.size = denali->mtd.writesize;
+ denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum;
denali->nand.ecc.read_page = denali_read_page;
denali->nand.ecc.read_page_raw = denali_read_page_raw;
denali->nand.ecc.write_page = denali_write_page;
denali->nand.ecc.write_oob = denali_write_oob;
denali->nand.erase_cmd = denali_erase;
- if (nand_scan_tail(&denali->mtd))
- {
+ if (nand_scan_tail(&denali->mtd)) {
ret = -ENXIO;
- goto failed_nand;
+ goto failed_req_irq;
}
ret = add_mtd_device(&denali->mtd);
if (ret) {
- printk(KERN_ERR "Spectra: Failed to register MTD device: %d\n", ret);
- goto failed_nand;
+ dev_err(&dev->dev, "Spectra: Failed to register MTD: %d\n",
+ ret);
+ goto failed_req_irq;
}
return 0;
- failed_nand:
+failed_req_irq:
denali_irq_cleanup(dev->irq, denali);
- failed_request_irq:
- iounmap(denali->flash_reg);
+failed_remap_mem:
iounmap(denali->flash_mem);
- failed_remap_csr:
+failed_remap_reg:
+ iounmap(denali->flash_reg);
+failed_req_regions:
pci_release_regions(dev);
- failed_req_csr:
- pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+failed_dma_map:
+ pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
PCI_DMA_BIDIRECTIONAL);
- failed_enable:
+failed_enable_dev:
+ pci_disable_device(dev);
+failed_alloc_memery:
kfree(denali);
return ret;
}
{
struct denali_nand_info *denali = pci_get_drvdata(dev);
- nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
-
nand_release(&denali->mtd);
del_mtd_device(&denali->mtd);
iounmap(denali->flash_mem);
pci_release_regions(dev);
pci_disable_device(dev);
- pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+ pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
PCI_DMA_BIDIRECTIONAL);
pci_set_drvdata(dev, NULL);
kfree(denali);
static int __devinit denali_init(void)
{
- printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n", __DATE__, __TIME__);
+ printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n",
+ __DATE__, __TIME__);
return pci_register_driver(&denali_pci_driver);
}
*
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/nand.h>
#define DEVICE_RESET 0x0
#define DEVICE_RESET__BANK0 0x0001
#define TRANSFER_SPARE_REG__FLAG 0x0001
#define LOAD_WAIT_CNT 0x20
-#define LOAD_WAIT_CNT__VALUE 0xffff
+#define LOAD_WAIT_CNT__VALUE 0xffff
#define PROGRAM_WAIT_CNT 0x30
#define PROGRAM_WAIT_CNT__VALUE 0xffff
#define RE_2_WE 0x120
#define RE_2_WE__VALUE 0x003f
-#define ACC_CLKS 0x130
+#define ACC_CLKS 0x130
#define ACC_CLKS__VALUE 0x000f
#define NUMBER_OF_PLANES 0x140
#define DEVICES_CONNECTED 0x250
#define DEVICES_CONNECTED__VALUE 0x0007
-#define DIE_MASK 0x260
+#define DIE_MASK 0x260
#define DIE_MASK__VALUE 0x00ff
#define FIRST_BLOCK_OF_NEXT_PLANE 0x270
#define RE_2_RE 0x290
#define RE_2_RE__VALUE 0x003f
-#define MANUFACTURER_ID 0x300
+#define MANUFACTURER_ID 0x300
#define MANUFACTURER_ID__VALUE 0x00ff
#define DEVICE_ID 0x310
#define LOGICAL_PAGE_SPARE_SIZE 0x360
#define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff
-#define REVISION 0x370
+#define REVISION 0x370
#define REVISION__VALUE 0xffff
#define ONFI_DEVICE_FEATURES 0x380
#define ONFI_DEVICE_FEATURES__VALUE 0x003f
-#define ONFI_OPTIONAL_COMMANDS 0x390
+#define ONFI_OPTIONAL_COMMANDS 0x390
#define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f
#define ONFI_TIMING_MODE 0x3a0
#define FEATURES 0x3f0
#define FEATURES__N_BANKS 0x0003
#define FEATURES__ECC_MAX_ERR 0x003c
-#define FEATURES__DMA 0x0040
+#define FEATURES__DMA 0x0040
#define FEATURES__CMD_DMA 0x0080
#define FEATURES__PARTITION 0x0100
#define FEATURES__XDMA_SIDEBAND 0x0200
#define FEATURES__GPREG 0x0400
-#define FEATURES__INDEX_ADDR 0x0800
+#define FEATURES__INDEX_ADDR 0x0800
#define TRANSFER_MODE 0x400
#define TRANSFER_MODE__VALUE 0x0003
#define INTR_EN0__DMA_CMD_COMP 0x0004
#define INTR_EN0__TIME_OUT 0x0008
#define INTR_EN0__PROGRAM_FAIL 0x0010
-#define INTR_EN0__ERASE_FAIL 0x0020
+#define INTR_EN0__ERASE_FAIL 0x0020
#define INTR_EN0__LOAD_COMP 0x0040
#define INTR_EN0__PROGRAM_COMP 0x0080
-#define INTR_EN0__ERASE_COMP 0x0100
+#define INTR_EN0__ERASE_COMP 0x0100
#define INTR_EN0__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN0__LOCKED_BLK 0x0400
+#define INTR_EN0__LOCKED_BLK 0x0400
#define INTR_EN0__UNSUP_CMD 0x0800
#define INTR_EN0__INT_ACT 0x1000
#define INTR_EN0__RST_COMP 0x2000
#define ERR_PAGE_ADDR0 0x440
#define ERR_PAGE_ADDR0__VALUE 0xffff
-#define ERR_BLOCK_ADDR0 0x450
+#define ERR_BLOCK_ADDR0 0x450
#define ERR_BLOCK_ADDR0__VALUE 0xffff
#define INTR_STATUS1 0x460
#define INTR_EN1__DMA_CMD_COMP 0x0004
#define INTR_EN1__TIME_OUT 0x0008
#define INTR_EN1__PROGRAM_FAIL 0x0010
-#define INTR_EN1__ERASE_FAIL 0x0020
+#define INTR_EN1__ERASE_FAIL 0x0020
#define INTR_EN1__LOAD_COMP 0x0040
#define INTR_EN1__PROGRAM_COMP 0x0080
-#define INTR_EN1__ERASE_COMP 0x0100
+#define INTR_EN1__ERASE_COMP 0x0100
#define INTR_EN1__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN1__LOCKED_BLK 0x0400
+#define INTR_EN1__LOCKED_BLK 0x0400
#define INTR_EN1__UNSUP_CMD 0x0800
#define INTR_EN1__INT_ACT 0x1000
#define INTR_EN1__RST_COMP 0x2000
#define ERR_PAGE_ADDR1 0x490
#define ERR_PAGE_ADDR1__VALUE 0xffff
-#define ERR_BLOCK_ADDR1 0x4a0
+#define ERR_BLOCK_ADDR1 0x4a0
#define ERR_BLOCK_ADDR1__VALUE 0xffff
#define INTR_STATUS2 0x4b0
#define INTR_EN2__DMA_CMD_COMP 0x0004
#define INTR_EN2__TIME_OUT 0x0008
#define INTR_EN2__PROGRAM_FAIL 0x0010
-#define INTR_EN2__ERASE_FAIL 0x0020
+#define INTR_EN2__ERASE_FAIL 0x0020
#define INTR_EN2__LOAD_COMP 0x0040
#define INTR_EN2__PROGRAM_COMP 0x0080
-#define INTR_EN2__ERASE_COMP 0x0100
+#define INTR_EN2__ERASE_COMP 0x0100
#define INTR_EN2__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN2__LOCKED_BLK 0x0400
+#define INTR_EN2__LOCKED_BLK 0x0400
#define INTR_EN2__UNSUP_CMD 0x0800
#define INTR_EN2__INT_ACT 0x1000
#define INTR_EN2__RST_COMP 0x2000
#define ERR_PAGE_ADDR2 0x4e0
#define ERR_PAGE_ADDR2__VALUE 0xffff
-#define ERR_BLOCK_ADDR2 0x4f0
+#define ERR_BLOCK_ADDR2 0x4f0
#define ERR_BLOCK_ADDR2__VALUE 0xffff
#define INTR_STATUS3 0x500
#define INTR_EN3__DMA_CMD_COMP 0x0004
#define INTR_EN3__TIME_OUT 0x0008
#define INTR_EN3__PROGRAM_FAIL 0x0010
-#define INTR_EN3__ERASE_FAIL 0x0020
+#define INTR_EN3__ERASE_FAIL 0x0020
#define INTR_EN3__LOAD_COMP 0x0040
#define INTR_EN3__PROGRAM_COMP 0x0080
-#define INTR_EN3__ERASE_COMP 0x0100
+#define INTR_EN3__ERASE_COMP 0x0100
#define INTR_EN3__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN3__LOCKED_BLK 0x0400
+#define INTR_EN3__LOCKED_BLK 0x0400
#define INTR_EN3__UNSUP_CMD 0x0800
#define INTR_EN3__INT_ACT 0x1000
#define INTR_EN3__RST_COMP 0x2000
#define ERR_PAGE_ADDR3 0x530
#define ERR_PAGE_ADDR3__VALUE 0xffff
-#define ERR_BLOCK_ADDR3 0x540
+#define ERR_BLOCK_ADDR3 0x540
#define ERR_BLOCK_ADDR3__VALUE 0xffff
#define DATA_INTR 0x550
#define GPREG_3__VALUE 0xffff
#define ECC_THRESHOLD 0x600
-#define ECC_THRESHOLD__VALUE 0x03ff
+#define ECC_THRESHOLD__VALUE 0x03ff
-#define ECC_ERROR_BLOCK_ADDRESS 0x610
+#define ECC_ERROR_BLOCK_ADDRESS 0x610
#define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff
#define ECC_ERROR_PAGE_ADDRESS 0x620
#define CHNL_ACTIVE__CHANNEL3 0x0008
#define ACTIVE_SRC_ID 0x800
-#define ACTIVE_SRC_ID__VALUE 0x00ff
+#define ACTIVE_SRC_ID__VALUE 0x00ff
#define PTN_INTR 0x810
#define PTN_INTR__CONFIG_ERROR 0x0001
#define PTN_INTR_EN__REG_ACCESS_ERROR 0x0020
#define PERM_SRC_ID_0 0x830
-#define PERM_SRC_ID_0__SRCID 0x00ff
+#define PERM_SRC_ID_0__SRCID 0x00ff
#define PERM_SRC_ID_0__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_0__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_0__READ_ACTIVE 0x4000
#define MIN_MAX_BANK_0__MAX_VALUE 0x000c
#define PERM_SRC_ID_1 0x870
-#define PERM_SRC_ID_1__SRCID 0x00ff
+#define PERM_SRC_ID_1__SRCID 0x00ff
#define PERM_SRC_ID_1__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_1__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_1__READ_ACTIVE 0x4000
#define MIN_MAX_BANK_1__MAX_VALUE 0x000c
#define PERM_SRC_ID_2 0x8b0
-#define PERM_SRC_ID_2__SRCID 0x00ff
+#define PERM_SRC_ID_2__SRCID 0x00ff
#define PERM_SRC_ID_2__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_2__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_2__READ_ACTIVE 0x4000
#define MIN_MAX_BANK_2__MAX_VALUE 0x000c
#define PERM_SRC_ID_3 0x8f0
-#define PERM_SRC_ID_3__SRCID 0x00ff
+#define PERM_SRC_ID_3__SRCID 0x00ff
#define PERM_SRC_ID_3__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_3__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_3__READ_ACTIVE 0x4000
#define MIN_MAX_BANK_3__MAX_VALUE 0x000c
#define PERM_SRC_ID_4 0x930
-#define PERM_SRC_ID_4__SRCID 0x00ff
+#define PERM_SRC_ID_4__SRCID 0x00ff
#define PERM_SRC_ID_4__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_4__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_4__READ_ACTIVE 0x4000
#define MIN_MAX_BANK_4__MAX_VALUE 0x000c
#define PERM_SRC_ID_5 0x970
-#define PERM_SRC_ID_5__SRCID 0x00ff
+#define PERM_SRC_ID_5__SRCID 0x00ff
#define PERM_SRC_ID_5__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_5__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_5__READ_ACTIVE 0x4000
#define MIN_MAX_BANK_5__MAX_VALUE 0x000c
#define PERM_SRC_ID_6 0x9b0
-#define PERM_SRC_ID_6__SRCID 0x00ff
+#define PERM_SRC_ID_6__SRCID 0x00ff
#define PERM_SRC_ID_6__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_6__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_6__READ_ACTIVE 0x4000
#define MIN_MAX_BANK_6__MAX_VALUE 0x000c
#define PERM_SRC_ID_7 0x9f0
-#define PERM_SRC_ID_7__SRCID 0x00ff
+#define PERM_SRC_ID_7__SRCID 0x00ff
#define PERM_SRC_ID_7__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_7__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_7__READ_ACTIVE 0x4000
#define MIN_MAX_BANK_7__MIN_VALUE 0x0003
#define MIN_MAX_BANK_7__MAX_VALUE 0x000c
-/* flash.h */
-struct device_info_tag {
- uint16_t wDeviceMaker;
- uint16_t wDeviceID;
- uint8_t bDeviceParam0;
- uint8_t bDeviceParam1;
- uint8_t bDeviceParam2;
- uint32_t wDeviceType;
- uint32_t wSpectraStartBlock;
- uint32_t wSpectraEndBlock;
- uint32_t wTotalBlocks;
- uint16_t wPagesPerBlock;
- uint16_t wPageSize;
- uint16_t wPageDataSize;
- uint16_t wPageSpareSize;
- uint16_t wNumPageSpareFlag;
- uint16_t wECCBytesPerSector;
- uint32_t wBlockSize;
- uint32_t wBlockDataSize;
- uint32_t wDataBlockNum;
- uint8_t bPlaneNum;
- uint16_t wDeviceMainAreaSize;
- uint16_t wDeviceSpareAreaSize;
- uint16_t wDevicesConnected;
- uint16_t wDeviceWidth;
- uint16_t wHWRevision;
- uint16_t wHWFeatures;
-
- uint16_t wONFIDevFeatures;
- uint16_t wONFIOptCommands;
- uint16_t wONFITimingMode;
- uint16_t wONFIPgmCacheTimingMode;
-
- uint16_t MLCDevice;
- uint16_t wSpareSkipBytes;
-
- uint8_t nBitsInPageNumber;
- uint8_t nBitsInPageDataSize;
- uint8_t nBitsInBlockDataSize;
-};
-
/* ffsdefs.h */
#define CLEAR 0 /*use this to clear a field instead of "fail"*/
#define SET 1 /*use this to set a field instead of "pass"*/
#define CLK_X 5
#define CLK_MULTI 4
-/* ffsport.h */
-#define VERBOSE 1
-
-#define NAND_DBG_WARN 1
-#define NAND_DBG_DEBUG 2
-#define NAND_DBG_TRACE 3
-
-#ifdef VERBOSE
-#define nand_dbg_print(level, args...) \
- do { \
- if (level <= nand_debug_level) \
- printk(KERN_ALERT args); \
- } while (0)
-#else
-#define nand_dbg_print(level, args...)
-#endif
-
-
/* spectraswconfig.h */
#define CMD_DMA 0
#define ECC_SECTOR_SIZE 512
#define LLD_MAX_FLASH_BANKS 4
-#define DENALI_BUF_SIZE NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE
+#define DENALI_BUF_SIZE (NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE)
-struct nand_buf
-{
+struct nand_buf {
int head;
int tail;
uint8_t buf[DENALI_BUF_SIZE];
struct denali_nand_info {
struct mtd_info mtd;
struct nand_chip nand;
- struct device_info_tag dev_info;
int flash_bank; /* currently selected chip */
int status;
int platform;
uint32_t irq_status;
int irq_debug_array[32];
int idx;
-};
-static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali);
-static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali);
-static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali, uint16_t INT_ENABLE);
+ uint32_t devnum; /* represent how many nands connected */
+ uint32_t fwblks; /* represent how many blocks FW used */
+ uint32_t totalblks;
+ uint32_t blksperchip;
+ uint32_t bbtskipbytes;
+};
#endif /*_LLD_NAND_*/
-
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/doc2000.h>
-#include <linux/mtd/compatmac.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/inftl.h>
uint8_t parity;
uint16_t ds[4], s[5], tmp, errval[8], syn[4];
+ memset(syn, 0, sizeof(syn));
/* Convert the ecc bytes into words */
ds[0] = ((ecc[4] & 0xff) >> 0) | ((ecc[5] & 0x03) << 8);
ds[1] = ((ecc[5] & 0xfc) >> 2) | ((ecc[2] & 0x0f) << 6);
s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)];
}
- /* Calc s[i] = s[i] / alpha^(v + i) */
+ /* Calc syn[i] = s[i] / alpha^(v + i) */
for (i = 0; i < NROOTS; i++) {
- if (syn[i])
+ if (s[i])
syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i));
}
/* Call the decoder library */
return 0;
}
-static int fsl_elbc_ctrl_remove(struct of_device *ofdev)
+static int fsl_elbc_ctrl_remove(struct platform_device *ofdev)
{
struct fsl_elbc_ctrl *ctrl = dev_get_drvdata(&ofdev->dev);
int i;
* in the chip probe function.
*/
-static int __devinit fsl_elbc_ctrl_probe(struct of_device *ofdev,
+static int __devinit fsl_elbc_ctrl_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *child;
return ret;
}
-static int __devinit fun_probe(struct of_device *ofdev,
+static int __devinit fun_probe(struct platform_device *ofdev,
const struct of_device_id *ofid)
{
struct fsl_upm_nand *fun;
return ret;
}
-static int __devexit fun_remove(struct of_device *ofdev)
+static int __devexit fun_remove(struct platform_device *ofdev)
{
struct fsl_upm_nand *fun = dev_get_drvdata(&ofdev->dev);
int i;
iounmap(prv->csreg);
}
-static int __devinit mpc5121_nfc_probe(struct of_device *op,
+static int __devinit mpc5121_nfc_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *rootnode, *dn = op->dev.of_node;
return retval;
}
-static int __devexit mpc5121_nfc_remove(struct of_device *op)
+static int __devexit mpc5121_nfc_remove(struct platform_device *op)
{
struct device *dev = &op->dev;
struct mtd_info *mtd = dev_get_drvdata(dev);
#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
+#define nfc_is_v3_2() cpu_is_mx51()
+#define nfc_is_v3() nfc_is_v3_2()
/* Addresses for NFC registers */
-#define NFC_BUF_SIZE 0xE00
-#define NFC_BUF_ADDR 0xE04
-#define NFC_FLASH_ADDR 0xE06
-#define NFC_FLASH_CMD 0xE08
-#define NFC_CONFIG 0xE0A
-#define NFC_ECC_STATUS_RESULT 0xE0C
-#define NFC_RSLTMAIN_AREA 0xE0E
-#define NFC_RSLTSPARE_AREA 0xE10
-#define NFC_WRPROT 0xE12
-#define NFC_V1_UNLOCKSTART_BLKADDR 0xe14
-#define NFC_V1_UNLOCKEND_BLKADDR 0xe16
-#define NFC_V21_UNLOCKSTART_BLKADDR 0xe20
-#define NFC_V21_UNLOCKEND_BLKADDR 0xe22
-#define NFC_NF_WRPRST 0xE18
-#define NFC_CONFIG1 0xE1A
-#define NFC_CONFIG2 0xE1C
-
-/* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
- * for Command operation */
-#define NFC_CMD 0x1
-
-/* Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register
- * for Address operation */
-#define NFC_ADDR 0x2
-
-/* Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register
- * for Input operation */
-#define NFC_INPUT 0x4
-
-/* Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register
- * for Data Output operation */
-#define NFC_OUTPUT 0x8
-
-/* Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register
- * for Read ID operation */
-#define NFC_ID 0x10
-
-/* Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register
- * for Read Status operation */
-#define NFC_STATUS 0x20
-
-/* Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read
- * Status operation */
-#define NFC_INT 0x8000
-
-#define NFC_SP_EN (1 << 2)
-#define NFC_ECC_EN (1 << 3)
-#define NFC_INT_MSK (1 << 4)
-#define NFC_BIG (1 << 5)
-#define NFC_RST (1 << 6)
-#define NFC_CE (1 << 7)
-#define NFC_ONE_CYCLE (1 << 8)
+#define NFC_V1_V2_BUF_SIZE (host->regs + 0x00)
+#define NFC_V1_V2_BUF_ADDR (host->regs + 0x04)
+#define NFC_V1_V2_FLASH_ADDR (host->regs + 0x06)
+#define NFC_V1_V2_FLASH_CMD (host->regs + 0x08)
+#define NFC_V1_V2_CONFIG (host->regs + 0x0a)
+#define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c)
+#define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e)
+#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10)
+#define NFC_V1_V2_WRPROT (host->regs + 0x12)
+#define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14)
+#define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16)
+#define NFC_V21_UNLOCKSTART_BLKADDR (host->regs + 0x20)
+#define NFC_V21_UNLOCKEND_BLKADDR (host->regs + 0x22)
+#define NFC_V1_V2_NF_WRPRST (host->regs + 0x18)
+#define NFC_V1_V2_CONFIG1 (host->regs + 0x1a)
+#define NFC_V1_V2_CONFIG2 (host->regs + 0x1c)
+
+#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0)
+#define NFC_V1_V2_CONFIG1_SP_EN (1 << 2)
+#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
+#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
+#define NFC_V1_V2_CONFIG1_BIG (1 << 5)
+#define NFC_V1_V2_CONFIG1_RST (1 << 6)
+#define NFC_V1_V2_CONFIG1_CE (1 << 7)
+#define NFC_V1_V2_CONFIG1_ONE_CYCLE (1 << 8)
+
+#define NFC_V1_V2_CONFIG2_INT (1 << 15)
+
+/*
+ * Operation modes for the NFC. Valid for v1, v2 and v3
+ * type controllers.
+ */
+#define NFC_CMD (1 << 0)
+#define NFC_ADDR (1 << 1)
+#define NFC_INPUT (1 << 2)
+#define NFC_OUTPUT (1 << 3)
+#define NFC_ID (1 << 4)
+#define NFC_STATUS (1 << 5)
+
+#define NFC_V3_FLASH_CMD (host->regs_axi + 0x00)
+#define NFC_V3_FLASH_ADDR0 (host->regs_axi + 0x04)
+
+#define NFC_V3_CONFIG1 (host->regs_axi + 0x34)
+#define NFC_V3_CONFIG1_SP_EN (1 << 0)
+#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7 ) << 4)
+
+#define NFC_V3_ECC_STATUS_RESULT (host->regs_axi + 0x38)
+
+#define NFC_V3_LAUNCH (host->regs_axi + 0x40)
+
+#define NFC_V3_WRPROT (host->regs_ip + 0x0)
+#define NFC_V3_WRPROT_LOCK_TIGHT (1 << 0)
+#define NFC_V3_WRPROT_LOCK (1 << 1)
+#define NFC_V3_WRPROT_UNLOCK (1 << 2)
+#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6)
+
+#define NFC_V3_WRPROT_UNLOCK_BLK_ADD0 (host->regs_ip + 0x04)
+
+#define NFC_V3_CONFIG2 (host->regs_ip + 0x24)
+#define NFC_V3_CONFIG2_PS_512 (0 << 0)
+#define NFC_V3_CONFIG2_PS_2048 (1 << 0)
+#define NFC_V3_CONFIG2_PS_4096 (2 << 0)
+#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2)
+#define NFC_V3_CONFIG2_ECC_EN (1 << 3)
+#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE0 (1 << 5)
+#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6)
+#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x) (((x) & 0x3) << 12)
+#define NFC_V3_CONFIG2_INT_MSK (1 << 15)
+#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24)
+#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16)
+
+#define NFC_V3_CONFIG3 (host->regs_ip + 0x28)
+#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0)
+#define NFC_V3_CONFIG3_FW8 (1 << 3)
+#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8)
+#define NFC_V3_CONFIG3_NUM_OF_DEVICES(x) (((x) & 0x7) << 12)
+#define NFC_V3_CONFIG3_RBB_MODE (1 << 15)
+#define NFC_V3_CONFIG3_NO_SDMA (1 << 20)
+
+#define NFC_V3_IPC (host->regs_ip + 0x2C)
+#define NFC_V3_IPC_CREQ (1 << 0)
+#define NFC_V3_IPC_INT (1 << 31)
+
+#define NFC_V3_DELAY_LINE (host->regs_ip + 0x34)
struct mxc_nand_host {
struct mtd_info mtd;
void *spare0;
void *main_area0;
- void *main_area1;
void __iomem *base;
void __iomem *regs;
+ void __iomem *regs_axi;
+ void __iomem *regs_ip;
int status_request;
struct clk *clk;
int clk_act;
int irq;
+ int eccsize;
wait_queue_head_t irq_waitq;
uint8_t *data_buf;
unsigned int buf_start;
int spare_len;
+
+ void (*preset)(struct mtd_info *);
+ void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
+ void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
+ void (*send_page)(struct mtd_info *, unsigned int);
+ void (*send_read_id)(struct mxc_nand_host *);
+ uint16_t (*get_dev_status)(struct mxc_nand_host *);
+ int (*check_int)(struct mxc_nand_host *);
};
/* OOB placement block for use with hardware ecc generation */
return IRQ_HANDLED;
}
+static int check_int_v3(struct mxc_nand_host *host)
+{
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_IPC);
+ if (!(tmp & NFC_V3_IPC_INT))
+ return 0;
+
+ tmp &= ~NFC_V3_IPC_INT;
+ writel(tmp, NFC_V3_IPC);
+
+ return 1;
+}
+
+static int check_int_v1_v2(struct mxc_nand_host *host)
+{
+ uint32_t tmp;
+
+ tmp = readw(NFC_V1_V2_CONFIG2);
+ if (!(tmp & NFC_V1_V2_CONFIG2_INT))
+ return 0;
+
+ writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
+
+ return 1;
+}
+
/* This function polls the NANDFC to wait for the basic operation to
* complete by checking the INT bit of config2 register.
*/
static void wait_op_done(struct mxc_nand_host *host, int useirq)
{
- uint16_t tmp;
int max_retries = 8000;
if (useirq) {
- if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) {
+ if (!host->check_int(host)) {
enable_irq(host->irq);
- wait_event(host->irq_waitq,
- readw(host->regs + NFC_CONFIG2) & NFC_INT);
-
- tmp = readw(host->regs + NFC_CONFIG2);
- tmp &= ~NFC_INT;
- writew(tmp, host->regs + NFC_CONFIG2);
+ wait_event(host->irq_waitq, host->check_int(host));
}
} else {
while (max_retries-- > 0) {
- if (readw(host->regs + NFC_CONFIG2) & NFC_INT) {
- tmp = readw(host->regs + NFC_CONFIG2);
- tmp &= ~NFC_INT;
- writew(tmp, host->regs + NFC_CONFIG2);
+ if (host->check_int(host))
break;
- }
+
udelay(1);
}
if (max_retries < 0)
}
}
+static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+{
+ /* fill command */
+ writel(cmd, NFC_V3_FLASH_CMD);
+
+ /* send out command */
+ writel(NFC_CMD, NFC_V3_LAUNCH);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, useirq);
+}
+
/* This function issues the specified command to the NAND device and
* waits for completion. */
-static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
{
DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
- writew(cmd, host->regs + NFC_FLASH_CMD);
- writew(NFC_CMD, host->regs + NFC_CONFIG2);
+ writew(cmd, NFC_V1_V2_FLASH_CMD);
+ writew(NFC_CMD, NFC_V1_V2_CONFIG2);
if (cpu_is_mx21() && (cmd == NAND_CMD_RESET)) {
int max_retries = 100;
/* Reset completion is indicated by NFC_CONFIG2 */
/* being set to 0 */
while (max_retries-- > 0) {
- if (readw(host->regs + NFC_CONFIG2) == 0) {
+ if (readw(NFC_V1_V2_CONFIG2) == 0) {
break;
}
udelay(1);
}
}
+static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
+{
+ /* fill address */
+ writel(addr, NFC_V3_FLASH_ADDR0);
+
+ /* send out address */
+ writel(NFC_ADDR, NFC_V3_LAUNCH);
+
+ wait_op_done(host, 0);
+}
+
/* This function sends an address (or partial address) to the
* NAND device. The address is used to select the source/destination for
* a NAND command. */
-static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
+static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
{
DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
- writew(addr, host->regs + NFC_FLASH_ADDR);
- writew(NFC_ADDR, host->regs + NFC_CONFIG2);
+ writew(addr, NFC_V1_V2_FLASH_ADDR);
+ writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
/* Wait for operation to complete */
wait_op_done(host, islast);
}
-static void send_page(struct mtd_info *mtd, unsigned int ops)
+static void send_page_v3(struct mtd_info *mtd, unsigned int ops)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_CONFIG1);
+ tmp &= ~(7 << 4);
+ writel(tmp, NFC_V3_CONFIG1);
+
+ /* transfer data from NFC ram to nand */
+ writel(ops, NFC_V3_LAUNCH);
+
+ wait_op_done(host, false);
+}
+
+static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops)
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
for (i = 0; i < bufs; i++) {
/* NANDFC buffer 0 is used for page read/write */
- writew(i, host->regs + NFC_BUF_ADDR);
+ writew(i, NFC_V1_V2_BUF_ADDR);
- writew(ops, host->regs + NFC_CONFIG2);
+ writew(ops, NFC_V1_V2_CONFIG2);
/* Wait for operation to complete */
wait_op_done(host, true);
}
}
+static void send_read_id_v3(struct mxc_nand_host *host)
+{
+ /* Read ID into main buffer */
+ writel(NFC_ID, NFC_V3_LAUNCH);
+
+ wait_op_done(host, true);
+
+ memcpy(host->data_buf, host->main_area0, 16);
+}
+
/* Request the NANDFC to perform a read of the NAND device ID. */
-static void send_read_id(struct mxc_nand_host *host)
+static void send_read_id_v1_v2(struct mxc_nand_host *host)
{
struct nand_chip *this = &host->nand;
/* NANDFC buffer 0 is used for device ID output */
- writew(0x0, host->regs + NFC_BUF_ADDR);
+ writew(0x0, NFC_V1_V2_BUF_ADDR);
- writew(NFC_ID, host->regs + NFC_CONFIG2);
+ writew(NFC_ID, NFC_V1_V2_CONFIG2);
/* Wait for operation to complete */
wait_op_done(host, true);
memcpy(host->data_buf, host->main_area0, 16);
}
+static uint16_t get_dev_status_v3(struct mxc_nand_host *host)
+{
+ writew(NFC_STATUS, NFC_V3_LAUNCH);
+ wait_op_done(host, true);
+
+ return readl(NFC_V3_CONFIG1) >> 16;
+}
+
/* This function requests the NANDFC to perform a read of the
* NAND device status and returns the current status. */
-static uint16_t get_dev_status(struct mxc_nand_host *host)
+static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
{
- void __iomem *main_buf = host->main_area1;
+ void __iomem *main_buf = host->main_area0;
uint32_t store;
uint16_t ret;
- /* Issue status request to NAND device */
- /* store the main area1 first word, later do recovery */
- store = readl(main_buf);
- /* NANDFC buffer 1 is used for device status to prevent
- * corruption of read/write buffer on status requests. */
- writew(1, host->regs + NFC_BUF_ADDR);
+ writew(0x0, NFC_V1_V2_BUF_ADDR);
- writew(NFC_STATUS, host->regs + NFC_CONFIG2);
+ /*
+ * The device status is stored in main_area0. To
+ * prevent corruption of the buffer save the value
+ * and restore it afterwards.
+ */
+ store = readl(main_buf);
- /* Wait for operation to complete */
+ writew(NFC_STATUS, NFC_V1_V2_CONFIG2);
wait_op_done(host, true);
- /* Status is placed in first word of main buffer */
- /* get status, then recovery area 1 data */
ret = readw(main_buf);
+
writel(store, main_buf);
return ret;
*/
}
-static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
struct nand_chip *nand_chip = mtd->priv;
* additional correction. 2-Bit errors cannot be corrected by
* HW ECC, so we need to return failure
*/
- uint16_t ecc_status = readw(host->regs + NFC_ECC_STATUS_RESULT);
+ uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
DEBUG(MTD_DEBUG_LEVEL0,
return 0;
}
+static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ u32 ecc_stat, err;
+ int no_subpages = 1;
+ int ret = 0;
+ u8 ecc_bit_mask, err_limit;
+
+ ecc_bit_mask = (host->eccsize == 4) ? 0x7 : 0xf;
+ err_limit = (host->eccsize == 4) ? 0x4 : 0x8;
+
+ no_subpages = mtd->writesize >> 9;
+
+ if (nfc_is_v21())
+ ecc_stat = readl(NFC_V1_V2_ECC_STATUS_RESULT);
+ else
+ ecc_stat = readl(NFC_V3_ECC_STATUS_RESULT);
+
+ do {
+ err = ecc_stat & ecc_bit_mask;
+ if (err > err_limit) {
+ printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
+ return -1;
+ } else {
+ ret += err;
+ }
+ ecc_stat >>= 4;
+ } while (--no_subpages);
+
+ mtd->ecc_stats.corrected += ret;
+ pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
+
+ return ret;
+}
+
static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
u_char *ecc_code)
{
/* Check for status request */
if (host->status_request)
- return get_dev_status(host) & 0xFF;
+ return host->get_dev_status(host) & 0xFF;
ret = *(uint8_t *)(host->data_buf + host->buf_start);
host->buf_start++;
* we will used the saved column address to index into
* the full page.
*/
- send_addr(host, 0, page_addr == -1);
+ host->send_addr(host, 0, page_addr == -1);
if (mtd->writesize > 512)
/* another col addr cycle for 2k page */
- send_addr(host, 0, false);
+ host->send_addr(host, 0, false);
}
/* Write out page address, if necessary */
if (page_addr != -1) {
/* paddr_0 - p_addr_7 */
- send_addr(host, (page_addr & 0xff), false);
+ host->send_addr(host, (page_addr & 0xff), false);
if (mtd->writesize > 512) {
if (mtd->size >= 0x10000000) {
/* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff, false);
- send_addr(host, (page_addr >> 16) & 0xff, true);
+ host->send_addr(host, (page_addr >> 8) & 0xff, false);
+ host->send_addr(host, (page_addr >> 16) & 0xff, true);
} else
/* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff, true);
+ host->send_addr(host, (page_addr >> 8) & 0xff, true);
} else {
/* One more address cycle for higher density devices */
if (mtd->size >= 0x4000000) {
/* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff, false);
- send_addr(host, (page_addr >> 16) & 0xff, true);
+ host->send_addr(host, (page_addr >> 8) & 0xff, false);
+ host->send_addr(host, (page_addr >> 16) & 0xff, true);
} else
/* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff, true);
+ host->send_addr(host, (page_addr >> 8) & 0xff, true);
}
}
}
-static void preset(struct mtd_info *mtd)
+/*
+ * v2 and v3 type controllers can do 4bit or 8bit ecc depending
+ * on how much oob the nand chip has. For 8bit ecc we need at least
+ * 26 bytes of oob data per 512 byte block.
+ */
+static int get_eccsize(struct mtd_info *mtd)
+{
+ int oobbytes_per_512 = 0;
+
+ oobbytes_per_512 = mtd->oobsize * 512 / mtd->writesize;
+
+ if (oobbytes_per_512 < 26)
+ return 4;
+ else
+ return 8;
+}
+
+static void preset_v1_v2(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
uint16_t tmp;
/* enable interrupt, disable spare enable */
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp &= ~NFC_INT_MSK;
- tmp &= ~NFC_SP_EN;
+ tmp = readw(NFC_V1_V2_CONFIG1);
+ tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
+ tmp &= ~NFC_V1_V2_CONFIG1_SP_EN;
if (nand_chip->ecc.mode == NAND_ECC_HW) {
- tmp |= NFC_ECC_EN;
+ tmp |= NFC_V1_V2_CONFIG1_ECC_EN;
+ } else {
+ tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN;
+ }
+
+ if (nfc_is_v21() && mtd->writesize) {
+ host->eccsize = get_eccsize(mtd);
+ if (host->eccsize == 4)
+ tmp |= NFC_V2_CONFIG1_ECC_MODE_4;
} else {
- tmp &= ~NFC_ECC_EN;
+ host->eccsize = 1;
}
- writew(tmp, host->regs + NFC_CONFIG1);
+
+ writew(tmp, NFC_V1_V2_CONFIG1);
/* preset operation */
/* Unlock the internal RAM Buffer */
- writew(0x2, host->regs + NFC_CONFIG);
+ writew(0x2, NFC_V1_V2_CONFIG);
/* Blocks to be unlocked */
if (nfc_is_v21()) {
- writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
- writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR);
} else if (nfc_is_v1()) {
- writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
- writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
+ writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
+ writew(0x4000, NFC_V1_UNLOCKEND_BLKADDR);
} else
BUG();
/* Unlock Block Command for given address range */
- writew(0x4, host->regs + NFC_WRPROT);
+ writew(0x4, NFC_V1_V2_WRPROT);
+}
+
+static void preset_v3(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxc_nand_host *host = chip->priv;
+ uint32_t config2, config3;
+ int i, addr_phases;
+
+ writel(NFC_V3_CONFIG1_RBA(0), NFC_V3_CONFIG1);
+ writel(NFC_V3_IPC_CREQ, NFC_V3_IPC);
+
+ /* Unlock the internal RAM Buffer */
+ writel(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
+ NFC_V3_WRPROT);
+
+ /* Blocks to be unlocked */
+ for (i = 0; i < NAND_MAX_CHIPS; i++)
+ writel(0x0 | (0xffff << 16),
+ NFC_V3_WRPROT_UNLOCK_BLK_ADD0 + (i << 2));
+
+ writel(0, NFC_V3_IPC);
+
+ config2 = NFC_V3_CONFIG2_ONE_CYCLE |
+ NFC_V3_CONFIG2_2CMD_PHASES |
+ NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) |
+ NFC_V3_CONFIG2_ST_CMD(0x70) |
+ NFC_V3_CONFIG2_NUM_ADDR_PHASE0;
+
+ if (chip->ecc.mode == NAND_ECC_HW)
+ config2 |= NFC_V3_CONFIG2_ECC_EN;
+
+ addr_phases = fls(chip->pagemask) >> 3;
+
+ if (mtd->writesize == 2048) {
+ config2 |= NFC_V3_CONFIG2_PS_2048;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+ } else if (mtd->writesize == 4096) {
+ config2 |= NFC_V3_CONFIG2_PS_4096;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+ } else {
+ config2 |= NFC_V3_CONFIG2_PS_512;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases - 1);
+ }
+
+ if (mtd->writesize) {
+ config2 |= NFC_V3_CONFIG2_PPB(ffs(mtd->erasesize / mtd->writesize) - 6);
+ host->eccsize = get_eccsize(mtd);
+ if (host->eccsize == 8)
+ config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
+ }
+
+ writel(config2, NFC_V3_CONFIG2);
+
+ config3 = NFC_V3_CONFIG3_NUM_OF_DEVICES(0) |
+ NFC_V3_CONFIG3_NO_SDMA |
+ NFC_V3_CONFIG3_RBB_MODE |
+ NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+ NFC_V3_CONFIG3_ADD_OP(0);
+
+ if (!(chip->options & NAND_BUSWIDTH_16))
+ config3 |= NFC_V3_CONFIG3_FW8;
+
+ writel(config3, NFC_V3_CONFIG3);
+
+ writel(0, NFC_V3_DELAY_LINE);
}
/* Used by the upper layer to write command to NAND Flash for
/* Command pre-processing step */
switch (command) {
case NAND_CMD_RESET:
- send_cmd(host, command, false);
- preset(mtd);
+ host->preset(mtd);
+ host->send_cmd(host, command, false);
break;
case NAND_CMD_STATUS:
host->buf_start = 0;
host->status_request = true;
- send_cmd(host, command, true);
+ host->send_cmd(host, command, true);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
command = NAND_CMD_READ0; /* only READ0 is valid */
- send_cmd(host, command, false);
+ host->send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
if (mtd->writesize > 512)
- send_cmd(host, NAND_CMD_READSTART, true);
+ host->send_cmd(host, NAND_CMD_READSTART, true);
- send_page(mtd, NFC_OUTPUT);
+ host->send_page(mtd, NFC_OUTPUT);
memcpy(host->data_buf, host->main_area0, mtd->writesize);
copy_spare(mtd, true);
host->buf_start = column;
- send_cmd(host, command, false);
+ host->send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
case NAND_CMD_PAGEPROG:
memcpy(host->main_area0, host->data_buf, mtd->writesize);
copy_spare(mtd, false);
- send_page(mtd, NFC_INPUT);
- send_cmd(host, command, true);
+ host->send_page(mtd, NFC_INPUT);
+ host->send_cmd(host, command, true);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
case NAND_CMD_READID:
- send_cmd(host, command, true);
+ host->send_cmd(host, command, true);
mxc_do_addr_cycle(mtd, column, page_addr);
- send_read_id(host);
+ host->send_read_id(host);
host->buf_start = column;
break;
case NAND_CMD_ERASE1:
case NAND_CMD_ERASE2:
- send_cmd(host, command, false);
+ host->send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
}
host->main_area0 = host->base;
- host->main_area1 = host->base + 0x200;
+
+ if (nfc_is_v1() || nfc_is_v21()) {
+ host->preset = preset_v1_v2;
+ host->send_cmd = send_cmd_v1_v2;
+ host->send_addr = send_addr_v1_v2;
+ host->send_page = send_page_v1_v2;
+ host->send_read_id = send_read_id_v1_v2;
+ host->get_dev_status = get_dev_status_v1_v2;
+ host->check_int = check_int_v1_v2;
+ }
if (nfc_is_v21()) {
- host->regs = host->base + 0x1000;
+ host->regs = host->base + 0x1e00;
host->spare0 = host->base + 0x1000;
host->spare_len = 64;
oob_smallpage = &nandv2_hw_eccoob_smallpage;
oob_largepage = &nandv2_hw_eccoob_largepage;
this->ecc.bytes = 9;
} else if (nfc_is_v1()) {
- host->regs = host->base;
+ host->regs = host->base + 0xe00;
host->spare0 = host->base + 0x800;
host->spare_len = 16;
oob_smallpage = &nandv1_hw_eccoob_smallpage;
oob_largepage = &nandv1_hw_eccoob_largepage;
this->ecc.bytes = 3;
+ host->eccsize = 1;
+ } else if (nfc_is_v3_2()) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ err = -ENODEV;
+ goto eirq;
+ }
+ host->regs_ip = ioremap(res->start, resource_size(res));
+ if (!host->regs_ip) {
+ err = -ENOMEM;
+ goto eirq;
+ }
+ host->regs_axi = host->base + 0x1e00;
+ host->spare0 = host->base + 0x1000;
+ host->spare_len = 64;
+ host->preset = preset_v3;
+ host->send_cmd = send_cmd_v3;
+ host->send_addr = send_addr_v3;
+ host->send_page = send_page_v3;
+ host->send_read_id = send_read_id_v3;
+ host->check_int = check_int_v3;
+ host->get_dev_status = get_dev_status_v3;
+ oob_smallpage = &nandv2_hw_eccoob_smallpage;
+ oob_largepage = &nandv2_hw_eccoob_largepage;
} else
BUG();
if (pdata->hw_ecc) {
this->ecc.calculate = mxc_nand_calculate_ecc;
this->ecc.hwctl = mxc_nand_enable_hwecc;
- this->ecc.correct = mxc_nand_correct_data;
+ if (nfc_is_v1())
+ this->ecc.correct = mxc_nand_correct_data_v1;
+ else
+ this->ecc.correct = mxc_nand_correct_data_v2_v3;
this->ecc.mode = NAND_ECC_HW;
} else {
this->ecc.mode = NAND_ECC_SOFT;
goto escan;
}
+ /* Call preset again, with correct writesize this time */
+ host->preset(mtd);
+
if (mtd->writesize == 2048)
this->ecc.layout = oob_largepage;
escan:
free_irq(host->irq, host);
eirq:
+ if (host->regs_ip)
+ iounmap(host->regs_ip);
iounmap(host->base);
eres:
clk_put(host->clk);
nand_release(&host->mtd);
free_irq(host->irq, host);
+ if (host->regs_ip)
+ iounmap(host->regs_ip);
iounmap(host->base);
kfree(host);
return 0;
}
-#ifdef CONFIG_PM
-static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct mtd_info *mtd = platform_get_drvdata(pdev);
- struct nand_chip *nand_chip = mtd->priv;
- struct mxc_nand_host *host = nand_chip->priv;
- int ret = 0;
-
- DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
-
- ret = mtd->suspend(mtd);
-
- /*
- * nand_suspend locks the device for exclusive access, so
- * the clock must already be off.
- */
- BUG_ON(!ret && host->clk_act);
-
- return ret;
-}
-
-static int mxcnd_resume(struct platform_device *pdev)
-{
- struct mtd_info *mtd = platform_get_drvdata(pdev);
- struct nand_chip *nand_chip = mtd->priv;
- struct mxc_nand_host *host = nand_chip->priv;
- int ret = 0;
-
- DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
-
- mtd->resume(mtd);
-
- return ret;
-}
-
-#else
-# define mxcnd_suspend NULL
-# define mxcnd_resume NULL
-#endif /* CONFIG_PM */
-
static struct platform_driver mxcnd_driver = {
.driver = {
.name = DRIVER_NAME,
- },
+ },
.remove = __devexit_p(mxcnd_remove),
- .suspend = mxcnd_suspend,
- .resume = mxcnd_resume,
};
static int __init mxc_nd_init(void)
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/leds.h>
struct nand_chip *chip = mtd->priv;
u16 bad;
- if (chip->options & NAND_BB_LAST_PAGE)
+ if (chip->options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
{
struct nand_chip *chip = mtd->priv;
uint8_t buf[2] = { 0, 0 };
- int block, ret;
+ int block, ret, i = 0;
- if (chip->options & NAND_BB_LAST_PAGE)
+ if (chip->options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
/* Get block number */
if (chip->options & NAND_USE_FLASH_BBT)
ret = nand_update_bbt(mtd, ofs);
else {
- /* We write two bytes, so we dont have to mess with 16 bit
- * access
- */
nand_get_device(chip, mtd, FL_WRITING);
- ofs += mtd->oobsize;
- chip->ops.len = chip->ops.ooblen = 2;
- chip->ops.datbuf = NULL;
- chip->ops.oobbuf = buf;
- chip->ops.ooboffs = chip->badblockpos & ~0x01;
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ /* Write to first two pages and to byte 1 and 6 if necessary.
+ * If we write to more than one location, the first error
+ * encountered quits the procedure. We write two bytes per
+ * location, so we dont have to mess with 16 bit access.
+ */
+ do {
+ chip->ops.len = chip->ops.ooblen = 2;
+ chip->ops.datbuf = NULL;
+ chip->ops.oobbuf = buf;
+ chip->ops.ooboffs = chip->badblockpos & ~0x01;
+
+ ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+
+ if (!ret && (chip->options & NAND_BBT_SCANBYTE1AND6)) {
+ chip->ops.ooboffs = NAND_SMALL_BADBLOCK_POS
+ & ~0x01;
+ ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ }
+ i++;
+ ofs += mtd->writesize;
+ } while (!ret && (chip->options & NAND_BBT_SCAN2NDPAGE) &&
+ i < 2);
+
nand_release_device(mtd);
}
if (!ret)
}
/**
- * __nand_unlock - [REPLACABLE] unlocks specified locked blockes
+ * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
*
- * @param mtd - mtd info
- * @param ofs - offset to start unlock from
- * @param len - length to unlock
- * @invert - when = 0, unlock the range of blocks within the lower and
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
+ * @invert: when = 0, unlock the range of blocks within the lower and
* upper boundary address
- * whne = 1, unlock the range of blocks outside the boundaries
+ * when = 1, unlock the range of blocks outside the boundaries
* of the lower and upper boundary address
*
- * @return - unlock status
+ * return - unlock status
*/
static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
uint64_t len, int invert)
}
/**
- * nand_unlock - [REPLACABLE] unlocks specified locked blockes
+ * nand_unlock - [REPLACEABLE] unlocks specified locked blocks
*
- * @param mtd - mtd info
- * @param ofs - offset to start unlock from
- * @param len - length to unlock
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
*
- * @return - unlock status
+ * return - unlock status
*/
int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
}
/**
- * nand_lock - [REPLACABLE] locks all blockes present in the device
+ * nand_lock - [REPLACEABLE] locks all blocks present in the device
*
- * @param mtd - mtd info
- * @param ofs - offset to start unlock from
- * @param len - length to unlock
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
*
- * @return - lock status
+ * return - lock status
*
- * This feature is not support in many NAND parts. 'Micron' NAND parts
- * do have this feature, but it allows only to lock all blocks not for
+ * This feature is not supported in many NAND parts. 'Micron' NAND parts
+ * do have this feature, but it allows only to lock all blocks, not for
* specified range for block.
*
* Implementing 'lock' feature by making use of 'unlock', for now.
* nand_fill_oob - [Internal] Transfer client buffer to oob
* @chip: nand chip structure
* @oob: oob data buffer
+ * @len: oob data write length
* @ops: oob ops structure
*/
static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 32 - 1;
/* Set the bad block position */
- chip->badblockpos = mtd->writesize > 512 ?
- NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
- chip->badblockbits = 8;
+ if (!(busw & NAND_BUSWIDTH_16) && (*maf_id == NAND_MFR_STMICRO ||
+ (*maf_id == NAND_MFR_SAMSUNG &&
+ mtd->writesize == 512) ||
+ *maf_id == NAND_MFR_AMD))
+ chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
+ else
+ chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
+
/* Get chip options, preserve non chip based options */
chip->options &= ~NAND_CHIPOPTIONS_MSK;
/*
* Bad block marker is stored in the last page of each block
- * on Samsung and Hynix MLC devices
+ * on Samsung and Hynix MLC devices; stored in first two pages
+ * of each block on Micron devices with 2KiB pages and on
+ * SLC Samsung, Hynix, and AMD/Spansion. All others scan only
+ * the first page.
*/
if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX))
- chip->options |= NAND_BB_LAST_PAGE;
+ chip->options |= NAND_BBT_SCANLASTPAGE;
+ else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ (*maf_id == NAND_MFR_SAMSUNG ||
+ *maf_id == NAND_MFR_HYNIX ||
+ *maf_id == NAND_MFR_AMD)) ||
+ (mtd->writesize == 2048 &&
+ *maf_id == NAND_MFR_MICRON))
+ chip->options |= NAND_BBT_SCAN2NDPAGE;
+
+ /*
+ * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6
+ */
+ if (!(busw & NAND_BUSWIDTH_16) &&
+ *maf_id == NAND_MFR_STMICRO &&
+ mtd->writesize == 2048) {
+ chip->options |= NAND_BBT_SCANBYTE1AND6;
+ chip->badblockpos = 0;
+ }
/* Check for AND chips with 4 page planes */
if (chip->options & NAND_4PAGE_ARRAY)
kfree(chip->bbt);
if (!(chip->options & NAND_OWN_BUFFERS))
kfree(chip->buffers);
+
+ /* Free bad block descriptor memory */
+ if (chip->badblock_pattern && chip->badblock_pattern->options
+ & NAND_BBT_DYNAMICSTRUCT)
+ kfree(chip->badblock_pattern);
}
EXPORT_SYMBOL_GPL(nand_lock);
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
return -1;
}
+ /* Check both positions 1 and 6 for pattern? */
+ if (td->options & NAND_BBT_SCANBYTE1AND6) {
+ if (td->options & NAND_BBT_SCANEMPTY) {
+ p += td->len;
+ end += NAND_SMALL_BADBLOCK_POS - td->offs;
+ /* Check region between positions 1 and 6 */
+ for (i = 0; i < NAND_SMALL_BADBLOCK_POS - td->offs - td->len;
+ i++) {
+ if (*p++ != 0xff)
+ return -1;
+ }
+ }
+ else {
+ p += NAND_SMALL_BADBLOCK_POS - td->offs;
+ }
+ /* Compare the pattern */
+ for (i = 0; i < td->len; i++) {
+ if (p[i] != td->pattern[i])
+ return -1;
+ }
+ }
+
if (td->options & NAND_BBT_SCANEMPTY) {
p += td->len;
end += td->len;
if (p[td->offs + i] != td->pattern[i])
return -1;
}
+ /* Need to check location 1 AND 6? */
+ if (td->options & NAND_BBT_SCANBYTE1AND6) {
+ for (i = 0; i < td->len; i++) {
+ if (p[NAND_SMALL_BADBLOCK_POS + i] != td->pattern[i])
+ return -1;
+ }
+ }
return 0;
}
if (bd->options & NAND_BBT_SCANALLPAGES)
len = 1 << (this->bbt_erase_shift - this->page_shift);
- else {
- if (bd->options & NAND_BBT_SCAN2NDPAGE)
- len = 2;
- else
- len = 1;
- }
+ else if (bd->options & NAND_BBT_SCAN2NDPAGE)
+ len = 2;
+ else
+ len = 1;
if (!(bd->options & NAND_BBT_SCANEMPTY)) {
/* We need only read few bytes from the OOB area */
from = (loff_t)startblock << (this->bbt_erase_shift - 1);
}
- if (this->options & NAND_BB_LAST_PAGE)
+ if (this->options & NAND_BBT_SCANLASTPAGE)
from += mtd->erasesize - (mtd->writesize * len);
for (i = startblock; i < numblocks;) {
* while scanning a device for factory marked good / bad blocks. */
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-static struct nand_bbt_descr smallpage_memorybased = {
- .options = NAND_BBT_SCAN2NDPAGE,
- .offs = 5,
- .len = 1,
- .pattern = scan_ff_pattern
-};
-
-static struct nand_bbt_descr largepage_memorybased = {
- .options = 0,
- .offs = 0,
- .len = 2,
- .pattern = scan_ff_pattern
-};
-
static struct nand_bbt_descr smallpage_flashbased = {
.options = NAND_BBT_SCAN2NDPAGE,
- .offs = 5,
+ .offs = NAND_SMALL_BADBLOCK_POS,
.len = 1,
.pattern = scan_ff_pattern
};
static struct nand_bbt_descr largepage_flashbased = {
.options = NAND_BBT_SCAN2NDPAGE,
- .offs = 0,
+ .offs = NAND_LARGE_BADBLOCK_POS,
.len = 2,
.pattern = scan_ff_pattern
};
.pattern = mirror_pattern
};
+#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \
+ NAND_BBT_SCANBYTE1AND6)
+/**
+ * nand_create_default_bbt_descr - [Internal] Creates a BBT descriptor structure
+ * @this: NAND chip to create descriptor for
+ *
+ * This function allocates and initializes a nand_bbt_descr for BBM detection
+ * based on the properties of "this". The new descriptor is stored in
+ * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
+ * passed to this function.
+ *
+ * TODO: Handle other flags, replace other static structs
+ * (e.g. handle NAND_BBT_FLASH for flash-based BBT,
+ * replace smallpage_flashbased)
+ *
+ */
+static int nand_create_default_bbt_descr(struct nand_chip *this)
+{
+ struct nand_bbt_descr *bd;
+ if (this->badblock_pattern) {
+ printk(KERN_WARNING "BBT descr already allocated; not replacing.\n");
+ return -EINVAL;
+ }
+ bd = kzalloc(sizeof(*bd), GFP_KERNEL);
+ if (!bd) {
+ printk(KERN_ERR "nand_create_default_bbt_descr: Out of memory\n");
+ return -ENOMEM;
+ }
+ bd->options = this->options & BBT_SCAN_OPTIONS;
+ bd->offs = this->badblockpos;
+ bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
+ bd->pattern = scan_ff_pattern;
+ bd->options |= NAND_BBT_DYNAMICSTRUCT;
+ this->badblock_pattern = bd;
+ return 0;
+}
+
/**
* nand_default_bbt - [NAND Interface] Select a default bad block table for the device
* @mtd: MTD device structure
} else {
this->bbt_td = NULL;
this->bbt_md = NULL;
- if (!this->badblock_pattern) {
- this->badblock_pattern = (mtd->writesize > 512) ?
- &largepage_memorybased : &smallpage_memorybased;
- }
+ if (!this->badblock_pattern)
+ nand_create_default_bbt_descr(this);
}
return nand_scan_bbt(mtd, this->badblock_pattern);
}
{"NAND 128MiB 3,3V 8-bit", 0xD1, 0, 128, 0, LP_OPTIONS},
{"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16},
{"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16},
+ {"NAND 128MiB 1,8V 16-bit", 0xAD, 0, 128, 0, LP_OPTIONS16},
/* 2 Gigabit */
{"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, LP_OPTIONS},
{"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, LP_OPTIONS16},
{"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16},
+ /* 32 Gigabit */
+ {"NAND 4GiB 3,3V 8-bit", 0xD7, 0, 4096, 0, LP_OPTIONS},
+
/*
* Renesas AND 1 Gigabit. Those chips do not support extended id and
* have a strange page/block layout ! The chosen minimum erasesize is
*/
static int init_nandsim(struct mtd_info *mtd)
{
- struct nand_chip *chip = (struct nand_chip *)mtd->priv;
- struct nandsim *ns = (struct nandsim *)(chip->priv);
+ struct nand_chip *chip = mtd->priv;
+ struct nandsim *ns = chip->priv;
int i, ret = 0;
uint64_t remains;
uint64_t next_offset;
static u_char ns_nand_read_byte(struct mtd_info *mtd)
{
- struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
u_char outb = 0x00;
/* Sanity and correctness checks */
static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
{
- struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
/* Sanity and correctness checks */
if (!ns->lines.ce) {
static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
- struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
/* Check that chip is expecting data input */
if (!(ns->state & STATE_DATAIN_MASK)) {
static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
- struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
/* Sanity and correctness checks */
if (!ns->lines.ce) {
*/
static void __exit ns_cleanup_module(void)
{
- struct nandsim *ns = (struct nandsim *)(((struct nand_chip *)nsmtd->priv)->priv);
+ struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv;
int i;
free_nandsim(ns); /* Free nandsim private resources */
struct ndfc_controller {
- struct of_device *ofdev;
+ struct platform_device *ofdev;
void __iomem *ndfcbase;
struct mtd_info mtd;
struct nand_chip chip;
return ret;
}
-static int __devinit ndfc_probe(struct of_device *ofdev,
+static int __devinit ndfc_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct ndfc_controller *ndfc = &ndfc_ctrl;
return 0;
}
-static int __devexit ndfc_remove(struct of_device *ofdev)
+static int __devexit ndfc_remove(struct platform_device *ofdev)
{
struct ndfc_controller *ndfc = dev_get_drvdata(&ofdev->dev);
return !!(inl(lpcctl) & LBICTRL_LPCCTL_NR);
}
-static int __devinit pasemi_nand_probe(struct of_device *ofdev,
+static int __devinit pasemi_nand_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct pci_dev *pdev;
return err;
}
-static int __devexit pasemi_nand_remove(struct of_device *ofdev)
+static int __devexit pasemi_nand_remove(struct platform_device *ofdev)
{
struct nand_chip *chip;
struct resource *res;
int err = 0;
+ if (pdata->chip.nr_chips < 1) {
+ dev_err(&pdev->dev, "invalid number of chips specified\n");
+ return -EINVAL;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENXIO;
}
/* Scan to find existance of the device */
- if (nand_scan(&data->mtd, 1)) {
+ if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
err = -ENXIO;
goto out;
}
/* returns pointer to our private structure */
static inline struct r852_device *r852_get_dev(struct mtd_info *mtd)
{
- struct nand_chip *chip = (struct nand_chip *)mtd->priv;
- return (struct r852_device *)chip->priv;
+ struct nand_chip *chip = mtd->priv;
+ return chip->priv;
}
*/
int r852_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
- struct r852_device *dev = (struct r852_device *)chip->priv;
+ struct r852_device *dev = chip->priv;
unsigned long timeout;
int status;
#include <linux/rslib.h>
#include <linux/bitrev.h>
#include <linux/module.h>
-#include <linux/mtd/compatmac.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
if (set == NULL)
return add_mtd_device(&mtd->mtd);
- if (set->nr_partitions == 0) {
- mtd->mtd.name = set->name;
- nr_part = parse_mtd_partitions(&mtd->mtd, part_probes,
- &part_info, 0);
- } else {
- if (set->nr_partitions > 0 && set->partitions != NULL) {
- nr_part = set->nr_partitions;
- part_info = set->partitions;
- }
+ mtd->mtd.name = set->name;
+ nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, &part_info, 0);
+
+ if (nr_part <= 0 && set->nr_partitions > 0) {
+ nr_part = set->nr_partitions;
+ part_info = set->partitions;
}
if (nr_part > 0 && part_info)
int sm_register_device(struct mtd_info *mtd, int smartmedia)
{
- struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+ struct nand_chip *chip = mtd->priv;
int ret;
chip->options |= NAND_SKIP_BBTSCAN;
/*
* Probe for the NAND device.
*/
-static int __devinit socrates_nand_probe(struct of_device *ofdev,
+static int __devinit socrates_nand_probe(struct platform_device *ofdev,
const struct of_device_id *ofid)
{
struct socrates_nand_host *host;
/*
* Remove a NAND device.
*/
-static int __devexit socrates_nand_remove(struct of_device *ofdev)
+static int __devexit socrates_nand_remove(struct platform_device *ofdev)
{
struct socrates_nand_host *host = dev_get_drvdata(&ofdev->dev);
struct mtd_info *mtd = &host->mtd;
-/* Linux driver for NAND Flash Translation Layer */
-/* (c) 1999 Machine Vision Holdings, Inc. */
-/* Author: David Woodhouse <dwmw2@infradead.org> */
-
/*
- The contents of this file are distributed under the GNU General
- Public License version 2. The author places no additional
- restrictions of any kind on it.
+ * Linux driver for NAND Flash Translation Layer
+ *
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define PRERELEASE
* NFTL mount code with extensive checks
*
* Author: Fabrice Bellard (fabrice.bellard@netgem.com)
- * Copyright (C) 2000 Netgem S.A.
+ * Copyright © 2000 Netgem S.A.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Flash partitions described by the OF (or flattened) device tree
*
- * Copyright (C) 2006 MontaVista Software Inc.
+ * Copyright © 2006 MontaVista Software Inc.
* Author: Vitaly Wool <vwool@ru.mvista.com>
*
* Revised to handle newer style flash binding by:
- * Copyright (C) 2007 David Gibson, IBM Corporation.
+ * Copyright © 2007 David Gibson, IBM Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
config MTD_ONENAND_OMAP2
tristate "OneNAND on OMAP2/OMAP3 support"
- depends on MTD_ONENAND && (ARCH_OMAP2 || ARCH_OMAP3)
+ depends on ARCH_OMAP2 || ARCH_OMAP3
help
Support for a OneNAND flash device connected to an OMAP2/OMAP3 CPU
via the GPMC memory controller.
config MTD_ONENAND_SAMSUNG
tristate "OneNAND on Samsung SOC controller support"
- depends on MTD_ONENAND && (ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210)
+ depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
help
Support for a OneNAND flash device connected to an Samsung SOC
S3C64XX/S5PC1XX controller.
default:
block = onenand_block(this, addr);
- page = (int) (addr - onenand_addr(this, block)) >> this->page_shift;
-
+ if (FLEXONENAND(this))
+ page = (int) (addr - onenand_addr(this, block))>>\
+ this->page_shift;
+ else
+ page = (int) (addr >> this->page_shift);
if (ONENAND_IS_2PLANE(this)) {
/* Make the even block number */
block &= ~1;
}
/**
- * onenand_probe - [OneNAND Interface] Probe the OneNAND device
+ * onenand_chip_probe - [OneNAND Interface] The generic chip probe
* @param mtd MTD device structure
*
* OneNAND detection method:
* Compare the values from command with ones from register
*/
-static int onenand_probe(struct mtd_info *mtd)
+static int onenand_chip_probe(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
- int bram_maf_id, bram_dev_id, maf_id, dev_id, ver_id;
- int density;
+ int bram_maf_id, bram_dev_id, maf_id, dev_id;
int syscfg;
/* Save system configuration 1 */
/* Restore system configuration 1 */
this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
- /* Workaround */
- if (syscfg & ONENAND_SYS_CFG1_SYNC_WRITE) {
- bram_maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
- bram_dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
- }
-
/* Check manufacturer ID */
if (onenand_check_maf(bram_maf_id))
return -ENXIO;
/* Read manufacturer and device IDs from Register */
maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
- ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
- this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
/* Check OneNAND device */
if (maf_id != bram_maf_id || dev_id != bram_dev_id)
return -ENXIO;
+ return 0;
+}
+
+/**
+ * onenand_probe - [OneNAND Interface] Probe the OneNAND device
+ * @param mtd MTD device structure
+ */
+static int onenand_probe(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ int maf_id, dev_id, ver_id;
+ int density;
+ int ret;
+
+ ret = this->chip_probe(mtd);
+ if (ret)
+ return ret;
+
+ /* Read manufacturer and device IDs from Register */
+ maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
+ dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
+ ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
+ this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
+
/* Flash device information */
onenand_print_device_info(dev_id, ver_id);
this->device_id = dev_id;
if (!this->unlock_all)
this->unlock_all = onenand_unlock_all;
+ if (!this->chip_probe)
+ this->chip_probe = onenand_chip_probe;
+
if (!this->read_bufferram)
this->read_bufferram = onenand_read_bufferram;
if (!this->write_bufferram)
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
-#include <linux/mtd/compatmac.h>
/**
* check_short_pattern - [GENERIC] check if a pattern is in the buffer
return 0;
}
+static int s5pc110_chip_probe(struct mtd_info *mtd)
+{
+ /* Now just return 0 */
+ return 0;
+}
+
static int s3c_onenand_bbt_wait(struct mtd_info *mtd, int state)
{
unsigned int flags = INT_ACT | LOAD_CMP;
/* Use generic onenand functions */
onenand->cmd_map = s5pc1xx_cmd_map;
this->read_bufferram = s5pc110_read_bufferram;
+ this->chip_probe = s5pc110_chip_probe;
return;
} else {
BUG();
struct mtd_info *mtd;
struct resource *r;
int size, err;
- unsigned long onenand_ctrl_cfg = 0;
pdata = pdev->dev.platform_data;
/* No need to check pdata. the platform data is optional */
}
onenand->phys_base = onenand->base_res->start;
-
- onenand_ctrl_cfg = readl(onenand->dma_addr + 0x100);
- if ((onenand_ctrl_cfg & ONENAND_SYS_CFG1_SYNC_WRITE) &&
- onenand->dma_addr)
- writel(onenand_ctrl_cfg & ~ONENAND_SYS_CFG1_SYNC_WRITE,
- onenand->dma_addr + 0x100);
- else
- onenand_ctrl_cfg = 0;
}
if (onenand_scan(mtd, 1)) {
goto scan_failed;
}
- if (onenand->type == TYPE_S5PC110) {
- if (onenand_ctrl_cfg && onenand->dma_addr)
- writel(onenand_ctrl_cfg, onenand->dma_addr + 0x100);
- } else {
+ if (onenand->type != TYPE_S5PC110) {
/* S3C doesn't handle subpage write */
mtd->subpage_sft = 0;
this->subpagesize = mtd->writesize;
/*
* Parse RedBoot-style Flash Image System (FIS) tables and
* produce a Linux partition array to match.
+ *
+ * Copyright © 2001 Red Hat UK Limited
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#include <linux/kernel.h>
/*
* rfd_ftl.c -- resident flash disk (flash translation layer)
*
- * Copyright (C) 2005 Sean Young <sean@mess.org>
+ * Copyright © 2005 Sean Young <sean@mess.org>
*
* This type of flash translation layer (FTL) is used by the Embedded BIOS
* by General Software. It is known as the Resident Flash Disk (RFD), see:
/*
* Linux driver for SSFDC Flash Translation Layer (Read only)
- * (c) 2005 Eptar srl
+ * © 2005 Eptar srl
* Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
*
* Based on NTFL and MTDBLOCK_RO drivers
static int erasecrosstest(void)
{
size_t read = 0, written = 0;
- int err = 0, i, ebnum, ok = 1, ebnum2;
+ int err = 0, i, ebnum, ebnum2;
loff_t addr0;
char *readbuf = twopages;
if (memcmp(writebuf, readbuf, pgsize)) {
printk(PRINT_PREF "verify failed!\n");
errcnt += 1;
- ok = 0;
- return err;
+ return -1;
}
printk(PRINT_PREF "erasing block %d\n", ebnum);
if (memcmp(writebuf, readbuf, pgsize)) {
printk(PRINT_PREF "verify failed!\n");
errcnt += 1;
- ok = 0;
+ return -1;
}
- if (ok && !err)
+ if (!err)
printk(PRINT_PREF "erasecrosstest ok\n");
return err;
}
static spinlock_t mdio_lock;
static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */
-struct mii_bus *mdio_bus;
+static struct mii_bus *mdio_bus;
static int ports_open;
static struct port *npe_port_tab[MAX_NPES];
static struct dma_pool *dma_pool;
#include <net/caif/caif_spi.h>
#ifndef CONFIG_CAIF_SPI_SYNC
-#define SPI_DATA_POS SPI_CMD_SZ
+#define SPI_DATA_POS 0
static inline int forward_to_spi_cmd(struct cfspi *cfspi)
{
return cfspi->rx_cpck_len;
}
#else
-#define SPI_DATA_POS 0
+#define SPI_DATA_POS SPI_CMD_SZ
static inline int forward_to_spi_cmd(struct cfspi *cfspi)
{
return 0;
struct mpc5xxx_can_data {
unsigned int type;
- u32 (*get_clock)(struct of_device *ofdev, const char *clock_name,
+ u32 (*get_clock)(struct platform_device *ofdev, const char *clock_name,
int *mscan_clksrc);
};
{}
};
-static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
+static u32 __devinit mpc52xx_can_get_clock(struct platform_device *ofdev,
const char *clock_name,
int *mscan_clksrc)
{
return freq;
}
#else /* !CONFIG_PPC_MPC52xx */
-static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
+static u32 __devinit mpc52xx_can_get_clock(struct platform_device *ofdev,
const char *clock_name,
int *mscan_clksrc)
{
{}
};
-static u32 __devinit mpc512x_can_get_clock(struct of_device *ofdev,
+static u32 __devinit mpc512x_can_get_clock(struct platform_device *ofdev,
const char *clock_name,
int *mscan_clksrc)
{
return freq;
}
#else /* !CONFIG_PPC_MPC512x */
-static u32 __devinit mpc512x_can_get_clock(struct of_device *ofdev,
+static u32 __devinit mpc512x_can_get_clock(struct platform_device *ofdev,
const char *clock_name,
int *mscan_clksrc)
{
}
#endif /* CONFIG_PPC_MPC512x */
-static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
+static int __devinit mpc5xxx_can_probe(struct platform_device *ofdev,
const struct of_device_id *id)
{
struct mpc5xxx_can_data *data = (struct mpc5xxx_can_data *)id->data;
return err;
}
-static int __devexit mpc5xxx_can_remove(struct of_device *ofdev)
+static int __devexit mpc5xxx_can_remove(struct platform_device *ofdev)
{
struct net_device *dev = dev_get_drvdata(&ofdev->dev);
struct mscan_priv *priv = netdev_priv(dev);
#ifdef CONFIG_PM
static struct mscan_regs saved_regs;
-static int mpc5xxx_can_suspend(struct of_device *ofdev, pm_message_t state)
+static int mpc5xxx_can_suspend(struct platform_device *ofdev, pm_message_t state)
{
struct net_device *dev = dev_get_drvdata(&ofdev->dev);
struct mscan_priv *priv = netdev_priv(dev);
return 0;
}
-static int mpc5xxx_can_resume(struct of_device *ofdev)
+static int mpc5xxx_can_resume(struct platform_device *ofdev)
{
struct net_device *dev = dev_get_drvdata(&ofdev->dev);
struct mscan_priv *priv = netdev_priv(dev);
out_8(priv->reg_base + reg, val);
}
-static int __devexit sja1000_ofp_remove(struct of_device *ofdev)
+static int __devexit sja1000_ofp_remove(struct platform_device *ofdev)
{
struct net_device *dev = dev_get_drvdata(&ofdev->dev);
struct sja1000_priv *priv = netdev_priv(dev);
return 0;
}
-static int __devinit sja1000_ofp_probe(struct of_device *ofdev,
+static int __devinit sja1000_ofp_probe(struct platform_device *ofdev,
const struct of_device_id *id)
{
struct device_node *np = ofdev->dev.of_node;
struct ehea_adapter {
u64 handle;
- struct of_device *ofdev;
+ struct platform_device *ofdev;
struct ehea_port *port[EHEA_MAX_PORTS];
struct ehea_eq *neq; /* notification event queue */
struct tasklet_struct neq_tasklet;
struct net_device *netdev;
struct net_device_stats stats;
struct ehea_port_res port_res[EHEA_MAX_PORT_RES];
- struct of_device ofdev; /* Open Firmware Device */
+ struct platform_device ofdev; /* Open Firmware Device */
struct ehea_mc_list *mc_list; /* Multicast MAC addresses */
struct vlan_group *vgrp;
struct ehea_eq *qp_eq;
struct ehea_bcmc_reg_array ehea_bcmc_regs;
-static int __devinit ehea_probe_adapter(struct of_device *dev,
+static int __devinit ehea_probe_adapter(struct platform_device *dev,
const struct of_device_id *id);
-static int __devexit ehea_remove(struct of_device *dev);
+static int __devexit ehea_remove(struct platform_device *dev);
static struct of_device_id ehea_device_table[] = {
{
static DEVICE_ATTR(probe_port, S_IWUSR, NULL, ehea_probe_port);
static DEVICE_ATTR(remove_port, S_IWUSR, NULL, ehea_remove_port);
-int ehea_create_device_sysfs(struct of_device *dev)
+int ehea_create_device_sysfs(struct platform_device *dev)
{
int ret = device_create_file(&dev->dev, &dev_attr_probe_port);
if (ret)
return ret;
}
-void ehea_remove_device_sysfs(struct of_device *dev)
+void ehea_remove_device_sysfs(struct platform_device *dev)
{
device_remove_file(&dev->dev, &dev_attr_probe_port);
device_remove_file(&dev->dev, &dev_attr_remove_port);
}
-static int __devinit ehea_probe_adapter(struct of_device *dev,
+static int __devinit ehea_probe_adapter(struct platform_device *dev,
const struct of_device_id *id)
{
struct ehea_adapter *adapter;
return ret;
}
-static int __devexit ehea_remove(struct of_device *dev)
+static int __devexit ehea_remove(struct platform_device *dev)
{
struct ehea_adapter *adapter = dev_get_drvdata(&dev->dev);
int i;
/* ======================================================================== */
static int __devinit
-mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
+mpc52xx_fec_probe(struct platform_device *op, const struct of_device_id *match)
{
int rv;
struct net_device *ndev;
}
static int
-mpc52xx_fec_remove(struct of_device *op)
+mpc52xx_fec_remove(struct platform_device *op)
{
struct net_device *ndev;
struct mpc52xx_fec_priv *priv;
}
#ifdef CONFIG_PM
-static int mpc52xx_fec_of_suspend(struct of_device *op, pm_message_t state)
+static int mpc52xx_fec_of_suspend(struct platform_device *op, pm_message_t state)
{
struct net_device *dev = dev_get_drvdata(&op->dev);
return 0;
}
-static int mpc52xx_fec_of_resume(struct of_device *op)
+static int mpc52xx_fec_of_resume(struct platform_device *op)
{
struct net_device *dev = dev_get_drvdata(&op->dev);
data | FEC_MII_WRITE_FRAME);
}
-static int mpc52xx_fec_mdio_probe(struct of_device *of,
+static int mpc52xx_fec_mdio_probe(struct platform_device *of,
const struct of_device_id *match)
{
struct device *dev = &of->dev;
return err;
}
-static int mpc52xx_fec_mdio_remove(struct of_device *of)
+static int mpc52xx_fec_mdio_remove(struct platform_device *of)
{
struct device *dev = &of->dev;
struct mii_bus *bus = dev_get_drvdata(dev);
#endif
};
-static int __devinit fs_enet_probe(struct of_device *ofdev,
+static int __devinit fs_enet_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct net_device *ndev;
return ret;
}
-static int fs_enet_remove(struct of_device *ofdev)
+static int fs_enet_remove(struct platform_device *ofdev)
{
struct net_device *ndev = dev_get_drvdata(&ofdev->dev);
struct fs_enet_private *fep = netdev_priv(ndev);
static int do_pd_setup(struct fs_enet_private *fep)
{
- struct of_device *ofdev = to_of_device(fep->dev);
+ struct platform_device *ofdev = to_platform_device(fep->dev);
struct fs_platform_info *fpi = fep->fpi;
int ret = -EINVAL;
static int do_pd_setup(struct fs_enet_private *fep)
{
- struct of_device *ofdev = to_of_device(fep->dev);
+ struct platform_device *ofdev = to_platform_device(fep->dev);
fep->interrupt = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
if (fep->interrupt == NO_IRQ)
static int do_pd_setup(struct fs_enet_private *fep)
{
- struct of_device *ofdev = to_of_device(fep->dev);
+ struct platform_device *ofdev = to_platform_device(fep->dev);
fep->interrupt = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
if (fep->interrupt == NO_IRQ)
return 0;
}
-static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
+static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct mii_bus *new_bus;
return ret;
}
-static int fs_enet_mdio_remove(struct of_device *ofdev)
+static int fs_enet_mdio_remove(struct platform_device *ofdev)
{
struct mii_bus *bus = dev_get_drvdata(&ofdev->dev);
struct bb_info *bitbang = bus->priv;
return 0;
}
-static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
+static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct resource res;
return ret;
}
-static int fs_enet_mdio_remove(struct of_device *ofdev)
+static int fs_enet_mdio_remove(struct platform_device *ofdev)
{
struct mii_bus *bus = dev_get_drvdata(&ofdev->dev);
struct fec_info *fec = bus->priv;
#endif
-static int fsl_pq_mdio_probe(struct of_device *ofdev,
+static int fsl_pq_mdio_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
}
-static int fsl_pq_mdio_remove(struct of_device *ofdev)
+static int fsl_pq_mdio_remove(struct platform_device *ofdev)
{
struct device *device = &ofdev->dev;
struct mii_bus *bus = dev_get_drvdata(device);
static void adjust_link(struct net_device *dev);
static void init_registers(struct net_device *dev);
static int init_phy(struct net_device *dev);
-static int gfar_probe(struct of_device *ofdev,
+static int gfar_probe(struct platform_device *ofdev,
const struct of_device_id *match);
-static int gfar_remove(struct of_device *ofdev);
+static int gfar_remove(struct platform_device *ofdev);
static void free_skb_resources(struct gfar_private *priv);
static void gfar_set_multi(struct net_device *dev);
static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
return 0;
}
-static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev)
+static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
{
const char *model;
const char *ctype;
/* Set up the ethernet device structure, private data,
* and anything else we need before we start */
-static int gfar_probe(struct of_device *ofdev,
+static int gfar_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
u32 tempval;
return err;
}
-static int gfar_remove(struct of_device *ofdev)
+static int gfar_remove(struct platform_device *ofdev)
{
struct gfar_private *priv = dev_get_drvdata(&ofdev->dev);
struct device_node *node;
struct net_device *ndev;
- struct of_device *ofdev;
+ struct platform_device *ofdev;
enum gfar_errata errata;
struct gfar_priv_grp gfargrp[MAXGROUPS];
}
/* Initialize the GRETH MAC */
-static int __devinit greth_of_probe(struct of_device *ofdev, const struct of_device_id *match)
+static int __devinit greth_of_probe(struct platform_device *ofdev, const struct of_device_id *match)
{
struct net_device *dev;
struct greth_private *greth;
}
regs = (struct greth_regs *) greth->regs;
- greth->irq = ofdev->irqs[0];
+ greth->irq = ofdev->archdata.irqs[0];
dev_set_drvdata(greth->dev, dev);
SET_NETDEV_DEV(dev, greth->dev);
return err;
}
-static int __devexit greth_of_remove(struct of_device *of_dev)
+static int __devexit greth_of_remove(struct platform_device *of_dev)
{
struct net_device *ndev = dev_get_drvdata(&of_dev->dev);
struct greth_private *greth = netdev_priv(ndev);
int irq;
- struct device *dev; /* Pointer to of_device->dev */
+ struct device *dev; /* Pointer to platform_device->dev */
struct net_device *netdev;
struct napi_struct napi;
spinlock_t devlock;
struct emac_depentry {
u32 phandle;
struct device_node *node;
- struct of_device *ofdev;
+ struct platform_device *ofdev;
void *drvdata;
};
.ndo_change_mtu = emac_change_mtu,
};
-static int __devinit emac_probe(struct of_device *ofdev,
+static int __devinit emac_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct net_device *ndev;
return err;
}
-static int __devexit emac_remove(struct of_device *ofdev)
+static int __devexit emac_remove(struct platform_device *ofdev)
{
struct emac_instance *dev = dev_get_drvdata(&ofdev->dev);
struct net_device *ndev;
struct resource rsrc_regs;
struct emac_regs __iomem *emacp;
- struct of_device *ofdev;
+ struct platform_device *ofdev;
struct device_node **blist; /* bootlist entry */
/* MAL linkage */
u32 mal_ph;
- struct of_device *mal_dev;
+ struct platform_device *mal_dev;
u32 mal_rx_chan;
u32 mal_tx_chan;
struct mal_instance *mal;
/* Shared MDIO if any */
u32 mdio_ph;
- struct of_device *mdio_dev;
+ struct platform_device *mdio_dev;
struct emac_instance *mdio_instance;
struct mutex mdio_lock;
/* ZMII infos if any */
u32 zmii_ph;
u32 zmii_port;
- struct of_device *zmii_dev;
+ struct platform_device *zmii_dev;
/* RGMII infos if any */
u32 rgmii_ph;
u32 rgmii_port;
- struct of_device *rgmii_dev;
+ struct platform_device *rgmii_dev;
/* TAH infos if any */
u32 tah_ph;
u32 tah_port;
- struct of_device *tah_dev;
+ struct platform_device *tah_dev;
/* IRQs */
int wol_irq;
return regs + 1;
}
-static int __devinit mal_probe(struct of_device *ofdev,
+static int __devinit mal_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct mal_instance *mal;
return err;
}
-static int __devexit mal_remove(struct of_device *ofdev)
+static int __devexit mal_remove(struct platform_device *ofdev)
{
struct mal_instance *mal = dev_get_drvdata(&ofdev->dev);
dma_addr_t bd_dma;
struct mal_descriptor *bd_virt;
- struct of_device *ofdev;
+ struct platform_device *ofdev;
int index;
spinlock_t lock;
}
}
-int __devinit rgmii_attach(struct of_device *ofdev, int input, int mode)
+int __devinit rgmii_attach(struct platform_device *ofdev, int input, int mode)
{
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
struct rgmii_regs __iomem *p = dev->base;
return 0;
}
-void rgmii_set_speed(struct of_device *ofdev, int input, int speed)
+void rgmii_set_speed(struct platform_device *ofdev, int input, int speed)
{
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
struct rgmii_regs __iomem *p = dev->base;
mutex_unlock(&dev->lock);
}
-void rgmii_get_mdio(struct of_device *ofdev, int input)
+void rgmii_get_mdio(struct platform_device *ofdev, int input)
{
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
struct rgmii_regs __iomem *p = dev->base;
DBG2(dev, " fer = 0x%08x\n", fer);
}
-void rgmii_put_mdio(struct of_device *ofdev, int input)
+void rgmii_put_mdio(struct platform_device *ofdev, int input)
{
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
struct rgmii_regs __iomem *p = dev->base;
mutex_unlock(&dev->lock);
}
-void rgmii_detach(struct of_device *ofdev, int input)
+void rgmii_detach(struct platform_device *ofdev, int input)
{
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
struct rgmii_regs __iomem *p;
mutex_unlock(&dev->lock);
}
-int rgmii_get_regs_len(struct of_device *ofdev)
+int rgmii_get_regs_len(struct platform_device *ofdev)
{
return sizeof(struct emac_ethtool_regs_subhdr) +
sizeof(struct rgmii_regs);
}
-void *rgmii_dump_regs(struct of_device *ofdev, void *buf)
+void *rgmii_dump_regs(struct platform_device *ofdev, void *buf)
{
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
struct emac_ethtool_regs_subhdr *hdr = buf;
}
-static int __devinit rgmii_probe(struct of_device *ofdev,
+static int __devinit rgmii_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
return rc;
}
-static int __devexit rgmii_remove(struct of_device *ofdev)
+static int __devexit rgmii_remove(struct platform_device *ofdev)
{
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
int users;
/* OF device instance */
- struct of_device *ofdev;
+ struct platform_device *ofdev;
};
#ifdef CONFIG_IBM_NEW_EMAC_RGMII
extern int rgmii_init(void);
extern void rgmii_exit(void);
-extern int rgmii_attach(struct of_device *ofdev, int input, int mode);
-extern void rgmii_detach(struct of_device *ofdev, int input);
-extern void rgmii_get_mdio(struct of_device *ofdev, int input);
-extern void rgmii_put_mdio(struct of_device *ofdev, int input);
-extern void rgmii_set_speed(struct of_device *ofdev, int input, int speed);
-extern int rgmii_get_regs_len(struct of_device *ofdev);
-extern void *rgmii_dump_regs(struct of_device *ofdev, void *buf);
+extern int rgmii_attach(struct platform_device *ofdev, int input, int mode);
+extern void rgmii_detach(struct platform_device *ofdev, int input);
+extern void rgmii_get_mdio(struct platform_device *ofdev, int input);
+extern void rgmii_put_mdio(struct platform_device *ofdev, int input);
+extern void rgmii_set_speed(struct platform_device *ofdev, int input, int speed);
+extern int rgmii_get_regs_len(struct platform_device *ofdev);
+extern void *rgmii_dump_regs(struct platform_device *ofdev, void *buf);
#else
#include "emac.h"
#include "core.h"
-int __devinit tah_attach(struct of_device *ofdev, int channel)
+int __devinit tah_attach(struct platform_device *ofdev, int channel)
{
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);
return 0;
}
-void tah_detach(struct of_device *ofdev, int channel)
+void tah_detach(struct platform_device *ofdev, int channel)
{
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);
mutex_unlock(&dev->lock);
}
-void tah_reset(struct of_device *ofdev)
+void tah_reset(struct platform_device *ofdev)
{
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);
struct tah_regs __iomem *p = dev->base;
TAH_MR_DIG);
}
-int tah_get_regs_len(struct of_device *ofdev)
+int tah_get_regs_len(struct platform_device *ofdev)
{
return sizeof(struct emac_ethtool_regs_subhdr) +
sizeof(struct tah_regs);
}
-void *tah_dump_regs(struct of_device *ofdev, void *buf)
+void *tah_dump_regs(struct platform_device *ofdev, void *buf)
{
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);
struct emac_ethtool_regs_subhdr *hdr = buf;
return regs + 1;
}
-static int __devinit tah_probe(struct of_device *ofdev,
+static int __devinit tah_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
return rc;
}
-static int __devexit tah_remove(struct of_device *ofdev)
+static int __devexit tah_remove(struct platform_device *ofdev)
{
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);
int users;
/* OF device instance */
- struct of_device *ofdev;
+ struct platform_device *ofdev;
};
extern int tah_init(void);
extern void tah_exit(void);
-extern int tah_attach(struct of_device *ofdev, int channel);
-extern void tah_detach(struct of_device *ofdev, int channel);
-extern void tah_reset(struct of_device *ofdev);
-extern int tah_get_regs_len(struct of_device *ofdev);
-extern void *tah_dump_regs(struct of_device *ofdev, void *buf);
+extern int tah_attach(struct platform_device *ofdev, int channel);
+extern void tah_detach(struct platform_device *ofdev, int channel);
+extern void tah_reset(struct platform_device *ofdev);
+extern int tah_get_regs_len(struct platform_device *ofdev);
+extern void *tah_dump_regs(struct platform_device *ofdev, void *buf);
#else
}
}
-int __devinit zmii_attach(struct of_device *ofdev, int input, int *mode)
+int __devinit zmii_attach(struct platform_device *ofdev, int input, int *mode)
{
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
struct zmii_regs __iomem *p = dev->base;
return 0;
}
-void zmii_get_mdio(struct of_device *ofdev, int input)
+void zmii_get_mdio(struct platform_device *ofdev, int input)
{
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
u32 fer;
out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input));
}
-void zmii_put_mdio(struct of_device *ofdev, int input)
+void zmii_put_mdio(struct platform_device *ofdev, int input)
{
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
}
-void zmii_set_speed(struct of_device *ofdev, int input, int speed)
+void zmii_set_speed(struct platform_device *ofdev, int input, int speed)
{
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
u32 ssr;
mutex_unlock(&dev->lock);
}
-void zmii_detach(struct of_device *ofdev, int input)
+void zmii_detach(struct platform_device *ofdev, int input)
{
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
mutex_unlock(&dev->lock);
}
-int zmii_get_regs_len(struct of_device *ofdev)
+int zmii_get_regs_len(struct platform_device *ofdev)
{
return sizeof(struct emac_ethtool_regs_subhdr) +
sizeof(struct zmii_regs);
}
-void *zmii_dump_regs(struct of_device *ofdev, void *buf)
+void *zmii_dump_regs(struct platform_device *ofdev, void *buf)
{
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
struct emac_ethtool_regs_subhdr *hdr = buf;
return regs + 1;
}
-static int __devinit zmii_probe(struct of_device *ofdev,
+static int __devinit zmii_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
return rc;
}
-static int __devexit zmii_remove(struct of_device *ofdev)
+static int __devexit zmii_remove(struct platform_device *ofdev)
{
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
u32 fer_save;
/* OF device instance */
- struct of_device *ofdev;
+ struct platform_device *ofdev;
};
#ifdef CONFIG_IBM_NEW_EMAC_ZMII
extern int zmii_init(void);
extern void zmii_exit(void);
-extern int zmii_attach(struct of_device *ofdev, int input, int *mode);
-extern void zmii_detach(struct of_device *ofdev, int input);
-extern void zmii_get_mdio(struct of_device *ofdev, int input);
-extern void zmii_put_mdio(struct of_device *ofdev, int input);
-extern void zmii_set_speed(struct of_device *ofdev, int input, int speed);
-extern int zmii_get_regs_len(struct of_device *ocpdev);
-extern void *zmii_dump_regs(struct of_device *ofdev, void *buf);
+extern int zmii_attach(struct platform_device *ofdev, int input, int *mode);
+extern void zmii_detach(struct platform_device *ofdev, int input);
+extern void zmii_get_mdio(struct platform_device *ofdev, int input);
+extern void zmii_put_mdio(struct platform_device *ofdev, int input);
+extern void zmii_set_speed(struct platform_device *ofdev, int input, int speed);
+extern int zmii_get_regs_len(struct platform_device *ocpdev);
+extern void *zmii_dump_regs(struct platform_device *ofdev, void *buf);
#else
# define zmii_init() 0
struct net_device *ndev;
struct sh_irda_self *self;
struct resource *res;
- char clk_name[8];
int irq;
int err = -ENOMEM;
if (err)
goto err_mem_2;
- snprintf(clk_name, sizeof(clk_name), "irda%d", pdev->id);
- self->clk = clk_get(&pdev->dev, clk_name);
+ self->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(self->clk)) {
- dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+ dev_err(&pdev->dev, "cannot get irda clock\n");
goto err_mem_3;
}
* temac_dcr_setup - If the DMA is DCR based, then setup the address and
* I/O functions
*/
-static int temac_dcr_setup(struct temac_local *lp, struct of_device *op,
+static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op,
struct device_node *np)
{
unsigned int dcrs;
* temac_dcr_setup - This is a stub for when DCR is not supported,
* such as with MicroBlaze
*/
-static int temac_dcr_setup(struct temac_local *lp, struct of_device *op,
+static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op,
struct device_node *np)
{
return -1;
};
static int __init
-temac_of_probe(struct of_device *op, const struct of_device_id *match)
+temac_of_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *np;
struct temac_local *lp;
return rc;
}
-static int __devexit temac_of_remove(struct of_device *op)
+static int __devexit temac_of_remove(struct platform_device *op)
{
struct net_device *ndev = dev_get_drvdata(&op->dev);
struct temac_local *lp = netdev_priv(ndev);
int watchdog_resets;
int watchdog_pause;
int pause;
+ bool fw_name_allocated;
char *fw_name;
char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
char *product_code_string;
MODULE_FIRMWARE("myri10ge_rss_ethp_z8e.dat");
MODULE_FIRMWARE("myri10ge_rss_eth_z8e.dat");
+/* Careful: must be accessed under kparam_block_sysfs_write */
static char *myri10ge_fw_name = NULL;
module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
static struct net_device_stats *myri10ge_get_stats(struct net_device *dev);
+static void set_fw_name(struct myri10ge_priv *mgp, char *name, bool allocated)
+{
+ if (mgp->fw_name_allocated)
+ kfree(mgp->fw_name);
+ mgp->fw_name = name;
+ mgp->fw_name_allocated = allocated;
+}
+
static int
myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
struct myri10ge_cmd *data, int atomic)
dev_warn(&mgp->pdev->dev, "via hotplug\n");
}
- mgp->fw_name = "adopted";
+ set_fw_name(mgp, "adopted", false);
mgp->tx_boundary = 2048;
myri10ge_dummy_rdma(mgp, 1);
status = myri10ge_get_firmware_capabilities(mgp);
* load the optimized firmware (which assumes aligned PCIe
* completions) in order to see if it works on this host.
*/
- mgp->fw_name = myri10ge_fw_aligned;
+ set_fw_name(mgp, myri10ge_fw_aligned, false);
status = myri10ge_load_firmware(mgp, 1);
if (status != 0) {
goto abort;
abort:
/* fall back to using the unaligned firmware */
mgp->tx_boundary = 2048;
- mgp->fw_name = myri10ge_fw_unaligned;
+ set_fw_name(mgp, myri10ge_fw_unaligned, false);
}
dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
link_width);
mgp->tx_boundary = 4096;
- mgp->fw_name = myri10ge_fw_aligned;
+ set_fw_name(mgp, myri10ge_fw_aligned, false);
} else {
myri10ge_firmware_probe(mgp);
}
dev_info(&mgp->pdev->dev,
"Assuming aligned completions (forced)\n");
mgp->tx_boundary = 4096;
- mgp->fw_name = myri10ge_fw_aligned;
+ set_fw_name(mgp, myri10ge_fw_aligned, false);
} else {
dev_info(&mgp->pdev->dev,
"Assuming unaligned completions (forced)\n");
mgp->tx_boundary = 2048;
- mgp->fw_name = myri10ge_fw_unaligned;
+ set_fw_name(mgp, myri10ge_fw_unaligned, false);
}
}
+
+ kparam_block_sysfs_write(myri10ge_fw_name);
if (myri10ge_fw_name != NULL) {
- overridden = 1;
- mgp->fw_name = myri10ge_fw_name;
+ char *fw_name = kstrdup(myri10ge_fw_name, GFP_KERNEL);
+ if (fw_name) {
+ overridden = 1;
+ set_fw_name(mgp, fw_name, true);
+ }
}
+ kparam_unblock_sysfs_write(myri10ge_fw_name);
+
if (mgp->board_number < MYRI10GE_MAX_BOARDS &&
myri10ge_fw_names[mgp->board_number] != NULL &&
strlen(myri10ge_fw_names[mgp->board_number])) {
- mgp->fw_name = myri10ge_fw_names[mgp->board_number];
+ set_fw_name(mgp, myri10ge_fw_names[mgp->board_number], false);
overridden = 1;
}
if (overridden)
struct myri10ge_cmd cmd;
struct pci_dev *pdev = mgp->pdev;
char *old_fw;
+ bool old_allocated;
int i, status, ncpus, msix_cap;
mgp->num_slices = 1;
/* try to load the slice aware rss firmware */
old_fw = mgp->fw_name;
+ old_allocated = mgp->fw_name_allocated;
+ /* don't free old_fw if we override it. */
+ mgp->fw_name_allocated = false;
+
if (myri10ge_fw_name != NULL) {
dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
myri10ge_fw_name);
- mgp->fw_name = myri10ge_fw_name;
+ set_fw_name(mgp, myri10ge_fw_name, false);
} else if (old_fw == myri10ge_fw_aligned)
- mgp->fw_name = myri10ge_fw_rss_aligned;
+ set_fw_name(mgp, myri10ge_fw_rss_aligned, false);
else
- mgp->fw_name = myri10ge_fw_rss_unaligned;
+ set_fw_name(mgp, myri10ge_fw_rss_unaligned, false);
status = myri10ge_load_firmware(mgp, 0);
if (status != 0) {
dev_info(&pdev->dev, "Rss firmware not found\n");
+ if (old_allocated)
+ kfree(old_fw);
return;
}
mgp->num_slices);
if (status == 0) {
pci_disable_msix(pdev);
+ if (old_allocated)
+ kfree(old_fw);
return;
}
if (status > 0)
abort_with_fw:
mgp->num_slices = 1;
- mgp->fw_name = old_fw;
+ set_fw_name(mgp, old_fw, old_allocated);
myri10ge_load_firmware(mgp, 0);
}
pci_disable_device(pdev);
abort_with_netdev:
+ set_fw_name(mgp, NULL, false);
free_netdev(netdev);
return status;
}
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
mgp->cmd, mgp->cmd_bus);
+ set_fw_name(mgp, NULL, false);
free_netdev(netdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
.ndo_validate_addr = eth_validate_addr,
};
-static int __devinit myri_sbus_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit myri_sbus_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
static unsigned version_printed;
return -ENODEV;
}
-static int __devexit myri_sbus_remove(struct of_device *op)
+static int __devexit myri_sbus_remove(struct platform_device *op)
{
struct myri_eth *mp = dev_get_drvdata(&op->dev);
struct net_device *net_dev = mp->dev;
struct myri_eeprom eeprom; /* Local copy of EEPROM. */
unsigned int reg_size; /* Size of register space. */
unsigned int shmem_base; /* Offset to shared ram. */
- struct of_device *myri_op; /* Our OF device struct. */
+ struct platform_device *myri_op; /* Our OF device struct. */
};
/* We use this to acquire receive skb's that we can DMA directly into. */
static int __devinit niu_n2_irq_init(struct niu *np, u8 *ldg_num_map)
{
#ifdef CONFIG_SPARC64
- struct of_device *op = np->op;
+ struct platform_device *op = np->op;
const u32 *int_prop;
int i;
static struct net_device * __devinit niu_alloc_and_init(
struct device *gen_dev, struct pci_dev *pdev,
- struct of_device *op, const struct niu_ops *ops,
+ struct platform_device *op, const struct niu_ops *ops,
u8 port)
{
struct net_device *dev;
.unmap_single = niu_phys_unmap_single,
};
-static int __devinit niu_of_probe(struct of_device *op,
+static int __devinit niu_of_probe(struct platform_device *op,
const struct of_device_id *match)
{
union niu_parent_id parent_id;
return err;
}
-static int __devexit niu_of_remove(struct of_device *op)
+static int __devexit niu_of_remove(struct platform_device *op)
{
struct net_device *dev = dev_get_drvdata(&op->dev);
}
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+ link->io_lines = 10;
if (local->modem) {
int pass;
}
printk(KNOT_XIRC "no ports available\n");
} else {
- link->io_lines = 10;
link->resource[0]->end = 16;
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
link->resource[0]->start = ioaddr;
menuconfig PHYLIB
tristate "PHY Device support and infrastructure"
depends on !S390
- depends on NET_ETHERNET
+ depends on NETDEVICES
help
Ethernet controllers are usually attached to PHY
devices. This option provides infrastructure for
#ifdef CONFIG_OF_GPIO
-static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
+static int __devinit mdio_ofgpio_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct mdio_gpio_platform_data *pdata;
return -ENODEV;
}
-static int __devexit mdio_ofgpio_remove(struct of_device *ofdev)
+static int __devexit mdio_ofgpio_remove(struct platform_device *ofdev)
{
mdio_gpio_bus_destroy(&ofdev->dev);
kfree(ofdev->dev.platform_data);
/**
* phy_mii_ioctl - generic PHY MII ioctl interface
* @phydev: the phy_device struct
- * @mii_data: MII ioctl data
+ * @ifr: &struct ifreq for socket ioctl's
* @cmd: ioctl cmd to execute
*
* Note that this function is currently incompatible with the
static int
qlcnic_init_pci_info(struct qlcnic_adapter *adapter)
{
- struct qlcnic_pci_info pci_info[QLCNIC_MAX_PCI_FUNC];
+ struct qlcnic_pci_info *pci_info;
int i, ret = 0, err;
u8 pfn;
- if (!adapter->npars)
- adapter->npars = kzalloc(sizeof(struct qlcnic_npar_info) *
- QLCNIC_MAX_PCI_FUNC, GFP_KERNEL);
- if (!adapter->npars)
+ pci_info = kcalloc(QLCNIC_MAX_PCI_FUNC, sizeof(*pci_info), GFP_KERNEL);
+ if (!pci_info)
return -ENOMEM;
- if (!adapter->eswitch)
- adapter->eswitch = kzalloc(sizeof(struct qlcnic_eswitch) *
+ adapter->npars = kzalloc(sizeof(struct qlcnic_npar_info) *
+ QLCNIC_MAX_PCI_FUNC, GFP_KERNEL);
+ if (!adapter->npars) {
+ err = -ENOMEM;
+ goto err_pci_info;
+ }
+
+ adapter->eswitch = kzalloc(sizeof(struct qlcnic_eswitch) *
QLCNIC_NIU_MAX_XG_PORTS, GFP_KERNEL);
if (!adapter->eswitch) {
err = -ENOMEM;
- goto err_eswitch;
+ goto err_npars;
}
ret = qlcnic_get_pci_info(adapter, pci_info);
- if (!ret) {
- for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
- pfn = pci_info[i].id;
- if (pfn > QLCNIC_MAX_PCI_FUNC)
- return QL_STATUS_INVALID_PARAM;
- adapter->npars[pfn].active = pci_info[i].active;
- adapter->npars[pfn].type = pci_info[i].type;
- adapter->npars[pfn].phy_port = pci_info[i].default_port;
- adapter->npars[pfn].mac_learning = DEFAULT_MAC_LEARN;
- adapter->npars[pfn].min_bw = pci_info[i].tx_min_bw;
- adapter->npars[pfn].max_bw = pci_info[i].tx_max_bw;
- }
-
- for (i = 0; i < QLCNIC_NIU_MAX_XG_PORTS; i++)
- adapter->eswitch[i].flags |= QLCNIC_SWITCH_ENABLE;
+ if (ret)
+ goto err_eswitch;
- return ret;
+ for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
+ pfn = pci_info[i].id;
+ if (pfn > QLCNIC_MAX_PCI_FUNC)
+ return QL_STATUS_INVALID_PARAM;
+ adapter->npars[pfn].active = pci_info[i].active;
+ adapter->npars[pfn].type = pci_info[i].type;
+ adapter->npars[pfn].phy_port = pci_info[i].default_port;
+ adapter->npars[pfn].mac_learning = DEFAULT_MAC_LEARN;
+ adapter->npars[pfn].min_bw = pci_info[i].tx_min_bw;
+ adapter->npars[pfn].max_bw = pci_info[i].tx_max_bw;
}
+ for (i = 0; i < QLCNIC_NIU_MAX_XG_PORTS; i++)
+ adapter->eswitch[i].flags |= QLCNIC_SWITCH_ENABLE;
+
+ kfree(pci_info);
+ return 0;
+
+err_eswitch:
kfree(adapter->eswitch);
adapter->eswitch = NULL;
-err_eswitch:
+err_npars:
kfree(adapter->npars);
+ adapter->npars = NULL;
+err_pci_info:
+ kfree(pci_info);
return ret;
}
struct device *dev = container_of(kobj, struct device, kobj);
struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
struct qlcnic_pci_func_cfg pci_cfg[QLCNIC_MAX_PCI_FUNC];
- struct qlcnic_pci_info pci_info[QLCNIC_MAX_PCI_FUNC];
+ struct qlcnic_pci_info *pci_info;
int i, ret;
if (size != sizeof(pci_cfg))
return QL_STATUS_INVALID_PARAM;
+ pci_info = kcalloc(QLCNIC_MAX_PCI_FUNC, sizeof(*pci_info), GFP_KERNEL);
+ if (!pci_info)
+ return -ENOMEM;
+
ret = qlcnic_get_pci_info(adapter, pci_info);
- if (ret)
+ if (ret) {
+ kfree(pci_info);
return ret;
+ }
for (i = 0; i < QLCNIC_MAX_PCI_FUNC ; i++) {
pci_cfg[i].pci_func = pci_info[i].id;
memcpy(&pci_cfg[i].def_mac_addr, &pci_info[i].mac, ETH_ALEN);
}
memcpy(buf, &pci_cfg, size);
+ kfree(pci_info);
return size;
-
}
static struct bin_attribute bin_attr_npar_config = {
.attr = {.name = "npar_config", .mode = (S_IRUGO | S_IWUSR)},
static void qec_init(struct bigmac *bp)
{
- struct of_device *qec_op = bp->qec_op;
+ struct platform_device *qec_op = bp->qec_op;
void __iomem *gregs = bp->gregs;
u8 bsizes = bp->bigmac_bursts;
u32 regval;
.ndo_validate_addr = eth_validate_addr,
};
-static int __devinit bigmac_ether_init(struct of_device *op,
- struct of_device *qec_op)
+static int __devinit bigmac_ether_init(struct platform_device *op,
+ struct platform_device *qec_op)
{
static int version_printed;
struct net_device *dev;
/* QEC can be the parent of either QuadEthernet or a BigMAC. We want
* the latter.
*/
-static int __devinit bigmac_sbus_probe(struct of_device *op,
+static int __devinit bigmac_sbus_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device *parent = op->dev.parent;
- struct of_device *qec_op;
+ struct platform_device *qec_op;
- qec_op = to_of_device(parent);
+ qec_op = to_platform_device(parent);
return bigmac_ether_init(op, qec_op);
}
-static int __devexit bigmac_sbus_remove(struct of_device *op)
+static int __devexit bigmac_sbus_remove(struct platform_device *op)
{
struct bigmac *bp = dev_get_drvdata(&op->dev);
struct device *parent = op->dev.parent;
struct net_device *net_dev = bp->dev;
- struct of_device *qec_op;
+ struct platform_device *qec_op;
- qec_op = to_of_device(parent);
+ qec_op = to_platform_device(parent);
unregister_netdev(net_dev);
unsigned int timer_ticks;
struct net_device_stats enet_stats;
- struct of_device *qec_op;
- struct of_device *bigmac_op;
+ struct platform_device *qec_op;
+ struct platform_device *bigmac_op;
struct net_device *dev;
};
*/
#ifdef CONFIG_SBUS
if ((hp->happy_flags & HFLAG_PCI) == 0) {
- struct of_device *op = hp->happy_dev;
+ struct platform_device *op = hp->happy_dev;
if (sbus_can_dma_64bit()) {
sbus_set_sbus64(&op->dev,
hp->happy_bursts);
#ifdef CONFIG_SBUS
else {
const struct linux_prom_registers *regs;
- struct of_device *op = hp->happy_dev;
+ struct platform_device *op = hp->happy_dev;
regs = of_get_property(op->dev.of_node, "regs", NULL);
if (regs)
sprintf(info->bus_info, "SBUS:%d",
*
* Return NULL on failure.
*/
-static struct quattro * __devinit quattro_sbus_find(struct of_device *child)
+static struct quattro * __devinit quattro_sbus_find(struct platform_device *child)
{
struct device *parent = child->dev.parent;
- struct of_device *op;
+ struct platform_device *op;
struct quattro *qp;
- op = to_of_device(parent);
+ op = to_platform_device(parent);
qp = dev_get_drvdata(&op->dev);
if (qp)
return qp;
struct quattro *qp;
for (qp = qfe_sbus_list; qp != NULL; qp = qp->next) {
- struct of_device *op = qp->quattro_dev;
+ struct platform_device *op = qp->quattro_dev;
int err, qfe_slot, skip = 0;
for (qfe_slot = 0; qfe_slot < 4; qfe_slot++) {
struct quattro *qp;
for (qp = qfe_sbus_list; qp != NULL; qp = qp->next) {
- struct of_device *op = qp->quattro_dev;
+ struct platform_device *op = qp->quattro_dev;
int qfe_slot, skip = 0;
for (qfe_slot = 0; qfe_slot < 4; qfe_slot++) {
};
#ifdef CONFIG_SBUS
-static int __devinit happy_meal_sbus_probe_one(struct of_device *op, int is_qfe)
+static int __devinit happy_meal_sbus_probe_one(struct platform_device *op, int is_qfe)
{
struct device_node *dp = op->dev.of_node, *sbus_dp;
struct quattro *qp = NULL;
int i, qfe_slot = -1;
int err = -ENODEV;
- sbus_dp = to_of_device(op->dev.parent)->dev.of_node;
+ sbus_dp = op->dev.parent->of_node;
/* We can match PCI devices too, do not accept those here. */
if (strcmp(sbus_dp->name, "sbus"))
#endif
#ifdef CONFIG_SBUS
-static int __devinit hme_sbus_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit hme_sbus_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
const char *model = of_get_property(dp, "model", NULL);
return happy_meal_sbus_probe_one(op, is_qfe);
}
-static int __devexit hme_sbus_remove(struct of_device *op)
+static int __devexit hme_sbus_remove(struct platform_device *op)
{
struct happy_meal *hp = dev_get_drvdata(&op->dev);
struct net_device *net_dev = hp->dev;
void (*write_rxd)(struct happy_meal_rxd *, u32, u32);
#endif
- /* This is either an of_device or a pci_dev. */
+ /* This is either an platform_device or a pci_dev. */
void *happy_dev;
struct device *dma_dev;
int rx_new, tx_new;
int rx_old, tx_old;
- struct of_device *ledma; /* If set this points to ledma */
+ struct platform_device *ledma; /* If set this points to ledma */
char tpe; /* cable-selection is TPE */
char auto_select; /* cable-selection by carrier */
char burst_sizes; /* ledma SBus burst sizes */
char *name;
dma_addr_t init_block_dvma;
struct net_device *dev; /* Backpointer */
- struct of_device *op;
- struct of_device *lebuffer;
+ struct platform_device *op;
+ struct platform_device *lebuffer;
struct timer_list multicast_timer;
};
if (lp->lregs)
of_iounmap(&lp->op->resource[0], lp->lregs, LANCE_REG_SIZE);
if (lp->dregs) {
- struct of_device *ledma = lp->ledma;
+ struct platform_device *ledma = lp->ledma;
of_iounmap(&ledma->resource[0], lp->dregs,
resource_size(&ledma->resource[0]));
.ndo_validate_addr = eth_validate_addr,
};
-static int __devinit sparc_lance_probe_one(struct of_device *op,
- struct of_device *ledma,
- struct of_device *lebuffer)
+static int __devinit sparc_lance_probe_one(struct platform_device *op,
+ struct platform_device *ledma,
+ struct platform_device *lebuffer)
{
struct device_node *dp = op->dev.of_node;
static unsigned version_printed;
return -ENODEV;
}
-static int __devinit sunlance_sbus_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit sunlance_sbus_probe(struct platform_device *op, const struct of_device_id *match)
{
- struct of_device *parent = to_of_device(op->dev.parent);
+ struct platform_device *parent = to_platform_device(op->dev.parent);
struct device_node *parent_dp = parent->dev.of_node;
int err;
return err;
}
-static int __devexit sunlance_sbus_remove(struct of_device *op)
+static int __devexit sunlance_sbus_remove(struct platform_device *op)
{
struct lance_private *lp = dev_get_drvdata(&op->dev);
struct net_device *net_dev = lp->dev;
{
const struct linux_prom_registers *regs;
struct sunqe *qep = netdev_priv(dev);
- struct of_device *op;
+ struct platform_device *op;
strcpy(info->driver, "sunqe");
strcpy(info->version, "3.0");
};
/* This is only called once at boot time for each card probed. */
-static void qec_init_once(struct sunqec *qecp, struct of_device *op)
+static void qec_init_once(struct sunqec *qecp, struct platform_device *op)
{
u8 bsizes = qecp->qec_bursts;
return bsizes;
}
-static struct sunqec * __devinit get_qec(struct of_device *child)
+static struct sunqec * __devinit get_qec(struct platform_device *child)
{
- struct of_device *op = to_of_device(child->dev.parent);
+ struct platform_device *op = to_platform_device(child->dev.parent);
struct sunqec *qecp;
qecp = dev_get_drvdata(&op->dev);
.ndo_validate_addr = eth_validate_addr,
};
-static int __devinit qec_ether_init(struct of_device *op)
+static int __devinit qec_ether_init(struct platform_device *op)
{
static unsigned version_printed;
struct net_device *dev;
return res;
}
-static int __devinit qec_sbus_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit qec_sbus_probe(struct platform_device *op, const struct of_device_id *match)
{
return qec_ether_init(op);
}
-static int __devexit qec_sbus_remove(struct of_device *op)
+static int __devexit qec_sbus_remove(struct platform_device *op)
{
struct sunqe *qp = dev_get_drvdata(&op->dev);
struct net_device *net_dev = qp->dev;
while (root_qec_dev) {
struct sunqec *next = root_qec_dev->next_module;
- struct of_device *op = root_qec_dev->op;
+ struct platform_device *op = root_qec_dev->op;
free_irq(op->archdata.irqs[0], (void *) root_qec_dev);
of_iounmap(&op->resource[0], root_qec_dev->gregs,
void __iomem *gregs; /* QEC Global Registers */
struct sunqe *qes[4]; /* Each child MACE */
unsigned int qec_bursts; /* Support burst sizes */
- struct of_device *op; /* QEC's OF device */
+ struct platform_device *op; /* QEC's OF device */
struct sunqec *next_module; /* List of all QECs in system */
};
__u32 buffers_dvma; /* DVMA visible address. */
struct sunqec *parent;
u8 mconfig; /* Base MACE mconfig value */
- struct of_device *op; /* QE's OF device struct */
+ struct platform_device *op; /* QE's OF device struct */
struct net_device *dev; /* QE's netdevice struct */
int channel; /* Who am I? */
};
#ifdef CONFIG_PM
-static int ucc_geth_suspend(struct of_device *ofdev, pm_message_t state)
+static int ucc_geth_suspend(struct platform_device *ofdev, pm_message_t state)
{
struct net_device *ndev = dev_get_drvdata(&ofdev->dev);
struct ucc_geth_private *ugeth = netdev_priv(ndev);
return 0;
}
-static int ucc_geth_resume(struct of_device *ofdev)
+static int ucc_geth_resume(struct platform_device *ofdev)
{
struct net_device *ndev = dev_get_drvdata(&ofdev->dev);
struct ucc_geth_private *ugeth = netdev_priv(ndev);
#endif
};
-static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *match)
+static int ucc_geth_probe(struct platform_device* ofdev, const struct of_device_id *match)
{
struct device *device = &ofdev->dev;
struct device_node *np = ofdev->dev.of_node;
return 0;
}
-static int ucc_geth_remove(struct of_device* ofdev)
+static int ucc_geth_remove(struct platform_device* ofdev)
{
struct device *device = &ofdev->dev;
struct net_device *dev = dev_get_drvdata(device);
static void rx_complete (struct urb *urb);
-static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
+static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
{
struct sk_buff *skb;
struct skb_data *entry;
netif_dbg(dev, rx_err, dev->net, "no rx skb\n");
usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
usb_free_urb (urb);
- return;
+ return -ENOMEM;
}
skb_reserve (skb, NET_IP_ALIGN);
netif_dbg(dev, ifdown, dev->net, "device gone\n");
netif_device_detach (dev->net);
break;
+ case -EHOSTUNREACH:
+ retval = -ENOLINK;
+ break;
default:
netif_dbg(dev, rx_err, dev->net,
"rx submit, %d\n", retval);
dev_kfree_skb_any (skb);
usb_free_urb (urb);
}
+ return retval;
}
/* tasklet could resubmit itself forever if memory is tight */
if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
struct urb *urb = NULL;
+ int resched = 1;
if (netif_running (dev->net))
urb = usb_alloc_urb (0, GFP_KERNEL);
status = usb_autopm_get_interface(dev->intf);
if (status < 0)
goto fail_lowmem;
- rx_submit (dev, urb, GFP_KERNEL);
+ if (rx_submit (dev, urb, GFP_KERNEL) == -ENOLINK)
+ resched = 0;
usb_autopm_put_interface(dev->intf);
fail_lowmem:
- tasklet_schedule (&dev->bh);
+ if (resched)
+ tasklet_schedule (&dev->bh);
}
}
// don't refill the queue all at once
for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) {
urb = usb_alloc_urb (0, GFP_ATOMIC);
- if (urb != NULL)
- rx_submit (dev, urb, GFP_ATOMIC);
+ if (urb != NULL) {
+ if (rx_submit (dev, urb, GFP_ATOMIC) ==
+ -ENOLINK)
+ return;
+ }
}
if (temp != dev->rxq.qlen)
netif_dbg(dev, link, dev->net,
* Receive a frame through the DMA
*/
static inline void
-fst_rx_dma(struct fst_card_info *card, unsigned char *skb,
- unsigned char *mem, int len)
+fst_rx_dma(struct fst_card_info *card, dma_addr_t skb,
+ dma_addr_t mem, int len)
{
/*
* This routine will setup the DMA and start it
*/
- dbg(DBG_RX, "In fst_rx_dma %p %p %d\n", skb, mem, len);
+ dbg(DBG_RX, "In fst_rx_dma %lx %lx %d\n",
+ (unsigned long) skb, (unsigned long) mem, len);
if (card->dmarx_in_progress) {
dbg(DBG_ASS, "In fst_rx_dma while dma in progress\n");
}
- outl((unsigned long) skb, card->pci_conf + DMAPADR0); /* Copy to here */
- outl((unsigned long) mem, card->pci_conf + DMALADR0); /* from here */
+ outl(skb, card->pci_conf + DMAPADR0); /* Copy to here */
+ outl(mem, card->pci_conf + DMALADR0); /* from here */
outl(len, card->pci_conf + DMASIZ0); /* for this length */
outl(0x00000000c, card->pci_conf + DMADPR0); /* In this direction */
card->dma_port_rx = port;
card->dma_len_rx = len;
card->dma_rxpos = rxp;
- fst_rx_dma(card, (char *) card->rx_dma_handle_card,
- (char *) BUF_OFFSET(rxBuffer[pi][rxp][0]), len);
+ fst_rx_dma(card, card->rx_dma_handle_card,
+ BUF_OFFSET(rxBuffer[pi][rxp][0]), len);
}
if (rxp != port->rxpos) {
dbg(DBG_ASS, "About to increment rxpos by more than 1\n");
msg.cmd = PORT_CONFIG_WRITE;
msg.hss_port = port->id;
msg.index = HSS_CONFIG_TX_PCR;
- msg.data32 = PCR_FRM_SYNC_OUTPUT_RISING | PCR_MSB_ENDIAN |
+ msg.data32 = PCR_FRM_PULSE_DISABLED | PCR_MSB_ENDIAN |
PCR_TX_DATA_ENABLE | PCR_SOF_NO_FBIT;
if (port->clock_type == CLOCK_INT)
msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT;
#include <linux/netdevice.h>
#include <linux/cache.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/ethtool.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
int ret;
u8 csz;
+ /*
+ * L0s needs to be disabled on all ath5k cards.
+ *
+ * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
+ * by default in the future in 2.6.36) this will also mean both L1 and
+ * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
+ * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
+ * though but cannot currently undue the effect of a blacklist, for
+ * details you can read pcie_aspm_sanity_check() and see how it adjusts
+ * the device link capability.
+ *
+ * It may be possible in the future to implement some PCI API to allow
+ * drivers to override blacklists for pre 1.1 PCIe but for now it is
+ * best to accept that both L0s and L1 will be disabled completely for
+ * distributions shipping with CONFIG_PCIEASPM rather than having this
+ * issue present. Motivation for adding this new API will be to help
+ * with power consumption for some of these devices.
+ */
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
+
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "can't enable device\n");
#define AR9287_EEP_NO_BACK_VER AR9287_EEP_MINOR_VER_1
#define AR9287_EEP_START_LOC 128
+#define AR9287_HTC_EEP_START_LOC 256
#define AR9287_NUM_2G_CAL_PIERS 3
#define AR9287_NUM_2G_CCK_TARGET_POWERS 3
#define AR9287_NUM_2G_20_TARGET_POWERS 3
struct ar9287_eeprom *eep = &ah->eeprom.map9287;
struct ath_common *common = ath9k_hw_common(ah);
u16 *eep_data;
- int addr, eep_start_loc = AR9287_EEP_START_LOC;
+ int addr, eep_start_loc;
eep_data = (u16 *)eep;
+ if (ah->hw_version.devid == 0x7015)
+ eep_start_loc = AR9287_HTC_EEP_START_LOC;
+ else
+ eep_start_loc = AR9287_EEP_START_LOC;
+
if (!ath9k_hw_use_flash(ah)) {
ath_print(common, ATH_DBG_EEPROM,
"Reading from EEPROM, not flash\n");
}
kfree(buf);
- if (hif_dev->device_id == 0x7010)
+ if ((hif_dev->device_id == 0x7010) || (hif_dev->device_id == 0x7015))
firm_offset = AR7010_FIRMWARE_TEXT;
else
firm_offset = AR9271_FIRMWARE_TEXT;
switch(hif_dev->device_id) {
case 0x7010:
+ case 0x7015:
case 0x9018:
if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x0202)
hif_dev->fw_name = FIRMWARE_AR7010_1_1;
break;
}
- if (!hif_dev->fw_name) {
- dev_err(&udev->dev, "Can't determine firmware !\n");
- goto err_htc_hw_alloc;
- }
-
ret = ath9k_hif_usb_dev_init(hif_dev);
if (ret) {
ret = -EINVAL;
switch(devid) {
case 0x7010:
+ case 0x7015:
case 0x9018:
priv->htc->credits = 45;
break;
caps = WLAN_RC_HT_FLAG;
if (sta->ht_cap.mcs.rx_mask[1])
caps |= WLAN_RC_DS_FLAG;
- if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
+ if ((sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
+ (conf_is_ht40(&priv->hw->conf)))
caps |= WLAN_RC_40_FLAG;
if (conf_is_ht40(&priv->hw->conf) &&
(sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40))
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_sta *sta = tx_info->control.sta;
struct ath9k_htc_sta *ista;
- struct ath9k_htc_vif *avp;
struct ath9k_htc_tx_ctl tx_ctl;
enum htc_endpoint_id epid;
u16 qnum;
__le16 fc;
u8 *tx_fhdr;
- u8 sta_idx;
+ u8 sta_idx, vif_idx;
hdr = (struct ieee80211_hdr *) skb->data;
fc = hdr->frame_control;
- avp = (struct ath9k_htc_vif *) tx_info->control.vif->drv_priv;
+ if (tx_info->control.vif &&
+ (struct ath9k_htc_vif *) tx_info->control.vif->drv_priv)
+ vif_idx = ((struct ath9k_htc_vif *)
+ tx_info->control.vif->drv_priv)->index;
+ else
+ vif_idx = priv->nvifs;
+
if (sta) {
ista = (struct ath9k_htc_sta *) sta->drv_priv;
sta_idx = ista->index;
memset(&tx_hdr, 0, sizeof(struct tx_frame_hdr));
tx_hdr.node_idx = sta_idx;
- tx_hdr.vif_idx = avp->index;
+ tx_hdr.vif_idx = vif_idx;
if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
tx_ctl.type = ATH9K_HTC_AMPDU;
tx_ctl.type = ATH9K_HTC_NORMAL;
mgmt_hdr.node_idx = sta_idx;
- mgmt_hdr.vif_idx = avp->index;
+ mgmt_hdr.vif_idx = vif_idx;
mgmt_hdr.tidno = 0;
mgmt_hdr.flags = 0;
#define AR_DEVID_7010(_ah) \
(((_ah)->hw_version.devid == 0x7010) || \
+ ((_ah)->hw_version.devid == 0x7015) || \
((_ah)->hw_version.devid == 0x9018))
#define AR_RADIO_SREV_MAJOR 0xf0
printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
+ pm_qos_add_request(&ipw2100_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+ PM_QOS_DEFAULT_VALUE);
+
ret = pci_register_driver(&ipw2100_pci_driver);
if (ret)
goto out;
- pm_qos_add_request(&ipw2100_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
- PM_QOS_DEFAULT_VALUE);
#ifdef CONFIG_IPW2100_DEBUG
ipw2100_debug_level = debug;
ret = driver_create_file(&ipw2100_pci_driver.driver,
.shadow_ram_support = false,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF,
rts_retry_limit = data_retry_limit;
tx_cmd->rts_retry_limit = rts_retry_limit;
- if (ieee80211_is_mgmt(fc)) {
- switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
- case cpu_to_le16(IEEE80211_STYPE_AUTH):
- case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
- case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
- case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
- if (tx_flags & TX_CMD_FLG_RTS_MSK) {
- tx_flags &= ~TX_CMD_FLG_RTS_MSK;
- tx_flags |= TX_CMD_FLG_CTS_MSK;
- }
- break;
- default:
- break;
- }
- }
-
tx_cmd->rate = rate;
tx_cmd->tx_flags = tx_flags;
static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
.get_hcmd_size = iwl3945_get_hcmd_size,
.build_addsta_hcmd = iwl3945_build_addsta_hcmd,
- .rts_tx_cmd_flag = iwlcore_rts_tx_cmd_flag,
+ .tx_cmd_protection = iwlcore_tx_cmd_protection,
.request_scan = iwl3945_request_scan,
};
.build_addsta_hcmd = iwl4965_build_addsta_hcmd,
.chain_noise_reset = iwl4965_chain_noise_reset,
.gain_computation = iwl4965_gain_computation,
- .rts_tx_cmd_flag = iwlcore_rts_tx_cmd_flag,
+ .tx_cmd_protection = iwlcore_tx_cmd_protection,
.calc_rssi = iwl4965_calc_rssi,
.request_scan = iwlagn_request_scan,
};
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
}
}
-static void iwlagn_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
- __le32 *tx_flags)
+static void iwlagn_tx_cmd_protection(struct iwl_priv *priv,
+ struct ieee80211_tx_info *info,
+ __le16 fc, __le32 *tx_flags)
{
- *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS ||
+ info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
+ return;
+ }
+
+ if (priv->cfg->use_rts_for_aggregation &&
+ info->flags & IEEE80211_TX_CTL_AMPDU) {
+ *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
+ return;
+ }
}
/* Calc max signal level (dBm) among 3 possible receivers */
.build_addsta_hcmd = iwlagn_build_addsta_hcmd,
.gain_computation = iwlagn_gain_computation,
.chain_noise_reset = iwlagn_chain_noise_reset,
- .rts_tx_cmd_flag = iwlagn_rts_tx_cmd_flag,
+ .tx_cmd_protection = iwlagn_tx_cmd_protection,
.calc_rssi = iwlagn_calc_rssi,
.request_scan = iwlagn_request_scan,
};
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
}
- priv->cfg->ops->utils->rts_tx_cmd_flag(info, &tx_flags);
-
- if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK))
- tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
+ priv->cfg->ops->utils->tx_cmd_protection(priv, info, fc, &tx_flags);
tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
if (ieee80211_is_mgmt(fc)) {
if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE))
rate_flags |= RATE_MCS_CCK_MSK;
- /* Set up RTS and CTS flags for certain packets */
- switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
- case cpu_to_le16(IEEE80211_STYPE_AUTH):
- case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
- case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
- case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
- if (tx_cmd->tx_flags & TX_CMD_FLG_RTS_MSK) {
- tx_cmd->tx_flags &= ~TX_CMD_FLG_RTS_MSK;
- tx_cmd->tx_flags |= TX_CMD_FLG_CTS_MSK;
- }
- break;
- default:
- break;
- }
-
/* Set up antennas */
priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
priv->hw_params.valid_tx_ant);
priv->start_calib = 0;
if (new_assoc) {
- /*
- * allow CTS-to-self if possible for new association.
- * this is relevant only for 5000 series and up,
- * but will not damage 4965
- */
- priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
-
/* Apply the new configuration
* RXON assoc doesn't clear the station table in uCode,
*/
static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
-static ssize_t show_rts_ht_protection(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- return sprintf(buf, "%s\n",
- priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
-}
-
-static ssize_t store_rts_ht_protection(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 10, &val);
- if (ret)
- IWL_INFO(priv, "Input is not in decimal form.\n");
- else {
- if (!iwl_is_associated(priv))
- priv->cfg->use_rts_for_ht = val ? true : false;
- else
- IWL_ERR(priv, "Sta associated with AP - "
- "Change protection mechanism is not allowed\n");
- ret = count;
- }
- return ret;
-}
-
-static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
- show_rts_ht_protection, store_rts_ht_protection);
-
-
static struct attribute *iwl_sysfs_entries[] = {
&dev_attr_temperature.attr,
&dev_attr_tx_power.attr,
- &dev_attr_rts_ht_protection.attr,
#ifdef CONFIG_IWLWIFI_DEBUG
&dev_attr_debug_level.attr,
#endif
return ret;
}
-/*
- * switch to RTS/CTS for TX
- */
-static void iwl_enable_rts_cts(struct iwl_priv *priv)
-{
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- priv->staging_rxon.flags &= ~RXON_FLG_SELF_CTS_EN;
- if (!test_bit(STATUS_SCANNING, &priv->status)) {
- IWL_DEBUG_INFO(priv, "use RTS/CTS protection\n");
- iwlcore_commit_rxon(priv);
- } else {
- /* scanning, defer the request until scan completed */
- IWL_DEBUG_INFO(priv, "defer setting RTS/CTS protection\n");
- }
-}
-
static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
}
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
ret = 0;
+ if (priv->cfg->use_rts_for_aggregation) {
+ struct iwl_station_priv *sta_priv =
+ (void *) sta->drv_priv;
+ /*
+ * switch off RTS/CTS if it was previously enabled
+ */
+
+ sta_priv->lq_sta.lq.general_params.flags &=
+ ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
+ iwl_send_lq_cmd(priv, &sta_priv->lq_sta.lq,
+ CMD_ASYNC, false);
+ }
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
- if (priv->cfg->use_rts_for_ht) {
+ if (priv->cfg->use_rts_for_aggregation) {
+ struct iwl_station_priv *sta_priv =
+ (void *) sta->drv_priv;
+
/*
* switch to RTS/CTS if it is the prefer protection
* method for HT traffic
*/
- iwl_enable_rts_cts(priv);
+
+ sta_priv->lq_sta.lq.general_params.flags |=
+ LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
+ iwl_send_lq_cmd(priv, &sta_priv->lq_sta.lq,
+ CMD_ASYNC, false);
}
ret = 0;
break;
EXPORT_SYMBOL(iwlcore_free_geos);
/*
- * iwlcore_rts_tx_cmd_flag: Set rts/cts. 3945 and 4965 only share this
+ * iwlcore_tx_cmd_protection: Set rts/cts. 3945 and 4965 only share this
* function.
*/
-void iwlcore_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
- __le32 *tx_flags)
+void iwlcore_tx_cmd_protection(struct iwl_priv *priv,
+ struct ieee80211_tx_info *info,
+ __le16 fc, __le32 *tx_flags)
{
if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
*tx_flags |= TX_CMD_FLG_RTS_MSK;
*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
+ *tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
+
+ if (!ieee80211_is_mgmt(fc))
+ return;
+
+ switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
+ case cpu_to_le16(IEEE80211_STYPE_AUTH):
+ case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
+ case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
+ case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
+ *tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+ *tx_flags |= TX_CMD_FLG_CTS_MSK;
+ break;
+ }
} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
*tx_flags |= TX_CMD_FLG_CTS_MSK;
+ *tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
}
}
-EXPORT_SYMBOL(iwlcore_rts_tx_cmd_flag);
+EXPORT_SYMBOL(iwlcore_tx_cmd_protection);
+
static bool is_single_rx_stream(struct iwl_priv *priv)
{
priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
else
priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+ if (bss_conf->use_cts_prot)
+ priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
+ else
+ priv->staging_rxon.flags &= ~RXON_FLG_SELF_CTS_EN;
}
if (changes & BSS_CHANGED_BASIC_RATES) {
u32 min_average_noise,
u8 default_chain);
void (*chain_noise_reset)(struct iwl_priv *priv);
- void (*rts_tx_cmd_flag)(struct ieee80211_tx_info *info,
- __le32 *tx_flags);
+ void (*tx_cmd_protection)(struct iwl_priv *priv,
+ struct ieee80211_tx_info *info,
+ __le16 fc, __le32 *tx_flags);
int (*calc_rssi)(struct iwl_priv *priv,
struct iwl_rx_phy_res *rx_resp);
void (*request_scan)(struct iwl_priv *priv, struct ieee80211_vif *vif);
* @led_compensation: compensate on the led on/off time per HW according
* to the deviation to achieve the desired led frequency.
* The detail algorithm is described in iwl-led.c
- * @use_rts_for_ht: use rts/cts protection for HT traffic
+ * @use_rts_for_aggregation: use rts/cts protection for HT traffic
* @chain_noise_num_beacons: number of beacons used to compute chain noise
* @adv_thermal_throttle: support advance thermal throttle
* @support_ct_kill_exit: support ct kill exit condition
const bool ht_greenfield_support;
u16 led_compensation;
const bool broken_powersave;
- bool use_rts_for_ht;
+ bool use_rts_for_aggregation;
int chain_noise_num_beacons;
const bool supports_idle;
bool adv_thermal_throttle;
void iwl_mac_reset_tsf(struct ieee80211_hw *hw);
int iwl_alloc_txq_mem(struct iwl_priv *priv);
void iwl_free_txq_mem(struct iwl_priv *priv);
-void iwlcore_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
- __le32 *tx_flags);
+void iwlcore_tx_cmd_protection(struct iwl_priv *priv,
+ struct ieee80211_tx_info *info,
+ __le16 fc, __le32 *tx_flags);
#ifdef CONFIG_IWLWIFI_DEBUGFS
int iwl_alloc_traffic_mem(struct iwl_priv *priv);
void iwl_free_traffic_mem(struct iwl_priv *priv);
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
}
- priv->cfg->ops->utils->rts_tx_cmd_flag(info, &tx_flags);
-
- if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK))
- tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
+ priv->cfg->ops->utils->tx_cmd_protection(priv, info, fc, &tx_flags);
tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
if (ieee80211_is_mgmt(fc)) {
*
*/
+#include <linux/sched.h>
+#include <linux/wait.h>
#include <linux/slab.h>
+#include <linux/sched.h>
#include <linux/ieee80211.h>
#include <net/cfg80211.h>
#include <asm/unaligned.h>
const char *helper;
const char *firmware;
+ bool helper_allocated;
+ bool firmware_allocated;
u8 buffer[65536];
card->helper = if_sdio_models[i].helper;
card->firmware = if_sdio_models[i].firmware;
+ kparam_block_sysfs_write(helper_name);
if (lbs_helper_name) {
+ char *helper = kstrdup(lbs_helper_name, GFP_KERNEL);
+ if (!helper) {
+ kparam_unblock_sysfs_write(helper_name);
+ ret = -ENOMEM;
+ goto free;
+ }
lbs_deb_sdio("overriding helper firmware: %s\n",
lbs_helper_name);
- card->helper = lbs_helper_name;
+ card->helper = helper;
+ card->helper_allocated = true;
}
+ kparam_unblock_sysfs_write(helper_name);
+ kparam_block_sysfs_write(fw_name);
if (lbs_fw_name) {
+ char *fw_name = kstrdup(lbs_fw_name, GFP_KERNEL);
+ if (!fw_name) {
+ kparam_unblock_sysfs_write(fw_name);
+ ret = -ENOMEM;
+ goto free;
+ }
lbs_deb_sdio("overriding firmware: %s\n", lbs_fw_name);
- card->firmware = lbs_fw_name;
+ card->firmware = fw_name;
+ card->firmware_allocated = true;
}
+ kparam_unblock_sysfs_write(fw_name);
sdio_claim_host(func);
kfree(packet);
}
+ if (card->helper_allocated)
+ kfree(card->helper);
+ if (card->firmware_allocated)
+ kfree(card->firmware);
kfree(card);
goto out;
kfree(packet);
}
+ if (card->helper_allocated)
+ kfree(card->helper);
+ if (card->firmware_allocated)
+ kfree(card->firmware);
kfree(card);
lbs_deb_leave(LBS_DEB_SDIO);
}
/* Upload firmware */
+ kparam_block_sysfs_write(fw_name);
if (__if_usb_prog_firmware(cardp, lbs_fw_name, BOOT_CMD_FW_BY_USB)) {
+ kparam_unblock_sysfs_write(fw_name);
lbs_deb_usbd(&udev->dev, "FW upload failed\n");
goto err_prog_firmware;
}
+ kparam_unblock_sysfs_write(fw_name);
if (!(priv = lbs_add_card(cardp, &udev->dev)))
goto err_prog_firmware;
lbtf_deb_enter(LBTF_DEB_USB);
+ kparam_block_sysfs_write(fw_name);
ret = request_firmware(&cardp->fw, lbtf_fw_name, &cardp->udev->dev);
if (ret < 0) {
pr_err("request_firmware() failed with %#x\n", ret);
pr_err("firmware %s not found\n", lbtf_fw_name);
+ kparam_unblock_sysfs_write(fw_name);
goto done;
}
+ kparam_unblock_sysfs_write(fw_name);
if (check_fwfile_format(cardp->fw->data, cardp->fw->size))
goto release_fw;
{ PCI_DEVICE(0x1260, 0x3886) },
/* Intersil PRISM Xbow Wireless LAN adapter (Symbol AP-300) */
{ PCI_DEVICE(0x1260, 0xffff) },
- /* Standard Microsystems Corp SMC2802W Wireless PCI */
- { PCI_DEVICE(0x10b8, 0x2802) },
{ },
};
cmd->timeout = timeout;
- ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
+ ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, cmd, sizeof(*cmd));
if (ret < 0) {
wl1251_error("cmd trigger scan to failed: %d", ret);
goto out;
*
* Return: Value of the parameter if the parameter is found, or 0 otherwise
*/
-static bool get_bool(struct of_device *ofdev, const char *s)
+static bool get_bool(struct platform_device *ofdev, const char *s)
{
u32 *p = (u32 *)of_get_property(ofdev->dev.of_node, s, NULL);
* Return: 0, if the driver is bound to the Emaclite device, or
* a negative error if there is failure.
*/
-static int __devinit xemaclite_of_probe(struct of_device *ofdev,
+static int __devinit xemaclite_of_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct resource r_irq; /* Interrupt resources */
*
* Return: 0, always.
*/
-static int __devexit xemaclite_of_remove(struct of_device *of_dev)
+static int __devexit xemaclite_of_remove(struct platform_device *of_dev)
{
struct device *dev = &of_dev->dev;
struct net_device *ndev = dev_get_drvdata(dev);
* @ids: array of of device match structures to search in
* @dev: the of device structure to match against
*
- * Used by a driver to check whether an of_device present in the
+ * Used by a driver to check whether an platform_device present in the
* system is in its list of supported devices.
*/
const struct of_device_id *of_match_device(const struct of_device_id *matches,
dev_dbg(&dev->dev,
"PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
io_lo, io_hi, irq);
- irq = PARPORT_IRQ_NONE;
}
port = parport_pc_probe_port (io_lo, io_hi, irq,
PARPORT_DMA_NONE, &dev->dev, IRQF_SHARED);
.owner = THIS_MODULE,
};
-static int __devinit bpp_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit bpp_probe(struct platform_device *op, const struct of_device_id *match)
{
struct parport_operations *ops;
struct bpp_regs __iomem *regs;
return err;
}
-static int __devexit bpp_remove(struct of_device *op)
+static int __devexit bpp_remove(struct platform_device *op)
{
struct parport *p = dev_get_drvdata(&op->dev);
struct parport_operations *ops = p->ops;
return pte->val & VTD_PAGE_MASK;
#else
/* Must have a full atomic 64-bit read */
- return __cmpxchg64(pte, 0ULL, 0ULL) & VTD_PAGE_MASK;
+ return __cmpxchg64(&pte->val, 0ULL, 0ULL) & VTD_PAGE_MASK;
#endif
}
int intr_remapping_enabled;
static int disable_intremap;
+static int disable_sourceid_checking;
+
static __init int setup_nointremap(char *str)
{
disable_intremap = 1;
}
early_param("nointremap", setup_nointremap);
+static __init int setup_intremap(char *str)
+{
+ if (!str)
+ return -EINVAL;
+
+ if (!strncmp(str, "on", 2))
+ disable_intremap = 0;
+ else if (!strncmp(str, "off", 3))
+ disable_intremap = 1;
+ else if (!strncmp(str, "nosid", 5))
+ disable_sourceid_checking = 1;
+
+ return 0;
+}
+early_param("intremap", setup_intremap);
+
struct irq_2_iommu {
struct intel_iommu *iommu;
u16 irte_index;
static void set_irte_sid(struct irte *irte, unsigned int svt,
unsigned int sq, unsigned int sid)
{
+ if (disable_sourceid_checking)
+ svt = SVT_NO_VERIFY;
irte->svt = svt;
irte->sq = sq;
irte->sid = sid;
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
|| ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
- || MACH_VPAC270)
+ || MACH_VPAC270 || MACH_BALLOON3)
select PCMCIA_SOC_COMMON
help
Say Y here to include support for the PXA2xx PCMCIA controller
pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o
pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o
+pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
unsigned present:1;
unsigned active:1;
- struct of_device *ofdev;
+ struct platform_device *ofdev;
unsigned long mem_phys;
void __iomem * mem_base;
unsigned long mem_size;
.set_mem_map = electra_cf_set_mem_map,
};
-static int __devinit electra_cf_probe(struct of_device *ofdev,
+static int __devinit electra_cf_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device *device = &ofdev->dev;
}
-static int __devexit electra_cf_remove(struct of_device *ofdev)
+static int __devexit electra_cf_remove(struct platform_device *ofdev)
{
struct device *device = &ofdev->dev;
struct electra_cf_socket *cf;
.set_mem_map = m8xx_set_mem_map,
};
-static int __init m8xx_probe(struct of_device *ofdev,
+static int __init m8xx_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct pcmcia_win *w;
return 0;
}
-static int m8xx_remove(struct of_device *ofdev)
+static int m8xx_remove(struct platform_device *ofdev)
{
u32 m, i;
struct pcmcia_win *w;
--- /dev/null
+/*
+ * linux/drivers/pcmcia/pxa2xx_balloon3.c
+ *
+ * Balloon3 PCMCIA specific routines.
+ *
+ * Author: Nick Bane
+ * Created: June, 2006
+ * Copyright: Toby Churchill Ltd
+ * Derived from pxa2xx_mainstone.c, by Nico Pitre
+ *
+ * Various modification by Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/balloon3.h>
+
+#include "soc_common.h"
+
+/*
+ * These are a list of interrupt sources that provokes a polled
+ * check of status
+ */
+static struct pcmcia_irqs irqs[] = {
+ { 0, BALLOON3_S0_CD_IRQ, "PCMCIA0 CD" },
+ { 0, BALLOON3_BP_NSTSCHG_IRQ, "PCMCIA0 STSCHG" },
+};
+
+static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ uint16_t ver;
+ int ret;
+ static void __iomem *fpga_ver;
+
+ ver = __raw_readw(BALLOON3_FPGA_VER);
+ if (ver > 0x0201)
+ pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+ "PCMCIA/CF support might be broken in this version!",
+ ver);
+
+ skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ;
+ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void balloon3_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static unsigned long balloon3_pcmcia_status[2] = {
+ BALLOON3_CF_nSTSCHG_BVD1,
+ BALLOON3_CF_nSTSCHG_BVD1
+};
+
+static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ uint16_t status;
+ int flip;
+
+ /* This actually reads the STATUS register */
+ status = __raw_readw(BALLOON3_CF_STATUS_REG);
+ flip = (status ^ balloon3_pcmcia_status[skt->nr])
+ & BALLOON3_CF_nSTSCHG_BVD1;
+ /*
+ * Workaround for STSCHG which can't be deasserted:
+ * We therefore disable/enable corresponding IRQs
+ * as needed to avoid IRQ locks.
+ */
+ if (flip) {
+ balloon3_pcmcia_status[skt->nr] = status;
+ if (status & BALLOON3_CF_nSTSCHG_BVD1)
+ enable_irq(BALLOON3_BP_NSTSCHG_IRQ);
+ else
+ disable_irq(BALLOON3_BP_NSTSCHG_IRQ);
+ }
+
+ state->detect = !gpio_get_value(BALLOON3_GPIO_S0_CD);
+ state->ready = !!(status & BALLOON3_CF_nIRQ);
+ state->bvd1 = !!(status & BALLOON3_CF_nSTSCHG_BVD1);
+ state->bvd2 = 0; /* not available */
+ state->vs_3v = 1; /* Always true its a CF card */
+ state->vs_Xv = 0; /* not available */
+ state->wrprot = 0; /* not available */
+}
+
+static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ __raw_writew((state->flags & SS_RESET) ? BALLOON3_CF_RESET : 0,
+ BALLOON3_CF_CONTROL_REG);
+ return 0;
+}
+
+static void balloon3_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void balloon3_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level balloon3_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .hw_init = balloon3_pcmcia_hw_init,
+ .hw_shutdown = balloon3_pcmcia_hw_shutdown,
+ .socket_state = balloon3_pcmcia_socket_state,
+ .configure_socket = balloon3_pcmcia_configure_socket,
+ .socket_init = balloon3_pcmcia_socket_init,
+ .socket_suspend = balloon3_pcmcia_socket_suspend,
+ .first = 0,
+ .nr = 1,
+};
+
+static struct platform_device *balloon3_pcmcia_device;
+
+static int __init balloon3_pcmcia_init(void)
+{
+ int ret;
+
+ balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!balloon3_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(balloon3_pcmcia_device,
+ &balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops));
+
+ if (!ret)
+ ret = platform_device_add(balloon3_pcmcia_device);
+
+ if (ret)
+ platform_device_put(balloon3_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit balloon3_pcmcia_exit(void)
+{
+ platform_device_unregister(balloon3_pcmcia_device);
+}
+
+module_init(balloon3_pcmcia_init);
+module_exit(balloon3_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nick Bane <nick@cecomputing.co.uk>");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver");
---help---
Build the sonypi driver compatibility code into the sony-laptop driver.
+config IDEAPAD_ACPI
+ tristate "Lenovo IdeaPad ACPI Laptop Extras"
+ depends on ACPI
+ depends on RFKILL
+ help
+ This is a driver for the rfkill switches on Lenovo IdeaPad netbooks.
+
config THINKPAD_ACPI
tristate "ThinkPad ACPI Laptop Extras"
depends on ACPI
obj-$(CONFIG_HP_WMI) += hp-wmi.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
+obj-$(CONFIG_IDEAPAD_ACPI) += ideapad_acpi.o
obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
obj-$(CONFIG_FUJITSU_LAPTOP) += fujitsu-laptop.o
obj-$(CONFIG_PANASONIC_LAPTOP) += panasonic-laptop.o
/* SPLV laptop */
if (hotk->methods->brightness_set) {
if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set,
- value, NULL))
+ value, NULL)) {
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
ret = -EIO;
+ }
goto out;
}
hotk->methods->brightness_down,
NULL, NULL);
(value > 0) ? value-- : value++;
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(status)) {
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
ret = -EIO;
+ }
}
out:
return ret;
},
.callback = dmi_check_cb
},
+ {
+ .ident = "Dell Mini 1012",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
+ },
+ .callback = dmi_check_cb
+ },
{
.ident = "Dell Inspiron 11z",
.matches = {
MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron910:*");
MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1010:*");
MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1011:*");
+MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1012:*");
MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1110:*");
MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1210:*");
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"),
},
},
+ {
+ .ident = "Dell Mini 1012",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
+ },
+ },
{
.ident = "Dell Inspiron 11z",
.matches = {
--- /dev/null
+/*
+ * ideapad_acpi.c - Lenovo IdeaPad ACPI Extras
+ *
+ * Copyright © 2010 Intel Corporation
+ * Copyright © 2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/rfkill.h>
+
+#define IDEAPAD_DEV_CAMERA 0
+#define IDEAPAD_DEV_WLAN 1
+#define IDEAPAD_DEV_BLUETOOTH 2
+#define IDEAPAD_DEV_3G 3
+#define IDEAPAD_DEV_KILLSW 4
+
+struct ideapad_private {
+ struct rfkill *rfk[5];
+};
+
+static struct {
+ char *name;
+ int type;
+} ideapad_rfk_data[] = {
+ /* camera has no rfkill */
+ { "ideapad_wlan", RFKILL_TYPE_WLAN },
+ { "ideapad_bluetooth", RFKILL_TYPE_BLUETOOTH },
+ { "ideapad_3g", RFKILL_TYPE_WWAN },
+ { "ideapad_killsw", RFKILL_TYPE_WLAN }
+};
+
+static int ideapad_dev_exists(int device)
+{
+ acpi_status status;
+ union acpi_object in_param;
+ struct acpi_object_list input = { 1, &in_param };
+ struct acpi_buffer output;
+ union acpi_object out_obj;
+
+ output.length = sizeof(out_obj);
+ output.pointer = &out_obj;
+
+ in_param.type = ACPI_TYPE_INTEGER;
+ in_param.integer.value = device + 1;
+
+ status = acpi_evaluate_object(NULL, "\\_SB_.DECN", &input, &output);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_WARNING "IdeaPAD \\_SB_.DECN method failed %d. Is this an IdeaPAD?\n", status);
+ return -ENODEV;
+ }
+ if (out_obj.type != ACPI_TYPE_INTEGER) {
+ printk(KERN_WARNING "IdeaPAD \\_SB_.DECN method returned unexpected type\n");
+ return -ENODEV;
+ }
+ return out_obj.integer.value;
+}
+
+static int ideapad_dev_get_state(int device)
+{
+ acpi_status status;
+ union acpi_object in_param;
+ struct acpi_object_list input = { 1, &in_param };
+ struct acpi_buffer output;
+ union acpi_object out_obj;
+
+ output.length = sizeof(out_obj);
+ output.pointer = &out_obj;
+
+ in_param.type = ACPI_TYPE_INTEGER;
+ in_param.integer.value = device + 1;
+
+ status = acpi_evaluate_object(NULL, "\\_SB_.GECN", &input, &output);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_WARNING "IdeaPAD \\_SB_.GECN method failed %d\n", status);
+ return -ENODEV;
+ }
+ if (out_obj.type != ACPI_TYPE_INTEGER) {
+ printk(KERN_WARNING "IdeaPAD \\_SB_.GECN method returned unexpected type\n");
+ return -ENODEV;
+ }
+ return out_obj.integer.value;
+}
+
+static int ideapad_dev_set_state(int device, int state)
+{
+ acpi_status status;
+ union acpi_object in_params[2];
+ struct acpi_object_list input = { 2, in_params };
+
+ in_params[0].type = ACPI_TYPE_INTEGER;
+ in_params[0].integer.value = device + 1;
+ in_params[1].type = ACPI_TYPE_INTEGER;
+ in_params[1].integer.value = state;
+
+ status = acpi_evaluate_object(NULL, "\\_SB_.SECN", &input, NULL);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_WARNING "IdeaPAD \\_SB_.SECN method failed %d\n", status);
+ return -ENODEV;
+ }
+ return 0;
+}
+static ssize_t show_ideapad_cam(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int state = ideapad_dev_get_state(IDEAPAD_DEV_CAMERA);
+ if (state < 0)
+ return state;
+
+ return sprintf(buf, "%d\n", state);
+}
+
+static ssize_t store_ideapad_cam(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret, state;
+
+ if (!count)
+ return 0;
+ if (sscanf(buf, "%i", &state) != 1)
+ return -EINVAL;
+ ret = ideapad_dev_set_state(IDEAPAD_DEV_CAMERA, !!state);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+static DEVICE_ATTR(camera_power, 0644, show_ideapad_cam, store_ideapad_cam);
+
+static int ideapad_rfk_set(void *data, bool blocked)
+{
+ int device = (unsigned long)data;
+
+ if (device == IDEAPAD_DEV_KILLSW)
+ return -EINVAL;
+ return ideapad_dev_set_state(device, !blocked);
+}
+
+static struct rfkill_ops ideapad_rfk_ops = {
+ .set_block = ideapad_rfk_set,
+};
+
+static void ideapad_sync_rfk_state(struct acpi_device *adevice)
+{
+ struct ideapad_private *priv = dev_get_drvdata(&adevice->dev);
+ int hw_blocked = !ideapad_dev_get_state(IDEAPAD_DEV_KILLSW);
+ int i;
+
+ rfkill_set_hw_state(priv->rfk[IDEAPAD_DEV_KILLSW], hw_blocked);
+ for (i = IDEAPAD_DEV_WLAN; i < IDEAPAD_DEV_KILLSW; i++)
+ if (priv->rfk[i])
+ rfkill_set_hw_state(priv->rfk[i], hw_blocked);
+ if (hw_blocked)
+ return;
+
+ for (i = IDEAPAD_DEV_WLAN; i < IDEAPAD_DEV_KILLSW; i++)
+ if (priv->rfk[i])
+ rfkill_set_sw_state(priv->rfk[i], !ideapad_dev_get_state(i));
+}
+
+static int ideapad_register_rfkill(struct acpi_device *adevice, int dev)
+{
+ struct ideapad_private *priv = dev_get_drvdata(&adevice->dev);
+ int ret;
+
+ priv->rfk[dev] = rfkill_alloc(ideapad_rfk_data[dev-1].name, &adevice->dev,
+ ideapad_rfk_data[dev-1].type, &ideapad_rfk_ops,
+ (void *)(long)dev);
+ if (!priv->rfk[dev])
+ return -ENOMEM;
+
+ ret = rfkill_register(priv->rfk[dev]);
+ if (ret) {
+ rfkill_destroy(priv->rfk[dev]);
+ return ret;
+ }
+ return 0;
+}
+
+static void ideapad_unregister_rfkill(struct acpi_device *adevice, int dev)
+{
+ struct ideapad_private *priv = dev_get_drvdata(&adevice->dev);
+
+ if (!priv->rfk[dev])
+ return;
+
+ rfkill_unregister(priv->rfk[dev]);
+ rfkill_destroy(priv->rfk[dev]);
+}
+
+static const struct acpi_device_id ideapad_device_ids[] = {
+ { "VPC2004", 0},
+ { "", 0},
+};
+MODULE_DEVICE_TABLE(acpi, ideapad_device_ids);
+
+static int ideapad_acpi_add(struct acpi_device *adevice)
+{
+ int i;
+ int devs_present[5];
+ struct ideapad_private *priv;
+
+ for (i = IDEAPAD_DEV_CAMERA; i < IDEAPAD_DEV_KILLSW; i++) {
+ devs_present[i] = ideapad_dev_exists(i);
+ if (devs_present[i] < 0)
+ return devs_present[i];
+ }
+
+ /* The hardware switch is always present */
+ devs_present[IDEAPAD_DEV_KILLSW] = 1;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ if (devs_present[IDEAPAD_DEV_CAMERA]) {
+ int ret = device_create_file(&adevice->dev, &dev_attr_camera_power);
+ if (ret) {
+ kfree(priv);
+ return ret;
+ }
+ }
+
+ dev_set_drvdata(&adevice->dev, priv);
+ for (i = IDEAPAD_DEV_WLAN; i <= IDEAPAD_DEV_KILLSW; i++) {
+ if (!devs_present[i])
+ continue;
+
+ ideapad_register_rfkill(adevice, i);
+ }
+ ideapad_sync_rfk_state(adevice);
+ return 0;
+}
+
+static int ideapad_acpi_remove(struct acpi_device *adevice, int type)
+{
+ struct ideapad_private *priv = dev_get_drvdata(&adevice->dev);
+ int i;
+
+ device_remove_file(&adevice->dev, &dev_attr_camera_power);
+
+ for (i = IDEAPAD_DEV_WLAN; i <= IDEAPAD_DEV_KILLSW; i++)
+ ideapad_unregister_rfkill(adevice, i);
+
+ dev_set_drvdata(&adevice->dev, NULL);
+ kfree(priv);
+ return 0;
+}
+
+static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event)
+{
+ ideapad_sync_rfk_state(adevice);
+}
+
+static struct acpi_driver ideapad_acpi_driver = {
+ .name = "ideapad_acpi",
+ .class = "IdeaPad",
+ .ids = ideapad_device_ids,
+ .ops.add = ideapad_acpi_add,
+ .ops.remove = ideapad_acpi_remove,
+ .ops.notify = ideapad_acpi_notify,
+ .owner = THIS_MODULE,
+};
+
+
+static int __init ideapad_acpi_module_init(void)
+{
+ acpi_bus_register_driver(&ideapad_acpi_driver);
+
+ return 0;
+}
+
+
+static void __exit ideapad_acpi_module_exit(void)
+{
+ acpi_bus_unregister_driver(&ideapad_acpi_driver);
+
+}
+
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("IdeaPad ACPI Extras");
+MODULE_LICENSE("GPL");
+
+module_init(ideapad_acpi_module_init);
+module_exit(ideapad_acpi_module_exit);
limits = &ips_lv_limits;
else if (strstr(boot_cpu_data.x86_model_id, "CPU U"))
limits = &ips_ulv_limits;
- else
+ else {
dev_info(&ips->dev->dev, "No CPUID match found.\n");
+ goto out;
+ }
rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_power);
tdp = turbo_power & TURBO_TDP_MASK;
spin_lock_init(&ips->turbo_status_lock);
+ ret = pci_enable_device(dev);
+ if (ret) {
+ dev_err(&dev->dev, "can't enable PCI device, aborting\n");
+ goto error_free;
+ }
+
if (!pci_resource_start(dev, 0)) {
dev_err(&dev->dev, "TBAR not assigned, aborting\n");
ret = -ENXIO;
goto error_free;
}
- ret = pci_enable_device(dev);
- if (ret) {
- dev_err(&dev->dev, "can't enable PCI device, aborting\n");
- goto error_free;
- }
ips->regmap = ioremap(pci_resource_start(dev, 0),
pci_resource_len(dev, 0));
TP_ACPI_HOTKEYSCAN_VOLUMEDOWN,
TP_ACPI_HOTKEYSCAN_MUTE,
TP_ACPI_HOTKEYSCAN_THINKPAD,
+ TP_ACPI_HOTKEYSCAN_UNK1,
+ TP_ACPI_HOTKEYSCAN_UNK2,
+ TP_ACPI_HOTKEYSCAN_UNK3,
+ TP_ACPI_HOTKEYSCAN_UNK4,
+ TP_ACPI_HOTKEYSCAN_UNK5,
+ TP_ACPI_HOTKEYSCAN_UNK6,
+ TP_ACPI_HOTKEYSCAN_UNK7,
+ TP_ACPI_HOTKEYSCAN_UNK8,
+
+ /* Hotkey keymap size */
+ TPACPI_HOTKEY_MAP_LEN
};
enum { /* Keys/events available through NVRAM polling */
TPACPI_Q_IBM('1', 'D', TPACPI_HK_Q_INIMASK), /* X22, X23, X24 */
};
+typedef u16 tpacpi_keymap_t[TPACPI_HOTKEY_MAP_LEN];
+
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
/* Requirements for changing the default keymaps:
* If the above is too much to ask, don't change the keymap.
* Ask the thinkpad-acpi maintainer to do it, instead.
*/
- static u16 ibm_keycode_map[] __initdata = {
+
+ enum keymap_index {
+ TPACPI_KEYMAP_IBM_GENERIC = 0,
+ TPACPI_KEYMAP_LENOVO_GENERIC,
+ };
+
+ static const tpacpi_keymap_t tpacpi_keymaps[] __initconst = {
+ /* Generic keymap for IBM ThinkPads */
+ [TPACPI_KEYMAP_IBM_GENERIC] = {
/* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */
- KEY_FN_F1, KEY_FN_F2, KEY_COFFEE, KEY_SLEEP,
+ KEY_FN_F1, KEY_BATTERY, KEY_COFFEE, KEY_SLEEP,
KEY_WLAN, KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8,
KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND,
/* (assignments unknown, please report if found) */
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
- };
- static u16 lenovo_keycode_map[] __initdata = {
+ },
+
+ /* Generic keymap for Lenovo ThinkPads */
+ [TPACPI_KEYMAP_LENOVO_GENERIC] = {
/* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */
KEY_FN_F1, KEY_COFFEE, KEY_BATTERY, KEY_SLEEP,
- KEY_WLAN, KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8,
+ KEY_WLAN, KEY_CAMERA, KEY_SWITCHVIDEOMODE, KEY_FN_F8,
KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND,
/* Scan codes 0x0C to 0x1F: Other ACPI HKEY hot keys */
/* (assignments unknown, please report if found) */
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+ },
+ };
+
+ static const struct tpacpi_quirk tpacpi_keymap_qtable[] __initconst = {
+ /* Generic maps (fallback) */
+ {
+ .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = TPACPI_KEYMAP_IBM_GENERIC,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_LENOVO,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = TPACPI_KEYMAP_LENOVO_GENERIC,
+ },
};
-#define TPACPI_HOTKEY_MAP_LEN ARRAY_SIZE(ibm_keycode_map)
-#define TPACPI_HOTKEY_MAP_SIZE sizeof(ibm_keycode_map)
-#define TPACPI_HOTKEY_MAP_TYPESIZE sizeof(ibm_keycode_map[0])
+#define TPACPI_HOTKEY_MAP_SIZE sizeof(tpacpi_keymap_t)
+#define TPACPI_HOTKEY_MAP_TYPESIZE sizeof(tpacpi_keymap_t[0])
int res, i;
int status;
bool tabletsw_state = false;
unsigned long quirks;
+ unsigned long keymap_id;
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"initializing hotkey subdriver\n");
goto err_exit;
/* Set up key map */
-
hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
GFP_KERNEL);
if (!hotkey_keycode_map) {
goto err_exit;
}
- if (tpacpi_is_lenovo()) {
- dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
- "using Lenovo default hot key map\n");
- memcpy(hotkey_keycode_map, &lenovo_keycode_map,
- TPACPI_HOTKEY_MAP_SIZE);
- } else {
- dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
- "using IBM default hot key map\n");
- memcpy(hotkey_keycode_map, &ibm_keycode_map,
- TPACPI_HOTKEY_MAP_SIZE);
- }
+ keymap_id = tpacpi_check_quirks(tpacpi_keymap_qtable,
+ ARRAY_SIZE(tpacpi_keymap_qtable));
+ BUG_ON(keymap_id >= ARRAY_SIZE(tpacpi_keymaps));
+ dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
+ "using keymap number %lu\n", keymap_id);
+
+ memcpy(hotkey_keycode_map, &tpacpi_keymaps[keymap_id],
+ TPACPI_HOTKEY_MAP_SIZE);
input_set_capability(tpacpi_inputdev, EV_MSC, MSC_SCAN);
tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE;
*send_acpi_ev = true;
*ignore_acpi_ev = false;
- if (scancode > 0 && scancode < 0x21) {
+ /* HKEY event 0x1001 is scancode 0x00 */
+ if (scancode > 0 && scancode <= TPACPI_HOTKEY_MAP_LEN) {
scancode--;
if (!(hotkey_source_mask & (1 << scancode))) {
tpacpi_input_send_key_masked(scancode);
/* --------------------------------------------------------------------- */
+/*
+ * Call _BCL method of video device. On some ThinkPads this will
+ * switch the firmware to the ACPI brightness control mode.
+ */
+
static int __init tpacpi_query_bcl_levels(acpi_handle handle)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
int rc;
- if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) {
+ if (ACPI_SUCCESS(acpi_evaluate_object(handle, "_BCL", NULL, &buffer))) {
obj = (union acpi_object *)buffer.pointer;
if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
printk(TPACPI_ERR "Unknown _BCL data, "
return rc;
}
-static acpi_status __init tpacpi_acpi_walk_find_bcl(acpi_handle handle,
- u32 lvl, void *context, void **rv)
-{
- char name[ACPI_PATH_SEGMENT_LENGTH];
- struct acpi_buffer buffer = { sizeof(name), &name };
-
- if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) &&
- !strncmp("_BCL", name, sizeof(name) - 1)) {
- BUG_ON(!rv || !*rv);
- **(int **)rv = tpacpi_query_bcl_levels(handle);
- return AE_CTRL_TERMINATE;
- } else {
- return AE_OK;
- }
-}
/*
* Returns 0 (no ACPI _BCL or _BCL invalid), or size of brightness map
*/
static unsigned int __init tpacpi_check_std_acpi_brightness_support(void)
{
- int status;
+ acpi_handle video_device;
int bcl_levels = 0;
- void *bcl_ptr = &bcl_levels;
-
- if (!vid_handle)
- TPACPI_ACPIHANDLE_INIT(vid);
-
- if (!vid_handle)
- return 0;
-
- /*
- * Search for a _BCL method, and execute it. This is safe on all
- * ThinkPads, and as a side-effect, _BCL will place a Lenovo Vista
- * BIOS in ACPI backlight control mode. We do NOT have to care
- * about calling the _BCL method in an enabled video device, any
- * will do for our purposes.
- */
- status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3,
- tpacpi_acpi_walk_find_bcl, NULL, NULL,
- &bcl_ptr);
+ tpacpi_acpi_handle_locate("video", ACPI_VIDEO_HID, &video_device);
+ if (video_device)
+ bcl_levels = tpacpi_query_bcl_levels(video_device);
- if (ACPI_SUCCESS(status) && bcl_levels > 2) {
- tp_features.bright_acpimode = 1;
- return bcl_levels - 2;
- }
+ tp_features.bright_acpimode = (bcl_levels > 0);
- return 0;
+ return (bcl_levels > 2) ? (bcl_levels - 2) : 0;
}
/*
if (tp_features.bright_unkfw)
return 1;
- if (tp_features.bright_acpimode) {
- if (acpi_video_backlight_support()) {
- if (brightness_enable > 1) {
- printk(TPACPI_NOTICE
- "Standard ACPI backlight interface "
- "available, not loading native one.\n");
- return 1;
- } else if (brightness_enable == 1) {
- printk(TPACPI_NOTICE
- "Backlight control force enabled, even if standard "
- "ACPI backlight interface is available\n");
- }
- } else {
- if (brightness_enable > 1) {
- printk(TPACPI_NOTICE
- "Standard ACPI backlight interface not "
- "available, thinkpad_acpi native "
- "brightness control enabled\n");
- }
- }
- }
-
if (!brightness_enable) {
dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
"brightness support disabled by "
return 1;
}
+ if (acpi_video_backlight_support()) {
+ if (brightness_enable > 1) {
+ printk(TPACPI_INFO
+ "Standard ACPI backlight interface "
+ "available, not loading native one.\n");
+ return 1;
+ } else if (brightness_enable == 1) {
+ printk(TPACPI_WARN
+ "Cannot enable backlight brightness support, "
+ "ACPI is already handling it. Refer to the "
+ "acpi_backlight kernel parameter\n");
+ return 1;
+ }
+ } else if (tp_features.bright_acpimode && brightness_enable > 1) {
+ printk(TPACPI_NOTICE
+ "Standard ACPI backlight interface not "
+ "available, thinkpad_acpi native "
+ "brightness control enabled\n");
+ }
+
/*
* Check for module parameter bogosity, note that we
* init brightness_mode to TPACPI_BRGHT_MODE_MAX in order to be
help
Say Y to include support for the battery on the Zipit Z2.
+config BATTERY_S3C_ADC
+ tristate "Battery driver for Samsung ADC based monitoring"
+ depends on S3C_ADC
+ help
+ Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
+
config CHARGER_PCF50633
tristate "NXP PCF50633 MBC"
depends on MFD_PCF50633
This driver can be build as a module. If so, the module will be
called jz4740-battery.
+config BATTERY_INTEL_MID
+ tristate "Battery driver for Intel MID platforms"
+ depends on INTEL_SCU_IPC && SPI
+ help
+ Say Y here to enable the battery driver on Intel MID
+ platforms.
+
endif # POWER_SUPPLY
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
+obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
+obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
--- /dev/null
+/*
+ * intel_mid_battery.c - Intel MID PMIC Battery Driver
+ *
+ * Copyright (C) 2009 Intel Corporation
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ * Author: Nithish Mahalingam <nithish.mahalingam@intel.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/jiffies.h>
+#include <linux/param.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include <asm/intel_scu_ipc.h>
+
+#define DRIVER_NAME "pmic_battery"
+
+/*********************************************************************
+ * Generic defines
+ *********************************************************************/
+
+static int debug;
+module_param(debug, int, 0444);
+MODULE_PARM_DESC(debug, "Flag to enable PMIC Battery debug messages.");
+
+#define PMIC_BATT_DRV_INFO_UPDATED 1
+#define PMIC_BATT_PRESENT 1
+#define PMIC_BATT_NOT_PRESENT 0
+#define PMIC_USB_PRESENT PMIC_BATT_PRESENT
+#define PMIC_USB_NOT_PRESENT PMIC_BATT_NOT_PRESENT
+
+/* pmic battery register related */
+#define PMIC_BATT_CHR_SCHRGINT_ADDR 0xD2
+#define PMIC_BATT_CHR_SBATOVP_MASK (1 << 1)
+#define PMIC_BATT_CHR_STEMP_MASK (1 << 2)
+#define PMIC_BATT_CHR_SCOMP_MASK (1 << 3)
+#define PMIC_BATT_CHR_SUSBDET_MASK (1 << 4)
+#define PMIC_BATT_CHR_SBATDET_MASK (1 << 5)
+#define PMIC_BATT_CHR_SDCLMT_MASK (1 << 6)
+#define PMIC_BATT_CHR_SUSBOVP_MASK (1 << 7)
+#define PMIC_BATT_CHR_EXCPT_MASK 0xC6
+#define PMIC_BATT_ADC_ACCCHRG_MASK (1 << 31)
+#define PMIC_BATT_ADC_ACCCHRGVAL_MASK 0x7FFFFFFF
+
+/* pmic ipc related */
+#define PMIC_BATT_CHR_IPC_FCHRG_SUBID 0x4
+#define PMIC_BATT_CHR_IPC_TCHRG_SUBID 0x6
+
+/* types of battery charging */
+enum batt_charge_type {
+ BATT_USBOTG_500MA_CHARGE,
+ BATT_USBOTG_TRICKLE_CHARGE,
+};
+
+/* valid battery events */
+enum batt_event {
+ BATT_EVENT_BATOVP_EXCPT,
+ BATT_EVENT_USBOVP_EXCPT,
+ BATT_EVENT_TEMP_EXCPT,
+ BATT_EVENT_DCLMT_EXCPT,
+ BATT_EVENT_EXCPT
+};
+
+
+/*********************************************************************
+ * Battery properties
+ *********************************************************************/
+
+/*
+ * pmic battery info
+ */
+struct pmic_power_module_info {
+ bool is_dev_info_updated;
+ struct device *dev;
+ /* pmic battery data */
+ unsigned long update_time; /* jiffies when data read */
+ unsigned int usb_is_present;
+ unsigned int batt_is_present;
+ unsigned int batt_health;
+ unsigned int usb_health;
+ unsigned int batt_status;
+ unsigned int batt_charge_now; /* in mAS */
+ unsigned int batt_prev_charge_full; /* in mAS */
+ unsigned int batt_charge_rate; /* in units per second */
+
+ struct power_supply usb;
+ struct power_supply batt;
+ int irq; /* GPE_ID or IRQ# */
+ struct workqueue_struct *monitor_wqueue;
+ struct delayed_work monitor_battery;
+ struct work_struct handler;
+};
+
+static unsigned int delay_time = 2000; /* in ms */
+
+/*
+ * pmic ac properties
+ */
+static enum power_supply_property pmic_usb_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_HEALTH,
+};
+
+/*
+ * pmic battery properties
+ */
+static enum power_supply_property pmic_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+};
+
+
+/*
+ * Glue functions for talking to the IPC
+ */
+
+struct battery_property {
+ u32 capacity; /* Charger capacity */
+ u8 crnt; /* Quick charge current value*/
+ u8 volt; /* Fine adjustment of constant charge voltage */
+ u8 prot; /* CHRGPROT register value */
+ u8 prot2; /* CHRGPROT1 register value */
+ u8 timer; /* Charging timer */
+};
+
+#define IPCMSG_BATTERY 0xEF
+
+/* Battery coulomb counter accumulator commands */
+#define IPC_CMD_CC_WR 0 /* Update coulomb counter value */
+#define IPC_CMD_CC_RD 1 /* Read coulomb counter value */
+#define IPC_CMD_BATTERY_PROPERTY 2 /* Read Battery property */
+
+/**
+ * pmic_scu_ipc_battery_cc_read - read battery cc
+ * @value: battery coulomb counter read
+ *
+ * Reads the battery couloumb counter value, returns 0 on success, or
+ * an error code
+ *
+ * This function may sleep. Locking for SCU accesses is handled for
+ * the caller.
+ */
+static int pmic_scu_ipc_battery_cc_read(u32 *value)
+{
+ return intel_scu_ipc_command(IPCMSG_BATTERY, IPC_CMD_CC_RD,
+ NULL, 0, value, 1);
+}
+
+/**
+ * pmic_scu_ipc_battery_property_get - fetch properties
+ * @prop: battery properties
+ *
+ * Retrieve the battery properties from the power management
+ *
+ * This function may sleep. Locking for SCU accesses is handled for
+ * the caller.
+ */
+static int pmic_scu_ipc_battery_property_get(struct battery_property *prop)
+{
+ u32 data[3];
+ u8 *p = (u8 *)&data[1];
+ int err = intel_scu_ipc_command(IPC_CMD_BATTERY_PROPERTY,
+ IPCMSG_BATTERY, NULL, 0, data, 3);
+
+ prop->capacity = data[0];
+ prop->crnt = *p++;
+ prop->volt = *p++;
+ prop->prot = *p++;
+ prop->prot2 = *p++;
+ prop->timer = *p++;
+
+ return err;
+}
+
+/**
+ * pmic_scu_ipc_set_charger - set charger
+ * @charger: charger to select
+ *
+ * Switch the charging mode for the SCU
+ */
+
+static int pmic_scu_ipc_set_charger(int charger)
+{
+ return intel_scu_ipc_simple_command(charger, IPCMSG_BATTERY);
+}
+
+/**
+ * pmic_battery_log_event - log battery events
+ * @event: battery event to be logged
+ * Context: can sleep
+ *
+ * There are multiple battery events which may be of interest to users;
+ * this battery function logs the different battery events onto the
+ * kernel log messages.
+ */
+static void pmic_battery_log_event(enum batt_event event)
+{
+ printk(KERN_WARNING "pmic-battery: ");
+ switch (event) {
+ case BATT_EVENT_BATOVP_EXCPT:
+ printk(KERN_CONT "battery overvoltage condition\n");
+ break;
+ case BATT_EVENT_USBOVP_EXCPT:
+ printk(KERN_CONT "usb charger overvoltage condition\n");
+ break;
+ case BATT_EVENT_TEMP_EXCPT:
+ printk(KERN_CONT "high battery temperature condition\n");
+ break;
+ case BATT_EVENT_DCLMT_EXCPT:
+ printk(KERN_CONT "over battery charge current condition\n");
+ break;
+ default:
+ printk(KERN_CONT "charger/battery exception %d\n", event);
+ break;
+ }
+}
+
+/**
+ * pmic_battery_read_status - read battery status information
+ * @pbi: device info structure to update the read information
+ * Context: can sleep
+ *
+ * PMIC power source information need to be updated based on the data read
+ * from the PMIC battery registers.
+ *
+ */
+static void pmic_battery_read_status(struct pmic_power_module_info *pbi)
+{
+ unsigned int update_time_intrvl;
+ unsigned int chrg_val;
+ u32 ccval;
+ u8 r8;
+ struct battery_property batt_prop;
+ int batt_present = 0;
+ int usb_present = 0;
+ int batt_exception = 0;
+
+ /* make sure the last batt_status read happened delay_time before */
+ if (pbi->update_time && time_before(jiffies, pbi->update_time +
+ msecs_to_jiffies(delay_time)))
+ return;
+
+ update_time_intrvl = jiffies_to_msecs(jiffies - pbi->update_time);
+ pbi->update_time = jiffies;
+
+ /* read coulomb counter registers and schrgint register */
+ if (pmic_scu_ipc_battery_cc_read(&ccval)) {
+ dev_warn(pbi->dev, "%s(): ipc config cmd failed\n",
+ __func__);
+ return;
+ }
+
+ if (intel_scu_ipc_ioread8(PMIC_BATT_CHR_SCHRGINT_ADDR, &r8)) {
+ dev_warn(pbi->dev, "%s(): ipc pmic read failed\n",
+ __func__);
+ return;
+ }
+
+ /*
+ * set pmic_power_module_info members based on pmic register values
+ * read.
+ */
+
+ /* set batt_is_present */
+ if (r8 & PMIC_BATT_CHR_SBATDET_MASK) {
+ pbi->batt_is_present = PMIC_BATT_PRESENT;
+ batt_present = 1;
+ } else {
+ pbi->batt_is_present = PMIC_BATT_NOT_PRESENT;
+ pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ pbi->batt_status = POWER_SUPPLY_STATUS_UNKNOWN;
+ }
+
+ /* set batt_health */
+ if (batt_present) {
+ if (r8 & PMIC_BATT_CHR_SBATOVP_MASK) {
+ pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ pmic_battery_log_event(BATT_EVENT_BATOVP_EXCPT);
+ batt_exception = 1;
+ } else if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) {
+ pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT);
+ batt_exception = 1;
+ } else if (r8 & PMIC_BATT_CHR_STEMP_MASK) {
+ pbi->batt_health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ pmic_battery_log_event(BATT_EVENT_TEMP_EXCPT);
+ batt_exception = 1;
+ } else {
+ pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD;
+ }
+ }
+
+ /* set usb_is_present */
+ if (r8 & PMIC_BATT_CHR_SUSBDET_MASK) {
+ pbi->usb_is_present = PMIC_USB_PRESENT;
+ usb_present = 1;
+ } else {
+ pbi->usb_is_present = PMIC_USB_NOT_PRESENT;
+ pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ }
+
+ if (usb_present) {
+ if (r8 & PMIC_BATT_CHR_SUSBOVP_MASK) {
+ pbi->usb_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ pmic_battery_log_event(BATT_EVENT_USBOVP_EXCPT);
+ } else {
+ pbi->usb_health = POWER_SUPPLY_HEALTH_GOOD;
+ }
+ }
+
+ chrg_val = ccval & PMIC_BATT_ADC_ACCCHRGVAL_MASK;
+
+ /* set batt_prev_charge_full to battery capacity the first time */
+ if (!pbi->is_dev_info_updated) {
+ if (pmic_scu_ipc_battery_property_get(&batt_prop)) {
+ dev_warn(pbi->dev, "%s(): ipc config cmd failed\n",
+ __func__);
+ return;
+ }
+ pbi->batt_prev_charge_full = batt_prop.capacity;
+ }
+
+ /* set batt_status */
+ if (batt_present && !batt_exception) {
+ if (r8 & PMIC_BATT_CHR_SCOMP_MASK) {
+ pbi->batt_status = POWER_SUPPLY_STATUS_FULL;
+ pbi->batt_prev_charge_full = chrg_val;
+ } else if (ccval & PMIC_BATT_ADC_ACCCHRG_MASK) {
+ pbi->batt_status = POWER_SUPPLY_STATUS_DISCHARGING;
+ } else {
+ pbi->batt_status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+ }
+
+ /* set batt_charge_rate */
+ if (pbi->is_dev_info_updated && batt_present && !batt_exception) {
+ if (pbi->batt_status == POWER_SUPPLY_STATUS_DISCHARGING) {
+ if (pbi->batt_charge_now - chrg_val) {
+ pbi->batt_charge_rate = ((pbi->batt_charge_now -
+ chrg_val) * 1000 * 60) /
+ update_time_intrvl;
+ }
+ } else if (pbi->batt_status == POWER_SUPPLY_STATUS_CHARGING) {
+ if (chrg_val - pbi->batt_charge_now) {
+ pbi->batt_charge_rate = ((chrg_val -
+ pbi->batt_charge_now) * 1000 * 60) /
+ update_time_intrvl;
+ }
+ } else
+ pbi->batt_charge_rate = 0;
+ } else {
+ pbi->batt_charge_rate = -1;
+ }
+
+ /* batt_charge_now */
+ if (batt_present && !batt_exception)
+ pbi->batt_charge_now = chrg_val;
+ else
+ pbi->batt_charge_now = -1;
+
+ pbi->is_dev_info_updated = PMIC_BATT_DRV_INFO_UPDATED;
+}
+
+/**
+ * pmic_usb_get_property - usb power source get property
+ * @psy: usb power supply context
+ * @psp: usb power source property
+ * @val: usb power source property value
+ * Context: can sleep
+ *
+ * PMIC usb power source property needs to be provided to power_supply
+ * subsytem for it to provide the information to users.
+ */
+static int pmic_usb_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pmic_power_module_info *pbi = container_of(psy,
+ struct pmic_power_module_info, usb);
+
+ /* update pmic_power_module_info members */
+ pmic_battery_read_status(pbi);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = pbi->usb_is_present;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = pbi->usb_health;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline unsigned long mAStouAh(unsigned long v)
+{
+ /* seconds to hours, mA to µA */
+ return (v * 1000) / 3600;
+}
+
+/**
+ * pmic_battery_get_property - battery power source get property
+ * @psy: battery power supply context
+ * @psp: battery power source property
+ * @val: battery power source property value
+ * Context: can sleep
+ *
+ * PMIC battery power source property needs to be provided to power_supply
+ * subsytem for it to provide the information to users.
+ */
+static int pmic_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pmic_power_module_info *pbi = container_of(psy,
+ struct pmic_power_module_info, batt);
+
+ /* update pmic_power_module_info members */
+ pmic_battery_read_status(pbi);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = pbi->batt_status;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = pbi->batt_health;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = pbi->batt_is_present;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ val->intval = mAStouAh(pbi->batt_charge_now);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ val->intval = mAStouAh(pbi->batt_prev_charge_full);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * pmic_battery_monitor - monitor battery status
+ * @work: work structure
+ * Context: can sleep
+ *
+ * PMIC battery status needs to be monitored for any change
+ * and information needs to be frequently updated.
+ */
+static void pmic_battery_monitor(struct work_struct *work)
+{
+ struct pmic_power_module_info *pbi = container_of(work,
+ struct pmic_power_module_info, monitor_battery.work);
+
+ /* update pmic_power_module_info members */
+ pmic_battery_read_status(pbi);
+ queue_delayed_work(pbi->monitor_wqueue, &pbi->monitor_battery, HZ * 10);
+}
+
+/**
+ * pmic_battery_set_charger - set battery charger
+ * @pbi: device info structure
+ * @chrg: charge mode to set battery charger in
+ * Context: can sleep
+ *
+ * PMIC battery charger needs to be enabled based on the usb charge
+ * capabilities connected to the platform.
+ */
+static int pmic_battery_set_charger(struct pmic_power_module_info *pbi,
+ enum batt_charge_type chrg)
+{
+ int retval;
+
+ /* set usblmt bits and chrgcntl register bits appropriately */
+ switch (chrg) {
+ case BATT_USBOTG_500MA_CHARGE:
+ retval = pmic_scu_ipc_set_charger(PMIC_BATT_CHR_IPC_FCHRG_SUBID);
+ break;
+ case BATT_USBOTG_TRICKLE_CHARGE:
+ retval = pmic_scu_ipc_set_charger(PMIC_BATT_CHR_IPC_TCHRG_SUBID);
+ break;
+ default:
+ dev_warn(pbi->dev, "%s(): out of range usb charger "
+ "charge detected\n", __func__);
+ return -EINVAL;
+ }
+
+ if (retval) {
+ dev_warn(pbi->dev, "%s(): ipc pmic read failed\n",
+ __func__);
+ return retval;;
+ }
+
+ return 0;
+}
+
+/**
+ * pmic_battery_interrupt_handler - pmic battery interrupt handler
+ * Context: interrupt context
+ *
+ * PMIC battery interrupt handler which will be called with either
+ * battery full condition occurs or usb otg & battery connect
+ * condition occurs.
+ */
+static irqreturn_t pmic_battery_interrupt_handler(int id, void *dev)
+{
+ struct pmic_power_module_info *pbi = dev;
+
+ schedule_work(&pbi->handler);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * pmic_battery_handle_intrpt - pmic battery service interrupt
+ * @work: work structure
+ * Context: can sleep
+ *
+ * PMIC battery needs to either update the battery status as full
+ * if it detects battery full condition caused the interrupt or needs
+ * to enable battery charger if it detects usb and battery detect
+ * caused the source of interrupt.
+ */
+static void pmic_battery_handle_intrpt(struct work_struct *work)
+{
+ struct pmic_power_module_info *pbi = container_of(work,
+ struct pmic_power_module_info, handler);
+ enum batt_charge_type chrg;
+ u8 r8;
+
+ if (intel_scu_ipc_ioread8(PMIC_BATT_CHR_SCHRGINT_ADDR, &r8)) {
+ dev_warn(pbi->dev, "%s(): ipc pmic read failed\n",
+ __func__);
+ return;
+ }
+ /* find the cause of the interrupt */
+ if (r8 & PMIC_BATT_CHR_SBATDET_MASK) {
+ pbi->batt_is_present = PMIC_BATT_PRESENT;
+ } else {
+ pbi->batt_is_present = PMIC_BATT_NOT_PRESENT;
+ pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ pbi->batt_status = POWER_SUPPLY_STATUS_UNKNOWN;
+ return;
+ }
+
+ if (r8 & PMIC_BATT_CHR_EXCPT_MASK) {
+ pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ pmic_battery_log_event(BATT_EVENT_EXCPT);
+ return;
+ } else {
+ pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD;
+ pbi->usb_health = POWER_SUPPLY_HEALTH_GOOD;
+ }
+
+ if (r8 & PMIC_BATT_CHR_SCOMP_MASK) {
+ u32 ccval;
+ pbi->batt_status = POWER_SUPPLY_STATUS_FULL;
+
+ if (pmic_scu_ipc_battery_cc_read(&ccval)) {
+ dev_warn(pbi->dev, "%s(): ipc config cmd "
+ "failed\n", __func__);
+ return;
+ }
+ pbi->batt_prev_charge_full = ccval &
+ PMIC_BATT_ADC_ACCCHRGVAL_MASK;
+ return;
+ }
+
+ if (r8 & PMIC_BATT_CHR_SUSBDET_MASK) {
+ pbi->usb_is_present = PMIC_USB_PRESENT;
+ } else {
+ pbi->usb_is_present = PMIC_USB_NOT_PRESENT;
+ pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ return;
+ }
+
+ /* setup battery charging */
+
+#if 0
+ /* check usb otg power capability and set charger accordingly */
+ retval = langwell_udc_maxpower(&power);
+ if (retval) {
+ dev_warn(pbi->dev,
+ "%s(): usb otg power query failed with error code %d\n",
+ __func__, retval);
+ return;
+ }
+
+ if (power >= 500)
+ chrg = BATT_USBOTG_500MA_CHARGE;
+ else
+#endif
+ chrg = BATT_USBOTG_TRICKLE_CHARGE;
+
+ /* enable battery charging */
+ if (pmic_battery_set_charger(pbi, chrg)) {
+ dev_warn(pbi->dev,
+ "%s(): failed to set up battery charging\n", __func__);
+ return;
+ }
+
+ dev_dbg(pbi->dev,
+ "pmic-battery: %s() - setting up battery charger successful\n",
+ __func__);
+}
+
+/**
+ * pmic_battery_probe - pmic battery initialize
+ * @irq: pmic battery device irq
+ * @dev: pmic battery device structure
+ * Context: can sleep
+ *
+ * PMIC battery initializes its internal data structue and other
+ * infrastructure components for it to work as expected.
+ */
+static __devinit int probe(int irq, struct device *dev)
+{
+ int retval = 0;
+ struct pmic_power_module_info *pbi;
+
+ dev_dbg(dev, "pmic-battery: found pmic battery device\n");
+
+ pbi = kzalloc(sizeof(*pbi), GFP_KERNEL);
+ if (!pbi) {
+ dev_err(dev, "%s(): memory allocation failed\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ pbi->dev = dev;
+ pbi->irq = irq;
+ dev_set_drvdata(dev, pbi);
+
+ /* initialize all required framework before enabling interrupts */
+ INIT_WORK(&pbi->handler, pmic_battery_handle_intrpt);
+ INIT_DELAYED_WORK(&pbi->monitor_battery, pmic_battery_monitor);
+ pbi->monitor_wqueue =
+ create_singlethread_workqueue(dev_name(dev));
+ if (!pbi->monitor_wqueue) {
+ dev_err(dev, "%s(): wqueue init failed\n", __func__);
+ retval = -ESRCH;
+ goto wqueue_failed;
+ }
+
+ /* register interrupt */
+ retval = request_irq(pbi->irq, pmic_battery_interrupt_handler,
+ 0, DRIVER_NAME, pbi);
+ if (retval) {
+ dev_err(dev, "%s(): cannot get IRQ\n", __func__);
+ goto requestirq_failed;
+ }
+
+ /* register pmic-batt with power supply subsystem */
+ pbi->batt.name = "pmic-batt";
+ pbi->batt.type = POWER_SUPPLY_TYPE_BATTERY;
+ pbi->batt.properties = pmic_battery_props;
+ pbi->batt.num_properties = ARRAY_SIZE(pmic_battery_props);
+ pbi->batt.get_property = pmic_battery_get_property;
+ retval = power_supply_register(dev, &pbi->batt);
+ if (retval) {
+ dev_err(dev,
+ "%s(): failed to register pmic battery device with power supply subsystem\n",
+ __func__);
+ goto power_reg_failed;
+ }
+
+ dev_dbg(dev, "pmic-battery: %s() - pmic battery device "
+ "registration with power supply subsystem successful\n",
+ __func__);
+
+ queue_delayed_work(pbi->monitor_wqueue, &pbi->monitor_battery, HZ * 1);
+
+ /* register pmic-usb with power supply subsystem */
+ pbi->usb.name = "pmic-usb";
+ pbi->usb.type = POWER_SUPPLY_TYPE_USB;
+ pbi->usb.properties = pmic_usb_props;
+ pbi->usb.num_properties = ARRAY_SIZE(pmic_usb_props);
+ pbi->usb.get_property = pmic_usb_get_property;
+ retval = power_supply_register(dev, &pbi->usb);
+ if (retval) {
+ dev_err(dev,
+ "%s(): failed to register pmic usb device with power supply subsystem\n",
+ __func__);
+ goto power_reg_failed_1;
+ }
+
+ if (debug)
+ printk(KERN_INFO "pmic-battery: %s() - pmic usb device "
+ "registration with power supply subsystem successful\n",
+ __func__);
+
+ return retval;
+
+power_reg_failed_1:
+ power_supply_unregister(&pbi->batt);
+power_reg_failed:
+ cancel_rearming_delayed_workqueue(pbi->monitor_wqueue,
+ &pbi->monitor_battery);
+requestirq_failed:
+ destroy_workqueue(pbi->monitor_wqueue);
+wqueue_failed:
+ kfree(pbi);
+
+ return retval;
+}
+
+static int __devinit platform_pmic_battery_probe(struct platform_device *pdev)
+{
+ return probe(pdev->id, &pdev->dev);
+}
+
+/**
+ * pmic_battery_remove - pmic battery finalize
+ * @dev: pmic battery device structure
+ * Context: can sleep
+ *
+ * PMIC battery finalizes its internal data structue and other
+ * infrastructure components that it initialized in
+ * pmic_battery_probe.
+ */
+
+static int __devexit platform_pmic_battery_remove(struct platform_device *pdev)
+{
+ struct pmic_power_module_info *pbi = dev_get_drvdata(&pdev->dev);
+
+ free_irq(pbi->irq, pbi);
+ cancel_rearming_delayed_workqueue(pbi->monitor_wqueue,
+ &pbi->monitor_battery);
+ destroy_workqueue(pbi->monitor_wqueue);
+
+ power_supply_unregister(&pbi->usb);
+ power_supply_unregister(&pbi->batt);
+
+ flush_scheduled_work();
+ kfree(pbi);
+ return 0;
+}
+
+static struct platform_driver platform_pmic_battery_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = platform_pmic_battery_probe,
+ .remove = __devexit_p(platform_pmic_battery_remove),
+};
+
+static int __init platform_pmic_battery_module_init(void)
+{
+ return platform_driver_register(&platform_pmic_battery_driver);
+}
+
+static void __exit platform_pmic_battery_module_exit(void)
+{
+ platform_driver_unregister(&platform_pmic_battery_driver);
+}
+
+module_init(platform_pmic_battery_module_init);
+module_exit(platform_pmic_battery_module_exit);
+
+MODULE_AUTHOR("Nithish Mahalingam <nithish.mahalingam@intel.com>");
+MODULE_DESCRIPTION("Intel Moorestown PMIC Battery Driver");
+MODULE_LICENSE("GPL");
/*
* Battery driver for One Laptop Per Child board.
*
- * Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2006-2010 David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
.attr = {
.name = "eeprom",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = 0,
.read = olpc_bat_eeprom_read,
--- /dev/null
+/*
+ * iPAQ h1930/h1940/rx1950 battery controler driver
+ * Copyright (c) Vasily Khoruzhick
+ * Based on h1940_battery.c by Arnaud Patard
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/s3c_adc_battery.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <plat/adc.h>
+
+#define BAT_POLL_INTERVAL 10000 /* ms */
+#define JITTER_DELAY 500 /* ms */
+
+struct s3c_adc_bat {
+ struct power_supply psy;
+ struct s3c_adc_client *client;
+ struct s3c_adc_bat_pdata *pdata;
+ int volt_value;
+ int cur_value;
+ unsigned int timestamp;
+ int level;
+ int status;
+ int cable_plugged:1;
+};
+
+static struct delayed_work bat_work;
+
+static void s3c_adc_bat_ext_power_changed(struct power_supply *psy)
+{
+ schedule_delayed_work(&bat_work,
+ msecs_to_jiffies(JITTER_DELAY));
+}
+
+static enum power_supply_property s3c_adc_backup_bat_props[] = {
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+};
+
+static int s3c_adc_backup_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct s3c_adc_bat *bat = container_of(psy, struct s3c_adc_bat, psy);
+
+ if (!bat) {
+ dev_err(psy->dev, "%s: no battery infos ?!\n", __func__);
+ return -EINVAL;
+ }
+
+ if (bat->volt_value < 0 ||
+ jiffies_to_msecs(jiffies - bat->timestamp) >
+ BAT_POLL_INTERVAL) {
+ bat->volt_value = s3c_adc_read(bat->client,
+ bat->pdata->backup_volt_channel);
+ bat->volt_value *= bat->pdata->backup_volt_mult;
+ bat->timestamp = jiffies;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = bat->volt_value;
+ return 0;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ val->intval = bat->pdata->backup_volt_min;
+ return 0;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = bat->pdata->backup_volt_max;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static struct s3c_adc_bat backup_bat = {
+ .psy = {
+ .name = "backup-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = s3c_adc_backup_bat_props,
+ .num_properties = ARRAY_SIZE(s3c_adc_backup_bat_props),
+ .get_property = s3c_adc_backup_bat_get_property,
+ .use_for_apm = 1,
+ },
+};
+
+static enum power_supply_property s3c_adc_main_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int calc_full_volt(int volt_val, int cur_val, int impedance)
+{
+ return volt_val + cur_val * impedance / 1000;
+}
+
+static int s3c_adc_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct s3c_adc_bat *bat = container_of(psy, struct s3c_adc_bat, psy);
+
+ int new_level;
+ int full_volt;
+ const struct s3c_adc_bat_thresh *lut = bat->pdata->lut_noac;
+ unsigned int lut_size = bat->pdata->lut_noac_cnt;
+
+ if (!bat) {
+ dev_err(psy->dev, "no battery infos ?!\n");
+ return -EINVAL;
+ }
+
+ if (bat->volt_value < 0 || bat->cur_value < 0 ||
+ jiffies_to_msecs(jiffies - bat->timestamp) >
+ BAT_POLL_INTERVAL) {
+ bat->volt_value = s3c_adc_read(bat->client,
+ bat->pdata->volt_channel) * bat->pdata->volt_mult;
+ bat->cur_value = s3c_adc_read(bat->client,
+ bat->pdata->current_channel) * bat->pdata->current_mult;
+ bat->timestamp = jiffies;
+ }
+
+ if (bat->cable_plugged &&
+ ((bat->pdata->gpio_charge_finished < 0) ||
+ !gpio_get_value(bat->pdata->gpio_charge_finished))) {
+ lut = bat->pdata->lut_acin;
+ lut_size = bat->pdata->lut_acin_cnt;
+ }
+
+ new_level = 100000;
+ full_volt = calc_full_volt((bat->volt_value / 1000),
+ (bat->cur_value / 1000), bat->pdata->internal_impedance);
+
+ if (full_volt < calc_full_volt(lut->volt, lut->cur,
+ bat->pdata->internal_impedance)) {
+ lut_size--;
+ while (lut_size--) {
+ int lut_volt1;
+ int lut_volt2;
+
+ lut_volt1 = calc_full_volt(lut[0].volt, lut[0].cur,
+ bat->pdata->internal_impedance);
+ lut_volt2 = calc_full_volt(lut[1].volt, lut[1].cur,
+ bat->pdata->internal_impedance);
+ if (full_volt < lut_volt1 && full_volt >= lut_volt2) {
+ new_level = (lut[1].level +
+ (lut[0].level - lut[1].level) *
+ (full_volt - lut_volt2) /
+ (lut_volt1 - lut_volt2)) * 1000;
+ break;
+ }
+ new_level = lut[1].level * 1000;
+ lut++;
+ }
+ }
+
+ bat->level = new_level;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (bat->pdata->gpio_charge_finished < 0)
+ val->intval = bat->level == 100000 ?
+ POWER_SUPPLY_STATUS_FULL : bat->status;
+ else
+ val->intval = bat->status;
+ return 0;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval = 100000;
+ return 0;
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
+ val->intval = 0;
+ return 0;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ val->intval = bat->level;
+ return 0;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = bat->volt_value;
+ return 0;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = bat->cur_value;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static struct s3c_adc_bat main_bat = {
+ .psy = {
+ .name = "main-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = s3c_adc_main_bat_props,
+ .num_properties = ARRAY_SIZE(s3c_adc_main_bat_props),
+ .get_property = s3c_adc_bat_get_property,
+ .external_power_changed = s3c_adc_bat_ext_power_changed,
+ .use_for_apm = 1,
+ },
+};
+
+static void s3c_adc_bat_work(struct work_struct *work)
+{
+ struct s3c_adc_bat *bat = &main_bat;
+ int is_charged;
+ int is_plugged;
+ static int was_plugged;
+
+ is_plugged = power_supply_am_i_supplied(&bat->psy);
+ bat->cable_plugged = is_plugged;
+ if (is_plugged != was_plugged) {
+ was_plugged = is_plugged;
+ if (is_plugged) {
+ if (bat->pdata->enable_charger)
+ bat->pdata->enable_charger();
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ } else {
+ if (bat->pdata->disable_charger)
+ bat->pdata->disable_charger();
+ bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ } else {
+ if ((bat->pdata->gpio_charge_finished >= 0) && is_plugged) {
+ is_charged = gpio_get_value(
+ main_bat.pdata->gpio_charge_finished);
+ if (is_charged) {
+ if (bat->pdata->disable_charger)
+ bat->pdata->disable_charger();
+ bat->status = POWER_SUPPLY_STATUS_FULL;
+ } else {
+ if (bat->pdata->enable_charger)
+ bat->pdata->enable_charger();
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+ }
+ }
+
+ power_supply_changed(&bat->psy);
+}
+
+static irqreturn_t s3c_adc_bat_charged(int irq, void *dev_id)
+{
+ schedule_delayed_work(&bat_work,
+ msecs_to_jiffies(JITTER_DELAY));
+ return IRQ_HANDLED;
+}
+
+static int __init s3c_adc_bat_probe(struct platform_device *pdev)
+{
+ struct s3c_adc_client *client;
+ struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+ int ret;
+
+ client = s3c_adc_register(pdev, NULL, NULL, 0);
+ if (IS_ERR(client)) {
+ dev_err(&pdev->dev, "cannot register adc\n");
+ return PTR_ERR(client);
+ }
+
+ platform_set_drvdata(pdev, client);
+
+ main_bat.client = client;
+ main_bat.pdata = pdata;
+ main_bat.volt_value = -1;
+ main_bat.cur_value = -1;
+ main_bat.cable_plugged = 0;
+ main_bat.status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ ret = power_supply_register(&pdev->dev, &main_bat.psy);
+ if (ret)
+ goto err_reg_main;
+ if (pdata->backup_volt_mult) {
+ backup_bat.client = client;
+ backup_bat.pdata = pdev->dev.platform_data;
+ backup_bat.volt_value = -1;
+ ret = power_supply_register(&pdev->dev, &backup_bat.psy);
+ if (ret)
+ goto err_reg_backup;
+ }
+
+ INIT_DELAYED_WORK(&bat_work, s3c_adc_bat_work);
+
+ if (pdata->gpio_charge_finished >= 0) {
+ ret = gpio_request(pdata->gpio_charge_finished, "charged");
+ if (ret)
+ goto err_gpio;
+
+ ret = request_irq(gpio_to_irq(pdata->gpio_charge_finished),
+ s3c_adc_bat_charged,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "battery charged", NULL);
+ if (ret)
+ goto err_irq;
+ }
+
+ if (pdata->init) {
+ ret = pdata->init();
+ if (ret)
+ goto err_platform;
+ }
+
+ dev_info(&pdev->dev, "successfully loaded\n");
+ device_init_wakeup(&pdev->dev, 1);
+
+ /* Schedule timer to check current status */
+ schedule_delayed_work(&bat_work,
+ msecs_to_jiffies(JITTER_DELAY));
+
+ return 0;
+
+err_platform:
+ if (pdata->gpio_charge_finished >= 0)
+ free_irq(gpio_to_irq(pdata->gpio_charge_finished), NULL);
+err_irq:
+ if (pdata->gpio_charge_finished >= 0)
+ gpio_free(pdata->gpio_charge_finished);
+err_gpio:
+ if (pdata->backup_volt_mult)
+ power_supply_unregister(&backup_bat.psy);
+err_reg_backup:
+ power_supply_unregister(&main_bat.psy);
+err_reg_main:
+ return ret;
+}
+
+static int s3c_adc_bat_remove(struct platform_device *pdev)
+{
+ struct s3c_adc_client *client = platform_get_drvdata(pdev);
+ struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+
+ power_supply_unregister(&main_bat.psy);
+ if (pdata->backup_volt_mult)
+ power_supply_unregister(&backup_bat.psy);
+
+ s3c_adc_release(client);
+
+ if (pdata->gpio_charge_finished >= 0) {
+ free_irq(gpio_to_irq(pdata->gpio_charge_finished), NULL);
+ gpio_free(pdata->gpio_charge_finished);
+ }
+
+ cancel_delayed_work(&bat_work);
+
+ if (pdata->exit)
+ pdata->exit();
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_adc_bat_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+
+ if (pdata->gpio_charge_finished >= 0) {
+ if (device_may_wakeup(&pdev->dev))
+ enable_irq_wake(
+ gpio_to_irq(pdata->gpio_charge_finished));
+ else {
+ disable_irq(gpio_to_irq(pdata->gpio_charge_finished));
+ main_bat.pdata->disable_charger();
+ }
+ }
+
+ return 0;
+}
+
+static int s3c_adc_bat_resume(struct platform_device *pdev)
+{
+ struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+
+ if (pdata->gpio_charge_finished >= 0) {
+ if (device_may_wakeup(&pdev->dev))
+ disable_irq_wake(
+ gpio_to_irq(pdata->gpio_charge_finished));
+ else
+ enable_irq(gpio_to_irq(pdata->gpio_charge_finished));
+ }
+
+ /* Schedule timer to check current status */
+ schedule_delayed_work(&bat_work,
+ msecs_to_jiffies(JITTER_DELAY));
+
+ return 0;
+}
+#else
+#define s3c_adc_battery_suspend NULL
+#define s3c_adc_battery_resume NULL
+#endif
+
+static struct platform_driver s3c_adc_bat_driver = {
+ .driver = {
+ .name = "s3c-adc-battery",
+ },
+ .probe = s3c_adc_bat_probe,
+ .remove = s3c_adc_bat_remove,
+ .suspend = s3c_adc_bat_suspend,
+ .resume = s3c_adc_bat_resume,
+};
+
+static int __init s3c_adc_bat_init(void)
+{
+ return platform_driver_register(&s3c_adc_bat_driver);
+}
+module_init(s3c_adc_bat_init);
+
+static void __exit s3c_adc_bat_exit(void)
+{
+ platform_driver_unregister(&s3c_adc_bat_driver);
+}
+module_exit(s3c_adc_bat_exit);
+
+MODULE_AUTHOR("Vasily Khoruzhick <anarsoul@gmail.com>");
+MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controler driver");
+MODULE_LICENSE("GPL");
static struct work_struct bat_work;
static struct mutex work_lock;
static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
-static struct wm97xx_batt_info *gpdata;
static enum power_supply_property *prop;
static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
struct wm97xx_pdata *wmdata = dev->dev.platform_data;
struct wm97xx_batt_pdata *pdata;
- if (gpdata) {
- dev_err(&dev->dev, "Do not pass platform_data through "
- "wm97xx_bat_set_pdata!\n");
- return -EINVAL;
- }
-
if (!wmdata) {
dev_err(&dev->dev, "No platform data supplied\n");
return -EINVAL;
platform_driver_unregister(&wm97xx_bat_driver);
}
-/* The interface is deprecated, as well as linux/wm97xx_batt.h */
-void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
-
-void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
-{
- gpdata = data;
-}
-EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata);
-
module_init(wm97xx_bat_init);
module_exit(wm97xx_bat_exit);
help
Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
+config REGULATOR_MAX8998
+ tristate "Maxim 8998 voltage regulator"
+ depends on MFD_MAX8998
+ help
+ This driver controls a Maxim 8998 voltage output regulator
+ via I2C bus. The provided regulator is suitable for S3C6410
+ and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
+
config REGULATOR_TWL4030
bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
depends on TWL4030_CORE
help
This driver supports 88PM8607 voltage regulator chips.
+config REGULATOR_ISL6271A
+ tristate "Intersil ISL6271A Power regulator"
+ depends on I2C
+ help
+ This driver supports ISL6271A voltage regulator chip.
+
+config REGULATOR_AD5398
+ tristate "Analog Devices AD5398/AD5821 regulators"
+ depends on I2C
+ help
+ This driver supports AD5398 and AD5821 current regulator chips.
+ If building into module, its name is ad5398.ko.
+
+config REGULATOR_AB8500
+ bool "ST-Ericsson AB8500 Power Regulators"
+ depends on AB8500_CORE
+ help
+ This driver supports the regulators found on the ST-Ericsson mixed
+ signal AB8500 PMIC
+
+config REGULATOR_TPS6586X
+ tristate "TI TPS6586X Power regulators"
+ depends on MFD_TPS6586X
+ help
+ This driver supports TPS6586X voltage regulator chips.
+
endif
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
+obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
obj-$(CONFIG_REGULATOR_DUMMY) += dummy.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
+obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
+obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
+obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *
+ * AB8500 peripheral regulators
+ *
+ * AB8500 supports the following regulators,
+ * LDOs - VAUDIO, VANAMIC2/2, VDIGMIC, VINTCORE12, VTVOUT,
+ * VAUX1/2/3, VANA
+ *
+ * for DB8500 cut 1.0 and previous versions of the silicon, all accesses
+ * to registers are through the DB8500 SPI. In cut 1.1 onwards, these
+ * accesses are through the DB8500 PRCMU I2C
+ *
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ab8500.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/ab8500.h>
+
+/**
+ * struct ab8500_regulator_info - ab8500 regulator information
+ * @desc: regulator description
+ * @ab8500: ab8500 parent
+ * @regulator_dev: regulator device
+ * @max_uV: maximum voltage (for variable voltage supplies)
+ * @min_uV: minimum voltage (for variable voltage supplies)
+ * @fixed_uV: typical voltage (for fixed voltage supplies)
+ * @update_reg: register to control on/off
+ * @mask: mask to enable/disable regulator
+ * @enable: bits to enable the regulator in normal(high power) mode
+ * @voltage_reg: register to control regulator voltage
+ * @voltage_mask: mask to control regulator voltage
+ * @supported_voltages: supported voltage table
+ * @voltages_len: number of supported voltages for the regulator
+ */
+struct ab8500_regulator_info {
+ struct device *dev;
+ struct regulator_desc desc;
+ struct ab8500 *ab8500;
+ struct regulator_dev *regulator;
+ int max_uV;
+ int min_uV;
+ int fixed_uV;
+ int update_reg;
+ int mask;
+ int enable;
+ int voltage_reg;
+ int voltage_mask;
+ int const *supported_voltages;
+ int voltages_len;
+};
+
+/* voltage tables for the vauxn/vintcore supplies */
+static const int ldo_vauxn_voltages[] = {
+ 1100000,
+ 1200000,
+ 1300000,
+ 1400000,
+ 1500000,
+ 1800000,
+ 1850000,
+ 1900000,
+ 2500000,
+ 2650000,
+ 2700000,
+ 2750000,
+ 2800000,
+ 2900000,
+ 3000000,
+ 3300000,
+};
+
+static const int ldo_vintcore_voltages[] = {
+ 1200000,
+ 1225000,
+ 1250000,
+ 1275000,
+ 1300000,
+ 1325000,
+ 1350000,
+};
+
+static int ab8500_regulator_enable(struct regulator_dev *rdev)
+{
+ int regulator_id, ret;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= AB8500_NUM_REGULATORS)
+ return -EINVAL;
+
+ ret = ab8500_set_bits(info->ab8500, info->update_reg,
+ info->mask, info->enable);
+ if (ret < 0)
+ dev_err(rdev_get_dev(rdev),
+ "couldn't set enable bits for regulator\n");
+ return ret;
+}
+
+static int ab8500_regulator_disable(struct regulator_dev *rdev)
+{
+ int regulator_id, ret;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= AB8500_NUM_REGULATORS)
+ return -EINVAL;
+
+ ret = ab8500_set_bits(info->ab8500, info->update_reg,
+ info->mask, 0x0);
+ if (ret < 0)
+ dev_err(rdev_get_dev(rdev),
+ "couldn't set disable bits for regulator\n");
+ return ret;
+}
+
+static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ int regulator_id, ret;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= AB8500_NUM_REGULATORS)
+ return -EINVAL;
+
+ ret = ab8500_read(info->ab8500, info->update_reg);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev),
+ "couldn't read 0x%x register\n", info->update_reg);
+ return ret;
+ }
+
+ if (ret & info->mask)
+ return true;
+ else
+ return false;
+}
+
+static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
+{
+ int regulator_id;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= AB8500_NUM_REGULATORS)
+ return -EINVAL;
+
+ /* return the uV for the fixed regulators */
+ if (info->fixed_uV)
+ return info->fixed_uV;
+
+ if (selector > info->voltages_len)
+ return -EINVAL;
+
+ return info->supported_voltages[selector];
+}
+
+static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
+{
+ int regulator_id, ret, val;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= AB8500_NUM_REGULATORS)
+ return -EINVAL;
+
+ ret = ab8500_read(info->ab8500, info->voltage_reg);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev),
+ "couldn't read voltage reg for regulator\n");
+ return ret;
+ }
+
+ /* vintcore has a different layout */
+ val = ret & info->voltage_mask;
+ if (regulator_id == AB8500_LDO_INTCORE)
+ ret = info->supported_voltages[val >> 0x3];
+ else
+ ret = info->supported_voltages[val];
+
+ return ret;
+}
+
+static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ int i;
+
+ /* check the supported voltage */
+ for (i = 0; i < info->voltages_len; i++) {
+ if ((info->supported_voltages[i] >= min_uV) &&
+ (info->supported_voltages[i] <= max_uV))
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ int regulator_id, ret;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= AB8500_NUM_REGULATORS)
+ return -EINVAL;
+
+ /* get the appropriate voltages within the range */
+ ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev),
+ "couldn't get best voltage for regulator\n");
+ return ret;
+ }
+
+ /* set the registers for the request */
+ ret = ab8500_set_bits(info->ab8500, info->voltage_reg,
+ info->voltage_mask, ret);
+ if (ret < 0)
+ dev_err(rdev_get_dev(rdev),
+ "couldn't set voltage reg for regulator\n");
+
+ return ret;
+}
+
+static struct regulator_ops ab8500_regulator_ops = {
+ .enable = ab8500_regulator_enable,
+ .disable = ab8500_regulator_disable,
+ .is_enabled = ab8500_regulator_is_enabled,
+ .get_voltage = ab8500_regulator_get_voltage,
+ .set_voltage = ab8500_regulator_set_voltage,
+ .list_voltage = ab8500_list_voltage,
+};
+
+static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
+{
+ int regulator_id;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= AB8500_NUM_REGULATORS)
+ return -EINVAL;
+
+ return info->fixed_uV;
+}
+
+static struct regulator_ops ab8500_ldo_fixed_ops = {
+ .enable = ab8500_regulator_enable,
+ .disable = ab8500_regulator_disable,
+ .is_enabled = ab8500_regulator_is_enabled,
+ .get_voltage = ab8500_fixed_get_voltage,
+ .list_voltage = ab8500_list_voltage,
+};
+
+#define AB8500_LDO(_id, min, max, reg, reg_mask, reg_enable, \
+ volt_reg, volt_mask, voltages, \
+ len_volts) \
+{ \
+ .desc = { \
+ .name = "LDO-" #_id, \
+ .ops = &ab8500_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = AB8500_LDO_##_id, \
+ .owner = THIS_MODULE, \
+ }, \
+ .min_uV = (min) * 1000, \
+ .max_uV = (max) * 1000, \
+ .update_reg = reg, \
+ .mask = reg_mask, \
+ .enable = reg_enable, \
+ .voltage_reg = volt_reg, \
+ .voltage_mask = volt_mask, \
+ .supported_voltages = voltages, \
+ .voltages_len = len_volts, \
+ .fixed_uV = 0, \
+}
+
+#define AB8500_FIXED_LDO(_id, fixed, reg, reg_mask, \
+ reg_enable) \
+{ \
+ .desc = { \
+ .name = "LDO-" #_id, \
+ .ops = &ab8500_ldo_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = AB8500_LDO_##_id, \
+ .owner = THIS_MODULE, \
+ }, \
+ .fixed_uV = fixed * 1000, \
+ .update_reg = reg, \
+ .mask = reg_mask, \
+ .enable = reg_enable, \
+}
+
+static struct ab8500_regulator_info ab8500_regulator_info[] = {
+ /*
+ * Variable Voltage LDOs
+ * name, min uV, max uV, ctrl reg, reg mask, enable mask,
+ * volt ctrl reg, volt ctrl mask, volt table, num supported volts
+ */
+ AB8500_LDO(AUX1, 1100, 3300, 0x0409, 0x3, 0x1, 0x041f, 0xf,
+ ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
+ AB8500_LDO(AUX2, 1100, 3300, 0x0409, 0xc, 0x4, 0x0420, 0xf,
+ ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
+ AB8500_LDO(AUX3, 1100, 3300, 0x040a, 0x3, 0x1, 0x0421, 0xf,
+ ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
+ AB8500_LDO(INTCORE, 1100, 3300, 0x0380, 0x4, 0x4, 0x0380, 0x38,
+ ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
+
+ /*
+ * Fixed Voltage LDOs
+ * name, o/p uV, ctrl reg, enable, disable
+ */
+ AB8500_FIXED_LDO(TVOUT, 2000, 0x0380, 0x2, 0x2),
+ AB8500_FIXED_LDO(AUDIO, 2000, 0x0383, 0x2, 0x2),
+ AB8500_FIXED_LDO(ANAMIC1, 2050, 0x0383, 0x4, 0x4),
+ AB8500_FIXED_LDO(ANAMIC2, 2050, 0x0383, 0x8, 0x8),
+ AB8500_FIXED_LDO(DMIC, 1800, 0x0383, 0x10, 0x10),
+ AB8500_FIXED_LDO(ANA, 1200, 0x0383, 0xc, 0x4),
+};
+
+static inline struct ab8500_regulator_info *find_regulator_info(int id)
+{
+ struct ab8500_regulator_info *info;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+ info = &ab8500_regulator_info[i];
+ if (info->desc.id == id)
+ return info;
+ }
+ return NULL;
+}
+
+static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
+{
+ struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
+ struct ab8500_platform_data *pdata = dev_get_platdata(ab8500->dev);
+ int i, err;
+
+ if (!ab8500) {
+ dev_err(&pdev->dev, "null mfd parent\n");
+ return -EINVAL;
+ }
+
+ /* register all regulators */
+ for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+ struct ab8500_regulator_info *info = NULL;
+
+ /* assign per-regulator data */
+ info = &ab8500_regulator_info[i];
+ info->dev = &pdev->dev;
+ info->ab8500 = ab8500;
+
+ info->regulator = regulator_register(&info->desc, &pdev->dev,
+ pdata->regulator[i], info);
+ if (IS_ERR(info->regulator)) {
+ err = PTR_ERR(info->regulator);
+ dev_err(&pdev->dev, "failed to register regulator %s\n",
+ info->desc.name);
+ /* when we fail, un-register all earlier regulators */
+ i--;
+ while (i > 0) {
+ info = &ab8500_regulator_info[i];
+ regulator_unregister(info->regulator);
+ i--;
+ }
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+ struct ab8500_regulator_info *info = NULL;
+ info = &ab8500_regulator_info[i];
+ regulator_unregister(info->regulator);
+ }
+
+ return 0;
+}
+
+static struct platform_driver ab8500_regulator_driver = {
+ .probe = ab8500_regulator_probe,
+ .remove = __devexit_p(ab8500_regulator_remove),
+ .driver = {
+ .name = "ab8500-regulator",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ab8500_regulator_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&ab8500_regulator_driver);
+ if (ret != 0)
+ pr_err("Failed to register ab8500 regulator: %d\n", ret);
+
+ return ret;
+}
+subsys_initcall(ab8500_regulator_init);
+
+static void __exit ab8500_regulator_exit(void)
+{
+ platform_driver_unregister(&ab8500_regulator_driver);
+}
+module_exit(ab8500_regulator_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
+MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
+MODULE_ALIAS("platform:ab8500-regulator");
--- /dev/null
+/*
+ * Voltage and current regulation for AD5398 and AD5821
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define AD5398_CURRENT_EN_MASK 0x8000
+
+struct ad5398_chip_info {
+ struct i2c_client *client;
+ int min_uA;
+ int max_uA;
+ unsigned int current_level;
+ unsigned int current_mask;
+ unsigned int current_offset;
+ struct regulator_dev rdev;
+};
+
+static int ad5398_calc_current(struct ad5398_chip_info *chip,
+ unsigned selector)
+{
+ unsigned range_uA = chip->max_uA - chip->min_uA;
+
+ return chip->min_uA + (selector * range_uA / chip->current_level);
+}
+
+static int ad5398_read_reg(struct i2c_client *client, unsigned short *data)
+{
+ unsigned short val;
+ int ret;
+
+ ret = i2c_master_recv(client, (char *)&val, 2);
+ if (ret < 0) {
+ dev_err(&client->dev, "I2C read error\n");
+ return ret;
+ }
+ *data = be16_to_cpu(val);
+
+ return ret;
+}
+
+static int ad5398_write_reg(struct i2c_client *client, const unsigned short data)
+{
+ unsigned short val;
+ int ret;
+
+ val = cpu_to_be16(data);
+ ret = i2c_master_send(client, (char *)&val, 2);
+ if (ret < 0)
+ dev_err(&client->dev, "I2C write error\n");
+
+ return ret;
+}
+
+static int ad5398_get_current_limit(struct regulator_dev *rdev)
+{
+ struct ad5398_chip_info *chip = rdev_get_drvdata(rdev);
+ struct i2c_client *client = chip->client;
+ unsigned short data;
+ int ret;
+
+ ret = ad5398_read_reg(client, &data);
+ if (ret < 0)
+ return ret;
+
+ ret = (data & chip->current_mask) >> chip->current_offset;
+
+ return ad5398_calc_current(chip, ret);
+}
+
+static int ad5398_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA)
+{
+ struct ad5398_chip_info *chip = rdev_get_drvdata(rdev);
+ struct i2c_client *client = chip->client;
+ unsigned range_uA = chip->max_uA - chip->min_uA;
+ unsigned selector;
+ unsigned short data;
+ int ret;
+
+ if (min_uA > chip->max_uA || min_uA < chip->min_uA)
+ return -EINVAL;
+ if (max_uA > chip->max_uA || max_uA < chip->min_uA)
+ return -EINVAL;
+
+ selector = ((min_uA - chip->min_uA) * chip->current_level +
+ range_uA - 1) / range_uA;
+ if (ad5398_calc_current(chip, selector) > max_uA)
+ return -EINVAL;
+
+ dev_dbg(&client->dev, "changing current %dmA\n",
+ ad5398_calc_current(chip, selector) / 1000);
+
+ /* read chip enable bit */
+ ret = ad5398_read_reg(client, &data);
+ if (ret < 0)
+ return ret;
+
+ /* prepare register data */
+ selector = (selector << chip->current_offset) & chip->current_mask;
+ data = (unsigned short)selector | (data & AD5398_CURRENT_EN_MASK);
+
+ /* write the new current value back as well as enable bit */
+ ret = ad5398_write_reg(client, data);
+
+ return ret;
+}
+
+static int ad5398_is_enabled(struct regulator_dev *rdev)
+{
+ struct ad5398_chip_info *chip = rdev_get_drvdata(rdev);
+ struct i2c_client *client = chip->client;
+ unsigned short data;
+ int ret;
+
+ ret = ad5398_read_reg(client, &data);
+ if (ret < 0)
+ return ret;
+
+ if (data & AD5398_CURRENT_EN_MASK)
+ return 1;
+ else
+ return 0;
+}
+
+static int ad5398_enable(struct regulator_dev *rdev)
+{
+ struct ad5398_chip_info *chip = rdev_get_drvdata(rdev);
+ struct i2c_client *client = chip->client;
+ unsigned short data;
+ int ret;
+
+ ret = ad5398_read_reg(client, &data);
+ if (ret < 0)
+ return ret;
+
+ if (data & AD5398_CURRENT_EN_MASK)
+ return 0;
+
+ data |= AD5398_CURRENT_EN_MASK;
+
+ ret = ad5398_write_reg(client, data);
+
+ return ret;
+}
+
+static int ad5398_disable(struct regulator_dev *rdev)
+{
+ struct ad5398_chip_info *chip = rdev_get_drvdata(rdev);
+ struct i2c_client *client = chip->client;
+ unsigned short data;
+ int ret;
+
+ ret = ad5398_read_reg(client, &data);
+ if (ret < 0)
+ return ret;
+
+ if (!(data & AD5398_CURRENT_EN_MASK))
+ return 0;
+
+ data &= ~AD5398_CURRENT_EN_MASK;
+
+ ret = ad5398_write_reg(client, data);
+
+ return ret;
+}
+
+static struct regulator_ops ad5398_ops = {
+ .get_current_limit = ad5398_get_current_limit,
+ .set_current_limit = ad5398_set_current_limit,
+ .enable = ad5398_enable,
+ .disable = ad5398_disable,
+ .is_enabled = ad5398_is_enabled,
+};
+
+static struct regulator_desc ad5398_reg = {
+ .name = "isink",
+ .id = 0,
+ .ops = &ad5398_ops,
+ .type = REGULATOR_CURRENT,
+ .owner = THIS_MODULE,
+};
+
+struct ad5398_current_data_format {
+ int current_bits;
+ int current_offset;
+ int min_uA;
+ int max_uA;
+};
+
+static const struct ad5398_current_data_format df_10_4_120 = {10, 4, 0, 120000};
+
+static const struct i2c_device_id ad5398_id[] = {
+ { "ad5398", (kernel_ulong_t)&df_10_4_120 },
+ { "ad5821", (kernel_ulong_t)&df_10_4_120 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ad5398_id);
+
+static int __devinit ad5398_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct regulator_dev *rdev;
+ struct regulator_init_data *init_data = client->dev.platform_data;
+ struct ad5398_chip_info *chip;
+ const struct ad5398_current_data_format *df =
+ (struct ad5398_current_data_format *)id->driver_data;
+ int ret;
+
+ if (!init_data)
+ return -EINVAL;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->client = client;
+
+ chip->min_uA = df->min_uA;
+ chip->max_uA = df->max_uA;
+ chip->current_level = 1 << df->current_bits;
+ chip->current_offset = df->current_offset;
+ chip->current_mask = (chip->current_level - 1) << chip->current_offset;
+
+ rdev = regulator_register(&ad5398_reg, &client->dev, init_data, chip);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(&client->dev, "failed to register %s %s\n",
+ id->name, ad5398_reg.name);
+ goto err;
+ }
+
+ i2c_set_clientdata(client, chip);
+ dev_dbg(&client->dev, "%s regulator driver is registered.\n", id->name);
+ return 0;
+
+err:
+ kfree(chip);
+ return ret;
+}
+
+static int __devexit ad5398_remove(struct i2c_client *client)
+{
+ struct ad5398_chip_info *chip = i2c_get_clientdata(client);
+
+ regulator_unregister(&chip->rdev);
+ kfree(chip);
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+static struct i2c_driver ad5398_driver = {
+ .probe = ad5398_probe,
+ .remove = __devexit_p(ad5398_remove),
+ .driver = {
+ .name = "ad5398",
+ },
+ .id_table = ad5398_id,
+};
+
+static int __init ad5398_init(void)
+{
+ return i2c_add_driver(&ad5398_driver);
+}
+subsys_initcall(ad5398_init);
+
+static void __exit ad5398_exit(void)
+{
+ i2c_del_driver(&ad5398_driver);
+}
+module_exit(ad5398_exit);
+
+MODULE_DESCRIPTION("AD5398 and AD5821 current regulator driver");
+MODULE_AUTHOR("Sonic Zhang");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("i2c:ad5398-regulator");
--- /dev/null
+/*
+ * isl6271a-regulator.c
+ *
+ * Support for Intersil ISL6271A voltage regulator
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#define ISL6271A_VOLTAGE_MIN 850000
+#define ISL6271A_VOLTAGE_MAX 1600000
+#define ISL6271A_VOLTAGE_STEP 50000
+
+/* PMIC details */
+struct isl_pmic {
+ struct i2c_client *client;
+ struct regulator_dev *rdev[3];
+ struct mutex mtx;
+};
+
+static int isl6271a_get_voltage(struct regulator_dev *dev)
+{
+ struct isl_pmic *pmic = rdev_get_drvdata(dev);
+ int idx, data;
+
+ mutex_lock(&pmic->mtx);
+
+ idx = i2c_smbus_read_byte(pmic->client);
+ if (idx < 0) {
+ dev_err(&pmic->client->dev, "Error getting voltage\n");
+ data = idx;
+ goto out;
+ }
+
+ /* Convert the data from chip to microvolts */
+ data = ISL6271A_VOLTAGE_MIN + (ISL6271A_VOLTAGE_STEP * (idx & 0xf));
+
+out:
+ mutex_unlock(&pmic->mtx);
+ return data;
+}
+
+static int isl6271a_set_voltage(struct regulator_dev *dev, int minuV, int maxuV)
+{
+ struct isl_pmic *pmic = rdev_get_drvdata(dev);
+ int vsel, err, data;
+
+ if (minuV < ISL6271A_VOLTAGE_MIN || minuV > ISL6271A_VOLTAGE_MAX)
+ return -EINVAL;
+ if (maxuV < ISL6271A_VOLTAGE_MIN || maxuV > ISL6271A_VOLTAGE_MAX)
+ return -EINVAL;
+
+ /* Align to 50000 mV */
+ vsel = minuV - (minuV % ISL6271A_VOLTAGE_STEP);
+
+ /* If the result fell out of [minuV,maxuV] range, put it back */
+ if (vsel < minuV)
+ vsel += ISL6271A_VOLTAGE_STEP;
+
+ /* Convert the microvolts to data for the chip */
+ data = (vsel - ISL6271A_VOLTAGE_MIN) / ISL6271A_VOLTAGE_STEP;
+
+ mutex_lock(&pmic->mtx);
+
+ err = i2c_smbus_write_byte(pmic->client, data);
+ if (err < 0)
+ dev_err(&pmic->client->dev, "Error setting voltage\n");
+
+ mutex_unlock(&pmic->mtx);
+ return err;
+}
+
+static int isl6271a_list_voltage(struct regulator_dev *dev, unsigned selector)
+{
+ return ISL6271A_VOLTAGE_MIN + (ISL6271A_VOLTAGE_STEP * selector);
+}
+
+static struct regulator_ops isl_core_ops = {
+ .get_voltage = isl6271a_get_voltage,
+ .set_voltage = isl6271a_set_voltage,
+ .list_voltage = isl6271a_list_voltage,
+};
+
+static int isl6271a_get_fixed_voltage(struct regulator_dev *dev)
+{
+ int id = rdev_get_id(dev);
+ return (id == 1) ? 1100000 : 1300000;
+}
+
+static int isl6271a_list_fixed_voltage(struct regulator_dev *dev, unsigned selector)
+{
+ int id = rdev_get_id(dev);
+ return (id == 1) ? 1100000 : 1300000;
+}
+
+static struct regulator_ops isl_fixed_ops = {
+ .get_voltage = isl6271a_get_fixed_voltage,
+ .list_voltage = isl6271a_list_fixed_voltage,
+};
+
+static struct regulator_desc isl_rd[] = {
+ {
+ .name = "Core Buck",
+ .id = 0,
+ .n_voltages = 16,
+ .ops = &isl_core_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO1",
+ .id = 1,
+ .n_voltages = 1,
+ .ops = &isl_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO2",
+ .id = 2,
+ .n_voltages = 1,
+ .ops = &isl_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __devinit isl6271a_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct regulator_init_data *init_data = i2c->dev.platform_data;
+ struct isl_pmic *pmic;
+ int err, i;
+
+ if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ if (!init_data) {
+ dev_err(&i2c->dev, "no platform data supplied\n");
+ return -EIO;
+ }
+
+ pmic = kzalloc(sizeof(struct isl_pmic), GFP_KERNEL);
+ if (!pmic)
+ return -ENOMEM;
+
+ pmic->client = i2c;
+
+ mutex_init(&pmic->mtx);
+
+ for (i = 0; i < 3; i++) {
+ pmic->rdev[i] = regulator_register(&isl_rd[0], &i2c->dev,
+ init_data, pmic);
+ if (IS_ERR(pmic->rdev[i])) {
+ dev_err(&i2c->dev, "failed to register %s\n", id->name);
+ err = PTR_ERR(pmic->rdev);
+ goto error;
+ }
+ }
+
+ i2c_set_clientdata(i2c, pmic);
+
+ return 0;
+
+error:
+ while (--i >= 0)
+ regulator_unregister(pmic->rdev[i]);
+
+ kfree(pmic);
+ return err;
+}
+
+static int __devexit isl6271a_remove(struct i2c_client *i2c)
+{
+ struct isl_pmic *pmic = i2c_get_clientdata(i2c);
+ int i;
+
+ i2c_set_clientdata(i2c, NULL);
+
+ for (i = 0; i < 3; i++)
+ regulator_unregister(pmic->rdev[i]);
+
+ kfree(pmic);
+
+ return 0;
+}
+
+static const struct i2c_device_id isl6271a_id[] = {
+ {.name = "isl6271a", 0 },
+ { },
+};
+
+MODULE_DEVICE_TABLE(i2c, isl6271a_id);
+
+static struct i2c_driver isl6271a_i2c_driver = {
+ .driver = {
+ .name = "isl6271a",
+ .owner = THIS_MODULE,
+ },
+ .probe = isl6271a_probe,
+ .remove = __devexit_p(isl6271a_remove),
+ .id_table = isl6271a_id,
+};
+
+static int __init isl6271a_init(void)
+{
+ return i2c_add_driver(&isl6271a_i2c_driver);
+}
+
+static void __exit isl6271a_cleanup(void)
+{
+ i2c_del_driver(&isl6271a_i2c_driver);
+}
+
+subsys_initcall(isl6271a_init);
+module_exit(isl6271a_cleanup);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("Intersil ISL6271A voltage regulator driver");
+MODULE_LICENSE("GPL v2");
if (count != 1)
return -EIO;
ret = i2c_smbus_read_byte_data(i2c, reg);
- if (ret < 0 || count != 1)
+ if (ret < 0)
return -EIO;
*dest = ret;
static int lp3971_i2c_write(struct i2c_client *i2c, char reg, int count,
const u16 *src)
{
- int ret;
-
if (count != 1)
return -EIO;
- ret = i2c_smbus_write_byte_data(i2c, reg, *src);
- if (ret >= 0)
- return 0;
-
- return ret;
+ return i2c_smbus_write_byte_data(i2c, reg, *src);
}
static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg)
}
}
- i2c_set_clientdata(client, rdev);
+ i2c_set_clientdata(client, max1586);
dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
return 0;
static int __devexit max1586_pmic_remove(struct i2c_client *client)
{
- struct regulator_dev **rdev = i2c_get_clientdata(client);
+ struct max1586_data *max1586 = i2c_get_clientdata(client);
int i;
for (i = 0; i <= MAX1586_V6; i++)
- if (rdev[i])
- regulator_unregister(rdev[i]);
- kfree(rdev);
+ if (max1586->rdev[i])
+ regulator_unregister(max1586->rdev[i]);
+ kfree(max1586);
return 0;
}
}
}
- i2c_set_clientdata(client, rdev);
+ i2c_set_clientdata(client, max8660);
dev_info(&client->dev, "Maxim 8660/8661 regulator driver loaded\n");
return 0;
static int __devexit max8660_remove(struct i2c_client *client)
{
- struct regulator_dev **rdev = i2c_get_clientdata(client);
+ struct max8660 *max8660 = i2c_get_clientdata(client);
int i;
for (i = 0; i < MAX8660_V_END; i++)
- if (rdev[i])
- regulator_unregister(rdev[i]);
- kfree(rdev);
+ if (max8660->rdev[i])
+ regulator_unregister(max8660->rdev[i]);
+ kfree(max8660);
return 0;
}
--- /dev/null
+/*
+ * max8998.c - Voltage regulator driver for the Maxim 8998
+ *
+ * Copyright (C) 2009-2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/max8998.h>
+#include <linux/mfd/max8998-private.h>
+
+struct max8998_data {
+ struct device *dev;
+ struct max8998_dev *iodev;
+ int num_regulators;
+ struct regulator_dev **rdev;
+};
+
+struct voltage_map_desc {
+ int min;
+ int max;
+ int step;
+};
+
+/* Voltage maps */
+static const struct voltage_map_desc ldo23_voltage_map_desc = {
+ .min = 800, .step = 50, .max = 1300,
+};
+static const struct voltage_map_desc ldo456711_voltage_map_desc = {
+ .min = 1600, .step = 100, .max = 3600,
+};
+static const struct voltage_map_desc ldo8_voltage_map_desc = {
+ .min = 3000, .step = 100, .max = 3600,
+};
+static const struct voltage_map_desc ldo9_voltage_map_desc = {
+ .min = 2800, .step = 100, .max = 3100,
+};
+static const struct voltage_map_desc ldo10_voltage_map_desc = {
+ .min = 950, .step = 50, .max = 1300,
+};
+static const struct voltage_map_desc ldo1213_voltage_map_desc = {
+ .min = 800, .step = 100, .max = 3300,
+};
+static const struct voltage_map_desc ldo1415_voltage_map_desc = {
+ .min = 1200, .step = 100, .max = 3300,
+};
+static const struct voltage_map_desc ldo1617_voltage_map_desc = {
+ .min = 1600, .step = 100, .max = 3600,
+};
+static const struct voltage_map_desc buck12_voltage_map_desc = {
+ .min = 750, .step = 25, .max = 1525,
+};
+static const struct voltage_map_desc buck3_voltage_map_desc = {
+ .min = 1600, .step = 100, .max = 3600,
+};
+static const struct voltage_map_desc buck4_voltage_map_desc = {
+ .min = 800, .step = 100, .max = 2300,
+};
+
+static const struct voltage_map_desc *ldo_voltage_map[] = {
+ NULL,
+ NULL,
+ &ldo23_voltage_map_desc, /* LDO2 */
+ &ldo23_voltage_map_desc, /* LDO3 */
+ &ldo456711_voltage_map_desc, /* LDO4 */
+ &ldo456711_voltage_map_desc, /* LDO5 */
+ &ldo456711_voltage_map_desc, /* LDO6 */
+ &ldo456711_voltage_map_desc, /* LDO7 */
+ &ldo8_voltage_map_desc, /* LDO8 */
+ &ldo9_voltage_map_desc, /* LDO9 */
+ &ldo10_voltage_map_desc, /* LDO10 */
+ &ldo456711_voltage_map_desc, /* LDO11 */
+ &ldo1213_voltage_map_desc, /* LDO12 */
+ &ldo1213_voltage_map_desc, /* LDO13 */
+ &ldo1415_voltage_map_desc, /* LDO14 */
+ &ldo1415_voltage_map_desc, /* LDO15 */
+ &ldo1617_voltage_map_desc, /* LDO16 */
+ &ldo1617_voltage_map_desc, /* LDO17 */
+ &buck12_voltage_map_desc, /* BUCK1 */
+ &buck12_voltage_map_desc, /* BUCK2 */
+ &buck3_voltage_map_desc, /* BUCK3 */
+ &buck4_voltage_map_desc, /* BUCK4 */
+};
+
+static inline int max8998_get_ldo(struct regulator_dev *rdev)
+{
+ return rdev_get_id(rdev);
+}
+
+static int max8998_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ const struct voltage_map_desc *desc;
+ int ldo = max8998_get_ldo(rdev);
+ int val;
+
+ if (ldo >= ARRAY_SIZE(ldo_voltage_map))
+ return -EINVAL;
+
+ desc = ldo_voltage_map[ldo];
+ if (desc == NULL)
+ return -EINVAL;
+
+ val = desc->min + desc->step * selector;
+ if (val > desc->max)
+ return -EINVAL;
+
+ return val * 1000;
+}
+
+static int max8998_get_enable_register(struct regulator_dev *rdev,
+ int *reg, int *shift)
+{
+ int ldo = max8998_get_ldo(rdev);
+
+ switch (ldo) {
+ case MAX8998_LDO2 ... MAX8998_LDO5:
+ *reg = MAX8998_REG_ONOFF1;
+ *shift = 3 - (ldo - MAX8998_LDO2);
+ break;
+ case MAX8998_LDO6 ... MAX8998_LDO13:
+ *reg = MAX8998_REG_ONOFF2;
+ *shift = 7 - (ldo - MAX8998_LDO6);
+ break;
+ case MAX8998_LDO14 ... MAX8998_LDO17:
+ *reg = MAX8998_REG_ONOFF3;
+ *shift = 7 - (ldo - MAX8998_LDO14);
+ break;
+ case MAX8998_BUCK1 ... MAX8998_BUCK4:
+ *reg = MAX8998_REG_ONOFF1;
+ *shift = 7 - (ldo - MAX8998_BUCK1);
+ break;
+ case MAX8998_EN32KHZ_AP ... MAX8998_ENVICHG:
+ *reg = MAX8998_REG_ONOFF4;
+ *shift = 7 - (ldo - MAX8998_EN32KHZ_AP);
+ break;
+ case MAX8998_ESAFEOUT1 ... MAX8998_ESAFEOUT2:
+ *reg = MAX8998_REG_CHGR2;
+ *shift = 7 - (ldo - MAX8998_ESAFEOUT1);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int max8998_ldo_is_enabled(struct regulator_dev *rdev)
+{
+ struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+ int ret, reg, shift = 8;
+ u8 val;
+
+ ret = max8998_get_enable_register(rdev, ®, &shift);
+ if (ret)
+ return ret;
+
+ ret = max8998_read_reg(max8998->iodev, reg, &val);
+ if (ret)
+ return ret;
+
+ return val & (1 << shift);
+}
+
+static int max8998_ldo_enable(struct regulator_dev *rdev)
+{
+ struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+ int reg, shift = 8, ret;
+
+ ret = max8998_get_enable_register(rdev, ®, &shift);
+ if (ret)
+ return ret;
+
+ return max8998_update_reg(max8998->iodev, reg, 1<<shift, 1<<shift);
+}
+
+static int max8998_ldo_disable(struct regulator_dev *rdev)
+{
+ struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+ int reg, shift = 8, ret;
+
+ ret = max8998_get_enable_register(rdev, ®, &shift);
+ if (ret)
+ return ret;
+
+ return max8998_update_reg(max8998->iodev, reg, 0, 1<<shift);
+}
+
+static int max8998_get_voltage_register(struct regulator_dev *rdev,
+ int *_reg, int *_shift, int *_mask)
+{
+ int ldo = max8998_get_ldo(rdev);
+ int reg, shift = 0, mask = 0xff;
+
+ switch (ldo) {
+ case MAX8998_LDO2 ... MAX8998_LDO3:
+ reg = MAX8998_REG_LDO2_LDO3;
+ mask = 0xf;
+ if (ldo == MAX8998_LDO2)
+ shift = 4;
+ else
+ shift = 0;
+ break;
+ case MAX8998_LDO4 ... MAX8998_LDO7:
+ reg = MAX8998_REG_LDO4 + (ldo - MAX8998_LDO4);
+ break;
+ case MAX8998_LDO8 ... MAX8998_LDO9:
+ reg = MAX8998_REG_LDO8_LDO9;
+ mask = 0xf;
+ if (ldo == MAX8998_LDO8)
+ shift = 4;
+ else
+ shift = 0;
+ break;
+ case MAX8998_LDO10 ... MAX8998_LDO11:
+ reg = MAX8998_REG_LDO10_LDO11;
+ if (ldo == MAX8998_LDO10) {
+ shift = 5;
+ mask = 0x7;
+ } else {
+ shift = 0;
+ mask = 0x1f;
+ }
+ break;
+ case MAX8998_LDO12 ... MAX8998_LDO17:
+ reg = MAX8998_REG_LDO12 + (ldo - MAX8998_LDO12);
+ break;
+ case MAX8998_BUCK1:
+ reg = MAX8998_REG_BUCK1_DVSARM1;
+ break;
+ case MAX8998_BUCK2:
+ reg = MAX8998_REG_BUCK2_DVSINT1;
+ break;
+ case MAX8998_BUCK3:
+ reg = MAX8998_REG_BUCK3;
+ break;
+ case MAX8998_BUCK4:
+ reg = MAX8998_REG_BUCK4;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *_reg = reg;
+ *_shift = shift;
+ *_mask = mask;
+
+ return 0;
+}
+
+static int max8998_get_voltage(struct regulator_dev *rdev)
+{
+ struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+ int reg, shift = 0, mask, ret;
+ u8 val;
+
+ ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
+ if (ret)
+ return ret;
+
+ ret = max8998_read_reg(max8998->iodev, reg, &val);
+ if (ret)
+ return ret;
+
+ val >>= shift;
+ val &= mask;
+
+ return max8998_list_voltage(rdev, val);
+}
+
+static int max8998_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+ int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
+ int previous_vol = 0;
+ const struct voltage_map_desc *desc;
+ int ldo = max8998_get_ldo(rdev);
+ int reg, shift = 0, mask, ret;
+ int i = 0;
+ u8 val;
+ bool en_ramp = false;
+
+ if (ldo >= ARRAY_SIZE(ldo_voltage_map))
+ return -EINVAL;
+
+ desc = ldo_voltage_map[ldo];
+ if (desc == NULL)
+ return -EINVAL;
+
+ if (max_vol < desc->min || min_vol > desc->max)
+ return -EINVAL;
+
+ while (desc->min + desc->step*i < min_vol &&
+ desc->min + desc->step*i < desc->max)
+ i++;
+
+ if (desc->min + desc->step*i > max_vol)
+ return -EINVAL;
+
+ ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
+ if (ret)
+ return ret;
+
+ /* wait for RAMP_UP_DELAY if rdev is BUCK1/2 and
+ * ENRAMP is ON */
+ if (ldo == MAX8998_BUCK1 || ldo == MAX8998_BUCK2) {
+ max8998_read_reg(max8998->iodev, MAX8998_REG_ONOFF4, &val);
+ if (val & (1 << 4)) {
+ en_ramp = true;
+ previous_vol = max8998_get_voltage(rdev);
+ }
+ }
+
+ ret = max8998_update_reg(max8998->iodev, reg, i<<shift, mask<<shift);
+
+ if (en_ramp == true) {
+ int difference = desc->min + desc->step*i - previous_vol/1000;
+ if (difference > 0)
+ udelay(difference / ((val & 0x0f) + 1));
+ }
+
+ return ret;
+}
+
+static struct regulator_ops max8998_ldo_ops = {
+ .list_voltage = max8998_list_voltage,
+ .is_enabled = max8998_ldo_is_enabled,
+ .enable = max8998_ldo_enable,
+ .disable = max8998_ldo_disable,
+ .get_voltage = max8998_get_voltage,
+ .set_voltage = max8998_set_voltage,
+ .set_suspend_enable = max8998_ldo_enable,
+ .set_suspend_disable = max8998_ldo_disable,
+};
+
+static struct regulator_ops max8998_buck_ops = {
+ .list_voltage = max8998_list_voltage,
+ .is_enabled = max8998_ldo_is_enabled,
+ .enable = max8998_ldo_enable,
+ .disable = max8998_ldo_disable,
+ .get_voltage = max8998_get_voltage,
+ .set_voltage = max8998_set_voltage,
+ .set_suspend_enable = max8998_ldo_enable,
+ .set_suspend_disable = max8998_ldo_disable,
+};
+
+static struct regulator_ops max8998_others_ops = {
+ .is_enabled = max8998_ldo_is_enabled,
+ .enable = max8998_ldo_enable,
+ .disable = max8998_ldo_disable,
+ .set_suspend_enable = max8998_ldo_enable,
+ .set_suspend_disable = max8998_ldo_disable,
+};
+
+static struct regulator_desc regulators[] = {
+ {
+ .name = "LDO2",
+ .id = MAX8998_LDO2,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO3",
+ .id = MAX8998_LDO3,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO4",
+ .id = MAX8998_LDO4,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO5",
+ .id = MAX8998_LDO5,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO6",
+ .id = MAX8998_LDO6,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO7",
+ .id = MAX8998_LDO7,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO8",
+ .id = MAX8998_LDO8,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO9",
+ .id = MAX8998_LDO9,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO10",
+ .id = MAX8998_LDO10,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO11",
+ .id = MAX8998_LDO11,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO12",
+ .id = MAX8998_LDO12,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO13",
+ .id = MAX8998_LDO13,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO14",
+ .id = MAX8998_LDO14,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO15",
+ .id = MAX8998_LDO15,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO16",
+ .id = MAX8998_LDO16,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO17",
+ .id = MAX8998_LDO17,
+ .ops = &max8998_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "BUCK1",
+ .id = MAX8998_BUCK1,
+ .ops = &max8998_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "BUCK2",
+ .id = MAX8998_BUCK2,
+ .ops = &max8998_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "BUCK3",
+ .id = MAX8998_BUCK3,
+ .ops = &max8998_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "BUCK4",
+ .id = MAX8998_BUCK4,
+ .ops = &max8998_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "EN32KHz AP",
+ .id = MAX8998_EN32KHZ_AP,
+ .ops = &max8998_others_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "EN32KHz CP",
+ .id = MAX8998_EN32KHZ_CP,
+ .ops = &max8998_others_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "ENVICHG",
+ .id = MAX8998_ENVICHG,
+ .ops = &max8998_others_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "ESAFEOUT1",
+ .id = MAX8998_ESAFEOUT1,
+ .ops = &max8998_others_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "ESAFEOUT2",
+ .id = MAX8998_ESAFEOUT2,
+ .ops = &max8998_others_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ }
+};
+
+static __devinit int max8998_pmic_probe(struct platform_device *pdev)
+{
+ struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct regulator_dev **rdev;
+ struct max8998_data *max8998;
+ int i, ret, size;
+
+ if (!pdata) {
+ dev_err(pdev->dev.parent, "No platform init data supplied\n");
+ return -ENODEV;
+ }
+
+ max8998 = kzalloc(sizeof(struct max8998_data), GFP_KERNEL);
+ if (!max8998)
+ return -ENOMEM;
+
+ size = sizeof(struct regulator_dev *) * (pdata->num_regulators + 1);
+ max8998->rdev = kzalloc(size, GFP_KERNEL);
+ if (!max8998->rdev) {
+ kfree(max8998);
+ return -ENOMEM;
+ }
+
+ rdev = max8998->rdev;
+ max8998->iodev = iodev;
+ platform_set_drvdata(pdev, max8998);
+
+ for (i = 0; i < pdata->num_regulators; i++) {
+ const struct voltage_map_desc *desc;
+ int id = pdata->regulators[i].id;
+ int index = id - MAX8998_LDO2;
+
+ desc = ldo_voltage_map[id];
+ if (desc && regulators[index].ops != &max8998_others_ops) {
+ int count = (desc->max - desc->min) / desc->step + 1;
+ regulators[index].n_voltages = count;
+ }
+ rdev[i] = regulator_register(®ulators[index], max8998->dev,
+ pdata->regulators[i].initdata, max8998);
+ if (IS_ERR(rdev[i])) {
+ ret = PTR_ERR(rdev[i]);
+ dev_err(max8998->dev, "regulator init failed\n");
+ rdev[i] = NULL;
+ goto err;
+ }
+ }
+
+
+ return 0;
+err:
+ for (i = 0; i <= max8998->num_regulators; i++)
+ if (rdev[i])
+ regulator_unregister(rdev[i]);
+
+ kfree(max8998->rdev);
+ kfree(max8998);
+
+ return ret;
+}
+
+static int __devexit max8998_pmic_remove(struct platform_device *pdev)
+{
+ struct max8998_data *max8998 = platform_get_drvdata(pdev);
+ struct regulator_dev **rdev = max8998->rdev;
+ int i;
+
+ for (i = 0; i <= max8998->num_regulators; i++)
+ if (rdev[i])
+ regulator_unregister(rdev[i]);
+
+ kfree(max8998->rdev);
+ kfree(max8998);
+
+ return 0;
+}
+
+static struct platform_driver max8998_pmic_driver = {
+ .driver = {
+ .name = "max8998-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = max8998_pmic_probe,
+ .remove = __devexit_p(max8998_pmic_remove),
+};
+
+static int __init max8998_pmic_init(void)
+{
+ return platform_driver_register(&max8998_pmic_driver);
+}
+subsys_initcall(max8998_pmic_init);
+
+static void __exit max8998_pmic_cleanup(void)
+{
+ platform_driver_unregister(&max8998_pmic_driver);
+}
+module_exit(max8998_pmic_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 8998 voltage regulator driver");
+MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
+MODULE_LICENSE("GPL");
static const struct i2c_device_id tps_65023_id[] = {
{.name = "tps65023",
.driver_data = (unsigned long) tps65023_regs,},
+ {.name = "tps65021",
+ .driver_data = (unsigned long) tps65023_regs,},
{ },
};
}
tps6507x_dev->pmic = tps;
+ platform_set_drvdata(pdev, tps6507x_dev);
return 0;
--- /dev/null
+/*
+ * Regulator driver for TI TPS6586x
+ *
+ * Copyright (C) 2010 Compulab Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on da903x
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * Copyright (C) 2008 Compulab Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/tps6586x.h>
+
+/* supply control and voltage setting */
+#define TPS6586X_SUPPLYENA 0x10
+#define TPS6586X_SUPPLYENB 0x11
+#define TPS6586X_SUPPLYENC 0x12
+#define TPS6586X_SUPPLYEND 0x13
+#define TPS6586X_SUPPLYENE 0x14
+#define TPS6586X_VCC1 0x20
+#define TPS6586X_VCC2 0x21
+#define TPS6586X_SM1V1 0x23
+#define TPS6586X_SM1V2 0x24
+#define TPS6586X_SM1SL 0x25
+#define TPS6586X_SM0V1 0x26
+#define TPS6586X_SM0V2 0x27
+#define TPS6586X_SM0SL 0x28
+#define TPS6586X_LDO2AV1 0x29
+#define TPS6586X_LDO2AV2 0x2A
+#define TPS6586X_LDO2BV1 0x2F
+#define TPS6586X_LDO2BV2 0x30
+#define TPS6586X_LDO4V1 0x32
+#define TPS6586X_LDO4V2 0x33
+
+/* converter settings */
+#define TPS6586X_SUPPLYV1 0x41
+#define TPS6586X_SUPPLYV2 0x42
+#define TPS6586X_SUPPLYV3 0x43
+#define TPS6586X_SUPPLYV4 0x44
+#define TPS6586X_SUPPLYV5 0x45
+#define TPS6586X_SUPPLYV6 0x46
+#define TPS6586X_SMODE1 0x47
+#define TPS6586X_SMODE2 0x48
+
+struct tps6586x_regulator {
+ struct regulator_desc desc;
+
+ int volt_reg;
+ int volt_shift;
+ int volt_nbits;
+ int enable_bit[2];
+ int enable_reg[2];
+
+ int *voltages;
+
+ /* for DVM regulators */
+ int go_reg;
+ int go_bit;
+};
+
+static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
+{
+ return rdev_get_dev(rdev)->parent->parent;
+}
+
+static int tps6586x_ldo_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct tps6586x_regulator *info = rdev_get_drvdata(rdev);
+
+ return info->voltages[selector] * 1000;
+}
+
+
+static int __tps6586x_ldo_set_voltage(struct device *parent,
+ struct tps6586x_regulator *ri,
+ int min_uV, int max_uV)
+{
+ int val, uV;
+ uint8_t mask;
+
+ for (val = 0; val < ri->desc.n_voltages; val++) {
+ uV = ri->voltages[val] * 1000;
+
+ /* LDO0 has minimal voltage 1.2 rather than 1.25 */
+ if (ri->desc.id == TPS6586X_ID_LDO_0 && val == 0)
+ uV -= 50 * 1000;
+
+ /* use the first in-range value */
+ if (min_uV <= uV && uV <= max_uV) {
+
+ val <<= ri->volt_shift;
+ mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
+
+ return tps6586x_update(parent, ri->volt_reg, val, mask);
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int tps6586x_ldo_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+ struct device *parent = to_tps6586x_dev(rdev);
+
+ return __tps6586x_ldo_set_voltage(parent, ri, min_uV, max_uV);
+}
+
+static int tps6586x_ldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+ struct device *parent = to_tps6586x_dev(rdev);
+ uint8_t val, mask;
+ int ret;
+
+ ret = tps6586x_read(parent, ri->volt_reg, &val);
+ if (ret)
+ return ret;
+
+ mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
+ val = (val & mask) >> ri->volt_shift;
+
+ if (val > ri->desc.n_voltages)
+ BUG();
+
+ return ri->voltages[val] * 1000;
+}
+
+static int tps6586x_dvm_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+ struct device *parent = to_tps6586x_dev(rdev);
+ int ret;
+
+ ret = __tps6586x_ldo_set_voltage(parent, ri, min_uV, max_uV);
+ if (ret)
+ return ret;
+
+ return tps6586x_set_bits(parent, ri->go_reg, ri->go_bit);
+}
+
+static int tps6586x_regulator_enable(struct regulator_dev *rdev)
+{
+ struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+ struct device *parent = to_tps6586x_dev(rdev);
+
+ return tps6586x_set_bits(parent, ri->enable_reg[0],
+ 1 << ri->enable_bit[0]);
+}
+
+static int tps6586x_regulator_disable(struct regulator_dev *rdev)
+{
+ struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+ struct device *parent = to_tps6586x_dev(rdev);
+
+ return tps6586x_clr_bits(parent, ri->enable_reg[0],
+ 1 << ri->enable_bit[0]);
+}
+
+static int tps6586x_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+ struct device *parent = to_tps6586x_dev(rdev);
+ uint8_t reg_val;
+ int ret;
+
+ ret = tps6586x_read(parent, ri->enable_reg[0], ®_val);
+ if (ret)
+ return ret;
+
+ return !!(reg_val & (1 << ri->enable_bit[0]));
+}
+
+static struct regulator_ops tps6586x_regulator_ldo_ops = {
+ .list_voltage = tps6586x_ldo_list_voltage,
+ .get_voltage = tps6586x_ldo_get_voltage,
+ .set_voltage = tps6586x_ldo_set_voltage,
+
+ .is_enabled = tps6586x_regulator_is_enabled,
+ .enable = tps6586x_regulator_enable,
+ .disable = tps6586x_regulator_disable,
+};
+
+static struct regulator_ops tps6586x_regulator_dvm_ops = {
+ .list_voltage = tps6586x_ldo_list_voltage,
+ .get_voltage = tps6586x_ldo_get_voltage,
+ .set_voltage = tps6586x_dvm_set_voltage,
+
+ .is_enabled = tps6586x_regulator_is_enabled,
+ .enable = tps6586x_regulator_enable,
+ .disable = tps6586x_regulator_disable,
+};
+
+static int tps6586x_ldo_voltages[] = {
+ 1250, 1500, 1800, 2500, 2700, 2850, 3100, 3300,
+};
+
+static int tps6586x_ldo4_voltages[] = {
+ 1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875,
+ 1900, 1925, 1950, 1975, 2000, 2025, 2050, 2075,
+ 2100, 2125, 2150, 2175, 2200, 2225, 2250, 2275,
+ 2300, 2325, 2350, 2375, 2400, 2425, 2450, 2475,
+};
+
+static int tps6586x_sm2_voltages[] = {
+ 3000, 3050, 3100, 3150, 3200, 3250, 3300, 3350,
+ 3400, 3450, 3500, 3550, 3600, 3650, 3700, 3750,
+ 3800, 3850, 3900, 3950, 4000, 4050, 4100, 4150,
+ 4200, 4250, 4300, 4350, 4400, 4450, 4500, 4550,
+};
+
+static int tps6586x_dvm_voltages[] = {
+ 725, 750, 775, 800, 825, 850, 875, 900,
+ 925, 950, 975, 1000, 1025, 1050, 1075, 1100,
+ 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
+ 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
+};
+
+#define TPS6586X_REGULATOR(_id, vdata, _ops, vreg, shift, nbits, \
+ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
+{ \
+ .desc = { \
+ .name = "REG-" #_id, \
+ .ops = &tps6586x_regulator_##_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = TPS6586X_ID_##_id, \
+ .n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages), \
+ .owner = THIS_MODULE, \
+ }, \
+ .volt_reg = TPS6586X_##vreg, \
+ .volt_shift = (shift), \
+ .volt_nbits = (nbits), \
+ .enable_reg[0] = TPS6586X_SUPPLY##ereg0, \
+ .enable_bit[0] = (ebit0), \
+ .enable_reg[1] = TPS6586X_SUPPLY##ereg1, \
+ .enable_bit[1] = (ebit1), \
+ .voltages = tps6586x_##vdata##_voltages, \
+}
+
+#define TPS6586X_LDO(_id, vdata, vreg, shift, nbits, \
+ ereg0, ebit0, ereg1, ebit1) \
+ TPS6586X_REGULATOR(_id, vdata, ldo_ops, vreg, shift, nbits, \
+ ereg0, ebit0, ereg1, ebit1, 0, 0)
+
+#define TPS6586X_DVM(_id, vdata, vreg, shift, nbits, \
+ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
+ TPS6586X_REGULATOR(_id, vdata, dvm_ops, vreg, shift, nbits, \
+ ereg0, ebit0, ereg1, ebit1, goreg, gobit)
+
+static struct tps6586x_regulator tps6586x_regulator[] = {
+ TPS6586X_LDO(LDO_0, ldo, SUPPLYV1, 5, 3, ENC, 0, END, 0),
+ TPS6586X_LDO(LDO_3, ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
+ TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
+ TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
+ TPS6586X_LDO(LDO_7, ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
+ TPS6586X_LDO(LDO_8, ldo, SUPPLYV1, 5, 3, ENC, 6, END, 6),
+ TPS6586X_LDO(LDO_9, ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
+ TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, ENE, 7, ENE, 7),
+ TPS6586X_LDO(LDO_1, dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
+ TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 1, END, 1),
+
+ TPS6586X_DVM(LDO_2, dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6),
+ TPS6586X_DVM(LDO_4, ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6),
+ TPS6586X_DVM(SM_0, dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2),
+ TPS6586X_DVM(SM_1, dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0),
+};
+
+/*
+ * TPS6586X has 2 enable bits that are OR'ed to determine the actual
+ * regulator state. Clearing one of this bits allows switching
+ * regulator on and of with single register write.
+ */
+static inline int tps6586x_regulator_preinit(struct device *parent,
+ struct tps6586x_regulator *ri)
+{
+ uint8_t val1, val2;
+ int ret;
+
+ ret = tps6586x_read(parent, ri->enable_reg[0], &val1);
+ if (ret)
+ return ret;
+
+ ret = tps6586x_read(parent, ri->enable_reg[1], &val2);
+ if (ret)
+ return ret;
+
+ if (!(val2 & ri->enable_bit[1]))
+ return 0;
+
+ /*
+ * The regulator is on, but it's enabled with the bit we don't
+ * want to use, so we switch the enable bits
+ */
+ if (!(val1 & ri->enable_bit[0])) {
+ ret = tps6586x_set_bits(parent, ri->enable_reg[0],
+ 1 << ri->enable_bit[0]);
+ if (ret)
+ return ret;
+ }
+
+ return tps6586x_clr_bits(parent, ri->enable_reg[1],
+ 1 << ri->enable_bit[1]);
+}
+
+static inline struct tps6586x_regulator *find_regulator_info(int id)
+{
+ struct tps6586x_regulator *ri;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(tps6586x_regulator); i++) {
+ ri = &tps6586x_regulator[i];
+ if (ri->desc.id == id)
+ return ri;
+ }
+ return NULL;
+}
+
+static int __devinit tps6586x_regulator_probe(struct platform_device *pdev)
+{
+ struct tps6586x_regulator *ri = NULL;
+ struct regulator_dev *rdev;
+ int id = pdev->id;
+ int err;
+
+ dev_dbg(&pdev->dev, "Probing reulator %d\n", id);
+
+ ri = find_regulator_info(id);
+ if (ri == NULL) {
+ dev_err(&pdev->dev, "invalid regulator ID specified\n");
+ return -EINVAL;
+ }
+
+ err = tps6586x_regulator_preinit(pdev->dev.parent, ri);
+ if (err)
+ return err;
+
+ rdev = regulator_register(&ri->desc, &pdev->dev,
+ pdev->dev.platform_data, ri);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register regulator %s\n",
+ ri->desc.name);
+ return PTR_ERR(rdev);
+ }
+
+ platform_set_drvdata(pdev, rdev);
+
+ return 0;
+}
+
+static int __devexit tps6586x_regulator_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+ regulator_unregister(rdev);
+ return 0;
+}
+
+static struct platform_driver tps6586x_regulator_driver = {
+ .driver = {
+ .name = "tps6586x-regulator",
+ .owner = THIS_MODULE,
+ },
+ .probe = tps6586x_regulator_probe,
+ .remove = __devexit_p(tps6586x_regulator_remove),
+};
+
+static int __init tps6586x_regulator_init(void)
+{
+ return platform_driver_register(&tps6586x_regulator_driver);
+}
+subsys_initcall(tps6586x_regulator_init);
+
+static void __exit tps6586x_regulator_exit(void)
+{
+ platform_driver_unregister(&tps6586x_regulator_driver);
+}
+module_exit(tps6586x_regulator_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("Regulator Driver for TI TPS6586X PMIC");
+MODULE_ALIAS("platform:tps6586x-regulator");
ldo->wm8994 = wm8994;
- ldo->is_enabled = true;
-
if (pdata->ldo[id].enable && gpio_is_valid(pdata->ldo[id].enable)) {
ldo->enable = pdata->ldo[id].enable;
ret);
goto err_gpio;
}
- }
+ } else
+ ldo->is_enabled = true;
ldo->regulator = regulator_register(&wm8994_ldo_desc[id], &pdev->dev,
pdata->ldo[id].init_data, ldo);
This driver can also be built as a module. If so, the module
will be called rtc-ds1672.
+config RTC_DRV_DS3232
+ tristate "Dallas/Maxim DS3232"
+ depends on RTC_CLASS && I2C
+ help
+ If you say yes here you get support for Dallas Semiconductor
+ DS3232 real-time clock chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds3232.
+
config RTC_DRV_MAX6900
tristate "Maxim MAX6900"
help
This driver can also be built as a module. If so, the module
will be called rtc-isl1208.
+config RTC_DRV_ISL12022
+ tristate "Intersil ISL12022"
+ help
+ If you say yes here you get support for the
+ Intersil ISL12022 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-isl12022.
+
config RTC_DRV_X1205
tristate "Xicor/Intersil X1205"
help
This driver can also be built as a module. If so, the module
will be called rtc-msm6242.
+config RTC_DRV_IMXDI
+ tristate "Freescale IMX DryIce Real Time Clock"
+ depends on ARCH_MX25
+ depends on RTC_CLASS
+ help
+ Support for Freescale IMX DryIce RTC
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-imxdi".
+
config RTC_MXC
tristate "Freescale MXC Real Time Clock"
depends on ARCH_MXC
DA8xx/OMAP-L13x chips. This driver can also be built as a
module called rtc-omap.
+config HAVE_S3C_RTC
+ bool
+ help
+ This will include RTC support for Samsung SoCs. If
+ you want to include RTC support for any machine, kindly
+ select this in the respective mach-XXXX/Kconfig file.
+
config RTC_DRV_S3C
tristate "Samsung S3C series SoC RTC"
- depends on ARCH_S3C2410 || ARCH_S3C64XX
+ depends on ARCH_S3C2410 || ARCH_S3C64XX || HAVE_S3C_RTC
help
RTC (Realtime Clock) driver for the clock inbuilt into the
Samsung S3C24XX series of SoCs. This can provide periodic
obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o
obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
+obj-$(CONFIG_RTC_DRV_DS3232) += rtc-ds3232.o
obj-$(CONFIG_RTC_DRV_DS3234) += rtc-ds3234.o
obj-$(CONFIG_RTC_DRV_EFI) += rtc-efi.o
obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o
obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o
obj-$(CONFIG_RTC_DRV_GENERIC) += rtc-generic.o
+obj-$(CONFIG_RTC_DRV_IMXDI) += rtc-imxdi.o
obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
+obj-$(CONFIG_RTC_DRV_ISL12022) += rtc-isl12022.o
obj-$(CONFIG_RTC_DRV_JZ4740) += rtc-jz4740.o
obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o
obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o
#include <linux/acpi.h>
-#ifdef CONFIG_PM
static u32 rtc_handler(void *context)
{
acpi_clear_event(ACPI_EVENT_RTC);
{
acpi_disable_event(ACPI_EVENT_RTC, 0);
}
-#else
-#define rtc_wake_setup() do{}while(0)
-#define rtc_wake_on NULL
-#define rtc_wake_off NULL
-#endif
/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find
* its device node and pass extra config data. This helps its driver use
--- /dev/null
+/*
+ * RTC client/driver for the Maxim/Dallas DS3232 Real-Time Clock over I2C
+ *
+ * Copyright (C) 2009-2010 Freescale Semiconductor.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+/*
+ * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
+ * recommened in .../Documentation/i2c/writing-clients section
+ * "Sending and receiving", using SMBus level communication is preferred.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define DS3232_REG_SECONDS 0x00
+#define DS3232_REG_MINUTES 0x01
+#define DS3232_REG_HOURS 0x02
+#define DS3232_REG_AMPM 0x02
+#define DS3232_REG_DAY 0x03
+#define DS3232_REG_DATE 0x04
+#define DS3232_REG_MONTH 0x05
+#define DS3232_REG_CENTURY 0x05
+#define DS3232_REG_YEAR 0x06
+#define DS3232_REG_ALARM1 0x07 /* Alarm 1 BASE */
+#define DS3232_REG_ALARM2 0x0B /* Alarm 2 BASE */
+#define DS3232_REG_CR 0x0E /* Control register */
+# define DS3232_REG_CR_nEOSC 0x80
+# define DS3232_REG_CR_INTCN 0x04
+# define DS3232_REG_CR_A2IE 0x02
+# define DS3232_REG_CR_A1IE 0x01
+
+#define DS3232_REG_SR 0x0F /* control/status register */
+# define DS3232_REG_SR_OSF 0x80
+# define DS3232_REG_SR_BSY 0x04
+# define DS3232_REG_SR_A2F 0x02
+# define DS3232_REG_SR_A1F 0x01
+
+struct ds3232 {
+ struct i2c_client *client;
+ struct rtc_device *rtc;
+ struct work_struct work;
+
+ /* The mutex protects alarm operations, and prevents a race
+ * between the enable_irq() in the workqueue and the free_irq()
+ * in the remove function.
+ */
+ struct mutex mutex;
+ int exiting;
+};
+
+static struct i2c_driver ds3232_driver;
+
+static int ds3232_check_rtc_status(struct i2c_client *client)
+{
+ int ret = 0;
+ int control, stat;
+
+ stat = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
+ if (stat < 0)
+ return stat;
+
+ if (stat & DS3232_REG_SR_OSF)
+ dev_warn(&client->dev,
+ "oscillator discontinuity flagged, "
+ "time unreliable\n");
+
+ stat &= ~(DS3232_REG_SR_OSF | DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
+
+ ret = i2c_smbus_write_byte_data(client, DS3232_REG_SR, stat);
+ if (ret < 0)
+ return ret;
+
+ /* If the alarm is pending, clear it before requesting
+ * the interrupt, so an interrupt event isn't reported
+ * before everything is initialized.
+ */
+
+ control = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
+ if (control < 0)
+ return control;
+
+ control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
+ control |= DS3232_REG_CR_INTCN;
+
+ return i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
+}
+
+static int ds3232_read_time(struct device *dev, struct rtc_time *time)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int ret;
+ u8 buf[7];
+ unsigned int year, month, day, hour, minute, second;
+ unsigned int week, twelve_hr, am_pm;
+ unsigned int century, add_century = 0;
+
+ ret = i2c_smbus_read_i2c_block_data(client, DS3232_REG_SECONDS, 7, buf);
+
+ if (ret < 0)
+ return ret;
+ if (ret < 7)
+ return -EIO;
+
+ second = buf[0];
+ minute = buf[1];
+ hour = buf[2];
+ week = buf[3];
+ day = buf[4];
+ month = buf[5];
+ year = buf[6];
+
+ /* Extract additional information for AM/PM and century */
+
+ twelve_hr = hour & 0x40;
+ am_pm = hour & 0x20;
+ century = month & 0x80;
+
+ /* Write to rtc_time structure */
+
+ time->tm_sec = bcd2bin(second);
+ time->tm_min = bcd2bin(minute);
+ if (twelve_hr) {
+ /* Convert to 24 hr */
+ if (am_pm)
+ time->tm_hour = bcd2bin(hour & 0x1F) + 12;
+ else
+ time->tm_hour = bcd2bin(hour & 0x1F);
+ } else {
+ time->tm_hour = bcd2bin(hour);
+ }
+
+ time->tm_wday = bcd2bin(week);
+ time->tm_mday = bcd2bin(day);
+ time->tm_mon = bcd2bin(month & 0x7F);
+ if (century)
+ add_century = 100;
+
+ time->tm_year = bcd2bin(year) + add_century;
+
+ return rtc_valid_tm(time);
+}
+
+static int ds3232_set_time(struct device *dev, struct rtc_time *time)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ u8 buf[7];
+
+ /* Extract time from rtc_time and load into ds3232*/
+
+ buf[0] = bin2bcd(time->tm_sec);
+ buf[1] = bin2bcd(time->tm_min);
+ buf[2] = bin2bcd(time->tm_hour);
+ buf[3] = bin2bcd(time->tm_wday); /* Day of the week */
+ buf[4] = bin2bcd(time->tm_mday); /* Date */
+ buf[5] = bin2bcd(time->tm_mon);
+ if (time->tm_year >= 100) {
+ buf[5] |= 0x80;
+ buf[6] = bin2bcd(time->tm_year - 100);
+ } else {
+ buf[6] = bin2bcd(time->tm_year);
+ }
+
+ return i2c_smbus_write_i2c_block_data(client,
+ DS3232_REG_SECONDS, 7, buf);
+}
+
+static irqreturn_t ds3232_irq(int irq, void *dev_id)
+{
+ struct i2c_client *client = dev_id;
+ struct ds3232 *ds3232 = i2c_get_clientdata(client);
+
+ disable_irq_nosync(irq);
+ schedule_work(&ds3232->work);
+ return IRQ_HANDLED;
+}
+
+static void ds3232_work(struct work_struct *work)
+{
+ struct ds3232 *ds3232 = container_of(work, struct ds3232, work);
+ struct i2c_client *client = ds3232->client;
+ int stat, control;
+
+ mutex_lock(&ds3232->mutex);
+
+ stat = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
+ if (stat < 0)
+ goto unlock;
+
+ if (stat & DS3232_REG_SR_A1F) {
+ control = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
+ if (control < 0)
+ goto out;
+ /* disable alarm1 interrupt */
+ control &= ~(DS3232_REG_CR_A1IE);
+ i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
+
+ /* clear the alarm pend flag */
+ stat &= ~DS3232_REG_SR_A1F;
+ i2c_smbus_write_byte_data(client, DS3232_REG_SR, stat);
+
+ rtc_update_irq(ds3232->rtc, 1, RTC_AF | RTC_IRQF);
+ }
+
+out:
+ if (!ds3232->exiting)
+ enable_irq(client->irq);
+unlock:
+ mutex_unlock(&ds3232->mutex);
+}
+
+static const struct rtc_class_ops ds3232_rtc_ops = {
+ .read_time = ds3232_read_time,
+ .set_time = ds3232_set_time,
+};
+
+static int __devinit ds3232_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ds3232 *ds3232;
+ int ret;
+
+ ds3232 = kzalloc(sizeof(struct ds3232), GFP_KERNEL);
+ if (!ds3232)
+ return -ENOMEM;
+
+ ds3232->client = client;
+ i2c_set_clientdata(client, ds3232);
+
+ INIT_WORK(&ds3232->work, ds3232_work);
+ mutex_init(&ds3232->mutex);
+
+ ret = ds3232_check_rtc_status(client);
+ if (ret)
+ goto out_free;
+
+ ds3232->rtc = rtc_device_register(client->name, &client->dev,
+ &ds3232_rtc_ops, THIS_MODULE);
+ if (IS_ERR(ds3232->rtc)) {
+ ret = PTR_ERR(ds3232->rtc);
+ dev_err(&client->dev, "unable to register the class device\n");
+ goto out_irq;
+ }
+
+ if (client->irq >= 0) {
+ ret = request_irq(client->irq, ds3232_irq, 0,
+ "ds3232", client);
+ if (ret) {
+ dev_err(&client->dev, "unable to request IRQ\n");
+ goto out_free;
+ }
+ }
+
+ return 0;
+
+out_irq:
+ if (client->irq >= 0)
+ free_irq(client->irq, client);
+
+out_free:
+ i2c_set_clientdata(client, NULL);
+ kfree(ds3232);
+ return ret;
+}
+
+static int __devexit ds3232_remove(struct i2c_client *client)
+{
+ struct ds3232 *ds3232 = i2c_get_clientdata(client);
+
+ if (client->irq >= 0) {
+ mutex_lock(&ds3232->mutex);
+ ds3232->exiting = 1;
+ mutex_unlock(&ds3232->mutex);
+
+ free_irq(client->irq, client);
+ flush_scheduled_work();
+ }
+
+ rtc_device_unregister(ds3232->rtc);
+ i2c_set_clientdata(client, NULL);
+ kfree(ds3232);
+ return 0;
+}
+
+static const struct i2c_device_id ds3232_id[] = {
+ { "ds3232", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ds3232_id);
+
+static struct i2c_driver ds3232_driver = {
+ .driver = {
+ .name = "rtc-ds3232",
+ .owner = THIS_MODULE,
+ },
+ .probe = ds3232_probe,
+ .remove = __devexit_p(ds3232_remove),
+ .id_table = ds3232_id,
+};
+
+static int __init ds3232_init(void)
+{
+ return i2c_add_driver(&ds3232_driver);
+}
+
+static void __exit ds3232_exit(void)
+{
+ i2c_del_driver(&ds3232_driver);
+}
+
+module_init(ds3232_init);
+module_exit(ds3232_exit);
+
+MODULE_AUTHOR("Srikanth Srinivasan <srikanth.srinivasan@freescale.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS3232 RTC Driver");
+MODULE_LICENSE("GPL");
struct i2c_msg msg[4];
struct i2c_client *client;
struct rtc_device *rtc;
+ int alarm_valid;
int data_valid;
- int alarm;
};
static const struct i2c_device_id fm3130_id[] = {
{ "fm3130", 0 },
dev_dbg(dev, "invalid mode %d\n", mode);
break;
}
- /* Checking for alarm */
- if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
- fm3130->alarm = 1;
- fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
- }
+
i2c_smbus_write_byte_data(fm3130->client,
FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
}
struct fm3130 *fm3130 = dev_get_drvdata(dev);
int tmp;
struct rtc_time *tm = &alrm->time;
+
+ if (!fm3130->alarm_valid) {
+ /*
+ * We have invalid alarm in RTC, probably due to battery faults
+ * or other problems. Return EIO for now, it will allow us to
+ * set alarm value later instead of error during probing which
+ * disables device
+ */
+ return -EIO;
+ }
+
/* read the RTC alarm registers all at once */
tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
&fm3130->msg[2], 2);
fm3130->regs[FM3130_ALARM_DATE],
fm3130->regs[FM3130_ALARM_MONTHS]);
-
tm->tm_sec = bcd2bin(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
tm->tm_min = bcd2bin(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
tm->tm_hour = bcd2bin(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
tm->tm_mday = bcd2bin(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
tm->tm_mon = bcd2bin(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
+
if (tm->tm_mon > 0)
tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
+
dev_dbg(dev, "%s secs=%d, mins=%d, "
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
"read alarm", tm->tm_sec, tm->tm_min,
tm->tm_hour, tm->tm_mday,
tm->tm_mon, tm->tm_year, tm->tm_wday);
+ /* check if alarm enabled */
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+ if ((fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AEN) &&
+ (~fm3130->regs[FM3130_RTC_CONTROL] &
+ FM3130_RTC_CONTROL_BIT_CAL)) {
+ alrm->enabled = 1;
+ }
+
return 0;
}
tm->tm_hour, tm->tm_mday,
tm->tm_mon, tm->tm_year, tm->tm_wday);
- if (tm->tm_sec != -1)
- fm3130->regs[FM3130_ALARM_SECONDS] =
- bin2bcd(tm->tm_sec) | 0x80;
+ fm3130->regs[FM3130_ALARM_SECONDS] =
+ (tm->tm_sec != -1) ? bin2bcd(tm->tm_sec) : 0x80;
- if (tm->tm_min != -1)
- fm3130->regs[FM3130_ALARM_MINUTES] =
- bin2bcd(tm->tm_min) | 0x80;
+ fm3130->regs[FM3130_ALARM_MINUTES] =
+ (tm->tm_min != -1) ? bin2bcd(tm->tm_min) : 0x80;
- if (tm->tm_hour != -1)
- fm3130->regs[FM3130_ALARM_HOURS] =
- bin2bcd(tm->tm_hour) | 0x80;
+ fm3130->regs[FM3130_ALARM_HOURS] =
+ (tm->tm_hour != -1) ? bin2bcd(tm->tm_hour) : 0x80;
- if (tm->tm_mday != -1)
- fm3130->regs[FM3130_ALARM_DATE] =
- bin2bcd(tm->tm_mday) | 0x80;
+ fm3130->regs[FM3130_ALARM_DATE] =
+ (tm->tm_mday != -1) ? bin2bcd(tm->tm_mday) : 0x80;
- if (tm->tm_mon != -1)
- fm3130->regs[FM3130_ALARM_MONTHS] =
- bin2bcd(tm->tm_mon + 1) | 0x80;
+ fm3130->regs[FM3130_ALARM_MONTHS] =
+ (tm->tm_mon != -1) ? bin2bcd(tm->tm_mon + 1) : 0x80;
dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
fm3130->regs[FM3130_ALARM_SECONDS],
}
fm3130->regs[FM3130_RTC_CONTROL] =
i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
- /* Checking for alarm */
- if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
- fm3130->alarm = 1;
- fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
- }
+
+ /* enable or disable alarm */
if (alrm->enabled) {
i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
(fm3130->regs[FM3130_RTC_CONTROL] &
} else {
i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
fm3130->regs[FM3130_RTC_CONTROL] &
- ~(FM3130_RTC_CONTROL_BIT_AEN));
+ ~(FM3130_RTC_CONTROL_BIT_CAL) &
+ ~(FM3130_RTC_CONTROL_BIT_AEN));
}
+
+ /* We assume here that data is valid once written */
+ if (!fm3130->alarm_valid)
+ fm3130->alarm_valid = 1;
+
return 0;
}
+static int fm3130_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ int ret = 0;
+
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+ dev_dbg(dev, "alarm_irq_enable: enable=%d, FM3130_RTC_CONTROL=%02x\n",
+ enabled, fm3130->regs[FM3130_RTC_CONTROL]);
+
+ switch (enabled) {
+ case 0: /* alarm off */
+ ret = i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_CAL) &
+ ~(FM3130_RTC_CONTROL_BIT_AEN));
+ break;
+ case 1: /* alarm on */
+ ret = i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_RTC_CONTROL, (fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_CAL)) |
+ FM3130_RTC_CONTROL_BIT_AEN);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
static const struct rtc_class_ops fm3130_rtc_ops = {
.read_time = fm3130_get_time,
.set_time = fm3130_set_time,
.read_alarm = fm3130_read_alarm,
.set_alarm = fm3130_set_alarm,
+ .alarm_irq_enable = fm3130_alarm_irq_enable,
};
static struct i2c_driver fm3130_driver;
fm3130->msg[3].len = FM3130_ALARM_REGS;
fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
+ fm3130->alarm_valid = 0;
fm3130->data_valid = 0;
tmp = i2c_transfer(adapter, fm3130->msg, 4);
fm3130->regs[FM3130_CAL_CONTROL] =
i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
- /* Checking for alarm */
- if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
- fm3130->alarm = 1;
- fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
- }
-
/* Disabling calibration mode */
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) {
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
fm3130->regs[FM3130_CAL_CONTROL] &
~(FM3130_CAL_CONTROL_BIT_nOSCEN));
- /* oscillator fault? clear flag, and warn */
- if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB)
+ /* low battery? clear flag, and warn */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) {
+ i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_LB));
dev_warn(&client->dev, "Low battery!\n");
+ }
- /* oscillator fault? clear flag, and warn */
+ /* check if Power On Reset bit is set */
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
fm3130->regs[FM3130_RTC_CONTROL] &
~FM3130_RTC_CONTROL_BIT_POR);
- dev_warn(&client->dev, "SET TIME!\n");
+ dev_dbg(&client->dev, "POR bit is set\n");
}
/* ACS is controlled by alarm */
i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
- /* TODO */
- /* TODO need to sanity check alarm */
- tmp = fm3130->regs[FM3130_RTC_SECONDS];
- tmp = bcd2bin(tmp & 0x7f);
- if (tmp > 60)
- goto exit_bad;
+ /* alarm registers sanity check */
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+ if (tmp > 59)
+ goto bad_alarm;
+
tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
- if (tmp > 60)
- goto exit_bad;
+ if (tmp > 59)
+ goto bad_alarm;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
+ if (tmp > 23)
+ goto bad_alarm;
tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
if (tmp == 0 || tmp > 31)
- goto exit_bad;
+ goto bad_alarm;
tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
if (tmp == 0 || tmp > 12)
- goto exit_bad;
+ goto bad_alarm;
- tmp = fm3130->regs[FM3130_RTC_HOURS];
+ fm3130->alarm_valid = 1;
+
+bad_alarm:
+
+ /* clock registers sanity chek */
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+ if (tmp > 59)
+ goto bad_clock;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+ if (tmp > 59)
+ goto bad_clock;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
+ if (tmp > 23)
+ goto bad_clock;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_DAY] & 0x7);
+ if (tmp == 0 || tmp > 7)
+ goto bad_clock;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+ if (tmp == 0 || tmp > 31)
+ goto bad_clock;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
+ if (tmp == 0 || tmp > 12)
+ goto bad_clock;
fm3130->data_valid = 1;
-exit_bad:
- if (!fm3130->data_valid)
+bad_clock:
+
+ if (!fm3130->data_valid || !fm3130->alarm_valid)
dev_dbg(&client->dev,
"%s: %02x %02x %02x %02x %02x %02x %02x %02x"
"%02x %02x %02x %02x %02x %02x %02x\n",
--- /dev/null
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2010 Orex Computed Radiography
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/* based on rtc-mc13892.c */
+
+/*
+ * This driver uses the 47-bit 32 kHz counter in the Freescale DryIce block
+ * to implement a Linux RTC. Times and alarms are truncated to seconds.
+ * Since the RTC framework performs API locking via rtc->ops_lock the
+ * only simultaneous accesses we need to deal with is updating DryIce
+ * registers while servicing an alarm.
+ *
+ * Note that reading the DSR (DryIce Status Register) automatically clears
+ * the WCF (Write Complete Flag). All DryIce writes are synchronized to the
+ * LP (Low Power) domain and set the WCF upon completion. Writes to the
+ * DIER (DryIce Interrupt Enable Register) are the only exception. These
+ * occur at normal bus speeds and do not set WCF. Periodic interrupts are
+ * not supported by the hardware.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/workqueue.h>
+
+/* DryIce Register Definitions */
+
+#define DTCMR 0x00 /* Time Counter MSB Reg */
+#define DTCLR 0x04 /* Time Counter LSB Reg */
+
+#define DCAMR 0x08 /* Clock Alarm MSB Reg */
+#define DCALR 0x0c /* Clock Alarm LSB Reg */
+#define DCAMR_UNSET 0xFFFFFFFF /* doomsday - 1 sec */
+
+#define DCR 0x10 /* Control Reg */
+#define DCR_TCE (1 << 3) /* Time Counter Enable */
+
+#define DSR 0x14 /* Status Reg */
+#define DSR_WBF (1 << 10) /* Write Busy Flag */
+#define DSR_WNF (1 << 9) /* Write Next Flag */
+#define DSR_WCF (1 << 8) /* Write Complete Flag */
+#define DSR_WEF (1 << 7) /* Write Error Flag */
+#define DSR_CAF (1 << 4) /* Clock Alarm Flag */
+#define DSR_NVF (1 << 1) /* Non-Valid Flag */
+#define DSR_SVF (1 << 0) /* Security Violation Flag */
+
+#define DIER 0x18 /* Interrupt Enable Reg */
+#define DIER_WNIE (1 << 9) /* Write Next Interrupt Enable */
+#define DIER_WCIE (1 << 8) /* Write Complete Interrupt Enable */
+#define DIER_WEIE (1 << 7) /* Write Error Interrupt Enable */
+#define DIER_CAIE (1 << 4) /* Clock Alarm Interrupt Enable */
+
+/**
+ * struct imxdi_dev - private imxdi rtc data
+ * @pdev: pionter to platform dev
+ * @rtc: pointer to rtc struct
+ * @ioaddr: IO registers pointer
+ * @irq: dryice normal interrupt
+ * @clk: input reference clock
+ * @dsr: copy of the DSR register
+ * @irq_lock: interrupt enable register (DIER) lock
+ * @write_wait: registers write complete queue
+ * @write_mutex: serialize registers write
+ * @work: schedule alarm work
+ */
+struct imxdi_dev {
+ struct platform_device *pdev;
+ struct rtc_device *rtc;
+ void __iomem *ioaddr;
+ int irq;
+ struct clk *clk;
+ u32 dsr;
+ spinlock_t irq_lock;
+ wait_queue_head_t write_wait;
+ struct mutex write_mutex;
+ struct work_struct work;
+};
+
+/*
+ * enable a dryice interrupt
+ */
+static void di_int_enable(struct imxdi_dev *imxdi, u32 intr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&imxdi->irq_lock, flags);
+ __raw_writel(__raw_readl(imxdi->ioaddr + DIER) | intr,
+ imxdi->ioaddr + DIER);
+ spin_unlock_irqrestore(&imxdi->irq_lock, flags);
+}
+
+/*
+ * disable a dryice interrupt
+ */
+static void di_int_disable(struct imxdi_dev *imxdi, u32 intr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&imxdi->irq_lock, flags);
+ __raw_writel(__raw_readl(imxdi->ioaddr + DIER) & ~intr,
+ imxdi->ioaddr + DIER);
+ spin_unlock_irqrestore(&imxdi->irq_lock, flags);
+}
+
+/*
+ * This function attempts to clear the dryice write-error flag.
+ *
+ * A dryice write error is similar to a bus fault and should not occur in
+ * normal operation. Clearing the flag requires another write, so the root
+ * cause of the problem may need to be fixed before the flag can be cleared.
+ */
+static void clear_write_error(struct imxdi_dev *imxdi)
+{
+ int cnt;
+
+ dev_warn(&imxdi->pdev->dev, "WARNING: Register write error!\n");
+
+ /* clear the write error flag */
+ __raw_writel(DSR_WEF, imxdi->ioaddr + DSR);
+
+ /* wait for it to take effect */
+ for (cnt = 0; cnt < 1000; cnt++) {
+ if ((__raw_readl(imxdi->ioaddr + DSR) & DSR_WEF) == 0)
+ return;
+ udelay(10);
+ }
+ dev_err(&imxdi->pdev->dev,
+ "ERROR: Cannot clear write-error flag!\n");
+}
+
+/*
+ * Write a dryice register and wait until it completes.
+ *
+ * This function uses interrupts to determine when the
+ * write has completed.
+ */
+static int di_write_wait(struct imxdi_dev *imxdi, u32 val, int reg)
+{
+ int ret;
+ int rc = 0;
+
+ /* serialize register writes */
+ mutex_lock(&imxdi->write_mutex);
+
+ /* enable the write-complete interrupt */
+ di_int_enable(imxdi, DIER_WCIE);
+
+ imxdi->dsr = 0;
+
+ /* do the register write */
+ __raw_writel(val, imxdi->ioaddr + reg);
+
+ /* wait for the write to finish */
+ ret = wait_event_interruptible_timeout(imxdi->write_wait,
+ imxdi->dsr & (DSR_WCF | DSR_WEF), msecs_to_jiffies(1));
+ if (ret < 0) {
+ rc = ret;
+ goto out;
+ } else if (ret == 0) {
+ dev_warn(&imxdi->pdev->dev,
+ "Write-wait timeout "
+ "val = 0x%08x reg = 0x%08x\n", val, reg);
+ }
+
+ /* check for write error */
+ if (imxdi->dsr & DSR_WEF) {
+ clear_write_error(imxdi);
+ rc = -EIO;
+ }
+
+out:
+ mutex_unlock(&imxdi->write_mutex);
+
+ return rc;
+}
+
+/*
+ * read the seconds portion of the current time from the dryice time counter
+ */
+static int dryice_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct imxdi_dev *imxdi = dev_get_drvdata(dev);
+ unsigned long now;
+
+ now = __raw_readl(imxdi->ioaddr + DTCMR);
+ rtc_time_to_tm(now, tm);
+
+ return 0;
+}
+
+/*
+ * set the seconds portion of dryice time counter and clear the
+ * fractional part.
+ */
+static int dryice_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+ struct imxdi_dev *imxdi = dev_get_drvdata(dev);
+ int rc;
+
+ /* zero the fractional part first */
+ rc = di_write_wait(imxdi, 0, DTCLR);
+ if (rc == 0)
+ rc = di_write_wait(imxdi, secs, DTCMR);
+
+ return rc;
+}
+
+static int dryice_rtc_alarm_irq_enable(struct device *dev,
+ unsigned int enabled)
+{
+ struct imxdi_dev *imxdi = dev_get_drvdata(dev);
+
+ if (enabled)
+ di_int_enable(imxdi, DIER_CAIE);
+ else
+ di_int_disable(imxdi, DIER_CAIE);
+
+ return 0;
+}
+
+/*
+ * read the seconds portion of the alarm register.
+ * the fractional part of the alarm register is always zero.
+ */
+static int dryice_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct imxdi_dev *imxdi = dev_get_drvdata(dev);
+ u32 dcamr;
+
+ dcamr = __raw_readl(imxdi->ioaddr + DCAMR);
+ rtc_time_to_tm(dcamr, &alarm->time);
+
+ /* alarm is enabled if the interrupt is enabled */
+ alarm->enabled = (__raw_readl(imxdi->ioaddr + DIER) & DIER_CAIE) != 0;
+
+ /* don't allow the DSR read to mess up DSR_WCF */
+ mutex_lock(&imxdi->write_mutex);
+
+ /* alarm is pending if the alarm flag is set */
+ alarm->pending = (__raw_readl(imxdi->ioaddr + DSR) & DSR_CAF) != 0;
+
+ mutex_unlock(&imxdi->write_mutex);
+
+ return 0;
+}
+
+/*
+ * set the seconds portion of dryice alarm register
+ */
+static int dryice_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct imxdi_dev *imxdi = dev_get_drvdata(dev);
+ unsigned long now;
+ unsigned long alarm_time;
+ int rc;
+
+ rc = rtc_tm_to_time(&alarm->time, &alarm_time);
+ if (rc)
+ return rc;
+
+ /* don't allow setting alarm in the past */
+ now = __raw_readl(imxdi->ioaddr + DTCMR);
+ if (alarm_time < now)
+ return -EINVAL;
+
+ /* write the new alarm time */
+ rc = di_write_wait(imxdi, (u32)alarm_time, DCAMR);
+ if (rc)
+ return rc;
+
+ if (alarm->enabled)
+ di_int_enable(imxdi, DIER_CAIE); /* enable alarm intr */
+ else
+ di_int_disable(imxdi, DIER_CAIE); /* disable alarm intr */
+
+ return 0;
+}
+
+static struct rtc_class_ops dryice_rtc_ops = {
+ .read_time = dryice_rtc_read_time,
+ .set_mmss = dryice_rtc_set_mmss,
+ .alarm_irq_enable = dryice_rtc_alarm_irq_enable,
+ .read_alarm = dryice_rtc_read_alarm,
+ .set_alarm = dryice_rtc_set_alarm,
+};
+
+/*
+ * dryice "normal" interrupt handler
+ */
+static irqreturn_t dryice_norm_irq(int irq, void *dev_id)
+{
+ struct imxdi_dev *imxdi = dev_id;
+ u32 dsr, dier;
+ irqreturn_t rc = IRQ_NONE;
+
+ dier = __raw_readl(imxdi->ioaddr + DIER);
+
+ /* handle write complete and write error cases */
+ if ((dier & DIER_WCIE)) {
+ /*If the write wait queue is empty then there is no pending
+ operations. It means the interrupt is for DryIce -Security.
+ IRQ must be returned as none.*/
+ if (list_empty_careful(&imxdi->write_wait.task_list))
+ return rc;
+
+ /* DSR_WCF clears itself on DSR read */
+ dsr = __raw_readl(imxdi->ioaddr + DSR);
+ if ((dsr & (DSR_WCF | DSR_WEF))) {
+ /* mask the interrupt */
+ di_int_disable(imxdi, DIER_WCIE);
+
+ /* save the dsr value for the wait queue */
+ imxdi->dsr |= dsr;
+
+ wake_up_interruptible(&imxdi->write_wait);
+ rc = IRQ_HANDLED;
+ }
+ }
+
+ /* handle the alarm case */
+ if ((dier & DIER_CAIE)) {
+ /* DSR_WCF clears itself on DSR read */
+ dsr = __raw_readl(imxdi->ioaddr + DSR);
+ if (dsr & DSR_CAF) {
+ /* mask the interrupt */
+ di_int_disable(imxdi, DIER_CAIE);
+
+ /* finish alarm in user context */
+ schedule_work(&imxdi->work);
+ rc = IRQ_HANDLED;
+ }
+ }
+ return rc;
+}
+
+/*
+ * post the alarm event from user context so it can sleep
+ * on the write completion.
+ */
+static void dryice_work(struct work_struct *work)
+{
+ struct imxdi_dev *imxdi = container_of(work,
+ struct imxdi_dev, work);
+
+ /* dismiss the interrupt (ignore error) */
+ di_write_wait(imxdi, DSR_CAF, DSR);
+
+ /* pass the alarm event to the rtc framework. */
+ rtc_update_irq(imxdi->rtc, 1, RTC_AF | RTC_IRQF);
+}
+
+/*
+ * probe for dryice rtc device
+ */
+static int dryice_rtc_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct imxdi_dev *imxdi;
+ int rc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ imxdi = devm_kzalloc(&pdev->dev, sizeof(*imxdi), GFP_KERNEL);
+ if (!imxdi)
+ return -ENOMEM;
+
+ imxdi->pdev = pdev;
+
+ if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
+ pdev->name))
+ return -EBUSY;
+
+ imxdi->ioaddr = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (imxdi->ioaddr == NULL)
+ return -ENOMEM;
+
+ imxdi->irq = platform_get_irq(pdev, 0);
+ if (imxdi->irq < 0)
+ return imxdi->irq;
+
+ init_waitqueue_head(&imxdi->write_wait);
+
+ INIT_WORK(&imxdi->work, dryice_work);
+
+ mutex_init(&imxdi->write_mutex);
+
+ imxdi->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(imxdi->clk))
+ return PTR_ERR(imxdi->clk);
+ clk_enable(imxdi->clk);
+
+ /*
+ * Initialize dryice hardware
+ */
+
+ /* mask all interrupts */
+ __raw_writel(0, imxdi->ioaddr + DIER);
+
+ rc = devm_request_irq(&pdev->dev, imxdi->irq, dryice_norm_irq,
+ IRQF_SHARED, pdev->name, imxdi);
+ if (rc) {
+ dev_warn(&pdev->dev, "interrupt not available.\n");
+ goto err;
+ }
+
+ /* put dryice into valid state */
+ if (__raw_readl(imxdi->ioaddr + DSR) & DSR_NVF) {
+ rc = di_write_wait(imxdi, DSR_NVF | DSR_SVF, DSR);
+ if (rc)
+ goto err;
+ }
+
+ /* initialize alarm */
+ rc = di_write_wait(imxdi, DCAMR_UNSET, DCAMR);
+ if (rc)
+ goto err;
+ rc = di_write_wait(imxdi, 0, DCALR);
+ if (rc)
+ goto err;
+
+ /* clear alarm flag */
+ if (__raw_readl(imxdi->ioaddr + DSR) & DSR_CAF) {
+ rc = di_write_wait(imxdi, DSR_CAF, DSR);
+ if (rc)
+ goto err;
+ }
+
+ /* the timer won't count if it has never been written to */
+ if (__raw_readl(imxdi->ioaddr + DTCMR) == 0) {
+ rc = di_write_wait(imxdi, 0, DTCMR);
+ if (rc)
+ goto err;
+ }
+
+ /* start keeping time */
+ if (!(__raw_readl(imxdi->ioaddr + DCR) & DCR_TCE)) {
+ rc = di_write_wait(imxdi,
+ __raw_readl(imxdi->ioaddr + DCR) | DCR_TCE,
+ DCR);
+ if (rc)
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, imxdi);
+ imxdi->rtc = rtc_device_register(pdev->name, &pdev->dev,
+ &dryice_rtc_ops, THIS_MODULE);
+ if (IS_ERR(imxdi->rtc)) {
+ rc = PTR_ERR(imxdi->rtc);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ clk_disable(imxdi->clk);
+ clk_put(imxdi->clk);
+
+ return rc;
+}
+
+static int __devexit dryice_rtc_remove(struct platform_device *pdev)
+{
+ struct imxdi_dev *imxdi = platform_get_drvdata(pdev);
+
+ flush_work(&imxdi->work);
+
+ /* mask all interrupts */
+ __raw_writel(0, imxdi->ioaddr + DIER);
+
+ rtc_device_unregister(imxdi->rtc);
+
+ clk_disable(imxdi->clk);
+ clk_put(imxdi->clk);
+
+ return 0;
+}
+
+static struct platform_driver dryice_rtc_driver = {
+ .driver = {
+ .name = "imxdi_rtc",
+ .owner = THIS_MODULE,
+ },
+ .remove = __devexit_p(dryice_rtc_remove),
+};
+
+static int __init dryice_rtc_init(void)
+{
+ return platform_driver_probe(&dryice_rtc_driver, dryice_rtc_probe);
+}
+
+static void __exit dryice_rtc_exit(void)
+{
+ platform_driver_unregister(&dryice_rtc_driver);
+}
+
+module_init(dryice_rtc_init);
+module_exit(dryice_rtc_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("IMX DryIce Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * An I2C driver for the Intersil ISL 12022
+ *
+ * Author: Roman Fietze <roman.fietze@telemotive.de>
+ *
+ * Based on the Philips PCF8563 RTC
+ * by Alessandro Zummo <a.zummo@towertech.it>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+#define DRV_VERSION "0.1"
+
+/* ISL register offsets */
+#define ISL12022_REG_SC 0x00
+#define ISL12022_REG_MN 0x01
+#define ISL12022_REG_HR 0x02
+#define ISL12022_REG_DT 0x03
+#define ISL12022_REG_MO 0x04
+#define ISL12022_REG_YR 0x05
+#define ISL12022_REG_DW 0x06
+
+#define ISL12022_REG_SR 0x07
+#define ISL12022_REG_INT 0x08
+
+/* ISL register bits */
+#define ISL12022_HR_MIL (1 << 7) /* military or 24 hour time */
+
+#define ISL12022_SR_LBAT85 (1 << 2)
+#define ISL12022_SR_LBAT75 (1 << 1)
+
+#define ISL12022_INT_WRTC (1 << 6)
+
+
+static struct i2c_driver isl12022_driver;
+
+struct isl12022 {
+ struct rtc_device *rtc;
+
+ bool write_enabled; /* true if write enable is set */
+};
+
+
+static int isl12022_read_regs(struct i2c_client *client, uint8_t reg,
+ uint8_t *data, size_t n)
+{
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = data
+ }, /* setup read ptr */
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = n,
+ .buf = data
+ }
+ };
+
+ int ret;
+
+ data[0] = reg;
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret != ARRAY_SIZE(msgs)) {
+ dev_err(&client->dev, "%s: read error, ret=%d\n",
+ __func__, ret);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
+static int isl12022_write_reg(struct i2c_client *client,
+ uint8_t reg, uint8_t val)
+{
+ uint8_t data[2] = { reg, val };
+ int err;
+
+ err = i2c_master_send(client, data, sizeof(data));
+ if (err != sizeof(data)) {
+ dev_err(&client->dev,
+ "%s: err=%d addr=%02x, data=%02x\n",
+ __func__, err, data[0], data[1]);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
+/*
+ * In the routines that deal directly with the isl12022 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+static int isl12022_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+ uint8_t buf[ISL12022_REG_INT + 1];
+ int ret;
+
+ ret = isl12022_read_regs(client, ISL12022_REG_SC, buf, sizeof(buf));
+ if (ret)
+ return ret;
+
+ if (buf[ISL12022_REG_SR] & (ISL12022_SR_LBAT85 | ISL12022_SR_LBAT75)) {
+ dev_warn(&client->dev,
+ "voltage dropped below %u%%, "
+ "date and time is not reliable.\n",
+ buf[ISL12022_REG_SR] & ISL12022_SR_LBAT85 ? 85 : 75);
+ }
+
+ dev_dbg(&client->dev,
+ "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
+ "mday=%02x, mon=%02x, year=%02x, wday=%02x, "
+ "sr=%02x, int=%02x",
+ __func__,
+ buf[ISL12022_REG_SC],
+ buf[ISL12022_REG_MN],
+ buf[ISL12022_REG_HR],
+ buf[ISL12022_REG_DT],
+ buf[ISL12022_REG_MO],
+ buf[ISL12022_REG_YR],
+ buf[ISL12022_REG_DW],
+ buf[ISL12022_REG_SR],
+ buf[ISL12022_REG_INT]);
+
+ tm->tm_sec = bcd2bin(buf[ISL12022_REG_SC] & 0x7F);
+ tm->tm_min = bcd2bin(buf[ISL12022_REG_MN] & 0x7F);
+ tm->tm_hour = bcd2bin(buf[ISL12022_REG_HR] & 0x3F);
+ tm->tm_mday = bcd2bin(buf[ISL12022_REG_DT] & 0x3F);
+ tm->tm_wday = buf[ISL12022_REG_DW] & 0x07;
+ tm->tm_mon = bcd2bin(buf[ISL12022_REG_MO] & 0x1F) - 1;
+ tm->tm_year = bcd2bin(buf[ISL12022_REG_YR]) + 100;
+
+ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __func__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ /* The clock can give out invalid datetime, but we cannot return
+ * -EINVAL otherwise hwclock will refuse to set the time on bootup. */
+ if (rtc_valid_tm(tm) < 0)
+ dev_err(&client->dev, "retrieved date and time is invalid.\n");
+
+ return 0;
+}
+
+static int isl12022_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+ struct isl12022 *isl12022 = i2c_get_clientdata(client);
+ size_t i;
+ int ret;
+ uint8_t buf[ISL12022_REG_DW + 1];
+
+ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __func__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ if (!isl12022->write_enabled) {
+
+ ret = isl12022_read_regs(client, ISL12022_REG_INT, buf, 1);
+ if (ret)
+ return ret;
+
+ /* Check if WRTC (write rtc enable) is set factory default is
+ * 0 (not set) */
+ if (!(buf[0] & ISL12022_INT_WRTC)) {
+ dev_info(&client->dev,
+ "init write enable and 24 hour format\n");
+
+ /* Set the write enable bit. */
+ ret = isl12022_write_reg(client,
+ ISL12022_REG_INT,
+ buf[0] | ISL12022_INT_WRTC);
+ if (ret)
+ return ret;
+
+ /* Write to any RTC register to start RTC, we use the
+ * HR register, setting the MIL bit to use the 24 hour
+ * format. */
+ ret = isl12022_read_regs(client, ISL12022_REG_HR,
+ buf, 1);
+ if (ret)
+ return ret;
+
+ ret = isl12022_write_reg(client,
+ ISL12022_REG_HR,
+ buf[0] | ISL12022_HR_MIL);
+ if (ret)
+ return ret;
+ }
+
+ isl12022->write_enabled = 1;
+ }
+
+ /* hours, minutes and seconds */
+ buf[ISL12022_REG_SC] = bin2bcd(tm->tm_sec);
+ buf[ISL12022_REG_MN] = bin2bcd(tm->tm_min);
+ buf[ISL12022_REG_HR] = bin2bcd(tm->tm_hour) | ISL12022_HR_MIL;
+
+ buf[ISL12022_REG_DT] = bin2bcd(tm->tm_mday);
+
+ /* month, 1 - 12 */
+ buf[ISL12022_REG_MO] = bin2bcd(tm->tm_mon + 1);
+
+ /* year and century */
+ buf[ISL12022_REG_YR] = bin2bcd(tm->tm_year % 100);
+
+ buf[ISL12022_REG_DW] = tm->tm_wday & 0x07;
+
+ /* write register's data */
+ for (i = 0; i < ARRAY_SIZE(buf); i++) {
+ ret = isl12022_write_reg(client, ISL12022_REG_SC + i,
+ buf[ISL12022_REG_SC + i]);
+ if (ret)
+ return -EIO;
+ };
+
+ return 0;
+}
+
+static int isl12022_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ return isl12022_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int isl12022_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ return isl12022_set_datetime(to_i2c_client(dev), tm);
+}
+
+static const struct rtc_class_ops isl12022_rtc_ops = {
+ .read_time = isl12022_rtc_read_time,
+ .set_time = isl12022_rtc_set_time,
+};
+
+static int isl12022_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct isl12022 *isl12022;
+
+ int ret = 0;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -ENODEV;
+
+ isl12022 = kzalloc(sizeof(struct isl12022), GFP_KERNEL);
+ if (!isl12022)
+ return -ENOMEM;
+
+ dev_dbg(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+
+ i2c_set_clientdata(client, isl12022);
+
+ isl12022->rtc = rtc_device_register(isl12022_driver.driver.name,
+ &client->dev,
+ &isl12022_rtc_ops,
+ THIS_MODULE);
+
+ if (IS_ERR(isl12022->rtc)) {
+ ret = PTR_ERR(isl12022->rtc);
+ goto exit_kfree;
+ }
+
+ return 0;
+
+exit_kfree:
+ kfree(isl12022);
+
+ return ret;
+}
+
+static int isl12022_remove(struct i2c_client *client)
+{
+ struct isl12022 *isl12022 = i2c_get_clientdata(client);
+
+ rtc_device_unregister(isl12022->rtc);
+ kfree(isl12022);
+
+ return 0;
+}
+
+static const struct i2c_device_id isl12022_id[] = {
+ { "isl12022", 0 },
+ { "rtc8564", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, isl12022_id);
+
+static struct i2c_driver isl12022_driver = {
+ .driver = {
+ .name = "rtc-isl12022",
+ },
+ .probe = isl12022_probe,
+ .remove = isl12022_remove,
+ .id_table = isl12022_id,
+};
+
+static int __init isl12022_init(void)
+{
+ return i2c_add_driver(&isl12022_driver);
+}
+
+static void __exit isl12022_exit(void)
+{
+ i2c_del_driver(&isl12022_driver);
+}
+
+module_init(isl12022_init);
+module_exit(isl12022_exit);
+
+MODULE_AUTHOR("roman.fietze@telemotive.de");
+MODULE_DESCRIPTION("ISL 12022 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
/* assume 20YY not 19YY, and ignore the Century Bit */
tm->tm_year = bcd2bin(buf[M41T80_REG_YEAR]) + 100;
- return 0;
+ return rtc_valid_tm(tm);
}
/* Sets the given date and time to the real time clock. */
t->time.tm_isdst = -1;
t->enabled = !!(reg[M41T80_REG_ALARM_MON] & M41T80_ALMON_AFE);
t->pending = !!(reg[M41T80_REG_FLAGS] & M41T80_FLAGS_AF);
- return 0;
+ return rtc_valid_tm(t);
}
static struct rtc_class_ops m41t80_rtc_ops = {
dev_dbg(dev, "RTC read time %04d-%02d-%02d %02d/%02d/%02d\n",
tm->tm_year + 1900, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
- return 0;
+ return rtc_valid_tm(tm);
}
static int m48t59_rtc_set_time(struct device *dev, struct rtc_time *tm)
dev_dbg(dev, "RTC read alarm time %04d-%02d-%02d %02d/%02d/%02d\n",
tm->tm_year + 1900, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
- return 0;
+ return rtc_valid_tm(tm);
}
/*
free_irq(m48t59->irq, &pdev->dev);
if (m48t59->ioaddr)
iounmap(m48t59->ioaddr);
- if (m48t59)
kfree(m48t59);
return ret;
}
if (ops->readbyte(M48T86_REG_HOUR) & 0x80)
tm->tm_hour += 12;
- return 0;
+ return rtc_valid_tm(tm);
}
static int m48t86_rtc_set_time(struct device *dev, struct rtc_time *tm)
bcd2bin(regs[MAX6900_REG_CENTURY]) * 100 - 1900;
tm->tm_wday = bcd2bin(regs[MAX6900_REG_DW]);
- return 0;
+ return rtc_valid_tm(tm);
}
static int max6900_i2c_clear_write_protect(struct i2c_client *client)
.update_irq_enable = mpc5121_rtc_update_irq_enable,
};
-static int __devinit mpc5121_rtc_probe(struct of_device *op,
+static int __devinit mpc5121_rtc_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct mpc5121_rtc_data *rtc;
return err;
}
-static int __devexit mpc5121_rtc_remove(struct of_device *op)
+static int __devexit mpc5121_rtc_remove(struct platform_device *op)
{
struct mpc5121_rtc_data *rtc = dev_get_drvdata(&op->dev);
struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
void __iomem *ioaddr;
int irq;
struct clk *clk;
- unsigned int irqen;
- int alrm_sec;
- int alrm_min;
- int alrm_hour;
- int alrm_mday;
- struct timespec mxc_rtc_delta;
struct rtc_time g_rtc_alarm;
};
static int *check_rtc_access_enable(struct nuc900_rtc *nuc900_rtc)
{
- unsigned int i;
+ unsigned int timeout = 0x1000;
__raw_writel(INIRRESET, nuc900_rtc->rtc_reg + REG_RTC_INIR);
mdelay(10);
__raw_writel(AERPOWERON, nuc900_rtc->rtc_reg + REG_RTC_AER);
- for (i = 0; i < 1000; i++) {
- if (__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_AER) & AERRWENB)
- return 0;
- }
+ while (!(__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_AER) & AERRWENB)
+ && timeout--)
+ mdelay(1);
- if ((__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_AER) & AERRWENB) == 0x0)
- return ERR_PTR(-ENODEV);
+ if (!timeout)
+ return ERR_PTR(-EPERM);
- return ERR_PTR(-EPERM);
+ return 0;
}
-static void nuc900_rtc_bcd2bin(unsigned int timereg,
+static int nuc900_rtc_bcd2bin(unsigned int timereg,
unsigned int calreg, struct rtc_time *tm)
{
tm->tm_mday = bcd2bin(calreg >> 0);
tm->tm_min = bcd2bin(timereg >> 8);
tm->tm_hour = bcd2bin(timereg >> 16);
- rtc_valid_tm(tm);
+ return rtc_valid_tm(tm);
}
-static void nuc900_rtc_bin2bcd(struct rtc_time *settm,
+static void nuc900_rtc_bin2bcd(struct device *dev, struct rtc_time *settm,
struct nuc900_bcd_time *gettm)
{
gettm->bcd_mday = bin2bcd(settm->tm_mday) << 0;
gettm->bcd_mon = bin2bcd(settm->tm_mon) << 8;
- gettm->bcd_year = bin2bcd(settm->tm_year - 100) << 16;
+
+ if (settm->tm_year < 100) {
+ dev_warn(dev, "The year will be between 1970-1999, right?\n");
+ gettm->bcd_year = bin2bcd(settm->tm_year) << 16;
+ } else {
+ gettm->bcd_year = bin2bcd(settm->tm_year - 100) << 16;
+ }
gettm->bcd_sec = bin2bcd(settm->tm_sec) << 0;
gettm->bcd_min = bin2bcd(settm->tm_min) << 8;
timeval = __raw_readl(rtc->rtc_reg + REG_RTC_TLR);
clrval = __raw_readl(rtc->rtc_reg + REG_RTC_CLR);
- nuc900_rtc_bcd2bin(timeval, clrval, tm);
-
- return 0;
+ return nuc900_rtc_bcd2bin(timeval, clrval, tm);
}
static int nuc900_rtc_set_time(struct device *dev, struct rtc_time *tm)
unsigned long val;
int *err;
- nuc900_rtc_bin2bcd(tm, &gettm);
+ nuc900_rtc_bin2bcd(dev, tm, &gettm);
err = check_rtc_access_enable(rtc);
if (IS_ERR(err))
timeval = __raw_readl(rtc->rtc_reg + REG_RTC_TAR);
carval = __raw_readl(rtc->rtc_reg + REG_RTC_CAR);
- nuc900_rtc_bcd2bin(timeval, carval, &alrm->time);
-
- return 0;
+ return nuc900_rtc_bcd2bin(timeval, carval, &alrm->time);
}
static int nuc900_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
unsigned long val;
int *err;
- nuc900_rtc_bin2bcd(&alrm->time, &tm);
+ nuc900_rtc_bin2bcd(dev, &alrm->time, &tm);
err = check_rtc_access_enable(rtc);
if (IS_ERR(err))
goto fail2;
}
- nuc900_rtc->irq_num = platform_get_irq(pdev, 0);
- if (request_irq(nuc900_rtc->irq_num, nuc900_rtc_interrupt,
- IRQF_DISABLED, "nuc900rtc", nuc900_rtc)) {
- dev_err(&pdev->dev, "NUC900 RTC request irq failed\n");
- err = -EBUSY;
- goto fail3;
- }
+ platform_set_drvdata(pdev, nuc900_rtc);
nuc900_rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev,
&nuc900_rtc_ops, THIS_MODULE);
if (IS_ERR(nuc900_rtc->rtcdev)) {
dev_err(&pdev->dev, "rtc device register faild\n");
err = PTR_ERR(nuc900_rtc->rtcdev);
- goto fail4;
+ goto fail3;
}
- platform_set_drvdata(pdev, nuc900_rtc);
__raw_writel(__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_TSSR) | MODE24,
nuc900_rtc->rtc_reg + REG_RTC_TSSR);
+ nuc900_rtc->irq_num = platform_get_irq(pdev, 0);
+ if (request_irq(nuc900_rtc->irq_num, nuc900_rtc_interrupt,
+ IRQF_DISABLED, "nuc900rtc", nuc900_rtc)) {
+ dev_err(&pdev->dev, "NUC900 RTC request irq failed\n");
+ err = -EBUSY;
+ goto fail4;
+ }
+
return 0;
-fail4: free_irq(nuc900_rtc->irq_num, nuc900_rtc);
+fail4: rtc_device_unregister(nuc900_rtc->rtcdev);
fail3: iounmap(nuc900_rtc->rtc_reg);
fail2: release_mem_region(res->start, resource_size(res));
fail1: kfree(nuc900_rtc);
struct nuc900_rtc *nuc900_rtc = platform_get_drvdata(pdev);
struct resource *res;
- rtc_device_unregister(nuc900_rtc->rtcdev);
free_irq(nuc900_rtc->irq_num, nuc900_rtc);
+ rtc_device_unregister(nuc900_rtc->rtcdev);
iounmap(nuc900_rtc->rtc_reg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
return 0;
}
-struct pcf8563_limit
-{
- unsigned char reg;
- unsigned char mask;
- unsigned char min;
- unsigned char max;
-};
-
static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
return pcf8563_get_datetime(to_i2c_client(dev), tm);
#include <linux/io.h>
#include <linux/bcd.h>
#include <linux/delay.h>
-#include <linux/version.h>
#include <linux/slab.h>
/*
int irq_Alrm;
struct rtc_device *rtc;
spinlock_t lock; /* Protects this structure */
- struct rtc_time rtc_alarm;
};
static u32 ryxr_calc(struct rtc_time *tm)
return 0;
}
-static int pxa_rtc_ioctl(struct device *dev, unsigned int cmd,
- unsigned long arg)
+static int pxa_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
- int ret = 0;
spin_lock_irq(&pxa_rtc->lock);
- switch (cmd) {
- case RTC_AIE_OFF:
- rtsr_clear_bits(pxa_rtc, RTSR_RDALE1);
- break;
- case RTC_AIE_ON:
+
+ if (enabled)
rtsr_set_bits(pxa_rtc, RTSR_RDALE1);
- break;
- case RTC_UIE_OFF:
- rtsr_clear_bits(pxa_rtc, RTSR_HZE);
- break;
- case RTC_UIE_ON:
+ else
+ rtsr_clear_bits(pxa_rtc, RTSR_RDALE1);
+
+ spin_unlock_irq(&pxa_rtc->lock);
+ return 0;
+}
+
+static int pxa_update_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
+
+ spin_lock_irq(&pxa_rtc->lock);
+
+ if (enabled)
rtsr_set_bits(pxa_rtc, RTSR_HZE);
- break;
- default:
- ret = -ENOIOCTLCMD;
- }
+ else
+ rtsr_clear_bits(pxa_rtc, RTSR_HZE);
spin_unlock_irq(&pxa_rtc->lock);
- return ret;
+ return 0;
}
static int pxa_rtc_read_time(struct device *dev, struct rtc_time *tm)
static const struct rtc_class_ops pxa_rtc_ops = {
.open = pxa_rtc_open,
.release = pxa_rtc_release,
- .ioctl = pxa_rtc_ioctl,
.read_time = pxa_rtc_read_time,
.set_time = pxa_rtc_set_time,
.read_alarm = pxa_rtc_read_alarm,
.set_alarm = pxa_rtc_set_alarm,
+ .alarm_irq_enable = pxa_alarm_irq_enable,
+ .update_irq_enable = pxa_update_irq_enable,
.proc = pxa_rtc_proc,
.irq_set_state = pxa_periodic_irq_set_state,
.irq_set_freq = pxa_periodic_irq_set_freq,
struct rp5c01_priv {
u32 __iomem *regs;
struct rtc_device *rtc;
+ spinlock_t lock; /* against concurrent RTC/NVRAM access */
+ struct bin_attribute nvram_attr;
};
static inline unsigned int rp5c01_read(struct rp5c01_priv *priv,
{
struct rp5c01_priv *priv = dev_get_drvdata(dev);
+ spin_lock_irq(&priv->lock);
rp5c01_lock(priv);
tm->tm_sec = rp5c01_read(priv, RP5C01_10_SECOND) * 10 +
tm->tm_year += 100;
rp5c01_unlock(priv);
+ spin_unlock_irq(&priv->lock);
return rtc_valid_tm(tm);
}
{
struct rp5c01_priv *priv = dev_get_drvdata(dev);
+ spin_lock_irq(&priv->lock);
rp5c01_lock(priv);
rp5c01_write(priv, tm->tm_sec / 10, RP5C01_10_SECOND);
rp5c01_write(priv, tm->tm_year % 10, RP5C01_1_YEAR);
rp5c01_unlock(priv);
+ spin_unlock_irq(&priv->lock);
return 0;
}
.set_time = rp5c01_set_time,
};
+
+/*
+ * The NVRAM is organized as 2 blocks of 13 nibbles of 4 bits.
+ * We provide access to them like AmigaOS does: the high nibble of each 8-bit
+ * byte is stored in BLOCK10, the low nibble in BLOCK11.
+ */
+
+static ssize_t rp5c01_nvram_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t pos, size_t size)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct rp5c01_priv *priv = dev_get_drvdata(dev);
+ ssize_t count;
+
+ spin_lock_irq(&priv->lock);
+
+ for (count = 0; size > 0 && pos < RP5C01_MODE; count++, size--) {
+ u8 data;
+
+ rp5c01_write(priv,
+ RP5C01_MODE_TIMER_EN | RP5C01_MODE_RAM_BLOCK10,
+ RP5C01_MODE);
+ data = rp5c01_read(priv, pos) << 4;
+ rp5c01_write(priv,
+ RP5C01_MODE_TIMER_EN | RP5C01_MODE_RAM_BLOCK11,
+ RP5C01_MODE);
+ data |= rp5c01_read(priv, pos++);
+ rp5c01_write(priv, RP5C01_MODE_TIMER_EN | RP5C01_MODE_MODE01,
+ RP5C01_MODE);
+ *buf++ = data;
+ }
+
+ spin_unlock_irq(&priv->lock);
+ return count;
+}
+
+static ssize_t rp5c01_nvram_write(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t pos, size_t size)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct rp5c01_priv *priv = dev_get_drvdata(dev);
+ ssize_t count;
+
+ spin_lock_irq(&priv->lock);
+
+ for (count = 0; size > 0 && pos < RP5C01_MODE; count++, size--) {
+ u8 data = *buf++;
+
+ rp5c01_write(priv,
+ RP5C01_MODE_TIMER_EN | RP5C01_MODE_RAM_BLOCK10,
+ RP5C01_MODE);
+ rp5c01_write(priv, data >> 4, pos);
+ rp5c01_write(priv,
+ RP5C01_MODE_TIMER_EN | RP5C01_MODE_RAM_BLOCK11,
+ RP5C01_MODE);
+ rp5c01_write(priv, data & 0xf, pos++);
+ rp5c01_write(priv, RP5C01_MODE_TIMER_EN | RP5C01_MODE_MODE01,
+ RP5C01_MODE);
+ }
+
+ spin_unlock_irq(&priv->lock);
+ return count;
+}
+
static int __init rp5c01_rtc_probe(struct platform_device *dev)
{
struct resource *res;
goto out_free_priv;
}
+ sysfs_bin_attr_init(&priv->nvram_attr);
+ priv->nvram_attr.attr.name = "nvram";
+ priv->nvram_attr.attr.mode = S_IRUGO | S_IWUSR;
+ priv->nvram_attr.read = rp5c01_nvram_read;
+ priv->nvram_attr.write = rp5c01_nvram_write;
+ priv->nvram_attr.size = RP5C01_MODE;
+
+ spin_lock_init(&priv->lock);
+
rtc = rtc_device_register("rtc-rp5c01", &dev->dev, &rp5c01_rtc_ops,
THIS_MODULE);
if (IS_ERR(rtc)) {
priv->rtc = rtc;
platform_set_drvdata(dev, priv);
+
+ error = sysfs_create_bin_file(&dev->dev.kobj, &priv->nvram_attr);
+ if (error)
+ goto out_unregister;
+
return 0;
+out_unregister:
+ rtc_device_unregister(rtc);
out_unmap:
iounmap(priv->regs);
out_free_priv:
{
struct rp5c01_priv *priv = platform_get_drvdata(dev);
+ sysfs_remove_bin_file(&dev->dev.kobj, &priv->nvram_attr);
rtc_device_unregister(priv->rtc);
iounmap(priv->regs);
kfree(priv);
/* drivers/rtc/rtc-s3c.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
*
* Copyright (c) 2004,2006 Simtec Electronics
* Ben Dooks, <ben@simtec.co.uk>
static struct resource *s3c_rtc_mem;
+static struct clk *rtc_clk;
static void __iomem *s3c_rtc_base;
static int s3c_rtc_alarmno = NO_IRQ;
static int s3c_rtc_tickno = NO_IRQ;
struct rtc_device *rdev = id;
rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
+
+ if (s3c_rtc_cpu_type == TYPE_S3C64XX)
+ writeb(S3C2410_INTP_ALM, s3c_rtc_base + S3C2410_INTP);
+
return IRQ_HANDLED;
}
struct rtc_device *rdev = id;
rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
+
+ if (s3c_rtc_cpu_type == TYPE_S3C64XX)
+ writeb(S3C2410_INTP_TIC, s3c_rtc_base + S3C2410_INTP);
+
return IRQ_HANDLED;
}
if (enabled)
tmp |= S3C64XX_RTCCON_TICEN;
- writeb(tmp, s3c_rtc_base + S3C2410_RTCCON);
+ writew(tmp, s3c_rtc_base + S3C2410_RTCCON);
} else {
tmp = readb(s3c_rtc_base + S3C2410_TICNT);
tmp &= ~S3C2410_TICNT_ENABLE;
tmp |= (rtc_dev->max_user_freq / freq)-1;
- writeb(tmp, s3c_rtc_base + S3C2410_TICNT);
+ writel(tmp, s3c_rtc_base + S3C2410_TICNT);
spin_unlock_irq(&s3c_rtc_pie_lock);
return 0;
s3c_rtc_setpie(&dev->dev, 0);
s3c_rtc_setaie(0);
+ clk_disable(rtc_clk);
+ clk_put(rtc_clk);
+ rtc_clk = NULL;
+
iounmap(s3c_rtc_base);
release_resource(s3c_rtc_mem);
kfree(s3c_rtc_mem);
{
struct rtc_device *rtc;
struct resource *res;
+ unsigned int tmp, i;
int ret;
pr_debug("%s: probe=%p\n", __func__, pdev);
goto err_nomap;
}
+ rtc_clk = clk_get(&pdev->dev, "rtc");
+ if (IS_ERR(rtc_clk)) {
+ dev_err(&pdev->dev, "failed to find rtc clock source\n");
+ ret = PTR_ERR(rtc_clk);
+ rtc_clk = NULL;
+ goto err_clk;
+ }
+
+ clk_enable(rtc_clk);
+
/* check to see if everything is setup correctly */
s3c_rtc_enable(pdev, 1);
s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+ /* Check RTC Time */
+
+ for (i = S3C2410_RTCSEC; i <= S3C2410_RTCYEAR; i += 0x4) {
+ tmp = readb(s3c_rtc_base + i);
+
+ if ((tmp & 0xf) > 0x9 || ((tmp >> 4) & 0xf) > 0x9)
+ writeb(0, s3c_rtc_base + i);
+ }
+
if (s3c_rtc_cpu_type == TYPE_S3C64XX)
rtc->max_user_freq = 32768;
else
err_nortc:
s3c_rtc_enable(pdev, 0);
+ clk_disable(rtc_clk);
+ clk_put(rtc_clk);
+
+ err_clk:
iounmap(s3c_rtc_base);
err_nomap:
#include <linux/hdreg.h>
#include <linux/async.h>
#include <linux/mutex.h>
+#include <linux/smp_lock.h>
#include <asm/ccwdev.h>
#include <asm/ebcdic.h>
if (device->discipline->term_IO(cqr) != 0) {
/* Hmpf, try again in 5 sec */
dev_err(&device->cdev->dev,
- "cqr %p timed out (%is) but cannot be "
+ "cqr %p timed out (%lus) but cannot be "
"ended, retrying in 5 s\n",
cqr, (cqr->expires/HZ));
cqr->expires += 5*HZ;
dasd_device_set_timer(device, 5*HZ);
} else {
dev_err(&device->cdev->dev,
- "cqr %p timed out (%is), %i retries "
+ "cqr %p timed out (%lus), %i retries "
"remaining\n", cqr, (cqr->expires/HZ),
cqr->retries);
}
*/
blk_queue_max_segment_size(block->request_queue, PAGE_SIZE);
blk_queue_segment_boundary(block->request_queue, PAGE_SIZE - 1);
- blk_queue_ordered(block->request_queue, QUEUE_ORDERED_DRAIN, NULL);
+ blk_queue_ordered(block->request_queue, QUEUE_ORDERED_DRAIN);
}
/*
if (!block)
return -ENODEV;
+ lock_kernel();
base = block->base;
atomic_inc(&block->open_count);
if (test_bit(DASD_FLAG_OFFLINE, &base->flags)) {
goto out;
}
+ unlock_kernel();
return 0;
out:
module_put(base->discipline->owner);
unlock:
atomic_dec(&block->open_count);
+ unlock_kernel();
return rc;
}
{
struct dasd_block *block = disk->private_data;
+ lock_kernel();
atomic_dec(&block->open_count);
module_put(block->base->discipline->owner);
+ unlock_kernel();
return 0;
}
static DEVICE_ATTR(eer_enabled, 0644, dasd_eer_show, dasd_eer_store);
+/*
+ * expiration time for default requests
+ */
+static ssize_t
+dasd_expires_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct dasd_device *device;
+ int len;
+
+ device = dasd_device_from_cdev(to_ccwdev(dev));
+ if (IS_ERR(device))
+ return -ENODEV;
+ len = snprintf(buf, PAGE_SIZE, "%lu\n", device->default_expires);
+ dasd_put_device(device);
+ return len;
+}
+
+static ssize_t
+dasd_expires_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dasd_device *device;
+ unsigned long val;
+
+ device = dasd_device_from_cdev(to_ccwdev(dev));
+ if (IS_ERR(device))
+ return -ENODEV;
+
+ if ((strict_strtoul(buf, 10, &val) != 0) ||
+ (val > DASD_EXPIRES_MAX) || val == 0) {
+ dasd_put_device(device);
+ return -EINVAL;
+ }
+
+ if (val)
+ device->default_expires = val;
+
+ dasd_put_device(device);
+ return count;
+}
+
+static DEVICE_ATTR(expires, 0644, dasd_expires_show, dasd_expires_store);
+
static struct attribute * dasd_attrs[] = {
&dev_attr_readonly.attr,
&dev_attr_discipline.attr,
&dev_attr_eer_enabled.attr,
&dev_attr_erplog.attr,
&dev_attr_failfast.attr,
+ &dev_attr_expires.attr,
NULL,
};
sizeof(struct dasd_diag_req)) / \
sizeof(struct dasd_diag_bio)) / 2)
#define DIAG_MAX_RETRIES 32
-#define DIAG_TIMEOUT 50 * HZ
+#define DIAG_TIMEOUT 50
static struct dasd_discipline dasd_diag_discipline;
goto out;
}
+ device->default_expires = DIAG_TIMEOUT;
+
/* Figure out position of label block */
switch (private->rdc_data.vdev_class) {
case DEV_CLASS_FBA:
cqr->startdev = memdev;
cqr->memdev = memdev;
cqr->block = block;
- cqr->expires = DIAG_TIMEOUT;
+ cqr->expires = memdev->default_expires * HZ;
cqr->status = DASD_CQR_FILLED;
return cqr;
}
#define INIT_CQR_UNFORMATTED 1
#define INIT_CQR_ERROR 2
+/* emergency request for reserve/release */
+static struct {
+ struct dasd_ccw_req cqr;
+ struct ccw1 ccw;
+ char data[32];
+} *dasd_reserve_req;
+static DEFINE_MUTEX(dasd_reserve_mutex);
+
/* initial attempt at a probe function. this can be simplified once
* the other detection code is gone */
struct dasd_eckd_private *private;
struct dasd_block *block;
struct dasd_uid temp_uid;
- int is_known, rc;
+ int is_known, rc, i;
int readonly;
+ unsigned long value;
if (!ccw_device_is_pathgroup(device->cdev)) {
dev_warn(&device->cdev->dev,
if (rc)
goto out_err1;
+ /* set default timeout */
+ device->default_expires = DASD_EXPIRES;
+ if (private->gneq) {
+ value = 1;
+ for (i = 0; i < private->gneq->timeout.value; i++)
+ value = 10 * value;
+ value = value * private->gneq->timeout.number;
+ /* do not accept useless values */
+ if (value != 0 && value <= DASD_EXPIRES_MAX)
+ device->default_expires = value;
+ }
+
/* Generate device unique id */
rc = dasd_eckd_generate_uid(device);
if (rc)
cqr->startdev = startdev;
cqr->memdev = startdev;
cqr->block = block;
- cqr->expires = 5 * 60 * HZ; /* 5 minutes */
+ cqr->expires = startdev->default_expires * HZ; /* default 5 minutes */
cqr->lpm = private->path_data.ppm;
cqr->retries = 256;
cqr->buildclk = get_clock();
cqr->startdev = startdev;
cqr->memdev = startdev;
cqr->block = block;
- cqr->expires = 5 * 60 * HZ; /* 5 minutes */
+ cqr->expires = startdev->default_expires * HZ; /* default 5 minutes */
cqr->lpm = private->path_data.ppm;
cqr->retries = 256;
cqr->buildclk = get_clock();
cqr->startdev = startdev;
cqr->memdev = startdev;
cqr->block = block;
- cqr->expires = 5 * 60 * HZ; /* 5 minutes */
+ cqr->expires = startdev->default_expires * HZ; /* default 5 minutes */
cqr->lpm = private->path_data.ppm;
cqr->retries = 256;
cqr->buildclk = get_clock();
struct dasd_ccw_req *cqr;
int rc;
struct ccw1 *ccw;
+ int useglobal;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
+ useglobal = 0;
cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
- DBF_DEV_EVENT(DBF_WARNING, device, "%s",
- "Could not allocate initialization request");
- return PTR_ERR(cqr);
+ mutex_lock(&dasd_reserve_mutex);
+ useglobal = 1;
+ cqr = &dasd_reserve_req->cqr;
+ memset(cqr, 0, sizeof(*cqr));
+ memset(&dasd_reserve_req->ccw, 0,
+ sizeof(dasd_reserve_req->ccw));
+ cqr->cpaddr = &dasd_reserve_req->ccw;
+ cqr->data = &dasd_reserve_req->data;
+ cqr->magic = DASD_ECKD_MAGIC;
}
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_RELEASE;
rc = dasd_sleep_on_immediatly(cqr);
- dasd_sfree_request(cqr, cqr->memdev);
+ if (useglobal)
+ mutex_unlock(&dasd_reserve_mutex);
+ else
+ dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
struct dasd_ccw_req *cqr;
int rc;
struct ccw1 *ccw;
+ int useglobal;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
+ useglobal = 0;
cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
- DBF_DEV_EVENT(DBF_WARNING, device, "%s",
- "Could not allocate initialization request");
- return PTR_ERR(cqr);
+ mutex_lock(&dasd_reserve_mutex);
+ useglobal = 1;
+ cqr = &dasd_reserve_req->cqr;
+ memset(cqr, 0, sizeof(*cqr));
+ memset(&dasd_reserve_req->ccw, 0,
+ sizeof(dasd_reserve_req->ccw));
+ cqr->cpaddr = &dasd_reserve_req->ccw;
+ cqr->data = &dasd_reserve_req->data;
+ cqr->magic = DASD_ECKD_MAGIC;
}
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_RESERVE;
rc = dasd_sleep_on_immediatly(cqr);
- dasd_sfree_request(cqr, cqr->memdev);
+ if (useglobal)
+ mutex_unlock(&dasd_reserve_mutex);
+ else
+ dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
struct dasd_ccw_req *cqr;
int rc;
struct ccw1 *ccw;
+ int useglobal;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
+ useglobal = 0;
cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
- DBF_DEV_EVENT(DBF_WARNING, device, "%s",
- "Could not allocate initialization request");
- return PTR_ERR(cqr);
+ mutex_lock(&dasd_reserve_mutex);
+ useglobal = 1;
+ cqr = &dasd_reserve_req->cqr;
+ memset(cqr, 0, sizeof(*cqr));
+ memset(&dasd_reserve_req->ccw, 0,
+ sizeof(dasd_reserve_req->ccw));
+ cqr->cpaddr = &dasd_reserve_req->ccw;
+ cqr->data = &dasd_reserve_req->data;
+ cqr->magic = DASD_ECKD_MAGIC;
}
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_SLCK;
rc = dasd_sleep_on_immediatly(cqr);
- dasd_sfree_request(cqr, cqr->memdev);
+ if (useglobal)
+ mutex_unlock(&dasd_reserve_mutex);
+ else
+ dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
int ret;
ASCEBC(dasd_eckd_discipline.ebcname, 4);
+ dasd_reserve_req = kmalloc(sizeof(*dasd_reserve_req),
+ GFP_KERNEL | GFP_DMA);
+ if (!dasd_reserve_req)
+ return -ENOMEM;
ret = ccw_driver_register(&dasd_eckd_driver);
if (!ret)
wait_for_device_probe();
-
+ else
+ kfree(dasd_reserve_req);
return ret;
}
dasd_eckd_cleanup(void)
{
ccw_driver_unregister(&dasd_eckd_driver);
+ kfree(dasd_reserve_req);
}
module_init(dasd_eckd_init);
__u8 identifier:2;
__u8 reserved:6;
} __attribute__ ((packed)) flags;
- __u8 reserved[7];
+ __u8 reserved[5];
+ struct {
+ __u8 value:2;
+ __u8 number:6;
+ } __attribute__ ((packed)) timeout;
+ __u8 reserved3;
__u16 subsystemID;
__u8 reserved2[22];
} __attribute__ ((packed));
return rc;
}
+ device->default_expires = DASD_EXPIRES;
+
readonly = dasd_device_is_ro(device);
if (readonly)
set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
cqr->startdev = memdev;
cqr->memdev = memdev;
cqr->block = block;
- cqr->expires = 5 * 60 * HZ; /* 5 minutes */
+ cqr->expires = memdev->default_expires * HZ; /* default 5 minutes */
cqr->retries = 32;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
/* ... and how */
unsigned long starttime; /* jiffies time of request start */
- int expires; /* expiration period in jiffies */
+ unsigned long expires; /* expiration period in jiffies */
char lpm; /* logical path mask */
void *data; /* pointer to data area */
#define DASD_CQR_CLEARED 0x84 /* request was cleared */
#define DASD_CQR_SUCCESS 0x85 /* request was successful */
+/* default expiration time*/
+#define DASD_EXPIRES 300
+#define DASD_EXPIRES_MAX 40000000
/* per dasd_ccw_req flags */
#define DASD_CQR_FLAGS_USE_ERP 0 /* use ERP for this request */
/* hook for alias management */
struct list_head alias_list;
+
+ /* default expiration time in s */
+ unsigned long default_expires;
};
struct dasd_block {
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
struct dcssblk_dev_info *dev_info;
int rc;
+ lock_kernel();
dev_info = bdev->bd_disk->private_data;
if (NULL == dev_info) {
rc = -ENODEV;
bdev->bd_block_size = 4096;
rc = 0;
out:
+ unlock_kernel();
return rc;
}
struct segment_info *entry;
int rc;
+ lock_kernel();
if (!dev_info) {
rc = -ENODEV;
goto out;
up_write(&dcssblk_devices_sem);
rc = 0;
out:
+ unlock_kernel();
return rc;
}
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/buffer_head.h>
#include <linux/kernel.h>
struct tape_device * device;
int rc;
+ lock_kernel();
device = tape_get_device(disk->private_data);
if (device->required_tapemarks) {
* is called.
*/
tape_state_set(device, TS_BLKUSE);
+ unlock_kernel();
return 0;
release:
tape_release(device);
put_device:
tape_put_device(device);
+ unlock_kernel();
return rc;
}
tapeblock_release(struct gendisk *disk, fmode_t mode)
{
struct tape_device *device = disk->private_data;
-
+
+ lock_kernel();
tape_state_set(device, TS_IN_USE);
tape_release(device);
tape_put_device(device);
+ unlock_kernel();
return 0;
}
{
struct ccw_request *req = &cdev->private->req;
+ if (!req->singlepath) {
+ req->mask = 0;
+ goto out;
+ }
req->retries = req->maxretries;
req->mask = lpm_adjust(req->mask >>= 1, req->lpm);
-
+out:
return req->mask;
}
{
struct ccw_request *req = &cdev->private->req;
- /* Try all paths twice to counter link flapping. */
- req->mask = 0x8080;
+ if (req->singlepath) {
+ /* Try all paths twice to counter link flapping. */
+ req->mask = 0x8080;
+ } else
+ req->mask = req->lpm;
+
req->retries = req->maxretries;
req->mask = lpm_adjust(req->mask, req->lpm);
req->drc = 0;
/* Ask the driver what to do */
if (cdev->drv && cdev->drv->uc_handler) {
todo = cdev->drv->uc_handler(cdev, lcirb);
+ CIO_TRACE_EVENT(2, "uc_response");
+ CIO_HEX_EVENT(2, &todo, sizeof(todo));
switch (todo) {
case UC_TODO_RETRY:
return IO_STATUS_ERROR;
#include "chsc.h"
static void *sei_page;
+static DEFINE_SPINLOCK(siosl_lock);
static DEFINE_SPINLOCK(sda_lock);
/**
case 0x0007:
case 0x0008:
case 0x000a:
+ case 0x0104:
return -EINVAL;
case 0x0004:
return -EOPNOTSUPP;
return (rr->response.code == 0x0001) ? 0 : -EIO;
}
+static struct {
+ struct chsc_header request;
+ u32 word1;
+ struct subchannel_id sid;
+ u32 word3;
+ struct chsc_header response;
+ u32 word[11];
+} __attribute__ ((packed)) siosl_area __attribute__ ((__aligned__(PAGE_SIZE)));
+
+int chsc_siosl(struct subchannel_id schid)
+{
+ unsigned long flags;
+ int ccode;
+ int rc;
+
+ spin_lock_irqsave(&siosl_lock, flags);
+ memset(&siosl_area, 0, sizeof(siosl_area));
+ siosl_area.request.length = 0x0010;
+ siosl_area.request.code = 0x0046;
+ siosl_area.word1 = 0x80000000;
+ siosl_area.sid = schid;
+
+ ccode = chsc(&siosl_area);
+ if (ccode > 0) {
+ if (ccode == 3)
+ rc = -ENODEV;
+ else
+ rc = -EBUSY;
+ CIO_MSG_EVENT(2, "chsc: chsc failed for 0.%x.%04x (ccode=%d)\n",
+ schid.ssid, schid.sch_no, ccode);
+ goto out;
+ }
+ rc = chsc_error_from_response(siosl_area.response.code);
+ if (rc)
+ CIO_MSG_EVENT(2, "chsc: siosl failed for 0.%x.%04x (rc=%04x)\n",
+ schid.ssid, schid.sch_no,
+ siosl_area.response.code);
+ else
+ CIO_MSG_EVENT(4, "chsc: siosl succeeded for 0.%x.%04x\n",
+ schid.ssid, schid.sch_no);
+out:
+ spin_unlock_irqrestore(&siosl_lock, flags);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(chsc_siosl);
int chsc_error_from_response(int response);
+int chsc_siosl(struct subchannel_id schid);
+
#endif
#include "ioasm.h"
#include "io_sch.h"
#include "blacklist.h"
+#include "chsc.h"
static struct timer_list recovery_timer;
static DEFINE_SPINLOCK(recovery_lock);
spin_lock_irq(cdev->ccwlock);
ccw_device_sched_todo(cdev, CDEV_TODO_UNREG_EVAL);
spin_unlock_irq(cdev->ccwlock);
- } else if (cdev->online && cdev->drv && cdev->drv->set_offline)
+ return 0;
+ }
+ if (cdev->drv && cdev->drv->set_offline)
return ccw_device_set_offline(cdev);
- return 0;
+ return -EINVAL;
}
static int online_store_recog_and_online(struct ccw_device *cdev)
return -EAGAIN;
}
if (cdev->drv && cdev->drv->set_online)
- ccw_device_set_online(cdev);
- return 0;
+ return ccw_device_set_online(cdev);
+ return -EINVAL;
}
static int online_store_handle_online(struct ccw_device *cdev, int force)
}
}
+static ssize_t
+initiate_logging(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct subchannel *sch = to_subchannel(dev);
+ int rc;
+
+ rc = chsc_siosl(sch->schid);
+ if (rc < 0) {
+ pr_warning("Logging for subchannel 0.%x.%04x failed with "
+ "errno=%d\n",
+ sch->schid.ssid, sch->schid.sch_no, rc);
+ return rc;
+ }
+ pr_notice("Logging for subchannel 0.%x.%04x was triggered\n",
+ sch->schid.ssid, sch->schid.sch_no);
+ return count;
+}
+
static DEVICE_ATTR(chpids, 0444, chpids_show, NULL);
static DEVICE_ATTR(pimpampom, 0444, pimpampom_show, NULL);
static DEVICE_ATTR(devtype, 0444, devtype_show, NULL);
static DEVICE_ATTR(modalias, 0444, modalias_show, NULL);
static DEVICE_ATTR(online, 0644, online_show, online_store);
static DEVICE_ATTR(availability, 0444, available_show, NULL);
+static DEVICE_ATTR(logging, 0200, NULL, initiate_logging);
static struct attribute *io_subchannel_attrs[] = {
&dev_attr_chpids.attr,
&dev_attr_pimpampom.attr,
+ &dev_attr_logging.attr,
NULL,
};
}
}
+/**
+ * ccw_device_siosl() - initiate logging
+ * @cdev: ccw device
+ *
+ * This function is used to invoke model-dependent logging within the channel
+ * subsystem.
+ */
+int ccw_device_siosl(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+
+ return chsc_siosl(sch->schid);
+}
+EXPORT_SYMBOL_GPL(ccw_device_siosl);
+
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(ccw_device_set_online);
EXPORT_SYMBOL(ccw_device_set_offline);
req->timeout = PGID_TIMEOUT;
req->maxretries = PGID_RETRIES;
req->lpm = 0x80;
+ req->singlepath = 1;
req->callback = spid_callback;
spid_do(cdev);
}
req->timeout = PGID_TIMEOUT;
req->maxretries = PGID_RETRIES;
req->lpm = 0x80;
+ req->singlepath = 1;
if (cdev->private->flags.pgroup) {
CIO_TRACE_EVENT(4, "snid");
CIO_HEX_EVENT(4, devid, sizeof(*devid));
req->timeout = PGID_TIMEOUT;
req->maxretries = PGID_RETRIES;
req->lpm = sch->schib.pmcw.pam & sch->opm;
+ req->singlepath = 1;
req->callback = disband_callback;
fn = SPID_FUNC_DISBAND;
if (cdev->private->flags.mpath)
* @filter: optional callback to adjust request status based on IRB data
* @callback: final callback
* @data: user-defined pointer passed to all callbacks
+ * @singlepath: if set, use only one path from @lpm per start I/O
+ * @cancel: non-zero if request was cancelled
+ * @done: non-zero if request was finished
* @mask: current path mask
* @retries: current number of retries
* @drc: delayed return code
- * @cancel: non-zero if request was cancelled
- * @done: non-zero if request was finished
*/
struct ccw_request {
struct ccw1 *cp;
enum io_status);
void (*callback)(struct ccw_device *, void *, int);
void *data;
+ unsigned int singlepath:1;
/* These fields are used internally. */
+ unsigned int cancel:1;
+ unsigned int done:1;
u16 mask;
u16 retries;
int drc;
- int cancel:1;
- int done:1;
} __attribute__((packed));
/*
struct chbk *p_ch;
CLAW_DBF_TEXT(4, trace, "claw_tx");
- p_ch=&privptr->channel[WRITE];
+ p_ch = &privptr->channel[WRITE_CHANNEL];
spin_lock_irqsave(get_ccwdev_lock(p_ch->cdev), saveflags);
rc=claw_hw_tx( skb, dev, 1 );
spin_unlock_irqrestore(get_ccwdev_lock(p_ch->cdev), saveflags);
claw_pack_skb(struct claw_privbk *privptr)
{
struct sk_buff *new_skb,*held_skb;
- struct chbk *p_ch = &privptr->channel[WRITE];
+ struct chbk *p_ch = &privptr->channel[WRITE_CHANNEL];
struct claw_env *p_env = privptr->p_env;
int pkt_cnt,pk_ind,so_far;
privptr->p_env->write_size=CLAW_FRAME_SIZE;
}
claw_set_busy(dev);
- tasklet_init(&privptr->channel[READ].tasklet, claw_irq_tasklet,
- (unsigned long) &privptr->channel[READ]);
+ tasklet_init(&privptr->channel[READ_CHANNEL].tasklet, claw_irq_tasklet,
+ (unsigned long) &privptr->channel[READ_CHANNEL]);
for ( i = 0; i < 2; i++) {
CLAW_DBF_TEXT_(2, trace, "opn_ch%d", i);
init_waitqueue_head(&privptr->channel[i].wait);
/* skb_queue_head_init(&p_ch->io_queue); */
- if (i == WRITE)
+ if (i == WRITE_CHANNEL)
skb_queue_head_init(
- &privptr->channel[WRITE].collect_queue);
+ &privptr->channel[WRITE_CHANNEL].collect_queue);
privptr->channel[i].flag_a = 0;
privptr->channel[i].IO_active = 0;
privptr->channel[i].flag &= ~CLAW_TIMER;
if((privptr->channel[i].flag & CLAW_TIMER) == 0x00)
del_timer(&timer);
}
- if ((((privptr->channel[READ].last_dstat |
- privptr->channel[WRITE].last_dstat) &
+ if ((((privptr->channel[READ_CHANNEL].last_dstat |
+ privptr->channel[WRITE_CHANNEL].last_dstat) &
~(DEV_STAT_CHN_END | DEV_STAT_DEV_END)) != 0x00) ||
- (((privptr->channel[READ].flag |
- privptr->channel[WRITE].flag) & CLAW_TIMER) != 0x00)) {
- dev_info(&privptr->channel[READ].cdev->dev,
+ (((privptr->channel[READ_CHANNEL].flag |
+ privptr->channel[WRITE_CHANNEL].flag) & CLAW_TIMER) != 0x00)) {
+ dev_info(&privptr->channel[READ_CHANNEL].cdev->dev,
"%s: remote side is not ready\n", dev->name);
CLAW_DBF_TEXT(2, trace, "notrdy");
}
}
privptr->buffs_alloc = 0;
- privptr->channel[READ].flag= 0x00;
- privptr->channel[WRITE].flag = 0x00;
+ privptr->channel[READ_CHANNEL].flag = 0x00;
+ privptr->channel[WRITE_CHANNEL].flag = 0x00;
privptr->p_buff_ccw=NULL;
privptr->p_buff_read=NULL;
privptr->p_buff_write=NULL;
}
/* Try to extract channel from driver data. */
- if (privptr->channel[READ].cdev == cdev)
- p_ch = &privptr->channel[READ];
- else if (privptr->channel[WRITE].cdev == cdev)
- p_ch = &privptr->channel[WRITE];
+ if (privptr->channel[READ_CHANNEL].cdev == cdev)
+ p_ch = &privptr->channel[READ_CHANNEL];
+ else if (privptr->channel[WRITE_CHANNEL].cdev == cdev)
+ p_ch = &privptr->channel[WRITE_CHANNEL];
else {
dev_warn(&cdev->dev, "The device is not a CLAW device\n");
CLAW_DBF_TEXT(2, trace, "badchan");
claw_clearbit_busy(TB_TX, dev);
claw_clear_busy(dev);
}
- p_ch_r = (struct chbk *)&privptr->channel[READ];
+ p_ch_r = (struct chbk *)&privptr->channel[READ_CHANNEL];
if (test_and_set_bit(CLAW_BH_ACTIVE,
(void *)&p_ch_r->flag_a) == 0)
tasklet_schedule(&p_ch_r->tasklet);
for ( i = 1; i >=0 ; i--) {
spin_lock_irqsave(
get_ccwdev_lock(privptr->channel[i].cdev), saveflags);
- /* del_timer(&privptr->channel[READ].timer); */
+ /* del_timer(&privptr->channel[READ_CHANNEL].timer); */
privptr->channel[i].claw_state = CLAW_STOP;
privptr->channel[i].IO_active = 0;
parm = (unsigned long) &privptr->channel[i];
- if (i == WRITE)
+ if (i == WRITE_CHANNEL)
claw_purge_skb_queue(
- &privptr->channel[WRITE].collect_queue);
+ &privptr->channel[WRITE_CHANNEL].collect_queue);
rc = ccw_device_halt (privptr->channel[i].cdev, parm);
if (privptr->system_validate_comp==0x00) /* never opened? */
init_waitqueue_head(&privptr->channel[i].wait);
privptr->mtc_skipping = 1;
privptr->mtc_offset=0;
- if (((privptr->channel[READ].last_dstat |
- privptr->channel[WRITE].last_dstat) &
+ if (((privptr->channel[READ_CHANNEL].last_dstat |
+ privptr->channel[WRITE_CHANNEL].last_dstat) &
~(DEV_STAT_CHN_END | DEV_STAT_DEV_END)) != 0x00) {
- dev_warn(&privptr->channel[READ].cdev->dev,
+ dev_warn(&privptr->channel[READ_CHANNEL].cdev->dev,
"Deactivating %s completed with incorrect"
" subchannel status "
"(read %02x, write %02x)\n",
dev->name,
- privptr->channel[READ].last_dstat,
- privptr->channel[WRITE].last_dstat);
+ privptr->channel[READ_CHANNEL].last_dstat,
+ privptr->channel[WRITE_CHANNEL].last_dstat);
CLAW_DBF_TEXT(2, trace, "badclose");
}
CLAW_DBF_TEXT(4, trace, "rlsexit");
CLAW_DBF_TEXT(4, trace, "hw_tx");
privptr = (struct claw_privbk *)(dev->ml_priv);
- p_ch=(struct chbk *)&privptr->channel[WRITE];
+ p_ch = (struct chbk *)&privptr->channel[WRITE_CHANNEL];
p_env =privptr->p_env;
claw_free_wrt_buf(dev); /* Clean up free chain if posible */
/* scan the write queue to free any completed write packets */
claw_strt_out_IO(dev );
claw_free_wrt_buf( dev );
if (privptr->write_free_count==0) {
- ch = &privptr->channel[WRITE];
+ ch = &privptr->channel[WRITE_CHANNEL];
atomic_inc(&skb->users);
skb_queue_tail(&ch->collect_queue, skb);
goto Done;
}
/* tx lock */
if (claw_test_and_setbit_busy(TB_TX,dev)) { /* set to busy */
- ch = &privptr->channel[WRITE];
+ ch = &privptr->channel[WRITE_CHANNEL];
atomic_inc(&skb->users);
skb_queue_tail(&ch->collect_queue, skb);
claw_strt_out_IO(dev );
privptr->p_write_free_chain == NULL ) {
claw_setbit_busy(TB_NOBUFFER,dev);
- ch = &privptr->channel[WRITE];
+ ch = &privptr->channel[WRITE_CHANNEL];
atomic_inc(&skb->users);
skb_queue_tail(&ch->collect_queue, skb);
CLAW_DBF_TEXT(2, trace, "clawbusy");
while (len_of_data > 0) {
p_this_ccw=privptr->p_write_free_chain; /* get a block */
if (p_this_ccw == NULL) { /* lost the race */
- ch = &privptr->channel[WRITE];
+ ch = &privptr->channel[WRITE_CHANNEL];
atomic_inc(&skb->users);
skb_queue_tail(&ch->collect_queue, skb);
goto Done2;
*catch up to each other */
privptr = dev->ml_priv;
p_env=privptr->p_env;
- tdev = &privptr->channel[READ].cdev->dev;
+ tdev = &privptr->channel[READ_CHANNEL].cdev->dev;
memcpy( &temp_host_name, p_env->host_name, 8);
memcpy( &temp_ws_name, p_env->adapter_name , 8);
dev_info(tdev, "%s: CLAW device %.8s: "
dev->name, temp_ws_name,
p_ctlbk->linkid);
privptr->active_link_ID = p_ctlbk->linkid;
- p_ch = &privptr->channel[WRITE];
+ p_ch = &privptr->channel[WRITE_CHANNEL];
wake_up(&p_ch->wait); /* wake up claw_open ( WRITE) */
break;
case CONNECTION_RESPONSE:
"%s: Confirmed Now packing\n", dev->name);
p_env->packing = DO_PACKED;
}
- p_ch = &privptr->channel[WRITE];
+ p_ch = &privptr->channel[WRITE_CHANNEL];
wake_up(&p_ch->wait);
} else {
dev_warn(tdev, "Activating %s failed because of"
p_packd=NULL;
privptr = dev->ml_priv;
- p_dev = &privptr->channel[READ].cdev->dev;
+ p_dev = &privptr->channel[READ_CHANNEL].cdev->dev;
p_env = privptr->p_env;
p_this_ccw=privptr->p_read_active_first;
while (p_this_ccw!=NULL && p_this_ccw->header.flag!=CLAW_PENDING) {
struct ccwbk*p_ccwbk;
struct chbk *p_ch;
struct clawh *p_clawh;
- p_ch=&privptr->channel[READ];
+ p_ch = &privptr->channel[READ_CHANNEL];
CLAW_DBF_TEXT(4, trace, "StRdNter");
p_clawh=(struct clawh *)privptr->p_claw_signal_blk;
return;
}
privptr = (struct claw_privbk *)dev->ml_priv;
- p_ch=&privptr->channel[WRITE];
+ p_ch = &privptr->channel[WRITE_CHANNEL];
CLAW_DBF_TEXT(4, trace, "strt_io");
p_first_ccw=privptr->p_write_active_first;
if (dev->flags & IFF_RUNNING)
claw_release(dev);
if (privptr) {
- privptr->channel[READ].ndev = NULL; /* say it's free */
+ privptr->channel[READ_CHANNEL].ndev = NULL; /* say it's free */
}
dev->ml_priv = NULL;
#ifdef MODULE
struct ccw_dev_id dev_id;
dev_info(&cgdev->dev, "add for %s\n",
- dev_name(&cgdev->cdev[READ]->dev));
+ dev_name(&cgdev->cdev[READ_CHANNEL]->dev));
CLAW_DBF_TEXT(2, setup, "new_dev");
privptr = dev_get_drvdata(&cgdev->dev);
- dev_set_drvdata(&cgdev->cdev[READ]->dev, privptr);
- dev_set_drvdata(&cgdev->cdev[WRITE]->dev, privptr);
+ dev_set_drvdata(&cgdev->cdev[READ_CHANNEL]->dev, privptr);
+ dev_set_drvdata(&cgdev->cdev[WRITE_CHANNEL]->dev, privptr);
if (!privptr)
return -ENODEV;
p_env = privptr->p_env;
- ccw_device_get_id(cgdev->cdev[READ], &dev_id);
- p_env->devno[READ] = dev_id.devno;
- ccw_device_get_id(cgdev->cdev[WRITE], &dev_id);
- p_env->devno[WRITE] = dev_id.devno;
+ ccw_device_get_id(cgdev->cdev[READ_CHANNEL], &dev_id);
+ p_env->devno[READ_CHANNEL] = dev_id.devno;
+ ccw_device_get_id(cgdev->cdev[WRITE_CHANNEL], &dev_id);
+ p_env->devno[WRITE_CHANNEL] = dev_id.devno;
ret = add_channel(cgdev->cdev[0],0,privptr);
if (ret == 0)
ret = add_channel(cgdev->cdev[1],1,privptr);
" failed with error code %d\n", ret);
goto out;
}
- ret = ccw_device_set_online(cgdev->cdev[READ]);
+ ret = ccw_device_set_online(cgdev->cdev[READ_CHANNEL]);
if (ret != 0) {
dev_warn(&cgdev->dev,
"Setting the read subchannel online"
" failed with error code %d\n", ret);
goto out;
}
- ret = ccw_device_set_online(cgdev->cdev[WRITE]);
+ ret = ccw_device_set_online(cgdev->cdev[WRITE_CHANNEL]);
if (ret != 0) {
dev_warn(&cgdev->dev,
"Setting the write subchannel online "
}
dev->ml_priv = privptr;
dev_set_drvdata(&cgdev->dev, privptr);
- dev_set_drvdata(&cgdev->cdev[READ]->dev, privptr);
- dev_set_drvdata(&cgdev->cdev[WRITE]->dev, privptr);
+ dev_set_drvdata(&cgdev->cdev[READ_CHANNEL]->dev, privptr);
+ dev_set_drvdata(&cgdev->cdev[WRITE_CHANNEL]->dev, privptr);
/* sysfs magic */
SET_NETDEV_DEV(dev, &cgdev->dev);
if (register_netdev(dev) != 0) {
goto out;
}
}
- privptr->channel[READ].ndev = dev;
- privptr->channel[WRITE].ndev = dev;
+ privptr->channel[READ_CHANNEL].ndev = dev;
+ privptr->channel[WRITE_CHANNEL].ndev = dev;
privptr->p_env->ndev = dev;
dev_info(&cgdev->dev, "%s:readsize=%d writesize=%d "
"readbuffer=%d writebuffer=%d read=0x%04x write=0x%04x\n",
dev->name, p_env->read_size,
p_env->write_size, p_env->read_buffers,
- p_env->write_buffers, p_env->devno[READ],
- p_env->devno[WRITE]);
+ p_env->write_buffers, p_env->devno[READ_CHANNEL],
+ p_env->devno[WRITE_CHANNEL]);
dev_info(&cgdev->dev, "%s:host_name:%.8s, adapter_name "
":%.8s api_type: %.8s\n",
dev->name, p_env->host_name,
priv = dev_get_drvdata(&cgdev->dev);
if (!priv)
return -ENODEV;
- ndev = priv->channel[READ].ndev;
+ ndev = priv->channel[READ_CHANNEL].ndev;
if (ndev) {
/* Close the device */
- dev_info(&cgdev->dev, "%s: shutting down \n",
+ dev_info(&cgdev->dev, "%s: shutting down\n",
ndev->name);
if (ndev->flags & IFF_RUNNING)
ret = claw_release(ndev);
unregister_netdev(ndev);
ndev->ml_priv = NULL; /* cgdev data, not ndev's to free */
claw_free_netdevice(ndev, 1);
- priv->channel[READ].ndev = NULL;
- priv->channel[WRITE].ndev = NULL;
+ priv->channel[READ_CHANNEL].ndev = NULL;
+ priv->channel[WRITE_CHANNEL].ndev = NULL;
priv->p_env->ndev = NULL;
}
ccw_device_set_offline(cgdev->cdev[1]);
priv->channel[1].irb=NULL;
kfree(priv);
dev_set_drvdata(&cgdev->dev, NULL);
- dev_set_drvdata(&cgdev->cdev[READ]->dev, NULL);
- dev_set_drvdata(&cgdev->cdev[WRITE]->dev, NULL);
+ dev_set_drvdata(&cgdev->cdev[READ_CHANNEL]->dev, NULL);
+ dev_set_drvdata(&cgdev->cdev[WRITE_CHANNEL]->dev, NULL);
put_device(&cgdev->dev);
return;
#define MAX_ENVELOPE_SIZE 65536
#define CLAW_DEFAULT_MTU_SIZE 4096
#define DEF_PACK_BUFSIZE 32768
-#define READ 0
-#define WRITE 1
+#define READ_CHANNEL 0
+#define WRITE_CHANNEL 1
#define TB_TX 0 /* sk buffer handling in process */
#define TB_STOP 1 /* network device stop in process */
if ((fsmstate == CTC_STATE_SETUPWAIT) &&
(ch->protocol == CTCM_PROTO_OS390)) {
/* OS/390 resp. z/OS */
- if (CHANNEL_DIRECTION(ch->flags) == READ) {
+ if (CHANNEL_DIRECTION(ch->flags) == CTCM_READ) {
*((__u16 *)ch->trans_skb->data) = CTCM_INITIAL_BLOCKLEN;
fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC,
CTC_EVENT_TIMER, ch);
* if in compatibility mode, since VM TCP delays the initial
* frame until it has some data to send.
*/
- if ((CHANNEL_DIRECTION(ch->flags) == WRITE) ||
+ if ((CHANNEL_DIRECTION(ch->flags) == CTCM_WRITE) ||
(ch->protocol != CTCM_PROTO_S390))
fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, ch);
*((__u16 *)ch->trans_skb->data) = CTCM_INITIAL_BLOCKLEN;
ch->ccw[1].count = 2; /* Transfer only length */
- fsm_newstate(fi, (CHANNEL_DIRECTION(ch->flags) == READ)
+ fsm_newstate(fi, (CHANNEL_DIRECTION(ch->flags) == CTCM_READ)
? CTC_STATE_RXINIT : CTC_STATE_TXINIT);
rc = ccw_device_start(ch->cdev, &ch->ccw[0],
(unsigned long)ch, 0xff, 0);
* reply from VM TCP which brings up the RX channel to it's
* final state.
*/
- if ((CHANNEL_DIRECTION(ch->flags) == READ) &&
+ if ((CHANNEL_DIRECTION(ch->flags) == CTCM_READ) &&
(ch->protocol == CTCM_PROTO_S390)) {
struct net_device *dev = ch->netdev;
struct ctcm_priv *priv = dev->ml_priv;
int rc;
CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, "%s(%s): %s",
- CTCM_FUNTAIL, ch->id,
- (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX");
+ CTCM_FUNTAIL, ch->id,
+ (CHANNEL_DIRECTION(ch->flags) == CTCM_READ) ? "RX" : "TX");
if (ch->trans_skb != NULL) {
clear_normalized_cda(&ch->ccw[1]);
dev_kfree_skb(ch->trans_skb);
ch->trans_skb = NULL;
}
- if (CHANNEL_DIRECTION(ch->flags) == READ) {
+ if (CHANNEL_DIRECTION(ch->flags) == CTCM_READ) {
ch->ccw[1].cmd_code = CCW_CMD_READ;
ch->ccw[1].flags = CCW_FLAG_SLI;
ch->ccw[1].count = 0;
"%s(%s): %s trans_skb alloc delayed "
"until first transfer",
CTCM_FUNTAIL, ch->id,
- (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX");
+ (CHANNEL_DIRECTION(ch->flags) == CTCM_READ) ?
+ "RX" : "TX");
}
ch->ccw[0].cmd_code = CCW_CMD_PREPARE;
ch->ccw[0].flags = CCW_FLAG_SLI | CCW_FLAG_CC;
ch->th_seg = 0x00;
ch->th_seq_num = 0x00;
- if (CHANNEL_DIRECTION(ch->flags) == READ) {
+ if (CHANNEL_DIRECTION(ch->flags) == CTCM_READ) {
skb_queue_purge(&ch->io_queue);
fsm_event(priv->fsm, DEV_EVENT_RXDOWN, dev);
} else {
fsm_newstate(fi, CTC_STATE_STARTRETRY);
fsm_deltimer(&ch->timer);
fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, ch);
- if (!IS_MPC(ch) && (CHANNEL_DIRECTION(ch->flags) == READ)) {
+ if (!IS_MPC(ch) &&
+ (CHANNEL_DIRECTION(ch->flags) == CTCM_READ)) {
int rc = ccw_device_halt(ch->cdev, (unsigned long)ch);
if (rc != 0)
ctcm_ccw_check_rc(ch, rc,
CTCM_DBF_TEXT_(ERROR, CTC_DBF_CRIT,
"%s(%s) : %s error during %s channel setup state=%s\n",
CTCM_FUNTAIL, dev->name, ctc_ch_event_names[event],
- (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX",
+ (CHANNEL_DIRECTION(ch->flags) == CTCM_READ) ? "RX" : "TX",
fsm_getstate_str(fi));
- if (CHANNEL_DIRECTION(ch->flags) == READ) {
+ if (CHANNEL_DIRECTION(ch->flags) == CTCM_READ) {
fsm_newstate(fi, CTC_STATE_RXERR);
fsm_event(priv->fsm, DEV_EVENT_RXDOWN, dev);
} else {
fsm_event(priv->fsm, DEV_EVENT_TXDOWN, dev);
fsm_newstate(fi, CTC_STATE_DTERM);
- ch2 = priv->channel[WRITE];
+ ch2 = priv->channel[CTCM_WRITE];
fsm_newstate(ch2->fsm, CTC_STATE_DTERM);
ccw_device_halt(ch->cdev, (unsigned long)ch);
fsm_deltimer(&ch->timer);
CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
"%s: %s: %s unrecoverable channel error",
- CTCM_FUNTAIL, ch->id, rd == READ ? "RX" : "TX");
+ CTCM_FUNTAIL, ch->id, rd == CTCM_READ ? "RX" : "TX");
if (IS_MPC(ch)) {
priv->stats.tx_dropped++;
priv->stats.tx_errors++;
}
- if (rd == READ) {
+ if (rd == CTCM_READ) {
fsm_newstate(fi, CTC_STATE_RXERR);
fsm_event(priv->fsm, DEV_EVENT_RXDOWN, dev);
} else {
switch (fsm_getstate(fi)) {
case CTC_STATE_STARTRETRY:
case CTC_STATE_SETUPWAIT:
- if (CHANNEL_DIRECTION(ch->flags) == READ) {
+ if (CHANNEL_DIRECTION(ch->flags) == CTCM_READ) {
ctcmpc_chx_rxidle(fi, event, arg);
} else {
fsm_newstate(fi, CTC_STATE_TXIDLE);
break;
};
- fsm_newstate(fi, (CHANNEL_DIRECTION(ch->flags) == READ)
+ fsm_newstate(fi, (CHANNEL_DIRECTION(ch->flags) == CTCM_READ)
? CTC_STATE_RXINIT : CTC_STATE_TXINIT);
done:
struct net_device *dev = ach->netdev;
struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
- struct channel *wch = priv->channel[WRITE];
- struct channel *rch = priv->channel[READ];
+ struct channel *wch = priv->channel[CTCM_WRITE];
+ struct channel *rch = priv->channel[CTCM_READ];
struct sk_buff *skb;
struct th_sweep *header;
int rc = 0;
fsm_newstate(fi, DEV_STATE_STARTWAIT_RXTX);
if (IS_MPC(priv))
priv->mpcg->channels_terminating = 0;
- for (direction = READ; direction <= WRITE; direction++) {
+ for (direction = CTCM_READ; direction <= CTCM_WRITE; direction++) {
struct channel *ch = priv->channel[direction];
fsm_event(ch->fsm, CTC_EVENT_START, ch);
}
CTCMY_DBF_DEV_NAME(SETUP, dev, "");
fsm_newstate(fi, DEV_STATE_STOPWAIT_RXTX);
- for (direction = READ; direction <= WRITE; direction++) {
+ for (direction = CTCM_READ; direction <= CTCM_WRITE; direction++) {
struct channel *ch = priv->channel[direction];
fsm_event(ch->fsm, CTC_EVENT_STOP, ch);
ch->th_seq_num = 0x00;
if (IS_MPC(priv)) {
if (event == DEV_EVENT_RXUP)
- mpc_channel_action(priv->channel[READ],
- READ, MPC_CHANNEL_ADD);
+ mpc_channel_action(priv->channel[CTCM_READ],
+ CTCM_READ, MPC_CHANNEL_ADD);
else
- mpc_channel_action(priv->channel[WRITE],
- WRITE, MPC_CHANNEL_ADD);
+ mpc_channel_action(priv->channel[CTCM_WRITE],
+ CTCM_WRITE, MPC_CHANNEL_ADD);
}
}
}
if (IS_MPC(priv)) {
if (event == DEV_EVENT_RXDOWN)
- mpc_channel_action(priv->channel[READ],
- READ, MPC_CHANNEL_REMOVE);
+ mpc_channel_action(priv->channel[CTCM_READ],
+ CTCM_READ, MPC_CHANNEL_REMOVE);
else
- mpc_channel_action(priv->channel[WRITE],
- WRITE, MPC_CHANNEL_REMOVE);
+ mpc_channel_action(priv->channel[CTCM_WRITE],
+ CTCM_WRITE, MPC_CHANNEL_REMOVE);
}
}
else {
ch->flags |= CHANNEL_FLAGS_INUSE;
ch->flags &= ~CHANNEL_FLAGS_RWMASK;
- ch->flags |= (direction == WRITE)
+ ch->flags |= (direction == CTCM_WRITE)
? CHANNEL_FLAGS_WRITE : CHANNEL_FLAGS_READ;
fsm_newstate(ch->fsm, CTC_STATE_STOPPED);
}
CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
"%s(%s): %s trans_skb allocation error",
CTCM_FUNTAIL, ch->id,
- (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX");
+ (CHANNEL_DIRECTION(ch->flags) == CTCM_READ) ?
+ "RX" : "TX");
return -ENOMEM;
}
CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
"%s(%s): %s set norm_cda failed",
CTCM_FUNTAIL, ch->id,
- (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX");
+ (CHANNEL_DIRECTION(ch->flags) == CTCM_READ) ?
+ "RX" : "TX");
return -ENOMEM;
}
priv = dev->ml_priv;
grp = priv->mpcg;
- ch = priv->channel[WRITE];
+ ch = priv->channel[CTCM_WRITE];
/* sweep processing is not complete until response and request */
/* has completed for all read channels in group */
if (grp->in_sweep == 0) {
grp->in_sweep = 1;
- grp->sweep_rsp_pend_num = grp->active_channels[READ];
- grp->sweep_req_pend_num = grp->active_channels[READ];
+ grp->sweep_rsp_pend_num = grp->active_channels[CTCM_READ];
+ grp->sweep_req_pend_num = grp->active_channels[CTCM_READ];
}
sweep_skb = __dev_alloc_skb(MPC_BUFSIZE_DEFAULT, GFP_ATOMIC|GFP_DMA);
return NETDEV_TX_BUSY;
dev->trans_start = jiffies;
- if (ctcm_transmit_skb(priv->channel[WRITE], skb) != 0)
+ if (ctcm_transmit_skb(priv->channel[CTCM_WRITE], skb) != 0)
return NETDEV_TX_BUSY;
return NETDEV_TX_OK;
}
}
dev->trans_start = jiffies;
- if (ctcmpc_transmit_skb(priv->channel[WRITE], skb) != 0) {
+ if (ctcmpc_transmit_skb(priv->channel[CTCM_WRITE], skb) != 0) {
CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
"%s(%s): device error - dropped",
CTCM_FUNTAIL, dev->name);
return -EINVAL;
priv = dev->ml_priv;
- max_bufsize = priv->channel[READ]->max_bufsize;
+ max_bufsize = priv->channel[CTCM_READ]->max_bufsize;
if (IS_MPC(priv)) {
if (new_mtu > max_bufsize - TH_HEADER_LENGTH)
priv = dev_get_drvdata(&cgdev->dev);
/* Try to extract channel from driver data. */
- if (priv->channel[READ]->cdev == cdev)
- ch = priv->channel[READ];
- else if (priv->channel[WRITE]->cdev == cdev)
- ch = priv->channel[WRITE];
+ if (priv->channel[CTCM_READ]->cdev == cdev)
+ ch = priv->channel[CTCM_READ];
+ else if (priv->channel[CTCM_WRITE]->cdev == cdev)
+ ch = priv->channel[CTCM_WRITE];
else {
dev_err(&cdev->dev,
"%s: Internal error: Can't determine channel for "
goto out_ccw2;
}
- for (direction = READ; direction <= WRITE; direction++) {
+ for (direction = CTCM_READ; direction <= CTCM_WRITE; direction++) {
priv->channel[direction] =
- channel_get(type, direction == READ ? read_id : write_id,
- direction);
+ channel_get(type, direction == CTCM_READ ?
+ read_id : write_id, direction);
if (priv->channel[direction] == NULL) {
- if (direction == WRITE)
- channel_free(priv->channel[READ]);
+ if (direction == CTCM_WRITE)
+ channel_free(priv->channel[CTCM_READ]);
goto out_dev;
}
priv->channel[direction]->netdev = dev;
dev_info(&dev->dev,
"setup OK : r/w = %s/%s, protocol : %d\n",
- priv->channel[READ]->id,
- priv->channel[WRITE]->id, priv->protocol);
+ priv->channel[CTCM_READ]->id,
+ priv->channel[CTCM_WRITE]->id, priv->protocol);
CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
"setup(%s) OK : r/w = %s/%s, protocol : %d", dev->name,
- priv->channel[READ]->id,
- priv->channel[WRITE]->id, priv->protocol);
+ priv->channel[CTCM_READ]->id,
+ priv->channel[CTCM_WRITE]->id, priv->protocol);
return 0;
out_unregister:
out_ccw1:
ccw_device_set_offline(cgdev->cdev[0]);
out_remove_channel2:
- readc = channel_get(type, read_id, READ);
+ readc = channel_get(type, read_id, CTCM_READ);
channel_remove(readc);
out_remove_channel1:
- writec = channel_get(type, write_id, WRITE);
+ writec = channel_get(type, write_id, CTCM_WRITE);
channel_remove(writec);
out_err_result:
return result;
if (!priv)
return -ENODEV;
- if (priv->channel[READ]) {
- dev = priv->channel[READ]->netdev;
+ if (priv->channel[CTCM_READ]) {
+ dev = priv->channel[CTCM_READ]->netdev;
CTCM_DBF_DEV(SETUP, dev, "");
/* Close the device */
ctcm_close(dev);
dev->flags &= ~IFF_RUNNING;
ctcm_remove_attributes(&cgdev->dev);
- channel_free(priv->channel[READ]);
+ channel_free(priv->channel[CTCM_READ]);
} else
dev = NULL;
- if (priv->channel[WRITE])
- channel_free(priv->channel[WRITE]);
+ if (priv->channel[CTCM_WRITE])
+ channel_free(priv->channel[CTCM_WRITE]);
if (dev) {
unregister_netdev(dev);
ccw_device_set_offline(cgdev->cdev[1]);
ccw_device_set_offline(cgdev->cdev[0]);
- if (priv->channel[READ])
- channel_remove(priv->channel[READ]);
- if (priv->channel[WRITE])
- channel_remove(priv->channel[WRITE]);
- priv->channel[READ] = priv->channel[WRITE] = NULL;
+ if (priv->channel[CTCM_READ])
+ channel_remove(priv->channel[CTCM_READ]);
+ if (priv->channel[CTCM_WRITE])
+ channel_remove(priv->channel[CTCM_WRITE]);
+ priv->channel[CTCM_READ] = priv->channel[CTCM_WRITE] = NULL;
return 0;
if (gdev->state == CCWGROUP_OFFLINE)
return 0;
- netif_device_detach(priv->channel[READ]->netdev);
- ctcm_close(priv->channel[READ]->netdev);
+ netif_device_detach(priv->channel[CTCM_READ]->netdev);
+ ctcm_close(priv->channel[CTCM_READ]->netdev);
if (!wait_event_timeout(priv->fsm->wait_q,
fsm_getstate(priv->fsm) == DEV_STATE_STOPPED, CTCM_TIME_5_SEC)) {
- netif_device_attach(priv->channel[READ]->netdev);
+ netif_device_attach(priv->channel[CTCM_READ]->netdev);
return -EBUSY;
}
ccw_device_set_offline(gdev->cdev[1]);
rc = ccw_device_set_online(gdev->cdev[0]);
if (rc)
goto err_out;
- ctcm_open(priv->channel[READ]->netdev);
+ ctcm_open(priv->channel[CTCM_READ]->netdev);
err_out:
- netif_device_attach(priv->channel[READ]->netdev);
+ netif_device_attach(priv->channel[CTCM_READ]->netdev);
return rc;
}
#define CTCM_INITIAL_BLOCKLEN 2
-#define READ 0
-#define WRITE 1
+#define CTCM_READ 0
+#define CTCM_WRITE 1
#define CTCM_ID_SIZE 20+3
return;
priv = dev->ml_priv;
grp = priv->mpcg;
- rch = priv->channel[READ];
- wch = priv->channel[WRITE];
+ rch = priv->channel[CTCM_READ];
+ wch = priv->channel[CTCM_WRITE];
CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_INFO,
"%s(%s): state=%s",
"%s: %s: flowc = %d",
CTCM_FUNTAIL, dev->name, flowc);
- rch = priv->channel[READ];
+ rch = priv->channel[CTCM_READ];
mpcg_state = fsm_getstate(grp->fsm);
switch (flowc) {
struct net_device *dev = rch->netdev;
struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
- struct channel *ch = priv->channel[WRITE];
+ struct channel *ch = priv->channel[CTCM_WRITE];
CTCM_PR_DEBUG("%s: ch=0x%p id=%s\n", __func__, ch, ch->id);
CTCM_D3_DUMP((char *)mpcginfo->sweep, TH_SWEEP_LENGTH);
int rc = 0;
struct th_sweep *header;
struct sk_buff *sweep_skb;
- struct channel *ch = priv->channel[WRITE];
+ struct channel *ch = priv->channel[CTCM_WRITE];
CTCM_PR_DEBUG("%s: ch=0x%p id=%s\n", __func__, rch, rch->id);
struct net_device *dev = rch->netdev;
struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
- struct channel *ch = priv->channel[WRITE];
+ struct channel *ch = priv->channel[CTCM_WRITE];
if (do_debug)
CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG,
if (grp->in_sweep == 0) {
grp->in_sweep = 1;
ctcm_test_and_set_busy(dev);
- grp->sweep_req_pend_num = grp->active_channels[READ];
- grp->sweep_rsp_pend_num = grp->active_channels[READ];
+ grp->sweep_req_pend_num = grp->active_channels[CTCM_READ];
+ grp->sweep_rsp_pend_num = grp->active_channels[CTCM_READ];
}
CTCM_D3_DUMP((char *)mpcginfo->sweep, TH_SWEEP_LENGTH);
fsm_newstate(grp->fsm, MPCG_STATE_READY);
/* Put up a read on the channel */
- ch = priv->channel[READ];
+ ch = priv->channel[CTCM_READ];
ch->pdu_seq = 0;
CTCM_PR_DBGDATA("ctcmpc: %s() ToDCM_pdu_seq= %08x\n" ,
__func__, ch->pdu_seq);
ctcmpc_chx_rxidle(ch->fsm, CTC_EVENT_START, ch);
/* Put the write channel in idle state */
- ch = priv->channel[WRITE];
+ ch = priv->channel[CTCM_WRITE];
if (ch->collect_len > 0) {
spin_lock(&ch->collect_lock);
ctcm_purge_skb_queue(&ch->collect_queue);
"%s: %i / Grp:%s total_channels=%i, active_channels: "
"read=%i, write=%i\n", __func__, action,
fsm_getstate_str(grp->fsm), grp->num_channel_paths,
- grp->active_channels[READ], grp->active_channels[WRITE]);
+ grp->active_channels[CTCM_READ],
+ grp->active_channels[CTCM_WRITE]);
if ((action == MPC_CHANNEL_ADD) && (ch->in_mpcgroup == 0)) {
grp->num_channel_paths++;
grp->xid_skb->data,
grp->xid_skb->len);
- ch->xid->xid2_dlc_type = ((CHANNEL_DIRECTION(ch->flags) == READ)
+ ch->xid->xid2_dlc_type =
+ ((CHANNEL_DIRECTION(ch->flags) == CTCM_READ)
? XID2_READ_SIDE : XID2_WRITE_SIDE);
- if (CHANNEL_DIRECTION(ch->flags) == WRITE)
+ if (CHANNEL_DIRECTION(ch->flags) == CTCM_WRITE)
ch->xid->xid2_buf_len = 0x00;
ch->xid_skb->data = ch->xid_skb_data;
fsm_newstate(ch->fsm, CH_XID0_PENDING);
- if ((grp->active_channels[READ] > 0) &&
- (grp->active_channels[WRITE] > 0) &&
+ if ((grp->active_channels[CTCM_READ] > 0) &&
+ (grp->active_channels[CTCM_WRITE] > 0) &&
(fsm_getstate(grp->fsm) < MPCG_STATE_XID2INITW)) {
fsm_newstate(grp->fsm, MPCG_STATE_XID2INITW);
CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_NOTICE,
if (grp->channels_terminating)
goto done;
- if (((grp->active_channels[READ] == 0) &&
- (grp->active_channels[WRITE] > 0))
- || ((grp->active_channels[WRITE] == 0) &&
- (grp->active_channels[READ] > 0)))
+ if (((grp->active_channels[CTCM_READ] == 0) &&
+ (grp->active_channels[CTCM_WRITE] > 0))
+ || ((grp->active_channels[CTCM_WRITE] == 0) &&
+ (grp->active_channels[CTCM_READ] > 0)))
fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
}
done:
"exit %s: %i / Grp:%s total_channels=%i, active_channels: "
"read=%i, write=%i\n", __func__, action,
fsm_getstate_str(grp->fsm), grp->num_channel_paths,
- grp->active_channels[READ], grp->active_channels[WRITE]);
+ grp->active_channels[CTCM_READ],
+ grp->active_channels[CTCM_WRITE]);
CTCM_PR_DEBUG("exit %s: ch=0x%p id=%s\n", __func__, ch, ch->id);
}
(grp->port_persist == 0))
fsm_deltimer(&priv->restart_timer);
- wch = priv->channel[WRITE];
- rch = priv->channel[READ];
+ wch = priv->channel[CTCM_WRITE];
+ rch = priv->channel[CTCM_READ];
switch (grp->saved_state) {
case MPCG_STATE_RESET:
priv = dev->ml_priv;
grp = priv->mpcg;
- wch = priv->channel[WRITE];
- rch = priv->channel[READ];
+ wch = priv->channel[CTCM_WRITE];
+ rch = priv->channel[CTCM_READ];
switch (fsm_getstate(grp->fsm)) {
case MPCG_STATE_XID2INITW:
CTCM_D3_DUMP((char *)xid, XID2_LENGTH);
/*the received direction should be the opposite of ours */
- if (((CHANNEL_DIRECTION(ch->flags) == READ) ? XID2_WRITE_SIDE :
+ if (((CHANNEL_DIRECTION(ch->flags) == CTCM_READ) ? XID2_WRITE_SIDE :
XID2_READ_SIDE) != xid->xid2_dlc_type) {
rc = 2;
/* XID REJECTED: r/w channel pairing mismatch */
if (grp == NULL)
return;
- for (direction = READ; direction <= WRITE; direction++) {
+ for (direction = CTCM_READ; direction <= CTCM_WRITE; direction++) {
struct channel *ch = priv->channel[direction];
struct xid2 *thisxid = ch->xid;
ch->xid_skb->data = ch->xid_skb_data;
return -ENOMEM;
}
- *((__u32 *)skb_push(skb, 4)) = priv->channel[READ]->pdu_seq;
- priv->channel[READ]->pdu_seq++;
+ *((__u32 *)skb_push(skb, 4)) =
+ priv->channel[CTCM_READ]->pdu_seq;
+ priv->channel[CTCM_READ]->pdu_seq++;
CTCM_PR_DBGDATA("ctcmpc: %s ToDCM_pdu_seq= %08x\n",
- __func__, priv->channel[READ]->pdu_seq);
+ __func__, priv->channel[CTCM_READ]->pdu_seq);
/* receipt of CC03 resets anticipated sequence number on
receiving side */
- priv->channel[READ]->pdu_seq = 0x00;
+ priv->channel[CTCM_READ]->pdu_seq = 0x00;
skb_reset_mac_header(skb);
skb->dev = dev;
skb->protocol = htons(ETH_P_SNAP);
int bs1;
struct ctcm_priv *priv = dev_get_drvdata(dev);
- if (!(priv && priv->channel[READ] &&
- (ndev = priv->channel[READ]->netdev))) {
+ ndev = priv->channel[CTCM_READ]->netdev;
+ if (!(priv && priv->channel[CTCM_READ] && ndev)) {
CTCM_DBF_TEXT(SETUP, CTC_DBF_ERROR, "bfnondev");
return -ENODEV;
}
(bs1 < (ndev->mtu + LL_HEADER_LENGTH + 2)))
goto einval;
- priv->channel[READ]->max_bufsize = bs1;
- priv->channel[WRITE]->max_bufsize = bs1;
+ priv->channel[CTCM_READ]->max_bufsize = bs1;
+ priv->channel[CTCM_WRITE]->max_bufsize = bs1;
if (!(ndev->flags & IFF_RUNNING))
ndev->mtu = bs1 - LL_HEADER_LENGTH - 2;
- priv->channel[READ]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED;
- priv->channel[WRITE]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED;
+ priv->channel[CTCM_READ]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED;
+ priv->channel[CTCM_WRITE]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED;
CTCM_DBF_DEV(SETUP, ndev, buf);
return count;
p += sprintf(p, " Device FSM state: %s\n",
fsm_getstate_str(priv->fsm));
p += sprintf(p, " RX channel FSM state: %s\n",
- fsm_getstate_str(priv->channel[READ]->fsm));
+ fsm_getstate_str(priv->channel[CTCM_READ]->fsm));
p += sprintf(p, " TX channel FSM state: %s\n",
- fsm_getstate_str(priv->channel[WRITE]->fsm));
+ fsm_getstate_str(priv->channel[CTCM_WRITE]->fsm));
p += sprintf(p, " Max. TX buffer used: %ld\n",
priv->channel[WRITE]->prof.maxmulti);
p += sprintf(p, " Max. chained SKBs: %ld\n",
priv->channel[WRITE]->prof.tx_time);
printk(KERN_INFO "Statistics for %s:\n%s",
- priv->channel[WRITE]->netdev->name, sbuf);
+ priv->channel[CTCM_WRITE]->netdev->name, sbuf);
kfree(sbuf);
return;
}
return -ENODEV;
/* Reset statistics */
memset(&priv->channel[WRITE]->prof, 0,
- sizeof(priv->channel[WRITE]->prof));
+ sizeof(priv->channel[CTCM_WRITE]->prof));
return count;
}
goto fail_put_driver;
}
+ /* convert sender to uppercase characters */
+ if (sender) {
+ int len = strlen(sender);
+ while (len--)
+ sender[len] = toupper(sender[len]);
+ }
+
/* register with the smsgiucv device driver */
rc = smsg_register_callback(SMSG_PREFIX, smsg_app_callback);
if (rc) {
return 0;
}
-static void attach_one_temp(struct bbc_i2c_bus *bp, struct of_device *op,
+static void attach_one_temp(struct bbc_i2c_bus *bp, struct platform_device *op,
int temp_idx)
{
struct bbc_cpu_temperature *tp;
tp->fan_todo[FAN_CPU] = FAN_SAME;
}
-static void attach_one_fan(struct bbc_i2c_bus *bp, struct of_device *op,
+static void attach_one_fan(struct bbc_i2c_bus *bp, struct platform_device *op,
int fan_idx)
{
struct bbc_fan_control *fp;
int bbc_envctrl_init(struct bbc_i2c_bus *bp)
{
- struct of_device *op;
+ struct platform_device *op;
int temp_index = 0;
int fan_index = 0;
int devidx = 0;
* The second controller also connects to the smartcard reader, if present.
*/
-static void set_device_claimage(struct bbc_i2c_bus *bp, struct of_device *op, int val)
+static void set_device_claimage(struct bbc_i2c_bus *bp, struct platform_device *op, int val)
{
int i;
#define claim_device(BP,ECHILD) set_device_claimage(BP,ECHILD,1)
#define release_device(BP,ECHILD) set_device_claimage(BP,ECHILD,0)
-struct of_device *bbc_i2c_getdev(struct bbc_i2c_bus *bp, int index)
+struct platform_device *bbc_i2c_getdev(struct bbc_i2c_bus *bp, int index)
{
- struct of_device *op = NULL;
+ struct platform_device *op = NULL;
int curidx = 0, i;
for (i = 0; i < NUM_CHILDREN; i++) {
return NULL;
}
-struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct of_device *op)
+struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct platform_device *op)
{
struct bbc_i2c_client *client;
const u32 *reg;
void bbc_i2c_detach(struct bbc_i2c_client *client)
{
struct bbc_i2c_bus *bp = client->bp;
- struct of_device *op = client->op;
+ struct platform_device *op = client->op;
release_device(bp, op);
kfree(client);
writeb(I2C_PCF_IDLE, bp->i2c_control_regs + 0x0);
}
-static struct bbc_i2c_bus * __init attach_one_i2c(struct of_device *op, int index)
+static struct bbc_i2c_bus * __init attach_one_i2c(struct platform_device *op, int index)
{
struct bbc_i2c_bus *bp;
struct device_node *dp;
for (dp = op->dev.of_node->child;
dp && entry < 8;
dp = dp->sibling, entry++) {
- struct of_device *child_op;
+ struct platform_device *child_op;
child_op = of_find_device_by_node(dp);
bp->devs[entry].device = child_op;
extern int bbc_envctrl_init(struct bbc_i2c_bus *bp);
extern void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp);
-static int __devinit bbc_i2c_probe(struct of_device *op,
+static int __devinit bbc_i2c_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct bbc_i2c_bus *bp;
return err;
}
-static int __devexit bbc_i2c_remove(struct of_device *op)
+static int __devexit bbc_i2c_remove(struct platform_device *op)
{
struct bbc_i2c_bus *bp = dev_get_drvdata(&op->dev);
struct bbc_i2c_client {
struct bbc_i2c_bus *bp;
- struct of_device *op;
+ struct platform_device *op;
int bus;
int address;
};
struct list_head temps;
struct list_head fans;
- struct of_device *op;
+ struct platform_device *op;
struct {
- struct of_device *device;
+ struct platform_device *device;
int client_claimed;
} devs[NUM_CHILDREN];
};
/* Probing and attachment. */
-extern struct of_device *bbc_i2c_getdev(struct bbc_i2c_bus *, int);
-extern struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct of_device *);
+extern struct platform_device *bbc_i2c_getdev(struct bbc_i2c_bus *, int);
+extern struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct platform_device *);
extern void bbc_i2c_detach(struct bbc_i2c_client *);
/* Register read/write. NOTE: Blocking! */
.fops = &d7s_fops
};
-static int __devinit d7s_probe(struct of_device *op,
+static int __devinit d7s_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *opts;
goto out;
}
-static int __devexit d7s_remove(struct of_device *op)
+static int __devexit d7s_remove(struct platform_device *op)
{
struct d7s *p = dev_get_drvdata(&op->dev);
u8 regs = readb(p->regs);
return 0;
}
-static int __devinit envctrl_probe(struct of_device *op,
+static int __devinit envctrl_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *dp;
return err;
}
-static int __devexit envctrl_remove(struct of_device *op)
+static int __devexit envctrl_remove(struct platform_device *op)
{
int index;
static struct miscdevice flash_dev = { FLASH_MINOR, "flash", &flash_fops };
-static int __devinit flash_probe(struct of_device *op,
+static int __devinit flash_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
return misc_register(&flash_dev);
}
-static int __devexit flash_remove(struct of_device *op)
+static int __devexit flash_remove(struct platform_device *op)
{
misc_deregister(&flash_dev);
}
-static int __devinit uctrl_probe(struct of_device *op,
+static int __devinit uctrl_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct uctrl_driver *p;
goto out;
}
-static int __devexit uctrl_remove(struct of_device *op)
+static int __devexit uctrl_remove(struct platform_device *op)
{
struct uctrl_driver *p = dev_get_drvdata(&op->dev);
hostdata->msgin = memory + MSGIN_OFFSET;
hostdata->msgout = memory + MSGOUT_OFFSET;
hostdata->status = memory + STATUS_OFFSET;
- /* all of these offsets are L1_CACHE_BYTES separated. It is fatal
- * if this isn't sufficient separation to avoid dma flushing issues */
- BUG_ON(!dma_is_consistent(hostdata->dev, pScript) && L1_CACHE_BYTES < dma_get_cache_alignment());
hostdata->slots = (struct NCR_700_command_slot *)(memory + SLOTS_OFFSET);
hostdata->dev = dev;
http://open-iscsi.org
+config ISCSI_BOOT_SYSFS
+ tristate "iSCSI Boot Sysfs Interface"
+ default n
+ help
+ This option enables support for exposing iSCSI boot information
+ via sysfs to userspace. If you wish to export this information,
+ say Y. Otherwise, say N.
+
source "drivers/scsi/cxgb3i/Kconfig"
source "drivers/scsi/bnx2i/Kconfig"
source "drivers/scsi/be2iscsi/Kconfig"
config SCSI_PMCRAID
tristate "PMC SIERRA Linux MaxRAID adapter support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && NET
---help---
This driver supports the PMC SIERRA MaxRAID adapters.
obj-$(CONFIG_FCOE_FNIC) += fnic/
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o
obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
+obj-$(CONFIG_ISCSI_BOOT_SYSFS) += iscsi_boot_sysfs.o
obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o
obj-$(CONFIG_SCSI_ZORRO7XX) += 53c700.o zorro7xx.o
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
#endif
/* KLL May need eop and parity in 53c400 */
if (hostdata->flags & FLAG_NCR53C400)
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR | MR_ENABLE_EOP_INTR | MR_DMA_MODE | MR_MONITOR_BSY);
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE |
+ MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR |
+ MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
else
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE);
#endif /* def REAL_DMA */
pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
post, paddr);
if (likely((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X')))) {
- ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10);
- ret <<= 4;
- ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10);
+ ret = (hex_to_bin(buffer[2]) << 4) +
+ hex_to_bin(buffer[3]);
}
pci_free_consistent(dev->pdev, 512, buffer, baddr);
return ret;
#define SCSI_BUF_PA(address) isa_virt_to_bus(address)
#define SCSI_SG_PA(sgent) (isa_page_to_bus(sg_page((sgent))) + (sgent)->offset)
-static void BAD_SG_DMA(Scsi_Cmnd * SCpnt,
- struct scatterlist *sgp,
- int nseg,
- int badseg)
-{
- printk(KERN_CRIT "sgpnt[%d:%d] page %p/0x%llx length %u\n",
- badseg, nseg, sg_virt(sgp),
- (unsigned long long)SCSI_SG_PA(sgp),
- sgp->length);
-
- /*
- * Not safe to continue.
- */
- panic("Buffer at physical address > 16Mb used for aha1542");
-}
-
#include<linux/stat.h>
#ifdef DEBUG
}
scsi_for_each_sg(SCpnt, sg, sg_count, i) {
any2scsi(cptr[i].dataptr, SCSI_SG_PA(sg));
- if (SCSI_SG_PA(sg) + sg->length - 1 > ISA_DMA_THRESHOLD)
- BAD_SG_DMA(SCpnt, scsi_sglist(SCpnt), sg_count, i);
any2scsi(cptr[i].datalen, sg->length);
};
any2scsi(ccb[mbo].datalen, sg_count * sizeof(struct chain));
release_region(bases[indx], 4);
continue;
}
- /* For now we do this - until kmalloc is more intelligent
- we are resigned to stupid hacks like this */
- if (SCSI_BUF_PA(shpnt) >= ISA_DMA_THRESHOLD) {
- printk(KERN_ERR "Invalid address for shpnt with 1542.\n");
- goto unregister;
- }
if (!aha1542_test_port(bases[indx], shpnt))
goto unregister;
-
base_io = bases[indx];
/* Set the Bus on/off-times as not to ruin floppy performance */
{
int i;
struct asd_sas_phy **sas_phys =
- kmalloc(ASD_MAX_PHYS * sizeof(struct asd_sas_phy), GFP_KERNEL);
+ kcalloc(ASD_MAX_PHYS, sizeof(*sas_phys), GFP_KERNEL);
struct asd_sas_port **sas_ports =
- kmalloc(ASD_MAX_PHYS * sizeof(struct asd_sas_port), GFP_KERNEL);
+ kcalloc(ASD_MAX_PHYS, sizeof(*sas_ports), GFP_KERNEL);
if (!sas_phys || !sas_ports) {
kfree(sas_phys);
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/timer.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/aer.h>
#include <asm/dma.h>
tristate "ServerEngines' 10Gbps iSCSI - BladeEngine 2"
depends on PCI && SCSI && NET
select SCSI_ISCSI_ATTRS
+ select ISCSI_BOOT_SYSFS
help
This driver implements the iSCSI functionality for ServerEngines'
#define OPCODE_COMMON_ISCSI_CFG_POST_SGL_PAGES 2
#define OPCODE_COMMON_ISCSI_CFG_REMOVE_SGL_PAGES 3
#define OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG 7
+#define OPCODE_COMMON_ISCSI_NTWK_SET_VLAN 14
+#define OPCODE_COMMON_ISCSI_NTWK_CONFIGURE_STATELESS_IP_ADDR 17
+#define OPCODE_COMMON_ISCSI_NTWK_MODIFY_IP_ADDR 21
+#define OPCODE_COMMON_ISCSI_NTWK_GET_DEFAULT_GATEWAY 22
+#define OPCODE_COMMON_ISCSI_NTWK_MODIFY_DEFAULT_GATEWAY 23
+#define OPCODE_COMMON_ISCSI_NTWK_GET_ALL_IF_ID 24
+#define OPCODE_COMMON_ISCSI_NTWK_GET_IF_INFO 25
#define OPCODE_COMMON_ISCSI_SET_FRAGNUM_BITS_FOR_SGL_CRA 61
#define OPCODE_COMMON_ISCSI_DEFQ_CREATE 64
#define OPCODE_COMMON_ISCSI_DEFQ_DESTROY 65
u16 rsvd0; /* sword */
} __packed;
+struct mgmt_chap_format {
+ u32 flags;
+ u8 intr_chap_name[256];
+ u8 intr_secret[16];
+ u8 target_chap_name[256];
+ u8 target_secret[16];
+ u16 intr_chap_name_length;
+ u16 intr_secret_length;
+ u16 target_chap_name_length;
+ u16 target_secret_length;
+} __packed;
+
+struct mgmt_auth_method_format {
+ u8 auth_method_type;
+ u8 padding[3];
+ struct mgmt_chap_format chap;
+} __packed;
+
+struct mgmt_conn_login_options {
+ u8 flags;
+ u8 header_digest;
+ u8 data_digest;
+ u8 rsvd0;
+ u32 max_recv_datasegment_len_ini;
+ u32 max_recv_datasegment_len_tgt;
+ u32 tcp_mss;
+ u32 tcp_window_size;
+ struct mgmt_auth_method_format auth_data;
+} __packed;
+
+struct ip_address_format {
+ u16 size_of_structure;
+ u8 reserved;
+ u8 ip_type;
+ u8 ip_address[16];
+ u32 rsvd0;
+} __packed;
+
+struct mgmt_conn_info {
+ u32 connection_handle;
+ u32 connection_status;
+ u16 src_port;
+ u16 dest_port;
+ u16 dest_port_redirected;
+ u16 cid;
+ u32 estimated_throughput;
+ struct ip_address_format src_ipaddr;
+ struct ip_address_format dest_ipaddr;
+ struct ip_address_format dest_ipaddr_redirected;
+ struct mgmt_conn_login_options negotiated_login_options;
+} __packed;
+
+struct mgmt_session_login_options {
+ u8 flags;
+ u8 error_recovery_level;
+ u16 rsvd0;
+ u32 first_burst_length;
+ u32 max_burst_length;
+ u16 max_connections;
+ u16 max_outstanding_r2t;
+ u16 default_time2wait;
+ u16 default_time2retain;
+} __packed;
+
+struct mgmt_session_info {
+ u32 session_handle;
+ u32 status;
+ u8 isid[6];
+ u16 tsih;
+ u32 session_flags;
+ u16 conn_count;
+ u16 pad;
+ u8 target_name[224];
+ u8 initiator_iscsiname[224];
+ struct mgmt_session_login_options negotiated_login_options;
+ struct mgmt_conn_info conn_list[1];
+} __packed;
+
+struct be_cmd_req_get_session {
+ struct be_cmd_req_hdr hdr;
+ u32 session_handle;
+} __packed;
+
+struct be_cmd_resp_get_session {
+ struct be_cmd_resp_hdr hdr;
+ struct mgmt_session_info session_info;
+} __packed;
+
struct mac_addr {
u16 size_of_struct;
u8 addr[ETH_ALEN];
} __packed;
+struct be_cmd_req_get_boot_target {
+ struct be_cmd_req_hdr hdr;
+} __packed;
+
+struct be_cmd_resp_get_boot_target {
+ struct be_cmd_resp_hdr hdr;
+ u32 boot_session_count;
+ int boot_session_handle;
+};
+
struct be_cmd_req_mac_query {
struct be_cmd_req_hdr hdr;
u8 type;
int mgmt_check_supported_fw(struct be_ctrl_info *ctrl,
struct beiscsi_hba *phba);
unsigned int be_cmd_get_mac_addr(struct beiscsi_hba *phba);
+unsigned int beiscsi_get_boot_target(struct beiscsi_hba *phba);
+unsigned int beiscsi_get_session_info(struct beiscsi_hba *phba,
+ u32 boot_session_handle,
+ struct be_dma_mem *nonemb_cmd);
+
void free_mcc_tag(struct be_ctrl_info *ctrl, unsigned int tag);
/*ISCSI Functuions */
int be_cmd_fw_initialize(struct be_ctrl_info *ctrl);
struct eq_delay delay[8];
} __packed;
-struct ip_address_format {
- u16 size_of_structure;
- u8 reserved;
- u8 ip_type;
- u8 ip_address[16];
- u32 rsvd0;
-} __packed;
-
struct tcp_connect_and_offload_in {
struct be_cmd_req_hdr hdr;
struct ip_address_format ip_address;
u32 function_caps;
} __packed;
-#define CMD_ISCSI_COMMAND_INVALIDATE 1
-#define ISCSI_OPCODE_SCSI_DATA_OUT 5
+struct be_all_if_id {
+ struct be_cmd_req_hdr hdr;
+ u32 if_count;
+ u32 if_hndl_list[1];
+} __packed;
+
+#define ISCSI_OPCODE_SCSI_DATA_OUT 5
+#define OPCODE_COMMON_MODIFY_EQ_DELAY 41
+#define OPCODE_COMMON_ISCSI_CLEANUP 59
+#define OPCODE_COMMON_TCP_UPLOAD 56
#define OPCODE_COMMON_ISCSI_TCP_CONNECT_AND_OFFLOAD 70
-#define OPCODE_ISCSI_INI_DRIVER_OFFLOAD_SESSION 41
-#define OPCODE_COMMON_MODIFY_EQ_DELAY 41
-#define OPCODE_COMMON_ISCSI_CLEANUP 59
-#define OPCODE_COMMON_TCP_UPLOAD 56
#define OPCODE_COMMON_ISCSI_ERROR_RECOVERY_INVALIDATE_COMMANDS 1
-/* --- CMD_ISCSI_INVALIDATE_CONNECTION_TYPE --- */
-#define CMD_ISCSI_CONNECTION_INVALIDATE 0x8001
-#define CMD_ISCSI_CONNECTION_ISSUE_TCP_RST 0x8002
+#define OPCODE_ISCSI_INI_CFG_GET_HBA_NAME 6
+#define OPCODE_ISCSI_INI_CFG_SET_HBA_NAME 7
+#define OPCODE_ISCSI_INI_SESSION_GET_A_SESSION 14
+#define OPCODE_ISCSI_INI_DRIVER_OFFLOAD_SESSION 41
#define OPCODE_ISCSI_INI_DRIVER_INVALIDATE_CONNECTION 42
+#define OPCODE_ISCSI_INI_BOOT_GET_BOOT_TARGET 52
+
+/* --- CMD_ISCSI_INVALIDATE_CONNECTION_TYPE --- */
+#define CMD_ISCSI_COMMAND_INVALIDATE 1
+#define CMD_ISCSI_CONNECTION_INVALIDATE 0x8001
+#define CMD_ISCSI_CONNECTION_ISSUE_TCP_RST 0x8002
#define INI_WR_CMD 1 /* Initiator write command */
#define INI_TMF_CMD 2 /* Initiator TMF command */
enum iscsi_host_param param, char *buf)
{
struct beiscsi_hba *phba = (struct beiscsi_hba *)iscsi_host_priv(shost);
- struct be_cmd_resp_get_mac_addr *resp;
- struct be_mcc_wrb *wrb;
- unsigned int tag, wrb_num;
int len = 0;
- unsigned short status, extd_status;
- struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+ int status;
SE_DEBUG(DBG_LVL_8, "In beiscsi_get_host_param, param= %d\n", param);
switch (param) {
case ISCSI_HOST_PARAM_HWADDRESS:
- tag = be_cmd_get_mac_addr(phba);
- if (!tag) {
- SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed\n");
- return -EAGAIN;
- } else
- wait_event_interruptible(phba->ctrl.mcc_wait[tag],
- phba->ctrl.mcc_numtag[tag]);
-
- wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
- extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
- status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
- if (status || extd_status) {
- SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed"
- " status = %d extd_status = %d\n",
- status, extd_status);
- free_mcc_tag(&phba->ctrl, tag);
- return -EAGAIN;
- } else {
- wrb = queue_get_wrb(mccq, wrb_num);
- free_mcc_tag(&phba->ctrl, tag);
- resp = embedded_payload(wrb);
- memcpy(phba->mac_address, resp->mac_address, ETH_ALEN);
- len = sysfs_format_mac(buf, phba->mac_address,
- ETH_ALEN);
+ status = beiscsi_get_macaddr(buf, phba);
+ if (status < 0) {
+ SE_DEBUG(DBG_LVL_1, "beiscsi_get_macaddr Failed\n");
+ return status;
}
break;
default:
return len;
}
+int beiscsi_get_macaddr(char *buf, struct beiscsi_hba *phba)
+{
+ struct be_cmd_resp_get_mac_addr *resp;
+ struct be_mcc_wrb *wrb;
+ unsigned int tag, wrb_num;
+ unsigned short status, extd_status;
+ struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+ int rc;
+
+ if (phba->read_mac_address)
+ return sysfs_format_mac(buf, phba->mac_address,
+ ETH_ALEN);
+
+ tag = be_cmd_get_mac_addr(phba);
+ if (!tag) {
+ SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed\n");
+ return -EBUSY;
+ } else
+ wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+ phba->ctrl.mcc_numtag[tag]);
+
+ wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
+ extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
+ status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
+ if (status || extd_status) {
+ SE_DEBUG(DBG_LVL_1, "Failed to get be_cmd_get_mac_addr"
+ " status = %d extd_status = %d\n",
+ status, extd_status);
+ free_mcc_tag(&phba->ctrl, tag);
+ return -EAGAIN;
+ }
+ wrb = queue_get_wrb(mccq, wrb_num);
+ free_mcc_tag(&phba->ctrl, tag);
+ resp = embedded_payload(wrb);
+ memcpy(phba->mac_address, resp->mac_address, ETH_ALEN);
+ rc = sysfs_format_mac(buf, phba->mac_address,
+ ETH_ALEN);
+ phba->read_mac_address = 1;
+ return rc;
+}
+
+
/**
* beiscsi_conn_get_stats - get the iscsi stats
* @cls_conn: pointer to iscsi cls conn
int beiscsi_get_host_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf);
+int beiscsi_get_macaddr(char *buf, struct beiscsi_hba *phba);
+
int beiscsi_set_param(struct iscsi_cls_conn *cls_conn,
enum iscsi_param param, char *buf, int buflen);
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/semaphore.h>
+#include <linux/iscsi_boot_sysfs.h>
#include <scsi/libiscsi.h>
#include <scsi/scsi_transport_iscsi.h>
return rc;
}
+static ssize_t beiscsi_show_boot_tgt_info(void *data, int type, char *buf)
+{
+ struct beiscsi_hba *phba = data;
+ char *str = buf;
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_TGT_NAME:
+ rc = sprintf(buf, "%.*s\n",
+ (int)strlen(phba->boot_sess.target_name),
+ (char *)&phba->boot_sess.target_name);
+ break;
+ case ISCSI_BOOT_TGT_IP_ADDR:
+ if (phba->boot_sess.conn_list[0].dest_ipaddr.ip_type == 0x1)
+ rc = sprintf(buf, "%pI4\n",
+ (char *)&phba->boot_sess.conn_list[0].
+ dest_ipaddr.ip_address);
+ else
+ rc = sprintf(str, "%pI6\n",
+ (char *)&phba->boot_sess.conn_list[0].
+ dest_ipaddr.ip_address);
+ break;
+ case ISCSI_BOOT_TGT_PORT:
+ rc = sprintf(str, "%d\n", phba->boot_sess.conn_list[0].
+ dest_port);
+ break;
+
+ case ISCSI_BOOT_TGT_CHAP_NAME:
+ rc = sprintf(str, "%.*s\n",
+ phba->boot_sess.conn_list[0].
+ negotiated_login_options.auth_data.chap.
+ target_chap_name_length,
+ (char *)&phba->boot_sess.conn_list[0].
+ negotiated_login_options.auth_data.chap.
+ target_chap_name);
+ break;
+ case ISCSI_BOOT_TGT_CHAP_SECRET:
+ rc = sprintf(str, "%.*s\n",
+ phba->boot_sess.conn_list[0].
+ negotiated_login_options.auth_data.chap.
+ target_secret_length,
+ (char *)&phba->boot_sess.conn_list[0].
+ negotiated_login_options.auth_data.chap.
+ target_secret);
+
+ break;
+ case ISCSI_BOOT_TGT_REV_CHAP_NAME:
+ rc = sprintf(str, "%.*s\n",
+ phba->boot_sess.conn_list[0].
+ negotiated_login_options.auth_data.chap.
+ intr_chap_name_length,
+ (char *)&phba->boot_sess.conn_list[0].
+ negotiated_login_options.auth_data.chap.
+ intr_chap_name);
+
+ break;
+ case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
+ rc = sprintf(str, "%.*s\n",
+ phba->boot_sess.conn_list[0].
+ negotiated_login_options.auth_data.chap.
+ intr_secret_length,
+ (char *)&phba->boot_sess.conn_list[0].
+ negotiated_login_options.auth_data.chap.
+ intr_secret);
+ break;
+ case ISCSI_BOOT_TGT_FLAGS:
+ rc = sprintf(str, "2\n");
+ break;
+ case ISCSI_BOOT_TGT_NIC_ASSOC:
+ rc = sprintf(str, "0\n");
+ break;
+ default:
+ rc = -ENOSYS;
+ break;
+ }
+ return rc;
+}
+
+static ssize_t beiscsi_show_boot_ini_info(void *data, int type, char *buf)
+{
+ struct beiscsi_hba *phba = data;
+ char *str = buf;
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_INI_INITIATOR_NAME:
+ rc = sprintf(str, "%s\n", phba->boot_sess.initiator_iscsiname);
+ break;
+ default:
+ rc = -ENOSYS;
+ break;
+ }
+ return rc;
+}
+
+static ssize_t beiscsi_show_boot_eth_info(void *data, int type, char *buf)
+{
+ struct beiscsi_hba *phba = data;
+ char *str = buf;
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_ETH_FLAGS:
+ rc = sprintf(str, "2\n");
+ break;
+ case ISCSI_BOOT_ETH_INDEX:
+ rc = sprintf(str, "0\n");
+ break;
+ case ISCSI_BOOT_ETH_MAC:
+ rc = beiscsi_get_macaddr(buf, phba);
+ if (rc < 0) {
+ SE_DEBUG(DBG_LVL_1, "beiscsi_get_macaddr Failed\n");
+ return rc;
+ }
+ break;
+ default:
+ rc = -ENOSYS;
+ break;
+ }
+ return rc;
+}
+
+
+static mode_t beiscsi_tgt_get_attr_visibility(void *data, int type)
+{
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_TGT_NAME:
+ case ISCSI_BOOT_TGT_IP_ADDR:
+ case ISCSI_BOOT_TGT_PORT:
+ case ISCSI_BOOT_TGT_CHAP_NAME:
+ case ISCSI_BOOT_TGT_CHAP_SECRET:
+ case ISCSI_BOOT_TGT_REV_CHAP_NAME:
+ case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
+ case ISCSI_BOOT_TGT_NIC_ASSOC:
+ case ISCSI_BOOT_TGT_FLAGS:
+ rc = S_IRUGO;
+ break;
+ default:
+ rc = 0;
+ break;
+ }
+ return rc;
+}
+
+static mode_t beiscsi_ini_get_attr_visibility(void *data, int type)
+{
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_INI_INITIATOR_NAME:
+ rc = S_IRUGO;
+ break;
+ default:
+ rc = 0;
+ break;
+ }
+ return rc;
+}
+
+
+static mode_t beiscsi_eth_get_attr_visibility(void *data, int type)
+{
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_ETH_FLAGS:
+ case ISCSI_BOOT_ETH_MAC:
+ case ISCSI_BOOT_ETH_INDEX:
+ rc = S_IRUGO;
+ break;
+ default:
+ rc = 0;
+ break;
+ }
+ return rc;
+}
+
+static int beiscsi_setup_boot_info(struct beiscsi_hba *phba)
+{
+ struct iscsi_boot_kobj *boot_kobj;
+
+ phba->boot_kset = iscsi_boot_create_host_kset(phba->shost->host_no);
+ if (!phba->boot_kset)
+ return -ENOMEM;
+
+ /* get boot info using mgmt cmd */
+ boot_kobj = iscsi_boot_create_target(phba->boot_kset, 0, phba,
+ beiscsi_show_boot_tgt_info,
+ beiscsi_tgt_get_attr_visibility);
+ if (!boot_kobj)
+ goto free_kset;
+
+ boot_kobj = iscsi_boot_create_initiator(phba->boot_kset, 0, phba,
+ beiscsi_show_boot_ini_info,
+ beiscsi_ini_get_attr_visibility);
+ if (!boot_kobj)
+ goto free_kset;
+
+ boot_kobj = iscsi_boot_create_ethernet(phba->boot_kset, 0, phba,
+ beiscsi_show_boot_eth_info,
+ beiscsi_eth_get_attr_visibility);
+ if (!boot_kobj)
+ goto free_kset;
+ return 0;
+
+free_kset:
+ iscsi_boot_destroy_kset(phba->boot_kset);
+ return -ENOMEM;
+}
+
/*------------------- PCI Driver operations and data ----------------- */
static DEFINE_PCI_DEVICE_TABLE(beiscsi_pci_id_table) = {
{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
if (iscsi_host_add(shost, &phba->pcidev->dev))
goto free_devices;
+
+ if (beiscsi_setup_boot_info(phba))
+ /*
+ * log error but continue, because we may not be using
+ * iscsi boot.
+ */
+ shost_printk(KERN_ERR, phba->shost, "Could not set up "
+ "iSCSI boot info.");
+
return phba;
free_devices:
"In hwi_disable_intr, Already Disabled\n");
}
+static int beiscsi_get_boot_info(struct beiscsi_hba *phba)
+{
+ struct be_cmd_resp_get_boot_target *boot_resp;
+ struct be_cmd_resp_get_session *session_resp;
+ struct be_mcc_wrb *wrb;
+ struct be_dma_mem nonemb_cmd;
+ unsigned int tag, wrb_num;
+ unsigned short status, extd_status;
+ struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+
+ tag = beiscsi_get_boot_target(phba);
+ if (!tag) {
+ SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed\n");
+ return -EAGAIN;
+ } else
+ wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+ phba->ctrl.mcc_numtag[tag]);
+
+ wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
+ extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
+ status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
+ if (status || extd_status) {
+ SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed"
+ " status = %d extd_status = %d\n",
+ status, extd_status);
+ free_mcc_tag(&phba->ctrl, tag);
+ return -EBUSY;
+ }
+ wrb = queue_get_wrb(mccq, wrb_num);
+ free_mcc_tag(&phba->ctrl, tag);
+ boot_resp = embedded_payload(wrb);
+
+ if (boot_resp->boot_session_handle < 0) {
+ printk(KERN_ERR "No Boot Session for this pci_func,"
+ "session Hndl = %d\n", boot_resp->boot_session_handle);
+ return -ENXIO;
+ }
+
+ nonemb_cmd.va = pci_alloc_consistent(phba->ctrl.pdev,
+ sizeof(*session_resp),
+ &nonemb_cmd.dma);
+ if (nonemb_cmd.va == NULL) {
+ SE_DEBUG(DBG_LVL_1,
+ "Failed to allocate memory for"
+ "beiscsi_get_session_info\n");
+ return -ENOMEM;
+ }
+
+ memset(nonemb_cmd.va, 0, sizeof(*session_resp));
+ tag = beiscsi_get_session_info(phba,
+ boot_resp->boot_session_handle, &nonemb_cmd);
+ if (!tag) {
+ SE_DEBUG(DBG_LVL_1, "beiscsi_get_session_info"
+ " Failed\n");
+ goto boot_freemem;
+ } else
+ wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+ phba->ctrl.mcc_numtag[tag]);
+
+ wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
+ extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
+ status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
+ if (status || extd_status) {
+ SE_DEBUG(DBG_LVL_1, "beiscsi_get_session_info Failed"
+ " status = %d extd_status = %d\n",
+ status, extd_status);
+ free_mcc_tag(&phba->ctrl, tag);
+ goto boot_freemem;
+ }
+ wrb = queue_get_wrb(mccq, wrb_num);
+ free_mcc_tag(&phba->ctrl, tag);
+ session_resp = nonemb_cmd.va ;
+ memcpy(&phba->boot_sess, &session_resp->session_info,
+ sizeof(struct mgmt_session_info));
+ pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size,
+ nonemb_cmd.va, nonemb_cmd.dma);
+ return 0;
+boot_freemem:
+ pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size,
+ nonemb_cmd.va, nonemb_cmd.dma);
+ return -ENOMEM;
+}
+
static int beiscsi_init_port(struct beiscsi_hba *phba)
{
int ret;
iscsi_host_remove(phba->shost);
pci_dev_put(phba->pcidev);
iscsi_host_free(phba->shost);
+ iscsi_boot_destroy_kset(phba->boot_kset);
}
static void beiscsi_msix_enable(struct beiscsi_hba *phba)
goto free_blkenbld;
}
hwi_enable_intr(phba);
+ ret = beiscsi_get_boot_info(phba);
+ if (ret < 0) {
+ shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+ "No Boot Devices !!!!!\n");
+ }
SE_DEBUG(DBG_LVL_8, "\n\n\n SUCCESS - DRIVER LOADED\n\n\n");
return 0;
#include "be.h"
#define DRV_NAME "be2iscsi"
-#define BUILD_STR "2.0.527.0"
+#define BUILD_STR "2.0.549.0"
#define BE_NAME "ServerEngines BladeEngine2" \
"Linux iSCSI Driver version" BUILD_STR
#define DRV_DESC BE_NAME " " "Driver"
#define BEISCSI_SGLIST_ELEMENTS 30
#define BEISCSI_CMD_PER_LUN 128 /* scsi_host->cmd_per_lun */
-#define BEISCSI_MAX_SECTORS 256 /* scsi_host->max_sectors */
+#define BEISCSI_MAX_SECTORS 2048 /* scsi_host->max_sectors */
#define BEISCSI_MAX_CMD_LEN 16 /* scsi_host->max_cmd_len */
#define BEISCSI_NUM_MAX_LUN 256 /* scsi_host->max_lun */
struct list_head hba_queue;
unsigned short *cid_array;
struct iscsi_endpoint **ep_array;
+ struct iscsi_boot_kset *boot_kset;
struct Scsi_Host *shost;
struct {
/**
struct work_struct work_cqs; /* The work being queued */
struct be_ctrl_info ctrl;
unsigned int generation;
+ unsigned int read_mac_address;
+ struct mgmt_session_info boot_sess;
struct invalidate_command_table inv_tbl[128];
};
#include "be_mgmt.h"
#include "be_iscsi.h"
+#include <scsi/scsi_transport_iscsi.h>
+
+unsigned int beiscsi_get_boot_target(struct beiscsi_hba *phba)
+{
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_get_mac_addr *req;
+ unsigned int tag = 0;
+
+ SE_DEBUG(DBG_LVL_8, "In bescsi_get_boot_target\n");
+ spin_lock(&ctrl->mbox_lock);
+ tag = alloc_mcc_tag(phba);
+ if (!tag) {
+ spin_unlock(&ctrl->mbox_lock);
+ return tag;
+ }
+
+ wrb = wrb_from_mccq(phba);
+ req = embedded_payload(wrb);
+ wrb->tag0 |= tag;
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI_INI,
+ OPCODE_ISCSI_INI_BOOT_GET_BOOT_TARGET,
+ sizeof(*req));
+
+ be_mcc_notify(phba);
+ spin_unlock(&ctrl->mbox_lock);
+ return tag;
+}
+
+unsigned int beiscsi_get_session_info(struct beiscsi_hba *phba,
+ u32 boot_session_handle,
+ struct be_dma_mem *nonemb_cmd)
+{
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct be_mcc_wrb *wrb;
+ unsigned int tag = 0;
+ struct be_cmd_req_get_session *req;
+ struct be_cmd_resp_get_session *resp;
+ struct be_sge *sge;
+
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_get_session_info\n");
+ spin_lock(&ctrl->mbox_lock);
+ tag = alloc_mcc_tag(phba);
+ if (!tag) {
+ spin_unlock(&ctrl->mbox_lock);
+ return tag;
+ }
+
+ nonemb_cmd->size = sizeof(*resp);
+ req = nonemb_cmd->va;
+ memset(req, 0, sizeof(*req));
+ wrb = wrb_from_mccq(phba);
+ sge = nonembedded_sgl(wrb);
+ wrb->tag0 |= tag;
+
+
+ wrb->tag0 |= tag;
+ be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI_INI,
+ OPCODE_ISCSI_INI_SESSION_GET_A_SESSION,
+ sizeof(*resp));
+ req->session_handle = boot_session_handle;
+ sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
+ sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
+ sge->len = cpu_to_le32(nonemb_cmd->size);
+
+ be_mcc_notify(phba);
+ spin_unlock(&ctrl->mbox_lock);
+ return tag;
+}
int mgmt_get_fw_config(struct be_ctrl_info *ctrl,
struct beiscsi_hba *phba)
break;
case BFI_FCPORT_I2H_DISABLE_RSP:
- if (fcport->msgtag == i2hmsg.penable_rsp->msgtag)
+ if (fcport->msgtag == i2hmsg.pdisable_rsp->msgtag)
bfa_sm_send_event(fcport, BFA_FCPORT_SM_FWRSP);
break;
memset(&driver_info, 0, sizeof(driver_info));
strncpy(driver_info.version, BFAD_DRIVER_VERSION,
sizeof(driver_info.version) - 1);
+ __kernel_param_lock();
if (host_name)
strncpy(driver_info.host_machine_name, host_name,
sizeof(driver_info.host_machine_name) - 1);
if (os_patch)
strncpy(driver_info.host_os_patch, os_patch,
sizeof(driver_info.host_os_patch) - 1);
+ __kernel_param_unlock();
strncpy(driver_info.os_device_name, bfad->pci_name,
sizeof(driver_info.os_device_name - 1));
struct bfa_tskim_s *tskim;
struct bfad_itnim_s *itnim;
struct bfa_itnim_s *bfa_itnim;
- DECLARE_WAIT_QUEUE_HEAD(wq);
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wq);
int rc = SUCCESS;
unsigned long flags;
enum bfi_tskim_status task_status;
struct bfad_itnim_s *itnim;
unsigned long flags;
u32 i, rc, err_cnt = 0;
- DECLARE_WAIT_QUEUE_HEAD(wq);
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wq);
enum bfi_tskim_status task_status;
spin_lock_irqsave(&bfad->bfad_lock, flags);
#ifndef __FCPPROTO_H__
#define __FCPPROTO_H__
+#include <linux/bitops.h>
#include <protocol/scsi.h>
#pragma pack(1)
/*
* Task management flags field - only one bit shall be set
*/
-#ifndef BIT
-#define BIT(_x) (1 << (_x))
-#endif
enum fcp_tm_cmnd{
FCP_TM_ABORT_TASK_SET = BIT(1),
FCP_TM_CLEAR_TASK_SET = BIT(2),
config SCSI_BNX2_ISCSI
tristate "Broadcom NetXtreme II iSCSI support"
+ depends on NET
+ depends on PCI
select SCSI_ISCSI_ATTRS
select NETDEVICES
select NETDEV_1000
select CNIC
- depends on PCI
---help---
This driver supports iSCSI offload for the Broadcom NetXtreme II
devices.
};
// module_param_string_array(vendor_labels, NULL, 0444);
-#define dprintk(fmt, arg...) if (debug) \
- printk(KERN_DEBUG "%s: " fmt, ch->name , ## arg)
-#define vprintk(fmt, arg...) if (verbose) \
- printk(KERN_INFO "%s: " fmt, ch->name , ## arg)
+#define DPRINTK(fmt, arg...) \
+do { \
+ if (debug) \
+ printk(KERN_DEBUG "%s: " fmt, ch->name, ##arg); \
+} while (0)
+#define VPRINTK(level, fmt, arg...) \
+do { \
+ if (verbose) \
+ printk(level "%s: " fmt, ch->name, ##arg); \
+} while (0)
/* ------------------------------------------------------------------- */
retry:
errno = 0;
if (debug) {
- dprintk("command: ");
+ DPRINTK("command: ");
__scsi_print_command(cmd);
}
buflength, &sshdr, timeout * HZ,
MAX_RETRIES, NULL);
- dprintk("result: 0x%x\n",result);
+ DPRINTK("result: 0x%x\n",result);
if (driver_byte(result) & DRIVER_SENSE) {
if (debug)
scsi_print_sense_hdr(ch->name, &sshdr);
cmd[9] = 255;
if (0 == (result = ch_do_scsi(ch, cmd, buffer, 256, DMA_FROM_DEVICE))) {
if (((buffer[16] << 8) | buffer[17]) != elem) {
- dprintk("asked for element 0x%02x, got 0x%02x\n",
+ DPRINTK("asked for element 0x%02x, got 0x%02x\n",
elem,(buffer[16] << 8) | buffer[17]);
kfree(buffer);
return -EIO;
} else {
if (ch->voltags) {
ch->voltags = 0;
- vprintk("device has no volume tag support\n");
+ VPRINTK(KERN_INFO, "device has no volume tag support\n");
goto retry;
}
- dprintk("READ ELEMENT STATUS for element 0x%x failed\n",elem);
+ DPRINTK("READ ELEMENT STATUS for element 0x%x failed\n",elem);
}
kfree(buffer);
return result;
int err;
u_char cmd[6];
- vprintk("INITIALIZE ELEMENT STATUS, may take some time ...\n");
+ VPRINTK(KERN_INFO, "INITIALIZE ELEMENT STATUS, may take some time ...\n");
memset(cmd,0,sizeof(cmd));
cmd[0] = INITIALIZE_ELEMENT_STATUS;
cmd[1] = ch->device->lun << 5;
err = ch_do_scsi(ch, cmd, NULL, 0, DMA_NONE);
- vprintk("... finished\n");
+ VPRINTK(KERN_INFO, "... finished\n");
return err;
}
(buffer[buffer[3]+18] << 8) | buffer[buffer[3]+19];
ch->counts[CHET_DT] =
(buffer[buffer[3]+20] << 8) | buffer[buffer[3]+21];
- vprintk("type #1 (mt): 0x%x+%d [medium transport]\n",
+ VPRINTK(KERN_INFO, "type #1 (mt): 0x%x+%d [medium transport]\n",
ch->firsts[CHET_MT],
ch->counts[CHET_MT]);
- vprintk("type #2 (st): 0x%x+%d [storage]\n",
+ VPRINTK(KERN_INFO, "type #2 (st): 0x%x+%d [storage]\n",
ch->firsts[CHET_ST],
ch->counts[CHET_ST]);
- vprintk("type #3 (ie): 0x%x+%d [import/export]\n",
+ VPRINTK(KERN_INFO, "type #3 (ie): 0x%x+%d [import/export]\n",
ch->firsts[CHET_IE],
ch->counts[CHET_IE]);
- vprintk("type #4 (dt): 0x%x+%d [data transfer]\n",
+ VPRINTK(KERN_INFO, "type #4 (dt): 0x%x+%d [data transfer]\n",
ch->firsts[CHET_DT],
ch->counts[CHET_DT]);
} else {
- vprintk("reading element address assigment page failed!\n");
+ VPRINTK(KERN_INFO, "reading element address assigment page failed!\n");
}
/* vendor specific element types */
continue;
ch->firsts[CHET_V1+i] = vendor_firsts[i];
ch->counts[CHET_V1+i] = vendor_counts[i];
- vprintk("type #%d (v%d): 0x%x+%d [%s, vendor specific]\n",
+ VPRINTK(KERN_INFO, "type #%d (v%d): 0x%x+%d [%s, vendor specific]\n",
i+5,i+1,vendor_firsts[i],vendor_counts[i],
vendor_labels[i]);
}
/* look up the devices of the data transfer elements */
- ch->dt = kmalloc(ch->counts[CHET_DT]*sizeof(struct scsi_device),
+ ch->dt = kcalloc(ch->counts[CHET_DT], sizeof(*ch->dt),
GFP_KERNEL);
if (!ch->dt) {
if (elem < CH_DT_MAX && -1 != dt_id[elem]) {
id = dt_id[elem];
lun = dt_lun[elem];
- vprintk("dt 0x%x: [insmod option] ",
+ VPRINTK(KERN_INFO, "dt 0x%x: [insmod option] ",
elem+ch->firsts[CHET_DT]);
} else if (0 != ch_read_element_status
(ch,elem+ch->firsts[CHET_DT],data)) {
- vprintk("dt 0x%x: READ ELEMENT STATUS failed\n",
+ VPRINTK(KERN_INFO, "dt 0x%x: READ ELEMENT STATUS failed\n",
elem+ch->firsts[CHET_DT]);
} else {
- vprintk("dt 0x%x: ",elem+ch->firsts[CHET_DT]);
+ VPRINTK(KERN_INFO, "dt 0x%x: ",elem+ch->firsts[CHET_DT]);
if (data[6] & 0x80) {
- if (verbose)
- printk("not this SCSI bus\n");
+ VPRINTK(KERN_CONT, "not this SCSI bus\n");
ch->dt[elem] = NULL;
} else if (0 == (data[6] & 0x30)) {
- if (verbose)
- printk("ID/LUN unknown\n");
+ VPRINTK(KERN_CONT, "ID/LUN unknown\n");
ch->dt[elem] = NULL;
} else {
id = ch->device->id;
}
}
if (-1 != id) {
- if (verbose)
- printk("ID %i, LUN %i, ",id,lun);
+ VPRINTK(KERN_CONT, "ID %i, LUN %i, ",id,lun);
ch->dt[elem] =
scsi_device_lookup(ch->device->host,
ch->device->channel,
id,lun);
if (!ch->dt[elem]) {
/* should not happen */
- if (verbose)
- printk("Huh? device not found!\n");
+ VPRINTK(KERN_CONT, "Huh? device not found!\n");
} else {
- if (verbose)
- printk("name: %8.8s %16.16s %4.4s\n",
- ch->dt[elem]->vendor,
- ch->dt[elem]->model,
- ch->dt[elem]->rev);
+ VPRINTK(KERN_CONT, "name: %8.8s %16.16s %4.4s\n",
+ ch->dt[elem]->vendor,
+ ch->dt[elem]->model,
+ ch->dt[elem]->rev);
}
}
}
{
u_char cmd[10];
- dprintk("position: 0x%x\n",elem);
+ DPRINTK("position: 0x%x\n",elem);
if (0 == trans)
trans = ch->firsts[CHET_MT];
memset(cmd,0,sizeof(cmd));
{
u_char cmd[12];
- dprintk("move: 0x%x => 0x%x\n",src,dest);
+ DPRINTK("move: 0x%x => 0x%x\n",src,dest);
if (0 == trans)
trans = ch->firsts[CHET_MT];
memset(cmd,0,sizeof(cmd));
{
u_char cmd[12];
- dprintk("exchange: 0x%x => 0x%x => 0x%x\n",
+ DPRINTK("exchange: 0x%x => 0x%x => 0x%x\n",
src,dest1,dest2);
if (0 == trans)
trans = ch->firsts[CHET_MT];
if (!buffer)
return -ENOMEM;
- dprintk("%s %s voltag: 0x%x => \"%s\"\n",
+ DPRINTK("%s %s voltag: 0x%x => \"%s\"\n",
clear ? "clear" : "set",
alternate ? "alternate" : "primary",
elem, tag);
}
put_user(data[2], dest+i);
if (data[2] & CESTATUS_EXCEPT)
- vprintk("element 0x%x: asc=0x%x, ascq=0x%x\n",
+ VPRINTK(KERN_INFO, "element 0x%x: asc=0x%x, ascq=0x%x\n",
ch->firsts[type]+i,
(int)data[4],(int)data[5]);
retval = ch_read_element_status
return -EFAULT;
if (0 != ch_checkrange(ch, pos.cp_type, pos.cp_unit)) {
- dprintk("CHIOPOSITION: invalid parameter\n");
+ DPRINTK("CHIOPOSITION: invalid parameter\n");
return -EBADSLT;
}
mutex_lock(&ch->lock);
if (0 != ch_checkrange(ch, mv.cm_fromtype, mv.cm_fromunit) ||
0 != ch_checkrange(ch, mv.cm_totype, mv.cm_tounit )) {
- dprintk("CHIOMOVE: invalid parameter\n");
+ DPRINTK("CHIOMOVE: invalid parameter\n");
return -EBADSLT;
}
if (0 != ch_checkrange(ch, mv.ce_srctype, mv.ce_srcunit ) ||
0 != ch_checkrange(ch, mv.ce_fdsttype, mv.ce_fdstunit) ||
0 != ch_checkrange(ch, mv.ce_sdsttype, mv.ce_sdstunit)) {
- dprintk("CHIOEXCHANGE: invalid parameter\n");
+ DPRINTK("CHIOEXCHANGE: invalid parameter\n");
return -EBADSLT;
}
}
} else if (ch->voltags) {
ch->voltags = 0;
- vprintk("device has no volume tag support\n");
+ VPRINTK(KERN_INFO, "device has no volume tag support\n");
goto voltag_retry;
}
kfree(buffer);
return -EFAULT;
if (0 != ch_checkrange(ch, csv.csv_type, csv.csv_unit)) {
- dprintk("CHIOSVOLTAG: invalid parameter\n");
+ DPRINTK("CHIOSVOLTAG: invalid parameter\n");
return -EBADSLT;
}
elem = ch->firsts[csv.csv_type] + csv.csv_unit;
u32 tag_mask = 1;
u8 tag_number = 0;
while (tag_mask & dcb->tag_mask
- && tag_number <= dcb->max_command) {
+ && tag_number < dcb->max_command) {
tag_mask = tag_mask << 1;
tag_number++;
}
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/workqueue.h>
+#include <linux/bitops.h>
#include <scsi/libfc.h>
#include <scsi/libfcoe.h>
#include "fnic_io.h"
/*
* Tag bits used for special requests.
*/
-#define BIT(nr) (1UL << (nr))
#define FNIC_TAG_ABORT BIT(30) /* tag bit indicating abort */
#define FNIC_TAG_DEV_RST BIT(29) /* indicates device reset */
#define FNIC_TAG_MASK (BIT(24) - 1) /* mask for lookup */
int __init generic_NCR5380_detect(struct scsi_host_template * tpnt)
{
static int current_override = 0;
- int count, i;
+ int count;
unsigned int *ports;
+#ifndef SCSI_G_NCR5380_MEM
+ int i;
unsigned long region_size = 16;
+#endif
static unsigned int __initdata ncr_53c400a_ports[] = {
0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
};
};
int flags = 0;
struct Scsi_Host *instance;
-#ifdef CONFIG_SCSI_G_NCR5380_MEM
+#ifdef SCSI_G_NCR5380_MEM
unsigned long base;
void __iomem *iomem;
#endif
overrides[0].board = BOARD_NCR53C400A;
else if (dtc_3181e != NCR_NOT_SET)
overrides[0].board = BOARD_DTC3181E;
-
+#ifndef SCSI_G_NCR5380_MEM
if (!current_override && isapnp_present()) {
struct pnp_dev *dev = NULL;
count = 0;
while ((dev = pnp_find_dev(NULL, ISAPNP_VENDOR('D', 'T', 'C'), ISAPNP_FUNCTION(0x436e), dev))) {
if (count >= NO_OVERRIDES)
break;
- if (pnp_device_attach(dev) < 0) {
- printk(KERN_ERR "dtc436e probe: attach failed\n");
+ if (pnp_device_attach(dev) < 0)
continue;
- }
if (pnp_activate_dev(dev) < 0) {
printk(KERN_ERR "dtc436e probe: activate failed\n");
pnp_device_detach(dev);
count++;
}
}
-
+#endif
tpnt->proc_name = "g_NCR5380";
for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
break;
}
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
if (ports) {
/* wakeup sequence for the NCR53C400A and DTC3181E */
#endif
instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
if (instance == NULL) {
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
release_region(overrides[current_override].NCR5380_map_name, region_size);
#else
iounmap(iomem);
}
instance->NCR5380_instance_name = overrides[current_override].NCR5380_map_name;
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
instance->n_io_port = region_size;
#else
- ((struct NCR5380_hostdata *)instance->hostdata).iomem = iomem;
+ ((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
#endif
NCR5380_init(instance, flags);
free_irq(instance->irq, instance);
NCR5380_exit(instance);
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
release_region(instance->NCR5380_instance_name, instance->n_io_port);
#else
- iounmap(((struct NCR5380_hostdata *)instance->hostdata).iomem);
+ iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem);
release_mem_region(instance->NCR5380_instance_name, NCR5380_region_size);
#endif
}
while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY);
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
{
int i;
for (i = 0; i < 128; i++)
dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
}
#else
- /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ /* implies SCSI_G_NCR5380_MEM */
memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
#endif
start += 128;
// FIXME - no timeout
}
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
{
int i;
for (i = 0; i < 128; i++)
dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
}
#else
- /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ /* implies SCSI_G_NCR5380_MEM */
memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
#endif
start += 128;
}
while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - timeout
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
{
for (i = 0; i < 128; i++)
NCR5380_write(C400_HOST_BUFFER, src[start + i]);
}
#else
- /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ /* implies SCSI_G_NCR5380_MEM */
memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
#endif
start += 128;
while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - no timeout
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
{
for (i = 0; i < 128; i++)
NCR5380_write(C400_HOST_BUFFER, src[start + i]);
}
#else
- /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ /* implies SCSI_G_NCR5380_MEM */
memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
#endif
start += 128;
module_param(dtc_3181e, int, 0);
MODULE_LICENSE("GPL");
-
+#ifndef SCSI_G_NCR5380_MEM
static struct isapnp_device_id id_table[] __devinitdata = {
{
ISAPNP_ANY_ID, ISAPNP_ANY_ID,
};
MODULE_DEVICE_TABLE(isapnp, id_table);
-
+#endif
__setup("ncr5380=", do_NCR5380_setup);
__setup("ncr53c400=", do_NCR53C400_setup);
#define __STRVAL(x) #x
#define STRVAL(x) __STRVAL(x)
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
#define NCR5380_map_config port
#define NCR5380_map_type int
NCR5380_map_name = (NCR5380_map_type)((instance)->NCR5380_instance_name)
#else
-/* therefore CONFIG_SCSI_G_NCR5380_MEM */
+/* therefore SCSI_G_NCR5380_MEM */
#define NCR5380_map_config memory
#define NCR5380_map_type unsigned long
register void __iomem *iomem
#define NCR5380_setup(instance) \
- iomem = (((struct NCR5380_hostdata *)(instance)->hostdata).iomem)
+ iomem = (((struct NCR5380_hostdata *)(instance)->hostdata)->iomem)
#endif
error = scsi_add_host(shp, NULL);
if (error)
- goto out_free_coal_stat;
+ goto out_free_ccb_phys;
list_add_tail(&ha->list, &gdth_instances);
gdth_timer_init();
{
switch (tgt->action) {
case IBMVFC_TGT_ACTION_DEL_RPORT:
+ if (action == IBMVFC_TGT_ACTION_DELETED_RPORT)
+ tgt->action = action;
+ case IBMVFC_TGT_ACTION_DELETED_RPORT:
break;
default:
if (action == IBMVFC_TGT_ACTION_DEL_RPORT)
}
/**
- * ibmvfc_abort_task_set - Abort outstanding commands to the device
- * @sdev: scsi device to abort commands
- *
- * This sends an Abort Task Set to the VIOS for the specified device. This does
- * NOT send any cancel to the VIOS. That must be done separately.
+ * ibmvfc_match_rport - Match function for specified remote port
+ * @evt: ibmvfc event struct
+ * @device: device to match (rport)
*
* Returns:
- * 0 on success / other on failure
+ * 1 if event matches rport / 0 if event does not match rport
**/
-static int ibmvfc_abort_task_set(struct scsi_device *sdev)
+static int ibmvfc_match_rport(struct ibmvfc_event *evt, void *rport)
{
- struct ibmvfc_host *vhost = shost_priv(sdev->host);
- struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
- struct ibmvfc_cmd *tmf;
- struct ibmvfc_event *evt, *found_evt;
- union ibmvfc_iu rsp_iu;
- struct ibmvfc_fcp_rsp *fc_rsp = &rsp_iu.cmd.rsp;
- int rsp_rc = -EBUSY;
- unsigned long flags;
- int rsp_code = 0;
+ struct fc_rport *cmd_rport;
- spin_lock_irqsave(vhost->host->host_lock, flags);
- found_evt = NULL;
- list_for_each_entry(evt, &vhost->sent, queue) {
- if (evt->cmnd && evt->cmnd->device == sdev) {
- found_evt = evt;
- break;
- }
- }
-
- if (!found_evt) {
- if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
- sdev_printk(KERN_INFO, sdev, "No events found to abort\n");
- spin_unlock_irqrestore(vhost->host->host_lock, flags);
- return 0;
- }
-
- if (vhost->state == IBMVFC_ACTIVE) {
- evt = ibmvfc_get_event(vhost);
- ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_CMD_FORMAT);
-
- tmf = &evt->iu.cmd;
- memset(tmf, 0, sizeof(*tmf));
- tmf->resp.va = (u64)evt->crq.ioba + offsetof(struct ibmvfc_cmd, rsp);
- tmf->resp.len = sizeof(tmf->rsp);
- tmf->frame_type = IBMVFC_SCSI_FCP_TYPE;
- tmf->payload_len = sizeof(tmf->iu);
- tmf->resp_len = sizeof(tmf->rsp);
- tmf->cancel_key = (unsigned long)sdev->hostdata;
- tmf->tgt_scsi_id = rport->port_id;
- int_to_scsilun(sdev->lun, &tmf->iu.lun);
- tmf->flags = (IBMVFC_NO_MEM_DESC | IBMVFC_TMF);
- tmf->iu.tmf_flags = IBMVFC_ABORT_TASK_SET;
- evt->sync_iu = &rsp_iu;
-
- init_completion(&evt->comp);
- rsp_rc = ibmvfc_send_event(evt, vhost, default_timeout);
+ if (evt->cmnd) {
+ cmd_rport = starget_to_rport(scsi_target(evt->cmnd->device));
+ if (cmd_rport == rport)
+ return 1;
}
+ return 0;
+}
- spin_unlock_irqrestore(vhost->host->host_lock, flags);
+/**
+ * ibmvfc_match_target - Match function for specified target
+ * @evt: ibmvfc event struct
+ * @device: device to match (starget)
+ *
+ * Returns:
+ * 1 if event matches starget / 0 if event does not match starget
+ **/
+static int ibmvfc_match_target(struct ibmvfc_event *evt, void *device)
+{
+ if (evt->cmnd && scsi_target(evt->cmnd->device) == device)
+ return 1;
+ return 0;
+}
- if (rsp_rc != 0) {
- sdev_printk(KERN_ERR, sdev, "Failed to send abort. rc=%d\n", rsp_rc);
- return -EIO;
- }
+/**
+ * ibmvfc_match_lun - Match function for specified LUN
+ * @evt: ibmvfc event struct
+ * @device: device to match (sdev)
+ *
+ * Returns:
+ * 1 if event matches sdev / 0 if event does not match sdev
+ **/
+static int ibmvfc_match_lun(struct ibmvfc_event *evt, void *device)
+{
+ if (evt->cmnd && evt->cmnd->device == device)
+ return 1;
+ return 0;
+}
- sdev_printk(KERN_INFO, sdev, "Aborting outstanding commands\n");
- wait_for_completion(&evt->comp);
+/**
+ * ibmvfc_wait_for_ops - Wait for ops to complete
+ * @vhost: ibmvfc host struct
+ * @device: device to match (starget or sdev)
+ * @match: match function
+ *
+ * Returns:
+ * SUCCESS / FAILED
+ **/
+static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device,
+ int (*match) (struct ibmvfc_event *, void *))
+{
+ struct ibmvfc_event *evt;
+ DECLARE_COMPLETION_ONSTACK(comp);
+ int wait;
+ unsigned long flags;
+ signed long timeout = IBMVFC_ABORT_WAIT_TIMEOUT * HZ;
- if (rsp_iu.cmd.status)
- rsp_code = ibmvfc_get_err_result(&rsp_iu.cmd);
+ ENTER;
+ do {
+ wait = 0;
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ list_for_each_entry(evt, &vhost->sent, queue) {
+ if (match(evt, device)) {
+ evt->eh_comp = ∁
+ wait++;
+ }
+ }
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
- if (rsp_code) {
- if (fc_rsp->flags & FCP_RSP_LEN_VALID)
- rsp_code = fc_rsp->data.info.rsp_code;
+ if (wait) {
+ timeout = wait_for_completion_timeout(&comp, timeout);
- sdev_printk(KERN_ERR, sdev, "Abort failed: %s (%x:%x) "
- "flags: %x fcp_rsp: %x, scsi_status: %x\n",
- ibmvfc_get_cmd_error(rsp_iu.cmd.status, rsp_iu.cmd.error),
- rsp_iu.cmd.status, rsp_iu.cmd.error, fc_rsp->flags, rsp_code,
- fc_rsp->scsi_status);
- rsp_rc = -EIO;
- } else
- sdev_printk(KERN_INFO, sdev, "Abort successful\n");
+ if (!timeout) {
+ wait = 0;
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ list_for_each_entry(evt, &vhost->sent, queue) {
+ if (match(evt, device)) {
+ evt->eh_comp = NULL;
+ wait++;
+ }
+ }
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ if (wait)
+ dev_err(vhost->dev, "Timed out waiting for aborted commands\n");
+ LEAVE;
+ return wait ? FAILED : SUCCESS;
+ }
+ }
+ } while (wait);
- spin_lock_irqsave(vhost->host->host_lock, flags);
- ibmvfc_free_event(evt);
- spin_unlock_irqrestore(vhost->host->host_lock, flags);
- return rsp_rc;
+ LEAVE;
+ return SUCCESS;
}
/**
}
/**
- * ibmvfc_match_target - Match function for specified target
+ * ibmvfc_match_key - Match function for specified cancel key
* @evt: ibmvfc event struct
- * @device: device to match (starget)
+ * @key: cancel key to match
*
* Returns:
- * 1 if event matches starget / 0 if event does not match starget
+ * 1 if event matches key / 0 if event does not match key
**/
-static int ibmvfc_match_target(struct ibmvfc_event *evt, void *device)
+static int ibmvfc_match_key(struct ibmvfc_event *evt, void *key)
{
- if (evt->cmnd && scsi_target(evt->cmnd->device) == device)
- return 1;
- return 0;
-}
+ unsigned long cancel_key = (unsigned long)key;
-/**
- * ibmvfc_match_lun - Match function for specified LUN
- * @evt: ibmvfc event struct
- * @device: device to match (sdev)
- *
- * Returns:
- * 1 if event matches sdev / 0 if event does not match sdev
- **/
-static int ibmvfc_match_lun(struct ibmvfc_event *evt, void *device)
-{
- if (evt->cmnd && evt->cmnd->device == device)
+ if (evt->crq.format == IBMVFC_CMD_FORMAT &&
+ evt->iu.cmd.cancel_key == cancel_key)
return 1;
return 0;
}
/**
- * ibmvfc_wait_for_ops - Wait for ops to complete
- * @vhost: ibmvfc host struct
- * @device: device to match (starget or sdev)
- * @match: match function
+ * ibmvfc_abort_task_set - Abort outstanding commands to the device
+ * @sdev: scsi device to abort commands
+ *
+ * This sends an Abort Task Set to the VIOS for the specified device. This does
+ * NOT send any cancel to the VIOS. That must be done separately.
*
* Returns:
- * SUCCESS / FAILED
+ * 0 on success / other on failure
**/
-static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device,
- int (*match) (struct ibmvfc_event *, void *))
+static int ibmvfc_abort_task_set(struct scsi_device *sdev)
{
- struct ibmvfc_event *evt;
- DECLARE_COMPLETION_ONSTACK(comp);
- int wait;
- unsigned long flags;
- signed long timeout = IBMVFC_ABORT_WAIT_TIMEOUT * HZ;
+ struct ibmvfc_host *vhost = shost_priv(sdev->host);
+ struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+ struct ibmvfc_cmd *tmf;
+ struct ibmvfc_event *evt, *found_evt;
+ union ibmvfc_iu rsp_iu;
+ struct ibmvfc_fcp_rsp *fc_rsp = &rsp_iu.cmd.rsp;
+ int rc, rsp_rc = -EBUSY;
+ unsigned long flags, timeout = IBMVFC_ABORT_TIMEOUT;
+ int rsp_code = 0;
- ENTER;
- do {
- wait = 0;
- spin_lock_irqsave(vhost->host->host_lock, flags);
- list_for_each_entry(evt, &vhost->sent, queue) {
- if (match(evt, device)) {
- evt->eh_comp = ∁
- wait++;
- }
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ found_evt = NULL;
+ list_for_each_entry(evt, &vhost->sent, queue) {
+ if (evt->cmnd && evt->cmnd->device == sdev) {
+ found_evt = evt;
+ break;
}
+ }
+
+ if (!found_evt) {
+ if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
+ sdev_printk(KERN_INFO, sdev, "No events found to abort\n");
spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ return 0;
+ }
- if (wait) {
- timeout = wait_for_completion_timeout(&comp, timeout);
+ if (vhost->state == IBMVFC_ACTIVE) {
+ evt = ibmvfc_get_event(vhost);
+ ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_CMD_FORMAT);
- if (!timeout) {
- wait = 0;
- spin_lock_irqsave(vhost->host->host_lock, flags);
- list_for_each_entry(evt, &vhost->sent, queue) {
- if (match(evt, device)) {
- evt->eh_comp = NULL;
- wait++;
- }
- }
- spin_unlock_irqrestore(vhost->host->host_lock, flags);
- if (wait)
- dev_err(vhost->dev, "Timed out waiting for aborted commands\n");
- LEAVE;
- return wait ? FAILED : SUCCESS;
- }
+ tmf = &evt->iu.cmd;
+ memset(tmf, 0, sizeof(*tmf));
+ tmf->resp.va = (u64)evt->crq.ioba + offsetof(struct ibmvfc_cmd, rsp);
+ tmf->resp.len = sizeof(tmf->rsp);
+ tmf->frame_type = IBMVFC_SCSI_FCP_TYPE;
+ tmf->payload_len = sizeof(tmf->iu);
+ tmf->resp_len = sizeof(tmf->rsp);
+ tmf->cancel_key = (unsigned long)sdev->hostdata;
+ tmf->tgt_scsi_id = rport->port_id;
+ int_to_scsilun(sdev->lun, &tmf->iu.lun);
+ tmf->flags = (IBMVFC_NO_MEM_DESC | IBMVFC_TMF);
+ tmf->iu.tmf_flags = IBMVFC_ABORT_TASK_SET;
+ evt->sync_iu = &rsp_iu;
+
+ init_completion(&evt->comp);
+ rsp_rc = ibmvfc_send_event(evt, vhost, default_timeout);
+ }
+
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+
+ if (rsp_rc != 0) {
+ sdev_printk(KERN_ERR, sdev, "Failed to send abort. rc=%d\n", rsp_rc);
+ return -EIO;
+ }
+
+ sdev_printk(KERN_INFO, sdev, "Aborting outstanding commands\n");
+ timeout = wait_for_completion_timeout(&evt->comp, timeout);
+
+ if (!timeout) {
+ rc = ibmvfc_cancel_all(sdev, IBMVFC_TMF_ABORT_TASK_SET);
+ if (!rc) {
+ rc = ibmvfc_wait_for_ops(vhost, sdev->hostdata, ibmvfc_match_key);
+ if (rc == SUCCESS)
+ rc = 0;
}
- } while (wait);
- LEAVE;
- return SUCCESS;
+ if (rc) {
+ sdev_printk(KERN_INFO, sdev, "Cancel failed, resetting host\n");
+ ibmvfc_reset_host(vhost);
+ rsp_rc = 0;
+ goto out;
+ }
+ }
+
+ if (rsp_iu.cmd.status)
+ rsp_code = ibmvfc_get_err_result(&rsp_iu.cmd);
+
+ if (rsp_code) {
+ if (fc_rsp->flags & FCP_RSP_LEN_VALID)
+ rsp_code = fc_rsp->data.info.rsp_code;
+
+ sdev_printk(KERN_ERR, sdev, "Abort failed: %s (%x:%x) "
+ "flags: %x fcp_rsp: %x, scsi_status: %x\n",
+ ibmvfc_get_cmd_error(rsp_iu.cmd.status, rsp_iu.cmd.error),
+ rsp_iu.cmd.status, rsp_iu.cmd.error, fc_rsp->flags, rsp_code,
+ fc_rsp->scsi_status);
+ rsp_rc = -EIO;
+ } else
+ sdev_printk(KERN_INFO, sdev, "Abort successful\n");
+
+out:
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ ibmvfc_free_event(evt);
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ return rsp_rc;
}
/**
return rc;
}
-/**
- * ibmvfc_dev_cancel_all_abts - Device iterated cancel all function
- * @sdev: scsi device struct
- * @data: return code
- *
- **/
-static void ibmvfc_dev_cancel_all_abts(struct scsi_device *sdev, void *data)
-{
- unsigned long *rc = data;
- *rc |= ibmvfc_cancel_all(sdev, IBMVFC_TMF_ABORT_TASK_SET);
-}
-
/**
* ibmvfc_dev_cancel_all_reset - Device iterated cancel all function
* @sdev: scsi device struct
*rc |= ibmvfc_cancel_all(sdev, IBMVFC_TMF_TGT_RESET);
}
-/**
- * ibmvfc_dev_abort_all - Device iterated abort task set function
- * @sdev: scsi device struct
- * @data: return code
- *
- **/
-static void ibmvfc_dev_abort_all(struct scsi_device *sdev, void *data)
-{
- unsigned long *rc = data;
- *rc |= ibmvfc_abort_task_set(sdev);
-}
-
/**
* ibmvfc_eh_target_reset_handler - Reset the target
* @cmd: scsi command struct
**/
static void ibmvfc_terminate_rport_io(struct fc_rport *rport)
{
- struct scsi_target *starget = to_scsi_target(&rport->dev);
- struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct Scsi_Host *shost = rport_to_shost(rport);
struct ibmvfc_host *vhost = shost_priv(shost);
- unsigned long cancel_rc = 0;
- unsigned long abort_rc = 0;
- int rc = FAILED;
+ struct fc_rport *dev_rport;
+ struct scsi_device *sdev;
+ unsigned long rc;
ENTER;
- starget_for_each_device(starget, &cancel_rc, ibmvfc_dev_cancel_all_abts);
- starget_for_each_device(starget, &abort_rc, ibmvfc_dev_abort_all);
+ shost_for_each_device(sdev, shost) {
+ dev_rport = starget_to_rport(scsi_target(sdev));
+ if (dev_rport != rport)
+ continue;
+ ibmvfc_cancel_all(sdev, IBMVFC_TMF_ABORT_TASK_SET);
+ ibmvfc_abort_task_set(sdev);
+ }
- if (!cancel_rc && !abort_rc)
- rc = ibmvfc_wait_for_ops(vhost, starget, ibmvfc_match_target);
+ rc = ibmvfc_wait_for_ops(vhost, rport, ibmvfc_match_rport);
if (rc == FAILED)
ibmvfc_issue_fc_host_lip(shost);
if (rport && tgt->action == IBMVFC_TGT_ACTION_DEL_RPORT) {
tgt_dbg(tgt, "Deleting rport\n");
list_del(&tgt->queue);
+ ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DELETED_RPORT);
spin_unlock_irqrestore(vhost->host->host_lock, flags);
fc_remote_port_delete(rport);
del_timer_sync(&tgt->timer);
kref_put(&tgt->kref, ibmvfc_release_tgt);
return;
+ } else if (rport && tgt->action == IBMVFC_TGT_ACTION_DELETED_RPORT) {
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ return;
}
if (rport) {
rport = tgt->rport;
tgt->rport = NULL;
list_del(&tgt->queue);
+ ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DELETED_RPORT);
spin_unlock_irqrestore(vhost->host->host_lock, flags);
if (rport)
fc_remote_port_delete(rport);
#include "viosrp.h"
#define IBMVFC_NAME "ibmvfc"
-#define IBMVFC_DRIVER_VERSION "1.0.8"
-#define IBMVFC_DRIVER_DATE "(June 17, 2010)"
+#define IBMVFC_DRIVER_VERSION "1.0.9"
+#define IBMVFC_DRIVER_DATE "(August 5, 2010)"
#define IBMVFC_DEFAULT_TIMEOUT 60
#define IBMVFC_ADISC_CANCEL_TIMEOUT 45
#define IBMVFC_ADISC_PLUS_CANCEL_TIMEOUT \
(IBMVFC_ADISC_TIMEOUT + IBMVFC_ADISC_CANCEL_TIMEOUT)
#define IBMVFC_INIT_TIMEOUT 120
+#define IBMVFC_ABORT_TIMEOUT 8
#define IBMVFC_ABORT_WAIT_TIMEOUT 40
#define IBMVFC_MAX_REQUESTS_DEFAULT 100
IBMVFC_TGT_ACTION_INIT,
IBMVFC_TGT_ACTION_INIT_WAIT,
IBMVFC_TGT_ACTION_DEL_RPORT,
+ IBMVFC_TGT_ACTION_DELETED_RPORT,
};
struct ibmvfc_target {
}
cmnd->result = cblk->tastat | (cblk->hastat << 16);
- WARN_ON(cmnd == NULL);
i91u_unmap_scb(host->pci_dev, cmnd);
cmnd->scsi_done(cmnd); /* Notify system DONE */
initio_release_scb(host, cblk); /* Release SCB for current channel */
--- /dev/null
+/*
+ * Export the iSCSI boot info to userland via sysfs.
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2010 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/capability.h>
+#include <linux/iscsi_boot_sysfs.h>
+
+
+MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>");
+MODULE_DESCRIPTION("sysfs interface and helpers to export iSCSI boot information");
+MODULE_LICENSE("GPL");
+/*
+ * The kobject and attribute structures.
+ */
+struct iscsi_boot_attr {
+ struct attribute attr;
+ int type;
+ ssize_t (*show) (void *data, int type, char *buf);
+};
+
+/*
+ * The routine called for all sysfs attributes.
+ */
+static ssize_t iscsi_boot_show_attribute(struct kobject *kobj,
+ struct attribute *attr, char *buf)
+{
+ struct iscsi_boot_kobj *boot_kobj =
+ container_of(kobj, struct iscsi_boot_kobj, kobj);
+ struct iscsi_boot_attr *boot_attr =
+ container_of(attr, struct iscsi_boot_attr, attr);
+ ssize_t ret = -EIO;
+ char *str = buf;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (boot_kobj->show)
+ ret = boot_kobj->show(boot_kobj->data, boot_attr->type, str);
+ return ret;
+}
+
+static const struct sysfs_ops iscsi_boot_attr_ops = {
+ .show = iscsi_boot_show_attribute,
+};
+
+static void iscsi_boot_kobj_release(struct kobject *kobj)
+{
+ struct iscsi_boot_kobj *boot_kobj =
+ container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+ kfree(boot_kobj->data);
+ kfree(boot_kobj);
+}
+
+static struct kobj_type iscsi_boot_ktype = {
+ .release = iscsi_boot_kobj_release,
+ .sysfs_ops = &iscsi_boot_attr_ops,
+};
+
+#define iscsi_boot_rd_attr(fnname, sysfs_name, attr_type) \
+static struct iscsi_boot_attr iscsi_boot_attr_##fnname = { \
+ .attr = { .name = __stringify(sysfs_name), .mode = 0444 }, \
+ .type = attr_type, \
+}
+
+/* Target attrs */
+iscsi_boot_rd_attr(tgt_index, index, ISCSI_BOOT_TGT_INDEX);
+iscsi_boot_rd_attr(tgt_flags, flags, ISCSI_BOOT_TGT_FLAGS);
+iscsi_boot_rd_attr(tgt_ip, ip-addr, ISCSI_BOOT_TGT_IP_ADDR);
+iscsi_boot_rd_attr(tgt_port, port, ISCSI_BOOT_TGT_PORT);
+iscsi_boot_rd_attr(tgt_lun, lun, ISCSI_BOOT_TGT_LUN);
+iscsi_boot_rd_attr(tgt_chap, chap-type, ISCSI_BOOT_TGT_CHAP_TYPE);
+iscsi_boot_rd_attr(tgt_nic, nic-assoc, ISCSI_BOOT_TGT_NIC_ASSOC);
+iscsi_boot_rd_attr(tgt_name, target-name, ISCSI_BOOT_TGT_NAME);
+iscsi_boot_rd_attr(tgt_chap_name, chap-name, ISCSI_BOOT_TGT_CHAP_NAME);
+iscsi_boot_rd_attr(tgt_chap_secret, chap-secret, ISCSI_BOOT_TGT_CHAP_SECRET);
+iscsi_boot_rd_attr(tgt_chap_rev_name, rev-chap-name,
+ ISCSI_BOOT_TGT_REV_CHAP_NAME);
+iscsi_boot_rd_attr(tgt_chap_rev_secret, rev-chap-name-secret,
+ ISCSI_BOOT_TGT_REV_CHAP_SECRET);
+
+static struct attribute *target_attrs[] = {
+ &iscsi_boot_attr_tgt_index.attr,
+ &iscsi_boot_attr_tgt_flags.attr,
+ &iscsi_boot_attr_tgt_ip.attr,
+ &iscsi_boot_attr_tgt_port.attr,
+ &iscsi_boot_attr_tgt_lun.attr,
+ &iscsi_boot_attr_tgt_chap.attr,
+ &iscsi_boot_attr_tgt_nic.attr,
+ &iscsi_boot_attr_tgt_name.attr,
+ &iscsi_boot_attr_tgt_chap_name.attr,
+ &iscsi_boot_attr_tgt_chap_secret.attr,
+ &iscsi_boot_attr_tgt_chap_rev_name.attr,
+ &iscsi_boot_attr_tgt_chap_rev_secret.attr,
+ NULL
+};
+
+static mode_t iscsi_boot_tgt_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int i)
+{
+ struct iscsi_boot_kobj *boot_kobj =
+ container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+ if (attr == &iscsi_boot_attr_tgt_index.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_INDEX);
+ else if (attr == &iscsi_boot_attr_tgt_flags.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_FLAGS);
+ else if (attr == &iscsi_boot_attr_tgt_ip.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_IP_ADDR);
+ else if (attr == &iscsi_boot_attr_tgt_port.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_PORT);
+ else if (attr == &iscsi_boot_attr_tgt_lun.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_LUN);
+ else if (attr == &iscsi_boot_attr_tgt_chap.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_CHAP_TYPE);
+ else if (attr == &iscsi_boot_attr_tgt_nic.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_NIC_ASSOC);
+ else if (attr == &iscsi_boot_attr_tgt_name.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_NAME);
+ else if (attr == &iscsi_boot_attr_tgt_chap_name.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_CHAP_NAME);
+ else if (attr == &iscsi_boot_attr_tgt_chap_secret.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_CHAP_SECRET);
+ else if (attr == &iscsi_boot_attr_tgt_chap_rev_name.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_REV_CHAP_NAME);
+ else if (attr == &iscsi_boot_attr_tgt_chap_rev_secret.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_TGT_REV_CHAP_SECRET);
+ return 0;
+}
+
+static struct attribute_group iscsi_boot_target_attr_group = {
+ .attrs = target_attrs,
+ .is_visible = iscsi_boot_tgt_attr_is_visible,
+};
+
+/* Ethernet attrs */
+iscsi_boot_rd_attr(eth_index, index, ISCSI_BOOT_ETH_INDEX);
+iscsi_boot_rd_attr(eth_flags, flags, ISCSI_BOOT_ETH_FLAGS);
+iscsi_boot_rd_attr(eth_ip, ip-addr, ISCSI_BOOT_ETH_IP_ADDR);
+iscsi_boot_rd_attr(eth_subnet, subnet-mask, ISCSI_BOOT_ETH_SUBNET_MASK);
+iscsi_boot_rd_attr(eth_origin, origin, ISCSI_BOOT_ETH_ORIGIN);
+iscsi_boot_rd_attr(eth_gateway, gateway, ISCSI_BOOT_ETH_GATEWAY);
+iscsi_boot_rd_attr(eth_primary_dns, primary-dns, ISCSI_BOOT_ETH_PRIMARY_DNS);
+iscsi_boot_rd_attr(eth_secondary_dns, secondary-dns,
+ ISCSI_BOOT_ETH_SECONDARY_DNS);
+iscsi_boot_rd_attr(eth_dhcp, dhcp, ISCSI_BOOT_ETH_DHCP);
+iscsi_boot_rd_attr(eth_vlan, vlan, ISCSI_BOOT_ETH_VLAN);
+iscsi_boot_rd_attr(eth_mac, mac, ISCSI_BOOT_ETH_MAC);
+iscsi_boot_rd_attr(eth_hostname, hostname, ISCSI_BOOT_ETH_HOSTNAME);
+
+static struct attribute *ethernet_attrs[] = {
+ &iscsi_boot_attr_eth_index.attr,
+ &iscsi_boot_attr_eth_flags.attr,
+ &iscsi_boot_attr_eth_ip.attr,
+ &iscsi_boot_attr_eth_subnet.attr,
+ &iscsi_boot_attr_eth_origin.attr,
+ &iscsi_boot_attr_eth_gateway.attr,
+ &iscsi_boot_attr_eth_primary_dns.attr,
+ &iscsi_boot_attr_eth_secondary_dns.attr,
+ &iscsi_boot_attr_eth_dhcp.attr,
+ &iscsi_boot_attr_eth_vlan.attr,
+ &iscsi_boot_attr_eth_mac.attr,
+ &iscsi_boot_attr_eth_hostname.attr,
+ NULL
+};
+
+static mode_t iscsi_boot_eth_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int i)
+{
+ struct iscsi_boot_kobj *boot_kobj =
+ container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+ if (attr == &iscsi_boot_attr_eth_index.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_INDEX);
+ else if (attr == &iscsi_boot_attr_eth_flags.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_FLAGS);
+ else if (attr == &iscsi_boot_attr_eth_ip.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_IP_ADDR);
+ else if (attr == &iscsi_boot_attr_eth_subnet.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_SUBNET_MASK);
+ else if (attr == &iscsi_boot_attr_eth_origin.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_ORIGIN);
+ else if (attr == &iscsi_boot_attr_eth_gateway.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_GATEWAY);
+ else if (attr == &iscsi_boot_attr_eth_primary_dns.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_PRIMARY_DNS);
+ else if (attr == &iscsi_boot_attr_eth_secondary_dns.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_SECONDARY_DNS);
+ else if (attr == &iscsi_boot_attr_eth_dhcp.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_DHCP);
+ else if (attr == &iscsi_boot_attr_eth_vlan.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_VLAN);
+ else if (attr == &iscsi_boot_attr_eth_mac.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_MAC);
+ else if (attr == &iscsi_boot_attr_eth_hostname.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_ETH_HOSTNAME);
+ return 0;
+}
+
+static struct attribute_group iscsi_boot_ethernet_attr_group = {
+ .attrs = ethernet_attrs,
+ .is_visible = iscsi_boot_eth_attr_is_visible,
+};
+
+/* Initiator attrs */
+iscsi_boot_rd_attr(ini_index, index, ISCSI_BOOT_INI_INDEX);
+iscsi_boot_rd_attr(ini_flags, flags, ISCSI_BOOT_INI_FLAGS);
+iscsi_boot_rd_attr(ini_isns, isns-server, ISCSI_BOOT_INI_ISNS_SERVER);
+iscsi_boot_rd_attr(ini_slp, slp-server, ISCSI_BOOT_INI_SLP_SERVER);
+iscsi_boot_rd_attr(ini_primary_radius, pri-radius-server,
+ ISCSI_BOOT_INI_PRI_RADIUS_SERVER);
+iscsi_boot_rd_attr(ini_secondary_radius, sec-radius-server,
+ ISCSI_BOOT_INI_SEC_RADIUS_SERVER);
+iscsi_boot_rd_attr(ini_name, initiator-name, ISCSI_BOOT_INI_INITIATOR_NAME);
+
+static struct attribute *initiator_attrs[] = {
+ &iscsi_boot_attr_ini_index.attr,
+ &iscsi_boot_attr_ini_flags.attr,
+ &iscsi_boot_attr_ini_isns.attr,
+ &iscsi_boot_attr_ini_slp.attr,
+ &iscsi_boot_attr_ini_primary_radius.attr,
+ &iscsi_boot_attr_ini_secondary_radius.attr,
+ &iscsi_boot_attr_ini_name.attr,
+ NULL
+};
+
+static mode_t iscsi_boot_ini_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int i)
+{
+ struct iscsi_boot_kobj *boot_kobj =
+ container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+ if (attr == &iscsi_boot_attr_ini_index.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_INI_INDEX);
+ if (attr == &iscsi_boot_attr_ini_flags.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_INI_FLAGS);
+ if (attr == &iscsi_boot_attr_ini_isns.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_INI_ISNS_SERVER);
+ if (attr == &iscsi_boot_attr_ini_slp.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_INI_SLP_SERVER);
+ if (attr == &iscsi_boot_attr_ini_primary_radius.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_INI_PRI_RADIUS_SERVER);
+ if (attr == &iscsi_boot_attr_ini_secondary_radius.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_INI_SEC_RADIUS_SERVER);
+ if (attr == &iscsi_boot_attr_ini_name.attr)
+ return boot_kobj->is_visible(boot_kobj->data,
+ ISCSI_BOOT_INI_INITIATOR_NAME);
+
+ return 0;
+}
+
+static struct attribute_group iscsi_boot_initiator_attr_group = {
+ .attrs = initiator_attrs,
+ .is_visible = iscsi_boot_ini_attr_is_visible,
+};
+
+static struct iscsi_boot_kobj *
+iscsi_boot_create_kobj(struct iscsi_boot_kset *boot_kset,
+ struct attribute_group *attr_group,
+ const char *name, int index, void *data,
+ ssize_t (*show) (void *data, int type, char *buf),
+ mode_t (*is_visible) (void *data, int type))
+{
+ struct iscsi_boot_kobj *boot_kobj;
+
+ boot_kobj = kzalloc(sizeof(*boot_kobj), GFP_KERNEL);
+ if (!boot_kobj)
+ return NULL;
+ INIT_LIST_HEAD(&boot_kobj->list);
+
+ boot_kobj->kobj.kset = boot_kset->kset;
+ if (kobject_init_and_add(&boot_kobj->kobj, &iscsi_boot_ktype,
+ NULL, name, index)) {
+ kfree(boot_kobj);
+ return NULL;
+ }
+ boot_kobj->data = data;
+ boot_kobj->show = show;
+ boot_kobj->is_visible = is_visible;
+
+ if (sysfs_create_group(&boot_kobj->kobj, attr_group)) {
+ /*
+ * We do not want to free this because the caller
+ * will assume that since the creation call failed
+ * the boot kobj was not setup and the normal release
+ * path is not being run.
+ */
+ boot_kobj->data = NULL;
+ kobject_put(&boot_kobj->kobj);
+ return NULL;
+ }
+ boot_kobj->attr_group = attr_group;
+
+ kobject_uevent(&boot_kobj->kobj, KOBJ_ADD);
+ /* Nothing broke so lets add it to the list. */
+ list_add_tail(&boot_kobj->list, &boot_kset->kobj_list);
+ return boot_kobj;
+}
+
+static void iscsi_boot_remove_kobj(struct iscsi_boot_kobj *boot_kobj)
+{
+ list_del(&boot_kobj->list);
+ sysfs_remove_group(&boot_kobj->kobj, boot_kobj->attr_group);
+ kobject_put(&boot_kobj->kobj);
+}
+
+/**
+ * iscsi_boot_create_target() - create boot target sysfs dir
+ * @boot_kset: boot kset
+ * @index: the target id
+ * @data: driver specific data for target
+ * @show: attr show function
+ * @is_visible: attr visibility function
+ *
+ * Note: The boot sysfs lib will free the data passed in for the caller
+ * when all refs to the target kobject have been released.
+ */
+struct iscsi_boot_kobj *
+iscsi_boot_create_target(struct iscsi_boot_kset *boot_kset, int index,
+ void *data,
+ ssize_t (*show) (void *data, int type, char *buf),
+ mode_t (*is_visible) (void *data, int type))
+{
+ return iscsi_boot_create_kobj(boot_kset, &iscsi_boot_target_attr_group,
+ "target%d", index, data, show, is_visible);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_target);
+
+/**
+ * iscsi_boot_create_initiator() - create boot initiator sysfs dir
+ * @boot_kset: boot kset
+ * @index: the initiator id
+ * @data: driver specific data
+ * @show: attr show function
+ * @is_visible: attr visibility function
+ *
+ * Note: The boot sysfs lib will free the data passed in for the caller
+ * when all refs to the initiator kobject have been released.
+ */
+struct iscsi_boot_kobj *
+iscsi_boot_create_initiator(struct iscsi_boot_kset *boot_kset, int index,
+ void *data,
+ ssize_t (*show) (void *data, int type, char *buf),
+ mode_t (*is_visible) (void *data, int type))
+{
+ return iscsi_boot_create_kobj(boot_kset,
+ &iscsi_boot_initiator_attr_group,
+ "initiator", index, data, show,
+ is_visible);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_initiator);
+
+/**
+ * iscsi_boot_create_ethernet() - create boot ethernet sysfs dir
+ * @boot_kset: boot kset
+ * @index: the ethernet device id
+ * @data: driver specific data
+ * @show: attr show function
+ * @is_visible: attr visibility function
+ *
+ * Note: The boot sysfs lib will free the data passed in for the caller
+ * when all refs to the ethernet kobject have been released.
+ */
+struct iscsi_boot_kobj *
+iscsi_boot_create_ethernet(struct iscsi_boot_kset *boot_kset, int index,
+ void *data,
+ ssize_t (*show) (void *data, int type, char *buf),
+ mode_t (*is_visible) (void *data, int type))
+{
+ return iscsi_boot_create_kobj(boot_kset,
+ &iscsi_boot_ethernet_attr_group,
+ "ethernet%d", index, data, show,
+ is_visible);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_ethernet);
+
+/**
+ * iscsi_boot_create_kset() - creates root sysfs tree
+ * @set_name: name of root dir
+ */
+struct iscsi_boot_kset *iscsi_boot_create_kset(const char *set_name)
+{
+ struct iscsi_boot_kset *boot_kset;
+
+ boot_kset = kzalloc(sizeof(*boot_kset), GFP_KERNEL);
+ if (!boot_kset)
+ return NULL;
+
+ boot_kset->kset = kset_create_and_add(set_name, NULL, firmware_kobj);
+ if (!boot_kset->kset) {
+ kfree(boot_kset);
+ return NULL;
+ }
+
+ INIT_LIST_HEAD(&boot_kset->kobj_list);
+ return boot_kset;
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_kset);
+
+/**
+ * iscsi_boot_create_host_kset() - creates root sysfs tree for a scsi host
+ * @hostno: host number of scsi host
+ */
+struct iscsi_boot_kset *iscsi_boot_create_host_kset(unsigned int hostno)
+{
+ struct iscsi_boot_kset *boot_kset;
+ char *set_name;
+
+ set_name = kasprintf(GFP_KERNEL, "iscsi_boot%u", hostno);
+ if (!set_name)
+ return NULL;
+
+ boot_kset = iscsi_boot_create_kset(set_name);
+ kfree(set_name);
+ return boot_kset;
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_host_kset);
+
+/**
+ * iscsi_boot_destroy_kset() - destroy kset and kobjects under it
+ * @boot_kset: boot kset
+ *
+ * This will remove the kset and kobjects and attrs under it.
+ */
+void iscsi_boot_destroy_kset(struct iscsi_boot_kset *boot_kset)
+{
+ struct iscsi_boot_kobj *boot_kobj, *tmp_kobj;
+
+ list_for_each_entry_safe(boot_kobj, tmp_kobj,
+ &boot_kset->kobj_list, list)
+ iscsi_boot_remove_kobj(boot_kobj);
+
+ kset_unregister(boot_kset->kset);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_destroy_kset);
struct fcoe_dev_stats *stats;
lport = shost_priv(sc_cmd->device->host);
- spin_unlock_irq(lport->host->host_lock);
rval = fc_remote_port_chkready(rport);
if (rval) {
sc_cmd->result = rval;
done(sc_cmd);
- goto out;
+ return 0;
}
+ spin_unlock_irq(lport->host->host_lock);
if (!*(struct fc_remote_port **)rport->dd_data) {
/*
uint8_t temp_sensor_support;
/* Fields used for heart beat. */
unsigned long last_completion_time;
+ unsigned long skipped_hb;
struct timer_list hb_tmofunc;
uint8_t hb_outstanding;
enum hba_temp_state over_temp_state;
uint32_t iocb_cnt;
uint32_t iocb_max;
atomic_t sdev_cnt;
+ uint8_t fips_spec_rev;
+ uint8_t fips_level;
};
static inline struct Scsi_Host *
#include <linux/interrupt.h>
#include <linux/aer.h>
#include <linux/gfp.h>
+#include <linux/kernel.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
return strlen(buf);
}
+/**
+ * lpfc_fips_level_show - Return the current FIPS level for the HBA
+ * @dev: class unused variable.
+ * @attr: device attribute, not used.
+ * @buf: on return contains the module description text.
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_fips_level_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", phba->fips_level);
+}
+
+/**
+ * lpfc_fips_rev_show - Return the FIPS Spec revision for the HBA
+ * @dev: class unused variable.
+ * @attr: device attribute, not used.
+ * @buf: on return contains the module description text.
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_fips_rev_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", phba->fips_spec_rev);
+}
+
/**
* lpfc_param_show - Return a cfg attribute value in decimal
*
static DEVICE_ATTR(used_xri, S_IRUGO, lpfc_used_xri_show, NULL);
static DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL);
static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL);
+static DEVICE_ATTR(lpfc_fips_level, S_IRUGO, lpfc_fips_level_show, NULL);
+static DEVICE_ATTR(lpfc_fips_rev, S_IRUGO, lpfc_fips_rev_show, NULL);
static char *lpfc_soft_wwn_key = "C99G71SL8032A";
/* Validate and store the new name */
for (i=0, j=0; i < 16; i++) {
- if ((*buf >= 'a') && (*buf <= 'f'))
- j = ((j << 4) | ((*buf++ -'a') + 10));
- else if ((*buf >= 'A') && (*buf <= 'F'))
- j = ((j << 4) | ((*buf++ -'A') + 10));
- else if ((*buf >= '0') && (*buf <= '9'))
- j = ((j << 4) | (*buf++ -'0'));
+ int value;
+
+ value = hex_to_bin(*buf++);
+ if (value >= 0)
+ j = (j << 4) | value;
else
return -EINVAL;
if (i % 2) {
/* Validate and store the new name */
for (i=0, j=0; i < 16; i++) {
- if ((*buf >= 'a') && (*buf <= 'f'))
- j = ((j << 4) | ((*buf++ -'a') + 10));
- else if ((*buf >= 'A') && (*buf <= 'F'))
- j = ((j << 4) | ((*buf++ -'A') + 10));
- else if ((*buf >= '0') && (*buf <= '9'))
- j = ((j << 4) | (*buf++ -'0'));
+ int value;
+
+ value = hex_to_bin(*buf++);
+ if (value >= 0)
+ j = (j << 4) | value;
else
return -EINVAL;
if (i % 2) {
# - Default will result in registering capabilities for all profiles.
#
*/
-unsigned int lpfc_prot_mask = SHOST_DIX_TYPE0_PROTECTION;
+unsigned int lpfc_prot_mask = SHOST_DIF_TYPE1_PROTECTION;
module_param(lpfc_prot_mask, uint, 0);
MODULE_PARM_DESC(lpfc_prot_mask, "host protection mask");
&dev_attr_iocb_hw,
&dev_attr_txq_hw,
&dev_attr_txcmplq_hw,
+ &dev_attr_lpfc_fips_level,
+ &dev_attr_lpfc_fips_rev,
NULL,
};
&dev_attr_lpfc_max_scsicmpl_time,
&dev_attr_lpfc_stat_data_ctrl,
&dev_attr_lpfc_static_vport,
+ &dev_attr_lpfc_fips_level,
+ &dev_attr_lpfc_fips_rev,
NULL,
};
mbox_req->inExtWLen * sizeof(uint32_t));
}
- pmboxq->context2 = ext;
- pmboxq->in_ext_byte_len =
- mbox_req->inExtWLen *
- sizeof(uint32_t);
- pmboxq->out_ext_byte_len =
- mbox_req->outExtWLen *
- sizeof(uint32_t);
- pmboxq->mbox_offset_word =
- mbox_req->mbOffset;
pmboxq->context2 = ext;
pmboxq->in_ext_byte_len =
mbox_req->inExtWLen * sizeof(uint32_t);
static inline void
lpfc_memcpy_to_slim( void __iomem *dest, void *src, unsigned int bytes)
{
- /* actually returns 1 byte past dest */
- memcpy_toio( dest, src, bytes);
+ __iowrite32_copy(dest, src, bytes);
}
static inline void
vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
spin_unlock_irq(shost->host_lock);
}
+ } else if ((phba->sli_rev == LPFC_SLI_REV4) &&
+ !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
+ /*
+ * Driver needs to re-reg VPI in order for f/w
+ * to update the MAC address.
+ */
+ lpfc_register_new_vport(phba, vport, ndlp);
+ return 0;
}
if (phba->sli_rev < LPFC_SLI_REV4) {
(irsp->un.ulpWord[4] != IOERR_SLI_ABORTED)) {
lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
"2611 FLOGI failed on registered "
- "FCF record fcf_index:%d, trying "
- "to perform round robin failover\n",
- phba->fcf.current_rec.fcf_indx);
+ "FCF record fcf_index(%d), status: "
+ "x%x/x%x, tmo:x%x, trying to perform "
+ "round robin failover\n",
+ phba->fcf.current_rec.fcf_indx,
+ irsp->ulpStatus, irsp->un.ulpWord[4],
+ irsp->ulpTimeout);
fcf_index = lpfc_sli4_fcf_rr_next_index_get(phba);
if (fcf_index == LPFC_FCOE_FCF_NEXT_NONE) {
/*
}
}
+ /* FLOGI failure */
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "2858 FLOGI failure Status:x%x/x%x TMO:x%x\n",
+ irsp->ulpStatus, irsp->un.ulpWord[4],
+ irsp->ulpTimeout);
+
/* Check for retry */
if (lpfc_els_retry(phba, cmdiocb, rspiocb))
goto out;
struct serv_parm *sp;
uint8_t name[sizeof(struct lpfc_name)];
uint32_t rc, keepDID = 0;
+ int put_node;
+ int put_rport;
/* Fabric nodes can have the same WWPN so we don't bother searching
* by WWPN. Just return the ndlp that was given to us.
/* Two ndlps cannot have the same did */
ndlp->nlp_DID = keepDID;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
+ /* Since we are swapping the ndlp passed in with the new one
+ * and the did has already been swapped, copy over the
+ * state and names.
+ */
+ memcpy(&new_ndlp->nlp_portname, &ndlp->nlp_portname,
+ sizeof(struct lpfc_name));
+ memcpy(&new_ndlp->nlp_nodename, &ndlp->nlp_nodename,
+ sizeof(struct lpfc_name));
+ new_ndlp->nlp_state = ndlp->nlp_state;
+ /* Fix up the rport accordingly */
+ rport = ndlp->rport;
+ if (rport) {
+ rdata = rport->dd_data;
+ put_node = rdata->pnode != NULL;
+ put_rport = ndlp->rport != NULL;
+ rdata->pnode = NULL;
+ ndlp->rport = NULL;
+ if (put_node)
+ lpfc_nlp_put(ndlp);
+ if (put_rport)
+ put_device(&rport->dev);
+ }
}
return new_ndlp;
}
retry = 0;
if (retry) {
+ if ((cmd == ELS_CMD_PLOGI) || (cmd == ELS_CMD_FDISC)) {
+ /* Stop retrying PLOGI and FDISC if in FCF discovery */
+ if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+ "2849 Stop retry ELS command "
+ "x%x to remote NPORT x%x, "
+ "Data: x%x x%x\n", cmd, did,
+ cmdiocb->retry, delay);
+ return 0;
+ }
+ }
/* Retry ELS command <elsCmd> to remote NPORT <did> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
if (mb->mbxStatus) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
- "0915 Register VPI failed: 0x%x\n",
- mb->mbxStatus);
+ "0915 Register VPI failed : Status: x%x"
+ " upd bit: x%x \n", mb->mbxStatus,
+ mb->un.varRegVpi.upd);
+ if (phba->sli_rev == LPFC_SLI_REV4 &&
+ mb->un.varRegVpi.upd)
+ goto mbox_err_exit ;
switch (mb->mbxStatus) {
case 0x11: /* unsupported feature */
} else
lpfc_do_scr_ns_plogi(phba, vport);
}
-
+mbox_err_exit:
/* Now, we decrement the ndlp reference count held for this
* callback function
*/
else
vport->fc_flag |= FC_LOGO_RCVD_DID_CHNG;
spin_unlock_irq(shost->host_lock);
+ } else if ((phba->sli_rev == LPFC_SLI_REV4) &&
+ !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
+ /*
+ * Driver needs to re-reg VPI in order for f/w
+ * to update the MAC address.
+ */
+ lpfc_register_new_vport(phba, vport, ndlp);
+ return ;
}
if (vport->fc_flag & FC_VPORT_NEEDS_INIT_VPI)
(status &
HA_RXMASK));
}
- if (pring->txq_cnt)
+ if ((phba->sli_rev == LPFC_SLI_REV4) && pring->txq_cnt)
lpfc_drain_txq(phba);
/*
* Turn on Ring interrupts
__lpfc_sli4_stop_fcf_redisc_wait_timer(phba);
else if (phba->fcf.fcf_flag & FCF_REDISC_FOV)
/* If in fast failover, mark it's completed */
- phba->fcf.fcf_flag &= ~(FCF_REDISC_FOV |
- FCF_DISCOVERY);
+ phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
spin_unlock_irq(&phba->hbalock);
lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
"2836 The new FCF record (x%x) "
spin_unlock_irq(&phba->hbalock);
lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
"2778 Start FCF table scan at linkup\n");
-
rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba,
LPFC_FCOE_FCF_GET_FIRST);
if (rc) {
spin_unlock_irq(&phba->hbalock);
goto out;
}
+ /* Reset FCF roundrobin bmask for new discovery */
+ memset(phba->fcf.fcf_rr_bmask, 0,
+ sizeof(*phba->fcf.fcf_rr_bmask));
}
return;
lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
{
struct lpfc_vport *vport = mboxq->vport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
if (mboxq->u.mb.mbxStatus) {
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
"HBA state x%x\n",
mboxq->u.mb.mbxStatus, vport->port_state);
}
+ spin_lock_irq(shost->host_lock);
+ phba->pport->fc_flag &= ~FC_VFI_REGISTERED;
+ spin_unlock_irq(shost->host_lock);
mempool_free(mboxq, phba->mbox_mem_pool);
return;
}
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag |= FCF_INIT_DISC;
spin_unlock_irq(&phba->hbalock);
+
+ /* Reset FCF roundrobin bmask for new discovery */
+ memset(phba->fcf.fcf_rr_bmask, 0, sizeof(*phba->fcf.fcf_rr_bmask));
+
rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST);
if (rc) {
typedef struct {
#ifdef __BIG_ENDIAN_BITFIELD
uint32_t rsvd1;
- uint32_t rsvd2:8;
+ uint32_t rsvd2:7;
+ uint32_t upd:1;
uint32_t sid:24;
uint32_t wwn[2];
uint32_t rsvd5;
#else /* __LITTLE_ENDIAN */
uint32_t rsvd1;
uint32_t sid:24;
- uint32_t rsvd2:8;
+ uint32_t upd:1;
+ uint32_t rsvd2:7;
uint32_t wwn[2];
uint32_t rsvd5;
uint16_t vpi;
uint32_t rsvd6; /* Reserved */
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd7 : 16; /* Reserved */
+ uint32_t fips_rev : 3; /* FIPS Spec Revision */
+ uint32_t fips_level : 4; /* FIPS Level */
+ uint32_t sec_err : 9; /* security crypto error */
uint32_t max_vpi : 16; /* Max number of virt N-Ports */
#else /* __LITTLE_ENDIAN */
uint32_t max_vpi : 16; /* Max number of virt N-Ports */
- uint32_t rsvd7 : 16; /* Reserved */
+ uint32_t sec_err : 9; /* security crypto error */
+ uint32_t fips_level : 4; /* FIPS Level */
+ uint32_t fips_rev : 3; /* FIPS Spec Revision */
#endif
} CONFIG_PORT_VAR;
static inline uint32_t
lpfc_bgs_get_bidir_bg_prof(uint32_t bgstat)
{
- return (le32_to_cpu(bgstat) & BGS_BIDIR_BG_PROF_MASK) >>
+ return (bgstat & BGS_BIDIR_BG_PROF_MASK) >>
BGS_BIDIR_BG_PROF_SHIFT;
}
static inline uint32_t
lpfc_bgs_get_bidir_err_cond(uint32_t bgstat)
{
- return (le32_to_cpu(bgstat) & BGS_BIDIR_ERR_COND_FLAGS_MASK) >>
+ return (bgstat & BGS_BIDIR_ERR_COND_FLAGS_MASK) >>
BGS_BIDIR_ERR_COND_SHIFT;
}
static inline uint32_t
lpfc_bgs_get_bg_prof(uint32_t bgstat)
{
- return (le32_to_cpu(bgstat) & BGS_BG_PROFILE_MASK) >>
+ return (bgstat & BGS_BG_PROFILE_MASK) >>
BGS_BG_PROFILE_SHIFT;
}
static inline uint32_t
lpfc_bgs_get_invalid_prof(uint32_t bgstat)
{
- return (le32_to_cpu(bgstat) & BGS_INVALID_PROF_MASK) >>
+ return (bgstat & BGS_INVALID_PROF_MASK) >>
BGS_INVALID_PROF_SHIFT;
}
static inline uint32_t
lpfc_bgs_get_uninit_dif_block(uint32_t bgstat)
{
- return (le32_to_cpu(bgstat) & BGS_UNINIT_DIF_BLOCK_MASK) >>
+ return (bgstat & BGS_UNINIT_DIF_BLOCK_MASK) >>
BGS_UNINIT_DIF_BLOCK_SHIFT;
}
static inline uint32_t
lpfc_bgs_get_hi_water_mark_present(uint32_t bgstat)
{
- return (le32_to_cpu(bgstat) & BGS_HI_WATER_MARK_PRESENT_MASK) >>
+ return (bgstat & BGS_HI_WATER_MARK_PRESENT_MASK) >>
BGS_HI_WATER_MARK_PRESENT_SHIFT;
}
static inline uint32_t
lpfc_bgs_get_reftag_err(uint32_t bgstat)
{
- return (le32_to_cpu(bgstat) & BGS_REFTAG_ERR_MASK) >>
+ return (bgstat & BGS_REFTAG_ERR_MASK) >>
BGS_REFTAG_ERR_SHIFT;
}
static inline uint32_t
lpfc_bgs_get_apptag_err(uint32_t bgstat)
{
- return (le32_to_cpu(bgstat) & BGS_APPTAG_ERR_MASK) >>
+ return (bgstat & BGS_APPTAG_ERR_MASK) >>
BGS_APPTAG_ERR_SHIFT;
}
static inline uint32_t
lpfc_bgs_get_guard_err(uint32_t bgstat)
{
- return (le32_to_cpu(bgstat) & BGS_GUARD_ERR_MASK) >>
+ return (bgstat & BGS_GUARD_ERR_MASK) >>
BGS_GUARD_ERR_SHIFT;
}
/* If there is no heart beat outstanding, issue a heartbeat command */
if (phba->cfg_enable_hba_heartbeat) {
if (!phba->hb_outstanding) {
- pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
- if (!pmboxq) {
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
- return;
- }
+ if ((!(psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) &&
+ (list_empty(&psli->mboxq))) {
+ pmboxq = mempool_alloc(phba->mbox_mem_pool,
+ GFP_KERNEL);
+ if (!pmboxq) {
+ mod_timer(&phba->hb_tmofunc,
+ jiffies +
+ HZ * LPFC_HB_MBOX_INTERVAL);
+ return;
+ }
- lpfc_heart_beat(phba, pmboxq);
- pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
- pmboxq->vport = phba->pport;
- retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
+ lpfc_heart_beat(phba, pmboxq);
+ pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
+ pmboxq->vport = phba->pport;
+ retval = lpfc_sli_issue_mbox(phba, pmboxq,
+ MBX_NOWAIT);
+
+ if (retval != MBX_BUSY &&
+ retval != MBX_SUCCESS) {
+ mempool_free(pmboxq,
+ phba->mbox_mem_pool);
+ mod_timer(&phba->hb_tmofunc,
+ jiffies +
+ HZ * LPFC_HB_MBOX_INTERVAL);
+ return;
+ }
+ phba->skipped_hb = 0;
+ phba->hb_outstanding = 1;
+ } else if (time_before_eq(phba->last_completion_time,
+ phba->skipped_hb)) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2857 Last completion time not "
+ " updated in %d ms\n",
+ jiffies_to_msecs(jiffies
+ - phba->last_completion_time));
+ } else
+ phba->skipped_hb = jiffies;
- if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
- mempool_free(pmboxq, phba->mbox_mem_pool);
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
- return;
- }
mod_timer(&phba->hb_tmofunc,
jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
- phba->hb_outstanding = 1;
return;
} else {
/*
if (!ndlp)
return 0;
}
- if (phba->pport->port_state <= LPFC_FLOGI)
+ if (phba->pport->port_state < LPFC_FLOGI)
return NULL;
/* If virtual link is not yet instantiated ignore CVL */
- if (vport->port_state <= LPFC_FDISC)
+ if ((vport != phba->pport) && (vport->port_state < LPFC_FDISC))
return NULL;
shost = lpfc_shost_from_vport(vport);
if (!shost)
"evt_tag:x%x, fcf_index:x%x\n",
acqe_fcoe->event_tag,
acqe_fcoe->index);
- /* If the FCF discovery is in progress, do nothing. */
- spin_lock_irq(&phba->hbalock);
- if (phba->hba_flag & FCF_DISC_INPROGRESS) {
- spin_unlock_irq(&phba->hbalock);
- break;
- }
- /* If fast FCF failover rescan event is pending, do nothing */
- if (phba->fcf.fcf_flag & FCF_REDISC_EVT) {
- spin_unlock_irq(&phba->hbalock);
- break;
- }
- spin_unlock_irq(&phba->hbalock);
-
- if ((phba->fcf.fcf_flag & FCF_DISCOVERY) &&
- !(phba->fcf.fcf_flag & FCF_REDISC_FOV)) {
+ if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
/*
* During period of FCF discovery, read the FCF
* table record indexed by the event to update
acqe_fcoe->index);
rc = lpfc_sli4_read_fcf_rec(phba, acqe_fcoe->index);
}
- /* If the FCF has been in discovered state, do nothing. */
+
+ /* If the FCF discovery is in progress, do nothing. */
spin_lock_irq(&phba->hbalock);
+ if (phba->hba_flag & FCF_DISC_INPROGRESS) {
+ spin_unlock_irq(&phba->hbalock);
+ break;
+ }
+ /* If fast FCF failover rescan event is pending, do nothing */
+ if (phba->fcf.fcf_flag & FCF_REDISC_EVT) {
+ spin_unlock_irq(&phba->hbalock);
+ break;
+ }
+
+ /* If the FCF has been in discovered state, do nothing. */
if (phba->fcf.fcf_flag & FCF_SCAN_DONE) {
spin_unlock_irq(&phba->hbalock);
break;
}
spin_unlock_irq(&phba->hbalock);
+
/* Otherwise, scan the entire FCF table and re-discover SAN */
lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
"2770 Start FCF table scan due to new FCF "
"2549 FCF disconnected from network index 0x%x"
" tag 0x%x\n", acqe_fcoe->index,
acqe_fcoe->event_tag);
- /* If the event is not for currently used fcf do nothing */
- if (phba->fcf.current_rec.fcf_indx != acqe_fcoe->index)
- break;
- /* We request port to rediscover the entire FCF table for
- * a fast recovery from case that the current FCF record
- * is no longer valid if we are not in the middle of FCF
- * failover process already.
+ /*
+ * If we are in the middle of FCF failover process, clear
+ * the corresponding FCF bit in the roundrobin bitmap.
*/
spin_lock_irq(&phba->hbalock);
if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
lpfc_sli4_fcf_rr_index_clear(phba, acqe_fcoe->index);
break;
}
+ spin_unlock_irq(&phba->hbalock);
+
+ /* If the event is not for currently used fcf do nothing */
+ if (phba->fcf.current_rec.fcf_indx != acqe_fcoe->index)
+ break;
+
+ /*
+ * Otherwise, request the port to rediscover the entire FCF
+ * table for a fast recovery from case that the current FCF
+ * is no longer valid as we are not in the middle of FCF
+ * failover process already.
+ */
+ spin_lock_irq(&phba->hbalock);
/* Mark the fast failover process in progress */
phba->fcf.fcf_flag |= FCF_DEAD_DISC;
spin_unlock_irq(&phba->hbalock);
+
lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
"2771 Start FCF fast failover process due to "
"FCF DEAD event: evt_tag:x%x, fcf_index:x%x "
* as a link down to FCF registration.
*/
lpfc_sli4_fcf_dead_failthrough(phba);
- } else
- /* Handling fast FCF failover to a DEAD FCF event
- * is considered equalivant to receiving CVL to all
- * vports.
+ } else {
+ /* Reset FCF roundrobin bmask for new discovery */
+ memset(phba->fcf.fcf_rr_bmask, 0,
+ sizeof(*phba->fcf.fcf_rr_bmask));
+ /*
+ * Handling fast FCF failover to a DEAD FCF event is
+ * considered equalivant to receiving CVL to all vports.
*/
lpfc_sli4_perform_all_vport_cvl(phba);
+ }
break;
case LPFC_FCOE_EVENT_TYPE_CVL:
lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
* the current registered FCF entry.
*/
lpfc_retry_pport_discovery(phba);
- }
+ } else
+ /*
+ * Reset FCF roundrobin bmask for new
+ * discovery.
+ */
+ memset(phba->fcf.fcf_rr_bmask, 0,
+ sizeof(*phba->fcf.fcf_rr_bmask));
}
break;
default:
lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb)
{
MAILBOX_t *mb = &pmb->u.mb;
+ struct lpfc_hba *phba = vport->phba;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
-
+ /*
+ * Set the re-reg VPI bit for f/w to update the MAC address.
+ */
+ if ((phba->sli_rev == LPFC_SLI_REV4) &&
+ !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI))
+ mb->un.varRegVpi.upd = 1;
mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base;
mb->un.varRegVpi.sid = vport->fc_myDID;
mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base;
bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);
pde5->reftag = reftag;
- /* Endian convertion if necessary for PDE5 */
+ /* Endianness conversion if necessary for PDE5 */
pde5->word0 = cpu_to_le32(pde5->word0);
pde5->reftag = cpu_to_le32(pde5->reftag);
bf_set(pde6_ai, pde6, 1);
bf_set(pde6_apptagval, pde6, apptagval);
- /* Endian convertion if necessary for PDE6 */
+ /* Endianness conversion if necessary for PDE6 */
pde6->word0 = cpu_to_le32(pde6->word0);
pde6->word1 = cpu_to_le32(pde6->word1);
pde6->word2 = cpu_to_le32(pde6->word2);
bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);
pde5->reftag = reftag;
- /* Endian convertion if necessary for PDE5 */
+ /* Endianness conversion if necessary for PDE5 */
pde5->word0 = cpu_to_le32(pde5->word0);
pde5->reftag = cpu_to_le32(pde5->reftag);
bf_set(pde6_ai, pde6, 1);
bf_set(pde6_apptagval, pde6, apptagval);
- /* Endian convertion if necessary for PDE6 */
+ /* Endianness conversion if necessary for PDE6 */
pde6->word0 = cpu_to_le32(pde6->word0);
pde6->word1 = cpu_to_le32(pde6->word1);
pde6->word2 = cpu_to_le32(pde6->word2);
} else
spin_unlock_irq(&phba->hbalock);
- lpfc_printf_log(phba, KERN_ERR,LOG_SLI,
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"0318 Failed to allocate IOTAG.last IOTAG is %d\n",
psli->last_iotag);
phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED |
LPFC_SLI3_HBQ_ENABLED |
LPFC_SLI3_CRP_ENABLED |
- LPFC_SLI3_BG_ENABLED);
+ LPFC_SLI3_BG_ENABLED |
+ LPFC_SLI3_DSS_ENABLED);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0442 Adapter failed to init, mbxCmd x%x "
} else
phba->max_vpi = 0;
- if (pmb->u.mb.un.varCfgPort.gdss)
+ phba->fips_level = 0;
+ phba->fips_spec_rev = 0;
+ if (pmb->u.mb.un.varCfgPort.gdss) {
phba->sli3_options |= LPFC_SLI3_DSS_ENABLED;
+ phba->fips_level = pmb->u.mb.un.varCfgPort.fips_level;
+ phba->fips_spec_rev = pmb->u.mb.un.varCfgPort.fips_rev;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2850 Security Crypto Active. FIPS x%d "
+ "(Spec Rev: x%d)",
+ phba->fips_level, phba->fips_spec_rev);
+ }
+ if (pmb->u.mb.un.varCfgPort.sec_err) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2856 Config Port Security Crypto "
+ "Error: x%x ",
+ pmb->u.mb.un.varCfgPort.sec_err);
+ }
if (pmb->u.mb.un.varCfgPort.gerbm)
phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
if (pmb->u.mb.un.varCfgPort.gcrp)
switch (bf_get(lpfc_cqe_code, &cqevt)) {
case CQE_CODE_COMPL_WQE:
/* Process the WQ/RQ complete event */
+ phba->last_completion_time = jiffies;
workposted = lpfc_sli4_sp_handle_els_wcqe(phba,
(struct lpfc_wcqe_complete *)&cqevt);
break;
break;
case CQE_CODE_XRI_ABORTED:
/* Process the WQ XRI abort event */
+ phba->last_completion_time = jiffies;
workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
(struct sli4_wcqe_xri_aborted *)&cqevt);
break;
case CQE_CODE_RECEIVE:
/* Process the RQ event */
+ phba->last_completion_time = jiffies;
workposted = lpfc_sli4_sp_handle_rcqe(phba,
(struct lpfc_rcqe *)&cqevt);
break;
{
struct lpfc_wcqe_release wcqe;
bool workposted = false;
- unsigned long iflag;
/* Copy the work queue CQE and convert endian order if needed */
lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
case CQE_CODE_COMPL_WQE:
/* Process the WQ complete event */
- spin_lock_irqsave(&phba->hbalock, iflag);
phba->last_completion_time = jiffies;
- spin_unlock_irqrestore(&phba->hbalock, iflag);
lpfc_sli4_fp_handle_fcp_wcqe(phba,
(struct lpfc_wcqe_complete *)&wcqe);
break;
break;
case CQE_CODE_XRI_ABORTED:
/* Process the WQ XRI abort event */
+ phba->last_completion_time = jiffies;
workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
(struct sli4_wcqe_xri_aborted *)&wcqe);
break;
spin_lock_irq(&phba->hbalock);
phba->hba_flag |= FCF_DISC_INPROGRESS;
spin_unlock_irq(&phba->hbalock);
- /* Reset FCF round robin index bmask for new scan */
- if (fcf_index == LPFC_FCOE_FCF_GET_FIRST) {
- memset(phba->fcf.fcf_rr_bmask, 0,
- sizeof(*phba->fcf.fcf_rr_bmask));
+ /* Reset eligible FCF count for new scan */
+ if (fcf_index == LPFC_FCOE_FCF_GET_FIRST)
phba->fcf.eligible_fcf_cnt = 0;
- }
error = 0;
}
fail_fcf_scan:
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.15"
+#define LPFC_DRIVER_VERSION "8.3.16"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp"
return PTR_ERR(bio);
}
- bio->bi_rw &= ~(1 << BIO_RW);
+ bio->bi_rw &= ~REQ_WRITE;
or->in.bio = bio;
or->in.total_bytes = bio->bi_size;
return 0;
{
_osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, len);
WARN_ON(or->out.bio || or->out.total_bytes);
- WARN_ON(0 == bio_rw_flagged(bio, BIO_RW));
+ WARN_ON(0 == (bio->bi_rw & REQ_WRITE));
or->out.bio = bio;
or->out.total_bytes = len;
}
if (IS_ERR(bio))
return PTR_ERR(bio);
- bio->bi_rw |= (1 << BIO_RW); /* FIXME: bio_set_dir() */
+ bio->bi_rw |= REQ_WRITE; /* FIXME: bio_set_dir() */
osd_req_write(or, obj, offset, bio, len);
return 0;
}
{
_osd_req_encode_common(or, OSD_ACT_READ, obj, offset, len);
WARN_ON(or->in.bio || or->in.total_bytes);
- WARN_ON(1 == bio_rw_flagged(bio, BIO_RW));
+ WARN_ON(1 == (bio->bi_rw & REQ_WRITE));
or->in.bio = bio;
or->in.total_bytes = len;
}
}
/* find a free minor number */
- for (i=0; os_scsi_tapes[i] && i<osst_max_dev; i++);
+ for (i = 0; i < osst_max_dev && os_scsi_tapes[i]; i++)
+ ;
if(i >= osst_max_dev) panic ("Scsi_devices corrupt (osst)");
dev_num = i;
circularQ = &pm8001_ha->inbnd_q_tbl[0];
memset(&nvmd_req, 0, sizeof(nvmd_req));
rc = pm8001_tag_alloc(pm8001_ha, &tag);
- if (rc)
+ if (rc) {
+ kfree(fw_control_context);
return rc;
+ }
ccb = &pm8001_ha->ccb_info[tag];
ccb->ccb_tag = tag;
ccb->fw_control_context = fw_control_context;
ioctl_payload->length);
memset(&nvmd_req, 0, sizeof(nvmd_req));
rc = pm8001_tag_alloc(pm8001_ha, &tag);
- if (rc)
+ if (rc) {
+ kfree(fw_control_context);
return rc;
+ }
ccb = &pm8001_ha->ccb_info[tag];
ccb->fw_control_context = fw_control_context;
ccb->ccb_tag = tag;
fw_control->len, 0) != 0) {
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("Mem alloc failure\n"));
+ kfree(fw_control_context);
return -ENOMEM;
}
}
fw_control_context->virtAddr = buffer;
fw_control_context->len = fw_control->len;
rc = pm8001_tag_alloc(pm8001_ha, &tag);
- if (rc)
+ if (rc) {
+ kfree(fw_control_context);
return rc;
+ }
ccb = &pm8001_ha->ccb_info[tag];
ccb->fw_control_context = fw_control_context;
ccb->ccb_tag = tag;
module_param(ql2xmaxqueues, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xmaxqueues,
"Enables MQ settings "
- "Default is 1 for single queue. Set it to number \
- of queues in MQ mode.");
+ "Default is 1 for single queue. Set it to number "
+ "of queues in MQ mode.");
int ql2xmultique_tag;
module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR);
#include "ql4_dbg.h"
#include "ql4_nx.h"
+#if defined(CONFIG_PCIEAER)
+#include <linux/aer.h>
+#else
+/* AER releated */
+static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev)
+{
+ return -EINVAL;
+}
+static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev)
+{
+ return -EINVAL;
+}
+static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
+{
+ return -EINVAL;
+}
+#endif
+
#ifndef PCI_DEVICE_ID_QLOGIC_ISP4010
#define PCI_DEVICE_ID_QLOGIC_ISP4010 0x4010
#endif
#define ISCSI_ALIAS_SIZE 32 /* ISCSI Alias name size */
#define ISCSI_NAME_SIZE 0xE0 /* ISCSI Name size */
+#define QL4_SESS_RECOVERY_TMO 30 /* iSCSI session */
+ /* recovery timeout */
+
#define LSDW(x) ((u32)((u64)(x)))
#define MSDW(x) ((u32)((((u64)(x)) >> 16) >> 16))
uint32_t default_time2wait; /* Default Min time between
* relogins (+aens) */
- atomic_t port_down_timer; /* Device connection timer */
atomic_t retry_relogin_timer; /* Min Time between relogins
* (4000 only) */
atomic_t relogin_timer; /* Max Time to wait for relogin to complete */
#define AF_MSI_ENABLED 16 /* 0x00010000 */
#define AF_MSIX_ENABLED 17 /* 0x00020000 */
#define AF_MBOX_COMMAND_NOPOLL 18 /* 0x00040000 */
-
+#define AF_FW_RECOVERY 19 /* 0x00080000 */
+#define AF_EEH_BUSY 20 /* 0x00100000 */
+#define AF_PCI_CHANNEL_IO_PERM_FAILURE 21 /* 0x00200000 */
unsigned long dpc_flags;
uint32_t timer_active;
/* Recovery Timers */
- uint32_t port_down_retry_count;
uint32_t discovery_wait;
atomic_t check_relogin_timeouts;
uint32_t retry_reset_ha_cnt;
return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022;
}
+/* Note: Currently AER/EEH is now supported only for 8022 cards
+ * This function needs to be updated when AER/EEH is enabled
+ * for other cards.
+ */
+static inline int is_aer_supported(struct scsi_qla_host *ha)
+{
+ return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022;
+}
+
static inline int adapter_up(struct scsi_qla_host *ha)
{
return (test_bit(AF_ONLINE, &ha->flags) != 0) &&
}; /* 200 */
struct mbx_sys_info {
- uint8_t board_id_str[16]; /* Keep board ID string first */
- /* in this structure for GUI. */
- uint16_t board_id; /* board ID code */
- uint16_t phys_port_cnt; /* number of physical network ports */
- uint16_t port_num; /* network port for this PCI function */
+ uint8_t board_id_str[16]; /* 0-f Keep board ID string first */
+ /* in this structure for GUI. */
+ uint16_t board_id; /* 10-11 board ID code */
+ uint16_t phys_port_cnt; /* 12-13 number of physical network ports */
+ uint16_t port_num; /* 14-15 network port for this PCI function */
/* (port 0 is first port) */
- uint8_t mac_addr[6]; /* MAC address for this PCI function */
- uint32_t iscsi_pci_func_cnt; /* number of iSCSI PCI functions */
- uint32_t pci_func; /* this PCI function */
- unsigned char serial_number[16]; /* serial number string */
- uint8_t reserved[16];
+ uint8_t mac_addr[6]; /* 16-1b MAC address for this PCI function */
+ uint32_t iscsi_pci_func_cnt; /* 1c-1f number of iSCSI PCI functions */
+ uint32_t pci_func; /* 20-23 this PCI function */
+ unsigned char serial_number[16]; /* 24-33 serial number string */
+ uint8_t reserved[12]; /* 34-3f */
};
struct crash_record {
void qla4xxx_process_response_queue(struct scsi_qla_host *ha);
void qla4xxx_wake_dpc(struct scsi_qla_host *ha);
void qla4xxx_get_conn_event_log(struct scsi_qla_host *ha);
+void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha);
void qla4_8xxx_pci_config(struct scsi_qla_host *);
int qla4_8xxx_iospace_config(struct scsi_qla_host *ha);
int qla4_8xxx_device_state_handler(struct scsi_qla_host *ha);
void qla4_8xxx_need_qsnt_handler(struct scsi_qla_host *ha);
void qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha);
+inline void qla4_8xxx_set_drv_active(struct scsi_qla_host *ha);
extern int ql4xextended_error_logging;
extern int ql4xdiscoverywait;
DEBUG2(printk("scsi%ld: %s: unable to get firmware "
"state\n", ha->host_no, __func__));
break;
-
}
if (ha->firmware_state & FW_STATE_ERROR) {
{
int status = QLA_ERROR;
+ if (is_aer_supported(ha) &&
+ test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))
+ return status;
+
+ /* For 82xx, stop firmware before initializing because if BIOS
+ * has previously initialized firmware, then driver's initialize
+ * firmware will fail. */
+ if (is_qla8022(ha))
+ qla4_8xxx_stop_firmware(ha);
+
ql4_printk(KERN_INFO, ha, "Initializing firmware..\n");
if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR) {
DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware "
}
ddb_entry->fw_ddb_index = fw_ddb_index;
- atomic_set(&ddb_entry->port_down_timer, ha->port_down_retry_count);
atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY);
atomic_set(&ddb_entry->relogin_timer, 0);
atomic_set(&ddb_entry->relogin_retry_count, 0);
/* Device is back online. */
if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) {
atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
- atomic_set(&ddb_entry->port_down_timer,
- ha->port_down_retry_count);
atomic_set(&ddb_entry->relogin_retry_count, 0);
atomic_set(&ddb_entry->relogin_timer, 0);
clear_bit(DF_RELOGIN, &ddb_entry->flags);
/* Calculate number of free request entries. */
if ((req_cnt + 2) >= ha->req_q_count) {
- cnt = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
+ cnt = (uint16_t) ha->isp_ops->rd_shdw_req_q_out(ha);
if (ha->request_in < cnt)
ha->req_q_count = cnt - ha->request_in;
else
unsigned long flags = 0;
uint8_t reqs_count = 0;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return IRQ_HANDLED;
+
ha->isr_count++;
status = qla4_8xxx_rd_32(ha, ISR_INT_VECTOR);
if (!(status & ha->nx_legacy_intr.int_vec_bit))
"pointer\n", ha->host_no, __func__));
return status;
}
+
+ if (is_qla8022(ha) &&
+ test_bit(AF_FW_RECOVERY, &ha->flags)) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: prematurely "
+ "completing mbx cmd as firmware recovery detected\n",
+ ha->host_no, __func__));
+ return status;
+ }
+
+ if ((is_aer_supported(ha)) &&
+ (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))) {
+ DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Perm failure on EEH, "
+ "timeout MBX Exiting.\n", ha->host_no, __func__));
+ return status;
+ }
+
/* Mailbox code active */
wait_count = MBOX_TOV * 100;
while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) {
if (time_after_eq(jiffies, wait_count))
break;
+
/*
* Service the interrupt.
* The ISR will save the mailbox status registers
/* Check for mailbox timeout. */
if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) {
+ if (is_qla8022(ha) &&
+ test_bit(AF_FW_RECOVERY, &ha->flags)) {
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "scsi%ld: %s: prematurely completing mbx cmd as "
+ "firmware recovery detected\n",
+ ha->host_no, __func__));
+ goto mbox_exit;
+ }
DEBUG2(printk("scsi%ld: Mailbox Cmd 0x%08X timed out ...,"
" Scheduling Adapter Reset\n", ha->host_no,
mbx_cmd[0]));
return status;
}
+void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha)
+{
+ set_bit(AF_FW_RECOVERY, &ha->flags);
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: set FW RECOVERY!\n",
+ ha->host_no, __func__);
+
+ if (test_bit(AF_MBOX_COMMAND, &ha->flags)) {
+ if (test_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags)) {
+ complete(&ha->mbx_intr_comp);
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw "
+ "recovery, doing premature completion of "
+ "mbx cmd\n", ha->host_no, __func__);
+
+ } else {
+ set_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw "
+ "recovery, doing premature completion of "
+ "polling mbx cmd\n", ha->host_no, __func__);
+ }
+ }
+}
+
static uint8_t
qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma)
min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
/* Save Command Line Paramater info */
- ha->port_down_retry_count = le16_to_cpu(init_fw_cb->conn_ka_timeout);
ha->discovery_wait = ql4xdiscoverywait;
if (ha->acb_version == ACB_SUPPORTED) {
return QLA_SUCCESS;
}
-static inline void
+inline void
qla4_8xxx_set_drv_active(struct scsi_qla_host *ha)
{
uint32_t drv_active;
static inline int
qla4_8xxx_need_reset(struct scsi_qla_host *ha)
{
- uint32_t drv_state;
+ uint32_t drv_state, drv_active;
int rval;
+ drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
rval = drv_state & (1 << (ha->func_num * 4));
+ if ((test_bit(AF_EEH_BUSY, &ha->flags)) && drv_active)
+ rval = 1;
+
return rval;
}
uint16_t cnt, chksum;
uint16_t *wptr;
struct qla_fdt_layout *fdt;
- uint16_t mid, fid;
+ uint16_t mid = 0;
+ uint16_t fid = 0;
struct ql82xx_hw_data *hw = &ha->hw;
hw->flash_conf_off = FARX_ACCESS_FLASH_CONF;
qla4_8xxx_clear_rst_ready(ha);
qla4_8xxx_idc_unlock(ha);
+ if (rval == QLA_SUCCESS)
+ clear_bit(AF_FW_RECOVERY, &ha->flags);
+
return rval;
}
goto exit_validate_mac82;
}
- if (mbox_sts[4] < sizeof(*sys_info)) {
+ /* Make sure we receive the minimum required data to cache internally */
+ if (mbox_sts[4] < offsetof(struct mbx_sys_info, reserved)) {
DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO data receive"
" error (%x)\n", ha->host_no, __func__, mbox_sts[4]));
goto exit_validate_mac82;
if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) {
atomic_set(&ddb_entry->state, DDB_STATE_DEAD);
- DEBUG2(printk("scsi%ld: %s: ddb [%d] port down retry count "
+ DEBUG2(printk("scsi%ld: %s: ddb [%d] session recovery timeout "
"of (%d) secs exhausted, marking device DEAD.\n",
ha->host_no, __func__, ddb_entry->fw_ddb_index,
- ha->port_down_retry_count));
+ QL4_SESS_RECOVERY_TMO));
qla4xxx_wake_dpc(ha);
}
{
int err;
- ddb_entry->sess->recovery_tmo = ddb_entry->ha->port_down_retry_count;
+ ddb_entry->sess->recovery_tmo = QL4_SESS_RECOVERY_TMO;
+
err = iscsi_add_session(ddb_entry->sess, ddb_entry->fw_ddb_index);
if (err) {
DEBUG2(printk(KERN_ERR "Could not add session.\n"));
struct srb *srb;
int rval;
+ if (test_bit(AF_EEH_BUSY, &ha->flags)) {
+ if (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))
+ cmd->result = DID_NO_CONNECT << 16;
+ else
+ cmd->result = DID_REQUEUE << 16;
+ goto qc_fail_command;
+ }
+
if (!sess) {
cmd->result = DID_IMM_RETRY << 16;
goto qc_fail_command;
uint32_t fw_heartbeat_counter, halt_status;
fw_heartbeat_counter = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER);
+ /* If PEG_ALIVE_COUNTER is 0xffffffff, AER/EEH is in progress, ignore */
+ if (fw_heartbeat_counter == 0xffffffff) {
+ DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Device in frozen "
+ "state, QLA82XX_PEG_ALIVE_COUNTER is 0xffffffff\n",
+ ha->host_no, __func__));
+ return;
+ }
if (ha->fw_heartbeat_counter == fw_heartbeat_counter) {
ha->seconds_since_last_heartbeat++;
ha->seconds_since_last_heartbeat = 0;
halt_status = qla4_8xxx_rd_32(ha,
QLA82XX_PEG_HALT_STATUS1);
+
/* Since we cannot change dev_state in interrupt
* context, set appropriate DPC flag then wakeup
* DPC */
set_bit(DPC_RESET_HA, &ha->dpc_flags);
}
qla4xxx_wake_dpc(ha);
+ qla4xxx_mailbox_premature_completion(ha);
}
}
ha->fw_heartbeat_counter = fw_heartbeat_counter;
ha->host_no, __func__);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
qla4xxx_wake_dpc(ha);
+ qla4xxx_mailbox_premature_completion(ha);
} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
!test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) {
printk("scsi%ld: %s: HW State: NEED QUIES!\n",
{
struct ddb_entry *ddb_entry, *dtemp;
int start_dpc = 0;
+ uint16_t w;
+
+ /* If we are in the middle of AER/EEH processing
+ * skip any processing and reschedule the timer
+ */
+ if (test_bit(AF_EEH_BUSY, &ha->flags)) {
+ mod_timer(&ha->timer, jiffies + HZ);
+ return;
+ }
+
+ /* Hardware read to trigger an EEH error during mailbox waits. */
+ if (!pci_channel_offline(ha->pdev))
+ pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
if (test_bit(AF_HBA_GOING_AWAY, &ha->flags)) {
DEBUG2(ql4_printk(KERN_INFO, ha, "%s exited. HBA GOING AWAY\n",
/* Initialization not yet finished. Don't do anything yet. */
if (!test_bit(AF_INIT_DONE, &ha->flags))
- return;
+ goto do_dpc_exit;
+
+ if (test_bit(AF_EEH_BUSY, &ha->flags)) {
+ DEBUG2(printk(KERN_INFO "scsi%ld: %s: flags = %lx\n",
+ ha->host_no, __func__, ha->flags));
+ goto do_dpc_exit;
+ }
/* HBA is in the process of being permanently disabled.
* Don't process anything */
}
}
}
+
+do_dpc_exit:
clear_bit(AF_DPC_SCHEDULED, &ha->flags);
}
ha->host = host;
ha->host_no = host->host_no;
+ pci_enable_pcie_error_reporting(pdev);
+
/* Setup Runtime configurable options */
if (is_qla8022(ha)) {
ha->isp_ops = &qla4_8xxx_isp_ops;
ha->isp_ops = &qla4xxx_isp_ops;
}
+ /* Set EEH reset type to fundamental if required by hba */
+ if (is_qla8022(ha))
+ pdev->needs_freset = 1;
+
/* Configure PCI I/O space. */
ret = ha->isp_ops->iospace_config(ha);
if (ret)
}
}
+ pci_save_state(ha->pdev);
ha->isp_ops->enable_intrs(ha);
/* Start timer thread. */
qla4xxx_free_adapter(ha);
probe_failed_ioconfig:
+ pci_disable_pcie_error_reporting(pdev);
scsi_host_put(ha->host);
probe_disable_device:
scsi_host_put(ha->host);
+ pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
int done = 0;
struct srb *rp;
uint32_t max_wait_time = EH_WAIT_CMD_TOV;
+ int ret = SUCCESS;
+
+ /* Dont wait on command if PCI error is being handled
+ * by PCI AER driver
+ */
+ if (unlikely(pci_channel_offline(ha->pdev)) ||
+ (test_bit(AF_EEH_BUSY, &ha->flags))) {
+ ql4_printk(KERN_WARNING, ha, "scsi%ld: Return from %s\n",
+ ha->host_no, __func__);
+ return ret;
+ }
do {
/* Checking to see if its returned to OS */
return return_status;
}
+/* PCI AER driver recovers from all correctable errors w/o
+ * driver intervention. For uncorrectable errors PCI AER
+ * driver calls the following device driver's callbacks
+ *
+ * - Fatal Errors - link_reset
+ * - Non-Fatal Errors - driver's pci_error_detected() which
+ * returns CAN_RECOVER, NEED_RESET or DISCONNECT.
+ *
+ * PCI AER driver calls
+ * CAN_RECOVER - driver's pci_mmio_enabled(), mmio_enabled
+ * returns RECOVERED or NEED_RESET if fw_hung
+ * NEED_RESET - driver's slot_reset()
+ * DISCONNECT - device is dead & cannot recover
+ * RECOVERED - driver's pci_resume()
+ */
+static pci_ers_result_t
+qla4xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct scsi_qla_host *ha = pci_get_drvdata(pdev);
+
+ ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: error detected:state %x\n",
+ ha->host_no, __func__, state);
+
+ if (!is_aer_supported(ha))
+ return PCI_ERS_RESULT_NONE;
+
+ switch (state) {
+ case pci_channel_io_normal:
+ clear_bit(AF_EEH_BUSY, &ha->flags);
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+ set_bit(AF_EEH_BUSY, &ha->flags);
+ qla4xxx_mailbox_premature_completion(ha);
+ qla4xxx_free_irqs(ha);
+ pci_disable_device(pdev);
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ set_bit(AF_EEH_BUSY, &ha->flags);
+ set_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags);
+ qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * qla4xxx_pci_mmio_enabled() gets called if
+ * qla4xxx_pci_error_detected() returns PCI_ERS_RESULT_CAN_RECOVER
+ * and read/write to the device still works.
+ **/
+static pci_ers_result_t
+qla4xxx_pci_mmio_enabled(struct pci_dev *pdev)
+{
+ struct scsi_qla_host *ha = pci_get_drvdata(pdev);
+
+ if (!is_aer_supported(ha))
+ return PCI_ERS_RESULT_NONE;
+
+ if (test_bit(AF_FW_RECOVERY, &ha->flags)) {
+ ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: firmware hang -- "
+ "mmio_enabled\n", ha->host_no, __func__);
+ return PCI_ERS_RESULT_NEED_RESET;
+ } else
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
+{
+ uint32_t rval = QLA_ERROR;
+ int fn;
+ struct pci_dev *other_pdev = NULL;
+
+ ql4_printk(KERN_WARNING, ha, "scsi%ld: In %s\n", ha->host_no, __func__);
+
+ set_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
+
+ if (test_bit(AF_ONLINE, &ha->flags)) {
+ clear_bit(AF_ONLINE, &ha->flags);
+ qla4xxx_mark_all_devices_missing(ha);
+ qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
+ qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
+ }
+
+ fn = PCI_FUNC(ha->pdev->devfn);
+ while (fn > 0) {
+ fn--;
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Finding PCI device at "
+ "func %x\n", ha->host_no, __func__, fn);
+ /* Get the pci device given the domain, bus,
+ * slot/function number */
+ other_pdev =
+ pci_get_domain_bus_and_slot(pci_domain_nr(ha->pdev->bus),
+ ha->pdev->bus->number, PCI_DEVFN(PCI_SLOT(ha->pdev->devfn),
+ fn));
+
+ if (!other_pdev)
+ continue;
+
+ if (atomic_read(&other_pdev->enable_cnt)) {
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Found PCI "
+ "func in enabled state%x\n", ha->host_no,
+ __func__, fn);
+ pci_dev_put(other_pdev);
+ break;
+ }
+ pci_dev_put(other_pdev);
+ }
+
+ /* The first function on the card, the reset owner will
+ * start & initialize the firmware. The other functions
+ * on the card will reset the firmware context
+ */
+ if (!fn) {
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn being reset "
+ "0x%x is the owner\n", ha->host_no, __func__,
+ ha->pdev->devfn);
+
+ qla4_8xxx_idc_lock(ha);
+ qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
+ QLA82XX_DEV_COLD);
+
+ qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION,
+ QLA82XX_IDC_VERSION);
+
+ qla4_8xxx_idc_unlock(ha);
+ clear_bit(AF_FW_RECOVERY, &ha->flags);
+ rval = qla4xxx_initialize_adapter(ha, PRESERVE_DDB_LIST);
+ qla4_8xxx_idc_lock(ha);
+
+ if (rval != QLA_SUCCESS) {
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: "
+ "FAILED\n", ha->host_no, __func__);
+ qla4_8xxx_clear_drv_active(ha);
+ qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
+ QLA82XX_DEV_FAILED);
+ } else {
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: "
+ "READY\n", ha->host_no, __func__);
+ qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
+ QLA82XX_DEV_READY);
+ /* Clear driver state register */
+ qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0);
+ qla4_8xxx_set_drv_active(ha);
+ ha->isp_ops->enable_intrs(ha);
+ }
+ qla4_8xxx_idc_unlock(ha);
+ } else {
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn 0x%x is not "
+ "the reset owner\n", ha->host_no, __func__,
+ ha->pdev->devfn);
+ if ((qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE) ==
+ QLA82XX_DEV_READY)) {
+ clear_bit(AF_FW_RECOVERY, &ha->flags);
+ rval = qla4xxx_initialize_adapter(ha,
+ PRESERVE_DDB_LIST);
+ if (rval == QLA_SUCCESS)
+ ha->isp_ops->enable_intrs(ha);
+ qla4_8xxx_idc_lock(ha);
+ qla4_8xxx_set_drv_active(ha);
+ qla4_8xxx_idc_unlock(ha);
+ }
+ }
+ clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
+ return rval;
+}
+
+static pci_ers_result_t
+qla4xxx_pci_slot_reset(struct pci_dev *pdev)
+{
+ pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT;
+ struct scsi_qla_host *ha = pci_get_drvdata(pdev);
+ int rc;
+
+ ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: slot_reset\n",
+ ha->host_no, __func__);
+
+ if (!is_aer_supported(ha))
+ return PCI_ERS_RESULT_NONE;
+
+ /* Restore the saved state of PCIe device -
+ * BAR registers, PCI Config space, PCIX, MSI,
+ * IOV states
+ */
+ pci_restore_state(pdev);
+
+ /* pci_restore_state() clears the saved_state flag of the device
+ * save restored state which resets saved_state flag
+ */
+ pci_save_state(pdev);
+
+ /* Initialize device or resume if in suspended state */
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Cant re-enable "
+ "device after reset\n", ha->host_no, __func__);
+ goto exit_slot_reset;
+ }
+
+ ret = qla4xxx_request_irqs(ha);
+ if (ret) {
+ ql4_printk(KERN_WARNING, ha, "Failed to reserve interrupt %d"
+ " already in use.\n", pdev->irq);
+ goto exit_slot_reset;
+ }
+
+ if (is_qla8022(ha)) {
+ if (qla4_8xxx_error_recovery(ha) == QLA_SUCCESS) {
+ ret = PCI_ERS_RESULT_RECOVERED;
+ goto exit_slot_reset;
+ } else
+ goto exit_slot_reset;
+ }
+
+exit_slot_reset:
+ ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Return=%x\n"
+ "device after reset\n", ha->host_no, __func__, ret);
+ return ret;
+}
+
+static void
+qla4xxx_pci_resume(struct pci_dev *pdev)
+{
+ struct scsi_qla_host *ha = pci_get_drvdata(pdev);
+ int ret;
+
+ ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: pci_resume\n",
+ ha->host_no, __func__);
+
+ ret = qla4xxx_wait_for_hba_online(ha);
+ if (ret != QLA_SUCCESS) {
+ ql4_printk(KERN_ERR, ha, "scsi%ld: %s: the device failed to "
+ "resume I/O from slot/link_reset\n", ha->host_no,
+ __func__);
+ }
+
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+ clear_bit(AF_EEH_BUSY, &ha->flags);
+}
+
+static struct pci_error_handlers qla4xxx_err_handler = {
+ .error_detected = qla4xxx_pci_error_detected,
+ .mmio_enabled = qla4xxx_pci_mmio_enabled,
+ .slot_reset = qla4xxx_pci_slot_reset,
+ .resume = qla4xxx_pci_resume,
+};
+
static struct pci_device_id qla4xxx_pci_tbl[] = {
{
.vendor = PCI_VENDOR_ID_QLOGIC,
.id_table = qla4xxx_pci_tbl,
.probe = qla4xxx_probe_adapter,
.remove = qla4xxx_remove_adapter,
+ .err_handler = &qla4xxx_err_handler,
};
static int __init qla4xxx_module_init(void)
* See LICENSE.qla4xxx for copyright and licensing details.
*/
-#define QLA4XXX_DRIVER_VERSION "5.02.00-k2"
+#define QLA4XXX_DRIVER_VERSION "5.02.00-k3"
static int __devinit qpti_map_regs(struct qlogicpti *qpti)
{
- struct of_device *op = qpti->op;
+ struct platform_device *op = qpti->op;
qpti->qregs = of_ioremap(&op->resource[0], 0,
resource_size(&op->resource[0]),
static int __devinit qpti_register_irq(struct qlogicpti *qpti)
{
- struct of_device *op = qpti->op;
+ struct platform_device *op = qpti->op;
qpti->qhost->irq = qpti->irq = op->archdata.irqs[0];
static void __devinit qpti_get_scsi_id(struct qlogicpti *qpti)
{
- struct of_device *op = qpti->op;
+ struct platform_device *op = qpti->op;
struct device_node *dp;
dp = op->dev.of_node;
static void qpti_get_bursts(struct qlogicpti *qpti)
{
- struct of_device *op = qpti->op;
+ struct platform_device *op = qpti->op;
u8 bursts, bmask;
bursts = of_getintprop_default(op->dev.of_node, "burst-sizes", 0xff);
*/
static int __devinit qpti_map_queues(struct qlogicpti *qpti)
{
- struct of_device *op = qpti->op;
+ struct platform_device *op = qpti->op;
#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN)
qpti->res_cpu = dma_alloc_coherent(&op->dev,
.use_clustering = ENABLE_CLUSTERING,
};
-static int __devinit qpti_sbus_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit qpti_sbus_probe(struct platform_device *op, const struct of_device_id *match)
{
struct scsi_host_template *tpnt = match->data;
struct device_node *dp = op->dev.of_node;
return -ENODEV;
}
-static int __devexit qpti_sbus_remove(struct of_device *op)
+static int __devexit qpti_sbus_remove(struct platform_device *op)
{
struct qlogicpti *qpti = dev_get_drvdata(&op->dev);
u_int req_in_ptr; /* index of next request slot */
u_int res_out_ptr; /* index of next result slot */
long send_marker; /* must we send a marker? */
- struct of_device *op;
+ struct platform_device *op;
unsigned long __pad;
int cmd_count[MAX_TARGETS];
"changed. The Linux SCSI layer does not "
"automatically adjust these parameters.\n");
- if (blk_barrier_rq(scmd->request))
+ if (scmd->request->cmd_flags & REQ_HARDBARRIER)
/*
* barrier requests should always retry on UA
* otherwise block will get a spurious error
*/
return SUCCESS;
case RESERVATION_CONFLICT:
- /*
- * let issuer deal with this, it could be just fine
- */
- return SUCCESS;
+ if (scmd->cmnd[0] == TEST_UNIT_READY)
+ /* it is a success, we probed the device and
+ * found it */
+ return SUCCESS;
+ /* otherwise, we failed to send the command */
+ return FAILED;
case QUEUE_FULL:
scsi_handle_queue_full(scmd->device);
/* fall through */
case BUSY:
+ return NEEDS_RETRY;
default:
return FAILED;
}
case DID_OK:
break;
case DID_BUS_BUSY:
- return blk_failfast_transport(scmd->request);
+ return (scmd->request->cmd_flags & REQ_FAILFAST_TRANSPORT);
case DID_PARITY:
- return blk_failfast_dev(scmd->request);
+ return (scmd->request->cmd_flags & REQ_FAILFAST_DEV);
case DID_ERROR:
if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
status_byte(scmd->result) == RESERVATION_CONFLICT)
return 0;
/* fall through */
case DID_SOFT_ERROR:
- return blk_failfast_driver(scmd->request);
+ return (scmd->request->cmd_flags & REQ_FAILFAST_DRIVER);
}
switch (status_byte(scmd->result)) {
* assume caller has checked sense and determinted
* the check condition was retryable.
*/
- return blk_failfast_dev(scmd->request);
+ if (scmd->request->cmd_flags & REQ_FAILFAST_DEV ||
+ scmd->request->cmd_type == REQ_TYPE_BLOCK_PC)
+ return 1;
}
return 0;
{
struct scsi_cmnd *cmd = req->special;
- req->cmd_flags &= ~REQ_DONTPREP;
+ blk_unprep_request(req);
req->special = NULL;
scsi_put_command(cmd);
sense_deferred = scsi_sense_is_deferred(&sshdr);
}
- if (blk_pc_request(req)) { /* SG_IO ioctl from block level */
+ if (req->cmd_type == REQ_TYPE_BLOCK_PC) { /* SG_IO ioctl from block level */
req->errors = result;
if (result) {
if (sense_valid && req->sense) {
}
}
- BUG_ON(blk_bidi_rq(req)); /* bidi not support for !blk_pc_request yet */
+ /* no bidi support for !REQ_TYPE_BLOCK_PC yet */
+ BUG_ON(blk_bidi_rq(req));
/*
* Next deal with any sectors which we were able to correctly
err_exit:
scsi_release_buffers(cmd);
- if (error == BLKPREP_KILL)
- scsi_put_command(cmd);
- else /* BLKPREP_DEFER */
- scsi_unprep_request(cmd->request);
-
+ scsi_put_command(cmd);
+ cmd->request->special = NULL;
return error;
}
EXPORT_SYMBOL(scsi_init_io);
blk_start_request(req);
- if (unlikely(cmd == NULL)) {
- printk(KERN_CRIT "impossible request in %s.\n",
- __func__);
- BUG();
- }
-
sdev = cmd->device;
starget = scsi_target(sdev);
shost = sdev->host;
dprintk("cmd %p %d %u\n", cmd, cmd->sc_data_direction,
rq_data_dir(cmd->request));
scsi_unmap_user_pages(tcmd);
+ tcmd->rq->bio = NULL;
scsi_host_put_command(scsi_tgt_cmd_to_host(cmd), cmd);
}
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/kernel.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport.h>
/* Validate and store the new name */
for (i=0, j=0; i < 16; i++) {
- if ((*ns >= 'a') && (*ns <= 'f'))
- j = ((j << 4) | ((*ns++ -'a') + 10));
- else if ((*ns >= 'A') && (*ns <= 'F'))
- j = ((j << 4) | ((*ns++ -'A') + 10));
- else if ((*ns >= '0') && (*ns <= '9'))
- j = ((j << 4) | (*ns++ -'0'));
+ int value;
+
+ value = hex_to_bin(*ns++);
+ if (value >= 0)
+ j = (j << 4) | value;
else
return -EINVAL;
if (i % 2) {
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/delay.h>
+#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/string_helpers.h>
#include <linux/async.h>
* object after last put) */
static DEFINE_MUTEX(sd_ref_mutex);
-struct kmem_cache *sd_cdb_cache;
-mempool_t *sd_cdb_pool;
+static struct kmem_cache *sd_cdb_cache;
+static mempool_t *sd_cdb_pool;
static const char *sd_cache_types[] = {
"write through", "none", "write back",
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
- const int len = strlen(sd_cache_types[i]);
+ len = strlen(sd_cache_types[i]);
if (strncmp(sd_cache_types[i], buf, len) == 0 &&
buf[len] == '\n') {
ct = i;
}
/**
- * sd_prepare_discard - unmap blocks on thinly provisioned device
+ * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device
+ * @sdp: scsi device to operate one
* @rq: Request to prepare
*
* Will issue either UNMAP or WRITE SAME(16) depending on preference
* indicated by target device.
**/
-static int sd_prepare_discard(struct request *rq)
+static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
{
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
struct bio *bio = rq->bio;
sector_t sector = bio->bi_sector;
- unsigned int num = bio_sectors(bio);
+ unsigned int nr_sectors = bio_sectors(bio);
+ unsigned int len;
+ int ret;
+ struct page *page;
if (sdkp->device->sector_size == 4096) {
sector >>= 3;
- num >>= 3;
+ nr_sectors >>= 3;
}
- rq->cmd_type = REQ_TYPE_BLOCK_PC;
rq->timeout = SD_TIMEOUT;
memset(rq->cmd, 0, rq->cmd_len);
+ page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
+ if (!page)
+ return BLKPREP_DEFER;
+
if (sdkp->unmap) {
- char *buf = kmap_atomic(bio_page(bio), KM_USER0);
+ char *buf = page_address(page);
+ rq->cmd_len = 10;
rq->cmd[0] = UNMAP;
rq->cmd[8] = 24;
- rq->cmd_len = 10;
-
- /* Ensure that data length matches payload */
- rq->__data_len = bio->bi_size = bio->bi_io_vec->bv_len = 24;
put_unaligned_be16(6 + 16, &buf[0]);
put_unaligned_be16(16, &buf[2]);
put_unaligned_be64(sector, &buf[8]);
- put_unaligned_be32(num, &buf[16]);
+ put_unaligned_be32(nr_sectors, &buf[16]);
- kunmap_atomic(buf, KM_USER0);
+ len = 24;
} else {
+ rq->cmd_len = 16;
rq->cmd[0] = WRITE_SAME_16;
rq->cmd[1] = 0x8; /* UNMAP */
put_unaligned_be64(sector, &rq->cmd[2]);
- put_unaligned_be32(num, &rq->cmd[10]);
- rq->cmd_len = 16;
+ put_unaligned_be32(nr_sectors, &rq->cmd[10]);
+
+ len = sdkp->device->sector_size;
+ }
+
+ blk_add_request_payload(rq, page, len);
+ ret = scsi_setup_blk_pc_cmnd(sdp, rq);
+ rq->buffer = page_address(page);
+ if (ret != BLKPREP_OK) {
+ __free_page(page);
+ rq->buffer = NULL;
}
+ return ret;
+}
- return BLKPREP_OK;
+static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
+{
+ rq->timeout = SD_TIMEOUT;
+ rq->retries = SD_MAX_RETRIES;
+ rq->cmd[0] = SYNCHRONIZE_CACHE;
+ rq->cmd_len = 10;
+
+ return scsi_setup_blk_pc_cmnd(sdp, rq);
+}
+
+static void sd_unprep_fn(struct request_queue *q, struct request *rq)
+{
+ if (rq->cmd_flags & REQ_DISCARD) {
+ free_page((unsigned long)rq->buffer);
+ rq->buffer = NULL;
+ }
}
/**
* Discard request come in as REQ_TYPE_FS but we turn them into
* block PC requests to make life easier.
*/
- if (blk_discard_rq(rq))
- ret = sd_prepare_discard(rq);
-
- if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
+ if (rq->cmd_flags & REQ_DISCARD) {
+ ret = scsi_setup_discard_cmnd(sdp, rq);
+ goto out;
+ } else if (rq->cmd_flags & REQ_FLUSH) {
+ ret = scsi_setup_flush_cmnd(sdp, rq);
+ goto out;
+ } else if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
ret = scsi_setup_blk_pc_cmnd(sdp, rq);
goto out;
} else if (rq->cmd_type != REQ_TYPE_FS) {
SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
SCpnt->cmnd[7] = 0x18;
SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
- SCpnt->cmnd[10] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
+ SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
/* LBA */
SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
} else if (block > 0xffffffff) {
SCpnt->cmnd[0] += READ_16 - READ_6;
- SCpnt->cmnd[1] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
+ SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
this_count = 0xffff;
SCpnt->cmnd[0] += READ_10 - READ_6;
- SCpnt->cmnd[1] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
+ SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
} else {
- if (unlikely(blk_fua_rq(rq))) {
+ if (unlikely(rq->cmd_flags & REQ_FUA)) {
/*
* This happens only if this drive failed
* 10byte rw command with ILLEGAL_REQUEST
* or from within the kernel (e.g. as a result of a mount(1) ).
* In the latter case @inode and @filp carry an abridged amount
* of information as noted above.
+ *
+ * Locking: called with bdev->bd_mutex held.
**/
static int sd_open(struct block_device *bdev, fmode_t mode)
{
if (!scsi_device_online(sdev))
goto error_out;
- if (!sdkp->openers++ && sdev->removable) {
+ if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
if (scsi_block_when_processing_errors(sdev))
scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
}
*
* Note: may block (uninterruptible) if error recovery is underway
* on this disk.
+ *
+ * Locking: called with bdev->bd_mutex held.
**/
static int sd_release(struct gendisk *disk, fmode_t mode)
{
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
- if (!--sdkp->openers && sdev->removable) {
+ if (atomic_dec_return(&sdkp->openers) && sdev->removable) {
if (scsi_block_when_processing_errors(sdev))
scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
}
error = scsi_nonblockable_ioctl(sdp, cmd, p,
(mode & FMODE_NDELAY) != 0);
if (!scsi_block_when_processing_errors(sdp) || !error)
- return error;
+ goto out;
/*
* Send SCSI addressing ioctls directly to mid level, send other
switch (cmd) {
case SCSI_IOCTL_GET_IDLUN:
case SCSI_IOCTL_GET_BUS_NUMBER:
- return scsi_ioctl(sdp, cmd, p);
+ error = scsi_ioctl(sdp, cmd, p);
+ break;
default:
error = scsi_cmd_ioctl(disk->queue, disk, mode, cmd, p);
if (error != -ENOTTY)
- return error;
+ break;
+ error = scsi_ioctl(sdp, cmd, p);
+ break;
}
- return scsi_ioctl(sdp, cmd, p);
+out:
+ return error;
}
static void set_media_not_present(struct scsi_disk *sdkp)
return 0;
}
-static void sd_prepare_flush(struct request_queue *q, struct request *rq)
-{
- rq->cmd_type = REQ_TYPE_BLOCK_PC;
- rq->timeout = SD_TIMEOUT;
- rq->retries = SD_MAX_RETRIES;
- rq->cmd[0] = SYNCHRONIZE_CACHE;
- rq->cmd_len = 10;
-}
-
static void sd_rescan(struct device *dev)
{
struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
.owner = THIS_MODULE,
.open = sd_open,
.release = sd_release,
- .locked_ioctl = sd_ioctl,
+ .ioctl = sd_ioctl,
.getgeo = sd_getgeo,
#ifdef CONFIG_COMPAT
.compat_ioctl = sd_compat_ioctl,
u64 bad_lba;
int info_valid;
- if (!blk_fs_request(scmd->request))
+ if (scmd->request->cmd_type != REQ_TYPE_FS)
return 0;
info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
int sense_valid = 0;
int sense_deferred = 0;
+ if (SCpnt->request->cmd_flags & REQ_DISCARD) {
+ if (!result)
+ scsi_set_resid(SCpnt, 0);
+ return good_bytes;
+ }
+
if (result) {
sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
if (sense_valid)
/*
* Determine whether disk supports Data Integrity Field.
*/
-void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
+static void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
{
struct scsi_device *sdp = sdkp->device;
u8 type;
* The ATO bit indicates whether the DIF application tag is available
* for use by the operating system.
*/
-void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
+static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
{
int res, offset;
struct scsi_device *sdp = sdkp->device;
else
ordered = QUEUE_ORDERED_DRAIN;
- blk_queue_ordered(sdkp->disk->queue, ordered, sd_prepare_flush);
+ blk_queue_ordered(sdkp->disk->queue, ordered);
set_capacity(disk, sdkp->capacity);
kfree(buffer);
sd_revalidate_disk(gd);
blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);
+ blk_queue_unprep_rq(sdp->request_queue, sd_unprep_fn);
gd->driverfs_dev = &sdp->sdev_gendev;
gd->flags = GENHD_FL_EXT_DEVT;
struct scsi_device *sdp = to_scsi_device(dev);
struct scsi_disk *sdkp;
struct gendisk *gd;
- u32 index;
+ int index;
int error;
error = -ENODEV;
sdkp->driver = &sd_template;
sdkp->disk = gd;
sdkp->index = index;
- sdkp->openers = 0;
+ atomic_set(&sdkp->openers, 0);
sdkp->previous_state = 1;
if (!sdp->request_queue->rq_timeout) {
async_synchronize_full();
blk_queue_prep_rq(sdkp->device->request_queue, scsi_prep_fn);
+ blk_queue_unprep_rq(sdkp->device->request_queue, NULL);
device_del(&sdkp->dev);
del_gendisk(sdkp->disk);
sd_shutdown(dev);
struct scsi_device *device;
struct device dev;
struct gendisk *disk;
- unsigned int openers; /* protected by BKL for now, yuck */
+ atomic_t openers;
sector_t capacity; /* size in 512-byte sectors */
u32 index;
unsigned short hw_sector_size;
int len, size = sizeof(struct sg_iovec) * iov_count;
struct iovec *iov;
- iov = kmalloc(size, GFP_ATOMIC);
- if (!iov)
- return -ENOMEM;
-
- if (copy_from_user(iov, hp->dxferp, size)) {
- kfree(iov);
- return -EFAULT;
- }
+ iov = memdup_user(hp->dxferp, size);
+ if (IS_ERR(iov))
+ return PTR_ERR(iov);
len = iov_length(iov, iov_count);
if (hp->dxfer_len < len) {
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
+#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <asm/uaccess.h>
static int sr_block_open(struct block_device *bdev, fmode_t mode)
{
- struct scsi_cd *cd = scsi_cd_get(bdev->bd_disk);
+ struct scsi_cd *cd;
int ret = -ENXIO;
+ lock_kernel();
+ cd = scsi_cd_get(bdev->bd_disk);
if (cd) {
ret = cdrom_open(&cd->cdi, bdev, mode);
if (ret)
scsi_cd_put(cd);
}
+ unlock_kernel();
return ret;
}
static int sr_block_release(struct gendisk *disk, fmode_t mode)
{
struct scsi_cd *cd = scsi_cd(disk);
+ lock_kernel();
cdrom_release(&cd->cdi, mode);
scsi_cd_put(cd);
+ unlock_kernel();
return 0;
}
void __user *argp = (void __user *)arg;
int ret;
+ lock_kernel();
+
/*
* Send SCSI addressing ioctls directly to mid level, send other
* ioctls to cdrom/block level.
switch (cmd) {
case SCSI_IOCTL_GET_IDLUN:
case SCSI_IOCTL_GET_BUS_NUMBER:
- return scsi_ioctl(sdev, cmd, argp);
+ ret = scsi_ioctl(sdev, cmd, argp);
+ goto out;
}
ret = cdrom_ioctl(&cd->cdi, bdev, mode, cmd, arg);
if (ret != -ENOSYS)
- return ret;
+ goto out;
/*
* ENODEV means that we didn't recognise the ioctl, or that we
ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
(mode & FMODE_NDELAY) != 0);
if (ret != -ENODEV)
- return ret;
- return scsi_ioctl(sdev, cmd, argp);
+ goto out;
+ ret = scsi_ioctl(sdev, cmd, argp);
+
+out:
+ unlock_kernel();
+ return ret;
}
static int sr_block_media_changed(struct gendisk *disk)
.owner = THIS_MODULE,
.open = sr_block_open,
.release = sr_block_release,
- .locked_ioctl = sr_block_ioctl,
+ .ioctl = sr_block_ioctl,
.media_changed = sr_block_media_changed,
/*
* No compat_ioctl for now because sr_block_ioctl never
if((count > SUN3_DMA_MINSIZE) && (sun3_dma_setup_done
!= cmd))
{
- if(blk_fs_request(cmd->request)) {
+ if (cmd->request->cmd_type == REQ_TYPE_FS) {
sun3scsi_dma_setup(d, count,
rq_data_dir(cmd->request));
sun3_dma_setup_done = cmd;
struct scsi_cmnd *cmd,
int write_flag)
{
- if(blk_fs_request(cmd->request))
+ if (cmd->request->cmd_type == REQ_TYPE_FS)
return wanted;
else
return 0;
struct scsi_cmnd *cmd,
int write_flag)
{
- if(blk_fs_request(cmd->request))
+ if (cmd->request->cmd_type == REQ_TYPE_FS)
return wanted;
else
return 0;
};
static int __devinit esp_sbus_setup_dma(struct esp *esp,
- struct of_device *dma_of)
+ struct platform_device *dma_of)
{
esp->dma = dma_of;
static int __devinit esp_sbus_map_regs(struct esp *esp, int hme)
{
- struct of_device *op = esp->dev;
+ struct platform_device *op = esp->dev;
struct resource *res;
/* On HME, two reg sets exist, first is DVMA,
static int __devinit esp_sbus_map_command_block(struct esp *esp)
{
- struct of_device *op = esp->dev;
+ struct platform_device *op = esp->dev;
esp->command_block = dma_alloc_coherent(&op->dev, 16,
&esp->command_block_dma,
static int __devinit esp_sbus_register_irq(struct esp *esp)
{
struct Scsi_Host *host = esp->host;
- struct of_device *op = esp->dev;
+ struct platform_device *op = esp->dev;
host->irq = op->archdata.irqs[0];
return request_irq(host->irq, scsi_esp_intr, IRQF_SHARED, "ESP", esp);
}
-static void __devinit esp_get_scsi_id(struct esp *esp, struct of_device *espdma)
+static void __devinit esp_get_scsi_id(struct esp *esp, struct platform_device *espdma)
{
- struct of_device *op = esp->dev;
+ struct platform_device *op = esp->dev;
struct device_node *dp;
dp = op->dev.of_node;
static void __devinit esp_get_differential(struct esp *esp)
{
- struct of_device *op = esp->dev;
+ struct platform_device *op = esp->dev;
struct device_node *dp;
dp = op->dev.of_node;
static void __devinit esp_get_clock_params(struct esp *esp)
{
- struct of_device *op = esp->dev;
+ struct platform_device *op = esp->dev;
struct device_node *bus_dp, *dp;
int fmhz;
esp->cfreq = fmhz;
}
-static void __devinit esp_get_bursts(struct esp *esp, struct of_device *dma_of)
+static void __devinit esp_get_bursts(struct esp *esp, struct platform_device *dma_of)
{
struct device_node *dma_dp = dma_of->dev.of_node;
- struct of_device *op = esp->dev;
+ struct platform_device *op = esp->dev;
struct device_node *dp;
u8 bursts, val;
esp->bursts = bursts;
}
-static void __devinit esp_sbus_get_props(struct esp *esp, struct of_device *espdma)
+static void __devinit esp_sbus_get_props(struct esp *esp, struct platform_device *espdma)
{
esp_get_scsi_id(esp, espdma);
esp_get_differential(esp);
static dma_addr_t sbus_esp_map_single(struct esp *esp, void *buf,
size_t sz, int dir)
{
- struct of_device *op = esp->dev;
+ struct platform_device *op = esp->dev;
return dma_map_single(&op->dev, buf, sz, dir);
}
static int sbus_esp_map_sg(struct esp *esp, struct scatterlist *sg,
int num_sg, int dir)
{
- struct of_device *op = esp->dev;
+ struct platform_device *op = esp->dev;
return dma_map_sg(&op->dev, sg, num_sg, dir);
}
static void sbus_esp_unmap_single(struct esp *esp, dma_addr_t addr,
size_t sz, int dir)
{
- struct of_device *op = esp->dev;
+ struct platform_device *op = esp->dev;
dma_unmap_single(&op->dev, addr, sz, dir);
}
static void sbus_esp_unmap_sg(struct esp *esp, struct scatterlist *sg,
int num_sg, int dir)
{
- struct of_device *op = esp->dev;
+ struct platform_device *op = esp->dev;
dma_unmap_sg(&op->dev, sg, num_sg, dir);
}
{
int can_do_burst16, can_do_burst32, can_do_burst64;
int can_do_sbus64, lim;
- struct of_device *op;
+ struct platform_device *op;
u32 val;
can_do_burst16 = (esp->bursts & DMA_BURST16) != 0;
.dma_error = sbus_esp_dma_error,
};
-static int __devinit esp_sbus_probe_one(struct of_device *op,
- struct of_device *espdma,
+static int __devinit esp_sbus_probe_one(struct platform_device *op,
+ struct platform_device *espdma,
int hme)
{
struct scsi_host_template *tpnt = &scsi_esp_template;
return err;
}
-static int __devinit esp_sbus_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit esp_sbus_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *dma_node = NULL;
struct device_node *dp = op->dev.of_node;
- struct of_device *dma_of = NULL;
+ struct platform_device *dma_of = NULL;
int hme = 0;
if (dp->parent &&
return esp_sbus_probe_one(op, dma_of, hme);
}
-static int __devexit esp_sbus_remove(struct of_device *op)
+static int __devexit esp_sbus_remove(struct platform_device *op)
{
struct esp *esp = dev_get_drvdata(&op->dev);
- struct of_device *dma_of = esp->dma;
+ struct platform_device *dma_of = esp->dma;
unsigned int irq = esp->host->irq;
bool is_hme;
u32 val;
struct ktermios *old)
{
unsigned long flags;
- unsigned int baud, quot, h_lcr;
+ unsigned int baud, quot, h_lcr, b;
/*
* We don't support modem control lines.
*/
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
-
- if (port->state && port->state->port.tty) {
- struct tty_struct *tty = port->state->port.tty;
- unsigned int b = port->uartclk / (16 * quot);
- tty_encode_baud_rate(tty, b, b);
- }
+ b = port->uartclk / (16 * quot);
+ tty_termios_encode_baud_rate(termios, b, b);
switch (termios->c_cflag & CSIZE) {
case CS5:
#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
-#ifdef CONFIG_CONSOLE
-extern wait_queue_head_t keypress_wait;
-#endif
-
struct tty_driver *serial_driver;
/* number of characters left in xmit buffer before we ask for more */
* Setup for console. Argument comes from the boot command line.
*/
-#if defined(CONFIG_M68EZ328ADS) || defined(CONFIG_ALMA_ANS) || defined(CONFIG_DRAGONIXVZ)
-#define CONSOLE_BAUD_RATE 115200
-#define DEFAULT_CBAUD B115200
-#else
- /* (es) */
- /* note: this is messy, but it works, again, perhaps defined somewhere else?*/
- #ifdef CONFIG_M68VZ328
- #define CONSOLE_BAUD_RATE 19200
- #define DEFAULT_CBAUD B19200
- #endif
- /* (/es) */
+/* note: this is messy, but it works, again, perhaps defined somewhere else?*/
+#ifdef CONFIG_M68VZ328
+#define CONSOLE_BAUD_RATE 19200
+#define DEFAULT_CBAUD B19200
#endif
+
#ifndef CONSOLE_BAUD_RATE
#define CONSOLE_BAUD_RATE 9600
#define DEFAULT_CBAUD B9600
return;
#endif /* CONFIG_MAGIC_SYSRQ */
}
- /* It is a 'keyboard interrupt' ;-) */
-#ifdef CONFIG_CONSOLE
- wake_up(&keypress_wait);
-#endif
}
if(!tty)
retval = -ERESTARTSYS;
break;
}
+ tty_unlock();
schedule();
+ tty_lock();
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
printk("jiff=%lu...", jiffies);
#endif
- lock_kernel();
/* We go through the loop at least once because we can't tell
* exactly when the last character exits the shifter. There can
* be at least two characters waiting to be sent after the buffers
bdp--;
} while (bdp->status & BD_SC_READY);
current->state = TASK_RUNNING;
- unlock_kernel();
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
printk("block_til_ready blocking: ttys%d, count = %d\n",
info->line, state->count);
#endif
+ tty_unlock();
schedule();
+ tty_lock();
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
.fifo_size = 128,
.tx_loadsz = 128,
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
},
[PORT_16654] = {
.name = "ST16654",
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
.flags = UART_CAP_FIFO | UART_CAP_AFE,
},
+ [PORT_U6_16550A] = {
+ .name = "U6_16550A",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};
#if defined(CONFIG_MIPS_ALCHEMY)
DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
}
serial_outp(up, UART_IER, iersave);
+
+ /*
+ * We distinguish between 16550A and U6 16550A by counting
+ * how many bytes are in the FIFO.
+ */
+ if (up->port.type == PORT_16550A && size_fifo(up) == 64) {
+ up->port.type = PORT_U6_16550A;
+ up->capabilities |= UART_CAP_AFE;
+ }
}
/*
return quot;
}
-static void
-serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+void
+serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
unsigned char cval, fcr = 0;
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
}
+EXPORT_SYMBOL(serial8250_do_set_termios);
static void
-serial8250_set_ldisc(struct uart_port *port)
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
- int line = port->line;
-
- if (line >= port->state->port.tty->driver->num)
- return;
+ if (port->set_termios)
+ port->set_termios(port, termios, old);
+ else
+ serial8250_do_set_termios(port, termios, old);
+}
- if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+static void
+serial8250_set_ldisc(struct uart_port *port, int new)
+{
+ if (new == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
serial8250_enable_ms(port);
} else
port.type = p->type;
port.serial_in = p->serial_in;
port.serial_out = p->serial_out;
+ port.set_termios = p->set_termios;
port.dev = &dev->dev;
port.irqflags |= irqflag;
ret = serial8250_register_port(&port);
uart->port.serial_in = port->serial_in;
if (port->serial_out)
uart->port.serial_out = port->serial_out;
+ /* Possibly override set_termios call */
+ if (port->set_termios)
+ uart->port.set_termios = port->set_termios;
ret = uart_add_one_port(&serial8250_reg, &uart->port);
if (ret == 0)
* The user can specify the device directly, e.g.,
* earlycon=uart8250,io,0x3f8,9600n8
* earlycon=uart8250,mmio,0xff5e0000,115200n8
+ * earlycon=uart8250,mmio32,0xff5e0000,115200n8
* or
* console=uart8250,io,0x3f8,9600n8
* console=uart8250,mmio,0xff5e0000,115200n8
+ * console=uart8250,mmio32,0xff5e0000,115200n8
*/
#include <linux/tty.h>
static unsigned int __init serial_in(struct uart_port *port, int offset)
{
- if (port->iotype == UPIO_MEM)
+ switch (port->iotype) {
+ case UPIO_MEM:
return readb(port->membase + offset);
- else
+ case UPIO_MEM32:
+ return readl(port->membase + (offset << 2));
+ case UPIO_PORT:
return inb(port->iobase + offset);
+ default:
+ return 0;
+ }
}
static void __init serial_out(struct uart_port *port, int offset, int value)
{
- if (port->iotype == UPIO_MEM)
+ switch (port->iotype) {
+ case UPIO_MEM:
writeb(value, port->membase + offset);
- else
+ break;
+ case UPIO_MEM32:
+ writel(value, port->membase + (offset << 2));
+ break;
+ case UPIO_PORT:
outb(value, port->iobase + offset);
+ break;
+ }
}
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
char *options)
{
struct uart_port *port = &device->port;
- int mmio, length;
+ int mmio, mmio32, length;
if (!options)
return -ENODEV;
port->uartclk = BASE_BAUD * 16;
- if (!strncmp(options, "mmio,", 5)) {
- port->iotype = UPIO_MEM;
- port->mapbase = simple_strtoul(options + 5, &options, 0);
+
+ mmio = !strncmp(options, "mmio,", 5);
+ mmio32 = !strncmp(options, "mmio32,", 7);
+ if (mmio || mmio32) {
+ port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
+ port->mapbase = simple_strtoul(options + (mmio ? 5 : 7),
+ &options, 0);
+ if (mmio32)
+ port->regshift = 2;
#ifdef CONFIG_FIX_EARLYCON_MEM
set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
port->mapbase & PAGE_MASK);
if (!port->membase) {
printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
__func__,
- (unsigned long long)port->mapbase);
+ (unsigned long long) port->mapbase);
return -ENOMEM;
}
#endif
- mmio = 1;
} else if (!strncmp(options, "io,", 3)) {
port->iotype = UPIO_PORT;
port->iobase = simple_strtoul(options + 3, &options, 0);
device->baud);
}
- printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n",
- mmio ? "MMIO" : "I/O port",
- mmio ? (unsigned long long) port->mapbase
- : (unsigned long long) port->iobase,
- device->options);
+ if (mmio || mmio32)
+ printk(KERN_INFO
+ "Early serial console at MMIO%s 0x%llu (options '%s')\n",
+ mmio32 ? "32" : "",
+ (unsigned long long)port->mapbase,
+ device->options);
+ else
+ printk(KERN_INFO
+ "Early serial console at I/O port 0x%lu (options '%s')\n",
+ port->iobase,
+ device->options);
+
return 0;
}
#define PCI_DEVICE_ID_TITAN_800E 0xA014
#define PCI_DEVICE_ID_TITAN_200EI 0xA016
#define PCI_DEVICE_ID_TITAN_200EISI 0xA017
+#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
pbn_b2_4_921600,
pbn_b2_8_921600,
+ pbn_b2_8_1152000,
+
pbn_b2_bt_1_115200,
pbn_b2_bt_2_115200,
pbn_b2_bt_4_115200,
.uart_offset = 8,
},
+ [pbn_b2_8_1152000] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 1152000,
+ .uart_offset = 8,
+ },
+
[pbn_b2_bt_1_115200] = {
.flags = FL_BASE2|FL_BASE_BARS,
.num_ports = 1,
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
+ PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+ pbn_b2_8_1152000 },
/*
* Oxford Semiconductor Inc. Tornado PCI express device range.
config SERIAL_S5PV210
tristate "Samsung S5PV210 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
- select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+ depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310)
+ select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310)
default y
help
Serial port support for Samsung's S5P Family of SoC's
+
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
help
MAX3100 chip support
+config SERIAL_MAX3107
+ tristate "MAX3107 support"
+ depends on SPI
+ select SERIAL_CORE
+ help
+ MAX3107 chip support
+
+config SERIAL_MAX3107_AAVA
+ tristate "MAX3107 AAVA platform support"
+ depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB
+ select SERIAL_CORE
+ help
+ Support for the MAX3107 chip configuration found on the AAVA
+ platform. Includes the extra initialisation and GPIO support
+ neded for this device.
+
config SERIAL_DZ
bool "DECstation DZ serial driver"
depends on MACH_DECSTATION && 32BIT
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
+config SERIAL_MRST_MAX3110
+ tristate "SPI UART driver for Max3110"
+ depends on SPI_DW_PCI
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ help
+ This is the UART protocol driver for the MAX3110 device on
+ the Intel Moorestown platform. On other systems use the max3100
+ driver.
+
+config MRST_MAX3110_IRQ
+ boolean "Enable GPIO IRQ for Max3110 over Moorestown"
+ default n
+ depends on SERIAL_MRST_MAX3110 && GPIO_LANGWELL
+ help
+ This has to be enabled after Moorestown GPIO driver is loaded
+
+config SERIAL_MFD_HSU
+ tristate "Medfield High Speed UART support"
+ depends on PCI
+ select SERIAL_CORE
+
+config SERIAL_MFD_HSU_CONSOLE
+ boolean "Medfile HSU serial console support"
+ depends on SERIAL_MFD_HSU=y
+ select SERIAL_CORE_CONSOLE
+
config SERIAL_BFIN
tristate "Blackfin serial port support"
depends on BLACKFIN
obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
+obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
+obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
+obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
+obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
static void altera_uart_console_putc(struct uart_port *port, const char c)
{
while (!(readl(port->membase + ALTERA_UART_STATUS_REG) &
- ALTERA_UART_STATUS_TRDY_MSK))
+ ALTERA_UART_STATUS_TRDY_MSK))
cpu_relax();
writel(c, port->membase + ALTERA_UART_TXDATA_REG);
/* OF Platform Driver */
/* ======================================================================== */
-static int __devinit apbuart_probe(struct of_device *op,
+static int __devinit apbuart_probe(struct platform_device *op,
const struct of_device_id *match)
{
int i = -1;
if (rs485conf->flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
- UART_PUT_TTGR(port, rs485conf->delay_rts_before_send);
+ if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
+ UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
- UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+ if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ UART_PUT_TTGR(port,
+ atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
- UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+ if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ UART_PUT_TTGR(port,
+ atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_serial_set_ldisc(struct uart_port *port)
+static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
{
int line = port->line;
unsigned short val;
- if (line >= port->state->port.tty->driver->num)
- return;
-
- switch (port->state->port.tty->termios->c_line) {
+ switch (ld) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
static int probe_index;
-static int __devinit cpm_uart_probe(struct of_device *ofdev,
+static int __devinit cpm_uart_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
int index = probe_index++;
return uart_add_one_port(&cpm_reg, &pinfo->port);
}
-static int __devexit cpm_uart_remove(struct of_device *ofdev)
+static int __devexit cpm_uart_remove(struct platform_device *ofdev)
{
struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev);
return uart_remove_one_port(&cpm_reg, &pinfo->port);
* Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO
* R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k)
*/
- lock_kernel();
orig_jiffies = jiffies;
while (info->xmit.head != info->xmit.tail || /* More in send queue */
(*info->ostatusadr & 0x007f) || /* more in FIFO */
curr_time_usec - info->last_tx_active_usec;
}
set_current_state(TASK_RUNNING);
- unlock_kernel();
}
/*
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible(info->close_wait,
+ wait_event_interruptible_tty(info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
printk("block_til_ready blocking: ttyS%d, count = %d\n",
info->line, info->count);
#endif
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&info->open_wait, &wait);
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible(info->close_wait,
+ wait_event_interruptible_tty(info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
INIT_WORK(&info->work, do_softint);
if (info->enabled) {
- printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
- serial_driver->name, info->line, (unsigned int)info->ioport);
+ printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n",
+ serial_driver->name, info->line, info->ioport);
}
}
#ifdef CONFIG_ETRAX_FAST_TIMER
rational_best_approximation(16 * div * baud, sport->port.uartclk,
1 << 16, 1 << 16, &num, &denom);
- if (port->state && port->state->port.tty) {
- tdiv64 = sport->port.uartclk;
- tdiv64 *= num;
- do_div(tdiv64, denom * 16 * div);
- tty_encode_baud_rate(sport->port.state->port.tty,
+ tdiv64 = sport->port.uartclk;
+ tdiv64 *= num;
+ do_div(tdiv64, denom * 16 * div);
+ tty_termios_encode_baud_rate(termios,
(speed_t)tdiv64, (speed_t)tdiv64);
- }
num -= 1;
denom -= 1;
struct ktermios *new_termios, struct ktermios *old_termios)
{
struct ioc3_port *port = get_ioc3_port(the_port);
- unsigned int cflag;
+ unsigned int cflag, iflag;
int baud;
int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
struct uart_state *state = the_port->state;
cflag = new_termios->c_cflag;
+ iflag = new_termios->c_iflag;
switch (cflag & CSIZE) {
case CS5:
state->port.tty->low_latency = 1;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
- if (I_IGNBRK(state->port.tty)) {
+ if (iflag & IGNBRK) {
the_port->ignore_status_mask &= ~N_BREAK;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
}
if (!(cflag & CREAD)) {
{
struct ioc4_port *port = get_ioc4_port(the_port, 0);
int baud, bits;
- unsigned cflag;
+ unsigned cflag, iflag;
int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
struct uart_state *state = the_port->state;
cflag = new_termios->c_cflag;
+ iflag = new_termios->c_iflag;
switch (cflag & CSIZE) {
case CS5:
state->port.tty->low_latency = 1;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
- if (I_IGNBRK(state->port.tty)) {
+ if (iflag & IGNBRK) {
the_port->ignore_status_mask &= ~N_BREAK;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
}
if (!(cflag & CREAD)) {
int baud = 0;
unsigned cflag;
u32 param_new, param_mask, parity = 0;
- struct tty_struct *tty = s->port.state->port.tty;
dev_dbg(&s->spi->dev, "%s\n", __func__);
- if (!tty)
- return;
cflag = termios->c_cflag;
param_new = 0;
param_mask = 0;
- baud = tty_get_baud_rate(tty);
+ baud = tty_termios_baud_rate(termios);
param_new = s->conf & MAX3100_BAUD;
switch (baud) {
case 300:
default:
baud = s->baud;
}
- tty_encode_baud_rate(tty, baud, baud);
+ tty_termios_encode_baud_rate(termios, baud, baud);
s->baud = baud;
param_mask |= MAX3100_BAUD;
--- /dev/null
+/*
+ * max3107.c - spi uart protocol driver for Maxim 3107
+ * Based on max3100.c
+ * by Christian Pellegrin <chripell@evolware.org>
+ * and max3110.c
+ * by Feng Tang <feng.tang@intel.com>
+ *
+ * Copyright (C) Aavamobile 2009
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/spi/spi.h>
+#include <linux/freezer.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/sfi.h>
+#include <asm/mrst.h>
+#include "max3107.h"
+
+/* GPIO direction to input function */
+static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[1]; /* Buffer for SPI transfer */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO configuration register */
+ buf[0] = MAX3107_GPIOCFG_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Set GPIO to input */
+ buf[0] &= ~(0x0001 << offset);
+
+ /* Write new GPIO configuration register value */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+/* GPIO direction to output function */
+static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[2]; /* Buffer for SPI transfers */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO configuration and data registers */
+ buf[0] = MAX3107_GPIOCFG_REG;
+ buf[1] = MAX3107_GPIODATA_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
+ dev_err(&s->spi->dev, "SPI transfer gpio failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+ buf[1] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Set GPIO to output */
+ buf[0] |= (0x0001 << offset);
+ /* Set value */
+ if (value)
+ buf[1] |= (0x0001 << offset);
+ else
+ buf[1] &= ~(0x0001 << offset);
+
+ /* Write new GPIO configuration and data register values */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
+ buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer for GPIO conf data w failed\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+/* GPIO value query function */
+static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[1]; /* Buffer for SPI transfer */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO data register */
+ buf[0] = MAX3107_GPIODATA_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Return value */
+ return buf[0] & (0x0001 << offset);
+}
+
+/* GPIO value set function */
+static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[2]; /* Buffer for SPI transfers */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return;
+ }
+
+ /* Read current GPIO configuration registers*/
+ buf[0] = MAX3107_GPIODATA_REG;
+ buf[1] = MAX3107_GPIOCFG_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer for GPIO data and config read failed\n");
+ return;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+ buf[1] &= MAX3107_SPI_RX_DATA_MASK;
+
+ if (!(buf[1] & (0x0001 << offset))) {
+ /* Configured as input, can't set value */
+ dev_warn(&s->spi->dev,
+ "Trying to set value for input GPIO\n");
+ return;
+ }
+
+ /* Set value */
+ if (value)
+ buf[0] |= (0x0001 << offset);
+ else
+ buf[0] &= ~(0x0001 << offset);
+
+ /* Write new GPIO data register value */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n");
+}
+
+/* GPIO chip data */
+static struct gpio_chip max3107_gpio_chip = {
+ .owner = THIS_MODULE,
+ .direction_input = max3107_gpio_direction_in,
+ .direction_output = max3107_gpio_direction_out,
+ .get = max3107_gpio_get,
+ .set = max3107_gpio_set,
+ .can_sleep = 1,
+ .base = MAX3107_GPIO_BASE,
+ .ngpio = MAX3107_GPIO_COUNT,
+};
+
+/**
+ * max3107_aava_reset - reset on AAVA systems
+ * @spi: The SPI device we are probing
+ *
+ * Reset the device ready for probing.
+ */
+
+static int max3107_aava_reset(struct spi_device *spi)
+{
+ /* Reset the chip */
+ if (gpio_request(MAX3107_RESET_GPIO, "max3107")) {
+ pr_err("Requesting RESET GPIO failed\n");
+ return -EIO;
+ }
+ if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) {
+ pr_err("Setting RESET GPIO to 0 failed\n");
+ gpio_free(MAX3107_RESET_GPIO);
+ return -EIO;
+ }
+ msleep(MAX3107_RESET_DELAY);
+ if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) {
+ pr_err("Setting RESET GPIO to 1 failed\n");
+ gpio_free(MAX3107_RESET_GPIO);
+ return -EIO;
+ }
+ gpio_free(MAX3107_RESET_GPIO);
+ msleep(MAX3107_WAKEUP_DELAY);
+ return 0;
+}
+
+static int max3107_aava_configure(struct max3107_port *s)
+{
+ int retval;
+
+ /* Initialize GPIO chip data */
+ s->chip = max3107_gpio_chip;
+ s->chip.label = s->spi->modalias;
+ s->chip.dev = &s->spi->dev;
+
+ /* Add GPIO chip */
+ retval = gpiochip_add(&s->chip);
+ if (retval) {
+ dev_err(&s->spi->dev, "Adding GPIO chip failed\n");
+ return retval;
+ }
+
+ /* Temporary fix for EV2 boot problems, set modem reset to 0 */
+ max3107_gpio_direction_out(&s->chip, 3, 0);
+ return 0;
+}
+
+#if 0
+/* This will get enabled once we have the board stuff merged for this
+ specific case */
+
+static const struct baud_table brg13_ext[] = {
+ { 300, MAX3107_BRG13_B300 },
+ { 600, MAX3107_BRG13_B600 },
+ { 1200, MAX3107_BRG13_B1200 },
+ { 2400, MAX3107_BRG13_B2400 },
+ { 4800, MAX3107_BRG13_B4800 },
+ { 9600, MAX3107_BRG13_B9600 },
+ { 19200, MAX3107_BRG13_B19200 },
+ { 57600, MAX3107_BRG13_B57600 },
+ { 115200, MAX3107_BRG13_B115200 },
+ { 230400, MAX3107_BRG13_B230400 },
+ { 460800, MAX3107_BRG13_B460800 },
+ { 921600, MAX3107_BRG13_B921600 },
+ { 0, 0 }
+};
+
+static void max3107_aava_init(struct max3107_port *s)
+{
+ /*override for AAVA SC specific*/
+ if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) {
+ if (get_koski_build_id() <= KOSKI_EV2)
+ if (s->ext_clk) {
+ s->brg_cfg = MAX3107_BRG13_B9600;
+ s->baud_tbl = (struct baud_table *)brg13_ext;
+ }
+ }
+}
+#endif
+
+static int __devexit max3107_aava_remove(struct spi_device *spi)
+{
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ /* Remove GPIO chip */
+ if (gpiochip_remove(&s->chip))
+ dev_warn(&spi->dev, "Removing GPIO chip failed\n");
+
+ /* Then do the default remove */
+ return max3107_remove(spi);
+}
+
+/* Platform data */
+static struct max3107_plat aava_plat_data = {
+ .loopback = 0,
+ .ext_clk = 1,
+/* .init = max3107_aava_init, */
+ .configure = max3107_aava_configure,
+ .hw_suspend = max3107_hw_susp,
+ .polled_mode = 0,
+ .poll_time = 0,
+};
+
+
+static int __devinit max3107_probe_aava(struct spi_device *spi)
+{
+ int err = max3107_aava_reset(spi);
+ if (err < 0)
+ return err;
+ return max3107_probe(spi, &aava_plat_data);
+}
+
+/* Spi driver data */
+static struct spi_driver max3107_driver = {
+ .driver = {
+ .name = "aava-max3107",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = max3107_probe_aava,
+ .remove = __devexit_p(max3107_aava_remove),
+ .suspend = max3107_suspend,
+ .resume = max3107_resume,
+};
+
+/* Driver init function */
+static int __init max3107_init(void)
+{
+ return spi_register_driver(&max3107_driver);
+}
+
+/* Driver exit function */
+static void __exit max3107_exit(void)
+{
+ spi_unregister_driver(&max3107_driver);
+}
+
+module_init(max3107_init);
+module_exit(max3107_exit);
+
+MODULE_DESCRIPTION("MAX3107 driver");
+MODULE_AUTHOR("Aavamobile");
+MODULE_ALIAS("aava-max3107-spi");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * max3107.c - spi uart protocol driver for Maxim 3107
+ * Based on max3100.c
+ * by Christian Pellegrin <chripell@evolware.org>
+ * and max3110.c
+ * by Feng Tang <feng.tang@intel.com>
+ *
+ * Copyright (C) Aavamobile 2009
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/freezer.h>
+#include "max3107.h"
+
+static const struct baud_table brg26_ext[] = {
+ { 300, MAX3107_BRG26_B300 },
+ { 600, MAX3107_BRG26_B600 },
+ { 1200, MAX3107_BRG26_B1200 },
+ { 2400, MAX3107_BRG26_B2400 },
+ { 4800, MAX3107_BRG26_B4800 },
+ { 9600, MAX3107_BRG26_B9600 },
+ { 19200, MAX3107_BRG26_B19200 },
+ { 57600, MAX3107_BRG26_B57600 },
+ { 115200, MAX3107_BRG26_B115200 },
+ { 230400, MAX3107_BRG26_B230400 },
+ { 460800, MAX3107_BRG26_B460800 },
+ { 921600, MAX3107_BRG26_B921600 },
+ { 0, 0 }
+};
+
+static const struct baud_table brg13_int[] = {
+ { 300, MAX3107_BRG13_IB300 },
+ { 600, MAX3107_BRG13_IB600 },
+ { 1200, MAX3107_BRG13_IB1200 },
+ { 2400, MAX3107_BRG13_IB2400 },
+ { 4800, MAX3107_BRG13_IB4800 },
+ { 9600, MAX3107_BRG13_IB9600 },
+ { 19200, MAX3107_BRG13_IB19200 },
+ { 57600, MAX3107_BRG13_IB57600 },
+ { 115200, MAX3107_BRG13_IB115200 },
+ { 230400, MAX3107_BRG13_IB230400 },
+ { 460800, MAX3107_BRG13_IB460800 },
+ { 921600, MAX3107_BRG13_IB921600 },
+ { 0, 0 }
+};
+
+static u32 get_new_brg(int baud, struct max3107_port *s)
+{
+ int i;
+ const struct baud_table *baud_tbl = s->baud_tbl;
+
+ for (i = 0; i < 13; i++) {
+ if (baud == baud_tbl[i].baud)
+ return baud_tbl[i].new_brg;
+ }
+
+ return 0;
+}
+
+/* Perform SPI transfer for write/read of device register(s) */
+int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len)
+{
+ struct spi_message spi_msg;
+ struct spi_transfer spi_xfer;
+
+ /* Initialize SPI ,message */
+ spi_message_init(&spi_msg);
+
+ /* Initialize SPI transfer */
+ memset(&spi_xfer, 0, sizeof spi_xfer);
+ spi_xfer.len = len;
+ spi_xfer.tx_buf = tx;
+ spi_xfer.rx_buf = rx;
+ spi_xfer.speed_hz = MAX3107_SPI_SPEED;
+
+ /* Add SPI transfer to SPI message */
+ spi_message_add_tail(&spi_xfer, &spi_msg);
+
+#ifdef DBG_TRACE_SPI_DATA
+ {
+ int i;
+ pr_info("tx len %d:\n", spi_xfer.len);
+ for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
+ pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]);
+ pr_info("\n");
+ }
+#endif
+
+ /* Perform synchronous SPI transfer */
+ if (spi_sync(s->spi, &spi_msg)) {
+ dev_err(&s->spi->dev, "spi_sync failure\n");
+ return -EIO;
+ }
+
+#ifdef DBG_TRACE_SPI_DATA
+ if (spi_xfer.rx_buf) {
+ int i;
+ pr_info("rx len %d:\n", spi_xfer.len);
+ for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
+ pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]);
+ pr_info("\n");
+ }
+#endif
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max3107_rw);
+
+/* Puts received data to circular buffer */
+static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data,
+ int len)
+{
+ struct uart_port *port = &s->port;
+ struct tty_struct *tty;
+
+ if (!port->state)
+ return;
+
+ tty = port->state->port.tty;
+ if (!tty)
+ return;
+
+ /* Insert received data */
+ tty_insert_flip_string(tty, data, len);
+ /* Update RX counter */
+ port->icount.rx += len;
+}
+
+/* Handle data receiving */
+static void max3107_handlerx(struct max3107_port *s, u16 rxlvl)
+{
+ int i;
+ int j;
+ int len; /* SPI transfer buffer length */
+ u16 *buf;
+ u8 *valid_str;
+
+ if (!s->rx_enabled)
+ /* RX is disabled */
+ return;
+
+ if (rxlvl == 0) {
+ /* RX fifo is empty */
+ return;
+ } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) {
+ dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl);
+ /* Ensure sanity of RX level */
+ rxlvl = MAX3107_RX_FIFO_SIZE;
+ }
+ if ((s->rxbuf == 0) || (s->rxstr == 0)) {
+ dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n");
+ return;
+ }
+ buf = s->rxbuf;
+ valid_str = s->rxstr;
+ while (rxlvl) {
+ pr_debug("rxlvl %d\n", rxlvl);
+ /* Clear buffer */
+ memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2));
+ len = 0;
+ if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) {
+ /* First disable RX FIFO interrupt */
+ pr_debug("Disabling RX INT\n");
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT;
+ buf[0] |= s->irqen_reg;
+ len++;
+ }
+ /* Just increase the length by amount of words in FIFO since
+ * buffer was zeroed and SPI transfer of 0x0000 means reading
+ * from RX FIFO
+ */
+ len += rxlvl;
+ /* Append RX level query */
+ buf[len] = MAX3107_RXFIFOLVL_REG;
+ len++;
+
+ /* Perform the SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) {
+ dev_err(&s->spi->dev, "SPI transfer for RX h failed\n");
+ return;
+ }
+
+ /* Skip RX FIFO interrupt disabling word if it was added */
+ j = ((len - 1) - rxlvl);
+ /* Read received words */
+ for (i = 0; i < rxlvl; i++, j++)
+ valid_str[i] = (u8)buf[j];
+ put_data_to_circ_buf(s, valid_str, rxlvl);
+ /* Get new RX level */
+ rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK);
+ }
+
+ if (s->rx_enabled) {
+ /* RX still enabled, re-enable RX FIFO interrupt */
+ pr_debug("Enabling RX INT\n");
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
+ buf[0] |= s->irqen_reg;
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n");
+ }
+
+ /* Push the received data to receivers */
+ if (s->port.state->port.tty)
+ tty_flip_buffer_push(s->port.state->port.tty);
+}
+
+
+/* Handle data sending */
+static void max3107_handletx(struct max3107_port *s)
+{
+ struct circ_buf *xmit = &s->port.state->xmit;
+ int i;
+ unsigned long flags;
+ int len; /* SPI transfer buffer length */
+ u16 *buf;
+
+ if (!s->tx_fifo_empty)
+ /* Don't send more data before previous data is sent */
+ return;
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port))
+ /* No data to send or TX is stopped */
+ return;
+
+ if (!s->txbuf) {
+ dev_warn(&s->spi->dev, "Txbuf isn't ready\n");
+ return;
+ }
+ buf = s->txbuf;
+ /* Get length of data pending in circular buffer */
+ len = uart_circ_chars_pending(xmit);
+ if (len) {
+ /* Limit to size of TX FIFO */
+ if (len > MAX3107_TX_FIFO_SIZE)
+ len = MAX3107_TX_FIFO_SIZE;
+
+ pr_debug("txlen %d\n", len);
+
+ /* Update TX counter */
+ s->port.icount.tx += len;
+
+ /* TX FIFO will no longer be empty */
+ s->tx_fifo_empty = 0;
+
+ i = 0;
+ if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) {
+ /* First disable TX empty interrupt */
+ pr_debug("Disabling TE INT\n");
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT;
+ buf[i] |= s->irqen_reg;
+ i++;
+ len++;
+ }
+ /* Add data to send */
+ spin_lock_irqsave(&s->port.lock, flags);
+ for ( ; i < len ; i++) {
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG);
+ buf[i] |= ((u16)xmit->buf[xmit->tail] &
+ MAX3107_SPI_TX_DATA_MASK);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ }
+ spin_unlock_irqrestore(&s->port.lock, flags);
+ if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) {
+ /* Enable TX empty interrupt */
+ pr_debug("Enabling TE INT\n");
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT;
+ buf[i] |= s->irqen_reg;
+ i++;
+ len++;
+ }
+ if (!s->tx_enabled) {
+ /* Enable TX */
+ pr_debug("Enable TX\n");
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ spin_lock_irqsave(&s->data_lock, flags);
+ s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT;
+ buf[i] |= s->mode1_reg;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ s->tx_enabled = 1;
+ i++;
+ len++;
+ }
+
+ /* Perform the SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, len*2)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer TX handling failed\n");
+ return;
+ }
+ }
+
+ /* Indicate wake up if circular buffer is getting low on data */
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&s->port);
+
+}
+
+/* Handle interrupts
+ * Also reads and returns current RX FIFO level
+ */
+static u16 handle_interrupt(struct max3107_port *s)
+{
+ u16 buf[4]; /* Buffer for SPI transfers */
+ u8 irq_status;
+ u16 rx_level;
+ unsigned long flags;
+
+ /* Read IRQ status register */
+ buf[0] = MAX3107_IRQSTS_REG;
+ /* Read status IRQ status register */
+ buf[1] = MAX3107_STS_IRQSTS_REG;
+ /* Read LSR IRQ status register */
+ buf[2] = MAX3107_LSR_IRQSTS_REG;
+ /* Query RX level */
+ buf[3] = MAX3107_RXFIFOLVL_REG;
+
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer for INTR handling failed\n");
+ return 0;
+ }
+
+ irq_status = (u8)buf[0];
+ pr_debug("IRQSTS %x\n", irq_status);
+ rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK);
+
+ if (irq_status & MAX3107_IRQ_LSR_BIT) {
+ /* LSR interrupt */
+ if (buf[2] & MAX3107_LSR_RXTO_BIT)
+ /* RX timeout interrupt,
+ * handled by normal RX handling
+ */
+ pr_debug("RX TO INT\n");
+ }
+
+ if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) {
+ /* Tx empty interrupt,
+ * disable TX and set tx_fifo_empty flag
+ */
+ pr_debug("TE INT, disabling TX\n");
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ spin_lock_irqsave(&s->data_lock, flags);
+ s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
+ buf[0] |= s->mode1_reg;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "SPI transfer TX dis failed\n");
+ s->tx_enabled = 0;
+ s->tx_fifo_empty = 1;
+ }
+
+ if (irq_status & MAX3107_IRQ_RXFIFO_BIT)
+ /* RX FIFO interrupt,
+ * handled by normal RX handling
+ */
+ pr_debug("RFIFO INT\n");
+
+ /* Return RX level */
+ return rx_level;
+}
+
+/* Trigger work thread*/
+static void max3107_dowork(struct max3107_port *s)
+{
+ if (!work_pending(&s->work) && !freezing(current) && !s->suspended)
+ queue_work(s->workqueue, &s->work);
+ else
+ dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n");
+}
+
+/* Work thread */
+static void max3107_work(struct work_struct *w)
+{
+ struct max3107_port *s = container_of(w, struct max3107_port, work);
+ u16 rxlvl = 0;
+ int len; /* SPI transfer buffer length */
+ u16 buf[5]; /* Buffer for SPI transfers */
+ unsigned long flags;
+
+ /* Start by reading current RX FIFO level */
+ buf[0] = MAX3107_RXFIFOLVL_REG;
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer RX lev failed\n");
+ rxlvl = 0;
+ } else {
+ rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK);
+ }
+
+ do {
+ pr_debug("rxlvl %d\n", rxlvl);
+
+ /* Handle RX */
+ max3107_handlerx(s, rxlvl);
+ rxlvl = 0;
+
+ if (s->handle_irq) {
+ /* Handle pending interrupts
+ * We also get new RX FIFO level since new data may
+ * have been received while pushing received data to
+ * receivers
+ */
+ s->handle_irq = 0;
+ rxlvl = handle_interrupt(s);
+ }
+
+ /* Handle TX */
+ max3107_handletx(s);
+
+ /* Handle configuration changes */
+ len = 0;
+ spin_lock_irqsave(&s->data_lock, flags);
+ if (s->mode1_commit) {
+ pr_debug("mode1_commit\n");
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ buf[len++] |= s->mode1_reg;
+ s->mode1_commit = 0;
+ }
+ if (s->lcr_commit) {
+ pr_debug("lcr_commit\n");
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG);
+ buf[len++] |= s->lcr_reg;
+ s->lcr_commit = 0;
+ }
+ if (s->brg_commit) {
+ pr_debug("brg_commit\n");
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG);
+ buf[len++] |= ((s->brg_cfg >> 16) &
+ MAX3107_SPI_TX_DATA_MASK);
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG);
+ buf[len++] |= ((s->brg_cfg >> 8) &
+ MAX3107_SPI_TX_DATA_MASK);
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG);
+ buf[len++] |= ((s->brg_cfg) & 0xff);
+ s->brg_commit = 0;
+ }
+ spin_unlock_irqrestore(&s->data_lock, flags);
+
+ if (len > 0) {
+ if (max3107_rw(s, (u8 *)buf, NULL, len * 2))
+ dev_err(&s->spi->dev,
+ "SPI transfer config failed\n");
+ }
+
+ /* Reloop if interrupt handling indicated data in RX FIFO */
+ } while (rxlvl);
+
+}
+
+/* Set sleep mode */
+static void max3107_set_sleep(struct max3107_port *s, int mode)
+{
+ u16 buf[1]; /* Buffer for SPI transfer */
+ unsigned long flags;
+ pr_debug("enter, mode %d\n", mode);
+
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ spin_lock_irqsave(&s->data_lock, flags);
+ switch (mode) {
+ case MAX3107_DISABLE_FORCED_SLEEP:
+ s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT;
+ break;
+ case MAX3107_ENABLE_FORCED_SLEEP:
+ s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT;
+ break;
+ case MAX3107_DISABLE_AUTOSLEEP:
+ s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT;
+ break;
+ case MAX3107_ENABLE_AUTOSLEEP:
+ s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT;
+ break;
+ default:
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ dev_warn(&s->spi->dev, "invalid sleep mode\n");
+ return;
+ }
+ buf[0] |= s->mode1_reg;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n");
+
+ if (mode == MAX3107_DISABLE_AUTOSLEEP ||
+ mode == MAX3107_DISABLE_FORCED_SLEEP)
+ msleep(MAX3107_WAKEUP_DELAY);
+}
+
+/* Perform full register initialization */
+static void max3107_register_init(struct max3107_port *s)
+{
+ u16 buf[11]; /* Buffer for SPI transfers */
+
+ /* 1. Configure baud rate, 9600 as default */
+ s->baud = 9600;
+ /* the below is default*/
+ if (s->ext_clk) {
+ s->brg_cfg = MAX3107_BRG26_B9600;
+ s->baud_tbl = (struct baud_table *)brg26_ext;
+ } else {
+ s->brg_cfg = MAX3107_BRG13_IB9600;
+ s->baud_tbl = (struct baud_table *)brg13_int;
+ }
+
+ if (s->pdata->init)
+ s->pdata->init(s);
+
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG)
+ | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK);
+ buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG)
+ | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK);
+ buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG)
+ | ((s->brg_cfg) & 0xff);
+
+ /* 2. Configure LCR register, 8N1 mode by default */
+ s->lcr_reg = MAX3107_LCR_WORD_LEN_8;
+ buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG)
+ | s->lcr_reg;
+
+ /* 3. Configure MODE 1 register */
+ s->mode1_reg = 0;
+ /* Enable IRQ pin */
+ s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT;
+ /* Disable TX */
+ s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
+ s->tx_enabled = 0;
+ /* RX is enabled */
+ s->rx_enabled = 1;
+ buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG)
+ | s->mode1_reg;
+
+ /* 4. Configure MODE 2 register */
+ buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
+ if (s->loopback) {
+ /* Enable loopback */
+ buf[5] |= MAX3107_MODE2_LOOPBACK_BIT;
+ }
+ /* Reset FIFOs */
+ buf[5] |= MAX3107_MODE2_FIFORST_BIT;
+ s->tx_fifo_empty = 1;
+
+ /* 5. Configure FIFO trigger level register */
+ buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG);
+ /* RX FIFO trigger for 16 words, TX FIFO trigger not used */
+ buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0));
+
+ /* 6. Configure flow control levels */
+ buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG);
+ /* Flow control halt level 96, resume level 48 */
+ buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96));
+
+ /* 7. Configure flow control */
+ buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG);
+ /* Enable auto CTS and auto RTS flow control */
+ buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT);
+
+ /* 8. Configure RX timeout register */
+ buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG);
+ /* Timeout after 48 character intervals */
+ buf[9] |= 0x0030;
+
+ /* 9. Configure LSR interrupt enable register */
+ buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG);
+ /* Enable RX timeout interrupt */
+ buf[10] |= MAX3107_LSR_RXTO_BIT;
+
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 22))
+ dev_err(&s->spi->dev, "SPI transfer for init failed\n");
+
+ /* 10. Clear IRQ status register by reading it */
+ buf[0] = MAX3107_IRQSTS_REG;
+
+ /* 11. Configure interrupt enable register */
+ /* Enable LSR interrupt */
+ s->irqen_reg = MAX3107_IRQ_LSR_BIT;
+ /* Enable RX FIFO interrupt */
+ s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
+ buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG)
+ | s->irqen_reg;
+
+ /* 12. Clear FIFO reset that was set in step 6 */
+ buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
+ if (s->loopback) {
+ /* Keep loopback enabled */
+ buf[2] |= MAX3107_MODE2_LOOPBACK_BIT;
+ }
+
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6))
+ dev_err(&s->spi->dev, "SPI transfer for init failed\n");
+
+}
+
+/* IRQ handler */
+static irqreturn_t max3107_irq(int irqno, void *dev_id)
+{
+ struct max3107_port *s = dev_id;
+
+ if (irqno != s->spi->irq) {
+ /* Unexpected IRQ */
+ return IRQ_NONE;
+ }
+
+ /* Indicate irq */
+ s->handle_irq = 1;
+
+ /* Trigger work thread */
+ max3107_dowork(s);
+
+ return IRQ_HANDLED;
+}
+
+/* HW suspension function
+ *
+ * Currently autosleep is used to decrease current consumption, alternative
+ * approach would be to set the chip to reset mode if UART is not being
+ * used but that would mess the GPIOs
+ *
+ */
+void max3107_hw_susp(struct max3107_port *s, int suspend)
+{
+ pr_debug("enter, suspend %d\n", suspend);
+
+ if (suspend) {
+ /* Suspend requested,
+ * enable autosleep to decrease current consumption
+ */
+ s->suspended = 1;
+ max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP);
+ } else {
+ /* Resume requested,
+ * disable autosleep
+ */
+ s->suspended = 0;
+ max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP);
+ }
+}
+EXPORT_SYMBOL_GPL(max3107_hw_susp);
+
+/* Modem status IRQ enabling */
+static void max3107_enable_ms(struct uart_port *port)
+{
+ /* Modem status not supported */
+}
+
+/* Data send function */
+static void max3107_start_tx(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ /* Trigger work thread for sending data */
+ max3107_dowork(s);
+}
+
+/* Function for checking that there is no pending transfers */
+static unsigned int max3107_tx_empty(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ pr_debug("returning %d\n",
+ (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit)));
+ return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit);
+}
+
+/* Function for stopping RX */
+static void max3107_stop_rx(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+ unsigned long flags;
+
+ /* Set RX disabled in MODE 1 register */
+ spin_lock_irqsave(&s->data_lock, flags);
+ s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT;
+ s->mode1_commit = 1;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ /* Set RX disabled */
+ s->rx_enabled = 0;
+ /* Trigger work thread for doing the actual configuration change */
+ max3107_dowork(s);
+}
+
+/* Function for returning control pin states */
+static unsigned int max3107_get_mctrl(struct uart_port *port)
+{
+ /* DCD and DSR are not wired and CTS/RTS is handled automatically
+ * so just indicate DSR and CAR asserted
+ */
+ return TIOCM_DSR | TIOCM_CAR;
+}
+
+/* Function for setting control pin states */
+static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* DCD and DSR are not wired and CTS/RTS is hadnled automatically
+ * so do nothing
+ */
+}
+
+/* Function for configuring UART parameters */
+static void max3107_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+ struct tty_struct *tty;
+ int baud;
+ u16 new_lcr = 0;
+ u32 new_brg = 0;
+ unsigned long flags;
+
+ if (!port->state)
+ return;
+
+ tty = port->state->port.tty;
+ if (!tty)
+ return;
+
+ /* Get new LCR register values */
+ /* Word size */
+ if ((termios->c_cflag & CSIZE) == CS7)
+ new_lcr |= MAX3107_LCR_WORD_LEN_7;
+ else
+ new_lcr |= MAX3107_LCR_WORD_LEN_8;
+
+ /* Parity */
+ if (termios->c_cflag & PARENB) {
+ new_lcr |= MAX3107_LCR_PARITY_BIT;
+ if (!(termios->c_cflag & PARODD))
+ new_lcr |= MAX3107_LCR_EVENPARITY_BIT;
+ }
+
+ /* Stop bits */
+ if (termios->c_cflag & CSTOPB) {
+ /* 2 stop bits */
+ new_lcr |= MAX3107_LCR_STOPLEN_BIT;
+ }
+
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+
+ /* Set status ignore mask */
+ s->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ s->port.ignore_status_mask |= MAX3107_ALL_ERRORS;
+
+ /* Set low latency to immediately handle pushed data */
+ s->port.state->port.tty->low_latency = 1;
+
+ /* Get new baud rate generator configuration */
+ baud = tty_get_baud_rate(tty);
+
+ spin_lock_irqsave(&s->data_lock, flags);
+ new_brg = get_new_brg(baud, s);
+ /* if can't find the corrent config, use previous */
+ if (!new_brg) {
+ baud = s->baud;
+ new_brg = s->brg_cfg;
+ }
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ s->baud = baud;
+
+ /* Update timeout according to new baud rate */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_lock_irqsave(&s->data_lock, flags);
+ if (s->lcr_reg != new_lcr) {
+ s->lcr_reg = new_lcr;
+ s->lcr_commit = 1;
+ }
+ if (s->brg_cfg != new_brg) {
+ s->brg_cfg = new_brg;
+ s->brg_commit = 1;
+ }
+ spin_unlock_irqrestore(&s->data_lock, flags);
+
+ /* Trigger work thread for doing the actual configuration change */
+ max3107_dowork(s);
+}
+
+/* Port shutdown function */
+static void max3107_shutdown(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ if (s->suspended && s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 0);
+
+ /* Free the interrupt */
+ free_irq(s->spi->irq, s);
+
+ if (s->workqueue) {
+ /* Flush and destroy work queue */
+ flush_workqueue(s->workqueue);
+ destroy_workqueue(s->workqueue);
+ s->workqueue = NULL;
+ }
+
+ /* Suspend HW */
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 1);
+}
+
+/* Port startup function */
+static int max3107_startup(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ /* Initialize work queue */
+ s->workqueue = create_freezeable_workqueue("max3107");
+ if (!s->workqueue) {
+ dev_err(&s->spi->dev, "Workqueue creation failed\n");
+ return -EBUSY;
+ }
+ INIT_WORK(&s->work, max3107_work);
+
+ /* Setup IRQ */
+ if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING,
+ "max3107", s)) {
+ dev_err(&s->spi->dev, "IRQ reguest failed\n");
+ destroy_workqueue(s->workqueue);
+ s->workqueue = NULL;
+ return -EBUSY;
+ }
+
+ /* Resume HW */
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 0);
+
+ /* Init registers */
+ max3107_register_init(s);
+
+ return 0;
+}
+
+/* Port type function */
+static const char *max3107_type(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+ return s->spi->modalias;
+}
+
+/* Port release function */
+static void max3107_release_port(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+/* Port request function */
+static int max3107_request_port(struct uart_port *port)
+{
+ /* Do nothing */
+ return 0;
+}
+
+/* Port config function */
+static void max3107_config_port(struct uart_port *port, int flags)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+ s->port.type = PORT_MAX3107;
+}
+
+/* Port verify function */
+static int max3107_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107)
+ return 0;
+
+ return -EINVAL;
+}
+
+/* Port stop TX function */
+static void max3107_stop_tx(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+/* Port break control function */
+static void max3107_break_ctl(struct uart_port *port, int break_state)
+{
+ /* We don't support break control, do nothing */
+}
+
+
+/* Port functions */
+static struct uart_ops max3107_ops = {
+ .tx_empty = max3107_tx_empty,
+ .set_mctrl = max3107_set_mctrl,
+ .get_mctrl = max3107_get_mctrl,
+ .stop_tx = max3107_stop_tx,
+ .start_tx = max3107_start_tx,
+ .stop_rx = max3107_stop_rx,
+ .enable_ms = max3107_enable_ms,
+ .break_ctl = max3107_break_ctl,
+ .startup = max3107_startup,
+ .shutdown = max3107_shutdown,
+ .set_termios = max3107_set_termios,
+ .type = max3107_type,
+ .release_port = max3107_release_port,
+ .request_port = max3107_request_port,
+ .config_port = max3107_config_port,
+ .verify_port = max3107_verify_port,
+};
+
+/* UART driver data */
+static struct uart_driver max3107_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyMAX",
+ .dev_name = "ttyMAX",
+ .nr = 1,
+};
+
+static int driver_registered = 0;
+
+
+
+/* 'Generic' platform data */
+static struct max3107_plat generic_plat_data = {
+ .loopback = 0,
+ .ext_clk = 1,
+ .hw_suspend = max3107_hw_susp,
+ .polled_mode = 0,
+ .poll_time = 0,
+};
+
+
+/*******************************************************************/
+
+/**
+ * max3107_probe - SPI bus probe entry point
+ * @spi: the spi device
+ *
+ * SPI wants us to probe this device and if appropriate claim it.
+ * Perform any platform specific requirements and then initialise
+ * the device.
+ */
+
+int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
+{
+ struct max3107_port *s;
+ u16 buf[2]; /* Buffer for SPI transfers */
+ int retval;
+
+ pr_info("enter max3107 probe\n");
+
+ /* Allocate port structure */
+ s = kzalloc(sizeof(*s), GFP_KERNEL);
+ if (!s) {
+ pr_err("Allocating port structure failed\n");
+ return -ENOMEM;
+ }
+
+ s->pdata = pdata;
+
+ /* SPI Rx buffer
+ * +2 for RX FIFO interrupt
+ * disabling and RX level query
+ */
+ s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL);
+ if (!s->rxbuf) {
+ pr_err("Allocating RX buffer failed\n");
+ return -ENOMEM;
+ }
+ s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL);
+ if (!s->rxstr) {
+ pr_err("Allocating RX buffer failed\n");
+ return -ENOMEM;
+ }
+ /* SPI Tx buffer
+ * SPI transfer buffer
+ * +3 for TX FIFO empty
+ * interrupt disabling and
+ * enabling and TX enabling
+ */
+ s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL);
+ if (!s->txbuf) {
+ pr_err("Allocating TX buffer failed\n");
+ return -ENOMEM;
+ }
+ /* Initialize shared data lock */
+ spin_lock_init(&s->data_lock);
+
+ /* SPI intializations */
+ dev_set_drvdata(&spi->dev, s);
+ spi->mode = SPI_MODE_0;
+ spi->dev.platform_data = pdata;
+ spi->bits_per_word = 16;
+ s->ext_clk = pdata->ext_clk;
+ s->loopback = pdata->loopback;
+ spi_setup(spi);
+ s->spi = spi;
+
+ /* Check REV ID to ensure we are talking to what we expect */
+ buf[0] = MAX3107_REVID_REG;
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n");
+ return -EIO;
+ }
+ if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 &&
+ (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) {
+ dev_err(&s->spi->dev, "REVID %x does not match\n",
+ (buf[0] & MAX3107_SPI_RX_DATA_MASK));
+ return -ENODEV;
+ }
+
+ /* Disable all interrupts */
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000);
+ buf[0] |= 0x0000;
+
+ /* Configure clock source */
+ buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG);
+ if (s->ext_clk) {
+ /* External clock */
+ buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT;
+ }
+
+ /* PLL bypass ON */
+ buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT;
+
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
+ dev_err(&s->spi->dev, "SPI transfer for init failed\n");
+ return -EIO;
+ }
+
+ /* Register UART driver */
+ if (!driver_registered) {
+ retval = uart_register_driver(&max3107_uart_driver);
+ if (retval) {
+ dev_err(&s->spi->dev, "Registering UART driver failed\n");
+ return retval;
+ }
+ driver_registered = 1;
+ }
+
+ /* Initialize UART port data */
+ s->port.fifosize = 128;
+ s->port.ops = &max3107_ops;
+ s->port.line = 0;
+ s->port.dev = &spi->dev;
+ s->port.uartclk = 9600;
+ s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ s->port.irq = s->spi->irq;
+ s->port.type = PORT_MAX3107;
+
+ /* Add UART port */
+ retval = uart_add_one_port(&max3107_uart_driver, &s->port);
+ if (retval < 0) {
+ dev_err(&s->spi->dev, "Adding UART port failed\n");
+ return retval;
+ }
+
+ if (pdata->configure) {
+ retval = pdata->configure(s);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Go to suspend mode */
+ if (pdata->hw_suspend)
+ pdata->hw_suspend(s, 1);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max3107_probe);
+
+/* Driver remove function */
+int max3107_remove(struct spi_device *spi)
+{
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ pr_info("enter max3107 remove\n");
+
+ /* Remove port */
+ if (uart_remove_one_port(&max3107_uart_driver, &s->port))
+ dev_warn(&s->spi->dev, "Removing UART port failed\n");
+
+
+ /* Free TxRx buffer */
+ kfree(s->rxbuf);
+ kfree(s->rxstr);
+ kfree(s->txbuf);
+
+ /* Free port structure */
+ kfree(s);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max3107_remove);
+
+/* Driver suspend function */
+int max3107_suspend(struct spi_device *spi, pm_message_t state)
+{
+#ifdef CONFIG_PM
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ pr_debug("enter suspend\n");
+
+ /* Suspend UART port */
+ uart_suspend_port(&max3107_uart_driver, &s->port);
+
+ /* Go to suspend mode */
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 1);
+#endif /* CONFIG_PM */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max3107_suspend);
+
+/* Driver resume function */
+int max3107_resume(struct spi_device *spi)
+{
+#ifdef CONFIG_PM
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ pr_debug("enter resume\n");
+
+ /* Resume from suspend */
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 0);
+
+ /* Resume UART port */
+ uart_resume_port(&max3107_uart_driver, &s->port);
+#endif /* CONFIG_PM */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max3107_resume);
+
+static int max3107_probe_generic(struct spi_device *spi)
+{
+ return max3107_probe(spi, &generic_plat_data);
+}
+
+/* Spi driver data */
+static struct spi_driver max3107_driver = {
+ .driver = {
+ .name = "max3107",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = max3107_probe_generic,
+ .remove = __devexit_p(max3107_remove),
+ .suspend = max3107_suspend,
+ .resume = max3107_resume,
+};
+
+/* Driver init function */
+static int __init max3107_init(void)
+{
+ pr_info("enter max3107 init\n");
+ return spi_register_driver(&max3107_driver);
+}
+
+/* Driver exit function */
+static void __exit max3107_exit(void)
+{
+ pr_info("enter max3107 exit\n");
+ /* Unregister UART driver */
+ if (driver_registered)
+ uart_unregister_driver(&max3107_uart_driver);
+ spi_unregister_driver(&max3107_driver);
+}
+
+module_init(max3107_init);
+module_exit(max3107_exit);
+
+MODULE_DESCRIPTION("MAX3107 driver");
+MODULE_AUTHOR("Aavamobile");
+MODULE_ALIAS("max3107-spi");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * max3107.h - spi uart protocol driver header for Maxim 3107
+ *
+ * Copyright (C) Aavamobile 2009
+ * Based on serial_max3100.h by Christian Pellegrin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _MAX3107_H
+#define _MAX3107_H
+
+/* Serial error status definitions */
+#define MAX3107_PARITY_ERROR 1
+#define MAX3107_FRAME_ERROR 2
+#define MAX3107_OVERRUN_ERROR 4
+#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \
+ MAX3107_FRAME_ERROR | \
+ MAX3107_OVERRUN_ERROR)
+
+/* GPIO definitions */
+#define MAX3107_GPIO_BASE 88
+#define MAX3107_GPIO_COUNT 4
+
+
+/* GPIO connected to chip's reset pin */
+#define MAX3107_RESET_GPIO 87
+
+
+/* Chip reset delay */
+#define MAX3107_RESET_DELAY 10
+
+/* Chip wakeup delay */
+#define MAX3107_WAKEUP_DELAY 50
+
+
+/* Sleep mode definitions */
+#define MAX3107_DISABLE_FORCED_SLEEP 0
+#define MAX3107_ENABLE_FORCED_SLEEP 1
+#define MAX3107_DISABLE_AUTOSLEEP 2
+#define MAX3107_ENABLE_AUTOSLEEP 3
+
+
+/* Definitions for register access with SPI transfers
+ *
+ * SPI transfer format:
+ *
+ * Master to slave bits xzzzzzzzyyyyyyyy
+ * Slave to master bits aaaaaaaabbbbbbbb
+ *
+ * where:
+ * x = 0 for reads, 1 for writes
+ * z = register address
+ * y = new register value if write, 0 if read
+ * a = unspecified
+ * b = register value if read, unspecified if write
+ */
+
+/* SPI speed */
+#define MAX3107_SPI_SPEED (3125000 * 2)
+
+/* Write bit */
+#define MAX3107_WRITE_BIT (1 << 15)
+
+/* SPI TX data mask */
+#define MAX3107_SPI_RX_DATA_MASK (0x00ff)
+
+/* SPI RX data mask */
+#define MAX3107_SPI_TX_DATA_MASK (0x00ff)
+
+/* Register access masks */
+#define MAX3107_RHR_REG (0x0000) /* RX FIFO */
+#define MAX3107_THR_REG (0x0000) /* TX FIFO */
+#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */
+#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */
+#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */
+#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */
+#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */
+#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */
+#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */
+#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */
+#define MAX3107_MODE1_REG (0x0900) /* MODE1 */
+#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */
+#define MAX3107_LCR_REG (0x0b00) /* LCR */
+#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */
+#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */
+#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */
+#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */
+#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */
+#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */
+#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */
+#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */
+#define MAX3107_XON1_REG (0x1400) /* XON1 character */
+#define MAX3107_XON2_REG (0x1500) /* XON2 character */
+#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */
+#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */
+#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */
+#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */
+#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */
+#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */
+#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */
+#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */
+#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */
+#define MAX3107_REVID_REG (0x1f00) /* Revision identification */
+
+/* IRQ register bits */
+#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */
+#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */
+#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */
+#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */
+#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */
+#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */
+#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */
+#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */
+
+/* LSR register bits */
+#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */
+#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */
+#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */
+#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */
+#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */
+#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */
+#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */
+
+/* Special character register bits */
+#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */
+#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */
+#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */
+#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */
+#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */
+#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */
+#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* Status register bits */
+#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */
+#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */
+#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */
+#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */
+#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */
+#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */
+#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */
+#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* MODE1 register bits */
+#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */
+#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */
+#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */
+#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */
+#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */
+#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */
+#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */
+#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */
+
+/* MODE2 register bits */
+#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */
+#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */
+#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */
+#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */
+#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */
+#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */
+#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */
+#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */
+
+/* LCR register bits */
+#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */
+#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1
+ *
+ * Word length bits table:
+ * 00 -> 5 bit words
+ * 01 -> 6 bit words
+ * 10 -> 7 bit words
+ * 11 -> 8 bit words
+ */
+#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit
+ *
+ * STOP length bit table:
+ * 0 -> 1 stop bit
+ * 1 -> 1-1.5 stop bits if
+ * word length is 5,
+ * 2 stop bits otherwise
+ */
+#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */
+#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */
+#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */
+#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */
+#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */
+#define MAX3107_LCR_WORD_LEN_5 (0x0000)
+#define MAX3107_LCR_WORD_LEN_6 (0x0001)
+#define MAX3107_LCR_WORD_LEN_7 (0x0002)
+#define MAX3107_LCR_WORD_LEN_8 (0x0003)
+
+
+/* IRDA register bits */
+#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */
+#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */
+#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */
+#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */
+#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */
+#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */
+#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* Flow control trigger level register masks */
+#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */
+#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */
+#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f)
+#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4)
+
+/* FIFO interrupt trigger level register masks */
+#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */
+#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */
+#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f)
+#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4)
+
+/* Flow control register bits */
+#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */
+#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */
+#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs
+ * are used in conjunction with
+ * XOFF2 for definition of
+ * special character */
+#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */
+#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */
+#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1
+ *
+ * SWFLOW bits 1 & 0 table:
+ * 00 -> no transmitter flow
+ * control
+ * 01 -> receiver compares
+ * XON2 and XOFF2
+ * and controls
+ * transmitter
+ * 10 -> receiver compares
+ * XON1 and XOFF1
+ * and controls
+ * transmitter
+ * 11 -> receiver compares
+ * XON1, XON2, XOFF1 and
+ * XOFF2 and controls
+ * transmitter
+ */
+#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */
+#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3
+ *
+ * SWFLOW bits 3 & 2 table:
+ * 00 -> no received flow
+ * control
+ * 01 -> transmitter generates
+ * XON2 and XOFF2
+ * 10 -> transmitter generates
+ * XON1 and XOFF1
+ * 11 -> transmitter generates
+ * XON1, XON2, XOFF1 and
+ * XOFF2
+ */
+
+/* GPIO configuration register bits */
+#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */
+#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */
+#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */
+#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */
+#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */
+#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */
+#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */
+#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */
+
+/* GPIO DATA register bits */
+#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */
+#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */
+#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */
+#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */
+#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */
+#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */
+#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */
+#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */
+
+/* PLL configuration register masks */
+#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */
+#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */
+
+/* Baud rate generator configuration register masks and bits */
+#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of
+ * Baud rate generator divisor
+ */
+#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */
+#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */
+#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* Clock source register bits */
+#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */
+#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */
+#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */
+#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */
+#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */
+#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */
+#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */
+
+
+/* HW definitions */
+#define MAX3107_RX_FIFO_SIZE 128
+#define MAX3107_TX_FIFO_SIZE 128
+#define MAX3107_REVID1 0x00a0
+#define MAX3107_REVID2 0x00a1
+
+
+/* Baud rate generator configuration values for external clock 13MHz */
+#define MAX3107_BRG13_B300 (0x0A9400 | 0x05)
+#define MAX3107_BRG13_B600 (0x054A00 | 0x03)
+#define MAX3107_BRG13_B1200 (0x02A500 | 0x01)
+#define MAX3107_BRG13_B2400 (0x015200 | 0x09)
+#define MAX3107_BRG13_B4800 (0x00A900 | 0x04)
+#define MAX3107_BRG13_B9600 (0x005400 | 0x0A)
+#define MAX3107_BRG13_B19200 (0x002A00 | 0x05)
+#define MAX3107_BRG13_B38400 (0x001500 | 0x03)
+#define MAX3107_BRG13_B57600 (0x000E00 | 0x02)
+#define MAX3107_BRG13_B115200 (0x000700 | 0x01)
+#define MAX3107_BRG13_B230400 (0x000300 | 0x08)
+#define MAX3107_BRG13_B460800 (0x000100 | 0x0c)
+#define MAX3107_BRG13_B921600 (0x000100 | 0x1c)
+
+/* Baud rate generator configuration values for external clock 26MHz */
+#define MAX3107_BRG26_B300 (0x152800 | 0x0A)
+#define MAX3107_BRG26_B600 (0x0A9400 | 0x05)
+#define MAX3107_BRG26_B1200 (0x054A00 | 0x03)
+#define MAX3107_BRG26_B2400 (0x02A500 | 0x01)
+#define MAX3107_BRG26_B4800 (0x015200 | 0x09)
+#define MAX3107_BRG26_B9600 (0x00A900 | 0x04)
+#define MAX3107_BRG26_B19200 (0x005400 | 0x0A)
+#define MAX3107_BRG26_B38400 (0x002A00 | 0x05)
+#define MAX3107_BRG26_B57600 (0x001C00 | 0x03)
+#define MAX3107_BRG26_B115200 (0x000E00 | 0x02)
+#define MAX3107_BRG26_B230400 (0x000700 | 0x01)
+#define MAX3107_BRG26_B460800 (0x000300 | 0x08)
+#define MAX3107_BRG26_B921600 (0x000100 | 0x0C)
+
+/* Baud rate generator configuration values for internal clock */
+#define MAX3107_BRG13_IB300 (0x008000 | 0x00)
+#define MAX3107_BRG13_IB600 (0x004000 | 0x00)
+#define MAX3107_BRG13_IB1200 (0x002000 | 0x00)
+#define MAX3107_BRG13_IB2400 (0x001000 | 0x00)
+#define MAX3107_BRG13_IB4800 (0x000800 | 0x00)
+#define MAX3107_BRG13_IB9600 (0x000400 | 0x00)
+#define MAX3107_BRG13_IB19200 (0x000200 | 0x00)
+#define MAX3107_BRG13_IB38400 (0x000100 | 0x00)
+#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B)
+#define MAX3107_BRG13_IB115200 (0x000000 | 0x05)
+#define MAX3107_BRG13_IB230400 (0x000000 | 0x03)
+#define MAX3107_BRG13_IB460800 (0x000000 | 0x00)
+#define MAX3107_BRG13_IB921600 (0x000000 | 0x00)
+
+
+struct baud_table {
+ int baud;
+ u32 new_brg;
+};
+
+struct max3107_port {
+ /* UART port structure */
+ struct uart_port port;
+
+ /* SPI device structure */
+ struct spi_device *spi;
+
+#if defined(CONFIG_GPIOLIB)
+ /* GPIO chip stucture */
+ struct gpio_chip chip;
+#endif
+
+ /* Workqueue that does all the magic */
+ struct workqueue_struct *workqueue;
+ struct work_struct work;
+
+ /* Lock for shared data */
+ spinlock_t data_lock;
+
+ /* Device configuration */
+ int ext_clk; /* 1 if external clock used */
+ int loopback; /* Current loopback mode state */
+ int baud; /* Current baud rate */
+
+ /* State flags */
+ int suspended; /* Indicates suspend mode */
+ int tx_fifo_empty; /* Flag for TX FIFO state */
+ int rx_enabled; /* Flag for receiver state */
+ int tx_enabled; /* Flag for transmitter state */
+
+ u16 irqen_reg; /* Current IRQ enable register value */
+ /* Shared data */
+ u16 mode1_reg; /* Current mode1 register value*/
+ int mode1_commit; /* Flag for setting new mode1 register value */
+ u16 lcr_reg; /* Current LCR register value */
+ int lcr_commit; /* Flag for setting new LCR register value */
+ u32 brg_cfg; /* Current Baud rate generator config */
+ int brg_commit; /* Flag for setting new baud rate generator
+ * config
+ */
+ struct baud_table *baud_tbl;
+ int handle_irq; /* Indicates that IRQ should be handled */
+
+ /* Rx buffer and str*/
+ u16 *rxbuf;
+ u8 *rxstr;
+ /* Tx buffer*/
+ u16 *txbuf;
+
+ struct max3107_plat *pdata; /* Platform data */
+};
+
+/* Platform data structure */
+struct max3107_plat {
+ /* Loopback mode enable */
+ int loopback;
+ /* External clock enable */
+ int ext_clk;
+ /* Called during the register initialisation */
+ void (*init)(struct max3107_port *s);
+ /* Called when the port is found and configured */
+ int (*configure)(struct max3107_port *s);
+ /* HW suspend function */
+ void (*hw_suspend) (struct max3107_port *s, int suspend);
+ /* Polling mode enable */
+ int polled_mode;
+ /* Polling period if polling mode enabled */
+ int poll_time;
+};
+
+extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len);
+extern void max3107_hw_susp(struct max3107_port *s, int suspend);
+extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata);
+extern int max3107_remove(struct spi_device *spi);
+extern int max3107_suspend(struct spi_device *spi, pm_message_t state);
+extern int max3107_resume(struct spi_device *spi);
+
+#endif /* _LINUX_SERIAL_MAX3107_H */
static unsigned int mcf_get_mctrl(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
unsigned int sigs;
- spin_lock_irqsave(&port->lock, flags);
sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ?
0 : TIOCM_CTS;
sigs |= (pp->sigs & TIOCM_RTS);
sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0);
sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0);
- spin_unlock_irqrestore(&port->lock, flags);
+
return sigs;
}
static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->sigs = sigs;
mcf_setppdtr(port->line, (sigs & TIOCM_DTR));
if (sigs & TIOCM_RTS)
writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1);
else
writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
static void mcf_start_tx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr |= MCFUART_UIR_TXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
static void mcf_stop_tx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr &= ~MCFUART_UIR_TXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
static void mcf_stop_rx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr &= ~MCFUART_UIR_RXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
struct uart_port *port = data;
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned int isr;
+ irqreturn_t ret = IRQ_NONE;
isr = readb(port->membase + MCFUART_UISR) & pp->imr;
- if (isr & MCFUART_UIR_RXREADY)
+
+ spin_lock(&port->lock);
+ if (isr & MCFUART_UIR_RXREADY) {
mcf_rx_chars(pp);
- if (isr & MCFUART_UIR_TXREADY)
+ ret = IRQ_HANDLED;
+ }
+ if (isr & MCFUART_UIR_TXREADY) {
mcf_tx_chars(pp);
- return IRQ_HANDLED;
+ ret = IRQ_HANDLED;
+ }
+ spin_unlock(&port->lock);
+
+ return ret;
}
/****************************************************************************/
--- /dev/null
+/*
+ * mfd.c: driver for High Speed UART device of Intel Medfield platform
+ *
+ * Refer pxa.c, 8250.c and some other drivers in drivers/serial/
+ *
+ * (C) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+/* Notes:
+ * 1. DMA channel allocation: 0/1 channel are assigned to port 0,
+ * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans
+ * are used for RX, odd chans for TX
+ *
+ * 2. In A0 stepping, UART will not support TX half empty flag
+ *
+ * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
+ * asserted, only when the HW is reset the DDCD and DDSR will
+ * be triggered
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial_reg.h>
+#include <linux/circ_buf.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial_mfd.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+
+#define MFD_HSU_A0_STEPPING 1
+
+#define HSU_DMA_BUF_SIZE 2048
+
+#define chan_readl(chan, offset) readl(chan->reg + offset)
+#define chan_writel(chan, offset, val) writel(val, chan->reg + offset)
+
+#define mfd_readl(obj, offset) readl(obj->reg + offset)
+#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset)
+
+#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10)
+
+struct hsu_dma_buffer {
+ u8 *buf;
+ dma_addr_t dma_addr;
+ u32 dma_size;
+ u32 ofs;
+};
+
+struct hsu_dma_chan {
+ u32 id;
+ enum dma_data_direction dirt;
+ struct uart_hsu_port *uport;
+ void __iomem *reg;
+ struct timer_list rx_timer; /* only needed by RX channel */
+};
+
+struct uart_hsu_port {
+ struct uart_port port;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned int lsr_break_flag;
+ char name[12];
+ int index;
+ struct device *dev;
+
+ struct hsu_dma_chan *txc;
+ struct hsu_dma_chan *rxc;
+ struct hsu_dma_buffer txbuf;
+ struct hsu_dma_buffer rxbuf;
+ int use_dma; /* flag for DMA/PIO */
+ int running;
+ int dma_tx_on;
+};
+
+/* Top level data structure of HSU */
+struct hsu_port {
+ void __iomem *reg;
+ unsigned long paddr;
+ unsigned long iolen;
+ u32 irq;
+
+ struct uart_hsu_port port[3];
+ struct hsu_dma_chan chans[10];
+
+ struct dentry *debugfs;
+};
+
+static inline unsigned int serial_in(struct uart_hsu_port *up, int offset)
+{
+ unsigned int val;
+
+ if (offset > UART_MSR) {
+ offset <<= 2;
+ val = readl(up->port.membase + offset);
+ } else
+ val = (unsigned int)readb(up->port.membase + offset);
+
+ return val;
+}
+
+static inline void serial_out(struct uart_hsu_port *up, int offset, int value)
+{
+ if (offset > UART_MSR) {
+ offset <<= 2;
+ writel(value, up->port.membase + offset);
+ } else {
+ unsigned char val = value & 0xff;
+ writeb(val, up->port.membase + offset);
+ }
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+#define HSU_REGS_BUFSIZE 1024
+
+static int hsu_show_regs_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t port_show_regs(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct uart_hsu_port *up = file->private_data;
+ char *buf;
+ u32 len = 0;
+ ssize_t ret;
+
+ buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL);
+ if (!buf)
+ return 0;
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MFD HSU port[%d] regs:\n", up->index);
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "=================================\n");
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "IER: \t\t0x%08x\n", serial_in(up, UART_IER));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "IIR: \t\t0x%08x\n", serial_in(up, UART_IIR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "LCR: \t\t0x%08x\n", serial_in(up, UART_LCR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MCR: \t\t0x%08x\n", serial_in(up, UART_MCR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "LSR: \t\t0x%08x\n", serial_in(up, UART_LSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MSR: \t\t0x%08x\n", serial_in(up, UART_MSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "FOR: \t\t0x%08x\n", serial_in(up, UART_FOR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "PS: \t\t0x%08x\n", serial_in(up, UART_PS));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MUL: \t\t0x%08x\n", serial_in(up, UART_MUL));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "DIV: \t\t0x%08x\n", serial_in(up, UART_DIV));
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t dma_show_regs(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct hsu_dma_chan *chan = file->private_data;
+ char *buf;
+ u32 len = 0;
+ ssize_t ret;
+
+ buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL);
+ if (!buf)
+ return 0;
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MFD HSU DMA channel [%d] regs:\n", chan->id);
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "=================================\n");
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR));
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations port_regs_ops = {
+ .owner = THIS_MODULE,
+ .open = hsu_show_regs_open,
+ .read = port_show_regs,
+};
+
+static const struct file_operations dma_regs_ops = {
+ .owner = THIS_MODULE,
+ .open = hsu_show_regs_open,
+ .read = dma_show_regs,
+};
+
+static int hsu_debugfs_init(struct hsu_port *hsu)
+{
+ int i;
+ char name[32];
+
+ hsu->debugfs = debugfs_create_dir("hsu", NULL);
+ if (!hsu->debugfs)
+ return -ENOMEM;
+
+ for (i = 0; i < 3; i++) {
+ snprintf(name, sizeof(name), "port_%d_regs", i);
+ debugfs_create_file(name, S_IFREG | S_IRUGO,
+ hsu->debugfs, (void *)(&hsu->port[i]), &port_regs_ops);
+ }
+
+ for (i = 0; i < 6; i++) {
+ snprintf(name, sizeof(name), "dma_chan_%d_regs", i);
+ debugfs_create_file(name, S_IFREG | S_IRUGO,
+ hsu->debugfs, (void *)&hsu->chans[i], &dma_regs_ops);
+ }
+
+ return 0;
+}
+
+static void hsu_debugfs_remove(struct hsu_port *hsu)
+{
+ if (hsu->debugfs)
+ debugfs_remove_recursive(hsu->debugfs);
+}
+
+#else
+static inline int hsu_debugfs_init(struct hsu_port *hsu)
+{
+ return 0;
+}
+
+static inline void hsu_debugfs_remove(struct hsu_port *hsu)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static void serial_hsu_enable_ms(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+void hsu_dma_tx(struct uart_hsu_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ struct hsu_dma_buffer *dbuf = &up->txbuf;
+ int count;
+
+ /* test_and_set_bit may be better, but anyway it's in lock protected mode */
+ if (up->dma_tx_on)
+ return;
+
+ /* Update the circ buf info */
+ xmit->tail += dbuf->ofs;
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ up->port.icount.tx += dbuf->ofs;
+ dbuf->ofs = 0;
+
+ /* Disable the channel */
+ chan_writel(up->txc, HSU_CH_CR, 0x0);
+
+ if (!uart_circ_empty(xmit) && !uart_tx_stopped(&up->port)) {
+ dma_sync_single_for_device(up->port.dev,
+ dbuf->dma_addr,
+ dbuf->dma_size,
+ DMA_TO_DEVICE);
+
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ dbuf->ofs = count;
+
+ /* Reprogram the channel */
+ chan_writel(up->txc, HSU_CH_D0SAR, dbuf->dma_addr + xmit->tail);
+ chan_writel(up->txc, HSU_CH_D0TSR, count);
+
+ /* Reenable the channel */
+ chan_writel(up->txc, HSU_CH_DCR, 0x1
+ | (0x1 << 8)
+ | (0x1 << 16)
+ | (0x1 << 24));
+ up->dma_tx_on = 1;
+ chan_writel(up->txc, HSU_CH_CR, 0x1);
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+}
+
+/* The buffer is already cache coherent */
+void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf)
+{
+ dbuf->ofs = 0;
+
+ chan_writel(rxc, HSU_CH_BSR, 32);
+ chan_writel(rxc, HSU_CH_MOTSR, 4);
+
+ chan_writel(rxc, HSU_CH_D0SAR, dbuf->dma_addr);
+ chan_writel(rxc, HSU_CH_D0TSR, dbuf->dma_size);
+ chan_writel(rxc, HSU_CH_DCR, 0x1 | (0x1 << 8)
+ | (0x1 << 16)
+ | (0x1 << 24) /* timeout bit, see HSU Errata 1 */
+ );
+ chan_writel(rxc, HSU_CH_CR, 0x3);
+
+ mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
+}
+
+/* Protected by spin_lock_irqsave(port->lock) */
+static void serial_hsu_start_tx(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+
+ if (up->use_dma) {
+ hsu_dma_tx(up);
+ } else if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void serial_hsu_stop_tx(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ struct hsu_dma_chan *txc = up->txc;
+
+ if (up->use_dma)
+ chan_writel(txc, HSU_CH_CR, 0x0);
+ else if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+/* This is always called in spinlock protected mode, so
+ * modify timeout timer is safe here */
+void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
+{
+ struct hsu_dma_buffer *dbuf = &up->rxbuf;
+ struct hsu_dma_chan *chan = up->rxc;
+ struct uart_port *port = &up->port;
+ struct tty_struct *tty = port->state->port.tty;
+ int count;
+
+ if (!tty)
+ return;
+
+ /*
+ * First need to know how many is already transferred,
+ * then check if its a timeout DMA irq, and return
+ * the trail bytes out, push them up and reenable the
+ * channel
+ */
+
+ /* Timeout IRQ, need wait some time, see Errata 2 */
+ if (int_sts & 0xf00)
+ udelay(2);
+
+ /* Stop the channel */
+ chan_writel(chan, HSU_CH_CR, 0x0);
+
+ count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
+ if (!count) {
+ /* Restart the channel before we leave */
+ chan_writel(chan, HSU_CH_CR, 0x3);
+ return;
+ }
+ del_timer(&chan->rx_timer);
+
+ dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
+ dbuf->dma_size, DMA_FROM_DEVICE);
+
+ /*
+ * Head will only wrap around when we recycle
+ * the DMA buffer, and when that happens, we
+ * explicitly set tail to 0. So head will
+ * always be greater than tail.
+ */
+ tty_insert_flip_string(tty, dbuf->buf, count);
+ port->icount.rx += count;
+
+ dma_sync_single_for_device(up->port.dev, dbuf->dma_addr,
+ dbuf->dma_size, DMA_FROM_DEVICE);
+
+ /* Reprogram the channel */
+ chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr);
+ chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size);
+ chan_writel(chan, HSU_CH_DCR, 0x1
+ | (0x1 << 8)
+ | (0x1 << 16)
+ | (0x1 << 24) /* timeout bit, see HSU Errata 1 */
+ );
+ tty_flip_buffer_push(tty);
+
+ chan_writel(chan, HSU_CH_CR, 0x3);
+ chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ;
+ add_timer(&chan->rx_timer);
+
+}
+
+static void serial_hsu_stop_rx(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ struct hsu_dma_chan *chan = up->rxc;
+
+ if (up->use_dma)
+ chan_writel(chan, HSU_CH_CR, 0x2);
+ else {
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static inline void receive_chars(struct uart_hsu_port *up, int *status)
+{
+ struct tty_struct *tty = up->port.state->port.tty;
+ unsigned int ch, flag;
+ unsigned int max_count = 256;
+
+ if (!tty)
+ return;
+
+ do {
+ ch = serial_in(up, UART_RX);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+
+ dev_warn(up->dev, "We really rush into ERR/BI case"
+ "status = 0x%02x", *status);
+ /* For statistics only */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (*status & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (*status & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (*status & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /* Mask off conditions which should be ignored. */
+ *status &= up->port.read_status_mask;
+
+#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE
+ if (up->port.cons &&
+ up->port.cons->index == up->port.line) {
+ /* Recover the break flag from console xmit */
+ *status |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+#endif
+ if (*status & UART_LSR_BI) {
+ flag = TTY_BREAK;
+ } else if (*status & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(&up->port, ch))
+ goto ignore_char;
+
+ uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
+ ignore_char:
+ *status = serial_in(up, UART_LSR);
+ } while ((*status & UART_LSR_DR) && max_count--);
+ tty_flip_buffer_push(tty);
+}
+
+static void transmit_chars(struct uart_hsu_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ serial_out(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ serial_hsu_stop_tx(&up->port);
+ return;
+ }
+
+#ifndef MFD_HSU_A0_STEPPING
+ count = up->port.fifosize / 2;
+#else
+ /*
+ * A0 only supports fully empty IRQ, and the first char written
+ * into it won't clear the EMPT bit, so we may need be cautious
+ * by useing a shorter buffer
+ */
+ count = up->port.fifosize - 4;
+#endif
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit))
+ serial_hsu_stop_tx(&up->port);
+}
+
+static inline void check_modem_status(struct uart_hsu_port *up)
+{
+ int status;
+
+ status = serial_in(up, UART_MSR);
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return;
+
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ /* We may only get DDCD when HW init and reset */
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+ /* Will start/stop_tx accordingly */
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static irqreturn_t port_irq(int irq, void *dev_id)
+{
+ struct uart_hsu_port *up = dev_id;
+ unsigned int iir, lsr;
+ unsigned long flags;
+
+ if (unlikely(!up->running))
+ return IRQ_NONE;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->use_dma) {
+ lsr = serial_in(up, UART_LSR);
+ if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE)))
+ dev_warn(up->dev,
+ "Got lsr irq while using DMA, lsr = 0x%2x\n",
+ lsr);
+ check_modem_status(up);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return IRQ_HANDLED;
+ }
+
+ iir = serial_in(up, UART_IIR);
+ if (iir & UART_IIR_NO_INT) {
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return IRQ_NONE;
+ }
+
+ lsr = serial_in(up, UART_LSR);
+ if (lsr & UART_LSR_DR)
+ receive_chars(up, &lsr);
+ check_modem_status(up);
+
+ /* lsr will be renewed during the receive_chars */
+ if (lsr & UART_LSR_THRE)
+ transmit_chars(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return IRQ_HANDLED;
+}
+
+static inline void dma_chan_irq(struct hsu_dma_chan *chan)
+{
+ struct uart_hsu_port *up = chan->uport;
+ unsigned long flags;
+ u32 int_sts;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ if (!up->use_dma || !up->running)
+ goto exit;
+
+ /*
+ * No matter what situation, need read clear the IRQ status
+ * There is a bug, see Errata 5, HSD 2900918
+ */
+ int_sts = chan_readl(chan, HSU_CH_SR);
+
+ /* Rx channel */
+ if (chan->dirt == DMA_FROM_DEVICE)
+ hsu_dma_rx(up, int_sts);
+
+ /* Tx channel */
+ if (chan->dirt == DMA_TO_DEVICE) {
+ chan_writel(chan, HSU_CH_CR, 0x0);
+ up->dma_tx_on = 0;
+ hsu_dma_tx(up);
+ }
+
+exit:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return;
+}
+
+static irqreturn_t dma_irq(int irq, void *dev_id)
+{
+ struct hsu_port *hsu = dev_id;
+ u32 int_sts, i;
+
+ int_sts = mfd_readl(hsu, HSU_GBL_DMAISR);
+
+ /* Currently we only have 6 channels may be used */
+ for (i = 0; i < 6; i++) {
+ if (int_sts & 0x1)
+ dma_chan_irq(&hsu->chans[i]);
+ int_sts >>= 1;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int serial_hsu_tx_empty(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int serial_hsu_get_mctrl(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned char status;
+ unsigned int ret;
+
+ status = serial_in(up, UART_MSR);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial_hsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr |= up->mcr;
+
+ serial_out(up, UART_MCR, mcr);
+}
+
+static void serial_hsu_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * What special to do:
+ * 1. chose the 64B fifo mode
+ * 2. make sure not to select half empty mode for A0 stepping
+ * 3. start dma or pio depends on configuration
+ * 4. we only allocate dma memory when needed
+ */
+static int serial_hsu_startup(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in set_termios())
+ */
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_FCR, 0);
+
+ /* Clear the interrupt registers. */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+
+ /* Now, initialize the UART, default is 8n1 */
+ serial_out(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->port.mctrl |= TIOCM_OUT2;
+ serial_hsu_set_mctrl(&up->port, up->port.mctrl);
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ */
+ if (!up->use_dma)
+ up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE;
+ else
+ up->ier = 0;
+ serial_out(up, UART_IER, up->ier);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /* DMA init */
+ if (up->use_dma) {
+ struct hsu_dma_buffer *dbuf;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ up->dma_tx_on = 0;
+
+ /* First allocate the RX buffer */
+ dbuf = &up->rxbuf;
+ dbuf->buf = kzalloc(HSU_DMA_BUF_SIZE, GFP_KERNEL);
+ if (!dbuf->buf) {
+ up->use_dma = 0;
+ goto exit;
+ }
+ dbuf->dma_addr = dma_map_single(port->dev,
+ dbuf->buf,
+ HSU_DMA_BUF_SIZE,
+ DMA_FROM_DEVICE);
+ dbuf->dma_size = HSU_DMA_BUF_SIZE;
+
+ /* Start the RX channel right now */
+ hsu_dma_start_rx_chan(up->rxc, dbuf);
+
+ /* Next init the TX DMA */
+ dbuf = &up->txbuf;
+ dbuf->buf = xmit->buf;
+ dbuf->dma_addr = dma_map_single(port->dev,
+ dbuf->buf,
+ UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ dbuf->dma_size = UART_XMIT_SIZE;
+
+ /* This should not be changed all around */
+ chan_writel(up->txc, HSU_CH_BSR, 32);
+ chan_writel(up->txc, HSU_CH_MOTSR, 4);
+ dbuf->ofs = 0;
+ }
+
+exit:
+ /* And clear the interrupt registers again for luck. */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+
+ up->running = 1;
+ return 0;
+}
+
+static void serial_hsu_shutdown(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+
+ del_timer_sync(&up->rxc->rx_timer);
+
+ /* Disable interrupts from this port */
+ up->ier = 0;
+ serial_out(up, UART_IER, 0);
+ up->running = 0;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.mctrl &= ~TIOCM_OUT2;
+ serial_hsu_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /* Disable break condition and FIFOs */
+ serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_FCR, 0);
+}
+
+static void
+serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ struct tty_struct *tty = port->state->port.tty;
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+ u32 mul = 0x3600;
+ u32 ps = 0x10;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ /* CMSPAR isn't supported by this driver */
+ if (tty)
+ tty->termios->c_cflag &= ~CMSPAR;
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+
+ /*
+ * For those basic low baud rate we can get the direct
+ * scalar from 2746800, like 115200 = 2746800/24, for those
+ * higher baud rate, we have to handle them case by case,
+ * but DIV reg is never touched as its default value 0x3d09
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
+ quot = uart_get_divisor(port, baud);
+
+ switch (baud) {
+ case 3500000:
+ mul = 0x3345;
+ ps = 0xC;
+ quot = 1;
+ break;
+ case 2500000:
+ mul = 0x2710;
+ ps = 0x10;
+ quot = 1;
+ break;
+ case 18432000:
+ mul = 0x2400;
+ ps = 0x10;
+ quot = 1;
+ break;
+ case 1500000:
+ mul = 0x1D4C;
+ ps = 0xc;
+ quot = 1;
+ break;
+ default:
+ ;
+ }
+
+ if ((up->port.uartclk / quot) < (2400 * 16))
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B;
+ else if ((up->port.uartclk / quot) < (230400 * 16))
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_16B;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B;
+
+ fcr |= UART_FCR_HSU_64B_FIFO;
+#ifdef MFD_HSU_A0_STEPPING
+ /* A0 doesn't support half empty IRQ */
+ fcr |= UART_FCR_FULL_EMPT_TXI;
+#endif
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /* Update the per-port timeout */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /* Characters to ignore */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /* Ignore all characters if CREAD is not set */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts, disable
+ * MSI by default
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ serial_out(up, UART_IER, up->ier);
+
+ if (termios->c_cflag & CRTSCTS)
+ up->mcr |= UART_MCR_AFE | UART_MCR_RTS;
+ else
+ up->mcr &= ~UART_MCR_AFE;
+
+ serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
+ serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
+ serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
+ serial_out(up, UART_LCR, cval); /* reset DLAB */
+ serial_out(up, UART_MUL, mul); /* set MUL */
+ serial_out(up, UART_PS, ps); /* set PS */
+ up->lcr = cval; /* Save LCR */
+ serial_hsu_set_mctrl(&up->port, up->port.mctrl);
+ serial_out(up, UART_FCR, fcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+serial_hsu_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+}
+
+static void serial_hsu_release_port(struct uart_port *port)
+{
+}
+
+static int serial_hsu_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void serial_hsu_config_port(struct uart_port *port, int flags)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ up->port.type = PORT_MFD;
+}
+
+static int
+serial_hsu_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ /* We don't want the core code to modify any port params */
+ return -EINVAL;
+}
+
+static const char *
+serial_hsu_type(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ return up->name;
+}
+
+/* Mainly for uart console use */
+static struct uart_hsu_port *serial_hsu_ports[3];
+static struct uart_driver serial_hsu_reg;
+
+#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/* Wait for transmitter & holding register to empty */
+static inline void wait_for_xmitr(struct uart_hsu_port *up)
+{
+ unsigned int status, tmout = 1000;
+
+ /* Wait up to 1ms for the character to be sent. */
+ do {
+ status = serial_in(up, UART_LSR);
+
+ if (status & UART_LSR_BI)
+ up->lsr_break_flag = UART_LSR_BI;
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while (!(status & BOTH_EMPTY));
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout &&
+ ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
+ udelay(1);
+ }
+}
+
+static void serial_hsu_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, ch);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void
+serial_hsu_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_hsu_port *up = serial_hsu_ports[co->index];
+ unsigned long flags;
+ unsigned int ier;
+ int locked = 1;
+
+ local_irq_save(flags);
+ if (up->port.sysrq)
+ locked = 0;
+ else if (oops_in_progress) {
+ locked = spin_trylock(&up->port.lock);
+ } else
+ spin_lock(&up->port.lock);
+
+ /* First save the IER then disable the interrupts */
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, 0);
+
+ uart_console_write(&up->port, s, count, serial_hsu_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ serial_out(up, UART_IER, ier);
+
+ if (locked)
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
+}
+
+static struct console serial_hsu_console;
+
+static int __init
+serial_hsu_console_setup(struct console *co, char *options)
+{
+ struct uart_hsu_port *up;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int ret;
+
+ if (co->index == -1 || co->index >= serial_hsu_reg.nr)
+ co->index = 0;
+ up = serial_hsu_ports[co->index];
+ if (!up)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ ret = uart_set_options(&up->port, co, baud, parity, bits, flow);
+
+ return ret;
+}
+
+static struct console serial_hsu_console = {
+ .name = "ttyMFD",
+ .write = serial_hsu_console_write,
+ .device = uart_console_device,
+ .setup = serial_hsu_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = 2,
+ .data = &serial_hsu_reg,
+};
+#endif
+
+struct uart_ops serial_hsu_pops = {
+ .tx_empty = serial_hsu_tx_empty,
+ .set_mctrl = serial_hsu_set_mctrl,
+ .get_mctrl = serial_hsu_get_mctrl,
+ .stop_tx = serial_hsu_stop_tx,
+ .start_tx = serial_hsu_start_tx,
+ .stop_rx = serial_hsu_stop_rx,
+ .enable_ms = serial_hsu_enable_ms,
+ .break_ctl = serial_hsu_break_ctl,
+ .startup = serial_hsu_startup,
+ .shutdown = serial_hsu_shutdown,
+ .set_termios = serial_hsu_set_termios,
+ .pm = serial_hsu_pm,
+ .type = serial_hsu_type,
+ .release_port = serial_hsu_release_port,
+ .request_port = serial_hsu_request_port,
+ .config_port = serial_hsu_config_port,
+ .verify_port = serial_hsu_verify_port,
+};
+
+static struct uart_driver serial_hsu_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "MFD serial",
+ .dev_name = "ttyMFD",
+ .major = TTY_MAJOR,
+ .minor = 128,
+ .nr = 3,
+};
+
+#ifdef CONFIG_PM
+static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ void *priv = pci_get_drvdata(pdev);
+ struct uart_hsu_port *up;
+
+ /* Make sure this is not the internal dma controller */
+ if (priv && (pdev->device != 0x081E)) {
+ up = priv;
+ uart_suspend_port(&serial_hsu_reg, &up->port);
+ }
+
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
+
+static int serial_hsu_resume(struct pci_dev *pdev)
+{
+ void *priv = pci_get_drvdata(pdev);
+ struct uart_hsu_port *up;
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ dev_warn(&pdev->dev,
+ "HSU: can't re-enable device, try to continue\n");
+
+ if (priv && (pdev->device != 0x081E)) {
+ up = priv;
+ uart_resume_port(&serial_hsu_reg, &up->port);
+ }
+ return 0;
+}
+#else
+#define serial_hsu_suspend NULL
+#define serial_hsu_resume NULL
+#endif
+
+/* temp global pointer before we settle down on using one or four PCI dev */
+static struct hsu_port *phsu;
+
+static int serial_hsu_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct uart_hsu_port *uport;
+ int index, ret;
+
+ printk(KERN_INFO "HSU: found PCI Serial controller(ID: %04x:%04x)\n",
+ pdev->vendor, pdev->device);
+
+ switch (pdev->device) {
+ case 0x081B:
+ index = 0;
+ break;
+ case 0x081C:
+ index = 1;
+ break;
+ case 0x081D:
+ index = 2;
+ break;
+ case 0x081E:
+ /* internal DMA controller */
+ index = 3;
+ break;
+ default:
+ dev_err(&pdev->dev, "HSU: out of index!");
+ return -ENODEV;
+ }
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ if (index == 3) {
+ /* DMA controller */
+ ret = request_irq(pdev->irq, dma_irq, 0, "hsu_dma", phsu);
+ if (ret) {
+ dev_err(&pdev->dev, "can not get IRQ\n");
+ goto err_disable;
+ }
+ pci_set_drvdata(pdev, phsu);
+ } else {
+ /* UART port 0~2 */
+ uport = &phsu->port[index];
+ uport->port.irq = pdev->irq;
+ uport->port.dev = &pdev->dev;
+ uport->dev = &pdev->dev;
+
+ ret = request_irq(pdev->irq, port_irq, 0, uport->name, uport);
+ if (ret) {
+ dev_err(&pdev->dev, "can not get IRQ\n");
+ goto err_disable;
+ }
+ uart_add_one_port(&serial_hsu_reg, &uport->port);
+
+#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE
+ if (index == 2) {
+ register_console(&serial_hsu_console);
+ uport->port.cons = &serial_hsu_console;
+ }
+#endif
+ pci_set_drvdata(pdev, uport);
+ }
+
+ return 0;
+
+err_disable:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void hsu_dma_rx_timeout(unsigned long data)
+{
+ struct hsu_dma_chan *chan = (void *)data;
+ struct uart_hsu_port *up = chan->uport;
+ struct hsu_dma_buffer *dbuf = &up->rxbuf;
+ int count = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
+
+ if (!count) {
+ mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
+ goto exit;
+ }
+
+ hsu_dma_rx(up, 0);
+exit:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void hsu_global_init(void)
+{
+ struct hsu_port *hsu;
+ struct uart_hsu_port *uport;
+ struct hsu_dma_chan *dchan;
+ int i, ret;
+
+ hsu = kzalloc(sizeof(struct hsu_port), GFP_KERNEL);
+ if (!hsu)
+ return;
+
+ /* Get basic io resource and map it */
+ hsu->paddr = 0xffa28000;
+ hsu->iolen = 0x1000;
+
+ if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global")))
+ pr_warning("HSU: error in request mem region\n");
+
+ hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen);
+ if (!hsu->reg) {
+ pr_err("HSU: error in ioremap\n");
+ ret = -ENOMEM;
+ goto err_free_region;
+ }
+
+ /* Initialise the 3 UART ports */
+ uport = hsu->port;
+ for (i = 0; i < 3; i++) {
+ uport->port.type = PORT_MFD;
+ uport->port.iotype = UPIO_MEM;
+ uport->port.mapbase = (resource_size_t)hsu->paddr
+ + HSU_PORT_REG_OFFSET
+ + i * HSU_PORT_REG_LENGTH;
+ uport->port.membase = hsu->reg + HSU_PORT_REG_OFFSET
+ + i * HSU_PORT_REG_LENGTH;
+
+ sprintf(uport->name, "hsu_port%d", i);
+ uport->port.fifosize = 64;
+ uport->port.ops = &serial_hsu_pops;
+ uport->port.line = i;
+ uport->port.flags = UPF_IOREMAP;
+ /* set the scalable maxim support rate to 2746800 bps */
+ uport->port.uartclk = 115200 * 24 * 16;
+
+ uport->running = 0;
+ uport->txc = &hsu->chans[i * 2];
+ uport->rxc = &hsu->chans[i * 2 + 1];
+
+ serial_hsu_ports[i] = uport;
+ uport->index = i;
+ uport++;
+ }
+
+ /* Initialise 6 dma channels */
+ dchan = hsu->chans;
+ for (i = 0; i < 6; i++) {
+ dchan->id = i;
+ dchan->dirt = (i & 0x1) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ dchan->uport = &hsu->port[i/2];
+ dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET +
+ i * HSU_DMA_CHANS_REG_LENGTH;
+
+ /* Work around for RX */
+ if (dchan->dirt == DMA_FROM_DEVICE) {
+ init_timer(&dchan->rx_timer);
+ dchan->rx_timer.function = hsu_dma_rx_timeout;
+ dchan->rx_timer.data = (unsigned long)dchan;
+ }
+ dchan++;
+ }
+
+ phsu = hsu;
+
+ hsu_debugfs_init(hsu);
+ return;
+
+err_free_region:
+ release_mem_region(hsu->paddr, hsu->iolen);
+ kfree(hsu);
+ return;
+}
+
+static void serial_hsu_remove(struct pci_dev *pdev)
+{
+ struct hsu_port *hsu;
+ int i;
+
+ hsu = pci_get_drvdata(pdev);
+ if (!hsu)
+ return;
+
+ for (i = 0; i < 3; i++)
+ uart_remove_one_port(&serial_hsu_reg, &hsu->port[i].port);
+
+ pci_set_drvdata(pdev, NULL);
+ free_irq(hsu->irq, hsu);
+ pci_disable_device(pdev);
+}
+
+/* First 3 are UART ports, and the 4th is the DMA */
+static const struct pci_device_id pci_ids[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081E) },
+ {},
+};
+
+static struct pci_driver hsu_pci_driver = {
+ .name = "HSU serial",
+ .id_table = pci_ids,
+ .probe = serial_hsu_probe,
+ .remove = __devexit_p(serial_hsu_remove),
+ .suspend = serial_hsu_suspend,
+ .resume = serial_hsu_resume,
+};
+
+static int __init hsu_pci_init(void)
+{
+ int ret;
+
+ hsu_global_init();
+
+ ret = uart_register_driver(&serial_hsu_reg);
+ if (ret)
+ return ret;
+
+ return pci_register_driver(&hsu_pci_driver);
+}
+
+static void __exit hsu_pci_exit(void)
+{
+ pci_unregister_driver(&hsu_pci_driver);
+ uart_unregister_driver(&serial_hsu_reg);
+
+ hsu_debugfs_remove(phsu);
+
+ kfree(phsu);
+}
+
+module_init(hsu_pci_init);
+module_exit(hsu_pci_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:medfield-hsu");
};
static int __devinit
-mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
+mpc52xx_uart_of_probe(struct platform_device *op, const struct of_device_id *match)
{
int idx = -1;
unsigned int uartclk;
}
static int
-mpc52xx_uart_of_remove(struct of_device *op)
+mpc52xx_uart_of_remove(struct platform_device *op)
{
struct uart_port *port = dev_get_drvdata(&op->dev);
dev_set_drvdata(&op->dev, NULL);
#ifdef CONFIG_PM
static int
-mpc52xx_uart_of_suspend(struct of_device *op, pm_message_t state)
+mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state)
{
struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
}
static int
-mpc52xx_uart_of_resume(struct of_device *op)
+mpc52xx_uart_of_resume(struct platform_device *op)
{
struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
--- /dev/null
+/*
+ * max3110.c - spi uart protocol driver for Maxim 3110 on Moorestown
+ *
+ * Copyright (C) Intel 2008 Feng Tang <feng.tang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/*
+ * Note:
+ * 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has
+ * 1 word. If SPI master controller doesn't support sclk frequency change,
+ * then the char need be sent out one by one with some delay
+ *
+ * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE
+ * interrupt for a low speed UART device
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+#include <linux/kthread.h>
+#include <linux/delay.h>
+#include <asm/atomic.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/dw_spi.h>
+
+#include "mrst_max3110.h"
+
+#define PR_FMT "mrst_max3110: "
+
+#define UART_TX_NEEDED 1
+#define CON_TX_NEEDED 2
+#define BIT_IRQ_PENDING 3
+
+struct uart_max3110 {
+ struct uart_port port;
+ struct spi_device *spi;
+ char *name;
+
+ wait_queue_head_t wq;
+ struct task_struct *main_thread;
+ struct task_struct *read_thread;
+ struct mutex thread_mutex;;
+
+ u32 baud;
+ u16 cur_conf;
+ u8 clock;
+ u8 parity, word_7bits;
+
+ unsigned long uart_flags;
+
+ /* console related */
+ struct circ_buf con_xmit;
+
+ /* irq related */
+ u16 irq;
+};
+
+/* global data structure, may need be removed */
+struct uart_max3110 *pmax;
+static inline void receive_char(struct uart_max3110 *max, u8 ch);
+static void receive_chars(struct uart_max3110 *max,
+ unsigned char *str, int len);
+static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf);
+static void max3110_console_receive(struct uart_max3110 *max);
+
+int max3110_write_then_read(struct uart_max3110 *max,
+ const u8 *txbuf, u8 *rxbuf, unsigned len, int always_fast)
+{
+ struct spi_device *spi = max->spi;
+ struct spi_message message;
+ struct spi_transfer x;
+ int ret;
+
+ if (!txbuf || !rxbuf)
+ return -EINVAL;
+
+ spi_message_init(&message);
+ memset(&x, 0, sizeof x);
+ x.len = len;
+ x.tx_buf = txbuf;
+ x.rx_buf = rxbuf;
+ spi_message_add_tail(&x, &message);
+
+ if (always_fast)
+ x.speed_hz = 3125000;
+ else if (max->baud)
+ x.speed_hz = max->baud;
+
+ /* Do the i/o */
+ ret = spi_sync(spi, &message);
+ return ret;
+}
+
+/* Write a u16 to the device, and return one u16 read back */
+int max3110_out(struct uart_max3110 *max, const u16 out)
+{
+ u16 tmp;
+ int ret;
+
+ ret = max3110_write_then_read(max, (u8 *)&out, (u8 *)&tmp, 2, 1);
+ if (ret)
+ return ret;
+
+ /* If some valid data is read back */
+ if (tmp & MAX3110_READ_DATA_AVAILABLE)
+ receive_char(max, (tmp & 0xff));
+
+ return ret;
+}
+
+#define MAX_READ_LEN 20
+/*
+ * This is usually used to read data from SPIC RX FIFO, which doesn't
+ * need any delay like flushing character out. It returns how many
+ * valide bytes are read back
+ */
+static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf)
+{
+ u16 out[MAX_READ_LEN], in[MAX_READ_LEN];
+ u8 *pbuf, valid_str[MAX_READ_LEN];
+ int i, j, bytelen;
+
+ if (len > MAX_READ_LEN) {
+ pr_err(PR_FMT "read len %d is too large\n", len);
+ return 0;
+ }
+
+ bytelen = len * 2;
+ memset(out, 0, bytelen);
+ memset(in, 0, bytelen);
+
+ if (max3110_write_then_read(max, (u8 *)out, (u8 *)in, bytelen, 1))
+ return 0;
+
+ /* If caller don't provide a buffer, then handle received char */
+ pbuf = buf ? buf : valid_str;
+
+ for (i = 0, j = 0; i < len; i++) {
+ if (in[i] & MAX3110_READ_DATA_AVAILABLE)
+ pbuf[j++] = (u8)(in[i] & 0xff);
+ }
+
+ if (j && (pbuf == valid_str))
+ receive_chars(max, valid_str, j);
+
+ return j;
+}
+
+static void serial_m3110_con_putchar(struct uart_port *port, int ch)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ struct circ_buf *xmit = &max->con_xmit;
+
+ if (uart_circ_chars_free(xmit)) {
+ xmit->buf[xmit->head] = (char)ch;
+ xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
+ }
+
+
+ if (!test_and_set_bit(CON_TX_NEEDED, &max->uart_flags))
+ wake_up_process(max->main_thread);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void serial_m3110_con_write(struct console *co,
+ const char *s, unsigned int count)
+{
+ if (!pmax)
+ return;
+
+ uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar);
+}
+
+static int __init
+serial_m3110_con_setup(struct console *co, char *options)
+{
+ struct uart_max3110 *max = pmax;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ pr_info(PR_FMT "setting up console\n");
+
+ if (!max) {
+ pr_err(PR_FMT "pmax is NULL, return");
+ return -ENODEV;
+ }
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&max->port, co, baud, parity, bits, flow);
+}
+
+static struct tty_driver *serial_m3110_con_device(struct console *co,
+ int *index)
+{
+ struct uart_driver *p = co->data;
+ *index = co->index;
+ return p->tty_driver;
+}
+
+static struct uart_driver serial_m3110_reg;
+static struct console serial_m3110_console = {
+ .name = "ttyS",
+ .write = serial_m3110_con_write,
+ .device = serial_m3110_con_device,
+ .setup = serial_m3110_con_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &serial_m3110_reg,
+};
+
+#define MRST_CONSOLE (&serial_m3110_console)
+
+static unsigned int serial_m3110_tx_empty(struct uart_port *port)
+{
+ return 1;
+}
+
+static void serial_m3110_stop_tx(struct uart_port *port)
+{
+ return;
+}
+
+/* stop_rx will be called in spin_lock env */
+static void serial_m3110_stop_rx(struct uart_port *port)
+{
+ return;
+}
+
+#define WORDS_PER_XFER 128
+static inline void send_circ_buf(struct uart_max3110 *max,
+ struct circ_buf *xmit)
+{
+ int len, left = 0;
+ u16 obuf[WORDS_PER_XFER], ibuf[WORDS_PER_XFER];
+ u8 valid_str[WORDS_PER_XFER];
+ int i, j;
+
+ while (!uart_circ_empty(xmit)) {
+ left = uart_circ_chars_pending(xmit);
+ while (left) {
+ len = (left >= WORDS_PER_XFER) ? WORDS_PER_XFER : left;
+
+ memset(obuf, 0, len * 2);
+ memset(ibuf, 0, len * 2);
+ for (i = 0; i < len; i++) {
+ obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
+ xmit->tail = (xmit->tail + 1) &
+ (UART_XMIT_SIZE - 1);
+ }
+ max3110_write_then_read(max, (u8 *)obuf,
+ (u8 *)ibuf, len * 2, 0);
+
+ for (i = 0, j = 0; i < len; i++) {
+ if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
+ valid_str[j++] = (u8)(ibuf[i] & 0xff);
+ }
+
+ if (j)
+ receive_chars(max, valid_str, j);
+
+ max->port.icount.tx += len;
+ left -= len;
+ }
+ }
+}
+
+static void transmit_char(struct uart_max3110 *max)
+{
+ struct uart_port *port = &max->port;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ return;
+
+ send_circ_buf(max, xmit);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ serial_m3110_stop_tx(port);
+}
+
+/* This will be called by uart_write() and tty_write, can't
+ * go to sleep */
+static void serial_m3110_start_tx(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+
+ if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags))
+ wake_up_process(max->main_thread);
+}
+
+static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
+{
+ struct uart_port *port = &max->port;
+ struct tty_struct *tty;
+ int usable;
+
+ /* If uart is not opened, just return */
+ if (!port->state)
+ return;
+
+ tty = port->state->port.tty;
+ if (!tty)
+ return; /* receive some char before the tty is opened */
+
+ while (len) {
+ usable = tty_buffer_request_room(tty, len);
+ if (usable) {
+ tty_insert_flip_string(tty, str, usable);
+ str += usable;
+ port->icount.rx += usable;
+ tty_flip_buffer_push(tty);
+ }
+ len -= usable;
+ }
+}
+
+static inline void receive_char(struct uart_max3110 *max, u8 ch)
+{
+ receive_chars(max, &ch, 1);
+}
+
+static void max3110_console_receive(struct uart_max3110 *max)
+{
+ int loop = 1, num, total = 0;
+ u8 recv_buf[512], *pbuf;
+
+ pbuf = recv_buf;
+ do {
+ num = max3110_read_multi(max, 8, pbuf);
+
+ if (num) {
+ loop = 10;
+ pbuf += num;
+ total += num;
+
+ if (total >= 500) {
+ receive_chars(max, recv_buf, total);
+ pbuf = recv_buf;
+ total = 0;
+ }
+ }
+ } while (--loop);
+
+ if (total)
+ receive_chars(max, recv_buf, total);
+}
+
+static int max3110_main_thread(void *_max)
+{
+ struct uart_max3110 *max = _max;
+ wait_queue_head_t *wq = &max->wq;
+ int ret = 0;
+ struct circ_buf *xmit = &max->con_xmit;
+
+ init_waitqueue_head(wq);
+ pr_info(PR_FMT "start main thread\n");
+
+ do {
+ wait_event_interruptible(*wq, max->uart_flags || kthread_should_stop());
+
+ mutex_lock(&max->thread_mutex);
+
+ if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags))
+ max3110_console_receive(max);
+
+ /* first handle console output */
+ if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags))
+ send_circ_buf(max, xmit);
+
+ /* handle uart output */
+ if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags))
+ transmit_char(max);
+
+ mutex_unlock(&max->thread_mutex);
+
+ } while (!kthread_should_stop());
+
+ return ret;
+}
+
+#ifdef CONFIG_MRST_MAX3110_IRQ
+static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
+{
+ struct uart_max3110 *max = dev_id;
+
+ /* max3110's irq is a falling edge, not level triggered,
+ * so no need to disable the irq */
+ if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags))
+ wake_up_process(max->main_thread);
+
+ return IRQ_HANDLED;
+}
+#else
+/* if don't use RX IRQ, then need a thread to polling read */
+static int max3110_read_thread(void *_max)
+{
+ struct uart_max3110 *max = _max;
+
+ pr_info(PR_FMT "start read thread\n");
+ do {
+ mutex_lock(&max->thread_mutex);
+ max3110_console_receive(max);
+ mutex_unlock(&max->thread_mutex);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ / 20);
+ } while (!kthread_should_stop());
+
+ return 0;
+}
+#endif
+
+static int serial_m3110_startup(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ u16 config = 0;
+ int ret = 0;
+
+ if (port->line != 0)
+ pr_err(PR_FMT "uart port startup failed\n");
+
+ /* firstly disable all IRQ and config it to 115200, 8n1 */
+ config = WC_TAG | WC_FIFO_ENABLE
+ | WC_1_STOPBITS
+ | WC_8BIT_WORD
+ | WC_BAUD_DR2;
+ ret = max3110_out(max, config);
+
+ /* as we use thread to handle tx/rx, need set low latency */
+ port->state->port.tty->low_latency = 1;
+
+#ifdef CONFIG_MRST_MAX3110_IRQ
+ ret = request_irq(max->irq, serial_m3110_irq,
+ IRQ_TYPE_EDGE_FALLING, "max3110", max);
+ if (ret)
+ return ret;
+
+ /* enable RX IRQ only */
+ config |= WC_RXA_IRQ_ENABLE;
+ max3110_out(max, config);
+#else
+ /* if IRQ is disabled, start a read thread for input data */
+ max->read_thread =
+ kthread_run(max3110_read_thread, max, "max3110_read");
+#endif
+
+ max->cur_conf = config;
+ return 0;
+}
+
+static void serial_m3110_shutdown(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ u16 config;
+
+ if (max->read_thread) {
+ kthread_stop(max->read_thread);
+ max->read_thread = NULL;
+ }
+
+#ifdef CONFIG_MRST_MAX3110_IRQ
+ free_irq(max->irq, max);
+#endif
+
+ /* Disable interrupts from this port */
+ config = WC_TAG | WC_SW_SHDI;
+ max3110_out(max, config);
+}
+
+static void serial_m3110_release_port(struct uart_port *port)
+{
+}
+
+static int serial_m3110_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void serial_m3110_config_port(struct uart_port *port, int flags)
+{
+ /* give it fake type */
+ port->type = PORT_PXA;
+}
+
+static int
+serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ /* we don't want the core code to modify any port params */
+ return -EINVAL;
+}
+
+
+static const char *serial_m3110_type(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ return max->name;
+}
+
+static void
+serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ unsigned char cval;
+ unsigned int baud, parity = 0;
+ int clk_div = -1;
+ u16 new_conf = max->cur_conf;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ new_conf |= WC_7BIT_WORD;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ new_conf |= WC_8BIT_WORD;
+ break;
+ }
+
+ baud = uart_get_baud_rate(port, termios, old, 0, 230400);
+
+ /* first calc the div for 1.8MHZ clock case */
+ switch (baud) {
+ case 300:
+ clk_div = WC_BAUD_DR384;
+ break;
+ case 600:
+ clk_div = WC_BAUD_DR192;
+ break;
+ case 1200:
+ clk_div = WC_BAUD_DR96;
+ break;
+ case 2400:
+ clk_div = WC_BAUD_DR48;
+ break;
+ case 4800:
+ clk_div = WC_BAUD_DR24;
+ break;
+ case 9600:
+ clk_div = WC_BAUD_DR12;
+ break;
+ case 19200:
+ clk_div = WC_BAUD_DR6;
+ break;
+ case 38400:
+ clk_div = WC_BAUD_DR3;
+ break;
+ case 57600:
+ clk_div = WC_BAUD_DR2;
+ break;
+ case 115200:
+ clk_div = WC_BAUD_DR1;
+ break;
+ case 230400:
+ if (max->clock & MAX3110_HIGH_CLK)
+ break;
+ default:
+ /* pick the previous baud rate */
+ baud = max->baud;
+ clk_div = max->cur_conf & WC_BAUD_DIV_MASK;
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ }
+
+ if (max->clock & MAX3110_HIGH_CLK) {
+ clk_div += 1;
+ /* high clk version max3110 doesn't support B300 */
+ if (baud == 300)
+ baud = 600;
+ if (baud == 230400)
+ clk_div = WC_BAUD_DR1;
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ }
+
+ new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div;
+ if (termios->c_cflag & CSTOPB)
+ new_conf |= WC_2_STOPBITS;
+ else
+ new_conf &= ~WC_2_STOPBITS;
+
+ if (termios->c_cflag & PARENB) {
+ new_conf |= WC_PARITY_ENABLE;
+ parity |= UART_LCR_PARITY;
+ } else
+ new_conf &= ~WC_PARITY_ENABLE;
+
+ if (!(termios->c_cflag & PARODD))
+ parity |= UART_LCR_EPAR;
+ max->parity = parity;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ new_conf |= WC_TAG;
+ if (new_conf != max->cur_conf) {
+ max3110_out(max, new_conf);
+ max->cur_conf = new_conf;
+ max->baud = baud;
+ }
+}
+
+/* don't handle hw handshaking */
+static unsigned int serial_m3110_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR;
+}
+
+static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void serial_m3110_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static void serial_m3110_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+}
+
+static void serial_m3110_enable_ms(struct uart_port *port)
+{
+}
+
+struct uart_ops serial_m3110_ops = {
+ .tx_empty = serial_m3110_tx_empty,
+ .set_mctrl = serial_m3110_set_mctrl,
+ .get_mctrl = serial_m3110_get_mctrl,
+ .stop_tx = serial_m3110_stop_tx,
+ .start_tx = serial_m3110_start_tx,
+ .stop_rx = serial_m3110_stop_rx,
+ .enable_ms = serial_m3110_enable_ms,
+ .break_ctl = serial_m3110_break_ctl,
+ .startup = serial_m3110_startup,
+ .shutdown = serial_m3110_shutdown,
+ .set_termios = serial_m3110_set_termios, /* must have */
+ .pm = serial_m3110_pm,
+ .type = serial_m3110_type,
+ .release_port = serial_m3110_release_port,
+ .request_port = serial_m3110_request_port,
+ .config_port = serial_m3110_config_port,
+ .verify_port = serial_m3110_verify_port,
+};
+
+static struct uart_driver serial_m3110_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "MRST serial",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = 1,
+ .cons = MRST_CONSOLE,
+};
+
+static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state)
+{
+ return 0;
+}
+
+static int serial_m3110_resume(struct spi_device *spi)
+{
+ return 0;
+}
+
+static struct dw_spi_chip spi0_uart = {
+ .poll_mode = 1,
+ .enable_dma = 0,
+ .type = SPI_FRF_SPI,
+};
+
+static int serial_m3110_probe(struct spi_device *spi)
+{
+ struct uart_max3110 *max;
+ int ret;
+ unsigned char *buffer;
+ u16 res;
+ max = kzalloc(sizeof(*max), GFP_KERNEL);
+ if (!max)
+ return -ENOMEM;
+
+ /* set spi info */
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 16;
+ max->clock = MAX3110_HIGH_CLK;
+ spi->controller_data = &spi0_uart;
+
+ spi_setup(spi);
+
+ max->port.type = PORT_PXA; /* need apply for a max3110 type */
+ max->port.fifosize = 2; /* only have 16b buffer */
+ max->port.ops = &serial_m3110_ops;
+ max->port.line = 0;
+ max->port.dev = &spi->dev;
+ max->port.uartclk = 115200;
+
+ max->spi = spi;
+ max->name = spi->modalias; /* use spi name as the name */
+ max->irq = (u16)spi->irq;
+
+ mutex_init(&max->thread_mutex);
+
+ max->word_7bits = 0;
+ max->parity = 0;
+ max->baud = 0;
+
+ max->cur_conf = 0;
+ max->uart_flags = 0;
+
+ /* Check if reading configuration register returns something sane */
+
+ res = RC_TAG;
+ ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0);
+ if (ret < 0 || res == 0 || res == 0xffff) {
+ printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)",
+ res);
+ ret = -ENODEV;
+ goto err_get_page;
+ }
+ buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
+ if (!buffer) {
+ ret = -ENOMEM;
+ goto err_get_page;
+ }
+ max->con_xmit.buf = (unsigned char *)buffer;
+ max->con_xmit.head = max->con_xmit.tail = 0;
+
+ max->main_thread = kthread_run(max3110_main_thread,
+ max, "max3110_main");
+ if (IS_ERR(max->main_thread)) {
+ ret = PTR_ERR(max->main_thread);
+ goto err_kthread;
+ }
+
+ pmax = max;
+ /* give membase a psudo value to pass serial_core's check */
+ max->port.membase = (void *)0xff110000;
+ uart_add_one_port(&serial_m3110_reg, &max->port);
+
+ return 0;
+
+err_kthread:
+ free_page((unsigned long)buffer);
+err_get_page:
+ pmax = NULL;
+ kfree(max);
+ return ret;
+}
+
+static int max3110_remove(struct spi_device *dev)
+{
+ struct uart_max3110 *max = pmax;
+
+ if (!pmax)
+ return 0;
+
+ pmax = NULL;
+ uart_remove_one_port(&serial_m3110_reg, &max->port);
+
+ free_page((unsigned long)max->con_xmit.buf);
+
+ if (max->main_thread)
+ kthread_stop(max->main_thread);
+
+ kfree(max);
+ return 0;
+}
+
+static struct spi_driver uart_max3110_driver = {
+ .driver = {
+ .name = "spi_max3111",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = serial_m3110_probe,
+ .remove = __devexit_p(max3110_remove),
+ .suspend = serial_m3110_suspend,
+ .resume = serial_m3110_resume,
+};
+
+
+int __init serial_m3110_init(void)
+{
+ int ret = 0;
+
+ ret = uart_register_driver(&serial_m3110_reg);
+ if (ret)
+ return ret;
+
+ ret = spi_register_driver(&uart_max3110_driver);
+ if (ret)
+ uart_unregister_driver(&serial_m3110_reg);
+
+ return ret;
+}
+
+void __exit serial_m3110_exit(void)
+{
+ spi_unregister_driver(&uart_max3110_driver);
+ uart_unregister_driver(&serial_m3110_reg);
+}
+
+module_init(serial_m3110_init);
+module_exit(serial_m3110_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("max3110-uart");
--- /dev/null
+#ifndef _MRST_MAX3110_H
+#define _MRST_MAX3110_H
+
+#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */
+#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */
+
+/* status bits for all 4 MAX3110 operate modes */
+#define MAX3110_READ_DATA_AVAILABLE (1 << 15)
+#define MAX3110_WRITE_BUF_EMPTY (1 << 14)
+
+#define WC_TAG (3 << 14)
+#define RC_TAG (1 << 14)
+#define WD_TAG (2 << 14)
+#define RD_TAG (0 << 14)
+
+/* bits def for write configuration */
+#define WC_FIFO_ENABLE_MASK (1 << 13)
+#define WC_FIFO_ENABLE (0 << 13)
+
+#define WC_SW_SHDI (1 << 12)
+
+#define WC_IRQ_MASK (0xF << 8)
+#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */
+#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX availabe irq */
+#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9)
+#define WC_REC_ACT_IRQ_ENABLE (1 << 8)
+
+#define WC_IRDA_ENABLE (1 << 7)
+
+#define WC_STOPBITS_MASK (1 << 6)
+#define WC_2_STOPBITS (1 << 6)
+#define WC_1_STOPBITS (0 << 6)
+
+#define WC_PARITY_ENABLE_MASK (1 << 5)
+#define WC_PARITY_ENABLE (1 << 5)
+
+#define WC_WORDLEN_MASK (1 << 4)
+#define WC_7BIT_WORD (1 << 4)
+#define WC_8BIT_WORD (0 << 4)
+
+#define WC_BAUD_DIV_MASK (0xF)
+#define WC_BAUD_DR1 (0x0)
+#define WC_BAUD_DR2 (0x1)
+#define WC_BAUD_DR4 (0x2)
+#define WC_BAUD_DR8 (0x3)
+#define WC_BAUD_DR16 (0x4)
+#define WC_BAUD_DR32 (0x5)
+#define WC_BAUD_DR64 (0x6)
+#define WC_BAUD_DR128 (0x7)
+#define WC_BAUD_DR3 (0x8)
+#define WC_BAUD_DR6 (0x9)
+#define WC_BAUD_DR12 (0xA)
+#define WC_BAUD_DR24 (0xB)
+#define WC_BAUD_DR48 (0xC)
+#define WC_BAUD_DR96 (0xD)
+#define WC_BAUD_DR192 (0xE)
+#define WC_BAUD_DR384 (0xF)
+
+#endif
mutex_lock(&nwpserial_mutex);
- dn = to_of_device(port->dev)->dev.of_node;
+ dn = port->dev->of_node;
if (dn == NULL)
goto out;
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/nwpserial.h>
-#include <asm/prom.h>
-
struct of_serial_info {
int type;
int line;
/*
* Fill a struct uart_port for a given device node
*/
-static int __devinit of_platform_serial_setup(struct of_device *ofdev,
+static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
int type, struct uart_port *port)
{
struct resource resource;
/*
* Try to register a serial port
*/
-static int __devinit of_platform_serial_probe(struct of_device *ofdev,
+static int __devinit of_platform_serial_probe(struct platform_device *ofdev,
const struct of_device_id *id)
{
struct of_serial_info *info;
/*
* Release a line
*/
-static int of_platform_serial_remove(struct of_device *ofdev)
+static int of_platform_serial_remove(struct platform_device *ofdev)
{
struct of_serial_info *info = dev_get_drvdata(&ofdev->dev);
switch (info->type) {
static int s5pv210_serial_setsource(struct uart_port *port,
struct s3c24xx_uart_clksrc *clk)
{
+ struct s3c2410_uartcfg *cfg = port->dev->platform_data;
unsigned long ucon = rd_regl(port, S3C2410_UCON);
+ if ((cfg->clocks_size) == 1)
+ return 0;
+
if (strcmp(clk->name, "pclk") == 0)
ucon &= ~S5PV210_UCON_CLKMASK;
else if (strcmp(clk->name, "uclk1") == 0)
static int s5pv210_serial_getsource(struct uart_port *port,
struct s3c24xx_uart_clksrc *clk)
{
+ struct s3c2410_uartcfg *cfg = port->dev->platform_data;
u32 ucon = rd_regl(port, S3C2410_UCON);
clk->divisor = 1;
+ if ((cfg->clocks_size) == 1)
+ return 0;
+
switch (ucon & S5PV210_UCON_CLKMASK) {
case S5PV210_UCON_PCLK:
clk->name = "pclk";
if (ourport->info->has_divslot) {
unsigned int div = ourport->baudclk_rate / baud;
- udivslot = udivslot_table[div & 15];
- dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+ if (cfg->has_fracval) {
+ udivslot = (div & 15);
+ dbg("fracval = %04x\n", udivslot);
+ } else {
+ udivslot = udivslot_table[div & 15];
+ dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+ }
}
switch (termios->c_cflag & CSIZE) {
#define uart_console(port) (0)
#endif
-static void uart_change_speed(struct uart_state *state,
+static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
struct ktermios *old_termios);
-static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
+static void __uart_wait_until_sent(struct uart_port *port, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
/*
* Startup the port. This will be called once per open. All calls
* will be serialised by the per-port mutex.
*/
-static int uart_startup(struct uart_state *state, int init_hw)
+static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw)
{
struct uart_port *uport = state->uart_port;
struct tty_port *port = &state->port;
* once we have successfully opened the port. Also set
* up the tty->alt_speed kludge
*/
- set_bit(TTY_IO_ERROR, &port->tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
if (uport->type == PORT_UNKNOWN)
return 0;
/*
* Initialise the hardware port settings.
*/
- uart_change_speed(state, NULL);
+ uart_change_speed(tty, state, NULL);
/*
* Setup the RTS and DTR signals once the
* port is open and ready to respond.
*/
- if (port->tty->termios->c_cflag & CBAUD)
+ if (tty->termios->c_cflag & CBAUD)
uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
}
if (port->flags & ASYNC_CTS_FLOW) {
spin_lock_irq(&uport->lock);
if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
- port->tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
spin_unlock_irq(&uport->lock);
}
set_bit(ASYNCB_INITIALIZED, &port->flags);
- clear_bit(TTY_IO_ERROR, &port->tty->flags);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
}
if (retval && capable(CAP_SYS_ADMIN))
* DTR is dropped if the hangup on close termio flag is on. Calls to
* uart_shutdown are serialised by the per-port semaphore.
*/
-static void uart_shutdown(struct uart_state *state)
+static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
{
struct uart_port *uport = state->uart_port;
struct tty_port *port = &state->port;
- struct tty_struct *tty = port->tty;
/*
* Set the TTY IO error marker
EXPORT_SYMBOL(uart_get_divisor);
/* FIXME: Consistent locking policy */
-static void
-uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
+static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
+ struct ktermios *old_termios)
{
struct tty_port *port = &state->port;
- struct tty_struct *tty = port->tty;
struct uart_port *uport = state->uart_port;
struct ktermios *termios;
uport->ops->set_termios(uport, termios, old_termios);
}
-static inline int
-__uart_put_char(struct uart_port *port, struct circ_buf *circ, unsigned char c)
+static inline int __uart_put_char(struct uart_port *port,
+ struct circ_buf *circ, unsigned char c)
{
unsigned long flags;
int ret = 0;
uart_start(tty);
}
-static int
-uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
+static int uart_write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port;
return 0;
}
-static int uart_set_info(struct uart_state *state,
+static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
struct serial_struct __user *newinfo)
{
struct serial_struct new_serial;
* We need to shutdown the serial port at the old
* port/type/irq combination.
*/
- uart_shutdown(state);
+ uart_shutdown(tty, state);
}
if (change_port) {
"is deprecated.\n", current->comm,
tty_name(port->tty, buf));
}
- uart_change_speed(state, NULL);
+ uart_change_speed(tty, state, NULL);
}
} else
- retval = uart_startup(state, 1);
+ retval = uart_startup(tty, state, 1);
exit:
mutex_unlock(&port->mutex);
return retval;
}
-
-/*
- * uart_get_lsr_info - get line status register info.
- * Note: uart_ioctl protects us against hangups.
+/**
+ * uart_get_lsr_info - get line status register info
+ * @tty: tty associated with the UART
+ * @state: UART being queried
+ * @value: returned modem value
+ *
+ * Note: uart_ioctl protects us against hangups.
*/
-static int uart_get_lsr_info(struct uart_state *state,
- unsigned int __user *value)
+static int uart_get_lsr_info(struct tty_struct *tty,
+ struct uart_state *state, unsigned int __user *value)
{
struct uart_port *uport = state->uart_port;
- struct tty_port *port = &state->port;
unsigned int result;
result = uport->ops->tx_empty(uport);
*/
if (uport->x_char ||
((uart_circ_chars_pending(&state->xmit) > 0) &&
- !port->tty->stopped && !port->tty->hw_stopped))
+ !tty->stopped && !tty->hw_stopped))
result &= ~TIOCSER_TEMT;
return put_user(result, value);
return 0;
}
-static int uart_do_autoconfig(struct uart_state *state)
+static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state)
{
struct uart_port *uport = state->uart_port;
struct tty_port *port = &state->port;
ret = -EBUSY;
if (tty_port_users(port) == 1) {
- uart_shutdown(state);
+ uart_shutdown(tty, state);
/*
* If we already have a port type configured,
*/
uport->ops->config_port(uport, flags);
- ret = uart_startup(state, 1);
+ ret = uart_startup(tty, state, 1);
}
mutex_unlock(&port->mutex);
return ret;
break;
case TIOCSSERIAL:
- ret = uart_set_info(state, uarg);
+ ret = uart_set_info(tty, state, uarg);
break;
case TIOCSERCONFIG:
- ret = uart_do_autoconfig(state);
+ ret = uart_do_autoconfig(tty, state);
break;
case TIOCSERGWILD: /* obsolete */
*/
switch (cmd) {
case TIOCSERGETLSR: /* Get line status register */
- ret = uart_get_lsr_info(state, uarg);
+ ret = uart_get_lsr_info(tty, state, uarg);
break;
default: {
struct uart_port *uport = state->uart_port;
if (uport->ops->set_ldisc)
- uport->ops->set_ldisc(uport);
+ uport->ops->set_ldisc(uport, tty->termios->c_line);
}
static void uart_set_termios(struct tty_struct *tty,
return;
}
- uart_change_speed(state, old_termios);
+ uart_change_speed(tty, state, old_termios);
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
struct uart_state *state = tty->driver_data;
struct tty_port *port;
struct uart_port *uport;
+ unsigned long flags;
- BUG_ON(!kernel_locked());
+ BUG_ON(!tty_locked());
if (!state)
return;
pr_debug("uart_close(%d) called\n", uport->line);
mutex_lock(&port->mutex);
+ spin_lock_irqsave(&port->lock, flags);
- if (tty_hung_up_p(filp))
+ if (tty_hung_up_p(filp)) {
+ spin_unlock_irqrestore(&port->lock, flags);
goto done;
+ }
if ((tty->count == 1) && (port->count != 1)) {
/*
tty->name, port->count);
port->count = 0;
}
- if (port->count)
+ if (port->count) {
+ spin_unlock_irqrestore(&port->lock, flags);
goto done;
+ }
/*
* Now we wait for the transmit buffer to clear; and we notify
* setting tty->closing.
*/
tty->closing = 1;
+ spin_unlock_irqrestore(&port->lock, flags);
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait));
+ if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+ /*
+ * hack: open-coded tty_wait_until_sent to avoid
+ * recursive tty_lock
+ */
+ long timeout = msecs_to_jiffies(port->closing_wait);
+ if (wait_event_interruptible_timeout(tty->write_wait,
+ !tty_chars_in_buffer(tty), timeout) >= 0)
+ __uart_wait_until_sent(uport, timeout);
+ }
/*
* At this point, we stop accepting input. To do this, we
* has completely drained; this is especially
* important if there is a transmit FIFO!
*/
- uart_wait_until_sent(tty, uport->timeout);
+ __uart_wait_until_sent(uport, uport->timeout);
}
- uart_shutdown(state);
+ uart_shutdown(tty, state);
uart_flush_buffer(tty);
tty_ldisc_flush(tty);
- tty->closing = 0;
tty_port_tty_set(port, NULL);
+ spin_lock_irqsave(&port->lock, flags);
+ tty->closing = 0;
if (port->blocked_open) {
+ spin_unlock_irqrestore(&port->lock, flags);
if (port->close_delay)
msleep_interruptible(port->close_delay);
+ spin_lock_irqsave(&port->lock, flags);
} else if (!uart_console(uport)) {
+ spin_unlock_irqrestore(&port->lock, flags);
uart_change_pm(state, 3);
+ spin_lock_irqsave(&port->lock, flags);
}
/*
* Wake up anyone trying to open this port.
*/
clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+ spin_unlock_irqrestore(&port->lock, flags);
wake_up_interruptible(&port->open_wait);
done:
mutex_unlock(&port->mutex);
}
-static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
+static void __uart_wait_until_sent(struct uart_port *port, int timeout)
{
- struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->uart_port;
unsigned long char_time, expire;
if (port->type == PORT_UNKNOWN || port->fifosize == 0)
return;
- lock_kernel();
-
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
break;
}
set_current_state(TASK_RUNNING); /* might not be needed */
- unlock_kernel();
+}
+
+static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->uart_port;
+
+ tty_lock();
+ __uart_wait_until_sent(port, timeout);
+ tty_unlock();
}
/*
{
struct uart_state *state = tty->driver_data;
struct tty_port *port = &state->port;
+ unsigned long flags;
- BUG_ON(!kernel_locked());
+ BUG_ON(!tty_locked());
pr_debug("uart_hangup(%d)\n", state->uart_port->line);
mutex_lock(&port->mutex);
if (port->flags & ASYNC_NORMAL_ACTIVE) {
uart_flush_buffer(tty);
- uart_shutdown(state);
+ uart_shutdown(tty, state);
+ spin_lock_irqsave(&port->lock, flags);
port->count = 0;
clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+ spin_unlock_irqrestore(&port->lock, flags);
tty_port_tty_set(port, NULL);
wake_up_interruptible(&port->open_wait);
wake_up_interruptible(&port->delta_msr_wait);
mutex_unlock(&port->mutex);
}
-/*
- * Copy across the serial console cflag setting into the termios settings
- * for the initial open of the port. This allows continuity between the
- * kernel settings, and the settings init adopts when it opens the port
- * for the first time.
+/**
+ * uart_update_termios - update the terminal hw settings
+ * @tty: tty associated with UART
+ * @state: UART to update
+ *
+ * Copy across the serial console cflag setting into the termios settings
+ * for the initial open of the port. This allows continuity between the
+ * kernel settings, and the settings init adopts when it opens the port
+ * for the first time.
*/
-static void uart_update_termios(struct uart_state *state)
+static void uart_update_termios(struct tty_struct *tty,
+ struct uart_state *state)
{
- struct tty_struct *tty = state->port.tty;
struct uart_port *port = state->uart_port;
if (uart_console(port) && port->cons->cflag) {
/*
* Make termios settings take effect.
*/
- uart_change_speed(state, NULL);
+ uart_change_speed(tty, state, NULL);
/*
* And finally enable the RTS and DTR signals.
}
}
-/*
- * Block the open until the port is ready. We must be called with
- * the per-port semaphore held.
- */
-static int
-uart_block_til_ready(struct file *filp, struct uart_state *state)
+static int uart_carrier_raised(struct tty_port *port)
{
- DECLARE_WAITQUEUE(wait, current);
+ struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport = state->uart_port;
- struct tty_port *port = &state->port;
- unsigned int mctrl;
-
- port->blocked_open++;
- port->count--;
-
- add_wait_queue(&port->open_wait, &wait);
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- /*
- * If we have been hung up, tell userspace/restart open.
- */
- if (tty_hung_up_p(filp) || port->tty == NULL)
- break;
-
- /*
- * If the port has been closed, tell userspace/restart open.
- */
- if (!(port->flags & ASYNC_INITIALIZED))
- break;
+ int mctrl;
+ spin_lock_irq(&uport->lock);
+ uport->ops->enable_ms(uport);
+ mctrl = uport->ops->get_mctrl(uport);
+ spin_unlock_irq(&uport->lock);
+ if (mctrl & TIOCM_CAR)
+ return 1;
+ return 0;
+}
- /*
- * If non-blocking mode is set, or CLOCAL mode is set,
- * we don't want to wait for the modem status lines to
- * indicate that the port is ready.
- *
- * Also, if the port is not enabled/configured, we want
- * to allow the open to succeed here. Note that we will
- * have set TTY_IO_ERROR for a non-existant port.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (port->tty->termios->c_cflag & CLOCAL) ||
- (port->tty->flags & (1 << TTY_IO_ERROR)))
- break;
+static void uart_dtr_rts(struct tty_port *port, int onoff)
+{
+ struct uart_state *state = container_of(port, struct uart_state, port);
+ struct uart_port *uport = state->uart_port;
- /*
- * Set DTR to allow modem to know we're waiting. Do
- * not set RTS here - we want to make sure we catch
- * the data from the modem.
- */
- if (port->tty->termios->c_cflag & CBAUD)
- uart_set_mctrl(uport, TIOCM_DTR);
+ if (onoff) {
+ uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
/*
- * and wait for the carrier to indicate that the
- * modem is ready for us.
+ * If this is the first open to succeed,
+ * adjust things to suit.
*/
- spin_lock_irq(&uport->lock);
- uport->ops->enable_ms(uport);
- mctrl = uport->ops->get_mctrl(uport);
- spin_unlock_irq(&uport->lock);
- if (mctrl & TIOCM_CAR)
- break;
-
- mutex_unlock(&port->mutex);
- schedule();
- mutex_lock(&port->mutex);
-
- if (signal_pending(current))
- break;
+ if (!test_and_set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags))
+ uart_update_termios(port->tty, state);
}
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
-
- port->count++;
- port->blocked_open--;
-
- if (signal_pending(current))
- return -ERESTARTSYS;
-
- if (!port->tty || tty_hung_up_p(filp))
- return -EAGAIN;
-
- return 0;
+ else
+ uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
}
static struct uart_state *uart_get(struct uart_driver *drv, int line)
struct tty_port *port;
int retval, line = tty->index;
- BUG_ON(!kernel_locked());
+ BUG_ON(!tty_locked());
pr_debug("uart_open(%d) called\n", line);
/*
/*
* Start up the serial port.
*/
- retval = uart_startup(state, 0);
+ retval = uart_startup(tty, state, 0);
/*
* If we succeeded, wait until the port is ready.
*/
- if (retval == 0)
- retval = uart_block_til_ready(filp, state);
mutex_unlock(&port->mutex);
-
- /*
- * If this is the first open to succeed, adjust things to suit.
- */
- if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
- set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
-
- uart_update_termios(state);
- }
+ if (retval == 0)
+ retval = tty_port_block_til_ready(port, tty, filp);
fail:
return retval;
struct tty_port *port = &state->port;
struct device *tty_dev;
struct uart_match match = {uport, drv};
+ struct tty_struct *tty;
mutex_lock(&port->mutex);
+ /* Must be inside the mutex lock until we convert to tty_port */
+ tty = port->tty;
+
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (device_may_wakeup(tty_dev)) {
enable_irq_wake(uport->irq);
ops->set_mctrl(uport, 0);
spin_unlock_irq(&uport->lock);
if (console_suspend_enabled || !uart_console(uport)) {
+ /* Protected by port mutex for now */
+ struct tty_struct *tty = port->tty;
ret = ops->startup(uport);
if (ret == 0) {
- uart_change_speed(state, NULL);
+ if (tty)
+ uart_change_speed(tty, state, NULL);
spin_lock_irq(&uport->lock);
ops->set_mctrl(uport, uport->mctrl);
ops->start_tx(uport);
* Clear the "initialized" flag so we won't try
* to call the low level drivers shutdown method.
*/
- uart_shutdown(state);
+ uart_shutdown(tty, state);
}
}
#endif
};
+static const struct tty_port_operations uart_port_ops = {
+ .carrier_raised = uart_carrier_raised,
+ .dtr_rts = uart_dtr_rts,
+};
+
/**
* uart_register_driver - register a driver with the uart core layer
* @drv: low level driver structure
struct tty_port *port = &state->port;
tty_port_init(port);
+ port->ops = &uart_port_ops;
port->close_delay = 500; /* .5 seconds */
port->closing_wait = 30000; /* 30 seconds */
tasklet_init(&state->tlet, uart_tasklet_action,
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
}
}
+#elif defined(CONFIG_ARCH_SH7372)
+static int scif_txfill(struct uart_port *port)
+{
+ if (port->type == PORT_SCIFA)
+ return sci_in(port, SCFDR) >> 8;
+ else
+ return sci_in(port, SCTFDR);
+}
+
+static int scif_txroom(struct uart_port *port)
+{
+ return port->fifosize - scif_txfill(port);
+}
+
+static int scif_rxfill(struct uart_port *port)
+{
+ if (port->type == PORT_SCIFA)
+ return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
+ else
+ return sci_in(port, SCRFDR);
+}
#else
static int scif_txfill(struct uart_port *port)
{
u16 ssr = sci_in(port, SCxSR);
/* Disable future Rx interrupts */
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
disable_irq_nosync(irq);
scr |= 0x4000;
} else {
if (!uart_circ_empty(xmit)) {
schedule_work(&s->work_tx);
- } else if (port->type == PORT_SCIFA) {
+ } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 ctrl = sci_in(port, SCSCR);
sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE);
}
unsigned short ctrl;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 new, scr = sci_in(port, SCSCR);
if (s->chan_tx)
new = scr | 0x8000;
s->cookie_tx < 0)
schedule_work(&s->work_tx);
#endif
- if (!s->chan_tx || port->type == PORT_SCIFA) {
+ if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE);
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x8000;
ctrl &= ~SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl |= sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
sci_out(port, SCSCR, ctrl);
}
/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
sci_out(port, SCSCR, ctrl);
struct uart_port *port = &s->port;
u16 scr = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
scr &= ~0x4000;
enable_irq(s->irqs[1]);
}
return "scif";
case PORT_SCIFA:
return "scifa";
+ case PORT_SCIFB:
+ return "scifb";
}
return NULL;
port->line = index;
switch (p->type) {
+ case PORT_SCIFB:
+ port->fifosize = 256;
+ break;
case PORT_SCIFA:
port->fifosize = 64;
break;
#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
static inline unsigned int sci_##name##_in(struct uart_port *port) \
{ \
- if (port->type == PORT_SCIF) { \
+ if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \
SCI_IN(scif_size, scif_offset) \
} else { /* PORT_SCI or PORT_SCIFA */ \
SCI_IN(sci_size, sci_offset); \
} \
static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
{ \
- if (port->type == PORT_SCIF) { \
+ if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \
SCI_OUT(scif_size, scif_offset, value) \
} else { /* PORT_SCI or PORT_SCIFA */ \
SCI_OUT(sci_size, sci_offset, value); \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
- defined(CONFIG_ARCH_SH7377) || \
- defined(CONFIG_ARCH_SH7372)
+ defined(CONFIG_ARCH_SH7377)
+#define SCIF_FNS(name, scif_offset, scif_size) \
+ CPU_SCIF_FNS(name, scif_offset, scif_size)
+#elif defined(CONFIG_ARCH_SH7372)
+#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \
+ CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
- defined(CONFIG_ARCH_SH7377) || \
- defined(CONFIG_ARCH_SH7372)
+ defined(CONFIG_ARCH_SH7377)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x00, 0)
+#elif defined(CONFIG_ARCH_SH7372)
+SCIF_FNS(SCSMR, 0x00, 16)
+SCIF_FNS(SCBRR, 0x04, 8)
+SCIF_FNS(SCSCR, 0x08, 16)
+SCIF_FNS(SCTDSR, 0x0c, 16)
+SCIF_FNS(SCFER, 0x10, 16)
+SCIF_FNS(SCxSR, 0x14, 16)
+SCIF_FNS(SCFCR, 0x18, 16)
+SCIF_FNS(SCFDR, 0x1c, 16)
+SCIF_FNS(SCTFDR, 0x38, 16)
+SCIF_FNS(SCRFDR, 0x3c, 16)
+SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8)
+SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8)
+SCIF_FNS(SCLSR, 0x00, 0)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
defined(CONFIG_CPU_SUBTYPE_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
int sunserial_console_match(struct console *con, struct device_node *dp,
struct uart_driver *drv, int line, bool ignore_line)
{
- if (!con || of_console_device != dp)
+ if (!con)
+ return 0;
+
+ drv->cons = con;
+
+ if (of_console_device != dp)
return 0;
if (!ignore_line) {
return 0;
}
- con->index = line;
- drv->cons = con;
-
- if (!console_set_on_cmdline)
+ if (!console_set_on_cmdline) {
+ con->index = line;
add_preferred_console(con->name, line, NULL);
-
+ }
return 1;
}
EXPORT_SYMBOL(sunserial_console_match);
.data = &sunhv_reg,
};
-static int __devinit hv_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit hv_probe(struct platform_device *op, const struct of_device_id *match)
{
struct uart_port *port;
unsigned long minor;
return err;
}
-static int __devexit hv_remove(struct of_device *dev)
+static int __devexit hv_remove(struct platform_device *dev)
{
struct uart_port *port = dev_get_drvdata(&dev->dev);
printk("Console: ttyS%d (SAB82532)\n",
(sunsab_reg.minor - 64) + con->index);
- sunserial_console_termios(con, to_of_device(up->port.dev)->dev.of_node);
+ sunserial_console_termios(con, up->port.dev->of_node);
switch (con->cflag & CBAUD) {
case B150: baud = 150; break;
#endif
static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
- struct of_device *op,
+ struct platform_device *op,
unsigned long offset,
int line)
{
return 0;
}
-static int __devinit sab_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit sab_probe(struct platform_device *op, const struct of_device_id *match)
{
static int inst;
struct uart_sunsab_port *up;
return err;
}
-static int __devexit sab_remove(struct of_device *op)
+static int __devexit sab_remove(struct platform_device *op)
{
struct uart_sunsab_port *up = dev_get_drvdata(&op->dev);
return -ENODEV;
printk("%s: %s port at %llx, irq %u\n",
- to_of_device(up->port.dev)->dev.of_node->full_name,
+ up->port.dev->of_node->full_name,
(up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
(unsigned long long) up->port.mapbase,
up->port.irq);
spin_lock_init(&port->lock);
/* Get firmware console settings. */
- sunserial_console_termios(co, to_of_device(port->dev)->dev.of_node);
+ sunserial_console_termios(co, port->dev->of_node);
memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = co->cflag;
return SU_PORT_PORT;
}
-static int __devinit su_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit su_probe(struct platform_device *op, const struct of_device_id *match)
{
static int inst;
struct device_node *dp = op->dev.of_node;
return err;
}
-static int __devexit su_remove(struct of_device *op)
+static int __devexit su_remove(struct platform_device *op)
{
struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
bool kbdms = false;
(sunzilog_reg.minor - 64) + con->index, con->index);
/* Get firmware console settings. */
- sunserial_console_termios(con, to_of_device(up->port.dev)->dev.of_node);
+ sunserial_console_termios(con, up->port.dev->of_node);
/* Firmware console speed is limited to 150-->38400 baud so
* this hackish cflag thing is OK.
static int zilog_irq = -1;
-static int __devinit zs_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit zs_probe(struct platform_device *op, const struct of_device_id *match)
{
static int kbm_inst, uart_inst;
int inst;
uart_remove_one_port(&sunzilog_reg, &up->port);
}
-static int __devexit zs_remove(struct of_device *op)
+static int __devexit zs_remove(struct platform_device *op)
{
struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev);
struct zilog_layout __iomem *regs;
.nr = 1
};
-static int timbuart_probe(struct platform_device *dev)
+static int __devinit timbuart_probe(struct platform_device *dev)
{
int err, irq;
struct timbuart_port *uart;
return err;
}
-static int timbuart_remove(struct platform_device *dev)
+static int __devexit timbuart_remove(struct platform_device *dev)
{
struct timbuart_port *uart = platform_get_drvdata(dev);
.owner = THIS_MODULE,
},
.probe = timbuart_probe,
- .remove = timbuart_remove,
+ .remove = __devexit_p(timbuart_remove),
};
/*--------------------------------------------------------------------------*/
*/
#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
static int __devinit
-ulite_of_probe(struct of_device *op, const struct of_device_id *match)
+ulite_of_probe(struct platform_device *op, const struct of_device_id *match)
{
struct resource res;
const unsigned int *id;
return ulite_assign(&op->dev, id ? *id : -1, res.start, irq);
}
-static int __devexit ulite_of_remove(struct of_device *op)
+static int __devexit ulite_of_remove(struct platform_device *op)
{
return ulite_release(&op->dev);
}
release_firmware(fw);
}
-static int ucc_uart_probe(struct of_device *ofdev,
+static int ucc_uart_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
return 0;
}
-static int ucc_uart_remove(struct of_device *ofdev)
+static int ucc_uart_remove(struct platform_device *ofdev)
{
struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev);
#
# Makefile for the SuperH specific drivers.
#
+obj-y := clk.o intc.o
+
obj-$(CONFIG_SUPERHYWAY) += superhyway/
obj-$(CONFIG_MAPLE) += maple/
+
obj-$(CONFIG_GENERIC_GPIO) += pfc.o
-obj-$(CONFIG_SUPERH) += clk.o
obj-$(CONFIG_SH_CLK_CPG) += clk-cpg.o
-obj-y += intc.o
return clk->freq_table[idx].frequency;
}
+static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct clk_div_mult_table *table = &sh_clk_div6_table;
+ u32 value;
+ int ret, i;
+
+ if (!clk->parent_table || !clk->parent_num)
+ return -EINVAL;
+
+ /* Search the parent */
+ for (i = 0; i < clk->parent_num; i++)
+ if (clk->parent_table[i] == parent)
+ break;
+
+ if (i == clk->parent_num)
+ return -ENODEV;
+
+ ret = clk_reparent(clk, parent);
+ if (ret < 0)
+ return ret;
+
+ value = __raw_readl(clk->enable_reg) &
+ ~(((1 << clk->src_width) - 1) << clk->src_shift);
+
+ __raw_writel(value | (i << clk->src_shift), clk->enable_reg);
+
+ /* Rebuild the frequency table */
+ clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
+ table, &clk->arch_flags);
+
+ return 0;
+}
+
static int sh_clk_div6_set_rate(struct clk *clk,
unsigned long rate, int algo_id)
{
.disable = sh_clk_div6_disable,
};
-int __init sh_clk_div6_register(struct clk *clks, int nr)
+static struct clk_ops sh_clk_div6_reparent_clk_ops = {
+ .recalc = sh_clk_div6_recalc,
+ .round_rate = sh_clk_div_round_rate,
+ .set_rate = sh_clk_div6_set_rate,
+ .enable = sh_clk_div6_enable,
+ .disable = sh_clk_div6_disable,
+ .set_parent = sh_clk_div6_set_parent,
+};
+
+static int __init sh_clk_div6_register_ops(struct clk *clks, int nr,
+ struct clk_ops *ops)
{
struct clk *clkp;
void *freq_table;
for (k = 0; !ret && (k < nr); k++) {
clkp = clks + k;
- clkp->ops = &sh_clk_div6_clk_ops;
+ clkp->ops = ops;
clkp->id = -1;
clkp->freq_table = freq_table + (k * freq_table_size);
clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
return ret;
}
+int __init sh_clk_div6_register(struct clk *clks, int nr)
+{
+ return sh_clk_div6_register_ops(clks, nr, &sh_clk_div6_clk_ops);
+}
+
+int __init sh_clk_div6_reparent_register(struct clk *clks, int nr)
+{
+ return sh_clk_div6_register_ops(clks, nr,
+ &sh_clk_div6_reparent_clk_ops);
+}
+
static unsigned long sh_clk_div4_recalc(struct clk *clk)
{
struct clk_div4_table *d4t = clk->priv;
}
-static int __init
+static int __devinit
pl022_probe(struct amba_device *adev, struct amba_id *id)
{
struct device *dev = &adev->dev;
return status;
}
-static int __exit
+static int __devexit
pl022_remove(struct amba_device *adev)
{
struct pl022 *pl022 = amba_get_drvdata(adev);
},
.id_table = pl022_ids,
.probe = pl022_probe,
- .remove = __exit_p(pl022_remove),
+ .remove = __devexit_p(pl022_remove),
.suspend = pl022_suspend,
.resume = pl022_resume,
};
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/io.h>
}
/* bus_num is used only for the case dev->platform_data == NULL */
-static int __init mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
- u32 size, unsigned int irq,
- s16 bus_num)
+static int __devinit mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
+ u32 size, unsigned int irq,
+ s16 bus_num)
{
struct fsl_spi_platform_data *pdata = dev->platform_data;
struct mpc512x_psc_spi *mps;
return ret;
}
-static int __exit mpc512x_psc_spi_do_remove(struct device *dev)
+static int __devexit mpc512x_psc_spi_do_remove(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
return 0;
}
-static int __init mpc512x_psc_spi_of_probe(struct of_device *op,
- const struct of_device_id *match)
+static int __devinit mpc512x_psc_spi_of_probe(struct platform_device *op,
+ const struct of_device_id *match)
{
const u32 *regaddr_p;
u64 regaddr64, size64;
irq_of_parse_and_map(op->dev.of_node, 0), id);
}
-static int __exit mpc512x_psc_spi_of_remove(struct of_device *op)
+static int __devexit mpc512x_psc_spi_of_remove(struct platform_device *op)
{
return mpc512x_psc_spi_do_remove(&op->dev);
}
static struct of_platform_driver mpc512x_psc_spi_of_driver = {
.probe = mpc512x_psc_spi_of_probe,
- .remove = __exit_p(mpc512x_psc_spi_of_remove),
+ .remove = __devexit_p(mpc512x_psc_spi_of_remove),
.driver = {
.name = "mpc512x-psc-spi",
.owner = THIS_MODULE,
return 0;
}
-static int __init mpc52xx_psc_spi_of_probe(struct of_device *op,
+static int __init mpc52xx_psc_spi_of_probe(struct platform_device *op,
const struct of_device_id *match)
{
const u32 *regaddr_p;
irq_of_parse_and_map(op->dev.of_node, 0), id);
}
-static int __exit mpc52xx_psc_spi_of_remove(struct of_device *op)
+static int __exit mpc52xx_psc_spi_of_remove(struct platform_device *op)
{
return mpc52xx_psc_spi_do_remove(&op->dev);
}
/*
* OF Platform Bus Binding
*/
-static int __devinit mpc52xx_spi_probe(struct of_device *op,
+static int __devinit mpc52xx_spi_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct spi_master *master;
return rc;
}
-static int __devexit mpc52xx_spi_remove(struct of_device *op)
+static int __devexit mpc52xx_spi_remove(struct platform_device *op)
{
struct spi_master *master = dev_get_drvdata(&op->dev);
struct mpc52xx_spi *ms = spi_master_get_devdata(master);
{
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
- /* write 16-bit word */
+ /* write 16-bit word, shifting 8-bit data if necessary */
+ if (len <= 8) {
+ data <<= 8;
+ len = 16;
+ }
+
spi100k_enable_clock(master);
writew( data , spi100k->base + SPI_TX_MSB);
int dataH,dataL;
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
+ /* Always do at least 16 bits */
+ if (len <= 8)
+ len = 16;
+
spi100k_enable_clock(master);
writew(SPI_CTRL_SEN(0) |
SPI_CTRL_WORD_SIZE(len) |
c = count;
word_len = cs->word_len;
- /* RX_ONLY mode needs dummy data in TX reg */
- if (xfer->tx_buf == NULL)
- spi100k_write_data(spi->master,word_len, 0);
-
if (word_len <= 8) {
u8 *rx;
const u8 *tx;
do {
c-=1;
if (xfer->tx_buf != NULL)
- spi100k_write_data(spi->master,word_len, *tx);
+ spi100k_write_data(spi->master, word_len, *tx++);
if (xfer->rx_buf != NULL)
- *rx = spi100k_read_data(spi->master,word_len);
+ *rx++ = spi100k_read_data(spi->master, word_len);
} while(c);
} else if (word_len <= 16) {
u16 *rx;
if (t->len) {
unsigned count;
- /* RX_ONLY mode needs dummy data in TX reg */
- if (t->tx_buf == NULL)
- spi100k_write_data(spi->master, 8, 0);
-
count = omap1_spi100k_txrx_pio(spi, t);
m->actual_length += count;
dynamic = 1;
}
+ spin_lock_init(&master->bus_lock_spinlock);
+ mutex_init(&master->bus_lock_mutex);
+ master->bus_lock_flag = 0;
+
/* register the device, then userspace will see it.
* registration fails if the bus ID is in use.
*/
}
EXPORT_SYMBOL_GPL(spi_setup);
+static int __spi_async(struct spi_device *spi, struct spi_message *message)
+{
+ struct spi_master *master = spi->master;
+
+ /* Half-duplex links include original MicroWire, and ones with
+ * only one data pin like SPI_3WIRE (switches direction) or where
+ * either MOSI or MISO is missing. They can also be caused by
+ * software limitations.
+ */
+ if ((master->flags & SPI_MASTER_HALF_DUPLEX)
+ || (spi->mode & SPI_3WIRE)) {
+ struct spi_transfer *xfer;
+ unsigned flags = master->flags;
+
+ list_for_each_entry(xfer, &message->transfers, transfer_list) {
+ if (xfer->rx_buf && xfer->tx_buf)
+ return -EINVAL;
+ if ((flags & SPI_MASTER_NO_TX) && xfer->tx_buf)
+ return -EINVAL;
+ if ((flags & SPI_MASTER_NO_RX) && xfer->rx_buf)
+ return -EINVAL;
+ }
+ }
+
+ message->spi = spi;
+ message->status = -EINPROGRESS;
+ return master->transfer(spi, message);
+}
+
/**
* spi_async - asynchronous SPI transfer
* @spi: device with which data will be exchanged
int spi_async(struct spi_device *spi, struct spi_message *message)
{
struct spi_master *master = spi->master;
+ int ret;
+ unsigned long flags;
- /* Half-duplex links include original MicroWire, and ones with
- * only one data pin like SPI_3WIRE (switches direction) or where
- * either MOSI or MISO is missing. They can also be caused by
- * software limitations.
- */
- if ((master->flags & SPI_MASTER_HALF_DUPLEX)
- || (spi->mode & SPI_3WIRE)) {
- struct spi_transfer *xfer;
- unsigned flags = master->flags;
+ spin_lock_irqsave(&master->bus_lock_spinlock, flags);
- list_for_each_entry(xfer, &message->transfers, transfer_list) {
- if (xfer->rx_buf && xfer->tx_buf)
- return -EINVAL;
- if ((flags & SPI_MASTER_NO_TX) && xfer->tx_buf)
- return -EINVAL;
- if ((flags & SPI_MASTER_NO_RX) && xfer->rx_buf)
- return -EINVAL;
- }
- }
+ if (master->bus_lock_flag)
+ ret = -EBUSY;
+ else
+ ret = __spi_async(spi, message);
- message->spi = spi;
- message->status = -EINPROGRESS;
- return master->transfer(spi, message);
+ spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(spi_async);
+/**
+ * spi_async_locked - version of spi_async with exclusive bus usage
+ * @spi: device with which data will be exchanged
+ * @message: describes the data transfers, including completion callback
+ * Context: any (irqs may be blocked, etc)
+ *
+ * This call may be used in_irq and other contexts which can't sleep,
+ * as well as from task contexts which can sleep.
+ *
+ * The completion callback is invoked in a context which can't sleep.
+ * Before that invocation, the value of message->status is undefined.
+ * When the callback is issued, message->status holds either zero (to
+ * indicate complete success) or a negative error code. After that
+ * callback returns, the driver which issued the transfer request may
+ * deallocate the associated memory; it's no longer in use by any SPI
+ * core or controller driver code.
+ *
+ * Note that although all messages to a spi_device are handled in
+ * FIFO order, messages may go to different devices in other orders.
+ * Some device might be higher priority, or have various "hard" access
+ * time requirements, for example.
+ *
+ * On detection of any fault during the transfer, processing of
+ * the entire message is aborted, and the device is deselected.
+ * Until returning from the associated message completion callback,
+ * no other spi_message queued to that device will be processed.
+ * (This rule applies equally to all the synchronous transfer calls,
+ * which are wrappers around this core asynchronous primitive.)
+ */
+int spi_async_locked(struct spi_device *spi, struct spi_message *message)
+{
+ struct spi_master *master = spi->master;
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&master->bus_lock_spinlock, flags);
+
+ ret = __spi_async(spi, message);
+
+ spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
+
+ return ret;
+
+}
+EXPORT_SYMBOL_GPL(spi_async_locked);
+
/*-------------------------------------------------------------------------*/
complete(arg);
}
+static int __spi_sync(struct spi_device *spi, struct spi_message *message,
+ int bus_locked)
+{
+ DECLARE_COMPLETION_ONSTACK(done);
+ int status;
+ struct spi_master *master = spi->master;
+
+ message->complete = spi_complete;
+ message->context = &done;
+
+ if (!bus_locked)
+ mutex_lock(&master->bus_lock_mutex);
+
+ status = spi_async_locked(spi, message);
+
+ if (!bus_locked)
+ mutex_unlock(&master->bus_lock_mutex);
+
+ if (status == 0) {
+ wait_for_completion(&done);
+ status = message->status;
+ }
+ message->context = NULL;
+ return status;
+}
+
/**
* spi_sync - blocking/synchronous SPI data transfers
* @spi: device with which data will be exchanged
*/
int spi_sync(struct spi_device *spi, struct spi_message *message)
{
- DECLARE_COMPLETION_ONSTACK(done);
- int status;
-
- message->complete = spi_complete;
- message->context = &done;
- status = spi_async(spi, message);
- if (status == 0) {
- wait_for_completion(&done);
- status = message->status;
- }
- message->context = NULL;
- return status;
+ return __spi_sync(spi, message, 0);
}
EXPORT_SYMBOL_GPL(spi_sync);
+/**
+ * spi_sync_locked - version of spi_sync with exclusive bus usage
+ * @spi: device with which data will be exchanged
+ * @message: describes the data transfers
+ * Context: can sleep
+ *
+ * This call may only be used from a context that may sleep. The sleep
+ * is non-interruptible, and has no timeout. Low-overhead controller
+ * drivers may DMA directly into and out of the message buffers.
+ *
+ * This call should be used by drivers that require exclusive access to the
+ * SPI bus. It has to be preceeded by a spi_bus_lock call. The SPI bus must
+ * be released by a spi_bus_unlock call when the exclusive access is over.
+ *
+ * It returns zero on success, else a negative error code.
+ */
+int spi_sync_locked(struct spi_device *spi, struct spi_message *message)
+{
+ return __spi_sync(spi, message, 1);
+}
+EXPORT_SYMBOL_GPL(spi_sync_locked);
+
+/**
+ * spi_bus_lock - obtain a lock for exclusive SPI bus usage
+ * @master: SPI bus master that should be locked for exclusive bus access
+ * Context: can sleep
+ *
+ * This call may only be used from a context that may sleep. The sleep
+ * is non-interruptible, and has no timeout.
+ *
+ * This call should be used by drivers that require exclusive access to the
+ * SPI bus. The SPI bus must be released by a spi_bus_unlock call when the
+ * exclusive access is over. Data transfer must be done by spi_sync_locked
+ * and spi_async_locked calls when the SPI bus lock is held.
+ *
+ * It returns zero on success, else a negative error code.
+ */
+int spi_bus_lock(struct spi_master *master)
+{
+ unsigned long flags;
+
+ mutex_lock(&master->bus_lock_mutex);
+
+ spin_lock_irqsave(&master->bus_lock_spinlock, flags);
+ master->bus_lock_flag = 1;
+ spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
+
+ /* mutex remains locked until spi_bus_unlock is called */
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_bus_lock);
+
+/**
+ * spi_bus_unlock - release the lock for exclusive SPI bus usage
+ * @master: SPI bus master that was locked for exclusive bus access
+ * Context: can sleep
+ *
+ * This call may only be used from a context that may sleep. The sleep
+ * is non-interruptible, and has no timeout.
+ *
+ * This call releases an SPI bus lock previously obtained by an spi_bus_lock
+ * call.
+ *
+ * It returns zero on success, else a negative error code.
+ */
+int spi_bus_unlock(struct spi_master *master)
+{
+ master->bus_lock_flag = 0;
+
+ mutex_unlock(&master->bus_lock_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_bus_unlock);
+
/* portable code must never pass more than 32 bytes */
#define SPI_BUFSIZ max(32,SMP_CACHE_BYTES)
struct spi_bitbang *bitbang =
container_of(work, struct spi_bitbang, work);
unsigned long flags;
- int do_setup = -1;
int (*setup_transfer)(struct spi_device *,
struct spi_transfer *);
unsigned tmp;
unsigned cs_change;
int status;
+ int do_setup = -1;
m = container_of(bitbang->queue.next, struct spi_message,
queue);
status = setup_transfer(spi, t);
if (status < 0)
break;
+ if (do_setup == -1)
+ do_setup = 0;
}
/* set up default clock polarity, and activate chip;
m->status = status;
m->complete(m->context);
- /* restore speed and wordsize if it was overridden */
- if (do_setup == 1)
- setup_transfer(spi, NULL);
- do_setup = 0;
-
/* normally deactivate chipselect ... unless no error and
* cs_change has hinted that the next message will probably
* be for this chip too.
static inline u32
bitbang_txrx_be_cpha0(struct spi_device *spi,
- unsigned nsecs, unsigned cpol,
+ unsigned nsecs, unsigned cpol, unsigned flags,
u32 word, u8 bits)
{
/* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
for (word <<= (32 - bits); likely(bits); bits--) {
/* setup MSB (to slave) on trailing edge */
- setmosi(spi, word & (1 << 31));
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(spi, word & (1 << 31));
spidelay(nsecs); /* T(setup) */
setsck(spi, !cpol);
/* sample MSB (from slave) on leading edge */
word <<= 1;
- word |= getmiso(spi);
+ if ((flags & SPI_MASTER_NO_RX) == 0)
+ word |= getmiso(spi);
setsck(spi, cpol);
}
return word;
static inline u32
bitbang_txrx_be_cpha1(struct spi_device *spi,
- unsigned nsecs, unsigned cpol,
+ unsigned nsecs, unsigned cpol, unsigned flags,
u32 word, u8 bits)
{
/* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */
/* setup MSB (to slave) on leading edge */
setsck(spi, !cpol);
- setmosi(spi, word & (1 << 31));
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(spi, word & (1 << 31));
spidelay(nsecs); /* T(setup) */
setsck(spi, cpol);
/* sample MSB (from slave) on trailing edge */
word <<= 1;
- word |= getmiso(spi);
+ if ((flags & SPI_MASTER_NO_RX) == 0)
+ word |= getmiso(spi);
}
return word;
}
unsigned nsecs,
u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
}
/*----------------------------------------------------------------------*/
static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
}
static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
}
static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
}
static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
+}
+
+/*
+ * These functions do not call setmosi or getmiso if respective flag
+ * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to
+ * call when such pin is not present or defined in the controller.
+ * A separate set of callbacks is defined to get highest possible
+ * speed in the generic case (when both MISO and MOSI lines are
+ * available), as optimiser will remove the checks when argument is
+ * constant.
+ */
+
+static u32 spi_gpio_spec_txrx_word_mode0(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ unsigned flags = spi->master->flags;
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode1(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ unsigned flags = spi->master->flags;
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode2(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ unsigned flags = spi->master->flags;
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ unsigned flags = spi->master->flags;
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
}
/*----------------------------------------------------------------------*/
}
static int __init
-spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
+spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label,
+ u16 *res_flags)
{
int value;
/* NOTE: SPI_*_GPIO symbols may reference "pdata" */
- value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
- if (value)
- goto done;
+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) {
+ value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
+ if (value)
+ goto done;
+ } else {
+ /* HW configuration without MOSI pin */
+ *res_flags |= SPI_MASTER_NO_TX;
+ }
- value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
- if (value)
- goto free_mosi;
+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) {
+ value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
+ if (value)
+ goto free_mosi;
+ } else {
+ /* HW configuration without MISO pin */
+ *res_flags |= SPI_MASTER_NO_RX;
+ }
value = spi_gpio_alloc(SPI_SCK_GPIO, label, false);
if (value)
goto done;
free_miso:
- gpio_free(SPI_MISO_GPIO);
+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+ gpio_free(SPI_MISO_GPIO);
free_mosi:
- gpio_free(SPI_MOSI_GPIO);
+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+ gpio_free(SPI_MOSI_GPIO);
done:
return value;
}
struct spi_master *master;
struct spi_gpio *spi_gpio;
struct spi_gpio_platform_data *pdata;
+ u16 master_flags = 0;
pdata = pdev->dev.platform_data;
#ifdef GENERIC_BITBANG
return -ENODEV;
#endif
- status = spi_gpio_request(pdata, dev_name(&pdev->dev));
+ status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags);
if (status < 0)
return status;
if (pdata)
spi_gpio->pdata = *pdata;
+ master->flags = master_flags;
master->bus_num = pdev->id;
master->num_chipselect = SPI_N_CHIPSEL;
master->setup = spi_gpio_setup;
spi_gpio->bitbang.master = spi_master_get(master);
spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
- spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
- spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
- spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
- spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
+
+ if ((master_flags & (SPI_MASTER_NO_RX | SPI_MASTER_NO_RX)) == 0) {
+ spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
+ } else {
+ spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
+ }
spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
spi_gpio->bitbang.flags = SPI_CS_HIGH;
if (status < 0) {
spi_master_put(spi_gpio->bitbang.master);
gpio_free:
- gpio_free(SPI_MISO_GPIO);
- gpio_free(SPI_MOSI_GPIO);
+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+ gpio_free(SPI_MISO_GPIO);
+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+ gpio_free(SPI_MOSI_GPIO);
gpio_free(SPI_SCK_GPIO);
spi_master_put(master);
}
platform_set_drvdata(pdev, NULL);
- gpio_free(SPI_MISO_GPIO);
- gpio_free(SPI_MOSI_GPIO);
+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+ gpio_free(SPI_MISO_GPIO);
+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+ gpio_free(SPI_MOSI_GPIO);
gpio_free(SPI_SCK_GPIO);
return status;
*/
static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
}
static void spi_lm70llp_attach(struct parport *p)
return 0;
}
-static int __devinit of_mpc8xxx_spi_probe(struct of_device *ofdev,
+static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev,
const struct of_device_id *ofid)
{
struct device *dev = &ofdev->dev;
return ret;
}
-static int __devexit of_mpc8xxx_spi_remove(struct of_device *ofdev)
+static int __devexit of_mpc8xxx_spi_remove(struct platform_device *ofdev)
{
int ret;
}
/*
- * of_device layer stuff...
+ * platform_device layer stuff...
*/
-static int __init spi_ppc4xx_of_probe(struct of_device *op,
+static int __init spi_ppc4xx_of_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct ppc4xx_spi *hw;
return ret;
}
-static int __exit spi_ppc4xx_of_remove(struct of_device *op)
+static int __exit spi_ppc4xx_of_remove(struct platform_device *op)
{
struct spi_master *master = dev_get_drvdata(&op->dev);
struct ppc4xx_spi *hw = spi_master_get_devdata(master);
static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
}
static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
}
static u32 s3c2410_spigpio_txrx_mode2(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
}
static u32 s3c2410_spigpio_txrx_mode3(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
}
static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
}
static u32 sh_sci_spi_txrx_mode1(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
}
static u32 sh_sci_spi_txrx_mode2(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
}
static u32 sh_sci_spi_txrx_mode3(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
- return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
}
static void sh_sci_spi_chipselect(struct spi_device *dev, int value)
#include "xilinx_spi.h"
-static int __devinit xilinx_spi_of_probe(struct of_device *ofdev,
+static int __devinit xilinx_spi_of_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct spi_master *master;
return 0;
}
-static int __devexit xilinx_spi_remove(struct of_device *ofdev)
+static int __devexit xilinx_spi_remove(struct platform_device *ofdev)
{
xilinx_spi_deinit(dev_get_drvdata(&ofdev->dev));
dev_set_drvdata(&ofdev->dev, 0);
return 0;
}
-static int __exit xilinx_spi_of_remove(struct of_device *op)
+static int __exit xilinx_spi_of_remove(struct platform_device *op)
{
return xilinx_spi_remove(op);
}
void easycap_complete(struct urb *);
int easycap_open(struct inode *, struct file *);
int easycap_release(struct inode *, struct file *);
-int easycap_ioctl(struct inode *, struct file *, \
- unsigned int, unsigned long);
+long easycap_ioctl(struct file *, unsigned int, unsigned long);
/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
int easycap_open_noinode(struct file *);
int easycap_release_noinode(struct file *);
-long easycap_ioctl_noinode(struct file *, \
- unsigned int, unsigned long);
int videodev_release(struct video_device *);
#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
ssize_t easysnd_read(struct file *, char __user *, size_t, loff_t *);
int easysnd_open(struct inode *, struct file *);
int easysnd_release(struct inode *, struct file *);
-int easysnd_ioctl(struct inode *, struct file *, \
- unsigned int, unsigned long);
+long easysnd_ioctl(struct file *, unsigned int, unsigned long);
unsigned int easysnd_poll(struct file *, poll_table *);
void easysnd_delete(struct kref *);
int submit_audio_urbs(struct easycap *);
*/
/*****************************************************************************/
+#include <linux/smp_lock.h>
#include "easycap.h"
#include "easycap_debug.h"
#include "easycap_standard.h"
SAY("WARNING: failed to adjust mute: control not found\n");
return -ENOENT;
}
-/****************************************************************************/
-/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
-#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
-long
-easycap_ioctl_noinode(struct file *file, unsigned int cmd, unsigned long arg)\
- {
- return easycap_ioctl((struct inode *)NULL, file, cmd, arg);
-}
-#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+
/*--------------------------------------------------------------------------*/
-int easycap_ioctl(struct inode *inode, struct file *file, \
- unsigned int cmd, unsigned long arg)
+static int easycap_ioctl_bkl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
static struct easycap *peasycap;
static struct usb_device *p;
}
return 0;
}
-/****************************************************************************/
-/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
-#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
-long
-easysnd_ioctl_noinode(struct file *file, unsigned int cmd, unsigned long arg)
+
+long easycap_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- return easysnd_ioctl((struct inode *)NULL, file, cmd, arg);
+ struct inode *inode = file->f_dentry->d_inode;
+ long ret;
+
+ lock_kernel();
+ ret = easycap_ioctl_bkl(inode, file, cmd, arg);
+ unlock_kernel();
+
+ return ret;
}
-#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+
/*--------------------------------------------------------------------------*/
-int easysnd_ioctl(struct inode *inode, struct file *file, \
- unsigned int cmd, unsigned long arg)
+static int easysnd_ioctl_bkl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
struct easycap *peasycap;
struct usb_device *p;
}
return 0;
}
+
+long easysnd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct inode *inode = file->f_dentry->d_inode;
+ long ret;
+
+ lock_kernel();
+ ret = easysnd_ioctl_bkl(inode, file, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
/*****************************************************************************/
int explain_ioctl(__u32 wot)
{
*/
/*---------------------------------------------------------------------------*/
const struct file_operations easycap_fops = {
-.owner = THIS_MODULE,
-.open = easycap_open,
-.release = easycap_release,
-.ioctl = easycap_ioctl,
-.poll = easycap_poll,
-.mmap = easycap_mmap,
-.llseek = no_llseek,
+ .owner = THIS_MODULE,
+ .open = easycap_open,
+ .release = easycap_release,
+ .unlocked_ioctl = easycap_ioctl,
+ .poll = easycap_poll,
+ .mmap = easycap_mmap,
+ .llseek = no_llseek,
};
struct vm_operations_struct easycap_vm_ops = {
.open = easycap_vma_open,
#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
#if defined(EASYCAP_NEEDS_V4L2_FOPS)
const struct v4l2_file_operations v4l2_fops = {
-.owner = THIS_MODULE,
-.open = easycap_open_noinode,
-.release = easycap_release_noinode,
-.ioctl = easycap_ioctl_noinode,
-.poll = easycap_poll,
-.mmap = easycap_mmap,
+ .owner = THIS_MODULE,
+ .open = easycap_open_noinode,
+ .release = easycap_release_noinode,
+ .unlocked_ioctl = easycap_ioctl,
+ .poll = easycap_poll,
+ .mmap = easycap_mmap,
};
#endif /*EASYCAP_NEEDS_V4L2_FOPS*/
int video_device_many /*=0*/;
*/
/*--------------------------------------------------------------------------*/
const struct file_operations easysnd_fops = {
-.owner = THIS_MODULE,
-.open = easysnd_open,
-.release = easysnd_release,
-.ioctl = easysnd_ioctl,
-.read = easysnd_read,
-.llseek = no_llseek,
+ .owner = THIS_MODULE,
+ .open = easysnd_open,
+ .release = easysnd_release,
+ .unlocked_ioctl = easysnd_ioctl,
+ .read = easysnd_read,
+ .llseek = no_llseek,
};
struct usb_class_driver easysnd_class = {
.name = "usb/easysnd%d",
#include <linux/major.h>
#include <linux/delay.h>
#include <linux/hdreg.h>
+#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
blkvsc_req->cmnd[0] = READ_16;
}
- blkvsc_req->cmnd[1] |= blk_fua_rq(blkvsc_req->req) ? 0x8 : 0;
+ blkvsc_req->cmnd[1] |=
+ (blkvsc_req->req->cmd_flags & REQ_FUA) ? 0x8 : 0;
*(unsigned long long *)&blkvsc_req->cmnd[2] =
cpu_to_be64(blkvsc_req->sector_start);
blkvsc_req->cmnd[0] = READ_10;
}
- blkvsc_req->cmnd[1] |= blk_fua_rq(blkvsc_req->req) ? 0x8 : 0;
+ blkvsc_req->cmnd[1] |=
+ (blkvsc_req->req->cmd_flags & REQ_FUA) ? 0x8 : 0;
*(unsigned int *)&blkvsc_req->cmnd[2] =
cpu_to_be32(blkvsc_req->sector_start);
DPRINT_DBG(BLKVSC_DRV, "- req %p\n", req);
blkdev = req->rq_disk->private_data;
- if (blkdev->shutting_down || !blk_fs_request(req) ||
+ if (blkdev->shutting_down || req->cmd_type != REQ_TYPE_FS ||
blkdev->media_not_present) {
__blk_end_request_cur(req, 0);
continue;
DPRINT_DBG(BLKVSC_DRV, "- users %d disk %s\n", blkdev->users,
blkdev->gd->disk_name);
+ lock_kernel();
spin_lock(&blkdev->lock);
if (!blkdev->users && blkdev->device_type == DVD_TYPE) {
blkdev->users++;
spin_unlock(&blkdev->lock);
+ unlock_kernel();
return 0;
}
DPRINT_DBG(BLKVSC_DRV, "- users %d disk %s\n", blkdev->users,
blkdev->gd->disk_name);
+ lock_kernel();
spin_lock(&blkdev->lock);
if (blkdev->users == 1) {
spin_unlock(&blkdev->lock);
blkdev->users--;
spin_unlock(&blkdev->lock);
+ unlock_kernel();
return 0;
}
#
menuconfig LIRC_STAGING
bool "Linux Infrared Remote Control IR receiver/transmitter drivers"
+ depends on LIRC
help
Say Y here, and all supported Linux Infrared Remote Control IR and
RF receiver and transmitter drivers will be displayed. When paired
config LIRC_BT829
tristate "BT829 based hardware"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && PCI
help
Driver for the IR interface on BT829-based hardware
-config LIRC_ENE0100
- tristate "ENE KB3924/ENE0100 CIR Port Reciever"
- depends on LIRC_STAGING
- help
- This is a driver for CIR port handled by ENE KB3924 embedded
- controller found on some notebooks.
- It appears on PNP list as ENE0100.
-
config LIRC_I2C
tristate "I2C Based IR Receivers"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && I2C
help
Driver for I2C-based IR receivers, such as those commonly
found onboard Hauppauge PVR-150/250/350 video capture cards
config LIRC_IMON
tristate "Legacy SoundGraph iMON Receiver and Display"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && USB
help
Driver for the original SoundGraph iMON IR Receiver and Display
config LIRC_IT87
tristate "ITE IT87XX CIR Port Receiver"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && PNP
help
Driver for the ITE IT87xx IR Receiver
config LIRC_PARALLEL
tristate "Homebrew Parallel Port Receiver"
- depends on LIRC_STAGING && !SMP
+ depends on LIRC_STAGING && PARPORT && !SMP
help
Driver for Homebrew Parallel Port Receivers
config LIRC_SASEM
tristate "Sasem USB IR Remote"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && USB
help
Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module
help
Driver for the SIR IrDA port
-config LIRC_STREAMZAP
- tristate "Streamzap PC Receiver"
- depends on LIRC_STAGING
- help
- Driver for the Streamzap PC Receiver
-
config LIRC_TTUSBIR
tristate "Technotrend USB IR Receiver"
depends on LIRC_STAGING && USB
config LIRC_ZILOG
tristate "Zilog/Hauppauge IR Transmitter"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && I2C
help
Driver for the Zilog/Hauppauge IR Transmitter, found on
PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards
# Each configuration option enables a list of files.
obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o
-obj-$(CONFIG_LIRC_ENE0100) += lirc_ene0100.o
obj-$(CONFIG_LIRC_I2C) += lirc_i2c.o
obj-$(CONFIG_LIRC_IGORPLUGUSB) += lirc_igorplugusb.o
obj-$(CONFIG_LIRC_IMON) += lirc_imon.o
obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o
obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o
obj-$(CONFIG_LIRC_SIR) += lirc_sir.o
-obj-$(CONFIG_LIRC_STREAMZAP) += lirc_streamzap.o
obj-$(CONFIG_LIRC_TTUSBIR) += lirc_ttusbir.o
obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o
+++ /dev/null
-/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
- *
- * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include "lirc_ene0100.h"
-
-static int sample_period = 75;
-static int enable_idle = 1;
-static int enable_learning;
-
-static void ene_set_idle(struct ene_device *dev, int idle);
-static void ene_set_inputs(struct ene_device *dev, int enable);
-
-/* read a hardware register */
-static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
-{
- outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
- outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
- return inb(dev->hw_io + ENE_IO);
-}
-
-/* write a hardware register */
-static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
-{
- outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
- outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
- outb(value, dev->hw_io + ENE_IO);
-}
-
-/* change specific bits in hardware register */
-static void ene_hw_write_reg_mask(struct ene_device *dev,
- u16 reg, u8 value, u8 mask)
-{
- u8 regvalue;
-
- outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
- outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-
- regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
- regvalue |= (value & mask);
- outb(regvalue, dev->hw_io + ENE_IO);
-}
-
-/* read irq status and ack it */
-static int ene_hw_irq_status(struct ene_device *dev, int *buffer_pointer)
-{
- u8 irq_status;
- u8 fw_flags1, fw_flags2;
-
- fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
-
- if (buffer_pointer)
- *buffer_pointer = 4 * (fw_flags2 & ENE_FW2_BUF_HIGH);
-
- if (dev->hw_revision < ENE_HW_C) {
- irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
-
- if (!(irq_status & ENEB_IRQ_STATUS_IR))
- return 0;
- ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
- irq_status & ~ENEB_IRQ_STATUS_IR);
-
- /* rev B support only recieving */
- return ENE_IRQ_RX;
- }
-
- irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
-
- if (!(irq_status & ENEC_IRQ_STATUS))
- return 0;
-
- /* original driver does that twice - a workaround ? */
- ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
- ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
-
- /* clear unknown flag in F8F9 */
- if (fw_flags2 & ENE_FW2_IRQ_CLR)
- ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
-
- /* check if this is a TX interrupt */
- fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
-
- if (fw_flags1 & ENE_FW1_TXIRQ) {
- ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
- return ENE_IRQ_TX;
- } else
- return ENE_IRQ_RX;
-}
-
-static int ene_hw_detect(struct ene_device *dev)
-{
- u8 chip_major, chip_minor;
- u8 hw_revision, old_ver;
- u8 tmp;
- u8 fw_capabilities;
-
- tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
- ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
-
- chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
- chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
-
- ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
- hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
- old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
-
- if (hw_revision == 0xFF) {
-
- ene_printk(KERN_WARNING, "device seems to be disabled\n");
- ene_printk(KERN_WARNING,
- "send a mail to lirc-list@lists.sourceforge.net\n");
- ene_printk(KERN_WARNING, "please attach output of acpidump\n");
-
- return -ENODEV;
- }
-
- if (chip_major == 0x33) {
- ene_printk(KERN_WARNING, "chips 0x33xx aren't supported yet\n");
- return -ENODEV;
- }
-
- if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
- dev->hw_revision = ENE_HW_C;
- ene_printk(KERN_WARNING,
- "KB3926C detected, driver support is not complete!\n");
-
- } else if (old_ver == 0x24 && hw_revision == 0xC0) {
- dev->hw_revision = ENE_HW_B;
- ene_printk(KERN_NOTICE, "KB3926B detected\n");
- } else {
- dev->hw_revision = ENE_HW_D;
- ene_printk(KERN_WARNING,
- "unknown ENE chip detected, assuming KB3926D\n");
- ene_printk(KERN_WARNING, "driver support incomplete");
-
- }
-
- ene_printk(KERN_DEBUG, "chip is 0x%02x%02x - 0x%02x, 0x%02x\n",
- chip_major, chip_minor, old_ver, hw_revision);
-
-
- /* detect features hardware supports */
-
- if (dev->hw_revision < ENE_HW_C)
- return 0;
-
- fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
-
- dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
- dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
-
- dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
- fw_capabilities & ENE_FW2_FAN_AS_NRML_IN;
-
- ene_printk(KERN_NOTICE, "hardware features:\n");
- ene_printk(KERN_NOTICE,
- "learning and tx %s, gpio40_learn %s, fan_in %s\n",
- dev->hw_learning_and_tx_capable ? "on" : "off",
- dev->hw_gpio40_learning ? "on" : "off",
- dev->hw_fan_as_normal_input ? "on" : "off");
-
- if (!dev->hw_learning_and_tx_capable && enable_learning)
- enable_learning = 0;
-
- if (dev->hw_learning_and_tx_capable) {
- ene_printk(KERN_WARNING,
- "Device supports transmitting, but the driver doesn't\n");
- ene_printk(KERN_WARNING,
- "due to lack of hardware to test against.\n");
- ene_printk(KERN_WARNING,
- "Send a mail to: lirc-list@lists.sourceforge.net\n");
- }
- return 0;
-}
-
-/* hardware initialization */
-static int ene_hw_init(void *data)
-{
- u8 reg_value;
- struct ene_device *dev = (struct ene_device *)data;
- dev->in_use = 1;
-
- if (dev->hw_revision < ENE_HW_C) {
- ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
- ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
- } else {
- reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
- reg_value |= ENEC_IRQ_UNK_EN;
- reg_value &= ~ENEC_IRQ_STATUS;
- reg_value |= (dev->irq & ENEC_IRQ_MASK);
- ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
- ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
- }
-
- ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
- ene_set_inputs(dev, enable_learning);
-
- /* set sampling period */
- ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
-
- /* ack any pending irqs - just in case */
- ene_hw_irq_status(dev, NULL);
-
- /* enter idle mode */
- ene_set_idle(dev, 1);
-
- /* enable firmware bits */
- ene_hw_write_reg_mask(dev, ENE_FW1,
- ENE_FW1_ENABLE | ENE_FW1_IRQ,
- ENE_FW1_ENABLE | ENE_FW1_IRQ);
- /* clear stats */
- dev->sample = 0;
- return 0;
-}
-
-/* this enables gpio40 signal, used if connected to wide band input*/
-static void ene_enable_gpio40(struct ene_device *dev, int enable)
-{
- ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, enable ?
- 0 : ENE_CIR_CONF2_GPIO40DIS,
- ENE_CIR_CONF2_GPIO40DIS);
-}
-
-/* this enables the classic sampler */
-static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
-{
- ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_ADC_ON : 0);
-}
-
-/* this enables recieve via fan input */
-static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
-{
- if (!enable)
- ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
- else {
- ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
- ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
- }
- dev->fan_input_inuse = enable;
-}
-
-/* determine which input to use*/
-static void ene_set_inputs(struct ene_device *dev, int learning_enable)
-{
- ene_enable_normal_recieve(dev, 1);
-
- /* old hardware doesn't support learning mode for sure */
- if (dev->hw_revision <= ENE_HW_B)
- return;
-
- /* reciever not learning capable, still set gpio40 correctly */
- if (!dev->hw_learning_and_tx_capable) {
- ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
- return;
- }
-
- /* enable learning mode */
- if (learning_enable) {
- ene_enable_gpio40(dev, dev->hw_gpio40_learning);
-
- /* fan input is not used for learning */
- if (dev->hw_fan_as_normal_input)
- ene_enable_fan_recieve(dev, 0);
-
- /* disable learning mode */
- } else {
- if (dev->hw_fan_as_normal_input) {
- ene_enable_fan_recieve(dev, 1);
- ene_enable_normal_recieve(dev, 0);
- } else
- ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
- }
-
- /* set few additional settings for this mode */
- ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_enable ?
- ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
-
- ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_enable ?
- ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
-}
-
-/* deinitialization */
-static void ene_hw_deinit(void *data)
-{
- struct ene_device *dev = (struct ene_device *)data;
-
- /* disable samplers */
- ene_enable_normal_recieve(dev, 0);
-
- if (dev->hw_fan_as_normal_input)
- ene_enable_fan_recieve(dev, 0);
-
- /* disable hardware IRQ and firmware flag */
- ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
-
- ene_set_idle(dev, 1);
- dev->in_use = 0;
-}
-
-/* sends current sample to userspace */
-static void send_sample(struct ene_device *dev)
-{
- int value = abs(dev->sample) & PULSE_MASK;
-
- if (dev->sample > 0)
- value |= PULSE_BIT;
-
- if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
- lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&value);
- wake_up(&dev->lirc_driver->rbuf->wait_poll);
- }
- dev->sample = 0;
-}
-
-/* this updates current sample */
-static void update_sample(struct ene_device *dev, int sample)
-{
- if (!dev->sample)
- dev->sample = sample;
- else if (same_sign(dev->sample, sample))
- dev->sample += sample;
- else {
- send_sample(dev);
- dev->sample = sample;
- }
-}
-
-/* enable or disable idle mode */
-static void ene_set_idle(struct ene_device *dev, int idle)
-{
- struct timeval now;
- int disable = idle && enable_idle && (dev->hw_revision < ENE_HW_C);
-
- ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
- disable ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
- ENE_CIR_SAMPLE_OVERFLOW);
- dev->idle = idle;
-
- /* remember when we have entered the idle mode */
- if (idle) {
- do_gettimeofday(&dev->gap_start);
- return;
- }
-
- /* send the gap between keypresses now */
- do_gettimeofday(&now);
-
- if (now.tv_sec - dev->gap_start.tv_sec > 16)
- dev->sample = space(PULSE_MASK);
- else
- dev->sample = dev->sample +
- space(1000000ull * (now.tv_sec - dev->gap_start.tv_sec))
- + space(now.tv_usec - dev->gap_start.tv_usec);
-
- if (abs(dev->sample) > PULSE_MASK)
- dev->sample = space(PULSE_MASK);
- send_sample(dev);
-}
-
-/* interrupt handler */
-static irqreturn_t ene_hw_irq(int irq, void *data)
-{
- u16 hw_value;
- int i, hw_sample;
- int space;
- int buffer_pointer;
- int irq_status;
-
- struct ene_device *dev = (struct ene_device *)data;
- irq_status = ene_hw_irq_status(dev, &buffer_pointer);
-
- if (!irq_status)
- return IRQ_NONE;
-
- /* TODO: only RX for now */
- if (irq_status == ENE_IRQ_TX)
- return IRQ_HANDLED;
-
- for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
-
- hw_value = ene_hw_read_reg(dev,
- ENE_SAMPLE_BUFFER + buffer_pointer + i);
-
- if (dev->fan_input_inuse) {
- /* read high part of the sample */
- hw_value |= ene_hw_read_reg(dev,
- ENE_SAMPLE_BUFFER_FAN + buffer_pointer + i) << 8;
-
- /* test for _space_ bit */
- space = !(hw_value & ENE_FAN_SMPL_PULS_MSK);
-
- /* clear space bit, and other unused bits */
- hw_value &= ENE_FAN_VALUE_MASK;
- hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
-
- } else {
- space = hw_value & ENE_SAMPLE_SPC_MASK;
- hw_value &= ENE_SAMPLE_VALUE_MASK;
- hw_sample = hw_value * sample_period;
- }
-
- /* no more data */
- if (!(hw_value))
- break;
-
- if (space)
- hw_sample *= -1;
-
- /* overflow sample recieved, handle it */
-
- if (!dev->fan_input_inuse && hw_value == ENE_SAMPLE_OVERFLOW) {
-
- if (dev->idle)
- continue;
-
- if (dev->sample > 0 || abs(dev->sample) <= ENE_MAXGAP)
- update_sample(dev, hw_sample);
- else
- ene_set_idle(dev, 1);
-
- continue;
- }
-
- /* normal first sample recieved */
- if (!dev->fan_input_inuse && dev->idle) {
- ene_set_idle(dev, 0);
-
- /* discard first recieved value, its random
- since its the time signal was off before
- first pulse if idle mode is enabled, HW
- does that for us */
-
- if (!enable_idle)
- continue;
- }
- update_sample(dev, hw_sample);
- send_sample(dev);
- }
- return IRQ_HANDLED;
-}
-
-static int ene_probe(struct pnp_dev *pnp_dev,
- const struct pnp_device_id *dev_id)
-{
- struct ene_device *dev;
- struct lirc_driver *lirc_driver;
- int error = -ENOMEM;
-
- dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
-
- if (!dev)
- goto err1;
-
- dev->pnp_dev = pnp_dev;
- pnp_set_drvdata(pnp_dev, dev);
-
-
- /* prepare lirc interface */
- error = -ENOMEM;
- lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
-
- if (!lirc_driver)
- goto err2;
-
- dev->lirc_driver = lirc_driver;
-
- strcpy(lirc_driver->name, ENE_DRIVER_NAME);
- lirc_driver->minor = -1;
- lirc_driver->code_length = sizeof(int) * 8;
- lirc_driver->features = LIRC_CAN_REC_MODE2;
- lirc_driver->data = dev;
- lirc_driver->set_use_inc = ene_hw_init;
- lirc_driver->set_use_dec = ene_hw_deinit;
- lirc_driver->dev = &pnp_dev->dev;
- lirc_driver->owner = THIS_MODULE;
-
- lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-
- if (!lirc_driver->rbuf)
- goto err3;
-
- if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 256))
- goto err4;
-
- error = -ENODEV;
- if (lirc_register_driver(lirc_driver))
- goto err5;
-
- /* validate resources */
- if (!pnp_port_valid(pnp_dev, 0) ||
- pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
- goto err6;
-
- if (!pnp_irq_valid(pnp_dev, 0))
- goto err6;
-
- dev->hw_io = pnp_port_start(pnp_dev, 0);
- dev->irq = pnp_irq(pnp_dev, 0);
-
- /* claim the resources */
- error = -EBUSY;
- if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
- goto err6;
-
- if (request_irq(dev->irq, ene_hw_irq,
- IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
- goto err7;
-
- /* detect hardware version and features */
- error = ene_hw_detect(dev);
- if (error)
- goto err8;
-
- ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
- return 0;
-
-err8:
- free_irq(dev->irq, dev);
-err7:
- release_region(dev->hw_io, ENE_MAX_IO);
-err6:
- lirc_unregister_driver(lirc_driver->minor);
-err5:
- lirc_buffer_free(lirc_driver->rbuf);
-err4:
- kfree(lirc_driver->rbuf);
-err3:
- kfree(lirc_driver);
-err2:
- kfree(dev);
-err1:
- return error;
-}
-
-static void ene_remove(struct pnp_dev *pnp_dev)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- ene_hw_deinit(dev);
- free_irq(dev->irq, dev);
- release_region(dev->hw_io, ENE_MAX_IO);
- lirc_unregister_driver(dev->lirc_driver->minor);
- lirc_buffer_free(dev->lirc_driver->rbuf);
- kfree(dev->lirc_driver);
- kfree(dev);
-}
-
-#ifdef CONFIG_PM
-
-/* TODO: make 'wake on IR' configurable and add .shutdown */
-/* currently impossible due to lack of kernel support */
-
-static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- ene_hw_write_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, ENE_FW1_WAKE);
- return 0;
-}
-
-static int ene_resume(struct pnp_dev *pnp_dev)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- if (dev->in_use)
- ene_hw_init(dev);
-
- ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_WAKE);
- return 0;
-}
-
-#endif
-
-static const struct pnp_device_id ene_ids[] = {
- {.id = "ENE0100",},
- {},
-};
-
-static struct pnp_driver ene_driver = {
- .name = ENE_DRIVER_NAME,
- .id_table = ene_ids,
- .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
-
- .probe = ene_probe,
- .remove = __devexit_p(ene_remove),
-
-#ifdef CONFIG_PM
- .suspend = ene_suspend,
- .resume = ene_resume,
-#endif
-};
-
-static int __init ene_init(void)
-{
- if (sample_period < 5) {
- ene_printk(KERN_ERR, "sample period must be at\n");
- ene_printk(KERN_ERR, "least 5 us, (at least 30 recommended)\n");
- return -EINVAL;
- }
- return pnp_register_driver(&ene_driver);
-}
-
-static void ene_exit(void)
-{
- pnp_unregister_driver(&ene_driver);
-}
-
-module_param(sample_period, int, S_IRUGO);
-MODULE_PARM_DESC(sample_period, "Hardware sample period (75 us default)");
-
-module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(enable_idle,
- "Enables turning off signal sampling after long inactivity time; "
- "if disabled might help detecting input signal (default: enabled)");
-
-module_param(enable_learning, bool, S_IRUGO);
-MODULE_PARM_DESC(enable_learning, "Use wide band (learning) reciever");
-
-MODULE_DEVICE_TABLE(pnp, ene_ids);
-MODULE_DESCRIPTION
- ("LIRC driver for KB3926B/KB3926C/KB3926D (aka ENE0100) CIR port");
-MODULE_AUTHOR("Maxim Levitsky");
-MODULE_LICENSE("GPL");
-
-module_init(ene_init);
-module_exit(ene_exit);
static DEFINE_SPINLOCK(hardware_lock);
static DEFINE_SPINLOCK(dev_lock);
+static bool device_open;
static int rx_buf[RBUF_LEN];
unsigned int rx_tail, rx_head;
static int lirc_open(struct inode *inode, struct file *file)
{
spin_lock(&dev_lock);
- if (module_refcount(THIS_MODULE)) {
+ if (device_open) {
spin_unlock(&dev_lock);
return -EBUSY;
}
+ device_open = true;
spin_unlock(&dev_lock);
return 0;
}
static int lirc_close(struct inode *inode, struct file *file)
{
+ spin_lock(&dev_lock);
+ device_open = false;
+ spin_unlock(&dev_lock);
return 0;
}
};
-#ifdef MODULE
static int init_chrdev(void)
{
driver.minor = lirc_register_driver(&driver);
{
lirc_unregister_driver(driver.minor);
}
-#endif
/* SECTION: Hardware */
unsigned int level, newlevel;
unsigned int timeout;
- if (!module_refcount(THIS_MODULE))
+ if (!is_open)
return;
if (!is_claimed)
static int lirc_open(struct inode *node, struct file *filep)
{
- if (module_refcount(THIS_MODULE) || !lirc_claim())
+ if (is_open || !lirc_claim())
return -EBUSY;
parport_enable_irq(pport);
+++ /dev/null
-/*
- * Streamzap Remote Control driver
- *
- * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
- *
- * This driver was based on the work of Greg Wickham and Adrian
- * Dewhurst. It was substantially rewritten to support correct signal
- * gaps and now maintains a delay buffer, which is used to present
- * consistent timing behaviour to user space applications. Without the
- * delay buffer an ugly hack would be required in lircd, which can
- * cause sluggish signal decoding in certain situations.
- *
- * This driver is based on the USB skeleton driver packaged with the
- * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
-
-#define DRIVER_VERSION "1.28"
-#define DRIVER_NAME "lirc_streamzap"
-#define DRIVER_DESC "Streamzap Remote Control driver"
-
-static int debug;
-
-#define USB_STREAMZAP_VENDOR_ID 0x0e9c
-#define USB_STREAMZAP_PRODUCT_ID 0x0000
-
-/* Use our own dbg macro */
-#define dprintk(fmt, args...) \
- do { \
- if (debug) \
- printk(KERN_DEBUG DRIVER_NAME "[%d]: " \
- fmt "\n", ## args); \
- } while (0)
-
-/* table of devices that work with this driver */
-static struct usb_device_id streamzap_table[] = {
- /* Streamzap Remote Control */
- { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
- /* Terminating entry */
- { }
-};
-
-MODULE_DEVICE_TABLE(usb, streamzap_table);
-
-#define STREAMZAP_PULSE_MASK 0xf0
-#define STREAMZAP_SPACE_MASK 0x0f
-#define STREAMZAP_TIMEOUT 0xff
-#define STREAMZAP_RESOLUTION 256
-
-/* number of samples buffered */
-#define STREAMZAP_BUF_LEN 128
-
-enum StreamzapDecoderState {
- PulseSpace,
- FullPulse,
- FullSpace,
- IgnorePulse
-};
-
-/* Structure to hold all of our device specific stuff
- *
- * some remarks regarding locking:
- * theoretically this struct can be accessed from three threads:
- *
- * - from lirc_dev through set_use_inc/set_use_dec
- *
- * - from the USB layer throuh probe/disconnect/irq
- *
- * Careful placement of lirc_register_driver/lirc_unregister_driver
- * calls will prevent conflicts. lirc_dev makes sure that
- * set_use_inc/set_use_dec are not being executed and will not be
- * called after lirc_unregister_driver returns.
- *
- * - by the timer callback
- *
- * The timer is only running when the device is connected and the
- * LIRC device is open. Making sure the timer is deleted by
- * set_use_dec will make conflicts impossible.
- */
-struct usb_streamzap {
-
- /* usb */
- /* save off the usb device pointer */
- struct usb_device *udev;
- /* the interface for this device */
- struct usb_interface *interface;
-
- /* buffer & dma */
- unsigned char *buf_in;
- dma_addr_t dma_in;
- unsigned int buf_in_len;
-
- struct usb_endpoint_descriptor *endpoint;
-
- /* IRQ */
- struct urb *urb_in;
-
- /* lirc */
- struct lirc_driver *driver;
- struct lirc_buffer *delay_buf;
-
- /* timer used to support delay buffering */
- struct timer_list delay_timer;
- int timer_running;
- spinlock_t timer_lock;
-
- /* tracks whether we are currently receiving some signal */
- int idle;
- /* sum of signal lengths received since signal start */
- unsigned long sum;
- /* start time of signal; necessary for gap tracking */
- struct timeval signal_last;
- struct timeval signal_start;
- enum StreamzapDecoderState decoder_state;
- struct timer_list flush_timer;
- int flush;
- int in_use;
- int timeout_enabled;
-};
-
-
-/* local function prototypes */
-static int streamzap_probe(struct usb_interface *interface,
- const struct usb_device_id *id);
-static void streamzap_disconnect(struct usb_interface *interface);
-static void usb_streamzap_irq(struct urb *urb);
-static int streamzap_use_inc(void *data);
-static void streamzap_use_dec(void *data);
-static long streamzap_ioctl(struct file *filep, unsigned int cmd,
- unsigned long arg);
-static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
-static int streamzap_resume(struct usb_interface *intf);
-
-/* usb specific object needed to register this driver with the usb subsystem */
-
-static struct usb_driver streamzap_driver = {
- .name = DRIVER_NAME,
- .probe = streamzap_probe,
- .disconnect = streamzap_disconnect,
- .suspend = streamzap_suspend,
- .resume = streamzap_resume,
- .id_table = streamzap_table,
-};
-
-static void stop_timer(struct usb_streamzap *sz)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&sz->timer_lock, flags);
- if (sz->timer_running) {
- sz->timer_running = 0;
- spin_unlock_irqrestore(&sz->timer_lock, flags);
- del_timer_sync(&sz->delay_timer);
- } else {
- spin_unlock_irqrestore(&sz->timer_lock, flags);
- }
-}
-
-static void flush_timeout(unsigned long arg)
-{
- struct usb_streamzap *sz = (struct usb_streamzap *) arg;
-
- /* finally start accepting data */
- sz->flush = 0;
-}
-static void delay_timeout(unsigned long arg)
-{
- unsigned long flags;
- /* deliver data every 10 ms */
- static unsigned long timer_inc =
- (10000/(1000000/HZ)) == 0 ? 1 : (10000/(1000000/HZ));
- struct usb_streamzap *sz = (struct usb_streamzap *) arg;
- int data;
-
- spin_lock_irqsave(&sz->timer_lock, flags);
-
- if (!lirc_buffer_empty(sz->delay_buf) &&
- !lirc_buffer_full(sz->driver->rbuf)) {
- lirc_buffer_read(sz->delay_buf, (unsigned char *) &data);
- lirc_buffer_write(sz->driver->rbuf, (unsigned char *) &data);
- }
- if (!lirc_buffer_empty(sz->delay_buf)) {
- while (lirc_buffer_available(sz->delay_buf) <
- STREAMZAP_BUF_LEN / 2 &&
- !lirc_buffer_full(sz->driver->rbuf)) {
- lirc_buffer_read(sz->delay_buf,
- (unsigned char *) &data);
- lirc_buffer_write(sz->driver->rbuf,
- (unsigned char *) &data);
- }
- if (sz->timer_running) {
- sz->delay_timer.expires = jiffies + timer_inc;
- add_timer(&sz->delay_timer);
- }
- } else {
- sz->timer_running = 0;
- }
-
- if (!lirc_buffer_empty(sz->driver->rbuf))
- wake_up(&sz->driver->rbuf->wait_poll);
-
- spin_unlock_irqrestore(&sz->timer_lock, flags);
-}
-
-static void flush_delay_buffer(struct usb_streamzap *sz)
-{
- int data;
- int empty = 1;
-
- while (!lirc_buffer_empty(sz->delay_buf)) {
- empty = 0;
- lirc_buffer_read(sz->delay_buf, (unsigned char *) &data);
- if (!lirc_buffer_full(sz->driver->rbuf)) {
- lirc_buffer_write(sz->driver->rbuf,
- (unsigned char *) &data);
- } else {
- dprintk("buffer overflow", sz->driver->minor);
- }
- }
- if (!empty)
- wake_up(&sz->driver->rbuf->wait_poll);
-}
-
-static void push(struct usb_streamzap *sz, unsigned char *data)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&sz->timer_lock, flags);
- if (lirc_buffer_full(sz->delay_buf)) {
- int read_data;
-
- lirc_buffer_read(sz->delay_buf,
- (unsigned char *) &read_data);
- if (!lirc_buffer_full(sz->driver->rbuf)) {
- lirc_buffer_write(sz->driver->rbuf,
- (unsigned char *) &read_data);
- } else {
- dprintk("buffer overflow", sz->driver->minor);
- }
- }
-
- lirc_buffer_write(sz->delay_buf, data);
-
- if (!sz->timer_running) {
- sz->delay_timer.expires = jiffies + HZ/10;
- add_timer(&sz->delay_timer);
- sz->timer_running = 1;
- }
-
- spin_unlock_irqrestore(&sz->timer_lock, flags);
-}
-
-static void push_full_pulse(struct usb_streamzap *sz,
- unsigned char value)
-{
- int pulse;
-
- if (sz->idle) {
- long deltv;
- int tmp;
-
- sz->signal_last = sz->signal_start;
- do_gettimeofday(&sz->signal_start);
-
- deltv = sz->signal_start.tv_sec-sz->signal_last.tv_sec;
- if (deltv > 15) {
- /* really long time */
- tmp = LIRC_SPACE(LIRC_VALUE_MASK);
- } else {
- tmp = (int) (deltv*1000000+
- sz->signal_start.tv_usec -
- sz->signal_last.tv_usec);
- tmp -= sz->sum;
- tmp = LIRC_SPACE(tmp);
- }
- dprintk("ls %u", sz->driver->minor, tmp);
- push(sz, (char *)&tmp);
-
- sz->idle = 0;
- sz->sum = 0;
- }
-
- pulse = ((int) value) * STREAMZAP_RESOLUTION;
- pulse += STREAMZAP_RESOLUTION / 2;
- sz->sum += pulse;
- pulse = LIRC_PULSE(pulse);
-
- dprintk("p %u", sz->driver->minor, pulse & PULSE_MASK);
- push(sz, (char *)&pulse);
-}
-
-static void push_half_pulse(struct usb_streamzap *sz,
- unsigned char value)
-{
- push_full_pulse(sz, (value & STREAMZAP_PULSE_MASK)>>4);
-}
-
-static void push_full_space(struct usb_streamzap *sz,
- unsigned char value)
-{
- int space;
-
- space = ((int) value)*STREAMZAP_RESOLUTION;
- space += STREAMZAP_RESOLUTION/2;
- sz->sum += space;
- space = LIRC_SPACE(space);
- dprintk("s %u", sz->driver->minor, space);
- push(sz, (char *)&space);
-}
-
-static void push_half_space(struct usb_streamzap *sz,
- unsigned char value)
-{
- push_full_space(sz, value & STREAMZAP_SPACE_MASK);
-}
-
-/**
- * usb_streamzap_irq - IRQ handler
- *
- * This procedure is invoked on reception of data from
- * the usb remote.
- */
-static void usb_streamzap_irq(struct urb *urb)
-{
- struct usb_streamzap *sz;
- int len;
- unsigned int i = 0;
-
- if (!urb)
- return;
-
- sz = urb->context;
- len = urb->actual_length;
-
- switch (urb->status) {
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /*
- * this urb is terminated, clean up.
- * sz might already be invalid at this point
- */
- dprintk("urb status: %d", -1, urb->status);
- return;
- default:
- break;
- }
-
- dprintk("received %d", sz->driver->minor, urb->actual_length);
- if (!sz->flush) {
- for (i = 0; i < urb->actual_length; i++) {
- dprintk("%d: %x", sz->driver->minor,
- i, (unsigned char) sz->buf_in[i]);
- switch (sz->decoder_state) {
- case PulseSpace:
- if ((sz->buf_in[i]&STREAMZAP_PULSE_MASK) ==
- STREAMZAP_PULSE_MASK) {
- sz->decoder_state = FullPulse;
- continue;
- } else if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK)
- == STREAMZAP_SPACE_MASK) {
- push_half_pulse(sz, sz->buf_in[i]);
- sz->decoder_state = FullSpace;
- continue;
- } else {
- push_half_pulse(sz, sz->buf_in[i]);
- push_half_space(sz, sz->buf_in[i]);
- }
- break;
- case FullPulse:
- push_full_pulse(sz, sz->buf_in[i]);
- sz->decoder_state = IgnorePulse;
- break;
- case FullSpace:
- if (sz->buf_in[i] == STREAMZAP_TIMEOUT) {
- sz->idle = 1;
- stop_timer(sz);
- if (sz->timeout_enabled) {
- int timeout =
- LIRC_TIMEOUT
- (STREAMZAP_TIMEOUT *
- STREAMZAP_RESOLUTION);
- push(sz, (char *)&timeout);
- }
- flush_delay_buffer(sz);
- } else
- push_full_space(sz, sz->buf_in[i]);
- sz->decoder_state = PulseSpace;
- break;
- case IgnorePulse:
- if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK) ==
- STREAMZAP_SPACE_MASK) {
- sz->decoder_state = FullSpace;
- continue;
- }
- push_half_space(sz, sz->buf_in[i]);
- sz->decoder_state = PulseSpace;
- break;
- }
- }
- }
-
- usb_submit_urb(urb, GFP_ATOMIC);
-
- return;
-}
-
-static const struct file_operations streamzap_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = streamzap_ioctl,
- .read = lirc_dev_fop_read,
- .write = lirc_dev_fop_write,
- .poll = lirc_dev_fop_poll,
- .open = lirc_dev_fop_open,
- .release = lirc_dev_fop_close,
-};
-
-
-/**
- * streamzap_probe
- *
- * Called by usb-core to associated with a candidate device
- * On any failure the return value is the ERROR
- * On success return 0
- */
-static int streamzap_probe(struct usb_interface *interface,
- const struct usb_device_id *id)
-{
- struct usb_device *udev = interface_to_usbdev(interface);
- struct usb_host_interface *iface_host;
- struct usb_streamzap *sz;
- struct lirc_driver *driver;
- struct lirc_buffer *lirc_buf;
- struct lirc_buffer *delay_buf;
- char buf[63], name[128] = "";
- int retval = -ENOMEM;
- int minor = 0;
-
- /* Allocate space for device driver specific data */
- sz = kzalloc(sizeof(struct usb_streamzap), GFP_KERNEL);
- if (sz == NULL)
- return -ENOMEM;
-
- sz->udev = udev;
- sz->interface = interface;
-
- /* Check to ensure endpoint information matches requirements */
- iface_host = interface->cur_altsetting;
-
- if (iface_host->desc.bNumEndpoints != 1) {
- err("%s: Unexpected desc.bNumEndpoints (%d)", __func__,
- iface_host->desc.bNumEndpoints);
- retval = -ENODEV;
- goto free_sz;
- }
-
- sz->endpoint = &(iface_host->endpoint[0].desc);
- if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
- != USB_DIR_IN) {
- err("%s: endpoint doesn't match input device 02%02x",
- __func__, sz->endpoint->bEndpointAddress);
- retval = -ENODEV;
- goto free_sz;
- }
-
- if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- != USB_ENDPOINT_XFER_INT) {
- err("%s: endpoint attributes don't match xfer 02%02x",
- __func__, sz->endpoint->bmAttributes);
- retval = -ENODEV;
- goto free_sz;
- }
-
- if (sz->endpoint->wMaxPacketSize == 0) {
- err("%s: endpoint message size==0? ", __func__);
- retval = -ENODEV;
- goto free_sz;
- }
-
- /* Allocate the USB buffer and IRQ URB */
-
- sz->buf_in_len = sz->endpoint->wMaxPacketSize;
- sz->buf_in = usb_alloc_coherent(sz->udev, sz->buf_in_len,
- GFP_ATOMIC, &sz->dma_in);
- if (sz->buf_in == NULL)
- goto free_sz;
-
- sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
- if (sz->urb_in == NULL)
- goto free_sz;
-
- /* Connect this device to the LIRC sub-system */
- driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
- if (!driver)
- goto free_sz;
-
- lirc_buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
- if (!lirc_buf)
- goto free_driver;
- if (lirc_buffer_init(lirc_buf, sizeof(int), STREAMZAP_BUF_LEN))
- goto kfree_lirc_buf;
-
- delay_buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
- if (!delay_buf)
- goto free_lirc_buf;
- if (lirc_buffer_init(delay_buf, sizeof(int), STREAMZAP_BUF_LEN))
- goto kfree_delay_buf;
-
- sz->driver = driver;
- strcpy(sz->driver->name, DRIVER_NAME);
- sz->driver->minor = -1;
- sz->driver->sample_rate = 0;
- sz->driver->code_length = sizeof(int) * 8;
- sz->driver->features = LIRC_CAN_REC_MODE2 |
- LIRC_CAN_GET_REC_RESOLUTION |
- LIRC_CAN_SET_REC_TIMEOUT;
- sz->driver->data = sz;
- sz->driver->min_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION;
- sz->driver->max_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION;
- sz->driver->rbuf = lirc_buf;
- sz->delay_buf = delay_buf;
- sz->driver->set_use_inc = &streamzap_use_inc;
- sz->driver->set_use_dec = &streamzap_use_dec;
- sz->driver->fops = &streamzap_fops;
- sz->driver->dev = &interface->dev;
- sz->driver->owner = THIS_MODULE;
-
- sz->idle = 1;
- sz->decoder_state = PulseSpace;
- init_timer(&sz->delay_timer);
- sz->delay_timer.function = delay_timeout;
- sz->delay_timer.data = (unsigned long) sz;
- sz->timer_running = 0;
- spin_lock_init(&sz->timer_lock);
-
- init_timer(&sz->flush_timer);
- sz->flush_timer.function = flush_timeout;
- sz->flush_timer.data = (unsigned long) sz;
- /* Complete final initialisations */
-
- usb_fill_int_urb(sz->urb_in, udev,
- usb_rcvintpipe(udev, sz->endpoint->bEndpointAddress),
- sz->buf_in, sz->buf_in_len, usb_streamzap_irq, sz,
- sz->endpoint->bInterval);
- sz->urb_in->transfer_dma = sz->dma_in;
- sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- if (udev->descriptor.iManufacturer
- && usb_string(udev, udev->descriptor.iManufacturer,
- buf, sizeof(buf)) > 0)
- strlcpy(name, buf, sizeof(name));
-
- if (udev->descriptor.iProduct
- && usb_string(udev, udev->descriptor.iProduct,
- buf, sizeof(buf)) > 0)
- snprintf(name + strlen(name), sizeof(name) - strlen(name),
- " %s", buf);
-
- minor = lirc_register_driver(driver);
-
- if (minor < 0)
- goto free_delay_buf;
-
- sz->driver->minor = minor;
-
- usb_set_intfdata(interface, sz);
-
- printk(KERN_INFO DRIVER_NAME "[%d]: %s on usb%d:%d attached\n",
- sz->driver->minor, name,
- udev->bus->busnum, sz->udev->devnum);
-
- return 0;
-
-free_delay_buf:
- lirc_buffer_free(sz->delay_buf);
-kfree_delay_buf:
- kfree(delay_buf);
-free_lirc_buf:
- lirc_buffer_free(sz->driver->rbuf);
-kfree_lirc_buf:
- kfree(lirc_buf);
-free_driver:
- kfree(driver);
-free_sz:
- if (retval == -ENOMEM)
- err("Out of memory");
-
- if (sz) {
- usb_free_urb(sz->urb_in);
- usb_free_coherent(udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
- kfree(sz);
- }
-
- return retval;
-}
-
-static int streamzap_use_inc(void *data)
-{
- struct usb_streamzap *sz = data;
-
- if (!sz) {
- dprintk("%s called with no context", -1, __func__);
- return -EINVAL;
- }
- dprintk("set use inc", sz->driver->minor);
-
- lirc_buffer_clear(sz->driver->rbuf);
- lirc_buffer_clear(sz->delay_buf);
-
- sz->flush_timer.expires = jiffies + HZ;
- sz->flush = 1;
- add_timer(&sz->flush_timer);
-
- sz->urb_in->dev = sz->udev;
- if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
- dprintk("open result = -EIO error submitting urb",
- sz->driver->minor);
- return -EIO;
- }
- sz->in_use++;
-
- return 0;
-}
-
-static void streamzap_use_dec(void *data)
-{
- struct usb_streamzap *sz = data;
-
- if (!sz) {
- dprintk("%s called with no context", -1, __func__);
- return;
- }
- dprintk("set use dec", sz->driver->minor);
-
- if (sz->flush) {
- sz->flush = 0;
- del_timer_sync(&sz->flush_timer);
- }
-
- usb_kill_urb(sz->urb_in);
-
- stop_timer(sz);
-
- sz->in_use--;
-}
-
-static long streamzap_ioctl(struct file *filep, unsigned int cmd,
- unsigned long arg)
-{
- int result = 0;
- int val;
- struct usb_streamzap *sz = lirc_get_pdata(filep);
-
- switch (cmd) {
- case LIRC_GET_REC_RESOLUTION:
- result = put_user(STREAMZAP_RESOLUTION, (unsigned int *) arg);
- break;
- case LIRC_SET_REC_TIMEOUT:
- result = get_user(val, (int *)arg);
- if (result == 0) {
- if (val == STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION)
- sz->timeout_enabled = 1;
- else if (val == 0)
- sz->timeout_enabled = 0;
- else
- result = -EINVAL;
- }
- break;
- default:
- return lirc_dev_fop_ioctl(filep, cmd, arg);
- }
- return result;
-}
-
-/**
- * streamzap_disconnect
- *
- * Called by the usb core when the device is removed from the system.
- *
- * This routine guarantees that the driver will not submit any more urbs
- * by clearing dev->udev. It is also supposed to terminate any currently
- * active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(),
- * does not provide any way to do this.
- */
-static void streamzap_disconnect(struct usb_interface *interface)
-{
- struct usb_streamzap *sz;
- int errnum;
- int minor;
-
- sz = usb_get_intfdata(interface);
-
- /* unregister from the LIRC sub-system */
-
- errnum = lirc_unregister_driver(sz->driver->minor);
- if (errnum != 0)
- dprintk("error in lirc_unregister: (returned %d)",
- sz->driver->minor, errnum);
-
- lirc_buffer_free(sz->delay_buf);
- lirc_buffer_free(sz->driver->rbuf);
-
- /* unregister from the USB sub-system */
-
- usb_free_urb(sz->urb_in);
-
- usb_free_coherent(sz->udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
-
- minor = sz->driver->minor;
- kfree(sz->driver->rbuf);
- kfree(sz->driver);
- kfree(sz->delay_buf);
- kfree(sz);
-
- printk(KERN_INFO DRIVER_NAME "[%d]: disconnected\n", minor);
-}
-
-static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
-{
- struct usb_streamzap *sz = usb_get_intfdata(intf);
-
- printk(KERN_INFO DRIVER_NAME "[%d]: suspend\n", sz->driver->minor);
- if (sz->in_use) {
- if (sz->flush) {
- sz->flush = 0;
- del_timer_sync(&sz->flush_timer);
- }
-
- stop_timer(sz);
-
- usb_kill_urb(sz->urb_in);
- }
- return 0;
-}
-
-static int streamzap_resume(struct usb_interface *intf)
-{
- struct usb_streamzap *sz = usb_get_intfdata(intf);
-
- lirc_buffer_clear(sz->driver->rbuf);
- lirc_buffer_clear(sz->delay_buf);
-
- if (sz->in_use) {
- sz->flush_timer.expires = jiffies + HZ;
- sz->flush = 1;
- add_timer(&sz->flush_timer);
-
- sz->urb_in->dev = sz->udev;
- if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
- dprintk("open result = -EIO error submitting urb",
- sz->driver->minor);
- return -EIO;
- }
- }
- return 0;
-}
-
-/**
- * usb_streamzap_init
- */
-static int __init usb_streamzap_init(void)
-{
- int result;
-
- /* register this driver with the USB subsystem */
- result = usb_register(&streamzap_driver);
-
- if (result) {
- err("usb_register failed. Error number %d",
- result);
- return result;
- }
-
- printk(KERN_INFO DRIVER_NAME " " DRIVER_VERSION " registered\n");
- return 0;
-}
-
-/**
- * usb_streamzap_exit
- */
-static void __exit usb_streamzap_exit(void)
-{
- usb_deregister(&streamzap_driver);
-}
-
-
-module_init(usb_streamzap_init);
-module_exit(usb_streamzap_exit);
-
-MODULE_AUTHOR("Christoph Bartelmus, Greg Wickham, Adrian Dewhurst");
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging messages");
goto err_out_exit;
}
- err = inode_setattr(inode, attr);
- if (err) {
- dprintk("%s: ino: %llu, failed to set the attributes.\n", __func__, POHMELFS_I(inode)->ino);
- goto err_out_exit;
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ err = vmtruncate(inode, attr->ia_size);
+ if (err) {
+ dprintk("%s: ino: %llu, failed to set the attributes.\n", __func__, POHMELFS_I(inode)->ino);
+ goto err_out_exit;
+ }
}
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
dprintk("%s: ino: %llu, mode: %o -> %o, uid: %u -> %u, gid: %u -> %u, size: %llu -> %llu.\n",
__func__, POHMELFS_I(inode)->ino, inode->i_mode, attr->ia_mode,
inode->i_uid, attr->ia_uid, inode->i_gid, attr->ia_gid, inode->i_size, attr->ia_size);
}
}
-static void pohmelfs_drop_inode(struct inode *inode)
+static int pohmelfs_drop_inode(struct inode *inode)
{
struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
struct pohmelfs_inode *pi = POHMELFS_I(inode);
list_del_init(&pi->inode_entry);
spin_unlock(&psb->ino_lock);
- generic_drop_inode(inode);
+ return generic_drop_inode(inode);
}
static struct pohmelfs_inode *pohmelfs_get_inode_from_list(struct pohmelfs_sb *psb,
return -ENOENT;
}
- read_lock(¤t->fs->lock);
+ spin_lock(¤t->fs->lock);
path.mnt = mntget(current->fs->root.mnt);
- read_unlock(¤t->fs->lock);
+ spin_unlock(¤t->fs->lock);
path.dentry = d;
return -ENOENT;
}
- read_lock(¤t->fs->lock);
+ spin_lock(¤t->fs->lock);
root = dget(current->fs->root.dentry);
- read_unlock(¤t->fs->lock);
+ spin_unlock(¤t->fs->lock);
spin_lock(&dcache_lock);
};
-static char *ifname = "wlan%d";
+static char ifname[IFNAMSIZ] = "wlan%d";
static int hwseqnum = 0;
static int hwwep = 0;
static int channels = 0x3fff;
MODULE_DESCRIPTION("Linux driver for Realtek RTL8180 / RTL8185 WiFi cards");
-module_param(ifname, charp, S_IRUGO|S_IWUSR);
+module_param_string(ifname, ifname, sizeof(ifname), S_IRUGO|S_IWUSR);
module_param(hwseqnum, int, S_IRUGO|S_IWUSR);
module_param(hwwep, int, S_IRUGO|S_IWUSR);
module_param(channels, int, S_IRUGO|S_IWUSR);
if (dev_alloc_name(dev, ifname) < 0) {
DMESG("Oops: devname already taken! Trying wlan%%d...\n");
- ifname = "wlan%d";
+ strcpy(ifname, "wlan%d");
dev_alloc_name(dev, ifname);
}
{}
};
-static char* ifname = "wlan%d";
+static char ifname[IFNAMSIZ] = "wlan%d";
static int hwwep = 1; //default use hw. set 0 to use software security
static int channels = 0x3fff;
MODULE_DESCRIPTION("Linux driver for Realtek RTL819x WiFi cards");
-module_param(ifname, charp, S_IRUGO|S_IWUSR );
+module_param_string(ifname, ifname, sizeof(ifname), S_IRUGO|S_IWUSR);
//module_param(hwseqnum,int, S_IRUGO|S_IWUSR);
module_param(hwwep,int, S_IRUGO|S_IWUSR);
module_param(channels,int, S_IRUGO|S_IWUSR);
if (dev_alloc_name(dev, ifname) < 0){
RT_TRACE(COMP_INIT, "Oops: devname already taken! Trying wlan%%d...\n");
- ifname = "wlan%d";
+ strcpy(ifname, "wlan%d");
dev_alloc_name(dev, ifname);
}
MODULE_DEVICE_TABLE(usb, rtl8192_usb_id_tbl);
MODULE_DESCRIPTION("Linux driver for Realtek RTL8192 USB WiFi cards");
-static char* ifname = "wlan%d";
+static char ifname[IFNAMSIZ] = "wlan%d";
static int hwwep = 1; //default use hw. set 0 to use software security
static int channels = 0x3fff;
-module_param(ifname, charp, S_IRUGO|S_IWUSR );
+module_param_string(ifname, ifname, sizeof(ifname), S_IRUGO|S_IWUSR);
//module_param(hwseqnum,int, S_IRUGO|S_IWUSR);
module_param(hwwep,int, S_IRUGO|S_IWUSR);
module_param(channels,int, S_IRUGO|S_IWUSR);
if (dev_alloc_name(dev, ifname) < 0){
RT_TRACE(COMP_INIT, "Oops: devname already taken! Trying wlan%%d...\n");
- ifname = "wlan%d";
+ strcpy(ifname, "wlan%d");
dev_alloc_name(dev, ifname);
}
vhci = hcd_to_vhci(hcd);
spin_lock_irqsave(&vhci->lock, flags);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
usbip_dbg_vhci_rh("hw accessible flag in on?\n");
goto done;
}
u32 prev_port_status[VHCI_NPORTS];
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
return -ETIMEDOUT;
/*
dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
spin_lock_irq(&vhci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
rc = -ESHUTDOWN;
} else {
/* vhci->rh_state = DUMMY_RH_RUNNING;
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-y += early/
+obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
}
static int cxacru_start_wait_urb(struct urb *urb, struct completion *done,
- int* actual_length)
+ int *actual_length)
{
struct timer_list timer;
put_unaligned(cpu_to_le32(addr), (__le32 *)(buf + offb));
offb += 4;
addr += l;
- if(l)
+ if (l)
memcpy(buf + offb, data + offd, l);
if (l < stride)
memset(buf + offb + l, 0, stride - l);
}
offb = 0;
}
- } while(offd < size);
+ } while (offd < size);
dbg("sent fw %#x", fw);
ret = 0;
if (instance->modem_type->boot_rom_patch) {
val = cpu_to_le32(BR_ADDR);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4);
- }
- else {
+ } else {
ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0);
}
if (ret) {
}
static int cxacru_find_firmware(struct cxacru_data *instance,
- char* phase, const struct firmware **fw_p)
+ char *phase, const struct firmware **fw_p)
{
struct usbatm_data *usbatm = instance->usbatm;
struct device *dev = &usbatm->usb_intf->dev;
.id_table = speedtch_usb_ids
};
-static void speedtch_release_interfaces(struct usb_device *usb_dev, int num_interfaces) {
+static void speedtch_release_interfaces(struct usb_device *usb_dev,
+ int num_interfaces)
+{
struct usb_interface *cur_intf;
int i;
- for(i = 0; i < num_interfaces; i++)
+ for (i = 0; i < num_interfaces; i++)
if ((cur_intf = usb_ifnum_to_if(usb_dev, i))) {
usb_set_intfdata(cur_intf, NULL);
usb_driver_release_interface(&speedtch_usb_driver, cur_intf);
/* claim all interfaces */
- for (i=0; i < num_interfaces; i++) {
+ for (i = 0; i < num_interfaces; i++) {
cur_intf = usb_ifnum_to_if(usb_dev, i);
if ((i != ifnum) && cur_intf) {
use_isoc = 0; /* fall back to bulk if endpoint not found */
- for (i=0; i<desc->desc.bNumEndpoints; i++) {
+ for (i = 0; i < desc->desc.bNumEndpoints; i++) {
const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
if ((endpoint_desc->bEndpointAddress == target_address)) {
#include <linux/mutex.h>
#include <linux/freezer.h>
#include <linux/slab.h>
+#include <linux/kernel.h>
#include <asm/unaligned.h>
char file_arr[] = "CMVxy.bin";
char *file;
+ kparam_block_sysfs_write(cmv_file);
/* set proper name corresponding modem version and line type */
if (cmv_file[sc->modem_index] == NULL) {
if (UEA_CHIP_VERSION(sc) == ADI930)
strlcat(cmv_name, file, UEA_FW_NAME_MAX);
if (ver == 2)
strlcat(cmv_name, ".v2", UEA_FW_NAME_MAX);
+ kparam_unblock_sysfs_write(cmv_file);
}
static int request_cmvs_old(struct uea_softc *sc,
/* Retrieve the device End System Identifier (MAC) */
-#define htoi(x) (isdigit(x) ? x-'0' : toupper(x)-'A'+10)
static int uea_getesi(struct uea_softc *sc, u_char * esi)
{
unsigned char mac_str[2 * ETH_ALEN + 1];
return 1;
for (i = 0; i < ETH_ALEN; i++)
- esi[i] = htoi(mac_str[2 * i]) * 16 + htoi(mac_str[2 * i + 1]);
+ esi[i] = hex_to_bin(mac_str[2 * i]) * 16 +
+ hex_to_bin(mac_str[2 * i + 1]);
return 0;
}
#ifdef VERBOSE_DEBUG
static int usbatm_print_packet(const unsigned char *data, int len);
-#define PACKETDEBUG(arg...) usbatm_print_packet (arg)
-#define vdbg(arg...) dbg (arg)
+#define PACKETDEBUG(arg...) usbatm_print_packet(arg)
+#define vdbg(arg...) dbg(arg)
#else
#define PACKETDEBUG(arg...)
#define vdbg(arg...)
if (unlikely(status) &&
(!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) ||
- status != -EILSEQ ))
- {
+ status != -EILSEQ)) {
if (status == -ESHUTDOWN)
return;
ptr += data_len;
__skb_pull(skb, data_len);
- if(!left)
+ if (!left)
continue;
memset(ptr, 0, left);
trailer[2] = ctrl->len >> 8;
trailer[3] = ctrl->len;
- ctrl->crc = ~ crc32_be(ctrl->crc, ptr, left - 4);
+ ctrl->crc = ~crc32_be(ctrl->crc, ptr, left - 4);
trailer[4] = ctrl->crc >> 24;
trailer[5] = ctrl->crc >> 16;
target[3] |= 0x2; /* adjust PTI */
ctrl->len = 0; /* tag this skb finished */
- }
- else
+ } else
ctrl->crc = crc32_be(ctrl->crc, ptr, left);
}
instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->bulk_out);
/* tx buffer size must be a positive multiple of the stride */
- instance->tx_channel.buf_size = max (instance->tx_channel.stride,
+ instance->tx_channel.buf_size = max(instance->tx_channel.stride,
snd_buf_bytes - (snd_buf_bytes % instance->tx_channel.stride));
/* rx buffer size must be a positive multiple of the endpoint maxpacket */
goto fail_unbind;
}
- num_packets = max (1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */
+ num_packets = max(1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */
if (num_packets * maxpacket > UDSL_MAX_BUF_SIZE)
num_packets--;
usb_free_urb(instance->urbs[i]);
}
- kfree (instance);
+ kfree(instance);
return error;
}
for (i = 0; i < len;) {
buffer[0] = '\0';
sprintf(buffer, "%.3d :", i);
- for (j = 0; (j < 16) && (i < len); j++, i++) {
+ for (j = 0; (j < 16) && (i < len); j++, i++)
sprintf(buffer, "%s %2.2x", buffer, data[i]);
- }
dbg("%s", buffer);
}
return i;
dev_warn(&(instance)->usb_intf->dev, \
"failed assertion '%s' at line %d", \
__stringify(x), __LINE__); \
- } while(0)
+ } while (0)
#endif
#define usb_err(instance, format, arg...) \
dev_warn(&(instance)->usb_intf->dev , format , ## arg)
#ifdef DEBUG
#define usb_dbg(instance, format, arg...) \
- dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg)
+ dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg)
#else
#define usb_dbg(instance, format, arg...) \
do {} while (0)
/*
* Assuming all methods exist and succeed, they are called in this order:
*
-* bind, heavy_init, atm_start, ..., atm_stop, unbind
+* bind, heavy_init, atm_start, ..., atm_stop, unbind
*/
struct usbatm_driver {
const char *driver_name;
/* init device ... can sleep, or cause probe() failure */
- int (*bind) (struct usbatm_data *, struct usb_interface *,
+ int (*bind) (struct usbatm_data *, struct usb_interface *,
const struct usb_device_id *id);
/* additional device initialization that is too slow to be done in probe() */
- int (*heavy_init) (struct usbatm_data *, struct usb_interface *);
+ int (*heavy_init) (struct usbatm_data *, struct usb_interface *);
/* cleanup device ... can sleep, but can't fail */
- void (*unbind) (struct usbatm_data *, struct usb_interface *);
+ void (*unbind) (struct usbatm_data *, struct usb_interface *);
/* init ATM device ... can sleep, or cause ATM initialization failure */
int (*atm_start) (struct usbatm_data *, struct atm_dev *);
/* cleanup ATM device ... can sleep, but can't fail */
void (*atm_stop) (struct usbatm_data *, struct atm_dev *);
- int bulk_in; /* bulk rx endpoint */
- int isoc_in; /* isochronous rx endpoint */
- int bulk_out; /* bulk tx endpoint */
+ int bulk_in; /* bulk rx endpoint */
+ int isoc_in; /* isochronous rx endpoint */
+ int bulk_out; /* bulk tx endpoint */
unsigned rx_padding;
unsigned tx_padding;
struct usbatm_data {
/******************
* public fields *
- ******************/
+ ******************/
/* mini driver */
struct usbatm_driver *driver;
/********************************
* private fields - do not use *
- ********************************/
+ ********************************/
struct kref refcount;
struct mutex serialize;
static struct usb_device_id xusbatm_usb_ids[XUSBATM_DRIVERS_MAX + 1];
static struct usb_driver xusbatm_usb_driver;
-static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int altsetting, u8 ep)
+static struct usb_interface *xusbatm_find_intf(struct usb_device *usb_dev, int altsetting, u8 ep)
{
struct usb_host_interface *alt;
struct usb_interface *intf;
int i, j;
- for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++)
+ for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++)
if ((intf = usb_dev->actconfig->interface[i]) && (alt = usb_altnum_to_altsetting(intf, altsetting)))
for (j = 0; j < alt->desc.bNumEndpoints; j++)
if (alt->endpoint[j].desc.bEndpointAddress == ep)
return NULL;
}
-static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device *usb_dev,
+static int xusbatm_capture_intf(struct usbatm_data *usbatm, struct usb_device *usb_dev,
struct usb_interface *intf, int altsetting, int claim)
{
int ifnum = intf->altsetting->desc.bInterfaceNumber;
return 0;
}
-static void xusbatm_release_intf (struct usb_device *usb_dev, struct usb_interface *intf, int claimed)
+static void xusbatm_release_intf(struct usb_device *usb_dev, struct usb_interface *intf, int claimed)
{
if (claimed) {
usb_set_intfdata(intf, NULL);
usb_dbg(usbatm, "%s entered\n", __func__);
- for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
+ for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
struct usb_interface *cur_intf = usb_dev->actconfig->interface[i];
if (cur_intf && (usb_get_intfdata(cur_intf) == usbatm)) {
if (unlikely(hcd->state == HC_STATE_HALT))
return;
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
return;
/* Handle Start of frame events */
{
hcd->uses_new_polling = 1;
hcd->state = HC_STATE_RUNNING;
- hcd->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
return 0;
}
static int acm_tty_chars_in_buffer(struct tty_struct *tty);
-static void acm_port_down(struct acm *acm, int drain)
+static void acm_port_down(struct acm *acm)
{
int i, nr = acm->rx_buflimit;
mutex_lock(&open_mutex);
if (acm->dev) {
usb_autopm_get_interface(acm->control);
acm_set_control(acm, acm->ctrlout = 0);
- /* try letting the last writes drain naturally */
- if (drain) {
- wait_event_interruptible_timeout(acm->drain_wait,
- (ACM_NW == acm_wb_is_avail(acm)) || !acm->dev,
- ACM_CLOSE_TIMEOUT * HZ);
- }
usb_kill_urb(acm->ctrlurb);
for (i = 0; i < ACM_NW; i++)
usb_kill_urb(acm->wb[i].urb);
{
struct acm *acm = tty->driver_data;
tty_port_hangup(&acm->port);
- acm_port_down(acm, 0);
+ acm_port_down(acm);
}
static void acm_tty_close(struct tty_struct *tty, struct file *filp)
mutex_unlock(&open_mutex);
return;
}
- acm_port_down(acm, 0);
+ acm_port_down(acm);
tty_port_close_end(&acm->port, tty);
tty_port_tty_set(&acm->port, NULL);
}
* ->lock locks what interrupt accesses.
*/
struct usblp {
- struct usb_device *dev; /* USB device */
+ struct usb_device *dev; /* USB device */
struct mutex wmut;
struct mutex mut;
spinlock_t lock; /* locks rcomplete, wcomplete */
};
#ifdef DEBUG
-static void usblp_dump(struct usblp *usblp) {
+static void usblp_dump(struct usblp *usblp)
+{
int p;
dbg("usblp=0x%p", usblp);
{ 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */
{ 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */
{ 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */
- { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
- { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
+ { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
+ { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
{ 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */
{ 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */
{ 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
/* High byte has the interface index.
Low byte has the alternate setting.
*/
- if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) {
- index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
- }
+ if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS))
+ index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
retval = usb_control_msg(usblp->dev,
dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
return newerr;
}
-static int handle_bidir (struct usblp *usblp)
+static int handle_bidir(struct usblp *usblp)
{
if (usblp->bidir && usblp->used) {
if (usblp_submit_read(usblp) < 0)
if (minor < 0)
return -ENODEV;
- mutex_lock (&usblp_mutex);
+ mutex_lock(&usblp_mutex);
retval = -ENODEV;
intf = usb_find_interface(&usblp_driver, minor);
- if (!intf) {
+ if (!intf)
goto out;
- }
- usblp = usb_get_intfdata (intf);
+ usblp = usb_get_intfdata(intf);
if (!usblp || !usblp->dev || !usblp->present)
goto out;
retval = -EIO;
}
out:
- mutex_unlock (&usblp_mutex);
+ mutex_unlock(&usblp_mutex);
return retval;
}
-static void usblp_cleanup (struct usblp *usblp)
+static void usblp_cleanup(struct usblp *usblp)
{
printk(KERN_INFO "usblp%d: removed\n", usblp->minor);
kfree(usblp->readbuf);
- kfree (usblp->device_id_string);
- kfree (usblp->statusbuf);
- kfree (usblp);
+ kfree(usblp->device_id_string);
+ kfree(usblp->statusbuf);
+ kfree(usblp);
}
static void usblp_unlink_urbs(struct usblp *usblp)
usblp->flags &= ~LP_ABORT;
- mutex_lock (&usblp_mutex);
+ mutex_lock(&usblp_mutex);
usblp->used = 0;
if (usblp->present) {
usblp_unlink_urbs(usblp);
usb_autopm_put_interface(usblp->intf);
- } else /* finish cleanup from disconnect */
- usblp_cleanup (usblp);
- mutex_unlock (&usblp_mutex);
+ } else /* finish cleanup from disconnect */
+ usblp_cleanup(usblp);
+ mutex_unlock(&usblp_mutex);
return 0;
}
int twoints[2];
int retval = 0;
- mutex_lock (&usblp->mut);
+ mutex_lock(&usblp->mut);
if (!usblp->present) {
retval = -ENODEV;
goto done;
}
dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd),
- _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd) );
+ _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd));
if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */
switch (_IOC_NR(cmd)) {
- case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
- if (_IOC_DIR(cmd) != _IOC_READ) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
+ if (_IOC_DIR(cmd) != _IOC_READ) {
+ retval = -EINVAL;
+ goto done;
+ }
- length = usblp_cache_device_id_string(usblp);
- if (length < 0) {
- retval = length;
- goto done;
- }
- if (length > _IOC_SIZE(cmd))
- length = _IOC_SIZE(cmd); /* truncate */
-
- if (copy_to_user((void __user *) arg,
- usblp->device_id_string,
- (unsigned long) length)) {
- retval = -EFAULT;
- goto done;
- }
+ length = usblp_cache_device_id_string(usblp);
+ if (length < 0) {
+ retval = length;
+ goto done;
+ }
+ if (length > _IOC_SIZE(cmd))
+ length = _IOC_SIZE(cmd); /* truncate */
+
+ if (copy_to_user((void __user *) arg,
+ usblp->device_id_string,
+ (unsigned long) length)) {
+ retval = -EFAULT;
+ goto done;
+ }
- break;
+ break;
- case IOCNR_GET_PROTOCOLS:
- if (_IOC_DIR(cmd) != _IOC_READ ||
- _IOC_SIZE(cmd) < sizeof(twoints)) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_GET_PROTOCOLS:
+ if (_IOC_DIR(cmd) != _IOC_READ ||
+ _IOC_SIZE(cmd) < sizeof(twoints)) {
+ retval = -EINVAL;
+ goto done;
+ }
- twoints[0] = usblp->current_protocol;
- twoints[1] = 0;
- for (i = USBLP_FIRST_PROTOCOL;
- i <= USBLP_LAST_PROTOCOL; i++) {
- if (usblp->protocol[i].alt_setting >= 0)
- twoints[1] |= (1<<i);
- }
+ twoints[0] = usblp->current_protocol;
+ twoints[1] = 0;
+ for (i = USBLP_FIRST_PROTOCOL;
+ i <= USBLP_LAST_PROTOCOL; i++) {
+ if (usblp->protocol[i].alt_setting >= 0)
+ twoints[1] |= (1<<i);
+ }
- if (copy_to_user((void __user *)arg,
- (unsigned char *)twoints,
- sizeof(twoints))) {
- retval = -EFAULT;
- goto done;
- }
+ if (copy_to_user((void __user *)arg,
+ (unsigned char *)twoints,
+ sizeof(twoints))) {
+ retval = -EFAULT;
+ goto done;
+ }
- break;
+ break;
- case IOCNR_SET_PROTOCOL:
- if (_IOC_DIR(cmd) != _IOC_WRITE) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_SET_PROTOCOL:
+ if (_IOC_DIR(cmd) != _IOC_WRITE) {
+ retval = -EINVAL;
+ goto done;
+ }
#ifdef DEBUG
- if (arg == -10) {
- usblp_dump(usblp);
- break;
- }
+ if (arg == -10) {
+ usblp_dump(usblp);
+ break;
+ }
#endif
- usblp_unlink_urbs(usblp);
- retval = usblp_set_protocol(usblp, arg);
- if (retval < 0) {
- usblp_set_protocol(usblp,
- usblp->current_protocol);
- }
- break;
+ usblp_unlink_urbs(usblp);
+ retval = usblp_set_protocol(usblp, arg);
+ if (retval < 0) {
+ usblp_set_protocol(usblp,
+ usblp->current_protocol);
+ }
+ break;
- case IOCNR_HP_SET_CHANNEL:
- if (_IOC_DIR(cmd) != _IOC_WRITE ||
- le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
- usblp->quirks & USBLP_QUIRK_BIDIR) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_HP_SET_CHANNEL:
+ if (_IOC_DIR(cmd) != _IOC_WRITE ||
+ le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
+ usblp->quirks & USBLP_QUIRK_BIDIR) {
+ retval = -EINVAL;
+ goto done;
+ }
- err = usblp_hp_channel_change_request(usblp,
- arg, &newChannel);
- if (err < 0) {
- dev_err(&usblp->dev->dev,
- "usblp%d: error = %d setting "
- "HP channel\n",
- usblp->minor, err);
- retval = -EIO;
- goto done;
- }
+ err = usblp_hp_channel_change_request(usblp,
+ arg, &newChannel);
+ if (err < 0) {
+ dev_err(&usblp->dev->dev,
+ "usblp%d: error = %d setting "
+ "HP channel\n",
+ usblp->minor, err);
+ retval = -EIO;
+ goto done;
+ }
- dbg("usblp%d requested/got HP channel %ld/%d",
- usblp->minor, arg, newChannel);
- break;
+ dbg("usblp%d requested/got HP channel %ld/%d",
+ usblp->minor, arg, newChannel);
+ break;
- case IOCNR_GET_BUS_ADDRESS:
- if (_IOC_DIR(cmd) != _IOC_READ ||
- _IOC_SIZE(cmd) < sizeof(twoints)) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_GET_BUS_ADDRESS:
+ if (_IOC_DIR(cmd) != _IOC_READ ||
+ _IOC_SIZE(cmd) < sizeof(twoints)) {
+ retval = -EINVAL;
+ goto done;
+ }
- twoints[0] = usblp->dev->bus->busnum;
- twoints[1] = usblp->dev->devnum;
- if (copy_to_user((void __user *)arg,
- (unsigned char *)twoints,
- sizeof(twoints))) {
- retval = -EFAULT;
- goto done;
- }
+ twoints[0] = usblp->dev->bus->busnum;
+ twoints[1] = usblp->dev->devnum;
+ if (copy_to_user((void __user *)arg,
+ (unsigned char *)twoints,
+ sizeof(twoints))) {
+ retval = -EFAULT;
+ goto done;
+ }
- dbg("usblp%d is bus=%d, device=%d",
- usblp->minor, twoints[0], twoints[1]);
- break;
+ dbg("usblp%d is bus=%d, device=%d",
+ usblp->minor, twoints[0], twoints[1]);
+ break;
- case IOCNR_GET_VID_PID:
- if (_IOC_DIR(cmd) != _IOC_READ ||
- _IOC_SIZE(cmd) < sizeof(twoints)) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_GET_VID_PID:
+ if (_IOC_DIR(cmd) != _IOC_READ ||
+ _IOC_SIZE(cmd) < sizeof(twoints)) {
+ retval = -EINVAL;
+ goto done;
+ }
- twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
- twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
- if (copy_to_user((void __user *)arg,
- (unsigned char *)twoints,
- sizeof(twoints))) {
- retval = -EFAULT;
- goto done;
- }
+ twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
+ twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
+ if (copy_to_user((void __user *)arg,
+ (unsigned char *)twoints,
+ sizeof(twoints))) {
+ retval = -EFAULT;
+ goto done;
+ }
- dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X",
- usblp->minor, twoints[0], twoints[1]);
- break;
+ dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X",
+ usblp->minor, twoints[0], twoints[1]);
+ break;
- case IOCNR_SOFT_RESET:
- if (_IOC_DIR(cmd) != _IOC_NONE) {
- retval = -EINVAL;
- goto done;
- }
- retval = usblp_reset(usblp);
- break;
- default:
- retval = -ENOTTY;
+ case IOCNR_SOFT_RESET:
+ if (_IOC_DIR(cmd) != _IOC_NONE) {
+ retval = -EINVAL;
+ goto done;
+ }
+ retval = usblp_reset(usblp);
+ break;
+ default:
+ retval = -ENOTTY;
}
else /* old-style ioctl value */
switch (cmd) {
- case LPGETSTATUS:
- if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
- if (printk_ratelimit())
- printk(KERN_ERR "usblp%d:"
- "failed reading printer status (%d)\n",
- usblp->minor, retval);
- retval = -EIO;
- goto done;
- }
- status = *usblp->statusbuf;
- if (copy_to_user ((void __user *)arg, &status, sizeof(int)))
- retval = -EFAULT;
- break;
+ case LPGETSTATUS:
+ if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
+ if (printk_ratelimit())
+ printk(KERN_ERR "usblp%d:"
+ "failed reading printer status (%d)\n",
+ usblp->minor, retval);
+ retval = -EIO;
+ goto done;
+ }
+ status = *usblp->statusbuf;
+ if (copy_to_user((void __user *)arg, &status, sizeof(int)))
+ retval = -EFAULT;
+ break;
- case LPABORT:
- if (arg)
- usblp->flags |= LP_ABORT;
- else
- usblp->flags &= ~LP_ABORT;
- break;
+ case LPABORT:
+ if (arg)
+ usblp->flags |= LP_ABORT;
+ else
+ usblp->flags &= ~LP_ABORT;
+ break;
- default:
- retval = -ENOTTY;
+ default:
+ retval = -ENOTTY;
}
done:
- mutex_unlock (&usblp->mut);
+ mutex_unlock(&usblp->mut);
return retval;
}
}
done:
- mutex_unlock (&usblp->mut);
+ mutex_unlock(&usblp->mut);
return count;
}
* while you are sending print data, and you don't try to query the
* printer status every couple of milliseconds, you will probably be OK.
*/
-static unsigned int usblp_quirks (__u16 vendor, __u16 product)
+static unsigned int usblp_quirks(__u16 vendor, __u16 product)
{
int i;
if (vendor == quirk_printers[i].vendorId &&
product == quirk_printers[i].productId)
return quirk_printers[i].quirks;
- }
+ }
return 0;
}
static ssize_t usblp_show_ieee1284_id(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_interface *intf = to_usb_interface(dev);
- struct usblp *usblp = usb_get_intfdata (intf);
+ struct usblp *usblp = usb_get_intfdata(intf);
if (usblp->device_id_string[0] == 0 &&
usblp->device_id_string[1] == 0)
static int usblp_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- struct usb_device *dev = interface_to_usbdev (intf);
+ struct usb_device *dev = interface_to_usbdev(intf);
struct usblp *usblp;
int protocol;
int retval;
}
usblp->dev = dev;
mutex_init(&usblp->wmut);
- mutex_init (&usblp->mut);
+ mutex_init(&usblp->mut);
spin_lock_init(&usblp->lock);
init_waitqueue_head(&usblp->rwait);
init_waitqueue_head(&usblp->wwait);
usblp_check_status(usblp, 0);
#endif
- usb_set_intfdata (intf, usblp);
+ usb_set_intfdata(intf, usblp);
usblp->present = 1;
return 0;
abort_intfdata:
- usb_set_intfdata (intf, NULL);
+ usb_set_intfdata(intf, NULL);
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
abort:
kfree(usblp->readbuf);
static void usblp_disconnect(struct usb_interface *intf)
{
- struct usblp *usblp = usb_get_intfdata (intf);
+ struct usblp *usblp = usb_get_intfdata(intf);
usb_deregister_dev(intf, &usblp_class);
if (!usblp || !usblp->dev) {
dev_err(&intf->dev, "bogus disconnect\n");
- BUG ();
+ BUG();
}
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
- mutex_lock (&usblp_mutex);
- mutex_lock (&usblp->mut);
+ mutex_lock(&usblp_mutex);
+ mutex_lock(&usblp->mut);
usblp->present = 0;
wake_up(&usblp->wwait);
wake_up(&usblp->rwait);
- usb_set_intfdata (intf, NULL);
+ usb_set_intfdata(intf, NULL);
usblp_unlink_urbs(usblp);
- mutex_unlock (&usblp->mut);
+ mutex_unlock(&usblp->mut);
if (!usblp->used)
- usblp_cleanup (usblp);
- mutex_unlock (&usblp_mutex);
+ usblp_cleanup(usblp);
+ mutex_unlock(&usblp_mutex);
}
static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
{
- struct usblp *usblp = usb_get_intfdata (intf);
+ struct usblp *usblp = usb_get_intfdata(intf);
usblp_unlink_urbs(usblp);
#if 0 /* XXX Do we want this? What if someone is reading, should we fail? */
static int usblp_resume(struct usb_interface *intf)
{
- struct usblp *usblp = usb_get_intfdata (intf);
+ struct usblp *usblp = usb_get_intfdata(intf);
int r;
- r = handle_bidir (usblp);
+ r = handle_bidir(usblp);
return r;
}
{ } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, usblp_ids);
+MODULE_DEVICE_TABLE(usb, usblp_ids);
static struct usb_driver usblp_driver = {
.name = "usblp",
module_init(usblp_init);
module_exit(usblp_exit);
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
module_param(proto_bias, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(proto_bias, "Favourite protocol number");
MODULE_LICENSE("GPL");
default:
if (intf->dev.driver)
driver = to_usb_driver(intf->dev.driver);
- if (driver == NULL || driver->ioctl == NULL) {
+ if (driver == NULL || driver->unlocked_ioctl == NULL) {
retval = -ENOTTY;
} else {
- /* keep API that guarantees BKL */
- lock_kernel();
- retval = driver->ioctl(intf, ctl->ioctl_code, buf);
- unlock_kernel();
+ retval = driver->unlocked_ioctl(intf, ctl->ioctl_code, buf);
if (retval == -ENOIOCTLCMD)
retval = -ENOTTY;
}
}
/* Prevent the parent from suspending immediately after */
- else if (udev->parent) {
+ else if (udev->parent)
udev->parent->last_busy = jiffies;
- }
}
/* Runtime suspend for a USB interface doesn't mean anything. */
return 0;
}
-static struct dev_pm_ops usb_bus_pm_ops = {
+static const struct dev_pm_ops usb_bus_pm_ops = {
.runtime_suspend = usb_runtime_suspend,
.runtime_resume = usb_runtime_resume,
.runtime_idle = usb_runtime_idle,
};
-#else
-
-#define usb_bus_pm_ops (*(struct dev_pm_ops *) NULL)
-
#endif /* CONFIG_USB_SUSPEND */
struct bus_type usb_bus_type = {
.name = "usb",
.match = usb_device_match,
.uevent = usb_uevent,
+#ifdef CONFIG_USB_SUSPEND
.pm = &usb_bus_pm_ops,
+#endif
};
switch (usb_endpoint_type(ep->desc)) {
case USB_ENDPOINT_XFER_CONTROL:
- if (ep->udev->speed == USB_SPEED_HIGH) /* uframes per NAK */
+ if (ep->udev->speed == USB_SPEED_HIGH)
+ /* uframes per NAK */
interval = ep->desc->bInterval;
break;
+
case USB_ENDPOINT_XFER_ISOC:
interval = 1 << (ep->desc->bInterval - 1);
break;
+
case USB_ENDPOINT_XFER_BULK:
- if (ep->udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */
+ if (ep->udev->speed == USB_SPEED_HIGH && !in)
+ /* uframes per NAK */
interval = ep->desc->bInterval;
break;
+
case USB_ENDPOINT_XFER_INT:
if (ep->udev->speed == USB_SPEED_HIGH)
interval = 1 << (ep->desc->bInterval - 1);
/* When the first config's first interface is one of Microsoft's
* pet nonstandard Ethernet-over-USB protocols, ignore it unless
* this kernel has enabled the necessary host side driver.
+ * But: Don't ignore it if it's the only config.
*/
- if (i == 0 && desc && (is_rndis(desc) || is_activesync(desc))) {
+ if (i == 0 && num_configs > 1 && desc &&
+ (is_rndis(desc) || is_activesync(desc))) {
#if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
continue;
#else
* vice versa.
*/
companion = NULL;
- for (;;) {
- companion = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, companion);
- if (!companion)
- break;
+ for_each_pci_dev(companion) {
if (companion->bus != pdev->bus ||
PCI_SLOT(companion->devfn) != slot)
continue;
if (retval != 0)
goto err4;
set_hs_companion(dev, hcd);
+
+ if (pci_dev_run_wake(dev))
+ pm_runtime_put_noidle(&dev->dev);
return retval;
err4:
if (!hcd)
return;
+ if (pci_dev_run_wake(dev))
+ pm_runtime_get_noresume(&dev->dev);
+
+ /* Fake an interrupt request in order to give the driver a chance
+ * to test whether the controller hardware has been removed (e.g.,
+ * cardbus physical eject).
+ */
+ local_irq_disable();
+ usb_hcd_irq(0, hcd);
+ local_irq_enable();
+
usb_remove_hcd(hcd);
if (hcd->driver->flags & HCD_MEMORY) {
iounmap(hcd->regs);
if (!hcd)
return;
- if (hcd->driver->shutdown)
+ if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
+ hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_OPS
+
+#ifdef CONFIG_PPC_PMAC
+static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
+{
+ /* Enanble or disable ASIC clocks for USB */
+ if (machine_is(powermac)) {
+ struct device_node *of_node;
+
+ of_node = pci_device_to_OF_node(pci_dev);
+ if (of_node)
+ pmac_call_feature(PMAC_FTR_USB_ENABLE,
+ of_node, 0, enable);
+ }
+}
+
+#else
+
+static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
+{}
+
+#endif /* CONFIG_PPC_PMAC */
static int check_root_hub_suspended(struct device *dev)
{
return 0;
}
-static int hcd_pci_suspend(struct device *dev)
+static int suspend_common(struct device *dev, bool do_wakeup)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
if (retval)
return retval;
- /* We might already be suspended (runtime PM -- not yet written) */
- if (pci_dev->current_state != PCI_D0)
- return retval;
-
if (hcd->driver->pci_suspend) {
- retval = hcd->driver->pci_suspend(hcd);
+ /* Optimization: Don't suspend if a root-hub wakeup is
+ * pending and it would cause the HCD to wake up anyway.
+ */
+ if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
+ return -EBUSY;
+ retval = hcd->driver->pci_suspend(hcd, do_wakeup);
suspend_report_result(hcd->driver->pci_suspend, retval);
+
+ /* Check again in case wakeup raced with pci_suspend */
+ if (retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
+ if (hcd->driver->pci_resume)
+ hcd->driver->pci_resume(hcd, false);
+ retval = -EBUSY;
+ }
if (retval)
return retval;
}
return retval;
}
+static int resume_common(struct device *dev, int event)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+ int retval;
+
+ if (hcd->state != HC_STATE_SUSPENDED) {
+ dev_dbg(dev, "can't resume, not suspended!\n");
+ return 0;
+ }
+
+ retval = pci_enable_device(pci_dev);
+ if (retval < 0) {
+ dev_err(dev, "can't re-enable after resume, %d!\n", retval);
+ return retval;
+ }
+
+ pci_set_master(pci_dev);
+
+ clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+ if (hcd->driver->pci_resume) {
+ if (event != PM_EVENT_AUTO_RESUME)
+ wait_for_companions(pci_dev, hcd);
+
+ retval = hcd->driver->pci_resume(hcd,
+ event == PM_EVENT_RESTORE);
+ if (retval) {
+ dev_err(dev, "PCI post-resume error %d!\n", retval);
+ usb_hc_died(hcd);
+ }
+ }
+ return retval;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int hcd_pci_suspend(struct device *dev)
+{
+ return suspend_common(dev, device_may_wakeup(dev));
+}
+
static int hcd_pci_suspend_noirq(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
return retval;
}
-#ifdef CONFIG_PPC_PMAC
- /* Disable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(pci_dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
- }
-#endif
+ powermac_set_asic(pci_dev, 0);
return retval;
}
{
struct pci_dev *pci_dev = to_pci_dev(dev);
-#ifdef CONFIG_PPC_PMAC
- /* Reenable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(pci_dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE,
- of_node, 0, 1);
- }
-#endif
+ powermac_set_asic(pci_dev, 1);
/* Go back to D0 and disable remote wakeup */
pci_back_from_sleep(pci_dev);
return 0;
}
-static int resume_common(struct device *dev, bool hibernated)
+static int hcd_pci_resume(struct device *dev)
{
- struct pci_dev *pci_dev = to_pci_dev(dev);
- struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
- int retval;
+ return resume_common(dev, PM_EVENT_RESUME);
+}
- if (hcd->state != HC_STATE_SUSPENDED) {
- dev_dbg(dev, "can't resume, not suspended!\n");
- return 0;
- }
+static int hcd_pci_restore(struct device *dev)
+{
+ return resume_common(dev, PM_EVENT_RESTORE);
+}
- retval = pci_enable_device(pci_dev);
- if (retval < 0) {
- dev_err(dev, "can't re-enable after resume, %d!\n", retval);
- return retval;
- }
+#else
- pci_set_master(pci_dev);
+#define hcd_pci_suspend NULL
+#define hcd_pci_suspend_noirq NULL
+#define hcd_pci_resume_noirq NULL
+#define hcd_pci_resume NULL
+#define hcd_pci_restore NULL
- clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+#endif /* CONFIG_PM_SLEEP */
- if (hcd->driver->pci_resume) {
- /* This call should be made only during system resume,
- * not during runtime resume.
- */
- wait_for_companions(pci_dev, hcd);
+#ifdef CONFIG_PM_RUNTIME
- retval = hcd->driver->pci_resume(hcd, hibernated);
- if (retval) {
- dev_err(dev, "PCI post-resume error %d!\n", retval);
- usb_hc_died(hcd);
- }
- }
+static int hcd_pci_runtime_suspend(struct device *dev)
+{
+ int retval;
+
+ retval = suspend_common(dev, true);
+ if (retval == 0)
+ powermac_set_asic(to_pci_dev(dev), 0);
+ dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
return retval;
}
-static int hcd_pci_resume(struct device *dev)
+static int hcd_pci_runtime_resume(struct device *dev)
{
- return resume_common(dev, false);
-}
+ int retval;
-static int hcd_pci_restore(struct device *dev)
-{
- return resume_common(dev, true);
+ powermac_set_asic(to_pci_dev(dev), 1);
+ retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
+ dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
+ return retval;
}
+#else
+
+#define hcd_pci_runtime_suspend NULL
+#define hcd_pci_runtime_resume NULL
+
+#endif /* CONFIG_PM_RUNTIME */
+
const struct dev_pm_ops usb_hcd_pci_pm_ops = {
.suspend = hcd_pci_suspend,
.suspend_noirq = hcd_pci_suspend_noirq,
.poweroff_noirq = hcd_pci_suspend_noirq,
.restore_noirq = hcd_pci_resume_noirq,
.restore = hcd_pci_restore,
+ .runtime_suspend = hcd_pci_runtime_suspend,
+ .runtime_resume = hcd_pci_runtime_resume,
};
EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
-#endif /* CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM_OPS */
unsigned long flags;
char buffer[6]; /* Any root hubs with > 31 ports? */
- if (unlikely(!hcd->rh_registered))
+ if (unlikely(!hcd->rh_pollable))
return;
if (!hcd->uses_new_polling && !hcd->status_urb)
return;
spin_lock_irqsave(&hcd_root_hub_lock, flags);
urb = hcd->status_urb;
if (urb) {
- hcd->poll_pending = 0;
+ clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
hcd->status_urb = NULL;
urb->actual_length = length;
memcpy(urb->transfer_buffer, buffer, length);
spin_lock(&hcd_root_hub_lock);
} else {
length = 0;
- hcd->poll_pending = 1;
+ set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
}
spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
}
* exceed that limit if HZ is 100. The math is more clunky than
* maybe expected, this is to make sure that all timers for USB devices
* fire at the same time to give the CPU a break inbetween */
- if (hcd->uses_new_polling ? hcd->poll_rh :
+ if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
(length == 0 && hcd->status_urb != NULL))
mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
}
mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
/* If a status change has already occurred, report it ASAP */
- else if (hcd->poll_pending)
+ else if (HCD_POLL_PENDING(hcd))
mod_timer(&hcd->rh_timer, jiffies);
retval = 0;
done:
* finish unlinking the initial failed usb_set_address()
* or device descriptor fetch.
*/
- if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
- !is_root_hub(urb->dev)) {
+ if (!HCD_SAW_IRQ(hcd) && !is_root_hub(urb->dev)) {
dev_warn(hcd->self.controller, "Unlink after no-IRQ? "
"Controller is probably using the wrong IRQ.\n");
set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
{
unsigned char *vaddr;
+ if (*vaddr_handle == NULL) {
+ WARN_ON_ONCE(1);
+ return -EFAULT;
+ }
+
vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
mem_flags, dma_handle);
if (!vaddr)
dev_dbg(&rhdev->dev, "usb %s%s\n",
(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
+ clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
if (!hcd->driver->bus_resume)
return -ENOENT;
if (hcd->state == HC_STATE_RUNNING)
unsigned long flags;
spin_lock_irqsave (&hcd_root_hub_lock, flags);
- if (hcd->rh_registered)
+ if (hcd->rh_registered) {
+ set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
queue_work(pm_wq, &hcd->wakeup_work);
+ }
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
}
EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
*/
local_irq_save(flags);
- if (unlikely(hcd->state == HC_STATE_HALT ||
- !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ if (unlikely(hcd->state == HC_STATE_HALT || !HCD_HW_ACCESSIBLE(hcd))) {
rc = IRQ_NONE;
} else if (hcd->driver->irq(hcd) == IRQ_NONE) {
rc = IRQ_NONE;
local_irq_restore(flags);
return rc;
}
+EXPORT_SYMBOL_GPL(usb_hcd_irq);
/*-------------------------------------------------------------------------*/
spin_lock_irqsave (&hcd_root_hub_lock, flags);
if (hcd->rh_registered) {
- hcd->poll_rh = 0;
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
/* make khubd clean up old urbs and devices */
usb_set_device_state (hcd->self.root_hub,
retval = -ENOMEM;
goto err_allocate_root_hub;
}
+ hcd->self.root_hub = rhdev;
switch (hcd->driver->flags & HCD_MASK) {
case HCD_USB11:
rhdev->speed = USB_SPEED_SUPER;
break;
default:
- goto err_allocate_root_hub;
+ goto err_set_rh_speed;
}
- hcd->self.root_hub = rhdev;
/* wakeup flag init defaults to "everything works" for root hubs,
* but drivers can override it in reset() if needed, along with
dev_err(hcd->self.controller, "can't setup\n");
goto err_hcd_driver_setup;
}
+ hcd->rh_pollable = 1;
/* NOTE: root hub and controller capabilities may not be the same */
if (device_can_wakeup(hcd->self.controller)
retval);
goto error_create_attr_group;
}
- if (hcd->uses_new_polling && hcd->poll_rh)
+ if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
usb_hcd_poll_rh_status(hcd);
return retval;
error_create_attr_group:
+ if (HC_IS_RUNNING(hcd->state))
+ hcd->state = HC_STATE_QUIESCING;
+ spin_lock_irq(&hcd_root_hub_lock);
+ hcd->rh_registered = 0;
+ spin_unlock_irq(&hcd_root_hub_lock);
+
+#ifdef CONFIG_USB_SUSPEND
+ cancel_work_sync(&hcd->wakeup_work);
+#endif
mutex_lock(&usb_bus_list_lock);
- usb_disconnect(&hcd->self.root_hub);
+ usb_disconnect(&rhdev); /* Sets rhdev to NULL */
mutex_unlock(&usb_bus_list_lock);
err_register_root_hub:
+ hcd->rh_pollable = 0;
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ del_timer_sync(&hcd->rh_timer);
hcd->driver->stop(hcd);
+ hcd->state = HC_STATE_HALT;
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ del_timer_sync(&hcd->rh_timer);
err_hcd_driver_start:
if (hcd->irq >= 0)
free_irq(irqnum, hcd);
err_request_irq:
err_hcd_driver_setup:
- hcd->self.root_hub = NULL;
- usb_put_dev(rhdev);
+err_set_rh_speed:
+ usb_put_dev(hcd->self.root_hub);
err_allocate_root_hub:
usb_deregister_bus(&hcd->self);
err_register_bus:
*/
void usb_remove_hcd(struct usb_hcd *hcd)
{
+ struct usb_device *rhdev = hcd->self.root_hub;
+
dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
+ usb_get_dev(rhdev);
+ sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
+
if (HC_IS_RUNNING (hcd->state))
hcd->state = HC_STATE_QUIESCING;
cancel_work_sync(&hcd->wakeup_work);
#endif
- sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group);
mutex_lock(&usb_bus_list_lock);
- usb_disconnect(&hcd->self.root_hub);
+ usb_disconnect(&rhdev); /* Sets rhdev to NULL */
mutex_unlock(&usb_bus_list_lock);
+ /* Prevent any more root-hub status calls from the timer.
+ * The HCD might still restart the timer (if a port status change
+ * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
+ * the hub_status_data() callback.
+ */
+ hcd->rh_pollable = 0;
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ del_timer_sync(&hcd->rh_timer);
+
hcd->driver->stop(hcd);
hcd->state = HC_STATE_HALT;
- hcd->poll_rh = 0;
+ /* In case the HCD restarted the timer, stop it again. */
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
del_timer_sync(&hcd->rh_timer);
if (hcd->irq >= 0)
free_irq(hcd->irq, hcd);
+
+ usb_put_dev(hcd->self.root_hub);
usb_deregister_bus(&hcd->self);
hcd_buffer_destroy(hcd);
}
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
#include <linux/usb/hcd.h>
+#include <linux/usb/quirks.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/freezer.h>
return -ENODEV;
}
+/* No BKL needed */
static int
hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
{
pm_runtime_set_active(&udev->dev);
pm_runtime_enable(&udev->dev);
- usb_detect_quirks(udev);
err = usb_enumerate_device(udev); /* Read descriptors */
if (err < 0)
goto fail;
}
retval = 0;
-
+ /* notify HCD that we have a device connected and addressed */
+ if (hcd->driver->update_device)
+ hcd->driver->update_device(hcd, udev);
fail:
if (retval) {
hub_port_disable(hub, port1, 0);
if (status < 0)
goto loop;
+ usb_detect_quirks(udev);
+ if (udev->quirks & USB_QUIRK_DELAY_INIT)
+ msleep(1000);
+
/* consecutive bus-powered hubs aren't reliable; they can
* violate the voltage drop budget. if the new child has
* a "powered" LED, users should notice we didn't enable it
.reset_resume = hub_reset_resume,
.pre_reset = hub_pre_reset,
.post_reset = hub_post_reset,
- .ioctl = hub_ioctl,
+ .unlocked_ioctl = hub_ioctl,
.id_table = hub_id_table,
.supports_autosuspend = 1,
};
return -EINVAL;
}
- lock_kernel();
-
if (usbfs_mount && usbfs_mount->mnt_sb)
update_sb(usbfs_mount->mnt_sb);
- unlock_kernel();
-
return 0;
}
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Harmony 700-series */
+ { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
+
/* Philips PSC805 audio device */
{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
}
EXPORT_SYMBOL_GPL(usb_anchor_urb);
+/* Callers must hold anchor->lock */
+static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor)
+{
+ urb->anchor = NULL;
+ list_del(&urb->anchor_list);
+ usb_put_urb(urb);
+ if (list_empty(&anchor->urb_list))
+ wake_up(&anchor->wait);
+}
+
/**
* usb_unanchor_urb - unanchors an URB
* @urb: pointer to the urb to anchor
return;
spin_lock_irqsave(&anchor->lock, flags);
- if (unlikely(anchor != urb->anchor)) {
- /* we've lost the race to another thread */
- spin_unlock_irqrestore(&anchor->lock, flags);
- return;
- }
- urb->anchor = NULL;
- list_del(&urb->anchor_list);
+ /*
+ * At this point, we could be competing with another thread which
+ * has the same intention. To protect the urb from being unanchored
+ * twice, only the winner of the race gets the job.
+ */
+ if (likely(anchor == urb->anchor))
+ __usb_unanchor_urb(urb, anchor);
spin_unlock_irqrestore(&anchor->lock, flags);
- usb_put_urb(urb);
- if (list_empty(&anchor->urb_list))
- wake_up(&anchor->wait);
}
EXPORT_SYMBOL_GPL(usb_unanchor_urb);
void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
{
struct urb *victim;
- unsigned long flags;
- spin_lock_irqsave(&anchor->lock, flags);
- while (!list_empty(&anchor->urb_list)) {
- victim = list_entry(anchor->urb_list.prev, struct urb,
- anchor_list);
- usb_get_urb(victim);
- spin_unlock_irqrestore(&anchor->lock, flags);
- /* this will unanchor the URB */
+ while ((victim = usb_get_from_anchor(anchor)) != NULL) {
usb_unlink_urb(victim);
usb_put_urb(victim);
- spin_lock_irqsave(&anchor->lock, flags);
}
- spin_unlock_irqrestore(&anchor->lock, flags);
}
EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
victim = list_entry(anchor->urb_list.next, struct urb,
anchor_list);
usb_get_urb(victim);
- spin_unlock_irqrestore(&anchor->lock, flags);
- usb_unanchor_urb(victim);
+ __usb_unanchor_urb(victim, anchor);
} else {
- spin_unlock_irqrestore(&anchor->lock, flags);
victim = NULL;
}
+ spin_unlock_irqrestore(&anchor->lock, flags);
return victim;
}
while (!list_empty(&anchor->urb_list)) {
victim = list_entry(anchor->urb_list.prev, struct urb,
anchor_list);
- usb_get_urb(victim);
- spin_unlock_irqrestore(&anchor->lock, flags);
- /* this may free the URB */
- usb_unanchor_urb(victim);
- usb_put_urb(victim);
- spin_lock_irqsave(&anchor->lock, flags);
+ __usb_unanchor_urb(victim, anchor);
}
spin_unlock_irqrestore(&anchor->lock, flags);
}
.restore = usb_dev_restore,
};
-#else
-
-#define usb_device_pm_ops (*(struct dev_pm_ops *) NULL)
-
#endif /* CONFIG_PM */
.release = usb_release_dev,
.uevent = usb_dev_uevent,
.devnode = usb_devnode,
+#ifdef CONFIG_PM
.pm = &usb_device_pm_ops,
+#endif
};
config USB_FUNCTIONFS
tristate "Function Filesystem (EXPERIMENTAL)"
depends on EXPERIMENTAL
+ select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
help
The Function Filesystem (FunctioFS) lets one create USB
composite functions in user space in the same way as GadgetFS
implemented in kernel space (for instance Ethernet, serial or
mass storage) and other are implemented in user space.
+ If you say "y" or "m" here you will be able what kind of
+ configurations the gadget will provide.
+
Say "y" to link the driver statically, or "m" to build
a dynamically linked module called "g_ffs".
config USB_FUNCTIONFS_ETH
- bool "Include CDC ECM (Ethernet) function"
+ bool "Include configuration with CDC ECM (Ethernet)"
depends on USB_FUNCTIONFS && NET
help
- Include an CDC ECM (Ethernet) funcion in the CDC ECM (Funcion)
- Filesystem. If you also say "y" to the RNDIS query below the
- gadget will have two configurations.
+ Include a configuration with CDC ECM funcion (Ethernet) and the
+ Funcion Filesystem.
config USB_FUNCTIONFS_RNDIS
- bool "Include RNDIS (Ethernet) function"
+ bool "Include configuration with RNDIS (Ethernet)"
depends on USB_FUNCTIONFS && NET
help
- Include an RNDIS (Ethernet) funcion in the Funcion Filesystem.
- If you also say "y" to the CDC ECM query above the gadget will
- have two configurations.
+ Include a configuration with RNDIS funcion (Ethernet) and the Filesystem.
config USB_FUNCTIONFS_GENERIC
bool "Include 'pure' configuration"
- depends on USB_FUNCTIONFS && (USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
+ depends on USB_FUNCTIONFS
help
- Include a configuration with FunctionFS and no Ethernet
- configuration.
+ Include a configuration with the Function Filesystem alone with
+ no Ethernet interface.
config USB_FILE_STORAGE
tristate "File-backed Storage Gadget"
config USB_G_MULTI
tristate "Multifunction Composite Gadget (EXPERIMENTAL)"
depends on BLOCK && NET
+ select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
help
The Multifunction Composite Gadget provides Ethernet (RNDIS
and/or CDC Ethernet), mass storage and ACM serial link
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "g_hid".
+config USB_G_DBGP
+ tristate "EHCI Debug Device Gadget"
+ help
+ This gadget emulates an EHCI Debug device. This is useful when you want
+ to interact with an EHCI Debug Port.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_dbgp".
+
+if USB_G_DBGP
+choice
+ prompt "EHCI Debug Device mode"
+ default USB_G_DBGP_SERIAL
+
+config USB_G_DBGP_PRINTK
+ depends on USB_G_DBGP
+ bool "printk"
+ help
+ Directly printk() received data. No interaction.
+
+config USB_G_DBGP_SERIAL
+ depends on USB_G_DBGP
+ bool "serial"
+ help
+ Userland can interact using /dev/ttyGSxxx.
+endchoice
+endif
+
# put drivers that need isochronous transfer support (for audio
# or video class gadget drivers), or specific hardware, here.
config USB_G_WEBCAM
g_cdc-objs := cdc2.o
g_multi-objs := multi.o
g_hid-objs := hid.o
+g_dbgp-objs := dbgp.o
g_nokia-objs := nokia.o
g_webcam-objs := webcam.o
obj-$(CONFIG_USB_ETH) += g_ether.o
obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
obj-$(CONFIG_USB_FUNCTIONFS) += g_ffs.o
-obj-$(CONFIG_USB_ETH_FUNCTIONFS) += g_eth_ffs.o
obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o
obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o
obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o
obj-$(CONFIG_USB_G_HID) += g_hid.o
+obj-$(CONFIG_USB_G_DBGP) += g_dbgp.o
obj-$(CONFIG_USB_G_MULTI) += g_multi.o
obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o
obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o
/*-------------------------------------------------------------------------*/
-static int __init audio_do_config(struct usb_configuration *c)
+static int __ref audio_do_config(struct usb_configuration *c)
{
/* FIXME alloc iConfiguration string, set it in c->strings */
/*-------------------------------------------------------------------------*/
-static int __init audio_bind(struct usb_composite_dev *cdev)
+static int __ref audio_bind(struct usb_composite_dev *cdev)
{
int gcnum;
int status;
/*
* We _always_ have both CDC ECM and CDC ACM functions.
*/
-static int __init cdc_do_config(struct usb_configuration *c)
+static int __ref cdc_do_config(struct usb_configuration *c)
{
int status;
/*-------------------------------------------------------------------------*/
-static int __init cdc_bind(struct usb_composite_dev *cdev)
+static int __ref cdc_bind(struct usb_composite_dev *cdev)
{
int gcnum;
struct usb_gadget *gadget = cdev->gadget;
* string IDs. Drivers for functions, configurations, or gadgets will
* then store that ID in the appropriate descriptors and string table.
*
- * All string identifier should be allocated using this routine, to
- * ensure that for example different functions don't wrongly assign
- * different meanings to the same identifier.
+ * All string identifier should be allocated using this,
+ * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure
+ * that for example different functions don't wrongly assign different
+ * meanings to the same identifier.
*/
int usb_string_id(struct usb_composite_dev *cdev)
{
if (cdev->next_string_id < 254) {
- /* string id 0 is reserved */
+ /* string id 0 is reserved by USB spec for list of
+ * supported languages */
+ /* 255 reserved as well? -- mina86 */
cdev->next_string_id++;
return cdev->next_string_id;
}
return -ENODEV;
}
+/**
+ * usb_string_ids() - allocate unused string IDs in batch
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * @str: an array of usb_string objects to assign numbers to
+ * Context: single threaded during gadget setup
+ *
+ * @usb_string_ids() is called from bind() callbacks to allocate
+ * string IDs. Drivers for functions, configurations, or gadgets will
+ * then copy IDs from the string table to the appropriate descriptors
+ * and string table for other languages.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str)
+{
+ int next = cdev->next_string_id;
+
+ for (; str->s; ++str) {
+ if (unlikely(next >= 254))
+ return -ENODEV;
+ str->id = ++next;
+ }
+
+ cdev->next_string_id = next;
+
+ return 0;
+}
+
+/**
+ * usb_string_ids_n() - allocate unused string IDs in batch
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * @n: number of string IDs to allocate
+ * Context: single threaded during gadget setup
+ *
+ * Returns the first requested ID. This ID and next @n-1 IDs are now
+ * valid IDs. At least providind that @n is non zore because if it
+ * is, returns last requested ID which is now very useful information.
+ *
+ * @usb_string_ids_n() is called from bind() callbacks to allocate
+ * string IDs. Drivers for functions, configurations, or gadgets will
+ * then store that ID in the appropriate descriptors and string table.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
+{
+ unsigned next = c->next_string_id;
+ if (unlikely(n > 254 || (unsigned)next + n > 254))
+ return -ENODEV;
+ c->next_string_id += n;
+ return next + 1;
+}
+
+
/*-------------------------------------------------------------------------*/
static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
spin_lock_irqsave(&cdev->lock, flags);
if (cdev->config)
reset_config(cdev);
+ if (composite->disconnect)
+ composite->disconnect(cdev);
spin_unlock_irqrestore(&cdev->lock, flags);
}
--- /dev/null
+/*
+ * dbgp.c -- EHCI Debug Port device gadget
+ *
+ * Copyright (C) 2010 Stephane Duverger
+ *
+ * Released under the GPLv2.
+ *
+ */
+
+/* verbose messages */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* See comments in "zero.c" */
+#include "epautoconf.c"
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+#include "u_serial.c"
+#endif
+
+#define DRIVER_VENDOR_ID 0x0525 /* NetChip */
+#define DRIVER_PRODUCT_ID 0xc0de /* undefined */
+
+#define USB_DEBUG_MAX_PACKET_SIZE 8
+#define DBGP_REQ_EP0_LEN 128
+#define DBGP_REQ_LEN 512
+
+static struct dbgp {
+ struct usb_gadget *gadget;
+ struct usb_request *req;
+ struct usb_ep *i_ep;
+ struct usb_ep *o_ep;
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+ struct gserial *serial;
+#endif
+} dbgp;
+
+static struct usb_device_descriptor device_desc = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
+ .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_ID),
+ .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_ID),
+ .bNumConfigurations = 1,
+};
+
+static struct usb_debug_descriptor dbg_desc = {
+ .bLength = sizeof dbg_desc,
+ .bDescriptorType = USB_DT_DEBUG,
+};
+
+static struct usb_endpoint_descriptor i_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .bEndpointAddress = USB_DIR_IN,
+};
+
+static struct usb_endpoint_descriptor o_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .bEndpointAddress = USB_DIR_OUT,
+};
+
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+static int dbgp_consume(char *buf, unsigned len)
+{
+ char c;
+
+ if (!len)
+ return 0;
+
+ c = buf[len-1];
+ if (c != 0)
+ buf[len-1] = 0;
+
+ printk(KERN_NOTICE "%s%c", buf, c);
+ return 0;
+}
+
+static void __disable_ep(struct usb_ep *ep)
+{
+ if (ep && ep->driver_data == dbgp.gadget) {
+ usb_ep_disable(ep);
+ ep->driver_data = NULL;
+ }
+}
+
+static void dbgp_disable_ep(void)
+{
+ __disable_ep(dbgp.i_ep);
+ __disable_ep(dbgp.o_ep);
+}
+
+static void dbgp_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ int stp;
+ int err = 0;
+ int status = req->status;
+
+ if (ep == dbgp.i_ep) {
+ stp = 1;
+ goto fail;
+ }
+
+ if (status != 0) {
+ stp = 2;
+ goto release_req;
+ }
+
+ dbgp_consume(req->buf, req->actual);
+
+ req->length = DBGP_REQ_LEN;
+ err = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (err < 0) {
+ stp = 3;
+ goto release_req;
+ }
+
+ return;
+
+release_req:
+ kfree(req->buf);
+ usb_ep_free_request(dbgp.o_ep, req);
+ dbgp_disable_ep();
+fail:
+ dev_dbg(&dbgp.gadget->dev,
+ "complete: failure (%d:%d) ==> %d\n", stp, err, status);
+}
+
+static int dbgp_enable_ep_req(struct usb_ep *ep)
+{
+ int err, stp;
+ struct usb_request *req;
+
+ req = usb_ep_alloc_request(ep, GFP_KERNEL);
+ if (!req) {
+ err = -ENOMEM;
+ stp = 1;
+ goto fail_1;
+ }
+
+ req->buf = kmalloc(DBGP_REQ_LEN, GFP_KERNEL);
+ if (!req->buf) {
+ err = -ENOMEM;
+ stp = 2;
+ goto fail_2;
+ }
+
+ req->complete = dbgp_complete;
+ req->length = DBGP_REQ_LEN;
+ err = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (err < 0) {
+ stp = 3;
+ goto fail_3;
+ }
+
+ return 0;
+
+fail_3:
+ kfree(req->buf);
+fail_2:
+ usb_ep_free_request(dbgp.o_ep, req);
+fail_1:
+ dev_dbg(&dbgp.gadget->dev,
+ "enable ep req: failure (%d:%d)\n", stp, err);
+ return err;
+}
+
+static int __enable_ep(struct usb_ep *ep, struct usb_endpoint_descriptor *desc)
+{
+ int err = usb_ep_enable(ep, desc);
+ ep->driver_data = dbgp.gadget;
+ return err;
+}
+
+static int dbgp_enable_ep(void)
+{
+ int err, stp;
+
+ err = __enable_ep(dbgp.i_ep, &i_desc);
+ if (err < 0) {
+ stp = 1;
+ goto fail_1;
+ }
+
+ err = __enable_ep(dbgp.o_ep, &o_desc);
+ if (err < 0) {
+ stp = 2;
+ goto fail_2;
+ }
+
+ err = dbgp_enable_ep_req(dbgp.o_ep);
+ if (err < 0) {
+ stp = 3;
+ goto fail_3;
+ }
+
+ return 0;
+
+fail_3:
+ __disable_ep(dbgp.o_ep);
+fail_2:
+ __disable_ep(dbgp.i_ep);
+fail_1:
+ dev_dbg(&dbgp.gadget->dev, "enable ep: failure (%d:%d)\n", stp, err);
+ return err;
+}
+#endif
+
+static void dbgp_disconnect(struct usb_gadget *gadget)
+{
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+ dbgp_disable_ep();
+#else
+ gserial_disconnect(dbgp.serial);
+#endif
+}
+
+static void dbgp_unbind(struct usb_gadget *gadget)
+{
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+ kfree(dbgp.serial);
+#endif
+ if (dbgp.req) {
+ kfree(dbgp.req->buf);
+ usb_ep_free_request(gadget->ep0, dbgp.req);
+ }
+
+ gadget->ep0->driver_data = NULL;
+}
+
+static int __init dbgp_configure_endpoints(struct usb_gadget *gadget)
+{
+ int stp;
+
+ usb_ep_autoconfig_reset(gadget);
+
+ dbgp.i_ep = usb_ep_autoconfig(gadget, &i_desc);
+ if (!dbgp.i_ep) {
+ stp = 1;
+ goto fail_1;
+ }
+
+ dbgp.i_ep->driver_data = gadget;
+ i_desc.wMaxPacketSize =
+ __constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE);
+
+ dbgp.o_ep = usb_ep_autoconfig(gadget, &o_desc);
+ if (!dbgp.o_ep) {
+ dbgp.i_ep->driver_data = NULL;
+ stp = 2;
+ goto fail_2;
+ }
+
+ dbgp.o_ep->driver_data = gadget;
+ o_desc.wMaxPacketSize =
+ __constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE);
+
+ dbg_desc.bDebugInEndpoint = i_desc.bEndpointAddress & 0x7f;
+ dbg_desc.bDebugOutEndpoint = o_desc.bEndpointAddress & 0x7f;
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+ dbgp.serial->in = dbgp.i_ep;
+ dbgp.serial->out = dbgp.o_ep;
+
+ dbgp.serial->in_desc = &i_desc;
+ dbgp.serial->out_desc = &o_desc;
+
+ if (gserial_setup(gadget, 1) < 0) {
+ stp = 3;
+ goto fail_3;
+ }
+
+ return 0;
+
+fail_3:
+ dbgp.o_ep->driver_data = NULL;
+#else
+ return 0;
+#endif
+fail_2:
+ dbgp.i_ep->driver_data = NULL;
+fail_1:
+ dev_dbg(&dbgp.gadget->dev, "ep config: failure (%d)\n", stp);
+ return -ENODEV;
+}
+
+static int __init dbgp_bind(struct usb_gadget *gadget)
+{
+ int err, stp;
+
+ dbgp.gadget = gadget;
+
+ dbgp.req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
+ if (!dbgp.req) {
+ err = -ENOMEM;
+ stp = 1;
+ goto fail;
+ }
+
+ dbgp.req->buf = kmalloc(DBGP_REQ_EP0_LEN, GFP_KERNEL);
+ if (!dbgp.req->buf) {
+ err = -ENOMEM;
+ stp = 2;
+ goto fail;
+ }
+
+ dbgp.req->length = DBGP_REQ_EP0_LEN;
+ gadget->ep0->driver_data = gadget;
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+ dbgp.serial = kzalloc(sizeof(struct gserial), GFP_KERNEL);
+ if (!dbgp.serial) {
+ stp = 3;
+ err = -ENOMEM;
+ goto fail;
+ }
+#endif
+ err = dbgp_configure_endpoints(gadget);
+ if (err < 0) {
+ stp = 4;
+ goto fail;
+ }
+
+ dev_dbg(&dbgp.gadget->dev, "bind: success\n");
+ return 0;
+
+fail:
+ dev_dbg(&gadget->dev, "bind: failure (%d:%d)\n", stp, err);
+ dbgp_unbind(gadget);
+ return err;
+}
+
+static void dbgp_setup_complete(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ dev_dbg(&dbgp.gadget->dev, "setup complete: %d, %d/%d\n",
+ req->status, req->actual, req->length);
+}
+
+static int dbgp_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_request *req = dbgp.req;
+ u8 request = ctrl->bRequest;
+ u16 value = le16_to_cpu(ctrl->wValue);
+ u16 length = le16_to_cpu(ctrl->wLength);
+ int err = 0;
+ void *data;
+ u16 len;
+
+ gadget->ep0->driver_data = gadget;
+
+ if (request == USB_REQ_GET_DESCRIPTOR) {
+ switch (value>>8) {
+ case USB_DT_DEVICE:
+ dev_dbg(&dbgp.gadget->dev, "setup: desc device\n");
+ len = sizeof device_desc;
+ data = &device_desc;
+ break;
+ case USB_DT_DEBUG:
+ dev_dbg(&dbgp.gadget->dev, "setup: desc debug\n");
+ len = sizeof dbg_desc;
+ data = &dbg_desc;
+ break;
+ default:
+ goto fail;
+ }
+ } else if (request == USB_REQ_SET_FEATURE &&
+ value == USB_DEVICE_DEBUG_MODE) {
+ len = 0;
+ data = NULL;
+ dev_dbg(&dbgp.gadget->dev, "setup: feat debug\n");
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+ err = dbgp_enable_ep();
+#else
+ err = gserial_connect(dbgp.serial, 0);
+#endif
+ if (err < 0)
+ goto fail;
+ } else
+ goto fail;
+
+ if (len >= 0) {
+ req->length = min(length, len);
+ req->zero = len < req->length;
+ if (data && req->length)
+ memcpy(req->buf, data, req->length);
+
+ req->complete = dbgp_setup_complete;
+ return usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
+ }
+
+fail:
+ dev_dbg(&dbgp.gadget->dev,
+ "setup: failure req %x v %x\n", request, value);
+ return err;
+}
+
+static struct usb_gadget_driver dbgp_driver = {
+ .function = "dbgp",
+ .speed = USB_SPEED_HIGH,
+ .bind = dbgp_bind,
+ .unbind = dbgp_unbind,
+ .setup = dbgp_setup,
+ .disconnect = dbgp_disconnect,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "dbgp"
+ },
+};
+
+static int __init dbgp_init(void)
+{
+ return usb_gadget_register_driver(&dbgp_driver);
+}
+
+static void __exit dbgp_exit(void)
+{
+ usb_gadget_unregister_driver(&dbgp_driver);
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+ gserial_cleanup();
+#endif
+}
+
+MODULE_AUTHOR("Stephane Duverger");
+MODULE_LICENSE("GPL");
+module_init(dbgp_init);
+module_exit(dbgp_exit);
dum = hcd_to_dummy (hcd);
spin_lock_irqsave (&dum->lock, flags);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
goto done;
if (dum->resuming && time_after_eq (jiffies, dum->re_timeout)) {
int retval = 0;
unsigned long flags;
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
return -ETIMEDOUT;
dum = hcd_to_dummy (hcd);
dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__);
spin_lock_irq (&dum->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
rc = -ESHUTDOWN;
} else {
dum->rh_state = DUMMY_RH_RUNNING;
* the first one present. That's to make Microsoft's drivers happy,
* and to follow DOCSIS 1.0 (cable modem standard).
*/
-static int __init rndis_do_config(struct usb_configuration *c)
+static int __ref rndis_do_config(struct usb_configuration *c)
{
/* FIXME alloc iConfiguration string, set it in c->strings */
/*
* We _always_ have an ECM, CDC Subset, or EEM configuration.
*/
-static int __init eth_do_config(struct usb_configuration *c)
+static int __ref eth_do_config(struct usb_configuration *c)
{
/* FIXME alloc iConfiguration string, set it in c->strings */
/*-------------------------------------------------------------------------*/
-static int __init eth_bind(struct usb_composite_dev *cdev)
+static int __ref eth_bind(struct usb_composite_dev *cdev)
{
int gcnum;
struct usb_gadget *gadget = cdev->gadget;
struct ffs_function *func = ffs->func;
ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV;
} else if (gadget->ops->ioctl) {
- lock_kernel();
ret = gadget->ops->ioctl(gadget, code, value);
- unlock_kernel();
} else {
ret = -ENOTTY;
}
static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
{
- unsigned i, count;
+ struct usb_gadget_strings **lang;
+ int first_id;
ENTER();
|| test_and_set_bit(FFS_FL_BOUND, &ffs->flags)))
return -EBADFD;
- ffs_data_get(ffs);
+ first_id = usb_string_ids_n(cdev, ffs->strings_count);
+ if (unlikely(first_id < 0))
+ return first_id;
ffs->ep0req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
if (unlikely(!ffs->ep0req))
ffs->ep0req->complete = ffs_ep0_complete;
ffs->ep0req->context = ffs;
- /* Get strings identifiers */
- for (count = ffs->strings_count, i = 0; i < count; ++i) {
- struct usb_gadget_strings **lang;
-
- int id = usb_string_id(cdev);
- if (unlikely(id < 0)) {
- usb_ep_free_request(cdev->gadget->ep0, ffs->ep0req);
- ffs->ep0req = NULL;
- return id;
- }
-
- lang = ffs->stringtabs;
- do {
- (*lang)->strings[i].id = id;
- ++lang;
- } while (*lang);
+ lang = ffs->stringtabs;
+ for (lang = ffs->stringtabs; *lang; ++lang) {
+ struct usb_string *str = (*lang)->strings;
+ int id = first_id;
+ for (; str->s; ++id, ++str)
+ str->id = id;
}
ffs->gadget = cdev->gadget;
+ ffs_data_get(ffs);
return 0;
}
}
-static int functionfs_add(struct usb_composite_dev *cdev,
- struct usb_configuration *c,
- struct ffs_data *ffs)
+static int functionfs_bind_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *c,
+ struct ffs_data *ffs)
{
struct ffs_function *func;
int ret;
static ssize_t f_hidg_read(struct file *file, char __user *buffer,
size_t count, loff_t *ptr)
{
- struct f_hidg *hidg = (struct f_hidg *)file->private_data;
+ struct f_hidg *hidg = file->private_data;
char *tmp_buff = NULL;
unsigned long flags;
static ssize_t f_hidg_write(struct file *file, const char __user *buffer,
size_t count, loff_t *offp)
{
- struct f_hidg *hidg = (struct f_hidg *)file->private_data;
+ struct f_hidg *hidg = file->private_data;
ssize_t status = -ENOMEM;
if (!access_ok(VERIFY_READ, buffer, count))
static unsigned int f_hidg_poll(struct file *file, poll_table *wait)
{
- struct f_hidg *hidg = (struct f_hidg *)file->private_data;
+ struct f_hidg *hidg = file->private_data;
unsigned int ret = 0;
poll_wait(file, &hidg->read_queue, wait);
/*-------------------------------------------------------------------------*/
-static int __init loopback_bind_config(struct usb_configuration *c)
+static int __ref loopback_bind_config(struct usb_configuration *c)
{
struct f_loopback *loop;
int status;
return status;
}
-static struct usb_configuration loopback_driver = {
+static struct usb_configuration loopback_driver = {
.label = "loopback",
.strings = loopback_strings,
.bind = loopback_bind_config,
/*-------------------------------------------------------------------------*/
struct fsg_dev;
+struct fsg_common;
+
+/* FSF callback functions */
+struct fsg_operations {
+ /* Callback function to call when thread exits. If no
+ * callback is set or it returns value lower then zero MSF
+ * will force eject all LUNs it operates on (including those
+ * marked as non-removable or with prevent_medium_removal flag
+ * set). */
+ int (*thread_exits)(struct fsg_common *common);
+
+ /* Called prior to ejection. Negative return means error,
+ * zero means to continue with ejection, positive means not to
+ * eject. */
+ int (*pre_eject)(struct fsg_common *common,
+ struct fsg_lun *lun, int num);
+ /* Called after ejection. Negative return means error, zero
+ * or positive is just a success. */
+ int (*post_eject)(struct fsg_common *common,
+ struct fsg_lun *lun, int num);
+};
/* Data shared by all the FSG instances. */
struct usb_ep *ep0; /* Copy of gadget->ep0 */
struct usb_request *ep0req; /* Copy of cdev->req */
unsigned int ep0_req_tag;
- const char *ep0req_name;
struct fsg_buffhd *next_buffhd_to_fill;
struct fsg_buffhd *next_buffhd_to_drain;
struct completion thread_notifier;
struct task_struct *thread_task;
- /* Callback function to call when thread exits. */
- int (*thread_exits)(struct fsg_common *common);
+ /* Callback functions. */
+ const struct fsg_operations *ops;
/* Gadget's private data. */
void *private_data;
const char *lun_name_format;
const char *thread_name;
- /* Callback function to call when thread exits. If no
- * callback is set or it returns value lower then zero MSF
- * will force eject all LUNs it operates on (including those
- * marked as non-removable or with prevent_medium_removal flag
- * set). */
- int (*thread_exits)(struct fsg_common *common);
+ /* Callback functions. */
+ const struct fsg_operations *ops;
/* Gadget's private data. */
void *private_data;
if (common->fsg)
return 1;
ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
+ WARN_ON(1);
return 0;
}
/* Respond with data/status */
req->length = min((u16)1, w_length);
- fsg->common->ep0req_name =
- ctrl->bRequestType & USB_DIR_IN ? "ep0-in" : "ep0-out";
return ep0_queue(fsg->common);
}
} else if (!curlun->removable) {
curlun->sense_data = SS_INVALID_COMMAND;
return -EINVAL;
- }
-
- loej = common->cmnd[4] & 0x02;
- start = common->cmnd[4] & 0x01;
-
- /* eject code from file_storage.c:do_start_stop() */
-
- if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
- (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
+ } else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
+ (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
return -EINVAL;
}
- if (!start) {
- /* Are we allowed to unload the media? */
- if (curlun->prevent_medium_removal) {
- LDBG(curlun, "unload attempt prevented\n");
- curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
- return -EINVAL;
- }
- if (loej) { /* Simulate an unload/eject */
- up_read(&common->filesem);
- down_write(&common->filesem);
- fsg_lun_close(curlun);
- up_write(&common->filesem);
- down_read(&common->filesem);
- }
- } else {
+ loej = common->cmnd[4] & 0x02;
+ start = common->cmnd[4] & 0x01;
- /* Our emulation doesn't support mounting; the medium is
- * available for use as soon as it is loaded. */
+ /* Our emulation doesn't support mounting; the medium is
+ * available for use as soon as it is loaded. */
+ if (start) {
if (!fsg_lun_is_open(curlun)) {
curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
return -EINVAL;
}
+ return 0;
}
- return 0;
+
+ /* Are we allowed to unload the media? */
+ if (curlun->prevent_medium_removal) {
+ LDBG(curlun, "unload attempt prevented\n");
+ curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
+ return -EINVAL;
+ }
+
+ if (!loej)
+ return 0;
+
+ /* Simulate an unload/eject */
+ if (common->ops && common->ops->pre_eject) {
+ int r = common->ops->pre_eject(common, curlun,
+ curlun - common->luns);
+ if (unlikely(r < 0))
+ return r;
+ else if (r)
+ return 0;
+ }
+
+ up_read(&common->filesem);
+ down_write(&common->filesem);
+ fsg_lun_close(curlun);
+ up_write(&common->filesem);
+ down_read(&common->filesem);
+
+ return common->ops && common->ops->post_eject
+ ? min(0, common->ops->post_eject(common, curlun,
+ curlun - common->luns))
+ : 0;
}
common->thread_task = NULL;
spin_unlock_irq(&common->lock);
- if (!common->thread_exits || common->thread_exits(common) < 0) {
+ if (!common->ops || !common->ops->thread_exits
+ || common->ops->thread_exits(common) < 0) {
struct fsg_lun *curlun = common->luns;
unsigned i = common->nluns;
common->free_storage_on_release = 0;
}
+ common->ops = cfg->ops;
common->private_data = cfg->private_data;
common->gadget = gadget;
/* Tell the thread to start working */
- common->thread_exits = cfg->thread_exits;
common->thread_task =
kthread_create(fsg_main_thread, common,
OR(cfg->thread_name, "file-storage"));
NULL,
};
-static int fsg_add(struct usb_composite_dev *cdev,
- struct usb_configuration *c,
- struct fsg_common *common)
+static int fsg_bind_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *c,
+ struct fsg_common *common)
{
struct fsg_dev *fsg;
int rc;
return rc;
}
+static inline int __deprecated __maybe_unused
+fsg_add(struct usb_composite_dev *cdev,
+ struct usb_configuration *c,
+ struct fsg_common *common)
+{
+ return fsg_bind_config(cdev, c, common);
+}
/************************* Module parameters *************************/
cfg->product_name = 0;
cfg->release = 0xffff;
- cfg->thread_exits = 0;
- cfg->private_data = 0;
+ cfg->ops = NULL;
+ cfg->private_data = NULL;
/* Finalise */
cfg->can_stall = params->stall;
/*-------------------------------------------------------------------------*/
-static int __init sourcesink_bind_config(struct usb_configuration *c)
+static int __ref sourcesink_bind_config(struct usb_configuration *c)
{
struct f_sourcesink *ss;
int status;
* following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
* UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
* the optional "protocol" module parameter. In addition, the default
- * Vendor ID, Product ID, and release number can be overridden.
+ * Vendor ID, Product ID, release number and serial number can be overridden.
*
* There is support for multiple logical units (LUNs), each of which has
* its own backing file. The number of LUNs can be set using the optional
* removable Default false, boolean for removable media
* luns=N Default N = number of filenames, number of
* LUNs to support
+ * nofua=b[,b...] Default false, booleans for ignore FUA flag
+ * in SCSI WRITE(10,12) commands
* stall Default determined according to the type of
* USB device controller (usually true),
* boolean to permit the driver to halt
* vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID
* product=0xPPPP Default 0xa4a5 (FSG), USB Product ID
* release=0xRRRR Override the USB release number (bcdDevice)
+ * serial=HHHH... Override serial number (string of hex chars)
* buflen=N Default N=16384, buffer size used (will be
* rounded down to a multiple of
* PAGE_CACHE_SIZE)
*
* If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "ro",
- * "removable", "luns", "stall", and "cdrom" options are available; default
- * values are used for everything else.
+ * "removable", "luns", "nofua", "stall", and "cdrom" options are available;
+ * default values are used for everything else.
*
* The pathnames of the backing files and the ro settings are available in
- * the attribute files "file" and "ro" in the lun<n> subdirectory of the
- * gadget's sysfs directory. If the "removable" option is set, writing to
+ * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of
+ * the gadget's sysfs directory. If the "removable" option is set, writing to
* these files will simulate ejecting/loading the medium (writing an empty
* line means eject) and adjusting a write-enable tab. Changes to the ro
* setting are not allowed when the medium is loaded or if CD-ROM emulation
#define DRIVER_DESC "File-backed Storage Gadget"
#define DRIVER_NAME "g_file_storage"
+/* DRIVER_VERSION must be at least 6 characters long, as it is used
+ * to generate a fallback serial number. */
#define DRIVER_VERSION "20 November 2008"
static char fsg_string_manufacturer[64];
static struct {
char *file[FSG_MAX_LUNS];
int ro[FSG_MAX_LUNS];
+ int nofua[FSG_MAX_LUNS];
unsigned int num_filenames;
unsigned int num_ros;
+ unsigned int num_nofuas;
unsigned int nluns;
int removable;
unsigned short vendor;
unsigned short product;
unsigned short release;
+ char *serial;
unsigned int buflen;
int transport_type;
module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
MODULE_PARM_DESC(ro, "true to force read-only");
+module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas,
+ S_IRUGO);
+MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit");
+
module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
MODULE_PARM_DESC(luns, "number of LUNs");
module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO);
MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk");
+module_param_named(serial, mod_data.serial, charp, S_IRUGO);
+MODULE_PARM_DESC(serial, "USB serial number");
/* In the non-TEST version, only the module parameters listed above
* are available. */
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
return -EINVAL;
}
- if (fsg->cmnd[1] & 0x08) { // FUA
+ /* FUA */
+ if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) {
spin_lock(&curlun->filp->f_lock);
curlun->filp->f_flags |= O_DSYNC;
spin_unlock(&curlun->filp->f_lock);
/* The write permissions and store_xxx pointers are set in fsg_bind() */
static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL);
+static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL);
static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
{
int prot;
int gcnum;
+ int i;
/* Store the default values */
mod_data.transport_type = USB_PR_BULK;
ERROR(fsg, "invalid buflen\n");
return -ETOOSMALL;
}
+
#endif /* CONFIG_USB_FILE_STORAGE_TEST */
+ /* Serial string handling.
+ * On a real device, the serial string would be loaded
+ * from permanent storage. */
+ if (mod_data.serial) {
+ const char *ch;
+ unsigned len = 0;
+
+ /* Sanity check :
+ * The CB[I] specification limits the serial string to
+ * 12 uppercase hexadecimal characters.
+ * BBB need at least 12 uppercase hexadecimal characters,
+ * with a maximum of 126. */
+ for (ch = mod_data.serial; *ch; ++ch) {
+ ++len;
+ if ((*ch < '0' || *ch > '9') &&
+ (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
+ WARNING(fsg,
+ "Invalid serial string character: %c; "
+ "Failing back to default\n",
+ *ch);
+ goto fill_serial;
+ }
+ }
+ if (len > 126 ||
+ (mod_data.transport_type == USB_PR_BULK && len < 12) ||
+ (mod_data.transport_type != USB_PR_BULK && len > 12)) {
+ WARNING(fsg,
+ "Invalid serial string length; "
+ "Failing back to default\n");
+ goto fill_serial;
+ }
+ fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial;
+ } else {
+ WARNING(fsg,
+ "Userspace failed to provide serial number; "
+ "Failing back to default\n");
+fill_serial:
+ /* Serial number not specified or invalid, make our own.
+ * We just encode it from the driver version string,
+ * 12 characters to comply with both CB[I] and BBB spec.
+ * Warning : Two devices running the same kernel will have
+ * the same fallback serial number. */
+ for (i = 0; i < 12; i += 2) {
+ unsigned char c = DRIVER_VERSION[i / 2];
+
+ if (!c)
+ break;
+ sprintf(&fsg_string_serial[i], "%02X", c);
+ }
+ }
+
return 0;
}
-static int __init fsg_bind(struct usb_gadget *gadget)
+static int __ref fsg_bind(struct usb_gadget *gadget)
{
struct fsg_dev *fsg = the_fsg;
int rc;
}
}
+ /* Only for removable media? */
+ dev_attr_nofua.attr.mode = 0644;
+ dev_attr_nofua.store = fsg_store_nofua;
+
/* Find out how many LUNs there should be */
i = mod_data.nluns;
if (i == 0)
curlun->ro = mod_data.cdrom || mod_data.ro[i];
curlun->initially_ro = curlun->ro;
curlun->removable = mod_data.removable;
+ curlun->nofua = mod_data.nofua[i];
curlun->dev.release = lun_release;
curlun->dev.parent = &gadget->dev;
curlun->dev.driver = &fsg_driver.driver;
}
if ((rc = device_create_file(&curlun->dev,
&dev_attr_ro)) != 0 ||
+ (rc = device_create_file(&curlun->dev,
+ &dev_attr_nofua)) != 0 ||
(rc = device_create_file(&curlun->dev,
&dev_attr_file)) != 0) {
device_unregister(&curlun->dev);
init_utsname()->sysname, init_utsname()->release,
gadget->name);
- /* On a real device, serial[] would be loaded from permanent
- * storage. We just encode it from the driver version string. */
- for (i = 0; i < sizeof fsg_string_serial - 2; i += 2) {
- unsigned char c = DRIVER_VERSION[i / 2];
-
- if (!c)
- break;
- sprintf(&fsg_string_serial[i], "%02X", c);
- }
-
fsg->thread_task = kthread_create(fsg_main_thread, fsg,
"file-storage-gadget");
if (IS_ERR(fsg->thread_task)) {
if (IS_ERR(p))
p = NULL;
}
- LINFO(curlun, "ro=%d, file: %s\n",
- curlun->ro, (p ? p : "(error)"));
+ LINFO(curlun, "ro=%d, nofua=%d, file: %s\n",
+ curlun->ro, curlun->nofua, (p ? p : "(error)"));
}
}
kfree(pathbuf);
EXPORT_SYMBOL(usb_gadget_unregister_driver);
/* udc structure's alloc and setup, include ep-param alloc */
-static struct qe_udc __devinit *qe_udc_config(struct of_device *ofdev)
+static struct qe_udc __devinit *qe_udc_config(struct platform_device *ofdev)
{
struct qe_udc *udc;
struct device_node *np = ofdev->dev.of_node;
}
/* Driver probe functions */
-static int __devinit qe_udc_probe(struct of_device *ofdev,
+static int __devinit qe_udc_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
}
#ifdef CONFIG_PM
-static int qe_udc_suspend(struct of_device *dev, pm_message_t state)
+static int qe_udc_suspend(struct platform_device *dev, pm_message_t state)
{
return -ENOTSUPP;
}
-static int qe_udc_resume(struct of_device *dev)
+static int qe_udc_resume(struct platform_device *dev)
{
return -ENOTSUPP;
}
#endif
-static int __devexit qe_udc_remove(struct of_device *ofdev)
+static int __devexit qe_udc_remove(struct platform_device *ofdev)
{
struct qe_ep *ep;
unsigned int size;
# include "u_ether.c"
static u8 gfs_hostaddr[ETH_ALEN];
-#else
-# if !defined CONFIG_USB_FUNCTIONFS_GENERIC
-# define CONFIG_USB_FUNCTIONFS_GENERIC
+# ifdef CONFIG_USB_FUNCTIONFS_ETH
+static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
# endif
+#else
# define gether_cleanup() do { } while (0)
# define gether_setup(gadget, hostaddr) ((int)0)
+# define gfs_hostaddr NULL
#endif
#include "f_fs.c"
enum {
GFS_STRING_MANUFACTURER_IDX,
GFS_STRING_PRODUCT_IDX,
-#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
- GFS_STRING_RNDIS_CONFIG_IDX,
-#endif
-#ifdef CONFIG_USB_FUNCTIONFS_ETH
- GFS_STRING_ECM_CONFIG_IDX,
-#endif
-#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
- GFS_STRING_GENERIC_CONFIG_IDX,
-#endif
+ GFS_STRING_FIRST_CONFIG_IDX,
};
static char gfs_manufacturer[50];
[GFS_STRING_MANUFACTURER_IDX].s = gfs_manufacturer,
[GFS_STRING_PRODUCT_IDX].s = gfs_driver_desc,
#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
- [GFS_STRING_RNDIS_CONFIG_IDX].s = "FunctionFS + RNDIS",
+ { .s = "FunctionFS + RNDIS" },
#endif
#ifdef CONFIG_USB_FUNCTIONFS_ETH
- [GFS_STRING_ECM_CONFIG_IDX].s = "FunctionFS + ECM",
+ { .s = "FunctionFS + ECM" },
#endif
#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
- [GFS_STRING_GENERIC_CONFIG_IDX].s = "FunctionFS",
+ { .s = "FunctionFS" },
#endif
{ } /* end of list */
};
};
+
+struct gfs_configuration {
+ struct usb_configuration c;
+ int (*eth)(struct usb_configuration *c, u8 *ethaddr);
+} gfs_configurations[] = {
#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
-static int gfs_do_rndis_config(struct usb_configuration *c);
-
-static struct usb_configuration gfs_rndis_config_driver = {
- .label = "FunctionFS + RNDIS",
- .bind = gfs_do_rndis_config,
- .bConfigurationValue = 1,
- /* .iConfiguration = DYNAMIC */
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
-};
-# define gfs_add_rndis_config(cdev) \
- usb_add_config(cdev, &gfs_rndis_config_driver)
-#else
-# define gfs_add_rndis_config(cdev) 0
+ {
+ .eth = rndis_bind_config,
+ },
#endif
-
#ifdef CONFIG_USB_FUNCTIONFS_ETH
-static int gfs_do_ecm_config(struct usb_configuration *c);
-
-static struct usb_configuration gfs_ecm_config_driver = {
- .label = "FunctionFS + ECM",
- .bind = gfs_do_ecm_config,
- .bConfigurationValue = 1,
- /* .iConfiguration = DYNAMIC */
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
-};
-# define gfs_add_ecm_config(cdev) \
- usb_add_config(cdev, &gfs_ecm_config_driver)
-#else
-# define gfs_add_ecm_config(cdev) 0
+ {
+ .eth = eth_bind_config,
+ },
#endif
-
#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
-static int gfs_do_generic_config(struct usb_configuration *c);
-
-static struct usb_configuration gfs_generic_config_driver = {
- .label = "FunctionFS",
- .bind = gfs_do_generic_config,
- .bConfigurationValue = 2,
- /* .iConfiguration = DYNAMIC */
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
-};
-# define gfs_add_generic_config(cdev) \
- usb_add_config(cdev, &gfs_generic_config_driver)
-#else
-# define gfs_add_generic_config(cdev) 0
+ {
+ },
#endif
+};
static int gfs_bind(struct usb_composite_dev *cdev);
static int gfs_unbind(struct usb_composite_dev *cdev);
+static int gfs_do_config(struct usb_configuration *c);
static struct usb_composite_driver gfs_driver = {
.name = gfs_short_name,
static int gfs_bind(struct usb_composite_dev *cdev)
{
- int ret;
+ int ret, i;
ENTER();
snprintf(gfs_manufacturer, sizeof gfs_manufacturer, "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
cdev->gadget->name);
- ret = usb_string_id(cdev);
- if (unlikely(ret < 0))
- goto error;
- gfs_strings[GFS_STRING_MANUFACTURER_IDX].id = ret;
- gfs_dev_desc.iManufacturer = ret;
-
- ret = usb_string_id(cdev);
- if (unlikely(ret < 0))
- goto error;
- gfs_strings[GFS_STRING_PRODUCT_IDX].id = ret;
- gfs_dev_desc.iProduct = ret;
-
-#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
- ret = usb_string_id(cdev);
- if (unlikely(ret < 0))
- goto error;
- gfs_strings[GFS_STRING_RNDIS_CONFIG_IDX].id = ret;
- gfs_rndis_config_driver.iConfiguration = ret;
-#endif
-#ifdef CONFIG_USB_FUNCTIONFS_ETH
- ret = usb_string_id(cdev);
+ ret = usb_string_ids_tab(cdev, gfs_strings);
if (unlikely(ret < 0))
goto error;
- gfs_strings[GFS_STRING_ECM_CONFIG_IDX].id = ret;
- gfs_ecm_config_driver.iConfiguration = ret;
-#endif
-#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
- ret = usb_string_id(cdev);
- if (unlikely(ret < 0))
- goto error;
- gfs_strings[GFS_STRING_GENERIC_CONFIG_IDX].id = ret;
- gfs_generic_config_driver.iConfiguration = ret;
-#endif
+ gfs_dev_desc.iManufacturer = gfs_strings[GFS_STRING_MANUFACTURER_IDX].id;
+ gfs_dev_desc.iProduct = gfs_strings[GFS_STRING_PRODUCT_IDX].id;
ret = functionfs_bind(gfs_ffs_data, cdev);
if (unlikely(ret < 0))
goto error;
- ret = gfs_add_rndis_config(cdev);
- if (unlikely(ret < 0))
- goto error_unbind;
+ for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) {
+ struct gfs_configuration *c = gfs_configurations + i;
- ret = gfs_add_ecm_config(cdev);
- if (unlikely(ret < 0))
- goto error_unbind;
+ ret = GFS_STRING_FIRST_CONFIG_IDX + i;
+ c->c.label = gfs_strings[ret].s;
+ c->c.iConfiguration = gfs_strings[ret].id;
+ c->c.bind = gfs_do_config;
+ c->c.bConfigurationValue = 1 + i;
+ c->c.bmAttributes = USB_CONFIG_ATT_SELFPOWER;
- ret = gfs_add_generic_config(cdev);
- if (unlikely(ret < 0))
- goto error_unbind;
+ ret = usb_add_config(cdev, &c->c);
+ if (unlikely(ret < 0))
+ goto error_unbind;
+ }
return 0;
}
-static int __gfs_do_config(struct usb_configuration *c,
- int (*eth)(struct usb_configuration *c, u8 *ethaddr),
- u8 *ethaddr)
+static int gfs_do_config(struct usb_configuration *c)
{
+ struct gfs_configuration *gc =
+ container_of(c, struct gfs_configuration, c);
int ret;
if (WARN_ON(!gfs_ffs_data))
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- if (eth) {
- ret = eth(c, ethaddr);
+ if (gc->eth) {
+ ret = gc->eth(c, gfs_hostaddr);
if (unlikely(ret < 0))
return ret;
}
- ret = functionfs_add(c->cdev, c, gfs_ffs_data);
+ ret = functionfs_bind_config(c->cdev, c, gfs_ffs_data);
if (unlikely(ret < 0))
return ret;
return 0;
}
-#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
-static int gfs_do_rndis_config(struct usb_configuration *c)
-{
- ENTER();
-
- return __gfs_do_config(c, rndis_bind_config, gfs_hostaddr);
-}
-#endif
#ifdef CONFIG_USB_FUNCTIONFS_ETH
-static int gfs_do_ecm_config(struct usb_configuration *c)
-{
- ENTER();
-
- return __gfs_do_config(c,
- can_support_ecm(c->cdev->gadget)
- ? ecm_bind_config : geth_bind_config,
- gfs_hostaddr);
-}
-#endif
-
-#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
-static int gfs_do_generic_config(struct usb_configuration *c)
+static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
{
- ENTER();
-
- return __gfs_do_config(c, NULL, NULL);
+ return can_support_ecm(c->cdev->gadget)
+ ? ecm_bind_config(c, ethaddr)
+ : geth_bind_config(c, ethaddr);
}
#endif
/*
* Creates an output endpoint, and initializes output ports.
*/
-static int __init gmidi_bind(struct usb_gadget *gadget)
+static int __ref gmidi_bind(struct usb_gadget *gadget)
{
struct gmidi_device *dev;
struct usb_ep *in_ep, *out_ep;
/****************************** Configurations ******************************/
-static int __init do_config(struct usb_configuration *c)
+static int __ref do_config(struct usb_configuration *c)
{
struct hidg_func_node *e;
int func = 0, status = 0;
/****************************** Gadget Bind ******************************/
-static int __init hid_bind(struct usb_composite_dev *cdev)
+static int __ref hid_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
struct list_head *tmp;
struct usb_gadget *gadget = dev->gadget;
long ret = -ENOTTY;
- if (gadget->ops->ioctl) {
- lock_kernel();
+ if (gadget->ops->ioctl)
ret = gadget->ops->ioctl (gadget, code, value);
- unlock_kernel();
- }
+
return ret;
}
buf += 4;
length -= 4;
- kbuf = kmalloc (length, GFP_KERNEL);
- if (!kbuf)
- return -ENOMEM;
- if (copy_from_user (kbuf, buf, length)) {
- kfree (kbuf);
- return -EFAULT;
- }
+ kbuf = memdup_user(buf, length);
+ if (IS_ERR(kbuf))
+ return PTR_ERR(kbuf);
spin_lock_irq (&dev->lock);
value = -EINVAL;
VDBG(dev, "req->mapped = 0\n");
}
- DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
- _ep->name,
- _req, _req->length, _req->buf, _req->dma);
+ DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08llx\n",
+ _ep->name,
+ _req, _req->length, _req->buf, (unsigned long long)_req->dma);
_req->status = -EINPROGRESS;
_req->actual = 0;
return 0;
}
-static int __init msg_do_config(struct usb_configuration *c)
+static int __ref msg_do_config(struct usb_configuration *c)
{
- struct fsg_common *common;
+ static const struct fsg_operations ops = {
+ .thread_exits = msg_thread_exits,
+ };
+ static struct fsg_common common;
+
+ struct fsg_common *retp;
struct fsg_config config;
int ret;
}
fsg_config_from_params(&config, &mod_data);
- config.thread_exits = msg_thread_exits;
- common = fsg_common_init(0, c->cdev, &config);
- if (IS_ERR(common))
- return PTR_ERR(common);
+ config.ops = &ops;
+
+ retp = fsg_common_init(&common, c->cdev, &config);
+ if (IS_ERR(retp))
+ return PTR_ERR(retp);
- ret = fsg_add(c->cdev, c, common);
- fsg_common_put(common);
+ ret = fsg_bind_config(c->cdev, c, &common);
+ fsg_common_put(&common);
return ret;
}
/****************************** Gadget Bind ******************************/
-static int __init msg_bind(struct usb_composite_dev *cdev)
+static int __ref msg_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
int status;
#include <linux/kernel.h>
#include <linux/utsname.h>
+#include <linux/module.h>
#if defined USB_ETH_RNDIS
#define DRIVER_DESC "Multifunction Composite Gadget"
-#define DRIVER_VERSION "2009/07/21"
-/*-------------------------------------------------------------------------*/
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Michal Nazarewicz");
+MODULE_LICENSE("GPL");
-#define MULTI_VENDOR_NUM 0x0525 /* XXX NetChip */
-#define MULTI_PRODUCT_NUM 0xa4ab /* XXX */
-/*-------------------------------------------------------------------------*/
+/***************************** All the files... *****************************/
/*
* kbuild is not very cooperative with respect to linking separately
#include "config.c"
#include "epautoconf.c"
+#include "f_mass_storage.c"
+
#include "u_serial.c"
#include "f_acm.c"
#endif
#include "u_ether.c"
-#undef DBG /* u_ether.c has broken idea about macros */
-#undef VDBG /* so clean up after it */
-#undef ERROR
-#undef INFO
-#include "f_mass_storage.c"
-/*-------------------------------------------------------------------------*/
+
+/***************************** Device Descriptor ****************************/
+
+#define MULTI_VENDOR_NUM 0x0525 /* XXX NetChip */
+#define MULTI_PRODUCT_NUM 0xa4ab /* XXX */
+
+
+enum {
+ __MULTI_NO_CONFIG,
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+ MULTI_RNDIS_CONFIG_NUM,
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+ MULTI_CDC_CONFIG_NUM,
+#endif
+};
+
static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bcdUSB = cpu_to_le16(0x0200),
- /* .bDeviceClass = USB_CLASS_COMM, */
- /* .bDeviceSubClass = 0, */
- /* .bDeviceProtocol = 0, */
- .bDeviceClass = 0xEF,
+ .bDeviceClass = USB_CLASS_MISC /* 0xEF */,
.bDeviceSubClass = 2,
.bDeviceProtocol = 1,
- /* .bMaxPacketSize0 = f(hardware) */
/* Vendor and product id can be overridden by module parameters. */
.idVendor = cpu_to_le16(MULTI_VENDOR_NUM),
.idProduct = cpu_to_le16(MULTI_PRODUCT_NUM),
- /* .bcdDevice = f(hardware) */
- /* .iManufacturer = DYNAMIC */
- /* .iProduct = DYNAMIC */
- /* NO SERIAL NUMBER */
- .bNumConfigurations = 1,
};
-static struct usb_otg_descriptor otg_descriptor = {
- .bLength = sizeof otg_descriptor,
- .bDescriptorType = USB_DT_OTG,
-
- /* REVISIT SRP-only hardware is possible, although
- * it would not be called "OTG" ...
- */
- .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
-};
static const struct usb_descriptor_header *otg_desc[] = {
- (struct usb_descriptor_header *) &otg_descriptor,
+ (struct usb_descriptor_header *) &(struct usb_otg_descriptor){
+ .bLength = sizeof(struct usb_otg_descriptor),
+ .bDescriptorType = USB_DT_OTG,
+
+ /*
+ * REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
+ },
NULL,
};
-/* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX 0
-#define STRING_PRODUCT_IDX 1
+enum {
+ MULTI_STRING_MANUFACTURER_IDX,
+ MULTI_STRING_PRODUCT_IDX,
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+ MULTI_STRING_RNDIS_CONFIG_IDX,
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+ MULTI_STRING_CDC_CONFIG_IDX,
+#endif
+};
static char manufacturer[50];
static struct usb_string strings_dev[] = {
- [STRING_MANUFACTURER_IDX].s = manufacturer,
- [STRING_PRODUCT_IDX].s = DRIVER_DESC,
+ [MULTI_STRING_MANUFACTURER_IDX].s = manufacturer,
+ [MULTI_STRING_PRODUCT_IDX].s = DRIVER_DESC,
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+ [MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS",
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+ [MULTI_STRING_CDC_CONFIG_IDX].s = "Multifunction with CDC ECM",
+#endif
{ } /* end of list */
};
-static struct usb_gadget_strings stringtab_dev = {
- .language = 0x0409, /* en-us */
- .strings = strings_dev,
-};
-
static struct usb_gadget_strings *dev_strings[] = {
- &stringtab_dev,
+ &(struct usb_gadget_strings){
+ .language = 0x0409, /* en-us */
+ .strings = strings_dev,
+ },
NULL,
};
-static u8 hostaddr[ETH_ALEN];
/****************************** Configurations ******************************/
-static struct fsg_module_parameters mod_data = {
- .stall = 1
-};
-FSG_MODULE_PARAMETERS(/* no prefix */, mod_data);
+static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+
+static struct fsg_common fsg_common;
+
+static u8 hostaddr[ETH_ALEN];
-static struct fsg_common *fsg_common;
+/********** RNDIS **********/
#ifdef USB_ETH_RNDIS
-static int __init rndis_do_config(struct usb_configuration *c)
+static __ref int rndis_do_config(struct usb_configuration *c)
{
int ret;
if (ret < 0)
return ret;
- ret = fsg_add(c->cdev, c, fsg_common);
+ ret = fsg_bind_config(c->cdev, c, &fsg_common);
if (ret < 0)
return ret;
return 0;
}
-static struct usb_configuration rndis_config_driver = {
- .label = "Multifunction Composite (RNDIS + MS + ACM)",
- .bind = rndis_do_config,
- .bConfigurationValue = 2,
- /* .iConfiguration = DYNAMIC */
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
-};
+static int rndis_config_register(struct usb_composite_dev *cdev)
+{
+ static struct usb_configuration config = {
+ .bind = rndis_do_config,
+ .bConfigurationValue = MULTI_RNDIS_CONFIG_NUM,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ };
+
+ config.label = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].s;
+ config.iConfiguration = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].id;
+
+ return usb_add_config(cdev, &config);
+}
+
+#else
+
+static int rndis_config_register(struct usb_composite_dev *cdev)
+{
+ return 0;
+}
#endif
+
+/********** CDC ECM **********/
+
#ifdef CONFIG_USB_G_MULTI_CDC
-static int __init cdc_do_config(struct usb_configuration *c)
+static __ref int cdc_do_config(struct usb_configuration *c)
{
int ret;
if (ret < 0)
return ret;
- ret = fsg_add(c->cdev, c, fsg_common);
+ ret = fsg_bind_config(c->cdev, c, &fsg_common);
if (ret < 0)
return ret;
return 0;
}
-static struct usb_configuration cdc_config_driver = {
- .label = "Multifunction Composite (CDC + MS + ACM)",
- .bind = cdc_do_config,
- .bConfigurationValue = 1,
- /* .iConfiguration = DYNAMIC */
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
-};
+static int cdc_config_register(struct usb_composite_dev *cdev)
+{
+ static struct usb_configuration config = {
+ .bind = cdc_do_config,
+ .bConfigurationValue = MULTI_CDC_CONFIG_NUM,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ };
+
+ config.label = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].s;
+ config.iConfiguration = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].id;
+
+ return usb_add_config(cdev, &config);
+}
+
+#else
+
+static int cdc_config_register(struct usb_composite_dev *cdev)
+{
+ return 0;
+}
#endif
/****************************** Gadget Bind ******************************/
-static int __init multi_bind(struct usb_composite_dev *cdev)
+static int __ref multi_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
int status, gcnum;
goto fail0;
/* set up mass storage function */
- fsg_common = fsg_common_from_params(0, cdev, &mod_data);
- if (IS_ERR(fsg_common)) {
- status = PTR_ERR(fsg_common);
- goto fail1;
+ {
+ void *retp;
+ retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data);
+ if (IS_ERR(retp)) {
+ status = PTR_ERR(retp);
+ goto fail1;
+ }
}
-
+ /* set bcdDevice */
gcnum = usb_gadget_controller_number(gadget);
- if (gcnum >= 0)
+ if (gcnum >= 0) {
device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
- else {
- /* We assume that can_support_ecm() tells the truth;
- * but if the controller isn't recognized at all then
- * that assumption is a bit more likely to be wrong.
- */
- WARNING(cdev, "controller '%s' not recognized\n",
- gadget->name);
+ } else {
+ WARNING(cdev, "controller '%s' not recognized\n", gadget->name);
device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099);
}
-
- /* Allocate string descriptor numbers ... note that string
- * contents can be overridden by the composite_dev glue.
- */
-
- /* device descriptor strings: manufacturer, product */
+ /* allocate string descriptor numbers */
snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
gadget->name);
- status = usb_string_id(cdev);
- if (status < 0)
- goto fail2;
- strings_dev[STRING_MANUFACTURER_IDX].id = status;
- device_desc.iManufacturer = status;
- status = usb_string_id(cdev);
- if (status < 0)
+ status = usb_string_ids_tab(cdev, strings_dev);
+ if (unlikely(status < 0))
goto fail2;
- strings_dev[STRING_PRODUCT_IDX].id = status;
- device_desc.iProduct = status;
-#ifdef USB_ETH_RNDIS
- /* register our first configuration */
- status = usb_add_config(cdev, &rndis_config_driver);
- if (status < 0)
+ device_desc.iManufacturer =
+ strings_dev[MULTI_STRING_MANUFACTURER_IDX].id;
+ device_desc.iProduct =
+ strings_dev[MULTI_STRING_PRODUCT_IDX].id;
+
+ /* register configurations */
+ status = rndis_config_register(cdev);
+ if (unlikely(status < 0))
goto fail2;
-#endif
-#ifdef CONFIG_USB_G_MULTI_CDC
- /* register our second configuration */
- status = usb_add_config(cdev, &cdc_config_driver);
- if (status < 0)
+ status = cdc_config_register(cdev);
+ if (unlikely(status < 0))
goto fail2;
-#endif
- dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
- fsg_common_put(fsg_common);
+ /* we're done */
+ dev_info(&gadget->dev, DRIVER_DESC "\n");
+ fsg_common_put(&fsg_common);
return 0;
+
+ /* error recovery */
fail2:
- fsg_common_put(fsg_common);
+ fsg_common_put(&fsg_common);
fail1:
gserial_cleanup();
fail0:
.unbind = __exit_p(multi_unbind),
};
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Michal Nazarewicz");
-MODULE_LICENSE("GPL");
-static int __init g_multi_init(void)
+static int __init multi_init(void)
{
return usb_composite_register(&multi_driver);
}
-module_init(g_multi_init);
+module_init(multi_init);
-static void __exit g_multi_cleanup(void)
+static void __exit multi_exit(void)
{
usb_composite_unregister(&multi_driver);
}
-module_exit(g_multi_cleanup);
+module_exit(multi_exit);
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
#define DRIVER_DESC "Printer Gadget"
#define DRIVER_VERSION "2007 OCT 06"
+static DEFINE_MUTEX(printer_mutex);
static const char shortname [] = "printer";
static const char driver_desc [] = DRIVER_DESC;
unsigned long flags;
int ret = -EBUSY;
- lock_kernel();
+ mutex_lock(&printer_mutex);
dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
spin_lock_irqsave(&dev->lock, flags);
spin_unlock_irqrestore(&dev->lock, flags);
DBG(dev, "printer_open returned %x\n", ret);
- unlock_kernel();
+ mutex_unlock(&printer_mutex);
return ret;
}
set_gadget_data(gadget, NULL);
}
-static int __init
+static int __ref
printer_bind(struct usb_gadget *gadget)
{
struct printer_dev *dev;
* published by the Free Software Foundation.
*/
+#define DEBUG
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <plat/regs-usb-hsotg.h>
#include <mach/regs-sys.h>
#include <plat/udc-hs.h>
+#include <plat/cpu.h>
#define DMA_ADDR_INVALID (~((dma_addr_t)0))
* For periodic IN endpoints, we have fifo_size and fifo_load to try
* and keep track of the amount of data in the periodic FIFO for each
* of these as we don't have a status register that tells us how much
- * is in each of them.
+ * is in each of them. (note, this may actually be useless information
+ * as in shared-fifo mode periodic in acts like a single-frame packet
+ * buffer than a fifo)
*/
struct s3c_hsotg_ep {
struct usb_ep ep;
* @regs: The memory area mapped for accessing registers.
* @regs_res: The resource that was allocated when claiming register space.
* @irq: The IRQ number we are using
+ * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
* @debug_root: root directrory for debugfs.
* @debug_file: main status file for debugfs.
* @debug_fifo: FIFO status file for debugfs.
void __iomem *regs;
struct resource *regs_res;
int irq;
+ struct clk *clk;
+
+ unsigned int dedicated_fifos:1;
struct dentry *debug_root;
struct dentry *debug_file;
hsotg->regs + S3C_GNPTXFSIZ);
*/
- /* set FIFO sizes to 2048/0x1C0 */
+ /* set FIFO sizes to 2048/1024 */
writel(2048, hsotg->regs + S3C_GRXFSIZ);
writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
- S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
+ S3C_GNPTXFSIZ_NPTxFDep(1024),
hsotg->regs + S3C_GNPTXFSIZ);
/* arange all the rest of the TX FIFOs, as some versions of this
if (to_write == 0)
return 0;
- if (periodic) {
+ if (periodic && !hsotg->dedicated_fifos) {
u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
int size_left;
int size_done;
size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+ /* if shared fifo, we cannot write anything until the
+ * previous data has been completely sent.
+ */
+ if (hs_ep->fifo_load != 0) {
+ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+ return -ENOSPC;
+ }
+
dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n",
__func__, size_left,
hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size);
s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
return -ENOSPC;
}
+ } else if (hsotg->dedicated_fifos && hs_ep->index != 0) {
+ can_write = readl(hsotg->regs + S3C_DTXFSTS(hs_ep->index));
+
+ can_write &= 0xffff;
+ can_write *= 4;
} else {
if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) {
dev_dbg(hsotg->dev,
}
can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts);
+ can_write *= 4; /* fifo size is in 32bit quantities. */
}
dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
if (can_write > 512)
can_write = 512;
+ /* limit the write to one max-packet size worth of data, but allow
+ * the transfer to return that it did not run out of fifo space
+ * doing it. */
+ if (to_write > hs_ep->ep.maxpacket) {
+ to_write = hs_ep->ep.maxpacket;
+
+ s3c_hsotg_en_gsint(hsotg,
+ periodic ? S3C_GINTSTS_PTxFEmp :
+ S3C_GINTSTS_NPTxFEmp);
+ }
+
/* see if we can write data */
if (to_write > can_write) {
maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1;
maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1;
} else {
+ maxsize = 64+64;
if (hs_ep->dir_in) {
- /* maxsize = S3C_DIEPTSIZ0_XferSize_LIMIT + 1; */
- maxsize = 64+64+1;
maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1;
} else {
- maxsize = 0x3f;
maxpkt = 2;
}
}
read_ptr = hs_req->req.actual;
max_req = hs_req->req.length - read_ptr;
+ dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
+ __func__, to_read, max_req, read_ptr, hs_req->req.length);
+
if (to_read > max_req) {
/* more data appeared than we where willing
* to deal with in this request.
WARN_ON_ONCE(1);
}
- dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
- __func__, to_read, max_req, read_ptr, hs_req->req.length);
-
hs_ep->total_data += to_read;
hs_req->req.actual += to_read;
to_read = DIV_ROUND_UP(to_read, 4);
static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
int epnum, bool was_setup)
{
+ u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum];
struct s3c_hsotg_req *hs_req = hs_ep->req;
struct usb_request *req = &hs_req->req;
+ unsigned size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
int result = 0;
if (!hs_req) {
}
if (using_dma(hsotg)) {
- u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
unsigned size_done;
- unsigned size_left;
/* Calculate the size of the transfer by checking how much
* is left in the endpoint size register and then working it
* so may overshoot/undershoot the transfer.
*/
- size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
-
size_done = hs_ep->size_loaded - size_left;
size_done += hs_ep->last_load;
req->actual = size_done;
}
+ /* if there is more request to do, schedule new transfer */
+ if (req->actual < req->length && size_left == 0) {
+ s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
+ return;
+ }
+
if (req->actual < req->length && req->short_not_ok) {
dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
__func__, req->actual, req->length);
if (dir_in) {
s3c_hsotg_complete_in(hsotg, hs_ep);
- if (idx == 0)
+ if (idx == 0 && !hs_ep->req)
s3c_hsotg_enqueue_setup(hsotg);
} else if (using_dma(hsotg)) {
/* We're using DMA, we need to fire an OutDone here
__func__, idx);
clear |= S3C_DIEPMSK_INTknEPMisMsk;
}
+
+ /* FIFO has space or is empty (see GAHBCFG) */
+ if (hsotg->dedicated_fifos &&
+ ints & S3C_DIEPMSK_TxFIFOEmpty) {
+ dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
+ __func__, idx);
+ s3c_hsotg_trytx(hsotg, hs_ep);
+ clear |= S3C_DIEPMSK_TxFIFOEmpty;
+ }
}
writel(clear, hsotg->regs + epint_reg);
kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true);
/* it seems after a reset we can end up with a situation
- * where the TXFIFO still has data in it... try flushing
- * it to remove anything that may still be in it.
+ * where the TXFIFO still has data in it... the docs
+ * suggest resetting all the fifos, so use the init_fifo
+ * code to relayout and flush the fifos.
*/
- if (1) {
- writel(S3C_GRSTCTL_TxFNum(0) | S3C_GRSTCTL_TxFFlsh,
- hsotg->regs + S3C_GRSTCTL);
-
- dev_info(hsotg->dev, "GNPTXSTS=%08x\n",
- readl(hsotg->regs + S3C_GNPTXSTS));
- }
+ s3c_hsotg_init_fifo(hsotg);
s3c_hsotg_enqueue_setup(hsotg);
break;
}
+ /* if the hardware has dedicated fifos, we must give each IN EP
+ * a unique tx-fifo even if it is non-periodic.
+ */
+ if (dir_in && hsotg->dedicated_fifos)
+ epctrl |= S3C_DxEPCTL_TxFNum(index);
+
/* for non control endpoints, set PID to D0 */
if (index)
epctrl |= S3C_DxEPCTL_SetD0PID;
writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
S3C_DIEPMSK_INTknEPMisMsk |
- S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
+ S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk |
+ ((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0),
hsotg->regs + S3C_DIEPMSK);
/* don't need XferCompl, we get that from RXFIFO in slave mode. In
*/
ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum));
- hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo);
+ hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4;
/* if we're using dma, we need to set the next-endpoint pointer
* to be something valid.
*/
static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
{
- u32 osc;
+ struct clk *xusbxti;
+ u32 pwr, osc;
- writel(0, S3C_PHYPWR);
+ pwr = readl(S3C_PHYPWR);
+ pwr &= ~0x19;
+ writel(pwr, S3C_PHYPWR);
mdelay(1);
osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
+ xusbxti = clk_get(hsotg->dev, "xusbxti");
+ if (xusbxti && !IS_ERR(xusbxti)) {
+ switch (clk_get_rate(xusbxti)) {
+ case 12*MHZ:
+ osc |= S3C_PHYCLK_CLKSEL_12M;
+ break;
+ case 24*MHZ:
+ osc |= S3C_PHYCLK_CLKSEL_24M;
+ break;
+ default:
+ case 48*MHZ:
+ /* default reference clock */
+ break;
+ }
+ clk_put(xusbxti);
+ }
+
writel(osc | 0x10, S3C_PHYCLK);
/* issue a full set of resets to the otg and core */
static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
{
+ u32 cfg4;
+
/* unmask subset of endpoint interrupts */
writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0,
hsotg->regs + S3C_GAHBCFG);
+
+ /* check hardware configuration */
+
+ cfg4 = readl(hsotg->regs + 0x50);
+ hsotg->dedicated_fifos = (cfg4 >> 25) & 1;
+
+ dev_info(hsotg->dev, "%s fifos\n",
+ hsotg->dedicated_fifos ? "dedicated" : "shared");
}
static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
hsotg->dev = dev;
hsotg->plat = plat;
+ hsotg->clk = clk_get(&pdev->dev, "otg");
+ if (IS_ERR(hsotg->clk)) {
+ dev_err(dev, "cannot get otg clock\n");
+ ret = -EINVAL;
+ goto err_mem;
+ }
+
platform_set_drvdata(pdev, hsotg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "cannot find register resource 0\n");
ret = -EINVAL;
- goto err_mem;
+ goto err_clk;
}
hsotg->regs_res = request_mem_region(res->start, resource_size(res),
if (!hsotg->regs_res) {
dev_err(dev, "cannot reserve registers\n");
ret = -ENOENT;
- goto err_mem;
+ goto err_clk;
}
hsotg->regs = ioremap(res->start, resource_size(res));
/* reset the system */
+ clk_enable(hsotg->clk);
+
s3c_hsotg_gate(pdev, true);
s3c_hsotg_otgreset(hsotg);
err_regs_res:
release_resource(hsotg->regs_res);
kfree(hsotg->regs_res);
-
+err_clk:
+ clk_put(hsotg->clk);
err_mem:
kfree(hsotg);
return ret;
s3c_hsotg_gate(pdev, false);
+ clk_disable(hsotg->clk);
+ clk_put(hsotg->clk);
+
kfree(hsotg);
return 0;
}
/*-------------------------------------------------------------------------*/
-static int __init serial_bind_config(struct usb_configuration *c)
+static int __ref serial_bind_config(struct usb_configuration *c)
{
unsigned i;
int status = 0;
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
};
-static int __init gs_bind(struct usb_composite_dev *cdev)
+static int __ref gs_bind(struct usb_composite_dev *cdev)
{
int gcnum;
struct usb_gadget *gadget = cdev->gadget;
#include <asm/unaligned.h>
-/* Thanks to NetChip Technologies for donating this product ID.
+/*
+ * Thanks to NetChip Technologies for donating this product ID.
*
* DO NOT REUSE THESE IDs with any other driver!! Ever!!
- * Instead: allocate your own, using normal USB-IF procedures. */
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
#define FSG_VENDOR_ID 0x0525 /* NetChip */
#define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */
#define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args)
#define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args)
-/* Keep those macros in sync with thos in
- * include/linux/ubs/composite.h or else GCC will complain. If they
+/*
+ * Keep those macros in sync with those in
+ * include/linux/usb/composite.h or else GCC will complain. If they
* are identical (the same names of arguments, white spaces in the
* same places) GCC will allow redefinition otherwise (even if some
- * white space is removed or added) warning will be issued. No
- * checking if those symbols is defined is performed because warning
- * is desired when those macros were defined by someone else to mean
- * something else. */
+ * white space is removed or added) warning will be issued.
+ *
+ * Those macros are needed here because File Storage Gadget does not
+ * include the composite.h header. For composite gadgets those macros
+ * are redundant since composite.h is included any way.
+ *
+ * One could check whether those macros are already defined (which
+ * would indicate composite.h had been included) or not (which would
+ * indicate we were in FSG) but this is not done because a warning is
+ * desired if definitions here differ from the ones in composite.h.
+ *
+ * We want the definitions to match and be the same in File Storage
+ * Gadget as well as Mass Storage Function (and so composite gadgets
+ * using MSF). If someone changes them in composite.h it will produce
+ * a warning in this file when building MSF.
+ */
#define DBG(d, fmt, args...) dev_dbg(&(d)->gadget->dev , fmt , ## args)
#define VDBG(d, fmt, args...) dev_vdbg(&(d)->gadget->dev , fmt , ## args)
#define ERROR(d, fmt, args...) dev_err(&(d)->gadget->dev , fmt , ## args)
unsigned int prevent_medium_removal:1;
unsigned int registered:1;
unsigned int info_valid:1;
+ unsigned int nofua:1;
u32 sense_data;
u32 sense_data_info;
enum fsg_buffer_state state;
struct fsg_buffhd *next;
- /* The NetChip 2280 is faster, and handles some protocol faults
+ /*
+ * The NetChip 2280 is faster, and handles some protocol faults
* better, if we don't submit any short bulk-out read requests.
- * So we will record the intended request length here. */
+ * So we will record the intended request length here.
+ */
unsigned int bulk_out_intended_length;
struct usb_request *inreq;
.iInterface = FSG_STRING_INTERFACE,
};
-/* Three full-speed endpoint descriptors: bulk-in, bulk-out,
- * and interrupt-in. */
+/*
+ * Three full-speed endpoint descriptors: bulk-in, bulk-out, and
+ * interrupt-in.
+ */
static struct usb_endpoint_descriptor
fsg_fs_bulk_in_desc = {
*
* That means alternate endpoint descriptors (bigger packets)
* and a "device qualifier" ... plus more construction options
- * for the config descriptor.
+ * for the configuration descriptor.
*/
static struct usb_endpoint_descriptor
fsg_hs_bulk_in_desc = {
/*-------------------------------------------------------------------------*/
-/* If the next two routines are called while the gadget is registered,
- * the caller must own fsg->filesem for writing. */
+/*
+ * If the next two routines are called while the gadget is registered,
+ * the caller must own fsg->filesem for writing.
+ */
static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
{
goto out;
}
- /* If we can't read the file, it's no good.
- * If we can't write the file, use it read-only. */
+ /*
+ * If we can't read the file, it's no good.
+ * If we can't write the file, use it read-only.
+ */
if (!filp->f_op || !(filp->f_op->read || filp->f_op->aio_read)) {
LINFO(curlun, "file not readable: %s\n", filename);
goto out;
/*-------------------------------------------------------------------------*/
-/* Sync the file data, don't bother with the metadata.
- * This code was copied from fs/buffer.c:sys_fdatasync(). */
+/*
+ * Sync the file data, don't bother with the metadata.
+ * This code was copied from fs/buffer.c:sys_fdatasync().
+ */
static int fsg_lun_fsync_sub(struct fsg_lun *curlun)
{
struct file *filp = curlun->filp;
: curlun->initially_ro);
}
+static ssize_t fsg_show_nofua(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct fsg_lun *curlun = fsg_lun_from_dev(dev);
+
+ return sprintf(buf, "%u\n", curlun->nofua);
+}
+
static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr,
char *buf)
{
ssize_t rc = count;
struct fsg_lun *curlun = fsg_lun_from_dev(dev);
struct rw_semaphore *filesem = dev_get_drvdata(dev);
- int i;
+ unsigned long ro;
- if (sscanf(buf, "%d", &i) != 1)
+ if (strict_strtoul(buf, 2, &ro))
return -EINVAL;
- /* Allow the write-enable status to change only while the backing file
- * is closed. */
+ /*
+ * Allow the write-enable status to change only while the
+ * backing file is closed.
+ */
down_read(filesem);
if (fsg_lun_is_open(curlun)) {
LDBG(curlun, "read-only status change prevented\n");
rc = -EBUSY;
} else {
- curlun->ro = !!i;
- curlun->initially_ro = !!i;
+ curlun->ro = ro;
+ curlun->initially_ro = ro;
LDBG(curlun, "read-only status set to %d\n", curlun->ro);
}
up_read(filesem);
return rc;
}
+static ssize_t fsg_store_nofua(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fsg_lun *curlun = fsg_lun_from_dev(dev);
+ unsigned long nofua;
+
+ if (strict_strtoul(buf, 2, &nofua))
+ return -EINVAL;
+
+ /* Sync data when switching from async mode to sync */
+ if (!nofua && curlun->nofua)
+ fsg_lun_fsync_sub(curlun);
+
+ curlun->nofua = nofua;
+
+ return count;
+}
+
static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
module_param(host_addr, charp, S_IRUGO);
MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
-
-static u8 __init nibble(unsigned char c)
-{
- if (isdigit(c))
- return c - '0';
- c = toupper(c);
- if (isxdigit(c))
- return 10 + c - 'A';
- return 0;
-}
-
static int get_ether_addr(const char *str, u8 *dev_addr)
{
if (str) {
if ((*str == '.') || (*str == ':'))
str++;
- num = nibble(*str++) << 4;
- num |= (nibble(*str++));
+ num = hex_to_bin(*str++) << 4;
+ num |= hex_to_bin(*str++);
dev_addr [i] = num;
}
if (is_valid_ether_addr(dev_addr))
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/delay.h>
* USB configuration
*/
-static int __init
+static int __ref
webcam_config_bind(struct usb_configuration *c)
{
return uvc_bind_config(c, uvc_control_cls, uvc_fs_streaming_cls,
return 0;
}
-static int __init
+static int __ref
webcam_bind(struct usb_composite_dev *cdev)
{
int ret;
/*-------------------------------------------------------------------------*/
-static int __init zero_bind(struct usb_composite_dev *cdev)
+static int __ref zero_bind(struct usb_composite_dev *cdev)
{
int gcnum;
struct usb_gadget *gadget = cdev->gadget;
from ARC, and has since changed hands a few times.
config USB_EHCI_TT_NEWSCHED
- bool "Improved Transaction Translator scheduling (EXPERIMENTAL)"
- depends on USB_EHCI_HCD && EXPERIMENTAL
+ bool "Improved Transaction Translator scheduling"
+ depends on USB_EHCI_HCD
+ default y
---help---
This changes the periodic scheduling code to fill more of the low
and full speed bandwidth available from the Transaction Translator
If you have multiple periodic low/fullspeed devices connected to a
highspeed USB hub which is connected to a highspeed USB Host
Controller, and some of those devices will not work correctly
- (possibly due to "ENOSPC" or "-28" errors), say Y.
+ (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
+ you have only one such device and it doesn't work, you could try
+ saying N.
- If unsure, say N.
+ If unsure, say Y.
config USB_EHCI_BIG_ENDIAN_MMIO
bool
* the root hub is either suspended or stopped.
*/
spin_lock_irqsave(&ehci->lock, flags);
- ehci_prepare_ports_for_controller_suspend(ehci);
+ ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
HCC_64BIT_ADDR(params) ? " 64 bit addr" : "");
} else {
ehci_dbg (ehci,
- "%s hcc_params %04x thresh %d uframes %s%s%s\n",
+ "%s hcc_params %04x thresh %d uframes %s%s%s%s%s%s%s\n",
label,
params,
HCC_ISOC_THRES(params),
HCC_PGM_FRAMELISTLEN(params) ? "256/512/1024" : "1024",
HCC_CANPARK(params) ? " park" : "",
- HCC_64BIT_ADDR(params) ? " 64 bit addr" : "");
+ HCC_64BIT_ADDR(params) ? " 64 bit addr" : "",
+ HCC_LPM(params) ? " LPM" : "",
+ HCC_PER_PORT_CHANGE_EVENT(params) ? " ppce" : "",
+ HCC_HW_PREFETCH(params) ? " hw prefetch" : "",
+ HCC_32FRAME_PERIODIC_LIST(params) ?
+ " 32 peridic list" : "");
}
}
#else
dbg_status_buf (char *buf, unsigned len, const char *label, u32 status)
{
return scnprintf (buf, len,
- "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s",
+ "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s%s",
label, label [0] ? " " : "", status,
+ (status & STS_PPCE_MASK) ? " PPCE" : "",
(status & STS_ASS) ? " Async" : "",
(status & STS_PSS) ? " Periodic" : "",
(status & STS_RECL) ? " Recl" : "",
dbg_intr_buf (char *buf, unsigned len, const char *label, u32 enable)
{
return scnprintf (buf, len,
- "%s%sintrenable %02x%s%s%s%s%s%s",
+ "%s%sintrenable %02x%s%s%s%s%s%s%s",
label, label [0] ? " " : "", enable,
+ (enable & STS_PPCE_MASK) ? " PPCE" : "",
(enable & STS_IAA) ? " IAA" : "",
(enable & STS_FATAL) ? " FATAL" : "",
(enable & STS_FLR) ? " FLR" : "",
dbg_command_buf (char *buf, unsigned len, const char *label, u32 command)
{
return scnprintf (buf, len,
- "%s%scommand %06x %s=%d ithresh=%d%s%s%s%s period=%s%s %s",
+ "%s%scommand %07x %s%s%s%s%s%s=%d ithresh=%d%s%s%s%s "
+ "period=%s%s %s",
label, label [0] ? " " : "", command,
- (command & CMD_PARK) ? "park" : "(park)",
+ (command & CMD_HIRD) ? " HIRD" : "",
+ (command & CMD_PPCEE) ? " PPCEE" : "",
+ (command & CMD_FSP) ? " FSP" : "",
+ (command & CMD_ASPE) ? " ASPE" : "",
+ (command & CMD_PSPE) ? " PSPE" : "",
+ (command & CMD_PARK) ? " park" : "(park)",
CMD_PARK_CNT (command),
(command >> 16) & 0x3f,
(command & CMD_LRESET) ? " LReset" : "",
}
return scnprintf (buf, len,
- "%s%sport %d status %06x%s%s sig=%s%s%s%s%s%s%s%s%s%s",
+ "%s%sport:%d status %06x %d %s%s%s%s%s%s "
+ "sig=%s%s%s%s%s%s%s%s%s%s%s",
label, label [0] ? " " : "", port, status,
+ status>>25,/*device address */
+ (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ACK ?
+ " ACK" : "",
+ (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_NYET ?
+ " NYET" : "",
+ (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_STALL ?
+ " STALL" : "",
+ (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ERR ?
+ " ERR" : "",
(status & PORT_POWER) ? " POWER" : "",
(status & PORT_OWNER) ? " OWNER" : "",
sig,
+ (status & PORT_LPM) ? " LPM" : "",
(status & PORT_RESET) ? " RESET" : "",
(status & PORT_SUSPEND) ? " SUSPEND" : "",
(status & PORT_RESUME) ? " RESUME" : "",
static int debug_periodic_open(struct inode *, struct file *);
static int debug_registers_open(struct inode *, struct file *);
static int debug_async_open(struct inode *, struct file *);
+static int debug_lpm_open(struct inode *, struct file *);
+static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos);
+static ssize_t debug_lpm_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *ppos);
+static int debug_lpm_close(struct inode *inode, struct file *file);
+
static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
static int debug_close(struct inode *, struct file *);
.read = debug_output,
.release = debug_close,
};
+static const struct file_operations debug_lpm_fops = {
+ .owner = THIS_MODULE,
+ .open = debug_lpm_open,
+ .read = debug_lpm_read,
+ .write = debug_lpm_write,
+ .release = debug_lpm_close,
+};
static struct dentry *ehci_debug_root;
spin_lock_irqsave (&ehci->lock, flags);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
size = scnprintf (next, size,
"bus %s, device %s\n"
"%s\n"
return file->private_data ? 0 : -ENOMEM;
}
+static int debug_lpm_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static int debug_lpm_close(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
+static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ /* TODO: show lpm stats */
+ return 0;
+}
+
+static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ char buf[50];
+ size_t len;
+ u32 temp;
+ unsigned long port;
+ u32 __iomem *portsc ;
+ u32 params;
+
+ hcd = bus_to_hcd(file->private_data);
+ ehci = hcd_to_ehci(hcd);
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len))
+ return -EFAULT;
+ buf[len] = '\0';
+ if (len > 0 && buf[len - 1] == '\n')
+ buf[len - 1] = '\0';
+
+ if (strncmp(buf, "enable", 5) == 0) {
+ if (strict_strtoul(buf + 7, 10, &port))
+ return -EINVAL;
+ params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ if (port > HCS_N_PORTS(params)) {
+ ehci_dbg(ehci, "ERR: LPM on bad port %lu\n", port);
+ return -ENODEV;
+ }
+ portsc = &ehci->regs->port_status[port-1];
+ temp = ehci_readl(ehci, portsc);
+ if (!(temp & PORT_DEV_ADDR)) {
+ ehci_dbg(ehci, "LPM: no device attached\n");
+ return -ENODEV;
+ }
+ temp |= PORT_LPM;
+ ehci_writel(ehci, temp, portsc);
+ printk(KERN_INFO "force enable LPM for port %lu\n", port);
+ } else if (strncmp(buf, "hird=", 5) == 0) {
+ unsigned long hird;
+ if (strict_strtoul(buf + 5, 16, &hird))
+ return -EINVAL;
+ printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird);
+ temp = ehci_readl(ehci, &ehci->regs->command);
+ temp &= ~CMD_HIRD;
+ temp |= hird << 24;
+ ehci_writel(ehci, temp, &ehci->regs->command);
+ } else if (strncmp(buf, "disable", 7) == 0) {
+ if (strict_strtoul(buf + 8, 10, &port))
+ return -EINVAL;
+ params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ if (port > HCS_N_PORTS(params)) {
+ ehci_dbg(ehci, "ERR: LPM off bad port %lu\n", port);
+ return -ENODEV;
+ }
+ portsc = &ehci->regs->port_status[port-1];
+ temp = ehci_readl(ehci, portsc);
+ if (!(temp & PORT_DEV_ADDR)) {
+ ehci_dbg(ehci, "ERR: no device attached\n");
+ return -ENODEV;
+ }
+ temp &= ~PORT_LPM;
+ ehci_writel(ehci, temp, portsc);
+ printk(KERN_INFO "disabled LPM for port %lu\n", port);
+ } else
+ return -EOPNOTSUPP;
+ return count;
+}
+
static inline void create_debug_files (struct ehci_hcd *ehci)
{
struct usb_bus *bus = &ehci_to_hcd(ehci)->self;
ehci->debug_dir = debugfs_create_dir(bus->bus_name, ehci_debug_root);
if (!ehci->debug_dir)
- goto dir_error;
-
- ehci->debug_async = debugfs_create_file("async", S_IRUGO,
- ehci->debug_dir, bus,
- &debug_async_fops);
- if (!ehci->debug_async)
- goto async_error;
-
- ehci->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
- ehci->debug_dir, bus,
- &debug_periodic_fops);
- if (!ehci->debug_periodic)
- goto periodic_error;
-
- ehci->debug_registers = debugfs_create_file("registers", S_IRUGO,
- ehci->debug_dir, bus,
- &debug_registers_fops);
- if (!ehci->debug_registers)
- goto registers_error;
+ return;
+
+ if (!debugfs_create_file("async", S_IRUGO, ehci->debug_dir, bus,
+ &debug_async_fops))
+ goto file_error;
+
+ if (!debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus,
+ &debug_periodic_fops))
+ goto file_error;
+
+ if (!debugfs_create_file("registers", S_IRUGO, ehci->debug_dir, bus,
+ &debug_registers_fops))
+ goto file_error;
+
+ if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus,
+ &debug_lpm_fops))
+ goto file_error;
+
return;
-registers_error:
- debugfs_remove(ehci->debug_periodic);
-periodic_error:
- debugfs_remove(ehci->debug_async);
-async_error:
- debugfs_remove(ehci->debug_dir);
-dir_error:
- ehci->debug_periodic = NULL;
- ehci->debug_async = NULL;
- ehci->debug_dir = NULL;
+file_error:
+ debugfs_remove_recursive(ehci->debug_dir);
}
static inline void remove_debug_files (struct ehci_hcd *ehci)
{
- debugfs_remove(ehci->debug_registers);
- debugfs_remove(ehci->debug_periodic);
- debugfs_remove(ehci->debug_async);
- debugfs_remove(ehci->debug_dir);
+ debugfs_remove_recursive(ehci->debug_dir);
}
#endif /* STUB_DEBUG_FILES */
struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
void __iomem *non_ehci = hcd->regs;
- ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd));
+ ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
+ device_may_wakeup(dev));
if (!fsl_deep_sleep())
return 0;
#include <linux/dma-mapping.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
+#include <linux/uaccess.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#define EHCI_TUNE_RL_TT 0
#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
#define EHCI_TUNE_MULT_TT 1
-#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
+/*
+ * Some drivers think it's safe to schedule isochronous transfers more than
+ * 256 ms into the future (partly as a result of an old bug in the scheduling
+ * code). In an attempt to avoid trouble, we will use a minimum scheduling
+ * length of 512 frames instead of 256.
+ */
+#define EHCI_TUNE_FLS 1 /* (medium) 512-frame schedule */
#define EHCI_IAA_MSECS 10 /* arbitrary */
#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */
module_param (ignore_oc, bool, S_IRUGO);
MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
+/* for link power management(LPM) feature */
+static unsigned int hird;
+module_param(hird, int, S_IRUGO);
+MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n");
+
#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
/*-------------------------------------------------------------------------*/
static void ehci_work(struct ehci_hcd *ehci);
#include "ehci-hub.c"
+#include "ehci-lpm.c"
#include "ehci-mem.c"
#include "ehci-q.c"
#include "ehci-sched.c"
if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
log2_irq_thresh = 0;
temp = 1 << (16 + log2_irq_thresh);
+ if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) {
+ ehci->has_ppcd = 1;
+ ehci_dbg(ehci, "enable per-port change event\n");
+ temp |= CMD_PPCEE;
+ }
if (HCC_CANPARK(hcc_params)) {
/* HW default park == 3, on hardware that supports it (like
* NVidia and ALI silicon), maximizes throughput on the async
default: BUG();
}
}
+ if (HCC_LPM(hcc_params)) {
+ /* support link power management EHCI 1.1 addendum */
+ ehci_dbg(ehci, "support lpm\n");
+ ehci->has_lpm = 1;
+ if (hird > 0xf) {
+ ehci_dbg(ehci, "hird %d invalid, use default 0",
+ hird);
+ hird = 0;
+ }
+ temp |= hird << 24;
+ }
ehci->command = temp;
/* Accept arbitrarily long scatter-gather lists */
- hcd->self.sg_tablesize = ~0;
+ if (!(hcd->driver->flags & HCD_LOCAL_MEM))
+ hcd->self.sg_tablesize = ~0;
return 0;
}
u32 hcc_params;
hcd->uses_new_polling = 1;
- hcd->poll_rh = 0;
/* EHCI spec section 4.1 */
if ((retval = ehci_reset(ehci)) != 0) {
/* remote wakeup [4.3.1] */
if (status & STS_PCD) {
unsigned i = HCS_N_PORTS (ehci->hcs_params);
+ u32 ppcd = 0;
/* kick root hub later */
pcd_status = status;
if (!(cmd & CMD_RUN))
usb_hcd_resume_root_hub(hcd);
+ /* get per-port change detect bits */
+ if (ehci->has_ppcd)
+ ppcd = status >> 16;
+
while (i--) {
- int pstatus = ehci_readl(ehci,
- &ehci->regs->port_status [i]);
+ int pstatus;
+
+ /* leverage per-port change bits feature */
+ if (ehci->has_ppcd && !(ppcd & (1 << i)))
+ continue;
+ pstatus = ehci_readl(ehci,
+ &ehci->regs->port_status[i]);
if (pstatus & PORT_OWNER)
continue;
}
static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
- bool suspending)
+ bool suspending, bool do_wakeup)
{
int port;
u32 temp;
* when the controller is suspended or resumed. In all other
* cases they don't need to be changed.
*/
- if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup ||
- device_may_wakeup(ehci_to_hcd(ehci)->self.controller))
+ if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
return;
/* clear phy low-power mode before changing wakeup flags */
ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
}
}
+
+ /* Does the root hub have a port wakeup pending? */
+ if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
+ usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
}
static int ehci_bus_suspend (struct usb_hcd *hcd)
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
spin_lock_irq (&ehci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
spin_unlock_irq(&ehci->lock);
return -ESHUTDOWN;
}
u32 mask;
int ports, i, retval = 1;
unsigned long flags;
+ u32 ppcd = 0;
/* if !USB_SUSPEND, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
/* port N changes (bit N)? */
spin_lock_irqsave (&ehci->lock, flags);
+
+ /* get per-port change detect bits */
+ if (ehci->has_ppcd)
+ ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
+
for (i = 0; i < ports; i++) {
+ /* leverage per-port change bits feature */
+ if (ehci->has_ppcd && !(ppcd & (1 << i)))
+ continue;
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
/*
status_reg);
break;
case USB_PORT_FEAT_C_CONNECTION:
+ if (ehci->has_lpm) {
+ /* clear PORTSC bits on disconnect */
+ temp &= ~PORT_LPM;
+ temp &= ~PORT_DEV_ADDR;
+ }
ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
status_reg);
break;
--- /dev/null
+/* ehci-lpm.c EHCI HCD LPM support code
+ * Copyright (c) 2008 - 2010, Intel Corporation.
+ * Author: Jacob Pan <jacob.jun.pan@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* this file is part of ehci-hcd.c */
+static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num)
+{
+ u32 __iomem portsc;
+
+ ehci_dbg(ehci, "set dev address %d for port %d\n", dev_addr, port_num);
+ if (port_num > HCS_N_PORTS(ehci->hcs_params)) {
+ ehci_dbg(ehci, "invalid port number %d\n", port_num);
+ return -ENODEV;
+ }
+ portsc = ehci_readl(ehci, &ehci->regs->port_status[port_num-1]);
+ portsc &= ~PORT_DEV_ADDR;
+ portsc |= dev_addr<<25;
+ ehci_writel(ehci, portsc, &ehci->regs->port_status[port_num-1]);
+ return 0;
+}
+
+/*
+ * this function is used to check if the device support LPM
+ * if yes, mark the PORTSC register with PORT_LPM bit
+ */
+static int ehci_lpm_check(struct ehci_hcd *ehci, int port)
+{
+ u32 __iomem *portsc ;
+ u32 val32;
+ int retval;
+
+ portsc = &ehci->regs->port_status[port-1];
+ val32 = ehci_readl(ehci, portsc);
+ if (!(val32 & PORT_DEV_ADDR)) {
+ ehci_dbg(ehci, "LPM: no device attached\n");
+ return -ENODEV;
+ }
+ val32 |= PORT_LPM;
+ ehci_writel(ehci, val32, portsc);
+ msleep(5);
+ val32 |= PORT_SUSPEND;
+ ehci_dbg(ehci, "Sending LPM 0x%08x to port %d\n", val32, port);
+ ehci_writel(ehci, val32, portsc);
+ /* wait for ACK */
+ msleep(10);
+ retval = handshake(ehci, &ehci->regs->port_status[port-1], PORT_SSTS,
+ PORTSC_SUSPEND_STS_ACK, 125);
+ dbg_port(ehci, "LPM", port, val32);
+ if (retval != -ETIMEDOUT) {
+ ehci_dbg(ehci, "LPM: device ACK for LPM\n");
+ val32 |= PORT_LPM;
+ /*
+ * now device should be in L1 sleep, let's wake up the device
+ * so that we can complete enumeration.
+ */
+ ehci_writel(ehci, val32, portsc);
+ msleep(10);
+ val32 |= PORT_RESUME;
+ ehci_writel(ehci, val32, portsc);
+ } else {
+ ehci_dbg(ehci, "LPM: device does not ACK, disable LPM %d\n",
+ retval);
+ val32 &= ~PORT_LPM;
+ retval = -ETIMEDOUT;
+ ehci_writel(ehci, val32, portsc);
+ }
+
+ return retval;
+}
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
+#include <linux/usb/ulpi.h>
#include <plat/usb.h>
/*
/*-------------------------------------------------------------------------*/
+static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+ unsigned reg = 0;
+
+ reg = ULPI_FUNC_CTRL_RESET
+ /* FUNCTION_CTRL_SET register */
+ | (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT)
+ /* Write */
+ | (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT)
+ /* PORTn */
+ | ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT)
+ /* start ULPI access*/
+ | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT);
+
+ ehci_omap_writel(omap->ehci_base, EHCI_INSNREG05_ULPI, reg);
+
+ /* Wait for ULPI access completion */
+ while ((ehci_omap_readl(omap->ehci_base, EHCI_INSNREG05_ULPI)
+ & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) {
+ cpu_relax();
+
+ if (time_after(jiffies, timeout)) {
+ dev_dbg(omap->dev, "phy reset operation timed out\n");
+ break;
+ }
+ }
+}
+
/* omap_start_ehc
* - Start the TI USBHOST controller
*/
gpio_set_value(omap->reset_gpio_port[1], 1);
}
+ /* Soft reset the PHY using PHY reset command over ULPI */
+ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
+ omap_ehci_soft_phy_reset(omap, 0);
+ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
+ omap_ehci_soft_phy_reset(omap, 1);
+
return 0;
err_sys_status:
break;
case PCI_VENDOR_ID_INTEL:
ehci->need_io_watchdog = 0;
+ ehci->fs_i_thresh = 1;
if (pdev->device == 0x27cc) {
ehci->broken_periodic = 1;
ehci_info(ehci, "using broken periodic workaround\n");
* Also they depend on separate root hub suspend/resume.
*/
-static int ehci_pci_suspend(struct usb_hcd *hcd)
+static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
unsigned long flags;
* the root hub is either suspended or stopped.
*/
spin_lock_irqsave (&ehci->lock, flags);
- ehci_prepare_ports_for_controller_suspend(ehci);
+ ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
}
#endif
+static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int rc = 0;
+
+ if (!udev->parent) /* udev is root hub itself, impossible */
+ rc = -1;
+ /* we only support lpm device connected to root hub yet */
+ if (ehci->has_lpm && !udev->parent->parent) {
+ rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
+ if (!rc)
+ rc = ehci_lpm_check(ehci, udev->portnum);
+ }
+ return rc;
+}
+
static const struct hc_driver ehci_pci_hc_driver = {
.description = hcd_name,
.product_desc = "EHCI Host Controller",
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+ /*
+ * call back when device connected and addressed
+ */
+ .update_device = ehci_update_device,
+
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int __devinit
-ehci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
+ehci_hcd_ppc_of_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
}
-static int ehci_hcd_ppc_of_remove(struct of_device *op)
+static int ehci_hcd_ppc_of_remove(struct platform_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
}
-static int ehci_hcd_ppc_of_shutdown(struct of_device *op)
+static int ehci_hcd_ppc_of_shutdown(struct platform_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
#endif
spin_lock_irqsave (&ehci->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
rc = -ESHUTDOWN;
goto done;
}
spin_lock_irqsave (&ehci->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
status = -ESHUTDOWN;
goto done_not_linked;
}
if (stream->ep)
stream->ep->hcpriv = NULL;
- if (stream->rescheduled) {
- ehci_info (ehci, "ep%d%s-iso rescheduled "
- "%lu times in %lu seconds\n",
- stream->bEndpointAddress, is_in ? "in" : "out",
- stream->rescheduled,
- ((jiffies - stream->start)/HZ)
- );
- }
-
kfree(stream);
}
}
struct ehci_iso_stream *stream
)
{
- u32 now, next, start, period;
+ u32 now, next, start, period, span;
int status;
unsigned mod = ehci->periodic_size << 3;
struct ehci_iso_sched *sched = urb->hcpriv;
- struct pci_dev *pdev;
- if (sched->span > (mod - SCHEDULE_SLOP)) {
- ehci_dbg (ehci, "iso request %p too long\n", urb);
- status = -EFBIG;
- goto fail;
+ period = urb->interval;
+ span = sched->span;
+ if (!stream->highspeed) {
+ period <<= 3;
+ span <<= 3;
}
- if ((stream->depth + sched->span) > mod) {
- ehci_dbg (ehci, "request %p would overflow (%d+%d>%d)\n",
- urb, stream->depth, sched->span, mod);
+ if (span > mod - SCHEDULE_SLOP) {
+ ehci_dbg (ehci, "iso request %p too long\n", urb);
status = -EFBIG;
goto fail;
}
- period = urb->interval;
- if (!stream->highspeed)
- period <<= 3;
-
- now = ehci_readl(ehci, &ehci->regs->frame_index) % mod;
+ now = ehci_readl(ehci, &ehci->regs->frame_index) & (mod - 1);
/* Typical case: reuse current schedule, stream is still active.
* Hopefully there are no gaps from the host falling behind
* slot in the schedule, implicitly assuming URB_ISO_ASAP.
*/
if (likely (!list_empty (&stream->td_list))) {
- pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
- start = stream->next_uframe;
+ u32 excess;
/* For high speed devices, allow scheduling within the
- * isochronous scheduling threshold. For full speed devices,
- * don't. (Work around for Intel ICH9 bug.)
+ * isochronous scheduling threshold. For full speed devices
+ * and Intel PCI-based controllers, don't (work around for
+ * Intel ICH9 bug).
*/
- if (!stream->highspeed &&
- pdev->vendor == PCI_VENDOR_ID_INTEL)
+ if (!stream->highspeed && ehci->fs_i_thresh)
next = now + ehci->i_thresh;
else
next = now;
- /* Fell behind (by up to twice the slop amount)? */
- if (((start - next) & (mod - 1)) >=
- mod - 2 * SCHEDULE_SLOP)
- start += period * DIV_ROUND_UP(
- (next - start) & (mod - 1),
- period);
-
- /* Tried to schedule too far into the future? */
- if (unlikely(((start - now) & (mod - 1)) + sched->span
- >= mod - 2 * SCHEDULE_SLOP)) {
+ /* Fell behind (by up to twice the slop amount)?
+ * We decide based on the time of the last currently-scheduled
+ * slot, not the time of the next available slot.
+ */
+ excess = (stream->next_uframe - period - next) & (mod - 1);
+ if (excess >= mod - 2 * SCHEDULE_SLOP)
+ start = next + excess - mod + period *
+ DIV_ROUND_UP(mod - excess, period);
+ else
+ start = next + excess + period;
+ if (start - now >= mod) {
+ ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n",
+ urb, start - now - period, period,
+ mod);
status = -EFBIG;
goto fail;
}
- stream->next_uframe = start;
- goto ready;
}
/* need to schedule; when's the next (u)frame we could start?
* can also help high bandwidth if the dma and irq loads don't
* jump until after the queue is primed.
*/
- start = SCHEDULE_SLOP + (now & ~0x07);
- start %= mod;
- stream->next_uframe = start;
-
- /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */
-
- /* find a uframe slot with enough bandwidth */
- for (; start < (stream->next_uframe + period); start++) {
- int enough_space;
-
- /* check schedule: enough space? */
- if (stream->highspeed)
- enough_space = itd_slot_ok (ehci, mod, start,
- stream->usecs, period);
- else {
- if ((start % 8) >= 6)
- continue;
- enough_space = sitd_slot_ok (ehci, mod, stream,
- start, sched, period);
+ else {
+ start = SCHEDULE_SLOP + (now & ~0x07);
+
+ /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */
+
+ /* find a uframe slot with enough bandwidth */
+ next = start + period;
+ for (; start < next; start++) {
+
+ /* check schedule: enough space? */
+ if (stream->highspeed) {
+ if (itd_slot_ok(ehci, mod, start,
+ stream->usecs, period))
+ break;
+ } else {
+ if ((start % 8) >= 6)
+ continue;
+ if (sitd_slot_ok(ehci, mod, stream,
+ start, sched, period))
+ break;
+ }
}
- /* schedule it here if there's enough bandwidth */
- if (enough_space) {
- stream->next_uframe = start % mod;
- goto ready;
+ /* no room in the schedule */
+ if (start == next) {
+ ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n",
+ urb, now, now + mod);
+ status = -ENOSPC;
+ goto fail;
}
}
- /* no room in the schedule */
- ehci_dbg (ehci, "iso %ssched full %p (now %d max %d)\n",
- list_empty (&stream->td_list) ? "" : "re",
- urb, now, now + mod);
- status = -ENOSPC;
+ /* Tried to schedule too far into the future? */
+ if (unlikely(start - now + span - period
+ >= mod - 2 * SCHEDULE_SLOP)) {
+ ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n",
+ urb, start - now, span - period,
+ mod - 2 * SCHEDULE_SLOP);
+ status = -EFBIG;
+ goto fail;
+ }
-fail:
- iso_sched_free (stream, sched);
- urb->hcpriv = NULL;
- return status;
+ stream->next_uframe = start & (mod - 1);
-ready:
/* report high speed start in uframes; full speed, in frames */
urb->start_frame = stream->next_uframe;
if (!stream->highspeed)
urb->start_frame >>= 3;
return 0;
+
+ fail:
+ iso_sched_free(stream, sched);
+ urb->hcpriv = NULL;
+ return status;
}
/*-------------------------------------------------------------------------*/
struct ehci_iso_sched *iso_sched = urb->hcpriv;
struct ehci_itd *itd;
- next_uframe = stream->next_uframe % mod;
+ next_uframe = stream->next_uframe & (mod - 1);
if (unlikely (list_empty(&stream->td_list))) {
ehci_to_hcd(ehci)->self.bandwidth_allocated
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
urb->interval,
next_uframe >> 3, next_uframe & 0x7);
- stream->start = jiffies;
}
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
itd_patch(ehci, itd, iso_sched, packet, uframe);
next_uframe += stream->interval;
- stream->depth += stream->interval;
- next_uframe %= mod;
+ next_uframe &= mod - 1;
packet++;
/* link completed itds into the schedule */
if (((next_uframe >> 3) != frame)
|| packet == urb->number_of_packets) {
- itd_link (ehci, frame % ehci->periodic_size, itd);
+ itd_link(ehci, frame & (ehci->periodic_size - 1), itd);
itd = NULL;
}
}
t = hc32_to_cpup(ehci, &itd->hw_transaction [uframe]);
itd->hw_transaction [uframe] = 0;
- stream->depth -= stream->interval;
/* report transfer status */
if (unlikely (t & ISO_ERRS)) {
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
status = -ESHUTDOWN;
goto done_not_linked;
}
"sched devp %s ep%d%s-iso [%d] %dms/%04x\n",
urb->dev->devpath, stream->bEndpointAddress & 0x0f,
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
- (next_uframe >> 3) % ehci->periodic_size,
+ (next_uframe >> 3) & (ehci->periodic_size - 1),
stream->interval, hc32_to_cpu(ehci, stream->splits));
- stream->start = jiffies;
}
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
sitd->urb = urb;
sitd_patch(ehci, stream, sitd, sched, packet);
- sitd_link (ehci, (next_uframe >> 3) % ehci->periodic_size,
+ sitd_link(ehci, (next_uframe >> 3) & (ehci->periodic_size - 1),
sitd);
next_uframe += stream->interval << 3;
- stream->depth += stream->interval << 3;
}
- stream->next_uframe = next_uframe % mod;
+ stream->next_uframe = next_uframe & (mod - 1);
/* don't need that schedule data any more */
iso_sched_free (stream, sched);
desc->actual_length = desc->length - SITD_LENGTH(t);
urb->actual_length += desc->actual_length;
}
- stream->depth -= stream->interval << 3;
/* handle completion now? */
if ((urb_index + 1) != urb->number_of_packets)
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
status = -ESHUTDOWN;
goto done_not_linked;
}
now_uframe = ehci->next_uframe;
if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
clock = ehci_readl(ehci, &ehci->regs->frame_index);
- clock_frame = (clock >> 3) % ehci->periodic_size;
+ clock_frame = (clock >> 3) & (ehci->periodic_size - 1);
} else {
clock = now_uframe + mod - 1;
clock_frame = -1;
free_cached_lists(ehci);
ehci->clock_frame = clock_frame;
}
- clock %= mod;
+ clock &= mod - 1;
clock_frame = clock >> 3;
for (;;) {
* frame is current.
*/
if (((frame == clock_frame) ||
- (((frame + 1) % ehci->periodic_size)
+ (((frame + 1) & (ehci->periodic_size - 1))
== clock_frame))
&& live
&& (q.sitd->hw_results &
|| ehci->periodic_sched == 0)
break;
ehci->next_uframe = now_uframe;
- now = ehci_readl(ehci, &ehci->regs->frame_index) % mod;
+ now = ehci_readl(ehci, &ehci->regs->frame_index) &
+ (mod - 1);
if (now_uframe == now)
break;
}
} else {
now_uframe++;
- now_uframe %= mod;
+ now_uframe &= mod - 1;
}
}
}
/**
* ehci_hcd_xilinx_of_probe - Probe method for the USB host controller
- * @op: pointer to the of_device to which the host controller bound
+ * @op: pointer to the platform_device bound to the host controller
* @match: pointer to of_device_id structure, not used
*
* This function requests resources and sets up appropriate properties for the
* entry, and sets an appropriate value for hcd->has_tt.
*/
static int __devinit
-ehci_hcd_xilinx_of_probe(struct of_device *op, const struct of_device_id *match)
+ehci_hcd_xilinx_of_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
/**
* ehci_hcd_xilinx_of_remove - shutdown hcd and release resources
- * @op: pointer to of_device structure that is to be removed
+ * @op: pointer to platform_device structure that is to be removed
*
* Remove the hcd structure, and release resources that has been requested
* during probe.
*/
-static int ehci_hcd_xilinx_of_remove(struct of_device *op)
+static int ehci_hcd_xilinx_of_remove(struct platform_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
dev_set_drvdata(&op->dev, NULL);
/**
* ehci_hcd_xilinx_of_shutdown - shutdown the hcd
- * @op: pointer to of_device structure that is to be removed
+ * @op: pointer to platform_device structure that is to be removed
*
* Properly shutdown the hcd, call driver's shutdown routine.
*/
-static int ehci_hcd_xilinx_of_shutdown(struct of_device *op)
+static int ehci_hcd_xilinx_of_shutdown(struct platform_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
unsigned has_amcc_usb23:1;
unsigned need_io_watchdog:1;
unsigned broken_periodic:1;
+ unsigned fs_i_thresh:1; /* Intel iso scheduling */
/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)
#define OHCI_HCCTRL_LEN 0x4
__hc32 *ohci_hcctrl_reg;
unsigned has_hostpc:1;
-
+ unsigned has_lpm:1; /* support link power management */
+ unsigned has_ppcd:1; /* support per-port change bits */
u8 sbrn; /* packed release number */
/* irq statistics */
/* debug files */
#ifdef DEBUG
struct dentry *debug_dir;
- struct dentry *debug_async;
- struct dentry *debug_periodic;
- struct dentry *debug_registers;
#endif
};
u32 refcount;
u8 bEndpointAddress;
u8 highspeed;
- u16 depth; /* depth in uframes */
struct list_head td_list; /* queued itds/sitds */
struct list_head free_list; /* list of unused itds/sitds */
struct usb_device *udev;
struct usb_host_endpoint *ep;
/* output of (re)scheduling */
- unsigned long start; /* jiffies */
- unsigned long rescheduled;
int next_uframe;
__hc32 splits;
/* Prepare the PORTSC wakeup flags during controller suspend/resume */
-#define ehci_prepare_ports_for_controller_suspend(ehci) \
- ehci_adjust_port_wakeup_flags(ehci, true);
+#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup) \
+ ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup);
-#define ehci_prepare_ports_for_controller_resume(ehci) \
- ehci_adjust_port_wakeup_flags(ehci, false);
+#define ehci_prepare_ports_for_controller_resume(ehci) \
+ ehci_adjust_port_wakeup_flags(ehci, false, false);
/*-------------------------------------------------------------------------*/
.hub_control = fhci_hub_control,
};
-static int __devinit of_fhci_probe(struct of_device *ofdev,
+static int __devinit of_fhci_probe(struct platform_device *ofdev,
const struct of_device_id *ofid)
{
struct device *dev = &ofdev->dev;
return 0;
}
-static int __devexit of_fhci_remove(struct of_device *ofdev)
+static int __devexit of_fhci_remove(struct platform_device *ofdev)
{
return fhci_remove(&ofdev->dev);
}
goto error_set_cluster_id;
usb_hcd->uses_new_polling = 1;
- usb_hcd->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags);
usb_hcd->state = HC_STATE_RUNNING;
result = 0;
out:
goto error_alloc;
}
usb_hcd->wireless = 1;
- usb_hcd->flags |= HCD_FLAG_SAW_IRQ;
+ set_bit(HCD_FLAG_SAW_IRQ, &usb_hcd->flags);
wusbhc = usb_hcd_to_wusbhc(usb_hcd);
hwahc = container_of(wusbhc, struct hwahc, wusbhc);
hwahc_init(hwahc);
return -ETIMEDOUT;
}
spin_unlock_irq(&imx21->lock);
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
spin_lock_irq(&imx21->lock);
}
spin_unlock_irqrestore(&imx21->lock, flags);
/*
* Platform specific compile time options
*/
-#if defined(CONFIG_ARCH_KARO)
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/karo.h>
-
-#define USE_32BIT 1
-
-
-/* These options are mutually eclusive */
-#define USE_PLATFORM_DELAY 1
-#define USE_NDELAY 0
-/*
- * MAX_ROOT_PORTS: Number of downstream ports
- *
- * The chip has two USB ports, one of which can be configured as
- * an USB device port, so the value of this constant is implementation
- * specific.
- */
-#define MAX_ROOT_PORTS 2
-#define DUMMY_DELAY_ACCESS do {} while (0)
-
-/* insert platform specific definitions for other machines here */
-#elif defined(CONFIG_BLACKFIN)
+#if defined(CONFIG_BLACKFIN)
#include <linux/io.h>
#define USE_32BIT 0
u32 chipid;
hcd->uses_new_polling = 1;
- hcd->poll_rh = 0;
hcd->state = HC_STATE_RUNNING;
isp1760_enable_interrupts(hcd);
epnum = urb->ep->desc.bEndpointAddress;
spin_lock_irqsave(&priv->lock, flags);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &priv_to_hcd(priv)->flags)) {
+ if (!HCD_HW_ACCESSIBLE(priv_to_hcd(priv))) {
rc = -ESHUTDOWN;
goto done;
}
#endif
#ifdef CONFIG_PPC_OF
-static int of_isp1760_probe(struct of_device *dev,
+static int of_isp1760_probe(struct platform_device *dev,
const struct of_device_id *match)
{
struct usb_hcd *hcd;
return ret;
}
-static int of_isp1760_remove(struct of_device *dev)
+static int of_isp1760_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(&dev->dev);
hcd->product_desc,
hcd_name);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
size -= scnprintf (next, size,
"SUSPENDED (no register access)\n");
goto done;
next += temp;
temp = scnprintf (next, size, "hub poll timer %s\n",
- ohci_to_hcd(ohci)->poll_rh ? "ON" : "off");
+ HCD_POLL_RH(ohci_to_hcd(ohci)) ? "ON" : "off");
size -= temp;
next += temp;
spin_lock_irqsave (&ohci->lock, flags);
/* don't submit to a dead HC */
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
retval = -ENODEV;
goto fail;
}
}
/* use rhsc irqs after khubd is fully initialized */
- hcd->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
hcd->uses_new_polling = 1;
/* start controller operations */
else if (ints & OHCI_INTR_RD) {
ohci_vdbg(ohci, "resume detect\n");
ohci_writel(ohci, OHCI_INTR_RD, ®s->intrstatus);
- hcd->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
if (ohci->autostop) {
spin_lock (&ohci->lock);
ohci_rh_resume (ohci);
spin_lock_irq (&ohci->lock);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
rc = -ESHUTDOWN;
else
rc = ohci_rh_suspend (ohci, 0);
spin_lock_irq (&ohci->lock);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
rc = -ESHUTDOWN;
else
rc = ohci_rh_resume (ohci);
ohci_readl(ohci, &ohci->regs->intrenable);
msleep(20);
}
+
+ /* Does the root hub have a port wakeup pending? */
+ if (ohci_readl(ohci, &ohci->regs->intrstatus) &
+ (OHCI_INTR_RD | OHCI_INTR_RHSC))
+ usb_hcd_resume_root_hub(hcd);
}
/* Carry out polling-, autostop-, and autoresume-related state changes */
int poll_rh = 1;
int rhsc_enable;
- /* Some broken controllers never turn off RHCS in the interrupt
+ /* Some broken controllers never turn off RHSC in the interrupt
* status register. For their sake we won't re-enable RHSC
* interrupts if the interrupt bit is already active.
*/
unsigned long flags;
spin_lock_irqsave (&ohci->lock, flags);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
goto done;
/* undocumented erratum seen on at least rev D */
}
}
- hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
- any_connected, rhsc_status);
+ if (ohci_root_hub_state_changes(ohci, changed,
+ any_connected, rhsc_status))
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ else
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
done:
spin_unlock_irqrestore (&ohci->lock, flags);
u32 temp;
int retval = 0;
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
return -ESHUTDOWN;
switch (typeReq) {
#ifdef CONFIG_PM
-static int ohci_pci_suspend(struct usb_hcd *hcd)
+static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
- normal_i2c);
+ normal_i2c, NULL);
i2c_put_adapter(i2c_adap);
if (!isp1301_i2c_client) {
err("failed to connect I2C to ISP1301 USB Transceiver");
static int __devinit
-ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
+ohci_hcd_ppc_of_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
return rv;
}
-static int ohci_hcd_ppc_of_remove(struct of_device *op)
+static int ohci_hcd_ppc_of_remove(struct platform_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
dev_set_drvdata(&op->dev, NULL);
return 0;
}
-static int ohci_hcd_ppc_of_shutdown(struct of_device *op)
+static int ohci_hcd_ppc_of_shutdown(struct platform_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
{
struct usb_hcd *hcd = ssb_get_drvdata(dev);
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
usb_remove_hcd(hcd);
iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
ssb_device_disable(dev, 0);
}
int err = -ENOMEM;
u32 tmp, flags = 0;
- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
- flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+ return -EOPNOTSUPP;
- ssb_device_enable(dev, flags);
+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
+ /* Put the device into host-mode. */
+ flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+ ssb_device_enable(dev, flags);
+ } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+ /*
+ * USB 2.0 special considerations:
+ *
+ * In addition to the standard SSB reset sequence, the Host
+ * Control Register must be programmed to bring the USB core
+ * and various phy components out of reset.
+ */
+ ssb_device_enable(dev, 0);
+ ssb_write32(dev, 0x200, 0x7ff);
+
+ /* Change Flush control reg */
+ tmp = ssb_read32(dev, 0x400);
+ tmp &= ~8;
+ ssb_write32(dev, 0x400, tmp);
+ tmp = ssb_read32(dev, 0x400);
+
+ /* Change Shim control reg */
+ tmp = ssb_read32(dev, 0x304);
+ tmp &= ~0x100;
+ ssb_write32(dev, 0x304, tmp);
+ tmp = ssb_read32(dev, 0x304);
+
+ udelay(1);
+
+ /* Work around for 5354 failures */
+ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+ /* Change syn01 reg */
+ tmp = 0x00fe00fe;
+ ssb_write32(dev, 0x894, tmp);
+
+ /* Change syn03 reg */
+ tmp = ssb_read32(dev, 0x89c);
+ tmp |= 0x1;
+ ssb_write32(dev, 0x89c, tmp);
+ }
+ } else
+ ssb_device_enable(dev, 0);
hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
dev_name(dev->dev));
static const struct ssb_device_id ssb_ohci_table[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
SSB_DEVTABLE_END
};
MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
#endif
spin_lock_irqsave(&oxu->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &oxu_to_hcd(oxu)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) {
rc = -ESHUTDOWN;
goto done;
}
spin_lock_irqsave(&oxu->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &oxu_to_hcd(oxu)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) {
status = -ESHUTDOWN;
goto done;
}
u32 temp, hcc_params;
hcd->uses_new_polling = 1;
- hcd->poll_rh = 0;
/* EHCI spec section 4.1 */
retval = ehci_reset(oxu);
#endif
/* avoid all allocations within spinlocks */
- if (!hep->hcpriv)
+ if (!hep->hcpriv) {
ep = kzalloc(sizeof *ep, mem_flags);
+ if (ep == NULL)
+ return -ENOMEM;
+ }
spin_lock_irqsave(&sl811->lock, flags);
#include "uhci-hcd.h"
-#define uhci_debug_operations (* (const struct file_operations *) NULL)
static struct dentry *uhci_debugfs_root;
#ifdef DEBUG
{
struct uhci_hcd *uhci = inode->i_private;
struct uhci_debug *up;
- int ret = -ENOMEM;
unsigned long flags;
- lock_kernel();
up = kmalloc(sizeof(*up), GFP_KERNEL);
if (!up)
- goto out;
+ return -ENOMEM;
up->data = kmalloc(MAX_OUTPUT, GFP_KERNEL);
if (!up->data) {
kfree(up);
- goto out;
+ return -ENOMEM;
}
up->size = 0;
file->private_data = up;
- ret = 0;
-out:
- unlock_kernel();
- return ret;
+ return 0;
}
static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence)
struct uhci_debug *up;
loff_t new = -1;
- lock_kernel();
up = file->private_data;
+ /* XXX: atomic 64bit seek access, but that needs to be fixed in the VFS */
switch (whence) {
case 0:
new = off;
new = file->f_pos + off;
break;
}
- if (new < 0 || new > up->size) {
- unlock_kernel();
+
+ if (new < 0 || new > up->size)
return -EINVAL;
- }
- unlock_kernel();
+
return (file->f_pos = new);
}
return 0;
}
-#undef uhci_debug_operations
static const struct file_operations uhci_debug_operations = {
.owner = THIS_MODULE,
.open = uhci_debug_open,
.read = uhci_debug_read,
.release = uhci_debug_release,
};
+#define UHCI_DEBUG_OPS
#endif /* CONFIG_DEBUG_FS */
uhci->rh_state = UHCI_RH_RESET;
uhci->is_stopped = UHCI_IS_STOPPED;
uhci_to_hcd(uhci)->state = HC_STATE_HALT;
- uhci_to_hcd(uhci)->poll_rh = 0;
+ clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
uhci->dead = 0; /* Full reset resurrects the controller */
}
*/
static void configure_hc(struct uhci_hcd *uhci)
{
+ struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
+
/* Set the frame length to the default: 1 ms exactly */
outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
mb();
/* Enable PIRQ */
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
- USBLEGSUP_DEFAULT);
+ pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT);
+
+ /* Disable platform-specific non-PME# wakeup */
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ pci_write_config_byte(pdev, USBRES_INTEL, 0);
}
/* If interrupts don't work and remote wakeup is enabled then
* the suspended root hub needs to be polled.
*/
- uhci_to_hcd(uhci)->poll_rh = (!int_enable && wakeup_enable);
+ if (!int_enable && wakeup_enable)
+ set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
+ else
+ clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
uhci_scan_schedule(uhci);
uhci_fsbr_off(uhci);
uhci->io_addr + USBINTR);
mb();
uhci->rh_state = UHCI_RH_RUNNING;
- uhci_to_hcd(uhci)->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
}
static void wakeup_rh(struct uhci_hcd *uhci)
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int retval = -EBUSY;
int i;
- struct dentry *dentry;
+ struct dentry __maybe_unused *dentry;
hcd->uses_new_polling = 1;
INIT_LIST_HEAD(&uhci->idle_qh_list);
init_waitqueue_head(&uhci->waitqh);
- if (DEBUG_CONFIGURED) {
- dentry = debugfs_create_file(hcd->self.bus_name,
- S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root,
- uhci, &uhci_debug_operations);
- if (!dentry) {
- dev_err(uhci_dev(uhci), "couldn't create uhci "
- "debugfs entry\n");
- retval = -ENOMEM;
- goto err_create_debug_entry;
- }
- uhci->dentry = dentry;
+#ifdef UHCI_DEBUG_OPS
+ dentry = debugfs_create_file(hcd->self.bus_name,
+ S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root,
+ uhci, &uhci_debug_operations);
+ if (!dentry) {
+ dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n");
+ return -ENOMEM;
}
+ uhci->dentry = dentry;
+#endif
uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
UHCI_NUMFRAMES * sizeof(*uhci->frame),
configure_hc(uhci);
uhci->is_initialized = 1;
+ spin_lock_irq(&uhci->lock);
start_rh(uhci);
+ spin_unlock_irq(&uhci->lock);
return 0;
/*
err_alloc_frame:
debugfs_remove(uhci->dentry);
-err_create_debug_entry:
return retval;
}
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
spin_lock_irq(&uhci->lock);
- if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && !uhci->dead)
+ if (HCD_HW_ACCESSIBLE(hcd) && !uhci->dead)
uhci_hc_died(uhci);
uhci_scan_schedule(uhci);
spin_unlock_irq(&uhci->lock);
int rc = 0;
spin_lock_irq(&uhci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
rc = -ESHUTDOWN;
else if (uhci->dead)
; /* Dead controllers tell no tales */
int rc = 0;
spin_lock_irq(&uhci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
rc = -ESHUTDOWN;
else if (!uhci->dead)
wakeup_rh(uhci);
return rc;
}
-static int uhci_pci_suspend(struct usb_hcd *hcd)
+static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
int rc = 0;
dev_dbg(uhci_dev(uhci), "%s\n", __func__);
spin_lock_irq(&uhci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
+ if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
goto done_okay; /* Already suspended or dead */
if (uhci->rh_state > UHCI_RH_SUSPENDED) {
/* All PCI host controllers are required to disable IRQ generation
* at the source, so we must turn off PIRQ.
*/
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
- mb();
- hcd->poll_rh = 0;
-
- /* FIXME: Enable non-PME# remote wakeup? */
+ pci_write_config_word(pdev, USBLEGSUP, 0);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+ /* Enable platform-specific non-PME# wakeup */
+ if (do_wakeup) {
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ pci_write_config_byte(pdev, USBRES_INTEL,
+ USBPORT1EN | USBPORT2EN);
+ }
done_okay:
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
* even if the controller was dead.
*/
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- mb();
spin_lock_irq(&uhci->lock);
if (hibernated)
uhci_hc_died(uhci);
- /* FIXME: Disable non-PME# remote wakeup? */
-
/* The firmware or a boot kernel may have changed the controller
* settings during a system wakeup. Check it and reconfigure
* to avoid problems.
/* If the controller was dead before, it's back alive now */
configure_hc(uhci);
- if (uhci->rh_state == UHCI_RH_RESET) {
-
- /* The controller had to be reset */
+ /* Tell the core if the controller had to be reset */
+ if (uhci->rh_state == UHCI_RH_RESET)
usb_root_hub_lost_power(hcd->self.root_hub);
- suspend_rh(uhci, UHCI_RH_SUSPENDED);
- }
spin_unlock_irq(&uhci->lock);
/* If interrupts don't work and remote wakeup is enabled then
* the suspended root hub needs to be polled.
*/
- if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) {
- hcd->poll_rh = 1;
- usb_hcd_poll_rh_status(hcd);
- }
+ if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup)
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+ /* Does the root hub have a port wakeup pending? */
+ usb_hcd_poll_rh_status(hcd);
return 0;
}
#endif
#define USBPORTSC_RES3 0x4000 /* reserved, write zeroes */
#define USBPORTSC_RES4 0x8000 /* reserved, write zeroes */
-/* Legacy support register */
+/* PCI legacy support register */
#define USBLEGSUP 0xc0
#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
#define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
#define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
+/* PCI Intel-specific resume-enable register */
+#define USBRES_INTEL 0xc4
+#define USBPORT1EN 0x01
+#define USBPORT2EN 0x02
+
#define UHCI_PTR_BITS cpu_to_le32(0x000F)
#define UHCI_PTR_TERM cpu_to_le32(0x0001)
#define UHCI_PTR_QH cpu_to_le32(0x0002)
spin_lock_irqsave(&uhci->lock, flags);
uhci_scan_schedule(uhci);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
+ if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
goto done;
uhci_check_ports(uhci);
case UHCI_RH_SUSPENDING:
case UHCI_RH_SUSPENDED:
/* if port change, ask to be resumed */
- if (status)
+ if (status || uhci->resuming_ports)
usb_hcd_resume_root_hub(hcd);
break;
u16 wPortChange, wPortStatus;
unsigned long flags;
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
+ if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
return -ETIMEDOUT;
spin_lock_irqsave(&uhci->lock, flags);
qh->unlink_frame = uhci->frame_number;
/* Force an interrupt so we know when the QH is fully unlinked */
- if (list_empty(&uhci->skel_unlink_qh->node))
+ if (list_empty(&uhci->skel_unlink_qh->node) || uhci->is_stopped)
uhci_set_next_interrupt(uhci);
/* Move the QH from its old list to the end of the unlinking list */
qh->advance_jiffies = jiffies;
goto done;
}
- ret = 0;
+ ret = uhci->is_stopped;
}
/* The queue hasn't advanced; check for timeout */
whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN);
usb_hcd->uses_new_polling = 1;
- usb_hcd->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags);
usb_hcd->state = HC_STATE_RUNNING;
out:
|| (prev_end & (WHCI_PAGE_SIZE-1))
|| (dma_addr & (WHCI_PAGE_SIZE-1))
|| std->len + WHCI_PAGE_SIZE > QTD_MAX_XFER_SIZE) {
- if (std->len % qset->max_packet != 0)
+ if (std && std->len % qset->max_packet != 0)
return -EINVAL;
std = qset_new_std(whc, qset, urb, mem_flags);
if (std == NULL) {
return ep->stream_info->stream_rings[stream_id];
}
-struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
- unsigned int slot_id, unsigned int ep_index,
- unsigned int stream_id)
-{
- struct xhci_virt_ep *ep;
-
- ep = &xhci->devs[slot_id]->eps[ep_index];
- /* Common case: no streams */
- if (!(ep->ep_state & EP_HAS_STREAMS))
- return ep->ring;
-
- if (stream_id == 0) {
- xhci_warn(xhci,
- "WARN: Slot ID %u, ep index %u has streams, "
- "but URB has no stream ID.\n",
- slot_id, ep_index);
- return NULL;
- }
-
- if (stream_id < ep->stream_info->num_streams)
- return ep->stream_info->stream_rings[stream_id];
-
- xhci_warn(xhci,
- "WARN: Slot ID %u, ep index %u has "
- "stream IDs 1 to %u allocated, "
- "but stream ID %u is requested.\n",
- slot_id, ep_index,
- ep->stream_info->num_streams - 1,
- stream_id);
- return NULL;
-}
-
-/* Get the right ring for the given URB.
- * If the endpoint supports streams, boundary check the URB's stream ID.
- * If the endpoint doesn't support streams, return the singular endpoint ring.
- */
-struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
- struct urb *urb)
-{
- return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
- xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id);
-}
-
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
static int xhci_test_radix_tree(struct xhci_hcd *xhci,
unsigned int num_streams,
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
/* Set up the endpoint ring */
- virt_dev->eps[ep_index].new_ring =
- xhci_ring_alloc(xhci, 1, true, mem_flags);
+ /*
+ * Isochronous endpoint ring needs bigger size because one isoc URB
+ * carries multiple packets and it will insert multiple tds to the
+ * ring.
+ * This should be replaced with dynamic ring resizing in the future.
+ */
+ if (usb_endpoint_xfer_isoc(&ep->desc))
+ virt_dev->eps[ep_index].new_ring =
+ xhci_ring_alloc(xhci, 8, true, mem_flags);
+ else
+ virt_dev->eps[ep_index].new_ring =
+ xhci_ring_alloc(xhci, 1, true, mem_flags);
if (!virt_dev->eps[ep_index].new_ring) {
/* Attempt to use the ring cache */
if (virt_dev->num_rings_cached == 0)
virt_dev->num_rings_cached--;
xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring);
}
+ virt_dev->eps[ep_index].skip = false;
ep_ring = virt_dev->eps[ep_index].new_ring;
ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
return command;
}
+void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv)
+{
+ int last;
+
+ if (!urb_priv)
+ return;
+
+ last = urb_priv->length - 1;
+ if (last >= 0) {
+ int i;
+ for (i = 0; i <= last; i++)
+ kfree(urb_priv->td[i]);
+ }
+ kfree(urb_priv);
+}
+
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command)
{
unsigned int num_tests;
int i, ret;
- num_tests = sizeof(simple_test_vector) / sizeof(simple_test_vector[0]);
+ num_tests = ARRAY_SIZE(simple_test_vector);
for (i = 0; i < num_tests; i++) {
ret = xhci_test_trb_in_td(xhci,
xhci->event_ring->first_seg,
return ret;
}
- num_tests = sizeof(complex_test_vector) / sizeof(complex_test_vector[0]);
+ num_tests = ARRAY_SIZE(complex_test_vector);
for (i = 0; i < num_tests; i++) {
ret = xhci_test_trb_in_td(xhci,
complex_test_vector[i].input_seg,
return 0;
}
+static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
+{
+ u64 temp;
+ dma_addr_t deq;
+
+ deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
+ xhci->event_ring->dequeue);
+ if (deq == 0 && !in_interrupt())
+ xhci_warn(xhci, "WARN something wrong with SW event ring "
+ "dequeue ptr.\n");
+ /* Update HC event ring dequeue pointer */
+ temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp &= ERST_PTR_MASK;
+ /* Don't clear the EHB bit (which is RW1C) because
+ * there might be more events to service.
+ */
+ temp &= ~ERST_EHB;
+ xhci_dbg(xhci, "// Write event ring dequeue pointer, "
+ "preserving EHB bit\n");
+ xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+ &xhci->ir_set->erst_dequeue);
+}
+
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval;
+ u32 temp;
hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
return retval;
xhci_dbg(xhci, "Reset complete\n");
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ if (HCC_64BIT_ADDR(temp)) {
+ xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+ dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
+ } else {
+ dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
+ }
+
xhci_dbg(xhci, "Calling HCD init\n");
/* Initialize HCD and host controller data structures. */
retval = xhci_init(hcd);
return 1;
}
-void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
-{
- u64 temp;
- dma_addr_t deq;
-
- deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
- xhci->event_ring->dequeue);
- if (deq == 0 && !in_interrupt())
- xhci_warn(xhci, "WARN something wrong with SW event ring "
- "dequeue ptr.\n");
- /* Update HC event ring dequeue pointer */
- temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
- temp &= ERST_PTR_MASK;
- /* Don't clear the EHB bit (which is RW1C) because
- * there might be more events to service.
- */
- temp &= ~ERST_EHB;
- xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n");
- xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
- &xhci->ir_set->erst_dequeue);
-}
-
/* Ring the host controller doorbell after placing a command on the ring */
void xhci_ring_cmd_db(struct xhci_hcd *xhci)
{
field = xhci_readl(xhci, db_addr) & DB_MASK;
field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id);
xhci_writel(xhci, field, db_addr);
- /* Flush PCI posted writes - FIXME Matthew Wilcox says this
- * isn't time-critical and we shouldn't make the CPU wait for
- * the flush.
- */
- xhci_readl(xhci, db_addr);
}
}
return cur_seg;
}
+
+static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ unsigned int stream_id)
+{
+ struct xhci_virt_ep *ep;
+
+ ep = &xhci->devs[slot_id]->eps[ep_index];
+ /* Common case: no streams */
+ if (!(ep->ep_state & EP_HAS_STREAMS))
+ return ep->ring;
+
+ if (stream_id == 0) {
+ xhci_warn(xhci,
+ "WARN: Slot ID %u, ep index %u has streams, "
+ "but URB has no stream ID.\n",
+ slot_id, ep_index);
+ return NULL;
+ }
+
+ if (stream_id < ep->stream_info->num_streams)
+ return ep->stream_info->stream_rings[stream_id];
+
+ xhci_warn(xhci,
+ "WARN: Slot ID %u, ep index %u has "
+ "stream IDs 1 to %u allocated, "
+ "but stream ID %u is requested.\n",
+ slot_id, ep_index,
+ ep->stream_info->num_streams - 1,
+ stream_id);
+ return NULL;
+}
+
+/* Get the right ring for the given URB.
+ * If the endpoint supports streams, boundary check the URB's stream ID.
+ * If the endpoint doesn't support streams, return the singular endpoint ring.
+ */
+static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
+ struct urb *urb)
+{
+ return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
+ xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id);
+}
+
/*
* Move the xHC's endpoint ring dequeue pointer past cur_td.
* Record the new state of the xHC's endpoint ring dequeue segment,
struct xhci_td *cur_td, int status, char *adjective)
{
struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ struct urb *urb;
+ struct urb_priv *urb_priv;
- cur_td->urb->hcpriv = NULL;
- usb_hcd_unlink_urb_from_ep(hcd, cur_td->urb);
- xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, cur_td->urb);
+ urb = cur_td->urb;
+ urb_priv = urb->hcpriv;
+ urb_priv->td_cnt++;
- spin_unlock(&xhci->lock);
- usb_hcd_giveback_urb(hcd, cur_td->urb, status);
- kfree(cur_td);
- spin_lock(&xhci->lock);
- xhci_dbg(xhci, "%s URB given back\n", adjective);
+ /* Only giveback urb when this is the last td in urb */
+ if (urb_priv->td_cnt == urb_priv->length) {
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb);
+
+ spin_unlock(&xhci->lock);
+ usb_hcd_giveback_urb(hcd, urb, status);
+ xhci_urb_free_priv(xhci, urb_priv);
+ spin_lock(&xhci->lock);
+ xhci_dbg(xhci, "%s URB given back\n", adjective);
+ }
}
/*
/* Update event ring dequeue pointer before dropping the lock */
inc_deq(xhci, xhci->event_ring, true);
- xhci_set_hc_event_deq(xhci);
spin_unlock(&xhci->lock);
/* Pass this up to the core */
}
/*
- * If this function returns an error condition, it means it got a Transfer
- * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
- * At this point, the host controller is probably hosed and should be reset.
+ * Finish the td processing, remove the td from td list;
+ * Return 1 if the urb can be given back.
*/
-static int handle_tx_event(struct xhci_hcd *xhci,
- struct xhci_transfer_event *event)
+static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
+ union xhci_trb *event_trb, struct xhci_transfer_event *event,
+ struct xhci_virt_ep *ep, int *status, bool skip)
{
struct xhci_virt_device *xdev;
- struct xhci_virt_ep *ep;
struct xhci_ring *ep_ring;
unsigned int slot_id;
int ep_index;
- struct xhci_td *td = NULL;
- dma_addr_t event_dma;
- struct xhci_segment *event_seg;
- union xhci_trb *event_trb;
struct urb *urb = NULL;
- int status = -EINPROGRESS;
struct xhci_ep_ctx *ep_ctx;
+ int ret = 0;
+ struct urb_priv *urb_priv;
u32 trb_comp_code;
- xhci_dbg(xhci, "In %s\n", __func__);
slot_id = TRB_TO_SLOT_ID(event->flags);
xdev = xhci->devs[slot_id];
- if (!xdev) {
- xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
- return -ENODEV;
- }
-
- /* Endpoint ID is 1 based, our index is zero based */
ep_index = TRB_TO_EP_ID(event->flags) - 1;
- xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
- ep = &xdev->eps[ep_index];
ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
- if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
- xhci_err(xhci, "ERROR Transfer event for disabled endpoint "
- "or incorrect stream ring\n");
- return -ENODEV;
- }
-
- event_dma = event->buffer;
- /* This TRB should be in the TD at the head of this ring's TD list */
- xhci_dbg(xhci, "%s - checking for list empty\n", __func__);
- if (list_empty(&ep_ring->td_list)) {
- xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
- TRB_TO_SLOT_ID(event->flags), ep_index);
- xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
- (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
- xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
- urb = NULL;
- goto cleanup;
- }
- xhci_dbg(xhci, "%s - getting list entry\n", __func__);
- td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
-
- /* Is this a TRB in the currently executing TD? */
- xhci_dbg(xhci, "%s - looking for TD\n", __func__);
- event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
- td->last_trb, event_dma);
- xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg);
- if (!event_seg) {
- /* HC is busted, give up! */
- xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
- return -ESHUTDOWN;
- }
- event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
- xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
- (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
- xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n",
- lower_32_bits(event->buffer));
- xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n",
- upper_32_bits(event->buffer));
- xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
- (unsigned int) event->transfer_len);
- xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
- (unsigned int) event->flags);
-
- /* Look for common error cases */
trb_comp_code = GET_COMP_CODE(event->transfer_len);
- switch (trb_comp_code) {
- /* Skip codes that require special handling depending on
- * transfer type
- */
- case COMP_SUCCESS:
- case COMP_SHORT_TX:
- break;
- case COMP_STOP:
- xhci_dbg(xhci, "Stopped on Transfer TRB\n");
- break;
- case COMP_STOP_INVAL:
- xhci_dbg(xhci, "Stopped on No-op or Link TRB\n");
- break;
- case COMP_STALL:
- xhci_warn(xhci, "WARN: Stalled endpoint\n");
- ep->ep_state |= EP_HALTED;
- status = -EPIPE;
- break;
- case COMP_TRB_ERR:
- xhci_warn(xhci, "WARN: TRB error on endpoint\n");
- status = -EILSEQ;
- break;
- case COMP_SPLIT_ERR:
- case COMP_TX_ERR:
- xhci_warn(xhci, "WARN: transfer error on endpoint\n");
- status = -EPROTO;
- break;
- case COMP_BABBLE:
- xhci_warn(xhci, "WARN: babble error on endpoint\n");
- status = -EOVERFLOW;
- break;
- case COMP_DB_ERR:
- xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
- status = -ENOSR;
- break;
- default:
- if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
- status = 0;
- break;
- }
- xhci_warn(xhci, "ERROR Unknown event condition, HC probably busted\n");
- urb = NULL;
- goto cleanup;
- }
- /* Now update the urb's actual_length and give back to the core */
- /* Was this a control transfer? */
- if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
- xhci_debug_trb(xhci, xhci->event_ring->dequeue);
- switch (trb_comp_code) {
- case COMP_SUCCESS:
- if (event_trb == ep_ring->dequeue) {
- xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n");
- status = -ESHUTDOWN;
- } else if (event_trb != td->last_trb) {
- xhci_warn(xhci, "WARN: Success on ctrl data TRB without IOC set??\n");
- status = -ESHUTDOWN;
- } else {
- xhci_dbg(xhci, "Successful control transfer!\n");
- status = 0;
- }
- break;
- case COMP_SHORT_TX:
- xhci_warn(xhci, "WARN: short transfer on control ep\n");
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
- break;
-
- default:
- if (!xhci_requires_manual_halt_cleanup(xhci,
- ep_ctx, trb_comp_code))
- break;
- xhci_dbg(xhci, "TRB error code %u, "
- "halted endpoint index = %u\n",
- trb_comp_code, ep_index);
- /* else fall through */
- case COMP_STALL:
- /* Did we transfer part of the data (middle) phase? */
- if (event_trb != ep_ring->dequeue &&
- event_trb != td->last_trb)
- td->urb->actual_length =
- td->urb->transfer_buffer_length
- - TRB_LEN(event->transfer_len);
- else
- td->urb->actual_length = 0;
- xhci_cleanup_halted_endpoint(xhci,
- slot_id, ep_index, 0, td, event_trb);
- goto td_cleanup;
- }
- /*
- * Did we transfer any data, despite the errors that might have
- * happened? I.e. did we get past the setup stage?
- */
- if (event_trb != ep_ring->dequeue) {
- /* The event was for the status stage */
- if (event_trb == td->last_trb) {
- if (td->urb->actual_length != 0) {
- /* Don't overwrite a previously set error code */
- if ((status == -EINPROGRESS ||
- status == 0) &&
- (td->urb->transfer_flags
- & URB_SHORT_NOT_OK))
- /* Did we already see a short data stage? */
- status = -EREMOTEIO;
- } else {
- td->urb->actual_length =
- td->urb->transfer_buffer_length;
- }
- } else {
- /* Maybe the event was for the data stage? */
- if (trb_comp_code != COMP_STOP_INVAL) {
- /* We didn't stop on a link TRB in the middle */
- td->urb->actual_length =
- td->urb->transfer_buffer_length -
- TRB_LEN(event->transfer_len);
- xhci_dbg(xhci, "Waiting for status stage event\n");
- urb = NULL;
- goto cleanup;
- }
- }
- }
- } else {
- switch (trb_comp_code) {
- case COMP_SUCCESS:
- /* Double check that the HW transferred everything. */
- if (event_trb != td->last_trb) {
- xhci_warn(xhci, "WARN Successful completion "
- "on short TX\n");
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
- } else {
- if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
- xhci_dbg(xhci, "Successful bulk "
- "transfer!\n");
- else
- xhci_dbg(xhci, "Successful interrupt "
- "transfer!\n");
- status = 0;
- }
- break;
- case COMP_SHORT_TX:
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
- break;
- default:
- /* Others already handled above */
- break;
- }
- dev_dbg(&td->urb->dev->dev,
- "ep %#x - asked for %d bytes, "
- "%d bytes untransferred\n",
- td->urb->ep->desc.bEndpointAddress,
- td->urb->transfer_buffer_length,
- TRB_LEN(event->transfer_len));
- /* Fast path - was this the last TRB in the TD for this URB? */
- if (event_trb == td->last_trb) {
- if (TRB_LEN(event->transfer_len) != 0) {
- td->urb->actual_length =
- td->urb->transfer_buffer_length -
- TRB_LEN(event->transfer_len);
- if (td->urb->transfer_buffer_length <
- td->urb->actual_length) {
- xhci_warn(xhci, "HC gave bad length "
- "of %d bytes left\n",
- TRB_LEN(event->transfer_len));
- td->urb->actual_length = 0;
- if (td->urb->transfer_flags &
- URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
- }
- /* Don't overwrite a previously set error code */
- if (status == -EINPROGRESS) {
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
- }
- } else {
- td->urb->actual_length = td->urb->transfer_buffer_length;
- /* Ignore a short packet completion if the
- * untransferred length was zero.
- */
- if (status == -EREMOTEIO)
- status = 0;
- }
- } else {
- /* Slow path - walk the list, starting from the dequeue
- * pointer, to get the actual length transferred.
- */
- union xhci_trb *cur_trb;
- struct xhci_segment *cur_seg;
+ if (skip)
+ goto td_cleanup;
- td->urb->actual_length = 0;
- for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
- cur_trb != event_trb;
- next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
- if ((cur_trb->generic.field[3] &
- TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
- (cur_trb->generic.field[3] &
- TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
- td->urb->actual_length +=
- TRB_LEN(cur_trb->generic.field[2]);
- }
- /* If the ring didn't stop on a Link or No-op TRB, add
- * in the actual bytes transferred from the Normal TRB
- */
- if (trb_comp_code != COMP_STOP_INVAL)
- td->urb->actual_length +=
- TRB_LEN(cur_trb->generic.field[2]) -
- TRB_LEN(event->transfer_len);
- }
- }
if (trb_comp_code == COMP_STOP_INVAL ||
trb_comp_code == COMP_STOP) {
/* The Endpoint Stop Command completion will take care of any
*/
ep->stopped_td = td;
ep->stopped_trb = event_trb;
+ return 0;
} else {
if (trb_comp_code == COMP_STALL) {
/* The transfer is completed from the driver's
* xHCI hardware manually.
*/
xhci_cleanup_halted_endpoint(xhci,
- slot_id, ep_index, ep_ring->stream_id, td, event_trb);
+ slot_id, ep_index, ep_ring->stream_id,
+ td, event_trb);
} else {
/* Update ring dequeue pointer */
while (ep_ring->dequeue != td->last_trb)
td_cleanup:
/* Clean up the endpoint's TD list */
urb = td->urb;
+ urb_priv = urb->hcpriv;
+
/* Do one last check of the actual transfer length.
* If the host controller said we transferred more data than
* the buffer length, urb->actual_length will be a very big
urb->actual_length);
urb->actual_length = 0;
if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
+ *status = -EREMOTEIO;
else
- status = 0;
+ *status = 0;
}
list_del(&td->td_list);
/* Was this TD slated to be cancelled but completed anyway? */
if (!list_empty(&td->cancelled_td_list))
list_del(&td->cancelled_td_list);
- /* Leave the TD around for the reset endpoint function to use
- * (but only if it's not a control endpoint, since we already
- * queued the Set TR dequeue pointer command for stalled
- * control endpoints).
- */
- if (usb_endpoint_xfer_control(&urb->ep->desc) ||
- (trb_comp_code != COMP_STALL &&
- trb_comp_code != COMP_BABBLE)) {
- kfree(td);
- }
- urb->hcpriv = NULL;
+ urb_priv->td_cnt++;
+ /* Giveback the urb when all the tds are completed */
+ if (urb_priv->td_cnt == urb_priv->length)
+ ret = 1;
}
-cleanup:
- inc_deq(xhci, xhci->event_ring, true);
- xhci_set_hc_event_deq(xhci);
- /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
- if (urb) {
- usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
- xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
- urb, urb->actual_length, status);
- spin_unlock(&xhci->lock);
- usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
- spin_lock(&xhci->lock);
- }
- return 0;
+ return ret;
}
/*
- * This function handles all OS-owned events on the event ring. It may drop
- * xhci->lock between event processing (e.g. to pass up port status changes).
+ * Process control tds, update urb status and actual_length.
*/
-void xhci_handle_event(struct xhci_hcd *xhci)
+static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
+ union xhci_trb *event_trb, struct xhci_transfer_event *event,
+ struct xhci_virt_ep *ep, int *status)
{
- union xhci_trb *event;
- int update_ptrs = 1;
- int ret;
-
- xhci_dbg(xhci, "In %s\n", __func__);
- if (!xhci->event_ring || !xhci->event_ring->dequeue) {
- xhci->error_bitmask |= 1 << 1;
- return;
- }
+ struct xhci_virt_device *xdev;
+ struct xhci_ring *ep_ring;
+ unsigned int slot_id;
+ int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 trb_comp_code;
- event = xhci->event_ring->dequeue;
- /* Does the HC or OS own the TRB? */
- if ((event->event_cmd.flags & TRB_CYCLE) !=
- xhci->event_ring->cycle_state) {
- xhci->error_bitmask |= 1 << 2;
- return;
- }
- xhci_dbg(xhci, "%s - OS owns TRB\n", __func__);
+ slot_id = TRB_TO_SLOT_ID(event->flags);
+ xdev = xhci->devs[slot_id];
+ ep_index = TRB_TO_EP_ID(event->flags) - 1;
+ ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+ ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+ trb_comp_code = GET_COMP_CODE(event->transfer_len);
- /* FIXME: Handle more event types. */
- switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
- case TRB_TYPE(TRB_COMPLETION):
- xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__);
- handle_cmd_completion(xhci, &event->event_cmd);
- xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__);
- break;
- case TRB_TYPE(TRB_PORT_STATUS):
- xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__);
- handle_port_status(xhci, event);
- xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__);
- update_ptrs = 0;
+ xhci_debug_trb(xhci, xhci->event_ring->dequeue);
+ switch (trb_comp_code) {
+ case COMP_SUCCESS:
+ if (event_trb == ep_ring->dequeue) {
+ xhci_warn(xhci, "WARN: Success on ctrl setup TRB "
+ "without IOC set??\n");
+ *status = -ESHUTDOWN;
+ } else if (event_trb != td->last_trb) {
+ xhci_warn(xhci, "WARN: Success on ctrl data TRB "
+ "without IOC set??\n");
+ *status = -ESHUTDOWN;
+ } else {
+ xhci_dbg(xhci, "Successful control transfer!\n");
+ *status = 0;
+ }
break;
- case TRB_TYPE(TRB_TRANSFER):
- xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__);
- ret = handle_tx_event(xhci, &event->trans_event);
- xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__);
- if (ret < 0)
- xhci->error_bitmask |= 1 << 9;
+ case COMP_SHORT_TX:
+ xhci_warn(xhci, "WARN: short transfer on control ep\n");
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
else
- update_ptrs = 0;
+ *status = 0;
break;
default:
- if ((event->event_cmd.flags & TRB_TYPE_BITMASK) >= TRB_TYPE(48))
- handle_vendor_event(xhci, event);
+ if (!xhci_requires_manual_halt_cleanup(xhci,
+ ep_ctx, trb_comp_code))
+ break;
+ xhci_dbg(xhci, "TRB error code %u, "
+ "halted endpoint index = %u\n",
+ trb_comp_code, ep_index);
+ /* else fall through */
+ case COMP_STALL:
+ /* Did we transfer part of the data (middle) phase? */
+ if (event_trb != ep_ring->dequeue &&
+ event_trb != td->last_trb)
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length
+ - TRB_LEN(event->transfer_len);
else
- xhci->error_bitmask |= 1 << 3;
+ td->urb->actual_length = 0;
+
+ xhci_cleanup_halted_endpoint(xhci,
+ slot_id, ep_index, 0, td, event_trb);
+ return finish_td(xhci, td, event_trb, event, ep, status, true);
}
- /* Any of the above functions may drop and re-acquire the lock, so check
- * to make sure a watchdog timer didn't mark the host as non-responsive.
+ /*
+ * Did we transfer any data, despite the errors that might have
+ * happened? I.e. did we get past the setup stage?
*/
- if (xhci->xhc_state & XHCI_STATE_DYING) {
- xhci_dbg(xhci, "xHCI host dying, returning from "
- "event handler.\n");
- return;
+ if (event_trb != ep_ring->dequeue) {
+ /* The event was for the status stage */
+ if (event_trb == td->last_trb) {
+ if (td->urb->actual_length != 0) {
+ /* Don't overwrite a previously set error code
+ */
+ if ((*status == -EINPROGRESS || *status == 0) &&
+ (td->urb->transfer_flags
+ & URB_SHORT_NOT_OK))
+ /* Did we already see a short data
+ * stage? */
+ *status = -EREMOTEIO;
+ } else {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length;
+ }
+ } else {
+ /* Maybe the event was for the data stage? */
+ if (trb_comp_code != COMP_STOP_INVAL) {
+ /* We didn't stop on a link TRB in the middle */
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length -
+ TRB_LEN(event->transfer_len);
+ xhci_dbg(xhci, "Waiting for status "
+ "stage event\n");
+ return 0;
+ }
+ }
}
- if (update_ptrs) {
- /* Update SW and HC event ring dequeue pointer */
- inc_deq(xhci, xhci->event_ring, true);
- xhci_set_hc_event_deq(xhci);
+ return finish_td(xhci, td, event_trb, event, ep, status, false);
+}
+
+/*
+ * Process isochronous tds, update urb packet status and actual_length.
+ */
+static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
+ union xhci_trb *event_trb, struct xhci_transfer_event *event,
+ struct xhci_virt_ep *ep, int *status)
+{
+ struct xhci_ring *ep_ring;
+ struct urb_priv *urb_priv;
+ int idx;
+ int len = 0;
+ int skip_td = 0;
+ union xhci_trb *cur_trb;
+ struct xhci_segment *cur_seg;
+ u32 trb_comp_code;
+
+ ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+ trb_comp_code = GET_COMP_CODE(event->transfer_len);
+ urb_priv = td->urb->hcpriv;
+ idx = urb_priv->td_cnt;
+
+ if (ep->skip) {
+ /* The transfer is partly done */
+ *status = -EXDEV;
+ td->urb->iso_frame_desc[idx].status = -EXDEV;
+ } else {
+ /* handle completion code */
+ switch (trb_comp_code) {
+ case COMP_SUCCESS:
+ td->urb->iso_frame_desc[idx].status = 0;
+ xhci_dbg(xhci, "Successful isoc transfer!\n");
+ break;
+ case COMP_SHORT_TX:
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ td->urb->iso_frame_desc[idx].status =
+ -EREMOTEIO;
+ else
+ td->urb->iso_frame_desc[idx].status = 0;
+ break;
+ case COMP_BW_OVER:
+ td->urb->iso_frame_desc[idx].status = -ECOMM;
+ skip_td = 1;
+ break;
+ case COMP_BUFF_OVER:
+ case COMP_BABBLE:
+ td->urb->iso_frame_desc[idx].status = -EOVERFLOW;
+ skip_td = 1;
+ break;
+ case COMP_STALL:
+ td->urb->iso_frame_desc[idx].status = -EPROTO;
+ skip_td = 1;
+ break;
+ case COMP_STOP:
+ case COMP_STOP_INVAL:
+ break;
+ default:
+ td->urb->iso_frame_desc[idx].status = -1;
+ break;
+ }
+ }
+
+ /* calc actual length */
+ if (ep->skip) {
+ td->urb->iso_frame_desc[idx].actual_length = 0;
+ return finish_td(xhci, td, event_trb, event, ep, status, true);
+ }
+
+ if (trb_comp_code == COMP_SUCCESS || skip_td == 1) {
+ td->urb->iso_frame_desc[idx].actual_length =
+ td->urb->iso_frame_desc[idx].length;
+ td->urb->actual_length +=
+ td->urb->iso_frame_desc[idx].length;
+ } else {
+ for (cur_trb = ep_ring->dequeue,
+ cur_seg = ep_ring->deq_seg; cur_trb != event_trb;
+ next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+ if ((cur_trb->generic.field[3] &
+ TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
+ (cur_trb->generic.field[3] &
+ TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
+ len +=
+ TRB_LEN(cur_trb->generic.field[2]);
+ }
+ len += TRB_LEN(cur_trb->generic.field[2]) -
+ TRB_LEN(event->transfer_len);
+
+ if (trb_comp_code != COMP_STOP_INVAL) {
+ td->urb->iso_frame_desc[idx].actual_length = len;
+ td->urb->actual_length += len;
+ }
+ }
+
+ if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS)
+ *status = 0;
+
+ return finish_td(xhci, td, event_trb, event, ep, status, false);
+}
+
+/*
+ * Process bulk and interrupt tds, update urb status and actual_length.
+ */
+static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
+ union xhci_trb *event_trb, struct xhci_transfer_event *event,
+ struct xhci_virt_ep *ep, int *status)
+{
+ struct xhci_ring *ep_ring;
+ union xhci_trb *cur_trb;
+ struct xhci_segment *cur_seg;
+ u32 trb_comp_code;
+
+ ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+ trb_comp_code = GET_COMP_CODE(event->transfer_len);
+
+ switch (trb_comp_code) {
+ case COMP_SUCCESS:
+ /* Double check that the HW transferred everything. */
+ if (event_trb != td->last_trb) {
+ xhci_warn(xhci, "WARN Successful completion "
+ "on short TX\n");
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ } else {
+ if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
+ xhci_dbg(xhci, "Successful bulk "
+ "transfer!\n");
+ else
+ xhci_dbg(xhci, "Successful interrupt "
+ "transfer!\n");
+ *status = 0;
+ }
+ break;
+ case COMP_SHORT_TX:
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ break;
+ default:
+ /* Others already handled above */
+ break;
+ }
+ dev_dbg(&td->urb->dev->dev,
+ "ep %#x - asked for %d bytes, "
+ "%d bytes untransferred\n",
+ td->urb->ep->desc.bEndpointAddress,
+ td->urb->transfer_buffer_length,
+ TRB_LEN(event->transfer_len));
+ /* Fast path - was this the last TRB in the TD for this URB? */
+ if (event_trb == td->last_trb) {
+ if (TRB_LEN(event->transfer_len) != 0) {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length -
+ TRB_LEN(event->transfer_len);
+ if (td->urb->transfer_buffer_length <
+ td->urb->actual_length) {
+ xhci_warn(xhci, "HC gave bad length "
+ "of %d bytes left\n",
+ TRB_LEN(event->transfer_len));
+ td->urb->actual_length = 0;
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ }
+ /* Don't overwrite a previously set error code */
+ if (*status == -EINPROGRESS) {
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ }
+ } else {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length;
+ /* Ignore a short packet completion if the
+ * untransferred length was zero.
+ */
+ if (*status == -EREMOTEIO)
+ *status = 0;
+ }
+ } else {
+ /* Slow path - walk the list, starting from the dequeue
+ * pointer, to get the actual length transferred.
+ */
+ td->urb->actual_length = 0;
+ for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
+ cur_trb != event_trb;
+ next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+ if ((cur_trb->generic.field[3] &
+ TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
+ (cur_trb->generic.field[3] &
+ TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
+ td->urb->actual_length +=
+ TRB_LEN(cur_trb->generic.field[2]);
+ }
+ /* If the ring didn't stop on a Link or No-op TRB, add
+ * in the actual bytes transferred from the Normal TRB
+ */
+ if (trb_comp_code != COMP_STOP_INVAL)
+ td->urb->actual_length +=
+ TRB_LEN(cur_trb->generic.field[2]) -
+ TRB_LEN(event->transfer_len);
+ }
+
+ return finish_td(xhci, td, event_trb, event, ep, status, false);
+}
+
+/*
+ * If this function returns an error condition, it means it got a Transfer
+ * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
+ * At this point, the host controller is probably hosed and should be reset.
+ */
+static int handle_tx_event(struct xhci_hcd *xhci,
+ struct xhci_transfer_event *event)
+{
+ struct xhci_virt_device *xdev;
+ struct xhci_virt_ep *ep;
+ struct xhci_ring *ep_ring;
+ unsigned int slot_id;
+ int ep_index;
+ struct xhci_td *td = NULL;
+ dma_addr_t event_dma;
+ struct xhci_segment *event_seg;
+ union xhci_trb *event_trb;
+ struct urb *urb = NULL;
+ int status = -EINPROGRESS;
+ struct urb_priv *urb_priv;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 trb_comp_code;
+ int ret = 0;
+
+ slot_id = TRB_TO_SLOT_ID(event->flags);
+ xdev = xhci->devs[slot_id];
+ if (!xdev) {
+ xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
+ return -ENODEV;
+ }
+
+ /* Endpoint ID is 1 based, our index is zero based */
+ ep_index = TRB_TO_EP_ID(event->flags) - 1;
+ xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
+ ep = &xdev->eps[ep_index];
+ ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+ ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+ if (!ep_ring ||
+ (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+ xhci_err(xhci, "ERROR Transfer event for disabled endpoint "
+ "or incorrect stream ring\n");
+ return -ENODEV;
}
+
+ event_dma = event->buffer;
+ trb_comp_code = GET_COMP_CODE(event->transfer_len);
+ /* Look for common error cases */
+ switch (trb_comp_code) {
+ /* Skip codes that require special handling depending on
+ * transfer type
+ */
+ case COMP_SUCCESS:
+ case COMP_SHORT_TX:
+ break;
+ case COMP_STOP:
+ xhci_dbg(xhci, "Stopped on Transfer TRB\n");
+ break;
+ case COMP_STOP_INVAL:
+ xhci_dbg(xhci, "Stopped on No-op or Link TRB\n");
+ break;
+ case COMP_STALL:
+ xhci_warn(xhci, "WARN: Stalled endpoint\n");
+ ep->ep_state |= EP_HALTED;
+ status = -EPIPE;
+ break;
+ case COMP_TRB_ERR:
+ xhci_warn(xhci, "WARN: TRB error on endpoint\n");
+ status = -EILSEQ;
+ break;
+ case COMP_SPLIT_ERR:
+ case COMP_TX_ERR:
+ xhci_warn(xhci, "WARN: transfer error on endpoint\n");
+ status = -EPROTO;
+ break;
+ case COMP_BABBLE:
+ xhci_warn(xhci, "WARN: babble error on endpoint\n");
+ status = -EOVERFLOW;
+ break;
+ case COMP_DB_ERR:
+ xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
+ status = -ENOSR;
+ break;
+ case COMP_BW_OVER:
+ xhci_warn(xhci, "WARN: bandwidth overrun event on endpoint\n");
+ break;
+ case COMP_BUFF_OVER:
+ xhci_warn(xhci, "WARN: buffer overrun event on endpoint\n");
+ break;
+ case COMP_UNDERRUN:
+ /*
+ * When the Isoch ring is empty, the xHC will generate
+ * a Ring Overrun Event for IN Isoch endpoint or Ring
+ * Underrun Event for OUT Isoch endpoint.
+ */
+ xhci_dbg(xhci, "underrun event on endpoint\n");
+ if (!list_empty(&ep_ring->td_list))
+ xhci_dbg(xhci, "Underrun Event for slot %d ep %d "
+ "still with TDs queued?\n",
+ TRB_TO_SLOT_ID(event->flags), ep_index);
+ goto cleanup;
+ case COMP_OVERRUN:
+ xhci_dbg(xhci, "overrun event on endpoint\n");
+ if (!list_empty(&ep_ring->td_list))
+ xhci_dbg(xhci, "Overrun Event for slot %d ep %d "
+ "still with TDs queued?\n",
+ TRB_TO_SLOT_ID(event->flags), ep_index);
+ goto cleanup;
+ case COMP_MISSED_INT:
+ /*
+ * When encounter missed service error, one or more isoc tds
+ * may be missed by xHC.
+ * Set skip flag of the ep_ring; Complete the missed tds as
+ * short transfer when process the ep_ring next time.
+ */
+ ep->skip = true;
+ xhci_dbg(xhci, "Miss service interval error, set skip flag\n");
+ goto cleanup;
+ default:
+ if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
+ status = 0;
+ break;
+ }
+ xhci_warn(xhci, "ERROR Unknown event condition, HC probably "
+ "busted\n");
+ goto cleanup;
+ }
+
+ do {
+ /* This TRB should be in the TD at the head of this ring's
+ * TD list.
+ */
+ if (list_empty(&ep_ring->td_list)) {
+ xhci_warn(xhci, "WARN Event TRB for slot %d ep %d "
+ "with no TDs queued?\n",
+ TRB_TO_SLOT_ID(event->flags), ep_index);
+ xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+ (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
+ xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+ if (ep->skip) {
+ ep->skip = false;
+ xhci_dbg(xhci, "td_list is empty while skip "
+ "flag set. Clear skip flag.\n");
+ }
+ ret = 0;
+ goto cleanup;
+ }
+
+ td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+ /* Is this a TRB in the currently executing TD? */
+ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
+ td->last_trb, event_dma);
+ if (event_seg && ep->skip) {
+ xhci_dbg(xhci, "Found td. Clear skip flag.\n");
+ ep->skip = false;
+ }
+ if (!event_seg &&
+ (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc))) {
+ /* HC is busted, give up! */
+ xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not "
+ "part of current TD\n");
+ return -ESHUTDOWN;
+ }
+
+ if (event_seg) {
+ event_trb = &event_seg->trbs[(event_dma -
+ event_seg->dma) / sizeof(*event_trb)];
+ /*
+ * No-op TRB should not trigger interrupts.
+ * If event_trb is a no-op TRB, it means the
+ * corresponding TD has been cancelled. Just ignore
+ * the TD.
+ */
+ if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_TR_NOOP)) {
+ xhci_dbg(xhci, "event_trb is a no-op TRB. "
+ "Skip it\n");
+ goto cleanup;
+ }
+ }
+
+ /* Now update the urb's actual_length and give back to
+ * the core
+ */
+ if (usb_endpoint_xfer_control(&td->urb->ep->desc))
+ ret = process_ctrl_td(xhci, td, event_trb, event, ep,
+ &status);
+ else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
+ ret = process_isoc_td(xhci, td, event_trb, event, ep,
+ &status);
+ else
+ ret = process_bulk_intr_td(xhci, td, event_trb, event,
+ ep, &status);
+
+cleanup:
+ /*
+ * Do not update event ring dequeue pointer if ep->skip is set.
+ * Will roll back to continue process missed tds.
+ */
+ if (trb_comp_code == COMP_MISSED_INT || !ep->skip) {
+ inc_deq(xhci, xhci->event_ring, true);
+ }
+
+ if (ret) {
+ urb = td->urb;
+ urb_priv = urb->hcpriv;
+ /* Leave the TD around for the reset endpoint function
+ * to use(but only if it's not a control endpoint,
+ * since we already queued the Set TR dequeue pointer
+ * command for stalled control endpoints).
+ */
+ if (usb_endpoint_xfer_control(&urb->ep->desc) ||
+ (trb_comp_code != COMP_STALL &&
+ trb_comp_code != COMP_BABBLE))
+ xhci_urb_free_priv(xhci, urb_priv);
+
+ usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+ xhci_dbg(xhci, "Giveback URB %p, len = %d, "
+ "status = %d\n",
+ urb, urb->actual_length, status);
+ spin_unlock(&xhci->lock);
+ usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
+ spin_lock(&xhci->lock);
+ }
+
+ /*
+ * If ep->skip is set, it means there are missed tds on the
+ * endpoint ring need to take care of.
+ * Process them as short transfer until reach the td pointed by
+ * the event.
+ */
+ } while (ep->skip && trb_comp_code != COMP_MISSED_INT);
+
+ return 0;
+}
+
+/*
+ * This function handles all OS-owned events on the event ring. It may drop
+ * xhci->lock between event processing (e.g. to pass up port status changes).
+ */
+static void xhci_handle_event(struct xhci_hcd *xhci)
+{
+ union xhci_trb *event;
+ int update_ptrs = 1;
+ int ret;
+
+ xhci_dbg(xhci, "In %s\n", __func__);
+ if (!xhci->event_ring || !xhci->event_ring->dequeue) {
+ xhci->error_bitmask |= 1 << 1;
+ return;
+ }
+
+ event = xhci->event_ring->dequeue;
+ /* Does the HC or OS own the TRB? */
+ if ((event->event_cmd.flags & TRB_CYCLE) !=
+ xhci->event_ring->cycle_state) {
+ xhci->error_bitmask |= 1 << 2;
+ return;
+ }
+ xhci_dbg(xhci, "%s - OS owns TRB\n", __func__);
+
+ /* FIXME: Handle more event types. */
+ switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
+ case TRB_TYPE(TRB_COMPLETION):
+ xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__);
+ handle_cmd_completion(xhci, &event->event_cmd);
+ xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__);
+ break;
+ case TRB_TYPE(TRB_PORT_STATUS):
+ xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__);
+ handle_port_status(xhci, event);
+ xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__);
+ update_ptrs = 0;
+ break;
+ case TRB_TYPE(TRB_TRANSFER):
+ xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__);
+ ret = handle_tx_event(xhci, &event->trans_event);
+ xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__);
+ if (ret < 0)
+ xhci->error_bitmask |= 1 << 9;
+ else
+ update_ptrs = 0;
+ break;
+ default:
+ if ((event->event_cmd.flags & TRB_TYPE_BITMASK) >= TRB_TYPE(48))
+ handle_vendor_event(xhci, event);
+ else
+ xhci->error_bitmask |= 1 << 3;
+ }
+ /* Any of the above functions may drop and re-acquire the lock, so check
+ * to make sure a watchdog timer didn't mark the host as non-responsive.
+ */
+ if (xhci->xhc_state & XHCI_STATE_DYING) {
+ xhci_dbg(xhci, "xHCI host dying, returning from "
+ "event handler.\n");
+ return;
+ }
+
+ if (update_ptrs)
+ /* Update SW event ring dequeue pointer */
+ inc_deq(xhci, xhci->event_ring, true);
+
/* Are there more items on the event ring? */
xhci_handle_event(xhci);
}
+/*
+ * xHCI spec says we can get an interrupt, and if the HC has an error condition,
+ * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
+ * indicators of an event TRB error, but we check the status *first* to be safe.
+ */
+irqreturn_t xhci_irq(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ u32 status;
+ union xhci_trb *trb;
+ u64 temp_64;
+ union xhci_trb *event_ring_deq;
+ dma_addr_t deq;
+
+ spin_lock(&xhci->lock);
+ trb = xhci->event_ring->dequeue;
+ /* Check if the xHC generated the interrupt, or the irq is shared */
+ status = xhci_readl(xhci, &xhci->op_regs->status);
+ if (status == 0xffffffff)
+ goto hw_died;
+
+ if (!(status & STS_EINT)) {
+ spin_unlock(&xhci->lock);
+ xhci_warn(xhci, "Spurious interrupt.\n");
+ return IRQ_NONE;
+ }
+ xhci_dbg(xhci, "op reg status = %08x\n", status);
+ xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+ xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+ (unsigned long long)
+ xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+ lower_32_bits(trb->link.segment_ptr),
+ upper_32_bits(trb->link.segment_ptr),
+ (unsigned int) trb->link.intr_target,
+ (unsigned int) trb->link.control);
+
+ if (status & STS_FATAL) {
+ xhci_warn(xhci, "WARNING: Host System Error\n");
+ xhci_halt(xhci);
+hw_died:
+ xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+ spin_unlock(&xhci->lock);
+ return -ESHUTDOWN;
+ }
+
+ /*
+ * Clear the op reg interrupt status first,
+ * so we can receive interrupts from other MSI-X interrupters.
+ * Write 1 to clear the interrupt status.
+ */
+ status |= STS_EINT;
+ xhci_writel(xhci, status, &xhci->op_regs->status);
+ /* FIXME when MSI-X is supported and there are multiple vectors */
+ /* Clear the MSI-X event interrupt status */
+
+ if (hcd->irq != -1) {
+ u32 irq_pending;
+ /* Acknowledge the PCI interrupt */
+ irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ irq_pending |= 0x3;
+ xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
+ }
+
+ if (xhci->xhc_state & XHCI_STATE_DYING) {
+ xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
+ "Shouldn't IRQs be disabled?\n");
+ /* Clear the event handler busy flag (RW1C);
+ * the event ring should be empty.
+ */
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB,
+ &xhci->ir_set->erst_dequeue);
+ spin_unlock(&xhci->lock);
+
+ return IRQ_HANDLED;
+ }
+
+ event_ring_deq = xhci->event_ring->dequeue;
+ /* FIXME this should be a delayed service routine
+ * that clears the EHB.
+ */
+ xhci_handle_event(xhci);
+
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ /* If necessary, update the HW's version of the event ring deq ptr. */
+ if (event_ring_deq != xhci->event_ring->dequeue) {
+ deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
+ xhci->event_ring->dequeue);
+ if (deq == 0)
+ xhci_warn(xhci, "WARN something wrong with SW event "
+ "ring dequeue ptr.\n");
+ /* Update HC event ring dequeue pointer */
+ temp_64 &= ERST_PTR_MASK;
+ temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK);
+ }
+
+ /* Clear the event handler busy flag (RW1C); event ring is empty. */
+ temp_64 |= ERST_EHB;
+ xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
+
+ spin_unlock(&xhci->lock);
+
+ return IRQ_HANDLED;
+}
+
+irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
+{
+ irqreturn_t ret;
+
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+ ret = xhci_irq(hcd);
+
+ return ret;
+}
+
/**** Endpoint Ring Operations ****/
/*
unsigned int stream_id,
unsigned int num_trbs,
struct urb *urb,
- struct xhci_td **td,
+ unsigned int td_index,
gfp_t mem_flags)
{
int ret;
+ struct urb_priv *urb_priv;
+ struct xhci_td *td;
struct xhci_ring *ep_ring;
struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
num_trbs, mem_flags);
if (ret)
return ret;
- *td = kzalloc(sizeof(struct xhci_td), mem_flags);
- if (!*td)
- return -ENOMEM;
- INIT_LIST_HEAD(&(*td)->td_list);
- INIT_LIST_HEAD(&(*td)->cancelled_td_list);
- ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb);
- if (unlikely(ret)) {
- kfree(*td);
- return ret;
+ urb_priv = urb->hcpriv;
+ td = urb_priv->td[td_index];
+
+ INIT_LIST_HEAD(&td->td_list);
+ INIT_LIST_HEAD(&td->cancelled_td_list);
+
+ if (td_index == 0) {
+ ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb);
+ if (unlikely(ret)) {
+ xhci_urb_free_priv(xhci, urb_priv);
+ urb->hcpriv = NULL;
+ return ret;
+ }
}
- (*td)->urb = urb;
- urb->hcpriv = (void *) (*td);
+ td->urb = urb;
/* Add this TD to the tail of the endpoint ring's TD list */
- list_add_tail(&(*td)->td_list, &ep_ring->td_list);
- (*td)->start_seg = ep_ring->enq_seg;
- (*td)->first_trb = ep_ring->enqueue;
+ list_add_tail(&td->td_list, &ep_ring->td_list);
+ td->start_seg = ep_ring->enq_seg;
+ td->first_trb = ep_ring->enqueue;
+
+ urb_priv->td[td_index] = td;
return 0;
}
{
struct xhci_ring *ep_ring;
unsigned int num_trbs;
+ struct urb_priv *urb_priv;
struct xhci_td *td;
struct scatterlist *sg;
int num_sgs;
trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
- num_trbs, urb, &td, mem_flags);
+ num_trbs, urb, 0, mem_flags);
if (trb_buff_len < 0)
return trb_buff_len;
+
+ urb_priv = urb->hcpriv;
+ td = urb_priv->td[0];
+
/*
* Don't give the first TRB to the hardware (by toggling the cycle bit)
* until we've finished creating all the other TRBs. The ring's cycle
struct urb *urb, int slot_id, unsigned int ep_index)
{
struct xhci_ring *ep_ring;
+ struct urb_priv *urb_priv;
struct xhci_td *td;
int num_trbs;
struct xhci_generic_trb *start_trb;
ret = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
- num_trbs, urb, &td, mem_flags);
+ num_trbs, urb, 0, mem_flags);
if (ret < 0)
return ret;
+ urb_priv = urb->hcpriv;
+ td = urb_priv->td[0];
+
/*
* Don't give the first TRB to the hardware (by toggling the cycle bit)
* until we've finished creating all the other TRBs. The ring's cycle
struct xhci_generic_trb *start_trb;
int start_cycle;
u32 field, length_field;
+ struct urb_priv *urb_priv;
struct xhci_td *td;
ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
num_trbs++;
ret = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
- num_trbs, urb, &td, mem_flags);
+ num_trbs, urb, 0, mem_flags);
if (ret < 0)
return ret;
+ urb_priv = urb->hcpriv;
+ td = urb_priv->td[0];
+
/*
* Don't give the first TRB to the hardware (by toggling the cycle bit)
* until we've finished creating all the other TRBs. The ring's cycle
return 0;
}
+static int count_isoc_trbs_needed(struct xhci_hcd *xhci,
+ struct urb *urb, int i)
+{
+ int num_trbs = 0;
+ u64 addr, td_len, running_total;
+
+ addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
+ td_len = urb->iso_frame_desc[i].length;
+
+ running_total = TRB_MAX_BUFF_SIZE -
+ (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ if (running_total != 0)
+ num_trbs++;
+
+ while (running_total < td_len) {
+ num_trbs++;
+ running_total += TRB_MAX_BUFF_SIZE;
+ }
+
+ return num_trbs;
+}
+
+/* This is for isoc transfer */
+static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_ring *ep_ring;
+ struct urb_priv *urb_priv;
+ struct xhci_td *td;
+ int num_tds, trbs_per_td;
+ struct xhci_generic_trb *start_trb;
+ bool first_trb;
+ int start_cycle;
+ u32 field, length_field;
+ int running_total, trb_buff_len, td_len, td_remain_len, ret;
+ u64 start_addr, addr;
+ int i, j;
+
+ ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+
+ num_tds = urb->number_of_packets;
+ if (num_tds < 1) {
+ xhci_dbg(xhci, "Isoc URB with zero packets?\n");
+ return -EINVAL;
+ }
+
+ if (!in_interrupt())
+ dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d),"
+ " addr = %#llx, num_tds = %d\n",
+ urb->ep->desc.bEndpointAddress,
+ urb->transfer_buffer_length,
+ urb->transfer_buffer_length,
+ (unsigned long long)urb->transfer_dma,
+ num_tds);
+
+ start_addr = (u64) urb->transfer_dma;
+ start_trb = &ep_ring->enqueue->generic;
+ start_cycle = ep_ring->cycle_state;
+
+ /* Queue the first TRB, even if it's zero-length */
+ for (i = 0; i < num_tds; i++) {
+ first_trb = true;
+
+ running_total = 0;
+ addr = start_addr + urb->iso_frame_desc[i].offset;
+ td_len = urb->iso_frame_desc[i].length;
+ td_remain_len = td_len;
+
+ trbs_per_td = count_isoc_trbs_needed(xhci, urb, i);
+
+ ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
+ urb->stream_id, trbs_per_td, urb, i, mem_flags);
+ if (ret < 0)
+ return ret;
+
+ urb_priv = urb->hcpriv;
+ td = urb_priv->td[i];
+
+ for (j = 0; j < trbs_per_td; j++) {
+ u32 remainder = 0;
+ field = 0;
+
+ if (first_trb) {
+ /* Queue the isoc TRB */
+ field |= TRB_TYPE(TRB_ISOC);
+ /* Assume URB_ISO_ASAP is set */
+ field |= TRB_SIA;
+ if (i > 0)
+ field |= ep_ring->cycle_state;
+ first_trb = false;
+ } else {
+ /* Queue other normal TRBs */
+ field |= TRB_TYPE(TRB_NORMAL);
+ field |= ep_ring->cycle_state;
+ }
+
+ /* Chain all the TRBs together; clear the chain bit in
+ * the last TRB to indicate it's the last TRB in the
+ * chain.
+ */
+ if (j < trbs_per_td - 1) {
+ field |= TRB_CHAIN;
+ } else {
+ td->last_trb = ep_ring->enqueue;
+ field |= TRB_IOC;
+ }
+
+ /* Calculate TRB length */
+ trb_buff_len = TRB_MAX_BUFF_SIZE -
+ (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ if (trb_buff_len > td_remain_len)
+ trb_buff_len = td_remain_len;
+
+ remainder = xhci_td_remainder(td_len - running_total);
+ length_field = TRB_LEN(trb_buff_len) |
+ remainder |
+ TRB_INTR_TARGET(0);
+ queue_trb(xhci, ep_ring, false, false,
+ lower_32_bits(addr),
+ upper_32_bits(addr),
+ length_field,
+ /* We always want to know if the TRB was short,
+ * or we won't get an event when it completes.
+ * (Unless we use event data TRBs, which are a
+ * waste of space and HC resources.)
+ */
+ field | TRB_ISP);
+ running_total += trb_buff_len;
+
+ addr += trb_buff_len;
+ td_remain_len -= trb_buff_len;
+ }
+
+ /* Check TD length */
+ if (running_total != td_len) {
+ xhci_err(xhci, "ISOC TD length unmatch\n");
+ return -EINVAL;
+ }
+ }
+
+ wmb();
+ start_trb->field[3] |= start_cycle;
+
+ ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id);
+ return 0;
+}
+
+/*
+ * Check transfer ring to guarantee there is enough room for the urb.
+ * Update ISO URB start_frame and interval.
+ * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to
+ * update the urb->start_frame by now.
+ * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input.
+ */
+int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_virt_device *xdev;
+ struct xhci_ring *ep_ring;
+ struct xhci_ep_ctx *ep_ctx;
+ int start_frame;
+ int xhci_interval;
+ int ep_interval;
+ int num_tds, num_trbs, i;
+ int ret;
+
+ xdev = xhci->devs[slot_id];
+ ep_ring = xdev->eps[ep_index].ring;
+ ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+
+ num_trbs = 0;
+ num_tds = urb->number_of_packets;
+ for (i = 0; i < num_tds; i++)
+ num_trbs += count_isoc_trbs_needed(xhci, urb, i);
+
+ /* Check the ring to guarantee there is enough room for the whole urb.
+ * Do not insert any td of the urb to the ring if the check failed.
+ */
+ ret = prepare_ring(xhci, ep_ring, ep_ctx->ep_info & EP_STATE_MASK,
+ num_trbs, mem_flags);
+ if (ret)
+ return ret;
+
+ start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index);
+ start_frame &= 0x3fff;
+
+ urb->start_frame = start_frame;
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ urb->start_frame >>= 3;
+
+ xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info);
+ ep_interval = urb->interval;
+ /* Convert to microframes */
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ ep_interval *= 8;
+ /* FIXME change this to a warning and a suggestion to use the new API
+ * to set the polling interval (once the API is added).
+ */
+ if (xhci_interval != ep_interval) {
+ if (!printk_ratelimit())
+ dev_dbg(&urb->dev->dev, "Driver uses different interval"
+ " (%d microframe%s) than xHCI "
+ "(%d microframe%s)\n",
+ ep_interval,
+ ep_interval == 1 ? "" : "s",
+ xhci_interval,
+ xhci_interval == 1 ? "" : "s");
+ urb->interval = xhci_interval;
+ /* Convert back to frames for LS/FS devices */
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ urb->interval /= 8;
+ }
+ return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+}
+
/**** Command Ring Operations ****/
/* Generic function for queueing a command TRB on the command ring.
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/log2.h>
#include <linux/module.h>
return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
}
+/*
+ * Free IRQs
+ * free all IRQs request
+ */
+static void xhci_free_irq(struct xhci_hcd *xhci)
+{
+ int i;
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
-#if 0
-/* Set up MSI-X table for entry 0 (may claim other entries later) */
-static int xhci_setup_msix(struct xhci_hcd *xhci)
+ /* return if using legacy interrupt */
+ if (xhci_to_hcd(xhci)->irq >= 0)
+ return;
+
+ if (xhci->msix_entries) {
+ for (i = 0; i < xhci->msix_count; i++)
+ if (xhci->msix_entries[i].vector)
+ free_irq(xhci->msix_entries[i].vector,
+ xhci_to_hcd(xhci));
+ } else if (pdev->irq >= 0)
+ free_irq(pdev->irq, xhci_to_hcd(xhci));
+
+ return;
+}
+
+/*
+ * Set up MSI
+ */
+static int xhci_setup_msi(struct xhci_hcd *xhci)
{
int ret;
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+ ret = pci_enable_msi(pdev);
+ if (ret) {
+ xhci_err(xhci, "failed to allocate MSI entry\n");
+ return ret;
+ }
+
+ ret = request_irq(pdev->irq, (irq_handler_t)xhci_msi_irq,
+ 0, "xhci_hcd", xhci_to_hcd(xhci));
+ if (ret) {
+ xhci_err(xhci, "disable MSI interrupt\n");
+ pci_disable_msi(pdev);
+ }
+
+ return ret;
+}
+
+/*
+ * Set up MSI-X
+ */
+static int xhci_setup_msix(struct xhci_hcd *xhci)
+{
+ int i, ret = 0;
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
- xhci->msix_count = 0;
- /* XXX: did I do this right? ixgbe does kcalloc for more than one */
- xhci->msix_entries = kmalloc(sizeof(struct msix_entry), GFP_KERNEL);
+ /*
+ * calculate number of msi-x vectors supported.
+ * - HCS_MAX_INTRS: the max number of interrupts the host can handle,
+ * with max number of interrupters based on the xhci HCSPARAMS1.
+ * - num_online_cpus: maximum msi-x vectors per CPUs core.
+ * Add additional 1 vector to ensure always available interrupt.
+ */
+ xhci->msix_count = min(num_online_cpus() + 1,
+ HCS_MAX_INTRS(xhci->hcs_params1));
+
+ xhci->msix_entries =
+ kmalloc((sizeof(struct msix_entry))*xhci->msix_count,
+ GFP_KERNEL);
if (!xhci->msix_entries) {
xhci_err(xhci, "Failed to allocate MSI-X entries\n");
return -ENOMEM;
}
- xhci->msix_entries[0].entry = 0;
+
+ for (i = 0; i < xhci->msix_count; i++) {
+ xhci->msix_entries[i].entry = i;
+ xhci->msix_entries[i].vector = 0;
+ }
ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
if (ret) {
goto free_entries;
}
- /*
- * Pass the xhci pointer value as the request_irq "cookie".
- * If more irqs are added, this will need to be unique for each one.
- */
- ret = request_irq(xhci->msix_entries[0].vector, &xhci_irq, 0,
- "xHCI", xhci_to_hcd(xhci));
- if (ret) {
- xhci_err(xhci, "Failed to allocate MSI-X interrupt\n");
- goto disable_msix;
+ for (i = 0; i < xhci->msix_count; i++) {
+ ret = request_irq(xhci->msix_entries[i].vector,
+ (irq_handler_t)xhci_msi_irq,
+ 0, "xhci_hcd", xhci_to_hcd(xhci));
+ if (ret)
+ goto disable_msix;
}
- xhci_dbg(xhci, "Finished setting up MSI-X\n");
- return 0;
+
+ return ret;
disable_msix:
+ xhci_err(xhci, "disable MSI-X interrupt\n");
+ xhci_free_irq(xhci);
pci_disable_msix(pdev);
free_entries:
kfree(xhci->msix_entries);
return ret;
}
-/* XXX: code duplication; can xhci_setup_msix call this? */
/* Free any IRQs and disable MSI-X */
static void xhci_cleanup_msix(struct xhci_hcd *xhci)
{
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
- if (!xhci->msix_entries)
- return;
- free_irq(xhci->msix_entries[0].vector, xhci);
- pci_disable_msix(pdev);
- kfree(xhci->msix_entries);
- xhci->msix_entries = NULL;
- xhci_dbg(xhci, "Finished cleaning up MSI-X\n");
+ xhci_free_irq(xhci);
+
+ if (xhci->msix_entries) {
+ pci_disable_msix(pdev);
+ kfree(xhci->msix_entries);
+ xhci->msix_entries = NULL;
+ } else {
+ pci_disable_msi(pdev);
+ }
+
+ return;
}
-#endif
/*
* Initialize memory for HCD and xHC (one-time init).
return retval;
}
-/*
- * Called in interrupt context when there might be work
- * queued on the event ring
- *
- * xhci->lock must be held by caller.
- */
-static void xhci_work(struct xhci_hcd *xhci)
-{
- u32 temp;
- u64 temp_64;
-
- /*
- * Clear the op reg interrupt status first,
- * so we can receive interrupts from other MSI-X interrupters.
- * Write 1 to clear the interrupt status.
- */
- temp = xhci_readl(xhci, &xhci->op_regs->status);
- temp |= STS_EINT;
- xhci_writel(xhci, temp, &xhci->op_regs->status);
- /* FIXME when MSI-X is supported and there are multiple vectors */
- /* Clear the MSI-X event interrupt status */
-
- /* Acknowledge the interrupt */
- temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- temp |= 0x3;
- xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
- /* Flush posted writes */
- xhci_readl(xhci, &xhci->ir_set->irq_pending);
-
- if (xhci->xhc_state & XHCI_STATE_DYING)
- xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
- "Shouldn't IRQs be disabled?\n");
- else
- /* FIXME this should be a delayed service routine
- * that clears the EHB.
- */
- xhci_handle_event(xhci);
-
- /* Clear the event handler busy flag (RW1C); the event ring should be empty. */
- temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
- xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
- /* Flush posted writes -- FIXME is this necessary? */
- xhci_readl(xhci, &xhci->ir_set->irq_pending);
-}
-
/*-------------------------------------------------------------------------*/
-/*
- * xHCI spec says we can get an interrupt, and if the HC has an error condition,
- * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
- * indicators of an event TRB error, but we check the status *first* to be safe.
- */
-irqreturn_t xhci_irq(struct usb_hcd *hcd)
-{
- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- u32 temp, temp2;
- union xhci_trb *trb;
-
- spin_lock(&xhci->lock);
- trb = xhci->event_ring->dequeue;
- /* Check if the xHC generated the interrupt, or the irq is shared */
- temp = xhci_readl(xhci, &xhci->op_regs->status);
- temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- if (temp == 0xffffffff && temp2 == 0xffffffff)
- goto hw_died;
-
- if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
- spin_unlock(&xhci->lock);
- return IRQ_NONE;
- }
- xhci_dbg(xhci, "op reg status = %08x\n", temp);
- xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
- xhci_dbg(xhci, "Event ring dequeue ptr:\n");
- xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
- (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
- lower_32_bits(trb->link.segment_ptr),
- upper_32_bits(trb->link.segment_ptr),
- (unsigned int) trb->link.intr_target,
- (unsigned int) trb->link.control);
-
- if (temp & STS_FATAL) {
- xhci_warn(xhci, "WARNING: Host System Error\n");
- xhci_halt(xhci);
-hw_died:
- xhci_to_hcd(xhci)->state = HC_STATE_HALT;
- spin_unlock(&xhci->lock);
- return -ESHUTDOWN;
- }
-
- xhci_work(xhci);
- spin_unlock(&xhci->lock);
-
- return IRQ_HANDLED;
-}
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
void xhci_event_ring_work(unsigned long arg)
{
u32 temp;
u64 temp_64;
+ u32 ret;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
void (*doorbell)(struct xhci_hcd *) = NULL;
hcd->uses_new_polling = 1;
- hcd->poll_rh = 0;
xhci_dbg(xhci, "xhci_run\n");
-#if 0 /* FIXME: MSI not setup yet */
- /* Do this at the very last minute */
+ /* unregister the legacy interrupt */
+ if (hcd->irq)
+ free_irq(hcd->irq, hcd);
+ hcd->irq = -1;
+
ret = xhci_setup_msix(xhci);
- if (!ret)
- return ret;
+ if (ret)
+ /* fall back to msi*/
+ ret = xhci_setup_msi(xhci);
+
+ if (ret) {
+ /* fall back to legacy interrupt*/
+ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+ hcd->irq_descr, hcd);
+ if (ret) {
+ xhci_err(xhci, "request interrupt %d failed\n",
+ pdev->irq);
+ return ret;
+ }
+ hcd->irq = pdev->irq;
+ }
- return -ENOSYS;
-#endif
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
init_timer(&xhci->event_ring_timer);
xhci->event_ring_timer.data = (unsigned long) xhci;
return -ENODEV;
}
- xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
if (doorbell)
(*doorbell)(xhci);
if (xhci->quirks & XHCI_NEC_HOST)
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
xhci_reset(xhci);
+ xhci_cleanup_msix(xhci);
spin_unlock_irq(&xhci->lock);
-#if 0 /* No MSI yet */
- xhci_cleanup_msix(xhci);
-#endif
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
/* Tell the event ring poll function not to reschedule */
xhci->zombie = 1;
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
- spin_unlock_irq(&xhci->lock);
-
-#if 0
xhci_cleanup_msix(xhci);
-#endif
+ spin_unlock_irq(&xhci->lock);
xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
xhci_readl(xhci, &xhci->op_regs->status));
unsigned long flags;
int ret = 0;
unsigned int slot_id, ep_index;
-
+ struct urb_priv *urb_priv;
+ int size, i;
if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0)
return -EINVAL;
ret = -EINVAL;
goto exit;
}
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
if (!in_interrupt())
xhci_dbg(xhci, "urb submitted during PCI suspend\n");
ret = -ESHUTDOWN;
goto exit;
}
+
+ if (usb_endpoint_xfer_isoc(&urb->ep->desc))
+ size = urb->number_of_packets;
+ else
+ size = 1;
+
+ urb_priv = kzalloc(sizeof(struct urb_priv) +
+ size * sizeof(struct xhci_td *), mem_flags);
+ if (!urb_priv)
+ return -ENOMEM;
+
+ for (i = 0; i < size; i++) {
+ urb_priv->td[i] = kzalloc(sizeof(struct xhci_td), mem_flags);
+ if (!urb_priv->td[i]) {
+ urb_priv->length = i;
+ xhci_urb_free_priv(xhci, urb_priv);
+ return -ENOMEM;
+ }
+ }
+
+ urb_priv->length = size;
+ urb_priv->td_cnt = 0;
+ urb->hcpriv = urb_priv;
+
if (usb_endpoint_xfer_control(&urb->ep->desc)) {
/* Check to see if the max packet size for the default control
* endpoint changed during FS device enumeration
slot_id, ep_index);
spin_unlock_irqrestore(&xhci->lock, flags);
} else {
- ret = -EINVAL;
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ goto dying;
+ ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb,
+ slot_id, ep_index);
+ spin_unlock_irqrestore(&xhci->lock, flags);
}
exit:
return ret;
dying:
+ xhci_urb_free_priv(xhci, urb_priv);
+ urb->hcpriv = NULL;
xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for "
"non-responsive xHCI host.\n",
urb->ep->desc.bEndpointAddress, urb);
return -ESHUTDOWN;
}
+/* Get the right ring for the given URB.
+ * If the endpoint supports streams, boundary check the URB's stream ID.
+ * If the endpoint doesn't support streams, return the singular endpoint ring.
+ */
+static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
+ struct urb *urb)
+{
+ unsigned int slot_id;
+ unsigned int ep_index;
+ unsigned int stream_id;
+ struct xhci_virt_ep *ep;
+
+ slot_id = urb->dev->slot_id;
+ ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+ stream_id = urb->stream_id;
+ ep = &xhci->devs[slot_id]->eps[ep_index];
+ /* Common case: no streams */
+ if (!(ep->ep_state & EP_HAS_STREAMS))
+ return ep->ring;
+
+ if (stream_id == 0) {
+ xhci_warn(xhci,
+ "WARN: Slot ID %u, ep index %u has streams, "
+ "but URB has no stream ID.\n",
+ slot_id, ep_index);
+ return NULL;
+ }
+
+ if (stream_id < ep->stream_info->num_streams)
+ return ep->stream_info->stream_rings[stream_id];
+
+ xhci_warn(xhci,
+ "WARN: Slot ID %u, ep index %u has "
+ "stream IDs 1 to %u allocated, "
+ "but stream ID %u is requested.\n",
+ slot_id, ep_index,
+ ep->stream_info->num_streams - 1,
+ stream_id);
+ return NULL;
+}
+
/*
* Remove the URB's TD from the endpoint ring. This may cause the HC to stop
* USB transfers, potentially stopping in the middle of a TRB buffer. The HC
int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
unsigned long flags;
- int ret;
+ int ret, i;
u32 temp;
struct xhci_hcd *xhci;
+ struct urb_priv *urb_priv;
struct xhci_td *td;
unsigned int ep_index;
struct xhci_ring *ep_ring;
temp = xhci_readl(xhci, &xhci->op_regs->status);
if (temp == 0xffffffff) {
xhci_dbg(xhci, "HW died, freeing TD.\n");
- td = (struct xhci_td *) urb->hcpriv;
+ urb_priv = urb->hcpriv;
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock_irqrestore(&xhci->lock, flags);
usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN);
- kfree(td);
+ xhci_urb_free_priv(xhci, urb_priv);
return ret;
}
if (xhci->xhc_state & XHCI_STATE_DYING) {
xhci_dbg(xhci, "Endpoint ring:\n");
xhci_debug_ring(xhci, ep_ring);
- td = (struct xhci_td *) urb->hcpriv;
- list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
+ urb_priv = urb->hcpriv;
+
+ for (i = urb_priv->td_cnt; i < urb_priv->length; i++) {
+ td = urb_priv->td[i];
+ list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
+ }
+
/* Queue a stop endpoint command, but only if this is
* the first cancellation to be handled.
*/
struct timer_list stop_cmd_timer;
int stop_cmds_pending;
struct xhci_hcd *xhci;
+ /*
+ * Sometimes the xHC can not process isochronous endpoint ring quickly
+ * enough, and it will miss some isoc tds on the ring and generate
+ * a Missed Service Error Event.
+ * Set skip flag when receive a Missed Service Error Event and
+ * process the missed tds on the endpoint ring.
+ */
+ bool skip;
};
struct xhci_virt_device {
/* Control transfer TRB specific fields */
#define TRB_DIR_IN (1<<16)
+/* Isochronous TRB specific fields */
+#define TRB_SIA (1<<31)
+
struct xhci_generic_trb {
u32 field[4];
};
dma_addr_t *sp_dma_buffers;
};
+struct urb_priv {
+ int length;
+ int td_cnt;
+ struct xhci_td *td[0];
+};
+
/*
* Each segment table entry is 4*32bits long. 1K seems like an ok size:
* (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
int page_size;
/* Valid values are 12 to 20, inclusive */
int page_shift;
- /* only one MSI vector for now, but might need more later */
+ /* msi-x vectors */
int msix_count;
struct msix_entry *msix_entries;
/* data structures */
struct xhci_ring *xhci_dma_to_transfer_ring(
struct xhci_virt_ep *ep,
u64 address);
-struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
- struct urb *urb);
-struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
- unsigned int slot_id, unsigned int ep_index,
- unsigned int stream_id);
struct xhci_ring *xhci_stream_id_to_ring(
struct xhci_virt_device *dev,
unsigned int ep_index,
struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
bool allocate_in_ctx, bool allocate_completion,
gfp_t mem_flags);
+void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command);
void xhci_shutdown(struct usb_hcd *hcd);
int xhci_get_frame(struct usb_hcd *hcd);
irqreturn_t xhci_irq(struct usb_hcd *hcd);
+irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd);
int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
void xhci_ring_cmd_db(struct xhci_hcd *xhci);
void *xhci_setup_one_noop(struct xhci_hcd *xhci);
-void xhci_handle_event(struct xhci_hcd *xhci);
-void xhci_set_hc_event_deq(struct xhci_hcd *xhci);
int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id);
int slot_id, unsigned int ep_index);
int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
int slot_id, unsigned int ep_index);
+int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index);
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id, bool command_must_succeed);
int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
static int ftdi_elan_release(struct inode *inode, struct file *file)
{
- struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data;
+ struct usb_ftdi *ftdi = file->private_data;
if (ftdi == NULL)
return -ENODEV;
up(&ftdi->sw_lock); /* decrement the count on our device */
int bytes_read = 0;
int retry_on_empty = 10;
int retry_on_timeout = 5;
- struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data;
+ struct usb_ftdi *ftdi = file->private_data;
if (ftdi->disconnected > 0) {
return -ENODEV;
}
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
#include <linux/poll.h>
#include <linux/usb/iowarrior.h>
MODULE_LICENSE("GPL");
/* Module parameters */
+static DEFINE_MUTEX(iowarrior_mutex);
static int debug = 0;
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "debug=1 enables debugging messages");
int read_idx;
int offset;
- dev = (struct iowarrior *)file->private_data;
+ dev = file->private_data;
/* verify that the device wasn't unplugged */
if (dev == NULL || !dev->present)
char *buf = NULL; /* for IOW24 and IOW56 we need a buffer */
struct urb *int_out_urb = NULL;
- dev = (struct iowarrior *)file->private_data;
+ dev = file->private_data;
mutex_lock(&dev->mutex);
/* verify that the device wasn't unplugged */
int retval;
int io_res; /* checks for bytes read/written and copy_to/from_user results */
- dev = (struct iowarrior *)file->private_data;
+ dev = file->private_data;
if (dev == NULL) {
return -ENODEV;
}
return -ENOMEM;
/* lock this object */
- lock_kernel();
+ mutex_lock(&iowarrior_mutex);
mutex_lock(&dev->mutex);
/* verify that the device wasn't unplugged */
error_out:
/* unlock the device */
mutex_unlock(&dev->mutex);
- unlock_kernel();
+ mutex_unlock(&iowarrior_mutex);
kfree(buffer);
return retval;
}
dbg("%s", __func__);
- lock_kernel();
+ mutex_lock(&iowarrior_mutex);
subminor = iminor(inode);
interface = usb_find_interface(&iowarrior_driver, subminor);
if (!interface) {
- unlock_kernel();
+ mutex_unlock(&iowarrior_mutex);
err("%s - error, can't find device for minor %d", __func__,
subminor);
return -ENODEV;
dev = usb_get_intfdata(interface);
if (!dev) {
mutex_unlock(&iowarrior_open_disc_lock);
- unlock_kernel();
+ mutex_unlock(&iowarrior_mutex);
return -ENODEV;
}
out:
mutex_unlock(&dev->mutex);
- unlock_kernel();
+ mutex_unlock(&iowarrior_mutex);
return retval;
}
struct iowarrior *dev;
int retval = 0;
- dev = (struct iowarrior *)file->private_data;
+ dev = file->private_data;
if (dev == NULL) {
return -ENODEV;
}
dbg(2, "%s: enter", __func__);
- dev = (struct lego_usb_tower *)file->private_data;
+ dev = file->private_data;
if (dev == NULL) {
dbg(1, "%s: object is NULL", __func__);
dbg(2, "%s: enter, count = %Zd", __func__, count);
- dev = (struct lego_usb_tower *)file->private_data;
+ dev = file->private_data;
/* lock this object */
if (mutex_lock_interruptible(&dev->lock)) {
dbg(2, "%s: enter, count = %Zd", __func__, count);
- dev = (struct lego_usb_tower *)file->private_data;
+ dev = file->private_data;
/* lock this object */
if (mutex_lock_interruptible(&dev->lock)) {
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/random.h>
#include <linux/poll.h>
struct mutex lock; /* general race avoidance */
};
+static DEFINE_MUTEX(rio500_mutex);
static struct rio_usb_data rio_instance;
static int open_rio(struct inode *inode, struct file *file)
struct rio_usb_data *rio = &rio_instance;
/* against disconnect() */
- lock_kernel();
+ mutex_lock(&rio500_mutex);
mutex_lock(&(rio->lock));
if (rio->isopen || !rio->present) {
mutex_unlock(&(rio->lock));
- unlock_kernel();
+ mutex_unlock(&rio500_mutex);
return -EBUSY;
}
rio->isopen = 1;
mutex_unlock(&(rio->lock));
dev_info(&rio->rio_dev->dev, "Rio opened.\n");
- unlock_kernel();
+ mutex_unlock(&rio500_mutex);
return 0;
}
struct rio_usb_data *rio = usb_get_intfdata (intf);
usb_set_intfdata (intf, NULL);
- lock_kernel();
+ mutex_lock(&rio500_mutex);
if (rio) {
usb_deregister_dev(intf, &usb_rio_class);
/* better let it finish - the release will do whats needed */
rio->rio_dev = NULL;
mutex_unlock(&(rio->lock));
- unlock_kernel();
+ mutex_unlock(&rio500_mutex);
return;
}
kfree(rio->ibuf);
rio->present = 0;
mutex_unlock(&(rio->lock));
}
- unlock_kernel();
+ mutex_unlock(&rio500_mutex);
}
static const struct usb_device_id rio_table[] = {
{
struct sisusb_usb_data *sisusb;
- if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+ if (!(sisusb = file->private_data))
return -ENODEV;
mutex_lock(&sisusb->lock);
u16 buf16;
u32 buf32, address;
- if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+ if (!(sisusb = file->private_data))
return -ENODEV;
mutex_lock(&sisusb->lock);
u16 buf16;
u32 buf32, address;
- if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+ if (!(sisusb = file->private_data))
return -ENODEV;
mutex_lock(&sisusb->lock);
struct sisusb_usb_data *sisusb;
loff_t ret;
- if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+ if (!(sisusb = file->private_data))
return -ENODEV;
mutex_lock(&sisusb->lock);
long retval = 0;
u32 __user *argp = (u32 __user *)arg;
- if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+ if (!(sisusb = file->private_data))
return -ENODEV;
mutex_lock(&sisusb->lock);
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
#define IOCTL_GET_DRV_VERSION 2
+static DEFINE_MUTEX(lcd_mutex);
static const struct usb_device_id id_table[] = {
{ .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, },
{ },
struct usb_interface *interface;
int subminor, r;
- lock_kernel();
+ mutex_lock(&lcd_mutex);
subminor = iminor(inode);
interface = usb_find_interface(&lcd_driver, subminor);
if (!interface) {
- unlock_kernel();
+ mutex_unlock(&lcd_mutex);
err ("USBLCD: %s - error, can't find device for minor %d",
__func__, subminor);
return -ENODEV;
dev = usb_get_intfdata(interface);
if (!dev) {
mutex_unlock(&open_disc_mutex);
- unlock_kernel();
+ mutex_unlock(&lcd_mutex);
return -ENODEV;
}
r = usb_autopm_get_interface(interface);
if (r < 0) {
kref_put(&dev->kref, lcd_delete);
- unlock_kernel();
+ mutex_unlock(&lcd_mutex);
return r;
}
/* save our object in the file's private structure */
file->private_data = dev;
- unlock_kernel();
+ mutex_unlock(&lcd_mutex);
return 0;
}
{
struct usb_lcd *dev;
- dev = (struct usb_lcd *)file->private_data;
+ dev = file->private_data;
if (dev == NULL)
return -ENODEV;
int retval = 0;
int bytes_read;
- dev = (struct usb_lcd *)file->private_data;
+ dev = file->private_data;
/* do a blocking bulk read to get data from the device */
retval = usb_bulk_msg(dev->udev,
u16 bcdDevice;
char buf[30];
- dev = (struct usb_lcd *)file->private_data;
+ dev = file->private_data;
if (dev == NULL)
return -ENODEV;
switch (cmd) {
case IOCTL_GET_HARD_VERSION:
- lock_kernel();
+ mutex_lock(&lcd_mutex);
bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice);
sprintf(buf,"%1d%1d.%1d%1d",
(bcdDevice & 0xF000)>>12,
(bcdDevice & 0xF00)>>8,
(bcdDevice & 0xF0)>>4,
(bcdDevice & 0xF));
- unlock_kernel();
+ mutex_unlock(&lcd_mutex);
if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0)
return -EFAULT;
break;
struct urb *urb = NULL;
char *buf = NULL;
- dev = (struct usb_lcd *)file->private_data;
+ dev = file->private_data;
/* verify that we actually have some data to write */
if (count == 0)
iso_out = e;
}
}
- if ((in && out) || (iso_in && iso_out))
+ if ((in && out) || iso_in || iso_out)
goto found;
}
return -EINVAL;
dev->in_iso_pipe = usb_rcvisocpipe (udev,
iso_in->desc.bEndpointAddress
& USB_ENDPOINT_NUMBER_MASK);
+ }
+
+ if (iso_out) {
dev->iso_out = &iso_out->desc;
dev->out_iso_pipe = usb_sndisocpipe (udev,
iso_out->desc.bEndpointAddress
break;
}
}
- simple_free_urb (urb);
ctx->pending--;
if (ctx->pending == 0) {
}
simple_free_urb (urbs [i]);
+ urbs[i] = NULL;
context.pending--;
context.submit_error = 1;
break;
wait_for_completion (&context.done);
+ for (i = 0; i < param->sglen; i++) {
+ if (urbs[i])
+ simple_free_urb(urbs[i]);
+ }
/*
* Isochronous transfers are expected to fail sometimes. As an
* arbitrary limit, we will report an error if any submissions
* off just killing the userspace task and waiting for it to exit.
*/
+/* No BKL needed */
static int
usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
{
.name = "usbtest",
.id_table = id_table,
.probe = usbtest_probe,
- .ioctl = usbtest_ioctl,
+ .unlocked_ioctl = usbtest_ioctl,
.disconnect = usbtest_disconnect,
.suspend = usbtest_suspend,
.resume = usbtest_resume,
size_t size;
int rc;
- lock_kernel();
mutex_lock(&mon_lock);
if ((mbus = mon_bus_lookup(iminor(inode))) == NULL) {
mutex_unlock(&mon_lock);
- unlock_kernel();
return -ENODEV;
}
if (mbus != &mon_bus0 && mbus->u_bus == NULL) {
printk(KERN_ERR TAG ": consistency error on open\n");
mutex_unlock(&mon_lock);
- unlock_kernel();
return -ENODEV;
}
file->private_data = rp;
mutex_unlock(&mon_lock);
- unlock_kernel();
return 0;
err_allocbuff:
kfree(rp);
err_alloc:
mutex_unlock(&mon_lock);
- unlock_kernel();
return rc;
}
/*
*/
-static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static long mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct mon_reader_bin *rp = file->private_data;
// struct mon_bus* mbus = rp->r.m_bus;
mutex_lock(&rp->fetch_lock);
spin_lock_irqsave(&rp->b_lock, flags);
- mon_free_buff(rp->b_vec, size/CHUNK_SIZE);
+ mon_free_buff(rp->b_vec, rp->b_size/CHUNK_SIZE);
kfree(rp->b_vec);
rp->b_vec = vec;
rp->b_size = size;
return ret;
}
-static long mon_bin_unlocked_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int ret;
-
- lock_kernel();
- ret = mon_bin_ioctl(file, cmd, arg);
- unlock_kernel();
-
- return ret;
-}
-
-
#ifdef CONFIG_COMPAT
static long mon_bin_compat_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
.read = mon_bin_read,
/* .write = mon_text_write, */
.poll = mon_bin_poll,
- .unlocked_ioctl = mon_bin_unlocked_ioctl,
+ .unlocked_ioctl = mon_bin_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = mon_bin_compat_ioctl,
#endif
#ifdef CONFIG_USB_MUSB_HDRC_HCD
if (int_usb & MUSB_INTR_CONNECT) {
struct usb_hcd *hcd = musb_to_hcd(musb);
- void __iomem *mbase = musb->mregs;
handled = IRQ_HANDLED;
musb->is_active = 1;
if (is_peripheral_active(musb)) {
/* REVISIT HNP; just force disconnect */
}
- musb_writew(mbase, MUSB_INTRTXE, musb->epmask);
- musb_writew(mbase, MUSB_INTRRXE, musb->epmask & 0xfffe);
- musb_writeb(mbase, MUSB_INTRUSBE, 0xf7);
+ musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask);
+ musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+ musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
#endif
musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
|USB_PORT_STAT_HIGH_SPEED
{ "LS_EOF1", 0x7E, 8 },
{ "SOFT_RST", 0x7F, 8 },
{ "DMA_CNTLch0", 0x204, 16 },
- { "DMA_ADDRch0", 0x208, 16 },
- { "DMA_COUNTch0", 0x20C, 16 },
+ { "DMA_ADDRch0", 0x208, 32 },
+ { "DMA_COUNTch0", 0x20C, 32 },
{ "DMA_CNTLch1", 0x214, 16 },
- { "DMA_ADDRch1", 0x218, 16 },
- { "DMA_COUNTch1", 0x21C, 16 },
+ { "DMA_ADDRch1", 0x218, 32 },
+ { "DMA_COUNTch1", 0x21C, 32 },
{ "DMA_CNTLch2", 0x224, 16 },
- { "DMA_ADDRch2", 0x228, 16 },
- { "DMA_COUNTch2", 0x22C, 16 },
+ { "DMA_ADDRch2", 0x228, 32 },
+ { "DMA_COUNTch2", 0x22C, 32 },
{ "DMA_CNTLch3", 0x234, 16 },
- { "DMA_ADDRch3", 0x238, 16 },
- { "DMA_COUNTch3", 0x23C, 16 },
+ { "DMA_ADDRch3", 0x238, 32 },
+ { "DMA_COUNTch3", 0x23C, 32 },
{ "DMA_CNTLch4", 0x244, 16 },
- { "DMA_ADDRch4", 0x248, 16 },
- { "DMA_COUNTch4", 0x24C, 16 },
+ { "DMA_ADDRch4", 0x248, 32 },
+ { "DMA_COUNTch4", 0x24C, 32 },
{ "DMA_CNTLch5", 0x254, 16 },
- { "DMA_ADDRch5", 0x258, 16 },
- { "DMA_COUNTch5", 0x25C, 16 },
+ { "DMA_ADDRch5", 0x258, 32 },
+ { "DMA_COUNTch5", 0x25C, 32 },
{ "DMA_CNTLch6", 0x264, 16 },
- { "DMA_ADDRch6", 0x268, 16 },
- { "DMA_COUNTch6", 0x26C, 16 },
+ { "DMA_ADDRch6", 0x268, 32 },
+ { "DMA_COUNTch6", 0x26C, 32 },
{ "DMA_CNTLch7", 0x274, 16 },
- { "DMA_ADDRch7", 0x278, 16 },
- { "DMA_COUNTch7", 0x27C, 16 },
+ { "DMA_ADDRch7", 0x278, 32 },
+ { "DMA_COUNTch7", 0x27C, 32 },
{ } /* Terminating Entry */
};
musb->g.a_alt_hnp_support = 1;
break;
#endif
+ case USB_DEVICE_DEBUG_MODE:
+ handled = 0;
+ break;
stall:
default:
handled = -EINVAL;
spin_lock_irqsave(&musb->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) {
spin_unlock_irqrestore(&musb->lock, flags);
return -ESHUTDOWN;
}
musb_channel->max_packet_sz = packet_sz;
channel->status = MUSB_DMA_STATUS_BUSY;
- if ((mode == 1) && (len >= packet_sz))
- configure_channel(channel, packet_sz, 1, dma_addr, len);
- else
- configure_channel(channel, packet_sz, 0, dma_addr, len);
+ configure_channel(channel, packet_sz, mode, dma_addr, len);
return true;
}
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/mux.h>
-
#include "musb_core.h"
#include "omap2430.h"
u32 l;
struct omap_musb_board_data *data = board_data;
-#if defined(CONFIG_ARCH_OMAP2430)
- omap_cfg_reg(AE5_2430_USB0HS_STP);
-#endif
-
/* We require some kind of external transceiver, hooked
* up through ULPI. TWL4030-family PMICs include one,
* which needs a driver, drivers aren't always needed.
Enable this to support ULPI connected USB OTG transceivers which
are likely found on embedded boards.
- The only chip currently supported is NXP's ISP1504
-
config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
depends on TWL4030_CORE && REGULATOR_TWL4030
#define ULPI_ID(vendor, product) (((vendor) << 16) | (product))
-#define TR_FLAG(flags, a, b) (((flags) & a) ? b : 0)
-
/* ULPI hardcoded IDs, used for probing */
static unsigned int ulpi_ids[] = {
ULPI_ID(0x04cc, 0x1504), /* NXP ISP1504 */
+ ULPI_ID(0x0424, 0x0006), /* SMSC USB3319 */
};
-static int ulpi_set_flags(struct otg_transceiver *otg)
+static int ulpi_set_otg_flags(struct otg_transceiver *otg)
{
- unsigned int flags = 0;
+ unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN |
+ ULPI_OTG_CTRL_DM_PULLDOWN;
- if (otg->flags & USB_OTG_PULLUP_ID)
+ if (otg->flags & ULPI_OTG_ID_PULLUP)
flags |= ULPI_OTG_CTRL_ID_PULLUP;
- if (otg->flags & USB_OTG_PULLDOWN_DM)
- flags |= ULPI_OTG_CTRL_DM_PULLDOWN;
+ /*
+ * ULPI Specification rev.1.1 default
+ * for Dp/DmPulldown is enabled.
+ */
+ if (otg->flags & ULPI_OTG_DP_PULLDOWN_DIS)
+ flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN;
- if (otg->flags & USB_OTG_PULLDOWN_DP)
- flags |= ULPI_OTG_CTRL_DP_PULLDOWN;
+ if (otg->flags & ULPI_OTG_DM_PULLDOWN_DIS)
+ flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN;
- if (otg->flags & USB_OTG_EXT_VBUS_INDICATOR)
+ if (otg->flags & ULPI_OTG_EXTVBUSIND)
flags |= ULPI_OTG_CTRL_EXTVBUSIND;
- return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL));
+ return otg_io_write(otg, flags, ULPI_OTG_CTRL);
+}
+
+static int ulpi_set_fc_flags(struct otg_transceiver *otg)
+{
+ unsigned int flags = 0;
+
+ /*
+ * ULPI Specification rev.1.1 default
+ * for XcvrSelect is Full Speed.
+ */
+ if (otg->flags & ULPI_FC_HS)
+ flags |= ULPI_FUNC_CTRL_HIGH_SPEED;
+ else if (otg->flags & ULPI_FC_LS)
+ flags |= ULPI_FUNC_CTRL_LOW_SPEED;
+ else if (otg->flags & ULPI_FC_FS4LS)
+ flags |= ULPI_FUNC_CTRL_FS4LS;
+ else
+ flags |= ULPI_FUNC_CTRL_FULL_SPEED;
+
+ if (otg->flags & ULPI_FC_TERMSEL)
+ flags |= ULPI_FUNC_CTRL_TERMSELECT;
+
+ /*
+ * ULPI Specification rev.1.1 default
+ * for OpMode is Normal Operation.
+ */
+ if (otg->flags & ULPI_FC_OP_NODRV)
+ flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+ else if (otg->flags & ULPI_FC_OP_DIS_NRZI)
+ flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI;
+ else if (otg->flags & ULPI_FC_OP_NSYNC_NEOP)
+ flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP;
+ else
+ flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
+
+ /*
+ * ULPI Specification rev.1.1 default
+ * for SuspendM is Powered.
+ */
+ flags |= ULPI_FUNC_CTRL_SUSPENDM;
+
+ return otg_io_write(otg, flags, ULPI_FUNC_CTRL);
+}
+
+static int ulpi_set_ic_flags(struct otg_transceiver *otg)
+{
+ unsigned int flags = 0;
+
+ if (otg->flags & ULPI_IC_AUTORESUME)
+ flags |= ULPI_IFC_CTRL_AUTORESUME;
+
+ if (otg->flags & ULPI_IC_EXTVBUS_INDINV)
+ flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS;
+
+ if (otg->flags & ULPI_IC_IND_PASSTHRU)
+ flags |= ULPI_IFC_CTRL_PASSTHRU;
+
+ if (otg->flags & ULPI_IC_PROTECT_DIS)
+ flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE;
+
+ return otg_io_write(otg, flags, ULPI_IFC_CTRL);
+}
+
+static int ulpi_set_flags(struct otg_transceiver *otg)
+{
+ int ret;
+
+ ret = ulpi_set_otg_flags(otg);
+ if (ret)
+ return ret;
+
+ ret = ulpi_set_ic_flags(otg);
+ if (ret)
+ return ret;
+
+ return ulpi_set_fc_flags(otg);
}
static int ulpi_init(struct otg_transceiver *otg)
return -ENODEV;
}
+static int ulpi_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+{
+ unsigned int flags = otg_io_read(otg, ULPI_IFC_CTRL);
+
+ if (!host) {
+ otg->host = NULL;
+ return 0;
+ }
+
+ otg->host = host;
+
+ flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE |
+ ULPI_IFC_CTRL_3_PIN_SERIAL_MODE |
+ ULPI_IFC_CTRL_CARKITMODE);
+
+ if (otg->flags & ULPI_IC_6PIN_SERIAL)
+ flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE;
+ else if (otg->flags & ULPI_IC_3PIN_SERIAL)
+ flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE;
+ else if (otg->flags & ULPI_IC_CARKIT)
+ flags |= ULPI_IFC_CTRL_CARKITMODE;
+
+ return otg_io_write(otg, flags, ULPI_IFC_CTRL);
+}
+
static int ulpi_set_vbus(struct otg_transceiver *otg, bool on)
{
unsigned int flags = otg_io_read(otg, ULPI_OTG_CTRL);
flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT);
if (on) {
- if (otg->flags & USB_OTG_DRV_VBUS)
+ if (otg->flags & ULPI_OTG_DRVVBUS)
flags |= ULPI_OTG_CTRL_DRVVBUS;
- if (otg->flags & USB_OTG_DRV_VBUS_EXT)
+ if (otg->flags & ULPI_OTG_DRVVBUS_EXT)
flags |= ULPI_OTG_CTRL_DRVVBUS_EXT;
}
- return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL));
+ return otg_io_write(otg, flags, ULPI_OTG_CTRL);
}
struct otg_transceiver *
otg->flags = flags;
otg->io_ops = ops;
otg->init = ulpi_init;
+ otg->set_host = ulpi_set_host;
otg->set_vbus = ulpi_set_vbus;
return otg;
To compile this driver as a module, choose M here: the
module will be called zio.
+config USB_SERIAL_SSU100
+ tristate "USB Quatech SSU-100 Single Port Serial Driver"
+ help
+ Say Y here if you want to use the Quatech SSU-100 single
+ port usb to serial adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ssu100.
+
config USB_SERIAL_DEBUG
tristate "USB Debugging Device"
help
obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o
obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o
obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o
+obj-$(CONFIG_USB_SERIAL_SSU100) += ssu100.o
obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o
obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
+ { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
+ { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
+ { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
+ { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
{ } /* Terminating Entry */
};
static void digi_wakeup_write(struct usb_serial_port *port)
{
struct tty_struct *tty = tty_port_tty_get(&port->port);
- tty_wakeup(tty);
- tty_kref_put(tty);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
priv->dp_throttle_restart = 1;
/* receive data */
- if (opcode == DIGI_CMD_RECEIVE_DATA) {
+ if (tty && opcode == DIGI_CMD_RECEIVE_DATA) {
/* get flag from port_status */
flag = 0;
return -1;
tty = tty_port_tty_get(&port->port);
+
rts = 0;
- rts = tty->termios->c_cflag & CRTSCTS;
+ if (tty)
+ rts = tty->termios->c_cflag & CRTSCTS;
- if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
+ if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
spin_lock(&priv->dp_port_lock);
/* convert from digi flags to termiox flags */
if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
+/* US Interface Navigator (http://www.usinterface.com/) */
+#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */
+#define FTDI_USINT_WKEY_PID 0xb811 /* Navigator WKEY and FSK lines */
+#define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */
+
/* OOCDlink by Joern Kaipf <joernk@web.de>
* (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
#define XVERVE_SIGNALYZER_SH2_PID 0xBCA2
#define XVERVE_SIGNALYZER_SH4_PID 0xBCA4
+/*
+ * Segway Robotic Mobility Platform USB interface (using VID 0x0403)
+ * Submitted by John G. Rogers
+ */
+#define SEGWAY_RMP200_PID 0xe729
urb->transfer_buffer_length = count;
usb_serial_debug_data(debug, &port->dev, __func__, count,
urb->transfer_buffer);
+ spin_lock_irqsave(&port->lock, flags);
+ port->tx_bytes += count;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ clear_bit(i, &port->write_urbs_free);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s - error submitting urb: %d\n",
__func__, result);
+ set_bit(i, &port->write_urbs_free);
+ spin_lock_irqsave(&port->lock, flags);
+ port->tx_bytes -= count;
+ spin_unlock_irqrestore(&port->lock, flags);
+
clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
return result;
}
- clear_bit(i, &port->write_urbs_free);
-
- spin_lock_irqsave(&port->lock, flags);
- port->tx_bytes += count;
- spin_unlock_irqrestore(&port->lock, flags);
/* Try sending off another urb, unless in irq context (in which case
* there will be no free urb). */
kfree(header);
kfree(rom_desc);
kfree(ti_manuf_desc);
- return status;
+ return -EINVAL;
}
/* verify the write -- must do this in order for
kfree(header);
kfree(rom_desc);
kfree(ti_manuf_desc);
- return status;
+ return -EINVAL;
}
kfree(vheader);
{ USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
{ USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */
{ USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */
- { USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC smartphone modems */
{ } /* Terminating entry */
};
/*
* Infinity Unlimited USB Phoenix driver
*
+ * Copyright (C) 2010 James Courtier-Dutton (James@superbug.co.uk)
+
* Copyright (C) 2007 Alain Degreffe (eczema@ecze.com)
*
* Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás)
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.11"
+#define DRIVER_VERSION "v0.12"
#define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
static const struct usb_device_id id_table[] = {
u8 *dbgbuf; /* debug buffer */
u8 len;
int vcc; /* vcc (either 3 or 5 V) */
+ u32 baud;
+ u32 boost;
+ u32 clk;
};
port->number, set, clear);
spin_lock_irqsave(&priv->lock, flags);
- if (set & TIOCM_RTS)
- priv->tiostatus = TIOCM_RTS;
- if (!(set & TIOCM_RTS) && priv->tiostatus == TIOCM_RTS) {
+ if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) {
dbg("%s TIOCMSET RESET called !!!", __func__);
priv->reset = 1;
}
+ if (set & TIOCM_RTS)
+ priv->tiostatus = TIOCM_RTS;
+
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
return status;
}
-static int iuu_uart_baud(struct usb_serial_port *port, u32 baud,
+static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base,
u32 *actual, u8 parity)
{
int status;
+ u32 baud;
u8 *dataout;
u8 DataCount = 0;
u8 T1Frekvens = 0;
u8 T1reload = 0;
unsigned int T1FrekvensHZ = 0;
+ dbg("%s - enter baud_base=%d", __func__, baud_base);
dataout = kmalloc(sizeof(u8) * 5, GFP_KERNEL);
if (!dataout)
return -ENOMEM;
+ /*baud = (((priv->clk / 35) * baud_base) / 100000); */
+ baud = baud_base;
if (baud < 1200 || baud > 230400) {
kfree(dataout);
struct usb_serial_port *port, struct ktermios *old_termios)
{
const u32 supported_mask = CMSPAR|PARENB|PARODD;
-
+ struct iuu_private *priv = usb_get_serial_port_data(port);
unsigned int cflag = tty->termios->c_cflag;
int status;
u32 actual;
u32 parity;
int csize = CS7;
- int baud = 9600; /* Fixed for the moment */
+ int baud;
u32 newval = cflag & supported_mask;
+ /* Just use the ospeed. ispeed should be the same. */
+ baud = tty->termios->c_ospeed;
+
+ dbg("%s - enter c_ospeed or baud=%d", __func__, baud);
+
/* compute the parity parameter */
parity = 0;
if (cflag & CMSPAR) { /* Using mark space */
/* set it */
status = iuu_uart_baud(port,
- (clockmode == 2) ? 16457 : 9600 * boost / 100,
+ baud * priv->boost / 100,
&actual, parity);
/* set the termios value to the real one, so the user now what has
* changed. We support few fields so its easies to copy the old hw
* settings back over and then adjust them
*/
- if (old_termios)
- tty_termios_copy_hw(tty->termios, old_termios);
+ if (old_termios)
+ tty_termios_copy_hw(tty->termios, old_termios);
if (status != 0) /* Set failed - return old bits */
return;
/* Re-encode speed, parity and csize */
static void iuu_init_termios(struct tty_struct *tty)
{
+ dbg("%s - enter", __func__);
*(tty->termios) = tty_std_termios;
tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
| TIOCM_CTS | CSTOPB | PARENB;
struct usb_serial *serial = port->serial;
u8 *buf;
int result;
+ int baud;
u32 actual;
struct iuu_private *priv = usb_get_serial_port_data(port);
- dbg("%s - port %d", __func__, port->number);
+ baud = tty->termios->c_ospeed;
+ tty->termios->c_ispeed = baud;
+ /* Re-encode speed */
+ tty_encode_baud_rate(tty, baud, baud);
+
+ dbg("%s - port %d, baud %d", __func__, port->number, baud);
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
iuu_uart_on(port);
if (boost < 100)
boost = 100;
+ priv->boost = boost;
+ priv->baud = baud;
switch (clockmode) {
case 2: /* 3.680 Mhz */
+ priv->clk = IUU_CLK_3680000;
iuu_clk(port, IUU_CLK_3680000 * boost / 100);
result =
- iuu_uart_baud(port, 9600 * boost / 100, &actual,
+ iuu_uart_baud(port, baud * boost / 100, &actual,
IUU_PARITY_EVEN);
break;
case 3: /* 6.00 Mhz */
iuu_clk(port, IUU_CLK_6000000 * boost / 100);
+ priv->clk = IUU_CLK_6000000;
+ /* Ratio of 6000000 to 3500000 for baud 9600 */
result =
iuu_uart_baud(port, 16457 * boost / 100, &actual,
IUU_PARITY_EVEN);
break;
default: /* 3.579 Mhz */
iuu_clk(port, IUU_CLK_3579000 * boost / 100);
+ priv->clk = IUU_CLK_3579000;
result =
- iuu_uart_baud(port, 9600 * boost / 100, &actual,
+ iuu_uart_baud(port, baud * boost / 100, &actual,
IUU_PARITY_EVEN);
}
#define HUAWEI_PRODUCT_E143D 0x143D
#define HUAWEI_PRODUCT_E143E 0x143E
#define HUAWEI_PRODUCT_E143F 0x143F
+#define HUAWEI_PRODUCT_K4505 0x1464
+#define HUAWEI_PRODUCT_K3765 0x1465
#define HUAWEI_PRODUCT_E14AC 0x14AC
+#define HUAWEI_PRODUCT_ETS1220 0x1803
#define QUANTA_VENDOR_ID 0x0408
#define QUANTA_PRODUCT_Q101 0xEA02
#define BANDRICH_PRODUCT_1011 0x1011
#define BANDRICH_PRODUCT_1012 0x1012
-#define AMOI_VENDOR_ID 0x1614
-#define AMOI_PRODUCT_9508 0x0800
-
#define QUALCOMM_VENDOR_ID 0x05C6
#define CMOTECH_VENDOR_ID 0x16d8
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
- { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */
serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
return -ENODEV;
+ /* Don't bind network interfaces on Huawei K3765 & K4505 */
+ if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID &&
+ (serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 ||
+ serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) &&
+ serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
+ return -ENODEV;
+
data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
if (!data)
--- /dev/null
+/*
+ * usb-serial driver for Quatech SSU-100
+ *
+ * based on ftdi_sio.c and the original serqt_usb.c from Quatech
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+#define QT_OPEN_CLOSE_CHANNEL 0xca
+#define QT_SET_GET_DEVICE 0xc2
+#define QT_SET_GET_REGISTER 0xc0
+#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc
+#define QT_SET_ATF 0xcd
+#define QT_GET_SET_UART 0xc1
+#define QT_TRANSFER_IN 0xc0
+#define QT_HW_FLOW_CONTROL_MASK 0xc5
+#define QT_SW_FLOW_CONTROL_MASK 0xc6
+
+#define MODEM_CTL_REGISTER 0x04
+#define MODEM_STATUS_REGISTER 0x06
+
+
+#define SERIAL_LSR_OE 0x02
+#define SERIAL_LSR_PE 0x04
+#define SERIAL_LSR_FE 0x08
+#define SERIAL_LSR_BI 0x10
+
+#define SERIAL_LSR_TEMT 0x40
+
+#define SERIAL_MCR_DTR 0x01
+#define SERIAL_MCR_RTS 0x02
+#define SERIAL_MCR_LOOP 0x10
+
+#define SERIAL_MSR_CTS 0x10
+#define SERIAL_MSR_CD 0x80
+#define SERIAL_MSR_RI 0x40
+#define SERIAL_MSR_DSR 0x20
+#define SERIAL_MSR_MASK 0xf0
+
+#define SERIAL_CRTSCTS ((SERIAL_MCR_RTS << 8) | SERIAL_MSR_CTS)
+
+#define SERIAL_8_DATA 0x03
+#define SERIAL_7_DATA 0x02
+#define SERIAL_6_DATA 0x01
+#define SERIAL_5_DATA 0x00
+
+#define SERIAL_ODD_PARITY 0X08
+#define SERIAL_EVEN_PARITY 0X18
+
+#define MAX_BAUD_RATE 460800
+
+#define ATC_DISABLED 0x00
+#define DUPMODE_BITS 0xc0
+#define RR_BITS 0x03
+#define LOOPMODE_BITS 0x41
+#define RS232_MODE 0x00
+#define RTSCTS_TO_CONNECTOR 0x40
+#define CLKS_X4 0x02
+#define FULLPWRBIT 0x00000080
+#define NEXT_BOARD_POWER_BIT 0x00000004
+
+static int debug = 1;
+
+/* Version Information */
+#define DRIVER_VERSION "v0.1"
+#define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver"
+
+#define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */
+#define QUATECH_SSU100 0xC020 /* SSU100 */
+
+static const struct usb_device_id id_table[] = {
+ {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+
+static struct usb_driver ssu100_driver = {
+ .name = "ssu100",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .suspend = usb_serial_suspend,
+ .resume = usb_serial_resume,
+ .no_dynamic_id = 1,
+ .supports_autosuspend = 1,
+};
+
+struct ssu100_port_private {
+ u8 shadowLSR;
+ u8 shadowMSR;
+ wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
+ unsigned short max_packet_size;
+};
+
+static void ssu100_release(struct usb_serial *serial)
+{
+ struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port);
+
+ dbg("%s", __func__);
+ kfree(priv);
+}
+
+static inline int ssu100_control_msg(struct usb_device *dev,
+ u8 request, u16 data, u16 index)
+{
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ request, 0x40, data, index,
+ NULL, 0, 300);
+}
+
+static inline int ssu100_setdevice(struct usb_device *dev, u8 *data)
+{
+ u16 x = ((u16)(data[1] << 8) | (u16)(data[0]));
+
+ return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
+}
+
+
+static inline int ssu100_getdevice(struct usb_device *dev, u8 *data)
+{
+ return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ QT_SET_GET_DEVICE, 0xc0, 0, 0,
+ data, 3, 300);
+}
+
+static inline int ssu100_getregister(struct usb_device *dev,
+ unsigned short uart,
+ unsigned short reg,
+ u8 *data)
+{
+ return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ QT_SET_GET_REGISTER, 0xc0, reg,
+ uart, data, sizeof(*data), 300);
+
+}
+
+
+static inline int ssu100_setregister(struct usb_device *dev,
+ unsigned short uart,
+ u16 data)
+{
+ u16 value = (data << 8) | MODEM_CTL_REGISTER;
+
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ QT_SET_GET_REGISTER, 0x40, value, uart,
+ NULL, 0, 300);
+
+}
+
+#define set_mctrl(dev, set) update_mctrl((dev), (set), 0)
+#define clear_mctrl(dev, clear) update_mctrl((dev), 0, (clear))
+
+/* these do not deal with device that have more than 1 port */
+static inline int update_mctrl(struct usb_device *dev, unsigned int set,
+ unsigned int clear)
+{
+ unsigned urb_value;
+ int result;
+
+ if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+ dbg("%s - DTR|RTS not being set|cleared", __func__);
+ return 0; /* no change */
+ }
+
+ clear &= ~set; /* 'set' takes precedence over 'clear' */
+ urb_value = 0;
+ if (set & TIOCM_DTR)
+ urb_value |= SERIAL_MCR_DTR;
+ if (set & TIOCM_RTS)
+ urb_value |= SERIAL_MCR_RTS;
+
+ result = ssu100_setregister(dev, 0, urb_value);
+ if (result < 0)
+ dbg("%s Error from MODEM_CTRL urb", __func__);
+
+ return result;
+}
+
+static int ssu100_initdevice(struct usb_device *dev)
+{
+ u8 *data;
+ int result = 0;
+
+ dbg("%s", __func__);
+
+ data = kzalloc(3, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ result = ssu100_getdevice(dev, data);
+ if (result < 0) {
+ dbg("%s - get_device failed %i", __func__, result);
+ goto out;
+ }
+
+ data[1] &= ~FULLPWRBIT;
+
+ result = ssu100_setdevice(dev, data);
+ if (result < 0) {
+ dbg("%s - setdevice failed %i", __func__, result);
+ goto out;
+ }
+
+ result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0);
+ if (result < 0) {
+ dbg("%s - set prebuffer level failed %i", __func__, result);
+ goto out;
+ }
+
+ result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0);
+ if (result < 0) {
+ dbg("%s - set ATFprebuffer level failed %i", __func__, result);
+ goto out;
+ }
+
+ result = ssu100_getdevice(dev, data);
+ if (result < 0) {
+ dbg("%s - get_device failed %i", __func__, result);
+ goto out;
+ }
+
+ data[0] &= ~(RR_BITS | DUPMODE_BITS);
+ data[0] |= CLKS_X4;
+ data[1] &= ~(LOOPMODE_BITS);
+ data[1] |= RS232_MODE;
+
+ result = ssu100_setdevice(dev, data);
+ if (result < 0) {
+ dbg("%s - setdevice failed %i", __func__, result);
+ goto out;
+ }
+
+out: kfree(data);
+ return result;
+
+}
+
+
+static void ssu100_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old_termios)
+{
+ struct usb_device *dev = port->serial->dev;
+ struct ktermios *termios = tty->termios;
+ u16 baud, divisor, remainder;
+ unsigned int cflag = termios->c_cflag;
+ u16 urb_value = 0; /* will hold the new flags */
+ int result;
+
+ dbg("%s", __func__);
+
+ if (cflag & PARENB) {
+ if (cflag & PARODD)
+ urb_value |= SERIAL_ODD_PARITY;
+ else
+ urb_value |= SERIAL_EVEN_PARITY;
+ }
+
+ switch (cflag & CSIZE) {
+ case CS5:
+ urb_value |= SERIAL_5_DATA;
+ break;
+ case CS6:
+ urb_value |= SERIAL_6_DATA;
+ break;
+ case CS7:
+ urb_value |= SERIAL_7_DATA;
+ break;
+ default:
+ case CS8:
+ urb_value |= SERIAL_8_DATA;
+ break;
+ }
+
+ baud = tty_get_baud_rate(tty);
+ if (!baud)
+ baud = 9600;
+
+ dbg("%s - got baud = %d\n", __func__, baud);
+
+
+ divisor = MAX_BAUD_RATE / baud;
+ remainder = MAX_BAUD_RATE % baud;
+ if (((remainder * 2) >= baud) && (baud != 110))
+ divisor++;
+
+ urb_value = urb_value << 8;
+
+ result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value);
+ if (result < 0)
+ dbg("%s - set uart failed", __func__);
+
+ if (cflag & CRTSCTS)
+ result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+ SERIAL_CRTSCTS, 0);
+ else
+ result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+ 0, 0);
+ if (result < 0)
+ dbg("%s - set HW flow control failed", __func__);
+
+ if (I_IXOFF(tty) || I_IXON(tty)) {
+ u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty)));
+
+ result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+ x, 0);
+ } else
+ result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+ 0, 0);
+
+ if (result < 0)
+ dbg("%s - set SW flow control failed", __func__);
+
+}
+
+
+static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ struct usb_device *dev = port->serial->dev;
+ struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+ u8 *data;
+ int result;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ data = kzalloc(2, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ QT_OPEN_CLOSE_CHANNEL,
+ QT_TRANSFER_IN, 0x01,
+ 0, data, 2, 300);
+ if (result < 0) {
+ dbg("%s - open failed %i", __func__, result);
+ kfree(data);
+ return result;
+ }
+
+ priv->shadowLSR = data[0] & (SERIAL_LSR_OE | SERIAL_LSR_PE |
+ SERIAL_LSR_FE | SERIAL_LSR_BI);
+
+ priv->shadowMSR = data[1] & (SERIAL_MSR_CTS | SERIAL_MSR_DSR |
+ SERIAL_MSR_RI | SERIAL_MSR_CD);
+
+ kfree(data);
+
+/* set to 9600 */
+ result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300);
+ if (result < 0)
+ dbg("%s - set uart failed", __func__);
+
+ if (tty)
+ ssu100_set_termios(tty, port, tty->termios);
+
+ return usb_serial_generic_open(tty, port);
+}
+
+static void ssu100_close(struct usb_serial_port *port)
+{
+ dbg("%s", __func__);
+ usb_serial_generic_close(port);
+}
+
+static int get_serial_info(struct usb_serial_port *port,
+ struct serial_struct __user *retinfo)
+{
+ struct serial_struct tmp;
+
+ if (!retinfo)
+ return -EFAULT;
+
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.line = port->serial->minor;
+ tmp.port = 0;
+ tmp.irq = 0;
+ tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+ tmp.xmit_fifo_size = port->bulk_out_size;
+ tmp.baud_base = 9600;
+ tmp.close_delay = 5*HZ;
+ tmp.closing_wait = 30*HZ;
+
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+
+ dbg("%s cmd 0x%04x", __func__, cmd);
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ return get_serial_info(port,
+ (struct serial_struct __user *) arg);
+
+ case TIOCMIWAIT:
+ while (priv != NULL) {
+ u8 prevMSR = priv->shadowMSR & SERIAL_MSR_MASK;
+ interruptible_sleep_on(&priv->delta_msr_wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ else {
+ u8 diff = (priv->shadowMSR & SERIAL_MSR_MASK) ^ prevMSR;
+ if (!diff)
+ return -EIO; /* no change => error */
+
+ /* Return 0 if caller wanted to know about
+ these bits */
+
+ if (((arg & TIOCM_RNG) && (diff & SERIAL_MSR_RI)) ||
+ ((arg & TIOCM_DSR) && (diff & SERIAL_MSR_DSR)) ||
+ ((arg & TIOCM_CD) && (diff & SERIAL_MSR_CD)) ||
+ ((arg & TIOCM_CTS) && (diff & SERIAL_MSR_CTS)))
+ return 0;
+ }
+ }
+ return 0;
+
+ default:
+ break;
+ }
+
+ dbg("%s arg not supported", __func__);
+
+ return -ENOIOCTLCMD;
+}
+
+static void ssu100_set_max_packet_size(struct usb_serial_port *port)
+{
+ struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ struct usb_device *udev = serial->dev;
+
+ struct usb_interface *interface = serial->interface;
+ struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
+
+ unsigned num_endpoints;
+ int i;
+
+ num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
+ dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
+
+ for (i = 0; i < num_endpoints; i++) {
+ dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
+ interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
+ ep_desc = &interface->cur_altsetting->endpoint[i].desc;
+ }
+
+ /* set max packet size based on descriptor */
+ priv->max_packet_size = ep_desc->wMaxPacketSize;
+
+ dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
+}
+
+static int ssu100_attach(struct usb_serial *serial)
+{
+ struct ssu100_port_private *priv;
+ struct usb_serial_port *port = *serial->port;
+
+ dbg("%s", __func__);
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
+ sizeof(*priv));
+ return -ENOMEM;
+ }
+
+ init_waitqueue_head(&priv->delta_msr_wait);
+ usb_set_serial_port_data(port, priv);
+
+ ssu100_set_max_packet_size(port);
+
+ return ssu100_initdevice(serial->dev);
+}
+
+static int ssu100_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_device *dev = port->serial->dev;
+ u8 *d;
+ int r;
+
+ dbg("%s\n", __func__);
+
+ d = kzalloc(2, GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ r = ssu100_getregister(dev, 0, MODEM_CTL_REGISTER, d);
+ if (r < 0)
+ goto mget_out;
+
+ r = ssu100_getregister(dev, 0, MODEM_STATUS_REGISTER, d+1);
+ if (r < 0)
+ goto mget_out;
+
+ r = (d[0] & SERIAL_MCR_DTR ? TIOCM_DTR : 0) |
+ (d[0] & SERIAL_MCR_RTS ? TIOCM_RTS : 0) |
+ (d[1] & SERIAL_MSR_CTS ? TIOCM_CTS : 0) |
+ (d[1] & SERIAL_MSR_CD ? TIOCM_CAR : 0) |
+ (d[1] & SERIAL_MSR_RI ? TIOCM_RI : 0) |
+ (d[1] & SERIAL_MSR_DSR ? TIOCM_DSR : 0);
+
+mget_out:
+ kfree(d);
+ return r;
+}
+
+static int ssu100_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_device *dev = port->serial->dev;
+
+ dbg("%s\n", __func__);
+ return update_mctrl(dev, set, clear);
+}
+
+static void ssu100_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct usb_device *dev = port->serial->dev;
+
+ dbg("%s\n", __func__);
+
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected) {
+ /* Disable flow control */
+ if (!on &&
+ ssu100_setregister(dev, 0, 0) < 0)
+ dev_err(&port->dev, "error from flowcontrol urb\n");
+ /* drop RTS and DTR */
+ if (on)
+ set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+ else
+ clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+ }
+ mutex_unlock(&port->serial->disc_mutex);
+}
+
+static int ssu100_process_packet(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ssu100_port_private *priv,
+ char *packet, int len)
+{
+ int i;
+ char flag;
+ char *ch;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ if (len < 4) {
+ dbg("%s - malformed packet", __func__);
+ return 0;
+ }
+
+ if ((packet[0] == 0x1b) && (packet[1] == 0x1b) &&
+ ((packet[2] == 0x00) || (packet[2] == 0x01))) {
+ if (packet[2] == 0x00)
+ priv->shadowLSR = packet[3] & (SERIAL_LSR_OE |
+ SERIAL_LSR_PE |
+ SERIAL_LSR_FE |
+ SERIAL_LSR_BI);
+
+ if (packet[2] == 0x01) {
+ priv->shadowMSR = packet[3];
+ wake_up_interruptible(&priv->delta_msr_wait);
+ }
+
+ len -= 4;
+ ch = packet + 4;
+ } else
+ ch = packet;
+
+ if (!len)
+ return 0; /* status only */
+
+ if (port->port.console && port->sysrq) {
+ for (i = 0; i < len; i++, ch++) {
+ if (!usb_serial_handle_sysrq_char(tty, port, *ch))
+ tty_insert_flip_char(tty, *ch, flag);
+ }
+ } else
+ tty_insert_flip_string_fixed_flag(tty, ch, flag, len);
+
+ return len;
+}
+
+static void ssu100_process_read_urb(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+ char *data = (char *)urb->transfer_buffer;
+ struct tty_struct *tty;
+ int count = 0;
+ int i;
+ int len;
+
+ dbg("%s", __func__);
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return;
+
+ for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
+ len = min_t(int, urb->actual_length - i, priv->max_packet_size);
+ count += ssu100_process_packet(tty, port, priv, &data[i], len);
+ }
+
+ if (count)
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+}
+
+
+static struct usb_serial_driver ssu100_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ssu100",
+ },
+ .description = DRIVER_DESC,
+ .id_table = id_table,
+ .usb_driver = &ssu100_driver,
+ .num_ports = 1,
+ .bulk_in_size = 256,
+ .bulk_out_size = 256,
+ .open = ssu100_open,
+ .close = ssu100_close,
+ .attach = ssu100_attach,
+ .release = ssu100_release,
+ .dtr_rts = ssu100_dtr_rts,
+ .process_read_urb = ssu100_process_read_urb,
+ .tiocmget = ssu100_tiocmget,
+ .tiocmset = ssu100_tiocmset,
+ .ioctl = ssu100_ioctl,
+ .set_termios = ssu100_set_termios,
+};
+
+static int __init ssu100_init(void)
+{
+ int retval;
+
+ dbg("%s", __func__);
+
+ /* register with usb-serial */
+ retval = usb_serial_register(&ssu100_device);
+
+ if (retval)
+ goto failed_usb_sio_register;
+
+ retval = usb_register(&ssu100_driver);
+ if (retval)
+ goto failed_usb_register;
+
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
+
+ return 0;
+
+failed_usb_register:
+ usb_serial_deregister(&ssu100_device);
+failed_usb_sio_register:
+ return retval;
+}
+
+static void __exit ssu100_exit(void)
+{
+ usb_deregister(&ssu100_driver);
+ usb_serial_deregister(&ssu100_device);
+}
+
+module_init(ssu100_init);
+module_exit(ssu100_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
return id;
}
+/* Caller must hold table_lock */
static struct usb_serial_driver *search_serial_device(
struct usb_interface *iface)
{
int num_ports = 0;
int max_endpoints;
- lock_kernel(); /* guard against unloading a serial driver module */
+ mutex_lock(&table_lock);
type = search_serial_device(interface);
if (!type) {
- unlock_kernel();
+ mutex_unlock(&table_lock);
dbg("none matched");
return -ENODEV;
}
+ if (!try_module_get(type->driver.owner)) {
+ mutex_unlock(&table_lock);
+ dev_err(&interface->dev, "module get failed, exiting\n");
+ return -EIO;
+ }
+ mutex_unlock(&table_lock);
+
serial = create_serial(dev, interface, type);
if (!serial) {
- unlock_kernel();
dev_err(&interface->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
if (type->probe) {
const struct usb_device_id *id;
- if (!try_module_get(type->driver.owner)) {
- unlock_kernel();
- dev_err(&interface->dev,
- "module get failed, exiting\n");
- kfree(serial);
- return -EIO;
- }
-
id = get_iface_id(type, interface);
retval = type->probe(serial, id);
module_put(type->driver.owner);
if (retval) {
- unlock_kernel();
dbg("sub driver rejected device");
kfree(serial);
return retval;
* properly during a later invocation of usb_serial_probe
*/
if (num_bulk_in == 0 || num_bulk_out == 0) {
- unlock_kernel();
dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
kfree(serial);
return -ENODEV;
if (type == &usb_serial_generic_device) {
num_ports = num_bulk_out;
if (num_ports == 0) {
- unlock_kernel();
dev_err(&interface->dev,
"Generic device with no bulk out, not allowed.\n");
kfree(serial);
/* if this device type has a calc_num_ports function, call it */
if (type->calc_num_ports) {
if (!try_module_get(type->driver.owner)) {
- unlock_kernel();
dev_err(&interface->dev,
"module get failed, exiting\n");
kfree(serial);
max_endpoints = max(max_endpoints, num_interrupt_out);
max_endpoints = max(max_endpoints, (int)serial->num_ports);
serial->num_port_pointers = max_endpoints;
- unlock_kernel();
dbg("%s - setting up %d port structures for this device",
__func__, max_endpoints);
dev_set_name(&port->dev, "ttyUSB%d", port->number);
dbg ("%s - registering %s", __func__, dev_name(&port->dev));
port->dev_state = PORT_REGISTERING;
+ device_enable_async_suspend(&port->dev);
+
retval = device_add(&port->dev);
if (retval) {
dev_err(&port->dev, "Error registering port device, "
driver->description = driver->driver.name;
/* Add this device to our list of devices */
+ mutex_lock(&table_lock);
list_add(&driver->driver_list, &usb_serial_driver_list);
retval = usb_serial_bus_register(driver);
printk(KERN_INFO "USB Serial support registered for %s\n",
driver->description);
+ mutex_unlock(&table_lock);
return retval;
}
EXPORT_SYMBOL_GPL(usb_serial_register);
/* must be called with BKL held */
printk(KERN_INFO "USB Serial deregistering driver %s\n",
device->description);
+ mutex_lock(&table_lock);
list_del(&device->driver_list);
usb_serial_bus_deregister(device);
+ mutex_unlock(&table_lock);
}
EXPORT_SYMBOL_GPL(usb_serial_deregister);
/* The firmware will time-out commands after 20 seconds. Some commands
* can legitimately take longer than this, so we use a different
* command that only waits for the interrupt and then sends status,
- * without having to send a new ATAPI command to the device.
+ * without having to send a new ATAPI command to the device.
*
* NOTE: There is some indication that a data transfer after a timeout
* may not work, but that is a condition that should never happen.
/* Find the length we desire to read. */
switch (srb->cmnd[0]) {
- case INQUIRY:
- case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
- case MODE_SENSE:
- case MODE_SENSE_10:
- length = le16_to_cpu(fst->Count);
- break;
- default:
- length = scsi_bufflen(srb);
+ case INQUIRY:
+ case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
+ case MODE_SENSE:
+ case MODE_SENSE_10:
+ length = le16_to_cpu(fst->Count);
+ break;
+ default:
+ length = scsi_bufflen(srb);
}
/* verify that this amount is legal */
/* should never hit here -- filtered in usb.c */
US_DEBUGP ("freecom unimplemented direction: %d\n",
us->srb->sc_data_direction);
- // Return fail, SCSI seems to handle this better.
+ /* Return fail, SCSI seems to handle this better. */
return USB_STOR_TRANSPORT_FAILED;
break;
}
offset = 0;
}
offset += sprintf (line+offset, "%08x:", i);
- }
- else if ((i & 7) == 0) {
+ } else if ((i & 7) == 0) {
offset += sprintf (line+offset, " -");
}
offset += sprintf (line+offset, " %02x", buffer[i] & 0xff);
int retStatus = ISD200_GOOD;
struct isd200_info *info;
- info = (struct isd200_info *)
- kzalloc(sizeof(struct isd200_info), GFP_KERNEL);
+ info = kzalloc(sizeof(struct isd200_info), GFP_KERNEL);
if (!info)
retStatus = ISD200_ERROR;
else {
else {
US_DEBUG(usb_stor_show_command(us->srb));
us->proto_handler(us->srb, us);
+ usb_mark_last_busy(us->pusb_dev);
}
/* lock access to the state */
/* Should we unbind if no devices were detected? */
}
+ usb_autopm_put_interface(us->pusb_intf);
complete_and_exit(&us->scanning_done, 0);
}
goto BadDevice;
}
+ usb_autopm_get_interface_no_resume(us->pusb_intf);
wake_up_process(th);
return 0;
.pre_reset = usb_stor_pre_reset,
.post_reset = usb_stor_post_reset,
.id_table = usb_storage_usb_ids,
+ .supports_autosuspend = 1,
.soft_unbind = 1,
};
{
struct usb_skel *dev;
- dev = (struct usb_skel *)file->private_data;
+ dev = file->private_data;
if (dev == NULL)
return -ENODEV;
struct usb_skel *dev;
int res;
- dev = (struct usb_skel *)file->private_data;
+ dev = file->private_data;
if (dev == NULL)
return -ENODEV;
int rv;
bool ongoing_io;
- dev = (struct usb_skel *)file->private_data;
+ dev = file->private_data;
/* if we cannot read at all, return EOF */
if (!dev->bulk_in_urb || !count)
char *buf = NULL;
size_t writesize = min(count, (size_t)MAX_TRANSFER);
- dev = (struct usb_skel *)file->private_data;
+ dev = file->private_data;
/* verify that we actually have some data to write */
if (count == 0)
If unsure, say N.
+config SH_MIPI_DSI
+ tristate
+ depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+
+config SH_LCD_MIPI_DSI
+ bool
+
config FB_SH_MOBILE_LCDC
tristate "SuperH Mobile LCDC framebuffer support"
depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
select FB_DEFERRED_IO
+ select SH_MIPI_DSI if SH_LCD_MIPI_DSI
---help---
Frame buffer driver for the on-chip SH-Mobile LCD controller.
+config FB_SH_MOBILE_HDMI
+ tristate "SuperH Mobile HDMI controller support"
+ depends on FB_SH_MOBILE_LCDC
+ select FB_MODE_HELPERS
+ ---help---
+ Driver for the on-chip SH-Mobile HDMI controller.
+
config FB_TMIO
tristate "Toshiba Mobile IO FrameBuffer support"
depends on FB && MFD_CORE
config FB_S3C
tristate "Samsung S3C framebuffer support"
- depends on FB && ARCH_S3C64XX
+ depends on FB && S3C_DEV_FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
obj-$(CONFIG_FB_PS3) += ps3fb.o
obj-$(CONFIG_FB_SM501) += sm501fb.o
obj-$(CONFIG_FB_XILINX) += xilinxfb.o
+obj-$(CONFIG_SH_MIPI_DSI) += sh_mipi_dsi.o
+obj-$(CONFIG_FB_SH_MOBILE_HDMI) += sh_mobile_hdmi.o
obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
obj-$(CONFIG_FB_OMAP) += omap/
obj-y += omap2/
/*
* Disable CLCD clock source.
*/
- clk_disable(fb->clk);
+ if (fb->clk_enabled) {
+ fb->clk_enabled = false;
+ clk_disable(fb->clk);
+ }
}
static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
/*
* Enable the CLCD clock source.
*/
- clk_enable(fb->clk);
+ if (!fb->clk_enabled) {
+ fb->clk_enabled = true;
+ clk_enable(fb->clk);
+ }
/*
* Bring up by first enabling..
return 0;
}
-static int __devinit bw2_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit bw2_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
struct fb_info *info;
return err;
}
-static int __devexit bw2_remove(struct of_device *op)
+static int __devexit bw2_remove(struct platform_device *op)
{
struct fb_info *info = dev_get_drvdata(&op->dev);
struct bw2_par *par = info->par;
{ .size = 0 }
};
-static void cg14_unmap_regs(struct of_device *op, struct fb_info *info,
+static void cg14_unmap_regs(struct platform_device *op, struct fb_info *info,
struct cg14_par *par)
{
if (par->regs)
info->screen_base, info->fix.smem_len);
}
-static int __devinit cg14_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit cg14_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
struct fb_info *info;
return err;
}
-static int __devexit cg14_remove(struct of_device *op)
+static int __devexit cg14_remove(struct platform_device *op)
{
struct fb_info *info = dev_get_drvdata(&op->dev);
struct cg14_par *par = info->par;
return 0;
}
-static int __devinit cg3_probe(struct of_device *op,
+static int __devinit cg3_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
return err;
}
-static int __devexit cg3_remove(struct of_device *op)
+static int __devexit cg3_remove(struct platform_device *op)
{
struct fb_info *info = dev_get_drvdata(&op->dev);
struct cg3_par *par = info->par;
sbus_writel(info->var.yres - 1, &fbc->clipmaxy);
}
-static void cg6_unmap_regs(struct of_device *op, struct fb_info *info,
+static void cg6_unmap_regs(struct platform_device *op, struct fb_info *info,
struct cg6_par *par)
{
if (par->fbc)
info->fix.smem_len);
}
-static int __devinit cg6_probe(struct of_device *op,
+static int __devinit cg6_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
return err;
}
-static int __devexit cg6_remove(struct of_device *op)
+static int __devexit cg6_remove(struct platform_device *op)
{
struct fb_info *info = dev_get_drvdata(&op->dev);
struct cg6_par *par = info->par;
/*
* Accelerated handlers.
*/
-static inline void update_attr(u8 *dst, u8 *src, int attribute,
+static void update_attr(u8 *dst, u8 *src, int attribute,
struct vc_data *vc)
{
int i, offset = (vc->vc_font.height < 10) ? 1 : 2;
struct fbcon_ops *ops = info->fbcon_par;
return (info->state != FBINFO_STATE_RUNNING ||
- vc->vc_mode != KD_TEXT || ops->graphics);
+ vc->vc_mode != KD_TEXT || ops->graphics) &&
+ !vt_force_oops_output(vc);
}
-static inline int get_color(struct vc_data *vc, struct fb_info *info,
+static int get_color(struct vc_data *vc, struct fb_info *info,
u16 c, int is_fg)
{
int depth = fb_get_color_depth(&info->var, &info->fix);
if (p->userfont)
charcnt = FNTCHARCNT(p->fontdata);
+ vc->vc_panic_force_write = !!(info->flags & FBINFO_CAN_FORCE_OUTPUT);
vc->vc_can_do_color = (fb_get_color_depth(&info->var, &info->fix)!=1);
vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800;
if (charcnt == 256) {
* Rotation 270 degrees
*/
-static inline void ccw_update_attr(u8 *dst, u8 *src, int attribute,
+static void ccw_update_attr(u8 *dst, u8 *src, int attribute,
struct vc_data *vc)
{
int i, j, offset = (vc->vc_font.height < 10) ? 1 : 2;
* Rotation 90 degrees
*/
-static inline void cw_update_attr(u8 *dst, u8 *src, int attribute,
+static void cw_update_attr(u8 *dst, u8 *src, int attribute,
struct vc_data *vc)
{
int i, j, offset = (vc->vc_font.height < 10) ? 1 : 2;
* Rotation 180 degrees
*/
-static inline void ud_update_attr(u8 *dst, u8 *src, int attribute,
+static void ud_update_attr(u8 *dst, u8 *src, int attribute,
struct vc_data *vc)
{
int i, offset = (vc->vc_font.height < 10) ? 1 : 2;
charmap += 4 * cmapsz;
#endif
- unlock_kernel();
spin_lock_irq(&vga_lock);
/* First, the Sequencer */
vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x1);
vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0);
}
spin_unlock_irq(&vga_lock);
- lock_kernel();
return 0;
}
#include <video/vga.h>
-static struct fb_var_screeninfo efifb_defined __initdata = {
+static struct fb_var_screeninfo efifb_defined __devinitdata = {
.activate = FB_ACTIVATE_NOW,
.height = -1,
.width = -1,
.vmode = FB_VMODE_NONINTERLACED,
};
-static struct fb_fix_screeninfo efifb_fix __initdata = {
+static struct fb_fix_screeninfo efifb_fix __devinitdata = {
.id = "EFI VGA",
.type = FB_TYPE_PACKED_PIXELS,
.accel = FB_ACCEL_NONE,
int stride;
int width;
int height;
-} dmi_list[] = {
+} dmi_list[] __initdata = {
[M_I17] = { "i17", 0x80010000, 1472 * 4, 1440, 900 },
[M_I20] = { "i20", 0x80010000, 1728 * 4, 1680, 1050 }, /* guess */
[M_I20_SR] = { "imac7", 0x40010000, 1728 * 4, 1680, 1050 },
DMI_MATCH(DMI_PRODUCT_NAME, name) }, \
&dmi_list[enumid] }
-static struct dmi_system_id __initdata dmi_system_table[] = {
+static const struct dmi_system_id dmi_system_table[] __initconst = {
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "iMac4,1", M_I17),
/* At least one of these two will be right; maybe both? */
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "iMac5,1", M_I20),
vma->vm_pgoff = off >> PAGE_SHIFT;
/* This is an IO map - tell maydump to skip this VMA */
vma->vm_flags |= VM_IO | VM_RESERVED;
+ vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
fb_pgprotect(file, vma, off);
if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
vma->vm_end - vma->vm_start, vma->vm_page_prot))
int fb_get_options(char *name, char **option)
{
char *opt, *options = NULL;
- int opt_len, retval = 0;
+ int retval = 0;
int name_len = strlen(name), i;
if (name_len && ofonly && strncmp(name, "offb", 4))
for (i = 0; i < FB_MAX; i++) {
if (video_options[i] == NULL)
continue;
- opt_len = strlen(video_options[i]);
- if (!opt_len)
+ if (!video_options[i][0])
continue;
opt = video_options[i];
if (!strncmp(name, opt, name_len) &&
info->fix.accel = FB_ACCEL_SUN_CREATOR;
}
-static int __devinit ffb_probe(struct of_device *op,
+static int __devinit ffb_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
return err;
}
-static int __devexit ffb_remove(struct of_device *op)
+static int __devexit ffb_remove(struct platform_device *op)
{
struct fb_info *info = dev_get_drvdata(&op->dev);
struct ffb_par *par = info->par;
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state)
+static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state)
{
struct fsl_diu_data *machine_data;
return 0;
}
-static int fsl_diu_resume(struct of_device *ofdev)
+static int fsl_diu_resume(struct platform_device *ofdev)
{
struct fsl_diu_data *machine_data;
return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
}
-static int __devinit fsl_diu_probe(struct of_device *ofdev,
+static int __devinit fsl_diu_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
}
-static int fsl_diu_remove(struct of_device *ofdev)
+static int fsl_diu_remove(struct platform_device *ofdev)
{
struct fsl_diu_data *machine_data;
int i;
return 1;
}
-int __init igafb_init(void)
+static int __init igafb_init(void)
{
struct fb_info *info;
struct pci_dev *pdev;
iounmap(info->screen_base);
kfree(par->mmap_map);
kfree(info);
+ return -ENODEV;
}
#ifdef CONFIG_SPARC
return 0;
}
-int __init igafb_setup(char *options)
+static int __init igafb_setup(char *options)
{
char *this_opt;
*/
#define DEBUG_VAR 1
+#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
+ (defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) && \
+ defined(CONFIG_FB_IMX_MODULE))
+#define PWMR_BACKLIGHT_AVAILABLE
+#endif
+
#define DRIVER_NAME "imx-fb"
#define LCDC_SSA 0x00
struct imx_fb_videomode *mode;
int num_modes;
+#ifdef PWMR_BACKLIGHT_AVAILABLE
struct backlight_device *bl;
+#endif
void (*lcd_power)(int);
void (*backlight_power)(int);
return 0;
}
-
-
+#ifdef PWMR_BACKLIGHT_AVAILABLE
static int imxfb_bl_get_brightness(struct backlight_device *bl)
{
struct imxfb_info *fbi = bl_get_data(bl);
if (fbi->bl)
backlight_device_unregister(fbi->bl);
}
+#endif
static void imxfb_enable_controller(struct imxfb_info *fbi)
{
fbi->regs + LCDC_SIZE);
writel(fbi->pcr, fbi->regs + LCDC_PCR);
+#ifndef PWMR_BACKLIGHT_AVAILABLE
+ writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+#endif
writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
imxfb_enable_controller(fbi);
fbi->pdev = pdev;
+#ifdef PWMR_BACKLIGHT_AVAILABLE
imxfb_init_backlight(fbi);
+#endif
return 0;
imxfb_disable_controller(fbi);
+#ifdef PWMR_BACKLIGHT_AVAILABLE
imxfb_exit_backlight(fbi);
+#endif
unregister_framebuffer(info);
pdata = pdev->dev.platform_data;
var->transp.length = 0;
}
-static void leo_unmap_regs(struct of_device *op, struct fb_info *info,
+static void leo_unmap_regs(struct platform_device *op, struct fb_info *info,
struct leo_par *par)
{
if (par->lc_ss0_usr)
of_iounmap(&op->resource[0], info->screen_base, 0x800000);
}
-static int __devinit leo_probe(struct of_device *op,
+static int __devinit leo_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
return err;
}
-static int __devexit leo_remove(struct of_device *op)
+static int __devexit leo_remove(struct platform_device *op)
{
struct fb_info *info = dev_get_drvdata(&op->dev);
struct leo_par *par = info->par;
};
i2c_new_probed_device(&m2info->maven.adapter,
- &maven_info, addr_list);
+ &maven_info, addr_list, NULL);
}
}
return m2info;
return 0;
}
-static int __devinit of_platform_mb862xx_probe(struct of_device *ofdev,
+static int __devinit of_platform_mb862xx_probe(struct platform_device *ofdev,
const struct of_device_id *id)
{
struct device_node *np = ofdev->dev.of_node;
return ret;
}
-static int __devexit of_platform_mb862xx_remove(struct of_device *ofdev)
+static int __devexit of_platform_mb862xx_remove(struct platform_device *ofdev)
{
struct fb_info *fbi = dev_get_drvdata(&ofdev->dev);
struct mb862xxfb_par *par = fbi->par;
static void mddi_handle_rev_data_avail(struct mddi_info *mddi)
{
- union mddi_rev *rev = mddi->rev_data;
uint32_t rev_data_count;
uint32_t rev_crc_err_count;
- int i;
struct reg_read_info *ri;
size_t prev_offset;
uint16_t length;
return 0;
}
-static int __init mddi_probe(struct platform_device *pdev)
+static int __devinit mddi_probe(struct platform_device *pdev)
{
struct msm_mddi_platform_data *pdata = pdev->dev.platform_data;
struct mddi_info *mddi = &mddi_info[pdev->id];
{
int put_needed, ret = 0;
struct file *file;
- unsigned long vstart;
file = fget_light(img->memory_id, &put_needed);
if (file == NULL)
info->fix.accel = FB_ACCEL_SUN_CGTHREE;
}
-static int __devinit p9100_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit p9100_probe(struct platform_device *op, const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
struct fb_info *info;
return err;
}
-static int __devexit p9100_remove(struct of_device *op)
+static int __devexit p9100_remove(struct platform_device *op)
{
struct fb_info *info = dev_get_drvdata(&op->dev);
struct p9100_par *par = info->par;
#define invalidate_cache(addr)
#endif
-static int __devinit platinumfb_probe(struct of_device* odev,
+static int __devinit platinumfb_probe(struct platform_device* odev,
const struct of_device_id *match)
{
struct device_node *dp = odev->dev.of_node;
return rc;
}
-static int __devexit platinumfb_remove(struct of_device* odev)
+static int __devexit platinumfb_remove(struct platform_device* odev)
{
struct fb_info *info = dev_get_drvdata(&odev->dev);
struct fb_info_platinum *pinfo = info->par;
/* linux/drivers/video/s3c-fb.c
*
* Copyright 2008 Openmoko Inc.
- * Copyright 2008 Simtec Electronics
+ * Copyright 2008-2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * published by the Free Software FoundatIon.
*/
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/fb.h>
#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/interrupt.h>
#include <mach/map.h>
-#include <mach/regs-fb.h>
+#include <plat/regs-fb-v4.h>
#include <plat/fb.h>
/* This driver will export a number of framebuffer interfaces depending
* output timings and as the control for the output power-down state.
*/
-/* note, some of the functions that get called are derived from including
- * <mach/regs-fb.h> as they are specific to the architecture that the code
- * is being built for.
+/* note, the previous use of <mach/regs-fb.h> to get platform specific data
+ * has been replaced by using the platform device name to pick the correct
+ * configuration data for the system.
*/
#ifdef CONFIG_FB_S3C_DEBUG_REGWRITE
__raw_writel(v, r); } while(0)
#endif /* FB_S3C_DEBUG_REGWRITE */
+/* irq_flags bits */
+#define S3C_FB_VSYNC_IRQ_EN 0
+
+#define VSYNC_TIMEOUT_MSEC 50
+
struct s3c_fb;
+#define VALID_BPP(x) (1 << ((x) - 1))
+
+#define OSD_BASE(win, variant) ((variant).osd + ((win) * (variant).osd_stride))
+#define VIDOSD_A(win, variant) (OSD_BASE(win, variant) + 0x00)
+#define VIDOSD_B(win, variant) (OSD_BASE(win, variant) + 0x04)
+#define VIDOSD_C(win, variant) (OSD_BASE(win, variant) + 0x08)
+#define VIDOSD_D(win, variant) (OSD_BASE(win, variant) + 0x0C)
+
+/**
+ * struct s3c_fb_variant - fb variant information
+ * @is_2443: Set if S3C2443/S3C2416 style hardware.
+ * @nr_windows: The number of windows.
+ * @vidtcon: The base for the VIDTCONx registers
+ * @wincon: The base for the WINxCON registers.
+ * @winmap: The base for the WINxMAP registers.
+ * @keycon: The abse for the WxKEYCON registers.
+ * @buf_start: Offset of buffer start registers.
+ * @buf_size: Offset of buffer size registers.
+ * @buf_end: Offset of buffer end registers.
+ * @osd: The base for the OSD registers.
+ * @palette: Address of palette memory, or 0 if none.
+ * @has_prtcon: Set if has PRTCON register.
+ * @has_shadowcon: Set if has SHADOWCON register.
+ */
+struct s3c_fb_variant {
+ unsigned int is_2443:1;
+ unsigned short nr_windows;
+ unsigned short vidtcon;
+ unsigned short wincon;
+ unsigned short winmap;
+ unsigned short keycon;
+ unsigned short buf_start;
+ unsigned short buf_end;
+ unsigned short buf_size;
+ unsigned short osd;
+ unsigned short osd_stride;
+ unsigned short palette[S3C_FB_MAX_WIN];
+
+ unsigned int has_prtcon:1;
+ unsigned int has_shadowcon:1;
+};
+
+/**
+ * struct s3c_fb_win_variant
+ * @has_osd_c: Set if has OSD C register.
+ * @has_osd_d: Set if has OSD D register.
+ * @has_osd_alpha: Set if can change alpha transparency for a window.
+ * @palette_sz: Size of palette in entries.
+ * @palette_16bpp: Set if palette is 16bits wide.
+ * @osd_size_off: If != 0, supports setting up OSD for a window; the appropriate
+ * register is located at the given offset from OSD_BASE.
+ * @valid_bpp: 1 bit per BPP setting to show valid bits-per-pixel.
+ *
+ * valid_bpp bit x is set if (x+1)BPP is supported.
+ */
+struct s3c_fb_win_variant {
+ unsigned int has_osd_c:1;
+ unsigned int has_osd_d:1;
+ unsigned int has_osd_alpha:1;
+ unsigned int palette_16bpp:1;
+ unsigned short osd_size_off;
+ unsigned short palette_sz;
+ u32 valid_bpp;
+};
+
+/**
+ * struct s3c_fb_driverdata - per-device type driver data for init time.
+ * @variant: The variant information for this driver.
+ * @win: The window information for each window.
+ */
+struct s3c_fb_driverdata {
+ struct s3c_fb_variant variant;
+ struct s3c_fb_win_variant *win[S3C_FB_MAX_WIN];
+};
+
+/**
+ * struct s3c_fb_palette - palette information
+ * @r: Red bitfield.
+ * @g: Green bitfield.
+ * @b: Blue bitfield.
+ * @a: Alpha bitfield.
+ */
+struct s3c_fb_palette {
+ struct fb_bitfield r;
+ struct fb_bitfield g;
+ struct fb_bitfield b;
+ struct fb_bitfield a;
+};
+
/**
* struct s3c_fb_win - per window private data for each framebuffer.
* @windata: The platform data supplied for the window configuration.
* @parent: The hardware that this window is part of.
* @fbinfo: Pointer pack to the framebuffer info for this window.
+ * @varint: The variant information for this window.
* @palette_buffer: Buffer/cache to hold palette entries.
* @pseudo_palette: For use in TRUECOLOUR modes for entries 0..15/
* @index: The window number of this window.
struct s3c_fb *parent;
struct fb_info *fbinfo;
struct s3c_fb_palette palette;
+ struct s3c_fb_win_variant variant;
u32 *palette_buffer;
u32 pseudo_palette[16];
unsigned int index;
};
+/**
+ * struct s3c_fb_vsync - vsync information
+ * @wait: a queue for processes waiting for vsync
+ * @count: vsync interrupt count
+ */
+struct s3c_fb_vsync {
+ wait_queue_head_t wait;
+ unsigned int count;
+};
+
/**
* struct s3c_fb - overall hardware state of the hardware
* @dev: The device that we bound to, for printing, etc.
* @regs_res: The resource we claimed for the IO registers.
* @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
* @regs: The mapped hardware registers.
+ * @variant: Variant information for this hardware.
* @enabled: A bitmask of enabled hardware windows.
* @pdata: The platform configuration data passed with the device.
* @windows: The hardware windows that have been claimed.
+ * @irq_no: IRQ line number
+ * @irq_flags: irq flags
+ * @vsync_info: VSYNC-related information (count, queues...)
*/
struct s3c_fb {
struct device *dev;
struct resource *regs_res;
struct clk *bus_clk;
void __iomem *regs;
+ struct s3c_fb_variant variant;
unsigned char enabled;
struct s3c_fb_platdata *pdata;
struct s3c_fb_win *windows[S3C_FB_MAX_WIN];
+
+ int irq_no;
+ unsigned long irq_flags;
+ struct s3c_fb_vsync vsync_info;
};
/**
- * s3c_fb_win_has_palette() - determine if a mode has a palette
- * @win: The window number being queried.
- * @bpp: The number of bits per pixel to test.
- *
- * Work out if the given window supports palletised data at the specified bpp.
+ * s3c_fb_validate_win_bpp - validate the bits-per-pixel for this mode.
+ * @win: The device window.
+ * @bpp: The bit depth.
*/
-static int s3c_fb_win_has_palette(unsigned int win, unsigned int bpp)
+static bool s3c_fb_validate_win_bpp(struct s3c_fb_win *win, unsigned int bpp)
{
- return s3c_fb_win_pal_size(win) <= (1 << bpp);
+ return win->variant.valid_bpp & VALID_BPP(bpp);
}
/**
var->xres_virtual = max((unsigned int)windata->virtual_x, var->xres);
var->yres_virtual = max((unsigned int)windata->virtual_y, var->yres);
- if (!s3c_fb_validate_win_bpp(win->index, var->bits_per_pixel)) {
+ if (!s3c_fb_validate_win_bpp(win, var->bits_per_pixel)) {
dev_dbg(sfb->dev, "win %d: unsupported bpp %d\n",
win->index, var->bits_per_pixel);
return -EINVAL;
case 2:
case 4:
case 8:
- if (!s3c_fb_win_has_palette(win->index, var->bits_per_pixel)) {
+ if (sfb->variant.palette[win->index] != 0) {
/* non palletised, A:1,R:2,G:3,B:2 mode */
var->red.offset = 4;
var->green.offset = 2;
return ALIGN(pix, pix_per_word);
}
+/**
+ * vidosd_set_size() - set OSD size for a window
+ *
+ * @win: the window to set OSD size for
+ * @size: OSD size register value
+ */
+static void vidosd_set_size(struct s3c_fb_win *win, u32 size)
+{
+ struct s3c_fb *sfb = win->parent;
+
+ /* OSD can be set up if osd_size_off != 0 for this window */
+ if (win->variant.osd_size_off)
+ writel(size, sfb->regs + OSD_BASE(win->index, sfb->variant)
+ + win->variant.osd_size_off);
+}
+
+/**
+ * vidosd_set_alpha() - set alpha transparency for a window
+ *
+ * @win: the window to set OSD size for
+ * @alpha: alpha register value
+ */
+static void vidosd_set_alpha(struct s3c_fb_win *win, u32 alpha)
+{
+ struct s3c_fb *sfb = win->parent;
+
+ if (win->variant.has_osd_alpha)
+ writel(alpha, sfb->regs + VIDOSD_C(win->index, sfb->variant));
+}
+
+/**
+ * shadow_protect_win() - disable updating values from shadow registers at vsync
+ *
+ * @win: window to protect registers for
+ * @protect: 1 to protect (disable updates)
+ */
+static void shadow_protect_win(struct s3c_fb_win *win, bool protect)
+{
+ struct s3c_fb *sfb = win->parent;
+ u32 reg;
+
+ if (protect) {
+ if (sfb->variant.has_prtcon) {
+ writel(PRTCON_PROTECT, sfb->regs + PRTCON);
+ } else if (sfb->variant.has_shadowcon) {
+ reg = readl(sfb->regs + SHADOWCON);
+ writel(reg | SHADOWCON_WINx_PROTECT(win->index),
+ sfb->regs + SHADOWCON);
+ }
+ } else {
+ if (sfb->variant.has_prtcon) {
+ writel(0, sfb->regs + PRTCON);
+ } else if (sfb->variant.has_shadowcon) {
+ reg = readl(sfb->regs + SHADOWCON);
+ writel(reg & ~SHADOWCON_WINx_PROTECT(win->index),
+ sfb->regs + SHADOWCON);
+ }
+ }
+}
+
/**
* s3c_fb_set_par() - framebuffer request to set new framebuffer state.
* @info: The framebuffer to change.
struct s3c_fb_win *win = info->par;
struct s3c_fb *sfb = win->parent;
void __iomem *regs = sfb->regs;
+ void __iomem *buf = regs;
int win_no = win->index;
- u32 osdc_data = 0;
+ u32 alpha = 0;
u32 data;
u32 pagewidth;
int clkdiv;
dev_dbg(sfb->dev, "setting framebuffer parameters\n");
+ shadow_protect_win(win, 1);
+
switch (var->bits_per_pixel) {
case 32:
case 24:
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 8:
- if (s3c_fb_win_has_palette(win_no, 8))
+ if (win->variant.palette_sz >= 256)
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
else
info->fix.visual = FB_VISUAL_TRUECOLOR;
info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
+ info->fix.xpanstep = info->var.xres_virtual > info->var.xres ? 1 : 0;
+ info->fix.ypanstep = info->var.yres_virtual > info->var.yres ? 1 : 0;
+
/* disable the window whilst we update it */
writel(0, regs + WINCON(win_no));
- /* use window 0 as the basis for the lcd output timings */
+ /* use platform specified window as the basis for the lcd timings */
- if (win_no == 0) {
+ if (win_no == sfb->pdata->default_win) {
clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
data = sfb->pdata->vidcon0;
/* write the timing data to the panel */
+ if (sfb->variant.is_2443)
+ data |= (1 << 5);
+
data |= VIDCON0_ENVID | VIDCON0_ENVID_F;
writel(data, regs + VIDCON0);
VIDTCON0_VFPD(var->lower_margin - 1) |
VIDTCON0_VSPW(var->vsync_len - 1);
- writel(data, regs + VIDTCON0);
+ writel(data, regs + sfb->variant.vidtcon);
data = VIDTCON1_HBPD(var->left_margin - 1) |
VIDTCON1_HFPD(var->right_margin - 1) |
VIDTCON1_HSPW(var->hsync_len - 1);
- writel(data, regs + VIDTCON1);
+ /* VIDTCON1 */
+ writel(data, regs + sfb->variant.vidtcon + 4);
data = VIDTCON2_LINEVAL(var->yres - 1) |
VIDTCON2_HOZVAL(var->xres - 1);
- writel(data, regs + VIDTCON2);
+ writel(data, regs +sfb->variant.vidtcon + 8 );
}
/* write the buffer address */
- writel(info->fix.smem_start, regs + VIDW_BUF_START(win_no));
+ /* start and end registers stride is 8 */
+ buf = regs + win_no * 8;
+
+ writel(info->fix.smem_start, buf + sfb->variant.buf_start);
data = info->fix.smem_start + info->fix.line_length * var->yres;
- writel(data, regs + VIDW_BUF_END(win_no));
+ writel(data, buf + sfb->variant.buf_end);
pagewidth = (var->xres * var->bits_per_pixel) >> 3;
data = VIDW_BUF_SIZE_OFFSET(info->fix.line_length - pagewidth) |
VIDW_BUF_SIZE_PAGEWIDTH(pagewidth);
- writel(data, regs + VIDW_BUF_SIZE(win_no));
+ writel(data, regs + sfb->variant.buf_size + (win_no * 4));
/* write 'OSD' registers to control position of framebuffer */
data = VIDOSDxA_TOPLEFT_X(0) | VIDOSDxA_TOPLEFT_Y(0);
- writel(data, regs + VIDOSD_A(win_no));
+ writel(data, regs + VIDOSD_A(win_no, sfb->variant));
data = VIDOSDxB_BOTRIGHT_X(s3c_fb_align_word(var->bits_per_pixel,
var->xres - 1)) |
VIDOSDxB_BOTRIGHT_Y(var->yres - 1);
- writel(data, regs + VIDOSD_B(win_no));
+ writel(data, regs + VIDOSD_B(win_no, sfb->variant));
data = var->xres * var->yres;
- osdc_data = VIDISD14C_ALPHA1_R(0xf) |
+ alpha = VIDISD14C_ALPHA1_R(0xf) |
VIDISD14C_ALPHA1_G(0xf) |
VIDISD14C_ALPHA1_B(0xf);
- if (s3c_fb_has_osd_d(win_no)) {
- writel(data, regs + VIDOSD_D(win_no));
- writel(osdc_data, regs + VIDOSD_C(win_no));
- } else
- writel(data, regs + VIDOSD_C(win_no));
+ vidosd_set_alpha(win, alpha);
+ vidosd_set_size(win, data);
data = WINCONx_ENWIN;
else
data |= WINCON0_BPPMODE_24BPP_888;
+ data |= WINCONx_WSWP;
data |= WINCONx_BURSTLEN_16WORD;
break;
}
- /* It has no color key control register for window0 */
+ /* Enable the colour keying for the window below this one */
if (win_no > 0) {
u32 keycon0_data = 0, keycon1_data = 0;
+ void __iomem *keycon = regs + sfb->variant.keycon;
keycon0_data = ~(WxKEYCON0_KEYBL_EN |
WxKEYCON0_KEYEN_F |
keycon1_data = WxKEYCON1_COLVAL(0xffffff);
- writel(keycon0_data, regs + WxKEYCONy(win_no-1, 0));
- writel(keycon1_data, regs + WxKEYCONy(win_no-1, 1));
+ keycon += (win_no - 1) * 8;
+
+ writel(keycon0_data, keycon + WKEYCON0);
+ writel(keycon1_data, keycon + WKEYCON1);
+ }
+
+ writel(data, regs + sfb->variant.wincon + (win_no * 4));
+ writel(0x0, regs + sfb->variant.winmap + (win_no * 4));
+
+ /* Enable DMA channel for this window */
+ if (sfb->variant.has_shadowcon) {
+ data = readl(sfb->regs + SHADOWCON);
+ data |= SHADOWCON_CHx_ENABLE(win_no);
+ writel(data, sfb->regs + SHADOWCON);
}
- writel(data, regs + WINCON(win_no));
- writel(0x0, regs + WINxMAP(win_no));
+ shadow_protect_win(win, 0);
return 0;
}
void __iomem *palreg;
u32 palcon;
- palreg = sfb->regs + s3c_fb_pal_reg(win->index, reg);
+ palreg = sfb->regs + sfb->variant.palette[win->index];
dev_dbg(sfb->dev, "%s: win %d, reg %d (%p): %08x\n",
__func__, win->index, reg, palreg, value);
palcon = readl(sfb->regs + WPALCON);
writel(palcon | WPALCON_PAL_UPDATE, sfb->regs + WPALCON);
- if (s3c_fb_pal_is16(win->index))
- writew(value, palreg);
+ if (win->variant.palette_16bpp)
+ writew(value, palreg + (reg * 2));
else
- writel(value, palreg);
+ writel(value, palreg + (reg * 4));
writel(palcon, sfb->regs + WPALCON);
}
break;
case FB_VISUAL_PSEUDOCOLOR:
- if (regno < s3c_fb_win_pal_size(win->index)) {
+ if (regno < win->variant.palette_sz) {
val = chan_to_field(red, &win->palette.r);
val |= chan_to_field(green, &win->palette.g);
val |= chan_to_field(blue, &win->palette.b);
dev_dbg(sfb->dev, "blank mode %d\n", blank_mode);
- wincon = readl(sfb->regs + WINCON(index));
+ wincon = readl(sfb->regs + sfb->variant.wincon + (index * 4));
switch (blank_mode) {
case FB_BLANK_POWERDOWN:
case FB_BLANK_NORMAL:
/* disable the DMA and display 0x0 (black) */
writel(WINxMAP_MAP | WINxMAP_MAP_COLOUR(0x0),
- sfb->regs + WINxMAP(index));
+ sfb->regs + sfb->variant.winmap + (index * 4));
break;
case FB_BLANK_UNBLANK:
- writel(0x0, sfb->regs + WINxMAP(index));
+ writel(0x0, sfb->regs + sfb->variant.winmap + (index * 4));
wincon |= WINCONx_ENWIN;
sfb->enabled |= (1 << index);
break;
return 1;
}
- writel(wincon, sfb->regs + WINCON(index));
+ writel(wincon, sfb->regs + sfb->variant.wincon + (index * 4));
/* Check the enabled state to see if we need to be running the
* main LCD interface, as if there are no active windows then
/* we're stuck with this until we can do something about overriding
* the power control using the blanking event for a single fb.
*/
- if (index == 0)
+ if (index == sfb->pdata->default_win)
s3c_fb_enable(sfb, blank_mode != FB_BLANK_POWERDOWN ? 1 : 0);
return 0;
}
+/**
+ * s3c_fb_pan_display() - Pan the display.
+ *
+ * Note that the offsets can be written to the device at any time, as their
+ * values are latched at each vsync automatically. This also means that only
+ * the last call to this function will have any effect on next vsync, but
+ * there is no need to sleep waiting for it to prevent tearing.
+ *
+ * @var: The screen information to verify.
+ * @info: The framebuffer device.
+ */
+static int s3c_fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct s3c_fb_win *win = info->par;
+ struct s3c_fb *sfb = win->parent;
+ void __iomem *buf = sfb->regs + win->index * 8;
+ unsigned int start_boff, end_boff;
+
+ /* Offset in bytes to the start of the displayed area */
+ start_boff = var->yoffset * info->fix.line_length;
+ /* X offset depends on the current bpp */
+ if (info->var.bits_per_pixel >= 8) {
+ start_boff += var->xoffset * (info->var.bits_per_pixel >> 3);
+ } else {
+ switch (info->var.bits_per_pixel) {
+ case 4:
+ start_boff += var->xoffset >> 1;
+ break;
+ case 2:
+ start_boff += var->xoffset >> 2;
+ break;
+ case 1:
+ start_boff += var->xoffset >> 3;
+ break;
+ default:
+ dev_err(sfb->dev, "invalid bpp\n");
+ return -EINVAL;
+ }
+ }
+ /* Offset in bytes to the end of the displayed area */
+ end_boff = start_boff + var->yres * info->fix.line_length;
+
+ /* Temporarily turn off per-vsync update from shadow registers until
+ * both start and end addresses are updated to prevent corruption */
+ shadow_protect_win(win, 1);
+
+ writel(info->fix.smem_start + start_boff, buf + sfb->variant.buf_start);
+ writel(info->fix.smem_start + end_boff, buf + sfb->variant.buf_end);
+
+ shadow_protect_win(win, 0);
+
+ return 0;
+}
+
+/**
+ * s3c_fb_enable_irq() - enable framebuffer interrupts
+ * @sfb: main hardware state
+ */
+static void s3c_fb_enable_irq(struct s3c_fb *sfb)
+{
+ void __iomem *regs = sfb->regs;
+ u32 irq_ctrl_reg;
+
+ if (!test_and_set_bit(S3C_FB_VSYNC_IRQ_EN, &sfb->irq_flags)) {
+ /* IRQ disabled, enable it */
+ irq_ctrl_reg = readl(regs + VIDINTCON0);
+
+ irq_ctrl_reg |= VIDINTCON0_INT_ENABLE;
+ irq_ctrl_reg |= VIDINTCON0_INT_FRAME;
+
+ irq_ctrl_reg &= ~VIDINTCON0_FRAMESEL0_MASK;
+ irq_ctrl_reg |= VIDINTCON0_FRAMESEL0_VSYNC;
+ irq_ctrl_reg &= ~VIDINTCON0_FRAMESEL1_MASK;
+ irq_ctrl_reg |= VIDINTCON0_FRAMESEL1_NONE;
+
+ writel(irq_ctrl_reg, regs + VIDINTCON0);
+ }
+}
+
+/**
+ * s3c_fb_disable_irq() - disable framebuffer interrupts
+ * @sfb: main hardware state
+ */
+static void s3c_fb_disable_irq(struct s3c_fb *sfb)
+{
+ void __iomem *regs = sfb->regs;
+ u32 irq_ctrl_reg;
+
+ if (test_and_clear_bit(S3C_FB_VSYNC_IRQ_EN, &sfb->irq_flags)) {
+ /* IRQ enabled, disable it */
+ irq_ctrl_reg = readl(regs + VIDINTCON0);
+
+ irq_ctrl_reg &= ~VIDINTCON0_INT_FRAME;
+ irq_ctrl_reg &= ~VIDINTCON0_INT_ENABLE;
+
+ writel(irq_ctrl_reg, regs + VIDINTCON0);
+ }
+}
+
+static irqreturn_t s3c_fb_irq(int irq, void *dev_id)
+{
+ struct s3c_fb *sfb = dev_id;
+ void __iomem *regs = sfb->regs;
+ u32 irq_sts_reg;
+
+ irq_sts_reg = readl(regs + VIDINTCON1);
+
+ if (irq_sts_reg & VIDINTCON1_INT_FRAME) {
+
+ /* VSYNC interrupt, accept it */
+ writel(VIDINTCON1_INT_FRAME, regs + VIDINTCON1);
+
+ sfb->vsync_info.count++;
+ wake_up_interruptible(&sfb->vsync_info.wait);
+ }
+
+ /* We only support waiting for VSYNC for now, so it's safe
+ * to always disable irqs here.
+ */
+ s3c_fb_disable_irq(sfb);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * s3c_fb_wait_for_vsync() - sleep until next VSYNC interrupt or timeout
+ * @sfb: main hardware state
+ * @crtc: head index.
+ */
+static int s3c_fb_wait_for_vsync(struct s3c_fb *sfb, u32 crtc)
+{
+ unsigned long count;
+ int ret;
+
+ if (crtc != 0)
+ return -ENODEV;
+
+ count = sfb->vsync_info.count;
+ s3c_fb_enable_irq(sfb);
+ ret = wait_event_interruptible_timeout(sfb->vsync_info.wait,
+ count != sfb->vsync_info.count,
+ msecs_to_jiffies(VSYNC_TIMEOUT_MSEC));
+ if (ret == 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int s3c_fb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ struct s3c_fb_win *win = info->par;
+ struct s3c_fb *sfb = win->parent;
+ int ret;
+ u32 crtc;
+
+ switch (cmd) {
+ case FBIO_WAITFORVSYNC:
+ if (get_user(crtc, (u32 __user *)arg)) {
+ ret = -EFAULT;
+ break;
+ }
+
+ ret = s3c_fb_wait_for_vsync(sfb, crtc);
+ break;
+ default:
+ ret = -ENOTTY;
+ }
+
+ return ret;
+}
+
static struct fb_ops s3c_fb_ops = {
.owner = THIS_MODULE,
.fb_check_var = s3c_fb_check_var,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
+ .fb_pan_display = s3c_fb_pan_display,
+ .fb_ioctl = s3c_fb_ioctl,
};
+/**
+ * s3c_fb_missing_pixclock() - calculates pixel clock
+ * @mode: The video mode to change.
+ *
+ * Calculate the pixel clock when none has been given through platform data.
+ */
+static void __devinit s3c_fb_missing_pixclock(struct fb_videomode *mode)
+{
+ u64 pixclk = 1000000000000ULL;
+ u32 div;
+
+ div = mode->left_margin + mode->hsync_len + mode->right_margin +
+ mode->xres;
+ div *= mode->upper_margin + mode->vsync_len + mode->lower_margin +
+ mode->yres;
+ div *= mode->refresh ? : 60;
+
+ do_div(pixclk, div);
+
+ mode->pixclock = pixclk;
+}
+
/**
* s3c_fb_alloc_memory() - allocate display memory for framebuffer window
* @sfb: The base resources for the hardware.
{
struct fb_info *fbi = win->fbinfo;
- dma_free_writecombine(sfb->dev, PAGE_ALIGN(fbi->fix.smem_len),
+ if (fbi->screen_base)
+ dma_free_writecombine(sfb->dev, PAGE_ALIGN(fbi->fix.smem_len),
fbi->screen_base, fbi->fix.smem_start);
}
*/
static void s3c_fb_release_win(struct s3c_fb *sfb, struct s3c_fb_win *win)
{
+ u32 data;
+
if (win->fbinfo) {
+ if (sfb->variant.has_shadowcon) {
+ data = readl(sfb->regs + SHADOWCON);
+ data &= ~SHADOWCON_CHx_ENABLE(win->index);
+ data &= ~SHADOWCON_CHx_LOCAL_ENABLE(win->index);
+ writel(data, sfb->regs + SHADOWCON);
+ }
unregister_framebuffer(win->fbinfo);
- fb_dealloc_cmap(&win->fbinfo->cmap);
+ if (win->fbinfo->cmap.len)
+ fb_dealloc_cmap(&win->fbinfo->cmap);
s3c_fb_free_memory(sfb, win);
framebuffer_release(win->fbinfo);
}
/**
* s3c_fb_probe_win() - register an hardware window
* @sfb: The base resources for the hardware
+ * @variant: The variant information for this window.
* @res: Pointer to where to place the resultant window.
*
* Allocate and do the basic initialisation for one of the hardware's graphics
* windows.
*/
static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no,
+ struct s3c_fb_win_variant *variant,
struct s3c_fb_win **res)
{
struct fb_var_screeninfo *var;
int palette_size;
int ret;
- dev_dbg(sfb->dev, "probing window %d\n", win_no);
+ dev_dbg(sfb->dev, "probing window %d, variant %p\n", win_no, variant);
+
+ init_waitqueue_head(&sfb->vsync_info.wait);
- palette_size = s3c_fb_win_pal_size(win_no);
+ palette_size = variant->palette_sz * 4;
fbinfo = framebuffer_alloc(sizeof(struct s3c_fb_win) +
palette_size * sizeof(u32), sfb->dev);
WARN_ON(windata->win_mode.yres == 0);
win = fbinfo->par;
+ *res = win;
var = &fbinfo->var;
+ win->variant = *variant;
win->fbinfo = fbinfo;
win->parent = sfb;
win->windata = windata;
}
/* setup the r/b/g positions for the window's palette */
- s3c_fb_init_palette(win_no, &win->palette);
+ if (win->variant.palette_16bpp) {
+ /* Set RGB 5:6:5 as default */
+ win->palette.r.offset = 11;
+ win->palette.r.length = 5;
+ win->palette.g.offset = 5;
+ win->palette.g.length = 6;
+ win->palette.b.offset = 0;
+ win->palette.b.length = 5;
+
+ } else {
+ /* Set 8bpp or 8bpp and 1bit alpha */
+ win->palette.r.offset = 16;
+ win->palette.r.length = 8;
+ win->palette.g.offset = 8;
+ win->palette.g.length = 8;
+ win->palette.b.offset = 0;
+ win->palette.b.length = 8;
+ }
/* setup the initial video mode from the window */
fb_videomode_to_var(&fbinfo->var, initmode);
/* create initial colour map */
- ret = fb_alloc_cmap(&fbinfo->cmap, s3c_fb_win_pal_size(win_no), 1);
+ ret = fb_alloc_cmap(&fbinfo->cmap, win->variant.palette_sz, 1);
if (ret == 0)
fb_set_cmap(&fbinfo->cmap, fbinfo);
else
return ret;
}
- *res = win;
dev_info(sfb->dev, "window %d: fb %s\n", win_no, fbinfo->fix.id);
return 0;
static void s3c_fb_clear_win(struct s3c_fb *sfb, int win)
{
void __iomem *regs = sfb->regs;
-
- writel(0, regs + WINCON(win));
- writel(0xffffff, regs + WxKEYCONy(win, 0));
- writel(0xffffff, regs + WxKEYCONy(win, 1));
-
- writel(0, regs + VIDOSD_A(win));
- writel(0, regs + VIDOSD_B(win));
- writel(0, regs + VIDOSD_C(win));
+ u32 reg;
+
+ writel(0, regs + sfb->variant.wincon + (win * 4));
+ writel(0, regs + VIDOSD_A(win, sfb->variant));
+ writel(0, regs + VIDOSD_B(win, sfb->variant));
+ writel(0, regs + VIDOSD_C(win, sfb->variant));
+ reg = readl(regs + SHADOWCON);
+ writel(reg & ~SHADOWCON_WINx_PROTECT(win), regs + SHADOWCON);
}
static int __devinit s3c_fb_probe(struct platform_device *pdev)
{
+ struct s3c_fb_driverdata *fbdrv;
struct device *dev = &pdev->dev;
struct s3c_fb_platdata *pd;
struct s3c_fb *sfb;
int win;
int ret = 0;
+ fbdrv = (struct s3c_fb_driverdata *)platform_get_device_id(pdev)->driver_data;
+
+ if (fbdrv->variant.nr_windows > S3C_FB_MAX_WIN) {
+ dev_err(dev, "too many windows, cannot attach\n");
+ return -EINVAL;
+ }
+
pd = pdev->dev.platform_data;
if (!pd) {
dev_err(dev, "no platform data specified\n");
return -ENOMEM;
}
+ dev_dbg(dev, "allocate new framebuffer %p\n", sfb);
+
sfb->dev = dev;
sfb->pdata = pd;
+ sfb->variant = fbdrv->variant;
sfb->bus_clk = clk_get(dev, "lcd");
if (IS_ERR(sfb->bus_clk)) {
goto err_req_region;
}
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "failed to acquire irq resource\n");
+ ret = -ENOENT;
+ goto err_ioremap;
+ }
+ sfb->irq_no = res->start;
+ ret = request_irq(sfb->irq_no, s3c_fb_irq,
+ 0, "s3c_fb", sfb);
+ if (ret) {
+ dev_err(dev, "irq request failed\n");
+ goto err_ioremap;
+ }
+
dev_dbg(dev, "got resources (regs %p), probing windows\n", sfb->regs);
/* setup gpio and output polarity controls */
/* zero all windows before we do anything */
- for (win = 0; win < S3C_FB_MAX_WIN; win++)
+ for (win = 0; win < fbdrv->variant.nr_windows; win++)
s3c_fb_clear_win(sfb, win);
+ /* initialise colour key controls */
+ for (win = 0; win < (fbdrv->variant.nr_windows - 1); win++) {
+ void __iomem *regs = sfb->regs + sfb->variant.keycon;
+
+ regs += (win * 8);
+ writel(0xffffff, regs + WKEYCON0);
+ writel(0xffffff, regs + WKEYCON1);
+ }
+
/* we have the register setup, start allocating framebuffers */
- for (win = 0; win < S3C_FB_MAX_WIN; win++) {
+ for (win = 0; win < fbdrv->variant.nr_windows; win++) {
if (!pd->win[win])
continue;
- ret = s3c_fb_probe_win(sfb, win, &sfb->windows[win]);
+ if (!pd->win[win]->win_mode.pixclock)
+ s3c_fb_missing_pixclock(&pd->win[win]->win_mode);
+
+ ret = s3c_fb_probe_win(sfb, win, fbdrv->win[win],
+ &sfb->windows[win]);
if (ret < 0) {
dev_err(dev, "failed to create window %d\n", win);
for (; win >= 0; win--)
s3c_fb_release_win(sfb, sfb->windows[win]);
- goto err_ioremap;
+ goto err_irq;
}
}
return 0;
+err_irq:
+ free_irq(sfb->irq_no, sfb);
+
err_ioremap:
iounmap(sfb->regs);
if (sfb->windows[win])
s3c_fb_release_win(sfb, sfb->windows[win]);
+ free_irq(sfb->irq_no, sfb);
+
iounmap(sfb->regs);
clk_disable(sfb->bus_clk);
writel(pd->vidcon1, sfb->regs + VIDCON1);
/* zero all windows before we do anything */
- for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++)
+ for (win_no = 0; win_no < sfb->variant.nr_windows; win_no++)
s3c_fb_clear_win(sfb, win_no);
+ for (win_no = 0; win_no < sfb->variant.nr_windows - 1; win_no++) {
+ void __iomem *regs = sfb->regs + sfb->variant.keycon;
+
+ regs += (win_no * 8);
+ writel(0xffffff, regs + WKEYCON0);
+ writel(0xffffff, regs + WKEYCON1);
+ }
+
/* restore framebuffers */
for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
win = sfb->windows[win_no];
#define s3c_fb_resume NULL
#endif
+
+#define VALID_BPP124 (VALID_BPP(1) | VALID_BPP(2) | VALID_BPP(4))
+#define VALID_BPP1248 (VALID_BPP124 | VALID_BPP(8))
+
+static struct s3c_fb_win_variant s3c_fb_data_64xx_wins[] = {
+ [0] = {
+ .has_osd_c = 1,
+ .osd_size_off = 0x8,
+ .palette_sz = 256,
+ .valid_bpp = VALID_BPP1248 | VALID_BPP(16) | VALID_BPP(24),
+ },
+ [1] = {
+ .has_osd_c = 1,
+ .has_osd_d = 1,
+ .osd_size_off = 0x12,
+ .has_osd_alpha = 1,
+ .palette_sz = 256,
+ .valid_bpp = (VALID_BPP1248 | VALID_BPP(16) |
+ VALID_BPP(18) | VALID_BPP(19) |
+ VALID_BPP(24) | VALID_BPP(25)),
+ },
+ [2] = {
+ .has_osd_c = 1,
+ .has_osd_d = 1,
+ .osd_size_off = 0x12,
+ .has_osd_alpha = 1,
+ .palette_sz = 16,
+ .palette_16bpp = 1,
+ .valid_bpp = (VALID_BPP1248 | VALID_BPP(16) |
+ VALID_BPP(18) | VALID_BPP(19) |
+ VALID_BPP(24) | VALID_BPP(25)),
+ },
+ [3] = {
+ .has_osd_c = 1,
+ .has_osd_alpha = 1,
+ .palette_sz = 16,
+ .palette_16bpp = 1,
+ .valid_bpp = (VALID_BPP124 | VALID_BPP(16) |
+ VALID_BPP(18) | VALID_BPP(19) |
+ VALID_BPP(24) | VALID_BPP(25)),
+ },
+ [4] = {
+ .has_osd_c = 1,
+ .has_osd_alpha = 1,
+ .palette_sz = 4,
+ .palette_16bpp = 1,
+ .valid_bpp = (VALID_BPP(1) | VALID_BPP(2) |
+ VALID_BPP(16) | VALID_BPP(18) |
+ VALID_BPP(24) | VALID_BPP(25)),
+ },
+};
+
+static struct s3c_fb_driverdata s3c_fb_data_64xx = {
+ .variant = {
+ .nr_windows = 5,
+ .vidtcon = VIDTCON0,
+ .wincon = WINCON(0),
+ .winmap = WINxMAP(0),
+ .keycon = WKEYCON,
+ .osd = VIDOSD_BASE,
+ .osd_stride = 16,
+ .buf_start = VIDW_BUF_START(0),
+ .buf_size = VIDW_BUF_SIZE(0),
+ .buf_end = VIDW_BUF_END(0),
+
+ .palette = {
+ [0] = 0x400,
+ [1] = 0x800,
+ [2] = 0x300,
+ [3] = 0x320,
+ [4] = 0x340,
+ },
+
+ .has_prtcon = 1,
+ },
+ .win[0] = &s3c_fb_data_64xx_wins[0],
+ .win[1] = &s3c_fb_data_64xx_wins[1],
+ .win[2] = &s3c_fb_data_64xx_wins[2],
+ .win[3] = &s3c_fb_data_64xx_wins[3],
+ .win[4] = &s3c_fb_data_64xx_wins[4],
+};
+
+static struct s3c_fb_driverdata s3c_fb_data_s5pc100 = {
+ .variant = {
+ .nr_windows = 5,
+ .vidtcon = VIDTCON0,
+ .wincon = WINCON(0),
+ .winmap = WINxMAP(0),
+ .keycon = WKEYCON,
+ .osd = VIDOSD_BASE,
+ .osd_stride = 16,
+ .buf_start = VIDW_BUF_START(0),
+ .buf_size = VIDW_BUF_SIZE(0),
+ .buf_end = VIDW_BUF_END(0),
+
+ .palette = {
+ [0] = 0x2400,
+ [1] = 0x2800,
+ [2] = 0x2c00,
+ [3] = 0x3000,
+ [4] = 0x3400,
+ },
+
+ .has_prtcon = 1,
+ },
+ .win[0] = &s3c_fb_data_64xx_wins[0],
+ .win[1] = &s3c_fb_data_64xx_wins[1],
+ .win[2] = &s3c_fb_data_64xx_wins[2],
+ .win[3] = &s3c_fb_data_64xx_wins[3],
+ .win[4] = &s3c_fb_data_64xx_wins[4],
+};
+
+static struct s3c_fb_driverdata s3c_fb_data_s5pv210 = {
+ .variant = {
+ .nr_windows = 5,
+ .vidtcon = VIDTCON0,
+ .wincon = WINCON(0),
+ .winmap = WINxMAP(0),
+ .keycon = WKEYCON,
+ .osd = VIDOSD_BASE,
+ .osd_stride = 16,
+ .buf_start = VIDW_BUF_START(0),
+ .buf_size = VIDW_BUF_SIZE(0),
+ .buf_end = VIDW_BUF_END(0),
+
+ .palette = {
+ [0] = 0x2400,
+ [1] = 0x2800,
+ [2] = 0x2c00,
+ [3] = 0x3000,
+ [4] = 0x3400,
+ },
+
+ .has_shadowcon = 1,
+ },
+ .win[0] = &s3c_fb_data_64xx_wins[0],
+ .win[1] = &s3c_fb_data_64xx_wins[1],
+ .win[2] = &s3c_fb_data_64xx_wins[2],
+ .win[3] = &s3c_fb_data_64xx_wins[3],
+ .win[4] = &s3c_fb_data_64xx_wins[4],
+};
+
+/* S3C2443/S3C2416 style hardware */
+static struct s3c_fb_driverdata s3c_fb_data_s3c2443 = {
+ .variant = {
+ .nr_windows = 2,
+ .is_2443 = 1,
+
+ .vidtcon = 0x08,
+ .wincon = 0x14,
+ .winmap = 0xd0,
+ .keycon = 0xb0,
+ .osd = 0x28,
+ .osd_stride = 12,
+ .buf_start = 0x64,
+ .buf_size = 0x94,
+ .buf_end = 0x7c,
+
+ .palette = {
+ [0] = 0x400,
+ [1] = 0x800,
+ },
+ },
+ .win[0] = &(struct s3c_fb_win_variant) {
+ .palette_sz = 256,
+ .valid_bpp = VALID_BPP1248 | VALID_BPP(16) | VALID_BPP(24),
+ },
+ .win[1] = &(struct s3c_fb_win_variant) {
+ .has_osd_c = 1,
+ .has_osd_alpha = 1,
+ .palette_sz = 256,
+ .valid_bpp = (VALID_BPP1248 | VALID_BPP(16) |
+ VALID_BPP(18) | VALID_BPP(19) |
+ VALID_BPP(24) | VALID_BPP(25) |
+ VALID_BPP(28)),
+ },
+};
+
+static struct platform_device_id s3c_fb_driver_ids[] = {
+ {
+ .name = "s3c-fb",
+ .driver_data = (unsigned long)&s3c_fb_data_64xx,
+ }, {
+ .name = "s5pc100-fb",
+ .driver_data = (unsigned long)&s3c_fb_data_s5pc100,
+ }, {
+ .name = "s5pv210-fb",
+ .driver_data = (unsigned long)&s3c_fb_data_s5pv210,
+ }, {
+ .name = "s3c2443-fb",
+ .driver_data = (unsigned long)&s3c_fb_data_s3c2443,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, s3c_fb_driver_ids);
+
static struct platform_driver s3c_fb_driver = {
.probe = s3c_fb_probe,
.remove = __devexit_p(s3c_fb_remove),
.suspend = s3c_fb_suspend,
.resume = s3c_fb_resume,
+ .id_table = s3c_fb_driver_ids,
.driver = {
.name = "s3c-fb",
.owner = THIS_MODULE,
--- /dev/null
+/*
+ * Renesas SH-mobile MIPI DSI support
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <video/mipi_display.h>
+#include <video/sh_mipi_dsi.h>
+#include <video/sh_mobile_lcdc.h>
+
+#define CMTSRTCTR 0x80d0
+#define CMTSRTREQ 0x8070
+
+#define DSIINTE 0x0060
+
+/* E.g., sh7372 has 2 MIPI-DSIs - one for each LCDC */
+#define MAX_SH_MIPI_DSI 2
+
+struct sh_mipi {
+ void __iomem *base;
+ struct clk *dsit_clk;
+ struct clk *dsip_clk;
+};
+
+static struct sh_mipi *mipi_dsi[MAX_SH_MIPI_DSI];
+
+/* Protect the above array */
+static DEFINE_MUTEX(array_lock);
+
+static struct sh_mipi *sh_mipi_by_handle(int handle)
+{
+ if (handle >= ARRAY_SIZE(mipi_dsi) || handle < 0)
+ return NULL;
+
+ return mipi_dsi[handle];
+}
+
+static int sh_mipi_send_short(struct sh_mipi *mipi, u8 dsi_cmd,
+ u8 cmd, u8 param)
+{
+ u32 data = (dsi_cmd << 24) | (cmd << 16) | (param << 8);
+ int cnt = 100;
+
+ /* transmit a short packet to LCD panel */
+ iowrite32(1 | data, mipi->base + 0x80d0); /* CMTSRTCTR */
+ iowrite32(1, mipi->base + 0x8070); /* CMTSRTREQ */
+
+ while ((ioread32(mipi->base + 0x8070) & 1) && --cnt)
+ udelay(1);
+
+ return cnt ? 0 : -ETIMEDOUT;
+}
+
+#define LCD_CHAN2MIPI(c) ((c) < LCDC_CHAN_MAINLCD || (c) > LCDC_CHAN_SUBLCD ? \
+ -EINVAL : (c) - 1)
+
+static int sh_mipi_dcs(int handle, u8 cmd)
+{
+ struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle));
+ if (!mipi)
+ return -ENODEV;
+ return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE, cmd, 0);
+}
+
+static int sh_mipi_dcs_param(int handle, u8 cmd, u8 param)
+{
+ struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle));
+ if (!mipi)
+ return -ENODEV;
+ return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE_PARAM, cmd,
+ param);
+}
+
+static void sh_mipi_dsi_enable(struct sh_mipi *mipi, bool enable)
+{
+ /*
+ * enable LCDC data tx, transition to LPS after completion of each HS
+ * packet
+ */
+ iowrite32(0x00000002 | enable, mipi->base + 0x8000); /* DTCTR */
+}
+
+static void sh_mipi_shutdown(struct platform_device *pdev)
+{
+ struct sh_mipi *mipi = platform_get_drvdata(pdev);
+
+ sh_mipi_dsi_enable(mipi, false);
+}
+
+static void mipi_display_on(void *arg, struct fb_info *info)
+{
+ struct sh_mipi *mipi = arg;
+
+ sh_mipi_dsi_enable(mipi, true);
+}
+
+static void mipi_display_off(void *arg)
+{
+ struct sh_mipi *mipi = arg;
+
+ sh_mipi_dsi_enable(mipi, false);
+}
+
+static int __init sh_mipi_setup(struct sh_mipi *mipi,
+ struct sh_mipi_dsi_info *pdata)
+{
+ void __iomem *base = mipi->base;
+ struct sh_mobile_lcdc_chan_cfg *ch = pdata->lcd_chan;
+ u32 pctype, datatype, pixfmt;
+ u32 linelength;
+ bool yuv;
+
+ /* Select data format */
+ switch (pdata->data_format) {
+ case MIPI_RGB888:
+ pctype = 0;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
+ pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+ linelength = ch->lcd_cfg.xres * 3;
+ yuv = false;
+ break;
+ case MIPI_RGB565:
+ pctype = 1;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
+ pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+ linelength = ch->lcd_cfg.xres * 2;
+ yuv = false;
+ break;
+ case MIPI_RGB666_LP:
+ pctype = 2;
+ datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
+ pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+ linelength = ch->lcd_cfg.xres * 3;
+ yuv = false;
+ break;
+ case MIPI_RGB666:
+ pctype = 3;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
+ pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
+ linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
+ yuv = false;
+ break;
+ case MIPI_BGR888:
+ pctype = 8;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
+ pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+ linelength = ch->lcd_cfg.xres * 3;
+ yuv = false;
+ break;
+ case MIPI_BGR565:
+ pctype = 9;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
+ pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+ linelength = ch->lcd_cfg.xres * 2;
+ yuv = false;
+ break;
+ case MIPI_BGR666_LP:
+ pctype = 0xa;
+ datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
+ pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+ linelength = ch->lcd_cfg.xres * 3;
+ yuv = false;
+ break;
+ case MIPI_BGR666:
+ pctype = 0xb;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
+ pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
+ linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
+ yuv = false;
+ break;
+ case MIPI_YUYV:
+ pctype = 4;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
+ pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+ linelength = ch->lcd_cfg.xres * 2;
+ yuv = true;
+ break;
+ case MIPI_UYVY:
+ pctype = 5;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
+ pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+ linelength = ch->lcd_cfg.xres * 2;
+ yuv = true;
+ break;
+ case MIPI_YUV420_L:
+ pctype = 6;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
+ pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
+ linelength = (ch->lcd_cfg.xres * 12 + 7) / 8;
+ yuv = true;
+ break;
+ case MIPI_YUV420:
+ pctype = 7;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
+ pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
+ /* Length of U/V line */
+ linelength = (ch->lcd_cfg.xres + 1) / 2;
+ yuv = true;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if ((yuv && ch->interface_type != YUV422) ||
+ (!yuv && ch->interface_type != RGB24))
+ return -EINVAL;
+
+ /* reset DSI link */
+ iowrite32(0x00000001, base); /* SYSCTRL */
+ /* Hold reset for 100 cycles of the slowest of bus, HS byte and LP clock */
+ udelay(50);
+ iowrite32(0x00000000, base); /* SYSCTRL */
+
+ /* setup DSI link */
+
+ /*
+ * Default = ULPS enable |
+ * Contention detection enabled |
+ * EoT packet transmission enable |
+ * CRC check enable |
+ * ECC check enable
+ * additionally enable first two lanes
+ */
+ iowrite32(0x00003703, base + 0x04); /* SYSCONF */
+ /*
+ * T_wakeup = 0x7000
+ * T_hs-trail = 3
+ * T_hs-prepare = 3
+ * T_clk-trail = 3
+ * T_clk-prepare = 2
+ */
+ iowrite32(0x70003332, base + 0x08); /* TIMSET */
+ /* no responses requested */
+ iowrite32(0x00000000, base + 0x18); /* RESREQSET0 */
+ /* request response to packets of type 0x28 */
+ iowrite32(0x00000100, base + 0x1c); /* RESREQSET1 */
+ /* High-speed transmission timeout, default 0xffffffff */
+ iowrite32(0x0fffffff, base + 0x20); /* HSTTOVSET */
+ /* LP reception timeout, default 0xffffffff */
+ iowrite32(0x0fffffff, base + 0x24); /* LPRTOVSET */
+ /* Turn-around timeout, default 0xffffffff */
+ iowrite32(0x0fffffff, base + 0x28); /* TATOVSET */
+ /* Peripheral reset timeout, default 0xffffffff */
+ iowrite32(0x0fffffff, base + 0x2c); /* PRTOVSET */
+ /* Enable timeout counters */
+ iowrite32(0x00000f00, base + 0x30); /* DSICTRL */
+ /* Interrupts not used, disable all */
+ iowrite32(0, base + DSIINTE);
+ /* DSI-Tx bias on */
+ iowrite32(0x00000001, base + 0x70); /* PHYCTRL */
+ udelay(200);
+ /* Deassert resets, power on, set multiplier */
+ iowrite32(0x03070b01, base + 0x70); /* PHYCTRL */
+
+ /* setup l-bridge */
+
+ /*
+ * Enable transmission of all packets,
+ * transmit LPS after each HS packet completion
+ */
+ iowrite32(0x00000006, base + 0x8000); /* DTCTR */
+ /* VSYNC width = 2 (<< 17) */
+ iowrite32(0x00040000 | (pctype << 12) | datatype, base + 0x8020); /* VMCTR1 */
+ /*
+ * Non-burst mode with sync pulses: VSE and HSE are output,
+ * HSA period allowed, no commands in LP
+ */
+ iowrite32(0x00e00000, base + 0x8024); /* VMCTR2 */
+ /*
+ * 0x660 = 1632 bytes per line (RGB24, 544 pixels: see
+ * sh_mobile_lcdc_info.ch[0].lcd_cfg.xres), HSALEN = 1 - default
+ * (unused, since VMCTR2[HSABM] = 0)
+ */
+ iowrite32(1 | (linelength << 16), base + 0x8028); /* VMLEN1 */
+
+ msleep(5);
+
+ /* setup LCD panel */
+
+ /* cf. drivers/video/omap/lcd_mipid.c */
+ sh_mipi_dcs(ch->chan, MIPI_DCS_EXIT_SLEEP_MODE);
+ msleep(120);
+ /*
+ * [7] - Page Address Mode
+ * [6] - Column Address Mode
+ * [5] - Page / Column Address Mode
+ * [4] - Display Device Line Refresh Order
+ * [3] - RGB/BGR Order
+ * [2] - Display Data Latch Data Order
+ * [1] - Flip Horizontal
+ * [0] - Flip Vertical
+ */
+ sh_mipi_dcs_param(ch->chan, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
+ /* cf. set_data_lines() */
+ sh_mipi_dcs_param(ch->chan, MIPI_DCS_SET_PIXEL_FORMAT,
+ pixfmt << 4);
+ sh_mipi_dcs(ch->chan, MIPI_DCS_SET_DISPLAY_ON);
+
+ return 0;
+}
+
+static int __init sh_mipi_probe(struct platform_device *pdev)
+{
+ struct sh_mipi *mipi;
+ struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ unsigned long rate, f_current;
+ int idx = pdev->id, ret;
+ char dsip_clk[] = "dsi.p_clk";
+
+ if (!res || idx >= ARRAY_SIZE(mipi_dsi) || !pdata)
+ return -ENODEV;
+
+ mutex_lock(&array_lock);
+ if (idx < 0)
+ for (idx = 0; idx < ARRAY_SIZE(mipi_dsi) && mipi_dsi[idx]; idx++)
+ ;
+
+ if (idx == ARRAY_SIZE(mipi_dsi)) {
+ ret = -EBUSY;
+ goto efindslot;
+ }
+
+ mipi = kzalloc(sizeof(*mipi), GFP_KERNEL);
+ if (!mipi) {
+ ret = -ENOMEM;
+ goto ealloc;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ dev_err(&pdev->dev, "MIPI register region already claimed\n");
+ ret = -EBUSY;
+ goto ereqreg;
+ }
+
+ mipi->base = ioremap(res->start, resource_size(res));
+ if (!mipi->base) {
+ ret = -ENOMEM;
+ goto emap;
+ }
+
+ mipi->dsit_clk = clk_get(&pdev->dev, "dsit_clk");
+ if (IS_ERR(mipi->dsit_clk)) {
+ ret = PTR_ERR(mipi->dsit_clk);
+ goto eclktget;
+ }
+
+ f_current = clk_get_rate(mipi->dsit_clk);
+ /* 80MHz required by the datasheet */
+ rate = clk_round_rate(mipi->dsit_clk, 80000000);
+ if (rate > 0 && rate != f_current)
+ ret = clk_set_rate(mipi->dsit_clk, rate);
+ else
+ ret = rate;
+ if (ret < 0)
+ goto esettrate;
+
+ dev_dbg(&pdev->dev, "DSI-T clk %lu -> %lu\n", f_current, rate);
+
+ sprintf(dsip_clk, "dsi%1.1dp_clk", idx);
+ mipi->dsip_clk = clk_get(&pdev->dev, dsip_clk);
+ if (IS_ERR(mipi->dsip_clk)) {
+ ret = PTR_ERR(mipi->dsip_clk);
+ goto eclkpget;
+ }
+
+ f_current = clk_get_rate(mipi->dsip_clk);
+ /* Between 10 and 50MHz */
+ rate = clk_round_rate(mipi->dsip_clk, 24000000);
+ if (rate > 0 && rate != f_current)
+ ret = clk_set_rate(mipi->dsip_clk, rate);
+ else
+ ret = rate;
+ if (ret < 0)
+ goto esetprate;
+
+ dev_dbg(&pdev->dev, "DSI-P clk %lu -> %lu\n", f_current, rate);
+
+ msleep(10);
+
+ ret = clk_enable(mipi->dsit_clk);
+ if (ret < 0)
+ goto eclkton;
+
+ ret = clk_enable(mipi->dsip_clk);
+ if (ret < 0)
+ goto eclkpon;
+
+ mipi_dsi[idx] = mipi;
+
+ ret = sh_mipi_setup(mipi, pdata);
+ if (ret < 0)
+ goto emipisetup;
+
+ mutex_unlock(&array_lock);
+ platform_set_drvdata(pdev, mipi);
+
+ /* Set up LCDC callbacks */
+ pdata->lcd_chan->board_cfg.board_data = mipi;
+ pdata->lcd_chan->board_cfg.display_on = mipi_display_on;
+ pdata->lcd_chan->board_cfg.display_off = mipi_display_off;
+
+ return 0;
+
+emipisetup:
+ mipi_dsi[idx] = NULL;
+ clk_disable(mipi->dsip_clk);
+eclkpon:
+ clk_disable(mipi->dsit_clk);
+eclkton:
+esetprate:
+ clk_put(mipi->dsip_clk);
+eclkpget:
+esettrate:
+ clk_put(mipi->dsit_clk);
+eclktget:
+ iounmap(mipi->base);
+emap:
+ release_mem_region(res->start, resource_size(res));
+ereqreg:
+ kfree(mipi);
+ealloc:
+efindslot:
+ mutex_unlock(&array_lock);
+
+ return ret;
+}
+
+static int __exit sh_mipi_remove(struct platform_device *pdev)
+{
+ struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct sh_mipi *mipi = platform_get_drvdata(pdev);
+ int i, ret;
+
+ mutex_lock(&array_lock);
+
+ for (i = 0; i < ARRAY_SIZE(mipi_dsi) && mipi_dsi[i] != mipi; i++)
+ ;
+
+ if (i == ARRAY_SIZE(mipi_dsi)) {
+ ret = -EINVAL;
+ } else {
+ ret = 0;
+ mipi_dsi[i] = NULL;
+ }
+
+ mutex_unlock(&array_lock);
+
+ if (ret < 0)
+ return ret;
+
+ pdata->lcd_chan->board_cfg.display_on = NULL;
+ pdata->lcd_chan->board_cfg.display_off = NULL;
+ pdata->lcd_chan->board_cfg.board_data = NULL;
+
+ clk_disable(mipi->dsip_clk);
+ clk_disable(mipi->dsit_clk);
+ clk_put(mipi->dsit_clk);
+ clk_put(mipi->dsip_clk);
+ iounmap(mipi->base);
+ if (res)
+ release_mem_region(res->start, resource_size(res));
+ platform_set_drvdata(pdev, NULL);
+ kfree(mipi);
+
+ return 0;
+}
+
+static struct platform_driver sh_mipi_driver = {
+ .remove = __exit_p(sh_mipi_remove),
+ .shutdown = sh_mipi_shutdown,
+ .driver = {
+ .name = "sh-mipi-dsi",
+ },
+};
+
+static int __init sh_mipi_init(void)
+{
+ return platform_driver_probe(&sh_mipi_driver, sh_mipi_probe);
+}
+module_init(sh_mipi_init);
+
+static void __exit sh_mipi_exit(void)
+{
+ platform_driver_unregister(&sh_mipi_driver);
+}
+module_exit(sh_mipi_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_DESCRIPTION("SuperH / ARM-shmobile MIPI DSI driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * SH-Mobile High-Definition Multimedia Interface (HDMI) driver
+ * for SLISHDMI13T and SLIPHDMIT IP cores
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <video/sh_mobile_hdmi.h>
+#include <video/sh_mobile_lcdc.h>
+
+#define HDMI_SYSTEM_CTRL 0x00 /* System control */
+#define HDMI_L_R_DATA_SWAP_CTRL_RPKT 0x01 /* L/R data swap control,
+ bits 19..16 of 20-bit N for Audio Clock Regeneration packet */
+#define HDMI_20_BIT_N_FOR_AUDIO_RPKT_15_8 0x02 /* bits 15..8 of 20-bit N for Audio Clock Regeneration packet */
+#define HDMI_20_BIT_N_FOR_AUDIO_RPKT_7_0 0x03 /* bits 7..0 of 20-bit N for Audio Clock Regeneration packet */
+#define HDMI_SPDIF_AUDIO_SAMP_FREQ_CTS 0x04 /* SPDIF audio sampling frequency,
+ bits 19..16 of Internal CTS */
+#define HDMI_INTERNAL_CTS_15_8 0x05 /* bits 15..8 of Internal CTS */
+#define HDMI_INTERNAL_CTS_7_0 0x06 /* bits 7..0 of Internal CTS */
+#define HDMI_EXTERNAL_CTS_19_16 0x07 /* External CTS */
+#define HDMI_EXTERNAL_CTS_15_8 0x08 /* External CTS */
+#define HDMI_EXTERNAL_CTS_7_0 0x09 /* External CTS */
+#define HDMI_AUDIO_SETTING_1 0x0A /* Audio setting.1 */
+#define HDMI_AUDIO_SETTING_2 0x0B /* Audio setting.2 */
+#define HDMI_I2S_AUDIO_SET 0x0C /* I2S audio setting */
+#define HDMI_DSD_AUDIO_SET 0x0D /* DSD audio setting */
+#define HDMI_DEBUG_MONITOR_1 0x0E /* Debug monitor.1 */
+#define HDMI_DEBUG_MONITOR_2 0x0F /* Debug monitor.2 */
+#define HDMI_I2S_INPUT_PIN_SWAP 0x10 /* I2S input pin swap */
+#define HDMI_AUDIO_STATUS_BITS_SETTING_1 0x11 /* Audio status bits setting.1 */
+#define HDMI_AUDIO_STATUS_BITS_SETTING_2 0x12 /* Audio status bits setting.2 */
+#define HDMI_CATEGORY_CODE 0x13 /* Category code */
+#define HDMI_SOURCE_NUM_AUDIO_WORD_LEN 0x14 /* Source number/Audio word length */
+#define HDMI_AUDIO_VIDEO_SETTING_1 0x15 /* Audio/Video setting.1 */
+#define HDMI_VIDEO_SETTING_1 0x16 /* Video setting.1 */
+#define HDMI_DEEP_COLOR_MODES 0x17 /* Deep Color Modes */
+
+/* 12 16- and 10-bit Color space conversion parameters: 0x18..0x2f */
+#define HDMI_COLOR_SPACE_CONVERSION_PARAMETERS 0x18
+
+#define HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS 0x30 /* External video parameter settings */
+#define HDMI_EXTERNAL_H_TOTAL_7_0 0x31 /* External horizontal total (LSB) */
+#define HDMI_EXTERNAL_H_TOTAL_11_8 0x32 /* External horizontal total (MSB) */
+#define HDMI_EXTERNAL_H_BLANK_7_0 0x33 /* External horizontal blank (LSB) */
+#define HDMI_EXTERNAL_H_BLANK_9_8 0x34 /* External horizontal blank (MSB) */
+#define HDMI_EXTERNAL_H_DELAY_7_0 0x35 /* External horizontal delay (LSB) */
+#define HDMI_EXTERNAL_H_DELAY_9_8 0x36 /* External horizontal delay (MSB) */
+#define HDMI_EXTERNAL_H_DURATION_7_0 0x37 /* External horizontal duration (LSB) */
+#define HDMI_EXTERNAL_H_DURATION_9_8 0x38 /* External horizontal duration (MSB) */
+#define HDMI_EXTERNAL_V_TOTAL_7_0 0x39 /* External vertical total (LSB) */
+#define HDMI_EXTERNAL_V_TOTAL_9_8 0x3A /* External vertical total (MSB) */
+#define HDMI_AUDIO_VIDEO_SETTING_2 0x3B /* Audio/Video setting.2 */
+#define HDMI_EXTERNAL_V_BLANK 0x3D /* External vertical blank */
+#define HDMI_EXTERNAL_V_DELAY 0x3E /* External vertical delay */
+#define HDMI_EXTERNAL_V_DURATION 0x3F /* External vertical duration */
+#define HDMI_CTRL_PKT_MANUAL_SEND_CONTROL 0x40 /* Control packet manual send control */
+#define HDMI_CTRL_PKT_AUTO_SEND 0x41 /* Control packet auto send with VSYNC control */
+#define HDMI_AUTO_CHECKSUM_OPTION 0x42 /* Auto checksum option */
+#define HDMI_VIDEO_SETTING_2 0x45 /* Video setting.2 */
+#define HDMI_OUTPUT_OPTION 0x46 /* Output option */
+#define HDMI_SLIPHDMIT_PARAM_OPTION 0x51 /* SLIPHDMIT parameter option */
+#define HDMI_HSYNC_PMENT_AT_EMB_7_0 0x52 /* HSYNC placement at embedded sync (LSB) */
+#define HDMI_HSYNC_PMENT_AT_EMB_15_8 0x53 /* HSYNC placement at embedded sync (MSB) */
+#define HDMI_VSYNC_PMENT_AT_EMB_7_0 0x54 /* VSYNC placement at embedded sync (LSB) */
+#define HDMI_VSYNC_PMENT_AT_EMB_14_8 0x55 /* VSYNC placement at embedded sync (MSB) */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_1 0x56 /* SLIPHDMIT parameter settings.1 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_2 0x57 /* SLIPHDMIT parameter settings.2 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_3 0x58 /* SLIPHDMIT parameter settings.3 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_5 0x59 /* SLIPHDMIT parameter settings.5 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_6 0x5A /* SLIPHDMIT parameter settings.6 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_7 0x5B /* SLIPHDMIT parameter settings.7 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_8 0x5C /* SLIPHDMIT parameter settings.8 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_9 0x5D /* SLIPHDMIT parameter settings.9 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_10 0x5E /* SLIPHDMIT parameter settings.10 */
+#define HDMI_CTRL_PKT_BUF_INDEX 0x5F /* Control packet buffer index */
+#define HDMI_CTRL_PKT_BUF_ACCESS_HB0 0x60 /* Control packet data buffer access window - HB0 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_HB1 0x61 /* Control packet data buffer access window - HB1 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_HB2 0x62 /* Control packet data buffer access window - HB2 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB0 0x63 /* Control packet data buffer access window - PB0 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB1 0x64 /* Control packet data buffer access window - PB1 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB2 0x65 /* Control packet data buffer access window - PB2 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB3 0x66 /* Control packet data buffer access window - PB3 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB4 0x67 /* Control packet data buffer access window - PB4 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB5 0x68 /* Control packet data buffer access window - PB5 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB6 0x69 /* Control packet data buffer access window - PB6 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB7 0x6A /* Control packet data buffer access window - PB7 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB8 0x6B /* Control packet data buffer access window - PB8 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB9 0x6C /* Control packet data buffer access window - PB9 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB10 0x6D /* Control packet data buffer access window - PB10 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB11 0x6E /* Control packet data buffer access window - PB11 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB12 0x6F /* Control packet data buffer access window - PB12 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB13 0x70 /* Control packet data buffer access window - PB13 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB14 0x71 /* Control packet data buffer access window - PB14 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB15 0x72 /* Control packet data buffer access window - PB15 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB16 0x73 /* Control packet data buffer access window - PB16 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB17 0x74 /* Control packet data buffer access window - PB17 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB18 0x75 /* Control packet data buffer access window - PB18 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB19 0x76 /* Control packet data buffer access window - PB19 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB20 0x77 /* Control packet data buffer access window - PB20 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB21 0x78 /* Control packet data buffer access window - PB21 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB22 0x79 /* Control packet data buffer access window - PB22 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB23 0x7A /* Control packet data buffer access window - PB23 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB24 0x7B /* Control packet data buffer access window - PB24 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB25 0x7C /* Control packet data buffer access window - PB25 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB26 0x7D /* Control packet data buffer access window - PB26 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB27 0x7E /* Control packet data buffer access window - PB27 */
+#define HDMI_EDID_KSV_FIFO_ACCESS_WINDOW 0x80 /* EDID/KSV FIFO access window */
+#define HDMI_DDC_BUS_ACCESS_FREQ_CTRL_7_0 0x81 /* DDC bus access frequency control (LSB) */
+#define HDMI_DDC_BUS_ACCESS_FREQ_CTRL_15_8 0x82 /* DDC bus access frequency control (MSB) */
+#define HDMI_INTERRUPT_MASK_1 0x92 /* Interrupt mask.1 */
+#define HDMI_INTERRUPT_MASK_2 0x93 /* Interrupt mask.2 */
+#define HDMI_INTERRUPT_STATUS_1 0x94 /* Interrupt status.1 */
+#define HDMI_INTERRUPT_STATUS_2 0x95 /* Interrupt status.2 */
+#define HDMI_INTERRUPT_MASK_3 0x96 /* Interrupt mask.3 */
+#define HDMI_INTERRUPT_MASK_4 0x97 /* Interrupt mask.4 */
+#define HDMI_INTERRUPT_STATUS_3 0x98 /* Interrupt status.3 */
+#define HDMI_INTERRUPT_STATUS_4 0x99 /* Interrupt status.4 */
+#define HDMI_SOFTWARE_HDCP_CONTROL_1 0x9A /* Software HDCP control.1 */
+#define HDMI_FRAME_COUNTER 0x9C /* Frame counter */
+#define HDMI_FRAME_COUNTER_FOR_RI_CHECK 0x9D /* Frame counter for Ri check */
+#define HDMI_HDCP_CONTROL 0xAF /* HDCP control */
+#define HDMI_RI_FRAME_COUNT_REGISTER 0xB2 /* Ri frame count register */
+#define HDMI_DDC_BUS_CONTROL 0xB7 /* DDC bus control */
+#define HDMI_HDCP_STATUS 0xB8 /* HDCP status */
+#define HDMI_SHA0 0xB9 /* sha0 */
+#define HDMI_SHA1 0xBA /* sha1 */
+#define HDMI_SHA2 0xBB /* sha2 */
+#define HDMI_SHA3 0xBC /* sha3 */
+#define HDMI_SHA4 0xBD /* sha4 */
+#define HDMI_BCAPS_READ 0xBE /* BCAPS read / debug */
+#define HDMI_AKSV_BKSV_7_0_MONITOR 0xBF /* AKSV/BKSV[7:0] monitor */
+#define HDMI_AKSV_BKSV_15_8_MONITOR 0xC0 /* AKSV/BKSV[15:8] monitor */
+#define HDMI_AKSV_BKSV_23_16_MONITOR 0xC1 /* AKSV/BKSV[23:16] monitor */
+#define HDMI_AKSV_BKSV_31_24_MONITOR 0xC2 /* AKSV/BKSV[31:24] monitor */
+#define HDMI_AKSV_BKSV_39_32_MONITOR 0xC3 /* AKSV/BKSV[39:32] monitor */
+#define HDMI_EDID_SEGMENT_POINTER 0xC4 /* EDID segment pointer */
+#define HDMI_EDID_WORD_ADDRESS 0xC5 /* EDID word address */
+#define HDMI_EDID_DATA_FIFO_ADDRESS 0xC6 /* EDID data FIFO address */
+#define HDMI_NUM_OF_HDMI_DEVICES 0xC7 /* Number of HDMI devices */
+#define HDMI_HDCP_ERROR_CODE 0xC8 /* HDCP error code */
+#define HDMI_100MS_TIMER_SET 0xC9 /* 100ms timer setting */
+#define HDMI_5SEC_TIMER_SET 0xCA /* 5sec timer setting */
+#define HDMI_RI_READ_COUNT 0xCB /* Ri read count */
+#define HDMI_AN_SEED 0xCC /* An seed */
+#define HDMI_MAX_NUM_OF_RCIVRS_ALLOWED 0xCD /* Maximum number of receivers allowed */
+#define HDMI_HDCP_MEMORY_ACCESS_CONTROL_1 0xCE /* HDCP memory access control.1 */
+#define HDMI_HDCP_MEMORY_ACCESS_CONTROL_2 0xCF /* HDCP memory access control.2 */
+#define HDMI_HDCP_CONTROL_2 0xD0 /* HDCP Control 2 */
+#define HDMI_HDCP_KEY_MEMORY_CONTROL 0xD2 /* HDCP Key Memory Control */
+#define HDMI_COLOR_SPACE_CONV_CONFIG_1 0xD3 /* Color space conversion configuration.1 */
+#define HDMI_VIDEO_SETTING_3 0xD4 /* Video setting.3 */
+#define HDMI_RI_7_0 0xD5 /* Ri[7:0] */
+#define HDMI_RI_15_8 0xD6 /* Ri[15:8] */
+#define HDMI_PJ 0xD7 /* Pj */
+#define HDMI_SHA_RD 0xD8 /* sha_rd */
+#define HDMI_RI_7_0_SAVED 0xD9 /* Ri[7:0] saved */
+#define HDMI_RI_15_8_SAVED 0xDA /* Ri[15:8] saved */
+#define HDMI_PJ_SAVED 0xDB /* Pj saved */
+#define HDMI_NUM_OF_DEVICES 0xDC /* Number of devices */
+#define HDMI_HOT_PLUG_MSENS_STATUS 0xDF /* Hot plug/MSENS status */
+#define HDMI_BCAPS_WRITE 0xE0 /* bcaps */
+#define HDMI_BSTAT_7_0 0xE1 /* bstat[7:0] */
+#define HDMI_BSTAT_15_8 0xE2 /* bstat[15:8] */
+#define HDMI_BKSV_7_0 0xE3 /* bksv[7:0] */
+#define HDMI_BKSV_15_8 0xE4 /* bksv[15:8] */
+#define HDMI_BKSV_23_16 0xE5 /* bksv[23:16] */
+#define HDMI_BKSV_31_24 0xE6 /* bksv[31:24] */
+#define HDMI_BKSV_39_32 0xE7 /* bksv[39:32] */
+#define HDMI_AN_7_0 0xE8 /* An[7:0] */
+#define HDMI_AN_15_8 0xE9 /* An [15:8] */
+#define HDMI_AN_23_16 0xEA /* An [23:16] */
+#define HDMI_AN_31_24 0xEB /* An [31:24] */
+#define HDMI_AN_39_32 0xEC /* An [39:32] */
+#define HDMI_AN_47_40 0xED /* An [47:40] */
+#define HDMI_AN_55_48 0xEE /* An [55:48] */
+#define HDMI_AN_63_56 0xEF /* An [63:56] */
+#define HDMI_PRODUCT_ID 0xF0 /* Product ID */
+#define HDMI_REVISION_ID 0xF1 /* Revision ID */
+#define HDMI_TEST_MODE 0xFE /* Test mode */
+
+enum hotplug_state {
+ HDMI_HOTPLUG_DISCONNECTED,
+ HDMI_HOTPLUG_CONNECTED,
+ HDMI_HOTPLUG_EDID_DONE,
+};
+
+struct sh_hdmi {
+ void __iomem *base;
+ enum hotplug_state hp_state;
+ struct clk *hdmi_clk;
+ struct device *dev;
+ struct fb_info *info;
+ struct delayed_work edid_work;
+ struct fb_var_screeninfo var;
+};
+
+static void hdmi_write(struct sh_hdmi *hdmi, u8 data, u8 reg)
+{
+ iowrite8(data, hdmi->base + reg);
+}
+
+static u8 hdmi_read(struct sh_hdmi *hdmi, u8 reg)
+{
+ return ioread8(hdmi->base + reg);
+}
+
+/* External video parameter settings */
+static void hdmi_external_video_param(struct sh_hdmi *hdmi)
+{
+ struct fb_var_screeninfo *var = &hdmi->var;
+ u16 htotal, hblank, hdelay, vtotal, vblank, vdelay, voffset;
+ u8 sync = 0;
+
+ htotal = var->xres + var->right_margin + var->left_margin + var->hsync_len;
+
+ hdelay = var->hsync_len + var->left_margin;
+ hblank = var->right_margin + hdelay;
+
+ /*
+ * Vertical timing looks a bit different in Figure 18,
+ * but let's try the same first by setting offset = 0
+ */
+ vtotal = var->yres + var->upper_margin + var->lower_margin + var->vsync_len;
+
+ vdelay = var->vsync_len + var->upper_margin;
+ vblank = var->lower_margin + vdelay;
+ voffset = min(var->upper_margin / 2, 6U);
+
+ /*
+ * [3]: VSYNC polarity: Positive
+ * [2]: HSYNC polarity: Positive
+ * [1]: Interlace/Progressive: Progressive
+ * [0]: External video settings enable: used.
+ */
+ if (var->sync & FB_SYNC_HOR_HIGH_ACT)
+ sync |= 4;
+ if (var->sync & FB_SYNC_VERT_HIGH_ACT)
+ sync |= 8;
+
+ pr_debug("H: %u, %u, %u, %u; V: %u, %u, %u, %u; sync 0x%x\n",
+ htotal, hblank, hdelay, var->hsync_len,
+ vtotal, vblank, vdelay, var->vsync_len, sync);
+
+ hdmi_write(hdmi, sync | (voffset << 4), HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS);
+
+ hdmi_write(hdmi, htotal, HDMI_EXTERNAL_H_TOTAL_7_0);
+ hdmi_write(hdmi, htotal >> 8, HDMI_EXTERNAL_H_TOTAL_11_8);
+
+ hdmi_write(hdmi, hblank, HDMI_EXTERNAL_H_BLANK_7_0);
+ hdmi_write(hdmi, hblank >> 8, HDMI_EXTERNAL_H_BLANK_9_8);
+
+ hdmi_write(hdmi, hdelay, HDMI_EXTERNAL_H_DELAY_7_0);
+ hdmi_write(hdmi, hdelay >> 8, HDMI_EXTERNAL_H_DELAY_9_8);
+
+ hdmi_write(hdmi, var->hsync_len, HDMI_EXTERNAL_H_DURATION_7_0);
+ hdmi_write(hdmi, var->hsync_len >> 8, HDMI_EXTERNAL_H_DURATION_9_8);
+
+ hdmi_write(hdmi, vtotal, HDMI_EXTERNAL_V_TOTAL_7_0);
+ hdmi_write(hdmi, vtotal >> 8, HDMI_EXTERNAL_V_TOTAL_9_8);
+
+ hdmi_write(hdmi, vblank, HDMI_EXTERNAL_V_BLANK);
+
+ hdmi_write(hdmi, vdelay, HDMI_EXTERNAL_V_DELAY);
+
+ hdmi_write(hdmi, var->vsync_len, HDMI_EXTERNAL_V_DURATION);
+
+ /* Set bit 0 of HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS here for manual mode */
+}
+
+/**
+ * sh_hdmi_video_config()
+ */
+static void sh_hdmi_video_config(struct sh_hdmi *hdmi)
+{
+ /*
+ * [7:4]: Audio sampling frequency: 48kHz
+ * [3:1]: Input video format: RGB and YCbCr 4:4:4 (Y on Green)
+ * [0]: Internal/External DE select: internal
+ */
+ hdmi_write(hdmi, 0x20, HDMI_AUDIO_VIDEO_SETTING_1);
+
+ /*
+ * [7:6]: Video output format: RGB 4:4:4
+ * [5:4]: Input video data width: 8 bit
+ * [3:1]: EAV/SAV location: channel 1
+ * [0]: Video input color space: RGB
+ */
+ hdmi_write(hdmi, 0x34, HDMI_VIDEO_SETTING_1);
+
+ /*
+ * [7:6]: Together with bit [6] of HDMI_AUDIO_VIDEO_SETTING_2, which is
+ * left at 0 by default, this configures 24bpp and sets the Color Depth
+ * (CD) field in the General Control Packet
+ */
+ hdmi_write(hdmi, 0x20, HDMI_DEEP_COLOR_MODES);
+}
+
+/**
+ * sh_hdmi_audio_config()
+ */
+static void sh_hdmi_audio_config(struct sh_hdmi *hdmi)
+{
+ /*
+ * [7:4] L/R data swap control
+ * [3:0] appropriate N[19:16]
+ */
+ hdmi_write(hdmi, 0x00, HDMI_L_R_DATA_SWAP_CTRL_RPKT);
+ /* appropriate N[15:8] */
+ hdmi_write(hdmi, 0x18, HDMI_20_BIT_N_FOR_AUDIO_RPKT_15_8);
+ /* appropriate N[7:0] */
+ hdmi_write(hdmi, 0x00, HDMI_20_BIT_N_FOR_AUDIO_RPKT_7_0);
+
+ /* [7:4] 48 kHz SPDIF not used */
+ hdmi_write(hdmi, 0x20, HDMI_SPDIF_AUDIO_SAMP_FREQ_CTS);
+
+ /*
+ * [6:5] set required down sampling rate if required
+ * [4:3] set required audio source
+ */
+ hdmi_write(hdmi, 0x00, HDMI_AUDIO_SETTING_1);
+
+ /* [3:0] set sending channel number for channel status */
+ hdmi_write(hdmi, 0x40, HDMI_AUDIO_SETTING_2);
+
+ /*
+ * [5:2] set valid I2S source input pin
+ * [1:0] set input I2S source mode
+ */
+ hdmi_write(hdmi, 0x04, HDMI_I2S_AUDIO_SET);
+
+ /* [7:4] set valid DSD source input pin */
+ hdmi_write(hdmi, 0x00, HDMI_DSD_AUDIO_SET);
+
+ /* [7:0] set appropriate I2S input pin swap settings if required */
+ hdmi_write(hdmi, 0x00, HDMI_I2S_INPUT_PIN_SWAP);
+
+ /*
+ * [7] set validity bit for channel status
+ * [3:0] set original sample frequency for channel status
+ */
+ hdmi_write(hdmi, 0x00, HDMI_AUDIO_STATUS_BITS_SETTING_1);
+
+ /*
+ * [7] set value for channel status
+ * [6] set value for channel status
+ * [5] set copyright bit for channel status
+ * [4:2] set additional information for channel status
+ * [1:0] set clock accuracy for channel status
+ */
+ hdmi_write(hdmi, 0x00, HDMI_AUDIO_STATUS_BITS_SETTING_2);
+
+ /* [7:0] set category code for channel status */
+ hdmi_write(hdmi, 0x00, HDMI_CATEGORY_CODE);
+
+ /*
+ * [7:4] set source number for channel status
+ * [3:0] set word length for channel status
+ */
+ hdmi_write(hdmi, 0x00, HDMI_SOURCE_NUM_AUDIO_WORD_LEN);
+
+ /* [7:4] set sample frequency for channel status */
+ hdmi_write(hdmi, 0x20, HDMI_AUDIO_VIDEO_SETTING_1);
+}
+
+/**
+ * sh_hdmi_phy_config()
+ */
+static void sh_hdmi_phy_config(struct sh_hdmi *hdmi)
+{
+ /* 720p, 8bit, 74.25MHz. Might need to be adjusted for other formats */
+ hdmi_write(hdmi, 0x19, HDMI_SLIPHDMIT_PARAM_SETTINGS_1);
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2);
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3);
+ /* PLLA_CONFIG[7:0]: VCO gain, VCO offset, LPF resistance[0] */
+ hdmi_write(hdmi, 0x44, HDMI_SLIPHDMIT_PARAM_SETTINGS_5);
+ hdmi_write(hdmi, 0x32, HDMI_SLIPHDMIT_PARAM_SETTINGS_6);
+ hdmi_write(hdmi, 0x4A, HDMI_SLIPHDMIT_PARAM_SETTINGS_7);
+ hdmi_write(hdmi, 0x0E, HDMI_SLIPHDMIT_PARAM_SETTINGS_8);
+ hdmi_write(hdmi, 0x25, HDMI_SLIPHDMIT_PARAM_SETTINGS_9);
+ hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10);
+}
+
+/**
+ * sh_hdmi_avi_infoframe_setup() - Auxiliary Video Information InfoFrame CONTROL PACKET
+ */
+static void sh_hdmi_avi_infoframe_setup(struct sh_hdmi *hdmi)
+{
+ /* AVI InfoFrame */
+ hdmi_write(hdmi, 0x06, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* Packet Type = 0x82 */
+ hdmi_write(hdmi, 0x82, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+
+ /* Version = 0x02 */
+ hdmi_write(hdmi, 0x02, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+
+ /* Length = 13 (0x0D) */
+ hdmi_write(hdmi, 0x0D, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* N. A. Checksum */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0);
+
+ /*
+ * Y = RGB
+ * A0 = No Data
+ * B = Bar Data not valid
+ * S = No Data
+ */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB1);
+
+ /*
+ * C = No Data
+ * M = 16:9 Picture Aspect Ratio
+ * R = Same as picture aspect ratio
+ */
+ hdmi_write(hdmi, 0x28, HDMI_CTRL_PKT_BUF_ACCESS_PB2);
+
+ /*
+ * ITC = No Data
+ * EC = xvYCC601
+ * Q = Default (depends on video format)
+ * SC = No Known non_uniform Scaling
+ */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB3);
+
+ /*
+ * VIC = 1280 x 720p: ignored if external config is used
+ * Send 2 for 720 x 480p, 16 for 1080p
+ */
+ hdmi_write(hdmi, 4, HDMI_CTRL_PKT_BUF_ACCESS_PB4);
+
+ /* PR = No Repetition */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB5);
+
+ /* Line Number of End of Top Bar (lower 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB6);
+
+ /* Line Number of End of Top Bar (upper 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB7);
+
+ /* Line Number of Start of Bottom Bar (lower 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB8);
+
+ /* Line Number of Start of Bottom Bar (upper 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB9);
+
+ /* Pixel Number of End of Left Bar (lower 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB10);
+
+ /* Pixel Number of End of Left Bar (upper 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB11);
+
+ /* Pixel Number of Start of Right Bar (lower 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB12);
+
+ /* Pixel Number of Start of Right Bar (upper 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB13);
+}
+
+/**
+ * sh_hdmi_audio_infoframe_setup() - Audio InfoFrame of CONTROL PACKET
+ */
+static void sh_hdmi_audio_infoframe_setup(struct sh_hdmi *hdmi)
+{
+ /* Audio InfoFrame */
+ hdmi_write(hdmi, 0x08, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* Packet Type = 0x84 */
+ hdmi_write(hdmi, 0x84, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+
+ /* Version Number = 0x01 */
+ hdmi_write(hdmi, 0x01, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+
+ /* 0 Length = 10 (0x0A) */
+ hdmi_write(hdmi, 0x0A, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* n. a. Checksum */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0);
+
+ /* Audio Channel Count = Refer to Stream Header */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB1);
+
+ /* Refer to Stream Header */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB2);
+
+ /* Format depends on coding type (i.e. CT0...CT3) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB3);
+
+ /* Speaker Channel Allocation = Front Right + Front Left */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB4);
+
+ /* Level Shift Value = 0 dB, Down - mix is permitted or no information */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB5);
+
+ /* Reserved (0) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB6);
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB7);
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB8);
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB9);
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB10);
+}
+
+/**
+ * sh_hdmi_gamut_metadata_setup() - Gamut Metadata Packet of CONTROL PACKET
+ */
+static void sh_hdmi_gamut_metadata_setup(struct sh_hdmi *hdmi)
+{
+ int i;
+
+ /* Gamut Metadata Packet */
+ hdmi_write(hdmi, 0x04, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* Packet Type = 0x0A */
+ hdmi_write(hdmi, 0x0A, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+ /* Gamut Packet is not used, so default value */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+ /* Gamut Packet is not used, so default value */
+ hdmi_write(hdmi, 0x10, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* GBD bytes 0 through 27 */
+ for (i = 0; i <= 27; i++)
+ /* HDMI_CTRL_PKT_BUF_ACCESS_PB0_63H - PB27_7EH */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_acp_setup() - Audio Content Protection Packet (ACP)
+ */
+static void sh_hdmi_acp_setup(struct sh_hdmi *hdmi)
+{
+ int i;
+
+ /* Audio Content Protection Packet (ACP) */
+ hdmi_write(hdmi, 0x01, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* Packet Type = 0x04 */
+ hdmi_write(hdmi, 0x04, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+ /* ACP_Type */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+ /* Reserved (0) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* GBD bytes 0 through 27 */
+ for (i = 0; i <= 27; i++)
+ /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_isrc1_setup() - ISRC1 Packet
+ */
+static void sh_hdmi_isrc1_setup(struct sh_hdmi *hdmi)
+{
+ int i;
+
+ /* ISRC1 Packet */
+ hdmi_write(hdmi, 0x02, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* Packet Type = 0x05 */
+ hdmi_write(hdmi, 0x05, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+ /* ISRC_Cont, ISRC_Valid, Reserved (0), ISRC_Status */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+ /* Reserved (0) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* PB0 UPC_EAN_ISRC_0-15 */
+ /* Bytes PB16-PB27 shall be set to a value of 0. */
+ for (i = 0; i <= 27; i++)
+ /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_isrc2_setup() - ISRC2 Packet
+ */
+static void sh_hdmi_isrc2_setup(struct sh_hdmi *hdmi)
+{
+ int i;
+
+ /* ISRC2 Packet */
+ hdmi_write(hdmi, 0x03, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* HB0 Packet Type = 0x06 */
+ hdmi_write(hdmi, 0x06, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+ /* Reserved (0) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+ /* Reserved (0) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* PB0 UPC_EAN_ISRC_16-31 */
+ /* Bytes PB16-PB27 shall be set to a value of 0. */
+ for (i = 0; i <= 27; i++)
+ /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_configure() - Initialise HDMI for output
+ */
+static void sh_hdmi_configure(struct sh_hdmi *hdmi)
+{
+ /* Configure video format */
+ sh_hdmi_video_config(hdmi);
+
+ /* Configure audio format */
+ sh_hdmi_audio_config(hdmi);
+
+ /* Configure PHY */
+ sh_hdmi_phy_config(hdmi);
+
+ /* Auxiliary Video Information (AVI) InfoFrame */
+ sh_hdmi_avi_infoframe_setup(hdmi);
+
+ /* Audio InfoFrame */
+ sh_hdmi_audio_infoframe_setup(hdmi);
+
+ /* Gamut Metadata packet */
+ sh_hdmi_gamut_metadata_setup(hdmi);
+
+ /* Audio Content Protection (ACP) Packet */
+ sh_hdmi_acp_setup(hdmi);
+
+ /* ISRC1 Packet */
+ sh_hdmi_isrc1_setup(hdmi);
+
+ /* ISRC2 Packet */
+ sh_hdmi_isrc2_setup(hdmi);
+
+ /*
+ * Control packet auto send with VSYNC control: auto send
+ * General control, Gamut metadata, ISRC, and ACP packets
+ */
+ hdmi_write(hdmi, 0x8E, HDMI_CTRL_PKT_AUTO_SEND);
+
+ /* FIXME */
+ msleep(10);
+
+ /* PS mode b->d, reset PLLA and PLLB */
+ hdmi_write(hdmi, 0x4C, HDMI_SYSTEM_CTRL);
+
+ udelay(10);
+
+ hdmi_write(hdmi, 0x40, HDMI_SYSTEM_CTRL);
+}
+
+static void sh_hdmi_read_edid(struct sh_hdmi *hdmi)
+{
+ struct fb_var_screeninfo *var = &hdmi->var;
+ struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+ struct fb_videomode *lcd_cfg = &pdata->lcd_chan->lcd_cfg;
+ unsigned long height = var->height, width = var->width;
+ int i;
+ u8 edid[128];
+
+ /* Read EDID */
+ pr_debug("Read back EDID code:");
+ for (i = 0; i < 128; i++) {
+ edid[i] = hdmi_read(hdmi, HDMI_EDID_KSV_FIFO_ACCESS_WINDOW);
+#ifdef DEBUG
+ if ((i % 16) == 0) {
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "%02X | %02X", i, edid[i]);
+ } else {
+ printk(KERN_CONT " %02X", edid[i]);
+ }
+#endif
+ }
+#ifdef DEBUG
+ printk(KERN_CONT "\n");
+#endif
+ fb_parse_edid(edid, var);
+ pr_debug("%u-%u-%u-%u x %u-%u-%u-%u @ %lu kHz monitor detected\n",
+ var->left_margin, var->xres, var->right_margin, var->hsync_len,
+ var->upper_margin, var->yres, var->lower_margin, var->vsync_len,
+ PICOS2KHZ(var->pixclock));
+
+ /* FIXME: Use user-provided configuration instead of EDID */
+ var->width = width;
+ var->xres = lcd_cfg->xres;
+ var->xres_virtual = lcd_cfg->xres;
+ var->left_margin = lcd_cfg->left_margin;
+ var->right_margin = lcd_cfg->right_margin;
+ var->hsync_len = lcd_cfg->hsync_len;
+ var->height = height;
+ var->yres = lcd_cfg->yres;
+ var->yres_virtual = lcd_cfg->yres * 2;
+ var->upper_margin = lcd_cfg->upper_margin;
+ var->lower_margin = lcd_cfg->lower_margin;
+ var->vsync_len = lcd_cfg->vsync_len;
+ var->sync = lcd_cfg->sync;
+ var->pixclock = lcd_cfg->pixclock;
+
+ hdmi_external_video_param(hdmi);
+}
+
+static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
+{
+ struct sh_hdmi *hdmi = dev_id;
+ u8 status1, status2, mask1, mask2;
+
+ /* mode_b and PLLA and PLLB reset */
+ hdmi_write(hdmi, 0x2C, HDMI_SYSTEM_CTRL);
+
+ /* How long shall reset be held? */
+ udelay(10);
+
+ /* mode_b and PLLA and PLLB reset release */
+ hdmi_write(hdmi, 0x20, HDMI_SYSTEM_CTRL);
+
+ status1 = hdmi_read(hdmi, HDMI_INTERRUPT_STATUS_1);
+ status2 = hdmi_read(hdmi, HDMI_INTERRUPT_STATUS_2);
+
+ mask1 = hdmi_read(hdmi, HDMI_INTERRUPT_MASK_1);
+ mask2 = hdmi_read(hdmi, HDMI_INTERRUPT_MASK_2);
+
+ /* Correct would be to ack only set bits, but the datasheet requires 0xff */
+ hdmi_write(hdmi, 0xFF, HDMI_INTERRUPT_STATUS_1);
+ hdmi_write(hdmi, 0xFF, HDMI_INTERRUPT_STATUS_2);
+
+ if (printk_ratelimit())
+ pr_debug("IRQ #%d: Status #1: 0x%x & 0x%x, #2: 0x%x & 0x%x\n",
+ irq, status1, mask1, status2, mask2);
+
+ if (!((status1 & mask1) | (status2 & mask2))) {
+ return IRQ_NONE;
+ } else if (status1 & 0xc0) {
+ u8 msens;
+
+ /* Datasheet specifies 10ms... */
+ udelay(500);
+
+ msens = hdmi_read(hdmi, HDMI_HOT_PLUG_MSENS_STATUS);
+ pr_debug("MSENS 0x%x\n", msens);
+ /* Check, if hot plug & MSENS pin status are both high */
+ if ((msens & 0xC0) == 0xC0) {
+ /* Display plug in */
+ hdmi->hp_state = HDMI_HOTPLUG_CONNECTED;
+
+ /* Set EDID word address */
+ hdmi_write(hdmi, 0x00, HDMI_EDID_WORD_ADDRESS);
+ /* Set EDID segment pointer */
+ hdmi_write(hdmi, 0x00, HDMI_EDID_SEGMENT_POINTER);
+ /* Enable EDID interrupt */
+ hdmi_write(hdmi, 0xC6, HDMI_INTERRUPT_MASK_1);
+ } else if (!(status1 & 0x80)) {
+ /* Display unplug, beware multiple interrupts */
+ if (hdmi->hp_state != HDMI_HOTPLUG_DISCONNECTED)
+ schedule_delayed_work(&hdmi->edid_work, 0);
+
+ hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED;
+ /* display_off will switch back to mode_a */
+ }
+ } else if (status1 & 2) {
+ /* EDID error interrupt: retry */
+ /* Set EDID word address */
+ hdmi_write(hdmi, 0x00, HDMI_EDID_WORD_ADDRESS);
+ /* Set EDID segment pointer */
+ hdmi_write(hdmi, 0x00, HDMI_EDID_SEGMENT_POINTER);
+ } else if (status1 & 4) {
+ /* Disable EDID interrupt */
+ hdmi_write(hdmi, 0xC0, HDMI_INTERRUPT_MASK_1);
+ hdmi->hp_state = HDMI_HOTPLUG_EDID_DONE;
+ schedule_delayed_work(&hdmi->edid_work, msecs_to_jiffies(10));
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void hdmi_display_on(void *arg, struct fb_info *info)
+{
+ struct sh_hdmi *hdmi = arg;
+ struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+
+ if (info->var.xres != 1280 || info->var.yres != 720) {
+ dev_warn(info->device, "Unsupported framebuffer geometry %ux%u\n",
+ info->var.xres, info->var.yres);
+ return;
+ }
+
+ pr_debug("%s(%p): state %x\n", __func__, pdata->lcd_dev, info->state);
+ /*
+ * FIXME: not a good place to store fb_info. And we cannot nullify it
+ * even on monitor disconnect. What should the lifecycle be?
+ */
+ hdmi->info = info;
+ switch (hdmi->hp_state) {
+ case HDMI_HOTPLUG_EDID_DONE:
+ /* PS mode d->e. All functions are active */
+ hdmi_write(hdmi, 0x80, HDMI_SYSTEM_CTRL);
+ pr_debug("HDMI running\n");
+ break;
+ case HDMI_HOTPLUG_DISCONNECTED:
+ info->state = FBINFO_STATE_SUSPENDED;
+ default:
+ hdmi->var = info->var;
+ }
+}
+
+static void hdmi_display_off(void *arg)
+{
+ struct sh_hdmi *hdmi = arg;
+ struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+
+ pr_debug("%s(%p)\n", __func__, pdata->lcd_dev);
+ /* PS mode e->a */
+ hdmi_write(hdmi, 0x10, HDMI_SYSTEM_CTRL);
+}
+
+/* Hotplug interrupt occurred, read EDID */
+static void edid_work_fn(struct work_struct *work)
+{
+ struct sh_hdmi *hdmi = container_of(work, struct sh_hdmi, edid_work.work);
+ struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+
+ pr_debug("%s(%p): begin, hotplug status %d\n", __func__,
+ pdata->lcd_dev, hdmi->hp_state);
+
+ if (!pdata->lcd_dev)
+ return;
+
+ if (hdmi->hp_state == HDMI_HOTPLUG_EDID_DONE) {
+ pm_runtime_get_sync(hdmi->dev);
+ /* A device has been plugged in */
+ sh_hdmi_read_edid(hdmi);
+ msleep(10);
+ sh_hdmi_configure(hdmi);
+ /* Switched to another (d) power-save mode */
+ msleep(10);
+
+ if (!hdmi->info)
+ return;
+
+ acquire_console_sem();
+
+ /* HDMI plug in */
+ hdmi->info->var = hdmi->var;
+ if (hdmi->info->state != FBINFO_STATE_RUNNING)
+ fb_set_suspend(hdmi->info, 0);
+ else
+ hdmi_display_on(hdmi, hdmi->info);
+
+ release_console_sem();
+ } else {
+ if (!hdmi->info)
+ return;
+
+ acquire_console_sem();
+
+ /* HDMI disconnect */
+ fb_set_suspend(hdmi->info, 1);
+
+ release_console_sem();
+ pm_runtime_put(hdmi->dev);
+ }
+
+ pr_debug("%s(%p): end\n", __func__, pdata->lcd_dev);
+}
+
+static int __init sh_hdmi_probe(struct platform_device *pdev)
+{
+ struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int irq = platform_get_irq(pdev, 0), ret;
+ struct sh_hdmi *hdmi;
+ long rate;
+
+ if (!res || !pdata || irq < 0)
+ return -ENODEV;
+
+ hdmi = kzalloc(sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi) {
+ dev_err(&pdev->dev, "Cannot allocate device data\n");
+ return -ENOMEM;
+ }
+
+ hdmi->dev = &pdev->dev;
+
+ hdmi->hdmi_clk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(hdmi->hdmi_clk)) {
+ ret = PTR_ERR(hdmi->hdmi_clk);
+ dev_err(&pdev->dev, "Unable to get clock: %d\n", ret);
+ goto egetclk;
+ }
+
+ rate = PICOS2KHZ(pdata->lcd_chan->lcd_cfg.pixclock) * 1000;
+
+ rate = clk_round_rate(hdmi->hdmi_clk, rate);
+ if (rate < 0) {
+ ret = rate;
+ dev_err(&pdev->dev, "Cannot get suitable rate: %ld\n", rate);
+ goto erate;
+ }
+
+ ret = clk_set_rate(hdmi->hdmi_clk, rate);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot set rate %ld: %d\n", rate, ret);
+ goto erate;
+ }
+
+ pr_debug("HDMI set frequency %lu\n", rate);
+
+ ret = clk_enable(hdmi->hdmi_clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot enable clock: %d\n", ret);
+ goto eclkenable;
+ }
+
+ dev_info(&pdev->dev, "Enabled HDMI clock at %luHz\n", rate);
+
+ if (!request_mem_region(res->start, resource_size(res), dev_name(&pdev->dev))) {
+ dev_err(&pdev->dev, "HDMI register region already claimed\n");
+ ret = -EBUSY;
+ goto ereqreg;
+ }
+
+ hdmi->base = ioremap(res->start, resource_size(res));
+ if (!hdmi->base) {
+ dev_err(&pdev->dev, "HDMI register region already claimed\n");
+ ret = -ENOMEM;
+ goto emap;
+ }
+
+ platform_set_drvdata(pdev, hdmi);
+
+#if 1
+ /* Product and revision IDs are 0 in sh-mobile version */
+ dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
+ hdmi_read(hdmi, HDMI_PRODUCT_ID), hdmi_read(hdmi, HDMI_REVISION_ID));
+#endif
+
+ /* Set up LCDC callbacks */
+ pdata->lcd_chan->board_cfg.board_data = hdmi;
+ pdata->lcd_chan->board_cfg.display_on = hdmi_display_on;
+ pdata->lcd_chan->board_cfg.display_off = hdmi_display_off;
+
+ INIT_DELAYED_WORK(&hdmi->edid_work, edid_work_fn);
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_resume(&pdev->dev);
+
+ ret = request_irq(irq, sh_hdmi_hotplug, 0,
+ dev_name(&pdev->dev), hdmi);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Unable to request irq: %d\n", ret);
+ goto ereqirq;
+ }
+
+ return 0;
+
+ereqirq:
+ pm_runtime_disable(&pdev->dev);
+ iounmap(hdmi->base);
+emap:
+ release_mem_region(res->start, resource_size(res));
+ereqreg:
+ clk_disable(hdmi->hdmi_clk);
+eclkenable:
+erate:
+ clk_put(hdmi->hdmi_clk);
+egetclk:
+ kfree(hdmi);
+
+ return ret;
+}
+
+static int __exit sh_hdmi_remove(struct platform_device *pdev)
+{
+ struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
+ struct sh_hdmi *hdmi = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int irq = platform_get_irq(pdev, 0);
+
+ pdata->lcd_chan->board_cfg.display_on = NULL;
+ pdata->lcd_chan->board_cfg.display_off = NULL;
+ pdata->lcd_chan->board_cfg.board_data = NULL;
+
+ free_irq(irq, hdmi);
+ pm_runtime_disable(&pdev->dev);
+ cancel_delayed_work_sync(&hdmi->edid_work);
+ clk_disable(hdmi->hdmi_clk);
+ clk_put(hdmi->hdmi_clk);
+ iounmap(hdmi->base);
+ release_mem_region(res->start, resource_size(res));
+ kfree(hdmi);
+
+ return 0;
+}
+
+static struct platform_driver sh_hdmi_driver = {
+ .remove = __exit_p(sh_hdmi_remove),
+ .driver = {
+ .name = "sh-mobile-hdmi",
+ },
+};
+
+static int __init sh_hdmi_init(void)
+{
+ return platform_driver_probe(&sh_hdmi_driver, sh_hdmi_probe);
+}
+module_init(sh_hdmi_init);
+
+static void __exit sh_hdmi_exit(void)
+{
+ platform_driver_unregister(&sh_hdmi_driver);
+}
+module_exit(sh_hdmi_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_DESCRIPTION("SuperH / ARM-shmobile HDMI driver");
+MODULE_LICENSE("GPL v2");
/* per-channel registers */
enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
LDSM2R, LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR,
+ LDHAJR,
NR_CH_REGS };
static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
[LDVLNR] = 0x450,
[LDVSYNR] = 0x454,
[LDPMR] = 0x460,
+ [LDHAJR] = 0x4a0,
};
static unsigned long lcdc_offs_sublcd[NR_CH_REGS] = {
struct clk *dot_clk;
unsigned long lddckr;
struct sh_mobile_lcdc_chan ch[2];
+ struct notifier_block notifier;
unsigned long saved_shared_regs[NR_SHARED_REGS];
int started;
};
lcdc_write(priv, _LDDCKSTPR, 1); /* stop dotclock */
}
+static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
+{
+ struct fb_var_screeninfo *var = &ch->info->var;
+ unsigned long h_total, hsync_pos;
+ u32 tmp;
+
+ tmp = ch->ldmt1r_value;
+ tmp |= (var->sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1 << 28;
+ tmp |= (var->sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1 << 27;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DWPOL) ? 1 << 26 : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DIPOL) ? 1 << 25 : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DAPOL) ? 1 << 24 : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_HSCNT) ? 1 << 17 : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DWCNT) ? 1 << 16 : 0;
+ lcdc_write_chan(ch, LDMT1R, tmp);
+
+ /* setup SYS bus */
+ lcdc_write_chan(ch, LDMT2R, ch->cfg.sys_bus_cfg.ldmt2r);
+ lcdc_write_chan(ch, LDMT3R, ch->cfg.sys_bus_cfg.ldmt3r);
+
+ /* horizontal configuration */
+ h_total = var->xres + var->hsync_len +
+ var->left_margin + var->right_margin;
+ tmp = h_total / 8; /* HTCN */
+ tmp |= (var->xres / 8) << 16; /* HDCN */
+ lcdc_write_chan(ch, LDHCNR, tmp);
+
+ hsync_pos = var->xres + var->right_margin;
+ tmp = hsync_pos / 8; /* HSYNP */
+ tmp |= (var->hsync_len / 8) << 16; /* HSYNW */
+ lcdc_write_chan(ch, LDHSYNR, tmp);
+
+ /* vertical configuration */
+ tmp = var->yres + var->vsync_len +
+ var->upper_margin + var->lower_margin; /* VTLN */
+ tmp |= var->yres << 16; /* VDLN */
+ lcdc_write_chan(ch, LDVLNR, tmp);
+
+ tmp = var->yres + var->lower_margin; /* VSYNP */
+ tmp |= var->vsync_len << 16; /* VSYNW */
+ lcdc_write_chan(ch, LDVSYNR, tmp);
+
+ /* Adjust horizontal synchronisation for HDMI */
+ tmp = ((var->xres & 7) << 24) |
+ ((h_total & 7) << 16) |
+ ((var->hsync_len & 7) << 8) |
+ hsync_pos;
+ lcdc_write_chan(ch, LDHAJR, tmp);
+}
+
static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
{
struct sh_mobile_lcdc_chan *ch;
if (!ch->enabled)
continue;
- tmp = ch->ldmt1r_value;
- tmp |= (lcd_cfg->sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1 << 28;
- tmp |= (lcd_cfg->sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1 << 27;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DWPOL) ? 1 << 26 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DIPOL) ? 1 << 25 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DAPOL) ? 1 << 24 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_HSCNT) ? 1 << 17 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DWCNT) ? 1 << 16 : 0;
- lcdc_write_chan(ch, LDMT1R, tmp);
-
- /* setup SYS bus */
- lcdc_write_chan(ch, LDMT2R, ch->cfg.sys_bus_cfg.ldmt2r);
- lcdc_write_chan(ch, LDMT3R, ch->cfg.sys_bus_cfg.ldmt3r);
-
- /* horizontal configuration */
- tmp = lcd_cfg->xres + lcd_cfg->hsync_len;
- tmp += lcd_cfg->left_margin;
- tmp += lcd_cfg->right_margin;
- tmp /= 8; /* HTCN */
- tmp |= (lcd_cfg->xres / 8) << 16; /* HDCN */
- lcdc_write_chan(ch, LDHCNR, tmp);
-
- tmp = lcd_cfg->xres;
- tmp += lcd_cfg->right_margin;
- tmp /= 8; /* HSYNP */
- tmp |= (lcd_cfg->hsync_len / 8) << 16; /* HSYNW */
- lcdc_write_chan(ch, LDHSYNR, tmp);
+ sh_mobile_lcdc_geometry(ch);
/* power supply */
lcdc_write_chan(ch, LDPMR, 0);
- /* vertical configuration */
- tmp = lcd_cfg->yres + lcd_cfg->vsync_len;
- tmp += lcd_cfg->upper_margin;
- tmp += lcd_cfg->lower_margin; /* VTLN */
- tmp |= lcd_cfg->yres << 16; /* VDLN */
- lcdc_write_chan(ch, LDVLNR, tmp);
-
- tmp = lcd_cfg->yres;
- tmp += lcd_cfg->lower_margin; /* VSYNP */
- tmp |= lcd_cfg->vsync_len << 16; /* VSYNW */
- lcdc_write_chan(ch, LDVSYNR, tmp);
-
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->setup_sys)
ret = board_cfg->setup_sys(board_cfg->board_data, ch,
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->display_on)
- board_cfg->display_on(board_cfg->board_data);
+ board_cfg->display_on(board_cfg->board_data, ch->info);
}
return 0;
.runtime_resume = sh_mobile_lcdc_runtime_resume,
};
+static int sh_mobile_lcdc_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct fb_event *event = data;
+ struct fb_info *info = event->info;
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ struct sh_mobile_lcdc_board_cfg *board_cfg = &ch->cfg.board_cfg;
+ struct fb_var_screeninfo *var;
+
+ if (&ch->lcdc->notifier != nb)
+ return 0;
+
+ dev_dbg(info->dev, "%s(): action = %lu, data = %p\n",
+ __func__, action, event->data);
+
+ switch(action) {
+ case FB_EVENT_SUSPEND:
+ if (board_cfg->display_off)
+ board_cfg->display_off(board_cfg->board_data);
+ pm_runtime_put(info->device);
+ break;
+ case FB_EVENT_RESUME:
+ var = &info->var;
+
+ /* HDMI must be enabled before LCDC configuration */
+ if (board_cfg->display_on)
+ board_cfg->display_on(board_cfg->board_data, ch->info);
+
+ /* Check if the new display is not in our modelist */
+ if (ch->info->modelist.next &&
+ !fb_match_mode(var, &ch->info->modelist)) {
+ struct fb_videomode mode;
+ int ret;
+
+ /* Can we handle this display? */
+ if (var->xres > ch->cfg.lcd_cfg.xres ||
+ var->yres > ch->cfg.lcd_cfg.yres)
+ return -ENOMEM;
+
+ /* Add to the modelist */
+ fb_var_to_videomode(&mode, var);
+ ret = fb_add_videomode(&mode, &ch->info->modelist);
+ if (ret < 0)
+ return ret;
+ }
+
+ pm_runtime_get_sync(info->device);
+
+ sh_mobile_lcdc_geometry(ch);
+
+ break;
+ }
+
+ return 0;
+}
+
static int sh_mobile_lcdc_remove(struct platform_device *pdev);
static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
goto err1;
}
+ priv->base = ioremap_nocache(res->start, resource_size(res));
+ if (!priv->base)
+ goto err1;
+
error = sh_mobile_lcdc_setup_clocks(pdev, pdata->clock_source, priv);
if (error) {
dev_err(&pdev->dev, "unable to setup clocks\n");
goto err1;
}
- priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1);
-
for (i = 0; i < j; i++) {
+ struct fb_var_screeninfo *var;
+ struct fb_videomode *lcd_cfg;
cfg = &priv->ch[i].cfg;
priv->ch[i].info = framebuffer_alloc(0, &pdev->dev);
}
info = priv->ch[i].info;
+ var = &info->var;
+ lcd_cfg = &cfg->lcd_cfg;
info->fbops = &sh_mobile_lcdc_ops;
- info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
- info->var.yres = cfg->lcd_cfg.yres;
+ var->xres = var->xres_virtual = lcd_cfg->xres;
+ var->yres = lcd_cfg->yres;
/* Default Y virtual resolution is 2x panel size */
- info->var.yres_virtual = info->var.yres * 2;
- info->var.width = cfg->lcd_size_cfg.width;
- info->var.height = cfg->lcd_size_cfg.height;
- info->var.activate = FB_ACTIVATE_NOW;
- error = sh_mobile_lcdc_set_bpp(&info->var, cfg->bpp);
+ var->yres_virtual = var->yres * 2;
+ var->width = cfg->lcd_size_cfg.width;
+ var->height = cfg->lcd_size_cfg.height;
+ var->activate = FB_ACTIVATE_NOW;
+ var->left_margin = lcd_cfg->left_margin;
+ var->right_margin = lcd_cfg->right_margin;
+ var->upper_margin = lcd_cfg->upper_margin;
+ var->lower_margin = lcd_cfg->lower_margin;
+ var->hsync_len = lcd_cfg->hsync_len;
+ var->vsync_len = lcd_cfg->vsync_len;
+ var->sync = lcd_cfg->sync;
+ var->pixclock = lcd_cfg->pixclock;
+
+ error = sh_mobile_lcdc_set_bpp(var, cfg->bpp);
if (error)
break;
info->fix = sh_mobile_lcdc_fix;
- info->fix.line_length = cfg->lcd_cfg.xres * (cfg->bpp / 8);
+ info->fix.line_length = lcd_cfg->xres * (cfg->bpp / 8);
info->fix.smem_len = info->fix.line_length *
- info->var.yres_virtual;
+ var->yres_virtual;
buf = dma_alloc_coherent(&pdev->dev, info->fix.smem_len,
&priv->ch[i].dma_handle, GFP_KERNEL);
ch->cfg.bpp);
/* deferred io mode: disable clock to save power */
- if (info->fbdefio)
+ if (info->fbdefio || info->state == FBINFO_STATE_SUSPENDED)
sh_mobile_lcdc_clk_off(priv);
}
+ /* Failure ignored */
+ priv->notifier.notifier_call = sh_mobile_lcdc_notify;
+ fb_register_client(&priv->notifier);
+
return 0;
err1:
sh_mobile_lcdc_remove(pdev);
struct fb_info *info;
int i;
+ fb_unregister_client(&priv->notifier);
+
for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
if (priv->ch[i].info && priv->ch[i].info->dev)
unregister_framebuffer(priv->ch[i].info);
return 0;
}
-static int __devinit gfb_probe(struct of_device *op,
+static int __devinit gfb_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
return err;
}
-static int __devexit gfb_remove(struct of_device *op)
+static int __devexit gfb_remove(struct platform_device *op)
{
struct fb_info *info = dev_get_drvdata(&op->dev);
struct gfb_info *gp = info->par;
info->fix.accel = FB_ACCEL_SUN_TCX;
}
-static void tcx_unmap_regs(struct of_device *op, struct fb_info *info,
+static void tcx_unmap_regs(struct platform_device *op, struct fb_info *info,
struct tcx_par *par)
{
if (par->tec)
info->screen_base, info->fix.smem_len);
}
-static int __devinit tcx_probe(struct of_device *op,
+static int __devinit tcx_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *dp = op->dev.of_node;
return err;
}
-static int __devexit tcx_remove(struct of_device *op)
+static int __devexit tcx_remove(struct platform_device *op)
{
struct fb_info *info = dev_get_drvdata(&op->dev);
struct tcx_par *par = info->par;
module_exit(uvesafb_exit);
-#define param_get_scroll NULL
-static int param_set_scroll(const char *val, struct kernel_param *kp)
+static int param_set_scroll(const char *val, const struct kernel_param *kp)
{
ypan = 0;
return 0;
}
-
+static struct kernel_param_ops param_ops_scroll = {
+ .set = param_set_scroll,
+};
#define param_check_scroll(name, p) __param_check(name, p, void)
module_param_named(scroll, ypan, scroll, 0);
/* Prepare startup mode */
+ kparam_block_sysfs_write(mode_option);
rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
+ kparam_unblock_sysfs_write(mode_option);
if (! ((rc == 1) || (rc == 2))) {
rc = -EINVAL;
dev_err(info->device, "mode %s not found\n", mode_option);
*/
static int __devinit
-xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
+xilinxfb_of_probe(struct platform_device *op, const struct of_device_id *match)
{
const u32 *prop;
u32 *p;
return -ENODEV;
}
-static int __devexit xilinxfb_of_remove(struct of_device *op)
+static int __devexit xilinxfb_of_remove(struct platform_device *op)
{
return xilinxfb_release(&op->dev);
}
# ARM Architecture
+config ARM_SP805_WATCHDOG
+ tristate "ARM SP805 Watchdog"
+ depends on ARM_AMBA
+ help
+ ARM Primecell SP805 Watchdog timer. This will reboot your system when
+ the timeout is reached.
+
config AT91RM9200_WATCHDOG
tristate "AT91RM9200 watchdog"
depends on ARCH_AT91RM9200
Most people will say N.
+config F71808E_WDT
+ tristate "Fintek F71808E and F71882FG Watchdog"
+ depends on X86 && EXPERIMENTAL
+ help
+ This is the driver for the hardware watchdog on the Fintek
+ F71808E and F71882FG Super I/O controllers.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called f71808e_wdt.
+
+
config GEODE_WDT
tristate "AMD Geode CS5535/CS5536 Watchdog"
depends on CS5535_MFGPT
be called it87_wdt.
config HP_WATCHDOG
- tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
+ tristate "HP Proliant iLO2+ Hardware Watchdog Timer"
depends on X86
help
A software monitoring watchdog and NMI sourcing driver. This driver
- will detect lockups and provide stack trace. Also, when an NMI
- occurs this driver will make the necessary BIOS calls to log
- the cause of the NMI. This is a driver that will only load on a
- HP ProLiant system with a minimum of iLO2 support.
- To compile this driver as a module, choose M here: the
- module will be called hpwdt.
+ will detect lockups and provide a stack trace. This is a driver that
+ will only load on a HP ProLiant system with a minimum of iLO2 support.
+ To compile this driver as a module, choose M here: the module will be
+ called hpwdt.
+
+config HPWDT_NMI_DECODING
+ bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
+ depends on HP_WATCHDOG
+ help
+ When an NMI occurs this feature will make the necessary BIOS calls to
+ log the cause of the NMI.
config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
# ALPHA Architecture
# ARM Architecture
+obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o
obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
+obj-$(CONFIG_F71808E_WDT) += f71808e_wdt.o
obj-$(CONFIG_GEODE_WDT) += geodewdt.o
obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
obj-$(CONFIG_SBC_FITPC2_WATCHDOG) += sbc_fitpc2_wdt.o
.release = cpwd_release,
};
-static int __devinit cpwd_probe(struct of_device *op,
+static int __devinit cpwd_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct device_node *options;
goto out;
}
-static int __devexit cpwd_remove(struct of_device *op)
+static int __devexit cpwd_remove(struct platform_device *op)
{
struct cpwd *p = dev_get_drvdata(&op->dev);
int i;
--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> *
+ * Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com> *
+ * Copyright (C) 2010 Giel van Schijndel <me@mortis.eu> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+#define DRVNAME "f71808e_wdt"
+
+#define SIO_F71808FG_LD_WDT 0x07 /* Watchdog timer logical device */
+#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */
+#define SIO_LOCK_KEY 0xAA /* Key to diasble Super-I/O */
+
+#define SIO_REG_LDSEL 0x07 /* Logical device select */
+#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
+#define SIO_REG_DEVREV 0x22 /* Device revision */
+#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
+#define SIO_REG_ENABLE 0x30 /* Logical device enable */
+#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
+
+#define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */
+#define SIO_F71808_ID 0x0901 /* Chipset ID */
+#define SIO_F71858_ID 0x0507 /* Chipset ID */
+#define SIO_F71862_ID 0x0601 /* Chipset ID */
+#define SIO_F71882_ID 0x0541 /* Chipset ID */
+#define SIO_F71889_ID 0x0723 /* Chipset ID */
+
+#define F71882FG_REG_START 0x01
+
+#define F71808FG_REG_WDO_CONF 0xf0
+#define F71808FG_REG_WDT_CONF 0xf5
+#define F71808FG_REG_WD_TIME 0xf6
+
+#define F71808FG_FLAG_WDOUT_EN 7
+
+#define F71808FG_FLAG_WDTMOUT_STS 5
+#define F71808FG_FLAG_WD_EN 5
+#define F71808FG_FLAG_WD_PULSE 4
+#define F71808FG_FLAG_WD_UNIT 3
+
+/* Default values */
+#define WATCHDOG_TIMEOUT 60 /* 1 minute default timeout */
+#define WATCHDOG_MAX_TIMEOUT (60 * 255)
+#define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for
+ watchdog signal */
+
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
+
+static const int max_timeout = WATCHDOG_MAX_TIMEOUT;
+static int timeout = 60; /* default timeout in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+ "Watchdog timeout in seconds. 1<= timeout <="
+ __MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default="
+ __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH;
+module_param(pulse_width, uint, 0);
+MODULE_PARM_DESC(pulse_width,
+ "Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms"
+ " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0444);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+static unsigned int start_withtimeout;
+module_param(start_withtimeout, uint, 0);
+MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
+ " given initial timeout. Zero (default) disables this feature.");
+
+enum chips { f71808fg, f71858fg, f71862fg, f71882fg, f71889fg };
+
+static const char *f71808e_names[] = {
+ "f71808fg",
+ "f71858fg",
+ "f71862fg",
+ "f71882fg",
+ "f71889fg",
+};
+
+/* Super-I/O Function prototypes */
+static inline int superio_inb(int base, int reg);
+static inline int superio_inw(int base, int reg);
+static inline void superio_outb(int base, int reg, u8 val);
+static inline void superio_set_bit(int base, int reg, int bit);
+static inline void superio_clear_bit(int base, int reg, int bit);
+static inline int superio_enter(int base);
+static inline void superio_select(int base, int ld);
+static inline void superio_exit(int base);
+
+struct watchdog_data {
+ unsigned short sioaddr;
+ enum chips type;
+ unsigned long opened;
+ struct mutex lock;
+ char expect_close;
+ struct watchdog_info ident;
+
+ unsigned short timeout;
+ u8 timer_val; /* content for the wd_time register */
+ char minutes_mode;
+ u8 pulse_val; /* pulse width flag */
+ char pulse_mode; /* enable pulse output mode? */
+ char caused_reboot; /* last reboot was by the watchdog */
+};
+
+static struct watchdog_data watchdog = {
+ .lock = __MUTEX_INITIALIZER(watchdog.lock),
+};
+
+/* Super I/O functions */
+static inline int superio_inb(int base, int reg)
+{
+ outb(reg, base);
+ return inb(base + 1);
+}
+
+static int superio_inw(int base, int reg)
+{
+ int val;
+ val = superio_inb(base, reg) << 8;
+ val |= superio_inb(base, reg + 1);
+ return val;
+}
+
+static inline void superio_outb(int base, int reg, u8 val)
+{
+ outb(reg, base);
+ outb(val, base + 1);
+}
+
+static inline void superio_set_bit(int base, int reg, int bit)
+{
+ unsigned long val = superio_inb(base, reg);
+ __set_bit(bit, &val);
+ superio_outb(base, reg, val);
+}
+
+static inline void superio_clear_bit(int base, int reg, int bit)
+{
+ unsigned long val = superio_inb(base, reg);
+ __clear_bit(bit, &val);
+ superio_outb(base, reg, val);
+}
+
+static inline int superio_enter(int base)
+{
+ /* Don't step on other drivers' I/O space by accident */
+ if (!request_muxed_region(base, 2, DRVNAME)) {
+ printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
+ (int)base);
+ return -EBUSY;
+ }
+
+ /* according to the datasheet the key must be send twice! */
+ outb(SIO_UNLOCK_KEY, base);
+ outb(SIO_UNLOCK_KEY, base);
+
+ return 0;
+}
+
+static inline void superio_select(int base, int ld)
+{
+ outb(SIO_REG_LDSEL, base);
+ outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+ outb(SIO_LOCK_KEY, base);
+ release_region(base, 2);
+}
+
+static int watchdog_set_timeout(int timeout)
+{
+ if (timeout <= 0
+ || timeout > max_timeout) {
+ printk(KERN_ERR DRVNAME ": watchdog timeout out of range\n");
+ return -EINVAL;
+ }
+
+ mutex_lock(&watchdog.lock);
+
+ watchdog.timeout = timeout;
+ if (timeout > 0xff) {
+ watchdog.timer_val = DIV_ROUND_UP(timeout, 60);
+ watchdog.minutes_mode = true;
+ } else {
+ watchdog.timer_val = timeout;
+ watchdog.minutes_mode = false;
+ }
+
+ mutex_unlock(&watchdog.lock);
+
+ return 0;
+}
+
+static int watchdog_set_pulse_width(unsigned int pw)
+{
+ int err = 0;
+
+ mutex_lock(&watchdog.lock);
+
+ if (pw <= 1) {
+ watchdog.pulse_val = 0;
+ } else if (pw <= 25) {
+ watchdog.pulse_val = 1;
+ } else if (pw <= 125) {
+ watchdog.pulse_val = 2;
+ } else if (pw <= 5000) {
+ watchdog.pulse_val = 3;
+ } else {
+ printk(KERN_ERR DRVNAME ": pulse width out of range\n");
+ err = -EINVAL;
+ goto exit_unlock;
+ }
+
+ watchdog.pulse_mode = pw;
+
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+ return err;
+}
+
+static int watchdog_keepalive(void)
+{
+ int err = 0;
+
+ mutex_lock(&watchdog.lock);
+ err = superio_enter(watchdog.sioaddr);
+ if (err)
+ goto exit_unlock;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ if (watchdog.minutes_mode)
+ /* select minutes for timer units */
+ superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_UNIT);
+ else
+ /* select seconds for timer units */
+ superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_UNIT);
+
+ /* Set timer value */
+ superio_outb(watchdog.sioaddr, F71808FG_REG_WD_TIME,
+ watchdog.timer_val);
+
+ superio_exit(watchdog.sioaddr);
+
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+ return err;
+}
+
+static int watchdog_start(void)
+{
+ /* Make sure we don't die as soon as the watchdog is enabled below */
+ int err = watchdog_keepalive();
+ if (err)
+ return err;
+
+ mutex_lock(&watchdog.lock);
+ err = superio_enter(watchdog.sioaddr);
+ if (err)
+ goto exit_unlock;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ /* Watchdog pin configuration */
+ switch (watchdog.type) {
+ case f71808fg:
+ /* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */
+ superio_clear_bit(watchdog.sioaddr, 0x2a, 3);
+ superio_clear_bit(watchdog.sioaddr, 0x2b, 3);
+ break;
+
+ case f71882fg:
+ /* Set pin 56 to WDTRST# */
+ superio_set_bit(watchdog.sioaddr, 0x29, 1);
+ break;
+
+ default:
+ /*
+ * 'default' label to shut up the compiler and catch
+ * programmer errors
+ */
+ err = -ENODEV;
+ goto exit_superio;
+ }
+
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+ superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0);
+ superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDO_CONF,
+ F71808FG_FLAG_WDOUT_EN);
+
+ superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_EN);
+
+ if (watchdog.pulse_mode) {
+ /* Select "pulse" output mode with given duration */
+ u8 wdt_conf = superio_inb(watchdog.sioaddr,
+ F71808FG_REG_WDT_CONF);
+
+ /* Set WD_PSWIDTH bits (1:0) */
+ wdt_conf = (wdt_conf & 0xfc) | (watchdog.pulse_val & 0x03);
+ /* Set WD_PULSE to "pulse" mode */
+ wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE);
+
+ superio_outb(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ wdt_conf);
+ } else {
+ /* Select "level" output mode */
+ superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_PULSE);
+ }
+
+exit_superio:
+ superio_exit(watchdog.sioaddr);
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+
+ return err;
+}
+
+static int watchdog_stop(void)
+{
+ int err = 0;
+
+ mutex_lock(&watchdog.lock);
+ err = superio_enter(watchdog.sioaddr);
+ if (err)
+ goto exit_unlock;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_EN);
+
+ superio_exit(watchdog.sioaddr);
+
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+
+ return err;
+}
+
+static int watchdog_get_status(void)
+{
+ int status = 0;
+
+ mutex_lock(&watchdog.lock);
+ status = (watchdog.caused_reboot) ? WDIOF_CARDRESET : 0;
+ mutex_unlock(&watchdog.lock);
+
+ return status;
+}
+
+static bool watchdog_is_running(void)
+{
+ /*
+ * if we fail to determine the watchdog's status assume it to be
+ * running to be on the safe side
+ */
+ bool is_running = true;
+
+ mutex_lock(&watchdog.lock);
+ if (superio_enter(watchdog.sioaddr))
+ goto exit_unlock;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ is_running = (superio_inb(watchdog.sioaddr, SIO_REG_ENABLE) & BIT(0))
+ && (superio_inb(watchdog.sioaddr, F71808FG_REG_WDT_CONF)
+ & F71808FG_FLAG_WD_EN);
+
+ superio_exit(watchdog.sioaddr);
+
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+ return is_running;
+}
+
+/* /dev/watchdog api */
+
+static int watchdog_open(struct inode *inode, struct file *file)
+{
+ int err;
+
+ /* If the watchdog is alive we don't need to start it again */
+ if (test_and_set_bit(0, &watchdog.opened))
+ return -EBUSY;
+
+ err = watchdog_start();
+ if (err) {
+ clear_bit(0, &watchdog.opened);
+ return err;
+ }
+
+ if (nowayout)
+ __module_get(THIS_MODULE);
+
+ watchdog.expect_close = 0;
+ return nonseekable_open(inode, file);
+}
+
+static int watchdog_release(struct inode *inode, struct file *file)
+{
+ clear_bit(0, &watchdog.opened);
+
+ if (!watchdog.expect_close) {
+ watchdog_keepalive();
+ printk(KERN_CRIT DRVNAME
+ ": Unexpected close, not stopping watchdog!\n");
+ } else if (!nowayout) {
+ watchdog_stop();
+ }
+ return 0;
+}
+
+/*
+ * watchdog_write:
+ * @file: file handle to the watchdog
+ * @buf: buffer to write
+ * @count: count of bytes
+ * @ppos: pointer to the position to write. No seeks allowed
+ *
+ * A write to a watchdog device is defined as a keepalive signal. Any
+ * write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t watchdog_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ if (count) {
+ if (!nowayout) {
+ size_t i;
+
+ /* In case it was set long ago */
+ bool expect_close = false;
+
+ for (i = 0; i != count; i++) {
+ char c;
+ if (get_user(c, buf + i))
+ return -EFAULT;
+ expect_close = (c == 'V');
+ }
+
+ /* Properly order writes across fork()ed processes */
+ mutex_lock(&watchdog.lock);
+ watchdog.expect_close = expect_close;
+ mutex_unlock(&watchdog.lock);
+ }
+
+ /* someone wrote to us, we should restart timer */
+ watchdog_keepalive();
+ }
+ return count;
+}
+
+/*
+ * watchdog_ioctl:
+ * @inode: inode of the device
+ * @file: file handle to the device
+ * @cmd: watchdog command
+ * @arg: argument pointer
+ *
+ * The watchdog API defines a common set of functions for all watchdogs
+ * according to their available features.
+ */
+static long watchdog_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int status;
+ int new_options;
+ int new_timeout;
+ union {
+ struct watchdog_info __user *ident;
+ int __user *i;
+ } uarg;
+
+ uarg.i = (int __user *)arg;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(uarg.ident, &watchdog.ident,
+ sizeof(watchdog.ident)) ? -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ status = watchdog_get_status();
+ if (status < 0)
+ return status;
+ return put_user(status, uarg.i);
+
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, uarg.i);
+
+ case WDIOC_SETOPTIONS:
+ if (get_user(new_options, uarg.i))
+ return -EFAULT;
+
+ if (new_options & WDIOS_DISABLECARD)
+ watchdog_stop();
+
+ if (new_options & WDIOS_ENABLECARD)
+ return watchdog_start();
+
+
+ case WDIOC_KEEPALIVE:
+ watchdog_keepalive();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_timeout, uarg.i))
+ return -EFAULT;
+
+ if (watchdog_set_timeout(new_timeout))
+ return -EINVAL;
+
+ watchdog_keepalive();
+ /* Fall */
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(watchdog.timeout, uarg.i);
+
+ default:
+ return -ENOTTY;
+
+ }
+}
+
+static int watchdog_notify_sys(struct notifier_block *this, unsigned long code,
+ void *unused)
+{
+ if (code == SYS_DOWN || code == SYS_HALT)
+ watchdog_stop();
+ return NOTIFY_DONE;
+}
+
+static const struct file_operations watchdog_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .open = watchdog_open,
+ .release = watchdog_release,
+ .write = watchdog_write,
+ .unlocked_ioctl = watchdog_ioctl,
+};
+
+static struct miscdevice watchdog_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &watchdog_fops,
+};
+
+static struct notifier_block watchdog_notifier = {
+ .notifier_call = watchdog_notify_sys,
+};
+
+static int __init watchdog_init(int sioaddr)
+{
+ int wdt_conf, err = 0;
+
+ /* No need to lock watchdog.lock here because no entry points
+ * into the module have been registered yet.
+ */
+ watchdog.sioaddr = sioaddr;
+ watchdog.ident.options = WDIOC_SETTIMEOUT
+ | WDIOF_MAGICCLOSE
+ | WDIOF_KEEPALIVEPING;
+
+ snprintf(watchdog.ident.identity,
+ sizeof(watchdog.ident.identity), "%s watchdog",
+ f71808e_names[watchdog.type]);
+
+ err = superio_enter(sioaddr);
+ if (err)
+ return err;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF);
+ watchdog.caused_reboot = wdt_conf & F71808FG_FLAG_WDTMOUT_STS;
+
+ superio_exit(sioaddr);
+
+ err = watchdog_set_timeout(timeout);
+ if (err)
+ return err;
+ err = watchdog_set_pulse_width(pulse_width);
+ if (err)
+ return err;
+
+ err = register_reboot_notifier(&watchdog_notifier);
+ if (err)
+ return err;
+
+ err = misc_register(&watchdog_miscdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME
+ ": cannot register miscdev on minor=%d\n",
+ watchdog_miscdev.minor);
+ goto exit_reboot;
+ }
+
+ if (start_withtimeout) {
+ if (start_withtimeout <= 0
+ || start_withtimeout > max_timeout) {
+ printk(KERN_ERR DRVNAME
+ ": starting timeout out of range\n");
+ err = -EINVAL;
+ goto exit_miscdev;
+ }
+
+ err = watchdog_start();
+ if (err) {
+ printk(KERN_ERR DRVNAME
+ ": cannot start watchdog timer\n");
+ goto exit_miscdev;
+ }
+
+ mutex_lock(&watchdog.lock);
+ err = superio_enter(sioaddr);
+ if (err)
+ goto exit_unlock;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ if (start_withtimeout > 0xff) {
+ /* select minutes for timer units */
+ superio_set_bit(sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_UNIT);
+ superio_outb(sioaddr, F71808FG_REG_WD_TIME,
+ DIV_ROUND_UP(start_withtimeout, 60));
+ } else {
+ /* select seconds for timer units */
+ superio_clear_bit(sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_UNIT);
+ superio_outb(sioaddr, F71808FG_REG_WD_TIME,
+ start_withtimeout);
+ }
+
+ superio_exit(sioaddr);
+ mutex_unlock(&watchdog.lock);
+
+ if (nowayout)
+ __module_get(THIS_MODULE);
+
+ printk(KERN_INFO DRVNAME
+ ": watchdog started with initial timeout of %u sec\n",
+ start_withtimeout);
+ }
+
+ return 0;
+
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+exit_miscdev:
+ misc_deregister(&watchdog_miscdev);
+exit_reboot:
+ unregister_reboot_notifier(&watchdog_notifier);
+
+ return err;
+}
+
+static int __init f71808e_find(int sioaddr)
+{
+ u16 devid;
+ int err = superio_enter(sioaddr);
+ if (err)
+ return err;
+
+ devid = superio_inw(sioaddr, SIO_REG_MANID);
+ if (devid != SIO_FINTEK_ID) {
+ pr_debug(DRVNAME ": Not a Fintek device\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
+ switch (devid) {
+ case SIO_F71808_ID:
+ watchdog.type = f71808fg;
+ break;
+ case SIO_F71882_ID:
+ watchdog.type = f71882fg;
+ break;
+ case SIO_F71862_ID:
+ case SIO_F71889_ID:
+ /* These have a watchdog, though it isn't implemented (yet). */
+ err = -ENOSYS;
+ goto exit;
+ case SIO_F71858_ID:
+ /* Confirmed (by datasheet) not to have a watchdog. */
+ err = -ENODEV;
+ goto exit;
+ default:
+ printk(KERN_INFO DRVNAME ": Unrecognized Fintek device: %04x\n",
+ (unsigned int)devid);
+ err = -ENODEV;
+ goto exit;
+ }
+
+ printk(KERN_INFO DRVNAME ": Found %s watchdog chip, revision %d\n",
+ f71808e_names[watchdog.type],
+ (int)superio_inb(sioaddr, SIO_REG_DEVREV));
+exit:
+ superio_exit(sioaddr);
+ return err;
+}
+
+static int __init f71808e_init(void)
+{
+ static const unsigned short addrs[] = { 0x2e, 0x4e };
+ int err = -ENODEV;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(addrs); i++) {
+ err = f71808e_find(addrs[i]);
+ if (err == 0)
+ break;
+ }
+ if (i == ARRAY_SIZE(addrs))
+ return err;
+
+ return watchdog_init(addrs[i]);
+}
+
+static void __exit f71808e_exit(void)
+{
+ if (watchdog_is_running()) {
+ printk(KERN_WARNING DRVNAME
+ ": Watchdog timer still running, stopping it\n");
+ watchdog_stop();
+ }
+ misc_deregister(&watchdog_miscdev);
+ unregister_reboot_notifier(&watchdog_notifier);
+}
+
+MODULE_DESCRIPTION("F71808E Watchdog Driver");
+MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>");
+MODULE_LICENSE("GPL");
+
+module_init(f71808e_init);
+module_exit(f71808e_exit);
};
-static int __devinit gef_wdt_probe(struct of_device *dev,
+static int __devinit gef_wdt_probe(struct platform_device *dev,
const struct of_device_id *match)
{
int timeout = 10;
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/init.h>
-#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/nmi.h>
+#include <linux/bitops.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
-#include <linux/mm.h>
#include <linux/module.h>
-#include <linux/kdebug.h>
#include <linux/moduleparam.h>
-#include <linux/notifier.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/reboot.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/watchdog.h>
+#ifdef CONFIG_HPWDT_NMI_DECODING
#include <linux/dmi.h>
-#include <linux/efi.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <asm/desc.h>
+#include <linux/spinlock.h>
+#include <linux/nmi.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
#include <asm/cacheflush.h>
+#endif /* CONFIG_HPWDT_NMI_DECODING */
+
+#define HPWDT_VERSION "1.2.0"
+#define SECS_TO_TICKS(secs) ((secs) * 1000 / 128)
+#define TICKS_TO_SECS(ticks) ((ticks) * 128 / 1000)
+#define HPWDT_MAX_TIMER TICKS_TO_SECS(65535)
+#define DEFAULT_MARGIN 30
+
+static unsigned int soft_margin = DEFAULT_MARGIN; /* in seconds */
+static unsigned int reload; /* the computed soft_margin */
+static int nowayout = WATCHDOG_NOWAYOUT;
+static char expect_release;
+static unsigned long hpwdt_is_open;
+
+static void __iomem *pci_mem_addr; /* the PCI-memory address */
+static unsigned long __iomem *hpwdt_timer_reg;
+static unsigned long __iomem *hpwdt_timer_con;
+static struct pci_device_id hpwdt_devices[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) }, /* iLO2 */
+ { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) }, /* iLO3 */
+ {0}, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, hpwdt_devices);
+
+#ifdef CONFIG_HPWDT_NMI_DECODING
#define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */
#define CRU_BIOS_SIGNATURE_VALUE 0x55524324
#define PCI_BIOS32_PARAGRAPH_LEN 16
#define PCI_ROM_BASE1 0x000F0000
#define ROM_SIZE 0x10000
-#define HPWDT_VERSION "1.1.1"
struct bios32_service_dir {
u32 signature;
u32 reflags;
} __attribute__((packed));
-#define DEFAULT_MARGIN 30
-static unsigned int soft_margin = DEFAULT_MARGIN; /* in seconds */
-static unsigned int reload; /* the computed soft_margin */
-static int nowayout = WATCHDOG_NOWAYOUT;
-static char expect_release;
-static unsigned long hpwdt_is_open;
+static unsigned int hpwdt_nmi_decoding;
static unsigned int allow_kdump;
-static unsigned int hpwdt_nmi_sourcing;
static unsigned int priority; /* hpwdt at end of die_notify list */
-
-static void __iomem *pci_mem_addr; /* the PCI-memory address */
-static unsigned long __iomem *hpwdt_timer_reg;
-static unsigned long __iomem *hpwdt_timer_con;
-
static DEFINE_SPINLOCK(rom_lock);
-
static void *cru_rom_addr;
-
static struct cmn_registers cmn_regs;
-static struct pci_device_id hpwdt_devices[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) },
- { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) },
- {0}, /* terminate list */
-};
-MODULE_DEVICE_TABLE(pci, hpwdt_devices);
-
extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
unsigned long *pRomEntry);
-#ifndef CONFIG_X86_64
+#ifdef CONFIG_X86_32
/* --32 Bit Bios------------------------------------------------------------ */
#define HPWDT_ARCH 32
physical_bios_offset);
printk(KERN_DEBUG "hpwdt: CRU Length: 0x%lx\n",
cru_length);
- printk(KERN_DEBUG "hpwdt: CRU Mapped Address: 0x%x\n",
- (unsigned int)&cru_rom_addr);
+ printk(KERN_DEBUG "hpwdt: CRU Mapped Address: %p\n",
+ &cru_rom_addr);
}
iounmap(bios32_map);
return retval;
iounmap(p);
return rc;
}
-
-#else
+/* ------------------------------------------------------------------------- */
+#endif /* CONFIG_X86_32 */
+#ifdef CONFIG_X86_64
/* --64 Bit Bios------------------------------------------------------------ */
#define HPWDT_ARCH 64
/* if cru_rom_addr has been set then we found a CRU service */
return ((cru_rom_addr != NULL) ? 0 : -ENODEV);
}
-
/* ------------------------------------------------------------------------- */
-
-#endif
+#endif /* CONFIG_X86_64 */
+#endif /* CONFIG_HPWDT_NMI_DECODING */
/*
* Watchdog operations
*/
static void hpwdt_start(void)
{
- reload = (soft_margin * 1000) / 128;
+ reload = SECS_TO_TICKS(soft_margin);
iowrite16(reload, hpwdt_timer_reg);
iowrite16(0x85, hpwdt_timer_con);
}
static int hpwdt_change_timer(int new_margin)
{
- /* Arbitrary, can't find the card's limits */
- if (new_margin < 5 || new_margin > 600) {
+ if (new_margin < 1 || new_margin > HPWDT_MAX_TIMER) {
printk(KERN_WARNING
"hpwdt: New value passed in is invalid: %d seconds.\n",
new_margin);
printk(KERN_DEBUG
"hpwdt: New timer passed in is %d seconds.\n",
new_margin);
- reload = (soft_margin * 1000) / 128;
+ reload = SECS_TO_TICKS(soft_margin);
return 0;
}
+static int hpwdt_time_left(void)
+{
+ return TICKS_TO_SECS(ioread16(hpwdt_timer_reg));
+}
+
+#ifdef CONFIG_HPWDT_NMI_DECODING
/*
* NMI Handler
*/
static int die_nmi_called;
if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
- return NOTIFY_OK;
-
- if (hpwdt_nmi_sourcing) {
- spin_lock_irqsave(&rom_lock, rom_pl);
- if (!die_nmi_called)
- asminline_call(&cmn_regs, cru_rom_addr);
- die_nmi_called = 1;
- spin_unlock_irqrestore(&rom_lock, rom_pl);
- if (cmn_regs.u1.ral == 0) {
- printk(KERN_WARNING "hpwdt: An NMI occurred, "
- "but unable to determine source.\n");
- } else {
- if (allow_kdump)
- hpwdt_stop();
- panic("An NMI occurred, please see the Integrated "
- "Management Log for details.\n");
- }
+ goto out;
+
+ if (!hpwdt_nmi_decoding)
+ goto out;
+
+ spin_lock_irqsave(&rom_lock, rom_pl);
+ if (!die_nmi_called)
+ asminline_call(&cmn_regs, cru_rom_addr);
+ die_nmi_called = 1;
+ spin_unlock_irqrestore(&rom_lock, rom_pl);
+ if (cmn_regs.u1.ral == 0) {
+ printk(KERN_WARNING "hpwdt: An NMI occurred, "
+ "but unable to determine source.\n");
+ } else {
+ if (allow_kdump)
+ hpwdt_stop();
+ panic("An NMI occurred, please see the Integrated "
+ "Management Log for details.\n");
}
+out:
return NOTIFY_OK;
}
+#endif /* CONFIG_HPWDT_NMI_DECODING */
/*
* /dev/watchdog handling
.options = WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
- .identity = "HP iLO2 HW Watchdog Timer",
+ .identity = "HP iLO2+ HW Watchdog Timer",
};
static long hpwdt_ioctl(struct file *file, unsigned int cmd,
case WDIOC_GETTIMEOUT:
ret = put_user(soft_margin, p);
break;
+
+ case WDIOC_GETTIMELEFT:
+ ret = put_user(hpwdt_time_left(), p);
+ break;
}
return ret;
}
.fops = &hpwdt_fops,
};
+#ifdef CONFIG_HPWDT_NMI_DECODING
static struct notifier_block die_notifier = {
.notifier_call = hpwdt_pretimeout,
.priority = 0,
};
+#endif /* CONFIG_HPWDT_NMI_DECODING */
/*
* Init & Exit
*/
+#ifdef CONFIG_HPWDT_NMI_DECODING
#ifdef ARCH_HAS_NMI_WATCHDOG
-static void __devinit hpwdt_check_nmi_sourcing(struct pci_dev *dev)
+static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
{
/*
* If nmi_watchdog is turned off then we can turn on
- * our nmi sourcing capability.
+ * our nmi decoding capability.
*/
if (!nmi_watchdog_active())
- hpwdt_nmi_sourcing = 1;
+ hpwdt_nmi_decoding = 1;
else
- dev_warn(&dev->dev, "NMI sourcing is disabled. To enable this "
+ dev_warn(&dev->dev, "NMI decoding is disabled. To enable this "
"functionality you must reboot with nmi_watchdog=0 "
"and load the hpwdt driver with priority=1.\n");
}
#else
-static void __devinit hpwdt_check_nmi_sourcing(struct pci_dev *dev)
+static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
{
- dev_warn(&dev->dev, "NMI sourcing is disabled. "
+ dev_warn(&dev->dev, "NMI decoding is disabled. "
"Your kernel does not support a NMI Watchdog.\n");
}
-#endif
+#endif /* ARCH_HAS_NMI_WATCHDOG */
-static int __devinit hpwdt_init_one(struct pci_dev *dev,
- const struct pci_device_id *ent)
+static int __devinit hpwdt_init_nmi_decoding(struct pci_dev *dev)
{
int retval;
- /*
- * Check if we can do NMI sourcing or not
- */
- hpwdt_check_nmi_sourcing(dev);
-
- /*
- * First let's find out if we are on an iLO2 server. We will
- * not run on a legacy ASM box.
- * So we only support the G5 ProLiant servers and higher.
- */
- if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
- dev_warn(&dev->dev,
- "This server does not have an iLO2 ASIC.\n");
- return -ENODEV;
- }
-
- if (pci_enable_device(dev)) {
- dev_warn(&dev->dev,
- "Not possible to enable PCI Device: 0x%x:0x%x.\n",
- ent->vendor, ent->device);
- return -ENODEV;
- }
-
- pci_mem_addr = pci_iomap(dev, 1, 0x80);
- if (!pci_mem_addr) {
- dev_warn(&dev->dev,
- "Unable to detect the iLO2 server memory.\n");
- retval = -ENOMEM;
- goto error_pci_iomap;
- }
- hpwdt_timer_reg = pci_mem_addr + 0x70;
- hpwdt_timer_con = pci_mem_addr + 0x72;
-
- /* Make sure that we have a valid soft_margin */
- if (hpwdt_change_timer(soft_margin))
- hpwdt_change_timer(DEFAULT_MARGIN);
-
/*
* We need to map the ROM to get the CRU service.
* For 32 bit Operating Systems we need to go through the 32 Bit
dev_warn(&dev->dev,
"Unable to detect the %d Bit CRU Service.\n",
HPWDT_ARCH);
- goto error_get_cru;
+ return retval;
}
/*
dev_warn(&dev->dev,
"Unable to register a die notifier (err=%d).\n",
retval);
- goto error_die_notifier;
+ if (cru_rom_addr)
+ iounmap(cru_rom_addr);
}
+ dev_info(&dev->dev,
+ "HP Watchdog Timer Driver: NMI decoding initialized"
+ ", allow kernel dump: %s (default = 0/OFF)"
+ ", priority: %s (default = 0/LAST).\n",
+ (allow_kdump == 0) ? "OFF" : "ON",
+ (priority == 0) ? "LAST" : "FIRST");
+ return 0;
+}
+
+static void __devexit hpwdt_exit_nmi_decoding(void)
+{
+ unregister_die_notifier(&die_notifier);
+ if (cru_rom_addr)
+ iounmap(cru_rom_addr);
+}
+#else /* !CONFIG_HPWDT_NMI_DECODING */
+static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
+{
+}
+
+static int __devinit hpwdt_init_nmi_decoding(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static void __devexit hpwdt_exit_nmi_decoding(void)
+{
+}
+#endif /* CONFIG_HPWDT_NMI_DECODING */
+
+static int __devinit hpwdt_init_one(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ int retval;
+
+ /*
+ * Check if we can do NMI decoding or not
+ */
+ hpwdt_check_nmi_decoding(dev);
+
+ /*
+ * First let's find out if we are on an iLO2+ server. We will
+ * not run on a legacy ASM box.
+ * So we only support the G5 ProLiant servers and higher.
+ */
+ if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
+ dev_warn(&dev->dev,
+ "This server does not have an iLO2+ ASIC.\n");
+ return -ENODEV;
+ }
+
+ if (pci_enable_device(dev)) {
+ dev_warn(&dev->dev,
+ "Not possible to enable PCI Device: 0x%x:0x%x.\n",
+ ent->vendor, ent->device);
+ return -ENODEV;
+ }
+
+ pci_mem_addr = pci_iomap(dev, 1, 0x80);
+ if (!pci_mem_addr) {
+ dev_warn(&dev->dev,
+ "Unable to detect the iLO2+ server memory.\n");
+ retval = -ENOMEM;
+ goto error_pci_iomap;
+ }
+ hpwdt_timer_reg = pci_mem_addr + 0x70;
+ hpwdt_timer_con = pci_mem_addr + 0x72;
+
+ /* Make sure that we have a valid soft_margin */
+ if (hpwdt_change_timer(soft_margin))
+ hpwdt_change_timer(DEFAULT_MARGIN);
+
+ /* Initialize NMI Decoding functionality */
+ retval = hpwdt_init_nmi_decoding(dev);
+ if (retval != 0)
+ goto error_init_nmi_decoding;
+
retval = misc_register(&hpwdt_miscdev);
if (retval < 0) {
dev_warn(&dev->dev,
goto error_misc_register;
}
- printk(KERN_INFO
- "hp Watchdog Timer Driver: %s"
- ", timer margin: %d seconds (nowayout=%d)"
- ", allow kernel dump: %s (default = 0/OFF)"
- ", priority: %s (default = 0/LAST).\n",
- HPWDT_VERSION, soft_margin, nowayout,
- (allow_kdump == 0) ? "OFF" : "ON",
- (priority == 0) ? "LAST" : "FIRST");
-
+ dev_info(&dev->dev, "HP Watchdog Timer Driver: %s"
+ ", timer margin: %d seconds (nowayout=%d).\n",
+ HPWDT_VERSION, soft_margin, nowayout);
return 0;
error_misc_register:
- unregister_die_notifier(&die_notifier);
-error_die_notifier:
- if (cru_rom_addr)
- iounmap(cru_rom_addr);
-error_get_cru:
+ hpwdt_exit_nmi_decoding();
+error_init_nmi_decoding:
pci_iounmap(dev, pci_mem_addr);
error_pci_iomap:
pci_disable_device(dev);
hpwdt_stop();
misc_deregister(&hpwdt_miscdev);
- unregister_die_notifier(&die_notifier);
-
- if (cru_rom_addr)
- iounmap(cru_rom_addr);
+ hpwdt_exit_nmi_decoding();
pci_iounmap(dev, pci_mem_addr);
pci_disable_device(dev);
}
module_param(soft_margin, int, 0);
MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
-module_param(allow_kdump, int, 0);
-MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs");
-
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+#ifdef CONFIG_HPWDT_NMI_DECODING
+module_param(allow_kdump, int, 0);
+MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs");
+
module_param(priority, int, 0);
MODULE_PARM_DESC(priority, "The hpwdt driver handles NMIs first or last"
" (default = 0/Last)\n");
+#endif /* !CONFIG_HPWDT_NMI_DECODING */
module_init(hpwdt_init);
module_exit(hpwdt_cleanup);
.fops = &mpc8xxx_wdt_fops,
};
-static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev,
+static int __devinit mpc8xxx_wdt_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
int ret;
return ret;
}
-static int __devexit mpc8xxx_wdt_remove(struct of_device *ofdev)
+static int __devexit mpc8xxx_wdt_remove(struct platform_device *ofdev)
{
mpc8xxx_wdt_pr_warn("watchdog removed");
del_timer_sync(&wdt_timer);
.fops = &riowd_fops
};
-static int __devinit riowd_probe(struct of_device *op,
+static int __devinit riowd_probe(struct platform_device *op,
const struct of_device_id *match)
{
struct riowd *p;
return err;
}
-static int __devexit riowd_remove(struct of_device *op)
+static int __devexit riowd_remove(struct platform_device *op)
{
struct riowd *p = dev_get_drvdata(&op->dev);
static int __devexit s3c2410wdt_remove(struct platform_device *dev)
{
- s3c2410wdt_cpufreq_deregister();
-
- release_resource(wdt_mem);
- kfree(wdt_mem);
- wdt_mem = NULL;
+ misc_deregister(&s3c2410wdt_miscdev);
- free_irq(wdt_irq->start, dev);
- wdt_irq = NULL;
+ s3c2410wdt_cpufreq_deregister();
clk_disable(wdt_clock);
clk_put(wdt_clock);
wdt_clock = NULL;
+ free_irq(wdt_irq->start, dev);
+ wdt_irq = NULL;
+
iounmap(wdt_base);
- misc_deregister(&s3c2410wdt_miscdev);
+
+ release_resource(wdt_mem);
+ kfree(wdt_mem);
+ wdt_mem = NULL;
return 0;
}
val = therm_trip ? 0x06 : 0x04;
outb(val, sch311x_wdt_data.runtime_reg + RESGEN);
+ sch311x_wdt_miscdev.parent = dev;
+
err = misc_register(&sch311x_wdt_miscdev);
if (err != 0) {
dev_err(dev, "cannot register miscdev on minor=%d (err=%d)\n",
goto exit_release_region3;
}
- sch311x_wdt_miscdev.parent = dev;
-
dev_info(dev,
"SMSC SCH311x WDT initialized. timeout=%d sec (nowayout=%d)\n",
timeout, nowayout);
--- /dev/null
+/*
+ * drivers/char/watchdog/sp805-wdt.c
+ *
+ * Watchdog driver for ARM SP805 watchdog module
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2 or later. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/resource.h>
+#include <linux/amba/bus.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+/* default timeout in seconds */
+#define DEFAULT_TIMEOUT 60
+
+#define MODULE_NAME "sp805-wdt"
+
+/* watchdog register offsets and masks */
+#define WDTLOAD 0x000
+ #define LOAD_MIN 0x00000001
+ #define LOAD_MAX 0xFFFFFFFF
+#define WDTVALUE 0x004
+#define WDTCONTROL 0x008
+ /* control register masks */
+ #define INT_ENABLE (1 << 0)
+ #define RESET_ENABLE (1 << 1)
+#define WDTINTCLR 0x00C
+#define WDTRIS 0x010
+#define WDTMIS 0x014
+ #define INT_MASK (1 << 0)
+#define WDTLOCK 0xC00
+ #define UNLOCK 0x1ACCE551
+ #define LOCK 0x00000001
+
+/**
+ * struct sp805_wdt: sp805 wdt device structure
+ *
+ * lock: spin lock protecting dev structure and io access
+ * base: base address of wdt
+ * clk: clock structure of wdt
+ * dev: amba device structure of wdt
+ * status: current status of wdt
+ * load_val: load value to be set for current timeout
+ * timeout: current programmed timeout
+ */
+struct sp805_wdt {
+ spinlock_t lock;
+ void __iomem *base;
+ struct clk *clk;
+ struct amba_device *adev;
+ unsigned long status;
+ #define WDT_BUSY 0
+ #define WDT_CAN_BE_CLOSED 1
+ unsigned int load_val;
+ unsigned int timeout;
+};
+
+/* local variables */
+static struct sp805_wdt *wdt;
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+/* This routine finds load value that will reset system in required timout */
+static void wdt_setload(unsigned int timeout)
+{
+ u64 load, rate;
+
+ rate = clk_get_rate(wdt->clk);
+
+ /*
+ * sp805 runs counter with given value twice, after the end of first
+ * counter it gives an interrupt and then starts counter again. If
+ * interrupt already occured then it resets the system. This is why
+ * load is half of what should be required.
+ */
+ load = div_u64(rate, 2) * timeout - 1;
+
+ load = (load > LOAD_MAX) ? LOAD_MAX : load;
+ load = (load < LOAD_MIN) ? LOAD_MIN : load;
+
+ spin_lock(&wdt->lock);
+ wdt->load_val = load;
+ /* roundup timeout to closest positive integer value */
+ wdt->timeout = div_u64((load + 1) * 2 + (rate / 2), rate);
+ spin_unlock(&wdt->lock);
+}
+
+/* returns number of seconds left for reset to occur */
+static u32 wdt_timeleft(void)
+{
+ u64 load, rate;
+
+ rate = clk_get_rate(wdt->clk);
+
+ spin_lock(&wdt->lock);
+ load = readl(wdt->base + WDTVALUE);
+
+ /*If the interrupt is inactive then time left is WDTValue + WDTLoad. */
+ if (!(readl(wdt->base + WDTRIS) & INT_MASK))
+ load += wdt->load_val + 1;
+ spin_unlock(&wdt->lock);
+
+ return div_u64(load, rate);
+}
+
+/* enables watchdog timers reset */
+static void wdt_enable(void)
+{
+ spin_lock(&wdt->lock);
+
+ writel(UNLOCK, wdt->base + WDTLOCK);
+ writel(wdt->load_val, wdt->base + WDTLOAD);
+ writel(INT_MASK, wdt->base + WDTINTCLR);
+ writel(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL);
+ writel(LOCK, wdt->base + WDTLOCK);
+
+ spin_unlock(&wdt->lock);
+}
+
+/* disables watchdog timers reset */
+static void wdt_disable(void)
+{
+ spin_lock(&wdt->lock);
+
+ writel(UNLOCK, wdt->base + WDTLOCK);
+ writel(0, wdt->base + WDTCONTROL);
+ writel(0, wdt->base + WDTLOAD);
+ writel(LOCK, wdt->base + WDTLOCK);
+
+ spin_unlock(&wdt->lock);
+}
+
+static ssize_t sp805_wdt_write(struct file *file, const char *data,
+ size_t len, loff_t *ppos)
+{
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ clear_bit(WDT_CAN_BE_CLOSED, &wdt->status);
+
+ for (i = 0; i != len; i++) {
+ char c;
+
+ if (get_user(c, data + i))
+ return -EFAULT;
+ /* Check for Magic Close character */
+ if (c == 'V') {
+ set_bit(WDT_CAN_BE_CLOSED,
+ &wdt->status);
+ break;
+ }
+ }
+ }
+ wdt_enable();
+ }
+ return len;
+}
+
+static const struct watchdog_info ident = {
+ .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = MODULE_NAME,
+};
+
+static long sp805_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int ret = -ENOTTY;
+ unsigned int timeout;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ ret = copy_to_user((struct watchdog_info *)arg, &ident,
+ sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_GETSTATUS:
+ ret = put_user(0, (int *)arg);
+ break;
+
+ case WDIOC_KEEPALIVE:
+ wdt_enable();
+ ret = 0;
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ ret = get_user(timeout, (unsigned int *)arg);
+ if (ret)
+ break;
+
+ wdt_setload(timeout);
+
+ wdt_enable();
+ /* Fall through */
+
+ case WDIOC_GETTIMEOUT:
+ ret = put_user(wdt->timeout, (unsigned int *)arg);
+ break;
+ case WDIOC_GETTIMELEFT:
+ ret = put_user(wdt_timeleft(), (unsigned int *)arg);
+ break;
+ }
+ return ret;
+}
+
+static int sp805_wdt_open(struct inode *inode, struct file *file)
+{
+ int ret = 0;
+
+ if (test_and_set_bit(WDT_BUSY, &wdt->status))
+ return -EBUSY;
+
+ ret = clk_enable(wdt->clk);
+ if (ret) {
+ dev_err(&wdt->adev->dev, "clock enable fail");
+ goto err;
+ }
+
+ wdt_enable();
+
+ /* can not be closed, once enabled */
+ clear_bit(WDT_CAN_BE_CLOSED, &wdt->status);
+ return nonseekable_open(inode, file);
+
+err:
+ clear_bit(WDT_BUSY, &wdt->status);
+ return ret;
+}
+
+static int sp805_wdt_release(struct inode *inode, struct file *file)
+{
+ if (!test_bit(WDT_CAN_BE_CLOSED, &wdt->status)) {
+ clear_bit(WDT_BUSY, &wdt->status);
+ dev_warn(&wdt->adev->dev, "Device closed unexpectedly\n");
+ return 0;
+ }
+
+ wdt_disable();
+ clk_disable(wdt->clk);
+ clear_bit(WDT_BUSY, &wdt->status);
+
+ return 0;
+}
+
+static const struct file_operations sp805_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = sp805_wdt_write,
+ .unlocked_ioctl = sp805_wdt_ioctl,
+ .open = sp805_wdt_open,
+ .release = sp805_wdt_release,
+};
+
+static struct miscdevice sp805_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &sp805_wdt_fops,
+};
+
+static int __devinit
+sp805_wdt_probe(struct amba_device *adev, struct amba_id *id)
+{
+ int ret = 0;
+
+ if (!request_mem_region(adev->res.start, resource_size(&adev->res),
+ "sp805_wdt")) {
+ dev_warn(&adev->dev, "Failed to get memory region resource\n");
+ ret = -ENOENT;
+ goto err;
+ }
+
+ wdt = kzalloc(sizeof(*wdt), GFP_KERNEL);
+ if (!wdt) {
+ dev_warn(&adev->dev, "Kzalloc failed\n");
+ ret = -ENOMEM;
+ goto err_kzalloc;
+ }
+
+ wdt->clk = clk_get(&adev->dev, NULL);
+ if (IS_ERR(wdt->clk)) {
+ dev_warn(&adev->dev, "Clock not found\n");
+ ret = PTR_ERR(wdt->clk);
+ goto err_clk_get;
+ }
+
+ wdt->base = ioremap(adev->res.start, resource_size(&adev->res));
+ if (!wdt->base) {
+ ret = -ENOMEM;
+ dev_warn(&adev->dev, "ioremap fail\n");
+ goto err_ioremap;
+ }
+
+ wdt->adev = adev;
+ spin_lock_init(&wdt->lock);
+ wdt_setload(DEFAULT_TIMEOUT);
+
+ ret = misc_register(&sp805_wdt_miscdev);
+ if (ret < 0) {
+ dev_warn(&adev->dev, "cannot register misc device\n");
+ goto err_misc_register;
+ }
+
+ dev_info(&adev->dev, "registration successful\n");
+ return 0;
+
+err_misc_register:
+ iounmap(wdt->base);
+err_ioremap:
+ clk_put(wdt->clk);
+err_clk_get:
+ kfree(wdt);
+ wdt = NULL;
+err_kzalloc:
+ release_mem_region(adev->res.start, resource_size(&adev->res));
+err:
+ dev_err(&adev->dev, "Probe Failed!!!\n");
+ return ret;
+}
+
+static int __devexit sp805_wdt_remove(struct amba_device *adev)
+{
+ misc_deregister(&sp805_wdt_miscdev);
+ iounmap(wdt->base);
+ clk_put(wdt->clk);
+ kfree(wdt);
+ release_mem_region(adev->res.start, resource_size(&adev->res));
+
+ return 0;
+}
+
+static struct amba_id sp805_wdt_ids[] __initdata = {
+ {
+ .id = 0x00141805,
+ .mask = 0x00ffffff,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver sp805_wdt_driver = {
+ .drv = {
+ .name = MODULE_NAME,
+ },
+ .id_table = sp805_wdt_ids,
+ .probe = sp805_wdt_probe,
+ .remove = __devexit_p(sp805_wdt_remove),
+};
+
+static int __init sp805_wdt_init(void)
+{
+ return amba_driver_register(&sp805_wdt_driver);
+}
+module_init(sp805_wdt_init);
+
+static void __exit sp805_wdt_exit(void)
+{
+ amba_driver_unregister(&sp805_wdt_driver);
+}
+module_exit(sp805_wdt_exit);
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+ "Set to 1 to keep watchdog running after device release");
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_DESCRIPTION("ARM SP805 Watchdog Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
#define PFX "wdt_pci: "
-/*
- * Until Access I/O gets their application for a PCI vendor ID approved,
- * I don't think that it's appropriate to move these constants into the
- * regular pci_ids.h file. -- JPN 2000/01/18
- */
-
-#ifndef PCI_VENDOR_ID_ACCESSIO
-#define PCI_VENDOR_ID_ACCESSIO 0x494f
-#endif
-#ifndef PCI_DEVICE_ID_WDG_CSM
-#define PCI_DEVICE_ID_WDG_CSM 0x22c0
-#endif
-
/* We can only use 1 card due to the /dev/watchdog restriction */
static int dev_count;
static struct pci_device_id wdtpci_pci_tbl[] = {
{
.vendor = PCI_VENDOR_ID_ACCESSIO,
- .device = PCI_DEVICE_ID_WDG_CSM,
+ .device = PCI_DEVICE_ID_ACCESSIO_WDG_CSM,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
initializing xenbus and grant_table when running in a Xen HVM
domain. As a consequence this driver is required to run any Xen PV
frontend on Xen HVM.
+
+config SWIOTLB_XEN
+ def_bool y
+ depends on SWIOTLB
+
endmenu
obj-$(CONFIG_XENFS) += xenfs/
obj-$(CONFIG_XEN_SYS_HYPERVISOR) += sys-hypervisor.o
obj-$(CONFIG_XEN_PLATFORM_PCI) += platform-pci.o
+obj-$(CONFIG_SWIOTLB_XEN) += swiotlb-xen.o
static int register_balloon(struct sys_device *sysdev);
-/*
- * Protects atomic reservation decrease/increase against concurrent increases.
- * Also protects non-atomic updates of current_pages and driver_pages, and
- * balloon lists.
- */
-static DEFINE_SPINLOCK(balloon_lock);
-
static struct balloon_stats balloon_stats;
/* We increase/decrease in batches which fit in a page */
if (nr_pages > ARRAY_SIZE(frame_list))
nr_pages = ARRAY_SIZE(frame_list);
- spin_lock_irqsave(&balloon_lock, flags);
+ spin_lock_irqsave(&xen_reservation_lock, flags);
page = balloon_first_page();
for (i = 0; i < nr_pages; i++) {
balloon_stats.current_pages += rc;
out:
- spin_unlock_irqrestore(&balloon_lock, flags);
+ spin_unlock_irqrestore(&xen_reservation_lock, flags);
return rc < 0 ? rc : rc != nr_pages;
}
kmap_flush_unused();
flush_tlb_all();
- spin_lock_irqsave(&balloon_lock, flags);
+ spin_lock_irqsave(&xen_reservation_lock, flags);
/* No more mappings: invalidate P2M and add to balloon. */
for (i = 0; i < nr_pages; i++) {
balloon_stats.current_pages -= nr_pages;
- spin_unlock_irqrestore(&balloon_lock, flags);
+ spin_unlock_irqrestore(&xen_reservation_lock, flags);
return need_sleep;
}
--- /dev/null
+/*
+ * Copyright 2010
+ * by Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+ *
+ * This code provides a IOMMU for Xen PV guests with PCI passthrough.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * PV guests under Xen are running in an non-contiguous memory architecture.
+ *
+ * When PCI pass-through is utilized, this necessitates an IOMMU for
+ * translating bus (DMA) to virtual and vice-versa and also providing a
+ * mechanism to have contiguous pages for device drivers operations (say DMA
+ * operations).
+ *
+ * Specifically, under Xen the Linux idea of pages is an illusion. It
+ * assumes that pages start at zero and go up to the available memory. To
+ * help with that, the Linux Xen MMU provides a lookup mechanism to
+ * translate the page frame numbers (PFN) to machine frame numbers (MFN)
+ * and vice-versa. The MFN are the "real" frame numbers. Furthermore
+ * memory is not contiguous. Xen hypervisor stitches memory for guests
+ * from different pools, which means there is no guarantee that PFN==MFN
+ * and PFN+1==MFN+1. Lastly with Xen 4.0, pages (in debug mode) are
+ * allocated in descending order (high to low), meaning the guest might
+ * never get any MFN's under the 4GB mark.
+ *
+ */
+
+#include <linux/bootmem.h>
+#include <linux/dma-mapping.h>
+#include <xen/swiotlb-xen.h>
+#include <xen/page.h>
+#include <xen/xen-ops.h>
+/*
+ * Used to do a quick range check in swiotlb_tbl_unmap_single and
+ * swiotlb_tbl_sync_single_*, to see if the memory was in fact allocated by this
+ * API.
+ */
+
+static char *xen_io_tlb_start, *xen_io_tlb_end;
+static unsigned long xen_io_tlb_nslabs;
+/*
+ * Quick lookup value of the bus address of the IOTLB.
+ */
+
+u64 start_dma_addr;
+
+static dma_addr_t xen_phys_to_bus(phys_addr_t paddr)
+{
+ return phys_to_machine(XPADDR(paddr)).maddr;;
+}
+
+static phys_addr_t xen_bus_to_phys(dma_addr_t baddr)
+{
+ return machine_to_phys(XMADDR(baddr)).paddr;
+}
+
+static dma_addr_t xen_virt_to_bus(void *address)
+{
+ return xen_phys_to_bus(virt_to_phys(address));
+}
+
+static int check_pages_physically_contiguous(unsigned long pfn,
+ unsigned int offset,
+ size_t length)
+{
+ unsigned long next_mfn;
+ int i;
+ int nr_pages;
+
+ next_mfn = pfn_to_mfn(pfn);
+ nr_pages = (offset + length + PAGE_SIZE-1) >> PAGE_SHIFT;
+
+ for (i = 1; i < nr_pages; i++) {
+ if (pfn_to_mfn(++pfn) != ++next_mfn)
+ return 0;
+ }
+ return 1;
+}
+
+static int range_straddles_page_boundary(phys_addr_t p, size_t size)
+{
+ unsigned long pfn = PFN_DOWN(p);
+ unsigned int offset = p & ~PAGE_MASK;
+
+ if (offset + size <= PAGE_SIZE)
+ return 0;
+ if (check_pages_physically_contiguous(pfn, offset, size))
+ return 0;
+ return 1;
+}
+
+static int is_xen_swiotlb_buffer(dma_addr_t dma_addr)
+{
+ unsigned long mfn = PFN_DOWN(dma_addr);
+ unsigned long pfn = mfn_to_local_pfn(mfn);
+ phys_addr_t paddr;
+
+ /* If the address is outside our domain, it CAN
+ * have the same virtual address as another address
+ * in our domain. Therefore _only_ check address within our domain.
+ */
+ if (pfn_valid(pfn)) {
+ paddr = PFN_PHYS(pfn);
+ return paddr >= virt_to_phys(xen_io_tlb_start) &&
+ paddr < virt_to_phys(xen_io_tlb_end);
+ }
+ return 0;
+}
+
+static int max_dma_bits = 32;
+
+static int
+xen_swiotlb_fixup(void *buf, size_t size, unsigned long nslabs)
+{
+ int i, rc;
+ int dma_bits;
+
+ dma_bits = get_order(IO_TLB_SEGSIZE << IO_TLB_SHIFT) + PAGE_SHIFT;
+
+ i = 0;
+ do {
+ int slabs = min(nslabs - i, (unsigned long)IO_TLB_SEGSIZE);
+
+ do {
+ rc = xen_create_contiguous_region(
+ (unsigned long)buf + (i << IO_TLB_SHIFT),
+ get_order(slabs << IO_TLB_SHIFT),
+ dma_bits);
+ } while (rc && dma_bits++ < max_dma_bits);
+ if (rc)
+ return rc;
+
+ i += slabs;
+ } while (i < nslabs);
+ return 0;
+}
+
+void __init xen_swiotlb_init(int verbose)
+{
+ unsigned long bytes;
+ int rc;
+
+ xen_io_tlb_nslabs = (64 * 1024 * 1024 >> IO_TLB_SHIFT);
+ xen_io_tlb_nslabs = ALIGN(xen_io_tlb_nslabs, IO_TLB_SEGSIZE);
+
+ bytes = xen_io_tlb_nslabs << IO_TLB_SHIFT;
+
+ /*
+ * Get IO TLB memory from any location.
+ */
+ xen_io_tlb_start = alloc_bootmem(bytes);
+ if (!xen_io_tlb_start)
+ panic("Cannot allocate SWIOTLB buffer");
+
+ xen_io_tlb_end = xen_io_tlb_start + bytes;
+ /*
+ * And replace that memory with pages under 4GB.
+ */
+ rc = xen_swiotlb_fixup(xen_io_tlb_start,
+ bytes,
+ xen_io_tlb_nslabs);
+ if (rc)
+ goto error;
+
+ start_dma_addr = xen_virt_to_bus(xen_io_tlb_start);
+ swiotlb_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs, verbose);
+
+ return;
+error:
+ panic("DMA(%d): Failed to exchange pages allocated for DMA with Xen! "\
+ "We either don't have the permission or you do not have enough"\
+ "free memory under 4GB!\n", rc);
+}
+
+void *
+xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flags)
+{
+ void *ret;
+ int order = get_order(size);
+ u64 dma_mask = DMA_BIT_MASK(32);
+ unsigned long vstart;
+
+ /*
+ * Ignore region specifiers - the kernel's ideas of
+ * pseudo-phys memory layout has nothing to do with the
+ * machine physical layout. We can't allocate highmem
+ * because we can't return a pointer to it.
+ */
+ flags &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+ if (dma_alloc_from_coherent(hwdev, size, dma_handle, &ret))
+ return ret;
+
+ vstart = __get_free_pages(flags, order);
+ ret = (void *)vstart;
+
+ if (hwdev && hwdev->coherent_dma_mask)
+ dma_mask = dma_alloc_coherent_mask(hwdev, flags);
+
+ if (ret) {
+ if (xen_create_contiguous_region(vstart, order,
+ fls64(dma_mask)) != 0) {
+ free_pages(vstart, order);
+ return NULL;
+ }
+ memset(ret, 0, size);
+ *dma_handle = virt_to_machine(ret).maddr;
+ }
+ return ret;
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_alloc_coherent);
+
+void
+xen_swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
+ dma_addr_t dev_addr)
+{
+ int order = get_order(size);
+
+ if (dma_release_from_coherent(hwdev, order, vaddr))
+ return;
+
+ xen_destroy_contiguous_region((unsigned long)vaddr, order);
+ free_pages((unsigned long)vaddr, order);
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_free_coherent);
+
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode. The
+ * physical address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory until
+ * either xen_swiotlb_unmap_page or xen_swiotlb_dma_sync_single is performed.
+ */
+dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ phys_addr_t phys = page_to_phys(page) + offset;
+ dma_addr_t dev_addr = xen_phys_to_bus(phys);
+ void *map;
+
+ BUG_ON(dir == DMA_NONE);
+ /*
+ * If the address happens to be in the device's DMA window,
+ * we can safely return the device addr and not worry about bounce
+ * buffering it.
+ */
+ if (dma_capable(dev, dev_addr, size) &&
+ !range_straddles_page_boundary(phys, size) && !swiotlb_force)
+ return dev_addr;
+
+ /*
+ * Oh well, have to allocate and map a bounce buffer.
+ */
+ map = swiotlb_tbl_map_single(dev, start_dma_addr, phys, size, dir);
+ if (!map)
+ return DMA_ERROR_CODE;
+
+ dev_addr = xen_virt_to_bus(map);
+
+ /*
+ * Ensure that the address returned is DMA'ble
+ */
+ if (!dma_capable(dev, dev_addr, size))
+ panic("map_single: bounce buffer is not DMA'ble");
+
+ return dev_addr;
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_map_page);
+
+/*
+ * Unmap a single streaming mode DMA translation. The dma_addr and size must
+ * match what was provided for in a previous xen_swiotlb_map_page call. All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static void xen_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
+ size_t size, enum dma_data_direction dir)
+{
+ phys_addr_t paddr = xen_bus_to_phys(dev_addr);
+
+ BUG_ON(dir == DMA_NONE);
+
+ /* NOTE: We use dev_addr here, not paddr! */
+ if (is_xen_swiotlb_buffer(dev_addr)) {
+ swiotlb_tbl_unmap_single(hwdev, phys_to_virt(paddr), size, dir);
+ return;
+ }
+
+ if (dir != DMA_FROM_DEVICE)
+ return;
+
+ /*
+ * phys_to_virt doesn't work with hihgmem page but we could
+ * call dma_mark_clean() with hihgmem page here. However, we
+ * are fine since dma_mark_clean() is null on POWERPC. We can
+ * make dma_mark_clean() take a physical address if necessary.
+ */
+ dma_mark_clean(phys_to_virt(paddr), size);
+}
+
+void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
+ size_t size, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ xen_unmap_single(hwdev, dev_addr, size, dir);
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_unmap_page);
+
+/*
+ * Make physical memory consistent for a single streaming mode DMA translation
+ * after a transfer.
+ *
+ * If you perform a xen_swiotlb_map_page() but wish to interrogate the buffer
+ * using the cpu, yet do not wish to teardown the dma mapping, you must
+ * call this function before doing so. At the next point you give the dma
+ * address back to the card, you must first perform a
+ * xen_swiotlb_dma_sync_for_device, and then the device again owns the buffer
+ */
+static void
+xen_swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
+ size_t size, enum dma_data_direction dir,
+ enum dma_sync_target target)
+{
+ phys_addr_t paddr = xen_bus_to_phys(dev_addr);
+
+ BUG_ON(dir == DMA_NONE);
+
+ /* NOTE: We use dev_addr here, not paddr! */
+ if (is_xen_swiotlb_buffer(dev_addr)) {
+ swiotlb_tbl_sync_single(hwdev, phys_to_virt(paddr), size, dir,
+ target);
+ return;
+ }
+
+ if (dir != DMA_FROM_DEVICE)
+ return;
+
+ dma_mark_clean(phys_to_virt(paddr), size);
+}
+
+void
+xen_swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
+ size_t size, enum dma_data_direction dir)
+{
+ xen_swiotlb_sync_single(hwdev, dev_addr, size, dir, SYNC_FOR_CPU);
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_sync_single_for_cpu);
+
+void
+xen_swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr,
+ size_t size, enum dma_data_direction dir)
+{
+ xen_swiotlb_sync_single(hwdev, dev_addr, size, dir, SYNC_FOR_DEVICE);
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_sync_single_for_device);
+
+/*
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * This is the scatter-gather version of the above xen_swiotlb_map_page
+ * interface. Here the scatter gather list elements are each tagged with the
+ * appropriate dma address and length. They are obtained via
+ * sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ * DMA address/length pairs than there are SG table elements.
+ * (for example via virtual mapping capabilities)
+ * The routine returns the number of addr/length pairs actually
+ * used, at most nents.
+ *
+ * Device ownership issues as mentioned above for xen_swiotlb_map_page are the
+ * same here.
+ */
+int
+xen_swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
+ int nelems, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct scatterlist *sg;
+ int i;
+
+ BUG_ON(dir == DMA_NONE);
+
+ for_each_sg(sgl, sg, nelems, i) {
+ phys_addr_t paddr = sg_phys(sg);
+ dma_addr_t dev_addr = xen_phys_to_bus(paddr);
+
+ if (swiotlb_force ||
+ !dma_capable(hwdev, dev_addr, sg->length) ||
+ range_straddles_page_boundary(paddr, sg->length)) {
+ void *map = swiotlb_tbl_map_single(hwdev,
+ start_dma_addr,
+ sg_phys(sg),
+ sg->length, dir);
+ if (!map) {
+ /* Don't panic here, we expect map_sg users
+ to do proper error handling. */
+ xen_swiotlb_unmap_sg_attrs(hwdev, sgl, i, dir,
+ attrs);
+ sgl[0].dma_length = 0;
+ return DMA_ERROR_CODE;
+ }
+ sg->dma_address = xen_virt_to_bus(map);
+ } else
+ sg->dma_address = dev_addr;
+ sg->dma_length = sg->length;
+ }
+ return nelems;
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_map_sg_attrs);
+
+int
+xen_swiotlb_map_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
+ enum dma_data_direction dir)
+{
+ return xen_swiotlb_map_sg_attrs(hwdev, sgl, nelems, dir, NULL);
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_map_sg);
+
+/*
+ * Unmap a set of streaming mode DMA translations. Again, cpu read rules
+ * concerning calls here are the same as for swiotlb_unmap_page() above.
+ */
+void
+xen_swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
+ int nelems, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct scatterlist *sg;
+ int i;
+
+ BUG_ON(dir == DMA_NONE);
+
+ for_each_sg(sgl, sg, nelems, i)
+ xen_unmap_single(hwdev, sg->dma_address, sg->dma_length, dir);
+
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_unmap_sg_attrs);
+
+void
+xen_swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
+ enum dma_data_direction dir)
+{
+ return xen_swiotlb_unmap_sg_attrs(hwdev, sgl, nelems, dir, NULL);
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_unmap_sg);
+
+/*
+ * Make physical memory consistent for a set of streaming mode DMA translations
+ * after a transfer.
+ *
+ * The same as swiotlb_sync_single_* but for a scatter-gather list, same rules
+ * and usage.
+ */
+static void
+xen_swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sgl,
+ int nelems, enum dma_data_direction dir,
+ enum dma_sync_target target)
+{
+ struct scatterlist *sg;
+ int i;
+
+ for_each_sg(sgl, sg, nelems, i)
+ xen_swiotlb_sync_single(hwdev, sg->dma_address,
+ sg->dma_length, dir, target);
+}
+
+void
+xen_swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction dir)
+{
+ xen_swiotlb_sync_sg(hwdev, sg, nelems, dir, SYNC_FOR_CPU);
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_sync_sg_for_cpu);
+
+void
+xen_swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction dir)
+{
+ xen_swiotlb_sync_sg(hwdev, sg, nelems, dir, SYNC_FOR_DEVICE);
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_sync_sg_for_device);
+
+int
+xen_swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr)
+{
+ return !dma_addr;
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_dma_mapping_error);
+
+/*
+ * Return whether the given device DMA address mask can be supported
+ * properly. For example, if your device can only drive the low 24-bits
+ * during bus mastering, then you would pass 0x00ffffff as the mask to
+ * this function.
+ */
+int
+xen_swiotlb_dma_supported(struct device *hwdev, u64 mask)
+{
+ return xen_virt_to_bus(xen_io_tlb_end - 1) <= mask;
+}
+EXPORT_SYMBOL_GPL(xen_swiotlb_dma_supported);
}
EXPORT_SYMBOL_GPL(xenbus_watch_pathfmt);
+static void xenbus_switch_fatal(struct xenbus_device *, int, int,
+ const char *, ...);
-/**
- * xenbus_switch_state
- * @dev: xenbus device
- * @state: new state
- *
- * Advertise in the store a change of the given driver to the given new_state.
- * Return 0 on success, or -errno on error. On error, the device will switch
- * to XenbusStateClosing, and the error will be saved in the store.
- */
-int xenbus_switch_state(struct xenbus_device *dev, enum xenbus_state state)
+static int
+__xenbus_switch_state(struct xenbus_device *dev,
+ enum xenbus_state state, int depth)
{
/* We check whether the state is currently set to the given value, and
if not, then the state is set. We don't want to unconditionally
to it, as the device will be tearing down, and we don't want to
resurrect that directory.
- Note that, because of this cached value of our state, this function
- will not work inside a Xenstore transaction (something it was
- trying to in the past) because dev->state would not get reset if
- the transaction was aborted.
-
+ Note that, because of this cached value of our state, this
+ function will not take a caller's Xenstore transaction
+ (something it was trying to in the past) because dev->state
+ would not get reset if the transaction was aborted.
*/
+ struct xenbus_transaction xbt;
int current_state;
- int err;
+ int err, abort;
if (state == dev->state)
return 0;
- err = xenbus_scanf(XBT_NIL, dev->nodename, "state", "%d",
- ¤t_state);
- if (err != 1)
+again:
+ abort = 1;
+
+ err = xenbus_transaction_start(&xbt);
+ if (err) {
+ xenbus_switch_fatal(dev, depth, err, "starting transaction");
return 0;
+ }
+
+ err = xenbus_scanf(xbt, dev->nodename, "state", "%d", ¤t_state);
+ if (err != 1)
+ goto abort;
- err = xenbus_printf(XBT_NIL, dev->nodename, "state", "%d", state);
+ err = xenbus_printf(xbt, dev->nodename, "state", "%d", state);
if (err) {
- if (state != XenbusStateClosing) /* Avoid looping */
- xenbus_dev_fatal(dev, err, "writing new state");
- return err;
+ xenbus_switch_fatal(dev, depth, err, "writing new state");
+ goto abort;
}
- dev->state = state;
+ abort = 0;
+abort:
+ err = xenbus_transaction_end(xbt, abort);
+ if (err) {
+ if (err == -EAGAIN && !abort)
+ goto again;
+ xenbus_switch_fatal(dev, depth, err, "ending transaction");
+ } else
+ dev->state = state;
return 0;
}
+
+/**
+ * xenbus_switch_state
+ * @dev: xenbus device
+ * @state: new state
+ *
+ * Advertise in the store a change of the given driver to the given new_state.
+ * Return 0 on success, or -errno on error. On error, the device will switch
+ * to XenbusStateClosing, and the error will be saved in the store.
+ */
+int xenbus_switch_state(struct xenbus_device *dev, enum xenbus_state state)
+{
+ return __xenbus_switch_state(dev, state, 0);
+}
+
EXPORT_SYMBOL_GPL(xenbus_switch_state);
int xenbus_frontend_closed(struct xenbus_device *dev)
}
EXPORT_SYMBOL_GPL(xenbus_dev_fatal);
+/**
+ * Equivalent to xenbus_dev_fatal(dev, err, fmt, args), but helps
+ * avoiding recursion within xenbus_switch_state.
+ */
+static void xenbus_switch_fatal(struct xenbus_device *dev, int depth, int err,
+ const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ xenbus_va_dev_error(dev, err, fmt, ap);
+ va_end(ap);
+
+ if (!depth)
+ __xenbus_switch_state(dev, XenbusStateClosing, 1);
+}
+
/**
* xenbus_grant_ring
* @dev: xenbus device
proc_bus_zorro_lseek(struct file *file, loff_t off, int whence)
{
loff_t new = -1;
+ struct inode *inode = file->f_path.dentry->d_inode;
- lock_kernel();
+ mutex_lock(&inode->i_mutex);
switch (whence) {
case 0:
new = off;
new = sizeof(struct ConfigDev) + off;
break;
}
- if (new < 0 || new > sizeof(struct ConfigDev)) {
- unlock_kernel();
- return -EINVAL;
- }
- unlock_kernel();
- return (file->f_pos = new);
+ if (new < 0 || new > sizeof(struct ConfigDev))
+ new = -EINVAL;
+ else
+ file->f_pos = new;
+ mutex_unlock(&inode->i_mutex);
+ return new;
}
static ssize_t
cd.cd_BoardAddr = (void *)zorro_resource_start(z);
cd.cd_BoardSize = zorro_resource_len(z);
- if (copy_to_user(buf, &cd, nbytes))
+ if (copy_to_user(buf, (void *)&cd + pos, nbytes))
return -EFAULT;
*ppos += nbytes;
#endif
struct inode *v9fs_get_inode(struct super_block *sb, int mode);
-void v9fs_clear_inode(struct inode *inode);
+void v9fs_evict_inode(struct inode *inode);
ino_t v9fs_qid2ino(struct p9_qid *qid);
void v9fs_stat2inode(struct p9_wstat *, struct inode *, struct super_block *);
void v9fs_stat2inode_dotl(struct p9_stat_dotl *, struct inode *);
* @inode: inode to release
*
*/
-void v9fs_clear_inode(struct inode *inode)
+void v9fs_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(inode->i_mapping, 0);
+ end_writeback(inode);
filemap_fdatawrite(inode->i_mapping);
#ifdef CONFIG_9P_FSCACHE
}
retval = p9_client_wstat(fid, &wstat);
- if (retval >= 0)
- retval = inode_setattr(dentry->d_inode, iattr);
+ if (retval < 0)
+ return retval;
- return retval;
+ if ((iattr->ia_valid & ATTR_SIZE) &&
+ iattr->ia_size != i_size_read(dentry->d_inode)) {
+ retval = vmtruncate(dentry->d_inode, iattr->ia_size);
+ if (retval)
+ return retval;
+ }
+
+ setattr_copy(dentry->d_inode, iattr);
+ mark_inode_dirty(dentry->d_inode);
+ return 0;
}
/**
return PTR_ERR(fid);
retval = p9_client_setattr(fid, &p9attr);
- if (retval >= 0)
- retval = inode_setattr(dentry->d_inode, iattr);
+ if (retval < 0)
+ return retval;
- return retval;
+ if ((iattr->ia_valid & ATTR_SIZE) &&
+ iattr->ia_size != i_size_read(dentry->d_inode)) {
+ retval = vmtruncate(dentry->d_inode, iattr->ia_size);
+ if (retval)
+ return retval;
+ }
+
+ setattr_copy(dentry->d_inode, iattr);
+ mark_inode_dirty(dentry->d_inode);
+ return 0;
}
/**
.destroy_inode = v9fs_destroy_inode,
#endif
.statfs = simple_statfs,
- .clear_inode = v9fs_clear_inode,
+ .evict_inode = v9fs_evict_inode,
.show_options = generic_show_options,
.umount_begin = v9fs_umount_begin,
};
.destroy_inode = v9fs_destroy_inode,
#endif
.statfs = v9fs_statfs,
- .clear_inode = v9fs_clear_inode,
+ .evict_inode = v9fs_evict_inode,
.show_options = generic_show_options,
.umount_begin = v9fs_umount_begin,
};
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
adfs_get_block,
&ADFS_I(mapping->host)->mmu_private);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t _adfs_bmap(struct address_space *mapping, sector_t block)
/* XXX: this is missing some actual on-disk truncation.. */
if (ia_valid & ATTR_SIZE)
- error = simple_setsize(inode, attr->ia_size);
-
- if (error)
- goto out;
+ truncate_setsize(inode, attr->ia_size);
if (ia_valid & ATTR_MTIME) {
inode->i_mtime = attr->ia_mtime;
extern unsigned long affs_parent_ino(struct inode *dir);
extern struct inode *affs_new_inode(struct inode *dir);
extern int affs_notify_change(struct dentry *dentry, struct iattr *attr);
-extern void affs_delete_inode(struct inode *inode);
-extern void affs_clear_inode(struct inode *inode);
+extern void affs_evict_inode(struct inode *inode);
extern struct inode *affs_iget(struct super_block *sb,
unsigned long ino);
extern int affs_write_inode(struct inode *inode,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
affs_get_block,
&AFFS_I(mapping->host)->mmu_private);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t _affs_bmap(struct address_space *mapping, sector_t block)
goto out;
}
- error = inode_setattr(inode, attr);
- if (!error && (attr->ia_valid & ATTR_MODE))
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
+ if (attr->ia_valid & ATTR_MODE)
mode_to_prot(inode);
out:
return error;
}
void
-affs_delete_inode(struct inode *inode)
-{
- pr_debug("AFFS: delete_inode(ino=%lu, nlink=%u)\n", inode->i_ino, inode->i_nlink);
- truncate_inode_pages(&inode->i_data, 0);
- inode->i_size = 0;
- affs_truncate(inode);
- clear_inode(inode);
- affs_free_block(inode->i_sb, inode->i_ino);
-}
-
-void
-affs_clear_inode(struct inode *inode)
+affs_evict_inode(struct inode *inode)
{
unsigned long cache_page;
+ pr_debug("AFFS: evict_inode(ino=%lu, nlink=%u)\n", inode->i_ino, inode->i_nlink);
+ truncate_inode_pages(&inode->i_data, 0);
- pr_debug("AFFS: clear_inode(ino=%lu, nlink=%u)\n", inode->i_ino, inode->i_nlink);
+ if (!inode->i_nlink) {
+ inode->i_size = 0;
+ affs_truncate(inode);
+ }
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
affs_free_prealloc(inode);
cache_page = (unsigned long)AFFS_I(inode)->i_lc;
if (cache_page) {
affs_brelse(AFFS_I(inode)->i_ext_bh);
AFFS_I(inode)->i_ext_last = ~1;
AFFS_I(inode)->i_ext_bh = NULL;
+
+ if (!inode->i_nlink)
+ affs_free_block(inode->i_sb, inode->i_ino);
}
struct inode *
static int affs_remount (struct super_block *sb, int *flags, char *data);
static void
-affs_commit_super(struct super_block *sb, int clean)
+affs_commit_super(struct super_block *sb, int wait, int clean)
{
struct affs_sb_info *sbi = AFFS_SB(sb);
struct buffer_head *bh = sbi->s_root_bh;
secs_to_datestamp(get_seconds(), &tail->disk_change);
affs_fix_checksum(sb, bh);
mark_buffer_dirty(bh);
+ if (wait)
+ sync_dirty_buffer(bh);
}
static void
lock_kernel();
- if (!(sb->s_flags & MS_RDONLY))
- affs_commit_super(sb, 1);
+ if (!(sb->s_flags & MS_RDONLY) && sb->s_dirt)
+ affs_commit_super(sb, 1, 1);
kfree(sbi->s_prefix);
affs_free_bitmap(sb);
static void
affs_write_super(struct super_block *sb)
{
- int clean = 2;
-
lock_super(sb);
- if (!(sb->s_flags & MS_RDONLY)) {
- // if (sbi->s_bitmap[i].bm_bh) {
- // if (buffer_dirty(sbi->s_bitmap[i].bm_bh)) {
- // clean = 0;
- affs_commit_super(sb, clean);
- sb->s_dirt = !clean; /* redo until bitmap synced */
- } else
- sb->s_dirt = 0;
+ if (!(sb->s_flags & MS_RDONLY))
+ affs_commit_super(sb, 1, 2);
+ sb->s_dirt = 0;
unlock_super(sb);
- pr_debug("AFFS: write_super() at %lu, clean=%d\n", get_seconds(), clean);
+ pr_debug("AFFS: write_super() at %lu, clean=2\n", get_seconds());
}
static int
affs_sync_fs(struct super_block *sb, int wait)
{
lock_super(sb);
- affs_commit_super(sb, 2);
+ affs_commit_super(sb, wait, 2);
sb->s_dirt = 0;
unlock_super(sb);
return 0;
.alloc_inode = affs_alloc_inode,
.destroy_inode = affs_destroy_inode,
.write_inode = affs_write_inode,
- .delete_inode = affs_delete_inode,
- .clear_inode = affs_clear_inode,
+ .evict_inode = affs_evict_inode,
.put_super = affs_put_super,
.write_super = affs_write_super,
.sync_fs = affs_sync_fs,
return 0;
}
if (*flags & MS_RDONLY) {
- sb->s_dirt = 1;
- while (sb->s_dirt)
- affs_write_super(sb);
+ affs_write_super(sb);
affs_free_bitmap(sb);
} else
res = affs_init_bitmap(sb, flags);
* allocate a cell record and fill in its name, VL server address list and
* allocate an anonymous key
*/
-static struct afs_cell *afs_cell_alloc(const char *name, char *vllist)
+static struct afs_cell *afs_cell_alloc(const char *name, unsigned namelen,
+ char *vllist)
{
struct afs_cell *cell;
struct key *key;
- size_t namelen;
char keyname[4 + AFS_MAXCELLNAME + 1], *cp, *dp, *next;
char *dvllist = NULL, *_vllist = NULL;
char delimiter = ':';
int ret;
- _enter("%s,%s", name, vllist);
+ _enter("%*.*s,%s", namelen, namelen, name ?: "", vllist);
BUG_ON(!name); /* TODO: want to look up "this cell" in the cache */
- namelen = strlen(name);
if (namelen > AFS_MAXCELLNAME) {
_leave(" = -ENAMETOOLONG");
return ERR_PTR(-ENAMETOOLONG);
if (!vllist || strlen(vllist) < 7) {
ret = dns_query("afsdb", name, namelen, "ipv4", &dvllist, NULL);
if (ret < 0) {
+ if (ret == -ENODATA || ret == -EAGAIN || ret == -ENOKEY)
+ /* translate these errors into something
+ * userspace might understand */
+ ret = -EDESTADDRREQ;
_leave(" = %d", ret);
return ERR_PTR(ret);
}
}
/*
- * create a cell record
- * - "name" is the name of the cell
- * - "vllist" is a colon separated list of IP addresses in "a.b.c.d" format
+ * afs_cell_crate() - create a cell record
+ * @name: is the name of the cell.
+ * @namsesz: is the strlen of the cell name.
+ * @vllist: is a colon separated list of IP addresses in "a.b.c.d" format.
+ * @retref: is T to return the cell reference when the cell exists.
*/
-struct afs_cell *afs_cell_create(const char *name, char *vllist)
+struct afs_cell *afs_cell_create(const char *name, unsigned namesz,
+ char *vllist, bool retref)
{
struct afs_cell *cell;
int ret;
- _enter("%s,%s", name, vllist);
+ _enter("%*.*s,%s", namesz, namesz, name ?: "", vllist);
down_write(&afs_cells_sem);
read_lock(&afs_cells_lock);
list_for_each_entry(cell, &afs_cells, link) {
- if (strcasecmp(cell->name, name) == 0)
+ if (strncasecmp(cell->name, name, namesz) == 0)
goto duplicate_name;
}
read_unlock(&afs_cells_lock);
- cell = afs_cell_alloc(name, vllist);
+ cell = afs_cell_alloc(name, namesz, vllist);
if (IS_ERR(cell)) {
_leave(" = %ld", PTR_ERR(cell));
up_write(&afs_cells_sem);
return ERR_PTR(ret);
duplicate_name:
+ if (retref && !IS_ERR(cell))
+ afs_get_cell(cell);
+
read_unlock(&afs_cells_lock);
up_write(&afs_cells_sem);
+
+ if (retref) {
+ _leave(" = %p", cell);
+ return cell;
+ }
+
+ _leave(" = -EEXIST");
return ERR_PTR(-EEXIST);
}
*cp++ = 0;
/* allocate a cell record for the root cell */
- new_root = afs_cell_create(rootcell, cp);
+ new_root = afs_cell_create(rootcell, strlen(rootcell), cp, false);
if (IS_ERR(new_root)) {
_leave(" = %ld", PTR_ERR(new_root));
return PTR_ERR(new_root);
/*
* lookup a cell record
*/
-struct afs_cell *afs_cell_lookup(const char *name, unsigned namesz)
+struct afs_cell *afs_cell_lookup(const char *name, unsigned namesz,
+ bool dns_cell)
{
struct afs_cell *cell;
- _enter("\"%*.*s\",", namesz, namesz, name ? name : "");
+ _enter("\"%*.*s\",", namesz, namesz, name ?: "");
down_read(&afs_cells_sem);
read_lock(&afs_cells_lock);
}
}
cell = ERR_PTR(-ENOENT);
+ if (dns_cell)
+ goto create_cell;
found:
;
} else {
up_read(&afs_cells_sem);
_leave(" = %p", cell);
return cell;
+
+create_cell:
+ read_unlock(&afs_cells_lock);
+ up_read(&afs_cells_sem);
+
+ cell = afs_cell_create(name, namesz, NULL, true);
+
+ _leave(" = %p", cell);
+ return cell;
}
#if 0
return 0;
}
+/*
+ * Try to auto mount the mountpoint with pseudo directory, if the autocell
+ * operation is setted.
+ */
+static struct inode *afs_try_auto_mntpt(
+ int ret, struct dentry *dentry, struct inode *dir, struct key *key,
+ struct afs_fid *fid)
+{
+ const char *devname = dentry->d_name.name;
+ struct afs_vnode *vnode = AFS_FS_I(dir);
+ struct inode *inode;
+
+ _enter("%d, %p{%s}, {%x:%u}, %p",
+ ret, dentry, devname, vnode->fid.vid, vnode->fid.vnode, key);
+
+ if (ret != -ENOENT ||
+ !test_bit(AFS_VNODE_AUTOCELL, &vnode->flags))
+ goto out;
+
+ inode = afs_iget_autocell(dir, devname, strlen(devname), key);
+ if (IS_ERR(inode)) {
+ ret = PTR_ERR(inode);
+ goto out;
+ }
+
+ *fid = AFS_FS_I(inode)->fid;
+ _leave("= %p", inode);
+ return inode;
+
+out:
+ _leave("= %d", ret);
+ return ERR_PTR(ret);
+}
+
/*
* look up an entry in a directory
*/
ret = afs_do_lookup(dir, dentry, &fid, key);
if (ret < 0) {
+ inode = afs_try_auto_mntpt(ret, dentry, dir, key, &fid);
+ if (!IS_ERR(inode)) {
+ key_put(key);
+ goto success;
+ }
+
+ ret = PTR_ERR(inode);
key_put(key);
if (ret == -ENOENT) {
d_add(dentry, NULL);
return ERR_CAST(inode);
}
+success:
dentry->d_op = &afs_fs_dentry_operations;
d_add(dentry, inode);
goto zap;
if (dentry->d_inode &&
- test_bit(AFS_VNODE_DELETED, &AFS_FS_I(dentry->d_inode)->flags))
- goto zap;
+ (test_bit(AFS_VNODE_DELETED, &AFS_FS_I(dentry->d_inode)->flags) ||
+ test_bit(AFS_VNODE_PSEUDODIR, &AFS_FS_I(dentry->d_inode)->flags)))
+ goto zap;
_leave(" = 0 [keep]");
return 0;
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/sched.h>
+#include <linux/mount.h>
+#include <linux/namei.h>
#include "internal.h"
struct afs_iget_data {
inode->i_version == data->fid.unique;
}
+/*
+ * iget5() comparator for inode created by autocell operations
+ *
+ * These pseudo inodes don't match anything.
+ */
+static int afs_iget5_autocell_test(struct inode *inode, void *opaque)
+{
+ return 0;
+}
+
/*
* iget5() inode initialiser
*/
return 0;
}
+/*
+ * inode retrieval for autocell
+ */
+struct inode *afs_iget_autocell(struct inode *dir, const char *dev_name,
+ int namesz, struct key *key)
+{
+ struct afs_iget_data data;
+ struct afs_super_info *as;
+ struct afs_vnode *vnode;
+ struct super_block *sb;
+ struct inode *inode;
+ static atomic_t afs_autocell_ino;
+
+ _enter("{%x:%u},%*.*s,",
+ AFS_FS_I(dir)->fid.vid, AFS_FS_I(dir)->fid.vnode,
+ namesz, namesz, dev_name ?: "");
+
+ sb = dir->i_sb;
+ as = sb->s_fs_info;
+ data.volume = as->volume;
+ data.fid.vid = as->volume->vid;
+ data.fid.unique = 0;
+ data.fid.vnode = 0;
+
+ inode = iget5_locked(sb, atomic_inc_return(&afs_autocell_ino),
+ afs_iget5_autocell_test, afs_iget5_set,
+ &data);
+ if (!inode) {
+ _leave(" = -ENOMEM");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ _debug("GOT INODE %p { ino=%lu, vl=%x, vn=%x, u=%x }",
+ inode, inode->i_ino, data.fid.vid, data.fid.vnode,
+ data.fid.unique);
+
+ vnode = AFS_FS_I(inode);
+
+ /* there shouldn't be an existing inode */
+ BUG_ON(!(inode->i_state & I_NEW));
+
+ inode->i_size = 0;
+ inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO;
+ inode->i_op = &afs_autocell_inode_operations;
+ inode->i_nlink = 2;
+ inode->i_uid = 0;
+ inode->i_gid = 0;
+ inode->i_ctime.tv_sec = get_seconds();
+ inode->i_ctime.tv_nsec = 0;
+ inode->i_atime = inode->i_mtime = inode->i_ctime;
+ inode->i_blocks = 0;
+ inode->i_version = 0;
+ inode->i_generation = 0;
+
+ set_bit(AFS_VNODE_PSEUDODIR, &vnode->flags);
+ inode->i_flags |= S_NOATIME;
+ unlock_new_inode(inode);
+ _leave(" = %p", inode);
+ return inode;
+}
+
/*
* inode retrieval
*/
return 0;
}
+/*
+ * discard an AFS inode
+ */
+int afs_drop_inode(struct inode *inode)
+{
+ _enter("");
+
+ if (test_bit(AFS_VNODE_PSEUDODIR, &AFS_FS_I(inode)->flags))
+ return generic_delete_inode(inode);
+ else
+ return generic_drop_inode(inode);
+}
+
/*
* clear an AFS inode
*/
-void afs_clear_inode(struct inode *inode)
+void afs_evict_inode(struct inode *inode)
{
struct afs_permits *permits;
struct afs_vnode *vnode;
ASSERTCMP(inode->i_ino, ==, vnode->fid.vnode);
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
+
afs_give_up_callback(vnode);
if (vnode->server) {
struct afs_mount_params {
bool rwpath; /* T if the parent should be considered R/W */
bool force; /* T to force cell type */
+ bool autocell; /* T if set auto mount operation */
afs_voltype_t type; /* type of volume requested */
int volnamesz; /* size of volume name */
const char *volname; /* name of volume to mount */
#define AFS_VNODE_READLOCKED 7 /* set if vnode is read-locked on the server */
#define AFS_VNODE_WRITELOCKED 8 /* set if vnode is write-locked on the server */
#define AFS_VNODE_UNLOCKING 9 /* set if vnode is being unlocked on the server */
+#define AFS_VNODE_AUTOCELL 10 /* set if Vnode is an auto mount point */
+#define AFS_VNODE_PSEUDODIR 11 /* set if Vnode is a pseudo directory */
long acl_order; /* ACL check count (callback break count) */
#define afs_get_cell(C) do { atomic_inc(&(C)->usage); } while(0)
extern int afs_cell_init(char *);
-extern struct afs_cell *afs_cell_create(const char *, char *);
-extern struct afs_cell *afs_cell_lookup(const char *, unsigned);
+extern struct afs_cell *afs_cell_create(const char *, unsigned, char *, bool);
+extern struct afs_cell *afs_cell_lookup(const char *, unsigned, bool);
extern struct afs_cell *afs_grab_cell(struct afs_cell *);
extern void afs_put_cell(struct afs_cell *);
extern void afs_cell_purge(void);
/*
* inode.c
*/
+extern struct inode *afs_iget_autocell(struct inode *, const char *, int,
+ struct key *);
extern struct inode *afs_iget(struct super_block *, struct key *,
struct afs_fid *, struct afs_file_status *,
struct afs_callback *);
extern int afs_validate(struct afs_vnode *, struct key *);
extern int afs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
extern int afs_setattr(struct dentry *, struct iattr *);
-extern void afs_clear_inode(struct inode *);
+extern void afs_evict_inode(struct inode *);
+extern int afs_drop_inode(struct inode *);
/*
* main.c
* mntpt.c
*/
extern const struct inode_operations afs_mntpt_inode_operations;
+extern const struct inode_operations afs_autocell_inode_operations;
extern const struct file_operations afs_mntpt_file_operations;
extern int afs_mntpt_check_symlink(struct afs_vnode *, struct key *);
#define dbgprintk(FMT,...) \
printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
-/* make sure we maintain the format strings, even when debugging is disabled */
-static inline __attribute__((format(printf,1,2)))
-void _dbprintk(const char *fmt, ...)
-{
-}
-
#define kenter(FMT,...) dbgprintk("==> %s("FMT")",__func__ ,##__VA_ARGS__)
#define kleave(FMT,...) dbgprintk("<== %s()"FMT"",__func__ ,##__VA_ARGS__)
#define kdebug(FMT,...) dbgprintk(" "FMT ,##__VA_ARGS__)
} while (0)
#else
-#define _enter(FMT,...) _dbprintk("==> %s("FMT")",__func__ ,##__VA_ARGS__)
-#define _leave(FMT,...) _dbprintk("<== %s()"FMT"",__func__ ,##__VA_ARGS__)
-#define _debug(FMT,...) _dbprintk(" "FMT ,##__VA_ARGS__)
+#define _enter(FMT,...) no_printk("==> %s("FMT")",__func__ ,##__VA_ARGS__)
+#define _leave(FMT,...) no_printk("<== %s()"FMT"",__func__ ,##__VA_ARGS__)
+#define _debug(FMT,...) no_printk(" "FMT ,##__VA_ARGS__)
#endif
/*
.getattr = afs_getattr,
};
+const struct inode_operations afs_autocell_inode_operations = {
+ .follow_link = afs_mntpt_follow_link,
+ .getattr = afs_getattr,
+};
+
static LIST_HEAD(afs_vfsmounts);
static DECLARE_DELAYED_WORK(afs_mntpt_expiry_timer, afs_mntpt_expiry_timed_out);
{
struct afs_super_info *super;
struct vfsmount *mnt;
+ struct afs_vnode *vnode;
struct page *page;
- size_t size;
- char *buf, *devname, *options;
+ char *devname, *options;
+ bool rwpath = false;
int ret;
_enter("{%s}", mntpt->d_name.name);
BUG_ON(!mntpt->d_inode);
- ret = -EINVAL;
- size = mntpt->d_inode->i_size;
- if (size > PAGE_SIZE - 1)
- goto error_no_devname;
-
ret = -ENOMEM;
devname = (char *) get_zeroed_page(GFP_KERNEL);
if (!devname)
if (!options)
goto error_no_options;
- /* read the contents of the AFS special symlink */
- page = read_mapping_page(mntpt->d_inode->i_mapping, 0, NULL);
- if (IS_ERR(page)) {
- ret = PTR_ERR(page);
- goto error_no_page;
+ vnode = AFS_FS_I(mntpt->d_inode);
+ if (test_bit(AFS_VNODE_PSEUDODIR, &vnode->flags)) {
+ /* if the directory is a pseudo directory, use the d_name */
+ static const char afs_root_cell[] = ":root.cell.";
+ unsigned size = mntpt->d_name.len;
+
+ ret = -ENOENT;
+ if (size < 2 || size > AFS_MAXCELLNAME)
+ goto error_no_page;
+
+ if (mntpt->d_name.name[0] == '.') {
+ devname[0] = '#';
+ memcpy(devname + 1, mntpt->d_name.name, size - 1);
+ memcpy(devname + size, afs_root_cell,
+ sizeof(afs_root_cell));
+ rwpath = true;
+ } else {
+ devname[0] = '%';
+ memcpy(devname + 1, mntpt->d_name.name, size);
+ memcpy(devname + size + 1, afs_root_cell,
+ sizeof(afs_root_cell));
+ }
+ } else {
+ /* read the contents of the AFS special symlink */
+ loff_t size = i_size_read(mntpt->d_inode);
+ char *buf;
+
+ ret = -EINVAL;
+ if (size > PAGE_SIZE - 1)
+ goto error_no_page;
+
+ page = read_mapping_page(mntpt->d_inode->i_mapping, 0, NULL);
+ if (IS_ERR(page)) {
+ ret = PTR_ERR(page);
+ goto error_no_page;
+ }
+
+ ret = -EIO;
+ if (PageError(page))
+ goto error;
+
+ buf = kmap_atomic(page, KM_USER0);
+ memcpy(devname, buf, size);
+ kunmap_atomic(buf, KM_USER0);
+ page_cache_release(page);
+ page = NULL;
}
- ret = -EIO;
- if (PageError(page))
- goto error;
-
- buf = kmap_atomic(page, KM_USER0);
- memcpy(devname, buf, size);
- kunmap_atomic(buf, KM_USER0);
- page_cache_release(page);
- page = NULL;
-
/* work out what options we want */
super = AFS_FS_S(mntpt->d_sb);
memcpy(options, "cell=", 5);
strcpy(options + 5, super->volume->cell->name);
- if (super->volume->type == AFSVL_RWVOL)
+ if (super->volume->type == AFSVL_RWVOL || rwpath)
strcat(options, ",rwpath");
/* try and do the mount */
if (strcmp(kbuf, "add") == 0) {
struct afs_cell *cell;
- cell = afs_cell_create(name, args);
+ cell = afs_cell_create(name, strlen(name), args, false);
if (IS_ERR(cell)) {
ret = PTR_ERR(cell);
goto done;
ret = kernel_bind(socket, (struct sockaddr *) &srx, sizeof(srx));
if (ret < 0) {
sock_release(socket);
+ destroy_workqueue(afs_async_calls);
_leave(" = %d [bind]", ret);
return ret;
}
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mount.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
static const struct super_operations afs_super_ops = {
.statfs = afs_statfs,
.alloc_inode = afs_alloc_inode,
+ .drop_inode = afs_drop_inode,
.destroy_inode = afs_destroy_inode,
- .clear_inode = afs_clear_inode,
+ .evict_inode = afs_evict_inode,
.put_super = afs_put_super,
.show_options = generic_show_options,
};
afs_opt_cell,
afs_opt_rwpath,
afs_opt_vol,
+ afs_opt_autocell,
};
static const match_table_t afs_options_list = {
{ afs_opt_cell, "cell=%s" },
{ afs_opt_rwpath, "rwpath" },
{ afs_opt_vol, "vol=%s" },
+ { afs_opt_autocell, "autocell" },
{ afs_no_opt, NULL },
};
switch (token) {
case afs_opt_cell:
cell = afs_cell_lookup(args[0].from,
- args[0].to - args[0].from);
+ args[0].to - args[0].from,
+ false);
if (IS_ERR(cell))
return PTR_ERR(cell);
afs_put_cell(params->cell);
*devname = args[0].from;
break;
+ case afs_opt_autocell:
+ params->autocell = 1;
+ break;
+
default:
printk(KERN_ERR "kAFS:"
" Unknown or invalid mount option: '%s'\n", p);
/* lookup the cell record */
if (cellname || !params->cell) {
- cell = afs_cell_lookup(cellname, cellnamesz);
+ cell = afs_cell_lookup(cellname, cellnamesz, true);
if (IS_ERR(cell)) {
- printk(KERN_ERR "kAFS: unable to lookup cell '%s'\n",
- cellname ?: "");
+ printk(KERN_ERR "kAFS: unable to lookup cell '%*.*s'\n",
+ cellnamesz, cellnamesz, cellname ?: "");
return PTR_ERR(cell);
}
afs_put_cell(params->cell);
if (IS_ERR(inode))
goto error_inode;
+ if (params->autocell)
+ set_bit(AFS_VNODE_AUTOCELL, &AFS_FS_I(inode)->flags);
+
ret = -ENOMEM;
root = d_alloc_root(inode);
if (!root)
#include <linux/fcntl.h>
#include <linux/security.h>
-/* Taken over from the old code... */
-
-/* POSIX UID/GID verification for setting inode attributes. */
+/**
+ * inode_change_ok - check if attribute changes to an inode are allowed
+ * @inode: inode to check
+ * @attr: attributes to change
+ *
+ * Check if we are allowed to change the attributes contained in @attr
+ * in the given inode. This includes the normal unix access permission
+ * checks, as well as checks for rlimits and others.
+ *
+ * Should be called as the first thing in ->setattr implementations,
+ * possibly after taking additional locks.
+ */
int inode_change_ok(const struct inode *inode, struct iattr *attr)
{
- int retval = -EPERM;
unsigned int ia_valid = attr->ia_valid;
+ /*
+ * First check size constraints. These can't be overriden using
+ * ATTR_FORCE.
+ */
+ if (ia_valid & ATTR_SIZE) {
+ int error = inode_newsize_ok(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
/* If force is set do it anyway. */
if (ia_valid & ATTR_FORCE)
- goto fine;
+ return 0;
/* Make sure a caller can chown. */
if ((ia_valid & ATTR_UID) &&
(current_fsuid() != inode->i_uid ||
attr->ia_uid != inode->i_uid) && !capable(CAP_CHOWN))
- goto error;
+ return -EPERM;
/* Make sure caller can chgrp. */
if ((ia_valid & ATTR_GID) &&
(current_fsuid() != inode->i_uid ||
(!in_group_p(attr->ia_gid) && attr->ia_gid != inode->i_gid)) &&
!capable(CAP_CHOWN))
- goto error;
+ return -EPERM;
/* Make sure a caller can chmod. */
if (ia_valid & ATTR_MODE) {
if (!is_owner_or_cap(inode))
- goto error;
+ return -EPERM;
/* Also check the setgid bit! */
if (!in_group_p((ia_valid & ATTR_GID) ? attr->ia_gid :
inode->i_gid) && !capable(CAP_FSETID))
/* Check for setting the inode time. */
if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)) {
if (!is_owner_or_cap(inode))
- goto error;
+ return -EPERM;
}
-fine:
- retval = 0;
-error:
- return retval;
+
+ return 0;
}
EXPORT_SYMBOL(inode_change_ok);
EXPORT_SYMBOL(inode_newsize_ok);
/**
- * generic_setattr - copy simple metadata updates into the generic inode
+ * setattr_copy - copy simple metadata updates into the generic inode
* @inode: the inode to be updated
* @attr: the new attributes
*
- * generic_setattr must be called with i_mutex held.
+ * setattr_copy must be called with i_mutex held.
*
- * generic_setattr updates the inode's metadata with that specified
+ * setattr_copy updates the inode's metadata with that specified
* in attr. Noticably missing is inode size update, which is more complex
- * as it requires pagecache updates. See simple_setsize.
+ * as it requires pagecache updates.
*
* The inode is not marked as dirty after this operation. The rationale is
* that for "simple" filesystems, the struct inode is the inode storage.
* The caller is free to mark the inode dirty afterwards if needed.
*/
-void generic_setattr(struct inode *inode, const struct iattr *attr)
+void setattr_copy(struct inode *inode, const struct iattr *attr)
{
unsigned int ia_valid = attr->ia_valid;
inode->i_mode = mode;
}
}
-EXPORT_SYMBOL(generic_setattr);
-
-/*
- * note this function is deprecated, the new truncate sequence should be
- * used instead -- see eg. simple_setsize, generic_setattr.
- */
-int inode_setattr(struct inode *inode, const struct iattr *attr)
-{
- unsigned int ia_valid = attr->ia_valid;
-
- if (ia_valid & ATTR_SIZE &&
- attr->ia_size != i_size_read(inode)) {
- int error;
-
- error = vmtruncate(inode, attr->ia_size);
- if (error)
- return error;
- }
-
- generic_setattr(inode, attr);
-
- mark_inode_dirty(inode);
-
- return 0;
-}
-EXPORT_SYMBOL(inode_setattr);
+EXPORT_SYMBOL(setattr_copy);
int notify_change(struct dentry * dentry, struct iattr * attr)
{
if (ia_valid & ATTR_SIZE)
down_write(&dentry->d_inode->i_alloc_sem);
- if (inode->i_op && inode->i_op->setattr) {
+ if (inode->i_op->setattr)
error = inode->i_op->setattr(dentry, attr);
- } else {
- error = inode_change_ok(inode, attr);
- if (!error)
- error = inode_setattr(inode, attr);
- }
+ else
+ error = simple_setattr(dentry, attr);
if (ia_valid & ATTR_SIZE)
up_write(&dentry->d_inode->i_alloc_sem);
#include <linux/slab.h>
#include <linux/param.h>
#include <linux/time.h>
+#include <linux/compat.h>
#include <linux/smp_lock.h>
#include "autofs_i.h"
static int autofs_root_unlink(struct inode *,struct dentry *);
static int autofs_root_rmdir(struct inode *,struct dentry *);
static int autofs_root_mkdir(struct inode *,struct dentry *,int);
-static int autofs_root_ioctl(struct inode *, struct file *,unsigned int,unsigned long);
+static long autofs_root_ioctl(struct file *,unsigned int,unsigned long);
+static long autofs_root_compat_ioctl(struct file *,unsigned int,unsigned long);
const struct file_operations autofs_root_operations = {
.llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = autofs_root_readdir,
- .ioctl = autofs_root_ioctl,
+ .unlocked_ioctl = autofs_root_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = autofs_root_compat_ioctl,
+#endif
};
const struct inode_operations autofs_root_inode_operations = {
}
/* Get/set timeout ioctl() operation */
+#ifdef CONFIG_COMPAT
+static inline int autofs_compat_get_set_timeout(struct autofs_sb_info *sbi,
+ unsigned int __user *p)
+{
+ unsigned long ntimeout;
+
+ if (get_user(ntimeout, p) ||
+ put_user(sbi->exp_timeout / HZ, p))
+ return -EFAULT;
+
+ if (ntimeout > UINT_MAX/HZ)
+ sbi->exp_timeout = 0;
+ else
+ sbi->exp_timeout = ntimeout * HZ;
+
+ return 0;
+}
+#endif
+
static inline int autofs_get_set_timeout(struct autofs_sb_info *sbi,
unsigned long __user *p)
{
* ioctl()'s on the root directory is the chief method for the daemon to
* generate kernel reactions
*/
-static int autofs_root_ioctl(struct inode *inode, struct file *filp,
+static int autofs_do_root_ioctl(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg)
{
struct autofs_sb_info *sbi = autofs_sbi(inode->i_sb);
return 0;
case AUTOFS_IOC_PROTOVER: /* Get protocol version */
return autofs_get_protover(argp);
+#ifdef CONFIG_COMPAT
+ case AUTOFS_IOC_SETTIMEOUT32:
+ return autofs_compat_get_set_timeout(sbi, argp);
+#endif
case AUTOFS_IOC_SETTIMEOUT:
return autofs_get_set_timeout(sbi, argp);
case AUTOFS_IOC_EXPIRE:
default:
return -ENOSYS;
}
+
+}
+
+static long autofs_root_ioctl(struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret;
+
+ lock_kernel();
+ ret = autofs_do_root_ioctl(filp->f_path.dentry->d_inode,
+ filp, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
+#ifdef CONFIG_COMPAT
+static long autofs_root_compat_ioctl(struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ int ret;
+
+ lock_kernel();
+ if (cmd == AUTOFS_IOC_READY || cmd == AUTOFS_IOC_FAIL)
+ ret = autofs_do_root_ioctl(inode, filp, cmd, arg);
+ else
+ ret = autofs_do_root_ioctl(inode, filp, cmd,
+ (unsigned long)compat_ptr(arg));
+ unlock_kernel();
+
+ return ret;
}
+#endif
#include <linux/slab.h>
#include <linux/param.h>
#include <linux/time.h>
+#include <linux/compat.h>
#include <linux/smp_lock.h>
+
#include "autofs_i.h"
static int autofs4_dir_symlink(struct inode *,struct dentry *,const char *);
static int autofs4_dir_rmdir(struct inode *,struct dentry *);
static int autofs4_dir_mkdir(struct inode *,struct dentry *,int);
static long autofs4_root_ioctl(struct file *,unsigned int,unsigned long);
+static long autofs4_root_compat_ioctl(struct file *,unsigned int,unsigned long);
static int autofs4_dir_open(struct inode *inode, struct file *file);
static struct dentry *autofs4_lookup(struct inode *,struct dentry *, struct nameidata *);
static void *autofs4_follow_link(struct dentry *, struct nameidata *);
.readdir = dcache_readdir,
.llseek = dcache_dir_lseek,
.unlocked_ioctl = autofs4_root_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = autofs4_root_compat_ioctl,
+#endif
};
const struct file_operations autofs4_dir_operations = {
}
/* Initialize expiry counter after successful mount */
- if (ino)
- ino->last_used = jiffies;
+ ino->last_used = jiffies;
spin_lock(&sbi->fs_lock);
ino->flags &= ~AUTOFS_INF_PENDING;
}
/* Get/set timeout ioctl() operation */
+#ifdef CONFIG_COMPAT
+static inline int autofs4_compat_get_set_timeout(struct autofs_sb_info *sbi,
+ compat_ulong_t __user *p)
+{
+ int rv;
+ unsigned long ntimeout;
+
+ if ((rv = get_user(ntimeout, p)) ||
+ (rv = put_user(sbi->exp_timeout/HZ, p)))
+ return rv;
+
+ if (ntimeout > UINT_MAX/HZ)
+ sbi->exp_timeout = 0;
+ else
+ sbi->exp_timeout = ntimeout * HZ;
+
+ return 0;
+}
+#endif
+
static inline int autofs4_get_set_timeout(struct autofs_sb_info *sbi,
unsigned long __user *p)
{
return autofs4_get_protosubver(sbi, p);
case AUTOFS_IOC_SETTIMEOUT:
return autofs4_get_set_timeout(sbi, p);
+#ifdef CONFIG_COMPAT
+ case AUTOFS_IOC_SETTIMEOUT32:
+ return autofs4_compat_get_set_timeout(sbi, p);
+#endif
case AUTOFS_IOC_ASKUMOUNT:
return autofs4_ask_umount(filp->f_path.mnt, p);
return ret;
}
+
+#ifdef CONFIG_COMPAT
+static long autofs4_root_compat_ioctl(struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ int ret;
+
+ lock_kernel();
+ if (cmd == AUTOFS_IOC_READY || cmd == AUTOFS_IOC_FAIL)
+ ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
+ else
+ ret = autofs4_root_ioctl_unlocked(inode, filp, cmd,
+ (unsigned long)compat_ptr(arg));
+ unlock_kernel();
+
+ return ret;
+}
+#endif
return POLLERR;
}
-static int bad_file_ioctl (struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- return -EIO;
-}
-
static long bad_file_unlocked_ioctl(struct file *file, unsigned cmd,
unsigned long arg)
{
.aio_write = bad_file_aio_write,
.readdir = bad_file_readdir,
.poll = bad_file_poll,
- .ioctl = bad_file_ioctl,
.unlocked_ioctl = bad_file_unlocked_ioctl,
.compat_ioctl = bad_file_compat_ioctl,
.mmap = bad_file_mmap,
unsigned long si_lf_eblk;
unsigned long si_lasti;
unsigned long *si_imap;
- struct buffer_head *si_sbh; /* buffer header w/superblock */
struct mutex bfs_lock;
};
struct super_block *sb = inode->i_sb;
struct bfs_sb_info *info = BFS_SB(sb);
struct bfs_inode_info *bi = BFS_I(inode);
- struct buffer_head *sbh = info->si_sbh;
phys = bi->i_sblock + block;
if (!create) {
info->si_freeb -= phys - bi->i_eblock;
info->si_lf_eblk = bi->i_eblock = phys;
mark_inode_dirty(inode);
- mark_buffer_dirty(sbh);
err = 0;
goto out;
}
*/
info->si_freeb -= bi->i_eblock - bi->i_sblock + 1 - inode->i_blocks;
mark_inode_dirty(inode);
- mark_buffer_dirty(sbh);
map_bh(bh_result, sb, phys);
out:
mutex_unlock(&info->bfs_lock);
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags,
- pagep, fsdata, bfs_get_block);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep,
+ bfs_get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t bfs_bmap(struct address_space *mapping, sector_t block)
#define dprintf(x...)
#endif
-static void bfs_write_super(struct super_block *s);
void dump_imap(const char *prefix, struct super_block *s);
struct inode *bfs_iget(struct super_block *sb, unsigned long ino)
return ERR_PTR(-EIO);
}
+static struct bfs_inode *find_inode(struct super_block *sb, u16 ino, struct buffer_head **p)
+{
+ if ((ino < BFS_ROOT_INO) || (ino > BFS_SB(sb)->si_lasti)) {
+ printf("Bad inode number %s:%08x\n", sb->s_id, ino);
+ return ERR_PTR(-EIO);
+ }
+
+ ino -= BFS_ROOT_INO;
+
+ *p = sb_bread(sb, 1 + ino / BFS_INODES_PER_BLOCK);
+ if (!*p) {
+ printf("Unable to read inode %s:%08x\n", sb->s_id, ino);
+ return ERR_PTR(-EIO);
+ }
+
+ return (struct bfs_inode *)(*p)->b_data + ino % BFS_INODES_PER_BLOCK;
+}
+
static int bfs_write_inode(struct inode *inode, struct writeback_control *wbc)
{
struct bfs_sb_info *info = BFS_SB(inode->i_sb);
unsigned long i_sblock;
struct bfs_inode *di;
struct buffer_head *bh;
- int block, off;
int err = 0;
dprintf("ino=%08x\n", ino);
- if ((ino < BFS_ROOT_INO) || (ino > BFS_SB(inode->i_sb)->si_lasti)) {
- printf("Bad inode number %s:%08x\n", inode->i_sb->s_id, ino);
- return -EIO;
- }
+ di = find_inode(inode->i_sb, ino, &bh);
+ if (IS_ERR(di))
+ return PTR_ERR(di);
mutex_lock(&info->bfs_lock);
- block = (ino - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
- bh = sb_bread(inode->i_sb, block);
- if (!bh) {
- printf("Unable to read inode %s:%08x\n",
- inode->i_sb->s_id, ino);
- mutex_unlock(&info->bfs_lock);
- return -EIO;
- }
-
- off = (ino - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
- di = (struct bfs_inode *)bh->b_data + off;
if (ino == BFS_ROOT_INO)
di->i_vtype = cpu_to_le32(BFS_VDIR);
return err;
}
-static void bfs_delete_inode(struct inode *inode)
+static void bfs_evict_inode(struct inode *inode)
{
unsigned long ino = inode->i_ino;
struct bfs_inode *di;
struct buffer_head *bh;
- int block, off;
struct super_block *s = inode->i_sb;
struct bfs_sb_info *info = BFS_SB(s);
struct bfs_inode_info *bi = BFS_I(inode);
dprintf("ino=%08lx\n", ino);
truncate_inode_pages(&inode->i_data, 0);
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
- if ((ino < BFS_ROOT_INO) || (ino > info->si_lasti)) {
- printf("invalid ino=%08lx\n", ino);
+ if (inode->i_nlink)
return;
- }
-
- inode->i_size = 0;
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
- mutex_lock(&info->bfs_lock);
- mark_inode_dirty(inode);
- block = (ino - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
- bh = sb_bread(s, block);
- if (!bh) {
- printf("Unable to read inode %s:%08lx\n",
- inode->i_sb->s_id, ino);
- mutex_unlock(&info->bfs_lock);
+ di = find_inode(s, inode->i_ino, &bh);
+ if (IS_ERR(di))
return;
- }
- off = (ino - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
- di = (struct bfs_inode *)bh->b_data + off;
- memset((void *)di, 0, sizeof(struct bfs_inode));
+
+ mutex_lock(&info->bfs_lock);
+ /* clear on-disk inode */
+ memset(di, 0, sizeof(struct bfs_inode));
mark_buffer_dirty(bh);
brelse(bh);
* "last block of the last file" even if there is no
* real file there, saves us 1 gap.
*/
- if (info->si_lf_eblk == bi->i_eblock) {
+ if (info->si_lf_eblk == bi->i_eblock)
info->si_lf_eblk = bi->i_sblock - 1;
- mark_buffer_dirty(info->si_sbh);
- }
mutex_unlock(&info->bfs_lock);
- clear_inode(inode);
-}
-
-static int bfs_sync_fs(struct super_block *sb, int wait)
-{
- struct bfs_sb_info *info = BFS_SB(sb);
-
- mutex_lock(&info->bfs_lock);
- mark_buffer_dirty(info->si_sbh);
- sb->s_dirt = 0;
- mutex_unlock(&info->bfs_lock);
-
- return 0;
-}
-
-static void bfs_write_super(struct super_block *sb)
-{
- if (!(sb->s_flags & MS_RDONLY))
- bfs_sync_fs(sb, 1);
- else
- sb->s_dirt = 0;
}
static void bfs_put_super(struct super_block *s)
lock_kernel();
- if (s->s_dirt)
- bfs_write_super(s);
-
- brelse(info->si_sbh);
mutex_destroy(&info->bfs_lock);
kfree(info->si_imap);
kfree(info);
.alloc_inode = bfs_alloc_inode,
.destroy_inode = bfs_destroy_inode,
.write_inode = bfs_write_inode,
- .delete_inode = bfs_delete_inode,
+ .evict_inode = bfs_evict_inode,
.put_super = bfs_put_super,
- .write_super = bfs_write_super,
- .sync_fs = bfs_sync_fs,
.statfs = bfs_statfs,
};
static int bfs_fill_super(struct super_block *s, void *data, int silent)
{
- struct buffer_head *bh;
+ struct buffer_head *bh, *sbh;
struct bfs_super_block *bfs_sb;
struct inode *inode;
unsigned i, imap_len;
sb_set_blocksize(s, BFS_BSIZE);
- info->si_sbh = sb_bread(s, 0);
- if (!info->si_sbh)
+ sbh = sb_bread(s, 0);
+ if (!sbh)
goto out;
- bfs_sb = (struct bfs_super_block *)info->si_sbh->b_data;
+ bfs_sb = (struct bfs_super_block *)sbh->b_data;
if (le32_to_cpu(bfs_sb->s_magic) != BFS_MAGIC) {
if (!silent)
printf("No BFS filesystem on %s (magic=%08x)\n",
info->si_lf_eblk = eblock;
}
brelse(bh);
- if (!(s->s_flags & MS_RDONLY)) {
- mark_buffer_dirty(info->si_sbh);
- s->s_dirt = 1;
- }
+ brelse(sbh);
dump_imap("read_super", s);
return 0;
out2:
kfree(info->si_imap);
out1:
- brelse(info->si_sbh);
+ brelse(sbh);
out:
mutex_destroy(&info->bfs_lock);
kfree(info);
Node *fmt;
struct file * interp_file = NULL;
char iname[BINPRM_BUF_SIZE];
- char *iname_addr = iname;
+ const char *iname_addr = iname;
int retval;
int fd_binary = -1;
return inode;
}
-static void bm_clear_inode(struct inode *inode)
+static void bm_evict_inode(struct inode *inode)
{
+ end_writeback(inode);
kfree(inode->i_private);
}
static const struct super_operations s_ops = {
.statfs = simple_statfs,
- .clear_inode = bm_clear_inode,
+ .evict_inode = bm_evict_inode,
};
static int bm_fill_super(struct super_block * sb, void * data, int silent)
static int load_script(struct linux_binprm *bprm,struct pt_regs *regs)
{
- char *cp, *i_name, *i_arg;
+ const char *i_arg, *i_name;
+ char *cp;
struct file *file;
char interp[BINPRM_BUF_SIZE];
int retval;
if (!bio)
goto out_bmd;
- bio->bi_rw |= (!write_to_vm << BIO_RW);
+ if (!write_to_vm)
+ bio->bi_rw |= REQ_WRITE;
ret = 0;
* set data direction, and check if mapped pages need bouncing
*/
if (!write_to_vm)
- bio->bi_rw |= (1 << BIO_RW);
+ bio->bi_rw |= REQ_WRITE;
bio->bi_bdev = bdev;
bio->bi_flags |= (1 << BIO_USER_MAPPED);
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
- return blockdev_direct_IO_no_locking_newtrunc(rw, iocb, inode,
- I_BDEV(inode), iov, offset, nr_segs,
- blkdev_get_blocks, NULL);
+ return __blockdev_direct_IO(rw, iocb, inode, I_BDEV(inode), iov, offset,
+ nr_segs, blkdev_get_blocks, NULL, NULL, 0);
}
int __sync_blockdev(struct block_device *bdev, int wait)
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return block_write_begin_newtrunc(file, mapping, pos, len, flags,
- pagep, fsdata, blkdev_get_block);
+ return block_write_begin(mapping, pos, len, flags, pagep,
+ blkdev_get_block);
}
static int blkdev_write_end(struct file *file, struct address_space *mapping,
inode->i_mapping = &inode->i_data;
}
-static void bdev_clear_inode(struct inode *inode)
+static void bdev_evict_inode(struct inode *inode)
{
struct block_device *bdev = &BDEV_I(inode)->bdev;
struct list_head *p;
+ truncate_inode_pages(&inode->i_data, 0);
+ invalidate_inode_buffers(inode); /* is it needed here? */
+ end_writeback(inode);
spin_lock(&bdev_lock);
while ( (p = bdev->bd_inodes.next) != &bdev->bd_inodes ) {
__bd_forget(list_entry(p, struct inode, i_devices));
.alloc_inode = bdev_alloc_inode,
.destroy_inode = bdev_destroy_inode,
.drop_inode = generic_delete_inode,
- .clear_inode = bdev_clear_inode,
+ .evict_inode = bdev_evict_inode,
};
static int bd_get_sb(struct file_system_type *fs_type,
/*
* hooks: /n/, see "layering violations".
*/
- ret = devcgroup_inode_permission(bdev->bd_inode, perm);
- if (ret != 0) {
- bdput(bdev);
- return ret;
+ if (!for_part) {
+ ret = devcgroup_inode_permission(bdev->bd_inode, perm);
+ if (ret != 0) {
+ bdput(bdev);
+ return ret;
+ }
}
- lock_kernel();
restart:
ret = -ENXIO;
disk = get_gendisk(bdev->bd_dev, &partno);
if (!disk)
- goto out_unlock_kernel;
+ goto out;
mutex_lock_nested(&bdev->bd_mutex, for_part);
if (!bdev->bd_openers) {
if (for_part)
bdev->bd_part_count++;
mutex_unlock(&bdev->bd_mutex);
- unlock_kernel();
return 0;
out_clear:
bdev->bd_contains = NULL;
out_unlock_bdev:
mutex_unlock(&bdev->bd_mutex);
- out_unlock_kernel:
- unlock_kernel();
-
+ out:
if (disk)
module_put(disk->fops->owner);
put_disk(disk);
struct block_device *victim = NULL;
mutex_lock_nested(&bdev->bd_mutex, for_part);
- lock_kernel();
if (for_part)
bdev->bd_part_count--;
victim = bdev->bd_contains;
bdev->bd_contains = NULL;
}
- unlock_kernel();
mutex_unlock(&bdev->bd_mutex);
bdput(bdev);
if (victim)
pgoff_t offset, pgoff_t last_index);
int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
int btrfs_readpage(struct file *file, struct page *page);
-void btrfs_delete_inode(struct inode *inode);
+void btrfs_evict_inode(struct inode *inode);
void btrfs_put_inode(struct inode *inode);
int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc);
void btrfs_dirty_inode(struct inode *inode);
struct inode *btrfs_alloc_inode(struct super_block *sb);
void btrfs_destroy_inode(struct inode *inode);
-void btrfs_drop_inode(struct inode *inode);
+int btrfs_drop_inode(struct inode *inode);
int btrfs_init_cachep(void);
void btrfs_destroy_cachep(void);
long btrfs_ioctl_trans_end(struct file *file);
end_io_wq->work.func = end_workqueue_fn;
end_io_wq->work.flags = 0;
- if (bio->bi_rw & (1 << BIO_RW)) {
+ if (bio->bi_rw & REQ_WRITE) {
if (end_io_wq->metadata)
btrfs_queue_worker(&fs_info->endio_meta_write_workers,
&end_io_wq->work);
atomic_inc(&fs_info->nr_async_submits);
- if (rw & (1 << BIO_RW_SYNCIO))
+ if (rw & REQ_SYNC)
btrfs_set_work_high_prio(&async->work);
btrfs_queue_worker(&fs_info->workers, &async->work);
bio, 1);
BUG_ON(ret);
- if (!(rw & (1 << BIO_RW))) {
+ if (!(rw & REQ_WRITE)) {
/*
* called for a read, do the setup so that checksum validation
* can happen in the async kernel threads
* ram and up to date before trying to verify things. For
* blocksize <= pagesize, it is basically a noop
*/
- if (!(bio->bi_rw & (1 << BIO_RW)) && end_io_wq->metadata &&
+ if (!(bio->bi_rw & REQ_WRITE) && end_io_wq->metadata &&
!bio_ready_for_csum(bio)) {
btrfs_queue_worker(&fs_info->endio_meta_workers,
&end_io_wq->work);
ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
BUG_ON(ret);
- if (!(rw & (1 << BIO_RW))) {
+ if (!(rw & REQ_WRITE)) {
if (bio_flags & EXTENT_BIO_COMPRESSED) {
return btrfs_submit_compressed_read(inode, bio,
mirror_num, bio_flags);
bio->bi_size = 0;
bio_add_page(bio, page, failrec->len, start - page_offset(page));
- if (failed_bio->bi_rw & (1 << BIO_RW))
+ if (failed_bio->bi_rw & REQ_WRITE)
rw = WRITE;
else
rw = READ;
dir->i_mtime = dir->i_ctime = CURRENT_TIME;
ret = btrfs_update_inode(trans, root, dir);
BUG_ON(ret);
- dir->i_sb->s_dirt = 1;
btrfs_free_path(path);
return 0;
if (err)
return err;
}
- attr->ia_valid &= ~ATTR_SIZE;
- if (attr->ia_valid)
- err = inode_setattr(inode, attr);
+ if (attr->ia_valid) {
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
+ if (attr->ia_valid & ATTR_MODE)
+ err = btrfs_acl_chmod(inode);
+ }
- if (!err && ((attr->ia_valid & ATTR_MODE)))
- err = btrfs_acl_chmod(inode);
return err;
}
-void btrfs_delete_inode(struct inode *inode)
+void btrfs_evict_inode(struct inode *inode)
{
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
int ret;
truncate_inode_pages(&inode->i_data, 0);
+ if (inode->i_nlink && btrfs_root_refs(&root->root_item) != 0)
+ goto no_delete;
+
if (is_bad_inode(inode)) {
btrfs_orphan_del(NULL, inode);
goto no_delete;
}
+ /* do we really want it for ->i_nlink > 0 and zero btrfs_root_refs? */
btrfs_wait_ordered_range(inode, 0, (u64)-1);
if (root->fs_info->log_root_recovering) {
btrfs_end_transaction(trans, root);
btrfs_btree_balance_dirty(root, nr);
no_delete:
- clear_inode(inode);
+ end_writeback(inode);
return;
}
p = &parent->rb_right;
else {
WARN_ON(!(entry->vfs_inode.i_state &
- (I_WILL_FREE | I_FREEING | I_CLEAR)));
+ (I_WILL_FREE | I_FREEING)));
rb_erase(parent, &root->inode_tree);
RB_CLEAR_NODE(parent);
spin_unlock(&root->inode_lock);
if (atomic_read(&inode->i_count) > 1)
d_prune_aliases(inode);
/*
- * btrfs_drop_inode will remove it from
+ * btrfs_drop_inode will have it removed from
* the inode cache when its usage count
* hits zero.
*/
struct bio_vec *bvec = bio->bi_io_vec;
u64 start;
int skip_sum;
- int write = rw & (1 << BIO_RW);
+ int write = rw & REQ_WRITE;
int ret = 0;
skip_sum = BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM;
kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode));
}
-void btrfs_drop_inode(struct inode *inode)
+int btrfs_drop_inode(struct inode *inode)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
- if (inode->i_nlink > 0 && btrfs_root_refs(&root->root_item) == 0)
- generic_delete_inode(inode);
+
+ if (btrfs_root_refs(&root->root_item) == 0)
+ return 1;
else
- generic_drop_inode(inode);
+ return generic_drop_inode(inode);
}
static void init_once(void *foo)
static const struct super_operations btrfs_super_ops = {
.drop_inode = btrfs_drop_inode,
- .delete_inode = btrfs_delete_inode,
+ .evict_inode = btrfs_evict_inode,
.put_super = btrfs_put_super,
.sync_fs = btrfs_sync_fs,
.show_options = btrfs_show_options,
BUG_ON(atomic_read(&cur->bi_cnt) == 0);
- if (bio_rw_flagged(cur, BIO_RW_SYNCIO))
+ if (cur->bi_rw & REQ_SYNC)
num_sync_run++;
submit_bio(cur->bi_rw, cur);
int max_errors = 0;
struct btrfs_multi_bio *multi = NULL;
- if (multi_ret && !(rw & (1 << BIO_RW)))
+ if (multi_ret && !(rw & REQ_WRITE))
stripes_allocated = 1;
again:
if (multi_ret) {
mirror_num = 0;
/* if our multi bio struct is too small, back off and try again */
- if (rw & (1 << BIO_RW)) {
+ if (rw & REQ_WRITE) {
if (map->type & (BTRFS_BLOCK_GROUP_RAID1 |
BTRFS_BLOCK_GROUP_DUP)) {
stripes_required = map->num_stripes;
max_errors = 1;
}
}
- if (multi_ret && (rw & (1 << BIO_RW)) &&
+ if (multi_ret && (rw & REQ_WRITE) &&
stripes_allocated < stripes_required) {
stripes_allocated = map->num_stripes;
free_extent_map(em);
num_stripes = 1;
stripe_index = 0;
if (map->type & BTRFS_BLOCK_GROUP_RAID1) {
- if (unplug_page || (rw & (1 << BIO_RW)))
+ if (unplug_page || (rw & REQ_WRITE))
num_stripes = map->num_stripes;
else if (mirror_num)
stripe_index = mirror_num - 1;
}
} else if (map->type & BTRFS_BLOCK_GROUP_DUP) {
- if (rw & (1 << BIO_RW))
+ if (rw & REQ_WRITE)
num_stripes = map->num_stripes;
else if (mirror_num)
stripe_index = mirror_num - 1;
stripe_index = do_div(stripe_nr, factor);
stripe_index *= map->sub_stripes;
- if (unplug_page || (rw & (1 << BIO_RW)))
+ if (unplug_page || (rw & REQ_WRITE))
num_stripes = map->sub_stripes;
else if (mirror_num)
stripe_index += mirror_num - 1;
struct btrfs_pending_bios *pending_bios;
/* don't bother with additional async steps for reads, right now */
- if (!(rw & (1 << BIO_RW))) {
+ if (!(rw & REQ_WRITE)) {
bio_get(bio);
submit_bio(rw, bio);
bio_put(bio);
bio->bi_rw |= rw;
spin_lock(&device->io_lock);
- if (bio_rw_flagged(bio, BIO_RW_SYNCIO))
+ if (bio->bi_rw & REQ_SYNC)
pending_bios = &device->pending_sync_bios;
else
pending_bios = &device->pending_bios;
spin_unlock(lock);
/*
* Ensure any pending I/O completes so that
- * ll_rw_block() actually writes the current
- * contents - it is a noop if I/O is still in
- * flight on potentially older contents.
+ * write_dirty_buffer() actually writes the
+ * current contents - it is a noop if I/O is
+ * still in flight on potentially older
+ * contents.
*/
- ll_rw_block(SWRITE_SYNC_PLUG, 1, &bh);
+ write_dirty_buffer(bh, WRITE_SYNC_PLUG);
/*
* Kick off IO for the previous mapping. Note
}
EXPORT_SYMBOL(page_zero_new_buffers);
-static int __block_prepare_write(struct inode *inode, struct page *page,
- unsigned from, unsigned to, get_block_t *get_block)
+int block_prepare_write(struct page *page, unsigned from, unsigned to,
+ get_block_t *get_block)
{
+ struct inode *inode = page->mapping->host;
unsigned block_start, block_end;
sector_t block;
int err = 0;
if (!buffer_uptodate(*wait_bh))
err = -EIO;
}
- if (unlikely(err))
+ if (unlikely(err)) {
page_zero_new_buffers(page, from, to);
+ ClearPageUptodate(page);
+ }
return err;
}
+EXPORT_SYMBOL(block_prepare_write);
static int __block_commit_write(struct inode *inode, struct page *page,
unsigned from, unsigned to)
return 0;
}
-/*
- * Filesystems implementing the new truncate sequence should use the
- * _newtrunc postfix variant which won't incorrectly call vmtruncate.
- * The filesystem needs to handle block truncation upon failure.
- */
-int block_write_begin_newtrunc(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata,
- get_block_t *get_block)
+int __block_write_begin(struct page *page, loff_t pos, unsigned len,
+ get_block_t *get_block)
{
- struct inode *inode = mapping->host;
- int status = 0;
- struct page *page;
- pgoff_t index;
- unsigned start, end;
- int ownpage = 0;
+ unsigned start = pos & (PAGE_CACHE_SIZE - 1);
- index = pos >> PAGE_CACHE_SHIFT;
- start = pos & (PAGE_CACHE_SIZE - 1);
- end = start + len;
-
- page = *pagep;
- if (page == NULL) {
- ownpage = 1;
- page = grab_cache_page_write_begin(mapping, index, flags);
- if (!page) {
- status = -ENOMEM;
- goto out;
- }
- *pagep = page;
- } else
- BUG_ON(!PageLocked(page));
-
- status = __block_prepare_write(inode, page, start, end, get_block);
- if (unlikely(status)) {
- ClearPageUptodate(page);
-
- if (ownpage) {
- unlock_page(page);
- page_cache_release(page);
- *pagep = NULL;
- }
- }
-
-out:
- return status;
+ return block_prepare_write(page, start, start + len, get_block);
}
-EXPORT_SYMBOL(block_write_begin_newtrunc);
+EXPORT_SYMBOL(__block_write_begin);
/*
* block_write_begin takes care of the basic task of block allocation and
* bringing partial write blocks uptodate first.
*
- * If *pagep is not NULL, then block_write_begin uses the locked page
- * at *pagep rather than allocating its own. In this case, the page will
- * not be unlocked or deallocated on failure.
+ * The filesystem needs to handle block truncation upon failure.
*/
-int block_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata,
- get_block_t *get_block)
+int block_write_begin(struct address_space *mapping, loff_t pos, unsigned len,
+ unsigned flags, struct page **pagep, get_block_t *get_block)
{
- int ret;
+ pgoff_t index = pos >> PAGE_CACHE_SHIFT;
+ struct page *page;
+ int status;
- ret = block_write_begin_newtrunc(file, mapping, pos, len, flags,
- pagep, fsdata, get_block);
+ page = grab_cache_page_write_begin(mapping, index, flags);
+ if (!page)
+ return -ENOMEM;
- /*
- * prepare_write() may have instantiated a few blocks
- * outside i_size. Trim these off again. Don't need
- * i_size_read because we hold i_mutex.
- *
- * Filesystems which pass down their own page also cannot
- * call into vmtruncate here because it would lead to lock
- * inversion problems (*pagep is locked). This is a further
- * example of where the old truncate sequence is inadequate.
- */
- if (unlikely(ret) && *pagep == NULL) {
- loff_t isize = mapping->host->i_size;
- if (pos + len > isize)
- vmtruncate(mapping->host, isize);
+ status = __block_write_begin(page, pos, len, get_block);
+ if (unlikely(status)) {
+ unlock_page(page);
+ page_cache_release(page);
+ page = NULL;
}
- return ret;
+ *pagep = page;
+ return status;
}
EXPORT_SYMBOL(block_write_begin);
* For moronic filesystems that do not allow holes in file.
* We may have to extend the file.
*/
-int cont_write_begin_newtrunc(struct file *file, struct address_space *mapping,
+int cont_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata,
get_block_t *get_block, loff_t *bytes)
err = cont_expand_zero(file, mapping, pos, bytes);
if (err)
- goto out;
+ return err;
zerofrom = *bytes & ~PAGE_CACHE_MASK;
if (pos+len > *bytes && zerofrom & (blocksize-1)) {
(*bytes)++;
}
- *pagep = NULL;
- err = block_write_begin_newtrunc(file, mapping, pos, len,
- flags, pagep, fsdata, get_block);
-out:
- return err;
-}
-EXPORT_SYMBOL(cont_write_begin_newtrunc);
-
-int cont_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata,
- get_block_t *get_block, loff_t *bytes)
-{
- int ret;
-
- ret = cont_write_begin_newtrunc(file, mapping, pos, len, flags,
- pagep, fsdata, get_block, bytes);
- if (unlikely(ret)) {
- loff_t isize = mapping->host->i_size;
- if (pos + len > isize)
- vmtruncate(mapping->host, isize);
- }
-
- return ret;
+ return block_write_begin(mapping, pos, len, flags, pagep, get_block);
}
EXPORT_SYMBOL(cont_write_begin);
-int block_prepare_write(struct page *page, unsigned from, unsigned to,
- get_block_t *get_block)
-{
- struct inode *inode = page->mapping->host;
- int err = __block_prepare_write(inode, page, from, to, get_block);
- if (err)
- ClearPageUptodate(page);
- return err;
-}
-EXPORT_SYMBOL(block_prepare_write);
-
int block_commit_write(struct page *page, unsigned from, unsigned to)
{
struct inode *inode = page->mapping->host;
}
/*
- * Filesystems implementing the new truncate sequence should use the
- * _newtrunc postfix variant which won't incorrectly call vmtruncate.
+ * On entry, the page is fully not uptodate.
+ * On exit the page is fully uptodate in the areas outside (from,to)
* The filesystem needs to handle block truncation upon failure.
*/
-int nobh_write_begin_newtrunc(struct file *file, struct address_space *mapping,
+int nobh_write_begin(struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata,
get_block_t *get_block)
unlock_page(page);
page_cache_release(page);
*pagep = NULL;
- return block_write_begin_newtrunc(file, mapping, pos, len,
- flags, pagep, fsdata, get_block);
+ return block_write_begin(mapping, pos, len, flags, pagep,
+ get_block);
}
if (PageMappedToDisk(page))
return ret;
}
-EXPORT_SYMBOL(nobh_write_begin_newtrunc);
-
-/*
- * On entry, the page is fully not uptodate.
- * On exit the page is fully uptodate in the areas outside (from,to)
- */
-int nobh_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata,
- get_block_t *get_block)
-{
- int ret;
-
- ret = nobh_write_begin_newtrunc(file, mapping, pos, len, flags,
- pagep, fsdata, get_block);
-
- /*
- * prepare_write() may have instantiated a few blocks
- * outside i_size. Trim these off again. Don't need
- * i_size_read because we hold i_mutex.
- */
- if (unlikely(ret)) {
- loff_t isize = mapping->host->i_size;
- if (pos + len > isize)
- vmtruncate(mapping->host, isize);
- }
-
- return ret;
-}
EXPORT_SYMBOL(nobh_write_begin);
int nobh_write_end(struct file *file, struct address_space *mapping,
BUG_ON(buffer_delay(bh));
BUG_ON(buffer_unwritten(bh));
- /*
- * Mask in barrier bit for a write (could be either a WRITE or a
- * WRITE_SYNC
- */
- if (buffer_ordered(bh) && (rw & WRITE))
- rw |= WRITE_BARRIER;
-
/*
* Only clear out a write error when rewriting
*/
/**
* ll_rw_block: low-level access to block devices (DEPRECATED)
- * @rw: whether to %READ or %WRITE or %SWRITE or maybe %READA (readahead)
+ * @rw: whether to %READ or %WRITE or maybe %READA (readahead)
* @nr: number of &struct buffer_heads in the array
* @bhs: array of pointers to &struct buffer_head
*
* ll_rw_block() takes an array of pointers to &struct buffer_heads, and
* requests an I/O operation on them, either a %READ or a %WRITE. The third
- * %SWRITE is like %WRITE only we make sure that the *current* data in buffers
- * are sent to disk. The fourth %READA option is described in the documentation
- * for generic_make_request() which ll_rw_block() calls.
+ * %READA option is described in the documentation for generic_make_request()
+ * which ll_rw_block() calls.
*
* This function drops any buffer that it cannot get a lock on (with the
- * BH_Lock state bit) unless SWRITE is required, any buffer that appears to be
- * clean when doing a write request, and any buffer that appears to be
- * up-to-date when doing read request. Further it marks as clean buffers that
- * are processed for writing (the buffer cache won't assume that they are
- * actually clean until the buffer gets unlocked).
+ * BH_Lock state bit), any buffer that appears to be clean when doing a write
+ * request, and any buffer that appears to be up-to-date when doing read
+ * request. Further it marks as clean buffers that are processed for
+ * writing (the buffer cache won't assume that they are actually clean
+ * until the buffer gets unlocked).
*
* ll_rw_block sets b_end_io to simple completion handler that marks
* the buffer up-to-date (if approriate), unlocks the buffer and wakes
for (i = 0; i < nr; i++) {
struct buffer_head *bh = bhs[i];
- if (rw == SWRITE || rw == SWRITE_SYNC || rw == SWRITE_SYNC_PLUG)
- lock_buffer(bh);
- else if (!trylock_buffer(bh))
+ if (!trylock_buffer(bh))
continue;
-
- if (rw == WRITE || rw == SWRITE || rw == SWRITE_SYNC ||
- rw == SWRITE_SYNC_PLUG) {
+ if (rw == WRITE) {
if (test_clear_buffer_dirty(bh)) {
bh->b_end_io = end_buffer_write_sync;
get_bh(bh);
- if (rw == SWRITE_SYNC)
- submit_bh(WRITE_SYNC, bh);
- else
- submit_bh(WRITE, bh);
+ submit_bh(WRITE, bh);
continue;
}
} else {
}
EXPORT_SYMBOL(ll_rw_block);
+void write_dirty_buffer(struct buffer_head *bh, int rw)
+{
+ lock_buffer(bh);
+ if (!test_clear_buffer_dirty(bh)) {
+ unlock_buffer(bh);
+ return;
+ }
+ bh->b_end_io = end_buffer_write_sync;
+ get_bh(bh);
+ submit_bh(rw, bh);
+}
+EXPORT_SYMBOL(write_dirty_buffer);
+
/*
* For a data-integrity writeout, we need to wait upon any in-progress I/O
* and then start new I/O and then wait upon it. The caller must have a ref on
* the buffer_head.
*/
-int sync_dirty_buffer(struct buffer_head *bh)
+int __sync_dirty_buffer(struct buffer_head *bh, int rw)
{
int ret = 0;
if (test_clear_buffer_dirty(bh)) {
get_bh(bh);
bh->b_end_io = end_buffer_write_sync;
- ret = submit_bh(WRITE_SYNC, bh);
+ ret = submit_bh(rw, bh);
wait_on_buffer(bh);
if (buffer_eopnotsupp(bh)) {
clear_buffer_eopnotsupp(bh);
}
return ret;
}
+EXPORT_SYMBOL(__sync_dirty_buffer);
+
+int sync_dirty_buffer(struct buffer_head *bh)
+{
+ return __sync_dirty_buffer(bh, WRITE_SYNC);
+}
EXPORT_SYMBOL(sync_dirty_buffer);
/*
goto error_unsupported;
/* get the cache size and blocksize */
- ret = vfs_statfs(root, &stats);
+ ret = vfs_statfs(&path, &stats);
if (ret < 0)
goto error_unsupported;
*/
static int cachefiles_daemon_cull(struct cachefiles_cache *cache, char *args)
{
- struct fs_struct *fs;
- struct dentry *dir;
+ struct path path;
const struct cred *saved_cred;
int ret;
}
/* extract the directory dentry from the cwd */
- fs = current->fs;
- read_lock(&fs->lock);
- dir = dget(fs->pwd.dentry);
- read_unlock(&fs->lock);
+ get_fs_pwd(current->fs, &path);
- if (!S_ISDIR(dir->d_inode->i_mode))
+ if (!S_ISDIR(path.dentry->d_inode->i_mode))
goto notdir;
cachefiles_begin_secure(cache, &saved_cred);
- ret = cachefiles_cull(cache, dir, args);
+ ret = cachefiles_cull(cache, path.dentry, args);
cachefiles_end_secure(cache, saved_cred);
- dput(dir);
+ path_put(&path);
_leave(" = %d", ret);
return ret;
notdir:
- dput(dir);
+ path_put(&path);
kerror("cull command requires dirfd to be a directory");
return -ENOTDIR;
*/
static int cachefiles_daemon_inuse(struct cachefiles_cache *cache, char *args)
{
- struct fs_struct *fs;
- struct dentry *dir;
+ struct path path;
const struct cred *saved_cred;
int ret;
}
/* extract the directory dentry from the cwd */
- fs = current->fs;
- read_lock(&fs->lock);
- dir = dget(fs->pwd.dentry);
- read_unlock(&fs->lock);
+ get_fs_pwd(current->fs, &path);
- if (!S_ISDIR(dir->d_inode->i_mode))
+ if (!S_ISDIR(path.dentry->d_inode->i_mode))
goto notdir;
cachefiles_begin_secure(cache, &saved_cred);
- ret = cachefiles_check_in_use(cache, dir, args);
+ ret = cachefiles_check_in_use(cache, path.dentry, args);
cachefiles_end_secure(cache, saved_cred);
- dput(dir);
+ path_put(&path);
//_leave(" = %d", ret);
return ret;
notdir:
- dput(dir);
+ path_put(&path);
kerror("inuse command requires dirfd to be a directory");
return -ENOTDIR;
unsigned fnr, unsigned bnr)
{
struct kstatfs stats;
+ struct path path = {
+ .mnt = cache->mnt,
+ .dentry = cache->mnt->mnt_root,
+ };
int ret;
//_enter("{%llu,%llu,%llu,%llu,%llu,%llu},%u,%u",
/* find out how many pages of blockdev are available */
memset(&stats, 0, sizeof(stats));
- ret = vfs_statfs(cache->mnt->mnt_root, &stats);
+ ret = vfs_statfs(&path, &stats);
if (ret < 0) {
if (ret == -EIO)
cachefiles_io_error(cache, "statfs failed");
#define dbgprintk(FMT, ...) \
printk(KERN_DEBUG "[%-6.6s] "FMT"\n", current->comm, ##__VA_ARGS__)
-/* make sure we maintain the format strings, even when debugging is disabled */
-static inline void _dbprintk(const char *fmt, ...)
- __attribute__((format(printf, 1, 2)));
-static inline void _dbprintk(const char *fmt, ...)
-{
-}
-
#define kenter(FMT, ...) dbgprintk("==> %s("FMT")", __func__, ##__VA_ARGS__)
#define kleave(FMT, ...) dbgprintk("<== %s()"FMT"", __func__, ##__VA_ARGS__)
#define kdebug(FMT, ...) dbgprintk(FMT, ##__VA_ARGS__)
} while (0)
#else
-#define _enter(FMT, ...) _dbprintk("==> %s("FMT")", __func__, ##__VA_ARGS__)
-#define _leave(FMT, ...) _dbprintk("<== %s()"FMT"", __func__, ##__VA_ARGS__)
-#define _debug(FMT, ...) _dbprintk(FMT, ##__VA_ARGS__)
+#define _enter(FMT, ...) no_printk("==> %s("FMT")", __func__, ##__VA_ARGS__)
+#define _leave(FMT, ...) no_printk("<== %s()"FMT"", __func__, ##__VA_ARGS__)
+#define _debug(FMT, ...) no_printk(FMT, ##__VA_ARGS__)
#endif
#if 1 /* defined(__KDEBUGALL) */
obj-$(CONFIG_CEPH_FS) += ceph.o
-ceph-objs := super.o inode.o dir.o file.o addr.o ioctl.o \
+ceph-objs := super.o inode.o dir.o file.o locks.o addr.o ioctl.o \
export.o caps.o snap.o xattr.o \
messenger.o msgpool.o buffer.o pagelist.o \
mds_client.o mdsmap.o \
zero_user_segment(page, s, PAGE_CACHE_SIZE);
}
- if (add_to_page_cache_lru(page, mapping, page->index, GFP_NOFS)) {
+ if (add_to_page_cache_lru(page, mapping, page->index,
+ GFP_NOFS)) {
page_cache_release(page);
dout("readpages %p add_to_page_cache failed %p\n",
inode, page);
* page truncation thread, possibly losing some data that
* raced its way in
*/
- if ((issued & CEPH_CAP_FILE_CACHE) == 0)
+ if ((issued & (CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_LAZYIO)) == 0)
generic_error_remove_page(inode->i_mapping, page);
unlock_page(page);
dout("%p will write page %p idx %lu\n",
inode, page, page->index);
- writeback_stat = atomic_long_inc_return(&client->writeback_count);
- if (writeback_stat > CONGESTION_ON_THRESH(client->mount_args->congestion_kb)) {
- set_bdi_congested(&client->backing_dev_info, BLK_RW_ASYNC);
+ writeback_stat =
+ atomic_long_inc_return(&client->writeback_count);
+ if (writeback_stat > CONGESTION_ON_THRESH(
+ client->mount_args->congestion_kb)) {
+ set_bdi_congested(&client->backing_dev_info,
+ BLK_RW_ASYNC);
}
set_page_writeback(page);
*pagep = page;
dout("write_begin file %p inode %p page %p %d~%d\n", file,
- inode, page, (int)pos, (int)len);
+ inode, page, (int)pos, (int)len);
r = ceph_update_writeable_page(file, pos, len, page);
} while (r == -EAGAIN);
#include <linux/errno.h>
+int ceph_armor(char *dst, const char *src, const char *end);
+int ceph_unarmor(char *dst, const char *src, const char *end);
+
/*
* base64 encode/decode.
*/
-const char *pem_key = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
+static const char *pem_key =
+ "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
static int encode_bits(int c)
{
CEPH_AUTH_CEPHX
};
-int ceph_auth_init_protocol(struct ceph_auth_client *ac, int protocol)
+static int ceph_auth_init_protocol(struct ceph_auth_client *ac, int protocol)
{
switch (protocol) {
case CEPH_AUTH_NONE:
return -ERANGE;
}
-int ceph_build_auth_request(struct ceph_auth_client *ac,
- void *msg_buf, size_t msg_len)
+static int ceph_build_auth_request(struct ceph_auth_client *ac,
+ void *msg_buf, size_t msg_len)
{
struct ceph_mon_request_header *monhdr = msg_buf;
void *p = monhdr + 1;
/*
* get existing (or insert new) ticket handler
*/
-struct ceph_x_ticket_handler *get_ticket_handler(struct ceph_auth_client *ac,
- int service)
+static struct ceph_x_ticket_handler *
+get_ticket_handler(struct ceph_auth_client *ac, int service)
{
struct ceph_x_ticket_handler *th;
struct ceph_x_info *xi = ac->private;
auth->struct_v = 1;
auth->key = 0;
for (u = (u64 *)tmp_enc; u + 1 <= (u64 *)(tmp_enc + ret); u++)
- auth->key ^= *u;
+ auth->key ^= *(__le64 *)u;
dout(" server_challenge %llx client_challenge %llx key %llx\n",
xi->server_challenge, le64_to_cpu(auth->client_challenge),
le64_to_cpu(auth->key));
kfree(b);
}
-int ceph_buffer_alloc(struct ceph_buffer *b, int len, gfp_t gfp)
-{
- b->vec.iov_base = kmalloc(len, gfp | __GFP_NOWARN);
- if (b->vec.iov_base) {
- b->is_vmalloc = false;
- } else {
- b->vec.iov_base = __vmalloc(len, gfp, PAGE_KERNEL);
- b->is_vmalloc = true;
- }
- if (!b->vec.iov_base)
- return -ENOMEM;
- b->alloc_len = len;
- b->vec.iov_len = len;
- return 0;
-}
-
int ceph_decode_buffer(struct ceph_buffer **b, void **p, void *end)
{
size_t len;
return cap_str[i];
}
-/*
- * Cap reservations
- *
- * Maintain a global pool of preallocated struct ceph_caps, referenced
- * by struct ceph_caps_reservations. This ensures that we preallocate
- * memory needed to successfully process an MDS response. (If an MDS
- * sends us cap information and we fail to process it, we will have
- * problems due to the client and MDS being out of sync.)
- *
- * Reservations are 'owned' by a ceph_cap_reservation context.
- */
-static spinlock_t caps_list_lock;
-static struct list_head caps_list; /* unused (reserved or unreserved) */
-static int caps_total_count; /* total caps allocated */
-static int caps_use_count; /* in use */
-static int caps_reserve_count; /* unused, reserved */
-static int caps_avail_count; /* unused, unreserved */
-static int caps_min_count; /* keep at least this many (unreserved) */
-
-void __init ceph_caps_init(void)
+void ceph_caps_init(struct ceph_mds_client *mdsc)
{
- INIT_LIST_HEAD(&caps_list);
- spin_lock_init(&caps_list_lock);
+ INIT_LIST_HEAD(&mdsc->caps_list);
+ spin_lock_init(&mdsc->caps_list_lock);
}
-void ceph_caps_finalize(void)
+void ceph_caps_finalize(struct ceph_mds_client *mdsc)
{
struct ceph_cap *cap;
- spin_lock(&caps_list_lock);
- while (!list_empty(&caps_list)) {
- cap = list_first_entry(&caps_list, struct ceph_cap, caps_item);
+ spin_lock(&mdsc->caps_list_lock);
+ while (!list_empty(&mdsc->caps_list)) {
+ cap = list_first_entry(&mdsc->caps_list,
+ struct ceph_cap, caps_item);
list_del(&cap->caps_item);
kmem_cache_free(ceph_cap_cachep, cap);
}
- caps_total_count = 0;
- caps_avail_count = 0;
- caps_use_count = 0;
- caps_reserve_count = 0;
- caps_min_count = 0;
- spin_unlock(&caps_list_lock);
+ mdsc->caps_total_count = 0;
+ mdsc->caps_avail_count = 0;
+ mdsc->caps_use_count = 0;
+ mdsc->caps_reserve_count = 0;
+ mdsc->caps_min_count = 0;
+ spin_unlock(&mdsc->caps_list_lock);
}
-void ceph_adjust_min_caps(int delta)
+void ceph_adjust_min_caps(struct ceph_mds_client *mdsc, int delta)
{
- spin_lock(&caps_list_lock);
- caps_min_count += delta;
- BUG_ON(caps_min_count < 0);
- spin_unlock(&caps_list_lock);
+ spin_lock(&mdsc->caps_list_lock);
+ mdsc->caps_min_count += delta;
+ BUG_ON(mdsc->caps_min_count < 0);
+ spin_unlock(&mdsc->caps_list_lock);
}
-int ceph_reserve_caps(struct ceph_cap_reservation *ctx, int need)
+int ceph_reserve_caps(struct ceph_mds_client *mdsc,
+ struct ceph_cap_reservation *ctx, int need)
{
int i;
struct ceph_cap *cap;
dout("reserve caps ctx=%p need=%d\n", ctx, need);
/* first reserve any caps that are already allocated */
- spin_lock(&caps_list_lock);
- if (caps_avail_count >= need)
+ spin_lock(&mdsc->caps_list_lock);
+ if (mdsc->caps_avail_count >= need)
have = need;
else
- have = caps_avail_count;
- caps_avail_count -= have;
- caps_reserve_count += have;
- BUG_ON(caps_total_count != caps_use_count + caps_reserve_count +
- caps_avail_count);
- spin_unlock(&caps_list_lock);
+ have = mdsc->caps_avail_count;
+ mdsc->caps_avail_count -= have;
+ mdsc->caps_reserve_count += have;
+ BUG_ON(mdsc->caps_total_count != mdsc->caps_use_count +
+ mdsc->caps_reserve_count +
+ mdsc->caps_avail_count);
+ spin_unlock(&mdsc->caps_list_lock);
for (i = have; i < need; i++) {
cap = kmem_cache_alloc(ceph_cap_cachep, GFP_NOFS);
}
BUG_ON(have + alloc != need);
- spin_lock(&caps_list_lock);
- caps_total_count += alloc;
- caps_reserve_count += alloc;
- list_splice(&newcaps, &caps_list);
+ spin_lock(&mdsc->caps_list_lock);
+ mdsc->caps_total_count += alloc;
+ mdsc->caps_reserve_count += alloc;
+ list_splice(&newcaps, &mdsc->caps_list);
- BUG_ON(caps_total_count != caps_use_count + caps_reserve_count +
- caps_avail_count);
- spin_unlock(&caps_list_lock);
+ BUG_ON(mdsc->caps_total_count != mdsc->caps_use_count +
+ mdsc->caps_reserve_count +
+ mdsc->caps_avail_count);
+ spin_unlock(&mdsc->caps_list_lock);
ctx->count = need;
dout("reserve caps ctx=%p %d = %d used + %d resv + %d avail\n",
- ctx, caps_total_count, caps_use_count, caps_reserve_count,
- caps_avail_count);
+ ctx, mdsc->caps_total_count, mdsc->caps_use_count,
+ mdsc->caps_reserve_count, mdsc->caps_avail_count);
return 0;
out_alloc_count:
return ret;
}
-int ceph_unreserve_caps(struct ceph_cap_reservation *ctx)
+int ceph_unreserve_caps(struct ceph_mds_client *mdsc,
+ struct ceph_cap_reservation *ctx)
{
dout("unreserve caps ctx=%p count=%d\n", ctx, ctx->count);
if (ctx->count) {
- spin_lock(&caps_list_lock);
- BUG_ON(caps_reserve_count < ctx->count);
- caps_reserve_count -= ctx->count;
- caps_avail_count += ctx->count;
+ spin_lock(&mdsc->caps_list_lock);
+ BUG_ON(mdsc->caps_reserve_count < ctx->count);
+ mdsc->caps_reserve_count -= ctx->count;
+ mdsc->caps_avail_count += ctx->count;
ctx->count = 0;
dout("unreserve caps %d = %d used + %d resv + %d avail\n",
- caps_total_count, caps_use_count, caps_reserve_count,
- caps_avail_count);
- BUG_ON(caps_total_count != caps_use_count + caps_reserve_count +
- caps_avail_count);
- spin_unlock(&caps_list_lock);
+ mdsc->caps_total_count, mdsc->caps_use_count,
+ mdsc->caps_reserve_count, mdsc->caps_avail_count);
+ BUG_ON(mdsc->caps_total_count != mdsc->caps_use_count +
+ mdsc->caps_reserve_count +
+ mdsc->caps_avail_count);
+ spin_unlock(&mdsc->caps_list_lock);
}
return 0;
}
-static struct ceph_cap *get_cap(struct ceph_cap_reservation *ctx)
+static struct ceph_cap *get_cap(struct ceph_mds_client *mdsc,
+ struct ceph_cap_reservation *ctx)
{
struct ceph_cap *cap = NULL;
if (!ctx) {
cap = kmem_cache_alloc(ceph_cap_cachep, GFP_NOFS);
if (cap) {
- caps_use_count++;
- caps_total_count++;
+ mdsc->caps_use_count++;
+ mdsc->caps_total_count++;
}
return cap;
}
- spin_lock(&caps_list_lock);
+ spin_lock(&mdsc->caps_list_lock);
dout("get_cap ctx=%p (%d) %d = %d used + %d resv + %d avail\n",
- ctx, ctx->count, caps_total_count, caps_use_count,
- caps_reserve_count, caps_avail_count);
+ ctx, ctx->count, mdsc->caps_total_count, mdsc->caps_use_count,
+ mdsc->caps_reserve_count, mdsc->caps_avail_count);
BUG_ON(!ctx->count);
- BUG_ON(ctx->count > caps_reserve_count);
- BUG_ON(list_empty(&caps_list));
+ BUG_ON(ctx->count > mdsc->caps_reserve_count);
+ BUG_ON(list_empty(&mdsc->caps_list));
ctx->count--;
- caps_reserve_count--;
- caps_use_count++;
+ mdsc->caps_reserve_count--;
+ mdsc->caps_use_count++;
- cap = list_first_entry(&caps_list, struct ceph_cap, caps_item);
+ cap = list_first_entry(&mdsc->caps_list, struct ceph_cap, caps_item);
list_del(&cap->caps_item);
- BUG_ON(caps_total_count != caps_use_count + caps_reserve_count +
- caps_avail_count);
- spin_unlock(&caps_list_lock);
+ BUG_ON(mdsc->caps_total_count != mdsc->caps_use_count +
+ mdsc->caps_reserve_count + mdsc->caps_avail_count);
+ spin_unlock(&mdsc->caps_list_lock);
return cap;
}
-void ceph_put_cap(struct ceph_cap *cap)
+void ceph_put_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap)
{
- spin_lock(&caps_list_lock);
+ spin_lock(&mdsc->caps_list_lock);
dout("put_cap %p %d = %d used + %d resv + %d avail\n",
- cap, caps_total_count, caps_use_count,
- caps_reserve_count, caps_avail_count);
- caps_use_count--;
+ cap, mdsc->caps_total_count, mdsc->caps_use_count,
+ mdsc->caps_reserve_count, mdsc->caps_avail_count);
+ mdsc->caps_use_count--;
/*
* Keep some preallocated caps around (ceph_min_count), to
* avoid lots of free/alloc churn.
*/
- if (caps_avail_count >= caps_reserve_count + caps_min_count) {
- caps_total_count--;
+ if (mdsc->caps_avail_count >= mdsc->caps_reserve_count +
+ mdsc->caps_min_count) {
+ mdsc->caps_total_count--;
kmem_cache_free(ceph_cap_cachep, cap);
} else {
- caps_avail_count++;
- list_add(&cap->caps_item, &caps_list);
+ mdsc->caps_avail_count++;
+ list_add(&cap->caps_item, &mdsc->caps_list);
}
- BUG_ON(caps_total_count != caps_use_count + caps_reserve_count +
- caps_avail_count);
- spin_unlock(&caps_list_lock);
+ BUG_ON(mdsc->caps_total_count != mdsc->caps_use_count +
+ mdsc->caps_reserve_count + mdsc->caps_avail_count);
+ spin_unlock(&mdsc->caps_list_lock);
}
void ceph_reservation_status(struct ceph_client *client,
int *total, int *avail, int *used, int *reserved,
int *min)
{
+ struct ceph_mds_client *mdsc = &client->mdsc;
+
if (total)
- *total = caps_total_count;
+ *total = mdsc->caps_total_count;
if (avail)
- *avail = caps_avail_count;
+ *avail = mdsc->caps_avail_count;
if (used)
- *used = caps_use_count;
+ *used = mdsc->caps_use_count;
if (reserved)
- *reserved = caps_reserve_count;
+ *reserved = mdsc->caps_reserve_count;
if (min)
- *min = caps_min_count;
+ *min = mdsc->caps_min_count;
}
/*
return NULL;
}
+struct ceph_cap *ceph_get_cap_for_mds(struct ceph_inode_info *ci, int mds)
+{
+ struct ceph_cap *cap;
+
+ spin_lock(&ci->vfs_inode.i_lock);
+ cap = __get_cap_for_mds(ci, mds);
+ spin_unlock(&ci->vfs_inode.i_lock);
+ return cap;
+}
+
/*
- * Return id of any MDS with a cap, preferably FILE_WR|WRBUFFER|EXCL, else
- * -1.
+ * Return id of any MDS with a cap, preferably FILE_WR|BUFFER|EXCL, else -1.
*/
-static int __ceph_get_cap_mds(struct ceph_inode_info *ci, u32 *mseq)
+static int __ceph_get_cap_mds(struct ceph_inode_info *ci)
{
struct ceph_cap *cap;
int mds = -1;
struct rb_node *p;
- /* prefer mds with WR|WRBUFFER|EXCL caps */
+ /* prefer mds with WR|BUFFER|EXCL caps */
for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) {
cap = rb_entry(p, struct ceph_cap, ci_node);
mds = cap->mds;
- if (mseq)
- *mseq = cap->mseq;
if (cap->issued & (CEPH_CAP_FILE_WR |
CEPH_CAP_FILE_BUFFER |
CEPH_CAP_FILE_EXCL))
{
int mds;
spin_lock(&inode->i_lock);
- mds = __ceph_get_cap_mds(ceph_inode(inode), NULL);
+ mds = __ceph_get_cap_mds(ceph_inode(inode));
spin_unlock(&inode->i_lock);
return mds;
}
* Each time we receive FILE_CACHE anew, we increment
* i_rdcache_gen.
*/
- if ((issued & CEPH_CAP_FILE_CACHE) &&
- (had & CEPH_CAP_FILE_CACHE) == 0)
+ if ((issued & (CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_LAZYIO)) &&
+ (had & (CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_LAZYIO)) == 0)
ci->i_rdcache_gen++;
/*
new_cap = NULL;
} else {
spin_unlock(&inode->i_lock);
- new_cap = get_cap(caps_reservation);
+ new_cap = get_cap(mdsc, caps_reservation);
if (new_cap == NULL)
return -ENOMEM;
goto retry;
} else {
pr_err("ceph_add_cap: couldn't find snap realm %llx\n",
realmino);
+ WARN_ON(!realm);
}
}
{
int want = 0;
int mode;
- for (mode = 0; mode < 4; mode++)
+ for (mode = 0; mode < CEPH_FILE_MODE_NUM; mode++)
if (ci->i_nr_by_mode[mode])
want |= ceph_caps_for_mode(mode);
return want;
ci->i_auth_cap = NULL;
if (removed)
- ceph_put_cap(cap);
+ ceph_put_cap(mdsc, cap);
if (!__ceph_is_any_caps(ci) && ci->i_snap_realm) {
struct ceph_snap_realm *realm = ci->i_snap_realm;
*/
void __ceph_flush_snaps(struct ceph_inode_info *ci,
struct ceph_mds_session **psession)
+ __releases(ci->vfs_inode->i_lock)
+ __acquires(ci->vfs_inode->i_lock)
{
struct inode *inode = &ci->vfs_inode;
int mds;
BUG_ON(capsnap->dirty == 0);
/* pick mds, take s_mutex */
- mds = __ceph_get_cap_mds(ci, &mseq);
+ if (ci->i_auth_cap == NULL) {
+ dout("no auth cap (migrating?), doing nothing\n");
+ goto out;
+ }
+ mds = ci->i_auth_cap->session->s_mds;
+ mseq = ci->i_auth_cap->mseq;
+
if (session && session->s_mds != mds) {
dout("oops, wrong session %p mutex\n", session);
mutex_unlock(&session->s_mutex);
}
/*
* if session == NULL, we raced against a cap
- * deletion. retry, and we'll get a better
- * @mds value next time.
+ * deletion or migration. retry, and we'll
+ * get a better @mds value next time.
*/
spin_lock(&inode->i_lock);
goto retry;
list_del_init(&ci->i_snap_flush_item);
spin_unlock(&mdsc->snap_flush_lock);
+out:
if (psession)
*psession = session;
else if (session) {
*/
void ceph_check_caps(struct ceph_inode_info *ci, int flags,
struct ceph_mds_session *session)
- __releases(session->s_mutex)
{
struct ceph_client *client = ceph_inode_to_client(&ci->vfs_inode);
struct ceph_mds_client *mdsc = &client->mdsc;
ci->i_wrbuffer_ref == 0 && /* no dirty pages... */
ci->i_rdcache_gen && /* may have cached pages */
(file_wanted == 0 || /* no open files */
- (revoking & CEPH_CAP_FILE_CACHE)) && /* or revoking cache */
+ (revoking & (CEPH_CAP_FILE_CACHE|
+ CEPH_CAP_FILE_LAZYIO))) && /* or revoking cache */
!tried_invalidate) {
dout("check_caps trying to invalidate on %p\n", inode);
if (try_nonblocking_invalidate(inode) < 0) {
- if (revoking & CEPH_CAP_FILE_CACHE) {
+ if (revoking & (CEPH_CAP_FILE_CACHE|
+ CEPH_CAP_FILE_LAZYIO)) {
dout("check_caps queuing invalidate\n");
queue_invalidate = 1;
ci->i_rdcache_revoking = ci->i_rdcache_gen;
struct ceph_mds_session *session,
struct ceph_cap *cap,
struct ceph_buffer *xattr_buf)
- __releases(inode->i_lock)
- __releases(session->s_mutex)
+ __releases(inode->i_lock)
{
struct ceph_inode_info *ci = ceph_inode(inode);
int mds = session->s_mds;
* will invalidate _after_ writeback.)
*/
if (((cap->issued & ~newcaps) & CEPH_CAP_FILE_CACHE) &&
+ (newcaps & CEPH_CAP_FILE_LAZYIO) == 0 &&
!ci->i_wrbuffer_ref) {
if (try_nonblocking_invalidate(inode) == 0) {
revoked_rdcache = 1;
/* revocation, grant, or no-op? */
if (cap->issued & ~newcaps) {
- dout("revocation: %s -> %s\n", ceph_cap_string(cap->issued),
- ceph_cap_string(newcaps));
- if ((used & ~newcaps) & CEPH_CAP_FILE_BUFFER)
- writeback = 1; /* will delay ack */
- else if (dirty & ~newcaps)
- check_caps = 1; /* initiate writeback in check_caps */
- else if (((used & ~newcaps) & CEPH_CAP_FILE_CACHE) == 0 ||
- revoked_rdcache)
- check_caps = 2; /* send revoke ack in check_caps */
+ int revoking = cap->issued & ~newcaps;
+
+ dout("revocation: %s -> %s (revoking %s)\n",
+ ceph_cap_string(cap->issued),
+ ceph_cap_string(newcaps),
+ ceph_cap_string(revoking));
+ if (revoking & used & CEPH_CAP_FILE_BUFFER)
+ writeback = 1; /* initiate writeback; will delay ack */
+ else if (revoking == CEPH_CAP_FILE_CACHE &&
+ (newcaps & CEPH_CAP_FILE_LAZYIO) == 0 &&
+ queue_invalidate)
+ ; /* do nothing yet, invalidation will be queued */
+ else if (cap == ci->i_auth_cap)
+ check_caps = 1; /* check auth cap only */
+ else
+ check_caps = 2; /* check all caps */
cap->issued = newcaps;
cap->implemented |= newcaps;
} else if (cap->issued == newcaps) {
* caller holds s_mutex
*/
static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex,
- struct ceph_mds_session *session)
+ struct ceph_mds_session *session,
+ int *open_target_sessions)
{
struct ceph_inode_info *ci = ceph_inode(inode);
int mds = session->s_mds;
ci->i_cap_exporting_mds = mds;
ci->i_cap_exporting_mseq = mseq;
ci->i_cap_exporting_issued = cap->issued;
+
+ /*
+ * make sure we have open sessions with all possible
+ * export targets, so that we get the matching IMPORT
+ */
+ *open_target_sessions = 1;
}
__ceph_remove_cap(cap);
}
u64 size, max_size;
u64 tid;
void *snaptrace;
+ size_t snaptrace_len;
+ void *flock;
+ u32 flock_len;
+ int open_target_sessions = 0;
dout("handle_caps from mds%d\n", mds);
if (msg->front.iov_len < sizeof(*h))
goto bad;
h = msg->front.iov_base;
- snaptrace = h + 1;
op = le32_to_cpu(h->op);
vino.ino = le64_to_cpu(h->ino);
vino.snap = CEPH_NOSNAP;
size = le64_to_cpu(h->size);
max_size = le64_to_cpu(h->max_size);
+ snaptrace = h + 1;
+ snaptrace_len = le32_to_cpu(h->snap_trace_len);
+
+ if (le16_to_cpu(msg->hdr.version) >= 2) {
+ void *p, *end;
+
+ p = snaptrace + snaptrace_len;
+ end = msg->front.iov_base + msg->front.iov_len;
+ ceph_decode_32_safe(&p, end, flock_len, bad);
+ flock = p;
+ } else {
+ flock = NULL;
+ flock_len = 0;
+ }
+
mutex_lock(&session->s_mutex);
session->s_seq++;
dout(" mds%d seq %lld cap seq %u\n", session->s_mds, session->s_seq,
* along for the mds (who clearly thinks we still have this
* cap).
*/
- ceph_add_cap_releases(mdsc, session, -1);
+ ceph_add_cap_releases(mdsc, session);
ceph_send_cap_releases(mdsc, session);
goto done;
}
goto done;
case CEPH_CAP_OP_EXPORT:
- handle_cap_export(inode, h, session);
+ handle_cap_export(inode, h, session, &open_target_sessions);
goto done;
case CEPH_CAP_OP_IMPORT:
handle_cap_import(mdsc, inode, h, session,
- snaptrace, le32_to_cpu(h->snap_trace_len));
+ snaptrace, snaptrace_len);
ceph_check_caps(ceph_inode(inode), CHECK_CAPS_NODELAY,
session);
goto done_unlocked;
done_unlocked:
if (inode)
iput(inode);
+ if (open_target_sessions)
+ ceph_mdsc_open_export_target_sessions(mdsc, session);
return;
bad:
-#ifndef _FS_CEPH_FRAG_H
-#define _FS_CEPH_FRAG_H
+#ifndef FS_CEPH_FRAG_H
+#define FS_CEPH_FRAG_H
/*
* "Frags" are a way to describe a subset of a 32-bit number space,
int ceph_flags_to_mode(int flags)
{
+ int mode;
+
#ifdef O_DIRECTORY /* fixme */
if ((flags & O_DIRECTORY) == O_DIRECTORY)
return CEPH_FILE_MODE_PIN;
#endif
+ if ((flags & O_APPEND) == O_APPEND)
+ flags |= O_WRONLY;
+
+ if ((flags & O_ACCMODE) == O_RDWR)
+ mode = CEPH_FILE_MODE_RDWR;
+ else if ((flags & O_ACCMODE) == O_WRONLY)
+ mode = CEPH_FILE_MODE_WR;
+ else
+ mode = CEPH_FILE_MODE_RD;
+
#ifdef O_LAZY
if (flags & O_LAZY)
- return CEPH_FILE_MODE_LAZY;
+ mode |= CEPH_FILE_MODE_LAZY;
#endif
- if ((flags & O_APPEND) == O_APPEND)
- flags |= O_WRONLY;
- flags &= O_ACCMODE;
- if ((flags & O_RDWR) == O_RDWR)
- return CEPH_FILE_MODE_RDWR;
- if ((flags & O_WRONLY) == O_WRONLY)
- return CEPH_FILE_MODE_WR;
- return CEPH_FILE_MODE_RD;
+ return mode;
}
int ceph_caps_for_mode(int mode)
{
- switch (mode) {
- case CEPH_FILE_MODE_PIN:
- return CEPH_CAP_PIN;
- case CEPH_FILE_MODE_RD:
- return CEPH_CAP_PIN | CEPH_CAP_FILE_SHARED |
+ int caps = CEPH_CAP_PIN;
+
+ if (mode & CEPH_FILE_MODE_RD)
+ caps |= CEPH_CAP_FILE_SHARED |
CEPH_CAP_FILE_RD | CEPH_CAP_FILE_CACHE;
- case CEPH_FILE_MODE_RDWR:
- return CEPH_CAP_PIN | CEPH_CAP_FILE_SHARED |
- CEPH_CAP_FILE_EXCL |
- CEPH_CAP_FILE_RD | CEPH_CAP_FILE_CACHE |
- CEPH_CAP_FILE_WR | CEPH_CAP_FILE_BUFFER |
- CEPH_CAP_AUTH_SHARED | CEPH_CAP_AUTH_EXCL |
- CEPH_CAP_XATTR_SHARED | CEPH_CAP_XATTR_EXCL;
- case CEPH_FILE_MODE_WR:
- return CEPH_CAP_PIN | CEPH_CAP_FILE_SHARED |
- CEPH_CAP_FILE_EXCL |
+ if (mode & CEPH_FILE_MODE_WR)
+ caps |= CEPH_CAP_FILE_EXCL |
CEPH_CAP_FILE_WR | CEPH_CAP_FILE_BUFFER |
CEPH_CAP_AUTH_SHARED | CEPH_CAP_AUTH_EXCL |
CEPH_CAP_XATTR_SHARED | CEPH_CAP_XATTR_EXCL;
- }
- return 0;
+ if (mode & CEPH_FILE_MODE_LAZY)
+ caps |= CEPH_CAP_FILE_LAZYIO;
+
+ return caps;
}
* LGPL2
*/
-#ifndef _FS_CEPH_CEPH_FS_H
-#define _FS_CEPH_CEPH_FS_H
+#ifndef CEPH_FS_H
+#define CEPH_FS_H
#include "msgr.h"
#include "rados.h"
-/*
- * Ceph release version
- */
-#define CEPH_VERSION_MAJOR 0
-#define CEPH_VERSION_MINOR 20
-#define CEPH_VERSION_PATCH 0
-
-#define _CEPH_STRINGIFY(x) #x
-#define CEPH_STRINGIFY(x) _CEPH_STRINGIFY(x)
-#define CEPH_MAKE_VERSION(x, y, z) CEPH_STRINGIFY(x) "." CEPH_STRINGIFY(y) \
- "." CEPH_STRINGIFY(z)
-#define CEPH_VERSION CEPH_MAKE_VERSION(CEPH_VERSION_MAJOR, \
- CEPH_VERSION_MINOR, CEPH_VERSION_PATCH)
-
/*
* subprotocol versions. when specific messages types or high-level
* protocols change, bump the affected components. we keep rev
/*
* feature bits
*/
-#define CEPH_FEATURE_UID 1
-#define CEPH_FEATURE_NOSRCADDR 2
-#define CEPH_FEATURE_FLOCK 4
-
-#define CEPH_FEATURE_SUPPORTED_MON CEPH_FEATURE_UID|CEPH_FEATURE_NOSRCADDR
-#define CEPH_FEATURE_REQUIRED_MON CEPH_FEATURE_UID
-#define CEPH_FEATURE_SUPPORTED_MDS CEPH_FEATURE_UID|CEPH_FEATURE_NOSRCADDR|CEPH_FEATURE_FLOCK
-#define CEPH_FEATURE_REQUIRED_MDS CEPH_FEATURE_UID
-#define CEPH_FEATURE_SUPPORTED_OSD CEPH_FEATURE_UID|CEPH_FEATURE_NOSRCADDR
-#define CEPH_FEATURE_REQUIRED_OSD CEPH_FEATURE_UID
-#define CEPH_FEATURE_SUPPORTED_CLIENT CEPH_FEATURE_NOSRCADDR
-#define CEPH_FEATURE_REQUIRED_CLIENT CEPH_FEATURE_NOSRCADDR
+#define CEPH_FEATURE_UID (1<<0)
+#define CEPH_FEATURE_NOSRCADDR (1<<1)
+#define CEPH_FEATURE_MONCLOCKCHECK (1<<2)
+#define CEPH_FEATURE_FLOCK (1<<3)
/*
#define CEPH_CRYPTO_NONE 0x0
#define CEPH_CRYPTO_AES 0x1
+#define CEPH_AES_IV "cephsageyudagreg"
+
/* security/authentication protocols */
#define CEPH_AUTH_UNKNOWN 0x0
#define CEPH_AUTH_NONE 0x1
#define CEPH_LOCK_IDFT 512 /* dir frag tree */
#define CEPH_LOCK_INEST 1024 /* mds internal */
#define CEPH_LOCK_IXATTR 2048
+#define CEPH_LOCK_IFLOCK 4096 /* advisory file locks */
#define CEPH_LOCK_INO 8192 /* immutable inode bits; not a lock */
/* client_session ops */
CEPH_MDS_OP_RMXATTR = 0x01106,
CEPH_MDS_OP_SETLAYOUT = 0x01107,
CEPH_MDS_OP_SETATTR = 0x01108,
+ CEPH_MDS_OP_SETFILELOCK= 0x01109,
+ CEPH_MDS_OP_GETFILELOCK= 0x00110,
CEPH_MDS_OP_MKNOD = 0x01201,
CEPH_MDS_OP_LINK = 0x01202,
struct {
struct ceph_file_layout layout;
} __attribute__ ((packed)) setlayout;
+ struct {
+ __u8 rule; /* currently fcntl or flock */
+ __u8 type; /* shared, exclusive, remove*/
+ __le64 pid; /* process id requesting the lock */
+ __le64 pid_namespace;
+ __le64 start; /* initial location to lock */
+ __le64 length; /* num bytes to lock from start */
+ __u8 wait; /* will caller wait for lock to become available? */
+ } __attribute__ ((packed)) filelock_change;
} __attribute__ ((packed));
#define CEPH_MDS_FLAG_REPLAY 1 /* this is a replayed op */
__le32 dist[];
} __attribute__ ((packed));
+#define CEPH_LOCK_FCNTL 1
+#define CEPH_LOCK_FLOCK 2
+
+#define CEPH_LOCK_SHARED 1
+#define CEPH_LOCK_EXCL 2
+#define CEPH_LOCK_UNLOCK 4
+
+struct ceph_filelock {
+ __le64 start;/* file offset to start lock at */
+ __le64 length; /* num bytes to lock; 0 for all following start */
+ __le64 client; /* which client holds the lock */
+ __le64 pid; /* process id holding the lock on the client */
+ __le64 pid_namespace;
+ __u8 type; /* shared lock, exclusive lock, or unlock */
+} __attribute__ ((packed));
+
+
/* file access modes */
#define CEPH_FILE_MODE_PIN 0
#define CEPH_FILE_MODE_RD 1
#define CEPH_CAP_SAUTH 2
#define CEPH_CAP_SLINK 4
#define CEPH_CAP_SXATTR 6
-#define CEPH_CAP_SFILE 8 /* goes at the end (uses >2 cap bits) */
+#define CEPH_CAP_SFILE 8
+#define CEPH_CAP_SFLOCK 20
-#define CEPH_CAP_BITS 16
+#define CEPH_CAP_BITS 22
/* composed values */
#define CEPH_CAP_AUTH_SHARED (CEPH_CAP_GSHARED << CEPH_CAP_SAUTH)
#define CEPH_CAP_FILE_BUFFER (CEPH_CAP_GBUFFER << CEPH_CAP_SFILE)
#define CEPH_CAP_FILE_WREXTEND (CEPH_CAP_GWREXTEND << CEPH_CAP_SFILE)
#define CEPH_CAP_FILE_LAZYIO (CEPH_CAP_GLAZYIO << CEPH_CAP_SFILE)
+#define CEPH_CAP_FLOCK_SHARED (CEPH_CAP_GSHARED << CEPH_CAP_SFLOCK)
+#define CEPH_CAP_FLOCK_EXCL (CEPH_CAP_GEXCL << CEPH_CAP_SFLOCK)
+
/* cap masks (for getattr) */
#define CEPH_STAT_CAP_INODE CEPH_CAP_PIN
CEPH_CAP_FILE_EXCL)
#define CEPH_CAP_ANY_WR (CEPH_CAP_ANY_EXCL | CEPH_CAP_ANY_FILE_WR)
#define CEPH_CAP_ANY (CEPH_CAP_ANY_RD | CEPH_CAP_ANY_EXCL | \
- CEPH_CAP_ANY_FILE_WR | CEPH_CAP_PIN)
+ CEPH_CAP_ANY_FILE_WR | CEPH_CAP_FILE_LAZYIO | \
+ CEPH_CAP_PIN)
#define CEPH_CAP_LOCKS (CEPH_LOCK_IFILE | CEPH_LOCK_IAUTH | CEPH_LOCK_ILINK | \
CEPH_LOCK_IXATTR)
/* client reconnect */
struct ceph_mds_cap_reconnect {
+ __le64 cap_id;
+ __le32 wanted;
+ __le32 issued;
+ __le64 snaprealm;
+ __le64 pathbase; /* base ino for our path to this ino */
+ __le32 flock_len; /* size of flock state blob, if any */
+} __attribute__ ((packed));
+/* followed by flock blob */
+
+struct ceph_mds_cap_reconnect_v1 {
__le64 cap_id;
__le32 wanted;
__le32 issued;
__le64 snaprealm;
__le64 pathbase; /* base ino for our path to this ino */
} __attribute__ ((packed));
-/* followed by encoded string */
struct ceph_mds_snaprealm_reconnect {
__le64 ino; /* snap realm base */
-#ifndef _FS_CEPH_HASH_H
-#define _FS_CEPH_HASH_H
+#ifndef FS_CEPH_HASH_H
+#define FS_CEPH_HASH_H
#define CEPH_STR_HASH_LINUX 0x1 /* linux dcache hash */
#define CEPH_STR_HASH_RJENKINS 0x2 /* robert jenkins' */
case CEPH_OSD_OP_TRUNCATE: return "truncate";
case CEPH_OSD_OP_ZERO: return "zero";
case CEPH_OSD_OP_WRITEFULL: return "writefull";
+ case CEPH_OSD_OP_ROLLBACK: return "rollback";
case CEPH_OSD_OP_APPEND: return "append";
case CEPH_OSD_OP_STARTSYNC: return "startsync";
case CEPH_MDS_OP_LSSNAP: return "lssnap";
case CEPH_MDS_OP_MKSNAP: return "mksnap";
case CEPH_MDS_OP_RMSNAP: return "rmsnap";
+ case CEPH_MDS_OP_SETFILELOCK: return "setfilelock";
+ case CEPH_MDS_OP_GETFILELOCK: return "getfilelock";
}
return "???";
}
-#ifndef _CRUSH_CRUSH_H
-#define _CRUSH_CRUSH_H
+#ifndef CEPH_CRUSH_CRUSH_H
+#define CEPH_CRUSH_CRUSH_H
#include <linux/types.h>
-#ifndef _CRUSH_HASH_H
-#define _CRUSH_HASH_H
+#ifndef CEPH_CRUSH_HASH_H
+#define CEPH_CRUSH_HASH_H
#define CRUSH_HASH_RJENKINS1 0
-#ifndef _CRUSH_MAPPER_H
-#define _CRUSH_MAPPER_H
+#ifndef CEPH_CRUSH_MAPPER_H
+#define CEPH_CRUSH_MAPPER_H
/*
* CRUSH functions for find rules and then mapping an input to an
return crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
}
-const u8 *aes_iv = "cephsageyudagreg";
+static const u8 *aes_iv = (u8 *)CEPH_AES_IV;
-int ceph_aes_encrypt(const void *key, int key_len, void *dst, size_t *dst_len,
- const void *src, size_t src_len)
+static int ceph_aes_encrypt(const void *key, int key_len,
+ void *dst, size_t *dst_len,
+ const void *src, size_t src_len)
{
struct scatterlist sg_in[2], sg_out[1];
struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
return 0;
}
-int ceph_aes_encrypt2(const void *key, int key_len, void *dst, size_t *dst_len,
- const void *src1, size_t src1_len,
- const void *src2, size_t src2_len)
+static int ceph_aes_encrypt2(const void *key, int key_len, void *dst,
+ size_t *dst_len,
+ const void *src1, size_t src1_len,
+ const void *src2, size_t src2_len)
{
struct scatterlist sg_in[3], sg_out[1];
struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
return 0;
}
-int ceph_aes_decrypt(const void *key, int key_len, void *dst, size_t *dst_len,
- const void *src, size_t src_len)
+static int ceph_aes_decrypt(const void *key, int key_len,
+ void *dst, size_t *dst_len,
+ const void *src, size_t src_len)
{
struct scatterlist sg_in[1], sg_out[2];
struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
return 0;
}
-int ceph_aes_decrypt2(const void *key, int key_len,
- void *dst1, size_t *dst1_len,
- void *dst2, size_t *dst2_len,
- const void *src, size_t src_len)
+static int ceph_aes_decrypt2(const void *key, int key_len,
+ void *dst1, size_t *dst1_len,
+ void *dst2, size_t *dst2_len,
+ const void *src, size_t src_len)
{
struct scatterlist sg_in[1], sg_out[3];
struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
const void *src2, size_t src2_len);
/* armor.c */
-extern int ceph_armor(char *dst, const void *src, const void *end);
-extern int ceph_unarmor(void *dst, const char *src, const char *end);
+extern int ceph_armor(char *dst, const char *src, const char *end);
+extern int ceph_unarmor(char *dst, const char *src, const char *end);
#endif
return 0;
}
-#define DEFINE_SHOW_FUNC(name) \
+#define DEFINE_SHOW_FUNC(name) \
static int name##_open(struct inode *inode, struct file *file) \
{ \
struct seq_file *sf; \
int ret = 0;
char name[80];
- snprintf(name, sizeof(name), FSID_FORMAT ".client%lld",
- PR_FSID(&client->fsid), client->monc.auth->global_id);
+ snprintf(name, sizeof(name), "%pU.client%lld", &client->fsid,
+ client->monc.auth->global_id);
client->debugfs_dir = debugfs_create_dir(name, ceph_debugfs_dir);
if (!client->debugfs_dir)
if (!client->debugfs_caps)
goto out;
- client->debugfs_congestion_kb = debugfs_create_file("writeback_congestion_kb",
- 0600,
- client->debugfs_dir,
- client,
- &congestion_kb_fops);
+ client->debugfs_congestion_kb =
+ debugfs_create_file("writeback_congestion_kb",
+ 0600,
+ client->debugfs_dir,
+ client,
+ &congestion_kb_fops);
if (!client->debugfs_congestion_kb)
goto out;
debugfs_remove(client->debugfs_dir);
}
-#else // CONFIG_DEBUG_FS
+#else /* CONFIG_DEBUG_FS */
int __init ceph_debugfs_init(void)
{
{
}
-#endif // CONFIG_DEBUG_FS
+#endif /* CONFIG_DEBUG_FS */
*/
static inline void ceph_encode_addr(struct ceph_entity_addr *a)
{
- a->in_addr.ss_family = htons(a->in_addr.ss_family);
+ __be16 ss_family = htons(a->in_addr.ss_family);
+ a->in_addr.ss_family = *(__u16 *)&ss_family;
}
static inline void ceph_decode_addr(struct ceph_entity_addr *a)
{
- a->in_addr.ss_family = ntohs(a->in_addr.ss_family);
+ __be16 ss_family = *(__be16 *)&a->in_addr.ss_family;
+ a->in_addr.ss_family = ntohs(ss_family);
WARN_ON(a->in_addr.ss_family == 512);
}
const struct inode_operations ceph_dir_iops;
const struct file_operations ceph_dir_fops;
-struct dentry_operations ceph_dentry_ops;
+const struct dentry_operations ceph_dentry_ops;
/*
* Initialize ceph dentry state.
*/
static int __dcache_readdir(struct file *filp,
void *dirent, filldir_t filldir)
+ __releases(inode->i_lock)
+ __acquires(inode->i_lock)
{
struct inode *inode = filp->f_dentry->d_inode;
struct ceph_file_info *fi = filp->private_data;
.create = ceph_create,
};
-struct dentry_operations ceph_dentry_ops = {
+const struct dentry_operations ceph_dentry_ops = {
.d_revalidate = ceph_d_revalidate,
.d_release = ceph_dentry_release,
};
-struct dentry_operations ceph_snapdir_dentry_ops = {
+const struct dentry_operations ceph_snapdir_dentry_ops = {
.d_revalidate = ceph_snapdir_d_revalidate,
.d_release = ceph_dentry_release,
};
-struct dentry_operations ceph_snap_dentry_ops = {
+const struct dentry_operations ceph_snap_dentry_ops = {
.d_release = ceph_dentry_release,
};
/*
* allocate a vector new pages
*/
-struct page **ceph_alloc_page_vector(int num_pages, gfp_t flags)
+static struct page **ceph_alloc_page_vector(int num_pages, gfp_t flags)
{
struct page **pages;
int i;
* throw out any page cache pages in this range. this
* may block.
*/
- truncate_inode_pages_range(inode->i_mapping, pos,
+ truncate_inode_pages_range(inode->i_mapping, pos,
(pos+len) | (PAGE_CACHE_SIZE-1));
} else {
pages = ceph_alloc_page_vector(num_pages, GFP_NOFS);
unsigned long nr_segs, loff_t pos)
{
struct file *filp = iocb->ki_filp;
+ struct ceph_file_info *fi = filp->private_data;
loff_t *ppos = &iocb->ki_pos;
size_t len = iov->iov_len;
struct inode *inode = filp->f_dentry->d_inode;
struct ceph_inode_info *ci = ceph_inode(inode);
- void *base = iov->iov_base;
+ void __user *base = iov->iov_base;
ssize_t ret;
- int got = 0;
+ int want, got = 0;
int checkeof = 0, read = 0;
dout("aio_read %p %llx.%llx %llu~%u trying to get caps on %p\n",
inode, ceph_vinop(inode), pos, (unsigned)len, inode);
again:
__ceph_do_pending_vmtruncate(inode);
- ret = ceph_get_caps(ci, CEPH_CAP_FILE_RD, CEPH_CAP_FILE_CACHE,
- &got, -1);
+ if (fi->fmode & CEPH_FILE_MODE_LAZY)
+ want = CEPH_CAP_FILE_CACHE | CEPH_CAP_FILE_LAZYIO;
+ else
+ want = CEPH_CAP_FILE_CACHE;
+ ret = ceph_get_caps(ci, CEPH_CAP_FILE_RD, want, &got, -1);
if (ret < 0)
goto out;
dout("aio_read %p %llx.%llx %llu~%u got cap refs on %s\n",
inode, ceph_vinop(inode), pos, (unsigned)len,
ceph_cap_string(got));
- if ((got & CEPH_CAP_FILE_CACHE) == 0 ||
+ if ((got & (CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_LAZYIO)) == 0 ||
(iocb->ki_filp->f_flags & O_DIRECT) ||
(inode->i_sb->s_flags & MS_SYNCHRONOUS))
/* hmm, this isn't really async... */
unsigned long nr_segs, loff_t pos)
{
struct file *file = iocb->ki_filp;
+ struct ceph_file_info *fi = file->private_data;
struct inode *inode = file->f_dentry->d_inode;
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_osd_client *osdc = &ceph_sb_to_client(inode->i_sb)->osdc;
loff_t endoff = pos + iov->iov_len;
- int got = 0;
+ int want, got = 0;
int ret, err;
if (ceph_snap(inode) != CEPH_NOSNAP)
dout("aio_write %p %llx.%llx %llu~%u getting caps. i_size %llu\n",
inode, ceph_vinop(inode), pos, (unsigned)iov->iov_len,
inode->i_size);
- ret = ceph_get_caps(ci, CEPH_CAP_FILE_WR, CEPH_CAP_FILE_BUFFER,
- &got, endoff);
+ if (fi->fmode & CEPH_FILE_MODE_LAZY)
+ want = CEPH_CAP_FILE_BUFFER | CEPH_CAP_FILE_LAZYIO;
+ else
+ want = CEPH_CAP_FILE_BUFFER;
+ ret = ceph_get_caps(ci, CEPH_CAP_FILE_WR, want, &got, endoff);
if (ret < 0)
goto out;
inode, ceph_vinop(inode), pos, (unsigned)iov->iov_len,
ceph_cap_string(got));
- if ((got & CEPH_CAP_FILE_BUFFER) == 0 ||
+ if ((got & (CEPH_CAP_FILE_BUFFER|CEPH_CAP_FILE_LAZYIO)) == 0 ||
(iocb->ki_filp->f_flags & O_DIRECT) ||
(inode->i_sb->s_flags & MS_SYNCHRONOUS)) {
ret = ceph_sync_write(file, iov->iov_base, iov->iov_len,
.aio_write = ceph_aio_write,
.mmap = ceph_mmap,
.fsync = ceph_fsync,
+ .lock = ceph_lock,
+ .flock = ceph_flock,
.splice_read = generic_file_splice_read,
.splice_write = generic_file_splice_write,
.unlocked_ioctl = ceph_ioctl,
* the file is either opened or mmaped
*/
if ((issued & (CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_RD|
- CEPH_CAP_FILE_WR|CEPH_CAP_FILE_BUFFER|
- CEPH_CAP_FILE_EXCL)) ||
+ CEPH_CAP_FILE_WR|CEPH_CAP_FILE_BUFFER|
+ CEPH_CAP_FILE_EXCL|
+ CEPH_CAP_FILE_LAZYIO)) ||
mapping_mapped(inode->i_mapping) ||
__ceph_caps_file_wanted(ci)) {
ci->i_truncate_pending++;
return 0;
}
+static long ceph_ioctl_lazyio(struct file *file)
+{
+ struct ceph_file_info *fi = file->private_data;
+ struct inode *inode = file->f_dentry->d_inode;
+ struct ceph_inode_info *ci = ceph_inode(inode);
+
+ if ((fi->fmode & CEPH_FILE_MODE_LAZY) == 0) {
+ spin_lock(&inode->i_lock);
+ ci->i_nr_by_mode[fi->fmode]--;
+ fi->fmode |= CEPH_FILE_MODE_LAZY;
+ ci->i_nr_by_mode[fi->fmode]++;
+ spin_unlock(&inode->i_lock);
+ dout("ioctl_layzio: file %p marked lazy\n", file);
+
+ ceph_check_caps(ci, 0, NULL);
+ } else {
+ dout("ioctl_layzio: file %p already lazy\n", file);
+ }
+ return 0;
+}
+
long ceph_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
dout("ioctl file %p cmd %u arg %lu\n", file, cmd, arg);
case CEPH_IOC_GET_DATALOC:
return ceph_ioctl_get_dataloc(file, (void __user *)arg);
+
+ case CEPH_IOC_LAZYIO:
+ return ceph_ioctl_lazyio(file);
}
return -ENOTTY;
}
#define CEPH_IOC_GET_DATALOC _IOWR(CEPH_IOCTL_MAGIC, 3, \
struct ceph_ioctl_dataloc)
+#define CEPH_IOC_LAZYIO _IO(CEPH_IOCTL_MAGIC, 4)
+
#endif
--- /dev/null
+#include "ceph_debug.h"
+
+#include <linux/file.h>
+#include <linux/namei.h>
+
+#include "super.h"
+#include "mds_client.h"
+#include "pagelist.h"
+
+/**
+ * Implement fcntl and flock locking functions.
+ */
+static int ceph_lock_message(u8 lock_type, u16 operation, struct file *file,
+ u64 pid, u64 pid_ns,
+ int cmd, u64 start, u64 length, u8 wait)
+{
+ struct inode *inode = file->f_dentry->d_inode;
+ struct ceph_mds_client *mdsc =
+ &ceph_sb_to_client(inode->i_sb)->mdsc;
+ struct ceph_mds_request *req;
+ int err;
+
+ req = ceph_mdsc_create_request(mdsc, operation, USE_AUTH_MDS);
+ if (IS_ERR(req))
+ return PTR_ERR(req);
+ req->r_inode = igrab(inode);
+
+ dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
+ "length: %llu, wait: %d, type`: %d", (int)lock_type,
+ (int)operation, pid, start, length, wait, cmd);
+
+ req->r_args.filelock_change.rule = lock_type;
+ req->r_args.filelock_change.type = cmd;
+ req->r_args.filelock_change.pid = cpu_to_le64(pid);
+ /* This should be adjusted, but I'm not sure if
+ namespaces actually get id numbers*/
+ req->r_args.filelock_change.pid_namespace =
+ cpu_to_le64((u64)pid_ns);
+ req->r_args.filelock_change.start = cpu_to_le64(start);
+ req->r_args.filelock_change.length = cpu_to_le64(length);
+ req->r_args.filelock_change.wait = wait;
+
+ err = ceph_mdsc_do_request(mdsc, inode, req);
+ ceph_mdsc_put_request(req);
+ dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
+ "length: %llu, wait: %d, type`: %d err code %d", (int)lock_type,
+ (int)operation, pid, start, length, wait, cmd, err);
+ return err;
+}
+
+/**
+ * Attempt to set an fcntl lock.
+ * For now, this just goes away to the server. Later it may be more awesome.
+ */
+int ceph_lock(struct file *file, int cmd, struct file_lock *fl)
+{
+ u64 length;
+ u8 lock_cmd;
+ int err;
+ u8 wait = 0;
+ u16 op = CEPH_MDS_OP_SETFILELOCK;
+
+ fl->fl_nspid = get_pid(task_tgid(current));
+ dout("ceph_lock, fl_pid:%d", fl->fl_pid);
+
+ /* set wait bit as appropriate, then make command as Ceph expects it*/
+ if (F_SETLKW == cmd)
+ wait = 1;
+ if (F_GETLK == cmd)
+ op = CEPH_MDS_OP_GETFILELOCK;
+
+ if (F_RDLCK == fl->fl_type)
+ lock_cmd = CEPH_LOCK_SHARED;
+ else if (F_WRLCK == fl->fl_type)
+ lock_cmd = CEPH_LOCK_EXCL;
+ else
+ lock_cmd = CEPH_LOCK_UNLOCK;
+
+ if (LLONG_MAX == fl->fl_end)
+ length = 0;
+ else
+ length = fl->fl_end - fl->fl_start + 1;
+
+ err = ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
+ (u64)fl->fl_pid, (u64)fl->fl_nspid,
+ lock_cmd, fl->fl_start,
+ length, wait);
+ if (!err) {
+ dout("mds locked, locking locally");
+ err = posix_lock_file(file, fl, NULL);
+ if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
+ /* undo! This should only happen if the kernel detects
+ * local deadlock. */
+ ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
+ (u64)fl->fl_pid, (u64)fl->fl_nspid,
+ CEPH_LOCK_UNLOCK, fl->fl_start,
+ length, 0);
+ dout("got %d on posix_lock_file, undid lock", err);
+ }
+ } else {
+ dout("mds returned error code %d", err);
+ }
+ return err;
+}
+
+int ceph_flock(struct file *file, int cmd, struct file_lock *fl)
+{
+ u64 length;
+ u8 lock_cmd;
+ int err;
+ u8 wait = 1;
+
+ fl->fl_nspid = get_pid(task_tgid(current));
+ dout("ceph_flock, fl_pid:%d", fl->fl_pid);
+
+ /* set wait bit, then clear it out of cmd*/
+ if (cmd & LOCK_NB)
+ wait = 0;
+ cmd = cmd & (LOCK_SH | LOCK_EX | LOCK_UN);
+ /* set command sequence that Ceph wants to see:
+ shared lock, exclusive lock, or unlock */
+ if (LOCK_SH == cmd)
+ lock_cmd = CEPH_LOCK_SHARED;
+ else if (LOCK_EX == cmd)
+ lock_cmd = CEPH_LOCK_EXCL;
+ else
+ lock_cmd = CEPH_LOCK_UNLOCK;
+ /* mds requires start and length rather than start and end */
+ if (LLONG_MAX == fl->fl_end)
+ length = 0;
+ else
+ length = fl->fl_end - fl->fl_start + 1;
+
+ err = ceph_lock_message(CEPH_LOCK_FLOCK, CEPH_MDS_OP_SETFILELOCK,
+ file, (u64)fl->fl_pid, (u64)fl->fl_nspid,
+ lock_cmd, fl->fl_start,
+ length, wait);
+ if (!err) {
+ err = flock_lock_file_wait(file, fl);
+ if (err) {
+ ceph_lock_message(CEPH_LOCK_FLOCK,
+ CEPH_MDS_OP_SETFILELOCK,
+ file, (u64)fl->fl_pid,
+ (u64)fl->fl_nspid,
+ CEPH_LOCK_UNLOCK, fl->fl_start,
+ length, 0);
+ dout("got %d on flock_lock_file_wait, undid lock", err);
+ }
+ } else {
+ dout("mds error code %d", err);
+ }
+ return err;
+}
+
+/**
+ * Must be called with BKL already held. Fills in the passed
+ * counter variables, so you can prepare pagelist metadata before calling
+ * ceph_encode_locks.
+ */
+void ceph_count_locks(struct inode *inode, int *fcntl_count, int *flock_count)
+{
+ struct file_lock *lock;
+
+ *fcntl_count = 0;
+ *flock_count = 0;
+
+ for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) {
+ if (lock->fl_flags & FL_POSIX)
+ ++(*fcntl_count);
+ else if (lock->fl_flags & FL_FLOCK)
+ ++(*flock_count);
+ }
+ dout("counted %d flock locks and %d fcntl locks",
+ *flock_count, *fcntl_count);
+}
+
+/**
+ * Encode the flock and fcntl locks for the given inode into the pagelist.
+ * Format is: #fcntl locks, sequential fcntl locks, #flock locks,
+ * sequential flock locks.
+ * Must be called with BLK already held, and the lock numbers should have
+ * been gathered under the same lock holding window.
+ */
+int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist,
+ int num_fcntl_locks, int num_flock_locks)
+{
+ struct file_lock *lock;
+ struct ceph_filelock cephlock;
+ int err = 0;
+
+ dout("encoding %d flock and %d fcntl locks", num_flock_locks,
+ num_fcntl_locks);
+ err = ceph_pagelist_append(pagelist, &num_fcntl_locks, sizeof(u32));
+ if (err)
+ goto fail;
+ for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) {
+ if (lock->fl_flags & FL_POSIX) {
+ err = lock_to_ceph_filelock(lock, &cephlock);
+ if (err)
+ goto fail;
+ err = ceph_pagelist_append(pagelist, &cephlock,
+ sizeof(struct ceph_filelock));
+ }
+ if (err)
+ goto fail;
+ }
+
+ err = ceph_pagelist_append(pagelist, &num_flock_locks, sizeof(u32));
+ if (err)
+ goto fail;
+ for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) {
+ if (lock->fl_flags & FL_FLOCK) {
+ err = lock_to_ceph_filelock(lock, &cephlock);
+ if (err)
+ goto fail;
+ err = ceph_pagelist_append(pagelist, &cephlock,
+ sizeof(struct ceph_filelock));
+ }
+ if (err)
+ goto fail;
+ }
+fail:
+ return err;
+}
+
+/*
+ * Given a pointer to a lock, convert it to a ceph filelock
+ */
+int lock_to_ceph_filelock(struct file_lock *lock,
+ struct ceph_filelock *cephlock)
+{
+ int err = 0;
+
+ cephlock->start = cpu_to_le64(lock->fl_start);
+ cephlock->length = cpu_to_le64(lock->fl_end - lock->fl_start + 1);
+ cephlock->client = cpu_to_le64(0);
+ cephlock->pid = cpu_to_le64(lock->fl_pid);
+ cephlock->pid_namespace = cpu_to_le64((u64)lock->fl_nspid);
+
+ switch (lock->fl_type) {
+ case F_RDLCK:
+ cephlock->type = CEPH_LOCK_SHARED;
+ break;
+ case F_WRLCK:
+ cephlock->type = CEPH_LOCK_EXCL;
+ break;
+ case F_UNLCK:
+ cephlock->type = CEPH_LOCK_UNLOCK;
+ break;
+ default:
+ dout("Have unknown lock type %d", lock->fl_type);
+ err = -EINVAL;
+ }
+
+ return err;
+}
#include <linux/wait.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include "mds_client.h"
#include "mon_client.h"
* are no longer valid.
*/
+struct ceph_reconnect_state {
+ struct ceph_pagelist *pagelist;
+ bool flock;
+};
+
static void __wake_requests(struct ceph_mds_client *mdsc,
struct list_head *head);
kfree(req->r_path1);
kfree(req->r_path2);
put_request_session(req);
- ceph_unreserve_caps(&req->r_caps_reservation);
+ ceph_unreserve_caps(req->r_mdsc, &req->r_caps_reservation);
kfree(req);
}
{
req->r_tid = ++mdsc->last_tid;
if (req->r_num_caps)
- ceph_reserve_caps(&req->r_caps_reservation, req->r_num_caps);
+ ceph_reserve_caps(mdsc, &req->r_caps_reservation,
+ req->r_num_caps);
dout("__register_request %p tid %lld\n", req, req->r_tid);
ceph_mdsc_get_request(req);
__insert_request(mdsc, req);
return 0;
}
+/*
+ * open sessions for any export targets for the given mds
+ *
+ * called under mdsc->mutex
+ */
+static void __open_export_target_sessions(struct ceph_mds_client *mdsc,
+ struct ceph_mds_session *session)
+{
+ struct ceph_mds_info *mi;
+ struct ceph_mds_session *ts;
+ int i, mds = session->s_mds;
+ int target;
+
+ if (mds >= mdsc->mdsmap->m_max_mds)
+ return;
+ mi = &mdsc->mdsmap->m_info[mds];
+ dout("open_export_target_sessions for mds%d (%d targets)\n",
+ session->s_mds, mi->num_export_targets);
+
+ for (i = 0; i < mi->num_export_targets; i++) {
+ target = mi->export_targets[i];
+ ts = __ceph_lookup_mds_session(mdsc, target);
+ if (!ts) {
+ ts = register_session(mdsc, target);
+ if (IS_ERR(ts))
+ return;
+ }
+ if (session->s_state == CEPH_MDS_SESSION_NEW ||
+ session->s_state == CEPH_MDS_SESSION_CLOSING)
+ __open_session(mdsc, session);
+ else
+ dout(" mds%d target mds%d %p is %s\n", session->s_mds,
+ i, ts, session_state_name(ts->s_state));
+ ceph_put_mds_session(ts);
+ }
+}
+
+void ceph_mdsc_open_export_target_sessions(struct ceph_mds_client *mdsc,
+ struct ceph_mds_session *session)
+{
+ mutex_lock(&mdsc->mutex);
+ __open_export_target_sessions(mdsc, session);
+ mutex_unlock(&mdsc->mutex);
+}
+
/*
* session caps
*/
last_inode = NULL;
}
if (old_cap) {
- ceph_put_cap(old_cap);
+ ceph_put_cap(session->s_mdsc, old_cap);
old_cap = NULL;
}
if (last_inode)
iput(last_inode);
if (old_cap)
- ceph_put_cap(old_cap);
+ ceph_put_cap(session->s_mdsc, old_cap);
return ret;
}
* Called under s_mutex.
*/
int ceph_add_cap_releases(struct ceph_mds_client *mdsc,
- struct ceph_mds_session *session,
- int extra)
+ struct ceph_mds_session *session)
{
- struct ceph_msg *msg;
+ struct ceph_msg *msg, *partial = NULL;
struct ceph_mds_cap_release *head;
int err = -ENOMEM;
+ int extra = mdsc->client->mount_args->cap_release_safety;
+ int num;
- if (extra < 0)
- extra = mdsc->client->mount_args->cap_release_safety;
+ dout("add_cap_releases %p mds%d extra %d\n", session, session->s_mds,
+ extra);
spin_lock(&session->s_cap_lock);
struct ceph_msg,
list_head);
head = msg->front.iov_base;
- extra += CEPH_CAPS_PER_RELEASE - le32_to_cpu(head->num);
+ num = le32_to_cpu(head->num);
+ if (num) {
+ dout(" partial %p with (%d/%d)\n", msg, num,
+ (int)CEPH_CAPS_PER_RELEASE);
+ extra += CEPH_CAPS_PER_RELEASE - num;
+ partial = msg;
+ }
}
-
while (session->s_num_cap_releases < session->s_nr_caps + extra) {
spin_unlock(&session->s_cap_lock);
msg = ceph_msg_new(CEPH_MSG_CLIENT_CAPRELEASE, PAGE_CACHE_SIZE,
session->s_num_cap_releases += CEPH_CAPS_PER_RELEASE;
}
- if (!list_empty(&session->s_cap_releases)) {
- msg = list_first_entry(&session->s_cap_releases,
- struct ceph_msg,
- list_head);
- head = msg->front.iov_base;
- if (head->num) {
- dout(" queueing non-full %p (%d)\n", msg,
- le32_to_cpu(head->num));
- list_move_tail(&msg->list_head,
- &session->s_cap_releases_done);
- session->s_num_cap_releases -=
- CEPH_CAPS_PER_RELEASE - le32_to_cpu(head->num);
- }
+ if (partial) {
+ head = partial->front.iov_base;
+ num = le32_to_cpu(head->num);
+ dout(" queueing partial %p with %d/%d\n", partial, num,
+ (int)CEPH_CAPS_PER_RELEASE);
+ list_move_tail(&partial->list_head,
+ &session->s_cap_releases_done);
+ session->s_num_cap_releases -= CEPH_CAPS_PER_RELEASE - num;
}
err = 0;
spin_unlock(&session->s_cap_lock);
return ERR_PTR(-ENOMEM);
mutex_init(&req->r_fill_mutex);
+ req->r_mdsc = mdsc;
req->r_started = jiffies;
req->r_resend_mds = -1;
INIT_LIST_HEAD(&req->r_unsafe_dir_item);
req->r_mds = mds;
req->r_attempts++;
+ if (req->r_inode) {
+ struct ceph_cap *cap =
+ ceph_get_cap_for_mds(ceph_inode(req->r_inode), mds);
+
+ if (cap)
+ req->r_sent_on_mseq = cap->mseq;
+ else
+ req->r_sent_on_mseq = -1;
+ }
dout("prepare_send_request %p tid %lld %s (attempt %d)\n", req,
req->r_tid, ceph_mds_op_name(req->r_op), req->r_attempts);
result = le32_to_cpu(head->result);
/*
- * Tolerate 2 consecutive ESTALEs from the same mds.
- * FIXME: we should be looking at the cap migrate_seq.
+ * Handle an ESTALE
+ * if we're not talking to the authority, send to them
+ * if the authority has changed while we weren't looking,
+ * send to new authority
+ * Otherwise we just have to return an ESTALE
*/
if (result == -ESTALE) {
- req->r_direct_mode = USE_AUTH_MDS;
- req->r_num_stale++;
- if (req->r_num_stale <= 2) {
+ dout("got ESTALE on request %llu", req->r_tid);
+ if (!req->r_inode) {
+ /* do nothing; not an authority problem */
+ } else if (req->r_direct_mode != USE_AUTH_MDS) {
+ dout("not using auth, setting for that now");
+ req->r_direct_mode = USE_AUTH_MDS;
__do_request(mdsc, req);
mutex_unlock(&mdsc->mutex);
goto out;
+ } else {
+ struct ceph_inode_info *ci = ceph_inode(req->r_inode);
+ struct ceph_cap *cap =
+ ceph_get_cap_for_mds(ci, req->r_mds);;
+
+ dout("already using auth");
+ if ((!cap || cap != ci->i_auth_cap) ||
+ (cap->mseq != req->r_sent_on_mseq)) {
+ dout("but cap changed, so resending");
+ __do_request(mdsc, req);
+ mutex_unlock(&mdsc->mutex);
+ goto out;
+ }
}
- } else {
- req->r_num_stale = 0;
+ dout("have to return ESTALE on request %llu", req->r_tid);
}
+
if (head->safe) {
req->r_got_safe = true;
__unregister_request(mdsc, req);
if (err == 0) {
if (result == 0 && rinfo->dir_nr)
ceph_readdir_prepopulate(req, req->r_session);
- ceph_unreserve_caps(&req->r_caps_reservation);
+ ceph_unreserve_caps(mdsc, &req->r_caps_reservation);
}
mutex_unlock(&req->r_fill_mutex);
}
mutex_unlock(&mdsc->mutex);
- ceph_add_cap_releases(mdsc, req->r_session, -1);
+ ceph_add_cap_releases(mdsc, req->r_session);
mutex_unlock(&session->s_mutex);
/* kick calling process */
static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap,
void *arg)
{
- struct ceph_mds_cap_reconnect rec;
+ union {
+ struct ceph_mds_cap_reconnect v2;
+ struct ceph_mds_cap_reconnect_v1 v1;
+ } rec;
+ size_t reclen;
struct ceph_inode_info *ci;
- struct ceph_pagelist *pagelist = arg;
+ struct ceph_reconnect_state *recon_state = arg;
+ struct ceph_pagelist *pagelist = recon_state->pagelist;
char *path;
int pathlen, err;
u64 pathbase;
spin_lock(&inode->i_lock);
cap->seq = 0; /* reset cap seq */
cap->issue_seq = 0; /* and issue_seq */
- rec.cap_id = cpu_to_le64(cap->cap_id);
- rec.pathbase = cpu_to_le64(pathbase);
- rec.wanted = cpu_to_le32(__ceph_caps_wanted(ci));
- rec.issued = cpu_to_le32(cap->issued);
- rec.size = cpu_to_le64(inode->i_size);
- ceph_encode_timespec(&rec.mtime, &inode->i_mtime);
- ceph_encode_timespec(&rec.atime, &inode->i_atime);
- rec.snaprealm = cpu_to_le64(ci->i_snap_realm->ino);
+
+ if (recon_state->flock) {
+ rec.v2.cap_id = cpu_to_le64(cap->cap_id);
+ rec.v2.wanted = cpu_to_le32(__ceph_caps_wanted(ci));
+ rec.v2.issued = cpu_to_le32(cap->issued);
+ rec.v2.snaprealm = cpu_to_le64(ci->i_snap_realm->ino);
+ rec.v2.pathbase = cpu_to_le64(pathbase);
+ rec.v2.flock_len = 0;
+ reclen = sizeof(rec.v2);
+ } else {
+ rec.v1.cap_id = cpu_to_le64(cap->cap_id);
+ rec.v1.wanted = cpu_to_le32(__ceph_caps_wanted(ci));
+ rec.v1.issued = cpu_to_le32(cap->issued);
+ rec.v1.size = cpu_to_le64(inode->i_size);
+ ceph_encode_timespec(&rec.v1.mtime, &inode->i_mtime);
+ ceph_encode_timespec(&rec.v1.atime, &inode->i_atime);
+ rec.v1.snaprealm = cpu_to_le64(ci->i_snap_realm->ino);
+ rec.v1.pathbase = cpu_to_le64(pathbase);
+ reclen = sizeof(rec.v1);
+ }
spin_unlock(&inode->i_lock);
- err = ceph_pagelist_append(pagelist, &rec, sizeof(rec));
+ if (recon_state->flock) {
+ int num_fcntl_locks, num_flock_locks;
+
+ lock_kernel();
+ ceph_count_locks(inode, &num_fcntl_locks, &num_flock_locks);
+ rec.v2.flock_len = (2*sizeof(u32) +
+ (num_fcntl_locks+num_flock_locks) *
+ sizeof(struct ceph_filelock));
+
+ err = ceph_pagelist_append(pagelist, &rec, reclen);
+ if (!err)
+ err = ceph_encode_locks(inode, pagelist,
+ num_fcntl_locks,
+ num_flock_locks);
+ unlock_kernel();
+ }
out:
kfree(path);
int mds = session->s_mds;
int err = -ENOMEM;
struct ceph_pagelist *pagelist;
+ struct ceph_reconnect_state recon_state;
pr_info("mds%d reconnect start\n", mds);
err = ceph_pagelist_encode_32(pagelist, session->s_nr_caps);
if (err)
goto fail;
- err = iterate_session_caps(session, encode_caps_cb, pagelist);
+
+ recon_state.pagelist = pagelist;
+ recon_state.flock = session->s_con.peer_features & CEPH_FEATURE_FLOCK;
+ err = iterate_session_caps(session, encode_caps_cb, &recon_state);
if (err < 0)
goto fail;
}
reply->pagelist = pagelist;
+ if (recon_state.flock)
+ reply->hdr.version = cpu_to_le16(2);
reply->hdr.data_len = cpu_to_le32(pagelist->length);
reply->nr_pages = calc_pages_for(0, pagelist->length);
ceph_con_send(&session->s_con, reply);
oldstate = ceph_mdsmap_get_state(oldmap, i);
newstate = ceph_mdsmap_get_state(newmap, i);
- dout("check_new_map mds%d state %s -> %s (session %s)\n",
+ dout("check_new_map mds%d state %s%s -> %s%s (session %s)\n",
i, ceph_mds_state_name(oldstate),
+ ceph_mdsmap_is_laggy(oldmap, i) ? " (laggy)" : "",
ceph_mds_state_name(newstate),
+ ceph_mdsmap_is_laggy(newmap, i) ? " (laggy)" : "",
session_state_name(s->s_state));
if (memcmp(ceph_mdsmap_get_addr(oldmap, i),
wake_up_session_caps(s, 1);
}
}
+
+ for (i = 0; i < newmap->m_max_mds && i < mdsc->max_sessions; i++) {
+ s = mdsc->sessions[i];
+ if (!s)
+ continue;
+ if (!ceph_mdsmap_is_laggy(newmap, i))
+ continue;
+ if (s->s_state == CEPH_MDS_SESSION_OPEN ||
+ s->s_state == CEPH_MDS_SESSION_HUNG ||
+ s->s_state == CEPH_MDS_SESSION_CLOSING) {
+ dout(" connecting to export targets of laggy mds%d\n",
+ i);
+ __open_export_target_sessions(mdsc, s);
+ }
+ }
}
send_renew_caps(mdsc, s);
else
ceph_con_keepalive(&s->s_con);
- ceph_add_cap_releases(mdsc, s, -1);
+ ceph_add_cap_releases(mdsc, s);
if (s->s_state == CEPH_MDS_SESSION_OPEN ||
s->s_state == CEPH_MDS_SESSION_HUNG)
ceph_send_cap_releases(mdsc, s);
spin_lock_init(&mdsc->dentry_lru_lock);
INIT_LIST_HEAD(&mdsc->dentry_lru);
+ ceph_caps_init(mdsc);
+ ceph_adjust_min_caps(mdsc, client->min_caps);
+
return 0;
}
if (mdsc->mdsmap)
ceph_mdsmap_destroy(mdsc->mdsmap);
kfree(mdsc->sessions);
+ ceph_caps_finalize(mdsc);
}
struct ceph_mds_request {
u64 r_tid; /* transaction id */
struct rb_node r_node;
+ struct ceph_mds_client *r_mdsc;
int r_op; /* mds op code */
int r_mds;
int r_attempts; /* resend attempts */
int r_num_fwd; /* number of forward attempts */
- int r_num_stale;
int r_resend_mds; /* mds to resend to next, if any*/
+ u32 r_sent_on_mseq; /* cap mseq request was sent at*/
struct kref r_kref;
struct list_head r_wait;
spinlock_t cap_dirty_lock; /* protects above items */
wait_queue_head_t cap_flushing_wq;
+ /*
+ * Cap reservations
+ *
+ * Maintain a global pool of preallocated struct ceph_caps, referenced
+ * by struct ceph_caps_reservations. This ensures that we preallocate
+ * memory needed to successfully process an MDS response. (If an MDS
+ * sends us cap information and we fail to process it, we will have
+ * problems due to the client and MDS being out of sync.)
+ *
+ * Reservations are 'owned' by a ceph_cap_reservation context.
+ */
+ spinlock_t caps_list_lock;
+ struct list_head caps_list; /* unused (reserved or
+ unreserved) */
+ int caps_total_count; /* total caps allocated */
+ int caps_use_count; /* in use */
+ int caps_reserve_count; /* unused, reserved */
+ int caps_avail_count; /* unused, unreserved */
+ int caps_min_count; /* keep at least this many
+ (unreserved) */
+
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_file;
#endif
}
extern int ceph_add_cap_releases(struct ceph_mds_client *mdsc,
- struct ceph_mds_session *session,
- int extra);
+ struct ceph_mds_session *session);
extern void ceph_send_cap_releases(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session);
extern void ceph_mdsc_handle_map(struct ceph_mds_client *mdsc,
struct ceph_msg *msg);
+extern void ceph_mdsc_open_export_target_sessions(struct ceph_mds_client *mdsc,
+ struct ceph_mds_session *session);
+
#endif
struct ceph_entity_addr addr;
u32 num_export_targets;
void *pexport_targets = NULL;
+ struct ceph_timespec laggy_since;
ceph_decode_need(p, end, sizeof(u64)*2 + 1 + sizeof(u32), bad);
global_id = ceph_decode_64(p);
state_seq = ceph_decode_64(p);
ceph_decode_copy(p, &addr, sizeof(addr));
ceph_decode_addr(&addr);
- *p += sizeof(struct ceph_timespec);
+ ceph_decode_copy(p, &laggy_since, sizeof(laggy_since));
*p += sizeof(u32);
ceph_decode_32_safe(p, end, namelen, bad);
*p += namelen;
m->m_info[mds].global_id = global_id;
m->m_info[mds].state = state;
m->m_info[mds].addr = addr;
+ m->m_info[mds].laggy =
+ (laggy_since.tv_sec != 0 ||
+ laggy_since.tv_nsec != 0);
m->m_info[mds].num_export_targets = num_export_targets;
if (num_export_targets) {
m->m_info[mds].export_targets =
struct ceph_entity_addr addr;
s32 state;
int num_export_targets;
+ bool laggy;
u32 *export_targets;
};
return m->m_info[w].state;
}
+static inline bool ceph_mdsmap_is_laggy(struct ceph_mdsmap *m, int w)
+{
+ if (w >= 0 && w < m->m_max_mds)
+ return m->m_info[w].laggy;
+ return false;
+}
+
extern int ceph_mdsmap_get_random_mds(struct ceph_mdsmap *m);
extern struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end);
extern void ceph_mdsmap_destroy(struct ceph_mdsmap *m);
destroy_workqueue(ceph_msgr_wq);
}
-void ceph_msgr_flush()
+void ceph_msgr_flush(void)
{
flush_workqueue(ceph_msgr_wq);
}
dout("prepare_write_connect %p cseq=%d gseq=%d proto=%d\n", con,
con->connect_seq, global_seq, proto);
- con->out_connect.features = cpu_to_le64(CEPH_FEATURE_SUPPORTED_CLIENT);
+ con->out_connect.features = cpu_to_le64(CEPH_FEATURE_SUPPORTED);
con->out_connect.host_type = cpu_to_le32(CEPH_ENTITY_TYPE_CLIENT);
con->out_connect.connect_seq = cpu_to_le32(con->connect_seq);
con->out_connect.global_seq = cpu_to_le32(global_seq);
sizeof(con->peer_addr)) != 0 &&
!(addr_is_blank(&con->actual_peer_addr.in_addr) &&
con->actual_peer_addr.nonce == con->peer_addr.nonce)) {
- pr_warning("wrong peer, want %s/%lld, got %s/%lld\n",
+ pr_warning("wrong peer, want %s/%d, got %s/%d\n",
pr_addr(&con->peer_addr.in_addr),
- le64_to_cpu(con->peer_addr.nonce),
+ (int)le32_to_cpu(con->peer_addr.nonce),
pr_addr(&con->actual_peer_addr.in_addr),
- le64_to_cpu(con->actual_peer_addr.nonce));
+ (int)le32_to_cpu(con->actual_peer_addr.nonce));
con->error_msg = "wrong peer at address";
return -1;
}
static int process_connect(struct ceph_connection *con)
{
- u64 sup_feat = CEPH_FEATURE_SUPPORTED_CLIENT;
- u64 req_feat = CEPH_FEATURE_REQUIRED_CLIENT;
+ u64 sup_feat = CEPH_FEATURE_SUPPORTED;
+ u64 req_feat = CEPH_FEATURE_REQUIRED;
u64 server_feat = le64_to_cpu(con->in_reply.features);
dout("process_connect on %p tag %d\n", con, (int)con->in_tag);
static int read_partial_message_section(struct ceph_connection *con,
- struct kvec *section, unsigned int sec_len,
- u32 *crc)
+ struct kvec *section,
+ unsigned int sec_len, u32 *crc)
{
int left;
int ret;
/* middle */
if (m->middle) {
- ret = read_partial_message_section(con, &m->middle->vec, middle_len,
+ ret = read_partial_message_section(con, &m->middle->vec,
+ middle_len,
&con->in_middle_crc);
if (ret <= 0)
return ret;
/*
* in case we faulted due to authentication, invalidate our
* current tickets so that we can get new ones.
- */
+ */
if (con->auth_retry && con->ops->invalidate_authorizer) {
dout("calling invalidate_authorizer()\n");
con->ops->invalidate_authorizer(con);
}
/*
- * statfs
+ * generic requests (e.g., statfs, poolop)
*/
static struct ceph_mon_generic_request *__lookup_generic_req(
struct ceph_mon_client *monc, u64 tid)
return m;
}
+static int do_generic_request(struct ceph_mon_client *monc,
+ struct ceph_mon_generic_request *req)
+{
+ int err;
+
+ /* register request */
+ mutex_lock(&monc->mutex);
+ req->tid = ++monc->last_tid;
+ req->request->hdr.tid = cpu_to_le64(req->tid);
+ __insert_generic_request(monc, req);
+ monc->num_generic_requests++;
+ ceph_con_send(monc->con, ceph_msg_get(req->request));
+ mutex_unlock(&monc->mutex);
+
+ err = wait_for_completion_interruptible(&req->completion);
+
+ mutex_lock(&monc->mutex);
+ rb_erase(&req->node, &monc->generic_request_tree);
+ monc->num_generic_requests--;
+ mutex_unlock(&monc->mutex);
+
+ if (!err)
+ err = req->result;
+ return err;
+}
+
+/*
+ * statfs
+ */
static void handle_statfs_reply(struct ceph_mon_client *monc,
struct ceph_msg *msg)
{
return;
bad:
- pr_err("corrupt generic reply, no tid\n");
+ pr_err("corrupt generic reply, tid %llu\n", tid);
ceph_msg_dump(msg);
}
kref_init(&req->kref);
req->buf = buf;
+ req->buf_len = sizeof(*buf);
init_completion(&req->completion);
err = -ENOMEM;
h->monhdr.session_mon_tid = 0;
h->fsid = monc->monmap->fsid;
- /* register request */
- mutex_lock(&monc->mutex);
- req->tid = ++monc->last_tid;
- req->request->hdr.tid = cpu_to_le64(req->tid);
- __insert_generic_request(monc, req);
- monc->num_generic_requests++;
- mutex_unlock(&monc->mutex);
+ err = do_generic_request(monc, req);
- /* send request and wait */
- ceph_con_send(monc->con, ceph_msg_get(req->request));
- err = wait_for_completion_interruptible(&req->completion);
+out:
+ kref_put(&req->kref, release_generic_request);
+ return err;
+}
+
+/*
+ * pool ops
+ */
+static int get_poolop_reply_buf(const char *src, size_t src_len,
+ char *dst, size_t dst_len)
+{
+ u32 buf_len;
+
+ if (src_len != sizeof(u32) + dst_len)
+ return -EINVAL;
+
+ buf_len = le32_to_cpu(*(u32 *)src);
+ if (buf_len != dst_len)
+ return -EINVAL;
+
+ memcpy(dst, src + sizeof(u32), dst_len);
+ return 0;
+}
+
+static void handle_poolop_reply(struct ceph_mon_client *monc,
+ struct ceph_msg *msg)
+{
+ struct ceph_mon_generic_request *req;
+ struct ceph_mon_poolop_reply *reply = msg->front.iov_base;
+ u64 tid = le64_to_cpu(msg->hdr.tid);
+
+ if (msg->front.iov_len < sizeof(*reply))
+ goto bad;
+ dout("handle_poolop_reply %p tid %llu\n", msg, tid);
mutex_lock(&monc->mutex);
- rb_erase(&req->node, &monc->generic_request_tree);
- monc->num_generic_requests--;
+ req = __lookup_generic_req(monc, tid);
+ if (req) {
+ if (req->buf_len &&
+ get_poolop_reply_buf(msg->front.iov_base + sizeof(*reply),
+ msg->front.iov_len - sizeof(*reply),
+ req->buf, req->buf_len) < 0) {
+ mutex_unlock(&monc->mutex);
+ goto bad;
+ }
+ req->result = le32_to_cpu(reply->reply_code);
+ get_generic_request(req);
+ }
mutex_unlock(&monc->mutex);
+ if (req) {
+ complete(&req->completion);
+ put_generic_request(req);
+ }
+ return;
- if (!err)
- err = req->result;
+bad:
+ pr_err("corrupt generic reply, tid %llu\n", tid);
+ ceph_msg_dump(msg);
+}
+
+/*
+ * Do a synchronous pool op.
+ */
+int ceph_monc_do_poolop(struct ceph_mon_client *monc, u32 op,
+ u32 pool, u64 snapid,
+ char *buf, int len)
+{
+ struct ceph_mon_generic_request *req;
+ struct ceph_mon_poolop *h;
+ int err;
+
+ req = kzalloc(sizeof(*req), GFP_NOFS);
+ if (!req)
+ return -ENOMEM;
+
+ kref_init(&req->kref);
+ req->buf = buf;
+ req->buf_len = len;
+ init_completion(&req->completion);
+
+ err = -ENOMEM;
+ req->request = ceph_msg_new(CEPH_MSG_POOLOP, sizeof(*h), GFP_NOFS);
+ if (!req->request)
+ goto out;
+ req->reply = ceph_msg_new(CEPH_MSG_POOLOP_REPLY, 1024, GFP_NOFS);
+ if (!req->reply)
+ goto out;
+
+ /* fill out request */
+ req->request->hdr.version = cpu_to_le16(2);
+ h = req->request->front.iov_base;
+ h->monhdr.have_version = 0;
+ h->monhdr.session_mon = cpu_to_le16(-1);
+ h->monhdr.session_mon_tid = 0;
+ h->fsid = monc->monmap->fsid;
+ h->pool = cpu_to_le32(pool);
+ h->op = cpu_to_le32(op);
+ h->auid = 0;
+ h->snapid = cpu_to_le64(snapid);
+ h->name_len = 0;
+
+ err = do_generic_request(monc, req);
out:
kref_put(&req->kref, release_generic_request);
return err;
}
+int ceph_monc_create_snapid(struct ceph_mon_client *monc,
+ u32 pool, u64 *snapid)
+{
+ return ceph_monc_do_poolop(monc, POOL_OP_CREATE_UNMANAGED_SNAP,
+ pool, 0, (char *)snapid, sizeof(*snapid));
+
+}
+
+int ceph_monc_delete_snapid(struct ceph_mon_client *monc,
+ u32 pool, u64 snapid)
+{
+ return ceph_monc_do_poolop(monc, POOL_OP_CREATE_UNMANAGED_SNAP,
+ pool, snapid, 0, 0);
+
+}
+
/*
- * Resend pending statfs requests.
+ * Resend pending generic requests.
*/
static void __resend_generic_request(struct ceph_mon_client *monc)
{
handle_statfs_reply(monc, msg);
break;
+ case CEPH_MSG_POOLOP_REPLY:
+ handle_poolop_reply(monc, msg);
+ break;
+
case CEPH_MSG_MON_MAP:
ceph_monc_handle_map(monc, msg);
break;
case CEPH_MSG_MON_SUBSCRIBE_ACK:
m = ceph_msg_get(monc->m_subscribe_ack);
break;
+ case CEPH_MSG_POOLOP_REPLY:
case CEPH_MSG_STATFS_REPLY:
return get_generic_reply(con, hdr, skip);
case CEPH_MSG_AUTH_REPLY:
struct rb_node node;
int result;
void *buf;
+ int buf_len;
struct completion completion;
struct ceph_msg *request; /* original request */
struct ceph_msg *reply; /* and reply */
extern int ceph_monc_validate_auth(struct ceph_mon_client *monc);
+extern int ceph_monc_create_snapid(struct ceph_mon_client *monc,
+ u32 pool, u64 *snapid);
+extern int ceph_monc_delete_snapid(struct ceph_mon_client *monc,
+ u32 pool, u64 snapid);
#endif
-#ifndef __MSGR_H
-#define __MSGR_H
+#ifndef CEPH_MSGR_H
+#define CEPH_MSGR_H
/*
* Data types for message passing layer used by Ceph.
/* it may be a short read due to an object boundary */
req->r_pages = pages;
- num_pages = calc_pages_for(off, *plen);
- req->r_num_pages = num_pages;
dout("readpages final extent is %llu~%llu (%d pages)\n",
off, *plen, req->r_num_pages);
/* it may be a short write due to an object boundary */
req->r_pages = pages;
- req->r_num_pages = calc_pages_for(off, len);
dout("writepages %llu~%llu (%d pages)\n", off, len,
req->r_num_pages);
* authentication
*/
static int get_authorizer(struct ceph_connection *con,
- void **buf, int *len, int *proto,
- void **reply_buf, int *reply_len, int force_new)
+ void **buf, int *len, int *proto,
+ void **reply_buf, int *reply_len, int force_new)
{
struct ceph_osd *o = con->private;
struct ceph_osd_client *osdc = o->o_osdc;
&o->o_authorizer_reply_buf,
&o->o_authorizer_reply_buf_len);
if (ret)
- return ret;
+ return ret;
}
*proto = ac->protocol;
kfree(pi);
}
-void __decode_pool(void **p, struct ceph_pg_pool_info *pi)
+static int __decode_pool(void **p, void *end, struct ceph_pg_pool_info *pi)
{
+ unsigned n, m;
+
ceph_decode_copy(p, &pi->v, sizeof(pi->v));
calc_pg_masks(pi);
- *p += le32_to_cpu(pi->v.num_snaps) * sizeof(u64);
+
+ /* num_snaps * snap_info_t */
+ n = le32_to_cpu(pi->v.num_snaps);
+ while (n--) {
+ ceph_decode_need(p, end, sizeof(u64) + 1 + sizeof(u64) +
+ sizeof(struct ceph_timespec), bad);
+ *p += sizeof(u64) + /* key */
+ 1 + sizeof(u64) + /* u8, snapid */
+ sizeof(struct ceph_timespec);
+ m = ceph_decode_32(p); /* snap name */
+ *p += m;
+ }
+
*p += le32_to_cpu(pi->v.num_removed_snap_intervals) * sizeof(u64) * 2;
+ return 0;
+
+bad:
+ return -EINVAL;
}
static int __decode_pool_names(void **p, void *end, struct ceph_osdmap *map)
kfree(pi);
goto bad;
}
- __decode_pool(p, pi);
+ err = __decode_pool(p, end, pi);
+ if (err < 0)
+ goto bad;
__insert_pg_pool(&map->pg_pools, pi);
}
pi->id = pool;
__insert_pg_pool(&map->pg_pools, pi);
}
- __decode_pool(p, pi);
+ err = __decode_pool(p, end, pi);
+ if (err < 0)
+ goto bad;
}
if (version >= 5 && __decode_pool_names(p, end, map) < 0)
goto bad;
node)->pgid, pgid) <= 0) {
struct ceph_pg_mapping *cur =
rb_entry(rbp, struct ceph_pg_mapping, node);
-
+
rbp = rb_next(rbp);
dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
rb_erase(&cur->node, &map->pg_temp);
ruleno = crush_find_rule(osdmap->crush, pool->v.crush_ruleset,
pool->v.type, pool->v.size);
if (ruleno < 0) {
- pr_err("no crush rule pool %d type %d size %d\n",
- poolid, pool->v.type, pool->v.size);
+ pr_err("no crush rule pool %d ruleset %d type %d size %d\n",
+ poolid, pool->v.crush_ruleset, pool->v.type,
+ pool->v.size);
return NULL;
}
-#ifndef __RADOS_H
-#define __RADOS_H
+#ifndef CEPH_RADOS_H
+#define CEPH_RADOS_H
/*
* Data types for the Ceph distributed object storage layer RADOS
CEPH_OSD_OP_TMAPGET = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 12,
CEPH_OSD_OP_CREATE = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 13,
+ CEPH_OSD_OP_ROLLBACK= CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 14,
/** attrs **/
/* read */
return (op & CEPH_OSD_OP_MODE) == CEPH_OSD_OP_MODE_WR;
}
+/*
+ * note that the following tmap stuff is also defined in the ceph librados.h
+ * any modification here needs to be updated there
+ */
#define CEPH_OSD_TMAP_HDR 'h'
#define CEPH_OSD_TMAP_SET 's'
#define CEPH_OSD_TMAP_RM 'r'
CEPH_OSD_FLAG_PARALLELEXEC = 512, /* execute op in parallel */
CEPH_OSD_FLAG_PGOP = 1024, /* pg op, no object */
CEPH_OSD_FLAG_EXEC = 2048, /* op may exec */
+ CEPH_OSD_FLAG_EXEC_PUBLIC = 4096, /* op may exec (public) */
};
enum {
struct {
__le64 cookie, count;
} __attribute__ ((packed)) pgls;
+ struct {
+ __le64 snapid;
+ } __attribute__ ((packed)) snap;
};
__le32 payload_len;
} __attribute__ ((packed));
#include "ceph_debug.h"
#include <linux/backing-dev.h>
+#include <linux/ctype.h>
#include <linux/fs.h>
#include <linux/inet.h>
#include <linux/in6.h>
}
-static int ceph_syncfs(struct super_block *sb, int wait)
+static int ceph_sync_fs(struct super_block *sb, int wait)
{
- dout("sync_fs %d\n", wait);
+ struct ceph_client *client = ceph_sb_to_client(sb);
+
+ if (!wait) {
+ dout("sync_fs (non-blocking)\n");
+ ceph_flush_dirty_caps(&client->mdsc);
+ dout("sync_fs (non-blocking) done\n");
+ return 0;
+ }
+
+ dout("sync_fs (blocking)\n");
ceph_osdc_sync(&ceph_sb_to_client(sb)->osdc);
ceph_mdsc_sync(&ceph_sb_to_client(sb)->mdsc);
- dout("sync_fs %d done\n", wait);
+ dout("sync_fs (blocking) done\n");
return 0;
}
struct ceph_mount_args *args = client->mount_args;
if (args->flags & CEPH_OPT_FSID)
- seq_printf(m, ",fsidmajor=%llu,fsidminor%llu",
- le64_to_cpu(*(__le64 *)&args->fsid.fsid[0]),
- le64_to_cpu(*(__le64 *)&args->fsid.fsid[8]));
+ seq_printf(m, ",fsid=%pU", &args->fsid);
if (args->flags & CEPH_OPT_NOSHARE)
seq_puts(m, ",noshare");
if (args->flags & CEPH_OPT_DIRSTAT)
.alloc_inode = ceph_alloc_inode,
.destroy_inode = ceph_destroy_inode,
.write_inode = ceph_write_inode,
- .sync_fs = ceph_syncfs,
+ .sync_fs = ceph_sync_fs,
.put_super = ceph_put_super,
.show_options = ceph_show_options,
.statfs = ceph_statfs,
* mount options
*/
enum {
- Opt_fsidmajor,
- Opt_fsidminor,
- Opt_monport,
Opt_wsize,
Opt_rsize,
Opt_osdtimeout,
Opt_congestion_kb,
Opt_last_int,
/* int args above */
+ Opt_fsid,
Opt_snapdirname,
Opt_name,
Opt_secret,
};
static match_table_t arg_tokens = {
- {Opt_fsidmajor, "fsidmajor=%ld"},
- {Opt_fsidminor, "fsidminor=%ld"},
- {Opt_monport, "monport=%d"},
{Opt_wsize, "wsize=%d"},
{Opt_rsize, "rsize=%d"},
{Opt_osdtimeout, "osdtimeout=%d"},
{Opt_readdir_max_bytes, "readdir_max_bytes=%d"},
{Opt_congestion_kb, "write_congestion_kb=%d"},
/* int args above */
+ {Opt_fsid, "fsid=%s"},
{Opt_snapdirname, "snapdirname=%s"},
{Opt_name, "name=%s"},
{Opt_secret, "secret=%s"},
{-1, NULL}
};
+static int parse_fsid(const char *str, struct ceph_fsid *fsid)
+{
+ int i = 0;
+ char tmp[3];
+ int err = -EINVAL;
+ int d;
+
+ dout("parse_fsid '%s'\n", str);
+ tmp[2] = 0;
+ while (*str && i < 16) {
+ if (ispunct(*str)) {
+ str++;
+ continue;
+ }
+ if (!isxdigit(str[0]) || !isxdigit(str[1]))
+ break;
+ tmp[0] = str[0];
+ tmp[1] = str[1];
+ if (sscanf(tmp, "%x", &d) < 1)
+ break;
+ fsid->fsid[i] = d & 0xff;
+ i++;
+ str += 2;
+ }
+
+ if (i == 16)
+ err = 0;
+ dout("parse_fsid ret %d got fsid %pU", err, fsid);
+ return err;
+}
static struct ceph_mount_args *parse_mount_args(int flags, char *options,
const char *dev_name,
dout("got token %d\n", token);
}
switch (token) {
- case Opt_fsidmajor:
- *(__le64 *)&args->fsid.fsid[0] = cpu_to_le64(intval);
- break;
- case Opt_fsidminor:
- *(__le64 *)&args->fsid.fsid[8] = cpu_to_le64(intval);
- break;
case Opt_ip:
err = ceph_parse_ips(argstr[0].from,
argstr[0].to,
args->flags |= CEPH_OPT_MYIP;
break;
+ case Opt_fsid:
+ err = parse_fsid(argstr[0].from, &args->fsid);
+ if (err == 0)
+ args->flags |= CEPH_OPT_FSID;
+ break;
case Opt_snapdirname:
kfree(args->snapdir_name);
args->snapdir_name = kstrndup(argstr[0].from,
case Opt_osdkeepalivetimeout:
args->osd_keepalive_timeout = intval;
break;
+ case Opt_osd_idle_ttl:
+ args->osd_idle_ttl = intval;
+ break;
case Opt_mount_timeout:
args->mount_timeout = intval;
break;
/* caps */
client->min_caps = args->max_readdir;
- ceph_adjust_min_caps(client->min_caps);
/* subsystems */
err = ceph_monc_init(&client->monc, client);
ceph_monc_stop(&client->monc);
- ceph_adjust_min_caps(-client->min_caps);
-
ceph_debugfs_client_cleanup(client);
destroy_workqueue(client->wb_wq);
destroy_workqueue(client->pg_inv_wq);
{
if (client->have_fsid) {
if (ceph_fsid_compare(&client->fsid, fsid)) {
- pr_err("bad fsid, had " FSID_FORMAT " got " FSID_FORMAT,
- PR_FSID(&client->fsid), PR_FSID(fsid));
+ pr_err("bad fsid, had %pU got %pU",
+ &client->fsid, fsid);
return -1;
}
} else {
- pr_info("client%lld fsid " FSID_FORMAT "\n",
- client->monc.auth->global_id, PR_FSID(fsid));
+ pr_info("client%lld fsid %pU\n", client->monc.auth->global_id,
+ fsid);
memcpy(&client->fsid, fsid, sizeof(*fsid));
ceph_debugfs_client_init(client);
client->have_fsid = true;
if (ret)
goto out_msgr;
- ceph_caps_init();
-
ret = register_filesystem(&ceph_fs_type);
if (ret)
goto out_icache;
{
dout("exit_ceph\n");
unregister_filesystem(&ceph_fs_type);
- ceph_caps_finalize();
destroy_caches();
ceph_msgr_exit();
ceph_debugfs_cleanup();
#define CEPH_BLOCK_SHIFT 20 /* 1 MB */
#define CEPH_BLOCK (1 << CEPH_BLOCK_SHIFT)
+/*
+ * Supported features
+ */
+#define CEPH_FEATURE_SUPPORTED CEPH_FEATURE_NOSRCADDR | CEPH_FEATURE_FLOCK
+#define CEPH_FEATURE_REQUIRED CEPH_FEATURE_NOSRCADDR
+
/*
* mount options
*/
/* what the mds thinks we want */
extern int __ceph_caps_mds_wanted(struct ceph_inode_info *ci);
-extern void ceph_caps_init(void);
-extern void ceph_caps_finalize(void);
-extern void ceph_adjust_min_caps(int delta);
-extern int ceph_reserve_caps(struct ceph_cap_reservation *ctx, int need);
-extern int ceph_unreserve_caps(struct ceph_cap_reservation *ctx);
+extern void ceph_caps_init(struct ceph_mds_client *mdsc);
+extern void ceph_caps_finalize(struct ceph_mds_client *mdsc);
+extern void ceph_adjust_min_caps(struct ceph_mds_client *mdsc, int delta);
+extern int ceph_reserve_caps(struct ceph_mds_client *mdsc,
+ struct ceph_cap_reservation *ctx, int need);
+extern int ceph_unreserve_caps(struct ceph_mds_client *mdsc,
+ struct ceph_cap_reservation *ctx);
extern void ceph_reservation_status(struct ceph_client *client,
int *total, int *avail, int *used,
int *reserved, int *min);
extern const char *ceph_msg_type_name(int type);
extern int ceph_check_fsid(struct ceph_client *client, struct ceph_fsid *fsid);
-#define FSID_FORMAT "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-" \
- "%02x%02x%02x%02x%02x%02x"
-#define PR_FSID(f) (f)->fsid[0], (f)->fsid[1], (f)->fsid[2], (f)->fsid[3], \
- (f)->fsid[4], (f)->fsid[5], (f)->fsid[6], (f)->fsid[7], \
- (f)->fsid[8], (f)->fsid[9], (f)->fsid[10], (f)->fsid[11], \
- (f)->fsid[12], (f)->fsid[13], (f)->fsid[14], (f)->fsid[15]
-
/* inode.c */
extern const struct inode_operations ceph_file_iops;
__ceph_remove_cap(cap);
spin_unlock(&inode->i_lock);
}
-extern void ceph_put_cap(struct ceph_cap *cap);
+extern void ceph_put_cap(struct ceph_mds_client *mdsc,
+ struct ceph_cap *cap);
extern void ceph_queue_caps_release(struct inode *inode);
extern int ceph_write_inode(struct inode *inode, struct writeback_control *wbc);
extern int ceph_fsync(struct file *file, int datasync);
extern void ceph_kick_flushing_caps(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session);
+extern struct ceph_cap *ceph_get_cap_for_mds(struct ceph_inode_info *ci,
+ int mds);
extern int ceph_get_cap_mds(struct inode *inode);
extern void ceph_get_cap_refs(struct ceph_inode_info *ci, int caps);
extern void ceph_put_cap_refs(struct ceph_inode_info *ci, int had);
/* dir.c */
extern const struct file_operations ceph_dir_fops;
extern const struct inode_operations ceph_dir_iops;
-extern struct dentry_operations ceph_dentry_ops, ceph_snap_dentry_ops,
+extern const struct dentry_operations ceph_dentry_ops, ceph_snap_dentry_ops,
ceph_snapdir_dentry_ops;
extern int ceph_handle_notrace_create(struct inode *dir, struct dentry *dentry);
extern int ceph_debugfs_client_init(struct ceph_client *client);
extern void ceph_debugfs_client_cleanup(struct ceph_client *client);
+/* locks.c */
+extern int ceph_lock(struct file *file, int cmd, struct file_lock *fl);
+extern int ceph_flock(struct file *file, int cmd, struct file_lock *fl);
+extern void ceph_count_locks(struct inode *inode, int *p_num, int *f_num);
+extern int ceph_encode_locks(struct inode *i, struct ceph_pagelist *p,
+ int p_locks, int f_locks);
+extern int lock_to_ceph_filelock(struct file_lock *fl, struct ceph_filelock *c);
+
static inline struct inode *get_dentry_parent_inode(struct dentry *dentry)
{
if (dentry && dentry->d_parent)
}
static int __build_xattrs(struct inode *inode)
+ __releases(inode->i_lock)
+ __acquires(inode->i_lock)
{
u32 namelen;
u32 numattr = 0;
gid Set the default gid for inodes (similar to above).
file_mode If CIFS Unix extensions are not supported by the server
this overrides the default mode for file inodes.
+ fsc Enable local disk caching using FS-Cache (off by default). This
+ option could be useful to improve performance on a slow link,
+ heavily loaded server and/or network where reading from the
+ disk is faster than reading from the server (over the network).
+ This could also impact scalability positively as the
+ number of calls to the server are reduced. However, local
+ caching is not suitable for all workloads for e.g. read-once
+ type workloads. So, you need to consider carefully your
+ workload/scenario before using this option. Currently, local
+ disk caching is functional for CIFS files opened as read-only.
dir_mode If CIFS Unix extensions are not supported by the server
this overrides the default mode for directory inodes.
port attempt to contact the server on this tcp port, before
}
static void
-cifs_clear_inode(struct inode *inode)
+cifs_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
cifs_fscache_release_inode_cookie(inode);
}
return 0;
}
-void cifs_drop_inode(struct inode *inode)
+static int cifs_drop_inode(struct inode *inode)
{
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
- return generic_drop_inode(inode);
-
- return generic_delete_inode(inode);
+ /* no serverino => unconditional eviction */
+ return !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) ||
+ generic_drop_inode(inode);
}
static const struct super_operations cifs_super_ops = {
.alloc_inode = cifs_alloc_inode,
.destroy_inode = cifs_destroy_inode,
.drop_inode = cifs_drop_inode,
- .clear_inode = cifs_clear_inode,
+ .evict_inode = cifs_evict_inode,
/* .delete_inode = cifs_delete_inode, */ /* Do not need above
function unless later we add lazy close of inodes or unless the
kernel forgets to call us with the same number of releases (closes)
return rc;
}
-static int cifs_vmtruncate(struct inode *inode, loff_t offset)
+static void cifs_setsize(struct inode *inode, loff_t offset)
{
loff_t oldsize;
- int err;
spin_lock(&inode->i_lock);
- err = inode_newsize_ok(inode, offset);
- if (err) {
- spin_unlock(&inode->i_lock);
- goto out;
- }
-
oldsize = inode->i_size;
i_size_write(inode, offset);
spin_unlock(&inode->i_lock);
+
truncate_pagecache(inode, oldsize, offset);
- if (inode->i_op->truncate)
- inode->i_op->truncate(inode);
-out:
- return err;
}
static int
if (rc == 0) {
cifsInode->server_eof = attrs->ia_size;
- rc = cifs_vmtruncate(inode, attrs->ia_size);
+ cifs_setsize(inode, attrs->ia_size);
cifs_truncate_page(inode->i_mapping, inode->i_size);
}
xid = GetXid();
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) {
- /* check if we have permission to change attrs */
- rc = inode_change_ok(inode, attrs);
- if (rc < 0)
- goto out;
- else
- rc = 0;
- }
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM)
+ attrs->ia_valid |= ATTR_FORCE;
+
+ rc = inode_change_ok(inode, attrs);
+ if (rc < 0)
+ goto out;
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
CIFS_MOUNT_MAP_SPECIAL_CHR);
}
- if (!rc) {
- rc = inode_setattr(inode, attrs);
+ if (rc)
+ goto out;
- /* force revalidate when any of these times are set since some
- of the fs types (eg ext3, fat) do not have fine enough
- time granularity to match protocol, and we do not have a
- a way (yet) to query the server fs's time granularity (and
- whether it rounds times down).
- */
- if (!rc && (attrs->ia_valid & (ATTR_MTIME | ATTR_CTIME)))
- cifsInode->time = 0;
- }
+ if ((attrs->ia_valid & ATTR_SIZE) &&
+ attrs->ia_size != i_size_read(inode))
+ truncate_setsize(inode, attrs->ia_size);
+
+ setattr_copy(inode, attrs);
+ mark_inode_dirty(inode);
+
+ /* force revalidate when any of these times are set since some
+ of the fs types (eg ext3, fat) do not have fine enough
+ time granularity to match protocol, and we do not have a
+ a way (yet) to query the server fs's time granularity (and
+ whether it rounds times down).
+ */
+ if (attrs->ia_valid & (ATTR_MTIME | ATTR_CTIME))
+ cifsInode->time = 0;
out:
kfree(args);
kfree(full_path);
cFYI(1, "setattr on file %s attrs->iavalid 0x%x",
direntry->d_name.name, attrs->ia_valid);
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) {
- /* check if we have permission to change attrs */
- rc = inode_change_ok(inode, attrs);
- if (rc < 0) {
- FreeXid(xid);
- return rc;
- } else
- rc = 0;
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM)
+ attrs->ia_valid |= ATTR_FORCE;
+
+ rc = inode_change_ok(inode, attrs);
+ if (rc < 0) {
+ FreeXid(xid);
+ return rc;
}
full_path = build_path_from_dentry(direntry);
/* do not need local check to inode_check_ok since the server does
that */
- if (!rc)
- rc = inode_setattr(inode, attrs);
+ if (rc)
+ goto cifs_setattr_exit;
+
+ if ((attrs->ia_valid & ATTR_SIZE) &&
+ attrs->ia_size != i_size_read(inode))
+ truncate_setsize(inode, attrs->ia_size);
+
+ setattr_copy(inode, attrs);
+ mark_inode_dirty(inode);
+ return 0;
+
cifs_setattr_exit:
kfree(full_path);
FreeXid(xid);
#include "coda_int.h"
/* VFS super_block ops */
-static void coda_clear_inode(struct inode *);
+static void coda_evict_inode(struct inode *);
static void coda_put_super(struct super_block *);
static int coda_statfs(struct dentry *dentry, struct kstatfs *buf);
{
.alloc_inode = coda_alloc_inode,
.destroy_inode = coda_destroy_inode,
- .clear_inode = coda_clear_inode,
+ .evict_inode = coda_evict_inode,
.put_super = coda_put_super,
.statfs = coda_statfs,
.remount_fs = coda_remount,
printk("Coda: Bye bye.\n");
}
-static void coda_clear_inode(struct inode *inode)
+static void coda_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
coda_cache_clear_inode(inode);
}
nbytes = req->uc_outSize; /* don't have more space! */
}
if (copy_from_user(req->uc_data, buf, nbytes)) {
- req->uc_flags |= REQ_ABORT;
+ req->uc_flags |= CODA_REQ_ABORT;
wake_up(&req->uc_sleep);
retval = -EFAULT;
goto out;
retval = -EFAULT;
/* If request was not a signal, enqueue and don't free */
- if (!(req->uc_flags & REQ_ASYNC)) {
- req->uc_flags |= REQ_READ;
+ if (!(req->uc_flags & CODA_REQ_ASYNC)) {
+ req->uc_flags |= CODA_REQ_READ;
list_add_tail(&(req->uc_chain), &vcp->vc_processing);
goto out;
}
list_del(&req->uc_chain);
/* Async requests need to be freed here */
- if (req->uc_flags & REQ_ASYNC) {
+ if (req->uc_flags & CODA_REQ_ASYNC) {
CODA_FREE(req->uc_data, sizeof(struct coda_in_hdr));
kfree(req);
continue;
}
- req->uc_flags |= REQ_ABORT;
+ req->uc_flags |= CODA_REQ_ABORT;
wake_up(&req->uc_sleep);
}
list_for_each_entry_safe(req, tmp, &vcp->vc_processing, uc_chain) {
list_del(&req->uc_chain);
- req->uc_flags |= REQ_ABORT;
+ req->uc_flags |= CODA_REQ_ABORT;
wake_up(&req->uc_sleep);
}
(((r)->uc_opcode != CODA_CLOSE && \
(r)->uc_opcode != CODA_STORE && \
(r)->uc_opcode != CODA_RELEASE) || \
- (r)->uc_flags & REQ_READ))
+ (r)->uc_flags & CODA_REQ_READ))
static inline void coda_waitfor_upcall(struct upc_req *req)
{
set_current_state(TASK_UNINTERRUPTIBLE);
/* got a reply */
- if (req->uc_flags & (REQ_WRITE | REQ_ABORT))
+ if (req->uc_flags & (CODA_REQ_WRITE | CODA_REQ_ABORT))
break;
if (blocked && time_after(jiffies, timeout) &&
coda_waitfor_upcall(req);
/* Op went through, interrupt or not... */
- if (req->uc_flags & REQ_WRITE) {
+ if (req->uc_flags & CODA_REQ_WRITE) {
out = (union outputArgs *)req->uc_data;
/* here we map positive Venus errors to kernel errors */
error = -out->oh.result;
}
error = -EINTR;
- if ((req->uc_flags & REQ_ABORT) || !signal_pending(current)) {
+ if ((req->uc_flags & CODA_REQ_ABORT) || !signal_pending(current)) {
printk(KERN_WARNING "coda: Unexpected interruption.\n");
goto exit;
}
/* Interrupted before venus read it. */
- if (!(req->uc_flags & REQ_READ))
+ if (!(req->uc_flags & CODA_REQ_READ))
goto exit;
/* Venus saw the upcall, make sure we can send interrupt signal */
sig_inputArgs->ih.opcode = CODA_SIGNAL;
sig_inputArgs->ih.unique = req->uc_unique;
- sig_req->uc_flags = REQ_ASYNC;
+ sig_req->uc_flags = CODA_REQ_ASYNC;
sig_req->uc_opcode = sig_inputArgs->ih.opcode;
sig_req->uc_unique = sig_inputArgs->ih.unique;
sig_req->uc_inSize = sizeof(struct coda_in_hdr);
* Not all architectures have sys_utime, so implement this in terms
* of sys_utimes.
*/
-asmlinkage long compat_sys_utime(char __user *filename, struct compat_utimbuf __user *t)
+asmlinkage long compat_sys_utime(const char __user *filename,
+ struct compat_utimbuf __user *t)
{
struct timespec tv[2];
return do_utimes(AT_FDCWD, filename, t ? tv : NULL, 0);
}
-asmlinkage long compat_sys_utimensat(unsigned int dfd, char __user *filename, struct compat_timespec __user *t, int flags)
+asmlinkage long compat_sys_utimensat(unsigned int dfd, const char __user *filename, struct compat_timespec __user *t, int flags)
{
struct timespec tv[2];
return do_utimes(dfd, filename, t ? tv : NULL, flags);
}
-asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename, struct compat_timeval __user *t)
+asmlinkage long compat_sys_futimesat(unsigned int dfd, const char __user *filename, struct compat_timeval __user *t)
{
struct timespec tv[2];
return do_utimes(dfd, filename, t ? tv : NULL, 0);
}
-asmlinkage long compat_sys_utimes(char __user *filename, struct compat_timeval __user *t)
+asmlinkage long compat_sys_utimes(const char __user *filename, struct compat_timeval __user *t)
{
return compat_sys_futimesat(AT_FDCWD, filename, t);
}
return err;
}
-asmlinkage long compat_sys_newstat(char __user * filename,
+asmlinkage long compat_sys_newstat(const char __user * filename,
struct compat_stat __user *statbuf)
{
struct kstat stat;
return cp_compat_stat(&stat, statbuf);
}
-asmlinkage long compat_sys_newlstat(char __user * filename,
+asmlinkage long compat_sys_newlstat(const char __user * filename,
struct compat_stat __user *statbuf)
{
struct kstat stat;
}
#ifndef __ARCH_WANT_STAT64
-asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user *filename,
+asmlinkage long compat_sys_newfstatat(unsigned int dfd,
+ const char __user *filename,
struct compat_stat __user *statbuf, int flag)
{
struct kstat stat;
error = user_path(pathname, &path);
if (!error) {
struct kstatfs tmp;
- error = vfs_statfs(path.dentry, &tmp);
+ error = vfs_statfs(&path, &tmp);
if (!error)
error = put_compat_statfs(buf, &tmp);
path_put(&path);
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs(file->f_path.dentry, &tmp);
+ error = vfs_statfs(&file->f_path, &tmp);
if (!error)
error = put_compat_statfs(buf, &tmp);
fput(file);
error = user_path(pathname, &path);
if (!error) {
struct kstatfs tmp;
- error = vfs_statfs(path.dentry, &tmp);
+ error = vfs_statfs(&path, &tmp);
if (!error)
error = put_compat_statfs64(buf, &tmp);
path_put(&path);
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs(file->f_path.dentry, &tmp);
+ error = vfs_statfs(&file->f_path, &tmp);
if (!error)
error = put_compat_statfs64(buf, &tmp);
fput(file);
sb = user_get_super(new_decode_dev(dev));
if (!sb)
return -EINVAL;
- err = vfs_statfs(sb->s_root, &sbuf);
+ err = statfs_by_dentry(sb->s_root, &sbuf);
drop_super(sb);
if (err)
return err;
#define NCPFS_NAME "ncpfs"
#define NFS4_NAME "nfs4"
-asmlinkage long compat_sys_mount(char __user * dev_name, char __user * dir_name,
- char __user * type, unsigned long flags,
- void __user * data)
+asmlinkage long compat_sys_mount(const char __user * dev_name,
+ const char __user * dir_name,
+ const char __user * type, unsigned long flags,
+ const void __user * data)
{
char *kernel_type;
unsigned long data_page;
if (iov != iovstack)
kfree(iov);
if ((ret + (type == READ)) > 0) {
- struct dentry *dentry = file->f_path.dentry;
if (type == READ)
- fsnotify_access(dentry);
+ fsnotify_access(file);
else
- fsnotify_modify(dentry);
+ fsnotify_modify(file);
}
return ret;
}
return err;
}
-static int rw_long(unsigned int fd, unsigned int cmd,
- compat_ulong_t __user *argp)
-{
- mm_segment_t old_fs = get_fs();
- int err;
- unsigned long val;
-
- if(get_user(val, argp))
- return -EFAULT;
- set_fs (KERNEL_DS);
- err = sys_ioctl(fd, cmd, (unsigned long)&val);
- set_fs (old_fs);
- if (!err && put_user(val, argp))
- return -EFAULT;
- return err;
-}
-
struct compat_video_event {
int32_t type;
compat_time_t timestamp;
return err;
}
-static int ioc_settimeout(unsigned int fd, unsigned int cmd,
- compat_ulong_t __user *argp)
-{
- return rw_long(fd, AUTOFS_IOC_SETTIMEOUT, argp);
-}
-
/* Bluetooth ioctls */
#define HCIUARTSETPROTO _IOW('U', 200, int)
#define HCIUARTGETPROTO _IOR('U', 201, int)
COMPATIBLE_IOCTL(TIOCGPTN)
COMPATIBLE_IOCTL(TIOCSPTLCK)
COMPATIBLE_IOCTL(TIOCSERGETLSR)
+COMPATIBLE_IOCTL(TIOCSIG)
#ifdef TCGETS2
COMPATIBLE_IOCTL(TCGETS2)
COMPATIBLE_IOCTL(TCSETS2)
COMPATIBLE_IOCTL(SOUND_MIXER_GETLEVELS)
COMPATIBLE_IOCTL(SOUND_MIXER_SETLEVELS)
COMPATIBLE_IOCTL(OSS_GETVERSION)
-/* AUTOFS */
-COMPATIBLE_IOCTL(AUTOFS_IOC_CATATONIC)
-COMPATIBLE_IOCTL(AUTOFS_IOC_PROTOVER)
-COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE)
-COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE_MULTI)
-COMPATIBLE_IOCTL(AUTOFS_IOC_PROTOSUBVER)
-COMPATIBLE_IOCTL(AUTOFS_IOC_ASKUMOUNT)
/* Raw devices */
COMPATIBLE_IOCTL(RAW_SETBIND)
COMPATIBLE_IOCTL(RAW_GETBIND)
case RAW_GETBIND:
return raw_ioctl(fd, cmd, argp);
#endif
-#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,unsigned int)
- case AUTOFS_IOC_SETTIMEOUT32:
- return ioc_settimeout(fd, cmd, argp);
/* One SMB ioctl needs translations. */
#define SMB_IOC_GETMOUNTUID_32 _IOR('u', 1, compat_uid_t)
case SMB_IOC_GETMOUNTUID_32:
case KDSKBMETA:
case KDSKBLED:
case KDSETLED:
- /* AUTOFS */
- case AUTOFS_IOC_READY:
- case AUTOFS_IOC_FAIL:
/* NBD */
case NBD_SET_SOCK:
case NBD_SET_BLKSIZE:
goto out_fput;
}
- if (!filp->f_op ||
- (!filp->f_op->ioctl && !filp->f_op->unlocked_ioctl))
+ if (!filp->f_op || !filp->f_op->unlocked_ioctl)
goto do_ioctl;
break;
}
#define CRAMINO(x) (((x)->offset && (x)->size)?(x)->offset<<2:1)
#define OFFSET(x) ((x)->i_ino)
-
-static int cramfs_iget5_test(struct inode *inode, void *opaque)
-{
- struct cramfs_inode *cramfs_inode = opaque;
- return inode->i_ino == CRAMINO(cramfs_inode) && inode->i_ino != 1;
-}
-
-static int cramfs_iget5_set(struct inode *inode, void *opaque)
+static void setup_inode(struct inode *inode, struct cramfs_inode * cramfs_inode)
{
- struct cramfs_inode *cramfs_inode = opaque;
- inode->i_ino = CRAMINO(cramfs_inode);
- return 0;
+ static struct timespec zerotime;
+ inode->i_mode = cramfs_inode->mode;
+ inode->i_uid = cramfs_inode->uid;
+ inode->i_size = cramfs_inode->size;
+ inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
+ inode->i_gid = cramfs_inode->gid;
+ /* Struct copy intentional */
+ inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
+ /* inode->i_nlink is left 1 - arguably wrong for directories,
+ but it's the best we can do without reading the directory
+ contents. 1 yields the right result in GNU find, even
+ without -noleaf option. */
+ if (S_ISREG(inode->i_mode)) {
+ inode->i_fop = &generic_ro_fops;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else if (S_ISDIR(inode->i_mode)) {
+ inode->i_op = &cramfs_dir_inode_operations;
+ inode->i_fop = &cramfs_directory_operations;
+ } else if (S_ISLNK(inode->i_mode)) {
+ inode->i_op = &page_symlink_inode_operations;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else {
+ init_special_inode(inode, inode->i_mode,
+ old_decode_dev(cramfs_inode->size));
+ }
}
static struct inode *get_cramfs_inode(struct super_block *sb,
struct cramfs_inode * cramfs_inode)
{
- struct inode *inode = iget5_locked(sb, CRAMINO(cramfs_inode),
- cramfs_iget5_test, cramfs_iget5_set,
- cramfs_inode);
- static struct timespec zerotime;
-
- if (inode && (inode->i_state & I_NEW)) {
- inode->i_mode = cramfs_inode->mode;
- inode->i_uid = cramfs_inode->uid;
- inode->i_size = cramfs_inode->size;
- inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
- inode->i_gid = cramfs_inode->gid;
- /* Struct copy intentional */
- inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
- /* inode->i_nlink is left 1 - arguably wrong for directories,
- but it's the best we can do without reading the directory
- contents. 1 yields the right result in GNU find, even
- without -noleaf option. */
- if (S_ISREG(inode->i_mode)) {
- inode->i_fop = &generic_ro_fops;
- inode->i_data.a_ops = &cramfs_aops;
- } else if (S_ISDIR(inode->i_mode)) {
- inode->i_op = &cramfs_dir_inode_operations;
- inode->i_fop = &cramfs_directory_operations;
- } else if (S_ISLNK(inode->i_mode)) {
- inode->i_op = &page_symlink_inode_operations;
- inode->i_data.a_ops = &cramfs_aops;
- } else {
- init_special_inode(inode, inode->i_mode,
- old_decode_dev(cramfs_inode->size));
+ struct inode *inode;
+ if (CRAMINO(cramfs_inode) == 1) {
+ inode = new_inode(sb);
+ if (inode) {
+ inode->i_ino = 1;
+ setup_inode(inode, cramfs_inode);
+ }
+ } else {
+ inode = iget_locked(sb, CRAMINO(cramfs_inode));
+ if (inode && (inode->i_state & I_NEW)) {
+ setup_inode(inode, cramfs_inode);
+ unlock_new_inode(inode);
}
- unlock_new_inode(inode);
}
return inode;
}
-static void cramfs_drop_inode(struct inode *inode)
-{
- if (inode->i_ino == 1)
- generic_delete_inode(inode);
- else
- generic_drop_inode(inode);
-}
-
/*
* We have our own block cache: don't fill up the buffer cache
* with the rom-image, because the way the filesystem is set
.put_super = cramfs_put_super,
.remount_fs = cramfs_remount,
.statfs = cramfs_statfs,
- .drop_inode = cramfs_drop_inode,
};
static int cramfs_get_sb(struct file_system_type *fs_type,
*/
static void prune_dcache(int count)
{
- struct super_block *sb, *n;
+ struct super_block *sb, *p = NULL;
int w_count;
int unused = dentry_stat.nr_unused;
int prune_ratio;
else
prune_ratio = unused / count;
spin_lock(&sb_lock);
- list_for_each_entry_safe(sb, n, &super_blocks, s_list) {
+ list_for_each_entry(sb, &super_blocks, s_list) {
if (list_empty(&sb->s_instances))
continue;
if (sb->s_nr_dentry_unused == 0)
up_read(&sb->s_umount);
}
spin_lock(&sb_lock);
- /* lock was dropped, must reset next */
- list_safe_reset_next(sb, n, s_list);
+ if (p)
+ __put_super(p);
count -= pruned;
- __put_super(sb);
+ p = sb;
/* more work left to do? */
if (count <= 0)
break;
}
+ if (p)
+ __put_super(p);
spin_unlock(&sb_lock);
spin_unlock(&dcache_lock);
}
* d_lookup - search for a dentry
* @parent: parent dentry
* @name: qstr of name we wish to find
+ * Returns: dentry, or NULL
*
- * Searches the children of the parent dentry for the name in question. If
- * the dentry is found its reference count is incremented and the dentry
- * is returned. The caller must use dput to free the entry when it has
- * finished using it. %NULL is returned on failure.
- *
- * __d_lookup is dcache_lock free. The hash list is protected using RCU.
- * Memory barriers are used while updating and doing lockless traversal.
- * To avoid races with d_move while rename is happening, d_lock is used.
- *
- * Overflows in memcmp(), while d_move, are avoided by keeping the length
- * and name pointer in one structure pointed by d_qstr.
- *
- * rcu_read_lock() and rcu_read_unlock() are used to disable preemption while
- * lookup is going on.
- *
- * The dentry unused LRU is not updated even if lookup finds the required dentry
- * in there. It is updated in places such as prune_dcache, shrink_dcache_sb,
- * select_parent and __dget_locked. This laziness saves lookup from dcache_lock
- * acquisition.
- *
- * d_lookup() is protected against the concurrent renames in some unrelated
- * directory using the seqlockt_t rename_lock.
+ * d_lookup searches the children of the parent dentry for the name in
+ * question. If the dentry is found its reference count is incremented and the
+ * dentry is returned. The caller must use dput to free the entry when it has
+ * finished using it. %NULL is returned if the dentry does not exist.
*/
-
struct dentry * d_lookup(struct dentry * parent, struct qstr * name)
{
struct dentry * dentry = NULL;
}
EXPORT_SYMBOL(d_lookup);
+/*
+ * __d_lookup - search for a dentry (racy)
+ * @parent: parent dentry
+ * @name: qstr of name we wish to find
+ * Returns: dentry, or NULL
+ *
+ * __d_lookup is like d_lookup, however it may (rarely) return a
+ * false-negative result due to unrelated rename activity.
+ *
+ * __d_lookup is slightly faster by avoiding rename_lock read seqlock,
+ * however it must be used carefully, eg. with a following d_lookup in
+ * the case of failure.
+ *
+ * __d_lookup callers must be commented.
+ */
struct dentry * __d_lookup(struct dentry * parent, struct qstr * name)
{
unsigned int len = name->len;
struct hlist_node *node;
struct dentry *dentry;
+ /*
+ * The hash list is protected using RCU.
+ *
+ * Take d_lock when comparing a candidate dentry, to avoid races
+ * with d_move().
+ *
+ * It is possible that concurrent renames can mess up our list
+ * walk here and result in missing our dentry, resulting in the
+ * false-negative result. d_lookup() protects against concurrent
+ * renames using rename_lock seqlock.
+ *
+ * See Documentation/vfs/dcache-locking.txt for more details.
+ */
rcu_read_lock();
hlist_for_each_entry_rcu(dentry, node, head, d_hash) {
/*
* Recheck the dentry after taking the lock - d_move may have
- * changed things. Don't bother checking the hash because we're
- * about to compare the whole name anyway.
+ * changed things. Don't bother checking the hash because
+ * we're about to compare the whole name anyway.
*/
if (dentry->d_parent != parent)
goto next;
}
/**
- * __d_path - return the path of a dentry
+ * Prepend path string to a buffer
+ *
* @path: the dentry/vfsmount to report
* @root: root vfsmnt/dentry (may be modified by this function)
- * @buffer: buffer to return value in
- * @buflen: buffer length
- *
- * Convert a dentry into an ASCII path name. If the entry has been deleted
- * the string " (deleted)" is appended. Note that this is ambiguous.
- *
- * Returns a pointer into the buffer or an error code if the
- * path was too long.
+ * @buffer: pointer to the end of the buffer
+ * @buflen: pointer to buffer length
*
- * "buflen" should be positive. Caller holds the dcache_lock.
+ * Caller holds the dcache_lock.
*
* If path is not reachable from the supplied root, then the value of
* root is changed (without modifying refcounts).
*/
-char *__d_path(const struct path *path, struct path *root,
- char *buffer, int buflen)
+static int prepend_path(const struct path *path, struct path *root,
+ char **buffer, int *buflen)
{
struct dentry *dentry = path->dentry;
struct vfsmount *vfsmnt = path->mnt;
- char *end = buffer + buflen;
- char *retval;
-
- spin_lock(&vfsmount_lock);
- prepend(&end, &buflen, "\0", 1);
- if (d_unlinked(dentry) &&
- (prepend(&end, &buflen, " (deleted)", 10) != 0))
- goto Elong;
+ bool slash = false;
+ int error = 0;
- if (buflen < 1)
- goto Elong;
- /* Get '/' right */
- retval = end-1;
- *retval = '/';
-
- for (;;) {
+ br_read_lock(vfsmount_lock);
+ while (dentry != root->dentry || vfsmnt != root->mnt) {
struct dentry * parent;
- if (dentry == root->dentry && vfsmnt == root->mnt)
- break;
if (dentry == vfsmnt->mnt_root || IS_ROOT(dentry)) {
/* Global root? */
if (vfsmnt->mnt_parent == vfsmnt) {
}
parent = dentry->d_parent;
prefetch(parent);
- if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) ||
- (prepend(&end, &buflen, "/", 1) != 0))
- goto Elong;
- retval = end;
+ error = prepend_name(buffer, buflen, &dentry->d_name);
+ if (!error)
+ error = prepend(buffer, buflen, "/", 1);
+ if (error)
+ break;
+
+ slash = true;
dentry = parent;
}
out:
- spin_unlock(&vfsmount_lock);
- return retval;
+ if (!error && !slash)
+ error = prepend(buffer, buflen, "/", 1);
+
+ br_read_unlock(vfsmount_lock);
+ return error;
global_root:
- retval += 1; /* hit the slash */
- if (prepend_name(&retval, &buflen, &dentry->d_name) != 0)
- goto Elong;
+ /*
+ * Filesystems needing to implement special "root names"
+ * should do so with ->d_dname()
+ */
+ if (IS_ROOT(dentry) &&
+ (dentry->d_name.len != 1 || dentry->d_name.name[0] != '/')) {
+ WARN(1, "Root dentry has weird name <%.*s>\n",
+ (int) dentry->d_name.len, dentry->d_name.name);
+ }
root->mnt = vfsmnt;
root->dentry = dentry;
goto out;
+}
-Elong:
- retval = ERR_PTR(-ENAMETOOLONG);
- goto out;
+/**
+ * __d_path - return the path of a dentry
+ * @path: the dentry/vfsmount to report
+ * @root: root vfsmnt/dentry (may be modified by this function)
+ * @buf: buffer to return value in
+ * @buflen: buffer length
+ *
+ * Convert a dentry into an ASCII path name.
+ *
+ * Returns a pointer into the buffer or an error code if the
+ * path was too long.
+ *
+ * "buflen" should be positive. Caller holds the dcache_lock.
+ *
+ * If path is not reachable from the supplied root, then the value of
+ * root is changed (without modifying refcounts).
+ */
+char *__d_path(const struct path *path, struct path *root,
+ char *buf, int buflen)
+{
+ char *res = buf + buflen;
+ int error;
+
+ prepend(&res, &buflen, "\0", 1);
+ error = prepend_path(path, root, &res, &buflen);
+ if (error)
+ return ERR_PTR(error);
+
+ return res;
+}
+
+/*
+ * same as __d_path but appends "(deleted)" for unlinked files.
+ */
+static int path_with_deleted(const struct path *path, struct path *root,
+ char **buf, int *buflen)
+{
+ prepend(buf, buflen, "\0", 1);
+ if (d_unlinked(path->dentry)) {
+ int error = prepend(buf, buflen, " (deleted)", 10);
+ if (error)
+ return error;
+ }
+
+ return prepend_path(path, root, buf, buflen);
+}
+
+static int prepend_unreachable(char **buffer, int *buflen)
+{
+ return prepend(buffer, buflen, "(unreachable)", 13);
}
/**
*/
char *d_path(const struct path *path, char *buf, int buflen)
{
- char *res;
+ char *res = buf + buflen;
struct path root;
struct path tmp;
+ int error;
/*
* We have various synthetic filesystems that never get mounted. On
if (path->dentry->d_op && path->dentry->d_op->d_dname)
return path->dentry->d_op->d_dname(path->dentry, buf, buflen);
- read_lock(¤t->fs->lock);
- root = current->fs->root;
- path_get(&root);
- read_unlock(¤t->fs->lock);
+ get_fs_root(current->fs, &root);
spin_lock(&dcache_lock);
tmp = root;
- res = __d_path(path, &tmp, buf, buflen);
+ error = path_with_deleted(path, &tmp, &res, &buflen);
+ if (error)
+ res = ERR_PTR(error);
spin_unlock(&dcache_lock);
path_put(&root);
return res;
}
EXPORT_SYMBOL(d_path);
+/**
+ * d_path_with_unreachable - return the path of a dentry
+ * @path: path to report
+ * @buf: buffer to return value in
+ * @buflen: buffer length
+ *
+ * The difference from d_path() is that this prepends "(unreachable)"
+ * to paths which are unreachable from the current process' root.
+ */
+char *d_path_with_unreachable(const struct path *path, char *buf, int buflen)
+{
+ char *res = buf + buflen;
+ struct path root;
+ struct path tmp;
+ int error;
+
+ if (path->dentry->d_op && path->dentry->d_op->d_dname)
+ return path->dentry->d_op->d_dname(path->dentry, buf, buflen);
+
+ get_fs_root(current->fs, &root);
+ spin_lock(&dcache_lock);
+ tmp = root;
+ error = path_with_deleted(path, &tmp, &res, &buflen);
+ if (!error && !path_equal(&tmp, &root))
+ error = prepend_unreachable(&res, &buflen);
+ spin_unlock(&dcache_lock);
+ path_put(&root);
+ if (error)
+ res = ERR_PTR(error);
+
+ return res;
+}
+
/*
* Helper function for dentry_operations.d_dname() members
*/
/*
* Write full pathname from the root of the filesystem into the buffer.
*/
-char *dentry_path(struct dentry *dentry, char *buf, int buflen)
+char *__dentry_path(struct dentry *dentry, char *buf, int buflen)
{
char *end = buf + buflen;
char *retval;
- spin_lock(&dcache_lock);
prepend(&end, &buflen, "\0", 1);
- if (d_unlinked(dentry) &&
- (prepend(&end, &buflen, "//deleted", 9) != 0))
- goto Elong;
if (buflen < 1)
goto Elong;
/* Get '/' right */
retval = end;
dentry = parent;
}
+ return retval;
+Elong:
+ return ERR_PTR(-ENAMETOOLONG);
+}
+EXPORT_SYMBOL(__dentry_path);
+
+char *dentry_path(struct dentry *dentry, char *buf, int buflen)
+{
+ char *p = NULL;
+ char *retval;
+
+ spin_lock(&dcache_lock);
+ if (d_unlinked(dentry)) {
+ p = buf + buflen;
+ if (prepend(&p, &buflen, "//deleted", 10) != 0)
+ goto Elong;
+ buflen++;
+ }
+ retval = __dentry_path(dentry, buf, buflen);
spin_unlock(&dcache_lock);
+ if (!IS_ERR(retval) && p)
+ *p = '/'; /* restore '/' overriden with '\0' */
return retval;
Elong:
spin_unlock(&dcache_lock);
if (!page)
return -ENOMEM;
- read_lock(¤t->fs->lock);
- pwd = current->fs->pwd;
- path_get(&pwd);
- root = current->fs->root;
- path_get(&root);
- read_unlock(¤t->fs->lock);
+ get_fs_root_and_pwd(current->fs, &root, &pwd);
error = -ENOENT;
spin_lock(&dcache_lock);
if (!d_unlinked(pwd.dentry)) {
unsigned long len;
struct path tmp = root;
- char * cwd;
+ char *cwd = page + PAGE_SIZE;
+ int buflen = PAGE_SIZE;
- cwd = __d_path(&pwd, &tmp, page, PAGE_SIZE);
+ prepend(&cwd, &buflen, "\0", 1);
+ error = prepend_path(&pwd, &tmp, &cwd, &buflen);
spin_unlock(&dcache_lock);
- error = PTR_ERR(cwd);
- if (IS_ERR(cwd))
+ if (error)
goto out;
+ /* Unreachable from current root */
+ if (!path_equal(&tmp, &root)) {
+ error = prepend_unreachable(&cwd, &buflen);
+ if (error)
+ goto out;
+ }
+
error = -ERANGE;
len = PAGE_SIZE + page - cwd;
if (len <= size) {
struct vfsmount *mnt = path1->mnt;
struct dentry *dentry = path1->dentry;
int res;
- spin_lock(&vfsmount_lock);
+
+ br_read_lock(vfsmount_lock);
if (mnt != path2->mnt) {
for (;;) {
if (mnt->mnt_parent == mnt) {
- spin_unlock(&vfsmount_lock);
+ br_read_unlock(vfsmount_lock);
return 0;
}
if (mnt->mnt_parent == path2->mnt)
dentry = mnt->mnt_mountpoint;
}
res = is_subdir(dentry, path2->dentry);
- spin_unlock(&vfsmount_lock);
+ br_read_unlock(vfsmount_lock);
return res;
}
EXPORT_SYMBOL(path_is_under);
return ret;
}
+/*
+ * This is a library function for use by filesystem drivers.
+ *
+ * The locking rules are governed by the flags parameter:
+ * - if the flags value contains DIO_LOCKING we use a fancy locking
+ * scheme for dumb filesystems.
+ * For writes this function is called under i_mutex and returns with
+ * i_mutex held, for reads, i_mutex is not held on entry, but it is
+ * taken and dropped again before returning.
+ * For reads and writes i_alloc_sem is taken in shared mode and released
+ * on I/O completion (which may happen asynchronously after returning to
+ * the caller).
+ *
+ * - if the flags value does NOT contain DIO_LOCKING we don't use any
+ * internal locking but rather rely on the filesystem to synchronize
+ * direct I/O reads/writes versus each other and truncate.
+ * For reads and writes both i_mutex and i_alloc_sem are not held on
+ * entry and are never taken.
+ */
ssize_t
-__blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb, struct inode *inode,
+__blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
struct block_device *bdev, const struct iovec *iov, loff_t offset,
unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
dio_submit_t submit_io, int flags)
out:
return retval;
}
-EXPORT_SYMBOL(__blockdev_direct_IO_newtrunc);
-
-/*
- * This is a library function for use by filesystem drivers.
- *
- * The locking rules are governed by the flags parameter:
- * - if the flags value contains DIO_LOCKING we use a fancy locking
- * scheme for dumb filesystems.
- * For writes this function is called under i_mutex and returns with
- * i_mutex held, for reads, i_mutex is not held on entry, but it is
- * taken and dropped again before returning.
- * For reads and writes i_alloc_sem is taken in shared mode and released
- * on I/O completion (which may happen asynchronously after returning to
- * the caller).
- *
- * - if the flags value does NOT contain DIO_LOCKING we don't use any
- * internal locking but rather rely on the filesystem to synchronize
- * direct I/O reads/writes versus each other and truncate.
- * For reads and writes both i_mutex and i_alloc_sem are not held on
- * entry and are never taken.
- */
-ssize_t
-__blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
- struct block_device *bdev, const struct iovec *iov, loff_t offset,
- unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
- dio_submit_t submit_io, int flags)
-{
- ssize_t retval;
-
- retval = __blockdev_direct_IO_newtrunc(rw, iocb, inode, bdev, iov,
- offset, nr_segs, get_block, end_io, submit_io, flags);
- /*
- * In case of error extending write may have instantiated a few
- * blocks outside i_size. Trim these off again for DIO_LOCKING.
- * NOTE: DIO_NO_LOCK/DIO_OWN_LOCK callers have to handle this in
- * their own manner. This is a further example of where the old
- * truncate sequence is inadequate.
- *
- * NOTE: filesystems with their own locking have to handle this
- * on their own.
- */
- if (flags & DIO_LOCKING) {
- if (unlikely((rw & WRITE) && retval < 0)) {
- loff_t isize = i_size_read(inode);
- loff_t end = offset + iov_length(iov, nr_segs);
-
- if (end > isize)
- vmtruncate(inode, isize);
- }
- }
-
- return retval;
-}
EXPORT_SYMBOL(__blockdev_direct_IO);
spin_lock(&inode_lock);
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
continue;
if (inode->i_mapping->nrpages == 0)
continue;
"the persistent file for the dentry with name "
"[%s]; rc = [%d]\n", __func__,
ecryptfs_dentry->d_name.name, rc);
- goto out;
+ goto out_free;
}
}
if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY)
rc = -EPERM;
printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs "
"file must hence be opened RO\n", __func__);
- goto out;
+ goto out_free;
}
ecryptfs_set_file_lower(
file, ecryptfs_inode_to_private(inode)->lower_file);
return rc;
}
-static int ecryptfs_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
+static long
+ecryptfs_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct file *lower_file = NULL;
+ long rc = -ENOTTY;
+
+ if (ecryptfs_file_to_private(file))
+ lower_file = ecryptfs_file_to_lower(file);
+ if (lower_file && lower_file->f_op && lower_file->f_op->unlocked_ioctl)
+ rc = lower_file->f_op->unlocked_ioctl(lower_file, cmd, arg);
+ return rc;
+}
+
+#ifdef CONFIG_COMPAT
+static long
+ecryptfs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct file *lower_file = NULL;
+ long rc = -ENOIOCTLCMD;
+
+ if (ecryptfs_file_to_private(file))
+ lower_file = ecryptfs_file_to_lower(file);
+ if (lower_file && lower_file->f_op && lower_file->f_op->compat_ioctl)
+ rc = lower_file->f_op->compat_ioctl(lower_file, cmd, arg);
+ return rc;
+}
+#endif
const struct file_operations ecryptfs_dir_fops = {
.readdir = ecryptfs_readdir,
- .ioctl = ecryptfs_ioctl,
+ .unlocked_ioctl = ecryptfs_unlocked_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = ecryptfs_compat_ioctl,
+#endif
.open = ecryptfs_open,
.flush = ecryptfs_flush,
.release = ecryptfs_release,
.write = do_sync_write,
.aio_write = generic_file_aio_write,
.readdir = ecryptfs_readdir,
- .ioctl = ecryptfs_ioctl,
+ .unlocked_ioctl = ecryptfs_unlocked_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = ecryptfs_compat_ioctl,
+#endif
.mmap = generic_file_mmap,
.open = ecryptfs_open,
.flush = ecryptfs_flush,
.fasync = ecryptfs_fasync,
.splice_read = generic_file_splice_read,
};
-
-static int
-ecryptfs_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int rc = 0;
- struct file *lower_file = NULL;
-
- if (ecryptfs_file_to_private(file))
- lower_file = ecryptfs_file_to_lower(file);
- if (lower_file && lower_file->f_op && lower_file->f_op->ioctl)
- rc = lower_file->f_op->ioctl(ecryptfs_inode_to_lower(inode),
- lower_file, cmd, arg);
- else
- rc = -ENOTTY;
- return rc;
-}
printk(KERN_ERR "%s: Out of memory whilst attempting "
"to allocate ecryptfs_dentry_info struct\n",
__func__);
- goto out_dput;
+ goto out_put;
}
ecryptfs_set_dentry_lower(ecryptfs_dentry, lower_dentry);
ecryptfs_set_dentry_lower_mnt(ecryptfs_dentry, lower_mnt);
out_free_kmem:
kmem_cache_free(ecryptfs_header_cache_2, page_virt);
goto out;
-out_dput:
+out_put:
dput(lower_dentry);
+ mntput(lower_mnt);
d_drop(ecryptfs_dentry);
out:
return rc;
}
+/**
+ * ecryptfs_new_lower_dentry
+ * @ename: The name of the new dentry.
+ * @lower_dir_dentry: Parent directory of the new dentry.
+ * @nd: nameidata from last lookup.
+ *
+ * Create a new dentry or get it from lower parent dir.
+ */
+static struct dentry *
+ecryptfs_new_lower_dentry(struct qstr *name, struct dentry *lower_dir_dentry,
+ struct nameidata *nd)
+{
+ struct dentry *new_dentry;
+ struct dentry *tmp;
+ struct inode *lower_dir_inode;
+
+ lower_dir_inode = lower_dir_dentry->d_inode;
+
+ tmp = d_alloc(lower_dir_dentry, name);
+ if (!tmp)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_lock(&lower_dir_inode->i_mutex);
+ new_dentry = lower_dir_inode->i_op->lookup(lower_dir_inode, tmp, nd);
+ mutex_unlock(&lower_dir_inode->i_mutex);
+
+ if (!new_dentry)
+ new_dentry = tmp;
+ else
+ dput(tmp);
+
+ return new_dentry;
+}
+
+
+/**
+ * ecryptfs_lookup_one_lower
+ * @ecryptfs_dentry: The eCryptfs dentry that we are looking up
+ * @lower_dir_dentry: lower parent directory
+ *
+ * Get the lower dentry from vfs. If lower dentry does not exist yet,
+ * create it.
+ */
+static struct dentry *
+ecryptfs_lookup_one_lower(struct dentry *ecryptfs_dentry,
+ struct dentry *lower_dir_dentry)
+{
+ struct nameidata nd;
+ struct vfsmount *lower_mnt;
+ struct qstr *name;
+ int err;
+
+ name = &ecryptfs_dentry->d_name;
+ lower_mnt = mntget(ecryptfs_dentry_to_lower_mnt(
+ ecryptfs_dentry->d_parent));
+ err = vfs_path_lookup(lower_dir_dentry, lower_mnt, name->name , 0, &nd);
+ mntput(lower_mnt);
+
+ if (!err) {
+ /* we dont need the mount */
+ mntput(nd.path.mnt);
+ return nd.path.dentry;
+ }
+ if (err != -ENOENT)
+ return ERR_PTR(err);
+
+ /* create a new lower dentry */
+ return ecryptfs_new_lower_dentry(name, lower_dir_dentry, &nd);
+}
+
/**
* ecryptfs_lookup
* @ecryptfs_dir_inode: The eCryptfs directory inode
goto out_d_drop;
}
lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent);
- mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
- lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name,
- lower_dir_dentry,
- ecryptfs_dentry->d_name.len);
- mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
+
+ lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
+ lower_dir_dentry);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
- ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
+ ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
"[%d] on lower_dentry = [%s]\n", __func__, rc,
encrypted_and_encoded_name);
goto out_d_drop;
"filename; rc = [%d]\n", __func__, rc);
goto out_d_drop;
}
- mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
- lower_dentry = lookup_one_len(encrypted_and_encoded_name,
- lower_dir_dentry,
- encrypted_and_encoded_name_size - 1);
- mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
+ lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
+ lower_dir_dentry);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
- ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
+ ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
"[%d] on lower_dentry = [%s]\n", __func__, rc,
encrypted_and_encoded_name);
goto out_d_drop;
size_t num_zeros = (PAGE_CACHE_SIZE
- (ia->ia_size & ~PAGE_CACHE_MASK));
+
+ /*
+ * XXX(truncate) this should really happen at the begginning
+ * of ->setattr. But the code is too messy to that as part
+ * of a larger patch. ecryptfs is also totally missing out
+ * on the inode_change_ok check at the beginning of
+ * ->setattr while would include this.
+ */
+ rc = inode_newsize_ok(inode, ia->ia_size);
+ if (rc)
+ goto out;
+
if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = simple_setsize(inode, ia->ia_size);
- if (rc)
- goto out;
+ truncate_setsize(inode, ia->ia_size);
lower_ia->ia_size = ia->ia_size;
lower_ia->ia_valid |= ATTR_SIZE;
goto out;
goto out;
}
}
- simple_setsize(inode, ia->ia_size);
+ truncate_setsize(inode, ia->ia_size);
rc = ecryptfs_write_inode_size_to_metadata(inode);
if (rc) {
printk(KERN_ERR "Problem with "
struct user_namespace *user_ns, struct pid *pid,
u32 seq)
{
- struct ecryptfs_daemon *daemon;
+ struct ecryptfs_daemon *uninitialized_var(daemon);
struct ecryptfs_msg_ctx *msg_ctx;
size_t msg_size;
struct nsproxy *nsproxy;
*/
static int ecryptfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
- return vfs_statfs(ecryptfs_dentry_to_lower(dentry), buf);
+ struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+
+ if (!lower_dentry->d_sb->s_op->statfs)
+ return -ENOSYS;
+ return lower_dentry->d_sb->s_op->statfs(lower_dentry, buf);
}
/**
- * ecryptfs_clear_inode
+ * ecryptfs_evict_inode
* @inode - The ecryptfs inode
*
* Called by iput() when the inode reference count reached zero
* on the inode free list. We use this to drop out reference to the
* lower inode.
*/
-static void ecryptfs_clear_inode(struct inode *inode)
+static void ecryptfs_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
iput(ecryptfs_inode_to_lower(inode));
}
.drop_inode = generic_delete_inode,
.statfs = ecryptfs_statfs,
.remount_fs = NULL,
- .clear_inode = ecryptfs_clear_inode,
+ .evict_inode = ecryptfs_evict_inode,
.show_options = ecryptfs_show_options
};
if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
goto exit;
- fsnotify_open(file->f_path.dentry);
+ fsnotify_open(file);
error = -ENOEXEC;
if(file->f_op) {
/*
* count() counts the number of strings in array ARGV.
*/
-static int count(char __user * __user * argv, int max)
+static int count(const char __user * const __user * argv, int max)
{
int i = 0;
if (argv != NULL) {
for (;;) {
- char __user * p;
+ const char __user * p;
if (get_user(p, argv))
return -EFAULT;
* processes's memory to the new process's stack. The call to get_user_pages()
* ensures the destination page is created and not swapped out.
*/
-static int copy_strings(int argc, char __user * __user * argv,
+static int copy_strings(int argc, const char __user *const __user *argv,
struct linux_binprm *bprm)
{
struct page *kmapped_page = NULL;
int ret;
while (argc-- > 0) {
- char __user *str;
+ const char __user *str;
int len;
unsigned long pos;
/*
* Like copy_strings, but get argv and its values from kernel memory.
*/
-int copy_strings_kernel(int argc,char ** argv, struct linux_binprm *bprm)
+int copy_strings_kernel(int argc, const char *const *argv,
+ struct linux_binprm *bprm)
{
int r;
mm_segment_t oldfs = get_fs();
set_fs(KERNEL_DS);
- r = copy_strings(argc, (char __user * __user *)argv, bprm);
+ r = copy_strings(argc, (const char __user *const __user *)argv, bprm);
set_fs(oldfs);
return r;
}
if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
goto exit;
- fsnotify_open(file->f_path.dentry);
+ fsnotify_open(file);
err = deny_write_access(file);
if (err)
void setup_new_exec(struct linux_binprm * bprm)
{
int i, ch;
- char * name;
+ const char *name;
char tcomm[sizeof(current->comm)];
arch_pick_mmap_layout(current->mm);
bprm->unsafe = tracehook_unsafe_exec(p);
n_fs = 1;
- write_lock(&p->fs->lock);
+ spin_lock(&p->fs->lock);
rcu_read_lock();
for (t = next_thread(p); t != p; t = next_thread(t)) {
if (t->fs == p->fs)
res = 1;
}
}
- write_unlock(&p->fs->lock);
+ spin_unlock(&p->fs->lock);
return res;
}
/*
* sys_execve() executes a new program.
*/
-int do_execve(char * filename,
- char __user *__user *argv,
- char __user *__user *envp,
+int do_execve(const char * filename,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp,
struct pt_regs * regs)
{
struct linux_binprm *bprm;
}
/* inode.c */
-void exofs_truncate(struct inode *inode);
int exofs_setattr(struct dentry *, struct iattr *);
int exofs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
extern struct inode *exofs_iget(struct super_block *, unsigned long);
struct inode *exofs_new_inode(struct inode *, int);
extern int exofs_write_inode(struct inode *, struct writeback_control *wbc);
-extern void exofs_delete_inode(struct inode *);
+extern void exofs_evict_inode(struct inode *);
/* dir.c: */
int exofs_add_link(struct dentry *, struct inode *);
* along with exofs; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
-#include <linux/buffer_head.h>
-
#include "exofs.h"
static int exofs_release_file(struct inode *inode, struct file *filp)
return 0;
}
+/* exofs_file_fsync - flush the inode to disk
+ *
+ * Note, in exofs all metadata is written as part of inode, regardless.
+ * The writeout is synchronous
+ */
static int exofs_file_fsync(struct file *filp, int datasync)
{
int ret;
- struct address_space *mapping = filp->f_mapping;
- struct inode *inode = mapping->host;
+ struct inode *inode = filp->f_mapping->host;
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_ALL,
+ .nr_to_write = 0, /* metadata-only; caller takes care of data */
+ };
struct super_block *sb;
- ret = filemap_write_and_wait(mapping);
- if (ret)
- return ret;
+ if (!(inode->i_state & I_DIRTY))
+ return 0;
+ if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
+ return 0;
- /* sync the inode attributes */
- ret = write_inode_now(inode, 1);
+ ret = sync_inode(inode, &wbc);
/* This is a good place to write the sb */
/* TODO: Sechedule an sb-sync on create */
static int exofs_flush(struct file *file, fl_owner_t id)
{
- exofs_file_fsync(file, 1);
+ int ret = vfs_fsync(file, 0);
/* TODO: Flush the OSD target */
- return 0;
+ return ret;
}
const struct file_operations exofs_file_operations = {
};
const struct inode_operations exofs_file_inode_operations = {
- .truncate = exofs_truncate,
.setattr = exofs_setattr,
};
*/
#include <linux/slab.h>
-#include <linux/writeback.h>
-#include <linux/buffer_head.h>
-#include <scsi/scsi_device.h>
#include "exofs.h"
return write_exec(&pcol);
}
+/* i_mutex held using inode->i_size directly */
+static void _write_failed(struct inode *inode, loff_t to)
+{
+ if (to > inode->i_size)
+ truncate_pagecache(inode, to, inode->i_size);
+}
+
int exofs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
fsdata);
if (ret) {
EXOFS_DBGMSG("simple_write_begin faild\n");
- return ret;
+ goto out;
}
page = *pagep;
EXOFS_DBGMSG("__readpage_filler faild\n");
}
}
+out:
+ if (unlikely(ret))
+ _write_failed(mapping->host, pos + len);
return ret;
}
int ret;
ret = simple_write_end(file, mapping,pos, len, copied, page, fsdata);
+ if (unlikely(ret))
+ _write_failed(inode, pos + len);
+
+ /* TODO: once simple_write_end marks inode dirty remove */
if (i_size != inode->i_size)
mark_inode_dirty(inode);
return ret;
{
EXOFS_DBGMSG("page 0x%lx\n", page->index);
WARN_ON(1);
- return try_to_free_buffers(page);
+ return 0;
}
static void exofs_invalidatepage(struct page *page, unsigned long offset)
{
- EXOFS_DBGMSG("page_has_buffers=>%d\n", page_has_buffers(page));
+ EXOFS_DBGMSG("page 0x%lx offset 0x%lx\n", page->index, offset);
WARN_ON(1);
-
- block_invalidatepage(page, offset);
}
const struct address_space_operations exofs_aops = {
return S_ISLNK(inode->i_mode) && (oi->i_data[0] != 0);
}
-/*
- * get_block_t - Fill in a buffer_head
- * An OSD takes care of block allocation so we just fake an allocation by
- * putting in the inode's sector_t in the buffer_head.
- * TODO: What about the case of create==0 and @iblock does not exist in the
- * object?
- */
-static int exofs_get_block(struct inode *inode, sector_t iblock,
- struct buffer_head *bh_result, int create)
-{
- map_bh(bh_result, inode->i_sb, iblock);
- return 0;
-}
-
const struct osd_attr g_attr_logical_length = ATTR_DEF(
OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_LOGICAL_LENGTH, 8);
-static int _do_truncate(struct inode *inode)
+static int _do_truncate(struct inode *inode, loff_t newsize)
{
struct exofs_i_info *oi = exofs_i(inode);
- loff_t isize = i_size_read(inode);
int ret;
inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- nobh_truncate_page(inode->i_mapping, isize, exofs_get_block);
+ ret = exofs_oi_truncate(oi, (u64)newsize);
+ if (likely(!ret))
+ truncate_setsize(inode, newsize);
- ret = exofs_oi_truncate(oi, (u64)isize);
- EXOFS_DBGMSG("(0x%lx) size=0x%llx\n", inode->i_ino, isize);
+ EXOFS_DBGMSG("(0x%lx) size=0x%llx ret=>%d\n",
+ inode->i_ino, newsize, ret);
return ret;
}
/*
- * Truncate a file to the specified size - all we have to do is set the size
- * attribute. We make sure the object exists first.
- */
-void exofs_truncate(struct inode *inode)
-{
- struct exofs_i_info *oi = exofs_i(inode);
- int ret;
-
- if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode)
- || S_ISLNK(inode->i_mode)))
- return;
- if (exofs_inode_is_fast_symlink(inode))
- return;
- if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
- return;
-
- /* if we are about to truncate an object, and it hasn't been
- * created yet, wait
- */
- if (unlikely(wait_obj_created(oi)))
- goto fail;
-
- ret = _do_truncate(inode);
- if (ret)
- goto fail;
-
-out:
- mark_inode_dirty(inode);
- return;
-fail:
- make_bad_inode(inode);
- goto out;
-}
-
-/*
- * Set inode attributes - just call generic functions.
+ * Set inode attributes - update size attribute on OSD if needed,
+ * otherwise just call generic functions.
*/
int exofs_setattr(struct dentry *dentry, struct iattr *iattr)
{
struct inode *inode = dentry->d_inode;
int error;
+ /* if we are about to modify an object, and it hasn't been
+ * created yet, wait
+ */
+ error = wait_obj_created(exofs_i(inode));
+ if (unlikely(error))
+ return error;
+
error = inode_change_ok(inode, iattr);
- if (error)
+ if (unlikely(error))
return error;
- error = inode_setattr(inode, iattr);
- return error;
+ if ((iattr->ia_valid & ATTR_SIZE) &&
+ iattr->ia_size != i_size_read(inode)) {
+ error = _do_truncate(inode, iattr->ia_size);
+ if (unlikely(error))
+ return error;
+ }
+
+ setattr_copy(inode, iattr);
+ mark_inode_dirty(inode);
+ return 0;
}
static const struct osd_attr g_attr_inode_file_layout = ATTR_DEF(
* from the OSD here. We make sure the object was created before we try and
* delete it.
*/
-void exofs_delete_inode(struct inode *inode)
+void exofs_evict_inode(struct inode *inode)
{
struct exofs_i_info *oi = exofs_i(inode);
struct super_block *sb = inode->i_sb;
truncate_inode_pages(&inode->i_data, 0);
- if (is_bad_inode(inode))
+ /* TODO: should do better here */
+ if (inode->i_nlink || is_bad_inode(inode))
goto no_delete;
- mark_inode_dirty(inode);
- exofs_update_inode(inode, inode_needs_sync(inode));
-
inode->i_size = 0;
- if (inode->i_blocks)
- exofs_truncate(inode);
+ end_writeback(inode);
- clear_inode(inode);
+ /* if we are deleting an obj that hasn't been created yet, wait */
+ if (!obj_created(oi)) {
+ BUG_ON(!obj_2bcreated(oi));
+ wait_event(oi->i_wq, obj_created(oi));
+ /* ignore the error attempt a remove anyway */
+ }
+ /* Now Remove the OSD objects */
ret = exofs_get_io_state(&sbi->layout, &ios);
if (unlikely(ret)) {
EXOFS_ERR("%s: exofs_get_io_state failed\n", __func__);
return;
}
- /* if we are deleting an obj that hasn't been created yet, wait */
- if (!obj_created(oi)) {
- BUG_ON(!obj_2bcreated(oi));
- wait_event(oi->i_wq, obj_created(oi));
- }
-
ios->obj.id = exofs_oi_objno(oi);
ios->done = delete_done;
ios->private = sbi;
return;
no_delete:
- clear_inode(inode);
+ end_writeback(inode);
}
struct _striping_info {
u64 obj_offset;
u64 group_length;
- u64 total_group_length;
- u64 Major;
unsigned dev;
unsigned unit_off;
};
(M * group_depth * stripe_unit);
si->group_length = T - H;
- si->total_group_length = T;
- si->Major = M;
}
static int _add_stripe_unit(struct exofs_io_state *ios, unsigned *cur_pg,
}
static int _prepare_one_group(struct exofs_io_state *ios, u64 length,
- struct _striping_info *si, unsigned first_comp)
+ struct _striping_info *si)
{
unsigned stripe_unit = ios->layout->stripe_unit;
unsigned mirrors_p1 = ios->layout->mirrors_p1;
unsigned devs_in_group = ios->layout->group_width * mirrors_p1;
unsigned dev = si->dev;
unsigned first_dev = dev - (dev % devs_in_group);
- unsigned comp = first_comp + (dev - first_dev);
unsigned max_comp = ios->numdevs ? ios->numdevs - mirrors_p1 : 0;
unsigned cur_pg = ios->pages_consumed;
int ret = 0;
while (length) {
- struct exofs_per_dev_state *per_dev = &ios->per_dev[comp];
+ struct exofs_per_dev_state *per_dev = &ios->per_dev[dev];
unsigned cur_len, page_off = 0;
if (!per_dev->length) {
cur_len = stripe_unit;
}
- if (max_comp < comp)
- max_comp = comp;
-
- dev += mirrors_p1;
- dev = (dev % devs_in_group) + first_dev;
+ if (max_comp < dev)
+ max_comp = dev;
} else {
cur_len = stripe_unit;
}
if (unlikely(ret))
goto out;
- comp += mirrors_p1;
- comp = (comp % devs_in_group) + first_comp;
+ dev += mirrors_p1;
+ dev = (dev % devs_in_group) + first_dev;
length -= cur_len;
}
static int _prepare_for_striping(struct exofs_io_state *ios)
{
u64 length = ios->length;
+ u64 offset = ios->offset;
struct _striping_info si;
- unsigned devs_in_group = ios->layout->group_width *
- ios->layout->mirrors_p1;
- unsigned first_comp = 0;
int ret = 0;
- _calc_stripe_info(ios, ios->offset, &si);
-
if (!ios->pages) {
if (ios->kern_buff) {
struct exofs_per_dev_state *per_dev = &ios->per_dev[0];
+ _calc_stripe_info(ios, ios->offset, &si);
per_dev->offset = si.obj_offset;
per_dev->dev = si.dev;
}
while (length) {
+ _calc_stripe_info(ios, offset, &si);
+
if (length < si.group_length)
si.group_length = length;
- ret = _prepare_one_group(ios, si.group_length, &si, first_comp);
+ ret = _prepare_one_group(ios, si.group_length, &si);
if (unlikely(ret))
goto out;
+ offset += si.group_length;
length -= si.group_length;
-
- si.group_length = si.total_group_length;
- si.unit_off = 0;
- ++si.Major;
- si.obj_offset = si.Major * ios->layout->stripe_unit *
- ios->layout->group_depth;
-
- si.dev = (si.dev - (si.dev % devs_in_group)) + devs_in_group;
- si.dev %= ios->layout->s_numdevs;
-
- first_comp += devs_in_group;
- first_comp %= ios->layout->s_numdevs;
}
out:
} else {
bio = master_dev->bio;
/* FIXME: bio_set_dir() */
- bio->bi_rw |= (1 << BIO_RW);
+ bio->bi_rw |= REQ_WRITE;
}
osd_req_write(or, &ios->obj, per_dev->offset, bio,
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/parser.h>
#include <linux/vfs.h>
.alloc_inode = exofs_alloc_inode,
.destroy_inode = exofs_destroy_inode,
.write_inode = exofs_write_inode,
- .delete_inode = exofs_delete_inode,
+ .evict_inode = exofs_evict_inode,
.put_super = exofs_put_super,
.write_super = exofs_write_super,
.sync_fs = exofs_sync_fs,
error_return:
brelse(bitmap_bh);
release_blocks(sb, freed);
- dquot_free_block(inode, freed);
+ dquot_free_block_nodirty(inode, freed);
}
/**
*errp = 0;
brelse(bitmap_bh);
- dquot_free_block(inode, *count-num);
+ dquot_free_block_nodirty(inode, *count-num);
+ mark_inode_dirty(inode);
*count = num;
return ret_block;
/*
* Undo the block allocation
*/
- if (!performed_allocation)
- dquot_free_block(inode, *count);
+ if (!performed_allocation) {
+ dquot_free_block_nodirty(inode, *count);
+ mark_inode_dirty(inode);
+ }
brelse(bitmap_bh);
return 0;
}
return res;
}
+static int ext2_prepare_chunk(struct page *page, loff_t pos, unsigned len)
+{
+ return __block_write_begin(page, pos, len, ext2_get_block);
+}
+
/* Releases the page */
void ext2_set_link(struct inode *dir, struct ext2_dir_entry_2 *de,
struct page *page, struct inode *inode, int update_times)
int err;
lock_page(page);
- err = __ext2_write_begin(NULL, page->mapping, pos, len,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = ext2_prepare_chunk(page, pos, len);
BUG_ON(err);
de->inode = cpu_to_le32(inode->i_ino);
ext2_set_de_type(de, inode);
got_it:
pos = page_offset(page) +
(char*)de - (char*)page_address(page);
- err = __ext2_write_begin(NULL, page->mapping, pos, rec_len, 0,
- &page, NULL);
+ err = ext2_prepare_chunk(page, pos, rec_len);
if (err)
goto out_unlock;
if (de->inode) {
*/
int ext2_delete_entry (struct ext2_dir_entry_2 * dir, struct page * page )
{
- struct address_space *mapping = page->mapping;
- struct inode *inode = mapping->host;
+ struct inode *inode = page->mapping->host;
char *kaddr = page_address(page);
unsigned from = ((char*)dir - kaddr) & ~(ext2_chunk_size(inode)-1);
unsigned to = ((char *)dir - kaddr) +
from = (char*)pde - (char*)page_address(page);
pos = page_offset(page) + from;
lock_page(page);
- err = __ext2_write_begin(NULL, page->mapping, pos, to - from, 0,
- &page, NULL);
+ err = ext2_prepare_chunk(page, pos, to - from);
BUG_ON(err);
if (pde)
pde->rec_len = ext2_rec_len_to_disk(to - from);
*/
int ext2_make_empty(struct inode *inode, struct inode *parent)
{
- struct address_space *mapping = inode->i_mapping;
- struct page *page = grab_cache_page(mapping, 0);
+ struct page *page = grab_cache_page(inode->i_mapping, 0);
unsigned chunk_size = ext2_chunk_size(inode);
struct ext2_dir_entry_2 * de;
int err;
if (!page)
return -ENOMEM;
- err = __ext2_write_begin(NULL, page->mapping, 0, chunk_size, 0,
- &page, NULL);
+ err = ext2_prepare_chunk(page, 0, chunk_size);
if (err) {
unlock_page(page);
goto fail;
/* inode.c */
extern struct inode *ext2_iget (struct super_block *, unsigned long);
extern int ext2_write_inode (struct inode *, struct writeback_control *);
-extern void ext2_delete_inode (struct inode *);
+extern void ext2_evict_inode(struct inode *);
extern int ext2_sync_inode (struct inode *);
extern int ext2_get_block(struct inode *, sector_t, struct buffer_head *, int);
extern int ext2_setattr (struct dentry *, struct iattr *);
extern void ext2_get_inode_flags(struct ext2_inode_info *);
extern int ext2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
u64 start, u64 len);
-int __ext2_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata);
/* ioctl.c */
extern long ext2_ioctl(struct file *, unsigned int, unsigned long);
* Note: we must free any quota before locking the superblock,
* as writing the quota to disk may need the lock as well.
*/
- if (!is_bad_inode(inode)) {
- /* Quota is already initialized in iput() */
- ext2_xattr_delete_inode(inode);
- dquot_free_inode(inode);
- dquot_drop(inode);
- }
+ /* Quota is already initialized in iput() */
+ ext2_xattr_delete_inode(inode);
+ dquot_free_inode(inode);
+ dquot_drop(inode);
es = EXT2_SB(sb)->s_es;
is_directory = S_ISDIR(inode->i_mode);
- /* Do this BEFORE marking the inode not in use or returning an error */
- clear_inode (inode);
-
if (ino < EXT2_FIRST_INO(sb) ||
ino > le32_to_cpu(es->s_inodes_count)) {
ext2_error (sb, "ext2_free_inode",
/*
* Called at the last iput() if i_nlink is zero.
*/
-void ext2_delete_inode (struct inode * inode)
+void ext2_evict_inode(struct inode * inode)
{
- if (!is_bad_inode(inode))
+ struct ext2_block_alloc_info *rsv;
+ int want_delete = 0;
+
+ if (!inode->i_nlink && !is_bad_inode(inode)) {
+ want_delete = 1;
dquot_initialize(inode);
+ } else {
+ dquot_drop(inode);
+ }
+
truncate_inode_pages(&inode->i_data, 0);
- if (is_bad_inode(inode))
- goto no_delete;
- EXT2_I(inode)->i_dtime = get_seconds();
- mark_inode_dirty(inode);
- __ext2_write_inode(inode, inode_needs_sync(inode));
+ if (want_delete) {
+ /* set dtime */
+ EXT2_I(inode)->i_dtime = get_seconds();
+ mark_inode_dirty(inode);
+ __ext2_write_inode(inode, inode_needs_sync(inode));
+ /* truncate to 0 */
+ inode->i_size = 0;
+ if (inode->i_blocks)
+ ext2_truncate_blocks(inode, 0);
+ }
- inode->i_size = 0;
- if (inode->i_blocks)
- ext2_truncate_blocks(inode, 0);
- ext2_free_inode (inode);
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
- return;
-no_delete:
- clear_inode(inode); /* We must guarantee clearing of inode... */
+ ext2_discard_reservation(inode);
+ rsv = EXT2_I(inode)->i_block_alloc_info;
+ EXT2_I(inode)->i_block_alloc_info = NULL;
+ if (unlikely(rsv))
+ kfree(rsv);
+
+ if (want_delete)
+ ext2_free_inode(inode);
}
typedef struct {
failed_out:
for (i = 0; i <index; i++)
ext2_free_blocks(inode, new_blocks[i], 1);
+ if (index)
+ mark_inode_dirty(inode);
return ret;
}
return mpage_readpages(mapping, pages, nr_pages, ext2_get_block);
}
-int __ext2_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata)
-{
- return block_write_begin_newtrunc(file, mapping, pos, len, flags,
- pagep, fsdata, ext2_get_block);
-}
-
static int
ext2_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
{
int ret;
- *pagep = NULL;
- ret = __ext2_write_begin(file, mapping, pos, len, flags, pagep, fsdata);
+ ret = block_write_begin(mapping, pos, len, flags, pagep,
+ ext2_get_block);
if (ret < 0)
ext2_write_failed(mapping, pos + len);
return ret;
{
int ret;
- /*
- * Dir-in-pagecache still uses ext2_write_begin. Would have to rework
- * directory handling code to pass around offsets rather than struct
- * pages in order to make this work easily.
- */
- ret = nobh_write_begin_newtrunc(file, mapping, pos, len, flags, pagep,
- fsdata, ext2_get_block);
+ ret = nobh_write_begin(mapping, pos, len, flags, pagep, fsdata,
+ ext2_get_block);
if (ret < 0)
ext2_write_failed(mapping, pos + len);
return ret;
struct inode *inode = mapping->host;
ssize_t ret;
- ret = blockdev_direct_IO_newtrunc(rw, iocb, inode, inode->i_sb->s_bdev,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev,
iov, offset, nr_segs, ext2_get_block, NULL);
if (ret < 0 && (rw & WRITE))
ext2_write_failed(mapping, offset + iov_length(iov, nr_segs));
else if (block_to_free == nr - count)
count++;
else {
- mark_inode_dirty(inode);
ext2_free_blocks (inode, block_to_free, count);
+ mark_inode_dirty(inode);
free_this:
block_to_free = nr;
count = 1;
}
}
if (count > 0) {
- mark_inode_dirty(inode);
ext2_free_blocks (inode, block_to_free, count);
+ mark_inode_dirty(inode);
}
}
__ext2_truncate_blocks(inode, offset);
}
-int ext2_setsize(struct inode *inode, loff_t newsize)
+static int ext2_setsize(struct inode *inode, loff_t newsize)
{
- loff_t oldsize;
int error;
- error = inode_newsize_ok(inode, newsize);
- if (error)
- return error;
-
if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
S_ISLNK(inode->i_mode)))
return -EINVAL;
if (error)
return error;
- oldsize = inode->i_size;
- i_size_write(inode, newsize);
- truncate_pagecache(inode, oldsize, newsize);
-
+ truncate_setsize(inode, newsize);
__ext2_truncate_blocks(inode, newsize);
inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
if (error)
return error;
}
- generic_setattr(inode, iattr);
+ setattr_copy(inode, iattr);
if (iattr->ia_valid & ATTR_MODE)
error = ext2_acl_chmod(inode);
mark_inode_dirty(inode);
kmem_cache_destroy(ext2_inode_cachep);
}
-static void ext2_clear_inode(struct inode *inode)
-{
- struct ext2_block_alloc_info *rsv = EXT2_I(inode)->i_block_alloc_info;
-
- dquot_drop(inode);
- ext2_discard_reservation(inode);
- EXT2_I(inode)->i_block_alloc_info = NULL;
- if (unlikely(rsv))
- kfree(rsv);
-}
-
static int ext2_show_options(struct seq_file *seq, struct vfsmount *vfs)
{
struct super_block *sb = vfs->mnt_sb;
.alloc_inode = ext2_alloc_inode,
.destroy_inode = ext2_destroy_inode,
.write_inode = ext2_write_inode,
- .delete_inode = ext2_delete_inode,
+ .evict_inode = ext2_evict_inode,
.put_super = ext2_put_super,
.write_super = ext2_write_super,
.sync_fs = ext2_sync_fs,
.statfs = ext2_statfs,
.remount_fs = ext2_remount,
- .clear_inode = ext2_clear_inode,
.show_options = ext2_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext2_quota_read,
new_bh = sb_getblk(sb, block);
if (!new_bh) {
ext2_free_blocks(inode, block, 1);
+ mark_inode_dirty(inode);
error = -EIO;
goto cleanup;
}
* written (only some dirty data were not) so we just proceed
* as if nothing happened and cleanup the unused block */
if (error && error != -ENOSPC) {
- if (new_bh && new_bh != old_bh)
- dquot_free_block(inode, 1);
+ if (new_bh && new_bh != old_bh) {
+ dquot_free_block_nodirty(inode, 1);
+ mark_inode_dirty(inode);
+ }
goto cleanup;
}
} else
mb_cache_entry_free(ce);
ea_bdebug(old_bh, "freeing");
ext2_free_blocks(inode, old_bh->b_blocknr, 1);
+ mark_inode_dirty(inode);
/* We let our caller release old_bh, so we
* need to duplicate the buffer before. */
get_bh(old_bh);
le32_add_cpu(&HDR(old_bh)->h_refcount, -1);
if (ce)
mb_cache_entry_release(ce);
- dquot_free_block(inode, 1);
+ dquot_free_block_nodirty(inode, 1);
+ mark_inode_dirty(inode);
mark_buffer_dirty(old_bh);
ea_bdebug(old_bh, "refcount now=%d",
le32_to_cpu(HDR(old_bh)->h_refcount));
mark_buffer_dirty(bh);
if (IS_SYNC(inode))
sync_dirty_buffer(bh);
- dquot_free_block(inode, 1);
+ dquot_free_block_nodirty(inode, 1);
}
EXT2_I(inode)->i_file_acl = 0;
ce = mb_cache_entry_alloc(ext2_xattr_cache, GFP_NOFS);
if (!ce)
return -ENOMEM;
- error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, &hash);
+ error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, hash);
if (error) {
mb_cache_entry_free(ce);
if (error == -EBUSY) {
return NULL; /* never share */
ea_idebug(inode, "looking for cached blocks [%x]", (int)hash);
again:
- ce = mb_cache_entry_find_first(ext2_xattr_cache, 0,
- inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_first(ext2_xattr_cache, inode->i_sb->s_bdev,
+ hash);
while (ce) {
struct buffer_head *bh;
unlock_buffer(bh);
brelse(bh);
}
- ce = mb_cache_entry_find_next(ce, 0, inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_next(ce, inode->i_sb->s_bdev, hash);
}
return NULL;
}
int __init
init_ext2_xattr(void)
{
- ext2_xattr_cache = mb_cache_create("ext2_xattr", NULL,
- sizeof(struct mb_cache_entry) +
- sizeof(((struct mb_cache_entry *) 0)->e_indexes[0]), 1, 6);
+ ext2_xattr_cache = mb_cache_create("ext2_xattr", 6);
if (!ext2_xattr_cache)
return -ENOMEM;
return 0;
ino = inode->i_ino;
ext3_debug ("freeing inode %lu\n", ino);
- /*
- * Note: we must free any quota before locking the superblock,
- * as writing the quota to disk may need the lock as well.
- */
- dquot_initialize(inode);
- ext3_xattr_delete_inode(handle, inode);
- dquot_free_inode(inode);
- dquot_drop(inode);
-
is_directory = S_ISDIR(inode->i_mode);
- /* Do this BEFORE marking the inode not in use or returning an error */
- clear_inode (inode);
-
es = EXT3_SB(sb)->s_es;
if (ino < EXT3_FIRST_INO(sb) || ino > le32_to_cpu(es->s_inodes_count)) {
ext3_error (sb, "ext3_free_inode",
}
/*
- * Called at the last iput() if i_nlink is zero.
+ * Called at inode eviction from icache
*/
-void ext3_delete_inode (struct inode * inode)
+void ext3_evict_inode (struct inode *inode)
{
+ struct ext3_block_alloc_info *rsv;
handle_t *handle;
+ int want_delete = 0;
- if (!is_bad_inode(inode))
+ if (!inode->i_nlink && !is_bad_inode(inode)) {
dquot_initialize(inode);
+ want_delete = 1;
+ }
truncate_inode_pages(&inode->i_data, 0);
- if (is_bad_inode(inode))
+ ext3_discard_reservation(inode);
+ rsv = EXT3_I(inode)->i_block_alloc_info;
+ EXT3_I(inode)->i_block_alloc_info = NULL;
+ if (unlikely(rsv))
+ kfree(rsv);
+
+ if (!want_delete)
goto no_delete;
handle = start_transaction(inode);
* having errors), but we can't free the inode if the mark_dirty
* fails.
*/
- if (ext3_mark_inode_dirty(handle, inode))
- /* If that failed, just do the required in-core inode clear. */
- clear_inode(inode);
- else
+ if (ext3_mark_inode_dirty(handle, inode)) {
+ /* If that failed, just dquot_drop() and be done with that */
+ dquot_drop(inode);
+ end_writeback(inode);
+ } else {
+ ext3_xattr_delete_inode(handle, inode);
+ dquot_free_inode(inode);
+ dquot_drop(inode);
+ end_writeback(inode);
ext3_free_inode(handle, inode);
+ }
ext3_journal_stop(handle);
return;
no_delete:
- clear_inode(inode); /* We must guarantee clearing of inode... */
+ end_writeback(inode);
+ dquot_drop(inode);
}
typedef struct {
ret = PTR_ERR(handle);
goto out;
}
- ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- ext3_get_block);
+ ret = __block_write_begin(page, pos, len, ext3_get_block);
if (ret)
goto write_begin_failed;
ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs,
ext3_get_block, NULL);
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries))
goto retry;
* If this was a simple ftruncate(), and the file will remain alive
* then we need to clear up the orphan record which we created above.
* However, if this was a real unlink then we were called by
- * ext3_delete_inode(), and we allow that function to clean up the
+ * ext3_evict_inode(), and we allow that function to clean up the
* orphan info for us.
*/
if (inode->i_nlink)
ext3_journal_stop(handle);
}
- rc = inode_setattr(inode, attr);
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ rc = vmtruncate(inode, attr->ia_size);
+ if (rc)
+ goto err_out;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
- if (!rc && (ia_valid & ATTR_MODE))
+ if (ia_valid & ATTR_MODE)
rc = ext3_acl_chmod(inode);
err_out:
kmem_cache_destroy(ext3_inode_cachep);
}
-static void ext3_clear_inode(struct inode *inode)
-{
- struct ext3_block_alloc_info *rsv = EXT3_I(inode)->i_block_alloc_info;
-
- dquot_drop(inode);
- ext3_discard_reservation(inode);
- EXT3_I(inode)->i_block_alloc_info = NULL;
- if (unlikely(rsv))
- kfree(rsv);
-}
-
static inline void ext3_show_quota_options(struct seq_file *seq, struct super_block *sb)
{
#if defined(CONFIG_QUOTA)
.destroy_inode = ext3_destroy_inode,
.write_inode = ext3_write_inode,
.dirty_inode = ext3_dirty_inode,
- .delete_inode = ext3_delete_inode,
+ .evict_inode = ext3_evict_inode,
.put_super = ext3_put_super,
.sync_fs = ext3_sync_fs,
.freeze_fs = ext3_freeze,
.unfreeze_fs = ext3_unfreeze,
.statfs = ext3_statfs,
.remount_fs = ext3_remount,
- .clear_inode = ext3_clear_inode,
.show_options = ext3_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext3_quota_read,
ea_bdebug(bh, "out of memory");
return;
}
- error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, &hash);
+ error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, hash);
if (error) {
mb_cache_entry_free(ce);
if (error == -EBUSY) {
return NULL; /* never share */
ea_idebug(inode, "looking for cached blocks [%x]", (int)hash);
again:
- ce = mb_cache_entry_find_first(ext3_xattr_cache, 0,
- inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_first(ext3_xattr_cache, inode->i_sb->s_bdev,
+ hash);
while (ce) {
struct buffer_head *bh;
return bh;
}
brelse(bh);
- ce = mb_cache_entry_find_next(ce, 0, inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_next(ce, inode->i_sb->s_bdev, hash);
}
return NULL;
}
int __init
init_ext3_xattr(void)
{
- ext3_xattr_cache = mb_cache_create("ext3_xattr", NULL,
- sizeof(struct mb_cache_entry) +
- sizeof(((struct mb_cache_entry *) 0)->e_indexes[0]), 1, 6);
+ ext3_xattr_cache = mb_cache_create("ext3_xattr", 6);
if (!ext3_xattr_cache)
return -ENOMEM;
return 0;
extern int ext4_setattr(struct dentry *, struct iattr *);
extern int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat);
-extern void ext4_delete_inode(struct inode *);
+extern void ext4_evict_inode(struct inode *);
+extern void ext4_clear_inode(struct inode *);
extern int ext4_sync_inode(handle_t *, struct inode *);
extern void ext4_dirty_inode(struct inode *);
extern int ext4_change_inode_journal_flag(struct inode *, int);
is_directory = S_ISDIR(inode->i_mode);
/* Do this BEFORE marking the inode not in use or returning an error */
- clear_inode(inode);
+ ext4_clear_inode(inode);
es = EXT4_SB(sb)->s_es;
if (ino < EXT4_FIRST_INO(sb) || ino > le32_to_cpu(es->s_inodes_count)) {
/*
* Called at the last iput() if i_nlink is zero.
*/
-void ext4_delete_inode(struct inode *inode)
+void ext4_evict_inode(struct inode *inode)
{
handle_t *handle;
int err;
+ if (inode->i_nlink) {
+ truncate_inode_pages(&inode->i_data, 0);
+ goto no_delete;
+ }
+
if (!is_bad_inode(inode))
dquot_initialize(inode);
*/
if (ext4_mark_inode_dirty(handle, inode))
/* If that failed, just do the required in-core inode clear. */
- clear_inode(inode);
+ ext4_clear_inode(inode);
else
ext4_free_inode(handle, inode);
ext4_journal_stop(handle);
return;
no_delete:
- clear_inode(inode); /* We must guarantee clearing of inode... */
+ ext4_clear_inode(inode); /* We must guarantee clearing of inode... */
}
typedef struct {
*pagep = page;
if (ext4_should_dioread_nolock(inode))
- ret = block_write_begin(file, mapping, pos, len, flags, pagep,
- fsdata, ext4_get_block_write);
+ ret = __block_write_begin(page, pos, len, ext4_get_block_write);
else
- ret = block_write_begin(file, mapping, pos, len, flags, pagep,
- fsdata, ext4_get_block);
+ ret = __block_write_begin(page, pos, len, ext4_get_block);
if (!ret && ext4_should_journal_data(inode)) {
ret = walk_page_buffers(handle, page_buffers(page),
unlock_page(page);
page_cache_release(page);
/*
- * block_write_begin may have instantiated a few blocks
+ * __block_write_begin may have instantiated a few blocks
* outside i_size. Trim these off again. Don't need
* i_size_read because we hold i_mutex.
*
}
*pagep = page;
- ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- ext4_da_get_block_prep);
+ ret = __block_write_begin(page, pos, len, ext4_da_get_block_prep);
if (ret < 0) {
unlock_page(page);
ext4_journal_stop(handle);
retry:
if (rw == READ && ext4_should_dioread_nolock(inode))
- ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
+ ret = __blockdev_direct_IO(rw, iocb, inode,
inode->i_sb->s_bdev, iov,
offset, nr_segs,
- ext4_get_block, NULL);
- else
+ ext4_get_block, NULL, NULL, 0);
+ else {
ret = blockdev_direct_IO(rw, iocb, inode,
inode->i_sb->s_bdev, iov,
offset, nr_segs,
ext4_get_block, NULL);
+
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+ }
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
ext4_truncate(inode);
}
- rc = inode_setattr(inode, attr);
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode))
+ rc = vmtruncate(inode, attr->ia_size);
- /* If inode_setattr's call to ext4_truncate failed to get a
- * transaction handle at all, we need to clean up the in-core
- * orphan list manually. */
+ if (!rc) {
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ }
+
+ /*
+ * If the call to ext4_truncate failed to get a transaction handle at
+ * all, we need to clean up the in-core orphan list manually.
+ */
if (inode->i_nlink)
ext4_orphan_del(NULL, inode);
kmem_cache_destroy(ext4_inode_cachep);
}
-static void ext4_clear_inode(struct inode *inode)
+void ext4_clear_inode(struct inode *inode)
{
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
dquot_drop(inode);
ext4_discard_preallocations(inode);
if (EXT4_JOURNAL(inode))
.destroy_inode = ext4_destroy_inode,
.write_inode = ext4_write_inode,
.dirty_inode = ext4_dirty_inode,
- .delete_inode = ext4_delete_inode,
+ .evict_inode = ext4_evict_inode,
.put_super = ext4_put_super,
.sync_fs = ext4_sync_fs,
.freeze_fs = ext4_freeze,
.unfreeze_fs = ext4_unfreeze,
.statfs = ext4_statfs,
.remount_fs = ext4_remount,
- .clear_inode = ext4_clear_inode,
.show_options = ext4_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext4_quota_read,
.destroy_inode = ext4_destroy_inode,
.write_inode = ext4_write_inode,
.dirty_inode = ext4_dirty_inode,
- .delete_inode = ext4_delete_inode,
+ .evict_inode = ext4_evict_inode,
.write_super = ext4_write_super,
.put_super = ext4_put_super,
.statfs = ext4_statfs,
.remount_fs = ext4_remount,
- .clear_inode = ext4_clear_inode,
.show_options = ext4_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext4_quota_read,
ea_bdebug(bh, "out of memory");
return;
}
- error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, &hash);
+ error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, hash);
if (error) {
mb_cache_entry_free(ce);
if (error == -EBUSY) {
return NULL; /* never share */
ea_idebug(inode, "looking for cached blocks [%x]", (int)hash);
again:
- ce = mb_cache_entry_find_first(ext4_xattr_cache, 0,
- inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_first(ext4_xattr_cache, inode->i_sb->s_bdev,
+ hash);
while (ce) {
struct buffer_head *bh;
return bh;
}
brelse(bh);
- ce = mb_cache_entry_find_next(ce, 0, inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_next(ce, inode->i_sb->s_bdev, hash);
}
return NULL;
}
int __init
init_ext4_xattr(void)
{
- ext4_xattr_cache = mb_cache_create("ext4_xattr", NULL,
- sizeof(struct mb_cache_entry) +
- sizeof(((struct mb_cache_entry *) 0)->e_indexes[0]), 1, 6);
+ ext4_xattr_cache = mb_cache_create("ext4_xattr", 6);
if (!ext4_xattr_cache)
return -ENOMEM;
return 0;
extern const struct file_operations fat_file_operations;
extern const struct inode_operations fat_file_inode_operations;
extern int fat_setattr(struct dentry * dentry, struct iattr * attr);
-extern int fat_setsize(struct inode *inode, loff_t offset);
extern void fat_truncate_blocks(struct inode *inode, loff_t offset);
extern int fat_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat);
return 0;
}
-int fat_setsize(struct inode *inode, loff_t offset)
-{
- int error;
-
- error = simple_setsize(inode, offset);
- if (error)
- return error;
- fat_truncate_blocks(inode, offset);
-
- return error;
-}
-
#define TIMES_SET_FLAGS (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)
/* valid file mode bits */
#define FAT_VALID_MODE (S_IFREG | S_IFDIR | S_IRWXUGO)
unsigned int ia_valid;
int error;
- /*
- * Expand the file. Since inode_setattr() updates ->i_size
- * before calling the ->truncate(), but FAT needs to fill the
- * hole before it. XXX: this is no longer true with new truncate
- * sequence.
- */
- if (attr->ia_valid & ATTR_SIZE) {
- if (attr->ia_size > inode->i_size) {
- error = fat_cont_expand(inode, attr->ia_size);
- if (error || attr->ia_valid == ATTR_SIZE)
- goto out;
- attr->ia_valid &= ~ATTR_SIZE;
- }
- }
-
/* Check for setting the inode time. */
ia_valid = attr->ia_valid;
if (ia_valid & TIMES_SET_FLAGS) {
goto out;
}
+ /*
+ * Expand the file. Since inode_setattr() updates ->i_size
+ * before calling the ->truncate(), but FAT needs to fill the
+ * hole before it. XXX: this is no longer true with new truncate
+ * sequence.
+ */
+ if (attr->ia_valid & ATTR_SIZE) {
+ if (attr->ia_size > inode->i_size) {
+ error = fat_cont_expand(inode, attr->ia_size);
+ if (error || attr->ia_valid == ATTR_SIZE)
+ goto out;
+ attr->ia_valid &= ~ATTR_SIZE;
+ }
+ }
+
if (((attr->ia_valid & ATTR_UID) &&
(attr->ia_uid != sbi->options.fs_uid)) ||
((attr->ia_valid & ATTR_GID) &&
}
if (attr->ia_valid & ATTR_SIZE) {
- error = fat_setsize(inode, attr->ia_size);
- if (error)
- goto out;
+ truncate_setsize(inode, attr->ia_size);
+ fat_truncate_blocks(inode, attr->ia_size);
}
- generic_setattr(inode, attr);
+ setattr_copy(inode, attr);
mark_inode_dirty(inode);
out:
return error;
int err;
*pagep = NULL;
- err = cont_write_begin_newtrunc(file, mapping, pos, len, flags,
+ err = cont_write_begin(file, mapping, pos, len, flags,
pagep, fsdata, fat_get_block,
&MSDOS_I(mapping->host)->mmu_private);
if (err < 0)
* FAT need to use the DIO_LOCKING for avoiding the race
* condition of fat_get_block() and ->truncate().
*/
- ret = blockdev_direct_IO_newtrunc(rw, iocb, inode, inode->i_sb->s_bdev,
- iov, offset, nr_segs, fat_get_block, NULL);
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev,
+ iov, offset, nr_segs, fat_get_block, NULL);
if (ret < 0 && (rw & WRITE))
fat_write_failed(mapping, offset + iov_length(iov, nr_segs));
* check if the location is still valid and retry if it
* isn't. Otherwise we do changes.
* 5. Spinlock is used to protect hash/unhash/location check/lookup
- * 6. fat_clear_inode() unhashes the F-d-c entry.
+ * 6. fat_evict_inode() unhashes the F-d-c entry.
* 7. lookup() and readdir() do igrab() if they find a F-d-c entry
* and consider negative result as cache miss.
*/
EXPORT_SYMBOL_GPL(fat_build_inode);
-static void fat_delete_inode(struct inode *inode)
+static void fat_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
- inode->i_size = 0;
- fat_truncate_blocks(inode, 0);
- clear_inode(inode);
-}
-
-static void fat_clear_inode(struct inode *inode)
-{
+ if (!inode->i_nlink) {
+ inode->i_size = 0;
+ fat_truncate_blocks(inode, 0);
+ }
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
fat_cache_inval_inode(inode);
fat_detach(inode);
}
.alloc_inode = fat_alloc_inode,
.destroy_inode = fat_destroy_inode,
.write_inode = fat_write_inode,
- .delete_inode = fat_delete_inode,
+ .evict_inode = fat_evict_inode,
.put_super = fat_put_super,
.write_super = fat_write_super,
.sync_fs = fat_sync_fs,
.statfs = fat_statfs,
- .clear_inode = fat_clear_inode,
.remount_fs = fat_remount,
.show_options = fat_show_options,
{
int i, err = 0;
- ll_rw_block(SWRITE, nr_bhs, bhs);
+ for (i = 0; i < nr_bhs; i++)
+ write_dirty_buffer(bhs[i], WRITE);
+
for (i = 0; i < nr_bhs; i++) {
wait_on_buffer(bhs[i]);
if (buffer_eopnotsupp(bhs[i])) {
}
EXPORT_SYMBOL(kill_fasync);
-static int __init fasync_init(void)
+static int __init fcntl_init(void)
{
+ /* please add new bits here to ensure allocation uniqueness */
+ BUILD_BUG_ON(19 - 1 /* for O_RDONLY being 0 */ != HWEIGHT32(
+ O_RDONLY | O_WRONLY | O_RDWR |
+ O_CREAT | O_EXCL | O_NOCTTY |
+ O_TRUNC | O_APPEND | O_NONBLOCK |
+ __O_SYNC | O_DSYNC | FASYNC |
+ O_DIRECT | O_LARGEFILE | O_DIRECTORY |
+ O_NOFOLLOW | O_NOATIME | O_CLOEXEC |
+ FMODE_EXEC
+ ));
+
fasync_cache = kmem_cache_create("fasync_cache",
sizeof(struct fasync_struct), 0, SLAB_PANIC, NULL);
return 0;
}
-module_init(fasync_init)
+module_init(fcntl_init)
*/
static DEFINE_PER_CPU(struct fdtable_defer, fdtable_defer_list);
-static inline void * alloc_fdmem(unsigned int size)
+static inline void *alloc_fdmem(unsigned int size)
{
- if (size <= PAGE_SIZE)
- return kmalloc(size, GFP_KERNEL);
- else
- return vmalloc(size);
+ void *data;
+
+ data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN);
+ if (data != NULL)
+ return data;
+
+ return vmalloc(size);
}
-static inline void free_fdarr(struct fdtable *fdt)
+static void free_fdmem(void *ptr)
{
- if (fdt->max_fds <= (PAGE_SIZE / sizeof(struct file *)))
- kfree(fdt->fd);
- else
- vfree(fdt->fd);
+ is_vmalloc_addr(ptr) ? vfree(ptr) : kfree(ptr);
}
-static inline void free_fdset(struct fdtable *fdt)
+static void __free_fdtable(struct fdtable *fdt)
{
- if (fdt->max_fds <= (PAGE_SIZE * BITS_PER_BYTE / 2))
- kfree(fdt->open_fds);
- else
- vfree(fdt->open_fds);
+ free_fdmem(fdt->fd);
+ free_fdmem(fdt->open_fds);
+ kfree(fdt);
}
static void free_fdtable_work(struct work_struct *work)
spin_unlock_bh(&f->lock);
while(fdt) {
struct fdtable *next = fdt->next;
- vfree(fdt->fd);
- free_fdset(fdt);
- kfree(fdt);
+
+ __free_fdtable(fdt);
fdt = next;
}
}
container_of(fdt, struct files_struct, fdtab));
return;
}
- if (fdt->max_fds <= (PAGE_SIZE / sizeof(struct file *))) {
+ if (!is_vmalloc_addr(fdt->fd) && !is_vmalloc_addr(fdt->open_fds)) {
kfree(fdt->fd);
kfree(fdt->open_fds);
kfree(fdt);
return fdt;
out_arr:
- free_fdarr(fdt);
+ free_fdmem(fdt->fd);
out_fdt:
kfree(fdt);
out:
* caller and alloc_fdtable(). Cheaper to catch it here...
*/
if (unlikely(new_fdt->max_fds <= nr)) {
- free_fdarr(new_fdt);
- free_fdset(new_fdt);
- kfree(new_fdt);
+ __free_fdtable(new_fdt);
return -EMFILE;
}
/*
free_fdtable(cur_fdt);
} else {
/* Somebody else expanded, so undo our attempt */
- free_fdarr(new_fdt);
- free_fdset(new_fdt);
- kfree(new_fdt);
+ __free_fdtable(new_fdt);
}
return 1;
}
while (unlikely(open_files > new_fdt->max_fds)) {
spin_unlock(&oldf->file_lock);
- if (new_fdt != &newf->fdtab) {
- free_fdarr(new_fdt);
- free_fdset(new_fdt);
- kfree(new_fdt);
- }
+ if (new_fdt != &newf->fdtab)
+ __free_fdtable(new_fdt);
new_fdt = alloc_fdtable(open_files - 1);
if (!new_fdt) {
/* beyond sysctl_nr_open; nothing to do */
if (unlikely(new_fdt->max_fds < open_files)) {
- free_fdarr(new_fdt);
- free_fdset(new_fdt);
- kfree(new_fdt);
+ __free_fdtable(new_fdt);
*errorp = -EMFILE;
goto out_release;
}
#include <linux/cdev.h>
#include <linux/fsnotify.h>
#include <linux/sysctl.h>
+#include <linux/lglock.h>
#include <linux/percpu_counter.h>
+#include <linux/percpu.h>
#include <linux/ima.h>
#include <asm/atomic.h>
.max_files = NR_FILE
};
-/* public. Not pretty! */
-__cacheline_aligned_in_smp DEFINE_SPINLOCK(files_lock);
+DECLARE_LGLOCK(files_lglock);
+DEFINE_LGLOCK(files_lglock);
/* SLAB cache for file structures */
static struct kmem_cache *filp_cachep __read_mostly;
cdev_put(inode->i_cdev);
fops_put(file->f_op);
put_pid(file->f_owner.pid);
- file_kill(file);
+ file_sb_list_del(file);
if (file->f_mode & FMODE_WRITE)
drop_file_write_access(file);
file->f_path.dentry = NULL;
EXPORT_SYMBOL(fget);
/*
- * Lightweight file lookup - no refcnt increment if fd table isn't shared.
- * You can use this only if it is guranteed that the current task already
- * holds a refcnt to that file. That check has to be done at fget() only
- * and a flag is returned to be passed to the corresponding fput_light().
- * There must not be a cloning between an fget_light/fput_light pair.
+ * Lightweight file lookup - no refcnt increment if fd table isn't shared.
+ *
+ * You can use this instead of fget if you satisfy all of the following
+ * conditions:
+ * 1) You must call fput_light before exiting the syscall and returning control
+ * to userspace (i.e. you cannot remember the returned struct file * after
+ * returning to userspace).
+ * 2) You must not call filp_close on the returned struct file * in between
+ * calls to fget_light and fput_light.
+ * 3) You must not clone the current task in between the calls to fget_light
+ * and fput_light.
+ *
+ * The fput_needed flag returned by fget_light should be passed to the
+ * corresponding fput_light.
*/
struct file *fget_light(unsigned int fd, int *fput_needed)
{
return file;
}
-
void put_filp(struct file *file)
{
if (atomic_long_dec_and_test(&file->f_count)) {
security_file_free(file);
- file_kill(file);
+ file_sb_list_del(file);
file_free(file);
}
}
-void file_move(struct file *file, struct list_head *list)
+static inline int file_list_cpu(struct file *file)
{
- if (!list)
- return;
- file_list_lock();
- list_move(&file->f_u.fu_list, list);
- file_list_unlock();
+#ifdef CONFIG_SMP
+ return file->f_sb_list_cpu;
+#else
+ return smp_processor_id();
+#endif
}
-void file_kill(struct file *file)
+/* helper for file_sb_list_add to reduce ifdefs */
+static inline void __file_sb_list_add(struct file *file, struct super_block *sb)
+{
+ struct list_head *list;
+#ifdef CONFIG_SMP
+ int cpu;
+ cpu = smp_processor_id();
+ file->f_sb_list_cpu = cpu;
+ list = per_cpu_ptr(sb->s_files, cpu);
+#else
+ list = &sb->s_files;
+#endif
+ list_add(&file->f_u.fu_list, list);
+}
+
+/**
+ * file_sb_list_add - add a file to the sb's file list
+ * @file: file to add
+ * @sb: sb to add it to
+ *
+ * Use this function to associate a file with the superblock of the inode it
+ * refers to.
+ */
+void file_sb_list_add(struct file *file, struct super_block *sb)
+{
+ lg_local_lock(files_lglock);
+ __file_sb_list_add(file, sb);
+ lg_local_unlock(files_lglock);
+}
+
+/**
+ * file_sb_list_del - remove a file from the sb's file list
+ * @file: file to remove
+ * @sb: sb to remove it from
+ *
+ * Use this function to remove a file from its superblock.
+ */
+void file_sb_list_del(struct file *file)
{
if (!list_empty(&file->f_u.fu_list)) {
- file_list_lock();
+ lg_local_lock_cpu(files_lglock, file_list_cpu(file));
list_del_init(&file->f_u.fu_list);
- file_list_unlock();
+ lg_local_unlock_cpu(files_lglock, file_list_cpu(file));
}
}
+#ifdef CONFIG_SMP
+
+/*
+ * These macros iterate all files on all CPUs for a given superblock.
+ * files_lglock must be held globally.
+ */
+#define do_file_list_for_each_entry(__sb, __file) \
+{ \
+ int i; \
+ for_each_possible_cpu(i) { \
+ struct list_head *list; \
+ list = per_cpu_ptr((__sb)->s_files, i); \
+ list_for_each_entry((__file), list, f_u.fu_list)
+
+#define while_file_list_for_each_entry \
+ } \
+}
+
+#else
+
+#define do_file_list_for_each_entry(__sb, __file) \
+{ \
+ struct list_head *list; \
+ list = &(sb)->s_files; \
+ list_for_each_entry((__file), list, f_u.fu_list)
+
+#define while_file_list_for_each_entry \
+}
+
+#endif
+
int fs_may_remount_ro(struct super_block *sb)
{
struct file *file;
-
/* Check that no files are currently opened for writing. */
- file_list_lock();
- list_for_each_entry(file, &sb->s_files, f_u.fu_list) {
+ lg_global_lock(files_lglock);
+ do_file_list_for_each_entry(sb, file) {
struct inode *inode = file->f_path.dentry->d_inode;
/* File with pending delete? */
/* Writeable file? */
if (S_ISREG(inode->i_mode) && (file->f_mode & FMODE_WRITE))
goto too_bad;
- }
- file_list_unlock();
+ } while_file_list_for_each_entry;
+ lg_global_unlock(files_lglock);
return 1; /* Tis' cool bro. */
too_bad:
- file_list_unlock();
+ lg_global_unlock(files_lglock);
return 0;
}
struct file *f;
retry:
- file_list_lock();
- list_for_each_entry(f, &sb->s_files, f_u.fu_list) {
+ lg_global_lock(files_lglock);
+ do_file_list_for_each_entry(sb, f) {
struct vfsmount *mnt;
if (!S_ISREG(f->f_path.dentry->d_inode->i_mode))
continue;
continue;
file_release_write(f);
mnt = mntget(f->f_path.mnt);
- file_list_unlock();
- /*
- * This can sleep, so we can't hold
- * the file_list_lock() spinlock.
- */
+ /* This can sleep, so we can't hold the spinlock. */
+ lg_global_unlock(files_lglock);
mnt_drop_write(mnt);
mntput(mnt);
goto retry;
- }
- file_list_unlock();
+ } while_file_list_for_each_entry;
+ lg_global_unlock(files_lglock);
}
void __init files_init(unsigned long mempages)
if (files_stat.max_files < NR_FILE)
files_stat.max_files = NR_FILE;
files_defer_init();
+ lg_lock_init(files_lglock);
percpu_counter_init(&nr_files, 0);
}
extern struct vxfs_inode_info * vxfs_blkiget(struct super_block *, u_long, ino_t);
extern struct vxfs_inode_info * vxfs_stiget(struct super_block *, ino_t);
extern struct inode * vxfs_iget(struct super_block *, ino_t);
-extern void vxfs_clear_inode(struct inode *);
+extern void vxfs_evict_inode(struct inode *);
/* vxfs_lookup.c */
extern const struct inode_operations vxfs_dir_inode_ops;
}
/**
- * vxfs_clear_inode - remove inode from main memory
+ * vxfs_evict_inode - remove inode from main memory
* @ip: inode to discard.
*
* Description:
- * vxfs_clear_inode() is called on the final iput and frees the private
+ * vxfs_evict_inode() is called on the final iput and frees the private
* inode area.
*/
void
-vxfs_clear_inode(struct inode *ip)
+vxfs_evict_inode(struct inode *ip)
{
+ truncate_inode_pages(&ip->i_data, 0);
+ end_writeback(ip);
kmem_cache_free(vxfs_inode_cachep, ip->i_private);
}
static int vxfs_remount(struct super_block *, int *, char *);
static const struct super_operations vxfs_super_ops = {
- .clear_inode = vxfs_clear_inode,
+ .evict_inode = vxfs_evict_inode,
.put_super = vxfs_put_super,
.statfs = vxfs_statfs,
.remount_fs = vxfs_remount,
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/buffer_head.h>
+#include <linux/tracepoint.h>
#include "internal.h"
-#define inode_to_bdi(inode) ((inode)->i_mapping->backing_dev_info)
-
-/*
- * We don't actually have pdflush, but this one is exported though /proc...
- */
-int nr_pdflush_threads;
-
/*
* Passed into wb_writeback(), essentially a subset of writeback_control
*/
struct completion *done; /* set if the caller waits */
};
+/*
+ * Include the creation of the trace points after defining the
+ * wb_writeback_work structure so that the definition remains local to this
+ * file.
+ */
+#define CREATE_TRACE_POINTS
+#include <trace/events/writeback.h>
+
+#define inode_to_bdi(inode) ((inode)->i_mapping->backing_dev_info)
+
+/*
+ * We don't actually have pdflush, but this one is exported though /proc...
+ */
+int nr_pdflush_threads;
+
/**
* writeback_in_progress - determine whether there is writeback in progress
* @bdi: the device's backing_dev_info structure.
*/
int writeback_in_progress(struct backing_dev_info *bdi)
{
- return !list_empty(&bdi->work_list);
+ return test_bit(BDI_writeback_running, &bdi->state);
}
static void bdi_queue_work(struct backing_dev_info *bdi,
struct wb_writeback_work *work)
{
- spin_lock(&bdi->wb_lock);
- list_add_tail(&work->list, &bdi->work_list);
- spin_unlock(&bdi->wb_lock);
+ trace_writeback_queue(bdi, work);
- /*
- * If the default thread isn't there, make sure we add it. When
- * it gets created and wakes up, we'll run this work.
- */
- if (unlikely(list_empty_careful(&bdi->wb_list)))
+ spin_lock_bh(&bdi->wb_lock);
+ list_add_tail(&work->list, &bdi->work_list);
+ if (bdi->wb.task) {
+ wake_up_process(bdi->wb.task);
+ } else {
+ /*
+ * The bdi thread isn't there, wake up the forker thread which
+ * will create and run it.
+ */
+ trace_writeback_nothread(bdi, work);
wake_up_process(default_backing_dev_info.wb.task);
- else {
- struct bdi_writeback *wb = &bdi->wb;
-
- if (wb->task)
- wake_up_process(wb->task);
}
+ spin_unlock_bh(&bdi->wb_lock);
}
static void
*/
work = kzalloc(sizeof(*work), GFP_ATOMIC);
if (!work) {
- if (bdi->wb.task)
+ if (bdi->wb.task) {
+ trace_writeback_nowork(bdi);
wake_up_process(bdi->wb.task);
+ }
return;
}
/*
* Queue all expired dirty inodes for io, eldest first.
+ * Before
+ * newly dirtied b_dirty b_io b_more_io
+ * =============> gf edc BA
+ * After
+ * newly dirtied b_dirty b_io b_more_io
+ * =============> g fBAedc
+ * |
+ * +--> dequeue for IO
*/
static void queue_io(struct bdi_writeback *wb, unsigned long *older_than_this)
{
- list_splice_init(&wb->b_more_io, wb->b_io.prev);
+ list_splice_init(&wb->b_more_io, &wb->b_io);
move_expired_inodes(&wb->b_dirty, &wb->b_io, older_than_this);
}
spin_lock(&inode_lock);
inode->i_state &= ~I_SYNC;
- if (!(inode->i_state & (I_FREEING | I_CLEAR))) {
- if ((inode->i_state & I_DIRTY_PAGES) && wbc->for_kupdate) {
- /*
- * More pages get dirtied by a fast dirtier.
- */
- goto select_queue;
- } else if (inode->i_state & I_DIRTY) {
- /*
- * At least XFS will redirty the inode during the
- * writeback (delalloc) and on io completion (isize).
- */
- redirty_tail(inode);
- } else if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+ if (!(inode->i_state & I_FREEING)) {
+ if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
/*
* We didn't write back all the pages. nfs_writepages()
- * sometimes bales out without doing anything. Redirty
- * the inode; Move it from b_io onto b_more_io/b_dirty.
- */
- /*
- * akpm: if the caller was the kupdate function we put
- * this inode at the head of b_dirty so it gets first
- * consideration. Otherwise, move it to the tail, for
- * the reasons described there. I'm not really sure
- * how much sense this makes. Presumably I had a good
- * reasons for doing it this way, and I'd rather not
- * muck with it at present.
+ * sometimes bales out without doing anything.
*/
- if (wbc->for_kupdate) {
+ inode->i_state |= I_DIRTY_PAGES;
+ if (wbc->nr_to_write <= 0) {
/*
- * For the kupdate function we move the inode
- * to b_more_io so it will get more writeout as
- * soon as the queue becomes uncongested.
+ * slice used up: queue for next turn
*/
- inode->i_state |= I_DIRTY_PAGES;
-select_queue:
- if (wbc->nr_to_write <= 0) {
- /*
- * slice used up: queue for next turn
- */
- requeue_io(inode);
- } else {
- /*
- * somehow blocked: retry later
- */
- redirty_tail(inode);
- }
+ requeue_io(inode);
} else {
/*
- * Otherwise fully redirty the inode so that
- * other inodes on this superblock will get some
- * writeout. Otherwise heavy writing to one
- * file would indefinitely suspend writeout of
- * all the other files.
+ * Writeback blocked by something other than
+ * congestion. Delay the inode for some time to
+ * avoid spinning on the CPU (100% iowait)
+ * retrying writeback of the dirty page/inode
+ * that cannot be performed immediately.
*/
- inode->i_state |= I_DIRTY_PAGES;
redirty_tail(inode);
}
+ } else if (inode->i_state & I_DIRTY) {
+ /*
+ * Filesystems can dirty the inode during writeback
+ * operations, such as delayed allocation during
+ * submission or metadata updates after data IO
+ * completion.
+ */
+ redirty_tail(inode);
} else if (atomic_read(&inode->i_count)) {
/*
* The inode is clean, inuse
if (inode_dirtied_after(inode, wbc->wb_start))
return 1;
- BUG_ON(inode->i_state & (I_FREEING | I_CLEAR));
+ BUG_ON(inode->i_state & I_FREEING);
__iget(inode);
pages_skipped = wbc->pages_skipped;
writeback_single_inode(inode, wbc);
{
unsigned long background_thresh, dirty_thresh;
- get_dirty_limits(&background_thresh, &dirty_thresh, NULL, NULL);
+ global_dirty_limits(&background_thresh, &dirty_thresh);
return (global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_UNSTABLE_NFS) >= background_thresh);
wbc.more_io = 0;
wbc.nr_to_write = MAX_WRITEBACK_PAGES;
wbc.pages_skipped = 0;
+
+ trace_wbc_writeback_start(&wbc, wb->bdi);
if (work->sb)
__writeback_inodes_sb(work->sb, wb, &wbc);
else
writeback_inodes_wb(wb, &wbc);
+ trace_wbc_writeback_written(&wbc, wb->bdi);
+
work->nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
if (!list_empty(&wb->b_more_io)) {
inode = list_entry(wb->b_more_io.prev,
struct inode, i_list);
+ trace_wbc_writeback_wait(&wbc, wb->bdi);
inode_wait_for_writeback(inode);
}
spin_unlock(&inode_lock);
* Return the next wb_writeback_work struct that hasn't been processed yet.
*/
static struct wb_writeback_work *
-get_next_work_item(struct backing_dev_info *bdi, struct bdi_writeback *wb)
+get_next_work_item(struct backing_dev_info *bdi)
{
struct wb_writeback_work *work = NULL;
- spin_lock(&bdi->wb_lock);
+ spin_lock_bh(&bdi->wb_lock);
if (!list_empty(&bdi->work_list)) {
work = list_entry(bdi->work_list.next,
struct wb_writeback_work, list);
list_del_init(&work->list);
}
- spin_unlock(&bdi->wb_lock);
+ spin_unlock_bh(&bdi->wb_lock);
return work;
}
struct wb_writeback_work *work;
long wrote = 0;
- while ((work = get_next_work_item(bdi, wb)) != NULL) {
+ set_bit(BDI_writeback_running, &wb->bdi->state);
+ while ((work = get_next_work_item(bdi)) != NULL) {
/*
* Override sync mode, in case we must wait for completion
* because this thread is exiting now.
if (force_wait)
work->sync_mode = WB_SYNC_ALL;
+ trace_writeback_exec(bdi, work);
+
wrote += wb_writeback(wb, work);
/*
* Check for periodic writeback, kupdated() style
*/
wrote += wb_check_old_data_flush(wb);
+ clear_bit(BDI_writeback_running, &wb->bdi->state);
return wrote;
}
* Handle writeback of dirty data for the device backed by this bdi. Also
* wakes up periodically and does kupdated style flushing.
*/
-int bdi_writeback_task(struct bdi_writeback *wb)
+int bdi_writeback_thread(void *data)
{
- unsigned long last_active = jiffies;
- unsigned long wait_jiffies = -1UL;
+ struct bdi_writeback *wb = data;
+ struct backing_dev_info *bdi = wb->bdi;
long pages_written;
+ current->flags |= PF_FLUSHER | PF_SWAPWRITE;
+ set_freezable();
+ wb->last_active = jiffies;
+
+ /*
+ * Our parent may run at a different priority, just set us to normal
+ */
+ set_user_nice(current, 0);
+
+ trace_writeback_thread_start(bdi);
+
while (!kthread_should_stop()) {
+ /*
+ * Remove own delayed wake-up timer, since we are already awake
+ * and we'll take care of the preriodic write-back.
+ */
+ del_timer(&wb->wakeup_timer);
+
pages_written = wb_do_writeback(wb, 0);
+ trace_writeback_pages_written(pages_written);
+
if (pages_written)
- last_active = jiffies;
- else if (wait_jiffies != -1UL) {
- unsigned long max_idle;
+ wb->last_active = jiffies;
- /*
- * Longest period of inactivity that we tolerate. If we
- * see dirty data again later, the task will get
- * recreated automatically.
- */
- max_idle = max(5UL * 60 * HZ, wait_jiffies);
- if (time_after(jiffies, max_idle + last_active))
- break;
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (!list_empty(&bdi->work_list)) {
+ __set_current_state(TASK_RUNNING);
+ continue;
}
- if (dirty_writeback_interval) {
- wait_jiffies = msecs_to_jiffies(dirty_writeback_interval * 10);
- schedule_timeout_interruptible(wait_jiffies);
- } else {
- set_current_state(TASK_INTERRUPTIBLE);
- if (list_empty_careful(&wb->bdi->work_list) &&
- !kthread_should_stop())
- schedule();
- __set_current_state(TASK_RUNNING);
+ if (wb_has_dirty_io(wb) && dirty_writeback_interval)
+ schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10));
+ else {
+ /*
+ * We have nothing to do, so can go sleep without any
+ * timeout and save power. When a work is queued or
+ * something is made dirty - we will be woken up.
+ */
+ schedule();
}
try_to_freeze();
}
+ /* Flush any work that raced with us exiting */
+ if (!list_empty(&bdi->work_list))
+ wb_do_writeback(wb, 1);
+
+ trace_writeback_thread_stop(bdi);
return 0;
}
+
/*
* Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
* the whole world.
void __mark_inode_dirty(struct inode *inode, int flags)
{
struct super_block *sb = inode->i_sb;
+ struct backing_dev_info *bdi = NULL;
+ bool wakeup_bdi = false;
/*
* Don't do this for I_DIRTY_PAGES - that doesn't actually
if (hlist_unhashed(&inode->i_hash))
goto out;
}
- if (inode->i_state & (I_FREEING|I_CLEAR))
+ if (inode->i_state & I_FREEING)
goto out;
/*
* reposition it (that would break b_dirty time-ordering).
*/
if (!was_dirty) {
- struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
- struct backing_dev_info *bdi = wb->bdi;
-
- if (bdi_cap_writeback_dirty(bdi) &&
- !test_bit(BDI_registered, &bdi->state)) {
- WARN_ON(1);
- printk(KERN_ERR "bdi-%s not registered\n",
- bdi->name);
+ bdi = inode_to_bdi(inode);
+
+ if (bdi_cap_writeback_dirty(bdi)) {
+ WARN(!test_bit(BDI_registered, &bdi->state),
+ "bdi-%s not registered\n", bdi->name);
+
+ /*
+ * If this is the first dirty inode for this
+ * bdi, we have to wake-up the corresponding
+ * bdi thread to make sure background
+ * write-back happens later.
+ */
+ if (!wb_has_dirty_io(&bdi->wb))
+ wakeup_bdi = true;
}
inode->dirtied_when = jiffies;
- list_move(&inode->i_list, &wb->b_dirty);
+ list_move(&inode->i_list, &bdi->wb.b_dirty);
}
}
out:
spin_unlock(&inode_lock);
+
+ if (wakeup_bdi)
+ bdi_wakeup_thread_delayed(bdi);
}
EXPORT_SYMBOL(__mark_inode_dirty);
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
struct address_space *mapping;
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
continue;
mapping = inode->i_mapping;
if (mapping->nrpages == 0)
{
struct path old_root;
- write_lock(&fs->lock);
+ spin_lock(&fs->lock);
old_root = fs->root;
fs->root = *path;
path_get(path);
- write_unlock(&fs->lock);
+ spin_unlock(&fs->lock);
if (old_root.dentry)
path_put(&old_root);
}
{
struct path old_pwd;
- write_lock(&fs->lock);
+ spin_lock(&fs->lock);
old_pwd = fs->pwd;
fs->pwd = *path;
path_get(path);
- write_unlock(&fs->lock);
+ spin_unlock(&fs->lock);
if (old_pwd.dentry)
path_put(&old_pwd);
task_lock(p);
fs = p->fs;
if (fs) {
- write_lock(&fs->lock);
+ spin_lock(&fs->lock);
if (fs->root.dentry == old_root->dentry
&& fs->root.mnt == old_root->mnt) {
path_get(new_root);
fs->pwd = *new_root;
count++;
}
- write_unlock(&fs->lock);
+ spin_unlock(&fs->lock);
}
task_unlock(p);
} while_each_thread(g, p);
if (fs) {
int kill;
task_lock(tsk);
- write_lock(&fs->lock);
+ spin_lock(&fs->lock);
tsk->fs = NULL;
kill = !--fs->users;
- write_unlock(&fs->lock);
+ spin_unlock(&fs->lock);
task_unlock(tsk);
if (kill)
free_fs_struct(fs);
if (fs) {
fs->users = 1;
fs->in_exec = 0;
- rwlock_init(&fs->lock);
+ spin_lock_init(&fs->lock);
fs->umask = old->umask;
- read_lock(&old->lock);
- fs->root = old->root;
- path_get(&old->root);
- fs->pwd = old->pwd;
- path_get(&old->pwd);
- read_unlock(&old->lock);
+ get_fs_root_and_pwd(old, &fs->root, &fs->pwd);
}
return fs;
}
return -ENOMEM;
task_lock(current);
- write_lock(&fs->lock);
+ spin_lock(&fs->lock);
kill = !--fs->users;
current->fs = new_fs;
- write_unlock(&fs->lock);
+ spin_unlock(&fs->lock);
task_unlock(current);
if (kill)
/* to be mentioned only in INIT_TASK */
struct fs_struct init_fs = {
.users = 1,
- .lock = __RW_LOCK_UNLOCKED(init_fs.lock),
+ .lock = __SPIN_LOCK_UNLOCKED(init_fs.lock),
.umask = 0022,
};
task_lock(current);
- write_lock(&init_fs.lock);
+ spin_lock(&init_fs.lock);
init_fs.users++;
- write_unlock(&init_fs.lock);
+ spin_unlock(&init_fs.lock);
- write_lock(&fs->lock);
+ spin_lock(&fs->lock);
current->fs = &init_fs;
kill = !--fs->users;
- write_unlock(&fs->lock);
+ spin_unlock(&fs->lock);
task_unlock(current);
if (kill)
#define dbgprintk(FMT, ...) \
printk(KERN_DEBUG "[%-6.6s] "FMT"\n", current->comm, ##__VA_ARGS__)
-/* make sure we maintain the format strings, even when debugging is disabled */
-static inline __attribute__((format(printf, 1, 2)))
-void _dbprintk(const char *fmt, ...)
-{
-}
-
#define kenter(FMT, ...) dbgprintk("==> %s("FMT")", __func__, ##__VA_ARGS__)
#define kleave(FMT, ...) dbgprintk("<== %s()"FMT"", __func__, ##__VA_ARGS__)
#define kdebug(FMT, ...) dbgprintk(FMT, ##__VA_ARGS__)
-#define kjournal(FMT, ...) _dbprintk(FMT, ##__VA_ARGS__)
+#define kjournal(FMT, ...) no_printk(FMT, ##__VA_ARGS__)
#ifdef __KDEBUG
#define _enter(FMT, ...) kenter(FMT, ##__VA_ARGS__)
} while (0)
#else
-#define _enter(FMT, ...) _dbprintk("==> %s("FMT")", __func__, ##__VA_ARGS__)
-#define _leave(FMT, ...) _dbprintk("<== %s()"FMT"", __func__, ##__VA_ARGS__)
-#define _debug(FMT, ...) _dbprintk(FMT, ##__VA_ARGS__)
+#define _enter(FMT, ...) no_printk("==> %s("FMT")", __func__, ##__VA_ARGS__)
+#define _leave(FMT, ...) no_printk("<== %s()"FMT"", __func__, ##__VA_ARGS__)
+#define _debug(FMT, ...) no_printk(FMT, ##__VA_ARGS__)
#endif
/*
if (!fuse_allow_task(fc, current))
return -EACCES;
- if (fc->flags & FUSE_DEFAULT_PERMISSIONS) {
- err = inode_change_ok(inode, attr);
- if (err)
- return err;
- }
+ if (!(fc->flags & FUSE_DEFAULT_PERMISSIONS))
+ attr->ia_valid |= ATTR_FORCE;
+
+ err = inode_change_ok(inode, attr);
+ if (err)
+ return err;
if ((attr->ia_valid & ATTR_OPEN) && fc->atomic_o_trunc)
return 0;
- if (attr->ia_valid & ATTR_SIZE) {
- err = inode_newsize_ok(inode, attr->ia_size);
- if (err)
- return err;
+ if (attr->ia_valid & ATTR_SIZE)
is_truncate = true;
- }
req = fuse_get_req(fc);
if (IS_ERR(req))
fuse_request_send_noreply(fc, req);
}
-static void fuse_clear_inode(struct inode *inode)
+static void fuse_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
if (inode->i_sb->s_flags & MS_ACTIVE) {
struct fuse_conn *fc = get_fuse_conn(inode);
struct fuse_inode *fi = get_fuse_inode(inode);
static const struct super_operations fuse_super_operations = {
.alloc_inode = fuse_alloc_inode,
.destroy_inode = fuse_destroy_inode,
- .clear_inode = fuse_clear_inode,
+ .evict_inode = fuse_evict_inode,
.drop_inode = generic_delete_inode,
.remount_fs = fuse_remount_fs,
.put_super = fuse_put_super,
if (error < 0)
goto failed;
inode->i_mode = mode;
+ inode->i_ctime = CURRENT_TIME;
if (error == 0) {
posix_acl_release(acl);
acl = NULL;
page_cache_release(page);
/*
- * XXX(hch): the call below should probably be replaced with
+ * XXX(truncate): the call below should probably be replaced with
* a call to the gfs2-specific truncate blocks helper to actually
* release disk blocks..
*/
if (pos + len > ip->i_inode.i_size)
- simple_setsize(&ip->i_inode, ip->i_inode.i_size);
+ truncate_setsize(&ip->i_inode, ip->i_inode.i_size);
out_endtrans:
gfs2_trans_end(sdp);
out_trans_fail:
if (rv != 1)
goto out; /* dio not valid, fall back to buffered i/o */
- rv = blockdev_direct_IO_no_locking(rw, iocb, inode, inode->i_sb->s_bdev,
- iov, offset, nr_segs,
- gfs2_get_block_direct, NULL);
+ rv = __blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ offset, nr_segs, gfs2_get_block_direct,
+ NULL, NULL, 0);
out:
gfs2_glock_dq_m(1, &gh);
gfs2_holder_uninit(&gh);
struct gfs2_skip_data *data = opaque;
if (ip->i_no_addr == data->no_addr) {
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)){
+ if (inode->i_state & (I_FREEING|I_WILL_FREE)){
data->skipped = 1;
return 0;
}
static int __gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr)
{
+ struct inode *inode = &ip->i_inode;
struct buffer_head *dibh;
int error;
error = gfs2_meta_inode_buffer(ip, &dibh);
- if (!error) {
- error = inode_setattr(&ip->i_inode, attr);
- gfs2_assert_warn(GFS2_SB(&ip->i_inode), !error);
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
+ if (error)
+ return error;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
}
- return error;
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
+ gfs2_assert_warn(GFS2_SB(inode), !error);
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+ return 0;
}
/**
if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags))
goto skip_barrier;
get_bh(bh);
- submit_bh(WRITE_SYNC | (1 << BIO_RW_BARRIER) | (1 << BIO_RW_META), bh);
+ submit_bh(WRITE_BARRIER | REQ_META, bh);
wait_on_buffer(bh);
if (buffer_eopnotsupp(bh)) {
clear_buffer_eopnotsupp(bh);
lock_buffer(bh);
skip_barrier:
get_bh(bh);
- submit_bh(WRITE_SYNC | (1 << BIO_RW_META), bh);
+ submit_bh(WRITE_SYNC | REQ_META, bh);
wait_on_buffer(bh);
}
if (!buffer_uptodate(bh))
{
struct buffer_head *bh, *head;
int nr_underway = 0;
- int write_op = (1 << BIO_RW_META) | ((wbc->sync_mode == WB_SYNC_ALL ?
- WRITE_SYNC_PLUG : WRITE));
+ int write_op = REQ_META |
+ (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC_PLUG : WRITE);
BUG_ON(!PageLocked(page));
BUG_ON(!page_has_buffers(page));
}
bh->b_end_io = end_buffer_read_sync;
get_bh(bh);
- submit_bh(READ_SYNC | (1 << BIO_RW_META), bh);
+ submit_bh(READ_SYNC | REQ_META, bh);
if (!(flags & DIO_WAIT))
return 0;
if (buffer_uptodate(first_bh))
goto out;
if (!buffer_locked(first_bh))
- ll_rw_block(READ_SYNC | (1 << BIO_RW_META), 1, &first_bh);
+ ll_rw_block(READ_SYNC | REQ_META, 1, &first_bh);
dblock++;
extlen--;
bio->bi_end_io = end_bio_io_page;
bio->bi_private = page;
- submit_bio(READ_SYNC | (1 << BIO_RW_META), bio);
+ submit_bio(READ_SYNC | REQ_META, bio);
wait_on_page_locked(page);
bio_put(bio);
if (!PageUptodate(page)) {
}
/*
- * XXX: should be changed to have proper ordering by opencoding simple_setsize
+ * XXX(truncate): the truncate_setsize calls should be moved to the end.
*/
static int setattr_size(struct inode *inode, struct iattr *attr)
{
error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
if (error)
return error;
- error = simple_setsize(inode, attr->ia_size);
+ truncate_setsize(inode, attr->ia_size);
gfs2_trans_end(sdp);
- if (error)
- return error;
}
error = gfs2_truncatei(ip, attr->ia_size);
if (error)
goto out_end_trans;
- error = inode_setattr(inode, attr);
- gfs2_assert_warn(sdp, !error);
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ int error;
+
+ error = vmtruncate(inode, attr->ia_size);
+ gfs2_assert_warn(sdp, !error);
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
* node for later deallocation.
*/
-static void gfs2_drop_inode(struct inode *inode)
+static int gfs2_drop_inode(struct inode *inode)
{
struct gfs2_inode *ip = GFS2_I(inode);
if (gl && test_bit(GLF_DEMOTE, &gl->gl_flags))
clear_nlink(inode);
}
- generic_drop_inode(inode);
-}
-
-/**
- * gfs2_clear_inode - Deallocate an inode when VFS is done with it
- * @inode: The VFS inode
- *
- */
-
-static void gfs2_clear_inode(struct inode *inode)
-{
- struct gfs2_inode *ip = GFS2_I(inode);
-
- ip->i_gl->gl_object = NULL;
- gfs2_glock_put(ip->i_gl);
- ip->i_gl = NULL;
- if (ip->i_iopen_gh.gh_gl) {
- ip->i_iopen_gh.gh_gl->gl_object = NULL;
- gfs2_glock_dq_uninit(&ip->i_iopen_gh);
- }
+ return generic_drop_inode(inode);
}
static int is_ancestor(const struct dentry *d1, const struct dentry *d2)
* is safe, just less efficient.
*/
-static void gfs2_delete_inode(struct inode *inode)
+static void gfs2_evict_inode(struct inode *inode)
{
struct gfs2_sbd *sdp = inode->i_sb->s_fs_info;
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_holder gh;
int error;
+ if (inode->i_nlink)
+ goto out;
+
error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
if (unlikely(error)) {
gfs2_glock_dq_uninit(&ip->i_iopen_gh);
gfs2_holder_uninit(&ip->i_iopen_gh);
gfs2_glock_dq_uninit(&gh);
if (error && error != GLR_TRYFAILED && error != -EROFS)
- fs_warn(sdp, "gfs2_delete_inode: %d\n", error);
+ fs_warn(sdp, "gfs2_evict_inode: %d\n", error);
out:
truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ end_writeback(inode);
+
+ ip->i_gl->gl_object = NULL;
+ gfs2_glock_put(ip->i_gl);
+ ip->i_gl = NULL;
+ if (ip->i_iopen_gh.gh_gl) {
+ ip->i_iopen_gh.gh_gl->gl_object = NULL;
+ gfs2_glock_dq_uninit(&ip->i_iopen_gh);
+ }
}
static struct inode *gfs2_alloc_inode(struct super_block *sb)
.alloc_inode = gfs2_alloc_inode,
.destroy_inode = gfs2_destroy_inode,
.write_inode = gfs2_write_inode,
- .delete_inode = gfs2_delete_inode,
+ .evict_inode = gfs2_evict_inode,
.put_super = gfs2_put_super,
.sync_fs = gfs2_sync_fs,
.freeze_fs = gfs2_freeze,
.unfreeze_fs = gfs2_unfreeze,
.statfs = gfs2_statfs,
.remount_fs = gfs2_remount_fs,
- .clear_inode = gfs2_clear_inode,
.drop_inode = gfs2_drop_inode,
.show_options = gfs2_show_options,
};
int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data)
{
+ struct inode *inode = &ip->i_inode;
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_ea_location el;
struct buffer_head *dibh;
return error;
error = gfs2_meta_inode_buffer(ip, &dibh);
- if (!error) {
- error = inode_setattr(&ip->i_inode, attr);
- gfs2_assert_warn(GFS2_SB(&ip->i_inode), !error);
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
+ if (error)
+ goto out_trans_end;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ int error;
+
+ error = vmtruncate(inode, attr->ia_size);
+ gfs2_assert_warn(GFS2_SB(inode), !error);
}
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+
+out_trans_end:
gfs2_trans_end(sdp);
return error;
}
extern void hfs_inode_read_fork(struct inode *inode, struct hfs_extent *ext,
__be32 log_size, __be32 phys_size, u32 clump_size);
extern struct inode *hfs_iget(struct super_block *, struct hfs_cat_key *, hfs_cat_rec *);
-extern void hfs_clear_inode(struct inode *);
+extern void hfs_evict_inode(struct inode *);
extern void hfs_delete_inode(struct inode *);
/* attr.c */
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
hfs_get_block,
&HFS_I(mapping->host)->phys_size);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t hfs_bmap(struct address_space *mapping, sector_t block)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_path.dentry->d_inode->i_mapping->host;
+ ssize_t ret;
- return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs, hfs_get_block, NULL);
+
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+
+ return ret;
}
static int hfs_writepages(struct address_space *mapping,
return NULL;
}
-void hfs_clear_inode(struct inode *inode)
+void hfs_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
if (HFS_IS_RSRC(inode) && HFS_I(inode)->rsrc_inode) {
HFS_I(HFS_I(inode)->rsrc_inode)->rsrc_inode = NULL;
iput(HFS_I(inode)->rsrc_inode);
attr->ia_mode = inode->i_mode & ~S_IWUGO;
attr->ia_mode &= S_ISDIR(inode->i_mode) ? ~hsb->s_dir_umask: ~hsb->s_file_umask;
}
- error = inode_setattr(inode, attr);
- if (error)
- return error;
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
return 0;
}
+static int hfs_file_fsync(struct file *filp, int datasync)
+{
+ struct inode *inode = filp->f_mapping->host;
+ struct super_block * sb;
+ int ret, err;
+
+ /* sync the inode to buffers */
+ ret = write_inode_now(inode, 0);
+
+ /* sync the superblock to buffers */
+ sb = inode->i_sb;
+ if (sb->s_dirt) {
+ lock_super(sb);
+ sb->s_dirt = 0;
+ if (!(sb->s_flags & MS_RDONLY))
+ hfs_mdb_commit(sb);
+ unlock_super(sb);
+ }
+ /* .. finally sync the buffers to disk */
+ err = sync_blockdev(sb->s_bdev);
+ if (!ret)
+ ret = err;
+ return ret;
+}
static const struct file_operations hfs_file_operations = {
.llseek = generic_file_llseek,
.aio_write = generic_file_aio_write,
.mmap = generic_file_mmap,
.splice_read = generic_file_splice_read,
- .fsync = file_fsync,
+ .fsync = hfs_file_fsync,
.open = hfs_file_open,
.release = hfs_file_release,
};
.alloc_inode = hfs_alloc_inode,
.destroy_inode = hfs_destroy_inode,
.write_inode = hfs_write_inode,
- .clear_inode = hfs_clear_inode,
+ .evict_inode = hfs_evict_inode,
.put_super = hfs_put_super,
.write_super = hfs_write_super,
.sync_fs = hfs_sync_fs,
/* super.c */
struct inode *hfsplus_iget(struct super_block *, unsigned long);
+int hfsplus_sync_fs(struct super_block *sb, int wait);
/* tables.c */
extern u16 hfsplus_case_fold_table[];
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
hfsplus_get_block,
&HFSPLUS_I(mapping->host).phys_size);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t hfsplus_bmap(struct address_space *mapping, sector_t block)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_path.dentry->d_inode->i_mapping->host;
+ ssize_t ret;
- return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs, hfsplus_get_block, NULL);
+
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+
+ return ret;
}
static int hfsplus_writepages(struct address_space *mapping,
return 0;
}
+static int hfsplus_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
+}
+
+static int hfsplus_file_fsync(struct file *filp, int datasync)
+{
+ struct inode *inode = filp->f_mapping->host;
+ struct super_block * sb;
+ int ret, err;
+
+ /* sync the inode to buffers */
+ ret = write_inode_now(inode, 0);
+
+ /* sync the superblock to buffers */
+ sb = inode->i_sb;
+ if (sb->s_dirt) {
+ if (!(sb->s_flags & MS_RDONLY))
+ hfsplus_sync_fs(sb, 1);
+ else
+ sb->s_dirt = 0;
+ }
+
+ /* .. finally sync the buffers to disk */
+ err = sync_blockdev(sb->s_bdev);
+ if (!ret)
+ ret = err;
+ return ret;
+}
+
static const struct inode_operations hfsplus_file_inode_operations = {
.lookup = hfsplus_file_lookup,
.truncate = hfsplus_file_truncate,
+ .setattr = hfsplus_setattr,
.setxattr = hfsplus_setxattr,
.getxattr = hfsplus_getxattr,
.listxattr = hfsplus_listxattr,
.aio_write = generic_file_aio_write,
.mmap = generic_file_mmap,
.splice_read = generic_file_splice_read,
- .fsync = file_fsync,
+ .fsync = hfsplus_file_fsync,
.open = hfsplus_file_open,
.release = hfsplus_file_release,
.unlocked_ioctl = hfsplus_ioctl,
return ret;
}
-static void hfsplus_clear_inode(struct inode *inode)
+static void hfsplus_evict_inode(struct inode *inode)
{
- dprint(DBG_INODE, "hfsplus_clear_inode: %lu\n", inode->i_ino);
+ dprint(DBG_INODE, "hfsplus_evict_inode: %lu\n", inode->i_ino);
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
if (HFSPLUS_IS_RSRC(inode)) {
HFSPLUS_I(HFSPLUS_I(inode).rsrc_inode).rsrc_inode = NULL;
iput(HFSPLUS_I(inode).rsrc_inode);
}
}
-static int hfsplus_sync_fs(struct super_block *sb, int wait)
+int hfsplus_sync_fs(struct super_block *sb, int wait)
{
struct hfsplus_vh *vhdr = HFSPLUS_SB(sb).s_vhdr;
.alloc_inode = hfsplus_alloc_inode,
.destroy_inode = hfsplus_destroy_inode,
.write_inode = hfsplus_write_inode,
- .clear_inode = hfsplus_clear_inode,
+ .evict_inode = hfsplus_evict_inode,
.put_super = hfsplus_put_super,
.write_super = hfsplus_write_super,
.sync_fs = hfsplus_sync_fs,
struct timespec ia_ctime;
};
-extern int stat_file(const char *path, unsigned long long *inode_out,
- int *mode_out, int *nlink_out, int *uid_out, int *gid_out,
- unsigned long long *size_out, struct timespec *atime_out,
- struct timespec *mtime_out, struct timespec *ctime_out,
- int *blksize_out, unsigned long long *blocks_out, int fd);
+struct hostfs_stat {
+ unsigned long long ino;
+ unsigned int mode;
+ unsigned int nlink;
+ unsigned int uid;
+ unsigned int gid;
+ unsigned long long size;
+ struct timespec atime, mtime, ctime;
+ unsigned int blksize;
+ unsigned long long blocks;
+ unsigned int maj;
+ unsigned int min;
+};
+
+extern int stat_file(const char *path, struct hostfs_stat *p, int fd);
extern int access_file(char *path, int r, int w, int x);
extern int open_file(char *path, int r, int w, int append);
-extern int file_type(const char *path, int *maj, int *min);
extern void *open_dir(char *path, int *err_out);
extern char *read_dir(void *stream, unsigned long long *pos,
unsigned long long *ino_out, int *len_out);
extern void close_file(void *stream);
+extern int replace_file(int oldfd, int fd);
extern void close_dir(void *stream);
extern int read_file(int fd, unsigned long long *offset, char *buf, int len);
extern int write_file(int fd, unsigned long long *offset, const char *buf,
#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/mount.h>
+#include <linux/namei.h>
#include "hostfs.h"
#include "init.h"
#include "kern.h"
struct hostfs_inode_info {
- char *host_filename;
int fd;
fmode_t mode;
struct inode vfs_inode;
static const struct inode_operations hostfs_iops;
static const struct inode_operations hostfs_dir_iops;
-static const struct address_space_operations hostfs_link_aops;
+static const struct inode_operations hostfs_link_iops;
#ifndef MODULE
static int __init hostfs_args(char *options, int *add)
);
#endif
-static char *dentry_name(struct dentry *dentry, int extra)
+static char *__dentry_name(struct dentry *dentry, char *name)
{
- struct dentry *parent;
- char *root, *name;
- int len;
-
- len = 0;
- parent = dentry;
- while (parent->d_parent != parent) {
- len += parent->d_name.len + 1;
- parent = parent->d_parent;
- }
+ char *p = __dentry_path(dentry, name, PATH_MAX);
+ char *root;
+ size_t len;
- root = HOSTFS_I(parent->d_inode)->host_filename;
- len += strlen(root);
- name = kmalloc(len + extra + 1, GFP_KERNEL);
- if (name == NULL)
- return NULL;
+ spin_unlock(&dcache_lock);
- name[len] = '\0';
- parent = dentry;
- while (parent->d_parent != parent) {
- len -= parent->d_name.len + 1;
- name[len] = '/';
- strncpy(&name[len + 1], parent->d_name.name,
- parent->d_name.len);
- parent = parent->d_parent;
+ root = dentry->d_sb->s_fs_info;
+ len = strlen(root);
+ if (IS_ERR(p)) {
+ __putname(name);
+ return NULL;
+ }
+ strlcpy(name, root, PATH_MAX);
+ if (len > p - name) {
+ __putname(name);
+ return NULL;
+ }
+ if (p > name + len) {
+ char *s = name + len;
+ while ((*s++ = *p++) != '\0')
+ ;
}
- strncpy(name, root, strlen(root));
return name;
}
-static char *inode_name(struct inode *ino, int extra)
+static char *dentry_name(struct dentry *dentry)
{
- struct dentry *dentry;
+ char *name = __getname();
+ if (!name)
+ return NULL;
- dentry = list_entry(ino->i_dentry.next, struct dentry, d_alias);
- return dentry_name(dentry, extra);
+ spin_lock(&dcache_lock);
+ return __dentry_name(dentry, name); /* will unlock */
}
-static int read_name(struct inode *ino, char *name)
+static char *inode_name(struct inode *ino)
{
- /*
- * The non-int inode fields are copied into ints by stat_file and
- * then copied into the inode because passing the actual pointers
- * in and having them treated as int * breaks on big-endian machines
- */
- int err;
- int i_mode, i_nlink, i_blksize;
- unsigned long long i_size;
- unsigned long long i_ino;
- unsigned long long i_blocks;
-
- err = stat_file(name, &i_ino, &i_mode, &i_nlink, &ino->i_uid,
- &ino->i_gid, &i_size, &ino->i_atime, &ino->i_mtime,
- &ino->i_ctime, &i_blksize, &i_blocks, -1);
- if (err)
- return err;
+ struct dentry *dentry;
+ char *name = __getname();
+ if (!name)
+ return NULL;
- ino->i_ino = i_ino;
- ino->i_mode = i_mode;
- ino->i_nlink = i_nlink;
- ino->i_size = i_size;
- ino->i_blocks = i_blocks;
- return 0;
+ spin_lock(&dcache_lock);
+ if (list_empty(&ino->i_dentry)) {
+ spin_unlock(&dcache_lock);
+ __putname(name);
+ return NULL;
+ }
+ dentry = list_first_entry(&ino->i_dentry, struct dentry, d_alias);
+ return __dentry_name(dentry, name); /* will unlock */
}
static char *follow_link(char *link)
return ERR_PTR(n);
}
-static int hostfs_read_inode(struct inode *ino)
-{
- char *name;
- int err = 0;
-
- /*
- * Unfortunately, we are called from iget() when we don't have a dentry
- * allocated yet.
- */
- if (list_empty(&ino->i_dentry))
- goto out;
-
- err = -ENOMEM;
- name = inode_name(ino, 0);
- if (name == NULL)
- goto out;
-
- if (file_type(name, NULL, NULL) == OS_TYPE_SYMLINK) {
- name = follow_link(name);
- if (IS_ERR(name)) {
- err = PTR_ERR(name);
- goto out;
- }
- }
-
- err = read_name(ino, name);
- kfree(name);
- out:
- return err;
-}
-
static struct inode *hostfs_iget(struct super_block *sb)
{
- struct inode *inode;
- long ret;
-
- inode = iget_locked(sb, 0);
+ struct inode *inode = new_inode(sb);
if (!inode)
return ERR_PTR(-ENOMEM);
- if (inode->i_state & I_NEW) {
- ret = hostfs_read_inode(inode);
- if (ret < 0) {
- iget_failed(inode);
- return ERR_PTR(ret);
- }
- unlock_new_inode(inode);
- }
return inode;
}
long long f_files;
long long f_ffree;
- err = do_statfs(HOSTFS_I(dentry->d_sb->s_root->d_inode)->host_filename,
+ err = do_statfs(dentry->d_sb->s_fs_info,
&sf->f_bsize, &f_blocks, &f_bfree, &f_bavail, &f_files,
&f_ffree, &sf->f_fsid, sizeof(sf->f_fsid),
&sf->f_namelen, sf->f_spare);
{
struct hostfs_inode_info *hi;
- hi = kmalloc(sizeof(*hi), GFP_KERNEL);
+ hi = kzalloc(sizeof(*hi), GFP_KERNEL);
if (hi == NULL)
return NULL;
-
- *hi = ((struct hostfs_inode_info) { .host_filename = NULL,
- .fd = -1,
- .mode = 0 });
+ hi->fd = -1;
inode_init_once(&hi->vfs_inode);
return &hi->vfs_inode;
}
-static void hostfs_delete_inode(struct inode *inode)
+static void hostfs_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
if (HOSTFS_I(inode)->fd != -1) {
close_file(&HOSTFS_I(inode)->fd);
HOSTFS_I(inode)->fd = -1;
}
- clear_inode(inode);
}
static void hostfs_destroy_inode(struct inode *inode)
{
- kfree(HOSTFS_I(inode)->host_filename);
-
- /*
- * XXX: This should not happen, probably. The check is here for
- * additional safety.
- */
- if (HOSTFS_I(inode)->fd != -1) {
- close_file(&HOSTFS_I(inode)->fd);
- printk(KERN_DEBUG "Closing host fd in .destroy_inode\n");
- }
-
kfree(HOSTFS_I(inode));
}
static int hostfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
{
- struct inode *root = vfs->mnt_sb->s_root->d_inode;
- const char *root_path = HOSTFS_I(root)->host_filename;
+ const char *root_path = vfs->mnt_sb->s_fs_info;
size_t offset = strlen(root_ino) + 1;
if (strlen(root_path) > offset)
static const struct super_operations hostfs_sbops = {
.alloc_inode = hostfs_alloc_inode,
- .drop_inode = generic_delete_inode,
- .delete_inode = hostfs_delete_inode,
.destroy_inode = hostfs_destroy_inode,
+ .evict_inode = hostfs_evict_inode,
.statfs = hostfs_statfs,
.show_options = hostfs_show_options,
};
unsigned long long next, ino;
int error, len;
- name = dentry_name(file->f_path.dentry, 0);
+ name = dentry_name(file->f_path.dentry);
if (name == NULL)
return -ENOMEM;
dir = open_dir(name, &error);
- kfree(name);
+ __putname(name);
if (dir == NULL)
return -error;
next = file->f_pos;
int hostfs_file_open(struct inode *ino, struct file *file)
{
+ static DEFINE_MUTEX(open_mutex);
char *name;
fmode_t mode = 0;
+ int err;
int r = 0, w = 0, fd;
mode = file->f_mode & (FMODE_READ | FMODE_WRITE);
if ((mode & HOSTFS_I(ino)->mode) == mode)
return 0;
- /*
- * The file may already have been opened, but with the wrong access,
- * so this resets things and reopens the file with the new access.
- */
- if (HOSTFS_I(ino)->fd != -1) {
- close_file(&HOSTFS_I(ino)->fd);
- HOSTFS_I(ino)->fd = -1;
- }
+ mode |= HOSTFS_I(ino)->mode;
- HOSTFS_I(ino)->mode |= mode;
- if (HOSTFS_I(ino)->mode & FMODE_READ)
+retry:
+ if (mode & FMODE_READ)
r = 1;
- if (HOSTFS_I(ino)->mode & FMODE_WRITE)
+ if (mode & FMODE_WRITE)
w = 1;
if (w)
r = 1;
- name = dentry_name(file->f_path.dentry, 0);
+ name = dentry_name(file->f_path.dentry);
if (name == NULL)
return -ENOMEM;
fd = open_file(name, r, w, append);
- kfree(name);
+ __putname(name);
if (fd < 0)
return fd;
- FILE_HOSTFS_I(file)->fd = fd;
+
+ mutex_lock(&open_mutex);
+ /* somebody else had handled it first? */
+ if ((mode & HOSTFS_I(ino)->mode) == mode) {
+ mutex_unlock(&open_mutex);
+ return 0;
+ }
+ if ((mode | HOSTFS_I(ino)->mode) != mode) {
+ mode |= HOSTFS_I(ino)->mode;
+ mutex_unlock(&open_mutex);
+ close_file(&fd);
+ goto retry;
+ }
+ if (HOSTFS_I(ino)->fd == -1) {
+ HOSTFS_I(ino)->fd = fd;
+ } else {
+ err = replace_file(fd, HOSTFS_I(ino)->fd);
+ close_file(&fd);
+ if (err < 0) {
+ mutex_unlock(&open_mutex);
+ return err;
+ }
+ }
+ HOSTFS_I(ino)->mode = mode;
+ mutex_unlock(&open_mutex);
return 0;
}
.write_end = hostfs_write_end,
};
-static int init_inode(struct inode *inode, struct dentry *dentry)
+static int read_name(struct inode *ino, char *name)
{
- char *name;
- int type, err = -ENOMEM;
- int maj, min;
- dev_t rdev = 0;
+ dev_t rdev;
+ struct hostfs_stat st;
+ int err = stat_file(name, &st, -1);
+ if (err)
+ return err;
- if (dentry) {
- name = dentry_name(dentry, 0);
- if (name == NULL)
- goto out;
- type = file_type(name, &maj, &min);
- /* Reencode maj and min with the kernel encoding.*/
- rdev = MKDEV(maj, min);
- kfree(name);
- }
- else type = OS_TYPE_DIR;
+ /* Reencode maj and min with the kernel encoding.*/
+ rdev = MKDEV(st.maj, st.min);
- err = 0;
- if (type == OS_TYPE_SYMLINK)
- inode->i_op = &page_symlink_inode_operations;
- else if (type == OS_TYPE_DIR)
- inode->i_op = &hostfs_dir_iops;
- else inode->i_op = &hostfs_iops;
-
- if (type == OS_TYPE_DIR) inode->i_fop = &hostfs_dir_fops;
- else inode->i_fop = &hostfs_file_fops;
-
- if (type == OS_TYPE_SYMLINK)
- inode->i_mapping->a_ops = &hostfs_link_aops;
- else inode->i_mapping->a_ops = &hostfs_aops;
-
- switch (type) {
- case OS_TYPE_CHARDEV:
- init_special_inode(inode, S_IFCHR, rdev);
+ switch (st.mode & S_IFMT) {
+ case S_IFLNK:
+ ino->i_op = &hostfs_link_iops;
break;
- case OS_TYPE_BLOCKDEV:
- init_special_inode(inode, S_IFBLK, rdev);
+ case S_IFDIR:
+ ino->i_op = &hostfs_dir_iops;
+ ino->i_fop = &hostfs_dir_fops;
break;
- case OS_TYPE_FIFO:
- init_special_inode(inode, S_IFIFO, 0);
+ case S_IFCHR:
+ case S_IFBLK:
+ case S_IFIFO:
+ case S_IFSOCK:
+ init_special_inode(ino, st.mode & S_IFMT, rdev);
+ ino->i_op = &hostfs_iops;
break;
- case OS_TYPE_SOCK:
- init_special_inode(inode, S_IFSOCK, 0);
- break;
- }
- out:
- return err;
+
+ default:
+ ino->i_op = &hostfs_iops;
+ ino->i_fop = &hostfs_file_fops;
+ ino->i_mapping->a_ops = &hostfs_aops;
+ }
+
+ ino->i_ino = st.ino;
+ ino->i_mode = st.mode;
+ ino->i_nlink = st.nlink;
+ ino->i_uid = st.uid;
+ ino->i_gid = st.gid;
+ ino->i_atime = st.atime;
+ ino->i_mtime = st.mtime;
+ ino->i_ctime = st.ctime;
+ ino->i_size = st.size;
+ ino->i_blocks = st.blocks;
+ return 0;
}
int hostfs_create(struct inode *dir, struct dentry *dentry, int mode,
goto out;
}
- error = init_inode(inode, dentry);
- if (error)
- goto out_put;
-
error = -ENOMEM;
- name = dentry_name(dentry, 0);
+ name = dentry_name(dentry);
if (name == NULL)
goto out_put;
mode & S_IROTH, mode & S_IWOTH, mode & S_IXOTH);
if (fd < 0)
error = fd;
- else error = read_name(inode, name);
+ else
+ error = read_name(inode, name);
- kfree(name);
+ __putname(name);
if (error)
goto out_put;
goto out;
}
- err = init_inode(inode, dentry);
- if (err)
- goto out_put;
-
err = -ENOMEM;
- name = dentry_name(dentry, 0);
+ name = dentry_name(dentry);
if (name == NULL)
goto out_put;
err = read_name(inode, name);
- kfree(name);
+
+ __putname(name);
if (err == -ENOENT) {
iput(inode);
inode = NULL;
return ERR_PTR(err);
}
-static char *inode_dentry_name(struct inode *ino, struct dentry *dentry)
-{
- char *file;
- int len;
-
- file = inode_name(ino, dentry->d_name.len + 1);
- if (file == NULL)
- return NULL;
- strcat(file, "/");
- len = strlen(file);
- strncat(file, dentry->d_name.name, dentry->d_name.len);
- file[len + dentry->d_name.len] = '\0';
- return file;
-}
-
int hostfs_link(struct dentry *to, struct inode *ino, struct dentry *from)
{
char *from_name, *to_name;
int err;
- if ((from_name = inode_dentry_name(ino, from)) == NULL)
+ if ((from_name = dentry_name(from)) == NULL)
return -ENOMEM;
- to_name = dentry_name(to, 0);
+ to_name = dentry_name(to);
if (to_name == NULL) {
- kfree(from_name);
+ __putname(from_name);
return -ENOMEM;
}
err = link_file(to_name, from_name);
- kfree(from_name);
- kfree(to_name);
+ __putname(from_name);
+ __putname(to_name);
return err;
}
char *file;
int err;
- if ((file = inode_dentry_name(ino, dentry)) == NULL)
- return -ENOMEM;
if (append)
return -EPERM;
+ if ((file = dentry_name(dentry)) == NULL)
+ return -ENOMEM;
+
err = unlink_file(file);
- kfree(file);
+ __putname(file);
return err;
}
char *file;
int err;
- if ((file = inode_dentry_name(ino, dentry)) == NULL)
+ if ((file = dentry_name(dentry)) == NULL)
return -ENOMEM;
err = make_symlink(file, to);
- kfree(file);
+ __putname(file);
return err;
}
char *file;
int err;
- if ((file = inode_dentry_name(ino, dentry)) == NULL)
+ if ((file = dentry_name(dentry)) == NULL)
return -ENOMEM;
err = do_mkdir(file, mode);
- kfree(file);
+ __putname(file);
return err;
}
char *file;
int err;
- if ((file = inode_dentry_name(ino, dentry)) == NULL)
+ if ((file = dentry_name(dentry)) == NULL)
return -ENOMEM;
err = do_rmdir(file);
- kfree(file);
+ __putname(file);
return err;
}
goto out;
}
- err = init_inode(inode, dentry);
- if (err)
- goto out_put;
-
err = -ENOMEM;
- name = dentry_name(dentry, 0);
+ name = dentry_name(dentry);
if (name == NULL)
goto out_put;
init_special_inode(inode, mode, dev);
err = do_mknod(name, mode, MAJOR(dev), MINOR(dev));
- if (err)
+ if (!err)
goto out_free;
err = read_name(inode, name);
- kfree(name);
+ __putname(name);
+ if (err)
+ goto out_put;
if (err)
goto out_put;
return 0;
out_free:
- kfree(name);
+ __putname(name);
out_put:
iput(inode);
out:
char *from_name, *to_name;
int err;
- if ((from_name = inode_dentry_name(from_ino, from)) == NULL)
+ if ((from_name = dentry_name(from)) == NULL)
return -ENOMEM;
- if ((to_name = inode_dentry_name(to_ino, to)) == NULL) {
- kfree(from_name);
+ if ((to_name = dentry_name(to)) == NULL) {
+ __putname(from_name);
return -ENOMEM;
}
err = rename_file(from_name, to_name);
- kfree(from_name);
- kfree(to_name);
+ __putname(from_name);
+ __putname(to_name);
return err;
}
if (desired & MAY_READ) r = 1;
if (desired & MAY_WRITE) w = 1;
if (desired & MAY_EXEC) x = 1;
- name = inode_name(ino, 0);
+ name = inode_name(ino);
if (name == NULL)
return -ENOMEM;
err = 0;
else
err = access_file(name, r, w, x);
- kfree(name);
+ __putname(name);
if (!err)
err = generic_permission(ino, desired, NULL);
return err;
int hostfs_setattr(struct dentry *dentry, struct iattr *attr)
{
+ struct inode *inode = dentry->d_inode;
struct hostfs_iattr attrs;
char *name;
int err;
- int fd = HOSTFS_I(dentry->d_inode)->fd;
+ int fd = HOSTFS_I(inode)->fd;
- err = inode_change_ok(dentry->d_inode, attr);
+ err = inode_change_ok(inode, attr);
if (err)
return err;
if (attr->ia_valid & ATTR_MTIME_SET) {
attrs.ia_valid |= HOSTFS_ATTR_MTIME_SET;
}
- name = dentry_name(dentry, 0);
+ name = dentry_name(dentry);
if (name == NULL)
return -ENOMEM;
err = set_attr(name, &attrs, fd);
- kfree(name);
+ __putname(name);
if (err)
return err;
- return inode_setattr(dentry->d_inode, attr);
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ int error;
+
+ error = vmtruncate(inode, attr->ia_size);
+ if (err)
+ return err;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
static const struct inode_operations hostfs_iops = {
.setattr = hostfs_setattr,
};
-int hostfs_link_readpage(struct file *file, struct page *page)
-{
- char *buffer, *name;
- int err;
-
- buffer = kmap(page);
- name = inode_name(page->mapping->host, 0);
- if (name == NULL)
- return -ENOMEM;
- err = hostfs_do_readlink(name, buffer, PAGE_CACHE_SIZE);
- kfree(name);
- if (err == PAGE_CACHE_SIZE)
- err = -E2BIG;
- else if (err > 0) {
- flush_dcache_page(page);
- SetPageUptodate(page);
- if (PageError(page)) ClearPageError(page);
- err = 0;
+static void *hostfs_follow_link(struct dentry *dentry, struct nameidata *nd)
+{
+ char *link = __getname();
+ if (link) {
+ char *path = dentry_name(dentry);
+ int err = -ENOMEM;
+ if (path) {
+ err = hostfs_do_readlink(path, link, PATH_MAX);
+ if (err == PATH_MAX)
+ err = -E2BIG;
+ __putname(path);
+ }
+ if (err < 0) {
+ __putname(link);
+ link = ERR_PTR(err);
+ }
+ } else {
+ link = ERR_PTR(-ENOMEM);
}
- kunmap(page);
- unlock_page(page);
- return err;
+
+ nd_set_link(nd, link);
+ return NULL;
}
-static const struct address_space_operations hostfs_link_aops = {
- .readpage = hostfs_link_readpage,
+static void hostfs_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
+{
+ char *s = nd_get_link(nd);
+ if (!IS_ERR(s))
+ __putname(s);
+}
+
+static const struct inode_operations hostfs_link_iops = {
+ .readlink = generic_readlink,
+ .follow_link = hostfs_follow_link,
+ .put_link = hostfs_put_link,
};
static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent)
req_root = "";
err = -ENOMEM;
- host_root_path = kmalloc(strlen(root_ino) + 1
- + strlen(req_root) + 1, GFP_KERNEL);
+ sb->s_fs_info = host_root_path =
+ kmalloc(strlen(root_ino) + strlen(req_root) + 2, GFP_KERNEL);
if (host_root_path == NULL)
goto out;
sprintf(host_root_path, "%s/%s", root_ino, req_root);
- root_inode = hostfs_iget(sb);
- if (IS_ERR(root_inode)) {
- err = PTR_ERR(root_inode);
- goto out_free;
- }
+ root_inode = new_inode(sb);
+ if (!root_inode)
+ goto out;
- err = init_inode(root_inode, NULL);
+ err = read_name(root_inode, host_root_path);
if (err)
goto out_put;
- HOSTFS_I(root_inode)->host_filename = host_root_path;
- /*
- * Avoid that in the error path, iput(root_inode) frees again
- * host_root_path through hostfs_destroy_inode!
- */
- host_root_path = NULL;
+ if (S_ISLNK(root_inode->i_mode)) {
+ char *name = follow_link(host_root_path);
+ if (IS_ERR(name))
+ err = PTR_ERR(name);
+ else
+ err = read_name(root_inode, name);
+ kfree(name);
+ if (err)
+ goto out_put;
+ }
err = -ENOMEM;
sb->s_root = d_alloc_root(root_inode);
if (sb->s_root == NULL)
goto out_put;
- err = hostfs_read_inode(root_inode);
- if (err) {
- /* No iput in this case because the dput does that for us */
- dput(sb->s_root);
- sb->s_root = NULL;
- goto out;
- }
-
return 0;
out_put:
iput(root_inode);
-out_free:
- kfree(host_root_path);
out:
return err;
}
return get_sb_nodev(type, flags, data, hostfs_fill_sb_common, mnt);
}
+static void hostfs_kill_sb(struct super_block *s)
+{
+ kill_anon_super(s);
+ kfree(s->s_fs_info);
+}
+
static struct file_system_type hostfs_type = {
.owner = THIS_MODULE,
.name = "hostfs",
.get_sb = hostfs_read_sb,
- .kill_sb = kill_anon_super,
+ .kill_sb = hostfs_kill_sb,
.fs_flags = 0,
};
#include "user.h"
#include <utime.h>
-int stat_file(const char *path, unsigned long long *inode_out, int *mode_out,
- int *nlink_out, int *uid_out, int *gid_out,
- unsigned long long *size_out, struct timespec *atime_out,
- struct timespec *mtime_out, struct timespec *ctime_out,
- int *blksize_out, unsigned long long *blocks_out, int fd)
+static void stat64_to_hostfs(const struct stat64 *buf, struct hostfs_stat *p)
+{
+ p->ino = buf->st_ino;
+ p->mode = buf->st_mode;
+ p->nlink = buf->st_nlink;
+ p->uid = buf->st_uid;
+ p->gid = buf->st_gid;
+ p->size = buf->st_size;
+ p->atime.tv_sec = buf->st_atime;
+ p->atime.tv_nsec = 0;
+ p->ctime.tv_sec = buf->st_ctime;
+ p->ctime.tv_nsec = 0;
+ p->mtime.tv_sec = buf->st_mtime;
+ p->mtime.tv_nsec = 0;
+ p->blksize = buf->st_blksize;
+ p->blocks = buf->st_blocks;
+ p->maj = os_major(buf->st_rdev);
+ p->min = os_minor(buf->st_rdev);
+}
+
+int stat_file(const char *path, struct hostfs_stat *p, int fd)
{
struct stat64 buf;
} else if (lstat64(path, &buf) < 0) {
return -errno;
}
-
- if (inode_out != NULL)
- *inode_out = buf.st_ino;
- if (mode_out != NULL)
- *mode_out = buf.st_mode;
- if (nlink_out != NULL)
- *nlink_out = buf.st_nlink;
- if (uid_out != NULL)
- *uid_out = buf.st_uid;
- if (gid_out != NULL)
- *gid_out = buf.st_gid;
- if (size_out != NULL)
- *size_out = buf.st_size;
- if (atime_out != NULL) {
- atime_out->tv_sec = buf.st_atime;
- atime_out->tv_nsec = 0;
- }
- if (mtime_out != NULL) {
- mtime_out->tv_sec = buf.st_mtime;
- mtime_out->tv_nsec = 0;
- }
- if (ctime_out != NULL) {
- ctime_out->tv_sec = buf.st_ctime;
- ctime_out->tv_nsec = 0;
- }
- if (blksize_out != NULL)
- *blksize_out = buf.st_blksize;
- if (blocks_out != NULL)
- *blocks_out = buf.st_blocks;
+ stat64_to_hostfs(&buf, p);
return 0;
}
-int file_type(const char *path, int *maj, int *min)
-{
- struct stat64 buf;
-
- if (lstat64(path, &buf) < 0)
- return -errno;
- /*
- * We cannot pass rdev as is because glibc and the kernel disagree
- * about its definition.
- */
- if (maj != NULL)
- *maj = major(buf.st_rdev);
- if (min != NULL)
- *min = minor(buf.st_rdev);
-
- if (S_ISDIR(buf.st_mode))
- return OS_TYPE_DIR;
- else if (S_ISLNK(buf.st_mode))
- return OS_TYPE_SYMLINK;
- else if (S_ISCHR(buf.st_mode))
- return OS_TYPE_CHARDEV;
- else if (S_ISBLK(buf.st_mode))
- return OS_TYPE_BLOCKDEV;
- else if (S_ISFIFO(buf.st_mode))
- return OS_TYPE_FIFO;
- else if (S_ISSOCK(buf.st_mode))
- return OS_TYPE_SOCK;
- else return OS_TYPE_FILE;
-}
-
int access_file(char *path, int r, int w, int x)
{
int mode = 0;
return 0;
}
+int replace_file(int oldfd, int fd)
+{
+ return dup2(oldfd, fd);
+}
+
void close_file(void *stream)
{
close(*((int *) stream));
int set_attr(const char *file, struct hostfs_iattr *attrs, int fd)
{
+ struct hostfs_stat st;
struct timeval times[2];
- struct timespec atime_ts, mtime_ts;
int err, ma;
if (attrs->ia_valid & HOSTFS_ATTR_MODE) {
*/
ma = (HOSTFS_ATTR_ATIME_SET | HOSTFS_ATTR_MTIME_SET);
if (attrs->ia_valid & ma) {
- err = stat_file(file, NULL, NULL, NULL, NULL, NULL, NULL,
- &atime_ts, &mtime_ts, NULL, NULL, NULL, fd);
+ err = stat_file(file, &st, fd);
if (err != 0)
return err;
- times[0].tv_sec = atime_ts.tv_sec;
- times[0].tv_usec = atime_ts.tv_nsec / 1000;
- times[1].tv_sec = mtime_ts.tv_sec;
- times[1].tv_usec = mtime_ts.tv_nsec / 1000;
+ times[0].tv_sec = st.atime.tv_sec;
+ times[0].tv_usec = st.atime.tv_nsec / 1000;
+ times[1].tv_sec = st.mtime.tv_sec;
+ times[1].tv_usec = st.mtime.tv_nsec / 1000;
if (attrs->ia_valid & HOSTFS_ATTR_ATIME_SET) {
times[0].tv_sec = attrs->ia_atime.tv_sec;
/* Note: ctime is not handled */
if (attrs->ia_valid & (HOSTFS_ATTR_ATIME | HOSTFS_ATTR_MTIME)) {
- err = stat_file(file, NULL, NULL, NULL, NULL, NULL, NULL,
- &attrs->ia_atime, &attrs->ia_mtime, NULL,
- NULL, NULL, fd);
+ err = stat_file(file, &st, fd);
+ attrs->ia_atime = st.atime;
+ attrs->ia_mtime = st.mtime;
if (err != 0)
return err;
}
{
int err;
- err = mknod(file, mode, makedev(major, minor));
+ err = mknod(file, mode, os_makedev(major, minor));
if (err)
return -errno;
return 0;
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
hpfs_get_block,
&hpfs_i(mapping->host)->mmu_private);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t _hpfs_bmap(struct address_space *mapping, sector_t block)
void hpfs_write_inode_nolock(struct inode *);
int hpfs_setattr(struct dentry *, struct iattr *);
void hpfs_write_if_changed(struct inode *);
-void hpfs_delete_inode(struct inode *);
+void hpfs_evict_inode(struct inode *);
/* map.c */
if (error)
goto out_unlock;
- error = inode_setattr(inode, attr);
- if (error)
- goto out_unlock;
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
hpfs_write_inode(inode);
hpfs_write_inode(inode);
}
-void hpfs_delete_inode(struct inode *inode)
+void hpfs_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
- lock_kernel();
- hpfs_remove_fnode(inode->i_sb, inode->i_ino);
- unlock_kernel();
- clear_inode(inode);
+ end_writeback(inode);
+ if (!inode->i_nlink) {
+ lock_kernel();
+ hpfs_remove_fnode(inode->i_sb, inode->i_ino);
+ unlock_kernel();
+ }
}
{
.alloc_inode = hpfs_alloc_inode,
.destroy_inode = hpfs_destroy_inode,
- .delete_inode = hpfs_delete_inode,
+ .evict_inode = hpfs_evict_inode,
.put_super = hpfs_put_super,
.statfs = hpfs_statfs,
.remount_fs = hpfs_remount_fs,
#include <linux/slab.h>
#include <linux/statfs.h>
#include <linux/types.h>
+#include <linux/pid_namespace.h>
#include <asm/uaccess.h>
#include "os.h"
return &hi->vfs_inode;
}
-void hppfs_delete_inode(struct inode *ino)
+void hppfs_evict_inode(struct inode *ino)
{
+ end_writeback(ino);
dput(HPPFS_I(ino)->proc_dentry);
mntput(ino->i_sb->s_fs_info);
-
- clear_inode(ino);
}
static void hppfs_destroy_inode(struct inode *inode)
static const struct super_operations hppfs_sbops = {
.alloc_inode = hppfs_alloc_inode,
.destroy_inode = hppfs_destroy_inode,
- .delete_inode = hppfs_delete_inode,
+ .evict_inode = hppfs_evict_inode,
.statfs = hppfs_statfs,
};
hugetlb_unreserve_pages(inode, start, freed);
}
-static void hugetlbfs_delete_inode(struct inode *inode)
+static void hugetlbfs_evict_inode(struct inode *inode)
{
truncate_hugepages(inode, 0);
- clear_inode(inode);
-}
-
-static void hugetlbfs_forget_inode(struct inode *inode) __releases(inode_lock)
-{
- if (generic_detach_inode(inode)) {
- truncate_hugepages(inode, 0);
- clear_inode(inode);
- destroy_inode(inode);
- }
-}
-
-static void hugetlbfs_drop_inode(struct inode *inode)
-{
- if (!inode->i_nlink)
- generic_delete_inode(inode);
- else
- hugetlbfs_forget_inode(inode);
+ end_writeback(inode);
}
static inline void
error = inode_change_ok(inode, attr);
if (error)
- goto out;
+ return error;
if (ia_valid & ATTR_SIZE) {
error = -EINVAL;
- if (!(attr->ia_size & ~huge_page_mask(h)))
- error = hugetlb_vmtruncate(inode, attr->ia_size);
+ if (attr->ia_size & ~huge_page_mask(h))
+ return -EINVAL;
+ error = hugetlb_vmtruncate(inode, attr->ia_size);
if (error)
- goto out;
- attr->ia_valid &= ~ATTR_SIZE;
+ return error;
}
- error = inode_setattr(inode, attr);
-out:
- return error;
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
static struct inode *hugetlbfs_get_inode(struct super_block *sb, uid_t uid,
static const struct super_operations hugetlbfs_ops = {
.alloc_inode = hugetlbfs_alloc_inode,
.destroy_inode = hugetlbfs_destroy_inode,
+ .evict_inode = hugetlbfs_evict_inode,
.statfs = hugetlbfs_statfs,
- .delete_inode = hugetlbfs_delete_inode,
- .drop_inode = hugetlbfs_drop_inode,
.put_super = hugetlbfs_put_super,
.show_options = generic_show_options,
};
#include <linux/pagemap.h>
#include <linux/cdev.h>
#include <linux/bootmem.h>
-#include <linux/inotify.h>
#include <linux/fsnotify.h>
#include <linux/mount.h>
#include <linux/async.h>
INIT_RAW_PRIO_TREE_ROOT(&inode->i_data.i_mmap);
INIT_LIST_HEAD(&inode->i_data.i_mmap_nonlinear);
i_size_ordered_init(inode);
-#ifdef CONFIG_INOTIFY
- INIT_LIST_HEAD(&inode->inotify_watches);
- mutex_init(&inode->inotify_mutex);
-#endif
#ifdef CONFIG_FSNOTIFY
- INIT_HLIST_HEAD(&inode->i_fsnotify_mark_entries);
+ INIT_HLIST_HEAD(&inode->i_fsnotify_marks);
#endif
}
EXPORT_SYMBOL(inode_init_once);
inodes_stat.nr_unused--;
}
-/**
- * clear_inode - clear an inode
- * @inode: inode to clear
- *
- * This is called by the filesystem to tell us
- * that the inode is no longer useful. We just
- * terminate it with extreme prejudice.
- */
-void clear_inode(struct inode *inode)
+void end_writeback(struct inode *inode)
{
might_sleep();
- invalidate_inode_buffers(inode);
-
BUG_ON(inode->i_data.nrpages);
+ BUG_ON(!list_empty(&inode->i_data.private_list));
BUG_ON(!(inode->i_state & I_FREEING));
BUG_ON(inode->i_state & I_CLEAR);
inode_sync_wait(inode);
- if (inode->i_sb->s_op->clear_inode)
- inode->i_sb->s_op->clear_inode(inode);
+ inode->i_state = I_FREEING | I_CLEAR;
+}
+EXPORT_SYMBOL(end_writeback);
+
+static void evict(struct inode *inode)
+{
+ const struct super_operations *op = inode->i_sb->s_op;
+
+ if (op->evict_inode) {
+ op->evict_inode(inode);
+ } else {
+ if (inode->i_data.nrpages)
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
+ }
if (S_ISBLK(inode->i_mode) && inode->i_bdev)
bd_forget(inode);
if (S_ISCHR(inode->i_mode) && inode->i_cdev)
cd_forget(inode);
- inode->i_state = I_CLEAR;
}
-EXPORT_SYMBOL(clear_inode);
/*
* dispose_list - dispose of the contents of a local list
inode = list_first_entry(head, struct inode, i_list);
list_del(&inode->i_list);
- if (inode->i_data.nrpages)
- truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ evict(inode);
spin_lock(&inode_lock);
hlist_del_init(&inode->i_hash);
down_write(&iprune_sem);
spin_lock(&inode_lock);
- inotify_unmount_inodes(&sb->s_inodes);
fsnotify_unmount_inodes(&sb->s_inodes);
busy = invalidate_list(&sb->s_inodes, &throw_away);
spin_unlock(&inode_lock);
continue;
if (!test(inode, data))
continue;
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)) {
+ if (inode->i_state & (I_FREEING|I_WILL_FREE)) {
__wait_on_freeing_inode(inode);
goto repeat;
}
continue;
if (inode->i_sb != sb)
continue;
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)) {
+ if (inode->i_state & (I_FREEING|I_WILL_FREE)) {
__wait_on_freeing_inode(inode);
goto repeat;
}
struct inode *igrab(struct inode *inode)
{
spin_lock(&inode_lock);
- if (!(inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)))
+ if (!(inode->i_state & (I_FREEING|I_WILL_FREE)))
__iget(inode);
else
/*
continue;
if (old->i_sb != sb)
continue;
- if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE))
+ if (old->i_state & (I_FREEING|I_WILL_FREE))
continue;
break;
}
continue;
if (!test(old, data))
continue;
- if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE))
+ if (old->i_state & (I_FREEING|I_WILL_FREE))
continue;
break;
}
}
EXPORT_SYMBOL(remove_inode_hash);
+int generic_delete_inode(struct inode *inode)
+{
+ return 1;
+}
+EXPORT_SYMBOL(generic_delete_inode);
+
/*
- * Tell the filesystem that this inode is no longer of any interest and should
- * be completely destroyed.
- *
- * We leave the inode in the inode hash table until *after* the filesystem's
- * ->delete_inode completes. This ensures that an iget (such as nfsd might
- * instigate) will always find up-to-date information either in the hash or on
- * disk.
- *
- * I_FREEING is set so that no-one will take a new reference to the inode while
- * it is being deleted.
+ * Normal UNIX filesystem behaviour: delete the
+ * inode when the usage count drops to zero, and
+ * i_nlink is zero.
*/
-void generic_delete_inode(struct inode *inode)
+int generic_drop_inode(struct inode *inode)
{
- const struct super_operations *op = inode->i_sb->s_op;
-
- list_del_init(&inode->i_list);
- list_del_init(&inode->i_sb_list);
- WARN_ON(inode->i_state & I_NEW);
- inode->i_state |= I_FREEING;
- inodes_stat.nr_inodes--;
- spin_unlock(&inode_lock);
-
- if (op->delete_inode) {
- void (*delete)(struct inode *) = op->delete_inode;
- /* Filesystems implementing their own
- * s_op->delete_inode are required to call
- * truncate_inode_pages and clear_inode()
- * internally */
- delete(inode);
- } else {
- truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
- }
- spin_lock(&inode_lock);
- hlist_del_init(&inode->i_hash);
- spin_unlock(&inode_lock);
- wake_up_inode(inode);
- BUG_ON(inode->i_state != I_CLEAR);
- destroy_inode(inode);
+ return !inode->i_nlink || hlist_unhashed(&inode->i_hash);
}
-EXPORT_SYMBOL(generic_delete_inode);
+EXPORT_SYMBOL_GPL(generic_drop_inode);
-/**
- * generic_detach_inode - remove inode from inode lists
- * @inode: inode to remove
- *
- * Remove inode from inode lists, write it if it's dirty. This is just an
- * internal VFS helper exported for hugetlbfs. Do not use!
+/*
+ * Called when we're dropping the last reference
+ * to an inode.
*
- * Returns 1 if inode should be completely destroyed.
+ * Call the FS "drop_inode()" function, defaulting to
+ * the legacy UNIX filesystem behaviour. If it tells
+ * us to evict inode, do so. Otherwise, retain inode
+ * in cache if fs is alive, sync and evict if fs is
+ * shutting down.
*/
-int generic_detach_inode(struct inode *inode)
+static void iput_final(struct inode *inode)
{
struct super_block *sb = inode->i_sb;
+ const struct super_operations *op = inode->i_sb->s_op;
+ int drop;
- if (!hlist_unhashed(&inode->i_hash)) {
+ if (op && op->drop_inode)
+ drop = op->drop_inode(inode);
+ else
+ drop = generic_drop_inode(inode);
+
+ if (!drop) {
if (!(inode->i_state & (I_DIRTY|I_SYNC)))
list_move(&inode->i_list, &inode_unused);
inodes_stat.nr_unused++;
if (sb->s_flags & MS_ACTIVE) {
spin_unlock(&inode_lock);
- return 0;
+ return;
}
WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_WILL_FREE;
inode->i_state |= I_FREEING;
inodes_stat.nr_inodes--;
spin_unlock(&inode_lock);
- return 1;
-}
-EXPORT_SYMBOL_GPL(generic_detach_inode);
-
-static void generic_forget_inode(struct inode *inode)
-{
- if (!generic_detach_inode(inode))
- return;
- if (inode->i_data.nrpages)
- truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ evict(inode);
+ spin_lock(&inode_lock);
+ hlist_del_init(&inode->i_hash);
+ spin_unlock(&inode_lock);
wake_up_inode(inode);
+ BUG_ON(inode->i_state != (I_FREEING | I_CLEAR));
destroy_inode(inode);
}
-/*
- * Normal UNIX filesystem behaviour: delete the
- * inode when the usage count drops to zero, and
- * i_nlink is zero.
- */
-void generic_drop_inode(struct inode *inode)
-{
- if (!inode->i_nlink)
- generic_delete_inode(inode);
- else
- generic_forget_inode(inode);
-}
-EXPORT_SYMBOL_GPL(generic_drop_inode);
-
-/*
- * Called when we're dropping the last reference
- * to an inode.
- *
- * Call the FS "drop()" function, defaulting to
- * the legacy UNIX filesystem behaviour..
- *
- * NOTE! NOTE! NOTE! We're called with the inode lock
- * held, and the drop function is supposed to release
- * the lock!
- */
-static inline void iput_final(struct inode *inode)
-{
- const struct super_operations *op = inode->i_sb->s_op;
- void (*drop)(struct inode *) = generic_drop_inode;
-
- if (op && op->drop_inode)
- drop = op->drop_inode;
- drop(inode);
-}
-
/**
* iput - put an inode
* @inode: inode to put
void iput(struct inode *inode)
{
if (inode) {
- BUG_ON(inode->i_state == I_CLEAR);
+ BUG_ON(inode->i_state & I_CLEAR);
if (atomic_dec_and_lock(&inode->i_count, &inode_lock))
iput_final(inode);
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/lglock.h>
+
struct super_block;
struct linux_binprm;
struct path;
extern void __init mnt_init(void);
-extern spinlock_t vfsmount_lock;
+DECLARE_BRLOCK(vfsmount_lock);
+
/*
* fs_struct.c
/*
* file_table.c
*/
+extern void file_sb_list_add(struct file *f, struct super_block *sb);
+extern void file_sb_list_del(struct file *f);
extern void mark_files_ro(struct super_block *);
extern struct file *get_empty_filp(void);
* @arg: command-specific argument for ioctl
*
* Invokes filesystem specific ->unlocked_ioctl, if one exists; otherwise
- * invokes filesystem specific ->ioctl method. If neither method exists,
* returns -ENOTTY.
*
* Returns 0 on success, -errno on error.
{
int error = -ENOTTY;
- if (!filp->f_op)
+ if (!filp->f_op || !filp->f_op->unlocked_ioctl)
goto out;
- if (filp->f_op->unlocked_ioctl) {
- error = filp->f_op->unlocked_ioctl(filp, cmd, arg);
- if (error == -ENOIOCTLCMD)
- error = -EINVAL;
- goto out;
- } else if (filp->f_op->ioctl) {
- lock_kernel();
- error = filp->f_op->ioctl(filp->f_path.dentry->d_inode,
- filp, cmd, arg);
- unlock_kernel();
- }
-
+ error = filp->f_op->unlocked_ioctl(filp, cmd, arg);
+ if (error == -ENOIOCTLCMD)
+ error = -EINVAL;
out:
return error;
}
}
s->s_magic = ISOFS_SUPER_MAGIC;
- s->s_maxbytes = 0xffffffff; /* We can handle files up to 4 GB */
+
+ /*
+ * With multi-extent files, file size is only limited by the maximum
+ * size of a file system, which is 8 TB.
+ */
+ s->s_maxbytes = 0x80000000000LL;
/*
* The CDROM is read-only, has no nodes (devices) on it, and since
{
int i;
- ll_rw_block(SWRITE, *batch_count, bhs);
+ for (i = 0; i < *batch_count; i++)
+ write_dirty_buffer(bhs[i], WRITE);
+
for (i = 0; i < *batch_count; i++) {
struct buffer_head *bh = bhs[i];
clear_buffer_jwrite(bh);
struct buffer_head *bh;
journal_header_t *header;
int ret;
- int barrier_done = 0;
if (is_journal_aborted(journal))
return 0;
JBUFFER_TRACE(descriptor, "write commit block");
set_buffer_dirty(bh);
+
if (journal->j_flags & JFS_BARRIER) {
- set_buffer_ordered(bh);
- barrier_done = 1;
- }
- ret = sync_dirty_buffer(bh);
- if (barrier_done)
- clear_buffer_ordered(bh);
- /* is it possible for another commit to fail at roughly
- * the same time as this one? If so, we don't want to
- * trust the barrier flag in the super, but instead want
- * to remember if we sent a barrier request
- */
- if (ret == -EOPNOTSUPP && barrier_done) {
- char b[BDEVNAME_SIZE];
+ ret = __sync_dirty_buffer(bh, WRITE_SYNC | WRITE_BARRIER);
- printk(KERN_WARNING
- "JBD: barrier-based sync failed on %s - "
- "disabling barriers\n",
- bdevname(journal->j_dev, b));
- spin_lock(&journal->j_state_lock);
- journal->j_flags &= ~JFS_BARRIER;
- spin_unlock(&journal->j_state_lock);
+ /*
+ * Is it possible for another commit to fail at roughly
+ * the same time as this one? If so, we don't want to
+ * trust the barrier flag in the super, but instead want
+ * to remember if we sent a barrier request
+ */
+ if (ret == -EOPNOTSUPP) {
+ char b[BDEVNAME_SIZE];
- /* And try again, without the barrier */
- set_buffer_uptodate(bh);
- set_buffer_dirty(bh);
+ printk(KERN_WARNING
+ "JBD: barrier-based sync failed on %s - "
+ "disabling barriers\n",
+ bdevname(journal->j_dev, b));
+ spin_lock(&journal->j_state_lock);
+ journal->j_flags &= ~JFS_BARRIER;
+ spin_unlock(&journal->j_state_lock);
+
+ /* And try again, without the barrier */
+ set_buffer_uptodate(bh);
+ set_buffer_dirty(bh);
+ ret = sync_dirty_buffer(bh);
+ }
+ } else {
ret = sync_dirty_buffer(bh);
}
+
put_bh(bh); /* One for getblk() */
journal_put_journal_head(descriptor);
if (wait)
sync_dirty_buffer(bh);
else
- ll_rw_block(SWRITE, 1, &bh);
+ write_dirty_buffer(bh, WRITE);
out:
/* If we have just flushed the log (by marking s_start==0), then
set_buffer_jwrite(bh);
BUFFER_TRACE(bh, "write");
set_buffer_dirty(bh);
- ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
+ write_dirty_buffer(bh, write_op);
}
#endif
{
int i;
- ll_rw_block(SWRITE, *batch_count, journal->j_chkpt_bhs);
+ for (i = 0; i < *batch_count; i++)
+ write_dirty_buffer(journal->j_chkpt_bhs[i], WRITE);
+
for (i = 0; i < *batch_count; i++) {
struct buffer_head *bh = journal->j_chkpt_bhs[i];
clear_buffer_jwrite(bh);
struct commit_header *tmp;
struct buffer_head *bh;
int ret;
- int barrier_done = 0;
struct timespec now = current_kernel_time();
if (is_journal_aborted(journal))
if (journal->j_flags & JBD2_BARRIER &&
!JBD2_HAS_INCOMPAT_FEATURE(journal,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) {
- set_buffer_ordered(bh);
- barrier_done = 1;
- }
- ret = submit_bh(WRITE_SYNC_PLUG, bh);
- if (barrier_done)
- clear_buffer_ordered(bh);
-
- /* is it possible for another commit to fail at roughly
- * the same time as this one? If so, we don't want to
- * trust the barrier flag in the super, but instead want
- * to remember if we sent a barrier request
- */
- if (ret == -EOPNOTSUPP && barrier_done) {
- printk(KERN_WARNING
- "JBD2: Disabling barriers on %s, "
- "not supported by device\n", journal->j_devname);
- write_lock(&journal->j_state_lock);
- journal->j_flags &= ~JBD2_BARRIER;
- write_unlock(&journal->j_state_lock);
+ ret = submit_bh(WRITE_SYNC_PLUG | WRITE_BARRIER, bh);
+ if (ret == -EOPNOTSUPP) {
+ printk(KERN_WARNING
+ "JBD2: Disabling barriers on %s, "
+ "not supported by device\n", journal->j_devname);
+ write_lock(&journal->j_state_lock);
+ journal->j_flags &= ~JBD2_BARRIER;
+ write_unlock(&journal->j_state_lock);
- /* And try again, without the barrier */
- lock_buffer(bh);
- set_buffer_uptodate(bh);
- clear_buffer_dirty(bh);
+ /* And try again, without the barrier */
+ lock_buffer(bh);
+ set_buffer_uptodate(bh);
+ clear_buffer_dirty(bh);
+ ret = submit_bh(WRITE_SYNC_PLUG, bh);
+ }
+ } else {
ret = submit_bh(WRITE_SYNC_PLUG, bh);
}
*cbh = bh;
set_buffer_uptodate(bh);
}
} else
- ll_rw_block(SWRITE, 1, &bh);
+ write_dirty_buffer(bh, WRITE);
out:
/* If we have just flushed the log (by marking s_start==0), then
set_buffer_jwrite(bh);
BUFFER_TRACE(bh, "write");
set_buffer_dirty(bh);
- ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
+ write_dirty_buffer(bh, write_op);
}
#endif
* of that one update.
*/
+/*
+ * Update transiaction's maximum wait time, if debugging is enabled.
+ *
+ * In order for t_max_wait to be reliable, it must be protected by a
+ * lock. But doing so will mean that start_this_handle() can not be
+ * run in parallel on SMP systems, which limits our scalability. So
+ * unless debugging is enabled, we no longer update t_max_wait, which
+ * means that maximum wait time reported by the jbd2_run_stats
+ * tracepoint will always be zero.
+ */
+static inline void update_t_max_wait(transaction_t *transaction)
+{
+#ifdef CONFIG_JBD2_DEBUG
+ unsigned long ts = jiffies;
+
+ if (jbd2_journal_enable_debug &&
+ time_after(transaction->t_start, ts)) {
+ ts = jbd2_time_diff(ts, transaction->t_start);
+ spin_lock(&transaction->t_handle_lock);
+ if (ts > transaction->t_max_wait)
+ transaction->t_max_wait = ts;
+ spin_unlock(&transaction->t_handle_lock);
+ }
+#endif
+}
+
/*
* start_this_handle: Given a handle, deal with any locking or stalling
* needed to make sure that there is enough journal space for the handle
int needed;
int nblocks = handle->h_buffer_credits;
transaction_t *new_transaction = NULL;
- unsigned long ts = jiffies;
if (nblocks > journal->j_max_transaction_buffers) {
printk(KERN_ERR "JBD: %s wants too many credits (%d > %d)\n",
/* OK, account for the buffers that this operation expects to
* use and add the handle to the running transaction.
- *
- * In order for t_max_wait to be reliable, it must be
- * protected by a lock. But doing so will mean that
- * start_this_handle() can not be run in parallel on SMP
- * systems, which limits our scalability. So we only enable
- * it when debugging is enabled. We may want to use a
- * separate flag, eventually, so we can enable this
- * independently of debugging.
*/
-#ifdef CONFIG_JBD2_DEBUG
- if (jbd2_journal_enable_debug &&
- time_after(transaction->t_start, ts)) {
- ts = jbd2_time_diff(ts, transaction->t_start);
- spin_lock(&transaction->t_handle_lock);
- if (ts > transaction->t_max_wait)
- transaction->t_max_wait = ts;
- spin_unlock(&transaction->t_handle_lock);
- }
-#endif
+ update_t_max_wait(transaction);
handle->h_transaction = transaction;
atomic_inc(&transaction->t_updates);
atomic_inc(&transaction->t_handle_count);
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
- * Created by Arjan van de Ven <arjanv@redhat.com>
- *
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
* Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
* University of Szeged, Hungary
*
+ * Created by Arjan van de Ven <arjan@infradead.org>
+ *
* For licensing information, see the file 'LICENCE' in this directory.
*
*/
*
* Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
* University of Szeged, Hungary
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* For licensing information, see the file 'LICENCE' in this directory.
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2007 Nokia Corporation. All rights reserved.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by Richard Purdie <rpurdie@openedhand.com>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by Arjan van de Ven <arjanv@redhat.com>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by Arjan van de Ven <arjanv@redhat.com>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
return 0;
fail:
- make_bad_inode(inode);
- unlock_new_inode(inode);
- iput(inode);
+ iget_failed(inode);
jffs2_free_raw_inode(ri);
return ret;
}
return 0;
fail:
- make_bad_inode(inode);
- unlock_new_inode(inode);
- iput(inode);
+ iget_failed(inode);
return ret;
}
return 0;
fail:
- make_bad_inode(inode);
- unlock_new_inode(inode);
- iput(inode);
+ iget_failed(inode);
return ret;
}
return 0;
fail:
- make_bad_inode(inode);
- unlock_new_inode(inode);
- iput(inode);
+ iget_failed(inode);
return ret;
}
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- /* We have to do the simple_setsize() without f->sem held, since
+ /* We have to do the truncate_setsize() without f->sem held, since
some pages may be locked and waiting for it in readpage().
We are protected from a simultaneous write() extending i_size
back past iattr->ia_size, because do_truncate() holds the
generic inode semaphore. */
if (ivalid & ATTR_SIZE && inode->i_size > iattr->ia_size) {
- simple_setsize(inode, iattr->ia_size);
+ truncate_setsize(inode, iattr->ia_size);
inode->i_blocks = (inode->i_size + 511) >> 9;
}
}
-void jffs2_clear_inode (struct inode *inode)
+void jffs2_evict_inode (struct inode *inode)
{
/* We can forget about this inode for now - drop all
* the nodelists associated with it, etc.
struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
- D1(printk(KERN_DEBUG "jffs2_clear_inode(): ino #%lu mode %o\n", inode->i_ino, inode->i_mode));
+ D1(printk(KERN_DEBUG "jffs2_evict_inode(): ino #%lu mode %o\n", inode->i_ino, inode->i_mode));
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
jffs2_do_clear_inode(c, f);
}
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
#ifdef __ECOS
#include "os-ecos.h"
#else
-#include <linux/mtd/compatmac.h> /* For compatibility with older kernels */
#include "os-linux.h"
#endif
int jffs2_setattr (struct dentry *, struct iattr *);
int jffs2_do_setattr (struct inode *, struct iattr *);
struct inode *jffs2_iget(struct super_block *, unsigned long);
-void jffs2_clear_inode (struct inode *);
+void jffs2_evict_inode (struct inode *);
void jffs2_dirty_inode(struct inode *inode);
struct inode *jffs2_new_inode (struct inode *dir_i, int mode,
struct jffs2_raw_inode *ri);
.write_super = jffs2_write_super,
.statfs = jffs2_statfs,
.remount_fs = jffs2_remount_fs,
- .clear_inode = jffs2_clear_inode,
+ .evict_inode = jffs2_evict_inode,
.dirty_inode = jffs2_dirty_inode,
.sync_fs = jffs2_sync_fs,
};
void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic)
{
- /* It's called from jffs2_clear_inode() on inode removing.
+ /* It's called from jffs2_evict_inode() on inode removing.
When an inode with XATTR is removed, those XATTRs must be removed. */
struct jffs2_xattr_ref *ref, *_ref;
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/quotaops.h>
#include "jfs_incore.h"
return rc;
}
- rc = inode_setattr(inode, iattr);
+ if ((iattr->ia_valid & ATTR_SIZE) &&
+ iattr->ia_size != i_size_read(inode)) {
+ rc = vmtruncate(inode, iattr->ia_size);
+ if (rc)
+ return rc;
+ }
- if (!rc && (iattr->ia_valid & ATTR_MODE))
- rc = jfs_acl_chmod(inode);
+ setattr_copy(inode, iattr);
+ mark_inode_dirty(inode);
+ if (iattr->ia_valid & ATTR_MODE)
+ rc = jfs_acl_chmod(inode);
return rc;
}
return 0;
}
-void jfs_delete_inode(struct inode *inode)
+void jfs_evict_inode(struct inode *inode)
{
- jfs_info("In jfs_delete_inode, inode = 0x%p", inode);
+ jfs_info("In jfs_evict_inode, inode = 0x%p", inode);
- if (!is_bad_inode(inode))
+ if (!inode->i_nlink && !is_bad_inode(inode)) {
dquot_initialize(inode);
- if (!is_bad_inode(inode) &&
- (JFS_IP(inode)->fileset == FILESYSTEM_I)) {
- truncate_inode_pages(&inode->i_data, 0);
+ if (JFS_IP(inode)->fileset == FILESYSTEM_I) {
+ truncate_inode_pages(&inode->i_data, 0);
- if (test_cflag(COMMIT_Freewmap, inode))
- jfs_free_zero_link(inode);
+ if (test_cflag(COMMIT_Freewmap, inode))
+ jfs_free_zero_link(inode);
- diFree(inode);
+ diFree(inode);
- /*
- * Free the inode from the quota allocation.
- */
- dquot_initialize(inode);
- dquot_free_inode(inode);
- dquot_drop(inode);
+ /*
+ * Free the inode from the quota allocation.
+ */
+ dquot_initialize(inode);
+ dquot_free_inode(inode);
+ }
+ } else {
+ truncate_inode_pages(&inode->i_data, 0);
}
-
- clear_inode(inode);
+ end_writeback(inode);
+ dquot_drop(inode);
}
void jfs_dirty_inode(struct inode *inode)
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- return nobh_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ int ret;
+
+ ret = nobh_write_begin(mapping, pos, len, flags, pagep, fsdata,
jfs_get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t jfs_bmap(struct address_space *mapping, sector_t block)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
+ ssize_t ret;
- return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs, jfs_get_block, NULL);
+
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+
+ return ret;
}
const struct address_space_operations jfs_aops = {
extern struct inode *jfs_iget(struct super_block *, unsigned long);
extern int jfs_commit_inode(struct inode *, int);
extern int jfs_write_inode(struct inode *, struct writeback_control *);
-extern void jfs_delete_inode(struct inode *);
+extern void jfs_evict_inode(struct inode *);
extern void jfs_dirty_inode(struct inode *);
extern void jfs_truncate(struct inode *);
extern void jfs_truncate_nolock(struct inode *, loff_t);
kmem_cache_free(jfs_inode_cachep, ji);
}
-static void jfs_clear_inode(struct inode *inode)
-{
- dquot_drop(inode);
-}
-
static int jfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct jfs_sb_info *sbi = JFS_SBI(dentry->d_sb);
.destroy_inode = jfs_destroy_inode,
.dirty_inode = jfs_dirty_inode,
.write_inode = jfs_write_inode,
- .delete_inode = jfs_delete_inode,
- .clear_inode = jfs_clear_inode,
+ .evict_inode = jfs_evict_inode,
.put_super = jfs_put_super,
.sync_fs = jfs_sync_fs,
.freeze_fs = jfs_freeze,
#define EA_MALLOC 0x0008
+static int is_known_namespace(const char *name)
+{
+ if (strncmp(name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN) &&
+ strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN) &&
+ strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN) &&
+ strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN))
+ return false;
+
+ return true;
+}
+
/*
* These three routines are used to recognize on-disk extended attributes
* that are in a recognized namespace. If the attribute is not recognized,
* "os2." is prepended to the name
*/
-static inline int is_os2_xattr(struct jfs_ea *ea)
+static int is_os2_xattr(struct jfs_ea *ea)
{
- /*
- * Check for "system."
- */
- if ((ea->namelen >= XATTR_SYSTEM_PREFIX_LEN) &&
- !strncmp(ea->name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN))
- return false;
- /*
- * Check for "user."
- */
- if ((ea->namelen >= XATTR_USER_PREFIX_LEN) &&
- !strncmp(ea->name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN))
- return false;
- /*
- * Check for "security."
- */
- if ((ea->namelen >= XATTR_SECURITY_PREFIX_LEN) &&
- !strncmp(ea->name, XATTR_SECURITY_PREFIX,
- XATTR_SECURITY_PREFIX_LEN))
- return false;
- /*
- * Check for "trusted."
- */
- if ((ea->namelen >= XATTR_TRUSTED_PREFIX_LEN) &&
- !strncmp(ea->name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN))
- return false;
- /*
- * Add any other valid namespace prefixes here
- */
-
- /*
- * We assume it's OS/2's flat namespace
- */
- return true;
+ return !is_known_namespace(ea->name);
}
static inline int name_size(struct jfs_ea *ea)
if (!strncmp(name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN))
return can_set_system_xattr(inode, name, value, value_len);
+ if (!strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN)) {
+ /*
+ * This makes sure that we aren't trying to set an
+ * attribute in a different namespace by prefixing it
+ * with "os2."
+ */
+ if (is_known_namespace(name + XATTR_OS2_PREFIX_LEN))
+ return -EOPNOTSUPP;
+ return 0;
+ }
+
/*
* Don't allow setting an attribute in an unknown namespace.
*/
if (strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) &&
strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN) &&
- strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN) &&
- strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN))
+ strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN))
return -EOPNOTSUPP;
return 0;
int xattr_size;
ssize_t size;
int namelen = strlen(name);
- char *os2name = NULL;
char *value;
- if (strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN) == 0) {
- os2name = kmalloc(namelen - XATTR_OS2_PREFIX_LEN + 1,
- GFP_KERNEL);
- if (!os2name)
- return -ENOMEM;
- strcpy(os2name, name + XATTR_OS2_PREFIX_LEN);
- name = os2name;
- namelen -= XATTR_OS2_PREFIX_LEN;
- }
-
down_read(&JFS_IP(inode)->xattr_sem);
xattr_size = ea_get(inode, &ea_buf, 0);
out:
up_read(&JFS_IP(inode)->xattr_sem);
- kfree(os2name);
-
return size;
}
{
int err;
+ if (strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN) == 0) {
+ /*
+ * skip past "os2." prefix
+ */
+ name += XATTR_OS2_PREFIX_LEN;
+ /*
+ * Don't allow retrieving properly prefixed attributes
+ * by prepending them with "os2."
+ */
+ if (is_known_namespace(name))
+ return -EOPNOTSUPP;
+ }
+
err = __jfs_getxattr(dentry->d_inode, name, data, buf_size);
return err;
}
/**
- * simple_setsize - handle core mm and vfs requirements for file size change
- * @inode: inode
- * @newsize: new file size
- *
- * Returns 0 on success, -error on failure.
- *
- * simple_setsize must be called with inode_mutex held.
- *
- * simple_setsize will check that the requested new size is OK (see
- * inode_newsize_ok), and then will perform the necessary i_size update
- * and pagecache truncation (if necessary). It will be typically be called
- * from the filesystem's setattr function when ATTR_SIZE is passed in.
- *
- * The inode itself must have correct permissions and attributes to allow
- * i_size to be changed, this function then just checks that the new size
- * requested is valid.
- *
- * In the case of simple in-memory filesystems with inodes stored solely
- * in the inode cache, and file data in the pagecache, nothing more needs
- * to be done to satisfy a truncate request. Filesystems with on-disk
- * blocks for example will need to free them in the case of truncate, in
- * that case it may be easier not to use simple_setsize (but each of its
- * components will likely be required at some point to update pagecache
- * and inode etc).
- */
-int simple_setsize(struct inode *inode, loff_t newsize)
-{
- loff_t oldsize;
- int error;
-
- error = inode_newsize_ok(inode, newsize);
- if (error)
- return error;
-
- oldsize = inode->i_size;
- i_size_write(inode, newsize);
- truncate_pagecache(inode, oldsize, newsize);
-
- return error;
-}
-EXPORT_SYMBOL(simple_setsize);
-
-/**
- * simple_setattr - setattr for simple in-memory filesystem
+ * simple_setattr - setattr for simple filesystem
* @dentry: dentry
* @iattr: iattr structure
*
* Returns 0 on success, -error on failure.
*
- * simple_setattr implements setattr for an in-memory filesystem which
- * does not store its own file data or metadata (eg. uses the page cache
- * and inode cache as its data store).
+ * simple_setattr is a simple ->setattr implementation without a proper
+ * implementation of size changes.
+ *
+ * It can either be used for in-memory filesystems or special files
+ * on simple regular filesystems. Anything that needs to change on-disk
+ * or wire state on size changes needs its own setattr method.
*/
int simple_setattr(struct dentry *dentry, struct iattr *iattr)
{
struct inode *inode = dentry->d_inode;
int error;
+ WARN_ON_ONCE(inode->i_op->truncate);
+
error = inode_change_ok(inode, iattr);
if (error)
return error;
- if (iattr->ia_valid & ATTR_SIZE) {
- error = simple_setsize(inode, iattr->ia_size);
- if (error)
- return error;
- }
-
- generic_setattr(inode, iattr);
-
- return error;
+ if (iattr->ia_valid & ATTR_SIZE)
+ truncate_setsize(inode, iattr->ia_size);
+ setattr_copy(inode, iattr);
+ mark_inode_dirty(inode);
+ return 0;
}
EXPORT_SYMBOL(simple_setattr);
int ret;
ta = kzalloc(sizeof(*ta), GFP_KERNEL);
- if (!ta)
+ if (!ta) {
+ inode->i_nlink--;
+ iput(inode);
return -ENOMEM;
+ }
ta->state = CREATE_1;
ta->ino = inode->i_ino;
};
const struct file_operations logfs_dir_fops = {
.fsync = logfs_fsync,
- .ioctl = logfs_ioctl,
+ .unlocked_ioctl = logfs_ioctl,
.readdir = logfs_readdir,
.read = generic_read_dir,
};
}
-int logfs_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
+long logfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
+ struct inode *inode = file->f_path.dentry->d_inode;
struct logfs_inode *li = logfs_inode(inode);
unsigned int oldflags, flags;
int err;
struct inode *inode = dentry->d_inode;
int err = 0;
- if (attr->ia_valid & ATTR_SIZE)
+ err = inode_change_ok(inode, attr);
+ if (err)
+ return err;
+
+ if (attr->ia_valid & ATTR_SIZE) {
err = logfs_truncate(inode, attr->ia_size);
- attr->ia_valid &= ~ATTR_SIZE;
+ if (err)
+ return err;
+ }
- if (!err)
- err = inode_change_ok(inode, attr);
- if (!err)
- err = inode_setattr(inode, attr);
- return err;
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
const struct inode_operations logfs_reg_iops = {
.aio_read = generic_file_aio_read,
.aio_write = generic_file_aio_write,
.fsync = logfs_fsync,
- .ioctl = logfs_ioctl,
+ .unlocked_ioctl = logfs_ioctl,
.llseek = generic_file_llseek,
.mmap = generic_file_readonly_mmap,
.open = generic_file_open,
* purpose is to create a new inode that will not trigger the warning if such
* an inode is still in use. An ugly hack, no doubt. Suggections for
* improvement are welcome.
+ *
+ * AV: that's what ->put_super() is for...
*/
struct inode *logfs_new_meta_inode(struct super_block *sb, u64 ino)
{
struct inode *inode;
- inode = logfs_alloc_inode(sb);
+ inode = new_inode(sb);
if (!inode)
return ERR_PTR(-ENOMEM);
inode->i_mode = S_IFREG;
inode->i_ino = ino;
- inode->i_sb = sb;
-
- /* This is a blatant copy of alloc_inode code. We'd need alloc_inode
- * to be nonstatic, alas. */
- {
- struct address_space * const mapping = &inode->i_data;
-
- mapping->a_ops = &logfs_reg_aops;
- mapping->host = inode;
- mapping->flags = 0;
- mapping_set_gfp_mask(mapping, GFP_NOFS);
- mapping->assoc_mapping = NULL;
- mapping->backing_dev_info = &default_backing_dev_info;
- inode->i_mapping = mapping;
- inode->i_nlink = 1;
- }
+ inode->i_data.a_ops = &logfs_reg_aops;
+ mapping_set_gfp_mask(&inode->i_data, GFP_NOFS);
return inode;
}
err = logfs_read_inode(inode);
if (err) {
- destroy_meta_inode(inode);
+ iput(inode);
return ERR_PTR(err);
}
logfs_inode_setops(inode);
return ret;
}
-void destroy_meta_inode(struct inode *inode)
-{
- if (inode) {
- if (inode->i_data.nrpages)
- truncate_inode_pages(&inode->i_data, 0);
- logfs_clear_inode(inode);
- kmem_cache_free(logfs_inode_cache, logfs_inode(inode));
- }
-}
-
/* called with inode_lock held */
-static void logfs_drop_inode(struct inode *inode)
+static int logfs_drop_inode(struct inode *inode)
{
struct logfs_super *super = logfs_super(inode->i_sb);
struct logfs_inode *li = logfs_inode(inode);
spin_lock(&logfs_inode_lock);
list_move(&li->li_freeing_list, &super->s_freeing_list);
spin_unlock(&logfs_inode_lock);
- generic_drop_inode(inode);
+ return generic_drop_inode(inode);
}
static void logfs_set_ino_generation(struct super_block *sb,
return 0;
}
+static void logfs_put_super(struct super_block *sb)
+{
+ struct logfs_super *super = logfs_super(sb);
+ /* kill the meta-inodes */
+ iput(super->s_master_inode);
+ iput(super->s_segfile_inode);
+ iput(super->s_mapping_inode);
+}
+
const struct super_operations logfs_super_operations = {
.alloc_inode = logfs_alloc_inode,
- .clear_inode = logfs_clear_inode,
- .delete_inode = logfs_delete_inode,
.destroy_inode = logfs_destroy_inode,
+ .evict_inode = logfs_evict_inode,
.drop_inode = logfs_drop_inode,
+ .put_super = logfs_put_super,
.write_inode = logfs_write_inode,
.statfs = logfs_statfs,
.sync_fs = logfs_sync_fs,
struct logfs_super *super = logfs_super(sb);
btree_grim_visitor32(&super->s_reserved_segments, 0, NULL);
- destroy_meta_inode(super->s_master_inode);
- super->s_master_inode = NULL;
kfree(super->s_compressed_je);
kfree(super->s_je);
extern const struct file_operations logfs_reg_fops;
extern const struct address_space_operations logfs_reg_aops;
int logfs_readpage(struct file *file, struct page *page);
-int logfs_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg);
+long logfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
int logfs_fsync(struct file *file, int datasync);
/* gc.c */
struct inode *logfs_read_meta_inode(struct super_block *sb, u64 ino);
int logfs_init_inode_cache(void);
void logfs_destroy_inode_cache(void);
-void destroy_meta_inode(struct inode *inode);
void logfs_set_blocks(struct inode *inode, u64 no);
/* these logically belong into inode.c but actually reside in readwrite.c */
int logfs_read_inode(struct inode *inode);
int __logfs_write_inode(struct inode *inode, long flags);
-void logfs_delete_inode(struct inode *inode);
-void logfs_clear_inode(struct inode *inode);
+void logfs_evict_inode(struct inode *inode);
/* journal.c */
void logfs_write_anchor(struct super_block *sb);
return page;
}
-/* Cheaper version of write_inode. All changes are concealed in
- * aliases, which are moved back. No write to the medium happens.
- */
-void logfs_clear_inode(struct inode *inode)
-{
- struct super_block *sb = inode->i_sb;
- struct logfs_inode *li = logfs_inode(inode);
- struct logfs_block *block = li->li_block;
- struct page *page;
-
- /* Only deleted files may be dirty at this point */
- BUG_ON(inode->i_state & I_DIRTY && inode->i_nlink);
- if (!block)
- return;
- if ((logfs_super(sb)->s_flags & LOGFS_SB_FLAG_SHUTDOWN)) {
- block->ops->free_block(inode->i_sb, block);
- return;
- }
-
- BUG_ON(inode->i_ino < LOGFS_RESERVED_INOS);
- page = inode_to_page(inode);
- BUG_ON(!page); /* FIXME: Use emergency page */
- logfs_put_write_page(page);
-}
-
static int do_write_inode(struct inode *inode)
{
struct super_block *sb = inode->i_sb;
* ZOMBIE inodes have already been deleted before and should remain dead,
* if it weren't for valid checking. No need to kill them again here.
*/
-void logfs_delete_inode(struct inode *inode)
+void logfs_evict_inode(struct inode *inode)
{
+ struct super_block *sb = inode->i_sb;
struct logfs_inode *li = logfs_inode(inode);
+ struct logfs_block *block = li->li_block;
+ struct page *page;
- if (!(li->li_flags & LOGFS_IF_ZOMBIE)) {
- li->li_flags |= LOGFS_IF_ZOMBIE;
- if (i_size_read(inode) > 0)
- logfs_truncate(inode, 0);
- do_delete_inode(inode);
+ if (!inode->i_nlink) {
+ if (!(li->li_flags & LOGFS_IF_ZOMBIE)) {
+ li->li_flags |= LOGFS_IF_ZOMBIE;
+ if (i_size_read(inode) > 0)
+ logfs_truncate(inode, 0);
+ do_delete_inode(inode);
+ }
}
truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ end_writeback(inode);
+
+ /* Cheaper version of write_inode. All changes are concealed in
+ * aliases, which are moved back. No write to the medium happens.
+ */
+ /* Only deleted files may be dirty at this point */
+ BUG_ON(inode->i_state & I_DIRTY && inode->i_nlink);
+ if (!block)
+ return;
+ if ((logfs_super(sb)->s_flags & LOGFS_SB_FLAG_SHUTDOWN)) {
+ block->ops->free_block(inode->i_sb, block);
+ return;
+ }
+
+ BUG_ON(inode->i_ino < LOGFS_RESERVED_INOS);
+ page = inode_to_page(inode);
+ BUG_ON(!page); /* FIXME: Use emergency page */
+ logfs_put_write_page(page);
}
void btree_write_block(struct logfs_block *block)
{
struct logfs_super *super = logfs_super(sb);
- destroy_meta_inode(super->s_segfile_inode);
logfs_mempool_destroy(super->s_block_pool);
logfs_mempool_destroy(super->s_shadow_pool);
}
for_each_area(i)
free_area(super->s_area[i]);
free_area(super->s_journal_area);
- destroy_meta_inode(super->s_mapping_inode);
}
goto fail;
}
+ /* at that point we know that ->put_super() will be called */
super->s_erase_page = alloc_pages(GFP_KERNEL, 0);
if (!super->s_erase_page)
- goto fail;
+ return -ENOMEM;
memset(page_address(super->s_erase_page), 0xFF, PAGE_SIZE);
/* FIXME: check for read-only mounts */
err = logfs_make_writeable(sb);
- if (err)
- goto fail1;
+ if (err) {
+ __free_page(super->s_erase_page);
+ return err;
+ }
log_super("LogFS: Finished mounting\n");
simple_set_mnt(mnt, sb);
return 0;
-fail1:
- __free_page(super->s_erase_page);
fail:
- iput(logfs_super(sb)->s_master_inode);
+ iput(super->s_master_inode);
+ iput(super->s_segfile_inode);
+ iput(super->s_mapping_inode);
return -EIO;
}
sb->s_flags |= MS_ACTIVE;
err = logfs_get_sb_final(sb, mnt);
if (err)
- goto err1;
- return 0;
+ deactivate_locked_super(sb);
+ return err;
err1:
+ /* no ->s_root, no ->put_super() */
+ iput(super->s_master_inode);
+ iput(super->s_segfile_inode);
+ iput(super->s_mapping_inode);
deactivate_locked_super(sb);
return err;
err0:
struct mb_cache {
struct list_head c_cache_list;
const char *c_name;
- struct mb_cache_op c_op;
atomic_t c_entry_count;
+ int c_max_entries;
int c_bucket_bits;
-#ifndef MB_CACHE_INDEXES_COUNT
- int c_indexes_count;
-#endif
- struct kmem_cache *c_entry_cache;
+ struct kmem_cache *c_entry_cache;
struct list_head *c_block_hash;
- struct list_head *c_indexes_hash[0];
+ struct list_head *c_index_hash;
};
static LIST_HEAD(mb_cache_lru_list);
static DEFINE_SPINLOCK(mb_cache_spinlock);
-static inline int
-mb_cache_indexes(struct mb_cache *cache)
-{
-#ifdef MB_CACHE_INDEXES_COUNT
- return MB_CACHE_INDEXES_COUNT;
-#else
- return cache->c_indexes_count;
-#endif
-}
-
/*
* What the mbcache registers as to get shrunk dynamically.
*/
static void
__mb_cache_entry_unhash(struct mb_cache_entry *ce)
{
- int n;
-
if (__mb_cache_entry_is_hashed(ce)) {
list_del_init(&ce->e_block_list);
- for (n=0; n<mb_cache_indexes(ce->e_cache); n++)
- list_del(&ce->e_indexes[n].o_list);
+ list_del(&ce->e_index.o_list);
}
}
struct mb_cache *cache = ce->e_cache;
mb_assert(!(ce->e_used || ce->e_queued));
- if (cache->c_op.free && cache->c_op.free(ce, gfp_mask)) {
- /* free failed -- put back on the lru list
- for freeing later. */
- spin_lock(&mb_cache_spinlock);
- list_add(&ce->e_lru_list, &mb_cache_lru_list);
- spin_unlock(&mb_cache_spinlock);
- } else {
- kmem_cache_free(cache->c_entry_cache, ce);
- atomic_dec(&cache->c_entry_count);
- }
+ kmem_cache_free(cache->c_entry_cache, ce);
+ atomic_dec(&cache->c_entry_count);
}
mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(free_list);
- struct list_head *l, *ltmp;
+ struct mb_cache *cache;
+ struct mb_cache_entry *entry, *tmp;
int count = 0;
- spin_lock(&mb_cache_spinlock);
- list_for_each(l, &mb_cache_list) {
- struct mb_cache *cache =
- list_entry(l, struct mb_cache, c_cache_list);
- mb_debug("cache %s (%d)", cache->c_name,
- atomic_read(&cache->c_entry_count));
- count += atomic_read(&cache->c_entry_count);
- }
mb_debug("trying to free %d entries", nr_to_scan);
- if (nr_to_scan == 0) {
- spin_unlock(&mb_cache_spinlock);
- goto out;
- }
+ spin_lock(&mb_cache_spinlock);
while (nr_to_scan-- && !list_empty(&mb_cache_lru_list)) {
struct mb_cache_entry *ce =
list_entry(mb_cache_lru_list.next,
list_move_tail(&ce->e_lru_list, &free_list);
__mb_cache_entry_unhash(ce);
}
+ list_for_each_entry(cache, &mb_cache_list, c_cache_list) {
+ mb_debug("cache %s (%d)", cache->c_name,
+ atomic_read(&cache->c_entry_count));
+ count += atomic_read(&cache->c_entry_count);
+ }
spin_unlock(&mb_cache_spinlock);
- list_for_each_safe(l, ltmp, &free_list) {
- __mb_cache_entry_forget(list_entry(l, struct mb_cache_entry,
- e_lru_list), gfp_mask);
+ list_for_each_entry_safe(entry, tmp, &free_list, e_lru_list) {
+ __mb_cache_entry_forget(entry, gfp_mask);
}
-out:
return (count / 100) * sysctl_vfs_cache_pressure;
}
* memory was available.
*
* @name: name of the cache (informal)
- * @cache_op: contains the callback called when freeing a cache entry
- * @entry_size: The size of a cache entry, including
- * struct mb_cache_entry
- * @indexes_count: number of additional indexes in the cache. Must equal
- * MB_CACHE_INDEXES_COUNT if the number of indexes is
- * hardwired.
* @bucket_bits: log2(number of hash buckets)
*/
struct mb_cache *
-mb_cache_create(const char *name, struct mb_cache_op *cache_op,
- size_t entry_size, int indexes_count, int bucket_bits)
+mb_cache_create(const char *name, int bucket_bits)
{
- int m=0, n, bucket_count = 1 << bucket_bits;
+ int n, bucket_count = 1 << bucket_bits;
struct mb_cache *cache = NULL;
- if(entry_size < sizeof(struct mb_cache_entry) +
- indexes_count * sizeof(((struct mb_cache_entry *) 0)->e_indexes[0]))
- return NULL;
-
- cache = kmalloc(sizeof(struct mb_cache) +
- indexes_count * sizeof(struct list_head), GFP_KERNEL);
+ cache = kmalloc(sizeof(struct mb_cache), GFP_KERNEL);
if (!cache)
- goto fail;
+ return NULL;
cache->c_name = name;
- cache->c_op.free = NULL;
- if (cache_op)
- cache->c_op.free = cache_op->free;
atomic_set(&cache->c_entry_count, 0);
cache->c_bucket_bits = bucket_bits;
-#ifdef MB_CACHE_INDEXES_COUNT
- mb_assert(indexes_count == MB_CACHE_INDEXES_COUNT);
-#else
- cache->c_indexes_count = indexes_count;
-#endif
cache->c_block_hash = kmalloc(bucket_count * sizeof(struct list_head),
GFP_KERNEL);
if (!cache->c_block_hash)
goto fail;
for (n=0; n<bucket_count; n++)
INIT_LIST_HEAD(&cache->c_block_hash[n]);
- for (m=0; m<indexes_count; m++) {
- cache->c_indexes_hash[m] = kmalloc(bucket_count *
- sizeof(struct list_head),
- GFP_KERNEL);
- if (!cache->c_indexes_hash[m])
- goto fail;
- for (n=0; n<bucket_count; n++)
- INIT_LIST_HEAD(&cache->c_indexes_hash[m][n]);
- }
- cache->c_entry_cache = kmem_cache_create(name, entry_size, 0,
+ cache->c_index_hash = kmalloc(bucket_count * sizeof(struct list_head),
+ GFP_KERNEL);
+ if (!cache->c_index_hash)
+ goto fail;
+ for (n=0; n<bucket_count; n++)
+ INIT_LIST_HEAD(&cache->c_index_hash[n]);
+ cache->c_entry_cache = kmem_cache_create(name,
+ sizeof(struct mb_cache_entry), 0,
SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD, NULL);
if (!cache->c_entry_cache)
- goto fail;
+ goto fail2;
+
+ /*
+ * Set an upper limit on the number of cache entries so that the hash
+ * chains won't grow too long.
+ */
+ cache->c_max_entries = bucket_count << 4;
spin_lock(&mb_cache_spinlock);
list_add(&cache->c_cache_list, &mb_cache_list);
spin_unlock(&mb_cache_spinlock);
return cache;
+fail2:
+ kfree(cache->c_index_hash);
+
fail:
- if (cache) {
- while (--m >= 0)
- kfree(cache->c_indexes_hash[m]);
- kfree(cache->c_block_hash);
- kfree(cache);
- }
+ kfree(cache->c_block_hash);
+ kfree(cache);
return NULL;
}
{
LIST_HEAD(free_list);
struct list_head *l, *ltmp;
- int n;
spin_lock(&mb_cache_spinlock);
list_for_each_safe(l, ltmp, &mb_cache_lru_list) {
kmem_cache_destroy(cache->c_entry_cache);
- for (n=0; n < mb_cache_indexes(cache); n++)
- kfree(cache->c_indexes_hash[n]);
+ kfree(cache->c_index_hash);
kfree(cache->c_block_hash);
kfree(cache);
}
-
/*
* mb_cache_entry_alloc()
*
struct mb_cache_entry *
mb_cache_entry_alloc(struct mb_cache *cache, gfp_t gfp_flags)
{
- struct mb_cache_entry *ce;
+ struct mb_cache_entry *ce = NULL;
- ce = kmem_cache_alloc(cache->c_entry_cache, gfp_flags);
- if (ce) {
+ if (atomic_read(&cache->c_entry_count) >= cache->c_max_entries) {
+ spin_lock(&mb_cache_spinlock);
+ if (!list_empty(&mb_cache_lru_list)) {
+ ce = list_entry(mb_cache_lru_list.next,
+ struct mb_cache_entry, e_lru_list);
+ list_del_init(&ce->e_lru_list);
+ __mb_cache_entry_unhash(ce);
+ }
+ spin_unlock(&mb_cache_spinlock);
+ }
+ if (!ce) {
+ ce = kmem_cache_alloc(cache->c_entry_cache, gfp_flags);
+ if (!ce)
+ return NULL;
atomic_inc(&cache->c_entry_count);
INIT_LIST_HEAD(&ce->e_lru_list);
INIT_LIST_HEAD(&ce->e_block_list);
ce->e_cache = cache;
- ce->e_used = 1 + MB_CACHE_WRITER;
ce->e_queued = 0;
}
+ ce->e_used = 1 + MB_CACHE_WRITER;
return ce;
}
*
* @bdev: device the cache entry belongs to
* @block: block number
- * @keys: array of additional keys. There must be indexes_count entries
- * in the array (as specified when creating the cache).
+ * @key: lookup key
*/
int
mb_cache_entry_insert(struct mb_cache_entry *ce, struct block_device *bdev,
- sector_t block, unsigned int keys[])
+ sector_t block, unsigned int key)
{
struct mb_cache *cache = ce->e_cache;
unsigned int bucket;
struct list_head *l;
- int error = -EBUSY, n;
+ int error = -EBUSY;
bucket = hash_long((unsigned long)bdev + (block & 0xffffffff),
cache->c_bucket_bits);
ce->e_bdev = bdev;
ce->e_block = block;
list_add(&ce->e_block_list, &cache->c_block_hash[bucket]);
- for (n=0; n<mb_cache_indexes(cache); n++) {
- ce->e_indexes[n].o_key = keys[n];
- bucket = hash_long(keys[n], cache->c_bucket_bits);
- list_add(&ce->e_indexes[n].o_list,
- &cache->c_indexes_hash[n][bucket]);
- }
+ ce->e_index.o_key = key;
+ bucket = hash_long(key, cache->c_bucket_bits);
+ list_add(&ce->e_index.o_list, &cache->c_index_hash[bucket]);
error = 0;
out:
spin_unlock(&mb_cache_spinlock);
static struct mb_cache_entry *
__mb_cache_entry_find(struct list_head *l, struct list_head *head,
- int index, struct block_device *bdev, unsigned int key)
+ struct block_device *bdev, unsigned int key)
{
while (l != head) {
struct mb_cache_entry *ce =
- list_entry(l, struct mb_cache_entry,
- e_indexes[index].o_list);
- if (ce->e_bdev == bdev && ce->e_indexes[index].o_key == key) {
+ list_entry(l, struct mb_cache_entry, e_index.o_list);
+ if (ce->e_bdev == bdev && ce->e_index.o_key == key) {
DEFINE_WAIT(wait);
if (!list_empty(&ce->e_lru_list))
* returned cache entry is locked for shared access ("multiple readers").
*
* @cache: the cache to search
- * @index: the number of the additonal index to search (0<=index<indexes_count)
* @bdev: the device the cache entry should belong to
* @key: the key in the index
*/
struct mb_cache_entry *
-mb_cache_entry_find_first(struct mb_cache *cache, int index,
- struct block_device *bdev, unsigned int key)
+mb_cache_entry_find_first(struct mb_cache *cache, struct block_device *bdev,
+ unsigned int key)
{
unsigned int bucket = hash_long(key, cache->c_bucket_bits);
struct list_head *l;
struct mb_cache_entry *ce;
- mb_assert(index < mb_cache_indexes(cache));
spin_lock(&mb_cache_spinlock);
- l = cache->c_indexes_hash[index][bucket].next;
- ce = __mb_cache_entry_find(l, &cache->c_indexes_hash[index][bucket],
- index, bdev, key);
+ l = cache->c_index_hash[bucket].next;
+ ce = __mb_cache_entry_find(l, &cache->c_index_hash[bucket], bdev, key);
spin_unlock(&mb_cache_spinlock);
return ce;
}
* }
*
* @prev: The previous match
- * @index: the number of the additonal index to search (0<=index<indexes_count)
* @bdev: the device the cache entry should belong to
* @key: the key in the index
*/
struct mb_cache_entry *
-mb_cache_entry_find_next(struct mb_cache_entry *prev, int index,
+mb_cache_entry_find_next(struct mb_cache_entry *prev,
struct block_device *bdev, unsigned int key)
{
struct mb_cache *cache = prev->e_cache;
struct list_head *l;
struct mb_cache_entry *ce;
- mb_assert(index < mb_cache_indexes(cache));
spin_lock(&mb_cache_spinlock);
- l = prev->e_indexes[index].o_list.next;
- ce = __mb_cache_entry_find(l, &cache->c_indexes_hash[index][bucket],
- index, bdev, key);
+ l = prev->e_index.o_list.next;
+ ce = __mb_cache_entry_find(l, &cache->c_index_hash[bucket], bdev, key);
__mb_cache_entry_release_unlock(prev);
return ce;
}
ino = inode->i_ino;
if (ino < 1 || ino > sbi->s_ninodes) {
printk("minix_free_inode: inode 0 or nonexistent inode\n");
- goto out;
+ return;
}
bit = ino & ((1<<k) - 1);
ino >>= k;
if (ino >= sbi->s_imap_blocks) {
printk("minix_free_inode: nonexistent imap in superblock\n");
- goto out;
+ return;
}
minix_clear_inode(inode); /* clear on-disk copy */
printk("minix_free_inode: bit %lu already cleared\n", bit);
spin_unlock(&bitmap_lock);
mark_buffer_dirty(bh);
- out:
- clear_inode(inode); /* clear in-memory copy */
}
struct inode *minix_new_inode(const struct inode *dir, int mode, int *error)
got_it:
pos = page_offset(page) + p - (char *)page_address(page);
- err = __minix_write_begin(NULL, page->mapping, pos, sbi->s_dirsize,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = minix_prepare_chunk(page, pos, sbi->s_dirsize);
if (err)
goto out_unlock;
memcpy (namx, name, namelen);
int minix_delete_entry(struct minix_dir_entry *de, struct page *page)
{
- struct address_space *mapping = page->mapping;
- struct inode *inode = (struct inode*)mapping->host;
+ struct inode *inode = page->mapping->host;
char *kaddr = page_address(page);
loff_t pos = page_offset(page) + (char*)de - kaddr;
struct minix_sb_info *sbi = minix_sb(inode->i_sb);
int err;
lock_page(page);
- err = __minix_write_begin(NULL, mapping, pos, len,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = minix_prepare_chunk(page, pos, len);
if (err == 0) {
if (sbi->s_version == MINIX_V3)
((minix3_dirent *) de)->inode = 0;
int minix_make_empty(struct inode *inode, struct inode *dir)
{
- struct address_space *mapping = inode->i_mapping;
- struct page *page = grab_cache_page(mapping, 0);
+ struct page *page = grab_cache_page(inode->i_mapping, 0);
struct minix_sb_info *sbi = minix_sb(inode->i_sb);
char *kaddr;
int err;
if (!page)
return -ENOMEM;
- err = __minix_write_begin(NULL, mapping, 0, 2 * sbi->s_dirsize,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = minix_prepare_chunk(page, 0, 2 * sbi->s_dirsize);
if (err) {
unlock_page(page);
goto fail;
void minix_set_link(struct minix_dir_entry *de, struct page *page,
struct inode *inode)
{
- struct address_space *mapping = page->mapping;
- struct inode *dir = mapping->host;
+ struct inode *dir = page->mapping->host;
struct minix_sb_info *sbi = minix_sb(dir->i_sb);
loff_t pos = page_offset(page) +
(char *)de-(char*)page_address(page);
lock_page(page);
- err = __minix_write_begin(NULL, mapping, pos, sbi->s_dirsize,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = minix_prepare_chunk(page, pos, sbi->s_dirsize);
if (err == 0) {
if (sbi->s_version == MINIX_V3)
((minix3_dirent *) de)->inode = inode->i_ino;
.splice_read = generic_file_splice_read,
};
+static int minix_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
+}
+
const struct inode_operations minix_file_inode_operations = {
.truncate = minix_truncate,
+ .setattr = minix_setattr,
.getattr = minix_getattr,
};
static int minix_statfs(struct dentry *dentry, struct kstatfs *buf);
static int minix_remount (struct super_block * sb, int * flags, char * data);
-static void minix_delete_inode(struct inode *inode)
+static void minix_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
- inode->i_size = 0;
- minix_truncate(inode);
- minix_free_inode(inode);
+ if (!inode->i_nlink) {
+ inode->i_size = 0;
+ minix_truncate(inode);
+ }
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
+ if (!inode->i_nlink)
+ minix_free_inode(inode);
}
static void minix_put_super(struct super_block *sb)
.alloc_inode = minix_alloc_inode,
.destroy_inode = minix_destroy_inode,
.write_inode = minix_write_inode,
- .delete_inode = minix_delete_inode,
+ .evict_inode = minix_evict_inode,
.put_super = minix_put_super,
.statfs = minix_statfs,
.remount_fs = minix_remount,
return block_read_full_page(page,minix_get_block);
}
-int __minix_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata)
+int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len)
{
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- minix_get_block);
+ return __block_write_begin(page, pos, len, minix_get_block);
}
static int minix_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return __minix_write_begin(file, mapping, pos, len, flags, pagep, fsdata);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep,
+ minix_get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t minix_bmap(struct address_space *mapping, sector_t block)
extern void minix_free_block(struct inode *inode, unsigned long block);
extern unsigned long minix_count_free_blocks(struct minix_sb_info *sbi);
extern int minix_getattr(struct vfsmount *, struct dentry *, struct kstat *);
-extern int __minix_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata);
+extern int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len);
extern void V1_minix_truncate(struct inode *);
extern void V2_minix_truncate(struct inode *);
static __always_inline void set_root(struct nameidata *nd)
{
- if (!nd->root.mnt) {
- struct fs_struct *fs = current->fs;
- read_lock(&fs->lock);
- nd->root = fs->root;
- path_get(&nd->root);
- read_unlock(&fs->lock);
- }
+ if (!nd->root.mnt)
+ get_fs_root(current->fs, &nd->root);
}
static int link_path_walk(const char *, struct nameidata *);
{
struct vfsmount *parent;
struct dentry *mountpoint;
- spin_lock(&vfsmount_lock);
+
+ br_read_lock(vfsmount_lock);
parent = path->mnt->mnt_parent;
if (parent == path->mnt) {
- spin_unlock(&vfsmount_lock);
+ br_read_unlock(vfsmount_lock);
return 0;
}
mntget(parent);
mountpoint = dget(path->mnt->mnt_mountpoint);
- spin_unlock(&vfsmount_lock);
+ br_read_unlock(vfsmount_lock);
dput(path->dentry);
path->dentry = mountpoint;
mntput(path->mnt);
follow_mount(&nd->path);
}
+/*
+ * Allocate a dentry with name and parent, and perform a parent
+ * directory ->lookup on it. Returns the new dentry, or ERR_PTR
+ * on error. parent->d_inode->i_mutex must be held. d_lookup must
+ * have verified that no child exists while under i_mutex.
+ */
+static struct dentry *d_alloc_and_lookup(struct dentry *parent,
+ struct qstr *name, struct nameidata *nd)
+{
+ struct inode *inode = parent->d_inode;
+ struct dentry *dentry;
+ struct dentry *old;
+
+ /* Don't create child dentry for a dead directory. */
+ if (unlikely(IS_DEADDIR(inode)))
+ return ERR_PTR(-ENOENT);
+
+ dentry = d_alloc(parent, name);
+ if (unlikely(!dentry))
+ return ERR_PTR(-ENOMEM);
+
+ old = inode->i_op->lookup(inode, dentry, nd);
+ if (unlikely(old)) {
+ dput(dentry);
+ dentry = old;
+ }
+ return dentry;
+}
+
/*
* It's more convoluted than I'd like it to be, but... it's still fairly
* small and for now I'd prefer to have fast path as straight as possible.
return err;
}
+ /*
+ * Rename seqlock is not required here because in the off chance
+ * of a false negative due to a concurrent rename, we're going to
+ * do the non-racy lookup, below.
+ */
dentry = __d_lookup(nd->path.dentry, name);
if (!dentry)
goto need_lookup;
+found:
if (dentry->d_op && dentry->d_op->d_revalidate)
goto need_revalidate;
done:
mutex_lock(&dir->i_mutex);
/*
* First re-do the cached lookup just in case it was created
- * while we waited for the directory semaphore..
- *
- * FIXME! This could use version numbering or similar to
- * avoid unnecessary cache lookups.
+ * while we waited for the directory semaphore, or the first
+ * lookup failed due to an unrelated rename.
*
- * The "dcache_lock" is purely to protect the RCU list walker
- * from concurrent renames at this point (we mustn't get false
- * negatives from the RCU list walk here, unlike the optimistic
- * fast walk).
- *
- * so doing d_lookup() (with seqlock), instead of lockfree __d_lookup
+ * This could use version numbering or similar to avoid unnecessary
+ * cache lookups, but then we'd have to do the first lookup in the
+ * non-racy way. However in the common case here, everything should
+ * be hot in cache, so would it be a big win?
*/
dentry = d_lookup(parent, name);
- if (!dentry) {
- struct dentry *new;
-
- /* Don't create child dentry for a dead directory. */
- dentry = ERR_PTR(-ENOENT);
- if (IS_DEADDIR(dir))
- goto out_unlock;
-
- new = d_alloc(parent, name);
- dentry = ERR_PTR(-ENOMEM);
- if (new) {
- dentry = dir->i_op->lookup(dir, new, nd);
- if (dentry)
- dput(new);
- else
- dentry = new;
- }
-out_unlock:
+ if (likely(!dentry)) {
+ dentry = d_alloc_and_lookup(parent, name, nd);
mutex_unlock(&dir->i_mutex);
if (IS_ERR(dentry))
goto fail;
goto done;
}
-
/*
* Uhhuh! Nasty case: the cache was re-populated while
* we waited on the semaphore. Need to revalidate.
*/
mutex_unlock(&dir->i_mutex);
- if (dentry->d_op && dentry->d_op->d_revalidate) {
- dentry = do_revalidate(dentry, nd);
- if (!dentry)
- dentry = ERR_PTR(-ENOENT);
- }
- if (IS_ERR(dentry))
- goto fail;
- goto done;
+ goto found;
need_revalidate:
dentry = do_revalidate(dentry, nd);
nd->path = nd->root;
path_get(&nd->root);
} else if (dfd == AT_FDCWD) {
- struct fs_struct *fs = current->fs;
- read_lock(&fs->lock);
- nd->path = fs->pwd;
- path_get(&fs->pwd);
- read_unlock(&fs->lock);
+ get_fs_pwd(current->fs, &nd->path);
} else {
struct dentry *dentry;
goto out;
}
- dentry = __d_lookup(base, name);
-
- /* lockess __d_lookup may fail due to concurrent d_move()
- * in some unrelated directory, so try with d_lookup
+ /*
+ * Don't bother with __d_lookup: callers are for creat as
+ * well as unlink, so a lot of the time it would cost
+ * a double lookup.
*/
- if (!dentry)
- dentry = d_lookup(base, name);
+ dentry = d_lookup(base, name);
if (dentry && dentry->d_op && dentry->d_op->d_revalidate)
dentry = do_revalidate(dentry, nd);
- if (!dentry) {
- struct dentry *new;
-
- /* Don't create child dentry for a dead directory. */
- dentry = ERR_PTR(-ENOENT);
- if (IS_DEADDIR(inode))
- goto out;
-
- new = d_alloc(base, name);
- dentry = ERR_PTR(-ENOMEM);
- if (!new)
- goto out;
- dentry = inode->i_op->lookup(inode, new, nd);
- if (!dentry)
- dentry = new;
- else
- dput(new);
- }
+ if (!dentry)
+ dentry = d_alloc_and_lookup(base, name, nd);
out:
return dentry;
}
{
int error;
int is_dir = S_ISDIR(old_dentry->d_inode->i_mode);
- const char *old_name;
+ const unsigned char *old_name;
if (old_dentry->d_inode == new_dentry->d_inode)
return 0;
#include <linux/syscalls.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/percpu.h>
#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/log2.h>
#include <linux/idr.h>
#include <linux/fs_struct.h>
+#include <linux/fsnotify.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include "pnode.h"
#define HASH_SHIFT ilog2(PAGE_SIZE / sizeof(struct list_head))
#define HASH_SIZE (1UL << HASH_SHIFT)
-/* spinlock for vfsmount related operations, inplace of dcache_lock */
-__cacheline_aligned_in_smp DEFINE_SPINLOCK(vfsmount_lock);
-
static int event;
static DEFINE_IDA(mnt_id_ida);
static DEFINE_IDA(mnt_group_ida);
+static DEFINE_SPINLOCK(mnt_id_lock);
static int mnt_id_start = 0;
static int mnt_group_start = 1;
struct kobject *fs_kobj;
EXPORT_SYMBOL_GPL(fs_kobj);
+/*
+ * vfsmount lock may be taken for read to prevent changes to the
+ * vfsmount hash, ie. during mountpoint lookups or walking back
+ * up the tree.
+ *
+ * It should be taken for write in all cases where the vfsmount
+ * tree or hash is modified or when a vfsmount structure is modified.
+ */
+DEFINE_BRLOCK(vfsmount_lock);
+
static inline unsigned long hash(struct vfsmount *mnt, struct dentry *dentry)
{
unsigned long tmp = ((unsigned long)mnt / L1_CACHE_BYTES);
#define MNT_WRITER_UNDERFLOW_LIMIT -(1<<16)
-/* allocation is serialized by namespace_sem */
+/*
+ * allocation is serialized by namespace_sem, but we need the spinlock to
+ * serialize with freeing.
+ */
static int mnt_alloc_id(struct vfsmount *mnt)
{
int res;
retry:
ida_pre_get(&mnt_id_ida, GFP_KERNEL);
- spin_lock(&vfsmount_lock);
+ spin_lock(&mnt_id_lock);
res = ida_get_new_above(&mnt_id_ida, mnt_id_start, &mnt->mnt_id);
if (!res)
mnt_id_start = mnt->mnt_id + 1;
- spin_unlock(&vfsmount_lock);
+ spin_unlock(&mnt_id_lock);
if (res == -EAGAIN)
goto retry;
static void mnt_free_id(struct vfsmount *mnt)
{
int id = mnt->mnt_id;
- spin_lock(&vfsmount_lock);
+ spin_lock(&mnt_id_lock);
ida_remove(&mnt_id_ida, id);
if (mnt_id_start > id)
mnt_id_start = id;
- spin_unlock(&vfsmount_lock);
+ spin_unlock(&mnt_id_lock);
}
/*
INIT_LIST_HEAD(&mnt->mnt_share);
INIT_LIST_HEAD(&mnt->mnt_slave_list);
INIT_LIST_HEAD(&mnt->mnt_slave);
+#ifdef CONFIG_FSNOTIFY
+ INIT_HLIST_HEAD(&mnt->mnt_fsnotify_marks);
+#endif
#ifdef CONFIG_SMP
mnt->mnt_writers = alloc_percpu(int);
if (!mnt->mnt_writers)
{
int ret = 0;
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
mnt->mnt_flags |= MNT_WRITE_HOLD;
/*
* After storing MNT_WRITE_HOLD, we'll read the counters. This store
*/
smp_wmb();
mnt->mnt_flags &= ~MNT_WRITE_HOLD;
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
return ret;
}
static void __mnt_unmake_readonly(struct vfsmount *mnt)
{
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
mnt->mnt_flags &= ~MNT_READONLY;
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
}
void simple_set_mnt(struct vfsmount *mnt, struct super_block *sb)
/*
* find the first or last mount at @dentry on vfsmount @mnt depending on
* @dir. If @dir is set return the first mount else return the last mount.
+ * vfsmount_lock must be held for read or write.
*/
struct vfsmount *__lookup_mnt(struct vfsmount *mnt, struct dentry *dentry,
int dir)
struct vfsmount *lookup_mnt(struct path *path)
{
struct vfsmount *child_mnt;
- spin_lock(&vfsmount_lock);
+
+ br_read_lock(vfsmount_lock);
if ((child_mnt = __lookup_mnt(path->mnt, path->dentry, 1)))
mntget(child_mnt);
- spin_unlock(&vfsmount_lock);
+ br_read_unlock(vfsmount_lock);
return child_mnt;
}
return mnt->mnt_ns == current->nsproxy->mnt_ns;
}
+/*
+ * vfsmount lock must be held for write
+ */
static void touch_mnt_namespace(struct mnt_namespace *ns)
{
if (ns) {
}
}
+/*
+ * vfsmount lock must be held for write
+ */
static void __touch_mnt_namespace(struct mnt_namespace *ns)
{
if (ns && ns->event != event) {
}
}
+/*
+ * vfsmount lock must be held for write
+ */
static void detach_mnt(struct vfsmount *mnt, struct path *old_path)
{
old_path->dentry = mnt->mnt_mountpoint;
old_path->dentry->d_mounted--;
}
+/*
+ * vfsmount lock must be held for write
+ */
void mnt_set_mountpoint(struct vfsmount *mnt, struct dentry *dentry,
struct vfsmount *child_mnt)
{
dentry->d_mounted++;
}
+/*
+ * vfsmount lock must be held for write
+ */
static void attach_mnt(struct vfsmount *mnt, struct path *path)
{
mnt_set_mountpoint(path->mnt, path->dentry, mnt);
}
/*
- * the caller must hold vfsmount_lock
+ * vfsmount lock must be held for write
*/
static void commit_tree(struct vfsmount *mnt)
{
* provides barriers, so count_mnt_writers() below is safe. AV
*/
WARN_ON(count_mnt_writers(mnt));
+ fsnotify_vfsmount_delete(mnt);
dput(mnt->mnt_root);
free_vfsmnt(mnt);
deactivate_super(sb);
void mntput_no_expire(struct vfsmount *mnt)
{
repeat:
- if (atomic_dec_and_lock(&mnt->mnt_count, &vfsmount_lock)) {
- if (likely(!mnt->mnt_pinned)) {
- spin_unlock(&vfsmount_lock);
- __mntput(mnt);
- return;
- }
- atomic_add(mnt->mnt_pinned + 1, &mnt->mnt_count);
- mnt->mnt_pinned = 0;
- spin_unlock(&vfsmount_lock);
- acct_auto_close_mnt(mnt);
- goto repeat;
+ if (atomic_add_unless(&mnt->mnt_count, -1, 1))
+ return;
+ br_write_lock(vfsmount_lock);
+ if (!atomic_dec_and_test(&mnt->mnt_count)) {
+ br_write_unlock(vfsmount_lock);
+ return;
+ }
+ if (likely(!mnt->mnt_pinned)) {
+ br_write_unlock(vfsmount_lock);
+ __mntput(mnt);
+ return;
}
+ atomic_add(mnt->mnt_pinned + 1, &mnt->mnt_count);
+ mnt->mnt_pinned = 0;
+ br_write_unlock(vfsmount_lock);
+ acct_auto_close_mnt(mnt);
+ goto repeat;
}
-
EXPORT_SYMBOL(mntput_no_expire);
void mnt_pin(struct vfsmount *mnt)
{
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
mnt->mnt_pinned++;
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
}
EXPORT_SYMBOL(mnt_pin);
void mnt_unpin(struct vfsmount *mnt)
{
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
if (mnt->mnt_pinned) {
atomic_inc(&mnt->mnt_count);
mnt->mnt_pinned--;
}
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
}
EXPORT_SYMBOL(mnt_unpin);
struct mnt_namespace *ns = p->ns;
int res = 0;
- spin_lock(&vfsmount_lock);
+ br_read_lock(vfsmount_lock);
if (p->event != ns->event) {
p->event = ns->event;
res = 1;
}
- spin_unlock(&vfsmount_lock);
+ br_read_unlock(vfsmount_lock);
return res;
}
{ MNT_NOATIME, ",noatime" },
{ MNT_NODIRATIME, ",nodiratime" },
{ MNT_RELATIME, ",relatime" },
- { MNT_STRICTATIME, ",strictatime" },
{ 0, NULL }
};
const struct proc_fs_info *fs_infop;
int minimum_refs = 0;
struct vfsmount *p;
- spin_lock(&vfsmount_lock);
+ br_read_lock(vfsmount_lock);
for (p = mnt; p; p = next_mnt(p, mnt)) {
actual_refs += atomic_read(&p->mnt_count);
minimum_refs += 2;
}
- spin_unlock(&vfsmount_lock);
+ br_read_unlock(vfsmount_lock);
if (actual_refs > minimum_refs)
return 0;
{
int ret = 1;
down_read(&namespace_sem);
- spin_lock(&vfsmount_lock);
+ br_read_lock(vfsmount_lock);
if (propagate_mount_busy(mnt, 2))
ret = 0;
- spin_unlock(&vfsmount_lock);
+ br_read_unlock(vfsmount_lock);
up_read(&namespace_sem);
return ret;
}
if (mnt->mnt_parent != mnt) {
struct dentry *dentry;
struct vfsmount *m;
- spin_lock(&vfsmount_lock);
+
+ br_write_lock(vfsmount_lock);
dentry = mnt->mnt_mountpoint;
m = mnt->mnt_parent;
mnt->mnt_mountpoint = mnt->mnt_root;
mnt->mnt_parent = mnt;
m->mnt_ghosts--;
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
dput(dentry);
mntput(m);
}
}
}
+/*
+ * vfsmount lock must be held for write
+ * namespace_sem must be held for write
+ */
void umount_tree(struct vfsmount *mnt, int propagate, struct list_head *kill)
{
struct vfsmount *p;
}
down_write(&namespace_sem);
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
event++;
if (!(flags & MNT_DETACH))
umount_tree(mnt, 1, &umount_list);
retval = 0;
}
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
up_write(&namespace_sem);
release_mounts(&umount_list);
return retval;
q = clone_mnt(p, p->mnt_root, flag);
if (!q)
goto Enomem;
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
list_add_tail(&q->mnt_list, &res->mnt_list);
attach_mnt(q, &path);
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
}
}
return res;
Enomem:
if (res) {
LIST_HEAD(umount_list);
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
umount_tree(res, 0, &umount_list);
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
release_mounts(&umount_list);
}
return NULL;
{
LIST_HEAD(umount_list);
down_write(&namespace_sem);
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
umount_tree(mnt, 0, &umount_list);
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
up_write(&namespace_sem);
release_mounts(&umount_list);
}
if (err)
goto out_cleanup_ids;
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
if (IS_MNT_SHARED(dest_mnt)) {
for (p = source_mnt; p; p = next_mnt(p, source_mnt))
list_del_init(&child->mnt_hash);
commit_tree(child);
}
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
+
return 0;
out_cleanup_ids:
goto out_unlock;
}
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
for (m = mnt; m; m = (recurse ? next_mnt(m, mnt) : NULL))
change_mnt_propagation(m, type);
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
out_unlock:
up_write(&namespace_sem);
err = graft_tree(mnt, path);
if (err) {
LIST_HEAD(umount_list);
- spin_lock(&vfsmount_lock);
+
+ br_write_lock(vfsmount_lock);
umount_tree(mnt, 0, &umount_list);
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
release_mounts(&umount_list);
}
else
err = do_remount_sb(sb, flags, data, 0);
if (!err) {
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
mnt_flags |= path->mnt->mnt_flags & MNT_PROPAGATION_MASK;
path->mnt->mnt_flags = mnt_flags;
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
}
up_write(&sb->s_umount);
if (!err) {
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
touch_mnt_namespace(path->mnt->mnt_ns);
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
}
return err;
}
return;
down_write(&namespace_sem);
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
/* extract from the expiration list every vfsmount that matches the
* following criteria:
touch_mnt_namespace(mnt->mnt_ns);
umount_tree(mnt, 1, &umounts);
}
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
up_write(&namespace_sem);
release_mounts(&umounts);
/*
* process a list of expirable mountpoints with the intent of discarding any
* submounts of a specific parent mountpoint
+ *
+ * vfsmount_lock must be held for write
*/
static void shrink_submounts(struct vfsmount *mnt, struct list_head *umounts)
{
if (flags & MS_RDONLY)
mnt_flags |= MNT_READONLY;
- flags &= ~(MS_NOSUID | MS_NOEXEC | MS_NODEV | MS_ACTIVE |
+ flags &= ~(MS_NOSUID | MS_NOEXEC | MS_NODEV | MS_ACTIVE | MS_BORN |
MS_NOATIME | MS_NODIRATIME | MS_RELATIME| MS_KERNMOUNT |
MS_STRICTATIME);
kfree(new_ns);
return ERR_PTR(-ENOMEM);
}
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
list_add_tail(&new_ns->list, &new_ns->root->mnt_list);
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
/*
* Second pass: switch the tsk->fs->* elements and mark new vfsmounts
goto out1;
}
- read_lock(¤t->fs->lock);
- root = current->fs->root;
- path_get(¤t->fs->root);
- read_unlock(¤t->fs->lock);
+ get_fs_root(current->fs, &root);
down_write(&namespace_sem);
mutex_lock(&old.dentry->d_inode->i_mutex);
error = -EINVAL;
goto out2; /* not attached */
/* make sure we can reach put_old from new_root */
tmp = old.mnt;
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
if (tmp != new.mnt) {
for (;;) {
if (tmp->mnt_parent == tmp)
/* mount new_root on / */
attach_mnt(new.mnt, &root_parent);
touch_mnt_namespace(current->nsproxy->mnt_ns);
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
chroot_fs_refs(&root, &new);
error = 0;
path_put(&root_parent);
out0:
return error;
out3:
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
goto out2;
}
for (u = 0; u < HASH_SIZE; u++)
INIT_LIST_HEAD(&mount_hashtable[u]);
+ br_lock_init(vfsmount_lock);
+
err = sysfs_init();
if (err)
printk(KERN_WARNING "%s: sysfs_init error: %d\n",
if (!atomic_dec_and_test(&ns->count))
return;
down_write(&namespace_sem);
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
umount_tree(ns->root, 0, &umount_list);
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
up_write(&namespace_sem);
release_mounts(&umount_list);
kfree(ns);
#define NCP_DEFAULT_TIME_OUT 10
#define NCP_DEFAULT_RETRY_COUNT 20
-static void ncp_delete_inode(struct inode *);
+static void ncp_evict_inode(struct inode *);
static void ncp_put_super(struct super_block *);
static int ncp_statfs(struct dentry *, struct kstatfs *);
static int ncp_show_options(struct seq_file *, struct vfsmount *);
.alloc_inode = ncp_alloc_inode,
.destroy_inode = ncp_destroy_inode,
.drop_inode = generic_delete_inode,
- .delete_inode = ncp_delete_inode,
+ .evict_inode = ncp_evict_inode,
.put_super = ncp_put_super,
.statfs = ncp_statfs,
.remount_fs = ncp_remount,
}
static void
-ncp_delete_inode(struct inode *inode)
+ncp_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
if (S_ISDIR(inode->i_mode)) {
- DDPRINTK("ncp_delete_inode: put directory %ld\n", inode->i_ino);
+ DDPRINTK("ncp_evict_inode: put directory %ld\n", inode->i_ino);
}
if (ncp_make_closed(inode) != 0) {
/* We can't do anything but complain. */
- printk(KERN_ERR "ncp_delete_inode: could not close\n");
+ printk(KERN_ERR "ncp_evict_inode: could not close\n");
}
- clear_inode(inode);
}
static void ncp_stop_tasks(struct ncp_server *server) {
tmpattr.ia_valid = ATTR_MODE;
tmpattr.ia_mode = attr->ia_mode;
- result = inode_setattr(inode, &tmpattr);
- if (result)
- goto out;
+ setattr_copy(inode, &tmpattr);
+ mark_inode_dirty(inode);
}
}
#endif
result = ncp_make_closed(inode);
if (result)
goto out;
- {
- struct iattr tmpattr;
-
- tmpattr.ia_valid = ATTR_SIZE;
- tmpattr.ia_size = attr->ia_size;
-
- result = inode_setattr(inode, &tmpattr);
+
+ if (attr->ia_size != i_size_read(inode)) {
+ result = vmtruncate(inode, attr->ia_size);
if (result)
goto out;
+ mark_inode_dirty(inode);
}
}
if ((attr->ia_valid & ATTR_CTIME) != 0) {
NCP_FINFO(inode)->nwattr = info.attributes;
#endif
}
- if (!result)
- result = inode_setattr(inode, attr);
+ if (result)
+ goto out;
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
out:
unlock_kernel();
return result;
#include <linux/smp_lock.h>
#include <linux/vmalloc.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/ncp_fs.h>
help
Say Y here if you want NFS data to be cached locally on disc through
the general filesystem cache manager
+
+config NFS_USE_LEGACY_DNS
+ bool "Use the legacy NFS DNS resolver"
+ depends on NFS_V4
+ help
+ The kernel now provides a method for translating a host name into an
+ IP address. Select Y here if you would rather use your own DNS
+ resolver script.
+
+ If unsure, say N
+
+config NFS_USE_KERNEL_DNS
+ bool
+ depends on NFS_V4 && !NFS_USE_LEGACY_DNS
+ select DNS_RESOLVER
+ select KEYS
+ default y
unsigned short nfs_callback_tcpport6;
#define NFS_CALLBACK_MAXPORTNR (65535U)
-static int param_set_portnr(const char *val, struct kernel_param *kp)
+static int param_set_portnr(const char *val, const struct kernel_param *kp)
{
unsigned long num;
int ret;
*((unsigned int *)kp->arg) = num;
return 0;
}
-
-static int param_get_portnr(char *buffer, struct kernel_param *kp)
-{
- return param_get_uint(buffer, kp);
-}
+static struct kernel_param_ops param_ops_portnr = {
+ .set = param_set_portnr,
+ .get = param_get_uint,
+};
#define param_check_portnr(name, p) __param_check(name, p, unsigned int);
module_param_named(callback_tcpport, nfs_callback_set_tcpport, portnr, 0644);
* Resolves DNS hostnames into valid ip addresses
*/
+#ifdef CONFIG_NFS_USE_KERNEL_DNS
+
+#include <linux/sunrpc/clnt.h>
+#include <linux/dns_resolver.h>
+
+ssize_t nfs_dns_resolve_name(char *name, size_t namelen,
+ struct sockaddr *sa, size_t salen)
+{
+ ssize_t ret;
+ char *ip_addr = NULL;
+ int ip_len;
+
+ ip_len = dns_query(NULL, name, namelen, NULL, &ip_addr, NULL);
+ if (ip_len > 0)
+ ret = rpc_pton(ip_addr, ip_len, sa, salen);
+ else
+ ret = -ESRCH;
+ kfree(ip_addr);
+ return ret;
+}
+
+#else
+
#include <linux/hash.h>
#include <linux/string.h>
#include <linux/kmod.h>
nfs_cache_unregister(&nfs_dns_resolve);
}
+#endif
#define NFS_DNS_HOSTNAME_MAXLEN (128)
+
+#ifdef CONFIG_NFS_USE_KERNEL_DNS
+static inline int nfs_dns_resolver_init(void)
+{
+ return 0;
+}
+
+static inline void nfs_dns_resolver_destroy(void)
+{}
+#else
extern int nfs_dns_resolver_init(void);
extern void nfs_dns_resolver_destroy(void);
+#endif
+
extern ssize_t nfs_dns_resolve_name(char *name, size_t namelen,
struct sockaddr *sa, size_t salen);
return ino;
}
-void nfs_clear_inode(struct inode *inode)
+static void nfs_clear_inode(struct inode *inode)
{
/*
* The following should never happen...
nfs_fscache_release_inode_cookie(inode);
}
+void nfs_evict_inode(struct inode *inode)
+{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
+ nfs_clear_inode(inode);
+}
+
/**
* nfs_sync_mapping - helper to flush all mmapped dirty data to disk
*/
* to open() calls that passed nfs_atomic_lookup, but failed to call
* nfs_open().
*/
-void nfs4_clear_inode(struct inode *inode)
+void nfs4_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
/* If we are holding a delegation, return it! */
nfs_inode_return_delegation_noreclaim(inode);
/* First call standard NFS clear_inode() code */
extern struct inode *nfs_alloc_inode(struct super_block *sb);
extern void nfs_destroy_inode(struct inode *);
extern int nfs_write_inode(struct inode *, struct writeback_control *);
-extern void nfs_clear_inode(struct inode *);
+extern void nfs_evict_inode(struct inode *);
#ifdef CONFIG_NFS_V4
-extern void nfs4_clear_inode(struct inode *);
+extern void nfs4_evict_inode(struct inode *);
#endif
void nfs_zap_acl_cache(struct inode *inode);
extern int nfs_wait_bit_killable(void *word);
.write_inode = nfs_write_inode,
.put_super = nfs_put_super,
.statfs = nfs_statfs,
- .clear_inode = nfs_clear_inode,
+ .evict_inode = nfs_evict_inode,
.umount_begin = nfs_umount_begin,
.show_options = nfs_show_options,
.show_stats = nfs_show_stats,
.write_inode = nfs_write_inode,
.put_super = nfs_put_super,
.statfs = nfs_statfs,
- .clear_inode = nfs4_clear_inode,
+ .evict_inode = nfs4_evict_inode,
.umount_begin = nfs_umount_begin,
.show_options = nfs_show_options,
.show_stats = nfs_show_stats,
struct nfs4_acl *acl = NULL;
struct nfsd4_compoundres *resp = rqstp->rq_resp;
u32 minorversion = resp->cstate.minorversion;
+ struct path path = {
+ .mnt = exp->ex_path.mnt,
+ .dentry = dentry,
+ };
BUG_ON(bmval1 & NFSD_WRITEONLY_ATTRS_WORD1);
BUG_ON(bmval0 & ~nfsd_suppattrs0(minorversion));
FATTR4_WORD0_MAXNAME)) ||
(bmval1 & (FATTR4_WORD1_SPACE_AVAIL | FATTR4_WORD1_SPACE_FREE |
FATTR4_WORD1_SPACE_TOTAL))) {
- err = vfs_statfs(dentry, &statfs);
+ err = vfs_statfs(&path, &statfs);
if (err)
goto out_nfserr;
}
nfsdstats.io_read += host_err;
*count = host_err;
err = 0;
- fsnotify_access(file->f_path.dentry);
+ fsnotify_access(file);
} else
err = nfserrno(host_err);
out:
goto out_nfserr;
*cnt = host_err;
nfsdstats.io_write += host_err;
- fsnotify_modify(file->f_path.dentry);
+ fsnotify_modify(file);
/* clear setuid/setgid flag after write */
if (inode->i_mode & (S_ISUID | S_ISGID))
__be32
nfsd_statfs(struct svc_rqst *rqstp, struct svc_fh *fhp, struct kstatfs *stat, int access)
{
- __be32 err = fh_verify(rqstp, fhp, 0, NFSD_MAY_NOP | access);
- if (!err && vfs_statfs(fhp->fh_dentry,stat))
+ struct path path = {
+ .mnt = fhp->fh_export->ex_path.mnt,
+ .dentry = fhp->fh_dentry,
+ };
+ __be32 err;
+
+ err = fh_verify(rqstp, fhp, 0, NFSD_MAY_NOP | access);
+ if (!err && vfs_statfs(&path, stat))
err = nfserr_io;
return err;
}
return last_byte;
}
-static int nilfs_prepare_chunk_uninterruptible(struct page *page,
- struct address_space *mapping,
- unsigned from, unsigned to)
+static int nilfs_prepare_chunk(struct page *page, unsigned from, unsigned to)
{
loff_t pos = page_offset(page) + from;
- return block_write_begin(NULL, mapping, pos, to - from,
- AOP_FLAG_UNINTERRUPTIBLE, &page,
- NULL, nilfs_get_block);
-}
-
-static int nilfs_prepare_chunk(struct page *page,
- struct address_space *mapping,
- unsigned from, unsigned to)
-{
- loff_t pos = page_offset(page) + from;
- return block_write_begin(NULL, mapping, pos, to - from, 0, &page,
- NULL, nilfs_get_block);
+ return __block_write_begin(page, pos, to - from, nilfs_get_block);
}
static void nilfs_commit_chunk(struct page *page,
int err;
lock_page(page);
- err = nilfs_prepare_chunk_uninterruptible(page, mapping, from, to);
+ err = nilfs_prepare_chunk(page, from, to);
BUG_ON(err);
de->inode = cpu_to_le64(inode->i_ino);
nilfs_set_de_type(de, inode);
got_it:
from = (char *)de - (char *)page_address(page);
to = from + rec_len;
- err = nilfs_prepare_chunk(page, page->mapping, from, to);
+ err = nilfs_prepare_chunk(page, from, to);
if (err)
goto out_unlock;
if (de->inode) {
if (pde)
from = (char *)pde - (char *)page_address(page);
lock_page(page);
- err = nilfs_prepare_chunk(page, mapping, from, to);
+ err = nilfs_prepare_chunk(page, from, to);
BUG_ON(err);
if (pde)
pde->rec_len = nilfs_rec_len_to_disk(to - from);
if (!page)
return -ENOMEM;
- err = nilfs_prepare_chunk(page, mapping, 0, chunk_size);
+ err = nilfs_prepare_chunk(page, 0, chunk_size);
if (unlikely(err)) {
unlock_page(page);
goto fail;
struct inode *gcdat = nilfs->ns_gc_dat;
struct nilfs_inode_info *gii = NILFS_I(gcdat);
- gcdat->i_state = I_CLEAR;
+ gcdat->i_state = I_FREEING | I_CLEAR;
gii->i_flags = 0;
nilfs_palloc_clear_cache(gcdat);
#include <linux/writeback.h>
#include <linux/uio.h>
#include "nilfs.h"
+#include "btnode.h"
#include "segment.h"
#include "page.h"
#include "mdt.h"
if (unlikely(err))
return err;
- *pagep = NULL;
- err = block_write_begin(file, mapping, pos, len, flags, pagep,
- fsdata, nilfs_get_block);
- if (unlikely(err))
+ err = block_write_begin(mapping, pos, len, flags, pagep,
+ nilfs_get_block);
+ if (unlikely(err)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+
nilfs_transaction_abort(inode->i_sb);
+ }
return err;
}
/* Needs synchronization with the cleaner */
size = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs, nilfs_get_block, NULL);
+
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && size < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+
return size;
}
struct super_block *sb = inode->i_sb;
struct nilfs_sb_info *sbi = NILFS_SB(sb);
- clear_inode(inode);
/* XXX: check error code? Is there any thing I can do? */
(void) nilfs_ifile_delete_inode(sbi->s_ifile, inode->i_ino);
atomic_dec(&sbi->s_inodes_count);
But truncate has no return value. */
}
-void nilfs_delete_inode(struct inode *inode)
+static void nilfs_clear_inode(struct inode *inode)
+{
+ struct nilfs_inode_info *ii = NILFS_I(inode);
+
+ /*
+ * Free resources allocated in nilfs_read_inode(), here.
+ */
+ BUG_ON(!list_empty(&ii->i_dirty));
+ brelse(ii->i_bh);
+ ii->i_bh = NULL;
+
+ if (test_bit(NILFS_I_BMAP, &ii->i_state))
+ nilfs_bmap_clear(ii->i_bmap);
+
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
+}
+
+void nilfs_evict_inode(struct inode *inode)
{
struct nilfs_transaction_info ti;
struct super_block *sb = inode->i_sb;
struct nilfs_inode_info *ii = NILFS_I(inode);
- if (unlikely(is_bad_inode(inode))) {
+ if (inode->i_nlink || unlikely(is_bad_inode(inode))) {
if (inode->i_data.nrpages)
truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ end_writeback(inode);
+ nilfs_clear_inode(inode);
return;
}
nilfs_transaction_begin(sb, &ti, 0); /* never fails */
nilfs_truncate_bmap(ii, 0);
nilfs_mark_inode_dirty(inode);
+ end_writeback(inode);
+ nilfs_clear_inode(inode);
nilfs_free_inode(inode);
/* nilfs_free_inode() marks inode buffer dirty */
if (IS_SYNC(inode))
err = nilfs_transaction_begin(sb, &ti, 0);
if (unlikely(err))
return err;
- err = inode_setattr(inode, iattr);
- if (!err && (iattr->ia_valid & ATTR_MODE))
+
+ if ((iattr->ia_valid & ATTR_SIZE) &&
+ iattr->ia_size != i_size_read(inode)) {
+ err = vmtruncate(inode, iattr->ia_size);
+ if (unlikely(err))
+ goto out_err;
+ }
+
+ setattr_copy(inode, iattr);
+ mark_inode_dirty(inode);
+
+ if (iattr->ia_valid & ATTR_MODE) {
err = nilfs_acl_chmod(inode);
- if (likely(!err))
- err = nilfs_transaction_commit(sb);
- else
- nilfs_transaction_abort(sb);
+ if (unlikely(err))
+ goto out_err;
+ }
+
+ return nilfs_transaction_commit(sb);
+out_err:
+ nilfs_transaction_abort(sb);
return err;
}
extern struct inode *nilfs_iget(struct super_block *, unsigned long);
extern void nilfs_update_inode(struct inode *, struct buffer_head *);
extern void nilfs_truncate(struct inode *);
-extern void nilfs_delete_inode(struct inode *);
+extern void nilfs_evict_inode(struct inode *);
extern int nilfs_setattr(struct dentry *, struct iattr *);
extern int nilfs_load_inode_block(struct nilfs_sb_info *, struct inode *,
struct buffer_head **);
}
pos = rb->blkoff << inode->i_blkbits;
- page = NULL;
- err = block_write_begin(NULL, inode->i_mapping, pos, blocksize,
- 0, &page, NULL, nilfs_get_block);
- if (unlikely(err))
+ err = block_write_begin(inode->i_mapping, pos, blocksize,
+ 0, &page, nilfs_get_block);
+ if (unlikely(err)) {
+ loff_t isize = inode->i_size;
+ if (pos + blocksize > isize)
+ vmtruncate(inode, isize);
goto failed_inode;
+ }
err = nilfs_recovery_copy_block(nilfs, rb, page);
if (unlikely(err))
* Last BIO is always sent through the following
* submission.
*/
- rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
+ rw |= REQ_SYNC | REQ_UNPLUG;
res = nilfs_segbuf_submit_bio(segbuf, &wi, rw);
}
kmem_cache_free(nilfs_inode_cachep, NILFS_I(inode));
}
-static void nilfs_clear_inode(struct inode *inode)
-{
- struct nilfs_inode_info *ii = NILFS_I(inode);
-
- /*
- * Free resources allocated in nilfs_read_inode(), here.
- */
- BUG_ON(!list_empty(&ii->i_dirty));
- brelse(ii->i_bh);
- ii->i_bh = NULL;
-
- if (test_bit(NILFS_I_BMAP, &ii->i_state))
- nilfs_bmap_clear(ii->i_bmap);
-
- nilfs_btnode_cache_clear(&ii->i_btnode_cache);
-}
-
static int nilfs_sync_super(struct nilfs_sb_info *sbi, int flag)
{
struct the_nilfs *nilfs = sbi->s_nilfs;
int err;
- int barrier_done = 0;
- if (nilfs_test_opt(sbi, BARRIER)) {
- set_buffer_ordered(nilfs->ns_sbh[0]);
- barrier_done = 1;
- }
retry:
set_buffer_dirty(nilfs->ns_sbh[0]);
- err = sync_dirty_buffer(nilfs->ns_sbh[0]);
- if (err == -EOPNOTSUPP && barrier_done) {
- nilfs_warning(sbi->s_super, __func__,
- "barrier-based sync failed. "
- "disabling barriers\n");
- nilfs_clear_opt(sbi, BARRIER);
- barrier_done = 0;
- clear_buffer_ordered(nilfs->ns_sbh[0]);
- goto retry;
+
+ if (nilfs_test_opt(sbi, BARRIER)) {
+ err = __sync_dirty_buffer(nilfs->ns_sbh[0],
+ WRITE_SYNC | WRITE_BARRIER);
+ if (err == -EOPNOTSUPP) {
+ nilfs_warning(sbi->s_super, __func__,
+ "barrier-based sync failed. "
+ "disabling barriers\n");
+ nilfs_clear_opt(sbi, BARRIER);
+ goto retry;
+ }
+ } else {
+ err = sync_dirty_buffer(nilfs->ns_sbh[0]);
}
+
if (unlikely(err)) {
printk(KERN_ERR
"NILFS: unable to write superblock (err=%d)\n", err);
list_add(&sbi->s_list, &nilfs->ns_supers);
up_write(&nilfs->ns_super_sem);
+ err = -ENOMEM;
sbi->s_ifile = nilfs_ifile_new(sbi, nilfs->ns_inode_size);
if (!sbi->s_ifile)
- return -ENOMEM;
+ goto delist;
down_read(&nilfs->ns_segctor_sem);
err = nilfs_cpfile_get_checkpoint(nilfs->ns_cpfile, cno, 0, &raw_cp,
nilfs_mdt_destroy(sbi->s_ifile);
sbi->s_ifile = NULL;
+ delist:
down_write(&nilfs->ns_super_sem);
list_del_init(&sbi->s_list);
up_write(&nilfs->ns_super_sem);
/* .write_inode = nilfs_write_inode, */
/* .put_inode = nilfs_put_inode, */
/* .drop_inode = nilfs_drop_inode, */
- .delete_inode = nilfs_delete_inode,
+ .evict_inode = nilfs_evict_inode,
.put_super = nilfs_put_super,
/* .write_super = nilfs_write_super, */
.sync_fs = nilfs_sync_fs,
/* .unlockfs */
.statfs = nilfs_statfs,
.remount_fs = nilfs_remount,
- .clear_inode = nilfs_clear_inode,
/* .umount_begin */
.show_options = nilfs_show_options
};
return -EINVAL;
}
- if (swp) {
+ if (!valid[!swp])
printk(KERN_WARNING "NILFS warning: broken superblock. "
"using spare superblock.\n");
+ if (swp)
nilfs_swap_super_block(nilfs);
- }
nilfs->ns_sbwcount = 0;
nilfs->ns_sbwtime = le64_to_cpu(sbp[0]->s_wtime);
source "fs/notify/dnotify/Kconfig"
source "fs/notify/inotify/Kconfig"
+source "fs/notify/fanotify/Kconfig"
-obj-$(CONFIG_FSNOTIFY) += fsnotify.o notification.o group.o inode_mark.o
+obj-$(CONFIG_FSNOTIFY) += fsnotify.o notification.o group.o inode_mark.o \
+ mark.o vfsmount_mark.o
obj-y += dnotify/
obj-y += inotify/
+obj-y += fanotify/
int dir_notify_enable __read_mostly = 1;
static struct kmem_cache *dnotify_struct_cache __read_mostly;
-static struct kmem_cache *dnotify_mark_entry_cache __read_mostly;
+static struct kmem_cache *dnotify_mark_cache __read_mostly;
static struct fsnotify_group *dnotify_group __read_mostly;
static DEFINE_MUTEX(dnotify_mark_mutex);
/*
- * dnotify will attach one of these to each inode (i_fsnotify_mark_entries) which
+ * dnotify will attach one of these to each inode (i_fsnotify_marks) which
* is being watched by dnotify. If multiple userspace applications are watching
* the same directory with dnotify their information is chained in dn
*/
-struct dnotify_mark_entry {
- struct fsnotify_mark_entry fsn_entry;
+struct dnotify_mark {
+ struct fsnotify_mark fsn_mark;
struct dnotify_struct *dn;
};
* it calls the fsnotify function so it can update the set of all events relevant
* to this inode.
*/
-static void dnotify_recalc_inode_mask(struct fsnotify_mark_entry *entry)
+static void dnotify_recalc_inode_mask(struct fsnotify_mark *fsn_mark)
{
__u32 new_mask, old_mask;
struct dnotify_struct *dn;
- struct dnotify_mark_entry *dnentry = container_of(entry,
- struct dnotify_mark_entry,
- fsn_entry);
+ struct dnotify_mark *dn_mark = container_of(fsn_mark,
+ struct dnotify_mark,
+ fsn_mark);
- assert_spin_locked(&entry->lock);
+ assert_spin_locked(&fsn_mark->lock);
- old_mask = entry->mask;
+ old_mask = fsn_mark->mask;
new_mask = 0;
- for (dn = dnentry->dn; dn != NULL; dn = dn->dn_next)
+ for (dn = dn_mark->dn; dn != NULL; dn = dn->dn_next)
new_mask |= (dn->dn_mask & ~FS_DN_MULTISHOT);
- entry->mask = new_mask;
+ fsnotify_set_mark_mask_locked(fsn_mark, new_mask);
if (old_mask == new_mask)
return;
- if (entry->inode)
- fsnotify_recalc_inode_mask(entry->inode);
+ if (fsn_mark->i.inode)
+ fsnotify_recalc_inode_mask(fsn_mark->i.inode);
}
/*
* events.
*/
static int dnotify_handle_event(struct fsnotify_group *group,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
struct fsnotify_event *event)
{
- struct fsnotify_mark_entry *entry = NULL;
- struct dnotify_mark_entry *dnentry;
+ struct dnotify_mark *dn_mark;
struct inode *to_tell;
struct dnotify_struct *dn;
struct dnotify_struct **prev;
struct fown_struct *fown;
__u32 test_mask = event->mask & ~FS_EVENT_ON_CHILD;
- to_tell = event->to_tell;
+ BUG_ON(vfsmount_mark);
- spin_lock(&to_tell->i_lock);
- entry = fsnotify_find_mark_entry(group, to_tell);
- spin_unlock(&to_tell->i_lock);
+ to_tell = event->to_tell;
- /* unlikely since we alreay passed dnotify_should_send_event() */
- if (unlikely(!entry))
- return 0;
- dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
+ dn_mark = container_of(inode_mark, struct dnotify_mark, fsn_mark);
- spin_lock(&entry->lock);
- prev = &dnentry->dn;
+ spin_lock(&inode_mark->lock);
+ prev = &dn_mark->dn;
while ((dn = *prev) != NULL) {
if ((dn->dn_mask & test_mask) == 0) {
prev = &dn->dn_next;
else {
*prev = dn->dn_next;
kmem_cache_free(dnotify_struct_cache, dn);
- dnotify_recalc_inode_mask(entry);
+ dnotify_recalc_inode_mask(inode_mark);
}
}
- spin_unlock(&entry->lock);
- fsnotify_put_mark(entry);
+ spin_unlock(&inode_mark->lock);
return 0;
}
* userspace notification for that pair.
*/
static bool dnotify_should_send_event(struct fsnotify_group *group,
- struct inode *inode, __u32 mask)
+ struct inode *inode,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
+ __u32 mask, void *data, int data_type)
{
- struct fsnotify_mark_entry *entry;
- bool send;
-
- /* !dir_notify_enable should never get here, don't waste time checking
- if (!dir_notify_enable)
- return 0; */
-
/* not a dir, dnotify doesn't care */
if (!S_ISDIR(inode->i_mode))
return false;
- spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(group, inode);
- spin_unlock(&inode->i_lock);
-
- /* no mark means no dnotify watch */
- if (!entry)
- return false;
-
- mask = (mask & ~FS_EVENT_ON_CHILD);
- send = (mask & entry->mask);
-
- fsnotify_put_mark(entry); /* matches fsnotify_find_mark_entry */
-
- return send;
+ return true;
}
-static void dnotify_free_mark(struct fsnotify_mark_entry *entry)
+static void dnotify_free_mark(struct fsnotify_mark *fsn_mark)
{
- struct dnotify_mark_entry *dnentry = container_of(entry,
- struct dnotify_mark_entry,
- fsn_entry);
+ struct dnotify_mark *dn_mark = container_of(fsn_mark,
+ struct dnotify_mark,
+ fsn_mark);
- BUG_ON(dnentry->dn);
+ BUG_ON(dn_mark->dn);
- kmem_cache_free(dnotify_mark_entry_cache, dnentry);
+ kmem_cache_free(dnotify_mark_cache, dn_mark);
}
static struct fsnotify_ops dnotify_fsnotify_ops = {
/*
* Called every time a file is closed. Looks first for a dnotify mark on the
- * inode. If one is found run all of the ->dn entries attached to that
+ * inode. If one is found run all of the ->dn structures attached to that
* mark for one relevant to this process closing the file and remove that
* dnotify_struct. If that was the last dnotify_struct also remove the
- * fsnotify_mark_entry.
+ * fsnotify_mark.
*/
void dnotify_flush(struct file *filp, fl_owner_t id)
{
- struct fsnotify_mark_entry *entry;
- struct dnotify_mark_entry *dnentry;
+ struct fsnotify_mark *fsn_mark;
+ struct dnotify_mark *dn_mark;
struct dnotify_struct *dn;
struct dnotify_struct **prev;
struct inode *inode;
if (!S_ISDIR(inode->i_mode))
return;
- spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(dnotify_group, inode);
- spin_unlock(&inode->i_lock);
- if (!entry)
+ fsn_mark = fsnotify_find_inode_mark(dnotify_group, inode);
+ if (!fsn_mark)
return;
- dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
+ dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
mutex_lock(&dnotify_mark_mutex);
- spin_lock(&entry->lock);
- prev = &dnentry->dn;
+ spin_lock(&fsn_mark->lock);
+ prev = &dn_mark->dn;
while ((dn = *prev) != NULL) {
if ((dn->dn_owner == id) && (dn->dn_filp == filp)) {
*prev = dn->dn_next;
kmem_cache_free(dnotify_struct_cache, dn);
- dnotify_recalc_inode_mask(entry);
+ dnotify_recalc_inode_mask(fsn_mark);
break;
}
prev = &dn->dn_next;
}
- spin_unlock(&entry->lock);
+ spin_unlock(&fsn_mark->lock);
/* nothing else could have found us thanks to the dnotify_mark_mutex */
- if (dnentry->dn == NULL)
- fsnotify_destroy_mark_by_entry(entry);
-
- fsnotify_recalc_group_mask(dnotify_group);
+ if (dn_mark->dn == NULL)
+ fsnotify_destroy_mark(fsn_mark);
mutex_unlock(&dnotify_mark_mutex);
- fsnotify_put_mark(entry);
+ fsnotify_put_mark(fsn_mark);
}
/* this conversion is done only at watch creation */
/*
* If multiple processes watch the same inode with dnotify there is only one
- * dnotify mark in inode->i_fsnotify_mark_entries but we chain a dnotify_struct
+ * dnotify mark in inode->i_fsnotify_marks but we chain a dnotify_struct
* onto that mark. This function either attaches the new dnotify_struct onto
* that list, or it |= the mask onto an existing dnofiy_struct.
*/
-static int attach_dn(struct dnotify_struct *dn, struct dnotify_mark_entry *dnentry,
+static int attach_dn(struct dnotify_struct *dn, struct dnotify_mark *dn_mark,
fl_owner_t id, int fd, struct file *filp, __u32 mask)
{
struct dnotify_struct *odn;
- odn = dnentry->dn;
+ odn = dn_mark->dn;
while (odn != NULL) {
/* adding more events to existing dnofiy_struct? */
if ((odn->dn_owner == id) && (odn->dn_filp == filp)) {
dn->dn_fd = fd;
dn->dn_filp = filp;
dn->dn_owner = id;
- dn->dn_next = dnentry->dn;
- dnentry->dn = dn;
+ dn->dn_next = dn_mark->dn;
+ dn_mark->dn = dn;
return 0;
}
*/
int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
{
- struct dnotify_mark_entry *new_dnentry, *dnentry;
- struct fsnotify_mark_entry *new_entry, *entry;
+ struct dnotify_mark *new_dn_mark, *dn_mark;
+ struct fsnotify_mark *new_fsn_mark, *fsn_mark;
struct dnotify_struct *dn;
struct inode *inode;
fl_owner_t id = current->files;
__u32 mask;
/* we use these to tell if we need to kfree */
- new_entry = NULL;
+ new_fsn_mark = NULL;
dn = NULL;
if (!dir_notify_enable) {
}
/* new fsnotify mark, we expect most fcntl calls to add a new mark */
- new_dnentry = kmem_cache_alloc(dnotify_mark_entry_cache, GFP_KERNEL);
- if (!new_dnentry) {
+ new_dn_mark = kmem_cache_alloc(dnotify_mark_cache, GFP_KERNEL);
+ if (!new_dn_mark) {
error = -ENOMEM;
goto out_err;
}
/* convert the userspace DN_* "arg" to the internal FS_* defines in fsnotify */
mask = convert_arg(arg);
- /* set up the new_entry and new_dnentry */
- new_entry = &new_dnentry->fsn_entry;
- fsnotify_init_mark(new_entry, dnotify_free_mark);
- new_entry->mask = mask;
- new_dnentry->dn = NULL;
+ /* set up the new_fsn_mark and new_dn_mark */
+ new_fsn_mark = &new_dn_mark->fsn_mark;
+ fsnotify_init_mark(new_fsn_mark, dnotify_free_mark);
+ new_fsn_mark->mask = mask;
+ new_dn_mark->dn = NULL;
/* this is needed to prevent the fcntl/close race described below */
mutex_lock(&dnotify_mark_mutex);
- /* add the new_entry or find an old one. */
- spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(dnotify_group, inode);
- spin_unlock(&inode->i_lock);
- if (entry) {
- dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
- spin_lock(&entry->lock);
+ /* add the new_fsn_mark or find an old one. */
+ fsn_mark = fsnotify_find_inode_mark(dnotify_group, inode);
+ if (fsn_mark) {
+ dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
+ spin_lock(&fsn_mark->lock);
} else {
- fsnotify_add_mark(new_entry, dnotify_group, inode);
- spin_lock(&new_entry->lock);
- entry = new_entry;
- dnentry = new_dnentry;
- /* we used new_entry, so don't free it */
- new_entry = NULL;
+ fsnotify_add_mark(new_fsn_mark, dnotify_group, inode, NULL, 0);
+ spin_lock(&new_fsn_mark->lock);
+ fsn_mark = new_fsn_mark;
+ dn_mark = new_dn_mark;
+ /* we used new_fsn_mark, so don't free it */
+ new_fsn_mark = NULL;
}
rcu_read_lock();
/* if (f != filp) means that we lost a race and another task/thread
* actually closed the fd we are still playing with before we grabbed
- * the dnotify_mark_mutex and entry->lock. Since closing the fd is the
- * only time we clean up the mark entries we need to get our mark off
+ * the dnotify_mark_mutex and fsn_mark->lock. Since closing the fd is the
+ * only time we clean up the marks we need to get our mark off
* the list. */
if (f != filp) {
/* if we added ourselves, shoot ourselves, it's possible that
- * the flush actually did shoot this entry. That's fine too
+ * the flush actually did shoot this fsn_mark. That's fine too
* since multiple calls to destroy_mark is perfectly safe, if
- * we found a dnentry already attached to the inode, just sod
+ * we found a dn_mark already attached to the inode, just sod
* off silently as the flush at close time dealt with it.
*/
- if (dnentry == new_dnentry)
+ if (dn_mark == new_dn_mark)
destroy = 1;
goto out;
}
error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
if (error) {
/* if we added, we must shoot */
- if (dnentry == new_dnentry)
+ if (dn_mark == new_dn_mark)
destroy = 1;
goto out;
}
- error = attach_dn(dn, dnentry, id, fd, filp, mask);
- /* !error means that we attached the dn to the dnentry, so don't free it */
+ error = attach_dn(dn, dn_mark, id, fd, filp, mask);
+ /* !error means that we attached the dn to the dn_mark, so don't free it */
if (!error)
dn = NULL;
/* -EEXIST means that we didn't add this new dn and used an old one.
else if (error == -EEXIST)
error = 0;
- dnotify_recalc_inode_mask(entry);
+ dnotify_recalc_inode_mask(fsn_mark);
out:
- spin_unlock(&entry->lock);
+ spin_unlock(&fsn_mark->lock);
if (destroy)
- fsnotify_destroy_mark_by_entry(entry);
-
- fsnotify_recalc_group_mask(dnotify_group);
+ fsnotify_destroy_mark(fsn_mark);
mutex_unlock(&dnotify_mark_mutex);
- fsnotify_put_mark(entry);
+ fsnotify_put_mark(fsn_mark);
out_err:
- if (new_entry)
- fsnotify_put_mark(new_entry);
+ if (new_fsn_mark)
+ fsnotify_put_mark(new_fsn_mark);
if (dn)
kmem_cache_free(dnotify_struct_cache, dn);
return error;
static int __init dnotify_init(void)
{
dnotify_struct_cache = KMEM_CACHE(dnotify_struct, SLAB_PANIC);
- dnotify_mark_entry_cache = KMEM_CACHE(dnotify_mark_entry, SLAB_PANIC);
+ dnotify_mark_cache = KMEM_CACHE(dnotify_mark, SLAB_PANIC);
- dnotify_group = fsnotify_obtain_group(DNOTIFY_GROUP_NUM,
- 0, &dnotify_fsnotify_ops);
+ dnotify_group = fsnotify_alloc_group(&dnotify_fsnotify_ops);
if (IS_ERR(dnotify_group))
panic("unable to allocate fsnotify group for dnotify\n");
return 0;
--- /dev/null
+config FANOTIFY
+ bool "Filesystem wide access notification"
+ select FSNOTIFY
+ select ANON_INODES
+ default n
+ ---help---
+ Say Y here to enable fanotify suport. fanotify is a file access
+ notification system which differs from inotify in that it sends
+ and open file descriptor to the userspace listener along with
+ the event.
+
+ If unsure, say Y.
+
+config FANOTIFY_ACCESS_PERMISSIONS
+ bool "fanotify permissions checking"
+ depends on FANOTIFY
+ depends on SECURITY
+ default n
+ ---help---
+ Say Y here is you want fanotify listeners to be able to make permissions
+ decisions concerning filesystem events. This is used by some fanotify
+ listeners which need to scan files before allowing the system access to
+ use those files. This is used by some anti-malware vendors and by some
+ hierarchical storage managent systems.
+
+ If unsure, say N.
--- /dev/null
+obj-$(CONFIG_FANOTIFY) += fanotify.o fanotify_user.o
--- /dev/null
+#include <linux/fanotify.h>
+#include <linux/fdtable.h>
+#include <linux/fsnotify_backend.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h> /* UINT_MAX */
+#include <linux/mount.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+
+static bool should_merge(struct fsnotify_event *old, struct fsnotify_event *new)
+{
+ pr_debug("%s: old=%p new=%p\n", __func__, old, new);
+
+ if (old->to_tell == new->to_tell &&
+ old->data_type == new->data_type &&
+ old->tgid == new->tgid) {
+ switch (old->data_type) {
+ case (FSNOTIFY_EVENT_PATH):
+ if ((old->path.mnt == new->path.mnt) &&
+ (old->path.dentry == new->path.dentry))
+ return true;
+ case (FSNOTIFY_EVENT_NONE):
+ return true;
+ default:
+ BUG();
+ };
+ }
+ return false;
+}
+
+/* and the list better be locked by something too! */
+static struct fsnotify_event *fanotify_merge(struct list_head *list,
+ struct fsnotify_event *event)
+{
+ struct fsnotify_event_holder *test_holder;
+ struct fsnotify_event *test_event = NULL;
+ struct fsnotify_event *new_event;
+
+ pr_debug("%s: list=%p event=%p\n", __func__, list, event);
+
+
+ list_for_each_entry_reverse(test_holder, list, event_list) {
+ if (should_merge(test_holder->event, event)) {
+ test_event = test_holder->event;
+ break;
+ }
+ }
+
+ if (!test_event)
+ return NULL;
+
+ fsnotify_get_event(test_event);
+
+ /* if they are exactly the same we are done */
+ if (test_event->mask == event->mask)
+ return test_event;
+
+ /*
+ * if the refcnt == 2 this is the only queue
+ * for this event and so we can update the mask
+ * in place.
+ */
+ if (atomic_read(&test_event->refcnt) == 2) {
+ test_event->mask |= event->mask;
+ return test_event;
+ }
+
+ new_event = fsnotify_clone_event(test_event);
+
+ /* done with test_event */
+ fsnotify_put_event(test_event);
+
+ /* couldn't allocate memory, merge was not possible */
+ if (unlikely(!new_event))
+ return ERR_PTR(-ENOMEM);
+
+ /* build new event and replace it on the list */
+ new_event->mask = (test_event->mask | event->mask);
+ fsnotify_replace_event(test_holder, new_event);
+
+ /* we hold a reference on new_event from clone_event */
+ return new_event;
+}
+
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+static int fanotify_get_response_from_access(struct fsnotify_group *group,
+ struct fsnotify_event *event)
+{
+ int ret;
+
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
+
+ wait_event(group->fanotify_data.access_waitq, event->response);
+
+ /* userspace responded, convert to something usable */
+ spin_lock(&event->lock);
+ switch (event->response) {
+ case FAN_ALLOW:
+ ret = 0;
+ break;
+ case FAN_DENY:
+ default:
+ ret = -EPERM;
+ }
+ event->response = 0;
+ spin_unlock(&event->lock);
+
+ pr_debug("%s: group=%p event=%p about to return ret=%d\n", __func__,
+ group, event, ret);
+
+ return ret;
+}
+#endif
+
+static int fanotify_handle_event(struct fsnotify_group *group,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *fanotify_mark,
+ struct fsnotify_event *event)
+{
+ int ret = 0;
+ struct fsnotify_event *notify_event = NULL;
+
+ BUILD_BUG_ON(FAN_ACCESS != FS_ACCESS);
+ BUILD_BUG_ON(FAN_MODIFY != FS_MODIFY);
+ BUILD_BUG_ON(FAN_CLOSE_NOWRITE != FS_CLOSE_NOWRITE);
+ BUILD_BUG_ON(FAN_CLOSE_WRITE != FS_CLOSE_WRITE);
+ BUILD_BUG_ON(FAN_OPEN != FS_OPEN);
+ BUILD_BUG_ON(FAN_EVENT_ON_CHILD != FS_EVENT_ON_CHILD);
+ BUILD_BUG_ON(FAN_Q_OVERFLOW != FS_Q_OVERFLOW);
+ BUILD_BUG_ON(FAN_OPEN_PERM != FS_OPEN_PERM);
+ BUILD_BUG_ON(FAN_ACCESS_PERM != FS_ACCESS_PERM);
+
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
+
+ notify_event = fsnotify_add_notify_event(group, event, NULL, fanotify_merge);
+ if (IS_ERR(notify_event))
+ return PTR_ERR(notify_event);
+
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ if (event->mask & FAN_ALL_PERM_EVENTS) {
+ /* if we merged we need to wait on the new event */
+ if (notify_event)
+ event = notify_event;
+ ret = fanotify_get_response_from_access(group, event);
+ }
+#endif
+
+ if (notify_event)
+ fsnotify_put_event(notify_event);
+
+ return ret;
+}
+
+static bool fanotify_should_send_event(struct fsnotify_group *group,
+ struct inode *to_tell,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmnt_mark,
+ __u32 event_mask, void *data, int data_type)
+{
+ __u32 marks_mask, marks_ignored_mask;
+
+ pr_debug("%s: group=%p to_tell=%p inode_mark=%p vfsmnt_mark=%p "
+ "mask=%x data=%p data_type=%d\n", __func__, group, to_tell,
+ inode_mark, vfsmnt_mark, event_mask, data, data_type);
+
+ pr_debug("%s: group=%p vfsmount_mark=%p inode_mark=%p mask=%x\n",
+ __func__, group, vfsmnt_mark, inode_mark, event_mask);
+
+ /* sorry, fanotify only gives a damn about files and dirs */
+ if (!S_ISREG(to_tell->i_mode) &&
+ !S_ISDIR(to_tell->i_mode))
+ return false;
+
+ /* if we don't have enough info to send an event to userspace say no */
+ if (data_type != FSNOTIFY_EVENT_PATH)
+ return false;
+
+ if (inode_mark && vfsmnt_mark) {
+ marks_mask = (vfsmnt_mark->mask | inode_mark->mask);
+ marks_ignored_mask = (vfsmnt_mark->ignored_mask | inode_mark->ignored_mask);
+ } else if (inode_mark) {
+ /*
+ * if the event is for a child and this inode doesn't care about
+ * events on the child, don't send it!
+ */
+ if ((event_mask & FS_EVENT_ON_CHILD) &&
+ !(inode_mark->mask & FS_EVENT_ON_CHILD))
+ return false;
+ marks_mask = inode_mark->mask;
+ marks_ignored_mask = inode_mark->ignored_mask;
+ } else if (vfsmnt_mark) {
+ marks_mask = vfsmnt_mark->mask;
+ marks_ignored_mask = vfsmnt_mark->ignored_mask;
+ } else {
+ BUG();
+ }
+
+ if (event_mask & marks_mask & ~marks_ignored_mask)
+ return true;
+
+ return false;
+}
+
+const struct fsnotify_ops fanotify_fsnotify_ops = {
+ .handle_event = fanotify_handle_event,
+ .should_send_event = fanotify_should_send_event,
+ .free_group_priv = NULL,
+ .free_event_priv = NULL,
+ .freeing_mark = NULL,
+};
--- /dev/null
+#include <linux/fanotify.h>
+#include <linux/fcntl.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/anon_inodes.h>
+#include <linux/fsnotify_backend.h>
+#include <linux/init.h>
+#include <linux/mount.h>
+#include <linux/namei.h>
+#include <linux/poll.h>
+#include <linux/security.h>
+#include <linux/syscalls.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+#include <asm/ioctls.h>
+
+extern const struct fsnotify_ops fanotify_fsnotify_ops;
+
+static struct kmem_cache *fanotify_mark_cache __read_mostly;
+static struct kmem_cache *fanotify_response_event_cache __read_mostly;
+
+struct fanotify_response_event {
+ struct list_head list;
+ __s32 fd;
+ struct fsnotify_event *event;
+};
+
+/*
+ * Get an fsnotify notification event if one exists and is small
+ * enough to fit in "count". Return an error pointer if the count
+ * is not large enough.
+ *
+ * Called with the group->notification_mutex held.
+ */
+static struct fsnotify_event *get_one_event(struct fsnotify_group *group,
+ size_t count)
+{
+ BUG_ON(!mutex_is_locked(&group->notification_mutex));
+
+ pr_debug("%s: group=%p count=%zd\n", __func__, group, count);
+
+ if (fsnotify_notify_queue_is_empty(group))
+ return NULL;
+
+ if (FAN_EVENT_METADATA_LEN > count)
+ return ERR_PTR(-EINVAL);
+
+ /* held the notification_mutex the whole time, so this is the
+ * same event we peeked above */
+ return fsnotify_remove_notify_event(group);
+}
+
+static int create_fd(struct fsnotify_group *group, struct fsnotify_event *event)
+{
+ int client_fd;
+ struct dentry *dentry;
+ struct vfsmount *mnt;
+ struct file *new_file;
+
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
+
+ client_fd = get_unused_fd();
+ if (client_fd < 0)
+ return client_fd;
+
+ if (event->data_type != FSNOTIFY_EVENT_PATH) {
+ WARN_ON(1);
+ put_unused_fd(client_fd);
+ return -EINVAL;
+ }
+
+ /*
+ * we need a new file handle for the userspace program so it can read even if it was
+ * originally opened O_WRONLY.
+ */
+ dentry = dget(event->path.dentry);
+ mnt = mntget(event->path.mnt);
+ /* it's possible this event was an overflow event. in that case dentry and mnt
+ * are NULL; That's fine, just don't call dentry open */
+ if (dentry && mnt)
+ new_file = dentry_open(dentry, mnt,
+ group->fanotify_data.f_flags | FMODE_NONOTIFY,
+ current_cred());
+ else
+ new_file = ERR_PTR(-EOVERFLOW);
+ if (IS_ERR(new_file)) {
+ /*
+ * we still send an event even if we can't open the file. this
+ * can happen when say tasks are gone and we try to open their
+ * /proc files or we try to open a WRONLY file like in sysfs
+ * we just send the errno to userspace since there isn't much
+ * else we can do.
+ */
+ put_unused_fd(client_fd);
+ client_fd = PTR_ERR(new_file);
+ } else {
+ fd_install(client_fd, new_file);
+ }
+
+ return client_fd;
+}
+
+static ssize_t fill_event_metadata(struct fsnotify_group *group,
+ struct fanotify_event_metadata *metadata,
+ struct fsnotify_event *event)
+{
+ pr_debug("%s: group=%p metadata=%p event=%p\n", __func__,
+ group, metadata, event);
+
+ metadata->event_len = FAN_EVENT_METADATA_LEN;
+ metadata->vers = FANOTIFY_METADATA_VERSION;
+ metadata->mask = event->mask & FAN_ALL_OUTGOING_EVENTS;
+ metadata->pid = pid_vnr(event->tgid);
+ metadata->fd = create_fd(group, event);
+
+ return metadata->fd;
+}
+
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+static struct fanotify_response_event *dequeue_re(struct fsnotify_group *group,
+ __s32 fd)
+{
+ struct fanotify_response_event *re, *return_re = NULL;
+
+ mutex_lock(&group->fanotify_data.access_mutex);
+ list_for_each_entry(re, &group->fanotify_data.access_list, list) {
+ if (re->fd != fd)
+ continue;
+
+ list_del_init(&re->list);
+ return_re = re;
+ break;
+ }
+ mutex_unlock(&group->fanotify_data.access_mutex);
+
+ pr_debug("%s: found return_re=%p\n", __func__, return_re);
+
+ return return_re;
+}
+
+static int process_access_response(struct fsnotify_group *group,
+ struct fanotify_response *response_struct)
+{
+ struct fanotify_response_event *re;
+ __s32 fd = response_struct->fd;
+ __u32 response = response_struct->response;
+
+ pr_debug("%s: group=%p fd=%d response=%d\n", __func__, group,
+ fd, response);
+ /*
+ * make sure the response is valid, if invalid we do nothing and either
+ * userspace can send a valid responce or we will clean it up after the
+ * timeout
+ */
+ switch (response) {
+ case FAN_ALLOW:
+ case FAN_DENY:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (fd < 0)
+ return -EINVAL;
+
+ re = dequeue_re(group, fd);
+ if (!re)
+ return -ENOENT;
+
+ re->event->response = response;
+
+ wake_up(&group->fanotify_data.access_waitq);
+
+ kmem_cache_free(fanotify_response_event_cache, re);
+
+ return 0;
+}
+
+static int prepare_for_access_response(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ __s32 fd)
+{
+ struct fanotify_response_event *re;
+
+ if (!(event->mask & FAN_ALL_PERM_EVENTS))
+ return 0;
+
+ re = kmem_cache_alloc(fanotify_response_event_cache, GFP_KERNEL);
+ if (!re)
+ return -ENOMEM;
+
+ re->event = event;
+ re->fd = fd;
+
+ mutex_lock(&group->fanotify_data.access_mutex);
+ list_add_tail(&re->list, &group->fanotify_data.access_list);
+ mutex_unlock(&group->fanotify_data.access_mutex);
+
+ return 0;
+}
+
+static void remove_access_response(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ __s32 fd)
+{
+ struct fanotify_response_event *re;
+
+ if (!(event->mask & FAN_ALL_PERM_EVENTS))
+ return;
+
+ re = dequeue_re(group, fd);
+ if (!re)
+ return;
+
+ BUG_ON(re->event != event);
+
+ kmem_cache_free(fanotify_response_event_cache, re);
+
+ return;
+}
+#else
+static int prepare_for_access_response(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ __s32 fd)
+{
+ return 0;
+}
+
+static void remove_access_response(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ __s32 fd)
+{
+ return;
+}
+#endif
+
+static ssize_t copy_event_to_user(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ char __user *buf)
+{
+ struct fanotify_event_metadata fanotify_event_metadata;
+ int fd, ret;
+
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
+
+ fd = fill_event_metadata(group, &fanotify_event_metadata, event);
+ if (fd < 0)
+ return fd;
+
+ ret = prepare_for_access_response(group, event, fd);
+ if (ret)
+ goto out_close_fd;
+
+ ret = -EFAULT;
+ if (copy_to_user(buf, &fanotify_event_metadata, FAN_EVENT_METADATA_LEN))
+ goto out_kill_access_response;
+
+ return FAN_EVENT_METADATA_LEN;
+
+out_kill_access_response:
+ remove_access_response(group, event, fd);
+out_close_fd:
+ sys_close(fd);
+ return ret;
+}
+
+/* intofiy userspace file descriptor functions */
+static unsigned int fanotify_poll(struct file *file, poll_table *wait)
+{
+ struct fsnotify_group *group = file->private_data;
+ int ret = 0;
+
+ poll_wait(file, &group->notification_waitq, wait);
+ mutex_lock(&group->notification_mutex);
+ if (!fsnotify_notify_queue_is_empty(group))
+ ret = POLLIN | POLLRDNORM;
+ mutex_unlock(&group->notification_mutex);
+
+ return ret;
+}
+
+static ssize_t fanotify_read(struct file *file, char __user *buf,
+ size_t count, loff_t *pos)
+{
+ struct fsnotify_group *group;
+ struct fsnotify_event *kevent;
+ char __user *start;
+ int ret;
+ DEFINE_WAIT(wait);
+
+ start = buf;
+ group = file->private_data;
+
+ pr_debug("%s: group=%p\n", __func__, group);
+
+ while (1) {
+ prepare_to_wait(&group->notification_waitq, &wait, TASK_INTERRUPTIBLE);
+
+ mutex_lock(&group->notification_mutex);
+ kevent = get_one_event(group, count);
+ mutex_unlock(&group->notification_mutex);
+
+ if (kevent) {
+ ret = PTR_ERR(kevent);
+ if (IS_ERR(kevent))
+ break;
+ ret = copy_event_to_user(group, kevent, buf);
+ fsnotify_put_event(kevent);
+ if (ret < 0)
+ break;
+ buf += ret;
+ count -= ret;
+ continue;
+ }
+
+ ret = -EAGAIN;
+ if (file->f_flags & O_NONBLOCK)
+ break;
+ ret = -EINTR;
+ if (signal_pending(current))
+ break;
+
+ if (start != buf)
+ break;
+
+ schedule();
+ }
+
+ finish_wait(&group->notification_waitq, &wait);
+ if (start != buf && ret != -EFAULT)
+ ret = buf - start;
+ return ret;
+}
+
+static ssize_t fanotify_write(struct file *file, const char __user *buf, size_t count, loff_t *pos)
+{
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ struct fanotify_response response = { .fd = -1, .response = -1 };
+ struct fsnotify_group *group;
+ int ret;
+
+ group = file->private_data;
+
+ if (count > sizeof(response))
+ count = sizeof(response);
+
+ pr_debug("%s: group=%p count=%zu\n", __func__, group, count);
+
+ if (copy_from_user(&response, buf, count))
+ return -EFAULT;
+
+ ret = process_access_response(group, &response);
+ if (ret < 0)
+ count = ret;
+
+ return count;
+#else
+ return -EINVAL;
+#endif
+}
+
+static int fanotify_release(struct inode *ignored, struct file *file)
+{
+ struct fsnotify_group *group = file->private_data;
+
+ pr_debug("%s: file=%p group=%p\n", __func__, file, group);
+
+ /* matches the fanotify_init->fsnotify_alloc_group */
+ fsnotify_put_group(group);
+
+ return 0;
+}
+
+static long fanotify_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct fsnotify_group *group;
+ struct fsnotify_event_holder *holder;
+ void __user *p;
+ int ret = -ENOTTY;
+ size_t send_len = 0;
+
+ group = file->private_data;
+
+ p = (void __user *) arg;
+
+ switch (cmd) {
+ case FIONREAD:
+ mutex_lock(&group->notification_mutex);
+ list_for_each_entry(holder, &group->notification_list, event_list)
+ send_len += FAN_EVENT_METADATA_LEN;
+ mutex_unlock(&group->notification_mutex);
+ ret = put_user(send_len, (int __user *) p);
+ break;
+ }
+
+ return ret;
+}
+
+static const struct file_operations fanotify_fops = {
+ .poll = fanotify_poll,
+ .read = fanotify_read,
+ .write = fanotify_write,
+ .fasync = NULL,
+ .release = fanotify_release,
+ .unlocked_ioctl = fanotify_ioctl,
+ .compat_ioctl = fanotify_ioctl,
+};
+
+static void fanotify_free_mark(struct fsnotify_mark *fsn_mark)
+{
+ kmem_cache_free(fanotify_mark_cache, fsn_mark);
+}
+
+static int fanotify_find_path(int dfd, const char __user *filename,
+ struct path *path, unsigned int flags)
+{
+ int ret;
+
+ pr_debug("%s: dfd=%d filename=%p flags=%x\n", __func__,
+ dfd, filename, flags);
+
+ if (filename == NULL) {
+ struct file *file;
+ int fput_needed;
+
+ ret = -EBADF;
+ file = fget_light(dfd, &fput_needed);
+ if (!file)
+ goto out;
+
+ ret = -ENOTDIR;
+ if ((flags & FAN_MARK_ONLYDIR) &&
+ !(S_ISDIR(file->f_path.dentry->d_inode->i_mode))) {
+ fput_light(file, fput_needed);
+ goto out;
+ }
+
+ *path = file->f_path;
+ path_get(path);
+ fput_light(file, fput_needed);
+ } else {
+ unsigned int lookup_flags = 0;
+
+ if (!(flags & FAN_MARK_DONT_FOLLOW))
+ lookup_flags |= LOOKUP_FOLLOW;
+ if (flags & FAN_MARK_ONLYDIR)
+ lookup_flags |= LOOKUP_DIRECTORY;
+
+ ret = user_path_at(dfd, filename, lookup_flags, path);
+ if (ret)
+ goto out;
+ }
+
+ /* you can only watch an inode if you have read permissions on it */
+ ret = inode_permission(path->dentry->d_inode, MAY_READ);
+ if (ret)
+ path_put(path);
+out:
+ return ret;
+}
+
+static __u32 fanotify_mark_remove_from_mask(struct fsnotify_mark *fsn_mark,
+ __u32 mask,
+ unsigned int flags)
+{
+ __u32 oldmask;
+
+ spin_lock(&fsn_mark->lock);
+ if (!(flags & FAN_MARK_IGNORED_MASK)) {
+ oldmask = fsn_mark->mask;
+ fsnotify_set_mark_mask_locked(fsn_mark, (oldmask & ~mask));
+ } else {
+ oldmask = fsn_mark->ignored_mask;
+ fsnotify_set_mark_ignored_mask_locked(fsn_mark, (oldmask & ~mask));
+ }
+ spin_unlock(&fsn_mark->lock);
+
+ if (!(oldmask & ~mask))
+ fsnotify_destroy_mark(fsn_mark);
+
+ return mask & oldmask;
+}
+
+static int fanotify_remove_vfsmount_mark(struct fsnotify_group *group,
+ struct vfsmount *mnt, __u32 mask,
+ unsigned int flags)
+{
+ struct fsnotify_mark *fsn_mark = NULL;
+ __u32 removed;
+
+ fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
+ if (!fsn_mark)
+ return -ENOENT;
+
+ removed = fanotify_mark_remove_from_mask(fsn_mark, mask, flags);
+ fsnotify_put_mark(fsn_mark);
+ if (removed & mnt->mnt_fsnotify_mask)
+ fsnotify_recalc_vfsmount_mask(mnt);
+
+ return 0;
+}
+
+static int fanotify_remove_inode_mark(struct fsnotify_group *group,
+ struct inode *inode, __u32 mask,
+ unsigned int flags)
+{
+ struct fsnotify_mark *fsn_mark = NULL;
+ __u32 removed;
+
+ fsn_mark = fsnotify_find_inode_mark(group, inode);
+ if (!fsn_mark)
+ return -ENOENT;
+
+ removed = fanotify_mark_remove_from_mask(fsn_mark, mask, flags);
+ /* matches the fsnotify_find_inode_mark() */
+ fsnotify_put_mark(fsn_mark);
+ if (removed & inode->i_fsnotify_mask)
+ fsnotify_recalc_inode_mask(inode);
+
+ return 0;
+}
+
+static __u32 fanotify_mark_add_to_mask(struct fsnotify_mark *fsn_mark,
+ __u32 mask,
+ unsigned int flags)
+{
+ __u32 oldmask;
+
+ spin_lock(&fsn_mark->lock);
+ if (!(flags & FAN_MARK_IGNORED_MASK)) {
+ oldmask = fsn_mark->mask;
+ fsnotify_set_mark_mask_locked(fsn_mark, (oldmask | mask));
+ } else {
+ oldmask = fsn_mark->ignored_mask;
+ fsnotify_set_mark_ignored_mask_locked(fsn_mark, (oldmask | mask));
+ if (flags & FAN_MARK_IGNORED_SURV_MODIFY)
+ fsn_mark->flags |= FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY;
+ }
+ spin_unlock(&fsn_mark->lock);
+
+ return mask & ~oldmask;
+}
+
+static int fanotify_add_vfsmount_mark(struct fsnotify_group *group,
+ struct vfsmount *mnt, __u32 mask,
+ unsigned int flags)
+{
+ struct fsnotify_mark *fsn_mark;
+ __u32 added;
+
+ fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
+ if (!fsn_mark) {
+ int ret;
+
+ fsn_mark = kmem_cache_alloc(fanotify_mark_cache, GFP_KERNEL);
+ if (!fsn_mark)
+ return -ENOMEM;
+
+ fsnotify_init_mark(fsn_mark, fanotify_free_mark);
+ ret = fsnotify_add_mark(fsn_mark, group, NULL, mnt, 0);
+ if (ret) {
+ fanotify_free_mark(fsn_mark);
+ return ret;
+ }
+ }
+ added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
+ fsnotify_put_mark(fsn_mark);
+ if (added & ~mnt->mnt_fsnotify_mask)
+ fsnotify_recalc_vfsmount_mask(mnt);
+
+ return 0;
+}
+
+static int fanotify_add_inode_mark(struct fsnotify_group *group,
+ struct inode *inode, __u32 mask,
+ unsigned int flags)
+{
+ struct fsnotify_mark *fsn_mark;
+ __u32 added;
+
+ pr_debug("%s: group=%p inode=%p\n", __func__, group, inode);
+
+ fsn_mark = fsnotify_find_inode_mark(group, inode);
+ if (!fsn_mark) {
+ int ret;
+
+ fsn_mark = kmem_cache_alloc(fanotify_mark_cache, GFP_KERNEL);
+ if (!fsn_mark)
+ return -ENOMEM;
+
+ fsnotify_init_mark(fsn_mark, fanotify_free_mark);
+ ret = fsnotify_add_mark(fsn_mark, group, inode, NULL, 0);
+ if (ret) {
+ fanotify_free_mark(fsn_mark);
+ return ret;
+ }
+ }
+ added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
+ fsnotify_put_mark(fsn_mark);
+ if (added & ~inode->i_fsnotify_mask)
+ fsnotify_recalc_inode_mask(inode);
+ return 0;
+}
+
+/* fanotify syscalls */
+SYSCALL_DEFINE2(fanotify_init, unsigned int, flags, unsigned int, event_f_flags)
+{
+ struct fsnotify_group *group;
+ int f_flags, fd;
+
+ pr_debug("%s: flags=%d event_f_flags=%d\n",
+ __func__, flags, event_f_flags);
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (flags & ~FAN_ALL_INIT_FLAGS)
+ return -EINVAL;
+
+ f_flags = O_RDWR | FMODE_NONOTIFY;
+ if (flags & FAN_CLOEXEC)
+ f_flags |= O_CLOEXEC;
+ if (flags & FAN_NONBLOCK)
+ f_flags |= O_NONBLOCK;
+
+ /* fsnotify_alloc_group takes a ref. Dropped in fanotify_release */
+ group = fsnotify_alloc_group(&fanotify_fsnotify_ops);
+ if (IS_ERR(group))
+ return PTR_ERR(group);
+
+ group->fanotify_data.f_flags = event_f_flags;
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ mutex_init(&group->fanotify_data.access_mutex);
+ init_waitqueue_head(&group->fanotify_data.access_waitq);
+ INIT_LIST_HEAD(&group->fanotify_data.access_list);
+#endif
+
+ fd = anon_inode_getfd("[fanotify]", &fanotify_fops, group, f_flags);
+ if (fd < 0)
+ goto out_put_group;
+
+ return fd;
+
+out_put_group:
+ fsnotify_put_group(group);
+ return fd;
+}
+
+SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
+ __u64 mask, int dfd,
+ const char __user * pathname)
+{
+ struct inode *inode = NULL;
+ struct vfsmount *mnt = NULL;
+ struct fsnotify_group *group;
+ struct file *filp;
+ struct path path;
+ int ret, fput_needed;
+
+ pr_debug("%s: fanotify_fd=%d flags=%x dfd=%d pathname=%p mask=%llx\n",
+ __func__, fanotify_fd, flags, dfd, pathname, mask);
+
+ /* we only use the lower 32 bits as of right now. */
+ if (mask & ((__u64)0xffffffff << 32))
+ return -EINVAL;
+
+ if (flags & ~FAN_ALL_MARK_FLAGS)
+ return -EINVAL;
+ switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE | FAN_MARK_FLUSH)) {
+ case FAN_MARK_ADD:
+ case FAN_MARK_REMOVE:
+ case FAN_MARK_FLUSH:
+ break;
+ default:
+ return -EINVAL;
+ }
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ if (mask & ~(FAN_ALL_EVENTS | FAN_ALL_PERM_EVENTS | FAN_EVENT_ON_CHILD))
+#else
+ if (mask & ~(FAN_ALL_EVENTS | FAN_EVENT_ON_CHILD))
+#endif
+ return -EINVAL;
+
+ filp = fget_light(fanotify_fd, &fput_needed);
+ if (unlikely(!filp))
+ return -EBADF;
+
+ /* verify that this is indeed an fanotify instance */
+ ret = -EINVAL;
+ if (unlikely(filp->f_op != &fanotify_fops))
+ goto fput_and_out;
+
+ ret = fanotify_find_path(dfd, pathname, &path, flags);
+ if (ret)
+ goto fput_and_out;
+
+ /* inode held in place by reference to path; group by fget on fd */
+ if (!(flags & FAN_MARK_MOUNT))
+ inode = path.dentry->d_inode;
+ else
+ mnt = path.mnt;
+ group = filp->private_data;
+
+ /* create/update an inode mark */
+ switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE | FAN_MARK_FLUSH)) {
+ case FAN_MARK_ADD:
+ if (flags & FAN_MARK_MOUNT)
+ ret = fanotify_add_vfsmount_mark(group, mnt, mask, flags);
+ else
+ ret = fanotify_add_inode_mark(group, inode, mask, flags);
+ break;
+ case FAN_MARK_REMOVE:
+ if (flags & FAN_MARK_MOUNT)
+ ret = fanotify_remove_vfsmount_mark(group, mnt, mask, flags);
+ else
+ ret = fanotify_remove_inode_mark(group, inode, mask, flags);
+ break;
+ case FAN_MARK_FLUSH:
+ if (flags & FAN_MARK_MOUNT)
+ fsnotify_clear_vfsmount_marks_by_group(group);
+ else
+ fsnotify_clear_inode_marks_by_group(group);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ path_put(&path);
+fput_and_out:
+ fput_light(filp, fput_needed);
+ return ret;
+}
+
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_fanotify_mark(long fanotify_fd, long flags, __u64 mask,
+ long dfd, long pathname)
+{
+ return SYSC_fanotify_mark((int) fanotify_fd, (unsigned int) flags,
+ mask, (int) dfd,
+ (const char __user *) pathname);
+}
+SYSCALL_ALIAS(sys_fanotify_mark, SyS_fanotify_mark);
+#endif
+
+/*
+ * fanotify_user_setup - Our initialization function. Note that we cannnot return
+ * error because we have compiled-in VFS hooks. So an (unlikely) failure here
+ * must result in panic().
+ */
+static int __init fanotify_user_setup(void)
+{
+ fanotify_mark_cache = KMEM_CACHE(fsnotify_mark, SLAB_PANIC);
+ fanotify_response_event_cache = KMEM_CACHE(fanotify_response_event,
+ SLAB_PANIC);
+
+ return 0;
+}
+device_initcall(fanotify_user_setup);
#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/mount.h>
#include <linux/srcu.h>
#include <linux/fsnotify_backend.h>
}
EXPORT_SYMBOL_GPL(__fsnotify_inode_delete);
+void __fsnotify_vfsmount_delete(struct vfsmount *mnt)
+{
+ fsnotify_clear_marks_by_mount(mnt);
+}
+
/*
* Given an inode, first check if we care what happens to our children. Inotify
* and dnotify both tell their parents about events. If we care about any event
}
/* Notify this dentry's parent about a child's events. */
-void __fsnotify_parent(struct dentry *dentry, __u32 mask)
+void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
{
struct dentry *parent;
struct inode *p_inode;
bool send = false;
bool should_update_children = false;
+ if (!dentry)
+ dentry = path->dentry;
+
if (!(dentry->d_flags & DCACHE_FSNOTIFY_PARENT_WATCHED))
return;
* specifies these are events which came from a child. */
mask |= FS_EVENT_ON_CHILD;
- fsnotify(p_inode, mask, dentry->d_inode, FSNOTIFY_EVENT_INODE,
- dentry->d_name.name, 0);
+ if (path)
+ fsnotify(p_inode, mask, path, FSNOTIFY_EVENT_PATH,
+ dentry->d_name.name, 0);
+ else
+ fsnotify(p_inode, mask, dentry->d_inode, FSNOTIFY_EVENT_INODE,
+ dentry->d_name.name, 0);
dput(parent);
}
}
EXPORT_SYMBOL_GPL(__fsnotify_parent);
+static int send_to_group(struct inode *to_tell, struct vfsmount *mnt,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
+ __u32 mask, void *data,
+ int data_is, u32 cookie,
+ const unsigned char *file_name,
+ struct fsnotify_event **event)
+{
+ struct fsnotify_group *group = inode_mark->group;
+ __u32 inode_test_mask = (mask & ~FS_EVENT_ON_CHILD);
+ __u32 vfsmount_test_mask = (mask & ~FS_EVENT_ON_CHILD);
+
+ pr_debug("%s: group=%p to_tell=%p mnt=%p mark=%p mask=%x data=%p"
+ " data_is=%d cookie=%d event=%p\n", __func__, group, to_tell,
+ mnt, inode_mark, mask, data, data_is, cookie, *event);
+
+ /* clear ignored on inode modification */
+ if (mask & FS_MODIFY) {
+ if (inode_mark &&
+ !(inode_mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
+ inode_mark->ignored_mask = 0;
+ if (vfsmount_mark &&
+ !(vfsmount_mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
+ vfsmount_mark->ignored_mask = 0;
+ }
+
+ /* does the inode mark tell us to do something? */
+ if (inode_mark) {
+ inode_test_mask &= inode_mark->mask;
+ inode_test_mask &= ~inode_mark->ignored_mask;
+ }
+
+ /* does the vfsmount_mark tell us to do something? */
+ if (vfsmount_mark) {
+ vfsmount_test_mask &= vfsmount_mark->mask;
+ vfsmount_test_mask &= ~vfsmount_mark->ignored_mask;
+ if (inode_mark)
+ vfsmount_test_mask &= ~inode_mark->ignored_mask;
+ }
+
+ if (!inode_test_mask && !vfsmount_test_mask)
+ return 0;
+
+ if (group->ops->should_send_event(group, to_tell, inode_mark,
+ vfsmount_mark, mask, data,
+ data_is) == false)
+ return 0;
+
+ if (!*event) {
+ *event = fsnotify_create_event(to_tell, mask, data,
+ data_is, file_name,
+ cookie, GFP_KERNEL);
+ if (!*event)
+ return -ENOMEM;
+ }
+ return group->ops->handle_event(group, inode_mark, vfsmount_mark, *event);
+}
+
/*
* This is the main call to fsnotify. The VFS calls into hook specific functions
* in linux/fsnotify.h. Those functions then in turn call here. Here will call
* out to all of the registered fsnotify_group. Those groups can then use the
* notification event in whatever means they feel necessary.
*/
-void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const char *file_name, u32 cookie)
+int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+ const unsigned char *file_name, u32 cookie)
{
- struct fsnotify_group *group;
+ struct hlist_node *inode_node, *vfsmount_node;
+ struct fsnotify_mark *inode_mark = NULL, *vfsmount_mark = NULL;
+ struct fsnotify_group *inode_group, *vfsmount_group;
struct fsnotify_event *event = NULL;
- int idx;
+ struct vfsmount *mnt;
+ int idx, ret = 0;
+ bool used_inode = false, used_vfsmount = false;
/* global tests shouldn't care about events on child only the specific event */
__u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
- if (list_empty(&fsnotify_groups))
- return;
+ if (data_is == FSNOTIFY_EVENT_PATH)
+ mnt = ((struct path *)data)->mnt;
+ else
+ mnt = NULL;
- if (!(test_mask & fsnotify_mask))
- return;
-
- if (!(test_mask & to_tell->i_fsnotify_mask))
- return;
/*
- * SRCU!! the groups list is very very much read only and the path is
- * very hot. The VAST majority of events are not going to need to do
- * anything other than walk the list so it's crazy to pre-allocate.
+ * if this is a modify event we may need to clear the ignored masks
+ * otherwise return if neither the inode nor the vfsmount care about
+ * this type of event.
*/
- idx = srcu_read_lock(&fsnotify_grp_srcu);
- list_for_each_entry_rcu(group, &fsnotify_groups, group_list) {
- if (test_mask & group->mask) {
- if (!group->ops->should_send_event(group, to_tell, mask))
- continue;
- if (!event) {
- event = fsnotify_create_event(to_tell, mask, data,
- data_is, file_name, cookie,
- GFP_KERNEL);
- /* shit, we OOM'd and now we can't tell, maybe
- * someday someone else will want to do something
- * here */
- if (!event)
- break;
- }
- group->ops->handle_event(group, event);
+ if (!(mask & FS_MODIFY) &&
+ !(test_mask & to_tell->i_fsnotify_mask) &&
+ !(mnt && test_mask & mnt->mnt_fsnotify_mask))
+ return 0;
+
+ idx = srcu_read_lock(&fsnotify_mark_srcu);
+
+ if ((mask & FS_MODIFY) ||
+ (test_mask & to_tell->i_fsnotify_mask))
+ inode_node = srcu_dereference(to_tell->i_fsnotify_marks.first,
+ &fsnotify_mark_srcu);
+ else
+ inode_node = NULL;
+
+ if (mnt) {
+ if ((mask & FS_MODIFY) ||
+ (test_mask & mnt->mnt_fsnotify_mask))
+ vfsmount_node = srcu_dereference(mnt->mnt_fsnotify_marks.first,
+ &fsnotify_mark_srcu);
+ else
+ vfsmount_node = NULL;
+ } else {
+ mnt = NULL;
+ vfsmount_node = NULL;
+ }
+
+ while (inode_node || vfsmount_node) {
+ if (inode_node) {
+ inode_mark = hlist_entry(srcu_dereference(inode_node, &fsnotify_mark_srcu),
+ struct fsnotify_mark, i.i_list);
+ inode_group = inode_mark->group;
+ } else
+ inode_group = (void *)-1;
+
+ if (vfsmount_node) {
+ vfsmount_mark = hlist_entry(srcu_dereference(vfsmount_node, &fsnotify_mark_srcu),
+ struct fsnotify_mark, m.m_list);
+ vfsmount_group = vfsmount_mark->group;
+ } else
+ vfsmount_group = (void *)-1;
+
+ if (inode_group < vfsmount_group) {
+ /* handle inode */
+ send_to_group(to_tell, NULL, inode_mark, NULL, mask, data,
+ data_is, cookie, file_name, &event);
+ used_inode = true;
+ } else if (vfsmount_group < inode_group) {
+ send_to_group(to_tell, mnt, NULL, vfsmount_mark, mask, data,
+ data_is, cookie, file_name, &event);
+ used_vfsmount = true;
+ } else {
+ send_to_group(to_tell, mnt, inode_mark, vfsmount_mark,
+ mask, data, data_is, cookie, file_name,
+ &event);
+ used_vfsmount = true;
+ used_inode = true;
}
+
+ if (used_inode)
+ inode_node = srcu_dereference(inode_node->next,
+ &fsnotify_mark_srcu);
+ if (used_vfsmount)
+ vfsmount_node = srcu_dereference(vfsmount_node->next,
+ &fsnotify_mark_srcu);
}
- srcu_read_unlock(&fsnotify_grp_srcu, idx);
+
+ srcu_read_unlock(&fsnotify_mark_srcu, idx);
/*
* fsnotify_create_event() took a reference so the event can't be cleaned
* up while we are still trying to add it to lists, drop that one.
*/
if (event)
fsnotify_put_event(event);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(fsnotify);
static __init int fsnotify_init(void)
{
- return init_srcu_struct(&fsnotify_grp_srcu);
+ int ret;
+
+ BUG_ON(hweight32(ALL_FSNOTIFY_EVENTS) != 23);
+
+ ret = init_srcu_struct(&fsnotify_mark_srcu);
+ if (ret)
+ panic("initializing fsnotify_mark_srcu");
+
+ return 0;
}
-subsys_initcall(fsnotify_init);
+core_initcall(fsnotify_init);
#include <linux/srcu.h>
#include <linux/types.h>
-/* protects reads of fsnotify_groups */
-extern struct srcu_struct fsnotify_grp_srcu;
-/* all groups which receive fsnotify events */
-extern struct list_head fsnotify_groups;
-/* all bitwise OR of all event types (FS_*) for all fsnotify_groups */
-extern __u32 fsnotify_mask;
-
/* destroy all events sitting in this groups notification queue */
extern void fsnotify_flush_notify(struct fsnotify_group *group);
+/* protects reads of inode and vfsmount marks list */
+extern struct srcu_struct fsnotify_mark_srcu;
+
+extern void fsnotify_set_inode_mark_mask_locked(struct fsnotify_mark *fsn_mark,
+ __u32 mask);
+/* add a mark to an inode */
+extern int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
+ struct fsnotify_group *group, struct inode *inode,
+ int allow_dups);
+/* add a mark to a vfsmount */
+extern int fsnotify_add_vfsmount_mark(struct fsnotify_mark *mark,
+ struct fsnotify_group *group, struct vfsmount *mnt,
+ int allow_dups);
+
/* final kfree of a group */
extern void fsnotify_final_destroy_group(struct fsnotify_group *group);
+/* vfsmount specific destruction of a mark */
+extern void fsnotify_destroy_vfsmount_mark(struct fsnotify_mark *mark);
+/* inode specific destruction of a mark */
+extern void fsnotify_destroy_inode_mark(struct fsnotify_mark *mark);
/* run the list of all marks associated with inode and flag them to be freed */
extern void fsnotify_clear_marks_by_inode(struct inode *inode);
+/* run the list of all marks associated with vfsmount and flag them to be freed */
+extern void fsnotify_clear_marks_by_mount(struct vfsmount *mnt);
/*
* update the dentry->d_flags of all of inode's children to indicate if inode cares
* about events that happen to its children.
#include <asm/atomic.h>
-/* protects writes to fsnotify_groups and fsnotify_mask */
-static DEFINE_MUTEX(fsnotify_grp_mutex);
-/* protects reads while running the fsnotify_groups list */
-struct srcu_struct fsnotify_grp_srcu;
-/* all groups registered to receive filesystem notifications */
-LIST_HEAD(fsnotify_groups);
-/* bitwise OR of all events (FS_*) interesting to some group on this system */
-__u32 fsnotify_mask;
-
-/*
- * When a new group registers or changes it's set of interesting events
- * this function updates the fsnotify_mask to contain all interesting events
- */
-void fsnotify_recalc_global_mask(void)
-{
- struct fsnotify_group *group;
- __u32 mask = 0;
- int idx;
-
- idx = srcu_read_lock(&fsnotify_grp_srcu);
- list_for_each_entry_rcu(group, &fsnotify_groups, group_list)
- mask |= group->mask;
- srcu_read_unlock(&fsnotify_grp_srcu, idx);
- fsnotify_mask = mask;
-}
-
-/*
- * Update the group->mask by running all of the marks associated with this
- * group and finding the bitwise | of all of the mark->mask. If we change
- * the group->mask we need to update the global mask of events interesting
- * to the system.
- */
-void fsnotify_recalc_group_mask(struct fsnotify_group *group)
-{
- __u32 mask = 0;
- __u32 old_mask = group->mask;
- struct fsnotify_mark_entry *entry;
-
- spin_lock(&group->mark_lock);
- list_for_each_entry(entry, &group->mark_entries, g_list)
- mask |= entry->mask;
- spin_unlock(&group->mark_lock);
-
- group->mask = mask;
-
- if (old_mask != mask)
- fsnotify_recalc_global_mask();
-}
-
-/*
- * Take a reference to a group so things found under the fsnotify_grp_mutex
- * can't get freed under us
- */
-static void fsnotify_get_group(struct fsnotify_group *group)
-{
- atomic_inc(&group->refcnt);
-}
-
/*
* Final freeing of a group
*/
*/
static void fsnotify_destroy_group(struct fsnotify_group *group)
{
- /* clear all inode mark entries for this group */
+ /* clear all inode marks for this group */
fsnotify_clear_marks_by_group(group);
+ synchronize_srcu(&fsnotify_mark_srcu);
+
/* past the point of no return, matches the initial value of 1 */
if (atomic_dec_and_test(&group->num_marks))
fsnotify_final_destroy_group(group);
}
-/*
- * Remove this group from the global list of groups that will get events
- * this can be done even if there are still references and things still using
- * this group. This just stops the group from getting new events.
- */
-static void __fsnotify_evict_group(struct fsnotify_group *group)
-{
- BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
-
- if (group->on_group_list)
- list_del_rcu(&group->group_list);
- group->on_group_list = 0;
-}
-
-/*
- * Called when a group is no longer interested in getting events. This can be
- * used if a group is misbehaving or if for some reason a group should no longer
- * get any filesystem events.
- */
-void fsnotify_evict_group(struct fsnotify_group *group)
-{
- mutex_lock(&fsnotify_grp_mutex);
- __fsnotify_evict_group(group);
- mutex_unlock(&fsnotify_grp_mutex);
-}
-
/*
* Drop a reference to a group. Free it if it's through.
*/
void fsnotify_put_group(struct fsnotify_group *group)
{
- if (!atomic_dec_and_mutex_lock(&group->refcnt, &fsnotify_grp_mutex))
- return;
-
- /*
- * OK, now we know that there's no other users *and* we hold mutex,
- * so no new references will appear
- */
- __fsnotify_evict_group(group);
-
- /*
- * now it's off the list, so the only thing we might care about is
- * srcu access....
- */
- mutex_unlock(&fsnotify_grp_mutex);
- synchronize_srcu(&fsnotify_grp_srcu);
-
- /* and now it is really dead. _Nothing_ could be seeing it */
- fsnotify_recalc_global_mask();
- fsnotify_destroy_group(group);
-}
-
-/*
- * Simply run the fsnotify_groups list and find a group which matches
- * the given parameters. If a group is found we take a reference to that
- * group.
- */
-static struct fsnotify_group *fsnotify_find_group(unsigned int group_num, __u32 mask,
- const struct fsnotify_ops *ops)
-{
- struct fsnotify_group *group_iter;
- struct fsnotify_group *group = NULL;
-
- BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
-
- list_for_each_entry_rcu(group_iter, &fsnotify_groups, group_list) {
- if (group_iter->group_num == group_num) {
- if ((group_iter->mask == mask) &&
- (group_iter->ops == ops)) {
- fsnotify_get_group(group_iter);
- group = group_iter;
- } else
- group = ERR_PTR(-EEXIST);
- }
- }
- return group;
+ if (atomic_dec_and_test(&group->refcnt))
+ fsnotify_destroy_group(group);
}
/*
- * Either finds an existing group which matches the group_num, mask, and ops or
- * creates a new group and adds it to the global group list. In either case we
- * take a reference for the group returned.
+ * Create a new fsnotify_group and hold a reference for the group returned.
*/
-struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num, __u32 mask,
- const struct fsnotify_ops *ops)
+struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops)
{
- struct fsnotify_group *group, *tgroup;
+ struct fsnotify_group *group;
- /* very low use, simpler locking if we just always alloc */
- group = kmalloc(sizeof(struct fsnotify_group), GFP_KERNEL);
+ group = kzalloc(sizeof(struct fsnotify_group), GFP_KERNEL);
if (!group)
return ERR_PTR(-ENOMEM);
+ /* set to 0 when there a no external references to this group */
atomic_set(&group->refcnt, 1);
-
- group->on_group_list = 0;
- group->group_num = group_num;
- group->mask = mask;
+ /*
+ * hits 0 when there are no external references AND no marks for
+ * this group
+ */
+ atomic_set(&group->num_marks, 1);
mutex_init(&group->notification_mutex);
INIT_LIST_HEAD(&group->notification_list);
init_waitqueue_head(&group->notification_waitq);
- group->q_len = 0;
group->max_events = UINT_MAX;
spin_lock_init(&group->mark_lock);
- atomic_set(&group->num_marks, 0);
- INIT_LIST_HEAD(&group->mark_entries);
+ INIT_LIST_HEAD(&group->marks_list);
group->ops = ops;
- mutex_lock(&fsnotify_grp_mutex);
- tgroup = fsnotify_find_group(group_num, mask, ops);
- if (tgroup) {
- /* group already exists */
- mutex_unlock(&fsnotify_grp_mutex);
- /* destroy the new one we made */
- fsnotify_put_group(group);
- return tgroup;
- }
-
- /* group not found, add a new one */
- list_add_rcu(&group->group_list, &fsnotify_groups);
- group->on_group_list = 1;
- /* being on the fsnotify_groups list holds one num_marks */
- atomic_inc(&group->num_marks);
-
- mutex_unlock(&fsnotify_grp_mutex);
-
- if (mask)
- fsnotify_recalc_global_mask();
-
return group;
}
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/*
- * fsnotify inode mark locking/lifetime/and refcnting
- *
- * REFCNT:
- * The mark->refcnt tells how many "things" in the kernel currently are
- * referencing this object. The object typically will live inside the kernel
- * with a refcnt of 2, one for each list it is on (i_list, g_list). Any task
- * which can find this object holding the appropriete locks, can take a reference
- * and the object itself is guarenteed to survive until the reference is dropped.
- *
- * LOCKING:
- * There are 3 spinlocks involved with fsnotify inode marks and they MUST
- * be taken in order as follows:
- *
- * entry->lock
- * group->mark_lock
- * inode->i_lock
- *
- * entry->lock protects 2 things, entry->group and entry->inode. You must hold
- * that lock to dereference either of these things (they could be NULL even with
- * the lock)
- *
- * group->mark_lock protects the mark_entries list anchored inside a given group
- * and each entry is hooked via the g_list. It also sorta protects the
- * free_g_list, which when used is anchored by a private list on the stack of the
- * task which held the group->mark_lock.
- *
- * inode->i_lock protects the i_fsnotify_mark_entries list anchored inside a
- * given inode and each entry is hooked via the i_list. (and sorta the
- * free_i_list)
- *
- *
- * LIFETIME:
- * Inode marks survive between when they are added to an inode and when their
- * refcnt==0.
- *
- * The inode mark can be cleared for a number of different reasons including:
- * - The inode is unlinked for the last time. (fsnotify_inode_remove)
- * - The inode is being evicted from cache. (fsnotify_inode_delete)
- * - The fs the inode is on is unmounted. (fsnotify_inode_delete/fsnotify_unmount_inodes)
- * - Something explicitly requests that it be removed. (fsnotify_destroy_mark_by_entry)
- * - The fsnotify_group associated with the mark is going away and all such marks
- * need to be cleaned up. (fsnotify_clear_marks_by_group)
- *
- * Worst case we are given an inode and need to clean up all the marks on that
- * inode. We take i_lock and walk the i_fsnotify_mark_entries safely. For each
- * mark on the list we take a reference (so the mark can't disappear under us).
- * We remove that mark form the inode's list of marks and we add this mark to a
- * private list anchored on the stack using i_free_list; At this point we no
- * longer fear anything finding the mark using the inode's list of marks.
- *
- * We can safely and locklessly run the private list on the stack of everything
- * we just unattached from the original inode. For each mark on the private list
- * we grab the mark-> and can thus dereference mark->group and mark->inode. If
- * we see the group and inode are not NULL we take those locks. Now holding all
- * 3 locks we can completely remove the mark from other tasks finding it in the
- * future. Remember, 10 things might already be referencing this mark, but they
- * better be holding a ref. We drop our reference we took before we unhooked it
- * from the inode. When the ref hits 0 we can free the mark.
- *
- * Very similarly for freeing by group, except we use free_g_list.
- *
- * This has the very interesting property of being able to run concurrently with
- * any (or all) other directions.
- */
-
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/fsnotify_backend.h>
#include "fsnotify.h"
-void fsnotify_get_mark(struct fsnotify_mark_entry *entry)
-{
- atomic_inc(&entry->refcnt);
-}
-
-void fsnotify_put_mark(struct fsnotify_mark_entry *entry)
-{
- if (atomic_dec_and_test(&entry->refcnt))
- entry->free_mark(entry);
-}
-
/*
* Recalculate the mask of events relevant to a given inode locked.
*/
static void fsnotify_recalc_inode_mask_locked(struct inode *inode)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *mark;
struct hlist_node *pos;
__u32 new_mask = 0;
assert_spin_locked(&inode->i_lock);
- hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i_list)
- new_mask |= entry->mask;
+ hlist_for_each_entry(mark, pos, &inode->i_fsnotify_marks, i.i_list)
+ new_mask |= mark->mask;
inode->i_fsnotify_mask = new_mask;
}
__fsnotify_update_child_dentry_flags(inode);
}
-/*
- * Any time a mark is getting freed we end up here.
- * The caller had better be holding a reference to this mark so we don't actually
- * do the final put under the entry->lock
- */
-void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry)
+void fsnotify_destroy_inode_mark(struct fsnotify_mark *mark)
{
- struct fsnotify_group *group;
- struct inode *inode;
+ struct inode *inode = mark->i.inode;
- spin_lock(&entry->lock);
+ assert_spin_locked(&mark->lock);
+ assert_spin_locked(&mark->group->mark_lock);
- group = entry->group;
- inode = entry->inode;
-
- BUG_ON(group && !inode);
- BUG_ON(!group && inode);
-
- /* if !group something else already marked this to die */
- if (!group) {
- spin_unlock(&entry->lock);
- return;
- }
-
- /* 1 from caller and 1 for being on i_list/g_list */
- BUG_ON(atomic_read(&entry->refcnt) < 2);
-
- spin_lock(&group->mark_lock);
spin_lock(&inode->i_lock);
- hlist_del_init(&entry->i_list);
- entry->inode = NULL;
-
- list_del_init(&entry->g_list);
- entry->group = NULL;
-
- fsnotify_put_mark(entry); /* for i_list and g_list */
+ hlist_del_init_rcu(&mark->i.i_list);
+ mark->i.inode = NULL;
/*
- * this mark is now off the inode->i_fsnotify_mark_entries list and we
+ * this mark is now off the inode->i_fsnotify_marks list and we
* hold the inode->i_lock, so this is the perfect time to update the
* inode->i_fsnotify_mask
*/
fsnotify_recalc_inode_mask_locked(inode);
spin_unlock(&inode->i_lock);
- spin_unlock(&group->mark_lock);
- spin_unlock(&entry->lock);
-
- /*
- * Some groups like to know that marks are being freed. This is a
- * callback to the group function to let it know that this entry
- * is being freed.
- */
- if (group->ops->freeing_mark)
- group->ops->freeing_mark(entry, group);
-
- /*
- * __fsnotify_update_child_dentry_flags(inode);
- *
- * I really want to call that, but we can't, we have no idea if the inode
- * still exists the second we drop the entry->lock.
- *
- * The next time an event arrive to this inode from one of it's children
- * __fsnotify_parent will see that the inode doesn't care about it's
- * children and will update all of these flags then. So really this
- * is just a lazy update (and could be a perf win...)
- */
-
-
- iput(inode);
-
- /*
- * it's possible that this group tried to destroy itself, but this
- * this mark was simultaneously being freed by inode. If that's the
- * case, we finish freeing the group here.
- */
- if (unlikely(atomic_dec_and_test(&group->num_marks)))
- fsnotify_final_destroy_group(group);
-}
-
-/*
- * Given a group, destroy all of the marks associated with that group.
- */
-void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
-{
- struct fsnotify_mark_entry *lentry, *entry;
- LIST_HEAD(free_list);
-
- spin_lock(&group->mark_lock);
- list_for_each_entry_safe(entry, lentry, &group->mark_entries, g_list) {
- list_add(&entry->free_g_list, &free_list);
- list_del_init(&entry->g_list);
- fsnotify_get_mark(entry);
- }
- spin_unlock(&group->mark_lock);
-
- list_for_each_entry_safe(entry, lentry, &free_list, free_g_list) {
- fsnotify_destroy_mark_by_entry(entry);
- fsnotify_put_mark(entry);
- }
}
/*
*/
void fsnotify_clear_marks_by_inode(struct inode *inode)
{
- struct fsnotify_mark_entry *entry, *lentry;
+ struct fsnotify_mark *mark, *lmark;
struct hlist_node *pos, *n;
LIST_HEAD(free_list);
spin_lock(&inode->i_lock);
- hlist_for_each_entry_safe(entry, pos, n, &inode->i_fsnotify_mark_entries, i_list) {
- list_add(&entry->free_i_list, &free_list);
- hlist_del_init(&entry->i_list);
- fsnotify_get_mark(entry);
+ hlist_for_each_entry_safe(mark, pos, n, &inode->i_fsnotify_marks, i.i_list) {
+ list_add(&mark->i.free_i_list, &free_list);
+ hlist_del_init_rcu(&mark->i.i_list);
+ fsnotify_get_mark(mark);
}
spin_unlock(&inode->i_lock);
- list_for_each_entry_safe(entry, lentry, &free_list, free_i_list) {
- fsnotify_destroy_mark_by_entry(entry);
- fsnotify_put_mark(entry);
+ list_for_each_entry_safe(mark, lmark, &free_list, i.free_i_list) {
+ fsnotify_destroy_mark(mark);
+ fsnotify_put_mark(mark);
}
}
+/*
+ * Given a group clear all of the inode marks associated with that group.
+ */
+void fsnotify_clear_inode_marks_by_group(struct fsnotify_group *group)
+{
+ fsnotify_clear_marks_by_group_flags(group, FSNOTIFY_MARK_FLAG_INODE);
+}
+
/*
* given a group and inode, find the mark associated with that combination.
* if found take a reference to that mark and return it, else return NULL
*/
-struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *group,
- struct inode *inode)
+struct fsnotify_mark *fsnotify_find_inode_mark_locked(struct fsnotify_group *group,
+ struct inode *inode)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *mark;
struct hlist_node *pos;
assert_spin_locked(&inode->i_lock);
- hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i_list) {
- if (entry->group == group) {
- fsnotify_get_mark(entry);
- return entry;
+ hlist_for_each_entry(mark, pos, &inode->i_fsnotify_marks, i.i_list) {
+ if (mark->group == group) {
+ fsnotify_get_mark(mark);
+ return mark;
}
}
return NULL;
}
/*
- * Nothing fancy, just initialize lists and locks and counters.
+ * given a group and inode, find the mark associated with that combination.
+ * if found take a reference to that mark and return it, else return NULL
*/
-void fsnotify_init_mark(struct fsnotify_mark_entry *entry,
- void (*free_mark)(struct fsnotify_mark_entry *entry))
+struct fsnotify_mark *fsnotify_find_inode_mark(struct fsnotify_group *group,
+ struct inode *inode)
+{
+ struct fsnotify_mark *mark;
+
+ spin_lock(&inode->i_lock);
+ mark = fsnotify_find_inode_mark_locked(group, inode);
+ spin_unlock(&inode->i_lock);
+ return mark;
+}
+
+/*
+ * If we are setting a mark mask on an inode mark we should pin the inode
+ * in memory.
+ */
+void fsnotify_set_inode_mark_mask_locked(struct fsnotify_mark *mark,
+ __u32 mask)
{
- spin_lock_init(&entry->lock);
- atomic_set(&entry->refcnt, 1);
- INIT_HLIST_NODE(&entry->i_list);
- entry->group = NULL;
- entry->mask = 0;
- entry->inode = NULL;
- entry->free_mark = free_mark;
+ struct inode *inode;
+
+ assert_spin_locked(&mark->lock);
+
+ if (mask &&
+ mark->i.inode &&
+ !(mark->flags & FSNOTIFY_MARK_FLAG_OBJECT_PINNED)) {
+ mark->flags |= FSNOTIFY_MARK_FLAG_OBJECT_PINNED;
+ inode = igrab(mark->i.inode);
+ /*
+ * we shouldn't be able to get here if the inode wasn't
+ * already safely held in memory. But bug in case it
+ * ever is wrong.
+ */
+ BUG_ON(!inode);
+ }
}
/*
- * Attach an initialized mark entry to a given group and inode.
+ * Attach an initialized mark to a given inode.
* These marks may be used for the fsnotify backend to determine which
- * event types should be delivered to which group and for which inodes.
+ * event types should be delivered to which group and for which inodes. These
+ * marks are ordered according to the group's location in memory.
*/
-int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
- struct fsnotify_group *group, struct inode *inode)
+int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
+ struct fsnotify_group *group, struct inode *inode,
+ int allow_dups)
{
- struct fsnotify_mark_entry *lentry;
+ struct fsnotify_mark *lmark;
+ struct hlist_node *node, *last = NULL;
int ret = 0;
- inode = igrab(inode);
- if (unlikely(!inode))
- return -EINVAL;
+ mark->flags |= FSNOTIFY_MARK_FLAG_INODE;
+
+ assert_spin_locked(&mark->lock);
+ assert_spin_locked(&group->mark_lock);
- /*
- * LOCKING ORDER!!!!
- * entry->lock
- * group->mark_lock
- * inode->i_lock
- */
- spin_lock(&entry->lock);
- spin_lock(&group->mark_lock);
spin_lock(&inode->i_lock);
- lentry = fsnotify_find_mark_entry(group, inode);
- if (!lentry) {
- entry->group = group;
- entry->inode = inode;
+ mark->i.inode = inode;
- hlist_add_head(&entry->i_list, &inode->i_fsnotify_mark_entries);
- list_add(&entry->g_list, &group->mark_entries);
+ /* is mark the first mark? */
+ if (hlist_empty(&inode->i_fsnotify_marks)) {
+ hlist_add_head_rcu(&mark->i.i_list, &inode->i_fsnotify_marks);
+ goto out;
+ }
- fsnotify_get_mark(entry); /* for i_list and g_list */
+ /* should mark be in the middle of the current list? */
+ hlist_for_each_entry(lmark, node, &inode->i_fsnotify_marks, i.i_list) {
+ last = node;
+
+ if ((lmark->group == group) && !allow_dups) {
+ ret = -EEXIST;
+ goto out;
+ }
- atomic_inc(&group->num_marks);
+ if (mark->group < lmark->group)
+ continue;
- fsnotify_recalc_inode_mask_locked(inode);
+ hlist_add_before_rcu(&mark->i.i_list, &lmark->i.i_list);
+ goto out;
}
+ BUG_ON(last == NULL);
+ /* mark should be the last entry. last is the current last entry */
+ hlist_add_after_rcu(last, &mark->i.i_list);
+out:
+ fsnotify_recalc_inode_mask_locked(inode);
spin_unlock(&inode->i_lock);
- spin_unlock(&group->mark_lock);
- spin_unlock(&entry->lock);
-
- if (lentry) {
- ret = -EEXIST;
- iput(inode);
- fsnotify_put_mark(lentry);
- } else {
- __fsnotify_update_child_dentry_flags(inode);
- }
return ret;
}
struct inode *need_iput_tmp;
/*
- * We cannot __iget() an inode in state I_CLEAR, I_FREEING,
+ * We cannot __iget() an inode in state I_FREEING,
* I_WILL_FREE, or I_NEW which is fine because by that point
* the inode cannot have any associated watches.
*/
- if (inode->i_state & (I_CLEAR|I_FREEING|I_WILL_FREE|I_NEW))
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
continue;
/*
/* In case the dropping of a reference would nuke next_i. */
if ((&next_i->i_sb_list != list) &&
atomic_read(&next_i->i_count) &&
- !(next_i->i_state & (I_CLEAR | I_FREEING | I_WILL_FREE))) {
+ !(next_i->i_state & (I_FREEING | I_WILL_FREE))) {
__iget(next_i);
need_iput = next_i;
}
-config INOTIFY
- bool "Inotify file change notification support"
- default n
- ---help---
- Say Y here to enable legacy in kernel inotify support. Inotify is a
- file change notification system. It is a replacement for dnotify.
- This option only provides the legacy inotify in kernel API. There
- are no in tree kernel users of this interface since it is deprecated.
- You only need this if you are loading an out of tree kernel module
- that uses inotify.
-
- For more information, see <file:Documentation/filesystems/inotify.txt>
-
- If unsure, say N.
-
config INOTIFY_USER
bool "Inotify support for userspace"
select ANON_INODES
-obj-$(CONFIG_INOTIFY) += inotify.o
obj-$(CONFIG_INOTIFY_USER) += inotify_fsnotify.o inotify_user.o
+++ /dev/null
-/*
- * fs/inotify.c - inode-based file event notifications
- *
- * Authors:
- * John McCutchan <ttb@tentacle.dhs.org>
- * Robert Love <rml@novell.com>
- *
- * Kernel API added by: Amy Griffis <amy.griffis@hp.com>
- *
- * Copyright (C) 2005 John McCutchan
- * Copyright 2006 Hewlett-Packard Development Company, L.P.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/idr.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/writeback.h>
-#include <linux/inotify.h>
-#include <linux/fsnotify_backend.h>
-
-static atomic_t inotify_cookie;
-
-/*
- * Lock ordering:
- *
- * dentry->d_lock (used to keep d_move() away from dentry->d_parent)
- * iprune_mutex (synchronize shrink_icache_memory())
- * inode_lock (protects the super_block->s_inodes list)
- * inode->inotify_mutex (protects inode->inotify_watches and watches->i_list)
- * inotify_handle->mutex (protects inotify_handle and watches->h_list)
- *
- * The inode->inotify_mutex and inotify_handle->mutex and held during execution
- * of a caller's event handler. Thus, the caller must not hold any locks
- * taken in their event handler while calling any of the published inotify
- * interfaces.
- */
-
-/*
- * Lifetimes of the three main data structures--inotify_handle, inode, and
- * inotify_watch--are managed by reference count.
- *
- * inotify_handle: Lifetime is from inotify_init() to inotify_destroy().
- * Additional references can bump the count via get_inotify_handle() and drop
- * the count via put_inotify_handle().
- *
- * inotify_watch: for inotify's purposes, lifetime is from inotify_add_watch()
- * to remove_watch_no_event(). Additional references can bump the count via
- * get_inotify_watch() and drop the count via put_inotify_watch(). The caller
- * is reponsible for the final put after receiving IN_IGNORED, or when using
- * IN_ONESHOT after receiving the first event. Inotify does the final put if
- * inotify_destroy() is called.
- *
- * inode: Pinned so long as the inode is associated with a watch, from
- * inotify_add_watch() to the final put_inotify_watch().
- */
-
-/*
- * struct inotify_handle - represents an inotify instance
- *
- * This structure is protected by the mutex 'mutex'.
- */
-struct inotify_handle {
- struct idr idr; /* idr mapping wd -> watch */
- struct mutex mutex; /* protects this bad boy */
- struct list_head watches; /* list of watches */
- atomic_t count; /* reference count */
- u32 last_wd; /* the last wd allocated */
- const struct inotify_operations *in_ops; /* inotify caller operations */
-};
-
-static inline void get_inotify_handle(struct inotify_handle *ih)
-{
- atomic_inc(&ih->count);
-}
-
-static inline void put_inotify_handle(struct inotify_handle *ih)
-{
- if (atomic_dec_and_test(&ih->count)) {
- idr_destroy(&ih->idr);
- kfree(ih);
- }
-}
-
-/**
- * get_inotify_watch - grab a reference to an inotify_watch
- * @watch: watch to grab
- */
-void get_inotify_watch(struct inotify_watch *watch)
-{
- atomic_inc(&watch->count);
-}
-EXPORT_SYMBOL_GPL(get_inotify_watch);
-
-int pin_inotify_watch(struct inotify_watch *watch)
-{
- struct super_block *sb = watch->inode->i_sb;
- if (atomic_inc_not_zero(&sb->s_active)) {
- atomic_inc(&watch->count);
- return 1;
- }
- return 0;
-}
-
-/**
- * put_inotify_watch - decrements the ref count on a given watch. cleans up
- * watch references if the count reaches zero. inotify_watch is freed by
- * inotify callers via the destroy_watch() op.
- * @watch: watch to release
- */
-void put_inotify_watch(struct inotify_watch *watch)
-{
- if (atomic_dec_and_test(&watch->count)) {
- struct inotify_handle *ih = watch->ih;
-
- iput(watch->inode);
- ih->in_ops->destroy_watch(watch);
- put_inotify_handle(ih);
- }
-}
-EXPORT_SYMBOL_GPL(put_inotify_watch);
-
-void unpin_inotify_watch(struct inotify_watch *watch)
-{
- struct super_block *sb = watch->inode->i_sb;
- put_inotify_watch(watch);
- deactivate_super(sb);
-}
-
-/*
- * inotify_handle_get_wd - returns the next WD for use by the given handle
- *
- * Callers must hold ih->mutex. This function can sleep.
- */
-static int inotify_handle_get_wd(struct inotify_handle *ih,
- struct inotify_watch *watch)
-{
- int ret;
-
- do {
- if (unlikely(!idr_pre_get(&ih->idr, GFP_NOFS)))
- return -ENOSPC;
- ret = idr_get_new_above(&ih->idr, watch, ih->last_wd+1, &watch->wd);
- } while (ret == -EAGAIN);
-
- if (likely(!ret))
- ih->last_wd = watch->wd;
-
- return ret;
-}
-
-/*
- * inotify_inode_watched - returns nonzero if there are watches on this inode
- * and zero otherwise. We call this lockless, we do not care if we race.
- */
-static inline int inotify_inode_watched(struct inode *inode)
-{
- return !list_empty(&inode->inotify_watches);
-}
-
-/*
- * Get child dentry flag into synch with parent inode.
- * Flag should always be clear for negative dentrys.
- */
-static void set_dentry_child_flags(struct inode *inode, int watched)
-{
- struct dentry *alias;
-
- spin_lock(&dcache_lock);
- list_for_each_entry(alias, &inode->i_dentry, d_alias) {
- struct dentry *child;
-
- list_for_each_entry(child, &alias->d_subdirs, d_u.d_child) {
- if (!child->d_inode)
- continue;
-
- spin_lock(&child->d_lock);
- if (watched)
- child->d_flags |= DCACHE_INOTIFY_PARENT_WATCHED;
- else
- child->d_flags &=~DCACHE_INOTIFY_PARENT_WATCHED;
- spin_unlock(&child->d_lock);
- }
- }
- spin_unlock(&dcache_lock);
-}
-
-/*
- * inotify_find_handle - find the watch associated with the given inode and
- * handle
- *
- * Callers must hold inode->inotify_mutex.
- */
-static struct inotify_watch *inode_find_handle(struct inode *inode,
- struct inotify_handle *ih)
-{
- struct inotify_watch *watch;
-
- list_for_each_entry(watch, &inode->inotify_watches, i_list) {
- if (watch->ih == ih)
- return watch;
- }
-
- return NULL;
-}
-
-/*
- * remove_watch_no_event - remove watch without the IN_IGNORED event.
- *
- * Callers must hold both inode->inotify_mutex and ih->mutex.
- */
-static void remove_watch_no_event(struct inotify_watch *watch,
- struct inotify_handle *ih)
-{
- list_del(&watch->i_list);
- list_del(&watch->h_list);
-
- if (!inotify_inode_watched(watch->inode))
- set_dentry_child_flags(watch->inode, 0);
-
- idr_remove(&ih->idr, watch->wd);
-}
-
-/**
- * inotify_remove_watch_locked - Remove a watch from both the handle and the
- * inode. Sends the IN_IGNORED event signifying that the inode is no longer
- * watched. May be invoked from a caller's event handler.
- * @ih: inotify handle associated with watch
- * @watch: watch to remove
- *
- * Callers must hold both inode->inotify_mutex and ih->mutex.
- */
-void inotify_remove_watch_locked(struct inotify_handle *ih,
- struct inotify_watch *watch)
-{
- remove_watch_no_event(watch, ih);
- ih->in_ops->handle_event(watch, watch->wd, IN_IGNORED, 0, NULL, NULL);
-}
-EXPORT_SYMBOL_GPL(inotify_remove_watch_locked);
-
-/* Kernel API for producing events */
-
-/*
- * inotify_d_instantiate - instantiate dcache entry for inode
- */
-void inotify_d_instantiate(struct dentry *entry, struct inode *inode)
-{
- struct dentry *parent;
-
- if (!inode)
- return;
-
- spin_lock(&entry->d_lock);
- parent = entry->d_parent;
- if (parent->d_inode && inotify_inode_watched(parent->d_inode))
- entry->d_flags |= DCACHE_INOTIFY_PARENT_WATCHED;
- spin_unlock(&entry->d_lock);
-}
-
-/*
- * inotify_d_move - dcache entry has been moved
- */
-void inotify_d_move(struct dentry *entry)
-{
- struct dentry *parent;
-
- parent = entry->d_parent;
- if (inotify_inode_watched(parent->d_inode))
- entry->d_flags |= DCACHE_INOTIFY_PARENT_WATCHED;
- else
- entry->d_flags &= ~DCACHE_INOTIFY_PARENT_WATCHED;
-}
-
-/**
- * inotify_inode_queue_event - queue an event to all watches on this inode
- * @inode: inode event is originating from
- * @mask: event mask describing this event
- * @cookie: cookie for synchronization, or zero
- * @name: filename, if any
- * @n_inode: inode associated with name
- */
-void inotify_inode_queue_event(struct inode *inode, u32 mask, u32 cookie,
- const char *name, struct inode *n_inode)
-{
- struct inotify_watch *watch, *next;
-
- if (!inotify_inode_watched(inode))
- return;
-
- mutex_lock(&inode->inotify_mutex);
- list_for_each_entry_safe(watch, next, &inode->inotify_watches, i_list) {
- u32 watch_mask = watch->mask;
- if (watch_mask & mask) {
- struct inotify_handle *ih= watch->ih;
- mutex_lock(&ih->mutex);
- if (watch_mask & IN_ONESHOT)
- remove_watch_no_event(watch, ih);
- ih->in_ops->handle_event(watch, watch->wd, mask, cookie,
- name, n_inode);
- mutex_unlock(&ih->mutex);
- }
- }
- mutex_unlock(&inode->inotify_mutex);
-}
-EXPORT_SYMBOL_GPL(inotify_inode_queue_event);
-
-/**
- * inotify_dentry_parent_queue_event - queue an event to a dentry's parent
- * @dentry: the dentry in question, we queue against this dentry's parent
- * @mask: event mask describing this event
- * @cookie: cookie for synchronization, or zero
- * @name: filename, if any
- */
-void inotify_dentry_parent_queue_event(struct dentry *dentry, u32 mask,
- u32 cookie, const char *name)
-{
- struct dentry *parent;
- struct inode *inode;
-
- if (!(dentry->d_flags & DCACHE_INOTIFY_PARENT_WATCHED))
- return;
-
- spin_lock(&dentry->d_lock);
- parent = dentry->d_parent;
- inode = parent->d_inode;
-
- if (inotify_inode_watched(inode)) {
- dget(parent);
- spin_unlock(&dentry->d_lock);
- inotify_inode_queue_event(inode, mask, cookie, name,
- dentry->d_inode);
- dput(parent);
- } else
- spin_unlock(&dentry->d_lock);
-}
-EXPORT_SYMBOL_GPL(inotify_dentry_parent_queue_event);
-
-/**
- * inotify_get_cookie - return a unique cookie for use in synchronizing events.
- */
-u32 inotify_get_cookie(void)
-{
- return atomic_inc_return(&inotify_cookie);
-}
-EXPORT_SYMBOL_GPL(inotify_get_cookie);
-
-/**
- * inotify_unmount_inodes - an sb is unmounting. handle any watched inodes.
- * @list: list of inodes being unmounted (sb->s_inodes)
- *
- * Called with inode_lock held, protecting the unmounting super block's list
- * of inodes, and with iprune_mutex held, keeping shrink_icache_memory() at bay.
- * We temporarily drop inode_lock, however, and CAN block.
- */
-void inotify_unmount_inodes(struct list_head *list)
-{
- struct inode *inode, *next_i, *need_iput = NULL;
-
- list_for_each_entry_safe(inode, next_i, list, i_sb_list) {
- struct inotify_watch *watch, *next_w;
- struct inode *need_iput_tmp;
- struct list_head *watches;
-
- /*
- * We cannot __iget() an inode in state I_CLEAR, I_FREEING,
- * I_WILL_FREE, or I_NEW which is fine because by that point
- * the inode cannot have any associated watches.
- */
- if (inode->i_state & (I_CLEAR|I_FREEING|I_WILL_FREE|I_NEW))
- continue;
-
- /*
- * If i_count is zero, the inode cannot have any watches and
- * doing an __iget/iput with MS_ACTIVE clear would actually
- * evict all inodes with zero i_count from icache which is
- * unnecessarily violent and may in fact be illegal to do.
- */
- if (!atomic_read(&inode->i_count))
- continue;
-
- need_iput_tmp = need_iput;
- need_iput = NULL;
- /* In case inotify_remove_watch_locked() drops a reference. */
- if (inode != need_iput_tmp)
- __iget(inode);
- else
- need_iput_tmp = NULL;
- /* In case the dropping of a reference would nuke next_i. */
- if ((&next_i->i_sb_list != list) &&
- atomic_read(&next_i->i_count) &&
- !(next_i->i_state & (I_CLEAR | I_FREEING |
- I_WILL_FREE))) {
- __iget(next_i);
- need_iput = next_i;
- }
-
- /*
- * We can safely drop inode_lock here because we hold
- * references on both inode and next_i. Also no new inodes
- * will be added since the umount has begun. Finally,
- * iprune_mutex keeps shrink_icache_memory() away.
- */
- spin_unlock(&inode_lock);
-
- if (need_iput_tmp)
- iput(need_iput_tmp);
-
- /* for each watch, send IN_UNMOUNT and then remove it */
- mutex_lock(&inode->inotify_mutex);
- watches = &inode->inotify_watches;
- list_for_each_entry_safe(watch, next_w, watches, i_list) {
- struct inotify_handle *ih= watch->ih;
- get_inotify_watch(watch);
- mutex_lock(&ih->mutex);
- ih->in_ops->handle_event(watch, watch->wd, IN_UNMOUNT, 0,
- NULL, NULL);
- inotify_remove_watch_locked(ih, watch);
- mutex_unlock(&ih->mutex);
- put_inotify_watch(watch);
- }
- mutex_unlock(&inode->inotify_mutex);
- iput(inode);
-
- spin_lock(&inode_lock);
- }
-}
-EXPORT_SYMBOL_GPL(inotify_unmount_inodes);
-
-/**
- * inotify_inode_is_dead - an inode has been deleted, cleanup any watches
- * @inode: inode that is about to be removed
- */
-void inotify_inode_is_dead(struct inode *inode)
-{
- struct inotify_watch *watch, *next;
-
- mutex_lock(&inode->inotify_mutex);
- list_for_each_entry_safe(watch, next, &inode->inotify_watches, i_list) {
- struct inotify_handle *ih = watch->ih;
- mutex_lock(&ih->mutex);
- inotify_remove_watch_locked(ih, watch);
- mutex_unlock(&ih->mutex);
- }
- mutex_unlock(&inode->inotify_mutex);
-}
-EXPORT_SYMBOL_GPL(inotify_inode_is_dead);
-
-/* Kernel Consumer API */
-
-/**
- * inotify_init - allocate and initialize an inotify instance
- * @ops: caller's inotify operations
- */
-struct inotify_handle *inotify_init(const struct inotify_operations *ops)
-{
- struct inotify_handle *ih;
-
- ih = kmalloc(sizeof(struct inotify_handle), GFP_KERNEL);
- if (unlikely(!ih))
- return ERR_PTR(-ENOMEM);
-
- idr_init(&ih->idr);
- INIT_LIST_HEAD(&ih->watches);
- mutex_init(&ih->mutex);
- ih->last_wd = 0;
- ih->in_ops = ops;
- atomic_set(&ih->count, 0);
- get_inotify_handle(ih);
-
- return ih;
-}
-EXPORT_SYMBOL_GPL(inotify_init);
-
-/**
- * inotify_init_watch - initialize an inotify watch
- * @watch: watch to initialize
- */
-void inotify_init_watch(struct inotify_watch *watch)
-{
- INIT_LIST_HEAD(&watch->h_list);
- INIT_LIST_HEAD(&watch->i_list);
- atomic_set(&watch->count, 0);
- get_inotify_watch(watch); /* initial get */
-}
-EXPORT_SYMBOL_GPL(inotify_init_watch);
-
-/*
- * Watch removals suck violently. To kick the watch out we need (in this
- * order) inode->inotify_mutex and ih->mutex. That's fine if we have
- * a hold on inode; however, for all other cases we need to make damn sure
- * we don't race with umount. We can *NOT* just grab a reference to a
- * watch - inotify_unmount_inodes() will happily sail past it and we'll end
- * with reference to inode potentially outliving its superblock. Ideally
- * we just want to grab an active reference to superblock if we can; that
- * will make sure we won't go into inotify_umount_inodes() until we are
- * done. Cleanup is just deactivate_super(). However, that leaves a messy
- * case - what if we *are* racing with umount() and active references to
- * superblock can't be acquired anymore? We can bump ->s_count, grab
- * ->s_umount, which will wait until the superblock is shut down and the
- * watch in question is pining for fjords.
- *
- * And yes, this is far beyond mere "not very pretty"; so's the entire
- * concept of inotify to start with.
- */
-
-/**
- * pin_to_kill - pin the watch down for removal
- * @ih: inotify handle
- * @watch: watch to kill
- *
- * Called with ih->mutex held, drops it. Possible return values:
- * 0 - nothing to do, it has died
- * 1 - remove it, drop the reference and deactivate_super()
- */
-static int pin_to_kill(struct inotify_handle *ih, struct inotify_watch *watch)
-{
- struct super_block *sb = watch->inode->i_sb;
-
- if (atomic_inc_not_zero(&sb->s_active)) {
- get_inotify_watch(watch);
- mutex_unlock(&ih->mutex);
- return 1; /* the best outcome */
- }
- spin_lock(&sb_lock);
- sb->s_count++;
- spin_unlock(&sb_lock);
- mutex_unlock(&ih->mutex); /* can't grab ->s_umount under it */
- down_read(&sb->s_umount);
- /* fs is already shut down; the watch is dead */
- drop_super(sb);
- return 0;
-}
-
-static void unpin_and_kill(struct inotify_watch *watch)
-{
- struct super_block *sb = watch->inode->i_sb;
- put_inotify_watch(watch);
- deactivate_super(sb);
-}
-
-/**
- * inotify_destroy - clean up and destroy an inotify instance
- * @ih: inotify handle
- */
-void inotify_destroy(struct inotify_handle *ih)
-{
- /*
- * Destroy all of the watches for this handle. Unfortunately, not very
- * pretty. We cannot do a simple iteration over the list, because we
- * do not know the inode until we iterate to the watch. But we need to
- * hold inode->inotify_mutex before ih->mutex. The following works.
- *
- * AV: it had to become even uglier to start working ;-/
- */
- while (1) {
- struct inotify_watch *watch;
- struct list_head *watches;
- struct super_block *sb;
- struct inode *inode;
-
- mutex_lock(&ih->mutex);
- watches = &ih->watches;
- if (list_empty(watches)) {
- mutex_unlock(&ih->mutex);
- break;
- }
- watch = list_first_entry(watches, struct inotify_watch, h_list);
- sb = watch->inode->i_sb;
- if (!pin_to_kill(ih, watch))
- continue;
-
- inode = watch->inode;
- mutex_lock(&inode->inotify_mutex);
- mutex_lock(&ih->mutex);
-
- /* make sure we didn't race with another list removal */
- if (likely(idr_find(&ih->idr, watch->wd))) {
- remove_watch_no_event(watch, ih);
- put_inotify_watch(watch);
- }
-
- mutex_unlock(&ih->mutex);
- mutex_unlock(&inode->inotify_mutex);
- unpin_and_kill(watch);
- }
-
- /* free this handle: the put matching the get in inotify_init() */
- put_inotify_handle(ih);
-}
-EXPORT_SYMBOL_GPL(inotify_destroy);
-
-/**
- * inotify_find_watch - find an existing watch for an (ih,inode) pair
- * @ih: inotify handle
- * @inode: inode to watch
- * @watchp: pointer to existing inotify_watch
- *
- * Caller must pin given inode (via nameidata).
- */
-s32 inotify_find_watch(struct inotify_handle *ih, struct inode *inode,
- struct inotify_watch **watchp)
-{
- struct inotify_watch *old;
- int ret = -ENOENT;
-
- mutex_lock(&inode->inotify_mutex);
- mutex_lock(&ih->mutex);
-
- old = inode_find_handle(inode, ih);
- if (unlikely(old)) {
- get_inotify_watch(old); /* caller must put watch */
- *watchp = old;
- ret = old->wd;
- }
-
- mutex_unlock(&ih->mutex);
- mutex_unlock(&inode->inotify_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(inotify_find_watch);
-
-/**
- * inotify_find_update_watch - find and update the mask of an existing watch
- * @ih: inotify handle
- * @inode: inode's watch to update
- * @mask: mask of events to watch
- *
- * Caller must pin given inode (via nameidata).
- */
-s32 inotify_find_update_watch(struct inotify_handle *ih, struct inode *inode,
- u32 mask)
-{
- struct inotify_watch *old;
- int mask_add = 0;
- int ret;
-
- if (mask & IN_MASK_ADD)
- mask_add = 1;
-
- /* don't allow invalid bits: we don't want flags set */
- mask &= IN_ALL_EVENTS | IN_ONESHOT;
- if (unlikely(!mask))
- return -EINVAL;
-
- mutex_lock(&inode->inotify_mutex);
- mutex_lock(&ih->mutex);
-
- /*
- * Handle the case of re-adding a watch on an (inode,ih) pair that we
- * are already watching. We just update the mask and return its wd.
- */
- old = inode_find_handle(inode, ih);
- if (unlikely(!old)) {
- ret = -ENOENT;
- goto out;
- }
-
- if (mask_add)
- old->mask |= mask;
- else
- old->mask = mask;
- ret = old->wd;
-out:
- mutex_unlock(&ih->mutex);
- mutex_unlock(&inode->inotify_mutex);
- return ret;
-}
-EXPORT_SYMBOL_GPL(inotify_find_update_watch);
-
-/**
- * inotify_add_watch - add a watch to an inotify instance
- * @ih: inotify handle
- * @watch: caller allocated watch structure
- * @inode: inode to watch
- * @mask: mask of events to watch
- *
- * Caller must pin given inode (via nameidata).
- * Caller must ensure it only calls inotify_add_watch() once per watch.
- * Calls inotify_handle_get_wd() so may sleep.
- */
-s32 inotify_add_watch(struct inotify_handle *ih, struct inotify_watch *watch,
- struct inode *inode, u32 mask)
-{
- int ret = 0;
- int newly_watched;
-
- /* don't allow invalid bits: we don't want flags set */
- mask &= IN_ALL_EVENTS | IN_ONESHOT;
- if (unlikely(!mask))
- return -EINVAL;
- watch->mask = mask;
-
- mutex_lock(&inode->inotify_mutex);
- mutex_lock(&ih->mutex);
-
- /* Initialize a new watch */
- ret = inotify_handle_get_wd(ih, watch);
- if (unlikely(ret))
- goto out;
- ret = watch->wd;
-
- /* save a reference to handle and bump the count to make it official */
- get_inotify_handle(ih);
- watch->ih = ih;
-
- /*
- * Save a reference to the inode and bump the ref count to make it
- * official. We hold a reference to nameidata, which makes this safe.
- */
- watch->inode = igrab(inode);
-
- /* Add the watch to the handle's and the inode's list */
- newly_watched = !inotify_inode_watched(inode);
- list_add(&watch->h_list, &ih->watches);
- list_add(&watch->i_list, &inode->inotify_watches);
- /*
- * Set child flags _after_ adding the watch, so there is no race
- * windows where newly instantiated children could miss their parent's
- * watched flag.
- */
- if (newly_watched)
- set_dentry_child_flags(inode, 1);
-
-out:
- mutex_unlock(&ih->mutex);
- mutex_unlock(&inode->inotify_mutex);
- return ret;
-}
-EXPORT_SYMBOL_GPL(inotify_add_watch);
-
-/**
- * inotify_clone_watch - put the watch next to existing one
- * @old: already installed watch
- * @new: new watch
- *
- * Caller must hold the inotify_mutex of inode we are dealing with;
- * it is expected to remove the old watch before unlocking the inode.
- */
-s32 inotify_clone_watch(struct inotify_watch *old, struct inotify_watch *new)
-{
- struct inotify_handle *ih = old->ih;
- int ret = 0;
-
- new->mask = old->mask;
- new->ih = ih;
-
- mutex_lock(&ih->mutex);
-
- /* Initialize a new watch */
- ret = inotify_handle_get_wd(ih, new);
- if (unlikely(ret))
- goto out;
- ret = new->wd;
-
- get_inotify_handle(ih);
-
- new->inode = igrab(old->inode);
-
- list_add(&new->h_list, &ih->watches);
- list_add(&new->i_list, &old->inode->inotify_watches);
-out:
- mutex_unlock(&ih->mutex);
- return ret;
-}
-
-void inotify_evict_watch(struct inotify_watch *watch)
-{
- get_inotify_watch(watch);
- mutex_lock(&watch->ih->mutex);
- inotify_remove_watch_locked(watch->ih, watch);
- mutex_unlock(&watch->ih->mutex);
-}
-
-/**
- * inotify_rm_wd - remove a watch from an inotify instance
- * @ih: inotify handle
- * @wd: watch descriptor to remove
- *
- * Can sleep.
- */
-int inotify_rm_wd(struct inotify_handle *ih, u32 wd)
-{
- struct inotify_watch *watch;
- struct super_block *sb;
- struct inode *inode;
-
- mutex_lock(&ih->mutex);
- watch = idr_find(&ih->idr, wd);
- if (unlikely(!watch)) {
- mutex_unlock(&ih->mutex);
- return -EINVAL;
- }
- sb = watch->inode->i_sb;
- if (!pin_to_kill(ih, watch))
- return 0;
-
- inode = watch->inode;
-
- mutex_lock(&inode->inotify_mutex);
- mutex_lock(&ih->mutex);
-
- /* make sure that we did not race */
- if (likely(idr_find(&ih->idr, wd) == watch))
- inotify_remove_watch_locked(ih, watch);
-
- mutex_unlock(&ih->mutex);
- mutex_unlock(&inode->inotify_mutex);
- unpin_and_kill(watch);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(inotify_rm_wd);
-
-/**
- * inotify_rm_watch - remove a watch from an inotify instance
- * @ih: inotify handle
- * @watch: watch to remove
- *
- * Can sleep.
- */
-int inotify_rm_watch(struct inotify_handle *ih,
- struct inotify_watch *watch)
-{
- return inotify_rm_wd(ih, watch->wd);
-}
-EXPORT_SYMBOL_GPL(inotify_rm_watch);
-
-/*
- * inotify_setup - core initialization function
- */
-static int __init inotify_setup(void)
-{
- BUILD_BUG_ON(IN_ACCESS != FS_ACCESS);
- BUILD_BUG_ON(IN_MODIFY != FS_MODIFY);
- BUILD_BUG_ON(IN_ATTRIB != FS_ATTRIB);
- BUILD_BUG_ON(IN_CLOSE_WRITE != FS_CLOSE_WRITE);
- BUILD_BUG_ON(IN_CLOSE_NOWRITE != FS_CLOSE_NOWRITE);
- BUILD_BUG_ON(IN_OPEN != FS_OPEN);
- BUILD_BUG_ON(IN_MOVED_FROM != FS_MOVED_FROM);
- BUILD_BUG_ON(IN_MOVED_TO != FS_MOVED_TO);
- BUILD_BUG_ON(IN_CREATE != FS_CREATE);
- BUILD_BUG_ON(IN_DELETE != FS_DELETE);
- BUILD_BUG_ON(IN_DELETE_SELF != FS_DELETE_SELF);
- BUILD_BUG_ON(IN_MOVE_SELF != FS_MOVE_SELF);
- BUILD_BUG_ON(IN_Q_OVERFLOW != FS_Q_OVERFLOW);
-
- BUILD_BUG_ON(IN_UNMOUNT != FS_UNMOUNT);
- BUILD_BUG_ON(IN_ISDIR != FS_IN_ISDIR);
- BUILD_BUG_ON(IN_IGNORED != FS_IN_IGNORED);
- BUILD_BUG_ON(IN_ONESHOT != FS_IN_ONESHOT);
-
- atomic_set(&inotify_cookie, 0);
-
- return 0;
-}
-
-module_init(inotify_setup);
int wd;
};
-struct inotify_inode_mark_entry {
- /* fsnotify_mark_entry MUST be the first thing */
- struct fsnotify_mark_entry fsn_entry;
+struct inotify_inode_mark {
+ struct fsnotify_mark fsn_mark;
int wd;
};
-extern void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
+extern void inotify_ignored_and_remove_idr(struct fsnotify_mark *fsn_mark,
struct fsnotify_group *group);
extern void inotify_free_event_priv(struct fsnotify_event_private_data *event_priv);
* General Public License for more details.
*/
+#include <linux/dcache.h> /* d_unlinked */
#include <linux/fs.h> /* struct inode */
#include <linux/fsnotify_backend.h>
#include <linux/inotify.h>
#include "inotify.h"
-static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
+/*
+ * Check if 2 events contain the same information. We do not compare private data
+ * but at this moment that isn't a problem for any know fsnotify listeners.
+ */
+static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new)
+{
+ if ((old->mask == new->mask) &&
+ (old->to_tell == new->to_tell) &&
+ (old->data_type == new->data_type) &&
+ (old->name_len == new->name_len)) {
+ switch (old->data_type) {
+ case (FSNOTIFY_EVENT_INODE):
+ /* remember, after old was put on the wait_q we aren't
+ * allowed to look at the inode any more, only thing
+ * left to check was if the file_name is the same */
+ if (!old->name_len ||
+ !strcmp(old->file_name, new->file_name))
+ return true;
+ break;
+ case (FSNOTIFY_EVENT_PATH):
+ if ((old->path.mnt == new->path.mnt) &&
+ (old->path.dentry == new->path.dentry))
+ return true;
+ break;
+ case (FSNOTIFY_EVENT_NONE):
+ if (old->mask & FS_Q_OVERFLOW)
+ return true;
+ else if (old->mask & FS_IN_IGNORED)
+ return false;
+ return true;
+ };
+ }
+ return false;
+}
+
+static struct fsnotify_event *inotify_merge(struct list_head *list,
+ struct fsnotify_event *event)
{
- struct fsnotify_mark_entry *entry;
- struct inotify_inode_mark_entry *ientry;
+ struct fsnotify_event_holder *last_holder;
+ struct fsnotify_event *last_event;
+
+ /* and the list better be locked by something too */
+ spin_lock(&event->lock);
+
+ last_holder = list_entry(list->prev, struct fsnotify_event_holder, event_list);
+ last_event = last_holder->event;
+ if (event_compare(last_event, event))
+ fsnotify_get_event(last_event);
+ else
+ last_event = NULL;
+
+ spin_unlock(&event->lock);
+
+ return last_event;
+}
+
+static int inotify_handle_event(struct fsnotify_group *group,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
+ struct fsnotify_event *event)
+{
+ struct inotify_inode_mark *i_mark;
struct inode *to_tell;
struct inotify_event_private_data *event_priv;
struct fsnotify_event_private_data *fsn_event_priv;
- int wd, ret;
+ struct fsnotify_event *added_event;
+ int wd, ret = 0;
+
+ BUG_ON(vfsmount_mark);
+
+ pr_debug("%s: group=%p event=%p to_tell=%p mask=%x\n", __func__, group,
+ event, event->to_tell, event->mask);
to_tell = event->to_tell;
- spin_lock(&to_tell->i_lock);
- entry = fsnotify_find_mark_entry(group, to_tell);
- spin_unlock(&to_tell->i_lock);
- /* race with watch removal? We already passes should_send */
- if (unlikely(!entry))
- return 0;
- ientry = container_of(entry, struct inotify_inode_mark_entry,
- fsn_entry);
- wd = ientry->wd;
+ i_mark = container_of(inode_mark, struct inotify_inode_mark,
+ fsn_mark);
+ wd = i_mark->wd;
event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
if (unlikely(!event_priv))
fsn_event_priv->group = group;
event_priv->wd = wd;
- ret = fsnotify_add_notify_event(group, event, fsn_event_priv);
- if (ret) {
+ added_event = fsnotify_add_notify_event(group, event, fsn_event_priv, inotify_merge);
+ if (added_event) {
inotify_free_event_priv(fsn_event_priv);
- /* EEXIST says we tail matched, EOVERFLOW isn't something
- * to report up the stack. */
- if ((ret == -EEXIST) ||
- (ret == -EOVERFLOW))
- ret = 0;
+ if (!IS_ERR(added_event))
+ fsnotify_put_event(added_event);
+ else
+ ret = PTR_ERR(added_event);
}
- /*
- * If we hold the entry until after the event is on the queue
- * IN_IGNORED won't be able to pass this event in the queue
- */
- fsnotify_put_mark(entry);
+ if (inode_mark->mask & IN_ONESHOT)
+ fsnotify_destroy_mark(inode_mark);
return ret;
}
-static void inotify_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
+static void inotify_freeing_mark(struct fsnotify_mark *fsn_mark, struct fsnotify_group *group)
{
- inotify_ignored_and_remove_idr(entry, group);
+ inotify_ignored_and_remove_idr(fsn_mark, group);
}
-static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode, __u32 mask)
+static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
+ __u32 mask, void *data, int data_type)
{
- struct fsnotify_mark_entry *entry;
- bool send;
-
- spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(group, inode);
- spin_unlock(&inode->i_lock);
- if (!entry)
- return false;
+ if ((inode_mark->mask & FS_EXCL_UNLINK) &&
+ (data_type == FSNOTIFY_EVENT_PATH)) {
+ struct path *path = data;
- mask = (mask & ~FS_EVENT_ON_CHILD);
- send = (entry->mask & mask);
-
- /* find took a reference */
- fsnotify_put_mark(entry);
+ if (d_unlinked(path->dentry))
+ return false;
+ }
- return send;
+ return true;
}
/*
*/
static int idr_callback(int id, void *p, void *data)
{
- struct fsnotify_mark_entry *entry;
- struct inotify_inode_mark_entry *ientry;
+ struct fsnotify_mark *fsn_mark;
+ struct inotify_inode_mark *i_mark;
static bool warned = false;
if (warned)
return 0;
warned = true;
- entry = p;
- ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+ fsn_mark = p;
+ i_mark = container_of(fsn_mark, struct inotify_inode_mark, fsn_mark);
- WARN(1, "inotify closing but id=%d for entry=%p in group=%p still in "
+ WARN(1, "inotify closing but id=%d for fsn_mark=%p in group=%p still in "
"idr. Probably leaking memory\n", id, p, data);
/*
* out why we got here and the panic is no worse than the original
* BUG() that was here.
*/
- if (entry)
- printk(KERN_WARNING "entry->group=%p inode=%p wd=%d\n",
- entry->group, entry->inode, ientry->wd);
+ if (fsn_mark)
+ printk(KERN_WARNING "fsn_mark->group=%p inode=%p wd=%d\n",
+ fsn_mark->group, fsn_mark->i.inode, i_mark->wd);
return 0;
}
/* these are configurable via /proc/sys/fs/inotify/ */
static int inotify_max_user_instances __read_mostly;
static int inotify_max_queued_events __read_mostly;
-int inotify_max_user_watches __read_mostly;
+static int inotify_max_user_watches __read_mostly;
static struct kmem_cache *inotify_inode_mark_cachep __read_mostly;
struct kmem_cache *event_priv_cachep __read_mostly;
-/*
- * When inotify registers a new group it increments this and uses that
- * value as an offset to set the fsnotify group "name" and priority.
- */
-static atomic_t inotify_grp_num;
-
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
{
__u32 mask;
- /* everything should accept their own ignored and cares about children */
- mask = (FS_IN_IGNORED | FS_EVENT_ON_CHILD);
+ /*
+ * everything should accept their own ignored, cares about children,
+ * and should receive events when the inode is unmounted
+ */
+ mask = (FS_IN_IGNORED | FS_EVENT_ON_CHILD | FS_UNMOUNT);
/* mask off the flags used to open the fd */
- mask |= (arg & (IN_ALL_EVENTS | IN_ONESHOT));
+ mask |= (arg & (IN_ALL_EVENTS | IN_ONESHOT | IN_EXCL_UNLINK));
return mask;
}
event = fsnotify_peek_notify_event(group);
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
+
if (event->name_len)
event_size += roundup(event->name_len + 1, event_size);
size_t event_size = sizeof(struct inotify_event);
size_t name_len = 0;
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
+
/* we get the inotify watch descriptor from the event private data */
spin_lock(&event->lock);
fsn_priv = fsnotify_remove_priv_from_event(group, event);
kevent = get_one_event(group, count);
mutex_unlock(&group->notification_mutex);
+ pr_debug("%s: group=%p kevent=%p\n", __func__, group, kevent);
+
if (kevent) {
ret = PTR_ERR(kevent);
if (IS_ERR(kevent))
struct fsnotify_group *group = file->private_data;
struct user_struct *user = group->inotify_data.user;
+ pr_debug("%s: group=%p\n", __func__, group);
+
fsnotify_clear_marks_by_group(group);
/* free this group, matching get was inotify_init->fsnotify_obtain_group */
group = file->private_data;
p = (void __user *) arg;
+ pr_debug("%s: group=%p cmd=%u\n", __func__, group, cmd);
+
switch (cmd) {
case FIONREAD:
mutex_lock(&group->notification_mutex);
return error;
}
+static int inotify_add_to_idr(struct idr *idr, spinlock_t *idr_lock,
+ int *last_wd,
+ struct inotify_inode_mark *i_mark)
+{
+ int ret;
+
+ do {
+ if (unlikely(!idr_pre_get(idr, GFP_KERNEL)))
+ return -ENOMEM;
+
+ spin_lock(idr_lock);
+ ret = idr_get_new_above(idr, i_mark, *last_wd + 1,
+ &i_mark->wd);
+ /* we added the mark to the idr, take a reference */
+ if (!ret) {
+ *last_wd = i_mark->wd;
+ fsnotify_get_mark(&i_mark->fsn_mark);
+ }
+ spin_unlock(idr_lock);
+ } while (ret == -EAGAIN);
+
+ return ret;
+}
+
+static struct inotify_inode_mark *inotify_idr_find_locked(struct fsnotify_group *group,
+ int wd)
+{
+ struct idr *idr = &group->inotify_data.idr;
+ spinlock_t *idr_lock = &group->inotify_data.idr_lock;
+ struct inotify_inode_mark *i_mark;
+
+ assert_spin_locked(idr_lock);
+
+ i_mark = idr_find(idr, wd);
+ if (i_mark) {
+ struct fsnotify_mark *fsn_mark = &i_mark->fsn_mark;
+
+ fsnotify_get_mark(fsn_mark);
+ /* One ref for being in the idr, one ref we just took */
+ BUG_ON(atomic_read(&fsn_mark->refcnt) < 2);
+ }
+
+ return i_mark;
+}
+
+static struct inotify_inode_mark *inotify_idr_find(struct fsnotify_group *group,
+ int wd)
+{
+ struct inotify_inode_mark *i_mark;
+ spinlock_t *idr_lock = &group->inotify_data.idr_lock;
+
+ spin_lock(idr_lock);
+ i_mark = inotify_idr_find_locked(group, wd);
+ spin_unlock(idr_lock);
+
+ return i_mark;
+}
+
+static void do_inotify_remove_from_idr(struct fsnotify_group *group,
+ struct inotify_inode_mark *i_mark)
+{
+ struct idr *idr = &group->inotify_data.idr;
+ spinlock_t *idr_lock = &group->inotify_data.idr_lock;
+ int wd = i_mark->wd;
+
+ assert_spin_locked(idr_lock);
+
+ idr_remove(idr, wd);
+
+ /* removed from the idr, drop that ref */
+ fsnotify_put_mark(&i_mark->fsn_mark);
+}
+
/*
* Remove the mark from the idr (if present) and drop the reference
* on the mark because it was in the idr.
*/
static void inotify_remove_from_idr(struct fsnotify_group *group,
- struct inotify_inode_mark_entry *ientry)
+ struct inotify_inode_mark *i_mark)
{
- struct idr *idr;
- struct fsnotify_mark_entry *entry;
- struct inotify_inode_mark_entry *found_ientry;
+ spinlock_t *idr_lock = &group->inotify_data.idr_lock;
+ struct inotify_inode_mark *found_i_mark = NULL;
int wd;
- spin_lock(&group->inotify_data.idr_lock);
- idr = &group->inotify_data.idr;
- wd = ientry->wd;
+ spin_lock(idr_lock);
+ wd = i_mark->wd;
- if (wd == -1)
+ /*
+ * does this i_mark think it is in the idr? we shouldn't get called
+ * if it wasn't....
+ */
+ if (wd == -1) {
+ WARN_ONCE(1, "%s: i_mark=%p i_mark->wd=%d i_mark->group=%p"
+ " i_mark->inode=%p\n", __func__, i_mark, i_mark->wd,
+ i_mark->fsn_mark.group, i_mark->fsn_mark.i.inode);
goto out;
+ }
- entry = idr_find(&group->inotify_data.idr, wd);
- if (unlikely(!entry))
+ /* Lets look in the idr to see if we find it */
+ found_i_mark = inotify_idr_find_locked(group, wd);
+ if (unlikely(!found_i_mark)) {
+ WARN_ONCE(1, "%s: i_mark=%p i_mark->wd=%d i_mark->group=%p"
+ " i_mark->inode=%p\n", __func__, i_mark, i_mark->wd,
+ i_mark->fsn_mark.group, i_mark->fsn_mark.i.inode);
goto out;
+ }
- found_ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
- if (unlikely(found_ientry != ientry)) {
- /* We found an entry in the idr with the right wd, but it's
- * not the entry we were told to remove. eparis seriously
- * fucked up somewhere. */
- WARN_ON(1);
- ientry->wd = -1;
+ /*
+ * We found an mark in the idr at the right wd, but it's
+ * not the mark we were told to remove. eparis seriously
+ * fucked up somewhere.
+ */
+ if (unlikely(found_i_mark != i_mark)) {
+ WARN_ONCE(1, "%s: i_mark=%p i_mark->wd=%d i_mark->group=%p "
+ "mark->inode=%p found_i_mark=%p found_i_mark->wd=%d "
+ "found_i_mark->group=%p found_i_mark->inode=%p\n",
+ __func__, i_mark, i_mark->wd, i_mark->fsn_mark.group,
+ i_mark->fsn_mark.i.inode, found_i_mark, found_i_mark->wd,
+ found_i_mark->fsn_mark.group,
+ found_i_mark->fsn_mark.i.inode);
goto out;
}
- /* One ref for being in the idr, one ref held by the caller */
- BUG_ON(atomic_read(&entry->refcnt) < 2);
-
- idr_remove(idr, wd);
- ientry->wd = -1;
+ /*
+ * One ref for being in the idr
+ * one ref held by the caller trying to kill us
+ * one ref grabbed by inotify_idr_find
+ */
+ if (unlikely(atomic_read(&i_mark->fsn_mark.refcnt) < 3)) {
+ printk(KERN_ERR "%s: i_mark=%p i_mark->wd=%d i_mark->group=%p"
+ " i_mark->inode=%p\n", __func__, i_mark, i_mark->wd,
+ i_mark->fsn_mark.group, i_mark->fsn_mark.i.inode);
+ /* we can't really recover with bad ref cnting.. */
+ BUG();
+ }
- /* removed from the idr, drop that ref */
- fsnotify_put_mark(entry);
+ do_inotify_remove_from_idr(group, i_mark);
out:
- spin_unlock(&group->inotify_data.idr_lock);
+ /* match the ref taken by inotify_idr_find_locked() */
+ if (found_i_mark)
+ fsnotify_put_mark(&found_i_mark->fsn_mark);
+ i_mark->wd = -1;
+ spin_unlock(idr_lock);
}
/*
* Send IN_IGNORED for this wd, remove this wd from the idr.
*/
-void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
+void inotify_ignored_and_remove_idr(struct fsnotify_mark *fsn_mark,
struct fsnotify_group *group)
{
- struct inotify_inode_mark_entry *ientry;
- struct fsnotify_event *ignored_event;
+ struct inotify_inode_mark *i_mark;
+ struct fsnotify_event *ignored_event, *notify_event;
struct inotify_event_private_data *event_priv;
struct fsnotify_event_private_data *fsn_event_priv;
int ret;
if (!ignored_event)
return;
- ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+ i_mark = container_of(fsn_mark, struct inotify_inode_mark, fsn_mark);
event_priv = kmem_cache_alloc(event_priv_cachep, GFP_NOFS);
if (unlikely(!event_priv))
fsn_event_priv = &event_priv->fsnotify_event_priv_data;
fsn_event_priv->group = group;
- event_priv->wd = ientry->wd;
-
- ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv);
- if (ret)
+ event_priv->wd = i_mark->wd;
+
+ notify_event = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv, NULL);
+ if (notify_event) {
+ if (IS_ERR(notify_event))
+ ret = PTR_ERR(notify_event);
+ else
+ fsnotify_put_event(notify_event);
inotify_free_event_priv(fsn_event_priv);
+ }
skip_send_ignore:
/* matches the reference taken when the event was created */
fsnotify_put_event(ignored_event);
- /* remove this entry from the idr */
- inotify_remove_from_idr(group, ientry);
+ /* remove this mark from the idr */
+ inotify_remove_from_idr(group, i_mark);
atomic_dec(&group->inotify_data.user->inotify_watches);
}
/* ding dong the mark is dead */
-static void inotify_free_mark(struct fsnotify_mark_entry *entry)
+static void inotify_free_mark(struct fsnotify_mark *fsn_mark)
{
- struct inotify_inode_mark_entry *ientry = (struct inotify_inode_mark_entry *)entry;
+ struct inotify_inode_mark *i_mark;
+
+ i_mark = container_of(fsn_mark, struct inotify_inode_mark, fsn_mark);
- kmem_cache_free(inotify_inode_mark_cachep, ientry);
+ kmem_cache_free(inotify_inode_mark_cachep, i_mark);
}
static int inotify_update_existing_watch(struct fsnotify_group *group,
struct inode *inode,
u32 arg)
{
- struct fsnotify_mark_entry *entry;
- struct inotify_inode_mark_entry *ientry;
+ struct fsnotify_mark *fsn_mark;
+ struct inotify_inode_mark *i_mark;
__u32 old_mask, new_mask;
__u32 mask;
int add = (arg & IN_MASK_ADD);
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
- if (unlikely(!mask))
+ if (unlikely(!(mask & IN_ALL_EVENTS)))
return -EINVAL;
- spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(group, inode);
- spin_unlock(&inode->i_lock);
- if (!entry)
+ fsn_mark = fsnotify_find_inode_mark(group, inode);
+ if (!fsn_mark)
return -ENOENT;
- ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+ i_mark = container_of(fsn_mark, struct inotify_inode_mark, fsn_mark);
- spin_lock(&entry->lock);
+ spin_lock(&fsn_mark->lock);
- old_mask = entry->mask;
- if (add) {
- entry->mask |= mask;
- new_mask = entry->mask;
- } else {
- entry->mask = mask;
- new_mask = entry->mask;
- }
+ old_mask = fsn_mark->mask;
+ if (add)
+ fsnotify_set_mark_mask_locked(fsn_mark, (fsn_mark->mask | mask));
+ else
+ fsnotify_set_mark_mask_locked(fsn_mark, mask);
+ new_mask = fsn_mark->mask;
- spin_unlock(&entry->lock);
+ spin_unlock(&fsn_mark->lock);
if (old_mask != new_mask) {
/* more bits in old than in new? */
int dropped = (old_mask & ~new_mask);
- /* more bits in this entry than the inode's mask? */
+ /* more bits in this fsn_mark than the inode's mask? */
int do_inode = (new_mask & ~inode->i_fsnotify_mask);
- /* more bits in this entry than the group? */
- int do_group = (new_mask & ~group->mask);
- /* update the inode with this new entry */
+ /* update the inode with this new fsn_mark */
if (dropped || do_inode)
fsnotify_recalc_inode_mask(inode);
- /* update the group mask with the new mask */
- if (dropped || do_group)
- fsnotify_recalc_group_mask(group);
}
/* return the wd */
- ret = ientry->wd;
+ ret = i_mark->wd;
- /* match the get from fsnotify_find_mark_entry() */
- fsnotify_put_mark(entry);
+ /* match the get from fsnotify_find_mark() */
+ fsnotify_put_mark(fsn_mark);
return ret;
}
struct inode *inode,
u32 arg)
{
- struct inotify_inode_mark_entry *tmp_ientry;
+ struct inotify_inode_mark *tmp_i_mark;
__u32 mask;
int ret;
+ struct idr *idr = &group->inotify_data.idr;
+ spinlock_t *idr_lock = &group->inotify_data.idr_lock;
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
- if (unlikely(!mask))
+ if (unlikely(!(mask & IN_ALL_EVENTS)))
return -EINVAL;
- tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
- if (unlikely(!tmp_ientry))
+ tmp_i_mark = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
+ if (unlikely(!tmp_i_mark))
return -ENOMEM;
- fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark);
- tmp_ientry->fsn_entry.mask = mask;
- tmp_ientry->wd = -1;
+ fsnotify_init_mark(&tmp_i_mark->fsn_mark, inotify_free_mark);
+ tmp_i_mark->fsn_mark.mask = mask;
+ tmp_i_mark->wd = -1;
ret = -ENOSPC;
if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
goto out_err;
-retry:
- ret = -ENOMEM;
- if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
- goto out_err;
- /* we are putting the mark on the idr, take a reference */
- fsnotify_get_mark(&tmp_ientry->fsn_entry);
-
- spin_lock(&group->inotify_data.idr_lock);
- ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
- group->inotify_data.last_wd+1,
- &tmp_ientry->wd);
- spin_unlock(&group->inotify_data.idr_lock);
- if (ret) {
- /* we didn't get on the idr, drop the idr reference */
- fsnotify_put_mark(&tmp_ientry->fsn_entry);
-
- /* idr was out of memory allocate and try again */
- if (ret == -EAGAIN)
- goto retry;
+ ret = inotify_add_to_idr(idr, idr_lock, &group->inotify_data.last_wd,
+ tmp_i_mark);
+ if (ret)
goto out_err;
- }
/* we are on the idr, now get on the inode */
- ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
+ ret = fsnotify_add_mark(&tmp_i_mark->fsn_mark, group, inode, NULL, 0);
if (ret) {
/* we failed to get on the inode, get off the idr */
- inotify_remove_from_idr(group, tmp_ientry);
+ inotify_remove_from_idr(group, tmp_i_mark);
goto out_err;
}
- /* update the idr hint, who cares about races, it's just a hint */
- group->inotify_data.last_wd = tmp_ientry->wd;
-
/* increment the number of watches the user has */
atomic_inc(&group->inotify_data.user->inotify_watches);
- /* return the watch descriptor for this new entry */
- ret = tmp_ientry->wd;
-
- /* if this mark added a new event update the group mask */
- if (mask & ~group->mask)
- fsnotify_recalc_group_mask(group);
+ /* return the watch descriptor for this new mark */
+ ret = tmp_i_mark->wd;
out_err:
- /* match the ref from fsnotify_init_markentry() */
- fsnotify_put_mark(&tmp_ientry->fsn_entry);
+ /* match the ref from fsnotify_init_mark() */
+ fsnotify_put_mark(&tmp_i_mark->fsn_mark);
return ret;
}
static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsigned int max_events)
{
struct fsnotify_group *group;
- unsigned int grp_num;
- /* fsnotify_obtain_group took a reference to group, we put this when we kill the file in the end */
- grp_num = (INOTIFY_GROUP_NUM - atomic_inc_return(&inotify_grp_num));
- group = fsnotify_obtain_group(grp_num, 0, &inotify_fsnotify_ops);
+ group = fsnotify_alloc_group(&inotify_fsnotify_ops);
if (IS_ERR(group))
return group;
SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
{
struct fsnotify_group *group;
- struct fsnotify_mark_entry *entry;
+ struct inotify_inode_mark *i_mark;
struct file *filp;
int ret = 0, fput_needed;
return -EBADF;
/* verify that this is indeed an inotify instance */
- if (unlikely(filp->f_op != &inotify_fops)) {
- ret = -EINVAL;
+ ret = -EINVAL;
+ if (unlikely(filp->f_op != &inotify_fops))
goto out;
- }
group = filp->private_data;
- spin_lock(&group->inotify_data.idr_lock);
- entry = idr_find(&group->inotify_data.idr, wd);
- if (unlikely(!entry)) {
- spin_unlock(&group->inotify_data.idr_lock);
- ret = -EINVAL;
+ ret = -EINVAL;
+ i_mark = inotify_idr_find(group, wd);
+ if (unlikely(!i_mark))
goto out;
- }
- fsnotify_get_mark(entry);
- spin_unlock(&group->inotify_data.idr_lock);
- fsnotify_destroy_mark_by_entry(entry);
- fsnotify_put_mark(entry);
+ ret = 0;
+
+ fsnotify_destroy_mark(&i_mark->fsn_mark);
+
+ /* match ref taken by inotify_idr_find */
+ fsnotify_put_mark(&i_mark->fsn_mark);
out:
fput_light(filp, fput_needed);
*/
static int __init inotify_user_setup(void)
{
- inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark_entry, SLAB_PANIC);
+ BUILD_BUG_ON(IN_ACCESS != FS_ACCESS);
+ BUILD_BUG_ON(IN_MODIFY != FS_MODIFY);
+ BUILD_BUG_ON(IN_ATTRIB != FS_ATTRIB);
+ BUILD_BUG_ON(IN_CLOSE_WRITE != FS_CLOSE_WRITE);
+ BUILD_BUG_ON(IN_CLOSE_NOWRITE != FS_CLOSE_NOWRITE);
+ BUILD_BUG_ON(IN_OPEN != FS_OPEN);
+ BUILD_BUG_ON(IN_MOVED_FROM != FS_MOVED_FROM);
+ BUILD_BUG_ON(IN_MOVED_TO != FS_MOVED_TO);
+ BUILD_BUG_ON(IN_CREATE != FS_CREATE);
+ BUILD_BUG_ON(IN_DELETE != FS_DELETE);
+ BUILD_BUG_ON(IN_DELETE_SELF != FS_DELETE_SELF);
+ BUILD_BUG_ON(IN_MOVE_SELF != FS_MOVE_SELF);
+ BUILD_BUG_ON(IN_UNMOUNT != FS_UNMOUNT);
+ BUILD_BUG_ON(IN_Q_OVERFLOW != FS_Q_OVERFLOW);
+ BUILD_BUG_ON(IN_IGNORED != FS_IN_IGNORED);
+ BUILD_BUG_ON(IN_EXCL_UNLINK != FS_EXCL_UNLINK);
+ BUILD_BUG_ON(IN_ISDIR != FS_IN_ISDIR);
+ BUILD_BUG_ON(IN_ONESHOT != FS_IN_ONESHOT);
+
+ BUG_ON(hweight32(ALL_INOTIFY_BITS) != 21);
+
+ inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark, SLAB_PANIC);
event_priv_cachep = KMEM_CACHE(inotify_event_private_data, SLAB_PANIC);
inotify_max_queued_events = 16384;
--- /dev/null
+/*
+ * Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * fsnotify inode mark locking/lifetime/and refcnting
+ *
+ * REFCNT:
+ * The mark->refcnt tells how many "things" in the kernel currently are
+ * referencing this object. The object typically will live inside the kernel
+ * with a refcnt of 2, one for each list it is on (i_list, g_list). Any task
+ * which can find this object holding the appropriete locks, can take a reference
+ * and the object itself is guarenteed to survive until the reference is dropped.
+ *
+ * LOCKING:
+ * There are 3 spinlocks involved with fsnotify inode marks and they MUST
+ * be taken in order as follows:
+ *
+ * mark->lock
+ * group->mark_lock
+ * inode->i_lock
+ *
+ * mark->lock protects 2 things, mark->group and mark->inode. You must hold
+ * that lock to dereference either of these things (they could be NULL even with
+ * the lock)
+ *
+ * group->mark_lock protects the marks_list anchored inside a given group
+ * and each mark is hooked via the g_list. It also sorta protects the
+ * free_g_list, which when used is anchored by a private list on the stack of the
+ * task which held the group->mark_lock.
+ *
+ * inode->i_lock protects the i_fsnotify_marks list anchored inside a
+ * given inode and each mark is hooked via the i_list. (and sorta the
+ * free_i_list)
+ *
+ *
+ * LIFETIME:
+ * Inode marks survive between when they are added to an inode and when their
+ * refcnt==0.
+ *
+ * The inode mark can be cleared for a number of different reasons including:
+ * - The inode is unlinked for the last time. (fsnotify_inode_remove)
+ * - The inode is being evicted from cache. (fsnotify_inode_delete)
+ * - The fs the inode is on is unmounted. (fsnotify_inode_delete/fsnotify_unmount_inodes)
+ * - Something explicitly requests that it be removed. (fsnotify_destroy_mark)
+ * - The fsnotify_group associated with the mark is going away and all such marks
+ * need to be cleaned up. (fsnotify_clear_marks_by_group)
+ *
+ * Worst case we are given an inode and need to clean up all the marks on that
+ * inode. We take i_lock and walk the i_fsnotify_marks safely. For each
+ * mark on the list we take a reference (so the mark can't disappear under us).
+ * We remove that mark form the inode's list of marks and we add this mark to a
+ * private list anchored on the stack using i_free_list; At this point we no
+ * longer fear anything finding the mark using the inode's list of marks.
+ *
+ * We can safely and locklessly run the private list on the stack of everything
+ * we just unattached from the original inode. For each mark on the private list
+ * we grab the mark-> and can thus dereference mark->group and mark->inode. If
+ * we see the group and inode are not NULL we take those locks. Now holding all
+ * 3 locks we can completely remove the mark from other tasks finding it in the
+ * future. Remember, 10 things might already be referencing this mark, but they
+ * better be holding a ref. We drop our reference we took before we unhooked it
+ * from the inode. When the ref hits 0 we can free the mark.
+ *
+ * Very similarly for freeing by group, except we use free_g_list.
+ *
+ * This has the very interesting property of being able to run concurrently with
+ * any (or all) other directions.
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/srcu.h>
+#include <linux/writeback.h> /* for inode_lock */
+
+#include <asm/atomic.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+struct srcu_struct fsnotify_mark_srcu;
+static DEFINE_SPINLOCK(destroy_lock);
+static LIST_HEAD(destroy_list);
+static DECLARE_WAIT_QUEUE_HEAD(destroy_waitq);
+
+void fsnotify_get_mark(struct fsnotify_mark *mark)
+{
+ atomic_inc(&mark->refcnt);
+}
+
+void fsnotify_put_mark(struct fsnotify_mark *mark)
+{
+ if (atomic_dec_and_test(&mark->refcnt))
+ mark->free_mark(mark);
+}
+
+/*
+ * Any time a mark is getting freed we end up here.
+ * The caller had better be holding a reference to this mark so we don't actually
+ * do the final put under the mark->lock
+ */
+void fsnotify_destroy_mark(struct fsnotify_mark *mark)
+{
+ struct fsnotify_group *group;
+ struct inode *inode = NULL;
+
+ spin_lock(&mark->lock);
+
+ group = mark->group;
+
+ /* something else already called this function on this mark */
+ if (!(mark->flags & FSNOTIFY_MARK_FLAG_ALIVE)) {
+ spin_unlock(&mark->lock);
+ return;
+ }
+
+ mark->flags &= ~FSNOTIFY_MARK_FLAG_ALIVE;
+
+ /* 1 from caller and 1 for being on i_list/g_list */
+ BUG_ON(atomic_read(&mark->refcnt) < 2);
+
+ spin_lock(&group->mark_lock);
+
+ if (mark->flags & FSNOTIFY_MARK_FLAG_INODE) {
+ inode = mark->i.inode;
+ fsnotify_destroy_inode_mark(mark);
+ } else if (mark->flags & FSNOTIFY_MARK_FLAG_VFSMOUNT)
+ fsnotify_destroy_vfsmount_mark(mark);
+ else
+ BUG();
+
+ list_del_init(&mark->g_list);
+
+ spin_unlock(&group->mark_lock);
+ spin_unlock(&mark->lock);
+
+ spin_lock(&destroy_lock);
+ list_add(&mark->destroy_list, &destroy_list);
+ spin_unlock(&destroy_lock);
+ wake_up(&destroy_waitq);
+
+ /*
+ * Some groups like to know that marks are being freed. This is a
+ * callback to the group function to let it know that this mark
+ * is being freed.
+ */
+ if (group->ops->freeing_mark)
+ group->ops->freeing_mark(mark, group);
+
+ /*
+ * __fsnotify_update_child_dentry_flags(inode);
+ *
+ * I really want to call that, but we can't, we have no idea if the inode
+ * still exists the second we drop the mark->lock.
+ *
+ * The next time an event arrive to this inode from one of it's children
+ * __fsnotify_parent will see that the inode doesn't care about it's
+ * children and will update all of these flags then. So really this
+ * is just a lazy update (and could be a perf win...)
+ */
+
+ if (inode && (mark->flags & FSNOTIFY_MARK_FLAG_OBJECT_PINNED))
+ iput(inode);
+
+ /*
+ * it's possible that this group tried to destroy itself, but this
+ * this mark was simultaneously being freed by inode. If that's the
+ * case, we finish freeing the group here.
+ */
+ if (unlikely(atomic_dec_and_test(&group->num_marks)))
+ fsnotify_final_destroy_group(group);
+}
+
+void fsnotify_set_mark_mask_locked(struct fsnotify_mark *mark, __u32 mask)
+{
+ assert_spin_locked(&mark->lock);
+
+ mark->mask = mask;
+
+ if (mark->flags & FSNOTIFY_MARK_FLAG_INODE)
+ fsnotify_set_inode_mark_mask_locked(mark, mask);
+}
+
+void fsnotify_set_mark_ignored_mask_locked(struct fsnotify_mark *mark, __u32 mask)
+{
+ assert_spin_locked(&mark->lock);
+
+ mark->ignored_mask = mask;
+}
+
+/*
+ * Attach an initialized mark to a given group and fs object.
+ * These marks may be used for the fsnotify backend to determine which
+ * event types should be delivered to which group.
+ */
+int fsnotify_add_mark(struct fsnotify_mark *mark,
+ struct fsnotify_group *group, struct inode *inode,
+ struct vfsmount *mnt, int allow_dups)
+{
+ int ret = 0;
+
+ BUG_ON(inode && mnt);
+ BUG_ON(!inode && !mnt);
+
+ /*
+ * LOCKING ORDER!!!!
+ * mark->lock
+ * group->mark_lock
+ * inode->i_lock
+ */
+ spin_lock(&mark->lock);
+ spin_lock(&group->mark_lock);
+
+ mark->flags |= FSNOTIFY_MARK_FLAG_ALIVE;
+
+ mark->group = group;
+ list_add(&mark->g_list, &group->marks_list);
+ atomic_inc(&group->num_marks);
+ fsnotify_get_mark(mark); /* for i_list and g_list */
+
+ if (inode) {
+ ret = fsnotify_add_inode_mark(mark, group, inode, allow_dups);
+ if (ret)
+ goto err;
+ } else if (mnt) {
+ ret = fsnotify_add_vfsmount_mark(mark, group, mnt, allow_dups);
+ if (ret)
+ goto err;
+ } else {
+ BUG();
+ }
+
+ spin_unlock(&group->mark_lock);
+
+ /* this will pin the object if appropriate */
+ fsnotify_set_mark_mask_locked(mark, mark->mask);
+
+ spin_unlock(&mark->lock);
+
+ if (inode)
+ __fsnotify_update_child_dentry_flags(inode);
+
+ return ret;
+err:
+ mark->flags &= ~FSNOTIFY_MARK_FLAG_ALIVE;
+ list_del_init(&mark->g_list);
+ mark->group = NULL;
+ atomic_dec(&group->num_marks);
+
+ spin_unlock(&group->mark_lock);
+ spin_unlock(&mark->lock);
+
+ spin_lock(&destroy_lock);
+ list_add(&mark->destroy_list, &destroy_list);
+ spin_unlock(&destroy_lock);
+ wake_up(&destroy_waitq);
+
+ return ret;
+}
+
+/*
+ * clear any marks in a group in which mark->flags & flags is true
+ */
+void fsnotify_clear_marks_by_group_flags(struct fsnotify_group *group,
+ unsigned int flags)
+{
+ struct fsnotify_mark *lmark, *mark;
+ LIST_HEAD(free_list);
+
+ spin_lock(&group->mark_lock);
+ list_for_each_entry_safe(mark, lmark, &group->marks_list, g_list) {
+ if (mark->flags & flags) {
+ list_add(&mark->free_g_list, &free_list);
+ list_del_init(&mark->g_list);
+ fsnotify_get_mark(mark);
+ }
+ }
+ spin_unlock(&group->mark_lock);
+
+ list_for_each_entry_safe(mark, lmark, &free_list, free_g_list) {
+ fsnotify_destroy_mark(mark);
+ fsnotify_put_mark(mark);
+ }
+}
+
+/*
+ * Given a group, destroy all of the marks associated with that group.
+ */
+void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
+{
+ fsnotify_clear_marks_by_group_flags(group, (unsigned int)-1);
+}
+
+void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old)
+{
+ assert_spin_locked(&old->lock);
+ new->i.inode = old->i.inode;
+ new->m.mnt = old->m.mnt;
+ new->group = old->group;
+ new->mask = old->mask;
+ new->free_mark = old->free_mark;
+}
+
+/*
+ * Nothing fancy, just initialize lists and locks and counters.
+ */
+void fsnotify_init_mark(struct fsnotify_mark *mark,
+ void (*free_mark)(struct fsnotify_mark *mark))
+{
+ memset(mark, 0, sizeof(*mark));
+ spin_lock_init(&mark->lock);
+ atomic_set(&mark->refcnt, 1);
+ mark->free_mark = free_mark;
+}
+
+static int fsnotify_mark_destroy(void *ignored)
+{
+ struct fsnotify_mark *mark, *next;
+ LIST_HEAD(private_destroy_list);
+
+ for (;;) {
+ spin_lock(&destroy_lock);
+ /* exchange the list head */
+ list_replace_init(&destroy_list, &private_destroy_list);
+ spin_unlock(&destroy_lock);
+
+ synchronize_srcu(&fsnotify_mark_srcu);
+
+ list_for_each_entry_safe(mark, next, &private_destroy_list, destroy_list) {
+ list_del_init(&mark->destroy_list);
+ fsnotify_put_mark(mark);
+ }
+
+ wait_event_interruptible(destroy_waitq, !list_empty(&destroy_list));
+ }
+
+ return 0;
+}
+
+static int __init fsnotify_mark_init(void)
+{
+ struct task_struct *thread;
+
+ thread = kthread_run(fsnotify_mark_destroy, NULL,
+ "fsnotify_mark");
+ if (IS_ERR(thread))
+ panic("unable to start fsnotify mark destruction thread.");
+
+ return 0;
+}
+device_initcall(fsnotify_mark_init);
* it is needed. It's refcnt is set 1 at kernel init time and will never
* get set to 0 so it will never get 'freed'
*/
-static struct fsnotify_event q_overflow_event;
+static struct fsnotify_event *q_overflow_event;
static atomic_t fsnotify_sync_cookie = ATOMIC_INIT(0);
/**
return;
if (atomic_dec_and_test(&event->refcnt)) {
+ pr_debug("%s: event=%p\n", __func__, event);
+
if (event->data_type == FSNOTIFY_EVENT_PATH)
path_put(&event->path);
BUG_ON(!list_empty(&event->private_data_list));
kfree(event->file_name);
+ put_pid(event->tgid);
kmem_cache_free(fsnotify_event_cachep, event);
}
}
void fsnotify_destroy_event_holder(struct fsnotify_event_holder *holder)
{
- kmem_cache_free(fsnotify_event_holder_cachep, holder);
+ if (holder)
+ kmem_cache_free(fsnotify_event_holder_cachep, holder);
}
/*
return priv;
}
-/*
- * Check if 2 events contain the same information. We do not compare private data
- * but at this moment that isn't a problem for any know fsnotify listeners.
- */
-static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new)
-{
- if ((old->mask == new->mask) &&
- (old->to_tell == new->to_tell) &&
- (old->data_type == new->data_type) &&
- (old->name_len == new->name_len)) {
- switch (old->data_type) {
- case (FSNOTIFY_EVENT_INODE):
- /* remember, after old was put on the wait_q we aren't
- * allowed to look at the inode any more, only thing
- * left to check was if the file_name is the same */
- if (!old->name_len ||
- !strcmp(old->file_name, new->file_name))
- return true;
- break;
- case (FSNOTIFY_EVENT_PATH):
- if ((old->path.mnt == new->path.mnt) &&
- (old->path.dentry == new->path.dentry))
- return true;
- break;
- case (FSNOTIFY_EVENT_NONE):
- if (old->mask & FS_Q_OVERFLOW)
- return true;
- else if (old->mask & FS_IN_IGNORED)
- return false;
- return false;
- };
- }
- return false;
-}
-
/*
* Add an event to the group notification queue. The group can later pull this
* event off the queue to deal with. If the event is successfully added to the
* group's notification queue, a reference is taken on event.
*/
-int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
- struct fsnotify_event_private_data *priv)
+struct fsnotify_event *fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
+ struct fsnotify_event_private_data *priv,
+ struct fsnotify_event *(*merge)(struct list_head *,
+ struct fsnotify_event *))
{
+ struct fsnotify_event *return_event = NULL;
struct fsnotify_event_holder *holder = NULL;
struct list_head *list = &group->notification_list;
- struct fsnotify_event_holder *last_holder;
- struct fsnotify_event *last_event;
- int ret = 0;
+
+ pr_debug("%s: group=%p event=%p priv=%p\n", __func__, group, event, priv);
/*
* There is one fsnotify_event_holder embedded inside each fsnotify_event.
alloc_holder:
holder = fsnotify_alloc_event_holder();
if (!holder)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
}
mutex_lock(&group->notification_mutex);
if (group->q_len >= group->max_events) {
- event = &q_overflow_event;
- ret = -EOVERFLOW;
+ event = q_overflow_event;
+
+ /*
+ * we need to return the overflow event
+ * which means we need a ref
+ */
+ fsnotify_get_event(event);
+ return_event = event;
+
/* sorry, no private data on the overflow event */
priv = NULL;
}
+ if (!list_empty(list) && merge) {
+ struct fsnotify_event *tmp;
+
+ tmp = merge(list, event);
+ if (tmp) {
+ mutex_unlock(&group->notification_mutex);
+
+ if (return_event)
+ fsnotify_put_event(return_event);
+ if (holder != &event->holder)
+ fsnotify_destroy_event_holder(holder);
+ return tmp;
+ }
+ }
+
spin_lock(&event->lock);
if (list_empty(&event->holder.event_list)) {
* event holder was used, go back and get a new one */
spin_unlock(&event->lock);
mutex_unlock(&group->notification_mutex);
- goto alloc_holder;
- }
- if (!list_empty(list)) {
- last_holder = list_entry(list->prev, struct fsnotify_event_holder, event_list);
- last_event = last_holder->event;
- if (event_compare(last_event, event)) {
- spin_unlock(&event->lock);
- mutex_unlock(&group->notification_mutex);
- if (holder != &event->holder)
- fsnotify_destroy_event_holder(holder);
- return -EEXIST;
+ if (return_event) {
+ fsnotify_put_event(return_event);
+ return_event = NULL;
}
+
+ goto alloc_holder;
}
group->q_len++;
mutex_unlock(&group->notification_mutex);
wake_up(&group->notification_waitq);
- return ret;
+ return return_event;
}
/*
BUG_ON(!mutex_is_locked(&group->notification_mutex));
+ pr_debug("%s: group=%p\n", __func__, group);
+
holder = list_first_entry(&group->notification_list, struct fsnotify_event_holder, event_list);
event = holder->event;
static void initialize_event(struct fsnotify_event *event)
{
- event->holder.event = NULL;
INIT_LIST_HEAD(&event->holder.event_list);
atomic_set(&event->refcnt, 1);
spin_lock_init(&event->lock);
- event->path.dentry = NULL;
- event->path.mnt = NULL;
- event->inode = NULL;
- event->data_type = FSNOTIFY_EVENT_NONE;
-
INIT_LIST_HEAD(&event->private_data_list);
+}
+
+/*
+ * Caller damn well better be holding whatever mutex is protecting the
+ * old_holder->event_list and the new_event must be a clean event which
+ * cannot be found anywhere else in the kernel.
+ */
+int fsnotify_replace_event(struct fsnotify_event_holder *old_holder,
+ struct fsnotify_event *new_event)
+{
+ struct fsnotify_event *old_event = old_holder->event;
+ struct fsnotify_event_holder *new_holder = &new_event->holder;
- event->to_tell = NULL;
+ enum event_spinlock_class {
+ SPINLOCK_OLD,
+ SPINLOCK_NEW,
+ };
- event->file_name = NULL;
- event->name_len = 0;
+ pr_debug("%s: old_event=%p new_event=%p\n", __func__, old_event, new_event);
- event->sync_cookie = 0;
+ /*
+ * if the new_event's embedded holder is in use someone
+ * screwed up and didn't give us a clean new event.
+ */
+ BUG_ON(!list_empty(&new_holder->event_list));
+
+ spin_lock_nested(&old_event->lock, SPINLOCK_OLD);
+ spin_lock_nested(&new_event->lock, SPINLOCK_NEW);
+
+ new_holder->event = new_event;
+ list_replace_init(&old_holder->event_list, &new_holder->event_list);
+
+ spin_unlock(&new_event->lock);
+ spin_unlock(&old_event->lock);
+
+ /* event == holder means we are referenced through the in event holder */
+ if (old_holder != &old_event->holder)
+ fsnotify_destroy_event_holder(old_holder);
+
+ fsnotify_get_event(new_event); /* on the list take reference */
+ fsnotify_put_event(old_event); /* off the list, drop reference */
+
+ return 0;
+}
+
+struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event)
+{
+ struct fsnotify_event *event;
+
+ event = kmem_cache_alloc(fsnotify_event_cachep, GFP_KERNEL);
+ if (!event)
+ return NULL;
+
+ pr_debug("%s: old_event=%p new_event=%p\n", __func__, old_event, event);
+
+ memcpy(event, old_event, sizeof(*event));
+ initialize_event(event);
+
+ if (event->name_len) {
+ event->file_name = kstrdup(old_event->file_name, GFP_KERNEL);
+ if (!event->file_name) {
+ kmem_cache_free(fsnotify_event_cachep, event);
+ return NULL;
+ }
+ }
+ event->tgid = get_pid(old_event->tgid);
+ if (event->data_type == FSNOTIFY_EVENT_PATH)
+ path_get(&event->path);
+
+ return event;
}
/*
* @name the filename, if available
*/
struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data,
- int data_type, const char *name, u32 cookie,
- gfp_t gfp)
+ int data_type, const unsigned char *name,
+ u32 cookie, gfp_t gfp)
{
struct fsnotify_event *event;
- event = kmem_cache_alloc(fsnotify_event_cachep, gfp);
+ event = kmem_cache_zalloc(fsnotify_event_cachep, gfp);
if (!event)
return NULL;
+ pr_debug("%s: event=%p to_tell=%p mask=%x data=%p data_type=%d\n",
+ __func__, event, to_tell, mask, data, data_type);
+
initialize_event(event);
if (name) {
event->name_len = strlen(event->file_name);
}
+ event->tgid = get_pid(task_tgid(current));
event->sync_cookie = cookie;
event->to_tell = to_tell;
+ event->data_type = data_type;
switch (data_type) {
- case FSNOTIFY_EVENT_FILE: {
- struct file *file = data;
- struct path *path = &file->f_path;
- event->path.dentry = path->dentry;
- event->path.mnt = path->mnt;
- path_get(&event->path);
- event->data_type = FSNOTIFY_EVENT_PATH;
- break;
- }
case FSNOTIFY_EVENT_PATH: {
struct path *path = data;
event->path.dentry = path->dentry;
event->path.mnt = path->mnt;
path_get(&event->path);
- event->data_type = FSNOTIFY_EVENT_PATH;
break;
}
case FSNOTIFY_EVENT_INODE:
event->inode = data;
- event->data_type = FSNOTIFY_EVENT_INODE;
break;
case FSNOTIFY_EVENT_NONE:
event->inode = NULL;
fsnotify_event_cachep = KMEM_CACHE(fsnotify_event, SLAB_PANIC);
fsnotify_event_holder_cachep = KMEM_CACHE(fsnotify_event_holder, SLAB_PANIC);
- initialize_event(&q_overflow_event);
- q_overflow_event.mask = FS_Q_OVERFLOW;
+ q_overflow_event = fsnotify_create_event(NULL, FS_Q_OVERFLOW, NULL,
+ FSNOTIFY_EVENT_NONE, NULL, 0,
+ GFP_KERNEL);
+ if (!q_overflow_event)
+ panic("unable to allocate fsnotify q_overflow_event\n");
return 0;
}
--- /dev/null
+/*
+ * Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mount.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/writeback.h> /* for inode_lock */
+
+#include <asm/atomic.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+void fsnotify_clear_marks_by_mount(struct vfsmount *mnt)
+{
+ struct fsnotify_mark *mark, *lmark;
+ struct hlist_node *pos, *n;
+ LIST_HEAD(free_list);
+
+ spin_lock(&mnt->mnt_root->d_lock);
+ hlist_for_each_entry_safe(mark, pos, n, &mnt->mnt_fsnotify_marks, m.m_list) {
+ list_add(&mark->m.free_m_list, &free_list);
+ hlist_del_init_rcu(&mark->m.m_list);
+ fsnotify_get_mark(mark);
+ }
+ spin_unlock(&mnt->mnt_root->d_lock);
+
+ list_for_each_entry_safe(mark, lmark, &free_list, m.free_m_list) {
+ fsnotify_destroy_mark(mark);
+ fsnotify_put_mark(mark);
+ }
+}
+
+void fsnotify_clear_vfsmount_marks_by_group(struct fsnotify_group *group)
+{
+ fsnotify_clear_marks_by_group_flags(group, FSNOTIFY_MARK_FLAG_VFSMOUNT);
+}
+
+/*
+ * Recalculate the mask of events relevant to a given vfsmount locked.
+ */
+static void fsnotify_recalc_vfsmount_mask_locked(struct vfsmount *mnt)
+{
+ struct fsnotify_mark *mark;
+ struct hlist_node *pos;
+ __u32 new_mask = 0;
+
+ assert_spin_locked(&mnt->mnt_root->d_lock);
+
+ hlist_for_each_entry(mark, pos, &mnt->mnt_fsnotify_marks, m.m_list)
+ new_mask |= mark->mask;
+ mnt->mnt_fsnotify_mask = new_mask;
+}
+
+/*
+ * Recalculate the mnt->mnt_fsnotify_mask, or the mask of all FS_* event types
+ * any notifier is interested in hearing for this mount point
+ */
+void fsnotify_recalc_vfsmount_mask(struct vfsmount *mnt)
+{
+ spin_lock(&mnt->mnt_root->d_lock);
+ fsnotify_recalc_vfsmount_mask_locked(mnt);
+ spin_unlock(&mnt->mnt_root->d_lock);
+}
+
+void fsnotify_destroy_vfsmount_mark(struct fsnotify_mark *mark)
+{
+ struct vfsmount *mnt = mark->m.mnt;
+
+ assert_spin_locked(&mark->lock);
+ assert_spin_locked(&mark->group->mark_lock);
+
+ spin_lock(&mnt->mnt_root->d_lock);
+
+ hlist_del_init_rcu(&mark->m.m_list);
+ mark->m.mnt = NULL;
+
+ fsnotify_recalc_vfsmount_mask_locked(mnt);
+
+ spin_unlock(&mnt->mnt_root->d_lock);
+}
+
+static struct fsnotify_mark *fsnotify_find_vfsmount_mark_locked(struct fsnotify_group *group,
+ struct vfsmount *mnt)
+{
+ struct fsnotify_mark *mark;
+ struct hlist_node *pos;
+
+ assert_spin_locked(&mnt->mnt_root->d_lock);
+
+ hlist_for_each_entry(mark, pos, &mnt->mnt_fsnotify_marks, m.m_list) {
+ if (mark->group == group) {
+ fsnotify_get_mark(mark);
+ return mark;
+ }
+ }
+ return NULL;
+}
+
+/*
+ * given a group and vfsmount, find the mark associated with that combination.
+ * if found take a reference to that mark and return it, else return NULL
+ */
+struct fsnotify_mark *fsnotify_find_vfsmount_mark(struct fsnotify_group *group,
+ struct vfsmount *mnt)
+{
+ struct fsnotify_mark *mark;
+
+ spin_lock(&mnt->mnt_root->d_lock);
+ mark = fsnotify_find_vfsmount_mark_locked(group, mnt);
+ spin_unlock(&mnt->mnt_root->d_lock);
+
+ return mark;
+}
+
+/*
+ * Attach an initialized mark to a given group and vfsmount.
+ * These marks may be used for the fsnotify backend to determine which
+ * event types should be delivered to which groups.
+ */
+int fsnotify_add_vfsmount_mark(struct fsnotify_mark *mark,
+ struct fsnotify_group *group, struct vfsmount *mnt,
+ int allow_dups)
+{
+ struct fsnotify_mark *lmark;
+ struct hlist_node *node, *last = NULL;
+ int ret = 0;
+
+ mark->flags |= FSNOTIFY_MARK_FLAG_VFSMOUNT;
+
+ assert_spin_locked(&mark->lock);
+ assert_spin_locked(&group->mark_lock);
+
+ spin_lock(&mnt->mnt_root->d_lock);
+
+ mark->m.mnt = mnt;
+
+ /* is mark the first mark? */
+ if (hlist_empty(&mnt->mnt_fsnotify_marks)) {
+ hlist_add_head_rcu(&mark->m.m_list, &mnt->mnt_fsnotify_marks);
+ goto out;
+ }
+
+ /* should mark be in the middle of the current list? */
+ hlist_for_each_entry(lmark, node, &mnt->mnt_fsnotify_marks, m.m_list) {
+ last = node;
+
+ if ((lmark->group == group) && !allow_dups) {
+ ret = -EEXIST;
+ goto out;
+ }
+
+ if (mark->group < lmark->group)
+ continue;
+
+ hlist_add_before_rcu(&mark->m.m_list, &lmark->m.m_list);
+ goto out;
+ }
+
+ BUG_ON(last == NULL);
+ /* mark should be the last entry. last is the current last entry */
+ hlist_add_after_rcu(last, &mark->m.m_list);
+out:
+ fsnotify_recalc_vfsmount_mask_locked(mnt);
+ spin_unlock(&mnt->mnt_root->d_lock);
+
+ return ret;
+}
}
/**
- * ntfs_clear_big_inode - clean up the ntfs specific part of an inode
+ * ntfs_evict_big_inode - clean up the ntfs specific part of an inode
* @vi: vfs inode pending annihilation
*
* When the VFS is going to remove an inode from memory, ntfs_clear_big_inode()
*
* If the MFT record is dirty, we commit it before doing anything else.
*/
-void ntfs_clear_big_inode(struct inode *vi)
+void ntfs_evict_big_inode(struct inode *vi)
{
ntfs_inode *ni = NTFS_I(vi);
+ truncate_inode_pages(&vi->i_data, 0);
+ end_writeback(vi);
+
#ifdef NTFS_RW
if (NInoDirty(ni)) {
bool was_bad = (is_bad_inode(vi));
*
* Called with ->i_mutex held. For the ATTR_SIZE (i.e. ->truncate) case, also
* called with ->i_alloc_sem held for writing.
- *
- * Basically this is a copy of generic notify_change() and inode_setattr()
- * functionality, except we intercept and abort changes in i_size.
*/
int ntfs_setattr(struct dentry *dentry, struct iattr *attr)
{
extern struct inode *ntfs_alloc_big_inode(struct super_block *sb);
extern void ntfs_destroy_big_inode(struct inode *inode);
-extern void ntfs_clear_big_inode(struct inode *vi);
+extern void ntfs_evict_big_inode(struct inode *vi);
extern void __ntfs_init_inode(struct super_block *sb, ntfs_inode *ni);
.put_super = ntfs_put_super, /* Syscall: umount. */
.statfs = ntfs_statfs, /* Syscall: statfs */
.remount_fs = ntfs_remount, /* Syscall: mount -o remount. */
- .clear_inode = ntfs_clear_big_inode, /* VFS: Called when an inode is
+ .evict_inode = ntfs_evict_big_inode, /* VFS: Called when an inode is
removed from memory. */
//.umount_begin = NULL, /* Forced umount. */
.show_options = ntfs_show_options, /* Show mount options in
int ocfs2_check_acl(struct inode *inode, int mask)
{
- struct posix_acl *acl = ocfs2_get_acl(inode, ACL_TYPE_ACCESS);
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
+ struct buffer_head *di_bh = NULL;
+ struct posix_acl *acl;
+ int ret = -EAGAIN;
- if (IS_ERR(acl))
+ if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
+ return ret;
+
+ ret = ocfs2_read_inode_block(inode, &di_bh);
+ if (ret < 0) {
+ mlog_errno(ret);
+ return ret;
+ }
+
+ acl = ocfs2_get_acl_nolock(inode, ACL_TYPE_ACCESS, di_bh);
+
+ brelse(di_bh);
+
+ if (IS_ERR(acl)) {
+ mlog_errno(PTR_ERR(acl));
return PTR_ERR(acl);
+ }
if (acl) {
- int ret = posix_acl_permission(inode, acl, mask);
+ ret = posix_acl_permission(inode, acl, mask);
posix_acl_release(acl);
return ret;
}
{
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct posix_acl *acl = NULL;
- int ret = 0;
+ int ret = 0, ret2;
mode_t mode;
if (!S_ISLNK(inode->i_mode)) {
mode = inode->i_mode;
ret = posix_acl_create_masq(clone, &mode);
if (ret >= 0) {
- ret = ocfs2_acl_set_mode(inode, di_bh, handle, mode);
+ ret2 = ocfs2_acl_set_mode(inode, di_bh, handle, mode);
+ if (ret2) {
+ mlog_errno(ret2);
+ ret = ret2;
+ goto cleanup;
+ }
if (ret > 0) {
ret = ocfs2_set_acl(handle, inode,
di_bh, ACL_TYPE_ACCESS,
if (i_size_read(inode) <= offset)
return 0;
- ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
- inode->i_sb->s_bdev, iov, offset,
- nr_segs,
- ocfs2_direct_IO_get_blocks,
- ocfs2_dio_end_io);
+ ret = __blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev,
+ iov, offset, nr_segs,
+ ocfs2_direct_IO_get_blocks,
+ ocfs2_dio_end_io, NULL, 0);
mlog_exit(ret);
return ret;
struct sockaddr_in sin;
struct socket *new_sock = NULL;
struct o2nm_node *node = NULL;
+ struct o2nm_node *local_node = NULL;
struct o2net_sock_container *sc = NULL;
struct o2net_node *nn;
goto out;
}
- if (o2nm_this_node() > node->nd_num) {
- mlog(ML_NOTICE, "unexpected connect attempted from a lower "
- "numbered node '%s' at " "%pI4:%d with num %u\n",
- node->nd_name, &sin.sin_addr.s_addr,
- ntohs(sin.sin_port), node->nd_num);
+ if (o2nm_this_node() >= node->nd_num) {
+ local_node = o2nm_get_node_by_num(o2nm_this_node());
+ mlog(ML_NOTICE, "unexpected connect attempt seen at node '%s' ("
+ "%u, %pI4:%d) from node '%s' (%u, %pI4:%d)\n",
+ local_node->nd_name, local_node->nd_num,
+ &(local_node->nd_ipv4_address),
+ ntohs(local_node->nd_ipv4_port),
+ node->nd_name, node->nd_num, &sin.sin_addr.s_addr,
+ ntohs(sin.sin_port));
ret = -EINVAL;
goto out;
}
sock_release(new_sock);
if (node)
o2nm_node_put(node);
+ if (local_node)
+ o2nm_node_put(local_node);
if (sc)
sc_put(sc);
return ret;
atomic_dec(&dlm->res_cur_count);
- dlm_put(dlm);
-
if (!hlist_unhashed(&res->hash_node) ||
!list_empty(&res->granted) ||
!list_empty(&res->converting) ||
res->migration_pending = 0;
res->inflight_locks = 0;
- /* put in dlm_lockres_release */
- dlm_grab(dlm);
res->dlm = dlm;
kref_init(&res->refs);
/* check for pre-existing lock */
spin_lock(&dlm->spinlock);
res = __dlm_lookup_lockres(dlm, name, namelen, hash);
- spin_lock(&dlm->master_lock);
-
if (res) {
spin_lock(&res->spinlock);
if (res->state & DLM_LOCK_RES_RECOVERING) {
spin_unlock(&res->spinlock);
}
+ spin_lock(&dlm->master_lock);
/* ignore status. only nonzero status would BUG. */
ret = dlm_add_migration_mle(dlm, res, mle, &oldmle,
name, namelen,
migrate->new_master,
migrate->master);
-unlock:
spin_unlock(&dlm->master_lock);
+unlock:
spin_unlock(&dlm->spinlock);
if (oldmle) {
struct list_head *queue;
struct dlm_lock *lock, *next;
+ assert_spin_locked(&dlm->spinlock);
+ assert_spin_locked(&res->spinlock);
res->state |= DLM_LOCK_RES_RECOVERING;
if (!list_empty(&res->recovering)) {
mlog(0,
/* zero the lvb if necessary */
dlm_revalidate_lvb(dlm, res, dead_node);
if (res->owner == dead_node) {
- if (res->state & DLM_LOCK_RES_DROPPING_REF)
- mlog(0, "%s:%.*s: owned by "
- "dead node %u, this node was "
- "dropping its ref when it died. "
- "continue, dropping the flag.\n",
- dlm->name, res->lockname.len,
- res->lockname.name, dead_node);
-
- /* the wake_up for this will happen when the
- * RECOVERING flag is dropped later */
- res->state &= ~DLM_LOCK_RES_DROPPING_REF;
+ if (res->state & DLM_LOCK_RES_DROPPING_REF) {
+ mlog(ML_NOTICE, "Ignore %.*s for "
+ "recovery as it is being freed\n",
+ res->lockname.len,
+ res->lockname.name);
+ } else
+ dlm_move_lockres_to_recovery_list(dlm,
+ res);
- dlm_move_lockres_to_recovery_list(dlm, res);
} else if (res->owner == dlm->node_num) {
dlm_free_dead_locks(dlm, res, dead_node);
__dlm_lockres_calc_usage(dlm, res);
* truly ready to be freed. */
int __dlm_lockres_unused(struct dlm_lock_resource *res)
{
- if (!__dlm_lockres_has_locks(res) &&
- (list_empty(&res->dirty) && !(res->state & DLM_LOCK_RES_DIRTY))) {
- /* try not to scan the bitmap unless the first two
- * conditions are already true */
- int bit = find_next_bit(res->refmap, O2NM_MAX_NODES, 0);
- if (bit >= O2NM_MAX_NODES) {
- /* since the bit for dlm->node_num is not
- * set, inflight_locks better be zero */
- BUG_ON(res->inflight_locks != 0);
- return 1;
- }
- }
- return 0;
+ int bit;
+
+ if (__dlm_lockres_has_locks(res))
+ return 0;
+
+ if (!list_empty(&res->dirty) || res->state & DLM_LOCK_RES_DIRTY)
+ return 0;
+
+ if (res->state & DLM_LOCK_RES_RECOVERING)
+ return 0;
+
+ bit = find_next_bit(res->refmap, O2NM_MAX_NODES, 0);
+ if (bit < O2NM_MAX_NODES)
+ return 0;
+
+ /*
+ * since the bit for dlm->node_num is not set, inflight_locks better
+ * be zero
+ */
+ BUG_ON(res->inflight_locks != 0);
+ return 1;
}
spin_unlock(&dlm->spinlock);
}
-static int dlm_purge_lockres(struct dlm_ctxt *dlm,
+static void dlm_purge_lockres(struct dlm_ctxt *dlm,
struct dlm_lock_resource *res)
{
int master;
int ret = 0;
- spin_lock(&res->spinlock);
- if (!__dlm_lockres_unused(res)) {
- mlog(0, "%s:%.*s: tried to purge but not unused\n",
- dlm->name, res->lockname.len, res->lockname.name);
- __dlm_print_one_lock_resource(res);
- spin_unlock(&res->spinlock);
- BUG();
- }
-
- if (res->state & DLM_LOCK_RES_MIGRATING) {
- mlog(0, "%s:%.*s: Delay dropref as this lockres is "
- "being remastered\n", dlm->name, res->lockname.len,
- res->lockname.name);
- /* Re-add the lockres to the end of the purge list */
- if (!list_empty(&res->purge)) {
- list_del_init(&res->purge);
- list_add_tail(&res->purge, &dlm->purge_list);
- }
- spin_unlock(&res->spinlock);
- return 0;
- }
+ assert_spin_locked(&dlm->spinlock);
+ assert_spin_locked(&res->spinlock);
master = (res->owner == dlm->node_num);
- if (!master)
- res->state |= DLM_LOCK_RES_DROPPING_REF;
- spin_unlock(&res->spinlock);
mlog(0, "purging lockres %.*s, master = %d\n", res->lockname.len,
res->lockname.name, master);
if (!master) {
+ res->state |= DLM_LOCK_RES_DROPPING_REF;
/* drop spinlock... retake below */
+ spin_unlock(&res->spinlock);
spin_unlock(&dlm->spinlock);
spin_lock(&res->spinlock);
mlog(0, "%s:%.*s: dlm_deref_lockres returned %d\n",
dlm->name, res->lockname.len, res->lockname.name, ret);
spin_lock(&dlm->spinlock);
+ spin_lock(&res->spinlock);
}
- spin_lock(&res->spinlock);
if (!list_empty(&res->purge)) {
mlog(0, "removing lockres %.*s:%p from purgelist, "
"master = %d\n", res->lockname.len, res->lockname.name,
res, master);
list_del_init(&res->purge);
- spin_unlock(&res->spinlock);
dlm_lockres_put(res);
dlm->purge_count--;
- } else
- spin_unlock(&res->spinlock);
+ }
+
+ if (!__dlm_lockres_unused(res)) {
+ mlog(ML_ERROR, "found lockres %s:%.*s: in use after deref\n",
+ dlm->name, res->lockname.len, res->lockname.name);
+ __dlm_print_one_lock_resource(res);
+ BUG();
+ }
__dlm_unhash_lockres(res);
/* lockres is not in the hash now. drop the flag and wake up
* any processes waiting in dlm_get_lock_resource. */
if (!master) {
- spin_lock(&res->spinlock);
res->state &= ~DLM_LOCK_RES_DROPPING_REF;
spin_unlock(&res->spinlock);
wake_up(&res->wq);
- }
- return 0;
+ } else
+ spin_unlock(&res->spinlock);
}
static void dlm_run_purge_list(struct dlm_ctxt *dlm,
lockres = list_entry(dlm->purge_list.next,
struct dlm_lock_resource, purge);
- /* Status of the lockres *might* change so double
- * check. If the lockres is unused, holding the dlm
- * spinlock will prevent people from getting and more
- * refs on it -- there's no need to keep the lockres
- * spinlock. */
spin_lock(&lockres->spinlock);
- unused = __dlm_lockres_unused(lockres);
- spin_unlock(&lockres->spinlock);
-
- if (!unused)
- continue;
purge_jiffies = lockres->last_used +
msecs_to_jiffies(DLM_PURGE_INTERVAL_MS);
* in tail order, we can stop at the first
* unpurgable resource -- anyone added after
* him will have a greater last_used value */
+ spin_unlock(&lockres->spinlock);
break;
}
+ /* Status of the lockres *might* change so double
+ * check. If the lockres is unused, holding the dlm
+ * spinlock will prevent people from getting and more
+ * refs on it. */
+ unused = __dlm_lockres_unused(lockres);
+ if (!unused ||
+ (lockres->state & DLM_LOCK_RES_MIGRATING)) {
+ mlog(0, "lockres %s:%.*s: is in use or "
+ "being remastered, used %d, state %d\n",
+ dlm->name, lockres->lockname.len,
+ lockres->lockname.name, !unused, lockres->state);
+ list_move_tail(&dlm->purge_list, &lockres->purge);
+ spin_unlock(&lockres->spinlock);
+ continue;
+ }
+
dlm_lockres_get(lockres);
- /* This may drop and reacquire the dlm spinlock if it
- * has to do migration. */
- if (dlm_purge_lockres(dlm, lockres))
- BUG();
+ dlm_purge_lockres(dlm, lockres);
dlm_lockres_put(lockres);
attr->ia_valid &= ~ATTR_SIZE;
error = inode_change_ok(inode, attr);
- if (!error)
- error = inode_setattr(inode, attr);
+ if (error)
+ return error;
- return error;
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
static unsigned int dlmfs_file_poll(struct file *file, poll_table *wait)
kmem_cache_free(dlmfs_inode_cache, DLMFS_I(inode));
}
-static void dlmfs_clear_inode(struct inode *inode)
+static void dlmfs_evict_inode(struct inode *inode)
{
int status;
struct dlmfs_inode_private *ip;
- if (!inode)
- return;
+ end_writeback(inode);
mlog(0, "inode %lu\n", inode->i_ino);
.statfs = simple_statfs,
.alloc_inode = dlmfs_alloc_inode,
.destroy_inode = dlmfs_destroy_inode,
- .clear_inode = dlmfs_clear_inode,
+ .evict_inode = dlmfs_evict_inode,
.drop_inode = generic_delete_inode,
};
}
/*
- * This will intentionally not wind up calling simple_setsize(),
+ * This will intentionally not wind up calling truncate_setsize(),
* since all the work for a size change has been done above.
* Otherwise, we could get into problems with truncate as
* ip_alloc_sem is used there to protect against i_size
* changes.
+ *
+ * XXX: this means the conditional below can probably be removed.
*/
- status = inode_setattr(inode, attr);
- if (status < 0) {
- mlog_errno(status);
- goto bail_commit;
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ status = vmtruncate(inode, attr->ia_size);
+ if (status) {
+ mlog_errno(status);
+ goto bail_commit;
+ }
}
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
status = ocfs2_mark_inode_dirty(handle, inode, bh);
if (status < 0)
mlog_errno(status);
* blocks outside i_size. Trim these off again.
* Don't need i_size_read because we hold i_mutex.
*
- * XXX(hch): this looks buggy because ocfs2 did not
+ * XXX(truncate): this looks buggy because ocfs2 did not
* actually implement ->truncate. Take a look at
* the new truncate sequence and update this accordingly
*/
if (*ppos + count > inode->i_size)
- simple_setsize(inode, inode->i_size);
+ truncate_setsize(inode, inode->i_size);
ret = written;
goto out_dio;
}
truncate_inode_pages(&inode->i_data, 0);
}
-void ocfs2_delete_inode(struct inode *inode)
+static void ocfs2_delete_inode(struct inode *inode)
{
int wipe, status;
sigset_t oldset;
bail_unblock:
ocfs2_unblock_signals(&oldset);
bail:
- clear_inode(inode);
mlog_exit_void();
}
-void ocfs2_clear_inode(struct inode *inode)
+static void ocfs2_clear_inode(struct inode *inode)
{
int status;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
mlog_entry_void();
- if (!inode)
- goto bail;
-
+ end_writeback(inode);
mlog(0, "Clearing inode: %llu, nlink = %u\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno, inode->i_nlink);
jbd2_journal_release_jbd_inode(OCFS2_SB(inode->i_sb)->journal->j_journal,
&oi->ip_jinode);
-bail:
mlog_exit_void();
}
+void ocfs2_evict_inode(struct inode *inode)
+{
+ if (!inode->i_nlink ||
+ (OCFS2_I(inode)->ip_flags & OCFS2_INODE_MAYBE_ORPHANED)) {
+ ocfs2_delete_inode(inode);
+ } else {
+ truncate_inode_pages(&inode->i_data, 0);
+ }
+ ocfs2_clear_inode(inode);
+}
+
/* Called under inode_lock, with no more references on the
* struct inode, so it's safe here to check the flags field
* and to manipulate i_nlink without any other locks. */
-void ocfs2_drop_inode(struct inode *inode)
+int ocfs2_drop_inode(struct inode *inode)
{
struct ocfs2_inode_info *oi = OCFS2_I(inode);
+ int res;
mlog_entry_void();
(unsigned long long)oi->ip_blkno, inode->i_nlink, oi->ip_flags);
if (oi->ip_flags & OCFS2_INODE_MAYBE_ORPHANED)
- generic_delete_inode(inode);
+ res = 1;
else
- generic_drop_inode(inode);
+ res = generic_drop_inode(inode);
mlog_exit_void();
+ return res;
}
/*
return &OCFS2_I(inode)->ip_metadata_cache;
}
-void ocfs2_clear_inode(struct inode *inode);
-void ocfs2_delete_inode(struct inode *inode);
-void ocfs2_drop_inode(struct inode *inode);
+void ocfs2_evict_inode(struct inode *inode);
+int ocfs2_drop_inode(struct inode *inode);
/* Flags for ocfs2_iget() */
#define OCFS2_FI_FLAG_SYSFILE 0x1
len = min((u64)cpos + clusters, le64_to_cpu(rec.r_cpos) +
le32_to_cpu(rec.r_clusters)) - cpos;
/*
- * If the refcount rec already exist, cool. We just need
- * to check whether there is a split. Otherwise we just need
- * to increase the refcount.
- * If we will insert one, increases recs_add.
- *
* We record all the records which will be inserted to the
* same refcount block, so that we can tell exactly whether
* we need a new refcount block or not.
+ *
+ * If we will insert a new one, this is easy and only happens
+ * during adding refcounted flag to the extent, so we don't
+ * have a chance of spliting. We just need one record.
+ *
+ * If the refcount rec already exists, that would be a little
+ * complicated. we may have to:
+ * 1) split at the beginning if the start pos isn't aligned.
+ * we need 1 more record in this case.
+ * 2) split int the end if the end pos isn't aligned.
+ * we need 1 more record in this case.
+ * 3) split in the middle because of file system fragmentation.
+ * we need 2 more records in this case(we can't detect this
+ * beforehand, so always think of the worst case).
*/
if (rec.r_refcount) {
+ recs_add += 2;
/* Check whether we need a split at the beginning. */
if (cpos == start_cpos &&
cpos != le64_to_cpu(rec.r_cpos))
.alloc_inode = ocfs2_alloc_inode,
.destroy_inode = ocfs2_destroy_inode,
.drop_inode = ocfs2_drop_inode,
- .clear_inode = ocfs2_clear_inode,
- .delete_inode = ocfs2_delete_inode,
+ .evict_inode = ocfs2_evict_inode,
.sync_fs = ocfs2_sync_fs,
.put_super = ocfs2_put_super,
.remount_fs = ocfs2_remount,
const char *name, int namelen, int *ofs)
{
int nbuckets = (dir->i_size - OMFS_DIR_START)/8;
- int block = clus_to_blk(OMFS_SB(dir->i_sb), dir->i_ino);
int bucket = omfs_hash(name, namelen, nbuckets);
*ofs = OMFS_DIR_START + bucket * 8;
- return sb_bread(dir->i_sb, block);
+ return omfs_bread(dir->i_sb, dir->i_ino);
}
static struct buffer_head *omfs_scan_list(struct inode *dir, u64 block,
*prev_block = ~0;
while (block != ~0) {
- bh = sb_bread(dir->i_sb,
- clus_to_blk(OMFS_SB(dir->i_sb), block));
+ bh = omfs_bread(dir->i_sb, block);
if (!bh) {
err = -EIO;
goto err;
int omfs_make_empty(struct inode *inode, struct super_block *sb)
{
struct omfs_sb_info *sbi = OMFS_SB(sb);
- int block = clus_to_blk(sbi, inode->i_ino);
struct buffer_head *bh;
struct omfs_inode *oi;
- bh = sb_bread(sb, block);
+ bh = omfs_bread(sb, inode->i_ino);
if (!bh)
return -ENOMEM;
brelse(bh);
/* now set the sibling and parent pointers on the new inode */
- bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb), inode->i_ino));
+ bh = omfs_bread(dir->i_sb, inode->i_ino);
if (!bh)
goto out;
if (prev != ~0) {
/* found in middle of list, get list ptr */
brelse(bh);
- bh = sb_bread(dir->i_sb,
- clus_to_blk(OMFS_SB(dir->i_sb), prev));
+ bh = omfs_bread(dir->i_sb, prev);
if (!bh)
goto out;
u64 *ptr;
int i;
- bh = sb_bread(inode->i_sb, clus_to_blk(OMFS_SB(inode->i_sb),
- inode->i_ino));
+ bh = omfs_bread(inode->i_sb, inode->i_ino);
if (!bh)
return 0;
/* follow chain in this bucket */
while (fsblock != ~0) {
- bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb),
- fsblock));
+ bh = omfs_bread(dir->i_sb, fsblock);
if (!bh)
goto out;
hchain = (filp->f_pos >> 20) - 1;
hindex = filp->f_pos & 0xfffff;
- bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb), dir->i_ino));
+ bh = omfs_bread(dir->i_sb, dir->i_ino);
if (!bh)
goto out;
if (inode->i_size != 0)
goto out;
- bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+ bh = omfs_bread(inode->i_sb, next);
if (!bh)
goto out;
if (next == ~0)
break;
- bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+ bh = omfs_bread(inode->i_sb, next);
if (!bh)
goto out;
oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
struct buffer_head *bh;
sector_t next, offset;
int ret;
- u64 new_block;
+ u64 uninitialized_var(new_block);
u32 max_extents;
int extent_count;
struct omfs_extent *oe;
int remain;
ret = -EIO;
- bh = sb_bread(inode->i_sb, clus_to_blk(sbi, inode->i_ino));
+ bh = omfs_bread(inode->i_sb, inode->i_ino);
if (!bh)
goto out;
break;
brelse(bh);
- bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+ bh = omfs_bread(inode->i_sb, next);
if (!bh)
goto out;
oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags,
- pagep, fsdata, omfs_get_block);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep,
+ omfs_get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t omfs_bmap(struct address_space *mapping, sector_t block)
.splice_read = generic_file_splice_read,
};
+static int omfs_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
+}
+
const struct inode_operations omfs_file_inops = {
+ .setattr = omfs_setattr,
.truncate = omfs_truncate
};
MODULE_DESCRIPTION("OMFS (ReplayTV/Karma) Filesystem for Linux");
MODULE_LICENSE("GPL");
+struct buffer_head *omfs_bread(struct super_block *sb, sector_t block)
+{
+ struct omfs_sb_info *sbi = OMFS_SB(sb);
+ if (block >= sbi->s_num_blocks)
+ return NULL;
+
+ return sb_bread(sb, clus_to_blk(sbi, block));
+}
+
struct inode *omfs_new_inode(struct inode *dir, int mode)
{
struct inode *inode;
struct omfs_inode *oi;
struct omfs_sb_info *sbi = OMFS_SB(inode->i_sb);
struct buffer_head *bh, *bh2;
- unsigned int block;
u64 ctime;
int i;
int ret = -EIO;
int sync_failed = 0;
/* get current inode since we may have written sibling ptrs etc. */
- block = clus_to_blk(sbi, inode->i_ino);
- bh = sb_bread(inode->i_sb, block);
+ bh = omfs_bread(inode->i_sb, inode->i_ino);
if (!bh)
goto out;
/* if mirroring writes, copy to next fsblock */
for (i = 1; i < sbi->s_mirrors; i++) {
- bh2 = sb_bread(inode->i_sb, block + i *
- (sbi->s_blocksize / sbi->s_sys_blocksize));
+ bh2 = omfs_bread(inode->i_sb, inode->i_ino + i);
if (!bh2)
goto out_brelse;
* called when an entry is deleted, need to clear the bits in the
* bitmaps.
*/
-static void omfs_delete_inode(struct inode *inode)
+static void omfs_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
+
+ if (inode->i_nlink)
+ return;
if (S_ISREG(inode->i_mode)) {
inode->i_size = 0;
}
omfs_clear_range(inode->i_sb, inode->i_ino, 2);
- clear_inode(inode);
}
struct inode *omfs_iget(struct super_block *sb, ino_t ino)
struct omfs_sb_info *sbi = OMFS_SB(sb);
struct omfs_inode *oi;
struct buffer_head *bh;
- unsigned int block;
u64 ctime;
unsigned long nsecs;
struct inode *inode;
if (!(inode->i_state & I_NEW))
return inode;
- block = clus_to_blk(sbi, ino);
- bh = sb_bread(inode->i_sb, block);
+ bh = omfs_bread(inode->i_sb, ino);
if (!bh)
goto iget_failed;
static const struct super_operations omfs_sops = {
.write_inode = omfs_write_inode,
- .delete_inode = omfs_delete_inode,
+ .evict_inode = omfs_evict_inode,
.put_super = omfs_put_super,
.statfs = omfs_statfs,
.show_options = generic_show_options,
goto nomem;
block = clus_to_blk(sbi, sbi->s_bitmap_ino);
+ if (block >= sbi->s_num_blocks)
+ goto nomem;
+
ptr = sbi->s_imap;
for (count = bitmap_size; count > 0; count -= sb->s_blocksize) {
bh = sb_bread(sb, block++);
struct omfs_root_block *omfs_rb;
struct omfs_sb_info *sbi;
struct inode *root;
- sector_t start;
int ret = -EINVAL;
save_mount_options(sb, (char *) data);
sbi->s_block_shift = get_bitmask_order(sbi->s_blocksize) -
get_bitmask_order(sbi->s_sys_blocksize);
- start = clus_to_blk(sbi, be64_to_cpu(omfs_sb->s_root_block));
- bh2 = sb_bread(sb, start);
+ bh2 = omfs_bread(sb, be64_to_cpu(omfs_sb->s_root_block));
if (!bh2)
goto out_brelse_bh;
goto out_brelse_bh2;
}
+ if (sbi->s_bitmap_ino != ~0ULL &&
+ sbi->s_bitmap_ino > sbi->s_num_blocks) {
+ printk(KERN_ERR "omfs: free space bitmap location is corrupt "
+ "(%llx, total blocks %llx)\n",
+ (unsigned long long) sbi->s_bitmap_ino,
+ (unsigned long long) sbi->s_num_blocks);
+ goto out_brelse_bh2;
+ }
+ if (sbi->s_clustersize < 1 ||
+ sbi->s_clustersize > OMFS_MAX_CLUSTER_SIZE) {
+ printk(KERN_ERR "omfs: cluster size out of range (%d)",
+ sbi->s_clustersize);
+ goto out_brelse_bh2;
+ }
+
ret = omfs_get_imap(sb);
if (ret)
goto out_brelse_bh2;
out_brelse_bh:
brelse(bh);
end:
+ if (ret)
+ kfree(sbi);
return ret;
}
extern int omfs_shrink_inode(struct inode *inode);
/* inode.c */
+extern struct buffer_head *omfs_bread(struct super_block *sb, sector_t block);
extern struct inode *omfs_iget(struct super_block *sb, ino_t inode);
extern struct inode *omfs_new_inode(struct inode *dir, int mode);
extern int omfs_reserve_block(struct super_block *sb, sector_t block);
#define OMFS_EXTENT_CONT 0x40
#define OMFS_XOR_COUNT 19
#define OMFS_MAX_BLOCK_SIZE 8192
+#define OMFS_MAX_CLUSTER_SIZE 8
struct omfs_super_block {
char s_fill1[256];
#include <linux/falloc.h>
#include <linux/fs_struct.h>
#include <linux/ima.h>
+#include <linux/dnotify.h>
#include "internal.h"
f->f_path.mnt = mnt;
f->f_pos = 0;
f->f_op = fops_get(inode->i_fop);
- file_move(f, &inode->i_sb->s_files);
+ file_sb_list_add(f, inode->i_sb);
error = security_dentry_open(f, cred);
if (error)
mnt_drop_write(mnt);
}
}
- file_kill(f);
+ file_sb_list_del(f);
f->f_path.dentry = NULL;
f->f_path.mnt = NULL;
cleanup_file:
put_unused_fd(fd);
fd = PTR_ERR(f);
} else {
- fsnotify_open(f->f_path.dentry);
+ fsnotify_open(f);
fd_install(fd, f);
}
}
/*
* This is used by subsystems that don't want seekable
- * file descriptors
+ * file descriptors. The function is not supposed to ever fail, the only
+ * reason it returns an 'int' and not 'void' is so that it can be plugged
+ * directly into file_operations structure.
*/
int nonseekable_open(struct inode *inode, struct file *filp)
{
nr_sects = (le32_to_cpu(dr->disc_size_high) << 23) |
(le32_to_cpu(dr->disc_size) >> 9);
- if (name)
- printk(" [%s]", name);
+ if (name) {
+ strlcat(state->pp_buf, " [", PAGE_SIZE);
+ strlcat(state->pp_buf, name, PAGE_SIZE);
+ strlcat(state->pp_buf, "]", PAGE_SIZE);
+ }
put_partition(state, slot, first_sector, nr_sects);
return dr;
}
if (!rr)
return -1;
- printk(" [RISCiX]");
+ strlcat(state->pp_buf, " [RISCiX]", PAGE_SIZE);
if (rr->magic == RISCIX_MAGIC) {
unsigned long size = nr_sects > 2 ? 2 : nr_sects;
int part;
- printk(" <");
+ strlcat(state->pp_buf, " <", PAGE_SIZE);
put_partition(state, slot++, first_sect, size);
for (part = 0; part < 8; part++) {
put_partition(state, slot++,
le32_to_cpu(rr->part[part].start),
le32_to_cpu(rr->part[part].length));
- printk("(%s)", rr->part[part].name);
+ strlcat(state->pp_buf, "(", PAGE_SIZE);
+ strlcat(state->pp_buf, rr->part[part].name, PAGE_SIZE);
+ strlcat(state->pp_buf, ")", PAGE_SIZE);
}
}
- printk(" >\n");
+ strlcat(state->pp_buf, " >\n", PAGE_SIZE);
} else {
put_partition(state, slot++, first_sect, nr_sects);
}
struct linux_part *linuxp;
unsigned long size = nr_sects > 2 ? 2 : nr_sects;
- printk(" [Linux]");
+ strlcat(state->pp_buf, " [Linux]", PAGE_SIZE);
put_partition(state, slot++, first_sect, size);
if (!linuxp)
return -1;
- printk(" <");
+ strlcat(state->pp_buf, " <", PAGE_SIZE);
while (linuxp->magic == cpu_to_le32(LINUX_NATIVE_MAGIC) ||
linuxp->magic == cpu_to_le32(LINUX_SWAP_MAGIC)) {
if (slot == state->limit)
le32_to_cpu(linuxp->nr_sects));
linuxp ++;
}
- printk(" >");
+ strlcat(state->pp_buf, " >", PAGE_SIZE);
put_dev_sector(sect);
return slot;
break;
}
}
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
return 1;
}
#endif
return 0;
}
- printk(" [ICS]");
+ strlcat(state->pp_buf, " [ICS]", PAGE_SIZE);
for (slot = 1, p = (const struct ics_part *)data; p->size; p++) {
u32 start = le32_to_cpu(p->start);
}
put_dev_sector(sect);
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
return 1;
}
#endif
return 0;
}
- printk(" [POWERTEC]");
+ strlcat(state->pp_buf, " [POWERTEC]", PAGE_SIZE);
for (i = 0, p = (const struct ptec_part *)data; i < 12; i++, p++) {
u32 start = le32_to_cpu(p->start);
}
put_dev_sector(sect);
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
return 1;
}
#endif
size = get_capacity(state->bdev->bd_disk);
put_partition(state, slot++, start, size - start);
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
}
return i ? 1 : 0;
/* blksize is blocks per 512 byte standard block */
blksize = be32_to_cpu( rdb->rdb_BlockBytes ) / 512;
- printk(" RDSK (%d)", blksize * 512); /* Be more informative */
+ {
+ char tmp[7 + 10 + 1 + 1];
+
+ /* Be more informative */
+ snprintf(tmp, sizeof(tmp), " RDSK (%d)", blksize * 512);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
+ }
blk = be32_to_cpu(rdb->rdb_PartitionList);
put_dev_sector(sect);
for (part = 1; blk>0 && part<=16; part++, put_dev_sector(sect)) {
{
/* Be even more informative to aid mounting */
char dostype[4];
+ char tmp[42];
+
__be32 *dt = (__be32 *)dostype;
*dt = pb->pb_Environment[16];
if (dostype[3] < ' ')
- printk(" (%c%c%c^%c)",
+ snprintf(tmp, sizeof(tmp), " (%c%c%c^%c)",
dostype[0], dostype[1],
dostype[2], dostype[3] + '@' );
else
- printk(" (%c%c%c%c)",
+ snprintf(tmp, sizeof(tmp), " (%c%c%c%c)",
dostype[0], dostype[1],
dostype[2], dostype[3]);
- printk("(res %d spb %d)",
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
+ snprintf(tmp, sizeof(tmp), "(res %d spb %d)",
be32_to_cpu(pb->pb_Environment[6]),
be32_to_cpu(pb->pb_Environment[4]));
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
}
res = 1;
}
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
rdb_done:
return res;
}
pi = &rs->part[0];
- printk (" AHDI");
+ strlcat(state->pp_buf, " AHDI", PAGE_SIZE);
for (slot = 1; pi < &rs->part[4] && slot < state->limit; slot++, pi++) {
struct rootsector *xrs;
Sector sect2;
#ifdef ICD_PARTS
part_fmt = 1;
#endif
- printk(" XGM<");
+ strlcat(state->pp_buf, " XGM<", PAGE_SIZE);
partsect = extensect = be32_to_cpu(pi->st);
while (1) {
xrs = read_part_sector(state, partsect, §2);
break;
}
}
- printk(" >");
+ strlcat(state->pp_buf, " >", PAGE_SIZE);
}
#ifdef ICD_PARTS
if ( part_fmt!=1 ) { /* no extended partitions -> test ICD-format */
pi = &rs->icdpart[0];
/* sanity check: no ICD format if first partition invalid */
if (OK_id(pi->id)) {
- printk(" ICD<");
+ strlcat(state->pp_buf, " ICD<", PAGE_SIZE);
for (; pi < &rs->icdpart[8] && slot < state->limit; slot++, pi++) {
/* accept only GEM,BGM,RAW,LNX,SWP partitions */
if (!((pi->flg & 1) && OK_id(pi->id)))
be32_to_cpu(pi->st),
be32_to_cpu(pi->siz));
}
- printk(" >");
+ strlcat(state->pp_buf, " >", PAGE_SIZE);
}
}
#endif
put_dev_sector(sect);
- printk ("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
return 1;
}
state = kzalloc(sizeof(struct parsed_partitions), GFP_KERNEL);
if (!state)
return NULL;
+ state->pp_buf = (char *)__get_free_page(GFP_KERNEL);
+ if (!state->pp_buf) {
+ kfree(state);
+ return NULL;
+ }
+ state->pp_buf[0] = '\0';
state->bdev = bdev;
disk_name(hd, 0, state->name);
- printk(KERN_INFO " %s:", state->name);
+ snprintf(state->pp_buf, PAGE_SIZE, " %s:", state->name);
if (isdigit(state->name[strlen(state->name)-1]))
sprintf(state->name, "p");
}
}
- if (res > 0)
+ if (res > 0) {
+ printk(KERN_INFO "%s", state->pp_buf);
+
+ free_page((unsigned long)state->pp_buf);
return state;
+ }
if (state->access_beyond_eod)
err = -ENOSPC;
if (err)
/* The partition is unrecognized. So report I/O errors if there were any */
res = err;
if (!res)
- printk(" unknown partition table\n");
+ strlcat(state->pp_buf, " unknown partition table\n", PAGE_SIZE);
else if (warn_no_part)
- printk(" unable to read partition table\n");
+ strlcat(state->pp_buf, " unable to read partition table\n", PAGE_SIZE);
+
+ printk(KERN_INFO "%s", state->pp_buf);
+
+ free_page((unsigned long)state->pp_buf);
kfree(state);
return ERR_PTR(res);
}
int next;
int limit;
bool access_beyond_eod;
+ char *pp_buf;
};
static inline void *read_part_sector(struct parsed_partitions *state,
put_partition(struct parsed_partitions *p, int n, sector_t from, sector_t size)
{
if (n < p->limit) {
+ char tmp[1 + BDEVNAME_SIZE + 10 + 1];
+
p->parts[n].from = from;
p->parts[n].size = size;
- printk(" %s%d", p->name, n);
+ snprintf(tmp, sizeof(tmp), " %s%d", p->name, n);
+ strlcat(p->pp_buf, tmp, PAGE_SIZE);
}
}
}
kfree(ptes);
kfree(gpt);
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
return 1;
}
unsigned char *data;
Sector sect;
sector_t labelsect;
+ char tmp[64];
res = 0;
blocksize = bdev_logical_block_size(bdev);
*/
blocksize = label->cms.block_size;
if (label->cms.disk_offset != 0) {
- printk("CMS1/%8s(MDSK):", name);
+ snprintf(tmp, sizeof(tmp), "CMS1/%8s(MDSK):", name);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
/* disk is reserved minidisk */
offset = label->cms.disk_offset;
size = (label->cms.block_count - 1)
* (blocksize >> 9);
} else {
- printk("CMS1/%8s:", name);
+ snprintf(tmp, sizeof(tmp), "CMS1/%8s:", name);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
offset = (info->label_block + 1);
size = label->cms.block_count
* (blocksize >> 9);
size-offset*(blocksize >> 9));
} else {
if (strncmp(type, "LNX1", 4) == 0) {
- printk("LNX1/%8s:", name);
+ snprintf(tmp, sizeof(tmp), "LNX1/%8s:", name);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
if (label->lnx.ldl_version == 0xf2) {
fmt_size = label->lnx.formatted_blocks
* (blocksize >> 9);
offset = (info->label_block + 1);
} else {
/* unlabeled disk */
- printk("(nonl)");
+ strlcat(state->pp_buf, "(nonl)", PAGE_SIZE);
size = i_size >> 9;
offset = (info->label_block + 1);
}
* if not, something is wrong, skipping partition detection
*/
if (strncmp(type, "VOL1", 4) == 0) {
- printk("VOL1/%8s:", name);
+ snprintf(tmp, sizeof(tmp), "VOL1/%8s:", name);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
/*
* get block number and read then go through format1
* labels
}
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
goto out_freeall;
}
slot++;
}
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
put_dev_sector(sect);
return 1;
}
return false;
}
- printk (" [LDM]");
+ strlcat(pp->pp_buf, " [LDM]", PAGE_SIZE);
/* Create the data partitions */
list_for_each (item, &ldb->v_part) {
part_num++;
}
- printk ("\n");
+ strlcat(pp->pp_buf, "\n", PAGE_SIZE);
return true;
}
put_dev_sector(sect);
return 0; /* not a MacOS disk */
}
- printk(" [mac]");
+ strlcat(state->pp_buf, " [mac]", PAGE_SIZE);
blocks_in_map = be32_to_cpu(part->map_count);
for (blk = 1; blk <= blocks_in_map; ++blk) {
int pos = blk * secsize;
#endif
put_dev_sector(sect);
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
return 1;
}
put_dev_sector(sect);
return;
}
- printk(" %s%d: <solaris:", state->name, origin);
+ {
+ char tmp[1 + BDEVNAME_SIZE + 10 + 11 + 1];
+
+ snprintf(tmp, sizeof(tmp), " %s%d: <solaris:", state->name, origin);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
+ }
if (le32_to_cpu(v->v_version) != 1) {
- printk(" cannot handle version %d vtoc>\n",
- le32_to_cpu(v->v_version));
+ char tmp[64];
+
+ snprintf(tmp, sizeof(tmp), " cannot handle version %d vtoc>\n",
+ le32_to_cpu(v->v_version));
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
put_dev_sector(sect);
return;
}
max_nparts = le16_to_cpu (v->v_nparts) > 8 ? SOLARIS_X86_NUMSLICE : 8;
for (i=0; i<max_nparts && state->next<state->limit; i++) {
struct solaris_x86_slice *s = &v->v_slice[i];
+ char tmp[3 + 10 + 1 + 1];
+
if (s->s_size == 0)
continue;
- printk(" [s%d]", i);
+ snprintf(tmp, sizeof(tmp), " [s%d]", i);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
/* solaris partitions are relative to current MS-DOS
* one; must add the offset of the current partition */
put_partition(state, state->next++,
le32_to_cpu(s->s_size));
}
put_dev_sector(sect);
- printk(" >\n");
+ strlcat(state->pp_buf, " >\n", PAGE_SIZE);
#endif
}
Sector sect;
struct bsd_disklabel *l;
struct bsd_partition *p;
+ char tmp[64];
l = read_part_sector(state, offset + 1, §);
if (!l)
put_dev_sector(sect);
return;
}
- printk(" %s%d: <%s:", state->name, origin, flavour);
+
+ snprintf(tmp, sizeof(tmp), " %s%d: <%s:", state->name, origin, flavour);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
if (le16_to_cpu(l->d_npartitions) < max_partitions)
max_partitions = le16_to_cpu(l->d_npartitions);
/* full parent partition, we have it already */
continue;
if (offset > bsd_start || offset+size < bsd_start+bsd_size) {
- printk("bad subpartition - ignored\n");
+ strlcat(state->pp_buf, "bad subpartition - ignored\n", PAGE_SIZE);
continue;
}
put_partition(state, state->next++, bsd_start, bsd_size);
}
put_dev_sector(sect);
- if (le16_to_cpu(l->d_npartitions) > max_partitions)
- printk(" (ignored %d more)",
- le16_to_cpu(l->d_npartitions) - max_partitions);
- printk(" >\n");
+ if (le16_to_cpu(l->d_npartitions) > max_partitions) {
+ snprintf(tmp, sizeof(tmp), " (ignored %d more)",
+ le16_to_cpu(l->d_npartitions) - max_partitions);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
+ }
+ strlcat(state->pp_buf, " >\n", PAGE_SIZE);
}
#endif
put_dev_sector(sect);
return;
}
- printk(" %s%d: <unixware:", state->name, origin);
+ {
+ char tmp[1 + BDEVNAME_SIZE + 10 + 12 + 1];
+
+ snprintf(tmp, sizeof(tmp), " %s%d: <unixware:", state->name, origin);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
+ }
p = &l->vtoc.v_slice[1];
/* I omit the 0th slice as it is the same as whole disk. */
while (p - &l->vtoc.v_slice[0] < UNIXWARE_NUMSLICE) {
p++;
}
put_dev_sector(sect);
- printk(" >\n");
+ strlcat(state->pp_buf, " >\n", PAGE_SIZE);
#endif
}
* the normal boot sector. */
if (msdos_magic_present (data + 510) &&
SYS_IND(p) == MINIX_PARTITION) { /* subpartition table present */
+ char tmp[1 + BDEVNAME_SIZE + 10 + 9 + 1];
- printk(" %s%d: <minix:", state->name, origin);
+ snprintf(tmp, sizeof(tmp), " %s%d: <minix:", state->name, origin);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
for (i = 0; i < MINIX_NR_SUBPARTITIONS; i++, p++) {
if (state->next == state->limit)
break;
put_partition(state, state->next++,
start_sect(p), nr_sects(p));
}
- printk(" >\n");
+ strlcat(state->pp_buf, " >\n", PAGE_SIZE);
}
put_dev_sector(sect);
#endif /* CONFIG_MINIX_SUBPARTITION */
if (aix_magic_present(state, data)) {
put_dev_sector(sect);
- printk( " [AIX]");
+ strlcat(state->pp_buf, " [AIX]", PAGE_SIZE);
return 0;
}
fb = (struct fat_boot_sector *) data;
if (slot == 1 && fb->reserved && fb->fats
&& fat_valid_media(fb->media)) {
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
put_dev_sector(sect);
return 1;
} else {
n = min(size, max(sector_size, n));
put_partition(state, slot, start, n);
- printk(" <");
+ strlcat(state->pp_buf, " <", PAGE_SIZE);
parse_extended(state, start, size);
- printk(" >");
+ strlcat(state->pp_buf, " >", PAGE_SIZE);
continue;
}
put_partition(state, slot, start, size);
if (SYS_IND(p) == LINUX_RAID_PARTITION)
state->parts[slot].flags = ADDPART_FLAG_RAID;
if (SYS_IND(p) == DM6_PARTITION)
- printk("[DM]");
+ strlcat(state->pp_buf, "[DM]", PAGE_SIZE);
if (SYS_IND(p) == EZD_PARTITION)
- printk("[EZD]");
+ strlcat(state->pp_buf, "[EZD]", PAGE_SIZE);
}
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
/* second pass - output for each on a separate line */
p = (struct partition *) (0x1be + data);
le32_to_cpu(partition->p_size));
slot++;
}
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
put_dev_sector(sect);
return 1;
}
}
slot++;
}
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
put_dev_sector(sect);
return 1;
}
}
slot++;
}
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
put_dev_sector(sect);
return 1;
}
unsigned char *data;
struct dkblk0 *b;
struct slice *slice;
+ char tmp[64];
data = read_part_sector(state, 0, §);
if (!data)
return -1;
slices -= 1; /* last slice is the whole disk */
- printk("sysV68: %s(s%u)", state->name, slices);
+ snprintf(tmp, sizeof(tmp), "sysV68: %s(s%u)", state->name, slices);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
slice = (struct slice *)data;
for (i = 0; i < slices; i++, slice++) {
if (slot == state->limit)
put_partition(state, slot,
be32_to_cpu(slice->blkoff),
be32_to_cpu(slice->nblocks));
- printk("(s%u)", i);
+ snprintf(tmp, sizeof(tmp), "(s%u)", i);
+ strlcat(state->pp_buf, tmp, PAGE_SIZE);
}
slot++;
}
- printk("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
put_dev_sector(sect);
return 1;
}
label->pt_part[i].pi_blkoff,
label->pt_part[i].pi_nblocks);
put_dev_sector(sect);
- printk ("\n");
+ strlcat(state->pp_buf, "\n", PAGE_SIZE);
return 1;
} else {
put_dev_sector(sect);
return 0;
}
+/*
+ * vfsmount lock must be held for write
+ */
void change_mnt_propagation(struct vfsmount *mnt, int type)
{
if (type == MS_SHARED) {
prev_src_mnt = child;
}
out:
- spin_lock(&vfsmount_lock);
+ br_write_lock(vfsmount_lock);
while (!list_empty(&tmp_list)) {
child = list_first_entry(&tmp_list, struct vfsmount, mnt_hash);
umount_tree(child, 0, &umount_list);
}
- spin_unlock(&vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
release_mounts(&umount_list);
return ret;
}
* other mounts its parent propagates to.
* Check if any of these mounts that **do not have submounts**
* have more references than 'refcnt'. If so return busy.
+ *
+ * vfsmount lock must be held for read or write
*/
int propagate_mount_busy(struct vfsmount *mnt, int refcnt)
{
* collect all mounts that receive propagation from the mount in @list,
* and return these additional mounts in the same list.
* @list: the list of mounts to be unmounted.
+ *
+ * vfsmount lock must be held for write
*/
int propagate_umount(struct list_head *list)
{
# Makefile for the Linux proc filesystem routines.
#
-obj-$(CONFIG_PROC_FS) += proc.o
+obj-y += proc.o
proc-y := nommu.o task_nommu.o
proc-$(CONFIG_MMU) := mmu.o task_mmu.o
return count;
}
-static int get_fs_path(struct task_struct *task, struct path *path, bool root)
+static int get_task_root(struct task_struct *task, struct path *root)
{
- struct fs_struct *fs;
int result = -ENOENT;
task_lock(task);
- fs = task->fs;
- if (fs) {
- read_lock(&fs->lock);
- *path = root ? fs->root : fs->pwd;
- path_get(path);
- read_unlock(&fs->lock);
+ if (task->fs) {
+ get_fs_root(task->fs, root);
result = 0;
}
task_unlock(task);
int result = -ENOENT;
if (task) {
- result = get_fs_path(task, path, 0);
+ task_lock(task);
+ if (task->fs) {
+ get_fs_pwd(task->fs, path);
+ result = 0;
+ }
+ task_unlock(task);
put_task_struct(task);
}
return result;
int result = -ENOENT;
if (task) {
- result = get_fs_path(task, path, 1);
+ result = get_task_root(task, path);
put_task_struct(task);
}
return result;
return -EPERM;
error = inode_change_ok(inode, attr);
- if (!error)
- error = inode_setattr(inode, attr);
- return error;
+ if (error)
+ return error;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
static const struct inode_operations proc_def_inode_operations = {
get_mnt_ns(ns);
}
rcu_read_unlock();
- if (ns && get_fs_path(task, &root, 1) == 0)
+ if (ns && get_task_root(task, &root) == 0)
ret = 0;
put_task_struct(task);
}
if (!tmp)
return -ENOMEM;
- pathname = d_path(path, tmp, PAGE_SIZE);
+ pathname = d_path_with_unreachable(path, tmp, PAGE_SIZE);
len = PTR_ERR(pathname);
if (IS_ERR(pathname))
goto out;
#include <linux/time.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
+#include <linux/mm.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mount.h>
error = inode_change_ok(inode, iattr);
if (error)
- goto out;
+ return error;
- error = inode_setattr(inode, iattr);
- if (error)
- goto out;
+ if ((iattr->ia_valid & ATTR_SIZE) &&
+ iattr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, iattr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, iattr);
+ mark_inode_dirty(inode);
de->uid = inode->i_uid;
de->gid = inode->i_gid;
de->mode = inode->i_mode;
-out:
- return error;
+ return 0;
}
static int proc_getattr(struct vfsmount *mnt, struct dentry *dentry,
#include "internal.h"
-static void proc_delete_inode(struct inode *inode)
+static void proc_evict_inode(struct inode *inode)
{
struct proc_dir_entry *de;
truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
/* Stop tracking associated processes */
put_pid(PROC_I(inode)->pid);
pde_put(de);
if (PROC_I(inode)->sysctl)
sysctl_head_put(PROC_I(inode)->sysctl);
- clear_inode(inode);
}
struct vfsmount *proc_mnt;
.alloc_inode = proc_alloc_inode,
.destroy_inode = proc_destroy_inode,
.drop_inode = generic_delete_inode,
- .delete_inode = proc_delete_inode,
+ .evict_inode = proc_evict_inode,
.statfs = simple_statfs,
};
{
struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode);
long rv = -ENOTTY;
- long (*unlocked_ioctl)(struct file *, unsigned int, unsigned long);
- int (*ioctl)(struct inode *, struct file *, unsigned int, unsigned long);
+ long (*ioctl)(struct file *, unsigned int, unsigned long);
spin_lock(&pde->pde_unload_lock);
if (!pde->proc_fops) {
return rv;
}
pde->pde_users++;
- unlocked_ioctl = pde->proc_fops->unlocked_ioctl;
- ioctl = pde->proc_fops->ioctl;
+ ioctl = pde->proc_fops->unlocked_ioctl;
spin_unlock(&pde->pde_unload_lock);
- if (unlocked_ioctl) {
- rv = unlocked_ioctl(file, cmd, arg);
- if (rv == -ENOIOCTLCMD)
- rv = -EINVAL;
- } else if (ioctl) {
- WARN_ONCE(1, "Procfs ioctl handlers must use unlocked_ioctl, "
- "%pf will be called without the Bkl held\n", ioctl);
- rv = ioctl(file->f_path.dentry->d_inode, file, cmd, arg);
- }
+ if (ioctl)
+ rv = ioctl(file, cmd, arg);
pde_users_dec(pde);
return rv;
return -EPERM;
error = inode_change_ok(inode, attr);
- if (!error)
- error = inode_setattr(inode, attr);
+ if (error)
+ return error;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
- return error;
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
static int proc_sys_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
int flags = vma->vm_flags;
unsigned long ino = 0;
unsigned long long pgoff = 0;
+ unsigned long start;
dev_t dev = 0;
int len;
pgoff = ((loff_t)vma->vm_pgoff) << PAGE_SHIFT;
}
+ /* We don't show the stack guard page in /proc/maps */
+ start = vma->vm_start;
+ if (vma->vm_flags & VM_GROWSDOWN)
+ start += PAGE_SIZE;
+
seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
- vma->vm_start,
+ start,
vma->vm_end,
flags & VM_READ ? 'r' : '-',
flags & VM_WRITE ? 'w' : '-',
struct page **pagep, void **fsdata)
{
struct qnx4_inode_info *qnx4_inode = qnx4_i(mapping->host);
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
qnx4_get_block,
&qnx4_inode->mmu_private);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t qnx4_bmap(struct address_space *mapping, sector_t block)
{
spin_lock(&inode_lock);
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
continue;
#ifdef CONFIG_QUOTA_DEBUG
if (unlikely(inode_get_rsv_space(inode) > 0))
return ret;
}
- ret = simple_setsize(inode, newsize);
-
- return ret;
+ truncate_setsize(inode, newsize);
+ return 0;
}
/*****************************************************************************/
}
}
- generic_setattr(inode, ia);
+ setattr_copy(inode, ia);
out:
ia->ia_valid = old_ia_valid;
return ret;
else
ret = do_sync_read(file, buf, count, pos);
if (ret > 0) {
- fsnotify_access(file->f_path.dentry);
+ fsnotify_access(file);
add_rchar(current, ret);
}
inc_syscr(current);
else
ret = do_sync_write(file, buf, count, pos);
if (ret > 0) {
- fsnotify_modify(file->f_path.dentry);
+ fsnotify_modify(file);
add_wchar(current, ret);
}
inc_syscw(current);
kfree(iov);
if ((ret + (type == READ)) > 0) {
if (type == READ)
- fsnotify_access(file->f_path.dentry);
+ fsnotify_access(file);
else
- fsnotify_modify(file->f_path.dentry);
+ fsnotify_modify(file);
}
return ret;
}
BUG_ON(!S_ISREG(inode->i_mode));
+ if (atomic_add_unless(&REISERFS_I(inode)->openers, -1, 1))
+ return 0;
+
+ mutex_lock(&(REISERFS_I(inode)->tailpack));
+
+ if (!atomic_dec_and_test(&REISERFS_I(inode)->openers)) {
+ mutex_unlock(&(REISERFS_I(inode)->tailpack));
+ return 0;
+ }
+
/* fast out for when nothing needs to be done */
- if ((atomic_read(&inode->i_count) > 1 ||
- !(REISERFS_I(inode)->i_flags & i_pack_on_close_mask) ||
+ if ((!(REISERFS_I(inode)->i_flags & i_pack_on_close_mask) ||
!tail_has_to_be_packed(inode)) &&
REISERFS_I(inode)->i_prealloc_count <= 0) {
+ mutex_unlock(&(REISERFS_I(inode)->tailpack));
return 0;
}
- mutex_lock(&inode->i_mutex);
-
- mutex_lock(&(REISERFS_I(inode)->i_mmap));
- if (REISERFS_I(inode)->i_flags & i_ever_mapped)
- REISERFS_I(inode)->i_flags &= ~i_pack_on_close_mask;
-
reiserfs_write_lock(inode->i_sb);
/* freeing preallocation only involves relogging blocks that
* are already in the current transaction. preallocation gets
if (!err)
err = jbegin_failure;
- if (!err && atomic_read(&inode->i_count) <= 1 &&
+ if (!err &&
(REISERFS_I(inode)->i_flags & i_pack_on_close_mask) &&
tail_has_to_be_packed(inode)) {
+
/* if regular file is released by last holder and it has been
appended (we append by unformatted node only) or its direct
item(s) had to be converted, then it may have to be
err = reiserfs_truncate_file(inode, 0);
}
out:
- mutex_unlock(&(REISERFS_I(inode)->i_mmap));
- mutex_unlock(&inode->i_mutex);
reiserfs_write_unlock(inode->i_sb);
+ mutex_unlock(&(REISERFS_I(inode)->tailpack));
return err;
}
-static int reiserfs_file_mmap(struct file *file, struct vm_area_struct *vma)
+static int reiserfs_file_open(struct inode *inode, struct file *file)
{
- struct inode *inode;
-
- inode = file->f_path.dentry->d_inode;
- mutex_lock(&(REISERFS_I(inode)->i_mmap));
- REISERFS_I(inode)->i_flags |= i_ever_mapped;
- mutex_unlock(&(REISERFS_I(inode)->i_mmap));
-
- return generic_file_mmap(file, vma);
+ int err = dquot_file_open(inode, file);
+ if (!atomic_inc_not_zero(&REISERFS_I(inode)->openers)) {
+ /* somebody might be tailpacking on final close; wait for it */
+ mutex_lock(&(REISERFS_I(inode)->tailpack));
+ atomic_inc(&REISERFS_I(inode)->openers);
+ mutex_unlock(&(REISERFS_I(inode)->tailpack));
+ }
+ return err;
}
static void reiserfs_vfs_truncate_file(struct inode *inode)
{
+ mutex_lock(&(REISERFS_I(inode)->tailpack));
reiserfs_truncate_file(inode, 1);
+ mutex_unlock(&(REISERFS_I(inode)->tailpack));
}
/* Sync a reiserfs file. */
#ifdef CONFIG_COMPAT
.compat_ioctl = reiserfs_compat_ioctl,
#endif
- .mmap = reiserfs_file_mmap,
- .open = dquot_file_open,
+ .mmap = generic_file_mmap,
+ .open = reiserfs_file_open,
.release = reiserfs_file_release,
.fsync = reiserfs_sync_file,
.aio_read = generic_file_aio_read,
int reiserfs_prepare_write(struct file *f, struct page *page,
unsigned from, unsigned to);
-void reiserfs_delete_inode(struct inode *inode)
+void reiserfs_evict_inode(struct inode *inode)
{
/* We need blocks for transaction + (user+group) quota update (possibly delete) */
int jbegin_count =
int depth;
int err;
- if (!is_bad_inode(inode))
+ if (!inode->i_nlink && !is_bad_inode(inode))
dquot_initialize(inode);
truncate_inode_pages(&inode->i_data, 0);
+ if (inode->i_nlink)
+ goto no_delete;
depth = reiserfs_write_lock_once(inode->i_sb);
;
}
out:
- clear_inode(inode); /* note this must go after the journal_end to prevent deadlock */
+ end_writeback(inode); /* note this must go after the journal_end to prevent deadlock */
+ dquot_drop(inode);
inode->i_blocks = 0;
reiserfs_write_unlock_once(inode->i_sb, depth);
+ return;
+
+no_delete:
+ end_writeback(inode);
+ dquot_drop(inode);
}
static void _make_cpu_key(struct cpu_key *key, int version, __u32 dirid,
REISERFS_I(inode)->i_prealloc_count = 0;
REISERFS_I(inode)->i_trans_id = 0;
REISERFS_I(inode)->i_jl = NULL;
- mutex_init(&(REISERFS_I(inode)->i_mmap));
reiserfs_init_xattr_rwsem(inode);
if (stat_data_v1(ih)) {
REISERFS_I(inode)->i_attrs =
REISERFS_I(dir)->i_attrs & REISERFS_INHERIT_MASK;
sd_attrs_to_i_attrs(REISERFS_I(inode)->i_attrs, inode);
- mutex_init(&(REISERFS_I(inode)->i_mmap));
reiserfs_init_xattr_rwsem(inode);
/* key to search for correct place for new stat data */
old_ref = th->t_refcount;
th->t_refcount++;
}
- ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- reiserfs_get_block);
+ ret = __block_write_begin(page, pos, len, reiserfs_get_block);
if (ret && reiserfs_transaction_running(inode->i_sb)) {
struct reiserfs_transaction_handle *th = current->journal_info;
/* this gets a little ugly. If reiserfs_get_block returned an
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
+ ssize_t ret;
- return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs,
reiserfs_get_blocks_direct_io, NULL);
+
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+
+ return ret;
}
int reiserfs_setattr(struct dentry *dentry, struct iattr *attr)
int depth;
int error;
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+
/* must be turned off for recursive notify_change calls */
ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID);
goto out;
}
- error = inode_change_ok(inode, attr);
- if (!error) {
- if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
- (ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
- error = reiserfs_chown_xattrs(inode, attr);
+ if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
+ (ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
+ struct reiserfs_transaction_handle th;
+ int jbegin_count =
+ 2 *
+ (REISERFS_QUOTA_INIT_BLOCKS(inode->i_sb) +
+ REISERFS_QUOTA_DEL_BLOCKS(inode->i_sb)) +
+ 2;
- if (!error) {
- struct reiserfs_transaction_handle th;
- int jbegin_count =
- 2 *
- (REISERFS_QUOTA_INIT_BLOCKS(inode->i_sb) +
- REISERFS_QUOTA_DEL_BLOCKS(inode->i_sb)) +
- 2;
-
- /* (user+group)*(old+new) structure - we count quota info and , inode write (sb, inode) */
- error =
- journal_begin(&th, inode->i_sb,
- jbegin_count);
- if (error)
- goto out;
- error = dquot_transfer(inode, attr);
- if (error) {
- journal_end(&th, inode->i_sb,
- jbegin_count);
- goto out;
- }
- /* Update corresponding info in inode so that everything is in
- * one transaction */
- if (attr->ia_valid & ATTR_UID)
- inode->i_uid = attr->ia_uid;
- if (attr->ia_valid & ATTR_GID)
- inode->i_gid = attr->ia_gid;
- mark_inode_dirty(inode);
- error =
- journal_end(&th, inode->i_sb, jbegin_count);
- }
- }
- if (!error) {
- /*
- * Relax the lock here, as it might truncate the
- * inode pages and wait for inode pages locks.
- * To release such page lock, the owner needs the
- * reiserfs lock
- */
- reiserfs_write_unlock_once(inode->i_sb, depth);
- error = inode_setattr(inode, attr);
- depth = reiserfs_write_lock_once(inode->i_sb);
+ error = reiserfs_chown_xattrs(inode, attr);
+
+ if (error)
+ return error;
+
+ /* (user+group)*(old+new) structure - we count quota info and , inode write (sb, inode) */
+ error = journal_begin(&th, inode->i_sb, jbegin_count);
+ if (error)
+ goto out;
+ error = dquot_transfer(inode, attr);
+ if (error) {
+ journal_end(&th, inode->i_sb, jbegin_count);
+ goto out;
}
+
+ /* Update corresponding info in inode so that everything is in
+ * one transaction */
+ if (attr->ia_valid & ATTR_UID)
+ inode->i_uid = attr->ia_uid;
+ if (attr->ia_valid & ATTR_GID)
+ inode->i_gid = attr->ia_gid;
+ mark_inode_dirty(inode);
+ error = journal_end(&th, inode->i_sb, jbegin_count);
+ if (error)
+ goto out;
+ }
+
+ /*
+ * Relax the lock here, as it might truncate the
+ * inode pages and wait for inode pages locks.
+ * To release such page lock, the owner needs the
+ * reiserfs lock
+ */
+ reiserfs_write_unlock_once(inode->i_sb, depth);
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode))
+ error = vmtruncate(inode, attr->ia_size);
+
+ if (!error) {
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
}
+ depth = reiserfs_write_lock_once(inode->i_sb);
if (!error && reiserfs_posixacl(inode->i_sb)) {
if (attr->ia_valid & ATTR_MODE)
static int reiserfs_async_progress_wait(struct super_block *s)
{
- DEFINE_WAIT(wait);
struct reiserfs_journal *j = SB_JOURNAL(s);
if (atomic_read(&j->j_async_throttle)) {
/* flush out the real blocks */
for (i = 0; i < get_desc_trans_len(desc); i++) {
set_buffer_dirty(real_blocks[i]);
- ll_rw_block(SWRITE, 1, real_blocks + i);
+ write_dirty_buffer(real_blocks[i], WRITE);
}
for (i = 0; i < get_desc_trans_len(desc); i++) {
wait_on_buffer(real_blocks[i]);
kmem_cache_alloc(reiserfs_inode_cachep, GFP_KERNEL);
if (!ei)
return NULL;
+ atomic_set(&ei->openers, 0);
+ mutex_init(&ei->tailpack);
return &ei->vfs_inode;
}
reiserfs_write_unlock_once(inode->i_sb, lock_depth);
}
-static void reiserfs_clear_inode(struct inode *inode)
-{
- dquot_drop(inode);
-}
-
#ifdef CONFIG_QUOTA
static ssize_t reiserfs_quota_write(struct super_block *, int, const char *,
size_t, loff_t);
.destroy_inode = reiserfs_destroy_inode,
.write_inode = reiserfs_write_inode,
.dirty_inode = reiserfs_dirty_inode,
- .clear_inode = reiserfs_clear_inode,
- .delete_inode = reiserfs_delete_inode,
+ .evict_inode = reiserfs_evict_inode,
.put_super = reiserfs_put_super,
.write_super = reiserfs_write_super,
.sync_fs = reiserfs_sync_fs,
err |= __put_user(kinfo->si_tid, &uinfo->ssi_tid);
err |= __put_user(kinfo->si_overrun, &uinfo->ssi_overrun);
err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
+ err |= __put_user(kinfo->si_int, &uinfo->ssi_int);
break;
case __SI_POLL:
err |= __put_user(kinfo->si_band, &uinfo->ssi_band);
err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid);
err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
+ err |= __put_user(kinfo->si_int, &uinfo->ssi_int);
break;
default:
/*
#define SMB_TTL_DEFAULT 1000
-static void smb_delete_inode(struct inode *);
+static void smb_evict_inode(struct inode *);
static void smb_put_super(struct super_block *);
static int smb_statfs(struct dentry *, struct kstatfs *);
static int smb_show_options(struct seq_file *, struct vfsmount *);
.alloc_inode = smb_alloc_inode,
.destroy_inode = smb_destroy_inode,
.drop_inode = generic_delete_inode,
- .delete_inode = smb_delete_inode,
+ .evict_inode = smb_evict_inode,
.put_super = smb_put_super,
.statfs = smb_statfs,
.show_options = smb_show_options,
* All blocking cleanup operations need to go here to avoid races.
*/
static void
-smb_delete_inode(struct inode *ino)
+smb_evict_inode(struct inode *ino)
{
DEBUG1("ino=%ld\n", ino->i_ino);
truncate_inode_pages(&ino->i_data, 0);
+ end_writeback(ino);
lock_kernel();
if (smb_close(ino))
PARANOIA("could not close inode %ld\n", ino->i_ino);
unlock_kernel();
- clear_inode(ino);
}
static struct option opts[] = {
error = server->ops->truncate(inode, attr->ia_size);
if (error)
goto out;
- error = simple_setsize(inode, attr->ia_size);
- if (error)
- goto out;
+ truncate_setsize(inode, attr->ia_size);
refresh = 1;
}
* If the page isn't uptodate, we may need to start io on it
*/
if (!PageUptodate(page)) {
- /*
- * If in nonblock mode then dont block on waiting
- * for an in-flight io page
- */
- if (flags & SPLICE_F_NONBLOCK) {
- if (!trylock_page(page)) {
- error = -EAGAIN;
- break;
- }
- } else
- lock_page(page);
+ lock_page(page);
/*
* Page was truncated, or invalidated by the
struct page *pages[PIPE_DEF_BUFFERS];
struct partial_page partial[PIPE_DEF_BUFFERS];
struct iovec *vec, __vec[PIPE_DEF_BUFFERS];
- pgoff_t index;
ssize_t res;
size_t this_len;
int error;
goto shrink_ret;
}
- index = *ppos >> PAGE_CACHE_SHIFT;
offset = *ppos & ~PAGE_CACHE_MASK;
nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
help
Saying Y here includes support for SquashFS 4.0 (a Compressed
Read-Only File System). Squashfs is a highly compressed read-only
- filesystem for Linux. It uses zlib compression to compress both
+ filesystem for Linux. It uses zlib/lzo compression to compress both
files, inodes and directories. Inodes in the system are very small
and all blocks are packed to minimise data overhead. Block sizes
greater than 4K are supported up to a maximum of 1 Mbytes (default
block size 128K). SquashFS 4.0 supports 64 bit filesystems and files
(larger than 4GB), full uid/gid information, hard links and
- timestamps.
+ timestamps.
Squashfs is intended for general read-only filesystem use, for
archival use (i.e. in cases where a .tar.gz file may be used), and in
If unsure, say N.
-config SQUASHFS_XATTRS
+config SQUASHFS_XATTR
bool "Squashfs XATTR support"
depends on SQUASHFS
default n
If unsure, say N.
-config SQUASHFS_EMBEDDED
+config SQUASHFS_LZO
+ bool "Include support for LZO compressed file systems"
+ depends on SQUASHFS
+ default n
+ select LZO_DECOMPRESS
+ help
+ Saying Y here includes support for reading Squashfs file systems
+ compressed with LZO compresssion. LZO compression is mainly
+ aimed at embedded systems with slower CPUs where the overheads
+ of zlib are too high.
- bool "Additional option for memory-constrained systems"
+ LZO is not the standard compression used in Squashfs and so most
+ file systems will be readable without selecting this option.
+
+ If unsure, say N.
+
+config SQUASHFS_EMBEDDED
+ bool "Additional option for memory-constrained systems"
depends on SQUASHFS
default n
help
obj-$(CONFIG_SQUASHFS) += squashfs.o
squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
-squashfs-$(CONFIG_SQUASHFS_XATTRS) += xattr.o xattr_id.o
-
+squashfs-$(CONFIG_SQUASHFS_XATTR) += xattr.o xattr_id.o
+squashfs-$(CONFIG_SQUASHFS_LZO) += lzo_wrapper.o
NULL, NULL, NULL, LZMA_COMPRESSION, "lzma", 0
};
+#ifndef CONFIG_SQUASHFS_LZO
static const struct squashfs_decompressor squashfs_lzo_unsupported_comp_ops = {
NULL, NULL, NULL, LZO_COMPRESSION, "lzo", 0
};
+#endif
static const struct squashfs_decompressor squashfs_unknown_comp_ops = {
NULL, NULL, NULL, 0, "unknown", 0
static const struct squashfs_decompressor *decompressor[] = {
&squashfs_zlib_comp_ops,
&squashfs_lzma_unsupported_comp_ops,
+#ifdef CONFIG_SQUASHFS_LZO
+ &squashfs_lzo_comp_ops,
+#else
&squashfs_lzo_unsupported_comp_ops,
+#endif
&squashfs_unknown_comp_ops
};
--- /dev/null
+/*
+ * Squashfs - a compressed read only filesystem for Linux
+ *
+ * Copyright (c) 2010 LG Electronics
+ * Chan Jeong <chan.jeong@lge.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2,
+ * or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * lzo_wrapper.c
+ */
+
+#include <linux/mutex.h>
+#include <linux/buffer_head.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/lzo.h>
+
+#include "squashfs_fs.h"
+#include "squashfs_fs_sb.h"
+#include "squashfs_fs_i.h"
+#include "squashfs.h"
+#include "decompressor.h"
+
+struct squashfs_lzo {
+ void *input;
+ void *output;
+};
+
+static void *lzo_init(struct squashfs_sb_info *msblk)
+{
+ int block_size = max_t(int, msblk->block_size, SQUASHFS_METADATA_SIZE);
+
+ struct squashfs_lzo *stream = kzalloc(sizeof(*stream), GFP_KERNEL);
+ if (stream == NULL)
+ goto failed;
+ stream->input = vmalloc(block_size);
+ if (stream->input == NULL)
+ goto failed;
+ stream->output = vmalloc(block_size);
+ if (stream->output == NULL)
+ goto failed2;
+
+ return stream;
+
+failed2:
+ vfree(stream->input);
+failed:
+ ERROR("Failed to allocate lzo workspace\n");
+ kfree(stream);
+ return NULL;
+}
+
+
+static void lzo_free(void *strm)
+{
+ struct squashfs_lzo *stream = strm;
+
+ if (stream) {
+ vfree(stream->input);
+ vfree(stream->output);
+ }
+ kfree(stream);
+}
+
+
+static int lzo_uncompress(struct squashfs_sb_info *msblk, void **buffer,
+ struct buffer_head **bh, int b, int offset, int length, int srclength,
+ int pages)
+{
+ struct squashfs_lzo *stream = msblk->stream;
+ void *buff = stream->input;
+ int avail, i, bytes = length, res;
+ size_t out_len = srclength;
+
+ mutex_lock(&msblk->read_data_mutex);
+
+ for (i = 0; i < b; i++) {
+ wait_on_buffer(bh[i]);
+ if (!buffer_uptodate(bh[i]))
+ goto block_release;
+
+ avail = min(bytes, msblk->devblksize - offset);
+ memcpy(buff, bh[i]->b_data + offset, avail);
+ buff += avail;
+ bytes -= avail;
+ offset = 0;
+ put_bh(bh[i]);
+ }
+
+ res = lzo1x_decompress_safe(stream->input, (size_t)length,
+ stream->output, &out_len);
+ if (res != LZO_E_OK)
+ goto failed;
+
+ res = bytes = (int)out_len;
+ for (i = 0, buff = stream->output; bytes && i < pages; i++) {
+ avail = min_t(int, bytes, PAGE_CACHE_SIZE);
+ memcpy(buffer[i], buff, avail);
+ buff += avail;
+ bytes -= avail;
+ }
+
+ mutex_unlock(&msblk->read_data_mutex);
+ return res;
+
+block_release:
+ for (; i < b; i++)
+ put_bh(bh[i]);
+
+failed:
+ mutex_unlock(&msblk->read_data_mutex);
+
+ ERROR("lzo decompression failed, data probably corrupt\n");
+ return -EIO;
+}
+
+const struct squashfs_decompressor squashfs_lzo_comp_ops = {
+ .init = lzo_init,
+ .free = lzo_free,
+ .decompress = lzo_uncompress,
+ .id = LZO_COMPRESSION,
+ .name = "lzo",
+ .supported = 1
+};
/* zlib_wrapper.c */
extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
+
+/* lzo_wrapper.c */
+extern const struct squashfs_decompressor squashfs_lzo_comp_ops;
__le16 uid;
__le16 guid;
__le32 mtime;
- __le32 inode_number;
+ __le32 inode_number;
};
struct squashfs_ipc_inode {
__le16 uid;
__le16 guid;
__le32 mtime;
- __le32 inode_number;
+ __le32 inode_number;
__le32 nlink;
};
__le16 uid;
__le16 guid;
__le32 mtime;
- __le32 inode_number;
+ __le32 inode_number;
__le32 nlink;
__le32 xattr;
};
__le16 uid;
__le16 guid;
__le32 mtime;
- __le32 inode_number;
+ __le32 inode_number;
__le32 nlink;
__le32 rdev;
};
__le16 uid;
__le16 guid;
__le32 mtime;
- __le32 inode_number;
+ __le32 inode_number;
__le32 nlink;
__le32 rdev;
__le32 xattr;
__le16 uid;
__le16 guid;
__le32 mtime;
- __le32 inode_number;
+ __le32 inode_number;
__le32 nlink;
__le32 symlink_size;
char symlink[0];
__le16 uid;
__le16 guid;
__le32 mtime;
- __le32 inode_number;
+ __le32 inode_number;
__le32 start_block;
__le32 fragment;
__le32 offset;
__le16 uid;
__le16 guid;
__le32 mtime;
- __le32 inode_number;
+ __le32 inode_number;
__le64 start_block;
__le64 file_size;
__le64 sparse;
__le16 uid;
__le16 guid;
__le32 mtime;
- __le32 inode_number;
+ __le32 inode_number;
__le32 start_block;
__le32 nlink;
__le16 file_size;
__le16 uid;
__le16 guid;
__le32 mtime;
- __le32 inode_number;
+ __le32 inode_number;
__le32 nlink;
__le32 file_size;
__le32 start_block;
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
- * xattr_id.c
+ * xattr.c
*/
#include <linux/init.h>
.get = squashfs_security_get
};
-static inline const struct xattr_handler *squashfs_xattr_handler(int type)
+static const struct xattr_handler *squashfs_xattr_handler(int type)
{
if (type & ~(SQUASHFS_XATTR_PREFIX_MASK | SQUASHFS_XATTR_VALUE_OOL))
/* ignore unrecognised type */
* xattr.h
*/
-#ifdef CONFIG_SQUASHFS_XATTRS
+#ifdef CONFIG_SQUASHFS_XATTR
extern __le64 *squashfs_read_xattr_id_table(struct super_block *, u64,
u64 *, int *);
extern int squashfs_xattr_lookup(struct super_block *, unsigned int, int *,
}
EXPORT_SYMBOL(vfs_fstat);
-int vfs_fstatat(int dfd, char __user *filename, struct kstat *stat, int flag)
+int vfs_fstatat(int dfd, const char __user *filename, struct kstat *stat,
+ int flag)
{
struct path path;
int error = -EINVAL;
}
EXPORT_SYMBOL(vfs_fstatat);
-int vfs_stat(char __user *name, struct kstat *stat)
+int vfs_stat(const char __user *name, struct kstat *stat)
{
return vfs_fstatat(AT_FDCWD, name, stat, 0);
}
EXPORT_SYMBOL(vfs_stat);
-int vfs_lstat(char __user *name, struct kstat *stat)
+int vfs_lstat(const char __user *name, struct kstat *stat)
{
return vfs_fstatat(AT_FDCWD, name, stat, AT_SYMLINK_NOFOLLOW);
}
return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
}
-SYSCALL_DEFINE2(stat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
+SYSCALL_DEFINE2(stat, const char __user *, filename,
+ struct __old_kernel_stat __user *, statbuf)
{
struct kstat stat;
int error;
return cp_old_stat(&stat, statbuf);
}
-SYSCALL_DEFINE2(lstat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
+SYSCALL_DEFINE2(lstat, const char __user *, filename,
+ struct __old_kernel_stat __user *, statbuf)
{
struct kstat stat;
int error;
return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
}
-SYSCALL_DEFINE2(newstat, char __user *, filename, struct stat __user *, statbuf)
+SYSCALL_DEFINE2(newstat, const char __user *, filename,
+ struct stat __user *, statbuf)
{
struct kstat stat;
int error = vfs_stat(filename, &stat);
return cp_new_stat(&stat, statbuf);
}
-SYSCALL_DEFINE2(newlstat, char __user *, filename, struct stat __user *, statbuf)
+SYSCALL_DEFINE2(newlstat, const char __user *, filename,
+ struct stat __user *, statbuf)
{
struct kstat stat;
int error;
}
#if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
-SYSCALL_DEFINE4(newfstatat, int, dfd, char __user *, filename,
+SYSCALL_DEFINE4(newfstatat, int, dfd, const char __user *, filename,
struct stat __user *, statbuf, int, flag)
{
struct kstat stat;
return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
}
-SYSCALL_DEFINE2(stat64, char __user *, filename, struct stat64 __user *, statbuf)
+SYSCALL_DEFINE2(stat64, const char __user *, filename,
+ struct stat64 __user *, statbuf)
{
struct kstat stat;
int error = vfs_stat(filename, &stat);
return error;
}
-SYSCALL_DEFINE2(lstat64, char __user *, filename, struct stat64 __user *, statbuf)
+SYSCALL_DEFINE2(lstat64, const char __user *, filename,
+ struct stat64 __user *, statbuf)
{
struct kstat stat;
int error = vfs_lstat(filename, &stat);
return error;
}
-SYSCALL_DEFINE4(fstatat64, int, dfd, char __user *, filename,
+SYSCALL_DEFINE4(fstatat64, int, dfd, const char __user *, filename,
struct stat64 __user *, statbuf, int, flag)
{
struct kstat stat;
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/file.h>
+#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/statfs.h>
#include <linux/security.h>
#include <linux/uaccess.h>
-int vfs_statfs(struct dentry *dentry, struct kstatfs *buf)
+static int flags_by_mnt(int mnt_flags)
{
- int retval = -ENODEV;
-
- if (dentry) {
- retval = -ENOSYS;
- if (dentry->d_sb->s_op->statfs) {
- memset(buf, 0, sizeof(*buf));
- retval = security_sb_statfs(dentry);
- if (retval)
- return retval;
- retval = dentry->d_sb->s_op->statfs(dentry, buf);
- if (retval == 0 && buf->f_frsize == 0)
- buf->f_frsize = buf->f_bsize;
- }
- }
+ int flags = 0;
+
+ if (mnt_flags & MNT_READONLY)
+ flags |= ST_RDONLY;
+ if (mnt_flags & MNT_NOSUID)
+ flags |= ST_NOSUID;
+ if (mnt_flags & MNT_NODEV)
+ flags |= ST_NODEV;
+ if (mnt_flags & MNT_NOEXEC)
+ flags |= ST_NOEXEC;
+ if (mnt_flags & MNT_NOATIME)
+ flags |= ST_NOATIME;
+ if (mnt_flags & MNT_NODIRATIME)
+ flags |= ST_NODIRATIME;
+ if (mnt_flags & MNT_RELATIME)
+ flags |= ST_RELATIME;
+ return flags;
+}
+
+static int flags_by_sb(int s_flags)
+{
+ int flags = 0;
+ if (s_flags & MS_SYNCHRONOUS)
+ flags |= ST_SYNCHRONOUS;
+ if (s_flags & MS_MANDLOCK)
+ flags |= ST_MANDLOCK;
+ return flags;
+}
+
+static int calculate_f_flags(struct vfsmount *mnt)
+{
+ return ST_VALID | flags_by_mnt(mnt->mnt_flags) |
+ flags_by_sb(mnt->mnt_sb->s_flags);
+}
+
+int statfs_by_dentry(struct dentry *dentry, struct kstatfs *buf)
+{
+ int retval;
+
+ if (!dentry->d_sb->s_op->statfs)
+ return -ENOSYS;
+
+ memset(buf, 0, sizeof(*buf));
+ retval = security_sb_statfs(dentry);
+ if (retval)
+ return retval;
+ retval = dentry->d_sb->s_op->statfs(dentry, buf);
+ if (retval == 0 && buf->f_frsize == 0)
+ buf->f_frsize = buf->f_bsize;
return retval;
}
+int vfs_statfs(struct path *path, struct kstatfs *buf)
+{
+ int error;
+
+ error = statfs_by_dentry(path->dentry, buf);
+ if (!error)
+ buf->f_flags = calculate_f_flags(path->mnt);
+ return error;
+}
EXPORT_SYMBOL(vfs_statfs);
-static int vfs_statfs_native(struct dentry *dentry, struct statfs *buf)
+static int do_statfs_native(struct path *path, struct statfs *buf)
{
struct kstatfs st;
int retval;
- retval = vfs_statfs(dentry, &st);
+ retval = vfs_statfs(path, &st);
if (retval)
return retval;
buf->f_fsid = st.f_fsid;
buf->f_namelen = st.f_namelen;
buf->f_frsize = st.f_frsize;
+ buf->f_flags = st.f_flags;
memset(buf->f_spare, 0, sizeof(buf->f_spare));
}
return 0;
}
-static int vfs_statfs64(struct dentry *dentry, struct statfs64 *buf)
+static int do_statfs64(struct path *path, struct statfs64 *buf)
{
struct kstatfs st;
int retval;
- retval = vfs_statfs(dentry, &st);
+ retval = vfs_statfs(path, &st);
if (retval)
return retval;
buf->f_fsid = st.f_fsid;
buf->f_namelen = st.f_namelen;
buf->f_frsize = st.f_frsize;
+ buf->f_flags = st.f_flags;
memset(buf->f_spare, 0, sizeof(buf->f_spare));
}
return 0;
error = user_path(pathname, &path);
if (!error) {
struct statfs tmp;
- error = vfs_statfs_native(path.dentry, &tmp);
+ error = do_statfs_native(&path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
path_put(&path);
error = user_path(pathname, &path);
if (!error) {
struct statfs64 tmp;
- error = vfs_statfs64(path.dentry, &tmp);
+ error = do_statfs64(&path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
path_put(&path);
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs_native(file->f_path.dentry, &tmp);
+ error = do_statfs_native(&file->f_path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
fput(file);
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs64(file->f_path.dentry, &tmp);
+ error = do_statfs64(&file->f_path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
fput(file);
if (!s)
return -EINVAL;
- err = vfs_statfs(s->s_root, &sbuf);
+ err = statfs_by_dentry(s->s_root, &sbuf);
drop_super(s);
if (err)
return err;
s = NULL;
goto out;
}
+#ifdef CONFIG_SMP
+ s->s_files = alloc_percpu(struct list_head);
+ if (!s->s_files) {
+ security_sb_free(s);
+ kfree(s);
+ s = NULL;
+ goto out;
+ } else {
+ int i;
+
+ for_each_possible_cpu(i)
+ INIT_LIST_HEAD(per_cpu_ptr(s->s_files, i));
+ }
+#else
INIT_LIST_HEAD(&s->s_files);
+#endif
INIT_LIST_HEAD(&s->s_instances);
INIT_HLIST_HEAD(&s->s_anon);
INIT_LIST_HEAD(&s->s_inodes);
*/
static inline void destroy_super(struct super_block *s)
{
+#ifdef CONFIG_SMP
+ free_percpu(s->s_files);
+#endif
security_sb_free(s);
kfree(s->s_subtype);
kfree(s->s_options);
if (s) {
up_write(&s->s_umount);
destroy_super(s);
+ s = NULL;
}
down_write(&old->s_umount);
+ if (unlikely(!(old->s_flags & MS_BORN))) {
+ deactivate_locked_super(old);
+ goto retry;
+ }
return old;
}
}
*/
void sync_supers(void)
{
- struct super_block *sb, *n;
+ struct super_block *sb, *p = NULL;
spin_lock(&sb_lock);
- list_for_each_entry_safe(sb, n, &super_blocks, s_list) {
+ list_for_each_entry(sb, &super_blocks, s_list) {
if (list_empty(&sb->s_instances))
continue;
if (sb->s_op->write_super && sb->s_dirt) {
up_read(&sb->s_umount);
spin_lock(&sb_lock);
- /* lock was dropped, must reset next */
- list_safe_reset_next(sb, n, s_list);
- __put_super(sb);
+ if (p)
+ __put_super(p);
+ p = sb;
}
}
+ if (p)
+ __put_super(p);
spin_unlock(&sb_lock);
}
*/
void iterate_supers(void (*f)(struct super_block *, void *), void *arg)
{
- struct super_block *sb, *n;
+ struct super_block *sb, *p = NULL;
spin_lock(&sb_lock);
- list_for_each_entry_safe(sb, n, &super_blocks, s_list) {
+ list_for_each_entry(sb, &super_blocks, s_list) {
if (list_empty(&sb->s_instances))
continue;
sb->s_count++;
up_read(&sb->s_umount);
spin_lock(&sb_lock);
- /* lock was dropped, must reset next */
- list_safe_reset_next(sb, n, s_list);
- __put_super(sb);
+ if (p)
+ __put_super(p);
+ p = sb;
}
+ if (p)
+ __put_super(p);
spin_unlock(&sb_lock);
}
static void do_emergency_remount(struct work_struct *work)
{
- struct super_block *sb, *n;
+ struct super_block *sb, *p = NULL;
spin_lock(&sb_lock);
- list_for_each_entry_safe(sb, n, &super_blocks, s_list) {
+ list_for_each_entry(sb, &super_blocks, s_list) {
if (list_empty(&sb->s_instances))
continue;
sb->s_count++;
}
up_write(&sb->s_umount);
spin_lock(&sb_lock);
- /* lock was dropped, must reset next */
- list_safe_reset_next(sb, n, s_list);
- __put_super(sb);
+ if (p)
+ __put_super(p);
+ p = sb;
}
+ if (p)
+ __put_super(p);
spin_unlock(&sb_lock);
kfree(work);
printk("Emergency Remount complete\n");
goto error_bdev;
}
+ /*
+ * s_umount nests inside bd_mutex during
+ * __invalidate_device(). close_bdev_exclusive()
+ * acquires bd_mutex and can't be called under
+ * s_umount. Drop s_umount temporarily. This is safe
+ * as we're holding an active reference.
+ */
+ up_write(&s->s_umount);
close_bdev_exclusive(bdev, mode);
+ down_write(&s->s_umount);
} else {
char b[BDEVNAME_SIZE];
goto out_free_secdata;
BUG_ON(!mnt->mnt_sb);
WARN_ON(!mnt->mnt_sb->s_bdi);
+ mnt->mnt_sb->s_flags |= MS_BORN;
error = security_sb_kern_mount(mnt->mnt_sb, flags, secdata);
if (error)
}
}
-/*
- * Generic function to fsync a file.
- */
-int file_fsync(struct file *filp, int datasync)
-{
- struct inode *inode = filp->f_mapping->host;
- struct super_block * sb;
- int ret, err;
-
- /* sync the inode to buffers */
- ret = write_inode_now(inode, 0);
-
- /* sync the superblock to buffers */
- sb = inode->i_sb;
- if (sb->s_dirt && sb->s_op->write_super)
- sb->s_op->write_super(sb);
-
- /* .. finally sync the buffers to disk */
- err = sync_blockdev(sb->s_bdev);
- if (!ret)
- ret = err;
- return ret;
-}
-EXPORT_SYMBOL(file_fsync);
-
/**
* vfs_fsync_range - helper to sync a range of data & metadata to disk
* @file: file to sync
goto out;
/* this ignores size changes */
- generic_setattr(inode, iattr);
+ setattr_copy(inode, iattr);
out:
mutex_unlock(&sysfs_mutex);
* The sysfs_dirent serves as both an inode and a directory entry for sysfs.
* To prevent the sysfs inode numbers from being freed prematurely we take a
* reference to sysfs_dirent from the sysfs inode. A
- * super_operations.delete_inode() implementation is needed to drop that
+ * super_operations.evict_inode() implementation is needed to drop that
* reference upon inode destruction.
*/
-void sysfs_delete_inode(struct inode *inode)
+void sysfs_evict_inode(struct inode *inode)
{
struct sysfs_dirent *sd = inode->i_private;
truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ end_writeback(inode);
sysfs_put(sd);
}
static const struct super_operations sysfs_ops = {
.statfs = simple_statfs,
.drop_inode = generic_delete_inode,
- .delete_inode = sysfs_delete_inode,
+ .evict_inode = sysfs_evict_inode,
};
struct sysfs_dirent sysfs_root = {
* inode.c
*/
struct inode *sysfs_get_inode(struct super_block *sb, struct sysfs_dirent *sd);
-void sysfs_delete_inode(struct inode *inode);
+void sysfs_evict_inode(struct inode *inode);
int sysfs_sd_setattr(struct sysfs_dirent *sd, struct iattr *iattr);
int sysfs_permission(struct inode *inode, int mask);
int sysfs_setattr(struct dentry *dentry, struct iattr *iattr);
pos = page_offset(page) +
(char*)de - (char*)page_address(page);
lock_page(page);
- err = __sysv_write_begin(NULL, page->mapping, pos, SYSV_DIRSIZE,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = sysv_prepare_chunk(page, pos, SYSV_DIRSIZE);
if (err)
goto out_unlock;
memcpy (de->name, name, namelen);
int sysv_delete_entry(struct sysv_dir_entry *de, struct page *page)
{
- struct address_space *mapping = page->mapping;
- struct inode *inode = (struct inode*)mapping->host;
+ struct inode *inode = page->mapping->host;
char *kaddr = (char*)page_address(page);
loff_t pos = page_offset(page) + (char *)de - kaddr;
int err;
lock_page(page);
- err = __sysv_write_begin(NULL, mapping, pos, SYSV_DIRSIZE,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = sysv_prepare_chunk(page, pos, SYSV_DIRSIZE);
BUG_ON(err);
de->inode = 0;
err = dir_commit_chunk(page, pos, SYSV_DIRSIZE);
int sysv_make_empty(struct inode *inode, struct inode *dir)
{
- struct address_space *mapping = inode->i_mapping;
- struct page *page = grab_cache_page(mapping, 0);
+ struct page *page = grab_cache_page(inode->i_mapping, 0);
struct sysv_dir_entry * de;
char *base;
int err;
if (!page)
return -ENOMEM;
- err = __sysv_write_begin(NULL, mapping, 0, 2 * SYSV_DIRSIZE,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = sysv_prepare_chunk(page, 0, 2 * SYSV_DIRSIZE);
if (err) {
unlock_page(page);
goto fail;
void sysv_set_link(struct sysv_dir_entry *de, struct page *page,
struct inode *inode)
{
- struct address_space *mapping = page->mapping;
- struct inode *dir = mapping->host;
+ struct inode *dir = page->mapping->host;
loff_t pos = page_offset(page) +
(char *)de-(char*)page_address(page);
int err;
lock_page(page);
- err = __sysv_write_begin(NULL, mapping, pos, SYSV_DIRSIZE,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = sysv_prepare_chunk(page, pos, SYSV_DIRSIZE);
BUG_ON(err);
de->inode = cpu_to_fs16(SYSV_SB(inode->i_sb), inode->i_ino);
err = dir_commit_chunk(page, pos, SYSV_DIRSIZE);
.splice_read = generic_file_splice_read,
};
+static int sysv_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
+}
+
const struct inode_operations sysv_file_inode_operations = {
.truncate = sysv_truncate,
+ .setattr = sysv_setattr,
.getattr = sysv_getattr,
};
return;
}
raw_inode = sysv_raw_inode(sb, ino, &bh);
- clear_inode(inode);
if (!raw_inode) {
printk("sysv_free_inode: unable to read inode block on device "
"%s\n", inode->i_sb->s_id);
lock_super(sb);
if (sbi->s_forced_ro)
*flags |= MS_RDONLY;
- if (!(*flags & MS_RDONLY))
- sb->s_dirt = 1;
+ if (*flags & MS_RDONLY)
+ sysv_write_super(sb);
unlock_super(sb);
return 0;
}
return __sysv_write_inode(inode, 1);
}
-static void sysv_delete_inode(struct inode *inode)
+static void sysv_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
- inode->i_size = 0;
- sysv_truncate(inode);
- sysv_free_inode(inode);
+ if (!inode->i_nlink) {
+ inode->i_size = 0;
+ sysv_truncate(inode);
+ }
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
+ if (!inode->i_nlink)
+ sysv_free_inode(inode);
}
static struct kmem_cache *sysv_inode_cachep;
.alloc_inode = sysv_alloc_inode,
.destroy_inode = sysv_destroy_inode,
.write_inode = sysv_write_inode,
- .delete_inode = sysv_delete_inode,
+ .evict_inode = sysv_evict_inode,
.put_super = sysv_put_super,
.write_super = sysv_write_super,
.sync_fs = sysv_sync_fs,
return block_read_full_page(page,get_block);
}
-int __sysv_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata)
+int sysv_prepare_chunk(struct page *page, loff_t pos, unsigned len)
{
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- get_block);
+ return __block_write_begin(page, pos, len, get_block);
}
static int sysv_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return __sysv_write_begin(file, mapping, pos, len, flags, pagep, fsdata);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep, get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t sysv_bmap(struct address_space *mapping, sector_t block)
sb->s_flags |= MS_RDONLY;
if (sbi->s_truncate)
sb->s_root->d_op = &sysv_dentry_operations;
- sb->s_dirt = 1;
return 1;
}
goto failed;
}
-static int v7_fill_super(struct super_block *sb, void *data, int silent)
+static int v7_sanity_check(struct super_block *sb, struct buffer_head *bh)
{
- struct sysv_sb_info *sbi;
- struct buffer_head *bh, *bh2 = NULL;
struct v7_super_block *v7sb;
struct sysv_inode *v7i;
+ struct buffer_head *bh2;
+ struct sysv_sb_info *sbi;
+
+ sbi = sb->s_fs_info;
+
+ /* plausibility check on superblock */
+ v7sb = (struct v7_super_block *) bh->b_data;
+ if (fs16_to_cpu(sbi, v7sb->s_nfree) > V7_NICFREE ||
+ fs16_to_cpu(sbi, v7sb->s_ninode) > V7_NICINOD ||
+ fs32_to_cpu(sbi, v7sb->s_fsize) > V7_MAXSIZE)
+ return 0;
+
+ /* plausibility check on root inode: it is a directory,
+ with a nonzero size that is a multiple of 16 */
+ bh2 = sb_bread(sb, 2);
+ if (bh2 == NULL)
+ return 0;
+
+ v7i = (struct sysv_inode *)(bh2->b_data + 64);
+ if ((fs16_to_cpu(sbi, v7i->i_mode) & ~0777) != S_IFDIR ||
+ (fs32_to_cpu(sbi, v7i->i_size) == 0) ||
+ (fs32_to_cpu(sbi, v7i->i_size) & 017) ||
+ (fs32_to_cpu(sbi, v7i->i_size) > V7_NFILES *
+ sizeof(struct sysv_dir_entry))) {
+ brelse(bh2);
+ return 0;
+ }
+
+ brelse(bh2);
+ return 1;
+}
+
+static int v7_fill_super(struct super_block *sb, void *data, int silent)
+{
+ struct sysv_sb_info *sbi;
+ struct buffer_head *bh;
if (440 != sizeof (struct v7_super_block))
panic("V7 FS: bad super-block size");
sbi->s_sb = sb;
sbi->s_block_base = 0;
sbi->s_type = FSTYPE_V7;
- sbi->s_bytesex = BYTESEX_PDP;
sb->s_fs_info = sbi;
sb_set_blocksize(sb, 512);
goto failed;
}
- /* plausibility check on superblock */
- v7sb = (struct v7_super_block *) bh->b_data;
- if (fs16_to_cpu(sbi, v7sb->s_nfree) > V7_NICFREE ||
- fs16_to_cpu(sbi, v7sb->s_ninode) > V7_NICINOD ||
- fs32_to_cpu(sbi, v7sb->s_time) == 0)
- goto failed;
+ /* Try PDP-11 UNIX */
+ sbi->s_bytesex = BYTESEX_PDP;
+ if (v7_sanity_check(sb, bh))
+ goto detected;
- /* plausibility check on root inode: it is a directory,
- with a nonzero size that is a multiple of 16 */
- if ((bh2 = sb_bread(sb, 2)) == NULL)
- goto failed;
- v7i = (struct sysv_inode *)(bh2->b_data + 64);
- if ((fs16_to_cpu(sbi, v7i->i_mode) & ~0777) != S_IFDIR ||
- (fs32_to_cpu(sbi, v7i->i_size) == 0) ||
- (fs32_to_cpu(sbi, v7i->i_size) & 017) != 0)
- goto failed;
- brelse(bh2);
- bh2 = NULL;
+ /* Try PC/IX, v7/x86 */
+ sbi->s_bytesex = BYTESEX_LE;
+ if (v7_sanity_check(sb, bh))
+ goto detected;
+ goto failed;
+
+detected:
sbi->s_bh1 = bh;
sbi->s_bh2 = bh;
if (complete_read_super(sb, silent, 1))
return 0;
failed:
- brelse(bh2);
+ printk(KERN_ERR "VFS: could not find a valid V7 on %s.\n",
+ sb->s_id);
brelse(bh);
kfree(sbi);
return -EINVAL;
module_init(init_sysv_fs)
module_exit(exit_sysv_fs)
+MODULE_ALIAS("v7");
MODULE_LICENSE("GPL");
/* itree.c */
extern void sysv_truncate(struct inode *);
-extern int __sysv_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata);
+extern int sysv_prepare_chunk(struct page *page, loff_t pos, unsigned len);
/* inode.c */
extern struct inode *sysv_iget(struct super_block *, unsigned int);
* the page locked, and it locks @ui_mutex. However, write-back does take inode
* @i_mutex, which means other VFS operations may be run on this inode at the
* same time. And the problematic one is truncation to smaller size, from where
- * we have to call 'simple_setsize()', which first changes @inode->i_size, then
+ * we have to call 'truncate_setsize()', which first changes @inode->i_size, then
* drops the truncated pages. And while dropping the pages, it takes the page
- * lock. This means that 'do_truncation()' cannot call 'simple_setsize()' with
+ * lock. This means that 'do_truncation()' cannot call 'truncate_setsize()' with
* @ui_mutex locked, because it would deadlock with 'ubifs_writepage()'. This
* means that @inode->i_size is changed while @ui_mutex is unlocked.
*
- * XXX: with the new truncate the above is not true anymore, the simple_setsize
- * calls can be replaced with the individual components.
+ * XXX(truncate): with the new truncate sequence this is not true anymore,
+ * and the calls to truncate_setsize can be move around freely. They should
+ * be moved to the very end of the truncate sequence.
*
* But in 'ubifs_writepage()' we have to guarantee that we do not write beyond
* inode size. How do we do this if @inode->i_size may became smaller while we
budgeted = 0;
}
- err = simple_setsize(inode, new_size);
- if (err)
- goto out_budg;
+ truncate_setsize(inode, new_size);
if (offset) {
pgoff_t index = new_size >> PAGE_CACHE_SHIFT;
if (attr->ia_valid & ATTR_SIZE) {
dbg_gen("size %lld -> %lld", inode->i_size, new_size);
- err = simple_setsize(inode, new_size);
- if (err)
- goto out;
+ truncate_setsize(inode, new_size);
}
mutex_lock(&ui->ui_mutex);
if (attr->ia_valid & ATTR_SIZE) {
/* Truncation changes inode [mc]time */
inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
- /* 'simple_setsize()' changed @i_size, update @ui_size */
+ /* 'truncate_setsize()' changed @i_size, update @ui_size */
ui->ui_size = inode->i_size;
}
if (IS_SYNC(inode))
err = inode->i_sb->s_op->write_inode(inode, NULL);
return err;
-
-out:
- ubifs_release_budget(c, &req);
- return err;
}
int ubifs_setattr(struct dentry *dentry, struct iattr *attr)
return err;
}
-static void ubifs_delete_inode(struct inode *inode)
+static void ubifs_evict_inode(struct inode *inode)
{
int err;
struct ubifs_info *c = inode->i_sb->s_fs_info;
dbg_gen("inode %lu, mode %#x", inode->i_ino, (int)inode->i_mode);
ubifs_assert(!atomic_read(&inode->i_count));
- ubifs_assert(inode->i_nlink == 0);
truncate_inode_pages(&inode->i_data, 0);
+
+ if (inode->i_nlink)
+ goto done;
+
if (is_bad_inode(inode))
goto out;
c->nospace = c->nospace_rp = 0;
smp_wmb();
}
- clear_inode(inode);
+done:
+ end_writeback(inode);
}
static void ubifs_dirty_inode(struct inode *inode)
.destroy_inode = ubifs_destroy_inode,
.put_super = ubifs_put_super,
.write_inode = ubifs_write_inode,
- .delete_inode = ubifs_delete_inode,
+ .evict_inode = ubifs_evict_inode,
.statfs = ubifs_statfs,
.dirty_inode = ubifs_dirty_inode,
.remount_fs = ubifs_remount_fs,
* The @ui_size is a "shadow" variable for @inode->i_size and UBIFS uses
* @ui_size instead of @inode->i_size. The reason for this is that UBIFS cannot
* make sure @inode->i_size is always changed under @ui_mutex, because it
- * cannot call 'simple_setsize()' with @ui_mutex locked, because it would deadlock
+ * cannot call 'truncate_setsize()' with @ui_mutex locked, because it would deadlock
* with 'ubifs_writepage()' (see file.c). All the other inode fields are
* changed under @ui_mutex, so they do not need "shadow" fields. Note, one
* could consider to rework locking and base it on "shadow" fields.
.llseek = generic_file_llseek,
};
+static int udf_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
+}
+
const struct inode_operations udf_file_inode_operations = {
+ .setattr = udf_setattr,
.truncate = udf_truncate,
};
struct super_block *sb = inode->i_sb;
struct udf_sb_info *sbi = UDF_SB(sb);
- clear_inode(inode);
-
mutex_lock(&sbi->s_alloc_mutex);
if (sbi->s_lvid_bh) {
struct logicalVolIntegrityDescImpUse *lvidiu =
static int udf_get_block(struct inode *, sector_t, struct buffer_head *, int);
-void udf_delete_inode(struct inode *inode)
-{
- truncate_inode_pages(&inode->i_data, 0);
-
- if (is_bad_inode(inode))
- goto no_delete;
-
- inode->i_size = 0;
- udf_truncate(inode);
- lock_kernel();
-
- udf_update_inode(inode, IS_SYNC(inode));
- udf_free_inode(inode);
-
- unlock_kernel();
- return;
-
-no_delete:
- clear_inode(inode);
-}
-
-/*
- * If we are going to release inode from memory, we truncate last inode extent
- * to proper length. We could use drop_inode() but it's called under inode_lock
- * and thus we cannot mark inode dirty there. We use clear_inode() but we have
- * to make sure to write inode as it's not written automatically.
- */
-void udf_clear_inode(struct inode *inode)
+void udf_evict_inode(struct inode *inode)
{
struct udf_inode_info *iinfo = UDF_I(inode);
+ int want_delete = 0;
+
+ truncate_inode_pages(&inode->i_data, 0);
+ if (!inode->i_nlink && !is_bad_inode(inode)) {
+ want_delete = 1;
+ inode->i_size = 0;
+ udf_truncate(inode);
+ lock_kernel();
+ udf_update_inode(inode, IS_SYNC(inode));
+ unlock_kernel();
+ }
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
inode->i_size != iinfo->i_lenExtents) {
printk(KERN_WARNING "UDF-fs (%s): Inode %lu (mode %o) has "
(unsigned long long)inode->i_size,
(unsigned long long)iinfo->i_lenExtents);
}
-
kfree(iinfo->i_ext.i_data);
iinfo->i_ext.i_data = NULL;
+ if (want_delete) {
+ lock_kernel();
+ udf_free_inode(inode);
+ unlock_kernel();
+ }
}
static int udf_writepage(struct page *page, struct writeback_control *wbc)
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- udf_get_block);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep, udf_get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t udf_bmap(struct address_space *mapping, sector_t block)
.alloc_inode = udf_alloc_inode,
.destroy_inode = udf_destroy_inode,
.write_inode = udf_write_inode,
- .delete_inode = udf_delete_inode,
- .clear_inode = udf_clear_inode,
+ .evict_inode = udf_evict_inode,
.put_super = udf_put_super,
.sync_fs = udf_sync_fs,
.statfs = udf_statfs,
extern struct buffer_head *udf_bread(struct inode *, int, int, int *);
extern void udf_truncate(struct inode *);
extern void udf_read_inode(struct inode *);
-extern void udf_delete_inode(struct inode *);
-extern void udf_clear_inode(struct inode *);
+extern void udf_evict_inode(struct inode *);
extern int udf_write_inode(struct inode *, struct writeback_control *wbc);
extern long udf_block_map(struct inode *, sector_t);
extern int udf_extend_file(struct inode *, struct extent_position *,
ubh_mark_buffer_dirty (USPI_UBH(uspi));
ubh_mark_buffer_dirty (UCPI_UBH(ucpi));
- if (sb->s_flags & MS_SYNCHRONOUS) {
- ubh_ll_rw_block(SWRITE, UCPI_UBH(ucpi));
- ubh_wait_on_buffer (UCPI_UBH(ucpi));
- }
+ if (sb->s_flags & MS_SYNCHRONOUS)
+ ubh_sync_block(UCPI_UBH(ucpi));
sb->s_dirt = 1;
unlock_super (sb);
ubh_mark_buffer_dirty (USPI_UBH(uspi));
ubh_mark_buffer_dirty (UCPI_UBH(ucpi));
- if (sb->s_flags & MS_SYNCHRONOUS) {
- ubh_ll_rw_block(SWRITE, UCPI_UBH(ucpi));
- ubh_wait_on_buffer (UCPI_UBH(ucpi));
- }
+ if (sb->s_flags & MS_SYNCHRONOUS)
+ ubh_sync_block(UCPI_UBH(ucpi));
if (overflow) {
fragment += count;
ubh_mark_buffer_dirty (USPI_UBH(uspi));
ubh_mark_buffer_dirty (UCPI_UBH(ucpi));
- if (sb->s_flags & MS_SYNCHRONOUS) {
- ubh_ll_rw_block(SWRITE, UCPI_UBH(ucpi));
- ubh_wait_on_buffer (UCPI_UBH(ucpi));
- }
+ if (sb->s_flags & MS_SYNCHRONOUS)
+ ubh_sync_block(UCPI_UBH(ucpi));
sb->s_dirt = 1;
UFSD("EXIT, fragment %llu\n", (unsigned long long)fragment);
succed:
ubh_mark_buffer_dirty (USPI_UBH(uspi));
ubh_mark_buffer_dirty (UCPI_UBH(ucpi));
- if (sb->s_flags & MS_SYNCHRONOUS) {
- ubh_ll_rw_block(SWRITE, UCPI_UBH(ucpi));
- ubh_wait_on_buffer (UCPI_UBH(ucpi));
- }
+ if (sb->s_flags & MS_SYNCHRONOUS)
+ ubh_sync_block(UCPI_UBH(ucpi));
sb->s_dirt = 1;
result += cgno * uspi->s_fpg;
int err;
lock_page(page);
- err = __ufs_write_begin(NULL, page->mapping, pos, len,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = ufs_prepare_chunk(page, pos, len);
BUG_ON(err);
de->d_ino = cpu_to_fs32(dir->i_sb, inode->i_ino);
got_it:
pos = page_offset(page) +
(char*)de - (char*)page_address(page);
- err = __ufs_write_begin(NULL, page->mapping, pos, rec_len,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = ufs_prepare_chunk(page, pos, rec_len);
if (err)
goto out_unlock;
if (de->d_ino) {
struct page * page)
{
struct super_block *sb = inode->i_sb;
- struct address_space *mapping = page->mapping;
char *kaddr = page_address(page);
unsigned from = ((char*)dir - kaddr) & ~(UFS_SB(sb)->s_uspi->s_dirblksize - 1);
unsigned to = ((char*)dir - kaddr) + fs16_to_cpu(sb, dir->d_reclen);
pos = page_offset(page) + from;
lock_page(page);
- err = __ufs_write_begin(NULL, mapping, pos, to - from,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = ufs_prepare_chunk(page, pos, to - from);
BUG_ON(err);
if (pde)
pde->d_reclen = cpu_to_fs16(sb, to - from);
if (!page)
return -ENOMEM;
- err = __ufs_write_begin(NULL, mapping, 0, chunk_size,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = ufs_prepare_chunk(page, 0, chunk_size);
if (err) {
unlock_page(page);
goto fail;
is_directory = S_ISDIR(inode->i_mode);
- clear_inode (inode);
-
if (ubh_isclr (UCPI_UBH(ucpi), ucpi->c_iusedoff, bit))
ufs_error(sb, "ufs_free_inode", "bit already cleared for inode %u", ino);
else {
ubh_mark_buffer_dirty (USPI_UBH(uspi));
ubh_mark_buffer_dirty (UCPI_UBH(ucpi));
- if (sb->s_flags & MS_SYNCHRONOUS) {
- ubh_ll_rw_block(SWRITE, UCPI_UBH(ucpi));
- ubh_wait_on_buffer (UCPI_UBH(ucpi));
- }
+ if (sb->s_flags & MS_SYNCHRONOUS)
+ ubh_sync_block(UCPI_UBH(ucpi));
sb->s_dirt = 1;
unlock_super (sb);
fs32_add(sb, &ucg->cg_u.cg_u2.cg_initediblk, uspi->s_inopb);
ubh_mark_buffer_dirty(UCPI_UBH(ucpi));
- if (sb->s_flags & MS_SYNCHRONOUS) {
- ubh_ll_rw_block(SWRITE, UCPI_UBH(ucpi));
- ubh_wait_on_buffer(UCPI_UBH(ucpi));
- }
+ if (sb->s_flags & MS_SYNCHRONOUS)
+ ubh_sync_block(UCPI_UBH(ucpi));
UFSD("EXIT\n");
}
}
ubh_mark_buffer_dirty (USPI_UBH(uspi));
ubh_mark_buffer_dirty (UCPI_UBH(ucpi));
- if (sb->s_flags & MS_SYNCHRONOUS) {
- ubh_ll_rw_block(SWRITE, UCPI_UBH(ucpi));
- ubh_wait_on_buffer (UCPI_UBH(ucpi));
- }
+ if (sb->s_flags & MS_SYNCHRONOUS)
+ ubh_sync_block(UCPI_UBH(ucpi));
sb->s_dirt = 1;
inode->i_ino = cg * uspi->s_ipg + bit;
return block_read_full_page(page,ufs_getfrag_block);
}
-int __ufs_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata)
+int ufs_prepare_chunk(struct page *page, loff_t pos, unsigned len)
{
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- ufs_getfrag_block);
+ return __block_write_begin(page, pos, len, ufs_getfrag_block);
}
static int ufs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return __ufs_write_begin(file, mapping, pos, len, flags, pagep, fsdata);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep,
+ ufs_getfrag_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t ufs_bmap(struct address_space *mapping, sector_t block)
return ufs_update_inode (inode, 1);
}
-void ufs_delete_inode (struct inode * inode)
+void ufs_evict_inode(struct inode * inode)
{
- loff_t old_i_size;
+ int want_delete = 0;
+
+ if (!inode->i_nlink && !is_bad_inode(inode))
+ want_delete = 1;
truncate_inode_pages(&inode->i_data, 0);
- if (is_bad_inode(inode))
- goto no_delete;
- /*UFS_I(inode)->i_dtime = CURRENT_TIME;*/
- lock_kernel();
- mark_inode_dirty(inode);
- ufs_update_inode(inode, IS_SYNC(inode));
- old_i_size = inode->i_size;
- inode->i_size = 0;
- if (inode->i_blocks && ufs_truncate(inode, old_i_size))
- ufs_warning(inode->i_sb, __func__, "ufs_truncate failed\n");
- ufs_free_inode (inode);
- unlock_kernel();
- return;
-no_delete:
- clear_inode(inode); /* We must guarantee clearing of inode... */
+ if (want_delete) {
+ loff_t old_i_size;
+ /*UFS_I(inode)->i_dtime = CURRENT_TIME;*/
+ lock_kernel();
+ mark_inode_dirty(inode);
+ ufs_update_inode(inode, IS_SYNC(inode));
+ old_i_size = inode->i_size;
+ inode->i_size = 0;
+ if (inode->i_blocks && ufs_truncate(inode, old_i_size))
+ ufs_warning(inode->i_sb, __func__, "ufs_truncate failed\n");
+ unlock_kernel();
+ }
+
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
+
+ if (want_delete) {
+ lock_kernel();
+ ufs_free_inode (inode);
+ unlock_kernel();
+ }
}
.alloc_inode = ufs_alloc_inode,
.destroy_inode = ufs_destroy_inode,
.write_inode = ufs_write_inode,
- .delete_inode = ufs_delete_inode,
+ .evict_inode = ufs_evict_inode,
.put_super = ufs_put_super,
.write_super = ufs_write_super,
.sync_fs = ufs_sync_fs,
ubh_bforget(ind_ubh);
ind_ubh = NULL;
}
- if (IS_SYNC(inode) && ind_ubh && ubh_buffer_dirty(ind_ubh)) {
- ubh_ll_rw_block(SWRITE, ind_ubh);
- ubh_wait_on_buffer (ind_ubh);
- }
+ if (IS_SYNC(inode) && ind_ubh && ubh_buffer_dirty(ind_ubh))
+ ubh_sync_block(ind_ubh);
ubh_brelse (ind_ubh);
UFSD("EXIT: ino %lu\n", inode->i_ino);
ubh_bforget(dind_bh);
dind_bh = NULL;
}
- if (IS_SYNC(inode) && dind_bh && ubh_buffer_dirty(dind_bh)) {
- ubh_ll_rw_block(SWRITE, dind_bh);
- ubh_wait_on_buffer (dind_bh);
- }
+ if (IS_SYNC(inode) && dind_bh && ubh_buffer_dirty(dind_bh))
+ ubh_sync_block(dind_bh);
ubh_brelse (dind_bh);
UFSD("EXIT: ino %lu\n", inode->i_ino);
ubh_bforget(tind_bh);
tind_bh = NULL;
}
- if (IS_SYNC(inode) && tind_bh && ubh_buffer_dirty(tind_bh)) {
- ubh_ll_rw_block(SWRITE, tind_bh);
- ubh_wait_on_buffer (tind_bh);
- }
+ if (IS_SYNC(inode) && tind_bh && ubh_buffer_dirty(tind_bh))
+ ubh_sync_block(tind_bh);
ubh_brelse (tind_bh);
UFSD("EXIT: ino %lu\n", inode->i_ino);
return err;
}
-/*
- * TODO:
- * - truncate case should use proper ordering instead of using
- * simple_setsize
- */
int ufs_setattr(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = dentry->d_inode;
if (ia_valid & ATTR_SIZE && attr->ia_size != inode->i_size) {
loff_t old_i_size = inode->i_size;
- error = simple_setsize(inode, attr->ia_size);
- if (error)
- return error;
+ /* XXX(truncate): truncate_setsize should be called last */
+ truncate_setsize(inode, attr->ia_size);
+
error = ufs_truncate(inode, old_i_size);
if (error)
return error;
}
- return inode_setattr(inode, attr);
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
const struct inode_operations ufs_file_inode_operations = {
extern struct inode *ufs_iget(struct super_block *, unsigned long);
extern int ufs_write_inode (struct inode *, struct writeback_control *);
extern int ufs_sync_inode (struct inode *);
-extern void ufs_delete_inode (struct inode *);
+extern void ufs_evict_inode (struct inode *);
extern struct buffer_head * ufs_bread (struct inode *, unsigned, int, int *);
extern int ufs_getfrag_block (struct inode *inode, sector_t fragment, struct buffer_head *bh_result, int create);
}
}
-void ubh_ll_rw_block(int rw, struct ufs_buffer_head *ubh)
+void ubh_sync_block(struct ufs_buffer_head *ubh)
{
- if (!ubh)
- return;
+ if (ubh) {
+ unsigned i;
- ll_rw_block(rw, ubh->count, ubh->bh);
-}
+ for (i = 0; i < ubh->count; i++)
+ write_dirty_buffer(ubh->bh[i], WRITE);
-void ubh_wait_on_buffer (struct ufs_buffer_head * ubh)
-{
- unsigned i;
- if (!ubh)
- return;
- for ( i = 0; i < ubh->count; i++ )
- wait_on_buffer (ubh->bh[i]);
+ for (i = 0; i < ubh->count; i++)
+ wait_on_buffer(ubh->bh[i]);
+ }
}
void ubh_bforget (struct ufs_buffer_head * ubh)
extern dev_t ufs_get_inode_dev(struct super_block *, struct ufs_inode_info *);
extern void ufs_set_inode_dev(struct super_block *, struct ufs_inode_info *, dev_t);
-extern int __ufs_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata);
+extern int ufs_prepare_chunk(struct page *page, loff_t pos, unsigned len);
/*
* These functions manipulate ufs buffers
extern void ubh_brelse_uspi (struct ufs_sb_private_info *);
extern void ubh_mark_buffer_dirty (struct ufs_buffer_head *);
extern void ubh_mark_buffer_uptodate (struct ufs_buffer_head *, int);
-extern void ubh_ll_rw_block(int, struct ufs_buffer_head *);
-extern void ubh_wait_on_buffer (struct ufs_buffer_head *);
+extern void ubh_sync_block(struct ufs_buffer_head *);
extern void ubh_bforget (struct ufs_buffer_head *);
extern int ubh_buffer_dirty (struct ufs_buffer_head *);
#define ubh_ubhcpymem(mem,ubh,size) _ubh_ubhcpymem_(uspi,mem,ubh,size)
* must be owner or have write permission.
* Else, update from *times, must be owner or super user.
*/
-long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags)
+long do_utimes(int dfd, const char __user *filename, struct timespec *times,
+ int flags)
{
int error = -EINVAL;
return error;
}
-SYSCALL_DEFINE4(utimensat, int, dfd, char __user *, filename,
+SYSCALL_DEFINE4(utimensat, int, dfd, const char __user *, filename,
struct timespec __user *, utimes, int, flags)
{
struct timespec tstimes[2];
return do_utimes(dfd, filename, utimes ? tstimes : NULL, flags);
}
-SYSCALL_DEFINE3(futimesat, int, dfd, char __user *, filename,
+SYSCALL_DEFINE3(futimesat, int, dfd, const char __user *, filename,
struct timeval __user *, utimes)
{
struct timeval times[2];
if (rw & WRITE) {
iocb->private = xfs_alloc_ioend(inode, IO_NEW);
- ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
- offset, nr_segs,
- xfs_get_blocks_direct,
- xfs_end_io_direct_write);
+ ret = __blockdev_direct_IO(rw, iocb, inode, bdev, iov,
+ offset, nr_segs,
+ xfs_get_blocks_direct,
+ xfs_end_io_direct_write, NULL, 0);
if (ret != -EIOCBQUEUED && iocb->private)
xfs_destroy_ioend(iocb->private);
} else {
- ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
- offset, nr_segs,
- xfs_get_blocks_direct,
- NULL);
+ ret = __blockdev_direct_IO(rw, iocb, inode, bdev, iov,
+ offset, nr_segs,
+ xfs_get_blocks_direct,
+ NULL, NULL, 0);
}
return ret;
}
+STATIC void
+xfs_vm_write_failed(
+ struct address_space *mapping,
+ loff_t to)
+{
+ struct inode *inode = mapping->host;
+
+ if (to > inode->i_size) {
+ struct iattr ia = {
+ .ia_valid = ATTR_SIZE | ATTR_FORCE,
+ .ia_size = inode->i_size,
+ };
+ xfs_setattr(XFS_I(inode), &ia, XFS_ATTR_NOLOCK);
+ }
+}
+
STATIC int
xfs_vm_write_begin(
struct file *file,
struct page **pagep,
void **fsdata)
{
- *pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags | AOP_FLAG_NOFS,
- pagep, fsdata, xfs_get_blocks);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags | AOP_FLAG_NOFS,
+ pagep, xfs_get_blocks);
+ if (unlikely(ret))
+ xfs_vm_write_failed(mapping, pos + len);
+ return ret;
+}
+
+STATIC int
+xfs_vm_write_end(
+ struct file *file,
+ struct address_space *mapping,
+ loff_t pos,
+ unsigned len,
+ unsigned copied,
+ struct page *page,
+ void *fsdata)
+{
+ int ret;
+
+ ret = generic_write_end(file, mapping, pos, len, copied, page, fsdata);
+ if (unlikely(ret < len))
+ xfs_vm_write_failed(mapping, pos + len);
+ return ret;
}
STATIC sector_t
.releasepage = xfs_vm_releasepage,
.invalidatepage = xfs_vm_invalidatepage,
.write_begin = xfs_vm_write_begin,
- .write_end = generic_write_end,
+ .write_end = xfs_vm_write_end,
.bmap = xfs_vm_bmap,
.direct_IO = xfs_vm_direct_IO,
.migratepage = buffer_migrate_page,
{
struct inode *inode = VFS_I(ip);
- if (!(inode->i_state & (I_WILL_FREE|I_FREEING|I_CLEAR)))
+ if (!(inode->i_state & (I_WILL_FREE|I_FREEING)))
mark_inode_dirty_sync(inode);
}
{
struct inode *inode = VFS_I(ip);
- if (!(inode->i_state & (I_WILL_FREE|I_FREEING|I_CLEAR)))
+ if (!(inode->i_state & (I_WILL_FREE|I_FREEING)))
mark_inode_dirty(inode);
}
return -xfs_setattr(XFS_I(dentry->d_inode), iattr, 0);
}
-/*
- * block_truncate_page can return an error, but we can't propagate it
- * at all here. Leave a complaint + stack trace in the syslog because
- * this could be bad. If it is bad, we need to propagate the error further.
- */
-STATIC void
-xfs_vn_truncate(
- struct inode *inode)
-{
- int error;
- error = block_truncate_page(inode->i_mapping, inode->i_size,
- xfs_get_blocks);
- WARN_ON(error);
-}
-
STATIC long
xfs_vn_fallocate(
struct inode *inode,
static const struct inode_operations xfs_inode_operations = {
.check_acl = xfs_check_acl,
- .truncate = xfs_vn_truncate,
.getattr = xfs_vn_getattr,
.setattr = xfs_vn_setattr,
.setxattr = generic_setxattr,
*/
#define xfs_sort(a,n,s,fn) sort(a,n,s,fn,NULL)
#define xfs_stack_trace() dump_stack()
-#define xfs_itruncate_data(ip, off) \
- (-vmtruncate(VFS_I(ip), (off)))
/* Move the kernel do_div definition off to one side */
}
STATIC void
-xfs_fs_clear_inode(
+xfs_fs_evict_inode(
struct inode *inode)
{
xfs_inode_t *ip = XFS_I(inode);
- trace_xfs_clear_inode(ip);
+ trace_xfs_evict_inode(ip);
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
XFS_STATS_INC(vn_rele);
XFS_STATS_INC(vn_remove);
XFS_STATS_DEC(vn_active);
.destroy_inode = xfs_fs_destroy_inode,
.dirty_inode = xfs_fs_dirty_inode,
.write_inode = xfs_fs_write_inode,
- .clear_inode = xfs_fs_clear_inode,
+ .evict_inode = xfs_fs_evict_inode,
.put_super = xfs_fs_put_super,
.sync_fs = xfs_fs_sync_fs,
.freeze_fs = xfs_fs_freeze,
DEFINE_INODE_EVENT(xfs_file_fsync);
DEFINE_INODE_EVENT(xfs_destroy_inode);
DEFINE_INODE_EVENT(xfs_write_inode);
-DEFINE_INODE_EVENT(xfs_clear_inode);
+DEFINE_INODE_EVENT(xfs_evict_inode);
DEFINE_INODE_EVENT(xfs_dquot_dqalloc);
DEFINE_INODE_EVENT(xfs_dquot_dqdetach);
* transaction to modify the i_size.
*/
code = xfs_zero_eof(ip, iattr->ia_size, ip->i_size);
+ if (code)
+ goto error_return;
}
xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ lock_flags &= ~XFS_ILOCK_EXCL;
/*
* We are going to log the inode size change in this
* really care about here and prevents waiting for other data
* not within the range we care about here.
*/
- if (!code &&
- ip->i_size != ip->i_d.di_size &&
+ if (ip->i_size != ip->i_d.di_size &&
iattr->ia_size > ip->i_d.di_size) {
code = xfs_flush_pages(ip,
ip->i_d.di_size, iattr->ia_size,
XBF_ASYNC, FI_NONE);
+ if (code)
+ goto error_return;
}
/* wait for all I/O to complete */
xfs_ioend_wait(ip);
- if (!code)
- code = xfs_itruncate_data(ip, iattr->ia_size);
- if (code) {
- ASSERT(tp == NULL);
- lock_flags &= ~XFS_ILOCK_EXCL;
- ASSERT(lock_flags == XFS_IOLOCK_EXCL || !need_iolock);
+ code = -block_truncate_page(inode->i_mapping, iattr->ia_size,
+ xfs_get_blocks);
+ if (code)
goto error_return;
- }
+
tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_SIZE);
- if ((code = xfs_trans_reserve(tp, 0,
- XFS_ITRUNCATE_LOG_RES(mp), 0,
- XFS_TRANS_PERM_LOG_RES,
- XFS_ITRUNCATE_LOG_COUNT))) {
- xfs_trans_cancel(tp, 0);
- if (need_iolock)
- xfs_iunlock(ip, XFS_IOLOCK_EXCL);
- return code;
- }
+ code = xfs_trans_reserve(tp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0,
+ XFS_TRANS_PERM_LOG_RES,
+ XFS_ITRUNCATE_LOG_COUNT);
+ if (code)
+ goto error_return;
+
+ truncate_setsize(inode, iattr->ia_size);
+
commit_flags = XFS_TRANS_RELEASE_LOG_RES;
+ lock_flags |= XFS_ILOCK_EXCL;
+
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip);
extern u8 acpi_gbl_use_default_register_widths;
extern acpi_name acpi_gbl_trace_method_name;
extern u32 acpi_gbl_trace_flags;
-extern u8 acpi_gbl_enable_aml_debug_object;
+extern u32 acpi_gbl_enable_aml_debug_object;
extern u8 acpi_gbl_copy_dsdt_locally;
extern u8 acpi_gbl_truncate_io_addresses;
#define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed(a)
#define ACPI_FREE(a) kfree(a)
-/* Used within ACPICA to show where it is safe to preempt execution */
-#include <linux/hardirq.h>
+#ifndef CONFIG_PREEMPT
+/*
+ * Used within ACPICA to show where it is safe to preempt execution
+ * when CONFIG_PREEMPT=n
+ */
#define ACPI_PREEMPTION_POINT() \
do { \
- if (!in_atomic_preempt_off() && !irqs_disabled()) \
+ if (!irqs_disabled()) \
cond_resched(); \
} while (0)
+#endif
#endif /* __KERNEL__ */
/* in processor_thermal.c */
int acpi_processor_get_limit_info(struct acpi_processor *pr);
-extern const struct file_operations acpi_processor_limit_fops;
extern struct thermal_cooling_device_ops processor_cooling_ops;
#ifdef CONFIG_CPU_FREQ
void acpi_thermal_cpufreq_init(void);
header-y += errno-base.h
header-y += errno.h
header-y += fcntl.h
+header-y += int-l64.h
+header-y += int-ll64.h
header-y += ioctl.h
header-y += ioctls.h
header-y += ipcbuf.h
header-y += param.h
header-y += poll.h
header-y += posix_types.h
+header-y += resource.h
header-y += sembuf.h
header-y += setup.h
header-y += shmbuf.h
header-y += shmparam.h
+header-y += siginfo.h
header-y += signal-defs.h
header-y += signal.h
header-y += socket.h
header-y += types.h
header-y += ucontext.h
header-y += unistd.h
-
-unifdef-y += int-l64.h
-unifdef-y += int-ll64.h
-unifdef-y += resource.h
-unifdef-y += siginfo.h
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
- $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
+ $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
header-y += kvm.h
endif
endif
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
- $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
-unifdef-y += a.out.h
+ $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+header-y += a.out.h
endif
-unifdef-y += auxvec.h
-unifdef-y += byteorder.h
-unifdef-y += bitsperlong.h
-unifdef-y += errno.h
-unifdef-y += fcntl.h
-unifdef-y += ioctl.h
-unifdef-y += ioctls.h
-unifdef-y += ipcbuf.h
-unifdef-y += mman.h
-unifdef-y += msgbuf.h
-unifdef-y += param.h
-unifdef-y += poll.h
-unifdef-y += posix_types.h
-unifdef-y += ptrace.h
-unifdef-y += resource.h
-unifdef-y += sembuf.h
-unifdef-y += setup.h
-unifdef-y += shmbuf.h
-unifdef-y += sigcontext.h
-unifdef-y += siginfo.h
-unifdef-y += signal.h
-unifdef-y += socket.h
-unifdef-y += sockios.h
-unifdef-y += stat.h
-unifdef-y += statfs.h
-unifdef-y += swab.h
-unifdef-y += termbits.h
-unifdef-y += termios.h
-unifdef-y += types.h
-unifdef-y += unistd.h
+
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += byteorder.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += unistd.h
extern int
dma_get_cache_alignment(void);
-extern int
-dma_is_consistent(struct device *dev, dma_addr_t dma_handle);
-
extern void
dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction);
#include <linux/types.h>
+/*
+ * FMODE_EXEC is 0x20
+ * FMODE_NONOTIFY is 0x1000000
+ * These cannot be used by userspace O_* until internal and external open
+ * flags are split.
+ * -Eric Paris
+ */
+
+/*
+ * When introducing new O_* bits, please check its uniqueness in fcntl_init().
+ */
+
#define O_ACCMODE 00000003
#define O_RDONLY 00000000
#define O_WRONLY 00000001
#define TCSETX 0x5433
#define TCSETXF 0x5434
#define TCSETXW 0x5435
+#define TIOCSIG _IOW('T', 0x36, int) /* pty: generate signal */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
/*
- * some architectures define FIOQSIZE as 0x545E, which is used for
- * TIOCGHAYESESP on others
+ * Some arches already define FIOQSIZE due to a historical
+ * conflict with a Hayes modem-specific ioctl value.
*/
#ifndef FIOQSIZE
-# define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-# define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
# define FIOQSIZE 0x5460
#endif
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
__kernel_fsid_t f_fsid;
__statfs_word f_namelen;
__statfs_word f_frsize;
- __statfs_word f_spare[5];
+ __statfs_word f_flags;
+ __statfs_word f_spare[4];
};
/*
__kernel_fsid_t f_fsid;
__statfs_word f_namelen;
__statfs_word f_frsize;
- __statfs_word f_spare[5];
+ __statfs_word f_flags;
+ __statfs_word f_spare[4];
} ARCH_PACK_STATFS64;
/*
__kernel_fsid_t f_fsid;
__u32 f_namelen;
__u32 f_frsize;
- __u32 f_spare[5];
+ __u32 f_flags;
+ __u32 f_spare[4];
} ARCH_PACK_COMPAT_STATFS64;
#endif
#endif
#ifndef sys_execve
-asmlinkage long sys_execve(char __user *filename, char __user * __user *argv,
- char __user * __user *envp, struct pt_regs *regs);
+asmlinkage long sys_execve(const char __user *filename,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp,
+ struct pt_regs *regs);
#endif
#ifndef sys_mmap2
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
#define __NR_wait4 260
__SYSCALL(__NR_wait4, sys_wait4)
+#define __NR_prlimit64 261
+__SYSCALL(__NR_prlimit64, sys_prlimit64)
+#define __NR_fanotify_init 262
+__SYSCALL(__NR_fanotify_init, sys_fanotify_init)
+#define __NR_fanotify_mark 263
+__SYSCALL(__NR_fanotify_mark, sys_fanotify_mark)
#undef __NR_syscalls
-#define __NR_syscalls 261
+#define __NR_syscalls 264
/*
* All syscalls below here should go away really,
-unifdef-y += drm.h drm_sarea.h drm_mode.h
-unifdef-y += i810_drm.h
-unifdef-y += i830_drm.h
-unifdef-y += i915_drm.h
-unifdef-y += mga_drm.h
-unifdef-y += r128_drm.h
-unifdef-y += radeon_drm.h
-unifdef-y += sis_drm.h
-unifdef-y += savage_drm.h
-unifdef-y += vmwgfx_drm.h
-unifdef-y += via_drm.h
-unifdef-y += nouveau_drm.h
+header-y += drm.h
+header-y += drm_mode.h
+header-y += drm_sarea.h
+header-y += i810_drm.h
+header-y += i830_drm.h
+header-y += i915_drm.h
+header-y += mga_drm.h
+header-y += nouveau_drm.h
+header-y += r128_drm.h
+header-y += radeon_drm.h
+header-y += savage_drm.h
+header-y += sis_drm.h
+header-y += via_drm.h
+header-y += vmwgfx_drm.h
return ((dev->driver->driver_features & feature) ? 1 : 0);
}
-
static inline int drm_dev_to_irq(struct drm_device *dev)
{
if (drm_core_check_feature(dev, DRIVER_USE_PLATFORM_DEVICE))
return dev->pdev->irq;
}
-#ifdef __alpha__
-#define drm_get_pci_domain(dev) dev->hose->index
-#else
-#define drm_get_pci_domain(dev) 0
-#endif
+static inline int drm_get_pci_domain(struct drm_device *dev)
+{
+ if (drm_core_check_feature(dev, DRIVER_USE_PLATFORM_DEVICE))
+ return 0;
+
+#ifndef __alpha__
+ /* For historical reasons, drm_get_pci_domain() is busticated
+ * on most archs and has to remain so for userspace interface
+ * < 1.4, except on alpha which was right from the beginning
+ */
+ if (dev->if_version < 0x10004)
+ return 0;
+#endif /* __alpha__ */
+
+ return pci_domain_nr(dev->pdev->bus);
+}
#if __OS_HAS_AGP
static inline int drm_core_has_AGP(struct drm_device *dev)
#define CORE_DATE "20060810"
#define DRM_IF_MAJOR 1
-#define DRM_IF_MINOR 3
+#define DRM_IF_MINOR 4
#define CORE_MAJOR 1
#define CORE_MINOR 1
*/
struct drm_display_info {
char name[DRM_DISPLAY_INFO_LEN];
- /* Input info */
- bool serration_vsync;
- bool sync_on_green;
- bool composite_sync;
- bool separate_syncs;
- bool blank_to_black;
- unsigned char video_level;
- bool digital;
+
/* Physical size */
unsigned int width_mm;
unsigned int height_mm;
- /* Display parameters */
- unsigned char gamma; /* FIXME: storage format */
- bool gtf_supported;
- bool standard_color;
- enum {
- monochrome = 0,
- rgb,
- other,
- unknown,
- } display_type;
- bool active_off_supported;
- bool suspend_supported;
- bool standby_supported;
-
- /* Color info FIXME: storage format */
- unsigned short redx, redy;
- unsigned short greenx, greeny;
- unsigned short bluex, bluey;
- unsigned short whitex, whitey;
-
/* Clock limits FIXME: storage format */
unsigned int min_vfreq, max_vfreq;
unsigned int min_hfreq, max_hfreq;
unsigned int pixel_clock;
- /* White point indices FIXME: storage format */
- unsigned int wpx1, wpy1;
- unsigned int wpgamma1;
- unsigned int wpx2, wpy2;
- unsigned int wpgamma2;
-
enum subpixel_order subpixel_order;
char *raw_edid; /* if any */
/* Set gamma on the CRTC */
void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
- uint32_t size);
+ uint32_t start, uint32_t size);
/* Object destroy routine */
void (*destroy)(struct drm_crtc *crtc);
#define EDID_LENGTH 128
#define DDC_ADDR 0x50
+#define CEA_EXT 0x02
+#define VTB_EXT 0x10
+#define DI_EXT 0x40
+#define LS_EXT 0x50
+#define MI_EXT 0x60
+
struct est_timings {
u8 t1;
u8 t2;
header-y += netfilter_ipv4/
header-y += netfilter_ipv6/
header-y += usb/
+header-y += wimax/
+
+objhdr-y += version.h
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
+ $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+header-y += a.out.h
+endif
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
+ $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
+header-y += kvm.h
+endif
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
+ $(srctree)/include/asm-$(SRCARCH)/kvm_para.h),)
+header-y += kvm_para.h
+endif
+header-y += acct.h
+header-y += adb.h
+header-y += adfs_fs.h
header-y += affs_hardblocks.h
+header-y += agpgart.h
header-y += aio_abi.h
+header-y += apm_bios.h
header-y += arcfb.h
+header-y += atalk.h
+header-y += atm.h
+header-y += atm_eni.h
+header-y += atm_he.h
+header-y += atm_idt77105.h
+header-y += atm_nicstar.h
+header-y += atm_tcp.h
+header-y += atm_zatm.h
header-y += atmapi.h
header-y += atmarp.h
header-y += atmbr2684.h
header-y += atmclip.h
-header-y += atm_eni.h
-header-y += atm_he.h
-header-y += atm_idt77105.h
+header-y += atmdev.h
header-y += atmioc.h
header-y += atmlec.h
header-y += atmmpc.h
-header-y += atm_nicstar.h
header-y += atmppp.h
header-y += atmsap.h
header-y += atmsvc.h
-header-y += atm_zatm.h
+header-y += audit.h
+header-y += auto_fs.h
header-y += auto_fs4.h
+header-y += auxvec.h
header-y += ax25.h
header-y += b1lli.h
header-y += baycom.h
header-y += bfs_fs.h
+header-y += binfmts.h
+header-y += blk_types.h
header-y += blkpg.h
+header-y += blktrace_api.h
header-y += bpqether.h
header-y += bsg.h
header-y += can.h
+header-y += capability.h
+header-y += capi.h
header-y += cciss_defs.h
+header-y += cciss_ioctl.h
header-y += cdk.h
+header-y += cdrom.h
+header-y += cgroupstats.h
header-y += chio.h
+header-y += cm4000_cs.h
+header-y += cn_proc.h
+header-y += coda.h
header-y += coda_psdev.h
header-y += coff.h
header-y += comstats.h
+header-y += connector.h
header-y += const.h
-header-y += cgroupstats.h
header-y += cramfs_fs.h
+header-y += cuda.h
+header-y += cyclades.h
header-y += cycx_cfm.h
header-y += dcbnl.h
-header-y += dlmconstants.h
+header-y += dccp.h
+header-y += dlm.h
header-y += dlm_device.h
header-y += dlm_netlink.h
+header-y += dlm_plock.h
+header-y += dlmconstants.h
header-y += dm-ioctl.h
header-y += dm-log-userspace.h
header-y += dn.h
header-y += dqblk_xfs.h
+header-y += edd.h
header-y += efs_fs_sb.h
-header-y += elf-fdpic.h
header-y += elf-em.h
+header-y += elf-fdpic.h
+header-y += elf.h
+header-y += elfcore.h
+header-y += errno.h
+header-y += errqueue.h
+header-y += ethtool.h
+header-y += eventpoll.h
+header-y += ext2_fs.h
header-y += fadvise.h
header-y += falloc.h
+header-y += fanotify.h
+header-y += fb.h
+header-y += fcntl.h
header-y += fd.h
header-y += fdreg.h
header-y += fib_rules.h
header-y += fiemap.h
+header-y += filter.h
header-y += firewire-cdev.h
header-y += firewire-constants.h
+header-y += flat.h
+header-y += fs.h
header-y += fuse.h
-header-y += genetlink.h
+header-y += futex.h
+header-y += gameport.h
header-y += gen_stats.h
+header-y += generic_serial.h
+header-y += genetlink.h
header-y += gfs2_ondisk.h
header-y += gigaset_dev.h
+header-y += hdlc.h
+header-y += hdlcdrv.h
+header-y += hdreg.h
+header-y += hid.h
+header-y += hiddev.h
+header-y += hidraw.h
+header-y += hpet.h
header-y += hysdn_if.h
+header-y += i2c-dev.h
+header-y += i2c.h
header-y += i2o-dev.h
header-y += i8k.h
+header-y += icmp.h
+header-y += icmpv6.h
+header-y += if.h
+header-y += if_addr.h
header-y += if_addrlabel.h
header-y += if_arcnet.h
+header-y += if_arp.h
header-y += if_bonding.h
+header-y += if_bridge.h
header-y += if_cablemodem.h
+header-y += if_ec.h
+header-y += if_eql.h
+header-y += if_ether.h
header-y += if_fc.h
-header-y += if.h
+header-y += if_fddi.h
+header-y += if_frad.h
header-y += if_hippi.h
header-y += if_infiniband.h
+header-y += if_link.h
+header-y += if_ltalk.h
header-y += if_packet.h
+header-y += if_phonet.h
header-y += if_plip.h
header-y += if_ppp.h
+header-y += if_pppol2tp.h
+header-y += if_pppox.h
header-y += if_slip.h
header-y += if_strip.h
+header-y += if_tr.h
header-y += if_tun.h
+header-y += if_tunnel.h
+header-y += if_vlan.h
header-y += if_x25.h
+header-y += igmp.h
+header-y += in.h
+header-y += in6.h
header-y += in_route.h
+header-y += inet_diag.h
+header-y += inotify.h
+header-y += input.h
header-y += ioctl.h
+header-y += ip.h
header-y += ip6_tunnel.h
+header-y += ip_vs.h
+header-y += ipc.h
+header-y += ipmi.h
header-y += ipmi_msgdefs.h
header-y += ipsec.h
-header-y += ip_vs.h
+header-y += ipv6.h
+header-y += ipv6_route.h
header-y += ipx.h
header-y += irda.h
+header-y += irqnr.h
+header-y += isdn.h
+header-y += isdn_divertif.h
+header-y += isdn_ppp.h
+header-y += isdnif.h
header-y += iso_fs.h
+header-y += ivtv.h
+header-y += ivtvfb.h
header-y += ixjuser.h
header-y += jffs2.h
+header-y += joystick.h
+header-y += kd.h
+header-y += kdev_t.h
+header-y += kernel.h
+header-y += kernelcapi.h
+header-y += keyboard.h
header-y += keyctl.h
+header-y += l2tp.h
header-y += limits.h
+header-y += llc.h
+header-y += loop.h
+header-y += lp.h
header-y += magic.h
header-y += major.h
header-y += map_to_7segment.h
header-y += matroxfb.h
+header-y += mempolicy.h
header-y += meye.h
+header-y += mii.h
header-y += minix_fs.h
+header-y += mman.h
header-y += mmtimer.h
header-y += mqueue.h
+header-y += mroute.h
+header-y += mroute6.h
+header-y += msdos_fs.h
+header-y += msg.h
header-y += mtio.h
+header-y += n_r3964.h
+header-y += nbd.h
+header-y += ncp.h
+header-y += ncp_fs.h
+header-y += ncp_mount.h
header-y += ncp_no.h
header-y += neighbour.h
+header-y += net.h
header-y += net_dropmon.h
header-y += net_tstamp.h
+header-y += netdevice.h
+header-y += netfilter.h
header-y += netfilter_arp.h
+header-y += netfilter_bridge.h
+header-y += netfilter_decnet.h
+header-y += netfilter_ipv4.h
+header-y += netfilter_ipv6.h
+header-y += netlink.h
header-y += netrom.h
+header-y += nfs.h
header-y += nfs2.h
+header-y += nfs3.h
+header-y += nfs4.h
header-y += nfs4_mount.h
+header-y += nfs_fs.h
+header-y += nfs_idmap.h
header-y += nfs_mount.h
+header-y += nfsacl.h
header-y += nl80211.h
+header-y += nubus.h
+header-y += nvram.h
header-y += omapfb.h
+header-y += oom.h
header-y += param.h
+header-y += parport.h
+header-y += patchkey.h
+header-y += pci.h
header-y += pci_regs.h
header-y += perf_event.h
+header-y += personality.h
header-y += pfkeyv2.h
header-y += pg.h
header-y += phantom.h
header-y += phonet.h
header-y += pkt_cls.h
header-y += pkt_sched.h
+header-y += pktcdvd.h
+header-y += pmu.h
+header-y += poll.h
header-y += posix_types.h
header-y += ppdev.h
+header-y += ppp-comp.h
+header-y += ppp_defs.h
+header-y += pps.h
header-y += prctl.h
-header-y += qnxtypes.h
+header-y += ptrace.h
header-y += qnx4_fs.h
+header-y += qnxtypes.h
+header-y += quota.h
header-y += radeonfb.h
+header-y += random.h
header-y += raw.h
+header-y += reboot.h
+header-y += reiserfs_fs.h
+header-y += reiserfs_xattr.h
header-y += resource.h
+header-y += rfkill.h
header-y += romfs_fs.h
header-y += rose.h
+header-y += route.h
+header-y += rtc.h
+header-y += rtnetlink.h
+header-y += scc.h
+header-y += sched.h
+header-y += screen_info.h
+header-y += sdla.h
+header-y += securebits.h
+header-y += selinux_netlink.h
+header-y += sem.h
+header-y += serial.h
+header-y += serial_core.h
header-y += serial_reg.h
+header-y += serio.h
+header-y += shm.h
+header-y += signal.h
+header-y += signalfd.h
+header-y += smb.h
+header-y += smb_fs.h
+header-y += smb_mount.h
header-y += smbno.h
header-y += snmp.h
+header-y += socket.h
header-y += sockios.h
header-y += som.h
+header-y += sonet.h
+header-y += sonypi.h
header-y += sound.h
+header-y += soundcard.h
+header-y += stat.h
+header-y += stddef.h
+header-y += string.h
header-y += suspend_ioctls.h
+header-y += swab.h
+header-y += synclink.h
+header-y += sysctl.h
header-y += taskstats.h
+header-y += tcp.h
header-y += telephony.h
header-y += termios.h
+header-y += time.h
header-y += times.h
+header-y += timex.h
header-y += tiocl.h
header-y += tipc.h
header-y += tipc_config.h
header-y += toshiba.h
+header-y += tty.h
+header-y += types.h
header-y += udf_fs_i.h
+header-y += udp.h
+header-y += uinput.h
+header-y += uio.h
header-y += ultrasound.h
header-y += un.h
+header-y += unistd.h
+header-y += usbdevice_fs.h
header-y += utime.h
+header-y += utsname.h
header-y += veth.h
+header-y += vhost.h
+header-y += videodev.h
+header-y += videodev2.h
header-y += videotext.h
-header-y += x25.h
-
-unifdef-y += acct.h
-unifdef-y += adb.h
-unifdef-y += adfs_fs.h
-unifdef-y += agpgart.h
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
- $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
-unifdef-y += a.out.h
-endif
-unifdef-y += apm_bios.h
-unifdef-y += atalk.h
-unifdef-y += atmdev.h
-unifdef-y += atm.h
-unifdef-y += atm_tcp.h
-unifdef-y += audit.h
-unifdef-y += auto_fs.h
-unifdef-y += auxvec.h
-unifdef-y += binfmts.h
-unifdef-y += blktrace_api.h
-unifdef-y += capability.h
-unifdef-y += capi.h
-unifdef-y += cciss_ioctl.h
-unifdef-y += cdrom.h
-unifdef-y += cm4000_cs.h
-unifdef-y += cn_proc.h
-unifdef-y += coda.h
-unifdef-y += connector.h
-unifdef-y += cuda.h
-unifdef-y += cyclades.h
-unifdef-y += dccp.h
-unifdef-y += dlm.h
-unifdef-y += dlm_plock.h
-unifdef-y += edd.h
-unifdef-y += elf.h
-unifdef-y += elfcore.h
-unifdef-y += errno.h
-unifdef-y += errqueue.h
-unifdef-y += ethtool.h
-unifdef-y += eventpoll.h
-unifdef-y += signalfd.h
-unifdef-y += ext2_fs.h
-unifdef-y += fb.h
-unifdef-y += fcntl.h
-unifdef-y += filter.h
-unifdef-y += flat.h
-unifdef-y += futex.h
-unifdef-y += fs.h
-unifdef-y += gameport.h
-unifdef-y += generic_serial.h
-unifdef-y += hdlcdrv.h
-unifdef-y += hdlc.h
-unifdef-y += hdreg.h
-unifdef-y += hid.h
-unifdef-y += hiddev.h
-unifdef-y += hidraw.h
-unifdef-y += hpet.h
-unifdef-y += i2c.h
-unifdef-y += i2c-dev.h
-unifdef-y += icmp.h
-unifdef-y += icmpv6.h
-unifdef-y += if_addr.h
-unifdef-y += if_arp.h
-unifdef-y += if_bridge.h
-unifdef-y += if_ec.h
-unifdef-y += if_eql.h
-unifdef-y += if_ether.h
-unifdef-y += if_fddi.h
-unifdef-y += if_frad.h
-unifdef-y += if_ltalk.h
-unifdef-y += if_link.h
-unifdef-y += if_phonet.h
-unifdef-y += if_pppol2tp.h
-unifdef-y += if_pppox.h
-unifdef-y += if_tr.h
-unifdef-y += if_tunnel.h
-unifdef-y += if_vlan.h
-unifdef-y += igmp.h
-unifdef-y += inet_diag.h
-unifdef-y += in.h
-unifdef-y += in6.h
-unifdef-y += inotify.h
-unifdef-y += input.h
-unifdef-y += ip.h
-unifdef-y += ipc.h
-unifdef-y += ipmi.h
-unifdef-y += ipv6.h
-unifdef-y += ipv6_route.h
-unifdef-y += isdn.h
-unifdef-y += isdnif.h
-unifdef-y += isdn_divertif.h
-unifdef-y += isdn_ppp.h
-unifdef-y += ivtv.h
-unifdef-y += ivtvfb.h
-unifdef-y += joystick.h
-unifdef-y += kdev_t.h
-unifdef-y += kd.h
-unifdef-y += kernelcapi.h
-unifdef-y += kernel.h
-unifdef-y += keyboard.h
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
- $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
-unifdef-y += kvm.h
-endif
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
- $(srctree)/include/asm-$(SRCARCH)/kvm_para.h),)
-unifdef-y += kvm_para.h
-endif
-unifdef-y += l2tp.h
-unifdef-y += llc.h
-unifdef-y += loop.h
-unifdef-y += lp.h
-unifdef-y += mempolicy.h
-unifdef-y += mii.h
-unifdef-y += mman.h
-unifdef-y += mroute.h
-unifdef-y += mroute6.h
-unifdef-y += msdos_fs.h
-unifdef-y += msg.h
-unifdef-y += nbd.h
-unifdef-y += ncp_fs.h
-unifdef-y += ncp.h
-unifdef-y += ncp_mount.h
-unifdef-y += netdevice.h
-unifdef-y += netfilter_bridge.h
-unifdef-y += netfilter_decnet.h
-unifdef-y += netfilter.h
-unifdef-y += netfilter_ipv4.h
-unifdef-y += netfilter_ipv6.h
-unifdef-y += net.h
-unifdef-y += netlink.h
-unifdef-y += nfs3.h
-unifdef-y += nfs4.h
-unifdef-y += nfsacl.h
-unifdef-y += nfs_fs.h
-unifdef-y += nfs.h
-unifdef-y += nfs_idmap.h
-unifdef-y += n_r3964.h
-unifdef-y += nubus.h
-unifdef-y += nvram.h
-unifdef-y += oom.h
-unifdef-y += parport.h
-unifdef-y += patchkey.h
-unifdef-y += pci.h
-unifdef-y += personality.h
-unifdef-y += pktcdvd.h
-unifdef-y += pmu.h
-unifdef-y += poll.h
-unifdef-y += ppp_defs.h
-unifdef-y += ppp-comp.h
-unifdef-y += pps.h
-unifdef-y += ptrace.h
-unifdef-y += quota.h
-unifdef-y += random.h
-unifdef-y += rfkill.h
-unifdef-y += irqnr.h
-unifdef-y += reboot.h
-unifdef-y += reiserfs_fs.h
-unifdef-y += reiserfs_xattr.h
-unifdef-y += route.h
-unifdef-y += rtc.h
-unifdef-y += rtnetlink.h
-unifdef-y += scc.h
-unifdef-y += sched.h
-unifdef-y += screen_info.h
-unifdef-y += sdla.h
-unifdef-y += securebits.h
-unifdef-y += selinux_netlink.h
-unifdef-y += sem.h
-unifdef-y += serial_core.h
-unifdef-y += serial.h
-unifdef-y += serio.h
-unifdef-y += shm.h
-unifdef-y += signal.h
-unifdef-y += smb_fs.h
-unifdef-y += smb.h
-unifdef-y += smb_mount.h
-unifdef-y += socket.h
-unifdef-y += sonet.h
-unifdef-y += sonypi.h
-unifdef-y += soundcard.h
-unifdef-y += stat.h
-unifdef-y += stddef.h
-unifdef-y += string.h
-unifdef-y += swab.h
-unifdef-y += synclink.h
-unifdef-y += sysctl.h
-unifdef-y += tcp.h
-unifdef-y += time.h
-unifdef-y += timex.h
-unifdef-y += tty.h
-unifdef-y += types.h
-unifdef-y += udp.h
-unifdef-y += uinput.h
-unifdef-y += uio.h
-unifdef-y += unistd.h
-unifdef-y += usbdevice_fs.h
-unifdef-y += utsname.h
-unifdef-y += vhost.h
-unifdef-y += videodev2.h
-unifdef-y += videodev.h
-unifdef-y += virtio_config.h
-unifdef-y += virtio_ids.h
-unifdef-y += virtio_blk.h
-unifdef-y += virtio_net.h
-unifdef-y += virtio_9p.h
-unifdef-y += virtio_balloon.h
-unifdef-y += virtio_console.h
-unifdef-y += virtio_pci.h
-unifdef-y += virtio_ring.h
-unifdef-y += virtio_rng.h
-unifdef-y += vt.h
-unifdef-y += wait.h
-unifdef-y += wanrouter.h
-unifdef-y += watchdog.h
-unifdef-y += wireless.h
-unifdef-y += xattr.h
-unifdef-y += xfrm.h
-
-objhdr-y += version.h
+header-y += virtio_9p.h
+header-y += virtio_balloon.h
+header-y += virtio_blk.h
+header-y += virtio_config.h
+header-y += virtio_console.h
+header-y += virtio_ids.h
+header-y += virtio_net.h
+header-y += virtio_pci.h
+header-y += virtio_ring.h
+header-y += virtio_rng.h
+header-y += vt.h
+header-y += wait.h
+header-y += wanrouter.h
+header-y += watchdog.h
header-y += wimax.h
-header-y += wimax/
+header-y += wireless.h
+header-y += x25.h
+header-y += xattr.h
+header-y += xfrm.h
u16 off_cntl;
u32 clcd_cntl;
u32 cmap[16];
+ bool clk_enabled;
};
static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
#define audit_putname(n) do { ; } while (0)
#define __audit_inode(n,d) do { ; } while (0)
#define __audit_inode_child(i,p) do { ; } while (0)
-#define audit_inode(n,d) do { ; } while (0)
+#define audit_inode(n,d) do { (void)(d); } while (0)
#define audit_inode_child(i,p) do { ; } while (0)
#define audit_core_dumps(i) do { ; } while (0)
#define auditsc_get_stamp(c,t,s) (0)
#define AUTOFS_IOC_FAIL _IO(0x93,0x61)
#define AUTOFS_IOC_CATATONIC _IO(0x93,0x62)
#define AUTOFS_IOC_PROTOVER _IOR(0x93,0x63,int)
+#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
#define AUTOFS_IOC_EXPIRE _IOR(0x93,0x65,struct autofs_packet_expire)
BDI_async_congested, /* The async (write) queue is getting full */
BDI_sync_congested, /* The sync queue is getting full */
BDI_registered, /* bdi_register() was done */
+ BDI_writeback_running, /* Writeback is in progress */
BDI_unused, /* Available bits start here */
};
#define BDI_STAT_BATCH (8*(1+ilog2(nr_cpu_ids)))
struct bdi_writeback {
- struct list_head list; /* hangs off the bdi */
-
- struct backing_dev_info *bdi; /* our parent bdi */
+ struct backing_dev_info *bdi; /* our parent bdi */
unsigned int nr;
- unsigned long last_old_flush; /* last old data flush */
+ unsigned long last_old_flush; /* last old data flush */
+ unsigned long last_active; /* last time bdi thread was active */
- struct task_struct *task; /* writeback task */
- struct list_head b_dirty; /* dirty inodes */
- struct list_head b_io; /* parked for writeback */
- struct list_head b_more_io; /* parked for more writeback */
+ struct task_struct *task; /* writeback thread */
+ struct timer_list wakeup_timer; /* used for delayed bdi thread wakeup */
+ struct list_head b_dirty; /* dirty inodes */
+ struct list_head b_io; /* parked for writeback */
+ struct list_head b_more_io; /* parked for more writeback */
};
struct backing_dev_info {
struct list_head bdi_list;
- struct rcu_head rcu_head;
unsigned long ra_pages; /* max readahead in PAGE_CACHE_SIZE units */
unsigned long state; /* Always use atomic bitops on this */
unsigned int capabilities; /* Device capabilities */
unsigned int max_ratio, max_prop_frac;
struct bdi_writeback wb; /* default writeback info for this bdi */
- spinlock_t wb_lock; /* protects update side of wb_list */
- struct list_head wb_list; /* the flusher threads hanging off this bdi */
+ spinlock_t wb_lock; /* protects work_list */
struct list_head work_list;
int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int);
void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages);
void bdi_start_background_writeback(struct backing_dev_info *bdi);
-int bdi_writeback_task(struct bdi_writeback *wb);
+int bdi_writeback_thread(void *data);
int bdi_has_dirty_io(struct backing_dev_info *bdi);
void bdi_arm_supers_timer(void);
+void bdi_wakeup_thread_delayed(struct backing_dev_info *bdi);
extern spinlock_t bdi_lock;
extern struct list_head bdi_list;
int unsafe; /* how unsafe this exec is (mask of LSM_UNSAFE_*) */
unsigned int per_clear; /* bits to clear in current->personality */
int argc, envc;
- char * filename; /* Name of binary as seen by procps */
- char * interp; /* Name of the binary really executed. Most
+ const char * filename; /* Name of binary as seen by procps */
+ const char * interp; /* Name of the binary really executed. Most
of the time same as filename, but could be
different for binfmt_{misc,script} */
unsigned interp_flags;
unsigned long stack_top,
int executable_stack);
extern int bprm_mm_init(struct linux_binprm *bprm);
-extern int copy_strings_kernel(int argc,char ** argv,struct linux_binprm *bprm);
+extern int copy_strings_kernel(int argc, const char *const *argv,
+ struct linux_binprm *bprm);
extern int prepare_bprm_creds(struct linux_binprm *bprm);
extern void install_exec_creds(struct linux_binprm *bprm);
extern void do_coredump(long signr, int exit_code, struct pt_regs *regs);
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
-
+ *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
#include <asm/io.h>
+/* struct bio, bio_vec and BIO_* flags are defined in blk_types.h */
+#include <linux/blk_types.h>
+
#define BIO_DEBUG
#ifdef BIO_DEBUG
#define BIO_MAX_SIZE (BIO_MAX_PAGES << PAGE_CACHE_SHIFT)
#define BIO_MAX_SECTORS (BIO_MAX_SIZE >> 9)
-/*
- * was unsigned short, but we might as well be ready for > 64kB I/O pages
- */
-struct bio_vec {
- struct page *bv_page;
- unsigned int bv_len;
- unsigned int bv_offset;
-};
-
-struct bio_set;
-struct bio;
-struct bio_integrity_payload;
-typedef void (bio_end_io_t) (struct bio *, int);
-typedef void (bio_destructor_t) (struct bio *);
-
-/*
- * main unit of I/O for the block layer and lower layers (ie drivers and
- * stacking drivers)
- */
-struct bio {
- sector_t bi_sector; /* device address in 512 byte
- sectors */
- struct bio *bi_next; /* request queue link */
- struct block_device *bi_bdev;
- unsigned long bi_flags; /* status, command, etc */
- unsigned long bi_rw; /* bottom bits READ/WRITE,
- * top bits priority
- */
-
- unsigned short bi_vcnt; /* how many bio_vec's */
- unsigned short bi_idx; /* current index into bvl_vec */
-
- /* Number of segments in this BIO after
- * physical address coalescing is performed.
- */
- unsigned int bi_phys_segments;
-
- unsigned int bi_size; /* residual I/O count */
-
- /*
- * To keep track of the max segment size, we account for the
- * sizes of the first and last mergeable segments in this bio.
- */
- unsigned int bi_seg_front_size;
- unsigned int bi_seg_back_size;
-
- unsigned int bi_max_vecs; /* max bvl_vecs we can hold */
-
- unsigned int bi_comp_cpu; /* completion CPU */
-
- atomic_t bi_cnt; /* pin count */
-
- struct bio_vec *bi_io_vec; /* the actual vec list */
-
- bio_end_io_t *bi_end_io;
-
- void *bi_private;
-#if defined(CONFIG_BLK_DEV_INTEGRITY)
- struct bio_integrity_payload *bi_integrity; /* data integrity */
-#endif
-
- bio_destructor_t *bi_destructor; /* destructor */
-
- /*
- * We can inline a number of vecs at the end of the bio, to avoid
- * double allocations for a small number of bio_vecs. This member
- * MUST obviously be kept at the very end of the bio.
- */
- struct bio_vec bi_inline_vecs[0];
-};
-
-/*
- * bio flags
- */
-#define BIO_UPTODATE 0 /* ok after I/O completion */
-#define BIO_RW_BLOCK 1 /* RW_AHEAD set, and read/write would block */
-#define BIO_EOF 2 /* out-out-bounds error */
-#define BIO_SEG_VALID 3 /* bi_phys_segments valid */
-#define BIO_CLONED 4 /* doesn't own data */
-#define BIO_BOUNCED 5 /* bio is a bounce bio */
-#define BIO_USER_MAPPED 6 /* contains user pages */
-#define BIO_EOPNOTSUPP 7 /* not supported */
-#define BIO_CPU_AFFINE 8 /* complete bio on same CPU as submitted */
-#define BIO_NULL_MAPPED 9 /* contains invalid user pages */
-#define BIO_FS_INTEGRITY 10 /* fs owns integrity data, not block layer */
-#define BIO_QUIET 11 /* Make BIO Quiet */
-#define bio_flagged(bio, flag) ((bio)->bi_flags & (1 << (flag)))
-
-/*
- * top 4 bits of bio flags indicate the pool this bio came from
- */
-#define BIO_POOL_BITS (4)
-#define BIO_POOL_NONE ((1UL << BIO_POOL_BITS) - 1)
-#define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS)
-#define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET)
-#define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET)
-
-/*
- * bio bi_rw flags
- *
- * bit 0 -- data direction
- * If not set, bio is a read from device. If set, it's a write to device.
- * bit 1 -- fail fast device errors
- * bit 2 -- fail fast transport errors
- * bit 3 -- fail fast driver errors
- * bit 4 -- rw-ahead when set
- * bit 5 -- barrier
- * Insert a serialization point in the IO queue, forcing previously
- * submitted IO to be completed before this one is issued.
- * bit 6 -- synchronous I/O hint.
- * bit 7 -- Unplug the device immediately after submitting this bio.
- * bit 8 -- metadata request
- * Used for tracing to differentiate metadata and data IO. May also
- * get some preferential treatment in the IO scheduler
- * bit 9 -- discard sectors
- * Informs the lower level device that this range of sectors is no longer
- * used by the file system and may thus be freed by the device. Used
- * for flash based storage.
- * Don't want driver retries for any fast fail whatever the reason.
- * bit 10 -- Tell the IO scheduler not to wait for more requests after this
- one has been submitted, even if it is a SYNC request.
- */
-enum bio_rw_flags {
- BIO_RW,
- BIO_RW_FAILFAST_DEV,
- BIO_RW_FAILFAST_TRANSPORT,
- BIO_RW_FAILFAST_DRIVER,
- /* above flags must match REQ_* */
- BIO_RW_AHEAD,
- BIO_RW_BARRIER,
- BIO_RW_SYNCIO,
- BIO_RW_UNPLUG,
- BIO_RW_META,
- BIO_RW_DISCARD,
- BIO_RW_NOIDLE,
-};
-
-/*
- * First four bits must match between bio->bi_rw and rq->cmd_flags, make
- * that explicit here.
- */
-#define BIO_RW_RQ_MASK 0xf
-
-static inline bool bio_rw_flagged(struct bio *bio, enum bio_rw_flags flag)
-{
- return (bio->bi_rw & (1 << flag)) != 0;
-}
-
/*
* upper 16 bits of bi_rw define the io priority of this bio
*/
#define bio_offset(bio) bio_iovec((bio))->bv_offset
#define bio_segments(bio) ((bio)->bi_vcnt - (bio)->bi_idx)
#define bio_sectors(bio) ((bio)->bi_size >> 9)
-#define bio_empty_barrier(bio) (bio_rw_flagged(bio, BIO_RW_BARRIER) && !bio_has_data(bio) && !bio_rw_flagged(bio, BIO_RW_DISCARD))
+#define bio_empty_barrier(bio) \
+ ((bio->bi_rw & REQ_HARDBARRIER) && \
+ !bio_has_data(bio) && \
+ !(bio->bi_rw & REQ_DISCARD))
static inline unsigned int bio_cur_bytes(struct bio *bio)
{
--- /dev/null
+/*
+ * Block data types and constants. Directly include this file only to
+ * break include dependency loop.
+ */
+#ifndef __LINUX_BLK_TYPES_H
+#define __LINUX_BLK_TYPES_H
+
+#ifdef CONFIG_BLOCK
+
+#include <linux/types.h>
+
+struct bio_set;
+struct bio;
+struct bio_integrity_payload;
+struct page;
+struct block_device;
+typedef void (bio_end_io_t) (struct bio *, int);
+typedef void (bio_destructor_t) (struct bio *);
+
+/*
+ * was unsigned short, but we might as well be ready for > 64kB I/O pages
+ */
+struct bio_vec {
+ struct page *bv_page;
+ unsigned int bv_len;
+ unsigned int bv_offset;
+};
+
+/*
+ * main unit of I/O for the block layer and lower layers (ie drivers and
+ * stacking drivers)
+ */
+struct bio {
+ sector_t bi_sector; /* device address in 512 byte
+ sectors */
+ struct bio *bi_next; /* request queue link */
+ struct block_device *bi_bdev;
+ unsigned long bi_flags; /* status, command, etc */
+ unsigned long bi_rw; /* bottom bits READ/WRITE,
+ * top bits priority
+ */
+
+ unsigned short bi_vcnt; /* how many bio_vec's */
+ unsigned short bi_idx; /* current index into bvl_vec */
+
+ /* Number of segments in this BIO after
+ * physical address coalescing is performed.
+ */
+ unsigned int bi_phys_segments;
+
+ unsigned int bi_size; /* residual I/O count */
+
+ /*
+ * To keep track of the max segment size, we account for the
+ * sizes of the first and last mergeable segments in this bio.
+ */
+ unsigned int bi_seg_front_size;
+ unsigned int bi_seg_back_size;
+
+ unsigned int bi_max_vecs; /* max bvl_vecs we can hold */
+
+ unsigned int bi_comp_cpu; /* completion CPU */
+
+ atomic_t bi_cnt; /* pin count */
+
+ struct bio_vec *bi_io_vec; /* the actual vec list */
+
+ bio_end_io_t *bi_end_io;
+
+ void *bi_private;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ struct bio_integrity_payload *bi_integrity; /* data integrity */
+#endif
+
+ bio_destructor_t *bi_destructor; /* destructor */
+
+ /*
+ * We can inline a number of vecs at the end of the bio, to avoid
+ * double allocations for a small number of bio_vecs. This member
+ * MUST obviously be kept at the very end of the bio.
+ */
+ struct bio_vec bi_inline_vecs[0];
+};
+
+/*
+ * bio flags
+ */
+#define BIO_UPTODATE 0 /* ok after I/O completion */
+#define BIO_RW_BLOCK 1 /* RW_AHEAD set, and read/write would block */
+#define BIO_EOF 2 /* out-out-bounds error */
+#define BIO_SEG_VALID 3 /* bi_phys_segments valid */
+#define BIO_CLONED 4 /* doesn't own data */
+#define BIO_BOUNCED 5 /* bio is a bounce bio */
+#define BIO_USER_MAPPED 6 /* contains user pages */
+#define BIO_EOPNOTSUPP 7 /* not supported */
+#define BIO_CPU_AFFINE 8 /* complete bio on same CPU as submitted */
+#define BIO_NULL_MAPPED 9 /* contains invalid user pages */
+#define BIO_FS_INTEGRITY 10 /* fs owns integrity data, not block layer */
+#define BIO_QUIET 11 /* Make BIO Quiet */
+#define bio_flagged(bio, flag) ((bio)->bi_flags & (1 << (flag)))
+
+/*
+ * top 4 bits of bio flags indicate the pool this bio came from
+ */
+#define BIO_POOL_BITS (4)
+#define BIO_POOL_NONE ((1UL << BIO_POOL_BITS) - 1)
+#define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS)
+#define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET)
+#define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET)
+
+#endif /* CONFIG_BLOCK */
+
+/*
+ * Request flags. For use in the cmd_flags field of struct request, and in
+ * bi_rw of struct bio. Note that some flags are only valid in either one.
+ */
+enum rq_flag_bits {
+ /* common flags */
+ __REQ_WRITE, /* not set, read. set, write */
+ __REQ_FAILFAST_DEV, /* no driver retries of device errors */
+ __REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
+ __REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */
+
+ __REQ_HARDBARRIER, /* may not be passed by drive either */
+ __REQ_SYNC, /* request is sync (sync write or read) */
+ __REQ_META, /* metadata io request */
+ __REQ_DISCARD, /* request to discard sectors */
+ __REQ_NOIDLE, /* don't anticipate more IO after this one */
+
+ /* bio only flags */
+ __REQ_UNPLUG, /* unplug the immediately after submission */
+ __REQ_RAHEAD, /* read ahead, can fail anytime */
+
+ /* request only flags */
+ __REQ_SORTED, /* elevator knows about this request */
+ __REQ_SOFTBARRIER, /* may not be passed by ioscheduler */
+ __REQ_FUA, /* forced unit access */
+ __REQ_NOMERGE, /* don't touch this for merging */
+ __REQ_STARTED, /* drive already may have started this one */
+ __REQ_DONTPREP, /* don't call prep for this one */
+ __REQ_QUEUED, /* uses queueing */
+ __REQ_ELVPRIV, /* elevator private data attached */
+ __REQ_FAILED, /* set if the request failed */
+ __REQ_QUIET, /* don't worry about errors */
+ __REQ_PREEMPT, /* set for "ide_preempt" requests */
+ __REQ_ORDERED_COLOR, /* is before or after barrier */
+ __REQ_ALLOCED, /* request came from our alloc pool */
+ __REQ_COPY_USER, /* contains copies of user pages */
+ __REQ_INTEGRITY, /* integrity metadata has been remapped */
+ __REQ_FLUSH, /* request for cache flush */
+ __REQ_IO_STAT, /* account I/O stat */
+ __REQ_MIXED_MERGE, /* merge of different types, fail separately */
+ __REQ_SECURE, /* secure discard (used with __REQ_DISCARD) */
+ __REQ_NR_BITS, /* stops here */
+};
+
+#define REQ_WRITE (1 << __REQ_WRITE)
+#define REQ_FAILFAST_DEV (1 << __REQ_FAILFAST_DEV)
+#define REQ_FAILFAST_TRANSPORT (1 << __REQ_FAILFAST_TRANSPORT)
+#define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER)
+#define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER)
+#define REQ_SYNC (1 << __REQ_SYNC)
+#define REQ_META (1 << __REQ_META)
+#define REQ_DISCARD (1 << __REQ_DISCARD)
+#define REQ_NOIDLE (1 << __REQ_NOIDLE)
+
+#define REQ_FAILFAST_MASK \
+ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
+#define REQ_COMMON_MASK \
+ (REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \
+ REQ_META| REQ_DISCARD | REQ_NOIDLE)
+
+#define REQ_UNPLUG (1 << __REQ_UNPLUG)
+#define REQ_RAHEAD (1 << __REQ_RAHEAD)
+
+#define REQ_SORTED (1 << __REQ_SORTED)
+#define REQ_SOFTBARRIER (1 << __REQ_SOFTBARRIER)
+#define REQ_FUA (1 << __REQ_FUA)
+#define REQ_NOMERGE (1 << __REQ_NOMERGE)
+#define REQ_STARTED (1 << __REQ_STARTED)
+#define REQ_DONTPREP (1 << __REQ_DONTPREP)
+#define REQ_QUEUED (1 << __REQ_QUEUED)
+#define REQ_ELVPRIV (1 << __REQ_ELVPRIV)
+#define REQ_FAILED (1 << __REQ_FAILED)
+#define REQ_QUIET (1 << __REQ_QUIET)
+#define REQ_PREEMPT (1 << __REQ_PREEMPT)
+#define REQ_ORDERED_COLOR (1 << __REQ_ORDERED_COLOR)
+#define REQ_ALLOCED (1 << __REQ_ALLOCED)
+#define REQ_COPY_USER (1 << __REQ_COPY_USER)
+#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
+#define REQ_FLUSH (1 << __REQ_FLUSH)
+#define REQ_IO_STAT (1 << __REQ_IO_STAT)
+#define REQ_MIXED_MERGE (1 << __REQ_MIXED_MERGE)
+#define REQ_SECURE (1 << __REQ_SECURE)
+
+#endif /* __LINUX_BLK_TYPES_H */
REQ_TYPE_PM_RESUME, /* resume request */
REQ_TYPE_PM_SHUTDOWN, /* shutdown request */
REQ_TYPE_SPECIAL, /* driver defined type */
- REQ_TYPE_LINUX_BLOCK, /* generic block layer message */
/*
* for ATA/ATAPI devices. this really doesn't belong here, ide should
* use REQ_TYPE_SPECIAL and use rq->cmd[0] with the range of driver
REQ_TYPE_ATA_PC,
};
-/*
- * For request of type REQ_TYPE_LINUX_BLOCK, rq->cmd[0] is the opcode being
- * sent down (similar to how REQ_TYPE_BLOCK_PC means that ->cmd[] holds a
- * SCSI cdb.
- *
- * 0x00 -> 0x3f are driver private, to be used for whatever purpose they need,
- * typically to differentiate REQ_TYPE_SPECIAL requests.
- *
- */
-enum {
- REQ_LB_OP_EJECT = 0x40, /* eject request */
- REQ_LB_OP_FLUSH = 0x41, /* flush request */
-};
-
-/*
- * request type modified bits. first four bits match BIO_RW* bits, important
- */
-enum rq_flag_bits {
- __REQ_RW, /* not set, read. set, write */
- __REQ_FAILFAST_DEV, /* no driver retries of device errors */
- __REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
- __REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */
- /* above flags must match BIO_RW_* */
- __REQ_DISCARD, /* request to discard sectors */
- __REQ_SORTED, /* elevator knows about this request */
- __REQ_SOFTBARRIER, /* may not be passed by ioscheduler */
- __REQ_HARDBARRIER, /* may not be passed by drive either */
- __REQ_FUA, /* forced unit access */
- __REQ_NOMERGE, /* don't touch this for merging */
- __REQ_STARTED, /* drive already may have started this one */
- __REQ_DONTPREP, /* don't call prep for this one */
- __REQ_QUEUED, /* uses queueing */
- __REQ_ELVPRIV, /* elevator private data attached */
- __REQ_FAILED, /* set if the request failed */
- __REQ_QUIET, /* don't worry about errors */
- __REQ_PREEMPT, /* set for "ide_preempt" requests */
- __REQ_ORDERED_COLOR, /* is before or after barrier */
- __REQ_RW_SYNC, /* request is sync (sync write or read) */
- __REQ_ALLOCED, /* request came from our alloc pool */
- __REQ_RW_META, /* metadata io request */
- __REQ_COPY_USER, /* contains copies of user pages */
- __REQ_INTEGRITY, /* integrity metadata has been remapped */
- __REQ_NOIDLE, /* Don't anticipate more IO after this one */
- __REQ_IO_STAT, /* account I/O stat */
- __REQ_MIXED_MERGE, /* merge of different types, fail separately */
- __REQ_NR_BITS, /* stops here */
-};
-
-#define REQ_RW (1 << __REQ_RW)
-#define REQ_FAILFAST_DEV (1 << __REQ_FAILFAST_DEV)
-#define REQ_FAILFAST_TRANSPORT (1 << __REQ_FAILFAST_TRANSPORT)
-#define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER)
-#define REQ_DISCARD (1 << __REQ_DISCARD)
-#define REQ_SORTED (1 << __REQ_SORTED)
-#define REQ_SOFTBARRIER (1 << __REQ_SOFTBARRIER)
-#define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER)
-#define REQ_FUA (1 << __REQ_FUA)
-#define REQ_NOMERGE (1 << __REQ_NOMERGE)
-#define REQ_STARTED (1 << __REQ_STARTED)
-#define REQ_DONTPREP (1 << __REQ_DONTPREP)
-#define REQ_QUEUED (1 << __REQ_QUEUED)
-#define REQ_ELVPRIV (1 << __REQ_ELVPRIV)
-#define REQ_FAILED (1 << __REQ_FAILED)
-#define REQ_QUIET (1 << __REQ_QUIET)
-#define REQ_PREEMPT (1 << __REQ_PREEMPT)
-#define REQ_ORDERED_COLOR (1 << __REQ_ORDERED_COLOR)
-#define REQ_RW_SYNC (1 << __REQ_RW_SYNC)
-#define REQ_ALLOCED (1 << __REQ_ALLOCED)
-#define REQ_RW_META (1 << __REQ_RW_META)
-#define REQ_COPY_USER (1 << __REQ_COPY_USER)
-#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
-#define REQ_NOIDLE (1 << __REQ_NOIDLE)
-#define REQ_IO_STAT (1 << __REQ_IO_STAT)
-#define REQ_MIXED_MERGE (1 << __REQ_MIXED_MERGE)
-
-#define REQ_FAILFAST_MASK (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | \
- REQ_FAILFAST_DRIVER)
-
#define BLK_MAX_CDB 16
/*
typedef void (request_fn_proc) (struct request_queue *q);
typedef int (make_request_fn) (struct request_queue *q, struct bio *bio);
typedef int (prep_rq_fn) (struct request_queue *, struct request *);
+typedef void (unprep_rq_fn) (struct request_queue *, struct request *);
typedef void (unplug_fn) (struct request_queue *);
struct bio_vec;
};
typedef int (merge_bvec_fn) (struct request_queue *, struct bvec_merge_data *,
struct bio_vec *);
-typedef void (prepare_flush_fn) (struct request_queue *, struct request *);
typedef void (softirq_done_fn)(struct request *);
typedef int (dma_drain_needed_fn)(struct request *);
typedef int (lld_busy_fn) (struct request_queue *q);
request_fn_proc *request_fn;
make_request_fn *make_request_fn;
prep_rq_fn *prep_rq_fn;
+ unprep_rq_fn *unprep_rq_fn;
unplug_fn *unplug_fn;
merge_bvec_fn *merge_bvec_fn;
- prepare_flush_fn *prepare_flush_fn;
softirq_done_fn *softirq_done_fn;
rq_timed_out_fn *rq_timed_out_fn;
dma_drain_needed_fn *dma_drain_needed;
#define QUEUE_FLAG_IO_STAT 15 /* do IO stats */
#define QUEUE_FLAG_DISCARD 16 /* supports DISCARD */
#define QUEUE_FLAG_NOXMERGES 17 /* No extended merges */
+#define QUEUE_FLAG_ADD_RANDOM 18 /* Contributes to random pool */
+#define QUEUE_FLAG_SECDISCARD 19 /* supports SECDISCARD */
#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
(1 << QUEUE_FLAG_CLUSTER) | \
(1 << QUEUE_FLAG_STACKABLE) | \
- (1 << QUEUE_FLAG_SAME_COMP))
+ (1 << QUEUE_FLAG_SAME_COMP) | \
+ (1 << QUEUE_FLAG_ADD_RANDOM))
static inline int queue_is_locked(struct request_queue *q)
{
test_bit(QUEUE_FLAG_NOXMERGES, &(q)->queue_flags)
#define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
#define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
+#define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
#define blk_queue_flushing(q) ((q)->ordseq)
#define blk_queue_stackable(q) \
test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags)
#define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
+#define blk_queue_secdiscard(q) (blk_queue_discard(q) && \
+ test_bit(QUEUE_FLAG_SECDISCARD, &(q)->queue_flags))
+
+#define blk_noretry_request(rq) \
+ ((rq)->cmd_flags & (REQ_FAILFAST_DEV|REQ_FAILFAST_TRANSPORT| \
+ REQ_FAILFAST_DRIVER))
+
+#define blk_account_rq(rq) \
+ (((rq)->cmd_flags & REQ_STARTED) && \
+ ((rq)->cmd_type == REQ_TYPE_FS || \
+ ((rq)->cmd_flags & REQ_DISCARD)))
-#define blk_fs_request(rq) ((rq)->cmd_type == REQ_TYPE_FS)
-#define blk_pc_request(rq) ((rq)->cmd_type == REQ_TYPE_BLOCK_PC)
-#define blk_special_request(rq) ((rq)->cmd_type == REQ_TYPE_SPECIAL)
-#define blk_sense_request(rq) ((rq)->cmd_type == REQ_TYPE_SENSE)
-
-#define blk_failfast_dev(rq) ((rq)->cmd_flags & REQ_FAILFAST_DEV)
-#define blk_failfast_transport(rq) ((rq)->cmd_flags & REQ_FAILFAST_TRANSPORT)
-#define blk_failfast_driver(rq) ((rq)->cmd_flags & REQ_FAILFAST_DRIVER)
-#define blk_noretry_request(rq) (blk_failfast_dev(rq) || \
- blk_failfast_transport(rq) || \
- blk_failfast_driver(rq))
-#define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED)
-#define blk_rq_io_stat(rq) ((rq)->cmd_flags & REQ_IO_STAT)
-#define blk_rq_quiet(rq) ((rq)->cmd_flags & REQ_QUIET)
-
-#define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq)))
-
-#define blk_pm_suspend_request(rq) ((rq)->cmd_type == REQ_TYPE_PM_SUSPEND)
-#define blk_pm_resume_request(rq) ((rq)->cmd_type == REQ_TYPE_PM_RESUME)
#define blk_pm_request(rq) \
- (blk_pm_suspend_request(rq) || blk_pm_resume_request(rq))
+ ((rq)->cmd_type == REQ_TYPE_PM_SUSPEND || \
+ (rq)->cmd_type == REQ_TYPE_PM_RESUME)
#define blk_rq_cpu_valid(rq) ((rq)->cpu != -1)
-#define blk_sorted_rq(rq) ((rq)->cmd_flags & REQ_SORTED)
-#define blk_barrier_rq(rq) ((rq)->cmd_flags & REQ_HARDBARRIER)
-#define blk_fua_rq(rq) ((rq)->cmd_flags & REQ_FUA)
-#define blk_discard_rq(rq) ((rq)->cmd_flags & REQ_DISCARD)
#define blk_bidi_rq(rq) ((rq)->next_rq != NULL)
/* rq->queuelist of dequeued request must be list_empty() */
#define blk_queued_rq(rq) (!list_empty(&(rq)->queuelist))
*/
static inline bool rw_is_sync(unsigned int rw_flags)
{
- return !(rw_flags & REQ_RW) || (rw_flags & REQ_RW_SYNC);
+ return !(rw_flags & REQ_WRITE) || (rw_flags & REQ_SYNC);
}
static inline bool rq_is_sync(struct request *rq)
return rw_is_sync(rq->cmd_flags);
}
-#define rq_is_meta(rq) ((rq)->cmd_flags & REQ_RW_META)
-#define rq_noidle(rq) ((rq)->cmd_flags & REQ_NOIDLE)
-
static inline int blk_queue_full(struct request_queue *q, int sync)
{
if (sync)
(REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER)
#define rq_mergeable(rq) \
(!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \
- (blk_discard_rq(rq) || blk_fs_request((rq))))
+ (((rq)->cmd_flags & REQ_DISCARD) || \
+ (rq)->cmd_type == REQ_TYPE_FS))
/*
* q->prep_rq_fn return values
#define BLK_BOUNCE_HIGH -1ULL
#endif
#define BLK_BOUNCE_ANY (-1ULL)
-#define BLK_BOUNCE_ISA (ISA_DMA_THRESHOLD)
+#define BLK_BOUNCE_ISA (DMA_BIT_MASK(24))
/*
* default timeout for SG_IO if none specified
gfp_t);
extern void blk_insert_request(struct request_queue *, struct request *, int, void *);
extern void blk_requeue_request(struct request_queue *, struct request *);
+extern void blk_add_request_payload(struct request *rq, struct page *page,
+ unsigned int len);
extern int blk_rq_check_limits(struct request_queue *q, struct request *rq);
extern int blk_lld_busy(struct request_queue *q);
extern int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
extern void __blk_complete_request(struct request *);
extern void blk_abort_request(struct request *);
extern void blk_abort_queue(struct request_queue *);
+extern void blk_unprep_request(struct request *);
/*
* Access functions for manipulating queue properties
extern void blk_queue_lld_busy(struct request_queue *q, lld_busy_fn *fn);
extern void blk_queue_segment_boundary(struct request_queue *, unsigned long);
extern void blk_queue_prep_rq(struct request_queue *, prep_rq_fn *pfn);
+extern void blk_queue_unprep_rq(struct request_queue *, unprep_rq_fn *ufn);
extern void blk_queue_merge_bvec(struct request_queue *, merge_bvec_fn *);
extern void blk_queue_dma_alignment(struct request_queue *, int);
extern void blk_queue_update_dma_alignment(struct request_queue *, int);
extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *);
extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
-extern int blk_queue_ordered(struct request_queue *, unsigned, prepare_flush_fn *);
+extern int blk_queue_ordered(struct request_queue *, unsigned);
extern bool blk_do_ordered(struct request_queue *, struct request **);
extern unsigned blk_ordered_cur_seq(struct request_queue *);
extern unsigned blk_ordered_req_seq(struct request *);
}
enum{
BLKDEV_WAIT, /* wait for completion */
- BLKDEV_BARRIER, /*issue request with barrier */
+ BLKDEV_BARRIER, /* issue request with barrier */
+ BLKDEV_SECURE, /* secure discard */
};
#define BLKDEV_IFL_WAIT (1 << BLKDEV_WAIT)
#define BLKDEV_IFL_BARRIER (1 << BLKDEV_BARRIER)
+#define BLKDEV_IFL_SECURE (1 << BLKDEV_SECURE)
extern int blkdev_issue_flush(struct block_device *, gfp_t, sector_t *,
unsigned long);
extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
{
block <<= (sb->s_blocksize_bits - 9);
nr_blocks <<= (sb->s_blocksize_bits - 9);
- return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_KERNEL,
+ return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_NOFS,
BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER);
}
struct block_device_operations {
int (*open) (struct block_device *, fmode_t);
int (*release) (struct gendisk *, fmode_t);
- int (*locked_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
int (*direct_access) (struct block_device *, sector_t,
#ifdef __KERNEL__
#include <linux/blkdev.h>
#include <linux/relay.h>
+#include <linux/compat.h>
#endif
/*
#endif /* CONFIG_BLK_DEV_IO_TRACE */
+#ifdef CONFIG_COMPAT
+
+struct compat_blk_user_trace_setup {
+ char name[32];
+ u16 act_mask;
+ u32 buf_size;
+ u32 buf_nr;
+ compat_u64 start_lba;
+ compat_u64 end_lba;
+ u32 pid;
+};
+#define BLKTRACESETUP32 _IOWR(0x12, 115, struct compat_blk_user_trace_setup)
+
+#endif
+
#if defined(CONFIG_EVENT_TRACING) && defined(CONFIG_BLOCK)
static inline int blk_cmd_buf_len(struct request *rq)
{
- return blk_pc_request(rq) ? rq->cmd_len * 3 : 1;
+ return (rq->cmd_type == REQ_TYPE_BLOCK_PC) ? rq->cmd_len * 3 : 1;
}
extern void blk_dump_cmd(char *buf, struct request *rq);
BH_Delay, /* Buffer is not yet allocated on disk */
BH_Boundary, /* Block is followed by a discontiguity */
BH_Write_EIO, /* I/O error on write */
- BH_Ordered, /* ordered write */
BH_Eopnotsupp, /* operation not supported (barrier) */
BH_Unwritten, /* Buffer is allocated on disk but not written */
BH_Quiet, /* Buffer Error Prinks to be quiet */
BUFFER_FNS(Delay, delay)
BUFFER_FNS(Boundary, boundary)
BUFFER_FNS(Write_EIO, write_io_error)
-BUFFER_FNS(Ordered, ordered)
BUFFER_FNS(Eopnotsupp, eopnotsupp)
BUFFER_FNS(Unwritten, unwritten)
void __lock_buffer(struct buffer_head *bh);
void ll_rw_block(int, int, struct buffer_head * bh[]);
int sync_dirty_buffer(struct buffer_head *bh);
+int __sync_dirty_buffer(struct buffer_head *bh, int rw);
+void write_dirty_buffer(struct buffer_head *bh, int rw);
int submit_bh(int, struct buffer_head *);
void write_boundary_block(struct block_device *bdev,
sector_t bblock, unsigned blocksize);
int block_read_full_page(struct page*, get_block_t*);
int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
unsigned long from);
-int block_write_begin_newtrunc(struct file *, struct address_space *,
- loff_t, unsigned, unsigned,
- struct page **, void **, get_block_t*);
-int block_write_begin(struct file *, struct address_space *,
- loff_t, unsigned, unsigned,
- struct page **, void **, get_block_t*);
+int block_write_begin(struct address_space *mapping, loff_t pos, unsigned len,
+ unsigned flags, struct page **pagep, get_block_t *get_block);
+int __block_write_begin(struct page *page, loff_t pos, unsigned len,
+ get_block_t *get_block);
int block_write_end(struct file *, struct address_space *,
loff_t, unsigned, unsigned,
struct page *, void *);
struct page *, void *);
void page_zero_new_buffers(struct page *page, unsigned from, unsigned to);
int block_prepare_write(struct page*, unsigned, unsigned, get_block_t*);
-int cont_write_begin_newtrunc(struct file *, struct address_space *, loff_t,
- unsigned, unsigned, struct page **, void **,
- get_block_t *, loff_t *);
int cont_write_begin(struct file *, struct address_space *, loff_t,
unsigned, unsigned, struct page **, void **,
get_block_t *, loff_t *);
void block_sync_page(struct page *);
sector_t generic_block_bmap(struct address_space *, sector_t, get_block_t *);
int block_truncate_page(struct address_space *, loff_t, get_block_t *);
-int file_fsync(struct file *, int);
-int nobh_write_begin_newtrunc(struct file *, struct address_space *,
- loff_t, unsigned, unsigned,
- struct page **, void **, get_block_t*);
-int nobh_write_begin(struct file *, struct address_space *,
- loff_t, unsigned, unsigned,
+int nobh_write_begin(struct address_space *, loff_t, unsigned, unsigned,
struct page **, void **, get_block_t*);
int nobh_write_end(struct file *, struct address_space *,
loff_t, unsigned, unsigned,
-unifdef-y += big_endian.h
-unifdef-y += little_endian.h
+header-y += big_endian.h
+header-y += little_endian.h
wait_queue_head_t uc_sleep; /* process' wait queue */
};
-#define REQ_ASYNC 0x1
-#define REQ_READ 0x2
-#define REQ_WRITE 0x4
-#define REQ_ABORT 0x8
+#define CODA_REQ_ASYNC 0x1
+#define CODA_REQ_READ 0x2
+#define CODA_REQ_WRITE 0x4
+#define CODA_REQ_ABORT 0x8
#endif
const compat_sigset_t __user *sigmask,
compat_size_t sigsetsize);
-asmlinkage long compat_sys_utimensat(unsigned int dfd, char __user *filename,
+asmlinkage long compat_sys_utimensat(unsigned int dfd, const char __user *filename,
struct compat_timespec __user *t, int flags);
asmlinkage long compat_sys_signalfd(int ufd,
const int __user *nodes,
int __user *status,
int flags);
-asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename,
+asmlinkage long compat_sys_futimesat(unsigned int dfd, const char __user *filename,
struct compat_timeval __user *t);
-asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user * filename,
+asmlinkage long compat_sys_newfstatat(unsigned int dfd, const char __user * filename,
struct compat_stat __user *statbuf,
int flag);
asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
#define NPAR 16
struct vc_data {
+ struct tty_port port; /* Upper level data */
+
unsigned short vc_num; /* Console number */
unsigned int vc_cols; /* [#] Console size */
unsigned int vc_rows;
/* VT terminal data */
unsigned int vc_state; /* Escape sequence parser state */
unsigned int vc_npar,vc_par[NPAR]; /* Parameters of current escape sequence */
- struct tty_struct *vc_tty; /* TTY we are attached to */
/* data for manual vt switching */
struct vt_mode vt_mode;
struct pid *vt_pid;
struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */
unsigned long vc_uni_pagedir;
unsigned long *vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */
+ bool vc_panic_force_write; /* when oops/panic this VC can accept forced output/blanking */
/* additional information is in vt_kern.h */
};
* Severity difinition for error_severity in struct cper_record_header
* and section_severity in struct cper_section_descriptor
*/
-#define CPER_SER_RECOVERABLE 0x0
-#define CPER_SER_FATAL 0x1
-#define CPER_SER_CORRECTED 0x2
-#define CPER_SER_INFORMATIONAL 0x3
+#define CPER_SEV_RECOVERABLE 0x0
+#define CPER_SEV_FATAL 0x1
+#define CPER_SEV_CORRECTED 0x2
+#define CPER_SEV_INFORMATIONAL 0x3
/*
* Validation bits difinition for validation_bits in struct
extern char *__d_path(const struct path *path, struct path *root, char *, int);
extern char *d_path(const struct path *, char *, int);
+extern char *d_path_with_unreachable(const struct path *, char *, int);
+extern char *__dentry_path(struct dentry *, char *, int);
extern char *dentry_path(struct dentry *, char *, int);
/* Allocation counts.. */
union map_info {
void *ptr;
unsigned long long ll;
- unsigned flush_request;
+ unsigned target_request_nr;
};
/*
* A number of zero-length barrier requests that will be submitted
* to the target for the purpose of flushing cache.
*
- * The request number will be placed in union map_info->flush_request.
+ * The request number will be placed in union map_info->target_request_nr.
* It is a responsibility of the target driver to remap these requests
* to the real underlying devices.
*/
unsigned num_flush_requests;
+ /*
+ * The number of discard requests that will be submitted to the
+ * target. map_info->request_nr is used just like num_flush_requests.
+ */
+ unsigned num_discard_requests;
+
/* target specific data */
void *private;
#define dm_array_too_big(fixed, obj, num) \
((num) > (UINT_MAX - (fixed)) / (obj))
+/*
+ * Sector offset taken relative to the start of the target instead of
+ * relative to the start of the device.
+ */
+#define dm_target_offset(ti, sector) ((sector) - (ti)->begin)
+
static inline sector_t to_sector(unsigned long n)
{
return (n >> SECTOR_SHIFT);
#include <linux/types.h>
#define DM_DIR "mapper" /* Slashes not supported */
+#define DM_CONTROL_NODE "control"
#define DM_MAX_TYPE_NAME 16
#define DM_NAME_LEN 128
#define DM_UUID_LEN 129
#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
#define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 17
+#define DM_VERSION_MINOR 18
#define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl (2010-03-05)"
+#define DM_VERSION_EXTRA "-ioctl (2010-06-29)"
/* Status bits */
#define DM_READONLY_FLAG (1 << 0) /* In/Out */
return -EIO;
}
+#ifdef CONFIG_HAS_DMA
+static inline int dma_get_cache_alignment(void)
+{
+#ifdef ARCH_DMA_MINALIGN
+ return ARCH_DMA_MINALIGN;
+#endif
+ return 1;
+}
+#endif
+
/* flags for the coherent memory api */
#define DMA_MEMORY_MAP 0x01
#define DMA_MEMORY_IO 0x02
FS_CREATE | FS_DN_RENAME |\
FS_MOVED_FROM | FS_MOVED_TO)
+extern int dir_notify_enable;
extern void dnotify_flush(struct file *, fl_owner_t);
extern int fcntl_dirnotify(int, struct file *, unsigned long);
extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.8"
+#define REL_VERSION "8.3.8.1"
#define API_VERSION 88
#define PRO_VERSION_MIN 86
#define PRO_VERSION_MAX 94
NL_INTEGER( 30, T_MAY_IGNORE, rate)
NL_INTEGER( 31, T_MAY_IGNORE, after)
NL_INTEGER( 32, T_MAY_IGNORE, al_extents)
- NL_INTEGER( 71, T_MAY_IGNORE, dp_volume)
- NL_INTEGER( 72, T_MAY_IGNORE, dp_interval)
- NL_INTEGER( 73, T_MAY_IGNORE, throttle_th)
- NL_INTEGER( 74, T_MAY_IGNORE, hold_off_th)
+/* NL_INTEGER( 71, T_MAY_IGNORE, dp_volume)
+ * NL_INTEGER( 72, T_MAY_IGNORE, dp_interval)
+ * NL_INTEGER( 73, T_MAY_IGNORE, throttle_th)
+ * NL_INTEGER( 74, T_MAY_IGNORE, hold_off_th)
+ * feature will be reimplemented differently with 8.3.9 */
NL_STRING( 52, T_MAY_IGNORE, verify_alg, SHARED_SECRET_MAX)
NL_STRING( 51, T_MAY_IGNORE, cpu_mask, 32)
NL_STRING( 64, T_MAY_IGNORE, csums_alg, SHARED_SECRET_MAX)
+header-y += audio.h
header-y += ca.h
+header-y += dmx.h
header-y += frontend.h
header-y += net.h
header-y += osd.h
header-y += version.h
-
-unifdef-y += audio.h
-unifdef-y += dmx.h
-unifdef-y += video.h
+header-y += video.h
/**
* dev_hw_addr_random - Create random MAC and set device flag
* @dev: pointer to net_device structure
- * @addr: Pointer to a six-byte array containing the Ethernet address
+ * @hwaddr: Pointer to a six-byte array containing the Ethernet address
*
* Generate random MAC to be used by a device and set addr_assign_type
* so the state can be read by sysfs and be used by udev.
extern struct inode *ext3_iget(struct super_block *, unsigned long);
extern int ext3_write_inode (struct inode *, struct writeback_control *);
extern int ext3_setattr (struct dentry *, struct iattr *);
-extern void ext3_delete_inode (struct inode *);
+extern void ext3_evict_inode (struct inode *);
extern int ext3_sync_inode (handle_t *, struct inode *);
extern void ext3_discard_reservation (struct inode *);
extern void ext3_dirty_inode(struct inode *);
--- /dev/null
+#ifndef _LINUX_FANOTIFY_H
+#define _LINUX_FANOTIFY_H
+
+#include <linux/types.h>
+
+/* the following events that user-space can register for */
+#define FAN_ACCESS 0x00000001 /* File was accessed */
+#define FAN_MODIFY 0x00000002 /* File was modified */
+#define FAN_CLOSE_WRITE 0x00000008 /* Unwrittable file closed */
+#define FAN_CLOSE_NOWRITE 0x00000010 /* Writtable file closed */
+#define FAN_OPEN 0x00000020 /* File was opened */
+
+#define FAN_EVENT_ON_CHILD 0x08000000 /* interested in child events */
+
+/* FIXME currently Q's have no limit.... */
+#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
+
+#define FAN_OPEN_PERM 0x00010000 /* File open in perm check */
+#define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */
+
+/* helper events */
+#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
+
+/* flags used for fanotify_init() */
+#define FAN_CLOEXEC 0x00000001
+#define FAN_NONBLOCK 0x00000002
+
+#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK)
+
+/* flags used for fanotify_modify_mark() */
+#define FAN_MARK_ADD 0x00000001
+#define FAN_MARK_REMOVE 0x00000002
+#define FAN_MARK_DONT_FOLLOW 0x00000004
+#define FAN_MARK_ONLYDIR 0x00000008
+#define FAN_MARK_MOUNT 0x00000010
+#define FAN_MARK_IGNORED_MASK 0x00000020
+#define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040
+#define FAN_MARK_FLUSH 0x00000080
+
+#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\
+ FAN_MARK_REMOVE |\
+ FAN_MARK_DONT_FOLLOW |\
+ FAN_MARK_ONLYDIR |\
+ FAN_MARK_MOUNT |\
+ FAN_MARK_IGNORED_MASK |\
+ FAN_MARK_IGNORED_SURV_MODIFY)
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility. Apps will get only the
+ * events that they originally wanted. Be sure to add new events here!
+ */
+#define FAN_ALL_EVENTS (FAN_ACCESS |\
+ FAN_MODIFY |\
+ FAN_CLOSE |\
+ FAN_OPEN)
+
+/*
+ * All events which require a permission response from userspace
+ */
+#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
+ FAN_ACCESS_PERM)
+
+#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\
+ FAN_ALL_PERM_EVENTS |\
+ FAN_Q_OVERFLOW)
+
+#define FANOTIFY_METADATA_VERSION 1
+
+struct fanotify_event_metadata {
+ __u32 event_len;
+ __u32 vers;
+ __s32 fd;
+ __u64 mask;
+ __s64 pid;
+} __attribute__ ((packed));
+
+struct fanotify_response {
+ __s32 fd;
+ __u32 response;
+} __attribute__ ((packed));
+
+/* Legit userspace responses to a _PERM event */
+#define FAN_ALLOW 0x01
+#define FAN_DENY 0x02
+
+/* Helper functions to deal with fanotify_event_metadata buffers */
+#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
+
+#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
+ (struct fanotify_event_metadata*)(((char *)(meta)) + \
+ (meta)->event_len))
+
+#define FAN_EVENT_OK(meta, len) ((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
+ (long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
+ (long)(meta)->event_len <= (long)(len))
+
+#ifdef __KERNEL__
+
+struct fanotify_wait {
+ struct fsnotify_event *event;
+ __s32 fd;
+};
+#endif /* __KERNEL__ */
+#endif /* _LINUX_FANOTIFY_H */
*/
#define FBINFO_BE_MATH 0x100000
+/* report to the VT layer that this fb driver can accept forced console
+ output like oopses */
+#define FBINFO_CAN_FORCE_OUTPUT 0x200000
+
struct fb_info {
int node;
int flags;
#include <linux/limits.h>
#include <linux/ioctl.h>
+#include <linux/blk_types.h>
/*
* It's silly to have NR_OPEN bigger than NR_FILE, but you can change
/* Expect random access pattern */
#define FMODE_RANDOM ((__force fmode_t)0x1000)
+/* File was opened by fanotify and shouldn't generate fanotify events */
+#define FMODE_NONOTIFY ((__force fmode_t)0x1000000)
+
/*
* The below are the various read and write types that we support. Some of
* them include behavioral modifiers that send information down to the
* immediately wait on this read without caring about
* unplugging.
* READA Used for read-ahead operations. Lower priority, and the
- * block layer could (in theory) choose to ignore this
+ * block layer could (in theory) choose to ignore this
* request if it runs into resource problems.
* WRITE A normal async write. Device will be plugged.
- * SWRITE Like WRITE, but a special case for ll_rw_block() that
- * tells it to lock the buffer first. Normally a buffer
- * must be locked before doing IO.
* WRITE_SYNC_PLUG Synchronous write. Identical to WRITE, but passes down
* the hint that someone will be waiting on this IO
* shortly. The device must still be unplugged explicitly,
* immediately after submission. The write equivalent
* of READ_SYNC.
* WRITE_ODIRECT_PLUG Special case write for O_DIRECT only.
- * SWRITE_SYNC
- * SWRITE_SYNC_PLUG Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer.
- * See SWRITE.
- * WRITE_BARRIER Like WRITE, but tells the block layer that all
+ * WRITE_BARRIER Like WRITE_SYNC, but tells the block layer that all
* previously submitted writes must be safely on storage
* before this one is started. Also guarantees that when
* this write is complete, it itself is also safely on
* of this IO.
*
*/
-#define RW_MASK 1
-#define RWA_MASK 2
-#define READ 0
-#define WRITE 1
-#define READA 2 /* read-ahead - don't block if no resources */
-#define SWRITE 3 /* for ll_rw_block() - wait for buffer lock */
-#define READ_SYNC (READ | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG))
-#define READ_META (READ | (1 << BIO_RW_META))
-#define WRITE_SYNC_PLUG (WRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
-#define WRITE_SYNC (WRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
-#define WRITE_ODIRECT_PLUG (WRITE | (1 << BIO_RW_SYNCIO))
-#define WRITE_META (WRITE | (1 << BIO_RW_META))
-#define SWRITE_SYNC_PLUG \
- (SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
-#define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
-#define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER))
+#define RW_MASK REQ_WRITE
+#define RWA_MASK REQ_RAHEAD
+
+#define READ 0
+#define WRITE RW_MASK
+#define READA RWA_MASK
+
+#define READ_SYNC (READ | REQ_SYNC | REQ_UNPLUG)
+#define READ_META (READ | REQ_META)
+#define WRITE_SYNC_PLUG (WRITE | REQ_SYNC | REQ_NOIDLE)
+#define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG)
+#define WRITE_ODIRECT_PLUG (WRITE | REQ_SYNC)
+#define WRITE_META (WRITE | REQ_META)
+#define WRITE_BARRIER (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \
+ REQ_HARDBARRIER)
/*
* These aren't really reads or writes, they pass down information about
* parts of device that are now unused by the file system.
*/
-#define DISCARD_NOBARRIER (WRITE | (1 << BIO_RW_DISCARD))
-#define DISCARD_BARRIER (DISCARD_NOBARRIER | (1 << BIO_RW_BARRIER))
+#define DISCARD_NOBARRIER (WRITE | REQ_DISCARD)
+#define DISCARD_BARRIER (WRITE | REQ_DISCARD | REQ_HARDBARRIER)
+#define DISCARD_SECURE (DISCARD_NOBARRIER | REQ_SECURE)
#define SEL_IN 1
#define SEL_OUT 2
#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */
#define MS_I_VERSION (1<<23) /* Update inode I_version field */
#define MS_STRICTATIME (1<<24) /* Always perform atime updates */
+#define MS_BORN (1<<29)
#define MS_ACTIVE (1<<30)
#define MS_NOUSER (1<<31)
#define BLKALIGNOFF _IO(0x12,122)
#define BLKPBSZGET _IO(0x12,123)
#define BLKDISCARDZEROES _IO(0x12,124)
+#define BLKSECDISCARD _IO(0x12,125)
#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */
#define FIBMAP _IO(0x00,1) /* bmap access */
extern int sysctl_nr_open;
extern struct inodes_stat_t inodes_stat;
extern int leases_enable, lease_break_time;
-#ifdef CONFIG_DNOTIFY
-extern int dir_notify_enable;
-#endif
struct buffer_head;
typedef int (get_block_t)(struct inode *inode, sector_t iblock,
#ifdef CONFIG_FSNOTIFY
__u32 i_fsnotify_mask; /* all events this inode cares about */
- struct hlist_head i_fsnotify_mark_entries; /* fsnotify mark entries */
-#endif
-
-#ifdef CONFIG_INOTIFY
- struct list_head inotify_watches; /* watches on this inode */
- struct mutex inotify_mutex; /* protects the watches list */
+ struct hlist_head i_fsnotify_marks;
#endif
unsigned long i_state;
#define f_vfsmnt f_path.mnt
const struct file_operations *f_op;
spinlock_t f_lock; /* f_ep_links, f_flags, no IRQ */
+#ifdef CONFIG_SMP
+ int f_sb_list_cpu;
+#endif
atomic_long_t f_count;
unsigned int f_flags;
fmode_t f_mode;
unsigned long f_mnt_write_state;
#endif
};
-extern spinlock_t files_lock;
-#define file_list_lock() spin_lock(&files_lock);
-#define file_list_unlock() spin_unlock(&files_lock);
#define get_file(x) atomic_long_inc(&(x)->f_count)
#define fput_atomic(x) atomic_long_add_unless(&(x)->f_count, -1, 1)
struct list_head s_inodes; /* all inodes */
struct hlist_head s_anon; /* anonymous dentries for (nfs) exporting */
+#ifdef CONFIG_SMP
+ struct list_head __percpu *s_files;
+#else
struct list_head s_files;
+#endif
/* s_dentry_lru and s_nr_dentry_unused are protected by dcache_lock */
struct list_head s_dentry_lru; /* unused dentry lru */
int s_nr_dentry_unused; /* # of dentry on lru */
/*
* NOTE:
- * read, write, poll, fsync, readv, writev, unlocked_ioctl and compat_ioctl
- * can be called without the big kernel lock held in all filesystems.
+ * all file operations except setlease can be called without
+ * the big kernel lock held in all filesystems.
*/
struct file_operations {
struct module *owner;
ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
int (*readdir) (struct file *, void *, filldir_t);
unsigned int (*poll) (struct file *, struct poll_table_struct *);
- int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, struct writeback_control *wbc);
- void (*drop_inode) (struct inode *);
- void (*delete_inode) (struct inode *);
+ int (*drop_inode) (struct inode *);
+ void (*evict_inode) (struct inode *);
void (*put_super) (struct super_block *);
void (*write_super) (struct super_block *);
int (*sync_fs)(struct super_block *sb, int wait);
int (*unfreeze_fs) (struct super_block *);
int (*statfs) (struct dentry *, struct kstatfs *);
int (*remount_fs) (struct super_block *, int *, char *);
- void (*clear_inode) (struct inode *);
void (*umount_begin) (struct super_block *);
int (*show_options)(struct seq_file *, struct vfsmount *);
* I_FREEING Set when inode is about to be freed but still has dirty
* pages or buffers attached or the inode itself is still
* dirty.
- * I_CLEAR Set by clear_inode(). In this state the inode is clean
- * and can be destroyed.
+ * I_CLEAR Added by end_writeback(). In this state the inode is clean
+ * and can be destroyed. Inode keeps I_FREEING.
*
* Inodes that are I_WILL_FREE, I_FREEING or I_CLEAR are
* prohibited for many purposes. iget() must wait for
extern void drop_collected_mounts(struct vfsmount *);
extern int iterate_mounts(int (*)(struct vfsmount *, void *), void *,
struct vfsmount *);
-extern int vfs_statfs(struct dentry *, struct kstatfs *);
+extern int vfs_statfs(struct path *, struct kstatfs *);
+extern int statfs_by_dentry(struct dentry *, struct kstatfs *);
extern int freeze_super(struct super_block *super);
extern int thaw_super(struct super_block *super);
extern struct inode * igrab(struct inode *);
extern ino_t iunique(struct super_block *, ino_t);
extern int inode_needs_sync(struct inode *inode);
-extern void generic_delete_inode(struct inode *inode);
-extern void generic_drop_inode(struct inode *inode);
-extern int generic_detach_inode(struct inode *inode);
+extern int generic_delete_inode(struct inode *inode);
+extern int generic_drop_inode(struct inode *inode);
extern struct inode *ilookup5_nowait(struct super_block *sb,
unsigned long hashval, int (*test)(struct inode *, void *),
extern void __iget(struct inode * inode);
extern void iget_failed(struct inode *);
-extern void clear_inode(struct inode *);
+extern void end_writeback(struct inode *);
extern void destroy_inode(struct inode *);
extern void __destroy_inode(struct inode *);
extern struct inode *new_inode(struct super_block *);
__insert_inode_hash(inode, inode->i_ino);
}
-extern void file_move(struct file *f, struct list_head *list);
-extern void file_kill(struct file *f);
#ifdef CONFIG_BLOCK
-struct bio;
extern void submit_bio(int, struct bio *);
extern int bdev_read_only(struct block_device *);
#endif
#endif
#ifdef CONFIG_BLOCK
-struct bio;
typedef void (dio_submit_t)(int rw, struct bio *bio, struct inode *inode,
loff_t file_offset);
-void dio_end_io(struct bio *bio, int error);
-
-ssize_t __blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb, struct inode *inode,
- struct block_device *bdev, const struct iovec *iov, loff_t offset,
- unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
- dio_submit_t submit_io, int lock_type);
-ssize_t __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
- struct block_device *bdev, const struct iovec *iov, loff_t offset,
- unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
- dio_submit_t submit_io, int lock_type);
enum {
/* need locking between buffered and direct access */
DIO_SKIP_HOLES = 0x02,
};
-static inline ssize_t blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb,
- struct inode *inode, struct block_device *bdev, const struct iovec *iov,
- loff_t offset, unsigned long nr_segs, get_block_t get_block,
- dio_iodone_t end_io)
-{
- return __blockdev_direct_IO_newtrunc(rw, iocb, inode, bdev, iov, offset,
- nr_segs, get_block, end_io, NULL,
- DIO_LOCKING | DIO_SKIP_HOLES);
-}
+void dio_end_io(struct bio *bio, int error);
+
+ssize_t __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
+ struct block_device *bdev, const struct iovec *iov, loff_t offset,
+ unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
+ dio_submit_t submit_io, int flags);
-static inline ssize_t blockdev_direct_IO_no_locking_newtrunc(int rw, struct kiocb *iocb,
- struct inode *inode, struct block_device *bdev, const struct iovec *iov,
- loff_t offset, unsigned long nr_segs, get_block_t get_block,
- dio_iodone_t end_io)
-{
- return __blockdev_direct_IO_newtrunc(rw, iocb, inode, bdev, iov, offset,
- nr_segs, get_block, end_io, NULL, 0);
-}
static inline ssize_t blockdev_direct_IO(int rw, struct kiocb *iocb,
struct inode *inode, struct block_device *bdev, const struct iovec *iov,
loff_t offset, unsigned long nr_segs, get_block_t get_block,
nr_segs, get_block, end_io, NULL,
DIO_LOCKING | DIO_SKIP_HOLES);
}
-
-static inline ssize_t blockdev_direct_IO_no_locking(int rw, struct kiocb *iocb,
- struct inode *inode, struct block_device *bdev, const struct iovec *iov,
- loff_t offset, unsigned long nr_segs, get_block_t get_block,
- dio_iodone_t end_io)
-{
- return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset,
- nr_segs, get_block, end_io, NULL, 0);
-}
#endif
extern const struct file_operations generic_ro_fops;
extern int vfs_readdir(struct file *, filldir_t, void *);
-extern int vfs_stat(char __user *, struct kstat *);
-extern int vfs_lstat(char __user *, struct kstat *);
+extern int vfs_stat(const char __user *, struct kstat *);
+extern int vfs_lstat(const char __user *, struct kstat *);
extern int vfs_fstat(unsigned int, struct kstat *);
-extern int vfs_fstatat(int , char __user *, struct kstat *, int);
+extern int vfs_fstatat(int , const char __user *, struct kstat *, int);
extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
unsigned long arg);
extern int simple_unlink(struct inode *, struct dentry *);
extern int simple_rmdir(struct inode *, struct dentry *);
extern int simple_rename(struct inode *, struct dentry *, struct inode *, struct dentry *);
-extern int simple_setsize(struct inode *, loff_t);
extern int noop_fsync(struct file *, int);
extern int simple_empty(struct dentry *);
extern int simple_readpage(struct file *file, struct page *page);
extern int inode_change_ok(const struct inode *, struct iattr *);
extern int inode_newsize_ok(const struct inode *, loff_t offset);
-extern int __must_check inode_setattr(struct inode *, const struct iattr *);
-extern void generic_setattr(struct inode *inode, const struct iattr *attr);
+extern void setattr_copy(struct inode *inode, const struct iattr *attr);
extern void file_update_time(struct file *file);
int __init get_filesystem_list(char *buf);
#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE])
-#define OPEN_FMODE(flag) ((__force fmode_t)((flag + 1) & O_ACCMODE))
+#define OPEN_FMODE(flag) ((__force fmode_t)(((flag + 1) & O_ACCMODE) | \
+ (flag & FMODE_NONOTIFY)))
#endif /* __KERNEL__ */
#endif /* _LINUX_FS_H */
struct fs_struct {
int users;
- rwlock_t lock;
+ spinlock_t lock;
int umask;
int in_exec;
struct path root, pwd;
extern void daemonize_fs_struct(void);
extern int unshare_fs_struct(void);
+static inline void get_fs_root(struct fs_struct *fs, struct path *root)
+{
+ spin_lock(&fs->lock);
+ *root = fs->root;
+ path_get(root);
+ spin_unlock(&fs->lock);
+}
+
+static inline void get_fs_pwd(struct fs_struct *fs, struct path *pwd)
+{
+ spin_lock(&fs->lock);
+ *pwd = fs->pwd;
+ path_get(pwd);
+ spin_unlock(&fs->lock);
+}
+
+static inline void get_fs_root_and_pwd(struct fs_struct *fs, struct path *root,
+ struct path *pwd)
+{
+ spin_lock(&fs->lock);
+ *root = fs->root;
+ path_get(root);
+ *pwd = fs->pwd;
+ path_get(pwd);
+ spin_unlock(&fs->lock);
+}
+
#endif /* _LINUX_FS_STRUCT_H */
* (C) Copyright 2005 Robert Love
*/
-#include <linux/dnotify.h>
-#include <linux/inotify.h>
#include <linux/fsnotify_backend.h>
#include <linux/audit.h>
#include <linux/slab.h>
* fsnotify_d_instantiate - instantiate a dentry for inode
* Called with dcache_lock held.
*/
-static inline void fsnotify_d_instantiate(struct dentry *entry,
- struct inode *inode)
+static inline void fsnotify_d_instantiate(struct dentry *dentry,
+ struct inode *inode)
{
- __fsnotify_d_instantiate(entry, inode);
-
- inotify_d_instantiate(entry, inode);
+ __fsnotify_d_instantiate(dentry, inode);
}
/* Notify this dentry's parent about a child's events. */
-static inline void fsnotify_parent(struct dentry *dentry, __u32 mask)
+static inline void fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
{
- __fsnotify_parent(dentry, mask);
+ if (!dentry)
+ dentry = path->dentry;
+
+ __fsnotify_parent(path, dentry, mask);
+}
- inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
+/* simple call site for access decisions */
+static inline int fsnotify_perm(struct file *file, int mask)
+{
+ struct path *path = &file->f_path;
+ struct inode *inode = path->dentry->d_inode;
+ __u32 fsnotify_mask = 0;
+
+ if (file->f_mode & FMODE_NONOTIFY)
+ return 0;
+ if (!(mask & (MAY_READ | MAY_OPEN)))
+ return 0;
+ if (mask & MAY_OPEN)
+ fsnotify_mask = FS_OPEN_PERM;
+ else if (mask & MAY_READ)
+ fsnotify_mask = FS_ACCESS_PERM;
+ else
+ BUG();
+
+ return fsnotify(inode, fsnotify_mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
}
/*
- * fsnotify_d_move - entry has been moved
- * Called with dcache_lock and entry->d_lock held.
+ * fsnotify_d_move - dentry has been moved
+ * Called with dcache_lock and dentry->d_lock held.
*/
-static inline void fsnotify_d_move(struct dentry *entry)
+static inline void fsnotify_d_move(struct dentry *dentry)
{
/*
- * On move we need to update entry->d_flags to indicate if the new parent
- * cares about events from this entry.
+ * On move we need to update dentry->d_flags to indicate if the new parent
+ * cares about events from this dentry.
*/
- __fsnotify_update_dcache_flags(entry);
-
- inotify_d_move(entry);
+ __fsnotify_update_dcache_flags(dentry);
}
/*
*/
static inline void fsnotify_link_count(struct inode *inode)
{
- inotify_inode_queue_event(inode, IN_ATTRIB, 0, NULL, NULL);
-
fsnotify(inode, FS_ATTRIB, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
}
* fsnotify_move - file old_name at old_dir was moved to new_name at new_dir
*/
static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
- const char *old_name,
+ const unsigned char *old_name,
int isdir, struct inode *target, struct dentry *moved)
{
struct inode *source = moved->d_inode;
- u32 in_cookie = inotify_get_cookie();
u32 fs_cookie = fsnotify_get_cookie();
__u32 old_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_FROM);
__u32 new_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_TO);
- const char *new_name = moved->d_name.name;
+ const unsigned char *new_name = moved->d_name.name;
if (old_dir == new_dir)
old_dir_mask |= FS_DN_RENAME;
if (isdir) {
- isdir = IN_ISDIR;
old_dir_mask |= FS_IN_ISDIR;
new_dir_mask |= FS_IN_ISDIR;
}
- inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir, in_cookie, old_name,
- source);
- inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, in_cookie, new_name,
- source);
-
fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name, fs_cookie);
fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name, fs_cookie);
- if (target) {
- inotify_inode_queue_event(target, IN_DELETE_SELF, 0, NULL, NULL);
- inotify_inode_is_dead(target);
-
- /* this is really a link_count change not a removal */
+ if (target)
fsnotify_link_count(target);
- }
- if (source) {
- inotify_inode_queue_event(source, IN_MOVE_SELF, 0, NULL, NULL);
+ if (source)
fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE, NULL, 0);
- }
audit_inode_child(moved, new_dir);
}
__fsnotify_inode_delete(inode);
}
+/*
+ * fsnotify_vfsmount_delete - a vfsmount is being destroyed, clean up is needed
+ */
+static inline void fsnotify_vfsmount_delete(struct vfsmount *mnt)
+{
+ __fsnotify_vfsmount_delete(mnt);
+}
+
/*
* fsnotify_nameremove - a filename was removed from a directory
*/
if (isdir)
mask |= FS_IN_ISDIR;
- fsnotify_parent(dentry, mask);
+ fsnotify_parent(NULL, dentry, mask);
}
/*
*/
static inline void fsnotify_inoderemove(struct inode *inode)
{
- inotify_inode_queue_event(inode, IN_DELETE_SELF, 0, NULL, NULL);
- inotify_inode_is_dead(inode);
-
fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
__fsnotify_inode_delete(inode);
}
*/
static inline void fsnotify_create(struct inode *inode, struct dentry *dentry)
{
- inotify_inode_queue_event(inode, IN_CREATE, 0, dentry->d_name.name,
- dentry->d_inode);
audit_inode_child(dentry, inode);
fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
*/
static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct dentry *new_dentry)
{
- inotify_inode_queue_event(dir, IN_CREATE, 0, new_dentry->d_name.name,
- inode);
fsnotify_link_count(inode);
audit_inode_child(new_dentry, dir);
__u32 mask = (FS_CREATE | FS_IN_ISDIR);
struct inode *d_inode = dentry->d_inode;
- inotify_inode_queue_event(inode, mask, 0, dentry->d_name.name, d_inode);
audit_inode_child(dentry, inode);
fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
/*
* fsnotify_access - file was read
*/
-static inline void fsnotify_access(struct dentry *dentry)
+static inline void fsnotify_access(struct file *file)
{
- struct inode *inode = dentry->d_inode;
+ struct path *path = &file->f_path;
+ struct inode *inode = path->dentry->d_inode;
__u32 mask = FS_ACCESS;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
-
- fsnotify_parent(dentry, mask);
- fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+ if (!(file->f_mode & FMODE_NONOTIFY)) {
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ }
}
/*
* fsnotify_modify - file was modified
*/
-static inline void fsnotify_modify(struct dentry *dentry)
+static inline void fsnotify_modify(struct file *file)
{
- struct inode *inode = dentry->d_inode;
+ struct path *path = &file->f_path;
+ struct inode *inode = path->dentry->d_inode;
__u32 mask = FS_MODIFY;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
-
- fsnotify_parent(dentry, mask);
- fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+ if (!(file->f_mode & FMODE_NONOTIFY)) {
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ }
}
/*
* fsnotify_open - file was opened
*/
-static inline void fsnotify_open(struct dentry *dentry)
+static inline void fsnotify_open(struct file *file)
{
- struct inode *inode = dentry->d_inode;
+ struct path *path = &file->f_path;
+ struct inode *inode = path->dentry->d_inode;
__u32 mask = FS_OPEN;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
-
- fsnotify_parent(dentry, mask);
- fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+ if (!(file->f_mode & FMODE_NONOTIFY)) {
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ }
}
/*
*/
static inline void fsnotify_close(struct file *file)
{
- struct dentry *dentry = file->f_path.dentry;
- struct inode *inode = dentry->d_inode;
+ struct path *path = &file->f_path;
+ struct inode *inode = file->f_path.dentry->d_inode;
fmode_t mode = file->f_mode;
__u32 mask = (mode & FMODE_WRITE) ? FS_CLOSE_WRITE : FS_CLOSE_NOWRITE;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
-
- fsnotify_parent(dentry, mask);
- fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
+ if (!(file->f_mode & FMODE_NONOTIFY)) {
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ }
}
/*
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
-
- fsnotify_parent(dentry, mask);
+ fsnotify_parent(NULL, dentry, mask);
fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
}
if (mask) {
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
- fsnotify_parent(dentry, mask);
+ fsnotify_parent(NULL, dentry, mask);
fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
}
}
-#if defined(CONFIG_INOTIFY) || defined(CONFIG_FSNOTIFY) /* notify helpers */
+#if defined(CONFIG_FSNOTIFY) /* notify helpers */
/*
* fsnotify_oldname_init - save off the old filename before we change it
*/
-static inline const char *fsnotify_oldname_init(const char *name)
+static inline const unsigned char *fsnotify_oldname_init(const unsigned char *name)
{
return kstrdup(name, GFP_KERNEL);
}
/*
* fsnotify_oldname_free - free the name we got from fsnotify_oldname_init
*/
-static inline void fsnotify_oldname_free(const char *old_name)
+static inline void fsnotify_oldname_free(const unsigned char *old_name)
{
kfree(old_name);
}
-#else /* CONFIG_INOTIFY || CONFIG_FSNOTIFY */
+#else /* CONFIG_FSNOTIFY */
-static inline const char *fsnotify_oldname_init(const char *name)
+static inline const char *fsnotify_oldname_init(const unsigned char *name)
{
return NULL;
}
-static inline void fsnotify_oldname_free(const char *old_name)
+static inline void fsnotify_oldname_free(const unsigned char *old_name)
{
}
-#endif /* ! CONFIG_INOTIFY */
+#endif /* CONFIG_FSNOTIFY */
#endif /* _LINUX_FS_NOTIFY_H */
#define FS_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
#define FS_IN_IGNORED 0x00008000 /* last inotify event here */
+#define FS_OPEN_PERM 0x00010000 /* open event in an permission hook */
+#define FS_ACCESS_PERM 0x00020000 /* access event in a permissions hook */
+
+#define FS_EXCL_UNLINK 0x04000000 /* do not send events if object is unlinked */
#define FS_IN_ISDIR 0x40000000 /* event occurred against dir */
#define FS_IN_ONESHOT 0x80000000 /* only send event once */
FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE |\
FS_DELETE)
-/* listeners that hard code group numbers near the top */
-#define DNOTIFY_GROUP_NUM UINT_MAX
-#define INOTIFY_GROUP_NUM (DNOTIFY_GROUP_NUM-1)
+#define FS_MOVE (FS_MOVED_FROM | FS_MOVED_TO)
+
+#define ALL_FSNOTIFY_EVENTS (FS_ACCESS | FS_MODIFY | FS_ATTRIB | \
+ FS_CLOSE_WRITE | FS_CLOSE_NOWRITE | FS_OPEN | \
+ FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE | \
+ FS_DELETE | FS_DELETE_SELF | FS_MOVE_SELF | \
+ FS_UNMOUNT | FS_Q_OVERFLOW | FS_IN_IGNORED | \
+ FS_OPEN_PERM | FS_ACCESS_PERM | FS_EXCL_UNLINK | \
+ FS_IN_ISDIR | FS_IN_ONESHOT | FS_DN_RENAME | \
+ FS_DN_MULTISHOT | FS_EVENT_ON_CHILD)
struct fsnotify_group;
struct fsnotify_event;
-struct fsnotify_mark_entry;
+struct fsnotify_mark;
struct fsnotify_event_private_data;
/*
* valid group and inode to use to clean up.
*/
struct fsnotify_ops {
- bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode, __u32 mask);
- int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event);
+ bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
+ __u32 mask, void *data, int data_type);
+ int (*handle_event)(struct fsnotify_group *group,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
+ struct fsnotify_event *event);
void (*free_group_priv)(struct fsnotify_group *group);
- void (*freeing_mark)(struct fsnotify_mark_entry *entry, struct fsnotify_group *group);
+ void (*freeing_mark)(struct fsnotify_mark *mark, struct fsnotify_group *group);
void (*free_event_priv)(struct fsnotify_event_private_data *priv);
};
* everything will be cleaned up.
*/
struct fsnotify_group {
- /*
- * global list of all groups receiving events from fsnotify.
- * anchored by fsnotify_groups and protected by either fsnotify_grp_mutex
- * or fsnotify_grp_srcu depending on write vs read.
- */
- struct list_head group_list;
-
- /*
- * Defines all of the event types in which this group is interested.
- * This mask is a bitwise OR of the FS_* events from above. Each time
- * this mask changes for a group (if it changes) the correct functions
- * must be called to update the global structures which indicate global
- * interest in event types.
- */
- __u32 mask;
-
/*
* How the refcnt is used is up to each group. When the refcnt hits 0
* fsnotify will clean up all of the resources associated with this group.
* closed.
*/
atomic_t refcnt; /* things with interest in this group */
- unsigned int group_num; /* simply prevents accidental group collision */
const struct fsnotify_ops *ops; /* how this group handles things */
unsigned int q_len; /* events on the queue */
unsigned int max_events; /* maximum events allowed on the list */
- /* stores all fastapth entries assoc with this group so they can be cleaned on unregister */
- spinlock_t mark_lock; /* protect mark_entries list */
- atomic_t num_marks; /* 1 for each mark entry and 1 for not being
+ /* stores all fastpath marks assoc with this group so they can be cleaned on unregister */
+ spinlock_t mark_lock; /* protect marks_list */
+ atomic_t num_marks; /* 1 for each mark and 1 for not being
* past the point of no return when freeing
* a group */
- struct list_head mark_entries; /* all inode mark entries for this group */
-
- /* prevents double list_del of group_list. protected by global fsnotify_grp_mutex */
- bool on_group_list;
+ struct list_head marks_list; /* all inode marks for this group */
/* groups can define private fields here or use the void *private */
union {
struct user_struct *user;
} inotify_data;
#endif
+#ifdef CONFIG_FANOTIFY
+ struct fanotify_group_private_data {
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ /* allows a group to block waiting for a userspace response */
+ struct mutex access_mutex;
+ struct list_head access_list;
+ wait_queue_head_t access_waitq;
+#endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
+ int f_flags;
+ } fanotify_data;
+#endif /* CONFIG_FANOTIFY */
};
};
#define FSNOTIFY_EVENT_NONE 0
#define FSNOTIFY_EVENT_PATH 1
#define FSNOTIFY_EVENT_INODE 2
-#define FSNOTIFY_EVENT_FILE 3
int data_type; /* which of the above union we have */
atomic_t refcnt; /* how many groups still are using/need to send this event */
__u32 mask; /* the type of access, bitwise OR for FS_* event types */
u32 sync_cookie; /* used to corrolate events, namely inotify mv events */
- char *file_name;
+ const unsigned char *file_name;
size_t name_len;
+ struct pid *tgid;
+
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ __u32 response; /* userspace answer to question */
+#endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
struct list_head private_data_list; /* groups can store private data here */
};
/*
- * a mark is simply an entry attached to an in core inode which allows an
+ * Inode specific fields in an fsnotify_mark
+ */
+struct fsnotify_inode_mark {
+ struct inode *inode; /* inode this mark is associated with */
+ struct hlist_node i_list; /* list of marks by inode->i_fsnotify_marks */
+ struct list_head free_i_list; /* tmp list used when freeing this mark */
+};
+
+/*
+ * Mount point specific fields in an fsnotify_mark
+ */
+struct fsnotify_vfsmount_mark {
+ struct vfsmount *mnt; /* vfsmount this mark is associated with */
+ struct hlist_node m_list; /* list of marks by inode->i_fsnotify_marks */
+ struct list_head free_m_list; /* tmp list used when freeing this mark */
+};
+
+/*
+ * a mark is simply an object attached to an in core inode which allows an
* fsnotify listener to indicate they are either no longer interested in events
* of a type matching mask or only interested in those events.
*
* (such as dnotify) will flush these when the open fd is closed and not at
* inode eviction or modification.
*/
-struct fsnotify_mark_entry {
- __u32 mask; /* mask this mark entry is for */
+struct fsnotify_mark {
+ __u32 mask; /* mask this mark is for */
/* we hold ref for each i_list and g_list. also one ref for each 'thing'
* in kernel that found and may be using this mark. */
atomic_t refcnt; /* active things looking at this mark */
- struct inode *inode; /* inode this entry is associated with */
- struct fsnotify_group *group; /* group this mark entry is for */
- struct hlist_node i_list; /* list of mark_entries by inode->i_fsnotify_mark_entries */
- struct list_head g_list; /* list of mark_entries by group->i_fsnotify_mark_entries */
- spinlock_t lock; /* protect group, inode, and killme */
- struct list_head free_i_list; /* tmp list used when freeing this mark */
+ struct fsnotify_group *group; /* group this mark is for */
+ struct list_head g_list; /* list of marks by group->i_fsnotify_marks */
+ spinlock_t lock; /* protect group and inode */
+ union {
+ struct fsnotify_inode_mark i;
+ struct fsnotify_vfsmount_mark m;
+ };
+ __u32 ignored_mask; /* events types to ignore */
struct list_head free_g_list; /* tmp list used when freeing this mark */
- void (*free_mark)(struct fsnotify_mark_entry *entry); /* called on final put+free */
+#define FSNOTIFY_MARK_FLAG_INODE 0x01
+#define FSNOTIFY_MARK_FLAG_VFSMOUNT 0x02
+#define FSNOTIFY_MARK_FLAG_OBJECT_PINNED 0x04
+#define FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY 0x08
+#define FSNOTIFY_MARK_FLAG_ALIVE 0x10
+ unsigned int flags; /* vfsmount or inode mark? */
+ struct list_head destroy_list;
+ void (*free_mark)(struct fsnotify_mark *mark); /* called on final put+free */
};
#ifdef CONFIG_FSNOTIFY
/* called from the vfs helpers */
/* main fsnotify call to send events */
-extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
- const char *name, u32 cookie);
-extern void __fsnotify_parent(struct dentry *dentry, __u32 mask);
+extern int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+ const unsigned char *name, u32 cookie);
+extern void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask);
extern void __fsnotify_inode_delete(struct inode *inode);
+extern void __fsnotify_vfsmount_delete(struct vfsmount *mnt);
extern u32 fsnotify_get_cookie(void);
static inline int fsnotify_inode_watches_children(struct inode *inode)
/* called from fsnotify listeners, such as fanotify or dnotify */
-/* must call when a group changes its ->mask */
-extern void fsnotify_recalc_global_mask(void);
/* get a reference to an existing or create a new group */
-extern struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num,
- __u32 mask,
- const struct fsnotify_ops *ops);
-/* run all marks associated with this group and update group->mask */
-extern void fsnotify_recalc_group_mask(struct fsnotify_group *group);
-/* drop reference on a group from fsnotify_obtain_group */
+extern struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops);
+/* drop reference on a group from fsnotify_alloc_group */
extern void fsnotify_put_group(struct fsnotify_group *group);
/* take a reference to an event */
struct fsnotify_event *event);
/* attach the event to the group notification queue */
-extern int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
- struct fsnotify_event_private_data *priv);
+extern struct fsnotify_event *fsnotify_add_notify_event(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ struct fsnotify_event_private_data *priv,
+ struct fsnotify_event *(*merge)(struct list_head *,
+ struct fsnotify_event *));
/* true if the group notification queue is empty */
extern bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group);
/* return, but do not dequeue the first event on the notification queue */
/* functions used to manipulate the marks attached to inodes */
+/* run all marks associated with a vfsmount and update mnt->mnt_fsnotify_mask */
+extern void fsnotify_recalc_vfsmount_mask(struct vfsmount *mnt);
/* run all marks associated with an inode and update inode->i_fsnotify_mask */
extern void fsnotify_recalc_inode_mask(struct inode *inode);
-extern void fsnotify_init_mark(struct fsnotify_mark_entry *entry, void (*free_mark)(struct fsnotify_mark_entry *entry));
+extern void fsnotify_init_mark(struct fsnotify_mark *mark, void (*free_mark)(struct fsnotify_mark *mark));
/* find (and take a reference) to a mark associated with group and inode */
-extern struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *group, struct inode *inode);
+extern struct fsnotify_mark *fsnotify_find_inode_mark(struct fsnotify_group *group, struct inode *inode);
+/* find (and take a reference) to a mark associated with group and vfsmount */
+extern struct fsnotify_mark *fsnotify_find_vfsmount_mark(struct fsnotify_group *group, struct vfsmount *mnt);
+/* copy the values from old into new */
+extern void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old);
+/* set the ignored_mask of a mark */
+extern void fsnotify_set_mark_ignored_mask_locked(struct fsnotify_mark *mark, __u32 mask);
+/* set the mask of a mark (might pin the object into memory */
+extern void fsnotify_set_mark_mask_locked(struct fsnotify_mark *mark, __u32 mask);
/* attach the mark to both the group and the inode */
-extern int fsnotify_add_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group, struct inode *inode);
+extern int fsnotify_add_mark(struct fsnotify_mark *mark, struct fsnotify_group *group,
+ struct inode *inode, struct vfsmount *mnt, int allow_dups);
/* given a mark, flag it to be freed when all references are dropped */
-extern void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry);
+extern void fsnotify_destroy_mark(struct fsnotify_mark *mark);
+/* run all the marks in a group, and clear all of the vfsmount marks */
+extern void fsnotify_clear_vfsmount_marks_by_group(struct fsnotify_group *group);
+/* run all the marks in a group, and clear all of the inode marks */
+extern void fsnotify_clear_inode_marks_by_group(struct fsnotify_group *group);
+/* run all the marks in a group, and clear all of the marks where mark->flags & flags is true*/
+extern void fsnotify_clear_marks_by_group_flags(struct fsnotify_group *group, unsigned int flags);
/* run all the marks in a group, and flag them to be freed */
extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group);
-extern void fsnotify_get_mark(struct fsnotify_mark_entry *entry);
-extern void fsnotify_put_mark(struct fsnotify_mark_entry *entry);
+extern void fsnotify_get_mark(struct fsnotify_mark *mark);
+extern void fsnotify_put_mark(struct fsnotify_mark *mark);
extern void fsnotify_unmount_inodes(struct list_head *list);
/* put here because inotify does some weird stuff when destroying watches */
extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
- void *data, int data_is, const char *name,
+ void *data, int data_is,
+ const unsigned char *name,
u32 cookie, gfp_t gfp);
+/* fanotify likes to change events after they are on lists... */
+extern struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event);
+extern int fsnotify_replace_event(struct fsnotify_event_holder *old_holder,
+ struct fsnotify_event *new_event);
+
#else
-static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
- const char *name, u32 cookie)
-{}
+static inline int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+ const unsigned char *name, u32 cookie)
+{
+ return 0;
+}
-static inline void __fsnotify_parent(struct dentry *dentry, __u32 mask)
+static inline void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
{}
static inline void __fsnotify_inode_delete(struct inode *inode)
{}
+static inline void __fsnotify_vfsmount_delete(struct vfsmount *mnt)
+{}
+
static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
{}
struct gpio_keys_button *buttons;
int nbuttons;
unsigned int rep:1; /* enable input subsystem auto repeat */
+ int (*enable)(struct device *dev);
+ void (*disable)(struct device *dev);
};
#endif
#define _LINUX_HUGETLB_H
#include <linux/fs.h>
+#include <linux/hugetlb_inline.h>
struct ctl_table;
struct user_struct;
int PageHuge(struct page *page);
-static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
-{
- return vma->vm_flags & VM_HUGETLB;
-}
-
void reset_vma_resv_huge_pages(struct vm_area_struct *vma);
int hugetlb_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
int hugetlb_overcommit_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
struct vm_area_struct *vma,
int acctflags);
void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed);
+void __isolate_hwpoisoned_huge_page(struct page *page);
extern unsigned long hugepages_treat_as_movable;
extern const unsigned long hugetlb_zero, hugetlb_infinity;
return 0;
}
-static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
-{
- return 0;
-}
-
static inline void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
{
}
#define is_hugepage_only_range(mm, addr, len) 0
#define hugetlb_free_pgd_range(tlb, addr, end, floor, ceiling) ({BUG(); 0; })
#define hugetlb_fault(mm, vma, addr, flags) ({ BUG(); 0; })
+#define huge_pte_offset(mm, address) 0
+#define __isolate_hwpoisoned_huge_page(page) 0
#define hugetlb_change_protection(vma, address, end, newprot)
--- /dev/null
+#ifndef _LINUX_HUGETLB_INLINE_H
+#define _LINUX_HUGETLB_INLINE_H
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#include <linux/mm.h>
+
+static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
+{
+ return vma->vm_flags & VM_HUGETLB;
+}
+
+#else
+
+static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
+{
+ return 0;
+}
+
+#endif
+
+#endif
--- /dev/null
+/*
+ *
+ * i2c-mux.h - functions for the i2c-bus mux support
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ * Michael Lawnick <michael.lawnick.ext@nsn.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _LINUX_I2C_MUX_H
+#define _LINUX_I2C_MUX_H
+
+#ifdef __KERNEL__
+
+/*
+ * Called to create a i2c bus on a multiplexed bus segment.
+ * The mux_dev and chan_id parameters are passed to the select
+ * and deselect callback functions to perform hardware-specific
+ * mux control.
+ */
+struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
+ void *mux_dev, u32 force_nr, u32 chan_id,
+ int (*select) (struct i2c_adapter *,
+ void *mux_dev, u32 chan_id),
+ int (*deselect) (struct i2c_adapter *,
+ void *mux_dev, u32 chan_id));
+
+int i2c_del_mux_adapter(struct i2c_adapter *adap);
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_I2C_MUX_H */
#include <linux/of.h> /* for struct device_node */
extern struct bus_type i2c_bus_type;
+extern struct device_type i2c_adapter_type;
/* --- General options ------------------------------------------------ */
* @shutdown: Callback for device shutdown
* @suspend: Callback for device suspend
* @resume: Callback for device resume
+ * @alert: Alert callback, for example for the SMBus alert protocol
* @command: Callback for bus-wide signaling (optional)
* @driver: Device driver model driver
* @id_table: List of I2C devices supported by this driver
* @addr: stored in i2c_client.addr
* @platform_data: stored in i2c_client.dev.platform_data
* @archdata: copied into i2c_client.dev.archdata
+ * @of_node: pointer to OpenFirmware device node
* @irq: stored in i2c_client.irq
*
* I2C doesn't actually support hardware probing, although controllers and
/* If you don't know the exact address of an I2C device, use this variant
* instead, which can probe for device presence in a list of possible
- * addresses.
+ * addresses. The "probe" callback function is optional. If it is provided,
+ * it must return 1 on successful probe, 0 otherwise. If it is not provided,
+ * a default probing method is used.
*/
extern struct i2c_client *
i2c_new_probed_device(struct i2c_adapter *adap,
struct i2c_board_info *info,
- unsigned short const *addr_list);
+ unsigned short const *addr_list,
+ int (*probe)(struct i2c_adapter *, unsigned short addr));
+
+/* Common custom probe functions */
+extern int i2c_probe_func_quick_read(struct i2c_adapter *, unsigned short addr);
/* For devices that use several addresses, use i2c_new_dummy() to make
* client handles for the extra addresses.
char name[48];
struct completion dev_released;
+ struct mutex userspace_clients_lock;
struct list_head userspace_clients;
};
#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
dev_set_drvdata(&dev->dev, data);
}
-/**
- * i2c_lock_adapter - Prevent access to an I2C bus segment
- * @adapter: Target I2C bus segment
- */
-static inline void i2c_lock_adapter(struct i2c_adapter *adapter)
+static inline int i2c_parent_is_i2c_adapter(const struct i2c_adapter *adapter)
{
- rt_mutex_lock(&adapter->bus_lock);
+ return adapter->dev.parent != NULL
+ && adapter->dev.parent->bus == &i2c_bus_type
+ && adapter->dev.parent->type == &i2c_adapter_type;
}
-/**
- * i2c_unlock_adapter - Reauthorize access to an I2C bus segment
- * @adapter: Target I2C bus segment
- */
-static inline void i2c_unlock_adapter(struct i2c_adapter *adapter)
-{
- rt_mutex_unlock(&adapter->bus_lock);
-}
+/* Adapter locking functions, exported for shared pin cases */
+void i2c_lock_adapter(struct i2c_adapter *);
+void i2c_unlock_adapter(struct i2c_adapter *);
/*flags for the client struct: */
#define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */
--- /dev/null
+/*
+ * Platform Data for LTC4245 hardware monitor chip
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef LINUX_LTC4245_H
+#define LINUX_LTC4245_H
+
+#include <linux/types.h>
+
+struct ltc4245_platform_data {
+ bool use_extra_gpios;
+};
+
+#endif /* LINUX_LTC4245_H */
--- /dev/null
+/*
+ *
+ * pca954x.h - I2C multiplexer/switch support
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ * Michael Lawnick <michael.lawnick.ext@nsn.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef _LINUX_I2C_PCA954X_H
+#define _LINUX_I2C_PCA954X_H
+
+/* Platform data for the PCA954x I2C multiplexers */
+
+/* Per channel initialisation data:
+ * @adap_id: bus number for the adapter. 0 = don't care
+ * @deselect_on_exit: set this entry to 1, if your H/W needs deselection
+ * of this channel after transaction.
+ *
+ */
+struct pca954x_platform_mode {
+ int adap_id;
+ unsigned int deselect_on_exit:1;
+};
+
+/* Per mux/switch data, used with i2c_register_board_info */
+struct pca954x_platform_data {
+ struct pca954x_platform_mode *modes;
+ int num_modes;
+};
+
+#endif /* _LINUX_I2C_PCA954X_H */
--- /dev/null
+/*
+ * Driver for the Semtech SX150x I2C GPIO Expanders
+ *
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __LINUX_I2C_SX150X_H
+#define __LINUX_I2C_SX150X_H
+
+/**
+ * struct sx150x_platform_data - config data for SX150x driver
+ * @gpio_base: The index number of the first GPIO assigned to this
+ * GPIO expander. The expander will create a block of
+ * consecutively numbered gpios beginning at the given base,
+ * with the size of the block depending on the model of the
+ * expander chip.
+ * @oscio_is_gpo: If set to true, the driver will configure OSCIO as a GPO
+ * instead of as an oscillator, increasing the size of the
+ * GP(I)O pool created by this expander by one. The
+ * output-only GPO pin will be added at the end of the block.
+ * @io_pullup_ena: A bit-mask which enables or disables the pull-up resistor
+ * for each IO line in the expander. Setting the bit at
+ * position n will enable the pull-up for the IO at
+ * the corresponding offset. For chips with fewer than
+ * 16 IO pins, high-end bits are ignored.
+ * @io_pulldn_ena: A bit-mask which enables-or disables the pull-down
+ * resistor for each IO line in the expander. Setting the
+ * bit at position n will enable the pull-down for the IO at
+ * the corresponding offset. For chips with fewer than
+ * 16 IO pins, high-end bits are ignored.
+ * @io_open_drain_ena: A bit-mask which enables-or disables open-drain
+ * operation for each IO line in the expander. Setting the
+ * bit at position n enables open-drain operation for
+ * the IO at the corresponding offset. Clearing the bit
+ * enables regular push-pull operation for that IO.
+ * For chips with fewer than 16 IO pins, high-end bits
+ * are ignored.
+ * @io_polarity: A bit-mask which enables polarity inversion for each IO line
+ * in the expander. Setting the bit at position n inverts
+ * the polarity of that IO line, while clearing it results
+ * in normal polarity. For chips with fewer than 16 IO pins,
+ * high-end bits are ignored.
+ * @irq_summary: The 'summary IRQ' line to which the GPIO expander's INT line
+ * is connected, via which it reports interrupt events
+ * across all GPIO lines. This must be a real,
+ * pre-existing IRQ line.
+ * Setting this value < 0 disables the irq_chip functionality
+ * of the driver.
+ * @irq_base: The first 'virtual IRQ' line at which our block of GPIO-based
+ * IRQ lines will appear. Similarly to gpio_base, the expander
+ * will create a block of irqs beginning at this number.
+ * This value is ignored if irq_summary is < 0.
+ */
+struct sx150x_platform_data {
+ unsigned gpio_base;
+ bool oscio_is_gpo;
+ u16 io_pullup_ena;
+ u16 io_pulldn_ena;
+ u16 io_open_drain_ena;
+ u16 io_polarity;
+ int irq_summary;
+ unsigned irq_base;
+};
+
+#endif /* __LINUX_I2C_SX150X_H */
/* special flags */
#define IN_ONLYDIR 0x01000000 /* only watch the path if it is a directory */
#define IN_DONT_FOLLOW 0x02000000 /* don't follow a sym link */
+#define IN_EXCL_UNLINK 0x04000000 /* exclude events on unlinked objects */
#define IN_MASK_ADD 0x20000000 /* add to the mask of an already existing watch */
#define IN_ISDIR 0x40000000 /* event occurred against dir */
#define IN_ONESHOT 0x80000000 /* only send event once */
#define IN_NONBLOCK O_NONBLOCK
#ifdef __KERNEL__
-
-#include <linux/dcache.h>
-#include <linux/fs.h>
-
-/*
- * struct inotify_watch - represents a watch request on a specific inode
- *
- * h_list is protected by ih->mutex of the associated inotify_handle.
- * i_list, mask are protected by inode->inotify_mutex of the associated inode.
- * ih, inode, and wd are never written to once the watch is created.
- *
- * Callers must use the established inotify interfaces to access inotify_watch
- * contents. The content of this structure is private to the inotify
- * implementation.
- */
-struct inotify_watch {
- struct list_head h_list; /* entry in inotify_handle's list */
- struct list_head i_list; /* entry in inode's list */
- atomic_t count; /* reference count */
- struct inotify_handle *ih; /* associated inotify handle */
- struct inode *inode; /* associated inode */
- __s32 wd; /* watch descriptor */
- __u32 mask; /* event mask for this watch */
-};
-
-struct inotify_operations {
- void (*handle_event)(struct inotify_watch *, u32, u32, u32,
- const char *, struct inode *);
- void (*destroy_watch)(struct inotify_watch *);
-};
-
-#ifdef CONFIG_INOTIFY
-
-/* Kernel API for producing events */
-
-extern void inotify_d_instantiate(struct dentry *, struct inode *);
-extern void inotify_d_move(struct dentry *);
-extern void inotify_inode_queue_event(struct inode *, __u32, __u32,
- const char *, struct inode *);
-extern void inotify_dentry_parent_queue_event(struct dentry *, __u32, __u32,
- const char *);
-extern void inotify_unmount_inodes(struct list_head *);
-extern void inotify_inode_is_dead(struct inode *);
-extern u32 inotify_get_cookie(void);
-
-/* Kernel Consumer API */
-
-extern struct inotify_handle *inotify_init(const struct inotify_operations *);
-extern void inotify_init_watch(struct inotify_watch *);
-extern void inotify_destroy(struct inotify_handle *);
-extern __s32 inotify_find_watch(struct inotify_handle *, struct inode *,
- struct inotify_watch **);
-extern __s32 inotify_find_update_watch(struct inotify_handle *, struct inode *,
- u32);
-extern __s32 inotify_add_watch(struct inotify_handle *, struct inotify_watch *,
- struct inode *, __u32);
-extern __s32 inotify_clone_watch(struct inotify_watch *, struct inotify_watch *);
-extern void inotify_evict_watch(struct inotify_watch *);
-extern int inotify_rm_watch(struct inotify_handle *, struct inotify_watch *);
-extern int inotify_rm_wd(struct inotify_handle *, __u32);
-extern void inotify_remove_watch_locked(struct inotify_handle *,
- struct inotify_watch *);
-extern void get_inotify_watch(struct inotify_watch *);
-extern void put_inotify_watch(struct inotify_watch *);
-extern int pin_inotify_watch(struct inotify_watch *);
-extern void unpin_inotify_watch(struct inotify_watch *);
-
-#else
-
-static inline void inotify_d_instantiate(struct dentry *dentry,
- struct inode *inode)
-{
-}
-
-static inline void inotify_d_move(struct dentry *dentry)
-{
-}
-
-static inline void inotify_inode_queue_event(struct inode *inode,
- __u32 mask, __u32 cookie,
- const char *filename,
- struct inode *n_inode)
-{
-}
-
-static inline void inotify_dentry_parent_queue_event(struct dentry *dentry,
- __u32 mask, __u32 cookie,
- const char *filename)
-{
-}
-
-static inline void inotify_unmount_inodes(struct list_head *list)
-{
-}
-
-static inline void inotify_inode_is_dead(struct inode *inode)
-{
-}
-
-static inline u32 inotify_get_cookie(void)
-{
- return 0;
-}
-
-static inline struct inotify_handle *inotify_init(const struct inotify_operations *ops)
-{
- return ERR_PTR(-EOPNOTSUPP);
-}
-
-static inline void inotify_init_watch(struct inotify_watch *watch)
-{
-}
-
-static inline void inotify_destroy(struct inotify_handle *ih)
-{
-}
-
-static inline __s32 inotify_find_watch(struct inotify_handle *ih, struct inode *inode,
- struct inotify_watch **watchp)
-{
- return -EOPNOTSUPP;
-}
-
-static inline __s32 inotify_find_update_watch(struct inotify_handle *ih,
- struct inode *inode, u32 mask)
-{
- return -EOPNOTSUPP;
-}
-
-static inline __s32 inotify_add_watch(struct inotify_handle *ih,
- struct inotify_watch *watch,
- struct inode *inode, __u32 mask)
-{
- return -EOPNOTSUPP;
-}
-
-static inline int inotify_rm_watch(struct inotify_handle *ih,
- struct inotify_watch *watch)
-{
- return -EOPNOTSUPP;
-}
-
-static inline int inotify_rm_wd(struct inotify_handle *ih, __u32 wd)
-{
- return -EOPNOTSUPP;
-}
-
-static inline void inotify_remove_watch_locked(struct inotify_handle *ih,
- struct inotify_watch *watch)
-{
-}
-
-static inline void get_inotify_watch(struct inotify_watch *watch)
-{
-}
-
-static inline void put_inotify_watch(struct inotify_watch *watch)
-{
-}
-
-extern inline int pin_inotify_watch(struct inotify_watch *watch)
-{
- return 0;
-}
-
-extern inline void unpin_inotify_watch(struct inotify_watch *watch)
-{
-}
-
-#endif /* CONFIG_INOTIFY */
-
-#endif /* __KERNEL __ */
+#include <linux/sysctl.h>
+extern struct ctl_table inotify_table[]; /* for sysctl */
+
+#define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
+ IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
+ IN_MOVED_TO | IN_CREATE | IN_DELETE | \
+ IN_DELETE_SELF | IN_MOVE_SELF | IN_UNMOUNT | \
+ IN_Q_OVERFLOW | IN_IGNORED | IN_ONLYDIR | \
+ IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \
+ IN_ISDIR | IN_ONESHOT)
+
+#endif
#endif /* _LINUX_INOTIFY_H */
#define REP_DELAY 0x00
#define REP_PERIOD 0x01
#define REP_MAX 0x01
+#define REP_CNT (REP_MAX+1)
/*
* Sounds
* @repeat_key: stores key code of the last key pressed; used to implement
* software autorepeat
* @timer: timer for software autorepeat
- * @abs: current values for reports from absolute axes
* @rep: current values for autorepeat parameters (delay, rate)
* @mt: pointer to array of struct input_mt_slot holding current values
* of tracked contacts
* @mtsize: number of MT slots the device uses
* @slot: MT slot currently being transmitted
+ * @absinfo: array of &struct absinfo elements holding information
+ * about absolute axes (current value, min, max, flat, fuzz,
+ * resolution)
* @key: reflects current state of device's keys/buttons
* @led: reflects current state of device's LEDs
* @snd: reflects current state of sound effects
* @sw: reflects current state of device's switches
- * @absmax: maximum values for events coming from absolute axes
- * @absmin: minimum values for events coming from absolute axes
- * @absfuzz: describes noisiness for axes
- * @absflat: size of the center flat position (used by joydev)
- * @absres: resolution used for events coming form absolute axes
* @open: this method is called when the very first user calls
* input_open_device(). The driver must prepare the device
* to start generating events (start polling thread,
unsigned int repeat_key;
struct timer_list timer;
- int abs[ABS_CNT];
- int rep[REP_MAX + 1];
+ int rep[REP_CNT];
struct input_mt_slot *mt;
int mtsize;
int slot;
+ struct input_absinfo *absinfo;
+
unsigned long key[BITS_TO_LONGS(KEY_CNT)];
unsigned long led[BITS_TO_LONGS(LED_CNT)];
unsigned long snd[BITS_TO_LONGS(SND_CNT)];
unsigned long sw[BITS_TO_LONGS(SW_CNT)];
- int absmax[ABS_CNT];
- int absmin[ABS_CNT];
- int absfuzz[ABS_CNT];
- int absflat[ABS_CNT];
- int absres[ABS_CNT];
-
int (*open)(struct input_dev *dev);
void (*close)(struct input_dev *dev);
int (*flush)(struct input_dev *dev, struct file *file);
dev->hint_events_per_packet = n_events;
}
-static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
-{
- dev->absmin[axis] = min;
- dev->absmax[axis] = max;
- dev->absfuzz[axis] = fuzz;
- dev->absflat[axis] = flat;
-
- dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
+void input_alloc_absinfo(struct input_dev *dev);
+void input_set_abs_params(struct input_dev *dev, unsigned int axis,
+ int min, int max, int fuzz, int flat);
+
+#define INPUT_GENERATE_ABS_ACCESSORS(_suffix, _item) \
+static inline int input_abs_get_##_suffix(struct input_dev *dev, \
+ unsigned int axis) \
+{ \
+ return dev->absinfo ? dev->absinfo[axis]._item : 0; \
+} \
+ \
+static inline void input_abs_set_##_suffix(struct input_dev *dev, \
+ unsigned int axis, int val) \
+{ \
+ input_alloc_absinfo(dev); \
+ if (dev->absinfo) \
+ dev->absinfo[axis]._item = val; \
}
+INPUT_GENERATE_ABS_ACCESSORS(val, value)
+INPUT_GENERATE_ABS_ACCESSORS(min, minimum)
+INPUT_GENERATE_ABS_ACCESSORS(max, maximum)
+INPUT_GENERATE_ABS_ACCESSORS(fuzz, fuzz)
+INPUT_GENERATE_ABS_ACCESSORS(flat, flat)
+INPUT_GENERATE_ABS_ACCESSORS(res, resolution)
+
int input_get_keycode(struct input_dev *dev,
unsigned int scancode, unsigned int *keycode);
int input_set_keycode(struct input_dev *dev,
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/page.h>
-#include <asm/iomap.h>
/*
* The io_mapping mechanism provides an abstraction for mapping
#ifdef CONFIG_HAVE_ATOMIC_IOMAP
+#include <asm/iomap.h>
+
struct io_mapping {
resource_size_t base;
unsigned long size;
unsigned long magic;
unsigned int brdnr;
unsigned int brdtype;
- unsigned int state;
+ unsigned long state;
unsigned int nrpanels;
unsigned int nrports;
unsigned int nrdevs;
/*
* JFFS2 -- Journalling Flash File System, Version 2.
*
- * Copyright (C) 2001-2003 Red Hat, Inc.
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
--- /dev/null
+
+#ifndef __LINUX_JZ4740_ADC
+#define __LINUX_JZ4740_ADC
+
+#include <linux/device.h>
+
+/*
+ * jz4740_adc_set_config - Configure a JZ4740 adc device
+ * @dev: Pointer to a jz4740-adc device
+ * @mask: Mask for the config value to be set
+ * @val: Value to be set
+ *
+ * This function can be used by the JZ4740 ADC mfd cells to configure their
+ * options in the shared config register.
+*/
+int jz4740_adc_set_config(struct device *dev, uint32_t mask, uint32_t val);
+
+#define JZ_ADC_CONFIG_SPZZ BIT(31)
+#define JZ_ADC_CONFIG_EX_IN BIT(30)
+#define JZ_ADC_CONFIG_DNUM_MASK (0x7 << 16)
+#define JZ_ADC_CONFIG_DMA_ENABLE BIT(15)
+#define JZ_ADC_CONFIG_XYZ_MASK (0x2 << 13)
+#define JZ_ADC_CONFIG_SAMPLE_NUM_MASK (0x7 << 10)
+#define JZ_ADC_CONFIG_CLKDIV_MASK (0xf << 5)
+#define JZ_ADC_CONFIG_BAT_MB BIT(4)
+
+#define JZ_ADC_CONFIG_DNUM(dnum) ((dnum) << 16)
+#define JZ_ADC_CONFIG_XYZ_OFFSET(dnum) ((xyz) << 13)
+#define JZ_ADC_CONFIG_SAMPLE_NUM(x) ((x) << 10)
+#define JZ_ADC_CONFIG_CLKDIV(div) ((div) << 5)
+
+#endif
};
extern struct atomic_notifier_head panic_notifier_list;
-extern long (*panic_blink)(long time);
+extern long (*panic_blink)(int state);
NORET_TYPE void panic(const char * fmt, ...)
__attribute__ ((NORET_AND format (printf, 1, 2))) __cold;
extern void oops_enter(void);
extern void oops_exit(void);
+void print_oops_end_marker(void);
extern int oops_may_print(void);
NORET_TYPE void do_exit(long error_code)
ATTRIB_NORET;
}
#endif
+/*
+ * Dummy printk for disabled debugging statements to use whilst maintaining
+ * gcc's format and side-effect checking.
+ */
+static inline __attribute__ ((format (printf, 1, 2)))
+int no_printk(const char *s, ...) { return 0; }
+
extern int printk_needs_cpu(int cpu);
extern void printk_tick(void);
/*
- * A generic kernel FIFO implementation.
+ * A generic kernel FIFO implementation
*
- * Copyright (C) 2009 Stefani Seibold <stefani@seibold.net>
- * Copyright (C) 2004 Stelian Pop <stelian@popies.net>
+ * Copyright (C) 2009/2010 Stefani Seibold <stefani@seibold.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*
*/
+#ifndef _LINUX_KFIFO_H
+#define _LINUX_KFIFO_H
+
/*
- * Howto porting drivers to the new generic fifo API:
+ * How to porting drivers to the new generic FIFO API:
*
* - Modify the declaration of the "struct kfifo *" object into a
* in-place "struct kfifo" object
* passed as the first argument to this functions
* - Replace the use of __kfifo_put into kfifo_in and __kfifo_get
* into kfifo_out
- * - Replace the use of kfifo_put into kfifo_in_locked and kfifo_get
- * into kfifo_out_locked
+ * - Replace the use of kfifo_put into kfifo_in_spinlocked and kfifo_get
+ * into kfifo_out_spinlocked
* Note: the spinlock pointer formerly passed to kfifo_init/kfifo_alloc
- * must be passed now to the kfifo_in_locked and kfifo_out_locked
- * as the last parameter.
- * - All formerly name __kfifo_* functions has been renamed into kfifo_*
+ * must be passed now to the kfifo_in_spinlocked and kfifo_out_spinlocked
+ * as the last parameter
+ * - The formerly __kfifo_* functions are renamed into kfifo_*
*/
-#ifndef _LINUX_KFIFO_H
-#define _LINUX_KFIFO_H
+/*
+ * Note about locking : There is no locking required until only * one reader
+ * and one writer is using the fifo and no kfifo_reset() will be * called
+ * kfifo_reset_out() can be safely used, until it will be only called
+ * in the reader thread.
+ * For multiple writer and one reader there is only a need to lock the writer.
+ * And vice versa for only one writer and multiple reader there is only a need
+ * to lock the reader.
+ */
#include <linux/kernel.h>
#include <linux/spinlock.h>
-
-struct kfifo {
- unsigned char *buffer; /* the buffer holding the data */
- unsigned int size; /* the size of the allocated buffer */
- unsigned int in; /* data is added at offset (in % size) */
- unsigned int out; /* data is extracted from off. (out % size) */
+#include <linux/stddef.h>
+#include <linux/scatterlist.h>
+
+struct __kfifo {
+ unsigned int in;
+ unsigned int out;
+ unsigned int mask;
+ unsigned int esize;
+ void *data;
};
-/*
- * Macros for declaration and initialization of the kfifo datatype
- */
-
-/* helper macro */
-#define __kfifo_initializer(s, b) \
- (struct kfifo) { \
- .size = s, \
- .in = 0, \
- .out = 0, \
- .buffer = b \
+#define __STRUCT_KFIFO_COMMON(datatype, recsize, ptrtype) \
+ union { \
+ struct __kfifo kfifo; \
+ datatype *type; \
+ char (*rectype)[recsize]; \
+ ptrtype *ptr; \
+ const ptrtype *ptr_const; \
}
-/**
- * DECLARE_KFIFO - macro to declare a kfifo and the associated buffer
- * @name: name of the declared kfifo datatype
- * @size: size of the fifo buffer. Must be a power of two.
- *
- * Note1: the macro can be used inside struct or union declaration
- * Note2: the macro creates two objects:
- * A kfifo object with the given name and a buffer for the kfifo
- * object named name##kfifo_buffer
- */
-#define DECLARE_KFIFO(name, size) \
-union { \
- struct kfifo name; \
- unsigned char name##kfifo_buffer[size + sizeof(struct kfifo)]; \
+#define __STRUCT_KFIFO(type, size, recsize, ptrtype) \
+{ \
+ __STRUCT_KFIFO_COMMON(type, recsize, ptrtype); \
+ type buf[((size < 2) || (size & (size - 1))) ? -1 : size]; \
}
-/**
- * INIT_KFIFO - Initialize a kfifo declared by DECLARE_KFIFO
- * @name: name of the declared kfifo datatype
+#define STRUCT_KFIFO(type, size) \
+ struct __STRUCT_KFIFO(type, size, 0, type)
+
+#define __STRUCT_KFIFO_PTR(type, recsize, ptrtype) \
+{ \
+ __STRUCT_KFIFO_COMMON(type, recsize, ptrtype); \
+ type buf[0]; \
+}
+
+#define STRUCT_KFIFO_PTR(type) \
+ struct __STRUCT_KFIFO_PTR(type, 0, type)
+
+/*
+ * define compatibility "struct kfifo" for dynamic allocated fifos
*/
-#define INIT_KFIFO(name) \
- name = __kfifo_initializer(sizeof(name##kfifo_buffer) - \
- sizeof(struct kfifo), \
- name##kfifo_buffer + sizeof(struct kfifo))
+struct kfifo __STRUCT_KFIFO_PTR(unsigned char, 0, void);
-/**
- * DEFINE_KFIFO - macro to define and initialize a kfifo
- * @name: name of the declared kfifo datatype
- * @size: size of the fifo buffer. Must be a power of two.
- *
- * Note1: the macro can be used for global and local kfifo data type variables
- * Note2: the macro creates two objects:
- * A kfifo object with the given name and a buffer for the kfifo
- * object named name##kfifo_buffer
+#define STRUCT_KFIFO_REC_1(size) \
+ struct __STRUCT_KFIFO(unsigned char, size, 1, void)
+
+#define STRUCT_KFIFO_REC_2(size) \
+ struct __STRUCT_KFIFO(unsigned char, size, 2, void)
+
+/*
+ * define kfifo_rec types
*/
-#define DEFINE_KFIFO(name, size) \
- unsigned char name##kfifo_buffer[size]; \
- struct kfifo name = __kfifo_initializer(size, name##kfifo_buffer)
+struct kfifo_rec_ptr_1 __STRUCT_KFIFO_PTR(unsigned char, 1, void);
+struct kfifo_rec_ptr_2 __STRUCT_KFIFO_PTR(unsigned char, 2, void);
-extern void kfifo_init(struct kfifo *fifo, void *buffer,
- unsigned int size);
-extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size,
- gfp_t gfp_mask);
-extern void kfifo_free(struct kfifo *fifo);
-extern unsigned int kfifo_in(struct kfifo *fifo,
- const void *from, unsigned int len);
-extern __must_check unsigned int kfifo_out(struct kfifo *fifo,
- void *to, unsigned int len);
-extern __must_check unsigned int kfifo_out_peek(struct kfifo *fifo,
- void *to, unsigned int len, unsigned offset);
+/*
+ * helper macro to distinguish between real in place fifo where the fifo
+ * array is a part of the structure and the fifo type where the array is
+ * outside of the fifo structure.
+ */
+#define __is_kfifo_ptr(fifo) (sizeof(*fifo) == sizeof(struct __kfifo))
/**
- * kfifo_initialized - Check if kfifo is initialized.
- * @fifo: fifo to check
- * Return %true if FIFO is initialized, otherwise %false.
- * Assumes the fifo was 0 before.
+ * DECLARE_KFIFO_PTR - macro to declare a fifo pointer object
+ * @fifo: name of the declared fifo
+ * @type: type of the fifo elements
*/
-static inline bool kfifo_initialized(struct kfifo *fifo)
-{
- return fifo->buffer != NULL;
-}
+#define DECLARE_KFIFO_PTR(fifo, type) STRUCT_KFIFO_PTR(type) fifo
/**
- * kfifo_reset - removes the entire FIFO contents
- * @fifo: the fifo to be emptied.
+ * DECLARE_KFIFO - macro to declare a fifo object
+ * @fifo: name of the declared fifo
+ * @type: type of the fifo elements
+ * @size: the number of elements in the fifo, this must be a power of 2
*/
-static inline void kfifo_reset(struct kfifo *fifo)
-{
- fifo->in = fifo->out = 0;
-}
+#define DECLARE_KFIFO(fifo, type, size) STRUCT_KFIFO(type, size) fifo
/**
- * kfifo_reset_out - skip FIFO contents
- * @fifo: the fifo to be emptied.
- */
-static inline void kfifo_reset_out(struct kfifo *fifo)
-{
- smp_mb();
- fifo->out = fifo->in;
-}
+ * INIT_KFIFO - Initialize a fifo declared by DECLARE_KFIFO
+ * @fifo: name of the declared fifo datatype
+ */
+#define INIT_KFIFO(fifo) \
+(void)({ \
+ typeof(&(fifo)) __tmp = &(fifo); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ __kfifo->in = 0; \
+ __kfifo->out = 0; \
+ __kfifo->mask = __is_kfifo_ptr(__tmp) ? 0 : ARRAY_SIZE(__tmp->buf) - 1;\
+ __kfifo->esize = sizeof(*__tmp->buf); \
+ __kfifo->data = __is_kfifo_ptr(__tmp) ? NULL : __tmp->buf; \
+})
/**
- * kfifo_size - returns the size of the fifo in bytes
- * @fifo: the fifo to be used.
- */
-static inline __must_check unsigned int kfifo_size(struct kfifo *fifo)
+ * DEFINE_KFIFO - macro to define and initialize a fifo
+ * @fifo: name of the declared fifo datatype
+ * @type: type of the fifo elements
+ * @size: the number of elements in the fifo, this must be a power of 2
+ *
+ * Note: the macro can be used for global and local fifo data type variables.
+ */
+#define DEFINE_KFIFO(fifo, type, size) \
+ DECLARE_KFIFO(fifo, type, size) = \
+ (typeof(fifo)) { \
+ { \
+ { \
+ .in = 0, \
+ .out = 0, \
+ .mask = __is_kfifo_ptr(&(fifo)) ? \
+ 0 : \
+ ARRAY_SIZE((fifo).buf) - 1, \
+ .esize = sizeof(*(fifo).buf), \
+ .data = __is_kfifo_ptr(&(fifo)) ? \
+ NULL : \
+ (fifo).buf, \
+ } \
+ } \
+ }
+
+
+static inline unsigned int __must_check
+__kfifo_must_check_helper(unsigned int val)
{
- return fifo->size;
+ return val;
}
/**
- * kfifo_len - returns the number of used bytes in the FIFO
- * @fifo: the fifo to be used.
+ * kfifo_initialized - Check if the fifo is initialized
+ * @fifo: address of the fifo to check
+ *
+ * Return %true if fifo is initialized, otherwise %false.
+ * Assumes the fifo was 0 before.
*/
-static inline unsigned int kfifo_len(struct kfifo *fifo)
-{
- register unsigned int out;
-
- out = fifo->out;
- smp_rmb();
- return fifo->in - out;
-}
+#define kfifo_initialized(fifo) ((fifo)->kfifo.mask)
/**
- * kfifo_is_empty - returns true if the fifo is empty
- * @fifo: the fifo to be used.
+ * kfifo_esize - returns the size of the element managed by the fifo
+ * @fifo: address of the fifo to be used
*/
-static inline __must_check int kfifo_is_empty(struct kfifo *fifo)
-{
- return fifo->in == fifo->out;
-}
+#define kfifo_esize(fifo) ((fifo)->kfifo.esize)
/**
- * kfifo_is_full - returns true if the fifo is full
- * @fifo: the fifo to be used.
+ * kfifo_recsize - returns the size of the record length field
+ * @fifo: address of the fifo to be used
*/
-static inline __must_check int kfifo_is_full(struct kfifo *fifo)
-{
- return kfifo_len(fifo) == kfifo_size(fifo);
-}
+#define kfifo_recsize(fifo) (sizeof(*(fifo)->rectype))
/**
- * kfifo_avail - returns the number of bytes available in the FIFO
- * @fifo: the fifo to be used.
+ * kfifo_size - returns the size of the fifo in elements
+ * @fifo: address of the fifo to be used
*/
-static inline __must_check unsigned int kfifo_avail(struct kfifo *fifo)
-{
- return kfifo_size(fifo) - kfifo_len(fifo);
-}
+#define kfifo_size(fifo) ((fifo)->kfifo.mask + 1)
/**
- * kfifo_in_locked - puts some data into the FIFO using a spinlock for locking
- * @fifo: the fifo to be used.
- * @from: the data to be added.
- * @n: the length of the data to be added.
- * @lock: pointer to the spinlock to use for locking.
+ * kfifo_reset - removes the entire fifo content
+ * @fifo: address of the fifo to be used
*
- * This function copies at most @n bytes from the @from buffer into
- * the FIFO depending on the free space, and returns the number of
- * bytes copied.
+ * Note: usage of kfifo_reset() is dangerous. It should be only called when the
+ * fifo is exclusived locked or when it is secured that no other thread is
+ * accessing the fifo.
*/
-static inline unsigned int kfifo_in_locked(struct kfifo *fifo,
- const void *from, unsigned int n, spinlock_t *lock)
-{
- unsigned long flags;
- unsigned int ret;
-
- spin_lock_irqsave(lock, flags);
-
- ret = kfifo_in(fifo, from, n);
-
- spin_unlock_irqrestore(lock, flags);
-
- return ret;
-}
+#define kfifo_reset(fifo) \
+(void)({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ __tmp->kfifo.in = __tmp->kfifo.out = 0; \
+})
/**
- * kfifo_out_locked - gets some data from the FIFO using a spinlock for locking
- * @fifo: the fifo to be used.
- * @to: where the data must be copied.
- * @n: the size of the destination buffer.
- * @lock: pointer to the spinlock to use for locking.
+ * kfifo_reset_out - skip fifo content
+ * @fifo: address of the fifo to be used
*
- * This function copies at most @n bytes from the FIFO into the
- * @to buffer and returns the number of copied bytes.
- */
-static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo,
- void *to, unsigned int n, spinlock_t *lock)
-{
- unsigned long flags;
- unsigned int ret;
-
- spin_lock_irqsave(lock, flags);
-
- ret = kfifo_out(fifo, to, n);
-
- spin_unlock_irqrestore(lock, flags);
-
- return ret;
-}
-
-extern void kfifo_skip(struct kfifo *fifo, unsigned int len);
-
-extern __must_check int kfifo_from_user(struct kfifo *fifo,
- const void __user *from, unsigned int n, unsigned *lenout);
-
-extern __must_check int kfifo_to_user(struct kfifo *fifo,
- void __user *to, unsigned int n, unsigned *lenout);
-
-/*
- * __kfifo_add_out internal helper function for updating the out offset
+ * Note: The usage of kfifo_reset_out() is safe until it will be only called
+ * from the reader thread and there is only one concurrent reader. Otherwise
+ * it is dangerous and must be handled in the same way as kfifo_reset().
*/
-static inline void __kfifo_add_out(struct kfifo *fifo,
- unsigned int off)
-{
- smp_mb();
- fifo->out += off;
-}
+#define kfifo_reset_out(fifo) \
+(void)({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ __tmp->kfifo.out = __tmp->kfifo.in; \
+})
-/*
- * __kfifo_add_in internal helper function for updating the in offset
+/**
+ * kfifo_len - returns the number of used elements in the fifo
+ * @fifo: address of the fifo to be used
*/
-static inline void __kfifo_add_in(struct kfifo *fifo,
- unsigned int off)
-{
- smp_wmb();
- fifo->in += off;
-}
+#define kfifo_len(fifo) \
+({ \
+ typeof(fifo + 1) __tmpl = (fifo); \
+ __tmpl->kfifo.in - __tmpl->kfifo.out; \
+})
-/*
- * __kfifo_off internal helper function for calculating the index of a
- * given offeset
+/**
+ * kfifo_is_empty - returns true if the fifo is empty
+ * @fifo: address of the fifo to be used
*/
-static inline unsigned int __kfifo_off(struct kfifo *fifo, unsigned int off)
-{
- return off & (fifo->size - 1);
-}
+#define kfifo_is_empty(fifo) \
+({ \
+ typeof(fifo + 1) __tmpq = (fifo); \
+ __tmpq->kfifo.in == __tmpq->kfifo.out; \
+})
-/*
- * __kfifo_peek_n internal helper function for determinate the length of
- * the next record in the fifo
+/**
+ * kfifo_is_full - returns true if the fifo is full
+ * @fifo: address of the fifo to be used
*/
-static inline unsigned int __kfifo_peek_n(struct kfifo *fifo,
- unsigned int recsize)
-{
-#define __KFIFO_GET(fifo, off, shift) \
- ((fifo)->buffer[__kfifo_off((fifo), (fifo)->out+(off))] << (shift))
+#define kfifo_is_full(fifo) \
+({ \
+ typeof(fifo + 1) __tmpq = (fifo); \
+ kfifo_len(__tmpq) > __tmpq->kfifo.mask; \
+})
- unsigned int l;
+/**
+ * kfifo_avail - returns the number of unused elements in the fifo
+ * @fifo: address of the fifo to be used
+ */
+#define kfifo_avail(fifo) \
+__kfifo_must_check_helper( \
+({ \
+ typeof(fifo + 1) __tmpq = (fifo); \
+ const size_t __recsize = sizeof(*__tmpq->rectype); \
+ unsigned int __avail = kfifo_size(__tmpq) - kfifo_len(__tmpq); \
+ (__recsize) ? ((__avail <= __recsize) ? 0 : \
+ __kfifo_max_r(__avail - __recsize, __recsize)) : \
+ __avail; \
+}) \
+)
- l = __KFIFO_GET(fifo, 0, 0);
+/**
+ * kfifo_skip - skip output data
+ * @fifo: address of the fifo to be used
+ */
+#define kfifo_skip(fifo) \
+(void)({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ if (__recsize) \
+ __kfifo_skip_r(__kfifo, __recsize); \
+ else \
+ __kfifo->out++; \
+})
- if (--recsize)
- l |= __KFIFO_GET(fifo, 1, 8);
+/**
+ * kfifo_peek_len - gets the size of the next fifo record
+ * @fifo: address of the fifo to be used
+ *
+ * This function returns the size of the next fifo record in number of bytes.
+ */
+#define kfifo_peek_len(fifo) \
+__kfifo_must_check_helper( \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ (!__recsize) ? kfifo_len(__tmp) * sizeof(*__tmp->type) : \
+ __kfifo_len_r(__kfifo, __recsize); \
+}) \
+)
- return l;
-#undef __KFIFO_GET
-}
+/**
+ * kfifo_alloc - dynamically allocates a new fifo buffer
+ * @fifo: pointer to the fifo
+ * @size: the number of elements in the fifo, this must be a power of 2
+ * @gfp_mask: get_free_pages mask, passed to kmalloc()
+ *
+ * This macro dynamically allocates a new fifo buffer.
+ *
+ * The numer of elements will be rounded-up to a power of 2.
+ * The fifo will be release with kfifo_free().
+ * Return 0 if no error, otherwise an error code.
+ */
+#define kfifo_alloc(fifo, size, gfp_mask) \
+__kfifo_must_check_helper( \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ __is_kfifo_ptr(__tmp) ? \
+ __kfifo_alloc(__kfifo, size, sizeof(*__tmp->type), gfp_mask) : \
+ -EINVAL; \
+}) \
+)
-/*
- * __kfifo_poke_n internal helper function for storing the length of
- * the next record into the fifo
+/**
+ * kfifo_free - frees the fifo
+ * @fifo: the fifo to be freed
*/
-static inline void __kfifo_poke_n(struct kfifo *fifo,
- unsigned int recsize, unsigned int n)
-{
-#define __KFIFO_PUT(fifo, off, val, shift) \
- ( \
- (fifo)->buffer[__kfifo_off((fifo), (fifo)->in+(off))] = \
- (unsigned char)((val) >> (shift)) \
- )
+#define kfifo_free(fifo) \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ if (__is_kfifo_ptr(__tmp)) \
+ __kfifo_free(__kfifo); \
+})
- __KFIFO_PUT(fifo, 0, n, 0);
+/**
+ * kfifo_init - initialize a fifo using a preallocated buffer
+ * @fifo: the fifo to assign the buffer
+ * @buffer: the preallocated buffer to be used
+ * @size: the size of the internal buffer, this have to be a power of 2
+ *
+ * This macro initialize a fifo using a preallocated buffer.
+ *
+ * The numer of elements will be rounded-up to a power of 2.
+ * Return 0 if no error, otherwise an error code.
+ */
+#define kfifo_init(fifo, buffer, size) \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ __is_kfifo_ptr(__tmp) ? \
+ __kfifo_init(__kfifo, buffer, size, sizeof(*__tmp->type)) : \
+ -EINVAL; \
+})
- if (--recsize)
- __KFIFO_PUT(fifo, 1, n, 8);
-#undef __KFIFO_PUT
-}
+/**
+ * kfifo_put - put data into the fifo
+ * @fifo: address of the fifo to be used
+ * @val: the data to be added
+ *
+ * This macro copies the given value into the fifo.
+ * It returns 0 if the fifo was full. Otherwise it returns the number
+ * processed elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define kfifo_put(fifo, val) \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ typeof(val + 1) __val = (val); \
+ unsigned int __ret; \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ if (0) { \
+ typeof(__tmp->ptr_const) __dummy __attribute__ ((unused)); \
+ __dummy = (typeof(__val))NULL; \
+ } \
+ if (__recsize) \
+ __ret = __kfifo_in_r(__kfifo, __val, sizeof(*__val), \
+ __recsize); \
+ else { \
+ __ret = !kfifo_is_full(__tmp); \
+ if (__ret) { \
+ (__is_kfifo_ptr(__tmp) ? \
+ ((typeof(__tmp->type))__kfifo->data) : \
+ (__tmp->buf) \
+ )[__kfifo->in & __tmp->kfifo.mask] = \
+ *(typeof(__tmp->type))__val; \
+ smp_wmb(); \
+ __kfifo->in++; \
+ } \
+ } \
+ __ret; \
+})
-/*
- * __kfifo_in_... internal functions for put date into the fifo
- * do not call it directly, use kfifo_in_rec() instead
- */
-extern unsigned int __kfifo_in_n(struct kfifo *fifo,
- const void *from, unsigned int n, unsigned int recsize);
+/**
+ * kfifo_get - get data from the fifo
+ * @fifo: address of the fifo to be used
+ * @val: the var where to store the data to be added
+ *
+ * This macro reads the data from the fifo.
+ * It returns 0 if the fifo was empty. Otherwise it returns the number
+ * processed elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define kfifo_get(fifo, val) \
+__kfifo_must_check_helper( \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ typeof(val + 1) __val = (val); \
+ unsigned int __ret; \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ if (0) \
+ __val = (typeof(__tmp->ptr))0; \
+ if (__recsize) \
+ __ret = __kfifo_out_r(__kfifo, __val, sizeof(*__val), \
+ __recsize); \
+ else { \
+ __ret = !kfifo_is_empty(__tmp); \
+ if (__ret) { \
+ *(typeof(__tmp->type))__val = \
+ (__is_kfifo_ptr(__tmp) ? \
+ ((typeof(__tmp->type))__kfifo->data) : \
+ (__tmp->buf) \
+ )[__kfifo->out & __tmp->kfifo.mask]; \
+ smp_wmb(); \
+ __kfifo->out++; \
+ } \
+ } \
+ __ret; \
+}) \
+)
-extern unsigned int __kfifo_in_generic(struct kfifo *fifo,
- const void *from, unsigned int n, unsigned int recsize);
+/**
+ * kfifo_peek - get data from the fifo without removing
+ * @fifo: address of the fifo to be used
+ * @val: the var where to store the data to be added
+ *
+ * This reads the data from the fifo without removing it from the fifo.
+ * It returns 0 if the fifo was empty. Otherwise it returns the number
+ * processed elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define kfifo_peek(fifo, val) \
+__kfifo_must_check_helper( \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ typeof(val + 1) __val = (val); \
+ unsigned int __ret; \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ if (0) \
+ __val = (typeof(__tmp->ptr))NULL; \
+ if (__recsize) \
+ __ret = __kfifo_out_peek_r(__kfifo, __val, sizeof(*__val), \
+ __recsize); \
+ else { \
+ __ret = !kfifo_is_empty(__tmp); \
+ if (__ret) { \
+ *(typeof(__tmp->type))__val = \
+ (__is_kfifo_ptr(__tmp) ? \
+ ((typeof(__tmp->type))__kfifo->data) : \
+ (__tmp->buf) \
+ )[__kfifo->out & __tmp->kfifo.mask]; \
+ smp_wmb(); \
+ } \
+ } \
+ __ret; \
+}) \
+)
-static inline unsigned int __kfifo_in_rec(struct kfifo *fifo,
- const void *from, unsigned int n, unsigned int recsize)
-{
- unsigned int ret;
+/**
+ * kfifo_in - put data into the fifo
+ * @fifo: address of the fifo to be used
+ * @buf: the data to be added
+ * @n: number of elements to be added
+ *
+ * This macro copies the given buffer into the fifo and returns the
+ * number of copied elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define kfifo_in(fifo, buf, n) \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ typeof(buf + 1) __buf = (buf); \
+ unsigned long __n = (n); \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ if (0) { \
+ typeof(__tmp->ptr_const) __dummy __attribute__ ((unused)); \
+ __dummy = (typeof(__buf))NULL; \
+ } \
+ (__recsize) ?\
+ __kfifo_in_r(__kfifo, __buf, __n, __recsize) : \
+ __kfifo_in(__kfifo, __buf, __n); \
+})
- ret = __kfifo_in_n(fifo, from, n, recsize);
+/**
+ * kfifo_in_spinlocked - put data into the fifo using a spinlock for locking
+ * @fifo: address of the fifo to be used
+ * @buf: the data to be added
+ * @n: number of elements to be added
+ * @lock: pointer to the spinlock to use for locking
+ *
+ * This macro copies the given values buffer into the fifo and returns the
+ * number of copied elements.
+ */
+#define kfifo_in_spinlocked(fifo, buf, n, lock) \
+({ \
+ unsigned long __flags; \
+ unsigned int __ret; \
+ spin_lock_irqsave(lock, __flags); \
+ __ret = kfifo_in(fifo, buf, n); \
+ spin_unlock_irqrestore(lock, __flags); \
+ __ret; \
+})
+
+/* alias for kfifo_in_spinlocked, will be removed in a future release */
+#define kfifo_in_locked(fifo, buf, n, lock) \
+ kfifo_in_spinlocked(fifo, buf, n, lock)
- if (likely(ret == 0)) {
- if (recsize)
- __kfifo_poke_n(fifo, recsize, n);
- __kfifo_add_in(fifo, n + recsize);
- }
- return ret;
-}
+/**
+ * kfifo_out - get data from the fifo
+ * @fifo: address of the fifo to be used
+ * @buf: pointer to the storage buffer
+ * @n: max. number of elements to get
+ *
+ * This macro get some data from the fifo and return the numbers of elements
+ * copied.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define kfifo_out(fifo, buf, n) \
+__kfifo_must_check_helper( \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ typeof(buf + 1) __buf = (buf); \
+ unsigned long __n = (n); \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ if (0) { \
+ typeof(__tmp->ptr) __dummy = NULL; \
+ __buf = __dummy; \
+ } \
+ (__recsize) ?\
+ __kfifo_out_r(__kfifo, __buf, __n, __recsize) : \
+ __kfifo_out(__kfifo, __buf, __n); \
+}) \
+)
+
+/**
+ * kfifo_out_spinlocked - get data from the fifo using a spinlock for locking
+ * @fifo: address of the fifo to be used
+ * @buf: pointer to the storage buffer
+ * @n: max. number of elements to get
+ * @lock: pointer to the spinlock to use for locking
+ *
+ * This macro get the data from the fifo and return the numbers of elements
+ * copied.
+ */
+#define kfifo_out_spinlocked(fifo, buf, n, lock) \
+__kfifo_must_check_helper( \
+({ \
+ unsigned long __flags; \
+ unsigned int __ret; \
+ spin_lock_irqsave(lock, __flags); \
+ __ret = kfifo_out(fifo, buf, n); \
+ spin_unlock_irqrestore(lock, __flags); \
+ __ret; \
+}) \
+)
+
+/* alias for kfifo_out_spinlocked, will be removed in a future release */
+#define kfifo_out_locked(fifo, buf, n, lock) \
+ kfifo_out_spinlocked(fifo, buf, n, lock)
/**
- * kfifo_in_rec - puts some record data into the FIFO
- * @fifo: the fifo to be used.
- * @from: the data to be added.
- * @n: the length of the data to be added.
- * @recsize: size of record field
+ * kfifo_from_user - puts some data from user space into the fifo
+ * @fifo: address of the fifo to be used
+ * @from: pointer to the data to be added
+ * @len: the length of the data to be added
+ * @copied: pointer to output variable to store the number of copied bytes
*
- * This function copies @n bytes from the @from into the FIFO and returns
- * the number of bytes which cannot be copied.
- * A returned value greater than the @n value means that the record doesn't
- * fit into the buffer.
+ * This macro copies at most @len bytes from the @from into the
+ * fifo, depending of the available space and returns -EFAULT/0.
*
* Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these functions.
- */
-static inline __must_check unsigned int kfifo_in_rec(struct kfifo *fifo,
- void *from, unsigned int n, unsigned int recsize)
-{
- if (!__builtin_constant_p(recsize))
- return __kfifo_in_generic(fifo, from, n, recsize);
- return __kfifo_in_rec(fifo, from, n, recsize);
-}
+ * writer, you don't need extra locking to use these macro.
+ */
+#define kfifo_from_user(fifo, from, len, copied) \
+__kfifo_must_check_helper( \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ const void __user *__from = (from); \
+ unsigned int __len = (len); \
+ unsigned int *__copied = (copied); \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ (__recsize) ? \
+ __kfifo_from_user_r(__kfifo, __from, __len, __copied, __recsize) : \
+ __kfifo_from_user(__kfifo, __from, __len, __copied); \
+}) \
+)
-/*
- * __kfifo_out_... internal functions for get date from the fifo
- * do not call it directly, use kfifo_out_rec() instead
- */
-extern unsigned int __kfifo_out_n(struct kfifo *fifo,
- void *to, unsigned int reclen, unsigned int recsize);
+/**
+ * kfifo_to_user - copies data from the fifo into user space
+ * @fifo: address of the fifo to be used
+ * @to: where the data must be copied
+ * @len: the size of the destination buffer
+ * @copied: pointer to output variable to store the number of copied bytes
+ *
+ * This macro copies at most @len bytes from the fifo into the
+ * @to buffer and returns -EFAULT/0.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define kfifo_to_user(fifo, to, len, copied) \
+__kfifo_must_check_helper( \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ void __user *__to = (to); \
+ unsigned int __len = (len); \
+ unsigned int *__copied = (copied); \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ (__recsize) ? \
+ __kfifo_to_user_r(__kfifo, __to, __len, __copied, __recsize) : \
+ __kfifo_to_user(__kfifo, __to, __len, __copied); \
+}) \
+)
+
+/**
+ * kfifo_dma_in_prepare - setup a scatterlist for DMA input
+ * @fifo: address of the fifo to be used
+ * @sgl: pointer to the scatterlist array
+ * @nents: number of entries in the scatterlist array
+ * @len: number of elements to transfer
+ *
+ * This macro fills a scatterlist for DMA input.
+ * It returns the number entries in the scatterlist array.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define kfifo_dma_in_prepare(fifo, sgl, nents, len) \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ struct scatterlist *__sgl = (sgl); \
+ int __nents = (nents); \
+ unsigned int __len = (len); \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ (__recsize) ? \
+ __kfifo_dma_in_prepare_r(__kfifo, __sgl, __nents, __len, __recsize) : \
+ __kfifo_dma_in_prepare(__kfifo, __sgl, __nents, __len); \
+})
-extern unsigned int __kfifo_out_generic(struct kfifo *fifo,
- void *to, unsigned int n,
- unsigned int recsize, unsigned int *total);
+/**
+ * kfifo_dma_in_finish - finish a DMA IN operation
+ * @fifo: address of the fifo to be used
+ * @len: number of bytes to received
+ *
+ * This macro finish a DMA IN operation. The in counter will be updated by
+ * the len parameter. No error checking will be done.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define kfifo_dma_in_finish(fifo, len) \
+(void)({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ unsigned int __len = (len); \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ if (__recsize) \
+ __kfifo_dma_in_finish_r(__kfifo, __len, __recsize); \
+ else \
+ __kfifo->in += __len / sizeof(*__tmp->type); \
+})
-static inline unsigned int __kfifo_out_rec(struct kfifo *fifo,
- void *to, unsigned int n, unsigned int recsize,
- unsigned int *total)
-{
- unsigned int l;
-
- if (!recsize) {
- l = n;
- if (total)
- *total = l;
- } else {
- l = __kfifo_peek_n(fifo, recsize);
- if (total)
- *total = l;
- if (n < l)
- return l;
- }
+/**
+ * kfifo_dma_out_prepare - setup a scatterlist for DMA output
+ * @fifo: address of the fifo to be used
+ * @sgl: pointer to the scatterlist array
+ * @nents: number of entries in the scatterlist array
+ * @len: number of elements to transfer
+ *
+ * This macro fills a scatterlist for DMA output which at most @len bytes
+ * to transfer.
+ * It returns the number entries in the scatterlist array.
+ * A zero means there is no space available and the scatterlist is not filled.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define kfifo_dma_out_prepare(fifo, sgl, nents, len) \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ struct scatterlist *__sgl = (sgl); \
+ int __nents = (nents); \
+ unsigned int __len = (len); \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ (__recsize) ? \
+ __kfifo_dma_out_prepare_r(__kfifo, __sgl, __nents, __len, __recsize) : \
+ __kfifo_dma_out_prepare(__kfifo, __sgl, __nents, __len); \
+})
- return __kfifo_out_n(fifo, to, l, recsize);
-}
+/**
+ * kfifo_dma_out_finish - finish a DMA OUT operation
+ * @fifo: address of the fifo to be used
+ * @len: number of bytes transferd
+ *
+ * This macro finish a DMA OUT operation. The out counter will be updated by
+ * the len parameter. No error checking will be done.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define kfifo_dma_out_finish(fifo, len) \
+(void)({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ unsigned int __len = (len); \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ if (__recsize) \
+ __kfifo_dma_out_finish_r(__kfifo, __recsize); \
+ else \
+ __kfifo->out += __len / sizeof(*__tmp->type); \
+})
/**
- * kfifo_out_rec - gets some record data from the FIFO
- * @fifo: the fifo to be used.
- * @to: where the data must be copied.
- * @n: the size of the destination buffer.
- * @recsize: size of record field
- * @total: pointer where the total number of to copied bytes should stored
+ * kfifo_out_peek - gets some data from the fifo
+ * @fifo: address of the fifo to be used
+ * @buf: pointer to the storage buffer
+ * @n: max. number of elements to get
*
- * This function copies at most @n bytes from the FIFO to @to and returns the
- * number of bytes which cannot be copied.
- * A returned value greater than the @n value means that the record doesn't
- * fit into the @to buffer.
+ * This macro get the data from the fifo and return the numbers of elements
+ * copied. The data is not removed from the fifo.
*
* Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these functions.
+ * writer, you don't need extra locking to use these macro.
*/
-static inline __must_check unsigned int kfifo_out_rec(struct kfifo *fifo,
- void *to, unsigned int n, unsigned int recsize,
- unsigned int *total)
+#define kfifo_out_peek(fifo, buf, n) \
+__kfifo_must_check_helper( \
+({ \
+ typeof(fifo + 1) __tmp = (fifo); \
+ typeof(buf + 1) __buf = (buf); \
+ unsigned long __n = (n); \
+ const size_t __recsize = sizeof(*__tmp->rectype); \
+ struct __kfifo *__kfifo = &__tmp->kfifo; \
+ if (0) { \
+ typeof(__tmp->ptr) __dummy __attribute__ ((unused)) = NULL; \
+ __buf = __dummy; \
+ } \
+ (__recsize) ? \
+ __kfifo_out_peek_r(__kfifo, __buf, __n, __recsize) : \
+ __kfifo_out_peek(__kfifo, __buf, __n); \
+}) \
+)
-{
- if (!__builtin_constant_p(recsize))
- return __kfifo_out_generic(fifo, to, n, recsize, total);
- return __kfifo_out_rec(fifo, to, n, recsize, total);
-}
+extern int __kfifo_alloc(struct __kfifo *fifo, unsigned int size,
+ size_t esize, gfp_t gfp_mask);
-/*
- * __kfifo_from_user_... internal functions for transfer from user space into
- * the fifo. do not call it directly, use kfifo_from_user_rec() instead
- */
-extern unsigned int __kfifo_from_user_n(struct kfifo *fifo,
- const void __user *from, unsigned int n, unsigned int recsize);
+extern void __kfifo_free(struct __kfifo *fifo);
-extern unsigned int __kfifo_from_user_generic(struct kfifo *fifo,
- const void __user *from, unsigned int n, unsigned int recsize);
+extern int __kfifo_init(struct __kfifo *fifo, void *buffer,
+ unsigned int size, size_t esize);
-static inline unsigned int __kfifo_from_user_rec(struct kfifo *fifo,
- const void __user *from, unsigned int n, unsigned int recsize)
-{
- unsigned int ret;
+extern unsigned int __kfifo_in(struct __kfifo *fifo,
+ const void *buf, unsigned int len);
- ret = __kfifo_from_user_n(fifo, from, n, recsize);
+extern unsigned int __kfifo_out(struct __kfifo *fifo,
+ void *buf, unsigned int len);
- if (likely(ret == 0)) {
- if (recsize)
- __kfifo_poke_n(fifo, recsize, n);
- __kfifo_add_in(fifo, n + recsize);
- }
- return ret;
-}
+extern int __kfifo_from_user(struct __kfifo *fifo,
+ const void __user *from, unsigned long len, unsigned int *copied);
-/**
- * kfifo_from_user_rec - puts some data from user space into the FIFO
- * @fifo: the fifo to be used.
- * @from: pointer to the data to be added.
- * @n: the length of the data to be added.
- * @recsize: size of record field
- *
- * This function copies @n bytes from the @from into the
- * FIFO and returns the number of bytes which cannot be copied.
- *
- * If the returned value is equal or less the @n value, the copy_from_user()
- * functions has failed. Otherwise the record doesn't fit into the buffer.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these functions.
- */
-static inline __must_check unsigned int kfifo_from_user_rec(struct kfifo *fifo,
- const void __user *from, unsigned int n, unsigned int recsize)
-{
- if (!__builtin_constant_p(recsize))
- return __kfifo_from_user_generic(fifo, from, n, recsize);
- return __kfifo_from_user_rec(fifo, from, n, recsize);
-}
+extern int __kfifo_to_user(struct __kfifo *fifo,
+ void __user *to, unsigned long len, unsigned int *copied);
-/*
- * __kfifo_to_user_... internal functions for transfer fifo data into user space
- * do not call it directly, use kfifo_to_user_rec() instead
- */
-extern unsigned int __kfifo_to_user_n(struct kfifo *fifo,
- void __user *to, unsigned int n, unsigned int reclen,
- unsigned int recsize);
+extern unsigned int __kfifo_dma_in_prepare(struct __kfifo *fifo,
+ struct scatterlist *sgl, int nents, unsigned int len);
-extern unsigned int __kfifo_to_user_generic(struct kfifo *fifo,
- void __user *to, unsigned int n, unsigned int recsize,
- unsigned int *total);
+extern unsigned int __kfifo_dma_out_prepare(struct __kfifo *fifo,
+ struct scatterlist *sgl, int nents, unsigned int len);
-static inline unsigned int __kfifo_to_user_rec(struct kfifo *fifo,
- void __user *to, unsigned int n,
- unsigned int recsize, unsigned int *total)
-{
- unsigned int l;
-
- if (!recsize) {
- l = n;
- if (total)
- *total = l;
- } else {
- l = __kfifo_peek_n(fifo, recsize);
- if (total)
- *total = l;
- if (n < l)
- return l;
- }
+extern unsigned int __kfifo_out_peek(struct __kfifo *fifo,
+ void *buf, unsigned int len);
- return __kfifo_to_user_n(fifo, to, n, l, recsize);
-}
+extern unsigned int __kfifo_in_r(struct __kfifo *fifo,
+ const void *buf, unsigned int len, size_t recsize);
-/**
- * kfifo_to_user_rec - gets data from the FIFO and write it to user space
- * @fifo: the fifo to be used.
- * @to: where the data must be copied.
- * @n: the size of the destination buffer.
- * @recsize: size of record field
- * @total: pointer where the total number of to copied bytes should stored
- *
- * This function copies at most @n bytes from the FIFO to the @to.
- * In case of an error, the function returns the number of bytes which cannot
- * be copied.
- * If the returned value is equal or less the @n value, the copy_to_user()
- * functions has failed. Otherwise the record doesn't fit into the @to buffer.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these functions.
- */
-static inline __must_check unsigned int kfifo_to_user_rec(struct kfifo *fifo,
- void __user *to, unsigned int n, unsigned int recsize,
- unsigned int *total)
-{
- if (!__builtin_constant_p(recsize))
- return __kfifo_to_user_generic(fifo, to, n, recsize, total);
- return __kfifo_to_user_rec(fifo, to, n, recsize, total);
-}
+extern unsigned int __kfifo_out_r(struct __kfifo *fifo,
+ void *buf, unsigned int len, size_t recsize);
-/*
- * __kfifo_peek_... internal functions for peek into the next fifo record
- * do not call it directly, use kfifo_peek_rec() instead
- */
-extern unsigned int __kfifo_peek_generic(struct kfifo *fifo,
- unsigned int recsize);
+extern int __kfifo_from_user_r(struct __kfifo *fifo,
+ const void __user *from, unsigned long len, unsigned int *copied,
+ size_t recsize);
-/**
- * kfifo_peek_rec - gets the size of the next FIFO record data
- * @fifo: the fifo to be used.
- * @recsize: size of record field
- *
- * This function returns the size of the next FIFO record in number of bytes
- */
-static inline __must_check unsigned int kfifo_peek_rec(struct kfifo *fifo,
- unsigned int recsize)
-{
- if (!__builtin_constant_p(recsize))
- return __kfifo_peek_generic(fifo, recsize);
- if (!recsize)
- return kfifo_len(fifo);
- return __kfifo_peek_n(fifo, recsize);
-}
+extern int __kfifo_to_user_r(struct __kfifo *fifo, void __user *to,
+ unsigned long len, unsigned int *copied, size_t recsize);
-/*
- * __kfifo_skip_... internal functions for skip the next fifo record
- * do not call it directly, use kfifo_skip_rec() instead
- */
-extern void __kfifo_skip_generic(struct kfifo *fifo, unsigned int recsize);
+extern unsigned int __kfifo_dma_in_prepare_r(struct __kfifo *fifo,
+ struct scatterlist *sgl, int nents, unsigned int len, size_t recsize);
-static inline void __kfifo_skip_rec(struct kfifo *fifo,
- unsigned int recsize)
-{
- unsigned int l;
+extern void __kfifo_dma_in_finish_r(struct __kfifo *fifo,
+ unsigned int len, size_t recsize);
- if (recsize) {
- l = __kfifo_peek_n(fifo, recsize);
+extern unsigned int __kfifo_dma_out_prepare_r(struct __kfifo *fifo,
+ struct scatterlist *sgl, int nents, unsigned int len, size_t recsize);
- if (l + recsize <= kfifo_len(fifo)) {
- __kfifo_add_out(fifo, l + recsize);
- return;
- }
- }
- kfifo_reset_out(fifo);
-}
+extern void __kfifo_dma_out_finish_r(struct __kfifo *fifo, size_t recsize);
-/**
- * kfifo_skip_rec - skip the next fifo out record
- * @fifo: the fifo to be used.
- * @recsize: size of record field
- *
- * This function skips the next FIFO record
- */
-static inline void kfifo_skip_rec(struct kfifo *fifo,
- unsigned int recsize)
-{
- if (!__builtin_constant_p(recsize))
- __kfifo_skip_generic(fifo, recsize);
- else
- __kfifo_skip_rec(fifo, recsize);
-}
+extern unsigned int __kfifo_len_r(struct __kfifo *fifo, size_t recsize);
-/**
- * kfifo_avail_rec - returns the number of bytes available in a record FIFO
- * @fifo: the fifo to be used.
- * @recsize: size of record field
- */
-static inline __must_check unsigned int kfifo_avail_rec(struct kfifo *fifo,
- unsigned int recsize)
-{
- unsigned int l = kfifo_size(fifo) - kfifo_len(fifo);
+extern unsigned int __kfifo_out_peek_r(struct __kfifo *fifo,
+ void *buf, unsigned int len, size_t recsize);
- return (l > recsize) ? l - recsize : 0;
-}
+extern unsigned int __kfifo_max_r(unsigned int len, size_t recsize);
#endif
--- /dev/null
+/*
+ * Specialised local-global spinlock. Can only be declared as global variables
+ * to avoid overhead and keep things simple (and we don't want to start using
+ * these inside dynamically allocated structures).
+ *
+ * "local/global locks" (lglocks) can be used to:
+ *
+ * - Provide fast exclusive access to per-CPU data, with exclusive access to
+ * another CPU's data allowed but possibly subject to contention, and to
+ * provide very slow exclusive access to all per-CPU data.
+ * - Or to provide very fast and scalable read serialisation, and to provide
+ * very slow exclusive serialisation of data (not necessarily per-CPU data).
+ *
+ * Brlocks are also implemented as a short-hand notation for the latter use
+ * case.
+ *
+ * Copyright 2009, 2010, Nick Piggin, Novell Inc.
+ */
+#ifndef __LINUX_LGLOCK_H
+#define __LINUX_LGLOCK_H
+
+#include <linux/spinlock.h>
+#include <linux/lockdep.h>
+#include <linux/percpu.h>
+
+/* can make br locks by using local lock for read side, global lock for write */
+#define br_lock_init(name) name##_lock_init()
+#define br_read_lock(name) name##_local_lock()
+#define br_read_unlock(name) name##_local_unlock()
+#define br_write_lock(name) name##_global_lock_online()
+#define br_write_unlock(name) name##_global_unlock_online()
+
+#define DECLARE_BRLOCK(name) DECLARE_LGLOCK(name)
+#define DEFINE_BRLOCK(name) DEFINE_LGLOCK(name)
+
+
+#define lg_lock_init(name) name##_lock_init()
+#define lg_local_lock(name) name##_local_lock()
+#define lg_local_unlock(name) name##_local_unlock()
+#define lg_local_lock_cpu(name, cpu) name##_local_lock_cpu(cpu)
+#define lg_local_unlock_cpu(name, cpu) name##_local_unlock_cpu(cpu)
+#define lg_global_lock(name) name##_global_lock()
+#define lg_global_unlock(name) name##_global_unlock()
+#define lg_global_lock_online(name) name##_global_lock_online()
+#define lg_global_unlock_online(name) name##_global_unlock_online()
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#define LOCKDEP_INIT_MAP lockdep_init_map
+
+#define DEFINE_LGLOCK_LOCKDEP(name) \
+ struct lock_class_key name##_lock_key; \
+ struct lockdep_map name##_lock_dep_map; \
+ EXPORT_SYMBOL(name##_lock_dep_map)
+
+#else
+#define LOCKDEP_INIT_MAP(a, b, c, d)
+
+#define DEFINE_LGLOCK_LOCKDEP(name)
+#endif
+
+
+#define DECLARE_LGLOCK(name) \
+ extern void name##_lock_init(void); \
+ extern void name##_local_lock(void); \
+ extern void name##_local_unlock(void); \
+ extern void name##_local_lock_cpu(int cpu); \
+ extern void name##_local_unlock_cpu(int cpu); \
+ extern void name##_global_lock(void); \
+ extern void name##_global_unlock(void); \
+ extern void name##_global_lock_online(void); \
+ extern void name##_global_unlock_online(void); \
+
+#define DEFINE_LGLOCK(name) \
+ \
+ DEFINE_PER_CPU(arch_spinlock_t, name##_lock); \
+ DEFINE_LGLOCK_LOCKDEP(name); \
+ \
+ void name##_lock_init(void) { \
+ int i; \
+ LOCKDEP_INIT_MAP(&name##_lock_dep_map, #name, &name##_lock_key, 0); \
+ for_each_possible_cpu(i) { \
+ arch_spinlock_t *lock; \
+ lock = &per_cpu(name##_lock, i); \
+ *lock = (arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED; \
+ } \
+ } \
+ EXPORT_SYMBOL(name##_lock_init); \
+ \
+ void name##_local_lock(void) { \
+ arch_spinlock_t *lock; \
+ preempt_disable(); \
+ rwlock_acquire_read(&name##_lock_dep_map, 0, 0, _THIS_IP_); \
+ lock = &__get_cpu_var(name##_lock); \
+ arch_spin_lock(lock); \
+ } \
+ EXPORT_SYMBOL(name##_local_lock); \
+ \
+ void name##_local_unlock(void) { \
+ arch_spinlock_t *lock; \
+ rwlock_release(&name##_lock_dep_map, 1, _THIS_IP_); \
+ lock = &__get_cpu_var(name##_lock); \
+ arch_spin_unlock(lock); \
+ preempt_enable(); \
+ } \
+ EXPORT_SYMBOL(name##_local_unlock); \
+ \
+ void name##_local_lock_cpu(int cpu) { \
+ arch_spinlock_t *lock; \
+ preempt_disable(); \
+ rwlock_acquire_read(&name##_lock_dep_map, 0, 0, _THIS_IP_); \
+ lock = &per_cpu(name##_lock, cpu); \
+ arch_spin_lock(lock); \
+ } \
+ EXPORT_SYMBOL(name##_local_lock_cpu); \
+ \
+ void name##_local_unlock_cpu(int cpu) { \
+ arch_spinlock_t *lock; \
+ rwlock_release(&name##_lock_dep_map, 1, _THIS_IP_); \
+ lock = &per_cpu(name##_lock, cpu); \
+ arch_spin_unlock(lock); \
+ preempt_enable(); \
+ } \
+ EXPORT_SYMBOL(name##_local_unlock_cpu); \
+ \
+ void name##_global_lock_online(void) { \
+ int i; \
+ preempt_disable(); \
+ rwlock_acquire(&name##_lock_dep_map, 0, 0, _RET_IP_); \
+ for_each_online_cpu(i) { \
+ arch_spinlock_t *lock; \
+ lock = &per_cpu(name##_lock, i); \
+ arch_spin_lock(lock); \
+ } \
+ } \
+ EXPORT_SYMBOL(name##_global_lock_online); \
+ \
+ void name##_global_unlock_online(void) { \
+ int i; \
+ rwlock_release(&name##_lock_dep_map, 1, _RET_IP_); \
+ for_each_online_cpu(i) { \
+ arch_spinlock_t *lock; \
+ lock = &per_cpu(name##_lock, i); \
+ arch_spin_unlock(lock); \
+ } \
+ preempt_enable(); \
+ } \
+ EXPORT_SYMBOL(name##_global_unlock_online); \
+ \
+ void name##_global_lock(void) { \
+ int i; \
+ preempt_disable(); \
+ rwlock_acquire(&name##_lock_dep_map, 0, 0, _RET_IP_); \
+ for_each_online_cpu(i) { \
+ arch_spinlock_t *lock; \
+ lock = &per_cpu(name##_lock, i); \
+ arch_spin_lock(lock); \
+ } \
+ } \
+ EXPORT_SYMBOL(name##_global_lock); \
+ \
+ void name##_global_unlock(void) { \
+ int i; \
+ rwlock_release(&name##_lock_dep_map, 1, _RET_IP_); \
+ for_each_online_cpu(i) { \
+ arch_spinlock_t *lock; \
+ lock = &per_cpu(name##_lock, i); \
+ arch_spin_unlock(lock); \
+ } \
+ preempt_enable(); \
+ } \
+ EXPORT_SYMBOL(name##_global_unlock);
+#endif
(C) 2001 by Andreas Gruenbacher, <a.gruenbacher@computer.org>
*/
-/* Hardwire the number of additional indexes */
-#define MB_CACHE_INDEXES_COUNT 1
-
struct mb_cache_entry {
struct list_head e_lru_list;
struct mb_cache *e_cache;
struct {
struct list_head o_list;
unsigned int o_key;
- } e_indexes[0];
-};
-
-struct mb_cache_op {
- int (*free)(struct mb_cache_entry *, gfp_t);
+ } e_index;
};
/* Functions on caches */
-struct mb_cache * mb_cache_create(const char *, struct mb_cache_op *, size_t,
- int, int);
+struct mb_cache *mb_cache_create(const char *, int);
void mb_cache_shrink(struct block_device *);
void mb_cache_destroy(struct mb_cache *);
struct mb_cache_entry *mb_cache_entry_alloc(struct mb_cache *, gfp_t);
int mb_cache_entry_insert(struct mb_cache_entry *, struct block_device *,
- sector_t, unsigned int[]);
+ sector_t, unsigned int);
void mb_cache_entry_release(struct mb_cache_entry *);
void mb_cache_entry_free(struct mb_cache_entry *);
struct mb_cache_entry *mb_cache_entry_get(struct mb_cache *,
struct block_device *,
sector_t);
-#if !defined(MB_CACHE_INDEXES_COUNT) || (MB_CACHE_INDEXES_COUNT > 0)
-struct mb_cache_entry *mb_cache_entry_find_first(struct mb_cache *cache, int,
+struct mb_cache_entry *mb_cache_entry_find_first(struct mb_cache *cache,
struct block_device *,
unsigned int);
-struct mb_cache_entry *mb_cache_entry_find_next(struct mb_cache_entry *, int,
+struct mb_cache_entry *mb_cache_entry_find_next(struct mb_cache_entry *,
struct block_device *,
unsigned int);
-#endif
void mem_cgroup_update_file_mapped(struct page *page, int val);
unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
- gfp_t gfp_mask, int nid,
- int zid);
+ gfp_t gfp_mask);
u64 mem_cgroup_get_limit(struct mem_cgroup *mem);
#else /* CONFIG_CGROUP_MEM_RES_CTLR */
static inline
unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
- gfp_t gfp_mask, int nid, int zid)
+ gfp_t gfp_mask)
{
return 0;
}
#define AB8500_NR_IRQS 104
#define AB8500_NUM_IRQ_REGS 13
+#define AB8500_NUM_REGULATORS 15
+
/**
* struct ab8500 - ab8500 internal structure
* @dev: parent device
u8 oldmask[AB8500_NUM_IRQ_REGS];
};
+struct regulator_init_data;
+
/**
* struct ab8500_platform_data - AB8500 platform data
* @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
* @init: board-specific initialization after detection of ab8500
+ * @regulator: machine-specific constraints for regulators
*/
struct ab8500_platform_data {
int irq_base;
void (*init) (struct ab8500 *);
+ struct regulator_init_data *regulator[AB8500_NUM_REGULATORS];
};
extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data);
--- /dev/null
+/*
+ * max8698.h - Voltage regulator driver for the Maxim 8998
+ *
+ * Copyright (C) 2009-2010 Samsung Electrnoics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_MFD_MAX8998_PRIV_H
+#define __LINUX_MFD_MAX8998_PRIV_H
+
+/* MAX 8998 registers */
+enum {
+ MAX8998_REG_IRQ1,
+ MAX8998_REG_IRQ2,
+ MAX8998_REG_IRQ3,
+ MAX8998_REG_IRQ4,
+ MAX8998_REG_IRQM1,
+ MAX8998_REG_IRQM2,
+ MAX8998_REG_IRQM3,
+ MAX8998_REG_IRQM4,
+ MAX8998_REG_STATUS1,
+ MAX8998_REG_STATUS2,
+ MAX8998_REG_STATUSM1,
+ MAX8998_REG_STATUSM2,
+ MAX8998_REG_CHGR1,
+ MAX8998_REG_CHGR2,
+ MAX8998_REG_LDO_ACTIVE_DISCHARGE1,
+ MAX8998_REG_LDO_ACTIVE_DISCHARGE2,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+ MAX8998_REG_ONOFF1,
+ MAX8998_REG_ONOFF2,
+ MAX8998_REG_ONOFF3,
+ MAX8998_REG_ONOFF4,
+ MAX8998_REG_BUCK1_DVSARM1,
+ MAX8998_REG_BUCK1_DVSARM2,
+ MAX8998_REG_BUCK1_DVSARM3,
+ MAX8998_REG_BUCK1_DVSARM4,
+ MAX8998_REG_BUCK2_DVSINT1,
+ MAX8998_REG_BUCK2_DVSINT2,
+ MAX8998_REG_BUCK3,
+ MAX8998_REG_BUCK4,
+ MAX8998_REG_LDO2_LDO3,
+ MAX8998_REG_LDO4,
+ MAX8998_REG_LDO5,
+ MAX8998_REG_LDO6,
+ MAX8998_REG_LDO7,
+ MAX8998_REG_LDO8_LDO9,
+ MAX8998_REG_LDO10_LDO11,
+ MAX8998_REG_LDO12,
+ MAX8998_REG_LDO13,
+ MAX8998_REG_LDO14,
+ MAX8998_REG_LDO15,
+ MAX8998_REG_LDO16,
+ MAX8998_REG_LDO17,
+ MAX8998_REG_BKCHR,
+ MAX8998_REG_LBCNFG1,
+ MAX8998_REG_LBCNFG2,
+};
+
+/**
+ * struct max8998_dev - max8998 master device for sub-drivers
+ * @dev: master device of the chip (can be used to access platform data)
+ * @i2c_client: i2c client private data
+ * @dev_read(): chip register read function
+ * @dev_write(): chip register write function
+ * @dev_update(): chip register update function
+ * @iolock: mutex for serializing io access
+ */
+
+struct max8998_dev {
+ struct device *dev;
+ struct i2c_client *i2c_client;
+ int (*dev_read)(struct max8998_dev *max8998, u8 reg, u8 *dest);
+ int (*dev_write)(struct max8998_dev *max8998, u8 reg, u8 val);
+ int (*dev_update)(struct max8998_dev *max8998, u8 reg, u8 val, u8 mask);
+ struct mutex iolock;
+};
+
+static inline int max8998_read_reg(struct max8998_dev *max8998, u8 reg,
+ u8 *value)
+{
+ return max8998->dev_read(max8998, reg, value);
+}
+
+static inline int max8998_write_reg(struct max8998_dev *max8998, u8 reg,
+ u8 value)
+{
+ return max8998->dev_write(max8998, reg, value);
+}
+
+static inline int max8998_update_reg(struct max8998_dev *max8998, u8 reg,
+ u8 value, u8 mask)
+{
+ return max8998->dev_update(max8998, reg, value, mask);
+}
+
+#endif /* __LINUX_MFD_MAX8998_PRIV_H */
--- /dev/null
+/*
+ * max8698.h - Voltage regulator driver for the Maxim 8998
+ *
+ * Copyright (C) 2009-2010 Samsung Electrnoics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_MFD_MAX8998_H
+#define __LINUX_MFD_MAX8998_H
+
+#include <linux/regulator/machine.h>
+
+/* MAX 8998 regulator ids */
+enum {
+ MAX8998_LDO2 = 2,
+ MAX8998_LDO3,
+ MAX8998_LDO4,
+ MAX8998_LDO5,
+ MAX8998_LDO6,
+ MAX8998_LDO7,
+ MAX8998_LDO8,
+ MAX8998_LDO9,
+ MAX8998_LDO10,
+ MAX8998_LDO11,
+ MAX8998_LDO12,
+ MAX8998_LDO13,
+ MAX8998_LDO14,
+ MAX8998_LDO15,
+ MAX8998_LDO16,
+ MAX8998_LDO17,
+ MAX8998_BUCK1,
+ MAX8998_BUCK2,
+ MAX8998_BUCK3,
+ MAX8998_BUCK4,
+ MAX8998_EN32KHZ_AP,
+ MAX8998_EN32KHZ_CP,
+ MAX8998_ENVICHG,
+ MAX8998_ESAFEOUT1,
+ MAX8998_ESAFEOUT2,
+};
+
+/**
+ * max8998_regulator_data - regulator data
+ * @id: regulator id
+ * @initdata: regulator init data (contraints, supplies, ...)
+ */
+struct max8998_regulator_data {
+ int id;
+ struct regulator_init_data *initdata;
+};
+
+/**
+ * struct max8998_board - packages regulator init data
+ * @num_regulators: number of regultors used
+ * @regulators: array of defined regulators
+ */
+
+struct max8998_platform_data {
+ int num_regulators;
+ struct max8998_regulator_data *regulators;
+};
+
+#endif /* __LINUX_MFD_MAX8998_H */
+++ /dev/null
-/*
- * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * Initial development of this code was funded by
- * Phytec Messtechnik GmbH, http://www.phytec.de
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_MFD_MC13783_PRIV_H
-#define __LINUX_MFD_MC13783_PRIV_H
-
-#include <linux/platform_device.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/mutex.h>
-#include <linux/interrupt.h>
-
-struct mc13783 {
- struct spi_device *spidev;
- struct mutex lock;
- int irq;
- int flags;
-
- irq_handler_t irqhandler[MC13783_NUM_IRQ];
- void *irqdata[MC13783_NUM_IRQ];
-
- /* XXX these should go as platformdata to the regulator subdevice */
- struct mc13783_regulator_init_data *regulators;
- int num_regulators;
-};
-
-#define MC13783_REG_INTERRUPT_STATUS_0 0
-#define MC13783_REG_INTERRUPT_MASK_0 1
-#define MC13783_REG_INTERRUPT_SENSE_0 2
-#define MC13783_REG_INTERRUPT_STATUS_1 3
-#define MC13783_REG_INTERRUPT_MASK_1 4
-#define MC13783_REG_INTERRUPT_SENSE_1 5
-#define MC13783_REG_POWER_UP_MODE_SENSE 6
-#define MC13783_REG_REVISION 7
-#define MC13783_REG_SEMAPHORE 8
-#define MC13783_REG_ARBITRATION_PERIPHERAL_AUDIO 9
-#define MC13783_REG_ARBITRATION_SWITCHERS 10
-#define MC13783_REG_ARBITRATION_REGULATORS_0 11
-#define MC13783_REG_ARBITRATION_REGULATORS_1 12
-#define MC13783_REG_POWER_CONTROL_0 13
-#define MC13783_REG_POWER_CONTROL_1 14
-#define MC13783_REG_POWER_CONTROL_2 15
-#define MC13783_REG_REGEN_ASSIGNMENT 16
-#define MC13783_REG_CONTROL_SPARE 17
-#define MC13783_REG_MEMORY_A 18
-#define MC13783_REG_MEMORY_B 19
-#define MC13783_REG_RTC_TIME 20
-#define MC13783_REG_RTC_ALARM 21
-#define MC13783_REG_RTC_DAY 22
-#define MC13783_REG_RTC_DAY_ALARM 23
-#define MC13783_REG_SWITCHERS_0 24
-#define MC13783_REG_SWITCHERS_1 25
-#define MC13783_REG_SWITCHERS_2 26
-#define MC13783_REG_SWITCHERS_3 27
-#define MC13783_REG_SWITCHERS_4 28
-#define MC13783_REG_SWITCHERS_5 29
-#define MC13783_REG_REGULATOR_SETTING_0 30
-#define MC13783_REG_REGULATOR_SETTING_1 31
-#define MC13783_REG_REGULATOR_MODE_0 32
-#define MC13783_REG_REGULATOR_MODE_1 33
-#define MC13783_REG_POWER_MISCELLANEOUS 34
-#define MC13783_REG_POWER_SPARE 35
-#define MC13783_REG_AUDIO_RX_0 36
-#define MC13783_REG_AUDIO_RX_1 37
-#define MC13783_REG_AUDIO_TX 38
-#define MC13783_REG_AUDIO_SSI_NETWORK 39
-#define MC13783_REG_AUDIO_CODEC 40
-#define MC13783_REG_AUDIO_STEREO_DAC 41
-#define MC13783_REG_AUDIO_SPARE 42
-#define MC13783_REG_ADC_0 43
-#define MC13783_REG_ADC_1 44
-#define MC13783_REG_ADC_2 45
-#define MC13783_REG_ADC_3 46
-#define MC13783_REG_ADC_4 47
-#define MC13783_REG_CHARGER 48
-#define MC13783_REG_USB 49
-#define MC13783_REG_CHARGE_USB_SPARE 50
-#define MC13783_REG_LED_CONTROL_0 51
-#define MC13783_REG_LED_CONTROL_1 52
-#define MC13783_REG_LED_CONTROL_2 53
-#define MC13783_REG_LED_CONTROL_3 54
-#define MC13783_REG_LED_CONTROL_4 55
-#define MC13783_REG_LED_CONTROL_5 56
-#define MC13783_REG_SPARE 57
-#define MC13783_REG_TRIM_0 58
-#define MC13783_REG_TRIM_1 59
-#define MC13783_REG_TEST_0 60
-#define MC13783_REG_TEST_1 61
-#define MC13783_REG_TEST_2 62
-#define MC13783_REG_TEST_3 63
-#define MC13783_REG_NB 64
-
-/*
- * Reg Regulator Mode 0
- */
-#define MC13783_REGCTRL_VAUDIO_EN (1 << 0)
-#define MC13783_REGCTRL_VAUDIO_STBY (1 << 1)
-#define MC13783_REGCTRL_VAUDIO_MODE (1 << 2)
-#define MC13783_REGCTRL_VIOHI_EN (1 << 3)
-#define MC13783_REGCTRL_VIOHI_STBY (1 << 4)
-#define MC13783_REGCTRL_VIOHI_MODE (1 << 5)
-#define MC13783_REGCTRL_VIOLO_EN (1 << 6)
-#define MC13783_REGCTRL_VIOLO_STBY (1 << 7)
-#define MC13783_REGCTRL_VIOLO_MODE (1 << 8)
-#define MC13783_REGCTRL_VDIG_EN (1 << 9)
-#define MC13783_REGCTRL_VDIG_STBY (1 << 10)
-#define MC13783_REGCTRL_VDIG_MODE (1 << 11)
-#define MC13783_REGCTRL_VGEN_EN (1 << 12)
-#define MC13783_REGCTRL_VGEN_STBY (1 << 13)
-#define MC13783_REGCTRL_VGEN_MODE (1 << 14)
-#define MC13783_REGCTRL_VRFDIG_EN (1 << 15)
-#define MC13783_REGCTRL_VRFDIG_STBY (1 << 16)
-#define MC13783_REGCTRL_VRFDIG_MODE (1 << 17)
-#define MC13783_REGCTRL_VRFREF_EN (1 << 18)
-#define MC13783_REGCTRL_VRFREF_STBY (1 << 19)
-#define MC13783_REGCTRL_VRFREF_MODE (1 << 20)
-#define MC13783_REGCTRL_VRFCP_EN (1 << 21)
-#define MC13783_REGCTRL_VRFCP_STBY (1 << 22)
-#define MC13783_REGCTRL_VRFCP_MODE (1 << 23)
-
-/*
- * Reg Regulator Mode 1
- */
-#define MC13783_REGCTRL_VSIM_EN (1 << 0)
-#define MC13783_REGCTRL_VSIM_STBY (1 << 1)
-#define MC13783_REGCTRL_VSIM_MODE (1 << 2)
-#define MC13783_REGCTRL_VESIM_EN (1 << 3)
-#define MC13783_REGCTRL_VESIM_STBY (1 << 4)
-#define MC13783_REGCTRL_VESIM_MODE (1 << 5)
-#define MC13783_REGCTRL_VCAM_EN (1 << 6)
-#define MC13783_REGCTRL_VCAM_STBY (1 << 7)
-#define MC13783_REGCTRL_VCAM_MODE (1 << 8)
-#define MC13783_REGCTRL_VRFBG_EN (1 << 9)
-#define MC13783_REGCTRL_VRFBG_STBY (1 << 10)
-#define MC13783_REGCTRL_VVIB_EN (1 << 11)
-#define MC13783_REGCTRL_VRF1_EN (1 << 12)
-#define MC13783_REGCTRL_VRF1_STBY (1 << 13)
-#define MC13783_REGCTRL_VRF1_MODE (1 << 14)
-#define MC13783_REGCTRL_VRF2_EN (1 << 15)
-#define MC13783_REGCTRL_VRF2_STBY (1 << 16)
-#define MC13783_REGCTRL_VRF2_MODE (1 << 17)
-#define MC13783_REGCTRL_VMMC1_EN (1 << 18)
-#define MC13783_REGCTRL_VMMC1_STBY (1 << 19)
-#define MC13783_REGCTRL_VMMC1_MODE (1 << 20)
-#define MC13783_REGCTRL_VMMC2_EN (1 << 21)
-#define MC13783_REGCTRL_VMMC2_STBY (1 << 22)
-#define MC13783_REGCTRL_VMMC2_MODE (1 << 23)
-
-/*
- * Reg Regulator Misc.
- */
-#define MC13783_REGCTRL_GPO1_EN (1 << 6)
-#define MC13783_REGCTRL_GPO2_EN (1 << 8)
-#define MC13783_REGCTRL_GPO3_EN (1 << 10)
-#define MC13783_REGCTRL_GPO4_EN (1 << 12)
-#define MC13783_REGCTRL_VIBPINCTRL (1 << 14)
-
-/*
- * Reg Switcher 4
- */
-#define MC13783_SWCTRL_SW1A_MODE (1 << 0)
-#define MC13783_SWCTRL_SW1A_STBY_MODE (1 << 2)
-#define MC13783_SWCTRL_SW1A_DVS_SPEED (1 << 6)
-#define MC13783_SWCTRL_SW1A_PANIC_MODE (1 << 8)
-#define MC13783_SWCTRL_SW1A_SOFTSTART (1 << 9)
-#define MC13783_SWCTRL_SW1B_MODE (1 << 10)
-#define MC13783_SWCTRL_SW1B_STBY_MODE (1 << 12)
-#define MC13783_SWCTRL_SW1B_DVS_SPEED (1 << 14)
-#define MC13783_SWCTRL_SW1B_PANIC_MODE (1 << 16)
-#define MC13783_SWCTRL_SW1B_SOFTSTART (1 << 17)
-#define MC13783_SWCTRL_PLL_EN (1 << 18)
-#define MC13783_SWCTRL_PLL_FACTOR (1 << 19)
-
-/*
- * Reg Switcher 5
- */
-#define MC13783_SWCTRL_SW2A_MODE (1 << 0)
-#define MC13783_SWCTRL_SW2A_STBY_MODE (1 << 2)
-#define MC13783_SWCTRL_SW2A_DVS_SPEED (1 << 6)
-#define MC13783_SWCTRL_SW2A_PANIC_MODE (1 << 8)
-#define MC13783_SWCTRL_SW2A_SOFTSTART (1 << 9)
-#define MC13783_SWCTRL_SW2B_MODE (1 << 10)
-#define MC13783_SWCTRL_SW2B_STBY_MODE (1 << 12)
-#define MC13783_SWCTRL_SW2B_DVS_SPEED (1 << 14)
-#define MC13783_SWCTRL_SW2B_PANIC_MODE (1 << 16)
-#define MC13783_SWCTRL_SW2B_SOFTSTART (1 << 17)
-#define MC13783_SWSET_SW3 (1 << 18)
-#define MC13783_SWCTRL_SW3_EN (1 << 20)
-#define MC13783_SWCTRL_SW3_STBY (1 << 21)
-#define MC13783_SWCTRL_SW3_MODE (1 << 22)
-
-static inline int mc13783_set_bits(struct mc13783 *mc13783, unsigned int offset,
- u32 mask, u32 val)
-{
- int ret;
- mc13783_lock(mc13783);
- ret = mc13783_reg_rmw(mc13783, offset, mask, val);
- mc13783_unlock(mc13783);
-
- return ret;
-}
-
-#endif /* __LINUX_MFD_MC13783_PRIV_H */
int mc13783_reg_rmw(struct mc13783 *mc13783, unsigned int offset,
u32 mask, u32 val);
+int mc13783_get_flags(struct mc13783 *mc13783);
+
int mc13783_irq_request(struct mc13783 *mc13783, int irq,
irq_handler_t handler, const char *name, void *dev);
int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq,
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#ifndef __LINUX_MFD_STMPE_H
+#define __LINUX_MFD_STMPE_H
+
+#include <linux/device.h>
+
+enum stmpe_block {
+ STMPE_BLOCK_GPIO = 1 << 0,
+ STMPE_BLOCK_KEYPAD = 1 << 1,
+ STMPE_BLOCK_TOUCHSCREEN = 1 << 2,
+ STMPE_BLOCK_ADC = 1 << 3,
+ STMPE_BLOCK_PWM = 1 << 4,
+ STMPE_BLOCK_ROTATOR = 1 << 5,
+};
+
+enum stmpe_partnum {
+ STMPE811,
+ STMPE1601,
+ STMPE2401,
+ STMPE2403,
+};
+
+/*
+ * For registers whose locations differ on variants, the correct address is
+ * obtained by indexing stmpe->regs with one of the following.
+ */
+enum {
+ STMPE_IDX_CHIP_ID,
+ STMPE_IDX_ICR_LSB,
+ STMPE_IDX_IER_LSB,
+ STMPE_IDX_ISR_MSB,
+ STMPE_IDX_GPMR_LSB,
+ STMPE_IDX_GPSR_LSB,
+ STMPE_IDX_GPCR_LSB,
+ STMPE_IDX_GPDR_LSB,
+ STMPE_IDX_GPEDR_MSB,
+ STMPE_IDX_GPRER_LSB,
+ STMPE_IDX_GPFER_LSB,
+ STMPE_IDX_GPAFR_U_MSB,
+ STMPE_IDX_IEGPIOR_LSB,
+ STMPE_IDX_ISGPIOR_MSB,
+ STMPE_IDX_MAX,
+};
+
+
+struct stmpe_variant_info;
+
+/**
+ * struct stmpe - STMPE MFD structure
+ * @lock: lock protecting I/O operations
+ * @irq_lock: IRQ bus lock
+ * @dev: device, mostly for dev_dbg()
+ * @i2c: i2c client
+ * @variant: the detected STMPE model number
+ * @regs: list of addresses of registers which are at different addresses on
+ * different variants. Indexed by one of STMPE_IDX_*.
+ * @irq_base: starting IRQ number for internal IRQs
+ * @num_gpios: number of gpios, differs for variants
+ * @ier: cache of IER registers for bus_lock
+ * @oldier: cache of IER registers for bus_lock
+ * @pdata: platform data
+ */
+struct stmpe {
+ struct mutex lock;
+ struct mutex irq_lock;
+ struct device *dev;
+ struct i2c_client *i2c;
+ enum stmpe_partnum partnum;
+ struct stmpe_variant_info *variant;
+ const u8 *regs;
+
+ int irq_base;
+ int num_gpios;
+ u8 ier[2];
+ u8 oldier[2];
+ struct stmpe_platform_data *pdata;
+};
+
+extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data);
+extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg);
+extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
+ u8 *values);
+extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
+ const u8 *values);
+extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val);
+extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
+ enum stmpe_block block);
+extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
+extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
+
+struct matrix_keymap_data;
+
+/**
+ * struct stmpe_keypad_platform_data - STMPE keypad platform data
+ * @keymap_data: key map table and size
+ * @debounce_ms: debounce interval, in ms. Maximum is
+ * %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ */
+struct stmpe_keypad_platform_data {
+ struct matrix_keymap_data *keymap_data;
+ unsigned int debounce_ms;
+ unsigned int scan_count;
+ bool no_autorepeat;
+};
+
+/**
+ * struct stmpe_gpio_platform_data - STMPE GPIO platform data
+ * @gpio_base: first gpio number assigned. A maximum of
+ * %STMPE_NR_GPIOS GPIOs will be allocated.
+ */
+struct stmpe_gpio_platform_data {
+ int gpio_base;
+ void (*setup)(struct stmpe *stmpe, unsigned gpio_base);
+ void (*remove)(struct stmpe *stmpe, unsigned gpio_base);
+};
+
+/**
+ * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
+ * data
+ * @sample_time: ADC converstion time in number of clock.
+ * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
+ * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
+ * recommended is 4.
+ * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
+ * @ref_sel: ADC reference source
+ * (0 -> internal reference, 1 -> external reference)
+ * @adc_freq: ADC Clock speed
+ * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
+ * @ave_ctrl: Sample average control
+ * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
+ * @touch_det_delay: Touch detect interrupt delay
+ * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
+ * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
+ * recommended is 3
+ * @settling: Panel driver settling time
+ * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
+ * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
+ * recommended is 2
+ * @fraction_z: Length of the fractional part in z
+ * (fraction_z ([0..7]) = Count of the fractional part)
+ * recommended is 7
+ * @i_drive: current limit value of the touchscreen drivers
+ * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
+ *
+ * */
+struct stmpe_ts_platform_data {
+ u8 sample_time;
+ u8 mod_12b;
+ u8 ref_sel;
+ u8 adc_freq;
+ u8 ave_ctrl;
+ u8 touch_det_delay;
+ u8 settling;
+ u8 fraction_z;
+ u8 i_drive;
+};
+
+/**
+ * struct stmpe_platform_data - STMPE platform data
+ * @id: device id to distinguish between multiple STMPEs on the same board
+ * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
+ * @irq_trigger: IRQ trigger to use for the interrupt to the host
+ * @irq_invert_polarity: IRQ line is connected with reversed polarity
+ * @autosleep: bool to enable/disable stmpe autosleep
+ * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
+ * @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or
+ * %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used.
+ * @gpio: GPIO-specific platform data
+ * @keypad: keypad-specific platform data
+ * @ts: touchscreen-specific platform data
+ */
+struct stmpe_platform_data {
+ int id;
+ unsigned int blocks;
+ int irq_base;
+ unsigned int irq_trigger;
+ bool irq_invert_polarity;
+ bool autosleep;
+ int autosleep_timeout;
+
+ struct stmpe_gpio_platform_data *gpio;
+ struct stmpe_keypad_platform_data *keypad;
+ struct stmpe_ts_platform_data *ts;
+};
+
+#define STMPE_NR_INTERNAL_IRQS 9
+#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x))
+
+#define STMPE_NR_GPIOS 24
+#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS)
+
+#endif
--- /dev/null
+#ifndef __LINUX_MFD_TPS6586X_H
+#define __LINUX_MFD_TPS6586X_H
+
+enum {
+ TPS6586X_ID_SM_0,
+ TPS6586X_ID_SM_1,
+ TPS6586X_ID_SM_2,
+ TPS6586X_ID_LDO_0,
+ TPS6586X_ID_LDO_1,
+ TPS6586X_ID_LDO_2,
+ TPS6586X_ID_LDO_3,
+ TPS6586X_ID_LDO_4,
+ TPS6586X_ID_LDO_5,
+ TPS6586X_ID_LDO_6,
+ TPS6586X_ID_LDO_7,
+ TPS6586X_ID_LDO_8,
+ TPS6586X_ID_LDO_9,
+ TPS6586X_ID_LDO_RTC,
+};
+
+struct tps6586x_subdev_info {
+ int id;
+ const char *name;
+ void *platform_data;
+};
+
+struct tps6586x_platform_data {
+ int num_subdevs;
+ struct tps6586x_subdev_info *subdevs;
+
+ int gpio_base;
+};
+
+/*
+ * NOTE: the functions below are not intended for use outside
+ * of the TPS6586X sub-device drivers
+ */
+extern int tps6586x_write(struct device *dev, int reg, uint8_t val);
+extern int tps6586x_writes(struct device *dev, int reg, int len, uint8_t *val);
+extern int tps6586x_read(struct device *dev, int reg, uint8_t *val);
+extern int tps6586x_reads(struct device *dev, int reg, int len, uint8_t *val);
+extern int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask);
+extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
+extern int tps6586x_update(struct device *dev, int reg, uint8_t val,
+ uint8_t mask);
+
+#endif /*__LINUX_MFD_TPS6586X_H */
#define WM8994_GP_FN_WSEQ_STATUS 16
#define WM8994_GP_FN_FIFO_ERROR 17
#define WM8994_GP_FN_OPCLK 18
+#define WM8994_GP_FN_THW 19
+#define WM8994_GP_FN_DCS_DONE 20
+#define WM8994_GP_FN_FLL1_OUT 21
+#define WM8994_GP_FN_FLL2_OUT 22
#define WM8994_GPN_DIR 0x8000 /* GPN_DIR */
#define WM8994_GPN_DIR_MASK 0x8000 /* GPN_DIR */
#define KVM_MINOR 232
#define BTRFS_MINOR 234
#define AUTOFS_MINOR 235
+#define MAPPER_CTRL_MINOR 236
#define MISC_DYNAMIC_MINOR 255
struct device;
}
extern void truncate_pagecache(struct inode *inode, loff_t old, loff_t new);
+extern void truncate_setsize(struct inode *inode, loff_t newsize);
extern int vmtruncate(struct inode *inode, loff_t offset);
extern int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end);
};
struct mmc_csd {
+ unsigned char structure;
unsigned char mmca_vsn;
unsigned short cmdclass;
unsigned short tacc_clks;
unsigned int tacc_ns;
unsigned int r2w_factor;
unsigned int max_dtr;
+ unsigned int erase_size; /* In sectors */
unsigned int read_blkbits;
unsigned int write_blkbits;
unsigned int capacity;
struct mmc_ext_csd {
u8 rev;
+ u8 erase_group_def;
+ u8 sec_feature_support;
unsigned int sa_timeout; /* Units: 100ns */
unsigned int hs_max_dtr;
unsigned int sectors;
+ unsigned int hc_erase_size; /* In sectors */
+ unsigned int hc_erase_timeout; /* In milliseconds */
+ unsigned int sec_trim_mult; /* Secure trim multiplier */
+ unsigned int sec_erase_mult; /* Secure erase multiplier */
+ unsigned int trim_timeout; /* In milliseconds */
};
struct sd_scr {
#define SD_SCR_BUS_WIDTH_4 (1<<2)
};
+struct sd_ssr {
+ unsigned int au; /* In sectors */
+ unsigned int erase_timeout; /* In milliseconds */
+ unsigned int erase_offset; /* In milliseconds */
+};
+
struct sd_switch_caps {
unsigned int hs_max_dtr;
};
#define MMC_TYPE_MMC 0 /* MMC card */
#define MMC_TYPE_SD 1 /* SD card */
#define MMC_TYPE_SDIO 2 /* SDIO card */
+#define MMC_TYPE_SD_COMBO 3 /* SD combo (IO+mem) card */
unsigned int state; /* (our) card state */
#define MMC_STATE_PRESENT (1<<0) /* present in sysfs */
#define MMC_STATE_READONLY (1<<1) /* card is read-only */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
/* for byte mode */
+#define MMC_QUIRK_NONSTD_SDIO (1<<2) /* non-standard SDIO card attached */
+ /* (missing CIA registers) */
+
+ unsigned int erase_size; /* erase size in sectors */
+ unsigned int erase_shift; /* if erase unit is power 2 */
+ unsigned int pref_erase; /* in sectors */
+ u8 erased_byte; /* value of erased bytes */
u32 raw_cid[4]; /* raw card CID */
u32 raw_csd[4]; /* raw card CSD */
struct mmc_csd csd; /* card specific */
struct mmc_ext_csd ext_csd; /* mmc v4 extended card specific */
struct sd_scr scr; /* extra SD information */
+ struct sd_ssr ssr; /* yet more SD information */
struct sd_switch_caps sw_caps; /* switch (CMD6) caps */
unsigned int sdio_funcs; /* number of SDIO functions */
* actively failing requests
*/
+ unsigned int erase_timeout; /* in milliseconds */
+
struct mmc_data *data; /* data segment associated with cmd */
struct mmc_request *mrq; /* associated request */
};
extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
struct mmc_command *, int);
+#define MMC_ERASE_ARG 0x00000000
+#define MMC_SECURE_ERASE_ARG 0x80000000
+#define MMC_TRIM_ARG 0x00000001
+#define MMC_SECURE_TRIM1_ARG 0x80000001
+#define MMC_SECURE_TRIM2_ARG 0x80008000
+
+#define MMC_SECURE_ARGS 0x80000000
+#define MMC_TRIM_ARGS 0x00008001
+
+extern int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
+ unsigned int arg);
+extern int mmc_can_erase(struct mmc_card *card);
+extern int mmc_can_trim(struct mmc_card *card);
+extern int mmc_can_secure_erase_trim(struct mmc_card *card);
+extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
+ unsigned int nr);
+
extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
unsigned int f_min;
unsigned int f_max;
u32 ocr_avail;
+ struct notifier_block pm_notify;
#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */
#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */
#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */
+#define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */
mmc_pm_flag_t pm_caps; /* supported pm features */
/* Only used with MMC_CAP_DISABLE */
int enabled; /* host is enabled */
+ int rescan_disable; /* disable card detection */
int nesting_cnt; /* "enable" nesting count */
int en_dis_recurs; /* detect recursion */
unsigned int disable_delay; /* disable delay in msecs */
int mmc_host_enable(struct mmc_host *host);
int mmc_host_disable(struct mmc_host *host);
int mmc_host_lazy_disable(struct mmc_host *host);
+int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
static inline void mmc_set_disable_delay(struct mmc_host *host,
unsigned int disable_delay)
* EXT_CSD fields
*/
-#define EXT_CSD_BUS_WIDTH 183 /* R/W */
-#define EXT_CSD_HS_TIMING 185 /* R/W */
-#define EXT_CSD_CARD_TYPE 196 /* RO */
-#define EXT_CSD_REV 192 /* RO */
-#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
-#define EXT_CSD_S_A_TIMEOUT 217
+#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
+#define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
+#define EXT_CSD_BUS_WIDTH 183 /* R/W */
+#define EXT_CSD_HS_TIMING 185 /* R/W */
+#define EXT_CSD_REV 192 /* RO */
+#define EXT_CSD_STRUCTURE 194 /* RO */
+#define EXT_CSD_CARD_TYPE 196 /* RO */
+#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
+#define EXT_CSD_S_A_TIMEOUT 217 /* RO */
+#define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */
+#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
+#define EXT_CSD_SEC_TRIM_MULT 229 /* RO */
+#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
+#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
+#define EXT_CSD_TRIM_MULT 232 /* RO */
/*
* EXT_CSD field definitions
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
+#define EXT_CSD_SEC_ER_EN BIT(0)
+#define EXT_CSD_SEC_BD_BLK_EN BIT(2)
+#define EXT_CSD_SEC_GB_CL_EN BIT(4)
+
/*
* MMC_SWITCH access modes
*/
/* class 10 */
#define SD_SWITCH 6 /* adtc [31:0] See below R1 */
+ /* class 5 */
+#define SD_ERASE_WR_BLK_START 32 /* ac [31:0] data addr R1 */
+#define SD_ERASE_WR_BLK_END 33 /* ac [31:0] data addr R1 */
+
/* Application commands */
#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
+#define SD_APP_SD_STATUS 13 /* adtc R1 */
#define SD_APP_SEND_NUM_WR_BLKS 22 /* adtc R1 */
#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */
#define SD_APP_SEND_SCR 51 /* adtc R1 */
struct kernel_param;
-/* Returns 0, or -errno. arg is in kp->arg. */
-typedef int (*param_set_fn)(const char *val, struct kernel_param *kp);
-/* Returns length written or -errno. Buffer is 4k (ie. be short!) */
-typedef int (*param_get_fn)(char *buffer, struct kernel_param *kp);
+struct kernel_param_ops {
+ /* Returns 0, or -errno. arg is in kp->arg. */
+ int (*set)(const char *val, const struct kernel_param *kp);
+ /* Returns length written or -errno. Buffer is 4k (ie. be short!) */
+ int (*get)(char *buffer, const struct kernel_param *kp);
+ /* Optional function to free kp->arg when module unloaded. */
+ void (*free)(void *arg);
+};
/* Flag bits for kernel_param.flags */
#define KPARAM_ISBOOL 2
struct kernel_param {
const char *name;
+ const struct kernel_param_ops *ops;
u16 perm;
u16 flags;
- param_set_fn set;
- param_get_fn get;
union {
void *arg;
const struct kparam_string *str;
{
unsigned int max;
unsigned int *num;
- param_set_fn set;
- param_get_fn get;
+ const struct kernel_param_ops *ops;
unsigned int elemsize;
void *elem;
};
+/**
+ * module_param - typesafe helper for a module/cmdline parameter
+ * @value: the variable to alter, and exposed parameter name.
+ * @type: the type of the parameter
+ * @perm: visibility in sysfs.
+ *
+ * @value becomes the module parameter, or (prefixed by KBUILD_MODNAME and a
+ * ".") the kernel commandline parameter. Note that - is changed to _, so
+ * the user can use "foo-bar=1" even for variable "foo_bar".
+ *
+ * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * for world-readable, 0644 for root-writable, etc. Note that if it
+ * is writable, you may need to use kparam_block_sysfs_write() around
+ * accesses (esp. charp, which can be kfreed when it changes).
+ *
+ * The @type is simply pasted to refer to a param_ops_##type and a
+ * param_check_##type: for convenience many standard types are provided but
+ * you can create your own by defining those variables.
+ *
+ * Standard types are:
+ * byte, short, ushort, int, uint, long, ulong
+ * charp: a character pointer
+ * bool: a bool, values 0/1, y/n, Y/N.
+ * invbool: the above, only sense-reversed (N = true).
+ */
+#define module_param(name, type, perm) \
+ module_param_named(name, name, type, perm)
+
+/**
+ * module_param_named - typesafe helper for a renamed module/cmdline parameter
+ * @name: a valid C identifier which is the parameter name.
+ * @value: the actual lvalue to alter.
+ * @type: the type of the parameter
+ * @perm: visibility in sysfs.
+ *
+ * Usually it's a good idea to have variable names and user-exposed names the
+ * same, but that's harder if the variable must be non-static or is inside a
+ * structure. This allows exposure under a different name.
+ */
+#define module_param_named(name, value, type, perm) \
+ param_check_##type(name, &(value)); \
+ module_param_cb(name, ¶m_ops_##type, &value, perm); \
+ __MODULE_PARM_TYPE(name, #type)
+
+/**
+ * module_param_cb - general callback for a module/cmdline parameter
+ * @name: a valid C identifier which is the parameter name.
+ * @ops: the set & get operations for this parameter.
+ * @perm: visibility in sysfs.
+ *
+ * The ops can have NULL set or get functions.
+ */
+#define module_param_cb(name, ops, arg, perm) \
+ __module_param_call(MODULE_PARAM_PREFIX, \
+ name, ops, arg, __same_type((arg), bool *), perm)
+
/* On alpha, ia64 and ppc64 relocations to global data cannot go into
read-only sections (which is part of respective UNIX ABI on these
platforms). So 'const' makes no sense and even causes compile failures
#endif
/* This is the fundamental function for registering boot/module
- parameters. perm sets the visibility in sysfs: 000 means it's
- not there, read bits mean it's readable, write bits mean it's
- writable. */
-#define __module_param_call(prefix, name, set, get, arg, isbool, perm) \
+ parameters. */
+#define __module_param_call(prefix, name, ops, arg, isbool, perm) \
/* Default value instead of permissions? */ \
static int __param_perm_check_##name __attribute__((unused)) = \
BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2)) \
static struct kernel_param __moduleparam_const __param_##name \
__used \
__attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \
- = { __param_str_##name, perm, isbool ? KPARAM_ISBOOL : 0, \
- set, get, { arg } }
+ = { __param_str_##name, ops, perm, isbool ? KPARAM_ISBOOL : 0, \
+ { arg } }
+
+/* Obsolete - use module_param_cb() */
+#define module_param_call(name, set, get, arg, perm) \
+ static struct kernel_param_ops __param_ops_##name = \
+ { (void *)set, (void *)get }; \
+ __module_param_call(MODULE_PARAM_PREFIX, \
+ name, &__param_ops_##name, arg, \
+ __same_type(arg, bool *), \
+ (perm) + sizeof(__check_old_set_param(set))*0)
+
+/* We don't get oldget: it's often a new-style param_get_uint, etc. */
+static inline int
+__check_old_set_param(int (*oldset)(const char *, struct kernel_param *))
+{
+ return 0;
+}
-#define module_param_call(name, set, get, arg, perm) \
- __module_param_call(MODULE_PARAM_PREFIX, \
- name, set, get, arg, \
- __same_type(*(arg), bool), perm)
+/**
+ * kparam_block_sysfs_write - make sure a parameter isn't written via sysfs.
+ * @name: the name of the parameter
+ *
+ * There's no point blocking write on a paramter that isn't writable via sysfs!
+ */
+#define kparam_block_sysfs_write(name) \
+ do { \
+ BUG_ON(!(__param_##name.perm & 0222)); \
+ __kernel_param_lock(); \
+ } while (0)
-/* Helper functions: type is byte, short, ushort, int, uint, long,
- ulong, charp, bool or invbool, or XXX if you define param_get_XXX,
- param_set_XXX and param_check_XXX. */
-#define module_param_named(name, value, type, perm) \
- param_check_##type(name, &(value)); \
- module_param_call(name, param_set_##type, param_get_##type, &value, perm); \
- __MODULE_PARM_TYPE(name, #type)
+/**
+ * kparam_unblock_sysfs_write - allows sysfs to write to a parameter again.
+ * @name: the name of the parameter
+ */
+#define kparam_unblock_sysfs_write(name) \
+ do { \
+ BUG_ON(!(__param_##name.perm & 0222)); \
+ __kernel_param_unlock(); \
+ } while (0)
-#define module_param(name, type, perm) \
- module_param_named(name, name, type, perm)
+/**
+ * kparam_block_sysfs_read - make sure a parameter isn't read via sysfs.
+ * @name: the name of the parameter
+ *
+ * This also blocks sysfs writes.
+ */
+#define kparam_block_sysfs_read(name) \
+ do { \
+ BUG_ON(!(__param_##name.perm & 0444)); \
+ __kernel_param_lock(); \
+ } while (0)
+
+/**
+ * kparam_unblock_sysfs_read - allows sysfs to read a parameter again.
+ * @name: the name of the parameter
+ */
+#define kparam_unblock_sysfs_read(name) \
+ do { \
+ BUG_ON(!(__param_##name.perm & 0444)); \
+ __kernel_param_unlock(); \
+ } while (0)
+
+#ifdef CONFIG_SYSFS
+extern void __kernel_param_lock(void);
+extern void __kernel_param_unlock(void);
+#else
+static inline void __kernel_param_lock(void)
+{
+}
+static inline void __kernel_param_unlock(void)
+{
+}
+#endif
#ifndef MODULE
/**
* core_param - define a historical core kernel parameter.
* @name: the name of the cmdline and sysfs parameter (often the same as var)
* @var: the variable
- * @type: the type (for param_set_##type and param_get_##type)
+ * @type: the type of the parameter
* @perm: visibility in sysfs
*
* core_param is just like module_param(), but cannot be modular and
*/
#define core_param(name, var, type, perm) \
param_check_##type(name, &(var)); \
- __module_param_call("", name, param_set_##type, param_get_##type, \
+ __module_param_call("", name, ¶m_ops_##type, \
&var, __same_type(var, bool), perm)
#endif /* !MODULE */
-/* Actually copy string: maxlen param is usually sizeof(string). */
+/**
+ * module_param_string - a char array parameter
+ * @name: the name of the parameter
+ * @string: the string variable
+ * @len: the maximum length of the string, incl. terminator
+ * @perm: visibility in sysfs.
+ *
+ * This actually copies the string when it's set (unlike type charp).
+ * @len is usually just sizeof(string).
+ */
#define module_param_string(name, string, len, perm) \
static const struct kparam_string __param_string_##name \
= { len, string }; \
__module_param_call(MODULE_PARAM_PREFIX, name, \
- param_set_copystring, param_get_string, \
+ ¶m_ops_string, \
.str = &__param_string_##name, 0, perm); \
__MODULE_PARM_TYPE(name, "string")
/* Called on module insert or kernel boot */
extern int parse_args(const char *name,
char *args,
- struct kernel_param *params,
+ const struct kernel_param *params,
unsigned num,
int (*unknown)(char *param, char *val));
#define __param_check(name, p, type) \
static inline type *__check_##name(void) { return(p); }
-extern int param_set_byte(const char *val, struct kernel_param *kp);
-extern int param_get_byte(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_ops_byte;
+extern int param_set_byte(const char *val, const struct kernel_param *kp);
+extern int param_get_byte(char *buffer, const struct kernel_param *kp);
#define param_check_byte(name, p) __param_check(name, p, unsigned char)
-extern int param_set_short(const char *val, struct kernel_param *kp);
-extern int param_get_short(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_ops_short;
+extern int param_set_short(const char *val, const struct kernel_param *kp);
+extern int param_get_short(char *buffer, const struct kernel_param *kp);
#define param_check_short(name, p) __param_check(name, p, short)
-extern int param_set_ushort(const char *val, struct kernel_param *kp);
-extern int param_get_ushort(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_ops_ushort;
+extern int param_set_ushort(const char *val, const struct kernel_param *kp);
+extern int param_get_ushort(char *buffer, const struct kernel_param *kp);
#define param_check_ushort(name, p) __param_check(name, p, unsigned short)
-extern int param_set_int(const char *val, struct kernel_param *kp);
-extern int param_get_int(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_ops_int;
+extern int param_set_int(const char *val, const struct kernel_param *kp);
+extern int param_get_int(char *buffer, const struct kernel_param *kp);
#define param_check_int(name, p) __param_check(name, p, int)
-extern int param_set_uint(const char *val, struct kernel_param *kp);
-extern int param_get_uint(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_ops_uint;
+extern int param_set_uint(const char *val, const struct kernel_param *kp);
+extern int param_get_uint(char *buffer, const struct kernel_param *kp);
#define param_check_uint(name, p) __param_check(name, p, unsigned int)
-extern int param_set_long(const char *val, struct kernel_param *kp);
-extern int param_get_long(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_ops_long;
+extern int param_set_long(const char *val, const struct kernel_param *kp);
+extern int param_get_long(char *buffer, const struct kernel_param *kp);
#define param_check_long(name, p) __param_check(name, p, long)
-extern int param_set_ulong(const char *val, struct kernel_param *kp);
-extern int param_get_ulong(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_ops_ulong;
+extern int param_set_ulong(const char *val, const struct kernel_param *kp);
+extern int param_get_ulong(char *buffer, const struct kernel_param *kp);
#define param_check_ulong(name, p) __param_check(name, p, unsigned long)
-extern int param_set_charp(const char *val, struct kernel_param *kp);
-extern int param_get_charp(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_ops_charp;
+extern int param_set_charp(const char *val, const struct kernel_param *kp);
+extern int param_get_charp(char *buffer, const struct kernel_param *kp);
#define param_check_charp(name, p) __param_check(name, p, char *)
/* For historical reasons "bool" parameters can be (unsigned) "int". */
-extern int param_set_bool(const char *val, struct kernel_param *kp);
-extern int param_get_bool(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_ops_bool;
+extern int param_set_bool(const char *val, const struct kernel_param *kp);
+extern int param_get_bool(char *buffer, const struct kernel_param *kp);
#define param_check_bool(name, p) \
static inline void __check_##name(void) \
{ \
- BUILD_BUG_ON(!__same_type(*(p), bool) && \
- !__same_type(*(p), unsigned int) && \
- !__same_type(*(p), int)); \
+ BUILD_BUG_ON(!__same_type((p), bool *) && \
+ !__same_type((p), unsigned int *) && \
+ !__same_type((p), int *)); \
}
-extern int param_set_invbool(const char *val, struct kernel_param *kp);
-extern int param_get_invbool(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_ops_invbool;
+extern int param_set_invbool(const char *val, const struct kernel_param *kp);
+extern int param_get_invbool(char *buffer, const struct kernel_param *kp);
#define param_check_invbool(name, p) __param_check(name, p, bool)
-/* Comma-separated array: *nump is set to number they actually specified. */
+/**
+ * module_param_array - a parameter which is an array of some type
+ * @name: the name of the array variable
+ * @type: the type, as per module_param()
+ * @nump: optional pointer filled in with the number written
+ * @perm: visibility in sysfs
+ *
+ * Input and output are as comma-separated values. Commas inside values
+ * don't work properly (eg. an array of charp).
+ *
+ * ARRAY_SIZE(@name) is used to determine the number of elements in the
+ * array, so the definition must be visible.
+ */
+#define module_param_array(name, type, nump, perm) \
+ module_param_array_named(name, name, type, nump, perm)
+
+/**
+ * module_param_array_named - renamed parameter which is an array of some type
+ * @name: a valid C identifier which is the parameter name
+ * @array: the name of the array variable
+ * @type: the type, as per module_param()
+ * @nump: optional pointer filled in with the number written
+ * @perm: visibility in sysfs
+ *
+ * This exposes a different name than the actual variable name. See
+ * module_param_named() for why this might be necessary.
+ */
#define module_param_array_named(name, array, type, nump, perm) \
static const struct kparam_array __param_arr_##name \
- = { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type,\
+ = { ARRAY_SIZE(array), nump, ¶m_ops_##type, \
sizeof(array[0]), array }; \
__module_param_call(MODULE_PARAM_PREFIX, name, \
- param_array_set, param_array_get, \
+ ¶m_array_ops, \
.arr = &__param_arr_##name, \
__same_type(array[0], bool), perm); \
__MODULE_PARM_TYPE(name, "array of " #type)
-#define module_param_array(name, type, nump, perm) \
- module_param_array_named(name, name, type, nump, perm)
-
-extern int param_array_set(const char *val, struct kernel_param *kp);
-extern int param_array_get(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_array_ops;
-extern int param_set_copystring(const char *val, struct kernel_param *kp);
-extern int param_get_string(char *buffer, struct kernel_param *kp);
+extern struct kernel_param_ops param_ops_string;
+extern int param_set_copystring(const char *val, const struct kernel_param *);
+extern int param_get_string(char *buffer, const struct kernel_param *kp);
/* for exporting parameters in /sys/parameters */
#if defined(CONFIG_SYSFS) && defined(CONFIG_MODULES)
extern int module_param_sysfs_setup(struct module *mod,
- struct kernel_param *kparam,
+ const struct kernel_param *kparam,
unsigned int num_params);
extern void module_param_sysfs_remove(struct module *mod);
#else
static inline int module_param_sysfs_setup(struct module *mod,
- struct kernel_param *kparam,
+ const struct kernel_param *kparam,
unsigned int num_params)
{
return 0;
#define MNT_NODIRATIME 0x10
#define MNT_RELATIME 0x20
#define MNT_READONLY 0x40 /* does the user want this to be r/o? */
-#define MNT_STRICTATIME 0x80
#define MNT_SHRINKABLE 0x100
#define MNT_WRITE_HOLD 0x200
struct list_head mnt_mounts; /* list of children, anchored here */
struct list_head mnt_child; /* and going through their mnt_child */
int mnt_flags;
- /* 4 bytes hole on 64bits arches */
+ /* 4 bytes hole on 64bits arches without fsnotify */
+#ifdef CONFIG_FSNOTIFY
+ __u32 mnt_fsnotify_mask;
+ struct hlist_head mnt_fsnotify_marks;
+#endif
const char *mnt_devname; /* Name of device e.g. /dev/dsk/hda1 */
struct list_head mnt_list;
struct list_head mnt_expire; /* link in fs-specific expiry list */
* NAND family Bad Block Management (BBM) header file
* - Bad Block Table (BBT) implementation
*
- * Copyright (c) 2005 Samsung Electronics
+ * Copyright © 2005 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
- * Copyright (c) 2000-2005
+ * Copyright © 2000-2005
* Thomas Gleixner <tglx@linuxtronix.de>
*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __LINUX_MTD_BBM_H
#define __LINUX_MTD_BBM_H
#define NAND_BBT_SAVECONTENT 0x00002000
/* Search good / bad pattern on the first and the second page */
#define NAND_BBT_SCAN2NDPAGE 0x00004000
+/* Search good / bad pattern on the last page of the eraseblock */
+#define NAND_BBT_SCANLASTPAGE 0x00008000
+/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */
+#define NAND_BBT_SCANBYTE1AND6 0x00100000
+/* The nand_bbt_descr was created dynamicaly and must be freed */
+#define NAND_BBT_DYNAMICSTRUCT 0x00200000
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
/*
- * (C) 2003 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2003-2010 David Woodhouse <dwmw2@infradead.org>
*
- * Interface to Linux block layer for MTD 'translation layers'.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
-
-/* Common Flash Interface structures
- * See http://support.intel.com/design/flash/technote/index.htm
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __MTD_CFI_H__
+/*
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
#include <asm/byteorder.h>
#ifndef CONFIG_MTD_CFI_ADV_OPTIONS
+++ /dev/null
-
-#ifndef __LINUX_MTD_COMPATMAC_H__
-#define __LINUX_MTD_COMPATMAC_H__
-
-/* Nothing to see here. We write 2.5-compatible code and this
- file makes it all OK in older kernels, but it's empty in _current_
- kernels. Include guard just to make GCC ignore it in future inclusions
- anyway... */
-
-#endif /* __LINUX_MTD_COMPATMAC_H__ */
/*
* MTD device concatenation layer definitions
*
- * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
+ * Copyright © 2002 Robert Kaiser <rkaiser@sysgo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
- * This code is GPL
*/
#ifndef MTD_CONCAT_H
/*
* Linux driver for Disk-On-Chip devices
*
- * Copyright (C) 1999 Machine Vision Holdings, Inc.
- * Copyright (C) 2001-2003 David Woodhouse <dwmw2@infradead.org>
- * Copyright (C) 2002-2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright (C) 2002-2003 SnapGear Inc
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2002-2003 Greg Ungerer <gerg@snapgear.com>
+ * Copyright © 2002-2003 SnapGear Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
- * Released under GPL
*/
#ifndef __MTD_DOC2000_H__
-
/*
- * struct flchip definition
+ * Copyright © 2000 Red Hat UK Limited
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*
- * Contains information about the location and state of a given flash device
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
- * (C) 2000 Red Hat. GPLd.
*/
#ifndef __MTD_FLASHCHIP_H__
/* This is used to handle contention on write/erase operations
between partitions of the same physical chip. */
struct flchip_shared {
- spinlock_t lock;
+ struct mutex lock;
struct flchip *writing;
struct flchip *erasing;
};
/*
- * (C) 2001, 2001 Red Hat, Inc.
- * GPL'd
+ * Copyright © 2001 Red Hat UK Limited
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __LINUX_MTD_GEN_PROBE_H__
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
/* Overhauled routines for dealing with different mmap regions of flash */
#include <linux/string.h>
#include <linux/bug.h>
-#include <linux/mtd/compatmac.h>
#include <asm/unaligned.h>
#include <asm/system.h>
/*
- * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
- * Released under GPL
*/
#ifndef __MTD_MTD_H__
#include <linux/notifier.h>
#include <linux/device.h>
-#include <linux/mtd/compatmac.h>
#include <mtd/mtd-abi.h>
#include <asm/div64.h>
/* Chip-supported device locking */
int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+ int (*is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
/* Power Management functions */
int (*suspend) (struct mtd_info *mtd);
/*
* linux/include/linux/mtd/nand.h
*
- * Copyright (c) 2000 David Woodhouse <dwmw2@infradead.org>
- * Steven J. Hill <sjhill@realitydiluted.com>
- * Thomas Gleixner <tglx@linutronix.de>
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ * Steven J. Hill <sjhill@realitydiluted.com>
+ * Thomas Gleixner <tglx@linutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#define NAND_NO_READRDY 0x00000100
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
-/* Chip stores bad block marker on the last page of the eraseblock */
-#define NAND_BB_LAST_PAGE 0x00000400
/* Device is one of 'new' xD cards that expose fake nand command set */
#define NAND_BROKEN_XD 0x00000400
/*
* drivers/mtd/nand_ecc.h
*
- * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ * Copyright (C) 2000-2010 Steven J. Hill <sjhill@realitydiluted.com>
+ * David Woodhouse <dwmw2@infradead.org>
+ * Thomas Gleixner <tglx@linutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
/*
- * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __MTD_NFTL_H__
* @write_word: [REPLACEABLE] hardware specific function for write
* register of OneNAND
* @mmcontrol: sync burst read function
+ * @chip_probe: [REPLACEABLE] hardware specific function for chip probe
* @block_markbad: function to mark a block as bad
* @scan_bbt: [REPLACEALBE] hardware specific function for scanning
* Bad block Table
unsigned short (*read_word)(void __iomem *addr);
void (*write_word)(unsigned short value, void __iomem *addr);
void (*mmcontrol)(struct mtd_info *mtd, int sync_read);
+ int (*chip_probe)(struct mtd_info *mtd);
int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
int (*scan_bbt)(struct mtd_info *mtd);
void (*set_vpp)(struct map_info *, int);
unsigned int nr_parts;
unsigned int pfow_base;
+ char *probe_type;
struct mtd_partition *parts;
};
+header-y += nf_conntrack_common.h
+header-y += nf_conntrack_ftp.h
header-y += nf_conntrack_sctp.h
+header-y += nf_conntrack_tcp.h
header-y += nf_conntrack_tuple_common.h
+header-y += nfnetlink.h
+header-y += nfnetlink_compat.h
header-y += nfnetlink_conntrack.h
header-y += nfnetlink_log.h
header-y += nfnetlink_queue.h
+header-y += x_tables.h
header-y += xt_CHECKSUM.h
header-y += xt_CLASSIFY.h
header-y += xt_CONNMARK.h
header-y += xt_dscp.h
header-y += xt_esp.h
header-y += xt_hashlimit.h
+header-y += xt_helper.h
header-y += xt_iprange.h
header-y += xt_ipvs.h
-header-y += xt_helper.h
header-y += xt_length.h
header-y += xt_limit.h
header-y += xt_mac.h
header-y += xt_multiport.h
header-y += xt_osf.h
header-y += xt_owner.h
+header-y += xt_physdev.h
header-y += xt_pkttype.h
+header-y += xt_policy.h
header-y += xt_quota.h
header-y += xt_rateest.h
header-y += xt_realm.h
header-y += xt_tcpudp.h
header-y += xt_time.h
header-y += xt_u32.h
-
-unifdef-y += nf_conntrack_common.h
-unifdef-y += nf_conntrack_ftp.h
-unifdef-y += nf_conntrack_tcp.h
-unifdef-y += nfnetlink.h
-unifdef-y += nfnetlink_compat.h
-unifdef-y += x_tables.h
-unifdef-y += xt_physdev.h
-unifdef-y += xt_policy.h
+header-y += arp_tables.h
header-y += arpt_mangle.h
-
-unifdef-y += arp_tables.h
+header-y += ebt_802_3.h
header-y += ebt_among.h
header-y += ebt_arp.h
header-y += ebt_arpreply.h
header-y += ebt_stp.h
header-y += ebt_ulog.h
header-y += ebt_vlan.h
-
-unifdef-y += ebtables.h
-unifdef-y += ebt_802_3.h
+header-y += ebtables.h
+header-y += ip_queue.h
+header-y += ip_tables.h
header-y += ipt_CLUSTERIP.h
header-y += ipt_ECN.h
header-y += ipt_LOG.h
header-y += ipt_ecn.h
header-y += ipt_realm.h
header-y += ipt_ttl.h
-
-unifdef-y += ip_queue.h
-unifdef-y += ip_tables.h
+header-y += ip6_tables.h
header-y += ip6t_HL.h
header-y += ip6t_LOG.h
header-y += ip6t_REJECT.h
header-y += ip6t_ah.h
header-y += ip6t_frag.h
-header-y += ip6t_ipv6header.h
header-y += ip6t_hl.h
+header-y += ip6t_ipv6header.h
header-y += ip6t_mh.h
header-y += ip6t_opts.h
header-y += ip6t_rt.h
-
-unifdef-y += ip6_tables.h
}
#else
-static inline int netpoll_rx(struct sk_buff *skb)
+static inline bool netpoll_rx(struct sk_buff *skb)
{
return 0;
}
-unifdef-y += const.h
-unifdef-y += debug.h
-unifdef-y += export.h
-unifdef-y += nfsfh.h
-unifdef-y += stats.h
-unifdef-y += syscall.h
+header-y += const.h
+header-y += debug.h
+header-y += export.h
+header-y += nfsfh.h
+header-y += stats.h
+header-y += syscall.h
#ifndef _LINUX_OF_DEVICE_H
#define _LINUX_OF_DEVICE_H
-/*
- * The of_device *was* a kind of "base class" that was a superset of
- * struct device for use by devices attached to an OF node and probed
- * using OF properties. However, the important bit of OF-style
- * probing, namely the device node pointer, has been moved into the
- * common struct device when CONFIG_OF is set to make OF-style probing
- * available to all bus types. So now, just make of_device and
- * platform_device equivalent so that current of_platform bus users
- * can be transparently migrated over to using the platform bus.
- *
- * This line will go away once all references to of_device are removed
- * from the kernel.
- */
-#define of_device platform_device
#include <linux/platform_device.h>
#include <linux/of_platform.h> /* temporary until merge */
#include <linux/of.h>
#include <linux/mod_devicetable.h>
-#define to_of_device(d) container_of(d, struct of_device, dev)
-
extern const struct of_device_id *of_match_device(
const struct of_device_id *matches, const struct device *dev);
extern void of_device_make_bus_id(struct device *dev);
#include <linux/of_device.h>
#include <linux/platform_device.h>
-/*
- * An of_platform_driver driver is attached to a basic of_device on
- * the "platform bus" (platform_bus_type).
+/**
+ * of_platform_driver - Legacy of-aware driver for platform devices.
+ *
+ * An of_platform_driver driver is attached to a basic platform_device on
+ * ether the "platform bus" (platform_bus_type), or the ibm ebus
+ * (ibmebus_bus_type).
+ *
+ * of_platform_driver is being phased out when used with the platform_bus_type,
+ * and regular platform_drivers should be used instead. When the transition
+ * is complete, only ibmebus will be using this structure, and the
+ * platform_driver member of this structure will be removed.
*/
struct of_platform_driver
{
extern unsigned long badness(struct task_struct *p, struct mem_cgroup *mem,
const nodemask_t *nodemask, unsigned long uptime);
+extern struct task_struct *find_lock_task_mm(struct task_struct *p);
+
/* sysctls */
extern int sysctl_oom_dump_tasks;
extern int sysctl_oom_kill_allocating_task;
#include <linux/gfp.h>
#include <linux/bitops.h>
#include <linux/hardirq.h> /* for in_interrupt() */
+#include <linux/hugetlb_inline.h>
/*
* Bits in mapping->flags. The lower __GFP_BITS_SHIFT bits are the page
return ((loff_t)page->index) << PAGE_CACHE_SHIFT;
}
+extern pgoff_t linear_hugepage_index(struct vm_area_struct *vma,
+ unsigned long address);
+
static inline pgoff_t linear_page_index(struct vm_area_struct *vma,
unsigned long address)
{
- pgoff_t pgoff = (address - vma->vm_start) >> PAGE_SHIFT;
+ pgoff_t pgoff;
+ if (unlikely(is_vm_hugetlb_page(vma)))
+ return linear_hugepage_index(vma, address);
+ pgoff = (address - vma->vm_start) >> PAGE_SHIFT;
pgoff += vma->vm_pgoff;
return pgoff >> (PAGE_CACHE_SHIFT - PAGE_SHIFT);
}
extern void path_get(struct path *);
extern void path_put(struct path *);
+static inline int path_equal(const struct path *path1, const struct path *path2)
+{
+ return path1->mnt == path2->mnt && path1->dentry == path2->dentry;
+}
+
#endif /* _LINUX_PATH_H */
#define PCI_VENDOR_ID_AKS 0x416c
#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100
+#define PCI_VENDOR_ID_ACCESSIO 0x494f
+#define PCI_DEVICE_ID_ACCESSIO_WDG_CSM 0x22c0
+
#define PCI_VENDOR_ID_S3 0x5333
#define PCI_DEVICE_ID_S3_TRIO 0x8811
#define PCI_DEVICE_ID_S3_868 0x8880
#define POISON_FREE 0x6b /* for use-after-free poisoning */
#define POISON_END 0xa5 /* end-byte of poisoning */
-/********** mm/hugetlb.c **********/
-/*
- * Private mappings of hugetlb pages use this poisoned value for
- * page->mapping. The core VM should not be doing anything with this mapping
- * but futex requires the existence of some page->mapping value even though it
- * is unused if PAGE_MAPPING_ANON is set.
- */
-#define HUGETLB_POISON ((void *)(0x00300300 + POISON_POINTER_DELTA + PAGE_MAPPING_ANON))
-
/********** arch/$ARCH/mm/init.c **********/
#define POISON_FREE_INITMEM 0xcc
long clock_nanosleep_restart(struct restart_block *restart_block);
-void update_rlimit_cpu(unsigned long rlim_new);
+void update_rlimit_cpu(struct task_struct *task, unsigned long rlim_new);
#endif
#define disable_kernel_altivec()
#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
#define MODULE_LICENSE(licence)
+#define MODULE_DESCRIPTION(desc)
#define subsys_initcall(x)
#define module_exit(x)
#endif /* __KERNEL__ */
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *
+ */
+
+#ifndef __LINUX_MFD_AB8500_REGULATOR_H
+#define __LINUX_MFD_AB8500_REGULATOR_H
+
+/* AB8500 regulators */
+#define AB8500_LDO_AUX1 0
+#define AB8500_LDO_AUX2 1
+#define AB8500_LDO_AUX3 2
+#define AB8500_LDO_INTCORE 3
+#define AB8500_LDO_TVOUT 4
+#define AB8500_LDO_AUDIO 5
+#define AB8500_LDO_ANAMIC1 6
+#define AB8500_LDO_ANAMIC2 7
+#define AB8500_LDO_DMIC 8
+#define AB8500_LDO_ANA 9
+
+#endif
struct reiserfs_iget_args *args);
int reiserfs_find_actor(struct inode *inode, void *p);
int reiserfs_init_locked_inode(struct inode *inode, void *p);
-void reiserfs_delete_inode(struct inode *inode);
+void reiserfs_evict_inode(struct inode *inode);
int reiserfs_write_inode(struct inode *inode, struct writeback_control *wbc);
int reiserfs_get_block(struct inode *inode, sector_t block,
struct buffer_head *bh_result, int create);
i_link_saved_truncate_mask = 0x0020,
i_has_xattr_dir = 0x0040,
i_data_log = 0x0080,
- i_ever_mapped = 0x0100
} reiserfs_inode_flags;
struct reiserfs_inode_info {
** flushed */
unsigned int i_trans_id;
struct reiserfs_journal_list *i_jl;
- struct mutex i_mmap;
+ atomic_t openers;
+ struct mutex tailpack;
#ifdef CONFIG_REISERFS_FS_XATTR
struct rw_semaphore i_xattr_sem;
#endif
unsigned long rlim_max;
};
+#define RLIM64_INFINITY (~0ULL)
+
+struct rlimit64 {
+ __u64 rlim_cur;
+ __u64 rlim_max;
+};
+
#define PRIO_MIN (-20)
#define PRIO_MAX 20
struct task_struct;
int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
+int do_prlimit(struct task_struct *tsk, unsigned int resource,
+ struct rlimit *new_rlim, struct rlimit *old_rlim);
#endif /* __KERNEL__ */
void page_add_file_rmap(struct page *);
void page_remove_rmap(struct page *);
+void hugepage_add_anon_rmap(struct page *, struct vm_area_struct *,
+ unsigned long);
+void hugepage_add_new_anon_rmap(struct page *, struct vm_area_struct *,
+ unsigned long);
+
static inline void page_dup_rmap(struct page *page)
{
atomic_inc(&page->_mapcount);
--- /dev/null
+#ifndef _S3C_ADC_BATTERY_H
+#define _S3C_ADC_BATTERY_H
+
+struct s3c_adc_bat_thresh {
+ int volt; /* mV */
+ int cur; /* mA */
+ int level; /* percent */
+};
+
+struct s3c_adc_bat_pdata {
+ int (*init)(void);
+ void (*exit)(void);
+ void (*enable_charger)(void);
+ void (*disable_charger)(void);
+
+ int gpio_charge_finished;
+
+ const struct s3c_adc_bat_thresh *lut_noac;
+ unsigned int lut_noac_cnt;
+ const struct s3c_adc_bat_thresh *lut_acin;
+ unsigned int lut_acin_cnt;
+
+ const unsigned int volt_channel;
+ const unsigned int current_channel;
+ const unsigned int backup_volt_channel;
+
+ const unsigned int volt_mult;
+ const unsigned int current_mult;
+ const unsigned int backup_volt_mult;
+ const unsigned int internal_impedance;
+
+ const unsigned int backup_volt_max;
+ const unsigned int backup_volt_min;
+};
+
+#endif
extern int allow_signal(int);
extern int disallow_signal(int);
-extern int do_execve(char *, char __user * __user *, char __user * __user *, struct pt_regs *);
+extern int do_execve(const char *,
+ const char __user * const __user *,
+ const char __user * const __user *, struct pt_regs *);
extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *);
struct task_struct *fork_idle(int);
#define __LINUX_SECURITY_H
#include <linux/fs.h>
+#include <linux/fsnotify.h>
#include <linux/binfmts.h>
#include <linux/signal.h>
#include <linux/resource.h>
int (*task_setnice) (struct task_struct *p, int nice);
int (*task_setioprio) (struct task_struct *p, int ioprio);
int (*task_getioprio) (struct task_struct *p);
- int (*task_setrlimit) (unsigned int resource, struct rlimit *new_rlim);
+ int (*task_setrlimit) (struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim);
int (*task_setscheduler) (struct task_struct *p, int policy,
struct sched_param *lp);
int (*task_getscheduler) (struct task_struct *p);
int security_task_setnice(struct task_struct *p, int nice);
int security_task_setioprio(struct task_struct *p, int ioprio);
int security_task_getioprio(struct task_struct *p);
-int security_task_setrlimit(unsigned int resource, struct rlimit *new_rlim);
+int security_task_setrlimit(struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim);
int security_task_setscheduler(struct task_struct *p,
int policy, struct sched_param *lp);
int security_task_getscheduler(struct task_struct *p);
return 0;
}
-static inline int security_task_setrlimit(unsigned int resource,
+static inline int security_task_setrlimit(struct task_struct *p,
+ unsigned int resource,
struct rlimit *new_rlim)
{
return 0;
#define PORT_16654 11
#define PORT_16850 12
#define PORT_RSA 13 /* RSA-DV II/S card */
-#define PORT_MAX 13
+#define PORT_U6_16550A 14
+#define PORT_MAX 14
#define SERIAL_IO_PORT 0
#define SERIAL_IO_HUB6 1
#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
-#define ASYNC_FLAGS ((1U << ASYNCB_LAST_USER) - 1)
+#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
#define ASYNC_USR_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI| \
ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY)
#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
#define SER_RS485_ENABLED (1 << 0)
#define SER_RS485_RTS_ON_SEND (1 << 1)
#define SER_RS485_RTS_AFTER_SEND (1 << 2)
+#define SER_RS485_RTS_BEFORE_SEND (1 << 3)
__u32 delay_rts_before_send; /* Milliseconds */
- __u32 padding[6]; /* Memory is cheap, new structs
+ __u32 delay_rts_after_send; /* Milliseconds */
+ __u32 padding[5]; /* Memory is cheap, new structs
are a royal PITA .. */
};
unsigned int type; /* If UPF_FIXED_TYPE */
unsigned int (*serial_in)(struct uart_port *, int);
void (*serial_out)(struct uart_port *, int, int);
+ void (*set_termios)(struct uart_port *,
+ struct ktermios *new,
+ struct ktermios *old);
};
/*
extern int serial8250_find_port(struct uart_port *p);
extern int serial8250_find_port_for_earlycon(void);
extern int setup_early_serial8250_console(char *cmdline);
+extern void serial8250_do_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old);
#endif
#define PORT_ALTERA_JTAGUART 91
#define PORT_ALTERA_UART 92
+/* SH-SCI */
+#define PORT_SCIFB 93
+
+/* MAX3107 */
+#define PORT_MAX3107 94
+
+/* High Speed UART for Medfield */
+#define PORT_MFD 95
+
#ifdef __KERNEL__
#include <linux/compiler.h>
void (*flush_buffer)(struct uart_port *);
void (*set_termios)(struct uart_port *, struct ktermios *new,
struct ktermios *old);
- void (*set_ldisc)(struct uart_port *);
+ void (*set_ldisc)(struct uart_port *, int new);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
int (*set_wake)(struct uart_port *, unsigned int state);
unsigned char __iomem *membase; /* read/write[bwl] */
unsigned int (*serial_in)(struct uart_port *, int);
void (*serial_out)(struct uart_port *, int, int);
+ void (*set_termios)(struct uart_port *,
+ struct ktermios *new,
+ struct ktermios *old);
unsigned int irq; /* irq number */
unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
--- /dev/null
+#ifndef _SERIAL_MFD_H_
+#define _SERIAL_MFD_H_
+
+/* HW register offset definition */
+#define UART_FOR 0x08
+#define UART_PS 0x0C
+#define UART_MUL 0x0D
+#define UART_DIV 0x0E
+
+#define HSU_GBL_IEN 0x0
+#define HSU_GBL_IST 0x4
+
+#define HSU_GBL_INT_BIT_PORT0 0x0
+#define HSU_GBL_INT_BIT_PORT1 0x1
+#define HSU_GBL_INT_BIT_PORT2 0x2
+#define HSU_GBL_INT_BIT_IRI 0x3
+#define HSU_GBL_INT_BIT_HDLC 0x4
+#define HSU_GBL_INT_BIT_DMA 0x5
+
+#define HSU_GBL_ISR 0x8
+#define HSU_GBL_DMASR 0x400
+#define HSU_GBL_DMAISR 0x404
+
+#define HSU_PORT_REG_OFFSET 0x80
+#define HSU_PORT0_REG_OFFSET 0x80
+#define HSU_PORT1_REG_OFFSET 0x100
+#define HSU_PORT2_REG_OFFSET 0x180
+#define HSU_PORT_REG_LENGTH 0x80
+
+#define HSU_DMA_CHANS_REG_OFFSET 0x500
+#define HSU_DMA_CHANS_REG_LENGTH 0x40
+
+#define HSU_CH_SR 0x0 /* channel status reg */
+#define HSU_CH_CR 0x4 /* control reg */
+#define HSU_CH_DCR 0x8 /* descriptor control reg */
+#define HSU_CH_BSR 0x10 /* max fifo buffer size reg */
+#define HSU_CH_MOTSR 0x14 /* minimum ocp transfer size */
+#define HSU_CH_D0SAR 0x20 /* desc 0 start addr */
+#define HSU_CH_D0TSR 0x24 /* desc 0 transfer size */
+#define HSU_CH_D1SAR 0x28
+#define HSU_CH_D1TSR 0x2C
+#define HSU_CH_D2SAR 0x30
+#define HSU_CH_D2TSR 0x34
+#define HSU_CH_D3SAR 0x38
+#define HSU_CH_D3TSR 0x3C
+
+#endif
#define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */
#define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */
+/*
+ * Intel MID on-chip HSU (High Speed UART) defined bits
+ */
+#define UART_FCR_HSU_64_1B 0x00 /* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_64_16B 0x40 /* receive FIFO treshold = 16 */
+#define UART_FCR_HSU_64_32B 0x80 /* receive FIFO treshold = 32 */
+#define UART_FCR_HSU_64_56B 0xc0 /* receive FIFO treshold = 56 */
+
+#define UART_FCR_HSU_16_1B 0x00 /* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_16_4B 0x40 /* receive FIFO treshold = 4 */
+#define UART_FCR_HSU_16_8B 0x80 /* receive FIFO treshold = 8 */
+#define UART_FCR_HSU_16_14B 0xc0 /* receive FIFO treshold = 14 */
+#define UART_FCR_HSU_64B_FIFO 0x20 /* chose 64 bytes FIFO */
+#define UART_FCR_HSU_16B_FIFO 0x00 /* chose 16 bytes FIFO */
+#define UART_FCR_HALF_EMPT_TXI 0x00 /* trigger TX_EMPT IRQ for half empty */
+#define UART_FCR_FULL_EMPT_TXI 0x08 /* trigger TX_EMPT IRQ for full empty */
/*
* These register definitions are for the 16C950
int id;
struct clk *parent;
+ struct clk **parent_table; /* list of parents to */
+ unsigned short parent_num; /* choose between */
+ unsigned char src_shift; /* source clock field in the */
+ unsigned char src_width; /* configuration register */
struct clk_ops *ops;
struct list_head children;
int sh_clk_div4_reparent_register(struct clk *clks, int nr,
struct clk_div4_table *table);
-#define SH_CLK_DIV6(_parent, _reg, _flags) \
-{ \
- .parent = _parent, \
- .enable_reg = (void __iomem *)_reg, \
- .flags = _flags, \
+#define SH_CLK_DIV6_EXT(_parent, _reg, _flags, _parents, \
+ _num_parents, _src_shift, _src_width) \
+{ \
+ .parent = _parent, \
+ .enable_reg = (void __iomem *)_reg, \
+ .flags = _flags, \
+ .parent_table = _parents, \
+ .parent_num = _num_parents, \
+ .src_shift = _src_shift, \
+ .src_width = _src_width, \
}
+#define SH_CLK_DIV6(_parent, _reg, _flags) \
+ SH_CLK_DIV6_EXT(_parent, _reg, _flags, NULL, 0, 0, 0)
+
int sh_clk_div6_register(struct clk *clks, int nr);
+int sh_clk_div6_reparent_register(struct clk *clks, int nr);
#endif /* __SH_CLOCK_H */
#include <trace/events/kmem.h>
-#ifndef ARCH_KMALLOC_MINALIGN
/*
* Enforce a minimum alignment for the kmalloc caches.
* Usually, the kmalloc caches are cache_line_size() aligned, except when
* ARCH_KMALLOC_MINALIGN allows that.
* Note that increasing this value may disable some debug features.
*/
+#ifdef ARCH_DMA_MINALIGN
+#define ARCH_KMALLOC_MINALIGN ARCH_DMA_MINALIGN
+#else
#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
#endif
#ifndef __LINUX_SLOB_DEF_H
#define __LINUX_SLOB_DEF_H
-#ifndef ARCH_KMALLOC_MINALIGN
+#ifdef ARCH_DMA_MINALIGN
+#define ARCH_KMALLOC_MINALIGN ARCH_DMA_MINALIGN
+#else
#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long)
#endif
/*
* Kmalloc subsystem.
*/
-#if defined(ARCH_KMALLOC_MINALIGN) && ARCH_KMALLOC_MINALIGN > 8
-#define KMALLOC_MIN_SIZE ARCH_KMALLOC_MINALIGN
+#if defined(ARCH_DMA_MINALIGN) && ARCH_DMA_MINALIGN > 8
+#define KMALLOC_MIN_SIZE ARCH_DMA_MINALIGN
#else
#define KMALLOC_MIN_SIZE 8
#endif
#define KMALLOC_SHIFT_LOW ilog2(KMALLOC_MIN_SIZE)
-#ifndef ARCH_KMALLOC_MINALIGN
+#ifdef ARCH_DMA_MINALIGN
+#define ARCH_KMALLOC_MINALIGN ARCH_DMA_MINALIGN
+#else
#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
#endif
struct mutex lock;
u8 port_config[8]; /* field 0 is unused */
u32 out_level; /* cached output levels */
+ u32 input_pullup_active;
struct gpio_chip chip;
struct device *dev;
int (*write)(struct device *dev, unsigned int reg, unsigned int val);
struct max7301_platform_data {
/* number assigned to the first GPIO */
unsigned base;
+ /*
+ * bitmask controlling the pullup configuration,
+ *
+ * _note_ the 4 lowest bits are unused, because the first 4
+ * ports of the controller are not used, too.
+ */
+ u32 input_pullup_active;
};
extern int __max730x_remove(struct device *dev);
* @dma_alignment: SPI controller constraint on DMA buffers alignment.
* @mode_bits: flags understood by this controller driver
* @flags: other constraints relevant to this driver
+ * @bus_lock_spinlock: spinlock for SPI bus locking
+ * @bus_lock_mutex: mutex for SPI bus locking
+ * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use
* @setup: updates the device mode and clocking records used by a
* device's SPI controller; protocol code may call this. This
* must fail if an unrecognized or unsupported mode is requested.
#define SPI_MASTER_NO_RX BIT(1) /* can't do buffer read */
#define SPI_MASTER_NO_TX BIT(2) /* can't do buffer write */
+ /* lock and mutex for SPI bus locking */
+ spinlock_t bus_lock_spinlock;
+ struct mutex bus_lock_mutex;
+
+ /* flag indicating that the SPI bus is locked for exclusive use */
+ bool bus_lock_flag;
+
/* Setup mode and clock, etc (spi driver may call many times).
*
* IMPORTANT: this may be called when transfers to another
extern int spi_setup(struct spi_device *spi);
extern int spi_async(struct spi_device *spi, struct spi_message *message);
+extern int spi_async_locked(struct spi_device *spi,
+ struct spi_message *message);
/*---------------------------------------------------------------------------*/
*/
extern int spi_sync(struct spi_device *spi, struct spi_message *message);
+extern int spi_sync_locked(struct spi_device *spi, struct spi_message *message);
+extern int spi_bus_lock(struct spi_master *master);
+extern int spi_bus_unlock(struct spi_master *master);
/**
* spi_write - SPI synchronous write
* SPI_GPIO_NO_CHIPSELECT to the controller_data:
* .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT;
*
+ * If the MISO or MOSI pin is not available then it should be set to
+ * SPI_GPIO_NO_MISO or SPI_GPIO_NO_MOSI.
+ *
* If the bitbanged bus is later switched to a "native" controller,
* that platform_device and controller_data should be removed.
*/
#define SPI_GPIO_NO_CHIPSELECT ((unsigned long)-1l)
+#define SPI_GPIO_NO_MISO ((unsigned long)-1l)
+#define SPI_GPIO_NO_MOSI ((unsigned long)-1l)
/**
* struct spi_gpio_platform_data - parameter for bitbanged SPI master
#define _LINUX_STATFS_H
#include <linux/types.h>
-
#include <asm/statfs.h>
struct kstatfs {
__kernel_fsid_t f_fsid;
long f_namelen;
long f_frsize;
- long f_spare[5];
+ long f_flags;
+ long f_spare[4];
};
+/*
+ * Definitions for the flag in f_flag.
+ *
+ * Generally these flags are equivalent to the MS_ flags used in the mount
+ * ABI. The exception is ST_VALID which has the same value as MS_REMOUNT
+ * which doesn't make any sense for statfs.
+ */
+#define ST_RDONLY 0x0001 /* mount read-only */
+#define ST_NOSUID 0x0002 /* ignore suid and sgid bits */
+#define ST_NODEV 0x0004 /* disallow access to device special files */
+#define ST_NOEXEC 0x0008 /* disallow program execution */
+#define ST_SYNCHRONOUS 0x0010 /* writes are synced at once */
+#define ST_VALID 0x0020 /* f_flags support is implemented */
+#define ST_MANDLOCK 0x0040 /* allow mandatory locks on an FS */
+/* 0x0080 used for ST_WRITE in glibc */
+/* 0x0100 used for ST_APPEND in glibc */
+/* 0x0200 used for ST_IMMUTABLE in glibc */
+#define ST_NOATIME 0x0400 /* do not update access times */
+#define ST_NODIRATIME 0x0800 /* do not update directory access times */
+#define ST_RELATIME 0x1000 /* update atime relative to mtime/ctime */
+
#endif
-unifdef-y += debug.h
+header-y += debug.h
extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
gfp_t gfp_mask, bool noswap,
unsigned int swappiness,
- struct zone *zone,
- int nid);
+ struct zone *zone);
extern int __isolate_lru_page(struct page *page, int mode, int file);
extern unsigned long shrink_all_memory(unsigned long nr_pages);
extern int vm_swappiness;
struct old_utsname;
struct pollfd;
struct rlimit;
+struct rlimit64;
struct rusage;
struct sched_param;
struct sel_arg_struct;
asmlinkage long sys_oldumount(char __user *name);
asmlinkage long sys_truncate(const char __user *path, long length);
asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length);
-asmlinkage long sys_stat(char __user *filename,
+asmlinkage long sys_stat(const char __user *filename,
struct __old_kernel_stat __user *statbuf);
asmlinkage long sys_statfs(const char __user * path,
struct statfs __user *buf);
asmlinkage long sys_fstatfs(unsigned int fd, struct statfs __user *buf);
asmlinkage long sys_fstatfs64(unsigned int fd, size_t sz,
struct statfs64 __user *buf);
-asmlinkage long sys_lstat(char __user *filename,
+asmlinkage long sys_lstat(const char __user *filename,
struct __old_kernel_stat __user *statbuf);
asmlinkage long sys_fstat(unsigned int fd,
struct __old_kernel_stat __user *statbuf);
-asmlinkage long sys_newstat(char __user *filename,
+asmlinkage long sys_newstat(const char __user *filename,
struct stat __user *statbuf);
-asmlinkage long sys_newlstat(char __user *filename,
+asmlinkage long sys_newlstat(const char __user *filename,
struct stat __user *statbuf);
asmlinkage long sys_newfstat(unsigned int fd, struct stat __user *statbuf);
asmlinkage long sys_ustat(unsigned dev, struct ustat __user *ubuf);
#if BITS_PER_LONG == 32
-asmlinkage long sys_stat64(char __user *filename,
+asmlinkage long sys_stat64(const char __user *filename,
struct stat64 __user *statbuf);
asmlinkage long sys_fstat64(unsigned long fd, struct stat64 __user *statbuf);
-asmlinkage long sys_lstat64(char __user *filename,
+asmlinkage long sys_lstat64(const char __user *filename,
struct stat64 __user *statbuf);
asmlinkage long sys_truncate64(const char __user *path, loff_t length);
asmlinkage long sys_ftruncate64(unsigned int fd, loff_t length);
#endif
asmlinkage long sys_setrlimit(unsigned int resource,
struct rlimit __user *rlim);
+asmlinkage long sys_prlimit64(pid_t pid, unsigned int resource,
+ const struct rlimit64 __user *new_rlim,
+ struct rlimit64 __user *old_rlim);
asmlinkage long sys_getrusage(int who, struct rusage __user *ru);
asmlinkage long sys_umask(int mask);
int newdfd, const char __user *newname, int flags);
asmlinkage long sys_renameat(int olddfd, const char __user * oldname,
int newdfd, const char __user * newname);
-asmlinkage long sys_futimesat(int dfd, char __user *filename,
+asmlinkage long sys_futimesat(int dfd, const char __user *filename,
struct timeval __user *utimes);
asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode);
asmlinkage long sys_fchmodat(int dfd, const char __user * filename,
gid_t group, int flag);
asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
int mode);
-asmlinkage long sys_newfstatat(int dfd, char __user *filename,
+asmlinkage long sys_newfstatat(int dfd, const char __user *filename,
struct stat __user *statbuf, int flag);
-asmlinkage long sys_fstatat64(int dfd, char __user *filename,
+asmlinkage long sys_fstatat64(int dfd, const char __user *filename,
struct stat64 __user *statbuf, int flag);
asmlinkage long sys_readlinkat(int dfd, const char __user *path, char __user *buf,
int bufsiz);
-asmlinkage long sys_utimensat(int dfd, char __user *filename,
+asmlinkage long sys_utimensat(int dfd, const char __user *filename,
struct timespec __user *utimes, int flags);
asmlinkage long sys_unshare(unsigned long unshare_flags);
asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
struct timespec __user *, const sigset_t __user *,
size_t);
+asmlinkage long sys_fanotify_init(unsigned int flags, unsigned int event_f_flags);
+asmlinkage long sys_fanotify_mark(int fanotify_fd, unsigned int flags,
+ u64 mask, int fd,
+ const char __user *pathname);
-int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
+int kernel_execve(const char *filename, const char *const argv[], const char *const envp[]);
asmlinkage long sys_perf_event_open(
char s_fname[6]; /* file system name */
char s_fpack[6]; /* file system pack name */
};
+/* Constants to aid sanity checking */
+/* This is not a hard limit, nor enforced by v7 kernel. It's actually just
+ * the limit used by Seventh Edition's ls, though is high enough to assume
+ * that no reasonable file system would have that much entries in root
+ * directory. Thus, if we see anything higher, we just probably got the
+ * endiannes wrong. */
+#define V7_NFILES 1024
+/* The disk addresses are three-byte (despite direct block addresses being
+ * aligned word-wise in inode). If the most significant byte is non-zero,
+ * something is most likely wrong (not a filesystem, bad bytesex). */
+#define V7_MAXSIZE 0x00ffffff
/* Coherent super-block data on disk */
#define COH_NICINOD 100 /* number of inode cache entries */
#define NSEC_PER_MSEC 1000000L
#define USEC_PER_SEC 1000000L
#define NSEC_PER_SEC 1000000000L
-#define FSEC_PER_SEC 1000000000000000L
+#define FSEC_PER_SEC 1000000000000000LL
#define TIME_T_MAX (time_t)((1UL << ((sizeof(time_t) << 3) - 1)) - 1)
extern int do_settimeofday(struct timespec *tv);
extern int do_sys_settimeofday(struct timespec *tv, struct timezone *tz);
#define do_posix_clock_monotonic_gettime(ts) ktime_get_ts(ts)
-extern long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags);
+extern long do_utimes(int dfd, const char __user *filename, struct timespec *times, int flags);
struct itimerval;
extern int do_setitimer(int which, struct itimerval *value,
struct itimerval *ovalue);
#include <linux/tty_driver.h>
#include <linux/tty_ldisc.h>
#include <linux/mutex.h>
+#include <linux/smp_lock.h>
#include <asm/system.h>
#define L_FLUSHO(tty) _L_FLAG((tty), FLUSHO)
#define L_PENDIN(tty) _L_FLAG((tty), PENDIN)
#define L_IEXTEN(tty) _L_FLAG((tty), IEXTEN)
+#define L_EXTPROC(tty) _L_FLAG((tty), EXTPROC)
struct device;
struct signal_struct;
struct tty_port *port;
};
+/* Each of a tty's open files has private_data pointing to tty_file_private */
+struct tty_file_private {
+ struct tty_struct *tty;
+ struct file *file;
+ struct list_head list;
+};
+
/* tty magic number */
#define TTY_MAGIC 0x5401
extern int tty_signal(int sig, struct tty_struct *tty);
extern void tty_hangup(struct tty_struct *tty);
extern void tty_vhangup(struct tty_struct *tty);
+extern void tty_vhangup_locked(struct tty_struct *tty);
extern void tty_vhangup_self(void);
extern void tty_unhangup(struct file *filp);
extern int tty_hung_up_p(struct file *filp);
extern struct tty_struct *get_current_tty(void);
extern void tty_default_fops(struct file_operations *fops);
extern struct tty_struct *alloc_tty_struct(void);
+extern void tty_add_file(struct tty_struct *tty, struct file *file);
extern void free_tty_struct(struct tty_struct *tty);
extern void initialize_tty_struct(struct tty_struct *tty,
struct tty_driver *driver, int idx);
extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty);
extern struct mutex tty_mutex;
+extern spinlock_t tty_files_lock;
extern void tty_write_unlock(struct tty_struct *tty);
extern int tty_write_lock(struct tty_struct *tty, int ndelay);
extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg);
+/* tty_mutex.c */
+/* functions for preparation of BKL removal */
+extern void __lockfunc tty_lock(void) __acquires(tty_lock);
+extern void __lockfunc tty_unlock(void) __releases(tty_lock);
+extern struct task_struct *__big_tty_mutex_owner;
+#define tty_locked() (current == __big_tty_mutex_owner)
+
+/*
+ * wait_event_interruptible_tty -- wait for a condition with the tty lock held
+ *
+ * The condition we are waiting for might take a long time to
+ * become true, or might depend on another thread taking the
+ * BTM. In either case, we need to drop the BTM to guarantee
+ * forward progress. This is a leftover from the conversion
+ * from the BKL and should eventually get removed as the BTM
+ * falls out of use.
+ *
+ * Do not use in new code.
+ */
+#define wait_event_interruptible_tty(wq, condition) \
+({ \
+ int __ret = 0; \
+ if (!(condition)) { \
+ __wait_event_interruptible_tty(wq, condition, __ret); \
+ } \
+ __ret; \
+})
+
+#define __wait_event_interruptible_tty(wq, condition, ret) \
+do { \
+ DEFINE_WAIT(__wait); \
+ \
+ for (;;) { \
+ prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE); \
+ if (condition) \
+ break; \
+ if (!signal_pending(current)) { \
+ tty_unlock(); \
+ schedule(); \
+ tty_lock(); \
+ continue; \
+ } \
+ ret = -ERESTARTSYS; \
+ break; \
+ } \
+ finish_wait(&wq, &__wait); \
+} while (0)
+
+
#endif /* __KERNEL__ */
#endif
* queued reset so that usb_cancel_queued_reset() doesn't try to
* remove from the workqueue when running inside the worker
* thread. See __usb_queue_reset_device().
+ * @resetting_device: USB core reset the device, so use alt setting 0 as
+ * current; needs bandwidth alloc after reset.
*
* USB device drivers attach to interfaces on a physical device. Each
* interface encapsulates a single high level function, such as feeding
void (*disconnect) (struct usb_interface *intf);
- int (*ioctl) (struct usb_interface *intf, unsigned int code,
+ int (*unlocked_ioctl) (struct usb_interface *intf, unsigned int code,
void *buf);
int (*suspend) (struct usb_interface *intf, pm_message_t message);
* is a different endpoint (and pipe) from "out" endpoint two.
* The current configuration controls the existence, type, and
* maximum packet size of any given endpoint.
+ * @stream_id: the endpoint's stream ID for bulk streams
* @dev: Identifies the USB device to perform the request.
* @status: This is read in non-iso completion functions to get the
* status of the particular request. ISO requests only use it
int (*bind)(struct usb_composite_dev *);
int (*unbind)(struct usb_composite_dev *);
+ void (*disconnect)(struct usb_composite_dev *);
+
/* global suspend hooks */
void (*suspend)(struct usb_composite_dev *);
void (*resume)(struct usb_composite_dev *);
};
extern int usb_string_id(struct usb_composite_dev *c);
+extern int usb_string_ids_tab(struct usb_composite_dev *c,
+ struct usb_string *str);
+extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
+
/* messaging utils */
#define DBG(d, fmt, args...) \
#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
u32 hcc_params; /* HCCPARAMS - offset 0x8 */
+/* EHCI 1.1 addendum */
+#define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19))
+#define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18))
+#define HCC_LPM(p) ((p)&(1 << 17))
+#define HCC_HW_PREFETCH(p) ((p)&(1 << 16))
+
#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
/* USBCMD: offset 0x00 */
u32 command;
+
+/* EHCI 1.1 addendum */
+#define CMD_HIRD (0xf<<24) /* host initiated resume duration */
+#define CMD_PPCEE (1<<15) /* per port change event enable */
+#define CMD_FSP (1<<14) /* fully synchronized prefetch */
+#define CMD_ASPE (1<<13) /* async schedule prefetch enable */
+#define CMD_PSPE (1<<12) /* periodic schedule prefetch enable */
/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
#define CMD_PARK (1<<11) /* enable "park" on async qh */
#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
/* USBSTS: offset 0x04 */
u32 status;
+#define STS_PPCE_MASK (0xff<<16) /* Per-Port change event 1-16 */
#define STS_ASS (1<<15) /* Async Schedule Status */
#define STS_PSS (1<<14) /* Periodic Schedule Status */
#define STS_RECL (1<<13) /* Reclamation */
/* PORTSC: offset 0x44 */
u32 port_status[0]; /* up to N_PORTS */
+/* EHCI 1.1 addendum */
+#define PORTSC_SUSPEND_STS_ACK 0
+#define PORTSC_SUSPEND_STS_NYET 1
+#define PORTSC_SUSPEND_STS_STALL 2
+#define PORTSC_SUSPEND_STS_ERR 3
+
+#define PORT_DEV_ADDR (0x7f<<25) /* device address */
+#define PORT_SSTS (0x3<<23) /* suspend status */
/* 31:23 reserved */
#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
/* 9 reserved */
+#define PORT_LPM (1<<9) /* LPM transaction */
#define PORT_RESET (1<<8) /* reset port */
#define PORT_SUSPEND (1<<7) /* suspend port */
#define PORT_RESUME (1<<6) /* resume it */
static void functionfs_unbind(struct ffs_data *ffs)
__attribute__((nonnull));
-static int functionfs_add(struct usb_composite_dev *cdev,
- struct usb_configuration *c,
- struct ffs_data *ffs)
+static int functionfs_bind_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *c,
+ struct ffs_data *ffs)
__attribute__((warn_unused_result, nonnull));
*/
const struct hc_driver *driver; /* hw-specific hooks */
- /* Flags that need to be manipulated atomically */
+ /* Flags that need to be manipulated atomically because they can
+ * change while the host controller is running. Always use
+ * set_bit() or clear_bit() to change their values.
+ */
unsigned long flags;
-#define HCD_FLAG_HW_ACCESSIBLE 0x00000001
-#define HCD_FLAG_SAW_IRQ 0x00000002
+#define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */
+#define HCD_FLAG_SAW_IRQ 1
+#define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
+#define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
+#define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
+
+ /* The flags can be tested using these macros; they are likely to
+ * be slightly faster than test_bit().
+ */
+#define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
+#define HCD_SAW_IRQ(hcd) ((hcd)->flags & (1U << HCD_FLAG_SAW_IRQ))
+#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
+#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
+#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
+ /* Flags that get set only during HCD registration or removal. */
unsigned rh_registered:1;/* is root hub registered? */
+ unsigned rh_pollable:1; /* may we poll the root hub? */
/* The next flag is a stopgap, to be removed when all the HCDs
* support the new root-hub polling mechanism. */
unsigned uses_new_polling:1;
- unsigned poll_rh:1; /* poll for rh status? */
- unsigned poll_pending:1; /* status has changed? */
unsigned wireless:1; /* Wireless USB HCD */
unsigned authorized_default:1;
unsigned has_tt:1; /* Integrated TT in root hub */
* a whole, not just the root hub; they're for PCI bus glue.
*/
/* called after suspending the hub, before entering D3 etc */
- int (*pci_suspend)(struct usb_hcd *hcd);
+ int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
/* called after entering D0 (etc), before resuming the hub */
int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags);
int (*reset_device)(struct usb_hcd *, struct usb_device *);
+ /* Notifies the HCD after a device is connected and its
+ * address is set
+ */
+ int (*update_device)(struct usb_hcd *, struct usb_device *);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
USB_EVENT_ENUMERATED, /* gadget driver enumerated */
};
-#define USB_OTG_PULLUP_ID (1 << 0)
-#define USB_OTG_PULLDOWN_DP (1 << 1)
-#define USB_OTG_PULLDOWN_DM (1 << 2)
-#define USB_OTG_EXT_VBUS_INDICATOR (1 << 3)
-#define USB_OTG_DRV_VBUS (1 << 4)
-#define USB_OTG_DRV_VBUS_EXT (1 << 5)
-
struct otg_transceiver;
/* for transceivers connected thru an ULPI interface, the user must
return -EINVAL;
}
-static inline int otg_io_write(struct otg_transceiver *otg, u32 reg, u32 val)
+static inline int otg_io_write(struct otg_transceiver *otg, u32 val, u32 reg)
{
if (otg->io_ops && otg->io_ops->write)
- return otg->io_ops->write(otg, reg, val);
+ return otg->io_ops->write(otg, val, reg);
return -EINVAL;
}
and can't handle talking to these interfaces */
#define USB_QUIRK_HONOR_BNUMINTERFACES 0x00000020
+/* device needs a pause during initialization, after we read the device
+ descriptor */
+#define USB_QUIRK_DELAY_INIT 0x00000040
+
#endif /* __LINUX_USB_QUIRKS_H */
#ifndef __LINUX_USB_ULPI_H
#define __LINUX_USB_ULPI_H
+#include <linux/usb/otg.h>
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ULPI Flags
+ */
+#define ULPI_OTG_ID_PULLUP (1 << 0)
+#define ULPI_OTG_DP_PULLDOWN_DIS (1 << 1)
+#define ULPI_OTG_DM_PULLDOWN_DIS (1 << 2)
+#define ULPI_OTG_DISCHRGVBUS (1 << 3)
+#define ULPI_OTG_CHRGVBUS (1 << 4)
+#define ULPI_OTG_DRVVBUS (1 << 5)
+#define ULPI_OTG_DRVVBUS_EXT (1 << 6)
+#define ULPI_OTG_EXTVBUSIND (1 << 7)
+
+#define ULPI_IC_6PIN_SERIAL (1 << 8)
+#define ULPI_IC_3PIN_SERIAL (1 << 9)
+#define ULPI_IC_CARKIT (1 << 10)
+#define ULPI_IC_CLKSUSPM (1 << 11)
+#define ULPI_IC_AUTORESUME (1 << 12)
+#define ULPI_IC_EXTVBUS_INDINV (1 << 13)
+#define ULPI_IC_IND_PASSTHRU (1 << 14)
+#define ULPI_IC_PROTECT_DIS (1 << 15)
+
+#define ULPI_FC_HS (1 << 16)
+#define ULPI_FC_FS (1 << 17)
+#define ULPI_FC_LS (1 << 18)
+#define ULPI_FC_FS4LS (1 << 19)
+#define ULPI_FC_TERMSEL (1 << 20)
+#define ULPI_FC_OP_NORM (1 << 21)
+#define ULPI_FC_OP_NODRV (1 << 22)
+#define ULPI_FC_OP_DIS_NRZI (1 << 23)
+#define ULPI_FC_OP_NSYNC_NEOP (1 << 24)
+#define ULPI_FC_RST (1 << 25)
+#define ULPI_FC_SUSPM (1 << 26)
+
/*-------------------------------------------------------------------------*/
/*
/*-------------------------------------------------------------------------*/
+/*
+ * Register Bits
+ */
+
/* Function Control */
#define ULPI_FUNC_CTRL_XCVRSEL (1 << 0)
#define ULPI_FUNC_CTRL_XCVRSEL_MASK (3 << 0)
#ifndef LINUX_VGA_H
#define LINUX_VGA_H
-#include <asm/vga.h>
/* Legacy VGA regions */
#define VGA_RSRC_NONE 0x00
#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */
#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */
#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */
+#define V4L2_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */
#define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */
#define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */
#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */
#define _LINUX_VIRTIO_9P_H
/* This header is BSD licensed so anyone can use the definitions to implement
* compatible drivers/servers. */
+#include <linux/types.h>
#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
#include <linux/types.h>
struct vm_area_struct; /* vma defining user mapping in mm_types.h */
+extern bool vmap_lazy_unmap;
+
/* bits in flags of vmalloc's vm_struct below */
#define VM_IOREMAP 0x00000001 /* ioremap() and friends */
#define VM_ALLOC 0x00000002 /* vmalloc() */
#define vc_translate(vc, c) ((vc)->vc_translate[(c) | \
((vc)->vc_toggle_meta ? 0x80 : 0)])
#else
-#define con_set_trans_old(arg) (0)
-#define con_get_trans_old(arg) (-EINVAL)
-#define con_set_trans_new(arg) (0)
-#define con_get_trans_new(arg) (-EINVAL)
-#define con_clear_unimap(vc, ui) (0)
-#define con_set_unimap(vc, ct, list) (0)
-#define con_set_default_unimap(vc) (0)
-#define con_copy_unimap(d, s) (0)
-#define con_get_unimap(vc, ct, uct, list) (-EINVAL)
-#define con_free_unimap(vc) do { ; } while (0)
-#define con_protect_unimap(vc, rdonly) do { ; } while (0)
+static inline int con_set_trans_old(unsigned char __user *table)
+{
+ return 0;
+}
+static inline int con_get_trans_old(unsigned char __user *table)
+{
+ return -EINVAL;
+}
+static inline int con_set_trans_new(unsigned short __user *table)
+{
+ return 0;
+}
+static inline int con_get_trans_new(unsigned short __user *table)
+{
+ return -EINVAL;
+}
+static inline int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
+{
+ return 0;
+}
+static inline
+int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
+{
+ return 0;
+}
+static inline
+int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct,
+ struct unipair __user *list)
+{
+ return -EINVAL;
+}
+static inline int con_set_default_unimap(struct vc_data *vc)
+{
+ return 0;
+}
+static inline void con_free_unimap(struct vc_data *vc)
+{
+}
+static inline void con_protect_unimap(struct vc_data *vc, int rdonly)
+{
+}
+static inline
+int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc)
+{
+ return 0;
+}
#define vc_translate(vc, c) (c)
#endif
int deflt);
int vty_init(const struct file_operations *console_fops);
+static inline bool vt_force_oops_output(struct vc_data *vc)
+{
+ if (oops_in_progress && vc->vc_panic_force_write)
+ return true;
+ return false;
+}
+
/*
* vc_screen.c shares this temporary buffer with the console write code so that
* we can easily avoid touching user space while holding the console spinlock.
+++ /dev/null
-#ifndef _LINUX_WM97XX_BAT_H
-#define _LINUX_WM97XX_BAT_H
-
-#include <linux/wm97xx.h>
-
-#warning This file will be removed soon, use wm97xx.h instead!
-
-#define wm97xx_batt_info wm97xx_batt_pdata
-
-#ifdef CONFIG_BATTERY_WM97XX
-void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
-#else
-static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {}
-#endif
-
-#endif
int dirty_writeback_centisecs_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-void get_dirty_limits(unsigned long *pbackground, unsigned long *pdirty,
- unsigned long *pbdi_dirty, struct backing_dev_info *bdi);
+void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty);
+unsigned long bdi_dirty_limit(struct backing_dev_info *bdi,
+ unsigned long dirty);
void page_writeback_init(void);
void balance_dirty_pages_ratelimited_nr(struct address_space *mapping,
#ifndef CX2341X_H
#define CX2341X_H
+#include <media/v4l2-ctrls.h>
+
enum cx2341x_port {
CX2341X_PORT_MEMORY = 0,
CX2341X_PORT_STREAMING = 1,
void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p);
void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix);
+struct cx2341x_handler;
+
+struct cx2341x_handler_ops {
+ /* needed for the video clock freq */
+ int (*s_audio_sampling_freq)(struct cx2341x_handler *hdl, u32 val);
+ /* needed for dualwatch */
+ int (*s_audio_mode)(struct cx2341x_handler *hdl, u32 val);
+ /* needed for setting up the video resolution */
+ int (*s_video_encoding)(struct cx2341x_handler *hdl, u32 val);
+ /* needed for setting up the sliced vbi insertion data structures */
+ int (*s_stream_vbi_fmt)(struct cx2341x_handler *hdl, u32 val);
+};
+
+struct cx2341x_handler {
+ u32 capabilities;
+ enum cx2341x_port port;
+ u16 width;
+ u16 height;
+ u16 is_50hz;
+ u32 audio_properties;
+
+ struct v4l2_ctrl_handler hdl;
+ void *priv;
+ cx2341x_mbox_func func;
+ const struct cx2341x_handler_ops *ops;
+
+ struct v4l2_ctrl *stream_vbi_fmt;
+
+ struct {
+ /* audio cluster */
+ struct v4l2_ctrl *audio_sampling_freq;
+ struct v4l2_ctrl *audio_encoding;
+ struct v4l2_ctrl *audio_l2_bitrate;
+ struct v4l2_ctrl *audio_mode;
+ struct v4l2_ctrl *audio_mode_extension;
+ struct v4l2_ctrl *audio_emphasis;
+ struct v4l2_ctrl *audio_crc;
+ struct v4l2_ctrl *audio_ac3_bitrate;
+ };
+
+ struct {
+ /* video gop cluster */
+ struct v4l2_ctrl *video_b_frames;
+ struct v4l2_ctrl *video_gop_size;
+ };
+
+ struct {
+ /* stream type cluster */
+ struct v4l2_ctrl *stream_type;
+ struct v4l2_ctrl *video_encoding;
+ struct v4l2_ctrl *video_bitrate_mode;
+ struct v4l2_ctrl *video_bitrate;
+ struct v4l2_ctrl *video_bitrate_peak;
+ };
+
+ struct {
+ /* video mute cluster */
+ struct v4l2_ctrl *video_mute;
+ struct v4l2_ctrl *video_mute_yuv;
+ };
+
+ struct {
+ /* video filter mode cluster */
+ struct v4l2_ctrl *video_spatial_filter_mode;
+ struct v4l2_ctrl *video_temporal_filter_mode;
+ struct v4l2_ctrl *video_median_filter_type;
+ };
+
+ struct {
+ /* video filter type cluster */
+ struct v4l2_ctrl *video_luma_spatial_filter_type;
+ struct v4l2_ctrl *video_chroma_spatial_filter_type;
+ };
+
+ struct {
+ /* video filter cluster */
+ struct v4l2_ctrl *video_spatial_filter;
+ struct v4l2_ctrl *video_temporal_filter;
+ };
+
+ struct {
+ /* video median cluster */
+ struct v4l2_ctrl *video_luma_median_filter_top;
+ struct v4l2_ctrl *video_luma_median_filter_bottom;
+ struct v4l2_ctrl *video_chroma_median_filter_top;
+ struct v4l2_ctrl *video_chroma_median_filter_bottom;
+ };
+};
+
+int cx2341x_handler_init(struct cx2341x_handler *cxhdl,
+ unsigned nr_of_controls_hint);
+void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz);
+int cx2341x_handler_setup(struct cx2341x_handler *cxhdl);
+void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy);
+
/* Firmware names */
#define CX2341X_FIRM_ENC_FILENAME "v4l-cx2341x-enc.fw"
/* Decoder firmware for the cx23415 only */
CX25840_AUDIO8,
};
+enum cx25840_io_pin {
+ CX25840_PIN_DVALID_PRGM0 = 0,
+ CX25840_PIN_FIELD_PRGM1,
+ CX25840_PIN_HRESET_PRGM2,
+ CX25840_PIN_VRESET_HCTL_PRGM3,
+ CX25840_PIN_IRQ_N_PRGM4,
+ CX25840_PIN_IR_TX_PRGM6,
+ CX25840_PIN_IR_RX_PRGM5,
+ CX25840_PIN_GPIO0_PRGM8,
+ CX25840_PIN_GPIO1_PRGM9,
+ CX25840_PIN_SA_SDIN, /* Alternate GP Input only */
+ CX25840_PIN_SA_SDOUT, /* Alternate GP Input only */
+ CX25840_PIN_PLL_CLK_PRGM7,
+ CX25840_PIN_CHIP_SEL_VIPCLK, /* Output only */
+};
+
+enum cx25840_io_pad {
+ /* Output pads */
+ CX25840_PAD_DEFAULT = 0,
+ CX25840_PAD_ACTIVE,
+ CX25840_PAD_VACTIVE,
+ CX25840_PAD_CBFLAG,
+ CX25840_PAD_VID_DATA_EXT0,
+ CX25840_PAD_VID_DATA_EXT1,
+ CX25840_PAD_GPO0,
+ CX25840_PAD_GPO1,
+ CX25840_PAD_GPO2,
+ CX25840_PAD_GPO3,
+ CX25840_PAD_IRQ_N,
+ CX25840_PAD_AC_SYNC,
+ CX25840_PAD_AC_SDOUT,
+ CX25840_PAD_PLL_CLK,
+ CX25840_PAD_VRESET,
+ CX25840_PAD_RESERVED,
+ /* Pads for PLL_CLK output only */
+ CX25840_PAD_XTI_X5_DLL,
+ CX25840_PAD_AUX_PLL,
+ CX25840_PAD_VID_PLL,
+ CX25840_PAD_XTI,
+ /* Input Pads */
+ CX25840_PAD_GPI0,
+ CX25840_PAD_GPI1,
+ CX25840_PAD_GPI2,
+ CX25840_PAD_GPI3,
+};
+
+enum cx25840_io_pin_strength {
+ CX25840_PIN_DRIVE_MEDIUM = 0,
+ CX25840_PIN_DRIVE_SLOW,
+ CX25840_PIN_DRIVE_FAST,
+};
+
+enum cx23885_io_pin {
+ CX23885_PIN_IR_RX_GPIO19,
+ CX23885_PIN_IR_TX_GPIO20,
+ CX23885_PIN_I2S_SDAT_GPIO21,
+ CX23885_PIN_I2S_WCLK_GPIO22,
+ CX23885_PIN_I2S_BCLK_GPIO23,
+ CX23885_PIN_IRQ_N_GPIO16,
+};
+
+enum cx23885_io_pad {
+ CX23885_PAD_IR_RX,
+ CX23885_PAD_GPIO19,
+ CX23885_PAD_IR_TX,
+ CX23885_PAD_GPIO20,
+ CX23885_PAD_I2S_SDAT,
+ CX23885_PAD_GPIO21,
+ CX23885_PAD_I2S_WCLK,
+ CX23885_PAD_GPIO22,
+ CX23885_PAD_I2S_BCLK,
+ CX23885_PAD_GPIO23,
+ CX23885_PAD_IRQ_N,
+ CX23885_PAD_GPIO16,
+};
+
+/* pvr150_workaround activates a workaround for a hardware bug that is
+ present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
+ certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
+ audio autodetect fails on some channels for these models and the workaround
+ is to select the audio standard explicitly. Many thanks to Hauppauge for
+ providing this information.
+ This platform data only needs to be supplied by the ivtv driver. */
+struct cx25840_platform_data {
+ int pvr150_workaround;
+};
+
#endif
* anything with it. Yet, as the same keycode table can be used with other
* devices, a mask is provided to allow its usage. Drivers should generally
* leave this field in blank
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
+ * @rx_resolution : resolution (in ns) of input sampler
+ * @tx_resolution: resolution (in ns) of output sampler
* @priv: driver-specific data, to be used on the callbacks
* @change_protocol: allow changing the protocol used on hardware decoders
* @open: callback to allow drivers to enable polling/irq when IR input device
* is opened.
* @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
* @s_tx_carrier: set transmit carrier frequency
+ * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
+ * @s_rx_carrier: inform driver about carrier it is expected to handle
* @tx_ir: transmit IR
+ * @s_idle: optional: enable/disable hardware idle mode, upon which,
+ device doesn't interrupt host until it sees IR pulses
+ * @s_learning_mode: enable wide band receiver used for learning
*/
struct ir_dev_props {
enum rc_driver_type driver_type;
unsigned long allowed_protos;
u32 scanmask;
+
+ u32 timeout;
+ u32 min_timeout;
+ u32 max_timeout;
+
+ u32 rx_resolution;
+ u32 tx_resolution;
+
void *priv;
int (*change_protocol)(void *priv, u64 ir_type);
int (*open)(void *priv);
void (*close)(void *priv);
int (*s_tx_mask)(void *priv, u32 mask);
int (*s_tx_carrier)(void *priv, u32 carrier);
+ int (*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
+ int (*s_rx_carrier_range)(void *priv, u32 min, u32 max);
int (*tx_ir)(void *priv, int *txbuf, u32 n);
+ void (*s_idle)(void *priv, int enable);
+ int (*s_learning_mode)(void *priv, int enable);
};
struct ir_input_dev {
char *driver_name; /* Name of the driver module */
struct ir_scancode_table rc_tab; /* scan/key table */
unsigned long devno; /* device number */
- const struct ir_dev_props *props; /* Device properties */
+ struct ir_dev_props *props; /* Device properties */
struct ir_raw_event_ctrl *raw; /* for raw pulse/space events */
struct input_dev *input_dev; /* the input device associated with this device */
+ bool idle;
/* key info - needed by IR keycode handlers */
spinlock_t keylock; /* protects the below members */
/* From ir-keytable.c */
int __ir_input_register(struct input_dev *dev,
const struct ir_scancode_table *ir_codes,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name);
static inline int ir_input_register(struct input_dev *dev,
const char *map_name,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name) {
struct ir_scancode_table *ir_codes;
struct ir_input_dev *ir_dev;
return -EINVAL;
ir_codes = get_rc_map(map_name);
- if (!ir_codes)
- return -EINVAL;
+ if (!ir_codes) {
+ ir_codes = get_rc_map(RC_MAP_EMPTY);
+
+ if (!ir_codes)
+ return -EINVAL;
+ }
rc = __ir_input_register(dev, ir_codes, props, driver_name);
if (rc < 0)
void ir_raw_event_handle(struct input_dev *input_dev);
int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+ struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle);
+
static inline void ir_raw_event_reset(struct input_dev *input_dev)
{
struct ir_raw_event ev = { .pulse = false, .duration = 0 };
#define LIRC_CAN_SET_REC_FILTER 0x08000000
#define LIRC_CAN_MEASURE_CARRIER 0x02000000
+#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000
#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
* if enabled from the next key press on the driver will send
* LIRC_MODE2_FREQUENCY packets
*/
-#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
+#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
/*
* to set a range use
#define LIRC_SETUP_START _IO('i', 0x00000021)
#define LIRC_SETUP_END _IO('i', 0x00000022)
+#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32)
+
#endif
#define RC_MAP_PURPLETV "rc-purpletv"
#define RC_MAP_PV951 "rc-pv951"
#define RC_MAP_RC5_HAUPPAUGE_NEW "rc-rc5-hauppauge-new"
+#define RC_MAP_RC5_STREAMZAP "rc-rc5-streamzap"
#define RC_MAP_RC5_TV "rc-rc5-tv"
#define RC_MAP_RC6_MCE "rc-rc6-mce"
#define RC_MAP_REAL_AUDIO_220_32_KEYS "rc-real-audio-220-32-keys"
--- /dev/null
+/*
+ V4L2 controls support header.
+
+ Copyright (C) 2010 Hans Verkuil <hverkuil@xs4all.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _V4L2_CTRLS_H
+#define _V4L2_CTRLS_H
+
+#include <linux/list.h>
+#include <linux/device.h>
+
+/* forward references */
+struct v4l2_ctrl_handler;
+struct v4l2_ctrl;
+struct video_device;
+struct v4l2_subdev;
+
+/** struct v4l2_ctrl_ops - The control operations that the driver has to provide.
+ * @g_volatile_ctrl: Get a new value for this control. Generally only relevant
+ * for volatile (and usually read-only) controls such as a control
+ * that returns the current signal strength which changes
+ * continuously.
+ * If not set, then the currently cached value will be returned.
+ * @try_ctrl: Test whether the control's value is valid. Only relevant when
+ * the usual min/max/step checks are not sufficient.
+ * @s_ctrl: Actually set the new control value. s_ctrl is compulsory. The
+ * ctrl->handler->lock is held when these ops are called, so no
+ * one else can access controls owned by that handler.
+ */
+struct v4l2_ctrl_ops {
+ int (*g_volatile_ctrl)(struct v4l2_ctrl *ctrl);
+ int (*try_ctrl)(struct v4l2_ctrl *ctrl);
+ int (*s_ctrl)(struct v4l2_ctrl *ctrl);
+};
+
+/** struct v4l2_ctrl - The control structure.
+ * @node: The list node.
+ * @handler: The handler that owns the control.
+ * @cluster: Point to start of cluster array.
+ * @ncontrols: Number of controls in cluster array.
+ * @has_new: Internal flag: set when there is a valid new value.
+ * @done: Internal flag: set for each processed control.
+ * @is_private: If set, then this control is private to its handler and it
+ * will not be added to any other handlers. Drivers can set
+ * this flag.
+ * @is_volatile: If set, then this control is volatile. This means that the
+ * control's current value cannot be cached and needs to be
+ * retrieved through the g_volatile_ctrl op. Drivers can set
+ * this flag.
+ * @ops: The control ops.
+ * @id: The control ID.
+ * @name: The control name.
+ * @type: The control type.
+ * @minimum: The control's minimum value.
+ * @maximum: The control's maximum value.
+ * @default_value: The control's default value.
+ * @step: The control's step value for non-menu controls.
+ * @menu_skip_mask: The control's skip mask for menu controls. This makes it
+ * easy to skip menu items that are not valid. If bit X is set,
+ * then menu item X is skipped. Of course, this only works for
+ * menus with <= 32 menu items. There are no menus that come
+ * close to that number, so this is OK. Should we ever need more,
+ * then this will have to be extended to a u64 or a bit array.
+ * @qmenu: A const char * array for all menu items. Array entries that are
+ * empty strings ("") correspond to non-existing menu items (this
+ * is in addition to the menu_skip_mask above). The last entry
+ * must be NULL.
+ * @flags: The control's flags.
+ * @cur: The control's current value.
+ * @val: The control's new s32 value.
+ * @val64: The control's new s64 value.
+ * @string: The control's new string value.
+ * @priv: The control's private pointer. For use by the driver. It is
+ * untouched by the control framework. Note that this pointer is
+ * not freed when the control is deleted. Should this be needed
+ * then a new internal bitfield can be added to tell the framework
+ * to free this pointer.
+ */
+struct v4l2_ctrl {
+ /* Administrative fields */
+ struct list_head node;
+ struct v4l2_ctrl_handler *handler;
+ struct v4l2_ctrl **cluster;
+ unsigned ncontrols;
+ unsigned int has_new:1;
+ unsigned int done:1;
+
+ unsigned int is_private:1;
+ unsigned int is_volatile:1;
+
+ const struct v4l2_ctrl_ops *ops;
+ u32 id;
+ const char *name;
+ enum v4l2_ctrl_type type;
+ s32 minimum, maximum, default_value;
+ union {
+ u32 step;
+ u32 menu_skip_mask;
+ };
+ const char **qmenu;
+ unsigned long flags;
+ union {
+ s32 val;
+ s64 val64;
+ char *string;
+ } cur;
+ union {
+ s32 val;
+ s64 val64;
+ char *string;
+ };
+ void *priv;
+};
+
+/** struct v4l2_ctrl_ref - The control reference.
+ * @node: List node for the sorted list.
+ * @next: Single-link list node for the hash.
+ * @ctrl: The actual control information.
+ *
+ * Each control handler has a list of these refs. The list_head is used to
+ * keep a sorted-by-control-ID list of all controls, while the next pointer
+ * is used to link the control in the hash's bucket.
+ */
+struct v4l2_ctrl_ref {
+ struct list_head node;
+ struct v4l2_ctrl_ref *next;
+ struct v4l2_ctrl *ctrl;
+};
+
+/** struct v4l2_ctrl_handler - The control handler keeps track of all the
+ * controls: both the controls owned by the handler and those inherited
+ * from other handlers.
+ * @lock: Lock to control access to this handler and its controls.
+ * @ctrls: The list of controls owned by this handler.
+ * @ctrl_refs: The list of control references.
+ * @cached: The last found control reference. It is common that the same
+ * control is needed multiple times, so this is a simple
+ * optimization.
+ * @buckets: Buckets for the hashing. Allows for quick control lookup.
+ * @nr_of_buckets: Total number of buckets in the array.
+ * @error: The error code of the first failed control addition.
+ */
+struct v4l2_ctrl_handler {
+ struct mutex lock;
+ struct list_head ctrls;
+ struct list_head ctrl_refs;
+ struct v4l2_ctrl_ref *cached;
+ struct v4l2_ctrl_ref **buckets;
+ u16 nr_of_buckets;
+ int error;
+};
+
+/** struct v4l2_ctrl_config - Control configuration structure.
+ * @ops: The control ops.
+ * @id: The control ID.
+ * @name: The control name.
+ * @type: The control type.
+ * @min: The control's minimum value.
+ * @max: The control's maximum value.
+ * @step: The control's step value for non-menu controls.
+ * @def: The control's default value.
+ * @flags: The control's flags.
+ * @menu_skip_mask: The control's skip mask for menu controls. This makes it
+ * easy to skip menu items that are not valid. If bit X is set,
+ * then menu item X is skipped. Of course, this only works for
+ * menus with <= 32 menu items. There are no menus that come
+ * close to that number, so this is OK. Should we ever need more,
+ * then this will have to be extended to a u64 or a bit array.
+ * @qmenu: A const char * array for all menu items. Array entries that are
+ * empty strings ("") correspond to non-existing menu items (this
+ * is in addition to the menu_skip_mask above). The last entry
+ * must be NULL.
+ * @is_private: If set, then this control is private to its handler and it
+ * will not be added to any other handlers.
+ * @is_volatile: If set, then this control is volatile. This means that the
+ * control's current value cannot be cached and needs to be
+ * retrieved through the g_volatile_ctrl op.
+ */
+struct v4l2_ctrl_config {
+ const struct v4l2_ctrl_ops *ops;
+ u32 id;
+ const char *name;
+ enum v4l2_ctrl_type type;
+ s32 min;
+ s32 max;
+ u32 step;
+ s32 def;
+ u32 flags;
+ u32 menu_skip_mask;
+ const char **qmenu;
+ unsigned int is_private:1;
+ unsigned int is_volatile:1;
+};
+
+/** v4l2_ctrl_fill() - Fill in the control fields based on the control ID.
+ *
+ * This works for all standard V4L2 controls.
+ * For non-standard controls it will only fill in the given arguments
+ * and @name will be NULL.
+ *
+ * This function will overwrite the contents of @name, @type and @flags.
+ * The contents of @min, @max, @step and @def may be modified depending on
+ * the type.
+ *
+ * Do not use in drivers! It is used internally for backwards compatibility
+ * control handling only. Once all drivers are converted to use the new
+ * control framework this function will no longer be exported.
+ */
+void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
+ s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags);
+
+
+/** v4l2_ctrl_handler_init() - Initialize the control handler.
+ * @hdl: The control handler.
+ * @nr_of_controls_hint: A hint of how many controls this handler is
+ * expected to refer to. This is the total number, so including
+ * any inherited controls. It doesn't have to be precise, but if
+ * it is way off, then you either waste memory (too many buckets
+ * are allocated) or the control lookup becomes slower (not enough
+ * buckets are allocated, so there are more slow list lookups).
+ * It will always work, though.
+ *
+ * Returns an error if the buckets could not be allocated. This error will
+ * also be stored in @hdl->error.
+ */
+int v4l2_ctrl_handler_init(struct v4l2_ctrl_handler *hdl,
+ unsigned nr_of_controls_hint);
+
+/** v4l2_ctrl_handler_free() - Free all controls owned by the handler and free
+ * the control list.
+ * @hdl: The control handler.
+ *
+ * Does nothing if @hdl == NULL.
+ */
+void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl);
+
+/** v4l2_ctrl_handler_setup() - Call the s_ctrl op for all controls belonging
+ * to the handler to initialize the hardware to the current control values.
+ * @hdl: The control handler.
+ *
+ * Button controls will be skipped, as are read-only controls.
+ *
+ * If @hdl == NULL, then this just returns 0.
+ */
+int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl);
+
+/** v4l2_ctrl_handler_log_status() - Log all controls owned by the handler.
+ * @hdl: The control handler.
+ * @prefix: The prefix to use when logging the control values. If the
+ * prefix does not end with a space, then ": " will be added
+ * after the prefix. If @prefix == NULL, then no prefix will be
+ * used.
+ *
+ * For use with VIDIOC_LOG_STATUS.
+ *
+ * Does nothing if @hdl == NULL.
+ */
+void v4l2_ctrl_handler_log_status(struct v4l2_ctrl_handler *hdl,
+ const char *prefix);
+
+/** v4l2_ctrl_new_custom() - Allocate and initialize a new custom V4L2
+ * control.
+ * @hdl: The control handler.
+ * @cfg: The control's configuration data.
+ * @priv: The control's driver-specific private data.
+ *
+ * If the &v4l2_ctrl struct could not be allocated then NULL is returned
+ * and @hdl->error is set to the error code (if it wasn't set already).
+ */
+struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_config *cfg, void *priv);
+
+/** v4l2_ctrl_new_std() - Allocate and initialize a new standard V4L2 non-menu control.
+ * @hdl: The control handler.
+ * @ops: The control ops.
+ * @id: The control ID.
+ * @min: The control's minimum value.
+ * @max: The control's maximum value.
+ * @step: The control's step value
+ * @def: The control's default value.
+ *
+ * If the &v4l2_ctrl struct could not be allocated, or the control
+ * ID is not known, then NULL is returned and @hdl->error is set to the
+ * appropriate error code (if it wasn't set already).
+ *
+ * If @id refers to a menu control, then this function will return NULL.
+ *
+ * Use v4l2_ctrl_new_std_menu() when adding menu controls.
+ */
+struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 min, s32 max, u32 step, s32 def);
+
+/** v4l2_ctrl_new_std_menu() - Allocate and initialize a new standard V4L2 menu control.
+ * @hdl: The control handler.
+ * @ops: The control ops.
+ * @id: The control ID.
+ * @max: The control's maximum value.
+ * @mask: The control's skip mask for menu controls. This makes it
+ * easy to skip menu items that are not valid. If bit X is set,
+ * then menu item X is skipped. Of course, this only works for
+ * menus with <= 32 menu items. There are no menus that come
+ * close to that number, so this is OK. Should we ever need more,
+ * then this will have to be extended to a u64 or a bit array.
+ * @def: The control's default value.
+ *
+ * Same as v4l2_ctrl_new_std(), but @min is set to 0 and the @mask value
+ * determines which menu items are to be skipped.
+ *
+ * If @id refers to a non-menu control, then this function will return NULL.
+ */
+struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 max, s32 mask, s32 def);
+
+/** v4l2_ctrl_add_ctrl() - Add a control from another handler to this handler.
+ * @hdl: The control handler.
+ * @ctrl: The control to add.
+ *
+ * It will return NULL if it was unable to add the control reference.
+ * If the control already belonged to the handler, then it will do
+ * nothing and just return @ctrl.
+ */
+struct v4l2_ctrl *v4l2_ctrl_add_ctrl(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ctrl *ctrl);
+
+/** v4l2_ctrl_add_handler() - Add all controls from handler @add to
+ * handler @hdl.
+ * @hdl: The control handler.
+ * @add: The control handler whose controls you want to add to
+ * the @hdl control handler.
+ *
+ * Does nothing if either of the two is a NULL pointer.
+ * In case of an error @hdl->error will be set to the error code (if it
+ * wasn't set already).
+ */
+int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ctrl_handler *add);
+
+
+/** v4l2_ctrl_cluster() - Mark all controls in the cluster as belonging to that cluster.
+ * @ncontrols: The number of controls in this cluster.
+ * @controls: The cluster control array of size @ncontrols.
+ */
+void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls);
+
+
+/** v4l2_ctrl_find() - Find a control with the given ID.
+ * @hdl: The control handler.
+ * @id: The control ID to find.
+ *
+ * If @hdl == NULL this will return NULL as well. Will lock the handler so
+ * do not use from inside &v4l2_ctrl_ops.
+ */
+struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id);
+
+/** v4l2_ctrl_activate() - Make the control active or inactive.
+ * @ctrl: The control to (de)activate.
+ * @active: True if the control should become active.
+ *
+ * This sets or clears the V4L2_CTRL_FLAG_INACTIVE flag atomically.
+ * Does nothing if @ctrl == NULL.
+ * This will usually be called from within the s_ctrl op.
+ *
+ * This function can be called regardless of whether the control handler
+ * is locked or not.
+ */
+void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active);
+
+/** v4l2_ctrl_grab() - Mark the control as grabbed or not grabbed.
+ * @ctrl: The control to (de)activate.
+ * @grabbed: True if the control should become grabbed.
+ *
+ * This sets or clears the V4L2_CTRL_FLAG_GRABBED flag atomically.
+ * Does nothing if @ctrl == NULL.
+ * This will usually be called when starting or stopping streaming in the
+ * driver.
+ *
+ * This function can be called regardless of whether the control handler
+ * is locked or not.
+ */
+void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed);
+
+/** v4l2_ctrl_lock() - Helper function to lock the handler
+ * associated with the control.
+ * @ctrl: The control to lock.
+ */
+static inline void v4l2_ctrl_lock(struct v4l2_ctrl *ctrl)
+{
+ mutex_lock(&ctrl->handler->lock);
+}
+
+/** v4l2_ctrl_lock() - Helper function to unlock the handler
+ * associated with the control.
+ * @ctrl: The control to unlock.
+ */
+static inline void v4l2_ctrl_unlock(struct v4l2_ctrl *ctrl)
+{
+ mutex_unlock(&ctrl->handler->lock);
+}
+
+/** v4l2_ctrl_g_ctrl() - Helper function to get the control's value from within a driver.
+ * @ctrl: The control.
+ *
+ * This returns the control's value safely by going through the control
+ * framework. This function will lock the control's handler, so it cannot be
+ * used from within the &v4l2_ctrl_ops functions.
+ *
+ * This function is for integer type controls only.
+ */
+s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
+
+/** v4l2_ctrl_s_ctrl() - Helper function to set the control's value from within a driver.
+ * @ctrl: The control.
+ * @val: The new value.
+ *
+ * This set the control's new value safely by going through the control
+ * framework. This function will lock the control's handler, so it cannot be
+ * used from within the &v4l2_ctrl_ops functions.
+ *
+ * This function is for integer type controls only.
+ */
+int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
+
+
+/* Helpers for ioctl_ops. If hdl == NULL then they will all return -EINVAL. */
+int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc);
+int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm);
+int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl);
+int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl);
+int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+
+/* Helpers for subdevices. If the associated ctrl_handler == NULL then they
+ will all return -EINVAL. */
+int v4l2_subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
+int v4l2_subdev_querymenu(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
+int v4l2_subdev_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+
+#endif
struct v4l2_ioctl_callbacks;
struct video_device;
struct v4l2_device;
+struct v4l2_ctrl_handler;
/* Flag to mark the video_device struct as registered.
Drivers can clear this flag if they want to block all future
struct device *parent; /* device parent */
struct v4l2_device *v4l2_dev; /* v4l2_device parent */
+ /* Control handler associated with this device node. May be NULL. */
+ struct v4l2_ctrl_handler *ctrl_handler;
+
/* device info */
char name[32];
int vfl_type;
#define V4L2_DEVICE_NAME_SIZE (20 + 16)
+struct v4l2_ctrl_handler;
+
struct v4l2_device {
/* dev->driver_data points to this struct.
Note: dev might be NULL if there is no parent device
/* notify callback called by some sub-devices. */
void (*notify)(struct v4l2_subdev *sd,
unsigned int notification, void *arg);
+ /* The control handler. May be NULL. */
+ struct v4l2_ctrl_handler *ctrl_handler;
};
/* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev.
#define V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ 0x00000001
struct v4l2_device;
+struct v4l2_ctrl_handler;
struct v4l2_subdev;
struct tuner_setup;
not yet implemented) since ops provide proper type-checking.
*/
+/* Subdevice external IO pin configuration */
+#define V4L2_SUBDEV_IO_PIN_DISABLE (1 << 0) /* ENABLE assumed */
+#define V4L2_SUBDEV_IO_PIN_OUTPUT (1 << 1)
+#define V4L2_SUBDEV_IO_PIN_INPUT (1 << 2)
+#define V4L2_SUBDEV_IO_PIN_SET_VALUE (1 << 3) /* Set output value */
+#define V4L2_SUBDEV_IO_PIN_ACTIVE_LOW (1 << 4) /* ACTIVE HIGH assumed */
+
+struct v4l2_subdev_io_pin_config {
+ u32 flags; /* V4L2_SUBDEV_IO_PIN_* flags for this pin's config */
+ u8 pin; /* Chip external IO pin to configure */
+ u8 function; /* Internal signal pad/function to route to IO pin */
+ u8 value; /* Initial value for pin - e.g. GPIO output value */
+ u8 strength; /* Pin drive strength */
+};
+
/* s_config: if set, then it is always called by the v4l2_i2c_new_subdev*
functions after the v4l2_subdev was registered. It is used to pass
platform data to the subdev which can be used during initialization.
+ s_io_pin_config: configure one or more chip I/O pins for chips that
+ multiplex different internal signal pads out to IO pins. This function
+ takes a pointer to an array of 'n' pin configuration entries, one for
+ each pin being configured. This function could be called at times
+ other than just subdevice initialization.
+
init: initialize the sensor registors to some sort of reasonable default
values. Do not use for new drivers and should be removed in existing
drivers.
s_power: puts subdevice in power saving mode (on == 0) or normal operation
mode (on == 1).
+
+ interrupt_service_routine: Called by the bridge chip's interrupt service
+ handler, when an interrupt status has be raised due to this subdev,
+ so that this subdev can handle the details. It may schedule work to be
+ performed later. It must not sleep. *Called from an IRQ context*.
*/
struct v4l2_subdev_core_ops {
int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
int (*log_status)(struct v4l2_subdev *sd);
int (*s_config)(struct v4l2_subdev *sd, int irq, void *platform_data);
+ int (*s_io_pin_config)(struct v4l2_subdev *sd, size_t n,
+ struct v4l2_subdev_io_pin_config *pincfg);
int (*init)(struct v4l2_subdev *sd, u32 val);
int (*load_fw)(struct v4l2_subdev *sd);
int (*reset)(struct v4l2_subdev *sd, u32 val);
int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
#endif
int (*s_power)(struct v4l2_subdev *sd, int on);
+ int (*interrupt_service_routine)(struct v4l2_subdev *sd,
+ u32 status, bool *handled);
};
/* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio.
};
/*
- interrupt_service_routine: Called by the bridge chip's interrupt service
- handler, when an IR interrupt status has be raised due to this subdev,
- so that this subdev can handle the details. It may schedule work to be
- performed later. It must not sleep. *Called from an IRQ context*.
-
[rt]x_g_parameters: Get the current operating parameters and state of the
the IR receiver or transmitter.
*/
enum v4l2_subdev_ir_mode {
- V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* space & mark widths in nanosecs */
+ V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* uses struct ir_raw_event records */
};
-/* Data format of data read or written for V4L2_SUBDEV_IR_MODE_PULSE_WIDTH */
-#define V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS 0x7fffffff
-#define V4L2_SUBDEV_IR_PULSE_LEVEL_MASK 0x80000000
-#define V4L2_SUBDEV_IR_PULSE_RX_SEQ_END 0xffffffff
-
struct v4l2_subdev_ir_parameters {
/* Either Rx or Tx */
unsigned int bytes_per_data_element; /* of data in read or write call */
u32 max_pulse_width; /* ns, valid only for baseband signal */
unsigned int carrier_freq; /* Hz, valid only for modulated signal*/
unsigned int duty_cycle; /* percent, valid only for modulated signal*/
- bool invert; /* logically invert sense of mark/space */
+ bool invert_level; /* invert signal level */
+
+ /* Tx only */
+ bool invert_carrier_sense; /* Send 0/space as a carrier burst */
/* Rx only */
u32 noise_filter_min_width; /* ns, min time of a valid pulse */
};
struct v4l2_subdev_ir_ops {
- /* Common to receiver and transmitter */
- int (*interrupt_service_routine)(struct v4l2_subdev *sd,
- u32 status, bool *handled);
-
/* Receiver */
int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count,
ssize_t *num);
u32 flags;
struct v4l2_device *v4l2_dev;
const struct v4l2_subdev_ops *ops;
+ /* The control handler of this subdev. May be NULL. */
+ struct v4l2_ctrl_handler *ctrl_handler;
/* name must be unique */
char name[V4L2_SUBDEV_NAME_SIZE];
/* can be used to group similar subdevs, value is driver-specific */
/*
- * Portions of MTD ABI definition which are shared by kernel and user space
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __MTD_ABI_H__
#define MEMERASE64 _IOW('M', 20, struct erase_info_user64)
#define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64)
#define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64)
+#define MEMISLOCKED _IOR('M', 23, struct erase_info_user)
/*
* Obsolete legacy interface. Keep it in order not to break userspace
/*
- * MTD ABI header for use by user space only.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __MTD_USER_H__
/*
- * Parts of NFTL headers shared with userspace
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
/*
- * Copyright (c) International Business Machines Corp., 2006
+ * Copyright © International Business Machines Corp., 2006
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define L2CAP_DEFAULT_FLUSH_TO 0xffff
#define L2CAP_DEFAULT_TX_WINDOW 63
#define L2CAP_DEFAULT_MAX_TX 3
-#define L2CAP_DEFAULT_RETRANS_TO 1000 /* 1 second */
+#define L2CAP_DEFAULT_RETRANS_TO 2000 /* 2 seconds */
#define L2CAP_DEFAULT_MONITOR_TO 12000 /* 12 seconds */
-#define L2CAP_DEFAULT_MAX_PDU_SIZE 672
+#define L2CAP_DEFAULT_MAX_PDU_SIZE 1009 /* Sized for 3-DH5 packet */
#define L2CAP_DEFAULT_ACK_TO 200
#define L2CAP_LOCAL_BUSY_TRIES 12
* @sk_priority: %SO_PRIORITY setting
* @sk_type: socket type (%SOCK_STREAM, etc)
* @sk_protocol: which protocol this socket belongs in this network family
- * @sk_peercred: %SO_PEERCRED setting
+ * @sk_peer_pid: &struct pid for this socket's peer
+ * @sk_peer_cred: %SO_PEERCRED setting
* @sk_rcvlowat: %SO_RCVLOWAT setting
* @sk_rcvtimeo: %SO_RCVTIMEO setting
* @sk_sndtimeo: %SO_SNDTIMEO setting
* @sk_send_head: front of stuff to transmit
* @sk_security: used by security modules
* @sk_mark: generic packet mark
+ * @sk_classid: this socket's cgroup classid
* @sk_write_pending: a write to stream socket waits to start
* @sk_state_change: callback to indicate change in the state of the sock
* @sk_data_ready: callback to indicate there is data to be processed
/* defined in T10 SCSI Primary Commands-2 (SPC2) */
struct scsi_varlen_cdb_hdr {
- u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
- u8 control;
- u8 misc[5];
- u8 additional_cdb_length; /* total cdb length - 8 */
+ __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
+ __u8 control;
+ __u8 misc[5];
+ __u8 additional_cdb_length; /* total cdb length - 8 */
__be16 service_action;
/* service specific data follows */
};
* PCI : ID data is the 16 bit PCI Registered Vendor ID
*/
#define SCSI_NL_VID_TYPE_SHIFT 56
-#define SCSI_NL_VID_TYPE_MASK ((u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
-#define SCSI_NL_VID_TYPE_PCI ((u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_TYPE_MASK ((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_TYPE_PCI ((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
#define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK)
+header-y += asequencer.h
+header-y += asound.h
header-y += asound_fm.h
+header-y += emu10k1.h
header-y += hdsp.h
header-y += hdspm.h
+header-y += sb16_csp.h
header-y += sfnt_info.h
-
-unifdef-y += asequencer.h
-unifdef-y += asound.h
-unifdef-y += emu10k1.h
-unifdef-y += sb16_csp.h
unsigned int card_type; /* EMU10K1_CARD_* */
unsigned int ecard_ctrl; /* ecard control bits */
unsigned long dma_mask; /* PCI DMA mask */
+ unsigned int delay_pcm_irq; /* in samples */
int max_cache_pages; /* max memory size / PAGE_SIZE */
struct snd_dma_buffer silent_page; /* silent page */
struct snd_dma_buffer ptb_pages; /* page table pages */
TP_fast_assign(
__entry->dev = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
- __entry->sector = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
- __entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
+ __entry->sector = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ 0 : blk_rq_pos(rq);
+ __entry->nr_sector = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ 0 : blk_rq_sectors(rq);
__entry->errors = rq->errors;
blk_fill_rwbs_rq(__entry->rwbs, rq);
TP_fast_assign(
__entry->dev = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
- __entry->sector = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
- __entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
- __entry->bytes = blk_pc_request(rq) ? blk_rq_bytes(rq) : 0;
+ __entry->sector = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ 0 : blk_rq_pos(rq);
+ __entry->nr_sector = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ 0 : blk_rq_sectors(rq);
+ __entry->bytes = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ blk_rq_bytes(rq) : 0;
blk_fill_rwbs_rq(__entry->rwbs, rq);
blk_dump_cmd(__get_str(cmd), rq);
--- /dev/null
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM writeback
+
+#if !defined(_TRACE_WRITEBACK_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_WRITEBACK_H
+
+#include <linux/backing-dev.h>
+#include <linux/device.h>
+#include <linux/writeback.h>
+
+struct wb_writeback_work;
+
+DECLARE_EVENT_CLASS(writeback_work_class,
+ TP_PROTO(struct backing_dev_info *bdi, struct wb_writeback_work *work),
+ TP_ARGS(bdi, work),
+ TP_STRUCT__entry(
+ __array(char, name, 32)
+ __field(long, nr_pages)
+ __field(dev_t, sb_dev)
+ __field(int, sync_mode)
+ __field(int, for_kupdate)
+ __field(int, range_cyclic)
+ __field(int, for_background)
+ ),
+ TP_fast_assign(
+ strncpy(__entry->name, dev_name(bdi->dev), 32);
+ __entry->nr_pages = work->nr_pages;
+ __entry->sb_dev = work->sb ? work->sb->s_dev : 0;
+ __entry->sync_mode = work->sync_mode;
+ __entry->for_kupdate = work->for_kupdate;
+ __entry->range_cyclic = work->range_cyclic;
+ __entry->for_background = work->for_background;
+ ),
+ TP_printk("bdi %s: sb_dev %d:%d nr_pages=%ld sync_mode=%d "
+ "kupdate=%d range_cyclic=%d background=%d",
+ __entry->name,
+ MAJOR(__entry->sb_dev), MINOR(__entry->sb_dev),
+ __entry->nr_pages,
+ __entry->sync_mode,
+ __entry->for_kupdate,
+ __entry->range_cyclic,
+ __entry->for_background
+ )
+);
+#define DEFINE_WRITEBACK_WORK_EVENT(name) \
+DEFINE_EVENT(writeback_work_class, name, \
+ TP_PROTO(struct backing_dev_info *bdi, struct wb_writeback_work *work), \
+ TP_ARGS(bdi, work))
+DEFINE_WRITEBACK_WORK_EVENT(writeback_nothread);
+DEFINE_WRITEBACK_WORK_EVENT(writeback_queue);
+DEFINE_WRITEBACK_WORK_EVENT(writeback_exec);
+
+TRACE_EVENT(writeback_pages_written,
+ TP_PROTO(long pages_written),
+ TP_ARGS(pages_written),
+ TP_STRUCT__entry(
+ __field(long, pages)
+ ),
+ TP_fast_assign(
+ __entry->pages = pages_written;
+ ),
+ TP_printk("%ld", __entry->pages)
+);
+
+DECLARE_EVENT_CLASS(writeback_class,
+ TP_PROTO(struct backing_dev_info *bdi),
+ TP_ARGS(bdi),
+ TP_STRUCT__entry(
+ __array(char, name, 32)
+ ),
+ TP_fast_assign(
+ strncpy(__entry->name, dev_name(bdi->dev), 32);
+ ),
+ TP_printk("bdi %s",
+ __entry->name
+ )
+);
+#define DEFINE_WRITEBACK_EVENT(name) \
+DEFINE_EVENT(writeback_class, name, \
+ TP_PROTO(struct backing_dev_info *bdi), \
+ TP_ARGS(bdi))
+
+DEFINE_WRITEBACK_EVENT(writeback_nowork);
+DEFINE_WRITEBACK_EVENT(writeback_wake_thread);
+DEFINE_WRITEBACK_EVENT(writeback_wake_forker_thread);
+DEFINE_WRITEBACK_EVENT(writeback_bdi_register);
+DEFINE_WRITEBACK_EVENT(writeback_bdi_unregister);
+DEFINE_WRITEBACK_EVENT(writeback_thread_start);
+DEFINE_WRITEBACK_EVENT(writeback_thread_stop);
+
+DECLARE_EVENT_CLASS(wbc_class,
+ TP_PROTO(struct writeback_control *wbc, struct backing_dev_info *bdi),
+ TP_ARGS(wbc, bdi),
+ TP_STRUCT__entry(
+ __array(char, name, 32)
+ __field(long, nr_to_write)
+ __field(long, pages_skipped)
+ __field(int, sync_mode)
+ __field(int, nonblocking)
+ __field(int, encountered_congestion)
+ __field(int, for_kupdate)
+ __field(int, for_background)
+ __field(int, for_reclaim)
+ __field(int, range_cyclic)
+ __field(int, more_io)
+ __field(unsigned long, older_than_this)
+ __field(long, range_start)
+ __field(long, range_end)
+ ),
+
+ TP_fast_assign(
+ strncpy(__entry->name, dev_name(bdi->dev), 32);
+ __entry->nr_to_write = wbc->nr_to_write;
+ __entry->pages_skipped = wbc->pages_skipped;
+ __entry->sync_mode = wbc->sync_mode;
+ __entry->for_kupdate = wbc->for_kupdate;
+ __entry->for_background = wbc->for_background;
+ __entry->for_reclaim = wbc->for_reclaim;
+ __entry->range_cyclic = wbc->range_cyclic;
+ __entry->more_io = wbc->more_io;
+ __entry->older_than_this = wbc->older_than_this ?
+ *wbc->older_than_this : 0;
+ __entry->range_start = (long)wbc->range_start;
+ __entry->range_end = (long)wbc->range_end;
+ ),
+
+ TP_printk("bdi %s: towrt=%ld skip=%ld mode=%d kupd=%d "
+ "bgrd=%d reclm=%d cyclic=%d more=%d older=0x%lx "
+ "start=0x%lx end=0x%lx",
+ __entry->name,
+ __entry->nr_to_write,
+ __entry->pages_skipped,
+ __entry->sync_mode,
+ __entry->for_kupdate,
+ __entry->for_background,
+ __entry->for_reclaim,
+ __entry->range_cyclic,
+ __entry->more_io,
+ __entry->older_than_this,
+ __entry->range_start,
+ __entry->range_end)
+)
+
+#define DEFINE_WBC_EVENT(name) \
+DEFINE_EVENT(wbc_class, name, \
+ TP_PROTO(struct writeback_control *wbc, struct backing_dev_info *bdi), \
+ TP_ARGS(wbc, bdi))
+DEFINE_WBC_EVENT(wbc_writeback_start);
+DEFINE_WBC_EVENT(wbc_writeback_written);
+DEFINE_WBC_EVENT(wbc_writeback_wait);
+DEFINE_WBC_EVENT(wbc_balance_dirty_start);
+DEFINE_WBC_EVENT(wbc_balance_dirty_written);
+DEFINE_WBC_EVENT(wbc_balance_dirty_wait);
+DEFINE_WBC_EVENT(wbc_writepage);
+
+#endif /* _TRACE_WRITEBACK_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
-unifdef-y += sisfb.h uvesafb.h
-unifdef-y += edid.h
+header-y += edid.h
+header-y += sisfb.h
+header-y += uvesafb.h
--- /dev/null
+/*
+ * Defines for Mobile Industry Processor Interface (MIPI(R))
+ * Display Working Group standards: DSI, DCS, DBI, DPI
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef MIPI_DISPLAY_H
+#define MIPI_DISPLAY_H
+
+/* MIPI DSI Processor-to-Peripheral transaction types */
+enum {
+ MIPI_DSI_V_SYNC_START = 0x01,
+ MIPI_DSI_V_SYNC_END = 0x11,
+ MIPI_DSI_H_SYNC_START = 0x21,
+ MIPI_DSI_H_SYNC_END = 0x31,
+
+ MIPI_DSI_COLOR_MODE_OFF = 0x02,
+ MIPI_DSI_COLOR_MODE_ON = 0x12,
+ MIPI_DSI_SHUTDOWN_PERIPHERAL = 0x22,
+ MIPI_DSI_TURN_ON_PERIPHERAL = 0x32,
+
+ MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM = 0x03,
+ MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM = 0x13,
+ MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM = 0x23,
+
+ MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM = 0x04,
+ MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM = 0x14,
+ MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM = 0x24,
+
+ MIPI_DSI_DCS_SHORT_WRITE = 0x05,
+ MIPI_DSI_DCS_SHORT_WRITE_PARAM = 0x15,
+
+ MIPI_DSI_DCS_READ = 0x06,
+
+ MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE = 0x37,
+
+ MIPI_DSI_END_OF_TRANSMISSION = 0x08,
+
+ MIPI_DSI_NULL_PACKET = 0x09,
+ MIPI_DSI_BLANKING_PACKET = 0x19,
+ MIPI_DSI_GENERIC_LONG_WRITE = 0x29,
+ MIPI_DSI_DCS_LONG_WRITE = 0x39,
+
+ MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20 = 0x0c,
+ MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24 = 0x1c,
+ MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16 = 0x2c,
+
+ MIPI_DSI_PACKED_PIXEL_STREAM_30 = 0x0d,
+ MIPI_DSI_PACKED_PIXEL_STREAM_36 = 0x1d,
+ MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12 = 0x3d,
+
+ MIPI_DSI_PACKED_PIXEL_STREAM_16 = 0x0e,
+ MIPI_DSI_PACKED_PIXEL_STREAM_18 = 0x1e,
+ MIPI_DSI_PIXEL_STREAM_3BYTE_18 = 0x2e,
+ MIPI_DSI_PACKED_PIXEL_STREAM_24 = 0x3e,
+};
+
+/* MIPI DSI Peripheral-to-Processor transaction types */
+enum {
+ MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT = 0x02,
+ MIPI_DSI_RX_END_OF_TRANSMISSION = 0x08,
+ MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE = 0x11,
+ MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE = 0x12,
+ MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE = 0x1a,
+ MIPI_DSI_RX_DCS_LONG_READ_RESPONSE = 0x1c,
+ MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE = 0x21,
+ MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE = 0x22,
+};
+
+/* MIPI DCS commands */
+enum {
+ MIPI_DCS_NOP = 0x00,
+ MIPI_DCS_SOFT_RESET = 0x01,
+ MIPI_DCS_GET_DISPLAY_ID = 0x04,
+ MIPI_DCS_GET_RED_CHANNEL = 0x06,
+ MIPI_DCS_GET_GREEN_CHANNEL = 0x07,
+ MIPI_DCS_GET_BLUE_CHANNEL = 0x08,
+ MIPI_DCS_GET_DISPLAY_STATUS = 0x09,
+ MIPI_DCS_GET_POWER_MODE = 0x0A,
+ MIPI_DCS_GET_ADDRESS_MODE = 0x0B,
+ MIPI_DCS_GET_PIXEL_FORMAT = 0x0C,
+ MIPI_DCS_GET_DISPLAY_MODE = 0x0D,
+ MIPI_DCS_GET_SIGNAL_MODE = 0x0E,
+ MIPI_DCS_GET_DIAGNOSTIC_RESULT = 0x0F,
+ MIPI_DCS_ENTER_SLEEP_MODE = 0x10,
+ MIPI_DCS_EXIT_SLEEP_MODE = 0x11,
+ MIPI_DCS_ENTER_PARTIAL_MODE = 0x12,
+ MIPI_DCS_ENTER_NORMAL_MODE = 0x13,
+ MIPI_DCS_EXIT_INVERT_MODE = 0x20,
+ MIPI_DCS_ENTER_INVERT_MODE = 0x21,
+ MIPI_DCS_SET_GAMMA_CURVE = 0x26,
+ MIPI_DCS_SET_DISPLAY_OFF = 0x28,
+ MIPI_DCS_SET_DISPLAY_ON = 0x29,
+ MIPI_DCS_SET_COLUMN_ADDRESS = 0x2A,
+ MIPI_DCS_SET_PAGE_ADDRESS = 0x2B,
+ MIPI_DCS_WRITE_MEMORY_START = 0x2C,
+ MIPI_DCS_WRITE_LUT = 0x2D,
+ MIPI_DCS_READ_MEMORY_START = 0x2E,
+ MIPI_DCS_SET_PARTIAL_AREA = 0x30,
+ MIPI_DCS_SET_SCROLL_AREA = 0x33,
+ MIPI_DCS_SET_TEAR_OFF = 0x34,
+ MIPI_DCS_SET_TEAR_ON = 0x35,
+ MIPI_DCS_SET_ADDRESS_MODE = 0x36,
+ MIPI_DCS_SET_SCROLL_START = 0x37,
+ MIPI_DCS_EXIT_IDLE_MODE = 0x38,
+ MIPI_DCS_ENTER_IDLE_MODE = 0x39,
+ MIPI_DCS_SET_PIXEL_FORMAT = 0x3A,
+ MIPI_DCS_WRITE_MEMORY_CONTINUE = 0x3C,
+ MIPI_DCS_READ_MEMORY_CONTINUE = 0x3E,
+ MIPI_DCS_SET_TEAR_SCANLINE = 0x44,
+ MIPI_DCS_GET_SCANLINE = 0x45,
+ MIPI_DCS_READ_DDB_START = 0xA1,
+ MIPI_DCS_READ_DDB_CONTINUE = 0xA8,
+};
+
+/* MIPI DCS pixel formats */
+#define MIPI_DCS_PIXEL_FMT_24BIT 7
+#define MIPI_DCS_PIXEL_FMT_18BIT 6
+#define MIPI_DCS_PIXEL_FMT_16BIT 5
+#define MIPI_DCS_PIXEL_FMT_12BIT 3
+#define MIPI_DCS_PIXEL_FMT_8BIT 2
+#define MIPI_DCS_PIXEL_FMT_3BIT 1
+
+#endif
--- /dev/null
+/*
+ * Public SH-mobile MIPI DSI header
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef VIDEO_SH_MIPI_DSI_H
+#define VIDEO_SH_MIPI_DSI_H
+
+enum sh_mipi_dsi_data_fmt {
+ MIPI_RGB888,
+ MIPI_RGB565,
+ MIPI_RGB666_LP,
+ MIPI_RGB666,
+ MIPI_BGR888,
+ MIPI_BGR565,
+ MIPI_BGR666_LP,
+ MIPI_BGR666,
+ MIPI_YUYV,
+ MIPI_UYVY,
+ MIPI_YUV420_L,
+ MIPI_YUV420,
+};
+
+struct sh_mobile_lcdc_chan_cfg;
+
+struct sh_mipi_dsi_info {
+ enum sh_mipi_dsi_data_fmt data_format;
+ struct sh_mobile_lcdc_chan_cfg *lcd_chan;
+};
+
+#endif
--- /dev/null
+/*
+ * SH-Mobile High-Definition Multimedia Interface (HDMI)
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SH_MOBILE_HDMI_H
+#define SH_MOBILE_HDMI_H
+
+struct sh_mobile_lcdc_chan_cfg;
+struct device;
+
+struct sh_mobile_hdmi_info {
+ struct sh_mobile_lcdc_chan_cfg *lcd_chan;
+ struct device *lcd_dev;
+};
+
+#endif
#include <linux/fb.h>
-enum { RGB8, /* 24bpp, 8:8:8 */
- RGB9, /* 18bpp, 9:9 */
- RGB12A, /* 24bpp, 12:12 */
- RGB12B, /* 12bpp */
- RGB16, /* 16bpp */
- RGB18, /* 18bpp */
- RGB24, /* 24bpp */
- SYS8A, /* 24bpp, 8:8:8 */
- SYS8B, /* 18bpp, 8:8:2 */
- SYS8C, /* 18bpp, 2:8:8 */
- SYS8D, /* 16bpp, 8:8 */
- SYS9, /* 18bpp, 9:9 */
- SYS12, /* 24bpp, 12:12 */
- SYS16A, /* 16bpp */
- SYS16B, /* 18bpp, 16:2 */
- SYS16C, /* 18bpp, 2:16 */
- SYS18, /* 18bpp */
- SYS24 };/* 24bpp */
+enum {
+ RGB8, /* 24bpp, 8:8:8 */
+ RGB9, /* 18bpp, 9:9 */
+ RGB12A, /* 24bpp, 12:12 */
+ RGB12B, /* 12bpp */
+ RGB16, /* 16bpp */
+ RGB18, /* 18bpp */
+ RGB24, /* 24bpp */
+ YUV422, /* 16bpp */
+ SYS8A, /* 24bpp, 8:8:8 */
+ SYS8B, /* 18bpp, 8:8:2 */
+ SYS8C, /* 18bpp, 2:8:8 */
+ SYS8D, /* 16bpp, 8:8 */
+ SYS9, /* 18bpp, 9:9 */
+ SYS12, /* 24bpp, 12:12 */
+ SYS16A, /* 16bpp */
+ SYS16B, /* 18bpp, 16:2 */
+ SYS16C, /* 18bpp, 2:16 */
+ SYS18, /* 18bpp */
+ SYS24, /* 24bpp */
+};
enum { LCDC_CHAN_DISABLED = 0,
LCDC_CHAN_MAINLCD,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
void (*start_transfer)(void *board_data, void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
- void (*display_on)(void *board_data);
+ void (*display_on)(void *board_data, struct fb_info *info);
void (*display_off)(void *board_data);
};
#ifndef __XEN_PUBLIC_MEMORY_H__
#define __XEN_PUBLIC_MEMORY_H__
+#include <linux/spinlock.h>
+
/*
* Increase or decrease the specified domain's memory reservation. Returns a
* -ve errcode on failure, or the # extents successfully allocated or freed.
};
DEFINE_GUEST_HANDLE_STRUCT(xen_memory_reservation);
+/*
+ * An atomic exchange of memory pages. If return code is zero then
+ * @out.extent_list provides GMFNs of the newly-allocated memory.
+ * Returns zero on complete success, otherwise a negative error code.
+ * On complete success then always @nr_exchanged == @in.nr_extents.
+ * On partial success @nr_exchanged indicates how much work was done.
+ */
+#define XENMEM_exchange 11
+struct xen_memory_exchange {
+ /*
+ * [IN] Details of memory extents to be exchanged (GMFN bases).
+ * Note that @in.address_bits is ignored and unused.
+ */
+ struct xen_memory_reservation in;
+
+ /*
+ * [IN/OUT] Details of new memory extents.
+ * We require that:
+ * 1. @in.domid == @out.domid
+ * 2. @in.nr_extents << @in.extent_order ==
+ * @out.nr_extents << @out.extent_order
+ * 3. @in.extent_start and @out.extent_start lists must not overlap
+ * 4. @out.extent_start lists GPFN bases to be populated
+ * 5. @out.extent_start is overwritten with allocated GMFN bases
+ */
+ struct xen_memory_reservation out;
+
+ /*
+ * [OUT] Number of input extents that were successfully exchanged:
+ * 1. The first @nr_exchanged input extents were successfully
+ * deallocated.
+ * 2. The corresponding first entries in the output extent list correctly
+ * indicate the GMFNs that were successfully exchanged.
+ * 3. All other input and output extents are untouched.
+ * 4. If not all input exents are exchanged then the return code of this
+ * command will be non-zero.
+ * 5. THIS FIELD MUST BE INITIALISED TO ZERO BY THE CALLER!
+ */
+ unsigned long nr_exchanged;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_exchange);
/*
* Returns the maximum machine frame number of mapped RAM in this system.
* This command always succeeds (it never returns an error code).
};
DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list);
+
+/*
+ * Prevent the balloon driver from changing the memory reservation
+ * during a driver critical region.
+ */
+extern spinlock_t xen_reservation_lock;
#endif /* __XEN_PUBLIC_MEMORY_H__ */
--- /dev/null
+#ifndef __LINUX_SWIOTLB_XEN_H
+#define __LINUX_SWIOTLB_XEN_H
+
+#include <linux/swiotlb.h>
+
+extern void xen_swiotlb_init(int verbose);
+
+extern void
+*xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flags);
+
+extern void
+xen_swiotlb_free_coherent(struct device *hwdev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+extern dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs);
+
+extern void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
+ size_t size, enum dma_data_direction dir,
+ struct dma_attrs *attrs);
+/*
+extern int
+xen_swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nents,
+ enum dma_data_direction dir);
+
+extern void
+xen_swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
+ enum dma_data_direction dir);
+*/
+extern int
+xen_swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
+ int nelems, enum dma_data_direction dir,
+ struct dma_attrs *attrs);
+
+extern void
+xen_swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
+ int nelems, enum dma_data_direction dir,
+ struct dma_attrs *attrs);
+
+extern void
+xen_swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
+ size_t size, enum dma_data_direction dir);
+
+extern void
+xen_swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction dir);
+
+extern void
+xen_swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr,
+ size_t size, enum dma_data_direction dir);
+
+extern void
+xen_swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction dir);
+
+extern int
+xen_swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
+
+extern int
+xen_swiotlb_dma_supported(struct device *hwdev, u64 mask);
+
+#endif /* __LINUX_SWIOTLB_XEN_H */
int xen_setup_shutdown_event(void);
+extern unsigned long *xen_contiguous_bitmap;
+int xen_create_contiguous_region(unsigned long vstart, unsigned int order,
+ unsigned int address_bits);
+
+void xen_destroy_contiguous_region(unsigned long vstart, unsigned int order);
+
#endif /* INCLUDE_XEN_OPS_H */
help
Enable low-overhead system-call auditing infrastructure that
can be used independently or with another kernel subsystem,
- such as SELinux. To use audit's filesystem watch feature, please
- ensure that INOTIFY is configured.
+ such as SELinux.
+
+config AUDIT_WATCH
+ def_bool y
+ depends on AUDITSYSCALL
+ select FSNOTIFY
config AUDIT_TREE
def_bool y
depends on AUDITSYSCALL
- select INOTIFY
+ select FSNOTIFY
menu "RCU Subsystem"
could in turn add some fork/exit overhead.
config CGROUP_MEM_RES_CTLR_SWAP
- bool "Memory Resource Controller Swap Extension(EXPERIMENTAL)"
- depends on CGROUP_MEM_RES_CTLR && SWAP && EXPERIMENTAL
+ bool "Memory Resource Controller Swap Extension"
+ depends on CGROUP_MEM_RES_CTLR && SWAP
help
Add swap management feature to memory resource controller. When you
enable this, you can limit mem+swap usage per cgroup. In other words,
__setup("noinitrd", no_initrd);
-static int __init do_linuxrc(void * shell)
+static int __init do_linuxrc(void *_shell)
{
- static char *argv[] = { "linuxrc", NULL, };
- extern char * envp_init[];
+ static const char *argv[] = { "linuxrc", NULL, };
+ extern const char *envp_init[];
+ const char *shell = _shell;
sys_close(old_fd);sys_close(root_fd);
sys_setsid();
__setup("reset_devices", set_reset_devices);
-static char * argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
-char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
+static const char * argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
+const char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
static const char *panic_later, *panic_param;
-extern struct obs_kernel_param __setup_start[], __setup_end[];
+extern const struct obs_kernel_param __setup_start[], __setup_end[];
static int __init obsolete_checksetup(char *line)
{
- struct obs_kernel_param *p;
+ const struct obs_kernel_param *p;
int had_early_param = 0;
p = __setup_start;
/* Check for early params. */
static int __init do_early_param(char *param, char *val)
{
- struct obs_kernel_param *p;
+ const struct obs_kernel_param *p;
for (p = __setup_start; p < __setup_end; p++) {
if ((p->early && strcmp(param, p->str) == 0) ||
asmlinkage void __init start_kernel(void)
{
char * command_line;
- extern struct kernel_param __start___param[], __stop___param[];
+ extern const struct kernel_param __start___param[], __stop___param[];
smp_setup_processor_id();
do_one_initcall(*fn);
}
-static void run_init_process(char *init_filename)
+static void run_init_process(const char *init_filename)
{
argv_init[0] = init_filename;
kernel_execve(init_filename, argv_init, envp_init);
u->mq_bytes + mq_bytes >
task_rlimit(p, RLIMIT_MSGQUEUE)) {
spin_unlock(&mq_lock);
- /* mqueue_delete_inode() releases info->messages */
+ /* mqueue_evict_inode() releases info->messages */
goto out_inode;
}
u->mq_bytes += mq_bytes;
kmem_cache_free(mqueue_inode_cachep, MQUEUE_I(inode));
}
-static void mqueue_delete_inode(struct inode *inode)
+static void mqueue_evict_inode(struct inode *inode)
{
struct mqueue_inode_info *info;
struct user_struct *user;
int i;
struct ipc_namespace *ipc_ns;
- if (S_ISDIR(inode->i_mode)) {
- clear_inode(inode);
+ end_writeback(inode);
+
+ if (S_ISDIR(inode->i_mode))
return;
- }
+
ipc_ns = get_ns_from_inode(inode);
info = MQUEUE_I(inode);
spin_lock(&info->lock);
kfree(info->messages);
spin_unlock(&info->lock);
- clear_inode(inode);
-
/* Total amount of bytes accounted for the mqueue */
mq_bytes = info->attr.mq_maxmsg * (sizeof(struct msg_msg *)
+ info->attr.mq_msgsize);
static const struct super_operations mqueue_super_ops = {
.alloc_inode = mqueue_alloc_inode,
.destroy_inode = mqueue_destroy_inode,
+ .evict_inode = mqueue_evict_inode,
.statfs = simple_statfs,
- .delete_inode = mqueue_delete_inode,
- .drop_inode = generic_delete_inode,
};
static struct file_system_type mqueue_fs_type = {
obj-$(CONFIG_RESOURCE_COUNTERS) += res_counter.o
obj-$(CONFIG_SMP) += stop_machine.o
obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
-obj-$(CONFIG_AUDIT) += audit.o auditfilter.o audit_watch.o
+obj-$(CONFIG_AUDIT) += audit.o auditfilter.o
obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
-obj-$(CONFIG_GCOV_KERNEL) += gcov/
+obj-$(CONFIG_AUDIT_WATCH) += audit_watch.o
obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
+obj-$(CONFIG_GCOV_KERNEL) += gcov/
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_KGDB) += debug/
obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
spin_unlock(&acct_lock);
/* May block */
- if (vfs_statfs(file->f_path.dentry, &sbuf))
+ if (vfs_statfs(&file->f_path, &sbuf))
return res;
suspend = sbuf.f_blocks * SUSPEND;
resume = sbuf.f_blocks * RESUME;
#include <net/netlink.h>
#include <linux/skbuff.h>
#include <linux/netlink.h>
-#include <linux/inotify.h>
#include <linux/freezer.h>
#include <linux/tty.h>
extern void audit_free_rule_rcu(struct rcu_head *);
extern struct list_head audit_filter_list[];
+extern struct audit_entry *audit_dupe_rule(struct audit_krule *old);
+
/* audit watch functions */
-extern unsigned long audit_watch_inode(struct audit_watch *watch);
-extern dev_t audit_watch_dev(struct audit_watch *watch);
+#ifdef CONFIG_AUDIT_WATCH
extern void audit_put_watch(struct audit_watch *watch);
extern void audit_get_watch(struct audit_watch *watch);
extern int audit_to_watch(struct audit_krule *krule, char *path, int len, u32 op);
-extern int audit_add_watch(struct audit_krule *krule);
-extern void audit_remove_watch(struct audit_watch *watch);
-extern void audit_remove_watch_rule(struct audit_krule *krule, struct list_head *list);
-extern void audit_inotify_unregister(struct list_head *in_list);
+extern int audit_add_watch(struct audit_krule *krule, struct list_head **list);
+extern void audit_remove_watch_rule(struct audit_krule *krule);
extern char *audit_watch_path(struct audit_watch *watch);
-extern struct list_head *audit_watch_rules(struct audit_watch *watch);
-
-extern struct audit_entry *audit_dupe_rule(struct audit_krule *old,
- struct audit_watch *watch);
+extern int audit_watch_compare(struct audit_watch *watch, unsigned long ino, dev_t dev);
+#else
+#define audit_put_watch(w) {}
+#define audit_get_watch(w) {}
+#define audit_to_watch(k, p, l, o) (-EINVAL)
+#define audit_add_watch(k, l) (-EINVAL)
+#define audit_remove_watch_rule(k) BUG()
+#define audit_watch_path(w) ""
+#define audit_watch_compare(w, i, d) 0
+
+#endif /* CONFIG_AUDIT_WATCH */
#ifdef CONFIG_AUDIT_TREE
extern struct audit_chunk *audit_tree_lookup(const struct inode *);
#include "audit.h"
-#include <linux/inotify.h>
+#include <linux/fsnotify_backend.h>
#include <linux/namei.h>
#include <linux/mount.h>
#include <linux/kthread.h>
struct audit_chunk {
struct list_head hash;
- struct inotify_watch watch;
+ struct fsnotify_mark mark;
struct list_head trees; /* with root here */
int dead;
int count;
* tree is refcounted; one reference for "some rules on rules_list refer to
* it", one for each chunk with pointer to it.
*
- * chunk is refcounted by embedded inotify_watch + .refs (non-zero refcount
+ * chunk is refcounted by embedded fsnotify_mark + .refs (non-zero refcount
* of watch contributes 1 to .refs).
*
* node.index allows to get from node.list to containing chunk.
* that makes a difference. Some.
*/
-static struct inotify_handle *rtree_ih;
+static struct fsnotify_group *audit_tree_group;
static struct audit_tree *alloc_tree(const char *s)
{
return tree->pathname;
}
-static struct audit_chunk *alloc_chunk(int count)
-{
- struct audit_chunk *chunk;
- size_t size;
- int i;
-
- size = offsetof(struct audit_chunk, owners) + count * sizeof(struct node);
- chunk = kzalloc(size, GFP_KERNEL);
- if (!chunk)
- return NULL;
-
- INIT_LIST_HEAD(&chunk->hash);
- INIT_LIST_HEAD(&chunk->trees);
- chunk->count = count;
- atomic_long_set(&chunk->refs, 1);
- for (i = 0; i < count; i++) {
- INIT_LIST_HEAD(&chunk->owners[i].list);
- chunk->owners[i].index = i;
- }
- inotify_init_watch(&chunk->watch);
- return chunk;
-}
-
static void free_chunk(struct audit_chunk *chunk)
{
int i;
audit_put_chunk(chunk);
}
+static void audit_tree_destroy_watch(struct fsnotify_mark *entry)
+{
+ struct audit_chunk *chunk = container_of(entry, struct audit_chunk, mark);
+ call_rcu(&chunk->head, __put_chunk);
+}
+
+static struct audit_chunk *alloc_chunk(int count)
+{
+ struct audit_chunk *chunk;
+ size_t size;
+ int i;
+
+ size = offsetof(struct audit_chunk, owners) + count * sizeof(struct node);
+ chunk = kzalloc(size, GFP_KERNEL);
+ if (!chunk)
+ return NULL;
+
+ INIT_LIST_HEAD(&chunk->hash);
+ INIT_LIST_HEAD(&chunk->trees);
+ chunk->count = count;
+ atomic_long_set(&chunk->refs, 1);
+ for (i = 0; i < count; i++) {
+ INIT_LIST_HEAD(&chunk->owners[i].list);
+ chunk->owners[i].index = i;
+ }
+ fsnotify_init_mark(&chunk->mark, audit_tree_destroy_watch);
+ return chunk;
+}
+
enum {HASH_SIZE = 128};
static struct list_head chunk_hash_heads[HASH_SIZE];
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(hash_lock);
return chunk_hash_heads + n % HASH_SIZE;
}
-/* hash_lock is held by caller */
+/* hash_lock & entry->lock is held by caller */
static void insert_hash(struct audit_chunk *chunk)
{
- struct list_head *list = chunk_hash(chunk->watch.inode);
+ struct fsnotify_mark *entry = &chunk->mark;
+ struct list_head *list;
+
+ if (!entry->i.inode)
+ return;
+ list = chunk_hash(entry->i.inode);
list_add_rcu(&chunk->hash, list);
}
struct audit_chunk *p;
list_for_each_entry_rcu(p, list, hash) {
- if (p->watch.inode == inode) {
+ /* mark.inode may have gone NULL, but who cares? */
+ if (p->mark.i.inode == inode) {
atomic_long_inc(&p->refs);
return p;
}
static void untag_chunk(struct node *p)
{
struct audit_chunk *chunk = find_chunk(p);
+ struct fsnotify_mark *entry = &chunk->mark;
struct audit_chunk *new;
struct audit_tree *owner;
int size = chunk->count - 1;
int i, j;
- if (!pin_inotify_watch(&chunk->watch)) {
- /*
- * Filesystem is shutting down; all watches are getting
- * evicted, just take it off the node list for this
- * tree and let the eviction logics take care of the
- * rest.
- */
- owner = p->owner;
- if (owner->root == chunk) {
- list_del_init(&owner->same_root);
- owner->root = NULL;
- }
- list_del_init(&p->list);
- p->owner = NULL;
- put_tree(owner);
- return;
- }
+ fsnotify_get_mark(entry);
spin_unlock(&hash_lock);
- /*
- * pin_inotify_watch() succeeded, so the watch won't go away
- * from under us.
- */
- mutex_lock(&chunk->watch.inode->inotify_mutex);
- if (chunk->dead) {
- mutex_unlock(&chunk->watch.inode->inotify_mutex);
+ spin_lock(&entry->lock);
+ if (chunk->dead || !entry->i.inode) {
+ spin_unlock(&entry->lock);
goto out;
}
list_del_init(&p->list);
list_del_rcu(&chunk->hash);
spin_unlock(&hash_lock);
- inotify_evict_watch(&chunk->watch);
- mutex_unlock(&chunk->watch.inode->inotify_mutex);
- put_inotify_watch(&chunk->watch);
+ spin_unlock(&entry->lock);
+ fsnotify_destroy_mark(entry);
+ fsnotify_put_mark(entry);
goto out;
}
new = alloc_chunk(size);
if (!new)
goto Fallback;
- if (inotify_clone_watch(&chunk->watch, &new->watch) < 0) {
+ fsnotify_duplicate_mark(&new->mark, entry);
+ if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.i.inode, NULL, 1)) {
free_chunk(new);
goto Fallback;
}
list_for_each_entry(owner, &new->trees, same_root)
owner->root = new;
spin_unlock(&hash_lock);
- inotify_evict_watch(&chunk->watch);
- mutex_unlock(&chunk->watch.inode->inotify_mutex);
- put_inotify_watch(&chunk->watch);
+ spin_unlock(&entry->lock);
+ fsnotify_destroy_mark(entry);
+ fsnotify_put_mark(entry);
goto out;
Fallback:
p->owner = NULL;
put_tree(owner);
spin_unlock(&hash_lock);
- mutex_unlock(&chunk->watch.inode->inotify_mutex);
+ spin_unlock(&entry->lock);
out:
- unpin_inotify_watch(&chunk->watch);
+ fsnotify_put_mark(entry);
spin_lock(&hash_lock);
}
static int create_chunk(struct inode *inode, struct audit_tree *tree)
{
+ struct fsnotify_mark *entry;
struct audit_chunk *chunk = alloc_chunk(1);
if (!chunk)
return -ENOMEM;
- if (inotify_add_watch(rtree_ih, &chunk->watch, inode, IN_IGNORED | IN_DELETE_SELF) < 0) {
+ entry = &chunk->mark;
+ if (fsnotify_add_mark(entry, audit_tree_group, inode, NULL, 0)) {
free_chunk(chunk);
return -ENOSPC;
}
- mutex_lock(&inode->inotify_mutex);
+ spin_lock(&entry->lock);
spin_lock(&hash_lock);
if (tree->goner) {
spin_unlock(&hash_lock);
chunk->dead = 1;
- inotify_evict_watch(&chunk->watch);
- mutex_unlock(&inode->inotify_mutex);
- put_inotify_watch(&chunk->watch);
+ spin_unlock(&entry->lock);
+ fsnotify_destroy_mark(entry);
+ fsnotify_put_mark(entry);
return 0;
}
chunk->owners[0].index = (1U << 31);
}
insert_hash(chunk);
spin_unlock(&hash_lock);
- mutex_unlock(&inode->inotify_mutex);
+ spin_unlock(&entry->lock);
return 0;
}
/* the first tagged inode becomes root of tree */
static int tag_chunk(struct inode *inode, struct audit_tree *tree)
{
- struct inotify_watch *watch;
+ struct fsnotify_mark *old_entry, *chunk_entry;
struct audit_tree *owner;
struct audit_chunk *chunk, *old;
struct node *p;
int n;
- if (inotify_find_watch(rtree_ih, inode, &watch) < 0)
+ old_entry = fsnotify_find_inode_mark(audit_tree_group, inode);
+ if (!old_entry)
return create_chunk(inode, tree);
- old = container_of(watch, struct audit_chunk, watch);
+ old = container_of(old_entry, struct audit_chunk, mark);
/* are we already there? */
spin_lock(&hash_lock);
for (n = 0; n < old->count; n++) {
if (old->owners[n].owner == tree) {
spin_unlock(&hash_lock);
- put_inotify_watch(&old->watch);
+ fsnotify_put_mark(old_entry);
return 0;
}
}
chunk = alloc_chunk(old->count + 1);
if (!chunk) {
- put_inotify_watch(&old->watch);
+ fsnotify_put_mark(old_entry);
return -ENOMEM;
}
- mutex_lock(&inode->inotify_mutex);
- if (inotify_clone_watch(&old->watch, &chunk->watch) < 0) {
- mutex_unlock(&inode->inotify_mutex);
- put_inotify_watch(&old->watch);
+ chunk_entry = &chunk->mark;
+
+ spin_lock(&old_entry->lock);
+ if (!old_entry->i.inode) {
+ /* old_entry is being shot, lets just lie */
+ spin_unlock(&old_entry->lock);
+ fsnotify_put_mark(old_entry);
free_chunk(chunk);
+ return -ENOENT;
+ }
+
+ fsnotify_duplicate_mark(chunk_entry, old_entry);
+ if (fsnotify_add_mark(chunk_entry, chunk_entry->group, chunk_entry->i.inode, NULL, 1)) {
+ spin_unlock(&old_entry->lock);
+ free_chunk(chunk);
+ fsnotify_put_mark(old_entry);
return -ENOSPC;
}
+
+ /* even though we hold old_entry->lock, this is safe since chunk_entry->lock could NEVER have been grabbed before */
+ spin_lock(&chunk_entry->lock);
spin_lock(&hash_lock);
+
+ /* we now hold old_entry->lock, chunk_entry->lock, and hash_lock */
if (tree->goner) {
spin_unlock(&hash_lock);
chunk->dead = 1;
- inotify_evict_watch(&chunk->watch);
- mutex_unlock(&inode->inotify_mutex);
- put_inotify_watch(&old->watch);
- put_inotify_watch(&chunk->watch);
+ spin_unlock(&chunk_entry->lock);
+ spin_unlock(&old_entry->lock);
+
+ fsnotify_destroy_mark(chunk_entry);
+
+ fsnotify_put_mark(chunk_entry);
+ fsnotify_put_mark(old_entry);
return 0;
}
list_replace_init(&old->trees, &chunk->trees);
list_add(&tree->same_root, &chunk->trees);
}
spin_unlock(&hash_lock);
- inotify_evict_watch(&old->watch);
- mutex_unlock(&inode->inotify_mutex);
- put_inotify_watch(&old->watch); /* pair to inotify_find_watch */
- put_inotify_watch(&old->watch); /* and kill it */
+ spin_unlock(&chunk_entry->lock);
+ spin_unlock(&old_entry->lock);
+ fsnotify_destroy_mark(old_entry);
+ fsnotify_put_mark(old_entry); /* pair to fsnotify_find mark_entry */
+ fsnotify_put_mark(old_entry); /* and kill it */
return 0;
}
spin_lock(&hash_lock);
list_for_each_entry(node, &tree->chunks, list) {
- struct inode *inode = find_chunk(node)->watch.inode;
+ struct audit_chunk *chunk = find_chunk(node);
+ /* this could be NULL if the watch is dieing else where... */
+ struct inode *inode = chunk->mark.i.inode;
node->index |= 1U<<31;
if (iterate_mounts(compare_root, inode, root_mnt))
node->index &= ~(1U<<31);
* Here comes the stuff asynchronous to auditctl operations
*/
-/* inode->inotify_mutex is locked */
static void evict_chunk(struct audit_chunk *chunk)
{
struct audit_tree *owner;
mutex_unlock(&audit_filter_mutex);
}
-static void handle_event(struct inotify_watch *watch, u32 wd, u32 mask,
- u32 cookie, const char *dname, struct inode *inode)
+static int audit_tree_handle_event(struct fsnotify_group *group,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmonut_mark,
+ struct fsnotify_event *event)
+{
+ BUG();
+ return -EOPNOTSUPP;
+}
+
+static void audit_tree_freeing_mark(struct fsnotify_mark *entry, struct fsnotify_group *group)
{
- struct audit_chunk *chunk = container_of(watch, struct audit_chunk, watch);
+ struct audit_chunk *chunk = container_of(entry, struct audit_chunk, mark);
- if (mask & IN_IGNORED) {
- evict_chunk(chunk);
- put_inotify_watch(watch);
- }
+ evict_chunk(chunk);
+ fsnotify_put_mark(entry);
}
-static void destroy_watch(struct inotify_watch *watch)
+static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *inode,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
+ __u32 mask, void *data, int data_type)
{
- struct audit_chunk *chunk = container_of(watch, struct audit_chunk, watch);
- call_rcu(&chunk->head, __put_chunk);
+ return false;
}
-static const struct inotify_operations rtree_inotify_ops = {
- .handle_event = handle_event,
- .destroy_watch = destroy_watch,
+static const struct fsnotify_ops audit_tree_ops = {
+ .handle_event = audit_tree_handle_event,
+ .should_send_event = audit_tree_send_event,
+ .free_group_priv = NULL,
+ .free_event_priv = NULL,
+ .freeing_mark = audit_tree_freeing_mark,
};
static int __init audit_tree_init(void)
{
int i;
- rtree_ih = inotify_init(&rtree_inotify_ops);
- if (IS_ERR(rtree_ih))
- audit_panic("cannot initialize inotify handle for rectree watches");
+ audit_tree_group = fsnotify_alloc_group(&audit_tree_ops);
+ if (IS_ERR(audit_tree_group))
+ audit_panic("cannot initialize fsnotify group for rectree watches");
for (i = 0; i < HASH_SIZE; i++)
INIT_LIST_HEAD(&chunk_hash_heads[i]);
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/fs.h>
+#include <linux/fsnotify_backend.h>
#include <linux/namei.h>
#include <linux/netlink.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/inotify.h>
#include <linux/security.h>
#include "audit.h"
/*
* Reference counting:
*
- * audit_parent: lifetime is from audit_init_parent() to receipt of an IN_IGNORED
+ * audit_parent: lifetime is from audit_init_parent() to receipt of an FS_IGNORED
* event. Each audit_watch holds a reference to its associated parent.
*
* audit_watch: if added to lists, lifetime is from audit_init_watch() to
unsigned long ino; /* associated inode number */
struct audit_parent *parent; /* associated parent */
struct list_head wlist; /* entry in parent->watches list */
- struct list_head rules; /* associated rules */
+ struct list_head rules; /* anchor for krule->rlist */
};
struct audit_parent {
- struct list_head ilist; /* entry in inotify registration list */
- struct list_head watches; /* associated watches */
- struct inotify_watch wdata; /* inotify watch data */
- unsigned flags; /* status flags */
+ struct list_head watches; /* anchor for audit_watch->wlist */
+ struct fsnotify_mark mark; /* fsnotify mark on the inode */
};
-/* Inotify handle. */
-struct inotify_handle *audit_ih;
+/* fsnotify handle. */
+struct fsnotify_group *audit_watch_group;
-/*
- * audit_parent status flags:
- *
- * AUDIT_PARENT_INVALID - set anytime rules/watches are auto-removed due to
- * a filesystem event to ensure we're adding audit watches to a valid parent.
- * Technically not needed for IN_DELETE_SELF or IN_UNMOUNT events, as we cannot
- * receive them while we have nameidata, but must be used for IN_MOVE_SELF which
- * we can receive while holding nameidata.
- */
-#define AUDIT_PARENT_INVALID 0x001
+/* fsnotify events we care about. */
+#define AUDIT_FS_WATCH (FS_MOVE | FS_CREATE | FS_DELETE | FS_DELETE_SELF |\
+ FS_MOVE_SELF | FS_EVENT_ON_CHILD)
-/* Inotify events we care about. */
-#define AUDIT_IN_WATCH IN_MOVE|IN_CREATE|IN_DELETE|IN_DELETE_SELF|IN_MOVE_SELF
+static void audit_free_parent(struct audit_parent *parent)
+{
+ WARN_ON(!list_empty(&parent->watches));
+ kfree(parent);
+}
-static void audit_free_parent(struct inotify_watch *i_watch)
+static void audit_watch_free_mark(struct fsnotify_mark *entry)
{
struct audit_parent *parent;
- parent = container_of(i_watch, struct audit_parent, wdata);
- WARN_ON(!list_empty(&parent->watches));
- kfree(parent);
+ parent = container_of(entry, struct audit_parent, mark);
+ audit_free_parent(parent);
+}
+
+static void audit_get_parent(struct audit_parent *parent)
+{
+ if (likely(parent))
+ fsnotify_get_mark(&parent->mark);
+}
+
+static void audit_put_parent(struct audit_parent *parent)
+{
+ if (likely(parent))
+ fsnotify_put_mark(&parent->mark);
+}
+
+/*
+ * Find and return the audit_parent on the given inode. If found a reference
+ * is taken on this parent.
+ */
+static inline struct audit_parent *audit_find_parent(struct inode *inode)
+{
+ struct audit_parent *parent = NULL;
+ struct fsnotify_mark *entry;
+
+ entry = fsnotify_find_inode_mark(audit_watch_group, inode);
+ if (entry)
+ parent = container_of(entry, struct audit_parent, mark);
+
+ return parent;
}
void audit_get_watch(struct audit_watch *watch)
void audit_remove_watch(struct audit_watch *watch)
{
list_del(&watch->wlist);
- put_inotify_watch(&watch->parent->wdata);
+ audit_put_parent(watch->parent);
watch->parent = NULL;
audit_put_watch(watch); /* match initial get */
}
return watch->path;
}
-struct list_head *audit_watch_rules(struct audit_watch *watch)
-{
- return &watch->rules;
-}
-
-unsigned long audit_watch_inode(struct audit_watch *watch)
+int audit_watch_compare(struct audit_watch *watch, unsigned long ino, dev_t dev)
{
- return watch->ino;
-}
-
-dev_t audit_watch_dev(struct audit_watch *watch)
-{
- return watch->dev;
+ return (watch->ino != (unsigned long)-1) &&
+ (watch->ino == ino) &&
+ (watch->dev == dev);
}
/* Initialize a parent watch entry. */
static struct audit_parent *audit_init_parent(struct nameidata *ndp)
{
+ struct inode *inode = ndp->path.dentry->d_inode;
struct audit_parent *parent;
- s32 wd;
+ int ret;
parent = kzalloc(sizeof(*parent), GFP_KERNEL);
if (unlikely(!parent))
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&parent->watches);
- parent->flags = 0;
-
- inotify_init_watch(&parent->wdata);
- /* grab a ref so inotify watch hangs around until we take audit_filter_mutex */
- get_inotify_watch(&parent->wdata);
- wd = inotify_add_watch(audit_ih, &parent->wdata,
- ndp->path.dentry->d_inode, AUDIT_IN_WATCH);
- if (wd < 0) {
- audit_free_parent(&parent->wdata);
- return ERR_PTR(wd);
+
+ fsnotify_init_mark(&parent->mark, audit_watch_free_mark);
+ parent->mark.mask = AUDIT_FS_WATCH;
+ ret = fsnotify_add_mark(&parent->mark, audit_watch_group, inode, NULL, 0);
+ if (ret < 0) {
+ audit_free_parent(parent);
+ return ERR_PTR(ret);
}
return parent;
{
struct audit_watch *watch;
- if (!audit_ih)
+ if (!audit_watch_group)
return -EOPNOTSUPP;
if (path[0] != '/' || path[len-1] == '/' ||
new->dev = old->dev;
new->ino = old->ino;
- get_inotify_watch(&old->parent->wdata);
+ audit_get_parent(old->parent);
new->parent = old->parent;
out:
struct audit_entry *oentry, *nentry;
mutex_lock(&audit_filter_mutex);
+ /* Run all of the watches on this parent looking for the one that
+ * matches the given dname */
list_for_each_entry_safe(owatch, nextw, &parent->watches, wlist) {
if (audit_compare_dname_path(dname, owatch->path, NULL))
continue;
/* If the update involves invalidating rules, do the inode-based
* filtering now, so we don't omit records. */
- if (invalidating && current->audit_context)
+ if (invalidating && !audit_dummy_context())
audit_filter_inodes(current, current->audit_context);
+ /* updating ino will likely change which audit_hash_list we
+ * are on so we need a new watch for the new list */
nwatch = audit_dupe_watch(owatch);
if (IS_ERR(nwatch)) {
mutex_unlock(&audit_filter_mutex);
list_del(&oentry->rule.rlist);
list_del_rcu(&oentry->list);
- nentry = audit_dupe_rule(&oentry->rule, nwatch);
+ nentry = audit_dupe_rule(&oentry->rule);
if (IS_ERR(nentry)) {
list_del(&oentry->rule.list);
audit_panic("error updating watch, removing");
} else {
int h = audit_hash_ino((u32)ino);
+
+ /*
+ * nentry->rule.watch == oentry->rule.watch so
+ * we must drop that reference and set it to our
+ * new watch.
+ */
+ audit_put_watch(nentry->rule.watch);
+ audit_get_watch(nwatch);
+ nentry->rule.watch = nwatch;
list_add(&nentry->rule.rlist, &nwatch->rules);
list_add_rcu(&nentry->list, &audit_inode_hash[h]);
list_replace(&oentry->rule.list,
struct audit_entry *e;
mutex_lock(&audit_filter_mutex);
- parent->flags |= AUDIT_PARENT_INVALID;
list_for_each_entry_safe(w, nextw, &parent->watches, wlist) {
list_for_each_entry_safe(r, nextr, &w->rules, rlist) {
e = container_of(r, struct audit_entry, rule);
audit_remove_watch(w);
}
mutex_unlock(&audit_filter_mutex);
-}
-
-/* Unregister inotify watches for parents on in_list.
- * Generates an IN_IGNORED event. */
-void audit_inotify_unregister(struct list_head *in_list)
-{
- struct audit_parent *p, *n;
- list_for_each_entry_safe(p, n, in_list, ilist) {
- list_del(&p->ilist);
- inotify_rm_watch(audit_ih, &p->wdata);
- /* the unpin matching the pin in audit_do_del_rule() */
- unpin_inotify_watch(&p->wdata);
- }
+ fsnotify_destroy_mark(&parent->mark);
}
/* Get path information necessary for adding watches. */
}
}
-/* Associate the given rule with an existing parent inotify_watch.
+/* Associate the given rule with an existing parent.
* Caller must hold audit_filter_mutex. */
static void audit_add_to_parent(struct audit_krule *krule,
struct audit_parent *parent)
struct audit_watch *w, *watch = krule->watch;
int watch_found = 0;
+ BUG_ON(!mutex_is_locked(&audit_filter_mutex));
+
list_for_each_entry(w, &parent->watches, wlist) {
if (strcmp(watch->path, w->path))
continue;
}
if (!watch_found) {
- get_inotify_watch(&parent->wdata);
+ audit_get_parent(parent);
watch->parent = parent;
list_add(&watch->wlist, &parent->watches);
/* Find a matching watch entry, or add this one.
* Caller must hold audit_filter_mutex. */
-int audit_add_watch(struct audit_krule *krule)
+int audit_add_watch(struct audit_krule *krule, struct list_head **list)
{
struct audit_watch *watch = krule->watch;
- struct inotify_watch *i_watch;
struct audit_parent *parent;
struct nameidata *ndp = NULL, *ndw = NULL;
- int ret = 0;
+ int h, ret = 0;
mutex_unlock(&audit_filter_mutex);
goto error;
}
+ mutex_lock(&audit_filter_mutex);
+
/* update watch filter fields */
if (ndw) {
watch->dev = ndw->path.dentry->d_inode->i_sb->s_dev;
watch->ino = ndw->path.dentry->d_inode->i_ino;
}
- /* The audit_filter_mutex must not be held during inotify calls because
- * we hold it during inotify event callback processing. If an existing
- * inotify watch is found, inotify_find_watch() grabs a reference before
- * returning.
- */
- if (inotify_find_watch(audit_ih, ndp->path.dentry->d_inode,
- &i_watch) < 0) {
+ /* either find an old parent or attach a new one */
+ parent = audit_find_parent(ndp->path.dentry->d_inode);
+ if (!parent) {
parent = audit_init_parent(ndp);
if (IS_ERR(parent)) {
- /* caller expects mutex locked */
- mutex_lock(&audit_filter_mutex);
ret = PTR_ERR(parent);
goto error;
}
- } else
- parent = container_of(i_watch, struct audit_parent, wdata);
-
- mutex_lock(&audit_filter_mutex);
+ }
- /* parent was moved before we took audit_filter_mutex */
- if (parent->flags & AUDIT_PARENT_INVALID)
- ret = -ENOENT;
- else
- audit_add_to_parent(krule, parent);
+ audit_add_to_parent(krule, parent);
- /* match get in audit_init_parent or inotify_find_watch */
- put_inotify_watch(&parent->wdata);
+ /* match get in audit_find_parent or audit_init_parent */
+ audit_put_parent(parent);
+ h = audit_hash_ino((u32)watch->ino);
+ *list = &audit_inode_hash[h];
error:
audit_put_nd(ndp, ndw); /* NULL args OK */
return ret;
}
-void audit_remove_watch_rule(struct audit_krule *krule, struct list_head *list)
+void audit_remove_watch_rule(struct audit_krule *krule)
{
struct audit_watch *watch = krule->watch;
struct audit_parent *parent = watch->parent;
audit_remove_watch(watch);
if (list_empty(&parent->watches)) {
- /* Put parent on the inotify un-registration
- * list. Grab a reference before releasing
- * audit_filter_mutex, to be released in
- * audit_inotify_unregister().
- * If filesystem is going away, just leave
- * the sucker alone, eviction will take
- * care of it. */
- if (pin_inotify_watch(&parent->wdata))
- list_add(&parent->ilist, list);
+ audit_get_parent(parent);
+ fsnotify_destroy_mark(&parent->mark);
+ audit_put_parent(parent);
}
}
}
-/* Update watch data in audit rules based on inotify events. */
-static void audit_handle_ievent(struct inotify_watch *i_watch, u32 wd, u32 mask,
- u32 cookie, const char *dname, struct inode *inode)
+static bool audit_watch_should_send_event(struct fsnotify_group *group, struct inode *inode,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
+ __u32 mask, void *data, int data_type)
+{
+ return true;
+}
+
+/* Update watch data in audit rules based on fsnotify events. */
+static int audit_watch_handle_event(struct fsnotify_group *group,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
+ struct fsnotify_event *event)
{
+ struct inode *inode;
+ __u32 mask = event->mask;
+ const char *dname = event->file_name;
struct audit_parent *parent;
- parent = container_of(i_watch, struct audit_parent, wdata);
+ parent = container_of(inode_mark, struct audit_parent, mark);
- if (mask & (IN_CREATE|IN_MOVED_TO) && inode)
- audit_update_watch(parent, dname, inode->i_sb->s_dev,
- inode->i_ino, 0);
- else if (mask & (IN_DELETE|IN_MOVED_FROM))
+ BUG_ON(group != audit_watch_group);
+
+ switch (event->data_type) {
+ case (FSNOTIFY_EVENT_PATH):
+ inode = event->path.dentry->d_inode;
+ break;
+ case (FSNOTIFY_EVENT_INODE):
+ inode = event->inode;
+ break;
+ default:
+ BUG();
+ inode = NULL;
+ break;
+ };
+
+ if (mask & (FS_CREATE|FS_MOVED_TO) && inode)
+ audit_update_watch(parent, dname, inode->i_sb->s_dev, inode->i_ino, 0);
+ else if (mask & (FS_DELETE|FS_MOVED_FROM))
audit_update_watch(parent, dname, (dev_t)-1, (unsigned long)-1, 1);
- /* inotify automatically removes the watch and sends IN_IGNORED */
- else if (mask & (IN_DELETE_SELF|IN_UNMOUNT))
- audit_remove_parent_watches(parent);
- /* inotify does not remove the watch, so remove it manually */
- else if(mask & IN_MOVE_SELF) {
+ else if (mask & (FS_DELETE_SELF|FS_UNMOUNT|FS_MOVE_SELF))
audit_remove_parent_watches(parent);
- inotify_remove_watch_locked(audit_ih, i_watch);
- } else if (mask & IN_IGNORED)
- put_inotify_watch(i_watch);
+
+ return 0;
}
-static const struct inotify_operations audit_inotify_ops = {
- .handle_event = audit_handle_ievent,
- .destroy_watch = audit_free_parent,
+static const struct fsnotify_ops audit_watch_fsnotify_ops = {
+ .should_send_event = audit_watch_should_send_event,
+ .handle_event = audit_watch_handle_event,
+ .free_group_priv = NULL,
+ .freeing_mark = NULL,
+ .free_event_priv = NULL,
};
static int __init audit_watch_init(void)
{
- audit_ih = inotify_init(&audit_inotify_ops);
- if (IS_ERR(audit_ih))
- audit_panic("cannot initialize inotify handle");
+ audit_watch_group = fsnotify_alloc_group(&audit_watch_fsnotify_ops);
+ if (IS_ERR(audit_watch_group)) {
+ audit_watch_group = NULL;
+ audit_panic("cannot create audit fsnotify group");
+ }
return 0;
}
-subsys_initcall(audit_watch_init);
+device_initcall(audit_watch_init);
{
int i;
struct audit_krule *erule = &e->rule;
+
/* some rules don't have associated watches */
if (erule->watch)
audit_put_watch(erule->watch);
* rule with the new rule in the filterlist, then free the old rule.
* The rlist element is undefined; list manipulations are handled apart from
* the initial copy. */
-struct audit_entry *audit_dupe_rule(struct audit_krule *old,
- struct audit_watch *watch)
+struct audit_entry *audit_dupe_rule(struct audit_krule *old)
{
u32 fcount = old->field_count;
struct audit_entry *entry;
new->prio = old->prio;
new->buflen = old->buflen;
new->inode_f = old->inode_f;
- new->watch = NULL;
new->field_count = old->field_count;
+
/*
* note that we are OK with not refcounting here; audit_match_tree()
* never dereferences tree and we can't get false positives there
}
}
- if (watch) {
- audit_get_watch(watch);
- new->watch = watch;
+ if (old->watch) {
+ audit_get_watch(old->watch);
+ new->watch = old->watch;
}
return entry;
struct audit_watch *watch = entry->rule.watch;
struct audit_tree *tree = entry->rule.tree;
struct list_head *list;
- int h, err;
+ int err;
#ifdef CONFIG_AUDITSYSCALL
int dont_count = 0;
if (watch) {
/* audit_filter_mutex is dropped and re-taken during this call */
- err = audit_add_watch(&entry->rule);
+ err = audit_add_watch(&entry->rule, &list);
if (err) {
mutex_unlock(&audit_filter_mutex);
goto error;
}
- /* entry->rule.watch may have changed during audit_add_watch() */
- watch = entry->rule.watch;
- h = audit_hash_ino((u32)audit_watch_inode(watch));
- list = &audit_inode_hash[h];
}
if (tree) {
err = audit_add_tree_rule(&entry->rule);
struct audit_watch *watch = entry->rule.watch;
struct audit_tree *tree = entry->rule.tree;
struct list_head *list;
- LIST_HEAD(inotify_list);
int ret = 0;
#ifdef CONFIG_AUDITSYSCALL
int dont_count = 0;
}
if (e->rule.watch)
- audit_remove_watch_rule(&e->rule, &inotify_list);
+ audit_remove_watch_rule(&e->rule);
if (e->rule.tree)
audit_remove_tree_rule(&e->rule);
#endif
mutex_unlock(&audit_filter_mutex);
- if (!list_empty(&inotify_list))
- audit_inotify_unregister(&inotify_list);
-
out:
if (watch)
audit_put_watch(watch); /* match initial get */
{
struct audit_entry *entry = container_of(r, struct audit_entry, rule);
struct audit_entry *nentry;
- struct audit_watch *watch;
- struct audit_tree *tree;
int err = 0;
if (!security_audit_rule_known(r))
return 0;
- watch = r->watch;
- tree = r->tree;
- nentry = audit_dupe_rule(r, watch);
+ nentry = audit_dupe_rule(r);
if (IS_ERR(nentry)) {
/* save the first error encountered for the
* return value */
err = PTR_ERR(nentry);
audit_panic("error updating LSM filters");
- if (watch)
+ if (r->watch)
list_del(&r->rlist);
list_del_rcu(&entry->list);
list_del(&r->list);
} else {
- if (watch) {
- list_add(&nentry->rule.rlist, audit_watch_rules(watch));
- list_del(&r->rlist);
- } else if (tree)
+ if (r->watch || r->tree)
list_replace_init(&r->rlist, &nentry->rule.rlist);
list_replace_rcu(&entry->list, &nentry->list);
list_replace(&r->list, &nentry->rule.list);
#include <linux/binfmts.h>
#include <linux/highmem.h>
#include <linux/syscalls.h>
-#include <linux/inotify.h>
#include <linux/capability.h>
#include <linux/fs_struct.h>
}
break;
case AUDIT_WATCH:
- if (name && audit_watch_inode(rule->watch) != (unsigned long)-1)
- result = (name->dev == audit_watch_dev(rule->watch) &&
- name->ino == audit_watch_inode(rule->watch));
+ if (name)
+ result = audit_watch_compare(rule->watch, name->ino, name->dev);
break;
case AUDIT_DIR:
if (ctx)
struct audit_tree_refs *p;
struct audit_chunk *chunk;
int count;
- if (likely(list_empty(&inode->inotify_watches)))
+ if (likely(hlist_empty(&inode->i_fsnotify_marks)))
return;
context = current->audit_context;
p = context->trees;
seq = read_seqbegin(&rename_lock);
for(;;) {
struct inode *inode = d->d_inode;
- if (inode && unlikely(!list_empty(&inode->inotify_watches))) {
+ if (inode && unlikely(!hlist_empty(&inode->i_fsnotify_marks))) {
struct audit_chunk *chunk;
chunk = audit_tree_lookup(inode);
if (chunk) {
context->names[context->name_count].ino = (unsigned long)-1;
context->names[context->name_count].osid = 0;
++context->name_count;
- if (!context->pwd.dentry) {
- read_lock(¤t->fs->lock);
- context->pwd = current->fs->pwd;
- path_get(¤t->fs->pwd);
- read_unlock(¤t->fs->lock);
- }
-
+ if (!context->pwd.dentry)
+ get_fs_pwd(current->fs, &context->pwd);
}
/* audit_putname - intercept a putname request
if (opts->release_agent)
return -EINVAL;
opts->release_agent =
- kstrndup(token + 14, PATH_MAX, GFP_KERNEL);
+ kstrndup(token + 14, PATH_MAX - 1, GFP_KERNEL);
if (!opts->release_agent)
return -ENOMEM;
} else if (!strncmp(token, "name=", 5)) {
if (opts->name)
return -EINVAL;
opts->name = kstrndup(name,
- MAX_CGROUP_ROOT_NAMELEN,
+ MAX_CGROUP_ROOT_NAMELEN - 1,
GFP_KERNEL);
if (!opts->name)
return -ENOMEM;
struct compat_rlimit __user *rlim)
{
struct rlimit r;
- int ret;
- mm_segment_t old_fs = get_fs ();
-
- if (resource >= RLIM_NLIMITS)
- return -EINVAL;
if (!access_ok(VERIFY_READ, rlim, sizeof(*rlim)) ||
__get_user(r.rlim_cur, &rlim->rlim_cur) ||
r.rlim_cur = RLIM_INFINITY;
if (r.rlim_max == COMPAT_RLIM_INFINITY)
r.rlim_max = RLIM_INFINITY;
- set_fs(KERNEL_DS);
- ret = sys_setrlimit(resource, (struct rlimit __user *) &r);
- set_fs(old_fs);
- return ret;
+ return do_prlimit(current, resource, &r, NULL);
}
#ifdef COMPAT_RLIM_OLD_INFINITY
#endif
-asmlinkage long compat_sys_getrlimit (unsigned int resource,
+asmlinkage long compat_sys_getrlimit(unsigned int resource,
struct compat_rlimit __user *rlim)
{
struct rlimit r;
int ret;
- mm_segment_t old_fs = get_fs();
- set_fs(KERNEL_DS);
- ret = sys_getrlimit(resource, (struct rlimit __user *) &r);
- set_fs(old_fs);
+ ret = do_prlimit(current, resource, NULL, &r);
if (!ret) {
if (r.rlim_cur > COMPAT_RLIM_INFINITY)
r.rlim_cur = COMPAT_RLIM_INFINITY;
#define kdebug(FMT, ...) \
printk("[%-5.5s%5u] "FMT"\n", current->comm, current->pid ,##__VA_ARGS__)
#else
-static inline __attribute__((format(printf, 1, 2)))
-void no_printk(const char *fmt, ...)
-{
-}
#define kdebug(FMT, ...) \
no_printk("[%-5.5s%5u] "FMT"\n", current->comm, current->pid ,##__VA_ARGS__)
#endif
extern void kdb_print_nameval(const char *name, unsigned long val);
extern void kdb_send_sig_info(struct task_struct *p, struct siginfo *info);
extern void kdb_meminfo_proc_show(void);
+#ifdef CONFIG_KALLSYMS
extern const char *kdb_walk_kallsyms(loff_t *pos);
+#else /* ! CONFIG_KALLSYMS */
+static inline const char *kdb_walk_kallsyms(loff_t *pos)
+{
+ return NULL;
+}
+#endif /* ! CONFIG_KALLSYMS */
extern char *kdb_getstr(char *, size_t, char *);
/* Defines for kdb_symbol_print */
int kdbnearsym(unsigned long addr, kdb_symtab_t *symtab)
{
int ret = 0;
- unsigned long symbolsize;
- unsigned long offset;
+ unsigned long symbolsize = 0;
+ unsigned long offset = 0;
#define knt1_size 128 /* must be >= kallsyms table size */
char *knt1 = NULL;
struct task_struct *p, *n, *reaper;
LIST_HEAD(dead_children);
- exit_ptrace(father);
-
write_lock_irq(&tasklist_lock);
+ /*
+ * Note that exit_ptrace() and find_new_reaper() might
+ * drop tasklist_lock and reacquire it.
+ */
+ exit_ptrace(father);
reaper = find_new_reaper(father);
list_for_each_entry_safe(p, n, &father->children, sibling) {
if (!unlikely(wo->wo_flags & WNOWAIT))
*p_code = 0;
- /* don't need the RCU readlock here as we're holding a spinlock */
- uid = __task_cred(p)->uid;
+ uid = task_uid(p);
unlock_sig:
spin_unlock_irq(&p->sighand->siglock);
if (!exit_code)
}
if (!unlikely(wo->wo_flags & WNOWAIT))
p->signal->flags &= ~SIGNAL_STOP_CONTINUED;
- uid = __task_cred(p)->uid;
+ uid = task_uid(p);
spin_unlock_irq(&p->sighand->siglock);
pid = task_pid_vnr(p);
struct fs_struct *fs = current->fs;
if (clone_flags & CLONE_FS) {
/* tsk->fs is already what we want */
- write_lock(&fs->lock);
+ spin_lock(&fs->lock);
if (fs->in_exec) {
- write_unlock(&fs->lock);
+ spin_unlock(&fs->lock);
return -EAGAIN;
}
fs->users++;
- write_unlock(&fs->lock);
+ spin_unlock(&fs->lock);
return 0;
}
tsk->fs = copy_fs_struct(fs);
if (new_fs) {
fs = current->fs;
- write_lock(&fs->lock);
+ spin_lock(&fs->lock);
current->fs = new_fs;
if (--fs->users)
new_fs = NULL;
else
new_fs = fs;
- write_unlock(&fs->lock);
+ spin_unlock(&fs->lock);
}
if (new_mm) {
image->nr_segments = nr_segments;
segment_bytes = nr_segments * sizeof(*segments);
result = copy_from_user(image->segment, segments, segment_bytes);
- if (result)
+ if (result) {
+ result = -EFAULT;
goto out;
+ }
/*
* Verify we have good destination addresses. The caller is
result = copy_from_user(ptr, buf, uchunk);
kunmap(page);
if (result) {
- result = (result < 0) ? result : -EIO;
+ result = -EFAULT;
goto out;
}
ubytes -= uchunk;
kexec_flush_icache_page(page);
kunmap(page);
if (result) {
- result = (result < 0) ? result : -EIO;
+ result = -EFAULT;
goto out;
}
ubytes -= uchunk;
/*
- * A generic kernel FIFO implementation.
+ * A generic kernel FIFO implementation
*
- * Copyright (C) 2009 Stefani Seibold <stefani@seibold.net>
- * Copyright (C) 2004 Stelian Pop <stelian@popies.net>
+ * Copyright (C) 2009/2010 Stefani Seibold <stefani@seibold.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
-#include <linux/kfifo.h>
#include <linux/log2.h>
#include <linux/uaccess.h>
+#include <linux/kfifo.h>
-static void _kfifo_init(struct kfifo *fifo, void *buffer,
- unsigned int size)
-{
- fifo->buffer = buffer;
- fifo->size = size;
-
- kfifo_reset(fifo);
-}
-
-/**
- * kfifo_init - initialize a FIFO using a preallocated buffer
- * @fifo: the fifo to assign the buffer
- * @buffer: the preallocated buffer to be used.
- * @size: the size of the internal buffer, this has to be a power of 2.
- *
+/*
+ * internal helper to calculate the unused elements in a fifo
*/
-void kfifo_init(struct kfifo *fifo, void *buffer, unsigned int size)
+static inline unsigned int kfifo_unused(struct __kfifo *fifo)
{
- /* size must be a power of 2 */
- BUG_ON(!is_power_of_2(size));
-
- _kfifo_init(fifo, buffer, size);
+ return (fifo->mask + 1) - (fifo->in - fifo->out);
}
-EXPORT_SYMBOL(kfifo_init);
-/**
- * kfifo_alloc - allocates a new FIFO internal buffer
- * @fifo: the fifo to assign then new buffer
- * @size: the size of the buffer to be allocated, this have to be a power of 2.
- * @gfp_mask: get_free_pages mask, passed to kmalloc()
- *
- * This function dynamically allocates a new fifo internal buffer
- *
- * The size will be rounded-up to a power of 2.
- * The buffer will be release with kfifo_free().
- * Return 0 if no error, otherwise the an error code
- */
-int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask)
+int __kfifo_alloc(struct __kfifo *fifo, unsigned int size,
+ size_t esize, gfp_t gfp_mask)
{
- unsigned char *buffer;
-
/*
- * round up to the next power of 2, since our 'let the indices
+ * round down to the next power of 2, since our 'let the indices
* wrap' technique works only in this case.
*/
- if (!is_power_of_2(size)) {
- BUG_ON(size > 0x80000000);
- size = roundup_pow_of_two(size);
+ if (!is_power_of_2(size))
+ size = rounddown_pow_of_two(size);
+
+ fifo->in = 0;
+ fifo->out = 0;
+ fifo->esize = esize;
+
+ if (size < 2) {
+ fifo->data = NULL;
+ fifo->mask = 0;
+ return -EINVAL;
}
- buffer = kmalloc(size, gfp_mask);
- if (!buffer) {
- _kfifo_init(fifo, NULL, 0);
+ fifo->data = kmalloc(size * esize, gfp_mask);
+
+ if (!fifo->data) {
+ fifo->mask = 0;
return -ENOMEM;
}
-
- _kfifo_init(fifo, buffer, size);
+ fifo->mask = size - 1;
return 0;
}
-EXPORT_SYMBOL(kfifo_alloc);
+EXPORT_SYMBOL(__kfifo_alloc);
-/**
- * kfifo_free - frees the FIFO internal buffer
- * @fifo: the fifo to be freed.
- */
-void kfifo_free(struct kfifo *fifo)
+void __kfifo_free(struct __kfifo *fifo)
{
- kfree(fifo->buffer);
- _kfifo_init(fifo, NULL, 0);
+ kfree(fifo->data);
+ fifo->in = 0;
+ fifo->out = 0;
+ fifo->esize = 0;
+ fifo->data = NULL;
+ fifo->mask = 0;
}
-EXPORT_SYMBOL(kfifo_free);
+EXPORT_SYMBOL(__kfifo_free);
-/**
- * kfifo_skip - skip output data
- * @fifo: the fifo to be used.
- * @len: number of bytes to skip
- */
-void kfifo_skip(struct kfifo *fifo, unsigned int len)
+int __kfifo_init(struct __kfifo *fifo, void *buffer,
+ unsigned int size, size_t esize)
{
- if (len < kfifo_len(fifo)) {
- __kfifo_add_out(fifo, len);
- return;
+ size /= esize;
+
+ if (!is_power_of_2(size))
+ size = rounddown_pow_of_two(size);
+
+ fifo->in = 0;
+ fifo->out = 0;
+ fifo->esize = esize;
+ fifo->data = buffer;
+
+ if (size < 2) {
+ fifo->mask = 0;
+ return -EINVAL;
}
- kfifo_reset_out(fifo);
+ fifo->mask = size - 1;
+
+ return 0;
}
-EXPORT_SYMBOL(kfifo_skip);
+EXPORT_SYMBOL(__kfifo_init);
-static inline void __kfifo_in_data(struct kfifo *fifo,
- const void *from, unsigned int len, unsigned int off)
+static void kfifo_copy_in(struct __kfifo *fifo, const void *src,
+ unsigned int len, unsigned int off)
{
+ unsigned int size = fifo->mask + 1;
+ unsigned int esize = fifo->esize;
unsigned int l;
+ off &= fifo->mask;
+ if (esize != 1) {
+ off *= esize;
+ size *= esize;
+ len *= esize;
+ }
+ l = min(len, size - off);
+
+ memcpy(fifo->data + off, src, l);
+ memcpy(fifo->data, src + l, len - l);
/*
- * Ensure that we sample the fifo->out index -before- we
- * start putting bytes into the kfifo.
+ * make sure that the data in the fifo is up to date before
+ * incrementing the fifo->in index counter
*/
+ smp_wmb();
+}
- smp_mb();
-
- off = __kfifo_off(fifo, fifo->in + off);
+unsigned int __kfifo_in(struct __kfifo *fifo,
+ const void *buf, unsigned int len)
+{
+ unsigned int l;
- /* first put the data starting from fifo->in to buffer end */
- l = min(len, fifo->size - off);
- memcpy(fifo->buffer + off, from, l);
+ l = kfifo_unused(fifo);
+ if (len > l)
+ len = l;
- /* then put the rest (if any) at the beginning of the buffer */
- memcpy(fifo->buffer, from + l, len - l);
+ kfifo_copy_in(fifo, buf, len, fifo->in);
+ fifo->in += len;
+ return len;
}
+EXPORT_SYMBOL(__kfifo_in);
-static inline void __kfifo_out_data(struct kfifo *fifo,
- void *to, unsigned int len, unsigned int off)
+static void kfifo_copy_out(struct __kfifo *fifo, void *dst,
+ unsigned int len, unsigned int off)
{
+ unsigned int size = fifo->mask + 1;
+ unsigned int esize = fifo->esize;
unsigned int l;
+ off &= fifo->mask;
+ if (esize != 1) {
+ off *= esize;
+ size *= esize;
+ len *= esize;
+ }
+ l = min(len, size - off);
+
+ memcpy(dst, fifo->data + off, l);
+ memcpy(dst + l, fifo->data, len - l);
/*
- * Ensure that we sample the fifo->in index -before- we
- * start removing bytes from the kfifo.
+ * make sure that the data is copied before
+ * incrementing the fifo->out index counter
*/
+ smp_wmb();
+}
- smp_rmb();
+unsigned int __kfifo_out_peek(struct __kfifo *fifo,
+ void *buf, unsigned int len)
+{
+ unsigned int l;
- off = __kfifo_off(fifo, fifo->out + off);
+ l = fifo->in - fifo->out;
+ if (len > l)
+ len = l;
- /* first get the data from fifo->out until the end of the buffer */
- l = min(len, fifo->size - off);
- memcpy(to, fifo->buffer + off, l);
+ kfifo_copy_out(fifo, buf, len, fifo->out);
+ return len;
+}
+EXPORT_SYMBOL(__kfifo_out_peek);
- /* then get the rest (if any) from the beginning of the buffer */
- memcpy(to + l, fifo->buffer, len - l);
+unsigned int __kfifo_out(struct __kfifo *fifo,
+ void *buf, unsigned int len)
+{
+ len = __kfifo_out_peek(fifo, buf, len);
+ fifo->out += len;
+ return len;
}
+EXPORT_SYMBOL(__kfifo_out);
-static inline int __kfifo_from_user_data(struct kfifo *fifo,
- const void __user *from, unsigned int len, unsigned int off,
- unsigned *lenout)
+static unsigned long kfifo_copy_from_user(struct __kfifo *fifo,
+ const void __user *from, unsigned int len, unsigned int off,
+ unsigned int *copied)
{
+ unsigned int size = fifo->mask + 1;
+ unsigned int esize = fifo->esize;
unsigned int l;
- int ret;
+ unsigned long ret;
+ off &= fifo->mask;
+ if (esize != 1) {
+ off *= esize;
+ size *= esize;
+ len *= esize;
+ }
+ l = min(len, size - off);
+
+ ret = copy_from_user(fifo->data + off, from, l);
+ if (unlikely(ret))
+ ret = DIV_ROUND_UP(ret + len - l, esize);
+ else {
+ ret = copy_from_user(fifo->data, from + l, len - l);
+ if (unlikely(ret))
+ ret = DIV_ROUND_UP(ret, esize);
+ }
/*
- * Ensure that we sample the fifo->out index -before- we
- * start putting bytes into the kfifo.
+ * make sure that the data in the fifo is up to date before
+ * incrementing the fifo->in index counter
*/
+ smp_wmb();
+ *copied = len - ret;
+ /* return the number of elements which are not copied */
+ return ret;
+}
- smp_mb();
+int __kfifo_from_user(struct __kfifo *fifo, const void __user *from,
+ unsigned long len, unsigned int *copied)
+{
+ unsigned int l;
+ unsigned long ret;
+ unsigned int esize = fifo->esize;
+ int err;
- off = __kfifo_off(fifo, fifo->in + off);
+ if (esize != 1)
+ len /= esize;
- /* first put the data starting from fifo->in to buffer end */
- l = min(len, fifo->size - off);
- ret = copy_from_user(fifo->buffer + off, from, l);
- if (unlikely(ret)) {
- *lenout = ret;
- return -EFAULT;
- }
- *lenout = l;
+ l = kfifo_unused(fifo);
+ if (len > l)
+ len = l;
- /* then put the rest (if any) at the beginning of the buffer */
- ret = copy_from_user(fifo->buffer, from + l, len - l);
- *lenout += ret ? ret : len - l;
- return ret ? -EFAULT : 0;
+ ret = kfifo_copy_from_user(fifo, from, len, fifo->in, copied);
+ if (unlikely(ret)) {
+ len -= ret;
+ err = -EFAULT;
+ } else
+ err = 0;
+ fifo->in += len;
+ return err;
}
+EXPORT_SYMBOL(__kfifo_from_user);
-static inline int __kfifo_to_user_data(struct kfifo *fifo,
- void __user *to, unsigned int len, unsigned int off, unsigned *lenout)
+static unsigned long kfifo_copy_to_user(struct __kfifo *fifo, void __user *to,
+ unsigned int len, unsigned int off, unsigned int *copied)
{
unsigned int l;
- int ret;
-
+ unsigned long ret;
+ unsigned int size = fifo->mask + 1;
+ unsigned int esize = fifo->esize;
+
+ off &= fifo->mask;
+ if (esize != 1) {
+ off *= esize;
+ size *= esize;
+ len *= esize;
+ }
+ l = min(len, size - off);
+
+ ret = copy_to_user(to, fifo->data + off, l);
+ if (unlikely(ret))
+ ret = DIV_ROUND_UP(ret + len - l, esize);
+ else {
+ ret = copy_to_user(to + l, fifo->data, len - l);
+ if (unlikely(ret))
+ ret = DIV_ROUND_UP(ret, esize);
+ }
/*
- * Ensure that we sample the fifo->in index -before- we
- * start removing bytes from the kfifo.
+ * make sure that the data is copied before
+ * incrementing the fifo->out index counter
*/
+ smp_wmb();
+ *copied = len - ret;
+ /* return the number of elements which are not copied */
+ return ret;
+}
- smp_rmb();
+int __kfifo_to_user(struct __kfifo *fifo, void __user *to,
+ unsigned long len, unsigned int *copied)
+{
+ unsigned int l;
+ unsigned long ret;
+ unsigned int esize = fifo->esize;
+ int err;
- off = __kfifo_off(fifo, fifo->out + off);
+ if (esize != 1)
+ len /= esize;
- /* first get the data from fifo->out until the end of the buffer */
- l = min(len, fifo->size - off);
- ret = copy_to_user(to, fifo->buffer + off, l);
- *lenout = l;
+ l = fifo->in - fifo->out;
+ if (len > l)
+ len = l;
+ ret = kfifo_copy_to_user(fifo, to, len, fifo->out, copied);
if (unlikely(ret)) {
- *lenout -= ret;
- return -EFAULT;
- }
+ len -= ret;
+ err = -EFAULT;
+ } else
+ err = 0;
+ fifo->out += len;
+ return err;
+}
+EXPORT_SYMBOL(__kfifo_to_user);
- /* then get the rest (if any) from the beginning of the buffer */
- len -= l;
- ret = copy_to_user(to + l, fifo->buffer, len);
- if (unlikely(ret)) {
- *lenout += len - ret;
- return -EFAULT;
+static int setup_sgl_buf(struct scatterlist *sgl, void *buf,
+ int nents, unsigned int len)
+{
+ int n;
+ unsigned int l;
+ unsigned int off;
+ struct page *page;
+
+ if (!nents)
+ return 0;
+
+ if (!len)
+ return 0;
+
+ n = 0;
+ page = virt_to_page(buf);
+ off = offset_in_page(buf);
+ l = 0;
+
+ while (len >= l + PAGE_SIZE - off) {
+ struct page *npage;
+
+ l += PAGE_SIZE;
+ buf += PAGE_SIZE;
+ npage = virt_to_page(buf);
+ if (page_to_phys(page) != page_to_phys(npage) - l) {
+ sg_set_page(sgl, page, l - off, off);
+ sgl = sg_next(sgl);
+ if (++n == nents || sgl == NULL)
+ return n;
+ page = npage;
+ len -= l - off;
+ l = off = 0;
+ }
}
- *lenout += len;
- return 0;
+ sg_set_page(sgl, page, len, off);
+ return n + 1;
}
-unsigned int __kfifo_in_n(struct kfifo *fifo,
- const void *from, unsigned int len, unsigned int recsize)
+static unsigned int setup_sgl(struct __kfifo *fifo, struct scatterlist *sgl,
+ int nents, unsigned int len, unsigned int off)
{
- if (kfifo_avail(fifo) < len + recsize)
- return len + 1;
+ unsigned int size = fifo->mask + 1;
+ unsigned int esize = fifo->esize;
+ unsigned int l;
+ unsigned int n;
- __kfifo_in_data(fifo, from, len, recsize);
- return 0;
+ off &= fifo->mask;
+ if (esize != 1) {
+ off *= esize;
+ size *= esize;
+ len *= esize;
+ }
+ l = min(len, size - off);
+
+ n = setup_sgl_buf(sgl, fifo->data + off, nents, l);
+ n += setup_sgl_buf(sgl + n, fifo->data, nents - n, len - l);
+
+ if (n)
+ sg_mark_end(sgl + n - 1);
+ return n;
}
-EXPORT_SYMBOL(__kfifo_in_n);
-/**
- * kfifo_in - puts some data into the FIFO
- * @fifo: the fifo to be used.
- * @from: the data to be added.
- * @len: the length of the data to be added.
- *
- * This function copies at most @len bytes from the @from buffer into
- * the FIFO depending on the free space, and returns the number of
- * bytes copied.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these functions.
- */
-unsigned int kfifo_in(struct kfifo *fifo, const void *from,
- unsigned int len)
+unsigned int __kfifo_dma_in_prepare(struct __kfifo *fifo,
+ struct scatterlist *sgl, int nents, unsigned int len)
{
- len = min(kfifo_avail(fifo), len);
+ unsigned int l;
- __kfifo_in_data(fifo, from, len, 0);
- __kfifo_add_in(fifo, len);
- return len;
+ l = kfifo_unused(fifo);
+ if (len > l)
+ len = l;
+
+ return setup_sgl(fifo, sgl, nents, len, fifo->in);
}
-EXPORT_SYMBOL(kfifo_in);
+EXPORT_SYMBOL(__kfifo_dma_in_prepare);
-unsigned int __kfifo_in_generic(struct kfifo *fifo,
- const void *from, unsigned int len, unsigned int recsize)
+unsigned int __kfifo_dma_out_prepare(struct __kfifo *fifo,
+ struct scatterlist *sgl, int nents, unsigned int len)
{
- return __kfifo_in_rec(fifo, from, len, recsize);
+ unsigned int l;
+
+ l = fifo->in - fifo->out;
+ if (len > l)
+ len = l;
+
+ return setup_sgl(fifo, sgl, nents, len, fifo->out);
}
-EXPORT_SYMBOL(__kfifo_in_generic);
+EXPORT_SYMBOL(__kfifo_dma_out_prepare);
-unsigned int __kfifo_out_n(struct kfifo *fifo,
- void *to, unsigned int len, unsigned int recsize)
+unsigned int __kfifo_max_r(unsigned int len, size_t recsize)
{
- if (kfifo_len(fifo) < len + recsize)
- return len;
+ unsigned int max = (1 << (recsize << 3)) - 1;
- __kfifo_out_data(fifo, to, len, recsize);
- __kfifo_add_out(fifo, len + recsize);
- return 0;
+ if (len > max)
+ return max;
+ return len;
}
-EXPORT_SYMBOL(__kfifo_out_n);
-/**
- * kfifo_out - gets some data from the FIFO
- * @fifo: the fifo to be used.
- * @to: where the data must be copied.
- * @len: the size of the destination buffer.
- *
- * This function copies at most @len bytes from the FIFO into the
- * @to buffer and returns the number of copied bytes.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these functions.
+#define __KFIFO_PEEK(data, out, mask) \
+ ((data)[(out) & (mask)])
+/*
+ * __kfifo_peek_n internal helper function for determinate the length of
+ * the next record in the fifo
*/
-unsigned int kfifo_out(struct kfifo *fifo, void *to, unsigned int len)
+static unsigned int __kfifo_peek_n(struct __kfifo *fifo, size_t recsize)
{
- len = min(kfifo_len(fifo), len);
+ unsigned int l;
+ unsigned int mask = fifo->mask;
+ unsigned char *data = fifo->data;
- __kfifo_out_data(fifo, to, len, 0);
- __kfifo_add_out(fifo, len);
+ l = __KFIFO_PEEK(data, fifo->out, mask);
- return len;
+ if (--recsize)
+ l |= __KFIFO_PEEK(data, fifo->out + 1, mask) << 8;
+
+ return l;
}
-EXPORT_SYMBOL(kfifo_out);
-
-/**
- * kfifo_out_peek - copy some data from the FIFO, but do not remove it
- * @fifo: the fifo to be used.
- * @to: where the data must be copied.
- * @len: the size of the destination buffer.
- * @offset: offset into the fifo
- *
- * This function copies at most @len bytes at @offset from the FIFO
- * into the @to buffer and returns the number of copied bytes.
- * The data is not removed from the FIFO.
+
+#define __KFIFO_POKE(data, in, mask, val) \
+ ( \
+ (data)[(in) & (mask)] = (unsigned char)(val) \
+ )
+
+/*
+ * __kfifo_poke_n internal helper function for storeing the length of
+ * the record into the fifo
*/
-unsigned int kfifo_out_peek(struct kfifo *fifo, void *to, unsigned int len,
- unsigned offset)
+static void __kfifo_poke_n(struct __kfifo *fifo, unsigned int n, size_t recsize)
{
- len = min(kfifo_len(fifo), len + offset);
+ unsigned int mask = fifo->mask;
+ unsigned char *data = fifo->data;
- __kfifo_out_data(fifo, to, len, offset);
- return len;
+ __KFIFO_POKE(data, fifo->in, mask, n);
+
+ if (recsize > 1)
+ __KFIFO_POKE(data, fifo->in + 1, mask, n >> 8);
}
-EXPORT_SYMBOL(kfifo_out_peek);
-unsigned int __kfifo_out_generic(struct kfifo *fifo,
- void *to, unsigned int len, unsigned int recsize,
- unsigned int *total)
+unsigned int __kfifo_len_r(struct __kfifo *fifo, size_t recsize)
{
- return __kfifo_out_rec(fifo, to, len, recsize, total);
+ return __kfifo_peek_n(fifo, recsize);
}
-EXPORT_SYMBOL(__kfifo_out_generic);
+EXPORT_SYMBOL(__kfifo_len_r);
-unsigned int __kfifo_from_user_n(struct kfifo *fifo,
- const void __user *from, unsigned int len, unsigned int recsize)
+unsigned int __kfifo_in_r(struct __kfifo *fifo, const void *buf,
+ unsigned int len, size_t recsize)
{
- unsigned total;
+ if (len + recsize > kfifo_unused(fifo))
+ return 0;
- if (kfifo_avail(fifo) < len + recsize)
- return len + 1;
+ __kfifo_poke_n(fifo, len, recsize);
- __kfifo_from_user_data(fifo, from, len, recsize, &total);
- return total;
+ kfifo_copy_in(fifo, buf, len, fifo->in + recsize);
+ fifo->in += len + recsize;
+ return len;
}
-EXPORT_SYMBOL(__kfifo_from_user_n);
-
-/**
- * kfifo_from_user - puts some data from user space into the FIFO
- * @fifo: the fifo to be used.
- * @from: pointer to the data to be added.
- * @len: the length of the data to be added.
- * @total: the actual returned data length.
- *
- * This function copies at most @len bytes from the @from into the
- * FIFO depending and returns -EFAULT/0.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these functions.
- */
-int kfifo_from_user(struct kfifo *fifo,
- const void __user *from, unsigned int len, unsigned *total)
+EXPORT_SYMBOL(__kfifo_in_r);
+
+static unsigned int kfifo_out_copy_r(struct __kfifo *fifo,
+ void *buf, unsigned int len, size_t recsize, unsigned int *n)
{
- int ret;
- len = min(kfifo_avail(fifo), len);
- ret = __kfifo_from_user_data(fifo, from, len, 0, total);
- if (ret)
- return ret;
- __kfifo_add_in(fifo, len);
- return 0;
+ *n = __kfifo_peek_n(fifo, recsize);
+
+ if (len > *n)
+ len = *n;
+
+ kfifo_copy_out(fifo, buf, len, fifo->out + recsize);
+ return len;
+}
+
+unsigned int __kfifo_out_peek_r(struct __kfifo *fifo, void *buf,
+ unsigned int len, size_t recsize)
+{
+ unsigned int n;
+
+ if (fifo->in == fifo->out)
+ return 0;
+
+ return kfifo_out_copy_r(fifo, buf, len, recsize, &n);
}
-EXPORT_SYMBOL(kfifo_from_user);
+EXPORT_SYMBOL(__kfifo_out_peek_r);
-unsigned int __kfifo_from_user_generic(struct kfifo *fifo,
- const void __user *from, unsigned int len, unsigned int recsize)
+unsigned int __kfifo_out_r(struct __kfifo *fifo, void *buf,
+ unsigned int len, size_t recsize)
{
- return __kfifo_from_user_rec(fifo, from, len, recsize);
+ unsigned int n;
+
+ if (fifo->in == fifo->out)
+ return 0;
+
+ len = kfifo_out_copy_r(fifo, buf, len, recsize, &n);
+ fifo->out += n + recsize;
+ return len;
}
-EXPORT_SYMBOL(__kfifo_from_user_generic);
+EXPORT_SYMBOL(__kfifo_out_r);
-unsigned int __kfifo_to_user_n(struct kfifo *fifo,
- void __user *to, unsigned int len, unsigned int reclen,
- unsigned int recsize)
+int __kfifo_from_user_r(struct __kfifo *fifo, const void __user *from,
+ unsigned long len, unsigned int *copied, size_t recsize)
{
- unsigned int ret, total;
+ unsigned long ret;
- if (kfifo_len(fifo) < reclen + recsize)
- return len;
+ len = __kfifo_max_r(len, recsize);
- ret = __kfifo_to_user_data(fifo, to, reclen, recsize, &total);
+ if (len + recsize > kfifo_unused(fifo)) {
+ *copied = 0;
+ return 0;
+ }
- if (likely(ret == 0))
- __kfifo_add_out(fifo, reclen + recsize);
+ __kfifo_poke_n(fifo, len, recsize);
- return total;
+ ret = kfifo_copy_from_user(fifo, from, len, fifo->in + recsize, copied);
+ if (unlikely(ret)) {
+ *copied = 0;
+ return -EFAULT;
+ }
+ fifo->in += len + recsize;
+ return 0;
}
-EXPORT_SYMBOL(__kfifo_to_user_n);
-
-/**
- * kfifo_to_user - gets data from the FIFO and write it to user space
- * @fifo: the fifo to be used.
- * @to: where the data must be copied.
- * @len: the size of the destination buffer.
- * @lenout: pointer to output variable with copied data
- *
- * This function copies at most @len bytes from the FIFO into the
- * @to buffer and 0 or -EFAULT.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these functions.
- */
-int kfifo_to_user(struct kfifo *fifo,
- void __user *to, unsigned int len, unsigned *lenout)
+EXPORT_SYMBOL(__kfifo_from_user_r);
+
+int __kfifo_to_user_r(struct __kfifo *fifo, void __user *to,
+ unsigned long len, unsigned int *copied, size_t recsize)
{
- int ret;
- len = min(kfifo_len(fifo), len);
- ret = __kfifo_to_user_data(fifo, to, len, 0, lenout);
- __kfifo_add_out(fifo, *lenout);
- return ret;
+ unsigned long ret;
+ unsigned int n;
+
+ if (fifo->in == fifo->out) {
+ *copied = 0;
+ return 0;
+ }
+
+ n = __kfifo_peek_n(fifo, recsize);
+ if (len > n)
+ len = n;
+
+ ret = kfifo_copy_to_user(fifo, to, len, fifo->out + recsize, copied);
+ if (unlikely(ret)) {
+ *copied = 0;
+ return -EFAULT;
+ }
+ fifo->out += n + recsize;
+ return 0;
}
-EXPORT_SYMBOL(kfifo_to_user);
+EXPORT_SYMBOL(__kfifo_to_user_r);
-unsigned int __kfifo_to_user_generic(struct kfifo *fifo,
- void __user *to, unsigned int len, unsigned int recsize,
- unsigned int *total)
+unsigned int __kfifo_dma_in_prepare_r(struct __kfifo *fifo,
+ struct scatterlist *sgl, int nents, unsigned int len, size_t recsize)
{
- return __kfifo_to_user_rec(fifo, to, len, recsize, total);
+ if (!nents)
+ BUG();
+
+ len = __kfifo_max_r(len, recsize);
+
+ if (len + recsize > kfifo_unused(fifo))
+ return 0;
+
+ return setup_sgl(fifo, sgl, nents, len, fifo->in + recsize);
}
-EXPORT_SYMBOL(__kfifo_to_user_generic);
+EXPORT_SYMBOL(__kfifo_dma_in_prepare_r);
-unsigned int __kfifo_peek_generic(struct kfifo *fifo, unsigned int recsize)
+void __kfifo_dma_in_finish_r(struct __kfifo *fifo,
+ unsigned int len, size_t recsize)
{
- if (recsize == 0)
- return kfifo_avail(fifo);
-
- return __kfifo_peek_n(fifo, recsize);
+ len = __kfifo_max_r(len, recsize);
+ __kfifo_poke_n(fifo, len, recsize);
+ fifo->in += len + recsize;
}
-EXPORT_SYMBOL(__kfifo_peek_generic);
+EXPORT_SYMBOL(__kfifo_dma_in_finish_r);
-void __kfifo_skip_generic(struct kfifo *fifo, unsigned int recsize)
+unsigned int __kfifo_dma_out_prepare_r(struct __kfifo *fifo,
+ struct scatterlist *sgl, int nents, unsigned int len, size_t recsize)
{
- __kfifo_skip_rec(fifo, recsize);
+ if (!nents)
+ BUG();
+
+ len = __kfifo_max_r(len, recsize);
+
+ if (len + recsize > fifo->in - fifo->out)
+ return 0;
+
+ return setup_sgl(fifo, sgl, nents, len, fifo->out + recsize);
}
-EXPORT_SYMBOL(__kfifo_skip_generic);
+EXPORT_SYMBOL(__kfifo_dma_out_prepare_r);
+
+void __kfifo_dma_out_finish_r(struct __kfifo *fifo, size_t recsize)
+{
+ unsigned int len;
+ len = __kfifo_peek_n(fifo, recsize);
+ fifo->out += len + recsize;
+}
+EXPORT_SYMBOL(__kfifo_dma_out_finish_r);
goto fail;
}
- retval = kernel_execve(sub_info->path, sub_info->argv, sub_info->envp);
+ retval = kernel_execve(sub_info->path,
+ (const char *const *)sub_info->argv,
+ (const char *const *)sub_info->envp);
/* Exec failed? */
fail:
#include <linux/nmi.h>
#include <linux/dmi.h>
+#define PANIC_TIMER_STEP 100
+#define PANIC_BLINK_SPD 18
+
int panic_on_oops;
static unsigned long tainted_mask;
static int pause_on_oops;
EXPORT_SYMBOL(panic_notifier_list);
-/* Returns how long it waited in ms */
-long (*panic_blink)(long time);
-EXPORT_SYMBOL(panic_blink);
-
-static void panic_blink_one_second(void)
+static long no_blink(int state)
{
- static long i = 0, end;
-
- if (panic_blink) {
- end = i + MSEC_PER_SEC;
-
- while (i < end) {
- i += panic_blink(i);
- mdelay(1);
- i++;
- }
- } else {
- /*
- * When running under a hypervisor a small mdelay may get
- * rounded up to the hypervisor timeslice. For example, with
- * a 1ms in 10ms hypervisor timeslice we might inflate a
- * mdelay(1) loop by 10x.
- *
- * If we have nothing to blink, spin on 1 second calls to
- * mdelay to avoid this.
- */
- mdelay(MSEC_PER_SEC);
- }
+ return 0;
}
+/* Returns how long it waited in ms */
+long (*panic_blink)(int state);
+EXPORT_SYMBOL(panic_blink);
+
/**
* panic - halt the system
* @fmt: The text string to print
{
static char buf[1024];
va_list args;
- long i;
+ long i, i_next = 0;
+ int state = 0;
/*
* It's possible to come here directly from a panic-assertion and
bust_spinlocks(0);
+ if (!panic_blink)
+ panic_blink = no_blink;
+
if (panic_timeout > 0) {
/*
* Delay timeout seconds before rebooting the machine.
*/
printk(KERN_EMERG "Rebooting in %d seconds..", panic_timeout);
- for (i = 0; i < panic_timeout; i++) {
+ for (i = 0; i < panic_timeout * 1000; i += PANIC_TIMER_STEP) {
touch_nmi_watchdog();
- panic_blink_one_second();
+ if (i >= i_next) {
+ i += panic_blink(state ^= 1);
+ i_next = i + 3600 / PANIC_BLINK_SPD;
+ }
+ mdelay(PANIC_TIMER_STEP);
}
/*
* This will not be a clean reboot, with everything
}
#endif
local_irq_enable();
- while (1) {
+ for (i = 0; ; i += PANIC_TIMER_STEP) {
touch_softlockup_watchdog();
- panic_blink_one_second();
+ if (i >= i_next) {
+ i += panic_blink(state ^= 1);
+ i_next = i + 3600 / PANIC_BLINK_SPD;
+ }
+ mdelay(PANIC_TIMER_STEP);
}
}
}
late_initcall(init_oops_id);
-static void print_oops_end_marker(void)
+void print_oops_end_marker(void)
{
init_oops_id();
printk(KERN_WARNING "---[ end trace %016llx ]---\n",
#define DEBUGP(fmt, a...)
#endif
+/* Protects all parameters, and incidentally kmalloced_param list. */
+static DEFINE_MUTEX(param_lock);
+
+/* This just allows us to keep track of which parameters are kmalloced. */
+struct kmalloced_param {
+ struct list_head list;
+ char val[];
+};
+static LIST_HEAD(kmalloced_params);
+
+static void *kmalloc_parameter(unsigned int size)
+{
+ struct kmalloced_param *p;
+
+ p = kmalloc(sizeof(*p) + size, GFP_KERNEL);
+ if (!p)
+ return NULL;
+
+ list_add(&p->list, &kmalloced_params);
+ return p->val;
+}
+
+/* Does nothing if parameter wasn't kmalloced above. */
+static void maybe_kfree_parameter(void *param)
+{
+ struct kmalloced_param *p;
+
+ list_for_each_entry(p, &kmalloced_params, list) {
+ if (p->val == param) {
+ list_del(&p->list);
+ kfree(p);
+ break;
+ }
+ }
+}
+
static inline char dash2underscore(char c)
{
if (c == '-')
static int parse_one(char *param,
char *val,
- struct kernel_param *params,
+ const struct kernel_param *params,
unsigned num_params,
int (*handle_unknown)(char *param, char *val))
{
unsigned int i;
+ int err;
/* Find parameter */
for (i = 0; i < num_params; i++) {
if (parameq(param, params[i].name)) {
+ /* Noone handled NULL, so do it here. */
+ if (!val && params[i].ops->set != param_set_bool)
+ return -EINVAL;
DEBUGP("They are equal! Calling %p\n",
- params[i].set);
- return params[i].set(val, ¶ms[i]);
+ params[i].ops->set);
+ mutex_lock(¶m_lock);
+ err = params[i].ops->set(val, ¶ms[i]);
+ mutex_unlock(¶m_lock);
+ return err;
}
}
/* Args looks like "foo=bar,bar2 baz=fuz wiz". */
int parse_args(const char *name,
char *args,
- struct kernel_param *params,
+ const struct kernel_param *params,
unsigned num,
int (*unknown)(char *param, char *val))
{
/* Lazy bastard, eh? */
#define STANDARD_PARAM_DEF(name, type, format, tmptype, strtolfn) \
- int param_set_##name(const char *val, struct kernel_param *kp) \
+ int param_set_##name(const char *val, const struct kernel_param *kp) \
{ \
tmptype l; \
int ret; \
\
- if (!val) return -EINVAL; \
ret = strtolfn(val, 0, &l); \
if (ret == -EINVAL || ((type)l != l)) \
return -EINVAL; \
*((type *)kp->arg) = l; \
return 0; \
} \
- int param_get_##name(char *buffer, struct kernel_param *kp) \
+ int param_get_##name(char *buffer, const struct kernel_param *kp) \
{ \
return sprintf(buffer, format, *((type *)kp->arg)); \
- }
+ } \
+ struct kernel_param_ops param_ops_##name = { \
+ .set = param_set_##name, \
+ .get = param_get_##name, \
+ }; \
+ EXPORT_SYMBOL(param_set_##name); \
+ EXPORT_SYMBOL(param_get_##name); \
+ EXPORT_SYMBOL(param_ops_##name)
+
STANDARD_PARAM_DEF(byte, unsigned char, "%c", unsigned long, strict_strtoul);
STANDARD_PARAM_DEF(short, short, "%hi", long, strict_strtol);
STANDARD_PARAM_DEF(long, long, "%li", long, strict_strtol);
STANDARD_PARAM_DEF(ulong, unsigned long, "%lu", unsigned long, strict_strtoul);
-int param_set_charp(const char *val, struct kernel_param *kp)
+int param_set_charp(const char *val, const struct kernel_param *kp)
{
- if (!val) {
- printk(KERN_ERR "%s: string parameter expected\n",
- kp->name);
- return -EINVAL;
- }
-
if (strlen(val) > 1024) {
printk(KERN_ERR "%s: string parameter too long\n",
kp->name);
return -ENOSPC;
}
- /* This is a hack. We can't need to strdup in early boot, and we
+ maybe_kfree_parameter(*(char **)kp->arg);
+
+ /* This is a hack. We can't kmalloc in early boot, and we
* don't need to; this mangled commandline is preserved. */
if (slab_is_available()) {
- *(char **)kp->arg = kstrdup(val, GFP_KERNEL);
+ *(char **)kp->arg = kmalloc_parameter(strlen(val)+1);
if (!*(char **)kp->arg)
return -ENOMEM;
+ strcpy(*(char **)kp->arg, val);
} else
*(const char **)kp->arg = val;
return 0;
}
+EXPORT_SYMBOL(param_set_charp);
-int param_get_charp(char *buffer, struct kernel_param *kp)
+int param_get_charp(char *buffer, const struct kernel_param *kp)
{
return sprintf(buffer, "%s", *((char **)kp->arg));
}
+EXPORT_SYMBOL(param_get_charp);
+
+static void param_free_charp(void *arg)
+{
+ maybe_kfree_parameter(*((char **)arg));
+}
+
+struct kernel_param_ops param_ops_charp = {
+ .set = param_set_charp,
+ .get = param_get_charp,
+ .free = param_free_charp,
+};
+EXPORT_SYMBOL(param_ops_charp);
/* Actually could be a bool or an int, for historical reasons. */
-int param_set_bool(const char *val, struct kernel_param *kp)
+int param_set_bool(const char *val, const struct kernel_param *kp)
{
bool v;
*(int *)kp->arg = v;
return 0;
}
+EXPORT_SYMBOL(param_set_bool);
-int param_get_bool(char *buffer, struct kernel_param *kp)
+int param_get_bool(char *buffer, const struct kernel_param *kp)
{
bool val;
if (kp->flags & KPARAM_ISBOOL)
/* Y and N chosen as being relatively non-coder friendly */
return sprintf(buffer, "%c", val ? 'Y' : 'N');
}
+EXPORT_SYMBOL(param_get_bool);
+
+struct kernel_param_ops param_ops_bool = {
+ .set = param_set_bool,
+ .get = param_get_bool,
+};
+EXPORT_SYMBOL(param_ops_bool);
/* This one must be bool. */
-int param_set_invbool(const char *val, struct kernel_param *kp)
+int param_set_invbool(const char *val, const struct kernel_param *kp)
{
int ret;
bool boolval;
*(bool *)kp->arg = !boolval;
return ret;
}
+EXPORT_SYMBOL(param_set_invbool);
-int param_get_invbool(char *buffer, struct kernel_param *kp)
+int param_get_invbool(char *buffer, const struct kernel_param *kp)
{
return sprintf(buffer, "%c", (*(bool *)kp->arg) ? 'N' : 'Y');
}
+EXPORT_SYMBOL(param_get_invbool);
+
+struct kernel_param_ops param_ops_invbool = {
+ .set = param_set_invbool,
+ .get = param_get_invbool,
+};
+EXPORT_SYMBOL(param_ops_invbool);
/* We break the rule and mangle the string. */
static int param_array(const char *name,
const char *val,
unsigned int min, unsigned int max,
void *elem, int elemsize,
- int (*set)(const char *, struct kernel_param *kp),
+ int (*set)(const char *, const struct kernel_param *kp),
u16 flags,
unsigned int *num)
{
kp.arg = elem;
kp.flags = flags;
- /* No equals sign? */
- if (!val) {
- printk(KERN_ERR "%s: expects arguments\n", name);
- return -EINVAL;
- }
-
*num = 0;
/* We expect a comma-separated list of values. */
do {
/* nul-terminate and parse */
save = val[len];
((char *)val)[len] = '\0';
+ BUG_ON(!mutex_is_locked(¶m_lock));
ret = set(val, &kp);
if (ret != 0)
return 0;
}
-int param_array_set(const char *val, struct kernel_param *kp)
+static int param_array_set(const char *val, const struct kernel_param *kp)
{
const struct kparam_array *arr = kp->arr;
unsigned int temp_num;
return param_array(kp->name, val, 1, arr->max, arr->elem,
- arr->elemsize, arr->set, kp->flags,
+ arr->elemsize, arr->ops->set, kp->flags,
arr->num ?: &temp_num);
}
-int param_array_get(char *buffer, struct kernel_param *kp)
+static int param_array_get(char *buffer, const struct kernel_param *kp)
{
int i, off, ret;
const struct kparam_array *arr = kp->arr;
if (i)
buffer[off++] = ',';
p.arg = arr->elem + arr->elemsize * i;
- ret = arr->get(buffer + off, &p);
+ BUG_ON(!mutex_is_locked(¶m_lock));
+ ret = arr->ops->get(buffer + off, &p);
if (ret < 0)
return ret;
off += ret;
return off;
}
-int param_set_copystring(const char *val, struct kernel_param *kp)
+static void param_array_free(void *arg)
+{
+ unsigned int i;
+ const struct kparam_array *arr = arg;
+
+ if (arr->ops->free)
+ for (i = 0; i < (arr->num ? *arr->num : arr->max); i++)
+ arr->ops->free(arr->elem + arr->elemsize * i);
+}
+
+struct kernel_param_ops param_array_ops = {
+ .set = param_array_set,
+ .get = param_array_get,
+ .free = param_array_free,
+};
+EXPORT_SYMBOL(param_array_ops);
+
+int param_set_copystring(const char *val, const struct kernel_param *kp)
{
const struct kparam_string *kps = kp->str;
- if (!val) {
- printk(KERN_ERR "%s: missing param set value\n", kp->name);
- return -EINVAL;
- }
if (strlen(val)+1 > kps->maxlen) {
printk(KERN_ERR "%s: string doesn't fit in %u chars.\n",
kp->name, kps->maxlen-1);
strcpy(kps->string, val);
return 0;
}
+EXPORT_SYMBOL(param_set_copystring);
-int param_get_string(char *buffer, struct kernel_param *kp)
+int param_get_string(char *buffer, const struct kernel_param *kp)
{
const struct kparam_string *kps = kp->str;
return strlcpy(buffer, kps->string, kps->maxlen);
}
+EXPORT_SYMBOL(param_get_string);
+
+struct kernel_param_ops param_ops_string = {
+ .set = param_set_copystring,
+ .get = param_get_string,
+};
+EXPORT_SYMBOL(param_ops_string);
/* sysfs output in /sys/modules/XYZ/parameters/ */
#define to_module_attr(n) container_of(n, struct module_attribute, attr)
struct param_attribute
{
struct module_attribute mattr;
- struct kernel_param *param;
+ const struct kernel_param *param;
};
struct module_param_attrs
int count;
struct param_attribute *attribute = to_param_attr(mattr);
- if (!attribute->param->get)
+ if (!attribute->param->ops->get)
return -EPERM;
- count = attribute->param->get(buf, attribute->param);
+ mutex_lock(¶m_lock);
+ count = attribute->param->ops->get(buf, attribute->param);
+ mutex_unlock(¶m_lock);
if (count > 0) {
strcat(buf, "\n");
++count;
int err;
struct param_attribute *attribute = to_param_attr(mattr);
- if (!attribute->param->set)
+ if (!attribute->param->ops->set)
return -EPERM;
- err = attribute->param->set(buf, attribute->param);
+ mutex_lock(¶m_lock);
+ err = attribute->param->ops->set(buf, attribute->param);
+ mutex_unlock(¶m_lock);
if (!err)
return len;
return err;
#endif
#ifdef CONFIG_SYSFS
+void __kernel_param_lock(void)
+{
+ mutex_lock(¶m_lock);
+}
+EXPORT_SYMBOL(__kernel_param_lock);
+
+void __kernel_param_unlock(void)
+{
+ mutex_unlock(¶m_lock);
+}
+EXPORT_SYMBOL(__kernel_param_unlock);
+
/*
* add_sysfs_param - add a parameter to sysfs
* @mk: struct module_kobject
* if there's an error.
*/
static __modinit int add_sysfs_param(struct module_kobject *mk,
- struct kernel_param *kp,
+ const struct kernel_param *kp,
const char *name)
{
struct module_param_attrs *new;
* /sys/module/[mod->name]/parameters/
*/
int module_param_sysfs_setup(struct module *mod,
- struct kernel_param *kparam,
+ const struct kernel_param *kparam,
unsigned int num_params)
{
int i, err;
void destroy_params(const struct kernel_param *params, unsigned num)
{
- /* FIXME: This should free kmalloced charp parameters. It doesn't. */
+ unsigned int i;
+
+ for (i = 0; i < num; i++)
+ if (params[i].ops->free)
+ params[i].ops->free(params[i].arg);
}
static void __init kernel_add_sysfs_param(const char *name,
subsys_initcall(param_sysfs_init);
#endif /* CONFIG_SYSFS */
-
-EXPORT_SYMBOL(param_set_byte);
-EXPORT_SYMBOL(param_get_byte);
-EXPORT_SYMBOL(param_set_short);
-EXPORT_SYMBOL(param_get_short);
-EXPORT_SYMBOL(param_set_ushort);
-EXPORT_SYMBOL(param_get_ushort);
-EXPORT_SYMBOL(param_set_int);
-EXPORT_SYMBOL(param_get_int);
-EXPORT_SYMBOL(param_set_uint);
-EXPORT_SYMBOL(param_get_uint);
-EXPORT_SYMBOL(param_set_long);
-EXPORT_SYMBOL(param_get_long);
-EXPORT_SYMBOL(param_set_ulong);
-EXPORT_SYMBOL(param_get_ulong);
-EXPORT_SYMBOL(param_set_charp);
-EXPORT_SYMBOL(param_get_charp);
-EXPORT_SYMBOL(param_set_bool);
-EXPORT_SYMBOL(param_get_bool);
-EXPORT_SYMBOL(param_set_invbool);
-EXPORT_SYMBOL(param_get_invbool);
-EXPORT_SYMBOL(param_array_set);
-EXPORT_SYMBOL(param_array_get);
-EXPORT_SYMBOL(param_set_copystring);
-EXPORT_SYMBOL(param_get_string);
atomic_inc(&map->nr_free);
}
+/*
+ * If we started walking pids at 'base', is 'a' seen before 'b'?
+ */
+static int pid_before(int base, int a, int b)
+{
+ /*
+ * This is the same as saying
+ *
+ * (a - base + MAXUINT) % MAXUINT < (b - base + MAXUINT) % MAXUINT
+ * and that mapping orders 'a' and 'b' with respect to 'base'.
+ */
+ return (unsigned)(a - base) < (unsigned)(b - base);
+}
+
+/*
+ * We might be racing with someone else trying to set pid_ns->last_pid.
+ * We want the winner to have the "later" value, because if the
+ * "earlier" value prevails, then a pid may get reused immediately.
+ *
+ * Since pids rollover, it is not sufficient to just pick the bigger
+ * value. We have to consider where we started counting from.
+ *
+ * 'base' is the value of pid_ns->last_pid that we observed when
+ * we started looking for a pid.
+ *
+ * 'pid' is the pid that we eventually found.
+ */
+static void set_last_pid(struct pid_namespace *pid_ns, int base, int pid)
+{
+ int prev;
+ int last_write = base;
+ do {
+ prev = last_write;
+ last_write = cmpxchg(&pid_ns->last_pid, prev, pid);
+ } while ((prev != last_write) && (pid_before(base, last_write, pid)));
+}
+
static int alloc_pidmap(struct pid_namespace *pid_ns)
{
int i, offset, max_scan, pid, last = pid_ns->last_pid;
pid = RESERVED_PIDS;
offset = pid & BITS_PER_PAGE_MASK;
map = &pid_ns->pidmap[pid/BITS_PER_PAGE];
- max_scan = (pid_max + BITS_PER_PAGE - 1)/BITS_PER_PAGE - !offset;
+ /*
+ * If last_pid points into the middle of the map->page we
+ * want to scan this bitmap block twice, the second time
+ * we start with offset == 0 (or RESERVED_PIDS).
+ */
+ max_scan = DIV_ROUND_UP(pid_max, BITS_PER_PAGE) - !offset;
for (i = 0; i <= max_scan; ++i) {
if (unlikely(!map->page)) {
void *page = kzalloc(PAGE_SIZE, GFP_KERNEL);
do {
if (!test_and_set_bit(offset, map->page)) {
atomic_dec(&map->nr_free);
- pid_ns->last_pid = pid;
+ set_last_pid(pid_ns, last, pid);
return pid;
}
offset = find_next_offset(map, offset);
pid = mk_pid(pid_ns, map, offset);
- /*
- * find_next_offset() found a bit, the pid from it
- * is in-bounds, and if we fell back to the last
- * bitmap block and the final block was the same
- * as the starting point, pid is before last_pid.
- */
- } while (offset < BITS_PER_PAGE && pid < pid_max &&
- (i != max_scan || pid < last ||
- !((last+1) & BITS_PER_PAGE_MASK)));
+ } while (offset < BITS_PER_PAGE && pid < pid_max);
}
if (map < &pid_ns->pidmap[(pid_max-1)/BITS_PER_PAGE]) {
++map;
* siglock protection since other code may update expiration cache as
* well.
*/
-void update_rlimit_cpu(unsigned long rlim_new)
+void update_rlimit_cpu(struct task_struct *task, unsigned long rlim_new)
{
cputime_t cputime = secs_to_cputime(rlim_new);
- spin_lock_irq(¤t->sighand->siglock);
- set_process_cpu_timer(current, CPUCLOCK_PROF, &cputime, NULL);
- spin_unlock_irq(¤t->sighand->siglock);
+ spin_lock_irq(&task->sighand->siglock);
+ set_process_cpu_timer(task, CPUCLOCK_PROF, &cputime, NULL);
+ spin_unlock_irq(&task->sighand->siglock);
}
static int check_clock(const clockid_t which_clock)
static int submit(int rw, struct block_device *bdev, sector_t sector,
struct page *page, struct bio **bio_chain)
{
- const int bio_rw = rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
+ const int bio_rw = rw | REQ_SYNC | REQ_UNPLUG;
struct bio *bio;
bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1);
}
/*
- * Detach all tasks we were using ptrace on.
+ * Detach all tasks we were using ptrace on. Called with tasklist held
+ * for writing, and returns with it held too. But note it can release
+ * and reacquire the lock.
*/
void exit_ptrace(struct task_struct *tracer)
{
struct task_struct *p, *n;
LIST_HEAD(ptrace_dead);
- write_lock_irq(&tasklist_lock);
+ if (likely(list_empty(&tracer->ptraced)))
+ return;
+
list_for_each_entry_safe(p, n, &tracer->ptraced, ptrace_entry) {
if (__ptrace_detach(tracer, p))
list_add(&p->ptrace_entry, &ptrace_dead);
}
- write_unlock_irq(&tasklist_lock);
+ write_unlock_irq(&tasklist_lock);
BUG_ON(!list_empty(&tracer->ptraced));
list_for_each_entry_safe(p, n, &ptrace_dead, ptrace_entry) {
list_del_init(&p->ptrace_entry);
release_task(p);
}
+
+ write_lock_irq(&tasklist_lock);
}
int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len)
SYSCALL_DEFINE2(getrlimit, unsigned int, resource, struct rlimit __user *, rlim)
{
- if (resource >= RLIM_NLIMITS)
- return -EINVAL;
- else {
- struct rlimit value;
- task_lock(current->group_leader);
- value = current->signal->rlim[resource];
- task_unlock(current->group_leader);
- return copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
- }
+ struct rlimit value;
+ int ret;
+
+ ret = do_prlimit(current, resource, NULL, &value);
+ if (!ret)
+ ret = copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
+
+ return ret;
}
#ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT
#endif
-SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
+static inline bool rlim64_is_infinity(__u64 rlim64)
{
- struct rlimit new_rlim, *old_rlim;
- int retval;
+#if BITS_PER_LONG < 64
+ return rlim64 >= ULONG_MAX;
+#else
+ return rlim64 == RLIM64_INFINITY;
+#endif
+}
+
+static void rlim_to_rlim64(const struct rlimit *rlim, struct rlimit64 *rlim64)
+{
+ if (rlim->rlim_cur == RLIM_INFINITY)
+ rlim64->rlim_cur = RLIM64_INFINITY;
+ else
+ rlim64->rlim_cur = rlim->rlim_cur;
+ if (rlim->rlim_max == RLIM_INFINITY)
+ rlim64->rlim_max = RLIM64_INFINITY;
+ else
+ rlim64->rlim_max = rlim->rlim_max;
+}
+
+static void rlim64_to_rlim(const struct rlimit64 *rlim64, struct rlimit *rlim)
+{
+ if (rlim64_is_infinity(rlim64->rlim_cur))
+ rlim->rlim_cur = RLIM_INFINITY;
+ else
+ rlim->rlim_cur = (unsigned long)rlim64->rlim_cur;
+ if (rlim64_is_infinity(rlim64->rlim_max))
+ rlim->rlim_max = RLIM_INFINITY;
+ else
+ rlim->rlim_max = (unsigned long)rlim64->rlim_max;
+}
+
+/* make sure you are allowed to change @tsk limits before calling this */
+int do_prlimit(struct task_struct *tsk, unsigned int resource,
+ struct rlimit *new_rlim, struct rlimit *old_rlim)
+{
+ struct rlimit *rlim;
+ int retval = 0;
if (resource >= RLIM_NLIMITS)
return -EINVAL;
- if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
- return -EFAULT;
- if (new_rlim.rlim_cur > new_rlim.rlim_max)
- return -EINVAL;
- old_rlim = current->signal->rlim + resource;
- if ((new_rlim.rlim_max > old_rlim->rlim_max) &&
- !capable(CAP_SYS_RESOURCE))
- return -EPERM;
- if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > sysctl_nr_open)
- return -EPERM;
-
- retval = security_task_setrlimit(resource, &new_rlim);
- if (retval)
- return retval;
-
- if (resource == RLIMIT_CPU && new_rlim.rlim_cur == 0) {
- /*
- * The caller is asking for an immediate RLIMIT_CPU
- * expiry. But we use the zero value to mean "it was
- * never set". So let's cheat and make it one second
- * instead
- */
- new_rlim.rlim_cur = 1;
+ if (new_rlim) {
+ if (new_rlim->rlim_cur > new_rlim->rlim_max)
+ return -EINVAL;
+ if (resource == RLIMIT_NOFILE &&
+ new_rlim->rlim_max > sysctl_nr_open)
+ return -EPERM;
}
- task_lock(current->group_leader);
- *old_rlim = new_rlim;
- task_unlock(current->group_leader);
-
- if (resource != RLIMIT_CPU)
+ /* protect tsk->signal and tsk->sighand from disappearing */
+ read_lock(&tasklist_lock);
+ if (!tsk->sighand) {
+ retval = -ESRCH;
goto out;
+ }
+
+ rlim = tsk->signal->rlim + resource;
+ task_lock(tsk->group_leader);
+ if (new_rlim) {
+ if (new_rlim->rlim_max > rlim->rlim_max &&
+ !capable(CAP_SYS_RESOURCE))
+ retval = -EPERM;
+ if (!retval)
+ retval = security_task_setrlimit(tsk->group_leader,
+ resource, new_rlim);
+ if (resource == RLIMIT_CPU && new_rlim->rlim_cur == 0) {
+ /*
+ * The caller is asking for an immediate RLIMIT_CPU
+ * expiry. But we use the zero value to mean "it was
+ * never set". So let's cheat and make it one second
+ * instead
+ */
+ new_rlim->rlim_cur = 1;
+ }
+ }
+ if (!retval) {
+ if (old_rlim)
+ *old_rlim = *rlim;
+ if (new_rlim)
+ *rlim = *new_rlim;
+ }
+ task_unlock(tsk->group_leader);
/*
* RLIMIT_CPU handling. Note that the kernel fails to return an error
* very long-standing error, and fixing it now risks breakage of
* applications, so we live with it
*/
- if (new_rlim.rlim_cur == RLIM_INFINITY)
- goto out;
-
- update_rlimit_cpu(new_rlim.rlim_cur);
+ if (!retval && new_rlim && resource == RLIMIT_CPU &&
+ new_rlim->rlim_cur != RLIM_INFINITY)
+ update_rlimit_cpu(tsk, new_rlim->rlim_cur);
out:
+ read_unlock(&tasklist_lock);
+ return retval;
+}
+
+/* rcu lock must be held */
+static int check_prlimit_permission(struct task_struct *task)
+{
+ const struct cred *cred = current_cred(), *tcred;
+
+ tcred = __task_cred(task);
+ if ((cred->uid != tcred->euid ||
+ cred->uid != tcred->suid ||
+ cred->uid != tcred->uid ||
+ cred->gid != tcred->egid ||
+ cred->gid != tcred->sgid ||
+ cred->gid != tcred->gid) &&
+ !capable(CAP_SYS_RESOURCE)) {
+ return -EPERM;
+ }
+
return 0;
}
+SYSCALL_DEFINE4(prlimit64, pid_t, pid, unsigned int, resource,
+ const struct rlimit64 __user *, new_rlim,
+ struct rlimit64 __user *, old_rlim)
+{
+ struct rlimit64 old64, new64;
+ struct rlimit old, new;
+ struct task_struct *tsk;
+ int ret;
+
+ if (new_rlim) {
+ if (copy_from_user(&new64, new_rlim, sizeof(new64)))
+ return -EFAULT;
+ rlim64_to_rlim(&new64, &new);
+ }
+
+ rcu_read_lock();
+ tsk = pid ? find_task_by_vpid(pid) : current;
+ if (!tsk) {
+ rcu_read_unlock();
+ return -ESRCH;
+ }
+ ret = check_prlimit_permission(tsk);
+ if (ret) {
+ rcu_read_unlock();
+ return ret;
+ }
+ get_task_struct(tsk);
+ rcu_read_unlock();
+
+ ret = do_prlimit(tsk, resource, new_rlim ? &new : NULL,
+ old_rlim ? &old : NULL);
+
+ if (!ret && old_rlim) {
+ rlim_to_rlim64(&old, &old64);
+ if (copy_to_user(old_rlim, &old64, sizeof(old64)))
+ ret = -EFAULT;
+ }
+
+ put_task_struct(tsk);
+ return ret;
+}
+
+SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
+{
+ struct rlimit new_rlim;
+
+ if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
+ return -EFAULT;
+ return do_prlimit(current, resource, &new_rlim, NULL);
+}
+
/*
* It would make sense to put struct rusage in the task_struct,
* except that would make the task_struct be *really big*. After
/* performance counters: */
cond_syscall(sys_perf_event_open);
+
+/* fanotify! */
+cond_syscall(sys_fanotify_init);
+cond_syscall(sys_fanotify_mark);
#include <linux/times.h>
#include <linux/limits.h>
#include <linux/dcache.h>
+#include <linux/dnotify.h>
#include <linux/syscalls.h>
#include <linux/vmstat.h>
#include <linux/nfs_fs.h>
static int ngroups_max = NGROUPS_MAX;
+#ifdef CONFIG_INOTIFY_USER
+#include <linux/inotify.h>
+#endif
#ifdef CONFIG_SPARC
#include <asm/system.h>
#endif
static struct ctl_table debug_table[];
static struct ctl_table dev_table[];
extern struct ctl_table random_table[];
-#ifdef CONFIG_INOTIFY_USER
-extern struct ctl_table inotify_table[];
-#endif
#ifdef CONFIG_EPOLL
extern struct ctl_table epoll_table[];
#endif
static cycle_t logarithmic_accumulation(cycle_t offset, int shift)
{
u64 nsecps = (u64)NSEC_PER_SEC << timekeeper.shift;
+ u64 raw_nsecs;
/* If the offset is smaller then a shifted interval, do nothing */
if (offset < timekeeper.cycle_interval<<shift)
second_overflow();
}
- /* Accumulate into raw time */
- raw_time.tv_nsec += timekeeper.raw_interval << shift;;
- while (raw_time.tv_nsec >= NSEC_PER_SEC) {
- raw_time.tv_nsec -= NSEC_PER_SEC;
- raw_time.tv_sec++;
+ /* Accumulate raw time */
+ raw_nsecs = timekeeper.raw_interval << shift;
+ raw_nsecs += raw_time.tv_nsec;
+ if (raw_nsecs >= NSEC_PER_SEC) {
+ u64 raw_secs = raw_nsecs;
+ raw_nsecs = do_div(raw_secs, NSEC_PER_SEC);
+ raw_time.tv_sec += raw_secs;
}
+ raw_time.tv_nsec = raw_nsecs;
/* Accumulate error between NTP and clock interval */
timekeeper.ntp_error += tick_length << shift;
/**
* set_timer_slack - set the allowed slack for a timer
+ * @timer: the timer to be modified
* @slack_hz: the amount of time (in jiffies) allowed for rounding
*
* Set the amount of time, in jiffies, that a certain timer has
static const u32 ddir_act[2] = { BLK_TC_ACT(BLK_TC_READ),
BLK_TC_ACT(BLK_TC_WRITE) };
+#define BLK_TC_HARDBARRIER BLK_TC_BARRIER
+#define BLK_TC_RAHEAD BLK_TC_AHEAD
+
/* The ilog2() calls fall out because they're constant */
-#define MASK_TC_BIT(rw, __name) ((rw & (1 << BIO_RW_ ## __name)) << \
- (ilog2(BLK_TC_ ## __name) + BLK_TC_SHIFT - BIO_RW_ ## __name))
+#define MASK_TC_BIT(rw, __name) ((rw & REQ_ ## __name) << \
+ (ilog2(BLK_TC_ ## __name) + BLK_TC_SHIFT - __REQ_ ## __name))
/*
* The worker for the various blk_add_trace*() types. Fills out a
return;
what |= ddir_act[rw & WRITE];
- what |= MASK_TC_BIT(rw, BARRIER);
- what |= MASK_TC_BIT(rw, SYNCIO);
- what |= MASK_TC_BIT(rw, AHEAD);
+ what |= MASK_TC_BIT(rw, HARDBARRIER);
+ what |= MASK_TC_BIT(rw, SYNC);
+ what |= MASK_TC_BIT(rw, RAHEAD);
what |= MASK_TC_BIT(rw, META);
what |= MASK_TC_BIT(rw, DISCARD);
}
EXPORT_SYMBOL_GPL(blk_trace_setup);
+#if defined(CONFIG_COMPAT) && defined(CONFIG_X86_64)
+static int compat_blk_trace_setup(struct request_queue *q, char *name,
+ dev_t dev, struct block_device *bdev,
+ char __user *arg)
+{
+ struct blk_user_trace_setup buts;
+ struct compat_blk_user_trace_setup cbuts;
+ int ret;
+
+ if (copy_from_user(&cbuts, arg, sizeof(cbuts)))
+ return -EFAULT;
+
+ buts = (struct blk_user_trace_setup) {
+ .act_mask = cbuts.act_mask,
+ .buf_size = cbuts.buf_size,
+ .buf_nr = cbuts.buf_nr,
+ .start_lba = cbuts.start_lba,
+ .end_lba = cbuts.end_lba,
+ .pid = cbuts.pid,
+ };
+ memcpy(&buts.name, &cbuts.name, 32);
+
+ ret = do_blk_trace_setup(q, name, dev, bdev, &buts);
+ if (ret)
+ return ret;
+
+ if (copy_to_user(arg, &buts.name, 32)) {
+ blk_trace_remove(q);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+#endif
+
int blk_trace_startstop(struct request_queue *q, int start)
{
int ret;
if (!q)
return -ENXIO;
+ lock_kernel();
mutex_lock(&bdev->bd_mutex);
switch (cmd) {
bdevname(bdev, b);
ret = blk_trace_setup(q, b, bdev->bd_dev, bdev, arg);
break;
+#if defined(CONFIG_COMPAT) && defined(CONFIG_X86_64)
+ case BLKTRACESETUP32:
+ bdevname(bdev, b);
+ ret = compat_blk_trace_setup(q, b, bdev->bd_dev, bdev, arg);
+ break;
+#endif
case BLKTRACESTART:
start = 1;
case BLKTRACESTOP:
}
mutex_unlock(&bdev->bd_mutex);
+ unlock_kernel();
return ret;
}
if (likely(!bt))
return;
- if (blk_discard_rq(rq))
- rw |= (1 << BIO_RW_DISCARD);
+ if (rq->cmd_flags & REQ_DISCARD)
+ rw |= REQ_DISCARD;
+
+ if (rq->cmd_flags & REQ_SECURE)
+ rw |= REQ_SECURE;
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
what |= BLK_TC_ACT(BLK_TC_PC);
__blk_add_trace(bt, 0, blk_rq_bytes(rq), rw,
what, rq->errors, rq->cmd_len, rq->cmd);
if (likely(!bt))
return;
- if (blk_pc_request(rq))
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
__blk_add_trace(bt, 0, blk_rq_bytes(rq), 0,
BLK_TA_DRV_DATA, rq->errors, len, data);
else
int len = rq->cmd_len;
unsigned char *cmd = rq->cmd;
- if (!blk_pc_request(rq)) {
+ if (rq->cmd_type != REQ_TYPE_BLOCK_PC) {
buf[0] = '\0';
return;
}
if (rw & WRITE)
rwbs[i++] = 'W';
- else if (rw & 1 << BIO_RW_DISCARD)
+ else if (rw & REQ_DISCARD)
rwbs[i++] = 'D';
else if (bytes)
rwbs[i++] = 'R';
else
rwbs[i++] = 'N';
- if (rw & 1 << BIO_RW_AHEAD)
+ if (rw & REQ_RAHEAD)
rwbs[i++] = 'A';
- if (rw & 1 << BIO_RW_BARRIER)
+ if (rw & REQ_HARDBARRIER)
rwbs[i++] = 'B';
- if (rw & 1 << BIO_RW_SYNCIO)
+ if (rw & REQ_SYNC)
rwbs[i++] = 'S';
- if (rw & 1 << BIO_RW_META)
+ if (rw & REQ_META)
rwbs[i++] = 'M';
+ if (rw & REQ_SECURE)
+ rwbs[i++] = 'E';
rwbs[i] = '\0';
}
int rw = rq->cmd_flags & 0x03;
int bytes;
- if (blk_discard_rq(rq))
- rw |= (1 << BIO_RW_DISCARD);
+ if (rq->cmd_flags & REQ_DISCARD)
+ rw |= REQ_DISCARD;
+
+ if (rq->cmd_flags & REQ_SECURE)
+ rw |= REQ_SECURE;
bytes = blk_rq_bytes(rq);
rpos = reader->read;
pos += size;
+ if (rpos >= commit)
+ break;
+
event = rb_reader_event(cpu_buffer);
size = rb_event_length(event);
} while (len > size);
size_t cnt, loff_t *fpos)
{
char *buf;
+ size_t written;
if (tracing_disabled)
return -EINVAL;
} else
buf[cnt] = '\0';
- cnt = mark_printk("%s", buf);
+ written = mark_printk("%s", buf);
kfree(buf);
- *fpos += cnt;
+ *fpos += written;
- return cnt;
+ /* don't tell userspace we wrote more - it might confuse them */
+ if (written > cnt)
+ written = cnt;
+
+ return written;
}
static int tracing_clock_show(struct seq_file *m, void *v)
return ret;
}
-static void print_event_fields(struct trace_seq *s, struct list_head *head)
+enum {
+ FORMAT_HEADER = 1,
+ FORMAT_PRINTFMT = 2,
+};
+
+static void *f_next(struct seq_file *m, void *v, loff_t *pos)
{
+ struct ftrace_event_call *call = m->private;
struct ftrace_event_field *field;
+ struct list_head *head;
- list_for_each_entry_reverse(field, head, link) {
- /*
- * Smartly shows the array type(except dynamic array).
- * Normal:
- * field:TYPE VAR
- * If TYPE := TYPE[LEN], it is shown:
- * field:TYPE VAR[LEN]
- */
- const char *array_descriptor = strchr(field->type, '[');
+ (*pos)++;
- if (!strncmp(field->type, "__data_loc", 10))
- array_descriptor = NULL;
+ switch ((unsigned long)v) {
+ case FORMAT_HEADER:
+ head = &ftrace_common_fields;
- if (!array_descriptor) {
- trace_seq_printf(s, "\tfield:%s %s;\toffset:%u;"
- "\tsize:%u;\tsigned:%d;\n",
- field->type, field->name, field->offset,
- field->size, !!field->is_signed);
- } else {
- trace_seq_printf(s, "\tfield:%.*s %s%s;\toffset:%u;"
- "\tsize:%u;\tsigned:%d;\n",
- (int)(array_descriptor - field->type),
- field->type, field->name,
- array_descriptor, field->offset,
- field->size, !!field->is_signed);
- }
+ if (unlikely(list_empty(head)))
+ return NULL;
+
+ field = list_entry(head->prev, struct ftrace_event_field, link);
+ return field;
+
+ case FORMAT_PRINTFMT:
+ /* all done */
+ return NULL;
+ }
+
+ head = trace_get_fields(call);
+
+ /*
+ * To separate common fields from event fields, the
+ * LSB is set on the first event field. Clear it in case.
+ */
+ v = (void *)((unsigned long)v & ~1L);
+
+ field = v;
+ /*
+ * If this is a common field, and at the end of the list, then
+ * continue with main list.
+ */
+ if (field->link.prev == &ftrace_common_fields) {
+ if (unlikely(list_empty(head)))
+ return NULL;
+ field = list_entry(head->prev, struct ftrace_event_field, link);
+ /* Set the LSB to notify f_show to print an extra newline */
+ field = (struct ftrace_event_field *)
+ ((unsigned long)field | 1);
+ return field;
}
+
+ /* If we are done tell f_show to print the format */
+ if (field->link.prev == head)
+ return (void *)FORMAT_PRINTFMT;
+
+ field = list_entry(field->link.prev, struct ftrace_event_field, link);
+
+ return field;
}
-static ssize_t
-event_format_read(struct file *filp, char __user *ubuf, size_t cnt,
- loff_t *ppos)
+static void *f_start(struct seq_file *m, loff_t *pos)
{
- struct ftrace_event_call *call = filp->private_data;
- struct list_head *head;
- struct trace_seq *s;
- char *buf;
- int r;
+ loff_t l = 0;
+ void *p;
- if (*ppos)
+ /* Start by showing the header */
+ if (!*pos)
+ return (void *)FORMAT_HEADER;
+
+ p = (void *)FORMAT_HEADER;
+ do {
+ p = f_next(m, p, &l);
+ } while (p && l < *pos);
+
+ return p;
+}
+
+static int f_show(struct seq_file *m, void *v)
+{
+ struct ftrace_event_call *call = m->private;
+ struct ftrace_event_field *field;
+ const char *array_descriptor;
+
+ switch ((unsigned long)v) {
+ case FORMAT_HEADER:
+ seq_printf(m, "name: %s\n", call->name);
+ seq_printf(m, "ID: %d\n", call->event.type);
+ seq_printf(m, "format:\n");
return 0;
- s = kmalloc(sizeof(*s), GFP_KERNEL);
- if (!s)
- return -ENOMEM;
+ case FORMAT_PRINTFMT:
+ seq_printf(m, "\nprint fmt: %s\n",
+ call->print_fmt);
+ return 0;
+ }
- trace_seq_init(s);
+ /*
+ * To separate common fields from event fields, the
+ * LSB is set on the first event field. Clear it and
+ * print a newline if it is set.
+ */
+ if ((unsigned long)v & 1) {
+ seq_putc(m, '\n');
+ v = (void *)((unsigned long)v & ~1L);
+ }
- trace_seq_printf(s, "name: %s\n", call->name);
- trace_seq_printf(s, "ID: %d\n", call->event.type);
- trace_seq_printf(s, "format:\n");
+ field = v;
- /* print common fields */
- print_event_fields(s, &ftrace_common_fields);
+ /*
+ * Smartly shows the array type(except dynamic array).
+ * Normal:
+ * field:TYPE VAR
+ * If TYPE := TYPE[LEN], it is shown:
+ * field:TYPE VAR[LEN]
+ */
+ array_descriptor = strchr(field->type, '[');
- trace_seq_putc(s, '\n');
+ if (!strncmp(field->type, "__data_loc", 10))
+ array_descriptor = NULL;
- /* print event specific fields */
- head = trace_get_fields(call);
- print_event_fields(s, head);
+ if (!array_descriptor)
+ seq_printf(m, "\tfield:%s %s;\toffset:%u;\tsize:%u;\tsigned:%d;\n",
+ field->type, field->name, field->offset,
+ field->size, !!field->is_signed);
+ else
+ seq_printf(m, "\tfield:%.*s %s%s;\toffset:%u;\tsize:%u;\tsigned:%d;\n",
+ (int)(array_descriptor - field->type),
+ field->type, field->name,
+ array_descriptor, field->offset,
+ field->size, !!field->is_signed);
- r = trace_seq_printf(s, "\nprint fmt: %s\n", call->print_fmt);
+ return 0;
+}
- if (!r) {
- /*
- * ug! The format output is bigger than a PAGE!!
- */
- buf = "FORMAT TOO BIG\n";
- r = simple_read_from_buffer(ubuf, cnt, ppos,
- buf, strlen(buf));
- goto out;
- }
+static void f_stop(struct seq_file *m, void *p)
+{
+}
- r = simple_read_from_buffer(ubuf, cnt, ppos,
- s->buffer, s->len);
- out:
- kfree(s);
- return r;
+static const struct seq_operations trace_format_seq_ops = {
+ .start = f_start,
+ .next = f_next,
+ .stop = f_stop,
+ .show = f_show,
+};
+
+static int trace_format_open(struct inode *inode, struct file *file)
+{
+ struct ftrace_event_call *call = inode->i_private;
+ struct seq_file *m;
+ int ret;
+
+ ret = seq_open(file, &trace_format_seq_ops);
+ if (ret < 0)
+ return ret;
+
+ m = file->private_data;
+ m->private = call;
+
+ return 0;
}
static ssize_t
};
static const struct file_operations ftrace_event_format_fops = {
- .open = tracing_open_generic,
- .read = event_format_read,
+ .open = trace_format_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
};
static const struct file_operations ftrace_event_id_fops = {
* if the output fails.
*/
data->ent = *curr;
- data->ret = *next;
+ /*
+ * If the next event is not a return type, then
+ * we only care about what type it is. Otherwise we can
+ * safely copy the entire event.
+ */
+ if (next->ent.type == TRACE_GRAPH_RET)
+ data->ret = *next;
+ else
+ data->ret.ent.type = next->ent.type;
}
}
menu "Library routines"
+config RAID6_PQ
+ tristate
+
config BITREVERSE
tristate
If unsure, say N.
+config DEBUG_KMEMLEAK_DEFAULT_OFF
+ bool "Default kmemleak to off"
+ depends on DEBUG_KMEMLEAK
+ help
+ Say Y here to disable kmemleak by default. It can then be enabled
+ on the command line via kmemleak=on.
+
config DEBUG_PREEMPT
bool "Debug preemptible kernel"
depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT
config LATENCYTOP
bool "Latency measuring infrastructure"
+ depends on HAVE_LATENCYTOP_SUPPORT
+ depends on DEBUG_KERNEL
+ depends on STACKTRACE_SUPPORT
+ depends on PROC_FS
select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE
select KALLSYMS
select KALLSYMS_ALL
select STACKTRACE
select SCHEDSTATS
select SCHED_DEBUG
- depends on HAVE_LATENCYTOP_SUPPORT
help
Enable this option if you want to use the LatencyTOP tool
to find out which userspace is blocking on what kernel operations.
obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
obj-$(CONFIG_LZO_COMPRESS) += lzo/
obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
+obj-$(CONFIG_RAID6_PQ) += raid6/
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
bug = find_bug(bugaddr);
- printk(KERN_EMERG "------------[ cut here ]------------\n");
-
file = NULL;
line = 0;
warning = 0;
if (warning) {
/* this is a WARN_ON rather than BUG/BUG_ON */
+ printk(KERN_WARNING "------------[ cut here ]------------\n");
+
if (file)
- printk(KERN_ERR "Badness at %s:%u\n",
+ printk(KERN_WARNING "WARNING: at %s:%u\n",
file, line);
else
- printk(KERN_ERR "Badness at %p "
+ printk(KERN_WARNING "WARNING: at %p "
"[verbose debug info unavailable]\n",
(void *)bugaddr);
+ print_modules();
show_regs(regs);
+ print_oops_end_marker();
add_taint(BUG_GET_TAINT(bug));
return BUG_TRAP_TYPE_WARN;
}
+ printk(KERN_EMERG "------------[ cut here ]------------\n");
+
if (file)
printk(KERN_CRIT "kernel BUG at %s:%u!\n",
file, line);
unsigned char selectors[32768]; /* nSelectors = 15 bits */
struct group_data groups[MAX_GROUPS]; /* Huffman coding tables */
int io_error; /* non-zero if we have IO error */
+ int byteCount[256];
+ unsigned char symToByte[256], mtfSymbol[256];
};
int *base = NULL;
int *limit = NULL;
int dbufCount, nextSym, dbufSize, groupCount, selector,
- i, j, k, t, runPos, symCount, symTotal, nSelectors,
- byteCount[256];
- unsigned char uc, symToByte[256], mtfSymbol[256], *selectors;
+ i, j, k, t, runPos, symCount, symTotal, nSelectors, *byteCount;
+ unsigned char uc, *symToByte, *mtfSymbol, *selectors;
unsigned int *dbuf, origPtr;
dbuf = bd->dbuf;
dbufSize = bd->dbufSize;
selectors = bd->selectors;
+ byteCount = bd->byteCount;
+ symToByte = bd->symToByte;
+ mtfSymbol = bd->mtfSymbol;
/* Read in header signature and CRC, then validate signature.
(last block signature means CRC is for whole file, return now) */
the two sets of lengths.
*/
#include <linux/compiler.h>
+#ifdef NO_INFLATE_MALLOC
#include <linux/slab.h>
+#endif
#ifdef RCSID
static char rcsid[] = "#Id: inflate.c,v 0.14 1993/06/10 13:27:04 jloup Exp #";
--- /dev/null
+obj-$(CONFIG_RAID6_PQ) += raid6_pq.o
+
+raid6_pq-y += algos.o recov.o tables.o int1.o int2.o int4.o \
+ int8.o int16.o int32.o altivec1.o altivec2.o altivec4.o \
+ altivec8.o mmx.o sse1.o sse2.o
+hostprogs-y += mktables
+
+quiet_cmd_unroll = UNROLL $@
+ cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \
+ < $< > $@ || ( rm -f $@ && exit 1 )
+
+ifeq ($(CONFIG_ALTIVEC),y)
+altivec_flags := -maltivec -mabi=altivec
+endif
+
+targets += int1.c
+$(obj)/int1.c: UNROLL := 1
+$(obj)/int1.c: $(src)/int.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+targets += int2.c
+$(obj)/int2.c: UNROLL := 2
+$(obj)/int2.c: $(src)/int.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+targets += int4.c
+$(obj)/int4.c: UNROLL := 4
+$(obj)/int4.c: $(src)/int.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+targets += int8.c
+$(obj)/int8.c: UNROLL := 8
+$(obj)/int8.c: $(src)/int.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+targets += int16.c
+$(obj)/int16.c: UNROLL := 16
+$(obj)/int16.c: $(src)/int.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+targets += int32.c
+$(obj)/int32.c: UNROLL := 32
+$(obj)/int32.c: $(src)/int.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+CFLAGS_altivec1.o += $(altivec_flags)
+targets += altivec1.c
+$(obj)/altivec1.c: UNROLL := 1
+$(obj)/altivec1.c: $(src)/altivec.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+CFLAGS_altivec2.o += $(altivec_flags)
+targets += altivec2.c
+$(obj)/altivec2.c: UNROLL := 2
+$(obj)/altivec2.c: $(src)/altivec.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+CFLAGS_altivec4.o += $(altivec_flags)
+targets += altivec4.c
+$(obj)/altivec4.c: UNROLL := 4
+$(obj)/altivec4.c: $(src)/altivec.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+CFLAGS_altivec8.o += $(altivec_flags)
+targets += altivec8.c
+$(obj)/altivec8.c: UNROLL := 8
+$(obj)/altivec8.c: $(src)/altivec.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+quiet_cmd_mktable = TABLE $@
+ cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )
+
+targets += tables.c
+$(obj)/tables.c: $(obj)/mktables FORCE
+ $(call if_changed,mktable)
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright 2002 H. Peter Anvin - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ * Boston MA 02111-1307, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6/algos.c
+ *
+ * Algorithm list and algorithm selection for RAID-6
+ */
+
+#include <linux/raid/pq.h>
+#ifndef __KERNEL__
+#include <sys/mman.h>
+#include <stdio.h>
+#else
+#include <linux/gfp.h>
+#if !RAID6_USE_EMPTY_ZERO_PAGE
+/* In .bss so it's zeroed */
+const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
+EXPORT_SYMBOL(raid6_empty_zero_page);
+#endif
+#endif
+
+struct raid6_calls raid6_call;
+EXPORT_SYMBOL_GPL(raid6_call);
+
+const struct raid6_calls * const raid6_algos[] = {
+ &raid6_intx1,
+ &raid6_intx2,
+ &raid6_intx4,
+ &raid6_intx8,
+#if defined(__ia64__)
+ &raid6_intx16,
+ &raid6_intx32,
+#endif
+#if defined(__i386__) && !defined(__arch_um__)
+ &raid6_mmxx1,
+ &raid6_mmxx2,
+ &raid6_sse1x1,
+ &raid6_sse1x2,
+ &raid6_sse2x1,
+ &raid6_sse2x2,
+#endif
+#if defined(__x86_64__) && !defined(__arch_um__)
+ &raid6_sse2x1,
+ &raid6_sse2x2,
+ &raid6_sse2x4,
+#endif
+#ifdef CONFIG_ALTIVEC
+ &raid6_altivec1,
+ &raid6_altivec2,
+ &raid6_altivec4,
+ &raid6_altivec8,
+#endif
+ NULL
+};
+
+#ifdef __KERNEL__
+#define RAID6_TIME_JIFFIES_LG2 4
+#else
+/* Need more time to be stable in userspace */
+#define RAID6_TIME_JIFFIES_LG2 9
+#define time_before(x, y) ((x) < (y))
+#endif
+
+/* Try to pick the best algorithm */
+/* This code uses the gfmul table as convenient data set to abuse */
+
+int __init raid6_select_algo(void)
+{
+ const struct raid6_calls * const * algo;
+ const struct raid6_calls * best;
+ char *syndromes;
+ void *dptrs[(65536/PAGE_SIZE)+2];
+ int i, disks;
+ unsigned long perf, bestperf;
+ int bestprefer;
+ unsigned long j0, j1;
+
+ disks = (65536/PAGE_SIZE)+2;
+ for ( i = 0 ; i < disks-2 ; i++ ) {
+ dptrs[i] = ((char *)raid6_gfmul) + PAGE_SIZE*i;
+ }
+
+ /* Normal code - use a 2-page allocation to avoid D$ conflict */
+ syndromes = (void *) __get_free_pages(GFP_KERNEL, 1);
+
+ if ( !syndromes ) {
+ printk("raid6: Yikes! No memory available.\n");
+ return -ENOMEM;
+ }
+
+ dptrs[disks-2] = syndromes;
+ dptrs[disks-1] = syndromes + PAGE_SIZE;
+
+ bestperf = 0; bestprefer = 0; best = NULL;
+
+ for ( algo = raid6_algos ; *algo ; algo++ ) {
+ if ( !(*algo)->valid || (*algo)->valid() ) {
+ perf = 0;
+
+ preempt_disable();
+ j0 = jiffies;
+ while ( (j1 = jiffies) == j0 )
+ cpu_relax();
+ while (time_before(jiffies,
+ j1 + (1<<RAID6_TIME_JIFFIES_LG2))) {
+ (*algo)->gen_syndrome(disks, PAGE_SIZE, dptrs);
+ perf++;
+ }
+ preempt_enable();
+
+ if ( (*algo)->prefer > bestprefer ||
+ ((*algo)->prefer == bestprefer &&
+ perf > bestperf) ) {
+ best = *algo;
+ bestprefer = best->prefer;
+ bestperf = perf;
+ }
+ printk("raid6: %-8s %5ld MB/s\n", (*algo)->name,
+ (perf*HZ) >> (20-16+RAID6_TIME_JIFFIES_LG2));
+ }
+ }
+
+ if (best) {
+ printk("raid6: using algorithm %s (%ld MB/s)\n",
+ best->name,
+ (bestperf*HZ) >> (20-16+RAID6_TIME_JIFFIES_LG2));
+ raid6_call = *best;
+ } else
+ printk("raid6: Yikes! No algorithm found!\n");
+
+ free_pages((unsigned long)syndromes, 1);
+
+ return best ? 0 : -EINVAL;
+}
+
+static void raid6_exit(void)
+{
+ do { } while (0);
+}
+
+subsys_initcall(raid6_select_algo);
+module_exit(raid6_exit);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("RAID6 Q-syndrome calculations");
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ * Boston MA 02111-1307, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6altivec$#.c
+ *
+ * $#-way unrolled portable integer math RAID-6 instruction set
+ *
+ * This file is postprocessed using unroll.awk
+ *
+ * <benh> hpa: in process,
+ * you can just "steal" the vec unit with enable_kernel_altivec() (but
+ * bracked this with preempt_disable/enable or in a lock)
+ */
+
+#include <linux/raid/pq.h>
+
+#ifdef CONFIG_ALTIVEC
+
+#include <altivec.h>
+#ifdef __KERNEL__
+# include <asm/system.h>
+# include <asm/cputable.h>
+#endif
+
+/*
+ * This is the C data type to use. We use a vector of
+ * signed char so vec_cmpgt() will generate the right
+ * instruction.
+ */
+
+typedef vector signed char unative_t;
+
+#define NBYTES(x) ((vector signed char) {x,x,x,x, x,x,x,x, x,x,x,x, x,x,x,x})
+#define NSIZE sizeof(unative_t)
+
+/*
+ * The SHLBYTE() operation shifts each byte left by 1, *not*
+ * rolling over into the next byte
+ */
+static inline __attribute_const__ unative_t SHLBYTE(unative_t v)
+{
+ return vec_add(v,v);
+}
+
+/*
+ * The MASK() operation returns 0xFF in any byte for which the high
+ * bit is 1, 0x00 for any byte for which the high bit is 0.
+ */
+static inline __attribute_const__ unative_t MASK(unative_t v)
+{
+ unative_t zv = NBYTES(0);
+
+ /* vec_cmpgt returns a vector bool char; thus the need for the cast */
+ return (unative_t)vec_cmpgt(zv, v);
+}
+
+
+/* This is noinline to make damned sure that gcc doesn't move any of the
+ Altivec code around the enable/disable code */
+static void noinline
+raid6_altivec$#_gen_syndrome_real(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ unative_t wd$$, wq$$, wp$$, w1$$, w2$$;
+ unative_t x1d = NBYTES(0x1d);
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ for ( d = 0 ; d < bytes ; d += NSIZE*$# ) {
+ wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE];
+ for ( z = z0-1 ; z >= 0 ; z-- ) {
+ wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE];
+ wp$$ = vec_xor(wp$$, wd$$);
+ w2$$ = MASK(wq$$);
+ w1$$ = SHLBYTE(wq$$);
+ w2$$ = vec_and(w2$$, x1d);
+ w1$$ = vec_xor(w1$$, w2$$);
+ wq$$ = vec_xor(w1$$, wd$$);
+ }
+ *(unative_t *)&p[d+NSIZE*$$] = wp$$;
+ *(unative_t *)&q[d+NSIZE*$$] = wq$$;
+ }
+}
+
+static void raid6_altivec$#_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ preempt_disable();
+ enable_kernel_altivec();
+
+ raid6_altivec$#_gen_syndrome_real(disks, bytes, ptrs);
+
+ preempt_enable();
+}
+
+int raid6_have_altivec(void);
+#if $# == 1
+int raid6_have_altivec(void)
+{
+ /* This assumes either all CPUs have Altivec or none does */
+# ifdef __KERNEL__
+ return cpu_has_feature(CPU_FTR_ALTIVEC);
+# else
+ return 1;
+# endif
+}
+#endif
+
+const struct raid6_calls raid6_altivec$# = {
+ raid6_altivec$#_gen_syndrome,
+ raid6_have_altivec,
+ "altivecx$#",
+ 0
+};
+
+#endif /* CONFIG_ALTIVEC */
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ * Boston MA 02111-1307, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6int$#.c
+ *
+ * $#-way unrolled portable integer math RAID-6 instruction set
+ *
+ * This file is postprocessed using unroll.awk
+ */
+
+#include <linux/raid/pq.h>
+
+/*
+ * This is the C data type to use
+ */
+
+/* Change this from BITS_PER_LONG if there is something better... */
+#if BITS_PER_LONG == 64
+# define NBYTES(x) ((x) * 0x0101010101010101UL)
+# define NSIZE 8
+# define NSHIFT 3
+# define NSTRING "64"
+typedef u64 unative_t;
+#else
+# define NBYTES(x) ((x) * 0x01010101U)
+# define NSIZE 4
+# define NSHIFT 2
+# define NSTRING "32"
+typedef u32 unative_t;
+#endif
+
+
+
+/*
+ * IA-64 wants insane amounts of unrolling. On other architectures that
+ * is just a waste of space.
+ */
+#if ($# <= 8) || defined(__ia64__)
+
+
+/*
+ * These sub-operations are separate inlines since they can sometimes be
+ * specially optimized using architecture-specific hacks.
+ */
+
+/*
+ * The SHLBYTE() operation shifts each byte left by 1, *not*
+ * rolling over into the next byte
+ */
+static inline __attribute_const__ unative_t SHLBYTE(unative_t v)
+{
+ unative_t vv;
+
+ vv = (v << 1) & NBYTES(0xfe);
+ return vv;
+}
+
+/*
+ * The MASK() operation returns 0xFF in any byte for which the high
+ * bit is 1, 0x00 for any byte for which the high bit is 0.
+ */
+static inline __attribute_const__ unative_t MASK(unative_t v)
+{
+ unative_t vv;
+
+ vv = v & NBYTES(0x80);
+ vv = (vv << 1) - (vv >> 7); /* Overflow on the top bit is OK */
+ return vv;
+}
+
+
+static void raid6_int$#_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ unative_t wd$$, wq$$, wp$$, w1$$, w2$$;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ for ( d = 0 ; d < bytes ; d += NSIZE*$# ) {
+ wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE];
+ for ( z = z0-1 ; z >= 0 ; z-- ) {
+ wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE];
+ wp$$ ^= wd$$;
+ w2$$ = MASK(wq$$);
+ w1$$ = SHLBYTE(wq$$);
+ w2$$ &= NBYTES(0x1d);
+ w1$$ ^= w2$$;
+ wq$$ = w1$$ ^ wd$$;
+ }
+ *(unative_t *)&p[d+NSIZE*$$] = wp$$;
+ *(unative_t *)&q[d+NSIZE*$$] = wq$$;
+ }
+}
+
+const struct raid6_calls raid6_intx$# = {
+ raid6_int$#_gen_syndrome,
+ NULL, /* always valid */
+ "int" NSTRING "x$#",
+ 0
+};
+
+#endif
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright 2002-2007 H. Peter Anvin - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2 or (at your
+ * option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * mktables.c
+ *
+ * Make RAID-6 tables. This is a host user space program to be run at
+ * compile time.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include <stdlib.h>
+#include <time.h>
+
+static uint8_t gfmul(uint8_t a, uint8_t b)
+{
+ uint8_t v = 0;
+
+ while (b) {
+ if (b & 1)
+ v ^= a;
+ a = (a << 1) ^ (a & 0x80 ? 0x1d : 0);
+ b >>= 1;
+ }
+
+ return v;
+}
+
+static uint8_t gfpow(uint8_t a, int b)
+{
+ uint8_t v = 1;
+
+ b %= 255;
+ if (b < 0)
+ b += 255;
+
+ while (b) {
+ if (b & 1)
+ v = gfmul(v, a);
+ a = gfmul(a, a);
+ b >>= 1;
+ }
+
+ return v;
+}
+
+int main(int argc, char *argv[])
+{
+ int i, j, k;
+ uint8_t v;
+ uint8_t exptbl[256], invtbl[256];
+
+ printf("#include <linux/raid/pq.h>\n");
+
+ /* Compute multiplication table */
+ printf("\nconst u8 __attribute__((aligned(256)))\n"
+ "raid6_gfmul[256][256] =\n"
+ "{\n");
+ for (i = 0; i < 256; i++) {
+ printf("\t{\n");
+ for (j = 0; j < 256; j += 8) {
+ printf("\t\t");
+ for (k = 0; k < 8; k++)
+ printf("0x%02x,%c", gfmul(i, j + k),
+ (k == 7) ? '\n' : ' ');
+ }
+ printf("\t},\n");
+ }
+ printf("};\n");
+ printf("#ifdef __KERNEL__\n");
+ printf("EXPORT_SYMBOL(raid6_gfmul);\n");
+ printf("#endif\n");
+
+ /* Compute power-of-2 table (exponent) */
+ v = 1;
+ printf("\nconst u8 __attribute__((aligned(256)))\n"
+ "raid6_gfexp[256] =\n" "{\n");
+ for (i = 0; i < 256; i += 8) {
+ printf("\t");
+ for (j = 0; j < 8; j++) {
+ exptbl[i + j] = v;
+ printf("0x%02x,%c", v, (j == 7) ? '\n' : ' ');
+ v = gfmul(v, 2);
+ if (v == 1)
+ v = 0; /* For entry 255, not a real entry */
+ }
+ }
+ printf("};\n");
+ printf("#ifdef __KERNEL__\n");
+ printf("EXPORT_SYMBOL(raid6_gfexp);\n");
+ printf("#endif\n");
+
+ /* Compute inverse table x^-1 == x^254 */
+ printf("\nconst u8 __attribute__((aligned(256)))\n"
+ "raid6_gfinv[256] =\n" "{\n");
+ for (i = 0; i < 256; i += 8) {
+ printf("\t");
+ for (j = 0; j < 8; j++) {
+ invtbl[i + j] = v = gfpow(i + j, 254);
+ printf("0x%02x,%c", v, (j == 7) ? '\n' : ' ');
+ }
+ }
+ printf("};\n");
+ printf("#ifdef __KERNEL__\n");
+ printf("EXPORT_SYMBOL(raid6_gfinv);\n");
+ printf("#endif\n");
+
+ /* Compute inv(2^x + 1) (exponent-xor-inverse) table */
+ printf("\nconst u8 __attribute__((aligned(256)))\n"
+ "raid6_gfexi[256] =\n" "{\n");
+ for (i = 0; i < 256; i += 8) {
+ printf("\t");
+ for (j = 0; j < 8; j++)
+ printf("0x%02x,%c", invtbl[exptbl[i + j] ^ 1],
+ (j == 7) ? '\n' : ' ');
+ }
+ printf("};\n");
+ printf("#ifdef __KERNEL__\n");
+ printf("EXPORT_SYMBOL(raid6_gfexi);\n");
+ printf("#endif\n");
+
+ return 0;
+}
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright 2002 H. Peter Anvin - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ * Boston MA 02111-1307, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6/mmx.c
+ *
+ * MMX implementation of RAID-6 syndrome functions
+ */
+
+#if defined(__i386__) && !defined(__arch_um__)
+
+#include <linux/raid/pq.h>
+#include "x86.h"
+
+/* Shared with raid6/sse1.c */
+const struct raid6_mmx_constants {
+ u64 x1d;
+} raid6_mmx_constants = {
+ 0x1d1d1d1d1d1d1d1dULL,
+};
+
+static int raid6_have_mmx(void)
+{
+ /* Not really "boot_cpu" but "all_cpus" */
+ return boot_cpu_has(X86_FEATURE_MMX);
+}
+
+/*
+ * Plain MMX implementation
+ */
+static void raid6_mmx1_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ kernel_fpu_begin();
+
+ asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
+ asm volatile("pxor %mm5,%mm5"); /* Zero temp */
+
+ for ( d = 0 ; d < bytes ; d += 8 ) {
+ asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
+ asm volatile("movq %mm2,%mm4"); /* Q[0] */
+ for ( z = z0-1 ; z >= 0 ; z-- ) {
+ asm volatile("movq %0,%%mm6" : : "m" (dptr[z][d]));
+ asm volatile("pcmpgtb %mm4,%mm5");
+ asm volatile("paddb %mm4,%mm4");
+ asm volatile("pand %mm0,%mm5");
+ asm volatile("pxor %mm5,%mm4");
+ asm volatile("pxor %mm5,%mm5");
+ asm volatile("pxor %mm6,%mm2");
+ asm volatile("pxor %mm6,%mm4");
+ }
+ asm volatile("movq %%mm2,%0" : "=m" (p[d]));
+ asm volatile("pxor %mm2,%mm2");
+ asm volatile("movq %%mm4,%0" : "=m" (q[d]));
+ asm volatile("pxor %mm4,%mm4");
+ }
+
+ kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_mmxx1 = {
+ raid6_mmx1_gen_syndrome,
+ raid6_have_mmx,
+ "mmxx1",
+ 0
+};
+
+/*
+ * Unrolled-by-2 MMX implementation
+ */
+static void raid6_mmx2_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ kernel_fpu_begin();
+
+ asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
+ asm volatile("pxor %mm5,%mm5"); /* Zero temp */
+ asm volatile("pxor %mm7,%mm7"); /* Zero temp */
+
+ for ( d = 0 ; d < bytes ; d += 16 ) {
+ asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
+ asm volatile("movq %0,%%mm3" : : "m" (dptr[z0][d+8]));
+ asm volatile("movq %mm2,%mm4"); /* Q[0] */
+ asm volatile("movq %mm3,%mm6"); /* Q[1] */
+ for ( z = z0-1 ; z >= 0 ; z-- ) {
+ asm volatile("pcmpgtb %mm4,%mm5");
+ asm volatile("pcmpgtb %mm6,%mm7");
+ asm volatile("paddb %mm4,%mm4");
+ asm volatile("paddb %mm6,%mm6");
+ asm volatile("pand %mm0,%mm5");
+ asm volatile("pand %mm0,%mm7");
+ asm volatile("pxor %mm5,%mm4");
+ asm volatile("pxor %mm7,%mm6");
+ asm volatile("movq %0,%%mm5" : : "m" (dptr[z][d]));
+ asm volatile("movq %0,%%mm7" : : "m" (dptr[z][d+8]));
+ asm volatile("pxor %mm5,%mm2");
+ asm volatile("pxor %mm7,%mm3");
+ asm volatile("pxor %mm5,%mm4");
+ asm volatile("pxor %mm7,%mm6");
+ asm volatile("pxor %mm5,%mm5");
+ asm volatile("pxor %mm7,%mm7");
+ }
+ asm volatile("movq %%mm2,%0" : "=m" (p[d]));
+ asm volatile("movq %%mm3,%0" : "=m" (p[d+8]));
+ asm volatile("movq %%mm4,%0" : "=m" (q[d]));
+ asm volatile("movq %%mm6,%0" : "=m" (q[d+8]));
+ }
+
+ kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_mmxx2 = {
+ raid6_mmx2_gen_syndrome,
+ raid6_have_mmx,
+ "mmxx2",
+ 0
+};
+
+#endif
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright 2002 H. Peter Anvin - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ * Boston MA 02111-1307, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6/recov.c
+ *
+ * RAID-6 data recovery in dual failure mode. In single failure mode,
+ * use the RAID-5 algorithm (or, in the case of Q failure, just reconstruct
+ * the syndrome.)
+ */
+
+#include <linux/raid/pq.h>
+
+/* Recover two failed data blocks. */
+void raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
+ void **ptrs)
+{
+ u8 *p, *q, *dp, *dq;
+ u8 px, qx, db;
+ const u8 *pbmul; /* P multiplier table for B data */
+ const u8 *qmul; /* Q multiplier table (for both) */
+
+ p = (u8 *)ptrs[disks-2];
+ q = (u8 *)ptrs[disks-1];
+
+ /* Compute syndrome with zero for the missing data pages
+ Use the dead data pages as temporary storage for
+ delta p and delta q */
+ dp = (u8 *)ptrs[faila];
+ ptrs[faila] = (void *)raid6_empty_zero_page;
+ ptrs[disks-2] = dp;
+ dq = (u8 *)ptrs[failb];
+ ptrs[failb] = (void *)raid6_empty_zero_page;
+ ptrs[disks-1] = dq;
+
+ raid6_call.gen_syndrome(disks, bytes, ptrs);
+
+ /* Restore pointer table */
+ ptrs[faila] = dp;
+ ptrs[failb] = dq;
+ ptrs[disks-2] = p;
+ ptrs[disks-1] = q;
+
+ /* Now, pick the proper data tables */
+ pbmul = raid6_gfmul[raid6_gfexi[failb-faila]];
+ qmul = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]]];
+
+ /* Now do it... */
+ while ( bytes-- ) {
+ px = *p ^ *dp;
+ qx = qmul[*q ^ *dq];
+ *dq++ = db = pbmul[px] ^ qx; /* Reconstructed B */
+ *dp++ = db ^ px; /* Reconstructed A */
+ p++; q++;
+ }
+}
+EXPORT_SYMBOL_GPL(raid6_2data_recov);
+
+/* Recover failure of one data block plus the P block */
+void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs)
+{
+ u8 *p, *q, *dq;
+ const u8 *qmul; /* Q multiplier table */
+
+ p = (u8 *)ptrs[disks-2];
+ q = (u8 *)ptrs[disks-1];
+
+ /* Compute syndrome with zero for the missing data page
+ Use the dead data page as temporary storage for delta q */
+ dq = (u8 *)ptrs[faila];
+ ptrs[faila] = (void *)raid6_empty_zero_page;
+ ptrs[disks-1] = dq;
+
+ raid6_call.gen_syndrome(disks, bytes, ptrs);
+
+ /* Restore pointer table */
+ ptrs[faila] = dq;
+ ptrs[disks-1] = q;
+
+ /* Now, pick the proper data tables */
+ qmul = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]]];
+
+ /* Now do it... */
+ while ( bytes-- ) {
+ *p++ ^= *dq = qmul[*q ^ *dq];
+ q++; dq++;
+ }
+}
+EXPORT_SYMBOL_GPL(raid6_datap_recov);
+
+#ifndef __KERNEL__
+/* Testing only */
+
+/* Recover two failed blocks. */
+void raid6_dual_recov(int disks, size_t bytes, int faila, int failb, void **ptrs)
+{
+ if ( faila > failb ) {
+ int tmp = faila;
+ faila = failb;
+ failb = tmp;
+ }
+
+ if ( failb == disks-1 ) {
+ if ( faila == disks-2 ) {
+ /* P+Q failure. Just rebuild the syndrome. */
+ raid6_call.gen_syndrome(disks, bytes, ptrs);
+ } else {
+ /* data+Q failure. Reconstruct data from P,
+ then rebuild syndrome. */
+ /* NOT IMPLEMENTED - equivalent to RAID-5 */
+ }
+ } else {
+ if ( failb == disks-2 ) {
+ /* data+P failure. */
+ raid6_datap_recov(disks, bytes, faila, ptrs);
+ } else {
+ /* data+data failure. */
+ raid6_2data_recov(disks, bytes, faila, failb, ptrs);
+ }
+ }
+}
+
+#endif
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright 2002 H. Peter Anvin - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ * Boston MA 02111-1307, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6/sse1.c
+ *
+ * SSE-1/MMXEXT implementation of RAID-6 syndrome functions
+ *
+ * This is really an MMX implementation, but it requires SSE-1 or
+ * AMD MMXEXT for prefetch support and a few other features. The
+ * support for nontemporal memory accesses is enough to make this
+ * worthwhile as a separate implementation.
+ */
+
+#if defined(__i386__) && !defined(__arch_um__)
+
+#include <linux/raid/pq.h>
+#include "x86.h"
+
+/* Defined in raid6/mmx.c */
+extern const struct raid6_mmx_constants {
+ u64 x1d;
+} raid6_mmx_constants;
+
+static int raid6_have_sse1_or_mmxext(void)
+{
+ /* Not really boot_cpu but "all_cpus" */
+ return boot_cpu_has(X86_FEATURE_MMX) &&
+ (boot_cpu_has(X86_FEATURE_XMM) ||
+ boot_cpu_has(X86_FEATURE_MMXEXT));
+}
+
+/*
+ * Plain SSE1 implementation
+ */
+static void raid6_sse11_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ kernel_fpu_begin();
+
+ asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
+ asm volatile("pxor %mm5,%mm5"); /* Zero temp */
+
+ for ( d = 0 ; d < bytes ; d += 8 ) {
+ asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
+ asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
+ asm volatile("prefetchnta %0" : : "m" (dptr[z0-1][d]));
+ asm volatile("movq %mm2,%mm4"); /* Q[0] */
+ asm volatile("movq %0,%%mm6" : : "m" (dptr[z0-1][d]));
+ for ( z = z0-2 ; z >= 0 ; z-- ) {
+ asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
+ asm volatile("pcmpgtb %mm4,%mm5");
+ asm volatile("paddb %mm4,%mm4");
+ asm volatile("pand %mm0,%mm5");
+ asm volatile("pxor %mm5,%mm4");
+ asm volatile("pxor %mm5,%mm5");
+ asm volatile("pxor %mm6,%mm2");
+ asm volatile("pxor %mm6,%mm4");
+ asm volatile("movq %0,%%mm6" : : "m" (dptr[z][d]));
+ }
+ asm volatile("pcmpgtb %mm4,%mm5");
+ asm volatile("paddb %mm4,%mm4");
+ asm volatile("pand %mm0,%mm5");
+ asm volatile("pxor %mm5,%mm4");
+ asm volatile("pxor %mm5,%mm5");
+ asm volatile("pxor %mm6,%mm2");
+ asm volatile("pxor %mm6,%mm4");
+
+ asm volatile("movntq %%mm2,%0" : "=m" (p[d]));
+ asm volatile("movntq %%mm4,%0" : "=m" (q[d]));
+ }
+
+ asm volatile("sfence" : : : "memory");
+ kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_sse1x1 = {
+ raid6_sse11_gen_syndrome,
+ raid6_have_sse1_or_mmxext,
+ "sse1x1",
+ 1 /* Has cache hints */
+};
+
+/*
+ * Unrolled-by-2 SSE1 implementation
+ */
+static void raid6_sse12_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ kernel_fpu_begin();
+
+ asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
+ asm volatile("pxor %mm5,%mm5"); /* Zero temp */
+ asm volatile("pxor %mm7,%mm7"); /* Zero temp */
+
+ /* We uniformly assume a single prefetch covers at least 16 bytes */
+ for ( d = 0 ; d < bytes ; d += 16 ) {
+ asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
+ asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
+ asm volatile("movq %0,%%mm3" : : "m" (dptr[z0][d+8])); /* P[1] */
+ asm volatile("movq %mm2,%mm4"); /* Q[0] */
+ asm volatile("movq %mm3,%mm6"); /* Q[1] */
+ for ( z = z0-1 ; z >= 0 ; z-- ) {
+ asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
+ asm volatile("pcmpgtb %mm4,%mm5");
+ asm volatile("pcmpgtb %mm6,%mm7");
+ asm volatile("paddb %mm4,%mm4");
+ asm volatile("paddb %mm6,%mm6");
+ asm volatile("pand %mm0,%mm5");
+ asm volatile("pand %mm0,%mm7");
+ asm volatile("pxor %mm5,%mm4");
+ asm volatile("pxor %mm7,%mm6");
+ asm volatile("movq %0,%%mm5" : : "m" (dptr[z][d]));
+ asm volatile("movq %0,%%mm7" : : "m" (dptr[z][d+8]));
+ asm volatile("pxor %mm5,%mm2");
+ asm volatile("pxor %mm7,%mm3");
+ asm volatile("pxor %mm5,%mm4");
+ asm volatile("pxor %mm7,%mm6");
+ asm volatile("pxor %mm5,%mm5");
+ asm volatile("pxor %mm7,%mm7");
+ }
+ asm volatile("movntq %%mm2,%0" : "=m" (p[d]));
+ asm volatile("movntq %%mm3,%0" : "=m" (p[d+8]));
+ asm volatile("movntq %%mm4,%0" : "=m" (q[d]));
+ asm volatile("movntq %%mm6,%0" : "=m" (q[d+8]));
+ }
+
+ asm volatile("sfence" : :: "memory");
+ kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_sse1x2 = {
+ raid6_sse12_gen_syndrome,
+ raid6_have_sse1_or_mmxext,
+ "sse1x2",
+ 1 /* Has cache hints */
+};
+
+#endif
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright 2002 H. Peter Anvin - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ * Boston MA 02111-1307, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6/sse2.c
+ *
+ * SSE-2 implementation of RAID-6 syndrome functions
+ *
+ */
+
+#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__)
+
+#include <linux/raid/pq.h>
+#include "x86.h"
+
+static const struct raid6_sse_constants {
+ u64 x1d[2];
+} raid6_sse_constants __attribute__((aligned(16))) = {
+ { 0x1d1d1d1d1d1d1d1dULL, 0x1d1d1d1d1d1d1d1dULL },
+};
+
+static int raid6_have_sse2(void)
+{
+ /* Not really boot_cpu but "all_cpus" */
+ return boot_cpu_has(X86_FEATURE_MMX) &&
+ boot_cpu_has(X86_FEATURE_FXSR) &&
+ boot_cpu_has(X86_FEATURE_XMM) &&
+ boot_cpu_has(X86_FEATURE_XMM2);
+}
+
+/*
+ * Plain SSE2 implementation
+ */
+static void raid6_sse21_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ kernel_fpu_begin();
+
+ asm volatile("movdqa %0,%%xmm0" : : "m" (raid6_sse_constants.x1d[0]));
+ asm volatile("pxor %xmm5,%xmm5"); /* Zero temp */
+
+ for ( d = 0 ; d < bytes ; d += 16 ) {
+ asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
+ asm volatile("movdqa %0,%%xmm2" : : "m" (dptr[z0][d])); /* P[0] */
+ asm volatile("prefetchnta %0" : : "m" (dptr[z0-1][d]));
+ asm volatile("movdqa %xmm2,%xmm4"); /* Q[0] */
+ asm volatile("movdqa %0,%%xmm6" : : "m" (dptr[z0-1][d]));
+ for ( z = z0-2 ; z >= 0 ; z-- ) {
+ asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
+ asm volatile("pcmpgtb %xmm4,%xmm5");
+ asm volatile("paddb %xmm4,%xmm4");
+ asm volatile("pand %xmm0,%xmm5");
+ asm volatile("pxor %xmm5,%xmm4");
+ asm volatile("pxor %xmm5,%xmm5");
+ asm volatile("pxor %xmm6,%xmm2");
+ asm volatile("pxor %xmm6,%xmm4");
+ asm volatile("movdqa %0,%%xmm6" : : "m" (dptr[z][d]));
+ }
+ asm volatile("pcmpgtb %xmm4,%xmm5");
+ asm volatile("paddb %xmm4,%xmm4");
+ asm volatile("pand %xmm0,%xmm5");
+ asm volatile("pxor %xmm5,%xmm4");
+ asm volatile("pxor %xmm5,%xmm5");
+ asm volatile("pxor %xmm6,%xmm2");
+ asm volatile("pxor %xmm6,%xmm4");
+
+ asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
+ asm volatile("pxor %xmm2,%xmm2");
+ asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
+ asm volatile("pxor %xmm4,%xmm4");
+ }
+
+ asm volatile("sfence" : : : "memory");
+ kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_sse2x1 = {
+ raid6_sse21_gen_syndrome,
+ raid6_have_sse2,
+ "sse2x1",
+ 1 /* Has cache hints */
+};
+
+/*
+ * Unrolled-by-2 SSE2 implementation
+ */
+static void raid6_sse22_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ kernel_fpu_begin();
+
+ asm volatile("movdqa %0,%%xmm0" : : "m" (raid6_sse_constants.x1d[0]));
+ asm volatile("pxor %xmm5,%xmm5"); /* Zero temp */
+ asm volatile("pxor %xmm7,%xmm7"); /* Zero temp */
+
+ /* We uniformly assume a single prefetch covers at least 32 bytes */
+ for ( d = 0 ; d < bytes ; d += 32 ) {
+ asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
+ asm volatile("movdqa %0,%%xmm2" : : "m" (dptr[z0][d])); /* P[0] */
+ asm volatile("movdqa %0,%%xmm3" : : "m" (dptr[z0][d+16])); /* P[1] */
+ asm volatile("movdqa %xmm2,%xmm4"); /* Q[0] */
+ asm volatile("movdqa %xmm3,%xmm6"); /* Q[1] */
+ for ( z = z0-1 ; z >= 0 ; z-- ) {
+ asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
+ asm volatile("pcmpgtb %xmm4,%xmm5");
+ asm volatile("pcmpgtb %xmm6,%xmm7");
+ asm volatile("paddb %xmm4,%xmm4");
+ asm volatile("paddb %xmm6,%xmm6");
+ asm volatile("pand %xmm0,%xmm5");
+ asm volatile("pand %xmm0,%xmm7");
+ asm volatile("pxor %xmm5,%xmm4");
+ asm volatile("pxor %xmm7,%xmm6");
+ asm volatile("movdqa %0,%%xmm5" : : "m" (dptr[z][d]));
+ asm volatile("movdqa %0,%%xmm7" : : "m" (dptr[z][d+16]));
+ asm volatile("pxor %xmm5,%xmm2");
+ asm volatile("pxor %xmm7,%xmm3");
+ asm volatile("pxor %xmm5,%xmm4");
+ asm volatile("pxor %xmm7,%xmm6");
+ asm volatile("pxor %xmm5,%xmm5");
+ asm volatile("pxor %xmm7,%xmm7");
+ }
+ asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
+ asm volatile("movntdq %%xmm3,%0" : "=m" (p[d+16]));
+ asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
+ asm volatile("movntdq %%xmm6,%0" : "=m" (q[d+16]));
+ }
+
+ asm volatile("sfence" : : : "memory");
+ kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_sse2x2 = {
+ raid6_sse22_gen_syndrome,
+ raid6_have_sse2,
+ "sse2x2",
+ 1 /* Has cache hints */
+};
+
+#endif
+
+#if defined(__x86_64__) && !defined(__arch_um__)
+
+/*
+ * Unrolled-by-4 SSE2 implementation
+ */
+static void raid6_sse24_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ kernel_fpu_begin();
+
+ asm volatile("movdqa %0,%%xmm0" :: "m" (raid6_sse_constants.x1d[0]));
+ asm volatile("pxor %xmm2,%xmm2"); /* P[0] */
+ asm volatile("pxor %xmm3,%xmm3"); /* P[1] */
+ asm volatile("pxor %xmm4,%xmm4"); /* Q[0] */
+ asm volatile("pxor %xmm5,%xmm5"); /* Zero temp */
+ asm volatile("pxor %xmm6,%xmm6"); /* Q[1] */
+ asm volatile("pxor %xmm7,%xmm7"); /* Zero temp */
+ asm volatile("pxor %xmm10,%xmm10"); /* P[2] */
+ asm volatile("pxor %xmm11,%xmm11"); /* P[3] */
+ asm volatile("pxor %xmm12,%xmm12"); /* Q[2] */
+ asm volatile("pxor %xmm13,%xmm13"); /* Zero temp */
+ asm volatile("pxor %xmm14,%xmm14"); /* Q[3] */
+ asm volatile("pxor %xmm15,%xmm15"); /* Zero temp */
+
+ for ( d = 0 ; d < bytes ; d += 64 ) {
+ for ( z = z0 ; z >= 0 ; z-- ) {
+ /* The second prefetch seems to improve performance... */
+ asm volatile("prefetchnta %0" :: "m" (dptr[z][d]));
+ asm volatile("prefetchnta %0" :: "m" (dptr[z][d+32]));
+ asm volatile("pcmpgtb %xmm4,%xmm5");
+ asm volatile("pcmpgtb %xmm6,%xmm7");
+ asm volatile("pcmpgtb %xmm12,%xmm13");
+ asm volatile("pcmpgtb %xmm14,%xmm15");
+ asm volatile("paddb %xmm4,%xmm4");
+ asm volatile("paddb %xmm6,%xmm6");
+ asm volatile("paddb %xmm12,%xmm12");
+ asm volatile("paddb %xmm14,%xmm14");
+ asm volatile("pand %xmm0,%xmm5");
+ asm volatile("pand %xmm0,%xmm7");
+ asm volatile("pand %xmm0,%xmm13");
+ asm volatile("pand %xmm0,%xmm15");
+ asm volatile("pxor %xmm5,%xmm4");
+ asm volatile("pxor %xmm7,%xmm6");
+ asm volatile("pxor %xmm13,%xmm12");
+ asm volatile("pxor %xmm15,%xmm14");
+ asm volatile("movdqa %0,%%xmm5" :: "m" (dptr[z][d]));
+ asm volatile("movdqa %0,%%xmm7" :: "m" (dptr[z][d+16]));
+ asm volatile("movdqa %0,%%xmm13" :: "m" (dptr[z][d+32]));
+ asm volatile("movdqa %0,%%xmm15" :: "m" (dptr[z][d+48]));
+ asm volatile("pxor %xmm5,%xmm2");
+ asm volatile("pxor %xmm7,%xmm3");
+ asm volatile("pxor %xmm13,%xmm10");
+ asm volatile("pxor %xmm15,%xmm11");
+ asm volatile("pxor %xmm5,%xmm4");
+ asm volatile("pxor %xmm7,%xmm6");
+ asm volatile("pxor %xmm13,%xmm12");
+ asm volatile("pxor %xmm15,%xmm14");
+ asm volatile("pxor %xmm5,%xmm5");
+ asm volatile("pxor %xmm7,%xmm7");
+ asm volatile("pxor %xmm13,%xmm13");
+ asm volatile("pxor %xmm15,%xmm15");
+ }
+ asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
+ asm volatile("pxor %xmm2,%xmm2");
+ asm volatile("movntdq %%xmm3,%0" : "=m" (p[d+16]));
+ asm volatile("pxor %xmm3,%xmm3");
+ asm volatile("movntdq %%xmm10,%0" : "=m" (p[d+32]));
+ asm volatile("pxor %xmm10,%xmm10");
+ asm volatile("movntdq %%xmm11,%0" : "=m" (p[d+48]));
+ asm volatile("pxor %xmm11,%xmm11");
+ asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
+ asm volatile("pxor %xmm4,%xmm4");
+ asm volatile("movntdq %%xmm6,%0" : "=m" (q[d+16]));
+ asm volatile("pxor %xmm6,%xmm6");
+ asm volatile("movntdq %%xmm12,%0" : "=m" (q[d+32]));
+ asm volatile("pxor %xmm12,%xmm12");
+ asm volatile("movntdq %%xmm14,%0" : "=m" (q[d+48]));
+ asm volatile("pxor %xmm14,%xmm14");
+ }
+
+ asm volatile("sfence" : : : "memory");
+ kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_sse2x4 = {
+ raid6_sse24_gen_syndrome,
+ raid6_have_sse2,
+ "sse2x4",
+ 1 /* Has cache hints */
+};
+
+#endif
--- /dev/null
+#
+# This is a simple Makefile to test some of the RAID-6 code
+# from userspace.
+#
+
+CC = gcc
+OPTFLAGS = -O2 # Adjust as desired
+CFLAGS = -I.. -I ../../../include -g $(OPTFLAGS)
+LD = ld
+AWK = awk -f
+AR = ar
+RANLIB = ranlib
+
+.c.o:
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+%.c: ../%.c
+ cp -f $< $@
+
+%.uc: ../%.uc
+ cp -f $< $@
+
+all: raid6.a raid6test
+
+raid6.a: int1.o int2.o int4.o int8.o int16.o int32.o mmx.o sse1.o sse2.o \
+ altivec1.o altivec2.o altivec4.o altivec8.o recov.o algos.o \
+ tables.o
+ rm -f $@
+ $(AR) cq $@ $^
+ $(RANLIB) $@
+
+raid6test: test.c raid6.a
+ $(CC) $(CFLAGS) -o raid6test $^
+
+altivec1.c: altivec.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=1 < altivec.uc > $@
+
+altivec2.c: altivec.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=2 < altivec.uc > $@
+
+altivec4.c: altivec.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=4 < altivec.uc > $@
+
+altivec8.c: altivec.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=8 < altivec.uc > $@
+
+int1.c: int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=1 < int.uc > $@
+
+int2.c: int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=2 < int.uc > $@
+
+int4.c: int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=4 < int.uc > $@
+
+int8.c: int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=8 < int.uc > $@
+
+int16.c: int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=16 < int.uc > $@
+
+int32.c: int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=32 < int.uc > $@
+
+tables.c: mktables
+ ./mktables > tables.c
+
+clean:
+ rm -f *.o *.a mktables mktables.c *.uc int*.c altivec*.c tables.c raid6test
+
+spotless: clean
+ rm -f *~
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright 2002-2007 H. Peter Anvin - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2 or (at your
+ * option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6test.c
+ *
+ * Test RAID-6 recovery with various algorithms
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <linux/raid/pq.h>
+
+#define NDISKS 16 /* Including P and Q */
+
+const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
+struct raid6_calls raid6_call;
+
+char *dataptrs[NDISKS];
+char data[NDISKS][PAGE_SIZE];
+char recovi[PAGE_SIZE], recovj[PAGE_SIZE];
+
+static void makedata(void)
+{
+ int i, j;
+
+ for (i = 0; i < NDISKS; i++) {
+ for (j = 0; j < PAGE_SIZE; j++)
+ data[i][j] = rand();
+
+ dataptrs[i] = data[i];
+ }
+}
+
+static char disk_type(int d)
+{
+ switch (d) {
+ case NDISKS-2:
+ return 'P';
+ case NDISKS-1:
+ return 'Q';
+ default:
+ return 'D';
+ }
+}
+
+static int test_disks(int i, int j)
+{
+ int erra, errb;
+
+ memset(recovi, 0xf0, PAGE_SIZE);
+ memset(recovj, 0xba, PAGE_SIZE);
+
+ dataptrs[i] = recovi;
+ dataptrs[j] = recovj;
+
+ raid6_dual_recov(NDISKS, PAGE_SIZE, i, j, (void **)&dataptrs);
+
+ erra = memcmp(data[i], recovi, PAGE_SIZE);
+ errb = memcmp(data[j], recovj, PAGE_SIZE);
+
+ if (i < NDISKS-2 && j == NDISKS-1) {
+ /* We don't implement the DQ failure scenario, since it's
+ equivalent to a RAID-5 failure (XOR, then recompute Q) */
+ erra = errb = 0;
+ } else {
+ printf("algo=%-8s faila=%3d(%c) failb=%3d(%c) %s\n",
+ raid6_call.name,
+ i, disk_type(i),
+ j, disk_type(j),
+ (!erra && !errb) ? "OK" :
+ !erra ? "ERRB" :
+ !errb ? "ERRA" : "ERRAB");
+ }
+
+ dataptrs[i] = data[i];
+ dataptrs[j] = data[j];
+
+ return erra || errb;
+}
+
+int main(int argc, char *argv[])
+{
+ const struct raid6_calls *const *algo;
+ int i, j;
+ int err = 0;
+
+ makedata();
+
+ for (algo = raid6_algos; *algo; algo++) {
+ if (!(*algo)->valid || (*algo)->valid()) {
+ raid6_call = **algo;
+
+ /* Nuke syndromes */
+ memset(data[NDISKS-2], 0xee, 2*PAGE_SIZE);
+
+ /* Generate assumed good syndrome */
+ raid6_call.gen_syndrome(NDISKS, PAGE_SIZE,
+ (void **)&dataptrs);
+
+ for (i = 0; i < NDISKS-1; i++)
+ for (j = i+1; j < NDISKS; j++)
+ err += test_disks(i, j);
+ }
+ printf("\n");
+ }
+
+ printf("\n");
+ /* Pick the best algorithm test */
+ raid6_select_algo();
+
+ if (err)
+ printf("\n*** ERRORS FOUND ***\n");
+
+ return err;
+}
--- /dev/null
+
+# This filter requires one command line option of form -vN=n
+# where n must be a decimal number.
+#
+# Repeat each input line containing $$ n times, replacing $$ with 0...n-1.
+# Replace each $# with n, and each $* with a single $.
+
+BEGIN {
+ n = N + 0
+}
+{
+ if (/\$\$/) { rep = n } else { rep = 1 }
+ for (i = 0; i < rep; ++i) {
+ tmp = $0
+ gsub(/\$\$/, i, tmp)
+ gsub(/\$\#/, n, tmp)
+ gsub(/\$\*/, "$", tmp)
+ print tmp
+ }
+}
--- /dev/null
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ * Boston MA 02111-1307, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6/x86.h
+ *
+ * Definitions common to x86 and x86-64 RAID-6 code only
+ */
+
+#ifndef LINUX_RAID_RAID6X86_H
+#define LINUX_RAID_RAID6X86_H
+
+#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__)
+
+#ifdef __KERNEL__ /* Real code */
+
+#include <asm/i387.h>
+
+#else /* Dummy code for user space testing */
+
+static inline void kernel_fpu_begin(void)
+{
+}
+
+static inline void kernel_fpu_end(void)
+{
+}
+
+#define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */
+#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE and FXRSTOR instructions
+ * (fast save and restore) */
+#define X86_FEATURE_XMM (0*32+25) /* Streaming SIMD Extensions */
+#define X86_FEATURE_XMM2 (0*32+26) /* Streaming SIMD Extensions-2 */
+#define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */
+
+/* Should work well enough on modern CPUs for testing */
+static inline int boot_cpu_has(int flag)
+{
+ u32 eax = (flag >> 5) ? 0x80000001 : 1;
+ u32 edx;
+
+ asm volatile("cpuid"
+ : "+a" (eax), "=d" (edx)
+ : : "ecx", "ebx");
+
+ return (edx >> (flag & 31)) & 1;
+}
+
+#endif /* ndef __KERNEL__ */
+
+#endif
+#endif
#include <linux/slab.h>
#include <linux/scatterlist.h>
#include <linux/highmem.h>
+#include <linux/kmemleak.h>
/**
* sg_next - return the next scatterlist entry in a list
*/
static struct scatterlist *sg_kmalloc(unsigned int nents, gfp_t gfp_mask)
{
- if (nents == SG_MAX_SINGLE_ALLOC)
- return (struct scatterlist *) __get_free_page(gfp_mask);
- else
+ if (nents == SG_MAX_SINGLE_ALLOC) {
+ /*
+ * Kmemleak doesn't track page allocations as they are not
+ * commonly used (in a raw form) for kernel data structures.
+ * As we chain together a list of pages and then a normal
+ * kmalloc (tracked by kmemleak), in order to for that last
+ * allocation not to become decoupled (and thus a
+ * false-positive) we need to inform kmemleak of all the
+ * intermediate allocations.
+ */
+ void *ptr = (void *) __get_free_page(gfp_mask);
+ kmemleak_alloc(ptr, PAGE_SIZE, 1, gfp_mask);
+ return ptr;
+ } else
return kmalloc(nents * sizeof(struct scatterlist), gfp_mask);
}
static void sg_kfree(struct scatterlist *sg, unsigned int nents)
{
- if (nents == SG_MAX_SINGLE_ALLOC)
+ if (nents == SG_MAX_SINGLE_ALLOC) {
+ kmemleak_free(sg);
free_page((unsigned long) sg);
- else
+ } else
kfree(sg);
}
#include <linux/module.h>
#include <linux/writeback.h>
#include <linux/device.h>
+#include <trace/events/writeback.h>
static atomic_long_t bdi_seq = ATOMIC_LONG_INIT(0);
static int bdi_sync_supers(void *);
static void sync_supers_timer_fn(unsigned long);
-static void bdi_add_default_flusher_task(struct backing_dev_info *bdi);
-
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
static int bdi_debug_stats_show(struct seq_file *m, void *v)
{
struct backing_dev_info *bdi = m->private;
- struct bdi_writeback *wb;
+ struct bdi_writeback *wb = &bdi->wb;
unsigned long background_thresh;
unsigned long dirty_thresh;
unsigned long bdi_thresh;
unsigned long nr_dirty, nr_io, nr_more_io, nr_wb;
struct inode *inode;
- /*
- * inode lock is enough here, the bdi->wb_list is protected by
- * RCU on the reader side
- */
nr_wb = nr_dirty = nr_io = nr_more_io = 0;
spin_lock(&inode_lock);
- list_for_each_entry(wb, &bdi->wb_list, list) {
- nr_wb++;
- list_for_each_entry(inode, &wb->b_dirty, i_list)
- nr_dirty++;
- list_for_each_entry(inode, &wb->b_io, i_list)
- nr_io++;
- list_for_each_entry(inode, &wb->b_more_io, i_list)
- nr_more_io++;
- }
+ list_for_each_entry(inode, &wb->b_dirty, i_list)
+ nr_dirty++;
+ list_for_each_entry(inode, &wb->b_io, i_list)
+ nr_io++;
+ list_for_each_entry(inode, &wb->b_more_io, i_list)
+ nr_more_io++;
spin_unlock(&inode_lock);
- get_dirty_limits(&background_thresh, &dirty_thresh, &bdi_thresh, bdi);
+ global_dirty_limits(&background_thresh, &dirty_thresh);
+ bdi_thresh = bdi_dirty_limit(bdi, dirty_thresh);
#define K(x) ((x) << (PAGE_SHIFT - 10))
seq_printf(m,
"BdiDirtyThresh: %8lu kB\n"
"DirtyThresh: %8lu kB\n"
"BackgroundThresh: %8lu kB\n"
- "WritebackThreads: %8lu\n"
"b_dirty: %8lu\n"
"b_io: %8lu\n"
"b_more_io: %8lu\n"
"bdi_list: %8u\n"
- "state: %8lx\n"
- "wb_list: %8u\n",
+ "state: %8lx\n",
(unsigned long) K(bdi_stat(bdi, BDI_WRITEBACK)),
(unsigned long) K(bdi_stat(bdi, BDI_RECLAIMABLE)),
K(bdi_thresh), K(dirty_thresh),
- K(background_thresh), nr_wb, nr_dirty, nr_io, nr_more_io,
- !list_empty(&bdi->bdi_list), bdi->state,
- !list_empty(&bdi->wb_list));
+ K(background_thresh), nr_dirty, nr_io, nr_more_io,
+ !list_empty(&bdi->bdi_list), bdi->state);
#undef K
return 0;
sync_supers_tsk = kthread_run(bdi_sync_supers, NULL, "sync_supers");
BUG_ON(IS_ERR(sync_supers_tsk));
- init_timer(&sync_supers_timer);
setup_timer(&sync_supers_timer, sync_supers_timer_fn, 0);
bdi_arm_supers_timer();
}
subsys_initcall(default_bdi_init);
-static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
-{
- memset(wb, 0, sizeof(*wb));
-
- wb->bdi = bdi;
- wb->last_old_flush = jiffies;
- INIT_LIST_HEAD(&wb->b_dirty);
- INIT_LIST_HEAD(&wb->b_io);
- INIT_LIST_HEAD(&wb->b_more_io);
-}
-
-static void bdi_task_init(struct backing_dev_info *bdi,
- struct bdi_writeback *wb)
-{
- struct task_struct *tsk = current;
-
- spin_lock(&bdi->wb_lock);
- list_add_tail_rcu(&wb->list, &bdi->wb_list);
- spin_unlock(&bdi->wb_lock);
-
- tsk->flags |= PF_FLUSHER | PF_SWAPWRITE;
- set_freezable();
-
- /*
- * Our parent may run at a different priority, just set us to normal
- */
- set_user_nice(tsk, 0);
-}
-
-static int bdi_start_fn(void *ptr)
-{
- struct bdi_writeback *wb = ptr;
- struct backing_dev_info *bdi = wb->bdi;
- int ret;
-
- /*
- * Add us to the active bdi_list
- */
- spin_lock_bh(&bdi_lock);
- list_add_rcu(&bdi->bdi_list, &bdi_list);
- spin_unlock_bh(&bdi_lock);
-
- bdi_task_init(bdi, wb);
-
- /*
- * Clear pending bit and wakeup anybody waiting to tear us down
- */
- clear_bit(BDI_pending, &bdi->state);
- smp_mb__after_clear_bit();
- wake_up_bit(&bdi->state, BDI_pending);
-
- ret = bdi_writeback_task(wb);
-
- /*
- * Remove us from the list
- */
- spin_lock(&bdi->wb_lock);
- list_del_rcu(&wb->list);
- spin_unlock(&bdi->wb_lock);
-
- /*
- * Flush any work that raced with us exiting. No new work
- * will be added, since this bdi isn't discoverable anymore.
- */
- if (!list_empty(&bdi->work_list))
- wb_do_writeback(wb, 1);
-
- wb->task = NULL;
- return ret;
-}
-
int bdi_has_dirty_io(struct backing_dev_info *bdi)
{
return wb_has_dirty_io(&bdi->wb);
}
/*
- * kupdated() used to do this. We cannot do it from the bdi_forker_task()
+ * kupdated() used to do this. We cannot do it from the bdi_forker_thread()
* or we risk deadlocking on ->s_umount. The longer term solution would be
* to implement sync_supers_bdi() or similar and simply do it from the
- * bdi writeback tasks individually.
+ * bdi writeback thread individually.
*/
static int bdi_sync_supers(void *unused)
{
bdi_arm_supers_timer();
}
-static int bdi_forker_task(void *ptr)
+static void wakeup_timer_fn(unsigned long data)
+{
+ struct backing_dev_info *bdi = (struct backing_dev_info *)data;
+
+ spin_lock_bh(&bdi->wb_lock);
+ if (bdi->wb.task) {
+ trace_writeback_wake_thread(bdi);
+ wake_up_process(bdi->wb.task);
+ } else {
+ /*
+ * When bdi tasks are inactive for long time, they are killed.
+ * In this case we have to wake-up the forker thread which
+ * should create and run the bdi thread.
+ */
+ trace_writeback_wake_forker_thread(bdi);
+ wake_up_process(default_backing_dev_info.wb.task);
+ }
+ spin_unlock_bh(&bdi->wb_lock);
+}
+
+/*
+ * This function is used when the first inode for this bdi is marked dirty. It
+ * wakes-up the corresponding bdi thread which should then take care of the
+ * periodic background write-out of dirty inodes. Since the write-out would
+ * starts only 'dirty_writeback_interval' centisecs from now anyway, we just
+ * set up a timer which wakes the bdi thread up later.
+ *
+ * Note, we wouldn't bother setting up the timer, but this function is on the
+ * fast-path (used by '__mark_inode_dirty()'), so we save few context switches
+ * by delaying the wake-up.
+ */
+void bdi_wakeup_thread_delayed(struct backing_dev_info *bdi)
+{
+ unsigned long timeout;
+
+ timeout = msecs_to_jiffies(dirty_writeback_interval * 10);
+ mod_timer(&bdi->wb.wakeup_timer, jiffies + timeout);
+}
+
+/*
+ * Calculate the longest interval (jiffies) bdi threads are allowed to be
+ * inactive.
+ */
+static unsigned long bdi_longest_inactive(void)
+{
+ unsigned long interval;
+
+ interval = msecs_to_jiffies(dirty_writeback_interval * 10);
+ return max(5UL * 60 * HZ, interval);
+}
+
+static int bdi_forker_thread(void *ptr)
{
struct bdi_writeback *me = ptr;
- bdi_task_init(me->bdi, me);
+ current->flags |= PF_FLUSHER | PF_SWAPWRITE;
+ set_freezable();
+
+ /*
+ * Our parent may run at a different priority, just set us to normal
+ */
+ set_user_nice(current, 0);
for (;;) {
- struct backing_dev_info *bdi, *tmp;
- struct bdi_writeback *wb;
+ struct task_struct *task = NULL;
+ struct backing_dev_info *bdi;
+ enum {
+ NO_ACTION, /* Nothing to do */
+ FORK_THREAD, /* Fork bdi thread */
+ KILL_THREAD, /* Kill inactive bdi thread */
+ } action = NO_ACTION;
/*
* Temporary measure, we want to make sure we don't see
* dirty data on the default backing_dev_info
*/
- if (wb_has_dirty_io(me) || !list_empty(&me->bdi->work_list))
+ if (wb_has_dirty_io(me) || !list_empty(&me->bdi->work_list)) {
+ del_timer(&me->wakeup_timer);
wb_do_writeback(me, 0);
+ }
spin_lock_bh(&bdi_lock);
+ set_current_state(TASK_INTERRUPTIBLE);
- /*
- * Check if any existing bdi's have dirty data without
- * a thread registered. If so, set that up.
- */
- list_for_each_entry_safe(bdi, tmp, &bdi_list, bdi_list) {
- if (bdi->wb.task)
- continue;
- if (list_empty(&bdi->work_list) &&
- !bdi_has_dirty_io(bdi))
+ list_for_each_entry(bdi, &bdi_list, bdi_list) {
+ bool have_dirty_io;
+
+ if (!bdi_cap_writeback_dirty(bdi) ||
+ bdi_cap_flush_forker(bdi))
continue;
- bdi_add_default_flusher_task(bdi);
- }
+ WARN(!test_bit(BDI_registered, &bdi->state),
+ "bdi %p/%s is not registered!\n", bdi, bdi->name);
- set_current_state(TASK_INTERRUPTIBLE);
+ have_dirty_io = !list_empty(&bdi->work_list) ||
+ wb_has_dirty_io(&bdi->wb);
- if (list_empty(&bdi_pending_list)) {
- unsigned long wait;
+ /*
+ * If the bdi has work to do, but the thread does not
+ * exist - create it.
+ */
+ if (!bdi->wb.task && have_dirty_io) {
+ /*
+ * Set the pending bit - if someone will try to
+ * unregister this bdi - it'll wait on this bit.
+ */
+ set_bit(BDI_pending, &bdi->state);
+ action = FORK_THREAD;
+ break;
+ }
+
+ spin_lock(&bdi->wb_lock);
+
+ /*
+ * If there is no work to do and the bdi thread was
+ * inactive long enough - kill it. The wb_lock is taken
+ * to make sure no-one adds more work to this bdi and
+ * wakes the bdi thread up.
+ */
+ if (bdi->wb.task && !have_dirty_io &&
+ time_after(jiffies, bdi->wb.last_active +
+ bdi_longest_inactive())) {
+ task = bdi->wb.task;
+ bdi->wb.task = NULL;
+ spin_unlock(&bdi->wb_lock);
+ set_bit(BDI_pending, &bdi->state);
+ action = KILL_THREAD;
+ break;
+ }
+ spin_unlock(&bdi->wb_lock);
+ }
+ spin_unlock_bh(&bdi_lock);
- spin_unlock_bh(&bdi_lock);
- wait = msecs_to_jiffies(dirty_writeback_interval * 10);
- if (wait)
- schedule_timeout(wait);
+ /* Keep working if default bdi still has things to do */
+ if (!list_empty(&me->bdi->work_list))
+ __set_current_state(TASK_RUNNING);
+
+ switch (action) {
+ case FORK_THREAD:
+ __set_current_state(TASK_RUNNING);
+ task = kthread_run(bdi_writeback_thread, &bdi->wb, "flush-%s",
+ dev_name(bdi->dev));
+ if (IS_ERR(task)) {
+ /*
+ * If thread creation fails, force writeout of
+ * the bdi from the thread.
+ */
+ bdi_flush_io(bdi);
+ } else {
+ /*
+ * The spinlock makes sure we do not lose
+ * wake-ups when racing with 'bdi_queue_work()'.
+ */
+ spin_lock_bh(&bdi->wb_lock);
+ bdi->wb.task = task;
+ spin_unlock_bh(&bdi->wb_lock);
+ }
+ break;
+
+ case KILL_THREAD:
+ __set_current_state(TASK_RUNNING);
+ kthread_stop(task);
+ break;
+
+ case NO_ACTION:
+ if (!wb_has_dirty_io(me) || !dirty_writeback_interval)
+ /*
+ * There are no dirty data. The only thing we
+ * should now care about is checking for
+ * inactive bdi threads and killing them. Thus,
+ * let's sleep for longer time, save energy and
+ * be friendly for battery-driven devices.
+ */
+ schedule_timeout(bdi_longest_inactive());
else
- schedule();
+ schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10));
try_to_freeze();
+ /* Back to the main loop */
continue;
}
- __set_current_state(TASK_RUNNING);
-
- /*
- * This is our real job - check for pending entries in
- * bdi_pending_list, and create the tasks that got added
- */
- bdi = list_entry(bdi_pending_list.next, struct backing_dev_info,
- bdi_list);
- list_del_init(&bdi->bdi_list);
- spin_unlock_bh(&bdi_lock);
-
- wb = &bdi->wb;
- wb->task = kthread_run(bdi_start_fn, wb, "flush-%s",
- dev_name(bdi->dev));
/*
- * If task creation fails, then readd the bdi to
- * the pending list and force writeout of the bdi
- * from this forker thread. That will free some memory
- * and we can try again.
+ * Clear pending bit and wakeup anybody waiting to tear us down.
*/
- if (IS_ERR(wb->task)) {
- wb->task = NULL;
-
- /*
- * Add this 'bdi' to the back, so we get
- * a chance to flush other bdi's to free
- * memory.
- */
- spin_lock_bh(&bdi_lock);
- list_add_tail(&bdi->bdi_list, &bdi_pending_list);
- spin_unlock_bh(&bdi_lock);
-
- bdi_flush_io(bdi);
- }
+ clear_bit(BDI_pending, &bdi->state);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&bdi->state, BDI_pending);
}
return 0;
}
-static void bdi_add_to_pending(struct rcu_head *head)
-{
- struct backing_dev_info *bdi;
-
- bdi = container_of(head, struct backing_dev_info, rcu_head);
- INIT_LIST_HEAD(&bdi->bdi_list);
-
- spin_lock(&bdi_lock);
- list_add_tail(&bdi->bdi_list, &bdi_pending_list);
- spin_unlock(&bdi_lock);
-
- /*
- * We are now on the pending list, wake up bdi_forker_task()
- * to finish the job and add us back to the active bdi_list
- */
- wake_up_process(default_backing_dev_info.wb.task);
-}
-
-/*
- * Add the default flusher task that gets created for any bdi
- * that has dirty data pending writeout
- */
-void static bdi_add_default_flusher_task(struct backing_dev_info *bdi)
-{
- if (!bdi_cap_writeback_dirty(bdi))
- return;
-
- if (WARN_ON(!test_bit(BDI_registered, &bdi->state))) {
- printk(KERN_ERR "bdi %p/%s is not registered!\n",
- bdi, bdi->name);
- return;
- }
-
- /*
- * Check with the helper whether to proceed adding a task. Will only
- * abort if we two or more simultanous calls to
- * bdi_add_default_flusher_task() occured, further additions will block
- * waiting for previous additions to finish.
- */
- if (!test_and_set_bit(BDI_pending, &bdi->state)) {
- list_del_rcu(&bdi->bdi_list);
-
- /*
- * We must wait for the current RCU period to end before
- * moving to the pending list. So schedule that operation
- * from an RCU callback.
- */
- call_rcu(&bdi->rcu_head, bdi_add_to_pending);
- }
-}
-
/*
* Remove bdi from bdi_list, and ensure that it is no longer visible
*/
const char *fmt, ...)
{
va_list args;
- int ret = 0;
struct device *dev;
if (bdi->dev) /* The driver needs to use separate queues per device */
- goto exit;
+ return 0;
va_start(args, fmt);
dev = device_create_vargs(bdi_class, parent, MKDEV(0, 0), bdi, fmt, args);
va_end(args);
- if (IS_ERR(dev)) {
- ret = PTR_ERR(dev);
- goto exit;
- }
-
- spin_lock_bh(&bdi_lock);
- list_add_tail_rcu(&bdi->bdi_list, &bdi_list);
- spin_unlock_bh(&bdi_lock);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
bdi->dev = dev;
if (bdi_cap_flush_forker(bdi)) {
struct bdi_writeback *wb = &bdi->wb;
- wb->task = kthread_run(bdi_forker_task, wb, "bdi-%s",
+ wb->task = kthread_run(bdi_forker_thread, wb, "bdi-%s",
dev_name(dev));
- if (IS_ERR(wb->task)) {
- wb->task = NULL;
- ret = -ENOMEM;
-
- bdi_remove_from_list(bdi);
- goto exit;
- }
+ if (IS_ERR(wb->task))
+ return PTR_ERR(wb->task);
}
bdi_debug_register(bdi, dev_name(dev));
set_bit(BDI_registered, &bdi->state);
-exit:
- return ret;
+
+ spin_lock_bh(&bdi_lock);
+ list_add_tail_rcu(&bdi->bdi_list, &bdi_list);
+ spin_unlock_bh(&bdi_lock);
+
+ trace_writeback_bdi_register(bdi);
+ return 0;
}
EXPORT_SYMBOL(bdi_register);
*/
static void bdi_wb_shutdown(struct backing_dev_info *bdi)
{
- struct bdi_writeback *wb;
-
if (!bdi_cap_writeback_dirty(bdi))
return;
/*
- * If setup is pending, wait for that to complete first
+ * Make sure nobody finds us on the bdi_list anymore
*/
- wait_on_bit(&bdi->state, BDI_pending, bdi_sched_wait,
- TASK_UNINTERRUPTIBLE);
+ bdi_remove_from_list(bdi);
/*
- * Make sure nobody finds us on the bdi_list anymore
+ * If setup is pending, wait for that to complete first
*/
- bdi_remove_from_list(bdi);
+ wait_on_bit(&bdi->state, BDI_pending, bdi_sched_wait,
+ TASK_UNINTERRUPTIBLE);
/*
- * Finally, kill the kernel threads. We don't need to be RCU
+ * Finally, kill the kernel thread. We don't need to be RCU
* safe anymore, since the bdi is gone from visibility. Force
* unfreeze of the thread before calling kthread_stop(), otherwise
* it would never exet if it is currently stuck in the refrigerator.
*/
- list_for_each_entry(wb, &bdi->wb_list, list) {
- thaw_process(wb->task);
- kthread_stop(wb->task);
+ if (bdi->wb.task) {
+ thaw_process(bdi->wb.task);
+ kthread_stop(bdi->wb.task);
}
}
void bdi_unregister(struct backing_dev_info *bdi)
{
if (bdi->dev) {
+ trace_writeback_bdi_unregister(bdi);
bdi_prune_sb(bdi);
+ del_timer_sync(&bdi->wb.wakeup_timer);
if (!bdi_cap_flush_forker(bdi))
bdi_wb_shutdown(bdi);
}
EXPORT_SYMBOL(bdi_unregister);
+static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
+{
+ memset(wb, 0, sizeof(*wb));
+
+ wb->bdi = bdi;
+ wb->last_old_flush = jiffies;
+ INIT_LIST_HEAD(&wb->b_dirty);
+ INIT_LIST_HEAD(&wb->b_io);
+ INIT_LIST_HEAD(&wb->b_more_io);
+ setup_timer(&wb->wakeup_timer, wakeup_timer_fn, (unsigned long)bdi);
+}
+
int bdi_init(struct backing_dev_info *bdi)
{
int i, err;
bdi->max_prop_frac = PROP_FRAC_BASE;
spin_lock_init(&bdi->wb_lock);
INIT_LIST_HEAD(&bdi->bdi_list);
- INIT_LIST_HEAD(&bdi->wb_list);
INIT_LIST_HEAD(&bdi->work_list);
bdi_wb_init(&bdi->wb, bdi);
#include <linux/bootmem.h>
#include <linux/sysfs.h>
#include <linux/slab.h>
+#include <linux/rmap.h>
+#include <linux/swap.h>
+#include <linux/swapops.h>
#include <asm/page.h>
#include <asm/pgtable.h>
(vma->vm_pgoff >> huge_page_order(h));
}
+pgoff_t linear_hugepage_index(struct vm_area_struct *vma,
+ unsigned long address)
+{
+ return vma_hugecache_offset(hstate_vma(vma), vma, address);
+}
+
/*
* Return the size of the pages allocated when backing a VMA. In the majority
* cases this will be same size as used by the page table entries.
set_page_private(page, 0);
page->mapping = NULL;
BUG_ON(page_count(page));
+ BUG_ON(page_mapcount(page));
INIT_LIST_HEAD(&page->lru);
spin_lock(&hugetlb_lock);
return dtor == free_huge_page;
}
+EXPORT_SYMBOL_GPL(PageHuge);
+
static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
{
struct page *page;
entry = huge_ptep_get(src_pte);
ptepage = pte_page(entry);
get_page(ptepage);
+ page_dup_rmap(ptepage);
set_huge_pte_at(dst, addr, dst_pte, entry);
}
spin_unlock(&src->page_table_lock);
return -ENOMEM;
}
+static int is_hugetlb_entry_hwpoisoned(pte_t pte)
+{
+ swp_entry_t swp;
+
+ if (huge_pte_none(pte) || pte_present(pte))
+ return 0;
+ swp = pte_to_swp_entry(pte);
+ if (non_swap_entry(swp) && is_hwpoison_entry(swp)) {
+ return 1;
+ } else
+ return 0;
+}
+
void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end, struct page *ref_page)
{
if (huge_pte_none(pte))
continue;
+ /*
+ * HWPoisoned hugepage is already unmapped and dropped reference
+ */
+ if (unlikely(is_hugetlb_entry_hwpoisoned(pte)))
+ continue;
+
page = pte_page(pte);
if (pte_dirty(pte))
set_page_dirty(page);
flush_tlb_range(vma, start, end);
mmu_notifier_invalidate_range_end(mm, start, end);
list_for_each_entry_safe(page, tmp, &page_list, lru) {
+ page_remove_rmap(page);
list_del(&page->lru);
put_page(page);
}
return 1;
}
+/*
+ * Hugetlb_cow() should be called with page lock of the original hugepage held.
+ */
static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long address, pte_t *ptep, pte_t pte,
struct page *pagecache_page)
retry_avoidcopy:
/* If no-one else is actually using this page, avoid the copy
* and just make the page writable */
- avoidcopy = (page_count(old_page) == 1);
+ avoidcopy = (page_mapcount(old_page) == 1);
if (avoidcopy) {
+ if (!trylock_page(old_page)) {
+ if (PageAnon(old_page))
+ page_move_anon_rmap(old_page, vma, address);
+ } else
+ unlock_page(old_page);
set_huge_ptep_writable(vma, address, ptep);
return 0;
}
return -PTR_ERR(new_page);
}
+ /*
+ * When the original hugepage is shared one, it does not have
+ * anon_vma prepared.
+ */
+ if (unlikely(anon_vma_prepare(vma)))
+ return VM_FAULT_OOM;
+
copy_huge_page(new_page, old_page, address, vma);
__SetPageUptodate(new_page);
huge_ptep_clear_flush(vma, address, ptep);
set_huge_pte_at(mm, address, ptep,
make_huge_pte(vma, new_page, 1));
+ page_remove_rmap(old_page);
+ hugepage_add_anon_rmap(new_page, vma, address);
/* Make the old page be freed below */
new_page = old_page;
mmu_notifier_invalidate_range_end(mm,
spin_lock(&inode->i_lock);
inode->i_blocks += blocks_per_huge_page(h);
spin_unlock(&inode->i_lock);
+ page_dup_rmap(page);
} else {
lock_page(page);
- page->mapping = HUGETLB_POISON;
+ if (unlikely(anon_vma_prepare(vma))) {
+ ret = VM_FAULT_OOM;
+ goto backout_unlocked;
+ }
+ hugepage_add_new_anon_rmap(page, vma, address);
}
+ } else {
+ page_dup_rmap(page);
+ }
+
+ /*
+ * Since memory error handler replaces pte into hwpoison swap entry
+ * at the time of error handling, a process which reserved but not have
+ * the mapping to the error hugepage does not have hwpoison swap entry.
+ * So we need to block accesses from such a process by checking
+ * PG_hwpoison bit here.
+ */
+ if (unlikely(PageHWPoison(page))) {
+ ret = VM_FAULT_HWPOISON;
+ goto backout_unlocked;
}
/*
pte_t *ptep;
pte_t entry;
int ret;
+ struct page *page = NULL;
struct page *pagecache_page = NULL;
static DEFINE_MUTEX(hugetlb_instantiation_mutex);
struct hstate *h = hstate_vma(vma);
+ ptep = huge_pte_offset(mm, address);
+ if (ptep) {
+ entry = huge_ptep_get(ptep);
+ if (unlikely(is_hugetlb_entry_hwpoisoned(entry)))
+ return VM_FAULT_HWPOISON;
+ }
+
ptep = huge_pte_alloc(mm, address, huge_page_size(h));
if (!ptep)
return VM_FAULT_OOM;
vma, address);
}
+ if (!pagecache_page) {
+ page = pte_page(entry);
+ lock_page(page);
+ }
+
spin_lock(&mm->page_table_lock);
/* Check for a racing update before calling hugetlb_cow */
if (unlikely(!pte_same(entry, huge_ptep_get(ptep))))
if (pagecache_page) {
unlock_page(pagecache_page);
put_page(pagecache_page);
+ } else {
+ unlock_page(page);
}
out_mutex:
hugetlb_put_quota(inode->i_mapping, (chg - freed));
hugetlb_acct_memory(h, -(chg - freed));
}
+
+/*
+ * This function is called from memory failure code.
+ * Assume the caller holds page lock of the head page.
+ */
+void __isolate_hwpoisoned_huge_page(struct page *hpage)
+{
+ struct hstate *h = page_hstate(hpage);
+ int nid = page_to_nid(hpage);
+
+ spin_lock(&hugetlb_lock);
+ list_del(&hpage->lru);
+ h->free_huge_pages--;
+ h->free_huge_pages_node[nid]--;
+ spin_unlock(&hugetlb_lock);
+}
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/pagemap.h>
+#include <linux/hugetlb.h>
#include "internal.h"
static struct dentry *hwpoison_dir;
{
unsigned long pfn = val;
struct page *p;
+ struct page *hpage;
int err;
if (!capable(CAP_SYS_ADMIN))
return -ENXIO;
p = pfn_to_page(pfn);
+ hpage = compound_head(p);
/*
* This implies unable to support free buddy pages.
*/
- if (!get_page_unless_zero(p))
+ if (!get_page_unless_zero(hpage))
return 0;
- if (!PageLRU(p))
+ if (!PageLRU(p) && !PageHuge(p))
shake_page(p, 0);
/*
* This implies unable to support non-LRU pages.
*/
- if (!PageLRU(p))
+ if (!PageLRU(p) && !PageHuge(p))
return 0;
/*
* We temporarily take page lock for try_get_mem_cgroup_from_page().
* __memory_failure() will redo the check reliably inside page lock.
*/
- lock_page(p);
- err = hwpoison_filter(p);
- unlock_page(p);
+ lock_page(hpage);
+ err = hwpoison_filter(hpage);
+ unlock_page(hpage);
if (err)
return 0;
static int kmemleak_stack_scan = 1;
/* protects the memory scanning, parameters and debug/kmemleak file access */
static DEFINE_MUTEX(scan_mutex);
+/* setting kmemleak=on, will set this var, skipping the disable */
+static int kmemleak_skip_disable;
+
/*
* Early object allocation/freeing logging. Kmemleak is initialized after the
object = prio_tree_entry(node, struct kmemleak_object,
tree_node);
if (!alias && object->pointer != ptr) {
- kmemleak_warn("Found object by alias");
+ pr_warning("Found object by alias at 0x%08lx\n", ptr);
+ dump_stack();
+ dump_object_info(object);
object = NULL;
}
} else
}
/*
- * Make a object permanently as gray-colored so that it can no longer be
+ * Mark an object permanently as gray-colored so that it can no longer be
* reported as a leak. This is used in general to mark a false positive.
*/
static void make_gray_object(unsigned long ptr)
rcu_read_unlock();
}
-/*
- * Memory allocation function callback. This function is called from the
- * kernel allocators when a new block is allocated (kmem_cache_alloc, kmalloc,
- * vmalloc etc.).
+/**
+ * kmemleak_alloc - register a newly allocated object
+ * @ptr: pointer to beginning of the object
+ * @size: size of the object
+ * @min_count: minimum number of references to this object. If during memory
+ * scanning a number of references less than @min_count is found,
+ * the object is reported as a memory leak. If @min_count is 0,
+ * the object is never reported as a leak. If @min_count is -1,
+ * the object is ignored (not scanned and not reported as a leak)
+ * @gfp: kmalloc() flags used for kmemleak internal memory allocations
+ *
+ * This function is called from the kernel allocators when a new object
+ * (memory block) is allocated (kmem_cache_alloc, kmalloc, vmalloc etc.).
*/
void __ref kmemleak_alloc(const void *ptr, size_t size, int min_count,
gfp_t gfp)
}
EXPORT_SYMBOL_GPL(kmemleak_alloc);
-/*
- * Memory freeing function callback. This function is called from the kernel
- * allocators when a block is freed (kmem_cache_free, kfree, vfree etc.).
+/**
+ * kmemleak_free - unregister a previously registered object
+ * @ptr: pointer to beginning of the object
+ *
+ * This function is called from the kernel allocators when an object (memory
+ * block) is freed (kmem_cache_free, kfree, vfree etc.).
*/
void __ref kmemleak_free(const void *ptr)
{
}
EXPORT_SYMBOL_GPL(kmemleak_free);
-/*
- * Partial memory freeing function callback. This function is usually called
- * from bootmem allocator when (part of) a memory block is freed.
+/**
+ * kmemleak_free_part - partially unregister a previously registered object
+ * @ptr: pointer to the beginning or inside the object. This also
+ * represents the start of the range to be freed
+ * @size: size to be unregistered
+ *
+ * This function is called when only a part of a memory block is freed
+ * (usually from the bootmem allocator).
*/
void __ref kmemleak_free_part(const void *ptr, size_t size)
{
}
EXPORT_SYMBOL_GPL(kmemleak_free_part);
-/*
- * Mark an already allocated memory block as a false positive. This will cause
- * the block to no longer be reported as leak and always be scanned.
+/**
+ * kmemleak_not_leak - mark an allocated object as false positive
+ * @ptr: pointer to beginning of the object
+ *
+ * Calling this function on an object will cause the memory block to no longer
+ * be reported as leak and always be scanned.
*/
void __ref kmemleak_not_leak(const void *ptr)
{
}
EXPORT_SYMBOL(kmemleak_not_leak);
-/*
- * Ignore a memory block. This is usually done when it is known that the
- * corresponding block is not a leak and does not contain any references to
- * other allocated memory blocks.
+/**
+ * kmemleak_ignore - ignore an allocated object
+ * @ptr: pointer to beginning of the object
+ *
+ * Calling this function on an object will cause the memory block to be
+ * ignored (not scanned and not reported as a leak). This is usually done when
+ * it is known that the corresponding block is not a leak and does not contain
+ * any references to other allocated memory blocks.
*/
void __ref kmemleak_ignore(const void *ptr)
{
}
EXPORT_SYMBOL(kmemleak_ignore);
-/*
- * Limit the range to be scanned in an allocated memory block.
+/**
+ * kmemleak_scan_area - limit the range to be scanned in an allocated object
+ * @ptr: pointer to beginning or inside the object. This also
+ * represents the start of the scan area
+ * @size: size of the scan area
+ * @gfp: kmalloc() flags used for kmemleak internal memory allocations
+ *
+ * This function is used when it is known that only certain parts of an object
+ * contain references to other objects. Kmemleak will only scan these areas
+ * reducing the number false negatives.
*/
void __ref kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp)
{
}
EXPORT_SYMBOL(kmemleak_scan_area);
-/*
- * Inform kmemleak not to scan the given memory block.
+/**
+ * kmemleak_no_scan - do not scan an allocated object
+ * @ptr: pointer to beginning of the object
+ *
+ * This function notifies kmemleak not to scan the given memory block. Useful
+ * in situations where it is known that the given object does not contain any
+ * references to other objects. Kmemleak will not scan such objects reducing
+ * the number of false negatives.
*/
void __ref kmemleak_no_scan(const void *ptr)
{
return -EINVAL;
if (strcmp(str, "off") == 0)
kmemleak_disable();
- else if (strcmp(str, "on") != 0)
+ else if (strcmp(str, "on") == 0)
+ kmemleak_skip_disable = 1;
+ else
return -EINVAL;
return 0;
}
int i;
unsigned long flags;
+#ifdef CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF
+ if (!kmemleak_skip_disable) {
+ kmemleak_disable();
+ return;
+ }
+#endif
+
jiffies_min_age = msecs_to_jiffies(MSECS_MIN_AGE);
jiffies_scan_wait = msecs_to_jiffies(SECS_SCAN_WAIT * 1000);
#include <linux/mm_inline.h>
#include <linux/page_cgroup.h>
#include <linux/cpu.h>
+#include <linux/oom.h>
#include "internal.h"
#include <asm/uaccess.h>
/* "mc" and its members are protected by cgroup_mutex */
static struct move_charge_struct {
+ spinlock_t lock; /* for from, to, moving_task */
struct mem_cgroup *from;
struct mem_cgroup *to;
unsigned long precharge;
struct task_struct *moving_task; /* a task moving charges */
wait_queue_head_t waitq; /* a waitq for other context */
} mc = {
+ .lock = __SPIN_LOCK_UNLOCKED(mc.lock),
.waitq = __WAIT_QUEUE_HEAD_INITIALIZER(mc.waitq),
};
{
int ret;
struct mem_cgroup *curr = NULL;
+ struct task_struct *p;
- task_lock(task);
- rcu_read_lock();
- curr = try_get_mem_cgroup_from_mm(task->mm);
- rcu_read_unlock();
- task_unlock(task);
+ p = find_lock_task_mm(task);
+ if (!p)
+ return 0;
+ curr = try_get_mem_cgroup_from_mm(p->mm);
+ task_unlock(p);
if (!curr)
return 0;
/*
struct zone *zone,
enum lru_list lru)
{
- int nid = zone->zone_pgdat->node_id;
+ int nid = zone_to_nid(zone);
int zid = zone_idx(zone);
struct mem_cgroup_per_zone *mz = mem_cgroup_zoneinfo(memcg, nid, zid);
struct zone_reclaim_stat *mem_cgroup_get_reclaim_stat(struct mem_cgroup *memcg,
struct zone *zone)
{
- int nid = zone->zone_pgdat->node_id;
+ int nid = zone_to_nid(zone);
int zid = zone_idx(zone);
struct mem_cgroup_per_zone *mz = mem_cgroup_zoneinfo(memcg, nid, zid);
LIST_HEAD(pc_list);
struct list_head *src;
struct page_cgroup *pc, *tmp;
- int nid = z->zone_pgdat->node_id;
+ int nid = zone_to_nid(z);
int zid = zone_idx(z);
struct mem_cgroup_per_zone *mz;
int lru = LRU_FILE * file + active;
return swappiness;
}
+/* A routine for testing mem is not under move_account */
+
+static bool mem_cgroup_under_move(struct mem_cgroup *mem)
+{
+ struct mem_cgroup *from;
+ struct mem_cgroup *to;
+ bool ret = false;
+ /*
+ * Unlike task_move routines, we access mc.to, mc.from not under
+ * mutual exclusion by cgroup_mutex. Here, we take spinlock instead.
+ */
+ spin_lock(&mc.lock);
+ from = mc.from;
+ to = mc.to;
+ if (!from)
+ goto unlock;
+ if (from == mem || to == mem
+ || (mem->use_hierarchy && css_is_ancestor(&from->css, &mem->css))
+ || (mem->use_hierarchy && css_is_ancestor(&to->css, &mem->css)))
+ ret = true;
+unlock:
+ spin_unlock(&mc.lock);
+ return ret;
+}
+
+static bool mem_cgroup_wait_acct_move(struct mem_cgroup *mem)
+{
+ if (mc.moving_task && current != mc.moving_task) {
+ if (mem_cgroup_under_move(mem)) {
+ DEFINE_WAIT(wait);
+ prepare_to_wait(&mc.waitq, &wait, TASK_INTERRUPTIBLE);
+ /* moving charge context might have finished. */
+ if (mc.moving_task)
+ schedule();
+ finish_wait(&mc.waitq, &wait);
+ return true;
+ }
+ }
+ return false;
+}
+
static int mem_cgroup_count_children_cb(struct mem_cgroup *mem, void *data)
{
int *val = data;
/* we use swappiness of local cgroup */
if (check_soft)
ret = mem_cgroup_shrink_node_zone(victim, gfp_mask,
- noswap, get_swappiness(victim), zone,
- zone->zone_pgdat->node_id);
+ noswap, get_swappiness(victim), zone);
else
ret = try_to_free_mem_cgroup_pages(victim, gfp_mask,
noswap, get_swappiness(victim));
static void memcg_oom_recover(struct mem_cgroup *mem)
{
- if (atomic_read(&mem->oom_lock))
+ if (mem && atomic_read(&mem->oom_lock))
memcg_wakeup_oom(mem);
}
return NOTIFY_OK;
}
+
+/* See __mem_cgroup_try_charge() for details */
+enum {
+ CHARGE_OK, /* success */
+ CHARGE_RETRY, /* need to retry but retry is not bad */
+ CHARGE_NOMEM, /* we can't do more. return -ENOMEM */
+ CHARGE_WOULDBLOCK, /* GFP_WAIT wasn't set and no enough res. */
+ CHARGE_OOM_DIE, /* the current is killed because of OOM */
+};
+
+static int __mem_cgroup_do_charge(struct mem_cgroup *mem, gfp_t gfp_mask,
+ int csize, bool oom_check)
+{
+ struct mem_cgroup *mem_over_limit;
+ struct res_counter *fail_res;
+ unsigned long flags = 0;
+ int ret;
+
+ ret = res_counter_charge(&mem->res, csize, &fail_res);
+
+ if (likely(!ret)) {
+ if (!do_swap_account)
+ return CHARGE_OK;
+ ret = res_counter_charge(&mem->memsw, csize, &fail_res);
+ if (likely(!ret))
+ return CHARGE_OK;
+
+ mem_over_limit = mem_cgroup_from_res_counter(fail_res, memsw);
+ flags |= MEM_CGROUP_RECLAIM_NOSWAP;
+ } else
+ mem_over_limit = mem_cgroup_from_res_counter(fail_res, res);
+
+ if (csize > PAGE_SIZE) /* change csize and retry */
+ return CHARGE_RETRY;
+
+ if (!(gfp_mask & __GFP_WAIT))
+ return CHARGE_WOULDBLOCK;
+
+ ret = mem_cgroup_hierarchical_reclaim(mem_over_limit, NULL,
+ gfp_mask, flags);
+ /*
+ * try_to_free_mem_cgroup_pages() might not give us a full
+ * picture of reclaim. Some pages are reclaimed and might be
+ * moved to swap cache or just unmapped from the cgroup.
+ * Check the limit again to see if the reclaim reduced the
+ * current usage of the cgroup before giving up
+ */
+ if (ret || mem_cgroup_check_under_limit(mem_over_limit))
+ return CHARGE_RETRY;
+
+ /*
+ * At task move, charge accounts can be doubly counted. So, it's
+ * better to wait until the end of task_move if something is going on.
+ */
+ if (mem_cgroup_wait_acct_move(mem_over_limit))
+ return CHARGE_RETRY;
+
+ /* If we don't need to call oom-killer at el, return immediately */
+ if (!oom_check)
+ return CHARGE_NOMEM;
+ /* check OOM */
+ if (!mem_cgroup_handle_oom(mem_over_limit, gfp_mask))
+ return CHARGE_OOM_DIE;
+
+ return CHARGE_RETRY;
+}
+
/*
* Unlike exported interface, "oom" parameter is added. if oom==true,
* oom-killer can be invoked.
*/
static int __mem_cgroup_try_charge(struct mm_struct *mm,
- gfp_t gfp_mask, struct mem_cgroup **memcg, bool oom)
+ gfp_t gfp_mask, struct mem_cgroup **memcg, bool oom)
{
- struct mem_cgroup *mem, *mem_over_limit;
- int nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
- struct res_counter *fail_res;
+ int nr_oom_retries = MEM_CGROUP_RECLAIM_RETRIES;
+ struct mem_cgroup *mem = NULL;
+ int ret;
int csize = CHARGE_SIZE;
/*
* thread group leader migrates. It's possible that mm is not
* set, if so charge the init_mm (happens for pagecache usage).
*/
- mem = *memcg;
- if (likely(!mem)) {
- mem = try_get_mem_cgroup_from_mm(mm);
- *memcg = mem;
- } else {
- css_get(&mem->css);
- }
- if (unlikely(!mem))
- return 0;
-
- VM_BUG_ON(css_is_removed(&mem->css));
- if (mem_cgroup_is_root(mem))
- goto done;
-
- while (1) {
- int ret = 0;
- unsigned long flags = 0;
-
+ if (!*memcg && !mm)
+ goto bypass;
+again:
+ if (*memcg) { /* css should be a valid one */
+ mem = *memcg;
+ VM_BUG_ON(css_is_removed(&mem->css));
+ if (mem_cgroup_is_root(mem))
+ goto done;
if (consume_stock(mem))
goto done;
+ css_get(&mem->css);
+ } else {
+ struct task_struct *p;
- ret = res_counter_charge(&mem->res, csize, &fail_res);
- if (likely(!ret)) {
- if (!do_swap_account)
- break;
- ret = res_counter_charge(&mem->memsw, csize, &fail_res);
- if (likely(!ret))
- break;
- /* mem+swap counter fails */
- res_counter_uncharge(&mem->res, csize);
- flags |= MEM_CGROUP_RECLAIM_NOSWAP;
- mem_over_limit = mem_cgroup_from_res_counter(fail_res,
- memsw);
- } else
- /* mem counter fails */
- mem_over_limit = mem_cgroup_from_res_counter(fail_res,
- res);
-
- /* reduce request size and retry */
- if (csize > PAGE_SIZE) {
- csize = PAGE_SIZE;
- continue;
- }
- if (!(gfp_mask & __GFP_WAIT))
- goto nomem;
-
- ret = mem_cgroup_hierarchical_reclaim(mem_over_limit, NULL,
- gfp_mask, flags);
- if (ret)
- continue;
-
+ rcu_read_lock();
+ p = rcu_dereference(mm->owner);
+ VM_BUG_ON(!p);
/*
- * try_to_free_mem_cgroup_pages() might not give us a full
- * picture of reclaim. Some pages are reclaimed and might be
- * moved to swap cache or just unmapped from the cgroup.
- * Check the limit again to see if the reclaim reduced the
- * current usage of the cgroup before giving up
- *
+ * because we don't have task_lock(), "p" can exit while
+ * we're here. In that case, "mem" can point to root
+ * cgroup but never be NULL. (and task_struct itself is freed
+ * by RCU, cgroup itself is RCU safe.) Then, we have small
+ * risk here to get wrong cgroup. But such kind of mis-account
+ * by race always happens because we don't have cgroup_mutex().
+ * It's overkill and we allow that small race, here.
*/
- if (mem_cgroup_check_under_limit(mem_over_limit))
- continue;
-
- /* try to avoid oom while someone is moving charge */
- if (mc.moving_task && current != mc.moving_task) {
- struct mem_cgroup *from, *to;
- bool do_continue = false;
+ mem = mem_cgroup_from_task(p);
+ VM_BUG_ON(!mem);
+ if (mem_cgroup_is_root(mem)) {
+ rcu_read_unlock();
+ goto done;
+ }
+ if (consume_stock(mem)) {
/*
- * There is a small race that "from" or "to" can be
- * freed by rmdir, so we use css_tryget().
+ * It seems dagerous to access memcg without css_get().
+ * But considering how consume_stok works, it's not
+ * necessary. If consume_stock success, some charges
+ * from this memcg are cached on this cpu. So, we
+ * don't need to call css_get()/css_tryget() before
+ * calling consume_stock().
*/
- from = mc.from;
- to = mc.to;
- if (from && css_tryget(&from->css)) {
- if (mem_over_limit->use_hierarchy)
- do_continue = css_is_ancestor(
- &from->css,
- &mem_over_limit->css);
- else
- do_continue = (from == mem_over_limit);
- css_put(&from->css);
- }
- if (!do_continue && to && css_tryget(&to->css)) {
- if (mem_over_limit->use_hierarchy)
- do_continue = css_is_ancestor(
- &to->css,
- &mem_over_limit->css);
- else
- do_continue = (to == mem_over_limit);
- css_put(&to->css);
- }
- if (do_continue) {
- DEFINE_WAIT(wait);
- prepare_to_wait(&mc.waitq, &wait,
- TASK_INTERRUPTIBLE);
- /* moving charge context might have finished. */
- if (mc.moving_task)
- schedule();
- finish_wait(&mc.waitq, &wait);
- continue;
- }
+ rcu_read_unlock();
+ goto done;
+ }
+ /* after here, we may be blocked. we need to get refcnt */
+ if (!css_tryget(&mem->css)) {
+ rcu_read_unlock();
+ goto again;
+ }
+ rcu_read_unlock();
+ }
+
+ do {
+ bool oom_check;
+
+ /* If killed, bypass charge */
+ if (fatal_signal_pending(current)) {
+ css_put(&mem->css);
+ goto bypass;
}
- if (!nr_retries--) {
- if (!oom)
+ oom_check = false;
+ if (oom && !nr_oom_retries) {
+ oom_check = true;
+ nr_oom_retries = MEM_CGROUP_RECLAIM_RETRIES;
+ }
+
+ ret = __mem_cgroup_do_charge(mem, gfp_mask, csize, oom_check);
+
+ switch (ret) {
+ case CHARGE_OK:
+ break;
+ case CHARGE_RETRY: /* not in OOM situation but retry */
+ csize = PAGE_SIZE;
+ css_put(&mem->css);
+ mem = NULL;
+ goto again;
+ case CHARGE_WOULDBLOCK: /* !__GFP_WAIT */
+ css_put(&mem->css);
+ goto nomem;
+ case CHARGE_NOMEM: /* OOM routine works */
+ if (!oom) {
+ css_put(&mem->css);
goto nomem;
- if (mem_cgroup_handle_oom(mem_over_limit, gfp_mask)) {
- nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
- continue;
}
- /* When we reach here, current task is dying .*/
+ /* If oom, we never return -ENOMEM */
+ nr_oom_retries--;
+ break;
+ case CHARGE_OOM_DIE: /* Killed by OOM Killer */
css_put(&mem->css);
goto bypass;
}
- }
+ } while (ret != CHARGE_OK);
+
if (csize > PAGE_SIZE)
refill_stock(mem, csize - PAGE_SIZE);
+ css_put(&mem->css);
done:
+ *memcg = mem;
return 0;
nomem:
- css_put(&mem->css);
+ *memcg = NULL;
return -ENOMEM;
bypass:
*memcg = NULL;
res_counter_uncharge(&mem->res, PAGE_SIZE * count);
if (do_swap_account)
res_counter_uncharge(&mem->memsw, PAGE_SIZE * count);
- VM_BUG_ON(test_bit(CSS_ROOT, &mem->css.flags));
- WARN_ON_ONCE(count > INT_MAX);
- __css_put(&mem->css, (int)count);
}
- /* we don't need css_put for root */
}
static void mem_cgroup_cancel_charge(struct mem_cgroup *mem)
* < 0 if the cgroup is over its limit
*/
static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm,
- gfp_t gfp_mask, enum charge_type ctype,
- struct mem_cgroup *memcg)
+ gfp_t gfp_mask, enum charge_type ctype)
{
- struct mem_cgroup *mem;
+ struct mem_cgroup *mem = NULL;
struct page_cgroup *pc;
int ret;
return 0;
prefetchw(pc);
- mem = memcg;
ret = __mem_cgroup_try_charge(mm, gfp_mask, &mem, true);
if (ret || !mem)
return ret;
if (unlikely(!mm))
mm = &init_mm;
return mem_cgroup_charge_common(page, mm, gfp_mask,
- MEM_CGROUP_CHARGE_TYPE_MAPPED, NULL);
+ MEM_CGROUP_CHARGE_TYPE_MAPPED);
}
static void
int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask)
{
- struct mem_cgroup *mem = NULL;
int ret;
if (mem_cgroup_disabled())
if (!(gfp_mask & __GFP_WAIT)) {
struct page_cgroup *pc;
-
pc = lookup_page_cgroup(page);
if (!pc)
return 0;
unlock_page_cgroup(pc);
}
- if (unlikely(!mm && !mem))
+ if (unlikely(!mm))
mm = &init_mm;
if (page_is_file_cache(page))
return mem_cgroup_charge_common(page, mm, gfp_mask,
- MEM_CGROUP_CHARGE_TYPE_CACHE, NULL);
+ MEM_CGROUP_CHARGE_TYPE_CACHE);
/* shmem */
if (PageSwapCache(page)) {
+ struct mem_cgroup *mem = NULL;
+
ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &mem);
if (!ret)
__mem_cgroup_commit_charge_swapin(page, mem,
MEM_CGROUP_CHARGE_TYPE_SHMEM);
} else
ret = mem_cgroup_charge_common(page, mm, gfp_mask,
- MEM_CGROUP_CHARGE_TYPE_SHMEM, mem);
+ MEM_CGROUP_CHARGE_TYPE_SHMEM);
return ret;
}
goto charge_cur_mm;
*ptr = mem;
ret = __mem_cgroup_try_charge(NULL, mask, ptr, true);
- /* drop extra refcnt from tryget */
css_put(&mem->css);
return ret;
charge_cur_mm:
{
struct page_cgroup *pc;
struct mem_cgroup *mem = NULL;
- struct mem_cgroup_per_zone *mz;
if (mem_cgroup_disabled())
return NULL;
break;
}
- if (!mem_cgroup_is_root(mem))
- __do_uncharge(mem, ctype);
- if (ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
- mem_cgroup_swap_statistics(mem, true);
mem_cgroup_charge_statistics(mem, pc, false);
ClearPageCgroupUsed(pc);
* special functions.
*/
- mz = page_cgroup_zoneinfo(pc);
unlock_page_cgroup(pc);
-
+ /*
+ * even after unlock, we have mem->res.usage here and this memcg
+ * will never be freed.
+ */
memcg_check_events(mem, page);
- /* at swapout, this memcg will be accessed to record to swap */
- if (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
- css_put(&mem->css);
+ if (do_swap_account && ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT) {
+ mem_cgroup_swap_statistics(mem, true);
+ mem_cgroup_get(mem);
+ }
+ if (!mem_cgroup_is_root(mem))
+ __do_uncharge(mem, ctype);
return mem;
memcg = __mem_cgroup_uncharge_common(page, ctype);
- /* record memcg information */
- if (do_swap_account && swapout && memcg) {
+ /*
+ * record memcg information, if swapout && memcg != NULL,
+ * mem_cgroup_get() was called in uncharge().
+ */
+ if (do_swap_account && swapout && memcg)
swap_cgroup_record(ent, css_id(&memcg->css));
- mem_cgroup_get(memcg);
- }
- if (swapout && memcg)
- css_put(&memcg->css);
}
#endif
*/
if (!mem_cgroup_is_root(to))
res_counter_uncharge(&to->res, PAGE_SIZE);
- css_put(&to->css);
}
return 0;
}
ClearPageCgroupMigration(pc);
unlock_page_cgroup(pc);
- if (unused != oldpage)
- pc = lookup_page_cgroup(unused);
__mem_cgroup_uncharge_common(unused, MEM_CGROUP_CHARGE_TYPE_FORCE);
- pc = lookup_page_cgroup(used);
/*
* If a page is a file cache, radix-tree replacement is very atomic
* and we can skip this check. When it was an Anon page, its mapcount
}
unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
- gfp_t gfp_mask, int nid,
- int zid)
+ gfp_t gfp_mask)
{
unsigned long nr_reclaimed = 0;
struct mem_cgroup_per_zone *mz, *next_mz = NULL;
if (order > 0)
return 0;
- mctz = soft_limit_tree_node_zone(nid, zid);
+ mctz = soft_limit_tree_node_zone(zone_to_nid(zone), zone_idx(zone));
/*
* This loop can run a while, specially if mem_cgroup's continuously
* keep exceeding their soft limit and putting the system under
return 0;
}
-/*
- */
static int mem_cgroup_oom_control_write(struct cgroup *cgrp,
struct cftype *cft, u64 val)
{
goto one_by_one;
}
mc.precharge += count;
- VM_BUG_ON(test_bit(CSS_ROOT, &mem->css.flags));
- WARN_ON_ONCE(count > INT_MAX);
- __css_get(&mem->css, (int)count);
return ret;
}
one_by_one:
static void mem_cgroup_clear_mc(void)
{
+ struct mem_cgroup *from = mc.from;
+ struct mem_cgroup *to = mc.to;
+
/* we must uncharge all the leftover precharges from mc.to */
if (mc.precharge) {
__mem_cgroup_cancel_charge(mc.to, mc.precharge);
mc.precharge = 0;
- memcg_oom_recover(mc.to);
}
/*
* we didn't uncharge from mc.from at mem_cgroup_move_account(), so
if (mc.moved_charge) {
__mem_cgroup_cancel_charge(mc.from, mc.moved_charge);
mc.moved_charge = 0;
- memcg_oom_recover(mc.from);
}
/* we must fixup refcnts and charges */
if (mc.moved_swap) {
- WARN_ON_ONCE(mc.moved_swap > INT_MAX);
/* uncharge swap account from the old cgroup */
if (!mem_cgroup_is_root(mc.from))
res_counter_uncharge(&mc.from->memsw,
*/
res_counter_uncharge(&mc.to->res,
PAGE_SIZE * mc.moved_swap);
- VM_BUG_ON(test_bit(CSS_ROOT, &mc.to->css.flags));
- __css_put(&mc.to->css, mc.moved_swap);
}
/* we've already done mem_cgroup_get(mc.to) */
mc.moved_swap = 0;
}
+ spin_lock(&mc.lock);
mc.from = NULL;
mc.to = NULL;
mc.moving_task = NULL;
+ spin_unlock(&mc.lock);
+ memcg_oom_recover(from);
+ memcg_oom_recover(to);
wake_up_all(&mc.waitq);
}
VM_BUG_ON(mc.moved_charge);
VM_BUG_ON(mc.moved_swap);
VM_BUG_ON(mc.moving_task);
+ spin_lock(&mc.lock);
mc.from = from;
mc.to = mem;
mc.precharge = 0;
mc.moved_charge = 0;
mc.moved_swap = 0;
mc.moving_task = current;
+ spin_unlock(&mc.lock);
ret = mem_cgroup_precharge_mc(mm);
if (ret)
#include <linux/suspend.h>
#include <linux/slab.h>
#include <linux/swapops.h>
+#include <linux/hugetlb.h>
#include "internal.h"
int sysctl_memory_failure_early_kill __read_mostly = 0;
/*
* Huge pages. Needs work.
* Issues:
- * No rmap support so we cannot find the original mapper. In theory could walk
- * all MMs and look for the mappings, but that would be non atomic and racy.
- * Need rmap for hugepages for this. Alternatively we could employ a heuristic,
- * like just walking the current process and hoping it has it mapped (that
- * should be usually true for the common "shared database cache" case)
- * Should handle free huge pages and dequeue them too, but this needs to
- * handle huge page accounting correctly.
+ * - Error on hugepage is contained in hugepage unit (not in raw page unit.)
+ * To narrow down kill region to one page, we need to break up pmd.
+ * - To support soft-offlining for hugepage, we need to support hugepage
+ * migration.
*/
static int me_huge_page(struct page *p, unsigned long pfn)
{
- return FAILED;
+ struct page *hpage = compound_head(p);
+ /*
+ * We can safely recover from error on free or reserved (i.e.
+ * not in-use) hugepage by dequeuing it from freelist.
+ * To check whether a hugepage is in-use or not, we can't use
+ * page->lru because it can be used in other hugepage operations,
+ * such as __unmap_hugepage_range() and gather_surplus_pages().
+ * So instead we use page_mapping() and PageAnon().
+ * We assume that this function is called with page lock held,
+ * so there is no race between isolation and mapping/unmapping.
+ */
+ if (!(page_mapping(hpage) || PageAnon(hpage))) {
+ __isolate_hwpoisoned_huge_page(hpage);
+ return RECOVERED;
+ }
+ return DELAYED;
}
/*
int ret;
int i;
int kill = 1;
+ struct page *hpage = compound_head(p);
if (PageReserved(p) || PageSlab(p))
return SWAP_SUCCESS;
* This check implies we don't kill processes if their pages
* are in the swap cache early. Those are always late kills.
*/
- if (!page_mapped(p))
+ if (!page_mapped(hpage))
return SWAP_SUCCESS;
- if (PageCompound(p) || PageKsm(p))
+ if (PageKsm(p))
return SWAP_FAIL;
if (PageSwapCache(p)) {
* XXX: the dirty test could be racy: set_page_dirty() may not always
* be called inside page lock (it's recommended but not enforced).
*/
- mapping = page_mapping(p);
- if (!PageDirty(p) && mapping && mapping_cap_writeback_dirty(mapping)) {
- if (page_mkclean(p)) {
- SetPageDirty(p);
+ mapping = page_mapping(hpage);
+ if (!PageDirty(hpage) && mapping &&
+ mapping_cap_writeback_dirty(mapping)) {
+ if (page_mkclean(hpage)) {
+ SetPageDirty(hpage);
} else {
kill = 0;
ttu |= TTU_IGNORE_HWPOISON;
* there's nothing that can be done.
*/
if (kill)
- collect_procs(p, &tokill);
+ collect_procs(hpage, &tokill);
/*
* try_to_unmap can fail temporarily due to races.
* Try a few times (RED-PEN better strategy?)
*/
for (i = 0; i < N_UNMAP_TRIES; i++) {
- ret = try_to_unmap(p, ttu);
+ ret = try_to_unmap(hpage, ttu);
if (ret == SWAP_SUCCESS)
break;
pr_debug("MCE %#lx: try_to_unmap retry needed %d\n", pfn, ret);
if (ret != SWAP_SUCCESS)
printk(KERN_ERR "MCE %#lx: failed to unmap page (mapcount=%d)\n",
- pfn, page_mapcount(p));
+ pfn, page_mapcount(hpage));
/*
* Now that the dirty bit has been propagated to the
* use a more force-full uncatchable kill to prevent
* any accesses to the poisoned memory.
*/
- kill_procs_ao(&tokill, !!PageDirty(p), trapno,
+ kill_procs_ao(&tokill, !!PageDirty(hpage), trapno,
ret != SWAP_SUCCESS, pfn);
return ret;
}
+static void set_page_hwpoison_huge_page(struct page *hpage)
+{
+ int i;
+ int nr_pages = 1 << compound_order(hpage);
+ for (i = 0; i < nr_pages; i++)
+ SetPageHWPoison(hpage + i);
+}
+
+static void clear_page_hwpoison_huge_page(struct page *hpage)
+{
+ int i;
+ int nr_pages = 1 << compound_order(hpage);
+ for (i = 0; i < nr_pages; i++)
+ ClearPageHWPoison(hpage + i);
+}
+
int __memory_failure(unsigned long pfn, int trapno, int flags)
{
struct page_state *ps;
struct page *p;
+ struct page *hpage;
int res;
+ unsigned int nr_pages;
if (!sysctl_memory_failure_recovery)
panic("Memory failure from trap %d on page %lx", trapno, pfn);
}
p = pfn_to_page(pfn);
+ hpage = compound_head(p);
if (TestSetPageHWPoison(p)) {
printk(KERN_ERR "MCE %#lx: already hardware poisoned\n", pfn);
return 0;
}
- atomic_long_add(1, &mce_bad_pages);
+ nr_pages = 1 << compound_order(hpage);
+ atomic_long_add(nr_pages, &mce_bad_pages);
/*
* We need/can do nothing about count=0 pages.
* that may make page_freeze_refs()/page_unfreeze_refs() mismatch.
*/
if (!(flags & MF_COUNT_INCREASED) &&
- !get_page_unless_zero(compound_head(p))) {
+ !get_page_unless_zero(hpage)) {
if (is_free_buddy_page(p)) {
action_result(pfn, "free buddy", DELAYED);
return 0;
* The check (unnecessarily) ignores LRU pages being isolated and
* walked by the page reclaim code, however that's not a big loss.
*/
- if (!PageLRU(p))
+ if (!PageLRU(p) && !PageHuge(p))
shake_page(p, 0);
- if (!PageLRU(p)) {
+ if (!PageLRU(p) && !PageHuge(p)) {
/*
* shake_page could have turned it free.
*/
* It's very difficult to mess with pages currently under IO
* and in many cases impossible, so we just avoid it here.
*/
- lock_page_nosync(p);
+ lock_page_nosync(hpage);
/*
* unpoison always clear PG_hwpoison inside page lock
}
if (hwpoison_filter(p)) {
if (TestClearPageHWPoison(p))
- atomic_long_dec(&mce_bad_pages);
- unlock_page(p);
- put_page(p);
+ atomic_long_sub(nr_pages, &mce_bad_pages);
+ unlock_page(hpage);
+ put_page(hpage);
+ return 0;
+ }
+
+ /*
+ * For error on the tail page, we should set PG_hwpoison
+ * on the head page to show that the hugepage is hwpoisoned
+ */
+ if (PageTail(p) && TestSetPageHWPoison(hpage)) {
+ action_result(pfn, "hugepage already hardware poisoned",
+ IGNORED);
+ unlock_page(hpage);
+ put_page(hpage);
return 0;
}
+ /*
+ * Set PG_hwpoison on all pages in an error hugepage,
+ * because containment is done in hugepage unit for now.
+ * Since we have done TestSetPageHWPoison() for the head page with
+ * page lock held, we can safely set PG_hwpoison bits on tail pages.
+ */
+ if (PageHuge(p))
+ set_page_hwpoison_huge_page(hpage);
wait_on_page_writeback(p);
}
}
out:
- unlock_page(p);
+ unlock_page(hpage);
return res;
}
EXPORT_SYMBOL_GPL(__memory_failure);
struct page *page;
struct page *p;
int freeit = 0;
+ unsigned int nr_pages;
if (!pfn_valid(pfn))
return -ENXIO;
return 0;
}
+ nr_pages = 1 << compound_order(page);
+
if (!get_page_unless_zero(page)) {
if (TestClearPageHWPoison(p))
- atomic_long_dec(&mce_bad_pages);
+ atomic_long_sub(nr_pages, &mce_bad_pages);
pr_debug("MCE: Software-unpoisoned free page %#lx\n", pfn);
return 0;
}
* the PG_hwpoison page will be caught and isolated on the entrance to
* the free buddy page pool.
*/
- if (TestClearPageHWPoison(p)) {
+ if (TestClearPageHWPoison(page)) {
pr_debug("MCE: Software-unpoisoned page %#lx\n", pfn);
- atomic_long_dec(&mce_bad_pages);
+ atomic_long_sub(nr_pages, &mce_bad_pages);
freeit = 1;
}
+ if (PageHuge(p))
+ clear_page_hwpoison_huge_page(page);
unlock_page(page);
put_page(page);
return ret;
}
+/*
+ * This is like a special single-page "expand_downwards()",
+ * except we must first make sure that 'address-PAGE_SIZE'
+ * doesn't hit another vma.
+ *
+ * The "find_vma()" will do the right thing even if we wrap
+ */
+static inline int check_stack_guard_page(struct vm_area_struct *vma, unsigned long address)
+{
+ address &= PAGE_MASK;
+ if ((vma->vm_flags & VM_GROWSDOWN) && address == vma->vm_start) {
+ address -= PAGE_SIZE;
+ if (find_vma(vma->vm_mm, address) != vma)
+ return -ENOMEM;
+
+ expand_stack(vma, address);
+ }
+ return 0;
+}
+
/*
* We enter with non-exclusive mmap_sem (to exclude vma changes,
* but allow concurrent faults), and pte mapped but not yet locked.
spinlock_t *ptl;
pte_t entry;
+ pte_unmap(page_table);
+
+ /* Check if we need to add a guard page to the stack */
+ if (check_stack_guard_page(vma, address) < 0)
+ return VM_FAULT_SIGBUS;
+
+ /* Use the zero-page for reads */
if (!(flags & FAULT_FLAG_WRITE)) {
entry = pte_mkspecial(pfn_pte(my_zero_pfn(address),
vma->vm_page_prot));
- ptl = pte_lockptr(mm, pmd);
- spin_lock(ptl);
+ page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
if (!pte_none(*page_table))
goto unlock;
goto setpte;
}
/* Allocate our own private page. */
- pte_unmap(page_table);
-
if (unlikely(anon_vma_prepare(vma)))
goto oom;
page = alloc_zeroed_user_highpage_movable(vma, address);
if (vma->vm_flags & VM_WRITE)
gup_flags |= FOLL_WRITE;
+ /* We don't try to access the guard page of a stack vma */
+ if (vma->vm_flags & VM_GROWSDOWN) {
+ if (start == vma->vm_start) {
+ start += PAGE_SIZE;
+ nr_pages--;
+ }
+ }
+
while (nr_pages > 0) {
int i;
#include <asm/mmu_context.h>
#include "internal.h"
-static inline __attribute__((format(printf, 1, 2)))
-void no_printk(const char *fmt, ...)
-{
-}
-
#if 0
#define kenter(FMT, ...) \
printk(KERN_DEBUG "==> %s("FMT")\n", __func__, ##__VA_ARGS__)
* pointer. Return p, or any of its subthreads with a valid ->mm, with
* task_lock() held.
*/
-static struct task_struct *find_lock_task_mm(struct task_struct *p)
+struct task_struct *find_lock_task_mm(struct task_struct *p)
{
struct task_struct *t = p;
#include <linux/syscalls.h>
#include <linux/buffer_head.h>
#include <linux/pagevec.h>
+#include <trace/events/writeback.h>
/*
* After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
}
}
-/*
- * Clip the earned share of dirty pages to that which is actually available.
- * This avoids exceeding the total dirty_limit when the floating averages
- * fluctuate too quickly.
- */
-static void clip_bdi_dirty_limit(struct backing_dev_info *bdi,
- unsigned long dirty, unsigned long *pbdi_dirty)
-{
- unsigned long avail_dirty;
-
- avail_dirty = global_page_state(NR_FILE_DIRTY) +
- global_page_state(NR_WRITEBACK) +
- global_page_state(NR_UNSTABLE_NFS) +
- global_page_state(NR_WRITEBACK_TEMP);
-
- if (avail_dirty < dirty)
- avail_dirty = dirty - avail_dirty;
- else
- avail_dirty = 0;
-
- avail_dirty += bdi_stat(bdi, BDI_RECLAIMABLE) +
- bdi_stat(bdi, BDI_WRITEBACK);
-
- *pbdi_dirty = min(*pbdi_dirty, avail_dirty);
-}
-
static inline void task_dirties_fraction(struct task_struct *tsk,
long *numerator, long *denominator)
{
}
/*
- * scale the dirty limit
+ * task_dirty_limit - scale down dirty throttling threshold for one task
*
* task specific dirty limit:
*
* dirty -= (dirty/8) * p_{t}
+ *
+ * To protect light/slow dirtying tasks from heavier/fast ones, we start
+ * throttling individual tasks before reaching the bdi dirty limit.
+ * Relatively low thresholds will be allocated to heavy dirtiers. So when
+ * dirty pages grow large, heavy dirtiers will be throttled first, which will
+ * effectively curb the growth of dirty pages. Light dirtiers with high enough
+ * dirty threshold may never get throttled.
*/
-static void task_dirty_limit(struct task_struct *tsk, unsigned long *pdirty)
+static unsigned long task_dirty_limit(struct task_struct *tsk,
+ unsigned long bdi_dirty)
{
long numerator, denominator;
- unsigned long dirty = *pdirty;
+ unsigned long dirty = bdi_dirty;
u64 inv = dirty >> 3;
task_dirties_fraction(tsk, &numerator, &denominator);
do_div(inv, denominator);
dirty -= inv;
- if (dirty < *pdirty/2)
- dirty = *pdirty/2;
- *pdirty = dirty;
+ return max(dirty, bdi_dirty/2);
}
/*
return x + 1; /* Ensure that we never return 0 */
}
-void
-get_dirty_limits(unsigned long *pbackground, unsigned long *pdirty,
- unsigned long *pbdi_dirty, struct backing_dev_info *bdi)
+/*
+ * global_dirty_limits - background-writeback and dirty-throttling thresholds
+ *
+ * Calculate the dirty thresholds based on sysctl parameters
+ * - vm.dirty_background_ratio or vm.dirty_background_bytes
+ * - vm.dirty_ratio or vm.dirty_bytes
+ * The dirty limits will be lifted by 1/4 for PF_LESS_THROTTLE (ie. nfsd) and
+ * runtime tasks.
+ */
+void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty)
{
unsigned long background;
unsigned long dirty;
}
*pbackground = background;
*pdirty = dirty;
+}
+
+/*
+ * bdi_dirty_limit - @bdi's share of dirty throttling threshold
+ *
+ * Allocate high/low dirty limits to fast/slow devices, in order to prevent
+ * - starving fast devices
+ * - piling up dirty pages (that will take long time to sync) on slow devices
+ *
+ * The bdi's share of dirty limit will be adapting to its throughput and
+ * bounded by the bdi->min_ratio and/or bdi->max_ratio parameters, if set.
+ */
+unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty)
+{
+ u64 bdi_dirty;
+ long numerator, denominator;
- if (bdi) {
- u64 bdi_dirty;
- long numerator, denominator;
+ /*
+ * Calculate this BDI's share of the dirty ratio.
+ */
+ bdi_writeout_fraction(bdi, &numerator, &denominator);
- /*
- * Calculate this BDI's share of the dirty ratio.
- */
- bdi_writeout_fraction(bdi, &numerator, &denominator);
-
- bdi_dirty = (dirty * (100 - bdi_min_ratio)) / 100;
- bdi_dirty *= numerator;
- do_div(bdi_dirty, denominator);
- bdi_dirty += (dirty * bdi->min_ratio) / 100;
- if (bdi_dirty > (dirty * bdi->max_ratio) / 100)
- bdi_dirty = dirty * bdi->max_ratio / 100;
-
- *pbdi_dirty = bdi_dirty;
- clip_bdi_dirty_limit(bdi, dirty, pbdi_dirty);
- task_dirty_limit(current, pbdi_dirty);
- }
+ bdi_dirty = (dirty * (100 - bdi_min_ratio)) / 100;
+ bdi_dirty *= numerator;
+ do_div(bdi_dirty, denominator);
+
+ bdi_dirty += (dirty * bdi->min_ratio) / 100;
+ if (bdi_dirty > (dirty * bdi->max_ratio) / 100)
+ bdi_dirty = dirty * bdi->max_ratio / 100;
+
+ return bdi_dirty;
}
/*
unsigned long bdi_thresh;
unsigned long pages_written = 0;
unsigned long pause = 1;
-
+ bool dirty_exceeded = false;
struct backing_dev_info *bdi = mapping->backing_dev_info;
for (;;) {
.range_cyclic = 1,
};
- get_dirty_limits(&background_thresh, &dirty_thresh,
- &bdi_thresh, bdi);
-
nr_reclaimable = global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_UNSTABLE_NFS);
nr_writeback = global_page_state(NR_WRITEBACK);
- bdi_nr_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
- bdi_nr_writeback = bdi_stat(bdi, BDI_WRITEBACK);
-
- if (bdi_nr_reclaimable + bdi_nr_writeback <= bdi_thresh)
- break;
+ global_dirty_limits(&background_thresh, &dirty_thresh);
/*
* Throttle it only when the background writeback cannot
(background_thresh + dirty_thresh) / 2)
break;
- if (!bdi->dirty_exceeded)
- bdi->dirty_exceeded = 1;
-
- /* Note: nr_reclaimable denotes nr_dirty + nr_unstable.
- * Unstable writes are a feature of certain networked
- * filesystems (i.e. NFS) in which data may have been
- * written to the server's write cache, but has not yet
- * been flushed to permanent storage.
- * Only move pages to writeback if this bdi is over its
- * threshold otherwise wait until the disk writes catch
- * up.
- */
- if (bdi_nr_reclaimable > bdi_thresh) {
- writeback_inodes_wb(&bdi->wb, &wbc);
- pages_written += write_chunk - wbc.nr_to_write;
- get_dirty_limits(&background_thresh, &dirty_thresh,
- &bdi_thresh, bdi);
- }
+ bdi_thresh = bdi_dirty_limit(bdi, dirty_thresh);
+ bdi_thresh = task_dirty_limit(current, bdi_thresh);
/*
* In order to avoid the stacked BDI deadlock we need
if (bdi_thresh < 2*bdi_stat_error(bdi)) {
bdi_nr_reclaimable = bdi_stat_sum(bdi, BDI_RECLAIMABLE);
bdi_nr_writeback = bdi_stat_sum(bdi, BDI_WRITEBACK);
- } else if (bdi_nr_reclaimable) {
+ } else {
bdi_nr_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
bdi_nr_writeback = bdi_stat(bdi, BDI_WRITEBACK);
}
- if (bdi_nr_reclaimable + bdi_nr_writeback <= bdi_thresh)
+ /*
+ * The bdi thresh is somehow "soft" limit derived from the
+ * global "hard" limit. The former helps to prevent heavy IO
+ * bdi or process from holding back light ones; The latter is
+ * the last resort safeguard.
+ */
+ dirty_exceeded =
+ (bdi_nr_reclaimable + bdi_nr_writeback >= bdi_thresh)
+ || (nr_reclaimable + nr_writeback >= dirty_thresh);
+
+ if (!dirty_exceeded)
break;
- if (pages_written >= write_chunk)
- break; /* We've done our duty */
+ if (!bdi->dirty_exceeded)
+ bdi->dirty_exceeded = 1;
+
+ /* Note: nr_reclaimable denotes nr_dirty + nr_unstable.
+ * Unstable writes are a feature of certain networked
+ * filesystems (i.e. NFS) in which data may have been
+ * written to the server's write cache, but has not yet
+ * been flushed to permanent storage.
+ * Only move pages to writeback if this bdi is over its
+ * threshold otherwise wait until the disk writes catch
+ * up.
+ */
+ trace_wbc_balance_dirty_start(&wbc, bdi);
+ if (bdi_nr_reclaimable > bdi_thresh) {
+ writeback_inodes_wb(&bdi->wb, &wbc);
+ pages_written += write_chunk - wbc.nr_to_write;
+ trace_wbc_balance_dirty_written(&wbc, bdi);
+ if (pages_written >= write_chunk)
+ break; /* We've done our duty */
+ }
+ trace_wbc_balance_dirty_wait(&wbc, bdi);
__set_current_state(TASK_INTERRUPTIBLE);
io_schedule_timeout(pause);
pause = HZ / 10;
}
- if (bdi_nr_reclaimable + bdi_nr_writeback < bdi_thresh &&
- bdi->dirty_exceeded)
+ if (!dirty_exceeded && bdi->dirty_exceeded)
bdi->dirty_exceeded = 0;
if (writeback_in_progress(bdi))
* background_thresh, to keep the amount of dirty memory low.
*/
if ((laptop_mode && pages_written) ||
- (!laptop_mode && ((global_page_state(NR_FILE_DIRTY)
- + global_page_state(NR_UNSTABLE_NFS))
- > background_thresh)))
+ (!laptop_mode && (nr_reclaimable > background_thresh)))
bdi_start_background_writeback(bdi);
}
unsigned long dirty_thresh;
for ( ; ; ) {
- get_dirty_limits(&background_thresh, &dirty_thresh, NULL, NULL);
+ global_dirty_limits(&background_thresh, &dirty_thresh);
/*
* Boost the allowable dirty threshold a bit for page
/*
* We tag pages in batches of WRITEBACK_TAG_BATCH to reduce tree_lock latency.
*/
-#define WRITEBACK_TAG_BATCH 4096
void tag_pages_for_writeback(struct address_space *mapping,
pgoff_t start, pgoff_t end)
{
+#define WRITEBACK_TAG_BATCH 4096
unsigned long tagged;
do {
if (!clear_page_dirty_for_io(page))
goto continue_unlock;
+ trace_wbc_writepage(wbc, mapping->backing_dev_info);
ret = (*writepage)(page, wbc, data);
if (unlikely(ret)) {
if (ret == AOP_WRITEPAGE_ACTIVATE) {
goto out;
}
if (wbc->sync_mode == WB_SYNC_ALL)
- rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
+ rw |= REQ_SYNC | REQ_UNPLUG;
count_vm_event(PSWPOUT);
set_page_writeback(page);
unlock_page(page);
#include <linux/memcontrol.h>
#include <linux/mmu_notifier.h>
#include <linux/migrate.h>
+#include <linux/hugetlb.h>
#include <asm/tlbflush.h>
pgoff_t pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
unsigned long address;
+ if (unlikely(is_vm_hugetlb_page(vma)))
+ pgoff = page->index << huge_page_order(page_hstate(page));
address = vma->vm_start + ((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
if (unlikely(address < vma->vm_start || address >= vma->vm_end)) {
/* page should be within @vma mapping range */
pte_t *pte;
spinlock_t *ptl;
+ if (unlikely(PageHuge(page))) {
+ pte = huge_pte_offset(mm, address);
+ ptl = &mm->page_table_lock;
+ goto check;
+ }
+
pgd = pgd_offset(mm, address);
if (!pgd_present(*pgd))
return NULL;
}
ptl = pte_lockptr(mm, pmd);
+check:
spin_lock(ptl);
if (pte_present(*pte) && page_to_pfn(page) == pte_pfn(*pte)) {
*ptlp = ptl;
page_clear_dirty(page);
set_page_dirty(page);
}
+ /*
+ * Hugepages are not counted in NR_ANON_PAGES nor NR_FILE_MAPPED
+ * and not charged by memcg for now.
+ */
+ if (unlikely(PageHuge(page)))
+ return;
if (PageAnon(page)) {
mem_cgroup_uncharge_page(page);
__dec_zone_page_state(page, NR_ANON_PAGES);
return rmap_walk_file(page, rmap_one, arg);
}
#endif /* CONFIG_MIGRATION */
+
+#ifdef CONFIG_HUGETLB_PAGE
+/*
+ * The following three functions are for anonymous (private mapped) hugepages.
+ * Unlike common anonymous pages, anonymous hugepages have no accounting code
+ * and no lru code, because we handle hugepages differently from common pages.
+ */
+static void __hugepage_set_anon_rmap(struct page *page,
+ struct vm_area_struct *vma, unsigned long address, int exclusive)
+{
+ struct anon_vma *anon_vma = vma->anon_vma;
+ BUG_ON(!anon_vma);
+ if (!exclusive) {
+ struct anon_vma_chain *avc;
+ avc = list_entry(vma->anon_vma_chain.prev,
+ struct anon_vma_chain, same_vma);
+ anon_vma = avc->anon_vma;
+ }
+ anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON;
+ page->mapping = (struct address_space *) anon_vma;
+ page->index = linear_page_index(vma, address);
+}
+
+void hugepage_add_anon_rmap(struct page *page,
+ struct vm_area_struct *vma, unsigned long address)
+{
+ struct anon_vma *anon_vma = vma->anon_vma;
+ int first;
+ BUG_ON(!anon_vma);
+ BUG_ON(address < vma->vm_start || address >= vma->vm_end);
+ first = atomic_inc_and_test(&page->_mapcount);
+ if (first)
+ __hugepage_set_anon_rmap(page, vma, address, 0);
+}
+
+void hugepage_add_new_anon_rmap(struct page *page,
+ struct vm_area_struct *vma, unsigned long address)
+{
+ BUG_ON(address < vma->vm_start || address >= vma->vm_end);
+ atomic_set(&page->_mapcount, 0);
+ __hugepage_set_anon_rmap(page, vma, address, 1);
+}
+#endif /* CONFIG_HUGETLB_PAGE */
loff_t newsize = attr->ia_size;
int error;
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+
if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)
&& newsize != inode->i_size) {
struct page *page = NULL;
}
}
- error = simple_setsize(inode, newsize);
+ /* XXX(truncate): truncate_setsize should be called last */
+ truncate_setsize(inode, newsize);
if (page)
page_cache_release(page);
- if (error)
- return error;
shmem_truncate_range(inode, newsize, (loff_t)-1);
}
- error = inode_change_ok(inode, attr);
- if (!error)
- generic_setattr(inode, attr);
+ setattr_copy(inode, attr);
#ifdef CONFIG_TMPFS_POSIX_ACL
- if (!error && (attr->ia_valid & ATTR_MODE))
+ if (attr->ia_valid & ATTR_MODE)
error = generic_acl_chmod(inode);
#endif
return error;
}
-static void shmem_delete_inode(struct inode *inode)
+static void shmem_evict_inode(struct inode *inode)
{
struct shmem_inode_info *info = SHMEM_I(inode);
}
BUG_ON(inode->i_blocks);
shmem_free_inode(inode->i_sb);
- clear_inode(inode);
+ end_writeback(inode);
}
static inline int shmem_find_swp(swp_entry_t entry, swp_entry_t *dir, swp_entry_t *edir)
/*
* Move _head_ to start search for next from here.
- * But be careful: shmem_delete_inode checks list_empty without taking
+ * But be careful: shmem_evict_inode checks list_empty without taking
* mutex, and there's an instant in list_move_tail when info->swaplist
* would appear empty, if it were the only one on shmem_swaplist. We
* could avoid doing it if inode NULL; or use this minor optimization.
static void shmem_put_super(struct super_block *sb)
{
- kfree(sb->s_fs_info);
+ struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
+
+ percpu_counter_destroy(&sbinfo->used_blocks);
+ kfree(sbinfo);
sb->s_fs_info = NULL;
}
#endif
spin_lock_init(&sbinfo->stat_lock);
- percpu_counter_init(&sbinfo->used_blocks, 0);
+ if (percpu_counter_init(&sbinfo->used_blocks, 0))
+ goto failed;
sbinfo->free_inodes = sbinfo->max_inodes;
sb->s_maxbytes = SHMEM_MAX_BYTES;
.remount_fs = shmem_remount_fs,
.show_options = shmem_show_options,
#endif
- .delete_inode = shmem_delete_inode,
+ .evict_inode = shmem_evict_inode,
.drop_inode = generic_delete_inode,
.put_super = shmem_put_super,
};
}
EXPORT_SYMBOL(truncate_pagecache);
+/**
+ * truncate_setsize - update inode and pagecache for a new file size
+ * @inode: inode
+ * @newsize: new file size
+ *
+ * truncate_setsize updastes i_size update and performs pagecache
+ * truncation (if necessary) for a file size updates. It will be
+ * typically be called from the filesystem's setattr function when
+ * ATTR_SIZE is passed in.
+ *
+ * Must be called with inode_mutex held and after all filesystem
+ * specific block truncation has been performed.
+ */
+void truncate_setsize(struct inode *inode, loff_t newsize)
+{
+ loff_t oldsize;
+
+ oldsize = inode->i_size;
+ i_size_write(inode, newsize);
+
+ truncate_pagecache(inode, oldsize, newsize);
+}
+EXPORT_SYMBOL(truncate_setsize);
+
/**
* vmtruncate - unmap mappings "freed" by truncate() syscall
* @inode: inode of the file used
* @offset: file offset to start truncating
*
- * NOTE! We have to be ready to update the memory sharing
- * between the file and the memory map for a potential last
- * incomplete page. Ugly, but necessary.
- *
- * This function is deprecated and simple_setsize or truncate_pagecache
- * should be used instead.
+ * This function is deprecated and truncate_setsize or truncate_pagecache
+ * should be used instead, together with filesystem specific block truncation.
*/
int vmtruncate(struct inode *inode, loff_t offset)
{
int error;
- error = simple_setsize(inode, offset);
+ error = inode_newsize_ok(inode, offset);
if (error)
return error;
+ truncate_setsize(inode, offset);
if (inode->i_op->truncate)
inode->i_op->truncate(inode);
-
- return error;
+ return 0;
}
EXPORT_SYMBOL(vmtruncate);
#include <asm/tlbflush.h>
#include <asm/shmparam.h>
+bool vmap_lazy_unmap __read_mostly = true;
/*** Page table manipulation functions ***/
{
unsigned int log;
+ if (!vmap_lazy_unmap)
+ return 0;
+
log = fls(num_online_cpus());
return log * (32UL * 1024 * 1024 / PAGE_SIZE);
unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
gfp_t gfp_mask, bool noswap,
unsigned int swappiness,
- struct zone *zone, int nid)
+ struct zone *zone)
{
struct scan_control sc = {
+ .nr_to_reclaim = SWAP_CLUSTER_MAX,
.may_writepage = !laptop_mode,
.may_unmap = 1,
.may_swap = !noswap,
.order = 0,
.mem_cgroup = mem,
};
- nodemask_t nm = nodemask_of_node(nid);
-
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
- sc.nodemask = &nm;
- sc.nr_reclaimed = 0;
- sc.nr_scanned = 0;
trace_mm_vmscan_memcg_softlimit_reclaim_begin(0,
sc.may_writepage,
for (i = 0; i <= end_zone; i++) {
struct zone *zone = pgdat->node_zones + i;
int nr_slab;
- int nid, zid;
if (!populated_zone(zone))
continue;
sc.nr_scanned = 0;
- nid = pgdat->node_id;
- zid = zone_idx(zone);
/*
* Call soft limit reclaim before calling shrink_zone.
* For now we ignore the return value
*/
- mem_cgroup_soft_limit_reclaim(zone, order, sc.gfp_mask,
- nid, zid);
+ mem_cgroup_soft_limit_reclaim(zone, order, sc.gfp_mask);
+
/*
* We put equal pressure on every zone, unless one
* zone has way too many pages free already.
case L2CAP_MODE_ERTM:
pi->remote_tx_win = rfc.txwin_size;
pi->remote_max_tx = rfc.max_transmit;
- if (rfc.max_pdu_size > pi->conn->mtu - 10)
- rfc.max_pdu_size = le16_to_cpu(pi->conn->mtu - 10);
+
+ if (le16_to_cpu(rfc.max_pdu_size) > pi->conn->mtu - 10)
+ rfc.max_pdu_size = cpu_to_le16(pi->conn->mtu - 10);
pi->remote_mps = le16_to_cpu(rfc.max_pdu_size);
break;
case L2CAP_MODE_STREAMING:
- if (rfc.max_pdu_size > pi->conn->mtu - 10)
- rfc.max_pdu_size = le16_to_cpu(pi->conn->mtu - 10);
+ if (le16_to_cpu(rfc.max_pdu_size) > pi->conn->mtu - 10)
+ rfc.max_pdu_size = cpu_to_le16(pi->conn->mtu - 10);
pi->remote_mps = le16_to_cpu(rfc.max_pdu_size);
if (*result == L2CAP_CONF_SUCCESS) {
switch (rfc.mode) {
case L2CAP_MODE_ERTM:
- pi->remote_tx_win = rfc.txwin_size;
pi->retrans_timeout = le16_to_cpu(rfc.retrans_timeout);
pi->monitor_timeout = le16_to_cpu(rfc.monitor_timeout);
pi->mps = le16_to_cpu(rfc.max_pdu_size);
done:
switch (rfc.mode) {
case L2CAP_MODE_ERTM:
- pi->remote_tx_win = rfc.txwin_size;
pi->retrans_timeout = le16_to_cpu(rfc.retrans_timeout);
pi->monitor_timeout = le16_to_cpu(rfc.monitor_timeout);
pi->mps = le16_to_cpu(rfc.max_pdu_size);
#include <linux/hardirq.h>
#include <net/caif/cfpkt.h>
-#define PKT_PREFIX 16
+#define PKT_PREFIX 48
#define PKT_POSTFIX 2
#define PKT_LEN_WHEN_EXTENDING 128
#define PKT_ERROR(pkt, errmsg) do { \
#include <net/sock.h>
#include <net/net_namespace.h>
+/*
+ * To send multiple CAN frame content within TX_SETUP or to filter
+ * CAN messages with multiplex index within RX_SETUP, the number of
+ * different filters is limited to 256 due to the one byte index value.
+ */
+#define MAX_NFRAMES 256
+
/* use of last_frames[index].can_dlc */
#define RX_RECV 0x40 /* received data for this element */
#define RX_THR 0x80 /* element not been sent due to throttle feature */
struct list_head list;
int ifindex;
canid_t can_id;
- int flags;
+ u32 flags;
unsigned long frames_abs, frames_filtered;
struct timeval ival1, ival2;
struct hrtimer timer, thrtimer;
struct tasklet_struct tsklet, thrtsklet;
ktime_t rx_stamp, kt_ival1, kt_ival2, kt_lastmsg;
int rx_ifindex;
- int count;
- int nframes;
- int currframe;
+ u32 count;
+ u32 nframes;
+ u32 currframe;
struct can_frame *frames;
struct can_frame *last_frames;
struct can_frame sframe;
seq_printf(m, "rx_op: %03X %-5s ",
op->can_id, bcm_proc_getifname(ifname, op->ifindex));
- seq_printf(m, "[%d]%c ", op->nframes,
+ seq_printf(m, "[%u]%c ", op->nframes,
(op->flags & RX_CHECK_DLC)?'d':' ');
if (op->kt_ival1.tv64)
seq_printf(m, "timeo=%lld ",
list_for_each_entry(op, &bo->tx_ops, list) {
- seq_printf(m, "tx_op: %03X %s [%d] ",
+ seq_printf(m, "tx_op: %03X %s [%u] ",
op->can_id,
bcm_proc_getifname(ifname, op->ifindex),
op->nframes);
struct can_frame *firstframe;
struct sockaddr_can *addr;
struct sock *sk = op->sk;
- int datalen = head->nframes * CFSIZ;
+ unsigned int datalen = head->nframes * CFSIZ;
int err;
skb = alloc_skb(sizeof(*head) + datalen, gfp_any());
* bcm_rx_cmp_to_index - (bit)compares the currently received data to formerly
* received data stored in op->last_frames[]
*/
-static void bcm_rx_cmp_to_index(struct bcm_op *op, int index,
+static void bcm_rx_cmp_to_index(struct bcm_op *op, unsigned int index,
const struct can_frame *rxdata)
{
/*
/*
* bcm_rx_do_flush - helper for bcm_rx_thr_flush
*/
-static inline int bcm_rx_do_flush(struct bcm_op *op, int update, int index)
+static inline int bcm_rx_do_flush(struct bcm_op *op, int update,
+ unsigned int index)
{
if ((op->last_frames) && (op->last_frames[index].can_dlc & RX_THR)) {
if (update)
int updated = 0;
if (op->nframes > 1) {
- int i;
+ unsigned int i;
/* for MUX filter we start at index 1 */
for (i = 1; i < op->nframes; i++)
{
struct bcm_op *op = (struct bcm_op *)data;
const struct can_frame *rxframe = (struct can_frame *)skb->data;
- int i;
+ unsigned int i;
/* disable timeout */
hrtimer_cancel(&op->timer);
{
struct bcm_sock *bo = bcm_sk(sk);
struct bcm_op *op;
- int i, err;
+ unsigned int i;
+ int err;
/* we need a real device to send frames */
if (!ifindex)
return -ENODEV;
- /* we need at least one can_frame */
- if (msg_head->nframes < 1)
+ /* check nframes boundaries - we need at least one can_frame */
+ if (msg_head->nframes < 1 || msg_head->nframes > MAX_NFRAMES)
return -EINVAL;
/* check the given can_id */
msg_head->nframes = 0;
}
+ /* the first element contains the mux-mask => MAX_NFRAMES + 1 */
+ if (msg_head->nframes > MAX_NFRAMES + 1)
+ return -EINVAL;
+
if ((msg_head->flags & RX_RTR_FRAME) &&
((msg_head->nframes != 1) ||
(!(msg_head->can_id & CAN_RTR_FLAG))))
put_page(skb_shinfo(skb)->frags[0].page);
memmove(skb_shinfo(skb)->frags,
skb_shinfo(skb)->frags + 1,
- --skb_shinfo(skb)->nr_frags);
+ --skb_shinfo(skb)->nr_frags * sizeof(skb_frag_t));
}
}
#include <linux/kernel.h>
#include <linux/keyctl.h>
#include <linux/err.h>
+#include <linux/seq_file.h>
#include <keys/dns_resolver-type.h>
#include <keys/user-type.h>
#include "internal.h"
const struct cred *dns_resolver_cache;
+#define DNS_ERRORNO_OPTION "dnserror"
+
/*
* Instantiate a user defined key for dns_resolver.
*
dns_resolver_instantiate(struct key *key, const void *_data, size_t datalen)
{
struct user_key_payload *upayload;
+ unsigned long derrno;
int ret;
size_t result_len = 0;
- const char *data = _data, *opt;
+ const char *data = _data, *end, *opt;
kenter("%%%d,%s,'%s',%zu",
key->serial, key->description, data, datalen);
datalen--;
/* deal with any options embedded in the data */
+ end = data + datalen;
opt = memchr(data, '#', datalen);
if (!opt) {
- kdebug("no options currently supported");
- return -EINVAL;
+ /* no options: the entire data is the result */
+ kdebug("no options");
+ result_len = datalen;
+ } else {
+ const char *next_opt;
+
+ result_len = opt - data;
+ opt++;
+ kdebug("options: '%s'", opt);
+ do {
+ const char *eq;
+ int opt_len, opt_nlen, opt_vlen, tmp;
+
+ next_opt = memchr(opt, '#', end - opt) ?: end;
+ opt_len = next_opt - opt;
+ if (!opt_len) {
+ printk(KERN_WARNING
+ "Empty option to dns_resolver key %d\n",
+ key->serial);
+ return -EINVAL;
+ }
+
+ eq = memchr(opt, '=', opt_len) ?: end;
+ opt_nlen = eq - opt;
+ eq++;
+ opt_vlen = next_opt - eq; /* will be -1 if no value */
+
+ tmp = opt_vlen >= 0 ? opt_vlen : 0;
+ kdebug("option '%*.*s' val '%*.*s'",
+ opt_nlen, opt_nlen, opt, tmp, tmp, eq);
+
+ /* see if it's an error number representing a DNS error
+ * that's to be recorded as the result in this key */
+ if (opt_nlen == sizeof(DNS_ERRORNO_OPTION) - 1 &&
+ memcmp(opt, DNS_ERRORNO_OPTION, opt_nlen) == 0) {
+ kdebug("dns error number option");
+ if (opt_vlen <= 0)
+ goto bad_option_value;
+
+ ret = strict_strtoul(eq, 10, &derrno);
+ if (ret < 0)
+ goto bad_option_value;
+
+ if (derrno < 1 || derrno > 511)
+ goto bad_option_value;
+
+ kdebug("dns error no. = %lu", derrno);
+ key->type_data.x[0] = -derrno;
+ continue;
+ }
+
+ bad_option_value:
+ printk(KERN_WARNING
+ "Option '%*.*s' to dns_resolver key %d:"
+ " bad/missing value\n",
+ opt_nlen, opt_nlen, opt, key->serial);
+ return -EINVAL;
+ } while (opt = next_opt + 1, opt < end);
+ }
+
+ /* don't cache the result if we're caching an error saying there's no
+ * result */
+ if (key->type_data.x[0]) {
+ kleave(" = 0 [h_error %ld]", key->type_data.x[0]);
+ return 0;
}
- result_len = datalen;
+ kdebug("store result");
ret = key_payload_reserve(key, result_len);
if (ret < 0)
return -EINVAL;
return ret;
}
+/*
+ * Describe a DNS key
+ */
+static void dns_resolver_describe(const struct key *key, struct seq_file *m)
+{
+ int err = key->type_data.x[0];
+
+ seq_puts(m, key->description);
+ if (err)
+ seq_printf(m, ": %d", err);
+ else
+ seq_printf(m, ": %u", key->datalen);
+}
+
struct key_type key_type_dns_resolver = {
.name = "dns_resolver",
.instantiate = dns_resolver_instantiate,
.match = dns_resolver_match,
.revoke = user_revoke,
.destroy = user_destroy,
- .describe = user_describe,
+ .describe = dns_resolver_describe,
.read = user_read,
};
if (ret < 0)
goto put;
+ /* If the DNS server gave an error, return that to the caller */
+ ret = rkey->type_data.x[0];
+ if (ret)
+ goto put;
+
upayload = rcu_dereference_protected(rkey->payload.data,
lockdep_is_held(&rkey->sem));
len = upayload->datalen;
menuconfig NET_DSA
bool "Distributed Switch Architecture support"
default n
- depends on EXPERIMENTAL && NET_ETHERNET && !S390
+ depends on EXPERIMENTAL && NETDEVICES && !S390
select PHYLIB
---help---
This allows you to use hardware switch chips that use
if (cpu == curcpu)
continue;
i = 0;
+ local_bh_disable();
xt_info_wrlock(cpu);
xt_entry_foreach(iter, t->entries[cpu], t->size) {
ADD_COUNTER(counters[i], iter->counters.bcnt,
++i;
}
xt_info_wrunlock(cpu);
+ local_bh_enable();
}
put_cpu();
}
if (cpu == curcpu)
continue;
i = 0;
+ local_bh_disable();
xt_info_wrlock(cpu);
xt_entry_foreach(iter, t->entries[cpu], t->size) {
ADD_COUNTER(counters[i], iter->counters.bcnt,
++i; /* macro does multi eval of i */
}
xt_info_wrunlock(cpu);
+ local_bh_enable();
}
put_cpu();
}
if (cpu == curcpu)
continue;
i = 0;
+ local_bh_disable();
xt_info_wrlock(cpu);
xt_entry_foreach(iter, t->entries[cpu], t->size) {
ADD_COUNTER(counters[i], iter->counters.bcnt,
++i;
}
xt_info_wrunlock(cpu);
+ local_bh_enable();
}
put_cpu();
}
.data = &init_net.ipv6.sysctl.ip6_rt_gc_elasticity,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = proc_dointvec_jiffies,
+ .proc_handler = proc_dointvec,
},
{
.procname = "mtu_expires",
.data = &init_net.ipv6.sysctl.ip6_rt_min_advmss,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = proc_dointvec_jiffies,
+ .proc_handler = proc_dointvec,
},
{
.procname = "gc_min_interval_ms",
struct rate_control_ops *ops;
const char *alg_name;
+ kparam_block_sysfs_write(ieee80211_default_rc_algo);
if (!name)
alg_name = ieee80211_default_rc_algo;
else
/* try built-in one if specific alg requested but not found */
if (!ops && strlen(CONFIG_MAC80211_RC_DEFAULT))
ops = ieee80211_try_rate_control_ops_get(CONFIG_MAC80211_RC_DEFAULT);
+ kparam_unblock_sysfs_write(ieee80211_default_rc_algo);
return ops;
}
struct netlink_sock *nlk = nlk_sk(sk);
int noblock = flags&MSG_DONTWAIT;
size_t copied;
- struct sk_buff *skb;
+ struct sk_buff *skb, *frag __maybe_unused = NULL;
int err;
if (flags&MSG_OOB)
kfree_skb(skb);
skb = compskb;
} else {
- /*
- * Before setting frag_list to NULL, we must get a
- * private copy of skb if shared (because of MSG_PEEK)
- */
- if (skb_shared(skb)) {
- struct sk_buff *nskb;
-
- nskb = pskb_copy(skb, GFP_KERNEL);
- kfree_skb(skb);
- skb = nskb;
- err = -ENOMEM;
- if (!skb)
- goto out;
- }
- kfree_skb(skb_shinfo(skb)->frag_list);
+ frag = skb_shinfo(skb)->frag_list;
skb_shinfo(skb)->frag_list = NULL;
}
}
if (flags & MSG_TRUNC)
copied = skb->len;
+#ifdef CONFIG_COMPAT_NETLINK_MESSAGES
+ skb_shinfo(skb)->frag_list = frag;
+#endif
+
skb_free_datagram(sk, skb);
if (nlk->cb && atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf / 2)
#define dbgprintk(FMT,...) \
printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
-/* make sure we maintain the format strings, even when debugging is disabled */
-static inline __attribute__((format(printf,1,2)))
-void _dbprintk(const char *fmt, ...)
-{
-}
-
#define kenter(FMT,...) dbgprintk("==> %s("FMT")",__func__ ,##__VA_ARGS__)
#define kleave(FMT,...) dbgprintk("<== %s()"FMT"",__func__ ,##__VA_ARGS__)
#define kdebug(FMT,...) dbgprintk(" "FMT ,##__VA_ARGS__)
} while (0)
#else
-#define _enter(FMT,...) _dbprintk("==> %s("FMT")",__func__ ,##__VA_ARGS__)
-#define _leave(FMT,...) _dbprintk("<== %s()"FMT"",__func__ ,##__VA_ARGS__)
-#define _debug(FMT,...) _dbprintk(" "FMT ,##__VA_ARGS__)
-#define _proto(FMT,...) _dbprintk("### "FMT ,##__VA_ARGS__)
-#define _net(FMT,...) _dbprintk("@@@ "FMT ,##__VA_ARGS__)
+#define _enter(FMT,...) no_printk("==> %s("FMT")",__func__ ,##__VA_ARGS__)
+#define _leave(FMT,...) no_printk("<== %s()"FMT"",__func__ ,##__VA_ARGS__)
+#define _debug(FMT,...) no_printk(" "FMT ,##__VA_ARGS__)
+#define _proto(FMT,...) no_printk("### "FMT ,##__VA_ARGS__)
+#define _net(FMT,...) no_printk("@@@ "FMT ,##__VA_ARGS__)
#endif
/*
static int tcf_gact_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref)
{
unsigned char *b = skb_tail_pointer(skb);
- struct tc_gact opt;
struct tcf_gact *gact = a->priv;
+ struct tc_gact opt = {
+ .index = gact->tcf_index,
+ .refcnt = gact->tcf_refcnt - ref,
+ .bindcnt = gact->tcf_bindcnt - bind,
+ .action = gact->tcf_action,
+ };
struct tcf_t t;
- opt.index = gact->tcf_index;
- opt.refcnt = gact->tcf_refcnt - ref;
- opt.bindcnt = gact->tcf_bindcnt - bind;
- opt.action = gact->tcf_action;
NLA_PUT(skb, TCA_GACT_PARMS, sizeof(opt), &opt);
#ifdef CONFIG_GACT_PROB
if (gact->tcfg_ptype) {
- struct tc_gact_p p_opt;
- p_opt.paction = gact->tcfg_paction;
- p_opt.pval = gact->tcfg_pval;
- p_opt.ptype = gact->tcfg_ptype;
+ struct tc_gact_p p_opt = {
+ .paction = gact->tcfg_paction,
+ .pval = gact->tcfg_pval,
+ .ptype = gact->tcfg_ptype,
+ };
+
NLA_PUT(skb, TCA_GACT_PROB, sizeof(p_opt), &p_opt);
}
#endif
{
unsigned char *b = skb_tail_pointer(skb);
struct tcf_mirred *m = a->priv;
- struct tc_mirred opt;
+ struct tc_mirred opt = {
+ .index = m->tcf_index,
+ .action = m->tcf_action,
+ .refcnt = m->tcf_refcnt - ref,
+ .bindcnt = m->tcf_bindcnt - bind,
+ .eaction = m->tcfm_eaction,
+ .ifindex = m->tcfm_ifindex,
+ };
struct tcf_t t;
- opt.index = m->tcf_index;
- opt.action = m->tcf_action;
- opt.refcnt = m->tcf_refcnt - ref;
- opt.bindcnt = m->tcf_bindcnt - bind;
- opt.eaction = m->tcfm_eaction;
- opt.ifindex = m->tcfm_ifindex;
NLA_PUT(skb, TCA_MIRRED_PARMS, sizeof(opt), &opt);
t.install = jiffies_to_clock_t(jiffies - m->tcf_tm.install);
t.lastuse = jiffies_to_clock_t(jiffies - m->tcf_tm.lastuse);
{
unsigned char *b = skb_tail_pointer(skb);
struct tcf_nat *p = a->priv;
- struct tc_nat opt;
+ struct tc_nat opt = {
+ .old_addr = p->old_addr,
+ .new_addr = p->new_addr,
+ .mask = p->mask,
+ .flags = p->flags,
+
+ .index = p->tcf_index,
+ .action = p->tcf_action,
+ .refcnt = p->tcf_refcnt - ref,
+ .bindcnt = p->tcf_bindcnt - bind,
+ };
struct tcf_t t;
- opt.old_addr = p->old_addr;
- opt.new_addr = p->new_addr;
- opt.mask = p->mask;
- opt.flags = p->flags;
-
- opt.index = p->tcf_index;
- opt.action = p->tcf_action;
- opt.refcnt = p->tcf_refcnt - ref;
- opt.bindcnt = p->tcf_bindcnt - bind;
-
NLA_PUT(skb, TCA_NAT_PARMS, sizeof(opt), &opt);
t.install = jiffies_to_clock_t(jiffies - p->tcf_tm.install);
t.lastuse = jiffies_to_clock_t(jiffies - p->tcf_tm.lastuse);
{
unsigned char *b = skb_tail_pointer(skb);
struct tcf_defact *d = a->priv;
- struct tc_defact opt;
+ struct tc_defact opt = {
+ .index = d->tcf_index,
+ .refcnt = d->tcf_refcnt - ref,
+ .bindcnt = d->tcf_bindcnt - bind,
+ .action = d->tcf_action,
+ };
struct tcf_t t;
- opt.index = d->tcf_index;
- opt.refcnt = d->tcf_refcnt - ref;
- opt.bindcnt = d->tcf_bindcnt - bind;
- opt.action = d->tcf_action;
NLA_PUT(skb, TCA_DEF_PARMS, sizeof(opt), &opt);
NLA_PUT_STRING(skb, TCA_DEF_DATA, d->tcfd_defdata);
t.install = jiffies_to_clock_t(jiffies - d->tcf_tm.install);
{
unsigned char *b = skb_tail_pointer(skb);
struct tcf_skbedit *d = a->priv;
- struct tc_skbedit opt;
+ struct tc_skbedit opt = {
+ .index = d->tcf_index,
+ .refcnt = d->tcf_refcnt - ref,
+ .bindcnt = d->tcf_bindcnt - bind,
+ .action = d->tcf_action,
+ };
struct tcf_t t;
- opt.index = d->tcf_index;
- opt.refcnt = d->tcf_refcnt - ref;
- opt.bindcnt = d->tcf_bindcnt - bind;
- opt.action = d->tcf_action;
NLA_PUT(skb, TCA_SKBEDIT_PARMS, sizeof(opt), &opt);
if (d->flags & SKBEDIT_F_PRIORITY)
NLA_PUT(skb, TCA_SKBEDIT_PRIORITY, sizeof(d->priority),
if (qops->enqueue == NULL)
qops->enqueue = noop_qdisc_ops.enqueue;
if (qops->peek == NULL) {
- if (qops->dequeue == NULL) {
+ if (qops->dequeue == NULL)
qops->peek = noop_qdisc_ops.peek;
- } else {
- rc = -EINVAL;
- goto out;
- }
+ else
+ goto out_einval;
}
if (qops->dequeue == NULL)
qops->dequeue = noop_qdisc_ops.dequeue;
+ if (qops->cl_ops) {
+ const struct Qdisc_class_ops *cops = qops->cl_ops;
+
+ if (!(cops->get && cops->put && cops->walk && cops->leaf))
+ goto out_einval;
+
+ if (cops->tcf_chain && !(cops->bind_tcf && cops->unbind_tcf))
+ goto out_einval;
+ }
+
qops->next = NULL;
*qp = qops;
rc = 0;
out:
write_unlock(&qdisc_mod_lock);
return rc;
+
+out_einval:
+ rc = -EINVAL;
+ goto out;
}
EXPORT_SYMBOL(register_qdisc);
}
ret = qdisc_enqueue(skb, flow->q);
- if (ret != 0) {
+ if (ret != NET_XMIT_SUCCESS) {
drop: __maybe_unused
if (net_xmit_drop_count(ret)) {
sch->qstats.drops++;
*/
if (flow == &p->link) {
sch->q.qlen++;
- return 0;
+ return NET_XMIT_SUCCESS;
}
tasklet_schedule(&p->task);
return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
if (++sch->q.qlen <= q->limit) {
sch->bstats.bytes += qdisc_pkt_len(skb);
sch->bstats.packets++;
- return 0;
+ return NET_XMIT_SUCCESS;
}
sfq_drop(sch);
return -1;
}
+static struct Qdisc *sfq_leaf(struct Qdisc *sch, unsigned long arg)
+{
+ return NULL;
+}
+
static unsigned long sfq_get(struct Qdisc *sch, u32 classid)
{
return 0;
return 0;
}
+static void sfq_put(struct Qdisc *q, unsigned long cl)
+{
+}
+
static struct tcf_proto **sfq_find_tcf(struct Qdisc *sch, unsigned long cl)
{
struct sfq_sched_data *q = qdisc_priv(sch);
}
static const struct Qdisc_class_ops sfq_class_ops = {
+ .leaf = sfq_leaf,
.get = sfq_get,
+ .put = sfq_put,
.tcf_chain = sfq_find_tcf,
.bind_tcf = sfq_bind,
+ .unbind_tcf = sfq_put,
.dump = sfq_dump_class,
.dump_stats = sfq_dump_class_stats,
.walk = sfq_walk,
return qdisc_reshape_fail(skb, sch);
ret = qdisc_enqueue(skb, q->qdisc);
- if (ret != 0) {
+ if (ret != NET_XMIT_SUCCESS) {
if (net_xmit_drop_count(ret))
sch->qstats.drops++;
return ret;
sch->q.qlen++;
sch->bstats.bytes += qdisc_pkt_len(skb);
sch->bstats.packets++;
- return 0;
+ return NET_XMIT_SUCCESS;
}
static unsigned int tbf_drop(struct Qdisc* sch)
__skb_queue_tail(&q->q, skb);
sch->bstats.bytes += qdisc_pkt_len(skb);
sch->bstats.packets++;
- return 0;
+ return NET_XMIT_SUCCESS;
}
kfree_skb(skb);
static unsigned long number_cred_unused;
#define MAX_HASHTABLE_BITS (10)
-static int param_set_hashtbl_sz(const char *val, struct kernel_param *kp)
+static int param_set_hashtbl_sz(const char *val, const struct kernel_param *kp)
{
unsigned long num;
unsigned int nbits;
return -EINVAL;
}
-static int param_get_hashtbl_sz(char *buffer, struct kernel_param *kp)
+static int param_get_hashtbl_sz(char *buffer, const struct kernel_param *kp)
{
unsigned int nbits;
#define param_check_hashtbl_sz(name, p) __param_check(name, p, unsigned int);
+static struct kernel_param_ops param_ops_hashtbl_sz = {
+ .set = param_set_hashtbl_sz,
+ .get = param_get_hashtbl_sz,
+};
+
module_param_named(auth_hashtable_size, auth_hashbits, hashtbl_sz, 0644);
MODULE_PARM_DESC(auth_hashtable_size, "RPC credential cache hashtable size");
xprt_unregister_transport(&xs_bc_tcp_transport);
}
-static int param_set_uint_minmax(const char *val, struct kernel_param *kp,
+static int param_set_uint_minmax(const char *val,
+ const struct kernel_param *kp,
unsigned int min, unsigned int max)
{
unsigned long num;
return 0;
}
-static int param_set_portnr(const char *val, struct kernel_param *kp)
+static int param_set_portnr(const char *val, const struct kernel_param *kp)
{
return param_set_uint_minmax(val, kp,
RPC_MIN_RESVPORT,
RPC_MAX_RESVPORT);
}
-static int param_get_portnr(char *buffer, struct kernel_param *kp)
-{
- return param_get_uint(buffer, kp);
-}
+static struct kernel_param_ops param_ops_portnr = {
+ .set = param_set_portnr,
+ .get = param_get_uint,
+};
+
#define param_check_portnr(name, p) \
__param_check(name, p, unsigned int);
module_param_named(min_resvport, xprt_min_resvport, portnr, 0644);
module_param_named(max_resvport, xprt_max_resvport, portnr, 0644);
-static int param_set_slot_table_size(const char *val, struct kernel_param *kp)
+static int param_set_slot_table_size(const char *val,
+ const struct kernel_param *kp)
{
return param_set_uint_minmax(val, kp,
RPC_MIN_SLOT_TABLE,
RPC_MAX_SLOT_TABLE);
}
-static int param_get_slot_table_size(char *buffer, struct kernel_param *kp)
-{
- return param_get_uint(buffer, kp);
-}
+static struct kernel_param_ops param_ops_slot_table_size = {
+ .set = param_set_slot_table_size,
+ .get = param_get_uint,
+};
+
#define param_check_slot_table_size(name, p) \
__param_check(name, p, unsigned int);
return -EINVAL;
if (mgmt->u.action.category != WLAN_CATEGORY_PUBLIC) {
/* Verify that we are associated with the destination AP */
+ wdev_lock(wdev);
+
if (!wdev->current_bss ||
memcmp(wdev->current_bss->pub.bssid, mgmt->bssid,
ETH_ALEN) != 0 ||
(wdev->iftype == NL80211_IFTYPE_STATION &&
memcmp(wdev->current_bss->pub.bssid, mgmt->da,
- ETH_ALEN) != 0))
+ ETH_ALEN) != 0)) {
+ wdev_unlock(wdev);
return -ENOTCONN;
+ }
+
+ wdev_unlock(wdev);
}
if (memcmp(mgmt->sa, dev->dev_addr, ETH_ALEN) != 0)
if (p->dir > XFRM_POLICY_OUT)
return NULL;
- xp = xfrm_policy_alloc(net, GFP_KERNEL);
+ xp = xfrm_policy_alloc(net, GFP_ATOMIC);
if (xp == NULL) {
*dir = -ENOBUFS;
return NULL;
help
This builds kernel hardware breakpoint example modules.
+config SAMPLE_KFIFO
+ tristate "Build kfifo examples -- loadable modules only"
+ depends on m
+ help
+ This config option will allow you to build a number of
+ different kfifo sample modules showing how to use the
+ generic kfifo API.
+
+ If in doubt, say "N" here.
+
endif # SAMPLES
# Makefile for Linux samples code
obj-$(CONFIG_SAMPLES) += kobject/ kprobes/ tracepoints/ trace_events/ \
- hw_breakpoint/
+ hw_breakpoint/ kfifo/
--- /dev/null
+obj-$(CONFIG_SAMPLE_KFIFO) += bytestream-example.o dma-example.o inttype-example.o record-example.o
--- /dev/null
+/*
+ * Sample kfifo byte stream implementation
+ *
+ * Copyright (C) 2010 Stefani Seibold <stefani@seibold.net>
+ *
+ * Released under the GPL version 2 only.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <linux/mutex.h>
+#include <linux/kfifo.h>
+
+/*
+ * This module shows how to create a byte stream fifo.
+ */
+
+/* fifo size in elements (bytes) */
+#define FIFO_SIZE 32
+
+/* name of the proc entry */
+#define PROC_FIFO "bytestream-fifo"
+
+/* lock for procfs read access */
+static DEFINE_MUTEX(read_lock);
+
+/* lock for procfs write access */
+static DEFINE_MUTEX(write_lock);
+
+/*
+ * define DYNAMIC in this example for a dynamically allocated fifo.
+ *
+ * Otherwise the fifo storage will be a part of the fifo structure.
+ */
+#if 0
+#define DYNAMIC
+#endif
+
+#ifdef DYNAMIC
+static struct kfifo test;
+#else
+static DECLARE_KFIFO(test, unsigned char, FIFO_SIZE);
+#endif
+
+static int __init testfunc(void)
+{
+ unsigned char buf[6];
+ unsigned char i;
+ unsigned int ret;
+
+ printk(KERN_INFO "byte stream fifo test start\n");
+
+ /* put string into the fifo */
+ kfifo_in(&test, "hello", 5);
+
+ /* put values into the fifo */
+ for (i = 0; i != 10; i++)
+ kfifo_put(&test, &i);
+
+ /* show the number of used elements */
+ printk(KERN_INFO "fifo len: %u\n", kfifo_len(&test));
+
+ /* get max of 5 bytes from the fifo */
+ i = kfifo_out(&test, buf, 5);
+ printk(KERN_INFO "buf: %.*s\n", i, buf);
+
+ /* get max of 2 elements from the fifo */
+ ret = kfifo_out(&test, buf, 2);
+ printk(KERN_INFO "ret: %d\n", ret);
+ /* and put it back to the end of the fifo */
+ ret = kfifo_in(&test, buf, ret);
+ printk(KERN_INFO "ret: %d\n", ret);
+
+ /* put values into the fifo until is full */
+ for (i = 20; kfifo_put(&test, &i); i++)
+ ;
+
+ printk(KERN_INFO "queue len: %u\n", kfifo_len(&test));
+
+ /* print out all values in the fifo */
+ while (kfifo_get(&test, &i))
+ printk("%d ", i);
+ printk("\n");
+
+ return 0;
+}
+
+static ssize_t fifo_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int ret;
+ unsigned int copied;
+
+ if (mutex_lock_interruptible(&write_lock))
+ return -ERESTARTSYS;
+
+ ret = kfifo_from_user(&test, buf, count, &copied);
+
+ mutex_unlock(&write_lock);
+
+ return ret ? ret : copied;
+}
+
+static ssize_t fifo_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int ret;
+ unsigned int copied;
+
+ if (mutex_lock_interruptible(&read_lock))
+ return -ERESTARTSYS;
+
+ ret = kfifo_to_user(&test, buf, count, &copied);
+
+ mutex_unlock(&read_lock);
+
+ return ret ? ret : copied;
+}
+
+static const struct file_operations fifo_fops = {
+ .owner = THIS_MODULE,
+ .read = fifo_read,
+ .write = fifo_write,
+};
+
+static int __init example_init(void)
+{
+#ifdef DYNAMIC
+ int ret;
+
+ ret = kfifo_alloc(&test, FIFO_SIZE, GFP_KERNEL);
+ if (ret) {
+ printk(KERN_ERR "error kfifo_alloc\n");
+ return ret;
+ }
+#else
+ INIT_KFIFO(test);
+#endif
+ testfunc();
+
+ if (proc_create(PROC_FIFO, 0, NULL, &fifo_fops) == NULL) {
+#ifdef DYNAMIC
+ kfifo_free(&test);
+#endif
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void __exit example_exit(void)
+{
+ remove_proc_entry(PROC_FIFO, NULL);
+#ifdef DYNAMIC
+ kfifo_free(&test);
+#endif
+}
+
+module_init(example_init);
+module_exit(example_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stefani Seibold <stefani@seibold.net>");
--- /dev/null
+/*
+ * Sample fifo dma implementation
+ *
+ * Copyright (C) 2010 Stefani Seibold <stefani@seibold.net>
+ *
+ * Released under the GPL version 2 only.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kfifo.h>
+
+/*
+ * This module shows how to handle fifo dma operations.
+ */
+
+/* fifo size in elements (bytes) */
+#define FIFO_SIZE 32
+
+static struct kfifo fifo;
+
+static int __init example_init(void)
+{
+ int i;
+ unsigned int ret;
+ struct scatterlist sg[10];
+
+ printk(KERN_INFO "DMA fifo test start\n");
+
+ if (kfifo_alloc(&fifo, FIFO_SIZE, GFP_KERNEL)) {
+ printk(KERN_ERR "error kfifo_alloc\n");
+ return 1;
+ }
+
+ printk(KERN_INFO "queue size: %u\n", kfifo_size(&fifo));
+
+ kfifo_in(&fifo, "test", 4);
+
+ for (i = 0; i != 9; i++)
+ kfifo_put(&fifo, &i);
+
+ /* kick away first byte */
+ ret = kfifo_get(&fifo, &i);
+
+ printk(KERN_INFO "queue len: %u\n", kfifo_len(&fifo));
+
+ ret = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE);
+ printk(KERN_INFO "DMA sgl entries: %d\n", ret);
+
+ /* if 0 was returned, fifo is full and no sgl was created */
+ if (ret) {
+ printk(KERN_INFO "scatterlist for receive:\n");
+ for (i = 0; i < ARRAY_SIZE(sg); i++) {
+ printk(KERN_INFO
+ "sg[%d] -> "
+ "page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",
+ i, sg[i].page_link, sg[i].offset, sg[i].length);
+
+ if (sg_is_last(&sg[i]))
+ break;
+ }
+
+ /* but here your code to setup and exectute the dma operation */
+ /* ... */
+
+ /* example: zero bytes received */
+ ret = 0;
+
+ /* finish the dma operation and update the received data */
+ kfifo_dma_in_finish(&fifo, ret);
+ }
+
+ ret = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8);
+ printk(KERN_INFO "DMA sgl entries: %d\n", ret);
+
+ /* if 0 was returned, no data was available and no sgl was created */
+ if (ret) {
+ printk(KERN_INFO "scatterlist for transmit:\n");
+ for (i = 0; i < ARRAY_SIZE(sg); i++) {
+ printk(KERN_INFO
+ "sg[%d] -> "
+ "page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",
+ i, sg[i].page_link, sg[i].offset, sg[i].length);
+
+ if (sg_is_last(&sg[i]))
+ break;
+ }
+
+ /* but here your code to setup and exectute the dma operation */
+ /* ... */
+
+ /* example: 5 bytes transmitted */
+ ret = 5;
+
+ /* finish the dma operation and update the transmitted data */
+ kfifo_dma_out_finish(&fifo, ret);
+ }
+
+ printk(KERN_INFO "queue len: %u\n", kfifo_len(&fifo));
+
+ return 0;
+}
+
+static void __exit example_exit(void)
+{
+#ifdef DYNAMIC
+ kfifo_free(&test);
+#endif
+}
+
+module_init(example_init);
+module_exit(example_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stefani Seibold <stefani@seibold.net>");
--- /dev/null
+/*
+ * Sample kfifo int type implementation
+ *
+ * Copyright (C) 2010 Stefani Seibold <stefani@seibold.net>
+ *
+ * Released under the GPL version 2 only.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <linux/mutex.h>
+#include <linux/kfifo.h>
+
+/*
+ * This module shows how to create a int type fifo.
+ */
+
+/* fifo size in elements (ints) */
+#define FIFO_SIZE 32
+
+/* name of the proc entry */
+#define PROC_FIFO "int-fifo"
+
+/* lock for procfs read access */
+static DEFINE_MUTEX(read_lock);
+
+/* lock for procfs write access */
+static DEFINE_MUTEX(write_lock);
+
+/*
+ * define DYNAMIC in this example for a dynamically allocated fifo.
+ *
+ * Otherwise the fifo storage will be a part of the fifo structure.
+ */
+#if 0
+#define DYNAMIC
+#endif
+
+#ifdef DYNAMIC
+static DECLARE_KFIFO_PTR(test, int);
+#else
+static DEFINE_KFIFO(test, int, FIFO_SIZE);
+#endif
+
+static int __init testfunc(void)
+{
+ int buf[6];
+ int i;
+ unsigned int ret;
+
+ printk(KERN_INFO "int fifo test start\n");
+
+ /* put values into the fifo */
+ for (i = 0; i != 10; i++)
+ kfifo_put(&test, &i);
+
+ /* show the number of used elements */
+ printk(KERN_INFO "fifo len: %u\n", kfifo_len(&test));
+
+ /* get max of 2 elements from the fifo */
+ ret = kfifo_out(&test, buf, 2);
+ printk(KERN_INFO "ret: %d\n", ret);
+ /* and put it back to the end of the fifo */
+ ret = kfifo_in(&test, buf, ret);
+ printk(KERN_INFO "ret: %d\n", ret);
+
+ for (i = 20; i != 30; i++)
+ kfifo_put(&test, &i);
+
+ printk(KERN_INFO "queue len: %u\n", kfifo_len(&test));
+
+ /* show the first value without removing from the fifo */
+ if (kfifo_peek(&test, &i))
+ printk(KERN_INFO "%d\n", i);
+
+ /* print out all values in the fifo */
+ while (kfifo_get(&test, &i))
+ printk("%d ", i);
+ printk("\n");
+
+ return 0;
+}
+
+static ssize_t fifo_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int ret;
+ unsigned int copied;
+
+ if (mutex_lock_interruptible(&write_lock))
+ return -ERESTARTSYS;
+
+ ret = kfifo_from_user(&test, buf, count, &copied);
+
+ mutex_unlock(&write_lock);
+
+ return ret ? ret : copied;
+}
+
+static ssize_t fifo_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int ret;
+ unsigned int copied;
+
+ if (mutex_lock_interruptible(&read_lock))
+ return -ERESTARTSYS;
+
+ ret = kfifo_to_user(&test, buf, count, &copied);
+
+ mutex_unlock(&read_lock);
+
+ return ret ? ret : copied;
+}
+
+static const struct file_operations fifo_fops = {
+ .owner = THIS_MODULE,
+ .read = fifo_read,
+ .write = fifo_write,
+};
+
+static int __init example_init(void)
+{
+#ifdef DYNAMIC
+ int ret;
+
+ ret = kfifo_alloc(&test, FIFO_SIZE, GFP_KERNEL);
+ if (ret) {
+ printk(KERN_ERR "error kfifo_alloc\n");
+ return ret;
+ }
+#endif
+ testfunc();
+
+ if (proc_create(PROC_FIFO, 0, NULL, &fifo_fops) == NULL) {
+#ifdef DYNAMIC
+ kfifo_free(&test);
+#endif
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void __exit example_exit(void)
+{
+ remove_proc_entry(PROC_FIFO, NULL);
+#ifdef DYNAMIC
+ kfifo_free(&test);
+#endif
+}
+
+module_init(example_init);
+module_exit(example_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stefani Seibold <stefani@seibold.net>");
--- /dev/null
+/*
+ * Sample dynamic sized record fifo implementation
+ *
+ * Copyright (C) 2010 Stefani Seibold <stefani@seibold.net>
+ *
+ * Released under the GPL version 2 only.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <linux/mutex.h>
+#include <linux/kfifo.h>
+
+/*
+ * This module shows how to create a variable sized record fifo.
+ */
+
+/* fifo size in elements (bytes) */
+#define FIFO_SIZE 128
+
+/* name of the proc entry */
+#define PROC_FIFO "record-fifo"
+
+/* lock for procfs read access */
+static DEFINE_MUTEX(read_lock);
+
+/* lock for procfs write access */
+static DEFINE_MUTEX(write_lock);
+
+/*
+ * define DYNAMIC in this example for a dynamically allocated fifo.
+ *
+ * Otherwise the fifo storage will be a part of the fifo structure.
+ */
+#if 0
+#define DYNAMIC
+#endif
+
+/*
+ * struct kfifo_rec_ptr_1 and STRUCT_KFIFO_REC_1 can handle records of a
+ * length between 0 and 255 bytes.
+ *
+ * struct kfifo_rec_ptr_2 and STRUCT_KFIFO_REC_2 can handle records of a
+ * length between 0 and 65535 bytes.
+ */
+
+#ifdef DYNAMIC
+struct kfifo_rec_ptr_1 test;
+
+#else
+typedef STRUCT_KFIFO_REC_1(FIFO_SIZE) mytest;
+
+static mytest test;
+#endif
+
+static int __init testfunc(void)
+{
+ char buf[100];
+ unsigned int i;
+ unsigned int ret;
+ struct { unsigned char buf[6]; } hello = { "hello" };
+
+ printk(KERN_INFO "record fifo test start\n");
+
+ kfifo_in(&test, &hello, sizeof(hello));
+
+ /* show the size of the next record in the fifo */
+ printk(KERN_INFO "fifo peek len: %u\n", kfifo_peek_len(&test));
+
+ /* put in variable length data */
+ for (i = 0; i < 10; i++) {
+ memset(buf, 'a' + i, i + 1);
+ kfifo_in(&test, buf, i + 1);
+ }
+
+ printk(KERN_INFO "fifo len: %u\n", kfifo_len(&test));
+
+ /* show the first record without removing from the fifo */
+ ret = kfifo_out_peek(&test, buf, sizeof(buf));
+ if (ret)
+ printk(KERN_INFO "%.*s\n", ret, buf);
+
+ /* print out all records in the fifo */
+ while (!kfifo_is_empty(&test)) {
+ ret = kfifo_out(&test, buf, sizeof(buf));
+ printk(KERN_INFO "%.*s\n", ret, buf);
+ }
+
+ return 0;
+}
+
+static ssize_t fifo_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int ret;
+ unsigned int copied;
+
+ if (mutex_lock_interruptible(&write_lock))
+ return -ERESTARTSYS;
+
+ ret = kfifo_from_user(&test, buf, count, &copied);
+
+ mutex_unlock(&write_lock);
+
+ return ret ? ret : copied;
+}
+
+static ssize_t fifo_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int ret;
+ unsigned int copied;
+
+ if (mutex_lock_interruptible(&read_lock))
+ return -ERESTARTSYS;
+
+ ret = kfifo_to_user(&test, buf, count, &copied);
+
+ mutex_unlock(&read_lock);
+
+ return ret ? ret : copied;
+}
+
+static const struct file_operations fifo_fops = {
+ .owner = THIS_MODULE,
+ .read = fifo_read,
+ .write = fifo_write,
+};
+
+static int __init example_init(void)
+{
+#ifdef DYNAMIC
+ int ret;
+
+ ret = kfifo_alloc(&test, FIFO_SIZE, GFP_KERNEL);
+ if (ret) {
+ printk(KERN_ERR "error kfifo_alloc\n");
+ return ret;
+ }
+#else
+ INIT_KFIFO(test);
+#endif
+ testfunc();
+
+ if (proc_create(PROC_FIFO, 0, NULL, &fifo_fops) == NULL) {
+#ifdef DYNAMIC
+ kfifo_free(&test);
+#endif
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void __exit example_exit(void)
+{
+ remove_proc_entry(PROC_FIFO, NULL);
+#ifdef DYNAMIC
+ kfifo_free(&test);
+#endif
+}
+
+module_init(example_init);
+module_exit(example_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stefani Seibold <stefani@seibold.net>");
#
# header-y - list files to be installed. They are preprocessed
# to remove __KERNEL__ section of the file
-# unifdef-y - Same as header-y. Obsolete
# objhdr-y - Same as header-y but for generated files
#
# ==========================================================================
install := $(INSTALL_HDR_PATH)/$(_dst)
-header-y := $(sort $(header-y) $(unifdef-y))
+header-y := $(sort $(header-y))
subdirs := $(patsubst %/,%,$(filter %/, $(header-y)))
header-y := $(filter-out %/, $(header-y))
check_stdin();
case oldaskconfig:
fflush(stdout);
- fgets(line, 128, stdin);
+ xfgets(line, 128, stdin);
return 1;
default:
break;
check_stdin();
case oldaskconfig:
fflush(stdout);
- fgets(line, 128, stdin);
+ xfgets(line, 128, stdin);
strip(line);
if (line[0] == '?') {
print_help(menu);
}
return 0;
}
+/*
+ * Helper function to facilitate fgets() by Jean Sacren.
+ */
+void xfgets(str, size, in)
+ char *str;
+ int size;
+ FILE *in;
+{
+ if (fgets(str, size, in) == NULL)
+ fprintf(stderr, "\nError in reading or end of file.\n");
+}
while (1) {
l = strcspn(str, "\"\\");
if (l) {
- fwrite(str, l, 1, out);
+ xfwrite(str, l, 1, out);
str += l;
}
if (!*str)
/*
* If symbol is a choice value and equals to the
* default for a choice - skip.
- * But only if value equal to "y".
+ * But only if value is bool and equal to "y" .
*/
if (sym_is_choice_value(sym)) {
struct symbol *cs;
cs = prop_get_symbol(sym_get_choice_prop(sym));
ds = sym_choice_default(cs);
if (sym == ds) {
- if ((sym->type == S_BOOLEAN ||
- sym->type == S_TRISTATE) &&
- sym_get_tristate_value(sym) == yes)
+ if ((sym->type == S_BOOLEAN) &&
+ sym_get_tristate_value(sym) == yes)
goto next_menu;
}
}
conf_changed_callback = fn;
}
+static void randomize_choice_values(struct symbol *csym)
+{
+ struct property *prop;
+ struct symbol *sym;
+ struct expr *e;
+ int cnt, def;
-void conf_set_all_new_symbols(enum conf_def_mode mode)
+ /*
+ * If choice is mod then we may have more items slected
+ * and if no then no-one.
+ * In both cases stop.
+ */
+ if (csym->curr.tri != yes)
+ return;
+
+ prop = sym_get_choice_prop(csym);
+
+ /* count entries in choice block */
+ cnt = 0;
+ expr_list_for_each_sym(prop->expr, e, sym)
+ cnt++;
+
+ /*
+ * find a random value and set it to yes,
+ * set the rest to no so we have only one set
+ */
+ def = (rand() % cnt);
+
+ cnt = 0;
+ expr_list_for_each_sym(prop->expr, e, sym) {
+ if (def == cnt++) {
+ sym->def[S_DEF_USER].tri = yes;
+ csym->def[S_DEF_USER].val = sym;
+ }
+ else {
+ sym->def[S_DEF_USER].tri = no;
+ }
+ }
+ csym->flags |= SYMBOL_DEF_USER;
+ /* clear VALID to get value calculated */
+ csym->flags &= ~(SYMBOL_VALID);
+}
+
+static void set_all_choice_values(struct symbol *csym)
{
- struct symbol *sym, *csym;
struct property *prop;
+ struct symbol *sym;
struct expr *e;
- int i, cnt, def;
+
+ prop = sym_get_choice_prop(csym);
+
+ /*
+ * Set all non-assinged choice values to no
+ */
+ expr_list_for_each_sym(prop->expr, e, sym) {
+ if (!sym_has_value(sym))
+ sym->def[S_DEF_USER].tri = no;
+ }
+ csym->flags |= SYMBOL_DEF_USER;
+ /* clear VALID to get value calculated */
+ csym->flags &= ~(SYMBOL_VALID);
+}
+
+void conf_set_all_new_symbols(enum conf_def_mode mode)
+{
+ struct symbol *sym, *csym;
+ int i, cnt;
for_all_symbols(i, sym) {
if (sym_has_value(sym))
sym_clear_all_valid();
- if (mode != def_random)
- return;
/*
* We have different type of choice blocks.
* If curr.tri equal to mod then we can select several
continue;
sym_calc_value(csym);
-
- if (csym->curr.tri != yes)
- continue;
-
- prop = sym_get_choice_prop(csym);
-
- /* count entries in choice block */
- cnt = 0;
- expr_list_for_each_sym(prop->expr, e, sym)
- cnt++;
-
- /*
- * find a random value and set it to yes,
- * set the rest to no so we have only one set
- */
- def = (rand() % cnt);
-
- cnt = 0;
- expr_list_for_each_sym(prop->expr, e, sym) {
- if (def == cnt++) {
- sym->def[S_DEF_USER].tri = yes;
- csym->def[S_DEF_USER].val = sym;
- }
- else {
- sym->def[S_DEF_USER].tri = no;
- }
- }
- csym->flags |= SYMBOL_DEF_USER;
- /* clear VALID to get value calculated */
- csym->flags &= ~(SYMBOL_VALID);
+ if (mode == def_random)
+ randomize_choice_values(csym);
+ else
+ set_all_choice_values(csym);
}
}
static void expr_print_file_helper(void *data, struct symbol *sym, const char *str)
{
- fwrite(str, strlen(str), 1, data);
+ xfwrite(str, strlen(str), 1, data);
}
void expr_fprint(struct expr *e, FILE *out)
int zconf_lineno(void);
char *zconf_curname(void);
+/* conf.c */
+void xfgets(char *str, int size, FILE *in);
+
/* confdata.c */
const char *conf_get_configname(void);
const char *conf_get_autoconfig_name(void);
void sym_add_change_count(int count);
void conf_set_all_new_symbols(enum conf_def_mode mode);
+/* confdata.c and expr.c */
+static inline void xfwrite(const void *str, size_t len, size_t count, FILE *out)
+{
+ if (fwrite(str, len, count, out) < count)
+ fprintf(stderr, "\nError in writing or end of file.\n");
+}
+
/* kconfig_load.c */
void kconfig_load(void);
struct mitem *mcur;
cur = current_item(curses_menu);
+ if (!cur)
+ return NULL;
mcur = (struct mitem *) item_userptr(cur);
return mcur->usrptr;
my $file = shift;
$x =~ s@/\*.*?\*/@@gos; # strip comments.
+ $x =~ s/^#\s*define\s+.*$//; # strip #define macros inside enums
+
if ($x =~ /enum\s+(\w+)\s*{(.*)}/) {
$declaration_name = $1;
my $members = $2;
#define _GNU_SOURCE
#include <stdio.h>
#include <ctype.h>
+#include <string.h>
#include "modpost.h"
#include "../../include/generated/autoconf.h"
#include "../../include/linux/license.h"
{
".comment*",
".debug*",
+ ".GCC-command-line", /* mn10300 */
".mdebug*", /* alpha, score, mips etc. */
".pdr", /* alpha, score, mips etc. */
".stab*",
* fromsec = .data*
* atsym =__param*
*
+ * Pattern 1a:
+ * module_param_call() ops can refer to __init set function if permissions=0
+ * The pattern is identified by:
+ * tosec = .init.text
+ * fromsec = .data*
+ * atsym = __param_ops_*
+ *
* Pattern 2:
* Many drivers utilise a *driver container with references to
* add, remove, probe functions etc.
(strncmp(fromsym, "__param", strlen("__param")) == 0))
return 0;
+ /* Check for pattern 1a */
+ if (strcmp(tosec, ".init.text") == 0 &&
+ match(fromsec, data_sections) &&
+ (strncmp(fromsym, "__param_ops_", strlen("__param_ops_")) == 0))
+ return 0;
+
/* Check for pattern 2 */
if (match(tosec, init_exit_sections) &&
match(fromsec, data_sections) &&
strcat(p, " ");
return r; /* we leak her but we do not care */
} else {
- return "";
+ return strdup("");
}
}
"%s%s so it may be used outside an exit section.\n",
from, prl_from, fromsym, from_p,
to, prl_to, tosym, to_p,
- sec2annotation(tosec), tosym, to_p);
+ prl_to, tosym, to_p);
free(prl_from);
free(prl_to);
break;
my $function_regex; # Find the name of a function
# (return offset and func name)
my $mcount_regex; # Find the call site to mcount (return offset)
+my $mcount_adjust; # Address adjustment to mcount offset
my $alignment; # The .align value to use for $mcount_section
my $section_type; # Section header plus possible alignment command
my $can_use_local = 0; # If we can use local function references
$function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:";
$mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount\$";
$section_type = '@progbits';
+$mcount_adjust = 0;
$type = ".long";
if ($arch eq "x86_64") {
} elsif ($arch eq "microblaze") {
# Microblaze calls '_mcount' instead of plain 'mcount'.
$mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
+} elsif ($arch eq "blackfin") {
+ $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s__mcount\$";
+ $mcount_adjust = -4;
} else {
die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
}
}
# is this a call site to mcount? If so, record it to print later
if ($text_found && /$mcount_regex/) {
- push(@offsets, hex $1);
+ push(@offsets, (hex $1) + $mcount_adjust);
}
}
# Check for mercurial and a mercurial repo.
if hgid=`hg id 2>/dev/null`; then
- tag=`printf '%s' "$hgid" | cut -d' ' -f2`
+ tag=`printf '%s' "$hgid" | cut -s -d' ' -f2`
# Do we have an untagged version?
if [ -z "$tag" -o "$tag" = tip ]; then
return error;
}
-static int apparmor_task_setrlimit(unsigned int resource,
- struct rlimit *new_rlim)
+static int apparmor_task_setrlimit(struct task_struct *task,
+ unsigned int resource, struct rlimit *new_rlim)
{
struct aa_profile *profile = aa_current_profile();
int error = 0;
* AppArmor sysfs module parameters
*/
-static int param_set_aabool(const char *val, struct kernel_param *kp);
-static int param_get_aabool(char *buffer, struct kernel_param *kp);
+static int param_set_aabool(const char *val, const struct kernel_param *kp);
+static int param_get_aabool(char *buffer, const struct kernel_param *kp);
#define param_check_aabool(name, p) __param_check(name, p, int)
+static struct kernel_param_ops param_ops_aabool = {
+ .set = param_set_aabool,
+ .get = param_get_aabool
+};
-static int param_set_aauint(const char *val, struct kernel_param *kp);
-static int param_get_aauint(char *buffer, struct kernel_param *kp);
+static int param_set_aauint(const char *val, const struct kernel_param *kp);
+static int param_get_aauint(char *buffer, const struct kernel_param *kp);
#define param_check_aauint(name, p) __param_check(name, p, int)
+static struct kernel_param_ops param_ops_aauint = {
+ .set = param_set_aauint,
+ .get = param_get_aauint
+};
-static int param_set_aalockpolicy(const char *val, struct kernel_param *kp);
-static int param_get_aalockpolicy(char *buffer, struct kernel_param *kp);
+static int param_set_aalockpolicy(const char *val, const struct kernel_param *kp);
+static int param_get_aalockpolicy(char *buffer, const struct kernel_param *kp);
#define param_check_aalockpolicy(name, p) __param_check(name, p, int)
+static struct kernel_param_ops param_ops_aalockpolicy = {
+ .set = param_set_aalockpolicy,
+ .get = param_get_aalockpolicy
+};
static int param_set_audit(const char *val, struct kernel_param *kp);
static int param_get_audit(char *buffer, struct kernel_param *kp);
__setup("apparmor=", apparmor_enabled_setup);
/* set global flag turning off the ability to load policy */
-static int param_set_aalockpolicy(const char *val, struct kernel_param *kp)
+static int param_set_aalockpolicy(const char *val, const struct kernel_param *kp)
{
if (!capable(CAP_MAC_ADMIN))
return -EPERM;
return param_set_bool(val, kp);
}
-static int param_get_aalockpolicy(char *buffer, struct kernel_param *kp)
+static int param_get_aalockpolicy(char *buffer, const struct kernel_param *kp)
{
if (!capable(CAP_MAC_ADMIN))
return -EPERM;
return param_get_bool(buffer, kp);
}
-static int param_set_aabool(const char *val, struct kernel_param *kp)
+static int param_set_aabool(const char *val, const struct kernel_param *kp)
{
if (!capable(CAP_MAC_ADMIN))
return -EPERM;
return param_set_bool(val, kp);
}
-static int param_get_aabool(char *buffer, struct kernel_param *kp)
+static int param_get_aabool(char *buffer, const struct kernel_param *kp)
{
if (!capable(CAP_MAC_ADMIN))
return -EPERM;
return param_get_bool(buffer, kp);
}
-static int param_set_aauint(const char *val, struct kernel_param *kp)
+static int param_set_aauint(const char *val, const struct kernel_param *kp)
{
if (!capable(CAP_MAC_ADMIN))
return -EPERM;
return param_set_uint(val, kp);
}
-static int param_get_aauint(char *buffer, struct kernel_param *kp)
+static int param_get_aauint(char *buffer, const struct kernel_param *kp)
{
if (!capable(CAP_MAC_ADMIN))
return -EPERM;
int deleted, connected;
int error = 0;
- /* Get the root we want to resolve too */
+ /* Get the root we want to resolve too, released below */
if (flags & PATH_CHROOT_REL) {
/* resolve paths relative to chroot */
- read_lock(¤t->fs->lock);
- root = current->fs->root;
- /* released below */
- path_get(&root);
- read_unlock(¤t->fs->lock);
+ get_fs_root(current->fs, &root);
} else {
/* resolve paths relative to namespace */
root.mnt = current->nsproxy->mnt_ns->root;
root.dentry = root.mnt->mnt_root;
- /* released below */
path_get(&root);
}
return 0;
}
-static int cap_task_setrlimit(unsigned int resource, struct rlimit *new_rlim)
+static int cap_task_setrlimit(struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim)
{
return 0;
}
*
* Warn if that happens, once per boot.
*/
-static void warn_setuid_and_fcaps_mixed(char *fname)
+static void warn_setuid_and_fcaps_mixed(const char *fname)
{
static int warned;
if (!warned) {
#include <linux/sched.h>
#include <linux/key-type.h>
-static inline __attribute__((format(printf, 1, 2)))
-void no_printk(const char *fmt, ...)
-{
-}
-
#ifdef __KDEBUG
#define kenter(FMT, ...) \
printk(KERN_DEBUG "==> %s("FMT")\n", __func__, ##__VA_ARGS__)
int security_file_permission(struct file *file, int mask)
{
- return security_ops->file_permission(file, mask);
+ int ret;
+
+ ret = security_ops->file_permission(file, mask);
+ if (ret)
+ return ret;
+
+ return fsnotify_perm(file, mask);
}
int security_file_alloc(struct file *file)
int security_dentry_open(struct file *file, const struct cred *cred)
{
- return security_ops->dentry_open(file, cred);
+ int ret;
+
+ ret = security_ops->dentry_open(file, cred);
+ if (ret)
+ return ret;
+
+ return fsnotify_perm(file, MAY_OPEN);
}
int security_task_create(unsigned long clone_flags)
return security_ops->task_getioprio(p);
}
-int security_task_setrlimit(unsigned int resource, struct rlimit *new_rlim)
+int security_task_setrlimit(struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim)
{
- return security_ops->task_setrlimit(resource, new_rlim);
+ return security_ops->task_setrlimit(p, resource, new_rlim);
}
int security_task_setscheduler(struct task_struct *p,
tty = get_current_tty();
if (tty) {
- file_list_lock();
+ spin_lock(&tty_files_lock);
if (!list_empty(&tty->tty_files)) {
+ struct tty_file_private *file_priv;
struct inode *inode;
/* Revalidate access to controlling tty.
than using file_has_perm, as this particular open
file may belong to another process and we are only
interested in the inode-based check here. */
- file = list_first_entry(&tty->tty_files, struct file, f_u.fu_list);
+ file_priv = list_first_entry(&tty->tty_files,
+ struct tty_file_private, list);
+ file = file_priv->file;
inode = file->f_path.dentry->d_inode;
if (inode_has_perm(cred, inode,
FILE__READ | FILE__WRITE, NULL)) {
drop_tty = 1;
}
}
- file_list_unlock();
+ spin_unlock(&tty_files_lock);
tty_kref_put(tty);
}
/* Reset controlling tty. */
rc = avc_has_perm(new_tsec->osid, new_tsec->sid, SECCLASS_PROCESS,
PROCESS__RLIMITINH, NULL);
if (rc) {
+ /* protect against do_prlimit() */
+ task_lock(current);
for (i = 0; i < RLIM_NLIMITS; i++) {
rlim = current->signal->rlim + i;
initrlim = init_task.signal->rlim + i;
rlim->rlim_cur = min(rlim->rlim_max, initrlim->rlim_cur);
}
- update_rlimit_cpu(current->signal->rlim[RLIMIT_CPU].rlim_cur);
+ task_unlock(current);
+ update_rlimit_cpu(current, rlimit(RLIMIT_CPU));
}
}
return current_has_perm(p, PROCESS__GETSCHED);
}
-static int selinux_task_setrlimit(unsigned int resource, struct rlimit *new_rlim)
+static int selinux_task_setrlimit(struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim)
{
- struct rlimit *old_rlim = current->signal->rlim + resource;
+ struct rlimit *old_rlim = p->signal->rlim + resource;
/* Control the ability to change the hard limit (whether
lowering or raising it), so that the hard limit can
later be used as a safe reset point for the soft limit
upon context transitions. See selinux_bprm_committing_creds. */
if (old_rlim->rlim_max != new_rlim->rlim_max)
- return current_has_perm(current, PROCESS__SETRLIMIT);
+ return current_has_perm(p, PROCESS__SETRLIMIT);
return 0;
}
static int soundbus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct soundbus_dev * soundbus_dev;
- struct of_device * of;
+ struct platform_device * of;
const char *compat;
int retval = 0;
int cplen, seen = 0;
struct list_head onbuslist;
/* the of device it represents */
- struct of_device ofdev;
+ struct platform_device ofdev;
/* what modules go by */
char modalias[32];
char *buf)
{
struct soundbus_dev *sdev = to_soundbus_device(dev);
- struct of_device *of = &sdev->ofdev;
+ struct platform_device *of = &sdev->ofdev;
int length;
if (*sdev->modalias) {
{
if (substream->runtime->trigger_master != substream)
return 0;
+ /* some drivers might use hw_ptr to recover from the pause -
+ update the hw_ptr now */
+ if (push)
+ snd_pcm_update_hw_ptr(substream);
/* The jiffies check in snd_pcm_update_hw_ptr*() is done by
* a delta betwen the current jiffies, this gives a large enough
* delta, effectively to skip the check once.
default:
if (get_user(val, (int __user *)arg))
- return -EFAULT;
+ return -EFAULT;
val = ad1848_mixer_set(devc, cmd & 0xff, val);
break;
}
#include <linux/poll.h>
#include <linux/bitops.h>
#include <linux/spinlock.h>
-#include <linux/smp_lock.h>
#include <linux/ac97_codec.h>
#include <linux/mutex.h>
#include <linux/linkage.h>
#include <linux/slab.h>
#include <linux/fs.h>
-#include <linux/smp_lock.h>
#include <linux/sound.h>
#include <linux/smp_lock.h>
#include <linux/soundcard.h>
static int max_buffer_size[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 128};
static int enable_ir[SNDRV_CARDS];
static uint subsystem[SNDRV_CARDS]; /* Force card subsystem model */
+static uint delay_pcm_irq[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 2};
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for the EMU10K1 soundcard.");
MODULE_PARM_DESC(enable_ir, "Enable IR.");
module_param_array(subsystem, uint, NULL, 0444);
MODULE_PARM_DESC(subsystem, "Force card subsystem model.");
+module_param_array(delay_pcm_irq, uint, NULL, 0444);
+MODULE_PARM_DESC(delay_pcm_irq, "Delay PCM interrupt by specified number of samples (default 0).");
/*
* Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value Model:SB0400
*/
&emu)) < 0)
goto error;
card->private_data = emu;
+ emu->delay_pcm_irq = delay_pcm_irq[dev] & 0x1f;
if ((err = snd_emu10k1_pcm(emu, 0, NULL)) < 0)
goto error;
if ((err = snd_emu10k1_pcm_mic(emu, 1, NULL)) < 0)
evoice->epcm->ccca_start_addr = start_addr + ccis;
if (extra) {
start_addr += ccis;
- end_addr += ccis;
+ end_addr += ccis + emu->delay_pcm_irq;
}
if (stereo && !extra) {
snd_emu10k1_ptr_write(emu, CPF, voice, CPF_STEREO_MASK);
/* Assumption that PT is already 0 so no harm overwriting */
snd_emu10k1_ptr_write(emu, PTRX, voice, (send_amount[0] << 8) | send_amount[1]);
snd_emu10k1_ptr_write(emu, DSL, voice, end_addr | (send_amount[3] << 24));
- snd_emu10k1_ptr_write(emu, PSST, voice, start_addr | (send_amount[2] << 24));
+ snd_emu10k1_ptr_write(emu, PSST, voice,
+ (start_addr + (extra ? emu->delay_pcm_irq : 0)) |
+ (send_amount[2] << 24));
if (emu->card_capabilities->emu_model)
pitch_target = PITCH_48000; /* Disable interpolators on emu1010 card */
else
snd_emu10k1_ptr_write(emu, IP, voice, 0);
}
+static inline void snd_emu10k1_playback_mangle_extra(struct snd_emu10k1 *emu,
+ struct snd_emu10k1_pcm *epcm,
+ struct snd_pcm_substream *substream,
+ struct snd_pcm_runtime *runtime)
+{
+ unsigned int ptr, period_pos;
+
+ /* try to sychronize the current position for the interrupt
+ source voice */
+ period_pos = runtime->status->hw_ptr - runtime->hw_ptr_interrupt;
+ period_pos %= runtime->period_size;
+ ptr = snd_emu10k1_ptr_read(emu, CCCA, epcm->extra->number);
+ ptr &= ~0x00ffffff;
+ ptr |= epcm->ccca_start_addr + period_pos;
+ snd_emu10k1_ptr_write(emu, CCCA, epcm->extra->number, ptr);
+}
+
static int snd_emu10k1_playback_trigger(struct snd_pcm_substream *substream,
int cmd)
{
/* follow thru */
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
case SNDRV_PCM_TRIGGER_RESUME:
+ if (cmd == SNDRV_PCM_TRIGGER_PAUSE_RELEASE)
+ snd_emu10k1_playback_mangle_extra(emu, epcm, substream, runtime);
mix = &emu->pcm_mixer[substream->number];
snd_emu10k1_playback_prepare_voice(emu, epcm->voices[0], 1, 0, mix);
snd_emu10k1_playback_prepare_voice(emu, epcm->voices[1], 0, 0, mix);
#endif
/*
printk(KERN_DEBUG
- "ptr = 0x%x, buffer_size = 0x%x, period_size = 0x%x\n",
- ptr, runtime->buffer_size, runtime->period_size);
+ "ptr = 0x%lx, buffer_size = 0x%lx, period_size = 0x%lx\n",
+ (long)ptr, (long)runtime->buffer_size,
+ (long)runtime->period_size);
*/
return ptr;
}
if (snd_BUG_ON(!hdr))
return NULL;
+ idx = runtime->period_size >= runtime->buffer_size ?
+ (emu->delay_pcm_irq * 2) : 0;
mutex_lock(&hdr->block_mutex);
- blk = search_empty(emu, runtime->dma_bytes);
+ blk = search_empty(emu, runtime->dma_bytes + idx);
if (blk == NULL) {
mutex_unlock(&hdr->block_mutex);
return NULL;
snd_array_free(&codec->init_pins);
}
+/*
+ * audio-converter setup caches
+ */
+struct hda_cvt_setup {
+ hda_nid_t nid;
+ u8 stream_tag;
+ u8 channel_id;
+ u16 format_id;
+ unsigned char active; /* cvt is currently used */
+ unsigned char dirty; /* setups should be cleared */
+};
+
+/* get or create a cache entry for the given audio converter NID */
+static struct hda_cvt_setup *
+get_hda_cvt_setup(struct hda_codec *codec, hda_nid_t nid)
+{
+ struct hda_cvt_setup *p;
+ int i;
+
+ for (i = 0; i < codec->cvt_setups.used; i++) {
+ p = snd_array_elem(&codec->cvt_setups, i);
+ if (p->nid == nid)
+ return p;
+ }
+ p = snd_array_new(&codec->cvt_setups);
+ if (p)
+ p->nid = nid;
+ return p;
+}
+
/*
* codec destructor
*/
codec->addr = codec_addr;
mutex_init(&codec->spdif_mutex);
mutex_init(&codec->control_mutex);
+ mutex_init(&codec->prepare_mutex);
init_hda_cache(&codec->amp_cache, sizeof(struct hda_amp_info));
init_hda_cache(&codec->cmd_cache, sizeof(struct hda_cache_head));
snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
+ snd_array_init(&codec->cvt_setups, sizeof(struct hda_cvt_setup), 8);
if (codec->bus->modelname) {
codec->modelname = kstrdup(codec->bus->modelname, GFP_KERNEL);
if (!codec->modelname) {
u32 stream_tag,
int channel_id, int format)
{
+ struct hda_cvt_setup *p;
+ unsigned int oldval, newval;
+ int i;
+
if (!nid)
return;
snd_printdd("hda_codec_setup_stream: "
"NID=0x%x, stream=0x%x, channel=%d, format=0x%x\n",
nid, stream_tag, channel_id, format);
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CHANNEL_STREAMID,
- (stream_tag << 4) | channel_id);
- msleep(1);
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_STREAM_FORMAT, format);
+ p = get_hda_cvt_setup(codec, nid);
+ if (!p)
+ return;
+ /* update the stream-id if changed */
+ if (p->stream_tag != stream_tag || p->channel_id != channel_id) {
+ oldval = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0);
+ newval = (stream_tag << 4) | channel_id;
+ if (oldval != newval)
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_CHANNEL_STREAMID,
+ newval);
+ p->stream_tag = stream_tag;
+ p->channel_id = channel_id;
+ }
+ /* update the format-id if changed */
+ if (p->format_id != format) {
+ oldval = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_STREAM_FORMAT, 0);
+ if (oldval != format) {
+ msleep(1);
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_STREAM_FORMAT,
+ format);
+ }
+ p->format_id = format;
+ }
+ p->active = 1;
+ p->dirty = 0;
+
+ /* make other inactive cvts with the same stream-tag dirty */
+ for (i = 0; i < codec->cvt_setups.used; i++) {
+ p = snd_array_elem(&codec->cvt_setups, i);
+ if (!p->active && p->stream_tag == stream_tag)
+ p->dirty = 1;
+ }
}
EXPORT_SYMBOL_HDA(snd_hda_codec_setup_stream);
+static void really_cleanup_stream(struct hda_codec *codec,
+ struct hda_cvt_setup *q);
+
/**
- * snd_hda_codec_cleanup_stream - clean up the codec for closing
+ * __snd_hda_codec_cleanup_stream - clean up the codec for closing
* @codec: the CODEC to clean up
* @nid: the NID to clean up
+ * @do_now: really clean up the stream instead of clearing the active flag
*/
-void snd_hda_codec_cleanup_stream(struct hda_codec *codec, hda_nid_t nid)
+void __snd_hda_codec_cleanup_stream(struct hda_codec *codec, hda_nid_t nid,
+ int do_now)
{
+ struct hda_cvt_setup *p;
+
if (!nid)
return;
snd_printdd("hda_codec_cleanup_stream: NID=0x%x\n", nid);
+ p = get_hda_cvt_setup(codec, nid);
+ if (p) {
+ /* here we just clear the active flag when do_now isn't set;
+ * actual clean-ups will be done later in
+ * purify_inactive_streams() called from snd_hda_codec_prpapre()
+ */
+ if (do_now)
+ really_cleanup_stream(codec, p);
+ else
+ p->active = 0;
+ }
+}
+EXPORT_SYMBOL_HDA(__snd_hda_codec_cleanup_stream);
+
+static void really_cleanup_stream(struct hda_codec *codec,
+ struct hda_cvt_setup *q)
+{
+ hda_nid_t nid = q->nid;
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CHANNEL_STREAMID, 0);
-#if 0 /* keep the format */
- msleep(1);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_STREAM_FORMAT, 0);
-#endif
+ memset(q, 0, sizeof(*q));
+ q->nid = nid;
+}
+
+/* clean up the all conflicting obsolete streams */
+static void purify_inactive_streams(struct hda_codec *codec)
+{
+ int i;
+
+ for (i = 0; i < codec->cvt_setups.used; i++) {
+ struct hda_cvt_setup *p = snd_array_elem(&codec->cvt_setups, i);
+ if (p->dirty)
+ really_cleanup_stream(codec, p);
+ }
+}
+
+/* clean up all streams; called from suspend */
+static void hda_cleanup_all_streams(struct hda_codec *codec)
+{
+ int i;
+
+ for (i = 0; i < codec->cvt_setups.used; i++) {
+ struct hda_cvt_setup *p = snd_array_elem(&codec->cvt_setups, i);
+ if (p->stream_tag)
+ really_cleanup_stream(codec, p);
+ }
}
-EXPORT_SYMBOL_HDA(snd_hda_codec_cleanup_stream);
/*
* amp access functions
{
if (codec->patch_ops.suspend)
codec->patch_ops.suspend(codec, PMSG_SUSPEND);
+ hda_cleanup_all_streams(codec);
hda_set_power_state(codec,
codec->afg ? codec->afg : codec->mfg,
AC_PWRST_D3);
return 0;
}
+/*
+ * codec prepare/cleanup entries
+ */
+int snd_hda_codec_prepare(struct hda_codec *codec,
+ struct hda_pcm_stream *hinfo,
+ unsigned int stream,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ int ret;
+ mutex_lock(&codec->prepare_mutex);
+ ret = hinfo->ops.prepare(hinfo, codec, stream, format, substream);
+ if (ret >= 0)
+ purify_inactive_streams(codec);
+ mutex_unlock(&codec->prepare_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_HDA(snd_hda_codec_prepare);
+
+void snd_hda_codec_cleanup(struct hda_codec *codec,
+ struct hda_pcm_stream *hinfo,
+ struct snd_pcm_substream *substream)
+{
+ mutex_lock(&codec->prepare_mutex);
+ hinfo->ops.cleanup(hinfo, codec, substream);
+ mutex_unlock(&codec->prepare_mutex);
+}
+EXPORT_SYMBOL_HDA(snd_hda_codec_cleanup);
+
/* global */
const char *snd_hda_pcm_type_name[HDA_PCM_NTYPES] = {
"Audio", "SPDIF", "HDMI", "Modem"
struct mutex spdif_mutex;
struct mutex control_mutex;
+ struct mutex prepare_mutex;
unsigned int spdif_status; /* IEC958 status bits */
unsigned short spdif_ctls; /* SPDIF control bits */
unsigned int spdif_in_enable; /* SPDIF input enable? */
hda_nid_t *slave_dig_outs; /* optional digital out slave widgets */
struct snd_array init_pins; /* initial (BIOS) pin configurations */
struct snd_array driver_pins; /* pin configs set by codec parser */
+ struct snd_array cvt_setups; /* audio convert setups */
#ifdef CONFIG_SND_HDA_HWDEP
struct snd_hwdep *hwdep; /* assigned hwdep device */
*/
int snd_hda_build_pcms(struct hda_bus *bus);
int snd_hda_codec_build_pcms(struct hda_codec *codec);
+
+int snd_hda_codec_prepare(struct hda_codec *codec,
+ struct hda_pcm_stream *hinfo,
+ unsigned int stream,
+ unsigned int format,
+ struct snd_pcm_substream *substream);
+void snd_hda_codec_cleanup(struct hda_codec *codec,
+ struct hda_pcm_stream *hinfo,
+ struct snd_pcm_substream *substream);
+
void snd_hda_codec_setup_stream(struct hda_codec *codec, hda_nid_t nid,
u32 stream_tag,
int channel_id, int format);
-void snd_hda_codec_cleanup_stream(struct hda_codec *codec, hda_nid_t nid);
+void __snd_hda_codec_cleanup_stream(struct hda_codec *codec, hda_nid_t nid,
+ int do_now);
+#define snd_hda_codec_cleanup_stream(codec, nid) \
+ __snd_hda_codec_cleanup_stream(codec, nid, 0)
unsigned int snd_hda_calc_stream_format(unsigned int rate,
unsigned int channels,
unsigned int format,
}
EXPORT_SYMBOL_HDA(snd_hda_eld_proc_free);
+/* update PCM info based on ELD */
+void hdmi_eld_update_pcm_info(struct hdmi_eld *eld, struct hda_pcm_stream *pcm,
+ struct hda_pcm_stream *codec_pars)
+{
+ int i;
+
+ pcm->rates = 0;
+ pcm->formats = 0;
+ pcm->maxbps = 0;
+ pcm->channels_min = -1;
+ pcm->channels_max = 0;
+ for (i = 0; i < eld->sad_count; i++) {
+ struct cea_sad *a = &eld->sad[i];
+ pcm->rates |= a->rates;
+ if (a->channels < pcm->channels_min)
+ pcm->channels_min = a->channels;
+ if (a->channels > pcm->channels_max)
+ pcm->channels_max = a->channels;
+ if (a->format == AUDIO_CODING_TYPE_LPCM) {
+ if (a->sample_bits & AC_SUPPCM_BITS_16) {
+ pcm->formats |= SNDRV_PCM_FMTBIT_S16_LE;
+ if (pcm->maxbps < 16)
+ pcm->maxbps = 16;
+ }
+ if (a->sample_bits & AC_SUPPCM_BITS_20) {
+ pcm->formats |= SNDRV_PCM_FMTBIT_S32_LE;
+ if (pcm->maxbps < 20)
+ pcm->maxbps = 20;
+ }
+ if (a->sample_bits & AC_SUPPCM_BITS_24) {
+ pcm->formats |= SNDRV_PCM_FMTBIT_S32_LE;
+ if (pcm->maxbps < 24)
+ pcm->maxbps = 24;
+ }
+ }
+ }
+
+ if (!codec_pars)
+ return;
+
+ /* restrict the parameters by the values the codec provides */
+ pcm->rates &= codec_pars->rates;
+ pcm->formats &= codec_pars->formats;
+ pcm->channels_min = max(pcm->channels_min, codec_pars->channels_min);
+ pcm->channels_max = min(pcm->channels_max, codec_pars->channels_max);
+ pcm->maxbps = min(pcm->maxbps, codec_pars->maxbps);
+}
+EXPORT_SYMBOL_HDA(hdmi_eld_update_pcm_info);
+
#endif /* CONFIG_PROC_FS */
azx_dev->period_bytes = 0;
azx_dev->format_val = 0;
- hinfo->ops.cleanup(hinfo, apcm->codec, substream);
+ snd_hda_codec_cleanup(apcm->codec, hinfo, substream);
return snd_pcm_lib_free_pages(substream);
}
else
azx_dev->fifo_size = 0;
- return hinfo->ops.prepare(hinfo, apcm->codec, azx_dev->stream_tag,
- azx_dev->format_val, substream);
+ return snd_hda_codec_prepare(apcm->codec, hinfo, azx_dev->stream_tag,
+ azx_dev->format_val, substream);
}
static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
int snd_hdmi_get_eld_size(struct hda_codec *codec, hda_nid_t nid);
int snd_hdmi_get_eld(struct hdmi_eld *, struct hda_codec *, hda_nid_t);
void snd_hdmi_show_eld(struct hdmi_eld *eld);
+void hdmi_eld_update_pcm_info(struct hdmi_eld *eld, struct hda_pcm_stream *pcm,
+ struct hda_pcm_stream *codec_pars);
#ifdef CONFIG_PROC_FS
int snd_hda_eld_proc_new(struct hda_codec *codec, struct hdmi_eld *eld,
return 0;
if (spec->cur_adc && spec->cur_adc != spec->adc_nid[idx]) {
/* stream is running, let's swap the current ADC */
- snd_hda_codec_cleanup_stream(codec, spec->cur_adc);
+ __snd_hda_codec_cleanup_stream(codec, spec->cur_adc, 1);
spec->cur_adc = spec->adc_nid[idx];
snd_hda_codec_setup_stream(codec, spec->cur_adc,
spec->cur_adc_stream_tag, 0,
new_adc = spec->adc_nids[spec->cur_adc_idx];
if (spec->cur_adc && spec->cur_adc != new_adc) {
/* stream is running, let's swap the current ADC */
- snd_hda_codec_cleanup_stream(codec, spec->cur_adc);
+ __snd_hda_codec_cleanup_stream(codec, spec->cur_adc, 1);
spec->cur_adc = new_adc;
snd_hda_codec_setup_stream(codec, new_adc,
spec->cur_adc_stream_tag, 0,
SND_PCI_QUIRK(0x1028, 0x02f5, "Dell",
CXT5066_DELL_LAPTOP),
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
+ SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTO),
SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTO),
SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
.patch = patch_cxt5066 },
{ .id = 0x14f15067, .name = "CX20583 (Pebble HSF)",
.patch = patch_cxt5066 },
+ { .id = 0x14f15068, .name = "CX20584",
+ .patch = patch_cxt5066 },
{ .id = 0x14f15069, .name = "CX20585",
.patch = patch_cxt5066 },
{} /* terminator */
MODULE_ALIAS("snd-hda-codec-id:14f15051");
MODULE_ALIAS("snd-hda-codec-id:14f15066");
MODULE_ALIAS("snd-hda-codec-id:14f15067");
+MODULE_ALIAS("snd-hda-codec-id:14f15068");
MODULE_ALIAS("snd-hda-codec-id:14f15069");
MODULE_LICENSE("GPL");
* export one pcm per pipe
*/
struct hda_pcm pcm_rec[MAX_HDMI_CVTS];
+ struct hda_pcm_stream codec_pcm_pars[MAX_HDMI_CVTS];
/*
* nvhdmi specific
return 0;
}
+/*
+ * HDA PCM callbacks
+ */
+static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct hdmi_spec *spec = codec->spec;
+ struct hdmi_eld *eld;
+ struct hda_pcm_stream *codec_pars;
+ unsigned int idx;
+
+ for (idx = 0; idx < spec->num_cvts; idx++)
+ if (hinfo->nid == spec->cvt[idx])
+ break;
+ if (snd_BUG_ON(idx >= spec->num_cvts) ||
+ snd_BUG_ON(idx >= spec->num_pins))
+ return -EINVAL;
+
+ /* save the PCM info the codec provides */
+ codec_pars = &spec->codec_pcm_pars[idx];
+ if (!codec_pars->rates)
+ *codec_pars = *hinfo;
+
+ eld = &spec->sink_eld[idx];
+ if (eld->sad_count > 0) {
+ hdmi_eld_update_pcm_info(eld, hinfo, codec_pars);
+ if (hinfo->channels_min > hinfo->channels_max ||
+ !hinfo->rates || !hinfo->formats)
+ return -ENODEV;
+ } else {
+ /* fallback to the codec default */
+ hinfo->channels_min = codec_pars->channels_min;
+ hinfo->channels_max = codec_pars->channels_max;
+ hinfo->rates = codec_pars->rates;
+ hinfo->formats = codec_pars->formats;
+ hinfo->maxbps = codec_pars->maxbps;
+ }
+ return 0;
+}
+
/*
* HDA/HDMI auto parsing
*/
.substreams = 1,
.channels_min = 2,
.ops = {
+ .open = hdmi_pcm_open,
.prepare = intel_hdmi_playback_pcm_prepare,
.cleanup = intel_hdmi_playback_pcm_cleanup,
},
static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch_89 = {
.substreams = 1,
.channels_min = 2,
- .rates = SUPPORTED_RATES,
- .maxbps = SUPPORTED_MAXBPS,
- .formats = SUPPORTED_FORMATS,
.ops = {
+ .open = hdmi_pcm_open,
.prepare = nvhdmi_dig_playback_pcm_prepare_8ch_89,
.cleanup = nvhdmi_playback_pcm_cleanup,
},
* patch entries
*/
static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
- { .id = 0x10de0002, .name = "MCP77/78 HDMI",
- .patch = patch_nvhdmi_8ch_7x },
- { .id = 0x10de0003, .name = "MCP77/78 HDMI",
- .patch = patch_nvhdmi_8ch_7x },
- { .id = 0x10de0005, .name = "MCP77/78 HDMI",
- .patch = patch_nvhdmi_8ch_7x },
- { .id = 0x10de0006, .name = "MCP77/78 HDMI",
- .patch = patch_nvhdmi_8ch_7x },
- { .id = 0x10de0007, .name = "MCP79/7A HDMI",
- .patch = patch_nvhdmi_8ch_7x },
- { .id = 0x10de000a, .name = "GT220 HDMI",
- .patch = patch_nvhdmi_8ch_89 },
- { .id = 0x10de000b, .name = "GT21x HDMI",
- .patch = patch_nvhdmi_8ch_89 },
- { .id = 0x10de000c, .name = "MCP89 HDMI",
- .patch = patch_nvhdmi_8ch_89 },
- { .id = 0x10de000d, .name = "GT240 HDMI",
- .patch = patch_nvhdmi_8ch_89 },
- { .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
- { .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
+ { .id = 0x10de0002, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x },
+ { .id = 0x10de0003, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x },
+ { .id = 0x10de0005, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x },
+ { .id = 0x10de0006, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x },
+ { .id = 0x10de0007, .name = "MCP79/7A HDMI", .patch = patch_nvhdmi_8ch_7x },
+ { .id = 0x10de000a, .name = "GPU 0a HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de000b, .name = "GPU 0b HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de000c, .name = "MCP89 HDMI", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de000d, .name = "GPU 0d HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0010, .name = "GPU 10 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0011, .name = "GPU 11 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0012, .name = "GPU 12 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0013, .name = "GPU 13 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0014, .name = "GPU 14 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0018, .name = "GPU 18 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0019, .name = "GPU 19 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de001a, .name = "GPU 1a HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de001b, .name = "GPU 1b HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de001c, .name = "GPU 1c HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0040, .name = "GPU 40 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0041, .name = "GPU 41 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0042, .name = "GPU 42 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0043, .name = "GPU 43 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0044, .name = "GPU 44 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+ { .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
+ { .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
{} /* terminator */
};
MODULE_ALIAS("snd-hda-codec-id:10de000b");
MODULE_ALIAS("snd-hda-codec-id:10de000c");
MODULE_ALIAS("snd-hda-codec-id:10de000d");
+MODULE_ALIAS("snd-hda-codec-id:10de0010");
+MODULE_ALIAS("snd-hda-codec-id:10de0011");
+MODULE_ALIAS("snd-hda-codec-id:10de0012");
+MODULE_ALIAS("snd-hda-codec-id:10de0013");
+MODULE_ALIAS("snd-hda-codec-id:10de0014");
+MODULE_ALIAS("snd-hda-codec-id:10de0018");
+MODULE_ALIAS("snd-hda-codec-id:10de0019");
+MODULE_ALIAS("snd-hda-codec-id:10de001a");
+MODULE_ALIAS("snd-hda-codec-id:10de001b");
+MODULE_ALIAS("snd-hda-codec-id:10de001c");
+MODULE_ALIAS("snd-hda-codec-id:10de0040");
+MODULE_ALIAS("snd-hda-codec-id:10de0041");
+MODULE_ALIAS("snd-hda-codec-id:10de0042");
+MODULE_ALIAS("snd-hda-codec-id:10de0043");
+MODULE_ALIAS("snd-hda-codec-id:10de0044");
MODULE_ALIAS("snd-hda-codec-id:10de0067");
MODULE_ALIAS("snd-hda-codec-id:10de8001");
ALC269VB_DMIC,
ALC269_FUJITSU,
ALC269_LIFEBOOK,
+ ALC271_ACER,
ALC269_AUTO,
ALC269_MODEL_LAST /* last tag */
};
new_adc = spec->adc_nids[spec->cur_adc_idx];
if (spec->cur_adc && spec->cur_adc != new_adc) {
/* stream is running, let's swap the current ADC */
- snd_hda_codec_cleanup_stream(codec, spec->cur_adc);
+ __snd_hda_codec_cleanup_stream(codec, spec->cur_adc, 1);
spec->cur_adc = new_adc;
snd_hda_codec_setup_stream(codec, new_adc,
spec->cur_adc_stream_tag, 0,
spec->stream_analog_playback = &alc260_pcm_analog_playback;
spec->stream_analog_capture = &alc260_pcm_analog_capture;
+ spec->stream_analog_alt_capture = &alc260_pcm_analog_capture;
spec->stream_digital_playback = &alc260_pcm_digital_playback;
spec->stream_digital_capture = &alc260_pcm_digital_capture;
SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
- SND_PCI_QUIRK(0x1854, 0x1775, "LG R510", ALC268_DELL),
{}
};
{ } /* end */
};
+static struct snd_kcontrol_new alc269_asus_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Master Playback Switch", 0x0c, 0x0, HDA_INPUT),
+ { } /* end */
+};
+
/* capture mixer elements */
static struct snd_kcontrol_new alc269_laptop_analog_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
{}
};
+static struct hda_verb alc271_acer_dmic_verbs[] = {
+ {0x20, AC_VERB_SET_COEF_INDEX, 0x0d},
+ {0x20, AC_VERB_SET_PROC_COEF, 0x4000},
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x21, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+ {0x22, AC_VERB_SET_CONNECT_SEL, 6},
+ { }
+};
+
/* toggle speaker-output according to the hp-jack state */
static void alc269_speaker_automute(struct hda_codec *codec)
{
static struct snd_pci_quirk alc269_cfg_tbl[] = {
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_QUANTA_FL1),
+ SND_PCI_QUIRK(0x1025, 0x047c, "ACER ZGA", ALC271_ACER),
SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
ALC269_AMIC),
SND_PCI_QUIRK(0x1043, 0x1013, "ASUS N61Da", ALC269VB_AMIC),
.unsol_event = alc269_lifebook_unsol_event,
.init_hook = alc269_lifebook_init_hook,
},
+ [ALC271_ACER] = {
+ .mixers = { alc269_asus_mixer },
+ .cap_mixer = alc269vb_laptop_digital_capture_mixer,
+ .init_verbs = { alc269_init_verbs, alc271_acer_dmic_verbs },
+ .num_dacs = ARRAY_SIZE(alc269_dac_nids),
+ .dac_nids = alc269_dac_nids,
+ .adc_nids = alc262_dmic_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc262_dmic_adc_nids),
+ .capsrc_nids = alc262_dmic_capsrc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc269_modes),
+ .channel_mode = alc269_modes,
+ .input_mux = &alc269_capture_source,
+ .dig_out_nid = ALC880_DIGOUT_NID,
+ .unsol_event = alc_sku_unsol_event,
+ .setup = alc269vb_laptop_dmic_setup,
+ .init_hook = alc_inithook,
+ },
};
static int patch_alc269(struct hda_codec *codec)
/*
* ALC680 support
*/
+#define ALC680_DIGIN_NID ALC880_DIGIN_NID
#define ALC680_DIGOUT_NID ALC880_DIGOUT_NID
#define alc680_modes alc260_modes
0x07, 0x08, 0x09
};
+/*
+ * Analog capture ADC cgange
+ */
+static int alc680_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct alc_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int pre_mic, pre_line;
+
+ pre_mic = snd_hda_jack_detect(codec, cfg->input_pins[AUTO_PIN_MIC]);
+ pre_line = snd_hda_jack_detect(codec, cfg->input_pins[AUTO_PIN_LINE]);
+
+ spec->cur_adc_stream_tag = stream_tag;
+ spec->cur_adc_format = format;
+
+ if (pre_mic || pre_line) {
+ if (pre_mic)
+ snd_hda_codec_setup_stream(codec, 0x08, stream_tag, 0,
+ format);
+ else
+ snd_hda_codec_setup_stream(codec, 0x09, stream_tag, 0,
+ format);
+ } else
+ snd_hda_codec_setup_stream(codec, 0x07, stream_tag, 0, format);
+ return 0;
+}
+
+static int alc680_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ snd_hda_codec_cleanup_stream(codec, 0x07);
+ snd_hda_codec_cleanup_stream(codec, 0x08);
+ snd_hda_codec_cleanup_stream(codec, 0x09);
+ return 0;
+}
+
+static struct hda_pcm_stream alc680_pcm_analog_auto_capture = {
+ .substreams = 1, /* can be overridden */
+ .channels_min = 2,
+ .channels_max = 2,
+ /* NID is set in alc_build_pcms */
+ .ops = {
+ .prepare = alc680_capture_pcm_prepare,
+ .cleanup = alc680_capture_pcm_cleanup
+ },
+};
+
static struct snd_kcontrol_new alc680_base_mixer[] = {
/* output mixer control */
HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x4, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x16, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Int Mic Boost", 0x12, 0, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line In Boost", 0x19, 0, HDA_INPUT),
{ }
};
-static struct snd_kcontrol_new alc680_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
+static struct hda_bind_ctls alc680_bind_cap_vol = {
+ .ops = &snd_hda_bind_vol,
+ .values = {
+ HDA_COMPOSE_AMP_VAL(0x07, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x08, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_INPUT),
+ 0
+ },
+};
+
+static struct hda_bind_ctls alc680_bind_cap_switch = {
+ .ops = &snd_hda_bind_sw,
+ .values = {
+ HDA_COMPOSE_AMP_VAL(0x07, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x08, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_INPUT),
+ 0
+ },
+};
+
+static struct snd_kcontrol_new alc680_master_capture_mixer[] = {
+ HDA_BIND_VOL("Capture Volume", &alc680_bind_cap_vol),
+ HDA_BIND_SW("Capture Switch", &alc680_bind_cap_switch),
{ } /* end */
};
* generic initialization of ADC, input mixers and output mixers
*/
static struct hda_verb alc680_init_verbs[] = {
- /* Unmute DAC0-1 and set vol = 0 */
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+ {0x16, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_MIC_EVENT | AC_USRSP_EN},
+
{ }
};
+/* toggle speaker-output according to the hp-jack state */
+static void alc680_base_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ spec->autocfg.hp_pins[0] = 0x16;
+ spec->autocfg.speaker_pins[0] = 0x14;
+ spec->autocfg.speaker_pins[1] = 0x15;
+ spec->autocfg.input_pins[AUTO_PIN_MIC] = 0x18;
+ spec->autocfg.input_pins[AUTO_PIN_LINE] = 0x19;
+}
+
+static void alc680_rec_autoswitch(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int present;
+ hda_nid_t new_adc;
+
+ present = snd_hda_jack_detect(codec, cfg->input_pins[AUTO_PIN_MIC]);
+
+ new_adc = present ? 0x8 : 0x7;
+ __snd_hda_codec_cleanup_stream(codec, !present ? 0x8 : 0x7, 1);
+ snd_hda_codec_setup_stream(codec, new_adc,
+ spec->cur_adc_stream_tag, 0,
+ spec->cur_adc_format);
+
+}
+
+static void alc680_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ if ((res >> 26) == ALC880_HP_EVENT)
+ alc_automute_amp(codec);
+ if ((res >> 26) == ALC880_MIC_EVENT)
+ alc680_rec_autoswitch(codec);
+}
+
+static void alc680_inithook(struct hda_codec *codec)
+{
+ alc_automute_amp(codec);
+ alc680_rec_autoswitch(codec);
+}
+
/* create input playback/capture controls for the given pin */
static int alc680_new_analog_output(struct alc_spec *spec, hda_nid_t nid,
const char *ctlname, int idx)
#define alc680_pcm_analog_capture alc880_pcm_analog_capture
#define alc680_pcm_analog_alt_capture alc880_pcm_analog_alt_capture
#define alc680_pcm_digital_playback alc880_pcm_digital_playback
-
-static struct hda_input_mux alc680_capture_source = {
- .num_items = 1,
- .items = {
- { "Mic", 0x0 },
- },
-};
+#define alc680_pcm_digital_capture alc880_pcm_digital_capture
/*
* BIOS auto configuration
alc680_ignore);
if (err < 0)
return err;
+
if (!spec->autocfg.line_outs) {
if (spec->autocfg.dig_outs || spec->autocfg.dig_in_pin) {
spec->multiout.max_channels = 2;
add_mixer(spec, spec->kctls.list);
add_verb(spec, alc680_init_verbs);
- spec->num_mux_defs = 1;
- spec->input_mux = &alc680_capture_source;
err = alc_auto_add_mic_boost(codec);
if (err < 0)
static struct alc_config_preset alc680_presets[] = {
[ALC680_BASE] = {
.mixers = { alc680_base_mixer },
- .cap_mixer = alc680_capture_mixer,
+ .cap_mixer = alc680_master_capture_mixer,
.init_verbs = { alc680_init_verbs },
.num_dacs = ARRAY_SIZE(alc680_dac_nids),
.dac_nids = alc680_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc680_adc_nids),
- .adc_nids = alc680_adc_nids,
- .hp_nid = 0x04,
.dig_out_nid = ALC680_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc680_modes),
.channel_mode = alc680_modes,
- .input_mux = &alc680_capture_source,
+ .unsol_event = alc680_unsol_event,
+ .setup = alc680_base_setup,
+ .init_hook = alc680_inithook,
+
},
};
setup_preset(codec, &alc680_presets[board_config]);
spec->stream_analog_playback = &alc680_pcm_analog_playback;
- spec->stream_analog_capture = &alc680_pcm_analog_capture;
- spec->stream_analog_alt_capture = &alc680_pcm_analog_alt_capture;
+ spec->stream_analog_capture = &alc680_pcm_analog_auto_capture;
spec->stream_digital_playback = &alc680_pcm_digital_playback;
+ spec->stream_digital_capture = &alc680_pcm_digital_capture;
if (!spec->adc_nids) {
spec->adc_nids = alc680_adc_nids;
STAC_92HD83XXX_PWR_REF,
STAC_DELL_S14,
STAC_92HD83XXX_HP,
+ STAC_HP_DV7_4000,
STAC_92HD83XXX_MODELS
};
0x40f000f0, 0x40f000f0,
};
+static unsigned int hp_dv7_4000_pin_configs[10] = {
+ 0x03a12050, 0x0321201f, 0x40f000f0, 0x90170110,
+ 0x40f000f0, 0x40f000f0, 0x90170110, 0xd5a30140,
+ 0x40f000f0, 0x40f000f0,
+};
+
static unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = {
[STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs,
[STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs,
[STAC_DELL_S14] = dell_s14_pin_configs,
+ [STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs,
};
static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = {
[STAC_92HD83XXX_PWR_REF] = "mic-ref",
[STAC_DELL_S14] = "dell-s14",
[STAC_92HD83XXX_HP] = "hp",
+ [STAC_HP_DV7_4000] = "hp-dv7-4000",
};
static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
case 0x111d7667:
case 0x111d7668:
case 0x111d7669:
+ case 0x111d76d1:
+ case 0x111d76d9:
spec->num_pins = ARRAY_SIZE(stac92hd88xxx_pin_nids);
spec->pin_nids = stac92hd88xxx_pin_nids;
spec->mono_nid = 0;
{ .id = 0x111d76d4, .name = "92HD83C1C5", .patch = patch_stac92hd83xxx},
{ .id = 0x111d7605, .name = "92HD81B1X5", .patch = patch_stac92hd83xxx},
{ .id = 0x111d76d5, .name = "92HD81B1C5", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76d1, .name = "92HD87B1/3", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76d9, .name = "92HD87B2/4", .patch = patch_stac92hd83xxx},
{ .id = 0x111d7666, .name = "92HD88B3", .patch = patch_stac92hd83xxx},
{ .id = 0x111d7667, .name = "92HD88B1", .patch = patch_stac92hd83xxx},
{ .id = 0x111d7668, .name = "92HD88B2", .patch = patch_stac92hd83xxx},
firmware.firmware.ASIC, firmware.firmware.CODEC,
firmware.firmware.AUXDSP, firmware.firmware.PROG);
+ if (!chip)
+ return 1;
+
for (i = 0; i < FIRMWARE_VERSIONS; i++) {
if (!memcmp(&firmware_versions[i], &firmware, sizeof(firmware)))
- break;
- }
- if (i >= FIRMWARE_VERSIONS)
- return 0; /* no match */
+ return 1; /* OK */
- if (!chip)
- return 1; /* OK */
+ }
snd_printdd("Writing Firmware\n");
if (!chip->fw_entry) {
Set the correct GPIO for RESET the sound chip.
config SND_BF5XX_SOC_AD1980
- tristate "SoC AD1980/1 Audio support for BF5xx"
+ tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)"
depends on SND_BF5XX_AC97
select SND_BF5XX_SOC_AC97
select SND_SOC_AD1980
help
Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+ Warning:
+ Because Analog Devices Inc. discontinued the ad1980 sound chip since
+ Sep. 2009, this ad1980 driver is not maintained, tested and supported
+ by ADI now.
+
config SND_BF5XX_SOC_SPORT
tristate
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+/*
+ * WARNING:
+ *
+ * Because Analog Devices Inc. discontinued the ad1980 sound chip since
+ * Sep. 2009, this ad1980 driver is not maintained, tested and supported
+ * by ADI now.
+ */
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
/* Module information */
MODULE_AUTHOR("Cliff Cai");
-MODULE_DESCRIPTION("ALSA SoC AD1980/1 BF5xx board");
+MODULE_DESCRIPTION("ALSA SoC AD1980/1 BF5xx board (Obsolete)");
MODULE_LICENSE("GPL");
* option) any later version.
*/
+/*
+ * WARNING:
+ *
+ * Because Analog Devices Inc. discontinued the ad1980 sound chip since
+ * Sep. 2009, this ad1980 driver is not maintained, tested and supported
+ * by ADI now.
+ */
+
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
};
EXPORT_SYMBOL_GPL(soc_codec_dev_ad1980);
-MODULE_DESCRIPTION("ASoC ad1980 driver");
+MODULE_DESCRIPTION("ASoC ad1980 driver (Obsolete)");
MODULE_AUTHOR("Roy Huang, Cliff Cai");
MODULE_LICENSE("GPL");
/*
* ad1980.h -- ad1980 Soc Audio driver
+ *
+ * WARNING:
+ *
+ * Because Analog Devices Inc. discontinued the ad1980 sound chip since
+ * Sep. 2009, this ad1980 driver is not maintained, tested and supported
+ * by ADI now.
*/
#ifndef _AD1980_H
SOC_DOUBLE("DAC3 Invert Switch", WM8580_DAC_CONTROL4, 4, 5, 1, 0),
SOC_SINGLE("DAC ZC Switch", WM8580_DAC_CONTROL5, 5, 1, 0),
-SOC_SINGLE("DAC1 Switch", WM8580_DAC_CONTROL5, 0, 1, 0),
-SOC_SINGLE("DAC2 Switch", WM8580_DAC_CONTROL5, 1, 1, 0),
-SOC_SINGLE("DAC3 Switch", WM8580_DAC_CONTROL5, 2, 1, 0),
+SOC_SINGLE("DAC1 Switch", WM8580_DAC_CONTROL5, 0, 1, 1),
+SOC_SINGLE("DAC2 Switch", WM8580_DAC_CONTROL5, 1, 1, 1),
+SOC_SINGLE("DAC3 Switch", WM8580_DAC_CONTROL5, 2, 1, 1),
SOC_DOUBLE("ADC Mute Switch", WM8580_ADC_CONTROL1, 0, 1, 1, 0),
SOC_SINGLE("ADC High-Pass Filter Switch", WM8580_ADC_CONTROL1, 4, 1, 0),
case SND_SOC_DAIFMT_LEFT_J:
iface |= 0x0001;
break;
- /* FIXME: CHECK A/B */
- case SND_SOC_DAIFMT_DSP_A:
- iface |= 0x0003;
- break;
- case SND_SOC_DAIFMT_DSP_B:
- iface |= 0x0007;
- break;
default:
return -EINVAL;
}
struct wm8994_micdet micdet[2];
+ int revision;
struct wm8994_pdata *pdata;
};
static int wm8994_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
+ struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
- /* Tweak DC servo configuration for improved
- * performance. */
- snd_soc_write(codec, 0x102, 0x3);
- snd_soc_write(codec, 0x56, 0x3);
- snd_soc_write(codec, 0x102, 0);
+ /* Tweak DC servo and DSP configuration for
+ * improved performance. */
+ if (wm8994->revision < 4) {
+ /* Tweak DC servo and DSP configuration for
+ * improved performance. */
+ snd_soc_write(codec, 0x102, 0x3);
+ snd_soc_write(codec, 0x56, 0x3);
+ snd_soc_write(codec, 0x817, 0);
+ snd_soc_write(codec, 0x102, 0);
+ }
/* Discharge LINEOUT1 & 2 */
snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
struct wm8994_priv *wm8994;
struct snd_soc_codec *codec;
int i;
- u16 rev;
if (wm8994_codec) {
dev_err(&pdev->dev, "Another WM8994 is registered\n");
wm8994->reg_cache[i] = 0;
/* Set revision-specific configuration */
- rev = snd_soc_read(codec, WM8994_CHIP_REVISION);
- switch (rev) {
+ wm8994->revision = snd_soc_read(codec, WM8994_CHIP_REVISION);
+ switch (wm8994->revision) {
case 2:
case 3:
wm8994->hubs.dcs_codes = -5;
};
EXPORT_SYMBOL_GPL(mpc5200_audio_dma_platform);
-int mpc5200_audio_dma_create(struct of_device *op)
+int mpc5200_audio_dma_create(struct platform_device *op)
{
phys_addr_t fifo;
struct psc_dma *psc_dma;
}
EXPORT_SYMBOL_GPL(mpc5200_audio_dma_create);
-int mpc5200_audio_dma_destroy(struct of_device *op)
+int mpc5200_audio_dma_destroy(struct platform_device *op)
{
struct psc_dma *psc_dma = dev_get_drvdata(&op->dev);
return &psc_dma->playback;
}
-int mpc5200_audio_dma_create(struct of_device *op);
-int mpc5200_audio_dma_destroy(struct of_device *op);
+int mpc5200_audio_dma_create(struct platform_device *op);
+int mpc5200_audio_dma_destroy(struct platform_device *op);
extern struct snd_soc_platform mpc5200_audio_dma_platform;
* - Probe/remove operations
* - OF device match table
*/
-static int __devinit psc_ac97_of_probe(struct of_device *op,
+static int __devinit psc_ac97_of_probe(struct platform_device *op,
const struct of_device_id *match)
{
int rc, i;
return 0;
}
-static int __devexit psc_ac97_of_remove(struct of_device *op)
+static int __devexit psc_ac97_of_remove(struct platform_device *op)
{
return mpc5200_audio_dma_destroy(op);
}
* - Probe/remove operations
* - OF device match table
*/
-static int __devinit psc_i2s_of_probe(struct of_device *op,
+static int __devinit psc_i2s_of_probe(struct platform_device *op,
const struct of_device_id *match)
{
int rc;
}
-static int __devexit psc_i2s_of_remove(struct of_device *op)
+static int __devexit psc_i2s_of_remove(struct platform_device *op)
{
return mpc5200_audio_dma_destroy(op);
}
* SSI devices. We also probably aren't compatible with the generic Elo DMA
* device driver.
*/
-static int mpc8610_hpcd_probe(struct of_device *ofdev,
+static int mpc8610_hpcd_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
*
* This function is called when the OF device is removed.
*/
-static int mpc8610_hpcd_remove(struct of_device *ofdev)
+static int mpc8610_hpcd_remove(struct platform_device *ofdev)
{
struct platform_device *sound_device = dev_get_drvdata(&ofdev->dev);
struct mpc8610_hpcd_data *machine_data =
config SND_SOC_EUKREA_TLV320
tristate "Eukrea TLV320"
- depends on MACH_EUKREA_MBIMX27_BASEBOARD || MACH_EUKREA_MBIMXSD_BASEBOARD
+ depends on MACH_EUKREA_MBIMX27_BASEBOARD \
+ || MACH_EUKREA_MBIMXSD25_BASEBOARD \
+ || MACH_EUKREA_MBIMXSD35_BASEBOARD
select SND_SOC_TLV320AIC23
help
Enable I2S based access to the TLV320AIC23B codec attached
static unsigned int snd_soc_16_8_read(struct snd_soc_codec *codec,
unsigned int reg)
{
- u16 *cache = codec->reg_cache;
+ u8 *cache = codec->reg_cache;
reg &= 0xff;
if (reg >= codec->reg_cache_size)
static int snd_soc_16_8_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
- u16 *cache = codec->reg_cache;
+ u8 *cache = codec->reg_cache;
u8 data[3];
int ret;
int pgain;
int mgain;
- struct of_device *op;
+ struct platform_device *op;
unsigned int irq;
struct snd_amd7930 *next;
};
static int snd_amd7930_free(struct snd_amd7930 *amd)
{
- struct of_device *op = amd->op;
+ struct platform_device *op = amd->op;
amd7930_idle(amd);
};
static int __devinit snd_amd7930_create(struct snd_card *card,
- struct of_device *op,
+ struct platform_device *op,
int irq, int dev,
struct snd_amd7930 **ramd)
{
return 0;
}
-static int __devinit amd7930_sbus_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit amd7930_sbus_probe(struct platform_device *op, const struct of_device_id *match)
{
struct resource *rp = &op->resource[0];
static int dev_num;
struct mutex mce_mutex; /* mutex for mce register */
struct mutex open_mutex; /* mutex for ALSA open/close */
- struct of_device *op;
+ struct platform_device *op;
unsigned int irq[2];
unsigned int regs_size;
struct snd_cs4231 *next;
static int snd_cs4231_sbus_free(struct snd_cs4231 *chip)
{
- struct of_device *op = chip->op;
+ struct platform_device *op = chip->op;
if (chip->irq[0])
free_irq(chip->irq[0], chip);
};
static int __devinit snd_cs4231_sbus_create(struct snd_card *card,
- struct of_device *op,
+ struct platform_device *op,
int dev)
{
struct snd_cs4231 *chip = card->private_data;
return 0;
}
-static int __devinit cs4231_sbus_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit cs4231_sbus_probe(struct platform_device *op, const struct of_device_id *match)
{
struct resource *rp = &op->resource[0];
struct snd_card *card;
static int snd_cs4231_ebus_free(struct snd_cs4231 *chip)
{
- struct of_device *op = chip->op;
+ struct platform_device *op = chip->op;
if (chip->c_dma.ebus_info.regs) {
ebus_dma_unregister(&chip->c_dma.ebus_info);
};
static int __devinit snd_cs4231_ebus_create(struct snd_card *card,
- struct of_device *op,
+ struct platform_device *op,
int dev)
{
struct snd_cs4231 *chip = card->private_data;
return 0;
}
-static int __devinit cs4231_ebus_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit cs4231_ebus_probe(struct platform_device *op, const struct of_device_id *match)
{
struct snd_card *card;
int err;
}
#endif
-static int __devinit cs4231_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit cs4231_probe(struct platform_device *op, const struct of_device_id *match)
{
#ifdef EBUS_SUPPORT
if (!strcmp(op->dev.of_node->parent->name, "ebus"))
return -ENODEV;
}
-static int __devexit cs4231_remove(struct of_device *op)
+static int __devexit cs4231_remove(struct platform_device *op)
{
struct snd_cs4231 *chip = dev_get_drvdata(&op->dev);
/* This structure holds the information for both chips (DBRI & CS4215) */
struct snd_dbri {
int regs_size, irq; /* Needed for unload */
- struct of_device *op; /* OF device info */
+ struct platform_device *op; /* OF device info */
spinlock_t lock;
struct dbri_dma *dma; /* Pointer to our DMA block */
static void snd_dbri_free(struct snd_dbri *dbri);
static int __devinit snd_dbri_create(struct snd_card *card,
- struct of_device *op,
+ struct platform_device *op,
int irq, int dev)
{
struct snd_dbri *dbri = card->private_data;
(void *)dbri->dma, dbri->dma_dvma);
}
-static int __devinit dbri_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit dbri_probe(struct platform_device *op, const struct of_device_id *match)
{
struct snd_dbri *dbri;
struct resource *rp;
return err;
}
-static int __devexit dbri_remove(struct of_device *op)
+static int __devexit dbri_remove(struct platform_device *op)
{
struct snd_card *card = dev_get_drvdata(&op->dev);
/* fp->channels is already set in this case */
ret = parse_audio_format_rates_v2(chip, fp);
break;
+ default:
+ snd_printk(KERN_ERR "%d:%u:%d : invalid protocol version %d\n",
+ chip->dev->devnum, fp->iface, fp->altsetting, protocol);
+ return -EINVAL;
}
if (fp->channels < 1) {
ret = parse_audio_format_rates_v2(chip, fp);
break;
}
+ default:
+ snd_printk(KERN_ERR "%d:%u:%d : invalid protocol version %d\n",
+ chip->dev->devnum, fp->iface, fp->altsetting, protocol);
+ return -EINVAL;
}
return ret;
#
# Define NO_DWARF if you do not want debug-info analysis feature at all.
-$(shell sh -c 'mkdir -p $(OUTPUT)scripts/python/Perf-Trace-Util/' 2> /dev/null)
-$(shell sh -c 'mkdir -p $(OUTPUT)scripts/perl/Perf-Trace-Util/' 2> /dev/null)
-$(shell sh -c 'mkdir -p $(OUTPUT)util/scripting-engines/' 2> /dev/null)
-$(shell sh -c 'mkdir $(OUTPUT)bench' 2> /dev/null)
-
$(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
@$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
-include $(OUTPUT)PERF-VERSION-FILE
ARCH := x86
endif
-$(shell sh -c 'mkdir -p $(OUTPUT)arch/$(ARCH)/util/' 2> /dev/null)
-
# CFLAGS and LDFLAGS are for the users to override from the command line.
#
CC = $(CROSS_COMPILE)gcc
AR = $(CROSS_COMPILE)ar
RM = rm -f
+MKDIR = mkdir
TAR = tar
FIND = find
INSTALL = install
# Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
BASIC_CFLAGS += -I/usr/include/slang
EXTLIBS += -lnewt -lslang
- LIB_OBJS += $(OUTPUT)util/newt.o
+ LIB_OBJS += $(OUTPUT)util/ui/setup.o
+ LIB_OBJS += $(OUTPUT)util/ui/browser.o
+ LIB_OBJS += $(OUTPUT)util/ui/browsers/annotate.o
+ LIB_OBJS += $(OUTPUT)util/ui/browsers/hists.o
+ LIB_OBJS += $(OUTPUT)util/ui/browsers/map.o
+ LIB_OBJS += $(OUTPUT)util/ui/helpline.o
+ LIB_OBJS += $(OUTPUT)util/ui/progress.o
+ LIB_OBJS += $(OUTPUT)util/ui/util.o
+ LIB_H += util/ui/browser.h
+ LIB_H += util/ui/browsers/map.h
+ LIB_H += util/ui/helpline.h
+ LIB_H += util/ui/libslang.h
+ LIB_H += util/ui/progress.h
+ LIB_H += util/ui/util.h
endif
endif
QUIET_CC = @echo ' ' CC $@;
QUIET_AR = @echo ' ' AR $@;
QUIET_LINK = @echo ' ' LINK $@;
+ QUIET_MKDIR = @echo ' ' MKDIR $@;
QUIET_BUILT_IN = @echo ' ' BUILTIN $@;
QUIET_GEN = @echo ' ' GEN $@;
QUIET_SUBDIR0 = +@subdir=
$(OUTPUT)util/config.o: util/config.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
-$(OUTPUT)util/newt.o: util/newt.c $(OUTPUT)PERF-CFLAGS
+$(OUTPUT)util/ui/browser.o: util/ui/browser.c $(OUTPUT)PERF-CFLAGS
+ $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
+
+$(OUTPUT)util/ui/browsers/annotate.o: util/ui/browsers/annotate.c $(OUTPUT)PERF-CFLAGS
+ $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
+
+$(OUTPUT)util/ui/browsers/hists.o: util/ui/browsers/hists.c $(OUTPUT)PERF-CFLAGS
+ $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
+
+$(OUTPUT)util/ui/browsers/map.o: util/ui/browsers/map.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
$(OUTPUT)util/rbtree.o: ../../lib/rbtree.c $(OUTPUT)PERF-CFLAGS
$(patsubst perf-%$X,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
builtin-revert.o wt-status.o: wt-status.h
+# we compile into subdirectories. if the target directory is not the source directory, they might not exists. So
+# we depend the various files onto their directories.
+DIRECTORY_DEPS = $(LIB_OBJS) $(BUILTIN_OBJS) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h
+$(DIRECTORY_DEPS): $(sort $(dir $(DIRECTORY_DEPS)))
+# In the second step, we make a rule to actually create these directories
+$(sort $(dir $(DIRECTORY_DEPS))):
+ $(QUIET_MKDIR)$(MKDIR) -p $@ 2>/dev/null
+
$(LIB_FILE): $(LIB_OBJS)
$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS)
LIST_HEAD(head);
struct objdump_line *pos, *n;
- if (hist_entry__annotate(he, &head) < 0)
+ if (hist_entry__annotate(he, &head, 0) < 0)
return -1;
if (full_paths)
hists__tty_browse_tree(&session->hists_tree, help);
out_delete:
- perf_session__delete(session);
+ /*
+ * Speed up the exit process, for large files this can
+ * take quite a while.
+ *
+ * XXX Enable this when using valgrind or if we ever
+ * librarize this command.
+ *
+ * Also experiment with obstacks to see how much speed
+ * up we'll get here.
+ *
+ * perf_session__delete(session);
+ */
return ret;
}
* so don't allocate extra space that won't be used in the stdio
* implementation.
*/
- if (use_browser > 0)
+ if (use_browser > 0) {
symbol_conf.priv_size = sizeof(struct sym_priv);
+ /*
+ * For searching by name on the "Browse map details".
+ * providing it only in verbose mode not to bloat too
+ * much struct symbol.
+ */
+ if (verbose) {
+ /*
+ * XXX: Need to provide a less kludgy way to ask for
+ * more space per symbol, the u32 is for the index on
+ * the ui browser.
+ * See symbol__browser_index.
+ */
+ symbol_conf.priv_size += sizeof(u32);
+ symbol_conf.sort_by_name = true;
+ }
+ }
if (symbol__init() < 0)
return -1;
if (p->current->state != TYPE_NONE)
pid_put_sample(sw->next_pid, p->current->state, cpu, p->current->state_since, timestamp);
- p->current->state_since = timestamp;
- p->current->state = TYPE_RUNNING;
+ p->current->state_since = timestamp;
+ p->current->state = TYPE_RUNNING;
}
if (prev_p->current) {
#include "builtin.h"
-#include "util/util.h"
+#include "perf.h"
#include "util/cache.h"
+#include "util/debug.h"
+#include "util/exec_cmd.h"
+#include "util/header.h"
+#include "util/parse-options.h"
+#include "util/session.h"
#include "util/symbol.h"
#include "util/thread.h"
-#include "util/header.h"
-#include "util/exec_cmd.h"
#include "util/trace-event.h"
-#include "util/session.h"
+#include "util/util.h"
static char const *script_name;
static char const *generate_script_lang;
return scripting_ops->stop_script();
}
-#include "util/parse-options.h"
-
-#include "perf.h"
-#include "util/debug.h"
-
-#include "util/trace-event.h"
-#include "util/exec_cmd.h"
-
static char const *input_name = "perf.data";
static int process_sample_event(event_t *event, struct perf_session *session)
if (verbose >= level) {
va_start(args, fmt);
if (use_browser > 0)
- ret = browser__show_help(fmt, args);
+ ret = ui_helpline__show_help(fmt, args);
else
ret = vfprintf(stderr, fmt, args);
va_end(args);
struct ui_progress;
#ifdef NO_NEWT_SUPPORT
-static inline int browser__show_help(const char *format __used, va_list ap __used)
+static inline int ui_helpline__show_help(const char *format __used, va_list ap __used)
{
return 0;
}
static inline void ui_progress__delete(struct ui_progress *self __used) {}
#else
-int browser__show_help(const char *format, va_list ap);
-struct ui_progress *ui_progress__new(const char *title, u64 total);
-void ui_progress__update(struct ui_progress *self, u64 curr);
-void ui_progress__delete(struct ui_progress *self);
+extern char ui_helpline__last_msg[];
+int ui_helpline__show_help(const char *format, va_list ap);
+#include "ui/progress.h"
#endif
#endif /* __PERF_DEBUG_H */
if (!se->elide)
ret += 2 + hists__col_len(self, se->se_width_idx);
+ if (verbose) /* Addr + origin */
+ ret += 3 + BITS_PER_LONG / 4;
+
return ret;
}
return 0;
}
-static struct objdump_line *objdump_line__new(s64 offset, char *line)
+static struct objdump_line *objdump_line__new(s64 offset, char *line, size_t privsize)
{
- struct objdump_line *self = malloc(sizeof(*self));
+ struct objdump_line *self = malloc(sizeof(*self) + privsize);
if (self != NULL) {
self->offset = offset;
}
static int hist_entry__parse_objdump_line(struct hist_entry *self, FILE *file,
- struct list_head *head)
+ struct list_head *head, size_t privsize)
{
struct symbol *sym = self->ms.sym;
struct objdump_line *objdump_line;
offset = -1;
}
- objdump_line = objdump_line__new(offset, line);
+ objdump_line = objdump_line__new(offset, line, privsize);
if (objdump_line == NULL) {
free(line);
return -1;
return 0;
}
-int hist_entry__annotate(struct hist_entry *self, struct list_head *head)
+int hist_entry__annotate(struct hist_entry *self, struct list_head *head,
+ size_t privsize)
{
struct symbol *sym = self->ms.sym;
struct map *map = self->ms.map;
goto out_free_filename;
while (!feof(file))
- if (hist_entry__parse_objdump_line(self, file, head) < 0)
+ if (hist_entry__parse_objdump_line(self, file, head, privsize) < 0)
break;
pclose(file);
bool show_displacement, FILE *fp);
int hist_entry__inc_addr_samples(struct hist_entry *self, u64 ip);
-int hist_entry__annotate(struct hist_entry *self, struct list_head *head);
+int hist_entry__annotate(struct hist_entry *self, struct list_head *head,
+ size_t privsize);
void hists__filter_by_dso(struct hists *self, const struct dso *dso);
void hists__filter_by_thread(struct hists *self, const struct thread *thread);
begin->prev->next = end->next;
end->next->prev = begin->prev;
}
+
+/**
+ * list_for_each_from - iterate over a list from one of its nodes
+ * @pos: the &struct list_head to use as a loop cursor, from where to start
+ * @head: the head for your list.
+ */
+#define list_for_each_from(pos, head) \
+ for (; prefetch(pos->next), pos != (head); pos = pos->next)
#endif
#define DECLARE_BITMAP(name,bits) \
unsigned long name[BITS_TO_LONGS(bits)]
+struct list_head {
+ struct list_head *next, *prev;
+};
+
+struct hlist_head {
+ struct hlist_node *first;
+};
+
+struct hlist_node {
+ struct hlist_node *next, **pprev;
+};
+
#endif
+++ /dev/null
-#define _GNU_SOURCE
-#include <stdio.h>
-#undef _GNU_SOURCE
-/*
- * slang versions <= 2.0.6 have a "#if HAVE_LONG_LONG" that breaks
- * the build if it isn't defined. Use the equivalent one that glibc
- * has on features.h.
- */
-#include <features.h>
-#ifndef HAVE_LONG_LONG
-#define HAVE_LONG_LONG __GLIBC_HAVE_LONG_LONG
-#endif
-#include <slang.h>
-#include <signal.h>
-#include <stdlib.h>
-#include <newt.h>
-#include <sys/ttydefaults.h>
-
-#include "cache.h"
-#include "hist.h"
-#include "pstack.h"
-#include "session.h"
-#include "sort.h"
-#include "symbol.h"
-
-#if SLANG_VERSION < 20104
-#define slsmg_printf(msg, args...) SLsmg_printf((char *)msg, ##args)
-#define slsmg_write_nstring(msg, len) SLsmg_write_nstring((char *)msg, len)
-#define sltt_set_color(obj, name, fg, bg) SLtt_set_color(obj,(char *)name,\
- (char *)fg, (char *)bg)
-#else
-#define slsmg_printf SLsmg_printf
-#define slsmg_write_nstring SLsmg_write_nstring
-#define sltt_set_color SLtt_set_color
-#endif
-
-struct ui_progress {
- newtComponent form, scale;
-};
-
-struct ui_progress *ui_progress__new(const char *title, u64 total)
-{
- struct ui_progress *self = malloc(sizeof(*self));
-
- if (self != NULL) {
- int cols;
-
- if (use_browser <= 0)
- return self;
- newtGetScreenSize(&cols, NULL);
- cols -= 4;
- newtCenteredWindow(cols, 1, title);
- self->form = newtForm(NULL, NULL, 0);
- if (self->form == NULL)
- goto out_free_self;
- self->scale = newtScale(0, 0, cols, total);
- if (self->scale == NULL)
- goto out_free_form;
- newtFormAddComponent(self->form, self->scale);
- newtRefresh();
- }
-
- return self;
-
-out_free_form:
- newtFormDestroy(self->form);
-out_free_self:
- free(self);
- return NULL;
-}
-
-void ui_progress__update(struct ui_progress *self, u64 curr)
-{
- /*
- * FIXME: We should have a per UI backend way of showing progress,
- * stdio will just show a percentage as NN%, etc.
- */
- if (use_browser <= 0)
- return;
- newtScaleSet(self->scale, curr);
- newtRefresh();
-}
-
-void ui_progress__delete(struct ui_progress *self)
-{
- if (use_browser > 0) {
- newtFormDestroy(self->form);
- newtPopWindow();
- }
- free(self);
-}
-
-static void ui_helpline__pop(void)
-{
- newtPopHelpLine();
-}
-
-static void ui_helpline__push(const char *msg)
-{
- newtPushHelpLine(msg);
-}
-
-static void ui_helpline__vpush(const char *fmt, va_list ap)
-{
- char *s;
-
- if (vasprintf(&s, fmt, ap) < 0)
- vfprintf(stderr, fmt, ap);
- else {
- ui_helpline__push(s);
- free(s);
- }
-}
-
-static void ui_helpline__fpush(const char *fmt, ...)
-{
- va_list ap;
-
- va_start(ap, fmt);
- ui_helpline__vpush(fmt, ap);
- va_end(ap);
-}
-
-static void ui_helpline__puts(const char *msg)
-{
- ui_helpline__pop();
- ui_helpline__push(msg);
-}
-
-static char browser__last_msg[1024];
-
-int browser__show_help(const char *format, va_list ap)
-{
- int ret;
- static int backlog;
-
- ret = vsnprintf(browser__last_msg + backlog,
- sizeof(browser__last_msg) - backlog, format, ap);
- backlog += ret;
-
- if (browser__last_msg[backlog - 1] == '\n') {
- ui_helpline__puts(browser__last_msg);
- newtRefresh();
- backlog = 0;
- }
-
- return ret;
-}
-
-static void newt_form__set_exit_keys(newtComponent self)
-{
- newtFormAddHotKey(self, NEWT_KEY_LEFT);
- newtFormAddHotKey(self, NEWT_KEY_ESCAPE);
- newtFormAddHotKey(self, 'Q');
- newtFormAddHotKey(self, 'q');
- newtFormAddHotKey(self, CTRL('c'));
-}
-
-static newtComponent newt_form__new(void)
-{
- newtComponent self = newtForm(NULL, NULL, 0);
- if (self)
- newt_form__set_exit_keys(self);
- return self;
-}
-
-static int popup_menu(int argc, char * const argv[])
-{
- struct newtExitStruct es;
- int i, rc = -1, max_len = 5;
- newtComponent listbox, form = newt_form__new();
-
- if (form == NULL)
- return -1;
-
- listbox = newtListbox(0, 0, argc, NEWT_FLAG_RETURNEXIT);
- if (listbox == NULL)
- goto out_destroy_form;
-
- newtFormAddComponent(form, listbox);
-
- for (i = 0; i < argc; ++i) {
- int len = strlen(argv[i]);
- if (len > max_len)
- max_len = len;
- if (newtListboxAddEntry(listbox, argv[i], (void *)(long)i))
- goto out_destroy_form;
- }
-
- newtCenteredWindow(max_len, argc, NULL);
- newtFormRun(form, &es);
- rc = newtListboxGetCurrent(listbox) - NULL;
- if (es.reason == NEWT_EXIT_HOTKEY)
- rc = -1;
- newtPopWindow();
-out_destroy_form:
- newtFormDestroy(form);
- return rc;
-}
-
-static int ui__help_window(const char *text)
-{
- struct newtExitStruct es;
- newtComponent tb, form = newt_form__new();
- int rc = -1;
- int max_len = 0, nr_lines = 0;
- const char *t;
-
- if (form == NULL)
- return -1;
-
- t = text;
- while (1) {
- const char *sep = strchr(t, '\n');
- int len;
-
- if (sep == NULL)
- sep = strchr(t, '\0');
- len = sep - t;
- if (max_len < len)
- max_len = len;
- ++nr_lines;
- if (*sep == '\0')
- break;
- t = sep + 1;
- }
-
- tb = newtTextbox(0, 0, max_len, nr_lines, 0);
- if (tb == NULL)
- goto out_destroy_form;
-
- newtTextboxSetText(tb, text);
- newtFormAddComponent(form, tb);
- newtCenteredWindow(max_len, nr_lines, NULL);
- newtFormRun(form, &es);
- newtPopWindow();
- rc = 0;
-out_destroy_form:
- newtFormDestroy(form);
- return rc;
-}
-
-static bool dialog_yesno(const char *msg)
-{
- /* newtWinChoice should really be accepting const char pointers... */
- char yes[] = "Yes", no[] = "No";
- return newtWinChoice(NULL, yes, no, (char *)msg) == 1;
-}
-
-static void ui__error_window(const char *fmt, ...)
-{
- va_list ap;
-
- va_start(ap, fmt);
- newtWinMessagev((char *)"Error", (char *)"Ok", (char *)fmt, ap);
- va_end(ap);
-}
-
-#define HE_COLORSET_TOP 50
-#define HE_COLORSET_MEDIUM 51
-#define HE_COLORSET_NORMAL 52
-#define HE_COLORSET_SELECTED 53
-#define HE_COLORSET_CODE 54
-
-static int ui_browser__percent_color(double percent, bool current)
-{
- if (current)
- return HE_COLORSET_SELECTED;
- if (percent >= MIN_RED)
- return HE_COLORSET_TOP;
- if (percent >= MIN_GREEN)
- return HE_COLORSET_MEDIUM;
- return HE_COLORSET_NORMAL;
-}
-
-struct ui_browser {
- newtComponent form, sb;
- u64 index, first_visible_entry_idx;
- void *first_visible_entry, *entries;
- u16 top, left, width, height;
- void *priv;
- unsigned int (*refresh_entries)(struct ui_browser *self);
- void (*seek)(struct ui_browser *self,
- off_t offset, int whence);
- u32 nr_entries;
-};
-
-static void ui_browser__list_head_seek(struct ui_browser *self,
- off_t offset, int whence)
-{
- struct list_head *head = self->entries;
- struct list_head *pos;
-
- switch (whence) {
- case SEEK_SET:
- pos = head->next;
- break;
- case SEEK_CUR:
- pos = self->first_visible_entry;
- break;
- case SEEK_END:
- pos = head->prev;
- break;
- default:
- return;
- }
-
- if (offset > 0) {
- while (offset-- != 0)
- pos = pos->next;
- } else {
- while (offset++ != 0)
- pos = pos->prev;
- }
-
- self->first_visible_entry = pos;
-}
-
-static bool ui_browser__is_current_entry(struct ui_browser *self, unsigned row)
-{
- return (self->first_visible_entry_idx + row) == self->index;
-}
-
-static void ui_browser__refresh_dimensions(struct ui_browser *self)
-{
- int cols, rows;
- newtGetScreenSize(&cols, &rows);
-
- if (self->width > cols - 4)
- self->width = cols - 4;
- self->height = rows - 5;
- if (self->height > self->nr_entries)
- self->height = self->nr_entries;
- self->top = (rows - self->height) / 2;
- self->left = (cols - self->width) / 2;
-}
-
-static void ui_browser__reset_index(struct ui_browser *self)
-{
- self->index = self->first_visible_entry_idx = 0;
- self->seek(self, 0, SEEK_SET);
-}
-
-static int ui_browser__show(struct ui_browser *self, const char *title)
-{
- if (self->form != NULL) {
- newtFormDestroy(self->form);
- newtPopWindow();
- }
- ui_browser__refresh_dimensions(self);
- newtCenteredWindow(self->width, self->height, title);
- self->form = newt_form__new();
- if (self->form == NULL)
- return -1;
-
- self->sb = newtVerticalScrollbar(self->width, 0, self->height,
- HE_COLORSET_NORMAL,
- HE_COLORSET_SELECTED);
- if (self->sb == NULL)
- return -1;
-
- newtFormAddHotKey(self->form, NEWT_KEY_UP);
- newtFormAddHotKey(self->form, NEWT_KEY_DOWN);
- newtFormAddHotKey(self->form, NEWT_KEY_PGUP);
- newtFormAddHotKey(self->form, NEWT_KEY_PGDN);
- newtFormAddHotKey(self->form, NEWT_KEY_HOME);
- newtFormAddHotKey(self->form, NEWT_KEY_END);
- newtFormAddComponent(self->form, self->sb);
- return 0;
-}
-
-static int objdump_line__show(struct objdump_line *self, struct list_head *head,
- int width, struct hist_entry *he, int len,
- bool current_entry)
-{
- if (self->offset != -1) {
- struct symbol *sym = he->ms.sym;
- unsigned int hits = 0;
- double percent = 0.0;
- int color;
- struct sym_priv *priv = symbol__priv(sym);
- struct sym_ext *sym_ext = priv->ext;
- struct sym_hist *h = priv->hist;
- s64 offset = self->offset;
- struct objdump_line *next = objdump__get_next_ip_line(head, self);
-
- while (offset < (s64)len &&
- (next == NULL || offset < next->offset)) {
- if (sym_ext) {
- percent += sym_ext[offset].percent;
- } else
- hits += h->ip[offset];
-
- ++offset;
- }
-
- if (sym_ext == NULL && h->sum)
- percent = 100.0 * hits / h->sum;
-
- color = ui_browser__percent_color(percent, current_entry);
- SLsmg_set_color(color);
- slsmg_printf(" %7.2f ", percent);
- if (!current_entry)
- SLsmg_set_color(HE_COLORSET_CODE);
- } else {
- int color = ui_browser__percent_color(0, current_entry);
- SLsmg_set_color(color);
- slsmg_write_nstring(" ", 9);
- }
-
- SLsmg_write_char(':');
- slsmg_write_nstring(" ", 8);
- if (!*self->line)
- slsmg_write_nstring(" ", width - 18);
- else
- slsmg_write_nstring(self->line, width - 18);
-
- return 0;
-}
-
-static int ui_browser__refresh_entries(struct ui_browser *self)
-{
- int row;
-
- newtScrollbarSet(self->sb, self->index, self->nr_entries - 1);
- row = self->refresh_entries(self);
- SLsmg_set_color(HE_COLORSET_NORMAL);
- SLsmg_fill_region(self->top + row, self->left,
- self->height - row, self->width, ' ');
-
- return 0;
-}
-
-static int ui_browser__run(struct ui_browser *self, struct newtExitStruct *es)
-{
- if (ui_browser__refresh_entries(self) < 0)
- return -1;
-
- while (1) {
- off_t offset;
-
- newtFormRun(self->form, es);
-
- if (es->reason != NEWT_EXIT_HOTKEY)
- break;
- if (is_exit_key(es->u.key))
- return es->u.key;
- switch (es->u.key) {
- case NEWT_KEY_DOWN:
- if (self->index == self->nr_entries - 1)
- break;
- ++self->index;
- if (self->index == self->first_visible_entry_idx + self->height) {
- ++self->first_visible_entry_idx;
- self->seek(self, +1, SEEK_CUR);
- }
- break;
- case NEWT_KEY_UP:
- if (self->index == 0)
- break;
- --self->index;
- if (self->index < self->first_visible_entry_idx) {
- --self->first_visible_entry_idx;
- self->seek(self, -1, SEEK_CUR);
- }
- break;
- case NEWT_KEY_PGDN:
- case ' ':
- if (self->first_visible_entry_idx + self->height > self->nr_entries - 1)
- break;
-
- offset = self->height;
- if (self->index + offset > self->nr_entries - 1)
- offset = self->nr_entries - 1 - self->index;
- self->index += offset;
- self->first_visible_entry_idx += offset;
- self->seek(self, +offset, SEEK_CUR);
- break;
- case NEWT_KEY_PGUP:
- if (self->first_visible_entry_idx == 0)
- break;
-
- if (self->first_visible_entry_idx < self->height)
- offset = self->first_visible_entry_idx;
- else
- offset = self->height;
-
- self->index -= offset;
- self->first_visible_entry_idx -= offset;
- self->seek(self, -offset, SEEK_CUR);
- break;
- case NEWT_KEY_HOME:
- ui_browser__reset_index(self);
- break;
- case NEWT_KEY_END:
- offset = self->height - 1;
- if (offset >= self->nr_entries)
- offset = self->nr_entries - 1;
-
- self->index = self->nr_entries - 1;
- self->first_visible_entry_idx = self->index - offset;
- self->seek(self, -offset, SEEK_END);
- break;
- default:
- return es->u.key;
- }
- if (ui_browser__refresh_entries(self) < 0)
- return -1;
- }
- return 0;
-}
-
-static char *callchain_list__sym_name(struct callchain_list *self,
- char *bf, size_t bfsize)
-{
- if (self->ms.sym)
- return self->ms.sym->name;
-
- snprintf(bf, bfsize, "%#Lx", self->ip);
- return bf;
-}
-
-static unsigned int hist_entry__annotate_browser_refresh(struct ui_browser *self)
-{
- struct objdump_line *pos;
- struct list_head *head = self->entries;
- struct hist_entry *he = self->priv;
- int row = 0;
- int len = he->ms.sym->end - he->ms.sym->start;
-
- if (self->first_visible_entry == NULL || self->first_visible_entry == self->entries)
- self->first_visible_entry = head->next;
-
- pos = list_entry(self->first_visible_entry, struct objdump_line, node);
-
- list_for_each_entry_from(pos, head, node) {
- bool current_entry = ui_browser__is_current_entry(self, row);
- SLsmg_gotorc(self->top + row, self->left);
- objdump_line__show(pos, head, self->width,
- he, len, current_entry);
- if (++row == self->height)
- break;
- }
-
- return row;
-}
-
-int hist_entry__tui_annotate(struct hist_entry *self)
-{
- struct ui_browser browser;
- struct newtExitStruct es;
- struct objdump_line *pos, *n;
- LIST_HEAD(head);
- int ret;
-
- if (self->ms.sym == NULL)
- return -1;
-
- if (self->ms.map->dso->annotate_warned)
- return -1;
-
- if (hist_entry__annotate(self, &head) < 0) {
- ui__error_window(browser__last_msg);
- return -1;
- }
-
- ui_helpline__push("Press <- or ESC to exit");
-
- memset(&browser, 0, sizeof(browser));
- browser.entries = &head;
- browser.refresh_entries = hist_entry__annotate_browser_refresh;
- browser.seek = ui_browser__list_head_seek;
- browser.priv = self;
- list_for_each_entry(pos, &head, node) {
- size_t line_len = strlen(pos->line);
- if (browser.width < line_len)
- browser.width = line_len;
- ++browser.nr_entries;
- }
-
- browser.width += 18; /* Percentage */
- ui_browser__show(&browser, self->ms.sym->name);
- newtFormAddHotKey(browser.form, ' ');
- ret = ui_browser__run(&browser, &es);
- newtFormDestroy(browser.form);
- newtPopWindow();
- list_for_each_entry_safe(pos, n, &head, node) {
- list_del(&pos->node);
- objdump_line__free(pos);
- }
- ui_helpline__pop();
- return ret;
-}
-
-struct hist_browser {
- struct ui_browser b;
- struct hists *hists;
- struct hist_entry *he_selection;
- struct map_symbol *selection;
-};
-
-static void hist_browser__reset(struct hist_browser *self);
-static int hist_browser__run(struct hist_browser *self, const char *title,
- struct newtExitStruct *es);
-static unsigned int hist_browser__refresh_entries(struct ui_browser *self);
-static void ui_browser__hists_seek(struct ui_browser *self,
- off_t offset, int whence);
-
-static struct hist_browser *hist_browser__new(struct hists *hists)
-{
- struct hist_browser *self = zalloc(sizeof(*self));
-
- if (self) {
- self->hists = hists;
- self->b.refresh_entries = hist_browser__refresh_entries;
- self->b.seek = ui_browser__hists_seek;
- }
-
- return self;
-}
-
-static void hist_browser__delete(struct hist_browser *self)
-{
- newtFormDestroy(self->b.form);
- newtPopWindow();
- free(self);
-}
-
-static struct hist_entry *hist_browser__selected_entry(struct hist_browser *self)
-{
- return self->he_selection;
-}
-
-static struct thread *hist_browser__selected_thread(struct hist_browser *self)
-{
- return self->he_selection->thread;
-}
-
-static int hist_browser__title(char *bf, size_t size, const char *ev_name,
- const struct dso *dso, const struct thread *thread)
-{
- int printed = 0;
-
- if (thread)
- printed += snprintf(bf + printed, size - printed,
- "Thread: %s(%d)",
- (thread->comm_set ? thread->comm : ""),
- thread->pid);
- if (dso)
- printed += snprintf(bf + printed, size - printed,
- "%sDSO: %s", thread ? " " : "",
- dso->short_name);
- return printed ?: snprintf(bf, size, "Event: %s", ev_name);
-}
-
-int hists__browse(struct hists *self, const char *helpline, const char *ev_name)
-{
- struct hist_browser *browser = hist_browser__new(self);
- struct pstack *fstack;
- const struct thread *thread_filter = NULL;
- const struct dso *dso_filter = NULL;
- struct newtExitStruct es;
- char msg[160];
- int key = -1;
-
- if (browser == NULL)
- return -1;
-
- fstack = pstack__new(2);
- if (fstack == NULL)
- goto out;
-
- ui_helpline__push(helpline);
-
- hist_browser__title(msg, sizeof(msg), ev_name,
- dso_filter, thread_filter);
-
- while (1) {
- const struct thread *thread;
- const struct dso *dso;
- char *options[16];
- int nr_options = 0, choice = 0, i,
- annotate = -2, zoom_dso = -2, zoom_thread = -2;
-
- if (hist_browser__run(browser, msg, &es))
- break;
-
- thread = hist_browser__selected_thread(browser);
- dso = browser->selection->map ? browser->selection->map->dso : NULL;
-
- if (es.reason == NEWT_EXIT_HOTKEY) {
- key = es.u.key;
-
- switch (key) {
- case NEWT_KEY_F1:
- goto do_help;
- case NEWT_KEY_TAB:
- case NEWT_KEY_UNTAB:
- /*
- * Exit the browser, let hists__browser_tree
- * go to the next or previous
- */
- goto out_free_stack;
- default:;
- }
-
- key = toupper(key);
- switch (key) {
- case 'A':
- if (browser->selection->map == NULL &&
- browser->selection->map->dso->annotate_warned)
- continue;
- goto do_annotate;
- case 'D':
- goto zoom_dso;
- case 'T':
- goto zoom_thread;
- case 'H':
- case '?':
-do_help:
- ui__help_window("-> Zoom into DSO/Threads & Annotate current symbol\n"
- "<- Zoom out\n"
- "a Annotate current symbol\n"
- "h/?/F1 Show this window\n"
- "d Zoom into current DSO\n"
- "t Zoom into current Thread\n"
- "q/CTRL+C Exit browser");
- continue;
- default:;
- }
- if (is_exit_key(key)) {
- if (key == NEWT_KEY_ESCAPE) {
- if (dialog_yesno("Do you really want to exit?"))
- break;
- else
- continue;
- } else
- break;
- }
-
- if (es.u.key == NEWT_KEY_LEFT) {
- const void *top;
-
- if (pstack__empty(fstack))
- continue;
- top = pstack__pop(fstack);
- if (top == &dso_filter)
- goto zoom_out_dso;
- if (top == &thread_filter)
- goto zoom_out_thread;
- continue;
- }
- }
-
- if (browser->selection->sym != NULL &&
- !browser->selection->map->dso->annotate_warned &&
- asprintf(&options[nr_options], "Annotate %s",
- browser->selection->sym->name) > 0)
- annotate = nr_options++;
-
- if (thread != NULL &&
- asprintf(&options[nr_options], "Zoom %s %s(%d) thread",
- (thread_filter ? "out of" : "into"),
- (thread->comm_set ? thread->comm : ""),
- thread->pid) > 0)
- zoom_thread = nr_options++;
-
- if (dso != NULL &&
- asprintf(&options[nr_options], "Zoom %s %s DSO",
- (dso_filter ? "out of" : "into"),
- (dso->kernel ? "the Kernel" : dso->short_name)) > 0)
- zoom_dso = nr_options++;
-
- options[nr_options++] = (char *)"Exit";
-
- choice = popup_menu(nr_options, options);
-
- for (i = 0; i < nr_options - 1; ++i)
- free(options[i]);
-
- if (choice == nr_options - 1)
- break;
-
- if (choice == -1)
- continue;
-
- if (choice == annotate) {
- struct hist_entry *he;
-do_annotate:
- if (browser->selection->map->dso->origin == DSO__ORIG_KERNEL) {
- browser->selection->map->dso->annotate_warned = 1;
- ui_helpline__puts("No vmlinux file found, can't "
- "annotate with just a "
- "kallsyms file");
- continue;
- }
-
- he = hist_browser__selected_entry(browser);
- if (he == NULL)
- continue;
-
- hist_entry__tui_annotate(he);
- } else if (choice == zoom_dso) {
-zoom_dso:
- if (dso_filter) {
- pstack__remove(fstack, &dso_filter);
-zoom_out_dso:
- ui_helpline__pop();
- dso_filter = NULL;
- } else {
- if (dso == NULL)
- continue;
- ui_helpline__fpush("To zoom out press <- or -> + \"Zoom out of %s DSO\"",
- dso->kernel ? "the Kernel" : dso->short_name);
- dso_filter = dso;
- pstack__push(fstack, &dso_filter);
- }
- hists__filter_by_dso(self, dso_filter);
- hist_browser__title(msg, sizeof(msg), ev_name,
- dso_filter, thread_filter);
- hist_browser__reset(browser);
- } else if (choice == zoom_thread) {
-zoom_thread:
- if (thread_filter) {
- pstack__remove(fstack, &thread_filter);
-zoom_out_thread:
- ui_helpline__pop();
- thread_filter = NULL;
- } else {
- ui_helpline__fpush("To zoom out press <- or -> + \"Zoom out of %s(%d) thread\"",
- thread->comm_set ? thread->comm : "",
- thread->pid);
- thread_filter = thread;
- pstack__push(fstack, &thread_filter);
- }
- hists__filter_by_thread(self, thread_filter);
- hist_browser__title(msg, sizeof(msg), ev_name,
- dso_filter, thread_filter);
- hist_browser__reset(browser);
- }
- }
-out_free_stack:
- pstack__delete(fstack);
-out:
- hist_browser__delete(browser);
- return key;
-}
-
-int hists__tui_browse_tree(struct rb_root *self, const char *help)
-{
- struct rb_node *first = rb_first(self), *nd = first, *next;
- int key = 0;
-
- while (nd) {
- struct hists *hists = rb_entry(nd, struct hists, rb_node);
- const char *ev_name = __event_name(hists->type, hists->config);
-
- key = hists__browse(hists, help, ev_name);
-
- if (is_exit_key(key))
- break;
-
- switch (key) {
- case NEWT_KEY_TAB:
- next = rb_next(nd);
- if (next)
- nd = next;
- break;
- case NEWT_KEY_UNTAB:
- if (nd == first)
- continue;
- nd = rb_prev(nd);
- default:
- break;
- }
- }
-
- return key;
-}
-
-static struct newtPercentTreeColors {
- const char *topColorFg, *topColorBg;
- const char *mediumColorFg, *mediumColorBg;
- const char *normalColorFg, *normalColorBg;
- const char *selColorFg, *selColorBg;
- const char *codeColorFg, *codeColorBg;
-} defaultPercentTreeColors = {
- "red", "lightgray",
- "green", "lightgray",
- "black", "lightgray",
- "lightgray", "magenta",
- "blue", "lightgray",
-};
-
-static void newt_suspend(void *d __used)
-{
- newtSuspend();
- raise(SIGTSTP);
- newtResume();
-}
-
-void setup_browser(void)
-{
- struct newtPercentTreeColors *c = &defaultPercentTreeColors;
-
- if (!isatty(1) || !use_browser || dump_trace) {
- use_browser = 0;
- setup_pager();
- return;
- }
-
- use_browser = 1;
- newtInit();
- newtCls();
- newtSetSuspendCallback(newt_suspend, NULL);
- ui_helpline__puts(" ");
- sltt_set_color(HE_COLORSET_TOP, NULL, c->topColorFg, c->topColorBg);
- sltt_set_color(HE_COLORSET_MEDIUM, NULL, c->mediumColorFg, c->mediumColorBg);
- sltt_set_color(HE_COLORSET_NORMAL, NULL, c->normalColorFg, c->normalColorBg);
- sltt_set_color(HE_COLORSET_SELECTED, NULL, c->selColorFg, c->selColorBg);
- sltt_set_color(HE_COLORSET_CODE, NULL, c->codeColorFg, c->codeColorBg);
-}
-
-void exit_browser(bool wait_for_ok)
-{
- if (use_browser > 0) {
- if (wait_for_ok) {
- char title[] = "Fatal Error", ok[] = "Ok";
- newtWinMessage(title, ok, browser__last_msg);
- }
- newtFinished();
- }
-}
-
-static void hist_browser__refresh_dimensions(struct hist_browser *self)
-{
- /* 3 == +/- toggle symbol before actual hist_entry rendering */
- self->b.width = 3 + (hists__sort_list_width(self->hists) +
- sizeof("[k]"));
-}
-
-static void hist_browser__reset(struct hist_browser *self)
-{
- self->b.nr_entries = self->hists->nr_entries;
- hist_browser__refresh_dimensions(self);
- ui_browser__reset_index(&self->b);
-}
-
-static char tree__folded_sign(bool unfolded)
-{
- return unfolded ? '-' : '+';
-}
-
-static char map_symbol__folded(const struct map_symbol *self)
-{
- return self->has_children ? tree__folded_sign(self->unfolded) : ' ';
-}
-
-static char hist_entry__folded(const struct hist_entry *self)
-{
- return map_symbol__folded(&self->ms);
-}
-
-static char callchain_list__folded(const struct callchain_list *self)
-{
- return map_symbol__folded(&self->ms);
-}
-
-static bool map_symbol__toggle_fold(struct map_symbol *self)
-{
- if (!self->has_children)
- return false;
-
- self->unfolded = !self->unfolded;
- return true;
-}
-
-#define LEVEL_OFFSET_STEP 3
-
-static int hist_browser__show_callchain_node_rb_tree(struct hist_browser *self,
- struct callchain_node *chain_node,
- u64 total, int level,
- unsigned short row,
- off_t *row_offset,
- bool *is_current_entry)
-{
- struct rb_node *node;
- int first_row = row, width, offset = level * LEVEL_OFFSET_STEP;
- u64 new_total, remaining;
-
- if (callchain_param.mode == CHAIN_GRAPH_REL)
- new_total = chain_node->children_hit;
- else
- new_total = total;
-
- remaining = new_total;
- node = rb_first(&chain_node->rb_root);
- while (node) {
- struct callchain_node *child = rb_entry(node, struct callchain_node, rb_node);
- struct rb_node *next = rb_next(node);
- u64 cumul = cumul_hits(child);
- struct callchain_list *chain;
- char folded_sign = ' ';
- int first = true;
- int extra_offset = 0;
-
- remaining -= cumul;
-
- list_for_each_entry(chain, &child->val, list) {
- char ipstr[BITS_PER_LONG / 4 + 1], *alloc_str;
- const char *str;
- int color;
- bool was_first = first;
-
- if (first) {
- first = false;
- chain->ms.has_children = chain->list.next != &child->val ||
- rb_first(&child->rb_root) != NULL;
- } else {
- extra_offset = LEVEL_OFFSET_STEP;
- chain->ms.has_children = chain->list.next == &child->val &&
- rb_first(&child->rb_root) != NULL;
- }
-
- folded_sign = callchain_list__folded(chain);
- if (*row_offset != 0) {
- --*row_offset;
- goto do_next;
- }
-
- alloc_str = NULL;
- str = callchain_list__sym_name(chain, ipstr, sizeof(ipstr));
- if (was_first) {
- double percent = cumul * 100.0 / new_total;
-
- if (asprintf(&alloc_str, "%2.2f%% %s", percent, str) < 0)
- str = "Not enough memory!";
- else
- str = alloc_str;
- }
-
- color = HE_COLORSET_NORMAL;
- width = self->b.width - (offset + extra_offset + 2);
- if (ui_browser__is_current_entry(&self->b, row)) {
- self->selection = &chain->ms;
- color = HE_COLORSET_SELECTED;
- *is_current_entry = true;
- }
-
- SLsmg_set_color(color);
- SLsmg_gotorc(self->b.top + row, self->b.left);
- slsmg_write_nstring(" ", offset + extra_offset);
- slsmg_printf("%c ", folded_sign);
- slsmg_write_nstring(str, width);
- free(alloc_str);
-
- if (++row == self->b.height)
- goto out;
-do_next:
- if (folded_sign == '+')
- break;
- }
-
- if (folded_sign == '-') {
- const int new_level = level + (extra_offset ? 2 : 1);
- row += hist_browser__show_callchain_node_rb_tree(self, child, new_total,
- new_level, row, row_offset,
- is_current_entry);
- }
- if (row == self->b.height)
- goto out;
- node = next;
- }
-out:
- return row - first_row;
-}
-
-static int hist_browser__show_callchain_node(struct hist_browser *self,
- struct callchain_node *node,
- int level, unsigned short row,
- off_t *row_offset,
- bool *is_current_entry)
-{
- struct callchain_list *chain;
- int first_row = row,
- offset = level * LEVEL_OFFSET_STEP,
- width = self->b.width - offset;
- char folded_sign = ' ';
-
- list_for_each_entry(chain, &node->val, list) {
- char ipstr[BITS_PER_LONG / 4 + 1], *s;
- int color;
- /*
- * FIXME: This should be moved to somewhere else,
- * probably when the callchain is created, so as not to
- * traverse it all over again
- */
- chain->ms.has_children = rb_first(&node->rb_root) != NULL;
- folded_sign = callchain_list__folded(chain);
-
- if (*row_offset != 0) {
- --*row_offset;
- continue;
- }
-
- color = HE_COLORSET_NORMAL;
- if (ui_browser__is_current_entry(&self->b, row)) {
- self->selection = &chain->ms;
- color = HE_COLORSET_SELECTED;
- *is_current_entry = true;
- }
-
- s = callchain_list__sym_name(chain, ipstr, sizeof(ipstr));
- SLsmg_gotorc(self->b.top + row, self->b.left);
- SLsmg_set_color(color);
- slsmg_write_nstring(" ", offset);
- slsmg_printf("%c ", folded_sign);
- slsmg_write_nstring(s, width - 2);
-
- if (++row == self->b.height)
- goto out;
- }
-
- if (folded_sign == '-')
- row += hist_browser__show_callchain_node_rb_tree(self, node,
- self->hists->stats.total_period,
- level + 1, row,
- row_offset,
- is_current_entry);
-out:
- return row - first_row;
-}
-
-static int hist_browser__show_callchain(struct hist_browser *self,
- struct rb_root *chain,
- int level, unsigned short row,
- off_t *row_offset,
- bool *is_current_entry)
-{
- struct rb_node *nd;
- int first_row = row;
-
- for (nd = rb_first(chain); nd; nd = rb_next(nd)) {
- struct callchain_node *node = rb_entry(nd, struct callchain_node, rb_node);
-
- row += hist_browser__show_callchain_node(self, node, level,
- row, row_offset,
- is_current_entry);
- if (row == self->b.height)
- break;
- }
-
- return row - first_row;
-}
-
-static int hist_browser__show_entry(struct hist_browser *self,
- struct hist_entry *entry,
- unsigned short row)
-{
- char s[256];
- double percent;
- int printed = 0;
- int color, width = self->b.width;
- char folded_sign = ' ';
- bool current_entry = ui_browser__is_current_entry(&self->b, row);
- off_t row_offset = entry->row_offset;
-
- if (current_entry) {
- self->he_selection = entry;
- self->selection = &entry->ms;
- }
-
- if (symbol_conf.use_callchain) {
- entry->ms.has_children = !RB_EMPTY_ROOT(&entry->sorted_chain);
- folded_sign = hist_entry__folded(entry);
- }
-
- if (row_offset == 0) {
- hist_entry__snprintf(entry, s, sizeof(s), self->hists, NULL, false,
- 0, false, self->hists->stats.total_period);
- percent = (entry->period * 100.0) / self->hists->stats.total_period;
-
- color = HE_COLORSET_SELECTED;
- if (!current_entry) {
- if (percent >= MIN_RED)
- color = HE_COLORSET_TOP;
- else if (percent >= MIN_GREEN)
- color = HE_COLORSET_MEDIUM;
- else
- color = HE_COLORSET_NORMAL;
- }
-
- SLsmg_set_color(color);
- SLsmg_gotorc(self->b.top + row, self->b.left);
- if (symbol_conf.use_callchain) {
- slsmg_printf("%c ", folded_sign);
- width -= 2;
- }
- slsmg_write_nstring(s, width);
- ++row;
- ++printed;
- } else
- --row_offset;
-
- if (folded_sign == '-' && row != self->b.height) {
- printed += hist_browser__show_callchain(self, &entry->sorted_chain,
- 1, row, &row_offset,
- ¤t_entry);
- if (current_entry)
- self->he_selection = entry;
- }
-
- return printed;
-}
-
-static unsigned int hist_browser__refresh_entries(struct ui_browser *self)
-{
- unsigned row = 0;
- struct rb_node *nd;
- struct hist_browser *hb = container_of(self, struct hist_browser, b);
-
- if (self->first_visible_entry == NULL)
- self->first_visible_entry = rb_first(&hb->hists->entries);
-
- for (nd = self->first_visible_entry; nd; nd = rb_next(nd)) {
- struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
-
- if (h->filtered)
- continue;
-
- row += hist_browser__show_entry(hb, h, row);
- if (row == self->height)
- break;
- }
-
- return row;
-}
-
-static void callchain_node__init_have_children_rb_tree(struct callchain_node *self)
-{
- struct rb_node *nd = rb_first(&self->rb_root);
-
- for (nd = rb_first(&self->rb_root); nd; nd = rb_next(nd)) {
- struct callchain_node *child = rb_entry(nd, struct callchain_node, rb_node);
- struct callchain_list *chain;
- int first = true;
-
- list_for_each_entry(chain, &child->val, list) {
- if (first) {
- first = false;
- chain->ms.has_children = chain->list.next != &child->val ||
- rb_first(&child->rb_root) != NULL;
- } else
- chain->ms.has_children = chain->list.next == &child->val &&
- rb_first(&child->rb_root) != NULL;
- }
-
- callchain_node__init_have_children_rb_tree(child);
- }
-}
-
-static void callchain_node__init_have_children(struct callchain_node *self)
-{
- struct callchain_list *chain;
-
- list_for_each_entry(chain, &self->val, list)
- chain->ms.has_children = rb_first(&self->rb_root) != NULL;
-
- callchain_node__init_have_children_rb_tree(self);
-}
-
-static void callchain__init_have_children(struct rb_root *self)
-{
- struct rb_node *nd;
-
- for (nd = rb_first(self); nd; nd = rb_next(nd)) {
- struct callchain_node *node = rb_entry(nd, struct callchain_node, rb_node);
- callchain_node__init_have_children(node);
- }
-}
-
-static void hist_entry__init_have_children(struct hist_entry *self)
-{
- if (!self->init_have_children) {
- callchain__init_have_children(&self->sorted_chain);
- self->init_have_children = true;
- }
-}
-
-static struct rb_node *hists__filter_entries(struct rb_node *nd)
-{
- while (nd != NULL) {
- struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
- if (!h->filtered)
- return nd;
-
- nd = rb_next(nd);
- }
-
- return NULL;
-}
-
-static struct rb_node *hists__filter_prev_entries(struct rb_node *nd)
-{
- while (nd != NULL) {
- struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
- if (!h->filtered)
- return nd;
-
- nd = rb_prev(nd);
- }
-
- return NULL;
-}
-
-static void ui_browser__hists_seek(struct ui_browser *self,
- off_t offset, int whence)
-{
- struct hist_entry *h;
- struct rb_node *nd;
- bool first = true;
-
- switch (whence) {
- case SEEK_SET:
- nd = hists__filter_entries(rb_first(self->entries));
- break;
- case SEEK_CUR:
- nd = self->first_visible_entry;
- goto do_offset;
- case SEEK_END:
- nd = hists__filter_prev_entries(rb_last(self->entries));
- first = false;
- break;
- default:
- return;
- }
-
- /*
- * Moves not relative to the first visible entry invalidates its
- * row_offset:
- */
- h = rb_entry(self->first_visible_entry, struct hist_entry, rb_node);
- h->row_offset = 0;
-
- /*
- * Here we have to check if nd is expanded (+), if it is we can't go
- * the next top level hist_entry, instead we must compute an offset of
- * what _not_ to show and not change the first visible entry.
- *
- * This offset increments when we are going from top to bottom and
- * decreases when we're going from bottom to top.
- *
- * As we don't have backpointers to the top level in the callchains
- * structure, we need to always print the whole hist_entry callchain,
- * skipping the first ones that are before the first visible entry
- * and stop when we printed enough lines to fill the screen.
- */
-do_offset:
- if (offset > 0) {
- do {
- h = rb_entry(nd, struct hist_entry, rb_node);
- if (h->ms.unfolded) {
- u16 remaining = h->nr_rows - h->row_offset;
- if (offset > remaining) {
- offset -= remaining;
- h->row_offset = 0;
- } else {
- h->row_offset += offset;
- offset = 0;
- self->first_visible_entry = nd;
- break;
- }
- }
- nd = hists__filter_entries(rb_next(nd));
- if (nd == NULL)
- break;
- --offset;
- self->first_visible_entry = nd;
- } while (offset != 0);
- } else if (offset < 0) {
- while (1) {
- h = rb_entry(nd, struct hist_entry, rb_node);
- if (h->ms.unfolded) {
- if (first) {
- if (-offset > h->row_offset) {
- offset += h->row_offset;
- h->row_offset = 0;
- } else {
- h->row_offset += offset;
- offset = 0;
- self->first_visible_entry = nd;
- break;
- }
- } else {
- if (-offset > h->nr_rows) {
- offset += h->nr_rows;
- h->row_offset = 0;
- } else {
- h->row_offset = h->nr_rows + offset;
- offset = 0;
- self->first_visible_entry = nd;
- break;
- }
- }
- }
-
- nd = hists__filter_prev_entries(rb_prev(nd));
- if (nd == NULL)
- break;
- ++offset;
- self->first_visible_entry = nd;
- if (offset == 0) {
- /*
- * Last unfiltered hist_entry, check if it is
- * unfolded, if it is then we should have
- * row_offset at its last entry.
- */
- h = rb_entry(nd, struct hist_entry, rb_node);
- if (h->ms.unfolded)
- h->row_offset = h->nr_rows;
- break;
- }
- first = false;
- }
- } else {
- self->first_visible_entry = nd;
- h = rb_entry(nd, struct hist_entry, rb_node);
- h->row_offset = 0;
- }
-}
-
-static int callchain_node__count_rows_rb_tree(struct callchain_node *self)
-{
- int n = 0;
- struct rb_node *nd;
-
- for (nd = rb_first(&self->rb_root); nd; nd = rb_next(nd)) {
- struct callchain_node *child = rb_entry(nd, struct callchain_node, rb_node);
- struct callchain_list *chain;
- char folded_sign = ' '; /* No children */
-
- list_for_each_entry(chain, &child->val, list) {
- ++n;
- /* We need this because we may not have children */
- folded_sign = callchain_list__folded(chain);
- if (folded_sign == '+')
- break;
- }
-
- if (folded_sign == '-') /* Have children and they're unfolded */
- n += callchain_node__count_rows_rb_tree(child);
- }
-
- return n;
-}
-
-static int callchain_node__count_rows(struct callchain_node *node)
-{
- struct callchain_list *chain;
- bool unfolded = false;
- int n = 0;
-
- list_for_each_entry(chain, &node->val, list) {
- ++n;
- unfolded = chain->ms.unfolded;
- }
-
- if (unfolded)
- n += callchain_node__count_rows_rb_tree(node);
-
- return n;
-}
-
-static int callchain__count_rows(struct rb_root *chain)
-{
- struct rb_node *nd;
- int n = 0;
-
- for (nd = rb_first(chain); nd; nd = rb_next(nd)) {
- struct callchain_node *node = rb_entry(nd, struct callchain_node, rb_node);
- n += callchain_node__count_rows(node);
- }
-
- return n;
-}
-
-static bool hist_browser__toggle_fold(struct hist_browser *self)
-{
- if (map_symbol__toggle_fold(self->selection)) {
- struct hist_entry *he = self->he_selection;
-
- hist_entry__init_have_children(he);
- self->hists->nr_entries -= he->nr_rows;
-
- if (he->ms.unfolded)
- he->nr_rows = callchain__count_rows(&he->sorted_chain);
- else
- he->nr_rows = 0;
- self->hists->nr_entries += he->nr_rows;
- self->b.nr_entries = self->hists->nr_entries;
-
- return true;
- }
-
- /* If it doesn't have children, no toggling performed */
- return false;
-}
-
-static int hist_browser__run(struct hist_browser *self, const char *title,
- struct newtExitStruct *es)
-{
- char str[256], unit;
- unsigned long nr_events = self->hists->stats.nr_events[PERF_RECORD_SAMPLE];
-
- self->b.entries = &self->hists->entries;
- self->b.nr_entries = self->hists->nr_entries;
-
- hist_browser__refresh_dimensions(self);
-
- nr_events = convert_unit(nr_events, &unit);
- snprintf(str, sizeof(str), "Events: %lu%c ",
- nr_events, unit);
- newtDrawRootText(0, 0, str);
-
- if (ui_browser__show(&self->b, title) < 0)
- return -1;
-
- newtFormAddHotKey(self->b.form, 'A');
- newtFormAddHotKey(self->b.form, 'a');
- newtFormAddHotKey(self->b.form, '?');
- newtFormAddHotKey(self->b.form, 'h');
- newtFormAddHotKey(self->b.form, 'H');
- newtFormAddHotKey(self->b.form, 'd');
-
- newtFormAddHotKey(self->b.form, NEWT_KEY_LEFT);
- newtFormAddHotKey(self->b.form, NEWT_KEY_RIGHT);
- newtFormAddHotKey(self->b.form, NEWT_KEY_ENTER);
-
- while (1) {
- ui_browser__run(&self->b, es);
-
- if (es->reason != NEWT_EXIT_HOTKEY)
- break;
- switch (es->u.key) {
- case 'd': { /* Debug */
- static int seq;
- struct hist_entry *h = rb_entry(self->b.first_visible_entry,
- struct hist_entry, rb_node);
- ui_helpline__pop();
- ui_helpline__fpush("%d: nr_ent=(%d,%d), height=%d, idx=%d, fve: idx=%d, row_off=%d, nrows=%d",
- seq++, self->b.nr_entries,
- self->hists->nr_entries,
- self->b.height,
- self->b.index,
- self->b.first_visible_entry_idx,
- h->row_offset, h->nr_rows);
- }
- continue;
- case NEWT_KEY_ENTER:
- if (hist_browser__toggle_fold(self))
- break;
- /* fall thru */
- default:
- return 0;
- }
- }
- return 0;
-}
/* Init vmlinux path */
ret = init_vmlinux();
- if (ret < 0)
+ if (ret < 0) {
+ free(pkgs);
return ret;
+ }
/* Loop 1: convert all events */
for (i = 0; i < npevs; i++) {
ret = __add_probe_trace_events(pkgs[i].pev, pkgs[i].tevs,
pkgs[i].ntevs, force_add);
end:
- /* Loop 3: cleanup trace events */
- for (i = 0; i < npevs; i++)
+ /* Loop 3: cleanup and free trace events */
+ for (i = 0; i < npevs; i++) {
for (j = 0; j < pkgs[i].ntevs; j++)
clear_probe_trace_event(&pkgs[i].tevs[j]);
+ free(pkgs[i].tevs);
+ }
+ free(pkgs);
return ret;
}
#include <ctype.h>
#include <dwarf-regs.h>
-#include "string.h"
#include "event.h"
#include "debug.h"
#include "util.h"
pf->tvar->value = strdup(pf->pvar->var);
if (pf->tvar->value == NULL)
return -ENOMEM;
- else
- return 0;
+ if (pf->pvar->type) {
+ pf->tvar->type = strdup(pf->pvar->type);
+ if (pf->tvar->type == NULL)
+ return -ENOMEM;
+ }
+ return 0;
}
pr_debug("Searching '%s' variable in context.\n",
#ifndef _PERF_PSTACK_
#define _PERF_PSTACK_
+#include <stdbool.h>
+
struct pstack;
struct pstack *pstack__new(unsigned short max_nr_entries);
void pstack__delete(struct pstack *self);
if (verbose) {
char o = self->ms.map ? dso__symtab_origin(self->ms.map->dso) : '!';
- ret += repsep_snprintf(bf, size, "%#018llx %c ", self->ip, o);
+ ret += repsep_snprintf(bf, size, "%*Lx %c ",
+ BITS_PER_LONG / 4, self->ip, o);
}
ret += repsep_snprintf(bf + ret, size - ret, "[%c] ", self->level);
ret += repsep_snprintf(bf + ret, size - ret, "%s",
self->ms.sym->name);
else
- ret += repsep_snprintf(bf + ret, size - ret, "%#016llx", self->ip);
+ ret += repsep_snprintf(bf + ret, size - ret, "%*Lx",
+ BITS_PER_LONG / 4, self->ip);
return ret;
}
__map_groups__fixup_end(self, i);
}
-static struct symbol *symbol__new(u64 start, u64 len, const char *name)
+static struct symbol *symbol__new(u64 start, u64 len, u8 binding,
+ const char *name)
{
size_t namelen = strlen(name) + 1;
struct symbol *self = calloc(1, (symbol_conf.priv_size +
self->start = start;
self->end = len ? start + len - 1 : start;
+ self->binding = binding;
self->namelen = namelen - 1;
pr_debug4("%s: %s %#Lx-%#Lx\n", __func__, name, start, self->end);
static size_t symbol__fprintf(struct symbol *self, FILE *fp)
{
- return fprintf(fp, " %llx-%llx %s\n",
- self->start, self->end, self->name);
+ return fprintf(fp, " %llx-%llx %c %s\n",
+ self->start, self->end,
+ self->binding == STB_GLOBAL ? 'g' :
+ self->binding == STB_LOCAL ? 'l' : 'w',
+ self->name);
}
void dso__set_long_name(struct dso *self, char *name)
struct dso *dso;
};
+static u8 kallsyms2elf_type(char type)
+{
+ if (type == 'W')
+ return STB_WEAK;
+
+ return isupper(type) ? STB_GLOBAL : STB_LOCAL;
+}
+
static int map__process_kallsym_symbol(void *arg, const char *name,
char type, u64 start)
{
/*
* Will fix up the end later, when we have all symbols sorted.
*/
- sym = symbol__new(start, 0, name);
+ sym = symbol__new(start, 0, kallsyms2elf_type(type), name);
if (sym == NULL)
return -ENOMEM;
if (len + 2 >= line_len)
continue;
- sym = symbol__new(start, size, line + len);
+ sym = symbol__new(start, size, STB_GLOBAL, line + len);
if (sym == NULL)
goto out_delete_line;
"%s@plt", elf_sym__name(&sym, symstrs));
f = symbol__new(plt_offset, shdr_plt.sh_entsize,
- sympltname);
+ STB_GLOBAL, sympltname);
if (!f)
goto out_elf_end;
"%s@plt", elf_sym__name(&sym, symstrs));
f = symbol__new(plt_offset, shdr_plt.sh_entsize,
- sympltname);
+ STB_GLOBAL, sympltname);
if (!f)
goto out_elf_end;
if (!is_label && !elf_sym__is_a(&sym, map->type))
continue;
+ /* Reject ARM ELF "mapping symbols": these aren't unique and
+ * don't identify functions, so will confuse the profile
+ * output: */
+ if (ehdr.e_machine == EM_ARM) {
+ if (!strcmp(elf_name, "$a") ||
+ !strcmp(elf_name, "$d") ||
+ !strcmp(elf_name, "$t"))
+ continue;
+ }
+
if (opdsec && sym.st_shndx == opdidx) {
u32 offset = sym.st_value - opdshdr.sh_addr;
u64 *opd = opddata->d_buf + offset;
if (demangled != NULL)
elf_name = demangled;
new_symbol:
- f = symbol__new(sym.st_value, sym.st_size, elf_name);
+ f = symbol__new(sym.st_value, sym.st_size,
+ GELF_ST_BIND(sym.st_info), elf_name);
free(demangled);
if (!f)
goto out_elf_end;
u64 start;
u64 end;
u16 namelen;
+ u8 binding;
char name[0];
};
--- /dev/null
+#define _GNU_SOURCE
+#include <stdio.h>
+#undef _GNU_SOURCE
+/*
+ * slang versions <= 2.0.6 have a "#if HAVE_LONG_LONG" that breaks
+ * the build if it isn't defined. Use the equivalent one that glibc
+ * has on features.h.
+ */
+#include <features.h>
+#ifndef HAVE_LONG_LONG
+#define HAVE_LONG_LONG __GLIBC_HAVE_LONG_LONG
+#endif
+#include <slang.h>
+#include <linux/list.h>
+#include <linux/rbtree.h>
+#include <stdlib.h>
+#include <sys/ttydefaults.h>
+#include "browser.h"
+#include "helpline.h"
+#include "../color.h"
+#include "../util.h"
+
+#if SLANG_VERSION < 20104
+#define sltt_set_color(obj, name, fg, bg) \
+ SLtt_set_color(obj,(char *)name, (char *)fg, (char *)bg)
+#else
+#define sltt_set_color SLtt_set_color
+#endif
+
+newtComponent newt_form__new(void);
+
+int ui_browser__percent_color(double percent, bool current)
+{
+ if (current)
+ return HE_COLORSET_SELECTED;
+ if (percent >= MIN_RED)
+ return HE_COLORSET_TOP;
+ if (percent >= MIN_GREEN)
+ return HE_COLORSET_MEDIUM;
+ return HE_COLORSET_NORMAL;
+}
+
+void ui_browser__list_head_seek(struct ui_browser *self, off_t offset, int whence)
+{
+ struct list_head *head = self->entries;
+ struct list_head *pos;
+
+ switch (whence) {
+ case SEEK_SET:
+ pos = head->next;
+ break;
+ case SEEK_CUR:
+ pos = self->top;
+ break;
+ case SEEK_END:
+ pos = head->prev;
+ break;
+ default:
+ return;
+ }
+
+ if (offset > 0) {
+ while (offset-- != 0)
+ pos = pos->next;
+ } else {
+ while (offset++ != 0)
+ pos = pos->prev;
+ }
+
+ self->top = pos;
+}
+
+void ui_browser__rb_tree_seek(struct ui_browser *self, off_t offset, int whence)
+{
+ struct rb_root *root = self->entries;
+ struct rb_node *nd;
+
+ switch (whence) {
+ case SEEK_SET:
+ nd = rb_first(root);
+ break;
+ case SEEK_CUR:
+ nd = self->top;
+ break;
+ case SEEK_END:
+ nd = rb_last(root);
+ break;
+ default:
+ return;
+ }
+
+ if (offset > 0) {
+ while (offset-- != 0)
+ nd = rb_next(nd);
+ } else {
+ while (offset++ != 0)
+ nd = rb_prev(nd);
+ }
+
+ self->top = nd;
+}
+
+unsigned int ui_browser__rb_tree_refresh(struct ui_browser *self)
+{
+ struct rb_node *nd;
+ int row = 0;
+
+ if (self->top == NULL)
+ self->top = rb_first(self->entries);
+
+ nd = self->top;
+
+ while (nd != NULL) {
+ SLsmg_gotorc(self->y + row, self->x);
+ self->write(self, nd, row);
+ if (++row == self->height)
+ break;
+ nd = rb_next(nd);
+ }
+
+ return row;
+}
+
+bool ui_browser__is_current_entry(struct ui_browser *self, unsigned row)
+{
+ return self->top_idx + row == self->index;
+}
+
+void ui_browser__refresh_dimensions(struct ui_browser *self)
+{
+ int cols, rows;
+ newtGetScreenSize(&cols, &rows);
+
+ if (self->width > cols - 4)
+ self->width = cols - 4;
+ self->height = rows - 5;
+ if (self->height > self->nr_entries)
+ self->height = self->nr_entries;
+ self->y = (rows - self->height) / 2;
+ self->x = (cols - self->width) / 2;
+}
+
+void ui_browser__reset_index(struct ui_browser *self)
+{
+ self->index = self->top_idx = 0;
+ self->seek(self, 0, SEEK_SET);
+}
+
+int ui_browser__show(struct ui_browser *self, const char *title,
+ const char *helpline, ...)
+{
+ va_list ap;
+
+ if (self->form != NULL) {
+ newtFormDestroy(self->form);
+ newtPopWindow();
+ }
+ ui_browser__refresh_dimensions(self);
+ newtCenteredWindow(self->width, self->height, title);
+ self->form = newt_form__new();
+ if (self->form == NULL)
+ return -1;
+
+ self->sb = newtVerticalScrollbar(self->width, 0, self->height,
+ HE_COLORSET_NORMAL,
+ HE_COLORSET_SELECTED);
+ if (self->sb == NULL)
+ return -1;
+
+ newtFormAddHotKey(self->form, NEWT_KEY_UP);
+ newtFormAddHotKey(self->form, NEWT_KEY_DOWN);
+ newtFormAddHotKey(self->form, NEWT_KEY_PGUP);
+ newtFormAddHotKey(self->form, NEWT_KEY_PGDN);
+ newtFormAddHotKey(self->form, NEWT_KEY_HOME);
+ newtFormAddHotKey(self->form, NEWT_KEY_END);
+ newtFormAddHotKey(self->form, ' ');
+ newtFormAddComponent(self->form, self->sb);
+
+ va_start(ap, helpline);
+ ui_helpline__vpush(helpline, ap);
+ va_end(ap);
+ return 0;
+}
+
+void ui_browser__hide(struct ui_browser *self)
+{
+ newtFormDestroy(self->form);
+ newtPopWindow();
+ self->form = NULL;
+ ui_helpline__pop();
+}
+
+int ui_browser__refresh(struct ui_browser *self)
+{
+ int row;
+
+ newtScrollbarSet(self->sb, self->index, self->nr_entries - 1);
+ row = self->refresh(self);
+ SLsmg_set_color(HE_COLORSET_NORMAL);
+ SLsmg_fill_region(self->y + row, self->x,
+ self->height - row, self->width, ' ');
+
+ return 0;
+}
+
+int ui_browser__run(struct ui_browser *self, struct newtExitStruct *es)
+{
+ if (ui_browser__refresh(self) < 0)
+ return -1;
+
+ while (1) {
+ off_t offset;
+
+ newtFormRun(self->form, es);
+
+ if (es->reason != NEWT_EXIT_HOTKEY)
+ break;
+ if (is_exit_key(es->u.key))
+ return es->u.key;
+ switch (es->u.key) {
+ case NEWT_KEY_DOWN:
+ if (self->index == self->nr_entries - 1)
+ break;
+ ++self->index;
+ if (self->index == self->top_idx + self->height) {
+ ++self->top_idx;
+ self->seek(self, +1, SEEK_CUR);
+ }
+ break;
+ case NEWT_KEY_UP:
+ if (self->index == 0)
+ break;
+ --self->index;
+ if (self->index < self->top_idx) {
+ --self->top_idx;
+ self->seek(self, -1, SEEK_CUR);
+ }
+ break;
+ case NEWT_KEY_PGDN:
+ case ' ':
+ if (self->top_idx + self->height > self->nr_entries - 1)
+ break;
+
+ offset = self->height;
+ if (self->index + offset > self->nr_entries - 1)
+ offset = self->nr_entries - 1 - self->index;
+ self->index += offset;
+ self->top_idx += offset;
+ self->seek(self, +offset, SEEK_CUR);
+ break;
+ case NEWT_KEY_PGUP:
+ if (self->top_idx == 0)
+ break;
+
+ if (self->top_idx < self->height)
+ offset = self->top_idx;
+ else
+ offset = self->height;
+
+ self->index -= offset;
+ self->top_idx -= offset;
+ self->seek(self, -offset, SEEK_CUR);
+ break;
+ case NEWT_KEY_HOME:
+ ui_browser__reset_index(self);
+ break;
+ case NEWT_KEY_END:
+ offset = self->height - 1;
+ if (offset >= self->nr_entries)
+ offset = self->nr_entries - 1;
+
+ self->index = self->nr_entries - 1;
+ self->top_idx = self->index - offset;
+ self->seek(self, -offset, SEEK_END);
+ break;
+ default:
+ return es->u.key;
+ }
+ if (ui_browser__refresh(self) < 0)
+ return -1;
+ }
+ return 0;
+}
+
+unsigned int ui_browser__list_head_refresh(struct ui_browser *self)
+{
+ struct list_head *pos;
+ struct list_head *head = self->entries;
+ int row = 0;
+
+ if (self->top == NULL || self->top == self->entries)
+ self->top = head->next;
+
+ pos = self->top;
+
+ list_for_each_from(pos, head) {
+ SLsmg_gotorc(self->y + row, self->x);
+ self->write(self, pos, row);
+ if (++row == self->height)
+ break;
+ }
+
+ return row;
+}
+
+static struct newtPercentTreeColors {
+ const char *topColorFg, *topColorBg;
+ const char *mediumColorFg, *mediumColorBg;
+ const char *normalColorFg, *normalColorBg;
+ const char *selColorFg, *selColorBg;
+ const char *codeColorFg, *codeColorBg;
+} defaultPercentTreeColors = {
+ "red", "lightgray",
+ "green", "lightgray",
+ "black", "lightgray",
+ "lightgray", "magenta",
+ "blue", "lightgray",
+};
+
+void ui_browser__init(void)
+{
+ struct newtPercentTreeColors *c = &defaultPercentTreeColors;
+
+ sltt_set_color(HE_COLORSET_TOP, NULL, c->topColorFg, c->topColorBg);
+ sltt_set_color(HE_COLORSET_MEDIUM, NULL, c->mediumColorFg, c->mediumColorBg);
+ sltt_set_color(HE_COLORSET_NORMAL, NULL, c->normalColorFg, c->normalColorBg);
+ sltt_set_color(HE_COLORSET_SELECTED, NULL, c->selColorFg, c->selColorBg);
+ sltt_set_color(HE_COLORSET_CODE, NULL, c->codeColorFg, c->codeColorBg);
+}
--- /dev/null
+#ifndef _PERF_UI_BROWSER_H_
+#define _PERF_UI_BROWSER_H_ 1
+
+#include <stdbool.h>
+#include <newt.h>
+#include <sys/types.h>
+#include "../types.h"
+
+#define HE_COLORSET_TOP 50
+#define HE_COLORSET_MEDIUM 51
+#define HE_COLORSET_NORMAL 52
+#define HE_COLORSET_SELECTED 53
+#define HE_COLORSET_CODE 54
+
+struct ui_browser {
+ newtComponent form, sb;
+ u64 index, top_idx;
+ void *top, *entries;
+ u16 y, x, width, height;
+ void *priv;
+ unsigned int (*refresh)(struct ui_browser *self);
+ void (*write)(struct ui_browser *self, void *entry, int row);
+ void (*seek)(struct ui_browser *self, off_t offset, int whence);
+ u32 nr_entries;
+};
+
+
+int ui_browser__percent_color(double percent, bool current);
+bool ui_browser__is_current_entry(struct ui_browser *self, unsigned row);
+void ui_browser__refresh_dimensions(struct ui_browser *self);
+void ui_browser__reset_index(struct ui_browser *self);
+
+int ui_browser__show(struct ui_browser *self, const char *title,
+ const char *helpline, ...);
+void ui_browser__hide(struct ui_browser *self);
+int ui_browser__refresh(struct ui_browser *self);
+int ui_browser__run(struct ui_browser *self, struct newtExitStruct *es);
+
+void ui_browser__rb_tree_seek(struct ui_browser *self, off_t offset, int whence);
+unsigned int ui_browser__rb_tree_refresh(struct ui_browser *self);
+
+void ui_browser__list_head_seek(struct ui_browser *self, off_t offset, int whence);
+unsigned int ui_browser__list_head_refresh(struct ui_browser *self);
+
+void ui_browser__init(void);
+#endif /* _PERF_UI_BROWSER_H_ */
--- /dev/null
+#include "../browser.h"
+#include "../helpline.h"
+#include "../libslang.h"
+#include "../../hist.h"
+#include "../../sort.h"
+#include "../../symbol.h"
+
+static void ui__error_window(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ newtWinMessagev((char *)"Error", (char *)"Ok", (char *)fmt, ap);
+ va_end(ap);
+}
+
+struct annotate_browser {
+ struct ui_browser b;
+ struct rb_root entries;
+ struct rb_node *curr_hot;
+};
+
+struct objdump_line_rb_node {
+ struct rb_node rb_node;
+ double percent;
+ u32 idx;
+};
+
+static inline
+struct objdump_line_rb_node *objdump_line__rb(struct objdump_line *self)
+{
+ return (struct objdump_line_rb_node *)(self + 1);
+}
+
+static void annotate_browser__write(struct ui_browser *self, void *entry, int row)
+{
+ struct objdump_line *ol = rb_entry(entry, struct objdump_line, node);
+ bool current_entry = ui_browser__is_current_entry(self, row);
+ int width = self->width;
+
+ if (ol->offset != -1) {
+ struct objdump_line_rb_node *olrb = objdump_line__rb(ol);
+ int color = ui_browser__percent_color(olrb->percent, current_entry);
+ SLsmg_set_color(color);
+ slsmg_printf(" %7.2f ", olrb->percent);
+ if (!current_entry)
+ SLsmg_set_color(HE_COLORSET_CODE);
+ } else {
+ int color = ui_browser__percent_color(0, current_entry);
+ SLsmg_set_color(color);
+ slsmg_write_nstring(" ", 9);
+ }
+
+ SLsmg_write_char(':');
+ slsmg_write_nstring(" ", 8);
+ if (!*ol->line)
+ slsmg_write_nstring(" ", width - 18);
+ else
+ slsmg_write_nstring(ol->line, width - 18);
+}
+
+static double objdump_line__calc_percent(struct objdump_line *self,
+ struct list_head *head,
+ struct symbol *sym)
+{
+ double percent = 0.0;
+
+ if (self->offset != -1) {
+ int len = sym->end - sym->start;
+ unsigned int hits = 0;
+ struct sym_priv *priv = symbol__priv(sym);
+ struct sym_ext *sym_ext = priv->ext;
+ struct sym_hist *h = priv->hist;
+ s64 offset = self->offset;
+ struct objdump_line *next = objdump__get_next_ip_line(head, self);
+
+
+ while (offset < (s64)len &&
+ (next == NULL || offset < next->offset)) {
+ if (sym_ext) {
+ percent += sym_ext[offset].percent;
+ } else
+ hits += h->ip[offset];
+
+ ++offset;
+ }
+
+ if (sym_ext == NULL && h->sum)
+ percent = 100.0 * hits / h->sum;
+ }
+
+ return percent;
+}
+
+static void objdump__insert_line(struct rb_root *self,
+ struct objdump_line_rb_node *line)
+{
+ struct rb_node **p = &self->rb_node;
+ struct rb_node *parent = NULL;
+ struct objdump_line_rb_node *l;
+
+ while (*p != NULL) {
+ parent = *p;
+ l = rb_entry(parent, struct objdump_line_rb_node, rb_node);
+ if (line->percent < l->percent)
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ }
+ rb_link_node(&line->rb_node, parent, p);
+ rb_insert_color(&line->rb_node, self);
+}
+
+static void annotate_browser__set_top(struct annotate_browser *self,
+ struct rb_node *nd)
+{
+ struct objdump_line_rb_node *rbpos;
+ struct objdump_line *pos;
+ unsigned back;
+
+ ui_browser__refresh_dimensions(&self->b);
+ back = self->b.height / 2;
+ rbpos = rb_entry(nd, struct objdump_line_rb_node, rb_node);
+ pos = ((struct objdump_line *)rbpos) - 1;
+ self->b.top_idx = self->b.index = rbpos->idx;
+
+ while (self->b.top_idx != 0 && back != 0) {
+ pos = list_entry(pos->node.prev, struct objdump_line, node);
+
+ --self->b.top_idx;
+ --back;
+ }
+
+ self->b.top = pos;
+ self->curr_hot = nd;
+}
+
+static int annotate_browser__run(struct annotate_browser *self,
+ struct newtExitStruct *es)
+{
+ struct rb_node *nd;
+ struct hist_entry *he = self->b.priv;
+
+ if (ui_browser__show(&self->b, he->ms.sym->name,
+ "<- or ESC: exit, TAB/shift+TAB: cycle thru samples") < 0)
+ return -1;
+
+ newtFormAddHotKey(self->b.form, NEWT_KEY_LEFT);
+ newtFormAddHotKey(self->b.form, NEWT_KEY_RIGHT);
+
+ nd = self->curr_hot;
+ if (nd) {
+ newtFormAddHotKey(self->b.form, NEWT_KEY_TAB);
+ newtFormAddHotKey(self->b.form, NEWT_KEY_UNTAB);
+ }
+
+ while (1) {
+ ui_browser__run(&self->b, es);
+
+ if (es->reason != NEWT_EXIT_HOTKEY)
+ break;
+
+ switch (es->u.key) {
+ case NEWT_KEY_TAB:
+ nd = rb_prev(nd);
+ if (nd == NULL)
+ nd = rb_last(&self->entries);
+ annotate_browser__set_top(self, nd);
+ break;
+ case NEWT_KEY_UNTAB:
+ nd = rb_next(nd);
+ if (nd == NULL)
+ nd = rb_first(&self->entries);
+ annotate_browser__set_top(self, nd);
+ break;
+ default:
+ goto out;
+ }
+ }
+out:
+ ui_browser__hide(&self->b);
+ return es->u.key;
+}
+
+int hist_entry__tui_annotate(struct hist_entry *self)
+{
+ struct newtExitStruct es;
+ struct objdump_line *pos, *n;
+ struct objdump_line_rb_node *rbpos;
+ LIST_HEAD(head);
+ struct annotate_browser browser = {
+ .b = {
+ .entries = &head,
+ .refresh = ui_browser__list_head_refresh,
+ .seek = ui_browser__list_head_seek,
+ .write = annotate_browser__write,
+ .priv = self,
+ },
+ };
+ int ret;
+
+ if (self->ms.sym == NULL)
+ return -1;
+
+ if (self->ms.map->dso->annotate_warned)
+ return -1;
+
+ if (hist_entry__annotate(self, &head, sizeof(*rbpos)) < 0) {
+ ui__error_window(ui_helpline__last_msg);
+ return -1;
+ }
+
+ ui_helpline__push("Press <- or ESC to exit");
+
+ list_for_each_entry(pos, &head, node) {
+ size_t line_len = strlen(pos->line);
+ if (browser.b.width < line_len)
+ browser.b.width = line_len;
+ rbpos = objdump_line__rb(pos);
+ rbpos->idx = browser.b.nr_entries++;
+ rbpos->percent = objdump_line__calc_percent(pos, &head, self->ms.sym);
+ if (rbpos->percent < 0.01)
+ continue;
+ objdump__insert_line(&browser.entries, rbpos);
+ }
+
+ /*
+ * Position the browser at the hottest line.
+ */
+ browser.curr_hot = rb_last(&browser.entries);
+ if (browser.curr_hot)
+ annotate_browser__set_top(&browser, browser.curr_hot);
+
+ browser.b.width += 18; /* Percentage */
+ ret = annotate_browser__run(&browser, &es);
+ list_for_each_entry_safe(pos, n, &head, node) {
+ list_del(&pos->node);
+ objdump_line__free(pos);
+ }
+ return ret;
+}
--- /dev/null
+#define _GNU_SOURCE
+#include <stdio.h>
+#undef _GNU_SOURCE
+#include "../libslang.h"
+#include <stdlib.h>
+#include <string.h>
+#include <newt.h>
+#include <linux/rbtree.h>
+
+#include "../../hist.h"
+#include "../../pstack.h"
+#include "../../sort.h"
+#include "../../util.h"
+
+#include "../browser.h"
+#include "../helpline.h"
+#include "../util.h"
+#include "map.h"
+
+struct hist_browser {
+ struct ui_browser b;
+ struct hists *hists;
+ struct hist_entry *he_selection;
+ struct map_symbol *selection;
+};
+
+static void hist_browser__refresh_dimensions(struct hist_browser *self)
+{
+ /* 3 == +/- toggle symbol before actual hist_entry rendering */
+ self->b.width = 3 + (hists__sort_list_width(self->hists) +
+ sizeof("[k]"));
+}
+
+static void hist_browser__reset(struct hist_browser *self)
+{
+ self->b.nr_entries = self->hists->nr_entries;
+ hist_browser__refresh_dimensions(self);
+ ui_browser__reset_index(&self->b);
+}
+
+static char tree__folded_sign(bool unfolded)
+{
+ return unfolded ? '-' : '+';
+}
+
+static char map_symbol__folded(const struct map_symbol *self)
+{
+ return self->has_children ? tree__folded_sign(self->unfolded) : ' ';
+}
+
+static char hist_entry__folded(const struct hist_entry *self)
+{
+ return map_symbol__folded(&self->ms);
+}
+
+static char callchain_list__folded(const struct callchain_list *self)
+{
+ return map_symbol__folded(&self->ms);
+}
+
+static int callchain_node__count_rows_rb_tree(struct callchain_node *self)
+{
+ int n = 0;
+ struct rb_node *nd;
+
+ for (nd = rb_first(&self->rb_root); nd; nd = rb_next(nd)) {
+ struct callchain_node *child = rb_entry(nd, struct callchain_node, rb_node);
+ struct callchain_list *chain;
+ char folded_sign = ' '; /* No children */
+
+ list_for_each_entry(chain, &child->val, list) {
+ ++n;
+ /* We need this because we may not have children */
+ folded_sign = callchain_list__folded(chain);
+ if (folded_sign == '+')
+ break;
+ }
+
+ if (folded_sign == '-') /* Have children and they're unfolded */
+ n += callchain_node__count_rows_rb_tree(child);
+ }
+
+ return n;
+}
+
+static int callchain_node__count_rows(struct callchain_node *node)
+{
+ struct callchain_list *chain;
+ bool unfolded = false;
+ int n = 0;
+
+ list_for_each_entry(chain, &node->val, list) {
+ ++n;
+ unfolded = chain->ms.unfolded;
+ }
+
+ if (unfolded)
+ n += callchain_node__count_rows_rb_tree(node);
+
+ return n;
+}
+
+static int callchain__count_rows(struct rb_root *chain)
+{
+ struct rb_node *nd;
+ int n = 0;
+
+ for (nd = rb_first(chain); nd; nd = rb_next(nd)) {
+ struct callchain_node *node = rb_entry(nd, struct callchain_node, rb_node);
+ n += callchain_node__count_rows(node);
+ }
+
+ return n;
+}
+
+static bool map_symbol__toggle_fold(struct map_symbol *self)
+{
+ if (!self->has_children)
+ return false;
+
+ self->unfolded = !self->unfolded;
+ return true;
+}
+
+static void callchain_node__init_have_children_rb_tree(struct callchain_node *self)
+{
+ struct rb_node *nd = rb_first(&self->rb_root);
+
+ for (nd = rb_first(&self->rb_root); nd; nd = rb_next(nd)) {
+ struct callchain_node *child = rb_entry(nd, struct callchain_node, rb_node);
+ struct callchain_list *chain;
+ int first = true;
+
+ list_for_each_entry(chain, &child->val, list) {
+ if (first) {
+ first = false;
+ chain->ms.has_children = chain->list.next != &child->val ||
+ rb_first(&child->rb_root) != NULL;
+ } else
+ chain->ms.has_children = chain->list.next == &child->val &&
+ rb_first(&child->rb_root) != NULL;
+ }
+
+ callchain_node__init_have_children_rb_tree(child);
+ }
+}
+
+static void callchain_node__init_have_children(struct callchain_node *self)
+{
+ struct callchain_list *chain;
+
+ list_for_each_entry(chain, &self->val, list)
+ chain->ms.has_children = rb_first(&self->rb_root) != NULL;
+
+ callchain_node__init_have_children_rb_tree(self);
+}
+
+static void callchain__init_have_children(struct rb_root *self)
+{
+ struct rb_node *nd;
+
+ for (nd = rb_first(self); nd; nd = rb_next(nd)) {
+ struct callchain_node *node = rb_entry(nd, struct callchain_node, rb_node);
+ callchain_node__init_have_children(node);
+ }
+}
+
+static void hist_entry__init_have_children(struct hist_entry *self)
+{
+ if (!self->init_have_children) {
+ callchain__init_have_children(&self->sorted_chain);
+ self->init_have_children = true;
+ }
+}
+
+static bool hist_browser__toggle_fold(struct hist_browser *self)
+{
+ if (map_symbol__toggle_fold(self->selection)) {
+ struct hist_entry *he = self->he_selection;
+
+ hist_entry__init_have_children(he);
+ self->hists->nr_entries -= he->nr_rows;
+
+ if (he->ms.unfolded)
+ he->nr_rows = callchain__count_rows(&he->sorted_chain);
+ else
+ he->nr_rows = 0;
+ self->hists->nr_entries += he->nr_rows;
+ self->b.nr_entries = self->hists->nr_entries;
+
+ return true;
+ }
+
+ /* If it doesn't have children, no toggling performed */
+ return false;
+}
+
+static int hist_browser__run(struct hist_browser *self, const char *title,
+ struct newtExitStruct *es)
+{
+ char str[256], unit;
+ unsigned long nr_events = self->hists->stats.nr_events[PERF_RECORD_SAMPLE];
+
+ self->b.entries = &self->hists->entries;
+ self->b.nr_entries = self->hists->nr_entries;
+
+ hist_browser__refresh_dimensions(self);
+
+ nr_events = convert_unit(nr_events, &unit);
+ snprintf(str, sizeof(str), "Events: %lu%c ",
+ nr_events, unit);
+ newtDrawRootText(0, 0, str);
+
+ if (ui_browser__show(&self->b, title,
+ "Press '?' for help on key bindings") < 0)
+ return -1;
+
+ newtFormAddHotKey(self->b.form, 'a');
+ newtFormAddHotKey(self->b.form, '?');
+ newtFormAddHotKey(self->b.form, 'h');
+ newtFormAddHotKey(self->b.form, 'd');
+ newtFormAddHotKey(self->b.form, 'D');
+ newtFormAddHotKey(self->b.form, 't');
+
+ newtFormAddHotKey(self->b.form, NEWT_KEY_LEFT);
+ newtFormAddHotKey(self->b.form, NEWT_KEY_RIGHT);
+ newtFormAddHotKey(self->b.form, NEWT_KEY_ENTER);
+
+ while (1) {
+ ui_browser__run(&self->b, es);
+
+ if (es->reason != NEWT_EXIT_HOTKEY)
+ break;
+ switch (es->u.key) {
+ case 'D': { /* Debug */
+ static int seq;
+ struct hist_entry *h = rb_entry(self->b.top,
+ struct hist_entry, rb_node);
+ ui_helpline__pop();
+ ui_helpline__fpush("%d: nr_ent=(%d,%d), height=%d, idx=%d, fve: idx=%d, row_off=%d, nrows=%d",
+ seq++, self->b.nr_entries,
+ self->hists->nr_entries,
+ self->b.height,
+ self->b.index,
+ self->b.top_idx,
+ h->row_offset, h->nr_rows);
+ }
+ continue;
+ case NEWT_KEY_ENTER:
+ if (hist_browser__toggle_fold(self))
+ break;
+ /* fall thru */
+ default:
+ return 0;
+ }
+ }
+
+ ui_browser__hide(&self->b);
+ return 0;
+}
+
+static char *callchain_list__sym_name(struct callchain_list *self,
+ char *bf, size_t bfsize)
+{
+ if (self->ms.sym)
+ return self->ms.sym->name;
+
+ snprintf(bf, bfsize, "%#Lx", self->ip);
+ return bf;
+}
+
+#define LEVEL_OFFSET_STEP 3
+
+static int hist_browser__show_callchain_node_rb_tree(struct hist_browser *self,
+ struct callchain_node *chain_node,
+ u64 total, int level,
+ unsigned short row,
+ off_t *row_offset,
+ bool *is_current_entry)
+{
+ struct rb_node *node;
+ int first_row = row, width, offset = level * LEVEL_OFFSET_STEP;
+ u64 new_total, remaining;
+
+ if (callchain_param.mode == CHAIN_GRAPH_REL)
+ new_total = chain_node->children_hit;
+ else
+ new_total = total;
+
+ remaining = new_total;
+ node = rb_first(&chain_node->rb_root);
+ while (node) {
+ struct callchain_node *child = rb_entry(node, struct callchain_node, rb_node);
+ struct rb_node *next = rb_next(node);
+ u64 cumul = cumul_hits(child);
+ struct callchain_list *chain;
+ char folded_sign = ' ';
+ int first = true;
+ int extra_offset = 0;
+
+ remaining -= cumul;
+
+ list_for_each_entry(chain, &child->val, list) {
+ char ipstr[BITS_PER_LONG / 4 + 1], *alloc_str;
+ const char *str;
+ int color;
+ bool was_first = first;
+
+ if (first) {
+ first = false;
+ chain->ms.has_children = chain->list.next != &child->val ||
+ rb_first(&child->rb_root) != NULL;
+ } else {
+ extra_offset = LEVEL_OFFSET_STEP;
+ chain->ms.has_children = chain->list.next == &child->val &&
+ rb_first(&child->rb_root) != NULL;
+ }
+
+ folded_sign = callchain_list__folded(chain);
+ if (*row_offset != 0) {
+ --*row_offset;
+ goto do_next;
+ }
+
+ alloc_str = NULL;
+ str = callchain_list__sym_name(chain, ipstr, sizeof(ipstr));
+ if (was_first) {
+ double percent = cumul * 100.0 / new_total;
+
+ if (asprintf(&alloc_str, "%2.2f%% %s", percent, str) < 0)
+ str = "Not enough memory!";
+ else
+ str = alloc_str;
+ }
+
+ color = HE_COLORSET_NORMAL;
+ width = self->b.width - (offset + extra_offset + 2);
+ if (ui_browser__is_current_entry(&self->b, row)) {
+ self->selection = &chain->ms;
+ color = HE_COLORSET_SELECTED;
+ *is_current_entry = true;
+ }
+
+ SLsmg_set_color(color);
+ SLsmg_gotorc(self->b.y + row, self->b.x);
+ slsmg_write_nstring(" ", offset + extra_offset);
+ slsmg_printf("%c ", folded_sign);
+ slsmg_write_nstring(str, width);
+ free(alloc_str);
+
+ if (++row == self->b.height)
+ goto out;
+do_next:
+ if (folded_sign == '+')
+ break;
+ }
+
+ if (folded_sign == '-') {
+ const int new_level = level + (extra_offset ? 2 : 1);
+ row += hist_browser__show_callchain_node_rb_tree(self, child, new_total,
+ new_level, row, row_offset,
+ is_current_entry);
+ }
+ if (row == self->b.height)
+ goto out;
+ node = next;
+ }
+out:
+ return row - first_row;
+}
+
+static int hist_browser__show_callchain_node(struct hist_browser *self,
+ struct callchain_node *node,
+ int level, unsigned short row,
+ off_t *row_offset,
+ bool *is_current_entry)
+{
+ struct callchain_list *chain;
+ int first_row = row,
+ offset = level * LEVEL_OFFSET_STEP,
+ width = self->b.width - offset;
+ char folded_sign = ' ';
+
+ list_for_each_entry(chain, &node->val, list) {
+ char ipstr[BITS_PER_LONG / 4 + 1], *s;
+ int color;
+ /*
+ * FIXME: This should be moved to somewhere else,
+ * probably when the callchain is created, so as not to
+ * traverse it all over again
+ */
+ chain->ms.has_children = rb_first(&node->rb_root) != NULL;
+ folded_sign = callchain_list__folded(chain);
+
+ if (*row_offset != 0) {
+ --*row_offset;
+ continue;
+ }
+
+ color = HE_COLORSET_NORMAL;
+ if (ui_browser__is_current_entry(&self->b, row)) {
+ self->selection = &chain->ms;
+ color = HE_COLORSET_SELECTED;
+ *is_current_entry = true;
+ }
+
+ s = callchain_list__sym_name(chain, ipstr, sizeof(ipstr));
+ SLsmg_gotorc(self->b.y + row, self->b.x);
+ SLsmg_set_color(color);
+ slsmg_write_nstring(" ", offset);
+ slsmg_printf("%c ", folded_sign);
+ slsmg_write_nstring(s, width - 2);
+
+ if (++row == self->b.height)
+ goto out;
+ }
+
+ if (folded_sign == '-')
+ row += hist_browser__show_callchain_node_rb_tree(self, node,
+ self->hists->stats.total_period,
+ level + 1, row,
+ row_offset,
+ is_current_entry);
+out:
+ return row - first_row;
+}
+
+static int hist_browser__show_callchain(struct hist_browser *self,
+ struct rb_root *chain,
+ int level, unsigned short row,
+ off_t *row_offset,
+ bool *is_current_entry)
+{
+ struct rb_node *nd;
+ int first_row = row;
+
+ for (nd = rb_first(chain); nd; nd = rb_next(nd)) {
+ struct callchain_node *node = rb_entry(nd, struct callchain_node, rb_node);
+
+ row += hist_browser__show_callchain_node(self, node, level,
+ row, row_offset,
+ is_current_entry);
+ if (row == self->b.height)
+ break;
+ }
+
+ return row - first_row;
+}
+
+static int hist_browser__show_entry(struct hist_browser *self,
+ struct hist_entry *entry,
+ unsigned short row)
+{
+ char s[256];
+ double percent;
+ int printed = 0;
+ int color, width = self->b.width;
+ char folded_sign = ' ';
+ bool current_entry = ui_browser__is_current_entry(&self->b, row);
+ off_t row_offset = entry->row_offset;
+
+ if (current_entry) {
+ self->he_selection = entry;
+ self->selection = &entry->ms;
+ }
+
+ if (symbol_conf.use_callchain) {
+ entry->ms.has_children = !RB_EMPTY_ROOT(&entry->sorted_chain);
+ folded_sign = hist_entry__folded(entry);
+ }
+
+ if (row_offset == 0) {
+ hist_entry__snprintf(entry, s, sizeof(s), self->hists, NULL, false,
+ 0, false, self->hists->stats.total_period);
+ percent = (entry->period * 100.0) / self->hists->stats.total_period;
+
+ color = HE_COLORSET_SELECTED;
+ if (!current_entry) {
+ if (percent >= MIN_RED)
+ color = HE_COLORSET_TOP;
+ else if (percent >= MIN_GREEN)
+ color = HE_COLORSET_MEDIUM;
+ else
+ color = HE_COLORSET_NORMAL;
+ }
+
+ SLsmg_set_color(color);
+ SLsmg_gotorc(self->b.y + row, self->b.x);
+ if (symbol_conf.use_callchain) {
+ slsmg_printf("%c ", folded_sign);
+ width -= 2;
+ }
+ slsmg_write_nstring(s, width);
+ ++row;
+ ++printed;
+ } else
+ --row_offset;
+
+ if (folded_sign == '-' && row != self->b.height) {
+ printed += hist_browser__show_callchain(self, &entry->sorted_chain,
+ 1, row, &row_offset,
+ ¤t_entry);
+ if (current_entry)
+ self->he_selection = entry;
+ }
+
+ return printed;
+}
+
+static unsigned int hist_browser__refresh(struct ui_browser *self)
+{
+ unsigned row = 0;
+ struct rb_node *nd;
+ struct hist_browser *hb = container_of(self, struct hist_browser, b);
+
+ if (self->top == NULL)
+ self->top = rb_first(&hb->hists->entries);
+
+ for (nd = self->top; nd; nd = rb_next(nd)) {
+ struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+
+ if (h->filtered)
+ continue;
+
+ row += hist_browser__show_entry(hb, h, row);
+ if (row == self->height)
+ break;
+ }
+
+ return row;
+}
+
+static struct rb_node *hists__filter_entries(struct rb_node *nd)
+{
+ while (nd != NULL) {
+ struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+ if (!h->filtered)
+ return nd;
+
+ nd = rb_next(nd);
+ }
+
+ return NULL;
+}
+
+static struct rb_node *hists__filter_prev_entries(struct rb_node *nd)
+{
+ while (nd != NULL) {
+ struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+ if (!h->filtered)
+ return nd;
+
+ nd = rb_prev(nd);
+ }
+
+ return NULL;
+}
+
+static void ui_browser__hists_seek(struct ui_browser *self,
+ off_t offset, int whence)
+{
+ struct hist_entry *h;
+ struct rb_node *nd;
+ bool first = true;
+
+ switch (whence) {
+ case SEEK_SET:
+ nd = hists__filter_entries(rb_first(self->entries));
+ break;
+ case SEEK_CUR:
+ nd = self->top;
+ goto do_offset;
+ case SEEK_END:
+ nd = hists__filter_prev_entries(rb_last(self->entries));
+ first = false;
+ break;
+ default:
+ return;
+ }
+
+ /*
+ * Moves not relative to the first visible entry invalidates its
+ * row_offset:
+ */
+ h = rb_entry(self->top, struct hist_entry, rb_node);
+ h->row_offset = 0;
+
+ /*
+ * Here we have to check if nd is expanded (+), if it is we can't go
+ * the next top level hist_entry, instead we must compute an offset of
+ * what _not_ to show and not change the first visible entry.
+ *
+ * This offset increments when we are going from top to bottom and
+ * decreases when we're going from bottom to top.
+ *
+ * As we don't have backpointers to the top level in the callchains
+ * structure, we need to always print the whole hist_entry callchain,
+ * skipping the first ones that are before the first visible entry
+ * and stop when we printed enough lines to fill the screen.
+ */
+do_offset:
+ if (offset > 0) {
+ do {
+ h = rb_entry(nd, struct hist_entry, rb_node);
+ if (h->ms.unfolded) {
+ u16 remaining = h->nr_rows - h->row_offset;
+ if (offset > remaining) {
+ offset -= remaining;
+ h->row_offset = 0;
+ } else {
+ h->row_offset += offset;
+ offset = 0;
+ self->top = nd;
+ break;
+ }
+ }
+ nd = hists__filter_entries(rb_next(nd));
+ if (nd == NULL)
+ break;
+ --offset;
+ self->top = nd;
+ } while (offset != 0);
+ } else if (offset < 0) {
+ while (1) {
+ h = rb_entry(nd, struct hist_entry, rb_node);
+ if (h->ms.unfolded) {
+ if (first) {
+ if (-offset > h->row_offset) {
+ offset += h->row_offset;
+ h->row_offset = 0;
+ } else {
+ h->row_offset += offset;
+ offset = 0;
+ self->top = nd;
+ break;
+ }
+ } else {
+ if (-offset > h->nr_rows) {
+ offset += h->nr_rows;
+ h->row_offset = 0;
+ } else {
+ h->row_offset = h->nr_rows + offset;
+ offset = 0;
+ self->top = nd;
+ break;
+ }
+ }
+ }
+
+ nd = hists__filter_prev_entries(rb_prev(nd));
+ if (nd == NULL)
+ break;
+ ++offset;
+ self->top = nd;
+ if (offset == 0) {
+ /*
+ * Last unfiltered hist_entry, check if it is
+ * unfolded, if it is then we should have
+ * row_offset at its last entry.
+ */
+ h = rb_entry(nd, struct hist_entry, rb_node);
+ if (h->ms.unfolded)
+ h->row_offset = h->nr_rows;
+ break;
+ }
+ first = false;
+ }
+ } else {
+ self->top = nd;
+ h = rb_entry(nd, struct hist_entry, rb_node);
+ h->row_offset = 0;
+ }
+}
+
+static struct hist_browser *hist_browser__new(struct hists *hists)
+{
+ struct hist_browser *self = zalloc(sizeof(*self));
+
+ if (self) {
+ self->hists = hists;
+ self->b.refresh = hist_browser__refresh;
+ self->b.seek = ui_browser__hists_seek;
+ }
+
+ return self;
+}
+
+static void hist_browser__delete(struct hist_browser *self)
+{
+ newtFormDestroy(self->b.form);
+ newtPopWindow();
+ free(self);
+}
+
+static struct hist_entry *hist_browser__selected_entry(struct hist_browser *self)
+{
+ return self->he_selection;
+}
+
+static struct thread *hist_browser__selected_thread(struct hist_browser *self)
+{
+ return self->he_selection->thread;
+}
+
+static int hist_browser__title(char *bf, size_t size, const char *ev_name,
+ const struct dso *dso, const struct thread *thread)
+{
+ int printed = 0;
+
+ if (thread)
+ printed += snprintf(bf + printed, size - printed,
+ "Thread: %s(%d)",
+ (thread->comm_set ? thread->comm : ""),
+ thread->pid);
+ if (dso)
+ printed += snprintf(bf + printed, size - printed,
+ "%sDSO: %s", thread ? " " : "",
+ dso->short_name);
+ return printed ?: snprintf(bf, size, "Event: %s", ev_name);
+}
+
+int hists__browse(struct hists *self, const char *helpline, const char *ev_name)
+{
+ struct hist_browser *browser = hist_browser__new(self);
+ struct pstack *fstack;
+ const struct thread *thread_filter = NULL;
+ const struct dso *dso_filter = NULL;
+ struct newtExitStruct es;
+ char msg[160];
+ int key = -1;
+
+ if (browser == NULL)
+ return -1;
+
+ fstack = pstack__new(2);
+ if (fstack == NULL)
+ goto out;
+
+ ui_helpline__push(helpline);
+
+ hist_browser__title(msg, sizeof(msg), ev_name,
+ dso_filter, thread_filter);
+
+ while (1) {
+ const struct thread *thread;
+ const struct dso *dso;
+ char *options[16];
+ int nr_options = 0, choice = 0, i,
+ annotate = -2, zoom_dso = -2, zoom_thread = -2,
+ browse_map = -2;
+
+ if (hist_browser__run(browser, msg, &es))
+ break;
+
+ thread = hist_browser__selected_thread(browser);
+ dso = browser->selection->map ? browser->selection->map->dso : NULL;
+
+ if (es.reason == NEWT_EXIT_HOTKEY) {
+ key = es.u.key;
+
+ switch (key) {
+ case NEWT_KEY_F1:
+ goto do_help;
+ case NEWT_KEY_TAB:
+ case NEWT_KEY_UNTAB:
+ /*
+ * Exit the browser, let hists__browser_tree
+ * go to the next or previous
+ */
+ goto out_free_stack;
+ default:;
+ }
+
+ switch (key) {
+ case 'a':
+ if (browser->selection->map == NULL &&
+ browser->selection->map->dso->annotate_warned)
+ continue;
+ goto do_annotate;
+ case 'd':
+ goto zoom_dso;
+ case 't':
+ goto zoom_thread;
+ case 'h':
+ case '?':
+do_help:
+ ui__help_window("-> Zoom into DSO/Threads & Annotate current symbol\n"
+ "<- Zoom out\n"
+ "a Annotate current symbol\n"
+ "h/?/F1 Show this window\n"
+ "d Zoom into current DSO\n"
+ "t Zoom into current Thread\n"
+ "q/CTRL+C Exit browser");
+ continue;
+ default:;
+ }
+ if (is_exit_key(key)) {
+ if (key == NEWT_KEY_ESCAPE &&
+ !ui__dialog_yesno("Do you really want to exit?"))
+ continue;
+ break;
+ }
+
+ if (es.u.key == NEWT_KEY_LEFT) {
+ const void *top;
+
+ if (pstack__empty(fstack))
+ continue;
+ top = pstack__pop(fstack);
+ if (top == &dso_filter)
+ goto zoom_out_dso;
+ if (top == &thread_filter)
+ goto zoom_out_thread;
+ continue;
+ }
+ }
+
+ if (browser->selection->sym != NULL &&
+ !browser->selection->map->dso->annotate_warned &&
+ asprintf(&options[nr_options], "Annotate %s",
+ browser->selection->sym->name) > 0)
+ annotate = nr_options++;
+
+ if (thread != NULL &&
+ asprintf(&options[nr_options], "Zoom %s %s(%d) thread",
+ (thread_filter ? "out of" : "into"),
+ (thread->comm_set ? thread->comm : ""),
+ thread->pid) > 0)
+ zoom_thread = nr_options++;
+
+ if (dso != NULL &&
+ asprintf(&options[nr_options], "Zoom %s %s DSO",
+ (dso_filter ? "out of" : "into"),
+ (dso->kernel ? "the Kernel" : dso->short_name)) > 0)
+ zoom_dso = nr_options++;
+
+ if (browser->selection->map != NULL &&
+ asprintf(&options[nr_options], "Browse map details") > 0)
+ browse_map = nr_options++;
+
+ options[nr_options++] = (char *)"Exit";
+
+ choice = ui__popup_menu(nr_options, options);
+
+ for (i = 0; i < nr_options - 1; ++i)
+ free(options[i]);
+
+ if (choice == nr_options - 1)
+ break;
+
+ if (choice == -1)
+ continue;
+
+ if (choice == annotate) {
+ struct hist_entry *he;
+do_annotate:
+ if (browser->selection->map->dso->origin == DSO__ORIG_KERNEL) {
+ browser->selection->map->dso->annotate_warned = 1;
+ ui_helpline__puts("No vmlinux file found, can't "
+ "annotate with just a "
+ "kallsyms file");
+ continue;
+ }
+
+ he = hist_browser__selected_entry(browser);
+ if (he == NULL)
+ continue;
+
+ hist_entry__tui_annotate(he);
+ } else if (choice == browse_map)
+ map__browse(browser->selection->map);
+ else if (choice == zoom_dso) {
+zoom_dso:
+ if (dso_filter) {
+ pstack__remove(fstack, &dso_filter);
+zoom_out_dso:
+ ui_helpline__pop();
+ dso_filter = NULL;
+ } else {
+ if (dso == NULL)
+ continue;
+ ui_helpline__fpush("To zoom out press <- or -> + \"Zoom out of %s DSO\"",
+ dso->kernel ? "the Kernel" : dso->short_name);
+ dso_filter = dso;
+ pstack__push(fstack, &dso_filter);
+ }
+ hists__filter_by_dso(self, dso_filter);
+ hist_browser__title(msg, sizeof(msg), ev_name,
+ dso_filter, thread_filter);
+ hist_browser__reset(browser);
+ } else if (choice == zoom_thread) {
+zoom_thread:
+ if (thread_filter) {
+ pstack__remove(fstack, &thread_filter);
+zoom_out_thread:
+ ui_helpline__pop();
+ thread_filter = NULL;
+ } else {
+ ui_helpline__fpush("To zoom out press <- or -> + \"Zoom out of %s(%d) thread\"",
+ thread->comm_set ? thread->comm : "",
+ thread->pid);
+ thread_filter = thread;
+ pstack__push(fstack, &thread_filter);
+ }
+ hists__filter_by_thread(self, thread_filter);
+ hist_browser__title(msg, sizeof(msg), ev_name,
+ dso_filter, thread_filter);
+ hist_browser__reset(browser);
+ }
+ }
+out_free_stack:
+ pstack__delete(fstack);
+out:
+ hist_browser__delete(browser);
+ return key;
+}
+
+int hists__tui_browse_tree(struct rb_root *self, const char *help)
+{
+ struct rb_node *first = rb_first(self), *nd = first, *next;
+ int key = 0;
+
+ while (nd) {
+ struct hists *hists = rb_entry(nd, struct hists, rb_node);
+ const char *ev_name = __event_name(hists->type, hists->config);
+
+ key = hists__browse(hists, help, ev_name);
+
+ if (is_exit_key(key))
+ break;
+
+ switch (key) {
+ case NEWT_KEY_TAB:
+ next = rb_next(nd);
+ if (next)
+ nd = next;
+ break;
+ case NEWT_KEY_UNTAB:
+ if (nd == first)
+ continue;
+ nd = rb_prev(nd);
+ default:
+ break;
+ }
+ }
+
+ return key;
+}
--- /dev/null
+#include "../libslang.h"
+#include <elf.h>
+#include <newt.h>
+#include <sys/ttydefaults.h>
+#include <ctype.h>
+#include <string.h>
+#include <linux/bitops.h>
+#include "../../debug.h"
+#include "../../symbol.h"
+#include "../browser.h"
+#include "../helpline.h"
+#include "map.h"
+
+static int ui_entry__read(const char *title, char *bf, size_t size, int width)
+{
+ struct newtExitStruct es;
+ newtComponent form, entry;
+ const char *result;
+ int err = -1;
+
+ newtCenteredWindow(width, 1, title);
+ form = newtForm(NULL, NULL, 0);
+ if (form == NULL)
+ return -1;
+
+ entry = newtEntry(0, 0, "0x", width, &result, NEWT_FLAG_SCROLL);
+ if (entry == NULL)
+ goto out_free_form;
+
+ newtFormAddComponent(form, entry);
+ newtFormAddHotKey(form, NEWT_KEY_ENTER);
+ newtFormAddHotKey(form, NEWT_KEY_ESCAPE);
+ newtFormAddHotKey(form, NEWT_KEY_LEFT);
+ newtFormAddHotKey(form, CTRL('c'));
+ newtFormRun(form, &es);
+
+ if (result != NULL) {
+ strncpy(bf, result, size);
+ err = 0;
+ }
+out_free_form:
+ newtPopWindow();
+ newtFormDestroy(form);
+ return 0;
+}
+
+struct map_browser {
+ struct ui_browser b;
+ struct map *map;
+ u16 namelen;
+ u8 addrlen;
+};
+
+static void map_browser__write(struct ui_browser *self, void *nd, int row)
+{
+ struct symbol *sym = rb_entry(nd, struct symbol, rb_node);
+ struct map_browser *mb = container_of(self, struct map_browser, b);
+ bool current_entry = ui_browser__is_current_entry(self, row);
+ int color = ui_browser__percent_color(0, current_entry);
+
+ SLsmg_set_color(color);
+ slsmg_printf("%*llx %*llx %c ",
+ mb->addrlen, sym->start, mb->addrlen, sym->end,
+ sym->binding == STB_GLOBAL ? 'g' :
+ sym->binding == STB_LOCAL ? 'l' : 'w');
+ slsmg_write_nstring(sym->name, mb->namelen);
+}
+
+/* FIXME uber-kludgy, see comment on cmd_report... */
+static u32 *symbol__browser_index(struct symbol *self)
+{
+ return ((void *)self) - sizeof(struct rb_node) - sizeof(u32);
+}
+
+static int map_browser__search(struct map_browser *self)
+{
+ char target[512];
+ struct symbol *sym;
+ int err = ui_entry__read("Search by name/addr", target, sizeof(target), 40);
+
+ if (err)
+ return err;
+
+ if (target[0] == '0' && tolower(target[1]) == 'x') {
+ u64 addr = strtoull(target, NULL, 16);
+ sym = map__find_symbol(self->map, addr, NULL);
+ } else
+ sym = map__find_symbol_by_name(self->map, target, NULL);
+
+ if (sym != NULL) {
+ u32 *idx = symbol__browser_index(sym);
+
+ self->b.top = &sym->rb_node;
+ self->b.index = self->b.top_idx = *idx;
+ } else
+ ui_helpline__fpush("%s not found!", target);
+
+ return 0;
+}
+
+static int map_browser__run(struct map_browser *self, struct newtExitStruct *es)
+{
+ if (ui_browser__show(&self->b, self->map->dso->long_name,
+ "Press <- or ESC to exit, %s / to search",
+ verbose ? "" : "restart with -v to use") < 0)
+ return -1;
+
+ newtFormAddHotKey(self->b.form, NEWT_KEY_LEFT);
+ newtFormAddHotKey(self->b.form, NEWT_KEY_ENTER);
+ if (verbose)
+ newtFormAddHotKey(self->b.form, '/');
+
+ while (1) {
+ ui_browser__run(&self->b, es);
+
+ if (es->reason != NEWT_EXIT_HOTKEY)
+ break;
+ if (verbose && es->u.key == '/')
+ map_browser__search(self);
+ else
+ break;
+ }
+
+ ui_browser__hide(&self->b);
+ return 0;
+}
+
+int map__browse(struct map *self)
+{
+ struct map_browser mb = {
+ .b = {
+ .entries = &self->dso->symbols[self->type],
+ .refresh = ui_browser__rb_tree_refresh,
+ .seek = ui_browser__rb_tree_seek,
+ .write = map_browser__write,
+ },
+ .map = self,
+ };
+ struct newtExitStruct es;
+ struct rb_node *nd;
+ char tmp[BITS_PER_LONG / 4];
+ u64 maxaddr = 0;
+
+ for (nd = rb_first(mb.b.entries); nd; nd = rb_next(nd)) {
+ struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
+
+ if (mb.namelen < pos->namelen)
+ mb.namelen = pos->namelen;
+ if (maxaddr < pos->end)
+ maxaddr = pos->end;
+ if (verbose) {
+ u32 *idx = symbol__browser_index(pos);
+ *idx = mb.b.nr_entries;
+ }
+ ++mb.b.nr_entries;
+ }
+
+ mb.addrlen = snprintf(tmp, sizeof(tmp), "%llx", maxaddr);
+ mb.b.width += mb.addrlen * 2 + 4 + mb.namelen;
+ return map_browser__run(&mb, &es);
+}
--- /dev/null
+#ifndef _PERF_UI_MAP_BROWSER_H_
+#define _PERF_UI_MAP_BROWSER_H_ 1
+struct map;
+
+int map__browse(struct map *self);
+#endif /* _PERF_UI_MAP_BROWSER_H_ */
--- /dev/null
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <stdlib.h>
+#include <newt.h>
+
+#include "../debug.h"
+#include "helpline.h"
+
+void ui_helpline__pop(void)
+{
+ newtPopHelpLine();
+}
+
+void ui_helpline__push(const char *msg)
+{
+ newtPushHelpLine(msg);
+}
+
+void ui_helpline__vpush(const char *fmt, va_list ap)
+{
+ char *s;
+
+ if (vasprintf(&s, fmt, ap) < 0)
+ vfprintf(stderr, fmt, ap);
+ else {
+ ui_helpline__push(s);
+ free(s);
+ }
+}
+
+void ui_helpline__fpush(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ ui_helpline__vpush(fmt, ap);
+ va_end(ap);
+}
+
+void ui_helpline__puts(const char *msg)
+{
+ ui_helpline__pop();
+ ui_helpline__push(msg);
+}
+
+void ui_helpline__init(void)
+{
+ ui_helpline__puts(" ");
+}
+
+char ui_helpline__last_msg[1024];
+
+int ui_helpline__show_help(const char *format, va_list ap)
+{
+ int ret;
+ static int backlog;
+
+ ret = vsnprintf(ui_helpline__last_msg + backlog,
+ sizeof(ui_helpline__last_msg) - backlog, format, ap);
+ backlog += ret;
+
+ if (ui_helpline__last_msg[backlog - 1] == '\n') {
+ ui_helpline__puts(ui_helpline__last_msg);
+ newtRefresh();
+ backlog = 0;
+ }
+
+ return ret;
+}
--- /dev/null
+#ifndef _PERF_UI_HELPLINE_H_
+#define _PERF_UI_HELPLINE_H_ 1
+
+void ui_helpline__init(void);
+void ui_helpline__pop(void);
+void ui_helpline__push(const char *msg);
+void ui_helpline__vpush(const char *fmt, va_list ap);
+void ui_helpline__fpush(const char *fmt, ...);
+void ui_helpline__puts(const char *msg);
+
+#endif /* _PERF_UI_HELPLINE_H_ */
--- /dev/null
+#ifndef _PERF_UI_SLANG_H_
+#define _PERF_UI_SLANG_H_ 1
+/*
+ * slang versions <= 2.0.6 have a "#if HAVE_LONG_LONG" that breaks
+ * the build if it isn't defined. Use the equivalent one that glibc
+ * has on features.h.
+ */
+#include <features.h>
+#ifndef HAVE_LONG_LONG
+#define HAVE_LONG_LONG __GLIBC_HAVE_LONG_LONG
+#endif
+#include <slang.h>
+
+#if SLANG_VERSION < 20104
+#define slsmg_printf(msg, args...) \
+ SLsmg_printf((char *)msg, ##args)
+#define slsmg_write_nstring(msg, len) \
+ SLsmg_write_nstring((char *)msg, len)
+#define sltt_set_color(obj, name, fg, bg) \
+ SLtt_set_color(obj,(char *)name, (char *)fg, (char *)bg)
+#else
+#define slsmg_printf SLsmg_printf
+#define slsmg_write_nstring SLsmg_write_nstring
+#define sltt_set_color SLtt_set_color
+#endif
+
+#endif /* _PERF_UI_SLANG_H_ */
--- /dev/null
+#include <stdlib.h>
+#include <newt.h>
+#include "../cache.h"
+#include "progress.h"
+
+struct ui_progress {
+ newtComponent form, scale;
+};
+
+struct ui_progress *ui_progress__new(const char *title, u64 total)
+{
+ struct ui_progress *self = malloc(sizeof(*self));
+
+ if (self != NULL) {
+ int cols;
+
+ if (use_browser <= 0)
+ return self;
+ newtGetScreenSize(&cols, NULL);
+ cols -= 4;
+ newtCenteredWindow(cols, 1, title);
+ self->form = newtForm(NULL, NULL, 0);
+ if (self->form == NULL)
+ goto out_free_self;
+ self->scale = newtScale(0, 0, cols, total);
+ if (self->scale == NULL)
+ goto out_free_form;
+ newtFormAddComponent(self->form, self->scale);
+ newtRefresh();
+ }
+
+ return self;
+
+out_free_form:
+ newtFormDestroy(self->form);
+out_free_self:
+ free(self);
+ return NULL;
+}
+
+void ui_progress__update(struct ui_progress *self, u64 curr)
+{
+ /*
+ * FIXME: We should have a per UI backend way of showing progress,
+ * stdio will just show a percentage as NN%, etc.
+ */
+ if (use_browser <= 0)
+ return;
+ newtScaleSet(self->scale, curr);
+ newtRefresh();
+}
+
+void ui_progress__delete(struct ui_progress *self)
+{
+ if (use_browser > 0) {
+ newtFormDestroy(self->form);
+ newtPopWindow();
+ }
+ free(self);
+}
--- /dev/null
+#ifndef _PERF_UI_PROGRESS_H_
+#define _PERF_UI_PROGRESS_H_ 1
+
+struct ui_progress;
+
+struct ui_progress *ui_progress__new(const char *title, u64 total);
+void ui_progress__delete(struct ui_progress *self);
+
+void ui_progress__update(struct ui_progress *self, u64 curr);
+
+#endif
--- /dev/null
+#include <newt.h>
+#include <signal.h>
+#include <stdbool.h>
+
+#include "../cache.h"
+#include "../debug.h"
+#include "browser.h"
+#include "helpline.h"
+
+static void newt_suspend(void *d __used)
+{
+ newtSuspend();
+ raise(SIGTSTP);
+ newtResume();
+}
+
+void setup_browser(void)
+{
+ if (!isatty(1) || !use_browser || dump_trace) {
+ use_browser = 0;
+ setup_pager();
+ return;
+ }
+
+ use_browser = 1;
+ newtInit();
+ newtCls();
+ newtSetSuspendCallback(newt_suspend, NULL);
+ ui_helpline__init();
+ ui_browser__init();
+}
+
+void exit_browser(bool wait_for_ok)
+{
+ if (use_browser > 0) {
+ if (wait_for_ok) {
+ char title[] = "Fatal Error", ok[] = "Ok";
+ newtWinMessage(title, ok, ui_helpline__last_msg);
+ }
+ newtFinished();
+ }
+}
--- /dev/null
+#include <newt.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <string.h>
+#include <sys/ttydefaults.h>
+
+#include "../cache.h"
+#include "../debug.h"
+#include "browser.h"
+#include "helpline.h"
+#include "util.h"
+
+newtComponent newt_form__new(void);
+
+static void newt_form__set_exit_keys(newtComponent self)
+{
+ newtFormAddHotKey(self, NEWT_KEY_LEFT);
+ newtFormAddHotKey(self, NEWT_KEY_ESCAPE);
+ newtFormAddHotKey(self, 'Q');
+ newtFormAddHotKey(self, 'q');
+ newtFormAddHotKey(self, CTRL('c'));
+}
+
+newtComponent newt_form__new(void)
+{
+ newtComponent self = newtForm(NULL, NULL, 0);
+ if (self)
+ newt_form__set_exit_keys(self);
+ return self;
+}
+
+int ui__popup_menu(int argc, char * const argv[])
+{
+ struct newtExitStruct es;
+ int i, rc = -1, max_len = 5;
+ newtComponent listbox, form = newt_form__new();
+
+ if (form == NULL)
+ return -1;
+
+ listbox = newtListbox(0, 0, argc, NEWT_FLAG_RETURNEXIT);
+ if (listbox == NULL)
+ goto out_destroy_form;
+
+ newtFormAddComponent(form, listbox);
+
+ for (i = 0; i < argc; ++i) {
+ int len = strlen(argv[i]);
+ if (len > max_len)
+ max_len = len;
+ if (newtListboxAddEntry(listbox, argv[i], (void *)(long)i))
+ goto out_destroy_form;
+ }
+
+ newtCenteredWindow(max_len, argc, NULL);
+ newtFormRun(form, &es);
+ rc = newtListboxGetCurrent(listbox) - NULL;
+ if (es.reason == NEWT_EXIT_HOTKEY)
+ rc = -1;
+ newtPopWindow();
+out_destroy_form:
+ newtFormDestroy(form);
+ return rc;
+}
+
+int ui__help_window(const char *text)
+{
+ struct newtExitStruct es;
+ newtComponent tb, form = newt_form__new();
+ int rc = -1;
+ int max_len = 0, nr_lines = 0;
+ const char *t;
+
+ if (form == NULL)
+ return -1;
+
+ t = text;
+ while (1) {
+ const char *sep = strchr(t, '\n');
+ int len;
+
+ if (sep == NULL)
+ sep = strchr(t, '\0');
+ len = sep - t;
+ if (max_len < len)
+ max_len = len;
+ ++nr_lines;
+ if (*sep == '\0')
+ break;
+ t = sep + 1;
+ }
+
+ tb = newtTextbox(0, 0, max_len, nr_lines, 0);
+ if (tb == NULL)
+ goto out_destroy_form;
+
+ newtTextboxSetText(tb, text);
+ newtFormAddComponent(form, tb);
+ newtCenteredWindow(max_len, nr_lines, NULL);
+ newtFormRun(form, &es);
+ newtPopWindow();
+ rc = 0;
+out_destroy_form:
+ newtFormDestroy(form);
+ return rc;
+}
+
+bool ui__dialog_yesno(const char *msg)
+{
+ /* newtWinChoice should really be accepting const char pointers... */
+ char yes[] = "Yes", no[] = "No";
+ return newtWinChoice(NULL, yes, no, (char *)msg) == 1;
+}
--- /dev/null
+#ifndef _PERF_UI_UTIL_H_
+#define _PERF_UI_UTIL_H_ 1
+
+#include <stdbool.h>
+
+int ui__popup_menu(int argc, char * const argv[]);
+int ui__help_window(const char *text);
+bool ui__dialog_yesno(const char *msg);
+
+#endif /* _PERF_UI_UTIL_H_ */
projects / firefly-linux-kernel-4.4.55.git / commitdiff